Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

9 files changed, 2754 insertions, 0 deletions

diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile
new file mode 100644
index 000000000..fc17b3f13
--- /dev/null
+++ b/arch/x86/kernel/acpi/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_ACPI)		+= boot.o
+obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup_$(BITS).o
+obj-$(CONFIG_ACPI_APEI)		+= apei.o
+obj-$(CONFIG_ACPI_CPPC_LIB)	+= cppc.o
+
+ifneq ($(CONFIG_ACPI_PROCESSOR),)
+obj-y				+= cstate.o
+endif
+
diff --git a/arch/x86/kernel/acpi/apei.c b/arch/x86/kernel/acpi/apei.c
new file mode 100644
index 000000000..0916f00a9
--- /dev/null
+++ b/arch/x86/kernel/acpi/apei.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Arch-specific APEI-related functions.
+ */
+
+#include <acpi/apei.h>
+
+#include <asm/mce.h>
+#include <asm/tlbflush.h>
+
+int arch_apei_enable_cmcff(struct acpi_hest_header *hest_hdr, void *data)
+{
+#ifdef CONFIG_X86_MCE
+	int i;
+	struct acpi_hest_ia_corrected *cmc;
+	struct acpi_hest_ia_error_bank *mc_bank;
+
+	cmc = (struct acpi_hest_ia_corrected *)hest_hdr;
+	if (!cmc->enabled)
+		return 0;
+
+	/*
+	 * We expect HEST to provide a list of MC banks that report errors
+	 * in firmware first mode. Otherwise, return non-zero value to
+	 * indicate that we are done parsing HEST.
+	 */
+	if (!(cmc->flags & ACPI_HEST_FIRMWARE_FIRST) ||
+	    !cmc->num_hardware_banks)
+		return 1;
+
+	pr_info("HEST: Enabling Firmware First mode for corrected errors.\n");
+
+	mc_bank = (struct acpi_hest_ia_error_bank *)(cmc + 1);
+	for (i = 0; i < cmc->num_hardware_banks; i++, mc_bank++)
+		mce_disable_bank(mc_bank->bank_number);
+#endif
+	return 1;
+}
+
+void arch_apei_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
+{
+#ifdef CONFIG_X86_MCE
+	apei_mce_report_mem_error(sev, mem_err);
+#endif
+}
+
+int arch_apei_report_x86_error(struct cper_ia_proc_ctx *ctx_info, u64 lapic_id)
+{
+	return apei_smca_report_x86_error(ctx_info, lapic_id);
+}
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
new file mode 100644
index 000000000..2252340b2
--- /dev/null
+++ b/arch/x86/kernel/acpi/boot.c
@@ -0,0 +1,1898 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  boot.c - Architecture-Specific Low-Level ACPI Boot Support
+ *
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
+ */
+#define pr_fmt(fmt) "ACPI: " fmt
+
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/acpi_pmtmr.h>
+#include <linux/efi.h>
+#include <linux/cpumask.h>
+#include <linux/export.h>
+#include <linux/dmi.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/memblock.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/efi-bgrt.h>
+#include <linux/serial_core.h>
+#include <linux/pgtable.h>
+
+#include <asm/e820/api.h>
+#include <asm/irqdomain.h>
+#include <asm/pci_x86.h>
+#include <asm/io_apic.h>
+#include <asm/apic.h>
+#include <asm/io.h>
+#include <asm/mpspec.h>
+#include <asm/smp.h>
+#include <asm/i8259.h>
+#include <asm/setup.h>
+
+#include "sleep.h" /* To include x86_acpi_suspend_lowlevel */
+static int __initdata acpi_force = 0;
+int acpi_disabled;
+EXPORT_SYMBOL(acpi_disabled);
+
+#ifdef	CONFIG_X86_64
+# include <asm/proto.h>
+#endif				/* X86 */
+
+int acpi_noirq;				/* skip ACPI IRQ initialization */
+static int acpi_nobgrt;			/* skip ACPI BGRT */
+int acpi_pci_disabled;		/* skip ACPI PCI scan and IRQ initialization */
+EXPORT_SYMBOL(acpi_pci_disabled);
+
+int acpi_lapic;
+int acpi_ioapic;
+int acpi_strict;
+int acpi_disable_cmcff;
+
+/* ACPI SCI override configuration */
+u8 acpi_sci_flags __initdata;
+u32 acpi_sci_override_gsi __initdata = INVALID_ACPI_IRQ;
+int acpi_skip_timer_override __initdata;
+int acpi_use_timer_override __initdata;
+int acpi_fix_pin2_polarity __initdata;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
+static bool acpi_support_online_capable;
+#endif
+
+#ifdef CONFIG_X86_64
+/* Physical address of the Multiprocessor Wakeup Structure mailbox */
+static u64 acpi_mp_wake_mailbox_paddr;
+/* Virtual address of the Multiprocessor Wakeup Structure mailbox */
+static struct acpi_madt_multiproc_wakeup_mailbox *acpi_mp_wake_mailbox;
+#endif
+
+#ifdef CONFIG_X86_IO_APIC
+/*
+ * Locks related to IOAPIC hotplug
+ * Hotplug side:
+ *	->device_hotplug_lock
+ *		->acpi_ioapic_lock
+ *			->ioapic_lock
+ * Interrupt mapping side:
+ *	->acpi_ioapic_lock
+ *		->ioapic_mutex
+ *			->ioapic_lock
+ */
+static DEFINE_MUTEX(acpi_ioapic_lock);
+#endif
+
+/* --------------------------------------------------------------------------
+                              Boot-time Configuration
+   -------------------------------------------------------------------------- */
+
+/*
+ * The default interrupt routing model is PIC (8259).  This gets
+ * overridden if IOAPICs are enumerated (below).
+ */
+enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
+
+
+/*
+ * ISA irqs by default are the first 16 gsis but can be
+ * any gsi as specified by an interrupt source override.
+ */
+static u32 isa_irq_to_gsi[NR_IRQS_LEGACY] __read_mostly = {
+	0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+};
+
+/*
+ * This is just a simple wrapper around early_memremap(),
+ * with sanity checks for phys == 0 and size == 0.
+ */
+void __init __iomem *__acpi_map_table(unsigned long phys, unsigned long size)
+{
+
+	if (!phys || !size)
+		return NULL;
+
+	return early_memremap(phys, size);
+}
+
+void __init __acpi_unmap_table(void __iomem *map, unsigned long size)
+{
+	if (!map || !size)
+		return;
+
+	early_memunmap(map, size);
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static int __init acpi_parse_madt(struct acpi_table_header *table)
+{
+	struct acpi_table_madt *madt = NULL;
+
+	if (!boot_cpu_has(X86_FEATURE_APIC))
+		return -EINVAL;
+
+	madt = (struct acpi_table_madt *)table;
+	if (!madt) {
+		pr_warn("Unable to map MADT\n");
+		return -ENODEV;
+	}
+
+	if (madt->address) {
+		acpi_lapic_addr = (u64) madt->address;
+
+		pr_debug("Local APIC address 0x%08x\n", madt->address);
+	}
+
+	if (madt->flags & ACPI_MADT_PCAT_COMPAT)
+		legacy_pic_pcat_compat();
+
+	/* ACPI 6.3 and newer support the online capable bit. */
+	if (acpi_gbl_FADT.header.revision > 6 ||
+	    (acpi_gbl_FADT.header.revision == 6 &&
+	     acpi_gbl_FADT.minor_revision >= 3))
+		acpi_support_online_capable = true;
+
+	default_acpi_madt_oem_check(madt->header.oem_id,
+				    madt->header.oem_table_id);
+
+	return 0;
+}
+
+/**
+ * acpi_register_lapic - register a local apic and generates a logic cpu number
+ * @id: local apic id to register
+ * @acpiid: ACPI id to register
+ * @enabled: this cpu is enabled or not
+ *
+ * Returns the logic cpu number which maps to the local apic
+ */
+static int acpi_register_lapic(int id, u32 acpiid, u8 enabled)
+{
+	unsigned int ver = 0;
+	int cpu;
+
+	if (id >= MAX_LOCAL_APIC) {
+		pr_info("skipped apicid that is too big\n");
+		return -EINVAL;
+	}
+
+	if (!enabled) {
+		++disabled_cpus;
+		return -EINVAL;
+	}
+
+	if (boot_cpu_physical_apicid != -1U)
+		ver = boot_cpu_apic_version;
+
+	cpu = generic_processor_info(id, ver);
+	if (cpu >= 0)
+		early_per_cpu(x86_cpu_to_acpiid, cpu) = acpiid;
+
+	return cpu;
+}
+
+static bool __init acpi_is_processor_usable(u32 lapic_flags)
+{
+	if (lapic_flags & ACPI_MADT_ENABLED)
+		return true;
+
+	if (!acpi_support_online_capable ||
+	    (lapic_flags & ACPI_MADT_ONLINE_CAPABLE))
+		return true;
+
+	return false;
+}
+
+static int __init
+acpi_parse_x2apic(union acpi_subtable_headers *header, const unsigned long end)
+{
+	struct acpi_madt_local_x2apic *processor = NULL;
+#ifdef CONFIG_X86_X2APIC
+	u32 apic_id;
+	u8 enabled;
+#endif
+
+	processor = (struct acpi_madt_local_x2apic *)header;
+
+	if (BAD_MADT_ENTRY(processor, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(&header->common);
+
+#ifdef CONFIG_X86_X2APIC
+	apic_id = processor->local_apic_id;
+	enabled = processor->lapic_flags & ACPI_MADT_ENABLED;
+
+	/* Ignore invalid ID */
+	if (apic_id == 0xffffffff)
+		return 0;
+
+	/* don't register processors that cannot be onlined */
+	if (!acpi_is_processor_usable(processor->lapic_flags))
+		return 0;
+
+	/*
+	 * We need to register disabled CPU as well to permit
+	 * counting disabled CPUs. This allows us to size
+	 * cpus_possible_map more accurately, to permit
+	 * to not preallocating memory for all NR_CPUS
+	 * when we use CPU hotplug.
+	 */
+	if (!apic->apic_id_valid(apic_id)) {
+		if (enabled)
+			pr_warn("x2apic entry ignored\n");
+		return 0;
+	}
+
+	acpi_register_lapic(apic_id, processor->uid, enabled);
+#else
+	pr_warn("x2apic entry ignored\n");
+#endif
+
+	return 0;
+}
+
+static int __init
+acpi_parse_lapic(union acpi_subtable_headers * header, const unsigned long end)
+{
+	struct acpi_madt_local_apic *processor = NULL;
+
+	processor = (struct acpi_madt_local_apic *)header;
+
+	if (BAD_MADT_ENTRY(processor, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(&header->common);
+
+	/* Ignore invalid ID */
+	if (processor->id == 0xff)
+		return 0;
+
+	/* don't register processors that can not be onlined */
+	if (!acpi_is_processor_usable(processor->lapic_flags))
+		return 0;
+
+	/*
+	 * We need to register disabled CPU as well to permit
+	 * counting disabled CPUs. This allows us to size
+	 * cpus_possible_map more accurately, to permit
+	 * to not preallocating memory for all NR_CPUS
+	 * when we use CPU hotplug.
