Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

47 files changed, 34719 insertions, 0 deletions

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
new file mode 100644
index 000000000..e30707405
--- /dev/null
+++ b/drivers/bluetooth/Kconfig
@@ -0,0 +1,445 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "Bluetooth device drivers"
+	depends on BT
+
+config BT_INTEL
+	tristate
+	select REGMAP
+
+config BT_BCM
+	tristate
+	select FW_LOADER
+
+config BT_RTL
+	tristate
+	select FW_LOADER
+
+config BT_QCA
+	tristate
+	select FW_LOADER
+
+config BT_MTK
+	tristate
+	select FW_LOADER
+
+config BT_HCIBTUSB
+	tristate "HCI USB driver"
+	depends on USB
+	select BT_INTEL
+	help
+	  Bluetooth HCI USB driver.
+	  This driver is required if you want to use Bluetooth devices with
+	  USB interface.
+
+	  Say Y here to compile support for Bluetooth USB devices into the
+	  kernel or say M to compile it as module (btusb).
+
+config BT_HCIBTUSB_AUTOSUSPEND
+	bool "Enable USB autosuspend for Bluetooth USB devices by default"
+	depends on BT_HCIBTUSB
+	help
+	  Say Y here to enable USB autosuspend for Bluetooth USB devices by
+	  default.
+
+	  This can be overridden by passing btusb.enable_autosuspend=[y|n]
+	  on the kernel commandline.
+
+config BT_HCIBTUSB_BCM
+	bool "Broadcom protocol support"
+	depends on BT_HCIBTUSB
+	select BT_BCM
+	default y
+	help
+	  The Broadcom protocol support enables firmware and patchram
+	  download support for Broadcom Bluetooth controllers.
+
+	  Say Y here to compile support for Broadcom protocol.
+
+config BT_HCIBTUSB_MTK
+	bool "MediaTek protocol support"
+	depends on BT_HCIBTUSB
+	select BT_MTK
+	default n
+	help
+	  The MediaTek protocol support enables firmware download
+	  support and chip initialization for MediaTek Bluetooth
+	  USB controllers.
+
+	  Say Y here to compile support for MediaTek protocol.
+
+config BT_HCIBTUSB_RTL
+	bool "Realtek protocol support"
+	depends on BT_HCIBTUSB
+	select BT_RTL
+	default y
+	help
+	  The Realtek protocol support enables firmware and configuration
+	  download support for Realtek Bluetooth controllers.
+
+	  Say Y here to compile support for Realtek protocol.
+
+config BT_HCIBTSDIO
+	tristate "HCI SDIO driver"
+	depends on MMC
+	help
+	  Bluetooth HCI SDIO driver.
+	  This driver is required if you want to use Bluetooth device with
+	  SDIO interface.
+
+	  Say Y here to compile support for Bluetooth SDIO devices into the
+	  kernel or say M to compile it as module (btsdio).
+
+config BT_HCIUART
+	tristate "HCI UART driver"
+	depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
+	depends on NVMEM || !NVMEM
+	depends on TTY
+	help
+	  Bluetooth HCI UART driver.
+	  This driver is required if you want to use Bluetooth devices with
+	  serial port interface. You will also need this driver if you have
+	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
+	  adapter and BrainBoxes Bluetooth PC Card.
+
+	  Say Y here to compile support for Bluetooth UART devices into the
+	  kernel or say M to compile it as module (hci_uart).
+
+config BT_HCIUART_SERDEV
+	bool
+	depends on SERIAL_DEV_BUS && BT_HCIUART
+	default y
+
+config BT_HCIUART_H4
+	bool "UART (H4) protocol support"
+	depends on BT_HCIUART
+	help
+	  UART (H4) is serial protocol for communication between Bluetooth
+	  device and host. This protocol is required for most Bluetooth devices
+	  with UART interface, including PCMCIA and CF cards.
+
+	  Say Y here to compile support for HCI UART (H4) protocol.
+
+config BT_HCIUART_NOKIA
+	tristate "UART Nokia H4+ protocol support"
+	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
+	depends on GPIOLIB
+	depends on PM
+	select BT_HCIUART_H4
+	select BT_BCM
+	help
+	  Nokia H4+ is serial protocol for communication between Bluetooth
+	  device and host. This protocol is required for Bluetooth devices
+	  with UART interface in Nokia devices.
+
+	  Say Y here to compile support for Nokia's H4+ protocol.
+
+config BT_HCIUART_BCSP
+	bool "BCSP protocol support"
+	depends on BT_HCIUART
+	select BITREVERSE
+	help
+	  BCSP (BlueCore Serial Protocol) is serial protocol for communication
+	  between Bluetooth device and host. This protocol is required for non
+	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
+	  CF cards.
+
+	  Say Y here to compile support for HCI BCSP protocol.
+
+config BT_HCIUART_ATH3K
+	bool "Atheros AR300x serial support"
+	depends on BT_HCIUART
+	select BT_HCIUART_H4
+	help
+	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
+	  communication between host and Atheros AR300x Bluetooth devices.
+	  This protocol enables AR300x chips to be enabled with
+	  power management support.
+	  Enable this if you have Atheros AR300x serial Bluetooth device.
+
+	  Say Y here to compile support for HCI UART ATH3K protocol.
+
+config BT_HCIUART_LL
+	bool "HCILL protocol support"
+	depends on BT_HCIUART_SERDEV
+	select BT_HCIUART_H4
+	help
+	  HCILL (HCI Low Level) is a serial protocol for communication
+	  between Bluetooth device and host. This protocol is required for
+	  serial Bluetooth devices that are based on Texas Instruments'
+	  BRF chips.
+
+	  Say Y here to compile support for HCILL protocol.
+
+config BT_HCIUART_3WIRE
+	bool "Three-wire UART (H5) protocol support"
+	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
+	help
+	  The HCI Three-wire UART Transport Layer makes it possible to
+	  user the Bluetooth HCI over a serial port interface. The HCI
+	  Three-wire UART Transport Layer assumes that the UART
+	  communication may have bit errors, overrun errors or burst
+	  errors and thereby making CTS/RTS lines unnecessary.
+
+	  Say Y here to compile support for Three-wire UART protocol.
+
+config BT_HCIUART_INTEL
+	bool "Intel protocol support"
+	depends on BT_HCIUART
+	depends on GPIOLIB
+	select BT_HCIUART_H4
+	select BT_INTEL
+	help
+	  The Intel protocol support enables Bluetooth HCI over serial
+	  port interface for Intel Bluetooth controllers.
+
+	  Say Y here to compile support for Intel protocol.
+
+config BT_HCIUART_BCM
+	bool "Broadcom protocol support"
+	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
+	depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
+	depends on GPIOLIB
+	select BT_HCIUART_H4
+	select BT_BCM
+	help
+	  The Broadcom protocol support enables Bluetooth HCI over serial
+	  port interface for Broadcom Bluetooth controllers.
+
+	  Say Y here to compile support for Broadcom protocol.
+
+config BT_HCIUART_RTL
+	bool "Realtek protocol support"
+	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
+	depends on GPIOLIB
+	depends on (ACPI || SERIAL_DEV_CTRL_TTYPORT)
+	select BT_HCIUART_3WIRE
+	select BT_RTL
+	help
+	  The Realtek protocol support enables Bluetooth HCI over 3-Wire
+	  serial port interface for Realtek Bluetooth controllers.
+
+	  Say Y here to compile support for Realtek protocol.
+
+config BT_HCIUART_QCA
+	bool "Qualcomm Atheros protocol support"
+	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
+	select BT_HCIUART_H4
+	select BT_QCA
+	help
+	  The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
+	  over serial port interface(H4) between controller and host.
+	  This protocol is required for UART clock control for QCA Bluetooth
+	  devices.
+
+	  Say Y here to compile support for QCA protocol.
+
+config BT_HCIUART_AG6XX
+	bool "Intel AG6XX protocol support"
+	depends on BT_HCIUART
+	select BT_HCIUART_H4
+	select BT_INTEL
+	help
+	  The Intel/AG6XX protocol support enables Bluetooth HCI over serial
+	  port interface for Intel ibt 2.1 Bluetooth controllers.
+
+	  Say Y here to compile support for Intel AG6XX protocol.
+
+config BT_HCIUART_MRVL
+	bool "Marvell protocol support"
+	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
+	select BT_HCIUART_H4
+	help
+	  Marvell is serial protocol for communication between Bluetooth
+	  device and host. This protocol is required for most Marvell Bluetooth
+	  devices with UART interface.
+
+	  Say Y here to compile support for HCI MRVL protocol.
+
+config BT_HCIBCM203X
+	tristate "HCI BCM203x USB driver"
+	depends on USB
+	select FW_LOADER
+	help
+	  Bluetooth HCI BCM203x USB driver.
+	  This driver provides the firmware loading mechanism for the Broadcom
+	  Blutonium based devices.
+
+	  Say Y here to compile support for HCI BCM203x devices into the
+	  kernel or say M to compile it as module (bcm203x).
+
+config BT_HCIBPA10X
+	tristate "HCI BPA10x USB driver"
+	depends on USB
+	help
+	  Bluetooth HCI BPA10x USB driver.
+	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
+	  sniffer devices.
+
+	  Say Y here to compile support for HCI BPA10x devices into the
+	  kernel or say M to compile it as module (bpa10x).
+
+config BT_HCIBFUSB
+	tristate "HCI BlueFRITZ! USB driver"
+	depends on USB
+	select FW_LOADER
+	help
+	  Bluetooth HCI BlueFRITZ! USB driver.
+	  This driver provides support for Bluetooth USB devices with AVM
+	  interface:
+	     AVM BlueFRITZ! USB
+
+	  Say Y here to compile support for HCI BFUSB devices into the
+	  kernel or say M to compile it as module (bfusb).
+
+config BT_HCIDTL1
+	tristate "HCI DTL1 (PC Card) driver"
+	depends on PCMCIA
+	help
+	  Bluetooth HCI DTL1 (PC Card) driver.
+	  This driver provides support for Bluetooth PCMCIA devices with
+	  Nokia DTL1 interface:
+	     Nokia Bluetooth Card
+	     Socket Bluetooth CF Card
+
+	  Say Y here to compile support for HCI DTL1 devices into the
+	  kernel or say M to compile it as module (dtl1_cs).
+
+config BT_HCIBT3C
+	tristate "HCI BT3C (PC Card) driver"
+	depends on PCMCIA
+	select FW_LOADER
+	help
+	  Bluetooth HCI BT3C (PC Card) driver.
+	  This driver provides support for Bluetooth PCMCIA devices with
+	  3Com BT3C interface:
+	     3Com Bluetooth Card (3CRWB6096)
+	     HP Bluetooth Card
+
+	  Say Y here to compile support for HCI BT3C devices into the
+	  kernel or say M to compile it as module (bt3c_cs).
+
+config BT_HCIBLUECARD
+	tristate "HCI BlueCard (PC Card) driver"
+	depends on PCMCIA
+	help
+	  Bluetooth HCI BlueCard (PC Card) driver.
+	  This driver provides support for Bluetooth PCMCIA devices with
+	  Anycom BlueCard interface:
+	     Anycom Bluetooth PC Card
+	     Anycom Bluetooth CF Card
+
+	  Say Y here to compile support for HCI BlueCard devices into the
+	  kernel or say M to compile it as module (bluecard_cs).
+
+config BT_HCIVHCI
+	tristate "HCI VHCI (Virtual HCI device) driver"
+	help
+	  Bluetooth Virtual HCI device driver.
+	  This driver is required if you want to use HCI Emulation software.
+
+	  Say Y here to compile support for virtual HCI devices into the
+	  kernel or say M to compile it as module (hci_vhci).
+
+config BT_MRVL
+	tristate "Marvell Bluetooth driver support"
+	help
+	  The core driver to support Marvell Bluetooth devices.
+
+	  This driver is required if you want to support
+	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.
+
+	  Say Y here to compile Marvell Bluetooth driver
+	  into the kernel or say M to compile it as module.
+
+config BT_MRVL_SDIO
+	tristate "Marvell BT-over-SDIO driver"
+	depends on BT_MRVL && MMC
+	select FW_LOADER
+	select WANT_DEV_COREDUMP
+	help
+	  The driver for Marvell Bluetooth chipsets with SDIO interface.
+
+	  This driver is required if you want to use Marvell Bluetooth
+	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
+	  chipsets are supported.
+
+	  Say Y here to compile support for Marvell BT-over-SDIO driver
+	  into the kernel or say M to compile it as module.
+
+config BT_ATH3K
+	tristate "Atheros firmware download driver"
+	depends on BT_HCIBTUSB
+	select FW_LOADER
+	help
+	  Bluetooth firmware download driver.
+	  This driver loads the firmware into the Atheros Bluetooth
+	  chipset.
+
+	  Say Y here to compile support for "Atheros firmware download driver"
+	  into the kernel or say M to compile it as module (ath3k).
+
+config BT_MTKSDIO
+	tristate "MediaTek HCI SDIO driver"
+	depends on MMC
+	select BT_MTK
+	help
+	  MediaTek Bluetooth HCI SDIO driver.
+	  This driver is required if you want to use MediaTek Bluetooth
+	  with SDIO interface.
+
+	  Say Y here to compile support for MediaTek Bluetooth SDIO devices
+	  into the kernel or say M to compile it as module (btmtksdio).
+
+config BT_MTKUART
+	tristate "MediaTek HCI UART driver"
+	depends on SERIAL_DEV_BUS
+	select BT_MTK
+	help
+	  MediaTek Bluetooth HCI UART driver.
+	  This driver is required if you want to use MediaTek Bluetooth
+	  with serial interface.
+
+	  Say Y here to compile support for MediaTek Bluetooth UART devices
+	  into the kernel or say M to compile it as module (btmtkuart).
+
+config BT_QCOMSMD
+	tristate "Qualcomm SMD based HCI support"
+	depends on RPMSG || (COMPILE_TEST && RPMSG=n)
+	depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
+	select BT_QCA
+	help
+	  Qualcomm SMD based HCI driver.
+	  This driver is used to bridge HCI data onto the shared memory
+	  channels to the WCNSS core.
+
+	  Say Y here to compile support for HCI over Qualcomm SMD into the
+	  kernel or say M to compile as a module.
+
+config BT_HCIRSI
+	tristate
+	help
+	  Redpine BT driver.
+	  This driver handles BT traffic from upper layers and pass
+	  to the RSI_91x coex module for further scheduling to device
+
+	  Say Y here to compile support for HCI over Redpine into the
+	  kernel or say M to compile as a module.
+
+config BT_VIRTIO
+	tristate "Virtio Bluetooth driver"
+	depends on VIRTIO
+	help
+	  Virtio Bluetooth support driver.
+	  This driver supports Virtio Bluetooth devices.
+
+	  Say Y here to compile support for HCI over Virtio into the
+	  kernel or say M to compile as a module.
+
+endmenu
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
new file mode 100644
index 000000000..3321a8aea
--- /dev/null
+++ b/drivers/bluetooth/Makefile
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Linux Bluetooth HCI device drivers.
+#
+
+obj-$(CONFIG_BT_HCIVHCI)	+= hci_vhci.o
+obj-$(CONFIG_BT_HCIUART)	+= hci_uart.o
+obj-$(CONFIG_BT_HCIBCM203X)	+= bcm203x.o
+obj-$(CONFIG_BT_HCIBPA10X)	+= bpa10x.o
+obj-$(CONFIG_BT_HCIBFUSB)	+= bfusb.o
+obj-$(CONFIG_BT_HCIDTL1)	+= dtl1_cs.o
+obj-$(CONFIG_BT_HCIBT3C)	+= bt3c_cs.o
+obj-$(CONFIG_BT_HCIBLUECARD)	+= bluecard_cs.o
+
+obj-$(CONFIG_BT_HCIBTUSB)	+= btusb.o
+obj-$(CONFIG_BT_HCIBTSDIO)	+= btsdio.o
+
+obj-$(CONFIG_BT_INTEL)		+= btintel.o
+obj-$(CONFIG_BT_ATH3K)		+= ath3k.o
+obj-$(CONFIG_BT_MRVL)		+= btmrvl.o
+obj-$(CONFIG_BT_MRVL_SDIO)	+= btmrvl_sdio.o
+obj-$(CONFIG_BT_MTKSDIO)	+= btmtksdio.o
+obj-$(CONFIG_BT_MTKUART)	+= btmtkuart.o
+obj-$(CONFIG_BT_QCOMSMD)	+= btqcomsmd.o
+obj-$(CONFIG_BT_BCM)		+= btbcm.o
+obj-$(CONFIG_BT_RTL)		+= btrtl.o
+obj-$(CONFIG_BT_QCA)		+= btqca.o
+obj-$(CONFIG_BT_MTK)		+= btmtk.o
+
+obj-$(CONFIG_BT_VIRTIO)		+= virtio_bt.o
+
+obj-$(CONFIG_BT_HCIUART_NOKIA)	+= hci_nokia.o
+
+obj-$(CONFIG_BT_HCIRSI)		+= btrsi.o
+
+btmrvl-y			:= btmrvl_main.o
+btmrvl-$(CONFIG_DEBUG_FS)	+= btmrvl_debugfs.o
+
+hci_uart-y				:= hci_ldisc.o
+hci_uart-$(CONFIG_BT_HCIUART_SERDEV)	+= hci_serdev.o
+hci_uart-$(CONFIG_BT_HCIUART_H4)	+= hci_h4.o
+hci_uart-$(CONFIG_BT_HCIUART_BCSP)	+= hci_bcsp.o
+hci_uart-$(CONFIG_BT_HCIUART_LL)	+= hci_ll.o
+hci_uart-$(CONFIG_BT_HCIUART_ATH3K)	+= hci_ath.o
+hci_uart-$(CONFIG_BT_HCIUART_3WIRE)	+= hci_h5.o
+hci_uart-$(CONFIG_BT_HCIUART_INTEL)	+= hci_intel.o
+hci_uart-$(CONFIG_BT_HCIUART_BCM)	+= hci_bcm.o
+hci_uart-$(CONFIG_BT_HCIUART_QCA)	+= hci_qca.o
+hci_uart-$(CONFIG_BT_HCIUART_AG6XX)	+= hci_ag6xx.o
+hci_uart-$(CONFIG_BT_HCIUART_MRVL)	+= hci_mrvl.o
+hci_uart-objs				:= $(hci_uart-y)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
new file mode 100644
index 000000000..88262d3a9
--- /dev/null
+++ b/drivers/bluetooth/ath3k.c
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ */
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/firmware.h>
+#include <linux/usb.h>
+#include <asm/unaligned.h>
+#include <net/bluetooth/bluetooth.h>
+
+#define VERSION "1.0"
+#define ATH3K_FIRMWARE	"ath3k-1.fw"
+
+#define ATH3K_DNLOAD				0x01
+#define ATH3K_GETSTATE				0x05
+#define ATH3K_SET_NORMAL_MODE			0x07
+#define ATH3K_GETVERSION			0x09
+#define USB_REG_SWITCH_VID_PID			0x0a
+
+#define ATH3K_MODE_MASK				0x3F
+#define ATH3K_NORMAL_MODE			0x0E
+
+#define ATH3K_PATCH_UPDATE			0x80
+#define ATH3K_SYSCFG_UPDATE			0x40
+
+#define ATH3K_XTAL_FREQ_26M			0x00
+#define ATH3K_XTAL_FREQ_40M			0x01
+#define ATH3K_XTAL_FREQ_19P2			0x02
+#define ATH3K_NAME_LEN				0xFF
+
+struct ath3k_version {
+	__le32	rom_version;
+	__le32	build_version;
+	__le32	ram_version;
+	__u8	ref_clock;
+	__u8	reserved[7];
+} __packed;
+
+static const struct usb_device_id ath3k_table[] = {
+	/* Atheros AR3011 */
+	{ USB_DEVICE(0x0CF3, 0x3000) },
+
+	/* Atheros AR3011 with sflash firmware*/
+	{ USB_DEVICE(0x0489, 0xE027) },
+	{ USB_DEVICE(0x0489, 0xE03D) },
+	{ USB_DEVICE(0x04F2, 0xAFF1) },
+	{ USB_DEVICE(0x0930, 0x0215) },
+	{ USB_DEVICE(0x0CF3, 0x3002) },
+	{ USB_DEVICE(0x0CF3, 0xE019) },
+	{ USB_DEVICE(0x13d3, 0x3304) },
+
+	/* Atheros AR9285 Malbec with sflash firmware */
+	{ USB_DEVICE(0x03F0, 0x311D) },
+
+	/* Atheros AR3012 with sflash firmware*/
+	{ USB_DEVICE(0x0489, 0xe04d) },
+	{ USB_DEVICE(0x0489, 0xe04e) },
+	{ USB_DEVICE(0x0489, 0xe057) },
+	{ USB_DEVICE(0x0489, 0xe056) },
+	{ USB_DEVICE(0x0489, 0xe05f) },
+	{ USB_DEVICE(0x0489, 0xe076) },
+	{ USB_DEVICE(0x0489, 0xe078) },
+	{ USB_DEVICE(0x0489, 0xe095) },
+	{ USB_DEVICE(0x04c5, 0x1330) },
+	{ USB_DEVICE(0x04CA, 0x3004) },
+	{ USB_DEVICE(0x04CA, 0x3005) },
+	{ USB_DEVICE(0x04CA, 0x3006) },
+	{ USB_DEVICE(0x04CA, 0x3007) },
+	{ USB_DEVICE(0x04CA, 0x3008) },
+	{ USB_DEVICE(0x04CA, 0x300b) },
+	{ USB_DEVICE(0x04CA, 0x300d) },
+	{ USB_DEVICE(0x04CA, 0x300f) },
+	{ USB_DEVICE(0x04CA, 0x3010) },
+	{ USB_DEVICE(0x04CA, 0x3014) },
+	{ USB_DEVICE(0x04CA, 0x3018) },
+	{ USB_DEVICE(0x0930, 0x0219) },
+	{ USB_DEVICE(0x0930, 0x021c) },
+	{ USB_DEVICE(0x0930, 0x0220) },
+	{ USB_DEVICE(0x0930, 0x0227) },
+	{ USB_DEVICE(0x0b05, 0x17d0) },
+	{ USB_DEVICE(0x0CF3, 0x0036) },
+	{ USB_DEVICE(0x0CF3, 0x3004) },
+	{ USB_DEVICE(0x0CF3, 0x3008) },
+	{ USB_DEVICE(0x0CF3, 0x311D) },
+	{ USB_DEVICE(0x0CF3, 0x311E) },
+	{ USB_DEVICE(0x0CF3, 0x311F) },
+	{ USB_DEVICE(0x0cf3, 0x3121) },
+	{ USB_DEVICE(0x0CF3, 0x817a) },
+	{ USB_DEVICE(0x0CF3, 0x817b) },
+	{ USB_DEVICE(0x0cf3, 0xe003) },
+	{ USB_DEVICE(0x0CF3, 0xE004) },
+	{ USB_DEVICE(0x0CF3, 0xE005) },
+	{ USB_DEVICE(0x0CF3, 0xE006) },
+	{ USB_DEVICE(0x13d3, 0x3362) },
+	{ USB_DEVICE(0x13d3, 0x3375) },
+	{ USB_DEVICE(0x13d3, 0x3393) },
+	{ USB_DEVICE(0x13d3, 0x3395) },
+	{ USB_DEVICE(0x13d3, 0x3402) },
+	{ USB_DEVICE(0x13d3, 0x3408) },
+	{ USB_DEVICE(0x13d3, 0x3423) },
+	{ USB_DEVICE(0x13d3, 0x3432) },
+	{ USB_DEVICE(0x13d3, 0x3472) },
+	{ USB_DEVICE(0x13d3, 0x3474) },
+	{ USB_DEVICE(0x13d3, 0x3487) },
+	{ USB_DEVICE(0x13d3, 0x3490) },
+
+	/* Atheros AR5BBU12 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xE02C) },
+
+	/* Atheros AR5BBU22 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xE036) },
+	{ USB_DEVICE(0x0489, 0xE03C) },
+
+	{ }	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ath3k_table);
+
+#define BTUSB_ATH3012		0x80
+/* This table is to load patch and sysconfig files
+ * for AR3012
+ */
+static const struct usb_device_id ath3k_blist_tbl[] = {
+
+	/* Atheros AR3012 with sflash firmware*/
+	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe095), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x311F), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0CF3, 0x817b), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3395), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 },
+
+	/* Atheros AR5BBU22 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
+
+	{ }	/* Terminating entry */
+};
+
+static inline void ath3k_log_failed_loading(int err, int len, int size,
+					    int count)
+{
+	BT_ERR("Firmware loading err = %d, len = %d, size = %d, count = %d",
+	       err, len, size, count);
+}
+
+#define USB_REQ_DFU_DNLOAD	1
+#define BULK_SIZE		4096
+#define FW_HDR_SIZE		20
+#define TIMEGAP_USEC_MIN	50
+#define TIMEGAP_USEC_MAX	100
+
+static int ath3k_load_firmware(struct usb_device *udev,
+				const struct firmware *firmware)
+{
+	u8 *send_buf;
+	int len = 0;
+	int err, pipe, size, sent = 0;
+	int count = firmware->size;
+
+	BT_DBG("udev %p", udev);
+
+	send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
+	if (!send_buf) {
+		BT_ERR("Can't allocate memory chunk for firmware");
+		return -ENOMEM;
+	}
+
+	err = usb_control_msg_send(udev, 0, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR,
+				   0, 0, firmware->data, FW_HDR_SIZE,
+				   USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
+	if (err) {
+		BT_ERR("Can't change to loading configuration err");
+		goto error;
+	}
+	sent += FW_HDR_SIZE;
+	count -= FW_HDR_SIZE;
+
+	pipe = usb_sndbulkpipe(udev, 0x02);
+
+	while (count) {
+		/* workaround the compatibility issue with xHCI controller*/
+		usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX);
+
+		size = min_t(uint, count, BULK_SIZE);
+		memcpy(send_buf, firmware->data + sent, size);
+
+		err = usb_bulk_msg(udev, pipe, send_buf, size,
+					&len, 3000);
+
+		if (err || (len != size)) {
+			ath3k_log_failed_loading(err, len, size, count);
+			goto error;
+		}
+
+		sent  += size;
+		count -= size;
+	}
+
+error:
+	kfree(send_buf);
+	return err;
+}
+
+static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
+{
+	return usb_control_msg_recv(udev, 0, ATH3K_GETSTATE,
+				    USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+				    state, 1, USB_CTRL_SET_TIMEOUT,
+				    GFP_KERNEL);
+}
+
+static int ath3k_get_version(struct usb_device *udev,
+			struct ath3k_version *version)
+{
+	return usb_control_msg_recv(udev, 0, ATH3K_GETVERSION,
+				    USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+				    version, sizeof(*version), USB_CTRL_SET_TIMEOUT,
+				    GFP_KERNEL);
+}
+
+static int ath3k_load_fwfile(struct usb_device *udev,
+		const struct firmware *firmware)
+{
+	u8 *send_buf;
+	int len = 0;
+	int err, pipe, size, count, sent = 0;
+	int ret;
+
+	count = firmware->size;
+
+	send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
+	if (!send_buf) {
+		BT_ERR("Can't allocate memory chunk for firmware");
+		return -ENOMEM;
+	}
+
+	size = min_t(uint, count, FW_HDR_SIZE);
+
+	ret = usb_control_msg_send(udev, 0, ATH3K_DNLOAD, USB_TYPE_VENDOR, 0, 0,
+				   firmware->data, size, USB_CTRL_SET_TIMEOUT,
+				   GFP_KERNEL);
+	if (ret) {
+		BT_ERR("Can't change to loading configuration err");
+		kfree(send_buf);
+		return ret;
+	}
+
+	sent += size;
+	count -= size;
+
+	pipe = usb_sndbulkpipe(udev, 0x02);
+
+	while (count) {
+		/* workaround the compatibility issue with xHCI controller*/
+		usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX);
+
+		size = min_t(uint, count, BULK_SIZE);
+		memcpy(send_buf, firmware->data + sent, size);
+
+		err = usb_bulk_msg(udev, pipe, send_buf, size,
+					&len, 3000);
+		if (err || (len != size)) {
+			ath3k_log_failed_loading(err, len, size, count);
+			kfree(send_buf);
+			return err;
+		}
+		sent  += size;
+		count -= size;
+	}
+
+	kfree(send_buf);
+	return 0;
+}
+
+static void ath3k_switch_pid(struct usb_device *udev)
+{
+	usb_control_msg_send(udev, 0, USB_REG_SWITCH_VID_PID, USB_TYPE_VENDOR,
+			     0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
+}
+
+static int ath3k_set_normal_mode(struct usb_device *udev)
+{
+	unsigned char fw_state;
+	int ret;
+
+	ret = ath3k_get_state(udev, &fw_state);
+	if (ret) {
+		BT_ERR("Can't get state to change to normal mode err");
+		return ret;
+	}
+
+	if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
+		BT_DBG("firmware was already in normal mode");
+		return 0;
+	}
+
+	return usb_control_msg_send(udev, 0, ATH3K_SET_NORMAL_MODE,
+				    USB_TYPE_VENDOR, 0, 0, NULL, 0,
+				    USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
+}
+
+static int ath3k_load_patch(struct usb_device *udev)
+{
+	unsigned char fw_state;
+	char filename[ATH3K_NAME_LEN];
+	const struct firmware *firmware;
+	struct ath3k_version fw_version;
+	__u32 pt_rom_version, pt_build_version;
+	int ret;
+
+	ret = ath3k_get_state(udev, &fw_state);
+	if (ret) {
+		BT_ERR("Can't get state to change to load ram patch err");
+		return ret;
+	}
+
+	if (fw_state & ATH3K_PATCH_UPDATE) {
+		BT_DBG("Patch was already downloaded");
+		return 0;
+	}
+
+	ret = ath3k_get_version(udev, &fw_version);
+	if (ret) {
+		BT_ERR("Can't get version to change to load ram patch err");
+		return ret;
+	}
+
+	snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
+		 le32_to_cpu(fw_version.rom_version));
+
+	ret = request_firmware(&firmware, filename, &udev->dev);
+	if (ret < 0) {
+		BT_ERR("Patch file not found %s", filename);
+		return ret;
+	}
+
+	pt_rom_version = get_unaligned_le32(firmware->data +
+					    firmware->size - 8);
+	pt_build_version = get_unaligned_le32(firmware->data +
+					      firmware->size - 4);
+
+	if (pt_rom_version != le32_to_cpu(fw_version.rom_version) ||
+	    pt_build_version <= le32_to_cpu(fw_version.build_version)) {
+		BT_ERR("Patch file version did not match with firmware");
+		release_firmware(firmware);
+		return -EINVAL;
+	}
+
+	ret = ath3k_load_fwfile(udev, firmware);
+	release_firmware(firmware);
+
+	return ret;
+}
+
+static int ath3k_load_syscfg(struct usb_device *udev)
+{
+	unsigned char fw_state;
+	char filename[ATH3K_NAME_LEN];
+	const struct firmware *firmware;
+	struct ath3k_version fw_version;
+	int clk_value, ret;
+
+	ret = ath3k_get_state(udev, &fw_state);
+	if (ret) {
+		BT_ERR("Can't get state to change to load configuration err");
+		return -EBUSY;
+	}
+
+	ret = ath3k_get_version(udev, &fw_version);
+	if (ret) {
+		BT_ERR("Can't get version to change to load ram patch err");
+		return ret;
+	}
+
+	switch (fw_version.ref_clock) {
+
+	case ATH3K_XTAL_FREQ_26M:
+		clk_value = 26;
+		break;
+	case ATH3K_XTAL_FREQ_40M:
+		clk_value = 40;
+		break;
+	case ATH3K_XTAL_FREQ_19P2:
+		clk_value = 19;
+		break;
+	default:
+		clk_value = 0;
+		break;
+	}
+
+	snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
+		le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
+
+	ret = request_firmware(&firmware, filename, &udev->dev);
+	if (ret < 0) {
+		BT_ERR("Configuration file not found %s", filename);
+		return ret;
+	}
+
+	ret = ath3k_load_fwfile(udev, firmware);
+	release_firmware(firmware);
+
+	return ret;
+}
+
+static int ath3k_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	const struct firmware *firmware;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	int ret;
+
+	BT_DBG("intf %p id %p", intf, id);
+
+	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
+		return -ENODEV;
+
+	/* match device ID in ath3k blacklist table */
+	if (!id->driver_info) {
+		const struct usb_device_id *match;
+
+		match = usb_match_id(intf, ath3k_blist_tbl);
+		if (match)
+			id = match;
+	}
+
+	/* load patch and sysconfig files for AR3012 */
+	if (id->driver_info & BTUSB_ATH3012) {
+		/* New firmware with patch and sysconfig files already loaded */
+		if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
+			return -ENODEV;
+
+		ret = ath3k_load_patch(udev);
+		if (ret < 0) {
+			BT_ERR("Loading patch file failed");
+			return ret;
+		}
+		ret = ath3k_load_syscfg(udev);
+		if (ret < 0) {
+			BT_ERR("Loading sysconfig file failed");
+			return ret;
+		}
+		ret = ath3k_set_normal_mode(udev);
+		if (ret) {
+			BT_ERR("Set normal mode failed");
+			return ret;
+		}
+		ath3k_switch_pid(udev);
+		return 0;
+	}
+
+	ret = request_firmware(&firmware, ATH3K_FIRMWARE, &udev->dev);
+	if (ret < 0) {
+		if (ret == -ENOENT)
+			BT_ERR("Firmware file \"%s\" not found",
+							ATH3K_FIRMWARE);
+		else
+			BT_ERR("Firmware file \"%s\" request failed (err=%d)",
+							ATH3K_FIRMWARE, ret);
+		return ret;
+	}
+
+	ret = ath3k_load_firmware(udev, firmware);
+	release_firmware(firmware);
+
+	return ret;
+}
+
+static void ath3k_disconnect(struct usb_interface *intf)
+{
+	BT_DBG("%s intf %p", __func__, intf);
+}
+
+static struct usb_driver ath3k_driver = {
+	.name		= "ath3k",
+	.probe		= ath3k_probe,
+	.disconnect	= ath3k_disconnect,
+	.id_table	= ath3k_table,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(ath3k_driver);
+
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(ATH3K_FIRMWARE);
diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c
new file mode 100644
index 000000000..c738ad040
--- /dev/null
+++ b/drivers/bluetooth/bcm203x.c
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Broadcom Blutonium firmware driver
+ *
+ *  Copyright (C) 2003  Maxim Krasnyansky <maxk@qualcomm.com>
+ *  Copyright (C) 2003  Marcel Holtmann <marcel@holtmann.org>
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+
+#include <linux/device.h>
+#include <linux/firmware.h>
+
+#include <linux/usb.h>
+
+#include <net/bluetooth/bluetooth.h>
+
+#define VERSION "1.2"
+
+static const struct usb_device_id bcm203x_table[] = {
+	/* Broadcom Blutonium (BCM2033) */
+	{ USB_DEVICE(0x0a5c, 0x2033) },
+
+	{ }	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, bcm203x_table);
+
+#define BCM203X_ERROR		0
+#define BCM203X_RESET		1
+#define BCM203X_LOAD_MINIDRV	2
+#define BCM203X_SELECT_MEMORY	3
+#define BCM203X_CHECK_MEMORY	4
+#define BCM203X_LOAD_FIRMWARE	5
+#define BCM203X_CHECK_FIRMWARE	6
+
+#define BCM203X_IN_EP		0x81
+#define BCM203X_OUT_EP		0x02
+
+struct bcm203x_data {
+	struct usb_device	*udev;
+
+	unsigned long		state;
+
+	struct work_struct	work;
+	atomic_t		shutdown;
+
+	struct urb		*urb;
+	unsigned char		*buffer;
+
+	unsigned char		*fw_data;
+	unsigned int		fw_size;
+	unsigned int		fw_sent;
+};
+
+static void bcm203x_complete(struct urb *urb)
+{
+	struct bcm203x_data *data = urb->context;
+	struct usb_device *udev = urb->dev;
+	int len;
+
+	BT_DBG("udev %p urb %p", udev, urb);
+
+	if (urb->status) {
+		BT_ERR("URB failed with status %d", urb->status);
+		data->state = BCM203X_ERROR;
+		return;
+	}
+
+	switch (data->state) {
+	case BCM203X_LOAD_MINIDRV:
+		memcpy(data->buffer, "#", 1);
+
+		usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
+				data->buffer, 1, bcm203x_complete, data);
+
+		data->state = BCM203X_SELECT_MEMORY;
+
+		/* use workqueue to have a small delay */
+		schedule_work(&data->work);
+		break;
+
+	case BCM203X_SELECT_MEMORY:
+		usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, BCM203X_IN_EP),
+				data->buffer, 32, bcm203x_complete, data, 1);
+
+		data->state = BCM203X_CHECK_MEMORY;
+
+		if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
+			BT_ERR("Can't submit URB");
+		break;
+
+	case BCM203X_CHECK_MEMORY:
+		if (data->buffer[0] != '#') {
+			BT_ERR("Memory select failed");
+			data->state = BCM203X_ERROR;
+			break;
+		}
+
+		data->state = BCM203X_LOAD_FIRMWARE;
+		fallthrough;
+	case BCM203X_LOAD_FIRMWARE:
+		if (data->fw_sent == data->fw_size) {
+			usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, BCM203X_IN_EP),
+				data->buffer, 32, bcm203x_complete, data, 1);
+
+			data->state = BCM203X_CHECK_FIRMWARE;
+		} else {
+			len = min_t(uint, data->fw_size - data->fw_sent, 4096);
+
+			usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
+				data->fw_data + data->fw_sent, len, bcm203x_complete, data);
+
+			data->fw_sent += len;
+		}
+
+		if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
+			BT_ERR("Can't submit URB");
+		break;
+
+	case BCM203X_CHECK_FIRMWARE:
+		if (data->buffer[0] != '.') {
+			BT_ERR("Firmware loading failed");
+			data->state = BCM203X_ERROR;
+			break;
+		}
+
+		data->state = BCM203X_RESET;
+		break;
+	}
+}
+
+static void bcm203x_work(struct work_struct *work)
+{
+	struct bcm203x_data *data =
+		container_of(work, struct bcm203x_data, work);
+
+	if (atomic_read(&data->shutdown))
+		return;
+
+	if (usb_submit_urb(data->urb, GFP_KERNEL) < 0)
+		BT_ERR("Can't submit URB");
+}
+
+static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	const struct firmware *firmware;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct bcm203x_data *data;
+	int size;
+
+	BT_DBG("intf %p id %p", intf, id);
+
+	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
+		return -ENODEV;
+
+	data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->udev  = udev;
+	data->state = BCM203X_LOAD_MINIDRV;
+
+	data->urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!data->urb)
+		return -ENOMEM;
+
+	if (request_firmware(&firmware, "BCM2033-MD.hex", &udev->dev) < 0) {
+		BT_ERR("Mini driver request failed");
+		usb_free_urb(data->urb);
+		return -EIO;
+	}
+
+	BT_DBG("minidrv data %p size %zu", firmware->data, firmware->size);
+
+	size = max_t(uint, firmware->size, 4096);
+
+	data->buffer = kmalloc(size, GFP_KERNEL);
+	if (!data->buffer) {
+		BT_ERR("Can't allocate memory for mini driver");
+		release_firmware(firmware);
+		usb_free_urb(data->urb);
+		return -ENOMEM;
+	}
+
+	memcpy(data->buffer, firmware->data, firmware->size);
+
+	usb_fill_bulk_urb(data->urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
+			data->buffer, firmware->size, bcm203x_complete, data);
+
+	release_firmware(firmware);
+
+	if (request_firmware(&firmware, "BCM2033-FW.bin", &udev->dev) < 0) {
+		BT_ERR("Firmware request failed");
+		usb_free_urb(data->urb);
+		kfree(data->buffer);
+		return -EIO;
+	}
+
+	BT_DBG("firmware data %p size %zu", firmware->data, firmware->size);
+
+	data->fw_data = kmemdup(firmware->data, firmware->size, GFP_KERNEL);
+	if (!data->fw_data) {
+		BT_ERR("Can't allocate memory for firmware image");
+		release_firmware(firmware);
+		usb_free_urb(data->urb);
+		kfree(data->buffer);
+		return -ENOMEM;
+	}
+
+	data->fw_size = firmware->size;
+	data->fw_sent = 0;
+
+	release_firmware(firmware);
+
+	INIT_WORK(&data->work, bcm203x_work);
+
+	usb_set_intfdata(intf, data);
+
+	/* use workqueue to have a small delay */
+	schedule_work(&data->work);
+
+	return 0;
+}
+
+static void bcm203x_disconnect(struct usb_interface *intf)
+{
+	struct bcm203x_data *data = usb_get_intfdata(intf);
+
+	BT_DBG("intf %p", intf);
+
+	atomic_inc(&data->shutdown);
+	cancel_work_sync(&data->work);
+
+	usb_kill_urb(data->urb);
+
+	usb_set_intfdata(intf, NULL);
+
+	usb_free_urb(data->urb);
+	kfree(data->fw_data);
+	kfree(data->buffer);
+}
+
+static struct usb_driver bcm203x_driver = {
+	.name		= "bcm203x",
+	.probe		= bcm203x_probe,
+	.disconnect	= bcm203x_disconnect,
+	.id_table	= bcm203x_table,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(bcm203x_driver);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Broadcom Blutonium firmware driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("BCM2033-MD.hex");
+MODULE_FIRMWARE("BCM2033-FW.bin");
diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c
new file mode 100644
index 000000000..cab93935c
--- /dev/null
+++ b/drivers/bluetooth/bfusb.c
@@ -0,0 +1,725 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  AVM BlueFRITZ! USB driver
+ *
+ *  Copyright (C) 2003-2006  Marcel Holtmann <marcel@holtmann.org>
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+
+#include <linux/device.h>
+#include <linux/firmware.h>
+
+#include <linux/usb.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#define VERSION "1.2"
+
+static struct usb_driver bfusb_driver;
+
+static const struct usb_device_id bfusb_table[] = {
+	/* AVM BlueFRITZ! USB */
+	{ USB_DEVICE(0x057c, 0x2200) },
+
+	{ }	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, bfusb_table);
+
+#define BFUSB_MAX_BLOCK_SIZE	256
+
+#define BFUSB_BLOCK_TIMEOUT	3000
+
+#define BFUSB_TX_PROCESS	1
+#define BFUSB_TX_WAKEUP		2
+
+#define BFUSB_MAX_BULK_TX	2
+#define BFUSB_MAX_BULK_RX	2
+
+struct bfusb_data {
+	struct hci_dev		*hdev;
+
+	unsigned long		state;
+
+	struct usb_device	*udev;
+
+	unsigned int		bulk_in_ep;
+	unsigned int		bulk_out_ep;
+	unsigned int		bulk_pkt_size;
+
+	rwlock_t		lock;
+
+	struct sk_buff_head	transmit_q;
+
+	struct sk_buff		*reassembly;
+
+	atomic_t		pending_tx;
+	struct sk_buff_head	pending_q;
+	struct sk_buff_head	completed_q;
+};
+
+struct bfusb_data_scb {
+	struct urb *urb;
+};
+
+static void bfusb_tx_complete(struct urb *urb);
+static void bfusb_rx_complete(struct urb *urb);
+
+static struct urb *bfusb_get_completed(struct bfusb_data *data)
+{
+	struct sk_buff *skb;
+	struct urb *urb = NULL;
+
+	BT_DBG("bfusb %p", data);
+
+	skb = skb_dequeue(&data->completed_q);
+	if (skb) {
+		urb = ((struct bfusb_data_scb *) skb->cb)->urb;
+		kfree_skb(skb);
+	}
+
+	return urb;
+}
+
+static void bfusb_unlink_urbs(struct bfusb_data *data)
+{
+	struct sk_buff *skb;
+	struct urb *urb;
+
+	BT_DBG("bfusb %p", data);
+
+	while ((skb = skb_dequeue(&data->pending_q))) {
+		urb = ((struct bfusb_data_scb *) skb->cb)->urb;
+		usb_kill_urb(urb);
+		skb_queue_tail(&data->completed_q, skb);
+	}
+
+	while ((urb = bfusb_get_completed(data)))
+		usb_free_urb(urb);
+}
+
+static int bfusb_send_bulk(struct bfusb_data *data, struct sk_buff *skb)
+{
+	struct bfusb_data_scb *scb = (void *) skb->cb;
+	struct urb *urb = bfusb_get_completed(data);
+	int err, pipe;
+
+	BT_DBG("bfusb %p skb %p len %d", data, skb, skb->len);
+
+	if (!urb) {
+		urb = usb_alloc_urb(0, GFP_ATOMIC);
+		if (!urb)
+			return -ENOMEM;
+	}
+
+	pipe = usb_sndbulkpipe(data->udev, data->bulk_out_ep);
+
+	usb_fill_bulk_urb(urb, data->udev, pipe, skb->data, skb->len,
+			bfusb_tx_complete, skb);
+
+	scb->urb = urb;
+
+	skb_queue_tail(&data->pending_q, skb);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err) {
+		bt_dev_err(data->hdev, "bulk tx submit failed urb %p err %d",
+			   urb, err);
+		skb_unlink(skb, &data->pending_q);
+		usb_free_urb(urb);
+	} else
+		atomic_inc(&data->pending_tx);
+
+	return err;
+}
+
+static void bfusb_tx_wakeup(struct bfusb_data *data)
+{
+	struct sk_buff *skb;
+
+	BT_DBG("bfusb %p", data);
+
+	if (test_and_set_bit(BFUSB_TX_PROCESS, &data->state)) {
+		set_bit(BFUSB_TX_WAKEUP, &data->state);
+		return;
+	}
+
+	do {
+		clear_bit(BFUSB_TX_WAKEUP, &data->state);
+
+		while ((atomic_read(&data->pending_tx) < BFUSB_MAX_BULK_TX) &&
+				(skb = skb_dequeue(&data->transmit_q))) {
+			if (bfusb_send_bulk(data, skb) < 0) {
+				skb_queue_head(&data->transmit_q, skb);
+				break;
+			}
+		}
+
+	} while (test_bit(BFUSB_TX_WAKEUP, &data->state));
+
+	clear_bit(BFUSB_TX_PROCESS, &data->state);
+}
+
+static void bfusb_tx_complete(struct urb *urb)
+{
+	struct sk_buff *skb = (struct sk_buff *) urb->context;
+	struct bfusb_data *data = (struct bfusb_data *) skb->dev;
+
+	BT_DBG("bfusb %p urb %p skb %p len %d", data, urb, skb, skb->len);
+
+	atomic_dec(&data->pending_tx);
+
+	if (!test_bit(HCI_RUNNING, &data->hdev->flags))
+		return;
+
+	if (!urb->status)
+		data->hdev->stat.byte_tx += skb->len;
+	else
+		data->hdev->stat.err_tx++;
+
+	read_lock(&data->lock);
+
+	skb_unlink(skb, &data->pending_q);
+	skb_queue_tail(&data->completed_q, skb);
+
+	bfusb_tx_wakeup(data);
+
+	read_unlock(&data->lock);
+}
+
+
+static int bfusb_rx_submit(struct bfusb_data *data, struct urb *urb)
+{
+	struct bfusb_data_scb *scb;
+	struct sk_buff *skb;
+	int err, pipe, size = HCI_MAX_FRAME_SIZE + 32;
+
+	BT_DBG("bfusb %p urb %p", data, urb);
+
+	if (!urb) {
+		urb = usb_alloc_urb(0, GFP_ATOMIC);
+		if (!urb)
+			return -ENOMEM;
+	}
+
+	skb = bt_skb_alloc(size, GFP_ATOMIC);
+	if (!skb) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	skb->dev = (void *) data;
+
+	scb = (struct bfusb_data_scb *) skb->cb;
+	scb->urb = urb;
+
+	pipe = usb_rcvbulkpipe(data->udev, data->bulk_in_ep);
+
+	usb_fill_bulk_urb(urb, data->udev, pipe, skb->data, size,
+			bfusb_rx_complete, skb);
+
+	skb_queue_tail(&data->pending_q, skb);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err) {
+		bt_dev_err(data->hdev, "bulk rx submit failed urb %p err %d",
+			   urb, err);
+		skb_unlink(skb, &data->pending_q);
+		kfree_skb(skb);
+		usb_free_urb(urb);
+	}
+
+	return err;
+}
+
+static inline int bfusb_recv_block(struct bfusb_data *data, int hdr, unsigned char *buf, int len)
+{
+	BT_DBG("bfusb %p hdr 0x%02x data %p len %d", data, hdr, buf, len);
+
+	if (hdr & 0x10) {
+		bt_dev_err(data->hdev, "error in block");
+		kfree_skb(data->reassembly);
+		data->reassembly = NULL;
+		return -EIO;
+	}
+
+	if (hdr & 0x04) {
+		struct sk_buff *skb;
+		unsigned char pkt_type;
+		int pkt_len = 0;
+
+		if (data->reassembly) {
+			bt_dev_err(data->hdev, "unexpected start block");
+			kfree_skb(data->reassembly);
+			data->reassembly = NULL;
+		}
+
+		if (len < 1) {
+			bt_dev_err(data->hdev, "no packet type found");
+			return -EPROTO;
+		}
+
+		pkt_type = *buf++; len--;
+
+		switch (pkt_type) {
+		case HCI_EVENT_PKT:
+			if (len >= HCI_EVENT_HDR_SIZE) {
+				struct hci_event_hdr *hdr = (struct hci_event_hdr *) buf;
+				pkt_len = HCI_EVENT_HDR_SIZE + hdr->plen;
+			} else {
+				bt_dev_err(data->hdev, "event block is too short");
+				return -EILSEQ;
+			}
+			break;
+
+		case HCI_ACLDATA_PKT:
+			if (len >= HCI_ACL_HDR_SIZE) {
+				struct hci_acl_hdr *hdr = (struct hci_acl_hdr *) buf;
+				pkt_len = HCI_ACL_HDR_SIZE + __le16_to_cpu(hdr->dlen);
+			} else {
+				bt_dev_err(data->hdev, "data block is too short");
+				return -EILSEQ;
+			}
+			break;
+
+		case HCI_SCODATA_PKT:
+			if (len >= HCI_SCO_HDR_SIZE) {
+				struct hci_sco_hdr *hdr = (struct hci_sco_hdr *) buf;
+				pkt_len = HCI_SCO_HDR_SIZE + hdr->dlen;
+			} else {
+				bt_dev_err(data->hdev, "audio block is too short");
+				return -EILSEQ;
+			}
+			break;
+		}
+
+		skb = bt_skb_alloc(pkt_len, GFP_ATOMIC);
+		if (!skb) {
+			bt_dev_err(data->hdev, "no memory for the packet");
+			return -ENOMEM;
+		}
+
+		hci_skb_pkt_type(skb) = pkt_type;
+
+		data->reassembly = skb;
+	} else {
+		if (!data->reassembly) {
+			bt_dev_err(data->hdev, "unexpected continuation block");
+			return -EIO;
+		}
+	}
+
+	if (len > 0)
+		skb_put_data(data->reassembly, buf, len);
+
+	if (hdr & 0x08) {
+		hci_recv_frame(data->hdev, data->reassembly);
+		data->reassembly = NULL;
+	}
+
+	return 0;
+}
+
+static void bfusb_rx_complete(struct urb *urb)
+{
+	struct sk_buff *skb = (struct sk_buff *) urb->context;
+	struct bfusb_data *data = (struct bfusb_data *) skb->dev;
+	unsigned char *buf = urb->transfer_buffer;
+	int count = urb->actual_length;
+	int err, hdr, len;
+
+	BT_DBG("bfusb %p urb %p skb %p len %d", data, urb, skb, skb->len);
+
+	read_lock(&data->lock);
+
+	if (!test_bit(HCI_RUNNING, &data->hdev->flags))
+		goto unlock;
+
+	if (urb->status || !count)
+		goto resubmit;
+
+	data->hdev->stat.byte_rx += count;
+
+	skb_put(skb, count);
+
+	while (count) {
+		hdr = buf[0] | (buf[1] << 8);
+
+		if (hdr & 0x4000) {
+			len = 0;
+			count -= 2;
+			buf   += 2;
+		} else {
+			len = (buf[2] == 0) ? 256 : buf[2];
+			count -= 3;
+			buf   += 3;
+		}
+
+		if (count < len) {
+			bt_dev_err(data->hdev, "block extends over URB buffer ranges");
+		}
+
+		if ((hdr & 0xe1) == 0xc1)
+			bfusb_recv_block(data, hdr, buf, len);
+
+		count -= len;
+		buf   += len;
+	}
+
+	skb_unlink(skb, &data->pending_q);
+	kfree_skb(skb);
+
+	bfusb_rx_submit(data, urb);
+
+	read_unlock(&data->lock);
+
+	return;
+
+resubmit:
+	urb->dev = data->udev;
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err) {
+		bt_dev_err(data->hdev, "bulk resubmit failed urb %p err %d",
+			   urb, err);
+	}
+
+unlock:
+	read_unlock(&data->lock);
+}
+
+static int bfusb_open(struct hci_dev *hdev)
+{
+	struct bfusb_data *data = hci_get_drvdata(hdev);
+	unsigned long flags;
+	int i, err;
+
+	BT_DBG("hdev %p bfusb %p", hdev, data);
+
+	write_lock_irqsave(&data->lock, flags);
+
+	err = bfusb_rx_submit(data, NULL);
+	if (!err) {
+		for (i = 1; i < BFUSB_MAX_BULK_RX; i++)
+			bfusb_rx_submit(data, NULL);
+	}
+
+	write_unlock_irqrestore(&data->lock, flags);
+
+	return err;
+}
+
+static int bfusb_flush(struct hci_dev *hdev)
+{
+	struct bfusb_data *data = hci_get_drvdata(hdev);
+
+	BT_DBG("hdev %p bfusb %p", hdev, data);
+
+	skb_queue_purge(&data->transmit_q);
+
+	return 0;
+}
+
+static int bfusb_close(struct hci_dev *hdev)
+{
+	struct bfusb_data *data = hci_get_drvdata(hdev);
+	unsigned long flags;
+
+	BT_DBG("hdev %p bfusb %p", hdev, data);
+
+	write_lock_irqsave(&data->lock, flags);
+	write_unlock_irqrestore(&data->lock, flags);
+
+	bfusb_unlink_urbs(data);
+	bfusb_flush(hdev);
+
+	return 0;
+}
+
+static int bfusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct bfusb_data *data = hci_get_drvdata(hdev);
+	struct sk_buff *nskb;
+	unsigned char buf[3];
+	int sent = 0, size, count;
+
+	BT_DBG("hdev %p skb %p type %d len %d", hdev, skb,
+	       hci_skb_pkt_type(skb), skb->len);
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+	}
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+
+	count = skb->len;
+
+	/* Max HCI frame size seems to be 1511 + 1 */
+	nskb = bt_skb_alloc(count + 32, GFP_KERNEL);
+	if (!nskb) {
+		bt_dev_err(hdev, "Can't allocate memory for new packet");
+		return -ENOMEM;
+	}
+
+	nskb->dev = (void *) data;
+
+	while (count) {
+		size = min_t(uint, count, BFUSB_MAX_BLOCK_SIZE);
+
+		buf[0] = 0xc1 | ((sent == 0) ? 0x04 : 0) | ((count == size) ? 0x08 : 0);
+		buf[1] = 0x00;
+		buf[2] = (size == BFUSB_MAX_BLOCK_SIZE) ? 0 : size;
+
+		skb_put_data(nskb, buf, 3);
+		skb_copy_from_linear_data_offset(skb, sent, skb_put(nskb, size), size);
+
+		sent  += size;
+		count -= size;
+	}
+
+	/* Don't send frame with multiple size of bulk max packet */
+	if ((nskb->len % data->bulk_pkt_size) == 0) {
+		buf[0] = 0xdd;
+		buf[1] = 0x00;
+		skb_put_data(nskb, buf, 2);
+	}
+
+	read_lock(&data->lock);
+
+	skb_queue_tail(&data->transmit_q, nskb);
+	bfusb_tx_wakeup(data);
+
+	read_unlock(&data->lock);
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int bfusb_load_firmware(struct bfusb_data *data,
+			       const unsigned char *firmware, int count)
+{
+	unsigned char *buf;
+	int err, pipe, len, size, sent = 0;
+
+	BT_DBG("bfusb %p udev %p", data, data->udev);
+
+	BT_INFO("BlueFRITZ! USB loading firmware");
+
+	buf = kmalloc(BFUSB_MAX_BLOCK_SIZE + 3, GFP_KERNEL);
+	if (!buf) {
+		BT_ERR("Can't allocate memory chunk for firmware");
+		return -ENOMEM;
+	}
+
+	pipe = usb_sndctrlpipe(data->udev, 0);
+
+	if (usb_control_msg(data->udev, pipe, USB_REQ_SET_CONFIGURATION,
+				0, 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT) < 0) {
+		BT_ERR("Can't change to loading configuration");
+		kfree(buf);
+		return -EBUSY;
+	}
+
+	data->udev->toggle[0] = data->udev->toggle[1] = 0;
+
+	pipe = usb_sndbulkpipe(data->udev, data->bulk_out_ep);
+
+	while (count) {
+		size = min_t(uint, count, BFUSB_MAX_BLOCK_SIZE + 3);
+
+		memcpy(buf, firmware + sent, size);
+
+		err = usb_bulk_msg(data->udev, pipe, buf, size,
+					&len, BFUSB_BLOCK_TIMEOUT);
+
+		if (err || (len != size)) {
+			BT_ERR("Error in firmware loading");
+			goto error;
+		}
+
+		sent  += size;
+		count -= size;
+	}
+
+	err = usb_bulk_msg(data->udev, pipe, NULL, 0,
+					&len, BFUSB_BLOCK_TIMEOUT);
+	if (err < 0) {
+		BT_ERR("Error in null packet request");
+		goto error;
+	}
+
+	pipe = usb_sndctrlpipe(data->udev, 0);
+
+	err = usb_control_msg(data->udev, pipe, USB_REQ_SET_CONFIGURATION,
+				0, 2, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	if (err < 0) {
+		BT_ERR("Can't change to running configuration");
+		goto error;
+	}
+
+	data->udev->toggle[0] = data->udev->toggle[1] = 0;
+
+	BT_INFO("BlueFRITZ! USB device ready");
+
+	kfree(buf);
+	return 0;
+
+error:
+	kfree(buf);
+
+	pipe = usb_sndctrlpipe(data->udev, 0);
+
+	usb_control_msg(data->udev, pipe, USB_REQ_SET_CONFIGURATION,
+				0, 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+	return err;
+}
+
+static int bfusb_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	const struct firmware *firmware;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_host_endpoint *bulk_out_ep;
+	struct usb_host_endpoint *bulk_in_ep;
+	struct hci_dev *hdev;
+	struct bfusb_data *data;
+
+	BT_DBG("intf %p id %p", intf, id);
+
+	/* Check number of endpoints */
+	if (intf->cur_altsetting->desc.bNumEndpoints < 2)
+		return -EIO;
+
+	bulk_out_ep = &intf->cur_altsetting->endpoint[0];
+	bulk_in_ep  = &intf->cur_altsetting->endpoint[1];
+
+	if (!bulk_out_ep || !bulk_in_ep) {
+		BT_ERR("Bulk endpoints not found");
+		goto done;
+	}
+
+	/* Initialize control structure and load firmware */
+	data = devm_kzalloc(&intf->dev, sizeof(struct bfusb_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->udev = udev;
+	data->bulk_in_ep    = bulk_in_ep->desc.bEndpointAddress;
+	data->bulk_out_ep   = bulk_out_ep->desc.bEndpointAddress;
+	data->bulk_pkt_size = le16_to_cpu(bulk_out_ep->desc.wMaxPacketSize);
+
+	if (!data->bulk_pkt_size)
+		goto done;
+
+	rwlock_init(&data->lock);
+
+	data->reassembly = NULL;
+
+	skb_queue_head_init(&data->transmit_q);
+	skb_queue_head_init(&data->pending_q);
+	skb_queue_head_init(&data->completed_q);
+
+	if (request_firmware(&firmware, "bfubase.frm", &udev->dev) < 0) {
+		BT_ERR("Firmware request failed");
+		goto done;
+	}
+
+	BT_DBG("firmware data %p size %zu", firmware->data, firmware->size);
+
+	if (bfusb_load_firmware(data, firmware->data, firmware->size) < 0) {
+		BT_ERR("Firmware loading failed");
+		goto release;
+	}
+
+	release_firmware(firmware);
+
+	/* Initialize and register HCI device */
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Can't allocate HCI device");
+		goto done;
+	}
+
+	data->hdev = hdev;
+
+	hdev->bus = HCI_USB;
+	hci_set_drvdata(hdev, data);
+	SET_HCIDEV_DEV(hdev, &intf->dev);
+
+	hdev->open  = bfusb_open;
+	hdev->close = bfusb_close;
+	hdev->flush = bfusb_flush;
+	hdev->send  = bfusb_send_frame;
+
+	set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
+
+	if (hci_register_dev(hdev) < 0) {
+		BT_ERR("Can't register HCI device");
+		hci_free_dev(hdev);
+		goto done;
+	}
+
+	usb_set_intfdata(intf, data);
+
+	return 0;
+
+release:
+	release_firmware(firmware);
+
+done:
+	return -EIO;
+}
+
+static void bfusb_disconnect(struct usb_interface *intf)
+{
+	struct bfusb_data *data = usb_get_intfdata(intf);
+	struct hci_dev *hdev = data->hdev;
+
+	BT_DBG("intf %p", intf);
+
+	if (!hdev)
+		return;
+
+	usb_set_intfdata(intf, NULL);
+
+	bfusb_close(hdev);
+
+	hci_unregister_dev(hdev);
+	hci_free_dev(hdev);
+}
+
+static struct usb_driver bfusb_driver = {
+	.name		= "bfusb",
+	.probe		= bfusb_probe,
+	.disconnect	= bfusb_disconnect,
+	.id_table	= bfusb_table,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(bfusb_driver);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("BlueFRITZ! USB driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("bfubase.frm");
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
new file mode 100644
index 000000000..36eabf617
--- /dev/null
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -0,0 +1,908 @@
+/*
+ *
+ *  Bluetooth driver for the Anycom BlueCard (LSE039/LSE041)
+ *
+ *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *  The initial developer of the original code is David A. Hinds
+ *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
+#include <linux/moduleparam.h>
+#include <linux/wait.h>
+
+#include <linux/skbuff.h>
+#include <linux/io.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+
+
+/* ======================== Module parameters ======================== */
+
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Bluetooth driver for the Anycom BlueCard (LSE039/LSE041)");
+MODULE_LICENSE("GPL");
+
+
+
+/* ======================== Local structures ======================== */
+
+
+struct bluecard_info {
+	struct pcmcia_device *p_dev;
+
+	struct hci_dev *hdev;
+
+	spinlock_t lock;		/* For serializing operations */
+	struct timer_list timer;	/* For LED control */
+
+	struct sk_buff_head txq;
+	unsigned long tx_state;
+
+	unsigned long rx_state;
+	unsigned long rx_count;
+	struct sk_buff *rx_skb;
+
+	unsigned char ctrl_reg;
+	unsigned long hw_state;		/* Status of the hardware and LED control */
+};
+
+
+static int bluecard_config(struct pcmcia_device *link);
+static void bluecard_release(struct pcmcia_device *link);
+
+static void bluecard_detach(struct pcmcia_device *p_dev);
+
+
+/* Default baud rate: 57600, 115200, 230400 or 460800 */
+#define DEFAULT_BAUD_RATE  230400
+
+
+/* Hardware states */
+#define CARD_READY             1
+#define CARD_ACTIVITY	       2
+#define CARD_HAS_PCCARD_ID     4
+#define CARD_HAS_POWER_LED     5
+#define CARD_HAS_ACTIVITY_LED  6
+
+/* Transmit states  */
+#define XMIT_SENDING         1
+#define XMIT_WAKEUP          2
+#define XMIT_BUFFER_NUMBER   5	/* unset = buffer one, set = buffer two */
+#define XMIT_BUF_ONE_READY   6
+#define XMIT_BUF_TWO_READY   7
+#define XMIT_SENDING_READY   8
+
+/* Receiver states */
+#define RECV_WAIT_PACKET_TYPE   0
+#define RECV_WAIT_EVENT_HEADER  1
+#define RECV_WAIT_ACL_HEADER    2
+#define RECV_WAIT_SCO_HEADER    3
+#define RECV_WAIT_DATA          4
+
+/* Special packet types */
+#define PKT_BAUD_RATE_57600   0x80
+#define PKT_BAUD_RATE_115200  0x81
+#define PKT_BAUD_RATE_230400  0x82
+#define PKT_BAUD_RATE_460800  0x83
+
+
+/* These are the register offsets */
+#define REG_COMMAND     0x20
+#define REG_INTERRUPT   0x21
+#define REG_CONTROL     0x22
+#define REG_RX_CONTROL  0x24
+#define REG_CARD_RESET  0x30
+#define REG_LED_CTRL    0x30
+
+/* REG_COMMAND */
+#define REG_COMMAND_TX_BUF_ONE  0x01
+#define REG_COMMAND_TX_BUF_TWO  0x02
+#define REG_COMMAND_RX_BUF_ONE  0x04
+#define REG_COMMAND_RX_BUF_TWO  0x08
+#define REG_COMMAND_RX_WIN_ONE  0x00
+#define REG_COMMAND_RX_WIN_TWO  0x10
+
+/* REG_CONTROL */
+#define REG_CONTROL_BAUD_RATE_57600   0x00
+#define REG_CONTROL_BAUD_RATE_115200  0x01
+#define REG_CONTROL_BAUD_RATE_230400  0x02
+#define REG_CONTROL_BAUD_RATE_460800  0x03
+#define REG_CONTROL_RTS               0x04
+#define REG_CONTROL_BT_ON             0x08
+#define REG_CONTROL_BT_RESET          0x10
+#define REG_CONTROL_BT_RES_PU         0x20
+#define REG_CONTROL_INTERRUPT         0x40
+#define REG_CONTROL_CARD_RESET        0x80
+
+/* REG_RX_CONTROL */
+#define RTS_LEVEL_SHIFT_BITS  0x02
+
+
+
+/* ======================== LED handling routines ======================== */
+
+
+static void bluecard_activity_led_timeout(struct timer_list *t)
+{
+	struct bluecard_info *info = from_timer(info, t, timer);
+	unsigned int iobase = info->p_dev->resource[0]->start;
+
+	if (test_bit(CARD_ACTIVITY, &(info->hw_state))) {
+		/* leave LED in inactive state for HZ/10 for blink effect */
+		clear_bit(CARD_ACTIVITY, &(info->hw_state));
+		mod_timer(&(info->timer), jiffies + HZ / 10);
+	}
+
+	/* Disable activity LED, enable power LED */
+	outb(0x08 | 0x20, iobase + 0x30);
+}
+
+
+static void bluecard_enable_activity_led(struct bluecard_info *info)
+{
+	unsigned int iobase = info->p_dev->resource[0]->start;
+
+	/* don't disturb running blink timer */
+	if (timer_pending(&(info->timer)))
+		return;
+
+	set_bit(CARD_ACTIVITY, &(info->hw_state));
+
+	if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) {
+		/* Enable activity LED, keep power LED enabled */
+		outb(0x18 | 0x60, iobase + 0x30);
+	} else {
+		/* Disable power LED */
+		outb(0x00, iobase + 0x30);
+	}
+
+	/* Stop the LED after HZ/10 */
+	mod_timer(&(info->timer), jiffies + HZ / 10);
+}
+
+
+
+/* ======================== Interrupt handling ======================== */
+
+
+static int bluecard_write(unsigned int iobase, unsigned int offset, __u8 *buf, int len)
+{
+	int i, actual;
+
+	actual = (len > 15) ? 15 : len;
+
+	outb_p(actual, iobase + offset);
+
+	for (i = 0; i < actual; i++)
+		outb_p(buf[i], iobase + offset + i + 1);
+
+	return actual;
+}
+
+
+static void bluecard_write_wakeup(struct bluecard_info *info)
+{
+	if (!info) {
+		BT_ERR("Unknown device");
+		return;
+	}
+
+	if (!test_bit(XMIT_SENDING_READY, &(info->tx_state)))
+		return;
+
+	if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
+		set_bit(XMIT_WAKEUP, &(info->tx_state));
+		return;
+	}
+
+	do {
+		unsigned int iobase = info->p_dev->resource[0]->start;
+		unsigned int offset;
+		unsigned char command;
+		unsigned long ready_bit;
+		register struct sk_buff *skb;
+		int len;
+
+		clear_bit(XMIT_WAKEUP, &(info->tx_state));
+
+		if (!pcmcia_dev_present(info->p_dev))
+			return;
+
+		if (test_bit(XMIT_BUFFER_NUMBER, &(info->tx_state))) {
+			if (!test_bit(XMIT_BUF_TWO_READY, &(info->tx_state)))
+				break;
+			offset = 0x10;
+			command = REG_COMMAND_TX_BUF_TWO;
+			ready_bit = XMIT_BUF_TWO_READY;
+		} else {
+			if (!test_bit(XMIT_BUF_ONE_READY, &(info->tx_state)))
+				break;
+			offset = 0x00;
+			command = REG_COMMAND_TX_BUF_ONE;
+			ready_bit = XMIT_BUF_ONE_READY;
+		}
+
+		skb = skb_dequeue(&(info->txq));
+		if (!skb)
+			break;
+
+		if (hci_skb_pkt_type(skb) & 0x80) {
+			/* Disable RTS */
+			info->ctrl_reg |= REG_CONTROL_RTS;
+			outb(info->ctrl_reg, iobase + REG_CONTROL);
+		}
+
+		/* Activate LED */
+		bluecard_enable_activity_led(info);
+
+		/* Send frame */
+		len = bluecard_write(iobase, offset, skb->data, skb->len);
+
+		/* Tell the FPGA to send the data */
+		outb_p(command, iobase + REG_COMMAND);
+
+		/* Mark the buffer as dirty */
+		clear_bit(ready_bit, &(info->tx_state));
+
+		if (hci_skb_pkt_type(skb) & 0x80) {
+			DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wq);
+			DEFINE_WAIT(wait);
+
+			unsigned char baud_reg;
+
+			switch (hci_skb_pkt_type(skb)) {
+			case PKT_BAUD_RATE_460800:
+				baud_reg = REG_CONTROL_BAUD_RATE_460800;
+				break;
+			case PKT_BAUD_RATE_230400:
+				baud_reg = REG_CONTROL_BAUD_RATE_230400;
+				break;
+			case PKT_BAUD_RATE_115200:
+				baud_reg = REG_CONTROL_BAUD_RATE_115200;
+				break;
+			case PKT_BAUD_RATE_57600:
+			default:
+				baud_reg = REG_CONTROL_BAUD_RATE_57600;
+				break;
+			}
+
+			/* Wait until the command reaches the baseband */
+			mdelay(100);
+
+			/* Set baud on baseband */
+			info->ctrl_reg &= ~0x03;
+			info->ctrl_reg |= baud_reg;
+			outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+			/* Enable RTS */
+			info->ctrl_reg &= ~REG_CONTROL_RTS;
+			outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+			/* Wait before the next HCI packet can be send */
+			mdelay(1000);
+		}
+
+		if (len == skb->len) {
+			kfree_skb(skb);
+		} else {
+			skb_pull(skb, len);
+			skb_queue_head(&(info->txq), skb);
+		}
+
+		info->hdev->stat.byte_tx += len;
+
+		/* Change buffer */
+		change_bit(XMIT_BUFFER_NUMBER, &(info->tx_state));
+
+	} while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
+
+	clear_bit(XMIT_SENDING, &(info->tx_state));
+}
+
+
+static int bluecard_read(unsigned int iobase, unsigned int offset, __u8 *buf, int size)
+{
+	int i, n, len;
+
+	outb(REG_COMMAND_RX_WIN_ONE, iobase + REG_COMMAND);
+
+	len = inb(iobase + offset);
+	n = 0;
+	i = 1;
+
+	while (n < len) {
+
+		if (i == 16) {
+			outb(REG_COMMAND_RX_WIN_TWO, iobase + REG_COMMAND);
+			i = 0;
+		}
+
+		buf[n] = inb(iobase + offset + i);
+
+		n++;
+		i++;
+
+	}
+
+	return len;
+}
+
+
+static void bluecard_receive(struct bluecard_info *info,
+			     unsigned int offset)
+{
+	unsigned int iobase;
+	unsigned char buf[31];
+	int i, len;
+
+	if (!info) {
+		BT_ERR("Unknown device");
+		return;
+	}
+
+	iobase = info->p_dev->resource[0]->start;
+
+	if (test_bit(XMIT_SENDING_READY, &(info->tx_state)))
+		bluecard_enable_activity_led(info);
+
+	len = bluecard_read(iobase, offset, buf, sizeof(buf));
+
+	for (i = 0; i < len; i++) {
+
+		/* Allocate packet */
+		if (!info->rx_skb) {
+			info->rx_state = RECV_WAIT_PACKET_TYPE;
+			info->rx_count = 0;
+			info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+			if (!info->rx_skb) {
+				BT_ERR("Can't allocate mem for new packet");
+				return;
+			}
+		}
+
+		if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
+
+			hci_skb_pkt_type(info->rx_skb) = buf[i];
+
+			switch (hci_skb_pkt_type(info->rx_skb)) {
+
+			case 0x00:
+				/* init packet */
+				if (offset != 0x00) {
+					set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
+					set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
+					set_bit(XMIT_SENDING_READY, &(info->tx_state));
+					bluecard_write_wakeup(info);
+				}
+
+				kfree_skb(info->rx_skb);
+				info->rx_skb = NULL;
+				break;
+
+			case HCI_EVENT_PKT:
+				info->rx_state = RECV_WAIT_EVENT_HEADER;
+				info->rx_count = HCI_EVENT_HDR_SIZE;
+				break;
+
+			case HCI_ACLDATA_PKT:
+				info->rx_state = RECV_WAIT_ACL_HEADER;
+				info->rx_count = HCI_ACL_HDR_SIZE;
+				break;
+
+			case HCI_SCODATA_PKT:
+				info->rx_state = RECV_WAIT_SCO_HEADER;
+				info->rx_count = HCI_SCO_HDR_SIZE;
+				break;
+
+			default:
+				/* unknown packet */
+				BT_ERR("Unknown HCI packet with type 0x%02x received",
+				       hci_skb_pkt_type(info->rx_skb));
+				info->hdev->stat.err_rx++;
+
+				kfree_skb(info->rx_skb);
+				info->rx_skb = NULL;
+				break;
+
+			}
+
+		} else {
+
+			skb_put_u8(info->rx_skb, buf[i]);
+			info->rx_count--;
+
+			if (info->rx_count == 0) {
+
+				int dlen;
+				struct hci_event_hdr *eh;
+				struct hci_acl_hdr *ah;
+				struct hci_sco_hdr *sh;
+
+				switch (info->rx_state) {
+
+				case RECV_WAIT_EVENT_HEADER:
+					eh = hci_event_hdr(info->rx_skb);
+					info->rx_state = RECV_WAIT_DATA;
+					info->rx_count = eh->plen;
+					break;
+
+				case RECV_WAIT_ACL_HEADER:
+					ah = hci_acl_hdr(info->rx_skb);
+					dlen = __le16_to_cpu(ah->dlen);
+					info->rx_state = RECV_WAIT_DATA;
+					info->rx_count = dlen;
+					break;
+
+				case RECV_WAIT_SCO_HEADER:
+					sh = hci_sco_hdr(info->rx_skb);
+					info->rx_state = RECV_WAIT_DATA;
+					info->rx_count = sh->dlen;
+					break;
+
+				case RECV_WAIT_DATA:
+					hci_recv_frame(info->hdev, info->rx_skb);
+					info->rx_skb = NULL;
+					break;
+
+				}
+
+			}
+
+		}
+
+
+	}
+
+	info->hdev->stat.byte_rx += len;
+}
+
+
+static irqreturn_t bluecard_interrupt(int irq, void *dev_inst)
+{
+	struct bluecard_info *info = dev_inst;
+	unsigned int iobase;
+	unsigned char reg;
+
+	if (!info || !info->hdev)
+		/* our irq handler is shared */
+		return IRQ_NONE;
+
+	if (!test_bit(CARD_READY, &(info->hw_state)))
+		return IRQ_HANDLED;
+
+	iobase = info->p_dev->resource[0]->start;
+
+	spin_lock(&(info->lock));
+
+	/* Disable interrupt */
+	info->ctrl_reg &= ~REG_CONTROL_INTERRUPT;
+	outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+	reg = inb(iobase + REG_INTERRUPT);
+
+	if ((reg != 0x00) && (reg != 0xff)) {
+
+		if (reg & 0x04) {
+			bluecard_receive(info, 0x00);
+			outb(0x04, iobase + REG_INTERRUPT);
+			outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND);
+		}
+
+		if (reg & 0x08) {
+			bluecard_receive(info, 0x10);
+			outb(0x08, iobase + REG_INTERRUPT);
+			outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND);
+		}
+
+		if (reg & 0x01) {
+			set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
+			outb(0x01, iobase + REG_INTERRUPT);
+			bluecard_write_wakeup(info);
+		}
+
+		if (reg & 0x02) {
+			set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
+			outb(0x02, iobase + REG_INTERRUPT);
+			bluecard_write_wakeup(info);
+		}
+
+	}
+
+	/* Enable interrupt */
+	info->ctrl_reg |= REG_CONTROL_INTERRUPT;
+	outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+	spin_unlock(&(info->lock));
+
+	return IRQ_HANDLED;
+}
+
+
+
+/* ======================== Device specific HCI commands ======================== */
+
+
+static int bluecard_hci_set_baud_rate(struct hci_dev *hdev, int baud)
+{
+	struct bluecard_info *info = hci_get_drvdata(hdev);
+	struct sk_buff *skb;
+
+	/* Ericsson baud rate command */
+	unsigned char cmd[] = { HCI_COMMAND_PKT, 0x09, 0xfc, 0x01, 0x03 };
+
+	skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_KERNEL);
+	if (!skb) {
+		BT_ERR("Can't allocate mem for new packet");
+		return -1;
+	}
+
+	switch (baud) {
+	case 460800:
+		cmd[4] = 0x00;
+		hci_skb_pkt_type(skb) = PKT_BAUD_RATE_460800;
+		break;
+	case 230400:
+		cmd[4] = 0x01;
+		hci_skb_pkt_type(skb) = PKT_BAUD_RATE_230400;
+		break;
+	case 115200:
+		cmd[4] = 0x02;
+		hci_skb_pkt_type(skb) = PKT_BAUD_RATE_115200;
+		break;
+	case 57600:
+	default:
+		cmd[4] = 0x03;
+		hci_skb_pkt_type(skb) = PKT_BAUD_RATE_57600;
+		break;
+	}
+
+	skb_put_data(skb, cmd, sizeof(cmd));
+
+	skb_queue_tail(&(info->txq), skb);
+
+	bluecard_write_wakeup(info);
+
+	return 0;
+}
+
+
+
+/* ======================== HCI interface ======================== */
+
+
+static int bluecard_hci_flush(struct hci_dev *hdev)
+{
+	struct bluecard_info *info = hci_get_drvdata(hdev);
+
+	/* Drop TX queue */
+	skb_queue_purge(&(info->txq));
+
+	return 0;
+}
+
+
+static int bluecard_hci_open(struct hci_dev *hdev)
+{
+	struct bluecard_info *info = hci_get_drvdata(hdev);
+	unsigned int iobase = info->p_dev->resource[0]->start;
+
+	if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
+		bluecard_hci_set_baud_rate(hdev, DEFAULT_BAUD_RATE);
+
+	/* Enable power LED */
+	outb(0x08 | 0x20, iobase + 0x30);
+
+	return 0;
+}
+
+
+static int bluecard_hci_close(struct hci_dev *hdev)
+{
+	struct bluecard_info *info = hci_get_drvdata(hdev);
+	unsigned int iobase = info->p_dev->resource[0]->start;
+
+	bluecard_hci_flush(hdev);
+
+	/* Stop LED timer */
+	del_timer_sync(&(info->timer));
+
+	/* Disable power LED */
+	outb(0x00, iobase + 0x30);
+
+	return 0;
+}
+
+
+static int bluecard_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct bluecard_info *info = hci_get_drvdata(hdev);
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+	}
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+	skb_queue_tail(&(info->txq), skb);
+
+	bluecard_write_wakeup(info);
+
+	return 0;
+}
+
+
+
+/* ======================== Card services HCI interaction ======================== */
+
+
+static int bluecard_open(struct bluecard_info *info)
+{
+	unsigned int iobase = info->p_dev->resource[0]->start;
+	struct hci_dev *hdev;
+	unsigned char id;
+
+	spin_lock_init(&(info->lock));
+
+	timer_setup(&info->timer, bluecard_activity_led_timeout, 0);
+
+	skb_queue_head_init(&(info->txq));
+
+	info->rx_state = RECV_WAIT_PACKET_TYPE;
+	info->rx_count = 0;
+	info->rx_skb = NULL;
+
+	/* Initialize HCI device */
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Can't allocate HCI device");
+		return -ENOMEM;
+	}
+
+	info->hdev = hdev;
+
+	hdev->bus = HCI_PCCARD;
+	hci_set_drvdata(hdev, info);
+	SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
+
+	hdev->open  = bluecard_hci_open;
+	hdev->close = bluecard_hci_close;
+	hdev->flush = bluecard_hci_flush;
+	hdev->send  = bluecard_hci_send_frame;
+
+	id = inb(iobase + 0x30);
+
+	if ((id & 0x0f) == 0x02)
+		set_bit(CARD_HAS_PCCARD_ID, &(info->hw_state));
+
+	if (id & 0x10)
+		set_bit(CARD_HAS_POWER_LED, &(info->hw_state));
+
+	if (id & 0x20)
+		set_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state));
+
+	/* Reset card */
+	info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET;
+	outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+	/* Turn FPGA off */
+	outb(0x80, iobase + 0x30);
+
+	/* Wait some time */
+	msleep(10);
+
+	/* Turn FPGA on */
+	outb(0x00, iobase + 0x30);
+
+	/* Activate card */
+	info->ctrl_reg = REG_CONTROL_BT_ON | REG_CONTROL_BT_RES_PU;
+	outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+	/* Enable interrupt */
+	outb(0xff, iobase + REG_INTERRUPT);
+	info->ctrl_reg |= REG_CONTROL_INTERRUPT;
+	outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+	if ((id & 0x0f) == 0x03) {
+		/* Disable RTS */
+		info->ctrl_reg |= REG_CONTROL_RTS;
+		outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+		/* Set baud rate */
+		info->ctrl_reg |= 0x03;
+		outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+		/* Enable RTS */
+		info->ctrl_reg &= ~REG_CONTROL_RTS;
+		outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+		set_bit(XMIT_BUF_ONE_READY, &(info->tx_state));
+		set_bit(XMIT_BUF_TWO_READY, &(info->tx_state));
+		set_bit(XMIT_SENDING_READY, &(info->tx_state));
+	}
+
+	/* Start the RX buffers */
+	outb(REG_COMMAND_RX_BUF_ONE, iobase + REG_COMMAND);
+	outb(REG_COMMAND_RX_BUF_TWO, iobase + REG_COMMAND);
+
+	/* Signal that the hardware is ready */
+	set_bit(CARD_READY, &(info->hw_state));
+
+	/* Drop TX queue */
+	skb_queue_purge(&(info->txq));
+
+	/* Control the point at which RTS is enabled */
+	outb((0x0f << RTS_LEVEL_SHIFT_BITS) | 1, iobase + REG_RX_CONTROL);
+
+	/* Timeout before it is safe to send the first HCI packet */
+	msleep(1250);
+
+	/* Register HCI device */
+	if (hci_register_dev(hdev) < 0) {
+		BT_ERR("Can't register HCI device");
+		info->hdev = NULL;
+		hci_free_dev(hdev);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+
+static int bluecard_close(struct bluecard_info *info)
+{
+	unsigned int iobase = info->p_dev->resource[0]->start;
+	struct hci_dev *hdev = info->hdev;
+
+	if (!hdev)
+		return -ENODEV;
+
+	bluecard_hci_close(hdev);
+
+	clear_bit(CARD_READY, &(info->hw_state));
+
+	/* Reset card */
+	info->ctrl_reg = REG_CONTROL_BT_RESET | REG_CONTROL_CARD_RESET;
+	outb(info->ctrl_reg, iobase + REG_CONTROL);
+
+	/* Turn FPGA off */
+	outb(0x80, iobase + 0x30);
+
+	hci_unregister_dev(hdev);
+	hci_free_dev(hdev);
+
+	return 0;
+}
+
+static int bluecard_probe(struct pcmcia_device *link)
+{
+	struct bluecard_info *info;
+
+	/* Create new info device */
+	info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->p_dev = link;
+	link->priv = info;
+
+	link->config_flags |= CONF_ENABLE_IRQ;
+
+	return bluecard_config(link);
+}
+
+
+static void bluecard_detach(struct pcmcia_device *link)
+{
+	bluecard_release(link);
+}
+
+
+static int bluecard_config(struct pcmcia_device *link)
+{
+	struct bluecard_info *info = link->priv;
+	int i, n;
+
+	link->config_index = 0x20;
+
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	link->resource[0]->end = 64;
+	link->io_lines = 6;
+
+	for (n = 0; n < 0x400; n += 0x40) {
+		link->resource[0]->start = n ^ 0x300;
+		i = pcmcia_request_io(link);
+		if (i == 0)
+			break;
+	}
+
+	if (i != 0)
+		goto failed;
+
+	i = pcmcia_request_irq(link, bluecard_interrupt);
+	if (i != 0)
+		goto failed;
+
+	i = pcmcia_enable_device(link);
+	if (i != 0)
+		goto failed;
+
+	if (bluecard_open(info) != 0)
+		goto failed;
+
+	return 0;
+
+failed:
+	bluecard_release(link);
+	return -ENODEV;
+}
+
+
+static void bluecard_release(struct pcmcia_device *link)
+{
+	struct bluecard_info *info = link->priv;
+
+	bluecard_close(info);
+
+	del_timer_sync(&(info->timer));
+
+	pcmcia_disable_device(link);
+}
+
+static const struct pcmcia_device_id bluecard_ids[] = {
+	PCMCIA_DEVICE_PROD_ID12("BlueCard", "LSE041", 0xbaf16fbf, 0x657cc15e),
+	PCMCIA_DEVICE_PROD_ID12("BTCFCARD", "LSE139", 0xe3987764, 0x2524b59c),
+	PCMCIA_DEVICE_PROD_ID12("WSS", "LSE039", 0x0a0736ec, 0x24e6dfab),
+	PCMCIA_DEVICE_NULL
+};
+MODULE_DEVICE_TABLE(pcmcia, bluecard_ids);
+
+static struct pcmcia_driver bluecard_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "bluecard_cs",
+	.probe		= bluecard_probe,
+	.remove		= bluecard_detach,
+	.id_table	= bluecard_ids,
+};
+module_pcmcia_driver(bluecard_driver);
diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c
new file mode 100644
index 000000000..1fa58c059
--- /dev/null
+++ b/drivers/bluetooth/bpa10x.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Digianswer Bluetooth USB driver
+ *
+ *  Copyright (C) 2004-2007  Marcel Holtmann <marcel@holtmann.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+
+#include <linux/usb.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "h4_recv.h"
+
+#define VERSION "0.11"
+
+static const struct usb_device_id bpa10x_table[] = {
+	/* Tektronix BPA 100/105 (Digianswer) */
+	{ USB_DEVICE(0x08fd, 0x0002) },
+
+	{ }	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, bpa10x_table);
+
+struct bpa10x_data {
+	struct hci_dev    *hdev;
+	struct usb_device *udev;
+
+	struct usb_anchor tx_anchor;
+	struct usb_anchor rx_anchor;
+
+	struct sk_buff *rx_skb[2];
+};
+
+static void bpa10x_tx_complete(struct urb *urb)
+{
+	struct sk_buff *skb = urb->context;
+	struct hci_dev *hdev = (struct hci_dev *) skb->dev;
+
+	BT_DBG("%s urb %p status %d count %d", hdev->name,
+					urb, urb->status, urb->actual_length);
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		goto done;
+
+	if (!urb->status)
+		hdev->stat.byte_tx += urb->transfer_buffer_length;
+	else
+		hdev->stat.err_tx++;
+
+done:
+	kfree(urb->setup_packet);
+
+	kfree_skb(skb);
+}
+
+#define HCI_VENDOR_HDR_SIZE 5
+
+#define HCI_RECV_VENDOR \
+	.type = HCI_VENDOR_PKT, \
+	.hlen = HCI_VENDOR_HDR_SIZE, \
+	.loff = 3, \
+	.lsize = 2, \
+	.maxlen = HCI_MAX_FRAME_SIZE
+
+static const struct h4_recv_pkt bpa10x_recv_pkts[] = {
+	{ H4_RECV_ACL,     .recv = hci_recv_frame },
+	{ H4_RECV_SCO,     .recv = hci_recv_frame },
+	{ H4_RECV_EVENT,   .recv = hci_recv_frame },
+	{ HCI_RECV_VENDOR, .recv = hci_recv_diag  },
+};
+
+static void bpa10x_rx_complete(struct urb *urb)
+{
+	struct hci_dev *hdev = urb->context;
+	struct bpa10x_data *data = hci_get_drvdata(hdev);
+	int err;
+
+	BT_DBG("%s urb %p status %d count %d", hdev->name,
+					urb, urb->status, urb->actual_length);
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return;
+
+	if (urb->status == 0) {
+		bool idx = usb_pipebulk(urb->pipe);
+
+		data->rx_skb[idx] = h4_recv_buf(hdev, data->rx_skb[idx],
+						urb->transfer_buffer,
+						urb->actual_length,
+						bpa10x_recv_pkts,
+						ARRAY_SIZE(bpa10x_recv_pkts));
+		if (IS_ERR(data->rx_skb[idx])) {
+			bt_dev_err(hdev, "corrupted event packet");
+			hdev->stat.err_rx++;
+			data->rx_skb[idx] = NULL;
+		}
+	}
+
+	usb_anchor_urb(urb, &data->rx_anchor);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err < 0) {
+		bt_dev_err(hdev, "urb %p failed to resubmit (%d)", urb, -err);
+		usb_unanchor_urb(urb);
+	}
+}
+
+static inline int bpa10x_submit_intr_urb(struct hci_dev *hdev)
+{
+	struct bpa10x_data *data = hci_get_drvdata(hdev);
+	struct urb *urb;
+	unsigned char *buf;
+	unsigned int pipe;
+	int err, size = 16;
+
+	BT_DBG("%s", hdev->name);
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	pipe = usb_rcvintpipe(data->udev, 0x81);
+
+	usb_fill_int_urb(urb, data->udev, pipe, buf, size,
+						bpa10x_rx_complete, hdev, 1);
+
+	urb->transfer_flags |= URB_FREE_BUFFER;
+
+	usb_anchor_urb(urb, &data->rx_anchor);
+
+	err = usb_submit_urb(urb, GFP_KERNEL);
+	if (err < 0) {
+		bt_dev_err(hdev, "urb %p submission failed (%d)", urb, -err);
+		usb_unanchor_urb(urb);
+	}
+
+	usb_free_urb(urb);
+
+	return err;
+}
+
+static inline int bpa10x_submit_bulk_urb(struct hci_dev *hdev)
+{
+	struct bpa10x_data *data = hci_get_drvdata(hdev);
+	struct urb *urb;
+	unsigned char *buf;
+	unsigned int pipe;
+	int err, size = 64;
+
+	BT_DBG("%s", hdev->name);
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	pipe = usb_rcvbulkpipe(data->udev, 0x82);
+
+	usb_fill_bulk_urb(urb, data->udev, pipe,
+					buf, size, bpa10x_rx_complete, hdev);
+
+	urb->transfer_flags |= URB_FREE_BUFFER;
+
+	usb_anchor_urb(urb, &data->rx_anchor);
+
+	err = usb_submit_urb(urb, GFP_KERNEL);
+	if (err < 0) {
+		bt_dev_err(hdev, "urb %p submission failed (%d)", urb, -err);
+		usb_unanchor_urb(urb);
+	}
+
+	usb_free_urb(urb);
+
+	return err;
+}
+
+static int bpa10x_open(struct hci_dev *hdev)
+{
+	struct bpa10x_data *data = hci_get_drvdata(hdev);
+	int err;
+
+	BT_DBG("%s", hdev->name);
+
+	err = bpa10x_submit_intr_urb(hdev);
+	if (err < 0)
+		goto error;
+
+	err = bpa10x_submit_bulk_urb(hdev);
+	if (err < 0)
+		goto error;
+
+	return 0;
+
+error:
+	usb_kill_anchored_urbs(&data->rx_anchor);
+
+	return err;
+}
+
+static int bpa10x_close(struct hci_dev *hdev)
+{
+	struct bpa10x_data *data = hci_get_drvdata(hdev);
+
+	BT_DBG("%s", hdev->name);
+
+	usb_kill_anchored_urbs(&data->rx_anchor);
+
+	return 0;
+}
+
+static int bpa10x_flush(struct hci_dev *hdev)
+{
+	struct bpa10x_data *data = hci_get_drvdata(hdev);
+
+	BT_DBG("%s", hdev->name);
+
+	usb_kill_anchored_urbs(&data->tx_anchor);
+
+	return 0;
+}
+
+static int bpa10x_setup(struct hci_dev *hdev)
+{
+	static const u8 req[] = { 0x07 };
+	struct sk_buff *skb;
+
+	BT_DBG("%s", hdev->name);
+
+	/* Read revision string */
+	skb = __hci_cmd_sync(hdev, 0xfc0e, sizeof(req), req, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
+
+	hci_set_fw_info(hdev, "%s", skb->data + 1);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int bpa10x_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct bpa10x_data *data = hci_get_drvdata(hdev);
+	struct usb_ctrlrequest *dr;
+	struct urb *urb;
+	unsigned int pipe;
+	int err;
+
+	BT_DBG("%s", hdev->name);
+
+	skb->dev = (void *) hdev;
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+
+	/* Prepend skb with frame type */
+	*(u8 *)skb_push(skb, 1) = hci_skb_pkt_type(skb);
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		dr = kmalloc(sizeof(*dr), GFP_KERNEL);
+		if (!dr) {
+			usb_free_urb(urb);
+			return -ENOMEM;
+		}
+
+		dr->bRequestType = USB_TYPE_VENDOR;
+		dr->bRequest     = 0;
+		dr->wIndex       = 0;
+		dr->wValue       = 0;
+		dr->wLength      = __cpu_to_le16(skb->len);
+
+		pipe = usb_sndctrlpipe(data->udev, 0x00);
+
+		usb_fill_control_urb(urb, data->udev, pipe, (void *) dr,
+				skb->data, skb->len, bpa10x_tx_complete, skb);
+
+		hdev->stat.cmd_tx++;
+		break;
+
+	case HCI_ACLDATA_PKT:
+		pipe = usb_sndbulkpipe(data->udev, 0x02);
+
+		usb_fill_bulk_urb(urb, data->udev, pipe,
+				skb->data, skb->len, bpa10x_tx_complete, skb);
+
+		hdev->stat.acl_tx++;
+		break;
+
+	case HCI_SCODATA_PKT:
+		pipe = usb_sndbulkpipe(data->udev, 0x02);
+
+		usb_fill_bulk_urb(urb, data->udev, pipe,
+				skb->data, skb->len, bpa10x_tx_complete, skb);
+
+		hdev->stat.sco_tx++;
+		break;
+
+	default:
+		usb_free_urb(urb);
+		return -EILSEQ;
+	}
+
+	usb_anchor_urb(urb, &data->tx_anchor);
+
+	err = usb_submit_urb(urb, GFP_KERNEL);
+	if (err < 0) {
+		bt_dev_err(hdev, "urb %p submission failed", urb);
+		kfree(urb->setup_packet);
+		usb_unanchor_urb(urb);
+	}
+
+	usb_free_urb(urb);
+
+	return err;
+}
+
+static int bpa10x_set_diag(struct hci_dev *hdev, bool enable)
+{
+	const u8 req[] = { 0x00, enable };
+	struct sk_buff *skb;
+
+	BT_DBG("%s", hdev->name);
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return -ENETDOWN;
+
+	/* Enable sniffer operation */
+	skb = __hci_cmd_sync(hdev, 0xfc0e, sizeof(req), req, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int bpa10x_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	struct bpa10x_data *data;
+	struct hci_dev *hdev;
+	int err;
+
+	BT_DBG("intf %p id %p", intf, id);
+
+	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
+		return -ENODEV;
+
+	data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->udev = interface_to_usbdev(intf);
+
+	init_usb_anchor(&data->tx_anchor);
+	init_usb_anchor(&data->rx_anchor);
+
+	hdev = hci_alloc_dev();
+	if (!hdev)
+		return -ENOMEM;
+
+	hdev->bus = HCI_USB;
+	hci_set_drvdata(hdev, data);
+
+	data->hdev = hdev;
+
+	SET_HCIDEV_DEV(hdev, &intf->dev);
+
+	hdev->open     = bpa10x_open;
+	hdev->close    = bpa10x_close;
+	hdev->flush    = bpa10x_flush;
+	hdev->setup    = bpa10x_setup;
+	hdev->send     = bpa10x_send_frame;
+	hdev->set_diag = bpa10x_set_diag;
+
+	set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
+	err = hci_register_dev(hdev);
+	if (err < 0) {
+		hci_free_dev(hdev);
+		return err;
+	}
+
+	usb_set_intfdata(intf, data);
+
+	return 0;
+}
+
+static void bpa10x_disconnect(struct usb_interface *intf)
+{
+	struct bpa10x_data *data = usb_get_intfdata(intf);
+
+	BT_DBG("intf %p", intf);
+
+	if (!data)
+		return;
+
+	usb_set_intfdata(intf, NULL);
+
+	hci_unregister_dev(data->hdev);
+
+	hci_free_dev(data->hdev);
+	kfree_skb(data->rx_skb[0]);
+	kfree_skb(data->rx_skb[1]);
+}
+
+static struct usb_driver bpa10x_driver = {
+	.name		= "bpa10x",
+	.probe		= bpa10x_probe,
+	.disconnect	= bpa10x_disconnect,
+	.id_table	= bpa10x_table,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(bpa10x_driver);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Digianswer Bluetooth USB driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
new file mode 100644
index 000000000..547138339
--- /dev/null
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -0,0 +1,749 @@
+/*
+ *
+ *  Driver for the 3Com Bluetooth PCMCIA card
+ *
+ *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
+ *                           Jose Orlando Pereira <jop@di.uminho.pt>
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *  The initial developer of the original code is David A. Hinds
+ *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
+#include <linux/moduleparam.h>
+
+#include <linux/skbuff.h>
+#include <linux/string.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+
+#include <linux/device.h>
+#include <linux/firmware.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+
+
+/* ======================== Module parameters ======================== */
+
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("BT3CPCC.bin");
+
+
+
+/* ======================== Local structures ======================== */
+
+
+struct bt3c_info {
+	struct pcmcia_device *p_dev;
+
+	struct hci_dev *hdev;
+
+	spinlock_t lock;		/* For serializing operations */
+
+	struct sk_buff_head txq;
+	unsigned long tx_state;
+
+	unsigned long rx_state;
+	unsigned long rx_count;
+	struct sk_buff *rx_skb;
+};
+
+
+static int bt3c_config(struct pcmcia_device *link);
+static void bt3c_release(struct pcmcia_device *link);
+
+static void bt3c_detach(struct pcmcia_device *p_dev);
+
+
+/* Transmit states  */
+#define XMIT_SENDING  1
+#define XMIT_WAKEUP   2
+#define XMIT_WAITING  8
+
+/* Receiver states */
+#define RECV_WAIT_PACKET_TYPE   0
+#define RECV_WAIT_EVENT_HEADER  1
+#define RECV_WAIT_ACL_HEADER    2
+#define RECV_WAIT_SCO_HEADER    3
+#define RECV_WAIT_DATA          4
+
+
+
+/* ======================== Special I/O functions ======================== */
+
+
+#define DATA_L   0
+#define DATA_H   1
+#define ADDR_L   2
+#define ADDR_H   3
+#define CONTROL  4
+
+
+static inline void bt3c_address(unsigned int iobase, unsigned short addr)
+{
+	outb(addr & 0xff, iobase + ADDR_L);
+	outb((addr >> 8) & 0xff, iobase + ADDR_H);
+}
+
+
+static inline void bt3c_put(unsigned int iobase, unsigned short value)
+{
+	outb(value & 0xff, iobase + DATA_L);
+	outb((value >> 8) & 0xff, iobase + DATA_H);
+}
+
+
+static inline void bt3c_io_write(unsigned int iobase, unsigned short addr, unsigned short value)
+{
+	bt3c_address(iobase, addr);
+	bt3c_put(iobase, value);
+}
+
+
+static inline unsigned short bt3c_get(unsigned int iobase)
+{
+	unsigned short value = inb(iobase + DATA_L);
+
+	value |= inb(iobase + DATA_H) << 8;
+
+	return value;
+}
+
+
+static inline unsigned short bt3c_read(unsigned int iobase, unsigned short addr)
+{
+	bt3c_address(iobase, addr);
+
+	return bt3c_get(iobase);
+}
+
+
+
+/* ======================== Interrupt handling ======================== */
+
+
+static int bt3c_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
+{
+	int actual = 0;
+
+	bt3c_address(iobase, 0x7080);
+
+	/* Fill FIFO with current frame */
+	while (actual < len) {
+		/* Transmit next byte */
+		bt3c_put(iobase, buf[actual]);
+		actual++;
+	}
+
+	bt3c_io_write(iobase, 0x7005, actual);
+
+	return actual;
+}
+
+
+static void bt3c_write_wakeup(struct bt3c_info *info)
+{
+	if (!info) {
+		BT_ERR("Unknown device");
+		return;
+	}
+
+	if (test_and_set_bit(XMIT_SENDING, &(info->tx_state)))
+		return;
+
+	do {
+		unsigned int iobase = info->p_dev->resource[0]->start;
+		register struct sk_buff *skb;
+		int len;
+
+		if (!pcmcia_dev_present(info->p_dev))
+			break;
+
+		skb = skb_dequeue(&(info->txq));
+		if (!skb) {
+			clear_bit(XMIT_SENDING, &(info->tx_state));
+			break;
+		}
+
+		/* Send frame */
+		len = bt3c_write(iobase, 256, skb->data, skb->len);
+
+		if (len != skb->len)
+			BT_ERR("Very strange");
+
+		kfree_skb(skb);
+
+		info->hdev->stat.byte_tx += len;
+
+	} while (0);
+}
+
+
+static void bt3c_receive(struct bt3c_info *info)
+{
+	unsigned int iobase;
+	int size = 0, avail;
+
+	if (!info) {
+		BT_ERR("Unknown device");
+		return;
+	}
+
+	iobase = info->p_dev->resource[0]->start;
+
+	avail = bt3c_read(iobase, 0x7006);
+
+	bt3c_address(iobase, 0x7480);
+	while (size < avail) {
+		size++;
+		info->hdev->stat.byte_rx++;
+
+		/* Allocate packet */
+		if (!info->rx_skb) {
+			info->rx_state = RECV_WAIT_PACKET_TYPE;
+			info->rx_count = 0;
+			info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+			if (!info->rx_skb) {
+				BT_ERR("Can't allocate mem for new packet");
+				return;
+			}
+		}
+
+
+		if (info->rx_state == RECV_WAIT_PACKET_TYPE) {
+
+			hci_skb_pkt_type(info->rx_skb) = inb(iobase + DATA_L);
+			inb(iobase + DATA_H);
+
+			switch (hci_skb_pkt_type(info->rx_skb)) {
+
+			case HCI_EVENT_PKT:
+				info->rx_state = RECV_WAIT_EVENT_HEADER;
+				info->rx_count = HCI_EVENT_HDR_SIZE;
+				break;
+
+			case HCI_ACLDATA_PKT:
+				info->rx_state = RECV_WAIT_ACL_HEADER;
+				info->rx_count = HCI_ACL_HDR_SIZE;
+				break;
+
+			case HCI_SCODATA_PKT:
+				info->rx_state = RECV_WAIT_SCO_HEADER;
+				info->rx_count = HCI_SCO_HDR_SIZE;
+				break;
+
+			default:
+				/* Unknown packet */
+				BT_ERR("Unknown HCI packet with type 0x%02x received",
+				       hci_skb_pkt_type(info->rx_skb));
+				info->hdev->stat.err_rx++;
+
+				kfree_skb(info->rx_skb);
+				info->rx_skb = NULL;
+				break;
+
+			}
+
+		} else {
+
+			__u8 x = inb(iobase + DATA_L);
+
+			skb_put_u8(info->rx_skb, x);
+			inb(iobase + DATA_H);
+			info->rx_count--;
+
+			if (info->rx_count == 0) {
+
+				int dlen;
+				struct hci_event_hdr *eh;
+				struct hci_acl_hdr *ah;
+				struct hci_sco_hdr *sh;
+
+				switch (info->rx_state) {
+
+				case RECV_WAIT_EVENT_HEADER:
+					eh = hci_event_hdr(info->rx_skb);
+					info->rx_state = RECV_WAIT_DATA;
+					info->rx_count = eh->plen;
+					break;
+
+				case RECV_WAIT_ACL_HEADER:
+					ah = hci_acl_hdr(info->rx_skb);
+					dlen = __le16_to_cpu(ah->dlen);
+					info->rx_state = RECV_WAIT_DATA;
+					info->rx_count = dlen;
+					break;
+
+				case RECV_WAIT_SCO_HEADER:
+					sh = hci_sco_hdr(info->rx_skb);
+					info->rx_state = RECV_WAIT_DATA;
+					info->rx_count = sh->dlen;
+					break;
+
+				case RECV_WAIT_DATA:
+					hci_recv_frame(info->hdev, info->rx_skb);
+					info->rx_skb = NULL;
+					break;
+
+				}
+
+			}
+
+		}
+
+	}
+
+	bt3c_io_write(iobase, 0x7006, 0x0000);
+}
+
+
+static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
+{
+	struct bt3c_info *info = dev_inst;
+	unsigned int iobase;
+	int iir;
+	irqreturn_t r = IRQ_NONE;
+
+	if (!info || !info->hdev)
+		/* our irq handler is shared */
+		return IRQ_NONE;
+
+	iobase = info->p_dev->resource[0]->start;
+
+	spin_lock(&(info->lock));
+
+	iir = inb(iobase + CONTROL);
+	if (iir & 0x80) {
+		int stat = bt3c_read(iobase, 0x7001);
+
+		if ((stat & 0xff) == 0x7f) {
+			BT_ERR("Very strange (stat=0x%04x)", stat);
+		} else if ((stat & 0xff) != 0xff) {
+			if (stat & 0x0020) {
+				int status = bt3c_read(iobase, 0x7002) & 0x10;
+				bt_dev_info(info->hdev, "Antenna %s",
+							status ? "out" : "in");
+			}
+			if (stat & 0x0001)
+				bt3c_receive(info);
+			if (stat & 0x0002) {
+				clear_bit(XMIT_SENDING, &(info->tx_state));
+				bt3c_write_wakeup(info);
+			}
+
+			bt3c_io_write(iobase, 0x7001, 0x0000);
+
+			outb(iir, iobase + CONTROL);
+		}
+		r = IRQ_HANDLED;
+	}
+
+	spin_unlock(&(info->lock));
+
+	return r;
+}
+
+
+
+/* ======================== HCI interface ======================== */
+
+
+static int bt3c_hci_flush(struct hci_dev *hdev)
+{
+	struct bt3c_info *info = hci_get_drvdata(hdev);
+
+	/* Drop TX queue */
+	skb_queue_purge(&(info->txq));
+
+	return 0;
+}
+
+
+static int bt3c_hci_open(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+
+static int bt3c_hci_close(struct hci_dev *hdev)
+{
+	bt3c_hci_flush(hdev);
+
+	return 0;
+}
+
+
+static int bt3c_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct bt3c_info *info = hci_get_drvdata(hdev);
+	unsigned long flags;
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+	}
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+	skb_queue_tail(&(info->txq), skb);
+
+	spin_lock_irqsave(&(info->lock), flags);
+
+	bt3c_write_wakeup(info);
+
+	spin_unlock_irqrestore(&(info->lock), flags);
+
+	return 0;
+}
+
+
+
+/* ======================== Card services HCI interaction ======================== */
+
+
+static int bt3c_load_firmware(struct bt3c_info *info,
+			      const unsigned char *firmware,
+			      int count)
+{
+	char *ptr = (char *) firmware;
+	char b[9];
+	unsigned int iobase, tmp, tn;
+	unsigned long size, addr, fcs;
+	int i, err = 0;
+
+	iobase = info->p_dev->resource[0]->start;
+
+	/* Reset */
+	bt3c_io_write(iobase, 0x8040, 0x0404);
+	bt3c_io_write(iobase, 0x8040, 0x0400);
+
+	udelay(1);
+
+	bt3c_io_write(iobase, 0x8040, 0x0404);
+
+	udelay(17);
+
+	/* Load */
+	while (count) {
+		if (ptr[0] != 'S') {
+			BT_ERR("Bad address in firmware");
+			err = -EFAULT;
+			goto error;
+		}
+
+		memset(b, 0, sizeof(b));
+		memcpy(b, ptr + 2, 2);
+		if (kstrtoul(b, 16, &size) < 0)
+			return -EINVAL;
+
+		memset(b, 0, sizeof(b));
+		memcpy(b, ptr + 4, 8);
+		if (kstrtoul(b, 16, &addr) < 0)
+			return -EINVAL;
+
+		memset(b, 0, sizeof(b));
+		memcpy(b, ptr + (size * 2) + 2, 2);
+		if (kstrtoul(b, 16, &fcs) < 0)
+			return -EINVAL;
+
+		memset(b, 0, sizeof(b));
+		for (tmp = 0, i = 0; i < size; i++) {
+			memcpy(b, ptr + (i * 2) + 2, 2);
+			if (kstrtouint(b, 16, &tn))
+				return -EINVAL;
+			tmp += tn;
+		}
+
+		if (((tmp + fcs) & 0xff) != 0xff) {
+			BT_ERR("Checksum error in firmware");
+			err = -EILSEQ;
+			goto error;
+		}
+
+		if (ptr[1] == '3') {
+			bt3c_address(iobase, addr);
+
+			memset(b, 0, sizeof(b));
+			for (i = 0; i < (size - 4) / 2; i++) {
+				memcpy(b, ptr + (i * 4) + 12, 4);
+				if (kstrtouint(b, 16, &tmp))
+					return -EINVAL;
+				bt3c_put(iobase, tmp);
+			}
+		}
+
+		ptr   += (size * 2) + 6;
+		count -= (size * 2) + 6;
+	}
+
+	udelay(17);
+
+	/* Boot */
+	bt3c_address(iobase, 0x3000);
+	outb(inb(iobase + CONTROL) | 0x40, iobase + CONTROL);
+
+error:
+	udelay(17);
+
+	/* Clear */
+	bt3c_io_write(iobase, 0x7006, 0x0000);
+	bt3c_io_write(iobase, 0x7005, 0x0000);
+	bt3c_io_write(iobase, 0x7001, 0x0000);
+
+	return err;
+}
+
+
+static int bt3c_open(struct bt3c_info *info)
+{
+	const struct firmware *firmware;
+	struct hci_dev *hdev;
+	int err;
+
+	spin_lock_init(&(info->lock));
+
+	skb_queue_head_init(&(info->txq));
+
+	info->rx_state = RECV_WAIT_PACKET_TYPE;
+	info->rx_count = 0;
+	info->rx_skb = NULL;
+
+	/* Initialize HCI device */
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Can't allocate HCI device");
+		return -ENOMEM;
+	}
+
+	info->hdev = hdev;
+
+	hdev->bus = HCI_PCCARD;
+	hci_set_drvdata(hdev, info);
+	SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
+
+	hdev->open  = bt3c_hci_open;
+	hdev->close = bt3c_hci_close;
+	hdev->flush = bt3c_hci_flush;
+	hdev->send  = bt3c_hci_send_frame;
+
+	/* Load firmware */
+	err = request_firmware(&firmware, "BT3CPCC.bin", &info->p_dev->dev);
+	if (err < 0) {
+		BT_ERR("Firmware request failed");
+		goto error;
+	}
+
+	err = bt3c_load_firmware(info, firmware->data, firmware->size);
+
+	release_firmware(firmware);
+
+	if (err < 0) {
+		BT_ERR("Firmware loading failed");
+		goto error;
+	}
+
+	/* Timeout before it is safe to send the first HCI packet */
+	msleep(1000);
+
+	/* Register HCI device */
+	err = hci_register_dev(hdev);
+	if (err < 0) {
+		BT_ERR("Can't register HCI device");
+		goto error;
+	}
+
+	return 0;
+
+error:
+	info->hdev = NULL;
+	hci_free_dev(hdev);
+	return err;
+}
+
+
+static int bt3c_close(struct bt3c_info *info)
+{
+	struct hci_dev *hdev = info->hdev;
+
+	if (!hdev)
+		return -ENODEV;
+
+	bt3c_hci_close(hdev);
+
+	hci_unregister_dev(hdev);
+	hci_free_dev(hdev);
+
+	return 0;
+}
+
+static int bt3c_probe(struct pcmcia_device *link)
+{
+	struct bt3c_info *info;
+
+	/* Create new info device */
+	info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->p_dev = link;
+	link->priv = info;
+
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
+		CONF_AUTO_SET_IO;
+
+	return bt3c_config(link);
+}
+
+
+static void bt3c_detach(struct pcmcia_device *link)
+{
+	bt3c_release(link);
+}
+
+static int bt3c_check_config(struct pcmcia_device *p_dev, void *priv_data)
+{
+	int *try = priv_data;
+
+	if (!try)
+		p_dev->io_lines = 16;
+
+	if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0))
+		return -EINVAL;
+
+	p_dev->resource[0]->end = 8;
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+
+	return pcmcia_request_io(p_dev);
+}
+
+static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
+				      void *priv_data)
+{
+	static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+	int j;
+
+	if (p_dev->io_lines > 3)
+		return -ENODEV;
+
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	p_dev->resource[0]->end = 8;
+
+	for (j = 0; j < 5; j++) {
+		p_dev->resource[0]->start = base[j];
+		p_dev->io_lines = base[j] ? 16 : 3;
+		if (!pcmcia_request_io(p_dev))
+			return 0;
+	}
+	return -ENODEV;
+}
+
+static int bt3c_config(struct pcmcia_device *link)
+{
+	struct bt3c_info *info = link->priv;
+	int i;
+	unsigned long try;
+
+	/* First pass: look for a config entry that looks normal.
+	 * Two tries: without IO aliases, then with aliases
+	 */
+	for (try = 0; try < 2; try++)
+		if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try))
+			goto found_port;
+
+	/* Second pass: try to find an entry that isn't picky about
+	 * its base address, then try to grab any standard serial port
+	 * address, and finally try to get any free port.
