Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

11 files changed, 2489 insertions, 0 deletions

diff --git a/drivers/acpi/pmic/Kconfig b/drivers/acpi/pmic/Kconfig
new file mode 100644
index 000000000..f84b8f603
--- /dev/null
+++ b/drivers/acpi/pmic/Kconfig
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menuconfig PMIC_OPREGION
+	bool "PMIC (Power Management Integrated Circuit) operation region support"
+	help
+	  Select this option to enable support for ACPI operation
+	  region of the PMIC chip. The operation region can be used
+	  to control power rails and sensor reading/writing on the
+	  PMIC chip.
+
+if PMIC_OPREGION
+
+config BYTCRC_PMIC_OPREGION
+	bool "ACPI operation region support for Bay Trail Crystal Cove PMIC"
+	depends on INTEL_SOC_PMIC
+	help
+	  This config adds ACPI operation region support for the Bay Trail
+	  version of the Crystal Cove PMIC.
+
+config CHTCRC_PMIC_OPREGION
+	bool "ACPI operation region support for Cherry Trail Crystal Cove PMIC"
+	depends on INTEL_SOC_PMIC
+	help
+	  This config adds ACPI operation region support for the Cherry Trail
+	  version of the Crystal Cove PMIC.
+
+config XPOWER_PMIC_OPREGION
+	bool "ACPI operation region support for XPower AXP288 PMIC"
+	depends on MFD_AXP20X_I2C && IOSF_MBI=y
+	help
+	  This config adds ACPI operation region support for XPower AXP288 PMIC.
+
+config BXT_WC_PMIC_OPREGION
+	bool "ACPI operation region support for BXT WhiskeyCove PMIC"
+	depends on INTEL_SOC_PMIC_BXTWC
+	help
+	  This config adds ACPI operation region support for BXT WhiskeyCove PMIC.
+
+config CHT_WC_PMIC_OPREGION
+	bool "ACPI operation region support for CHT Whiskey Cove PMIC"
+	depends on INTEL_SOC_PMIC_CHTWC
+	help
+	  This config adds ACPI operation region support for CHT Whiskey Cove PMIC.
+
+config CHT_DC_TI_PMIC_OPREGION
+	bool "ACPI operation region support for Dollar Cove TI PMIC"
+	depends on INTEL_SOC_PMIC_CHTDC_TI
+	help
+	  This config adds ACPI operation region support for Dollar Cove TI PMIC.
+
+endif	# PMIC_OPREGION
+
+config TPS68470_PMIC_OPREGION
+	bool "ACPI operation region support for TPS68470 PMIC"
+	depends on INTEL_SKL_INT3472
+	help
+	  This config adds ACPI operation region support for TI TPS68470 PMIC.
+	  TPS68470 device is an advanced power management unit that powers
+	  a Compact Camera Module (CCM), generates clocks for image sensors,
+	  drives a dual LED for flash and incorporates two LED drivers for
+	  general purpose indicators.
+	  This driver enables ACPI operation region support control voltage
+	  regulators and clocks.
+
+	  This option is a bool as it provides an ACPI operation
+	  region, which must be available before any of the devices
+	  using this, are probed.
diff --git a/drivers/acpi/pmic/Makefile b/drivers/acpi/pmic/Makefile
new file mode 100644
index 000000000..cd072c649
--- /dev/null
+++ b/drivers/acpi/pmic/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_PMIC_OPREGION)		+= intel_pmic.o
+obj-$(CONFIG_BYTCRC_PMIC_OPREGION)	+= intel_pmic_bytcrc.o
+obj-$(CONFIG_CHTCRC_PMIC_OPREGION)	+= intel_pmic_chtcrc.o
+obj-$(CONFIG_XPOWER_PMIC_OPREGION)	+= intel_pmic_xpower.o
+obj-$(CONFIG_BXT_WC_PMIC_OPREGION)	+= intel_pmic_bxtwc.o
+obj-$(CONFIG_CHT_WC_PMIC_OPREGION)	+= intel_pmic_chtwc.o
+obj-$(CONFIG_CHT_DC_TI_PMIC_OPREGION)	+= intel_pmic_chtdc_ti.o
+obj-$(CONFIG_TPS68470_PMIC_OPREGION)	+= tps68470_pmic.o
diff --git a/drivers/acpi/pmic/intel_pmic.c b/drivers/acpi/pmic/intel_pmic.c
new file mode 100644
index 000000000..f20dbda1a
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic.c
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * intel_pmic.c - Intel PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/export.h>
+#include <linux/acpi.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/regmap.h>
+#include <acpi/acpi_lpat.h>
+#include "intel_pmic.h"
+
+#define PMIC_POWER_OPREGION_ID		0x8d
+#define PMIC_THERMAL_OPREGION_ID	0x8c
+#define PMIC_REGS_OPREGION_ID		0x8f
+
+struct intel_pmic_regs_handler_ctx {
+	unsigned int val;
+	u16 addr;
+};
+
+struct intel_pmic_opregion {
+	struct mutex lock;
+	struct acpi_lpat_conversion_table *lpat_table;
+	struct regmap *regmap;
+	const struct intel_pmic_opregion_data *data;
+	struct intel_pmic_regs_handler_ctx ctx;
+};
+
+static struct intel_pmic_opregion *intel_pmic_opregion;
+
+static int pmic_get_reg_bit(int address, struct pmic_table *table,
+			    int count, int *reg, int *bit)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		if (table[i].address == address) {
+			*reg = table[i].reg;
+			if (bit)
+				*bit = table[i].bit;
+			return 0;
+		}
+	}
+	return -ENOENT;
+}
+
+static acpi_status intel_pmic_power_handler(u32 function,
+		acpi_physical_address address, u32 bits, u64 *value64,
+		void *handler_context, void *region_context)
+{
+	struct intel_pmic_opregion *opregion = region_context;
+	struct regmap *regmap = opregion->regmap;
+	const struct intel_pmic_opregion_data *d = opregion->data;
+	int reg, bit, result;
+
+	if (bits != 32 || !value64)
+		return AE_BAD_PARAMETER;
+
+	if (function == ACPI_WRITE && !(*value64 == 0 || *value64 == 1))
+		return AE_BAD_PARAMETER;
+
+	result = pmic_get_reg_bit(address, d->power_table,
+				  d->power_table_count, &reg, &bit);
+	if (result == -ENOENT)
+		return AE_BAD_PARAMETER;
+
+	mutex_lock(&opregion->lock);
+
+	result = function == ACPI_READ ?
+		d->get_power(regmap, reg, bit, value64) :
+		d->update_power(regmap, reg, bit, *value64 == 1);
+
+	mutex_unlock(&opregion->lock);
+
+	return result ? AE_ERROR : AE_OK;
+}
+
+static int pmic_read_temp(struct intel_pmic_opregion *opregion,
+			  int reg, u64 *value)
+{
+	int raw_temp, temp;
+
+	if (!opregion->data->get_raw_temp)
+		return -ENXIO;
+
+	raw_temp = opregion->data->get_raw_temp(opregion->regmap, reg);
+	if (raw_temp < 0)
+		return raw_temp;
+
+	if (!opregion->lpat_table) {
+		*value = raw_temp;
+		return 0;
+	}
+
+	temp = opregion->data->lpat_raw_to_temp(opregion->lpat_table, raw_temp);
+	if (temp < 0)
+		return temp;
+
+	*value = temp;
+	return 0;
+}
+
+static int pmic_thermal_temp(struct intel_pmic_opregion *opregion, int reg,
+			     u32 function, u64 *value)
+{
+	return function == ACPI_READ ?