+	 */
+	acpi_register_lapic(processor->id,	/* APIC ID */
+			    processor->processor_id, /* ACPI ID */
+			    processor->lapic_flags & ACPI_MADT_ENABLED);
+
+	return 0;
+}
+
+static int __init
+acpi_parse_sapic(union acpi_subtable_headers *header, const unsigned long end)
+{
+	struct acpi_madt_local_sapic *processor = NULL;
+
+	processor = (struct acpi_madt_local_sapic *)header;
+
+	if (BAD_MADT_ENTRY(processor, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(&header->common);
+
+	acpi_register_lapic((processor->id << 8) | processor->eid,/* APIC ID */
+			    processor->processor_id, /* ACPI ID */
+			    processor->lapic_flags & ACPI_MADT_ENABLED);
+
+	return 0;
+}
+
+static int __init
+acpi_parse_lapic_addr_ovr(union acpi_subtable_headers * header,
+			  const unsigned long end)
+{
+	struct acpi_madt_local_apic_override *lapic_addr_ovr = NULL;
+
+	lapic_addr_ovr = (struct acpi_madt_local_apic_override *)header;
+
+	if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(&header->common);
+
+	acpi_lapic_addr = lapic_addr_ovr->address;
+
+	return 0;
+}
+
+static int __init
+acpi_parse_x2apic_nmi(union acpi_subtable_headers *header,
+		      const unsigned long end)
+{
+	struct acpi_madt_local_x2apic_nmi *x2apic_nmi = NULL;
+
+	x2apic_nmi = (struct acpi_madt_local_x2apic_nmi *)header;
+
+	if (BAD_MADT_ENTRY(x2apic_nmi, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(&header->common);
+
+	if (x2apic_nmi->lint != 1)
+		pr_warn("NMI not connected to LINT 1!\n");
+
+	return 0;
+}
+
+static int __init
+acpi_parse_lapic_nmi(union acpi_subtable_headers * header, const unsigned long end)
+{
+	struct acpi_madt_local_apic_nmi *lapic_nmi = NULL;
+
+	lapic_nmi = (struct acpi_madt_local_apic_nmi *)header;
+
+	if (BAD_MADT_ENTRY(lapic_nmi, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(&header->common);
+
+	if (lapic_nmi->lint != 1)
+		pr_warn("NMI not connected to LINT 1!\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_X86_64
+static int acpi_wakeup_cpu(int apicid, unsigned long start_ip)
+{
+	/*
+	 * Remap mailbox memory only for the first call to acpi_wakeup_cpu().
+	 *
+	 * Wakeup of secondary CPUs is fully serialized in the core code.
+	 * No need to protect acpi_mp_wake_mailbox from concurrent accesses.
+	 */
+	if (!acpi_mp_wake_mailbox) {
+		acpi_mp_wake_mailbox = memremap(acpi_mp_wake_mailbox_paddr,
+						sizeof(*acpi_mp_wake_mailbox),
+						MEMREMAP_WB);
+	}
+
+	/*
+	 * Mailbox memory is shared between the firmware and OS. Firmware will
+	 * listen on mailbox command address, and once it receives the wakeup
+	 * command, the CPU associated with the given apicid will be booted.
+	 *
+	 * The value of 'apic_id' and 'wakeup_vector' must be visible to the
+	 * firmware before the wakeup command is visible.  smp_store_release()
+	 * ensures ordering and visibility.
+	 */
+	acpi_mp_wake_mailbox->apic_id	    = apicid;
+	acpi_mp_wake_mailbox->wakeup_vector = start_ip;
+	smp_store_release(&acpi_mp_wake_mailbox->command,
+			  ACPI_MP_WAKE_COMMAND_WAKEUP);
+
+	/*
+	 * Wait for the CPU to wake up.
+	 *
+	 * The CPU being woken up is essentially in a spin loop waiting to be
+	 * woken up. It should not take long for it wake up and acknowledge by
+	 * zeroing out ->command.
+	 *
+	 * ACPI specification doesn't provide any guidance on how long kernel
+	 * has to wait for a wake up acknowledgement. It also doesn't provide
+	 * a way to cancel a wake up request if it takes too long.
+	 *
+	 * In TDX environment, the VMM has control over how long it takes to
+	 * wake up secondary. It can postpone scheduling secondary vCPU
+	 * indefinitely. Giving up on wake up request and reporting error opens
+	 * possible attack vector for VMM: it can wake up a secondary CPU when
+	 * kernel doesn't expect it. Wait until positive result of the wake up
+	 * request.
+	 */
+	while (READ_ONCE(acpi_mp_wake_mailbox->command))
+		cpu_relax();
+
+	return 0;
+}
+#endif /* CONFIG_X86_64 */
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#ifdef CONFIG_X86_IO_APIC
+#define MP_ISA_BUS		0
+
+static int __init mp_register_ioapic_irq(u8 bus_irq, u8 polarity,
+						u8 trigger, u32 gsi);
+
+static void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
+					  u32 gsi)
+{
+	/*
+	 * Check bus_irq boundary.
+	 */
+	if (bus_irq >= NR_IRQS_LEGACY) {
+		pr_warn("Invalid bus_irq %u for legacy override\n", bus_irq);
+		return;
+	}
+
+	/*
+	 * TBD: This check is for faulty timer entries, where the override
+	 *      erroneously sets the trigger to level, resulting in a HUGE
+	 *      increase of timer interrupts!
+	 */
+	if ((bus_irq == 0) && (trigger == 3))
+		trigger = 1;
+
+	if (mp_register_ioapic_irq(bus_irq, polarity, trigger, gsi) < 0)
+		return;
+	/*
+	 * Reset default identity mapping if gsi is also an legacy IRQ,
+	 * otherwise there will be more than one entry with the same GSI
+	 * and acpi_isa_irq_to_gsi() may give wrong result.
+	 */
+	if (gsi < nr_legacy_irqs() && isa_irq_to_gsi[gsi] == gsi)
+		isa_irq_to_gsi[gsi] = INVALID_ACPI_IRQ;
+	isa_irq_to_gsi[bus_irq] = gsi;
+}
+
+static void mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
+			int polarity)
+{
+#ifdef CONFIG_X86_MPPARSE
+	struct mpc_intsrc mp_irq;
+	struct pci_dev *pdev;
+	unsigned char number;
+	unsigned int devfn;
+	int ioapic;
+	u8 pin;
+
+	if (!acpi_ioapic)
+		return;
+	if (!dev || !dev_is_pci(dev))
+		return;
+
+	pdev = to_pci_dev(dev);
+	number = pdev->bus->number;
+	devfn = pdev->devfn;
+	pin = pdev->pin;
+	/* print the entry should happen on mptable identically */
+	mp_irq.type = MP_INTSRC;
+	mp_irq.irqtype = mp_INT;
+	mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+				(polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+	mp_irq.srcbus = number;
+	mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+	ioapic = mp_find_ioapic(gsi);
+	mp_irq.dstapic = mpc_ioapic_id(ioapic);
+	mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+	mp_save_irq(&mp_irq);
+#endif
+}
+
+static int __init mp_register_ioapic_irq(u8 bus_irq, u8 polarity,
+						u8 trigger, u32 gsi)
+{
+	struct mpc_intsrc mp_irq;
+	int ioapic, pin;
+
+	/* Convert 'gsi' to 'ioapic.pin'(INTIN#) */
+	ioapic = mp_find_ioapic(gsi);
+	if (ioapic < 0) {
+		pr_warn("Failed to find ioapic for gsi : %u\n", gsi);
+		return ioapic;
+	}
+
+	pin = mp_find_ioapic_pin(ioapic, gsi);
+
+	mp_irq.type = MP_INTSRC;
+	mp_irq.irqtype = mp_INT;
+	mp_irq.irqflag = (trigger << 2) | polarity;
+	mp_irq.srcbus = MP_ISA_BUS;
+	mp_irq.srcbusirq = bus_irq;
+	mp_irq.dstapic = mpc_ioapic_id(ioapic);
+	mp_irq.dstirq = pin;
+
+	mp_save_irq(&mp_irq);
+
+	return 0;
+}
+
+static int __init
+acpi_parse_ioapic(union acpi_subtable_headers * header, const unsigned long end)
+{
+	struct acpi_madt_io_apic *ioapic = NULL;
+	struct ioapic_domain_cfg cfg = {
+		.type = IOAPIC_DOMAIN_DYNAMIC,
+		.ops = &mp_ioapic_irqdomain_ops,
+	};
+
+	ioapic = (struct acpi_madt_io_apic *)header;
+
+	if (BAD_MADT_ENTRY(ioapic, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(&header->common);
+
+	/* Statically assign IRQ numbers for IOAPICs hosting legacy IRQs */
+	if (ioapic->global_irq_base < nr_legacy_irqs())
+		cfg.type = IOAPIC_DOMAIN_LEGACY;
+
+	mp_register_ioapic(ioapic->id, ioapic->address, ioapic->global_irq_base,
+			   &cfg);
+
+	return 0;
+}
+
+/*
+ * Parse Interrupt Source Override for the ACPI SCI
+ */
+static void __init acpi_sci_ioapic_setup(u8 bus_irq, u16 polarity, u16 trigger, u32 gsi)
+{
+	if (trigger == 0)	/* compatible SCI trigger is level */
+		trigger = 3;
+
+	if (polarity == 0)	/* compatible SCI polarity is low */
+		polarity = 3;
+
+	/* Command-line over-ride via acpi_sci= */
+	if (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)
+		trigger = (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2;
+
+	if (acpi_sci_flags & ACPI_MADT_POLARITY_MASK)
+		polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK;
+
+	if (bus_irq < NR_IRQS_LEGACY)
+		mp_override_legacy_irq(bus_irq, polarity, trigger, gsi);
+	else
+		mp_register_ioapic_irq(bus_irq, polarity, trigger, gsi);
+
+	acpi_penalize_sci_irq(bus_irq, trigger, polarity);
+
+	/*
+	 * stash over-ride to indicate we've been here
+	 * and for later update of acpi_gbl_FADT
+	 */
+	acpi_sci_override_gsi = gsi;
+	return;
+}
+
+static int __init
+acpi_parse_int_src_ovr(union acpi_subtable_headers * header,
+		       const unsigned long end)
+{
+	struct acpi_madt_interrupt_override *intsrc = NULL;
+
+	intsrc = (struct acpi_madt_interrupt_override *)header;
+
+	if (BAD_MADT_ENTRY(intsrc, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(&header->common);
+
+	if (intsrc->source_irq == acpi_gbl_FADT.sci_interrupt) {
+		acpi_sci_ioapic_setup(intsrc->source_irq,
+				      intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
+				      (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2,
+				      intsrc->global_irq);
+		return 0;
+	}
+
+	if (intsrc->source_irq == 0) {
+		if (acpi_skip_timer_override) {
+			pr_warn("BIOS IRQ0 override ignored.\n");
+			return 0;
+		}
+
+		if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity
+			&& (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
+			intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
+			pr_warn("BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
+		}
+	}
+
+	mp_override_legacy_irq(intsrc->source_irq,
+				intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
+				(intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2,
+				intsrc->global_irq);
+
+	return 0;
+}
+
+static int __init
+acpi_parse_nmi_src(union acpi_subtable_headers * header, const unsigned long end)
+{
+	struct acpi_madt_nmi_source *nmi_src = NULL;
+
+	nmi_src = (struct acpi_madt_nmi_source *)header;
+
+	if (BAD_MADT_ENTRY(nmi_src, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(&header->common);
+
+	/* TBD: Support nimsrc entries? */
+
+	return 0;
+}
+
+#endif				/* CONFIG_X86_IO_APIC */
+
+/*
+ * acpi_pic_sci_set_trigger()
+ *
+ * use ELCR to set PIC-mode trigger type for SCI
+ *
+ * If a PIC-mode SCI is not recognized or gives spurious IRQ7's
+ * it may require Edge Trigger -- use "acpi_sci=edge"
+ *
+ * Port 0x4d0-4d1 are ELCR1 and ELCR2, the Edge/Level Control Registers
+ * for the 8259 PIC.  bit[n] = 1 means irq[n] is Level, otherwise Edge.