+	 */
+	if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL))
+		goto found_port;
+
+	BT_ERR("No usable port range found");
+	goto failed;
+
+found_port:
+	i = pcmcia_request_irq(link, &bt3c_interrupt);
+	if (i != 0)
+		goto failed;
+
+	i = pcmcia_enable_device(link);
+	if (i != 0)
+		goto failed;
+
+	if (bt3c_open(info) != 0)
+		goto failed;
+
+	return 0;
+
+failed:
+	bt3c_release(link);
+	return -ENODEV;
+}
+
+
+static void bt3c_release(struct pcmcia_device *link)
+{
+	struct bt3c_info *info = link->priv;
+
+	bt3c_close(info);
+
+	pcmcia_disable_device(link);
+}
+
+
+static const struct pcmcia_device_id bt3c_ids[] = {
+	PCMCIA_DEVICE_PROD_ID13("3COM", "Bluetooth PC Card", 0xefce0a31, 0xd4ce9b02),
+	PCMCIA_DEVICE_NULL
+};
+MODULE_DEVICE_TABLE(pcmcia, bt3c_ids);
+
+static struct pcmcia_driver bt3c_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "bt3c_cs",
+	.probe		= bt3c_probe,
+	.remove		= bt3c_detach,
+	.id_table	= bt3c_ids,
+};
+module_pcmcia_driver(bt3c_driver);
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
new file mode 100644
index 000000000..de2ea589a
--- /dev/null
+++ b/drivers/bluetooth/btbcm.c
@@ -0,0 +1,781 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Bluetooth support for Broadcom devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ */
+
+#include <linux/efi.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/dmi.h>
+#include <linux/of.h>
+#include <asm/unaligned.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btbcm.h"
+
+#define VERSION "0.1"
+
+#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
+#define BDADDR_BCM20702A1 (&(bdaddr_t) {{0x00, 0x00, 0xa0, 0x02, 0x70, 0x20}})
+#define BDADDR_BCM2076B1 (&(bdaddr_t) {{0x79, 0x56, 0x00, 0xa0, 0x76, 0x20}})
+#define BDADDR_BCM43430A0 (&(bdaddr_t) {{0xac, 0x1f, 0x12, 0xa0, 0x43, 0x43}})
+#define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}})
+#define BDADDR_BCM4330B1 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb1, 0x30, 0x43}})
+#define BDADDR_BCM4334B0 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb0, 0x34, 0x43}})
+#define BDADDR_BCM4345C5 (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0xc5, 0x45, 0x43}})
+#define BDADDR_BCM43341B (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0x1b, 0x34, 0x43}})
+
+#define BCM_FW_NAME_LEN			64
+#define BCM_FW_NAME_COUNT_MAX		4
+/* For kmalloc-ing the fw-name array instead of putting it on the stack */
+typedef char bcm_fw_name[BCM_FW_NAME_LEN];
+
+#ifdef CONFIG_EFI
+static int btbcm_set_bdaddr_from_efi(struct hci_dev *hdev)
+{
+	efi_guid_t guid = EFI_GUID(0x74b00bd9, 0x805a, 0x4d61, 0xb5, 0x1f,
+				   0x43, 0x26, 0x81, 0x23, 0xd1, 0x13);
+	bdaddr_t efi_bdaddr, bdaddr;
+	efi_status_t status;
+	unsigned long len;
+	int ret;
+
+	if (!efi_rt_services_supported(EFI_RT_SUPPORTED_GET_VARIABLE))
+		return -EOPNOTSUPP;
+
+	len = sizeof(efi_bdaddr);
+	status = efi.get_variable(L"BDADDR", &guid, NULL, &len, &efi_bdaddr);
+	if (status != EFI_SUCCESS)
+		return -ENXIO;
+
+	if (len != sizeof(efi_bdaddr))
+		return -EIO;
+
+	baswap(&bdaddr, &efi_bdaddr);
+
+	ret = btbcm_set_bdaddr(hdev, &bdaddr);
+	if (ret)
+		return ret;
+
+	bt_dev_info(hdev, "BCM: Using EFI device address (%pMR)", &bdaddr);
+	return 0;
+}
+#else
+static int btbcm_set_bdaddr_from_efi(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
+#endif
+
+int btbcm_check_bdaddr(struct hci_dev *hdev)
+{
+	struct hci_rp_read_bd_addr *bda;
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+
+		bt_dev_err(hdev, "BCM: Reading device address failed (%d)", err);
+		return err;
+	}
+
+	if (skb->len != sizeof(*bda)) {
+		bt_dev_err(hdev, "BCM: Device address length mismatch");
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	bda = (struct hci_rp_read_bd_addr *)skb->data;
+
+	/* Check if the address indicates a controller with either an
+	 * invalid or default address. In both cases the device needs
+	 * to be marked as not having a valid address.
+	 *
+	 * The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
+	 * with no configured address.
+	 *
+	 * The address 20:70:02:A0:00:00 indicates a BCM20702A1 controller
+	 * with no configured address.
+	 *
+	 * The address 20:76:A0:00:56:79 indicates a BCM2076B1 controller
+	 * with no configured address.
+	 *
+	 * The address 43:24:B3:00:00:00 indicates a BCM4324B3 controller
+	 * with waiting for configuration state.
+	 *
+	 * The address 43:30:B1:00:00:00 indicates a BCM4330B1 controller
+	 * with waiting for configuration state.
+	 *
+	 * The address 43:43:A0:12:1F:AC indicates a BCM43430A0 controller
+	 * with no configured address.
+	 */
+	if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM20702A1) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM2076B1) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM4324B3) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM4330B1) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM4334B0) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM4345C5) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM43430A0) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM43341B)) {
+		/* Try falling back to BDADDR EFI variable */
+		if (btbcm_set_bdaddr_from_efi(hdev) != 0) {
+			bt_dev_info(hdev, "BCM: Using default device address (%pMR)",
+				    &bda->bdaddr);
+			set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+		}
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_check_bdaddr);
+
+int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "BCM: Change address command failed (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_set_bdaddr);
+
+int btbcm_read_pcm_int_params(struct hci_dev *hdev,
+			      struct bcm_set_pcm_int_params *params)
+{
+	struct sk_buff *skb;
+	int err = 0;
+
+	skb = __hci_cmd_sync(hdev, 0xfc1d, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "BCM: Read PCM int params failed (%d)", err);
+		return err;
+	}
+
+	if (skb->len != 6 || skb->data[0]) {
+		bt_dev_err(hdev, "BCM: Read PCM int params length mismatch");
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	if (params)
+		memcpy(params, skb->data + 1, 5);
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_read_pcm_int_params);
+
+int btbcm_write_pcm_int_params(struct hci_dev *hdev,
+			       const struct bcm_set_pcm_int_params *params)
+{
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync(hdev, 0xfc1c, 5, params, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "BCM: Write PCM int params failed (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_write_pcm_int_params);
+
+int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
+{
+	const struct hci_command_hdr *cmd;
+	const u8 *fw_ptr;
+	size_t fw_size;
+	struct sk_buff *skb;
+	u16 opcode;
+	int err = 0;
+
+	/* Start Download */
+	skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "BCM: Download Minidrv command failed (%d)",
+			   err);
+		goto done;
+	}
+	kfree_skb(skb);
+
+	/* 50 msec delay after Download Minidrv completes */
+	msleep(50);
+
+	fw_ptr = fw->data;
+	fw_size = fw->size;
+
+	while (fw_size >= sizeof(*cmd)) {
+		const u8 *cmd_param;
+
+		cmd = (struct hci_command_hdr *)fw_ptr;
+		fw_ptr += sizeof(*cmd);
+		fw_size -= sizeof(*cmd);
+
+		if (fw_size < cmd->plen) {
+			bt_dev_err(hdev, "BCM: Patch is corrupted");
+			err = -EINVAL;
+			goto done;
+		}
+
+		cmd_param = fw_ptr;
+		fw_ptr += cmd->plen;
+		fw_size -= cmd->plen;
+
+		opcode = le16_to_cpu(cmd->opcode);
+
+		skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param,
+				     HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			err = PTR_ERR(skb);
+			bt_dev_err(hdev, "BCM: Patch command %04x failed (%d)",
+				   opcode, err);
+			goto done;
+		}
+		kfree_skb(skb);
+	}
+
+	/* 250 msec delay after Launch Ram completes */
+	msleep(250);
+
+done:
+	return err;
+}
+EXPORT_SYMBOL(btbcm_patchram);
+
+static int btbcm_reset(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+
+		bt_dev_err(hdev, "BCM: Reset failed (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	/* 100 msec delay for module to complete reset process */
+	msleep(100);
+
+	return 0;
+}
+
+static struct sk_buff *btbcm_read_local_name(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_NAME, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "BCM: Reading local name failed (%ld)",
+			   PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != sizeof(struct hci_rp_read_local_name)) {
+		bt_dev_err(hdev, "BCM: Local name length mismatch");
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
+static struct sk_buff *btbcm_read_local_version(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "BCM: Reading local version info failed (%ld)",
+			   PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != sizeof(struct hci_rp_read_local_version)) {
+		bt_dev_err(hdev, "BCM: Local version length mismatch");
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
+static struct sk_buff *btbcm_read_verbose_config(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, 0xfc79, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "BCM: Read verbose config info failed (%ld)",
+			   PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != 7) {
+		bt_dev_err(hdev, "BCM: Verbose config length mismatch");
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
+static struct sk_buff *btbcm_read_controller_features(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, 0xfc6e, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "BCM: Read controller features failed (%ld)",
+			   PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != 9) {
+		bt_dev_err(hdev, "BCM: Controller features length mismatch");
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
+static struct sk_buff *btbcm_read_usb_product(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, 0xfc5a, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "BCM: Read USB product info failed (%ld)",
+			   PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != 5) {
+		bt_dev_err(hdev, "BCM: USB product length mismatch");
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
+static const struct dmi_system_id disable_broken_read_transmit_power[] = {
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro16,1"),
+		},
+	},
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro16,2"),
+		},
+	},
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro16,4"),
+		},
+	},
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir8,1"),
+		},
+	},
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir8,2"),
+		},
+	},
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "iMac20,1"),
+		},
+	},
+	{
+		 .matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "iMac20,2"),
+		},
+	},
+	{ }
+};
+
+static int btbcm_read_info(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	/* Read Verbose Config Version Info */
+	skb = btbcm_read_verbose_config(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	bt_dev_info(hdev, "BCM: chip id %u", skb->data[1]);
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int btbcm_print_controller_features(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	/* Read Controller Features */
+	skb = btbcm_read_controller_features(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	bt_dev_info(hdev, "BCM: features 0x%2.2x", skb->data[1]);
+	kfree_skb(skb);
+
+	/* Read DMI and disable broken Read LE Min/Max Tx Power */
+	if (dmi_first_match(disable_broken_read_transmit_power))
+		set_bit(HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, &hdev->quirks);
+
+	return 0;
+}
+
+static int btbcm_print_local_name(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	/* Read Local Name */
+	skb = btbcm_read_local_name(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
+	kfree_skb(skb);
+
+	return 0;
+}
+
+struct bcm_subver_table {
+	u16 subver;
+	const char *name;
+};
+
+static const struct bcm_subver_table bcm_uart_subver_table[] = {
+	{ 0x1111, "BCM4362A2"	},	/* 000.017.017 */
+	{ 0x4103, "BCM4330B1"	},	/* 002.001.003 */
+	{ 0x410d, "BCM4334B0"	},	/* 002.001.013 */
+	{ 0x410e, "BCM43341B0"	},	/* 002.001.014 */
+	{ 0x4204, "BCM2076B1"	},	/* 002.002.004 */
+	{ 0x4406, "BCM4324B3"	},	/* 002.004.006 */
+	{ 0x4606, "BCM4324B5"	},	/* 002.006.006 */
+	{ 0x6109, "BCM4335C0"	},	/* 003.001.009 */
+	{ 0x610c, "BCM4354"	},	/* 003.001.012 */
+	{ 0x2122, "BCM4343A0"	},	/* 001.001.034 */
+	{ 0x2209, "BCM43430A1"  },	/* 001.002.009 */
+	{ 0x6119, "BCM4345C0"	},	/* 003.001.025 */
+	{ 0x6606, "BCM4345C5"	},	/* 003.006.006 */
+	{ 0x230f, "BCM4356A2"	},	/* 001.003.015 */
+	{ 0x220e, "BCM20702A1"  },	/* 001.002.014 */
+	{ 0x420d, "BCM4349B1"	},	/* 002.002.013 */
+	{ 0x420e, "BCM4349B1"	},	/* 002.002.014 */
+	{ 0x4217, "BCM4329B1"   },	/* 002.002.023 */
+	{ 0x6106, "BCM4359C0"	},	/* 003.001.006 */
+	{ 0x4106, "BCM4335A0"	},	/* 002.001.006 */
+	{ 0x410c, "BCM43430B0"	},	/* 002.001.012 */
+	{ 0x2119, "BCM4373A0"	},	/* 001.001.025 */
+	{ }
+};
+
+static const struct bcm_subver_table bcm_usb_subver_table[] = {
+	{ 0x2105, "BCM20703A1"	},	/* 001.001.005 */
+	{ 0x210b, "BCM43142A0"	},	/* 001.001.011 */
+	{ 0x2112, "BCM4314A0"	},	/* 001.001.018 */
+	{ 0x2118, "BCM20702A0"	},	/* 001.001.024 */
+	{ 0x2126, "BCM4335A0"	},	/* 001.001.038 */
+	{ 0x220e, "BCM20702A1"	},	/* 001.002.014 */
+	{ 0x230f, "BCM4356A2"	},	/* 001.003.015 */
+	{ 0x4106, "BCM4335B0"	},	/* 002.001.006 */
+	{ 0x410e, "BCM20702B0"	},	/* 002.001.014 */
+	{ 0x6109, "BCM4335C0"	},	/* 003.001.009 */
+	{ 0x610c, "BCM4354"	},	/* 003.001.012 */
+	{ 0x6607, "BCM4350C5"	},	/* 003.006.007 */
+	{ }
+};
+
+/*
+ * This currently only looks up the device tree board appendix,
+ * but can be expanded to other mechanisms.
+ */
+static const char *btbcm_get_board_name(struct device *dev)
+{
+#ifdef CONFIG_OF
+	struct device_node *root;
+	char *board_type;
+	const char *tmp;
+	int len;
+	int i;
+
+	root = of_find_node_by_path("/");
+	if (!root)
+		return NULL;
+
+	if (of_property_read_string_index(root, "compatible", 0, &tmp))
+		return NULL;
+
+	/* get rid of any '/' in the compatible string */
+	len = strlen(tmp) + 1;
+	board_type = devm_kzalloc(dev, len, GFP_KERNEL);
+	strscpy(board_type, tmp, len);
+	for (i = 0; i < len; i++) {
+		if (board_type[i] == '/')
+			board_type[i] = '-';
+	}
+	of_node_put(root);
+
+	return board_type;
+#else
+	return NULL;
+#endif
+}
+
+int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done, bool use_autobaud_mode)
+{
+	u16 subver, rev, pid, vid;
+	struct sk_buff *skb;
+	struct hci_rp_read_local_version *ver;
+	const struct bcm_subver_table *bcm_subver_table;
+	const char *hw_name = NULL;
+	const char *board_name;
+	char postfix[16] = "";
+	int fw_name_count = 0;
+	bcm_fw_name *fw_name;
+	const struct firmware *fw;
+	int i, err;
+
+	board_name = btbcm_get_board_name(&hdev->dev);
+
+	/* Reset */
+	err = btbcm_reset(hdev);
+	if (err)
+		return err;
+
+	/* Read Local Version Info */
+	skb = btbcm_read_local_version(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	ver = (struct hci_rp_read_local_version *)skb->data;
+	rev = le16_to_cpu(ver->hci_rev);
+	subver = le16_to_cpu(ver->lmp_subver);
+	kfree_skb(skb);
+
+	/* Read controller information */
+	if (!(*fw_load_done)) {
+		err = btbcm_read_info(hdev);
+		if (err)
+			return err;
+	}
+
+	if (!use_autobaud_mode) {
+		err = btbcm_print_controller_features(hdev);
+		if (err)
+			return err;
+
+		err = btbcm_print_local_name(hdev);
+		if (err)
+			return err;
+	}
+
+	bcm_subver_table = (hdev->bus == HCI_USB) ? bcm_usb_subver_table :
+						    bcm_uart_subver_table;
+
+	for (i = 0; bcm_subver_table[i].name; i++) {
+		if (subver == bcm_subver_table[i].subver) {
+			hw_name = bcm_subver_table[i].name;
+			break;
+		}
+	}
+
+	bt_dev_info(hdev, "%s (%3.3u.%3.3u.%3.3u) build %4.4u",
+		    hw_name ? hw_name : "BCM", (subver & 0xe000) >> 13,
+		    (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
+
+	if (*fw_load_done)
+		return 0;
+
+	if (hdev->bus == HCI_USB) {
+		/* Read USB Product Info */
+		skb = btbcm_read_usb_product(hdev);
+		if (IS_ERR(skb))
+			return PTR_ERR(skb);
+
+		vid = get_unaligned_le16(skb->data + 1);
+		pid = get_unaligned_le16(skb->data + 3);
+		kfree_skb(skb);
+
+		snprintf(postfix, sizeof(postfix), "-%4.4x-%4.4x", vid, pid);
+	}
+
+	fw_name = kmalloc(BCM_FW_NAME_COUNT_MAX * BCM_FW_NAME_LEN, GFP_KERNEL);
+	if (!fw_name)
+		return -ENOMEM;
+
+	if (hw_name) {
+		if (board_name) {
+			snprintf(fw_name[fw_name_count], BCM_FW_NAME_LEN,
+				 "brcm/%s%s.%s.hcd", hw_name, postfix, board_name);
+			fw_name_count++;
+		}
+		snprintf(fw_name[fw_name_count], BCM_FW_NAME_LEN,
+			 "brcm/%s%s.hcd", hw_name, postfix);
+		fw_name_count++;
+	}
+
+	if (board_name) {
+		snprintf(fw_name[fw_name_count], BCM_FW_NAME_LEN,
+			 "brcm/BCM%s.%s.hcd", postfix, board_name);
+		fw_name_count++;
+	}
+	snprintf(fw_name[fw_name_count], BCM_FW_NAME_LEN,
+		 "brcm/BCM%s.hcd", postfix);
+	fw_name_count++;
+
+	for (i = 0; i < fw_name_count; i++) {
+		err = firmware_request_nowarn(&fw, fw_name[i], &hdev->dev);
+		if (err == 0) {
+			bt_dev_info(hdev, "%s '%s' Patch",
+				    hw_name ? hw_name : "BCM", fw_name[i]);
+			*fw_load_done = true;
+			break;
+		}
+	}
+
+	if (*fw_load_done) {
+		err = btbcm_patchram(hdev, fw);
+		if (err)
+			bt_dev_info(hdev, "BCM: Patch failed (%d)", err);
+
+		release_firmware(fw);
+	} else {
+		bt_dev_err(hdev, "BCM: firmware Patch file not found, tried:");
+		for (i = 0; i < fw_name_count; i++)
+			bt_dev_err(hdev, "BCM: '%s'", fw_name[i]);
+	}
+
+	kfree(fw_name);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_initialize);
+
+int btbcm_finalize(struct hci_dev *hdev, bool *fw_load_done, bool use_autobaud_mode)
+{
+	int err;
+
+	/* Re-initialize if necessary */
+	if (*fw_load_done) {
+		err = btbcm_initialize(hdev, fw_load_done, use_autobaud_mode);
+		if (err)
+			return err;
+	}
+
+	btbcm_check_bdaddr(hdev);
+
+	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_finalize);
+
+int btbcm_setup_patchram(struct hci_dev *hdev)
+{
+	bool fw_load_done = false;
+	bool use_autobaud_mode = false;
+	int err;
+
+	/* Initialize */
+	err = btbcm_initialize(hdev, &fw_load_done, use_autobaud_mode);
+	if (err)
+		return err;
+
+	/* Re-initialize after loading Patch */
+	return btbcm_finalize(hdev, &fw_load_done, use_autobaud_mode);
+}
+EXPORT_SYMBOL_GPL(btbcm_setup_patchram);
+
+int btbcm_setup_apple(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	int err;
+
+	/* Reset */
+	err = btbcm_reset(hdev);
+	if (err)
+		return err;
+
+	/* Read Verbose Config Version Info */
+	skb = btbcm_read_verbose_config(hdev);
+	if (!IS_ERR(skb)) {
+		bt_dev_info(hdev, "BCM: chip id %u build %4.4u",
+			    skb->data[1], get_unaligned_le16(skb->data + 5));
+		kfree_skb(skb);
+	}
+
+	/* Read USB Product Info */
+	skb = btbcm_read_usb_product(hdev);
+	if (!IS_ERR(skb)) {
+		bt_dev_info(hdev, "BCM: product %4.4x:%4.4x",
+			    get_unaligned_le16(skb->data + 1),
+			    get_unaligned_le16(skb->data + 3));
+		kfree_skb(skb);
+	}
+
+	/* Read Controller Features */
+	skb = btbcm_read_controller_features(hdev);
+	if (!IS_ERR(skb)) {
+		bt_dev_info(hdev, "BCM: features 0x%2.2x", skb->data[1]);
+		kfree_skb(skb);
+	}
+
+	/* Read Local Name */
+	skb = btbcm_read_local_name(hdev);
+	if (!IS_ERR(skb)) {
+		bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
+		kfree_skb(skb);
+	}
+
+	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_setup_apple);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Bluetooth support for Broadcom devices ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h
new file mode 100644
index 000000000..b4cb24231
--- /dev/null
+++ b/drivers/bluetooth/btbcm.h
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *
+ *  Bluetooth support for Broadcom devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ */
+
+#define BCM_UART_CLOCK_48MHZ	0x01
+#define BCM_UART_CLOCK_24MHZ	0x02
+
+struct bcm_update_uart_baud_rate {
+	__le16 zero;
+	__le32 baud_rate;
+} __packed;
+
+struct bcm_write_uart_clock_setting {
+	__u8 type;
+} __packed;
+
+struct bcm_set_sleep_mode {
+	__u8 sleep_mode;
+	__u8 idle_host;
+	__u8 idle_dev;
+	__u8 bt_wake_active;
+	__u8 host_wake_active;
+	__u8 allow_host_sleep;
+	__u8 combine_modes;
+	__u8 tristate_control;
+	__u8 usb_auto_sleep;
+	__u8 usb_resume_timeout;
+	__u8 break_to_host;
+	__u8 pulsed_host_wake;
+} __packed;
+
+struct bcm_set_pcm_int_params {
+	__u8 routing;
+	__u8 rate;
+	__u8 frame_sync;
+	__u8 sync_mode;
+	__u8 clock_mode;
+} __packed;
+
+struct bcm_set_pcm_format_params {
+	__u8 lsb_first;
+	__u8 fill_value;
+	__u8 fill_method;
+	__u8 fill_num;
+	__u8 right_justify;
+} __packed;
+
+#if IS_ENABLED(CONFIG_BT_BCM)
+
+int btbcm_check_bdaddr(struct hci_dev *hdev);
+int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw);
+int btbcm_read_pcm_int_params(struct hci_dev *hdev,
+			      struct bcm_set_pcm_int_params *params);
+int btbcm_write_pcm_int_params(struct hci_dev *hdev,
+			       const struct bcm_set_pcm_int_params *params);
+
+int btbcm_setup_patchram(struct hci_dev *hdev);
+int btbcm_setup_apple(struct hci_dev *hdev);
+
+int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done, bool use_autobaud_mode);
+int btbcm_finalize(struct hci_dev *hdev, bool *fw_load_done, bool use_autobaud_mode);
+
+#else
+
+static inline int btbcm_check_bdaddr(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btbcm_read_pcm_int_params(struct hci_dev *hdev,
+			      struct bcm_set_pcm_int_params *params)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btbcm_write_pcm_int_params(struct hci_dev *hdev,
+			       const struct bcm_set_pcm_int_params *params)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btbcm_setup_patchram(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static inline int btbcm_setup_apple(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static inline int btbcm_initialize(struct hci_dev *hdev, bool *fw_load_done, bool use_autobaud_mode)
+{
+	return 0;
+}
+
+static inline int btbcm_finalize(struct hci_dev *hdev, bool *fw_load_done, bool use_autobaud_mode)
+{
+	return 0;
+}
+
+#endif
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
new file mode 100644
index 000000000..bbad1207c
--- /dev/null
+++ b/drivers/bluetooth/btintel.c
@@ -0,0 +1,2662 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Bluetooth support for Intel devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/regmap.h>
+#include <asm/unaligned.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btintel.h"
+
+#define VERSION "0.1"
+
+#define BDADDR_INTEL		(&(bdaddr_t){{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
+#define RSA_HEADER_LEN		644
+#define CSS_HEADER_OFFSET	8
+#define ECDSA_OFFSET		644
+#define ECDSA_HEADER_LEN	320
+
+#define CMD_WRITE_BOOT_PARAMS	0xfc0e
+struct cmd_write_boot_params {
+	u32 boot_addr;
+	u8  fw_build_num;
+	u8  fw_build_ww;
+	u8  fw_build_yy;
+} __packed;
+
+int btintel_check_bdaddr(struct hci_dev *hdev)
+{
+	struct hci_rp_read_bd_addr *bda;
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Reading Intel device address failed (%d)",
+			   err);
+		return err;
+	}
+
+	if (skb->len != sizeof(*bda)) {
+		bt_dev_err(hdev, "Intel device address length mismatch");
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	bda = (struct hci_rp_read_bd_addr *)skb->data;
+
+	/* For some Intel based controllers, the default Bluetooth device
+	 * address 00:03:19:9E:8B:00 can be found. These controllers are
+	 * fully operational, but have the danger of duplicate addresses
+	 * and that in turn can cause problems with Bluetooth operation.
+	 */
+	if (!bacmp(&bda->bdaddr, BDADDR_INTEL)) {
+		bt_dev_err(hdev, "Found Intel default device address (%pMR)",
+			   &bda->bdaddr);
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_check_bdaddr);
+
+int btintel_enter_mfg(struct hci_dev *hdev)
+{
+	static const u8 param[] = { 0x01, 0x00 };
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Entering manufacturer mode failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_enter_mfg);
+
+int btintel_exit_mfg(struct hci_dev *hdev, bool reset, bool patched)
+{
+	u8 param[] = { 0x00, 0x00 };
+	struct sk_buff *skb;
+
+	/* The 2nd command parameter specifies the manufacturing exit method:
+	 * 0x00: Just disable the manufacturing mode (0x00).
+	 * 0x01: Disable manufacturing mode and reset with patches deactivated.
+	 * 0x02: Disable manufacturing mode and reset with patches activated.
+	 */
+	if (reset)
+		param[1] |= patched ? 0x02 : 0x01;
+
+	skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Exiting manufacturer mode failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_exit_mfg);
+
+int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Changing Intel device address failed (%d)",
+			   err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_set_bdaddr);
+
+static int btintel_set_event_mask(struct hci_dev *hdev, bool debug)
+{
+	u8 mask[8] = { 0x87, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+	struct sk_buff *skb;
+	int err;
+
+	if (debug)
+		mask[1] |= 0x62;
+
+	skb = __hci_cmd_sync(hdev, 0xfc52, 8, mask, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Setting Intel event mask failed (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+int btintel_set_diag(struct hci_dev *hdev, bool enable)
+{
+	struct sk_buff *skb;
+	u8 param[3];
+	int err;
+
+	if (enable) {
+		param[0] = 0x03;
+		param[1] = 0x03;
+		param[2] = 0x03;
+	} else {
+		param[0] = 0x00;
+		param[1] = 0x00;
+		param[2] = 0x00;
+	}
+
+	skb = __hci_cmd_sync(hdev, 0xfc43, 3, param, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		if (err == -ENODATA)
+			goto done;
+		bt_dev_err(hdev, "Changing Intel diagnostic mode failed (%d)",
+			   err);
+		return err;
+	}
+	kfree_skb(skb);
+
+done:
+	btintel_set_event_mask(hdev, enable);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_set_diag);
+
+static int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable)
+{
+	int err, ret;
+
+	err = btintel_enter_mfg(hdev);
+	if (err)
+		return err;
+
+	ret = btintel_set_diag(hdev, enable);
+
+	err = btintel_exit_mfg(hdev, false, false);
+	if (err)
+		return err;
+
+	return ret;
+}
+
+static int btintel_set_diag_combined(struct hci_dev *hdev, bool enable)
+{
+	int ret;
+
+	/* Legacy ROM device needs to be in the manufacturer mode to apply
+	 * diagnostic setting
+	 *
+	 * This flag is set after reading the Intel version.
+	 */
+	if (btintel_test_flag(hdev, INTEL_ROM_LEGACY))
+		ret = btintel_set_diag_mfg(hdev, enable);
+	else
+		ret = btintel_set_diag(hdev, enable);
+
+	return ret;
+}
+
+static void btintel_hw_error(struct hci_dev *hdev, u8 code)
+{
+	struct sk_buff *skb;
+	u8 type = 0x00;
+
+	bt_dev_err(hdev, "Hardware error 0x%2.2x", code);
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reset after hardware error failed (%ld)",
+			   PTR_ERR(skb));
+		return;
+	}
+	kfree_skb(skb);
+
+	skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Retrieving Intel exception info failed (%ld)",
+			   PTR_ERR(skb));
+		return;
+	}
+
+	if (skb->len != 13) {
+		bt_dev_err(hdev, "Exception info size mismatch");
+		kfree_skb(skb);
+		return;
+	}
+
+	bt_dev_err(hdev, "Exception info %s", (char *)(skb->data + 1));
+
+	kfree_skb(skb);
+}
+
+int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
+{
+	const char *variant;
+
+	/* The hardware platform number has a fixed value of 0x37 and
+	 * for now only accept this single value.
+	 */
+	if (ver->hw_platform != 0x37) {
+		bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
+			   ver->hw_platform);
+		return -EINVAL;
+	}
+
+	/* Check for supported iBT hardware variants of this firmware
+	 * loading method.
+	 *
+	 * This check has been put in place to ensure correct forward
+	 * compatibility options when newer hardware variants come along.
+	 */
+	switch (ver->hw_variant) {
+	case 0x07:	/* WP - Legacy ROM */
+	case 0x08:	/* StP - Legacy ROM */
+	case 0x0b:      /* SfP */
+	case 0x0c:      /* WsP */
+	case 0x11:      /* JfP */
+	case 0x12:      /* ThP */
+	case 0x13:      /* HrP */
+	case 0x14:      /* CcP */
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
+			   ver->hw_variant);
+		return -EINVAL;
+	}
+
+	switch (ver->fw_variant) {
+	case 0x01:
+		variant = "Legacy ROM 2.5";
+		break;
+	case 0x06:
+		variant = "Bootloader";
+		break;
+	case 0x22:
+		variant = "Legacy ROM 2.x";
+		break;
+	case 0x23:
+		variant = "Firmware";
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported firmware variant(%02x)", ver->fw_variant);
+		return -EINVAL;
+	}
+
+	bt_dev_info(hdev, "%s revision %u.%u build %u week %u %u",
+		    variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f,
+		    ver->fw_build_num, ver->fw_build_ww,
+		    2000 + ver->fw_build_yy);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_version_info);
+
+static int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
+			       const void *param)
+{
+	while (plen > 0) {
+		struct sk_buff *skb;
+		u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen;
+
+		cmd_param[0] = fragment_type;
+		memcpy(cmd_param + 1, param, fragment_len);
+
+		skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1,
+				     cmd_param, HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb))
+			return PTR_ERR(skb);
+
+		kfree_skb(skb);
+
+		plen -= fragment_len;
+		param += fragment_len;
+	}
+
+	return 0;
+}
+
+int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name)
+{
+	const struct firmware *fw;
+	struct sk_buff *skb;
+	const u8 *fw_ptr;
+	int err;
+
+	err = request_firmware_direct(&fw, ddc_name, &hdev->dev);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to load Intel DDC file %s (%d)",
+			   ddc_name, err);
+		return err;
+	}
+
+	bt_dev_info(hdev, "Found Intel DDC parameters: %s", ddc_name);
+
+	fw_ptr = fw->data;
+
+	/* DDC file contains one or more DDC structure which has
+	 * Length (1 byte), DDC ID (2 bytes), and DDC value (Length - 2).
+	 */
+	while (fw->size > fw_ptr - fw->data) {
+		u8 cmd_plen = fw_ptr[0] + sizeof(u8);
+
+		skb = __hci_cmd_sync(hdev, 0xfc8b, cmd_plen, fw_ptr,
+				     HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			bt_dev_err(hdev, "Failed to send Intel_Write_DDC (%ld)",
+				   PTR_ERR(skb));
+			release_firmware(fw);
+			return PTR_ERR(skb);
+		}
+
+		fw_ptr += cmd_plen;
+		kfree_skb(skb);
+	}
+
+	release_firmware(fw);
+
+	bt_dev_info(hdev, "Applying Intel DDC parameters completed");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_load_ddc_config);
+
+int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug)
+{
+	int err, ret;
+
+	err = btintel_enter_mfg(hdev);
+	if (err)
+		return err;
+
+	ret = btintel_set_event_mask(hdev, debug);
+
+	err = btintel_exit_mfg(hdev, false, false);
+	if (err)
+		return err;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(btintel_set_event_mask_mfg);
+
+int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->len != sizeof(*ver)) {
+		bt_dev_err(hdev, "Intel version event size mismatch");
+		kfree_skb(skb);
+		return -EILSEQ;
+	}
+
+	memcpy(ver, skb->data, sizeof(*ver));
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_read_version);
+
+static int btintel_version_info_tlv(struct hci_dev *hdev,
+				    struct intel_version_tlv *version)
+{
+	const char *variant;
+
+	/* The hardware platform number has a fixed value of 0x37 and
+	 * for now only accept this single value.
+	 */
+	if (INTEL_HW_PLATFORM(version->cnvi_bt) != 0x37) {
+		bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
+			   INTEL_HW_PLATFORM(version->cnvi_bt));
+		return -EINVAL;
+	}
+
+	/* Check for supported iBT hardware variants of this firmware
+	 * loading method.
+	 *
+	 * This check has been put in place to ensure correct forward
+	 * compatibility options when newer hardware variants come along.
+	 */
+	switch (INTEL_HW_VARIANT(version->cnvi_bt)) {
+	case 0x17:	/* TyP */
+	case 0x18:	/* Slr */
+	case 0x19:	/* Slr-F */
+	case 0x1b:      /* Mgr */
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported Intel hardware variant (0x%x)",
+			   INTEL_HW_VARIANT(version->cnvi_bt));
+		return -EINVAL;
+	}
+
+	switch (version->img_type) {
+	case 0x01:
+		variant = "Bootloader";
+		/* It is required that every single firmware fragment is acknowledged
+		 * with a command complete event. If the boot parameters indicate
+		 * that this bootloader does not send them, then abort the setup.
+		 */
+		if (version->limited_cce != 0x00) {
+			bt_dev_err(hdev, "Unsupported Intel firmware loading method (0x%x)",
+				   version->limited_cce);
+			return -EINVAL;
+		}
+
+		/* Secure boot engine type should be either 1 (ECDSA) or 0 (RSA) */
+		if (version->sbe_type > 0x01) {
+			bt_dev_err(hdev, "Unsupported Intel secure boot engine type (0x%x)",
+				   version->sbe_type);
+			return -EINVAL;
+		}
+
+		bt_dev_info(hdev, "Device revision is %u", version->dev_rev_id);
+		bt_dev_info(hdev, "Secure boot is %s",
+			    version->secure_boot ? "enabled" : "disabled");
+		bt_dev_info(hdev, "OTP lock is %s",
+			    version->otp_lock ? "enabled" : "disabled");
+		bt_dev_info(hdev, "API lock is %s",
+			    version->api_lock ? "enabled" : "disabled");
+		bt_dev_info(hdev, "Debug lock is %s",
+			    version->debug_lock ? "enabled" : "disabled");
+		bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
+			    version->min_fw_build_nn, version->min_fw_build_cw,
+			    2000 + version->min_fw_build_yy);
+		break;
+	case 0x03:
+		variant = "Firmware";
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported image type(%02x)", version->img_type);
+		return -EINVAL;
+	}
+
+	bt_dev_info(hdev, "%s timestamp %u.%u buildtype %u build %u", variant,
+		    2000 + (version->timestamp >> 8), version->timestamp & 0xff,
+		    version->build_type, version->build_num);
+
+	return 0;
+}
+
+static int btintel_parse_version_tlv(struct hci_dev *hdev,
+				     struct intel_version_tlv *version,
+				     struct sk_buff *skb)
+{
+	/* Consume Command Complete Status field */
+	skb_pull(skb, 1);
+
+	/* Event parameters contatin multiple TLVs. Read each of them
+	 * and only keep the required data. Also, it use existing legacy
+	 * version field like hw_platform, hw_variant, and fw_variant
+	 * to keep the existing setup flow
+	 */
+	while (skb->len) {
+		struct intel_tlv *tlv;
+
+		/* Make sure skb has a minimum length of the header */
+		if (skb->len < sizeof(*tlv))
+			return -EINVAL;
+
+		tlv = (struct intel_tlv *)skb->data;
+
+		/* Make sure skb has a enough data */
+		if (skb->len < tlv->len + sizeof(*tlv))
+			return -EINVAL;
+
+		switch (tlv->type) {
+		case INTEL_TLV_CNVI_TOP:
+			version->cnvi_top = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_CNVR_TOP:
+			version->cnvr_top = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_CNVI_BT:
+			version->cnvi_bt = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_CNVR_BT:
+			version->cnvr_bt = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_DEV_REV_ID:
+			version->dev_rev_id = get_unaligned_le16(tlv->val);
+			break;
+		case INTEL_TLV_IMAGE_TYPE:
+			version->img_type = tlv->val[0];
+			break;
+		case INTEL_TLV_TIME_STAMP:
+			/* If image type is Operational firmware (0x03), then
+			 * running FW Calendar Week and Year information can
+			 * be extracted from Timestamp information
+			 */
+			version->min_fw_build_cw = tlv->val[0];
+			version->min_fw_build_yy = tlv->val[1];
+			version->timestamp = get_unaligned_le16(tlv->val);
+			break;
+		case INTEL_TLV_BUILD_TYPE:
+			version->build_type = tlv->val[0];
+			break;
+		case INTEL_TLV_BUILD_NUM:
+			/* If image type is Operational firmware (0x03), then
+			 * running FW build number can be extracted from the
+			 * Build information
+			 */
+			version->min_fw_build_nn = tlv->val[0];
+			version->build_num = get_unaligned_le32(tlv->val);
+			break;
+		case INTEL_TLV_SECURE_BOOT:
+			version->secure_boot = tlv->val[0];
+			break;
+		case INTEL_TLV_OTP_LOCK:
+			version->otp_lock = tlv->val[0];
+			break;
+		case INTEL_TLV_API_LOCK:
+			version->api_lock = tlv->val[0];
+			break;
+		case INTEL_TLV_DEBUG_LOCK:
+			version->debug_lock = tlv->val[0];
+			break;
+		case INTEL_TLV_MIN_FW:
+			version->min_fw_build_nn = tlv->val[0];
+			version->min_fw_build_cw = tlv->val[1];
+			version->min_fw_build_yy = tlv->val[2];
+			break;
+		case INTEL_TLV_LIMITED_CCE:
+			version->limited_cce = tlv->val[0];
+			break;
+		case INTEL_TLV_SBE_TYPE:
+			version->sbe_type = tlv->val[0];
+			break;
+		case INTEL_TLV_OTP_BDADDR:
+			memcpy(&version->otp_bd_addr, tlv->val,
+							sizeof(bdaddr_t));
+			break;
+		default:
+			/* Ignore rest of information */
+			break;
+		}
+		/* consume the current tlv and move to next*/
+		skb_pull(skb, tlv->len + sizeof(*tlv));
+	}
+
+	return 0;
+}
+
+static int btintel_read_version_tlv(struct hci_dev *hdev,
+				    struct intel_version_tlv *version)
+{
+	struct sk_buff *skb;
+	const u8 param[1] = { 0xFF };
+
+	if (!version)
+		return -EINVAL;
+
+	skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->data[0]) {
+		bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
+			   skb->data[0]);
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	btintel_parse_version_tlv(hdev, version, skb);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+/* ------- REGMAP IBT SUPPORT ------- */
+
+#define IBT_REG_MODE_8BIT  0x00
+#define IBT_REG_MODE_16BIT 0x01
+#define IBT_REG_MODE_32BIT 0x02
+
+struct regmap_ibt_context {
+	struct hci_dev *hdev;
+	__u16 op_write;
+	__u16 op_read;
+};
+
+struct ibt_cp_reg_access {
+	__le32  addr;
+	__u8    mode;
+	__u8    len;
+	__u8    data[];
+} __packed;
+
+struct ibt_rp_reg_access {
+	__u8    status;
+	__le32  addr;
+	__u8    data[];
+} __packed;
+
+static int regmap_ibt_read(void *context, const void *addr, size_t reg_size,
+			   void *val, size_t val_size)
+{
+	struct regmap_ibt_context *ctx = context;
+	struct ibt_cp_reg_access cp;
+	struct ibt_rp_reg_access *rp;
+	struct sk_buff *skb;
+	int err = 0;
+
+	if (reg_size != sizeof(__le32))
+		return -EINVAL;
+
+	switch (val_size) {
+	case 1:
+		cp.mode = IBT_REG_MODE_8BIT;
+		break;
+	case 2:
+		cp.mode = IBT_REG_MODE_16BIT;
+		break;
+	case 4:
+		cp.mode = IBT_REG_MODE_32BIT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* regmap provides a little-endian formatted addr */
+	cp.addr = *(__le32 *)addr;
+	cp.len = val_size;
+
+	bt_dev_dbg(ctx->hdev, "Register (0x%x) read", le32_to_cpu(cp.addr));
+
+	skb = hci_cmd_sync(ctx->hdev, ctx->op_read, sizeof(cp), &cp,
+			   HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error (%d)",
+			   le32_to_cpu(cp.addr), err);
+		return err;
+	}
+
+	if (skb->len != sizeof(*rp) + val_size) {
+		bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad len",
+			   le32_to_cpu(cp.addr));
+		err = -EINVAL;
+		goto done;
+	}
+
+	rp = (struct ibt_rp_reg_access *)skb->data;
+
+	if (rp->addr != cp.addr) {
+		bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad addr",
+			   le32_to_cpu(rp->addr));
+		err = -EINVAL;
+		goto done;
+	}
+
+	memcpy(val, rp->data, val_size);
+
+done:
+	kfree_skb(skb);
+	return err;
+}
+
+static int regmap_ibt_gather_write(void *context,
+				   const void *addr, size_t reg_size,
+				   const void *val, size_t val_size)
+{
+	struct regmap_ibt_context *ctx = context;
+	struct ibt_cp_reg_access *cp;
+	struct sk_buff *skb;
+	int plen = sizeof(*cp) + val_size;
+	u8 mode;
+	int err = 0;
+
+	if (reg_size != sizeof(__le32))
+		return -EINVAL;
+
+	switch (val_size) {
+	case 1:
+		mode = IBT_REG_MODE_8BIT;
+		break;
+	case 2:
+		mode = IBT_REG_MODE_16BIT;
+		break;
+	case 4:
+		mode = IBT_REG_MODE_32BIT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	cp = kmalloc(plen, GFP_KERNEL);
+	if (!cp)
+		return -ENOMEM;
+
+	/* regmap provides a little-endian formatted addr/value */
+	cp->addr = *(__le32 *)addr;
+	cp->mode = mode;
+	cp->len = val_size;
+	memcpy(&cp->data, val, val_size);
+
+	bt_dev_dbg(ctx->hdev, "Register (0x%x) write", le32_to_cpu(cp->addr));
+
+	skb = hci_cmd_sync(ctx->hdev, ctx->op_write, plen, cp, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(ctx->hdev, "regmap: Register (0x%x) write error (%d)",
+			   le32_to_cpu(cp->addr), err);
+		goto done;
+	}
+	kfree_skb(skb);
+
+done:
+	kfree(cp);
+	return err;
+}
+
+static int regmap_ibt_write(void *context, const void *data, size_t count)
+{
+	/* data contains register+value, since we only support 32bit addr,
+	 * minimum data size is 4 bytes.
+	 */
+	if (WARN_ONCE(count < 4, "Invalid register access"))
+		return -EINVAL;
+
+	return regmap_ibt_gather_write(context, data, 4, data + 4, count - 4);
+}
+
+static void regmap_ibt_free_context(void *context)
+{
+	kfree(context);
+}
+
+static const struct regmap_bus regmap_ibt = {
+	.read = regmap_ibt_read,
+	.write = regmap_ibt_write,
+	.gather_write = regmap_ibt_gather_write,
+	.free_context = regmap_ibt_free_context,
+	.reg_format_endian_default = REGMAP_ENDIAN_LITTLE,
+	.val_format_endian_default = REGMAP_ENDIAN_LITTLE,
+};
+
+/* Config is the same for all register regions */
+static const struct regmap_config regmap_ibt_cfg = {
+	.name      = "btintel_regmap",
+	.reg_bits  = 32,
+	.val_bits  = 32,
+};
+
+struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
+				   u16 opcode_write)
+{
+	struct regmap_ibt_context *ctx;
+
+	bt_dev_info(hdev, "regmap: Init R%x-W%x region", opcode_read,
+		    opcode_write);
+
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return ERR_PTR(-ENOMEM);
+
+	ctx->op_read = opcode_read;
+	ctx->op_write = opcode_write;
+	ctx->hdev = hdev;
+
+	return regmap_init(&hdev->dev, &regmap_ibt, ctx, &regmap_ibt_cfg);
+}
+EXPORT_SYMBOL_GPL(btintel_regmap_init);
+
+int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param)
+{
+	struct intel_reset params = { 0x00, 0x01, 0x00, 0x01, 0x00000000 };
+	struct sk_buff *skb;
+
+	params.boot_param = cpu_to_le32(boot_param);
+
+	skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params), &params,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Failed to send Intel Reset command");
+		return PTR_ERR(skb);
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_send_intel_reset);
+
+int btintel_read_boot_params(struct hci_dev *hdev,
+			     struct intel_boot_params *params)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading Intel boot parameters failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->len != sizeof(*params)) {
+		bt_dev_err(hdev, "Intel boot parameters size mismatch");
+		kfree_skb(skb);
+		return -EILSEQ;
+	}
+
+	memcpy(params, skb->data, sizeof(*params));
+
+	kfree_skb(skb);
+
+	if (params->status) {
+		bt_dev_err(hdev, "Intel boot parameters command failed (%02x)",
+			   params->status);
+		return -bt_to_errno(params->status);
+	}
+
+	bt_dev_info(hdev, "Device revision is %u",
+		    le16_to_cpu(params->dev_revid));
+
+	bt_dev_info(hdev, "Secure boot is %s",
+		    params->secure_boot ? "enabled" : "disabled");
+
+	bt_dev_info(hdev, "OTP lock is %s",
+		    params->otp_lock ? "enabled" : "disabled");
+
+	bt_dev_info(hdev, "API lock is %s",
+		    params->api_lock ? "enabled" : "disabled");
+
+	bt_dev_info(hdev, "Debug lock is %s",
+		    params->debug_lock ? "enabled" : "disabled");
+
+	bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
+		    params->min_fw_build_nn, params->min_fw_build_cw,
+		    2000 + params->min_fw_build_yy);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_read_boot_params);
+
+static int btintel_sfi_rsa_header_secure_send(struct hci_dev *hdev,
+					      const struct firmware *fw)
+{
+	int err;
+
+	/* Start the firmware download transaction with the Init fragment
+	 * represented by the 128 bytes of CSS header.
+	 */
+	err = btintel_secure_send(hdev, 0x00, 128, fw->data);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send firmware header (%d)", err);
+		goto done;
+	}
+
+	/* Send the 256 bytes of public key information from the firmware
+	 * as the PKey fragment.
+	 */
+	err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send firmware pkey (%d)", err);
+		goto done;
+	}
+
+	/* Send the 256 bytes of signature information from the firmware
+	 * as the Sign fragment.
+	 */
+	err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send firmware signature (%d)", err);
+		goto done;
+	}
+
+done:
+	return err;
+}
+
+static int btintel_sfi_ecdsa_header_secure_send(struct hci_dev *hdev,
+						const struct firmware *fw)
+{
+	int err;
+
+	/* Start the firmware download transaction with the Init fragment
+	 * represented by the 128 bytes of CSS header.
+	 */
+	err = btintel_secure_send(hdev, 0x00, 128, fw->data + 644);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send firmware header (%d)", err);
+		return err;
+	}
+
+	/* Send the 96 bytes of public key information from the firmware
+	 * as the PKey fragment.
+	 */
+	err = btintel_secure_send(hdev, 0x03, 96, fw->data + 644 + 128);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send firmware pkey (%d)", err);
+		return err;
+	}
+
+	/* Send the 96 bytes of signature information from the firmware
+	 * as the Sign fragment
+	 */
+	err = btintel_secure_send(hdev, 0x02, 96, fw->data + 644 + 224);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send firmware signature (%d)",
+			   err);
+		return err;
+	}
+	return 0;
+}
+
+static int btintel_download_firmware_payload(struct hci_dev *hdev,
+					     const struct firmware *fw,
+					     size_t offset)
+{
+	int err;
+	const u8 *fw_ptr;
+	u32 frag_len;
+
+	fw_ptr = fw->data + offset;
+	frag_len = 0;
+	err = -EINVAL;
+
+	while (fw_ptr - fw->data < fw->size) {
+		struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
+
+		frag_len += sizeof(*cmd) + cmd->plen;
+
+		/* The parameter length of the secure send command requires
+		 * a 4 byte alignment. It happens so that the firmware file
+		 * contains proper Intel_NOP commands to align the fragments
+		 * as needed.
+		 *
+		 * Send set of commands with 4 byte alignment from the
+		 * firmware data buffer as a single Data fragement.
+		 */
+		if (!(frag_len % 4)) {
+			err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
+			if (err < 0) {
+				bt_dev_err(hdev,
+					   "Failed to send firmware data (%d)",
+					   err);
+				goto done;
+			}
+
+			fw_ptr += frag_len;
+			frag_len = 0;
+		}
+	}
+
+done:
+	return err;
+}
+
+static bool btintel_firmware_version(struct hci_dev *hdev,
+				     u8 num, u8 ww, u8 yy,
+				     const struct firmware *fw,
+				     u32 *boot_addr)
+{
+	const u8 *fw_ptr;
+
+	fw_ptr = fw->data;
+
+	while (fw_ptr - fw->data < fw->size) {
+		struct hci_command_hdr *cmd = (void *)(fw_ptr);
+
+		/* Each SKU has a different reset parameter to use in the
+		 * HCI_Intel_Reset command and it is embedded in the firmware
+		 * data. So, instead of using static value per SKU, check
+		 * the firmware data and save it for later use.
+		 */
+		if (le16_to_cpu(cmd->opcode) == CMD_WRITE_BOOT_PARAMS) {
+			struct cmd_write_boot_params *params;
+
+			params = (void *)(fw_ptr + sizeof(*cmd));
+
+			*boot_addr = le32_to_cpu(params->boot_addr);
+
+			bt_dev_info(hdev, "Boot Address: 0x%x", *boot_addr);
+
+			bt_dev_info(hdev, "Firmware Version: %u-%u.%u",
+				    params->fw_build_num, params->fw_build_ww,
+				    params->fw_build_yy);
+
+			return (num == params->fw_build_num &&
+				ww == params->fw_build_ww &&
+				yy == params->fw_build_yy);
+		}
+
+		fw_ptr += sizeof(*cmd) + cmd->plen;
+	}
+
+	return false;
+}
+
+int btintel_download_firmware(struct hci_dev *hdev,
+			      struct intel_version *ver,
+			      const struct firmware *fw,
+			      u32 *boot_param)
+{
+	int err;
+
+	/* SfP and WsP don't seem to update the firmware version on file
+	 * so version checking is currently not possible.
+	 */
+	switch (ver->hw_variant) {
+	case 0x0b:	/* SfP */
+	case 0x0c:	/* WsP */
+		/* Skip version checking */
+		break;
+	default:
+
+		/* Skip download if firmware has the same version */
+		if (btintel_firmware_version(hdev, ver->fw_build_num,
+					     ver->fw_build_ww, ver->fw_build_yy,
+					     fw, boot_param)) {
+			bt_dev_info(hdev, "Firmware already loaded");
+			/* Return -EALREADY to indicate that the firmware has
+			 * already been loaded.
+			 */
+			return -EALREADY;
+		}
+	}
+
+	/* The firmware variant determines if the device is in bootloader
+	 * mode or is running operational firmware. The value 0x06 identifies
+	 * the bootloader and the value 0x23 identifies the operational
+	 * firmware.
+	 *
+	 * If the firmware version has changed that means it needs to be reset
+	 * to bootloader when operational so the new firmware can be loaded.
+	 */
+	if (ver->fw_variant == 0x23)
+		return -EINVAL;
+
+	err = btintel_sfi_rsa_header_secure_send(hdev, fw);
+	if (err)
+		return err;
+
+	return btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
+}
+EXPORT_SYMBOL_GPL(btintel_download_firmware);
+
+static int btintel_download_fw_tlv(struct hci_dev *hdev,
+				   struct intel_version_tlv *ver,
+				   const struct firmware *fw, u32 *boot_param,
+				   u8 hw_variant, u8 sbe_type)
+{
+	int err;
+	u32 css_header_ver;
+
+	/* Skip download if firmware has the same version */
+	if (btintel_firmware_version(hdev, ver->min_fw_build_nn,
+				     ver->min_fw_build_cw,
+				     ver->min_fw_build_yy,
+				     fw, boot_param)) {
+		bt_dev_info(hdev, "Firmware already loaded");
+		/* Return -EALREADY to indicate that firmware has
+		 * already been loaded.
+		 */
+		return -EALREADY;
+	}
+
+	/* The firmware variant determines if the device is in bootloader
+	 * mode or is running operational firmware. The value 0x01 identifies
+	 * the bootloader and the value 0x03 identifies the operational
+	 * firmware.
+	 *
+	 * If the firmware version has changed that means it needs to be reset
+	 * to bootloader when operational so the new firmware can be loaded.
+	 */
+	if (ver->img_type == 0x03)
+		return -EINVAL;
+
+	/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
+	 * only RSA secure boot engine. Hence, the corresponding sfi file will
+	 * have RSA header of 644 bytes followed by Command Buffer.
+	 *
+	 * iBT hardware variants 0x17, 0x18 onwards support both RSA and ECDSA
+	 * secure boot engine. As a result, the corresponding sfi file will
+	 * have RSA header of 644, ECDSA header of 320 bytes followed by
+	 * Command Buffer.
+	 *
+	 * CSS Header byte positions 0x08 to 0x0B represent the CSS Header
+	 * version: RSA(0x00010000) , ECDSA (0x00020000)
+	 */
+	css_header_ver = get_unaligned_le32(fw->data + CSS_HEADER_OFFSET);
+	if (css_header_ver != 0x00010000) {
+		bt_dev_err(hdev, "Invalid CSS Header version");
+		return -EINVAL;
+	}
+
+	if (hw_variant <= 0x14) {
+		if (sbe_type != 0x00) {
+			bt_dev_err(hdev, "Invalid SBE type for hardware variant (%d)",
+				   hw_variant);
+			return -EINVAL;
+		}
+
+		err = btintel_sfi_rsa_header_secure_send(hdev, fw);
+		if (err)
+			return err;
+
+		err = btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
+		if (err)
+			return err;
+	} else if (hw_variant >= 0x17) {
+		/* Check if CSS header for ECDSA follows the RSA header */
+		if (fw->data[ECDSA_OFFSET] != 0x06)
+			return -EINVAL;
+
+		/* Check if the CSS Header version is ECDSA(0x00020000) */
+		css_header_ver = get_unaligned_le32(fw->data + ECDSA_OFFSET + CSS_HEADER_OFFSET);
+		if (css_header_ver != 0x00020000) {
+			bt_dev_err(hdev, "Invalid CSS Header version");
+			return -EINVAL;
+		}
+
+		if (sbe_type == 0x00) {
+			err = btintel_sfi_rsa_header_secure_send(hdev, fw);
+			if (err)
+				return err;
+
+			err = btintel_download_firmware_payload(hdev, fw,
+								RSA_HEADER_LEN + ECDSA_HEADER_LEN);
+			if (err)
+				return err;
+		} else if (sbe_type == 0x01) {
+			err = btintel_sfi_ecdsa_header_secure_send(hdev, fw);
+			if (err)
+				return err;
+
+			err = btintel_download_firmware_payload(hdev, fw,
+								RSA_HEADER_LEN + ECDSA_HEADER_LEN);
+			if (err)
+				return err;
+		}
+	}
+	return 0;
+}
+
+static void btintel_reset_to_bootloader(struct hci_dev *hdev)
+{
+	struct intel_reset params;
+	struct sk_buff *skb;
+
+	/* Send Intel Reset command. This will result in
+	 * re-enumeration of BT controller.
+	 *
+	 * Intel Reset parameter description:
+	 * reset_type :   0x00 (Soft reset),
+	 *		  0x01 (Hard reset)
+	 * patch_enable : 0x00 (Do not enable),
+	 *		  0x01 (Enable)
+	 * ddc_reload :   0x00 (Do not reload),
+	 *		  0x01 (Reload)
+	 * boot_option:   0x00 (Current image),
+	 *                0x01 (Specified boot address)
+	 * boot_param:    Boot address
+	 *
+	 */
+	params.reset_type = 0x01;
+	params.patch_enable = 0x01;
+	params.ddc_reload = 0x01;
+	params.boot_option = 0x00;
+	params.boot_param = cpu_to_le32(0x00000000);
+
+	skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params),
+			     &params, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "FW download error recovery failed (%ld)",
+			   PTR_ERR(skb));
+		return;
+	}
+	bt_dev_info(hdev, "Intel reset sent to retry FW download");
+	kfree_skb(skb);
+
+	/* Current Intel BT controllers(ThP/JfP) hold the USB reset
+	 * lines for 2ms when it receives Intel Reset in bootloader mode.
+	 * Whereas, the upcoming Intel BT controllers will hold USB reset
+	 * for 150ms. To keep the delay generic, 150ms is chosen here.
+	 */
+	msleep(150);
+}
+
+static int btintel_read_debug_features(struct hci_dev *hdev,
+				       struct intel_debug_features *features)
+{
+	struct sk_buff *skb;
+	u8 page_no = 1;
+
+	/* Intel controller supports two pages, each page is of 128-bit
+	 * feature bit mask. And each bit defines specific feature support
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfca6, sizeof(page_no), &page_no,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading supported features failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->len != (sizeof(features->page1) + 3)) {
+		bt_dev_err(hdev, "Supported features event size mismatch");
+		kfree_skb(skb);
+		return -EILSEQ;
+	}
+
+	memcpy(features->page1, skb->data + 3, sizeof(features->page1));
+
+	/* Read the supported features page2 if required in future.
+	 */
+	kfree_skb(skb);
+	return 0;
+}
+
+static int btintel_set_debug_features(struct hci_dev *hdev,
+			       const struct intel_debug_features *features)
+{
+	u8 mask[11] = { 0x0a, 0x92, 0x02, 0x7f, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00 };
+	u8 period[5] = { 0x04, 0x91, 0x02, 0x05, 0x00 };
+	u8 trace_enable = 0x02;
+	struct sk_buff *skb;
+
+	if (!features) {
+		bt_dev_warn(hdev, "Debug features not read");
+		return -EINVAL;
+	}
+
+	if (!(features->page1[0] & 0x3f)) {
+		bt_dev_info(hdev, "Telemetry exception format not supported");
+		return 0;
+	}
+
+	skb = __hci_cmd_sync(hdev, 0xfc8b, 11, mask, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Setting Intel telemetry ddc write event mask failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	skb = __hci_cmd_sync(hdev, 0xfc8b, 5, period, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Setting periodicity for link statistics traces failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	skb = __hci_cmd_sync(hdev, 0xfca1, 1, &trace_enable, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Enable tracing of link statistics events failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	bt_dev_info(hdev, "set debug features: trace_enable 0x%02x mask 0x%02x",
+		    trace_enable, mask[3]);
+
+	return 0;
+}
+
+static int btintel_reset_debug_features(struct hci_dev *hdev,
+				 const struct intel_debug_features *features)
+{
+	u8 mask[11] = { 0x0a, 0x92, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00 };
+	u8 trace_enable = 0x00;
+	struct sk_buff *skb;
+
+	if (!features) {
+		bt_dev_warn(hdev, "Debug features not read");
+		return -EINVAL;
+	}
+
+	if (!(features->page1[0] & 0x3f)) {
+		bt_dev_info(hdev, "Telemetry exception format not supported");
+		return 0;
+	}
+
+	/* Should stop the trace before writing ddc event mask. */
+	skb = __hci_cmd_sync(hdev, 0xfca1, 1, &trace_enable, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Stop tracing of link statistics events failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	skb = __hci_cmd_sync(hdev, 0xfc8b, 11, mask, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Setting Intel telemetry ddc write event mask failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	bt_dev_info(hdev, "reset debug features: trace_enable 0x%02x mask 0x%02x",
+		    trace_enable, mask[3]);
+
+	return 0;
+}
+
+int btintel_set_quality_report(struct hci_dev *hdev, bool enable)
+{
+	struct intel_debug_features features;
+	int err;
+
+	bt_dev_dbg(hdev, "enable %d", enable);
+
+	/* Read the Intel supported features and if new exception formats
+	 * supported, need to load the additional DDC config to enable.
+	 */
+	err = btintel_read_debug_features(hdev, &features);
+	if (err)
+		return err;
+
+	/* Set or reset the debug features. */
+	if (enable)
+		err = btintel_set_debug_features(hdev, &features);
+	else
+		err = btintel_reset_debug_features(hdev, &features);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(btintel_set_quality_report);
+
+static const struct firmware *btintel_legacy_rom_get_fw(struct hci_dev *hdev,
+					       struct intel_version *ver)
+{
+	const struct firmware *fw;
+	char fwname[64];
+	int ret;
+
+	snprintf(fwname, sizeof(fwname),
+		 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
+		 ver->hw_platform, ver->hw_variant, ver->hw_revision,
+		 ver->fw_variant,  ver->fw_revision, ver->fw_build_num,
+		 ver->fw_build_ww, ver->fw_build_yy);
+
+	ret = request_firmware(&fw, fwname, &hdev->dev);
+	if (ret < 0) {
+		if (ret == -EINVAL) {
+			bt_dev_err(hdev, "Intel firmware file request failed (%d)",
+				   ret);
+			return NULL;
+		}
+
+		bt_dev_err(hdev, "failed to open Intel firmware file: %s (%d)",
+			   fwname, ret);
+
+		/* If the correct firmware patch file is not found, use the
+		 * default firmware patch file instead
+		 */
+		snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
+			 ver->hw_platform, ver->hw_variant);
+		if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
+			bt_dev_err(hdev, "failed to open default fw file: %s",
+				   fwname);
+			return NULL;
+		}
+	}
+
+	bt_dev_info(hdev, "Intel Bluetooth firmware file: %s", fwname);
+
+	return fw;
+}
+
+static int btintel_legacy_rom_patching(struct hci_dev *hdev,
+				      const struct firmware *fw,
+				      const u8 **fw_ptr, int *disable_patch)
+{
+	struct sk_buff *skb;
+	struct hci_command_hdr *cmd;
+	const u8 *cmd_param;
+	struct hci_event_hdr *evt = NULL;
+	const u8 *evt_param = NULL;
+	int remain = fw->size - (*fw_ptr - fw->data);
+
+	/* The first byte indicates the types of the patch command or event.
+	 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
+	 * in the current firmware buffer doesn't start with 0x01 or
+	 * the size of remain buffer is smaller than HCI command header,
+	 * the firmware file is corrupted and it should stop the patching
+	 * process.
+	 */
+	if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
+		bt_dev_err(hdev, "Intel fw corrupted: invalid cmd read");
+		return -EINVAL;
+	}
+	(*fw_ptr)++;
+	remain--;
+
+	cmd = (struct hci_command_hdr *)(*fw_ptr);
+	*fw_ptr += sizeof(*cmd);
+	remain -= sizeof(*cmd);
+
+	/* Ensure that the remain firmware data is long enough than the length
+	 * of command parameter. If not, the firmware file is corrupted.
+	 */
+	if (remain < cmd->plen) {
+		bt_dev_err(hdev, "Intel fw corrupted: invalid cmd len");
+		return -EFAULT;
+	}
+
+	/* If there is a command that loads a patch in the firmware
+	 * file, then enable the patch upon success, otherwise just
+	 * disable the manufacturer mode, for example patch activation
+	 * is not required when the default firmware patch file is used
+	 * because there are no patch data to load.
+	 */
+	if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
+		*disable_patch = 0;
+
+	cmd_param = *fw_ptr;
+	*fw_ptr += cmd->plen;
+	remain -= cmd->plen;
+
+	/* This reads the expected events when the above command is sent to the
+	 * device. Some vendor commands expects more than one events, for
+	 * example command status event followed by vendor specific event.
+	 * For this case, it only keeps the last expected event. so the command
+	 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
+	 * last expected event.
+	 */
+	while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
+		(*fw_ptr)++;
+		remain--;
+
+		evt = (struct hci_event_hdr *)(*fw_ptr);
+		*fw_ptr += sizeof(*evt);
+		remain -= sizeof(*evt);
+
+		if (remain < evt->plen) {
+			bt_dev_err(hdev, "Intel fw corrupted: invalid evt len");
+			return -EFAULT;
+		}
+
+		evt_param = *fw_ptr;
+		*fw_ptr += evt->plen;
+		remain -= evt->plen;
+	}
+
+	/* Every HCI commands in the firmware file has its correspond event.
+	 * If event is not found or remain is smaller than zero, the firmware
+	 * file is corrupted.
+	 */
+	if (!evt || !evt_param || remain < 0) {
+		bt_dev_err(hdev, "Intel fw corrupted: invalid evt read");
+		return -EFAULT;
+	}
+
+	skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
+				cmd_param, evt->evt, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "sending Intel patch command (0x%4.4x) failed (%ld)",
+			   cmd->opcode, PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	/* It ensures that the returned event matches the event data read from
+	 * the firmware file. At fist, it checks the length and then
+	 * the contents of the event.
+	 */
+	if (skb->len != evt->plen) {
+		bt_dev_err(hdev, "mismatch event length (opcode 0x%4.4x)",
+			   le16_to_cpu(cmd->opcode));
+		kfree_skb(skb);
+		return -EFAULT;
+	}
+
+	if (memcmp(skb->data, evt_param, evt->plen)) {
+		bt_dev_err(hdev, "mismatch event parameter (opcode 0x%4.4x)",
+			   le16_to_cpu(cmd->opcode));
+		kfree_skb(skb);
+		return -EFAULT;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int btintel_legacy_rom_setup(struct hci_dev *hdev,
+				    struct intel_version *ver)
+{
+	const struct firmware *fw;
+	const u8 *fw_ptr;
+	int disable_patch, err;
+	struct intel_version new_ver;
+
+	BT_DBG("%s", hdev->name);
+
+	/* fw_patch_num indicates the version of patch the device currently
+	 * have. If there is no patch data in the device, it is always 0x00.
+	 * So, if it is other than 0x00, no need to patch the device again.
+	 */
+	if (ver->fw_patch_num) {
+		bt_dev_info(hdev,
+			    "Intel device is already patched. patch num: %02x",
+			    ver->fw_patch_num);
+		goto complete;
+	}
+
+	/* Opens the firmware patch file based on the firmware version read
+	 * from the controller. If it fails to open the matching firmware
+	 * patch file, it tries to open the default firmware patch file.
+	 * If no patch file is found, allow the device to operate without
+	 * a patch.
+	 */
+	fw = btintel_legacy_rom_get_fw(hdev, ver);
+	if (!fw)
+		goto complete;
+	fw_ptr = fw->data;
+
+	/* Enable the manufacturer mode of the controller.
+	 * Only while this mode is enabled, the driver can download the
+	 * firmware patch data and configuration parameters.
+	 */
+	err = btintel_enter_mfg(hdev);
+	if (err) {
+		release_firmware(fw);
+		return err;
+	}
+
+	disable_patch = 1;
+
+	/* The firmware data file consists of list of Intel specific HCI
+	 * commands and its expected events. The first byte indicates the
+	 * type of the message, either HCI command or HCI event.
+	 *
+	 * It reads the command and its expected event from the firmware file,
+	 * and send to the controller. Once __hci_cmd_sync_ev() returns,
+	 * the returned event is compared with the event read from the firmware
+	 * file and it will continue until all the messages are downloaded to
+	 * the controller.
+	 *
+	 * Once the firmware patching is completed successfully,
+	 * the manufacturer mode is disabled with reset and activating the
+	 * downloaded patch.
+	 *
+	 * If the firmware patching fails, the manufacturer mode is
+	 * disabled with reset and deactivating the patch.
+	 *
+	 * If the default patch file is used, no reset is done when disabling
+	 * the manufacturer.
+	 */
+	while (fw->size > fw_ptr - fw->data) {
+		int ret;
+
+		ret = btintel_legacy_rom_patching(hdev, fw, &fw_ptr,
+						 &disable_patch);
+		if (ret < 0)
+			goto exit_mfg_deactivate;
+	}
+
+	release_firmware(fw);
+
+	if (disable_patch)
+		goto exit_mfg_disable;
+
+	/* Patching completed successfully and disable the manufacturer mode
+	 * with reset and activate the downloaded firmware patches.
+	 */
+	err = btintel_exit_mfg(hdev, true, true);
+	if (err)
+		return err;
+
+	/* Need build number for downloaded fw patches in
+	 * every power-on boot
+	 */
+	err = btintel_read_version(hdev, &new_ver);
+	if (err)
+		return err;
+
+	bt_dev_info(hdev, "Intel BT fw patch 0x%02x completed & activated",
+		    new_ver.fw_patch_num);
+
+	goto complete;
+
+exit_mfg_disable:
+	/* Disable the manufacturer mode without reset */
+	err = btintel_exit_mfg(hdev, false, false);
+	if (err)
+		return err;
+
+	bt_dev_info(hdev, "Intel firmware patch completed");
+
+	goto complete;
+
+exit_mfg_deactivate:
+	release_firmware(fw);
+
+	/* Patching failed. Disable the manufacturer mode with reset and
+	 * deactivate the downloaded firmware patches.
+	 */
+	err = btintel_exit_mfg(hdev, true, false);
+	if (err)
+		return err;
+
+	bt_dev_info(hdev, "Intel firmware patch completed and deactivated");
+
+complete:
+	/* Set the event mask for Intel specific vendor events. This enables
+	 * a few extra events that are useful during general operation.
+	 */
+	btintel_set_event_mask_mfg(hdev, false);
+
+	btintel_check_bdaddr(hdev);
+
+	return 0;
+}
+
+static int btintel_download_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
+{
+	ktime_t delta, rettime;
+	unsigned long long duration;
+	int err;
+
+	btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+
+	bt_dev_info(hdev, "Waiting for firmware download to complete");
+
+	err = btintel_wait_on_flag_timeout(hdev, INTEL_DOWNLOADING,
+					   TASK_INTERRUPTIBLE,
+					   msecs_to_jiffies(msec));
+	if (err == -EINTR) {
+		bt_dev_err(hdev, "Firmware loading interrupted");
+		return err;
+	}
+
+	if (err) {
+		bt_dev_err(hdev, "Firmware loading timeout");
+		return -ETIMEDOUT;
+	}
+
+	if (btintel_test_flag(hdev, INTEL_FIRMWARE_FAILED)) {
+		bt_dev_err(hdev, "Firmware loading failed");
+		return -ENOEXEC;
+	}
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
+
+	return 0;
+}
+
+static int btintel_boot_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
+{
+	ktime_t delta, rettime;
+	unsigned long long duration;
+	int err;
+
+	bt_dev_info(hdev, "Waiting for device to boot");
+
+	err = btintel_wait_on_flag_timeout(hdev, INTEL_BOOTING,
+					   TASK_INTERRUPTIBLE,
+					   msecs_to_jiffies(msec));
+	if (err == -EINTR) {
+		bt_dev_err(hdev, "Device boot interrupted");
+		return -EINTR;
+	}
+
+	if (err) {
+		bt_dev_err(hdev, "Device boot timeout");
+		return -ETIMEDOUT;
+	}
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Device booted in %llu usecs", duration);
+
+	return 0;
+}
+
+static int btintel_boot(struct hci_dev *hdev, u32 boot_addr)
+{
+	ktime_t calltime;
+	int err;
+
+	calltime = ktime_get();
+
+	btintel_set_flag(hdev, INTEL_BOOTING);
+
+	err = btintel_send_intel_reset(hdev, boot_addr);
+	if (err) {
+		bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
+		btintel_reset_to_bootloader(hdev);
+		return err;
+	}
+
+	/* The bootloader will not indicate when the device is ready. This
+	 * is done by the operational firmware sending bootup notification.
+	 *
+	 * Booting into operational firmware should not take longer than
+	 * 1 second. However if that happens, then just fail the setup
+	 * since something went wrong.
+	 */
+	err = btintel_boot_wait(hdev, calltime, 1000);
+	if (err == -ETIMEDOUT)
+		btintel_reset_to_bootloader(hdev);
+
+	return err;
+}
+
+static int btintel_get_fw_name(struct intel_version *ver,
+					     struct intel_boot_params *params,
+					     char *fw_name, size_t len,
+					     const char *suffix)
+{
+	switch (ver->hw_variant) {
+	case 0x0b:	/* SfP */
+	case 0x0c:	/* WsP */
+		snprintf(fw_name, len, "intel/ibt-%u-%u.%s",
+			le16_to_cpu(ver->hw_variant),
+			le16_to_cpu(params->dev_revid),
+			suffix);
+		break;
+	case 0x11:	/* JfP */
+	case 0x12:	/* ThP */
+	case 0x13:	/* HrP */
+	case 0x14:	/* CcP */
+		snprintf(fw_name, len, "intel/ibt-%u-%u-%u.%s",
+			le16_to_cpu(ver->hw_variant),
+			le16_to_cpu(ver->hw_revision),
+			le16_to_cpu(ver->fw_revision),
+			suffix);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int btintel_download_fw(struct hci_dev *hdev,
+					 struct intel_version *ver,
+					 struct intel_boot_params *params,
+					 u32 *boot_param)
+{
+	const struct firmware *fw;
+	char fwname[64];
+	int err;
+	ktime_t calltime;
+
+	if (!ver || !params)
+		return -EINVAL;
+
+	/* The firmware variant determines if the device is in bootloader
+	 * mode or is running operational firmware. The value 0x06 identifies
+	 * the bootloader and the value 0x23 identifies the operational
+	 * firmware.
+	 *
+	 * When the operational firmware is already present, then only
+	 * the check for valid Bluetooth device address is needed. This
+	 * determines if the device will be added as configured or
+	 * unconfigured controller.
+	 *
+	 * It is not possible to use the Secure Boot Parameters in this
+	 * case since that command is only available in bootloader mode.
+	 */
+	if (ver->fw_variant == 0x23) {
+		btintel_clear_flag(hdev, INTEL_BOOTLOADER);
+		btintel_check_bdaddr(hdev);
+
+		/* SfP and WsP don't seem to update the firmware version on file
+		 * so version checking is currently possible.
+		 */
+		switch (ver->hw_variant) {
+		case 0x0b:	/* SfP */
+		case 0x0c:	/* WsP */
+			return 0;
+		}
+
+		/* Proceed to download to check if the version matches */
+		goto download;
+	}
+
+	/* Read the secure boot parameters to identify the operating
+	 * details of the bootloader.
+	 */
+	err = btintel_read_boot_params(hdev, params);
+	if (err)
+		return err;
+
+	/* It is required that every single firmware fragment is acknowledged
+	 * with a command complete event. If the boot parameters indicate
+	 * that this bootloader does not send them, then abort the setup.
+	 */
+	if (params->limited_cce != 0x00) {
+		bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
+			   params->limited_cce);
+		return -EINVAL;
+	}
+
+	/* If the OTP has no valid Bluetooth device address, then there will
+	 * also be no valid address for the operational firmware.
+	 */
+	if (!bacmp(&params->otp_bdaddr, BDADDR_ANY)) {
+		bt_dev_info(hdev, "No device address configured");
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	}
+
+download:
+	/* With this Intel bootloader only the hardware variant and device
+	 * revision information are used to select the right firmware for SfP
+	 * and WsP.
+	 *
+	 * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
+	 *
+	 * Currently the supported hardware variants are:
+	 *   11 (0x0b) for iBT3.0 (LnP/SfP)
+	 *   12 (0x0c) for iBT3.5 (WsP)
+	 *
+	 * For ThP/JfP and for future SKU's, the FW name varies based on HW
+	 * variant, HW revision and FW revision, as these are dependent on CNVi
+	 * and RF Combination.
+	 *
+	 *   17 (0x11) for iBT3.5 (JfP)
+	 *   18 (0x12) for iBT3.5 (ThP)
+	 *
+	 * The firmware file name for these will be
+	 * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi.
+	 *
+	 */
+	err = btintel_get_fw_name(ver, params, fwname, sizeof(fwname), "sfi");
+	if (err < 0) {
+		if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
+			/* Firmware has already been loaded */
+			btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+			return 0;
+		}
+
+		bt_dev_err(hdev, "Unsupported Intel firmware naming");
+		return -EINVAL;
+	}
+
+	err = firmware_request_nowarn(&fw, fwname, &hdev->dev);
+	if (err < 0) {
+		if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
+			/* Firmware has already been loaded */
+			btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+			return 0;
+		}
+
+		bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)",
+			   fwname, err);
+		return err;
+	}
+
+	bt_dev_info(hdev, "Found device firmware: %s", fwname);
+
+	if (fw->size < 644) {
+		bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
+			   fw->size);
+		err = -EBADF;
+		goto done;
+	}
+
+	calltime = ktime_get();
+
+	btintel_set_flag(hdev, INTEL_DOWNLOADING);
+
+	/* Start firmware downloading and get boot parameter */
+	err = btintel_download_firmware(hdev, ver, fw, boot_param);
+	if (err < 0) {
+		if (err == -EALREADY) {
+			/* Firmware has already been loaded */
+			btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+			err = 0;
+			goto done;
+		}
+
+		/* When FW download fails, send Intel Reset to retry
+		 * FW download.
+		 */
+		btintel_reset_to_bootloader(hdev);
+		goto done;
+	}
+
+	/* Before switching the device into operational mode and with that
+	 * booting the loaded firmware, wait for the bootloader notification
+	 * that all fragments have been successfully received.
+	 *
+	 * When the event processing receives the notification, then the
+	 * INTEL_DOWNLOADING flag will be cleared.
+	 *
+	 * The firmware loading should not take longer than 5 seconds
+	 * and thus just timeout if that happens and fail the setup
+	 * of this device.
+	 */
+	err = btintel_download_wait(hdev, calltime, 5000);
+	if (err == -ETIMEDOUT)
+		btintel_reset_to_bootloader(hdev);
+
+done:
+	release_firmware(fw);
+	return err;
+}
+
+static int btintel_bootloader_setup(struct hci_dev *hdev,
+				    struct intel_version *ver)
+{
+	struct intel_version new_ver;
+	struct intel_boot_params params;
+	u32 boot_param;
+	char ddcname[64];
+	int err;
+
+	BT_DBG("%s", hdev->name);
+
+	/* Set the default boot parameter to 0x0 and it is updated to
+	 * SKU specific boot parameter after reading Intel_Write_Boot_Params
+	 * command while downloading the firmware.
+	 */
+	boot_param = 0x00000000;
+
+	btintel_set_flag(hdev, INTEL_BOOTLOADER);
+
+	err = btintel_download_fw(hdev, ver, &params, &boot_param);
+	if (err)
+		return err;
+
+	/* controller is already having an operational firmware */
+	if (ver->fw_variant == 0x23)
+		goto finish;
+
+	err = btintel_boot(hdev, boot_param);
+	if (err)
+		return err;
+
+	btintel_clear_flag(hdev, INTEL_BOOTLOADER);
+
+	err = btintel_get_fw_name(ver, &params, ddcname,
+						sizeof(ddcname), "ddc");
+
+	if (err < 0) {
+		bt_dev_err(hdev, "Unsupported Intel firmware naming");
+	} else {
+		/* Once the device is running in operational mode, it needs to
+		 * apply the device configuration (DDC) parameters.
+		 *
+		 * The device can work without DDC parameters, so even if it
+		 * fails to load the file, no need to fail the setup.
+		 */
+		btintel_load_ddc_config(hdev, ddcname);
+	}
+
+	hci_dev_clear_flag(hdev, HCI_QUALITY_REPORT);
+
+	/* Read the Intel version information after loading the FW  */
+	err = btintel_read_version(hdev, &new_ver);
+	if (err)
+		return err;
+
+	btintel_version_info(hdev, &new_ver);
+
+finish:
+	/* Set the event mask for Intel specific vendor events. This enables
+	 * a few extra events that are useful during general operation. It
+	 * does not enable any debugging related events.
+	 *
+	 * The device will function correctly without these events enabled
+	 * and thus no need to fail the setup.
+	 */
+	btintel_set_event_mask(hdev, false);
+
+	return 0;
+}
+
+static void btintel_get_fw_name_tlv(const struct intel_version_tlv *ver,
+				    char *fw_name, size_t len,
+				    const char *suffix)
+{
+	/* The firmware file name for new generation controllers will be
+	 * ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step>
+	 */
+	snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s",
+		 INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvi_top),
+					  INTEL_CNVX_TOP_STEP(ver->cnvi_top)),
+		 INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvr_top),
+					  INTEL_CNVX_TOP_STEP(ver->cnvr_top)),
+		 suffix);
+}
+
+static int btintel_prepare_fw_download_tlv(struct hci_dev *hdev,
+					   struct intel_version_tlv *ver,
+					   u32 *boot_param)
+{
+	const struct firmware *fw;
+	char fwname[64];
+	int err;
+	ktime_t calltime;
+
+	if (!ver || !boot_param)
+		return -EINVAL;
+
+	/* The firmware variant determines if the device is in bootloader
+	 * mode or is running operational firmware. The value 0x03 identifies
+	 * the bootloader and the value 0x23 identifies the operational
+	 * firmware.
+	 *
+	 * When the operational firmware is already present, then only
+	 * the check for valid Bluetooth device address is needed. This
+	 * determines if the device will be added as configured or
+	 * unconfigured controller.
+	 *
+	 * It is not possible to use the Secure Boot Parameters in this
+	 * case since that command is only available in bootloader mode.
+	 */
+	if (ver->img_type == 0x03) {
+		btintel_clear_flag(hdev, INTEL_BOOTLOADER);
+		btintel_check_bdaddr(hdev);
+	} else {
+		/*
+		 * Check for valid bd address in boot loader mode. Device
+		 * will be marked as unconfigured if empty bd address is
+		 * found.
+		 */
+		if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) {
+			bt_dev_info(hdev, "No device address configured");
+			set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+		}
+	}
+
+	btintel_get_fw_name_tlv(ver, fwname, sizeof(fwname), "sfi");
+	err = firmware_request_nowarn(&fw, fwname, &hdev->dev);
+	if (err < 0) {
+		if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
+			/* Firmware has already been loaded */
+			btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+			return 0;
+		}
+
+		bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)",
+			   fwname, err);
+
+		return err;
+	}
+
+	bt_dev_info(hdev, "Found device firmware: %s", fwname);
+
+	if (fw->size < 644) {
+		bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
+			   fw->size);
+		err = -EBADF;
+		goto done;
+	}
+
+	calltime = ktime_get();
+
+	btintel_set_flag(hdev, INTEL_DOWNLOADING);
+
+	/* Start firmware downloading and get boot parameter */
+	err = btintel_download_fw_tlv(hdev, ver, fw, boot_param,
+					       INTEL_HW_VARIANT(ver->cnvi_bt),
+					       ver->sbe_type);
+	if (err < 0) {
+		if (err == -EALREADY) {
+			/* Firmware has already been loaded */
+			btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+			err = 0;
+			goto done;
+		}
+
+		/* When FW download fails, send Intel Reset to retry
+		 * FW download.
+		 */
+		btintel_reset_to_bootloader(hdev);
+		goto done;
+	}
+
+	/* Before switching the device into operational mode and with that
+	 * booting the loaded firmware, wait for the bootloader notification
+	 * that all fragments have been successfully received.
+	 *
+	 * When the event processing receives the notification, then the
+	 * BTUSB_DOWNLOADING flag will be cleared.
+	 *
+	 * The firmware loading should not take longer than 5 seconds
+	 * and thus just timeout if that happens and fail the setup
+	 * of this device.
+	 */
+	err = btintel_download_wait(hdev, calltime, 5000);
+	if (err == -ETIMEDOUT)
+		btintel_reset_to_bootloader(hdev);
+
+done:
+	release_firmware(fw);
+	return err;
+}
+
+static int btintel_get_codec_config_data(struct hci_dev *hdev,
+					 __u8 link, struct bt_codec *codec,
+					 __u8 *ven_len, __u8 **ven_data)
+{
+	int err = 0;
+
+	if (!ven_data || !ven_len)
+		return -EINVAL;
+
+	*ven_len = 0;
+	*ven_data = NULL;
+
+	if (link != ESCO_LINK) {
+		bt_dev_err(hdev, "Invalid link type(%u)", link);
+		return -EINVAL;
+	}
+
+	*ven_data = kmalloc(sizeof(__u8), GFP_KERNEL);
+	if (!*ven_data) {
+		err = -ENOMEM;
+		goto error;
+	}
+
+	/* supports only CVSD and mSBC offload codecs */
+	switch (codec->id) {
+	case 0x02:
+		**ven_data = 0x00;
+		break;
+	case 0x05:
+		**ven_data = 0x01;
+		break;
+	default:
+		err = -EINVAL;
+		bt_dev_err(hdev, "Invalid codec id(%u)", codec->id);
+		goto error;
+	}
+	/* codec and its capabilities are pre-defined to ids
+	 * preset id = 0x00 represents CVSD codec with sampling rate 8K
+	 * preset id = 0x01 represents mSBC codec with sampling rate 16K
+	 */
+	*ven_len = sizeof(__u8);
+	return err;
+
+error:
+	kfree(*ven_data);
+	*ven_data = NULL;
+	return err;
+}
+
+static int btintel_get_data_path_id(struct hci_dev *hdev, __u8 *data_path_id)
+{
+	/* Intel uses 1 as data path id for all the usecases */
+	*data_path_id = 1;
+	return 0;
+}
+
+static int btintel_configure_offload(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	int err = 0;
+	struct intel_offload_use_cases *use_cases;
+
+	skb = __hci_cmd_sync(hdev, 0xfc86, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading offload use cases failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->len < sizeof(*use_cases)) {
+		err = -EIO;
+		goto error;
+	}
+
+	use_cases = (void *)skb->data;
+
+	if (use_cases->status) {
+		err = -bt_to_errno(skb->data[0]);
+		goto error;
+	}
+
+	if (use_cases->preset[0] & 0x03) {
+		hdev->get_data_path_id = btintel_get_data_path_id;
+		hdev->get_codec_config_data = btintel_get_codec_config_data;
+	}
+error:
+	kfree_skb(skb);
+	return err;
+}
+
+static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,
+					struct intel_version_tlv *ver)
+{
+	u32 boot_param;
+	char ddcname[64];
+	int err;
+	struct intel_version_tlv new_ver;
+
+	bt_dev_dbg(hdev, "");
+
+	/* Set the default boot parameter to 0x0 and it is updated to
+	 * SKU specific boot parameter after reading Intel_Write_Boot_Params
+	 * command while downloading the firmware.
+	 */
+	boot_param = 0x00000000;
+
+	btintel_set_flag(hdev, INTEL_BOOTLOADER);
+
+	err = btintel_prepare_fw_download_tlv(hdev, ver, &boot_param);
+	if (err)
+		return err;
+
+	/* check if controller is already having an operational firmware */
+	if (ver->img_type == 0x03)
+		goto finish;
+
+	err = btintel_boot(hdev, boot_param);
+	if (err)
+		return err;
+
+	btintel_clear_flag(hdev, INTEL_BOOTLOADER);
+
+	btintel_get_fw_name_tlv(ver, ddcname, sizeof(ddcname), "ddc");
+	/* Once the device is running in operational mode, it needs to
+	 * apply the device configuration (DDC) parameters.
+	 *
+	 * The device can work without DDC parameters, so even if it
+	 * fails to load the file, no need to fail the setup.
+	 */
+	btintel_load_ddc_config(hdev, ddcname);
+
+	/* Read supported use cases and set callbacks to fetch datapath id */
+	btintel_configure_offload(hdev);
+
+	hci_dev_clear_flag(hdev, HCI_QUALITY_REPORT);
+
+	/* Read the Intel version information after loading the FW  */
+	err = btintel_read_version_tlv(hdev, &new_ver);
+	if (err)
+		return err;
+
+	btintel_version_info_tlv(hdev, &new_ver);
+
+finish:
+	/* Set the event mask for Intel specific vendor events. This enables
+	 * a few extra events that are useful during general operation. It
+	 * does not enable any debugging related events.
+	 *
+	 * The device will function correctly without these events enabled
+	 * and thus no need to fail the setup.
+	 */
+	btintel_set_event_mask(hdev, false);
+
+	return 0;
+}
+
+static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant)
+{
+	switch (hw_variant) {
+	/* Legacy bootloader devices that supports MSFT Extension */
+	case 0x11:	/* JfP */
+	case 0x12:	/* ThP */
+	case 0x13:	/* HrP */
+	case 0x14:	/* CcP */
+	/* All Intel new genration controllers support the Microsoft vendor
+	 * extension are using 0xFC1E for VsMsftOpCode.
+	 */
+	case 0x17:
+	case 0x18:
+	case 0x19:
+	case 0x1b:
+		hci_set_msft_opcode(hdev, 0xFC1E);
+		break;
+	default:
+		/* Not supported */
+		break;
+	}
+}
+
+static int btintel_setup_combined(struct hci_dev *hdev)
+{
+	const u8 param[1] = { 0xFF };
+	struct intel_version ver;
+	struct intel_version_tlv ver_tlv;
+	struct sk_buff *skb;
+	int err;
+
+	BT_DBG("%s", hdev->name);
+
+	/* The some controllers have a bug with the first HCI command sent to it
+	 * returning number of completed commands as zero. This would stall the
+	 * command processing in the Bluetooth core.
+	 *
+	 * As a workaround, send HCI Reset command first which will reset the
+	 * number of completed commands and allow normal command processing
+	 * from now on.
+	 *
+	 * Regarding the INTEL_BROKEN_SHUTDOWN_LED flag, these devices maybe
+	 * in the SW_RFKILL ON state as a workaround of fixing LED issue during
+	 * the shutdown() procedure, and once the device is in SW_RFKILL ON
+	 * state, the only way to exit out of it is sending the HCI_Reset
+	 * command.
+	 */
+	if (btintel_test_flag(hdev, INTEL_BROKEN_INITIAL_NCMD) ||
+	    btintel_test_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED)) {
+		skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL,
+				     HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			bt_dev_err(hdev,
+				   "sending initial HCI reset failed (%ld)",
+				   PTR_ERR(skb));
+			return PTR_ERR(skb);
+		}
+		kfree_skb(skb);
+	}
+
+	/* Starting from TyP device, the command parameter and response are
+	 * changed even though the OCF for HCI_Intel_Read_Version command
+	 * remains same. The legacy devices can handle even if the
+	 * command has a parameter and returns a correct version information.
+	 * So, it uses new format to support both legacy and new format.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading Intel version command failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	/* Check the status */
+	if (skb->data[0]) {
+		bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
+			   skb->data[0]);
+		err = -EIO;
+		goto exit_error;
+	}
+
+	/* Apply the common HCI quirks for Intel device */
+	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+	set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
+
+	/* Set up the quality report callback for Intel devices */
+	hdev->set_quality_report = btintel_set_quality_report;
+
+	/* For Legacy device, check the HW platform value and size */
+	if (skb->len == sizeof(ver) && skb->data[1] == 0x37) {
+		bt_dev_dbg(hdev, "Read the legacy Intel version information");
+
+		memcpy(&ver, skb->data, sizeof(ver));
+
+		/* Display version information */
+		btintel_version_info(hdev, &ver);
+
+		/* Check for supported iBT hardware variants of this firmware
+		 * loading method.
+		 *
+		 * This check has been put in place to ensure correct forward
+		 * compatibility options when newer hardware variants come
+		 * along.
+		 */
+		switch (ver.hw_variant) {
+		case 0x07:	/* WP */
+		case 0x08:	/* StP */
+			/* Legacy ROM product */
+			btintel_set_flag(hdev, INTEL_ROM_LEGACY);
+
+			/* Apply the device specific HCI quirks
+			 *
+			 * WBS for SdP - For the Legacy ROM products, only SdP
+			 * supports the WBS. But the version information is not
+			 * enough to use here because the StP2 and SdP have same
+			 * hw_variant and fw_variant. So, this flag is set by
+			 * the transport driver (btusb) based on the HW info
+			 * (idProduct)
+			 */
+			if (!btintel_test_flag(hdev,
+					       INTEL_ROM_LEGACY_NO_WBS_SUPPORT))
+				set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
+					&hdev->quirks);
+			if (ver.hw_variant == 0x08 && ver.fw_variant == 0x22)
+				set_bit(HCI_QUIRK_VALID_LE_STATES,
+					&hdev->quirks);
+
+			err = btintel_legacy_rom_setup(hdev, &ver);
+			break;
+		case 0x0b:      /* SfP */
+		case 0x11:      /* JfP */
+		case 0x12:      /* ThP */
+		case 0x13:      /* HrP */
+		case 0x14:      /* CcP */
+			set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+			fallthrough;
+		case 0x0c:	/* WsP */
+			/* Apply the device specific HCI quirks
+			 *
+			 * All Legacy bootloader devices support WBS
+			 */
+			set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
+				&hdev->quirks);
+
+			/* Setup MSFT Extension support */
+			btintel_set_msft_opcode(hdev, ver.hw_variant);
+
+			err = btintel_bootloader_setup(hdev, &ver);
+			break;
+		default:
+			bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
+				   ver.hw_variant);
+			err = -EINVAL;
+		}
+
+		goto exit_error;
+	}
+
+	/* memset ver_tlv to start with clean state as few fields are exclusive
+	 * to bootloader mode and are not populated in operational mode
+	 */
+	memset(&ver_tlv, 0, sizeof(ver_tlv));
+	/* For TLV type device, parse the tlv data */
+	err = btintel_parse_version_tlv(hdev, &ver_tlv, skb);
+	if (err) {
+		bt_dev_err(hdev, "Failed to parse TLV version information");
+		goto exit_error;
+	}
+
+	if (INTEL_HW_PLATFORM(ver_tlv.cnvi_bt) != 0x37) {
+		bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
+			   INTEL_HW_PLATFORM(ver_tlv.cnvi_bt));
+		err = -EINVAL;
+		goto exit_error;
+	}
+
+	/* Check for supported iBT hardware variants of this firmware
+	 * loading method.
+	 *
+	 * This check has been put in place to ensure correct forward
+	 * compatibility options when newer hardware variants come
+	 * along.
+	 */
+	switch (INTEL_HW_VARIANT(ver_tlv.cnvi_bt)) {
+	case 0x11:      /* JfP */
+	case 0x12:      /* ThP */
+	case 0x13:      /* HrP */
+	case 0x14:      /* CcP */
+		/* Some legacy bootloader devices starting from JfP,
+		 * the operational firmware supports both old and TLV based
+		 * HCI_Intel_Read_Version command based on the command
+		 * parameter.
+		 *
+		 * For upgrading firmware case, the TLV based version cannot
+		 * be used because the firmware filename for legacy bootloader
+		 * is based on the old format.
+		 *
+		 * Also, it is not easy to convert TLV based version from the
+		 * legacy version format.
+		 *
+		 * So, as a workaround for those devices, use the legacy
+		 * HCI_Intel_Read_Version to get the version information and
+		 * run the legacy bootloader setup.
+		 */
+		err = btintel_read_version(hdev, &ver);
+		if (err)
+			break;
+
+		/* Apply the device specific HCI quirks
+		 *
+		 * All Legacy bootloader devices support WBS
+		 */
+		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+
+		/* Set Valid LE States quirk */
+		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+
+		/* Setup MSFT Extension support */
+		btintel_set_msft_opcode(hdev, ver.hw_variant);
+
+		err = btintel_bootloader_setup(hdev, &ver);
+		break;
+	case 0x17:
+	case 0x18:
+	case 0x19:
+	case 0x1b:
+		/* Display version information of TLV type */
+		btintel_version_info_tlv(hdev, &ver_tlv);
+
+		/* Apply the device specific HCI quirks for TLV based devices
+		 *
+		 * All TLV based devices support WBS
+		 */
+		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+
+		/* Apply LE States quirk from solar onwards */
+		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+
+		/* Setup MSFT Extension support */
+		btintel_set_msft_opcode(hdev,
+					INTEL_HW_VARIANT(ver_tlv.cnvi_bt));
+
+		err = btintel_bootloader_setup_tlv(hdev, &ver_tlv);
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
+			   INTEL_HW_VARIANT(ver_tlv.cnvi_bt));
+		err = -EINVAL;
+		break;
+	}
+
+exit_error:
+	kfree_skb(skb);
+
+	return err;
+}
+
+static int btintel_shutdown_combined(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	int ret;
+
+	/* Send HCI Reset to the controller to stop any BT activity which
+	 * were triggered. This will help to save power and maintain the
+	 * sync b/w Host and controller
+	 */
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "HCI reset during shutdown failed");
+		return PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+
+	/* Some platforms have an issue with BT LED when the interface is
+	 * down or BT radio is turned off, which takes 5 seconds to BT LED
+	 * goes off. As a workaround, sends HCI_Intel_SW_RFKILL to put the
+	 * device in the RFKILL ON state which turns off the BT LED immediately.
+	 */
+	if (btintel_test_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED)) {
+		skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			ret = PTR_ERR(skb);
+			bt_dev_err(hdev, "turning off Intel device LED failed");
+			return ret;
+		}
+		kfree_skb(skb);
+	}
+
+	return 0;
+}
+
+int btintel_configure_setup(struct hci_dev *hdev)
+{
+	hdev->manufacturer = 2;
+	hdev->setup = btintel_setup_combined;
+	hdev->shutdown = btintel_shutdown_combined;
+	hdev->hw_error = btintel_hw_error;
+	hdev->set_diag = btintel_set_diag_combined;
+	hdev->set_bdaddr = btintel_set_bdaddr;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_configure_setup);
+
+void btintel_bootup(struct hci_dev *hdev, const void *ptr, unsigned int len)
+{
+	const struct intel_bootup *evt = ptr;
+
+	if (len != sizeof(*evt))
+		return;
+
+	if (btintel_test_and_clear_flag(hdev, INTEL_BOOTING))
+		btintel_wake_up_flag(hdev, INTEL_BOOTING);
+}
+EXPORT_SYMBOL_GPL(btintel_bootup);
+
+void btintel_secure_send_result(struct hci_dev *hdev,
+				const void *ptr, unsigned int len)
+{
+	const struct intel_secure_send_result *evt = ptr;
+
+	if (len != sizeof(*evt))
+		return;
+
+	if (evt->result)
+		btintel_set_flag(hdev, INTEL_FIRMWARE_FAILED);
+
+	if (btintel_test_and_clear_flag(hdev, INTEL_DOWNLOADING) &&
+	    btintel_test_flag(hdev, INTEL_FIRMWARE_LOADED))
+		btintel_wake_up_flag(hdev, INTEL_DOWNLOADING);
+}
+EXPORT_SYMBOL_GPL(btintel_secure_send_result);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("intel/ibt-11-5.sfi");
+MODULE_FIRMWARE("intel/ibt-11-5.ddc");
+MODULE_FIRMWARE("intel/ibt-12-16.sfi");
+MODULE_FIRMWARE("intel/ibt-12-16.ddc");
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
new file mode 100644
index 000000000..e0060e585
--- /dev/null
+++ b/drivers/bluetooth/btintel.h
@@ -0,0 +1,309 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *
+ *  Bluetooth support for Intel devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ */
+
+/* List of tlv type */
+enum {
+	INTEL_TLV_CNVI_TOP = 0x10,
+	INTEL_TLV_CNVR_TOP,
+	INTEL_TLV_CNVI_BT,
+	INTEL_TLV_CNVR_BT,
+	INTEL_TLV_CNVI_OTP,
+	INTEL_TLV_CNVR_OTP,
+	INTEL_TLV_DEV_REV_ID,
+	INTEL_TLV_USB_VENDOR_ID,
+	INTEL_TLV_USB_PRODUCT_ID,
+	INTEL_TLV_PCIE_VENDOR_ID,
+	INTEL_TLV_PCIE_DEVICE_ID,
+	INTEL_TLV_PCIE_SUBSYSTEM_ID,
+	INTEL_TLV_IMAGE_TYPE,
+	INTEL_TLV_TIME_STAMP,
+	INTEL_TLV_BUILD_TYPE,
+	INTEL_TLV_BUILD_NUM,
+	INTEL_TLV_FW_BUILD_PRODUCT,
+	INTEL_TLV_FW_BUILD_HW,
+	INTEL_TLV_FW_STEP,
+	INTEL_TLV_BT_SPEC,
+	INTEL_TLV_MFG_NAME,
+	INTEL_TLV_HCI_REV,
+	INTEL_TLV_LMP_SUBVER,
+	INTEL_TLV_OTP_PATCH_VER,
+	INTEL_TLV_SECURE_BOOT,
+	INTEL_TLV_KEY_FROM_HDR,
+	INTEL_TLV_OTP_LOCK,
+	INTEL_TLV_API_LOCK,
+	INTEL_TLV_DEBUG_LOCK,
+	INTEL_TLV_MIN_FW,
+	INTEL_TLV_LIMITED_CCE,
+	INTEL_TLV_SBE_TYPE,
+	INTEL_TLV_OTP_BDADDR,
+	INTEL_TLV_UNLOCKED_STATE
+};
+
+struct intel_tlv {
+	u8 type;
+	u8 len;
+	u8 val[];
+} __packed;
+
+struct intel_version_tlv {
+	u32	cnvi_top;
+	u32	cnvr_top;
+	u32	cnvi_bt;
+	u32	cnvr_bt;
+	u16	dev_rev_id;
+	u8	img_type;
+	u16	timestamp;
+	u8	build_type;
+	u32	build_num;
+	u8	secure_boot;
+	u8	otp_lock;
+	u8	api_lock;
+	u8	debug_lock;
+	u8	min_fw_build_nn;
+	u8	min_fw_build_cw;
+	u8	min_fw_build_yy;
+	u8	limited_cce;
+	u8	sbe_type;
+	bdaddr_t otp_bd_addr;
+};
+
+struct intel_version {
+	u8 status;
+	u8 hw_platform;
+	u8 hw_variant;
+	u8 hw_revision;
+	u8 fw_variant;
+	u8 fw_revision;
+	u8 fw_build_num;
+	u8 fw_build_ww;
+	u8 fw_build_yy;
+	u8 fw_patch_num;
+} __packed;
+
+struct intel_boot_params {
+	__u8     status;
+	__u8     otp_format;
+	__u8     otp_content;
+	__u8     otp_patch;
+	__le16   dev_revid;
+	__u8     secure_boot;
+	__u8     key_from_hdr;
+	__u8     key_type;
+	__u8     otp_lock;
+	__u8     api_lock;
+	__u8     debug_lock;
+	bdaddr_t otp_bdaddr;
+	__u8     min_fw_build_nn;
+	__u8     min_fw_build_cw;
+	__u8     min_fw_build_yy;
+	__u8     limited_cce;
+	__u8     unlocked_state;
+} __packed;
+
+struct intel_bootup {
+	__u8     zero;
+	__u8     num_cmds;
+	__u8     source;
+	__u8     reset_type;
+	__u8     reset_reason;
+	__u8     ddc_status;
+} __packed;
+
+struct intel_secure_send_result {
+	__u8     result;
+	__le16   opcode;
+	__u8     status;
+} __packed;
+
+struct intel_reset {
+	__u8     reset_type;
+	__u8     patch_enable;
+	__u8     ddc_reload;
+	__u8     boot_option;
+	__le32   boot_param;
+} __packed;
+
+struct intel_debug_features {
+	__u8    page1[16];
+} __packed;
+
+struct intel_offload_use_cases {
+	__u8	status;
+	__u8	preset[8];
+} __packed;
+
+#define INTEL_HW_PLATFORM(cnvx_bt)	((u8)(((cnvx_bt) & 0x0000ff00) >> 8))
+#define INTEL_HW_VARIANT(cnvx_bt)	((u8)(((cnvx_bt) & 0x003f0000) >> 16))
+#define INTEL_CNVX_TOP_TYPE(cnvx_top)	((cnvx_top) & 0x00000fff)
+#define INTEL_CNVX_TOP_STEP(cnvx_top)	(((cnvx_top) & 0x0f000000) >> 24)
+#define INTEL_CNVX_TOP_PACK_SWAB(t, s)	__swab16(((__u16)(((t) << 4) | (s))))
+
+enum {
+	INTEL_BOOTLOADER,
+	INTEL_DOWNLOADING,
+	INTEL_FIRMWARE_LOADED,
+	INTEL_FIRMWARE_FAILED,
+	INTEL_BOOTING,
+	INTEL_BROKEN_INITIAL_NCMD,
+	INTEL_BROKEN_SHUTDOWN_LED,
+	INTEL_ROM_LEGACY,
+	INTEL_ROM_LEGACY_NO_WBS_SUPPORT,
+
+	__INTEL_NUM_FLAGS,
+};
+
+struct btintel_data {
+	DECLARE_BITMAP(flags, __INTEL_NUM_FLAGS);
+};
+
+#define btintel_set_flag(hdev, nr)					\
+	do {								\
+		struct btintel_data *intel = hci_get_priv((hdev));	\
+		set_bit((nr), intel->flags);				\
+	} while (0)
+
+#define btintel_clear_flag(hdev, nr)					\
+	do {								\
+		struct btintel_data *intel = hci_get_priv((hdev));	\
+		clear_bit((nr), intel->flags);				\
+	} while (0)
+
+#define btintel_wake_up_flag(hdev, nr)					\
+	do {								\
+		struct btintel_data *intel = hci_get_priv((hdev));	\
+		wake_up_bit(intel->flags, (nr));			\
+	} while (0)
+
+#define btintel_get_flag(hdev)						\
+	(((struct btintel_data *)hci_get_priv(hdev))->flags)
+
+#define btintel_test_flag(hdev, nr)	test_bit((nr), btintel_get_flag(hdev))
+#define btintel_test_and_clear_flag(hdev, nr) test_and_clear_bit((nr), btintel_get_flag(hdev))
+#define btintel_wait_on_flag_timeout(hdev, nr, m, to)			\
+		wait_on_bit_timeout(btintel_get_flag(hdev), (nr), m, to)
+
+#if IS_ENABLED(CONFIG_BT_INTEL)
+
+int btintel_check_bdaddr(struct hci_dev *hdev);
+int btintel_enter_mfg(struct hci_dev *hdev);
+int btintel_exit_mfg(struct hci_dev *hdev, bool reset, bool patched);
+int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+int btintel_set_diag(struct hci_dev *hdev, bool enable);
+
+int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver);
+int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name);
+int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug);
+int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver);
+struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
+				   u16 opcode_write);
+int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param);
+int btintel_read_boot_params(struct hci_dev *hdev,
+			     struct intel_boot_params *params);
+int btintel_download_firmware(struct hci_dev *dev, struct intel_version *ver,
+			      const struct firmware *fw, u32 *boot_param);
+int btintel_configure_setup(struct hci_dev *hdev);
+void btintel_bootup(struct hci_dev *hdev, const void *ptr, unsigned int len);
+void btintel_secure_send_result(struct hci_dev *hdev,
+				const void *ptr, unsigned int len);
+int btintel_set_quality_report(struct hci_dev *hdev, bool enable);
+#else
+
+static inline int btintel_check_bdaddr(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btintel_enter_mfg(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btintel_exit_mfg(struct hci_dev *hdev, bool reset, bool patched)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btintel_set_diag(struct hci_dev *hdev, bool enable)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btintel_version_info(struct hci_dev *hdev,
+				       struct intel_version *ver)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btintel_load_ddc_config(struct hci_dev *hdev,
+					  const char *ddc_name)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btintel_read_version(struct hci_dev *hdev,
+				       struct intel_version *ver)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline struct regmap *btintel_regmap_init(struct hci_dev *hdev,
+						 u16 opcode_read,
+						 u16 opcode_write)
+{
+	return ERR_PTR(-EINVAL);
+}
+
+static inline int btintel_send_intel_reset(struct hci_dev *hdev,
+					   u32 reset_param)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btintel_read_boot_params(struct hci_dev *hdev,
+					   struct intel_boot_params *params)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btintel_download_firmware(struct hci_dev *dev,
+					    const struct firmware *fw,
+					    u32 *boot_param)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btintel_configure_setup(struct hci_dev *hdev)
+{
+	return -ENODEV;
+}
+
+static inline void btintel_bootup(struct hci_dev *hdev,
+				  const void *ptr, unsigned int len)
+{
+}
+
+static inline void btintel_secure_send_result(struct hci_dev *hdev,
+				const void *ptr, unsigned int len)
+{
+}
+
+static inline int btintel_set_quality_report(struct hci_dev *hdev, bool enable)
+{
+	return -ENODEV;
+}
+#endif
diff --git a/drivers/bluetooth/btmrvl_debugfs.c b/drivers/bluetooth/btmrvl_debugfs.c
new file mode 100644
index 000000000..32329a2e5
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_debugfs.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Marvell Bluetooth driver: debugfs related functions
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ **/
+
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btmrvl_drv.h"
+
+struct btmrvl_debugfs_data {
+	struct dentry *config_dir;
+	struct dentry *status_dir;
+};
+
+static ssize_t btmrvl_hscfgcmd_write(struct file *file,
+			const char __user *ubuf, size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	long result, ret;
+
+	ret = kstrtol_from_user(ubuf, count, 10, &result);
+	if (ret)
+		return ret;
+
+	priv->btmrvl_dev.hscfgcmd = result;
+
+	if (priv->btmrvl_dev.hscfgcmd) {
+		btmrvl_prepare_command(priv);
+		wake_up_interruptible(&priv->main_thread.wait_q);
+	}
+
+	return count;
+}
+
+static ssize_t btmrvl_hscfgcmd_read(struct file *file, char __user *userbuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	int ret;
+
+	ret = snprintf(buf, sizeof(buf) - 1, "%d\n",
+						priv->btmrvl_dev.hscfgcmd);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_hscfgcmd_fops = {
+	.read	= btmrvl_hscfgcmd_read,
+	.write	= btmrvl_hscfgcmd_write,
+	.open	= simple_open,
+	.llseek = default_llseek,
+};
+
+static ssize_t btmrvl_pscmd_write(struct file *file, const char __user *ubuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	long result, ret;
+
+	ret = kstrtol_from_user(ubuf, count, 10, &result);
+	if (ret)
+		return ret;
+
+	priv->btmrvl_dev.pscmd = result;
+
+	if (priv->btmrvl_dev.pscmd) {
+		btmrvl_prepare_command(priv);
+		wake_up_interruptible(&priv->main_thread.wait_q);
+	}
+
+	return count;
+
+}
+
+static ssize_t btmrvl_pscmd_read(struct file *file, char __user *userbuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	int ret;
+
+	ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->btmrvl_dev.pscmd);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_pscmd_fops = {
+	.read = btmrvl_pscmd_read,
+	.write = btmrvl_pscmd_write,
+	.open = simple_open,
+	.llseek = default_llseek,
+};
+
+static ssize_t btmrvl_hscmd_write(struct file *file, const char __user *ubuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	long result, ret;
+
+	ret = kstrtol_from_user(ubuf, count, 10, &result);
+	if (ret)
+		return ret;
+
+	priv->btmrvl_dev.hscmd = result;
+	if (priv->btmrvl_dev.hscmd) {
+		btmrvl_prepare_command(priv);
+		wake_up_interruptible(&priv->main_thread.wait_q);
+	}
+
+	return count;
+}
+
+static ssize_t btmrvl_hscmd_read(struct file *file, char __user *userbuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	int ret;
+
+	ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->btmrvl_dev.hscmd);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_hscmd_fops = {
+	.read	= btmrvl_hscmd_read,
+	.write	= btmrvl_hscmd_write,
+	.open	= simple_open,
+	.llseek = default_llseek,
+};
+
+void btmrvl_debugfs_init(struct hci_dev *hdev)
+{
+	struct btmrvl_private *priv = hci_get_drvdata(hdev);
+	struct btmrvl_debugfs_data *dbg;
+
+	if (!hdev->debugfs)
+		return;
+
+	dbg = kzalloc(sizeof(*dbg), GFP_KERNEL);
+	priv->debugfs_data = dbg;
+
+	if (!dbg) {
+		BT_ERR("Can not allocate memory for btmrvl_debugfs_data.");
+		return;
+	}
+
+	dbg->config_dir = debugfs_create_dir("config", hdev->debugfs);
+
+	debugfs_create_u8("psmode", 0644, dbg->config_dir,
+			  &priv->btmrvl_dev.psmode);
+	debugfs_create_file("pscmd", 0644, dbg->config_dir,
+			    priv, &btmrvl_pscmd_fops);
+	debugfs_create_x16("gpiogap", 0644, dbg->config_dir,
+			   &priv->btmrvl_dev.gpio_gap);
+	debugfs_create_u8("hsmode", 0644, dbg->config_dir,
+			  &priv->btmrvl_dev.hsmode);
+	debugfs_create_file("hscmd", 0644, dbg->config_dir,
+			    priv, &btmrvl_hscmd_fops);
+	debugfs_create_file("hscfgcmd", 0644, dbg->config_dir,
+			    priv, &btmrvl_hscfgcmd_fops);
+
+	dbg->status_dir = debugfs_create_dir("status", hdev->debugfs);
+	debugfs_create_u8("curpsmode", 0444, dbg->status_dir,
+			  &priv->adapter->psmode);
+	debugfs_create_u8("psstate", 0444, dbg->status_dir,
+			  &priv->adapter->ps_state);
+	debugfs_create_u8("hsstate", 0444, dbg->status_dir,
+			  &priv->adapter->hs_state);
+	debugfs_create_u8("txdnldready", 0444, dbg->status_dir,
+			  &priv->btmrvl_dev.tx_dnld_rdy);
+}
+
+void btmrvl_debugfs_remove(struct hci_dev *hdev)
+{
+	struct btmrvl_private *priv = hci_get_drvdata(hdev);
+	struct btmrvl_debugfs_data *dbg = priv->debugfs_data;
+
+	if (!dbg)
+		return;
+
+	debugfs_remove_recursive(dbg->config_dir);
+	debugfs_remove_recursive(dbg->status_dir);
+
+	kfree(dbg);
+}
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
new file mode 100644
index 000000000..d7df05c56
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -0,0 +1,173 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Marvell Bluetooth driver: global definitions & declarations
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ */
+
+#include <linux/kthread.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <net/bluetooth/bluetooth.h>
+#include <linux/err.h>
+#include <linux/gfp.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/of_irq.h>
+
+#define BTM_HEADER_LEN			4
+#define BTM_UPLD_SIZE			2312
+
+/* Time to wait until Host Sleep state change in millisecond */
+#define WAIT_UNTIL_HS_STATE_CHANGED	msecs_to_jiffies(5000)
+/* Time to wait for command response in millisecond */
+#define WAIT_UNTIL_CMD_RESP		msecs_to_jiffies(5000)
+
+enum rdwr_status {
+	RDWR_STATUS_SUCCESS = 0,
+	RDWR_STATUS_FAILURE = 1,
+	RDWR_STATUS_DONE = 2
+};
+
+#define FW_DUMP_MAX_NAME_LEN    8
+#define FW_DUMP_HOST_READY      0xEE
+#define FW_DUMP_DONE            0xFF
+#define FW_DUMP_READ_DONE       0xFE
+
+struct memory_type_mapping {
+	u8 mem_name[FW_DUMP_MAX_NAME_LEN];
+	u8 *mem_ptr;
+	u32 mem_size;
+	u8 done_flag;
+};
+
+struct btmrvl_thread {
+	struct task_struct *task;
+	wait_queue_head_t wait_q;
+	void *priv;
+};
+
+struct btmrvl_device {
+	void *card;
+	struct hci_dev *hcidev;
+
+	u8 dev_type;
+
+	u8 tx_dnld_rdy;
+
+	u8 psmode;
+	u8 pscmd;
+	u8 hsmode;
+	u8 hscmd;
+
+	/* Low byte is gap, high byte is GPIO */
+	u16 gpio_gap;
+
+	u8 hscfgcmd;
+	u8 sendcmdflag;
+};
+
+struct btmrvl_adapter {
+	void *hw_regs_buf;
+	u8 *hw_regs;
+	u32 int_count;
+	struct sk_buff_head tx_queue;
+	u8 psmode;
+	u8 ps_state;
+	u8 hs_state;
+	u8 wakeup_tries;
+	wait_queue_head_t cmd_wait_q;
+	wait_queue_head_t event_hs_wait_q;
+	u8 cmd_complete;
+	bool is_suspended;
+	bool is_suspending;
+};
+
+struct btmrvl_private {
+	struct btmrvl_device btmrvl_dev;
+	struct btmrvl_adapter *adapter;
+	struct btmrvl_thread main_thread;
+	int (*hw_host_to_card)(struct btmrvl_private *priv,
+				u8 *payload, u16 nb);
+	int (*hw_wakeup_firmware)(struct btmrvl_private *priv);
+	int (*hw_process_int_status)(struct btmrvl_private *priv);
+	spinlock_t driver_lock;		/* spinlock used by driver */
+#ifdef CONFIG_DEBUG_FS
+	void *debugfs_data;
+#endif
+	bool surprise_removed;
+};
+
+#define MRVL_VENDOR_PKT			0xFE
+
+/* Vendor specific Bluetooth commands */
+#define BT_CMD_PSCAN_WIN_REPORT_ENABLE	0xFC03
+#define BT_CMD_ROUTE_SCO_TO_HOST	0xFC1D
+#define BT_CMD_SET_BDADDR		0xFC22
+#define BT_CMD_AUTO_SLEEP_MODE		0xFC23
+#define BT_CMD_HOST_SLEEP_CONFIG	0xFC59
+#define BT_CMD_HOST_SLEEP_ENABLE	0xFC5A
+#define BT_CMD_MODULE_CFG_REQ		0xFC5B
+#define BT_CMD_LOAD_CONFIG_DATA		0xFC61
+
+/* Sub-commands: Module Bringup/Shutdown Request/Response */
+#define MODULE_BRINGUP_REQ		0xF1
+#define MODULE_BROUGHT_UP		0x00
+#define MODULE_ALREADY_UP		0x0C
+
+#define MODULE_SHUTDOWN_REQ		0xF2
+
+/* Vendor specific Bluetooth events */
+#define BT_EVENT_AUTO_SLEEP_MODE	0x23
+#define BT_EVENT_HOST_SLEEP_CONFIG	0x59
+#define BT_EVENT_HOST_SLEEP_ENABLE	0x5A
+#define BT_EVENT_MODULE_CFG_REQ		0x5B
+#define BT_EVENT_POWER_STATE		0x20
+
+/* Bluetooth Power States */
+#define BT_PS_ENABLE			0x02
+#define BT_PS_DISABLE			0x03
+#define BT_PS_SLEEP			0x01
+
+/* Host Sleep states */
+#define HS_ACTIVATED			0x01
+#define HS_DEACTIVATED			0x00
+
+/* Power Save modes */
+#define PS_SLEEP			0x01
+#define PS_AWAKE			0x00
+
+#define BT_CAL_HDR_LEN			4
+#define BT_CAL_DATA_SIZE		28
+
+struct btmrvl_event {
+	u8 ec;		/* event counter */
+	u8 length;
+	u8 data[4];
+} __packed;
+
+/* Prototype of global function */
+
+int btmrvl_register_hdev(struct btmrvl_private *priv);
+struct btmrvl_private *btmrvl_add_card(void *card);
+int btmrvl_remove_card(struct btmrvl_private *priv);
+
+void btmrvl_interrupt(struct btmrvl_private *priv);
+
+bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
+int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb);
+
+int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, u8 subcmd);
+int btmrvl_pscan_window_reporting(struct btmrvl_private *priv, u8 subcmd);
+int btmrvl_send_hscfg_cmd(struct btmrvl_private *priv);
+int btmrvl_enable_ps(struct btmrvl_private *priv);
+int btmrvl_prepare_command(struct btmrvl_private *priv);
+int btmrvl_enable_hs(struct btmrvl_private *priv);
+
+#ifdef CONFIG_DEBUG_FS
+void btmrvl_debugfs_init(struct hci_dev *hdev);
+void btmrvl_debugfs_remove(struct hci_dev *hdev);
+#endif
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
new file mode 100644
index 000000000..9658b33c8
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -0,0 +1,793 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Marvell Bluetooth driver
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ **/
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+#include <linux/mmc/sdio_func.h>
+
+#include "btmrvl_drv.h"
+#include "btmrvl_sdio.h"
+
+#define VERSION "1.0"
+
+/*
+ * This function is called by interface specific interrupt handler.
