Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1496 insertions, 0 deletions

diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
new file mode 100644
index 000000000..d3c30a28c
--- /dev/null
+++ b/drivers/atm/solos-pci.c
@@ -0,0 +1,1496 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for the Solos PCI ADSL2+ card, designed to support Linux by
+ *  Traverse Technologies -- https://www.traverse.com.au/
+ *  Xrio Limited          -- http://www.xrio.com/
+ *
+ * Copyright © 2008 Traverse Technologies
+ * Copyright © 2008 Intel Corporation
+ *
+ * Authors: Nathan Williams <nathan@traverse.com.au>
+ *          David Woodhouse <dwmw2@infradead.org>
+ *          Treker Chen <treker@xrio.com>
+ */
+
+#define DEBUG
+#define VERBOSE_DEBUG
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/atm.h>
+#include <linux/atmdev.h>
+#include <linux/skbuff.h>
+#include <linux/sysfs.h>
+#include <linux/device.h>
+#include <linux/kobject.h>
+#include <linux/firmware.h>
+#include <linux/ctype.h>
+#include <linux/swab.h>
+#include <linux/slab.h>
+
+#define VERSION "1.04"
+#define DRIVER_VERSION 0x01
+#define PTAG "solos-pci"
+
+#define CONFIG_RAM_SIZE	128
+#define FLAGS_ADDR	0x7C
+#define IRQ_EN_ADDR	0x78
+#define FPGA_VER	0x74
+#define IRQ_CLEAR	0x70
+#define WRITE_FLASH	0x6C
+#define PORTS		0x68
+#define FLASH_BLOCK	0x64
+#define FLASH_BUSY	0x60
+#define FPGA_MODE	0x5C
+#define FLASH_MODE	0x58
+#define GPIO_STATUS	0x54
+#define DRIVER_VER	0x50
+#define TX_DMA_ADDR(port)	(0x40 + (4 * (port)))
+#define RX_DMA_ADDR(port)	(0x30 + (4 * (port)))
+
+#define DATA_RAM_SIZE	32768
+#define BUF_SIZE	2048
+#define OLD_BUF_SIZE	4096 /* For FPGA versions <= 2*/
+/* Old boards use ATMEL AD45DB161D flash */
+#define ATMEL_FPGA_PAGE	528 /* FPGA flash page size*/
+#define ATMEL_SOLOS_PAGE	512 /* Solos flash page size*/
+#define ATMEL_FPGA_BLOCK	(ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
+#define ATMEL_SOLOS_BLOCK	(ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
+/* Current boards use M25P/M25PE SPI flash */
+#define SPI_FLASH_BLOCK	(256 * 64)
+
+#define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
+#define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
+#define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2)
+
+#define RX_DMA_SIZE	2048
+
+#define FPGA_VERSION(a,b) (((a) << 8) + (b))
+#define LEGACY_BUFFERS	2
+#define DMA_SUPPORTED	4
+
+static int reset = 0;
+static int atmdebug = 0;
+static int firmware_upgrade = 0;
+static int fpga_upgrade = 0;
+static int db_firmware_upgrade = 0;
+static int db_fpga_upgrade = 0;
+
+struct pkt_hdr {
+	__le16 size;
+	__le16 vpi;
+	__le16 vci;
+	__le16 type;
+};
+
+struct solos_skb_cb {
+	struct atm_vcc *vcc;
+	uint32_t dma_addr;
+};
+
+
+#define SKB_CB(skb)		((struct solos_skb_cb *)skb->cb)
+
+#define PKT_DATA	0
+#define PKT_COMMAND	1
+#define PKT_POPEN	3
+#define PKT_PCLOSE	4
+#define PKT_STATUS	5
+
+struct solos_card {
+	void __iomem *config_regs;
+	void __iomem *buffers;
+	int nr_ports;
+	int tx_mask;
+	struct pci_dev *dev;
+	struct atm_dev *atmdev[4];
+	struct tasklet_struct tlet;
+	spinlock_t tx_lock;
+	spinlock_t tx_queue_lock;
+	spinlock_t cli_queue_lock;
+	spinlock_t param_queue_lock;
+	struct list_head param_queue;
+	struct sk_buff_head tx_queue[4];
+	struct sk_buff_head cli_queue[4];
+	struct sk_buff *tx_skb[4];
+	struct sk_buff *rx_skb[4];
+	unsigned char *dma_bounce;
+	wait_queue_head_t param_wq;
+	wait_queue_head_t fw_wq;
+	int using_dma;
+	int dma_alignment;
+	int fpga_version;
+	int buffer_size;
+	int atmel_flash;
+};
+
+
+struct solos_param {
+	struct list_head list;
+	pid_t pid;
+	int port;
+	struct sk_buff *response;
+};
+
+#define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data)
+
+MODULE_AUTHOR("Traverse Technologies <support@traverse.com.au>");
+MODULE_DESCRIPTION("Solos PCI driver");
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("solos-FPGA.bin");
+MODULE_FIRMWARE("solos-Firmware.bin");
+MODULE_FIRMWARE("solos-db-FPGA.bin");
+MODULE_PARM_DESC(reset, "Reset Solos chips on startup");
+MODULE_PARM_DESC(atmdebug, "Print ATM data");
+MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
+MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade");
+MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade");
+MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade");
+module_param(reset, int, 0444);
+module_param(atmdebug, int, 0644);
+module_param(firmware_upgrade, int, 0444);
+module_param(fpga_upgrade, int, 0444);
+module_param(db_firmware_upgrade, int, 0444);
+module_param(db_fpga_upgrade, int, 0444);
+
+static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
+		       struct atm_vcc *vcc);
+static uint32_t fpga_tx(struct solos_card *);
+static irqreturn_t solos_irq(int irq, void *dev_id);
+static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
+static int atm_init(struct solos_card *, struct device *);
+static void atm_remove(struct solos_card *);
+static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
+static void solos_bh(unsigned long);