+		pmic_read_temp(opregion, reg, value) : -EINVAL;
+}
+
+static int pmic_thermal_aux(struct intel_pmic_opregion *opregion, int reg,
+			    u32 function, u64 *value)
+{
+	int raw_temp;
+
+	if (function == ACPI_READ)
+		return pmic_read_temp(opregion, reg, value);
+
+	if (!opregion->data->update_aux)
+		return -ENXIO;
+
+	if (opregion->lpat_table) {
+		raw_temp = acpi_lpat_temp_to_raw(opregion->lpat_table, *value);
+		if (raw_temp < 0)
+			return raw_temp;
+	} else {
+		raw_temp = *value;
+	}
+
+	return opregion->data->update_aux(opregion->regmap, reg, raw_temp);
+}
+
+static int pmic_thermal_pen(struct intel_pmic_opregion *opregion, int reg,
+			    int bit, u32 function, u64 *value)
+{
+	const struct intel_pmic_opregion_data *d = opregion->data;
+	struct regmap *regmap = opregion->regmap;
+
+	if (!d->get_policy || !d->update_policy)
+		return -ENXIO;
+
+	if (function == ACPI_READ)
+		return d->get_policy(regmap, reg, bit, value);
+
+	if (*value != 0 && *value != 1)
+		return -EINVAL;
+
+	return d->update_policy(regmap, reg, bit, *value);
+}
+
+static bool pmic_thermal_is_temp(int address)
+{
+	return (address <= 0x3c) && !(address % 12);
+}
+
+static bool pmic_thermal_is_aux(int address)
+{
+	return (address >= 4 && address <= 0x40 && !((address - 4) % 12)) ||
+	       (address >= 8 && address <= 0x44 && !((address - 8) % 12));
+}
+
+static bool pmic_thermal_is_pen(int address)
+{
+	return address >= 0x48 && address <= 0x5c;
+}
+
+static acpi_status intel_pmic_thermal_handler(u32 function,
+		acpi_physical_address address, u32 bits, u64 *value64,
+		void *handler_context, void *region_context)
+{
+	struct intel_pmic_opregion *opregion = region_context;
+	const struct intel_pmic_opregion_data *d = opregion->data;
+	int reg, bit, result;
+
+	if (bits != 32 || !value64)
+		return AE_BAD_PARAMETER;
+
+	result = pmic_get_reg_bit(address, d->thermal_table,
+				  d->thermal_table_count, &reg, &bit);
+	if (result == -ENOENT)
+		return AE_BAD_PARAMETER;
+
+	mutex_lock(&opregion->lock);
+
+	if (pmic_thermal_is_temp(address))
+		result = pmic_thermal_temp(opregion, reg, function, value64);
+	else if (pmic_thermal_is_aux(address))
+		result = pmic_thermal_aux(opregion, reg, function, value64);
+	else if (pmic_thermal_is_pen(address))
+		result = pmic_thermal_pen(opregion, reg, bit,
+						function, value64);
+	else
+		result = -EINVAL;
+
+	mutex_unlock(&opregion->lock);
+
+	if (result < 0) {
+		if (result == -EINVAL)
+			return AE_BAD_PARAMETER;
+		else
+			return AE_ERROR;
+	}
+
+	return AE_OK;
+}
+
+static acpi_status intel_pmic_regs_handler(u32 function,
+		acpi_physical_address address, u32 bits, u64 *value64,
+		void *handler_context, void *region_context)
+{
+	struct intel_pmic_opregion *opregion = region_context;
+	int result = -EINVAL;
+
+	if (function == ACPI_WRITE) {
+		switch (address) {
+		case 0:
+			return AE_OK;
+		case 1:
+			opregion->ctx.addr |= (*value64 & 0xff) << 8;
+			return AE_OK;
+		case 2:
+			opregion->ctx.addr |= *value64 & 0xff;
+			return AE_OK;
+		case 3:
+			opregion->ctx.val = *value64 & 0xff;
+			return AE_OK;
+		case 4:
+			if (*value64) {
+				result = regmap_write(opregion->regmap, opregion->ctx.addr,
+						      opregion->ctx.val);
+			} else {
+				result = regmap_read(opregion->regmap, opregion->ctx.addr,
+						     &opregion->ctx.val);
+			}
+			opregion->ctx.addr = 0;
+		}
+	}
+
+	if (function == ACPI_READ && address == 3) {
+		*value64 = opregion->ctx.val;
+		return AE_OK;
+	}
+
+	if (result < 0) {
+		if (result == -EINVAL)
+			return AE_BAD_PARAMETER;
+		else
+			return AE_ERROR;
+	}
+
+	return AE_OK;
+}
+
+int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle,
+					struct regmap *regmap,
+					const struct intel_pmic_opregion_data *d)
+{
+	acpi_status status = AE_OK;
+	struct intel_pmic_opregion *opregion;
+	int ret;
+
+	if (!dev || !regmap || !d)
+		return -EINVAL;
+
+	if (!handle)
+		return -ENODEV;
+
+	opregion = devm_kzalloc(dev, sizeof(*opregion), GFP_KERNEL);
+	if (!opregion)
+		return -ENOMEM;
+
+	mutex_init(&opregion->lock);
+	opregion->regmap = regmap;
+	opregion->lpat_table = acpi_lpat_get_conversion_table(handle);
+
+	if (d->power_table_count)
+		status = acpi_install_address_space_handler(handle,
+						    PMIC_POWER_OPREGION_ID,
+						    intel_pmic_power_handler,
+						    NULL, opregion);
+	if (ACPI_FAILURE(status)) {
+		ret = -ENODEV;
+		goto out_error;
+	}
+
+	if (d->thermal_table_count)
+		status = acpi_install_address_space_handler(handle,
+						    PMIC_THERMAL_OPREGION_ID,
+						    intel_pmic_thermal_handler,
+						    NULL, opregion);
+	if (ACPI_FAILURE(status)) {
+		ret = -ENODEV;
+		goto out_remove_power_handler;
+	}
+
+	status = acpi_install_address_space_handler(handle,
+			PMIC_REGS_OPREGION_ID, intel_pmic_regs_handler, NULL,
+			opregion);
+	if (ACPI_FAILURE(status)) {
+		ret = -ENODEV;
+		goto out_remove_thermal_handler;
+	}
+
+	opregion->data = d;
+	intel_pmic_opregion = opregion;
+	return 0;
+
+out_remove_thermal_handler:
+	if (d->thermal_table_count)
+		acpi_remove_address_space_handler(handle,
+						  PMIC_THERMAL_OPREGION_ID,
+						  intel_pmic_thermal_handler);
+
+out_remove_power_handler:
+	if (d->power_table_count)
+		acpi_remove_address_space_handler(handle,
+						  PMIC_POWER_OPREGION_ID,
+						  intel_pmic_power_handler);
+
+out_error:
+	acpi_lpat_free_conversion_table(opregion->lpat_table);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(intel_pmic_install_opregion_handler);
+
+/**
+ * intel_soc_pmic_exec_mipi_pmic_seq_element - Execute PMIC MIPI sequence
+ * @i2c_address:  I2C client address for the PMIC
+ * @reg_address:  PMIC register address
+ * @value:        New value for the register bits to change
+ * @mask:         Mask indicating which register bits to change
+ *
+ * DSI LCD panels describe an initialization sequence in the i915 VBT (Video
+ * BIOS Tables) using so called MIPI sequences. One possible element in these
+ * sequences is a PMIC specific element of 15 bytes.
+ *
+ * This function executes these PMIC specific elements sending the embedded
+ * commands to the PMIC.
+ *
+ * Return 0 on success, < 0 on failure.
+ */
+int intel_soc_pmic_exec_mipi_pmic_seq_element(u16 i2c_address, u32 reg_address,
+					      u32 value, u32 mask)
+{
+	const struct intel_pmic_opregion_data *d;
+	int ret;
+
+	if (!intel_pmic_opregion) {
+		pr_warn("%s: No PMIC registered\n", __func__);
+		return -ENXIO;
+	}
+
+	d = intel_pmic_opregion->data;
+
+	mutex_lock(&intel_pmic_opregion->lock);
+
+	if (d->exec_mipi_pmic_seq_element) {
+		ret = d->exec_mipi_pmic_seq_element(intel_pmic_opregion->regmap,
+						    i2c_address, reg_address,
+						    value, mask);
+	} else if (d->pmic_i2c_address) {
+		if (i2c_address == d->pmic_i2c_address) {
+			ret = regmap_update_bits(intel_pmic_opregion->regmap,
+						 reg_address, mask, value);
+		} else {
+			pr_err("%s: Unexpected i2c-addr: 0x%02x (reg-addr 0x%x value 0x%x mask 0x%x)\n",
+			       __func__, i2c_address, reg_address, value, mask);
+			ret = -ENXIO;
+		}
+	} else {
+		pr_warn("%s: Not implemented\n", __func__);
+		pr_warn("%s: i2c-addr: 0x%x reg-addr 0x%x value 0x%x mask 0x%x\n",
+			__func__, i2c_address, reg_address, value, mask);
+		ret = -EOPNOTSUPP;
+	}
+
+	mutex_unlock(&intel_pmic_opregion->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(intel_soc_pmic_exec_mipi_pmic_seq_element);
diff --git a/drivers/acpi/pmic/intel_pmic.h b/drivers/acpi/pmic/intel_pmic.h
new file mode 100644
index 000000000..d956b03a6
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __INTEL_PMIC_H
+#define __INTEL_PMIC_H
+
+#include <acpi/acpi_lpat.h>
+
+struct pmic_table {
+	int address;	/* operation region address */
+	int reg;	/* corresponding thermal register */
+	int bit;	/* control bit for power */
+};
+
+struct intel_pmic_opregion_data {
+	int (*get_power)(struct regmap *r, int reg, int bit, u64 *value);
+	int (*update_power)(struct regmap *r, int reg, int bit, bool on);
+	int (*get_raw_temp)(struct regmap *r, int reg);
+	int (*update_aux)(struct regmap *r, int reg, int raw_temp);