+ * It updates Power Save & Host Sleep states, and wakes up the main
+ * thread.
+ */
+void btmrvl_interrupt(struct btmrvl_private *priv)
+{
+	priv->adapter->ps_state = PS_AWAKE;
+
+	priv->adapter->wakeup_tries = 0;
+
+	priv->adapter->int_count++;
+
+	if (priv->adapter->hs_state == HS_ACTIVATED) {
+		BT_DBG("BT: HS DEACTIVATED in ISR!");
+		priv->adapter->hs_state = HS_DEACTIVATED;
+	}
+
+	wake_up_interruptible(&priv->main_thread.wait_q);
+}
+EXPORT_SYMBOL_GPL(btmrvl_interrupt);
+
+bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
+{
+	struct hci_event_hdr *hdr = (void *) skb->data;
+
+	if (hdr->evt == HCI_EV_CMD_COMPLETE) {
+		struct hci_ev_cmd_complete *ec;
+		u16 opcode;
+
+		ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE);
+		opcode = __le16_to_cpu(ec->opcode);
+
+		if (priv->btmrvl_dev.sendcmdflag) {
+			priv->btmrvl_dev.sendcmdflag = false;
+			priv->adapter->cmd_complete = true;
+			wake_up_interruptible(&priv->adapter->cmd_wait_q);
+
+			if (hci_opcode_ogf(opcode) == 0x3F) {
+				BT_DBG("vendor event skipped: opcode=%#4.4x",
+				       opcode);
+				kfree_skb(skb);
+				return false;
+			}
+		}
+	}
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(btmrvl_check_evtpkt);
+
+int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
+{
+	struct btmrvl_adapter *adapter = priv->adapter;
+	struct btmrvl_event *event;
+	int ret = 0;
+
+	event = (struct btmrvl_event *) skb->data;
+	if (event->ec != 0xff) {
+		BT_DBG("Not Marvell Event=%x", event->ec);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (event->data[0]) {
+	case BT_EVENT_AUTO_SLEEP_MODE:
+		if (!event->data[2]) {
+			if (event->data[1] == BT_PS_ENABLE)
+				adapter->psmode = 1;
+			else
+				adapter->psmode = 0;
+			BT_DBG("PS Mode:%s",
+				(adapter->psmode) ? "Enable" : "Disable");
+		} else {
+			BT_DBG("PS Mode command failed");
+		}
+		break;
+
+	case BT_EVENT_HOST_SLEEP_CONFIG:
+		if (!event->data[3])
+			BT_DBG("gpio=%x, gap=%x", event->data[1],
+							event->data[2]);
+		else
+			BT_DBG("HSCFG command failed");
+		break;
+
+	case BT_EVENT_HOST_SLEEP_ENABLE:
+		if (!event->data[1]) {
+			adapter->hs_state = HS_ACTIVATED;
+			if (adapter->psmode)
+				adapter->ps_state = PS_SLEEP;
+			wake_up_interruptible(&adapter->event_hs_wait_q);
+			BT_DBG("HS ACTIVATED!");
+		} else {
+			BT_DBG("HS Enable failed");
+		}
+		break;
+
+	case BT_EVENT_MODULE_CFG_REQ:
+		if (priv->btmrvl_dev.sendcmdflag &&
+				event->data[1] == MODULE_BRINGUP_REQ) {
+			BT_DBG("EVENT:%s",
+				((event->data[2] == MODULE_BROUGHT_UP) ||
+				(event->data[2] == MODULE_ALREADY_UP)) ?
+				"Bring-up succeed" : "Bring-up failed");
+
+			if (event->length > 3 && event->data[3])
+				priv->btmrvl_dev.dev_type = HCI_AMP;
+			else
+				priv->btmrvl_dev.dev_type = HCI_PRIMARY;
+
+			BT_DBG("dev_type: %d", priv->btmrvl_dev.dev_type);
+		} else if (priv->btmrvl_dev.sendcmdflag &&
+				event->data[1] == MODULE_SHUTDOWN_REQ) {
+			BT_DBG("EVENT:%s", (event->data[2]) ?
+				"Shutdown failed" : "Shutdown succeed");
+		} else {
+			BT_DBG("BT_CMD_MODULE_CFG_REQ resp for APP");
+			ret = -EINVAL;
+		}
+		break;
+
+	case BT_EVENT_POWER_STATE:
+		if (event->data[1] == BT_PS_SLEEP)
+			adapter->ps_state = PS_SLEEP;
+		BT_DBG("EVENT:%s",
+			(adapter->ps_state) ? "PS_SLEEP" : "PS_AWAKE");
+		break;
+
+	default:
+		BT_DBG("Unknown Event=%d", event->data[0]);
+		ret = -EINVAL;
+		break;
+	}
+
+exit:
+	if (!ret)
+		kfree_skb(skb);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(btmrvl_process_event);
+
+static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 opcode,
+				const void *param, u8 len)
+{
+	struct sk_buff *skb;
+	struct hci_command_hdr *hdr;
+
+	if (priv->surprise_removed) {
+		BT_ERR("Card is removed");
+		return -EFAULT;
+	}
+
+	skb = bt_skb_alloc(HCI_COMMAND_HDR_SIZE + len, GFP_KERNEL);
+	if (!skb) {
+		BT_ERR("No free skb");
+		return -ENOMEM;
+	}
+
+	hdr = skb_put(skb, HCI_COMMAND_HDR_SIZE);
+	hdr->opcode = cpu_to_le16(opcode);
+	hdr->plen = len;
+
+	if (len)
+		skb_put_data(skb, param, len);
+
+	hci_skb_pkt_type(skb) = MRVL_VENDOR_PKT;
+
+	skb_queue_head(&priv->adapter->tx_queue, skb);
+
+	priv->btmrvl_dev.sendcmdflag = true;
+
+	priv->adapter->cmd_complete = false;
+
+	wake_up_interruptible(&priv->main_thread.wait_q);
+
+	if (!wait_event_interruptible_timeout(priv->adapter->cmd_wait_q,
+					      priv->adapter->cmd_complete ||
+					      priv->surprise_removed,
+					      WAIT_UNTIL_CMD_RESP))
+		return -ETIMEDOUT;
+
+	if (priv->surprise_removed)
+		return -EFAULT;
+
+	return 0;
+}
+
+int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, u8 subcmd)
+{
+	int ret;
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_MODULE_CFG_REQ, &subcmd, 1);
+	if (ret)
+		BT_ERR("module_cfg_cmd(%x) failed", subcmd);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(btmrvl_send_module_cfg_cmd);
+
+static int btmrvl_enable_sco_routing_to_host(struct btmrvl_private *priv)
+{
+	int ret;
+	u8 subcmd = 0;
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_ROUTE_SCO_TO_HOST, &subcmd, 1);
+	if (ret)
+		BT_ERR("BT_CMD_ROUTE_SCO_TO_HOST command failed: %#x", ret);
+
+	return ret;
+}
+
+int btmrvl_pscan_window_reporting(struct btmrvl_private *priv, u8 subcmd)
+{
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+	int ret;
+
+	if (!card->support_pscan_win_report)
+		return 0;
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_PSCAN_WIN_REPORT_ENABLE,
+				   &subcmd, 1);
+	if (ret)
+		BT_ERR("PSCAN_WIN_REPORT_ENABLE command failed: %#x", ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(btmrvl_pscan_window_reporting);
+
+int btmrvl_send_hscfg_cmd(struct btmrvl_private *priv)
+{
+	int ret;
+	u8 param[2];
+
+	param[0] = (priv->btmrvl_dev.gpio_gap & 0xff00) >> 8;
+	param[1] = (u8) (priv->btmrvl_dev.gpio_gap & 0x00ff);
+
+	BT_DBG("Sending HSCFG Command, gpio=0x%x, gap=0x%x",
+	       param[0], param[1]);
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_HOST_SLEEP_CONFIG, param, 2);
+	if (ret)
+		BT_ERR("HSCFG command failed");
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(btmrvl_send_hscfg_cmd);
+
+int btmrvl_enable_ps(struct btmrvl_private *priv)
+{
+	int ret;
+	u8 param;
+
+	if (priv->btmrvl_dev.psmode)
+		param = BT_PS_ENABLE;
+	else
+		param = BT_PS_DISABLE;
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_AUTO_SLEEP_MODE, &param, 1);
+	if (ret)
+		BT_ERR("PSMODE command failed");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btmrvl_enable_ps);
+
+int btmrvl_enable_hs(struct btmrvl_private *priv)
+{
+	struct btmrvl_adapter *adapter = priv->adapter;
+	int ret;
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_HOST_SLEEP_ENABLE, NULL, 0);
+	if (ret) {
+		BT_ERR("Host sleep enable command failed");
+		return ret;
+	}
+
+	ret = wait_event_interruptible_timeout(adapter->event_hs_wait_q,
+					       adapter->hs_state ||
+					       priv->surprise_removed,
+					       WAIT_UNTIL_HS_STATE_CHANGED);
+	if (ret < 0 || priv->surprise_removed) {
+		BT_ERR("event_hs_wait_q terminated (%d): %d,%d,%d",
+		       ret, adapter->hs_state, adapter->ps_state,
+		       adapter->wakeup_tries);
+	} else if (!ret) {
+		BT_ERR("hs_enable timeout: %d,%d,%d", adapter->hs_state,
+		       adapter->ps_state, adapter->wakeup_tries);
+		ret = -ETIMEDOUT;
+	} else {
+		BT_DBG("host sleep enabled: %d,%d,%d", adapter->hs_state,
+		       adapter->ps_state, adapter->wakeup_tries);
+		ret = 0;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(btmrvl_enable_hs);
+
+int btmrvl_prepare_command(struct btmrvl_private *priv)
+{
+	int ret = 0;
+
+	if (priv->btmrvl_dev.hscfgcmd) {
+		priv->btmrvl_dev.hscfgcmd = 0;
+		btmrvl_send_hscfg_cmd(priv);
+	}
+
+	if (priv->btmrvl_dev.pscmd) {
+		priv->btmrvl_dev.pscmd = 0;
+		btmrvl_enable_ps(priv);
+	}
+
+	if (priv->btmrvl_dev.hscmd) {
+		priv->btmrvl_dev.hscmd = 0;
+
+		if (priv->btmrvl_dev.hsmode) {
+			ret = btmrvl_enable_hs(priv);
+		} else {
+			ret = priv->hw_wakeup_firmware(priv);
+			priv->adapter->hs_state = HS_DEACTIVATED;
+			BT_DBG("BT: HS DEACTIVATED due to host activity!");
+		}
+	}
+
+	return ret;
+}
+
+static int btmrvl_tx_pkt(struct btmrvl_private *priv, struct sk_buff *skb)
+{
+	int ret = 0;
+
+	if (!skb || !skb->data)
+		return -EINVAL;
+
+	if (!skb->len || ((skb->len + BTM_HEADER_LEN) > BTM_UPLD_SIZE)) {
+		BT_ERR("Tx Error: Bad skb length %d : %d",
+						skb->len, BTM_UPLD_SIZE);
+		return -EINVAL;
+	}
+
+	skb_push(skb, BTM_HEADER_LEN);
+
+	/* header type: byte[3]
+	 * HCI_COMMAND = 1, ACL_DATA = 2, SCO_DATA = 3, 0xFE = Vendor
+	 * header length: byte[2][1][0]
+	 */
+
+	skb->data[0] = (skb->len & 0x0000ff);
+	skb->data[1] = (skb->len & 0x00ff00) >> 8;
+	skb->data[2] = (skb->len & 0xff0000) >> 16;
+	skb->data[3] = hci_skb_pkt_type(skb);
+
+	if (priv->hw_host_to_card)
+		ret = priv->hw_host_to_card(priv, skb->data, skb->len);
+
+	return ret;
+}
+
+static void btmrvl_init_adapter(struct btmrvl_private *priv)
+{
+	int buf_size;
+
+	skb_queue_head_init(&priv->adapter->tx_queue);
+
+	priv->adapter->ps_state = PS_AWAKE;
+
+	buf_size = ALIGN_SZ(SDIO_BLOCK_SIZE, BTSDIO_DMA_ALIGN);
+	priv->adapter->hw_regs_buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!priv->adapter->hw_regs_buf) {
+		priv->adapter->hw_regs = NULL;
+		BT_ERR("Unable to allocate buffer for hw_regs.");
+	} else {
+		priv->adapter->hw_regs =
+			(u8 *)ALIGN_ADDR(priv->adapter->hw_regs_buf,
+					 BTSDIO_DMA_ALIGN);
+		BT_DBG("hw_regs_buf=%p hw_regs=%p",
+		       priv->adapter->hw_regs_buf, priv->adapter->hw_regs);
+	}
+
+	init_waitqueue_head(&priv->adapter->cmd_wait_q);
+	init_waitqueue_head(&priv->adapter->event_hs_wait_q);
+}
+
+static void btmrvl_free_adapter(struct btmrvl_private *priv)
+{
+	skb_queue_purge(&priv->adapter->tx_queue);
+
+	kfree(priv->adapter->hw_regs_buf);
+	kfree(priv->adapter);
+
+	priv->adapter = NULL;
+}
+
+static int btmrvl_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btmrvl_private *priv = hci_get_drvdata(hdev);
+
+	BT_DBG("type=%d, len=%d", hci_skb_pkt_type(skb), skb->len);
+
+	if (priv->adapter->is_suspending || priv->adapter->is_suspended) {
+		BT_ERR("%s: Device is suspending or suspended", __func__);
+		return -EBUSY;
+	}
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+	}
+
+	skb_queue_tail(&priv->adapter->tx_queue, skb);
+
+	if (!priv->adapter->is_suspended)
+		wake_up_interruptible(&priv->main_thread.wait_q);
+
+	return 0;
+}
+
+static int btmrvl_flush(struct hci_dev *hdev)
+{
+	struct btmrvl_private *priv = hci_get_drvdata(hdev);
+
+	skb_queue_purge(&priv->adapter->tx_queue);
+
+	return 0;
+}
+
+static int btmrvl_close(struct hci_dev *hdev)
+{
+	struct btmrvl_private *priv = hci_get_drvdata(hdev);
+
+	skb_queue_purge(&priv->adapter->tx_queue);
+
+	return 0;
+}
+
+static int btmrvl_open(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int btmrvl_download_cal_data(struct btmrvl_private *priv,
+				    u8 *data, int len)
+{
+	int ret;
+
+	data[0] = 0x00;
+	data[1] = 0x00;
+	data[2] = 0x00;
+	data[3] = len;
+
+	print_hex_dump_bytes("Calibration data: ",
+			     DUMP_PREFIX_OFFSET, data, BT_CAL_HDR_LEN + len);
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_LOAD_CONFIG_DATA, data,
+				   BT_CAL_HDR_LEN + len);
+	if (ret)
+		BT_ERR("Failed to download calibration data");
+
+	return 0;
+}
+
+static int btmrvl_check_device_tree(struct btmrvl_private *priv)
+{
+	struct device_node *dt_node;
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+	u8 cal_data[BT_CAL_HDR_LEN + BT_CAL_DATA_SIZE];
+	int ret = 0;
+	u16 gpio, gap;
+
+	if (card->plt_of_node) {
+		dt_node = card->plt_of_node;
+		ret = of_property_read_u16(dt_node, "marvell,wakeup-pin",
+					   &gpio);
+		if (ret)
+			gpio = (priv->btmrvl_dev.gpio_gap & 0xff00) >> 8;
+
+		ret = of_property_read_u16(dt_node, "marvell,wakeup-gap-ms",
+					   &gap);
+		if (ret)
+			gap = (u8)(priv->btmrvl_dev.gpio_gap & 0x00ff);
+
+		priv->btmrvl_dev.gpio_gap = (gpio << 8) + gap;
+
+		ret = of_property_read_u8_array(dt_node, "marvell,cal-data",
+						cal_data + BT_CAL_HDR_LEN,
+						BT_CAL_DATA_SIZE);
+		if (ret)
+			return ret;
+
+		BT_DBG("Use cal data from device tree");
+		ret = btmrvl_download_cal_data(priv, cal_data,
+					       BT_CAL_DATA_SIZE);
+		if (ret)
+			BT_ERR("Fail to download calibrate data");
+	}
+
+	return ret;
+}
+
+static int btmrvl_setup(struct hci_dev *hdev)
+{
+	struct btmrvl_private *priv = hci_get_drvdata(hdev);
+	int ret;
+
+	ret = btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
+	if (ret)
+		return ret;
+
+	priv->btmrvl_dev.gpio_gap = 0xfffe;
+
+	btmrvl_check_device_tree(priv);
+
+	btmrvl_enable_sco_routing_to_host(priv);
+
+	btmrvl_pscan_window_reporting(priv, 0x01);
+
+	priv->btmrvl_dev.psmode = 1;
+	btmrvl_enable_ps(priv);
+
+	btmrvl_send_hscfg_cmd(priv);
+
+	return 0;
+}
+
+static int btmrvl_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	long ret;
+	u8 buf[8];
+
+	buf[0] = MRVL_VENDOR_PKT;
+	buf[1] = sizeof(bdaddr_t);
+	memcpy(buf + 2, bdaddr, sizeof(bdaddr_t));
+
+	skb = __hci_cmd_sync(hdev, BT_CMD_SET_BDADDR, sizeof(buf), buf,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		BT_ERR("%s: changing btmrvl device address failed (%ld)",
+		       hdev->name, ret);
+		return ret;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static bool btmrvl_wakeup(struct hci_dev *hdev)
+{
+	struct btmrvl_private *priv = hci_get_drvdata(hdev);
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+
+	return device_may_wakeup(&card->func->dev);
+}
+
+/*
+ * This function handles the event generated by firmware, rx data
+ * received from firmware, and tx data sent from kernel.
+ */
+static int btmrvl_service_main_thread(void *data)
+{
+	struct btmrvl_thread *thread = data;
+	struct btmrvl_private *priv = thread->priv;
+	struct btmrvl_adapter *adapter = priv->adapter;
+	wait_queue_entry_t wait;
+	struct sk_buff *skb;
+	ulong flags;
+
+	init_waitqueue_entry(&wait, current);
+
+	for (;;) {
+		add_wait_queue(&thread->wait_q, &wait);
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (kthread_should_stop() || priv->surprise_removed) {
+			BT_DBG("main_thread: break from main thread");
+			break;
+		}
+
+		if (adapter->wakeup_tries ||
+				((!adapter->int_count) &&
+				(!priv->btmrvl_dev.tx_dnld_rdy ||
+				skb_queue_empty(&adapter->tx_queue)))) {
+			BT_DBG("main_thread is sleeping...");
+			schedule();
+		}
+
+		set_current_state(TASK_RUNNING);
+
+		remove_wait_queue(&thread->wait_q, &wait);
+
+		BT_DBG("main_thread woke up");
+
+		if (kthread_should_stop() || priv->surprise_removed) {
+			BT_DBG("main_thread: break from main thread");
+			break;
+		}
+
+		spin_lock_irqsave(&priv->driver_lock, flags);
+		if (adapter->int_count) {
+			adapter->int_count = 0;
+			spin_unlock_irqrestore(&priv->driver_lock, flags);
+			priv->hw_process_int_status(priv);
+		} else if (adapter->ps_state == PS_SLEEP &&
+					!skb_queue_empty(&adapter->tx_queue)) {
+			spin_unlock_irqrestore(&priv->driver_lock, flags);
+			adapter->wakeup_tries++;
+			priv->hw_wakeup_firmware(priv);
+			continue;
+		} else {
+			spin_unlock_irqrestore(&priv->driver_lock, flags);
+		}
+
+		if (adapter->ps_state == PS_SLEEP)
+			continue;
+
+		if (!priv->btmrvl_dev.tx_dnld_rdy ||
+		    priv->adapter->is_suspended)
+			continue;
+
+		skb = skb_dequeue(&adapter->tx_queue);
+		if (skb) {
+			if (btmrvl_tx_pkt(priv, skb))
+				priv->btmrvl_dev.hcidev->stat.err_tx++;
+			else
+				priv->btmrvl_dev.hcidev->stat.byte_tx += skb->len;
+
+			kfree_skb(skb);
+		}
+	}
+
+	return 0;
+}
+
+int btmrvl_register_hdev(struct btmrvl_private *priv)
+{
+	struct hci_dev *hdev = NULL;
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+	int ret;
+
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Can not allocate HCI device");
+		goto err_hdev;
+	}
+
+	priv->btmrvl_dev.hcidev = hdev;
+	hci_set_drvdata(hdev, priv);
+
+	hdev->bus   = HCI_SDIO;
+	hdev->open  = btmrvl_open;
+	hdev->close = btmrvl_close;
+	hdev->flush = btmrvl_flush;
+	hdev->send  = btmrvl_send_frame;
+	hdev->setup = btmrvl_setup;
+	hdev->set_bdaddr = btmrvl_set_bdaddr;
+	hdev->wakeup = btmrvl_wakeup;
+	SET_HCIDEV_DEV(hdev, &card->func->dev);
+
+	hdev->dev_type = priv->btmrvl_dev.dev_type;
+
+	ret = hci_register_dev(hdev);
+	if (ret < 0) {
+		BT_ERR("Can not register HCI device");
+		goto err_hci_register_dev;
+	}
+
+#ifdef CONFIG_DEBUG_FS
+	btmrvl_debugfs_init(hdev);
+#endif
+
+	return 0;
+
+err_hci_register_dev:
+	hci_free_dev(hdev);
+
+err_hdev:
+	/* Stop the thread servicing the interrupts */
+	kthread_stop(priv->main_thread.task);
+
+	btmrvl_free_adapter(priv);
+	kfree(priv);
+
+	return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(btmrvl_register_hdev);
+
+struct btmrvl_private *btmrvl_add_card(void *card)
+{
+	struct btmrvl_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		BT_ERR("Can not allocate priv");
+		goto err_priv;
+	}
+
+	priv->adapter = kzalloc(sizeof(*priv->adapter), GFP_KERNEL);
+	if (!priv->adapter) {
+		BT_ERR("Allocate buffer for btmrvl_adapter failed!");
+		goto err_adapter;
+	}
+
+	btmrvl_init_adapter(priv);
+
+	BT_DBG("Starting kthread...");
+	priv->main_thread.priv = priv;
+	spin_lock_init(&priv->driver_lock);
+
+	init_waitqueue_head(&priv->main_thread.wait_q);
+	priv->main_thread.task = kthread_run(btmrvl_service_main_thread,
+				&priv->main_thread, "btmrvl_main_service");
+	if (IS_ERR(priv->main_thread.task))
+		goto err_thread;
+
+	priv->btmrvl_dev.card = card;
+	priv->btmrvl_dev.tx_dnld_rdy = true;
+
+	return priv;
+
+err_thread:
+	btmrvl_free_adapter(priv);
+
+err_adapter:
+	kfree(priv);
+
+err_priv:
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(btmrvl_add_card);
+
+int btmrvl_remove_card(struct btmrvl_private *priv)
+{
+	struct hci_dev *hdev;
+
+	hdev = priv->btmrvl_dev.hcidev;
+
+	wake_up_interruptible(&priv->adapter->cmd_wait_q);
+	wake_up_interruptible(&priv->adapter->event_hs_wait_q);
+
+	kthread_stop(priv->main_thread.task);
+
+#ifdef CONFIG_DEBUG_FS
+	btmrvl_debugfs_remove(hdev);
+#endif
+
+	hci_unregister_dev(hdev);
+
+	hci_free_dev(hdev);
+
+	priv->btmrvl_dev.hcidev = NULL;
+
+	btmrvl_free_adapter(priv);
+
+	kfree(priv);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btmrvl_remove_card);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell Bluetooth driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
new file mode 100644
index 000000000..ba057ebfd
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -0,0 +1,1781 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Marvell BT-over-SDIO driver: SDIO interface related functions.
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ **/
+
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/module.h>
+#include <linux/devcoredump.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btmrvl_drv.h"
+#include "btmrvl_sdio.h"
+
+#define VERSION "1.0"
+
+static struct memory_type_mapping mem_type_mapping_tbl[] = {
+	{"ITCM", NULL, 0, 0xF0},
+	{"DTCM", NULL, 0, 0xF1},
+	{"SQRAM", NULL, 0, 0xF2},
+	{"APU", NULL, 0, 0xF3},
+	{"CIU", NULL, 0, 0xF4},
+	{"ICU", NULL, 0, 0xF5},
+	{"MAC", NULL, 0, 0xF6},
+	{"EXT7", NULL, 0, 0xF7},
+	{"EXT8", NULL, 0, 0xF8},
+	{"EXT9", NULL, 0, 0xF9},
+	{"EXT10", NULL, 0, 0xFA},
+	{"EXT11", NULL, 0, 0xFB},
+	{"EXT12", NULL, 0, 0xFC},
+	{"EXT13", NULL, 0, 0xFD},
+	{"EXTLAST", NULL, 0, 0xFE},
+};
+
+static const struct of_device_id btmrvl_sdio_of_match_table[] = {
+	{ .compatible = "marvell,sd8897-bt" },
+	{ .compatible = "marvell,sd8997-bt" },
+	{ }
+};
+
+static irqreturn_t btmrvl_wake_irq_bt(int irq, void *priv)
+{
+	struct btmrvl_sdio_card *card = priv;
+	struct device *dev = &card->func->dev;
+	struct btmrvl_plt_wake_cfg *cfg = card->plt_wake_cfg;
+
+	dev_info(dev, "wake by bt\n");
+	cfg->wake_by_bt = true;
+	disable_irq_nosync(irq);
+
+	pm_wakeup_event(dev, 0);
+	pm_system_wakeup();
+
+	return IRQ_HANDLED;
+}
+
+/* This function parses device tree node using mmc subnode devicetree API.
+ * The device node is saved in card->plt_of_node.
+ * If the device tree node exists and includes interrupts attributes, this
+ * function will request platform specific wakeup interrupt.
+ */
+static int btmrvl_sdio_probe_of(struct device *dev,
+				struct btmrvl_sdio_card *card)
+{
+	struct btmrvl_plt_wake_cfg *cfg;
+	int ret;
+
+	if (!dev->of_node ||
+	    !of_match_node(btmrvl_sdio_of_match_table, dev->of_node)) {
+		dev_info(dev, "sdio device tree data not available\n");
+		return -1;
+	}
+
+	card->plt_of_node = dev->of_node;
+
+	card->plt_wake_cfg = devm_kzalloc(dev, sizeof(*card->plt_wake_cfg),
+					  GFP_KERNEL);
+	cfg = card->plt_wake_cfg;
+	if (cfg && card->plt_of_node) {
+		cfg->irq_bt = irq_of_parse_and_map(card->plt_of_node, 0);
+		if (!cfg->irq_bt) {
+			dev_err(dev, "fail to parse irq_bt from device tree\n");
+			cfg->irq_bt = -1;
+		} else {
+			ret = devm_request_irq(dev, cfg->irq_bt,
+					       btmrvl_wake_irq_bt,
+					       0, "bt_wake", card);
+			if (ret) {
+				dev_err(dev,
+					"Failed to request irq_bt %d (%d)\n",
+					cfg->irq_bt, ret);
+			}
+
+			/* Configure wakeup (enabled by default) */
+			device_init_wakeup(dev, true);
+			disable_irq(cfg->irq_bt);
+		}
+	}
+
+	return 0;
+}
+
+/* The btmrvl_sdio_remove() callback function is called
+ * when user removes this module from kernel space or ejects
+ * the card from the slot. The driver handles these 2 cases
+ * differently.
+ * If the user is removing the module, a MODULE_SHUTDOWN_REQ
+ * command is sent to firmware and interrupt will be disabled.
+ * If the card is removed, there is no need to send command
+ * or disable interrupt.
+ *
+ * The variable 'user_rmmod' is used to distinguish these two
+ * scenarios. This flag is initialized as FALSE in case the card
+ * is removed, and will be set to TRUE for module removal when
+ * module_exit function is called.
+ */
+static u8 user_rmmod;
+static u8 sdio_ireg;
+
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8688 = {
+	.cfg = 0x03,
+	.host_int_mask = 0x04,
+	.host_intstatus = 0x05,
+	.card_status = 0x20,
+	.sq_read_base_addr_a0 = 0x10,
+	.sq_read_base_addr_a1 = 0x11,
+	.card_fw_status0 = 0x40,
+	.card_fw_status1 = 0x41,
+	.card_rx_len = 0x42,
+	.card_rx_unit = 0x43,
+	.io_port_0 = 0x00,
+	.io_port_1 = 0x01,
+	.io_port_2 = 0x02,
+	.int_read_to_clear = false,
+};
+static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
+	.cfg = 0x00,
+	.host_int_mask = 0x02,
+	.host_intstatus = 0x03,
+	.card_status = 0x30,
+	.sq_read_base_addr_a0 = 0x40,
+	.sq_read_base_addr_a1 = 0x41,
+	.card_revision = 0x5c,
+	.card_fw_status0 = 0x60,
+	.card_fw_status1 = 0x61,
+	.card_rx_len = 0x62,
+	.card_rx_unit = 0x63,
+	.io_port_0 = 0x78,
+	.io_port_1 = 0x79,
+	.io_port_2 = 0x7a,
+	.int_read_to_clear = false,
+};
+
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8887 = {
+	.cfg = 0x00,
+	.host_int_mask = 0x08,
+	.host_intstatus = 0x0C,
+	.card_status = 0x5C,
+	.sq_read_base_addr_a0 = 0x6C,
+	.sq_read_base_addr_a1 = 0x6D,
+	.card_revision = 0xC8,
+	.card_fw_status0 = 0x88,
+	.card_fw_status1 = 0x89,
+	.card_rx_len = 0x8A,
+	.card_rx_unit = 0x8B,
+	.io_port_0 = 0xE4,
+	.io_port_1 = 0xE5,
+	.io_port_2 = 0xE6,
+	.int_read_to_clear = true,
+	.host_int_rsr = 0x04,
+	.card_misc_cfg = 0xD8,
+};
+
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8897 = {
+	.cfg = 0x00,
+	.host_int_mask = 0x02,
+	.host_intstatus = 0x03,
+	.card_status = 0x50,
+	.sq_read_base_addr_a0 = 0x60,
+	.sq_read_base_addr_a1 = 0x61,
+	.card_revision = 0xbc,
+	.card_fw_status0 = 0xc0,
+	.card_fw_status1 = 0xc1,
+	.card_rx_len = 0xc2,
+	.card_rx_unit = 0xc3,
+	.io_port_0 = 0xd8,
+	.io_port_1 = 0xd9,
+	.io_port_2 = 0xda,
+	.int_read_to_clear = true,
+	.host_int_rsr = 0x01,
+	.card_misc_cfg = 0xcc,
+	.fw_dump_ctrl = 0xe2,
+	.fw_dump_start = 0xe3,
+	.fw_dump_end = 0xea,
+};
+
+static const struct btmrvl_sdio_card_reg btmrvl_reg_89xx = {
+	.cfg = 0x00,
+	.host_int_mask = 0x08,
+	.host_intstatus = 0x0c,
+	.card_status = 0x5c,
+	.sq_read_base_addr_a0 = 0xf8,
+	.sq_read_base_addr_a1 = 0xf9,
+	.card_revision = 0xc8,
+	.card_fw_status0 = 0xe8,
+	.card_fw_status1 = 0xe9,
+	.card_rx_len = 0xea,
+	.card_rx_unit = 0xeb,
+	.io_port_0 = 0xe4,
+	.io_port_1 = 0xe5,
+	.io_port_2 = 0xe6,
+	.int_read_to_clear = true,
+	.host_int_rsr = 0x04,
+	.card_misc_cfg = 0xd8,
+	.fw_dump_ctrl = 0xf0,
+	.fw_dump_start = 0xf1,
+	.fw_dump_end = 0xf8,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
+	.helper		= "mrvl/sd8688_helper.bin",
+	.firmware	= "mrvl/sd8688.bin",
+	.reg		= &btmrvl_reg_8688,
+	.support_pscan_win_report = false,
+	.sd_blksz_fw_dl	= 64,
+	.supports_fw_dump = false,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
+	.helper		= NULL,
+	.firmware	= "mrvl/sd8787_uapsta.bin",
+	.reg		= &btmrvl_reg_87xx,
+	.support_pscan_win_report = false,
+	.sd_blksz_fw_dl	= 256,
+	.supports_fw_dump = false,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
+	.helper		= NULL,
+	.firmware	= "mrvl/sd8797_uapsta.bin",
+	.reg		= &btmrvl_reg_87xx,
+	.support_pscan_win_report = false,
+	.sd_blksz_fw_dl	= 256,
+	.supports_fw_dump = false,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8887 = {
+	.helper		= NULL,
+	.firmware	= "mrvl/sd8887_uapsta.bin",
+	.reg		= &btmrvl_reg_8887,
+	.support_pscan_win_report = true,
+	.sd_blksz_fw_dl	= 256,
+	.supports_fw_dump = false,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
+	.helper		= NULL,
+	.firmware	= "mrvl/sd8897_uapsta.bin",
+	.reg		= &btmrvl_reg_8897,
+	.support_pscan_win_report = true,
+	.sd_blksz_fw_dl	= 256,
+	.supports_fw_dump = true,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8977 = {
+	.helper         = NULL,
+	.firmware       = "mrvl/sdsd8977_combo_v2.bin",
+	.reg            = &btmrvl_reg_89xx,
+	.support_pscan_win_report = true,
+	.sd_blksz_fw_dl = 256,
+	.supports_fw_dump = true,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8987 = {
+	.helper		= NULL,
+	.firmware	= "mrvl/sd8987_uapsta.bin",
+	.reg		= &btmrvl_reg_89xx,
+	.support_pscan_win_report = true,
+	.sd_blksz_fw_dl	= 256,
+	.supports_fw_dump = true,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = {
+	.helper         = NULL,
+	.firmware       = "mrvl/sdsd8997_combo_v4.bin",
+	.reg            = &btmrvl_reg_89xx,
+	.support_pscan_win_report = true,
+	.sd_blksz_fw_dl = 256,
+	.supports_fw_dump = true,
+};
+
+static const struct sdio_device_id btmrvl_sdio_ids[] = {
+	/* Marvell SD8688 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8688_BT),
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8688 },
+	/* Marvell SD8787 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8787_BT),
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8787 },
+	/* Marvell SD8787 Bluetooth AMP device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8787_BT_AMP),
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8787 },
+	/* Marvell SD8797 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797_BT),
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8797 },
+	/* Marvell SD8887 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8887_BT),
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8887 },
+	/* Marvell SD8897 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8897_BT),
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8897 },
+	/* Marvell SD8977 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8977_BT),
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8977 },
+	/* Marvell SD8987 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8987_BT),
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8987 },
+	/* Marvell SD8997 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8997_BT),
+			.driver_data = (unsigned long)&btmrvl_sdio_sd8997 },
+
+	{ }	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(sdio, btmrvl_sdio_ids);
+
+static int btmrvl_sdio_get_rx_unit(struct btmrvl_sdio_card *card)
+{
+	u8 reg;
+	int ret;
+
+	reg = sdio_readb(card->func, card->reg->card_rx_unit, &ret);
+	if (!ret)
+		card->rx_unit = reg;
+
+	return ret;
+}
+
+static int btmrvl_sdio_read_fw_status(struct btmrvl_sdio_card *card, u16 *dat)
+{
+	u8 fws0, fws1;
+	int ret;
+
+	*dat = 0;
+
+	fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
+	if (ret)
+		return -EIO;
+
+	fws1 = sdio_readb(card->func, card->reg->card_fw_status1, &ret);
+	if (ret)
+		return -EIO;
+
+	*dat = (((u16) fws1) << 8) | fws0;
+
+	return 0;
+}
+
+static int btmrvl_sdio_read_rx_len(struct btmrvl_sdio_card *card, u16 *dat)
+{
+	u8 reg;
+	int ret;
+
+	reg = sdio_readb(card->func, card->reg->card_rx_len, &ret);
+	if (!ret)
+		*dat = (u16) reg << card->rx_unit;
+
+	return ret;
+}
+
+static int btmrvl_sdio_enable_host_int_mask(struct btmrvl_sdio_card *card,
+								u8 mask)
+{
+	int ret;
+
+	sdio_writeb(card->func, mask, card->reg->host_int_mask, &ret);
+	if (ret) {
+		BT_ERR("Unable to enable the host interrupt!");
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int btmrvl_sdio_disable_host_int_mask(struct btmrvl_sdio_card *card,
+								u8 mask)
+{
+	u8 host_int_mask;
+	int ret;
+
+	host_int_mask = sdio_readb(card->func, card->reg->host_int_mask, &ret);
+	if (ret)
+		return -EIO;
+
+	host_int_mask &= ~mask;
+
+	sdio_writeb(card->func, host_int_mask, card->reg->host_int_mask, &ret);
+	if (ret < 0) {
+		BT_ERR("Unable to disable the host interrupt!");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int btmrvl_sdio_poll_card_status(struct btmrvl_sdio_card *card, u8 bits)
+{
+	unsigned int tries;
+	u8 status;
+	int ret;
+
+	for (tries = 0; tries < MAX_POLL_TRIES * 1000; tries++) {
+		status = sdio_readb(card->func, card->reg->card_status,	&ret);
+		if (ret)
+			goto failed;
+		if ((status & bits) == bits)
+			return ret;
+
+		udelay(1);
+	}
+
+	ret = -ETIMEDOUT;
+
+failed:
+	BT_ERR("FAILED! ret=%d", ret);
+
+	return ret;
+}
+
+static int btmrvl_sdio_verify_fw_download(struct btmrvl_sdio_card *card,
+								int pollnum)
+{
+	u16 firmwarestat;
+	int tries, ret;
+
+	 /* Wait for firmware to become ready */
+	for (tries = 0; tries < pollnum; tries++) {
+		sdio_claim_host(card->func);
+		ret = btmrvl_sdio_read_fw_status(card, &firmwarestat);
+		sdio_release_host(card->func);
+		if (ret < 0)
+			continue;
+
+		if (firmwarestat == FIRMWARE_READY)
+			return 0;
+
+		msleep(100);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int btmrvl_sdio_download_helper(struct btmrvl_sdio_card *card)
+{
+	const struct firmware *fw_helper = NULL;
+	const u8 *helper = NULL;
+	int ret;
+	void *tmphlprbuf = NULL;
+	int tmphlprbufsz, hlprblknow, helperlen;
+	u8 *helperbuf;
+	u32 tx_len;
+
+	ret = request_firmware(&fw_helper, card->helper,
+						&card->func->dev);
+	if ((ret < 0) || !fw_helper) {
+		BT_ERR("request_firmware(helper) failed, error code = %d",
+									ret);
+		ret = -ENOENT;
+		goto done;
+	}
+
+	helper = fw_helper->data;
+	helperlen = fw_helper->size;
+
+	BT_DBG("Downloading helper image (%d bytes), block size %d bytes",
+						helperlen, SDIO_BLOCK_SIZE);
+
+	tmphlprbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN);
+
+	tmphlprbuf = kzalloc(tmphlprbufsz, GFP_KERNEL);
+	if (!tmphlprbuf) {
+		BT_ERR("Unable to allocate buffer for helper."
+			" Terminating download");
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	helperbuf = (u8 *) ALIGN_ADDR(tmphlprbuf, BTSDIO_DMA_ALIGN);
+
+	/* Perform helper data transfer */
+	tx_len = (FIRMWARE_TRANSFER_NBLOCK * SDIO_BLOCK_SIZE)
+			- SDIO_HEADER_LEN;
+	hlprblknow = 0;
+
+	do {
+		ret = btmrvl_sdio_poll_card_status(card,
+					    CARD_IO_READY | DN_LD_CARD_RDY);
+		if (ret < 0) {
+			BT_ERR("Helper download poll status timeout @ %d",
+				hlprblknow);
+			goto done;
+		}
+
+		/* Check if there is more data? */
+		if (hlprblknow >= helperlen)
+			break;
+
+		if (helperlen - hlprblknow < tx_len)
+			tx_len = helperlen - hlprblknow;
+
+		/* Little-endian */
+		helperbuf[0] = ((tx_len & 0x000000ff) >> 0);
+		helperbuf[1] = ((tx_len & 0x0000ff00) >> 8);
+		helperbuf[2] = ((tx_len & 0x00ff0000) >> 16);
+		helperbuf[3] = ((tx_len & 0xff000000) >> 24);
+
+		memcpy(&helperbuf[SDIO_HEADER_LEN], &helper[hlprblknow],
+				tx_len);
+
+		/* Now send the data */
+		ret = sdio_writesb(card->func, card->ioport, helperbuf,
+				FIRMWARE_TRANSFER_NBLOCK * SDIO_BLOCK_SIZE);
+		if (ret < 0) {
+			BT_ERR("IO error during helper download @ %d",
+				hlprblknow);
+			goto done;
+		}
+
+		hlprblknow += tx_len;
+	} while (true);
+
+	BT_DBG("Transferring helper image EOF block");
+
+	memset(helperbuf, 0x0, SDIO_BLOCK_SIZE);
+
+	ret = sdio_writesb(card->func, card->ioport, helperbuf,
+							SDIO_BLOCK_SIZE);
+	if (ret < 0) {
+		BT_ERR("IO error in writing helper image EOF block");
+		goto done;
+	}
+
+	ret = 0;
+
+done:
+	kfree(tmphlprbuf);
+	release_firmware(fw_helper);
+	return ret;
+}
+
+static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
+{
+	const struct firmware *fw_firmware = NULL;
+	const u8 *firmware = NULL;
+	int firmwarelen, tmpfwbufsz, ret;
+	unsigned int tries, offset;
+	u8 base0, base1;
+	void *tmpfwbuf = NULL;
+	u8 *fwbuf;
+	u16 len, blksz_dl = card->sd_blksz_fw_dl;
+	int txlen = 0, tx_blocks = 0, count = 0;
+
+	ret = request_firmware(&fw_firmware, card->firmware,
+							&card->func->dev);
+	if ((ret < 0) || !fw_firmware) {
+		BT_ERR("request_firmware(firmware) failed, error code = %d",
+									ret);
+		ret = -ENOENT;
+		goto done;
+	}
+
+	firmware = fw_firmware->data;
+	firmwarelen = fw_firmware->size;
+
+	BT_DBG("Downloading FW image (%d bytes)", firmwarelen);
+
+	tmpfwbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN);
+	tmpfwbuf = kzalloc(tmpfwbufsz, GFP_KERNEL);
+	if (!tmpfwbuf) {
+		BT_ERR("Unable to allocate buffer for firmware."
+		       " Terminating download");
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	/* Ensure aligned firmware buffer */
+	fwbuf = (u8 *) ALIGN_ADDR(tmpfwbuf, BTSDIO_DMA_ALIGN);
+
+	/* Perform firmware data transfer */
+	offset = 0;
+	do {
+		ret = btmrvl_sdio_poll_card_status(card,
+					CARD_IO_READY | DN_LD_CARD_RDY);
+		if (ret < 0) {
+			BT_ERR("FW download with helper poll status"
+						" timeout @ %d", offset);
+			goto done;
+		}
+
+		/* Check if there is more data ? */
+		if (offset >= firmwarelen)
+			break;
+
+		for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
+			base0 = sdio_readb(card->func,
+					card->reg->sq_read_base_addr_a0, &ret);
+			if (ret) {
+				BT_ERR("BASE0 register read failed:"
+					" base0 = 0x%04X(%d)."
+					" Terminating download",
+					base0, base0);
+				ret = -EIO;
+				goto done;
+			}
+			base1 = sdio_readb(card->func,
+					card->reg->sq_read_base_addr_a1, &ret);
+			if (ret) {
+				BT_ERR("BASE1 register read failed:"
+					" base1 = 0x%04X(%d)."
+					" Terminating download",
+					base1, base1);
+				ret = -EIO;
+				goto done;
+			}
+
+			len = (((u16) base1) << 8) | base0;
+			if (len)
+				break;
+
+			udelay(10);
+		}
+
+		if (!len)
+			break;
+		else if (len > BTM_UPLD_SIZE) {
+			BT_ERR("FW download failure @%d, invalid length %d",
+								offset, len);
+			ret = -EINVAL;
+			goto done;
+		}
+
+		txlen = len;
+
+		if (len & BIT(0)) {
+			count++;
+			if (count > MAX_WRITE_IOMEM_RETRY) {
+				BT_ERR("FW download failure @%d, "
+					"over max retry count", offset);
+				ret = -EIO;
+				goto done;
+			}
+			BT_ERR("FW CRC error indicated by the helper: "
+				"len = 0x%04X, txlen = %d", len, txlen);
+			len &= ~BIT(0);
+			/* Set txlen to 0 so as to resend from same offset */
+			txlen = 0;
+		} else {
+			count = 0;
+
+			/* Last block ? */
+			if (firmwarelen - offset < txlen)
+				txlen = firmwarelen - offset;
+
+			tx_blocks = DIV_ROUND_UP(txlen, blksz_dl);
+
+			memcpy(fwbuf, &firmware[offset], txlen);
+		}
+
+		ret = sdio_writesb(card->func, card->ioport, fwbuf,
+						tx_blocks * blksz_dl);
+
+		if (ret < 0) {
+			BT_ERR("FW download, writesb(%d) failed @%d",
+							count, offset);
+			sdio_writeb(card->func, HOST_CMD53_FIN,
+						card->reg->cfg, &ret);
+			if (ret)
+				BT_ERR("writeb failed (CFG)");
+		}
+
+		offset += txlen;
+	} while (true);
+
+	BT_INFO("FW download over, size %d bytes", offset);
+
+	ret = 0;
+
+done:
+	kfree(tmpfwbuf);
+	release_firmware(fw_firmware);
+	return ret;
+}
+
+static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
+{
+	u16 buf_len = 0;
+	int ret, num_blocks, blksz;
+	struct sk_buff *skb = NULL;
+	u32 type;
+	u8 *payload;
+	struct hci_dev *hdev = priv->btmrvl_dev.hcidev;
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+
+	if (!card || !card->func) {
+		BT_ERR("card or function is NULL!");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* Read the length of data to be transferred */
+	ret = btmrvl_sdio_read_rx_len(card, &buf_len);
+	if (ret < 0) {
+		BT_ERR("read rx_len failed");
+		ret = -EIO;
+		goto exit;
+	}
+
+	blksz = SDIO_BLOCK_SIZE;
+	num_blocks = DIV_ROUND_UP(buf_len, blksz);
+
+	if (buf_len <= SDIO_HEADER_LEN
+	    || (num_blocks * blksz) > ALLOC_BUF_SIZE) {
+		BT_ERR("invalid packet length: %d", buf_len);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* Allocate buffer */
+	skb = bt_skb_alloc(num_blocks * blksz + BTSDIO_DMA_ALIGN, GFP_KERNEL);
+	if (!skb) {
+		BT_ERR("No free skb");
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	if ((unsigned long) skb->data & (BTSDIO_DMA_ALIGN - 1)) {
+		skb_put(skb, (unsigned long) skb->data &
+					(BTSDIO_DMA_ALIGN - 1));
+		skb_pull(skb, (unsigned long) skb->data &
+					(BTSDIO_DMA_ALIGN - 1));
+	}
+
+	payload = skb->data;
+
+	ret = sdio_readsb(card->func, payload, card->ioport,
+			  num_blocks * blksz);
+	if (ret < 0) {
+		BT_ERR("readsb failed: %d", ret);
+		ret = -EIO;
+		goto exit;
+	}
+
+	/* This is SDIO specific header length: byte[2][1][0], type: byte[3]
+	 * (HCI_COMMAND = 1, ACL_DATA = 2, SCO_DATA = 3, 0xFE = Vendor)
+	 */
+
+	buf_len = payload[0];
+	buf_len |= payload[1] << 8;
+	buf_len |= payload[2] << 16;
+
+	if (buf_len > blksz * num_blocks) {
+		BT_ERR("Skip incorrect packet: hdrlen %d buffer %d",
+		       buf_len, blksz * num_blocks);
+		ret = -EIO;
+		goto exit;
+	}
+
+	type = payload[3];
+
+	switch (type) {
+	case HCI_ACLDATA_PKT:
+	case HCI_SCODATA_PKT:
+	case HCI_EVENT_PKT:
+		hci_skb_pkt_type(skb) = type;
+		skb_put(skb, buf_len);
+		skb_pull(skb, SDIO_HEADER_LEN);
+
+		if (type == HCI_EVENT_PKT) {
+			if (btmrvl_check_evtpkt(priv, skb))
+				hci_recv_frame(hdev, skb);
+		} else {
+			hci_recv_frame(hdev, skb);
+		}
+
+		hdev->stat.byte_rx += buf_len;
+		break;
+
+	case MRVL_VENDOR_PKT:
+		hci_skb_pkt_type(skb) = HCI_VENDOR_PKT;
+		skb_put(skb, buf_len);
+		skb_pull(skb, SDIO_HEADER_LEN);
+
+		if (btmrvl_process_event(priv, skb))
+			hci_recv_frame(hdev, skb);
+
+		hdev->stat.byte_rx += buf_len;
+		break;
+
+	default:
+		BT_ERR("Unknown packet type:%d", type);
+		BT_ERR("hex: %*ph", blksz * num_blocks, payload);
+
+		kfree_skb(skb);
+		skb = NULL;
+		break;
+	}
+
+exit:
+	if (ret) {
+		hdev->stat.err_rx++;
+		kfree_skb(skb);
+	}
+
+	return ret;
+}
+
+static int btmrvl_sdio_process_int_status(struct btmrvl_private *priv)
+{
+	ulong flags;
+	u8 ireg;
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+
+	spin_lock_irqsave(&priv->driver_lock, flags);
+	ireg = sdio_ireg;
+	sdio_ireg = 0;
+	spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+	sdio_claim_host(card->func);
+	if (ireg & DN_LD_HOST_INT_STATUS) {
+		if (priv->btmrvl_dev.tx_dnld_rdy)
+			BT_DBG("tx_done already received: "
+				" int_status=0x%x", ireg);
+		else
+			priv->btmrvl_dev.tx_dnld_rdy = true;
+	}
+
+	if (ireg & UP_LD_HOST_INT_STATUS)
+		btmrvl_sdio_card_to_host(priv);
+
+	sdio_release_host(card->func);
+
+	return 0;
+}
+
+static int btmrvl_sdio_read_to_clear(struct btmrvl_sdio_card *card, u8 *ireg)
+{
+	struct btmrvl_adapter *adapter = card->priv->adapter;
+	int ret;
+
+	ret = sdio_readsb(card->func, adapter->hw_regs, 0, SDIO_BLOCK_SIZE);
+	if (ret) {
+		BT_ERR("sdio_readsb: read int hw_regs failed: %d", ret);
+		return ret;
+	}
+
+	*ireg = adapter->hw_regs[card->reg->host_intstatus];
+	BT_DBG("hw_regs[%#x]=%#x", card->reg->host_intstatus, *ireg);
+
+	return 0;
+}
+
+static int btmrvl_sdio_write_to_clear(struct btmrvl_sdio_card *card, u8 *ireg)
+{
+	int ret;
+
+	*ireg = sdio_readb(card->func, card->reg->host_intstatus, &ret);
+	if (ret) {
+		BT_ERR("sdio_readb: read int status failed: %d", ret);
+		return ret;
+	}
+
+	if (*ireg) {
+		/*
+		 * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS
+		 * Clear the interrupt status register and re-enable the
+		 * interrupt.
+		 */
+		BT_DBG("int_status = 0x%x", *ireg);
+
+		sdio_writeb(card->func, ~(*ireg) & (DN_LD_HOST_INT_STATUS |
+						    UP_LD_HOST_INT_STATUS),
+			    card->reg->host_intstatus, &ret);
+		if (ret) {
+			BT_ERR("sdio_writeb: clear int status failed: %d", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static void btmrvl_sdio_interrupt(struct sdio_func *func)
+{
+	struct btmrvl_private *priv;
+	struct btmrvl_sdio_card *card;
+	ulong flags;
+	u8 ireg = 0;
+	int ret;
+
+	card = sdio_get_drvdata(func);
+	if (!card || !card->priv) {
+		BT_ERR("sbi_interrupt(%p) card or priv is NULL, card=%p",
+		       func, card);
+		return;
+	}
+
+	priv = card->priv;
+
+	if (priv->surprise_removed)
+		return;
+
+	if (card->reg->int_read_to_clear)
+		ret = btmrvl_sdio_read_to_clear(card, &ireg);
+	else
+		ret = btmrvl_sdio_write_to_clear(card, &ireg);
+
+	if (ret)
+		return;
+
+	spin_lock_irqsave(&priv->driver_lock, flags);
+	sdio_ireg |= ireg;
+	spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+	btmrvl_interrupt(priv);
+}
+
+static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
+{
+	struct sdio_func *func;
+	u8 reg;
+	int ret;
+
+	if (!card || !card->func) {
+		BT_ERR("Error: card or function is NULL!");
+		ret = -EINVAL;
+		goto failed;
+	}
+
+	func = card->func;
+
+	sdio_claim_host(func);
+
+	ret = sdio_enable_func(func);
+	if (ret) {
+		BT_ERR("sdio_enable_func() failed: ret=%d", ret);
+		ret = -EIO;
+		goto release_host;
+	}
+
+	ret = sdio_claim_irq(func, btmrvl_sdio_interrupt);
+	if (ret) {
+		BT_ERR("sdio_claim_irq failed: ret=%d", ret);
+		ret = -EIO;
+		goto disable_func;
+	}
+
+	ret = sdio_set_block_size(card->func, SDIO_BLOCK_SIZE);
+	if (ret) {
+		BT_ERR("cannot set SDIO block size");
+		ret = -EIO;
+		goto release_irq;
+	}
+
+	reg = sdio_readb(func, card->reg->io_port_0, &ret);
+	if (ret < 0) {
+		ret = -EIO;
+		goto release_irq;
+	}
+
+	card->ioport = reg;
+
+	reg = sdio_readb(func, card->reg->io_port_1, &ret);
+	if (ret < 0) {
+		ret = -EIO;
+		goto release_irq;
+	}
+
+	card->ioport |= (reg << 8);
+
+	reg = sdio_readb(func, card->reg->io_port_2, &ret);
+	if (ret < 0) {
+		ret = -EIO;
+		goto release_irq;
+	}
+
+	card->ioport |= (reg << 16);
+
+	BT_DBG("SDIO FUNC%d IO port: 0x%x", func->num, card->ioport);
+
+	if (card->reg->int_read_to_clear) {
+		reg = sdio_readb(func, card->reg->host_int_rsr, &ret);
+		if (ret < 0) {
+			ret = -EIO;
+			goto release_irq;
+		}
+		sdio_writeb(func, reg | 0x3f, card->reg->host_int_rsr, &ret);
+		if (ret < 0) {
+			ret = -EIO;
+			goto release_irq;
+		}
+
+		reg = sdio_readb(func, card->reg->card_misc_cfg, &ret);
+		if (ret < 0) {
+			ret = -EIO;
+			goto release_irq;
+		}
+		sdio_writeb(func, reg | 0x10, card->reg->card_misc_cfg, &ret);
+		if (ret < 0) {
+			ret = -EIO;
+			goto release_irq;
+		}
+	}
+
+	sdio_set_drvdata(func, card);
+
+	sdio_release_host(func);
+
+	return 0;
+
+release_irq:
+	sdio_release_irq(func);
+
+disable_func:
+	sdio_disable_func(func);
+
+release_host:
+	sdio_release_host(func);
+
+failed:
+	return ret;
+}
+
+static int btmrvl_sdio_unregister_dev(struct btmrvl_sdio_card *card)
+{
+	if (card && card->func) {
+		sdio_claim_host(card->func);
+		sdio_release_irq(card->func);
+		sdio_disable_func(card->func);
+		sdio_release_host(card->func);
+		sdio_set_drvdata(card->func, NULL);
+	}
+
+	return 0;
+}
+
+static int btmrvl_sdio_enable_host_int(struct btmrvl_sdio_card *card)
+{
+	int ret;
+
+	if (!card || !card->func)
+		return -EINVAL;
+
+	sdio_claim_host(card->func);
+
+	ret = btmrvl_sdio_enable_host_int_mask(card, HIM_ENABLE);
+
+	btmrvl_sdio_get_rx_unit(card);
+
+	sdio_release_host(card->func);
+
+	return ret;
+}
+
+static int btmrvl_sdio_disable_host_int(struct btmrvl_sdio_card *card)
+{
+	int ret;
+
+	if (!card || !card->func)
+		return -EINVAL;
+
+	sdio_claim_host(card->func);
+
+	ret = btmrvl_sdio_disable_host_int_mask(card, HIM_DISABLE);
+
+	sdio_release_host(card->func);
+
+	return ret;
+}
+
+static int btmrvl_sdio_host_to_card(struct btmrvl_private *priv,
+				u8 *payload, u16 nb)
+{
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+	int ret = 0;
+	int blksz;
+	int i = 0;
+	u8 *buf = NULL;
+	void *tmpbuf = NULL;
+	int tmpbufsz;
+
+	if (!card || !card->func) {
+		BT_ERR("card or function is NULL!");
+		return -EINVAL;
+	}
+
+	blksz = DIV_ROUND_UP(nb, SDIO_BLOCK_SIZE) * SDIO_BLOCK_SIZE;
+
+	buf = payload;
+	if ((unsigned long) payload & (BTSDIO_DMA_ALIGN - 1) ||
+	    nb < blksz) {
+		tmpbufsz = ALIGN_SZ(blksz, BTSDIO_DMA_ALIGN) +
+			   BTSDIO_DMA_ALIGN;
+		tmpbuf = kzalloc(tmpbufsz, GFP_KERNEL);
+		if (!tmpbuf)
+			return -ENOMEM;
+		buf = (u8 *) ALIGN_ADDR(tmpbuf, BTSDIO_DMA_ALIGN);
+		memcpy(buf, payload, nb);
+	}
+
+	sdio_claim_host(card->func);
+
+	do {
+		/* Transfer data to card */
+		ret = sdio_writesb(card->func, card->ioport, buf,
+				   blksz);
+		if (ret < 0) {
+			i++;
+			BT_ERR("i=%d writesb failed: %d", i, ret);
+			BT_ERR("hex: %*ph", nb, payload);
+			ret = -EIO;
+			if (i > MAX_WRITE_IOMEM_RETRY)
+				goto exit;
+		}
+	} while (ret);
+
+	priv->btmrvl_dev.tx_dnld_rdy = false;
+
+exit:
+	sdio_release_host(card->func);
+	kfree(tmpbuf);
+
+	return ret;
+}
+
+static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
+{
+	int ret;
+	u8 fws0;
+	int pollnum = MAX_POLL_TRIES;
+
+	if (!card || !card->func) {
+		BT_ERR("card or function is NULL!");
+		return -EINVAL;
+	}
+
+	if (!btmrvl_sdio_verify_fw_download(card, 1)) {
+		BT_DBG("Firmware already downloaded!");
+		return 0;
+	}
+
+	sdio_claim_host(card->func);
+
+	/* Check if other function driver is downloading the firmware */
+	fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
+	if (ret) {
+		BT_ERR("Failed to read FW downloading status!");
+		ret = -EIO;
+		goto done;
+	}
+	if (fws0) {
+		BT_DBG("BT not the winner (%#x). Skip FW downloading", fws0);
+
+		/* Give other function more time to download the firmware */
+		pollnum *= 10;
+	} else {
+		if (card->helper) {
+			ret = btmrvl_sdio_download_helper(card);
+			if (ret) {
+				BT_ERR("Failed to download helper!");
+				ret = -EIO;
+				goto done;
+			}
+		}
+
+		if (btmrvl_sdio_download_fw_w_helper(card)) {
+			BT_ERR("Failed to download firmware!");
+			ret = -EIO;
+			goto done;
+		}
+	}
+
+	/*
+	 * winner or not, with this test the FW synchronizes when the
+	 * module can continue its initialization
+	 */
+	if (btmrvl_sdio_verify_fw_download(card, pollnum)) {
+		BT_ERR("FW failed to be active in time!");
+		ret = -ETIMEDOUT;
+		goto done;
+	}
+
+	sdio_release_host(card->func);
+
+	return 0;
+
+done:
+	sdio_release_host(card->func);
+	return ret;
+}
+
+static int btmrvl_sdio_wakeup_fw(struct btmrvl_private *priv)
+{
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+	int ret = 0;
+
+	if (!card || !card->func) {
+		BT_ERR("card or function is NULL!");
+		return -EINVAL;
+	}
+
+	sdio_claim_host(card->func);
+
+	sdio_writeb(card->func, HOST_POWER_UP, card->reg->cfg, &ret);
+
+	sdio_release_host(card->func);
+
+	BT_DBG("wake up firmware");
+
+	return ret;
+}
+
+static void btmrvl_sdio_dump_regs(struct btmrvl_private *priv)
+{
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+	int ret = 0;
+	unsigned int reg, reg_start, reg_end;
+	char buf[256], *ptr;
+	u8 loop, func, data;
+	int MAX_LOOP = 2;
+
+	btmrvl_sdio_wakeup_fw(priv);
+	sdio_claim_host(card->func);
+
+	for (loop = 0; loop < MAX_LOOP; loop++) {
+		memset(buf, 0, sizeof(buf));
+		ptr = buf;
+
+		if (loop == 0) {
+			/* Read the registers of SDIO function0 */
+			func = loop;
+			reg_start = 0;
+			reg_end = 9;
+		} else {
+			func = 2;
+			reg_start = 0;
+			reg_end = 0x09;
+		}
+
+		ptr += sprintf(ptr, "SDIO Func%d (%#x-%#x): ",
+			       func, reg_start, reg_end);
+		for (reg = reg_start; reg <= reg_end; reg++) {
+			if (func == 0)
+				data = sdio_f0_readb(card->func, reg, &ret);
+			else
+				data = sdio_readb(card->func, reg, &ret);
+
+			if (!ret) {
+				ptr += sprintf(ptr, "%02x ", data);
+			} else {
+				ptr += sprintf(ptr, "ERR");
+				break;
+			}
+		}
+
+		BT_INFO("%s", buf);
+	}
+
+	sdio_release_host(card->func);
+}
+
+/* This function read/write firmware */
+static enum
+rdwr_status btmrvl_sdio_rdwr_firmware(struct btmrvl_private *priv,
+				      u8 doneflag)
+{
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+	int ret, tries;
+	u8 ctrl_data = 0;
+
+	sdio_writeb(card->func, FW_DUMP_HOST_READY, card->reg->fw_dump_ctrl,
+		    &ret);
+
+	if (ret) {
+		BT_ERR("SDIO write err");
+		return RDWR_STATUS_FAILURE;
+	}
+
+	for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
+		ctrl_data = sdio_readb(card->func, card->reg->fw_dump_ctrl,
+				       &ret);
+
+		if (ret) {
+			BT_ERR("SDIO read err");
+			return RDWR_STATUS_FAILURE;
+		}
+
+		if (ctrl_data == FW_DUMP_DONE)
+			break;
+		if (doneflag && ctrl_data == doneflag)
+			return RDWR_STATUS_DONE;
+		if (ctrl_data != FW_DUMP_HOST_READY) {
+			BT_INFO("The ctrl reg was changed, re-try again!");
+			sdio_writeb(card->func, FW_DUMP_HOST_READY,
+				    card->reg->fw_dump_ctrl, &ret);
+			if (ret) {
+				BT_ERR("SDIO write err");
+				return RDWR_STATUS_FAILURE;
+			}
+		}
+		usleep_range(100, 200);
+	}
+
+	if (ctrl_data == FW_DUMP_HOST_READY) {
+		BT_ERR("Fail to pull ctrl_data");
+		return RDWR_STATUS_FAILURE;
+	}
+
+	return RDWR_STATUS_SUCCESS;
+}
+
+/* This function dump sdio register and memory data */
+static void btmrvl_sdio_coredump(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct btmrvl_sdio_card *card;
+	struct btmrvl_private *priv;
+	int ret = 0;
+	unsigned int reg, reg_start, reg_end;
+	enum rdwr_status stat;
+	u8 *dbg_ptr, *end_ptr, *fw_dump_data, *fw_dump_ptr;
+	u8 dump_num = 0, idx, i, read_reg, doneflag = 0;
+	u32 memory_size, fw_dump_len = 0;
+	int size = 0;
+
+	card = sdio_get_drvdata(func);
+	priv = card->priv;
+
+	/* dump sdio register first */
+	btmrvl_sdio_dump_regs(priv);
+
+	if (!card->supports_fw_dump) {
+		BT_ERR("Firmware dump not supported for this card!");
+		return;
+	}
+
+	for (idx = 0; idx < ARRAY_SIZE(mem_type_mapping_tbl); idx++) {
+		struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx];
+
+		if (entry->mem_ptr) {
+			vfree(entry->mem_ptr);
+			entry->mem_ptr = NULL;
+		}
+		entry->mem_size = 0;
+	}
+
+	btmrvl_sdio_wakeup_fw(priv);
+	sdio_claim_host(card->func);
+
+	BT_INFO("== btmrvl firmware dump start ==");
+
+	stat = btmrvl_sdio_rdwr_firmware(priv, doneflag);
+	if (stat == RDWR_STATUS_FAILURE)
+		goto done;
+
+	reg = card->reg->fw_dump_start;
+	/* Read the number of the memories which will dump */
+	dump_num = sdio_readb(card->func, reg, &ret);
+
+	if (ret) {
+		BT_ERR("SDIO read memory length err");
+		goto done;
+	}
+
+	/* Read the length of every memory which will dump */
+	for (idx = 0; idx < dump_num; idx++) {
+		struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx];
+
+		stat = btmrvl_sdio_rdwr_firmware(priv, doneflag);
+		if (stat == RDWR_STATUS_FAILURE)
+			goto done;
+
+		memory_size = 0;
+		reg = card->reg->fw_dump_start;
+		for (i = 0; i < 4; i++) {
+			read_reg = sdio_readb(card->func, reg, &ret);
+			if (ret) {
+				BT_ERR("SDIO read err");
+				goto done;
+			}
+			memory_size |= (read_reg << i*8);
+			reg++;
+		}
+
+		if (memory_size == 0) {
+			BT_INFO("Firmware dump finished!");
+			sdio_writeb(card->func, FW_DUMP_READ_DONE,
+				    card->reg->fw_dump_ctrl, &ret);
+			if (ret) {
+				BT_ERR("SDIO Write MEMDUMP_FINISH ERR");
+				goto done;
+			}
+			break;
+		}
+
+		BT_INFO("%s_SIZE=0x%x", entry->mem_name, memory_size);
+		entry->mem_ptr = vzalloc(memory_size + 1);
+		entry->mem_size = memory_size;
+		if (!entry->mem_ptr) {
+			BT_ERR("Vzalloc %s failed", entry->mem_name);
+			goto done;
+		}
+
+		fw_dump_len += (strlen("========Start dump ") +
+				strlen(entry->mem_name) +
+				strlen("========\n") +
+				(memory_size + 1) +
+				strlen("\n========End dump========\n"));
+
+		dbg_ptr = entry->mem_ptr;
+		end_ptr = dbg_ptr + memory_size;
+
+		doneflag = entry->done_flag;
+		BT_INFO("Start %s output, please wait...",
+			entry->mem_name);
+
+		do {
+			stat = btmrvl_sdio_rdwr_firmware(priv, doneflag);
+			if (stat == RDWR_STATUS_FAILURE)
+				goto done;
+
+			reg_start = card->reg->fw_dump_start;
+			reg_end = card->reg->fw_dump_end;
+			for (reg = reg_start; reg <= reg_end; reg++) {
+				*dbg_ptr = sdio_readb(card->func, reg, &ret);
+				if (ret) {
+					BT_ERR("SDIO read err");
+					goto done;
+				}
+				if (dbg_ptr < end_ptr)
+					dbg_ptr++;
+				else
+					BT_ERR("Allocated buffer not enough");
+			}
+
+			if (stat == RDWR_STATUS_DONE) {
+				BT_INFO("%s done: size=0x%tx",
+					entry->mem_name,
+					dbg_ptr - entry->mem_ptr);
+				break;
+			}
+		} while (1);
+	}
+
+	BT_INFO("== btmrvl firmware dump end ==");
+
+done:
+	sdio_release_host(card->func);
+
+	if (fw_dump_len == 0)
+		return;
+
+	fw_dump_data = vzalloc(fw_dump_len + 1);
+	if (!fw_dump_data) {
+		BT_ERR("Vzalloc fw_dump_data fail!");
+		return;
+	}
+	fw_dump_ptr = fw_dump_data;
+
+	/* Dump all the memory data into single file, a userspace script will
+	 * be used to split all the memory data to multiple files
+	 */
+	BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump start");
+	for (idx = 0; idx < dump_num; idx++) {
+		struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx];
+
+		if (entry->mem_ptr) {
+			size += scnprintf(fw_dump_ptr + size,
+					  fw_dump_len + 1 - size,
+					  "========Start dump %s========\n",
+					  entry->mem_name);
+
+			memcpy(fw_dump_ptr + size, entry->mem_ptr,
+			       entry->mem_size);
+			size += entry->mem_size;
+
+			size += scnprintf(fw_dump_ptr + size,
+					  fw_dump_len + 1 - size,
+					  "\n========End dump========\n");
+
+			vfree(mem_type_mapping_tbl[idx].mem_ptr);
+			mem_type_mapping_tbl[idx].mem_ptr = NULL;
+		}
+	}
+
+	/* fw_dump_data will be free in device coredump release function
+	 * after 5 min
+	 */
+	dev_coredumpv(&card->func->dev, fw_dump_data, fw_dump_len, GFP_KERNEL);
+	BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump end");
+}
+
+static int btmrvl_sdio_probe(struct sdio_func *func,
+					const struct sdio_device_id *id)
+{
+	int ret = 0;
+	struct btmrvl_private *priv = NULL;
+	struct btmrvl_sdio_card *card = NULL;
+
+	BT_INFO("vendor=0x%x, device=0x%x, class=%d, fn=%d",
+			id->vendor, id->device, id->class, func->num);
+
+	card = devm_kzalloc(&func->dev, sizeof(*card), GFP_KERNEL);
+	if (!card)
+		return -ENOMEM;
+
+	card->func = func;
+
+	if (id->driver_data) {
+		struct btmrvl_sdio_device *data = (void *) id->driver_data;
+		card->helper = data->helper;
+		card->firmware = data->firmware;
+		card->reg = data->reg;
+		card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
+		card->support_pscan_win_report = data->support_pscan_win_report;
+		card->supports_fw_dump = data->supports_fw_dump;
+	}
+
+	if (btmrvl_sdio_register_dev(card) < 0) {
+		BT_ERR("Failed to register BT device!");
+		return -ENODEV;
+	}
+
+	/* Disable the interrupts on the card */
+	btmrvl_sdio_disable_host_int(card);
+
+	if (btmrvl_sdio_download_fw(card)) {
+		BT_ERR("Downloading firmware failed!");
+		ret = -ENODEV;
+		goto unreg_dev;
+	}
+
+	btmrvl_sdio_enable_host_int(card);
+
+	/* Device tree node parsing and platform specific configuration*/
+	btmrvl_sdio_probe_of(&func->dev, card);
+
+	priv = btmrvl_add_card(card);
+	if (!priv) {
+		BT_ERR("Initializing card failed!");
+		ret = -ENODEV;
+		goto disable_host_int;
+	}
+
+	card->priv = priv;
+
+	/* Initialize the interface specific function pointers */
+	priv->hw_host_to_card = btmrvl_sdio_host_to_card;
+	priv->hw_wakeup_firmware = btmrvl_sdio_wakeup_fw;
+	priv->hw_process_int_status = btmrvl_sdio_process_int_status;
+
+	if (btmrvl_register_hdev(priv)) {
+		BT_ERR("Register hdev failed!");
+		ret = -ENODEV;
+		goto disable_host_int;
+	}
+
+	return 0;
+
+disable_host_int:
+	btmrvl_sdio_disable_host_int(card);
+unreg_dev:
+	btmrvl_sdio_unregister_dev(card);
+	return ret;
+}
+
+static void btmrvl_sdio_remove(struct sdio_func *func)
+{
+	struct btmrvl_sdio_card *card;
+
+	if (func) {
+		card = sdio_get_drvdata(func);
+		if (card) {
+			/* Send SHUTDOWN command & disable interrupt
+			 * if user removes the module.
+			 */
+			if (user_rmmod) {
+				btmrvl_send_module_cfg_cmd(card->priv,
+							MODULE_SHUTDOWN_REQ);
+				btmrvl_sdio_disable_host_int(card);
+			}
+
+			BT_DBG("unregister dev");
+			card->priv->surprise_removed = true;
+			btmrvl_sdio_unregister_dev(card);
+			btmrvl_remove_card(card->priv);
+		}
+	}
+}
+
+static int btmrvl_sdio_suspend(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct btmrvl_sdio_card *card;
+	struct btmrvl_private *priv;
+	mmc_pm_flag_t pm_flags;
+	struct hci_dev *hcidev;
+
+	if (func) {
+		pm_flags = sdio_get_host_pm_caps(func);
+		BT_DBG("%s: suspend: PM flags = 0x%x", sdio_func_id(func),
+		       pm_flags);
+		if (!(pm_flags & MMC_PM_KEEP_POWER)) {
+			BT_ERR("%s: cannot remain alive while suspended",
+			       sdio_func_id(func));
+			return -ENOSYS;
+		}
+		card = sdio_get_drvdata(func);
+		if (!card || !card->priv) {
+			BT_ERR("card or priv structure is not valid");
+			return 0;
+		}
+	} else {
+		BT_ERR("sdio_func is not specified");
+		return 0;
+	}
+
+	/* Enable platform specific wakeup interrupt */
+	if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0 &&
+	    device_may_wakeup(dev)) {
+		card->plt_wake_cfg->wake_by_bt = false;
+		enable_irq(card->plt_wake_cfg->irq_bt);
+		enable_irq_wake(card->plt_wake_cfg->irq_bt);
+	}
+
+	priv = card->priv;
+	priv->adapter->is_suspending = true;
+	hcidev = priv->btmrvl_dev.hcidev;
+	BT_DBG("%s: SDIO suspend", hcidev->name);
+	hci_suspend_dev(hcidev);
+
+	if (priv->adapter->hs_state != HS_ACTIVATED) {
+		if (btmrvl_enable_hs(priv)) {
+			BT_ERR("HS not activated, suspend failed!");
+			/* Disable platform specific wakeup interrupt */
+			if (card->plt_wake_cfg &&
+			    card->plt_wake_cfg->irq_bt >= 0 &&
+			    device_may_wakeup(dev)) {
+				disable_irq_wake(card->plt_wake_cfg->irq_bt);
+				disable_irq(card->plt_wake_cfg->irq_bt);
+			}
+
+			priv->adapter->is_suspending = false;
+			return -EBUSY;
+		}
+	}
+
+	priv->adapter->is_suspending = false;
+	priv->adapter->is_suspended = true;
+
+	/* We will keep the power when hs enabled successfully */
+	if (priv->adapter->hs_state == HS_ACTIVATED) {
+		BT_DBG("suspend with MMC_PM_KEEP_POWER");
+		return sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+	}
+
+	BT_DBG("suspend without MMC_PM_KEEP_POWER");
+	return 0;
+}
+
+static int btmrvl_sdio_resume(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct btmrvl_sdio_card *card;
+	struct btmrvl_private *priv;
+	mmc_pm_flag_t pm_flags;
+	struct hci_dev *hcidev;
+
+	if (func) {
+		pm_flags = sdio_get_host_pm_caps(func);
+		BT_DBG("%s: resume: PM flags = 0x%x", sdio_func_id(func),
+		       pm_flags);
+		card = sdio_get_drvdata(func);
+		if (!card || !card->priv) {
+			BT_ERR("card or priv structure is not valid");
+			return 0;
+		}
+	} else {
+		BT_ERR("sdio_func is not specified");
+		return 0;
+	}
+	priv = card->priv;
+
+	if (!priv->adapter->is_suspended) {
+		BT_DBG("device already resumed");
+		return 0;
+	}
+
+	priv->hw_wakeup_firmware(priv);
+	priv->adapter->hs_state = HS_DEACTIVATED;
+	hcidev = priv->btmrvl_dev.hcidev;
+	BT_DBG("%s: HS DEACTIVATED in resume!", hcidev->name);
+	priv->adapter->is_suspended = false;
+	BT_DBG("%s: SDIO resume", hcidev->name);
+	hci_resume_dev(hcidev);
+
+	/* Disable platform specific wakeup interrupt */
+	if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0 &&
+	    device_may_wakeup(dev)) {
+		disable_irq_wake(card->plt_wake_cfg->irq_bt);
+		disable_irq(card->plt_wake_cfg->irq_bt);
+		if (card->plt_wake_cfg->wake_by_bt)
+			/* Undo our disable, since interrupt handler already
+			 * did this.
+			 */
+			enable_irq(card->plt_wake_cfg->irq_bt);
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops btmrvl_sdio_pm_ops = {
+	.suspend	= btmrvl_sdio_suspend,
+	.resume		= btmrvl_sdio_resume,
+};
+
+static struct sdio_driver bt_mrvl_sdio = {
+	.name		= "btmrvl_sdio",
+	.id_table	= btmrvl_sdio_ids,
+	.probe		= btmrvl_sdio_probe,
+	.remove		= btmrvl_sdio_remove,
+	.drv = {
+		.owner = THIS_MODULE,
+		.coredump = btmrvl_sdio_coredump,
+		.pm = &btmrvl_sdio_pm_ops,
+	}
+};
+
+static int __init btmrvl_sdio_init_module(void)
+{
+	if (sdio_register_driver(&bt_mrvl_sdio) != 0) {
+		BT_ERR("SDIO Driver Registration Failed");
+		return -ENODEV;
+	}
+
+	/* Clear the flag in case user removes the card. */
+	user_rmmod = 0;
+
+	return 0;
+}
+
+static void __exit btmrvl_sdio_exit_module(void)
+{
+	/* Set the flag as user is removing this module. */
+	user_rmmod = 1;
+
+	sdio_unregister_driver(&bt_mrvl_sdio);
+}
+
+module_init(btmrvl_sdio_init_module);
+module_exit(btmrvl_sdio_exit_module);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell BT-over-SDIO driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL v2");
+MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
+MODULE_FIRMWARE("mrvl/sd8688.bin");
+MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8887_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sdsd8977_combo_v2.bin");
+MODULE_FIRMWARE("mrvl/sd8987_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sdsd8997_combo_v4.bin");
diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
new file mode 100644
index 000000000..72dd3b7d8
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/**
+ * Marvell BT-over-SDIO driver: SDIO interface related definitions
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ **/
+
+#define SDIO_HEADER_LEN			4
+
+/* SD block size can not bigger than 64 due to buf size limit in firmware */
+/* define SD block size for data Tx/Rx */
+#define SDIO_BLOCK_SIZE			64
+
+/* Number of blocks for firmware transfer */
+#define FIRMWARE_TRANSFER_NBLOCK	2
+
+/* This is for firmware specific length */
+#define FW_EXTRA_LEN			36
+
+#define MRVDRV_SIZE_OF_CMD_BUFFER       (2 * 1024)
+
+#define MRVDRV_BT_RX_PACKET_BUFFER_SIZE \
+	(HCI_MAX_FRAME_SIZE + FW_EXTRA_LEN)
+
+#define ALLOC_BUF_SIZE	(((max_t (int, MRVDRV_BT_RX_PACKET_BUFFER_SIZE, \
+			MRVDRV_SIZE_OF_CMD_BUFFER) + SDIO_HEADER_LEN \
+			+ SDIO_BLOCK_SIZE - 1) / SDIO_BLOCK_SIZE) \
+			* SDIO_BLOCK_SIZE)
+
+/* The number of times to try when polling for status */
+#define MAX_POLL_TRIES			100
+
+/* Max retry number of CMD53 write */
+#define MAX_WRITE_IOMEM_RETRY		2
+
+/* register bitmasks */
+#define HOST_POWER_UP				BIT(1)
+#define HOST_CMD53_FIN				BIT(2)
+
+#define HIM_DISABLE				0xff
+#define HIM_ENABLE				(BIT(0) | BIT(1))
+
+#define UP_LD_HOST_INT_STATUS			BIT(0)
+#define DN_LD_HOST_INT_STATUS			BIT(1)
+
+#define DN_LD_CARD_RDY				BIT(0)
+#define CARD_IO_READY				BIT(3)
+
+#define FIRMWARE_READY				0xfedc
+
+struct btmrvl_plt_wake_cfg {
+	int irq_bt;
+	bool wake_by_bt;
+};
+
+struct btmrvl_sdio_card_reg {
+	u8 cfg;
+	u8 host_int_mask;
+	u8 host_intstatus;
+	u8 card_status;
+	u8 sq_read_base_addr_a0;
+	u8 sq_read_base_addr_a1;
+	u8 card_revision;
+	u8 card_fw_status0;
+	u8 card_fw_status1;
+	u8 card_rx_len;
+	u8 card_rx_unit;
+	u8 io_port_0;
+	u8 io_port_1;
+	u8 io_port_2;
+	bool int_read_to_clear;
+	u8 host_int_rsr;
+	u8 card_misc_cfg;
+	u8 fw_dump_ctrl;
+	u8 fw_dump_start;
+	u8 fw_dump_end;
+};
+
+struct btmrvl_sdio_card {
+	struct sdio_func *func;
+	u32 ioport;
+	const char *helper;
+	const char *firmware;
+	const struct btmrvl_sdio_card_reg *reg;
+	bool support_pscan_win_report;
+	bool supports_fw_dump;
+	u16 sd_blksz_fw_dl;
+	u8 rx_unit;
+	struct btmrvl_private *priv;
+	struct device_node *plt_of_node;
+	struct btmrvl_plt_wake_cfg *plt_wake_cfg;
+};
+
+struct btmrvl_sdio_device {
+	const char *helper;
+	const char *firmware;
+	const struct btmrvl_sdio_card_reg *reg;
+	const bool support_pscan_win_report;
+	u16 sd_blksz_fw_dl;
+	bool supports_fw_dump;
+};
+
+
+/* Platform specific DMA alignment */
+#define BTSDIO_DMA_ALIGN		8
+
+/* Macros for Data Alignment : size */
+#define ALIGN_SZ(p, a)	\
+	(((p) + ((a) - 1)) & ~((a) - 1))
+
+/* Macros for Data Alignment : address */
+#define ALIGN_ADDR(p, a)	\
+	((((unsigned long)(p)) + (((unsigned long)(a)) - 1)) & \
+					~(((unsigned long)(a)) - 1))
diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
new file mode 100644
index 000000000..809762d64
--- /dev/null
+++ b/drivers/bluetooth/btmtk.c
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: ISC
+/* Copyright (C) 2021 MediaTek Inc.
+ *
+ */
+#include <linux/module.h>
+#include <linux/firmware.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btmtk.h"
+
+#define VERSION "0.1"
+
+/* It is for mt79xx download rom patch*/
+#define MTK_FW_ROM_PATCH_HEADER_SIZE	32
+#define MTK_FW_ROM_PATCH_GD_SIZE	64
+#define MTK_FW_ROM_PATCH_SEC_MAP_SIZE	64
+#define MTK_SEC_MAP_COMMON_SIZE	12
+#define MTK_SEC_MAP_NEED_SEND_SIZE	52
+
+struct btmtk_patch_header {
+	u8 datetime[16];
+	u8 platform[4];
+	__le16 hwver;
+	__le16 swver;
+	__le32 magicnum;
+} __packed;
+
+struct btmtk_global_desc {
+	__le32 patch_ver;
+	__le32 sub_sys;
+	__le32 feature_opt;
+	__le32 section_num;
+} __packed;
+
+struct btmtk_section_map {
+	__le32 sectype;
+	__le32 secoffset;
+	__le32 secsize;
+	union {
+		__le32 u4SecSpec[13];
+		struct {
+			__le32 dlAddr;
+			__le32 dlsize;
+			__le32 seckeyidx;
+			__le32 alignlen;
+			__le32 sectype;
+			__le32 dlmodecrctype;
+			__le32 crc;
+			__le32 reserved[6];
+		} bin_info_spec;
+	};
+} __packed;
+
+int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
+			      wmt_cmd_sync_func_t wmt_cmd_sync)
+{
+	struct btmtk_hci_wmt_params wmt_params;
+	struct btmtk_global_desc *globaldesc = NULL;
+	struct btmtk_section_map *sectionmap;
+	const struct firmware *fw;
+	const u8 *fw_ptr;
+	const u8 *fw_bin_ptr;
+	int err, dlen, i, status;
+	u8 flag, first_block, retry;
+	u32 section_num, dl_size, section_offset;
+	u8 cmd[64];
+
+	err = request_firmware(&fw, fwname, &hdev->dev);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
+		return err;
+	}
+
+	fw_ptr = fw->data;
+	fw_bin_ptr = fw_ptr;
+	globaldesc = (struct btmtk_global_desc *)(fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE);
+	section_num = le32_to_cpu(globaldesc->section_num);
+
+	for (i = 0; i < section_num; i++) {
+		first_block = 1;
+		fw_ptr = fw_bin_ptr;
+		sectionmap = (struct btmtk_section_map *)(fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE +
+			      MTK_FW_ROM_PATCH_GD_SIZE + MTK_FW_ROM_PATCH_SEC_MAP_SIZE * i);
+
+		section_offset = le32_to_cpu(sectionmap->secoffset);
+		dl_size = le32_to_cpu(sectionmap->bin_info_spec.dlsize);
+
+		if (dl_size > 0) {
+			retry = 20;
+			while (retry > 0) {
+				cmd[0] = 0; /* 0 means legacy dl mode. */
+				memcpy(cmd + 1,
+				       fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE +
+				       MTK_FW_ROM_PATCH_GD_SIZE +
+				       MTK_FW_ROM_PATCH_SEC_MAP_SIZE * i +
+				       MTK_SEC_MAP_COMMON_SIZE,
+				       MTK_SEC_MAP_NEED_SEND_SIZE + 1);
+
+				wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
+				wmt_params.status = &status;
+				wmt_params.flag = 0;
+				wmt_params.dlen = MTK_SEC_MAP_NEED_SEND_SIZE + 1;
+				wmt_params.data = &cmd;
+
+				err = wmt_cmd_sync(hdev, &wmt_params);
+				if (err < 0) {
+					bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
+						   err);
+					goto err_release_fw;
+				}
+
+				if (status == BTMTK_WMT_PATCH_UNDONE) {
+					break;
+				} else if (status == BTMTK_WMT_PATCH_PROGRESS) {
+					msleep(100);
+					retry--;
+				} else if (status == BTMTK_WMT_PATCH_DONE) {
+					goto next_section;
+				} else {
+					bt_dev_err(hdev, "Failed wmt patch dwnld status (%d)",
+						   status);
+					err = -EIO;
+					goto err_release_fw;
+				}
+			}
+
+			fw_ptr += section_offset;
+			wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
+			wmt_params.status = NULL;
+
+			while (dl_size > 0) {
+				dlen = min_t(int, 250, dl_size);
+				if (first_block == 1) {
+					flag = 1;
+					first_block = 0;
+				} else if (dl_size - dlen <= 0) {
+					flag = 3;
+				} else {
+					flag = 2;
+				}
+
+				wmt_params.flag = flag;
+				wmt_params.dlen = dlen;
+				wmt_params.data = fw_ptr;
+
+				err = wmt_cmd_sync(hdev, &wmt_params);
+				if (err < 0) {
+					bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
+						   err);
+					goto err_release_fw;
+				}
+
+				dl_size -= dlen;
+				fw_ptr += dlen;
+			}
+		}
+next_section:
+		continue;
+	}
+	/* Wait a few moments for firmware activation done */
+	usleep_range(100000, 120000);
+
+err_release_fw:
+	release_firmware(fw);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(btmtk_setup_firmware_79xx);
+
+int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
+			 wmt_cmd_sync_func_t wmt_cmd_sync)
+{
+	struct btmtk_hci_wmt_params wmt_params;
+	const struct firmware *fw;
+	const u8 *fw_ptr;
+	size_t fw_size;
+	int err, dlen;
+	u8 flag, param;
+
+	err = request_firmware(&fw, fwname, &hdev->dev);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
+		return err;
+	}
+
+	/* Power on data RAM the firmware relies on. */
+	param = 1;
+	wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+	wmt_params.flag = 3;
+	wmt_params.dlen = sizeof(param);
+	wmt_params.data = &param;
+	wmt_params.status = NULL;
+
+	err = wmt_cmd_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to power on data RAM (%d)", err);
+		goto err_release_fw;
+	}
+
+	fw_ptr = fw->data;
+	fw_size = fw->size;
+
+	/* The size of patch header is 30 bytes, should be skip */
+	if (fw_size < 30) {
+		err = -EINVAL;
+		goto err_release_fw;
+	}
+
+	fw_size -= 30;
+	fw_ptr += 30;
+	flag = 1;
+
+	wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
+	wmt_params.status = NULL;
+
+	while (fw_size > 0) {
+		dlen = min_t(int, 250, fw_size);
+
+		/* Tell device the position in sequence */
+		if (fw_size - dlen <= 0)
+			flag = 3;
+		else if (fw_size < fw->size - 30)
+			flag = 2;
+
+		wmt_params.flag = flag;
+		wmt_params.dlen = dlen;
+		wmt_params.data = fw_ptr;
+
+		err = wmt_cmd_sync(hdev, &wmt_params);
+		if (err < 0) {
+			bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
+				   err);
+			goto err_release_fw;
+		}
+
+		fw_size -= dlen;
+		fw_ptr += dlen;
+	}
+
+	wmt_params.op = BTMTK_WMT_RST;
+	wmt_params.flag = 4;
+	wmt_params.dlen = 0;
+	wmt_params.data = NULL;
+	wmt_params.status = NULL;
+
+	/* Activate funciton the firmware providing to */
+	err = wmt_cmd_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
+		goto err_release_fw;
+	}
+
+	/* Wait a few moments for firmware activation done */
+	usleep_range(10000, 12000);
+
+err_release_fw:
+	release_firmware(fw);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(btmtk_setup_firmware);
+
+int btmtk_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	long ret;
+
+	skb = __hci_cmd_sync(hdev, 0xfc1a, 6, bdaddr, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		bt_dev_err(hdev, "changing Mediatek device address failed (%ld)",
+			   ret);
+		return ret;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btmtk_set_bdaddr);
+
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_AUTHOR("Mark Chen <mark-yw.chen@mediatek.com>");
+MODULE_DESCRIPTION("Bluetooth support for MediaTek devices ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(FIRMWARE_MT7622);
+MODULE_FIRMWARE(FIRMWARE_MT7663);
+MODULE_FIRMWARE(FIRMWARE_MT7668);
+MODULE_FIRMWARE(FIRMWARE_MT7961);
diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
new file mode 100644
index 000000000..2a88ea8e4
--- /dev/null
+++ b/drivers/bluetooth/btmtk.h
@@ -0,0 +1,154 @@
+/* SPDX-License-Identifier: ISC */
+/* Copyright (C) 2021 MediaTek Inc. */
+
+#define FIRMWARE_MT7622		"mediatek/mt7622pr2h.bin"
+#define FIRMWARE_MT7663		"mediatek/mt7663pr2h.bin"
+#define FIRMWARE_MT7668		"mediatek/mt7668pr2h.bin"
+#define FIRMWARE_MT7961		"mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin"
+
+#define HCI_EV_WMT 0xe4
+#define HCI_WMT_MAX_EVENT_SIZE		64
+
+#define BTMTK_WMT_REG_WRITE 0x1
+#define BTMTK_WMT_REG_READ 0x2
+
+#define MT7921_BTSYS_RST 0x70002610
+#define MT7921_BTSYS_RST_WITH_GPIO BIT(7)
+
+#define MT7921_PINMUX_0 0x70005050
+#define MT7921_PINMUX_1 0x70005054
+
+#define MT7921_DLSTATUS 0x7c053c10
+#define BT_DL_STATE BIT(1)
+
+enum {
+	BTMTK_WMT_PATCH_DWNLD = 0x1,
+	BTMTK_WMT_TEST = 0x2,
+	BTMTK_WMT_WAKEUP = 0x3,
+	BTMTK_WMT_HIF = 0x4,
+	BTMTK_WMT_FUNC_CTRL = 0x6,
+	BTMTK_WMT_RST = 0x7,
+	BTMTK_WMT_REGISTER = 0x8,
+	BTMTK_WMT_SEMAPHORE = 0x17,
+};
+
+enum {
+	BTMTK_WMT_INVALID,
+	BTMTK_WMT_PATCH_UNDONE,
+	BTMTK_WMT_PATCH_PROGRESS,
+	BTMTK_WMT_PATCH_DONE,
+	BTMTK_WMT_ON_UNDONE,
+	BTMTK_WMT_ON_DONE,
+	BTMTK_WMT_ON_PROGRESS,
+};
+
+struct btmtk_wmt_hdr {
+	u8	dir;
+	u8	op;
+	__le16	dlen;
+	u8	flag;
+} __packed;
+
+struct btmtk_hci_wmt_cmd {
+	struct btmtk_wmt_hdr hdr;
+	u8 data[];
+} __packed;
+
+struct btmtk_hci_wmt_evt {
+	struct hci_event_hdr hhdr;
+	struct btmtk_wmt_hdr whdr;
+} __packed;
+
+struct btmtk_hci_wmt_evt_funcc {
+	struct btmtk_hci_wmt_evt hwhdr;
+	__be16 status;
+} __packed;
+
+struct btmtk_hci_wmt_evt_reg {
+	struct btmtk_hci_wmt_evt hwhdr;
+	u8 rsv[2];
+	u8 num;
+	__le32 addr;
+	__le32 val;
+} __packed;
+
+struct btmtk_tci_sleep {
+	u8 mode;
+	__le16 duration;
+	__le16 host_duration;
+	u8 host_wakeup_pin;
+	u8 time_compensation;
+} __packed;
+
+struct btmtk_wakeon {
+	u8 mode;
+	u8 gpo;
+	u8 active_high;
+	__le16 enable_delay;
+	__le16 wakeup_delay;
+} __packed;
+
+struct btmtk_sco {
+	u8 clock_config;
+	u8 transmit_format_config;
+	u8 channel_format_config;
+	u8 channel_select_config;
+} __packed;
+
+struct reg_read_cmd {
+	u8 type;
+	u8 rsv;
+	u8 num;
+	__le32 addr;
+} __packed;
+
+struct reg_write_cmd {
+	u8 type;
+	u8 rsv;
+	u8 num;
+	__le32 addr;
+	__le32 data;
+	__le32 mask;
+} __packed;
+
+struct btmtk_hci_wmt_params {
+	u8 op;
+	u8 flag;
+	u16 dlen;
+	const void *data;
+	u32 *status;
+};
+
+typedef int (*wmt_cmd_sync_func_t)(struct hci_dev *,
+				   struct btmtk_hci_wmt_params *);
+
+#if IS_ENABLED(CONFIG_BT_MTK)
+
+int btmtk_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+
+int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
+			      wmt_cmd_sync_func_t wmt_cmd_sync);
+
+int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
+			 wmt_cmd_sync_func_t wmt_cmd_sync);
+#else
+
+static inline int btmtk_set_bdaddr(struct hci_dev *hdev,
+				   const bdaddr_t *bdaddr)
+{
+	return -EOPNOTSUPP;
+}
+
+static int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
+				     wmt_cmd_sync_func_t wmt_cmd_sync)
+{
+	return -EOPNOTSUPP;
+}
+
+static int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
+				wmt_cmd_sync_func_t wmt_cmd_sync)
+{
+	return -EOPNOTSUPP;
+}
+
+#endif
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
new file mode 100644
index 000000000..f9a344475
--- /dev/null
+++ b/drivers/bluetooth/btmtksdio.c
@@ -0,0 +1,1503 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 MediaTek Inc.
+
+/*
+ * Bluetooth support for MediaTek SDIO devices
+ *
+ * This file is written based on btsdio.c and btmtkuart.c.
+ *
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+#include <asm/unaligned.h>
+#include <linux/atomic.h>
+#include <linux/gpio/consumer.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm_runtime.h>
+#include <linux/skbuff.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "h4_recv.h"
+#include "btmtk.h"
+
+#define VERSION "0.1"
+
+#define MTKBTSDIO_AUTOSUSPEND_DELAY	1000
+
+static bool enable_autosuspend = true;
+
+struct btmtksdio_data {
+	const char *fwname;
+	u16 chipid;
+	bool lp_mbox_supported;
+};
+
+static const struct btmtksdio_data mt7663_data = {
+	.fwname = FIRMWARE_MT7663,
+	.chipid = 0x7663,
+	.lp_mbox_supported = false,
+};
+
+static const struct btmtksdio_data mt7668_data = {
+	.fwname = FIRMWARE_MT7668,
+	.chipid = 0x7668,
+	.lp_mbox_supported = false,
+};
+
+static const struct btmtksdio_data mt7921_data = {
+	.fwname = FIRMWARE_MT7961,
+	.chipid = 0x7921,
+	.lp_mbox_supported = true,
+};
+
+static const struct sdio_device_id btmtksdio_table[] = {
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, SDIO_DEVICE_ID_MEDIATEK_MT7663),
+	 .driver_data = (kernel_ulong_t)&mt7663_data },
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, SDIO_DEVICE_ID_MEDIATEK_MT7668),
+	 .driver_data = (kernel_ulong_t)&mt7668_data },
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, SDIO_DEVICE_ID_MEDIATEK_MT7961),
+	 .driver_data = (kernel_ulong_t)&mt7921_data },
+	{ }	/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(sdio, btmtksdio_table);
+
+#define MTK_REG_CHLPCR		0x4	/* W1S */
+#define C_INT_EN_SET		BIT(0)
+#define C_INT_EN_CLR		BIT(1)
+#define C_FW_OWN_REQ_SET	BIT(8)  /* For write */
+#define C_COM_DRV_OWN		BIT(8)  /* For read */
+#define C_FW_OWN_REQ_CLR	BIT(9)
+
+#define MTK_REG_CSDIOCSR	0x8
+#define SDIO_RE_INIT_EN		BIT(0)
+#define SDIO_INT_CTL		BIT(2)
+
+#define MTK_REG_CHCR		0xc
+#define C_INT_CLR_CTRL		BIT(1)
+#define BT_RST_DONE		BIT(8)
+
+/* CHISR have the same bits field definition with CHIER */
+#define MTK_REG_CHISR		0x10
+#define MTK_REG_CHIER		0x14
+#define FW_OWN_BACK_INT		BIT(0)
+#define RX_DONE_INT		BIT(1)
+#define TX_EMPTY		BIT(2)
+#define TX_FIFO_OVERFLOW	BIT(8)
+#define FW_MAILBOX_INT		BIT(15)
+#define INT_MASK		GENMASK(15, 0)
+#define RX_PKT_LEN		GENMASK(31, 16)
+
+#define MTK_REG_CSICR		0xc0
+#define CSICR_CLR_MBOX_ACK BIT(0)
+#define MTK_REG_PH2DSM0R	0xc4
+#define PH2DSM0R_DRIVER_OWN	BIT(0)
+#define MTK_REG_PD2HRM0R	0xdc
+#define PD2HRM0R_DRV_OWN	BIT(0)
+
+#define MTK_REG_CTDR		0x18
+
+#define MTK_REG_CRDR		0x1c
+
+#define MTK_REG_CRPLR		0x24
+
+#define MTK_SDIO_BLOCK_SIZE	256
+
+#define BTMTKSDIO_TX_WAIT_VND_EVT	1
+#define BTMTKSDIO_HW_TX_READY		2
+#define BTMTKSDIO_FUNC_ENABLED		3
+#define BTMTKSDIO_PATCH_ENABLED		4
+#define BTMTKSDIO_HW_RESET_ACTIVE	5
+
+struct mtkbtsdio_hdr {
+	__le16	len;
+	__le16	reserved;
+	u8	bt_type;
+} __packed;
+
+struct btmtksdio_dev {
+	struct hci_dev *hdev;
+	struct sdio_func *func;
+	struct device *dev;
+
+	struct work_struct txrx_work;
+	unsigned long tx_state;
+	struct sk_buff_head txq;
+
+	struct sk_buff *evt_skb;
+
+	const struct btmtksdio_data *data;
+
+	struct gpio_desc *reset;
+};
+
+static int mtk_hci_wmt_sync(struct hci_dev *hdev,
+			    struct btmtk_hci_wmt_params *wmt_params)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
+	struct btmtk_hci_wmt_evt_reg *wmt_evt_reg;
+	u32 hlen, status = BTMTK_WMT_INVALID;
+	struct btmtk_hci_wmt_evt *wmt_evt;
+	struct btmtk_hci_wmt_cmd *wc;
+	struct btmtk_wmt_hdr *hdr;
+	int err;
+
+	/* Send the WMT command and wait until the WMT event returns */
+	hlen = sizeof(*hdr) + wmt_params->dlen;
+	if (hlen > 255)
+		return -EINVAL;
+
+	wc = kzalloc(hlen, GFP_KERNEL);
+	if (!wc)
+		return -ENOMEM;
+
+	hdr = &wc->hdr;
+	hdr->dir = 1;
+	hdr->op = wmt_params->op;
+	hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
+	hdr->flag = wmt_params->flag;
+	memcpy(wc->data, wmt_params->data, wmt_params->dlen);
+
+	set_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+
+	err = __hci_cmd_send(hdev, 0xfc6f, hlen, wc);
+	if (err < 0) {
+		clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+		goto err_free_wc;
+	}
+
+	/* The vendor specific WMT commands are all answered by a vendor
+	 * specific event and will not have the Command Status or Command
+	 * Complete as with usual HCI command flow control.
+	 *
+	 * After sending the command, wait for BTMTKSDIO_TX_WAIT_VND_EVT
+	 * state to be cleared. The driver specific event receive routine
+	 * will clear that state and with that indicate completion of the
+	 * WMT command.
+	 */
+	err = wait_on_bit_timeout(&bdev->tx_state, BTMTKSDIO_TX_WAIT_VND_EVT,
+				  TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
+	if (err == -EINTR) {
+		bt_dev_err(hdev, "Execution of wmt command interrupted");
+		clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+		goto err_free_wc;
+	}
+
+	if (err) {
+		bt_dev_err(hdev, "Execution of wmt command timed out");
+		clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state);
+		err = -ETIMEDOUT;
+		goto err_free_wc;
+	}
+
+	/* Parse and handle the return WMT event */
+	wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data;
+	if (wmt_evt->whdr.op != hdr->op) {
+		bt_dev_err(hdev, "Wrong op received %d expected %d",
+			   wmt_evt->whdr.op, hdr->op);
+		err = -EIO;
+		goto err_free_skb;
+	}
+
+	switch (wmt_evt->whdr.op) {
+	case BTMTK_WMT_SEMAPHORE:
+		if (wmt_evt->whdr.flag == 2)
+			status = BTMTK_WMT_PATCH_UNDONE;
+		else
+			status = BTMTK_WMT_PATCH_DONE;
+		break;
+	case BTMTK_WMT_FUNC_CTRL:
+		wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
+		if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
+			status = BTMTK_WMT_ON_DONE;
+		else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
+			status = BTMTK_WMT_ON_PROGRESS;
+		else
+			status = BTMTK_WMT_ON_UNDONE;
+		break;
+	case BTMTK_WMT_PATCH_DWNLD:
+		if (wmt_evt->whdr.flag == 2)
+			status = BTMTK_WMT_PATCH_DONE;
+		else if (wmt_evt->whdr.flag == 1)
+			status = BTMTK_WMT_PATCH_PROGRESS;
+		else
+			status = BTMTK_WMT_PATCH_UNDONE;
+		break;
+	case BTMTK_WMT_REGISTER:
+		wmt_evt_reg = (struct btmtk_hci_wmt_evt_reg *)wmt_evt;
+		if (le16_to_cpu(wmt_evt->whdr.dlen) == 12)
+			status = le32_to_cpu(wmt_evt_reg->val);
+		break;
+	}
+
+	if (wmt_params->status)
+		*wmt_params->status = status;
+
+err_free_skb:
+	kfree_skb(bdev->evt_skb);
+	bdev->evt_skb = NULL;
+err_free_wc:
+	kfree(wc);
+
+	return err;
+}
+
+static int btmtksdio_tx_packet(struct btmtksdio_dev *bdev,
+			       struct sk_buff *skb)
+{
+	struct mtkbtsdio_hdr *sdio_hdr;
+	int err;
+
+	/* Make sure that there are enough rooms for SDIO header */
+	if (unlikely(skb_headroom(skb) < sizeof(*sdio_hdr))) {
+		err = pskb_expand_head(skb, sizeof(*sdio_hdr), 0,
+				       GFP_ATOMIC);
+		if (err < 0)
+			return err;
+	}
+
+	/* Prepend MediaTek SDIO Specific Header */
+	skb_push(skb, sizeof(*sdio_hdr));
+
+	sdio_hdr = (void *)skb->data;
+	sdio_hdr->len = cpu_to_le16(skb->len);
+	sdio_hdr->reserved = cpu_to_le16(0);
+	sdio_hdr->bt_type = hci_skb_pkt_type(skb);
+
+	clear_bit(BTMTKSDIO_HW_TX_READY, &bdev->tx_state);
+	err = sdio_writesb(bdev->func, MTK_REG_CTDR, skb->data,
+			   round_up(skb->len, MTK_SDIO_BLOCK_SIZE));
+	if (err < 0)
+		goto err_skb_pull;
+
+	bdev->hdev->stat.byte_tx += skb->len;
+
+	kfree_skb(skb);
+
+	return 0;
+
+err_skb_pull:
+	skb_pull(skb, sizeof(*sdio_hdr));
+
+	return err;
+}
+
+static u32 btmtksdio_drv_own_query(struct btmtksdio_dev *bdev)
+{
+	return sdio_readl(bdev->func, MTK_REG_CHLPCR, NULL);
+}
+
+static u32 btmtksdio_drv_own_query_79xx(struct btmtksdio_dev *bdev)
+{
+	return sdio_readl(bdev->func, MTK_REG_PD2HRM0R, NULL);
+}
+
+static u32 btmtksdio_chcr_query(struct btmtksdio_dev *bdev)
+{
+	return sdio_readl(bdev->func, MTK_REG_CHCR, NULL);
+}
+
+static int btmtksdio_fw_pmctrl(struct btmtksdio_dev *bdev)
+{
+	u32 status;
+	int err;
+
+	sdio_claim_host(bdev->func);
+
+	if (bdev->data->lp_mbox_supported &&
+	    test_bit(BTMTKSDIO_PATCH_ENABLED, &bdev->tx_state)) {
+		sdio_writel(bdev->func, CSICR_CLR_MBOX_ACK, MTK_REG_CSICR,
+			    &err);
+		err = readx_poll_timeout(btmtksdio_drv_own_query_79xx, bdev,
+					 status, !(status & PD2HRM0R_DRV_OWN),
+					 2000, 1000000);
+		if (err < 0) {
+			bt_dev_err(bdev->hdev, "mailbox ACK not cleared");
+			goto out;
+		}
+	}
+
+	/* Return ownership to the device */
+	sdio_writel(bdev->func, C_FW_OWN_REQ_SET, MTK_REG_CHLPCR, &err);
+	if (err < 0)
+		goto out;
+
+	err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status,
+				 !(status & C_COM_DRV_OWN), 2000, 1000000);
+
+out:
+	sdio_release_host(bdev->func);
+
+	if (err < 0)
+		bt_dev_err(bdev->hdev, "Cannot return ownership to device");
+
+	return err;
+}
+
+static int btmtksdio_drv_pmctrl(struct btmtksdio_dev *bdev)
+{
+	u32 status;
+	int err;
+
+	sdio_claim_host(bdev->func);
+
+	/* Get ownership from the device */
+	sdio_writel(bdev->func, C_FW_OWN_REQ_CLR, MTK_REG_CHLPCR, &err);
+	if (err < 0)
+		goto out;
+
+	err = readx_poll_timeout(btmtksdio_drv_own_query, bdev, status,
+				 status & C_COM_DRV_OWN, 2000, 1000000);
+
+	if (!err && bdev->data->lp_mbox_supported &&
+	    test_bit(BTMTKSDIO_PATCH_ENABLED, &bdev->tx_state))
+		err = readx_poll_timeout(btmtksdio_drv_own_query_79xx, bdev,
+					 status, status & PD2HRM0R_DRV_OWN,
+					 2000, 1000000);
+
+out:
+	sdio_release_host(bdev->func);
+
+	if (err < 0)
+		bt_dev_err(bdev->hdev, "Cannot get ownership from device");
+
+	return err;
+}
+
+static int btmtksdio_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	struct hci_event_hdr *hdr = (void *)skb->data;
+	u8 evt = hdr->evt;
+	int err;
+
+	/* When someone waits for the WMT event, the skb is being cloned
+	 * and being processed the events from there then.
+	 */
+	if (test_bit(BTMTKSDIO_TX_WAIT_VND_EVT, &bdev->tx_state)) {
+		bdev->evt_skb = skb_clone(skb, GFP_KERNEL);
+		if (!bdev->evt_skb) {
+			err = -ENOMEM;
+			goto err_out;
+		}
+	}
+
+	err = hci_recv_frame(hdev, skb);
+	if (err < 0)
+		goto err_free_skb;
+
+	if (evt == HCI_EV_WMT) {
+		if (test_and_clear_bit(BTMTKSDIO_TX_WAIT_VND_EVT,
+				       &bdev->tx_state)) {
+			/* Barrier to sync with other CPUs */
+			smp_mb__after_atomic();
+			wake_up_bit(&bdev->tx_state, BTMTKSDIO_TX_WAIT_VND_EVT);
+		}
+	}
+
+	return 0;
+
+err_free_skb:
+	kfree_skb(bdev->evt_skb);
+	bdev->evt_skb = NULL;
+
+err_out:
+	return err;
+}
+
+static int btmtksdio_recv_acl(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	u16 handle = le16_to_cpu(hci_acl_hdr(skb)->handle);
+
+	switch (handle) {
+	case 0xfc6f:
+		/* Firmware dump from device: when the firmware hangs, the
+		 * device can no longer suspend and thus disable auto-suspend.
+		 */
+		pm_runtime_forbid(bdev->dev);
+		fallthrough;
+	case 0x05ff:
+	case 0x05fe:
+		/* Firmware debug logging */
+		return hci_recv_diag(hdev, skb);
+	}
+
+	return hci_recv_frame(hdev, skb);
+}
+
+static const struct h4_recv_pkt mtk_recv_pkts[] = {
+	{ H4_RECV_ACL,      .recv = btmtksdio_recv_acl },
+	{ H4_RECV_SCO,      .recv = hci_recv_frame },
+	{ H4_RECV_EVENT,    .recv = btmtksdio_recv_event },
+};
+
+static int btmtksdio_rx_packet(struct btmtksdio_dev *bdev, u16 rx_size)
+{
+	const struct h4_recv_pkt *pkts = mtk_recv_pkts;
+	int pkts_count = ARRAY_SIZE(mtk_recv_pkts);
+	struct mtkbtsdio_hdr *sdio_hdr;
+	int err, i, pad_size;
+	struct sk_buff *skb;
+	u16 dlen;
+
+	if (rx_size < sizeof(*sdio_hdr))
+		return -EILSEQ;
+
+	/* A SDIO packet is exactly containing a Bluetooth packet */
+	skb = bt_skb_alloc(rx_size, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put(skb, rx_size);
+
+	err = sdio_readsb(bdev->func, skb->data, MTK_REG_CRDR, rx_size);
+	if (err < 0)
+		goto err_kfree_skb;
+
+	sdio_hdr = (void *)skb->data;
+
+	/* We assume the default error as -EILSEQ simply to make the error path
+	 * be cleaner.
+	 */
+	err = -EILSEQ;
+
+	if (rx_size != le16_to_cpu(sdio_hdr->len)) {
+		bt_dev_err(bdev->hdev, "Rx size in sdio header is mismatched ");
+		goto err_kfree_skb;
+	}
+
+	hci_skb_pkt_type(skb) = sdio_hdr->bt_type;
+
+	/* Remove MediaTek SDIO header */
+	skb_pull(skb, sizeof(*sdio_hdr));
+
+	/* We have to dig into the packet to get payload size and then know how
+	 * many padding bytes at the tail, these padding bytes should be removed
+	 * before the packet is indicated to the core layer.