+static int print_buffer(struct sk_buff *buf);
+
+static inline void solos_pop(struct atm_vcc *vcc, struct sk_buff *skb)
+{
+        if (vcc->pop)
+                vcc->pop(vcc, skb);
+        else
+                dev_kfree_skb_any(skb);
+}
+
+static ssize_t solos_param_show(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
+	struct solos_card *card = atmdev->dev_data;
+	struct solos_param prm;
+	struct sk_buff *skb;
+	struct pkt_hdr *header;
+	int buflen;
+
+	buflen = strlen(attr->attr.name) + 10;
+
+	skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
+	if (!skb) {
+		dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_show()\n");
+		return -ENOMEM;
+	}
+
+	header = skb_put(skb, sizeof(*header));
+
+	buflen = snprintf((void *)&header[1], buflen - 1,
+			  "L%05d\n%s\n", current->pid, attr->attr.name);
+	skb_put(skb, buflen);
+
+	header->size = cpu_to_le16(buflen);
+	header->vpi = cpu_to_le16(0);
+	header->vci = cpu_to_le16(0);
+	header->type = cpu_to_le16(PKT_COMMAND);
+
+	prm.pid = current->pid;
+	prm.response = NULL;
+	prm.port = SOLOS_CHAN(atmdev);
+
+	spin_lock_irq(&card->param_queue_lock);
+	list_add(&prm.list, &card->param_queue);
+	spin_unlock_irq(&card->param_queue_lock);
+
+	fpga_queue(card, prm.port, skb, NULL);
+
+	wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
+
+	spin_lock_irq(&card->param_queue_lock);
+	list_del(&prm.list);
+	spin_unlock_irq(&card->param_queue_lock);
+
+	if (!prm.response)
+		return -EIO;
+
+	buflen = prm.response->len;
+	memcpy(buf, prm.response->data, buflen);
+	kfree_skb(prm.response);
+
+	return buflen;
+}
+
+static ssize_t solos_param_store(struct device *dev, struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
+	struct solos_card *card = atmdev->dev_data;
+	struct solos_param prm;
+	struct sk_buff *skb;
+	struct pkt_hdr *header;
+	int buflen;
+	ssize_t ret;
+
+	buflen = strlen(attr->attr.name) + 11 + count;
+
+	skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
+	if (!skb) {
+		dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_store()\n");
+		return -ENOMEM;
+	}
+
+	header = skb_put(skb, sizeof(*header));
+
+	buflen = snprintf((void *)&header[1], buflen - 1,
+			  "L%05d\n%s\n%s\n", current->pid, attr->attr.name, buf);
+
+	skb_put(skb, buflen);
+	header->size = cpu_to_le16(buflen);
+	header->vpi = cpu_to_le16(0);
+	header->vci = cpu_to_le16(0);
+	header->type = cpu_to_le16(PKT_COMMAND);
+
+	prm.pid = current->pid;
+	prm.response = NULL;
+	prm.port = SOLOS_CHAN(atmdev);
+
+	spin_lock_irq(&card->param_queue_lock);
+	list_add(&prm.list, &card->param_queue);
+	spin_unlock_irq(&card->param_queue_lock);
+
+	fpga_queue(card, prm.port, skb, NULL);
+
+	wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
+
+	spin_lock_irq(&card->param_queue_lock);
+	list_del(&prm.list);
+	spin_unlock_irq(&card->param_queue_lock);
+
+	skb = prm.response;
+
+	if (!skb)
+		return -EIO;
+
+	buflen = skb->len;
+
+	/* Sometimes it has a newline, sometimes it doesn't. */
+	if (skb->data[buflen - 1] == '\n')
+		buflen--;
+
+	if (buflen == 2 && !strncmp(skb->data, "OK", 2))
+		ret = count;
+	else if (buflen == 5 && !strncmp(skb->data, "ERROR", 5))
+		ret = -EIO;
+	else {
+		/* We know we have enough space allocated for this; we allocated 
+		   it ourselves */
+		skb->data[buflen] = 0;
+	
+		dev_warn(&card->dev->dev, "Unexpected parameter response: '%s'\n",
+			 skb->data);
+		ret = -EIO;
+	}
+	kfree_skb(skb);
+
+	return ret;
+}
+
+static char *next_string(struct sk_buff *skb)
+{
+	int i = 0;
+	char *this = skb->data;
+	
+	for (i = 0; i < skb->len; i++) {
+		if (this[i] == '\n') {
+			this[i] = 0;
+			skb_pull(skb, i + 1);
+			return this;
+		}
+		if (!isprint(this[i]))
+			return NULL;
+	}
+	return NULL;
+}
+
+/*
+ * Status packet has fields separated by \n, starting with a version number
+ * for the information therein. Fields are....
+ *
+ *     packet version
+ *     RxBitRate	(version >= 1)
+ *     TxBitRate	(version >= 1)
+ *     State		(version >= 1)
+ *     LocalSNRMargin	(version >= 1)
+ *     LocalLineAttn	(version >= 1)
+ */       
+static int process_status(struct solos_card *card, int port, struct sk_buff *skb)
+{
+	char *str, *state_str, *snr, *attn;
+	int ver, rate_up, rate_down, err;
+
+	if (!card->atmdev[port])
+		return -ENODEV;
+
+	str = next_string(skb);
+	if (!str)
+		return -EIO;
+
+	err = kstrtoint(str, 10, &ver);
+	if (err) {
+		dev_warn(&card->dev->dev, "Unexpected status interrupt version\n");
+		return err;
+	}
+	if (ver < 1) {
+		dev_warn(&card->dev->dev, "Unexpected status interrupt version %d\n",
+			 ver);
+		return -EIO;
+	}
+
+	str = next_string(skb);
+	if (!str)
+		return -EIO;
+	if (!strcmp(str, "ERROR")) {
+		dev_dbg(&card->dev->dev, "Status packet indicated Solos error on port %d (starting up?)\n",
+			 port);
+		return 0;
+	}
+
+	err = kstrtoint(str, 10, &rate_down);
+	if (err)
+		return err;
+
+	str = next_string(skb);
+	if (!str)
+		return -EIO;
+	err = kstrtoint(str, 10, &rate_up);
+	if (err)
+		return err;
+
+	state_str = next_string(skb);