+	int (*get_policy)(struct regmap *r, int reg, int bit, u64 *value);
+	int (*update_policy)(struct regmap *r, int reg, int bit, int enable);
+	int (*exec_mipi_pmic_seq_element)(struct regmap *r, u16 i2c_address,
+					  u32 reg_address, u32 value, u32 mask);
+	int (*lpat_raw_to_temp)(struct acpi_lpat_conversion_table *lpat_table,
+				int raw);
+	struct pmic_table *power_table;
+	int power_table_count;
+	struct pmic_table *thermal_table;
+	int thermal_table_count;
+	/* For generic exec_mipi_pmic_seq_element handling */
+	int pmic_i2c_address;
+};
+
+int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle,
+					struct regmap *regmap,
+					const struct intel_pmic_opregion_data *d);
+
+#endif
diff --git a/drivers/acpi/pmic/intel_pmic_bxtwc.c b/drivers/acpi/pmic/intel_pmic_bxtwc.c
new file mode 100644
index 000000000..e24761518
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_bxtwc.c
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel BXT WhiskeyCove PMIC operation region driver
+ *
+ * Copyright (C) 2015 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include "intel_pmic.h"
+
+#define WHISKEY_COVE_ALRT_HIGH_BIT_MASK 0x0F
+#define WHISKEY_COVE_ADC_HIGH_BIT(x)	(((x & 0x0F) << 8))
+#define WHISKEY_COVE_ADC_CURSRC(x)	(((x & 0xF0) >> 4))
+#define VR_MODE_DISABLED        0
+#define VR_MODE_AUTO            BIT(0)
+#define VR_MODE_NORMAL          BIT(1)
+#define VR_MODE_SWITCH          BIT(2)
+#define VR_MODE_ECO             (BIT(0)|BIT(1))
+#define VSWITCH2_OUTPUT         BIT(5)
+#define VSWITCH1_OUTPUT         BIT(4)
+#define VUSBPHY_CHARGE          BIT(1)
+
+static struct pmic_table power_table[] = {
+	{
+		.address = 0x0,
+		.reg = 0x63,
+		.bit = VR_MODE_AUTO,
+	}, /* VDD1 -> VDD1CNT */
+	{
+		.address = 0x04,
+		.reg = 0x65,
+		.bit = VR_MODE_AUTO,
+	}, /* VDD2 -> VDD2CNT */
+	{
+		.address = 0x08,
+		.reg = 0x67,
+		.bit = VR_MODE_AUTO,
+	}, /* VDD3 -> VDD3CNT */
+	{
+		.address = 0x0c,
+		.reg = 0x6d,
+		.bit = VR_MODE_AUTO,
+	}, /* VLFX -> VFLEXCNT */
+	{
+		.address = 0x10,
+		.reg = 0x6f,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP1A -> VPROG1ACNT */
+	{
+		.address = 0x14,
+		.reg = 0x70,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP1B -> VPROG1BCNT */
+	{
+		.address = 0x18,
+		.reg = 0x71,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP1C -> VPROG1CCNT */
+	{
+		.address = 0x1c,
+		.reg = 0x72,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP1D -> VPROG1DCNT */
+	{
+		.address = 0x20,
+		.reg = 0x73,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP2A -> VPROG2ACNT */
+	{
+		.address = 0x24,
+		.reg = 0x74,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP2B -> VPROG2BCNT */
+	{
+		.address = 0x28,
+		.reg = 0x75,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP2C -> VPROG2CCNT */
+	{
+		.address = 0x2c,
+		.reg = 0x76,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP3A -> VPROG3ACNT */
+	{
+		.address = 0x30,
+		.reg = 0x77,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP3B -> VPROG3BCNT */
+	{
+		.address = 0x34,
+		.reg = 0x78,
+		.bit = VSWITCH2_OUTPUT,
+	}, /* VSW2 -> VLD0CNT Bit 5*/
+	{
+		.address = 0x38,
+		.reg = 0x78,
+		.bit = VSWITCH1_OUTPUT,
+	}, /* VSW1 -> VLD0CNT Bit 4 */
+	{
+		.address = 0x3c,
+		.reg = 0x78,
+		.bit = VUSBPHY_CHARGE,
+	}, /* VUPY -> VLDOCNT Bit 1 */
+	{
+		.address = 0x40,
+		.reg = 0x7b,
+		.bit = VR_MODE_NORMAL,
+	}, /* VRSO -> VREFSOCCNT*/
+	{
+		.address = 0x44,
+		.reg = 0xA0,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP1E -> VPROG1ECNT */
+	{
+		.address = 0x48,
+		.reg = 0xA1,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP1F -> VPROG1FCNT */
+	{
+		.address = 0x4c,
+		.reg = 0xA2,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP2D -> VPROG2DCNT */
+	{
+		.address = 0x50,
+		.reg = 0xA3,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP4A -> VPROG4ACNT */
+	{
+		.address = 0x54,
+		.reg = 0xA4,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP4B -> VPROG4BCNT */
+	{
+		.address = 0x58,
+		.reg = 0xA5,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP4C -> VPROG4CCNT */
+	{
+		.address = 0x5c,
+		.reg = 0xA6,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP4D -> VPROG4DCNT */
+	{
+		.address = 0x60,
+		.reg = 0xA7,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP5A -> VPROG5ACNT */
+	{
+		.address = 0x64,
+		.reg = 0xA8,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP5B -> VPROG5BCNT */
+	{
+		.address = 0x68,
+		.reg = 0xA9,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP6A -> VPROG6ACNT */
+	{
+		.address = 0x6c,
+		.reg = 0xAA,
+		.bit = VR_MODE_NORMAL,
+	}, /* VP6B -> VPROG6BCNT */
+	{
+		.address = 0x70,
+		.reg = 0x36,
+		.bit = BIT(2),
+	}, /* SDWN_N -> MODEMCTRL Bit 2 */
+	{
+		.address = 0x74,
+		.reg = 0x36,
+		.bit = BIT(0),
+	} /* MOFF -> MODEMCTRL Bit 0 */
+};
+
+static struct pmic_table thermal_table[] = {
+	{
+		.address = 0x00,
+		.reg = 0x4F39
+	},
+	{
+		.address = 0x04,
+		.reg = 0x4F24
+	},
+	{
+		.address = 0x08,
+		.reg = 0x4F26
+	},
+	{
+		.address = 0x0c,
+		.reg = 0x4F3B
+	},
+	{
+		.address = 0x10,
+		.reg = 0x4F28
+	},
+	{
+		.address = 0x14,
+		.reg = 0x4F2A
+	},
+	{
+		.address = 0x18,
+		.reg = 0x4F3D
+	},
+	{
+		.address = 0x1c,
+		.reg = 0x4F2C
+	},
+	{
+		.address = 0x20,
+		.reg = 0x4F2E
+	},
+	{
+		.address = 0x24,
+		.reg = 0x4F3F
+	},
+	{
+		.address = 0x28,
+		.reg = 0x4F30
+	},
+	{
+		.address = 0x30,
+		.reg = 0x4F41
+	},
+	{
+		.address = 0x34,
+		.reg = 0x4F32
+	},
+	{
+		.address = 0x3c,
+		.reg = 0x4F43
+	},
+	{
+		.address = 0x40,
+		.reg = 0x4F34
+	},
+	{
+		.address = 0x48,
+		.reg = 0x4F6A,
+		.bit = 0,
+	},
+	{
+		.address = 0x4C,
+		.reg = 0x4F6A,
+		.bit = 1
+	},
+	{
+		.address = 0x50,
+		.reg = 0x4F6A,
+		.bit = 2
+	},
+	{
+		.address = 0x54,
+		.reg = 0x4F6A,
+		.bit = 4
+	},
+	{
+		.address = 0x58,
+		.reg = 0x4F6A,
+		.bit = 5
+	},
+	{
+		.address = 0x5C,
+		.reg = 0x4F6A,
+		.bit = 3
+	},
+};
+
+static int intel_bxtwc_pmic_get_power(struct regmap *regmap, int reg,
+		int bit, u64 *value)
+{
+	int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	*value = (data & bit) ? 1 : 0;
+	return 0;
+}
+
+static int intel_bxtwc_pmic_update_power(struct regmap *regmap, int reg,
+		int bit, bool on)
+{
+	u8 val, mask = bit;
+
+	if (on)
+		val = 0xFF;
+	else
+		val = 0x0;
+
+	return regmap_update_bits(regmap, reg, mask, val);
+}
+
+static int intel_bxtwc_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+	unsigned int val, adc_val, reg_val;
+	u8 temp_l, temp_h, cursrc;
+	unsigned long rlsb;
+	static const unsigned long rlsb_array[] = {
+		0, 260420, 130210, 65100, 32550, 16280,
+		8140, 4070, 2030, 0, 260420, 130210 };
+
+	if (regmap_read(regmap, reg, &val))
+		return -EIO;
+	temp_l = (u8) val;
+
+	if (regmap_read(regmap, (reg - 1), &val))
+		return -EIO;
+	temp_h = (u8) val;
+
+	reg_val = temp_l | WHISKEY_COVE_ADC_HIGH_BIT(temp_h);
+	cursrc = WHISKEY_COVE_ADC_CURSRC(temp_h);
+	rlsb = rlsb_array[cursrc];
+	adc_val = reg_val * rlsb / 1000;
+
+	return adc_val;
+}
+
+static int
+intel_bxtwc_pmic_update_aux(struct regmap *regmap, int reg, int raw)
+{
+	u32 bsr_num;
+	u16 resi_val, count = 0, thrsh = 0;
+	u8 alrt_h, alrt_l, cursel = 0;
+
+	bsr_num = raw;
+	bsr_num /= (1 << 5);
+
+	count = fls(bsr_num) - 1;
+
+	cursel = clamp_t(s8, (count - 7), 0, 7);
+	thrsh = raw / (1 << (4 + cursel));
+
+	resi_val = (cursel << 9) | thrsh;
+	alrt_h = (resi_val >> 8) & WHISKEY_COVE_ALRT_HIGH_BIT_MASK;
+	if (regmap_update_bits(regmap,
+				reg - 1,
+				WHISKEY_COVE_ALRT_HIGH_BIT_MASK,
+				alrt_h))
+		return -EIO;
+
+	alrt_l = (u8)resi_val;
+	return regmap_write(regmap, reg, alrt_l);
+}
+
+static int
+intel_bxtwc_pmic_get_policy(struct regmap *regmap, int reg, int bit, u64 *value)
+{
+	u8 mask = BIT(bit);
+	unsigned int val;
+
+	if (regmap_read(regmap, reg, &val))
+		return -EIO;
+
+	*value = (val & mask) >> bit;
+	return 0;
+}
+
+static int
+intel_bxtwc_pmic_update_policy(struct regmap *regmap,
+				int reg, int bit, int enable)
+{
+	u8 mask = BIT(bit), val = enable << bit;
+
+	return regmap_update_bits(regmap, reg, mask, val);
+}
+