+	 */
+	for (i = 0; i < pkts_count; i++) {
+		if (sdio_hdr->bt_type == (&pkts[i])->type)
+			break;
+	}
+
+	if (i >= pkts_count) {
+		bt_dev_err(bdev->hdev, "Invalid bt type 0x%02x",
+			   sdio_hdr->bt_type);
+		goto err_kfree_skb;
+	}
+
+	/* Remaining bytes cannot hold a header*/
+	if (skb->len < (&pkts[i])->hlen) {
+		bt_dev_err(bdev->hdev, "The size of bt header is mismatched");
+		goto err_kfree_skb;
+	}
+
+	switch ((&pkts[i])->lsize) {
+	case 1:
+		dlen = skb->data[(&pkts[i])->loff];
+		break;
+	case 2:
+		dlen = get_unaligned_le16(skb->data +
+						  (&pkts[i])->loff);
+		break;
+	default:
+		goto err_kfree_skb;
+	}
+
+	pad_size = skb->len - (&pkts[i])->hlen -  dlen;
+
+	/* Remaining bytes cannot hold a payload */
+	if (pad_size < 0) {
+		bt_dev_err(bdev->hdev, "The size of bt payload is mismatched");
+		goto err_kfree_skb;
+	}
+
+	/* Remove padding bytes */
+	skb_trim(skb, skb->len - pad_size);
+
+	/* Complete frame */
+	(&pkts[i])->recv(bdev->hdev, skb);
+
+	bdev->hdev->stat.byte_rx += rx_size;
+
+	return 0;
+
+err_kfree_skb:
+	kfree_skb(skb);
+
+	return err;
+}
+
+static void btmtksdio_txrx_work(struct work_struct *work)
+{
+	struct btmtksdio_dev *bdev = container_of(work, struct btmtksdio_dev,
+						  txrx_work);
+	unsigned long txrx_timeout;
+	u32 int_status, rx_size;
+	struct sk_buff *skb;
+	int err;
+
+	pm_runtime_get_sync(bdev->dev);
+
+	sdio_claim_host(bdev->func);
+
+	/* Disable interrupt */
+	sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, 0);
+
+	txrx_timeout = jiffies + 5 * HZ;
+
+	do {
+		int_status = sdio_readl(bdev->func, MTK_REG_CHISR, NULL);
+
+		/* Ack an interrupt as soon as possible before any operation on
+		 * hardware.
+		 *
+		 * Note that we don't ack any status during operations to avoid race
+		 * condition between the host and the device such as it's possible to
+		 * mistakenly ack RX_DONE for the next packet and then cause interrupts
+		 * not be raised again but there is still pending data in the hardware
+		 * FIFO.
+		 */
+		sdio_writel(bdev->func, int_status, MTK_REG_CHISR, NULL);
+		int_status &= INT_MASK;
+
+		if ((int_status & FW_MAILBOX_INT) &&
+		    bdev->data->chipid == 0x7921) {
+			sdio_writel(bdev->func, PH2DSM0R_DRIVER_OWN,
+				    MTK_REG_PH2DSM0R, 0);
+		}
+
+		if (int_status & FW_OWN_BACK_INT)
+			bt_dev_dbg(bdev->hdev, "Get fw own back");
+
+		if (int_status & TX_EMPTY)
+			set_bit(BTMTKSDIO_HW_TX_READY, &bdev->tx_state);
+
+		else if (unlikely(int_status & TX_FIFO_OVERFLOW))
+			bt_dev_warn(bdev->hdev, "Tx fifo overflow");
+
+		if (test_bit(BTMTKSDIO_HW_TX_READY, &bdev->tx_state)) {
+			skb = skb_dequeue(&bdev->txq);
+			if (skb) {
+				err = btmtksdio_tx_packet(bdev, skb);
+				if (err < 0) {
+					bdev->hdev->stat.err_tx++;
+					skb_queue_head(&bdev->txq, skb);
+				}
+			}
+		}
+
+		if (int_status & RX_DONE_INT) {
+			rx_size = sdio_readl(bdev->func, MTK_REG_CRPLR, NULL);
+			rx_size = (rx_size & RX_PKT_LEN) >> 16;
+			if (btmtksdio_rx_packet(bdev, rx_size) < 0)
+				bdev->hdev->stat.err_rx++;
+		}
+	} while (int_status || time_is_before_jiffies(txrx_timeout));
+
+	/* Enable interrupt */
+	sdio_writel(bdev->func, C_INT_EN_SET, MTK_REG_CHLPCR, 0);
+
+	sdio_release_host(bdev->func);
+
+	pm_runtime_mark_last_busy(bdev->dev);
+	pm_runtime_put_autosuspend(bdev->dev);
+}
+
+static void btmtksdio_interrupt(struct sdio_func *func)
+{
+	struct btmtksdio_dev *bdev = sdio_get_drvdata(func);
+
+	/* Disable interrupt */
+	sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, 0);
+
+	schedule_work(&bdev->txrx_work);
+}
+
+static int btmtksdio_open(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	u32 val;
+	int err;
+
+	sdio_claim_host(bdev->func);
+
+	err = sdio_enable_func(bdev->func);
+	if (err < 0)
+		goto err_release_host;
+
+	set_bit(BTMTKSDIO_FUNC_ENABLED, &bdev->tx_state);
+
+	err = btmtksdio_drv_pmctrl(bdev);
+	if (err < 0)
+		goto err_disable_func;
+
+	/* Disable interrupt & mask out all interrupt sources */
+	sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, &err);
+	if (err < 0)
+		goto err_disable_func;
+
+	sdio_writel(bdev->func, 0, MTK_REG_CHIER, &err);
+	if (err < 0)
+		goto err_disable_func;
+
+	err = sdio_claim_irq(bdev->func, btmtksdio_interrupt);
+	if (err < 0)
+		goto err_disable_func;
+
+	err = sdio_set_block_size(bdev->func, MTK_SDIO_BLOCK_SIZE);
+	if (err < 0)
+		goto err_release_irq;
+
+	/* SDIO CMD 5 allows the SDIO device back to idle state an
+	 * synchronous interrupt is supported in SDIO 4-bit mode
+	 */
+	val = sdio_readl(bdev->func, MTK_REG_CSDIOCSR, &err);
+	if (err < 0)
+		goto err_release_irq;
+
+	val |= SDIO_INT_CTL;
+	sdio_writel(bdev->func, val, MTK_REG_CSDIOCSR, &err);
+	if (err < 0)
+		goto err_release_irq;
+
+	/* Explitly set write-1-clear method */
+	val = sdio_readl(bdev->func, MTK_REG_CHCR, &err);
+	if (err < 0)
+		goto err_release_irq;
+
+	val |= C_INT_CLR_CTRL;
+	sdio_writel(bdev->func, val, MTK_REG_CHCR, &err);
+	if (err < 0)
+		goto err_release_irq;
+
+	/* Setup interrupt sources */
+	sdio_writel(bdev->func, RX_DONE_INT | TX_EMPTY | TX_FIFO_OVERFLOW,
+		    MTK_REG_CHIER, &err);
+	if (err < 0)
+		goto err_release_irq;
+
+	/* Enable interrupt */
+	sdio_writel(bdev->func, C_INT_EN_SET, MTK_REG_CHLPCR, &err);
+	if (err < 0)
+		goto err_release_irq;
+
+	sdio_release_host(bdev->func);
+
+	return 0;
+
+err_release_irq:
+	sdio_release_irq(bdev->func);
+
+err_disable_func:
+	sdio_disable_func(bdev->func);
+
+err_release_host:
+	sdio_release_host(bdev->func);
+
+	return err;
+}
+
+static int btmtksdio_close(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+
+	sdio_claim_host(bdev->func);
+
+	/* Disable interrupt */
+	sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, NULL);
+
+	sdio_release_irq(bdev->func);
+
+	cancel_work_sync(&bdev->txrx_work);
+
+	btmtksdio_fw_pmctrl(bdev);
+
+	clear_bit(BTMTKSDIO_FUNC_ENABLED, &bdev->tx_state);
+	sdio_disable_func(bdev->func);
+
+	sdio_release_host(bdev->func);
+
+	return 0;
+}
+
+static int btmtksdio_flush(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+
+	skb_queue_purge(&bdev->txq);
+
+	cancel_work_sync(&bdev->txrx_work);
+
+	return 0;
+}
+
+static int btmtksdio_func_query(struct hci_dev *hdev)
+{
+	struct btmtk_hci_wmt_params wmt_params;
+	int status, err;
+	u8 param = 0;
+
+	/* Query whether the function is enabled */
+	wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+	wmt_params.flag = 4;
+	wmt_params.dlen = sizeof(param);
+	wmt_params.data = &param;
+	wmt_params.status = &status;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to query function status (%d)", err);
+		return err;
+	}
+
+	return status;
+}
+
+static int mt76xx_setup(struct hci_dev *hdev, const char *fwname)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	struct btmtk_hci_wmt_params wmt_params;
+	struct btmtk_tci_sleep tci_sleep;
+	struct sk_buff *skb;
+	int err, status;
+	u8 param = 0x1;
+
+	/* Query whether the firmware is already download */
+	wmt_params.op = BTMTK_WMT_SEMAPHORE;
+	wmt_params.flag = 1;
+	wmt_params.dlen = 0;
+	wmt_params.data = NULL;
+	wmt_params.status = &status;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
+		return err;
+	}
+
+	if (status == BTMTK_WMT_PATCH_DONE) {
+		bt_dev_info(hdev, "Firmware already downloaded");
+		goto ignore_setup_fw;
+	}
+
+	/* Setup a firmware which the device definitely requires */
+	err = btmtk_setup_firmware(hdev, fwname, mtk_hci_wmt_sync);
+	if (err < 0)
+		return err;
+
+ignore_setup_fw:
+	/* Query whether the device is already enabled */
+	err = readx_poll_timeout(btmtksdio_func_query, hdev, status,
+				 status < 0 || status != BTMTK_WMT_ON_PROGRESS,
+				 2000, 5000000);
+	/* -ETIMEDOUT happens */
+	if (err < 0)
+		return err;
+
+	/* The other errors happen in btusb_mtk_func_query */
+	if (status < 0)
+		return status;
+
+	if (status == BTMTK_WMT_ON_DONE) {
+		bt_dev_info(hdev, "function already on");
+		goto ignore_func_on;
+	}
+
+	/* Enable Bluetooth protocol */
+	wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+	wmt_params.flag = 0;
+	wmt_params.dlen = sizeof(param);
+	wmt_params.data = &param;
+	wmt_params.status = NULL;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+		return err;
+	}
+
+	set_bit(BTMTKSDIO_PATCH_ENABLED, &bdev->tx_state);
+
+ignore_func_on:
+	/* Apply the low power environment setup */
+	tci_sleep.mode = 0x5;
+	tci_sleep.duration = cpu_to_le16(0x640);
+	tci_sleep.host_duration = cpu_to_le16(0x640);
+	tci_sleep.host_wakeup_pin = 0;
+	tci_sleep.time_compensation = 0;
+
+	skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int mt79xx_setup(struct hci_dev *hdev, const char *fwname)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	struct btmtk_hci_wmt_params wmt_params;
+	u8 param = 0x1;
+	int err;
+
+	err = btmtk_setup_firmware_79xx(hdev, fwname, mtk_hci_wmt_sync);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to setup 79xx firmware (%d)", err);
+		return err;
+	}
+
+	err = btmtksdio_fw_pmctrl(bdev);
+	if (err < 0)
+		return err;
+
+	err = btmtksdio_drv_pmctrl(bdev);
+	if (err < 0)
+		return err;
+
+	/* Enable Bluetooth protocol */
+	wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+	wmt_params.flag = 0;
+	wmt_params.dlen = sizeof(param);
+	wmt_params.data = &param;
+	wmt_params.status = NULL;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+		return err;
+	}
+
+	hci_set_msft_opcode(hdev, 0xFD30);
+	hci_set_aosp_capable(hdev);
+	set_bit(BTMTKSDIO_PATCH_ENABLED, &bdev->tx_state);
+
+	return err;
+}
+
+static int btmtksdio_mtk_reg_read(struct hci_dev *hdev, u32 reg, u32 *val)
+{
+	struct btmtk_hci_wmt_params wmt_params;
+	struct reg_read_cmd reg_read = {
+		.type = 1,
+		.num = 1,
+	};
+	u32 status;
+	int err;
+
+	reg_read.addr = cpu_to_le32(reg);
+	wmt_params.op = BTMTK_WMT_REGISTER;
+	wmt_params.flag = BTMTK_WMT_REG_READ;
+	wmt_params.dlen = sizeof(reg_read);
+	wmt_params.data = &reg_read;
+	wmt_params.status = &status;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to read reg (%d)", err);
+		return err;
+	}
+
+	*val = status;
+
+	return err;
+}
+
+static int btmtksdio_mtk_reg_write(struct hci_dev *hdev, u32 reg, u32 val, u32 mask)
+{
+	struct btmtk_hci_wmt_params wmt_params;
+	const struct reg_write_cmd reg_write = {
+		.type = 1,
+		.num = 1,
+		.addr = cpu_to_le32(reg),
+		.data = cpu_to_le32(val),
+		.mask = cpu_to_le32(mask),
+	};
+	int err, status;
+
+	wmt_params.op = BTMTK_WMT_REGISTER;
+	wmt_params.flag = BTMTK_WMT_REG_WRITE;
+	wmt_params.dlen = sizeof(reg_write);
+	wmt_params.data = &reg_write;
+	wmt_params.status = &status;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0)
+		bt_dev_err(hdev, "Failed to write reg (%d)", err);
+
+	return err;
+}
+
+static int btmtksdio_get_data_path_id(struct hci_dev *hdev, __u8 *data_path_id)
+{
+	/* uses 1 as data path id for all the usecases */
+	*data_path_id = 1;
+	return 0;
+}
+
+static int btmtksdio_get_codec_config_data(struct hci_dev *hdev,
+					   __u8 link, struct bt_codec *codec,
+					   __u8 *ven_len, __u8 **ven_data)
+{
+	int err = 0;
+
+	if (!ven_data || !ven_len)
+		return -EINVAL;
+
+	*ven_len = 0;
+	*ven_data = NULL;
+
+	if (link != ESCO_LINK) {
+		bt_dev_err(hdev, "Invalid link type(%u)", link);
+		return -EINVAL;
+	}
+
+	*ven_data = kmalloc(sizeof(__u8), GFP_KERNEL);
+	if (!*ven_data) {
+		err = -ENOMEM;
+		goto error;
+	}
+
+	/* supports only CVSD and mSBC offload codecs */
+	switch (codec->id) {
+	case 0x02:
+		**ven_data = 0x00;
+		break;
+	case 0x05:
+		**ven_data = 0x01;
+		break;
+	default:
+		err = -EINVAL;
+		bt_dev_err(hdev, "Invalid codec id(%u)", codec->id);
+		goto error;
+	}
+	/* codec and its capabilities are pre-defined to ids
+	 * preset id = 0x00 represents CVSD codec with sampling rate 8K
+	 * preset id = 0x01 represents mSBC codec with sampling rate 16K
+	 */
+	*ven_len = sizeof(__u8);
+	return err;
+
+error:
+	kfree(*ven_data);
+	*ven_data = NULL;
+	return err;
+}
+
+static int btmtksdio_sco_setting(struct hci_dev *hdev)
+{
+	const struct btmtk_sco sco_setting = {
+		.clock_config = 0x49,
+		.channel_format_config = 0x80,
+	};
+	struct sk_buff *skb;
+	u32 val;
+	int err;
+
+	/* Enable SCO over I2S/PCM for MediaTek chipset */
+	skb =  __hci_cmd_sync(hdev, 0xfc72, sizeof(sco_setting),
+			      &sco_setting, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	kfree_skb(skb);
+
+	err = btmtksdio_mtk_reg_read(hdev, MT7921_PINMUX_0, &val);
+	if (err < 0)
+		return err;
+
+	val |= 0x11000000;
+	err = btmtksdio_mtk_reg_write(hdev, MT7921_PINMUX_0, val, ~0);
+	if (err < 0)
+		return err;
+
+	err = btmtksdio_mtk_reg_read(hdev, MT7921_PINMUX_1, &val);
+	if (err < 0)
+		return err;
+
+	val |= 0x00000101;
+	err =  btmtksdio_mtk_reg_write(hdev, MT7921_PINMUX_1, val, ~0);
+	if (err < 0)
+		return err;
+
+	hdev->get_data_path_id = btmtksdio_get_data_path_id;
+	hdev->get_codec_config_data = btmtksdio_get_codec_config_data;
+
+	return err;
+}
+
+static int btmtksdio_reset_setting(struct hci_dev *hdev)
+{
+	int err;
+	u32 val;
+
+	err = btmtksdio_mtk_reg_read(hdev, MT7921_PINMUX_1, &val);
+	if (err < 0)
+		return err;
+
+	val |= 0x20; /* set the pin (bit field 11:8) work as GPIO mode */
+	err = btmtksdio_mtk_reg_write(hdev, MT7921_PINMUX_1, val, ~0);
+	if (err < 0)
+		return err;
+
+	err = btmtksdio_mtk_reg_read(hdev, MT7921_BTSYS_RST, &val);
+	if (err < 0)
+		return err;
+
+	val |= MT7921_BTSYS_RST_WITH_GPIO;
+	return btmtksdio_mtk_reg_write(hdev, MT7921_BTSYS_RST, val, ~0);
+}
+
+static int btmtksdio_setup(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	ktime_t calltime, delta, rettime;
+	unsigned long long duration;
+	char fwname[64];
+	int err, dev_id;
+	u32 fw_version = 0, val;
+
+	calltime = ktime_get();
+	set_bit(BTMTKSDIO_HW_TX_READY, &bdev->tx_state);
+
+	switch (bdev->data->chipid) {
+	case 0x7921:
+		if (test_bit(BTMTKSDIO_HW_RESET_ACTIVE, &bdev->tx_state)) {
+			err = btmtksdio_mtk_reg_read(hdev, MT7921_DLSTATUS,
+						     &val);
+			if (err < 0)
+				return err;
+
+			val &= ~BT_DL_STATE;
+			err = btmtksdio_mtk_reg_write(hdev, MT7921_DLSTATUS,
+						      val, ~0);
+			if (err < 0)
+				return err;
+
+			btmtksdio_fw_pmctrl(bdev);
+			msleep(20);
+			btmtksdio_drv_pmctrl(bdev);
+
+			clear_bit(BTMTKSDIO_HW_RESET_ACTIVE, &bdev->tx_state);
+		}
+
+		err = btmtksdio_mtk_reg_read(hdev, 0x70010200, &dev_id);
+		if (err < 0) {
+			bt_dev_err(hdev, "Failed to get device id (%d)", err);
+			return err;
+		}
+
+		err = btmtksdio_mtk_reg_read(hdev, 0x80021004, &fw_version);
+		if (err < 0) {
+			bt_dev_err(hdev, "Failed to get fw version (%d)", err);
+			return err;
+		}
+
+		snprintf(fwname, sizeof(fwname),
+			 "mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
+			 dev_id & 0xffff, (fw_version & 0xff) + 1);
+		err = mt79xx_setup(hdev, fwname);
+		if (err < 0)
+			return err;
+
+		/* Enable SCO over I2S/PCM */
+		err = btmtksdio_sco_setting(hdev);
+		if (err < 0) {
+			bt_dev_err(hdev, "Failed to enable SCO setting (%d)", err);
+			return err;
+		}
+
+		/* Enable WBS with mSBC codec */
+		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+
+		/* Enable GPIO reset mechanism */
+		if (bdev->reset) {
+			err = btmtksdio_reset_setting(hdev);
+			if (err < 0) {
+				bt_dev_err(hdev, "Failed to enable Reset setting (%d)", err);
+				devm_gpiod_put(bdev->dev, bdev->reset);
+				bdev->reset = NULL;
+			}
+		}
+
+		/* Valid LE States quirk for MediaTek 7921 */
+		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+
+		break;
+	case 0x7663:
+	case 0x7668:
+		err = mt76xx_setup(hdev, bdev->data->fwname);
+		if (err < 0)
+			return err;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+	pm_runtime_set_autosuspend_delay(bdev->dev,
+					 MTKBTSDIO_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(bdev->dev);
+
+	err = pm_runtime_set_active(bdev->dev);
+	if (err < 0)
+		return err;
+
+	/* Default forbid runtime auto suspend, that can be allowed by
+	 * enable_autosuspend flag or the PM runtime entry under sysfs.
+	 */
+	pm_runtime_forbid(bdev->dev);
+	pm_runtime_enable(bdev->dev);
+
+	if (enable_autosuspend)
+		pm_runtime_allow(bdev->dev);
+
+	bt_dev_info(hdev, "Device setup in %llu usecs", duration);
+
+	return 0;
+}
+
+static int btmtksdio_shutdown(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	struct btmtk_hci_wmt_params wmt_params;
+	u8 param = 0x0;
+	int err;
+
+	/* Get back the state to be consistent with the state
+	 * in btmtksdio_setup.
+	 */
+	pm_runtime_get_sync(bdev->dev);
+
+	/* wmt command only works until the reset is complete */
+	if (test_bit(BTMTKSDIO_HW_RESET_ACTIVE, &bdev->tx_state))
+		goto ignore_wmt_cmd;
+
+	/* Disable the device */
+	wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+	wmt_params.flag = 0;
+	wmt_params.dlen = sizeof(param);
+	wmt_params.data = &param;
+	wmt_params.status = NULL;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+		return err;
+	}
+
+ignore_wmt_cmd:
+	pm_runtime_put_noidle(bdev->dev);
+	pm_runtime_disable(bdev->dev);
+
+	return 0;
+}
+
+static int btmtksdio_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+
+	default:
+		return -EILSEQ;
+	}
+
+	skb_queue_tail(&bdev->txq, skb);
+
+	schedule_work(&bdev->txrx_work);
+
+	return 0;
+}
+
+static void btmtksdio_cmd_timeout(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	u32 status;
+	int err;
+
+	if (!bdev->reset || bdev->data->chipid != 0x7921)
+		return;
+
+	pm_runtime_get_sync(bdev->dev);
+
+	if (test_and_set_bit(BTMTKSDIO_HW_RESET_ACTIVE, &bdev->tx_state))
+		return;
+
+	sdio_claim_host(bdev->func);
+
+	sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, NULL);
+	skb_queue_purge(&bdev->txq);
+	cancel_work_sync(&bdev->txrx_work);
+
+	gpiod_set_value_cansleep(bdev->reset, 1);
+	msleep(100);
+	gpiod_set_value_cansleep(bdev->reset, 0);
+
+	err = readx_poll_timeout(btmtksdio_chcr_query, bdev, status,
+				 status & BT_RST_DONE, 100000, 2000000);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to reset (%d)", err);
+		goto err;
+	}
+
+	clear_bit(BTMTKSDIO_PATCH_ENABLED, &bdev->tx_state);
+err:
+	sdio_release_host(bdev->func);
+
+	pm_runtime_put_noidle(bdev->dev);
+	pm_runtime_disable(bdev->dev);
+
+	hci_reset_dev(hdev);
+}
+
+static bool btmtksdio_sdio_inband_wakeup(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+
+	return device_may_wakeup(bdev->dev);
+}
+
+static bool btmtksdio_sdio_wakeup(struct hci_dev *hdev)
+{
+	struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+	bool may_wakeup = device_may_wakeup(bdev->dev);
+	const struct btmtk_wakeon bt_awake = {
+		.mode = 0x1,
+		.gpo = 0,
+		.active_high = 0x1,
+		.enable_delay = cpu_to_le16(0xc80),
+		.wakeup_delay = cpu_to_le16(0x20),
+	};
+
+	if (may_wakeup && bdev->data->chipid == 0x7921) {
+		struct sk_buff *skb;
+
+		skb =  __hci_cmd_sync(hdev, 0xfc27, sizeof(bt_awake),
+				      &bt_awake, HCI_CMD_TIMEOUT);
+		if (IS_ERR(skb))
+			may_wakeup = false;
+		else
+			kfree_skb(skb);
+	}
+
+	return may_wakeup;
+}
+
+static int btmtksdio_probe(struct sdio_func *func,
+			   const struct sdio_device_id *id)
+{
+	struct btmtksdio_dev *bdev;
+	struct hci_dev *hdev;
+	int err;
+
+	bdev = devm_kzalloc(&func->dev, sizeof(*bdev), GFP_KERNEL);
+	if (!bdev)
+		return -ENOMEM;
+
+	bdev->data = (void *)id->driver_data;
+	if (!bdev->data)
+		return -ENODEV;
+
+	bdev->dev = &func->dev;
+	bdev->func = func;
+
+	INIT_WORK(&bdev->txrx_work, btmtksdio_txrx_work);
+	skb_queue_head_init(&bdev->txq);
+
+	/* Initialize and register HCI device */
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		dev_err(&func->dev, "Can't allocate HCI device\n");
+		return -ENOMEM;
+	}
+
+	bdev->hdev = hdev;
+
+	hdev->bus = HCI_SDIO;
+	hci_set_drvdata(hdev, bdev);
+
+	hdev->open     = btmtksdio_open;
+	hdev->close    = btmtksdio_close;
+	hdev->cmd_timeout = btmtksdio_cmd_timeout;
+	hdev->flush    = btmtksdio_flush;
+	hdev->setup    = btmtksdio_setup;
+	hdev->shutdown = btmtksdio_shutdown;
+	hdev->send     = btmtksdio_send_frame;
+	hdev->wakeup   = btmtksdio_sdio_wakeup;
+	/*
+	 * If SDIO controller supports wake on Bluetooth, sending a wakeon
+	 * command is not necessary.
+	 */
+	if (device_can_wakeup(func->card->host->parent))
+		hdev->wakeup = btmtksdio_sdio_inband_wakeup;
+	else
+		hdev->wakeup = btmtksdio_sdio_wakeup;
+	hdev->set_bdaddr = btmtk_set_bdaddr;
+
+	SET_HCIDEV_DEV(hdev, &func->dev);
+
+	hdev->manufacturer = 70;
+	set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+
+	sdio_set_drvdata(func, bdev);
+
+	err = hci_register_dev(hdev);
+	if (err < 0) {
+		dev_err(&func->dev, "Can't register HCI device\n");
+		hci_free_dev(hdev);
+		return err;
+	}
+
+	/* pm_runtime_enable would be done after the firmware is being
+	 * downloaded because the core layer probably already enables
+	 * runtime PM for this func such as the case host->caps &
+	 * MMC_CAP_POWER_OFF_CARD.
+	 */
+	if (pm_runtime_enabled(bdev->dev))
+		pm_runtime_disable(bdev->dev);
+
+	/* As explaination in drivers/mmc/core/sdio_bus.c tells us:
+	 * Unbound SDIO functions are always suspended.
+	 * During probe, the function is set active and the usage count
+	 * is incremented.  If the driver supports runtime PM,
+	 * it should call pm_runtime_put_noidle() in its probe routine and
+	 * pm_runtime_get_noresume() in its remove routine.
+	 *
+	 * So, put a pm_runtime_put_noidle here !
+	 */
+	pm_runtime_put_noidle(bdev->dev);
+
+	err = device_init_wakeup(bdev->dev, true);
+	if (err)
+		bt_dev_err(hdev, "failed to initialize device wakeup");
+
+	bdev->dev->of_node = of_find_compatible_node(NULL, NULL,
+						     "mediatek,mt7921s-bluetooth");
+	bdev->reset = devm_gpiod_get_optional(bdev->dev, "reset",
+					      GPIOD_OUT_LOW);
+	if (IS_ERR(bdev->reset))
+		err = PTR_ERR(bdev->reset);
+
+	return err;
+}
+
+static void btmtksdio_remove(struct sdio_func *func)
+{
+	struct btmtksdio_dev *bdev = sdio_get_drvdata(func);
+	struct hci_dev *hdev;
+
+	if (!bdev)
+		return;
+
+	/* Be consistent the state in btmtksdio_probe */
+	pm_runtime_get_noresume(bdev->dev);
+
+	hdev = bdev->hdev;
+
+	sdio_set_drvdata(func, NULL);
+	hci_unregister_dev(hdev);
+	hci_free_dev(hdev);
+}
+
+#ifdef CONFIG_PM
+static int btmtksdio_runtime_suspend(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct btmtksdio_dev *bdev;
+	int err;
+
+	bdev = sdio_get_drvdata(func);
+	if (!bdev)
+		return 0;
+
+	if (!test_bit(BTMTKSDIO_FUNC_ENABLED, &bdev->tx_state))
+		return 0;
+
+	sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+
+	err = btmtksdio_fw_pmctrl(bdev);
+
+	bt_dev_dbg(bdev->hdev, "status (%d) return ownership to device", err);
+
+	return err;
+}
+
+static int btmtksdio_runtime_resume(struct device *dev)
+{
+	struct sdio_func *func = dev_to_sdio_func(dev);
+	struct btmtksdio_dev *bdev;
+	int err;
+
+	bdev = sdio_get_drvdata(func);
+	if (!bdev)
+		return 0;
+
+	if (!test_bit(BTMTKSDIO_FUNC_ENABLED, &bdev->tx_state))
+		return 0;
+
+	err = btmtksdio_drv_pmctrl(bdev);
+
+	bt_dev_dbg(bdev->hdev, "status (%d) get ownership from device", err);
+
+	return err;
+}
+
+static UNIVERSAL_DEV_PM_OPS(btmtksdio_pm_ops, btmtksdio_runtime_suspend,
+			    btmtksdio_runtime_resume, NULL);
+#define BTMTKSDIO_PM_OPS (&btmtksdio_pm_ops)
+#else	/* CONFIG_PM */
+#define BTMTKSDIO_PM_OPS NULL
+#endif	/* CONFIG_PM */
+
+static struct sdio_driver btmtksdio_driver = {
+	.name		= "btmtksdio",
+	.probe		= btmtksdio_probe,
+	.remove		= btmtksdio_remove,
+	.id_table	= btmtksdio_table,
+	.drv = {
+		.owner = THIS_MODULE,
+		.pm = BTMTKSDIO_PM_OPS,
+	}
+};
+
+module_sdio_driver(btmtksdio_driver);
+
+module_param(enable_autosuspend, bool, 0644);
+MODULE_PARM_DESC(enable_autosuspend, "Enable autosuspend by default");
+
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek Bluetooth SDIO driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btmtkuart.c b/drivers/bluetooth/btmtkuart.c
new file mode 100644
index 000000000..04b72394d
--- /dev/null
+++ b/drivers/bluetooth/btmtkuart.c
@@ -0,0 +1,995 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 MediaTek Inc.
+
+/*
+ * Bluetooth support for MediaTek serial devices
+ *
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+#include <asm/unaligned.h>
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/serdev.h>
+#include <linux/skbuff.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "h4_recv.h"
+#include "btmtk.h"
+
+#define VERSION "0.2"
+
+#define MTK_STP_TLR_SIZE	2
+
+#define BTMTKUART_TX_STATE_ACTIVE	1
+#define BTMTKUART_TX_STATE_WAKEUP	2
+#define BTMTKUART_TX_WAIT_VND_EVT	3
+#define BTMTKUART_REQUIRED_WAKEUP	4
+
+#define BTMTKUART_FLAG_STANDALONE_HW	 BIT(0)
+
+struct mtk_stp_hdr {
+	u8	prefix;
+	__be16	dlen;
+	u8	cs;
+} __packed;
+
+struct btmtkuart_data {
+	unsigned int flags;
+	const char *fwname;
+};
+
+struct btmtkuart_dev {
+	struct hci_dev *hdev;
+	struct serdev_device *serdev;
+
+	struct clk *clk;
+	struct clk *osc;
+	struct regulator *vcc;
+	struct gpio_desc *reset;
+	struct gpio_desc *boot;
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pins_runtime;
+	struct pinctrl_state *pins_boot;
+	speed_t	desired_speed;
+	speed_t	curr_speed;
+
+	struct work_struct tx_work;
+	unsigned long tx_state;
+	struct sk_buff_head txq;
+
+	struct sk_buff *rx_skb;
+	struct sk_buff *evt_skb;
+
+	u8	stp_pad[6];
+	u8	stp_cursor;
+	u16	stp_dlen;
+
+	const struct btmtkuart_data *data;
+};
+
+#define btmtkuart_is_standalone(bdev)	\
+	((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW)
+#define btmtkuart_is_builtin_soc(bdev)	\
+	!((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW)
+
+static int mtk_hci_wmt_sync(struct hci_dev *hdev,
+			    struct btmtk_hci_wmt_params *wmt_params)
+{
+	struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
+	struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
+	u32 hlen, status = BTMTK_WMT_INVALID;
+	struct btmtk_hci_wmt_evt *wmt_evt;
+	struct btmtk_hci_wmt_cmd *wc;
+	struct btmtk_wmt_hdr *hdr;
+	int err;
+
+	/* Send the WMT command and wait until the WMT event returns */
+	hlen = sizeof(*hdr) + wmt_params->dlen;
+	if (hlen > 255) {
+		err = -EINVAL;
+		goto err_free_skb;
+	}
+
+	wc = kzalloc(hlen, GFP_KERNEL);
+	if (!wc) {
+		err = -ENOMEM;
+		goto err_free_skb;
+	}
+
+	hdr = &wc->hdr;
+	hdr->dir = 1;
+	hdr->op = wmt_params->op;
+	hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
+	hdr->flag = wmt_params->flag;
+	memcpy(wc->data, wmt_params->data, wmt_params->dlen);
+
+	set_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
+
+	err = __hci_cmd_send(hdev, 0xfc6f, hlen, wc);
+	if (err < 0) {
+		clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
+		goto err_free_wc;
+	}
+
+	/* The vendor specific WMT commands are all answered by a vendor
+	 * specific event and will not have the Command Status or Command
+	 * Complete as with usual HCI command flow control.
+	 *
+	 * After sending the command, wait for BTMTKUART_TX_WAIT_VND_EVT
+	 * state to be cleared. The driver specific event receive routine
+	 * will clear that state and with that indicate completion of the
+	 * WMT command.
+	 */
+	err = wait_on_bit_timeout(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT,
+				  TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
+	if (err == -EINTR) {
+		bt_dev_err(hdev, "Execution of wmt command interrupted");
+		clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
+		goto err_free_wc;
+	}
+
+	if (err) {
+		bt_dev_err(hdev, "Execution of wmt command timed out");
+		clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
+		err = -ETIMEDOUT;
+		goto err_free_wc;
+	}
+
+	/* Parse and handle the return WMT event */
+	wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data;
+	if (wmt_evt->whdr.op != hdr->op) {
+		bt_dev_err(hdev, "Wrong op received %d expected %d",
+			   wmt_evt->whdr.op, hdr->op);
+		err = -EIO;
+		goto err_free_wc;
+	}
+
+	switch (wmt_evt->whdr.op) {
+	case BTMTK_WMT_SEMAPHORE:
+		if (wmt_evt->whdr.flag == 2)
+			status = BTMTK_WMT_PATCH_UNDONE;
+		else
+			status = BTMTK_WMT_PATCH_DONE;
+		break;
+	case BTMTK_WMT_FUNC_CTRL:
+		wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
+		if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
+			status = BTMTK_WMT_ON_DONE;
+		else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
+			status = BTMTK_WMT_ON_PROGRESS;
+		else
+			status = BTMTK_WMT_ON_UNDONE;
+		break;
+	}
+
+	if (wmt_params->status)
+		*wmt_params->status = status;
+
+err_free_wc:
+	kfree(wc);
+err_free_skb:
+	kfree_skb(bdev->evt_skb);
+	bdev->evt_skb = NULL;
+
+	return err;
+}
+
+static int btmtkuart_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
+	struct hci_event_hdr *hdr = (void *)skb->data;
+	int err;
+
+	/* When someone waits for the WMT event, the skb is being cloned
+	 * and being processed the events from there then.
+	 */
+	if (test_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state)) {
+		bdev->evt_skb = skb_clone(skb, GFP_KERNEL);
+		if (!bdev->evt_skb) {
+			err = -ENOMEM;
+			goto err_out;
+		}
+	}
+
+	err = hci_recv_frame(hdev, skb);
+	if (err < 0)
+		goto err_free_skb;
+
+	if (hdr->evt == HCI_EV_WMT) {
+		if (test_and_clear_bit(BTMTKUART_TX_WAIT_VND_EVT,
+				       &bdev->tx_state)) {
+			/* Barrier to sync with other CPUs */
+			smp_mb__after_atomic();
+			wake_up_bit(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT);
+		}
+	}
+
+	return 0;
+
+err_free_skb:
+	kfree_skb(bdev->evt_skb);
+	bdev->evt_skb = NULL;
+
+err_out:
+	return err;
+}
+
+static const struct h4_recv_pkt mtk_recv_pkts[] = {
+	{ H4_RECV_ACL,      .recv = hci_recv_frame },
+	{ H4_RECV_SCO,      .recv = hci_recv_frame },
+	{ H4_RECV_EVENT,    .recv = btmtkuart_recv_event },
+};
+
+static void btmtkuart_tx_work(struct work_struct *work)
+{
+	struct btmtkuart_dev *bdev = container_of(work, struct btmtkuart_dev,
+						   tx_work);
+	struct serdev_device *serdev = bdev->serdev;
+	struct hci_dev *hdev = bdev->hdev;
+
+	while (1) {
+		clear_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state);
+
+		while (1) {
+			struct sk_buff *skb = skb_dequeue(&bdev->txq);
+			int len;
+
+			if (!skb)
+				break;
+
+			len = serdev_device_write_buf(serdev, skb->data,
+						      skb->len);
+			hdev->stat.byte_tx += len;
+
+			skb_pull(skb, len);
+			if (skb->len > 0) {
+				skb_queue_head(&bdev->txq, skb);
+				break;
+			}
+
+			switch (hci_skb_pkt_type(skb)) {
+			case HCI_COMMAND_PKT:
+				hdev->stat.cmd_tx++;
+				break;
+			case HCI_ACLDATA_PKT:
+				hdev->stat.acl_tx++;
+				break;
+			case HCI_SCODATA_PKT:
+				hdev->stat.sco_tx++;
+				break;
+			}
+
+			kfree_skb(skb);
+		}
+
+		if (!test_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state))
+			break;
+	}
+
+	clear_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state);
+}
+
+static void btmtkuart_tx_wakeup(struct btmtkuart_dev *bdev)
+{
+	if (test_and_set_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state))
+		set_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state);
+
+	schedule_work(&bdev->tx_work);
+}
+
+static const unsigned char *
+mtk_stp_split(struct btmtkuart_dev *bdev, const unsigned char *data, int count,
+	      int *sz_h4)
+{
+	struct mtk_stp_hdr *shdr;
+
+	/* The cursor is reset when all the data of STP is consumed out */
+	if (!bdev->stp_dlen && bdev->stp_cursor >= 6)
+		bdev->stp_cursor = 0;
+
+	/* Filling pad until all STP info is obtained */
+	while (bdev->stp_cursor < 6 && count > 0) {
+		bdev->stp_pad[bdev->stp_cursor] = *data;
+		bdev->stp_cursor++;
+		data++;
+		count--;
+	}
+
+	/* Retrieve STP info and have a sanity check */
+	if (!bdev->stp_dlen && bdev->stp_cursor >= 6) {
+		shdr = (struct mtk_stp_hdr *)&bdev->stp_pad[2];
+		bdev->stp_dlen = be16_to_cpu(shdr->dlen) & 0x0fff;
+
+		/* Resync STP when unexpected data is being read */
+		if (shdr->prefix != 0x80 || bdev->stp_dlen > 2048) {
+			bt_dev_err(bdev->hdev, "stp format unexpect (%d, %d)",
+				   shdr->prefix, bdev->stp_dlen);
+			bdev->stp_cursor = 2;
+			bdev->stp_dlen = 0;
+		}
+	}
+
+	/* Directly quit when there's no data found for H4 can process */
+	if (count <= 0)
+		return NULL;
+
+	/* Tranlate to how much the size of data H4 can handle so far */
+	*sz_h4 = min_t(int, count, bdev->stp_dlen);
+
+	/* Update the remaining size of STP packet */
+	bdev->stp_dlen -= *sz_h4;
+
+	/* Data points to STP payload which can be handled by H4 */
+	return data;
+}
+
+static void btmtkuart_recv(struct hci_dev *hdev, const u8 *data, size_t count)
+{
+	struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
+	const unsigned char *p_left = data, *p_h4;
+	int sz_left = count, sz_h4, adv;
+	int err;
+
+	while (sz_left > 0) {
+		/*  The serial data received from MT7622 BT controller is
+		 *  at all time padded around with the STP header and tailer.
+		 *
+		 *  A full STP packet is looking like
+		 *   -----------------------------------
+		 *  | STP header  |  H:4   | STP tailer |
+		 *   -----------------------------------
+		 *  but it doesn't guarantee to contain a full H:4 packet which
+		 *  means that it's possible for multiple STP packets forms a
+		 *  full H:4 packet that means extra STP header + length doesn't
+		 *  indicate a full H:4 frame, things can fragment. Whose length
+		 *  recorded in STP header just shows up the most length the
+		 *  H:4 engine can handle currently.
+		 */
+
+		p_h4 = mtk_stp_split(bdev, p_left, sz_left, &sz_h4);
+		if (!p_h4)
+			break;
+
+		adv = p_h4 - p_left;
+		sz_left -= adv;
+		p_left += adv;
+
+		bdev->rx_skb = h4_recv_buf(bdev->hdev, bdev->rx_skb, p_h4,
+					   sz_h4, mtk_recv_pkts,
+					   ARRAY_SIZE(mtk_recv_pkts));
+		if (IS_ERR(bdev->rx_skb)) {
+			err = PTR_ERR(bdev->rx_skb);
+			bt_dev_err(bdev->hdev,
+				   "Frame reassembly failed (%d)", err);
+			bdev->rx_skb = NULL;
+			return;
+		}
+
+		sz_left -= sz_h4;
+		p_left += sz_h4;
+	}
+}
+
+static int btmtkuart_receive_buf(struct serdev_device *serdev, const u8 *data,
+				 size_t count)
+{
+	struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
+
+	btmtkuart_recv(bdev->hdev, data, count);
+
+	bdev->hdev->stat.byte_rx += count;
+
+	return count;
+}
+
+static void btmtkuart_write_wakeup(struct serdev_device *serdev)
+{
+	struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
+
+	btmtkuart_tx_wakeup(bdev);
+}
+
+static const struct serdev_device_ops btmtkuart_client_ops = {
+	.receive_buf = btmtkuart_receive_buf,
+	.write_wakeup = btmtkuart_write_wakeup,
+};
+
+static int btmtkuart_open(struct hci_dev *hdev)
+{
+	struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
+	struct device *dev;
+	int err;
+
+	err = serdev_device_open(bdev->serdev);
+	if (err) {
+		bt_dev_err(hdev, "Unable to open UART device %s",
+			   dev_name(&bdev->serdev->dev));
+		goto err_open;
+	}
+
+	if (btmtkuart_is_standalone(bdev)) {
+		if (bdev->curr_speed != bdev->desired_speed)
+			err = serdev_device_set_baudrate(bdev->serdev,
+							 115200);
+		else
+			err = serdev_device_set_baudrate(bdev->serdev,
+							 bdev->desired_speed);
+
+		if (err < 0) {
+			bt_dev_err(hdev, "Unable to set baudrate UART device %s",
+				   dev_name(&bdev->serdev->dev));
+			goto  err_serdev_close;
+		}
+
+		serdev_device_set_flow_control(bdev->serdev, false);
+	}
+
+	bdev->stp_cursor = 2;
+	bdev->stp_dlen = 0;
+
+	dev = &bdev->serdev->dev;
+
+	/* Enable the power domain and clock the device requires */
+	pm_runtime_enable(dev);
+	err = pm_runtime_resume_and_get(dev);
+	if (err < 0)
+		goto err_disable_rpm;
+
+	err = clk_prepare_enable(bdev->clk);
+	if (err < 0)
+		goto err_put_rpm;
+
+	return 0;
+
+err_put_rpm:
+	pm_runtime_put_sync(dev);
+err_disable_rpm:
+	pm_runtime_disable(dev);
+err_serdev_close:
+	serdev_device_close(bdev->serdev);
+err_open:
+	return err;
+}
+
+static int btmtkuart_close(struct hci_dev *hdev)
+{
+	struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
+	struct device *dev = &bdev->serdev->dev;
+
+	/* Shutdown the clock and power domain the device requires */
+	clk_disable_unprepare(bdev->clk);
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
+	serdev_device_close(bdev->serdev);
+
+	return 0;
+}
+
+static int btmtkuart_flush(struct hci_dev *hdev)
+{
+	struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
+
+	/* Flush any pending characters */
+	serdev_device_write_flush(bdev->serdev);
+	skb_queue_purge(&bdev->txq);
+
+	cancel_work_sync(&bdev->tx_work);
+
+	kfree_skb(bdev->rx_skb);
+	bdev->rx_skb = NULL;
+
+	bdev->stp_cursor = 2;
+	bdev->stp_dlen = 0;
+
+	return 0;
+}
+
+static int btmtkuart_func_query(struct hci_dev *hdev)
+{
+	struct btmtk_hci_wmt_params wmt_params;
+	int status, err;
+	u8 param = 0;
+
+	/* Query whether the function is enabled */
+	wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+	wmt_params.flag = 4;
+	wmt_params.dlen = sizeof(param);
+	wmt_params.data = &param;
+	wmt_params.status = &status;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to query function status (%d)", err);
+		return err;
+	}
+
+	return status;
+}
+
+static int btmtkuart_change_baudrate(struct hci_dev *hdev)
+{
+	struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
+	struct btmtk_hci_wmt_params wmt_params;
+	__le32 baudrate;
+	u8 param;
+	int err;
+
+	/* Indicate the device to enter the probe state the host is
+	 * ready to change a new baudrate.
+	 */
+	baudrate = cpu_to_le32(bdev->desired_speed);
+	wmt_params.op = BTMTK_WMT_HIF;
+	wmt_params.flag = 1;
+	wmt_params.dlen = 4;
+	wmt_params.data = &baudrate;
+	wmt_params.status = NULL;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to device baudrate (%d)", err);
+		return err;
+	}
+
+	err = serdev_device_set_baudrate(bdev->serdev,
+					 bdev->desired_speed);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to set up host baudrate (%d)",
+			   err);
+		return err;
+	}
+
+	serdev_device_set_flow_control(bdev->serdev, false);
+
+	/* Send a dummy byte 0xff to activate the new baudrate */
+	param = 0xff;
+	err = serdev_device_write_buf(bdev->serdev, &param, sizeof(param));
+	if (err < 0 || err < sizeof(param))
+		return err;
+
+	serdev_device_wait_until_sent(bdev->serdev, 0);
+
+	/* Wait some time for the device changing baudrate done */
+	usleep_range(20000, 22000);
+
+	/* Test the new baudrate */
+	wmt_params.op = BTMTK_WMT_TEST;
+	wmt_params.flag = 7;
+	wmt_params.dlen = 0;
+	wmt_params.data = NULL;
+	wmt_params.status = NULL;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to test new baudrate (%d)",
+			   err);
+		return err;
+	}
+
+	bdev->curr_speed = bdev->desired_speed;
+
+	return 0;
+}
+
+static int btmtkuart_setup(struct hci_dev *hdev)
+{
+	struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
+	struct btmtk_hci_wmt_params wmt_params;
+	ktime_t calltime, delta, rettime;
+	struct btmtk_tci_sleep tci_sleep;
+	unsigned long long duration;
+	struct sk_buff *skb;
+	int err, status;
+	u8 param = 0x1;
+
+	calltime = ktime_get();
+
+	/* Wakeup MCUSYS is required for certain devices before we start to
+	 * do any setups.
+	 */
+	if (test_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state)) {
+		wmt_params.op = BTMTK_WMT_WAKEUP;
+		wmt_params.flag = 3;
+		wmt_params.dlen = 0;
+		wmt_params.data = NULL;
+		wmt_params.status = NULL;
+
+		err = mtk_hci_wmt_sync(hdev, &wmt_params);
+		if (err < 0) {
+			bt_dev_err(hdev, "Failed to wakeup the chip (%d)", err);
+			return err;
+		}
+
+		clear_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state);
+	}
+
+	if (btmtkuart_is_standalone(bdev))
+		btmtkuart_change_baudrate(hdev);
+
+	/* Query whether the firmware is already download */
+	wmt_params.op = BTMTK_WMT_SEMAPHORE;
+	wmt_params.flag = 1;
+	wmt_params.dlen = 0;
+	wmt_params.data = NULL;
+	wmt_params.status = &status;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
+		return err;
+	}
+
+	if (status == BTMTK_WMT_PATCH_DONE) {
+		bt_dev_info(hdev, "Firmware already downloaded");
+		goto ignore_setup_fw;
+	}
+
+	/* Setup a firmware which the device definitely requires */
+	err = btmtk_setup_firmware(hdev, bdev->data->fwname, mtk_hci_wmt_sync);
+	if (err < 0)
+		return err;
+
+ignore_setup_fw:
+	/* Query whether the device is already enabled */
+	err = readx_poll_timeout(btmtkuart_func_query, hdev, status,
+				 status < 0 || status != BTMTK_WMT_ON_PROGRESS,
+				 2000, 5000000);
+	/* -ETIMEDOUT happens */
+	if (err < 0)
+		return err;
+
+	/* The other errors happen in btusb_mtk_func_query */
+	if (status < 0)
+		return status;
+
+	if (status == BTMTK_WMT_ON_DONE) {
+		bt_dev_info(hdev, "function already on");
+		goto ignore_func_on;
+	}
+
+	/* Enable Bluetooth protocol */
+	wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+	wmt_params.flag = 0;
+	wmt_params.dlen = sizeof(param);
+	wmt_params.data = &param;
+	wmt_params.status = NULL;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+		return err;
+	}
+
+ignore_func_on:
+	/* Apply the low power environment setup */
+	tci_sleep.mode = 0x5;
+	tci_sleep.duration = cpu_to_le16(0x640);
+	tci_sleep.host_duration = cpu_to_le16(0x640);
+	tci_sleep.host_wakeup_pin = 0;
+	tci_sleep.time_compensation = 0;
+
+	skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Device setup in %llu usecs", duration);
+
+	return 0;
+}
+
+static int btmtkuart_shutdown(struct hci_dev *hdev)
+{
+	struct btmtk_hci_wmt_params wmt_params;
+	u8 param = 0x0;
+	int err;
+
+	/* Disable the device */
+	wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+	wmt_params.flag = 0;
+	wmt_params.dlen = sizeof(param);
+	wmt_params.data = &param;
+	wmt_params.status = NULL;
+
+	err = mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int btmtkuart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
+	struct mtk_stp_hdr *shdr;
+	int err, dlen, type = 0;
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+
+	/* Make sure that there is enough rooms for STP header and trailer */
+	if (unlikely(skb_headroom(skb) < sizeof(*shdr)) ||
+	    (skb_tailroom(skb) < MTK_STP_TLR_SIZE)) {
+		err = pskb_expand_head(skb, sizeof(*shdr), MTK_STP_TLR_SIZE,
+				       GFP_ATOMIC);
+		if (err < 0)
+			return err;
+	}
+
+	/* Add the STP header */
+	dlen = skb->len;
+	shdr = skb_push(skb, sizeof(*shdr));
+	shdr->prefix = 0x80;
+	shdr->dlen = cpu_to_be16((dlen & 0x0fff) | (type << 12));
+	shdr->cs = 0;		/* MT7622 doesn't care about checksum value */
+
+	/* Add the STP trailer */
+	skb_put_zero(skb, MTK_STP_TLR_SIZE);
+
+	skb_queue_tail(&bdev->txq, skb);
+
+	btmtkuart_tx_wakeup(bdev);
+	return 0;
+}
+
+static int btmtkuart_parse_dt(struct serdev_device *serdev)
+{
+	struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
+	struct device_node *node = serdev->dev.of_node;
+	u32 speed = 921600;
+	int err;
+
+	if (btmtkuart_is_standalone(bdev)) {
+		of_property_read_u32(node, "current-speed", &speed);
+
+		bdev->desired_speed = speed;
+
+		bdev->vcc = devm_regulator_get(&serdev->dev, "vcc");
+		if (IS_ERR(bdev->vcc)) {
+			err = PTR_ERR(bdev->vcc);
+			return err;
+		}
+
+		bdev->osc = devm_clk_get_optional(&serdev->dev, "osc");
+		if (IS_ERR(bdev->osc)) {
+			err = PTR_ERR(bdev->osc);
+			return err;
+		}
+
+		bdev->boot = devm_gpiod_get_optional(&serdev->dev, "boot",
+						     GPIOD_OUT_LOW);
+		if (IS_ERR(bdev->boot)) {
+			err = PTR_ERR(bdev->boot);
+			return err;
+		}
+
+		bdev->pinctrl = devm_pinctrl_get(&serdev->dev);
+		if (IS_ERR(bdev->pinctrl)) {
+			err = PTR_ERR(bdev->pinctrl);
+			return err;
+		}
+
+		bdev->pins_boot = pinctrl_lookup_state(bdev->pinctrl,
+						       "default");
+		if (IS_ERR(bdev->pins_boot) && !bdev->boot) {
+			err = PTR_ERR(bdev->pins_boot);
+			dev_err(&serdev->dev,
+				"Should assign RXD to LOW at boot stage\n");
+			return err;
+		}
+
+		bdev->pins_runtime = pinctrl_lookup_state(bdev->pinctrl,
+							  "runtime");
+		if (IS_ERR(bdev->pins_runtime)) {
+			err = PTR_ERR(bdev->pins_runtime);
+			return err;
+		}
+
+		bdev->reset = devm_gpiod_get_optional(&serdev->dev, "reset",
+						      GPIOD_OUT_LOW);
+		if (IS_ERR(bdev->reset)) {
+			err = PTR_ERR(bdev->reset);
+			return err;
+		}
+	} else if (btmtkuart_is_builtin_soc(bdev)) {
+		bdev->clk = devm_clk_get(&serdev->dev, "ref");
+		if (IS_ERR(bdev->clk))
+			return PTR_ERR(bdev->clk);
+	}
+
+	return 0;
+}
+
+static int btmtkuart_probe(struct serdev_device *serdev)
+{
+	struct btmtkuart_dev *bdev;
+	struct hci_dev *hdev;
+	int err;
+
+	bdev = devm_kzalloc(&serdev->dev, sizeof(*bdev), GFP_KERNEL);
+	if (!bdev)
+		return -ENOMEM;
+
+	bdev->data = of_device_get_match_data(&serdev->dev);
+	if (!bdev->data)
+		return -ENODEV;
+
+	bdev->serdev = serdev;
+	serdev_device_set_drvdata(serdev, bdev);
+
+	serdev_device_set_client_ops(serdev, &btmtkuart_client_ops);
+
+	err = btmtkuart_parse_dt(serdev);
+	if (err < 0)
+		return err;
+
+	INIT_WORK(&bdev->tx_work, btmtkuart_tx_work);
+	skb_queue_head_init(&bdev->txq);
+
+	/* Initialize and register HCI device */
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		dev_err(&serdev->dev, "Can't allocate HCI device\n");
+		return -ENOMEM;
+	}
+
+	bdev->hdev = hdev;
+
+	hdev->bus = HCI_UART;
+	hci_set_drvdata(hdev, bdev);
+
+	hdev->open     = btmtkuart_open;
+	hdev->close    = btmtkuart_close;
+	hdev->flush    = btmtkuart_flush;
+	hdev->setup    = btmtkuart_setup;
+	hdev->shutdown = btmtkuart_shutdown;
+	hdev->send     = btmtkuart_send_frame;
+	hdev->set_bdaddr = btmtk_set_bdaddr;
+	SET_HCIDEV_DEV(hdev, &serdev->dev);
+
+	hdev->manufacturer = 70;
+	set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+
+	if (btmtkuart_is_standalone(bdev)) {
+		err = clk_prepare_enable(bdev->osc);
+		if (err < 0)
+			goto err_hci_free_dev;
+
+		if (bdev->boot) {
+			gpiod_set_value_cansleep(bdev->boot, 1);
+		} else {
+			/* Switch to the specific pin state for the booting
+			 * requires.
+			 */
+			pinctrl_select_state(bdev->pinctrl, bdev->pins_boot);
+		}
+
+		/* Power on */
+		err = regulator_enable(bdev->vcc);
+		if (err < 0)
+			goto err_clk_disable_unprepare;
+
+		/* Reset if the reset-gpios is available otherwise the board
+		 * -level design should be guaranteed.
+		 */
+		if (bdev->reset) {
+			gpiod_set_value_cansleep(bdev->reset, 1);
+			usleep_range(1000, 2000);
+			gpiod_set_value_cansleep(bdev->reset, 0);
+		}
+
+		/* Wait some time until device got ready and switch to the pin
+		 * mode the device requires for UART transfers.
+		 */
+		msleep(50);
+
+		if (bdev->boot)
+			devm_gpiod_put(&serdev->dev, bdev->boot);
+
+		pinctrl_select_state(bdev->pinctrl, bdev->pins_runtime);
+
+		/* A standalone device doesn't depends on power domain on SoC,
+		 * so mark it as no callbacks.
+		 */
+		pm_runtime_no_callbacks(&serdev->dev);
+
+		set_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state);
+	}
+
+	err = hci_register_dev(hdev);
+	if (err < 0) {
+		dev_err(&serdev->dev, "Can't register HCI device\n");
+		goto err_regulator_disable;
+	}
+
+	return 0;
+
+err_regulator_disable:
+	if (btmtkuart_is_standalone(bdev))
+		regulator_disable(bdev->vcc);
+err_clk_disable_unprepare:
+	if (btmtkuart_is_standalone(bdev))
+		clk_disable_unprepare(bdev->osc);
+err_hci_free_dev:
+	hci_free_dev(hdev);
+
+	return err;
+}
+
+static void btmtkuart_remove(struct serdev_device *serdev)
+{
+	struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
+	struct hci_dev *hdev = bdev->hdev;
+
+	if (btmtkuart_is_standalone(bdev)) {
+		regulator_disable(bdev->vcc);
+		clk_disable_unprepare(bdev->osc);
+	}
+
+	hci_unregister_dev(hdev);
+	hci_free_dev(hdev);
+}
+
+static const struct btmtkuart_data mt7622_data = {
+	.fwname = FIRMWARE_MT7622,
+};
+
+static const struct btmtkuart_data mt7663_data = {
+	.flags = BTMTKUART_FLAG_STANDALONE_HW,
+	.fwname = FIRMWARE_MT7663,
+};
+
+static const struct btmtkuart_data mt7668_data = {
+	.flags = BTMTKUART_FLAG_STANDALONE_HW,
+	.fwname = FIRMWARE_MT7668,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id mtk_of_match_table[] = {
+	{ .compatible = "mediatek,mt7622-bluetooth", .data = &mt7622_data},
+	{ .compatible = "mediatek,mt7663u-bluetooth", .data = &mt7663_data},
+	{ .compatible = "mediatek,mt7668u-bluetooth", .data = &mt7668_data},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mtk_of_match_table);
+#endif
+
+static struct serdev_device_driver btmtkuart_driver = {
+	.probe = btmtkuart_probe,
+	.remove = btmtkuart_remove,
+	.driver = {
+		.name = "btmtkuart",
+		.of_match_table = of_match_ptr(mtk_of_match_table),
+	},
+};
+
+module_serdev_device_driver(btmtkuart_driver);
+
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek Bluetooth Serial driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
new file mode 100644
index 000000000..c9064d34d
--- /dev/null
+++ b/drivers/bluetooth/btqca.c
@@ -0,0 +1,724 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Bluetooth supports for Qualcomm Atheros chips
+ *
+ *  Copyright (c) 2015 The Linux Foundation. All rights reserved.
+ */
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/vmalloc.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btqca.h"
+
+#define VERSION "0.1"
+
+int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
+			 enum qca_btsoc_type soc_type)
+{
+	struct sk_buff *skb;
+	struct edl_event_hdr *edl;
+	char cmd;
+	int err = 0;
+	u8 event_type = HCI_EV_VENDOR;
+	u8 rlen = sizeof(*edl) + sizeof(*ver);
+	u8 rtype = EDL_APP_VER_RES_EVT;
+
+	bt_dev_dbg(hdev, "QCA Version Request");
+
+	/* Unlike other SoC's sending version command response as payload to
+	 * VSE event. WCN3991 sends version command response as a payload to
+	 * command complete event.
+	 */
+	if (soc_type >= QCA_WCN3991) {
+		event_type = 0;
+		rlen += 1;
+		rtype = EDL_PATCH_VER_REQ_CMD;
+	}
+
+	cmd = EDL_PATCH_VER_REQ_CMD;
+	skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
+				&cmd, event_type, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Reading QCA version information failed (%d)",
+			   err);
+		return err;
+	}
+
+	if (skb->len != rlen) {
+		bt_dev_err(hdev, "QCA Version size mismatch len %d", skb->len);
+		err = -EILSEQ;
+		goto out;
+	}
+
+	edl = (struct edl_event_hdr *)(skb->data);
+	if (!edl) {
+		bt_dev_err(hdev, "QCA TLV with no header");
+		err = -EILSEQ;
+		goto out;
+	}
+
+	if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
+	    edl->rtype != rtype) {
+		bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
+			   edl->rtype);
+		err = -EIO;
+		goto out;
+	}
+
+	if (soc_type >= QCA_WCN3991)
+		memcpy(ver, edl->data + 1, sizeof(*ver));
+	else
+		memcpy(ver, &edl->data, sizeof(*ver));
+
+	bt_dev_info(hdev, "QCA Product ID   :0x%08x",
+		    le32_to_cpu(ver->product_id));
+	bt_dev_info(hdev, "QCA SOC Version  :0x%08x",
+		    le32_to_cpu(ver->soc_id));
+	bt_dev_info(hdev, "QCA ROM Version  :0x%08x",
+		    le16_to_cpu(ver->rom_ver));
+	bt_dev_info(hdev, "QCA Patch Version:0x%08x",
+		    le16_to_cpu(ver->patch_ver));
+
+	if (ver->soc_id == 0 || ver->rom_ver == 0)
+		err = -EILSEQ;
+
+out:
+	kfree_skb(skb);
+	if (err)
+		bt_dev_err(hdev, "QCA Failed to get version (%d)", err);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(qca_read_soc_version);
+
+static int qca_read_fw_build_info(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	struct edl_event_hdr *edl;
+	char cmd, build_label[QCA_FW_BUILD_VER_LEN];
+	int build_lbl_len, err = 0;
+
+	bt_dev_dbg(hdev, "QCA read fw build info");
+
+	cmd = EDL_GET_BUILD_INFO_CMD;
+	skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN,
+				&cmd, 0, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Reading QCA fw build info failed (%d)",
+			   err);
+		return err;
+	}
+
+	edl = (struct edl_event_hdr *)(skb->data);
+	if (!edl) {
+		bt_dev_err(hdev, "QCA read fw build info with no header");
+		err = -EILSEQ;
+		goto out;
+	}
+
+	if (edl->cresp != EDL_CMD_REQ_RES_EVT ||
+	    edl->rtype != EDL_GET_BUILD_INFO_CMD) {
+		bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
+			   edl->rtype);
+		err = -EIO;
+		goto out;
+	}
+
+	build_lbl_len = edl->data[0];
+	if (build_lbl_len <= QCA_FW_BUILD_VER_LEN - 1) {
+		memcpy(build_label, edl->data + 1, build_lbl_len);
+		*(build_label + build_lbl_len) = '\0';
+	}
+
+	hci_set_fw_info(hdev, "%s", build_label);
+
+out:
+	kfree_skb(skb);
+	return err;
+}
+
+static int qca_send_patch_config_cmd(struct hci_dev *hdev)
+{
+	const u8 cmd[] = { EDL_PATCH_CONFIG_CMD, 0x01, 0, 0, 0 };
+	struct sk_buff *skb;
+	struct edl_event_hdr *edl;
+	int err;
+
+	bt_dev_dbg(hdev, "QCA Patch config");
+
+	skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, sizeof(cmd),
+				cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Sending QCA Patch config failed (%d)", err);
+		return err;
+	}
+
+	if (skb->len != 2) {
+		bt_dev_err(hdev, "QCA Patch config cmd size mismatch len %d", skb->len);
+		err = -EILSEQ;
+		goto out;
+	}
+
+	edl = (struct edl_event_hdr *)(skb->data);
+	if (!edl) {
+		bt_dev_err(hdev, "QCA Patch config with no header");
+		err = -EILSEQ;
+		goto out;
+	}
+
+	if (edl->cresp != EDL_PATCH_CONFIG_RES_EVT || edl->rtype != EDL_PATCH_CONFIG_CMD) {
+		bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
+			   edl->rtype);
+		err = -EIO;
+		goto out;
+	}
+
+	err = 0;
+
+out:
+	kfree_skb(skb);
+	return err;
+}
+
+static int qca_send_reset(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	int err;
+
+	bt_dev_dbg(hdev, "QCA HCI_RESET");
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "QCA Reset failed (%d)", err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
+int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	int err;
+
+	bt_dev_dbg(hdev, "QCA pre shutdown cmd");
+
+	skb = __hci_cmd_sync_ev(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
+				NULL, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
+
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "QCA preshutdown_cmd failed (%d)", err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
+
+static void qca_tlv_check_data(struct hci_dev *hdev,
+			       struct qca_fw_config *config,
+		u8 *fw_data, enum qca_btsoc_type soc_type)
+{
+	const u8 *data;
+	u32 type_len;
+	u16 tag_id, tag_len;
+	int idx, length;
+	struct tlv_type_hdr *tlv;
+	struct tlv_type_patch *tlv_patch;
+	struct tlv_type_nvm *tlv_nvm;
+	uint8_t nvm_baud_rate = config->user_baud_rate;
+
+	config->dnld_mode = QCA_SKIP_EVT_NONE;
+	config->dnld_type = QCA_SKIP_EVT_NONE;
+
+	switch (config->type) {
+	case ELF_TYPE_PATCH:
+		config->dnld_mode = QCA_SKIP_EVT_VSE_CC;
+		config->dnld_type = QCA_SKIP_EVT_VSE_CC;
+
+		bt_dev_dbg(hdev, "File Class        : 0x%x", fw_data[4]);
+		bt_dev_dbg(hdev, "Data Encoding     : 0x%x", fw_data[5]);
+		bt_dev_dbg(hdev, "File version      : 0x%x", fw_data[6]);
+		break;
+	case TLV_TYPE_PATCH:
+		tlv = (struct tlv_type_hdr *)fw_data;
+		type_len = le32_to_cpu(tlv->type_len);
+		tlv_patch = (struct tlv_type_patch *)tlv->data;
+
+		/* For Rome version 1.1 to 3.1, all segment commands
+		 * are acked by a vendor specific event (VSE).
+		 * For Rome >= 3.2, the download mode field indicates
+		 * if VSE is skipped by the controller.
+		 * In case VSE is skipped, only the last segment is acked.
+		 */
+		config->dnld_mode = tlv_patch->download_mode;
+		config->dnld_type = config->dnld_mode;
+
+		BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
+		BT_DBG("Total Length           : %d bytes",
+		       le32_to_cpu(tlv_patch->total_size));
+		BT_DBG("Patch Data Length      : %d bytes",
+		       le32_to_cpu(tlv_patch->data_length));
+		BT_DBG("Signing Format Version : 0x%x",
+		       tlv_patch->format_version);
+		BT_DBG("Signature Algorithm    : 0x%x",
+		       tlv_patch->signature);
+		BT_DBG("Download mode          : 0x%x",
+		       tlv_patch->download_mode);
+		BT_DBG("Reserved               : 0x%x",
+		       tlv_patch->reserved1);
+		BT_DBG("Product ID             : 0x%04x",
+		       le16_to_cpu(tlv_patch->product_id));
+		BT_DBG("Rom Build Version      : 0x%04x",
+		       le16_to_cpu(tlv_patch->rom_build));
+		BT_DBG("Patch Version          : 0x%04x",
+		       le16_to_cpu(tlv_patch->patch_version));
+		BT_DBG("Reserved               : 0x%x",
+		       le16_to_cpu(tlv_patch->reserved2));
+		BT_DBG("Patch Entry Address    : 0x%x",
+		       le32_to_cpu(tlv_patch->entry));
+		break;
+
+	case TLV_TYPE_NVM:
+		tlv = (struct tlv_type_hdr *)fw_data;
+
+		type_len = le32_to_cpu(tlv->type_len);
+		length = (type_len >> 8) & 0x00ffffff;
+
+		BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
+		BT_DBG("Length\t\t : %d bytes", length);
+
+		idx = 0;
+		data = tlv->data;
+		while (idx < length) {
+			tlv_nvm = (struct tlv_type_nvm *)(data + idx);
+
+			tag_id = le16_to_cpu(tlv_nvm->tag_id);
+			tag_len = le16_to_cpu(tlv_nvm->tag_len);
+
+			/* Update NVM tags as needed */
+			switch (tag_id) {
+			case EDL_TAG_ID_HCI:
+				/* HCI transport layer parameters
+				 * enabling software inband sleep
+				 * onto controller side.
+				 */
+				tlv_nvm->data[0] |= 0x80;
+
+				/* UART Baud Rate */
+				if (soc_type >= QCA_WCN3991)
+					tlv_nvm->data[1] = nvm_baud_rate;
+				else
+					tlv_nvm->data[2] = nvm_baud_rate;
+
+				break;
+
+			case EDL_TAG_ID_DEEP_SLEEP:
+				/* Sleep enable mask
+				 * enabling deep sleep feature on controller.
+				 */
+				tlv_nvm->data[0] |= 0x01;
+
+				break;
+			}
+
+			idx += (sizeof(u16) + sizeof(u16) + 8 + tag_len);
+		}
+		break;
+
+	default:
+		BT_ERR("Unknown TLV type %d", config->type);
+		break;
+	}
+}
+
+static int qca_tlv_send_segment(struct hci_dev *hdev, int seg_size,
+				const u8 *data, enum qca_tlv_dnld_mode mode,
+				enum qca_btsoc_type soc_type)
+{
+	struct sk_buff *skb;
+	struct edl_event_hdr *edl;
+	struct tlv_seg_resp *tlv_resp;
+	u8 cmd[MAX_SIZE_PER_TLV_SEGMENT + 2];
+	int err = 0;
+	u8 event_type = HCI_EV_VENDOR;
+	u8 rlen = (sizeof(*edl) + sizeof(*tlv_resp));
+	u8 rtype = EDL_TVL_DNLD_RES_EVT;
+
+	cmd[0] = EDL_PATCH_TLV_REQ_CMD;
+	cmd[1] = seg_size;
+	memcpy(cmd + 2, data, seg_size);
+
+	if (mode == QCA_SKIP_EVT_VSE_CC || mode == QCA_SKIP_EVT_VSE)
+		return __hci_cmd_send(hdev, EDL_PATCH_CMD_OPCODE, seg_size + 2,
+				      cmd);
+
+	/* Unlike other SoC's sending version command response as payload to
+	 * VSE event. WCN3991 sends version command response as a payload to
+	 * command complete event.
+	 */
+	if (soc_type >= QCA_WCN3991) {
+		event_type = 0;
+		rlen = sizeof(*edl);
+		rtype = EDL_PATCH_TLV_REQ_CMD;
+	}
+
+	skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, seg_size + 2, cmd,
+				event_type, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "QCA Failed to send TLV segment (%d)", err);
+		return err;
+	}
+
+	if (skb->len != rlen) {
+		bt_dev_err(hdev, "QCA TLV response size mismatch");
+		err = -EILSEQ;
+		goto out;
+	}
+
+	edl = (struct edl_event_hdr *)(skb->data);
+	if (!edl) {
+		bt_dev_err(hdev, "TLV with no header");
+		err = -EILSEQ;
+		goto out;
+	}
+
+	if (edl->cresp != EDL_CMD_REQ_RES_EVT || edl->rtype != rtype) {
+		bt_dev_err(hdev, "QCA TLV with error stat 0x%x rtype 0x%x",
+			   edl->cresp, edl->rtype);
+		err = -EIO;
+	}
+
+	if (soc_type >= QCA_WCN3991)
+		goto out;
+
+	tlv_resp = (struct tlv_seg_resp *)(edl->data);
+	if (tlv_resp->result) {
+		bt_dev_err(hdev, "QCA TLV with error stat 0x%x rtype 0x%x (0x%x)",
+			   edl->cresp, edl->rtype, tlv_resp->result);
+	}
+
+out:
+	kfree_skb(skb);
+
+	return err;
+}
+
+static int qca_inject_cmd_complete_event(struct hci_dev *hdev)
+{
+	struct hci_event_hdr *hdr;
+	struct hci_ev_cmd_complete *evt;
+	struct sk_buff *skb;
+
+	skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	hdr = skb_put(skb, sizeof(*hdr));
+	hdr->evt = HCI_EV_CMD_COMPLETE;
+	hdr->plen = sizeof(*evt) + 1;
+
+	evt = skb_put(skb, sizeof(*evt));
+	evt->ncmd = 1;
+	evt->opcode = cpu_to_le16(QCA_HCI_CC_OPCODE);
+
+	skb_put_u8(skb, QCA_HCI_CC_SUCCESS);
+
+	hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
+
+	return hci_recv_frame(hdev, skb);
+}
+
+static int qca_download_firmware(struct hci_dev *hdev,
+				 struct qca_fw_config *config,
+				 enum qca_btsoc_type soc_type,
+				 u8 rom_ver)
+{
+	const struct firmware *fw;
+	u8 *data;
+	const u8 *segment;
+	int ret, size, remain, i = 0;
+
+	bt_dev_info(hdev, "QCA Downloading %s", config->fwname);
+
+	ret = request_firmware(&fw, config->fwname, &hdev->dev);
+	if (ret) {
+		/* For WCN6750, if mbn file is not present then check for
+		 * tlv file.
+		 */
+		if (soc_type == QCA_WCN6750 && config->type == ELF_TYPE_PATCH) {
+			bt_dev_dbg(hdev, "QCA Failed to request file: %s (%d)",
+				   config->fwname, ret);
+			config->type = TLV_TYPE_PATCH;
+			snprintf(config->fwname, sizeof(config->fwname),
+				 "qca/msbtfw%02x.tlv", rom_ver);
+			bt_dev_info(hdev, "QCA Downloading %s", config->fwname);
+			ret = request_firmware(&fw, config->fwname, &hdev->dev);
+			if (ret) {
+				bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",
+					   config->fwname, ret);
+				return ret;
+			}
+		} else {
+			bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",
+				   config->fwname, ret);
+			return ret;
+		}
+	}
+
+	size = fw->size;
+	data = vmalloc(fw->size);
+	if (!data) {
+		bt_dev_err(hdev, "QCA Failed to allocate memory for file: %s",
+			   config->fwname);
+		release_firmware(fw);
+		return -ENOMEM;
+	}
+
+	memcpy(data, fw->data, size);
+	release_firmware(fw);
+
+	qca_tlv_check_data(hdev, config, data, soc_type);
+
+	segment = data;
+	remain = size;
+	while (remain > 0) {
+		int segsize = min(MAX_SIZE_PER_TLV_SEGMENT, remain);
+
+		bt_dev_dbg(hdev, "Send segment %d, size %d", i++, segsize);
+
+		remain -= segsize;
+		/* The last segment is always acked regardless download mode */
+		if (!remain || segsize < MAX_SIZE_PER_TLV_SEGMENT)
+			config->dnld_mode = QCA_SKIP_EVT_NONE;
+
+		ret = qca_tlv_send_segment(hdev, segsize, segment,
+					   config->dnld_mode, soc_type);
+		if (ret)
+			goto out;
+
+		segment += segsize;
+	}
+
+	/* Latest qualcomm chipsets are not sending a command complete event
+	 * for every fw packet sent. They only respond with a vendor specific
+	 * event for the last packet. This optimization in the chip will
+	 * decrease the BT in initialization time. Here we will inject a command
+	 * complete event to avoid a command timeout error message.
+	 */
+	if (config->dnld_type == QCA_SKIP_EVT_VSE_CC ||
+	    config->dnld_type == QCA_SKIP_EVT_VSE)
+		ret = qca_inject_cmd_complete_event(hdev);
+
+out:
+	vfree(data);
+
+	return ret;
+}
+
+static int qca_disable_soc_logging(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	u8 cmd[2];
+	int err;
+
+	cmd[0] = QCA_DISABLE_LOGGING_SUB_OP;
+	cmd[1] = 0x00;
+	skb = __hci_cmd_sync_ev(hdev, QCA_DISABLE_LOGGING, sizeof(cmd), cmd,
+				HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "QCA Failed to disable soc logging(%d)", err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
+int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	u8 cmd[9];
+	int err;
+
+	cmd[0] = EDL_NVM_ACCESS_SET_REQ_CMD;
+	cmd[1] = 0x02; 			/* TAG ID */
+	cmd[2] = sizeof(bdaddr_t);	/* size */
+	memcpy(cmd + 3, bdaddr, sizeof(bdaddr_t));
+	skb = __hci_cmd_sync_ev(hdev, EDL_NVM_ACCESS_OPCODE, sizeof(cmd), cmd,
+				HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "QCA Change address command failed (%d)", err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
+
+int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
+		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
+		   const char *firmware_name)
+{
+	struct qca_fw_config config;
+	int err;
+	u8 rom_ver = 0;
+	u32 soc_ver;
+
+	bt_dev_dbg(hdev, "QCA setup on UART");
+
+	soc_ver = get_soc_ver(ver.soc_id, ver.rom_ver);
+
+	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
+
+	config.user_baud_rate = baudrate;
+
+	/* Firmware files to download are based on ROM version.
+	 * ROM version is derived from last two bytes of soc_ver.
+	 */
+	rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
+
+	if (soc_type == QCA_WCN6750)
+		qca_send_patch_config_cmd(hdev);
+
+	/* Download rampatch file */
+	config.type = TLV_TYPE_PATCH;
+	if (qca_is_wcn399x(soc_type)) {
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/crbtfw%02x.tlv", rom_ver);
+	} else if (soc_type == QCA_QCA6390) {
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/htbtfw%02x.tlv", rom_ver);
+	} else if (soc_type == QCA_WCN6750) {
+		/* Choose mbn file by default.If mbn file is not found
+		 * then choose tlv file
+		 */
+		config.type = ELF_TYPE_PATCH;
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/msbtfw%02x.mbn", rom_ver);
+	} else {
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/rampatch_%08x.bin", soc_ver);
+	}
+
+	err = qca_download_firmware(hdev, &config, soc_type, rom_ver);
+	if (err < 0) {
+		bt_dev_err(hdev, "QCA Failed to download patch (%d)", err);
+		return err;
+	}
+
+	/* Give the controller some time to get ready to receive the NVM */
+	msleep(10);
+
+	/* Download NVM configuration */
+	config.type = TLV_TYPE_NVM;
+	if (firmware_name)
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/%s", firmware_name);
+	else if (qca_is_wcn399x(soc_type)) {
+		if (ver.soc_id == QCA_WCN3991_SOC_ID) {
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/crnv%02xu.bin", rom_ver);
+		} else {
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/crnv%02x.bin", rom_ver);
+		}
+	}
+	else if (soc_type == QCA_QCA6390)
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/htnv%02x.bin", rom_ver);
+	else if (soc_type == QCA_WCN6750)
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/msnv%02x.bin", rom_ver);
+	else
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/nvm_%08x.bin", soc_ver);
+
+	err = qca_download_firmware(hdev, &config, soc_type, rom_ver);
+	if (err < 0) {
+		bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err);
+		return err;
+	}
+
+	if (soc_type >= QCA_WCN3991) {
+		err = qca_disable_soc_logging(hdev);
+		if (err < 0)
+			return err;
+	}
+
+	/* WCN399x and WCN6750 supports the Microsoft vendor extension with 0xFD70 as the
+	 * VsMsftOpCode.
+	 */
+	switch (soc_type) {
+	case QCA_WCN3990:
+	case QCA_WCN3991:
+	case QCA_WCN3998:
+	case QCA_WCN6750:
+		hci_set_msft_opcode(hdev, 0xFD70);
+		break;
+	default:
+		break;
+	}
+
+	/* Perform HCI reset */
+	err = qca_send_reset(hdev);
+	if (err < 0) {
+		bt_dev_err(hdev, "QCA Failed to run HCI_RESET (%d)", err);
+		return err;
+	}
+
+	if (soc_type == QCA_WCN3991 || soc_type == QCA_WCN6750) {
+		/* get fw build info */
+		err = qca_read_fw_build_info(hdev);
+		if (err < 0)
+			return err;
+	}
+
+	bt_dev_info(hdev, "QCA setup on UART is completed");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca_uart_setup);
+
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, 6, bdaddr,
+				HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca_set_bdaddr);
+
+
+MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
+MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
new file mode 100644
index 000000000..61e9a50e6
--- /dev/null
+++ b/drivers/bluetooth/btqca.h
@@ -0,0 +1,213 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  Bluetooth supports for Qualcomm Atheros ROME chips
+ *
+ *  Copyright (c) 2015 The Linux Foundation. All rights reserved.
+ */
+
+#define EDL_PATCH_CMD_OPCODE		(0xFC00)
+#define EDL_NVM_ACCESS_OPCODE		(0xFC0B)
+#define EDL_WRITE_BD_ADDR_OPCODE	(0xFC14)
+#define EDL_PATCH_CMD_LEN		(1)
+#define EDL_PATCH_VER_REQ_CMD		(0x19)
+#define EDL_PATCH_TLV_REQ_CMD		(0x1E)
+#define EDL_GET_BUILD_INFO_CMD		(0x20)
+#define EDL_NVM_ACCESS_SET_REQ_CMD	(0x01)
+#define EDL_PATCH_CONFIG_CMD		(0x28)
+#define MAX_SIZE_PER_TLV_SEGMENT	(243)
+#define QCA_PRE_SHUTDOWN_CMD		(0xFC08)
+#define QCA_DISABLE_LOGGING		(0xFC17)
+
+#define EDL_CMD_REQ_RES_EVT		(0x00)
+#define EDL_PATCH_VER_RES_EVT		(0x19)
+#define EDL_APP_VER_RES_EVT		(0x02)
+#define EDL_TVL_DNLD_RES_EVT		(0x04)
+#define EDL_CMD_EXE_STATUS_EVT		(0x00)
+#define EDL_SET_BAUDRATE_RSP_EVT	(0x92)
+#define EDL_NVM_ACCESS_CODE_EVT		(0x0B)
+#define EDL_PATCH_CONFIG_RES_EVT	(0x00)
+#define QCA_DISABLE_LOGGING_SUB_OP	(0x14)
+
+#define EDL_TAG_ID_HCI			(17)
+#define EDL_TAG_ID_DEEP_SLEEP		(27)
+
+#define QCA_WCN3990_POWERON_PULSE	0xFC
+#define QCA_WCN3990_POWEROFF_PULSE	0xC0
+
+#define QCA_HCI_CC_OPCODE		0xFC00
+#define QCA_HCI_CC_SUCCESS		0x00
+
+#define QCA_WCN3991_SOC_ID		(0x40014320)
+
+/* QCA chipset version can be decided by patch and SoC
+ * version, combination with upper 2 bytes from SoC
+ * and lower 2 bytes from patch will be used.
+ */
+#define get_soc_ver(soc_id, rom_ver)	\
+	((le32_to_cpu(soc_id) << 16) | (le16_to_cpu(rom_ver)))
+
+#define QCA_FW_BUILD_VER_LEN		255
+
+
+enum qca_baudrate {
+	QCA_BAUDRATE_115200 	= 0,
+	QCA_BAUDRATE_57600,
+	QCA_BAUDRATE_38400,
+	QCA_BAUDRATE_19200,
+	QCA_BAUDRATE_9600,
+	QCA_BAUDRATE_230400,
+	QCA_BAUDRATE_250000,
+	QCA_BAUDRATE_460800,
+	QCA_BAUDRATE_500000,
+	QCA_BAUDRATE_720000,
+	QCA_BAUDRATE_921600,
+	QCA_BAUDRATE_1000000,
+	QCA_BAUDRATE_1250000,
+	QCA_BAUDRATE_2000000,
+	QCA_BAUDRATE_3000000,
+	QCA_BAUDRATE_4000000,
+	QCA_BAUDRATE_1600000,
+	QCA_BAUDRATE_3200000,
+	QCA_BAUDRATE_3500000,
+	QCA_BAUDRATE_AUTO 	= 0xFE,
+	QCA_BAUDRATE_RESERVED
+};
+
+enum qca_tlv_dnld_mode {
+	QCA_SKIP_EVT_NONE,
+	QCA_SKIP_EVT_VSE,
+	QCA_SKIP_EVT_CC,
+	QCA_SKIP_EVT_VSE_CC
+};
+
+enum qca_tlv_type {
+	TLV_TYPE_PATCH = 1,
+	TLV_TYPE_NVM,
+	ELF_TYPE_PATCH,
+};
+
+struct qca_fw_config {
+	u8 type;
+	char fwname[64];
+	uint8_t user_baud_rate;
+	enum qca_tlv_dnld_mode dnld_mode;
+	enum qca_tlv_dnld_mode dnld_type;
+};
+
+struct edl_event_hdr {
+	__u8 cresp;
+	__u8 rtype;
+	__u8 data[];
+} __packed;
+
+struct qca_btsoc_version {
+	__le32 product_id;
+	__le16 patch_ver;
+	__le16 rom_ver;
+	__le32 soc_id;
+} __packed;
+
+struct tlv_seg_resp {
+	__u8 result;
+} __packed;
+
+struct tlv_type_patch {
+	__le32 total_size;
+	__le32 data_length;
+	__u8   format_version;
+	__u8   signature;
+	__u8   download_mode;
+	__u8   reserved1;
+	__le16 product_id;
+	__le16 rom_build;
+	__le16 patch_version;
+	__le16 reserved2;
+	__le32 entry;
+} __packed;
+
+struct tlv_type_nvm {
+	__le16 tag_id;
+	__le16 tag_len;
+	__le32 reserve1;
+	__le32 reserve2;
+	__u8   data[];
+} __packed;
+
+struct tlv_type_hdr {
+	__le32 type_len;
+	__u8   data[];
+} __packed;
+
+enum qca_btsoc_type {
+	QCA_INVALID = -1,
+	QCA_AR3002,
+	QCA_ROME,
+	QCA_WCN3990,
+	QCA_WCN3998,
+	QCA_WCN3991,
+	QCA_QCA6390,
+	QCA_WCN6750,
+};
+
+#if IS_ENABLED(CONFIG_BT_QCA)
+
+int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
+		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
+		   const char *firmware_name);
+int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
+			 enum qca_btsoc_type);
+int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
+static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
+{
+	return soc_type == QCA_WCN3990 || soc_type == QCA_WCN3991 ||
+	       soc_type == QCA_WCN3998;
+}
+static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
+{
+	return soc_type == QCA_WCN6750;
+}
+
+#else
+
+static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
+				 enum qca_btsoc_type soc_type,
+				 struct qca_btsoc_version ver,
+				 const char *firmware_name)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int qca_read_soc_version(struct hci_dev *hdev,
+				       struct qca_btsoc_version *ver,
+				       enum qca_btsoc_type)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
+{
+	return false;
+}
+
+static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
+{
+	return false;
+}
+
+static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
+#endif
diff --git a/drivers/bluetooth/btqcomsmd.c b/drivers/bluetooth/btqcomsmd.c
new file mode 100644
index 000000000..11c7e04bf
--- /dev/null
+++ b/drivers/bluetooth/btqcomsmd.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016, Linaro Ltd.
+ * Copyright (c) 2015, Sony Mobile Communications Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/rpmsg.h>
+#include <linux/of.h>
+
+#include <linux/soc/qcom/wcnss_ctrl.h>
+#include <linux/platform_device.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btqca.h"
+
+struct btqcomsmd {
+	struct hci_dev *hdev;
+
+	struct rpmsg_endpoint *acl_channel;
+	struct rpmsg_endpoint *cmd_channel;
+};
+
+static int btqcomsmd_recv(struct hci_dev *hdev, unsigned int type,
+			   const void *data, size_t count)
+{
+	struct sk_buff *skb;
+
+	/* Use GFP_ATOMIC as we're in IRQ context */
+	skb = bt_skb_alloc(count, GFP_ATOMIC);
+	if (!skb) {
+		hdev->stat.err_rx++;
+		return -ENOMEM;
+	}
+
+	hci_skb_pkt_type(skb) = type;
+	skb_put_data(skb, data, count);
+
+	return hci_recv_frame(hdev, skb);
+}
+
+static int btqcomsmd_acl_callback(struct rpmsg_device *rpdev, void *data,
+				  int count, void *priv, u32 addr)
+{
+	struct btqcomsmd *btq = priv;
+
+	btq->hdev->stat.byte_rx += count;
+	return btqcomsmd_recv(btq->hdev, HCI_ACLDATA_PKT, data, count);
+}
+
+static int btqcomsmd_cmd_callback(struct rpmsg_device *rpdev, void *data,
+				  int count, void *priv, u32 addr)
+{
+	struct btqcomsmd *btq = priv;
+
+	btq->hdev->stat.byte_rx += count;
+	return btqcomsmd_recv(btq->hdev, HCI_EVENT_PKT, data, count);
+}
+
+static int btqcomsmd_send(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btqcomsmd *btq = hci_get_drvdata(hdev);
+	int ret;
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_ACLDATA_PKT:
+		ret = rpmsg_send(btq->acl_channel, skb->data, skb->len);
+		if (ret) {
+			hdev->stat.err_tx++;
+			break;
+		}
+		hdev->stat.acl_tx++;
+		hdev->stat.byte_tx += skb->len;
+		break;
+	case HCI_COMMAND_PKT:
+		ret = rpmsg_send(btq->cmd_channel, skb->data, skb->len);
+		if (ret) {
+			hdev->stat.err_tx++;
+			break;
+		}
+		hdev->stat.cmd_tx++;
+		hdev->stat.byte_tx += skb->len;
+		break;
+	default:
+		ret = -EILSEQ;
+		break;
+	}
+
+	if (!ret)
+		kfree_skb(skb);
+
+	return ret;
+}
+
+static int btqcomsmd_open(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int btqcomsmd_close(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int btqcomsmd_setup(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+	kfree_skb(skb);
+
+	/* Devices do not have persistent storage for BD address. Retrieve
+	 * it from the firmware node property.
+	 */
+	set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
+
+	return 0;
+}
+
+static int btqcomsmd_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	int ret;
+
+	ret = qca_set_bdaddr_rome(hdev, bdaddr);
+	if (ret)
+		return ret;
+
+	/* The firmware stops responding for a while after setting the bdaddr,
+	 * causing timeouts for subsequent commands. Sleep a bit to avoid this.
+	 */
+	usleep_range(1000, 10000);
+	return 0;
+}
+
+static int btqcomsmd_probe(struct platform_device *pdev)
+{
+	struct btqcomsmd *btq;
+	struct hci_dev *hdev;
+	void *wcnss;
+	int ret;
+
+	btq = devm_kzalloc(&pdev->dev, sizeof(*btq), GFP_KERNEL);
+	if (!btq)
+		return -ENOMEM;
+
+	wcnss = dev_get_drvdata(pdev->dev.parent);
+
+	btq->acl_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_ACL",
+						   btqcomsmd_acl_callback, btq);
+	if (IS_ERR(btq->acl_channel))
+		return PTR_ERR(btq->acl_channel);
+
+	btq->cmd_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_CMD",
+						   btqcomsmd_cmd_callback, btq);
+	if (IS_ERR(btq->cmd_channel)) {
+		ret = PTR_ERR(btq->cmd_channel);
+		goto destroy_acl_channel;
+	}
+
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		ret = -ENOMEM;
+		goto destroy_cmd_channel;
+	}
+
+	hci_set_drvdata(hdev, btq);
+	btq->hdev = hdev;
+	SET_HCIDEV_DEV(hdev, &pdev->dev);
+
+	hdev->bus = HCI_SMD;
+	hdev->open = btqcomsmd_open;
+	hdev->close = btqcomsmd_close;
+	hdev->send = btqcomsmd_send;
+	hdev->setup = btqcomsmd_setup;
+	hdev->set_bdaddr = btqcomsmd_set_bdaddr;
+
+	ret = hci_register_dev(hdev);
+	if (ret < 0)
+		goto hci_free_dev;
+
+	platform_set_drvdata(pdev, btq);
+
+	return 0;
+
+hci_free_dev:
+	hci_free_dev(hdev);
+destroy_cmd_channel:
+	rpmsg_destroy_ept(btq->cmd_channel);
+destroy_acl_channel:
+	rpmsg_destroy_ept(btq->acl_channel);
+
+	return ret;
+}
+
+static int btqcomsmd_remove(struct platform_device *pdev)
+{
+	struct btqcomsmd *btq = platform_get_drvdata(pdev);
+
+	hci_unregister_dev(btq->hdev);
+	hci_free_dev(btq->hdev);
+
+	rpmsg_destroy_ept(btq->cmd_channel);
+	rpmsg_destroy_ept(btq->acl_channel);
+
+	return 0;
+}
+
+static const struct of_device_id btqcomsmd_of_match[] = {
+	{ .compatible = "qcom,wcnss-bt", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, btqcomsmd_of_match);
+
+static struct platform_driver btqcomsmd_driver = {
+	.probe = btqcomsmd_probe,
+	.remove = btqcomsmd_remove,
+	.driver  = {
+		.name  = "btqcomsmd",
+		.of_match_table = btqcomsmd_of_match,
+	},
+};
+
+module_platform_driver(btqcomsmd_driver);
+
+MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
+MODULE_DESCRIPTION("Qualcomm SMD HCI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/bluetooth/btrsi.c b/drivers/bluetooth/btrsi.c
new file mode 100644
index 000000000..634cf8f5e
--- /dev/null
+++ b/drivers/bluetooth/btrsi.c
@@ -0,0 +1,196 @@
+/*
+ * Copyright (c) 2017 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+#include <asm/unaligned.h>
+#include <net/rsi_91x.h>
+
+#define RSI_DMA_ALIGN	8
+#define RSI_FRAME_DESC_SIZE	16
+#define RSI_HEADROOM_FOR_BT_HAL	(RSI_FRAME_DESC_SIZE + RSI_DMA_ALIGN)
+
+struct rsi_hci_adapter {
+	void *priv;
+	struct rsi_proto_ops *proto_ops;
+	struct hci_dev *hdev;
+};
+
+static int rsi_hci_open(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int rsi_hci_close(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int rsi_hci_flush(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int rsi_hci_send_pkt(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct rsi_hci_adapter *h_adapter = hci_get_drvdata(hdev);
+	struct sk_buff *new_skb = NULL;
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+	}
+
+	if (skb_headroom(skb) < RSI_HEADROOM_FOR_BT_HAL) {
+		/* Insufficient skb headroom - allocate a new skb */
+		new_skb = skb_realloc_headroom(skb, RSI_HEADROOM_FOR_BT_HAL);
+		if (unlikely(!new_skb))
+			return -ENOMEM;
+		bt_cb(new_skb)->pkt_type = hci_skb_pkt_type(skb);
+		kfree_skb(skb);
+		skb = new_skb;
+		if (!IS_ALIGNED((unsigned long)skb->data, RSI_DMA_ALIGN)) {
+			u8 *skb_data = skb->data;
+			int skb_len = skb->len;
+
+			skb_push(skb, RSI_DMA_ALIGN);
+			skb_pull(skb, PTR_ALIGN(skb->data,
+						RSI_DMA_ALIGN) - skb->data);
+			memmove(skb->data, skb_data, skb_len);
+			skb_trim(skb, skb_len);
+		}
+	}
+
+	return h_adapter->proto_ops->coex_send_pkt(h_adapter->priv, skb,
+						   RSI_BT_Q);
+}
+
+static int rsi_hci_recv_pkt(void *priv, const u8 *pkt)
+{
+	struct rsi_hci_adapter *h_adapter = priv;
+	struct hci_dev *hdev = h_adapter->hdev;
+	struct sk_buff *skb;
+	int pkt_len = get_unaligned_le16(pkt) & 0x0fff;
+
+	skb = dev_alloc_skb(pkt_len);
+	if (!skb)
+		return -ENOMEM;
+
+	memcpy(skb->data, pkt + RSI_FRAME_DESC_SIZE, pkt_len);
+	skb_put(skb, pkt_len);
+	h_adapter->hdev->stat.byte_rx += skb->len;
+
+	hci_skb_pkt_type(skb) = pkt[14];
+
+	return hci_recv_frame(hdev, skb);
+}
+
+static int rsi_hci_attach(void *priv, struct rsi_proto_ops *ops)
+{
+	struct rsi_hci_adapter *h_adapter = NULL;
+	struct hci_dev *hdev;
+	int err = 0;
+
+	h_adapter = kzalloc(sizeof(*h_adapter), GFP_KERNEL);
+	if (!h_adapter)
+		return -ENOMEM;
+
+	h_adapter->priv = priv;
+	ops->set_bt_context(priv, h_adapter);
+	h_adapter->proto_ops = ops;
+
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Failed to alloc HCI device");
+		goto err;
+	}
+
+	h_adapter->hdev = hdev;
+
+	if (ops->get_host_intf(priv) == RSI_HOST_INTF_SDIO)
+		hdev->bus = HCI_SDIO;
+	else
+		hdev->bus = HCI_USB;
+
+	hci_set_drvdata(hdev, h_adapter);
+	hdev->dev_type = HCI_PRIMARY;
+	hdev->open = rsi_hci_open;
+	hdev->close = rsi_hci_close;
+	hdev->flush = rsi_hci_flush;
+	hdev->send = rsi_hci_send_pkt;
+
+	err = hci_register_dev(hdev);
+	if (err < 0) {
+		BT_ERR("HCI registration failed with errcode %d", err);
+		hci_free_dev(hdev);
+		goto err;
+	}
+
+	return 0;
+err:
+	h_adapter->hdev = NULL;
+	kfree(h_adapter);
+	return -EINVAL;
+}
+
+static void rsi_hci_detach(void *priv)
+{
+	struct rsi_hci_adapter *h_adapter = priv;
+	struct hci_dev *hdev;
+
+	if (!h_adapter)
+		return;
+
+	hdev = h_adapter->hdev;
+	if (hdev) {
+		hci_unregister_dev(hdev);
+		hci_free_dev(hdev);
+		h_adapter->hdev = NULL;
+	}
+
+	kfree(h_adapter);
+}
+
+const struct rsi_mod_ops rsi_bt_ops = {
+	.attach	= rsi_hci_attach,
+	.detach	= rsi_hci_detach,
+	.recv_pkt = rsi_hci_recv_pkt,
+};
+EXPORT_SYMBOL(rsi_bt_ops);
+
+static int rsi_91x_bt_module_init(void)
+{
+	return 0;
+}
+
+static void rsi_91x_bt_module_exit(void)
+{
+	return;
+}
+
+module_init(rsi_91x_bt_module_init);
+module_exit(rsi_91x_bt_module_exit);
+MODULE_AUTHOR("Redpine Signals Inc");
+MODULE_DESCRIPTION("RSI BT driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
new file mode 100644
index 000000000..ead632595
--- /dev/null
+++ b/drivers/bluetooth/btrtl.c
@@ -0,0 +1,1092 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Bluetooth support for Realtek devices
+ *
+ *  Copyright (C) 2015 Endless Mobile, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <asm/unaligned.h>
+#include <linux/usb.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btrtl.h"
+
+#define VERSION "0.1"
+
+#define RTL_CHIP_8723CS_CG	3
+#define RTL_CHIP_8723CS_VF	4
+#define RTL_CHIP_8723CS_XX	5
+#define RTL_EPATCH_SIGNATURE	"Realtech"
+#define RTL_ROM_LMP_8703B	0x8703
+#define RTL_ROM_LMP_8723A	0x1200
+#define RTL_ROM_LMP_8723B	0x8723
+#define RTL_ROM_LMP_8821A	0x8821
+#define RTL_ROM_LMP_8761A	0x8761
+#define RTL_ROM_LMP_8822B	0x8822
+#define RTL_ROM_LMP_8852A	0x8852
+#define RTL_ROM_LMP_8851B	0x8851
+#define RTL_CONFIG_MAGIC	0x8723ab55
+
+#define IC_MATCH_FL_LMPSUBV	(1 << 0)
+#define IC_MATCH_FL_HCIREV	(1 << 1)
+#define IC_MATCH_FL_HCIVER	(1 << 2)
+#define IC_MATCH_FL_HCIBUS	(1 << 3)
+#define IC_MATCH_FL_CHIP_TYPE	(1 << 4)
+#define IC_INFO(lmps, hcir, hciv, bus) \
+	.match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV | \
+		       IC_MATCH_FL_HCIVER | IC_MATCH_FL_HCIBUS, \
+	.lmp_subver = (lmps), \
+	.hci_rev = (hcir), \
+	.hci_ver = (hciv), \
+	.hci_bus = (bus)
+
+enum btrtl_chip_id {
+	CHIP_ID_8723A,
+	CHIP_ID_8723B,
+	CHIP_ID_8821A,
+	CHIP_ID_8761A,
+	CHIP_ID_8822B = 8,
+	CHIP_ID_8723D,
+	CHIP_ID_8821C,
+	CHIP_ID_8822C = 13,
+	CHIP_ID_8761B,
+	CHIP_ID_8852A = 18,
+	CHIP_ID_8852B = 20,
+	CHIP_ID_8852C = 25,
+	CHIP_ID_8851B = 36,
+};
+
+struct id_table {
+	__u16 match_flags;
+	__u16 lmp_subver;
+	__u16 hci_rev;
+	__u8 hci_ver;
+	__u8 hci_bus;
+	__u8 chip_type;
+	bool config_needed;
+	bool has_rom_version;
+	bool has_msft_ext;
+	char *fw_name;
+	char *cfg_name;
+};
+
+struct btrtl_device_info {
+	const struct id_table *ic_info;
+	u8 rom_version;
+	u8 *fw_data;
+	int fw_len;
+	u8 *cfg_data;
+	int cfg_len;
+	bool drop_fw;
+	int project_id;
+};
+
+static const struct id_table ic_id_table[] = {
+	/* 8723A */
+	{ IC_INFO(RTL_ROM_LMP_8723A, 0xb, 0x6, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = false,
+	  .fw_name = "rtl_bt/rtl8723a_fw.bin",
+	  .cfg_name = NULL },
+
+	/* 8723BS */
+	{ IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_UART),
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8723bs_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8723bs_config" },
+
+	/* 8723B */
+	{ IC_INFO(RTL_ROM_LMP_8723B, 0xb, 0x6, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8723b_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8723b_config" },
+
+	/* 8723CS-CG */
+	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_CHIP_TYPE |
+			 IC_MATCH_FL_HCIBUS,
+	  .lmp_subver = RTL_ROM_LMP_8703B,
+	  .chip_type = RTL_CHIP_8723CS_CG,
+	  .hci_bus = HCI_UART,
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8723cs_cg_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8723cs_cg_config" },
+
+	/* 8723CS-VF */
+	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_CHIP_TYPE |
+			 IC_MATCH_FL_HCIBUS,
+	  .lmp_subver = RTL_ROM_LMP_8703B,
+	  .chip_type = RTL_CHIP_8723CS_VF,
+	  .hci_bus = HCI_UART,
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8723cs_vf_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8723cs_vf_config" },
+
+	/* 8723CS-XX */
+	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_CHIP_TYPE |
+			 IC_MATCH_FL_HCIBUS,
+	  .lmp_subver = RTL_ROM_LMP_8703B,
+	  .chip_type = RTL_CHIP_8723CS_XX,
+	  .hci_bus = HCI_UART,
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8723cs_xx_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8723cs_xx_config" },
+
+	/* 8723D */
+	{ IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_USB),
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8723d_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8723d_config" },
+
+	/* 8723DS */
+	{ IC_INFO(RTL_ROM_LMP_8723B, 0xd, 0x8, HCI_UART),
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8723ds_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8723ds_config" },
+
+	/* 8821A */
+	{ IC_INFO(RTL_ROM_LMP_8821A, 0xa, 0x6, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8821a_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8821a_config" },
+
+	/* 8821C */
+	{ IC_INFO(RTL_ROM_LMP_8821A, 0xc, 0x8, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8821c_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8821c_config" },
+
+	/* 8761A */
+	{ IC_INFO(RTL_ROM_LMP_8761A, 0xa, 0x6, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8761a_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8761a_config" },
+
+	/* 8761B */
+	{ IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_UART),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8761b_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8761b_config" },
+
+	/* 8761BU */
+	{ IC_INFO(RTL_ROM_LMP_8761A, 0xb, 0xa, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .fw_name  = "rtl_bt/rtl8761bu_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8761bu_config" },
+
+	/* 8822C with UART interface */
+	{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0x8, HCI_UART),
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8822cs_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8822cs_config" },
+
+	/* 8822C with UART interface */
+	{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART),
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8822cs_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8822cs_config" },
+
+	/* 8822C with USB interface */
+	{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8822cu_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8822cu_config" },
+
+	/* 8822B */
+	{ IC_INFO(RTL_ROM_LMP_8822B, 0xb, 0x7, HCI_USB),
+	  .config_needed = true,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8822b_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8822b_config" },
+
+	/* 8852A */
+	{ IC_INFO(RTL_ROM_LMP_8852A, 0xa, 0xb, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8852au_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8852au_config" },
+
+	/* 8852B */
+	{ IC_INFO(RTL_ROM_LMP_8852A, 0xb, 0xb, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8852bu_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8852bu_config" },
+
+	/* 8852C */
+	{ IC_INFO(RTL_ROM_LMP_8852A, 0xc, 0xc, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .has_msft_ext = true,
+	  .fw_name  = "rtl_bt/rtl8852cu_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8852cu_config" },
+
+	/* 8851B */
+	{ IC_INFO(RTL_ROM_LMP_8851B, 0xb, 0xc, HCI_USB),
+	  .config_needed = false,
+	  .has_rom_version = true,
+	  .has_msft_ext = false,
+	  .fw_name  = "rtl_bt/rtl8851bu_fw.bin",
+	  .cfg_name = "rtl_bt/rtl8851bu_config" },
+	};
+
+static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
+					     u8 hci_ver, u8 hci_bus,
+					     u8 chip_type)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ic_id_table); i++) {
+		if ((ic_id_table[i].match_flags & IC_MATCH_FL_LMPSUBV) &&
+		    (ic_id_table[i].lmp_subver != lmp_subver))
+			continue;
+		if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIREV) &&
+		    (ic_id_table[i].hci_rev != hci_rev))
+			continue;
+		if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIVER) &&
+		    (ic_id_table[i].hci_ver != hci_ver))
+			continue;
+		if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIBUS) &&
+		    (ic_id_table[i].hci_bus != hci_bus))
+			continue;
+		if ((ic_id_table[i].match_flags & IC_MATCH_FL_CHIP_TYPE) &&
+		    (ic_id_table[i].chip_type != chip_type))
+			continue;
+
+		break;
+	}
+	if (i >= ARRAY_SIZE(ic_id_table))
+		return NULL;
+
+	return &ic_id_table[i];
+}
+
+static struct sk_buff *btrtl_read_local_version(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		rtl_dev_err(hdev, "HCI_OP_READ_LOCAL_VERSION failed (%ld)",
+			    PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != sizeof(struct hci_rp_read_local_version)) {
+		rtl_dev_err(hdev, "HCI_OP_READ_LOCAL_VERSION event length mismatch");
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
+static int rtl_read_rom_version(struct hci_dev *hdev, u8 *version)
+{
+	struct rtl_rom_version_evt *rom_version;
+	struct sk_buff *skb;
+
+	/* Read RTL ROM version command */
+	skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		rtl_dev_err(hdev, "Read ROM version failed (%ld)",
+			    PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	if (skb->len != sizeof(*rom_version)) {
+		rtl_dev_err(hdev, "version event length mismatch");
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	rom_version = (struct rtl_rom_version_evt *)skb->data;
+	rtl_dev_info(hdev, "rom_version status=%x version=%x",
+		     rom_version->status, rom_version->version);
+
+	*version = rom_version->version;
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int rtlbt_parse_firmware(struct hci_dev *hdev,
+				struct btrtl_device_info *btrtl_dev,
+				unsigned char **_buf)
+{
+	static const u8 extension_sig[] = { 0x51, 0x04, 0xfd, 0x77 };
+	struct rtl_epatch_header *epatch_info;
+	unsigned char *buf;
+	int i, len;
+	size_t min_size;
+	u8 opcode, length, data;
+	int project_id = -1;
+	const unsigned char *fwptr, *chip_id_base;
+	const unsigned char *patch_length_base, *patch_offset_base;
+	u32 patch_offset = 0;
+	u16 patch_length, num_patches;
+	static const struct {
+		__u16 lmp_subver;
+		__u8 id;
+	} project_id_to_lmp_subver[] = {
+		{ RTL_ROM_LMP_8723A, 0 },
+		{ RTL_ROM_LMP_8723B, 1 },
+		{ RTL_ROM_LMP_8821A, 2 },
+		{ RTL_ROM_LMP_8761A, 3 },
+		{ RTL_ROM_LMP_8703B, 7 },
+		{ RTL_ROM_LMP_8822B, 8 },
+		{ RTL_ROM_LMP_8723B, 9 },	/* 8723D */
+		{ RTL_ROM_LMP_8821A, 10 },	/* 8821C */
+		{ RTL_ROM_LMP_8822B, 13 },	/* 8822C */
+		{ RTL_ROM_LMP_8761A, 14 },	/* 8761B */
+		{ RTL_ROM_LMP_8852A, 18 },	/* 8852A */
+		{ RTL_ROM_LMP_8852A, 20 },	/* 8852B */
+		{ RTL_ROM_LMP_8852A, 25 },	/* 8852C */
+		{ RTL_ROM_LMP_8851B, 36 },	/* 8851B */
+	};
+
+	min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3;
+	if (btrtl_dev->fw_len < min_size)
+		return -EINVAL;
+
+	fwptr = btrtl_dev->fw_data + btrtl_dev->fw_len - sizeof(extension_sig);
+	if (memcmp(fwptr, extension_sig, sizeof(extension_sig)) != 0) {
+		rtl_dev_err(hdev, "extension section signature mismatch");
+		return -EINVAL;
+	}
+
+	/* Loop from the end of the firmware parsing instructions, until
+	 * we find an instruction that identifies the "project ID" for the
+	 * hardware supported by this firwmare file.
+	 * Once we have that, we double-check that project_id is suitable
+	 * for the hardware we are working with.
+	 */
+	while (fwptr >= btrtl_dev->fw_data + (sizeof(*epatch_info) + 3)) {
+		opcode = *--fwptr;
+		length = *--fwptr;
+		data = *--fwptr;
+
+		BT_DBG("check op=%x len=%x data=%x", opcode, length, data);
+
+		if (opcode == 0xff) /* EOF */
+			break;
+
+		if (length == 0) {
+			rtl_dev_err(hdev, "found instruction with length 0");
+			return -EINVAL;
+		}
+
+		if (opcode == 0 && length == 1) {
+			project_id = data;
+			break;
+		}
+
+		fwptr -= length;
+	}
+
+	if (project_id < 0) {
+		rtl_dev_err(hdev, "failed to find version instruction");
+		return -EINVAL;
+	}
+
+	/* Find project_id in table */
+	for (i = 0; i < ARRAY_SIZE(project_id_to_lmp_subver); i++) {
+		if (project_id == project_id_to_lmp_subver[i].id) {
+			btrtl_dev->project_id = project_id;
+			break;
+		}
+	}
+
+	if (i >= ARRAY_SIZE(project_id_to_lmp_subver)) {
+		rtl_dev_err(hdev, "unknown project id %d", project_id);
+		return -EINVAL;
+	}
+
+	if (btrtl_dev->ic_info->lmp_subver !=
+				project_id_to_lmp_subver[i].lmp_subver) {
+		rtl_dev_err(hdev, "firmware is for %x but this is a %x",
+			    project_id_to_lmp_subver[i].lmp_subver,
+			    btrtl_dev->ic_info->lmp_subver);
+		return -EINVAL;
+	}
+
+	epatch_info = (struct rtl_epatch_header *)btrtl_dev->fw_data;
+	if (memcmp(epatch_info->signature, RTL_EPATCH_SIGNATURE, 8) != 0) {
+		rtl_dev_err(hdev, "bad EPATCH signature");
+		return -EINVAL;
+	}
+
+	num_patches = le16_to_cpu(epatch_info->num_patches);
+	BT_DBG("fw_version=%x, num_patches=%d",
+	       le32_to_cpu(epatch_info->fw_version), num_patches);
+
+	/* After the rtl_epatch_header there is a funky patch metadata section.
+	 * Assuming 2 patches, the layout is:
+	 * ChipID1 ChipID2 PatchLength1 PatchLength2 PatchOffset1 PatchOffset2
+	 *
+	 * Find the right patch for this chip.
+	 */
+	min_size += 8 * num_patches;
+	if (btrtl_dev->fw_len < min_size)
+		return -EINVAL;
+
+	chip_id_base = btrtl_dev->fw_data + sizeof(struct rtl_epatch_header);
+	patch_length_base = chip_id_base + (sizeof(u16) * num_patches);
+	patch_offset_base = patch_length_base + (sizeof(u16) * num_patches);
+	for (i = 0; i < num_patches; i++) {
+		u16 chip_id = get_unaligned_le16(chip_id_base +
+						 (i * sizeof(u16)));
+		if (chip_id == btrtl_dev->rom_version + 1) {
+			patch_length = get_unaligned_le16(patch_length_base +
+							  (i * sizeof(u16)));
+			patch_offset = get_unaligned_le32(patch_offset_base +
+							  (i * sizeof(u32)));
+			break;
+		}
+	}
+
+	if (!patch_offset) {
+		rtl_dev_err(hdev, "didn't find patch for chip id %d",
+			    btrtl_dev->rom_version);
+		return -EINVAL;
+	}
+
+	BT_DBG("length=%x offset=%x index %d", patch_length, patch_offset, i);
+	min_size = patch_offset + patch_length;
+	if (btrtl_dev->fw_len < min_size)
+		return -EINVAL;
+
+	/* Copy the firmware into a new buffer and write the version at
+	 * the end.
+	 */
+	len = patch_length;
+	buf = kvmalloc(patch_length, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	memcpy(buf, btrtl_dev->fw_data + patch_offset, patch_length - 4);
+	memcpy(buf + patch_length - 4, &epatch_info->fw_version, 4);
+
+	*_buf = buf;
+	return len;
+}
+
+static int rtl_download_firmware(struct hci_dev *hdev,
+				 const unsigned char *data, int fw_len)
+{
+	struct rtl_download_cmd *dl_cmd;
+	int frag_num = fw_len / RTL_FRAG_LEN + 1;
+	int frag_len = RTL_FRAG_LEN;
+	int ret = 0;
+	int i;
+	struct sk_buff *skb;
+	struct hci_rp_read_local_version *rp;
+
+	dl_cmd = kmalloc(sizeof(struct rtl_download_cmd), GFP_KERNEL);
+	if (!dl_cmd)
+		return -ENOMEM;
+
+	for (i = 0; i < frag_num; i++) {
+		struct sk_buff *skb;
+
+		BT_DBG("download fw (%d/%d)", i, frag_num);
+
+		if (i > 0x7f)
+			dl_cmd->index = (i & 0x7f) + 1;
+		else
+			dl_cmd->index = i;
+
+		if (i == (frag_num - 1)) {
+			dl_cmd->index |= 0x80; /* data end */
+			frag_len = fw_len % RTL_FRAG_LEN;
+		}
+		memcpy(dl_cmd->data, data, frag_len);
+
+		/* Send download command */
+		skb = __hci_cmd_sync(hdev, 0xfc20, frag_len + 1, dl_cmd,
+				     HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			rtl_dev_err(hdev, "download fw command failed (%ld)",
+				    PTR_ERR(skb));
+			ret = PTR_ERR(skb);
+			goto out;
+		}
+
+		if (skb->len != sizeof(struct rtl_download_response)) {
+			rtl_dev_err(hdev, "download fw event length mismatch");
+			kfree_skb(skb);
+			ret = -EIO;
+			goto out;
+		}
+
+		kfree_skb(skb);
+		data += RTL_FRAG_LEN;
+	}
+
+	skb = btrtl_read_local_version(hdev);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		rtl_dev_err(hdev, "read local version failed");
+		goto out;
+	}
+
+	rp = (struct hci_rp_read_local_version *)skb->data;
+	rtl_dev_info(hdev, "fw version 0x%04x%04x",
+		     __le16_to_cpu(rp->hci_rev), __le16_to_cpu(rp->lmp_subver));
+	kfree_skb(skb);
+
+out:
+	kfree(dl_cmd);
+	return ret;
+}
+
+static int rtl_load_file(struct hci_dev *hdev, const char *name, u8 **buff)
+{
+	const struct firmware *fw;
+	int ret;
+
+	rtl_dev_info(hdev, "loading %s", name);
+	ret = request_firmware(&fw, name, &hdev->dev);
+	if (ret < 0)
+		return ret;
+	ret = fw->size;
+	*buff = kvmalloc(fw->size, GFP_KERNEL);
+	if (*buff)
+		memcpy(*buff, fw->data, ret);
+	else
+		ret = -ENOMEM;
+
+	release_firmware(fw);
+
+	return ret;
+}
+
+static int btrtl_setup_rtl8723a(struct hci_dev *hdev,
+				struct btrtl_device_info *btrtl_dev)
+{
+	if (btrtl_dev->fw_len < 8)
+		return -EINVAL;
+
+	/* Check that the firmware doesn't have the epatch signature
+	 * (which is only for RTL8723B and newer).