+ * ELCR1 is IRQs 0-7 (IRQ 0, 1, 2 must be 0)
+ * ELCR2 is IRQs 8-15 (IRQ 8, 13 must be 0)
+ */
+
+void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
+{
+	unsigned int mask = 1 << irq;
+	unsigned int old, new;
+
+	/* Real old ELCR mask */
+	old = inb(PIC_ELCR1) | (inb(PIC_ELCR2) << 8);
+
+	/*
+	 * If we use ACPI to set PCI IRQs, then we should clear ELCR
+	 * since we will set it correctly as we enable the PCI irq
+	 * routing.
+	 */
+	new = acpi_noirq ? old : 0;
+
+	/*
+	 * Update SCI information in the ELCR, it isn't in the PCI
+	 * routing tables..
+	 */
+	switch (trigger) {
+	case 1:		/* Edge - clear */
+		new &= ~mask;
+		break;
+	case 3:		/* Level - set */
+		new |= mask;
+		break;
+	}
+
+	if (old == new)
+		return;
+
+	pr_warn("setting ELCR to %04x (from %04x)\n", new, old);
+	outb(new, PIC_ELCR1);
+	outb(new >> 8, PIC_ELCR2);
+}
+
+int acpi_gsi_to_irq(u32 gsi, unsigned int *irqp)
+{
+	int rc, irq, trigger, polarity;
+
+	if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
+		*irqp = gsi;
+		return 0;
+	}
+
+	rc = acpi_get_override_irq(gsi, &trigger, &polarity);
+	if (rc)
+		return rc;
+
+	trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
+	polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
+	irq = acpi_register_gsi(NULL, gsi, trigger, polarity);
+	if (irq < 0)
+		return irq;
+
+	*irqp = irq;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
+
+int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
+{
+	if (isa_irq < nr_legacy_irqs() &&
+	    isa_irq_to_gsi[isa_irq] != INVALID_ACPI_IRQ) {
+		*gsi = isa_irq_to_gsi[isa_irq];
+		return 0;
+	}
+
+	return -1;
+}
+
+static int acpi_register_gsi_pic(struct device *dev, u32 gsi,
+				 int trigger, int polarity)
+{
+#ifdef CONFIG_PCI
+	/*
+	 * Make sure all (legacy) PCI IRQs are set as level-triggered.
+	 */
+	if (trigger == ACPI_LEVEL_SENSITIVE)
+		elcr_set_level_irq(gsi);
+#endif
+
+	return gsi;
+}
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi,
+				    int trigger, int polarity)
+{
+	int irq = gsi;
+#ifdef CONFIG_X86_IO_APIC
+	int node;
+	struct irq_alloc_info info;
+
+	node = dev ? dev_to_node(dev) : NUMA_NO_NODE;
+	trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1;
+	polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1;
+	ioapic_set_alloc_attr(&info, node, trigger, polarity);
+
+	mutex_lock(&acpi_ioapic_lock);
+	irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC, &info);
+	/* Don't set up the ACPI SCI because it's already set up */
+	if (irq >= 0 && enable_update_mptable && gsi != acpi_gbl_FADT.sci_interrupt)
+		mp_config_acpi_gsi(dev, gsi, trigger, polarity);
+	mutex_unlock(&acpi_ioapic_lock);
+#endif
+
+	return irq;
+}
+
+static void acpi_unregister_gsi_ioapic(u32 gsi)
+{
+#ifdef CONFIG_X86_IO_APIC
+	int irq;
+
+	mutex_lock(&acpi_ioapic_lock);
+	irq = mp_map_gsi_to_irq(gsi, 0, NULL);
+	if (irq > 0)
+		mp_unmap_irq(irq);
+	mutex_unlock(&acpi_ioapic_lock);
+#endif
+}
+#endif
+
+int (*__acpi_register_gsi)(struct device *dev, u32 gsi,
+			   int trigger, int polarity) = acpi_register_gsi_pic;
+void (*__acpi_unregister_gsi)(u32 gsi) = NULL;
+
+#ifdef CONFIG_ACPI_SLEEP
+int (*acpi_suspend_lowlevel)(void) = x86_acpi_suspend_lowlevel;
+#else
+int (*acpi_suspend_lowlevel)(void);
+#endif
+
+/*
+ * success: return IRQ number (>=0)
+ * failure: return < 0
+ */
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
+{
+	return __acpi_register_gsi(dev, gsi, trigger, polarity);
+}
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
+
+void acpi_unregister_gsi(u32 gsi)
+{
+	if (__acpi_unregister_gsi)
+		__acpi_unregister_gsi(gsi);
+}
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static void __init acpi_set_irq_model_ioapic(void)
+{
+	acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
+	__acpi_register_gsi = acpi_register_gsi_ioapic;
+	__acpi_unregister_gsi = acpi_unregister_gsi_ioapic;
+	acpi_ioapic = 1;
+}
+#endif
+
+/*
+ *  ACPI based hotplug support for CPU
+ */
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+#include <acpi/processor.h>
+
+static int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+{
+#ifdef CONFIG_ACPI_NUMA
+	int nid;
+
+	nid = acpi_get_node(handle);
+	if (nid != NUMA_NO_NODE) {
+		set_apicid_to_node(physid, nid);
+		numa_set_node(cpu, nid);
+	}
+#endif
+	return 0;
+}
+
+int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id,
+		 int *pcpu)
+{
+	int cpu;
+
+	cpu = acpi_register_lapic(physid, acpi_id, ACPI_MADT_ENABLED);
+	if (cpu < 0) {
+		pr_info("Unable to map lapic to logical cpu number\n");
+		return cpu;
+	}
+
+	acpi_processor_set_pdc(handle);
+	acpi_map_cpu2node(handle, cpu, physid);
+
+	*pcpu = cpu;
+	return 0;
+}
+EXPORT_SYMBOL(acpi_map_cpu);
+
+int acpi_unmap_cpu(int cpu)
+{
+#ifdef CONFIG_ACPI_NUMA
+	set_apicid_to_node(per_cpu(x86_cpu_to_apicid, cpu), NUMA_NO_NODE);
+#endif
+
+	per_cpu(x86_cpu_to_apicid, cpu) = -1;
+	set_cpu_present(cpu, false);
+	num_processors--;
+
+	return (0);
+}
+EXPORT_SYMBOL(acpi_unmap_cpu);
+#endif				/* CONFIG_ACPI_HOTPLUG_CPU */
+
+int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
+{
+	int ret = -ENOSYS;
+#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
+	int ioapic_id;
+	u64 addr;
+	struct ioapic_domain_cfg cfg = {
+		.type = IOAPIC_DOMAIN_DYNAMIC,
+		.ops = &mp_ioapic_irqdomain_ops,
+	};
+
+	ioapic_id = acpi_get_ioapic_id(handle, gsi_base, &addr);
+	if (ioapic_id < 0) {
+		unsigned long long uid;
+		acpi_status status;
+
+		status = acpi_evaluate_integer(handle, METHOD_NAME__UID,
+					       NULL, &uid);
+		if (ACPI_FAILURE(status)) {
+			acpi_handle_warn(handle, "failed to get IOAPIC ID.\n");
+			return -EINVAL;
+		}
+		ioapic_id = (int)uid;
+	}
+
+	mutex_lock(&acpi_ioapic_lock);
+	ret  = mp_register_ioapic(ioapic_id, phys_addr, gsi_base, &cfg);
+	mutex_unlock(&acpi_ioapic_lock);
+#endif
+
+	return ret;
+}
+EXPORT_SYMBOL(acpi_register_ioapic);
+
+int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
+{
+	int ret = -ENOSYS;
+
+#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
+	mutex_lock(&acpi_ioapic_lock);
+	ret  = mp_unregister_ioapic(gsi_base);
+	mutex_unlock(&acpi_ioapic_lock);
+#endif
+
+	return ret;
+}
+EXPORT_SYMBOL(acpi_unregister_ioapic);
+
+/**
+ * acpi_ioapic_registered - Check whether IOAPIC associated with @gsi_base
+ *			    has been registered
+ * @handle:	ACPI handle of the IOAPIC device
+ * @gsi_base:	GSI base associated with the IOAPIC
+ *
+ * Assume caller holds some type of lock to serialize acpi_ioapic_registered()
+ * with acpi_register_ioapic()/acpi_unregister_ioapic().
+ */
+int acpi_ioapic_registered(acpi_handle handle, u32 gsi_base)
+{
+	int ret = 0;
+
+#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
+	mutex_lock(&acpi_ioapic_lock);
+	ret  = mp_ioapic_registered(gsi_base);
+	mutex_unlock(&acpi_ioapic_lock);
+#endif
+
+	return ret;
+}
+
+static int __init acpi_parse_sbf(struct acpi_table_header *table)
+{
+	struct acpi_table_boot *sb = (struct acpi_table_boot *)table;
+
+	sbf_port = sb->cmos_index;	/* Save CMOS port */
+
+	return 0;
+}
+
+#ifdef CONFIG_HPET_TIMER
+#include <asm/hpet.h>
+
+static struct resource *hpet_res __initdata;
+
+static int __init acpi_parse_hpet(struct acpi_table_header *table)
+{
+	struct acpi_table_hpet *hpet_tbl = (struct acpi_table_hpet *)table;
+
+	if (hpet_tbl->address.space_id != ACPI_SPACE_MEM) {
+		pr_warn("HPET timers must be located in memory.\n");
+		return -1;
+	}
+
+	hpet_address = hpet_tbl->address.address;
+	hpet_blockid = hpet_tbl->sequence;
+
+	/*
+	 * Some broken BIOSes advertise HPET at 0x0. We really do not
+	 * want to allocate a resource there.