+static const struct intel_pmic_opregion_data intel_bxtwc_pmic_opregion_data = {
+	.get_power      = intel_bxtwc_pmic_get_power,
+	.update_power   = intel_bxtwc_pmic_update_power,
+	.get_raw_temp   = intel_bxtwc_pmic_get_raw_temp,
+	.update_aux     = intel_bxtwc_pmic_update_aux,
+	.get_policy     = intel_bxtwc_pmic_get_policy,
+	.update_policy  = intel_bxtwc_pmic_update_policy,
+	.lpat_raw_to_temp = acpi_lpat_raw_to_temp,
+	.power_table      = power_table,
+	.power_table_count = ARRAY_SIZE(power_table),
+	.thermal_table     = thermal_table,
+	.thermal_table_count = ARRAY_SIZE(thermal_table),
+};
+
+static int intel_bxtwc_pmic_opregion_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+
+	return intel_pmic_install_opregion_handler(&pdev->dev,
+			ACPI_HANDLE(pdev->dev.parent),
+			pmic->regmap,
+			&intel_bxtwc_pmic_opregion_data);
+}
+
+static const struct platform_device_id bxt_wc_opregion_id_table[] = {
+	{ .name = "bxt_wcove_region" },
+	{},
+};
+
+static struct platform_driver intel_bxtwc_pmic_opregion_driver = {
+	.probe = intel_bxtwc_pmic_opregion_probe,
+	.driver = {
+		.name = "bxt_whiskey_cove_pmic",
+	},
+	.id_table = bxt_wc_opregion_id_table,
+};
+builtin_platform_driver(intel_bxtwc_pmic_opregion_driver);
diff --git a/drivers/acpi/pmic/intel_pmic_bytcrc.c b/drivers/acpi/pmic/intel_pmic_bytcrc.c
new file mode 100644
index 000000000..9ea79f210
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_bytcrc.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Bay Trail Crystal Cove PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include "intel_pmic.h"
+
+#define PWR_SOURCE_SELECT	BIT(1)
+
+#define PMIC_A0LOCK_REG		0xc5
+
+static struct pmic_table power_table[] = {
+/*	{
+		.address = 0x00,
+		.reg = ??,
+		.bit = ??,
+	}, ** VSYS */
+	{
+		.address = 0x04,
+		.reg = 0x63,
+		.bit = 0x00,
+	}, /* SYSX -> VSYS_SX */
+	{
+		.address = 0x08,
+		.reg = 0x62,
+		.bit = 0x00,
+	}, /* SYSU -> VSYS_U */
+	{
+		.address = 0x0c,
+		.reg = 0x64,
+		.bit = 0x00,
+	}, /* SYSS -> VSYS_S */
+	{
+		.address = 0x10,
+		.reg = 0x6a,
+		.bit = 0x00,
+	}, /* V50S -> V5P0S */
+	{
+		.address = 0x14,
+		.reg = 0x6b,
+		.bit = 0x00,
+	}, /* HOST -> VHOST, USB2/3 host */
+	{
+		.address = 0x18,
+		.reg = 0x6c,
+		.bit = 0x00,
+	}, /* VBUS -> VBUS, USB2/3 OTG */
+	{
+		.address = 0x1c,
+		.reg = 0x6d,
+		.bit = 0x00,
+	}, /* HDMI -> VHDMI */
+/*	{
+		.address = 0x20,
+		.reg = ??,
+		.bit = ??,
+	}, ** S285 */
+	{
+		.address = 0x24,
+		.reg = 0x66,
+		.bit = 0x00,
+	}, /* X285 -> V2P85SX, camera */
+/*	{
+		.address = 0x28,
+		.reg = ??,
+		.bit = ??,
+	}, ** V33A */
+	{
+		.address = 0x2c,
+		.reg = 0x69,
+		.bit = 0x00,
+	}, /* V33S -> V3P3S, display/ssd/audio */
+	{
+		.address = 0x30,
+		.reg = 0x68,
+		.bit = 0x00,
+	}, /* V33U -> V3P3U, SDIO wifi&bt */
+/*	{
+		.address = 0x34 .. 0x40,
+		.reg = ??,
+		.bit = ??,
+	}, ** V33I, V18A, REFQ, V12A */
+	{
+		.address = 0x44,
+		.reg = 0x5c,
+		.bit = 0x00,
+	}, /* V18S -> V1P8S, SOC/USB PHY/SIM */
+	{
+		.address = 0x48,
+		.reg = 0x5d,
+		.bit = 0x00,
+	}, /* V18X -> V1P8SX, eMMC/camara/audio */
+	{
+		.address = 0x4c,
+		.reg = 0x5b,
+		.bit = 0x00,
+	}, /* V18U -> V1P8U, LPDDR */
+	{
+		.address = 0x50,
+		.reg = 0x61,
+		.bit = 0x00,
+	}, /* V12X -> V1P2SX, SOC SFR */
+	{
+		.address = 0x54,
+		.reg = 0x60,
+		.bit = 0x00,
+	}, /* V12S -> V1P2S, MIPI */
+/*	{
+		.address = 0x58,
+		.reg = ??,
+		.bit = ??,
+	}, ** V10A */
+	{
+		.address = 0x5c,
+		.reg = 0x56,
+		.bit = 0x00,
+	}, /* V10S -> V1P0S, SOC GFX */
+	{
+		.address = 0x60,
+		.reg = 0x57,
+		.bit = 0x00,
+	}, /* V10X -> V1P0SX, SOC display/DDR IO/PCIe */
+	{
+		.address = 0x64,
+		.reg = 0x59,
+		.bit = 0x00,
+	}, /* V105 -> V1P05S, L2 SRAM */
+};
+
+static struct pmic_table thermal_table[] = {
+	{
+		.address = 0x00,
+		.reg = 0x75
+	},
+	{
+		.address = 0x04,
+		.reg = 0x95
+	},
+	{
+		.address = 0x08,
+		.reg = 0x97
+	},
+	{
+		.address = 0x0c,
+		.reg = 0x77
+	},
+	{
+		.address = 0x10,
+		.reg = 0x9a
+	},
+	{
+		.address = 0x14,
+		.reg = 0x9c
+	},
+	{
+		.address = 0x18,
+		.reg = 0x79
+	},
+	{
+		.address = 0x1c,
+		.reg = 0x9f
+	},
+	{
+		.address = 0x20,
+		.reg = 0xa1
+	},
+	{
+		.address = 0x48,
+		.reg = 0x94
+	},
+	{
+		.address = 0x4c,
+		.reg = 0x99
+	},
+	{
+		.address = 0x50,
+		.reg = 0x9e
+	},
+};
+
+static int intel_crc_pmic_get_power(struct regmap *regmap, int reg,
+				    int bit, u64 *value)
+{
+	int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	*value = (data & PWR_SOURCE_SELECT) && (data & BIT(bit)) ? 1 : 0;
+	return 0;
+}
+
+static int intel_crc_pmic_update_power(struct regmap *regmap, int reg,
+				       int bit, bool on)
+{
+	int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	if (on) {
+		data |= PWR_SOURCE_SELECT | BIT(bit);
+	} else {
+		data &= ~BIT(bit);
+		data |= PWR_SOURCE_SELECT;
+	}
+
+	if (regmap_write(regmap, reg, data))
+		return -EIO;
+	return 0;
+}
+
+static int intel_crc_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+	int temp_l, temp_h;
+
+	/*
+	 * Raw temperature value is 10bits: 8bits in reg
+	 * and 2bits in reg-1: bit0,1
+	 */
+	if (regmap_read(regmap, reg, &temp_l) ||
+	    regmap_read(regmap, reg - 1, &temp_h))
+		return -EIO;
+
+	return temp_l | (temp_h & 0x3) << 8;
+}
+
+static int intel_crc_pmic_update_aux(struct regmap *regmap, int reg, int raw)
+{
+	return regmap_write(regmap, reg, raw) ||
+		regmap_update_bits(regmap, reg - 1, 0x3, raw >> 8) ? -EIO : 0;
+}
+
+static int intel_crc_pmic_get_policy(struct regmap *regmap,
+					int reg, int bit, u64 *value)
+{
+	int pen;
+
+	if (regmap_read(regmap, reg, &pen))
+		return -EIO;
+	*value = pen >> 7;
+	return 0;
+}
+
+static int intel_crc_pmic_update_policy(struct regmap *regmap,
+					int reg, int bit, int enable)
+{
+	int alert0;
+
+	/* Update to policy enable bit requires unlocking a0lock */
+	if (regmap_read(regmap, PMIC_A0LOCK_REG, &alert0))
+		return -EIO;
+
+	if (regmap_update_bits(regmap, PMIC_A0LOCK_REG, 0x01, 0))
+		return -EIO;
+
+	if (regmap_update_bits(regmap, reg, 0x80, enable << 7))
+		return -EIO;
+
+	/* restore alert0 */
+	if (regmap_write(regmap, PMIC_A0LOCK_REG, alert0))
+		return -EIO;
+
+	return 0;
+}
+
+static const struct intel_pmic_opregion_data intel_crc_pmic_opregion_data = {
+	.get_power	= intel_crc_pmic_get_power,
+	.update_power	= intel_crc_pmic_update_power,
+	.get_raw_temp	= intel_crc_pmic_get_raw_temp,
+	.update_aux	= intel_crc_pmic_update_aux,
+	.get_policy	= intel_crc_pmic_get_policy,
+	.update_policy	= intel_crc_pmic_update_policy,
+	.lpat_raw_to_temp = acpi_lpat_raw_to_temp,
+	.power_table	= power_table,
+	.power_table_count= ARRAY_SIZE(power_table),
+	.thermal_table	= thermal_table,
+	.thermal_table_count = ARRAY_SIZE(thermal_table),
+};
+
+static int intel_crc_pmic_opregion_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+	return intel_pmic_install_opregion_handler(&pdev->dev,
+			ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
+			&intel_crc_pmic_opregion_data);
+}
+
+static struct platform_driver intel_crc_pmic_opregion_driver = {
+	.probe = intel_crc_pmic_opregion_probe,
+	.driver = {
+		.name = "byt_crystal_cove_pmic",
+	},
+};
+builtin_platform_driver(intel_crc_pmic_opregion_driver);
diff --git a/drivers/acpi/pmic/intel_pmic_chtcrc.c b/drivers/acpi/pmic/intel_pmic_chtcrc.c
new file mode 100644
index 000000000..f9301c6f0
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_chtcrc.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Cherry Trail Crystal Cove PMIC operation region driver
+ *
+ * Copyright (C) 2019 Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include "intel_pmic.h"
+
+/*
+ * We have no docs for the CHT Crystal Cove PMIC. The Asus Zenfone-2 kernel
+ * code has 2 Crystal Cove regulator drivers, one calls the PMIC a "Crystal
+ * Cove Plus" PMIC and talks about Cherry Trail, so presumably that one
+ * could be used to get register info for the regulators if we need to
+ * implement regulator support in the future.
+ *
+ * For now the sole purpose of this driver is to make
+ * intel_soc_pmic_exec_mipi_pmic_seq_element work on devices with a
+ * CHT Crystal Cove PMIC.