+	 */
+	if (!memcmp(btrtl_dev->fw_data, RTL_EPATCH_SIGNATURE, 8)) {
+		rtl_dev_err(hdev, "unexpected EPATCH signature!");
+		return -EINVAL;
+	}
+
+	return rtl_download_firmware(hdev, btrtl_dev->fw_data,
+				     btrtl_dev->fw_len);
+}
+
+static int btrtl_setup_rtl8723b(struct hci_dev *hdev,
+				struct btrtl_device_info *btrtl_dev)
+{
+	unsigned char *fw_data = NULL;
+	int ret;
+	u8 *tbuff;
+
+	ret = rtlbt_parse_firmware(hdev, btrtl_dev, &fw_data);
+	if (ret < 0)
+		goto out;
+
+	if (btrtl_dev->cfg_len > 0) {
+		tbuff = kvzalloc(ret + btrtl_dev->cfg_len, GFP_KERNEL);
+		if (!tbuff) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		memcpy(tbuff, fw_data, ret);
+		kvfree(fw_data);
+
+		memcpy(tbuff + ret, btrtl_dev->cfg_data, btrtl_dev->cfg_len);
+		ret += btrtl_dev->cfg_len;
+
+		fw_data = tbuff;
+	}
+
+	rtl_dev_info(hdev, "cfg_sz %d, total sz %d", btrtl_dev->cfg_len, ret);
+
+	ret = rtl_download_firmware(hdev, fw_data, ret);
+
+out:
+	kvfree(fw_data);
+	return ret;
+}
+
+static bool rtl_has_chip_type(u16 lmp_subver)
+{
+	switch (lmp_subver) {
+	case RTL_ROM_LMP_8703B:
+		return true;
+	default:
+		break;
+	}
+
+	return  false;
+}
+
+static int rtl_read_chip_type(struct hci_dev *hdev, u8 *type)
+{
+	struct rtl_chip_type_evt *chip_type;
+	struct sk_buff *skb;
+	const unsigned char cmd_buf[] = {0x00, 0x94, 0xa0, 0x00, 0xb0};
+
+	/* Read RTL chip type command */
+	skb = __hci_cmd_sync(hdev, 0xfc61, 5, cmd_buf, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		rtl_dev_err(hdev, "Read chip type failed (%ld)",
+			    PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+
+	chip_type = skb_pull_data(skb, sizeof(*chip_type));
+	if (!chip_type) {
+		rtl_dev_err(hdev, "RTL chip type event length mismatch");
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	rtl_dev_info(hdev, "chip_type status=%x type=%x",
+		     chip_type->status, chip_type->type);
+
+	*type = chip_type->type & 0x0f;
+
+	kfree_skb(skb);
+	return 0;
+}
+
+void btrtl_free(struct btrtl_device_info *btrtl_dev)
+{
+	kvfree(btrtl_dev->fw_data);
+	kvfree(btrtl_dev->cfg_data);
+	kfree(btrtl_dev);
+}
+EXPORT_SYMBOL_GPL(btrtl_free);
+
+struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
+					   const char *postfix)
+{
+	struct btrtl_device_info *btrtl_dev;
+	struct sk_buff *skb;
+	struct hci_rp_read_local_version *resp;
+	char cfg_name[40];
+	u16 hci_rev, lmp_subver;
+	u8 hci_ver, chip_type = 0;
+	int ret;
+	u16 opcode;
+	u8 cmd[2];
+
+	btrtl_dev = kzalloc(sizeof(*btrtl_dev), GFP_KERNEL);
+	if (!btrtl_dev) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	skb = btrtl_read_local_version(hdev);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		goto err_free;
+	}
+
+	resp = (struct hci_rp_read_local_version *)skb->data;
+	rtl_dev_info(hdev, "examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x lmp_subver=%04x",
+		     resp->hci_ver, resp->hci_rev,
+		     resp->lmp_ver, resp->lmp_subver);
+
+	hci_ver = resp->hci_ver;
+	hci_rev = le16_to_cpu(resp->hci_rev);
+	lmp_subver = le16_to_cpu(resp->lmp_subver);
+
+	if (rtl_has_chip_type(lmp_subver)) {
+		ret = rtl_read_chip_type(hdev, &chip_type);
+		if (ret)
+			goto err_free;
+	}
+
+	btrtl_dev->ic_info = btrtl_match_ic(lmp_subver, hci_rev, hci_ver,
+					    hdev->bus, chip_type);
+
+	if (!btrtl_dev->ic_info)
+		btrtl_dev->drop_fw = true;
+
+	if (btrtl_dev->drop_fw) {
+		opcode = hci_opcode_pack(0x3f, 0x66);
+		cmd[0] = opcode & 0xff;
+		cmd[1] = opcode >> 8;
+
+		skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
+		if (!skb)
+			goto out_free;
+
+		skb_put_data(skb, cmd, sizeof(cmd));
+		hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
+
+		hdev->send(hdev, skb);
+
+		/* Ensure the above vendor command is sent to controller and
+		 * process has done.
+		 */
+		msleep(200);
+
+		/* Read the local version again. Expect to have the vanilla
+		 * version as cold boot.
+		 */
+		skb = btrtl_read_local_version(hdev);
+		if (IS_ERR(skb)) {
+			ret = PTR_ERR(skb);
+			goto err_free;
+		}
+
+		resp = (struct hci_rp_read_local_version *)skb->data;
+		rtl_dev_info(hdev, "examining hci_ver=%02x hci_rev=%04x lmp_ver=%02x lmp_subver=%04x",
+			     resp->hci_ver, resp->hci_rev,
+			     resp->lmp_ver, resp->lmp_subver);
+
+		hci_ver = resp->hci_ver;
+		hci_rev = le16_to_cpu(resp->hci_rev);
+		lmp_subver = le16_to_cpu(resp->lmp_subver);
+
+		btrtl_dev->ic_info = btrtl_match_ic(lmp_subver, hci_rev, hci_ver,
+						    hdev->bus, chip_type);
+	}
+out_free:
+	kfree_skb(skb);
+
+	if (!btrtl_dev->ic_info) {
+		rtl_dev_info(hdev, "unknown IC info, lmp subver %04x, hci rev %04x, hci ver %04x",
+			    lmp_subver, hci_rev, hci_ver);
+		return btrtl_dev;
+	}
+
+	if (btrtl_dev->ic_info->has_rom_version) {
+		ret = rtl_read_rom_version(hdev, &btrtl_dev->rom_version);
+		if (ret)
+			goto err_free;
+	}
+
+	btrtl_dev->fw_len = rtl_load_file(hdev, btrtl_dev->ic_info->fw_name,
+					  &btrtl_dev->fw_data);
+	if (btrtl_dev->fw_len < 0) {
+		rtl_dev_err(hdev, "firmware file %s not found",
+			    btrtl_dev->ic_info->fw_name);
+		ret = btrtl_dev->fw_len;
+		goto err_free;
+	}
+
+	if (btrtl_dev->ic_info->cfg_name) {
+		if (postfix) {
+			snprintf(cfg_name, sizeof(cfg_name), "%s-%s.bin",
+				 btrtl_dev->ic_info->cfg_name, postfix);
+		} else {
+			snprintf(cfg_name, sizeof(cfg_name), "%s.bin",
+				 btrtl_dev->ic_info->cfg_name);
+		}
+		btrtl_dev->cfg_len = rtl_load_file(hdev, cfg_name,
+						   &btrtl_dev->cfg_data);
+		if (btrtl_dev->ic_info->config_needed &&
+		    btrtl_dev->cfg_len <= 0) {
+			rtl_dev_err(hdev, "mandatory config file %s not found",
+				    btrtl_dev->ic_info->cfg_name);
+			ret = btrtl_dev->cfg_len;
+			goto err_free;
+		}
+	}
+
+	/* The following chips supports the Microsoft vendor extension,
+	 * therefore set the corresponding VsMsftOpCode.
+	 */
+	if (btrtl_dev->ic_info->has_msft_ext)
+		hci_set_msft_opcode(hdev, 0xFCF0);
+
+	return btrtl_dev;
+
+err_free:
+	btrtl_free(btrtl_dev);
+err_alloc:
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(btrtl_initialize);
+
+int btrtl_download_firmware(struct hci_dev *hdev,
+			    struct btrtl_device_info *btrtl_dev)
+{
+	/* Match a set of subver values that correspond to stock firmware,
+	 * which is not compatible with standard btusb.
+	 * If matched, upload an alternative firmware that does conform to
+	 * standard btusb. Once that firmware is uploaded, the subver changes
+	 * to a different value.
+	 */
+	if (!btrtl_dev->ic_info) {
+		rtl_dev_info(hdev, "assuming no firmware upload needed");
+		return 0;
+	}
+
+	switch (btrtl_dev->ic_info->lmp_subver) {
+	case RTL_ROM_LMP_8723A:
+		return btrtl_setup_rtl8723a(hdev, btrtl_dev);
+	case RTL_ROM_LMP_8723B:
+	case RTL_ROM_LMP_8821A:
+	case RTL_ROM_LMP_8761A:
+	case RTL_ROM_LMP_8822B:
+	case RTL_ROM_LMP_8852A:
+	case RTL_ROM_LMP_8703B:
+	case RTL_ROM_LMP_8851B:
+		return btrtl_setup_rtl8723b(hdev, btrtl_dev);
+	default:
+		rtl_dev_info(hdev, "assuming no firmware upload needed");
+		return 0;
+	}
+}
+EXPORT_SYMBOL_GPL(btrtl_download_firmware);
+
+void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
+{
+	/* Enable controller to do both LE scan and BR/EDR inquiry
+	 * simultaneously.
+	 */
+	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+
+	/* Enable central-peripheral role (able to create new connections with
+	 * an existing connection in slave role).
+	 */
+	/* Enable WBS supported for the specific Realtek devices. */
+	switch (btrtl_dev->project_id) {
+	case CHIP_ID_8822C:
+	case CHIP_ID_8852A:
+	case CHIP_ID_8852B:
+	case CHIP_ID_8852C:
+	case CHIP_ID_8851B:
+		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+		hci_set_aosp_capable(hdev);
+		break;
+	default:
+		rtl_dev_dbg(hdev, "Central-peripheral role not enabled.");
+		rtl_dev_dbg(hdev, "WBS supported not enabled.");
+		break;
+	}
+
+	if (!btrtl_dev->ic_info)
+		return;
+
+	switch (btrtl_dev->ic_info->lmp_subver) {
+	case RTL_ROM_LMP_8703B:
+		/* 8723CS reports two pages for local ext features,
+		 * but it doesn't support any features from page 2 -
+		 * it either responds with garbage or with error status
+		 */
+		set_bit(HCI_QUIRK_BROKEN_LOCAL_EXT_FEATURES_PAGE_2,
+			&hdev->quirks);
+		break;
+	default:
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(btrtl_set_quirks);
+
+int btrtl_setup_realtek(struct hci_dev *hdev)
+{
+	struct btrtl_device_info *btrtl_dev;
+	int ret;
+
+	btrtl_dev = btrtl_initialize(hdev, NULL);
+	if (IS_ERR(btrtl_dev))
+		return PTR_ERR(btrtl_dev);
+
+	ret = btrtl_download_firmware(hdev, btrtl_dev);
+
+	btrtl_set_quirks(hdev, btrtl_dev);
+
+	btrtl_free(btrtl_dev);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(btrtl_setup_realtek);
+
+int btrtl_shutdown_realtek(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	int ret;
+
+	/* According to the vendor driver, BT must be reset on close to avoid
+	 * firmware crash.
+	 */
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		bt_dev_err(hdev, "HCI reset during shutdown failed");
+		return ret;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btrtl_shutdown_realtek);
+
+static unsigned int btrtl_convert_baudrate(u32 device_baudrate)
+{
+	switch (device_baudrate) {
+	case 0x0252a00a:
+		return 230400;
+
+	case 0x05f75004:
+		return 921600;
+
+	case 0x00005004:
+		return 1000000;
+
+	case 0x04928002:
+	case 0x01128002:
+		return 1500000;
+
+	case 0x00005002:
+		return 2000000;
+
+	case 0x0000b001:
+		return 2500000;
+
+	case 0x04928001:
+		return 3000000;
+
+	case 0x052a6001:
+		return 3500000;
+
+	case 0x00005001:
+		return 4000000;
+
+	case 0x0252c014:
+	default:
+		return 115200;
+	}
+}
+
+int btrtl_get_uart_settings(struct hci_dev *hdev,
+			    struct btrtl_device_info *btrtl_dev,
+			    unsigned int *controller_baudrate,
+			    u32 *device_baudrate, bool *flow_control)
+{
+	struct rtl_vendor_config *config;
+	struct rtl_vendor_config_entry *entry;
+	int i, total_data_len;
+	bool found = false;
+
+	total_data_len = btrtl_dev->cfg_len - sizeof(*config);
+	if (total_data_len <= 0) {
+		rtl_dev_warn(hdev, "no config loaded");
+		return -EINVAL;
+	}
+
+	config = (struct rtl_vendor_config *)btrtl_dev->cfg_data;
+	if (le32_to_cpu(config->signature) != RTL_CONFIG_MAGIC) {
+		rtl_dev_err(hdev, "invalid config magic");
+		return -EINVAL;
+	}
+
+	if (total_data_len < le16_to_cpu(config->total_len)) {
+		rtl_dev_err(hdev, "config is too short");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < total_data_len; ) {
+		entry = ((void *)config->entry) + i;
+
+		switch (le16_to_cpu(entry->offset)) {
+		case 0xc:
+			if (entry->len < sizeof(*device_baudrate)) {
+				rtl_dev_err(hdev, "invalid UART config entry");
+				return -EINVAL;
+			}
+
+			*device_baudrate = get_unaligned_le32(entry->data);
+			*controller_baudrate = btrtl_convert_baudrate(
+							*device_baudrate);
+
+			if (entry->len >= 13)
+				*flow_control = !!(entry->data[12] & BIT(2));
+			else
+				*flow_control = false;
+
+			found = true;
+			break;
+
+		default:
+			rtl_dev_dbg(hdev, "skipping config entry 0x%x (len %u)",
+				   le16_to_cpu(entry->offset), entry->len);
+			break;
+		}
+
+		i += sizeof(*entry) + entry->len;
+	}
+
+	if (!found) {
+		rtl_dev_err(hdev, "no UART config entry found");
+		return -ENOENT;
+	}
+
+	rtl_dev_dbg(hdev, "device baudrate = 0x%08x", *device_baudrate);
+	rtl_dev_dbg(hdev, "controller baudrate = %u", *controller_baudrate);
+	rtl_dev_dbg(hdev, "flow control %d", *flow_control);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btrtl_get_uart_settings);
+
+MODULE_AUTHOR("Daniel Drake <drake@endlessm.com>");
+MODULE_DESCRIPTION("Bluetooth support for Realtek devices ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("rtl_bt/rtl8723a_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723b_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723b_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723bs_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723bs_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723cs_cg_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723cs_cg_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723cs_vf_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723cs_vf_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723cs_xx_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723cs_xx_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723ds_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723ds_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8761a_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8761a_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8821a_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8821a_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8822b_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8822b_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852au_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852au_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8851bu_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8851bu_config.bin");
diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
new file mode 100644
index 000000000..1c6282241
--- /dev/null
+++ b/drivers/bluetooth/btrtl.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Bluetooth support for Realtek devices
+ *
+ *  Copyright (C) 2015 Endless Mobile, Inc.
+ */
+
+#define RTL_FRAG_LEN 252
+
+#define rtl_dev_err(dev, fmt, ...) bt_dev_err(dev, "RTL: " fmt, ##__VA_ARGS__)
+#define rtl_dev_warn(dev, fmt, ...) bt_dev_warn(dev, "RTL: " fmt, ##__VA_ARGS__)
+#define rtl_dev_info(dev, fmt, ...) bt_dev_info(dev, "RTL: " fmt, ##__VA_ARGS__)
+#define rtl_dev_dbg(dev, fmt, ...) bt_dev_dbg(dev, "RTL: " fmt, ##__VA_ARGS__)
+
+struct btrtl_device_info;
+
+struct rtl_chip_type_evt {
+	__u8 status;
+	__u8 type;
+} __packed;
+
+struct rtl_download_cmd {
+	__u8 index;
+	__u8 data[RTL_FRAG_LEN];
+} __packed;
+
+struct rtl_download_response {
+	__u8 status;
+	__u8 index;
+} __packed;
+
+struct rtl_rom_version_evt {
+	__u8 status;
+	__u8 version;
+} __packed;
+
+struct rtl_epatch_header {
+	__u8 signature[8];
+	__le32 fw_version;
+	__le16 num_patches;
+} __packed;
+
+struct rtl_vendor_config_entry {
+	__le16 offset;
+	__u8 len;
+	__u8 data[];
+} __packed;
+
+struct rtl_vendor_config {
+	__le32 signature;
+	__le16 total_len;
+	struct rtl_vendor_config_entry entry[];
+} __packed;
+
+#if IS_ENABLED(CONFIG_BT_RTL)
+
+struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
+					   const char *postfix);
+void btrtl_free(struct btrtl_device_info *btrtl_dev);
+int btrtl_download_firmware(struct hci_dev *hdev,
+			    struct btrtl_device_info *btrtl_dev);
+void btrtl_set_quirks(struct hci_dev *hdev,
+		      struct btrtl_device_info *btrtl_dev);
+int btrtl_setup_realtek(struct hci_dev *hdev);
+int btrtl_shutdown_realtek(struct hci_dev *hdev);
+int btrtl_get_uart_settings(struct hci_dev *hdev,
+			    struct btrtl_device_info *btrtl_dev,
+			    unsigned int *controller_baudrate,
+			    u32 *device_baudrate, bool *flow_control);
+
+#else
+
+static inline struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
+							 const char *postfix)
+{
+	return ERR_PTR(-EOPNOTSUPP);
+}
+
+static inline void btrtl_free(struct btrtl_device_info *btrtl_dev)
+{
+}
+
+static inline int btrtl_download_firmware(struct hci_dev *hdev,
+					  struct btrtl_device_info *btrtl_dev)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline void btrtl_set_quirks(struct hci_dev *hdev,
+				    struct btrtl_device_info *btrtl_dev)
+{
+}
+
+static inline int btrtl_setup_realtek(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btrtl_shutdown_realtek(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btrtl_get_uart_settings(struct hci_dev *hdev,
+					  struct btrtl_device_info *btrtl_dev,
+					  unsigned int *controller_baudrate,
+					  u32 *device_baudrate,
+					  bool *flow_control)
+{
+	return -ENOENT;
+}
+
+#endif
diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c
new file mode 100644
index 000000000..f19d31ee3
--- /dev/null
+++ b/drivers/bluetooth/btsdio.c
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Generic Bluetooth SDIO driver
+ *
+ *  Copyright (C) 2007  Cambridge Silicon Radio Ltd.
+ *  Copyright (C) 2007  Marcel Holtmann <marcel@holtmann.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#define VERSION "0.1"
+
+static const struct sdio_device_id btsdio_table[] = {
+	/* Generic Bluetooth Type-A SDIO device */
+	{ SDIO_DEVICE_CLASS(SDIO_CLASS_BT_A) },
+
+	/* Generic Bluetooth Type-B SDIO device */
+	{ SDIO_DEVICE_CLASS(SDIO_CLASS_BT_B) },
+
+	/* Generic Bluetooth AMP controller */
+	{ SDIO_DEVICE_CLASS(SDIO_CLASS_BT_AMP) },
+
+	{ }	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(sdio, btsdio_table);
+
+struct btsdio_data {
+	struct hci_dev   *hdev;
+	struct sdio_func *func;
+
+	struct work_struct work;
+
+	struct sk_buff_head txq;
+};
+
+#define REG_RDAT     0x00	/* Receiver Data */
+#define REG_TDAT     0x00	/* Transmitter Data */
+#define REG_PC_RRT   0x10	/* Read Packet Control */
+#define REG_PC_WRT   0x11	/* Write Packet Control */
+#define REG_RTC_STAT 0x12	/* Retry Control Status */
+#define REG_RTC_SET  0x12	/* Retry Control Set */
+#define REG_INTRD    0x13	/* Interrupt Indication */
+#define REG_CL_INTRD 0x13	/* Interrupt Clear */
+#define REG_EN_INTRD 0x14	/* Interrupt Enable */
+#define REG_MD_STAT  0x20	/* Bluetooth Mode Status */
+#define REG_MD_SET   0x20	/* Bluetooth Mode Set */
+
+static int btsdio_tx_packet(struct btsdio_data *data, struct sk_buff *skb)
+{
+	int err;
+
+	BT_DBG("%s", data->hdev->name);
+
+	/* Prepend Type-A header */
+	skb_push(skb, 4);
+	skb->data[0] = (skb->len & 0x0000ff);
+	skb->data[1] = (skb->len & 0x00ff00) >> 8;
+	skb->data[2] = (skb->len & 0xff0000) >> 16;
+	skb->data[3] = hci_skb_pkt_type(skb);
+
+	err = sdio_writesb(data->func, REG_TDAT, skb->data, skb->len);
+	if (err < 0) {
+		skb_pull(skb, 4);
+		sdio_writeb(data->func, 0x01, REG_PC_WRT, NULL);
+		return err;
+	}
+
+	data->hdev->stat.byte_tx += skb->len;
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static void btsdio_work(struct work_struct *work)
+{
+	struct btsdio_data *data = container_of(work, struct btsdio_data, work);
+	struct sk_buff *skb;
+	int err;
+
+	BT_DBG("%s", data->hdev->name);
+
+	sdio_claim_host(data->func);
+
+	while ((skb = skb_dequeue(&data->txq))) {
+		err = btsdio_tx_packet(data, skb);
+		if (err < 0) {
+			data->hdev->stat.err_tx++;
+			skb_queue_head(&data->txq, skb);
+			break;
+		}
+	}
+
+	sdio_release_host(data->func);
+}
+
+static int btsdio_rx_packet(struct btsdio_data *data)
+{
+	u8 hdr[4] __attribute__ ((aligned(4)));
+	struct sk_buff *skb;
+	int err, len;
+
+	BT_DBG("%s", data->hdev->name);
+
+	err = sdio_readsb(data->func, hdr, REG_RDAT, 4);
+	if (err < 0)
+		return err;
+
+	len = hdr[0] | (hdr[1] << 8) | (hdr[2] << 16);
+	if (len < 4 || len > 65543)
+		return -EILSEQ;
+
+	skb = bt_skb_alloc(len - 4, GFP_KERNEL);
+	if (!skb) {
+		/* Out of memory. Prepare a read retry and just
+		 * return with the expectation that the next time
+		 * we're called we'll have more memory.
+		 */
+		return -ENOMEM;
+	}
+
+	skb_put(skb, len - 4);
+
+	err = sdio_readsb(data->func, skb->data, REG_RDAT, len - 4);
+	if (err < 0) {
+		kfree_skb(skb);
+		return err;
+	}
+
+	data->hdev->stat.byte_rx += len;
+
+	switch (hdr[3]) {
+	case HCI_EVENT_PKT:
+	case HCI_ACLDATA_PKT:
+	case HCI_SCODATA_PKT:
+	case HCI_ISODATA_PKT:
+		hci_skb_pkt_type(skb) = hdr[3];
+		err = hci_recv_frame(data->hdev, skb);
+		if (err < 0)
+			return err;
+		break;
+	default:
+		kfree_skb(skb);
+		return -EINVAL;
+	}
+
+	sdio_writeb(data->func, 0x00, REG_PC_RRT, NULL);
+
+	return 0;
+}
+
+static void btsdio_interrupt(struct sdio_func *func)
+{
+	struct btsdio_data *data = sdio_get_drvdata(func);
+	int intrd;
+
+	BT_DBG("%s", data->hdev->name);
+
+	intrd = sdio_readb(func, REG_INTRD, NULL);
+	if (intrd & 0x01) {
+		sdio_writeb(func, 0x01, REG_CL_INTRD, NULL);
+
+		if (btsdio_rx_packet(data) < 0) {
+			data->hdev->stat.err_rx++;
+			sdio_writeb(data->func, 0x01, REG_PC_RRT, NULL);
+		}
+	}
+}
+
+static int btsdio_open(struct hci_dev *hdev)
+{
+	struct btsdio_data *data = hci_get_drvdata(hdev);
+	int err;
+
+	BT_DBG("%s", hdev->name);
+
+	sdio_claim_host(data->func);
+
+	err = sdio_enable_func(data->func);
+	if (err < 0)
+		goto release;
+
+	err = sdio_claim_irq(data->func, btsdio_interrupt);
+	if (err < 0) {
+		sdio_disable_func(data->func);
+		goto release;
+	}
+
+	if (data->func->class == SDIO_CLASS_BT_B)
+		sdio_writeb(data->func, 0x00, REG_MD_SET, NULL);
+
+	sdio_writeb(data->func, 0x01, REG_EN_INTRD, NULL);
+
+release:
+	sdio_release_host(data->func);
+
+	return err;
+}
+
+static int btsdio_close(struct hci_dev *hdev)
+{
+	struct btsdio_data *data = hci_get_drvdata(hdev);
+
+	BT_DBG("%s", hdev->name);
+
+	sdio_claim_host(data->func);
+
+	sdio_writeb(data->func, 0x00, REG_EN_INTRD, NULL);
+
+	sdio_release_irq(data->func);
+	sdio_disable_func(data->func);
+
+	sdio_release_host(data->func);
+
+	return 0;
+}
+
+static int btsdio_flush(struct hci_dev *hdev)
+{
+	struct btsdio_data *data = hci_get_drvdata(hdev);
+
+	BT_DBG("%s", hdev->name);
+
+	skb_queue_purge(&data->txq);
+
+	return 0;
+}
+
+static int btsdio_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btsdio_data *data = hci_get_drvdata(hdev);
+
+	BT_DBG("%s", hdev->name);
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+
+	default:
+		return -EILSEQ;
+	}
+
+	skb_queue_tail(&data->txq, skb);
+
+	schedule_work(&data->work);
+
+	return 0;
+}
+
+static int btsdio_probe(struct sdio_func *func,
+				const struct sdio_device_id *id)
+{
+	struct btsdio_data *data;
+	struct hci_dev *hdev;
+	struct sdio_func_tuple *tuple = func->tuples;
+	int err;
+
+	BT_DBG("func %p id %p class 0x%04x", func, id, func->class);
+
+	while (tuple) {
+		BT_DBG("code 0x%x size %d", tuple->code, tuple->size);
+		tuple = tuple->next;
+	}
+
+	/* Broadcom devices soldered onto the PCB (non-removable) use an
+	 * UART connection for Bluetooth, ignore the BT SDIO interface.
+	 */
+	if (func->vendor == SDIO_VENDOR_ID_BROADCOM &&
+	    !mmc_card_is_removable(func->card->host)) {
+		switch (func->device) {
+		case SDIO_DEVICE_ID_BROADCOM_43341:
+		case SDIO_DEVICE_ID_BROADCOM_43430:
+		case SDIO_DEVICE_ID_BROADCOM_4345:
+		case SDIO_DEVICE_ID_BROADCOM_43455:
+		case SDIO_DEVICE_ID_BROADCOM_4356:
+			return -ENODEV;
+		}
+	}
+
+	data = devm_kzalloc(&func->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->func = func;
+
+	INIT_WORK(&data->work, btsdio_work);
+
+	skb_queue_head_init(&data->txq);
+
+	hdev = hci_alloc_dev();
+	if (!hdev)
+		return -ENOMEM;
+
+	hdev->bus = HCI_SDIO;
+	hci_set_drvdata(hdev, data);
+
+	if (id->class == SDIO_CLASS_BT_AMP)
+		hdev->dev_type = HCI_AMP;
+	else
+		hdev->dev_type = HCI_PRIMARY;
+
+	data->hdev = hdev;
+
+	SET_HCIDEV_DEV(hdev, &func->dev);
+
+	hdev->open     = btsdio_open;
+	hdev->close    = btsdio_close;
+	hdev->flush    = btsdio_flush;
+	hdev->send     = btsdio_send_frame;
+
+	if (func->vendor == 0x0104 && func->device == 0x00c5)
+		set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
+	err = hci_register_dev(hdev);
+	if (err < 0) {
+		hci_free_dev(hdev);
+		return err;
+	}
+
+	sdio_set_drvdata(func, data);
+
+	return 0;
+}
+
+static void btsdio_remove(struct sdio_func *func)
+{
+	struct btsdio_data *data = sdio_get_drvdata(func);
+	struct hci_dev *hdev;
+
+	BT_DBG("func %p", func);
+
+	if (!data)
+		return;
+
+	cancel_work_sync(&data->work);
+	hdev = data->hdev;
+
+	sdio_set_drvdata(func, NULL);
+
+	hci_unregister_dev(hdev);
+
+	hci_free_dev(hdev);
+}
+
+static struct sdio_driver btsdio_driver = {
+	.name		= "btsdio",
+	.probe		= btsdio_probe,
+	.remove		= btsdio_remove,
+	.id_table	= btsdio_table,
+};
+
+module_sdio_driver(btsdio_driver);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Generic Bluetooth SDIO driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
new file mode 100644
index 000000000..954f7f3b5
--- /dev/null
+++ b/drivers/bluetooth/btusb.c
@@ -0,0 +1,4359 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Generic Bluetooth USB driver
+ *
+ *  Copyright (C) 2005-2008  Marcel Holtmann <marcel@holtmann.org>
+ */
+
+#include <linux/dmi.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/quirks.h>
+#include <linux/firmware.h>
+#include <linux/iopoll.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/suspend.h>
+#include <linux/gpio/consumer.h>
+#include <linux/debugfs.h>
+#include <asm/unaligned.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btintel.h"
+#include "btbcm.h"
+#include "btrtl.h"
+#include "btmtk.h"
+
+#define VERSION "0.8"
+
+static bool disable_scofix;
+static bool force_scofix;
+static bool enable_autosuspend = IS_ENABLED(CONFIG_BT_HCIBTUSB_AUTOSUSPEND);
+static bool reset = true;
+
+static struct usb_driver btusb_driver;
+
+#define BTUSB_IGNORE			BIT(0)
+#define BTUSB_DIGIANSWER		BIT(1)
+#define BTUSB_CSR			BIT(2)
+#define BTUSB_SNIFFER			BIT(3)
+#define BTUSB_BCM92035			BIT(4)
+#define BTUSB_BROKEN_ISOC		BIT(5)
+#define BTUSB_WRONG_SCO_MTU		BIT(6)
+#define BTUSB_ATH3012			BIT(7)
+#define BTUSB_INTEL_COMBINED		BIT(8)
+#define BTUSB_INTEL_BOOT		BIT(9)
+#define BTUSB_BCM_PATCHRAM		BIT(10)
+#define BTUSB_MARVELL			BIT(11)
+#define BTUSB_SWAVE			BIT(12)
+#define BTUSB_AMP			BIT(13)
+#define BTUSB_QCA_ROME			BIT(14)
+#define BTUSB_BCM_APPLE			BIT(15)
+#define BTUSB_REALTEK			BIT(16)
+#define BTUSB_BCM2045			BIT(17)
+#define BTUSB_IFNUM_2			BIT(18)
+#define BTUSB_CW6622			BIT(19)
+#define BTUSB_MEDIATEK			BIT(20)
+#define BTUSB_WIDEBAND_SPEECH		BIT(21)
+#define BTUSB_VALID_LE_STATES		BIT(22)
+#define BTUSB_QCA_WCN6855		BIT(23)
+#define BTUSB_INTEL_BROKEN_SHUTDOWN_LED	BIT(24)
+#define BTUSB_INTEL_BROKEN_INITIAL_NCMD BIT(25)
+#define BTUSB_INTEL_NO_WBS_SUPPORT	BIT(26)
+#define BTUSB_ACTIONS_SEMI		BIT(27)
+
+static const struct usb_device_id btusb_table[] = {
+	/* Generic Bluetooth USB device */
+	{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
+
+	/* Generic Bluetooth AMP device */
+	{ USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },
+
+	/* Generic Bluetooth USB interface */
+	{ USB_INTERFACE_INFO(0xe0, 0x01, 0x01) },
+
+	/* Apple-specific (Broadcom) devices */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_APPLE | BTUSB_IFNUM_2 },
+
+	/* MediaTek MT76x0E */
+	{ USB_DEVICE(0x0e8d, 0x763f) },
+
+	/* Broadcom SoftSailing reporting vendor specific */
+	{ USB_DEVICE(0x0a5c, 0x21e1) },
+
+	/* Apple MacBookPro 7,1 */
+	{ USB_DEVICE(0x05ac, 0x8213) },
+
+	/* Apple iMac11,1 */
+	{ USB_DEVICE(0x05ac, 0x8215) },
+
+	/* Apple MacBookPro6,2 */
+	{ USB_DEVICE(0x05ac, 0x8218) },
+
+	/* Apple MacBookAir3,1, MacBookAir3,2 */
+	{ USB_DEVICE(0x05ac, 0x821b) },
+
+	/* Apple MacBookAir4,1 */
+	{ USB_DEVICE(0x05ac, 0x821f) },
+
+	/* Apple MacBookPro8,2 */
+	{ USB_DEVICE(0x05ac, 0x821a) },
+
+	/* Apple MacMini5,1 */
+	{ USB_DEVICE(0x05ac, 0x8281) },
+
+	/* AVM BlueFRITZ! USB v2.0 */
+	{ USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE },
+
+	/* Bluetooth Ultraport Module from IBM */
+	{ USB_DEVICE(0x04bf, 0x030a) },
+
+	/* ALPS Modules with non-standard id */
+	{ USB_DEVICE(0x044e, 0x3001) },
+	{ USB_DEVICE(0x044e, 0x3002) },
+
+	/* Ericsson with non-standard id */
+	{ USB_DEVICE(0x0bdb, 0x1002) },
+
+	/* Canyon CN-BTU1 with HID interfaces */
+	{ USB_DEVICE(0x0c10, 0x0000) },
+
+	/* Broadcom BCM20702B0 (Dynex/Insignia) */
+	{ USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
+
+	/* Broadcom BCM43142A0 (Foxconn/Lenovo) */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x105b, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
+
+	/* Broadcom BCM920703 (HTC Vive) */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bb4, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
+
+	/* Foxconn - Hon Hai */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
+
+	/* Lite-On Technology - Broadcom based */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
+
+	/* Broadcom devices with vendor specific id */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
+
+	/* ASUSTek Computer - Broadcom based */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
+
+	/* Belkin F8065bf - Broadcom based */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
+
+	/* IMC Networks - Broadcom based */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
+
+	/* Dell Computer - Broadcom based  */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x413c, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
+
+	/* Toshiba Corp - Broadcom based */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
+
+	/* Intel Bluetooth USB Bootloader (RAM module) */
+	{ USB_DEVICE(0x8087, 0x0a5a),
+	  .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
+
+	{ }	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, btusb_table);
+
+static const struct usb_device_id blacklist_table[] = {
+	/* CSR BlueCore devices */
+	{ USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR },
+
+	/* Broadcom BCM2033 without firmware */
+	{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
+
+	/* Broadcom BCM2045 devices */
+	{ USB_DEVICE(0x0a5c, 0x2045), .driver_info = BTUSB_BCM2045 },
+
+	/* Atheros 3011 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
+
+	/* Atheros AR9285 Malbec with sflash firmware */
+	{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
+
+	/* Atheros 3012 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe095), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x817b), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3395), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 },
+
+	/* Atheros AR5BBU12 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
+
+	/* Atheros AR5BBU12 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
+
+	/* QCA ROME chipset */
+	{ USB_DEVICE(0x0cf3, 0x535b), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0cf3, 0xe010), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0cf3, 0xe301), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0cf3, 0xe500), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe092), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe09f), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe0a2), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04ca, 0x3011), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04ca, 0x3015), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04ca, 0x3021), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3491), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME |
+						     BTUSB_WIDEBAND_SPEECH },
+
+	/* QCA WCN6855 chipset */
+	{ USB_DEVICE(0x0cf3, 0xe600), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0cc), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0d6), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0e3), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9309), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9409), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0d0), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9108), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9109), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9208), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9209), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9308), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9408), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9508), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9509), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9608), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9609), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x10ab, 0x9f09), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x04ca, 0x3022), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0c7), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0c9), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0ca), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0cb), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0ce), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0de), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0df), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0e1), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0ea), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0ec), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x04ca, 0x3023), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x04ca, 0x3024), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x04ca, 0x3a22), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x04ca, 0x3a24), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x04ca, 0x3a26), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x04ca, 0x3a27), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+
+	/* QCA WCN785x chipset */
+	{ USB_DEVICE(0x0cf3, 0xe700), .driver_info = BTUSB_QCA_WCN6855 |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+
+	/* Broadcom BCM2035 */
+	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
+	{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
+
+	/* Broadcom BCM2045 */
+	{ USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU },
+
+	/* IBM/Lenovo ThinkPad with Broadcom chip */
+	{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU },
+
+	/* HP laptop with Broadcom chip */
+	{ USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU },
+
+	/* Dell laptop with Broadcom chip */
+	{ USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU },
+
+	/* Dell Wireless 370 and 410 devices */
+	{ USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU },
+
+	/* Belkin F8T012 and F8T013 devices */
+	{ USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU },
+	{ USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU },
+
+	/* Asus WL-BTD202 device */
+	{ USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU },
+
+	/* Kensington Bluetooth USB adapter */
+	{ USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU },
+
+	/* RTX Telecom based adapters with buggy SCO support */
+	{ USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC },
+	{ USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC },
+
+	/* CONWISE Technology based adapters with buggy SCO support */
+	{ USB_DEVICE(0x0e5e, 0x6622),
+	  .driver_info = BTUSB_BROKEN_ISOC | BTUSB_CW6622},
+
+	/* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
+	{ USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE },
+
+	/* Digianswer devices */
+	{ USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
+	{ USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
+
+	/* CSR BlueCore Bluetooth Sniffer */
+	{ USB_DEVICE(0x0a12, 0x0002),
+	  .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
+
+	/* Frontline ComProbe Bluetooth Sniffer */
+	{ USB_DEVICE(0x16d3, 0x0002),
+	  .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
+
+	/* Marvell Bluetooth devices */
+	{ USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
+	{ USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL },
+	{ USB_DEVICE(0x1286, 0x204e), .driver_info = BTUSB_MARVELL },
+
+	/* Intel Bluetooth devices */
+	{ USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0035), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
+	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
+						     BTUSB_INTEL_NO_WBS_SUPPORT |
+						     BTUSB_INTEL_BROKEN_INITIAL_NCMD |
+						     BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
+	{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED |
+						     BTUSB_INTEL_NO_WBS_SUPPORT |
+						     BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
+	{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_COMBINED },
+	{ USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED |
+						     BTUSB_INTEL_BROKEN_SHUTDOWN_LED },
+	{ USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_COMBINED },
+
+	/* Other Intel Bluetooth devices */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
+	  .driver_info = BTUSB_IGNORE },
+
+	/* Realtek 8821CE Bluetooth devices */
+	{ USB_DEVICE(0x13d3, 0x3529), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
+	/* Realtek 8822CE Bluetooth devices */
+	{ USB_DEVICE(0x0bda, 0xb00c), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0bda, 0xc822), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
+	/* Realtek 8852AE Bluetooth devices */
+	{ USB_DEVICE(0x0bda, 0x2852), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0bda, 0xc852), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0bda, 0x385a), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0bda, 0x4852), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04c5, 0x165c), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04ca, 0x4006), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0cb8, 0xc549), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
+	/* Realtek 8852CE Bluetooth devices */
+	{ USB_DEVICE(0x04ca, 0x4007), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04c5, 0x1675), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0cb8, 0xc558), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3587), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3586), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3592), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
+	/* Realtek 8852BE Bluetooth devices */
+	{ USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0bda, 0x887b), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0bda, 0xb85b), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3570), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3571), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
+	/* Realtek Bluetooth devices */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01),
+	  .driver_info = BTUSB_REALTEK },
+
+	/* MediaTek Bluetooth devices */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0e8d, 0xe0, 0x01, 0x01),
+	  .driver_info = BTUSB_MEDIATEK |
+			 BTUSB_WIDEBAND_SPEECH |
+			 BTUSB_VALID_LE_STATES },
+
+	/* Additional MediaTek MT7615E Bluetooth devices */
+	{ USB_DEVICE(0x13d3, 0x3560), .driver_info = BTUSB_MEDIATEK},
+
+	/* Additional MediaTek MT7663 Bluetooth devices */
+	{ USB_DEVICE(0x043e, 0x310c), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x04ca, 0x3801), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+
+	/* Additional MediaTek MT7668 Bluetooth devices */
+	{ USB_DEVICE(0x043e, 0x3109), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+
+	/* Additional MediaTek MT7921 Bluetooth devices */
+	{ USB_DEVICE(0x0489, 0xe0c8), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0e0), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0f2), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x04ca, 0x3802), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x13d3, 0x3563), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x13d3, 0x3564), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x13d3, 0x3567), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x13d3, 0x3578), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x13d3, 0x3583), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0cd), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0e8d, 0x0608), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+
+	/* MediaTek MT7922A Bluetooth devices */
+	{ USB_DEVICE(0x0489, 0xe0d8), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0d9), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0f5), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x13d3, 0x3568), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+	{ USB_DEVICE(0x0489, 0xe0e2), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH |
+						     BTUSB_VALID_LE_STATES },
+
+	/* Additional Realtek 8723AE Bluetooth devices */
+	{ USB_DEVICE(0x0930, 0x021d), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3394), .driver_info = BTUSB_REALTEK },
+
+	/* Additional Realtek 8723BE Bluetooth devices */
+	{ USB_DEVICE(0x0489, 0xe085), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x0489, 0xe08b), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x04f2, 0xb49f), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3410), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3416), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3459), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3494), .driver_info = BTUSB_REALTEK },
+
+	/* Additional Realtek 8723BU Bluetooth devices */
+	{ USB_DEVICE(0x7392, 0xa611), .driver_info = BTUSB_REALTEK },
+
+	/* Additional Realtek 8723DE Bluetooth devices */
+	{ USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
+
+	/* Additional Realtek 8761BUV Bluetooth devices */
+	{ USB_DEVICE(0x2357, 0x0604), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
+	  					     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x2550, 0x8761), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0bda, 0x8771), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x7392, 0xc611), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
+	/* Additional Realtek 8821AE Bluetooth devices */
+	{ USB_DEVICE(0x0b05, 0x17dc), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3414), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3458), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3461), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3462), .driver_info = BTUSB_REALTEK },
+
+	/* Additional Realtek 8822BE Bluetooth devices */
+	{ USB_DEVICE(0x13d3, 0x3526), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x0b05, 0x185c), .driver_info = BTUSB_REALTEK },
+
+	/* Additional Realtek 8822CE Bluetooth devices */
+	{ USB_DEVICE(0x04ca, 0x4005), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x04c5, 0x161f), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0b05, 0x18ef), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3548), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3549), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3553), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3555), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x2ff8, 0x3051), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x1358, 0xc123), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0bda, 0xc123), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0cb5, 0xc547), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
+	/* Actions Semiconductor ATS2851 based devices */
+	{ USB_DEVICE(0x10d7, 0xb012), .driver_info = BTUSB_ACTIONS_SEMI },
+
+	/* Silicon Wave based devices */
+	{ USB_DEVICE(0x0c10, 0x0000), .driver_info = BTUSB_SWAVE },
+
+	{ }	/* Terminating entry */
+};
+
+/* The Bluetooth USB module build into some devices needs to be reset on resume,
+ * this is a problem with the platform (likely shutting off all power) not with
+ * the module itself. So we use a DMI list to match known broken platforms.
+ */
+static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
+	{
+		/* Dell OptiPlex 3060 (QCA ROME device 0cf3:e007) */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 3060"),
+		},
+	},
+	{
+		/* Dell XPS 9360 (QCA ROME device 0cf3:e300) */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9360"),
+		},
+	},
+	{
+		/* Dell Inspiron 5565 (QCA ROME device 0cf3:e009) */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5565"),
+		},
+	},
+	{}
+};
+
+#define BTUSB_MAX_ISOC_FRAMES	10
+
+#define BTUSB_INTR_RUNNING	0
+#define BTUSB_BULK_RUNNING	1
+#define BTUSB_ISOC_RUNNING	2
+#define BTUSB_SUSPENDING	3
+#define BTUSB_DID_ISO_RESUME	4
+#define BTUSB_BOOTLOADER	5
+#define BTUSB_DOWNLOADING	6
+#define BTUSB_FIRMWARE_LOADED	7
+#define BTUSB_FIRMWARE_FAILED	8
+#define BTUSB_BOOTING		9
+#define BTUSB_DIAG_RUNNING	10
+#define BTUSB_OOB_WAKE_ENABLED	11
+#define BTUSB_HW_RESET_ACTIVE	12
+#define BTUSB_TX_WAIT_VND_EVT	13
+#define BTUSB_WAKEUP_AUTOSUSPEND	14
+#define BTUSB_USE_ALT3_FOR_WBS	15
+
+struct btusb_data {
+	struct hci_dev       *hdev;
+	struct usb_device    *udev;
+	struct usb_interface *intf;
+	struct usb_interface *isoc;
+	struct usb_interface *diag;
+	unsigned isoc_ifnum;
+
+	unsigned long flags;
+
+	bool poll_sync;
+	int intr_interval;
+	struct work_struct  work;
+	struct work_struct  waker;
+	struct delayed_work rx_work;
+
+	struct sk_buff_head acl_q;
+
+	struct usb_anchor deferred;
+	struct usb_anchor tx_anchor;
+	int tx_in_flight;
+	spinlock_t txlock;
+
+	struct usb_anchor intr_anchor;
+	struct usb_anchor bulk_anchor;
+	struct usb_anchor isoc_anchor;
+	struct usb_anchor diag_anchor;
+	struct usb_anchor ctrl_anchor;
+	spinlock_t rxlock;
+
+	struct sk_buff *evt_skb;
+	struct sk_buff *acl_skb;
+	struct sk_buff *sco_skb;
+
+	struct usb_endpoint_descriptor *intr_ep;
+	struct usb_endpoint_descriptor *bulk_tx_ep;
+	struct usb_endpoint_descriptor *bulk_rx_ep;
+	struct usb_endpoint_descriptor *isoc_tx_ep;
+	struct usb_endpoint_descriptor *isoc_rx_ep;
+	struct usb_endpoint_descriptor *diag_tx_ep;
+	struct usb_endpoint_descriptor *diag_rx_ep;
+
+	struct gpio_desc *reset_gpio;
+
+	__u8 cmdreq_type;
+	__u8 cmdreq;
+
+	unsigned int sco_num;
+	unsigned int air_mode;
+	bool usb_alt6_packet_flow;
+	int isoc_altsetting;
+	int suspend_count;
+
+	int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
+	int (*recv_acl)(struct hci_dev *hdev, struct sk_buff *skb);
+	int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
+
+	int (*setup_on_usb)(struct hci_dev *hdev);
+
+	int oob_wake_irq;   /* irq for out-of-band wake-on-bt */
+	unsigned cmd_timeout_cnt;
+};
+
+static void btusb_intel_cmd_timeout(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct gpio_desc *reset_gpio = data->reset_gpio;
+
+	if (++data->cmd_timeout_cnt < 5)
+		return;
+
+	if (!reset_gpio) {
+		bt_dev_err(hdev, "No way to reset. Ignoring and continuing");
+		return;
+	}
+
+	/*
+	 * Toggle the hard reset line if the platform provides one. The reset
+	 * is going to yank the device off the USB and then replug. So doing
+	 * once is enough. The cleanup is handled correctly on the way out
+	 * (standard USB disconnect), and the new device is detected cleanly
+	 * and bound to the driver again like it should be.
+	 */
+	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
+		bt_dev_err(hdev, "last reset failed? Not resetting again");
+		return;
+	}
+
+	bt_dev_err(hdev, "Initiating HW reset via gpio");
+	gpiod_set_value_cansleep(reset_gpio, 1);
+	msleep(100);
+	gpiod_set_value_cansleep(reset_gpio, 0);
+}
+
+static void btusb_rtl_cmd_timeout(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct gpio_desc *reset_gpio = data->reset_gpio;
+
+	if (++data->cmd_timeout_cnt < 5)
+		return;
+
+	if (!reset_gpio) {
+		bt_dev_err(hdev, "No gpio to reset Realtek device, ignoring");
+		return;
+	}
+
+	/* Toggle the hard reset line. The Realtek device is going to
+	 * yank itself off the USB and then replug. The cleanup is handled
+	 * correctly on the way out (standard USB disconnect), and the new
+	 * device is detected cleanly and bound to the driver again like
+	 * it should be.
+	 */
+	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
+		bt_dev_err(hdev, "last reset failed? Not resetting again");
+		return;
+	}
+
+	bt_dev_err(hdev, "Reset Realtek device via gpio");
+	gpiod_set_value_cansleep(reset_gpio, 1);
+	msleep(200);
+	gpiod_set_value_cansleep(reset_gpio, 0);
+}
+
+static void btusb_qca_cmd_timeout(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct gpio_desc *reset_gpio = data->reset_gpio;
+	int err;
+
+	if (++data->cmd_timeout_cnt < 5)
+		return;
+
+	if (reset_gpio) {
+		bt_dev_err(hdev, "Reset qca device via bt_en gpio");
+
+		/* Toggle the hard reset line. The qca bt device is going to
+		 * yank itself off the USB and then replug. The cleanup is handled
+		 * correctly on the way out (standard USB disconnect), and the new
+		 * device is detected cleanly and bound to the driver again like
+		 * it should be.
+		 */
+		if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
+			bt_dev_err(hdev, "last reset failed? Not resetting again");
+			return;
+		}
+
+		gpiod_set_value_cansleep(reset_gpio, 0);
+		msleep(200);
+		gpiod_set_value_cansleep(reset_gpio, 1);
+
+		return;
+	}
+
+	bt_dev_err(hdev, "Multiple cmd timeouts seen. Resetting usb device.");
+	/* This is not an unbalanced PM reference since the device will reset */
+	err = usb_autopm_get_interface(data->intf);
+	if (!err)
+		usb_queue_reset_device(data->intf);
+	else
+		bt_dev_err(hdev, "Failed usb_autopm_get_interface with %d", err);
+}
+
+static inline void btusb_free_frags(struct btusb_data *data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&data->rxlock, flags);
+
+	dev_kfree_skb_irq(data->evt_skb);
+	data->evt_skb = NULL;
+
+	dev_kfree_skb_irq(data->acl_skb);
+	data->acl_skb = NULL;
+
+	dev_kfree_skb_irq(data->sco_skb);
+	data->sco_skb = NULL;
+
+	spin_unlock_irqrestore(&data->rxlock, flags);
+}
+
+static int btusb_recv_event(struct btusb_data *data, struct sk_buff *skb)
+{
+	if (data->intr_interval) {
+		/* Trigger dequeue immediatelly if an event is received */
+		schedule_delayed_work(&data->rx_work, 0);
+	}
+
+	return data->recv_event(data->hdev, skb);
+}
+
+static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
+{
+	struct sk_buff *skb;
+	unsigned long flags;
+	int err = 0;
+
+	spin_lock_irqsave(&data->rxlock, flags);
+	skb = data->evt_skb;
+
+	while (count) {
+		int len;
+
+		if (!skb) {
+			skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC);
+			if (!skb) {
+				err = -ENOMEM;
+				break;
+			}
+
+			hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
+			hci_skb_expect(skb) = HCI_EVENT_HDR_SIZE;
+		}
+
+		len = min_t(uint, hci_skb_expect(skb), count);
+		skb_put_data(skb, buffer, len);
+
+		count -= len;
+		buffer += len;
+		hci_skb_expect(skb) -= len;
+
+		if (skb->len == HCI_EVENT_HDR_SIZE) {
+			/* Complete event header */
+			hci_skb_expect(skb) = hci_event_hdr(skb)->plen;
+
+			if (skb_tailroom(skb) < hci_skb_expect(skb)) {
+				kfree_skb(skb);
+				skb = NULL;
+
+				err = -EILSEQ;
+				break;
+			}
+		}
+
+		if (!hci_skb_expect(skb)) {
+			/* Complete frame */
+			btusb_recv_event(data, skb);
+			skb = NULL;
+		}
+	}
+
+	data->evt_skb = skb;
+	spin_unlock_irqrestore(&data->rxlock, flags);
+
+	return err;
+}
+
+static int btusb_recv_acl(struct btusb_data *data, struct sk_buff *skb)
+{
+	/* Only queue ACL packet if intr_interval is set as it means
+	 * force_poll_sync has been enabled.
+	 */
+	if (!data->intr_interval)
+		return data->recv_acl(data->hdev, skb);
+
+	skb_queue_tail(&data->acl_q, skb);
+	schedule_delayed_work(&data->rx_work, data->intr_interval);
+
+	return 0;
+}
+
+static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
+{
+	struct sk_buff *skb;
+	unsigned long flags;
+	int err = 0;
+
+	spin_lock_irqsave(&data->rxlock, flags);
+	skb = data->acl_skb;
+
+	while (count) {
+		int len;
+
+		if (!skb) {
+			skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+			if (!skb) {
+				err = -ENOMEM;
+				break;
+			}
+
+			hci_skb_pkt_type(skb) = HCI_ACLDATA_PKT;
+			hci_skb_expect(skb) = HCI_ACL_HDR_SIZE;
+		}
+
+		len = min_t(uint, hci_skb_expect(skb), count);
+		skb_put_data(skb, buffer, len);
+
+		count -= len;
+		buffer += len;
+		hci_skb_expect(skb) -= len;
+
+		if (skb->len == HCI_ACL_HDR_SIZE) {
+			__le16 dlen = hci_acl_hdr(skb)->dlen;
+
+			/* Complete ACL header */
+			hci_skb_expect(skb) = __le16_to_cpu(dlen);
+
+			if (skb_tailroom(skb) < hci_skb_expect(skb)) {
+				kfree_skb(skb);
+				skb = NULL;
+
+				err = -EILSEQ;
+				break;
+			}
+		}
+
+		if (!hci_skb_expect(skb)) {
+			/* Complete frame */
+			btusb_recv_acl(data, skb);
+			skb = NULL;
+		}
+	}
+
+	data->acl_skb = skb;
+	spin_unlock_irqrestore(&data->rxlock, flags);
+
+	return err;
+}
+
+static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
+{
+	struct sk_buff *skb;
+	unsigned long flags;
+	int err = 0;
+
+	spin_lock_irqsave(&data->rxlock, flags);
+	skb = data->sco_skb;
+
+	while (count) {
+		int len;
+
+		if (!skb) {
+			skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC);
+			if (!skb) {
+				err = -ENOMEM;
+				break;
+			}
+
+			hci_skb_pkt_type(skb) = HCI_SCODATA_PKT;
+			hci_skb_expect(skb) = HCI_SCO_HDR_SIZE;
+		}
+
+		len = min_t(uint, hci_skb_expect(skb), count);
+		skb_put_data(skb, buffer, len);
+
+		count -= len;
+		buffer += len;
+		hci_skb_expect(skb) -= len;
+
+		if (skb->len == HCI_SCO_HDR_SIZE) {
+			/* Complete SCO header */
+			hci_skb_expect(skb) = hci_sco_hdr(skb)->dlen;
+
+			if (skb_tailroom(skb) < hci_skb_expect(skb)) {
+				kfree_skb(skb);
+				skb = NULL;
+
+				err = -EILSEQ;
+				break;
+			}
+		}
+
+		if (!hci_skb_expect(skb)) {
+			/* Complete frame */
+			hci_recv_frame(data->hdev, skb);
+			skb = NULL;
+		}
+	}
+
+	data->sco_skb = skb;
+	spin_unlock_irqrestore(&data->rxlock, flags);
+
+	return err;
+}
+
+static void btusb_intr_complete(struct urb *urb)
+{
+	struct hci_dev *hdev = urb->context;
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	int err;
+
+	BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
+	       urb->actual_length);
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return;
+
+	if (urb->status == 0) {
+		hdev->stat.byte_rx += urb->actual_length;
+
+		if (btusb_recv_intr(data, urb->transfer_buffer,
+				    urb->actual_length) < 0) {
+			bt_dev_err(hdev, "corrupted event packet");
+			hdev->stat.err_rx++;
+		}
+	} else if (urb->status == -ENOENT) {
+		/* Avoid suspend failed when usb_kill_urb */
+		return;
+	}
+
+	if (!test_bit(BTUSB_INTR_RUNNING, &data->flags))
+		return;
+
+	usb_mark_last_busy(data->udev);
+	usb_anchor_urb(urb, &data->intr_anchor);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err < 0) {
+		/* -EPERM: urb is being killed;
+		 * -ENODEV: device got disconnected
+		 */
+		if (err != -EPERM && err != -ENODEV)
+			bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
+				   urb, -err);
+		if (err != -EPERM)
+			hci_cmd_sync_cancel(hdev, -err);
+		usb_unanchor_urb(urb);
+	}
+}
+
+static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct urb *urb;
+	unsigned char *buf;
+	unsigned int pipe;
+	int err, size;
+
+	BT_DBG("%s", hdev->name);
+
+	if (!data->intr_ep)
+		return -ENODEV;
+
+	urb = usb_alloc_urb(0, mem_flags);
+	if (!urb)
+		return -ENOMEM;
+
+	size = le16_to_cpu(data->intr_ep->wMaxPacketSize);
+
+	buf = kmalloc(size, mem_flags);
+	if (!buf) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress);
+
+	usb_fill_int_urb(urb, data->udev, pipe, buf, size,
+			 btusb_intr_complete, hdev, data->intr_ep->bInterval);
+
+	urb->transfer_flags |= URB_FREE_BUFFER;
+
+	usb_anchor_urb(urb, &data->intr_anchor);
+
+	err = usb_submit_urb(urb, mem_flags);
+	if (err < 0) {
+		if (err != -EPERM && err != -ENODEV)
+			bt_dev_err(hdev, "urb %p submission failed (%d)",
+				   urb, -err);
+		if (err != -EPERM)
+			hci_cmd_sync_cancel(hdev, -err);
+		usb_unanchor_urb(urb);
+	}
+
+	/* Only initialize intr_interval if URB poll sync is enabled */
+	if (!data->poll_sync)
+		goto done;
+
+	/* The units are frames (milliseconds) for full and low speed devices,
+	 * and microframes (1/8 millisecond) for highspeed and SuperSpeed
+	 * devices.
+	 *
+	 * This is done once on open/resume so it shouldn't change even if
+	 * force_poll_sync changes.
+	 */
+	switch (urb->dev->speed) {
+	case USB_SPEED_SUPER_PLUS:
+	case USB_SPEED_SUPER:	/* units are 125us */
+		data->intr_interval = usecs_to_jiffies(urb->interval * 125);
+		break;
+	default:
+		data->intr_interval = msecs_to_jiffies(urb->interval);
+		break;
+	}
+
+done:
+	usb_free_urb(urb);
+
+	return err;
+}
+
+static void btusb_bulk_complete(struct urb *urb)
+{
+	struct hci_dev *hdev = urb->context;
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	int err;
+
+	BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
+	       urb->actual_length);
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return;
+
+	if (urb->status == 0) {
+		hdev->stat.byte_rx += urb->actual_length;
+
+		if (data->recv_bulk(data, urb->transfer_buffer,
+				    urb->actual_length) < 0) {
+			bt_dev_err(hdev, "corrupted ACL packet");
+			hdev->stat.err_rx++;
+		}
+	} else if (urb->status == -ENOENT) {
+		/* Avoid suspend failed when usb_kill_urb */
+		return;
+	}
+
+	if (!test_bit(BTUSB_BULK_RUNNING, &data->flags))
+		return;
+
+	usb_anchor_urb(urb, &data->bulk_anchor);
+	usb_mark_last_busy(data->udev);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err < 0) {
+		/* -EPERM: urb is being killed;
+		 * -ENODEV: device got disconnected
+		 */
+		if (err != -EPERM && err != -ENODEV)
+			bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
+				   urb, -err);
+		usb_unanchor_urb(urb);
+	}
+}
+
+static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct urb *urb;
+	unsigned char *buf;
+	unsigned int pipe;
+	int err, size = HCI_MAX_FRAME_SIZE;
+
+	BT_DBG("%s", hdev->name);
+
+	if (!data->bulk_rx_ep)
+		return -ENODEV;
+
+	urb = usb_alloc_urb(0, mem_flags);
+	if (!urb)
+		return -ENOMEM;
+
+	buf = kmalloc(size, mem_flags);
+	if (!buf) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress);
+
+	usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
+			  btusb_bulk_complete, hdev);
+
+	urb->transfer_flags |= URB_FREE_BUFFER;
+
+	usb_mark_last_busy(data->udev);
+	usb_anchor_urb(urb, &data->bulk_anchor);
+
+	err = usb_submit_urb(urb, mem_flags);
+	if (err < 0) {
+		if (err != -EPERM && err != -ENODEV)
+			bt_dev_err(hdev, "urb %p submission failed (%d)",
+				   urb, -err);
+		usb_unanchor_urb(urb);
+	}
+
+	usb_free_urb(urb);
+
+	return err;
+}
+
+static void btusb_isoc_complete(struct urb *urb)
+{
+	struct hci_dev *hdev = urb->context;
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	int i, err;
+
+	BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
+	       urb->actual_length);
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return;
+
+	if (urb->status == 0) {
+		for (i = 0; i < urb->number_of_packets; i++) {
+			unsigned int offset = urb->iso_frame_desc[i].offset;
+			unsigned int length = urb->iso_frame_desc[i].actual_length;
+
+			if (urb->iso_frame_desc[i].status)
+				continue;
+
+			hdev->stat.byte_rx += length;
+
+			if (btusb_recv_isoc(data, urb->transfer_buffer + offset,
+					    length) < 0) {
+				bt_dev_err(hdev, "corrupted SCO packet");
+				hdev->stat.err_rx++;
+			}
+		}
+	} else if (urb->status == -ENOENT) {
+		/* Avoid suspend failed when usb_kill_urb */
+		return;
+	}
+
+	if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
+		return;
+
+	usb_anchor_urb(urb, &data->isoc_anchor);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err < 0) {
+		/* -EPERM: urb is being killed;
+		 * -ENODEV: device got disconnected
+		 */
+		if (err != -EPERM && err != -ENODEV)
+			bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
+				   urb, -err);
+		usb_unanchor_urb(urb);
+	}
+}
+
+static inline void __fill_isoc_descriptor_msbc(struct urb *urb, int len,
+					       int mtu, struct btusb_data *data)
+{
+	int i, offset = 0;
+	unsigned int interval;
+
+	BT_DBG("len %d mtu %d", len, mtu);
+
+	/* For mSBC ALT 6 setting the host will send the packet at continuous
+	 * flow. As per core spec 5, vol 4, part B, table 2.1. For ALT setting
+	 * 6 the HCI PACKET INTERVAL should be 7.5ms for every usb packets.
+	 * To maintain the rate we send 63bytes of usb packets alternatively for
+	 * 7ms and 8ms to maintain the rate as 7.5ms.
+	 */
+	if (data->usb_alt6_packet_flow) {
+		interval = 7;
+		data->usb_alt6_packet_flow = false;
+	} else {
+		interval = 6;
+		data->usb_alt6_packet_flow = true;
+	}
+
+	for (i = 0; i < interval; i++) {
+		urb->iso_frame_desc[i].offset = offset;
+		urb->iso_frame_desc[i].length = offset;
+	}
+
+	if (len && i < BTUSB_MAX_ISOC_FRAMES) {
+		urb->iso_frame_desc[i].offset = offset;
+		urb->iso_frame_desc[i].length = len;
+		i++;
+	}
+
+	urb->number_of_packets = i;
+}
+
+static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
+{
+	int i, offset = 0;
+
+	BT_DBG("len %d mtu %d", len, mtu);
+
+	for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
+					i++, offset += mtu, len -= mtu) {
+		urb->iso_frame_desc[i].offset = offset;
+		urb->iso_frame_desc[i].length = mtu;
+	}
+
+	if (len && i < BTUSB_MAX_ISOC_FRAMES) {
+		urb->iso_frame_desc[i].offset = offset;
+		urb->iso_frame_desc[i].length = len;
+		i++;
+	}
+
+	urb->number_of_packets = i;
+}
+
+static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct urb *urb;
+	unsigned char *buf;
+	unsigned int pipe;
+	int err, size;
+
+	BT_DBG("%s", hdev->name);
+
+	if (!data->isoc_rx_ep)
+		return -ENODEV;
+
+	urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags);
+	if (!urb)
+		return -ENOMEM;
+
+	size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
+						BTUSB_MAX_ISOC_FRAMES;
+
+	buf = kmalloc(size, mem_flags);
+	if (!buf) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
+
+	usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete,
+			 hdev, data->isoc_rx_ep->bInterval);
+
+	urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP;
+
+	__fill_isoc_descriptor(urb, size,
+			       le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
+
+	usb_anchor_urb(urb, &data->isoc_anchor);
+
+	err = usb_submit_urb(urb, mem_flags);
+	if (err < 0) {
+		if (err != -EPERM && err != -ENODEV)
+			bt_dev_err(hdev, "urb %p submission failed (%d)",
+				   urb, -err);
+		usb_unanchor_urb(urb);
+	}
+
+	usb_free_urb(urb);
+
+	return err;
+}
+
+static void btusb_diag_complete(struct urb *urb)
+{
+	struct hci_dev *hdev = urb->context;
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	int err;
+
+	BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
+	       urb->actual_length);
+
+	if (urb->status == 0) {
+		struct sk_buff *skb;
+
+		skb = bt_skb_alloc(urb->actual_length, GFP_ATOMIC);
+		if (skb) {
+			skb_put_data(skb, urb->transfer_buffer,
+				     urb->actual_length);
+			hci_recv_diag(hdev, skb);
+		}
+	} else if (urb->status == -ENOENT) {
+		/* Avoid suspend failed when usb_kill_urb */
+		return;
+	}
+
+	if (!test_bit(BTUSB_DIAG_RUNNING, &data->flags))
+		return;
+
+	usb_anchor_urb(urb, &data->diag_anchor);
+	usb_mark_last_busy(data->udev);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err < 0) {
+		/* -EPERM: urb is being killed;
+		 * -ENODEV: device got disconnected
+		 */
+		if (err != -EPERM && err != -ENODEV)
+			bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
+				   urb, -err);
+		usb_unanchor_urb(urb);
+	}
+}
+
+static int btusb_submit_diag_urb(struct hci_dev *hdev, gfp_t mem_flags)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct urb *urb;
+	unsigned char *buf;
+	unsigned int pipe;
+	int err, size = HCI_MAX_FRAME_SIZE;
+
+	BT_DBG("%s", hdev->name);
+
+	if (!data->diag_rx_ep)
+		return -ENODEV;
+
+	urb = usb_alloc_urb(0, mem_flags);
+	if (!urb)
+		return -ENOMEM;
+
+	buf = kmalloc(size, mem_flags);
+	if (!buf) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	pipe = usb_rcvbulkpipe(data->udev, data->diag_rx_ep->bEndpointAddress);
+
+	usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
+			  btusb_diag_complete, hdev);
+
+	urb->transfer_flags |= URB_FREE_BUFFER;
+
+	usb_mark_last_busy(data->udev);
+	usb_anchor_urb(urb, &data->diag_anchor);
+
+	err = usb_submit_urb(urb, mem_flags);
+	if (err < 0) {
+		if (err != -EPERM && err != -ENODEV)
+			bt_dev_err(hdev, "urb %p submission failed (%d)",
+				   urb, -err);
+		usb_unanchor_urb(urb);
+	}
+
+	usb_free_urb(urb);
+
+	return err;
+}
+
+static void btusb_tx_complete(struct urb *urb)
+{
+	struct sk_buff *skb = urb->context;
+	struct hci_dev *hdev = (struct hci_dev *)skb->dev;
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	unsigned long flags;
+
+	BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
+	       urb->actual_length);
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		goto done;
+
+	if (!urb->status) {
+		hdev->stat.byte_tx += urb->transfer_buffer_length;
+	} else {
+		if (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT)
+			hci_cmd_sync_cancel(hdev, -urb->status);
+		hdev->stat.err_tx++;
+	}
+
+done:
+	spin_lock_irqsave(&data->txlock, flags);
+	data->tx_in_flight--;
+	spin_unlock_irqrestore(&data->txlock, flags);
+
+	kfree(urb->setup_packet);
+
+	kfree_skb(skb);
+}
+
+static void btusb_isoc_tx_complete(struct urb *urb)
+{
+	struct sk_buff *skb = urb->context;
+	struct hci_dev *hdev = (struct hci_dev *)skb->dev;
+
+	BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
+	       urb->actual_length);
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		goto done;
+
+	if (!urb->status)
+		hdev->stat.byte_tx += urb->transfer_buffer_length;
+	else
+		hdev->stat.err_tx++;
+
+done:
+	kfree(urb->setup_packet);
+
+	kfree_skb(skb);
+}
+
+static int btusb_open(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	int err;
+
+	BT_DBG("%s", hdev->name);
+
+	err = usb_autopm_get_interface(data->intf);
+	if (err < 0)
+		return err;
+
+	/* Patching USB firmware files prior to starting any URBs of HCI path
+	 * It is more safe to use USB bulk channel for downloading USB patch
+	 */
+	if (data->setup_on_usb) {
+		err = data->setup_on_usb(hdev);
+		if (err < 0)
+			goto setup_fail;
+	}
+
+	data->intf->needs_remote_wakeup = 1;
+
+	if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
+		goto done;
+
+	err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
+	if (err < 0)
+		goto failed;
+
+	err = btusb_submit_bulk_urb(hdev, GFP_KERNEL);
+	if (err < 0) {
+		usb_kill_anchored_urbs(&data->intr_anchor);
+		goto failed;
+	}
+
+	set_bit(BTUSB_BULK_RUNNING, &data->flags);
+	btusb_submit_bulk_urb(hdev, GFP_KERNEL);
+
+	if (data->diag) {
+		if (!btusb_submit_diag_urb(hdev, GFP_KERNEL))
+			set_bit(BTUSB_DIAG_RUNNING, &data->flags);
+	}
+
+done:
+	usb_autopm_put_interface(data->intf);
+	return 0;
+
+failed:
+	clear_bit(BTUSB_INTR_RUNNING, &data->flags);
+setup_fail:
+	usb_autopm_put_interface(data->intf);
+	return err;
+}
+
+static void btusb_stop_traffic(struct btusb_data *data)
+{
+	usb_kill_anchored_urbs(&data->intr_anchor);
+	usb_kill_anchored_urbs(&data->bulk_anchor);
+	usb_kill_anchored_urbs(&data->isoc_anchor);
+	usb_kill_anchored_urbs(&data->diag_anchor);
+	usb_kill_anchored_urbs(&data->ctrl_anchor);
+}
+
+static int btusb_close(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	int err;
+
+	BT_DBG("%s", hdev->name);
+
+	cancel_delayed_work(&data->rx_work);
+	cancel_work_sync(&data->work);
+	cancel_work_sync(&data->waker);
+
+	skb_queue_purge(&data->acl_q);
+
+	clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+	clear_bit(BTUSB_BULK_RUNNING, &data->flags);
+	clear_bit(BTUSB_INTR_RUNNING, &data->flags);
+	clear_bit(BTUSB_DIAG_RUNNING, &data->flags);
+
+	btusb_stop_traffic(data);
+	btusb_free_frags(data);
+
+	err = usb_autopm_get_interface(data->intf);
+	if (err < 0)
+		goto failed;
+
+	data->intf->needs_remote_wakeup = 0;
+
+	/* Enable remote wake up for auto-suspend */
+	if (test_bit(BTUSB_WAKEUP_AUTOSUSPEND, &data->flags))
+		data->intf->needs_remote_wakeup = 1;
+
+	usb_autopm_put_interface(data->intf);
+
+failed:
+	usb_scuttle_anchored_urbs(&data->deferred);
+	return 0;
+}
+
+static int btusb_flush(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+
+	BT_DBG("%s", hdev->name);
+
+	cancel_delayed_work(&data->rx_work);
+
+	skb_queue_purge(&data->acl_q);
+
+	usb_kill_anchored_urbs(&data->tx_anchor);
+	btusb_free_frags(data);
+
+	return 0;
+}
+
+static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct usb_ctrlrequest *dr;
+	struct urb *urb;
+	unsigned int pipe;
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return ERR_PTR(-ENOMEM);
+
+	dr = kmalloc(sizeof(*dr), GFP_KERNEL);
+	if (!dr) {
+		usb_free_urb(urb);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	dr->bRequestType = data->cmdreq_type;
+	dr->bRequest     = data->cmdreq;
+	dr->wIndex       = 0;
+	dr->wValue       = 0;
+	dr->wLength      = __cpu_to_le16(skb->len);
+
+	pipe = usb_sndctrlpipe(data->udev, 0x00);
+
+	usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
+			     skb->data, skb->len, btusb_tx_complete, skb);
+
+	skb->dev = (void *)hdev;
+
+	return urb;
+}
+
+static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct urb *urb;
+	unsigned int pipe;
+
+	if (!data->bulk_tx_ep)
+		return ERR_PTR(-ENODEV);
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return ERR_PTR(-ENOMEM);
+
+	pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);
+
+	usb_fill_bulk_urb(urb, data->udev, pipe,
+			  skb->data, skb->len, btusb_tx_complete, skb);
+
+	skb->dev = (void *)hdev;
+
+	return urb;
+}
+
+static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct urb *urb;
+	unsigned int pipe;
+
+	if (!data->isoc_tx_ep)
+		return ERR_PTR(-ENODEV);
+
+	urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
+	if (!urb)
+		return ERR_PTR(-ENOMEM);
+
+	pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress);
+
+	usb_fill_int_urb(urb, data->udev, pipe,
+			 skb->data, skb->len, btusb_isoc_tx_complete,
+			 skb, data->isoc_tx_ep->bInterval);
+
+	urb->transfer_flags  = URB_ISO_ASAP;
+
+	if (data->isoc_altsetting == 6)
+		__fill_isoc_descriptor_msbc(urb, skb->len,
+					    le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize),
+					    data);
+	else
+		__fill_isoc_descriptor(urb, skb->len,
+				       le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
+	skb->dev = (void *)hdev;
+
+	return urb;
+}
+
+static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	int err;
+
+	usb_anchor_urb(urb, &data->tx_anchor);
+
+	err = usb_submit_urb(urb, GFP_KERNEL);
+	if (err < 0) {
+		if (err != -EPERM && err != -ENODEV)
+			bt_dev_err(hdev, "urb %p submission failed (%d)",
+				   urb, -err);
+		kfree(urb->setup_packet);
+		usb_unanchor_urb(urb);
+	} else {
+		usb_mark_last_busy(data->udev);
+	}
+
+	usb_free_urb(urb);
+	return err;
+}
+
+static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	unsigned long flags;
+	bool suspending;
+
+	spin_lock_irqsave(&data->txlock, flags);
+	suspending = test_bit(BTUSB_SUSPENDING, &data->flags);
+	if (!suspending)
+		data->tx_in_flight++;
+	spin_unlock_irqrestore(&data->txlock, flags);
+
+	if (!suspending)
+		return submit_tx_urb(hdev, urb);
+
+	usb_anchor_urb(urb, &data->deferred);
+	schedule_work(&data->waker);
+
+	usb_free_urb(urb);
+	return 0;
+}
+
+static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct urb *urb;
+
+	BT_DBG("%s", hdev->name);
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		urb = alloc_ctrl_urb(hdev, skb);
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		hdev->stat.cmd_tx++;
+		return submit_or_queue_tx_urb(hdev, urb);
+
+	case HCI_ACLDATA_PKT:
+		urb = alloc_bulk_urb(hdev, skb);
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		hdev->stat.acl_tx++;
+		return submit_or_queue_tx_urb(hdev, urb);
+
+	case HCI_SCODATA_PKT:
+		if (hci_conn_num(hdev, SCO_LINK) < 1)
+			return -ENODEV;
+
+		urb = alloc_isoc_urb(hdev, skb);
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		hdev->stat.sco_tx++;
+		return submit_tx_urb(hdev, urb);
+
+	case HCI_ISODATA_PKT:
+		urb = alloc_bulk_urb(hdev, skb);
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		return submit_or_queue_tx_urb(hdev, urb);
+	}
+
+	return -EILSEQ;
+}
+
+static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+
+	BT_DBG("%s evt %d", hdev->name, evt);
+
+	if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) {
+		data->sco_num = hci_conn_num(hdev, SCO_LINK);
+		data->air_mode = evt;
+		schedule_work(&data->work);
+	}
+}
+
+static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct usb_interface *intf = data->isoc;
+	struct usb_endpoint_descriptor *ep_desc;
+	int i, err;
+
+	if (!data->isoc)
+		return -ENODEV;
+
+	err = usb_set_interface(data->udev, data->isoc_ifnum, altsetting);
+	if (err < 0) {
+		bt_dev_err(hdev, "setting interface failed (%d)", -err);
+		return err;
+	}
+
+	data->isoc_altsetting = altsetting;
+
+	data->isoc_tx_ep = NULL;
+	data->isoc_rx_ep = NULL;
+
+	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+		ep_desc = &intf->cur_altsetting->endpoint[i].desc;
+
+		if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
+			data->isoc_tx_ep = ep_desc;
+			continue;
+		}
+
+		if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
+			data->isoc_rx_ep = ep_desc;
+			continue;
+		}
+	}
+
+	if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
+		bt_dev_err(hdev, "invalid SCO descriptors");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int btusb_switch_alt_setting(struct hci_dev *hdev, int new_alts)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	int err;
+
+	if (data->isoc_altsetting != new_alts) {
+		unsigned long flags;
+
+		clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+		usb_kill_anchored_urbs(&data->isoc_anchor);
+
+		/* When isochronous alternate setting needs to be
+		 * changed, because SCO connection has been added
+		 * or removed, a packet fragment may be left in the
+		 * reassembling state. This could lead to wrongly
+		 * assembled fragments.
+		 *
+		 * Clear outstanding fragment when selecting a new
+		 * alternate setting.
+		 */
+		spin_lock_irqsave(&data->rxlock, flags);
+		dev_kfree_skb_irq(data->sco_skb);
+		data->sco_skb = NULL;
+		spin_unlock_irqrestore(&data->rxlock, flags);
+
+		err = __set_isoc_interface(hdev, new_alts);
+		if (err < 0)
+			return err;
+	}
+
+	if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
+		if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
+			clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+		else
+			btusb_submit_isoc_urb(hdev, GFP_KERNEL);
+	}
+
+	return 0;
+}
+
+static struct usb_host_interface *btusb_find_altsetting(struct btusb_data *data,
+							int alt)
+{
+	struct usb_interface *intf = data->isoc;
+	int i;
+
+	BT_DBG("Looking for Alt no :%d", alt);
+
+	if (!intf)
+		return NULL;
+
+	for (i = 0; i < intf->num_altsetting; i++) {
+		if (intf->altsetting[i].desc.bAlternateSetting == alt)
+			return &intf->altsetting[i];
+	}
+
+	return NULL;
+}
+
+static void btusb_work(struct work_struct *work)
+{
+	struct btusb_data *data = container_of(work, struct btusb_data, work);
+	struct hci_dev *hdev = data->hdev;
+	int new_alts = 0;
+	int err;
+
+	if (data->sco_num > 0) {
+		if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
+			err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
+			if (err < 0) {
+				clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+				usb_kill_anchored_urbs(&data->isoc_anchor);
+				return;
+			}
+
+			set_bit(BTUSB_DID_ISO_RESUME, &data->flags);
+		}
+
+		if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_CVSD) {
+			if (hdev->voice_setting & 0x0020) {
+				static const int alts[3] = { 2, 4, 5 };
+
+				new_alts = alts[data->sco_num - 1];
+			} else {
+				new_alts = data->sco_num;
+			}
+		} else if (data->air_mode == HCI_NOTIFY_ENABLE_SCO_TRANSP) {
+			/* Bluetooth USB spec recommends alt 6 (63 bytes), but
+			 * many adapters do not support it.  Alt 1 appears to
+			 * work for all adapters that do not have alt 6, and
+			 * which work with WBS at all.  Some devices prefer
+			 * alt 3 (HCI payload >= 60 Bytes let air packet
+			 * data satisfy 60 bytes), requiring
+			 * MTU >= 3 (packets) * 25 (size) - 3 (headers) = 72
+			 * see also Core spec 5, vol 4, B 2.1.1 & Table 2.1.
+			 */
+			if (btusb_find_altsetting(data, 6))
+				new_alts = 6;
+			else if (btusb_find_altsetting(data, 3) &&
+				 hdev->sco_mtu >= 72 &&
+				 test_bit(BTUSB_USE_ALT3_FOR_WBS, &data->flags))
+				new_alts = 3;
+			else
+				new_alts = 1;
+		}
+
+		if (btusb_switch_alt_setting(hdev, new_alts) < 0)
+			bt_dev_err(hdev, "set USB alt:(%d) failed!", new_alts);
+	} else {
+		clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+		usb_kill_anchored_urbs(&data->isoc_anchor);
+
+		__set_isoc_interface(hdev, 0);
+		if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
+			usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
+	}
+}
+
+static void btusb_waker(struct work_struct *work)
+{
+	struct btusb_data *data = container_of(work, struct btusb_data, waker);
+	int err;
+
+	err = usb_autopm_get_interface(data->intf);
+	if (err < 0)
+		return;
+
+	usb_autopm_put_interface(data->intf);
+}
+
+static void btusb_rx_work(struct work_struct *work)
+{
+	struct btusb_data *data = container_of(work, struct btusb_data,
+					       rx_work.work);
+	struct sk_buff *skb;
+
+	/* Dequeue ACL data received during the interval */
+	while ((skb = skb_dequeue(&data->acl_q)))
+		data->recv_acl(data->hdev, skb);
+}
+
+static int btusb_setup_bcm92035(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	u8 val = 0x00;
+
+	BT_DBG("%s", hdev->name);
+
+	skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		bt_dev_err(hdev, "BCM92035 command failed (%ld)", PTR_ERR(skb));
+	else
+		kfree_skb(skb);
+
+	return 0;
+}
+
+static int btusb_setup_csr(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	u16 bcdDevice = le16_to_cpu(data->udev->descriptor.bcdDevice);
+	struct hci_rp_read_local_version *rp;
+	struct sk_buff *skb;
+	bool is_fake = false;
+	int ret;
+
+	BT_DBG("%s", hdev->name);
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		bt_dev_err(hdev, "CSR: Local version failed (%d)", err);
+		return err;
+	}
+
+	if (skb->len != sizeof(struct hci_rp_read_local_version)) {
+		bt_dev_err(hdev, "CSR: Local version length mismatch");
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	rp = (struct hci_rp_read_local_version *)skb->data;
+
+	bt_dev_info(hdev, "CSR: Setting up dongle with HCI ver=%u rev=%04x; LMP ver=%u subver=%04x; manufacturer=%u",
+		le16_to_cpu(rp->hci_ver), le16_to_cpu(rp->hci_rev),
+		le16_to_cpu(rp->lmp_ver), le16_to_cpu(rp->lmp_subver),
+		le16_to_cpu(rp->manufacturer));
+
+	/* Detect a wide host of Chinese controllers that aren't CSR.
+	 *
+	 * Known fake bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891
+	 *
+	 * The main thing they have in common is that these are really popular low-cost
+	 * options that support newer Bluetooth versions but rely on heavy VID/PID
+	 * squatting of this poor old Bluetooth 1.1 device. Even sold as such.
+	 *
+	 * We detect actual CSR devices by checking that the HCI manufacturer code
+	 * is Cambridge Silicon Radio (10) and ensuring that LMP sub-version and
+	 * HCI rev values always match. As they both store the firmware number.
+	 */
+	if (le16_to_cpu(rp->manufacturer) != 10 ||
+	    le16_to_cpu(rp->hci_rev) != le16_to_cpu(rp->lmp_subver))
+		is_fake = true;
+
+	/* Known legit CSR firmware build numbers and their supported BT versions:
+	 * - 1.1 (0x1) -> 0x0073, 0x020d, 0x033c, 0x034e
+	 * - 1.2 (0x2) ->                 0x04d9, 0x0529
+	 * - 2.0 (0x3) ->         0x07a6, 0x07ad, 0x0c5c
+	 * - 2.1 (0x4) ->         0x149c, 0x1735, 0x1899 (0x1899 is a BlueCore4-External)
+	 * - 4.0 (0x6) ->         0x1d86, 0x2031, 0x22bb
+	 *
+	 * e.g. Real CSR dongles with LMP subversion 0x73 are old enough that
+	 *      support BT 1.1 only; so it's a dead giveaway when some
+	 *      third-party BT 4.0 dongle reuses it.
+	 */
+	else if (le16_to_cpu(rp->lmp_subver) <= 0x034e &&
+		 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_1_1)
+		is_fake = true;
+
+	else if (le16_to_cpu(rp->lmp_subver) <= 0x0529 &&
+		 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_1_2)
+		is_fake = true;
+
+	else if (le16_to_cpu(rp->lmp_subver) <= 0x0c5c &&
+		 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_2_0)
+		is_fake = true;
+
+	else if (le16_to_cpu(rp->lmp_subver) <= 0x1899 &&
+		 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_2_1)
+		is_fake = true;
+
+	else if (le16_to_cpu(rp->lmp_subver) <= 0x22bb &&
+		 le16_to_cpu(rp->hci_ver) > BLUETOOTH_VER_4_0)
+		is_fake = true;
+
+	/* Other clones which beat all the above checks */
+	else if (bcdDevice == 0x0134 &&
+		 le16_to_cpu(rp->lmp_subver) == 0x0c5c &&
+		 le16_to_cpu(rp->hci_ver) == BLUETOOTH_VER_2_0)
+		is_fake = true;
+
+	if (is_fake) {
+		bt_dev_warn(hdev, "CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...");
+
+		/* Generally these clones have big discrepancies between
+		 * advertised features and what's actually supported.
+		 * Probably will need to be expanded in the future;
+		 * without these the controller will lock up.
+		 */
+		set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
+		set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
+		set_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks);
+		set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks);
+
+		/* Clear the reset quirk since this is not an actual
+		 * early Bluetooth 1.1 device from CSR.
+		 */
+		clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+		clear_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+
+		/*
+		 * Special workaround for these BT 4.0 chip clones, and potentially more:
+		 *
+		 * - 0x0134: a Barrot 8041a02                 (HCI rev: 0x0810 sub: 0x1012)
+		 * - 0x7558: IC markings FR3191AHAL 749H15143 (HCI rev/sub-version: 0x0709)
+		 *
+		 * These controllers are really messed-up.
+		 *
+		 * 1. Their bulk RX endpoint will never report any data unless
+		 *    the device was suspended at least once (yes, really).
+		 * 2. They will not wakeup when autosuspended and receiving data
+		 *    on their bulk RX endpoint from e.g. a keyboard or mouse
+		 *    (IOW remote-wakeup support is broken for the bulk endpoint).
+		 *
+		 * To fix 1. enable runtime-suspend, force-suspend the
+		 * HCI and then wake-it up by disabling runtime-suspend.
+		 *
+		 * To fix 2. clear the HCI's can_wake flag, this way the HCI
+		 * will still be autosuspended when it is not open.
+		 *
+		 * --
+		 *
+		 * Because these are widespread problems we prefer generic solutions; so
+		 * apply this initialization quirk to every controller that gets here,
+		 * it should be harmless. The alternative is to not work at all.
+		 */
+		pm_runtime_allow(&data->udev->dev);
+
+		ret = pm_runtime_suspend(&data->udev->dev);
+		if (ret >= 0)
+			msleep(200);
+		else
+			bt_dev_warn(hdev, "CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround");
+
+		pm_runtime_forbid(&data->udev->dev);
+
+		device_set_wakeup_capable(&data->udev->dev, false);
+
+		/* Re-enable autosuspend if this was requested */
+		if (enable_autosuspend)
+			usb_enable_autosuspend(data->udev);
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
+{
+	struct sk_buff *skb;
+	struct hci_event_hdr *hdr;
+	struct hci_ev_cmd_complete *evt;
+
+	skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	hdr = skb_put(skb, sizeof(*hdr));
+	hdr->evt = HCI_EV_CMD_COMPLETE;
+	hdr->plen = sizeof(*evt) + 1;
+
+	evt = skb_put(skb, sizeof(*evt));
+	evt->ncmd = 0x01;
+	evt->opcode = cpu_to_le16(opcode);
+
+	skb_put_u8(skb, 0x00);
+
+	hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
+
+	return hci_recv_frame(hdev, skb);
+}
+
+static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
+				 int count)
+{
+	struct hci_dev *hdev = data->hdev;
+
+	/* When the device is in bootloader mode, then it can send
+	 * events via the bulk endpoint. These events are treated the
+	 * same way as the ones received from the interrupt endpoint.
+	 */
+	if (btintel_test_flag(hdev, INTEL_BOOTLOADER))
+		return btusb_recv_intr(data, buffer, count);
+
+	return btusb_recv_bulk(data, buffer, count);
+}
+
+static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
+		struct hci_event_hdr *hdr = (void *)skb->data;
+
+		if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff &&
+		    hdr->plen > 0) {
+			const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1;
+			unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1;
+
+			switch (skb->data[2]) {
+			case 0x02:
+				/* When switching to the operational firmware
+				 * the device sends a vendor specific event
+				 * indicating that the bootup completed.
+				 */
+				btintel_bootup(hdev, ptr, len);
+				break;
+			case 0x06:
+				/* When the firmware loading completes the
+				 * device sends out a vendor specific event
+				 * indicating the result of the firmware
+				 * loading.
+				 */
+				btintel_secure_send_result(hdev, ptr, len);
+				break;
+			}
+		}
+	}
+
+	return hci_recv_frame(hdev, skb);
+}
+
+static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct urb *urb;
+
+	BT_DBG("%s", hdev->name);
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
+			struct hci_command_hdr *cmd = (void *)skb->data;
+			__u16 opcode = le16_to_cpu(cmd->opcode);
+
+			/* When in bootloader mode and the command 0xfc09
+			 * is received, it needs to be send down the
+			 * bulk endpoint. So allocate a bulk URB instead.
+			 */
+			if (opcode == 0xfc09)
+				urb = alloc_bulk_urb(hdev, skb);
+			else
+				urb = alloc_ctrl_urb(hdev, skb);
+
+			/* When the 0xfc01 command is issued to boot into
+			 * the operational firmware, it will actually not
+			 * send a command complete event. To keep the flow
+			 * control working inject that event here.
+			 */
+			if (opcode == 0xfc01)
+				inject_cmd_complete(hdev, opcode);
+		} else {
+			urb = alloc_ctrl_urb(hdev, skb);
+		}
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		hdev->stat.cmd_tx++;
+		return submit_or_queue_tx_urb(hdev, urb);
+
+	case HCI_ACLDATA_PKT:
+		urb = alloc_bulk_urb(hdev, skb);
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		hdev->stat.acl_tx++;
+		return submit_or_queue_tx_urb(hdev, urb);
+
+	case HCI_SCODATA_PKT:
+		if (hci_conn_num(hdev, SCO_LINK) < 1)
+			return -ENODEV;
+
+		urb = alloc_isoc_urb(hdev, skb);
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		hdev->stat.sco_tx++;
+		return submit_tx_urb(hdev, urb);
+
+	case HCI_ISODATA_PKT:
+		urb = alloc_bulk_urb(hdev, skb);
+		if (IS_ERR(urb))
+			return PTR_ERR(urb);
+
+		return submit_or_queue_tx_urb(hdev, urb);
+	}
+
+	return -EILSEQ;
+}
+
+/* UHW CR mapping */
+#define MTK_BT_MISC		0x70002510
+#define MTK_BT_SUBSYS_RST	0x70002610
+#define MTK_UDMA_INT_STA_BT	0x74000024
+#define MTK_UDMA_INT_STA_BT1	0x74000308
+#define MTK_BT_WDT_STATUS	0x740003A0
+#define MTK_EP_RST_OPT		0x74011890
+#define MTK_EP_RST_IN_OUT_OPT	0x00010001
+#define MTK_BT_RST_DONE		0x00000100
+#define MTK_BT_RESET_WAIT_MS	100
+#define MTK_BT_RESET_NUM_TRIES	10
+
+static void btusb_mtk_wmt_recv(struct urb *urb)
+{
+	struct hci_dev *hdev = urb->context;
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct sk_buff *skb;
+	int err;
+
+	if (urb->status == 0 && urb->actual_length > 0) {
+		hdev->stat.byte_rx += urb->actual_length;
+
+		/* WMT event shouldn't be fragmented and the size should be
+		 * less than HCI_WMT_MAX_EVENT_SIZE.
+		 */
+		skb = bt_skb_alloc(HCI_WMT_MAX_EVENT_SIZE, GFP_ATOMIC);
+		if (!skb) {
+			hdev->stat.err_rx++;
+			kfree(urb->setup_packet);
+			return;
+		}
+
+		hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
+		skb_put_data(skb, urb->transfer_buffer, urb->actual_length);
+
+		/* When someone waits for the WMT event, the skb is being cloned
+		 * and being processed the events from there then.
+		 */
+		if (test_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags)) {
+			data->evt_skb = skb_clone(skb, GFP_ATOMIC);
+			if (!data->evt_skb) {
+				kfree_skb(skb);
+				kfree(urb->setup_packet);
+				return;
+			}
+		}
+
+		err = hci_recv_frame(hdev, skb);
+		if (err < 0) {
+			kfree_skb(data->evt_skb);
+			data->evt_skb = NULL;
+			kfree(urb->setup_packet);
+			return;
+		}
+
+		if (test_and_clear_bit(BTUSB_TX_WAIT_VND_EVT,
+				       &data->flags)) {
+			/* Barrier to sync with other CPUs */
+			smp_mb__after_atomic();
+			wake_up_bit(&data->flags,
+				    BTUSB_TX_WAIT_VND_EVT);
+		}
+		kfree(urb->setup_packet);
+		return;
+	} else if (urb->status == -ENOENT) {
+		/* Avoid suspend failed when usb_kill_urb */
+		return;
+	}
+
+	usb_mark_last_busy(data->udev);
+
+	/* The URB complete handler is still called with urb->actual_length = 0
+	 * when the event is not available, so we should keep re-submitting
+	 * URB until WMT event returns, Also, It's necessary to wait some time
+	 * between the two consecutive control URBs to relax the target device
+	 * to generate the event. Otherwise, the WMT event cannot return from
+	 * the device successfully.
+	 */
+	udelay(500);
+
+	usb_anchor_urb(urb, &data->ctrl_anchor);
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err < 0) {
+		kfree(urb->setup_packet);
+		/* -EPERM: urb is being killed;
+		 * -ENODEV: device got disconnected
+		 */
+		if (err != -EPERM && err != -ENODEV)
+			bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
+				   urb, -err);
+		usb_unanchor_urb(urb);
+	}
+}
+
+static int btusb_mtk_submit_wmt_recv_urb(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct usb_ctrlrequest *dr;
+	unsigned char *buf;
+	int err, size = 64;
+	unsigned int pipe;
+	struct urb *urb;
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+
+	dr = kmalloc(sizeof(*dr), GFP_KERNEL);
+	if (!dr) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_IN;
+	dr->bRequest     = 1;
+	dr->wIndex       = cpu_to_le16(0);
+	dr->wValue       = cpu_to_le16(48);
+	dr->wLength      = cpu_to_le16(size);
+
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf) {
+		kfree(dr);
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	pipe = usb_rcvctrlpipe(data->udev, 0);
+
+	usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
+			     buf, size, btusb_mtk_wmt_recv, hdev);
+
+	urb->transfer_flags |= URB_FREE_BUFFER;
+
+	usb_anchor_urb(urb, &data->ctrl_anchor);
+	err = usb_submit_urb(urb, GFP_KERNEL);
+	if (err < 0) {
+		if (err != -EPERM && err != -ENODEV)
+			bt_dev_err(hdev, "urb %p submission failed (%d)",
+				   urb, -err);
+		usb_unanchor_urb(urb);
+	}
+
+	usb_free_urb(urb);
+
+	return err;
+}
+
+static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,
+				  struct btmtk_hci_wmt_params *wmt_params)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
+	u32 hlen, status = BTMTK_WMT_INVALID;
+	struct btmtk_hci_wmt_evt *wmt_evt;
+	struct btmtk_hci_wmt_cmd *wc;
+	struct btmtk_wmt_hdr *hdr;
+	int err;
+
+	/* Send the WMT command and wait until the WMT event returns */
+	hlen = sizeof(*hdr) + wmt_params->dlen;
+	if (hlen > 255)
+		return -EINVAL;
+
+	wc = kzalloc(hlen, GFP_KERNEL);
+	if (!wc)
+		return -ENOMEM;
+
+	hdr = &wc->hdr;
+	hdr->dir = 1;
+	hdr->op = wmt_params->op;
+	hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
+	hdr->flag = wmt_params->flag;
+	memcpy(wc->data, wmt_params->data, wmt_params->dlen);
+
+	set_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
+
+	/* WMT cmd/event doesn't follow up the generic HCI cmd/event handling,
+	 * it needs constantly polling control pipe until the host received the
+	 * WMT event, thus, we should require to specifically acquire PM counter
+	 * on the USB to prevent the interface from entering auto suspended
+	 * while WMT cmd/event in progress.
+	 */
+	err = usb_autopm_get_interface(data->intf);
+	if (err < 0)
+		goto err_free_wc;
+
+	err = __hci_cmd_send(hdev, 0xfc6f, hlen, wc);
+
+	if (err < 0) {
+		clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
+		usb_autopm_put_interface(data->intf);
+		goto err_free_wc;
+	}
+
+	/* Submit control IN URB on demand to process the WMT event */
+	err = btusb_mtk_submit_wmt_recv_urb(hdev);
+
+	usb_autopm_put_interface(data->intf);
+
+	if (err < 0)
+		goto err_free_wc;
+
+	/* The vendor specific WMT commands are all answered by a vendor
+	 * specific event and will have the Command Status or Command
+	 * Complete as with usual HCI command flow control.
+	 *
+	 * After sending the command, wait for BTUSB_TX_WAIT_VND_EVT
+	 * state to be cleared. The driver specific event receive routine
+	 * will clear that state and with that indicate completion of the
+	 * WMT command.
+	 */
+	err = wait_on_bit_timeout(&data->flags, BTUSB_TX_WAIT_VND_EVT,
+				  TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
+	if (err == -EINTR) {
+		bt_dev_err(hdev, "Execution of wmt command interrupted");
+		clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
+		goto err_free_wc;
+	}
+
+	if (err) {
+		bt_dev_err(hdev, "Execution of wmt command timed out");
+		clear_bit(BTUSB_TX_WAIT_VND_EVT, &data->flags);
+		err = -ETIMEDOUT;
+		goto err_free_wc;
+	}
+
+	if (data->evt_skb == NULL)
+		goto err_free_wc;
+
+	/* Parse and handle the return WMT event */
+	wmt_evt = (struct btmtk_hci_wmt_evt *)data->evt_skb->data;
+	if (wmt_evt->whdr.op != hdr->op) {
+		bt_dev_err(hdev, "Wrong op received %d expected %d",
+			   wmt_evt->whdr.op, hdr->op);
+		err = -EIO;
+		goto err_free_skb;
+	}
+
+	switch (wmt_evt->whdr.op) {
+	case BTMTK_WMT_SEMAPHORE:
+		if (wmt_evt->whdr.flag == 2)
+			status = BTMTK_WMT_PATCH_UNDONE;
+		else
+			status = BTMTK_WMT_PATCH_DONE;
+		break;
+	case BTMTK_WMT_FUNC_CTRL:
+		wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
+		if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
+			status = BTMTK_WMT_ON_DONE;
+		else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
+			status = BTMTK_WMT_ON_PROGRESS;
+		else
+			status = BTMTK_WMT_ON_UNDONE;
+		break;
+	case BTMTK_WMT_PATCH_DWNLD:
+		if (wmt_evt->whdr.flag == 2)
+			status = BTMTK_WMT_PATCH_DONE;
+		else if (wmt_evt->whdr.flag == 1)
+			status = BTMTK_WMT_PATCH_PROGRESS;
+		else
+			status = BTMTK_WMT_PATCH_UNDONE;
+		break;
+	}
+
+	if (wmt_params->status)
+		*wmt_params->status = status;
+
+err_free_skb:
+	kfree_skb(data->evt_skb);
+	data->evt_skb = NULL;
+err_free_wc:
+	kfree(wc);
+	return err;
+}
+
+static int btusb_mtk_func_query(struct hci_dev *hdev)
+{
+	struct btmtk_hci_wmt_params wmt_params;
+	int status, err;
+	u8 param = 0;
+
+	/* Query whether the function is enabled */
+	wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+	wmt_params.flag = 4;
+	wmt_params.dlen = sizeof(param);
+	wmt_params.data = &param;
+	wmt_params.status = &status;
+
+	err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to query function status (%d)", err);
+		return err;
+	}
+
+	return status;
+}
+
+static int btusb_mtk_uhw_reg_write(struct btusb_data *data, u32 reg, u32 val)
+{
+	struct hci_dev *hdev = data->hdev;
+	int pipe, err;
+	void *buf;
+
+	buf = kzalloc(4, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	put_unaligned_le32(val, buf);
+
+	pipe = usb_sndctrlpipe(data->udev, 0);
+	err = usb_control_msg(data->udev, pipe, 0x02,
+			      0x5E,
+			      reg >> 16, reg & 0xffff,
+			      buf, 4, USB_CTRL_SET_TIMEOUT);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to write uhw reg(%d)", err);
+		goto err_free_buf;
+	}
+
+err_free_buf:
+	kfree(buf);
+
+	return err;
+}
+
+static int btusb_mtk_uhw_reg_read(struct btusb_data *data, u32 reg, u32 *val)
+{
+	struct hci_dev *hdev = data->hdev;
+	int pipe, err;
+	void *buf;
+
+	buf = kzalloc(4, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	pipe = usb_rcvctrlpipe(data->udev, 0);
+	err = usb_control_msg(data->udev, pipe, 0x01,
+			      0xDE,
+			      reg >> 16, reg & 0xffff,
+			      buf, 4, USB_CTRL_SET_TIMEOUT);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to read uhw reg(%d)", err);
+		goto err_free_buf;
+	}
+
+	*val = get_unaligned_le32(buf);
+	bt_dev_dbg(hdev, "reg=%x, value=0x%08x", reg, *val);
+
+err_free_buf:
+	kfree(buf);
+
+	return err;
+}
+
+static int btusb_mtk_reg_read(struct btusb_data *data, u32 reg, u32 *val)
+{
+	int pipe, err, size = sizeof(u32);
+	void *buf;
+
+	buf = kzalloc(size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	pipe = usb_rcvctrlpipe(data->udev, 0);
+	err = usb_control_msg(data->udev, pipe, 0x63,
+			      USB_TYPE_VENDOR | USB_DIR_IN,
+			      reg >> 16, reg & 0xffff,
+			      buf, size, USB_CTRL_SET_TIMEOUT);
+	if (err < 0)
+		goto err_free_buf;
+
+	*val = get_unaligned_le32(buf);
+
+err_free_buf:
+	kfree(buf);
+
+	return err;
+}
+
+static int btusb_mtk_id_get(struct btusb_data *data, u32 reg, u32 *id)
+{
+	return btusb_mtk_reg_read(data, reg, id);
+}
+
+static int btusb_mtk_setup(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct btmtk_hci_wmt_params wmt_params;
+	ktime_t calltime, delta, rettime;
+	struct btmtk_tci_sleep tci_sleep;
+	unsigned long long duration;
+	struct sk_buff *skb;
+	const char *fwname;
+	int err, status;
+	u32 dev_id;
+	char fw_bin_name[64];
+	u32 fw_version = 0;
+	u8 param;
+
+	calltime = ktime_get();
+
+	err = btusb_mtk_id_get(data, 0x80000008, &dev_id);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to get device id (%d)", err);
+		return err;
+	}
+
+	if (!dev_id) {
+		err = btusb_mtk_id_get(data, 0x70010200, &dev_id);
+		if (err < 0) {
+			bt_dev_err(hdev, "Failed to get device id (%d)", err);
+			return err;
+		}
+		err = btusb_mtk_id_get(data, 0x80021004, &fw_version);
+		if (err < 0) {
+			bt_dev_err(hdev, "Failed to get fw version (%d)", err);
+			return err;
+		}
+	}
+
+	switch (dev_id) {
+	case 0x7663:
+		fwname = FIRMWARE_MT7663;
+		break;
+	case 0x7668:
+		fwname = FIRMWARE_MT7668;
+		break;
+	case 0x7922:
+	case 0x7961:
+		snprintf(fw_bin_name, sizeof(fw_bin_name),
+			"mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
+			 dev_id & 0xffff, (fw_version & 0xff) + 1);
+		err = btmtk_setup_firmware_79xx(hdev, fw_bin_name,
+						btusb_mtk_hci_wmt_sync);
+		if (err < 0) {
+			bt_dev_err(hdev, "Failed to set up firmware (%d)", err);
+			return err;
+		}
+
+		/* It's Device EndPoint Reset Option Register */
+		btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
+
+		/* Enable Bluetooth protocol */
+		param = 1;
+		wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+		wmt_params.flag = 0;
+		wmt_params.dlen = sizeof(param);
+		wmt_params.data = &param;
+		wmt_params.status = NULL;
+
+		err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
+		if (err < 0) {
+			bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+			return err;
+		}
+
+		hci_set_msft_opcode(hdev, 0xFD30);
+		hci_set_aosp_capable(hdev);
+		goto done;
+	default:
+		bt_dev_err(hdev, "Unsupported hardware variant (%08x)",
+			   dev_id);
+		return -ENODEV;
+	}
+
+	/* Query whether the firmware is already download */
+	wmt_params.op = BTMTK_WMT_SEMAPHORE;
+	wmt_params.flag = 1;
+	wmt_params.dlen = 0;
+	wmt_params.data = NULL;
+	wmt_params.status = &status;
+
+	err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
+		return err;
+	}
+
+	if (status == BTMTK_WMT_PATCH_DONE) {
+		bt_dev_info(hdev, "firmware already downloaded");
+		goto ignore_setup_fw;
+	}
+
+	/* Setup a firmware which the device definitely requires */
+	err = btmtk_setup_firmware(hdev, fwname,
+				   btusb_mtk_hci_wmt_sync);
+	if (err < 0)
+		return err;
+
+ignore_setup_fw:
+	err = readx_poll_timeout(btusb_mtk_func_query, hdev, status,
+				 status < 0 || status != BTMTK_WMT_ON_PROGRESS,
+				 2000, 5000000);
+	/* -ETIMEDOUT happens */
+	if (err < 0)
+		return err;
+
+	/* The other errors happen in btusb_mtk_func_query */
+	if (status < 0)
+		return status;
+
+	if (status == BTMTK_WMT_ON_DONE) {
+		bt_dev_info(hdev, "function already on");
+		goto ignore_func_on;
+	}
+
+	/* Enable Bluetooth protocol */
+	param = 1;
+	wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+	wmt_params.flag = 0;
+	wmt_params.dlen = sizeof(param);
+	wmt_params.data = &param;
+	wmt_params.status = NULL;
+
+	err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+		return err;
+	}
+
+ignore_func_on:
+	/* Apply the low power environment setup */
+	tci_sleep.mode = 0x5;
+	tci_sleep.duration = cpu_to_le16(0x640);
+	tci_sleep.host_duration = cpu_to_le16(0x640);
+	tci_sleep.host_wakeup_pin = 0;
+	tci_sleep.time_compensation = 0;
+
+	skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+done:
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Device setup in %llu usecs", duration);
+
+	return 0;
+}
+
+static int btusb_mtk_shutdown(struct hci_dev *hdev)
+{
+	struct btmtk_hci_wmt_params wmt_params;
+	u8 param = 0;
+	int err;
+
+	/* Disable the device */
+	wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+	wmt_params.flag = 0;
+	wmt_params.dlen = sizeof(param);
+	wmt_params.data = &param;
+	wmt_params.status = NULL;
+
+	err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static void btusb_mtk_cmd_timeout(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	u32 val;
+	int err, retry = 0;
+
+	/* It's MediaTek specific bluetooth reset mechanism via USB */
+	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
+		bt_dev_err(hdev, "last reset failed? Not resetting again");
+		return;
+	}
+
+	err = usb_autopm_get_interface(data->intf);
+	if (err < 0)
+		return;
+
+	btusb_stop_traffic(data);
+	usb_kill_anchored_urbs(&data->tx_anchor);
+
+	/* It's Device EndPoint Reset Option Register */
+	bt_dev_dbg(hdev, "Initiating reset mechanism via uhw");
+	btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
+	btusb_mtk_uhw_reg_read(data, MTK_BT_WDT_STATUS, &val);
+
+	/* Reset the bluetooth chip via USB interface. */
+	btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 1);
+	btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
+	btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
+	btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT1, 0x000000FF);
+	btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT1, &val);
+	/* MT7921 need to delay 20ms between toggle reset bit */
+	msleep(20);
+	btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, 0);
+	btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
+
+	/* Poll the register until reset is completed */
+	do {
+		btusb_mtk_uhw_reg_read(data, MTK_BT_MISC, &val);
+		if (val & MTK_BT_RST_DONE) {
+			bt_dev_dbg(hdev, "Bluetooth Reset Successfully");
+			break;
+		}
+
+		bt_dev_dbg(hdev, "Polling Bluetooth Reset CR");
+		retry++;
+		msleep(MTK_BT_RESET_WAIT_MS);
+	} while (retry < MTK_BT_RESET_NUM_TRIES);
+
+	btusb_mtk_id_get(data, 0x70010200, &val);
+	if (!val)
+		bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
+
+	usb_queue_reset_device(data->intf);
+
+	clear_bit(BTUSB_HW_RESET_ACTIVE, &data->flags);
+}
+
+static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	u16 handle = le16_to_cpu(hci_acl_hdr(skb)->handle);
+
+	switch (handle) {
+	case 0xfc6f:		/* Firmware dump from device */
+		/* When the firmware hangs, the device can no longer
+		 * suspend and thus disable auto-suspend.
+		 */
+		usb_disable_autosuspend(data->udev);
+		fallthrough;
+	case 0x05ff:		/* Firmware debug logging 1 */
+	case 0x05fe:		/* Firmware debug logging 2 */
+		return hci_recv_diag(hdev, skb);
+	}
+
+	return hci_recv_frame(hdev, skb);
+}
+
+#ifdef CONFIG_PM
+/* Configure an out-of-band gpio as wake-up pin, if specified in device tree */
+static int marvell_config_oob_wake(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct device *dev = &data->udev->dev;
+	u16 pin, gap, opcode;
+	int ret;
+	u8 cmd[5];
+
+	/* Move on if no wakeup pin specified */
+	if (of_property_read_u16(dev->of_node, "marvell,wakeup-pin", &pin) ||
+	    of_property_read_u16(dev->of_node, "marvell,wakeup-gap-ms", &gap))
+		return 0;
+
+	/* Vendor specific command to configure a GPIO as wake-up pin */
+	opcode = hci_opcode_pack(0x3F, 0x59);
+	cmd[0] = opcode & 0xFF;
+	cmd[1] = opcode >> 8;
+	cmd[2] = 2; /* length of parameters that follow */
+	cmd[3] = pin;
+	cmd[4] = gap; /* time in ms, for which wakeup pin should be asserted */
+
+	skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
+	if (!skb) {
+		bt_dev_err(hdev, "%s: No memory", __func__);
+		return -ENOMEM;
+	}
+
+	skb_put_data(skb, cmd, sizeof(cmd));
+	hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
+
+	ret = btusb_send_frame(hdev, skb);
+	if (ret) {
+		bt_dev_err(hdev, "%s: configuration failed", __func__);
+		kfree_skb(skb);
+		return ret;
+	}
+
+	return 0;
+}
+#endif
+
+static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
+				    const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	u8 buf[8];
+	long ret;
+
+	buf[0] = 0xfe;
+	buf[1] = sizeof(bdaddr_t);
+	memcpy(buf + 2, bdaddr, sizeof(bdaddr_t));
+
+	skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		bt_dev_err(hdev, "changing Marvell device address failed (%ld)",
+			   ret);
+		return ret;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
+				    const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	u8 buf[10];
+	long ret;
+
+	buf[0] = 0x01;
+	buf[1] = 0x01;
+	buf[2] = 0x00;
+	buf[3] = sizeof(bdaddr_t);
+	memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
+
+	skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		bt_dev_err(hdev, "Change address command failed (%ld)", ret);
+		return ret;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev,
+				const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	u8 buf[6];
+	long ret;
+
+	memcpy(buf, bdaddr, sizeof(bdaddr_t));
+
+	skb = __hci_cmd_sync_ev(hdev, 0xfc14, sizeof(buf), buf,
+				HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		ret = PTR_ERR(skb);
+		bt_dev_err(hdev, "Change address command failed (%ld)", ret);
+		return ret;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+#define QCA_DFU_PACKET_LEN	4096
+
+#define QCA_GET_TARGET_VERSION	0x09
+#define QCA_CHECK_STATUS	0x05
+#define QCA_DFU_DOWNLOAD	0x01
+
+#define QCA_SYSCFG_UPDATED	0x40
+#define QCA_PATCH_UPDATED	0x80
+#define QCA_DFU_TIMEOUT		3000
+#define QCA_FLAG_MULTI_NVM      0x80
+#define QCA_BT_RESET_WAIT_MS    100
+
+#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
+#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
+
+struct qca_version {
+	__le32	rom_version;
+	__le32	patch_version;
+	__le32	ram_version;
+	__u8	chip_id;
+	__u8	platform_id;
+	__le16	flag;
+	__u8	reserved[4];
+} __packed;
+
+struct qca_rampatch_version {
+	__le16	rom_version_high;
+	__le16  rom_version_low;
+	__le16	patch_version;
+} __packed;
+
+struct qca_device_info {
+	u32	rom_version;
+	u8	rampatch_hdr;	/* length of header in rampatch */
+	u8	nvm_hdr;	/* length of header in NVM */
+	u8	ver_offset;	/* offset of version structure in rampatch */
+};
+
+static const struct qca_device_info qca_devices_table[] = {
+	{ 0x00000100, 20, 4,  8 }, /* Rome 1.0 */
+	{ 0x00000101, 20, 4,  8 }, /* Rome 1.1 */
+	{ 0x00000200, 28, 4, 16 }, /* Rome 2.0 */
+	{ 0x00000201, 28, 4, 16 }, /* Rome 2.1 */
+	{ 0x00000300, 28, 4, 16 }, /* Rome 3.0 */
+	{ 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
+	{ 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
+	{ 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
+	{ 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
+	{ 0x00190200, 40, 4, 16 }, /* WCN785x 2.0 */
+};
+
+static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request,
+				     void *data, u16 size)
+{
+	int pipe, err;
+	u8 *buf;
+
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	/* Found some of USB hosts have IOT issues with ours so that we should
+	 * not wait until HCI layer is ready.
+	 */
+	pipe = usb_rcvctrlpipe(udev, 0);
+	err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN,
+			      0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
+	if (err < 0) {
+		dev_err(&udev->dev, "Failed to access otp area (%d)", err);
+		goto done;
+	}
+
+	memcpy(data, buf, size);
+
+done:
+	kfree(buf);
+
+	return err;
+}
+
+static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
+				       const struct firmware *firmware,
+				       size_t hdr_size)
+{
+	struct btusb_data *btdata = hci_get_drvdata(hdev);
+	struct usb_device *udev = btdata->udev;
+	size_t count, size, sent = 0;
+	int pipe, len, err;
+	u8 *buf;
+
+	buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	count = firmware->size;
+
+	size = min_t(size_t, count, hdr_size);
+	memcpy(buf, firmware->data, size);
+
+	/* USB patches should go down to controller through USB path
+	 * because binary format fits to go down through USB channel.
+	 * USB control path is for patching headers and USB bulk is for
+	 * patch body.
+	 */
+	pipe = usb_sndctrlpipe(udev, 0);
+	err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR,
+			      0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to send headers (%d)", err);
+		goto done;
+	}
+
+	sent += size;
+	count -= size;
+
+	/* ep2 need time to switch from function acl to function dfu,
+	 * so we add 20ms delay here.