+	 */
+	if (!hpet_address) {
+		pr_warn("HPET id: %#x base: %#lx is invalid\n", hpet_tbl->id, hpet_address);
+		return 0;
+	}
+#ifdef CONFIG_X86_64
+	/*
+	 * Some even more broken BIOSes advertise HPET at
+	 * 0xfed0000000000000 instead of 0xfed00000. Fix it up and add
+	 * some noise:
+	 */
+	if (hpet_address == 0xfed0000000000000UL) {
+		if (!hpet_force_user) {
+			pr_warn("HPET id: %#x base: 0xfed0000000000000 is bogus, try hpet=force on the kernel command line to fix it up to 0xfed00000.\n",
+				hpet_tbl->id);
+			hpet_address = 0;
+			return 0;
+		}
+		pr_warn("HPET id: %#x base: 0xfed0000000000000 fixed up to 0xfed00000.\n",
+			hpet_tbl->id);
+		hpet_address >>= 32;
+	}
+#endif
+	pr_info("HPET id: %#x base: %#lx\n", hpet_tbl->id, hpet_address);
+
+	/*
+	 * Allocate and initialize the HPET firmware resource for adding into
+	 * the resource tree during the lateinit timeframe.
+	 */
+#define HPET_RESOURCE_NAME_SIZE 9
+	hpet_res = memblock_alloc(sizeof(*hpet_res) + HPET_RESOURCE_NAME_SIZE,
+				  SMP_CACHE_BYTES);
+	if (!hpet_res)
+		panic("%s: Failed to allocate %zu bytes\n", __func__,
+		      sizeof(*hpet_res) + HPET_RESOURCE_NAME_SIZE);
+
+	hpet_res->name = (void *)&hpet_res[1];
+	hpet_res->flags = IORESOURCE_MEM;
+	snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE, "HPET %u",
+		 hpet_tbl->sequence);
+
+	hpet_res->start = hpet_address;
+	hpet_res->end = hpet_address + (1 * 1024) - 1;
+
+	return 0;
+}
+
+/*
+ * hpet_insert_resource inserts the HPET resources used into the resource
+ * tree.
+ */
+static __init int hpet_insert_resource(void)
+{
+	if (!hpet_res)
+		return 1;
+
+	return insert_resource(&iomem_resource, hpet_res);
+}
+
+late_initcall(hpet_insert_resource);
+
+#else
+#define	acpi_parse_hpet	NULL
+#endif
+
+static int __init acpi_parse_fadt(struct acpi_table_header *table)
+{
+	if (!(acpi_gbl_FADT.boot_flags & ACPI_FADT_LEGACY_DEVICES)) {
+		pr_debug("no legacy devices present\n");
+		x86_platform.legacy.devices.pnpbios = 0;
+	}
+
+	if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+	    !(acpi_gbl_FADT.boot_flags & ACPI_FADT_8042) &&
+	    x86_platform.legacy.i8042 != X86_LEGACY_I8042_PLATFORM_ABSENT) {
+		pr_debug("i8042 controller is absent\n");
+		x86_platform.legacy.i8042 = X86_LEGACY_I8042_FIRMWARE_ABSENT;
+	}
+
+	if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_CMOS_RTC) {
+		pr_debug("not registering RTC platform device\n");
+		x86_platform.legacy.rtc = 0;
+	}
+
+	if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_VGA) {
+		pr_debug("probing for VGA not safe\n");
+		x86_platform.legacy.no_vga = 1;
+	}
+
+#ifdef CONFIG_X86_PM_TIMER
+	/* detect the location of the ACPI PM Timer */
+	if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) {
+		/* FADT rev. 2 */
+		if (acpi_gbl_FADT.xpm_timer_block.space_id !=
+		    ACPI_ADR_SPACE_SYSTEM_IO)
+			return 0;
+
+		pmtmr_ioport = acpi_gbl_FADT.xpm_timer_block.address;
+		/*
+		 * "X" fields are optional extensions to the original V1.0
+		 * fields, so we must selectively expand V1.0 fields if the
+		 * corresponding X field is zero.
+	 	 */
+		if (!pmtmr_ioport)
+			pmtmr_ioport = acpi_gbl_FADT.pm_timer_block;
+	} else {
+		/* FADT rev. 1 */
+		pmtmr_ioport = acpi_gbl_FADT.pm_timer_block;
+	}
+	if (pmtmr_ioport)
+		pr_info("PM-Timer IO Port: %#x\n", pmtmr_ioport);
+#endif
+	return 0;
+}
+
+#ifdef	CONFIG_X86_LOCAL_APIC
+/*
+ * Parse LAPIC entries in MADT
+ * returns 0 on success, < 0 on error
+ */
+
+static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
+{
+	int count;
+
+	if (!boot_cpu_has(X86_FEATURE_APIC))
+		return -ENODEV;
+
+	/*
+	 * Note that the LAPIC address is obtained from the MADT (32-bit value)
+	 * and (optionally) overridden by a LAPIC_ADDR_OVR entry (64-bit value).
+	 */
+
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
+				      acpi_parse_lapic_addr_ovr, 0);
+	if (count < 0) {
+		pr_err("Error parsing LAPIC address override entry\n");
+		return count;
+	}
+
+	register_lapic_address(acpi_lapic_addr);
+
+	return count;
+}
+
+static int __init acpi_parse_madt_lapic_entries(void)
+{
+	int count;
+	int x2count = 0;
+	int ret;
+	struct acpi_subtable_proc madt_proc[2];
+
+	if (!boot_cpu_has(X86_FEATURE_APIC))
+		return -ENODEV;
+
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
+				      acpi_parse_sapic, MAX_LOCAL_APIC);
+
+	if (!count) {
+		memset(madt_proc, 0, sizeof(madt_proc));
+		madt_proc[0].id = ACPI_MADT_TYPE_LOCAL_APIC;
+		madt_proc[0].handler = acpi_parse_lapic;
+		madt_proc[1].id = ACPI_MADT_TYPE_LOCAL_X2APIC;
+		madt_proc[1].handler = acpi_parse_x2apic;
+		ret = acpi_table_parse_entries_array(ACPI_SIG_MADT,
+				sizeof(struct acpi_table_madt),
+				madt_proc, ARRAY_SIZE(madt_proc), MAX_LOCAL_APIC);
+		if (ret < 0) {
+			pr_err("Error parsing LAPIC/X2APIC entries\n");
+			return ret;
+		}
+
+		count = madt_proc[0].count;
+		x2count = madt_proc[1].count;
+	}
+	if (!count && !x2count) {
+		pr_err("No LAPIC entries present\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return -ENODEV;
+	} else if (count < 0 || x2count < 0) {
+		pr_err("Error parsing LAPIC entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+
+	x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC_NMI,
+					acpi_parse_x2apic_nmi, 0);
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI,
+				      acpi_parse_lapic_nmi, 0);
+	if (count < 0 || x2count < 0) {
+		pr_err("Error parsing LAPIC NMI entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_X86_64
+static int __init acpi_parse_mp_wake(union acpi_subtable_headers *header,
+				     const unsigned long end)
+{
+	struct acpi_madt_multiproc_wakeup *mp_wake;
+
+	if (!IS_ENABLED(CONFIG_SMP))
+		return -ENODEV;
+
+	mp_wake = (struct acpi_madt_multiproc_wakeup *)header;
+	if (BAD_MADT_ENTRY(mp_wake, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(&header->common);
+
+	acpi_mp_wake_mailbox_paddr = mp_wake->base_address;
+
+	acpi_wake_cpu_handler_update(acpi_wakeup_cpu);
+
+	return 0;
+}
+#endif				/* CONFIG_X86_64 */
+#endif				/* CONFIG_X86_LOCAL_APIC */
+
+#ifdef	CONFIG_X86_IO_APIC
+static void __init mp_config_acpi_legacy_irqs(void)
+{
+	int i;
+	struct mpc_intsrc mp_irq;
+
+#ifdef CONFIG_EISA
+	/*
+	 * Fabricate the legacy ISA bus (bus #31).
+	 */
+	mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
+#endif
+	set_bit(MP_ISA_BUS, mp_bus_not_pci);
+	pr_debug("Bus #%d is ISA (nIRQs: %d)\n", MP_ISA_BUS, nr_legacy_irqs());
+
+	/*
+	 * Use the default configuration for the IRQs 0-15.  Unless
+	 * overridden by (MADT) interrupt source override entries.
+	 */
+	for (i = 0; i < nr_legacy_irqs(); i++) {
+		int ioapic, pin;
+		unsigned int dstapic;
+		int idx;
+		u32 gsi;
+
+		/* Locate the gsi that irq i maps to. */
+		if (acpi_isa_irq_to_gsi(i, &gsi))
+			continue;
+
+		/*
+		 * Locate the IOAPIC that manages the ISA IRQ.
+		 */
+		ioapic = mp_find_ioapic(gsi);
+		if (ioapic < 0)
+			continue;
+		pin = mp_find_ioapic_pin(ioapic, gsi);
+		dstapic = mpc_ioapic_id(ioapic);
+
+		for (idx = 0; idx < mp_irq_entries; idx++) {
+			struct mpc_intsrc *irq = mp_irqs + idx;
+
+			/* Do we already have a mapping for this ISA IRQ? */
+			if (irq->srcbus == MP_ISA_BUS && irq->srcbusirq == i)
+				break;
+
+			/* Do we already have a mapping for this IOAPIC pin */
+			if (irq->dstapic == dstapic && irq->dstirq == pin)
+				break;
+		}
+
+		if (idx != mp_irq_entries) {
+			pr_debug("ACPI: IRQ%d used by override.\n", i);
+			continue;	/* IRQ already used */
+		}
+
+		mp_irq.type = MP_INTSRC;
+		mp_irq.irqflag = 0;	/* Conforming */
+		mp_irq.srcbus = MP_ISA_BUS;
+		mp_irq.dstapic = dstapic;
+		mp_irq.irqtype = mp_INT;
+		mp_irq.srcbusirq = i; /* Identity mapped */
+		mp_irq.dstirq = pin;
+
+		mp_save_irq(&mp_irq);
+	}
+}
+
+/*
+ * Parse IOAPIC related entries in MADT
+ * returns 0 on success, < 0 on error
+ */
+static int __init acpi_parse_madt_ioapic_entries(void)
+{
+	int count;
+
+	/*
+	 * ACPI interpreter is required to complete interrupt setup,
+	 * so if it is off, don't enumerate the io-apics with ACPI.
+	 * If MPS is present, it will handle them,
+	 * otherwise the system will stay in PIC mode
+	 */
+	if (acpi_disabled || acpi_noirq)
+		return -ENODEV;
+
+	if (!boot_cpu_has(X86_FEATURE_APIC))
+		return -ENODEV;
+
+	/*
+	 * if "noapic" boot option, don't look for IO-APICs
+	 */
+	if (skip_ioapic_setup) {
+		pr_info("Skipping IOAPIC probe due to 'noapic' option.\n");
+		return -ENODEV;
+	}
+
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_IO_APIC, acpi_parse_ioapic,
+				      MAX_IO_APICS);
+	if (!count) {
+		pr_err("No IOAPIC entries present\n");
+		return -ENODEV;
+	} else if (count < 0) {
+		pr_err("Error parsing IOAPIC entry\n");
+		return count;
+	}
+
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE,
+				      acpi_parse_int_src_ovr, nr_irqs);
+	if (count < 0) {
+		pr_err("Error parsing interrupt source overrides entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+
+	/*
+	 * If BIOS did not supply an INT_SRC_OVR for the SCI
+	 * pretend we got one so we can set the SCI flags.
+	 * But ignore setting up SCI on hardware reduced platforms.