+ */
+static const struct intel_pmic_opregion_data intel_chtcrc_pmic_opregion_data = {
+	.lpat_raw_to_temp = acpi_lpat_raw_to_temp,
+	.pmic_i2c_address = 0x6e,
+};
+
+static int intel_chtcrc_pmic_opregion_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+	return intel_pmic_install_opregion_handler(&pdev->dev,
+			ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
+			&intel_chtcrc_pmic_opregion_data);
+}
+
+static struct platform_driver intel_chtcrc_pmic_opregion_driver = {
+	.probe = intel_chtcrc_pmic_opregion_probe,
+	.driver = {
+		.name = "cht_crystal_cove_pmic",
+	},
+};
+builtin_platform_driver(intel_chtcrc_pmic_opregion_driver);
diff --git a/drivers/acpi/pmic/intel_pmic_chtdc_ti.c b/drivers/acpi/pmic/intel_pmic_chtdc_ti.c
new file mode 100644
index 000000000..418eec523
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_chtdc_ti.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Dollar Cove TI PMIC operation region driver
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * Rewritten and cleaned up
+ * Copyright (C) 2017 Takashi Iwai <tiwai@suse.de>
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/platform_device.h>
+#include "intel_pmic.h"
+
+/* registers stored in 16bit BE (high:low, total 10bit) */
+#define CHTDC_TI_VBAT		0x54
+#define CHTDC_TI_DIETEMP	0x56
+#define CHTDC_TI_BPTHERM	0x58
+#define CHTDC_TI_GPADC		0x5a
+
+static struct pmic_table chtdc_ti_power_table[] = {
+	{ .address = 0x00, .reg = 0x41 },
+	{ .address = 0x04, .reg = 0x42 },
+	{ .address = 0x08, .reg = 0x43 },
+	{ .address = 0x0c, .reg = 0x45 },
+	{ .address = 0x10, .reg = 0x46 },
+	{ .address = 0x14, .reg = 0x47 },
+	{ .address = 0x18, .reg = 0x48 },
+	{ .address = 0x1c, .reg = 0x49 },
+	{ .address = 0x20, .reg = 0x4a },
+	{ .address = 0x24, .reg = 0x4b },
+	{ .address = 0x28, .reg = 0x4c },
+	{ .address = 0x2c, .reg = 0x4d },
+	{ .address = 0x30, .reg = 0x4e },
+};
+
+static struct pmic_table chtdc_ti_thermal_table[] = {
+	{
+		.address = 0x00,
+		.reg = CHTDC_TI_GPADC
+	},
+	{
+		.address = 0x0c,
+		.reg = CHTDC_TI_GPADC
+	},
+	/* TMP2 -> SYSTEMP */
+	{
+		.address = 0x18,
+		.reg = CHTDC_TI_GPADC
+	},
+	/* TMP3 -> BPTHERM */
+	{
+		.address = 0x24,
+		.reg = CHTDC_TI_BPTHERM
+	},
+	{
+		.address = 0x30,
+		.reg = CHTDC_TI_GPADC
+	},
+	/* TMP5 -> DIETEMP */
+	{
+		.address = 0x3c,
+		.reg = CHTDC_TI_DIETEMP
+	},
+};
+
+static int chtdc_ti_pmic_get_power(struct regmap *regmap, int reg, int bit,
+				   u64 *value)
+{
+	int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	*value = data & 1;
+	return 0;
+}
+
+static int chtdc_ti_pmic_update_power(struct regmap *regmap, int reg, int bit,
+				      bool on)
+{
+	return regmap_update_bits(regmap, reg, 1, on);
+}
+
+static int chtdc_ti_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+	u8 buf[2];
+
+	if (regmap_bulk_read(regmap, reg, buf, 2))
+		return -EIO;
+
+	/* stored in big-endian */
+	return ((buf[0] & 0x03) << 8) | buf[1];
+}
+
+static const struct intel_pmic_opregion_data chtdc_ti_pmic_opregion_data = {
+	.get_power = chtdc_ti_pmic_get_power,
+	.update_power = chtdc_ti_pmic_update_power,
+	.get_raw_temp = chtdc_ti_pmic_get_raw_temp,
+	.lpat_raw_to_temp = acpi_lpat_raw_to_temp,
+	.power_table = chtdc_ti_power_table,
+	.power_table_count = ARRAY_SIZE(chtdc_ti_power_table),
+	.thermal_table = chtdc_ti_thermal_table,
+	.thermal_table_count = ARRAY_SIZE(chtdc_ti_thermal_table),
+	.pmic_i2c_address = 0x5e,
+};
+
+static int chtdc_ti_pmic_opregion_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+	int err;
+
+	err = intel_pmic_install_opregion_handler(&pdev->dev,
+			ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
+			&chtdc_ti_pmic_opregion_data);
+	if (err < 0)
+		return err;
+
+	/* Re-enumerate devices depending on PMIC */
+	acpi_dev_clear_dependencies(ACPI_COMPANION(pdev->dev.parent));
+	return 0;
+}
+
+static const struct platform_device_id chtdc_ti_pmic_opregion_id_table[] = {
+	{ .name = "chtdc_ti_region" },
+	{},
+};
+
+static struct platform_driver chtdc_ti_pmic_opregion_driver = {
+	.probe = chtdc_ti_pmic_opregion_probe,
+	.driver = {
+		.name = "cht_dollar_cove_ti_pmic",
+	},
+	.id_table = chtdc_ti_pmic_opregion_id_table,
+};
+builtin_platform_driver(chtdc_ti_pmic_opregion_driver);
diff --git a/drivers/acpi/pmic/intel_pmic_chtwc.c b/drivers/acpi/pmic/intel_pmic_chtwc.c
new file mode 100644
index 000000000..f2c42f4c7
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_chtwc.c
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel CHT Whiskey Cove PMIC operation region driver
+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on various non upstream patches to support the CHT Whiskey Cove PMIC:
+ * Copyright (C) 2013-2015 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include "intel_pmic.h"
+
+#define CHT_WC_V1P05A_CTRL		0x6e3b
+#define CHT_WC_V1P15_CTRL		0x6e3c
+#define CHT_WC_V1P05A_VSEL		0x6e3d
+#define CHT_WC_V1P15_VSEL		0x6e3e
+#define CHT_WC_V1P8A_CTRL		0x6e56
+#define CHT_WC_V1P8SX_CTRL		0x6e57
+#define CHT_WC_VDDQ_CTRL		0x6e58
+#define CHT_WC_V1P2A_CTRL		0x6e59
+#define CHT_WC_V1P2SX_CTRL		0x6e5a
+#define CHT_WC_V1P8A_VSEL		0x6e5b
+#define CHT_WC_VDDQ_VSEL		0x6e5c
+#define CHT_WC_V2P8SX_CTRL		0x6e5d
+#define CHT_WC_V3P3A_CTRL		0x6e5e
+#define CHT_WC_V3P3SD_CTRL		0x6e5f
+#define CHT_WC_VSDIO_CTRL		0x6e67
+#define CHT_WC_V3P3A_VSEL		0x6e68
+#define CHT_WC_VPROG1A_CTRL		0x6e90
+#define CHT_WC_VPROG1B_CTRL		0x6e91
+#define CHT_WC_VPROG1F_CTRL		0x6e95
+#define CHT_WC_VPROG2D_CTRL		0x6e99
+#define CHT_WC_VPROG3A_CTRL		0x6e9a
+#define CHT_WC_VPROG3B_CTRL		0x6e9b
+#define CHT_WC_VPROG4A_CTRL		0x6e9c
+#define CHT_WC_VPROG4B_CTRL		0x6e9d
+#define CHT_WC_VPROG4C_CTRL		0x6e9e
+#define CHT_WC_VPROG4D_CTRL		0x6e9f
+#define CHT_WC_VPROG5A_CTRL		0x6ea0
+#define CHT_WC_VPROG5B_CTRL		0x6ea1
+#define CHT_WC_VPROG6A_CTRL		0x6ea2
+#define CHT_WC_VPROG6B_CTRL		0x6ea3
+#define CHT_WC_VPROG1A_VSEL		0x6ec0
+#define CHT_WC_VPROG1B_VSEL		0x6ec1
+#define CHT_WC_V1P8SX_VSEL		0x6ec2
+#define CHT_WC_V1P2SX_VSEL		0x6ec3
+#define CHT_WC_V1P2A_VSEL		0x6ec4
+#define CHT_WC_VPROG1F_VSEL		0x6ec5
+#define CHT_WC_VSDIO_VSEL		0x6ec6
+#define CHT_WC_V2P8SX_VSEL		0x6ec7
+#define CHT_WC_V3P3SD_VSEL		0x6ec8
+#define CHT_WC_VPROG2D_VSEL		0x6ec9
+#define CHT_WC_VPROG3A_VSEL		0x6eca
+#define CHT_WC_VPROG3B_VSEL		0x6ecb
+#define CHT_WC_VPROG4A_VSEL		0x6ecc
+#define CHT_WC_VPROG4B_VSEL		0x6ecd
+#define CHT_WC_VPROG4C_VSEL		0x6ece
+#define CHT_WC_VPROG4D_VSEL		0x6ecf
+#define CHT_WC_VPROG5A_VSEL		0x6ed0
+#define CHT_WC_VPROG5B_VSEL		0x6ed1
+#define CHT_WC_VPROG6A_VSEL		0x6ed2
+#define CHT_WC_VPROG6B_VSEL		0x6ed3
+
+/*
+ * Regulator support is based on the non upstream patch:
+ * "regulator: whiskey_cove: implements Whiskey Cove pmic VRF support"
+ * https://github.com/intel-aero/meta-intel-aero/blob/master/recipes-kernel/linux/linux-yocto/0019-regulator-whiskey_cove-implements-WhiskeyCove-pmic-V.patch
+ */
+static struct pmic_table power_table[] = {
+	{
+		.address = 0x0,
+		.reg = CHT_WC_V1P8A_CTRL,
+		.bit = 0x01,
+	}, /* V18A */
+	{
+		.address = 0x04,
+		.reg = CHT_WC_V1P8SX_CTRL,
+		.bit = 0x07,
+	}, /* V18X */
+	{
+		.address = 0x08,
+		.reg = CHT_WC_VDDQ_CTRL,
+		.bit = 0x01,
+	}, /* VDDQ */
+	{
+		.address = 0x0c,
+		.reg = CHT_WC_V1P2A_CTRL,
+		.bit = 0x07,
+	}, /* V12A */
+	{
+		.address = 0x10,
+		.reg = CHT_WC_V1P2SX_CTRL,
+		.bit = 0x07,
+	}, /* V12X */
+	{
+		.address = 0x14,
+		.reg = CHT_WC_V2P8SX_CTRL,
+		.bit = 0x07,
+	}, /* V28X */
+	{
+		.address = 0x18,
+		.reg = CHT_WC_V3P3A_CTRL,
+		.bit = 0x01,
+	}, /* V33A */
+	{
+		.address = 0x1c,
+		.reg = CHT_WC_V3P3SD_CTRL,
+		.bit = 0x07,
+	}, /* V3SD */
+	{
+		.address = 0x20,
+		.reg = CHT_WC_VSDIO_CTRL,
+		.bit = 0x07,
+	}, /* VSD */
+/*	{
+		.address = 0x24,
+		.reg = ??,
+		.bit = ??,
+	}, ** VSW2 */
+/*	{
+		.address = 0x28,
+		.reg = ??,
+		.bit = ??,
+	}, ** VSW1 */
+/*	{
+		.address = 0x2c,
+		.reg = ??,