+	 */
+	msleep(20);
+
+	while (count) {
+		size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
+
+		memcpy(buf, firmware->data + sent, size);
+
+		pipe = usb_sndbulkpipe(udev, 0x02);
+		err = usb_bulk_msg(udev, pipe, buf, size, &len,
+				   QCA_DFU_TIMEOUT);
+		if (err < 0) {
+			bt_dev_err(hdev, "Failed to send body at %zd of %zd (%d)",
+				   sent, firmware->size, err);
+			break;
+		}
+
+		if (size != len) {
+			bt_dev_err(hdev, "Failed to get bulk buffer");
+			err = -EILSEQ;
+			break;
+		}
+
+		sent  += size;
+		count -= size;
+	}
+
+done:
+	kfree(buf);
+	return err;
+}
+
+static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
+					 struct qca_version *ver,
+					 const struct qca_device_info *info)
+{
+	struct qca_rampatch_version *rver;
+	const struct firmware *fw;
+	u32 ver_rom, ver_patch, rver_rom;
+	u16 rver_rom_low, rver_rom_high, rver_patch;
+	char fwname[64];
+	int err;
+
+	ver_rom = le32_to_cpu(ver->rom_version);
+	ver_patch = le32_to_cpu(ver->patch_version);
+
+	snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom);
+
+	err = request_firmware(&fw, fwname, &hdev->dev);
+	if (err) {
+		bt_dev_err(hdev, "failed to request rampatch file: %s (%d)",
+			   fwname, err);
+		return err;
+	}
+
+	bt_dev_info(hdev, "using rampatch file: %s", fwname);
+
+	rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
+	rver_rom_low = le16_to_cpu(rver->rom_version_low);
+	rver_patch = le16_to_cpu(rver->patch_version);
+
+	if (ver_rom & ~0xffffU) {
+		rver_rom_high = le16_to_cpu(rver->rom_version_high);
+		rver_rom = le32_to_cpu(rver_rom_high << 16 | rver_rom_low);
+	} else {
+		rver_rom = rver_rom_low;
+	}
+
+	bt_dev_info(hdev, "QCA: patch rome 0x%x build 0x%x, "
+		    "firmware rome 0x%x build 0x%x",
+		    rver_rom, rver_patch, ver_rom, ver_patch);
+
+	if (rver_rom != ver_rom || rver_patch <= ver_patch) {
+		bt_dev_err(hdev, "rampatch file version did not match with firmware");
+		err = -EINVAL;
+		goto done;
+	}
+
+	err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr);
+
+done:
+	release_firmware(fw);
+
+	return err;
+}
+
+static void btusb_generate_qca_nvm_name(char *fwname, size_t max_size,
+					const struct qca_version *ver)
+{
+	u32 rom_version = le32_to_cpu(ver->rom_version);
+	u16 flag = le16_to_cpu(ver->flag);
+
+	if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
+		/* The board_id should be split into two bytes
+		 * The 1st byte is chip ID, and the 2nd byte is platform ID
+		 * For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID
+		 * we have several platforms, and platform IDs are continuously added
+		 * Platform ID:
+		 * 0x00 is for Mobile
+		 * 0x01 is for X86
+		 * 0x02 is for Automotive
+		 * 0x03 is for Consumer electronic
+		 */
+		u16 board_id = (ver->chip_id << 8) + ver->platform_id;
+		const char *variant;
+
+		switch (le32_to_cpu(ver->ram_version)) {
+		case WCN6855_2_0_RAM_VERSION_GF:
+		case WCN6855_2_1_RAM_VERSION_GF:
+			variant = "_gf";
+			break;
+		default:
+			variant = "";
+			break;
+		}
+
+		if (board_id == 0) {
+			snprintf(fwname, max_size, "qca/nvm_usb_%08x%s.bin",
+				rom_version, variant);
+		} else {
+			snprintf(fwname, max_size, "qca/nvm_usb_%08x%s_%04x.bin",
+				rom_version, variant, board_id);
+		}
+	} else {
+		snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin",
+			rom_version);
+	}
+
+}
+
+static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
+				    struct qca_version *ver,
+				    const struct qca_device_info *info)
+{
+	const struct firmware *fw;
+	char fwname[64];
+	int err;
+
+	btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver);
+
+	err = request_firmware(&fw, fwname, &hdev->dev);
+	if (err) {
+		bt_dev_err(hdev, "failed to request NVM file: %s (%d)",
+			   fwname, err);
+		return err;
+	}
+
+	bt_dev_info(hdev, "using NVM file: %s", fwname);
+
+	err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);
+
+	release_firmware(fw);
+
+	return err;
+}
+
+/* identify the ROM version and check whether patches are needed */
+static bool btusb_qca_need_patch(struct usb_device *udev)
+{
+	struct qca_version ver;
+
+	if (btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver,
+				      sizeof(ver)) < 0)
+		return false;
+	/* only low ROM versions need patches */
+	return !(le32_to_cpu(ver.rom_version) & ~0xffffU);
+}
+
+static int btusb_setup_qca(struct hci_dev *hdev)
+{
+	struct btusb_data *btdata = hci_get_drvdata(hdev);
+	struct usb_device *udev = btdata->udev;
+	const struct qca_device_info *info = NULL;
+	struct qca_version ver;
+	u32 ver_rom;
+	u8 status;
+	int i, err;
+
+	err = btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver,
+					sizeof(ver));
+	if (err < 0)
+		return err;
+
+	ver_rom = le32_to_cpu(ver.rom_version);
+
+	for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
+		if (ver_rom == qca_devices_table[i].rom_version)
+			info = &qca_devices_table[i];
+	}
+	if (!info) {
+		/* If the rom_version is not matched in the qca_devices_table
+		 * and the high ROM version is not zero, we assume this chip no
+		 * need to load the rampatch and nvm.
+		 */
+		if (ver_rom & ~0xffffU)
+			return 0;
+
+		bt_dev_err(hdev, "don't support firmware rome 0x%x", ver_rom);
+		return -ENODEV;
+	}
+
+	err = btusb_qca_send_vendor_req(udev, QCA_CHECK_STATUS, &status,
+					sizeof(status));
+	if (err < 0)
+		return err;
+
+	if (!(status & QCA_PATCH_UPDATED)) {
+		err = btusb_setup_qca_load_rampatch(hdev, &ver, info);
+		if (err < 0)
+			return err;
+	}
+
+	err = btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver,
+					sizeof(ver));
+	if (err < 0)
+		return err;
+
+	if (!(status & QCA_SYSCFG_UPDATED)) {
+		err = btusb_setup_qca_load_nvm(hdev, &ver, info);
+		if (err < 0)
+			return err;
+
+		/* WCN6855 2.1 and later will reset to apply firmware downloaded here, so
+		 * wait ~100ms for reset Done then go ahead, otherwise, it maybe
+		 * cause potential enable failure.
+		 */
+		if (info->rom_version >= 0x00130201)
+			msleep(QCA_BT_RESET_WAIT_MS);
+	}
+
+	/* Mark HCI_OP_ENHANCED_SETUP_SYNC_CONN as broken as it doesn't seem to
+	 * work with the likes of HSP/HFP mSBC.
+	 */
+	set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
+
+	return 0;
+}
+
+static inline int __set_diag_interface(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct usb_interface *intf = data->diag;
+	int i;
+
+	if (!data->diag)
+		return -ENODEV;
+
+	data->diag_tx_ep = NULL;
+	data->diag_rx_ep = NULL;
+
+	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+		struct usb_endpoint_descriptor *ep_desc;
+
+		ep_desc = &intf->cur_altsetting->endpoint[i].desc;
+
+		if (!data->diag_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
+			data->diag_tx_ep = ep_desc;
+			continue;
+		}
+
+		if (!data->diag_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
+			data->diag_rx_ep = ep_desc;
+			continue;
+		}
+	}
+
+	if (!data->diag_tx_ep || !data->diag_rx_ep) {
+		bt_dev_err(hdev, "invalid diagnostic descriptors");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static struct urb *alloc_diag_urb(struct hci_dev *hdev, bool enable)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct sk_buff *skb;
+	struct urb *urb;
+	unsigned int pipe;
+
+	if (!data->diag_tx_ep)
+		return ERR_PTR(-ENODEV);
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!urb)
+		return ERR_PTR(-ENOMEM);
+
+	skb = bt_skb_alloc(2, GFP_KERNEL);
+	if (!skb) {
+		usb_free_urb(urb);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	skb_put_u8(skb, 0xf0);
+	skb_put_u8(skb, enable);
+
+	pipe = usb_sndbulkpipe(data->udev, data->diag_tx_ep->bEndpointAddress);
+
+	usb_fill_bulk_urb(urb, data->udev, pipe,
+			  skb->data, skb->len, btusb_tx_complete, skb);
+
+	skb->dev = (void *)hdev;
+
+	return urb;
+}
+
+static int btusb_bcm_set_diag(struct hci_dev *hdev, bool enable)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct urb *urb;
+
+	if (!data->diag)
+		return -ENODEV;
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return -ENETDOWN;
+
+	urb = alloc_diag_urb(hdev, enable);
+	if (IS_ERR(urb))
+		return PTR_ERR(urb);
+
+	return submit_or_queue_tx_urb(hdev, urb);
+}
+
+#ifdef CONFIG_PM
+static irqreturn_t btusb_oob_wake_handler(int irq, void *priv)
+{
+	struct btusb_data *data = priv;
+
+	pm_wakeup_event(&data->udev->dev, 0);
+	pm_system_wakeup();
+
+	/* Disable only if not already disabled (keep it balanced) */
+	if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) {
+		disable_irq_nosync(irq);
+		disable_irq_wake(irq);
+	}
+	return IRQ_HANDLED;
+}
+
+static const struct of_device_id btusb_match_table[] = {
+	{ .compatible = "usb1286,204e" },
+	{ .compatible = "usbcf3,e300" }, /* QCA6174A */
+	{ .compatible = "usb4ca,301a" }, /* QCA6174A (Lite-On) */
+	{ }
+};
+MODULE_DEVICE_TABLE(of, btusb_match_table);
+
+/* Use an oob wakeup pin? */
+static int btusb_config_oob_wake(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct device *dev = &data->udev->dev;
+	int irq, ret;
+
+	clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags);
+
+	if (!of_match_device(btusb_match_table, dev))
+		return 0;
+
+	/* Move on if no IRQ specified */
+	irq = of_irq_get_byname(dev->of_node, "wakeup");
+	if (irq <= 0) {
+		bt_dev_dbg(hdev, "%s: no OOB Wakeup IRQ in DT", __func__);
+		return 0;
+	}
+
+	irq_set_status_flags(irq, IRQ_NOAUTOEN);
+	ret = devm_request_irq(&hdev->dev, irq, btusb_oob_wake_handler,
+			       0, "OOB Wake-on-BT", data);
+	if (ret) {
+		bt_dev_err(hdev, "%s: IRQ request failed", __func__);
+		return ret;
+	}
+
+	ret = device_init_wakeup(dev, true);
+	if (ret) {
+		bt_dev_err(hdev, "%s: failed to init_wakeup", __func__);
+		return ret;
+	}
+
+	data->oob_wake_irq = irq;
+	bt_dev_info(hdev, "OOB Wake-on-BT configured at IRQ %u", irq);
+	return 0;
+}
+#endif
+
+static void btusb_check_needs_reset_resume(struct usb_interface *intf)
+{
+	if (dmi_check_system(btusb_needs_reset_resume_table))
+		interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
+}
+
+static bool btusb_wakeup(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+
+	return device_may_wakeup(&data->udev->dev);
+}
+
+static int btusb_shutdown_qca(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "HCI reset during shutdown failed");
+		return PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static ssize_t force_poll_sync_read(struct file *file, char __user *user_buf,
+				    size_t count, loff_t *ppos)
+{
+	struct btusb_data *data = file->private_data;
+	char buf[3];
+
+	buf[0] = data->poll_sync ? 'Y' : 'N';
+	buf[1] = '\n';
+	buf[2] = '\0';
+	return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
+}
+
+static ssize_t force_poll_sync_write(struct file *file,
+				     const char __user *user_buf,
+				     size_t count, loff_t *ppos)
+{
+	struct btusb_data *data = file->private_data;
+	bool enable;
+	int err;
+
+	err = kstrtobool_from_user(user_buf, count, &enable);
+	if (err)
+		return err;
+
+	/* Only allow changes while the adapter is down */
+	if (test_bit(HCI_UP, &data->hdev->flags))
+		return -EPERM;
+
+	if (data->poll_sync == enable)
+		return -EALREADY;
+
+	data->poll_sync = enable;
+
+	return count;
+}
+
+static const struct file_operations force_poll_sync_fops = {
+	.open		= simple_open,
+	.read		= force_poll_sync_read,
+	.write		= force_poll_sync_write,
+	.llseek		= default_llseek,
+};
+
+static int btusb_probe(struct usb_interface *intf,
+		       const struct usb_device_id *id)
+{
+	struct usb_endpoint_descriptor *ep_desc;
+	struct gpio_desc *reset_gpio;
+	struct btusb_data *data;
+	struct hci_dev *hdev;
+	unsigned ifnum_base;
+	int i, err, priv_size;
+
+	BT_DBG("intf %p id %p", intf, id);
+
+	/* interface numbers are hardcoded in the spec */
+	if (intf->cur_altsetting->desc.bInterfaceNumber != 0) {
+		if (!(id->driver_info & BTUSB_IFNUM_2))
+			return -ENODEV;
+		if (intf->cur_altsetting->desc.bInterfaceNumber != 2)
+			return -ENODEV;
+	}
+
+	ifnum_base = intf->cur_altsetting->desc.bInterfaceNumber;
+
+	if (!id->driver_info) {
+		const struct usb_device_id *match;
+
+		match = usb_match_id(intf, blacklist_table);
+		if (match)
+			id = match;
+	}
+
+	if (id->driver_info == BTUSB_IGNORE)
+		return -ENODEV;
+
+	if (id->driver_info & BTUSB_ATH3012) {
+		struct usb_device *udev = interface_to_usbdev(intf);
+
+		/* Old firmware would otherwise let ath3k driver load
+		 * patch and sysconfig files
+		 */
+		if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001 &&
+		    !btusb_qca_need_patch(udev))
+			return -ENODEV;
+	}
+
+	data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+		ep_desc = &intf->cur_altsetting->endpoint[i].desc;
+
+		if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) {
+			data->intr_ep = ep_desc;
+			continue;
+		}
+
+		if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
+			data->bulk_tx_ep = ep_desc;
+			continue;
+		}
+
+		if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
+			data->bulk_rx_ep = ep_desc;
+			continue;
+		}
+	}
+
+	if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep)
+		return -ENODEV;
+
+	if (id->driver_info & BTUSB_AMP) {
+		data->cmdreq_type = USB_TYPE_CLASS | 0x01;
+		data->cmdreq = 0x2b;
+	} else {
+		data->cmdreq_type = USB_TYPE_CLASS;
+		data->cmdreq = 0x00;
+	}
+
+	data->udev = interface_to_usbdev(intf);
+	data->intf = intf;
+
+	INIT_WORK(&data->work, btusb_work);
+	INIT_WORK(&data->waker, btusb_waker);
+	INIT_DELAYED_WORK(&data->rx_work, btusb_rx_work);
+
+	skb_queue_head_init(&data->acl_q);
+
+	init_usb_anchor(&data->deferred);
+	init_usb_anchor(&data->tx_anchor);
+	spin_lock_init(&data->txlock);
+
+	init_usb_anchor(&data->intr_anchor);
+	init_usb_anchor(&data->bulk_anchor);
+	init_usb_anchor(&data->isoc_anchor);
+	init_usb_anchor(&data->diag_anchor);
+	init_usb_anchor(&data->ctrl_anchor);
+	spin_lock_init(&data->rxlock);
+
+	priv_size = 0;
+
+	data->recv_event = hci_recv_frame;
+	data->recv_bulk = btusb_recv_bulk;
+
+	if (id->driver_info & BTUSB_INTEL_COMBINED) {
+		/* Allocate extra space for Intel device */
+		priv_size += sizeof(struct btintel_data);
+
+		/* Override the rx handlers */
+		data->recv_event = btusb_recv_event_intel;
+		data->recv_bulk = btusb_recv_bulk_intel;
+	}
+
+	data->recv_acl = hci_recv_frame;
+
+	hdev = hci_alloc_dev_priv(priv_size);
+	if (!hdev)
+		return -ENOMEM;
+
+	hdev->bus = HCI_USB;
+	hci_set_drvdata(hdev, data);
+
+	if (id->driver_info & BTUSB_AMP)
+		hdev->dev_type = HCI_AMP;
+	else
+		hdev->dev_type = HCI_PRIMARY;
+
+	data->hdev = hdev;
+
+	SET_HCIDEV_DEV(hdev, &intf->dev);
+
+	reset_gpio = gpiod_get_optional(&data->udev->dev, "reset",
+					GPIOD_OUT_LOW);
+	if (IS_ERR(reset_gpio)) {
+		err = PTR_ERR(reset_gpio);
+		goto out_free_dev;
+	} else if (reset_gpio) {
+		data->reset_gpio = reset_gpio;
+	}
+
+	hdev->open   = btusb_open;
+	hdev->close  = btusb_close;
+	hdev->flush  = btusb_flush;
+	hdev->send   = btusb_send_frame;
+	hdev->notify = btusb_notify;
+	hdev->wakeup = btusb_wakeup;
+
+#ifdef CONFIG_PM
+	err = btusb_config_oob_wake(hdev);
+	if (err)
+		goto out_free_dev;
+
+	/* Marvell devices may need a specific chip configuration */
+	if (id->driver_info & BTUSB_MARVELL && data->oob_wake_irq) {
+		err = marvell_config_oob_wake(hdev);
+		if (err)
+			goto out_free_dev;
+	}
+#endif
+	if (id->driver_info & BTUSB_CW6622)
+		set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
+
+	if (id->driver_info & BTUSB_BCM2045)
+		set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
+
+	if (id->driver_info & BTUSB_BCM92035)
+		hdev->setup = btusb_setup_bcm92035;
+
+	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) &&
+	    (id->driver_info & BTUSB_BCM_PATCHRAM)) {
+		hdev->manufacturer = 15;
+		hdev->setup = btbcm_setup_patchram;
+		hdev->set_diag = btusb_bcm_set_diag;
+		hdev->set_bdaddr = btbcm_set_bdaddr;
+
+		/* Broadcom LM_DIAG Interface numbers are hardcoded */
+		data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
+	}
+
+	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) &&
+	    (id->driver_info & BTUSB_BCM_APPLE)) {
+		hdev->manufacturer = 15;
+		hdev->setup = btbcm_setup_apple;
+		hdev->set_diag = btusb_bcm_set_diag;
+
+		/* Broadcom LM_DIAG Interface numbers are hardcoded */
+		data->diag = usb_ifnum_to_if(data->udev, ifnum_base + 2);
+	}
+
+	/* Combined Intel Device setup to support multiple setup routine */
+	if (id->driver_info & BTUSB_INTEL_COMBINED) {
+		err = btintel_configure_setup(hdev);
+		if (err)
+			goto out_free_dev;
+
+		/* Transport specific configuration */
+		hdev->send = btusb_send_frame_intel;
+		hdev->cmd_timeout = btusb_intel_cmd_timeout;
+
+		if (id->driver_info & BTUSB_INTEL_NO_WBS_SUPPORT)
+			btintel_set_flag(hdev, INTEL_ROM_LEGACY_NO_WBS_SUPPORT);
+
+		if (id->driver_info & BTUSB_INTEL_BROKEN_INITIAL_NCMD)
+			btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD);
+
+		if (id->driver_info & BTUSB_INTEL_BROKEN_SHUTDOWN_LED)
+			btintel_set_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED);
+	}
+
+	if (id->driver_info & BTUSB_MARVELL)
+		hdev->set_bdaddr = btusb_set_bdaddr_marvell;
+
+	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_MTK) &&
+	    (id->driver_info & BTUSB_MEDIATEK)) {
+		hdev->setup = btusb_mtk_setup;
+		hdev->shutdown = btusb_mtk_shutdown;
+		hdev->manufacturer = 70;
+		hdev->cmd_timeout = btusb_mtk_cmd_timeout;
+		hdev->set_bdaddr = btmtk_set_bdaddr;
+		set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
+		set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+		data->recv_acl = btusb_recv_acl_mtk;
+	}
+
+	if (id->driver_info & BTUSB_SWAVE) {
+		set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
+		set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
+	}
+
+	if (id->driver_info & BTUSB_INTEL_BOOT) {
+		hdev->manufacturer = 2;
+		set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+	}
+
+	if (id->driver_info & BTUSB_ATH3012) {
+		data->setup_on_usb = btusb_setup_qca;
+		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+	}
+
+	if (id->driver_info & BTUSB_QCA_ROME) {
+		data->setup_on_usb = btusb_setup_qca;
+		hdev->shutdown = btusb_shutdown_qca;
+		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
+		hdev->cmd_timeout = btusb_qca_cmd_timeout;
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+		btusb_check_needs_reset_resume(intf);
+	}
+
+	if (id->driver_info & BTUSB_QCA_WCN6855) {
+		data->setup_on_usb = btusb_setup_qca;
+		hdev->shutdown = btusb_shutdown_qca;
+		hdev->set_bdaddr = btusb_set_bdaddr_wcn6855;
+		hdev->cmd_timeout = btusb_qca_cmd_timeout;
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+		hci_set_msft_opcode(hdev, 0xFD70);
+	}
+
+	if (id->driver_info & BTUSB_AMP) {
+		/* AMP controllers do not support SCO packets */
+		data->isoc = NULL;
+	} else {
+		/* Interface orders are hardcoded in the specification */
+		data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
+		data->isoc_ifnum = ifnum_base + 1;
+	}
+
+	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_RTL) &&
+	    (id->driver_info & BTUSB_REALTEK)) {
+		hdev->setup = btrtl_setup_realtek;
+		hdev->shutdown = btrtl_shutdown_realtek;
+		hdev->cmd_timeout = btusb_rtl_cmd_timeout;
+
+		/* Realtek devices need to set remote wakeup on auto-suspend */
+		set_bit(BTUSB_WAKEUP_AUTOSUSPEND, &data->flags);
+		set_bit(BTUSB_USE_ALT3_FOR_WBS, &data->flags);
+	}
+
+	if (id->driver_info & BTUSB_ACTIONS_SEMI) {
+		/* Support is advertised, but not implemented */
+		set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
+		set_bit(HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, &hdev->quirks);
+		set_bit(HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT, &hdev->quirks);
+		set_bit(HCI_QUIRK_BROKEN_EXT_SCAN, &hdev->quirks);
+	}
+
+	if (!reset)
+		set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
+	if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
+		if (!disable_scofix)
+			set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
+	}
+
+	if (id->driver_info & BTUSB_BROKEN_ISOC)
+		data->isoc = NULL;
+
+	if (id->driver_info & BTUSB_WIDEBAND_SPEECH)
+		set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+
+	if (id->driver_info & BTUSB_VALID_LE_STATES)
+		set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+
+	if (id->driver_info & BTUSB_DIGIANSWER) {
+		data->cmdreq_type = USB_TYPE_VENDOR;
+		set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+	}
+
+	if (id->driver_info & BTUSB_CSR) {
+		struct usb_device *udev = data->udev;
+		u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
+
+		/* Old firmware would otherwise execute USB reset */
+		if (bcdDevice < 0x117)
+			set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
+		/* This must be set first in case we disable it for fakes */
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+
+		/* Fake CSR devices with broken commands */
+		if (le16_to_cpu(udev->descriptor.idVendor)  == 0x0a12 &&
+		    le16_to_cpu(udev->descriptor.idProduct) == 0x0001)
+			hdev->setup = btusb_setup_csr;
+	}
+
+	if (id->driver_info & BTUSB_SNIFFER) {
+		struct usb_device *udev = data->udev;
+
+		/* New sniffer firmware has crippled HCI interface */
+		if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
+			set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+	}
+
+	if (id->driver_info & BTUSB_INTEL_BOOT) {
+		/* A bug in the bootloader causes that interrupt interface is
+		 * only enabled after receiving SetInterface(0, AltSetting=0).
+		 */
+		err = usb_set_interface(data->udev, 0, 0);
+		if (err < 0) {
+			BT_ERR("failed to set interface 0, alt 0 %d", err);
+			goto out_free_dev;
+		}
+	}
+
+	if (data->isoc) {
+		err = usb_driver_claim_interface(&btusb_driver,
+						 data->isoc, data);
+		if (err < 0)
+			goto out_free_dev;
+	}
+
+	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_BCM) && data->diag) {
+		if (!usb_driver_claim_interface(&btusb_driver,
+						data->diag, data))
+			__set_diag_interface(hdev);
+		else
+			data->diag = NULL;
+	}
+
+	if (enable_autosuspend)
+		usb_enable_autosuspend(data->udev);
+
+	err = hci_register_dev(hdev);
+	if (err < 0)
+		goto out_free_dev;
+
+	usb_set_intfdata(intf, data);
+
+	debugfs_create_file("force_poll_sync", 0644, hdev->debugfs, data,
+			    &force_poll_sync_fops);
+
+	return 0;
+
+out_free_dev:
+	if (data->reset_gpio)
+		gpiod_put(data->reset_gpio);
+	hci_free_dev(hdev);
+	return err;
+}
+
+static void btusb_disconnect(struct usb_interface *intf)
+{
+	struct btusb_data *data = usb_get_intfdata(intf);
+	struct hci_dev *hdev;
+
+	BT_DBG("intf %p", intf);
+
+	if (!data)
+		return;
+
+	hdev = data->hdev;
+	usb_set_intfdata(data->intf, NULL);
+
+	if (data->isoc)
+		usb_set_intfdata(data->isoc, NULL);
+
+	if (data->diag)
+		usb_set_intfdata(data->diag, NULL);
+
+	hci_unregister_dev(hdev);
+
+	if (intf == data->intf) {
+		if (data->isoc)
+			usb_driver_release_interface(&btusb_driver, data->isoc);
+		if (data->diag)
+			usb_driver_release_interface(&btusb_driver, data->diag);
+	} else if (intf == data->isoc) {
+		if (data->diag)
+			usb_driver_release_interface(&btusb_driver, data->diag);
+		usb_driver_release_interface(&btusb_driver, data->intf);
+	} else if (intf == data->diag) {
+		usb_driver_release_interface(&btusb_driver, data->intf);
+		if (data->isoc)
+			usb_driver_release_interface(&btusb_driver, data->isoc);
+	}
+
+	if (data->oob_wake_irq)
+		device_init_wakeup(&data->udev->dev, false);
+
+	if (data->reset_gpio)
+		gpiod_put(data->reset_gpio);
+
+	hci_free_dev(hdev);
+}
+
+#ifdef CONFIG_PM
+static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct btusb_data *data = usb_get_intfdata(intf);
+
+	BT_DBG("intf %p", intf);
+
+	if (data->suspend_count++)
+		return 0;
+
+	spin_lock_irq(&data->txlock);
+	if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) {
+		set_bit(BTUSB_SUSPENDING, &data->flags);
+		spin_unlock_irq(&data->txlock);
+	} else {
+		spin_unlock_irq(&data->txlock);
+		data->suspend_count--;
+		return -EBUSY;
+	}
+
+	cancel_work_sync(&data->work);
+
+	btusb_stop_traffic(data);
+	usb_kill_anchored_urbs(&data->tx_anchor);
+
+	if (data->oob_wake_irq && device_may_wakeup(&data->udev->dev)) {
+		set_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags);
+		enable_irq_wake(data->oob_wake_irq);
+		enable_irq(data->oob_wake_irq);
+	}
+
+	/* For global suspend, Realtek devices lose the loaded fw
+	 * in them. But for autosuspend, firmware should remain.
+	 * Actually, it depends on whether the usb host sends
+	 * set feature (enable wakeup) or not.
+	 */
+	if (test_bit(BTUSB_WAKEUP_AUTOSUSPEND, &data->flags)) {
+		if (PMSG_IS_AUTO(message) &&
+		    device_can_wakeup(&data->udev->dev))
+			data->udev->do_remote_wakeup = 1;
+		else if (!PMSG_IS_AUTO(message) &&
+			 !device_may_wakeup(&data->udev->dev)) {
+			data->udev->do_remote_wakeup = 0;
+			data->udev->reset_resume = 1;
+		}
+	}
+
+	return 0;
+}
+
+static void play_deferred(struct btusb_data *data)
+{
+	struct urb *urb;
+	int err;
+
+	while ((urb = usb_get_from_anchor(&data->deferred))) {
+		usb_anchor_urb(urb, &data->tx_anchor);
+
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err < 0) {
+			if (err != -EPERM && err != -ENODEV)
+				BT_ERR("%s urb %p submission failed (%d)",
+				       data->hdev->name, urb, -err);
+			kfree(urb->setup_packet);
+			usb_unanchor_urb(urb);
+			usb_free_urb(urb);
+			break;
+		}
+
+		data->tx_in_flight++;
+		usb_free_urb(urb);
+	}
+
+	/* Cleanup the rest deferred urbs. */
+	while ((urb = usb_get_from_anchor(&data->deferred))) {
+		kfree(urb->setup_packet);
+		usb_free_urb(urb);
+	}
+}
+
+static int btusb_resume(struct usb_interface *intf)
+{
+	struct btusb_data *data = usb_get_intfdata(intf);
+	struct hci_dev *hdev = data->hdev;
+	int err = 0;
+
+	BT_DBG("intf %p", intf);
+
+	if (--data->suspend_count)
+		return 0;
+
+	/* Disable only if not already disabled (keep it balanced) */
+	if (test_and_clear_bit(BTUSB_OOB_WAKE_ENABLED, &data->flags)) {
+		disable_irq(data->oob_wake_irq);
+		disable_irq_wake(data->oob_wake_irq);
+	}
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		goto done;
+
+	if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) {
+		err = btusb_submit_intr_urb(hdev, GFP_NOIO);
+		if (err < 0) {
+			clear_bit(BTUSB_INTR_RUNNING, &data->flags);
+			goto failed;
+		}
+	}
+
+	if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) {
+		err = btusb_submit_bulk_urb(hdev, GFP_NOIO);
+		if (err < 0) {
+			clear_bit(BTUSB_BULK_RUNNING, &data->flags);
+			goto failed;
+		}
+
+		btusb_submit_bulk_urb(hdev, GFP_NOIO);
+	}
+
+	if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
+		if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0)
+			clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+		else
+			btusb_submit_isoc_urb(hdev, GFP_NOIO);
+	}
+
+	spin_lock_irq(&data->txlock);
+	play_deferred(data);
+	clear_bit(BTUSB_SUSPENDING, &data->flags);
+	spin_unlock_irq(&data->txlock);
+	schedule_work(&data->work);
+
+	return 0;
+
+failed:
+	usb_scuttle_anchored_urbs(&data->deferred);
+done:
+	spin_lock_irq(&data->txlock);
+	clear_bit(BTUSB_SUSPENDING, &data->flags);
+	spin_unlock_irq(&data->txlock);
+
+	return err;
+}
+#endif
+
+static struct usb_driver btusb_driver = {
+	.name		= "btusb",
+	.probe		= btusb_probe,
+	.disconnect	= btusb_disconnect,
+#ifdef CONFIG_PM
+	.suspend	= btusb_suspend,
+	.resume		= btusb_resume,
+#endif
+	.id_table	= btusb_table,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(btusb_driver);
+
+module_param(disable_scofix, bool, 0644);
+MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
+
+module_param(force_scofix, bool, 0644);
+MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
+
+module_param(enable_autosuspend, bool, 0644);
+MODULE_PARM_DESC(enable_autosuspend, "Enable USB autosuspend by default");
+
+module_param(reset, bool, 0644);
+MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
new file mode 100644
index 000000000..2adfe4fad
--- /dev/null
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -0,0 +1,614 @@
+/*
+ *
+ *  A driver for Nokia Connectivity Card DTL-1 devices
+ *
+ *  Copyright (C) 2001-2002  Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation;
+ *
+ *  Software distributed under the License is distributed on an "AS
+ *  IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *  implied. See the License for the specific language governing
+ *  rights and limitations under the License.
+ *
+ *  The initial developer of the original code is David A. Hinds
+ *  <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
+ *  are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
+#include <linux/moduleparam.h>
+
+#include <linux/skbuff.h>
+#include <linux/string.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+
+
+/* ======================== Module parameters ======================== */
+
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Bluetooth driver for Nokia Connectivity Card DTL-1");
+MODULE_LICENSE("GPL");
+
+
+
+/* ======================== Local structures ======================== */
+
+
+struct dtl1_info {
+	struct pcmcia_device *p_dev;
+
+	struct hci_dev *hdev;
+
+	spinlock_t lock;		/* For serializing operations */
+
+	unsigned long flowmask;		/* HCI flow mask */
+	int ri_latch;
+
+	struct sk_buff_head txq;
+	unsigned long tx_state;
+
+	unsigned long rx_state;
+	unsigned long rx_count;
+	struct sk_buff *rx_skb;
+};
+
+
+static int dtl1_config(struct pcmcia_device *link);
+
+
+/* Transmit states  */
+#define XMIT_SENDING  1
+#define XMIT_WAKEUP   2
+#define XMIT_WAITING  8
+
+/* Receiver States */
+#define RECV_WAIT_NSH   0
+#define RECV_WAIT_DATA  1
+
+
+struct nsh {
+	u8 type;
+	u8 zero;
+	u16 len;
+} __packed;	/* Nokia Specific Header */
+
+#define NSHL  4				/* Nokia Specific Header Length */
+
+
+
+/* ======================== Interrupt handling ======================== */
+
+
+static int dtl1_write(unsigned int iobase, int fifo_size, __u8 *buf, int len)
+{
+	int actual = 0;
+
+	/* Tx FIFO should be empty */
+	if (!(inb(iobase + UART_LSR) & UART_LSR_THRE))
+		return 0;
+
+	/* Fill FIFO with current frame */
+	while ((fifo_size-- > 0) && (actual < len)) {
+		/* Transmit next byte */
+		outb(buf[actual], iobase + UART_TX);
+		actual++;
+	}
+
+	return actual;
+}
+
+
+static void dtl1_write_wakeup(struct dtl1_info *info)
+{
+	if (!info) {
+		BT_ERR("Unknown device");
+		return;
+	}
+
+	if (test_bit(XMIT_WAITING, &(info->tx_state))) {
+		set_bit(XMIT_WAKEUP, &(info->tx_state));
+		return;
+	}
+
+	if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) {
+		set_bit(XMIT_WAKEUP, &(info->tx_state));
+		return;
+	}
+
+	do {
+		unsigned int iobase = info->p_dev->resource[0]->start;
+		register struct sk_buff *skb;
+		int len;
+
+		clear_bit(XMIT_WAKEUP, &(info->tx_state));
+
+		if (!pcmcia_dev_present(info->p_dev))
+			return;
+
+		skb = skb_dequeue(&(info->txq));
+		if (!skb)
+			break;
+
+		/* Send frame */
+		len = dtl1_write(iobase, 32, skb->data, skb->len);
+
+		if (len == skb->len) {
+			set_bit(XMIT_WAITING, &(info->tx_state));
+			kfree_skb(skb);
+		} else {
+			skb_pull(skb, len);
+			skb_queue_head(&(info->txq), skb);
+		}
+
+		info->hdev->stat.byte_tx += len;
+
+	} while (test_bit(XMIT_WAKEUP, &(info->tx_state)));
+
+	clear_bit(XMIT_SENDING, &(info->tx_state));
+}
+
+
+static void dtl1_control(struct dtl1_info *info, struct sk_buff *skb)
+{
+	u8 flowmask = *(u8 *)skb->data;
+	int i;
+
+	printk(KERN_INFO "Bluetooth: Nokia control data =");
+	for (i = 0; i < skb->len; i++)
+		printk(" %02x", skb->data[i]);
+
+	printk("\n");
+
+	/* transition to active state */
+	if (((info->flowmask & 0x07) == 0) && ((flowmask & 0x07) != 0)) {
+		clear_bit(XMIT_WAITING, &(info->tx_state));
+		dtl1_write_wakeup(info);
+	}
+
+	info->flowmask = flowmask;
+
+	kfree_skb(skb);
+}
+
+
+static void dtl1_receive(struct dtl1_info *info)
+{
+	unsigned int iobase;
+	struct nsh *nsh;
+	int boguscount = 0;
+
+	if (!info) {
+		BT_ERR("Unknown device");
+		return;
+	}
+
+	iobase = info->p_dev->resource[0]->start;
+
+	do {
+		info->hdev->stat.byte_rx++;
+
+		/* Allocate packet */
+		if (info->rx_skb == NULL) {
+			info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+			if (!info->rx_skb) {
+				BT_ERR("Can't allocate mem for new packet");
+				info->rx_state = RECV_WAIT_NSH;
+				info->rx_count = NSHL;
+				return;
+			}
+		}
+
+		skb_put_u8(info->rx_skb, inb(iobase + UART_RX));
+		nsh = (struct nsh *)info->rx_skb->data;
+
+		info->rx_count--;
+
+		if (info->rx_count == 0) {
+
+			switch (info->rx_state) {
+			case RECV_WAIT_NSH:
+				info->rx_state = RECV_WAIT_DATA;
+				info->rx_count = nsh->len + (nsh->len & 0x0001);
+				break;
+			case RECV_WAIT_DATA:
+				hci_skb_pkt_type(info->rx_skb) = nsh->type;
+
+				/* remove PAD byte if it exists */
+				if (nsh->len & 0x0001) {
+					info->rx_skb->tail--;
+					info->rx_skb->len--;
+				}
+
+				/* remove NSH */
+				skb_pull(info->rx_skb, NSHL);
+
+				switch (hci_skb_pkt_type(info->rx_skb)) {
+				case 0x80:
+					/* control data for the Nokia Card */
+					dtl1_control(info, info->rx_skb);
+					break;
+				case 0x82:
+				case 0x83:
+				case 0x84:
+					/* send frame to the HCI layer */
+					hci_skb_pkt_type(info->rx_skb) &= 0x0f;
+					hci_recv_frame(info->hdev, info->rx_skb);
+					break;
+				default:
+					/* unknown packet */
+					BT_ERR("Unknown HCI packet with type 0x%02x received",
+					       hci_skb_pkt_type(info->rx_skb));
+					kfree_skb(info->rx_skb);
+					break;
+				}
+
+				info->rx_state = RECV_WAIT_NSH;
+				info->rx_count = NSHL;
+				info->rx_skb = NULL;
+				break;
+			}
+
+		}
+
+		/* Make sure we don't stay here too long */
+		if (boguscount++ > 32)
+			break;
+
+	} while (inb(iobase + UART_LSR) & UART_LSR_DR);
+}
+
+
+static irqreturn_t dtl1_interrupt(int irq, void *dev_inst)
+{
+	struct dtl1_info *info = dev_inst;
+	unsigned int iobase;
+	unsigned char msr;
+	int boguscount = 0;
+	int iir, lsr;
+	irqreturn_t r = IRQ_NONE;
+
+	if (!info || !info->hdev)
+		/* our irq handler is shared */
+		return IRQ_NONE;
+
+	iobase = info->p_dev->resource[0]->start;
+
+	spin_lock(&(info->lock));
+
+	iir = inb(iobase + UART_IIR) & UART_IIR_ID;
+	while (iir) {
+
+		r = IRQ_HANDLED;
+		/* Clear interrupt */
+		lsr = inb(iobase + UART_LSR);
+
+		switch (iir) {
+		case UART_IIR_RLSI:
+			BT_ERR("RLSI");
+			break;
+		case UART_IIR_RDI:
+			/* Receive interrupt */
+			dtl1_receive(info);
+			break;
+		case UART_IIR_THRI:
+			if (lsr & UART_LSR_THRE) {
+				/* Transmitter ready for data */
+				dtl1_write_wakeup(info);
+			}
+			break;
+		default:
+			BT_ERR("Unhandled IIR=%#x", iir);
+			break;
+		}
+
+		/* Make sure we don't stay here too long */
+		if (boguscount++ > 100)
+			break;
+
+		iir = inb(iobase + UART_IIR) & UART_IIR_ID;
+
+	}
+
+	msr = inb(iobase + UART_MSR);
+
+	if (info->ri_latch ^ (msr & UART_MSR_RI)) {
+		info->ri_latch = msr & UART_MSR_RI;
+		clear_bit(XMIT_WAITING, &(info->tx_state));
+		dtl1_write_wakeup(info);
+		r = IRQ_HANDLED;
+	}
+
+	spin_unlock(&(info->lock));
+
+	return r;
+}
+
+
+
+/* ======================== HCI interface ======================== */
+
+
+static int dtl1_hci_open(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+
+static int dtl1_hci_flush(struct hci_dev *hdev)
+{
+	struct dtl1_info *info = hci_get_drvdata(hdev);
+
+	/* Drop TX queue */
+	skb_queue_purge(&(info->txq));
+
+	return 0;
+}
+
+
+static int dtl1_hci_close(struct hci_dev *hdev)
+{
+	dtl1_hci_flush(hdev);
+
+	return 0;
+}
+
+
+static int dtl1_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct dtl1_info *info = hci_get_drvdata(hdev);
+	struct sk_buff *s;
+	struct nsh nsh;
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		nsh.type = 0x81;
+		break;
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		nsh.type = 0x82;
+		break;
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		nsh.type = 0x83;
+		break;
+	default:
+		return -EILSEQ;
+	}
+
+	nsh.zero = 0;
+	nsh.len = skb->len;
+
+	s = bt_skb_alloc(NSHL + skb->len + 1, GFP_ATOMIC);
+	if (!s)
+		return -ENOMEM;
+
+	skb_reserve(s, NSHL);
+	skb_copy_from_linear_data(skb, skb_put(s, skb->len), skb->len);
+	if (skb->len & 0x0001)
+		skb_put_u8(s, 0);	/* PAD */
+
+	/* Prepend skb with Nokia frame header and queue */
+	memcpy(skb_push(s, NSHL), &nsh, NSHL);
+	skb_queue_tail(&(info->txq), s);
+
+	dtl1_write_wakeup(info);
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
+
+
+/* ======================== Card services HCI interaction ======================== */
+
+
+static int dtl1_open(struct dtl1_info *info)
+{
+	unsigned long flags;
+	unsigned int iobase = info->p_dev->resource[0]->start;
+	struct hci_dev *hdev;
+
+	spin_lock_init(&(info->lock));
+
+	skb_queue_head_init(&(info->txq));
+
+	info->rx_state = RECV_WAIT_NSH;
+	info->rx_count = NSHL;
+	info->rx_skb = NULL;
+
+	set_bit(XMIT_WAITING, &(info->tx_state));
+
+	/* Initialize HCI device */
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Can't allocate HCI device");
+		return -ENOMEM;
+	}
+
+	info->hdev = hdev;
+
+	hdev->bus = HCI_PCCARD;
+	hci_set_drvdata(hdev, info);
+	SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
+
+	hdev->open  = dtl1_hci_open;
+	hdev->close = dtl1_hci_close;
+	hdev->flush = dtl1_hci_flush;
+	hdev->send  = dtl1_hci_send_frame;
+
+	spin_lock_irqsave(&(info->lock), flags);
+
+	/* Reset UART */
+	outb(0, iobase + UART_MCR);
+
+	/* Turn off interrupts */
+	outb(0, iobase + UART_IER);
+
+	/* Initialize UART */
+	outb(UART_LCR_WLEN8, iobase + UART_LCR);	/* Reset DLAB */
+	outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR);
+
+	info->ri_latch = inb(info->p_dev->resource[0]->start + UART_MSR)
+				& UART_MSR_RI;
+
+	/* Turn on interrupts */
+	outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
+
+	spin_unlock_irqrestore(&(info->lock), flags);
+
+	/* Timeout before it is safe to send the first HCI packet */
+	msleep(2000);
+
+	/* Register HCI device */
+	if (hci_register_dev(hdev) < 0) {
+		BT_ERR("Can't register HCI device");
+		info->hdev = NULL;
+		hci_free_dev(hdev);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+
+static int dtl1_close(struct dtl1_info *info)
+{
+	unsigned long flags;
+	unsigned int iobase = info->p_dev->resource[0]->start;
+	struct hci_dev *hdev = info->hdev;
+
+	if (!hdev)
+		return -ENODEV;
+
+	dtl1_hci_close(hdev);
+
+	spin_lock_irqsave(&(info->lock), flags);
+
+	/* Reset UART */
+	outb(0, iobase + UART_MCR);
+
+	/* Turn off interrupts */
+	outb(0, iobase + UART_IER);
+
+	spin_unlock_irqrestore(&(info->lock), flags);
+
+	hci_unregister_dev(hdev);
+	hci_free_dev(hdev);
+
+	return 0;
+}
+
+static int dtl1_probe(struct pcmcia_device *link)
+{
+	struct dtl1_info *info;
+
+	/* Create new info device */
+	info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->p_dev = link;
+	link->priv = info;
+
+	link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+
+	return dtl1_config(link);
+}
+
+
+static void dtl1_detach(struct pcmcia_device *link)
+{
+	struct dtl1_info *info = link->priv;
+
+	dtl1_close(info);
+	pcmcia_disable_device(link);
+}
+
+static int dtl1_confcheck(struct pcmcia_device *p_dev, void *priv_data)
+{
+	if ((p_dev->resource[1]->end) || (p_dev->resource[1]->end < 8))
+		return -ENODEV;
+
+	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+
+	return pcmcia_request_io(p_dev);
+}
+
+static int dtl1_config(struct pcmcia_device *link)
+{
+	struct dtl1_info *info = link->priv;
+	int ret;
+
+	/* Look for a generic full-sized window */
+	link->resource[0]->end = 8;
+	ret = pcmcia_loop_config(link, dtl1_confcheck, NULL);
+	if (ret)
+		goto failed;
+
+	ret = pcmcia_request_irq(link, dtl1_interrupt);
+	if (ret)
+		goto failed;
+
+	ret = pcmcia_enable_device(link);
+	if (ret)
+		goto failed;
+
+	ret = dtl1_open(info);
+	if (ret)
+		goto failed;
+
+	return 0;
+
+failed:
+	dtl1_detach(link);
+	return ret;
+}
+
+static const struct pcmcia_device_id dtl1_ids[] = {
+	PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-1", 0xe1bfdd64, 0xe168480d),
+	PCMCIA_DEVICE_PROD_ID12("Nokia Mobile Phones", "DTL-4", 0xe1bfdd64, 0x9102bc82),
+	PCMCIA_DEVICE_PROD_ID12("Socket", "CF", 0xb38bcc2e, 0x44ebf863),
+	PCMCIA_DEVICE_PROD_ID12("Socket", "CF+ Personal Network Card", 0xb38bcc2e, 0xe732bae3),
+	PCMCIA_DEVICE_NULL
+};
+MODULE_DEVICE_TABLE(pcmcia, dtl1_ids);
+
+static struct pcmcia_driver dtl1_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "dtl1_cs",
+	.probe		= dtl1_probe,
+	.remove		= dtl1_detach,
+	.id_table	= dtl1_ids,
+};
+module_pcmcia_driver(dtl1_driver);
diff --git a/drivers/bluetooth/h4_recv.h b/drivers/bluetooth/h4_recv.h
new file mode 100644
index 000000000..4f2c89742
--- /dev/null
+++ b/drivers/bluetooth/h4_recv.h
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *
+ *  Generic Bluetooth HCI UART driver
+ *
+ *  Copyright (C) 2015-2018  Intel Corporation
+ */
+
+#include <asm/unaligned.h>
+
+struct h4_recv_pkt {
+	u8  type;	/* Packet type */
+	u8  hlen;	/* Header length */
+	u8  loff;	/* Data length offset in header */
+	u8  lsize;	/* Data length field size */
+	u16 maxlen;	/* Max overall packet length */
+	int (*recv)(struct hci_dev *hdev, struct sk_buff *skb);
+};
+
+#define H4_RECV_ACL \
+	.type = HCI_ACLDATA_PKT, \
+	.hlen = HCI_ACL_HDR_SIZE, \
+	.loff = 2, \
+	.lsize = 2, \
+	.maxlen = HCI_MAX_FRAME_SIZE \
+
+#define H4_RECV_SCO \
+	.type = HCI_SCODATA_PKT, \
+	.hlen = HCI_SCO_HDR_SIZE, \
+	.loff = 2, \
+	.lsize = 1, \
+	.maxlen = HCI_MAX_SCO_SIZE
+
+#define H4_RECV_EVENT \
+	.type = HCI_EVENT_PKT, \
+	.hlen = HCI_EVENT_HDR_SIZE, \
+	.loff = 1, \
+	.lsize = 1, \
+	.maxlen = HCI_MAX_EVENT_SIZE
+
+static inline struct sk_buff *h4_recv_buf(struct hci_dev *hdev,
+					  struct sk_buff *skb,
+					  const unsigned char *buffer,
+					  int count,
+					  const struct h4_recv_pkt *pkts,
+					  int pkts_count)
+{
+	/* Check for error from previous call */
+	if (IS_ERR(skb))
+		skb = NULL;
+
+	while (count) {
+		int i, len;
+
+		if (!skb) {
+			for (i = 0; i < pkts_count; i++) {
+				if (buffer[0] != (&pkts[i])->type)
+					continue;
+
+				skb = bt_skb_alloc((&pkts[i])->maxlen,
+						   GFP_ATOMIC);
+				if (!skb)
+					return ERR_PTR(-ENOMEM);
+
+				hci_skb_pkt_type(skb) = (&pkts[i])->type;
+				hci_skb_expect(skb) = (&pkts[i])->hlen;
+				break;
+			}
+
+			/* Check for invalid packet type */
+			if (!skb)
+				return ERR_PTR(-EILSEQ);
+
+			count -= 1;
+			buffer += 1;
+		}
+
+		len = min_t(uint, hci_skb_expect(skb) - skb->len, count);
+		skb_put_data(skb, buffer, len);
+
+		count -= len;
+		buffer += len;
+
+		/* Check for partial packet */
+		if (skb->len < hci_skb_expect(skb))
+			continue;
+
+		for (i = 0; i < pkts_count; i++) {
+			if (hci_skb_pkt_type(skb) == (&pkts[i])->type)
+				break;
+		}
+
+		if (i >= pkts_count) {
+			kfree_skb(skb);
+			return ERR_PTR(-EILSEQ);
+		}
+
+		if (skb->len == (&pkts[i])->hlen) {
+			u16 dlen;
+
+			switch ((&pkts[i])->lsize) {
+			case 0:
+				/* No variable data length */
+				dlen = 0;
+				break;
+			case 1:
+				/* Single octet variable length */
+				dlen = skb->data[(&pkts[i])->loff];
+				hci_skb_expect(skb) += dlen;
+
+				if (skb_tailroom(skb) < dlen) {
+					kfree_skb(skb);
+					return ERR_PTR(-EMSGSIZE);
+				}
+				break;
+			case 2:
+				/* Double octet variable length */
+				dlen = get_unaligned_le16(skb->data +
+							  (&pkts[i])->loff);
+				hci_skb_expect(skb) += dlen;
+
+				if (skb_tailroom(skb) < dlen) {
+					kfree_skb(skb);
+					return ERR_PTR(-EMSGSIZE);
+				}
+				break;
+			default:
+				/* Unsupported variable length */
+				kfree_skb(skb);
+				return ERR_PTR(-EILSEQ);
+			}
+
+			if (!dlen) {
+				/* No more data, complete frame */
+				(&pkts[i])->recv(hdev, skb);
+				skb = NULL;
+			}
+		} else {
+			/* Complete frame */
+			(&pkts[i])->recv(hdev, skb);
+			skb = NULL;
+		}
+	}
+
+	return skb;
+}
diff --git a/drivers/bluetooth/hci_ag6xx.c b/drivers/bluetooth/hci_ag6xx.c
new file mode 100644
index 000000000..2d4030240
--- /dev/null
+++ b/drivers/bluetooth/hci_ag6xx.c
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Bluetooth HCI UART driver for Intel/AG6xx devices
+ *
+ *  Copyright (C) 2016  Intel Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+#include "btintel.h"
+
+struct ag6xx_data {
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+};
+
+struct pbn_entry {
+	__le32 addr;
+	__le32 plen;
+	__u8 data[];
+} __packed;
+
+static int ag6xx_open(struct hci_uart *hu)
+{
+	struct ag6xx_data *ag6xx;
+
+	BT_DBG("hu %p", hu);
+
+	ag6xx = kzalloc(sizeof(*ag6xx), GFP_KERNEL);
+	if (!ag6xx)
+		return -ENOMEM;
+
+	skb_queue_head_init(&ag6xx->txq);
+
+	hu->priv = ag6xx;
+	return 0;
+}
+
+static int ag6xx_close(struct hci_uart *hu)
+{
+	struct ag6xx_data *ag6xx = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&ag6xx->txq);
+	kfree_skb(ag6xx->rx_skb);
+	kfree(ag6xx);
+
+	hu->priv = NULL;
+	return 0;
+}
+
+static int ag6xx_flush(struct hci_uart *hu)
+{
+	struct ag6xx_data *ag6xx = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&ag6xx->txq);
+	return 0;
+}
+
+static struct sk_buff *ag6xx_dequeue(struct hci_uart *hu)
+{
+	struct ag6xx_data *ag6xx = hu->priv;
+	struct sk_buff *skb;
+
+	skb = skb_dequeue(&ag6xx->txq);
+	if (!skb)
+		return skb;
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
+	return skb;
+}
+
+static int ag6xx_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct ag6xx_data *ag6xx = hu->priv;
+
+	skb_queue_tail(&ag6xx->txq, skb);
+	return 0;
+}
+
+static const struct h4_recv_pkt ag6xx_recv_pkts[] = {
+	{ H4_RECV_ACL,    .recv = hci_recv_frame   },
+	{ H4_RECV_SCO,    .recv = hci_recv_frame   },
+	{ H4_RECV_EVENT,  .recv = hci_recv_frame   },
+};
+
+static int ag6xx_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct ag6xx_data *ag6xx = hu->priv;
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	ag6xx->rx_skb = h4_recv_buf(hu->hdev, ag6xx->rx_skb, data, count,
+				    ag6xx_recv_pkts,
+				    ARRAY_SIZE(ag6xx_recv_pkts));
+	if (IS_ERR(ag6xx->rx_skb)) {
+		int err = PTR_ERR(ag6xx->rx_skb);
+		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+		ag6xx->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
+static int intel_mem_write(struct hci_dev *hdev, u32 addr, u32 plen,
+			   const void *data)
+{
+	/* Can write a maximum of 247 bytes per HCI command.
+	 * HCI cmd Header (3), Intel mem write header (6), data (247).
+	 */
+	while (plen > 0) {
+		struct sk_buff *skb;
+		u8 cmd_param[253], fragment_len = (plen > 247) ? 247 : plen;
+		__le32 leaddr = cpu_to_le32(addr);
+
+		memcpy(cmd_param, &leaddr, 4);
+		cmd_param[4] = 0;
+		cmd_param[5] = fragment_len;
+		memcpy(cmd_param + 6, data, fragment_len);
+
+		skb = __hci_cmd_sync(hdev, 0xfc8e, fragment_len + 6, cmd_param,
+				     HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb))
+			return PTR_ERR(skb);
+		kfree_skb(skb);
+
+		plen -= fragment_len;
+		data += fragment_len;
+		addr += fragment_len;
+	}
+
+	return 0;
+}
+
+static int ag6xx_setup(struct hci_uart *hu)
+{
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+	struct intel_version ver;
+	const struct firmware *fw;
+	const u8 *fw_ptr;
+	char fwname[64];
+	bool patched = false;
+	int err;
+
+	hu->hdev->set_diag = btintel_set_diag;
+	hu->hdev->set_bdaddr = btintel_set_bdaddr;
+
+	err = btintel_enter_mfg(hdev);
+	if (err)
+		return err;
+
+	err = btintel_read_version(hdev, &ver);
+	if (err)
+		return err;
+
+	btintel_version_info(hdev, &ver);
+
+	/* The hardware platform number has a fixed value of 0x37 and
+	 * for now only accept this single value.
+	 */
+	if (ver.hw_platform != 0x37) {
+		bt_dev_err(hdev, "Unsupported Intel hardware platform: 0x%X",
+			   ver.hw_platform);
+		return -EINVAL;
+	}
+
+	/* Only the hardware variant iBT 2.1 (AG6XX) is supported by this
+	 * firmware setup method.
+	 */
+	if (ver.hw_variant != 0x0a) {
+		bt_dev_err(hdev, "Unsupported Intel hardware variant: 0x%x",
+			   ver.hw_variant);
+		return -EINVAL;
+	}
+
+	snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bddata",
+		 ver.hw_platform, ver.hw_variant);
+
+	err = request_firmware(&fw, fwname, &hdev->dev);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to open Intel bddata file: %s (%d)",
+			   fwname, err);
+		goto patch;
+	}
+
+	bt_dev_info(hdev, "Applying bddata (%s)", fwname);
+
+	skb = __hci_cmd_sync_ev(hdev, 0xfc2f, fw->size, fw->data,
+				HCI_EV_CMD_STATUS, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Applying bddata failed (%ld)", PTR_ERR(skb));
+		release_firmware(fw);
+		return PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	release_firmware(fw);
+
+patch:
+	/* If there is no applied patch, fw_patch_num is always 0x00. In other
+	 * cases, current firmware is already patched. No need to patch it.
+	 */
+	if (ver.fw_patch_num) {
+		bt_dev_info(hdev, "Device is already patched. patch num: %02x",
+			    ver.fw_patch_num);
+		patched = true;
+		goto complete;
+	}
+
+	snprintf(fwname, sizeof(fwname),
+		 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.pbn",
+		 ver.hw_platform, ver.hw_variant, ver.hw_revision,
+		 ver.fw_variant,  ver.fw_revision, ver.fw_build_num,
+		 ver.fw_build_ww, ver.fw_build_yy);
+
+	err = request_firmware(&fw, fwname, &hdev->dev);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to open Intel patch file: %s(%d)",
+			   fwname, err);
+		goto complete;
+	}
+	fw_ptr = fw->data;
+
+	bt_dev_info(hdev, "Patching firmware file (%s)", fwname);
+
+	/* PBN patch file contains a list of binary patches to be applied on top
+	 * of the embedded firmware. Each patch entry header contains the target
+	 * address and patch size.
+	 *
+	 * Patch entry:
+	 * | addr(le) | patch_len(le) | patch_data |
+	 * | 4 Bytes  |    4 Bytes    |   n Bytes  |
+	 *
+	 * PBN file is terminated by a patch entry whose address is 0xffffffff.
+	 */
+	while (fw->size > fw_ptr - fw->data) {
+		struct pbn_entry *pbn = (void *)fw_ptr;
+		u32 addr, plen;
+
+		if (pbn->addr == 0xffffffff) {
+			bt_dev_info(hdev, "Patching complete");
+			patched = true;
+			break;
+		}
+
+		addr = le32_to_cpu(pbn->addr);
+		plen = le32_to_cpu(pbn->plen);
+
+		if (fw->data + fw->size <= pbn->data + plen) {
+			bt_dev_info(hdev, "Invalid patch len (%d)", plen);
+			break;
+		}
+
+		bt_dev_info(hdev, "Patching %td/%zu", (fw_ptr - fw->data),
+			    fw->size);
+
+		err = intel_mem_write(hdev, addr, plen, pbn->data);
+		if (err) {
+			bt_dev_err(hdev, "Patching failed");
+			break;
+		}
+
+		fw_ptr = pbn->data + plen;
+	}
+
+	release_firmware(fw);
+
+complete:
+	/* Exit manufacturing mode and reset */
+	err = btintel_exit_mfg(hdev, true, patched);
+	if (err)
+		return err;
+
+	/* Set the event mask for Intel specific vendor events. This enables
+	 * a few extra events that are useful during general operation.
+	 */
+	btintel_set_event_mask_mfg(hdev, false);
+
+	btintel_check_bdaddr(hdev);
+	return 0;
+}
+
+static const struct hci_uart_proto ag6xx_proto = {
+	.id		= HCI_UART_AG6XX,
+	.name		= "AG6XX",
+	.manufacturer	= 2,
+	.open		= ag6xx_open,
+	.close		= ag6xx_close,
+	.flush		= ag6xx_flush,
+	.setup		= ag6xx_setup,
+	.recv		= ag6xx_recv,
+	.enqueue	= ag6xx_enqueue,
+	.dequeue	= ag6xx_dequeue,
+};
+
+int __init ag6xx_init(void)
+{
+	return hci_uart_register_proto(&ag6xx_proto);
+}
+
+int __exit ag6xx_deinit(void)
+{
+	return hci_uart_unregister_proto(&ag6xx_proto);
+}
diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c
new file mode 100644
index 000000000..dbfe34664
--- /dev/null
+++ b/drivers/bluetooth/hci_ath.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Atheros Communication Bluetooth HCIATH3K UART protocol
+ *
+ *  HCIATH3K (HCI Atheros AR300x Protocol) is a Atheros Communication's
+ *  power management protocol extension to H4 to support AR300x Bluetooth Chip.
+ *
+ *  Copyright (c) 2009-2010 Atheros Communications Inc.
+ *
+ *  Acknowledgements:
+ *  This file is based on hci_h4.c, which was written
+ *  by Maxim Krasnyansky and Marcel Holtmann.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/ioctl.h>
+#include <linux/skbuff.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+
+struct ath_struct {
+	struct hci_uart *hu;
+	unsigned int cur_sleep;
+
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+	struct work_struct ctxtsw;
+};
+
+#define OP_WRITE_TAG	0x01
+
+#define INDEX_BDADDR	0x01
+
+struct ath_vendor_cmd {
+	__u8 opcode;
+	__le16 index;
+	__u8 len;
+	__u8 data[251];
+} __packed;
+
+static int ath_wakeup_ar3k(struct tty_struct *tty)
+{
+	int status = tty->driver->ops->tiocmget(tty);
+
+	if (status & TIOCM_CTS)
+		return status;
+
+	/* Clear RTS first */
+	tty->driver->ops->tiocmget(tty);
+	tty->driver->ops->tiocmset(tty, 0x00, TIOCM_RTS);
+	msleep(20);
+
+	/* Set RTS, wake up board */
+	tty->driver->ops->tiocmget(tty);
+	tty->driver->ops->tiocmset(tty, TIOCM_RTS, 0x00);
+	msleep(20);
+
+	status = tty->driver->ops->tiocmget(tty);
+	return status;
+}
+
+static void ath_hci_uart_work(struct work_struct *work)
+{
+	int status;
+	struct ath_struct *ath;
+	struct hci_uart *hu;
+	struct tty_struct *tty;
+
+	ath = container_of(work, struct ath_struct, ctxtsw);
+
+	hu = ath->hu;
+	tty = hu->tty;
+
+	/* verify and wake up controller */
+	if (ath->cur_sleep) {
+		status = ath_wakeup_ar3k(tty);
+		if (!(status & TIOCM_CTS))
+			return;
+	}
+
+	/* Ready to send Data */
+	clear_bit(HCI_UART_SENDING, &hu->tx_state);
+	hci_uart_tx_wakeup(hu);
+}
+
+static int ath_open(struct hci_uart *hu)
+{
+	struct ath_struct *ath;
+
+	BT_DBG("hu %p", hu);
+
+	if (!hci_uart_has_flow_control(hu))
+		return -EOPNOTSUPP;
+
+	ath = kzalloc(sizeof(*ath), GFP_KERNEL);
+	if (!ath)
+		return -ENOMEM;
+
+	skb_queue_head_init(&ath->txq);
+
+	hu->priv = ath;
+	ath->hu = hu;
+
+	INIT_WORK(&ath->ctxtsw, ath_hci_uart_work);
+
+	return 0;
+}
+
+static int ath_close(struct hci_uart *hu)
+{
+	struct ath_struct *ath = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&ath->txq);
+
+	kfree_skb(ath->rx_skb);
+
+	cancel_work_sync(&ath->ctxtsw);
+
+	hu->priv = NULL;
+	kfree(ath);
+
+	return 0;
+}
+
+static int ath_flush(struct hci_uart *hu)
+{
+	struct ath_struct *ath = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&ath->txq);
+
+	return 0;
+}
+
+static int ath_vendor_cmd(struct hci_dev *hdev, uint8_t opcode, uint16_t index,
+			  const void *data, size_t dlen)
+{
+	struct sk_buff *skb;
+	struct ath_vendor_cmd cmd;
+
+	if (dlen > sizeof(cmd.data))
+		return -EINVAL;
+
+	cmd.opcode = opcode;
+	cmd.index = cpu_to_le16(index);
+	cmd.len = dlen;
+	memcpy(cmd.data, data, dlen);
+
+	skb = __hci_cmd_sync(hdev, 0xfc0b, dlen + 4, &cmd, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int ath_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	return ath_vendor_cmd(hdev, OP_WRITE_TAG, INDEX_BDADDR, bdaddr,
+			      sizeof(*bdaddr));
+}
+
+static int ath_setup(struct hci_uart *hu)
+{
+	BT_DBG("hu %p", hu);
+
+	hu->hdev->set_bdaddr = ath_set_bdaddr;
+
+	return 0;
+}
+
+static const struct h4_recv_pkt ath_recv_pkts[] = {
+	{ H4_RECV_ACL,   .recv = hci_recv_frame },
+	{ H4_RECV_SCO,   .recv = hci_recv_frame },
+	{ H4_RECV_EVENT, .recv = hci_recv_frame },
+};
+
+static int ath_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct ath_struct *ath = hu->priv;
+
+	ath->rx_skb = h4_recv_buf(hu->hdev, ath->rx_skb, data, count,
+				  ath_recv_pkts, ARRAY_SIZE(ath_recv_pkts));
+	if (IS_ERR(ath->rx_skb)) {
+		int err = PTR_ERR(ath->rx_skb);
+		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+		ath->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
+#define HCI_OP_ATH_SLEEP 0xFC04
+
+static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct ath_struct *ath = hu->priv;
+
+	if (hci_skb_pkt_type(skb) == HCI_SCODATA_PKT) {
+		kfree_skb(skb);
+		return 0;
+	}
+
+	/* Update power management enable flag with parameters of
+	 * HCI sleep enable vendor specific HCI command.
+	 */
+	if (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT) {
+		struct hci_command_hdr *hdr = (void *)skb->data;
+
+		if (__le16_to_cpu(hdr->opcode) == HCI_OP_ATH_SLEEP)
+			ath->cur_sleep = skb->data[HCI_COMMAND_HDR_SIZE];
+	}
+
+	BT_DBG("hu %p skb %p", hu, skb);
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+
+	skb_queue_tail(&ath->txq, skb);
+	set_bit(HCI_UART_SENDING, &hu->tx_state);
+
+	schedule_work(&ath->ctxtsw);
+
+	return 0;
+}
+
+static struct sk_buff *ath_dequeue(struct hci_uart *hu)
+{
+	struct ath_struct *ath = hu->priv;
+
+	return skb_dequeue(&ath->txq);
+}
+
+static const struct hci_uart_proto athp = {
+	.id		= HCI_UART_ATH3K,
+	.name		= "ATH3K",
+	.manufacturer	= 69,
+	.open		= ath_open,
+	.close		= ath_close,
+	.flush		= ath_flush,
+	.setup		= ath_setup,
+	.recv		= ath_recv,
+	.enqueue	= ath_enqueue,
+	.dequeue	= ath_dequeue,
+};
+
+int __init ath_init(void)
+{
+	return hci_uart_register_proto(&athp);
+}
+
+int __exit ath_deinit(void)
+{
+	return hci_uart_unregister_proto(&athp);
+}
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
new file mode 100644
index 000000000..2b6c0e192
--- /dev/null
+++ b/drivers/bluetooth/hci_bcm.c
@@ -0,0 +1,1614 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Bluetooth HCI UART driver for Broadcom devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/property.h>
+#include <linux/platform_data/x86/apple.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
+#include <linux/tty.h>
+#include <linux/interrupt.h>
+#include <linux/dmi.h>
+#include <linux/pm_runtime.h>
+#include <linux/serdev.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btbcm.h"
+#include "hci_uart.h"
+
+#define BCM_NULL_PKT 0x00
+#define BCM_NULL_SIZE 0
+
+#define BCM_LM_DIAG_PKT 0x07
+#define BCM_LM_DIAG_SIZE 63
+
+#define BCM_TYPE49_PKT 0x31
+#define BCM_TYPE49_SIZE 0
+
+#define BCM_TYPE52_PKT 0x34
+#define BCM_TYPE52_SIZE 0
+
+#define BCM_AUTOSUSPEND_DELAY	5000 /* default autosleep delay */
+
+#define BCM_NUM_SUPPLIES 2
+
+/**
+ * struct bcm_device_data - device specific data
+ * @no_early_set_baudrate: Disallow set baudrate before driver setup()
+ * @drive_rts_on_open: drive RTS signal on ->open() when platform requires it
+ * @no_uart_clock_set: UART clock set command for >3Mbps mode is unavailable
+ * @max_autobaud_speed: max baudrate supported by device in autobaud mode
+ */
+struct bcm_device_data {
+	bool	no_early_set_baudrate;
+	bool	drive_rts_on_open;
+	bool	no_uart_clock_set;
+	u32	max_autobaud_speed;
+};
+
+/**
+ * struct bcm_device - device driver resources
+ * @serdev_hu: HCI UART controller struct
+ * @list: bcm_device_list node
+ * @dev: physical UART slave
+ * @name: device name logged by bt_dev_*() functions
+ * @device_wakeup: BT_WAKE pin,
+ *	assert = Bluetooth device must wake up or remain awake,
+ *	deassert = Bluetooth device may sleep when sleep criteria are met
+ * @shutdown: BT_REG_ON pin,
+ *	power up or power down Bluetooth device internal regulators
+ * @reset: BT_RST_N pin,
+ *	active low resets the Bluetooth logic core
+ * @set_device_wakeup: callback to toggle BT_WAKE pin
+ *	either by accessing @device_wakeup or by calling @btlp
+ * @set_shutdown: callback to toggle BT_REG_ON pin
+ *	either by accessing @shutdown or by calling @btpu/@btpd
+ * @btlp: Apple ACPI method to toggle BT_WAKE pin ("Bluetooth Low Power")
+ * @btpu: Apple ACPI method to drive BT_REG_ON pin high ("Bluetooth Power Up")
+ * @btpd: Apple ACPI method to drive BT_REG_ON pin low ("Bluetooth Power Down")
+ * @gpio_count: internal counter for GPIO resources associated with ACPI device
+ * @gpio_int_idx: index in _CRS for GpioInt() resource
+ * @txco_clk: external reference frequency clock used by Bluetooth device
+ * @lpo_clk: external LPO clock used by Bluetooth device
+ * @supplies: VBAT and VDDIO supplies used by Bluetooth device
+ * @res_enabled: whether clocks and supplies are prepared and enabled
+ * @init_speed: default baudrate of Bluetooth device;
+ *	the host UART is initially set to this baudrate so that
+ *	it can configure the Bluetooth device for @oper_speed
+ * @oper_speed: preferred baudrate of Bluetooth device;
+ *	set to 0 if @init_speed is already the preferred baudrate
+ * @irq: interrupt triggered by HOST_WAKE_BT pin
+ * @irq_active_low: whether @irq is active low
+ * @irq_acquired: flag to show if IRQ handler has been assigned
+ * @hu: pointer to HCI UART controller struct,
+ *	used to disable flow control during runtime suspend and system sleep
+ * @is_suspended: whether flow control is currently disabled
+ * @no_early_set_baudrate: don't set_baudrate before setup()
+ * @drive_rts_on_open: drive RTS signal on ->open() when platform requires it
+ * @no_uart_clock_set: UART clock set command for >3Mbps mode is unavailable
+ * @pcm_int_params: keep the initial PCM configuration
+ * @use_autobaud_mode: start Bluetooth device in autobaud mode
+ * @max_autobaud_speed: max baudrate supported by device in autobaud mode
+ */
+struct bcm_device {
+	/* Must be the first member, hci_serdev.c expects this. */
+	struct hci_uart		serdev_hu;
+	struct list_head	list;
+
+	struct device		*dev;
+
+	const char		*name;
+	struct gpio_desc	*device_wakeup;
+	struct gpio_desc	*shutdown;
+	struct gpio_desc	*reset;
+	int			(*set_device_wakeup)(struct bcm_device *, bool);
+	int			(*set_shutdown)(struct bcm_device *, bool);
+#ifdef CONFIG_ACPI
+	acpi_handle		btlp, btpu, btpd;
+	int			gpio_count;
+	int			gpio_int_idx;
+#endif
+
+	struct clk		*txco_clk;
+	struct clk		*lpo_clk;
+	struct regulator_bulk_data supplies[BCM_NUM_SUPPLIES];
+	bool			res_enabled;
+
+	u32			init_speed;
+	u32			oper_speed;
+	int			irq;
+	bool			irq_active_low;
+	bool			irq_acquired;
+
+#ifdef CONFIG_PM
+	struct hci_uart		*hu;
+	bool			is_suspended;
+#endif
+	bool			no_early_set_baudrate;
+	bool			drive_rts_on_open;
+	bool			no_uart_clock_set;
+	bool			use_autobaud_mode;
+	u8			pcm_int_params[5];
+	u32			max_autobaud_speed;
+};
+
+/* generic bcm uart resources */
+struct bcm_data {
+	struct sk_buff		*rx_skb;
+	struct sk_buff_head	txq;
+
+	struct bcm_device	*dev;
+};
+
+/* List of BCM BT UART devices */
+static DEFINE_MUTEX(bcm_device_lock);
+static LIST_HEAD(bcm_device_list);
+
+static int irq_polarity = -1;
+module_param(irq_polarity, int, 0444);
+MODULE_PARM_DESC(irq_polarity, "IRQ polarity 0: active-high 1: active-low");
+
+static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+	if (hu->serdev)
+		serdev_device_set_baudrate(hu->serdev, speed);
+	else
+		hci_uart_set_baudrate(hu, speed);
+}
+
+static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+	struct hci_dev *hdev = hu->hdev;
+	struct bcm_data *bcm = hu->priv;
+	struct sk_buff *skb;
+	struct bcm_update_uart_baud_rate param;
+
+	if (speed > 3000000 && !bcm->dev->no_uart_clock_set) {
+		struct bcm_write_uart_clock_setting clock;
+
+		clock.type = BCM_UART_CLOCK_48MHZ;
+
+		bt_dev_dbg(hdev, "Set Controller clock (%d)", clock.type);
+
+		/* This Broadcom specific command changes the UART's controller
+		 * clock for baud rate > 3000000.
+		 */
+		skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			int err = PTR_ERR(skb);
+			bt_dev_err(hdev, "BCM: failed to write clock (%d)",
+				   err);
+			return err;
+		}
+
+		kfree_skb(skb);
+	}
+
+	bt_dev_dbg(hdev, "Set Controller UART speed to %d bit/s", speed);
+
+	param.zero = cpu_to_le16(0);
+	param.baud_rate = cpu_to_le32(speed);
+
+	/* This Broadcom specific command changes the UART's controller baud
+	 * rate.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc18, sizeof(param), &param,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		bt_dev_err(hdev, "BCM: failed to write update baudrate (%d)",
+			   err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
+/* bcm_device_exists should be protected by bcm_device_lock */
+static bool bcm_device_exists(struct bcm_device *device)
+{
+	struct list_head *p;
+
+#ifdef CONFIG_PM
+	/* Devices using serdev always exist */
+	if (device && device->hu && device->hu->serdev)
+		return true;
+#endif
+
+	list_for_each(p, &bcm_device_list) {
+		struct bcm_device *dev = list_entry(p, struct bcm_device, list);
+
+		if (device == dev)
+			return true;
+	}
+
+	return false;
+}
+
+static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
+{
+	int err;
+
+	if (powered && !dev->res_enabled) {
+		/* Intel Macs use bcm_apple_get_resources() and don't
+		 * have regulator supplies configured.
+		 */
+		if (dev->supplies[0].supply) {
+			err = regulator_bulk_enable(BCM_NUM_SUPPLIES,
+						    dev->supplies);
+			if (err)
+				return err;
+		}
+
+		/* LPO clock needs to be 32.768 kHz */
+		err = clk_set_rate(dev->lpo_clk, 32768);
+		if (err) {
+			dev_err(dev->dev, "Could not set LPO clock rate\n");
+			goto err_regulator_disable;
+		}
+
+		err = clk_prepare_enable(dev->lpo_clk);
+		if (err)
+			goto err_regulator_disable;
+
+		err = clk_prepare_enable(dev->txco_clk);
+		if (err)
+			goto err_lpo_clk_disable;
+	}
+
+	err = dev->set_shutdown(dev, powered);
+	if (err)
+		goto err_txco_clk_disable;
+
+	err = dev->set_device_wakeup(dev, powered);
+	if (err)
+		goto err_revert_shutdown;
+
+	if (!powered && dev->res_enabled) {
+		clk_disable_unprepare(dev->txco_clk);
+		clk_disable_unprepare(dev->lpo_clk);
+
+		/* Intel Macs use bcm_apple_get_resources() and don't
+		 * have regulator supplies configured.
+		 */
+		if (dev->supplies[0].supply)
+			regulator_bulk_disable(BCM_NUM_SUPPLIES,
+					       dev->supplies);
+	}
+
+	/* wait for device to power on and come out of reset */
+	usleep_range(100000, 120000);
+
+	dev->res_enabled = powered;
+
+	return 0;
+
+err_revert_shutdown:
+	dev->set_shutdown(dev, !powered);
+err_txco_clk_disable:
+	if (powered && !dev->res_enabled)
+		clk_disable_unprepare(dev->txco_clk);
+err_lpo_clk_disable:
+	if (powered && !dev->res_enabled)
+		clk_disable_unprepare(dev->lpo_clk);
+err_regulator_disable:
+	if (powered && !dev->res_enabled)
+		regulator_bulk_disable(BCM_NUM_SUPPLIES, dev->supplies);
+	return err;
+}
+
+#ifdef CONFIG_PM
+static irqreturn_t bcm_host_wake(int irq, void *data)
+{
+	struct bcm_device *bdev = data;
+
+	bt_dev_dbg(bdev, "Host wake IRQ");
+
+	pm_runtime_get(bdev->dev);
+	pm_runtime_mark_last_busy(bdev->dev);
+	pm_runtime_put_autosuspend(bdev->dev);
+
+	return IRQ_HANDLED;
+}
+
+static int bcm_request_irq(struct bcm_data *bcm)
+{
+	struct bcm_device *bdev = bcm->dev;
+	int err;
+
+	mutex_lock(&bcm_device_lock);
+	if (!bcm_device_exists(bdev)) {
+		err = -ENODEV;
+		goto unlock;
+	}
+
+	if (bdev->irq <= 0) {
+		err = -EOPNOTSUPP;
+		goto unlock;
+	}
+
+	err = devm_request_irq(bdev->dev, bdev->irq, bcm_host_wake,
+			       bdev->irq_active_low ? IRQF_TRIGGER_FALLING :
+						      IRQF_TRIGGER_RISING,
+			       "host_wake", bdev);
+	if (err) {
+		bdev->irq = err;
+		goto unlock;
+	}
+
+	bdev->irq_acquired = true;
+
+	device_init_wakeup(bdev->dev, true);
+
+	pm_runtime_set_autosuspend_delay(bdev->dev,
+					 BCM_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(bdev->dev);
+	pm_runtime_set_active(bdev->dev);
+	pm_runtime_enable(bdev->dev);
+
+unlock:
+	mutex_unlock(&bcm_device_lock);
+
+	return err;
+}
+
+static const struct bcm_set_sleep_mode default_sleep_params = {
+	.sleep_mode = 1,	/* 0=Disabled, 1=UART, 2=Reserved, 3=USB */
+	.idle_host = 2,		/* idle threshold HOST, in 300ms */
+	.idle_dev = 2,		/* idle threshold device, in 300ms */
+	.bt_wake_active = 1,	/* BT_WAKE active mode: 1 = high, 0 = low */
+	.host_wake_active = 0,	/* HOST_WAKE active mode: 1 = high, 0 = low */
+	.allow_host_sleep = 1,	/* Allow host sleep in SCO flag */
+	.combine_modes = 1,	/* Combine sleep and LPM flag */
+	.tristate_control = 0,	/* Allow tri-state control of UART tx flag */
+	/* Irrelevant USB flags */
+	.usb_auto_sleep = 0,
+	.usb_resume_timeout = 0,
+	.break_to_host = 0,
+	.pulsed_host_wake = 1,
+};
+
+static int bcm_setup_sleep(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+	struct sk_buff *skb;
+	struct bcm_set_sleep_mode sleep_params = default_sleep_params;
+
+	sleep_params.host_wake_active = !bcm->dev->irq_active_low;
+
+	skb = __hci_cmd_sync(hu->hdev, 0xfc27, sizeof(sleep_params),
+			     &sleep_params, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		bt_dev_err(hu->hdev, "Sleep VSC failed (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	bt_dev_dbg(hu->hdev, "Set Sleep Parameters VSC succeeded");
+
+	return 0;
+}
+#else
+static inline int bcm_request_irq(struct bcm_data *bcm) { return 0; }
+static inline int bcm_setup_sleep(struct hci_uart *hu) { return 0; }
+#endif
+
+static int bcm_set_diag(struct hci_dev *hdev, bool enable)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct bcm_data *bcm = hu->priv;
+	struct sk_buff *skb;
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return -ENETDOWN;
+
+	skb = bt_skb_alloc(3, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_u8(skb, BCM_LM_DIAG_PKT);
+	skb_put_u8(skb, 0xf0);
+	skb_put_u8(skb, enable);
+
+	skb_queue_tail(&bcm->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	return 0;
+}
+
+static int bcm_open(struct hci_uart *hu)
+{
+	struct bcm_data *bcm;
+	struct list_head *p;
+	int err;
+
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
+
+	if (!hci_uart_has_flow_control(hu))
+		return -EOPNOTSUPP;
+
+	bcm = kzalloc(sizeof(*bcm), GFP_KERNEL);
+	if (!bcm)
+		return -ENOMEM;
+
+	skb_queue_head_init(&bcm->txq);
+
+	hu->priv = bcm;
+
+	mutex_lock(&bcm_device_lock);
+
+	if (hu->serdev) {
+		bcm->dev = serdev_device_get_drvdata(hu->serdev);
+		goto out;
+	}
+
+	if (!hu->tty->dev)
+		goto out;
+
+	list_for_each(p, &bcm_device_list) {
+		struct bcm_device *dev = list_entry(p, struct bcm_device, list);
+
+		/* Retrieve saved bcm_device based on parent of the
+		 * platform device (saved during device probe) and
+		 * parent of tty device used by hci_uart
+		 */
+		if (hu->tty->dev->parent == dev->dev->parent) {
+			bcm->dev = dev;
+#ifdef CONFIG_PM
+			dev->hu = hu;
+#endif
+			break;
+		}
+	}
+
+out:
+	if (bcm->dev) {
+		if (bcm->dev->use_autobaud_mode)
+			hci_uart_set_flow_control(hu, false);	/* Assert BT_UART_CTS_N */
+		else if (bcm->dev->drive_rts_on_open)
+			hci_uart_set_flow_control(hu, true);
+
+		if (bcm->dev->use_autobaud_mode && bcm->dev->max_autobaud_speed)
+			hu->init_speed = min(bcm->dev->oper_speed, bcm->dev->max_autobaud_speed);
+		else
+			hu->init_speed = bcm->dev->init_speed;
+
+		/* If oper_speed is set, ldisc/serdev will set the baudrate
+		 * before calling setup()
+		 */
+		if (!bcm->dev->no_early_set_baudrate && !bcm->dev->use_autobaud_mode)
+			hu->oper_speed = bcm->dev->oper_speed;
+
+		err = bcm_gpio_set_power(bcm->dev, true);
+
+		if (bcm->dev->drive_rts_on_open)
+			hci_uart_set_flow_control(hu, false);
+
+		if (err)
+			goto err_unset_hu;
+	}
+
+	mutex_unlock(&bcm_device_lock);
+	return 0;
+
+err_unset_hu:
+#ifdef CONFIG_PM
+	if (!hu->serdev)
+		bcm->dev->hu = NULL;
+#endif
+	mutex_unlock(&bcm_device_lock);
+	hu->priv = NULL;
+	kfree(bcm);
+	return err;
+}
+
+static int bcm_close(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+	struct bcm_device *bdev = NULL;
+	int err;
+
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
+
+	/* Protect bcm->dev against removal of the device or driver */
+	mutex_lock(&bcm_device_lock);
+
+	if (hu->serdev) {
+		bdev = serdev_device_get_drvdata(hu->serdev);
+	} else if (bcm_device_exists(bcm->dev)) {
+		bdev = bcm->dev;
+#ifdef CONFIG_PM
+		bdev->hu = NULL;
+#endif
+	}
+
+	if (bdev) {
+		if (IS_ENABLED(CONFIG_PM) && bdev->irq_acquired) {
+			devm_free_irq(bdev->dev, bdev->irq, bdev);
+			device_init_wakeup(bdev->dev, false);
+			pm_runtime_disable(bdev->dev);
+		}
+
+		err = bcm_gpio_set_power(bdev, false);
+		if (err)
+			bt_dev_err(hu->hdev, "Failed to power down");
+		else
+			pm_runtime_set_suspended(bdev->dev);
+	}
+	mutex_unlock(&bcm_device_lock);
+
+	skb_queue_purge(&bcm->txq);
+	kfree_skb(bcm->rx_skb);
+	kfree(bcm);
+
+	hu->priv = NULL;
+	return 0;
+}
+
+static int bcm_flush(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
+
+	skb_queue_purge(&bcm->txq);
+
+	return 0;
+}
+
+static int bcm_setup(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+	bool fw_load_done = false;
+	bool use_autobaud_mode = (bcm->dev ? bcm->dev->use_autobaud_mode : 0);
+	unsigned int speed;
+	int err;
+
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
+
+	hu->hdev->set_diag = bcm_set_diag;
+	hu->hdev->set_bdaddr = btbcm_set_bdaddr;
+
+	err = btbcm_initialize(hu->hdev, &fw_load_done, use_autobaud_mode);
+	if (err)
+		return err;
+
+	if (!fw_load_done)
+		return 0;
+
+	/* Init speed if any */
+	if (bcm->dev && bcm->dev->init_speed)
+		speed = bcm->dev->init_speed;
+	else if (hu->proto->init_speed)
+		speed = hu->proto->init_speed;
+	else
+		speed = 0;
+
+	if (speed)
+		host_set_baudrate(hu, speed);
+
+	/* Operational speed if any */
+	if (hu->oper_speed)
+		speed = hu->oper_speed;
+	else if (bcm->dev && bcm->dev->oper_speed)
+		speed = bcm->dev->oper_speed;
+	else if (hu->proto->oper_speed)
+		speed = hu->proto->oper_speed;
+	else
+		speed = 0;
+
+	if (speed) {
+		err = bcm_set_baudrate(hu, speed);
+		if (!err)
+			host_set_baudrate(hu, speed);
+	}
+
+	/* PCM parameters if provided */
+	if (bcm->dev && bcm->dev->pcm_int_params[0] != 0xff) {
+		struct bcm_set_pcm_int_params params;
+
+		btbcm_read_pcm_int_params(hu->hdev, &params);
+
+		memcpy(&params, bcm->dev->pcm_int_params, 5);
+		btbcm_write_pcm_int_params(hu->hdev, &params);
+	}
+
+	err = btbcm_finalize(hu->hdev, &fw_load_done, use_autobaud_mode);
+	if (err)
+		return err;
+
+	/* Some devices ship with the controller default address.
+	 * Allow the bootloader to set a valid address through the
+	 * device tree.
+	 */
+	set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hu->hdev->quirks);
+
+	if (!bcm_request_irq(bcm))
+		err = bcm_setup_sleep(hu);
+
+	return err;
+}
+
+#define BCM_RECV_LM_DIAG \
+	.type = BCM_LM_DIAG_PKT, \
+	.hlen = BCM_LM_DIAG_SIZE, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = BCM_LM_DIAG_SIZE
+
+#define BCM_RECV_NULL \
+	.type = BCM_NULL_PKT, \
+	.hlen = BCM_NULL_SIZE, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = BCM_NULL_SIZE
+
+#define BCM_RECV_TYPE49 \
+	.type = BCM_TYPE49_PKT, \
+	.hlen = BCM_TYPE49_SIZE, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = BCM_TYPE49_SIZE
+
+#define BCM_RECV_TYPE52 \
+	.type = BCM_TYPE52_PKT, \
+	.hlen = BCM_TYPE52_SIZE, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = BCM_TYPE52_SIZE
+
+static const struct h4_recv_pkt bcm_recv_pkts[] = {
+	{ H4_RECV_ACL,      .recv = hci_recv_frame },
+	{ H4_RECV_SCO,      .recv = hci_recv_frame },
+	{ H4_RECV_EVENT,    .recv = hci_recv_frame },
+	{ H4_RECV_ISO,      .recv = hci_recv_frame },
+	{ BCM_RECV_LM_DIAG, .recv = hci_recv_diag  },
+	{ BCM_RECV_NULL,    .recv = hci_recv_diag  },
+	{ BCM_RECV_TYPE49,  .recv = hci_recv_diag  },
+	{ BCM_RECV_TYPE52,  .recv = hci_recv_diag  },
+};
+
+static int bcm_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	bcm->rx_skb = h4_recv_buf(hu->hdev, bcm->rx_skb, data, count,
+				  bcm_recv_pkts, ARRAY_SIZE(bcm_recv_pkts));
+	if (IS_ERR(bcm->rx_skb)) {
+		int err = PTR_ERR(bcm->rx_skb);
+		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+		bcm->rx_skb = NULL;
+		return err;
+	} else if (!bcm->rx_skb) {
+		/* Delay auto-suspend when receiving completed packet */
+		mutex_lock(&bcm_device_lock);
+		if (bcm->dev && bcm_device_exists(bcm->dev)) {
+			pm_runtime_get(bcm->dev->dev);
+			pm_runtime_mark_last_busy(bcm->dev->dev);
+			pm_runtime_put_autosuspend(bcm->dev->dev);
+		}
+		mutex_unlock(&bcm_device_lock);
+	}
+
+	return count;
+}
+
+static int bcm_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb);
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+	skb_queue_tail(&bcm->txq, skb);
+
+	return 0;
+}
+
+static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+	struct sk_buff *skb = NULL;
+	struct bcm_device *bdev = NULL;
+
+	mutex_lock(&bcm_device_lock);
+
+	if (bcm_device_exists(bcm->dev)) {
+		bdev = bcm->dev;
+		pm_runtime_get_sync(bdev->dev);
+		/* Shall be resumed here */
+	}
+
+	skb = skb_dequeue(&bcm->txq);
+
+	if (bdev) {
+		pm_runtime_mark_last_busy(bdev->dev);
+		pm_runtime_put_autosuspend(bdev->dev);
+	}
+
+	mutex_unlock(&bcm_device_lock);
+
+	return skb;
+}
+
+#ifdef CONFIG_PM
+static int bcm_suspend_device(struct device *dev)
+{
+	struct bcm_device *bdev = dev_get_drvdata(dev);
+	int err;
+
+	bt_dev_dbg(bdev, "");
+
+	if (!bdev->is_suspended && bdev->hu) {
+		hci_uart_set_flow_control(bdev->hu, true);
+
+		/* Once this returns, driver suspends BT via GPIO */
+		bdev->is_suspended = true;
+	}
+
+	/* Suspend the device */
+	err = bdev->set_device_wakeup(bdev, false);
+	if (err) {
+		if (bdev->is_suspended && bdev->hu) {
+			bdev->is_suspended = false;
+			hci_uart_set_flow_control(bdev->hu, false);
+		}
+		return -EBUSY;
+	}
+
+	bt_dev_dbg(bdev, "suspend, delaying 15 ms");
+	msleep(15);
+
+	return 0;
+}
+
+static int bcm_resume_device(struct device *dev)
+{
+	struct bcm_device *bdev = dev_get_drvdata(dev);
+	int err;
+
+	bt_dev_dbg(bdev, "");
+
+	err = bdev->set_device_wakeup(bdev, true);
+	if (err) {
+		dev_err(dev, "Failed to power up\n");
+		return err;
+	}
+
+	bt_dev_dbg(bdev, "resume, delaying 15 ms");
+	msleep(15);
+
+	/* When this executes, the device has woken up already */
+	if (bdev->is_suspended && bdev->hu) {
+		bdev->is_suspended = false;
+
+		hci_uart_set_flow_control(bdev->hu, false);
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+/* suspend callback */
+static int bcm_suspend(struct device *dev)
+{
+	struct bcm_device *bdev = dev_get_drvdata(dev);
+	int error;
+
+	bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended);
+
+	/*
+	 * When used with a device instantiated as platform_device, bcm_suspend
+	 * can be called at any time as long as the platform device is bound,
+	 * so it should use bcm_device_lock to protect access to hci_uart
+	 * and device_wake-up GPIO.
+	 */
+	mutex_lock(&bcm_device_lock);
+
+	if (!bdev->hu)
+		goto unlock;
+
+	if (pm_runtime_active(dev))
+		bcm_suspend_device(dev);
+
+	if (device_may_wakeup(dev) && bdev->irq > 0) {
+		error = enable_irq_wake(bdev->irq);
+		if (!error)
+			bt_dev_dbg(bdev, "BCM irq: enabled");
+	}
+
+unlock:
+	mutex_unlock(&bcm_device_lock);
+
+	return 0;
+}
+
+/* resume callback */
+static int bcm_resume(struct device *dev)
+{
+	struct bcm_device *bdev = dev_get_drvdata(dev);
+	int err = 0;
+
+	bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended);
+
+	/*
+	 * When used with a device instantiated as platform_device, bcm_resume
+	 * can be called at any time as long as platform device is bound,
+	 * so it should use bcm_device_lock to protect access to hci_uart
+	 * and device_wake-up GPIO.
+	 */
+	mutex_lock(&bcm_device_lock);
+
+	if (!bdev->hu)
+		goto unlock;
+
+	if (device_may_wakeup(dev) && bdev->irq > 0) {
+		disable_irq_wake(bdev->irq);
+		bt_dev_dbg(bdev, "BCM irq: disabled");
+	}
+
+	err = bcm_resume_device(dev);
+
+unlock:
+	mutex_unlock(&bcm_device_lock);
+
+	if (!err) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return 0;
+}
+#endif
+
+/* Some firmware reports an IRQ which does not work (wrong pin in fw table?) */
+static struct gpiod_lookup_table asus_tf103c_irq_gpios = {
+	.dev_id = "serial0-0",
+	.table = {
+		GPIO_LOOKUP("INT33FC:02", 17, "host-wakeup-alt", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
+static const struct dmi_system_id bcm_broken_irq_dmi_table[] = {
+	{
+		.ident = "Asus TF103C",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TF103C"),
+		},
+		.driver_data = &asus_tf103c_irq_gpios,
+	},
+	{
+		.ident = "Meegopad T08",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR,
+					"To be filled by OEM."),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "T3 MRD"),
+			DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V1.1"),
+		},
+	},
+	{ }
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_gpio_params first_gpio = { 0, 0, false };
+static const struct acpi_gpio_params second_gpio = { 1, 0, false };
+static const struct acpi_gpio_params third_gpio = { 2, 0, false };
+
+static const struct acpi_gpio_mapping acpi_bcm_int_last_gpios[] = {
+	{ "device-wakeup-gpios", &first_gpio, 1 },
+	{ "shutdown-gpios", &second_gpio, 1 },
+	{ "host-wakeup-gpios", &third_gpio, 1 },
+	{ },
+};
+
+static const struct acpi_gpio_mapping acpi_bcm_int_first_gpios[] = {
+	{ "host-wakeup-gpios", &first_gpio, 1 },
+	{ "device-wakeup-gpios", &second_gpio, 1 },
+	{ "shutdown-gpios", &third_gpio, 1 },
+	{ },
+};
+
+static int bcm_resource(struct acpi_resource *ares, void *data)
+{
+	struct bcm_device *dev = data;
+	struct acpi_resource_extended_irq *irq;
+	struct acpi_resource_gpio *gpio;
+	struct acpi_resource_uart_serialbus *sb;
+
+	switch (ares->type) {
+	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+		irq = &ares->data.extended_irq;
+		if (irq->polarity != ACPI_ACTIVE_LOW)
+			dev_info(dev->dev, "ACPI Interrupt resource is active-high, this is usually wrong, treating the IRQ as active-low\n");
+		dev->irq_active_low = true;
+		break;
+
+	case ACPI_RESOURCE_TYPE_GPIO:
+		gpio = &ares->data.gpio;
+		if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT) {
+			dev->gpio_int_idx = dev->gpio_count;
+			dev->irq_active_low = gpio->polarity == ACPI_ACTIVE_LOW;
+		}
+		dev->gpio_count++;
+		break;
+
+	case ACPI_RESOURCE_TYPE_SERIAL_BUS:
+		sb = &ares->data.uart_serial_bus;
+		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART) {
+			dev->init_speed = sb->default_baud_rate;
+			dev->oper_speed = 4000000;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int bcm_apple_set_device_wakeup(struct bcm_device *dev, bool awake)
+{
+	if (ACPI_FAILURE(acpi_execute_simple_method(dev->btlp, NULL, !awake)))
+		return -EIO;
+
+	return 0;
+}
+
+static int bcm_apple_set_shutdown(struct bcm_device *dev, bool powered)
+{
+	if (ACPI_FAILURE(acpi_evaluate_object(powered ? dev->btpu : dev->btpd,
+					      NULL, NULL, NULL)))
+		return -EIO;
+
+	return 0;
+}
+
+static int bcm_apple_get_resources(struct bcm_device *dev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(dev->dev);
+	const union acpi_object *obj;
+
+	if (!adev ||
+	    ACPI_FAILURE(acpi_get_handle(adev->handle, "BTLP", &dev->btlp)) ||
+	    ACPI_FAILURE(acpi_get_handle(adev->handle, "BTPU", &dev->btpu)) ||
+	    ACPI_FAILURE(acpi_get_handle(adev->handle, "BTPD", &dev->btpd)))
+		return -ENODEV;
+
+	if (!acpi_dev_get_property(adev, "baud", ACPI_TYPE_BUFFER, &obj) &&
+	    obj->buffer.length == 8)
+		dev->init_speed = *(u64 *)obj->buffer.pointer;
+
+	dev->set_device_wakeup = bcm_apple_set_device_wakeup;
+	dev->set_shutdown = bcm_apple_set_shutdown;
+
+	return 0;
+}
+#else
+static inline int bcm_apple_get_resources(struct bcm_device *dev)
+{
+	return -EOPNOTSUPP;
+}
+#endif /* CONFIG_ACPI */
+
+static int bcm_gpio_set_device_wakeup(struct bcm_device *dev, bool awake)
+{
+	gpiod_set_value_cansleep(dev->device_wakeup, awake);
+	return 0;
+}
+
+static int bcm_gpio_set_shutdown(struct bcm_device *dev, bool powered)
+{
+	gpiod_set_value_cansleep(dev->shutdown, powered);
+	if (dev->reset)
+		/*
+		 * The reset line is asserted on powerdown and deasserted
+		 * on poweron so the inverse of powered is used. Notice
+		 * that the GPIO line BT_RST_N needs to be specified as
+		 * active low in the device tree or similar system
+		 * description.
+		 */
+		gpiod_set_value_cansleep(dev->reset, !powered);
+	return 0;
+}
+
+/* Try a bunch of names for TXCO */
+static struct clk *bcm_get_txco(struct device *dev)
+{
+	struct clk *clk;
+
+	/* New explicit name */
+	clk = devm_clk_get(dev, "txco");
+	if (!IS_ERR(clk) || PTR_ERR(clk) == -EPROBE_DEFER)
+		return clk;
+
+	/* Deprecated name */
+	clk = devm_clk_get(dev, "extclk");
+	if (!IS_ERR(clk) || PTR_ERR(clk) == -EPROBE_DEFER)
+		return clk;
+
+	/* Original code used no name at all */
+	return devm_clk_get(dev, NULL);
+}
+
+static int bcm_get_resources(struct bcm_device *dev)
+{
+	const struct dmi_system_id *broken_irq_dmi_id;
+	const char *irq_con_id = "host-wakeup";
+	int err;
+
+	dev->name = dev_name(dev->dev);
+
+	if (x86_apple_machine && !bcm_apple_get_resources(dev))
+		return 0;
+
+	dev->txco_clk = bcm_get_txco(dev->dev);
+
+	/* Handle deferred probing */
+	if (dev->txco_clk == ERR_PTR(-EPROBE_DEFER))
+		return PTR_ERR(dev->txco_clk);
+
+	/* Ignore all other errors as before */
+	if (IS_ERR(dev->txco_clk))
+		dev->txco_clk = NULL;
+
+	dev->lpo_clk = devm_clk_get(dev->dev, "lpo");
+	if (dev->lpo_clk == ERR_PTR(-EPROBE_DEFER))
+		return PTR_ERR(dev->lpo_clk);
+
+	if (IS_ERR(dev->lpo_clk))
+		dev->lpo_clk = NULL;
+
+	/* Check if we accidentally fetched the lpo clock twice */
+	if (dev->lpo_clk && clk_is_match(dev->lpo_clk, dev->txco_clk)) {
+		devm_clk_put(dev->dev, dev->txco_clk);
+		dev->txco_clk = NULL;
+	}
+
+	dev->device_wakeup = devm_gpiod_get_optional(dev->dev, "device-wakeup",
+						     GPIOD_OUT_LOW);
+	if (IS_ERR(dev->device_wakeup))
+		return PTR_ERR(dev->device_wakeup);
+
+	dev->shutdown = devm_gpiod_get_optional(dev->dev, "shutdown",
+						GPIOD_OUT_LOW);
+	if (IS_ERR(dev->shutdown))
+		return PTR_ERR(dev->shutdown);
+
+	dev->reset = devm_gpiod_get_optional(dev->dev, "reset",
+					     GPIOD_OUT_LOW);
+	if (IS_ERR(dev->reset))
+		return PTR_ERR(dev->reset);
+
+	dev->set_device_wakeup = bcm_gpio_set_device_wakeup;
+	dev->set_shutdown = bcm_gpio_set_shutdown;
+
+	dev->supplies[0].supply = "vbat";
+	dev->supplies[1].supply = "vddio";
+	err = devm_regulator_bulk_get(dev->dev, BCM_NUM_SUPPLIES,
+				      dev->supplies);
+	if (err)
+		return err;
+
+	broken_irq_dmi_id = dmi_first_match(bcm_broken_irq_dmi_table);
+	if (broken_irq_dmi_id && broken_irq_dmi_id->driver_data) {
+		gpiod_add_lookup_table(broken_irq_dmi_id->driver_data);
+		irq_con_id = "host-wakeup-alt";
+		dev->irq_active_low = false;
+		dev->irq = 0;
+	}
+
+	/* IRQ can be declared in ACPI table as Interrupt or GpioInt */
+	if (dev->irq <= 0) {
+		struct gpio_desc *gpio;
+
+		gpio = devm_gpiod_get_optional(dev->dev, irq_con_id, GPIOD_IN);
+		if (IS_ERR(gpio))
+			return PTR_ERR(gpio);
+
+		dev->irq = gpiod_to_irq(gpio);
+	}
+
+	if (broken_irq_dmi_id) {
+		if (broken_irq_dmi_id->driver_data) {
+			gpiod_remove_lookup_table(broken_irq_dmi_id->driver_data);
+		} else {
+			dev_info(dev->dev, "%s: Has a broken IRQ config, disabling IRQ support / runtime-pm\n",
+				 broken_irq_dmi_id->ident);
+			dev->irq = 0;
+		}
+	}
+
+	dev_dbg(dev->dev, "BCM irq: %d\n", dev->irq);
+	return 0;
+}
+
+#ifdef CONFIG_ACPI
+static int bcm_acpi_probe(struct bcm_device *dev)
+{
+	LIST_HEAD(resources);
+	const struct acpi_gpio_mapping *gpio_mapping = acpi_bcm_int_last_gpios;
+	struct resource_entry *entry;
+	int ret;
+
+	/* Retrieve UART ACPI info */
+	dev->gpio_int_idx = -1;
+	ret = acpi_dev_get_resources(ACPI_COMPANION(dev->dev),
+				     &resources, bcm_resource, dev);
+	if (ret < 0)
+		return ret;
+
+	resource_list_for_each_entry(entry, &resources) {
+		if (resource_type(entry->res) == IORESOURCE_IRQ) {
+			dev->irq = entry->res->start;
+			break;
+		}
+	}
+	acpi_dev_free_resource_list(&resources);
+
+	/* If the DSDT uses an Interrupt resource for the IRQ, then there are
+	 * only 2 GPIO resources, we use the irq-last mapping for this, since
+	 * we already have an irq the 3th / last mapping will not be used.
+	 */
+	if (dev->irq)
+		gpio_mapping = acpi_bcm_int_last_gpios;
+	else if (dev->gpio_int_idx == 0)
+		gpio_mapping = acpi_bcm_int_first_gpios;
+	else if (dev->gpio_int_idx == 2)
+		gpio_mapping = acpi_bcm_int_last_gpios;
+	else
+		dev_warn(dev->dev, "Unexpected ACPI gpio_int_idx: %d\n",
+			 dev->gpio_int_idx);
+
+	/* Warn if our expectations are not met. */
+	if (dev->gpio_count != (dev->irq ? 2 : 3))
+		dev_warn(dev->dev, "Unexpected number of ACPI GPIOs: %d\n",
+			 dev->gpio_count);
+
+	ret = devm_acpi_dev_add_driver_gpios(dev->dev, gpio_mapping);
+	if (ret)
+		return ret;
+
+	if (irq_polarity != -1) {
+		dev->irq_active_low = irq_polarity;
+		dev_warn(dev->dev, "Overwriting IRQ polarity to active %s by module-param\n",
+			 dev->irq_active_low ? "low" : "high");
+	}
+
+	return 0;
+}
+#else
+static int bcm_acpi_probe(struct bcm_device *dev)
+{
+	return -EINVAL;
+}
+#endif /* CONFIG_ACPI */
+
+static int bcm_of_probe(struct bcm_device *bdev)
+{
+	bdev->use_autobaud_mode = device_property_read_bool(bdev->dev,
+							    "brcm,requires-autobaud-mode");
+	device_property_read_u32(bdev->dev, "max-speed", &bdev->oper_speed);
+	device_property_read_u8_array(bdev->dev, "brcm,bt-pcm-int-params",
+				      bdev->pcm_int_params, 5);
+	bdev->irq = of_irq_get_byname(bdev->dev->of_node, "host-wakeup");
+	bdev->irq_active_low = irq_get_trigger_type(bdev->irq)
+			     & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW);
+	return 0;
+}
+
+static int bcm_probe(struct platform_device *pdev)
+{
+	struct bcm_device *dev;
+	int ret;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->dev = &pdev->dev;
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		return ret;
+
+	dev->irq = ret;
+
+	/* Initialize routing field to an unused value */
+	dev->pcm_int_params[0] = 0xff;
+
+	if (has_acpi_companion(&pdev->dev)) {
+		ret = bcm_acpi_probe(dev);
+		if (ret)
+			return ret;
+	}
+
+	ret = bcm_get_resources(dev);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, dev);
+
+	dev_info(&pdev->dev, "%s device registered.\n", dev->name);
+
+	/* Place this instance on the device list */
+	mutex_lock(&bcm_device_lock);
+	list_add_tail(&dev->list, &bcm_device_list);
+	mutex_unlock(&bcm_device_lock);
+
+	ret = bcm_gpio_set_power(dev, false);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to power down\n");
+
+	return 0;
+}
+
+static int bcm_remove(struct platform_device *pdev)
+{
+	struct bcm_device *dev = platform_get_drvdata(pdev);
+
+	mutex_lock(&bcm_device_lock);
+	list_del(&dev->list);
+	mutex_unlock(&bcm_device_lock);
+
+	dev_info(&pdev->dev, "%s device unregistered.\n", dev->name);
+
+	return 0;
+}
+
+static const struct hci_uart_proto bcm_proto = {
+	.id		= HCI_UART_BCM,
+	.name		= "Broadcom",
+	.manufacturer	= 15,
+	.init_speed	= 115200,
+	.open		= bcm_open,
+	.close		= bcm_close,
+	.flush		= bcm_flush,
+	.setup		= bcm_setup,
+	.set_baudrate	= bcm_set_baudrate,
+	.recv		= bcm_recv,
+	.enqueue	= bcm_enqueue,
+	.dequeue	= bcm_dequeue,
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id bcm_acpi_match[] = {
+	{ "BCM2E00" },
+	{ "BCM2E01" },
+	{ "BCM2E02" },
+	{ "BCM2E03" },
+	{ "BCM2E04" },
+	{ "BCM2E05" },
+	{ "BCM2E06" },
+	{ "BCM2E07" },
+	{ "BCM2E08" },
+	{ "BCM2E09" },
+	{ "BCM2E0A" },
+	{ "BCM2E0B" },
+	{ "BCM2E0C" },
+	{ "BCM2E0D" },
+	{ "BCM2E0E" },
+	{ "BCM2E0F" },
+	{ "BCM2E10" },
+	{ "BCM2E11" },
+	{ "BCM2E12" },
+	{ "BCM2E13" },
+	{ "BCM2E14" },
+	{ "BCM2E15" },
+	{ "BCM2E16" },
+	{ "BCM2E17" },
+	{ "BCM2E18" },
+	{ "BCM2E19" },
+	{ "BCM2E1A" },
+	{ "BCM2E1B" },
+	{ "BCM2E1C" },
+	{ "BCM2E1D" },
+	{ "BCM2E1F" },
+	{ "BCM2E20" },
+	{ "BCM2E21" },
+	{ "BCM2E22" },
+	{ "BCM2E23" },
+	{ "BCM2E24" },
+	{ "BCM2E25" },
+	{ "BCM2E26" },
+	{ "BCM2E27" },
+	{ "BCM2E28" },
+	{ "BCM2E29" },
+	{ "BCM2E2A" },
+	{ "BCM2E2B" },
+	{ "BCM2E2C" },
+	{ "BCM2E2D" },
+	{ "BCM2E2E" },
+	{ "BCM2E2F" },
+	{ "BCM2E30" },
+	{ "BCM2E31" },
+	{ "BCM2E32" },
+	{ "BCM2E33" },
+	{ "BCM2E34" },
+	{ "BCM2E35" },
+	{ "BCM2E36" },
+	{ "BCM2E37" },
+	{ "BCM2E38" },
+	{ "BCM2E39" },
+	{ "BCM2E3A" },
+	{ "BCM2E3B" },
+	{ "BCM2E3C" },
+	{ "BCM2E3D" },
+	{ "BCM2E3E" },
+	{ "BCM2E3F" },
+	{ "BCM2E40" },
+	{ "BCM2E41" },
+	{ "BCM2E42" },
+	{ "BCM2E43" },
+	{ "BCM2E44" },
+	{ "BCM2E45" },
+	{ "BCM2E46" },
+	{ "BCM2E47" },
+	{ "BCM2E48" },
+	{ "BCM2E49" },
+	{ "BCM2E4A" },
+	{ "BCM2E4B" },
+	{ "BCM2E4C" },
+	{ "BCM2E4D" },
+	{ "BCM2E4E" },
+	{ "BCM2E4F" },
+	{ "BCM2E50" },
+	{ "BCM2E51" },
+	{ "BCM2E52" },
+	{ "BCM2E53" },
+	{ "BCM2E54" },
+	{ "BCM2E55" },
+	{ "BCM2E56" },
+	{ "BCM2E57" },
+	{ "BCM2E58" },
+	{ "BCM2E59" },
+	{ "BCM2E5A" },
+	{ "BCM2E5B" },
+	{ "BCM2E5C" },
+	{ "BCM2E5D" },
+	{ "BCM2E5E" },
+	{ "BCM2E5F" },
+	{ "BCM2E60" },
+	{ "BCM2E61" },
+	{ "BCM2E62" },
+	{ "BCM2E63" },
+	{ "BCM2E64" },
+	{ "BCM2E65" },
+	{ "BCM2E66" },
+	{ "BCM2E67" },
+	{ "BCM2E68" },
+	{ "BCM2E69" },
+	{ "BCM2E6B" },
+	{ "BCM2E6D" },
+	{ "BCM2E6E" },
+	{ "BCM2E6F" },
+	{ "BCM2E70" },
+	{ "BCM2E71" },
+	{ "BCM2E72" },
+	{ "BCM2E73" },
+	{ "BCM2E74" },
+	{ "BCM2E75" },
+	{ "BCM2E76" },
+	{ "BCM2E77" },
+	{ "BCM2E78" },
+	{ "BCM2E79" },
+	{ "BCM2E7A" },
+	{ "BCM2E7B" },
+	{ "BCM2E7C" },
+	{ "BCM2E7D" },
+	{ "BCM2E7E" },
+	{ "BCM2E7F" },
+	{ "BCM2E80" },
+	{ "BCM2E81" },
+	{ "BCM2E82" },
+	{ "BCM2E83" },
+	{ "BCM2E84" },
+	{ "BCM2E85" },
+	{ "BCM2E86" },
+	{ "BCM2E87" },
+	{ "BCM2E88" },
+	{ "BCM2E89" },
+	{ "BCM2E8A" },
+	{ "BCM2E8B" },
+	{ "BCM2E8C" },
+	{ "BCM2E8D" },
+	{ "BCM2E8E" },
+	{ "BCM2E90" },
+	{ "BCM2E92" },
+	{ "BCM2E93" },
+	{ "BCM2E94" },
+	{ "BCM2E95" },
+	{ "BCM2E96" },
+	{ "BCM2E97" },
+	{ "BCM2E98" },
+	{ "BCM2E99" },
+	{ "BCM2E9A" },
+	{ "BCM2E9B" },
+	{ "BCM2E9C" },
+	{ "BCM2E9D" },
+	{ "BCM2EA0" },
+	{ "BCM2EA1" },
+	{ "BCM2EA2" },
+	{ "BCM2EA3" },
+	{ "BCM2EA4" },
+	{ "BCM2EA5" },
+	{ "BCM2EA6" },
+	{ "BCM2EA7" },
+	{ "BCM2EA8" },
+	{ "BCM2EA9" },
+	{ "BCM2EAA" },
+	{ "BCM2EAB" },
+	{ "BCM2EAC" },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, bcm_acpi_match);
+#endif
+
+/* suspend and resume callbacks */
+static const struct dev_pm_ops bcm_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(bcm_suspend, bcm_resume)
+	SET_RUNTIME_PM_OPS(bcm_suspend_device, bcm_resume_device, NULL)
+};
+
+static struct platform_driver bcm_driver = {
+	.probe = bcm_probe,
+	.remove = bcm_remove,
+	.driver = {
+		.name = "hci_bcm",
+		.acpi_match_table = ACPI_PTR(bcm_acpi_match),
+		.pm = &bcm_pm_ops,
+	},
+};
+
+static int bcm_serdev_probe(struct serdev_device *serdev)
+{
+	struct bcm_device *bcmdev;
+	const struct bcm_device_data *data;
+	int err;
+
+	bcmdev = devm_kzalloc(&serdev->dev, sizeof(*bcmdev), GFP_KERNEL);
+	if (!bcmdev)
+		return -ENOMEM;
+
+	bcmdev->dev = &serdev->dev;
+#ifdef CONFIG_PM
+	bcmdev->hu = &bcmdev->serdev_hu;
+#endif
+	bcmdev->serdev_hu.serdev = serdev;
+	serdev_device_set_drvdata(serdev, bcmdev);
+
+	/* Initialize routing field to an unused value */
+	bcmdev->pcm_int_params[0] = 0xff;
+
+	if (has_acpi_companion(&serdev->dev))
+		err = bcm_acpi_probe(bcmdev);
+	else
+		err = bcm_of_probe(bcmdev);
+	if (err)
+		return err;
+
+	err = bcm_get_resources(bcmdev);
+	if (err)
+		return err;
+
+	if (!bcmdev->shutdown) {
+		dev_warn(&serdev->dev,
+			 "No reset resource, using default baud rate\n");
+		bcmdev->oper_speed = bcmdev->init_speed;
+	}
+
+	err = bcm_gpio_set_power(bcmdev, false);
+	if (err)
+		dev_err(&serdev->dev, "Failed to power down\n");
+
+	data = device_get_match_data(bcmdev->dev);
+	if (data) {
+		bcmdev->max_autobaud_speed = data->max_autobaud_speed;
+		bcmdev->no_early_set_baudrate = data->no_early_set_baudrate;
+		bcmdev->drive_rts_on_open = data->drive_rts_on_open;
+		bcmdev->no_uart_clock_set = data->no_uart_clock_set;
+	}
+
+	return hci_uart_register_device(&bcmdev->serdev_hu, &bcm_proto);
+}
+
+static void bcm_serdev_remove(struct serdev_device *serdev)
+{
+	struct bcm_device *bcmdev = serdev_device_get_drvdata(serdev);
+
+	hci_uart_unregister_device(&bcmdev->serdev_hu);
+}
+
+#ifdef CONFIG_OF
+static struct bcm_device_data bcm4354_device_data = {
+	.no_early_set_baudrate = true,
+};
+
+static struct bcm_device_data bcm43438_device_data = {
+	.drive_rts_on_open = true,
+};
+
+static struct bcm_device_data cyw4373a0_device_data = {
+	.no_uart_clock_set = true,
+};
+
+static struct bcm_device_data cyw55572_device_data = {
+	.max_autobaud_speed = 921600,
+};
+
+static const struct of_device_id bcm_bluetooth_of_match[] = {
+	{ .compatible = "brcm,bcm20702a1" },
+	{ .compatible = "brcm,bcm4329-bt" },
+	{ .compatible = "brcm,bcm4330-bt" },
+	{ .compatible = "brcm,bcm4334-bt" },
+	{ .compatible = "brcm,bcm4345c5" },
+	{ .compatible = "brcm,bcm43430a0-bt" },
+	{ .compatible = "brcm,bcm43430a1-bt" },
+	{ .compatible = "brcm,bcm43438-bt", .data = &bcm43438_device_data },
+	{ .compatible = "brcm,bcm4349-bt", .data = &bcm43438_device_data },
+	{ .compatible = "brcm,bcm43540-bt", .data = &bcm4354_device_data },
+	{ .compatible = "brcm,bcm4335a0" },
+	{ .compatible = "cypress,cyw4373a0-bt", .data = &cyw4373a0_device_data },
+	{ .compatible = "infineon,cyw55572-bt", .data = &cyw55572_device_data },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match);
+#endif
+
+static struct serdev_device_driver bcm_serdev_driver = {
+	.probe = bcm_serdev_probe,
+	.remove = bcm_serdev_remove,
+	.driver = {
+		.name = "hci_uart_bcm",
+		.of_match_table = of_match_ptr(bcm_bluetooth_of_match),
+		.acpi_match_table = ACPI_PTR(bcm_acpi_match),
+		.pm = &bcm_pm_ops,
+	},
+};
+
+int __init bcm_init(void)
+{
+	/* For now, we need to keep both platform device
+	 * driver (ACPI generated) and serdev driver (DT).