+	if (!state_str)
+		return -EIO;
+
+	/* Anything but 'Showtime' is down */
+	if (strcmp(state_str, "Showtime")) {
+		atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_LOST);
+		dev_info(&card->dev->dev, "Port %d: %s\n", port, state_str);
+		return 0;
+	}
+
+	snr = next_string(skb);
+	if (!snr)
+		return -EIO;
+	attn = next_string(skb);
+	if (!attn)
+		return -EIO;
+
+	dev_info(&card->dev->dev, "Port %d: %s @%d/%d kb/s%s%s%s%s\n",
+		 port, state_str, rate_down/1000, rate_up/1000,
+		 snr[0]?", SNR ":"", snr, attn[0]?", Attn ":"", attn);
+	
+	card->atmdev[port]->link_rate = rate_down / 424;
+	atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_FOUND);
+
+	return 0;
+}
+
+static int process_command(struct solos_card *card, int port, struct sk_buff *skb)
+{
+	struct solos_param *prm;
+	unsigned long flags;
+	int cmdpid;
+	int found = 0, err;
+
+	if (skb->len < 7)
+		return 0;
+
+	if (skb->data[0] != 'L'    || !isdigit(skb->data[1]) ||
+	    !isdigit(skb->data[2]) || !isdigit(skb->data[3]) ||
+	    !isdigit(skb->data[4]) || !isdigit(skb->data[5]) ||
+	    skb->data[6] != '\n')
+		return 0;
+
+	err = kstrtoint(&skb->data[1], 10, &cmdpid);
+	if (err)
+		return err;
+
+	spin_lock_irqsave(&card->param_queue_lock, flags);
+	list_for_each_entry(prm, &card->param_queue, list) {
+		if (prm->port == port && prm->pid == cmdpid) {
+			prm->response = skb;
+			skb_pull(skb, 7);
+			wake_up(&card->param_wq);
+			found = 1;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&card->param_queue_lock, flags);
+	return found;
+}
+
+static ssize_t console_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
+	struct solos_card *card = atmdev->dev_data;
+	struct sk_buff *skb;
+	unsigned int len;
+
+	spin_lock_bh(&card->cli_queue_lock);
+	skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
+	spin_unlock_bh(&card->cli_queue_lock);
+	if(skb == NULL)
+		return sprintf(buf, "No data.\n");
+
+	len = skb->len;
+	memcpy(buf, skb->data, len);
+
+	kfree_skb(skb);
+	return len;
+}
+
+static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
+{
+	struct sk_buff *skb;
+	struct pkt_hdr *header;
+
+	if (size > (BUF_SIZE - sizeof(*header))) {
+		dev_dbg(&card->dev->dev, "Command is too big.  Dropping request\n");
+		return 0;
+	}
+	skb = alloc_skb(size + sizeof(*header), GFP_ATOMIC);
+	if (!skb) {
+		dev_warn(&card->dev->dev, "Failed to allocate sk_buff in send_command()\n");
+		return 0;
+	}
+
+	header = skb_put(skb, sizeof(*header));
+
+	header->size = cpu_to_le16(size);
+	header->vpi = cpu_to_le16(0);
+	header->vci = cpu_to_le16(0);
+	header->type = cpu_to_le16(PKT_COMMAND);
+
+	skb_put_data(skb, buf, size);
+
+	fpga_queue(card, dev, skb, NULL);
+
+	return 0;
+}
+
+static ssize_t console_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
+	struct solos_card *card = atmdev->dev_data;
+	int err;
+
+	err = send_command(card, SOLOS_CHAN(atmdev), buf, count);
+
+	return err?:count;
+}
+
+struct geos_gpio_attr {
+	struct device_attribute attr;
+	int offset;
+};
+
+#define SOLOS_GPIO_ATTR(_name, _mode, _show, _store, _offset)	\
+	struct geos_gpio_attr gpio_attr_##_name = {		\
+		.attr = __ATTR(_name, _mode, _show, _store),	\
+		.offset = _offset }
+
+static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+	struct solos_card *card = dev_get_drvdata(dev);
+	uint32_t data32;
+
+	if (count != 1 && (count != 2 || buf[1] != '\n'))
+		return -EINVAL;
+
+	spin_lock_irq(&card->param_queue_lock);
+	data32 = ioread32(card->config_regs + GPIO_STATUS);
+	if (buf[0] == '1') {
+		data32 |= 1 << gattr->offset;
+		iowrite32(data32, card->config_regs + GPIO_STATUS);
+	} else if (buf[0] == '0') {
+		data32 &= ~(1 << gattr->offset);
+		iowrite32(data32, card->config_regs + GPIO_STATUS);
+	} else {
+		count = -EINVAL;
+	}
+	spin_unlock_irq(&card->param_queue_lock);
+	return count;
+}
+
+static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+	struct solos_card *card = dev_get_drvdata(dev);
+	uint32_t data32;
+
+	data32 = ioread32(card->config_regs + GPIO_STATUS);
+	data32 = (data32 >> gattr->offset) & 1;
+
+	return sprintf(buf, "%d\n", data32);
+}
+
+static ssize_t hardware_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+	struct solos_card *card = dev_get_drvdata(dev);
+	uint32_t data32;
+
+	data32 = ioread32(card->config_regs + GPIO_STATUS);
+	switch (gattr->offset) {
+	case 0:
+		/* HardwareVersion */
+		data32 = data32 & 0x1F;
+		break;
+	case 1:
+		/* HardwareVariant */
+		data32 = (data32 >> 5) & 0x0F;
+		break;
+	}
+	return sprintf(buf, "%d\n", data32);
+}
+
+static DEVICE_ATTR_RW(console);
+
+
+#define SOLOS_ATTR_RO(x) static DEVICE_ATTR(x, 0444, solos_param_show, NULL);
+#define SOLOS_ATTR_RW(x) static DEVICE_ATTR(x, 0644, solos_param_show, solos_param_store);
+
+#include "solos-attrlist.c"
+
+static SOLOS_GPIO_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store, 9);
+static SOLOS_GPIO_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store, 10);
+static SOLOS_GPIO_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store, 11);