+		.bit = ??,
+	}, ** VUPY */
+/*	{
+		.address = 0x30,
+		.reg = ??,
+		.bit = ??,
+	}, ** VRSO */
+	{
+		.address = 0x34,
+		.reg = CHT_WC_VPROG1A_CTRL,
+		.bit = 0x07,
+	}, /* VP1A */
+	{
+		.address = 0x38,
+		.reg = CHT_WC_VPROG1B_CTRL,
+		.bit = 0x07,
+	}, /* VP1B */
+	{
+		.address = 0x3c,
+		.reg = CHT_WC_VPROG1F_CTRL,
+		.bit = 0x07,
+	}, /* VP1F */
+	{
+		.address = 0x40,
+		.reg = CHT_WC_VPROG2D_CTRL,
+		.bit = 0x07,
+	}, /* VP2D */
+	{
+		.address = 0x44,
+		.reg = CHT_WC_VPROG3A_CTRL,
+		.bit = 0x07,
+	}, /* VP3A */
+	{
+		.address = 0x48,
+		.reg = CHT_WC_VPROG3B_CTRL,
+		.bit = 0x07,
+	}, /* VP3B */
+	{
+		.address = 0x4c,
+		.reg = CHT_WC_VPROG4A_CTRL,
+		.bit = 0x07,
+	}, /* VP4A */
+	{
+		.address = 0x50,
+		.reg = CHT_WC_VPROG4B_CTRL,
+		.bit = 0x07,
+	}, /* VP4B */
+	{
+		.address = 0x54,
+		.reg = CHT_WC_VPROG4C_CTRL,
+		.bit = 0x07,
+	}, /* VP4C */
+	{
+		.address = 0x58,
+		.reg = CHT_WC_VPROG4D_CTRL,
+		.bit = 0x07,
+	}, /* VP4D */
+	{
+		.address = 0x5c,
+		.reg = CHT_WC_VPROG5A_CTRL,
+		.bit = 0x07,
+	}, /* VP5A */
+	{
+		.address = 0x60,
+		.reg = CHT_WC_VPROG5B_CTRL,
+		.bit = 0x07,
+	}, /* VP5B */
+	{
+		.address = 0x64,
+		.reg = CHT_WC_VPROG6A_CTRL,
+		.bit = 0x07,
+	}, /* VP6A */
+	{
+		.address = 0x68,
+		.reg = CHT_WC_VPROG6B_CTRL,
+		.bit = 0x07,
+	}, /* VP6B */
+/*	{
+		.address = 0x6c,
+		.reg = ??,
+		.bit = ??,
+	}  ** VP7A */
+};
+
+static int intel_cht_wc_pmic_get_power(struct regmap *regmap, int reg,
+		int bit, u64 *value)
+{
+	int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	*value = (data & bit) ? 1 : 0;
+	return 0;
+}
+
+static int intel_cht_wc_pmic_update_power(struct regmap *regmap, int reg,
+		int bitmask, bool on)
+{
+	return regmap_update_bits(regmap, reg, bitmask, on ? 1 : 0);
+}
+
+static int intel_cht_wc_exec_mipi_pmic_seq_element(struct regmap *regmap,
+						   u16 i2c_client_address,
+						   u32 reg_address,
+						   u32 value, u32 mask)
+{
+	u32 address;
+
+	if (i2c_client_address > 0xff || reg_address > 0xff) {
+		pr_warn("%s warning addresses too big client 0x%x reg 0x%x\n",
+			__func__, i2c_client_address, reg_address);
+		return -ERANGE;
+	}
+
+	address = (i2c_client_address << 8) | reg_address;
+
+	return regmap_update_bits(regmap, address, mask, value);
+}
+
+/*
+ * The thermal table and ops are empty, we do not support the Thermal opregion
+ * (DPTF) due to lacking documentation.
+ */
+static const struct intel_pmic_opregion_data intel_cht_wc_pmic_opregion_data = {
+	.get_power		= intel_cht_wc_pmic_get_power,
+	.update_power		= intel_cht_wc_pmic_update_power,
+	.exec_mipi_pmic_seq_element = intel_cht_wc_exec_mipi_pmic_seq_element,
+	.lpat_raw_to_temp	= acpi_lpat_raw_to_temp,
+	.power_table		= power_table,
+	.power_table_count	= ARRAY_SIZE(power_table),
+};
+
+static int intel_cht_wc_pmic_opregion_probe(struct platform_device *pdev)
+{
+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+
+	return intel_pmic_install_opregion_handler(&pdev->dev,
+			ACPI_HANDLE(pdev->dev.parent),
+			pmic->regmap,
+			&intel_cht_wc_pmic_opregion_data);
+}
+
+static const struct platform_device_id cht_wc_opregion_id_table[] = {
+	{ .name = "cht_wcove_region" },
+	{},
+};
+
+static struct platform_driver intel_cht_wc_pmic_opregion_driver = {
+	.probe = intel_cht_wc_pmic_opregion_probe,
+	.driver = {
+		.name = "cht_whiskey_cove_pmic",
+	},
+	.id_table = cht_wc_opregion_id_table,
+};
+builtin_platform_driver(intel_cht_wc_pmic_opregion_driver);
diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c
new file mode 100644
index 000000000..61bbe4c24
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_xpower.c
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * XPower AXP288 PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <asm/iosf_mbi.h>
+#include "intel_pmic.h"
+
+#define XPOWER_GPADC_LOW	0x5b
+#define XPOWER_GPI1_CTRL	0x92
+
+#define GPI1_LDO_MASK		GENMASK(2, 0)
+#define GPI1_LDO_ON		(3 << 0)
+#define GPI1_LDO_OFF		(4 << 0)
+
+#define AXP288_ADC_TS_CURRENT_ON_OFF_MASK		GENMASK(1, 0)
+#define AXP288_ADC_TS_CURRENT_OFF			(0 << 0)
+#define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING		(1 << 0)
+#define AXP288_ADC_TS_CURRENT_ON_ONDEMAND		(2 << 0)
+#define AXP288_ADC_TS_CURRENT_ON			(3 << 0)
+
+static struct pmic_table power_table[] = {
+	{
+		.address = 0x00,
+		.reg = 0x13,
+		.bit = 0x05,
+	}, /* ALD1 */
+	{
+		.address = 0x04,
+		.reg = 0x13,
+		.bit = 0x06,
+	}, /* ALD2 */
+	{
+		.address = 0x08,
+		.reg = 0x13,
+		.bit = 0x07,
+	}, /* ALD3 */
+	{
+		.address = 0x0c,
+		.reg = 0x12,
+		.bit = 0x03,
+	}, /* DLD1 */
+	{
+		.address = 0x10,
+		.reg = 0x12,
+		.bit = 0x04,
+	}, /* DLD2 */
+	{
+		.address = 0x14,
+		.reg = 0x12,
+		.bit = 0x05,
+	}, /* DLD3 */
+	{
+		.address = 0x18,
+		.reg = 0x12,
+		.bit = 0x06,
+	}, /* DLD4 */
+	{
+		.address = 0x1c,
+		.reg = 0x12,
+		.bit = 0x00,
+	}, /* ELD1 */
+	{
+		.address = 0x20,
+		.reg = 0x12,
+		.bit = 0x01,
+	}, /* ELD2 */
+	{
+		.address = 0x24,
+		.reg = 0x12,
+		.bit = 0x02,
+	}, /* ELD3 */
+	{
+		.address = 0x28,
+		.reg = 0x13,
+		.bit = 0x02,
+	}, /* FLD1 */
+	{
+		.address = 0x2c,
+		.reg = 0x13,
+		.bit = 0x03,
+	}, /* FLD2 */
+	{
+		.address = 0x30,
+		.reg = 0x13,
+		.bit = 0x04,
+	}, /* FLD3 */
+	{
+		.address = 0x34,
+		.reg = 0x10,
+		.bit = 0x03,
+	}, /* BUC1 */
+	{
+		.address = 0x38,
+		.reg = 0x10,
+		.bit = 0x06,
+	}, /* BUC2 */
+	{
+		.address = 0x3c,
+		.reg = 0x10,
+		.bit = 0x05,
+	}, /* BUC3 */
+	{
+		.address = 0x40,
+		.reg = 0x10,
+		.bit = 0x04,
+	}, /* BUC4 */
+	{
+		.address = 0x44,
+		.reg = 0x10,
+		.bit = 0x01,
+	}, /* BUC5 */
+	{
+		.address = 0x48,
+		.reg = 0x10,
+		.bit = 0x00
+	}, /* BUC6 */
+	{
+		.address = 0x4c,
+		.reg = 0x92,
+	}, /* GPI1 */
+};
+
+/* TMP0 - TMP5 are the same, all from GPADC */
+static struct pmic_table thermal_table[] = {
+	{
+		.address = 0x00,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x0c,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x18,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x24,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x30,
+		.reg = XPOWER_GPADC_LOW
+	},
+	{
+		.address = 0x3c,
+		.reg = XPOWER_GPADC_LOW
+	},
+};
+
+static int intel_xpower_pmic_get_power(struct regmap *regmap, int reg,
+				       int bit, u64 *value)
+{
+	int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	/* GPIO1 LDO regulator needs special handling */
+	if (reg == XPOWER_GPI1_CTRL)
+		*value = ((data & GPI1_LDO_MASK) == GPI1_LDO_ON);
+	else
+		*value = (data & BIT(bit)) ? 1 : 0;
+
+	return 0;
+}
+
+static int intel_xpower_pmic_update_power(struct regmap *regmap, int reg,
+					  int bit, bool on)
+{
+	int data, ret;
+
+	ret = iosf_mbi_block_punit_i2c_access();
+	if (ret)
+		return ret;
+
+	/* GPIO1 LDO regulator needs special handling */
+	if (reg == XPOWER_GPI1_CTRL) {
+		ret = regmap_update_bits(regmap, reg, GPI1_LDO_MASK,
+					 on ? GPI1_LDO_ON : GPI1_LDO_OFF);
+		goto out;
+	}
+
+	if (regmap_read(regmap, reg, &data)) {
+		ret = -EIO;
+		goto out;
+	}
+
+	if (on)
+		data |= BIT(bit);
+	else
+		data &= ~BIT(bit);
+
+	if (regmap_write(regmap, reg, data))
+		ret = -EIO;
+out:
+	iosf_mbi_unblock_punit_i2c_access();
+
+	return ret;
+}
+
+/**
+ * intel_xpower_pmic_get_raw_temp(): Get raw temperature reading from the PMIC
+ *
+ * @regmap: regmap of the PMIC device
+ * @reg: register to get the reading
+ *
+ * Return a positive value on success, errno on failure.
+ */
+static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+	int ret, adc_ts_pin_ctrl;
+	u8 buf[2];
+
+	/*
+	 * The current-source used for the battery temp-sensor (TS) is shared
+	 * with the GPADC. For proper fuel-gauge and charger operation the TS
+	 * current-source needs to be permanently on. But to read the GPADC we
+	 * need to temporary switch the TS current-source to ondemand, so that
+	 * the GPADC can use it, otherwise we will always read an all 0 value.