+	 */
+	if (acpi_sci_override_gsi == INVALID_ACPI_IRQ && !acpi_gbl_reduced_hardware)
+		acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0,
+				      acpi_gbl_FADT.sci_interrupt);
+
+	/* Fill in identity legacy mappings where no override */
+	mp_config_acpi_legacy_irqs();
+
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE,
+				      acpi_parse_nmi_src, nr_irqs);
+	if (count < 0) {
+		pr_err("Error parsing NMI SRC entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+
+	return 0;
+}
+#else
+static inline int acpi_parse_madt_ioapic_entries(void)
+{
+	return -1;
+}
+#endif	/* !CONFIG_X86_IO_APIC */
+
+static void __init early_acpi_process_madt(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+	int error;
+
+	if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
+
+		/*
+		 * Parse MADT LAPIC entries
+		 */
+		error = early_acpi_parse_madt_lapic_addr_ovr();
+		if (!error) {
+			acpi_lapic = 1;
+			smp_found_config = 1;
+		}
+		if (error == -EINVAL) {
+			/*
+			 * Dell Precision Workstation 410, 610 come here.
+			 */
+			pr_err("Invalid BIOS MADT, disabling ACPI\n");
+			disable_acpi();
+		}
+	}
+#endif
+}
+
+static void __init acpi_process_madt(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+	int error;
+
+	if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
+
+		/*
+		 * Parse MADT LAPIC entries
+		 */
+		error = acpi_parse_madt_lapic_entries();
+		if (!error) {
+			acpi_lapic = 1;
+
+			/*
+			 * Parse MADT IO-APIC entries
+			 */
+			mutex_lock(&acpi_ioapic_lock);
+			error = acpi_parse_madt_ioapic_entries();
+			mutex_unlock(&acpi_ioapic_lock);
+			if (!error) {
+				acpi_set_irq_model_ioapic();
+
+				smp_found_config = 1;
+			}
+
+#ifdef CONFIG_X86_64
+			/*
+			 * Parse MADT MP Wake entry.
+			 */
+			acpi_table_parse_madt(ACPI_MADT_TYPE_MULTIPROC_WAKEUP,
+					      acpi_parse_mp_wake, 1);
+#endif
+		}
+		if (error == -EINVAL) {
+			/*
+			 * Dell Precision Workstation 410, 610 come here.
+			 */
+			pr_err("Invalid BIOS MADT, disabling ACPI\n");
+			disable_acpi();
+		}
+	} else {
+		/*
+ 		 * ACPI found no MADT, and so ACPI wants UP PIC mode.
+ 		 * In the event an MPS table was found, forget it.
+ 		 * Boot with "acpi=off" to use MPS on such a system.
+ 		 */
+		if (smp_found_config) {
+			pr_warn("No APIC-table, disabling MPS\n");
+			smp_found_config = 0;
+		}
+	}
+
+	/*
+	 * ACPI supports both logical (e.g. Hyper-Threading) and physical
+	 * processors, where MPS only supports physical.
+	 */
+	if (acpi_lapic && acpi_ioapic)
+		pr_info("Using ACPI (MADT) for SMP configuration information\n");
+	else if (acpi_lapic)
+		pr_info("Using ACPI for processor (LAPIC) configuration information\n");
+#endif
+	return;
+}
+
+static int __init disable_acpi_irq(const struct dmi_system_id *d)
+{
+	if (!acpi_force) {
+		pr_notice("%s detected: force use of acpi=noirq\n", d->ident);
+		acpi_noirq_set();
+	}
+	return 0;
+}
+
+static int __init disable_acpi_pci(const struct dmi_system_id *d)
+{
+	if (!acpi_force) {
+		pr_notice("%s detected: force use of pci=noacpi\n", d->ident);
+		acpi_disable_pci();
+	}
+	return 0;
+}
+
+static int __init disable_acpi_xsdt(const struct dmi_system_id *d)
+{
+	if (!acpi_force) {
+		pr_notice("%s detected: force use of acpi=rsdt\n", d->ident);
+		acpi_gbl_do_not_use_xsdt = TRUE;
+	} else {
+		pr_notice("Warning: DMI blacklist says broken, but acpi XSDT forced\n");
+	}
+	return 0;
+}
+
+static int __init dmi_disable_acpi(const struct dmi_system_id *d)
+{
+	if (!acpi_force) {
+		pr_notice("%s detected: acpi off\n", d->ident);
+		disable_acpi();
+	} else {
+		pr_notice("Warning: DMI blacklist says broken, but acpi forced\n");
+	}
+	return 0;
+}
+
+/*
+ * Force ignoring BIOS IRQ0 override
+ */
+static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
+{
+	if (!acpi_skip_timer_override) {
+		pr_notice("%s detected: Ignoring BIOS IRQ0 override\n",
+			d->ident);
+		acpi_skip_timer_override = 1;
+	}
+	return 0;
+}
+
+/*
+ * ACPI offers an alternative platform interface model that removes
+ * ACPI hardware requirements for platforms that do not implement
+ * the PC Architecture.
+ *
+ * We initialize the Hardware-reduced ACPI model here:
+ */
+void __init acpi_generic_reduced_hw_init(void)
+{
+	/*
+	 * Override x86_init functions and bypass legacy PIC in
+	 * hardware reduced ACPI mode.
+	 */
+	x86_init.timers.timer_init	= x86_init_noop;
+	x86_init.irqs.pre_vector_init	= x86_init_noop;
+	legacy_pic			= &null_legacy_pic;
+}
+
+static void __init acpi_reduced_hw_init(void)
+{
+	if (acpi_gbl_reduced_hardware)
+		x86_init.acpi.reduced_hw_early_init();
+}
+
+/*
+ * If your system is blacklisted here, but you find that acpi=force
+ * works for you, please contact linux-acpi@vger.kernel.org
+ */
+static const struct dmi_system_id acpi_dmi_table[] __initconst = {
+	/*
+	 * Boxes that need ACPI disabled
+	 */
+	{
+	 .callback = dmi_disable_acpi,
+	 .ident = "IBM Thinkpad",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+		     DMI_MATCH(DMI_BOARD_NAME, "2629H1G"),
+		     },
+	 },
+
+	/*
+	 * Boxes that need ACPI PCI IRQ routing disabled
+	 */
+	{
+	 .callback = disable_acpi_irq,
+	 .ident = "ASUS A7V",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"),
+		     DMI_MATCH(DMI_BOARD_NAME, "<A7V>"),
+		     /* newer BIOS, Revision 1011, does work */
+		     DMI_MATCH(DMI_BIOS_VERSION,
+			       "ASUS A7V ACPI BIOS Revision 1007"),
+		     },
+	 },
+	{
+		/*
+		 * Latest BIOS for IBM 600E (1.16) has bad pcinum
+		 * for LPC bridge, which is needed for the PCI
+		 * interrupt links to work. DSDT fix is in bug 5966.
+		 * 2645, 2646 model numbers are shared with 600/600E/600X
+		 */
+	 .callback = disable_acpi_irq,
+	 .ident = "IBM Thinkpad 600 Series 2645",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+		     DMI_MATCH(DMI_BOARD_NAME, "2645"),
+		     },
+	 },
+	{
+	 .callback = disable_acpi_irq,
+	 .ident = "IBM Thinkpad 600 Series 2646",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+		     DMI_MATCH(DMI_BOARD_NAME, "2646"),
+		     },
+	 },
+	/*
+	 * Boxes that need ACPI PCI IRQ routing and PCI scan disabled
+	 */
+	{			/* _BBN 0 bug */
+	 .callback = disable_acpi_pci,
+	 .ident = "ASUS PR-DLS",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+		     DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"),
+		     DMI_MATCH(DMI_BIOS_VERSION,
+			       "ASUS PR-DLS ACPI BIOS Revision 1010"),
+		     DMI_MATCH(DMI_BIOS_DATE, "03/21/2003")
+		     },
+	 },
+	{
+	 .callback = disable_acpi_pci,
+	 .ident = "Acer TravelMate 36x Laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
+		     },
+	 },
+	/*
+	 * Boxes that need ACPI XSDT use disabled due to corrupted tables
+	 */
+	{
+	 .callback = disable_acpi_xsdt,
+	 .ident = "Advantech DAC-BJ01",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "Bearlake CRB Board"),
+		     DMI_MATCH(DMI_BIOS_VERSION, "V1.12"),
+		     DMI_MATCH(DMI_BIOS_DATE, "02/01/2011"),
+		     },
+	 },
+	{}
+};
+
+/* second table for DMI checks that should run after early-quirks */
+static const struct dmi_system_id acpi_dmi_table_late[] __initconst = {
+	/*
+	 * HP laptops which use a DSDT reporting as HP/SB400/10000,
+	 * which includes some code which overrides all temperature
+	 * trip points to 16C if the INTIN2 input of the I/O APIC
+	 * is enabled.  This input is incorrectly designated the
+	 * ISA IRQ 0 via an interrupt source override even though
+	 * it is wired to the output of the master 8259A and INTIN0
+	 * is not connected at all.  Force ignoring BIOS IRQ0
+	 * override in that cases.
+	 */
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP nx6115 laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6115"),
+		     },
+	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP NX6125 laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6125"),
+		     },
+	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP NX6325 laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
+		     },
+	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "HP 6715b laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
+		     },
+	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "FUJITSU SIEMENS",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+		     },
+	 },
+	{}
+};
+
+/*
+ * acpi_boot_table_init() and acpi_boot_init()
+ *  called from setup_arch(), always.
+ *	1. checksums all tables
+ *	2. enumerates lapics
+ *	3. enumerates io-apics
+ *
+ * acpi_table_init() is separate to allow reading SRAT without
+ * other side effects.
+ *
+ * side effects of acpi_boot_init:
+ *	acpi_lapic = 1 if LAPIC found
+ *	acpi_ioapic = 1 if IOAPIC found
+ *	if (acpi_lapic && acpi_ioapic) smp_found_config = 1;
+ *	if acpi_blacklisted() acpi_disabled = 1;
+ *	acpi_irq_model=...
+ *	...
+ */
+
+void __init acpi_boot_table_init(void)
+{
+	dmi_check_system(acpi_dmi_table);
+
+	/*
+	 * If acpi_disabled, bail out
+	 */
+	if (acpi_disabled)
+		return;
+
+	/*
+	 * Initialize the ACPI boot-time table parser.