+	 */
+	platform_driver_register(&bcm_driver);
+	serdev_device_driver_register(&bcm_serdev_driver);
+
+	return hci_uart_register_proto(&bcm_proto);
+}
+
+int __exit bcm_deinit(void)
+{
+	platform_driver_unregister(&bcm_driver);
+	serdev_device_driver_unregister(&bcm_serdev_driver);
+
+	return hci_uart_unregister_proto(&bcm_proto);
+}
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
new file mode 100644
index 000000000..8055f6360
--- /dev/null
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -0,0 +1,784 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Bluetooth HCI UART driver
+ *
+ *  Copyright (C) 2002-2003  Fabrizio Gennari <fabrizio.gennari@philips.com>
+ *  Copyright (C) 2004-2005  Marcel Holtmann <marcel@holtmann.org>
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/poll.h>
+
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/ioctl.h>
+#include <linux/skbuff.h>
+#include <linux/bitrev.h>
+#include <asm/unaligned.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+
+static bool txcrc = true;
+static bool hciextn = true;
+
+#define BCSP_TXWINSIZE	4
+
+#define BCSP_ACK_PKT	0x05
+#define BCSP_LE_PKT	0x06
+
+struct bcsp_struct {
+	struct sk_buff_head unack;	/* Unack'ed packets queue */
+	struct sk_buff_head rel;	/* Reliable packets queue */
+	struct sk_buff_head unrel;	/* Unreliable packets queue */
+
+	unsigned long rx_count;
+	struct	sk_buff *rx_skb;
+	u8	rxseq_txack;		/* rxseq == txack. */
+	u8	rxack;			/* Last packet sent by us that the peer ack'ed */
+	struct	timer_list tbcsp;
+	struct	hci_uart *hu;
+
+	enum {
+		BCSP_W4_PKT_DELIMITER,
+		BCSP_W4_PKT_START,
+		BCSP_W4_BCSP_HDR,
+		BCSP_W4_DATA,
+		BCSP_W4_CRC
+	} rx_state;
+
+	enum {
+		BCSP_ESCSTATE_NOESC,
+		BCSP_ESCSTATE_ESC
+	} rx_esc_state;
+
+	u8	use_crc;
+	u16	message_crc;
+	u8	txack_req;		/* Do we need to send ack's to the peer? */
+
+	/* Reliable packet sequence number - used to assign seq to each rel pkt. */
+	u8	msgq_txseq;
+};
+
+/* ---- BCSP CRC calculation ---- */
+
+/* Table for calculating CRC for polynomial 0x1021, LSB processed first,
+ * initial value 0xffff, bits shifted in reverse order.
+ */
+
+static const u16 crc_table[] = {
+	0x0000, 0x1081, 0x2102, 0x3183,
+	0x4204, 0x5285, 0x6306, 0x7387,
+	0x8408, 0x9489, 0xa50a, 0xb58b,
+	0xc60c, 0xd68d, 0xe70e, 0xf78f
+};
+
+/* Initialise the crc calculator */
+#define BCSP_CRC_INIT(x) x = 0xffff
+
+/* Update crc with next data byte
+ *
+ * Implementation note
+ *     The data byte is treated as two nibbles.  The crc is generated
+ *     in reverse, i.e., bits are fed into the register from the top.
+ */
+static void bcsp_crc_update(u16 *crc, u8 d)
+{
+	u16 reg = *crc;
+
+	reg = (reg >> 4) ^ crc_table[(reg ^ d) & 0x000f];
+	reg = (reg >> 4) ^ crc_table[(reg ^ (d >> 4)) & 0x000f];
+
+	*crc = reg;
+}
+
+/* ---- BCSP core ---- */
+
+static void bcsp_slip_msgdelim(struct sk_buff *skb)
+{
+	const char pkt_delim = 0xc0;
+
+	skb_put_data(skb, &pkt_delim, 1);
+}
+
+static void bcsp_slip_one_byte(struct sk_buff *skb, u8 c)
+{
+	const char esc_c0[2] = { 0xdb, 0xdc };
+	const char esc_db[2] = { 0xdb, 0xdd };
+
+	switch (c) {
+	case 0xc0:
+		skb_put_data(skb, &esc_c0, 2);
+		break;
+	case 0xdb:
+		skb_put_data(skb, &esc_db, 2);
+		break;
+	default:
+		skb_put_data(skb, &c, 1);
+	}
+}
+
+static int bcsp_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct bcsp_struct *bcsp = hu->priv;
+
+	if (skb->len > 0xFFF) {
+		BT_ERR("Packet too long");
+		kfree_skb(skb);
+		return 0;
+	}
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_ACLDATA_PKT:
+	case HCI_COMMAND_PKT:
+		skb_queue_tail(&bcsp->rel, skb);
+		break;
+
+	case HCI_SCODATA_PKT:
+		skb_queue_tail(&bcsp->unrel, skb);
+		break;
+
+	default:
+		BT_ERR("Unknown packet type");
+		kfree_skb(skb);
+		break;
+	}
+
+	return 0;
+}
+
+static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data,
+					int len, int pkt_type)
+{
+	struct sk_buff *nskb;
+	u8 hdr[4], chan;
+	u16 BCSP_CRC_INIT(bcsp_txmsg_crc);
+	int rel, i;
+
+	switch (pkt_type) {
+	case HCI_ACLDATA_PKT:
+		chan = 6;	/* BCSP ACL channel */
+		rel = 1;	/* reliable channel */
+		break;
+	case HCI_COMMAND_PKT:
+		chan = 5;	/* BCSP cmd/evt channel */
+		rel = 1;	/* reliable channel */
+		break;
+	case HCI_SCODATA_PKT:
+		chan = 7;	/* BCSP SCO channel */
+		rel = 0;	/* unreliable channel */
+		break;
+	case BCSP_LE_PKT:
+		chan = 1;	/* BCSP LE channel */
+		rel = 0;	/* unreliable channel */
+		break;
+	case BCSP_ACK_PKT:
+		chan = 0;	/* BCSP internal channel */
+		rel = 0;	/* unreliable channel */
+		break;
+	default:
+		BT_ERR("Unknown packet type");
+		return NULL;
+	}
+
+	if (hciextn && chan == 5) {
+		__le16 opcode = ((struct hci_command_hdr *)data)->opcode;
+
+		/* Vendor specific commands */
+		if (hci_opcode_ogf(__le16_to_cpu(opcode)) == 0x3f) {
+			u8 desc = *(data + HCI_COMMAND_HDR_SIZE);
+
+			if ((desc & 0xf0) == 0xc0) {
+				data += HCI_COMMAND_HDR_SIZE + 1;
+				len  -= HCI_COMMAND_HDR_SIZE + 1;
+				chan = desc & 0x0f;
+			}
+		}
+	}
+
+	/* Max len of packet: (original len +4(bcsp hdr) +2(crc))*2
+	 * (because bytes 0xc0 and 0xdb are escaped, worst case is
+	 * when the packet is all made of 0xc0 and 0xdb :) )
+	 * + 2 (0xc0 delimiters at start and end).
+	 */
+
+	nskb = alloc_skb((len + 6) * 2 + 2, GFP_ATOMIC);
+	if (!nskb)
+		return NULL;
+
+	hci_skb_pkt_type(nskb) = pkt_type;
+
+	bcsp_slip_msgdelim(nskb);
+
+	hdr[0] = bcsp->rxseq_txack << 3;
+	bcsp->txack_req = 0;
+	BT_DBG("We request packet no %u to card", bcsp->rxseq_txack);
+
+	if (rel) {
+		hdr[0] |= 0x80 + bcsp->msgq_txseq;
+		BT_DBG("Sending packet with seqno %u", bcsp->msgq_txseq);
+		bcsp->msgq_txseq = (bcsp->msgq_txseq + 1) & 0x07;
+	}
+
+	if (bcsp->use_crc)
+		hdr[0] |= 0x40;
+
+	hdr[1] = ((len << 4) & 0xff) | chan;
+	hdr[2] = len >> 4;
+	hdr[3] = ~(hdr[0] + hdr[1] + hdr[2]);
+
+	/* Put BCSP header */
+	for (i = 0; i < 4; i++) {
+		bcsp_slip_one_byte(nskb, hdr[i]);
+
+		if (bcsp->use_crc)
+			bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]);
+	}
+
+	/* Put payload */
+	for (i = 0; i < len; i++) {
+		bcsp_slip_one_byte(nskb, data[i]);
+
+		if (bcsp->use_crc)
+			bcsp_crc_update(&bcsp_txmsg_crc, data[i]);
+	}
+
+	/* Put CRC */
+	if (bcsp->use_crc) {
+		bcsp_txmsg_crc = bitrev16(bcsp_txmsg_crc);
+		bcsp_slip_one_byte(nskb, (u8)((bcsp_txmsg_crc >> 8) & 0x00ff));
+		bcsp_slip_one_byte(nskb, (u8)(bcsp_txmsg_crc & 0x00ff));
+	}
+
+	bcsp_slip_msgdelim(nskb);
+	return nskb;
+}
+
+/* This is a rewrite of pkt_avail in ABCSP */
+static struct sk_buff *bcsp_dequeue(struct hci_uart *hu)
+{
+	struct bcsp_struct *bcsp = hu->priv;
+	unsigned long flags;
+	struct sk_buff *skb;
+
+	/* First of all, check for unreliable messages in the queue,
+	 * since they have priority
+	 */
+
+	skb = skb_dequeue(&bcsp->unrel);
+	if (skb != NULL) {
+		struct sk_buff *nskb;
+
+		nskb = bcsp_prepare_pkt(bcsp, skb->data, skb->len,
+					hci_skb_pkt_type(skb));
+		if (nskb) {
+			kfree_skb(skb);
+			return nskb;
+		} else {
+			skb_queue_head(&bcsp->unrel, skb);
+			BT_ERR("Could not dequeue pkt because alloc_skb failed");
+		}
+	}
+
+	/* Now, try to send a reliable pkt. We can only send a
+	 * reliable packet if the number of packets sent but not yet ack'ed
+	 * is < than the winsize
+	 */
+
+	spin_lock_irqsave_nested(&bcsp->unack.lock, flags, SINGLE_DEPTH_NESTING);
+
+	if (bcsp->unack.qlen < BCSP_TXWINSIZE) {
+		skb = skb_dequeue(&bcsp->rel);
+		if (skb != NULL) {
+			struct sk_buff *nskb;
+
+			nskb = bcsp_prepare_pkt(bcsp, skb->data, skb->len,
+						hci_skb_pkt_type(skb));
+			if (nskb) {
+				__skb_queue_tail(&bcsp->unack, skb);
+				mod_timer(&bcsp->tbcsp, jiffies + HZ / 4);
+				spin_unlock_irqrestore(&bcsp->unack.lock, flags);
+				return nskb;
+			} else {
+				skb_queue_head(&bcsp->rel, skb);
+				BT_ERR("Could not dequeue pkt because alloc_skb failed");
+			}
+		}
+	}
+
+	spin_unlock_irqrestore(&bcsp->unack.lock, flags);
+
+	/* We could not send a reliable packet, either because there are
+	 * none or because there are too many unack'ed pkts. Did we receive
+	 * any packets we have not acknowledged yet ?
+	 */
+
+	if (bcsp->txack_req) {
+		/* if so, craft an empty ACK pkt and send it on BCSP unreliable
+		 * channel 0
+		 */
+		struct sk_buff *nskb = bcsp_prepare_pkt(bcsp, NULL, 0, BCSP_ACK_PKT);
+		return nskb;
+	}
+
+	/* We have nothing to send */
+	return NULL;
+}
+
+static int bcsp_flush(struct hci_uart *hu)
+{
+	BT_DBG("hu %p", hu);
+	return 0;
+}
+
+/* Remove ack'ed packets */
+static void bcsp_pkt_cull(struct bcsp_struct *bcsp)
+{
+	struct sk_buff *skb, *tmp;
+	unsigned long flags;
+	int i, pkts_to_be_removed;
+	u8 seqno;
+
+	spin_lock_irqsave(&bcsp->unack.lock, flags);
+
+	pkts_to_be_removed = skb_queue_len(&bcsp->unack);
+	seqno = bcsp->msgq_txseq;
+
+	while (pkts_to_be_removed) {
+		if (bcsp->rxack == seqno)
+			break;
+		pkts_to_be_removed--;
+		seqno = (seqno - 1) & 0x07;
+	}
+
+	if (bcsp->rxack != seqno)
+		BT_ERR("Peer acked invalid packet");
+
+	BT_DBG("Removing %u pkts out of %u, up to seqno %u",
+	       pkts_to_be_removed, skb_queue_len(&bcsp->unack),
+	       (seqno - 1) & 0x07);
+
+	i = 0;
+	skb_queue_walk_safe(&bcsp->unack, skb, tmp) {
+		if (i >= pkts_to_be_removed)
+			break;
+		i++;
+
+		__skb_unlink(skb, &bcsp->unack);
+		dev_kfree_skb_irq(skb);
+	}
+
+	if (skb_queue_empty(&bcsp->unack))
+		del_timer(&bcsp->tbcsp);
+
+	spin_unlock_irqrestore(&bcsp->unack.lock, flags);
+
+	if (i != pkts_to_be_removed)
+		BT_ERR("Removed only %u out of %u pkts", i, pkts_to_be_removed);
+}
+
+/* Handle BCSP link-establishment packets. When we
+ * detect a "sync" packet, symptom that the BT module has reset,
+ * we do nothing :) (yet)
+ */
+static void bcsp_handle_le_pkt(struct hci_uart *hu)
+{
+	struct bcsp_struct *bcsp = hu->priv;
+	u8 conf_pkt[4]     = { 0xad, 0xef, 0xac, 0xed };
+	u8 conf_rsp_pkt[4] = { 0xde, 0xad, 0xd0, 0xd0 };
+	u8 sync_pkt[4]     = { 0xda, 0xdc, 0xed, 0xed };
+
+	/* spot "conf" pkts and reply with a "conf rsp" pkt */
+	if (bcsp->rx_skb->data[1] >> 4 == 4 && bcsp->rx_skb->data[2] == 0 &&
+	    !memcmp(&bcsp->rx_skb->data[4], conf_pkt, 4)) {
+		struct sk_buff *nskb = alloc_skb(4, GFP_ATOMIC);
+
+		BT_DBG("Found a LE conf pkt");
+		if (!nskb)
+			return;
+		skb_put_data(nskb, conf_rsp_pkt, 4);
+		hci_skb_pkt_type(nskb) = BCSP_LE_PKT;
+
+		skb_queue_head(&bcsp->unrel, nskb);
+		hci_uart_tx_wakeup(hu);
+	}
+	/* Spot "sync" pkts. If we find one...disaster! */
+	else if (bcsp->rx_skb->data[1] >> 4 == 4 && bcsp->rx_skb->data[2] == 0 &&
+		 !memcmp(&bcsp->rx_skb->data[4], sync_pkt, 4)) {
+		BT_ERR("Found a LE sync pkt, card has reset");
+	}
+}
+
+static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char byte)
+{
+	const u8 c0 = 0xc0, db = 0xdb;
+
+	switch (bcsp->rx_esc_state) {
+	case BCSP_ESCSTATE_NOESC:
+		switch (byte) {
+		case 0xdb:
+			bcsp->rx_esc_state = BCSP_ESCSTATE_ESC;
+			break;
+		default:
+			skb_put_data(bcsp->rx_skb, &byte, 1);
+			if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
+			    bcsp->rx_state != BCSP_W4_CRC)
+				bcsp_crc_update(&bcsp->message_crc, byte);
+			bcsp->rx_count--;
+		}
+		break;
+
+	case BCSP_ESCSTATE_ESC:
+		switch (byte) {
+		case 0xdc:
+			skb_put_data(bcsp->rx_skb, &c0, 1);
+			if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
+			    bcsp->rx_state != BCSP_W4_CRC)
+				bcsp_crc_update(&bcsp->message_crc, 0xc0);
+			bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
+			bcsp->rx_count--;
+			break;
+
+		case 0xdd:
+			skb_put_data(bcsp->rx_skb, &db, 1);
+			if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
+			    bcsp->rx_state != BCSP_W4_CRC)
+				bcsp_crc_update(&bcsp->message_crc, 0xdb);
+			bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
+			bcsp->rx_count--;
+			break;
+
+		default:
+			BT_ERR("Invalid byte %02x after esc byte", byte);
+			kfree_skb(bcsp->rx_skb);
+			bcsp->rx_skb = NULL;
+			bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
+			bcsp->rx_count = 0;
+		}
+	}
+}
+
+static void bcsp_complete_rx_pkt(struct hci_uart *hu)
+{
+	struct bcsp_struct *bcsp = hu->priv;
+	int pass_up = 0;
+
+	if (bcsp->rx_skb->data[0] & 0x80) {	/* reliable pkt */
+		BT_DBG("Received seqno %u from card", bcsp->rxseq_txack);
+
+		/* check the rx sequence number is as expected */
+		if ((bcsp->rx_skb->data[0] & 0x07) == bcsp->rxseq_txack) {
+			bcsp->rxseq_txack++;
+			bcsp->rxseq_txack %= 0x8;
+		} else {
+			/* handle re-transmitted packet or
+			 * when packet was missed
+			 */
+			BT_ERR("Out-of-order packet arrived, got %u expected %u",
+			       bcsp->rx_skb->data[0] & 0x07, bcsp->rxseq_txack);
+
+			/* do not process out-of-order packet payload */
+			pass_up = 2;
+		}
+
+		/* send current txack value to all received reliable packets */
+		bcsp->txack_req = 1;
+
+		/* If needed, transmit an ack pkt */
+		hci_uart_tx_wakeup(hu);
+	}
+
+	bcsp->rxack = (bcsp->rx_skb->data[0] >> 3) & 0x07;
+	BT_DBG("Request for pkt %u from card", bcsp->rxack);
+
+	/* handle received ACK indications,
+	 * including those from out-of-order packets
+	 */
+	bcsp_pkt_cull(bcsp);
+
+	if (pass_up != 2) {
+		if ((bcsp->rx_skb->data[1] & 0x0f) == 6 &&
+		    (bcsp->rx_skb->data[0] & 0x80)) {
+			hci_skb_pkt_type(bcsp->rx_skb) = HCI_ACLDATA_PKT;
+			pass_up = 1;
+		} else if ((bcsp->rx_skb->data[1] & 0x0f) == 5 &&
+			   (bcsp->rx_skb->data[0] & 0x80)) {
+			hci_skb_pkt_type(bcsp->rx_skb) = HCI_EVENT_PKT;
+			pass_up = 1;
+		} else if ((bcsp->rx_skb->data[1] & 0x0f) == 7) {
+			hci_skb_pkt_type(bcsp->rx_skb) = HCI_SCODATA_PKT;
+			pass_up = 1;
+		} else if ((bcsp->rx_skb->data[1] & 0x0f) == 1 &&
+			   !(bcsp->rx_skb->data[0] & 0x80)) {
+			bcsp_handle_le_pkt(hu);
+			pass_up = 0;
+		} else {
+			pass_up = 0;
+		}
+	}
+
+	if (pass_up == 0) {
+		struct hci_event_hdr hdr;
+		u8 desc = (bcsp->rx_skb->data[1] & 0x0f);
+
+		if (desc != 0 && desc != 1) {
+			if (hciextn) {
+				desc |= 0xc0;
+				skb_pull(bcsp->rx_skb, 4);
+				memcpy(skb_push(bcsp->rx_skb, 1), &desc, 1);
+
+				hdr.evt = 0xff;
+				hdr.plen = bcsp->rx_skb->len;
+				memcpy(skb_push(bcsp->rx_skb, HCI_EVENT_HDR_SIZE), &hdr, HCI_EVENT_HDR_SIZE);
+				hci_skb_pkt_type(bcsp->rx_skb) = HCI_EVENT_PKT;
+
+				hci_recv_frame(hu->hdev, bcsp->rx_skb);
+			} else {
+				BT_ERR("Packet for unknown channel (%u %s)",
+				       bcsp->rx_skb->data[1] & 0x0f,
+				       bcsp->rx_skb->data[0] & 0x80 ?
+				       "reliable" : "unreliable");
+				kfree_skb(bcsp->rx_skb);
+			}
+		} else
+			kfree_skb(bcsp->rx_skb);
+	} else if (pass_up == 1) {
+		/* Pull out BCSP hdr */
+		skb_pull(bcsp->rx_skb, 4);
+
+		hci_recv_frame(hu->hdev, bcsp->rx_skb);
+	} else {
+		/* ignore packet payload of already ACKed re-transmitted
+		 * packets or when a packet was missed in the BCSP window
+		 */
+		kfree_skb(bcsp->rx_skb);
+	}
+
+	bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
+	bcsp->rx_skb = NULL;
+}
+
+static u16 bscp_get_crc(struct bcsp_struct *bcsp)
+{
+	return get_unaligned_be16(&bcsp->rx_skb->data[bcsp->rx_skb->len - 2]);
+}
+
+/* Recv data */
+static int bcsp_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct bcsp_struct *bcsp = hu->priv;
+	const unsigned char *ptr;
+
+	BT_DBG("hu %p count %d rx_state %d rx_count %ld",
+	       hu, count, bcsp->rx_state, bcsp->rx_count);
+
+	ptr = data;
+	while (count) {
+		if (bcsp->rx_count) {
+			if (*ptr == 0xc0) {
+				BT_ERR("Short BCSP packet");
+				kfree_skb(bcsp->rx_skb);
+				bcsp->rx_skb = NULL;
+				bcsp->rx_state = BCSP_W4_PKT_START;
+				bcsp->rx_count = 0;
+			} else
+				bcsp_unslip_one_byte(bcsp, *ptr);
+
+			ptr++; count--;
+			continue;
+		}
+
+		switch (bcsp->rx_state) {
+		case BCSP_W4_BCSP_HDR:
+			if ((0xff & (u8)~(bcsp->rx_skb->data[0] + bcsp->rx_skb->data[1] +
+			    bcsp->rx_skb->data[2])) != bcsp->rx_skb->data[3]) {
+				BT_ERR("Error in BCSP hdr checksum");
+				kfree_skb(bcsp->rx_skb);
+				bcsp->rx_skb = NULL;
+				bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
+				bcsp->rx_count = 0;
+				continue;
+			}
+			bcsp->rx_state = BCSP_W4_DATA;
+			bcsp->rx_count = (bcsp->rx_skb->data[1] >> 4) +
+					(bcsp->rx_skb->data[2] << 4);	/* May be 0 */
+			continue;
+
+		case BCSP_W4_DATA:
+			if (bcsp->rx_skb->data[0] & 0x40) {	/* pkt with crc */
+				bcsp->rx_state = BCSP_W4_CRC;
+				bcsp->rx_count = 2;
+			} else
+				bcsp_complete_rx_pkt(hu);
+			continue;
+
+		case BCSP_W4_CRC:
+			if (bitrev16(bcsp->message_crc) != bscp_get_crc(bcsp)) {
+				BT_ERR("Checksum failed: computed %04x received %04x",
+				       bitrev16(bcsp->message_crc),
+				       bscp_get_crc(bcsp));
+
+				kfree_skb(bcsp->rx_skb);
+				bcsp->rx_skb = NULL;
+				bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
+				bcsp->rx_count = 0;
+				continue;
+			}
+			skb_trim(bcsp->rx_skb, bcsp->rx_skb->len - 2);
+			bcsp_complete_rx_pkt(hu);
+			continue;
+
+		case BCSP_W4_PKT_DELIMITER:
+			switch (*ptr) {
+			case 0xc0:
+				bcsp->rx_state = BCSP_W4_PKT_START;
+				break;
+			default:
+				/*BT_ERR("Ignoring byte %02x", *ptr);*/
+				break;
+			}
+			ptr++; count--;
+			break;
+
+		case BCSP_W4_PKT_START:
+			switch (*ptr) {
+			case 0xc0:
+				ptr++; count--;
+				break;
+
+			default:
+				bcsp->rx_state = BCSP_W4_BCSP_HDR;
+				bcsp->rx_count = 4;
+				bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
+				BCSP_CRC_INIT(bcsp->message_crc);
+
+				/* Do not increment ptr or decrement count
+				 * Allocate packet. Max len of a BCSP pkt=
+				 * 0xFFF (payload) +4 (header) +2 (crc)
+				 */
+
+				bcsp->rx_skb = bt_skb_alloc(0x1005, GFP_ATOMIC);
+				if (!bcsp->rx_skb) {
+					BT_ERR("Can't allocate mem for new packet");
+					bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
+					bcsp->rx_count = 0;
+					return 0;
+				}
+				break;
+			}
+			break;
+		}
+	}
+	return count;
+}
+
+	/* Arrange to retransmit all messages in the relq. */
+static void bcsp_timed_event(struct timer_list *t)
+{
+	struct bcsp_struct *bcsp = from_timer(bcsp, t, tbcsp);
+	struct hci_uart *hu = bcsp->hu;
+	struct sk_buff *skb;
+	unsigned long flags;
+
+	BT_DBG("hu %p retransmitting %u pkts", hu, bcsp->unack.qlen);
+
+	spin_lock_irqsave_nested(&bcsp->unack.lock, flags, SINGLE_DEPTH_NESTING);
+
+	while ((skb = __skb_dequeue_tail(&bcsp->unack)) != NULL) {
+		bcsp->msgq_txseq = (bcsp->msgq_txseq - 1) & 0x07;
+		skb_queue_head(&bcsp->rel, skb);
+	}
+
+	spin_unlock_irqrestore(&bcsp->unack.lock, flags);
+
+	hci_uart_tx_wakeup(hu);
+}
+
+static int bcsp_open(struct hci_uart *hu)
+{
+	struct bcsp_struct *bcsp;
+
+	BT_DBG("hu %p", hu);
+
+	bcsp = kzalloc(sizeof(*bcsp), GFP_KERNEL);
+	if (!bcsp)
+		return -ENOMEM;
+
+	hu->priv = bcsp;
+	bcsp->hu = hu;
+	skb_queue_head_init(&bcsp->unack);
+	skb_queue_head_init(&bcsp->rel);
+	skb_queue_head_init(&bcsp->unrel);
+
+	timer_setup(&bcsp->tbcsp, bcsp_timed_event, 0);
+
+	bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
+
+	if (txcrc)
+		bcsp->use_crc = 1;
+
+	return 0;
+}
+
+static int bcsp_close(struct hci_uart *hu)
+{
+	struct bcsp_struct *bcsp = hu->priv;
+
+	del_timer_sync(&bcsp->tbcsp);
+
+	hu->priv = NULL;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&bcsp->unack);
+	skb_queue_purge(&bcsp->rel);
+	skb_queue_purge(&bcsp->unrel);
+
+	if (bcsp->rx_skb) {
+		kfree_skb(bcsp->rx_skb);
+		bcsp->rx_skb = NULL;
+	}
+
+	kfree(bcsp);
+	return 0;
+}
+
+static const struct hci_uart_proto bcsp = {
+	.id		= HCI_UART_BCSP,
+	.name		= "BCSP",
+	.open		= bcsp_open,
+	.close		= bcsp_close,
+	.enqueue	= bcsp_enqueue,
+	.dequeue	= bcsp_dequeue,
+	.recv		= bcsp_recv,
+	.flush		= bcsp_flush
+};
+
+int __init bcsp_init(void)
+{
+	return hci_uart_register_proto(&bcsp);
+}
+
+int __exit bcsp_deinit(void)
+{
+	return hci_uart_unregister_proto(&bcsp);
+}
+
+module_param(txcrc, bool, 0644);
+MODULE_PARM_DESC(txcrc, "Transmit CRC with every BCSP packet");
+
+module_param(hciextn, bool, 0644);
+MODULE_PARM_DESC(hciextn, "Convert HCI Extensions into BCSP packets");
diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
new file mode 100644
index 000000000..1d0cdf023
--- /dev/null
+++ b/drivers/bluetooth/hci_h4.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Bluetooth HCI UART driver
+ *
+ *  Copyright (C) 2000-2001  Qualcomm Incorporated
+ *  Copyright (C) 2002-2003  Maxim Krasnyansky <maxk@qualcomm.com>
+ *  Copyright (C) 2004-2005  Marcel Holtmann <marcel@holtmann.org>
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/poll.h>
+
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/ioctl.h>
+#include <linux/skbuff.h>
+#include <asm/unaligned.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+
+struct h4_struct {
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+};
+
+/* Initialize protocol */
+static int h4_open(struct hci_uart *hu)
+{
+	struct h4_struct *h4;
+
+	BT_DBG("hu %p", hu);
+
+	h4 = kzalloc(sizeof(*h4), GFP_KERNEL);
+	if (!h4)
+		return -ENOMEM;
+
+	skb_queue_head_init(&h4->txq);
+
+	hu->priv = h4;
+	return 0;
+}
+
+/* Flush protocol data */
+static int h4_flush(struct hci_uart *hu)
+{
+	struct h4_struct *h4 = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&h4->txq);
+
+	return 0;
+}
+
+/* Close protocol */
+static int h4_close(struct hci_uart *hu)
+{
+	struct h4_struct *h4 = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&h4->txq);
+
+	kfree_skb(h4->rx_skb);
+
+	hu->priv = NULL;
+	kfree(h4);
+
+	return 0;
+}
+
+/* Enqueue frame for transmission (padding, crc, etc) */
+static int h4_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct h4_struct *h4 = hu->priv;
+
+	BT_DBG("hu %p skb %p", hu, skb);
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+	skb_queue_tail(&h4->txq, skb);
+
+	return 0;
+}
+
+static const struct h4_recv_pkt h4_recv_pkts[] = {
+	{ H4_RECV_ACL,   .recv = hci_recv_frame },
+	{ H4_RECV_SCO,   .recv = hci_recv_frame },
+	{ H4_RECV_EVENT, .recv = hci_recv_frame },
+	{ H4_RECV_ISO,   .recv = hci_recv_frame },
+};
+
+/* Recv data */
+static int h4_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct h4_struct *h4 = hu->priv;
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	h4->rx_skb = h4_recv_buf(hu->hdev, h4->rx_skb, data, count,
+				 h4_recv_pkts, ARRAY_SIZE(h4_recv_pkts));
+	if (IS_ERR(h4->rx_skb)) {
+		int err = PTR_ERR(h4->rx_skb);
+		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+		h4->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
+static struct sk_buff *h4_dequeue(struct hci_uart *hu)
+{
+	struct h4_struct *h4 = hu->priv;
+	return skb_dequeue(&h4->txq);
+}
+
+static const struct hci_uart_proto h4p = {
+	.id		= HCI_UART_H4,
+	.name		= "H4",
+	.open		= h4_open,
+	.close		= h4_close,
+	.recv		= h4_recv,
+	.enqueue	= h4_enqueue,
+	.dequeue	= h4_dequeue,
+	.flush		= h4_flush,
+};
+
+int __init h4_init(void)
+{
+	return hci_uart_register_proto(&h4p);
+}
+
+int __exit h4_deinit(void)
+{
+	return hci_uart_unregister_proto(&h4p);
+}
+
+struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
+			    const unsigned char *buffer, int count,
+			    const struct h4_recv_pkt *pkts, int pkts_count)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	u8 alignment = hu->alignment ? hu->alignment : 1;
+
+	/* Check for error from previous call */
+	if (IS_ERR(skb))
+		skb = NULL;
+
+	while (count) {
+		int i, len;
+
+		/* remove padding bytes from buffer */
+		for (; hu->padding && count > 0; hu->padding--) {
+			count--;
+			buffer++;
+		}
+		if (!count)
+			break;
+
+		if (!skb) {
+			for (i = 0; i < pkts_count; i++) {
+				if (buffer[0] != (&pkts[i])->type)
+					continue;
+
+				skb = bt_skb_alloc((&pkts[i])->maxlen,
+						   GFP_ATOMIC);
+				if (!skb)
+					return ERR_PTR(-ENOMEM);
+
+				hci_skb_pkt_type(skb) = (&pkts[i])->type;
+				hci_skb_expect(skb) = (&pkts[i])->hlen;
+				break;
+			}
+
+			/* Check for invalid packet type */
+			if (!skb)
+				return ERR_PTR(-EILSEQ);
+
+			count -= 1;
+			buffer += 1;
+		}
+
+		len = min_t(uint, hci_skb_expect(skb) - skb->len, count);
+		skb_put_data(skb, buffer, len);
+
+		count -= len;
+		buffer += len;
+
+		/* Check for partial packet */
+		if (skb->len < hci_skb_expect(skb))
+			continue;
+
+		for (i = 0; i < pkts_count; i++) {
+			if (hci_skb_pkt_type(skb) == (&pkts[i])->type)
+				break;
+		}
+
+		if (i >= pkts_count) {
+			kfree_skb(skb);
+			return ERR_PTR(-EILSEQ);
+		}
+
+		if (skb->len == (&pkts[i])->hlen) {
+			u16 dlen;
+
+			switch ((&pkts[i])->lsize) {
+			case 0:
+				/* No variable data length */
+				dlen = 0;
+				break;
+			case 1:
+				/* Single octet variable length */
+				dlen = skb->data[(&pkts[i])->loff];
+				hci_skb_expect(skb) += dlen;
+
+				if (skb_tailroom(skb) < dlen) {
+					kfree_skb(skb);
+					return ERR_PTR(-EMSGSIZE);
+				}
+				break;
+			case 2:
+				/* Double octet variable length */
+				dlen = get_unaligned_le16(skb->data +
+							  (&pkts[i])->loff);
+				hci_skb_expect(skb) += dlen;
+
+				if (skb_tailroom(skb) < dlen) {
+					kfree_skb(skb);
+					return ERR_PTR(-EMSGSIZE);
+				}
+				break;
+			default:
+				/* Unsupported variable length */
+				kfree_skb(skb);
+				return ERR_PTR(-EILSEQ);
+			}
+
+			if (!dlen) {
+				hu->padding = (skb->len + 1) % alignment;
+				hu->padding = (alignment - hu->padding) % alignment;
+
+				/* No more data, complete frame */
+				(&pkts[i])->recv(hdev, skb);
+				skb = NULL;
+			}
+		} else {
+			hu->padding = (skb->len + 1) % alignment;
+			hu->padding = (alignment - hu->padding) % alignment;
+
+			/* Complete frame */
+			(&pkts[i])->recv(hdev, skb);
+			skb = NULL;
+		}
+	}
+
+	return skb;
+}
+EXPORT_SYMBOL_GPL(h4_recv_buf);
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
new file mode 100644
index 000000000..e90670955
--- /dev/null
+++ b/drivers/bluetooth/hci_h5.c
@@ -0,0 +1,1135 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Bluetooth HCI Three-wire UART driver
+ *
+ *  Copyright (C) 2012  Intel Corporation
+ */
+
+#include <linux/acpi.h>
+#include <linux/errno.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/serdev.h>
+#include <linux/skbuff.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btrtl.h"
+#include "hci_uart.h"
+
+#define SUSPEND_TIMEOUT_MS	6000
+
+#define HCI_3WIRE_ACK_PKT	0
+#define HCI_3WIRE_LINK_PKT	15
+
+/* Sliding window size */
+#define H5_TX_WIN_MAX		4
+
+#define H5_ACK_TIMEOUT	msecs_to_jiffies(250)
+#define H5_SYNC_TIMEOUT	msecs_to_jiffies(100)
+
+/*
+ * Maximum Three-wire packet:
+ *     4 byte header + max value for 12-bit length + 2 bytes for CRC
+ */
+#define H5_MAX_LEN (4 + 0xfff + 2)
+
+/* Convenience macros for reading Three-wire header values */
+#define H5_HDR_SEQ(hdr)		((hdr)[0] & 0x07)
+#define H5_HDR_ACK(hdr)		(((hdr)[0] >> 3) & 0x07)
+#define H5_HDR_CRC(hdr)		(((hdr)[0] >> 6) & 0x01)
+#define H5_HDR_RELIABLE(hdr)	(((hdr)[0] >> 7) & 0x01)
+#define H5_HDR_PKT_TYPE(hdr)	((hdr)[1] & 0x0f)
+#define H5_HDR_LEN(hdr)		((((hdr)[1] >> 4) & 0x0f) + ((hdr)[2] << 4))
+
+#define SLIP_DELIMITER	0xc0
+#define SLIP_ESC	0xdb
+#define SLIP_ESC_DELIM	0xdc
+#define SLIP_ESC_ESC	0xdd
+
+/* H5 state flags */
+enum {
+	H5_RX_ESC,		/* SLIP escape mode */
+	H5_TX_ACK_REQ,		/* Pending ack to send */
+	H5_WAKEUP_DISABLE,	/* Device cannot wake host */
+	H5_HW_FLOW_CONTROL,	/* Use HW flow control */
+};
+
+struct h5 {
+	/* Must be the first member, hci_serdev.c expects this. */
+	struct hci_uart		serdev_hu;
+
+	struct sk_buff_head	unack;		/* Unack'ed packets queue */
+	struct sk_buff_head	rel;		/* Reliable packets queue */
+	struct sk_buff_head	unrel;		/* Unreliable packets queue */
+
+	unsigned long		flags;
+
+	struct sk_buff		*rx_skb;	/* Receive buffer */
+	size_t			rx_pending;	/* Expecting more bytes */
+	u8			rx_ack;		/* Last ack number received */
+
+	int			(*rx_func)(struct hci_uart *hu, u8 c);
+
+	struct timer_list	timer;		/* Retransmission timer */
+	struct hci_uart		*hu;		/* Parent HCI UART */
+
+	u8			tx_seq;		/* Next seq number to send */
+	u8			tx_ack;		/* Next ack number to send */
+	u8			tx_win;		/* Sliding window size */
+
+	enum {
+		H5_UNINITIALIZED,
+		H5_INITIALIZED,
+		H5_ACTIVE,
+	} state;
+
+	enum {
+		H5_AWAKE,
+		H5_SLEEPING,
+		H5_WAKING_UP,
+	} sleep;
+
+	const struct h5_vnd *vnd;
+	const char *id;
+
+	struct gpio_desc *enable_gpio;
+	struct gpio_desc *device_wake_gpio;
+};
+
+enum h5_driver_info {
+	H5_INFO_WAKEUP_DISABLE = BIT(0),
+};
+
+struct h5_vnd {
+	int (*setup)(struct h5 *h5);
+	void (*open)(struct h5 *h5);
+	void (*close)(struct h5 *h5);
+	int (*suspend)(struct h5 *h5);
+	int (*resume)(struct h5 *h5);
+	const struct acpi_gpio_mapping *acpi_gpio_map;
+};
+
+struct h5_device_data {
+	uint32_t driver_info;
+	struct h5_vnd *vnd;
+};
+
+static void h5_reset_rx(struct h5 *h5);
+
+static void h5_link_control(struct hci_uart *hu, const void *data, size_t len)
+{
+	struct h5 *h5 = hu->priv;
+	struct sk_buff *nskb;
+
+	nskb = alloc_skb(3, GFP_ATOMIC);
+	if (!nskb)
+		return;
+
+	hci_skb_pkt_type(nskb) = HCI_3WIRE_LINK_PKT;
+
+	skb_put_data(nskb, data, len);
+
+	skb_queue_tail(&h5->unrel, nskb);
+}
+
+static u8 h5_cfg_field(struct h5 *h5)
+{
+	/* Sliding window size (first 3 bits) */
+	return h5->tx_win & 0x07;
+}
+
+static void h5_timed_event(struct timer_list *t)
+{
+	const unsigned char sync_req[] = { 0x01, 0x7e };
+	unsigned char conf_req[3] = { 0x03, 0xfc };
+	struct h5 *h5 = from_timer(h5, t, timer);
+	struct hci_uart *hu = h5->hu;
+	struct sk_buff *skb;
+	unsigned long flags;
+
+	BT_DBG("%s", hu->hdev->name);
+
+	if (h5->state == H5_UNINITIALIZED)
+		h5_link_control(hu, sync_req, sizeof(sync_req));
+
+	if (h5->state == H5_INITIALIZED) {
+		conf_req[2] = h5_cfg_field(h5);
+		h5_link_control(hu, conf_req, sizeof(conf_req));
+	}
+
+	if (h5->state != H5_ACTIVE) {
+		mod_timer(&h5->timer, jiffies + H5_SYNC_TIMEOUT);
+		goto wakeup;
+	}
+
+	if (h5->sleep != H5_AWAKE) {
+		h5->sleep = H5_SLEEPING;
+		goto wakeup;
+	}
+
+	BT_DBG("hu %p retransmitting %u pkts", hu, h5->unack.qlen);
+
+	spin_lock_irqsave_nested(&h5->unack.lock, flags, SINGLE_DEPTH_NESTING);
+
+	while ((skb = __skb_dequeue_tail(&h5->unack)) != NULL) {
+		h5->tx_seq = (h5->tx_seq - 1) & 0x07;
+		skb_queue_head(&h5->rel, skb);
+	}
+
+	spin_unlock_irqrestore(&h5->unack.lock, flags);
+
+wakeup:
+	hci_uart_tx_wakeup(hu);
+}
+
+static void h5_peer_reset(struct hci_uart *hu)
+{
+	struct h5 *h5 = hu->priv;
+
+	bt_dev_err(hu->hdev, "Peer device has reset");
+
+	h5->state = H5_UNINITIALIZED;
+
+	del_timer(&h5->timer);
+
+	skb_queue_purge(&h5->rel);
+	skb_queue_purge(&h5->unrel);
+	skb_queue_purge(&h5->unack);
+
+	h5->tx_seq = 0;
+	h5->tx_ack = 0;
+
+	/* Send reset request to upper stack */
+	hci_reset_dev(hu->hdev);
+}
+
+static int h5_open(struct hci_uart *hu)
+{
+	struct h5 *h5;
+	const unsigned char sync[] = { 0x01, 0x7e };
+
+	BT_DBG("hu %p", hu);
+
+	if (hu->serdev) {
+		h5 = serdev_device_get_drvdata(hu->serdev);
+	} else {
+		h5 = kzalloc(sizeof(*h5), GFP_KERNEL);
+		if (!h5)
+			return -ENOMEM;
+	}
+
+	hu->priv = h5;
+	h5->hu = hu;
+
+	skb_queue_head_init(&h5->unack);
+	skb_queue_head_init(&h5->rel);
+	skb_queue_head_init(&h5->unrel);
+
+	h5_reset_rx(h5);
+
+	timer_setup(&h5->timer, h5_timed_event, 0);
+
+	h5->tx_win = H5_TX_WIN_MAX;
+
+	if (h5->vnd && h5->vnd->open)
+		h5->vnd->open(h5);
+
+	set_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags);
+
+	/* Send initial sync request */
+	h5_link_control(hu, sync, sizeof(sync));
+	mod_timer(&h5->timer, jiffies + H5_SYNC_TIMEOUT);
+
+	return 0;
+}
+
+static int h5_close(struct hci_uart *hu)
+{
+	struct h5 *h5 = hu->priv;
+
+	del_timer_sync(&h5->timer);
+
+	skb_queue_purge(&h5->unack);
+	skb_queue_purge(&h5->rel);
+	skb_queue_purge(&h5->unrel);
+
+	kfree_skb(h5->rx_skb);
+	h5->rx_skb = NULL;
+
+	if (h5->vnd && h5->vnd->close)
+		h5->vnd->close(h5);
+
+	if (!hu->serdev)
+		kfree(h5);
+
+	return 0;
+}
+
+static int h5_setup(struct hci_uart *hu)
+{
+	struct h5 *h5 = hu->priv;
+
+	if (h5->vnd && h5->vnd->setup)
+		return h5->vnd->setup(h5);
+
+	return 0;
+}
+
+static void h5_pkt_cull(struct h5 *h5)
+{
+	struct sk_buff *skb, *tmp;
+	unsigned long flags;
+	int i, to_remove;
+	u8 seq;
+
+	spin_lock_irqsave(&h5->unack.lock, flags);
+
+	to_remove = skb_queue_len(&h5->unack);
+	if (to_remove == 0)
+		goto unlock;
+
+	seq = h5->tx_seq;
+
+	while (to_remove > 0) {
+		if (h5->rx_ack == seq)
+			break;
+
+		to_remove--;
+		seq = (seq - 1) & 0x07;
+	}
+
+	if (seq != h5->rx_ack)
+		BT_ERR("Controller acked invalid packet");
+
+	i = 0;
+	skb_queue_walk_safe(&h5->unack, skb, tmp) {
+		if (i++ >= to_remove)
+			break;
+
+		__skb_unlink(skb, &h5->unack);
+		dev_kfree_skb_irq(skb);
+	}
+
+	if (skb_queue_empty(&h5->unack))
+		del_timer(&h5->timer);
+
+unlock:
+	spin_unlock_irqrestore(&h5->unack.lock, flags);
+}
+
+static void h5_handle_internal_rx(struct hci_uart *hu)
+{
+	struct h5 *h5 = hu->priv;
+	const unsigned char sync_req[] = { 0x01, 0x7e };
+	const unsigned char sync_rsp[] = { 0x02, 0x7d };
+	unsigned char conf_req[3] = { 0x03, 0xfc };
+	const unsigned char conf_rsp[] = { 0x04, 0x7b };
+	const unsigned char wakeup_req[] = { 0x05, 0xfa };
+	const unsigned char woken_req[] = { 0x06, 0xf9 };
+	const unsigned char sleep_req[] = { 0x07, 0x78 };
+	const unsigned char *hdr = h5->rx_skb->data;
+	const unsigned char *data = &h5->rx_skb->data[4];
+
+	BT_DBG("%s", hu->hdev->name);
+
+	if (H5_HDR_PKT_TYPE(hdr) != HCI_3WIRE_LINK_PKT)
+		return;
+
+	if (H5_HDR_LEN(hdr) < 2)
+		return;
+
+	conf_req[2] = h5_cfg_field(h5);
+
+	if (memcmp(data, sync_req, 2) == 0) {
+		if (h5->state == H5_ACTIVE)
+			h5_peer_reset(hu);
+		h5_link_control(hu, sync_rsp, 2);
+	} else if (memcmp(data, sync_rsp, 2) == 0) {
+		if (h5->state == H5_ACTIVE)
+			h5_peer_reset(hu);
+		h5->state = H5_INITIALIZED;
+		h5_link_control(hu, conf_req, 3);
+	} else if (memcmp(data, conf_req, 2) == 0) {
+		h5_link_control(hu, conf_rsp, 2);
+		h5_link_control(hu, conf_req, 3);
+	} else if (memcmp(data, conf_rsp, 2) == 0) {
+		if (H5_HDR_LEN(hdr) > 2)
+			h5->tx_win = (data[2] & 0x07);
+		BT_DBG("Three-wire init complete. tx_win %u", h5->tx_win);
+		h5->state = H5_ACTIVE;
+		hci_uart_init_ready(hu);
+		return;
+	} else if (memcmp(data, sleep_req, 2) == 0) {
+		BT_DBG("Peer went to sleep");
+		h5->sleep = H5_SLEEPING;
+		return;
+	} else if (memcmp(data, woken_req, 2) == 0) {
+		BT_DBG("Peer woke up");
+		h5->sleep = H5_AWAKE;
+	} else if (memcmp(data, wakeup_req, 2) == 0) {
+		BT_DBG("Peer requested wakeup");
+		h5_link_control(hu, woken_req, 2);
+		h5->sleep = H5_AWAKE;
+	} else {
+		BT_DBG("Link Control: 0x%02hhx 0x%02hhx", data[0], data[1]);
+		return;
+	}
+
+	hci_uart_tx_wakeup(hu);
+}
+
+static void h5_complete_rx_pkt(struct hci_uart *hu)
+{
+	struct h5 *h5 = hu->priv;
+	const unsigned char *hdr = h5->rx_skb->data;
+
+	if (H5_HDR_RELIABLE(hdr)) {
+		h5->tx_ack = (h5->tx_ack + 1) % 8;
+		set_bit(H5_TX_ACK_REQ, &h5->flags);
+		hci_uart_tx_wakeup(hu);
+	}
+
+	h5->rx_ack = H5_HDR_ACK(hdr);
+
+	h5_pkt_cull(h5);
+
+	switch (H5_HDR_PKT_TYPE(hdr)) {
+	case HCI_EVENT_PKT:
+	case HCI_ACLDATA_PKT:
+	case HCI_SCODATA_PKT:
+	case HCI_ISODATA_PKT:
+		hci_skb_pkt_type(h5->rx_skb) = H5_HDR_PKT_TYPE(hdr);
+
+		/* Remove Three-wire header */
+		skb_pull(h5->rx_skb, 4);
+
+		hci_recv_frame(hu->hdev, h5->rx_skb);
+		h5->rx_skb = NULL;
+
+		break;
+
+	default:
+		h5_handle_internal_rx(hu);
+		break;
+	}
+
+	h5_reset_rx(h5);
+}
+
+static int h5_rx_crc(struct hci_uart *hu, unsigned char c)
+{
+	h5_complete_rx_pkt(hu);
+
+	return 0;
+}
+
+static int h5_rx_payload(struct hci_uart *hu, unsigned char c)
+{
+	struct h5 *h5 = hu->priv;
+	const unsigned char *hdr = h5->rx_skb->data;
+
+	if (H5_HDR_CRC(hdr)) {
+		h5->rx_func = h5_rx_crc;
+		h5->rx_pending = 2;
+	} else {
+		h5_complete_rx_pkt(hu);
+	}
+
+	return 0;
+}
+
+static int h5_rx_3wire_hdr(struct hci_uart *hu, unsigned char c)
+{
+	struct h5 *h5 = hu->priv;
+	const unsigned char *hdr = h5->rx_skb->data;
+
+	BT_DBG("%s rx: seq %u ack %u crc %u rel %u type %u len %u",
+	       hu->hdev->name, H5_HDR_SEQ(hdr), H5_HDR_ACK(hdr),
+	       H5_HDR_CRC(hdr), H5_HDR_RELIABLE(hdr), H5_HDR_PKT_TYPE(hdr),
+	       H5_HDR_LEN(hdr));
+
+	if (((hdr[0] + hdr[1] + hdr[2] + hdr[3]) & 0xff) != 0xff) {
+		bt_dev_err(hu->hdev, "Invalid header checksum");
+		h5_reset_rx(h5);
+		return 0;
+	}
+
+	if (H5_HDR_RELIABLE(hdr) && H5_HDR_SEQ(hdr) != h5->tx_ack) {
+		bt_dev_err(hu->hdev, "Out-of-order packet arrived (%u != %u)",
+			   H5_HDR_SEQ(hdr), h5->tx_ack);
+		h5_reset_rx(h5);
+		return 0;
+	}
+
+	if (h5->state != H5_ACTIVE &&
+	    H5_HDR_PKT_TYPE(hdr) != HCI_3WIRE_LINK_PKT) {
+		bt_dev_err(hu->hdev, "Non-link packet received in non-active state");
+		h5_reset_rx(h5);
+		return 0;
+	}
+
+	h5->rx_func = h5_rx_payload;
+	h5->rx_pending = H5_HDR_LEN(hdr);
+
+	return 0;
+}
+
+static int h5_rx_pkt_start(struct hci_uart *hu, unsigned char c)
+{
+	struct h5 *h5 = hu->priv;
+
+	if (c == SLIP_DELIMITER)
+		return 1;
+
+	h5->rx_func = h5_rx_3wire_hdr;
+	h5->rx_pending = 4;
+
+	h5->rx_skb = bt_skb_alloc(H5_MAX_LEN, GFP_ATOMIC);
+	if (!h5->rx_skb) {
+		bt_dev_err(hu->hdev, "Can't allocate mem for new packet");
+		h5_reset_rx(h5);
+		return -ENOMEM;
+	}
+
+	h5->rx_skb->dev = (void *)hu->hdev;
+
+	return 0;
+}
+
+static int h5_rx_delimiter(struct hci_uart *hu, unsigned char c)
+{
+	struct h5 *h5 = hu->priv;
+
+	if (c == SLIP_DELIMITER)
+		h5->rx_func = h5_rx_pkt_start;
+
+	return 1;
+}
+
+static void h5_unslip_one_byte(struct h5 *h5, unsigned char c)
+{
+	const u8 delim = SLIP_DELIMITER, esc = SLIP_ESC;
+	const u8 *byte = &c;
+
+	if (!test_bit(H5_RX_ESC, &h5->flags) && c == SLIP_ESC) {
+		set_bit(H5_RX_ESC, &h5->flags);
+		return;
+	}
+
+	if (test_and_clear_bit(H5_RX_ESC, &h5->flags)) {
+		switch (c) {
+		case SLIP_ESC_DELIM:
+			byte = &delim;
+			break;
+		case SLIP_ESC_ESC:
+			byte = &esc;
+			break;
+		default:
+			BT_ERR("Invalid esc byte 0x%02hhx", c);
+			h5_reset_rx(h5);
+			return;
+		}
+	}
+
+	skb_put_data(h5->rx_skb, byte, 1);
+	h5->rx_pending--;
+
+	BT_DBG("unslipped 0x%02hhx, rx_pending %zu", *byte, h5->rx_pending);
+}
+
+static void h5_reset_rx(struct h5 *h5)
+{
+	if (h5->rx_skb) {
+		kfree_skb(h5->rx_skb);
+		h5->rx_skb = NULL;
+	}
+
+	h5->rx_func = h5_rx_delimiter;
+	h5->rx_pending = 0;
+	clear_bit(H5_RX_ESC, &h5->flags);
+}
+
+static int h5_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct h5 *h5 = hu->priv;
+	const unsigned char *ptr = data;
+
+	BT_DBG("%s pending %zu count %d", hu->hdev->name, h5->rx_pending,
+	       count);
+
+	while (count > 0) {
+		int processed;
+
+		if (h5->rx_pending > 0) {
+			if (*ptr == SLIP_DELIMITER) {
+				bt_dev_err(hu->hdev, "Too short H5 packet");
+				h5_reset_rx(h5);
+				continue;
+			}
+
+			h5_unslip_one_byte(h5, *ptr);
+
+			ptr++; count--;
+			continue;
+		}
+
+		processed = h5->rx_func(hu, *ptr);
+		if (processed < 0)
+			return processed;
+
+		ptr += processed;
+		count -= processed;
+	}
+
+	if (hu->serdev) {
+		pm_runtime_get(&hu->serdev->dev);
+		pm_runtime_mark_last_busy(&hu->serdev->dev);
+		pm_runtime_put_autosuspend(&hu->serdev->dev);
+	}
+
+	return 0;
+}
+
+static int h5_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct h5 *h5 = hu->priv;
+
+	if (skb->len > 0xfff) {
+		bt_dev_err(hu->hdev, "Packet too long (%u bytes)", skb->len);
+		kfree_skb(skb);
+		return 0;
+	}
+
+	if (h5->state != H5_ACTIVE) {
+		bt_dev_err(hu->hdev, "Ignoring HCI data in non-active state");
+		kfree_skb(skb);
+		return 0;
+	}
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_ACLDATA_PKT:
+	case HCI_COMMAND_PKT:
+		skb_queue_tail(&h5->rel, skb);
+		break;
+
+	case HCI_SCODATA_PKT:
+	case HCI_ISODATA_PKT:
+		skb_queue_tail(&h5->unrel, skb);
+		break;
+
+	default:
+		bt_dev_err(hu->hdev, "Unknown packet type %u", hci_skb_pkt_type(skb));
+		kfree_skb(skb);
+		break;
+	}
+
+	if (hu->serdev) {
+		pm_runtime_get_sync(&hu->serdev->dev);
+		pm_runtime_mark_last_busy(&hu->serdev->dev);
+		pm_runtime_put_autosuspend(&hu->serdev->dev);
+	}
+
+	return 0;
+}
+
+static void h5_slip_delim(struct sk_buff *skb)
+{
+	const char delim = SLIP_DELIMITER;
+
+	skb_put_data(skb, &delim, 1);
+}
+
+static void h5_slip_one_byte(struct sk_buff *skb, u8 c)
+{
+	const char esc_delim[2] = { SLIP_ESC, SLIP_ESC_DELIM };
+	const char esc_esc[2] = { SLIP_ESC, SLIP_ESC_ESC };
+
+	switch (c) {
+	case SLIP_DELIMITER:
+		skb_put_data(skb, &esc_delim, 2);
+		break;
+	case SLIP_ESC:
+		skb_put_data(skb, &esc_esc, 2);
+		break;
+	default:
+		skb_put_data(skb, &c, 1);
+	}
+}
+
+static bool valid_packet_type(u8 type)
+{
+	switch (type) {
+	case HCI_ACLDATA_PKT:
+	case HCI_COMMAND_PKT:
+	case HCI_SCODATA_PKT:
+	case HCI_ISODATA_PKT:
+	case HCI_3WIRE_LINK_PKT:
+	case HCI_3WIRE_ACK_PKT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static struct sk_buff *h5_prepare_pkt(struct hci_uart *hu, u8 pkt_type,
+				      const u8 *data, size_t len)
+{
+	struct h5 *h5 = hu->priv;
+	struct sk_buff *nskb;
+	u8 hdr[4];
+	int i;
+
+	if (!valid_packet_type(pkt_type)) {
+		bt_dev_err(hu->hdev, "Unknown packet type %u", pkt_type);
+		return NULL;
+	}
+
+	/*
+	 * Max len of packet: (original len + 4 (H5 hdr) + 2 (crc)) * 2
+	 * (because bytes 0xc0 and 0xdb are escaped, worst case is when
+	 * the packet is all made of 0xc0 and 0xdb) + 2 (0xc0
+	 * delimiters at start and end).
+	 */
+	nskb = alloc_skb((len + 6) * 2 + 2, GFP_ATOMIC);
+	if (!nskb)
+		return NULL;
+
+	hci_skb_pkt_type(nskb) = pkt_type;
+
+	h5_slip_delim(nskb);
+
+	hdr[0] = h5->tx_ack << 3;
+	clear_bit(H5_TX_ACK_REQ, &h5->flags);
+
+	/* Reliable packet? */
+	if (pkt_type == HCI_ACLDATA_PKT || pkt_type == HCI_COMMAND_PKT) {
+		hdr[0] |= 1 << 7;
+		hdr[0] |= h5->tx_seq;
+		h5->tx_seq = (h5->tx_seq + 1) % 8;
+	}
+
+	hdr[1] = pkt_type | ((len & 0x0f) << 4);
+	hdr[2] = len >> 4;
+	hdr[3] = ~((hdr[0] + hdr[1] + hdr[2]) & 0xff);
+
+	BT_DBG("%s tx: seq %u ack %u crc %u rel %u type %u len %u",
+	       hu->hdev->name, H5_HDR_SEQ(hdr), H5_HDR_ACK(hdr),
+	       H5_HDR_CRC(hdr), H5_HDR_RELIABLE(hdr), H5_HDR_PKT_TYPE(hdr),
+	       H5_HDR_LEN(hdr));
+
+	for (i = 0; i < 4; i++)
+		h5_slip_one_byte(nskb, hdr[i]);
+
+	for (i = 0; i < len; i++)
+		h5_slip_one_byte(nskb, data[i]);
+
+	h5_slip_delim(nskb);
+
+	return nskb;
+}
+
+static struct sk_buff *h5_dequeue(struct hci_uart *hu)
+{
+	struct h5 *h5 = hu->priv;
+	unsigned long flags;
+	struct sk_buff *skb, *nskb;
+
+	if (h5->sleep != H5_AWAKE) {
+		const unsigned char wakeup_req[] = { 0x05, 0xfa };
+
+		if (h5->sleep == H5_WAKING_UP)
+			return NULL;
+
+		h5->sleep = H5_WAKING_UP;
+		BT_DBG("Sending wakeup request");
+
+		mod_timer(&h5->timer, jiffies + HZ / 100);
+		return h5_prepare_pkt(hu, HCI_3WIRE_LINK_PKT, wakeup_req, 2);
+	}
+
+	skb = skb_dequeue(&h5->unrel);
+	if (skb) {
+		nskb = h5_prepare_pkt(hu, hci_skb_pkt_type(skb),
+				      skb->data, skb->len);
+		if (nskb) {
+			kfree_skb(skb);
+			return nskb;
+		}
+
+		skb_queue_head(&h5->unrel, skb);
+		bt_dev_err(hu->hdev, "Could not dequeue pkt because alloc_skb failed");
+	}
+
+	spin_lock_irqsave_nested(&h5->unack.lock, flags, SINGLE_DEPTH_NESTING);
+
+	if (h5->unack.qlen >= h5->tx_win)
+		goto unlock;
+
+	skb = skb_dequeue(&h5->rel);
+	if (skb) {
+		nskb = h5_prepare_pkt(hu, hci_skb_pkt_type(skb),
+				      skb->data, skb->len);
+		if (nskb) {
+			__skb_queue_tail(&h5->unack, skb);
+			mod_timer(&h5->timer, jiffies + H5_ACK_TIMEOUT);
+			spin_unlock_irqrestore(&h5->unack.lock, flags);
+			return nskb;
+		}
+
+		skb_queue_head(&h5->rel, skb);
+		bt_dev_err(hu->hdev, "Could not dequeue pkt because alloc_skb failed");
+	}
+
+unlock:
+	spin_unlock_irqrestore(&h5->unack.lock, flags);
+
+	if (test_bit(H5_TX_ACK_REQ, &h5->flags))
+		return h5_prepare_pkt(hu, HCI_3WIRE_ACK_PKT, NULL, 0);
+
+	return NULL;
+}
+
+static int h5_flush(struct hci_uart *hu)
+{
+	BT_DBG("hu %p", hu);
+	return 0;
+}
+
+static const struct hci_uart_proto h5p = {
+	.id		= HCI_UART_3WIRE,
+	.name		= "Three-wire (H5)",
+	.open		= h5_open,
+	.close		= h5_close,
+	.setup		= h5_setup,
+	.recv		= h5_recv,
+	.enqueue	= h5_enqueue,
+	.dequeue	= h5_dequeue,
+	.flush		= h5_flush,
+};
+
+static int h5_serdev_probe(struct serdev_device *serdev)
+{
+	struct device *dev = &serdev->dev;
+	struct h5 *h5;
+	const struct h5_device_data *data;
+
+	h5 = devm_kzalloc(dev, sizeof(*h5), GFP_KERNEL);
+	if (!h5)
+		return -ENOMEM;
+
+	h5->hu = &h5->serdev_hu;
+	h5->serdev_hu.serdev = serdev;
+	serdev_device_set_drvdata(serdev, h5);
+
+	if (has_acpi_companion(dev)) {
+		const struct acpi_device_id *match;
+
+		match = acpi_match_device(dev->driver->acpi_match_table, dev);
+		if (!match)
+			return -ENODEV;
+
+		data = (const struct h5_device_data *)match->driver_data;
+		h5->vnd = data->vnd;
+		h5->id  = (char *)match->id;
+
+		if (h5->vnd->acpi_gpio_map)
+			devm_acpi_dev_add_driver_gpios(dev,
+						       h5->vnd->acpi_gpio_map);
+	} else {
+		data = of_device_get_match_data(dev);
+		if (!data)
+			return -ENODEV;
+
+		h5->vnd = data->vnd;
+	}
+
+	if (data->driver_info & H5_INFO_WAKEUP_DISABLE)
+		set_bit(H5_WAKEUP_DISABLE, &h5->flags);
+
+	h5->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(h5->enable_gpio))
+		return PTR_ERR(h5->enable_gpio);
+
+	h5->device_wake_gpio = devm_gpiod_get_optional(dev, "device-wake",
+						       GPIOD_OUT_LOW);
+	if (IS_ERR(h5->device_wake_gpio))
+		return PTR_ERR(h5->device_wake_gpio);
+
+	return hci_uart_register_device(&h5->serdev_hu, &h5p);
+}
+
+static void h5_serdev_remove(struct serdev_device *serdev)
+{
+	struct h5 *h5 = serdev_device_get_drvdata(serdev);
+
+	hci_uart_unregister_device(&h5->serdev_hu);
+}
+
+static int __maybe_unused h5_serdev_suspend(struct device *dev)
+{
+	struct h5 *h5 = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (h5->vnd && h5->vnd->suspend)
+		ret = h5->vnd->suspend(h5);
+
+	return ret;
+}
+
+static int __maybe_unused h5_serdev_resume(struct device *dev)
+{
+	struct h5 *h5 = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (h5->vnd && h5->vnd->resume)
+		ret = h5->vnd->resume(h5);
+
+	return ret;
+}
+
+#ifdef CONFIG_BT_HCIUART_RTL
+static int h5_btrtl_setup(struct h5 *h5)
+{
+	struct btrtl_device_info *btrtl_dev;
+	struct sk_buff *skb;
+	__le32 baudrate_data;
+	u32 device_baudrate;
+	unsigned int controller_baudrate;
+	bool flow_control;
+	int err;
+
+	btrtl_dev = btrtl_initialize(h5->hu->hdev, h5->id);
+	if (IS_ERR(btrtl_dev))
+		return PTR_ERR(btrtl_dev);
+
+	err = btrtl_get_uart_settings(h5->hu->hdev, btrtl_dev,
+				      &controller_baudrate, &device_baudrate,
+				      &flow_control);
+	if (err)
+		goto out_free;
+
+	baudrate_data = cpu_to_le32(device_baudrate);
+	skb = __hci_cmd_sync(h5->hu->hdev, 0xfc17, sizeof(baudrate_data),
+			     &baudrate_data, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		rtl_dev_err(h5->hu->hdev, "set baud rate command failed\n");
+		err = PTR_ERR(skb);
+		goto out_free;
+	} else {
+		kfree_skb(skb);
+	}
+	/* Give the device some time to set up the new baudrate. */
+	usleep_range(10000, 20000);
+
+	serdev_device_set_baudrate(h5->hu->serdev, controller_baudrate);
+	serdev_device_set_flow_control(h5->hu->serdev, flow_control);
+
+	if (flow_control)
+		set_bit(H5_HW_FLOW_CONTROL, &h5->flags);
+
+	err = btrtl_download_firmware(h5->hu->hdev, btrtl_dev);
+	/* Give the device some time before the hci-core sends it a reset */
+	usleep_range(10000, 20000);
+	if (err)
+		goto out_free;
+
+	btrtl_set_quirks(h5->hu->hdev, btrtl_dev);
+
+out_free:
+	btrtl_free(btrtl_dev);
+
+	return err;
+}
+
+static void h5_btrtl_open(struct h5 *h5)
+{
+	/*
+	 * Since h5_btrtl_resume() does a device_reprobe() the suspend handling
+	 * done by the hci_suspend_notifier is not necessary; it actually causes
+	 * delays and a bunch of errors to get logged, so disable it.
+	 */
+	if (test_bit(H5_WAKEUP_DISABLE, &h5->flags))
+		set_bit(HCI_UART_NO_SUSPEND_NOTIFIER, &h5->hu->flags);
+
+	/* Devices always start with these fixed parameters */
+	serdev_device_set_flow_control(h5->hu->serdev, false);
+	serdev_device_set_parity(h5->hu->serdev, SERDEV_PARITY_EVEN);
+	serdev_device_set_baudrate(h5->hu->serdev, 115200);
+
+	if (!test_bit(H5_WAKEUP_DISABLE, &h5->flags)) {
+		pm_runtime_set_active(&h5->hu->serdev->dev);
+		pm_runtime_use_autosuspend(&h5->hu->serdev->dev);
+		pm_runtime_set_autosuspend_delay(&h5->hu->serdev->dev,
+						 SUSPEND_TIMEOUT_MS);
+		pm_runtime_enable(&h5->hu->serdev->dev);
+	}
+
+	/* The controller needs reset to startup */
+	gpiod_set_value_cansleep(h5->enable_gpio, 0);
+	gpiod_set_value_cansleep(h5->device_wake_gpio, 0);
+	msleep(100);
+
+	/* The controller needs up to 500ms to wakeup */
+	gpiod_set_value_cansleep(h5->enable_gpio, 1);
+	gpiod_set_value_cansleep(h5->device_wake_gpio, 1);
+	msleep(500);
+}
+
+static void h5_btrtl_close(struct h5 *h5)
+{
+	if (!test_bit(H5_WAKEUP_DISABLE, &h5->flags))
+		pm_runtime_disable(&h5->hu->serdev->dev);
+
+	gpiod_set_value_cansleep(h5->device_wake_gpio, 0);
+	gpiod_set_value_cansleep(h5->enable_gpio, 0);
+}
+
+/* Suspend/resume support. On many devices the RTL BT device loses power during
+ * suspend/resume, causing it to lose its firmware and all state. So we simply
+ * turn it off on suspend and reprobe on resume. This mirrors how RTL devices
+ * are handled in the USB driver, where the BTUSB_WAKEUP_DISABLE is used which
+ * also causes a reprobe on resume.
+ */
+static int h5_btrtl_suspend(struct h5 *h5)
+{
+	serdev_device_set_flow_control(h5->hu->serdev, false);
+	gpiod_set_value_cansleep(h5->device_wake_gpio, 0);
+
+	if (test_bit(H5_WAKEUP_DISABLE, &h5->flags))
+		gpiod_set_value_cansleep(h5->enable_gpio, 0);
+
+	return 0;
+}
+
+struct h5_btrtl_reprobe {
+	struct device *dev;
+	struct work_struct work;
+};
+
+static void h5_btrtl_reprobe_worker(struct work_struct *work)
+{
+	struct h5_btrtl_reprobe *reprobe =
+		container_of(work, struct h5_btrtl_reprobe, work);
+	int ret;
+
+	ret = device_reprobe(reprobe->dev);
+	if (ret && ret != -EPROBE_DEFER)
+		dev_err(reprobe->dev, "Reprobe error %d\n", ret);
+
+	put_device(reprobe->dev);
+	kfree(reprobe);
+	module_put(THIS_MODULE);
+}
+
+static int h5_btrtl_resume(struct h5 *h5)
+{
+	if (test_bit(H5_WAKEUP_DISABLE, &h5->flags)) {
+		struct h5_btrtl_reprobe *reprobe;
+
+		reprobe = kzalloc(sizeof(*reprobe), GFP_KERNEL);
+		if (!reprobe)
+			return -ENOMEM;
+
+		__module_get(THIS_MODULE);
+
+		INIT_WORK(&reprobe->work, h5_btrtl_reprobe_worker);
+		reprobe->dev = get_device(&h5->hu->serdev->dev);
+		queue_work(system_long_wq, &reprobe->work);
+	} else {
+		gpiod_set_value_cansleep(h5->device_wake_gpio, 1);
+
+		if (test_bit(H5_HW_FLOW_CONTROL, &h5->flags))
+			serdev_device_set_flow_control(h5->hu->serdev, true);
+	}
+
+	return 0;
+}
+
+static const struct acpi_gpio_params btrtl_device_wake_gpios = { 0, 0, false };
+static const struct acpi_gpio_params btrtl_enable_gpios = { 1, 0, false };
+static const struct acpi_gpio_params btrtl_host_wake_gpios = { 2, 0, false };
+static const struct acpi_gpio_mapping acpi_btrtl_gpios[] = {
+	{ "device-wake-gpios", &btrtl_device_wake_gpios, 1 },
+	{ "enable-gpios", &btrtl_enable_gpios, 1 },
+	{ "host-wake-gpios", &btrtl_host_wake_gpios, 1 },
+	{},
+};
+
+static struct h5_vnd rtl_vnd = {
+	.setup		= h5_btrtl_setup,
+	.open		= h5_btrtl_open,
+	.close		= h5_btrtl_close,
+	.suspend	= h5_btrtl_suspend,
+	.resume		= h5_btrtl_resume,
+	.acpi_gpio_map	= acpi_btrtl_gpios,
+};
+
+static const struct h5_device_data h5_data_rtl8822cs = {
+	.vnd = &rtl_vnd,
+};
+
+static const struct h5_device_data h5_data_rtl8723bs = {
+	.driver_info = H5_INFO_WAKEUP_DISABLE,
+	.vnd = &rtl_vnd,
+};
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id h5_acpi_match[] = {
+#ifdef CONFIG_BT_HCIUART_RTL
+	{ "OBDA0623", (kernel_ulong_t)&h5_data_rtl8723bs },
+	{ "OBDA8723", (kernel_ulong_t)&h5_data_rtl8723bs },
+#endif
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, h5_acpi_match);
+#endif
+
+static const struct dev_pm_ops h5_serdev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(h5_serdev_suspend, h5_serdev_resume)
+	SET_RUNTIME_PM_OPS(h5_serdev_suspend, h5_serdev_resume, NULL)
+};
+
+static const struct of_device_id rtl_bluetooth_of_match[] = {
+#ifdef CONFIG_BT_HCIUART_RTL
+	{ .compatible = "realtek,rtl8822cs-bt",
+	  .data = (const void *)&h5_data_rtl8822cs },
+	{ .compatible = "realtek,rtl8723bs-bt",
+	  .data = (const void *)&h5_data_rtl8723bs },
+	{ .compatible = "realtek,rtl8723cs-bt",
+	  .data = (const void *)&h5_data_rtl8723bs },
+	{ .compatible = "realtek,rtl8723ds-bt",
+	  .data = (const void *)&h5_data_rtl8723bs },
+#endif
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rtl_bluetooth_of_match);
+
+static struct serdev_device_driver h5_serdev_driver = {
+	.probe = h5_serdev_probe,
+	.remove = h5_serdev_remove,
+	.driver = {
+		.name = "hci_uart_h5",
+		.acpi_match_table = ACPI_PTR(h5_acpi_match),
+		.pm = &h5_serdev_pm_ops,
+		.of_match_table = rtl_bluetooth_of_match,
+	},
+};
+
+int __init h5_init(void)
+{
+	serdev_device_driver_register(&h5_serdev_driver);
+	return hci_uart_register_proto(&h5p);
+}
+
+int __exit h5_deinit(void)
+{
+	serdev_device_driver_unregister(&h5_serdev_driver);
+	return hci_uart_unregister_proto(&h5p);
+}
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
new file mode 100644
index 000000000..78afb9a34
--- /dev/null
+++ b/drivers/bluetooth/hci_intel.c
@@ -0,0 +1,1234 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Bluetooth HCI UART driver for Intel devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/wait.h>
+#include <linux/tty.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+#include "btintel.h"
+
+#define STATE_BOOTLOADER	0
+#define STATE_DOWNLOADING	1
+#define STATE_FIRMWARE_LOADED	2
+#define STATE_FIRMWARE_FAILED	3
+#define STATE_BOOTING		4
+#define STATE_LPM_ENABLED	5
+#define STATE_TX_ACTIVE		6
+#define STATE_SUSPENDED		7
+#define STATE_LPM_TRANSACTION	8
+
+#define HCI_LPM_WAKE_PKT 0xf0
+#define HCI_LPM_PKT 0xf1
+#define HCI_LPM_MAX_SIZE 10
+#define HCI_LPM_HDR_SIZE HCI_EVENT_HDR_SIZE
+
+#define LPM_OP_TX_NOTIFY 0x00
+#define LPM_OP_SUSPEND_ACK 0x02
+#define LPM_OP_RESUME_ACK 0x03
+
+#define LPM_SUSPEND_DELAY_MS 1000
+
+struct hci_lpm_pkt {
+	__u8 opcode;
+	__u8 dlen;
+	__u8 data[];
+} __packed;
+
+struct intel_device {
+	struct list_head list;
+	struct platform_device *pdev;
+	struct gpio_desc *reset;
+	struct hci_uart *hu;
+	struct mutex hu_lock;
+	int irq;
+};
+
+static LIST_HEAD(intel_device_list);
+static DEFINE_MUTEX(intel_device_list_lock);
+
+struct intel_data {
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+	struct work_struct busy_work;
+	struct hci_uart *hu;
+	unsigned long flags;
+};
+
+static u8 intel_convert_speed(unsigned int speed)
+{
+	switch (speed) {
+	case 9600:
+		return 0x00;
+	case 19200:
+		return 0x01;
+	case 38400:
+		return 0x02;
+	case 57600:
+		return 0x03;
+	case 115200:
+		return 0x04;
+	case 230400:
+		return 0x05;
+	case 460800:
+		return 0x06;
+	case 921600:
+		return 0x07;
+	case 1843200:
+		return 0x08;
+	case 3250000:
+		return 0x09;
+	case 2000000:
+		return 0x0a;
+	case 3000000:
+		return 0x0b;
+	default:
+		return 0xff;
+	}
+}
+
+static int intel_wait_booting(struct hci_uart *hu)
+{
+	struct intel_data *intel = hu->priv;
+	int err;
+
+	err = wait_on_bit_timeout(&intel->flags, STATE_BOOTING,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(1000));
+
+	if (err == -EINTR) {
+		bt_dev_err(hu->hdev, "Device boot interrupted");
+		return -EINTR;
+	}
+
+	if (err) {
+		bt_dev_err(hu->hdev, "Device boot timeout");
+		return -ETIMEDOUT;
+	}
+
+	return err;
+}
+
+#ifdef CONFIG_PM
+static int intel_wait_lpm_transaction(struct hci_uart *hu)
+{
+	struct intel_data *intel = hu->priv;
+	int err;
+
+	err = wait_on_bit_timeout(&intel->flags, STATE_LPM_TRANSACTION,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(1000));
+
+	if (err == -EINTR) {
+		bt_dev_err(hu->hdev, "LPM transaction interrupted");
+		return -EINTR;
+	}
+
+	if (err) {
+		bt_dev_err(hu->hdev, "LPM transaction timeout");
+		return -ETIMEDOUT;
+	}
+
+	return err;
+}
+
+static int intel_lpm_suspend(struct hci_uart *hu)
+{
+	static const u8 suspend[] = { 0x01, 0x01, 0x01 };
+	struct intel_data *intel = hu->priv;
+	struct sk_buff *skb;
+
+	if (!test_bit(STATE_LPM_ENABLED, &intel->flags) ||
+	    test_bit(STATE_SUSPENDED, &intel->flags))
+		return 0;
+
+	if (test_bit(STATE_TX_ACTIVE, &intel->flags))
+		return -EAGAIN;
+
+	bt_dev_dbg(hu->hdev, "Suspending");
+
+	skb = bt_skb_alloc(sizeof(suspend), GFP_KERNEL);
+	if (!skb) {
+		bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
+		return -ENOMEM;
+	}
+
+	skb_put_data(skb, suspend, sizeof(suspend));
+	hci_skb_pkt_type(skb) = HCI_LPM_PKT;
+
+	set_bit(STATE_LPM_TRANSACTION, &intel->flags);
+
+	/* LPM flow is a priority, enqueue packet at list head */
+	skb_queue_head(&intel->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	intel_wait_lpm_transaction(hu);
+	/* Even in case of failure, continue and test the suspended flag */
+
+	clear_bit(STATE_LPM_TRANSACTION, &intel->flags);
+
+	if (!test_bit(STATE_SUSPENDED, &intel->flags)) {
+		bt_dev_err(hu->hdev, "Device suspend error");
+		return -EINVAL;
+	}
+
+	bt_dev_dbg(hu->hdev, "Suspended");
+
+	hci_uart_set_flow_control(hu, true);
+
+	return 0;
+}
+
+static int intel_lpm_resume(struct hci_uart *hu)
+{
+	struct intel_data *intel = hu->priv;
+	struct sk_buff *skb;
+
+	if (!test_bit(STATE_LPM_ENABLED, &intel->flags) ||
+	    !test_bit(STATE_SUSPENDED, &intel->flags))
+		return 0;
+
+	bt_dev_dbg(hu->hdev, "Resuming");
+
+	hci_uart_set_flow_control(hu, false);
+
+	skb = bt_skb_alloc(0, GFP_KERNEL);
+	if (!skb) {
+		bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
+		return -ENOMEM;
+	}
+
+	hci_skb_pkt_type(skb) = HCI_LPM_WAKE_PKT;
+
+	set_bit(STATE_LPM_TRANSACTION, &intel->flags);
+
+	/* LPM flow is a priority, enqueue packet at list head */
+	skb_queue_head(&intel->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	intel_wait_lpm_transaction(hu);
+	/* Even in case of failure, continue and test the suspended flag */
+
+	clear_bit(STATE_LPM_TRANSACTION, &intel->flags);
+
+	if (test_bit(STATE_SUSPENDED, &intel->flags)) {
+		bt_dev_err(hu->hdev, "Device resume error");
+		return -EINVAL;
+	}
+
+	bt_dev_dbg(hu->hdev, "Resumed");
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static int intel_lpm_host_wake(struct hci_uart *hu)
+{
+	static const u8 lpm_resume_ack[] = { LPM_OP_RESUME_ACK, 0x00 };
+	struct intel_data *intel = hu->priv;
+	struct sk_buff *skb;
+
+	hci_uart_set_flow_control(hu, false);
+
+	clear_bit(STATE_SUSPENDED, &intel->flags);
+
+	skb = bt_skb_alloc(sizeof(lpm_resume_ack), GFP_KERNEL);
+	if (!skb) {
+		bt_dev_err(hu->hdev, "Failed to alloc memory for LPM packet");
+		return -ENOMEM;
+	}
+
+	skb_put_data(skb, lpm_resume_ack, sizeof(lpm_resume_ack));
+	hci_skb_pkt_type(skb) = HCI_LPM_PKT;
+
+	/* LPM flow is a priority, enqueue packet at list head */
+	skb_queue_head(&intel->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	bt_dev_dbg(hu->hdev, "Resumed by controller");
+
+	return 0;
+}
+
+static irqreturn_t intel_irq(int irq, void *dev_id)
+{
+	struct intel_device *idev = dev_id;
+
+	dev_info(&idev->pdev->dev, "hci_intel irq\n");
+
+	mutex_lock(&idev->hu_lock);
+	if (idev->hu)
+		intel_lpm_host_wake(idev->hu);
+	mutex_unlock(&idev->hu_lock);
+
+	/* Host/Controller are now LPM resumed, trigger a new delayed suspend */
+	pm_runtime_get(&idev->pdev->dev);
+	pm_runtime_mark_last_busy(&idev->pdev->dev);
+	pm_runtime_put_autosuspend(&idev->pdev->dev);
+
+	return IRQ_HANDLED;
+}
+
+static int intel_set_power(struct hci_uart *hu, bool powered)
+{
+	struct intel_device *idev;
+	int err = -ENODEV;
+
+	if (!hu->tty->dev)
+		return err;
+
+	mutex_lock(&intel_device_list_lock);
+
+	list_for_each_entry(idev, &intel_device_list, list) {
+		/* tty device and pdev device should share the same parent
+		 * which is the UART port.
+		 */
+		if (hu->tty->dev->parent != idev->pdev->dev.parent)
+			continue;
+
+		if (!idev->reset) {
+			err = -ENOTSUPP;
+			break;
+		}
+
+		BT_INFO("hu %p, Switching compatible pm device (%s) to %u",
+			hu, dev_name(&idev->pdev->dev), powered);
+
+		gpiod_set_value(idev->reset, powered);
+
+		/* Provide to idev a hu reference which is used to run LPM
+		 * transactions (lpm suspend/resume) from PM callbacks.
+		 * hu needs to be protected against concurrent removing during
+		 * these PM ops.
+		 */
+		mutex_lock(&idev->hu_lock);
+		idev->hu = powered ? hu : NULL;
+		mutex_unlock(&idev->hu_lock);
+
+		if (idev->irq < 0)
+			break;
+
+		if (powered && device_can_wakeup(&idev->pdev->dev)) {
+			err = devm_request_threaded_irq(&idev->pdev->dev,
+							idev->irq, NULL,
+							intel_irq,
+							IRQF_ONESHOT,
+							"bt-host-wake", idev);
+			if (err) {
+				BT_ERR("hu %p, unable to allocate irq-%d",
+				       hu, idev->irq);
+				break;
+			}
+
+			device_wakeup_enable(&idev->pdev->dev);
+
+			pm_runtime_set_active(&idev->pdev->dev);
+			pm_runtime_use_autosuspend(&idev->pdev->dev);
+			pm_runtime_set_autosuspend_delay(&idev->pdev->dev,
+							 LPM_SUSPEND_DELAY_MS);
+			pm_runtime_enable(&idev->pdev->dev);
+		} else if (!powered && device_may_wakeup(&idev->pdev->dev)) {
+			devm_free_irq(&idev->pdev->dev, idev->irq, idev);
+			device_wakeup_disable(&idev->pdev->dev);
+
+			pm_runtime_disable(&idev->pdev->dev);
+		}
+	}
+
+	mutex_unlock(&intel_device_list_lock);
+
+	return err;
+}
+
+static void intel_busy_work(struct work_struct *work)
+{
+	struct intel_data *intel = container_of(work, struct intel_data,
+						busy_work);
+	struct intel_device *idev;
+
+	if (!intel->hu->tty->dev)
+		return;
+
+	/* Link is busy, delay the suspend */
+	mutex_lock(&intel_device_list_lock);
+	list_for_each_entry(idev, &intel_device_list, list) {
+		if (intel->hu->tty->dev->parent == idev->pdev->dev.parent) {
+			pm_runtime_get(&idev->pdev->dev);
+			pm_runtime_mark_last_busy(&idev->pdev->dev);
+			pm_runtime_put_autosuspend(&idev->pdev->dev);
+			break;
+		}
+	}
+	mutex_unlock(&intel_device_list_lock);
+}
+
+static int intel_open(struct hci_uart *hu)
+{
+	struct intel_data *intel;
+
+	BT_DBG("hu %p", hu);
+
+	if (!hci_uart_has_flow_control(hu))
+		return -EOPNOTSUPP;
+
+	intel = kzalloc(sizeof(*intel), GFP_KERNEL);
+	if (!intel)
+		return -ENOMEM;
+
+	skb_queue_head_init(&intel->txq);
+	INIT_WORK(&intel->busy_work, intel_busy_work);
+
+	intel->hu = hu;
+
+	hu->priv = intel;
+
+	if (!intel_set_power(hu, true))
+		set_bit(STATE_BOOTING, &intel->flags);
+
+	return 0;
+}
+
+static int intel_close(struct hci_uart *hu)
+{
+	struct intel_data *intel = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	cancel_work_sync(&intel->busy_work);
+
+	intel_set_power(hu, false);
+
+	skb_queue_purge(&intel->txq);
+	kfree_skb(intel->rx_skb);
+	kfree(intel);
+
+	hu->priv = NULL;
+	return 0;
+}
+
+static int intel_flush(struct hci_uart *hu)
+{
+	struct intel_data *intel = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&intel->txq);
+
+	return 0;
+}
+
+static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
+{
+	struct sk_buff *skb;
+	struct hci_event_hdr *hdr;
+	struct hci_ev_cmd_complete *evt;
+
+	skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	hdr = skb_put(skb, sizeof(*hdr));
+	hdr->evt = HCI_EV_CMD_COMPLETE;
+	hdr->plen = sizeof(*evt) + 1;
+
+	evt = skb_put(skb, sizeof(*evt));
+	evt->ncmd = 0x01;
+	evt->opcode = cpu_to_le16(opcode);
+
+	skb_put_u8(skb, 0x00);
+
+	hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
+
+	return hci_recv_frame(hdev, skb);
+}
+
+static int intel_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+	struct intel_data *intel = hu->priv;
+	struct hci_dev *hdev = hu->hdev;
+	u8 speed_cmd[] = { 0x06, 0xfc, 0x01, 0x00 };
+	struct sk_buff *skb;
+	int err;
+
+	/* This can be the first command sent to the chip, check
+	 * that the controller is ready.
+	 */
+	err = intel_wait_booting(hu);
+
+	clear_bit(STATE_BOOTING, &intel->flags);
+
+	/* In case of timeout, try to continue anyway */
+	if (err && err != -ETIMEDOUT)
+		return err;
+
+	bt_dev_info(hdev, "Change controller speed to %d", speed);
+
+	speed_cmd[3] = intel_convert_speed(speed);
+	if (speed_cmd[3] == 0xff) {
+		bt_dev_err(hdev, "Unsupported speed");
+		return -EINVAL;
+	}
+
+	/* Device will not accept speed change if Intel version has not been
+	 * previously requested.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	skb = bt_skb_alloc(sizeof(speed_cmd), GFP_KERNEL);
+	if (!skb) {
+		bt_dev_err(hdev, "Failed to alloc memory for baudrate packet");
+		return -ENOMEM;
+	}
+
+	skb_put_data(skb, speed_cmd, sizeof(speed_cmd));
+	hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
+
+	hci_uart_set_flow_control(hu, true);
+
+	skb_queue_tail(&intel->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	/* wait 100ms to change baudrate on controller side */
+	msleep(100);
+
+	hci_uart_set_baudrate(hu, speed);
+	hci_uart_set_flow_control(hu, false);
+
+	return 0;
+}
+
+static int intel_setup(struct hci_uart *hu)
+{
+	struct intel_data *intel = hu->priv;
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+	struct intel_version ver;
+	struct intel_boot_params params;
+	struct intel_device *idev;
+	const struct firmware *fw;
+	char fwname[64];
+	u32 boot_param;
+	ktime_t calltime, delta, rettime;
+	unsigned long long duration;
+	unsigned int init_speed, oper_speed;
+	int speed_change = 0;
+	int err;
+
+	bt_dev_dbg(hdev, "start intel_setup");
+
+	hu->hdev->set_diag = btintel_set_diag;
+	hu->hdev->set_bdaddr = btintel_set_bdaddr;
+
+	/* Set the default boot parameter to 0x0 and it is updated to
+	 * SKU specific boot parameter after reading Intel_Write_Boot_Params
+	 * command while downloading the firmware.
+	 */
+	boot_param = 0x00000000;
+
+	calltime = ktime_get();
+
+	if (hu->init_speed)
+		init_speed = hu->init_speed;
+	else
+		init_speed = hu->proto->init_speed;
+
+	if (hu->oper_speed)
+		oper_speed = hu->oper_speed;
+	else
+		oper_speed = hu->proto->oper_speed;
+
+	if (oper_speed && init_speed && oper_speed != init_speed)
+		speed_change = 1;
+
+	/* Check that the controller is ready */
+	err = intel_wait_booting(hu);
+
+	clear_bit(STATE_BOOTING, &intel->flags);
+
+	/* In case of timeout, try to continue anyway */
+	if (err && err != -ETIMEDOUT)
+		return err;
+
+	set_bit(STATE_BOOTLOADER, &intel->flags);
+
+	/* Read the Intel version information to determine if the device
+	 * is in bootloader mode or if it already has operational firmware
+	 * loaded.
+	 */
+	err = btintel_read_version(hdev, &ver);
+	if (err)
+		return err;
+
+	/* The hardware platform number has a fixed value of 0x37 and
+	 * for now only accept this single value.
+	 */
+	if (ver.hw_platform != 0x37) {
+		bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
+			   ver.hw_platform);
+		return -EINVAL;
+	}
+
+        /* Check for supported iBT hardware variants of this firmware
+         * loading method.
+         *
+         * This check has been put in place to ensure correct forward
+         * compatibility options when newer hardware variants come along.
+         */
+	switch (ver.hw_variant) {
+	case 0x0b:	/* LnP */
+	case 0x0c:	/* WsP */
+	case 0x12:	/* ThP */
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
+			   ver.hw_variant);
+		return -EINVAL;
+	}
+
+	btintel_version_info(hdev, &ver);
+
+	/* The firmware variant determines if the device is in bootloader
+	 * mode or is running operational firmware. The value 0x06 identifies
+	 * the bootloader and the value 0x23 identifies the operational
+	 * firmware.
+	 *
+	 * When the operational firmware is already present, then only
+	 * the check for valid Bluetooth device address is needed. This
+	 * determines if the device will be added as configured or
+	 * unconfigured controller.
+	 *
+	 * It is not possible to use the Secure Boot Parameters in this
+	 * case since that command is only available in bootloader mode.
+	 */
+	if (ver.fw_variant == 0x23) {
+		clear_bit(STATE_BOOTLOADER, &intel->flags);
+		btintel_check_bdaddr(hdev);
+		return 0;
+	}
+
+	/* If the device is not in bootloader mode, then the only possible
+	 * choice is to return an error and abort the device initialization.
+	 */
+	if (ver.fw_variant != 0x06) {
+		bt_dev_err(hdev, "Unsupported Intel firmware variant (%u)",
+			   ver.fw_variant);
+		return -ENODEV;
+	}
+
+	/* Read the secure boot parameters to identify the operating
+	 * details of the bootloader.
+	 */
+	err = btintel_read_boot_params(hdev, &params);
+	if (err)
+		return err;
+
+	/* It is required that every single firmware fragment is acknowledged
+	 * with a command complete event. If the boot parameters indicate
+	 * that this bootloader does not send them, then abort the setup.
+	 */
+	if (params.limited_cce != 0x00) {
+		bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
+			   params.limited_cce);
+		return -EINVAL;
+	}
+
+	/* If the OTP has no valid Bluetooth device address, then there will
+	 * also be no valid address for the operational firmware.
+	 */
+	if (!bacmp(&params.otp_bdaddr, BDADDR_ANY)) {
+		bt_dev_info(hdev, "No device address configured");
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	}
+
+	/* With this Intel bootloader only the hardware variant and device
+	 * revision information are used to select the right firmware for SfP
+	 * and WsP.
+	 *
+	 * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
+	 *
+	 * Currently the supported hardware variants are:
+	 *   11 (0x0b) for iBT 3.0 (LnP/SfP)
+	 *   12 (0x0c) for iBT 3.5 (WsP)
+	 *
+	 * For ThP/JfP and for future SKU's, the FW name varies based on HW
+	 * variant, HW revision and FW revision, as these are dependent on CNVi
+	 * and RF Combination.
+	 *
+	 *   18 (0x12) for iBT3.5 (ThP/JfP)
+	 *
+	 * The firmware file name for these will be
+	 * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi.
+	 *
+	 */
+	switch (ver.hw_variant) {
+	case 0x0b:      /* SfP */
+	case 0x0c:      /* WsP */
+		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.sfi",
+			 ver.hw_variant, le16_to_cpu(params.dev_revid));
+		break;
+	case 0x12:      /* ThP */
+		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u-%u.sfi",
+			 ver.hw_variant, ver.hw_revision, ver.fw_revision);
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
+			   ver.hw_variant);
+		return -EINVAL;
+	}
+
+	err = request_firmware(&fw, fwname, &hdev->dev);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to load Intel firmware file (%d)",
+			   err);
+		return err;
+	}
+
+	bt_dev_info(hdev, "Found device firmware: %s", fwname);
+
+	/* Save the DDC file name for later */
+	switch (ver.hw_variant) {
+	case 0x0b:      /* SfP */
+	case 0x0c:      /* WsP */
+		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u.ddc",
+			 ver.hw_variant, le16_to_cpu(params.dev_revid));
+		break;
+	case 0x12:      /* ThP */
+		snprintf(fwname, sizeof(fwname), "intel/ibt-%u-%u-%u.ddc",
+			 ver.hw_variant, ver.hw_revision, ver.fw_revision);
+		break;
+	default:
+		bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
+			   ver.hw_variant);
+		return -EINVAL;
+	}
+
+	if (fw->size < 644) {
+		bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
+			   fw->size);
+		err = -EBADF;
+		goto done;
+	}
+
+	set_bit(STATE_DOWNLOADING, &intel->flags);
+
+	/* Start firmware downloading and get boot parameter */
+	err = btintel_download_firmware(hdev, &ver, fw, &boot_param);
+	if (err < 0)
+		goto done;
+
+	set_bit(STATE_FIRMWARE_LOADED, &intel->flags);
+
+	bt_dev_info(hdev, "Waiting for firmware download to complete");
+
+	/* Before switching the device into operational mode and with that
+	 * booting the loaded firmware, wait for the bootloader notification
+	 * that all fragments have been successfully received.
+	 *
+	 * When the event processing receives the notification, then the
+	 * STATE_DOWNLOADING flag will be cleared.
+	 *
+	 * The firmware loading should not take longer than 5 seconds
+	 * and thus just timeout if that happens and fail the setup
+	 * of this device.
+	 */
+	err = wait_on_bit_timeout(&intel->flags, STATE_DOWNLOADING,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(5000));
+	if (err == -EINTR) {
+		bt_dev_err(hdev, "Firmware loading interrupted");
+		err = -EINTR;
+		goto done;
+	}
+
+	if (err) {
+		bt_dev_err(hdev, "Firmware loading timeout");
+		err = -ETIMEDOUT;
+		goto done;
+	}
+
+	if (test_bit(STATE_FIRMWARE_FAILED, &intel->flags)) {
+		bt_dev_err(hdev, "Firmware loading failed");
+		err = -ENOEXEC;
+		goto done;
+	}
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
+
+done:
+	release_firmware(fw);
+
+	/* Check if there was an error and if is not -EALREADY which means the
+	 * firmware has already been loaded.
+	 */
+	if (err < 0 && err != -EALREADY)
+		return err;
+
+	/* We need to restore the default speed before Intel reset */
+	if (speed_change) {
+		err = intel_set_baudrate(hu, init_speed);
+		if (err)
+			return err;
+	}
+
+	calltime = ktime_get();
+
+	set_bit(STATE_BOOTING, &intel->flags);
+
+	err = btintel_send_intel_reset(hdev, boot_param);
+	if (err)
+		return err;
+
+	/* The bootloader will not indicate when the device is ready. This
+	 * is done by the operational firmware sending bootup notification.
+	 *
+	 * Booting into operational firmware should not take longer than
+	 * 1 second. However if that happens, then just fail the setup
+	 * since something went wrong.
+	 */
+	bt_dev_info(hdev, "Waiting for device to boot");
+
+	err = intel_wait_booting(hu);
+	if (err)
+		return err;
+
+	clear_bit(STATE_BOOTING, &intel->flags);
+
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+	bt_dev_info(hdev, "Device booted in %llu usecs", duration);
+
+	/* Enable LPM if matching pdev with wakeup enabled, set TX active
+	 * until further LPM TX notification.
+	 */
+	mutex_lock(&intel_device_list_lock);
+	list_for_each_entry(idev, &intel_device_list, list) {
+		if (!hu->tty->dev)
+			break;
+		if (hu->tty->dev->parent == idev->pdev->dev.parent) {
+			if (device_may_wakeup(&idev->pdev->dev)) {
+				set_bit(STATE_LPM_ENABLED, &intel->flags);
+				set_bit(STATE_TX_ACTIVE, &intel->flags);
+			}
+			break;
+		}
+	}
+	mutex_unlock(&intel_device_list_lock);
+
+	/* Ignore errors, device can work without DDC parameters */
+	btintel_load_ddc_config(hdev, fwname);
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+	kfree_skb(skb);
+
+	if (speed_change) {
+		err = intel_set_baudrate(hu, oper_speed);
+		if (err)
+			return err;
+	}
+
+	bt_dev_info(hdev, "Setup complete");
+
+	clear_bit(STATE_BOOTLOADER, &intel->flags);
+
+	return 0;
+}
+
+static int intel_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct intel_data *intel = hu->priv;
+	struct hci_event_hdr *hdr;
+
+	if (!test_bit(STATE_BOOTLOADER, &intel->flags) &&
+	    !test_bit(STATE_BOOTING, &intel->flags))
+		goto recv;
+
+	hdr = (void *)skb->data;
+
+	/* When the firmware loading completes the device sends
+	 * out a vendor specific event indicating the result of
+	 * the firmware loading.
+	 */
+	if (skb->len == 7 && hdr->evt == 0xff && hdr->plen == 0x05 &&
+	    skb->data[2] == 0x06) {
+		if (skb->data[3] != 0x00)
+			set_bit(STATE_FIRMWARE_FAILED, &intel->flags);
+
+		if (test_and_clear_bit(STATE_DOWNLOADING, &intel->flags) &&
+		    test_bit(STATE_FIRMWARE_LOADED, &intel->flags))
+			wake_up_bit(&intel->flags, STATE_DOWNLOADING);
+
+	/* When switching to the operational firmware the device
+	 * sends a vendor specific event indicating that the bootup
+	 * completed.
+	 */
+	} else if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 &&
+		   skb->data[2] == 0x02) {
+		if (test_and_clear_bit(STATE_BOOTING, &intel->flags))
+			wake_up_bit(&intel->flags, STATE_BOOTING);
+	}
+recv:
+	return hci_recv_frame(hdev, skb);
+}
+
+static void intel_recv_lpm_notify(struct hci_dev *hdev, int value)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct intel_data *intel = hu->priv;
+
+	bt_dev_dbg(hdev, "TX idle notification (%d)", value);
+
+	if (value) {
+		set_bit(STATE_TX_ACTIVE, &intel->flags);
+		schedule_work(&intel->busy_work);
+	} else {
+		clear_bit(STATE_TX_ACTIVE, &intel->flags);
+	}
+}
+
+static int intel_recv_lpm(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_lpm_pkt *lpm = (void *)skb->data;
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct intel_data *intel = hu->priv;
+
+	switch (lpm->opcode) {
+	case LPM_OP_TX_NOTIFY:
+		if (lpm->dlen < 1) {
+			bt_dev_err(hu->hdev, "Invalid LPM notification packet");
+			break;
+		}
+		intel_recv_lpm_notify(hdev, lpm->data[0]);
+		break;
+	case LPM_OP_SUSPEND_ACK:
+		set_bit(STATE_SUSPENDED, &intel->flags);
+		if (test_and_clear_bit(STATE_LPM_TRANSACTION, &intel->flags))
+			wake_up_bit(&intel->flags, STATE_LPM_TRANSACTION);
+		break;
+	case LPM_OP_RESUME_ACK:
+		clear_bit(STATE_SUSPENDED, &intel->flags);
+		if (test_and_clear_bit(STATE_LPM_TRANSACTION, &intel->flags))
+			wake_up_bit(&intel->flags, STATE_LPM_TRANSACTION);
+		break;
+	default:
+		bt_dev_err(hdev, "Unknown LPM opcode (%02x)", lpm->opcode);
+		break;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
+#define INTEL_RECV_LPM \
+	.type = HCI_LPM_PKT, \
+	.hlen = HCI_LPM_HDR_SIZE, \
+	.loff = 1, \
+	.lsize = 1, \
+	.maxlen = HCI_LPM_MAX_SIZE
+
+static const struct h4_recv_pkt intel_recv_pkts[] = {
+	{ H4_RECV_ACL,    .recv = hci_recv_frame   },
+	{ H4_RECV_SCO,    .recv = hci_recv_frame   },
+	{ H4_RECV_EVENT,  .recv = intel_recv_event },
+	{ INTEL_RECV_LPM, .recv = intel_recv_lpm   },
+};
+
+static int intel_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct intel_data *intel = hu->priv;
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	intel->rx_skb = h4_recv_buf(hu->hdev, intel->rx_skb, data, count,
+				    intel_recv_pkts,
+				    ARRAY_SIZE(intel_recv_pkts));
+	if (IS_ERR(intel->rx_skb)) {
+		int err = PTR_ERR(intel->rx_skb);
+		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+		intel->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
+static int intel_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct intel_data *intel = hu->priv;
+	struct intel_device *idev;
+
+	BT_DBG("hu %p skb %p", hu, skb);
+
+	if (!hu->tty->dev)
+		goto out_enqueue;
+
+	/* Be sure our controller is resumed and potential LPM transaction
+	 * completed before enqueuing any packet.
+	 */
+	mutex_lock(&intel_device_list_lock);
+	list_for_each_entry(idev, &intel_device_list, list) {
+		if (hu->tty->dev->parent == idev->pdev->dev.parent) {
+			pm_runtime_get_sync(&idev->pdev->dev);
+			pm_runtime_mark_last_busy(&idev->pdev->dev);
+			pm_runtime_put_autosuspend(&idev->pdev->dev);
+			break;
+		}
+	}
+	mutex_unlock(&intel_device_list_lock);
+out_enqueue:
+	skb_queue_tail(&intel->txq, skb);
+
+	return 0;
+}
+
+static struct sk_buff *intel_dequeue(struct hci_uart *hu)
+{
+	struct intel_data *intel = hu->priv;
+	struct sk_buff *skb;
+
+	skb = skb_dequeue(&intel->txq);
+	if (!skb)
+		return skb;
+
+	if (test_bit(STATE_BOOTLOADER, &intel->flags) &&
+	    (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT)) {
+		struct hci_command_hdr *cmd = (void *)skb->data;
+		__u16 opcode = le16_to_cpu(cmd->opcode);
+
+		/* When the 0xfc01 command is issued to boot into
+		 * the operational firmware, it will actually not
+		 * send a command complete event. To keep the flow
+		 * control working inject that event here.
+		 */
+		if (opcode == 0xfc01)
+			inject_cmd_complete(hu->hdev, opcode);
+	}
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+
+	return skb;
+}
+
+static const struct hci_uart_proto intel_proto = {
+	.id		= HCI_UART_INTEL,
+	.name		= "Intel",
+	.manufacturer	= 2,
+	.init_speed	= 115200,
+	.oper_speed	= 3000000,
+	.open		= intel_open,
+	.close		= intel_close,
+	.flush		= intel_flush,
+	.setup		= intel_setup,
+	.set_baudrate	= intel_set_baudrate,
+	.recv		= intel_recv,
+	.enqueue	= intel_enqueue,
+	.dequeue	= intel_dequeue,
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id intel_acpi_match[] = {
+	{ "INT33E1", 0 },
+	{ "INT33E3", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, intel_acpi_match);
+#endif
+
+#ifdef CONFIG_PM
+static int intel_suspend_device(struct device *dev)
+{
+	struct intel_device *idev = dev_get_drvdata(dev);
+
+	mutex_lock(&idev->hu_lock);
+	if (idev->hu)
+		intel_lpm_suspend(idev->hu);
+	mutex_unlock(&idev->hu_lock);
+
+	return 0;
+}
+
+static int intel_resume_device(struct device *dev)
+{
+	struct intel_device *idev = dev_get_drvdata(dev);
+
+	mutex_lock(&idev->hu_lock);
+	if (idev->hu)
+		intel_lpm_resume(idev->hu);
+	mutex_unlock(&idev->hu_lock);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int intel_suspend(struct device *dev)
+{
+	struct intel_device *idev = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(idev->irq);
+
+	return intel_suspend_device(dev);
+}
+
+static int intel_resume(struct device *dev)
+{
+	struct intel_device *idev = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(idev->irq);
+
+	return intel_resume_device(dev);
+}
+#endif
+
+static const struct dev_pm_ops intel_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(intel_suspend, intel_resume)
+	SET_RUNTIME_PM_OPS(intel_suspend_device, intel_resume_device, NULL)
+};
+
+static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
+static const struct acpi_gpio_params host_wake_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_hci_intel_gpios[] = {
+	{ "reset-gpios", &reset_gpios, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO },
+	{ "host-wake-gpios", &host_wake_gpios, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO },
+	{ }
+};
+
+static int intel_probe(struct platform_device *pdev)
+{
+	struct intel_device *idev;
+	int ret;
+
+	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
+	if (!idev)
+		return -ENOMEM;
+
+	mutex_init(&idev->hu_lock);
+
+	idev->pdev = pdev;
+
+	ret = devm_acpi_dev_add_driver_gpios(&pdev->dev, acpi_hci_intel_gpios);
+	if (ret)
+		dev_dbg(&pdev->dev, "Unable to add GPIO mapping table\n");
+
+	idev->reset = devm_gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(idev->reset)) {
+		dev_err(&pdev->dev, "Unable to retrieve gpio\n");
+		return PTR_ERR(idev->reset);
+	}
+
+	idev->irq = platform_get_irq(pdev, 0);
+	if (idev->irq < 0) {
+		struct gpio_desc *host_wake;
+
+		dev_err(&pdev->dev, "No IRQ, falling back to gpio-irq\n");
+
+		host_wake = devm_gpiod_get(&pdev->dev, "host-wake", GPIOD_IN);
+		if (IS_ERR(host_wake)) {
+			dev_err(&pdev->dev, "Unable to retrieve IRQ\n");
+			goto no_irq;
+		}
+
+		idev->irq = gpiod_to_irq(host_wake);
+		if (idev->irq < 0) {
+			dev_err(&pdev->dev, "No corresponding irq for gpio\n");
+			goto no_irq;
+		}
+	}
+
+	/* Only enable wake-up/irq when controller is powered */
+	device_set_wakeup_capable(&pdev->dev, true);
+	device_wakeup_disable(&pdev->dev);
+
+no_irq:
+	platform_set_drvdata(pdev, idev);
+
+	/* Place this instance on the device list */
+	mutex_lock(&intel_device_list_lock);
+	list_add_tail(&idev->list, &intel_device_list);
+	mutex_unlock(&intel_device_list_lock);
+
+	dev_info(&pdev->dev, "registered, gpio(%d)/irq(%d).\n",
+		 desc_to_gpio(idev->reset), idev->irq);
+
+	return 0;
+}
+
+static int intel_remove(struct platform_device *pdev)
+{
+	struct intel_device *idev = platform_get_drvdata(pdev);
+
+	device_wakeup_disable(&pdev->dev);
+
+	mutex_lock(&intel_device_list_lock);
+	list_del(&idev->list);
+	mutex_unlock(&intel_device_list_lock);
+
+	dev_info(&pdev->dev, "unregistered.\n");
+
+	return 0;
+}
+
+static struct platform_driver intel_driver = {
+	.probe = intel_probe,
+	.remove = intel_remove,
+	.driver = {
+		.name = "hci_intel",
+		.acpi_match_table = ACPI_PTR(intel_acpi_match),
+		.pm = &intel_pm_ops,
+	},
+};
+
+int __init intel_init(void)
+{
+	int err;
+
+	err = platform_driver_register(&intel_driver);
+	if (err)
+		return err;
+
+	return hci_uart_register_proto(&intel_proto);
+}
+
+int __exit intel_deinit(void)
+{
+	platform_driver_unregister(&intel_driver);
+
+	return hci_uart_unregister_proto(&intel_proto);
+}
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
new file mode 100644
index 000000000..865112e96
--- /dev/null
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -0,0 +1,932 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Bluetooth HCI UART driver
+ *
+ *  Copyright (C) 2000-2001  Qualcomm Incorporated
+ *  Copyright (C) 2002-2003  Maxim Krasnyansky <maxk@qualcomm.com>
+ *  Copyright (C) 2004-2005  Marcel Holtmann <marcel@holtmann.org>
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/poll.h>
+
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/ioctl.h>
+#include <linux/skbuff.h>
+#include <linux/firmware.h>
+#include <linux/serdev.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btintel.h"
+#include "btbcm.h"
+#include "hci_uart.h"
+
+#define VERSION "2.3"
+
+static const struct hci_uart_proto *hup[HCI_UART_MAX_PROTO];
+
+int hci_uart_register_proto(const struct hci_uart_proto *p)
+{
+	if (p->id >= HCI_UART_MAX_PROTO)
+		return -EINVAL;
+
+	if (hup[p->id])
+		return -EEXIST;
+
+	hup[p->id] = p;
+
+	BT_INFO("HCI UART protocol %s registered", p->name);
+
+	return 0;
+}
+
+int hci_uart_unregister_proto(const struct hci_uart_proto *p)
+{
+	if (p->id >= HCI_UART_MAX_PROTO)
+		return -EINVAL;
+
+	if (!hup[p->id])
+		return -EINVAL;
+
+	hup[p->id] = NULL;
+
+	return 0;
+}
+
+static const struct hci_uart_proto *hci_uart_get_proto(unsigned int id)
+{
+	if (id >= HCI_UART_MAX_PROTO)
+		return NULL;
+
+	return hup[id];
+}
+
+static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type)
+{
+	struct hci_dev *hdev = hu->hdev;
+
+	/* Update HCI stat counters */
+	switch (pkt_type) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+	}
+}
+
+static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
+{
+	struct sk_buff *skb = hu->tx_skb;
+
+	if (!skb) {
+		percpu_down_read(&hu->proto_lock);
+
+		if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+			skb = hu->proto->dequeue(hu);
+
+		percpu_up_read(&hu->proto_lock);
+	} else {
+		hu->tx_skb = NULL;
+	}
+
+	return skb;
+}
+
+int hci_uart_tx_wakeup(struct hci_uart *hu)
+{
+	/* This may be called in an IRQ context, so we can't sleep. Therefore
+	 * we try to acquire the lock only, and if that fails we assume the
+	 * tty is being closed because that is the only time the write lock is
+	 * acquired. If, however, at some point in the future the write lock
+	 * is also acquired in other situations, then this must be revisited.
+	 */
+	if (!percpu_down_read_trylock(&hu->proto_lock))
+		return 0;
+
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		goto no_schedule;
+
+	set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
+	if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state))
+		goto no_schedule;
+
+	BT_DBG("");
+
+	schedule_work(&hu->write_work);
+
+no_schedule:
+	percpu_up_read(&hu->proto_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(hci_uart_tx_wakeup);
+
+static void hci_uart_write_work(struct work_struct *work)
+{
+	struct hci_uart *hu = container_of(work, struct hci_uart, write_work);
+	struct tty_struct *tty = hu->tty;
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+
+	/* REVISIT: should we cope with bad skbs or ->write() returning
+	 * and error value ?