+	 *
+	 * Note that the switching from on to on-ondemand is not necessary
+	 * when the TS current-source is off (this happens on devices which
+	 * do not use the TS-pin).
+	 */
+	ret = regmap_read(regmap, AXP288_ADC_TS_PIN_CTRL, &adc_ts_pin_ctrl);
+	if (ret)
+		return ret;
+
+	if (adc_ts_pin_ctrl & AXP288_ADC_TS_CURRENT_ON_OFF_MASK) {
+		/*
+		 * AXP288_ADC_TS_PIN_CTRL reads are cached by the regmap, so
+		 * this does to a single I2C-transfer, and thus there is no
+		 * need to explicitly call iosf_mbi_block_punit_i2c_access().
+		 */
+		ret = regmap_update_bits(regmap, AXP288_ADC_TS_PIN_CTRL,
+					 AXP288_ADC_TS_CURRENT_ON_OFF_MASK,
+					 AXP288_ADC_TS_CURRENT_ON_ONDEMAND);
+		if (ret)
+			return ret;
+
+		/* Wait a bit after switching the current-source */
+		usleep_range(6000, 10000);
+	}
+
+	ret = iosf_mbi_block_punit_i2c_access();
+	if (ret)
+		return ret;
+
+	ret = regmap_bulk_read(regmap, AXP288_GP_ADC_H, buf, 2);
+	if (ret == 0)
+		ret = (buf[0] << 4) + ((buf[1] >> 4) & 0x0f);
+
+	if (adc_ts_pin_ctrl & AXP288_ADC_TS_CURRENT_ON_OFF_MASK) {
+		regmap_update_bits(regmap, AXP288_ADC_TS_PIN_CTRL,
+				   AXP288_ADC_TS_CURRENT_ON_OFF_MASK,
+				   AXP288_ADC_TS_CURRENT_ON);
+	}
+
+	iosf_mbi_unblock_punit_i2c_access();
+
+	return ret;
+}
+
+static int intel_xpower_exec_mipi_pmic_seq_element(struct regmap *regmap,
+						   u16 i2c_address, u32 reg_address,
+						   u32 value, u32 mask)
+{
+	int ret;
+
+	if (i2c_address != 0x34) {
+		pr_err("%s: Unexpected i2c-addr: 0x%02x (reg-addr 0x%x value 0x%x mask 0x%x)\n",
+		       __func__, i2c_address, reg_address, value, mask);
+		return -ENXIO;
+	}
+
+	ret = iosf_mbi_block_punit_i2c_access();
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(regmap, reg_address, mask, value);
+
+	iosf_mbi_unblock_punit_i2c_access();
+
+	return ret;
+}
+
+static int intel_xpower_lpat_raw_to_temp(struct acpi_lpat_conversion_table *lpat_table,
+					 int raw)
+{
+	struct acpi_lpat first = lpat_table->lpat[0];
+	struct acpi_lpat last = lpat_table->lpat[lpat_table->lpat_count - 1];
+
+	/*
+	 * Some LPAT tables in the ACPI Device for the AXP288 PMIC for some
+	 * reason only describe a small temperature range, e.g. 27° - 37°
+	 * Celcius. Resulting in errors when the tablet is idle in a cool room.
+	 *
+	 * To avoid these errors clamp the raw value to be inside the LPAT.
+	 */
+	if (first.raw < last.raw)
+		raw = clamp(raw, first.raw, last.raw);
+	else
+		raw = clamp(raw, last.raw, first.raw);
+
+	return acpi_lpat_raw_to_temp(lpat_table, raw);
+}
+
+static const struct intel_pmic_opregion_data intel_xpower_pmic_opregion_data = {
+	.get_power = intel_xpower_pmic_get_power,
+	.update_power = intel_xpower_pmic_update_power,
+	.get_raw_temp = intel_xpower_pmic_get_raw_temp,
+	.exec_mipi_pmic_seq_element = intel_xpower_exec_mipi_pmic_seq_element,
+	.lpat_raw_to_temp = intel_xpower_lpat_raw_to_temp,
+	.power_table = power_table,
+	.power_table_count = ARRAY_SIZE(power_table),
+	.thermal_table = thermal_table,
+	.thermal_table_count = ARRAY_SIZE(thermal_table),
+	.pmic_i2c_address = 0x34,
+};
+
+static acpi_status intel_xpower_pmic_gpio_handler(u32 function,
+		acpi_physical_address address, u32 bit_width, u64 *value,
+		void *handler_context, void *region_context)
+{
+	return AE_OK;
+}
+
+static int intel_xpower_pmic_opregion_probe(struct platform_device *pdev)
+{
+	struct device *parent = pdev->dev.parent;
+	struct axp20x_dev *axp20x = dev_get_drvdata(parent);
+	acpi_status status;
+	int result;
+
+	status = acpi_install_address_space_handler(ACPI_HANDLE(parent),
+			ACPI_ADR_SPACE_GPIO, intel_xpower_pmic_gpio_handler,
+			NULL, NULL);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	result = intel_pmic_install_opregion_handler(&pdev->dev,
+					ACPI_HANDLE(parent), axp20x->regmap,
+					&intel_xpower_pmic_opregion_data);
+	if (result)
+		acpi_remove_address_space_handler(ACPI_HANDLE(parent),
+						  ACPI_ADR_SPACE_GPIO,
+						  intel_xpower_pmic_gpio_handler);
+
+	return result;
+}
+
+static struct platform_driver intel_xpower_pmic_opregion_driver = {
+	.probe = intel_xpower_pmic_opregion_probe,
+	.driver = {
+		.name = "axp288_pmic_acpi",
+	},
+};
+builtin_platform_driver(intel_xpower_pmic_opregion_driver);
diff --git a/drivers/acpi/pmic/tps68470_pmic.c b/drivers/acpi/pmic/tps68470_pmic.c
new file mode 100644
index 000000000..ebd03e472
--- /dev/null
+++ b/drivers/acpi/pmic/tps68470_pmic.c
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI TPS68470 PMIC operation region driver
+ *
+ * Copyright (C) 2017 Intel Corporation. All rights reserved.
+ *
+ * Author: Rajmohan Mani <rajmohan.mani@intel.com>
+ *
+ * Based on drivers/acpi/pmic/intel_pmic* drivers
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/mfd/tps68470.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct tps68470_pmic_table {
+	u32 address;		/* operation region address */
+	u32 reg;		/* corresponding register */
+	u32 bitmask;		/* bit mask for power, clock */
+};
+
+#define TI_PMIC_POWER_OPREGION_ID		0xB0
+#define TI_PMIC_VR_VAL_OPREGION_ID		0xB1
+#define TI_PMIC_CLOCK_OPREGION_ID		0xB2
+#define TI_PMIC_CLKFREQ_OPREGION_ID		0xB3
+
+struct tps68470_pmic_opregion {
+	struct mutex lock;
+	struct regmap *regmap;
+};
+
+#define S_IO_I2C_EN	(BIT(0) | BIT(1))
+
+static const struct tps68470_pmic_table power_table[] = {
+	{
+		.address = 0x00,
+		.reg = TPS68470_REG_S_I2C_CTL,
+		.bitmask = S_IO_I2C_EN,
+		/* S_I2C_CTL */
+	},
+	{
+		.address = 0x04,
+		.reg = TPS68470_REG_VCMCTL,
+		.bitmask = BIT(0),
+		/* VCMCTL */
+	},
+	{
+		.address = 0x08,
+		.reg = TPS68470_REG_VAUX1CTL,
+		.bitmask = BIT(0),
+		/* VAUX1_CTL */
+	},
+	{
+		.address = 0x0C,
+		.reg = TPS68470_REG_VAUX2CTL,
+		.bitmask = BIT(0),
+		/* VAUX2CTL */
+	},
+	{
+		.address = 0x10,
+		.reg = TPS68470_REG_VACTL,
+		.bitmask = BIT(0),
+		/* VACTL */
+	},
+	{
+		.address = 0x14,
+		.reg = TPS68470_REG_VDCTL,
+		.bitmask = BIT(0),
+		/* VDCTL */
+	},
+};
+
+/* Table to set voltage regulator value */
+static const struct tps68470_pmic_table vr_val_table[] = {
+	{
+		.address = 0x00,
+		.reg = TPS68470_REG_VSIOVAL,
+		.bitmask = TPS68470_VSIOVAL_IOVOLT_MASK,
+		/* TPS68470_REG_VSIOVAL */
+	},
+	{
+		.address = 0x04,
+		.reg = TPS68470_REG_VIOVAL,
+		.bitmask = TPS68470_VIOVAL_IOVOLT_MASK,
+		/* TPS68470_REG_VIOVAL */
+	},
+	{
+		.address = 0x08,
+		.reg = TPS68470_REG_VCMVAL,
+		.bitmask = TPS68470_VCMVAL_VCVOLT_MASK,
+		/* TPS68470_REG_VCMVAL */
+	},
+	{
+		.address = 0x0C,
+		.reg = TPS68470_REG_VAUX1VAL,
+		.bitmask = TPS68470_VAUX1VAL_AUX1VOLT_MASK,
+		/* TPS68470_REG_VAUX1VAL */
+	},
+	{
+		.address = 0x10,
+		.reg = TPS68470_REG_VAUX2VAL,
+		.bitmask = TPS68470_VAUX2VAL_AUX2VOLT_MASK,
+		/* TPS68470_REG_VAUX2VAL */
+	},
+	{
+		.address = 0x14,
+		.reg = TPS68470_REG_VAVAL,
+		.bitmask = TPS68470_VAVAL_AVOLT_MASK,
+		/* TPS68470_REG_VAVAL */
+	},
+	{
+		.address = 0x18,
+		.reg = TPS68470_REG_VDVAL,
+		.bitmask = TPS68470_VDVAL_DVOLT_MASK,
+		/* TPS68470_REG_VDVAL */
+	},
+};
+
+/* Table to configure clock frequency */
+static const struct tps68470_pmic_table clk_freq_table[] = {
+	{
+		.address = 0x00,
+		.reg = TPS68470_REG_POSTDIV2,
+		.bitmask = BIT(0) | BIT(1),
+		/* TPS68470_REG_POSTDIV2 */
+	},
+	{
+		.address = 0x04,
+		.reg = TPS68470_REG_BOOSTDIV,
+		.bitmask = 0x1F,
+		/* TPS68470_REG_BOOSTDIV */
+	},
+	{
+		.address = 0x08,
+		.reg = TPS68470_REG_BUCKDIV,
+		.bitmask = 0x0F,
+		/* TPS68470_REG_BUCKDIV */
+	},
+	{
+		.address = 0x0C,
+		.reg = TPS68470_REG_PLLSWR,
+		.bitmask = 0x13,
+		/* TPS68470_REG_PLLSWR */