+	 */
+	if (acpi_locate_initial_tables())
+		disable_acpi();
+	else
+		acpi_reserve_initial_tables();
+}
+
+int __init early_acpi_boot_init(void)
+{
+	if (acpi_disabled)
+		return 1;
+
+	acpi_table_init_complete();
+
+	acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
+
+	/*
+	 * blacklist may disable ACPI entirely
+	 */
+	if (acpi_blacklisted()) {
+		if (acpi_force) {
+			pr_warn("acpi=force override\n");
+		} else {
+			pr_warn("Disabling ACPI support\n");
+			disable_acpi();
+			return 1;
+		}
+	}
+
+	/*
+	 * Process the Multiple APIC Description Table (MADT), if present
+	 */
+	early_acpi_process_madt();
+
+	/*
+	 * Hardware-reduced ACPI mode initialization:
+	 */
+	acpi_reduced_hw_init();
+
+	return 0;
+}
+
+int __init acpi_boot_init(void)
+{
+	/* those are executed after early-quirks are executed */
+	dmi_check_system(acpi_dmi_table_late);
+
+	/*
+	 * If acpi_disabled, bail out
+	 */
+	if (acpi_disabled)
+		return 1;
+
+	acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
+
+	/*
+	 * set sci_int and PM timer address
+	 */
+	acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt);
+
+	/*
+	 * Process the Multiple APIC Description Table (MADT), if present
+	 */
+	acpi_process_madt();
+
+	acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet);
+	if (IS_ENABLED(CONFIG_ACPI_BGRT) && !acpi_nobgrt)
+		acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt);
+
+	if (!acpi_noirq)
+		x86_init.pci.init = pci_acpi_init;
+
+	/* Do not enable ACPI SPCR console by default */
+	acpi_parse_spcr(earlycon_acpi_spcr_enable, false);
+	return 0;
+}
+
+static int __init parse_acpi(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	/* "acpi=off" disables both ACPI table parsing and interpreter */
+	if (strcmp(arg, "off") == 0) {
+		disable_acpi();
+	}
+	/* acpi=force to over-ride black-list */
+	else if (strcmp(arg, "force") == 0) {
+		acpi_force = 1;
+		acpi_disabled = 0;
+	}
+	/* acpi=strict disables out-of-spec workarounds */
+	else if (strcmp(arg, "strict") == 0) {
+		acpi_strict = 1;
+	}
+	/* acpi=rsdt use RSDT instead of XSDT */
+	else if (strcmp(arg, "rsdt") == 0) {
+		acpi_gbl_do_not_use_xsdt = TRUE;
+	}
+	/* "acpi=noirq" disables ACPI interrupt routing */
+	else if (strcmp(arg, "noirq") == 0) {
+		acpi_noirq_set();
+	}
+	/* "acpi=copy_dsdt" copies DSDT */
+	else if (strcmp(arg, "copy_dsdt") == 0) {
+		acpi_gbl_copy_dsdt_locally = 1;
+	}
+	/* "acpi=nocmcff" disables FF mode for corrected errors */
+	else if (strcmp(arg, "nocmcff") == 0) {
+		acpi_disable_cmcff = 1;
+	} else {
+		/* Core will printk when we return error. */
+		return -EINVAL;
+	}
+	return 0;
+}
+early_param("acpi", parse_acpi);
+
+static int __init parse_acpi_bgrt(char *arg)
+{
+	acpi_nobgrt = true;
+	return 0;
+}
+early_param("bgrt_disable", parse_acpi_bgrt);
+
+/* FIXME: Using pci= for an ACPI parameter is a travesty. */
+static int __init parse_pci(char *arg)
+{
+	if (arg && strcmp(arg, "noacpi") == 0)
+		acpi_disable_pci();
+	return 0;
+}
+early_param("pci", parse_pci);
+
+int __init acpi_mps_check(void)
+{
+#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_X86_MPPARSE)
+/* mptable code is not built-in*/
+	if (acpi_disabled || acpi_noirq) {
+		pr_warn("MPS support code is not built-in, using acpi=off or acpi=noirq or pci=noacpi may have problem\n");
+		return 1;
+	}
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_X86_IO_APIC
+static int __init parse_acpi_skip_timer_override(char *arg)
+{
+	acpi_skip_timer_override = 1;
+	return 0;
+}
+early_param("acpi_skip_timer_override", parse_acpi_skip_timer_override);
+
+static int __init parse_acpi_use_timer_override(char *arg)
+{
+	acpi_use_timer_override = 1;
+	return 0;
+}
+early_param("acpi_use_timer_override", parse_acpi_use_timer_override);
+#endif /* CONFIG_X86_IO_APIC */
+
+static int __init setup_acpi_sci(char *s)
+{
+	if (!s)
+		return -EINVAL;
+	if (!strcmp(s, "edge"))
+		acpi_sci_flags =  ACPI_MADT_TRIGGER_EDGE |
+			(acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK);
+	else if (!strcmp(s, "level"))
+		acpi_sci_flags = ACPI_MADT_TRIGGER_LEVEL |
+			(acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK);
+	else if (!strcmp(s, "high"))
+		acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_HIGH |
+			(acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK);
+	else if (!strcmp(s, "low"))
+		acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_LOW |
+			(acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK);
+	else
+		return -EINVAL;
+	return 0;
+}
+early_param("acpi_sci", setup_acpi_sci);
+
+int __acpi_acquire_global_lock(unsigned int *lock)
+{
+	unsigned int old, new, val;
+	do {
+		old = *lock;
+		new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
+		val = cmpxchg(lock, old, new);
+	} while (unlikely (val != old));
+	return ((new & 0x3) < 3) ? -1 : 0;
+}
+
+int __acpi_release_global_lock(unsigned int *lock)
+{
+	unsigned int old, new, val;
+	do {
+		old = *lock;
+		new = old & ~0x3;
+		val = cmpxchg(lock, old, new);
+	} while (unlikely (val != old));
+	return old & 0x1;
+}
+
+void __init arch_reserve_mem_area(acpi_physical_address addr, size_t size)
+{
+	e820__range_add(addr, size, E820_TYPE_NVS);
+	e820__update_table_print();
+}
+
+void x86_default_set_root_pointer(u64 addr)
+{
+	boot_params.acpi_rsdp_addr = addr;
+}
+
+u64 x86_default_get_root_pointer(void)
+{
+	return boot_params.acpi_rsdp_addr;
+}
diff --git a/arch/x86/kernel/acpi/cppc.c b/arch/x86/kernel/acpi/cppc.c
new file mode 100644
index 000000000..8d8752b44
--- /dev/null
+++ b/arch/x86/kernel/acpi/cppc.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * cppc.c: CPPC Interface for x86
+ * Copyright (c) 2016, Intel Corporation.
+ */
+
+#include <acpi/cppc_acpi.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/topology.h>
+
+/* Refer to drivers/acpi/cppc_acpi.c for the description of functions */
+
+bool cpc_supported_by_cpu(void)
+{
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_AMD:
+	case X86_VENDOR_HYGON:
+		if (boot_cpu_data.x86 == 0x19 && ((boot_cpu_data.x86_model <= 0x0f) ||
+		    (boot_cpu_data.x86_model >= 0x20 && boot_cpu_data.x86_model <= 0x2f)))
+			return true;
+		else if (boot_cpu_data.x86 == 0x17 &&
+			 boot_cpu_data.x86_model >= 0x70 && boot_cpu_data.x86_model <= 0x7f)
+			return true;
+		return boot_cpu_has(X86_FEATURE_CPPC);
+	}
+	return false;
+}
+
+bool cpc_ffh_supported(void)
+{
+	return true;
+}
+
+int cpc_read_ffh(int cpunum, struct cpc_reg *reg, u64 *val)
+{
+	int err;
+
+	err = rdmsrl_safe_on_cpu(cpunum, reg->address, val);
+	if (!err) {
+		u64 mask = GENMASK_ULL(reg->bit_offset + reg->bit_width - 1,
+				       reg->bit_offset);
+
+		*val &= mask;
+		*val >>= reg->bit_offset;
+	}
+	return err;
+}
+
+int cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val)
+{
+	u64 rd_val;
+	int err;
+
+	err = rdmsrl_safe_on_cpu(cpunum, reg->address, &rd_val);
+	if (!err) {
+		u64 mask = GENMASK_ULL(reg->bit_offset + reg->bit_width - 1,
+				       reg->bit_offset);
+
+		val <<= reg->bit_offset;
+		val &= mask;
+		rd_val &= ~mask;
+		rd_val |= val;
+		err = wrmsrl_safe_on_cpu(cpunum, reg->address, rd_val);
+	}
+	return err;
+}
+
+static void amd_set_max_freq_ratio(void)
+{
+	struct cppc_perf_caps perf_caps;
+	u64 highest_perf, nominal_perf;
+	u64 perf_ratio;
+	int rc;
+
+	rc = cppc_get_perf_caps(0, &perf_caps);
+	if (rc) {
+		pr_debug("Could not retrieve perf counters (%d)\n", rc);
+		return;
+	}
+
+	highest_perf = amd_get_highest_perf();
+	nominal_perf = perf_caps.nominal_perf;
+
+	if (!highest_perf || !nominal_perf) {
+		pr_debug("Could not retrieve highest or nominal performance\n");
+		return;
+	}
+
+	perf_ratio = div_u64(highest_perf * SCHED_CAPACITY_SCALE, nominal_perf);
+	/* midpoint between max_boost and max_P */
+	perf_ratio = (perf_ratio + SCHED_CAPACITY_SCALE) >> 1;
+	if (!perf_ratio) {
+		pr_debug("Non-zero highest/nominal perf values led to a 0 ratio\n");
+		return;
+	}
+
+	freq_invariance_set_perf_ratio(perf_ratio, false);
+}
+
+static DEFINE_MUTEX(freq_invariance_lock);
+
+void init_freq_invariance_cppc(void)
+{
+	static bool init_done;
+
+	if (!cpu_feature_enabled(X86_FEATURE_APERFMPERF))
+		return;
+
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
+		return;
+
+	mutex_lock(&freq_invariance_lock);
+	if (!init_done)
+		amd_set_max_freq_ratio();
+	init_done = true;
+	mutex_unlock(&freq_invariance_lock);
+}
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
new file mode 100644
index 000000000..7945eae5b
--- /dev/null
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2005 Intel Corporation
+ * 	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ * 	- Added _PDC for SMP C-states on Intel CPUs
+ */
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/cpu.h>
+#include <linux/sched.h>
+
+#include <acpi/processor.h>
+#include <asm/mwait.h>
+#include <asm/special_insns.h>
+
+/*
+ * Initialize bm_flags based on the CPU cache properties
+ * On SMP it depends on cache configuration
+ * - When cache is not shared among all CPUs, we flush cache
+ *   before entering C3.
+ * - When cache is shared among all CPUs, we use bm_check
+ *   mechanism as in UP case
+ *
+ * This routine is called only after all the CPUs are online
+ */
+void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
+					unsigned int cpu)
+{
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+	flags->bm_check = 0;
+	if (num_online_cpus() == 1)
+		flags->bm_check = 1;
+	else if (c->x86_vendor == X86_VENDOR_INTEL) {
+		/*
+		 * Today all MP CPUs that support C3 share cache.
+		 * And caches should not be flushed by software while
+		 * entering C3 type state.
+		 */
+		flags->bm_check = 1;
+	}
+
+	/*
+	 * On all recent Intel platforms, ARB_DISABLE is a nop.
+	 * So, set bm_control to zero to indicate that ARB_DISABLE
+	 * is not required while entering C3 type state on
+	 * P4, Core and beyond CPUs
+	 */
+	if (c->x86_vendor == X86_VENDOR_INTEL &&
+	    (c->x86 > 0xf || (c->x86 == 6 && c->x86_model >= 0x0f)))
+			flags->bm_control = 0;
+	/*
+	 * For all recent Centaur CPUs, the ucode will make sure that each
+	 * core can keep cache coherence with each other while entering C3
+	 * type state. So, set bm_check to 1 to indicate that the kernel
+	 * doesn't need to execute a cache flush operation (WBINVD) when
+	 * entering C3 type state.