+static SOLOS_GPIO_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store, 12);
+static SOLOS_GPIO_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store, 13);
+static SOLOS_GPIO_ATTR(PushButton, 0444, geos_gpio_show, NULL, 14);
+static SOLOS_GPIO_ATTR(HardwareVersion, 0444, hardware_show, NULL, 0);
+static SOLOS_GPIO_ATTR(HardwareVariant, 0444, hardware_show, NULL, 1);
+#undef SOLOS_ATTR_RO
+#undef SOLOS_ATTR_RW
+
+#define SOLOS_ATTR_RO(x) &dev_attr_##x.attr,
+#define SOLOS_ATTR_RW(x) &dev_attr_##x.attr,
+
+static struct attribute *solos_attrs[] = {
+#include "solos-attrlist.c"
+	NULL
+};
+
+static const struct attribute_group solos_attr_group = {
+	.attrs = solos_attrs,
+	.name = "parameters",
+};
+
+static struct attribute *gpio_attrs[] = {
+	&gpio_attr_GPIO1.attr.attr,
+	&gpio_attr_GPIO2.attr.attr,
+	&gpio_attr_GPIO3.attr.attr,
+	&gpio_attr_GPIO4.attr.attr,
+	&gpio_attr_GPIO5.attr.attr,
+	&gpio_attr_PushButton.attr.attr,
+	&gpio_attr_HardwareVersion.attr.attr,
+	&gpio_attr_HardwareVariant.attr.attr,
+	NULL
+};
+
+static const struct attribute_group gpio_attr_group = {
+	.attrs = gpio_attrs,
+	.name = "gpio",
+};
+
+static int flash_upgrade(struct solos_card *card, int chip)
+{
+	const struct firmware *fw;
+	const char *fw_name;
+	int blocksize = 0;
+	int numblocks = 0;
+	int offset;
+
+	switch (chip) {
+	case 0:
+		fw_name = "solos-FPGA.bin";
+		if (card->atmel_flash)
+			blocksize = ATMEL_FPGA_BLOCK;
+		else
+			blocksize = SPI_FLASH_BLOCK;
+		break;
+	case 1:
+		fw_name = "solos-Firmware.bin";
+		if (card->atmel_flash)
+			blocksize = ATMEL_SOLOS_BLOCK;
+		else
+			blocksize = SPI_FLASH_BLOCK;
+		break;
+	case 2:
+		if (card->fpga_version > LEGACY_BUFFERS){
+			fw_name = "solos-db-FPGA.bin";
+			if (card->atmel_flash)
+				blocksize = ATMEL_FPGA_BLOCK;
+			else
+				blocksize = SPI_FLASH_BLOCK;
+		} else {
+			dev_info(&card->dev->dev, "FPGA version doesn't support"
+					" daughter board upgrades\n");
+			return -EPERM;
+		}
+		break;
+	case 3:
+		if (card->fpga_version > LEGACY_BUFFERS){
+			fw_name = "solos-Firmware.bin";
+			if (card->atmel_flash)
+				blocksize = ATMEL_SOLOS_BLOCK;
+			else
+				blocksize = SPI_FLASH_BLOCK;
+		} else {
+			dev_info(&card->dev->dev, "FPGA version doesn't support"
+					" daughter board upgrades\n");
+			return -EPERM;
+		}
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	if (request_firmware(&fw, fw_name, &card->dev->dev))
+		return -ENOENT;
+
+	dev_info(&card->dev->dev, "Flash upgrade starting\n");
+
+	/* New FPGAs require driver version before permitting flash upgrades */
+	iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
+
+	numblocks = fw->size / blocksize;
+	dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
+	dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
+	
+	dev_info(&card->dev->dev, "Changing FPGA to Update mode\n");
+	iowrite32(1, card->config_regs + FPGA_MODE);
+	(void) ioread32(card->config_regs + FPGA_MODE); 
+
+	/* Set mode to Chip Erase */
+	if(chip == 0 || chip == 2)
+		dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n");
+	if(chip == 1 || chip == 3)
+		dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n");
+	iowrite32((chip * 2), card->config_regs + FLASH_MODE);
+
+
+	iowrite32(1, card->config_regs + WRITE_FLASH);
+	wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
+
+	for (offset = 0; offset < fw->size; offset += blocksize) {
+		int i;
+
+		/* Clear write flag */
+		iowrite32(0, card->config_regs + WRITE_FLASH);
+
+		/* Set mode to Block Write */
+		/* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
+		iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
+
+		/* Copy block to buffer, swapping each 16 bits for Atmel flash */
+		for(i = 0; i < blocksize; i += 4) {
+			uint32_t word;
+			if (card->atmel_flash)
+				word = swahb32p((uint32_t *)(fw->data + offset + i));
+			else
+				word = *(uint32_t *)(fw->data + offset + i);
+			if(card->fpga_version > LEGACY_BUFFERS)
+				iowrite32(word, FLASH_BUF + i);
+			else
+				iowrite32(word, RX_BUF(card, 3) + i);
+		}
+
+		/* Specify block number and then trigger flash write */
+		iowrite32(offset / blocksize, card->config_regs + FLASH_BLOCK);
+		iowrite32(1, card->config_regs + WRITE_FLASH);
+		wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
+	}
+
+	release_firmware(fw);
+	iowrite32(0, card->config_regs + WRITE_FLASH);
+	iowrite32(0, card->config_regs + FPGA_MODE);
+	iowrite32(0, card->config_regs + FLASH_MODE);
+	dev_info(&card->dev->dev, "Returning FPGA to Data mode\n");
+	return 0;
+}
+
+static irqreturn_t solos_irq(int irq, void *dev_id)
+{
+	struct solos_card *card = dev_id;
+	int handled = 1;
+
+	iowrite32(0, card->config_regs + IRQ_CLEAR);
+
+	/* If we're up and running, just kick the tasklet to process TX/RX */
+	if (card->atmdev[0])
+		tasklet_schedule(&card->tlet);
+	else
+		wake_up(&card->fw_wq);
+
+	return IRQ_RETVAL(handled);
+}
+
+static void solos_bh(unsigned long card_arg)
+{
+	struct solos_card *card = (void *)card_arg;
+	uint32_t card_flags;
+	uint32_t rx_done = 0;
