Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 203 insertions, 0 deletions

diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
new file mode 100644
index 000000000..c2c3238ff
--- /dev/null
+++ b/drivers/ata/pata_cs5535.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pata-cs5535.c 	- CS5535 PATA for new ATA layer
+ *			  (C) 2005-2006 Red Hat Inc
+ *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and
+ * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
+ * and Alexander Kiausch <alex.kiausch@t-online.de>
+ *
+ * Loosely based on the piix & svwks drivers.
+ *
+ * Documentation:
+ *	Available from AMD web site.
+ * TODO
+ *	Review errata to see if serializing is necessary
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <asm/msr.h>
+
+#define DRV_NAME	"pata_cs5535"
+#define DRV_VERSION	"0.2.12"
+
+/*
+ *	The Geode (Aka Athlon GX now) uses an internal MSR based
+ *	bus system for control. Demented but there you go.
+ */
+
+#define MSR_ATAC_BASE    	0x51300000
+#define ATAC_GLD_MSR_CAP 	(MSR_ATAC_BASE+0)
+#define ATAC_GLD_MSR_CONFIG    (MSR_ATAC_BASE+0x01)
+#define ATAC_GLD_MSR_SMI       (MSR_ATAC_BASE+0x02)
+#define ATAC_GLD_MSR_ERROR     (MSR_ATAC_BASE+0x03)
+#define ATAC_GLD_MSR_PM        (MSR_ATAC_BASE+0x04)
+#define ATAC_GLD_MSR_DIAG      (MSR_ATAC_BASE+0x05)
+#define ATAC_IO_BAR            (MSR_ATAC_BASE+0x08)
+#define ATAC_RESET             (MSR_ATAC_BASE+0x10)
+#define ATAC_CH0D0_PIO         (MSR_ATAC_BASE+0x20)
+#define ATAC_CH0D0_DMA         (MSR_ATAC_BASE+0x21)
+#define ATAC_CH0D1_PIO         (MSR_ATAC_BASE+0x22)
+#define ATAC_CH0D1_DMA         (MSR_ATAC_BASE+0x23)
+#define ATAC_PCI_ABRTERR       (MSR_ATAC_BASE+0x24)
+
+#define ATAC_BM0_CMD_PRIM      0x00
+#define ATAC_BM0_STS_PRIM      0x02
+#define ATAC_BM0_PRD           0x04
+
+#define CS5535_CABLE_DETECT    0x48
+
+/**
+ *	cs5535_cable_detect	-	detect cable type
+ *	@ap: Port to detect on
+ *
+ *	Perform cable detection for ATA66 capable cable. Return a libata
+ *	cable type.
+ */
+
+static int cs5535_cable_detect(struct ata_port *ap)
+{
+	u8 cable;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable);
+	if (cable & 1)
+		return ATA_CBL_PATA80;
+	else
+		return ATA_CBL_PATA40;
+}
+
+/**
+ *	cs5535_set_piomode		-	PIO setup
+ *	@ap: ATA interface
+ *	@adev: device on the interface
+ *
+ *	Set our PIO requirements. The CS5535 is pretty clean about all this
+ */
+
+static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	static const u16 pio_timings[5] = {
+		0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131
+	};
+	static const u16 pio_cmd_timings[5] = {
+		0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
+	};
+	u32 reg, __maybe_unused dummy;
+	struct ata_device *pair = ata_dev_pair(adev);
+
+	int mode = adev->pio_mode - XFER_PIO_0;
+	int cmdmode = mode;
+
+	/* Command timing has to be for the lowest of the pair of devices */
+	if (pair) {
+		int pairmode = pair->pio_mode - XFER_PIO_0;
+		cmdmode = min(mode, pairmode);
+		/* Write the other drive timing register if it changed */
+		if (cmdmode < pairmode)
+			wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno,
+				pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0);
+	}
+	/* Write the drive timing register */
+	wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno,
+		pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0);
+
+	/* Set the PIO "format 1" bit in the DMA timing register */
+	rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
+	wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0);
+}
+
+/**
+ *	cs5535_set_dmamode		-	DMA timing setup
+ *	@ap: ATA interface
+ *	@adev: Device being configured
+ *
+ */
+
+static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	static const u32 udma_timings[5] = {
+		0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061
+	};
+	static const u32 mwdma_timings[3] = {
+		0x7F0FFFF3, 0x7F035352, 0x7F024241
+	};
+	u32 reg, __maybe_unused dummy;
+	int mode = adev->dma_mode;
+
+	rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
+	reg &= 0x80000000UL;
+	if (mode >= XFER_UDMA_0)
+		reg |= udma_timings[mode - XFER_UDMA_0];
+	else
+		reg |= mwdma_timings[mode - XFER_MW_DMA_0];
+	wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0);
+}
+
+static struct scsi_host_template cs5535_sht = {
+	ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations cs5535_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.cable_detect	= cs5535_cable_detect,
+	.set_piomode	= cs5535_set_piomode,
+	.set_dmamode	= cs5535_set_dmamode,
+};
+
+/**
+ *	cs5535_init_one		-	Initialise a CS5530
+ *	@dev: PCI device
+ *	@id: Entry in match table
+ *
+ *	Install a driver for the newly found CS5530 companion chip. Most of
+ *	this is just housekeeping. We have to set the chip up correctly and
+ *	turn off various bits of emulation magic.
+ */
+
+static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	static const struct ata_port_info info = {
+		.flags = ATA_FLAG_SLAVE_POSS,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
+		.udma_mask = ATA_UDMA4,
+		.port_ops = &cs5535_port_ops
+	};
+	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
+
+	return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0);
+}
+
+static const struct pci_device_id cs5535[] = {
+	{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), },
+
+	{ },
+};
+
+static struct pci_driver cs5535_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= cs5535,
+	.probe 		= cs5535_init_one,
+	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
+#endif
+};
+
+module_pci_driver(cs5535_pci_driver);
+
+MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch");
+MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cs5535);
+MODULE_VERSION(DRV_VERSION);