+	 */
+	if (c->x86_vendor == X86_VENDOR_CENTAUR) {
+		if (c->x86 > 6 || (c->x86 == 6 && c->x86_model == 0x0f &&
+		    c->x86_stepping >= 0x0e))
+			flags->bm_check = 1;
+	}
+
+	if (c->x86_vendor == X86_VENDOR_ZHAOXIN) {
+		/*
+		 * All Zhaoxin CPUs that support C3 share cache.
+		 * And caches should not be flushed by software while
+		 * entering C3 type state.
+		 */
+		flags->bm_check = 1;
+		/*
+		 * On all recent Zhaoxin platforms, ARB_DISABLE is a nop.
+		 * So, set bm_control to zero to indicate that ARB_DISABLE
+		 * is not required while entering C3 type state.
+		 */
+		flags->bm_control = 0;
+	}
+	if (c->x86_vendor == X86_VENDOR_AMD && c->x86 >= 0x17) {
+		/*
+		 * For all AMD Zen or newer CPUs that support C3, caches
+		 * should not be flushed by software while entering C3
+		 * type state. Set bm->check to 1 so that kernel doesn't
+		 * need to execute cache flush operation.
+		 */
+		flags->bm_check = 1;
+		/*
+		 * In current AMD C state implementation ARB_DIS is no longer
+		 * used. So set bm_control to zero to indicate ARB_DIS is not
+		 * required while entering C3 type state.
+		 */
+		flags->bm_control = 0;
+	}
+}
+EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
+
+/* The code below handles cstate entry with monitor-mwait pair on Intel*/
+
+struct cstate_entry {
+	struct {
+		unsigned int eax;
+		unsigned int ecx;
+	} states[ACPI_PROCESSOR_MAX_POWER];
+};
+static struct cstate_entry __percpu *cpu_cstate_entry;	/* per CPU ptr */
+
+static short mwait_supported[ACPI_PROCESSOR_MAX_POWER];
+
+#define NATIVE_CSTATE_BEYOND_HALT	(2)
+
+static long acpi_processor_ffh_cstate_probe_cpu(void *_cx)
+{
+	struct acpi_processor_cx *cx = _cx;
+	long retval;
+	unsigned int eax, ebx, ecx, edx;
+	unsigned int edx_part;
+	unsigned int cstate_type; /* C-state type and not ACPI C-state type */
+	unsigned int num_cstate_subtype;
+
+	cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx);
+
+	/* Check whether this particular cx_type (in CST) is supported or not */
+	cstate_type = ((cx->address >> MWAIT_SUBSTATE_SIZE) &
+			MWAIT_CSTATE_MASK) + 1;
+	edx_part = edx >> (cstate_type * MWAIT_SUBSTATE_SIZE);
+	num_cstate_subtype = edx_part & MWAIT_SUBSTATE_MASK;
+
+	retval = 0;
+	/* If the HW does not support any sub-states in this C-state */
+	if (num_cstate_subtype == 0) {
+		pr_warn(FW_BUG "ACPI MWAIT C-state 0x%x not supported by HW (0x%x)\n",
+				cx->address, edx_part);
+		retval = -1;
+		goto out;
+	}
+
+	/* mwait ecx extensions INTERRUPT_BREAK should be supported for C2/C3 */
+	if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) ||
+	    !(ecx & CPUID5_ECX_INTERRUPT_BREAK)) {
+		retval = -1;
+		goto out;
+	}
+
+	if (!mwait_supported[cstate_type]) {
+		mwait_supported[cstate_type] = 1;
+		printk(KERN_DEBUG
+			"Monitor-Mwait will be used to enter C-%d state\n",
+			cx->type);
+	}
+	snprintf(cx->desc,
+			ACPI_CX_DESC_LEN, "ACPI FFH MWAIT 0x%x",
+			cx->address);
+out:
+	return retval;
+}
+
+int acpi_processor_ffh_cstate_probe(unsigned int cpu,
+		struct acpi_processor_cx *cx, struct acpi_power_register *reg)
+{
+	struct cstate_entry *percpu_entry;
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+	long retval;
+
+	if (!cpu_cstate_entry || c->cpuid_level < CPUID_MWAIT_LEAF)
+		return -1;
+
+	if (reg->bit_offset != NATIVE_CSTATE_BEYOND_HALT)
+		return -1;
+
+	percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu);
+	percpu_entry->states[cx->index].eax = 0;
+	percpu_entry->states[cx->index].ecx = 0;
+
+	/* Make sure we are running on right CPU */
+
+	retval = call_on_cpu(cpu, acpi_processor_ffh_cstate_probe_cpu, cx,
+			     false);
+	if (retval == 0) {
+		/* Use the hint in CST */
+		percpu_entry->states[cx->index].eax = cx->address;
+		percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK;
+	}
+
+	/*
+	 * For _CST FFH on Intel, if GAS.access_size bit 1 is cleared,
+	 * then we should skip checking BM_STS for this C-state.
+	 * ref: "Intel Processor Vendor-Specific ACPI Interface Specification"
+	 */
+	if ((c->x86_vendor == X86_VENDOR_INTEL) && !(reg->access_size & 0x2))
+		cx->bm_sts_skip = 1;
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe);
+
+void __cpuidle acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx)
+{
+	unsigned int cpu = smp_processor_id();
+	struct cstate_entry *percpu_entry;
+
+	percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu);
+	mwait_idle_with_hints(percpu_entry->states[cx->index].eax,
+	                      percpu_entry->states[cx->index].ecx);
+}
+EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_enter);
+
+static int __init ffh_cstate_init(void)
+{
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+
+	if (c->x86_vendor != X86_VENDOR_INTEL &&
+	    c->x86_vendor != X86_VENDOR_AMD &&
+	    c->x86_vendor != X86_VENDOR_HYGON)
+		return -1;
+
+	cpu_cstate_entry = alloc_percpu(struct cstate_entry);
+	return 0;
+}
+
+static void __exit ffh_cstate_exit(void)
+{
+	free_percpu(cpu_cstate_entry);
+	cpu_cstate_entry = NULL;
+}
+
+arch_initcall(ffh_cstate_init);
+__exitcall(ffh_cstate_exit);
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
new file mode 100644
index 000000000..3b7f4cdbf
--- /dev/null
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * sleep.c - x86-specific ACPI sleep support.
+ *
+ *  Copyright (C) 2001-2003 Patrick Mochel
+ *  Copyright (C) 2001-2003 Pavel Machek <pavel@ucw.cz>
+ */
+
+#include <linux/acpi.h>
+#include <linux/memblock.h>
+#include <linux/dmi.h>
+#include <linux/cpumask.h>
+#include <linux/pgtable.h>
+#include <asm/segment.h>
+#include <asm/desc.h>
+#include <asm/cacheflush.h>
+#include <asm/realmode.h>
+#include <asm/hypervisor.h>
+
+#include <linux/ftrace.h>
+#include "../../realmode/rm/wakeup.h"
+#include "sleep.h"
+
+unsigned long acpi_realmode_flags;
+
+#if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
+static char temp_stack[4096];
+#endif
+
+/**
+ * acpi_get_wakeup_address - provide physical address for S3 wakeup
+ *
+ * Returns the physical address where the kernel should be resumed after the
+ * system awakes from S3, e.g. for programming into the firmware waking vector.
+ */
+unsigned long acpi_get_wakeup_address(void)
+{
+	return ((unsigned long)(real_mode_header->wakeup_start));
+}
+
+/**
+ * x86_acpi_enter_sleep_state - enter sleep state
+ * @state: Sleep state to enter.
+ *
+ * Wrapper around acpi_enter_sleep_state() to be called by assembly.
+ */
+asmlinkage acpi_status __visible x86_acpi_enter_sleep_state(u8 state)
+{
+	return acpi_enter_sleep_state(state);
+}
+
+/**
+ * x86_acpi_suspend_lowlevel - save kernel state
+ *
+ * Create an identity mapped page table and copy the wakeup routine to
+ * low memory.
+ */
+int x86_acpi_suspend_lowlevel(void)
+{
+	struct wakeup_header *header =
+		(struct wakeup_header *) __va(real_mode_header->wakeup_header);
+
+	if (header->signature != WAKEUP_HEADER_SIGNATURE) {
+		printk(KERN_ERR "wakeup header does not match\n");
+		return -EINVAL;
+	}
+
+	header->video_mode = saved_video_mode;
+
+	header->pmode_behavior = 0;
+
+#ifndef CONFIG_64BIT
+	native_store_gdt((struct desc_ptr *)&header->pmode_gdt);
+
+	/*
+	 * We have to check that we can write back the value, and not
+	 * just read it.  At least on 90 nm Pentium M (Family 6, Model
+	 * 13), reading an invalid MSR is not guaranteed to trap, see
+	 * Erratum X4 in "Intel Pentium M Processor on 90 nm Process
+	 * with 2-MB L2 Cache and Intel® Processor A100 and A110 on 90
+	 * nm process with 512-KB L2 Cache Specification Update".
+	 */
+	if (!rdmsr_safe(MSR_EFER,
+			&header->pmode_efer_low,
+			&header->pmode_efer_high) &&
+	    !wrmsr_safe(MSR_EFER,
+			header->pmode_efer_low,
+			header->pmode_efer_high))
+		header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_EFER);
+#endif /* !CONFIG_64BIT */
+
+	header->pmode_cr0 = read_cr0();
+	if (__this_cpu_read(cpu_info.cpuid_level) >= 0) {
+		header->pmode_cr4 = __read_cr4();
+		header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_CR4);
+	}
+	if (!rdmsr_safe(MSR_IA32_MISC_ENABLE,
+			&header->pmode_misc_en_low,
+			&header->pmode_misc_en_high) &&
+	    !wrmsr_safe(MSR_IA32_MISC_ENABLE,
+			header->pmode_misc_en_low,
+			header->pmode_misc_en_high))
+		header->pmode_behavior |=
+			(1 << WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE);
+	header->realmode_flags = acpi_realmode_flags;
+	header->real_magic = 0x12345678;
+
+#ifndef CONFIG_64BIT
+	header->pmode_entry = (u32)&wakeup_pmode_return;
+	header->pmode_cr3 = (u32)__pa_symbol(initial_page_table);
+	saved_magic = 0x12345678;
+#else /* CONFIG_64BIT */
+#ifdef CONFIG_SMP
+	initial_stack = (unsigned long)temp_stack + sizeof(temp_stack);
+	early_gdt_descr.address =
+			(unsigned long)get_cpu_gdt_rw(smp_processor_id());
+	initial_gs = per_cpu_offset(smp_processor_id());
+#endif
+	initial_code = (unsigned long)wakeup_long64;
+       saved_magic = 0x123456789abcdef0L;
+#endif /* CONFIG_64BIT */
+
+	/*
+	 * Pause/unpause graph tracing around do_suspend_lowlevel as it has
+	 * inconsistent call/return info after it jumps to the wakeup vector.