+	int port;
+
+	/*
+	 * Since fpga_tx() is going to need to read the flags under its lock,
+	 * it can return them to us so that we don't have to hit PCI MMIO
+	 * again for the same information
+	 */
+	card_flags = fpga_tx(card);
+
+	for (port = 0; port < card->nr_ports; port++) {
+		if (card_flags & (0x10 << port)) {
+			struct pkt_hdr _hdr, *header;
+			struct sk_buff *skb;
+			struct atm_vcc *vcc;
+			int size;
+
+			if (card->using_dma) {
+				skb = card->rx_skb[port];
+				card->rx_skb[port] = NULL;
+
+				dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
+						 RX_DMA_SIZE, DMA_FROM_DEVICE);
+
+				header = (void *)skb->data;
+				size = le16_to_cpu(header->size);
+				skb_put(skb, size + sizeof(*header));
+				skb_pull(skb, sizeof(*header));
+			} else {
+				header = &_hdr;
+
+				rx_done |= 0x10 << port;
+
+				memcpy_fromio(header, RX_BUF(card, port), sizeof(*header));
+
+				size = le16_to_cpu(header->size);
+				if (size > (card->buffer_size - sizeof(*header))){
+					dev_warn(&card->dev->dev, "Invalid buffer size\n");
+					continue;
+				}
+
+				/* Use netdev_alloc_skb() because it adds NET_SKB_PAD of
+				 * headroom, and ensures we can route packets back out an
+				 * Ethernet interface (for example) without having to
+				 * reallocate. Adding NET_IP_ALIGN also ensures that both
+				 * PPPoATM and PPPoEoBR2684 packets end up aligned. */
+				skb = netdev_alloc_skb_ip_align(NULL, size + 1);
+				if (!skb) {
+					if (net_ratelimit())
+						dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n");
+					continue;
+				}
+
+				memcpy_fromio(skb_put(skb, size),
+					      RX_BUF(card, port) + sizeof(*header),
+					      size);
+			}
+			if (atmdebug) {
+				dev_info(&card->dev->dev, "Received: port %d\n", port);
+				dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
+					 size, le16_to_cpu(header->vpi),
+					 le16_to_cpu(header->vci));
+				print_buffer(skb);
+			}
+
+			switch (le16_to_cpu(header->type)) {
+			case PKT_DATA:
+				vcc = find_vcc(card->atmdev[port], le16_to_cpu(header->vpi),
+					       le16_to_cpu(header->vci));
+				if (!vcc) {
+					if (net_ratelimit())
+						dev_warn(&card->dev->dev, "Received packet for unknown VPI.VCI %d.%d on port %d\n",
+							 le16_to_cpu(header->vpi), le16_to_cpu(header->vci),
+							 port);
+					dev_kfree_skb_any(skb);
+					break;
+				}
+				atm_charge(vcc, skb->truesize);
+				vcc->push(vcc, skb);
+				atomic_inc(&vcc->stats->rx);
+				break;
+
+			case PKT_STATUS:
+				if (process_status(card, port, skb) &&
+				    net_ratelimit()) {
+					dev_warn(&card->dev->dev, "Bad status packet of %d bytes on port %d:\n", skb->len, port);
+					print_buffer(skb);
+				}
+				dev_kfree_skb_any(skb);
+				break;
+
+			case PKT_COMMAND:
+			default: /* FIXME: Not really, surely? */
+				if (process_command(card, port, skb))
+					break;
+				spin_lock(&card->cli_queue_lock);
+				if (skb_queue_len(&card->cli_queue[port]) > 10) {
+					if (net_ratelimit())
+						dev_warn(&card->dev->dev, "Dropping console response on port %d\n",
+							 port);
+					dev_kfree_skb_any(skb);
+				} else
+					skb_queue_tail(&card->cli_queue[port], skb);
+				spin_unlock(&card->cli_queue_lock);
+				break;
+			}
+		}
+		/* Allocate RX skbs for any ports which need them */
+		if (card->using_dma && card->atmdev[port] &&
+		    !card->rx_skb[port]) {
+			/* Unlike the MMIO case (qv) we can't add NET_IP_ALIGN
+			 * here; the FPGA can only DMA to addresses which are
+			 * aligned to 4 bytes. */
+			struct sk_buff *skb = dev_alloc_skb(RX_DMA_SIZE);
+			if (skb) {
+				SKB_CB(skb)->dma_addr =
+					dma_map_single(&card->dev->dev, skb->data,
+						       RX_DMA_SIZE, DMA_FROM_DEVICE);
+				iowrite32(SKB_CB(skb)->dma_addr,
+					  card->config_regs + RX_DMA_ADDR(port));
+				card->rx_skb[port] = skb;
+			} else {
+				if (net_ratelimit())
+					dev_warn(&card->dev->dev, "Failed to allocate RX skb");
+
+				/* We'll have to try again later */
+				tasklet_schedule(&card->tlet);
+			}
+		}
+	}
+	if (rx_done)
+		iowrite32(rx_done, card->config_regs + FLAGS_ADDR);
+
+	return;
+}
+
+static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci)
+{
+	struct hlist_head *head;
+	struct atm_vcc *vcc = NULL;
+	struct sock *s;
+
+	read_lock(&vcc_sklist_lock);
+	head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
+	sk_for_each(s, head) {
+		vcc = atm_sk(s);
+		if (vcc->dev == dev && vcc->vci == vci &&
+		    vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE &&
+		    test_bit(ATM_VF_READY, &vcc->flags))
+			goto out;
+	}
+	vcc = NULL;
+ out:
+	read_unlock(&vcc_sklist_lock);
+	return vcc;
+}
+
+static int popen(struct atm_vcc *vcc)
+{
+	struct solos_card *card = vcc->dev->dev_data;
+	struct sk_buff *skb;
+	struct pkt_hdr *header;
+
+	if (vcc->qos.aal != ATM_AAL5) {
+		dev_warn(&card->dev->dev, "Unsupported ATM type %d\n",
+			 vcc->qos.aal);
+		return -EINVAL;
+	}
+
+	skb = alloc_skb(sizeof(*header), GFP_KERNEL);
+	if (!skb) {
+		if (net_ratelimit())