+	},
+	{
+		.address = 0x10,
+		.reg = TPS68470_REG_XTALDIV,
+		.bitmask = 0xFF,
+		/* TPS68470_REG_XTALDIV */
+	},
+	{
+		.address = 0x14,
+		.reg = TPS68470_REG_PLLDIV,
+		.bitmask = 0xFF,
+		/* TPS68470_REG_PLLDIV */
+	},
+	{
+		.address = 0x18,
+		.reg = TPS68470_REG_POSTDIV,
+		.bitmask = 0x83,
+		/* TPS68470_REG_POSTDIV */
+	},
+};
+
+/* Table to configure and enable clocks */
+static const struct tps68470_pmic_table clk_table[] = {
+	{
+		.address = 0x00,
+		.reg = TPS68470_REG_PLLCTL,
+		.bitmask = 0xF5,
+		/* TPS68470_REG_PLLCTL */
+	},
+	{
+		.address = 0x04,
+		.reg = TPS68470_REG_PLLCTL2,
+		.bitmask = BIT(0),
+		/* TPS68470_REG_PLLCTL2 */
+	},
+	{
+		.address = 0x08,
+		.reg = TPS68470_REG_CLKCFG1,
+		.bitmask = TPS68470_CLKCFG1_MODE_A_MASK |
+			TPS68470_CLKCFG1_MODE_B_MASK,
+		/* TPS68470_REG_CLKCFG1 */
+	},
+	{
+		.address = 0x0C,
+		.reg = TPS68470_REG_CLKCFG2,
+		.bitmask = TPS68470_CLKCFG1_MODE_A_MASK |
+			TPS68470_CLKCFG1_MODE_B_MASK,
+		/* TPS68470_REG_CLKCFG2 */
+	},
+};
+
+static int pmic_get_reg_bit(u64 address,
+			    const struct tps68470_pmic_table *table,
+			    const unsigned int table_size, int *reg,
+			    int *bitmask)
+{
+	u64 i;
+
+	i = address / 4;
+	if (i >= table_size)
+		return -ENOENT;
+
+	if (!reg || !bitmask)
+		return -EINVAL;
+
+	*reg = table[i].reg;
+	*bitmask = table[i].bitmask;
+
+	return 0;
+}
+
+static int tps68470_pmic_get_power(struct regmap *regmap, int reg,
+				       int bitmask, u64 *value)
+{
+	unsigned int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	*value = (data & bitmask) ? 1 : 0;
+	return 0;
+}
+
+static int tps68470_pmic_get_vr_val(struct regmap *regmap, int reg,
+				       int bitmask, u64 *value)
+{
+	unsigned int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	*value = data & bitmask;
+	return 0;
+}
+
+static int tps68470_pmic_get_clk(struct regmap *regmap, int reg,
+				       int bitmask, u64 *value)
+{
+	unsigned int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	*value = (data & bitmask) ? 1 : 0;
+	return 0;
+}
+
+static int tps68470_pmic_get_clk_freq(struct regmap *regmap, int reg,
+				       int bitmask, u64 *value)
+{
+	unsigned int data;
+
+	if (regmap_read(regmap, reg, &data))
+		return -EIO;
+
+	*value = data & bitmask;
+	return 0;
+}
+
+static int ti_tps68470_regmap_update_bits(struct regmap *regmap, int reg,
+					int bitmask, u64 value)
+{
+	return regmap_update_bits(regmap, reg, bitmask, value);
+}
+
+static acpi_status tps68470_pmic_common_handler(u32 function,
+					  acpi_physical_address address,
+					  u32 bits, u64 *value,
+					  void *region_context,
+					  int (*get)(struct regmap *,
+						     int, int, u64 *),
+					  int (*update)(struct regmap *,
+							int, int, u64),
+					  const struct tps68470_pmic_table *tbl,
+					  unsigned int tbl_size)
+{
+	struct tps68470_pmic_opregion *opregion = region_context;
+	struct regmap *regmap = opregion->regmap;
+	int reg, ret, bitmask;
+
+	if (bits != 32)
+		return AE_BAD_PARAMETER;
+
+	ret = pmic_get_reg_bit(address, tbl, tbl_size, &reg, &bitmask);
+	if (ret < 0)
+		return AE_BAD_PARAMETER;
+
+	if (function == ACPI_WRITE && *value > bitmask)
+		return AE_BAD_PARAMETER;
+
+	mutex_lock(&opregion->lock);
+
+	ret = (function == ACPI_READ) ?
+		get(regmap, reg, bitmask, value) :
+		update(regmap, reg, bitmask, *value);
+
+	mutex_unlock(&opregion->lock);
+
+	return ret ? AE_ERROR : AE_OK;
+}
+
+static acpi_status tps68470_pmic_cfreq_handler(u32 function,
+					    acpi_physical_address address,
+					    u32 bits, u64 *value,
+					    void *handler_context,
+					    void *region_context)
+{
+	return tps68470_pmic_common_handler(function, address, bits, value,
+				region_context,
+				tps68470_pmic_get_clk_freq,
+				ti_tps68470_regmap_update_bits,
+				clk_freq_table,
+				ARRAY_SIZE(clk_freq_table));
+}
+
+static acpi_status tps68470_pmic_clk_handler(u32 function,
+				       acpi_physical_address address, u32 bits,
+				       u64 *value, void *handler_context,
+				       void *region_context)
+{
+	return tps68470_pmic_common_handler(function, address, bits, value,
+				region_context,
+				tps68470_pmic_get_clk,
+				ti_tps68470_regmap_update_bits,
+				clk_table,
+				ARRAY_SIZE(clk_table));
+}
+
+static acpi_status tps68470_pmic_vrval_handler(u32 function,
+					  acpi_physical_address address,
+					  u32 bits, u64 *value,
+					  void *handler_context,
+					  void *region_context)
+{
+	return tps68470_pmic_common_handler(function, address, bits, value,
+				region_context,
+				tps68470_pmic_get_vr_val,
+				ti_tps68470_regmap_update_bits,
+				vr_val_table,
+				ARRAY_SIZE(vr_val_table));
+}
+
+static acpi_status tps68470_pmic_pwr_handler(u32 function,
+					 acpi_physical_address address,
+					 u32 bits, u64 *value,
+					 void *handler_context,
+					 void *region_context)
+{
+	if (bits != 32)
+		return AE_BAD_PARAMETER;
+
+	/* set/clear for bit 0, bits 0 and 1 together */
+	if (function == ACPI_WRITE &&
+	    !(*value == 0 || *value == 1 || *value == 3)) {
+		return AE_BAD_PARAMETER;
+	}
+
+	return tps68470_pmic_common_handler(function, address, bits, value,
+				region_context,
+				tps68470_pmic_get_power,
+				ti_tps68470_regmap_update_bits,
+				power_table,
+				ARRAY_SIZE(power_table));
+}
+
+static int tps68470_pmic_opregion_probe(struct platform_device *pdev)
+{
+	struct regmap *tps68470_regmap = dev_get_drvdata(pdev->dev.parent);
+	acpi_handle handle = ACPI_HANDLE(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct tps68470_pmic_opregion *opregion;
+	acpi_status status;
+
+	if (!dev || !tps68470_regmap) {
+		dev_warn(dev, "dev or regmap is NULL\n");
+		return -EINVAL;
+	}
+
+	if (!handle) {
+		dev_warn(dev, "acpi handle is NULL\n");
+		return -ENODEV;
+	}
+
+	opregion = devm_kzalloc(dev, sizeof(*opregion), GFP_KERNEL);
+	if (!opregion)
+		return -ENOMEM;
+
+	mutex_init(&opregion->lock);
+	opregion->regmap = tps68470_regmap;
+
+	status = acpi_install_address_space_handler(handle,
+						    TI_PMIC_POWER_OPREGION_ID,
+						    tps68470_pmic_pwr_handler,
+						    NULL, opregion);
+	if (ACPI_FAILURE(status))
+		goto out_mutex_destroy;
+
+	status = acpi_install_address_space_handler(handle,
+						    TI_PMIC_VR_VAL_OPREGION_ID,
+						    tps68470_pmic_vrval_handler,
+						    NULL, opregion);
+	if (ACPI_FAILURE(status))
+		goto out_remove_power_handler;
+
+	status = acpi_install_address_space_handler(handle,
+						    TI_PMIC_CLOCK_OPREGION_ID,
+						    tps68470_pmic_clk_handler,
+						    NULL, opregion);
+	if (ACPI_FAILURE(status))
+		goto out_remove_vr_val_handler;
+
+	status = acpi_install_address_space_handler(handle,
+						    TI_PMIC_CLKFREQ_OPREGION_ID,
+						    tps68470_pmic_cfreq_handler,
+						    NULL, opregion);
+	if (ACPI_FAILURE(status))
+		goto out_remove_clk_handler;
+
+	return 0;
+
+out_remove_clk_handler:
+	acpi_remove_address_space_handler(handle, TI_PMIC_CLOCK_OPREGION_ID,
+					  tps68470_pmic_clk_handler);
+out_remove_vr_val_handler:
+	acpi_remove_address_space_handler(handle, TI_PMIC_VR_VAL_OPREGION_ID,
+					  tps68470_pmic_vrval_handler);
+out_remove_power_handler:
+	acpi_remove_address_space_handler(handle, TI_PMIC_POWER_OPREGION_ID,
+					  tps68470_pmic_pwr_handler);
+out_mutex_destroy:
+	mutex_destroy(&opregion->lock);
+	return -ENODEV;
+}
+
+static struct platform_driver tps68470_pmic_opregion_driver = {
+	.probe = tps68470_pmic_opregion_probe,
+	.driver = {
+		.name = "tps68470_pmic_opregion",
+	},
+};
+
+builtin_platform_driver(tps68470_pmic_opregion_driver)