+	 */
+	pause_graph_tracing();
+	do_suspend_lowlevel();
+	unpause_graph_tracing();
+	return 0;
+}
+
+static int __init acpi_sleep_setup(char *str)
+{
+	while ((str != NULL) && (*str != '\0')) {
+		if (strncmp(str, "s3_bios", 7) == 0)
+			acpi_realmode_flags |= 1;
+		if (strncmp(str, "s3_mode", 7) == 0)
+			acpi_realmode_flags |= 2;
+		if (strncmp(str, "s3_beep", 7) == 0)
+			acpi_realmode_flags |= 4;
+#ifdef CONFIG_HIBERNATION
+		if (strncmp(str, "s4_hwsig", 8) == 0)
+			acpi_check_s4_hw_signature = 1;
+		if (strncmp(str, "s4_nohwsig", 10) == 0)
+			acpi_check_s4_hw_signature = 0;
+#endif
+		if (strncmp(str, "nonvs", 5) == 0)
+			acpi_nvs_nosave();
+		if (strncmp(str, "nonvs_s3", 8) == 0)
+			acpi_nvs_nosave_s3();
+		if (strncmp(str, "old_ordering", 12) == 0)
+			acpi_old_suspend_ordering();
+		if (strncmp(str, "nobl", 4) == 0)
+			acpi_sleep_no_blacklist();
+		str = strchr(str, ',');
+		if (str != NULL)
+			str += strspn(str, ", \t");
+	}
+	return 1;
+}
+
+__setup("acpi_sleep=", acpi_sleep_setup);
+
+#if defined(CONFIG_HIBERNATION) && defined(CONFIG_HYPERVISOR_GUEST)
+static int __init init_s4_sigcheck(void)
+{
+	/*
+	 * If running on a hypervisor, honour the ACPI specification
+	 * by default and trigger a clean reboot when the hardware
+	 * signature in FACS is changed after hibernation.
+	 */
+	if (acpi_check_s4_hw_signature == -1 &&
+	    !hypervisor_is_type(X86_HYPER_NATIVE))
+		acpi_check_s4_hw_signature = 1;
+
+	return 0;
+}
+/* This must happen before acpi_init() which is a subsys initcall */
+arch_initcall(init_s4_sigcheck);
+#endif
diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h
new file mode 100644
index 000000000..171a40c74
--- /dev/null
+++ b/arch/x86/kernel/acpi/sleep.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *	Variables and functions used by the code in sleep.c
+ */
+
+#include <linux/linkage.h>
+
+extern unsigned long saved_video_mode;
+extern long saved_magic;
+
+extern int wakeup_pmode_return;
+
+extern u8 wake_sleep_flags;
+
+extern unsigned long acpi_copy_wakeup_routine(unsigned long);
+extern void wakeup_long64(void);
+
+extern void do_suspend_lowlevel(void);
+
+extern int x86_acpi_suspend_lowlevel(void);
+
+asmlinkage acpi_status x86_acpi_enter_sleep_state(u8 state);
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
new file mode 100644
index 000000000..cf6908107
--- /dev/null
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -0,0 +1,101 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+	.text
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page_types.h>
+
+# Copyright 2003, 2008 Pavel Machek <pavel@suse.cz
+
+	.code32
+	ALIGN
+
+SYM_CODE_START(wakeup_pmode_return)
+	movw	$__KERNEL_DS, %ax
+	movw	%ax, %ss
+	movw	%ax, %fs
+	movw	%ax, %gs
+
+	movw	$__USER_DS, %ax
+	movw	%ax, %ds
+	movw	%ax, %es
+
+	# reload the gdt, as we need the full 32 bit address
+	lidt	saved_idt
+	lldt	saved_ldt
+	ljmp	$(__KERNEL_CS), $1f
+1:
+	movl	%cr3, %eax
+	movl	%eax, %cr3
+	wbinvd
+
+	# and restore the stack ... but you need gdt for this to work
+	movl	saved_context_esp, %esp
+
+	movl	%cs:saved_magic, %eax
+	cmpl	$0x12345678, %eax
+	jne	bogus_magic
+
+	# jump to place where we left off
+	movl	saved_eip, %eax
+	jmp	*%eax
+SYM_CODE_END(wakeup_pmode_return)
+
+bogus_magic:
+	jmp	bogus_magic
+
+
+
+save_registers:
+	sidt	saved_idt
+	sldt	saved_ldt
+	str	saved_tss
+
+	leal	4(%esp), %eax
+	movl	%eax, saved_context_esp
+	movl	%ebx, saved_context_ebx
+	movl	%ebp, saved_context_ebp
+	movl	%esi, saved_context_esi
+	movl	%edi, saved_context_edi
+	pushfl
+	popl	saved_context_eflags
+
+	movl	$ret_point, saved_eip
+	RET
+
+
+restore_registers:
+	movl	saved_context_ebp, %ebp
+	movl	saved_context_ebx, %ebx
+	movl	saved_context_esi, %esi
+	movl	saved_context_edi, %edi
+	pushl	saved_context_eflags
+	popfl
+	RET
+
+SYM_CODE_START(do_suspend_lowlevel)
+	call	save_processor_state
+	call	save_registers
+	pushl	$3
+	call	x86_acpi_enter_sleep_state
+	addl	$4, %esp
+
+#	In case of S3 failure, we'll emerge here.  Jump
+# 	to ret_point to recover
+	jmp	ret_point
+	.p2align 4,,7
+ret_point:
+	call	restore_registers
+	call	restore_processor_state
+	RET
+SYM_CODE_END(do_suspend_lowlevel)
+
+.data
+ALIGN
+SYM_DATA(saved_magic,	.long 0)
+saved_eip:		.long 0
+
+# saved registers
+saved_idt:	.long	0,0
+saved_ldt:	.long	0
+saved_tss:	.long	0
+
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
new file mode 100644
index 000000000..d5d8a352e
--- /dev/null
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+.text
+#include <linux/linkage.h>
+#include <linux/objtool.h>
+#include <asm/segment.h>
+#include <asm/pgtable_types.h>
+#include <asm/page_types.h>
+#include <asm/msr.h>
+#include <asm/asm-offsets.h>
+#include <asm/frame.h>
+#include <asm/nospec-branch.h>
+
+# Copyright 2003 Pavel Machek <pavel@suse.cz
+
+.code64
+	/*
+	 * Hooray, we are in Long 64-bit mode (but still running in low memory)
+	 */
+SYM_FUNC_START(wakeup_long64)
+	movq	saved_magic, %rax
+	movq	$0x123456789abcdef0, %rdx
+	cmpq	%rdx, %rax
+	je	2f
+
+	/* stop here on a saved_magic mismatch */
+	movq $0xbad6d61676963, %rcx
+1:
+	jmp 1b
+2:
+	movw	$__KERNEL_DS, %ax
+	movw	%ax, %ss	
+	movw	%ax, %ds
+	movw	%ax, %es
+	movw	%ax, %fs
+	movw	%ax, %gs
+	movq	saved_rsp, %rsp
+
+	movq	saved_rbx, %rbx
+	movq	saved_rdi, %rdi
+	movq	saved_rsi, %rsi
+	movq	saved_rbp, %rbp
+
+	movq	saved_rip, %rax
+	ANNOTATE_RETPOLINE_SAFE
+	jmp	*%rax
+SYM_FUNC_END(wakeup_long64)
+
+SYM_FUNC_START(do_suspend_lowlevel)
+	FRAME_BEGIN
+	subq	$8, %rsp
+	xorl	%eax, %eax
+	call	save_processor_state
+
+	movq	$saved_context, %rax
+	movq	%rsp, pt_regs_sp(%rax)
+	movq	%rbp, pt_regs_bp(%rax)
+	movq	%rsi, pt_regs_si(%rax)
+	movq	%rdi, pt_regs_di(%rax)
+	movq	%rbx, pt_regs_bx(%rax)
+	movq	%rcx, pt_regs_cx(%rax)
+	movq	%rdx, pt_regs_dx(%rax)
+	movq	%r8, pt_regs_r8(%rax)
+	movq	%r9, pt_regs_r9(%rax)
+	movq	%r10, pt_regs_r10(%rax)
+	movq	%r11, pt_regs_r11(%rax)
+	movq	%r12, pt_regs_r12(%rax)
+	movq	%r13, pt_regs_r13(%rax)
+	movq	%r14, pt_regs_r14(%rax)
+	movq	%r15, pt_regs_r15(%rax)
+	pushfq
+	popq	pt_regs_flags(%rax)
+
+	movq	$.Lresume_point, saved_rip(%rip)
+
+	movq	%rsp, saved_rsp
+	movq	%rbp, saved_rbp
+	movq	%rbx, saved_rbx
+	movq	%rdi, saved_rdi
+	movq	%rsi, saved_rsi
+
+	addq	$8, %rsp
+	movl	$3, %edi
+	xorl	%eax, %eax
+	call	x86_acpi_enter_sleep_state
+	/* in case something went wrong, restore the machine status and go on */
+	jmp	.Lresume_point
+
+	.align 4
+.Lresume_point:
+	/* We don't restore %rax, it must be 0 anyway */
+	movq	$saved_context, %rax
+	movq	saved_context_cr4(%rax), %rbx
+	movq	%rbx, %cr4
+	movq	saved_context_cr3(%rax), %rbx
+	movq	%rbx, %cr3
+	movq	saved_context_cr2(%rax), %rbx
+	movq	%rbx, %cr2
+	movq	saved_context_cr0(%rax), %rbx
+	movq	%rbx, %cr0
+	pushq	pt_regs_flags(%rax)
+	popfq
+	movq	pt_regs_sp(%rax), %rsp
+	movq	pt_regs_bp(%rax), %rbp
+	movq	pt_regs_si(%rax), %rsi
+	movq	pt_regs_di(%rax), %rdi
+	movq	pt_regs_bx(%rax), %rbx
+	movq	pt_regs_cx(%rax), %rcx
+	movq	pt_regs_dx(%rax), %rdx
+	movq	pt_regs_r8(%rax), %r8
+	movq	pt_regs_r9(%rax), %r9
+	movq	pt_regs_r10(%rax), %r10
+	movq	pt_regs_r11(%rax), %r11
+	movq	pt_regs_r12(%rax), %r12
+	movq	pt_regs_r13(%rax), %r13
+	movq	pt_regs_r14(%rax), %r14
+	movq	pt_regs_r15(%rax), %r15
+
+#if defined(CONFIG_KASAN) && defined(CONFIG_KASAN_STACK)
+	/*
+	 * The suspend path may have poisoned some areas deeper in the stack,
+	 * which we now need to unpoison.
+	 */
+	movq	%rsp, %rdi
+	call	kasan_unpoison_task_stack_below
+#endif
+
+	xorl	%eax, %eax
+	addq	$8, %rsp
+	FRAME_END
+	jmp	restore_processor_state
+SYM_FUNC_END(do_suspend_lowlevel)
+STACK_FRAME_NON_STANDARD do_suspend_lowlevel
+
+.data
+saved_rbp:		.quad	0
+saved_rsi:		.quad	0
+saved_rdi:		.quad	0
+saved_rbx:		.quad	0
+
+saved_rip:		.quad	0
+saved_rsp:		.quad	0
+
+SYM_DATA(saved_magic,	.quad	0)