+			dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n");
+		return -ENOMEM;
+	}
+	header = skb_put(skb, sizeof(*header));
+
+	header->size = cpu_to_le16(0);
+	header->vpi = cpu_to_le16(vcc->vpi);
+	header->vci = cpu_to_le16(vcc->vci);
+	header->type = cpu_to_le16(PKT_POPEN);
+
+	fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
+
+	set_bit(ATM_VF_ADDR, &vcc->flags);
+	set_bit(ATM_VF_READY, &vcc->flags);
+
+	return 0;
+}
+
+static void pclose(struct atm_vcc *vcc)
+{
+	struct solos_card *card = vcc->dev->dev_data;
+	unsigned char port = SOLOS_CHAN(vcc->dev);
+	struct sk_buff *skb, *tmpskb;
+	struct pkt_hdr *header;
+
+	/* Remove any yet-to-be-transmitted packets from the pending queue */
+	spin_lock_bh(&card->tx_queue_lock);
+	skb_queue_walk_safe(&card->tx_queue[port], skb, tmpskb) {
+		if (SKB_CB(skb)->vcc == vcc) {
+			skb_unlink(skb, &card->tx_queue[port]);
+			solos_pop(vcc, skb);
+		}
+	}
+	spin_unlock_bh(&card->tx_queue_lock);
+
+	skb = alloc_skb(sizeof(*header), GFP_KERNEL);
+	if (!skb) {
+		dev_warn(&card->dev->dev, "Failed to allocate sk_buff in pclose()\n");
+		return;
+	}
+	header = skb_put(skb, sizeof(*header));
+
+	header->size = cpu_to_le16(0);
+	header->vpi = cpu_to_le16(vcc->vpi);
+	header->vci = cpu_to_le16(vcc->vci);
+	header->type = cpu_to_le16(PKT_PCLOSE);
+
+	skb_get(skb);
+	fpga_queue(card, port, skb, NULL);
+
+	if (!wait_event_timeout(card->param_wq, !skb_shared(skb), 5 * HZ))
+		dev_warn(&card->dev->dev,
+			 "Timeout waiting for VCC close on port %d\n", port);
+
+	dev_kfree_skb(skb);
+
+	/* Hold up vcc_destroy_socket() (our caller) until solos_bh() in the
+	   tasklet has finished processing any incoming packets (and, more to
+	   the point, using the vcc pointer). */
+	tasklet_unlock_wait(&card->tlet);
+
+	clear_bit(ATM_VF_ADDR, &vcc->flags);
+
+	return;
+}
+
+static int print_buffer(struct sk_buff *buf)
+{
+	int len,i;
+	char msg[500];
+	char item[10];
+
+	len = buf->len;
+	for (i = 0; i < len; i++){
+		if(i % 8 == 0)
+			sprintf(msg, "%02X: ", i);
+
+		sprintf(item,"%02X ",*(buf->data + i));
+		strcat(msg, item);
+		if(i % 8 == 7) {
+			sprintf(item, "\n");
+			strcat(msg, item);
+			printk(KERN_DEBUG "%s", msg);
+		}
+	}
+	if (i % 8 != 0) {
+		sprintf(item, "\n");
+		strcat(msg, item);
+		printk(KERN_DEBUG "%s", msg);
+	}
+	printk(KERN_DEBUG "\n");
+
+	return 0;
+}
+
+static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
+		       struct atm_vcc *vcc)
+{
+	int old_len;
+	unsigned long flags;
+
+	SKB_CB(skb)->vcc = vcc;
+
+	spin_lock_irqsave(&card->tx_queue_lock, flags);
+	old_len = skb_queue_len(&card->tx_queue[port]);
+	skb_queue_tail(&card->tx_queue[port], skb);
+	if (!old_len)
+		card->tx_mask |= (1 << port);
+	spin_unlock_irqrestore(&card->tx_queue_lock, flags);
+
+	/* Theoretically we could just schedule the tasklet here, but
+	   that introduces latency we don't want -- it's noticeable */
+	if (!old_len)
+		fpga_tx(card);
+}
+
+static uint32_t fpga_tx(struct solos_card *card)
+{
+	uint32_t tx_pending, card_flags;
+	uint32_t tx_started = 0;
+	struct sk_buff *skb;
+	struct atm_vcc *vcc;
+	unsigned char port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&card->tx_lock, flags);
+	
+	card_flags = ioread32(card->config_regs + FLAGS_ADDR);
+	/*
+	 * The queue lock is required for _writing_ to tx_mask, but we're
+	 * OK to read it here without locking. The only potential update
+	 * that we could race with is in fpga_queue() where it sets a bit
+	 * for a new port... but it's going to call this function again if
+	 * it's doing that, anyway.
+	 */
+	tx_pending = card->tx_mask & ~card_flags;
+
+	for (port = 0; tx_pending; tx_pending >>= 1, port++) {
+		if (tx_pending & 1) {
+			struct sk_buff *oldskb = card->tx_skb[port];
+			if (oldskb) {
+				dma_unmap_single(&card->dev->dev, SKB_CB(oldskb)->dma_addr,
+						 oldskb->len, DMA_TO_DEVICE);
+				card->tx_skb[port] = NULL;
+			}
+			spin_lock(&card->tx_queue_lock);
+			skb = skb_dequeue(&card->tx_queue[port]);
+			if (!skb)
+				card->tx_mask &= ~(1 << port);
+			spin_unlock(&card->tx_queue_lock);
+
+			if (skb && !card->using_dma) {
+				memcpy_toio(TX_BUF(card, port), skb->data, skb->len);
+				tx_started |= 1 << port;
+				oldskb = skb; /* We're done with this skb already */
+			} else if (skb && card->using_dma) {
+				unsigned char *data = skb->data;
+				if ((unsigned long)data & card->dma_alignment) {
+					data = card->dma_bounce + (BUF_SIZE * port);
+					memcpy(data, skb->data, skb->len);
+				}
+				SKB_CB(skb)->dma_addr = dma_map_single(&card->dev->dev, data,
+								       skb->len, DMA_TO_DEVICE);
+				card->tx_skb[port] = skb;
+				iowrite32(SKB_CB(skb)->dma_addr,
+					  card->config_regs + TX_DMA_ADDR(port));
+			}
+
+			if (!oldskb)
+				continue;
+
+			/* Clean up and free oldskb now it's gone */
+			if (atmdebug) {
+				struct pkt_hdr *header = (void *)oldskb->data;
+				int size = le16_to_cpu(header->size);
+
+				skb_pull(oldskb, sizeof(*header));
+				dev_info(&card->dev->dev, "Transmitted: port %d\n",
+					 port);
+				dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
+					 size, le16_to_cpu(header->vpi),
+					 le16_to_cpu(header->vci));
+				print_buffer(oldskb);
+			}
+
+			vcc = SKB_CB(oldskb)->vcc;
+
+			if (vcc) {
+				atomic_inc(&vcc->stats->tx);
+				solos_pop(vcc, oldskb);
+			} else {
+				dev_kfree_skb_irq(oldskb);
+				wake_up(&card->param_wq);
+			}
+		}
+	}
+	/* For non-DMA TX, write the 'TX start' bit for all four ports simultaneously */
+	if (tx_started)
+		iowrite32(tx_started, card->config_regs + FLAGS_ADDR);
+
+	spin_unlock_irqrestore(&card->tx_lock, flags);
+	return card_flags;
+}
+
+static int psend(struct atm_vcc *vcc, struct sk_buff *skb)
+{
+	struct solos_card *card = vcc->dev->dev_data;
+	struct pkt_hdr *header;
+	int pktlen;
+
+	pktlen = skb->len;
+	if (pktlen > (BUF_SIZE - sizeof(*header))) {
+		dev_warn(&card->dev->dev, "Length of PDU is too large. Dropping PDU.\n");
+		solos_pop(vcc, skb);
+		return 0;
+	}
+
+	if (!skb_clone_writable(skb, sizeof(*header))) {
+		int expand_by = 0;
+		int ret;
+
+		if (skb_headroom(skb) < sizeof(*header))
+			expand_by = sizeof(*header) - skb_headroom(skb);
+
+		ret = pskb_expand_head(skb, expand_by, 0, GFP_ATOMIC);
+		if (ret) {
+			dev_warn(&card->dev->dev, "pskb_expand_head failed.\n");
+			solos_pop(vcc, skb);
+			return ret;
+		}
+	}
+
+	header = skb_push(skb, sizeof(*header));
+
+	/* This does _not_ include the size of the header */
+	header->size = cpu_to_le16(pktlen);
+	header->vpi = cpu_to_le16(vcc->vpi);
+	header->vci = cpu_to_le16(vcc->vci);
+	header->type = cpu_to_le16(PKT_DATA);
+
+	fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, vcc);
+
+	return 0;
+}
+
+static const struct atmdev_ops fpga_ops = {
+	.open =		popen,
+	.close =	pclose,
+	.ioctl =	NULL,
+	.send =		psend,
+	.send_oam =	NULL,
+	.phy_put =	NULL,
+	.phy_get =	NULL,
+	.change_qos =	NULL,
+	.proc_read =	NULL,
+	.owner =	THIS_MODULE
+};
+
+static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int err;
+	uint16_t fpga_ver;
+	uint8_t major_ver, minor_ver;
+	uint32_t data32;
+	struct solos_card *card;
+
+	card = kzalloc(sizeof(*card), GFP_KERNEL);
+	if (!card)
+		return -ENOMEM;
+
+	card->dev = dev;
+	init_waitqueue_head(&card->fw_wq);
+	init_waitqueue_head(&card->param_wq);
+
+	err = pci_enable_device(dev);
+	if (err) {
+		dev_warn(&dev->dev,  "Failed to enable PCI device\n");
+		goto out;
+	}
+
+	err = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
+	if (err) {
+		dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
+		goto out;
+	}
+
+	err = pci_request_regions(dev, "solos");
+	if (err) {
+		dev_warn(&dev->dev, "Failed to request regions\n");
+		goto out;
+	}
+
+	card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE);
+	if (!card->config_regs) {
+		dev_warn(&dev->dev, "Failed to ioremap config registers\n");
+		err = -ENOMEM;
+		goto out_release_regions;
+	}
+	card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE);
+	if (!card->buffers) {
+		dev_warn(&dev->dev, "Failed to ioremap data buffers\n");
+		err = -ENOMEM;
+		goto out_unmap_config;
+	}
+
+	if (reset) {
+		iowrite32(1, card->config_regs + FPGA_MODE);
+		ioread32(card->config_regs + FPGA_MODE);
+
+		iowrite32(0, card->config_regs + FPGA_MODE);
+		ioread32(card->config_regs + FPGA_MODE);
+	}
+
+	data32 = ioread32(card->config_regs + FPGA_VER);
+	fpga_ver = (data32 & 0x0000FFFF);
+	major_ver = ((data32 & 0xFF000000) >> 24);
+	minor_ver = ((data32 & 0x00FF0000) >> 16);
+	card->fpga_version = FPGA_VERSION(major_ver,minor_ver);
+	if (card->fpga_version > LEGACY_BUFFERS)
+		card->buffer_size = BUF_SIZE;
+	else
+		card->buffer_size = OLD_BUF_SIZE;
+	dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
+		 major_ver, minor_ver, fpga_ver);
+
+	if (fpga_ver < 37 && (fpga_upgrade || firmware_upgrade ||
+			      db_fpga_upgrade || db_firmware_upgrade)) {
+		dev_warn(&dev->dev,
+			 "FPGA too old; cannot upgrade flash. Use JTAG.\n");
+		fpga_upgrade = firmware_upgrade = 0;
+		db_fpga_upgrade = db_firmware_upgrade = 0;
+	}
+
+	/* Stopped using Atmel flash after 0.03-38 */
+	if (fpga_ver < 39)
+		card->atmel_flash = 1;
+	else
+		card->atmel_flash = 0;
+
+	data32 = ioread32(card->config_regs + PORTS);
+	card->nr_ports = (data32 & 0x000000FF);
+
+	if (card->fpga_version >= DMA_SUPPORTED) {
+		pci_set_master(dev);
+		card->using_dma = 1;
+		if (1) { /* All known FPGA versions so far */
+			card->dma_alignment = 3;
+			card->dma_bounce = kmalloc_array(card->nr_ports,
+							 BUF_SIZE, GFP_KERNEL);
+			if (!card->dma_bounce) {
+				dev_warn(&card->dev->dev, "Failed to allocate DMA bounce buffers\n");
+				err = -ENOMEM;
+				/* Fallback to MMIO doesn't work */
+				goto out_unmap_both;
+			}
+		}
+	} else {
+		card->using_dma = 0;
+		/* Set RX empty flag for all ports */
+		iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
+	}
+
+	pci_set_drvdata(dev, card);
+
+	tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
+	spin_lock_init(&card->tx_lock);
+	spin_lock_init(&card->tx_queue_lock);
+	spin_lock_init(&card->cli_queue_lock);
+	spin_lock_init(&card->param_queue_lock);
+	INIT_LIST_HEAD(&card->param_queue);
+
+	err = request_irq(dev->irq, solos_irq, IRQF_SHARED,
+			  "solos-pci", card);
+	if (err) {
+		dev_dbg(&card->dev->dev, "Failed to request interrupt IRQ: %d\n", dev->irq);
+		goto out_unmap_both;
+	}
+
+	iowrite32(1, card->config_regs + IRQ_EN_ADDR);
+
+	if (fpga_upgrade)
+		flash_upgrade(card, 0);
+
+	if (firmware_upgrade)
+		flash_upgrade(card, 1);
+
+	if (db_fpga_upgrade)
+		flash_upgrade(card, 2);
+
+	if (db_firmware_upgrade)
+		flash_upgrade(card, 3);
+
+	err = atm_init(card, &dev->dev);
+	if (err)
+		goto out_free_irq;
+
+	if (card->fpga_version >= DMA_SUPPORTED &&
+	    sysfs_create_group(&card->dev->dev.kobj, &gpio_attr_group))
+		dev_err(&card->dev->dev, "Could not register parameter group for GPIOs\n");
+
+	return 0;
+
+ out_free_irq:
+	iowrite32(0, card->config_regs + IRQ_EN_ADDR);
+	free_irq(dev->irq, card);
+	tasklet_kill(&card->tlet);
+	
+ out_unmap_both:
+	kfree(card->dma_bounce);
+	pci_iounmap(dev, card->buffers);
+ out_unmap_config:
+	pci_iounmap(dev, card->config_regs);
+ out_release_regions:
+	pci_release_regions(dev);
+ out:
+	kfree(card);
+	return err;
+}
+
+static int atm_init(struct solos_card *card, struct device *parent)
+{
+	int i;
+
+	for (i = 0; i < card->nr_ports; i++) {
+		struct sk_buff *skb;
+		struct pkt_hdr *header;
+
+		skb_queue_head_init(&card->tx_queue[i]);
+		skb_queue_head_init(&card->cli_queue[i]);
+
+		card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
+		if (!card->atmdev[i]) {
+			dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
+			atm_remove(card);
+			return -ENODEV;
+		}
+		if (device_create_file(&card->atmdev[i]->class_dev, &dev_attr_console))
+			dev_err(&card->dev->dev, "Could not register console for ATM device %d\n", i);
+		if (sysfs_create_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group))
+			dev_err(&card->dev->dev, "Could not register parameter group for ATM device %d\n", i);
+
+		dev_info(&card->dev->dev, "Registered ATM device %d\n", card->atmdev[i]->number);
+
+		card->atmdev[i]->ci_range.vpi_bits = 8;
+		card->atmdev[i]->ci_range.vci_bits = 16;
+		card->atmdev[i]->dev_data = card;
+		card->atmdev[i]->phy_data = (void *)(unsigned long)i;
+		atm_dev_signal_change(card->atmdev[i], ATM_PHY_SIG_FOUND);
+
+		skb = alloc_skb(sizeof(*header), GFP_KERNEL);
+		if (!skb) {
+			dev_warn(&card->dev->dev, "Failed to allocate sk_buff in atm_init()\n");
+			continue;
+		}
+
+		header = skb_put(skb, sizeof(*header));
+
+		header->size = cpu_to_le16(0);
+		header->vpi = cpu_to_le16(0);
+		header->vci = cpu_to_le16(0);
+		header->type = cpu_to_le16(PKT_STATUS);
+
+		fpga_queue(card, i, skb, NULL);
+	}
+	return 0;
+}
+
+static void atm_remove(struct solos_card *card)
+{
+	int i;
+
+	for (i = 0; i < card->nr_ports; i++) {
+		if (card->atmdev[i]) {
+			struct sk_buff *skb;
+
+			dev_info(&card->dev->dev, "Unregistering ATM device %d\n", card->atmdev[i]->number);
+
+			sysfs_remove_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group);
+			atm_dev_deregister(card->atmdev[i]);
+
+			skb = card->rx_skb[i];
+			if (skb) {
+				dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
+						 RX_DMA_SIZE, DMA_FROM_DEVICE);
+				dev_kfree_skb(skb);
+			}
+			skb = card->tx_skb[i];
+			if (skb) {
+				dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
+						 skb->len, DMA_TO_DEVICE);
+				dev_kfree_skb(skb);
+			}
+			while ((skb = skb_dequeue(&card->tx_queue[i])))
+				dev_kfree_skb(skb);
+ 
+		}
+	}
+}
+
+static void fpga_remove(struct pci_dev *dev)
+{
+	struct solos_card *card = pci_get_drvdata(dev);
+	
+	/* Disable IRQs */
+	iowrite32(0, card->config_regs + IRQ_EN_ADDR);
+
+	/* Reset FPGA */
+	iowrite32(1, card->config_regs + FPGA_MODE);
+	(void)ioread32(card->config_regs + FPGA_MODE); 
+
+	if (card->fpga_version >= DMA_SUPPORTED)
+		sysfs_remove_group(&card->dev->dev.kobj, &gpio_attr_group);
+
+	atm_remove(card);
+
+	free_irq(dev->irq, card);
+	tasklet_kill(&card->tlet);
+
+	kfree(card->dma_bounce);
+
+	/* Release device from reset */
+	iowrite32(0, card->config_regs + FPGA_MODE);
+	(void)ioread32(card->config_regs + FPGA_MODE); 
+
+	pci_iounmap(dev, card->buffers);
+	pci_iounmap(dev, card->config_regs);
+
+	pci_release_regions(dev);
+	pci_disable_device(dev);
+
+	kfree(card);
+}
+
+static const struct pci_device_id fpga_pci_tbl[] = {
+	{ 0x10ee, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci,fpga_pci_tbl);
+
+static struct pci_driver fpga_driver = {
+	.name =		"solos",
+	.id_table =	fpga_pci_tbl,
+	.probe =	fpga_probe,
+	.remove =	fpga_remove,
+};
+
+
+static int __init solos_pci_init(void)
+{
+	BUILD_BUG_ON(sizeof(struct solos_skb_cb) > sizeof(((struct sk_buff *)0)->cb));
+
+	printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION);
+	return pci_register_driver(&fpga_driver);
+}
+
+static void __exit solos_pci_exit(void)
+{
+	pci_unregister_driver(&fpga_driver);
+	printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION);
+}
+
+module_init(solos_pci_init);
+module_exit(solos_pci_exit);