+	 */
+
+restart:
+	clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
+
+	while ((skb = hci_uart_dequeue(hu))) {
+		int len;
+
+		set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+		len = tty->ops->write(tty, skb->data, skb->len);
+		hdev->stat.byte_tx += len;
+
+		skb_pull(skb, len);
+		if (skb->len) {
+			hu->tx_skb = skb;
+			break;
+		}
+
+		hci_uart_tx_complete(hu, hci_skb_pkt_type(skb));
+		kfree_skb(skb);
+	}
+
+	clear_bit(HCI_UART_SENDING, &hu->tx_state);
+	if (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state))
+		goto restart;
+
+	wake_up_bit(&hu->tx_state, HCI_UART_SENDING);
+}
+
+void hci_uart_init_work(struct work_struct *work)
+{
+	struct hci_uart *hu = container_of(work, struct hci_uart, init_ready);
+	int err;
+	struct hci_dev *hdev;
+
+	if (!test_and_clear_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags))
+		return;
+
+	err = hci_register_dev(hu->hdev);
+	if (err < 0) {
+		BT_ERR("Can't register HCI device");
+		clear_bit(HCI_UART_PROTO_READY, &hu->flags);
+		hu->proto->close(hu);
+		hdev = hu->hdev;
+		hu->hdev = NULL;
+		hci_free_dev(hdev);
+		return;
+	}
+
+	set_bit(HCI_UART_REGISTERED, &hu->flags);
+}
+
+int hci_uart_init_ready(struct hci_uart *hu)
+{
+	if (!test_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags))
+		return -EALREADY;
+
+	schedule_work(&hu->init_ready);
+
+	return 0;
+}
+
+int hci_uart_wait_until_sent(struct hci_uart *hu)
+{
+	return wait_on_bit_timeout(&hu->tx_state, HCI_UART_SENDING,
+				   TASK_INTERRUPTIBLE,
+				   msecs_to_jiffies(2000));
+}
+
+/* ------- Interface to HCI layer ------ */
+/* Reset device */
+static int hci_uart_flush(struct hci_dev *hdev)
+{
+	struct hci_uart *hu  = hci_get_drvdata(hdev);
+	struct tty_struct *tty = hu->tty;
+
+	BT_DBG("hdev %p tty %p", hdev, tty);
+
+	if (hu->tx_skb) {
+		kfree_skb(hu->tx_skb); hu->tx_skb = NULL;
+	}
+
+	/* Flush any pending characters in the driver and discipline. */
+	tty_ldisc_flush(tty);
+	tty_driver_flush_buffer(tty);
+
+	percpu_down_read(&hu->proto_lock);
+
+	if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		hu->proto->flush(hu);
+
+	percpu_up_read(&hu->proto_lock);
+
+	return 0;
+}
+
+/* Initialize device */
+static int hci_uart_open(struct hci_dev *hdev)
+{
+	BT_DBG("%s %p", hdev->name, hdev);
+
+	/* Undo clearing this from hci_uart_close() */
+	hdev->flush = hci_uart_flush;
+
+	return 0;
+}
+
+/* Close device */
+static int hci_uart_close(struct hci_dev *hdev)
+{
+	BT_DBG("hdev %p", hdev);
+
+	hci_uart_flush(hdev);
+	hdev->flush = NULL;
+	return 0;
+}
+
+/* Send frames from HCI layer */
+static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+
+	BT_DBG("%s: type %d len %d", hdev->name, hci_skb_pkt_type(skb),
+	       skb->len);
+
+	percpu_down_read(&hu->proto_lock);
+
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
+		percpu_up_read(&hu->proto_lock);
+		return -EUNATCH;
+	}
+
+	hu->proto->enqueue(hu, skb);
+	percpu_up_read(&hu->proto_lock);
+
+	hci_uart_tx_wakeup(hu);
+
+	return 0;
+}
+
+/* Check the underlying device or tty has flow control support */
+bool hci_uart_has_flow_control(struct hci_uart *hu)
+{
+	/* serdev nodes check if the needed operations are present */
+	if (hu->serdev)
+		return true;
+
+	if (hu->tty->driver->ops->tiocmget && hu->tty->driver->ops->tiocmset)
+		return true;
+
+	return false;
+}
+
+/* Flow control or un-flow control the device */
+void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
+{
+	struct tty_struct *tty = hu->tty;
+	struct ktermios ktermios;
+	int status;
+	unsigned int set = 0;
+	unsigned int clear = 0;
+
+	if (hu->serdev) {
+		serdev_device_set_flow_control(hu->serdev, !enable);
+		serdev_device_set_rts(hu->serdev, !enable);
+		return;
+	}
+
+	if (enable) {
+		/* Disable hardware flow control */
+		ktermios = tty->termios;
+		ktermios.c_cflag &= ~CRTSCTS;
+		status = tty_set_termios(tty, &ktermios);
+		BT_DBG("Disabling hardware flow control: %s",
+		       status ? "failed" : "success");
+
+		/* Clear RTS to prevent the device from sending */
+		/* Most UARTs need OUT2 to enable interrupts */
+		status = tty->driver->ops->tiocmget(tty);
+		BT_DBG("Current tiocm 0x%x", status);
+
+		set &= ~(TIOCM_OUT2 | TIOCM_RTS);
+		clear = ~set;
+		set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+		       TIOCM_OUT2 | TIOCM_LOOP;
+		clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+			 TIOCM_OUT2 | TIOCM_LOOP;
+		status = tty->driver->ops->tiocmset(tty, set, clear);
+		BT_DBG("Clearing RTS: %s", status ? "failed" : "success");
+	} else {
+		/* Set RTS to allow the device to send again */
+		status = tty->driver->ops->tiocmget(tty);
+		BT_DBG("Current tiocm 0x%x", status);
+
+		set |= (TIOCM_OUT2 | TIOCM_RTS);
+		clear = ~set;
+		set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+		       TIOCM_OUT2 | TIOCM_LOOP;
+		clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+			 TIOCM_OUT2 | TIOCM_LOOP;
+		status = tty->driver->ops->tiocmset(tty, set, clear);
+		BT_DBG("Setting RTS: %s", status ? "failed" : "success");
+
+		/* Re-enable hardware flow control */
+		ktermios = tty->termios;
+		ktermios.c_cflag |= CRTSCTS;
+		status = tty_set_termios(tty, &ktermios);
+		BT_DBG("Enabling hardware flow control: %s",
+		       status ? "failed" : "success");
+	}
+}
+
+void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
+			 unsigned int oper_speed)
+{
+	hu->init_speed = init_speed;
+	hu->oper_speed = oper_speed;
+}
+
+void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+	struct tty_struct *tty = hu->tty;
+	struct ktermios ktermios;
+
+	ktermios = tty->termios;
+	ktermios.c_cflag &= ~CBAUD;
+	tty_termios_encode_baud_rate(&ktermios, speed, speed);
+
+	/* tty_set_termios() return not checked as it is always 0 */
+	tty_set_termios(tty, &ktermios);
+
+	BT_DBG("%s: New tty speeds: %d/%d", hu->hdev->name,
+	       tty->termios.c_ispeed, tty->termios.c_ospeed);
+}
+
+static int hci_uart_setup(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct hci_rp_read_local_version *ver;
+	struct sk_buff *skb;
+	unsigned int speed;
+	int err;
+
+	/* Init speed if any */
+	if (hu->init_speed)
+		speed = hu->init_speed;
+	else if (hu->proto->init_speed)
+		speed = hu->proto->init_speed;
+	else
+		speed = 0;
+
+	if (speed)
+		hci_uart_set_baudrate(hu, speed);
+
+	/* Operational speed if any */
+	if (hu->oper_speed)
+		speed = hu->oper_speed;
+	else if (hu->proto->oper_speed)
+		speed = hu->proto->oper_speed;
+	else
+		speed = 0;
+
+	if (hu->proto->set_baudrate && speed) {
+		err = hu->proto->set_baudrate(hu, speed);
+		if (!err)
+			hci_uart_set_baudrate(hu, speed);
+	}
+
+	if (hu->proto->setup)
+		return hu->proto->setup(hu);
+
+	if (!test_bit(HCI_UART_VND_DETECT, &hu->hdev_flags))
+		return 0;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: Reading local version information failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return 0;
+	}
+
+	if (skb->len != sizeof(*ver)) {
+		BT_ERR("%s: Event length mismatch for version information",
+		       hdev->name);
+		goto done;
+	}
+
+	ver = (struct hci_rp_read_local_version *)skb->data;
+
+	switch (le16_to_cpu(ver->manufacturer)) {
+#ifdef CONFIG_BT_HCIUART_INTEL
+	case 2:
+		hdev->set_bdaddr = btintel_set_bdaddr;
+		btintel_check_bdaddr(hdev);
+		break;
+#endif
+#ifdef CONFIG_BT_HCIUART_BCM
+	case 15:
+		hdev->set_bdaddr = btbcm_set_bdaddr;
+		btbcm_check_bdaddr(hdev);
+		break;
+#endif
+	default:
+		break;
+	}
+
+done:
+	kfree_skb(skb);
+	return 0;
+}
+
+/* ------ LDISC part ------ */
+/* hci_uart_tty_open
+ *
+ *     Called when line discipline changed to HCI_UART.
+ *
+ * Arguments:
+ *     tty    pointer to tty info structure
+ * Return Value:
+ *     0 if success, otherwise error code
+ */
+static int hci_uart_tty_open(struct tty_struct *tty)
+{
+	struct hci_uart *hu;
+
+	BT_DBG("tty %p", tty);
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	/* Error if the tty has no write op instead of leaving an exploitable
+	 * hole
+	 */
+	if (tty->ops->write == NULL)
+		return -EOPNOTSUPP;
+
+	hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL);
+	if (!hu) {
+		BT_ERR("Can't allocate control structure");
+		return -ENFILE;
+	}
+	if (percpu_init_rwsem(&hu->proto_lock)) {
+		BT_ERR("Can't allocate semaphore structure");
+		kfree(hu);
+		return -ENOMEM;
+	}
+
+	tty->disc_data = hu;
+	hu->tty = tty;
+	tty->receive_room = 65536;
+
+	/* disable alignment support by default */
+	hu->alignment = 1;
+	hu->padding = 0;
+
+	INIT_WORK(&hu->init_ready, hci_uart_init_work);
+	INIT_WORK(&hu->write_work, hci_uart_write_work);
+
+	/* Flush any pending characters in the driver */
+	tty_driver_flush_buffer(tty);
+
+	return 0;
+}
+
+/* hci_uart_tty_close()
+ *
+ *    Called when the line discipline is changed to something
+ *    else, the tty is closed, or the tty detects a hangup.
+ */
+static void hci_uart_tty_close(struct tty_struct *tty)
+{
+	struct hci_uart *hu = tty->disc_data;
+	struct hci_dev *hdev;
+
+	BT_DBG("tty %p", tty);
+
+	/* Detach from the tty */
+	tty->disc_data = NULL;
+
+	if (!hu)
+		return;
+
+	hdev = hu->hdev;
+	if (hdev)
+		hci_uart_close(hdev);
+
+	if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
+		percpu_down_write(&hu->proto_lock);
+		clear_bit(HCI_UART_PROTO_READY, &hu->flags);
+		percpu_up_write(&hu->proto_lock);
+
+		cancel_work_sync(&hu->init_ready);
+		cancel_work_sync(&hu->write_work);
+
+		if (hdev) {
+			if (test_bit(HCI_UART_REGISTERED, &hu->flags))
+				hci_unregister_dev(hdev);
+			hci_free_dev(hdev);
+		}
+		hu->proto->close(hu);
+	}
+	clear_bit(HCI_UART_PROTO_SET, &hu->flags);
+
+	percpu_free_rwsem(&hu->proto_lock);
+
+	kfree(hu);
+}
+
+/* hci_uart_tty_wakeup()
+ *
+ *    Callback for transmit wakeup. Called when low level
+ *    device driver can accept more send data.
+ *
+ * Arguments:        tty    pointer to associated tty instance data
+ * Return Value:    None
+ */
+static void hci_uart_tty_wakeup(struct tty_struct *tty)
+{
+	struct hci_uart *hu = tty->disc_data;
+
+	BT_DBG("");
+
+	if (!hu)
+		return;
+
+	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+
+	if (tty != hu->tty)
+		return;
+
+	if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		hci_uart_tx_wakeup(hu);
+}
+
+/* hci_uart_tty_receive()
+ *
+ *     Called by tty low level driver when receive data is
+ *     available.
+ *
+ * Arguments:  tty          pointer to tty isntance data
+ *             data         pointer to received data
+ *             flags        pointer to flags for data
+ *             count        count of received data in bytes
+ *
+ * Return Value:    None
+ */
+static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data,
+				 const char *flags, int count)
+{
+	struct hci_uart *hu = tty->disc_data;
+
+	if (!hu || tty != hu->tty)
+		return;
+
+	percpu_down_read(&hu->proto_lock);
+
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
+		percpu_up_read(&hu->proto_lock);
+		return;
+	}
+
+	/* It does not need a lock here as it is already protected by a mutex in
+	 * tty caller
+	 */
+	hu->proto->recv(hu, data, count);
+	percpu_up_read(&hu->proto_lock);
+
+	if (hu->hdev)
+		hu->hdev->stat.byte_rx += count;
+
+	tty_unthrottle(tty);
+}
+
+static int hci_uart_register_dev(struct hci_uart *hu)
+{
+	struct hci_dev *hdev;
+	int err;
+
+	BT_DBG("");
+
+	/* Initialize and register HCI device */
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Can't allocate HCI device");
+		return -ENOMEM;
+	}
+
+	hu->hdev = hdev;
+
+	hdev->bus = HCI_UART;
+	hci_set_drvdata(hdev, hu);
+
+	/* Only when vendor specific setup callback is provided, consider
+	 * the manufacturer information valid. This avoids filling in the
+	 * value for Ericsson when nothing is specified.
+	 */
+	if (hu->proto->setup)
+		hdev->manufacturer = hu->proto->manufacturer;
+
+	hdev->open  = hci_uart_open;
+	hdev->close = hci_uart_close;
+	hdev->flush = hci_uart_flush;
+	hdev->send  = hci_uart_send_frame;
+	hdev->setup = hci_uart_setup;
+	SET_HCIDEV_DEV(hdev, hu->tty->dev);
+
+	if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags))
+		set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+
+	if (test_bit(HCI_UART_EXT_CONFIG, &hu->hdev_flags))
+		set_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks);
+
+	if (!test_bit(HCI_UART_RESET_ON_INIT, &hu->hdev_flags))
+		set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
+	if (test_bit(HCI_UART_CREATE_AMP, &hu->hdev_flags))
+		hdev->dev_type = HCI_AMP;
+	else
+		hdev->dev_type = HCI_PRIMARY;
+
+	/* Only call open() for the protocol after hdev is fully initialized as
+	 * open() (or a timer/workqueue it starts) may attempt to reference it.
+	 */
+	err = hu->proto->open(hu);
+	if (err) {
+		hu->hdev = NULL;
+		hci_free_dev(hdev);
+		return err;
+	}
+
+	if (test_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags))
+		return 0;
+
+	if (hci_register_dev(hdev) < 0) {
+		BT_ERR("Can't register HCI device");
+		hu->proto->close(hu);
+		hu->hdev = NULL;
+		hci_free_dev(hdev);
+		return -ENODEV;
+	}
+
+	set_bit(HCI_UART_REGISTERED, &hu->flags);
+
+	return 0;
+}
+
+static int hci_uart_set_proto(struct hci_uart *hu, int id)
+{
+	const struct hci_uart_proto *p;
+	int err;
+
+	p = hci_uart_get_proto(id);
+	if (!p)
+		return -EPROTONOSUPPORT;
+
+	hu->proto = p;
+
+	err = hci_uart_register_dev(hu);
+	if (err) {
+		return err;
+	}
+
+	set_bit(HCI_UART_PROTO_READY, &hu->flags);
+	return 0;
+}
+
+static int hci_uart_set_flags(struct hci_uart *hu, unsigned long flags)
+{
+	unsigned long valid_flags = BIT(HCI_UART_RAW_DEVICE) |
+				    BIT(HCI_UART_RESET_ON_INIT) |
+				    BIT(HCI_UART_CREATE_AMP) |
+				    BIT(HCI_UART_INIT_PENDING) |
+				    BIT(HCI_UART_EXT_CONFIG) |
+				    BIT(HCI_UART_VND_DETECT);
+
+	if (flags & ~valid_flags)
+		return -EINVAL;
+
+	hu->hdev_flags = flags;
+
+	return 0;
+}
+
+/* hci_uart_tty_ioctl()
+ *
+ *    Process IOCTL system call for the tty device.
+ *
+ * Arguments:
+ *
+ *    tty        pointer to tty instance data
+ *    cmd        IOCTL command code
+ *    arg        argument for IOCTL call (cmd dependent)
+ *
+ * Return Value:    Command dependent
+ */
+static int hci_uart_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
+			      unsigned long arg)
+{
+	struct hci_uart *hu = tty->disc_data;
+	int err = 0;
+
+	BT_DBG("");
+
+	/* Verify the status of the device */
+	if (!hu)
+		return -EBADF;
+
+	switch (cmd) {
+	case HCIUARTSETPROTO:
+		if (!test_and_set_bit(HCI_UART_PROTO_SET, &hu->flags)) {
+			err = hci_uart_set_proto(hu, arg);
+			if (err)
+				clear_bit(HCI_UART_PROTO_SET, &hu->flags);
+		} else
+			err = -EBUSY;
+		break;
+
+	case HCIUARTGETPROTO:
+		if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
+			err = hu->proto->id;
+		else
+			err = -EUNATCH;
+		break;
+
+	case HCIUARTGETDEVICE:
+		if (test_bit(HCI_UART_REGISTERED, &hu->flags))
+			err = hu->hdev->id;
+		else
+			err = -EUNATCH;
+		break;
+
+	case HCIUARTSETFLAGS:
+		if (test_bit(HCI_UART_PROTO_SET, &hu->flags))
+			err = -EBUSY;
+		else
+			err = hci_uart_set_flags(hu, arg);
+		break;
+
+	case HCIUARTGETFLAGS:
+		err = hu->hdev_flags;
+		break;
+
+	default:
+		err = n_tty_ioctl_helper(tty, cmd, arg);
+		break;
+	}
+
+	return err;
+}
+
+/*
+ * We don't provide read/write/poll interface for user space.
+ */
+static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file,
+				 unsigned char *buf, size_t nr,
+				 void **cookie, unsigned long offset)
+{
+	return 0;
+}
+
+static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file,
+				  const unsigned char *data, size_t count)
+{
+	return 0;
+}
+
+static __poll_t hci_uart_tty_poll(struct tty_struct *tty,
+				      struct file *filp, poll_table *wait)
+{
+	return 0;
+}
+
+static struct tty_ldisc_ops hci_uart_ldisc = {
+	.owner		= THIS_MODULE,
+	.num		= N_HCI,
+	.name		= "n_hci",
+	.open		= hci_uart_tty_open,
+	.close		= hci_uart_tty_close,
+	.read		= hci_uart_tty_read,
+	.write		= hci_uart_tty_write,
+	.ioctl		= hci_uart_tty_ioctl,
+	.compat_ioctl	= hci_uart_tty_ioctl,
+	.poll		= hci_uart_tty_poll,
+	.receive_buf	= hci_uart_tty_receive,
+	.write_wakeup	= hci_uart_tty_wakeup,
+};
+
+static int __init hci_uart_init(void)
+{
+	int err;
+
+	BT_INFO("HCI UART driver ver %s", VERSION);
+
+	/* Register the tty discipline */
+	err = tty_register_ldisc(&hci_uart_ldisc);
+	if (err) {
+		BT_ERR("HCI line discipline registration failed. (%d)", err);
+		return err;
+	}
+
+#ifdef CONFIG_BT_HCIUART_H4
+	h4_init();
+#endif
+#ifdef CONFIG_BT_HCIUART_BCSP
+	bcsp_init();
+#endif
+#ifdef CONFIG_BT_HCIUART_LL
+	ll_init();
+#endif
+#ifdef CONFIG_BT_HCIUART_ATH3K
+	ath_init();
+#endif
+#ifdef CONFIG_BT_HCIUART_3WIRE
+	h5_init();
+#endif
+#ifdef CONFIG_BT_HCIUART_INTEL
+	intel_init();
+#endif
+#ifdef CONFIG_BT_HCIUART_BCM
+	bcm_init();
+#endif
+#ifdef CONFIG_BT_HCIUART_QCA
+	qca_init();
+#endif
+#ifdef CONFIG_BT_HCIUART_AG6XX
+	ag6xx_init();
+#endif
+#ifdef CONFIG_BT_HCIUART_MRVL
+	mrvl_init();
+#endif
+
+	return 0;
+}
+
+static void __exit hci_uart_exit(void)
+{
+#ifdef CONFIG_BT_HCIUART_H4
+	h4_deinit();
+#endif
+#ifdef CONFIG_BT_HCIUART_BCSP
+	bcsp_deinit();
+#endif
+#ifdef CONFIG_BT_HCIUART_LL
+	ll_deinit();
+#endif
+#ifdef CONFIG_BT_HCIUART_ATH3K
+	ath_deinit();
+#endif
+#ifdef CONFIG_BT_HCIUART_3WIRE
+	h5_deinit();
+#endif
+#ifdef CONFIG_BT_HCIUART_INTEL
+	intel_deinit();
+#endif
+#ifdef CONFIG_BT_HCIUART_BCM
+	bcm_deinit();
+#endif
+#ifdef CONFIG_BT_HCIUART_QCA
+	qca_deinit();
+#endif
+#ifdef CONFIG_BT_HCIUART_AG6XX
+	ag6xx_deinit();
+#endif
+#ifdef CONFIG_BT_HCIUART_MRVL
+	mrvl_deinit();
+#endif
+
+	tty_unregister_ldisc(&hci_uart_ldisc);
+}
+
+module_init(hci_uart_init);
+module_exit(hci_uart_exit);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Bluetooth HCI UART driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_LDISC(N_HCI);
diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c
new file mode 100644
index 000000000..5abc01a2a
--- /dev/null
+++ b/drivers/bluetooth/hci_ll.c
@@ -0,0 +1,822 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Texas Instruments' Bluetooth HCILL UART protocol
+ *
+ *  HCILL (HCI Low Level) is a Texas Instruments' power management
+ *  protocol extension to H4.
+ *
+ *  Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ *  Written by Ohad Ben-Cohen <ohad@bencohen.org>
+ *
+ *  Acknowledgements:
+ *  This file is based on hci_h4.c, which was written
+ *  by Maxim Krasnyansky and Marcel Holtmann.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/firmware.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/poll.h>
+
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/signal.h>
+#include <linux/ioctl.h>
+#include <linux/of.h>
+#include <linux/serdev.h>
+#include <linux/skbuff.h>
+#include <linux/ti_wilink_st.h>
+#include <linux/clk.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+#include <linux/gpio/consumer.h>
+#include <linux/nvmem-consumer.h>
+
+#include "hci_uart.h"
+
+/* Vendor-specific HCI commands */
+#define HCI_VS_WRITE_BD_ADDR			0xfc06
+#define HCI_VS_UPDATE_UART_HCI_BAUDRATE		0xff36
+
+/* HCILL commands */
+#define HCILL_GO_TO_SLEEP_IND	0x30
+#define HCILL_GO_TO_SLEEP_ACK	0x31
+#define HCILL_WAKE_UP_IND	0x32
+#define HCILL_WAKE_UP_ACK	0x33
+
+/* HCILL states */
+enum hcill_states_e {
+	HCILL_ASLEEP,
+	HCILL_ASLEEP_TO_AWAKE,
+	HCILL_AWAKE,
+	HCILL_AWAKE_TO_ASLEEP
+};
+
+struct ll_device {
+	struct hci_uart hu;
+	struct serdev_device *serdev;
+	struct gpio_desc *enable_gpio;
+	struct clk *ext_clk;
+	bdaddr_t bdaddr;
+};
+
+struct ll_struct {
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+	spinlock_t hcill_lock;		/* HCILL state lock	*/
+	unsigned long hcill_state;	/* HCILL power state	*/
+	struct sk_buff_head tx_wait_q;	/* HCILL wait queue	*/
+};
+
+/*
+ * Builds and sends an HCILL command packet.
+ * These are very simple packets with only 1 cmd byte
+ */
+static int send_hcill_cmd(u8 cmd, struct hci_uart *hu)
+{
+	int err = 0;
+	struct sk_buff *skb = NULL;
+	struct ll_struct *ll = hu->priv;
+
+	BT_DBG("hu %p cmd 0x%x", hu, cmd);
+
+	/* allocate packet */
+	skb = bt_skb_alloc(1, GFP_ATOMIC);
+	if (!skb) {
+		BT_ERR("cannot allocate memory for HCILL packet");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	/* prepare packet */
+	skb_put_u8(skb, cmd);
+
+	/* send packet */
+	skb_queue_tail(&ll->txq, skb);
+out:
+	return err;
+}
+
+/* Initialize protocol */
+static int ll_open(struct hci_uart *hu)
+{
+	struct ll_struct *ll;
+
+	BT_DBG("hu %p", hu);
+
+	ll = kzalloc(sizeof(*ll), GFP_KERNEL);
+	if (!ll)
+		return -ENOMEM;
+
+	skb_queue_head_init(&ll->txq);
+	skb_queue_head_init(&ll->tx_wait_q);
+	spin_lock_init(&ll->hcill_lock);
+
+	ll->hcill_state = HCILL_AWAKE;
+
+	hu->priv = ll;
+
+	if (hu->serdev) {
+		struct ll_device *lldev = serdev_device_get_drvdata(hu->serdev);
+
+		if (!IS_ERR(lldev->ext_clk))
+			clk_prepare_enable(lldev->ext_clk);
+	}
+
+	return 0;
+}
+
+/* Flush protocol data */
+static int ll_flush(struct hci_uart *hu)
+{
+	struct ll_struct *ll = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&ll->tx_wait_q);
+	skb_queue_purge(&ll->txq);
+
+	return 0;
+}
+
+/* Close protocol */
+static int ll_close(struct hci_uart *hu)
+{
+	struct ll_struct *ll = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&ll->tx_wait_q);
+	skb_queue_purge(&ll->txq);
+
+	kfree_skb(ll->rx_skb);
+
+	if (hu->serdev) {
+		struct ll_device *lldev = serdev_device_get_drvdata(hu->serdev);
+
+		gpiod_set_value_cansleep(lldev->enable_gpio, 0);
+
+		clk_disable_unprepare(lldev->ext_clk);
+	}
+
+	hu->priv = NULL;
+
+	kfree(ll);
+
+	return 0;
+}
+
+/*
+ * internal function, which does common work of the device wake up process:
+ * 1. places all pending packets (waiting in tx_wait_q list) in txq list.
+ * 2. changes internal state to HCILL_AWAKE.
+ * Note: assumes that hcill_lock spinlock is taken,
+ * shouldn't be called otherwise!
+ */
+static void __ll_do_awake(struct ll_struct *ll)
+{
+	struct sk_buff *skb = NULL;
+
+	while ((skb = skb_dequeue(&ll->tx_wait_q)))
+		skb_queue_tail(&ll->txq, skb);
+
+	ll->hcill_state = HCILL_AWAKE;
+}
+
+/*
+ * Called upon a wake-up-indication from the device
+ */
+static void ll_device_want_to_wakeup(struct hci_uart *hu)
+{
+	unsigned long flags;
+	struct ll_struct *ll = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	/* lock hcill state */
+	spin_lock_irqsave(&ll->hcill_lock, flags);
+
+	switch (ll->hcill_state) {
+	case HCILL_ASLEEP_TO_AWAKE:
+		/*
+		 * This state means that both the host and the BRF chip
+		 * have simultaneously sent a wake-up-indication packet.
+		 * Traditionally, in this case, receiving a wake-up-indication
+		 * was enough and an additional wake-up-ack wasn't needed.
+		 * This has changed with the BRF6350, which does require an
+		 * explicit wake-up-ack. Other BRF versions, which do not
+		 * require an explicit ack here, do accept it, thus it is
+		 * perfectly safe to always send one.
+		 */
+		BT_DBG("dual wake-up-indication");
+		fallthrough;
+	case HCILL_ASLEEP:
+		/* acknowledge device wake up */
+		if (send_hcill_cmd(HCILL_WAKE_UP_ACK, hu) < 0) {
+			BT_ERR("cannot acknowledge device wake up");
+			goto out;
+		}
+		break;
+	default:
+		/* any other state is illegal */
+		BT_ERR("received HCILL_WAKE_UP_IND in state %ld",
+		       ll->hcill_state);
+		break;
+	}
+
+	/* send pending packets and change state to HCILL_AWAKE */
+	__ll_do_awake(ll);
+
+out:
+	spin_unlock_irqrestore(&ll->hcill_lock, flags);
+
+	/* actually send the packets */
+	hci_uart_tx_wakeup(hu);
+}
+
+/*
+ * Called upon a sleep-indication from the device
+ */
+static void ll_device_want_to_sleep(struct hci_uart *hu)
+{
+	unsigned long flags;
+	struct ll_struct *ll = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	/* lock hcill state */
+	spin_lock_irqsave(&ll->hcill_lock, flags);
+
+	/* sanity check */
+	if (ll->hcill_state != HCILL_AWAKE)
+		BT_ERR("ERR: HCILL_GO_TO_SLEEP_IND in state %ld",
+		       ll->hcill_state);
+
+	/* acknowledge device sleep */
+	if (send_hcill_cmd(HCILL_GO_TO_SLEEP_ACK, hu) < 0) {
+		BT_ERR("cannot acknowledge device sleep");
+		goto out;
+	}
+
+	/* update state */
+	ll->hcill_state = HCILL_ASLEEP;
+
+out:
+	spin_unlock_irqrestore(&ll->hcill_lock, flags);
+
+	/* actually send the sleep ack packet */
+	hci_uart_tx_wakeup(hu);
+}
+
+/*
+ * Called upon wake-up-acknowledgement from the device
+ */
+static void ll_device_woke_up(struct hci_uart *hu)
+{
+	unsigned long flags;
+	struct ll_struct *ll = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	/* lock hcill state */
+	spin_lock_irqsave(&ll->hcill_lock, flags);
+
+	/* sanity check */
+	if (ll->hcill_state != HCILL_ASLEEP_TO_AWAKE)
+		BT_ERR("received HCILL_WAKE_UP_ACK in state %ld",
+		       ll->hcill_state);
+
+	/* send pending packets and change state to HCILL_AWAKE */
+	__ll_do_awake(ll);
+
+	spin_unlock_irqrestore(&ll->hcill_lock, flags);
+
+	/* actually send the packets */
+	hci_uart_tx_wakeup(hu);
+}
+
+/* Enqueue frame for transmittion (padding, crc, etc) */
+/* may be called from two simultaneous tasklets */
+static int ll_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	unsigned long flags = 0;
+	struct ll_struct *ll = hu->priv;
+
+	BT_DBG("hu %p skb %p", hu, skb);
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+
+	/* lock hcill state */
+	spin_lock_irqsave(&ll->hcill_lock, flags);
+
+	/* act according to current state */
+	switch (ll->hcill_state) {
+	case HCILL_AWAKE:
+		BT_DBG("device awake, sending normally");
+		skb_queue_tail(&ll->txq, skb);
+		break;
+	case HCILL_ASLEEP:
+		BT_DBG("device asleep, waking up and queueing packet");
+		/* save packet for later */
+		skb_queue_tail(&ll->tx_wait_q, skb);
+		/* awake device */
+		if (send_hcill_cmd(HCILL_WAKE_UP_IND, hu) < 0) {
+			BT_ERR("cannot wake up device");
+			break;
+		}
+		ll->hcill_state = HCILL_ASLEEP_TO_AWAKE;
+		break;
+	case HCILL_ASLEEP_TO_AWAKE:
+		BT_DBG("device waking up, queueing packet");
+		/* transient state; just keep packet for later */
+		skb_queue_tail(&ll->tx_wait_q, skb);
+		break;
+	default:
+		BT_ERR("illegal hcill state: %ld (losing packet)",
+		       ll->hcill_state);
+		dev_kfree_skb_irq(skb);
+		break;
+	}
+
+	spin_unlock_irqrestore(&ll->hcill_lock, flags);
+
+	return 0;
+}
+
+static int ll_recv_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct ll_struct *ll = hu->priv;
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCILL_GO_TO_SLEEP_IND:
+		BT_DBG("HCILL_GO_TO_SLEEP_IND packet");
+		ll_device_want_to_sleep(hu);
+		break;
+	case HCILL_GO_TO_SLEEP_ACK:
+		/* shouldn't happen */
+		bt_dev_err(hdev, "received HCILL_GO_TO_SLEEP_ACK in state %ld",
+			   ll->hcill_state);
+		break;
+	case HCILL_WAKE_UP_IND:
+		BT_DBG("HCILL_WAKE_UP_IND packet");
+		ll_device_want_to_wakeup(hu);
+		break;
+	case HCILL_WAKE_UP_ACK:
+		BT_DBG("HCILL_WAKE_UP_ACK packet");
+		ll_device_woke_up(hu);
+		break;
+	}
+
+	kfree_skb(skb);
+	return 0;
+}
+
+#define LL_RECV_SLEEP_IND \
+	.type = HCILL_GO_TO_SLEEP_IND, \
+	.hlen = 0, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = 0
+
+#define LL_RECV_SLEEP_ACK \
+	.type = HCILL_GO_TO_SLEEP_ACK, \
+	.hlen = 0, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = 0
+
+#define LL_RECV_WAKE_IND \
+	.type = HCILL_WAKE_UP_IND, \
+	.hlen = 0, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = 0
+
+#define LL_RECV_WAKE_ACK \
+	.type = HCILL_WAKE_UP_ACK, \
+	.hlen = 0, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = 0
+
+static const struct h4_recv_pkt ll_recv_pkts[] = {
+	{ H4_RECV_ACL,       .recv = hci_recv_frame },
+	{ H4_RECV_SCO,       .recv = hci_recv_frame },
+	{ H4_RECV_EVENT,     .recv = hci_recv_frame },
+	{ LL_RECV_SLEEP_IND, .recv = ll_recv_frame  },
+	{ LL_RECV_SLEEP_ACK, .recv = ll_recv_frame  },
+	{ LL_RECV_WAKE_IND,  .recv = ll_recv_frame  },
+	{ LL_RECV_WAKE_ACK,  .recv = ll_recv_frame  },
+};
+
+/* Recv data */
+static int ll_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct ll_struct *ll = hu->priv;
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	ll->rx_skb = h4_recv_buf(hu->hdev, ll->rx_skb, data, count,
+				 ll_recv_pkts, ARRAY_SIZE(ll_recv_pkts));
+	if (IS_ERR(ll->rx_skb)) {
+		int err = PTR_ERR(ll->rx_skb);
+		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+		ll->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
+static struct sk_buff *ll_dequeue(struct hci_uart *hu)
+{
+	struct ll_struct *ll = hu->priv;
+
+	return skb_dequeue(&ll->txq);
+}
+
+#if IS_ENABLED(CONFIG_SERIAL_DEV_BUS)
+static int read_local_version(struct hci_dev *hdev)
+{
+	int err = 0;
+	unsigned short version = 0;
+	struct sk_buff *skb;
+	struct hci_rp_read_local_version *ver;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading TI version information failed (%ld)",
+			   PTR_ERR(skb));
+		return PTR_ERR(skb);
+	}
+	if (skb->len != sizeof(*ver)) {
+		err = -EILSEQ;
+		goto out;
+	}
+
+	ver = (struct hci_rp_read_local_version *)skb->data;
+	if (le16_to_cpu(ver->manufacturer) != 13) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	version = le16_to_cpu(ver->lmp_subver);
+
+out:
+	if (err)
+		bt_dev_err(hdev, "Failed to read TI version info: %d", err);
+	kfree_skb(skb);
+	return err ? err : version;
+}
+
+static int send_command_from_firmware(struct ll_device *lldev,
+				      struct hci_command *cmd)
+{
+	struct sk_buff *skb;
+
+	if (cmd->opcode == HCI_VS_UPDATE_UART_HCI_BAUDRATE) {
+		/* ignore remote change
+		 * baud rate HCI VS command
+		 */
+		bt_dev_warn(lldev->hu.hdev,
+			    "change remote baud rate command in firmware");
+		return 0;
+	}
+	if (cmd->prefix != 1)
+		bt_dev_dbg(lldev->hu.hdev, "command type %d", cmd->prefix);
+
+	skb = __hci_cmd_sync(lldev->hu.hdev, cmd->opcode, cmd->plen,
+			     &cmd->speed, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(lldev->hu.hdev, "send command failed");
+		return PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+	return 0;
+}
+
+/*
+ * download_firmware -
+ *	internal function which parses through the .bts firmware
+ *	script file intreprets SEND, DELAY actions only as of now
+ */
+static int download_firmware(struct ll_device *lldev)
+{
+	unsigned short chip, min_ver, maj_ver;
+	int version, err, len;
+	unsigned char *ptr, *action_ptr;
+	unsigned char bts_scr_name[40];	/* 40 char long bts scr name? */
+	const struct firmware *fw;
+	struct hci_command *cmd;
+
+	version = read_local_version(lldev->hu.hdev);
+	if (version < 0)
+		return version;
+
+	chip = (version & 0x7C00) >> 10;
+	min_ver = (version & 0x007F);
+	maj_ver = (version & 0x0380) >> 7;
+	if (version & 0x8000)
+		maj_ver |= 0x0008;
+
+	snprintf(bts_scr_name, sizeof(bts_scr_name),
+		 "ti-connectivity/TIInit_%d.%d.%d.bts",
+		 chip, maj_ver, min_ver);
+
+	err = request_firmware(&fw, bts_scr_name, &lldev->serdev->dev);
+	if (err || !fw->data || !fw->size) {
+		bt_dev_err(lldev->hu.hdev, "request_firmware failed(errno %d) for %s",
+			   err, bts_scr_name);
+		return -EINVAL;
+	}
+	ptr = (void *)fw->data;
+	len = fw->size;
+	/* bts_header to remove out magic number and
+	 * version
+	 */
+	ptr += sizeof(struct bts_header);
+	len -= sizeof(struct bts_header);
+
+	while (len > 0 && ptr) {
+		bt_dev_dbg(lldev->hu.hdev, " action size %d, type %d ",
+			   ((struct bts_action *)ptr)->size,
+			   ((struct bts_action *)ptr)->type);
+
+		action_ptr = &(((struct bts_action *)ptr)->data[0]);
+
+		switch (((struct bts_action *)ptr)->type) {
+		case ACTION_SEND_COMMAND:	/* action send */
+			bt_dev_dbg(lldev->hu.hdev, "S");
+			cmd = (struct hci_command *)action_ptr;
+			err = send_command_from_firmware(lldev, cmd);
+			if (err)
+				goto out_rel_fw;
+			break;
+		case ACTION_WAIT_EVENT:  /* wait */
+			/* no need to wait as command was synchronous */
+			bt_dev_dbg(lldev->hu.hdev, "W");
+			break;
+		case ACTION_DELAY:	/* sleep */
+			bt_dev_info(lldev->hu.hdev, "sleep command in scr");
+			msleep(((struct bts_action_delay *)action_ptr)->msec);
+			break;
+		}
+		len -= (sizeof(struct bts_action) +
+			((struct bts_action *)ptr)->size);
+		ptr += sizeof(struct bts_action) +
+			((struct bts_action *)ptr)->size;
+	}
+
+out_rel_fw:
+	/* fw download complete */
+	release_firmware(fw);
+	return err;
+}
+
+static int ll_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	bdaddr_t bdaddr_swapped;
+	struct sk_buff *skb;
+
+	/* HCI_VS_WRITE_BD_ADDR (at least on a CC2560A chip) expects the BD
+	 * address to be MSB first, but bdaddr_t has the convention of being
+	 * LSB first.
+	 */
+	baswap(&bdaddr_swapped, bdaddr);
+	skb = __hci_cmd_sync(hdev, HCI_VS_WRITE_BD_ADDR, sizeof(bdaddr_t),
+			     &bdaddr_swapped, HCI_INIT_TIMEOUT);
+	if (!IS_ERR(skb))
+		kfree_skb(skb);
+
+	return PTR_ERR_OR_ZERO(skb);
+}
+
+static int ll_setup(struct hci_uart *hu)
+{
+	int err, retry = 3;
+	struct ll_device *lldev;
+	struct serdev_device *serdev = hu->serdev;
+	u32 speed;
+
+	if (!serdev)
+		return 0;
+
+	lldev = serdev_device_get_drvdata(serdev);
+
+	hu->hdev->set_bdaddr = ll_set_bdaddr;
+
+	serdev_device_set_flow_control(serdev, true);
+
+	do {
+		/* Reset the Bluetooth device */
+		gpiod_set_value_cansleep(lldev->enable_gpio, 0);
+		msleep(5);
+		gpiod_set_value_cansleep(lldev->enable_gpio, 1);
+		mdelay(100);
+		err = serdev_device_wait_for_cts(serdev, true, 200);
+		if (err) {
+			bt_dev_err(hu->hdev, "Failed to get CTS");
+			return err;
+		}
+
+		err = download_firmware(lldev);
+		if (!err)
+			break;
+
+		/* Toggle BT_EN and retry */
+		bt_dev_err(hu->hdev, "download firmware failed, retrying...");
+	} while (retry--);
+
+	if (err)
+		return err;
+
+	/* Set BD address if one was specified at probe */
+	if (!bacmp(&lldev->bdaddr, BDADDR_NONE)) {
+		/* This means that there was an error getting the BD address
+		 * during probe, so mark the device as having a bad address.
+		 */
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hu->hdev->quirks);
+	} else if (bacmp(&lldev->bdaddr, BDADDR_ANY)) {
+		err = ll_set_bdaddr(hu->hdev, &lldev->bdaddr);
+		if (err)
+			set_bit(HCI_QUIRK_INVALID_BDADDR, &hu->hdev->quirks);
+	}
+
+	/* Operational speed if any */
+	if (hu->oper_speed)
+		speed = hu->oper_speed;
+	else if (hu->proto->oper_speed)
+		speed = hu->proto->oper_speed;
+	else
+		speed = 0;
+
+	if (speed) {
+		__le32 speed_le = cpu_to_le32(speed);
+		struct sk_buff *skb;
+
+		skb = __hci_cmd_sync(hu->hdev, HCI_VS_UPDATE_UART_HCI_BAUDRATE,
+				     sizeof(speed_le), &speed_le,
+				     HCI_INIT_TIMEOUT);
+		if (!IS_ERR(skb)) {
+			kfree_skb(skb);
+			serdev_device_set_baudrate(serdev, speed);
+		}
+	}
+
+	return 0;
+}
+
+static const struct hci_uart_proto llp;
+
+static int hci_ti_probe(struct serdev_device *serdev)
+{
+	struct hci_uart *hu;
+	struct ll_device *lldev;
+	struct nvmem_cell *bdaddr_cell;
+	u32 max_speed = 3000000;
+
+	lldev = devm_kzalloc(&serdev->dev, sizeof(struct ll_device), GFP_KERNEL);
+	if (!lldev)
+		return -ENOMEM;
+	hu = &lldev->hu;
+
+	serdev_device_set_drvdata(serdev, lldev);
+	lldev->serdev = hu->serdev = serdev;
+
+	lldev->enable_gpio = devm_gpiod_get_optional(&serdev->dev,
+						     "enable",
+						     GPIOD_OUT_LOW);
+	if (IS_ERR(lldev->enable_gpio))
+		return PTR_ERR(lldev->enable_gpio);
+
+	lldev->ext_clk = devm_clk_get(&serdev->dev, "ext_clock");
+	if (IS_ERR(lldev->ext_clk) && PTR_ERR(lldev->ext_clk) != -ENOENT)
+		return PTR_ERR(lldev->ext_clk);
+
+	of_property_read_u32(serdev->dev.of_node, "max-speed", &max_speed);
+	hci_uart_set_speeds(hu, 115200, max_speed);
+
+	/* optional BD address from nvram */
+	bdaddr_cell = nvmem_cell_get(&serdev->dev, "bd-address");
+	if (IS_ERR(bdaddr_cell)) {
+		int err = PTR_ERR(bdaddr_cell);
+
+		if (err == -EPROBE_DEFER)
+			return err;
+
+		/* ENOENT means there is no matching nvmem cell and ENOSYS
+		 * means that nvmem is not enabled in the kernel configuration.
+		 */
+		if (err != -ENOENT && err != -ENOSYS) {
+			/* If there was some other error, give userspace a
+			 * chance to fix the problem instead of failing to load
+			 * the driver. Using BDADDR_NONE as a flag that is
+			 * tested later in the setup function.
+			 */
+			dev_warn(&serdev->dev,
+				 "Failed to get \"bd-address\" nvmem cell (%d)\n",
+				 err);
+			bacpy(&lldev->bdaddr, BDADDR_NONE);
+		}
+	} else {
+		bdaddr_t *bdaddr;
+		size_t len;
+
+		bdaddr = nvmem_cell_read(bdaddr_cell, &len);
+		nvmem_cell_put(bdaddr_cell);
+		if (IS_ERR(bdaddr)) {
+			dev_err(&serdev->dev, "Failed to read nvmem bd-address\n");
+			return PTR_ERR(bdaddr);
+		}
+		if (len != sizeof(bdaddr_t)) {
+			dev_err(&serdev->dev, "Invalid nvmem bd-address length\n");
+			kfree(bdaddr);
+			return -EINVAL;
+		}
+
+		/* As per the device tree bindings, the value from nvmem is
+		 * expected to be MSB first, but in the kernel it is expected
+		 * that bdaddr_t is LSB first.
+		 */
+		baswap(&lldev->bdaddr, bdaddr);
+		kfree(bdaddr);
+	}
+
+	return hci_uart_register_device(hu, &llp);
+}
+
+static void hci_ti_remove(struct serdev_device *serdev)
+{
+	struct ll_device *lldev = serdev_device_get_drvdata(serdev);
+
+	hci_uart_unregister_device(&lldev->hu);
+}
+
+static const struct of_device_id hci_ti_of_match[] = {
+	{ .compatible = "ti,cc2560" },
+	{ .compatible = "ti,wl1271-st" },
+	{ .compatible = "ti,wl1273-st" },
+	{ .compatible = "ti,wl1281-st" },
+	{ .compatible = "ti,wl1283-st" },
+	{ .compatible = "ti,wl1285-st" },
+	{ .compatible = "ti,wl1801-st" },
+	{ .compatible = "ti,wl1805-st" },
+	{ .compatible = "ti,wl1807-st" },
+	{ .compatible = "ti,wl1831-st" },
+	{ .compatible = "ti,wl1835-st" },
+	{ .compatible = "ti,wl1837-st" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hci_ti_of_match);
+
+static struct serdev_device_driver hci_ti_drv = {
+	.driver		= {
+		.name	= "hci-ti",
+		.of_match_table = of_match_ptr(hci_ti_of_match),
+	},
+	.probe	= hci_ti_probe,
+	.remove	= hci_ti_remove,
+};
+#else
+#define ll_setup NULL
+#endif
+
+static const struct hci_uart_proto llp = {
+	.id		= HCI_UART_LL,
+	.name		= "LL",
+	.setup		= ll_setup,
+	.open		= ll_open,
+	.close		= ll_close,
+	.recv		= ll_recv,
+	.enqueue	= ll_enqueue,
+	.dequeue	= ll_dequeue,
+	.flush		= ll_flush,
+};
+
+int __init ll_init(void)
+{
+	serdev_device_driver_register(&hci_ti_drv);
+
+	return hci_uart_register_proto(&llp);
+}
+
+int __exit ll_deinit(void)
+{
+	serdev_device_driver_unregister(&hci_ti_drv);
+
+	return hci_uart_unregister_proto(&llp);
+}
diff --git a/drivers/bluetooth/hci_mrvl.c b/drivers/bluetooth/hci_mrvl.c
new file mode 100644
index 000000000..fbc3f7c3a
--- /dev/null
+++ b/drivers/bluetooth/hci_mrvl.c
@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Bluetooth HCI UART driver for marvell devices
+ *
+ *  Copyright (C) 2016  Marvell International Ltd.
+ *  Copyright (C) 2016  Intel Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/of.h>
+#include <linux/serdev.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+
+#define HCI_FW_REQ_PKT 0xA5
+#define HCI_CHIP_VER_PKT 0xAA
+
+#define MRVL_ACK 0x5A
+#define MRVL_NAK 0xBF
+#define MRVL_RAW_DATA 0x1F
+
+enum {
+	STATE_CHIP_VER_PENDING,
+	STATE_FW_REQ_PENDING,
+};
+
+struct mrvl_data {
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+	struct sk_buff_head rawq;
+	unsigned long flags;
+	unsigned int tx_len;
+	u8 id, rev;
+};
+
+struct mrvl_serdev {
+	struct hci_uart hu;
+};
+
+struct hci_mrvl_pkt {
+	__le16 lhs;
+	__le16 rhs;
+} __packed;
+#define HCI_MRVL_PKT_SIZE 4
+
+static int mrvl_open(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl;
+	int ret;
+
+	BT_DBG("hu %p", hu);
+
+	if (!hci_uart_has_flow_control(hu))
+		return -EOPNOTSUPP;
+
+	mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL);
+	if (!mrvl)
+		return -ENOMEM;
+
+	skb_queue_head_init(&mrvl->txq);
+	skb_queue_head_init(&mrvl->rawq);
+
+	set_bit(STATE_CHIP_VER_PENDING, &mrvl->flags);
+
+	hu->priv = mrvl;
+
+	if (hu->serdev) {
+		ret = serdev_device_open(hu->serdev);
+		if (ret)
+			goto err;
+	}
+
+	return 0;
+err:
+	kfree(mrvl);
+
+	return ret;
+}
+
+static int mrvl_close(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	if (hu->serdev)
+		serdev_device_close(hu->serdev);
+
+	skb_queue_purge(&mrvl->txq);
+	skb_queue_purge(&mrvl->rawq);
+	kfree_skb(mrvl->rx_skb);
+	kfree(mrvl);
+
+	hu->priv = NULL;
+	return 0;
+}
+
+static int mrvl_flush(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&mrvl->txq);
+	skb_queue_purge(&mrvl->rawq);
+
+	return 0;
+}
+
+static struct sk_buff *mrvl_dequeue(struct hci_uart *hu)
+{
+	struct mrvl_data *mrvl = hu->priv;
+	struct sk_buff *skb;
+
+	skb = skb_dequeue(&mrvl->txq);
+	if (!skb) {
+		/* Any raw data ? */
+		skb = skb_dequeue(&mrvl->rawq);
+	} else {
+		/* Prepend skb with frame type */
+		memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
+	}
+
+	return skb;
+}
+
+static int mrvl_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	skb_queue_tail(&mrvl->txq, skb);
+	return 0;
+}
+
+static void mrvl_send_ack(struct hci_uart *hu, unsigned char type)
+{
+	struct mrvl_data *mrvl = hu->priv;
+	struct sk_buff *skb;
+
+	/* No H4 payload, only 1 byte header */
+	skb = bt_skb_alloc(0, GFP_ATOMIC);
+	if (!skb) {
+		bt_dev_err(hu->hdev, "Unable to alloc ack/nak packet");
+		return;
+	}
+	hci_skb_pkt_type(skb) = type;
+
+	skb_queue_tail(&mrvl->txq, skb);
+	hci_uart_tx_wakeup(hu);
+}
+
+static int mrvl_recv_fw_req(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_mrvl_pkt *pkt = (void *)skb->data;
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct mrvl_data *mrvl = hu->priv;
+	int ret = 0;
+
+	if ((pkt->lhs ^ pkt->rhs) != 0xffff) {
+		bt_dev_err(hdev, "Corrupted mrvl header");
+		mrvl_send_ack(hu, MRVL_NAK);
+		ret = -EINVAL;
+		goto done;
+	}
+	mrvl_send_ack(hu, MRVL_ACK);
+
+	if (!test_bit(STATE_FW_REQ_PENDING, &mrvl->flags)) {
+		bt_dev_err(hdev, "Received unexpected firmware request");
+		ret = -EINVAL;
+		goto done;
+	}
+
+	mrvl->tx_len = le16_to_cpu(pkt->lhs);
+
+	clear_bit(STATE_FW_REQ_PENDING, &mrvl->flags);
+	smp_mb__after_atomic();
+	wake_up_bit(&mrvl->flags, STATE_FW_REQ_PENDING);
+
+done:
+	kfree_skb(skb);
+	return ret;
+}
+
+static int mrvl_recv_chip_ver(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_mrvl_pkt *pkt = (void *)skb->data;
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct mrvl_data *mrvl = hu->priv;
+	u16 version = le16_to_cpu(pkt->lhs);
+	int ret = 0;
+
+	if ((pkt->lhs ^ pkt->rhs) != 0xffff) {
+		bt_dev_err(hdev, "Corrupted mrvl header");
+		mrvl_send_ack(hu, MRVL_NAK);
+		ret = -EINVAL;
+		goto done;
+	}
+	mrvl_send_ack(hu, MRVL_ACK);
+
+	if (!test_bit(STATE_CHIP_VER_PENDING, &mrvl->flags)) {
+		bt_dev_err(hdev, "Received unexpected chip version");
+		goto done;
+	}
+
+	mrvl->id = version;
+	mrvl->rev = version >> 8;
+
+	bt_dev_info(hdev, "Controller id = %x, rev = %x", mrvl->id, mrvl->rev);
+
+	clear_bit(STATE_CHIP_VER_PENDING, &mrvl->flags);
+	smp_mb__after_atomic();
+	wake_up_bit(&mrvl->flags, STATE_CHIP_VER_PENDING);
+
+done:
+	kfree_skb(skb);
+	return ret;
+}
+
+#define HCI_RECV_CHIP_VER \
+	.type = HCI_CHIP_VER_PKT, \
+	.hlen = HCI_MRVL_PKT_SIZE, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = HCI_MRVL_PKT_SIZE
+
+#define HCI_RECV_FW_REQ \
+	.type = HCI_FW_REQ_PKT, \
+	.hlen = HCI_MRVL_PKT_SIZE, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = HCI_MRVL_PKT_SIZE
+
+static const struct h4_recv_pkt mrvl_recv_pkts[] = {
+	{ H4_RECV_ACL,       .recv = hci_recv_frame     },
+	{ H4_RECV_SCO,       .recv = hci_recv_frame     },
+	{ H4_RECV_EVENT,     .recv = hci_recv_frame     },
+	{ HCI_RECV_FW_REQ,   .recv = mrvl_recv_fw_req   },
+	{ HCI_RECV_CHIP_VER, .recv = mrvl_recv_chip_ver },
+};
+
+static int mrvl_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct mrvl_data *mrvl = hu->priv;
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	mrvl->rx_skb = h4_recv_buf(hu->hdev, mrvl->rx_skb, data, count,
+				    mrvl_recv_pkts,
+				    ARRAY_SIZE(mrvl_recv_pkts));
+	if (IS_ERR(mrvl->rx_skb)) {
+		int err = PTR_ERR(mrvl->rx_skb);
+		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+		mrvl->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
+static int mrvl_load_firmware(struct hci_dev *hdev, const char *name)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct mrvl_data *mrvl = hu->priv;
+	const struct firmware *fw = NULL;
+	const u8 *fw_ptr, *fw_max;
+	int err;
+
+	err = request_firmware(&fw, name, &hdev->dev);
+	if (err < 0) {
+		bt_dev_err(hdev, "Failed to load firmware file %s", name);
+		return err;
+	}
+
+	fw_ptr = fw->data;
+	fw_max = fw->data + fw->size;
+
+	bt_dev_info(hdev, "Loading %s", name);
+
+	set_bit(STATE_FW_REQ_PENDING, &mrvl->flags);
+
+	while (fw_ptr <= fw_max) {
+		struct sk_buff *skb;
+
+		/* Controller drives the firmware load by sending firmware
+		 * request packets containing the expected fragment size.
+		 */
+		err = wait_on_bit_timeout(&mrvl->flags, STATE_FW_REQ_PENDING,
+					  TASK_INTERRUPTIBLE,
+					  msecs_to_jiffies(2000));
+		if (err == 1) {
+			bt_dev_err(hdev, "Firmware load interrupted");
+			err = -EINTR;
+			break;
+		} else if (err) {
+			bt_dev_err(hdev, "Firmware request timeout");
+			err = -ETIMEDOUT;
+			break;
+		}
+
+		bt_dev_dbg(hdev, "Firmware request, expecting %d bytes",
+			   mrvl->tx_len);
+
+		if (fw_ptr == fw_max) {
+			/* Controller requests a null size once firmware is
+			 * fully loaded. If controller expects more data, there
+			 * is an issue.
+			 */
+			if (!mrvl->tx_len) {
+				bt_dev_info(hdev, "Firmware loading complete");
+			} else {
+				bt_dev_err(hdev, "Firmware loading failure");
+				err = -EINVAL;
+			}
+			break;
+		}
+
+		if (fw_ptr + mrvl->tx_len > fw_max) {
+			mrvl->tx_len = fw_max - fw_ptr;
+			bt_dev_dbg(hdev, "Adjusting tx_len to %d",
+				   mrvl->tx_len);
+		}
+
+		skb = bt_skb_alloc(mrvl->tx_len, GFP_KERNEL);
+		if (!skb) {
+			bt_dev_err(hdev, "Failed to alloc mem for FW packet");
+			err = -ENOMEM;
+			break;
+		}
+		bt_cb(skb)->pkt_type = MRVL_RAW_DATA;
+
+		skb_put_data(skb, fw_ptr, mrvl->tx_len);
+		fw_ptr += mrvl->tx_len;
+
+		set_bit(STATE_FW_REQ_PENDING, &mrvl->flags);
+
+		skb_queue_tail(&mrvl->rawq, skb);
+		hci_uart_tx_wakeup(hu);
+	}
+
+	release_firmware(fw);
+	return err;
+}
+
+static int mrvl_setup(struct hci_uart *hu)
+{
+	int err;
+
+	hci_uart_set_flow_control(hu, true);
+
+	err = mrvl_load_firmware(hu->hdev, "mrvl/helper_uart_3000000.bin");
+	if (err) {
+		bt_dev_err(hu->hdev, "Unable to download firmware helper");
+		return -EINVAL;
+	}
+
+	/* Let the final ack go out before switching the baudrate */
+	hci_uart_wait_until_sent(hu);
+
+	if (hu->serdev)
+		serdev_device_set_baudrate(hu->serdev, 3000000);
+	else
+		hci_uart_set_baudrate(hu, 3000000);
+
+	hci_uart_set_flow_control(hu, false);
+
+	err = mrvl_load_firmware(hu->hdev, "mrvl/uart8897_bt.bin");
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static const struct hci_uart_proto mrvl_proto = {
+	.id		= HCI_UART_MRVL,
+	.name		= "Marvell",
+	.init_speed	= 115200,
+	.open		= mrvl_open,
+	.close		= mrvl_close,
+	.flush		= mrvl_flush,
+	.setup		= mrvl_setup,
+	.recv		= mrvl_recv,
+	.enqueue	= mrvl_enqueue,
+	.dequeue	= mrvl_dequeue,
+};
+
+static int mrvl_serdev_probe(struct serdev_device *serdev)
+{
+	struct mrvl_serdev *mrvldev;
+
+	mrvldev = devm_kzalloc(&serdev->dev, sizeof(*mrvldev), GFP_KERNEL);
+	if (!mrvldev)
+		return -ENOMEM;
+
+	mrvldev->hu.serdev = serdev;
+	serdev_device_set_drvdata(serdev, mrvldev);
+
+	return hci_uart_register_device(&mrvldev->hu, &mrvl_proto);
+}
+
+static void mrvl_serdev_remove(struct serdev_device *serdev)
+{
+	struct mrvl_serdev *mrvldev = serdev_device_get_drvdata(serdev);
+
+	hci_uart_unregister_device(&mrvldev->hu);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id mrvl_bluetooth_of_match[] = {
+	{ .compatible = "mrvl,88w8897" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mrvl_bluetooth_of_match);
+#endif
+
+static struct serdev_device_driver mrvl_serdev_driver = {
+	.probe = mrvl_serdev_probe,
+	.remove = mrvl_serdev_remove,
+	.driver = {
+		.name = "hci_uart_mrvl",
+		.of_match_table = of_match_ptr(mrvl_bluetooth_of_match),
+	},
+};
+
+int __init mrvl_init(void)
+{
+	serdev_device_driver_register(&mrvl_serdev_driver);
+
+	return hci_uart_register_proto(&mrvl_proto);
+}
+
+int __exit mrvl_deinit(void)
+{
+	serdev_device_driver_unregister(&mrvl_serdev_driver);
+
+	return hci_uart_unregister_proto(&mrvl_proto);
+}
diff --git a/drivers/bluetooth/hci_nokia.c b/drivers/bluetooth/hci_nokia.c
new file mode 100644
index 000000000..97da0b2bf
--- /dev/null
+++ b/drivers/bluetooth/hci_nokia.c
@@ -0,0 +1,811 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Bluetooth HCI UART H4 driver with Nokia Extensions AKA Nokia H4+
+ *
+ *  Copyright (C) 2015 Marcel Holtmann <marcel@holtmann.org>
+ *  Copyright (C) 2015-2017 Sebastian Reichel <sre@kernel.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm_runtime.h>
+#include <linux/serdev.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <asm/unaligned.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+#include "btbcm.h"
+
+#define VERSION "0.1"
+
+#define NOKIA_ID_BCM2048	0x04
+#define NOKIA_ID_TI1271		0x31
+
+#define FIRMWARE_BCM2048	"nokia/bcmfw.bin"
+#define FIRMWARE_TI1271		"nokia/ti1273.bin"
+
+#define HCI_NOKIA_NEG_PKT	0x06
+#define HCI_NOKIA_ALIVE_PKT	0x07
+#define HCI_NOKIA_RADIO_PKT	0x08
+
+#define HCI_NOKIA_NEG_HDR_SIZE		1
+#define HCI_NOKIA_MAX_NEG_SIZE		255
+#define HCI_NOKIA_ALIVE_HDR_SIZE	1
+#define HCI_NOKIA_MAX_ALIVE_SIZE	255
+#define HCI_NOKIA_RADIO_HDR_SIZE	2
+#define HCI_NOKIA_MAX_RADIO_SIZE	255
+
+#define NOKIA_PROTO_PKT		0x44
+#define NOKIA_PROTO_BYTE	0x4c
+
+#define NOKIA_NEG_REQ		0x00
+#define NOKIA_NEG_ACK		0x20
+#define NOKIA_NEG_NAK		0x40
+
+#define H4_TYPE_SIZE		1
+
+#define NOKIA_RECV_ALIVE \
+	.type = HCI_NOKIA_ALIVE_PKT, \
+	.hlen = HCI_NOKIA_ALIVE_HDR_SIZE, \
+	.loff = 0, \
+	.lsize = 1, \
+	.maxlen = HCI_NOKIA_MAX_ALIVE_SIZE \
+
+#define NOKIA_RECV_NEG \
+	.type = HCI_NOKIA_NEG_PKT, \
+	.hlen = HCI_NOKIA_NEG_HDR_SIZE, \
+	.loff = 0, \
+	.lsize = 1, \
+	.maxlen = HCI_NOKIA_MAX_NEG_SIZE \
+
+#define NOKIA_RECV_RADIO \
+	.type = HCI_NOKIA_RADIO_PKT, \
+	.hlen = HCI_NOKIA_RADIO_HDR_SIZE, \
+	.loff = 1, \
+	.lsize = 1, \
+	.maxlen = HCI_NOKIA_MAX_RADIO_SIZE \
+
+struct hci_nokia_neg_hdr {
+	u8	dlen;
+} __packed;
+
+struct hci_nokia_neg_cmd {
+	u8	ack;
+	u16	baud;
+	u16	unused1;
+	u8	proto;
+	u16	sys_clk;
+	u16	unused2;
+} __packed;
+
+#define NOKIA_ALIVE_REQ   0x55
+#define NOKIA_ALIVE_RESP  0xcc
+
+struct hci_nokia_alive_hdr {
+	u8	dlen;
+} __packed;
+
+struct hci_nokia_alive_pkt {
+	u8	mid;
+	u8	unused;
+} __packed;
+
+struct hci_nokia_neg_evt {
+	u8	ack;
+	u16	baud;
+	u16	unused1;
+	u8	proto;
+	u16	sys_clk;
+	u16	unused2;
+	u8	man_id;
+	u8	ver_id;
+} __packed;
+
+#define MAX_BAUD_RATE		3692300
+#define SETUP_BAUD_RATE		921600
+#define INIT_BAUD_RATE		120000
+
+struct hci_nokia_radio_hdr {
+	u8	evt;
+	u8	dlen;
+} __packed;
+
+struct nokia_bt_dev {
+	struct hci_uart hu;
+	struct serdev_device *serdev;
+
+	struct gpio_desc *reset;
+	struct gpio_desc *wakeup_host;
+	struct gpio_desc *wakeup_bt;
+	unsigned long sysclk_speed;
+
+	int wake_irq;
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+	bdaddr_t bdaddr;
+
+	int init_error;
+	struct completion init_completion;
+
+	u8 man_id;
+	u8 ver_id;
+
+	bool initialized;
+	bool tx_enabled;
+	bool rx_enabled;
+};
+
+static int nokia_enqueue(struct hci_uart *hu, struct sk_buff *skb);
+
+static void nokia_flow_control(struct serdev_device *serdev, bool enable)
+{
+	if (enable) {
+		serdev_device_set_rts(serdev, true);
+		serdev_device_set_flow_control(serdev, true);
+	} else {
+		serdev_device_set_flow_control(serdev, false);
+		serdev_device_set_rts(serdev, false);
+	}
+}
+
+static irqreturn_t wakeup_handler(int irq, void *data)
+{
+	struct nokia_bt_dev *btdev = data;
+	struct device *dev = &btdev->serdev->dev;
+	int wake_state = gpiod_get_value(btdev->wakeup_host);
+
+	if (btdev->rx_enabled == wake_state)
+		return IRQ_HANDLED;
+
+	if (wake_state)
+		pm_runtime_get(dev);
+	else
+		pm_runtime_put(dev);
+
+	btdev->rx_enabled = wake_state;
+
+	return IRQ_HANDLED;
+}
+
+static int nokia_reset(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	int err;
+
+	/* reset routine */
+	gpiod_set_value_cansleep(btdev->reset, 1);
+	gpiod_set_value_cansleep(btdev->wakeup_bt, 1);
+
+	msleep(100);
+
+	/* safety check */
+	err = gpiod_get_value_cansleep(btdev->wakeup_host);
+	if (err == 1) {
+		dev_err(dev, "reset: host wakeup not low!");
+		return -EPROTO;
+	}
+
+	/* flush queue */
+	serdev_device_write_flush(btdev->serdev);
+
+	/* init uart */
+	nokia_flow_control(btdev->serdev, false);
+	serdev_device_set_baudrate(btdev->serdev, INIT_BAUD_RATE);
+
+	gpiod_set_value_cansleep(btdev->reset, 0);
+
+	/* wait for cts */
+	err = serdev_device_wait_for_cts(btdev->serdev, true, 200);
+	if (err < 0) {
+		dev_err(dev, "CTS not received: %d", err);
+		return err;
+	}
+
+	nokia_flow_control(btdev->serdev, true);
+
+	return 0;
+}
+
+static int nokia_send_alive_packet(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	struct hci_nokia_alive_hdr *hdr;
+	struct hci_nokia_alive_pkt *pkt;
+	struct sk_buff *skb;
+	int len;
+
+	init_completion(&btdev->init_completion);
+
+	len = H4_TYPE_SIZE + sizeof(*hdr) + sizeof(*pkt);
+	skb = bt_skb_alloc(len, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	hci_skb_pkt_type(skb) = HCI_NOKIA_ALIVE_PKT;
+	memset(skb->data, 0x00, len);
+
+	hdr = skb_put(skb, sizeof(*hdr));
+	hdr->dlen = sizeof(*pkt);
+	pkt = skb_put(skb, sizeof(*pkt));
+	pkt->mid = NOKIA_ALIVE_REQ;
+
+	nokia_enqueue(hu, skb);
+	hci_uart_tx_wakeup(hu);
+
+	dev_dbg(dev, "Alive sent");
+
+	if (!wait_for_completion_interruptible_timeout(&btdev->init_completion,
+		msecs_to_jiffies(1000))) {
+		return -ETIMEDOUT;
+	}
+
+	if (btdev->init_error < 0)
+		return btdev->init_error;
+
+	return 0;
+}
+
+static int nokia_send_negotiation(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	struct hci_nokia_neg_cmd *neg_cmd;
+	struct hci_nokia_neg_hdr *neg_hdr;
+	struct sk_buff *skb;
+	int len, err;
+	u16 baud = DIV_ROUND_CLOSEST(btdev->sysclk_speed * 10, SETUP_BAUD_RATE);
+	int sysclk = btdev->sysclk_speed / 1000;
+
+	len = H4_TYPE_SIZE + sizeof(*neg_hdr) + sizeof(*neg_cmd);
+	skb = bt_skb_alloc(len, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	hci_skb_pkt_type(skb) = HCI_NOKIA_NEG_PKT;
+
+	neg_hdr = skb_put(skb, sizeof(*neg_hdr));
+	neg_hdr->dlen = sizeof(*neg_cmd);
+
+	neg_cmd = skb_put(skb, sizeof(*neg_cmd));
+	neg_cmd->ack = NOKIA_NEG_REQ;
+	neg_cmd->baud = cpu_to_le16(baud);
+	neg_cmd->unused1 = 0x0000;
+	neg_cmd->proto = NOKIA_PROTO_BYTE;
+	neg_cmd->sys_clk = cpu_to_le16(sysclk);
+	neg_cmd->unused2 = 0x0000;
+
+	btdev->init_error = 0;
+	init_completion(&btdev->init_completion);
+
+	nokia_enqueue(hu, skb);
+	hci_uart_tx_wakeup(hu);
+
+	dev_dbg(dev, "Negotiation sent");
+
+	if (!wait_for_completion_interruptible_timeout(&btdev->init_completion,
+		msecs_to_jiffies(10000))) {
+		return -ETIMEDOUT;
+	}
+
+	if (btdev->init_error < 0)
+		return btdev->init_error;
+
+	/* Change to previously negotiated speed. Flow Control
+	 * is disabled until bluetooth adapter is ready to avoid
+	 * broken bytes being received.
+	 */
+	nokia_flow_control(btdev->serdev, false);
+	serdev_device_set_baudrate(btdev->serdev, SETUP_BAUD_RATE);
+	err = serdev_device_wait_for_cts(btdev->serdev, true, 200);
+	if (err < 0) {
+		dev_err(dev, "CTS not received: %d", err);
+		return err;
+	}
+	nokia_flow_control(btdev->serdev, true);
+
+	dev_dbg(dev, "Negotiation successful");
+
+	return 0;
+}
+
+static int nokia_setup_fw(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	const char *fwname;
+	const struct firmware *fw;
+	const u8 *fw_ptr;
+	size_t fw_size;
+	int err;
+
+	dev_dbg(dev, "setup firmware");
+
+	if (btdev->man_id == NOKIA_ID_BCM2048) {
+		fwname = FIRMWARE_BCM2048;
+	} else if (btdev->man_id == NOKIA_ID_TI1271) {
+		fwname = FIRMWARE_TI1271;
+	} else {
+		dev_err(dev, "Unsupported bluetooth device!");
+		return -ENODEV;
+	}
+
+	err = request_firmware(&fw, fwname, dev);
+	if (err < 0) {
+		dev_err(dev, "%s: Failed to load Nokia firmware file (%d)",
+			hu->hdev->name, err);
+		return err;
+	}
+
+	fw_ptr = fw->data;
+	fw_size = fw->size;
+
+	while (fw_size >= 4) {
+		u16 pkt_size = get_unaligned_le16(fw_ptr);
+		u8 pkt_type = fw_ptr[2];
+		const struct hci_command_hdr *cmd;
+		u16 opcode;
+		struct sk_buff *skb;
+
+		switch (pkt_type) {
+		case HCI_COMMAND_PKT:
+			cmd = (struct hci_command_hdr *)(fw_ptr + 3);
+			opcode = le16_to_cpu(cmd->opcode);
+
+			skb = __hci_cmd_sync(hu->hdev, opcode, cmd->plen,
+					     fw_ptr + 3 + HCI_COMMAND_HDR_SIZE,
+					     HCI_INIT_TIMEOUT);
+			if (IS_ERR(skb)) {
+				err = PTR_ERR(skb);
+				dev_err(dev, "%s: FW command %04x failed (%d)",
+				       hu->hdev->name, opcode, err);
+				goto done;
+			}
+			kfree_skb(skb);
+			break;
+		case HCI_NOKIA_RADIO_PKT:
+		case HCI_NOKIA_NEG_PKT:
+		case HCI_NOKIA_ALIVE_PKT:
+			break;
+		}
+
+		fw_ptr += pkt_size + 2;
+		fw_size -= pkt_size + 2;
+	}
+
+done:
+	release_firmware(fw);
+	return err;
+}
+
+static int nokia_setup(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	int err;
+
+	btdev->initialized = false;
+
+	nokia_flow_control(btdev->serdev, false);
+
+	pm_runtime_get_sync(dev);
+
+	if (btdev->tx_enabled) {
+		gpiod_set_value_cansleep(btdev->wakeup_bt, 0);
+		pm_runtime_put(&btdev->serdev->dev);
+		btdev->tx_enabled = false;
+	}
+
+	dev_dbg(dev, "protocol setup");
+
+	/* 0. reset connection */
+	err = nokia_reset(hu);
+	if (err < 0) {
+		dev_err(dev, "Reset failed: %d", err);
+		goto out;
+	}
+
+	/* 1. negotiate speed etc */
+	err = nokia_send_negotiation(hu);
+	if (err < 0) {
+		dev_err(dev, "Negotiation failed: %d", err);
+		goto out;
+	}
+
+	/* 2. verify correct setup using alive packet */
+	err = nokia_send_alive_packet(hu);
+	if (err < 0) {
+		dev_err(dev, "Alive check failed: %d", err);
+		goto out;
+	}
+
+	/* 3. send firmware */
+	err = nokia_setup_fw(hu);
+	if (err < 0) {
+		dev_err(dev, "Could not setup FW: %d", err);
+		goto out;
+	}
+
+	nokia_flow_control(btdev->serdev, false);
+	serdev_device_set_baudrate(btdev->serdev, MAX_BAUD_RATE);
+	nokia_flow_control(btdev->serdev, true);
+
+	if (btdev->man_id == NOKIA_ID_BCM2048) {
+		hu->hdev->set_bdaddr = btbcm_set_bdaddr;
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hu->hdev->quirks);
+		dev_dbg(dev, "bcm2048 has invalid bluetooth address!");
+	}
+
+	dev_dbg(dev, "protocol setup done!");
+
+	gpiod_set_value_cansleep(btdev->wakeup_bt, 0);
+	pm_runtime_put(dev);
+	btdev->tx_enabled = false;
+	btdev->initialized = true;
+
+	return 0;
+out:
+	pm_runtime_put(dev);
+
+	return err;
+}
+
+static int nokia_open(struct hci_uart *hu)
+{
+	struct device *dev = &hu->serdev->dev;
+
+	dev_dbg(dev, "protocol open");
+
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+
+static int nokia_flush(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+
+	dev_dbg(&btdev->serdev->dev, "flush device");
+
+	skb_queue_purge(&btdev->txq);
+
+	return 0;
+}
+
+static int nokia_close(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+
+	dev_dbg(dev, "close device");
+
+	btdev->initialized = false;
+
+	skb_queue_purge(&btdev->txq);
+
+	kfree_skb(btdev->rx_skb);
+
+	/* disable module */
+	gpiod_set_value(btdev->reset, 1);
+	gpiod_set_value(btdev->wakeup_bt, 0);
+
+	pm_runtime_disable(&btdev->serdev->dev);
+
+	return 0;
+}
+
+/* Enqueue frame for transmittion (padding, crc, etc) */
+static int nokia_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	int err;
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
+
+	/* Packets must be word aligned */
+	if (skb->len % 2) {
+		err = skb_pad(skb, 1);
+		if (err)
+			return err;
+		skb_put(skb, 1);
+	}
+
+	skb_queue_tail(&btdev->txq, skb);
+
+	return 0;
+}
+
+static int nokia_recv_negotiation_packet(struct hci_dev *hdev,
+					 struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	struct hci_nokia_neg_hdr *hdr;
+	struct hci_nokia_neg_evt *evt;
+	int ret = 0;
+
+	hdr = (struct hci_nokia_neg_hdr *)skb->data;
+	if (hdr->dlen != sizeof(*evt)) {
+		btdev->init_error = -EIO;
+		ret = -EIO;
+		goto finish_neg;
+	}
+
+	evt = skb_pull(skb, sizeof(*hdr));
+
+	if (evt->ack != NOKIA_NEG_ACK) {
+		dev_err(dev, "Negotiation received: wrong reply");
+		btdev->init_error = -EINVAL;
+		ret = -EINVAL;
+		goto finish_neg;
+	}
+
+	btdev->man_id = evt->man_id;
+	btdev->ver_id = evt->ver_id;
+
+	dev_dbg(dev, "Negotiation received: baud=%u:clk=%u:manu=%u:vers=%u",
+		evt->baud, evt->sys_clk, evt->man_id, evt->ver_id);
+
+finish_neg:
+	complete(&btdev->init_completion);
+	kfree_skb(skb);
+	return ret;
+}
+
+static int nokia_recv_alive_packet(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	struct hci_nokia_alive_hdr *hdr;
+	struct hci_nokia_alive_pkt *pkt;
+	int ret = 0;
+
+	hdr = (struct hci_nokia_alive_hdr *)skb->data;
+	if (hdr->dlen != sizeof(*pkt)) {
+		dev_err(dev, "Corrupted alive message");
+		btdev->init_error = -EIO;
+		ret = -EIO;
+		goto finish_alive;
+	}
+
+	pkt = skb_pull(skb, sizeof(*hdr));
+
+	if (pkt->mid != NOKIA_ALIVE_RESP) {
+		dev_err(dev, "Alive received: invalid response: 0x%02x!",
+			pkt->mid);
+		btdev->init_error = -EINVAL;
+		ret = -EINVAL;
+		goto finish_alive;
+	}
+
+	dev_dbg(dev, "Alive received");
+
+finish_alive:
+	complete(&btdev->init_completion);
+	kfree_skb(skb);
+	return ret;
+}
+
+static int nokia_recv_radio(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	/* Packets received on the dedicated radio channel are
+	 * HCI events and so feed them back into the core.
+	 */
+	hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
+	return hci_recv_frame(hdev, skb);
+}
+
+/* Recv data */
+static const struct h4_recv_pkt nokia_recv_pkts[] = {
+	{ H4_RECV_ACL,		.recv = hci_recv_frame },
+	{ H4_RECV_SCO,		.recv = hci_recv_frame },
+	{ H4_RECV_EVENT,	.recv = hci_recv_frame },
+	{ NOKIA_RECV_ALIVE,	.recv = nokia_recv_alive_packet },
+	{ NOKIA_RECV_NEG,	.recv = nokia_recv_negotiation_packet },
+	{ NOKIA_RECV_RADIO,	.recv = nokia_recv_radio },
+};
+
+static int nokia_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	int err;
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	btdev->rx_skb = h4_recv_buf(hu->hdev, btdev->rx_skb, data, count,
+				  nokia_recv_pkts, ARRAY_SIZE(nokia_recv_pkts));
+	if (IS_ERR(btdev->rx_skb)) {
+		err = PTR_ERR(btdev->rx_skb);
+		dev_err(dev, "Frame reassembly failed (%d)", err);
+		btdev->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
+static struct sk_buff *nokia_dequeue(struct hci_uart *hu)
+{
+	struct nokia_bt_dev *btdev = hu->priv;
+	struct device *dev = &btdev->serdev->dev;
+	struct sk_buff *result = skb_dequeue(&btdev->txq);
+
+	if (!btdev->initialized)
+		return result;
+
+	if (btdev->tx_enabled == !!result)
+		return result;
+
+	if (result) {
+		pm_runtime_get_sync(dev);
+		gpiod_set_value_cansleep(btdev->wakeup_bt, 1);
+	} else {
+		serdev_device_wait_until_sent(btdev->serdev, 0);
+		gpiod_set_value_cansleep(btdev->wakeup_bt, 0);
+		pm_runtime_put(dev);
+	}
+
+	btdev->tx_enabled = !!result;
+
+	return result;
+}
+
+static const struct hci_uart_proto nokia_proto = {
+	.id		= HCI_UART_NOKIA,
+	.name		= "Nokia",
+	.open		= nokia_open,
+	.close		= nokia_close,
+	.recv		= nokia_recv,
+	.enqueue	= nokia_enqueue,
+	.dequeue	= nokia_dequeue,
+	.flush		= nokia_flush,
+	.setup		= nokia_setup,
+	.manufacturer	= 1,
+};
+
+static int nokia_bluetooth_serdev_probe(struct serdev_device *serdev)
+{
+	struct device *dev = &serdev->dev;
+	struct nokia_bt_dev *btdev;
+	struct clk *sysclk;
+	int err = 0;
+
+	btdev = devm_kzalloc(dev, sizeof(*btdev), GFP_KERNEL);
+	if (!btdev)
+		return -ENOMEM;
+
+	btdev->hu.serdev = btdev->serdev = serdev;
+	serdev_device_set_drvdata(serdev, btdev);
+
+	btdev->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(btdev->reset)) {
+		err = PTR_ERR(btdev->reset);
+		dev_err(dev, "could not get reset gpio: %d", err);
+		return err;
+	}
+
+	btdev->wakeup_host = devm_gpiod_get(dev, "host-wakeup", GPIOD_IN);
+	if (IS_ERR(btdev->wakeup_host)) {
+		err = PTR_ERR(btdev->wakeup_host);
+		dev_err(dev, "could not get host wakeup gpio: %d", err);
+		return err;
+	}
+
+	btdev->wake_irq = gpiod_to_irq(btdev->wakeup_host);
+
+	err = devm_request_threaded_irq(dev, btdev->wake_irq, NULL,
+		wakeup_handler,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+		"wakeup", btdev);
+	if (err) {
+		dev_err(dev, "could request wakeup irq: %d", err);
+		return err;
+	}
+
+	btdev->wakeup_bt = devm_gpiod_get(dev, "bluetooth-wakeup",
+					   GPIOD_OUT_LOW);
+	if (IS_ERR(btdev->wakeup_bt)) {
+		err = PTR_ERR(btdev->wakeup_bt);
+		dev_err(dev, "could not get BT wakeup gpio: %d", err);
+		return err;
+	}
+
+	sysclk = devm_clk_get(dev, "sysclk");
+	if (IS_ERR(sysclk)) {
+		err = PTR_ERR(sysclk);
+		dev_err(dev, "could not get sysclk: %d", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(sysclk);
+	if (err) {
+		dev_err(dev, "could not enable sysclk: %d", err);
+		return err;
+	}
+	btdev->sysclk_speed = clk_get_rate(sysclk);
+	clk_disable_unprepare(sysclk);
+
+	skb_queue_head_init(&btdev->txq);
+
+	btdev->hu.priv = btdev;
+	btdev->hu.alignment = 2; /* Nokia H4+ is word aligned */
+
+	err = hci_uart_register_device(&btdev->hu, &nokia_proto);
+	if (err) {
+		dev_err(dev, "could not register bluetooth uart: %d", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static void nokia_bluetooth_serdev_remove(struct serdev_device *serdev)
+{
+	struct nokia_bt_dev *btdev = serdev_device_get_drvdata(serdev);
+
+	hci_uart_unregister_device(&btdev->hu);
+}
+
+static int nokia_bluetooth_runtime_suspend(struct device *dev)
+{
+	struct serdev_device *serdev = to_serdev_device(dev);
+
+	nokia_flow_control(serdev, false);
+	return 0;
+}
+
+static int nokia_bluetooth_runtime_resume(struct device *dev)
+{
+	struct serdev_device *serdev = to_serdev_device(dev);
+
+	nokia_flow_control(serdev, true);
+	return 0;
+}
+
+static const struct dev_pm_ops nokia_bluetooth_pm_ops = {
+	SET_RUNTIME_PM_OPS(nokia_bluetooth_runtime_suspend,
+			   nokia_bluetooth_runtime_resume,
+			   NULL)
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id nokia_bluetooth_of_match[] = {
+	{ .compatible = "nokia,h4p-bluetooth", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, nokia_bluetooth_of_match);
+#endif
+
+static struct serdev_device_driver nokia_bluetooth_serdev_driver = {
+	.probe = nokia_bluetooth_serdev_probe,
+	.remove = nokia_bluetooth_serdev_remove,
+	.driver = {
+		.name = "nokia-bluetooth",
+		.pm = &nokia_bluetooth_pm_ops,
+		.of_match_table = of_match_ptr(nokia_bluetooth_of_match),
+	},
+};
+
+module_serdev_device_driver(nokia_bluetooth_serdev_driver);
+
+MODULE_AUTHOR("Sebastian Reichel <sre@kernel.org>");
+MODULE_DESCRIPTION("Bluetooth HCI UART Nokia H4+ driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
new file mode 100644
index 000000000..45dffd2cb
--- /dev/null
+++ b/drivers/bluetooth/hci_qca.c
@@ -0,0 +1,2376 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Bluetooth Software UART Qualcomm protocol
+ *
+ *  HCI_IBS (HCI In-Band Sleep) is Qualcomm's power management
+ *  protocol extension to H4.
+ *
+ *  Copyright (C) 2007 Texas Instruments, Inc.
+ *  Copyright (c) 2010, 2012, 2018 The Linux Foundation. All rights reserved.
+ *
+ *  Acknowledgements:
+ *  This file is based on hci_ll.c, which was...
+ *  Written by Ohad Ben-Cohen <ohad@bencohen.org>
+ *  which was in turn based on hci_h4.c, which was written
+ *  by Maxim Krasnyansky and Marcel Holtmann.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/devcoredump.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/acpi.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/serdev.h>
+#include <linux/mutex.h>
+#include <asm/unaligned.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+#include "btqca.h"
+
+/* HCI_IBS protocol messages */
+#define HCI_IBS_SLEEP_IND	0xFE
+#define HCI_IBS_WAKE_IND	0xFD
+#define HCI_IBS_WAKE_ACK	0xFC
+#define HCI_MAX_IBS_SIZE	10
+
+#define IBS_WAKE_RETRANS_TIMEOUT_MS	100
+#define IBS_BTSOC_TX_IDLE_TIMEOUT_MS	200
+#define IBS_HOST_TX_IDLE_TIMEOUT_MS	2000
+#define CMD_TRANS_TIMEOUT_MS		100
+#define MEMDUMP_TIMEOUT_MS		8000
+#define IBS_DISABLE_SSR_TIMEOUT_MS \
+	(MEMDUMP_TIMEOUT_MS + FW_DOWNLOAD_TIMEOUT_MS)
+#define FW_DOWNLOAD_TIMEOUT_MS		3000
+
+/* susclk rate */
+#define SUSCLK_RATE_32KHZ	32768
+
+/* Controller debug log header */
+#define QCA_DEBUG_HANDLE	0x2EDC
+
+/* max retry count when init fails */
+#define MAX_INIT_RETRIES 3
+
+/* Controller dump header */
+#define QCA_SSR_DUMP_HANDLE		0x0108
+#define QCA_DUMP_PACKET_SIZE		255
+#define QCA_LAST_SEQUENCE_NUM		0xFFFF
+#define QCA_CRASHBYTE_PACKET_LEN	1096
+#define QCA_MEMDUMP_BYTE		0xFB
+
+enum qca_flags {
+	QCA_IBS_DISABLED,
+	QCA_DROP_VENDOR_EVENT,
+	QCA_SUSPENDING,
+	QCA_MEMDUMP_COLLECTION,
+	QCA_HW_ERROR_EVENT,
+	QCA_SSR_TRIGGERED,
+	QCA_BT_OFF,
+	QCA_ROM_FW,
+	QCA_DEBUGFS_CREATED,
+};
+
+enum qca_capabilities {
+	QCA_CAP_WIDEBAND_SPEECH = BIT(0),
+	QCA_CAP_VALID_LE_STATES = BIT(1),
+};
+
+/* HCI_IBS transmit side sleep protocol states */
+enum tx_ibs_states {
+	HCI_IBS_TX_ASLEEP,
+	HCI_IBS_TX_WAKING,
+	HCI_IBS_TX_AWAKE,
+};
+
+/* HCI_IBS receive side sleep protocol states */
+enum rx_states {
+	HCI_IBS_RX_ASLEEP,
+	HCI_IBS_RX_AWAKE,
+};
+
+/* HCI_IBS transmit and receive side clock state vote */
+enum hci_ibs_clock_state_vote {
+	HCI_IBS_VOTE_STATS_UPDATE,
+	HCI_IBS_TX_VOTE_CLOCK_ON,
+	HCI_IBS_TX_VOTE_CLOCK_OFF,
+	HCI_IBS_RX_VOTE_CLOCK_ON,
+	HCI_IBS_RX_VOTE_CLOCK_OFF,
+};
+
+/* Controller memory dump states */
+enum qca_memdump_states {
+	QCA_MEMDUMP_IDLE,
+	QCA_MEMDUMP_COLLECTING,
+	QCA_MEMDUMP_COLLECTED,
+	QCA_MEMDUMP_TIMEOUT,
+};
+
+struct qca_memdump_data {
+	char *memdump_buf_head;
+	char *memdump_buf_tail;
+	u32 current_seq_no;
+	u32 received_dump;
+	u32 ram_dump_size;
+};
+
+struct qca_memdump_event_hdr {
+	__u8    evt;
+	__u8    plen;
+	__u16   opcode;
+	__u16   seq_no;
+	__u8    reserved;
+} __packed;
+
+
+struct qca_dump_size {
+	u32 dump_size;
+} __packed;
+
+struct qca_data {
+	struct hci_uart *hu;
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+	struct sk_buff_head tx_wait_q;	/* HCI_IBS wait queue	*/
+	struct sk_buff_head rx_memdump_q;	/* Memdump wait queue	*/
+	spinlock_t hci_ibs_lock;	/* HCI_IBS state lock	*/
+	u8 tx_ibs_state;	/* HCI_IBS transmit side power state*/
+	u8 rx_ibs_state;	/* HCI_IBS receive side power state */
+	bool tx_vote;		/* Clock must be on for TX */
+	bool rx_vote;		/* Clock must be on for RX */
+	struct timer_list tx_idle_timer;
+	u32 tx_idle_delay;
+	struct timer_list wake_retrans_timer;
+	u32 wake_retrans;
+	struct workqueue_struct *workqueue;
+	struct work_struct ws_awake_rx;
+	struct work_struct ws_awake_device;
+	struct work_struct ws_rx_vote_off;
+	struct work_struct ws_tx_vote_off;
+	struct work_struct ctrl_memdump_evt;
+	struct delayed_work ctrl_memdump_timeout;
+	struct qca_memdump_data *qca_memdump;
+	unsigned long flags;
+	struct completion drop_ev_comp;
+	wait_queue_head_t suspend_wait_q;
+	enum qca_memdump_states memdump_state;
+	struct mutex hci_memdump_lock;
+
+	/* For debugging purpose */
+	u64 ibs_sent_wacks;
+	u64 ibs_sent_slps;
+	u64 ibs_sent_wakes;
+	u64 ibs_recv_wacks;
+	u64 ibs_recv_slps;
+	u64 ibs_recv_wakes;
+	u64 vote_last_jif;
+	u32 vote_on_ms;
+	u32 vote_off_ms;
+	u64 tx_votes_on;
+	u64 rx_votes_on;
+	u64 tx_votes_off;
+	u64 rx_votes_off;
+	u64 votes_on;
+	u64 votes_off;
+};
+
+enum qca_speed_type {
+	QCA_INIT_SPEED = 1,
+	QCA_OPER_SPEED
+};
+
+/*
+ * Voltage regulator information required for configuring the
+ * QCA Bluetooth chipset
+ */
+struct qca_vreg {
+	const char *name;
+	unsigned int load_uA;
+};
+
+struct qca_device_data {
+	enum qca_btsoc_type soc_type;
+	struct qca_vreg *vregs;
+	size_t num_vregs;
+	uint32_t capabilities;
+};
+
+/*
+ * Platform data for the QCA Bluetooth power driver.
+ */
+struct qca_power {
+	struct device *dev;
+	struct regulator_bulk_data *vreg_bulk;
+	int num_vregs;
+	bool vregs_on;
+};
+
+struct qca_serdev {
+	struct hci_uart	 serdev_hu;
+	struct gpio_desc *bt_en;
+	struct gpio_desc *sw_ctrl;
+	struct clk	 *susclk;
+	enum qca_btsoc_type btsoc_type;
+	struct qca_power *bt_power;
+	u32 init_speed;
+	u32 oper_speed;
+	const char *firmware_name;
+};
+
+static int qca_regulator_enable(struct qca_serdev *qcadev);
+static void qca_regulator_disable(struct qca_serdev *qcadev);
+static void qca_power_shutdown(struct hci_uart *hu);
+static int qca_power_off(struct hci_dev *hdev);
+static void qca_controller_memdump(struct work_struct *work);
+
+static enum qca_btsoc_type qca_soc_type(struct hci_uart *hu)
+{
+	enum qca_btsoc_type soc_type;
+
+	if (hu->serdev) {
+		struct qca_serdev *qsd = serdev_device_get_drvdata(hu->serdev);
+
+		soc_type = qsd->btsoc_type;
+	} else {
+		soc_type = QCA_ROME;
+	}
+
+	return soc_type;
+}
+
+static const char *qca_get_firmware_name(struct hci_uart *hu)
+{
+	if (hu->serdev) {
+		struct qca_serdev *qsd = serdev_device_get_drvdata(hu->serdev);
+
+		return qsd->firmware_name;
+	} else {
+		return NULL;
+	}
+}
+
+static void __serial_clock_on(struct tty_struct *tty)
+{
+	/* TODO: Some chipset requires to enable UART clock on client
+	 * side to save power consumption or manual work is required.
+	 * Please put your code to control UART clock here if needed
+	 */
+}
+
+static void __serial_clock_off(struct tty_struct *tty)
+{
+	/* TODO: Some chipset requires to disable UART clock on client
+	 * side to save power consumption or manual work is required.
+	 * Please put your code to control UART clock off here if needed
+	 */
+}
+
+/* serial_clock_vote needs to be called with the ibs lock held */
+static void serial_clock_vote(unsigned long vote, struct hci_uart *hu)
+{
+	struct qca_data *qca = hu->priv;
+	unsigned int diff;
+
+	bool old_vote = (qca->tx_vote | qca->rx_vote);
+	bool new_vote;
+
+	switch (vote) {
+	case HCI_IBS_VOTE_STATS_UPDATE:
+		diff = jiffies_to_msecs(jiffies - qca->vote_last_jif);
+
+		if (old_vote)
+			qca->vote_off_ms += diff;
+		else
+			qca->vote_on_ms += diff;
+		return;
+
+	case HCI_IBS_TX_VOTE_CLOCK_ON:
+		qca->tx_vote = true;
+		qca->tx_votes_on++;
+		break;
+
+	case HCI_IBS_RX_VOTE_CLOCK_ON:
+		qca->rx_vote = true;
+		qca->rx_votes_on++;
+		break;
+
+	case HCI_IBS_TX_VOTE_CLOCK_OFF:
+		qca->tx_vote = false;
+		qca->tx_votes_off++;
+		break;
+
+	case HCI_IBS_RX_VOTE_CLOCK_OFF:
+		qca->rx_vote = false;
+		qca->rx_votes_off++;
+		break;
+
+	default:
+		BT_ERR("Voting irregularity");
+		return;
+	}
+
+	new_vote = qca->rx_vote | qca->tx_vote;
+
+	if (new_vote != old_vote) {
+		if (new_vote)
+			__serial_clock_on(hu->tty);
+		else
+			__serial_clock_off(hu->tty);
+
+		BT_DBG("Vote serial clock %s(%s)", new_vote ? "true" : "false",
+		       vote ? "true" : "false");
+
+		diff = jiffies_to_msecs(jiffies - qca->vote_last_jif);
+
+		if (new_vote) {
+			qca->votes_on++;
+			qca->vote_off_ms += diff;
+		} else {
+			qca->votes_off++;
+			qca->vote_on_ms += diff;
+		}
+		qca->vote_last_jif = jiffies;
+	}
+}
+
+/* Builds and sends an HCI_IBS command packet.
+ * These are very simple packets with only 1 cmd byte.
+ */
+static int send_hci_ibs_cmd(u8 cmd, struct hci_uart *hu)
+{
+	int err = 0;
+	struct sk_buff *skb = NULL;
+	struct qca_data *qca = hu->priv;
+
+	BT_DBG("hu %p send hci ibs cmd 0x%x", hu, cmd);
+
+	skb = bt_skb_alloc(1, GFP_ATOMIC);
+	if (!skb) {
+		BT_ERR("Failed to allocate memory for HCI_IBS packet");
+		return -ENOMEM;
+	}
+
+	/* Assign HCI_IBS type */
+	skb_put_u8(skb, cmd);
+
+	skb_queue_tail(&qca->txq, skb);
+
+	return err;
+}
+
+static void qca_wq_awake_device(struct work_struct *work)
+{
+	struct qca_data *qca = container_of(work, struct qca_data,
+					    ws_awake_device);
+	struct hci_uart *hu = qca->hu;
+	unsigned long retrans_delay;
+	unsigned long flags;
+
+	BT_DBG("hu %p wq awake device", hu);
+
+	/* Vote for serial clock */
+	serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_ON, hu);
+
+	spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+	/* Send wake indication to device */
+	if (send_hci_ibs_cmd(HCI_IBS_WAKE_IND, hu) < 0)
+		BT_ERR("Failed to send WAKE to device");
+
+	qca->ibs_sent_wakes++;
+
+	/* Start retransmit timer */
+	retrans_delay = msecs_to_jiffies(qca->wake_retrans);
+	mod_timer(&qca->wake_retrans_timer, jiffies + retrans_delay);
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+	/* Actually send the packets */
+	hci_uart_tx_wakeup(hu);
+}
+
+static void qca_wq_awake_rx(struct work_struct *work)
+{
+	struct qca_data *qca = container_of(work, struct qca_data,
+					    ws_awake_rx);
+	struct hci_uart *hu = qca->hu;
+	unsigned long flags;
+
+	BT_DBG("hu %p wq awake rx", hu);
+
+	serial_clock_vote(HCI_IBS_RX_VOTE_CLOCK_ON, hu);
+
+	spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+	qca->rx_ibs_state = HCI_IBS_RX_AWAKE;
+
+	/* Always acknowledge device wake up,
+	 * sending IBS message doesn't count as TX ON.
+	 */
+	if (send_hci_ibs_cmd(HCI_IBS_WAKE_ACK, hu) < 0)
+		BT_ERR("Failed to acknowledge device wake up");
+
+	qca->ibs_sent_wacks++;
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+	/* Actually send the packets */
+	hci_uart_tx_wakeup(hu);
+}
+
+static void qca_wq_serial_rx_clock_vote_off(struct work_struct *work)
+{
+	struct qca_data *qca = container_of(work, struct qca_data,
+					    ws_rx_vote_off);
+	struct hci_uart *hu = qca->hu;
+
+	BT_DBG("hu %p rx clock vote off", hu);
+
+	serial_clock_vote(HCI_IBS_RX_VOTE_CLOCK_OFF, hu);
+}
+
+static void qca_wq_serial_tx_clock_vote_off(struct work_struct *work)
+{
+	struct qca_data *qca = container_of(work, struct qca_data,
+					    ws_tx_vote_off);
+	struct hci_uart *hu = qca->hu;
+
+	BT_DBG("hu %p tx clock vote off", hu);
+
+	/* Run HCI tx handling unlocked */
+	hci_uart_tx_wakeup(hu);
+
+	/* Now that message queued to tty driver, vote for tty clocks off.
+	 * It is up to the tty driver to pend the clocks off until tx done.
+	 */
+	serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_OFF, hu);
+}
+
+static void hci_ibs_tx_idle_timeout(struct timer_list *t)
+{
+	struct qca_data *qca = from_timer(qca, t, tx_idle_timer);
+	struct hci_uart *hu = qca->hu;
+	unsigned long flags;
+
+	BT_DBG("hu %p idle timeout in %d state", hu, qca->tx_ibs_state);
+
+	spin_lock_irqsave_nested(&qca->hci_ibs_lock,
+				 flags, SINGLE_DEPTH_NESTING);
+
+	switch (qca->tx_ibs_state) {
+	case HCI_IBS_TX_AWAKE:
+		/* TX_IDLE, go to SLEEP */
+		if (send_hci_ibs_cmd(HCI_IBS_SLEEP_IND, hu) < 0) {
+			BT_ERR("Failed to send SLEEP to device");
+			break;
+		}
+		qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
+		qca->ibs_sent_slps++;
+		queue_work(qca->workqueue, &qca->ws_tx_vote_off);
+		break;
+
+	case HCI_IBS_TX_ASLEEP:
+	case HCI_IBS_TX_WAKING:
+	default:
+		BT_ERR("Spurious timeout tx state %d", qca->tx_ibs_state);
+		break;
+	}
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+}
+
+static void hci_ibs_wake_retrans_timeout(struct timer_list *t)
+{
+	struct qca_data *qca = from_timer(qca, t, wake_retrans_timer);
+	struct hci_uart *hu = qca->hu;
+	unsigned long flags, retrans_delay;
+	bool retransmit = false;
+
+	BT_DBG("hu %p wake retransmit timeout in %d state",
+		hu, qca->tx_ibs_state);
+
+	spin_lock_irqsave_nested(&qca->hci_ibs_lock,
+				 flags, SINGLE_DEPTH_NESTING);
+
+	/* Don't retransmit the HCI_IBS_WAKE_IND when suspending. */
+	if (test_bit(QCA_SUSPENDING, &qca->flags)) {
+		spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+		return;
+	}
+
+	switch (qca->tx_ibs_state) {
+	case HCI_IBS_TX_WAKING:
+		/* No WAKE_ACK, retransmit WAKE */
+		retransmit = true;
+		if (send_hci_ibs_cmd(HCI_IBS_WAKE_IND, hu) < 0) {
+			BT_ERR("Failed to acknowledge device wake up");
+			break;
+		}
+		qca->ibs_sent_wakes++;
+		retrans_delay = msecs_to_jiffies(qca->wake_retrans);
+		mod_timer(&qca->wake_retrans_timer, jiffies + retrans_delay);
+		break;
+
+	case HCI_IBS_TX_ASLEEP:
+	case HCI_IBS_TX_AWAKE:
+	default:
+		BT_ERR("Spurious timeout tx state %d", qca->tx_ibs_state);
+		break;
+	}
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+	if (retransmit)
+		hci_uart_tx_wakeup(hu);
+}
+
+
+static void qca_controller_memdump_timeout(struct work_struct *work)
+{
+	struct qca_data *qca = container_of(work, struct qca_data,
+					ctrl_memdump_timeout.work);
+	struct hci_uart *hu = qca->hu;
+
+	mutex_lock(&qca->hci_memdump_lock);
+	if (test_bit(QCA_MEMDUMP_COLLECTION, &qca->flags)) {
+		qca->memdump_state = QCA_MEMDUMP_TIMEOUT;
+		if (!test_bit(QCA_HW_ERROR_EVENT, &qca->flags)) {
+			/* Inject hw error event to reset the device
+			 * and driver.
+			 */
+			hci_reset_dev(hu->hdev);
+		}
+	}
+
+	mutex_unlock(&qca->hci_memdump_lock);
+}
+
+
+/* Initialize protocol */
+static int qca_open(struct hci_uart *hu)
+{
+	struct qca_serdev *qcadev;
+	struct qca_data *qca;
+
+	BT_DBG("hu %p qca_open", hu);
+
+	if (!hci_uart_has_flow_control(hu))
+		return -EOPNOTSUPP;
+
+	qca = kzalloc(sizeof(struct qca_data), GFP_KERNEL);
+	if (!qca)
+		return -ENOMEM;
+
+	skb_queue_head_init(&qca->txq);
+	skb_queue_head_init(&qca->tx_wait_q);
+	skb_queue_head_init(&qca->rx_memdump_q);
+	spin_lock_init(&qca->hci_ibs_lock);
+	mutex_init(&qca->hci_memdump_lock);
+	qca->workqueue = alloc_ordered_workqueue("qca_wq", 0);
+	if (!qca->workqueue) {
+		BT_ERR("QCA Workqueue not initialized properly");
+		kfree(qca);
+		return -ENOMEM;
+	}
+
+	INIT_WORK(&qca->ws_awake_rx, qca_wq_awake_rx);
+	INIT_WORK(&qca->ws_awake_device, qca_wq_awake_device);
+	INIT_WORK(&qca->ws_rx_vote_off, qca_wq_serial_rx_clock_vote_off);
+	INIT_WORK(&qca->ws_tx_vote_off, qca_wq_serial_tx_clock_vote_off);
+	INIT_WORK(&qca->ctrl_memdump_evt, qca_controller_memdump);
+	INIT_DELAYED_WORK(&qca->ctrl_memdump_timeout,
+			  qca_controller_memdump_timeout);
+	init_waitqueue_head(&qca->suspend_wait_q);
+
+	qca->hu = hu;
+	init_completion(&qca->drop_ev_comp);
+
+	/* Assume we start with both sides asleep -- extra wakes OK */
+	qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
+	qca->rx_ibs_state = HCI_IBS_RX_ASLEEP;
+
+	qca->vote_last_jif = jiffies;
+
+	hu->priv = qca;
+
+	if (hu->serdev) {
+		qcadev = serdev_device_get_drvdata(hu->serdev);
+
+		if (qca_is_wcn399x(qcadev->btsoc_type) ||
+		    qca_is_wcn6750(qcadev->btsoc_type))
+			hu->init_speed = qcadev->init_speed;
+
+		if (qcadev->oper_speed)
+			hu->oper_speed = qcadev->oper_speed;
+	}
+
+	timer_setup(&qca->wake_retrans_timer, hci_ibs_wake_retrans_timeout, 0);
+	qca->wake_retrans = IBS_WAKE_RETRANS_TIMEOUT_MS;
+
+	timer_setup(&qca->tx_idle_timer, hci_ibs_tx_idle_timeout, 0);
+	qca->tx_idle_delay = IBS_HOST_TX_IDLE_TIMEOUT_MS;
+
+	BT_DBG("HCI_UART_QCA open, tx_idle_delay=%u, wake_retrans=%u",
+	       qca->tx_idle_delay, qca->wake_retrans);
+
+	return 0;
+}
+
+static void qca_debugfs_init(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct qca_data *qca = hu->priv;
+	struct dentry *ibs_dir;
+	umode_t mode;
+
+	if (!hdev->debugfs)
+		return;
+
+	if (test_and_set_bit(QCA_DEBUGFS_CREATED, &qca->flags))
+		return;
+
+	ibs_dir = debugfs_create_dir("ibs", hdev->debugfs);
+
+	/* read only */
+	mode = 0444;
+	debugfs_create_u8("tx_ibs_state", mode, ibs_dir, &qca->tx_ibs_state);
+	debugfs_create_u8("rx_ibs_state", mode, ibs_dir, &qca->rx_ibs_state);
+	debugfs_create_u64("ibs_sent_sleeps", mode, ibs_dir,
+			   &qca->ibs_sent_slps);
+	debugfs_create_u64("ibs_sent_wakes", mode, ibs_dir,
+			   &qca->ibs_sent_wakes);
+	debugfs_create_u64("ibs_sent_wake_acks", mode, ibs_dir,
+			   &qca->ibs_sent_wacks);
+	debugfs_create_u64("ibs_recv_sleeps", mode, ibs_dir,
+			   &qca->ibs_recv_slps);
+	debugfs_create_u64("ibs_recv_wakes", mode, ibs_dir,
+			   &qca->ibs_recv_wakes);
+	debugfs_create_u64("ibs_recv_wake_acks", mode, ibs_dir,
+			   &qca->ibs_recv_wacks);
+	debugfs_create_bool("tx_vote", mode, ibs_dir, &qca->tx_vote);
+	debugfs_create_u64("tx_votes_on", mode, ibs_dir, &qca->tx_votes_on);
+	debugfs_create_u64("tx_votes_off", mode, ibs_dir, &qca->tx_votes_off);
+	debugfs_create_bool("rx_vote", mode, ibs_dir, &qca->rx_vote);
+	debugfs_create_u64("rx_votes_on", mode, ibs_dir, &qca->rx_votes_on);
+	debugfs_create_u64("rx_votes_off", mode, ibs_dir, &qca->rx_votes_off);
+	debugfs_create_u64("votes_on", mode, ibs_dir, &qca->votes_on);
+	debugfs_create_u64("votes_off", mode, ibs_dir, &qca->votes_off);
+	debugfs_create_u32("vote_on_ms", mode, ibs_dir, &qca->vote_on_ms);
+	debugfs_create_u32("vote_off_ms", mode, ibs_dir, &qca->vote_off_ms);
+
+	/* read/write */
+	mode = 0644;
+	debugfs_create_u32("wake_retrans", mode, ibs_dir, &qca->wake_retrans);
+	debugfs_create_u32("tx_idle_delay", mode, ibs_dir,
+			   &qca->tx_idle_delay);
+}
+
+/* Flush protocol data */
+static int qca_flush(struct hci_uart *hu)
+{
+	struct qca_data *qca = hu->priv;
+
+	BT_DBG("hu %p qca flush", hu);
+
+	skb_queue_purge(&qca->tx_wait_q);
+	skb_queue_purge(&qca->txq);
+
+	return 0;
+}
+
+/* Close protocol */
+static int qca_close(struct hci_uart *hu)
+{
+	struct qca_data *qca = hu->priv;
+
+	BT_DBG("hu %p qca close", hu);
+
+	serial_clock_vote(HCI_IBS_VOTE_STATS_UPDATE, hu);
+
+	skb_queue_purge(&qca->tx_wait_q);
+	skb_queue_purge(&qca->txq);
+	skb_queue_purge(&qca->rx_memdump_q);
+	destroy_workqueue(qca->workqueue);
+	del_timer_sync(&qca->tx_idle_timer);
+	del_timer_sync(&qca->wake_retrans_timer);
+	qca->hu = NULL;
+
+	kfree_skb(qca->rx_skb);
+
+	hu->priv = NULL;
+
+	kfree(qca);
+
+	return 0;
+}
+
+/* Called upon a wake-up-indication from the device.
+ */
+static void device_want_to_wakeup(struct hci_uart *hu)
+{
+	unsigned long flags;
+	struct qca_data *qca = hu->priv;
+
+	BT_DBG("hu %p want to wake up", hu);
+
+	spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+	qca->ibs_recv_wakes++;
+
+	/* Don't wake the rx up when suspending. */
+	if (test_bit(QCA_SUSPENDING, &qca->flags)) {
+		spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+		return;
+	}
+
+	switch (qca->rx_ibs_state) {
+	case HCI_IBS_RX_ASLEEP:
+		/* Make sure clock is on - we may have turned clock off since
+		 * receiving the wake up indicator awake rx clock.
+		 */
+		queue_work(qca->workqueue, &qca->ws_awake_rx);
+		spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+		return;
+
+	case HCI_IBS_RX_AWAKE:
+		/* Always acknowledge device wake up,
+		 * sending IBS message doesn't count as TX ON.
+		 */
+		if (send_hci_ibs_cmd(HCI_IBS_WAKE_ACK, hu) < 0) {
+			BT_ERR("Failed to acknowledge device wake up");
+			break;
+		}
+		qca->ibs_sent_wacks++;
+		break;
+
+	default:
+		/* Any other state is illegal */
+		BT_ERR("Received HCI_IBS_WAKE_IND in rx state %d",
+		       qca->rx_ibs_state);
+		break;
+	}
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+	/* Actually send the packets */
+	hci_uart_tx_wakeup(hu);
+}
+
+/* Called upon a sleep-indication from the device.
+ */
+static void device_want_to_sleep(struct hci_uart *hu)
+{
+	unsigned long flags;
+	struct qca_data *qca = hu->priv;
+
+	BT_DBG("hu %p want to sleep in %d state", hu, qca->rx_ibs_state);
+
+	spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+	qca->ibs_recv_slps++;
+
+	switch (qca->rx_ibs_state) {
+	case HCI_IBS_RX_AWAKE:
+		/* Update state */
+		qca->rx_ibs_state = HCI_IBS_RX_ASLEEP;
+		/* Vote off rx clock under workqueue */
+		queue_work(qca->workqueue, &qca->ws_rx_vote_off);
+		break;
+
+	case HCI_IBS_RX_ASLEEP:
+		break;
+
+	default:
+		/* Any other state is illegal */
+		BT_ERR("Received HCI_IBS_SLEEP_IND in rx state %d",
+		       qca->rx_ibs_state);
+		break;
+	}
+
+	wake_up_interruptible(&qca->suspend_wait_q);
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+}
+
+/* Called upon wake-up-acknowledgement from the device
+ */
+static void device_woke_up(struct hci_uart *hu)
+{
+	unsigned long flags, idle_delay;
+	struct qca_data *qca = hu->priv;
+	struct sk_buff *skb = NULL;
+
+	BT_DBG("hu %p woke up", hu);
+
+	spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+	qca->ibs_recv_wacks++;
+
+	/* Don't react to the wake-up-acknowledgment when suspending. */
+	if (test_bit(QCA_SUSPENDING, &qca->flags)) {
+		spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+		return;
+	}
+
+	switch (qca->tx_ibs_state) {
+	case HCI_IBS_TX_AWAKE:
+		/* Expect one if we send 2 WAKEs */
+		BT_DBG("Received HCI_IBS_WAKE_ACK in tx state %d",
+		       qca->tx_ibs_state);
+		break;
+
+	case HCI_IBS_TX_WAKING:
+		/* Send pending packets */
+		while ((skb = skb_dequeue(&qca->tx_wait_q)))
+			skb_queue_tail(&qca->txq, skb);
+
+		/* Switch timers and change state to HCI_IBS_TX_AWAKE */
+		del_timer(&qca->wake_retrans_timer);
+		idle_delay = msecs_to_jiffies(qca->tx_idle_delay);
+		mod_timer(&qca->tx_idle_timer, jiffies + idle_delay);
+		qca->tx_ibs_state = HCI_IBS_TX_AWAKE;
+		break;
+
+	case HCI_IBS_TX_ASLEEP:
+	default:
+		BT_ERR("Received HCI_IBS_WAKE_ACK in tx state %d",
+		       qca->tx_ibs_state);
+		break;
+	}
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+	/* Actually send the packets */
+	hci_uart_tx_wakeup(hu);
+}
+
+/* Enqueue frame for transmittion (padding, crc, etc) may be called from
+ * two simultaneous tasklets.
+ */
+static int qca_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	unsigned long flags = 0, idle_delay;
+	struct qca_data *qca = hu->priv;
+
+	BT_DBG("hu %p qca enq skb %p tx_ibs_state %d", hu, skb,
+	       qca->tx_ibs_state);
+
+	if (test_bit(QCA_SSR_TRIGGERED, &qca->flags)) {
+		/* As SSR is in progress, ignore the packets */
+		bt_dev_dbg(hu->hdev, "SSR is in progress");
+		kfree_skb(skb);
+		return 0;
+	}
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+
+	spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+
+	/* Don't go to sleep in middle of patch download or
+	 * Out-Of-Band(GPIOs control) sleep is selected.
+	 * Don't wake the device up when suspending.
+	 */
+	if (test_bit(QCA_IBS_DISABLED, &qca->flags) ||
+	    test_bit(QCA_SUSPENDING, &qca->flags)) {
+		skb_queue_tail(&qca->txq, skb);
+		spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+		return 0;
+	}
+
+	/* Act according to current state */
+	switch (qca->tx_ibs_state) {
+	case HCI_IBS_TX_AWAKE:
+		BT_DBG("Device awake, sending normally");
+		skb_queue_tail(&qca->txq, skb);
+		idle_delay = msecs_to_jiffies(qca->tx_idle_delay);
+		mod_timer(&qca->tx_idle_timer, jiffies + idle_delay);
+		break;
+
+	case HCI_IBS_TX_ASLEEP:
+		BT_DBG("Device asleep, waking up and queueing packet");
+		/* Save packet for later */
+		skb_queue_tail(&qca->tx_wait_q, skb);
+
+		qca->tx_ibs_state = HCI_IBS_TX_WAKING;
+		/* Schedule a work queue to wake up device */
+		queue_work(qca->workqueue, &qca->ws_awake_device);
+		break;
+
+	case HCI_IBS_TX_WAKING:
+		BT_DBG("Device waking up, queueing packet");
+		/* Transient state; just keep packet for later */
+		skb_queue_tail(&qca->tx_wait_q, skb);
+		break;
+
+	default:
+		BT_ERR("Illegal tx state: %d (losing packet)",
+		       qca->tx_ibs_state);
+		dev_kfree_skb_irq(skb);
+		break;
+	}
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+	return 0;
+}
+
+static int qca_ibs_sleep_ind(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+
+	BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_SLEEP_IND);
+
+	device_want_to_sleep(hu);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int qca_ibs_wake_ind(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+
+	BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_WAKE_IND);
+
+	device_want_to_wakeup(hu);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int qca_ibs_wake_ack(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+
+	BT_DBG("hu %p recv hci ibs cmd 0x%x", hu, HCI_IBS_WAKE_ACK);
+
+	device_woke_up(hu);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int qca_recv_acl_data(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	/* We receive debug logs from chip as an ACL packets.
+	 * Instead of sending the data to ACL to decode the
+	 * received data, we are pushing them to the above layers
+	 * as a diagnostic packet.
+	 */
+	if (get_unaligned_le16(skb->data) == QCA_DEBUG_HANDLE)
+		return hci_recv_diag(hdev, skb);
+
+	return hci_recv_frame(hdev, skb);
+}
+
+static void qca_controller_memdump(struct work_struct *work)
+{
+	struct qca_data *qca = container_of(work, struct qca_data,
+					    ctrl_memdump_evt);
+	struct hci_uart *hu = qca->hu;
+	struct sk_buff *skb;
+	struct qca_memdump_event_hdr *cmd_hdr;
+	struct qca_memdump_data *qca_memdump = qca->qca_memdump;
+	struct qca_dump_size *dump;
+	char *memdump_buf;
+	char nullBuff[QCA_DUMP_PACKET_SIZE] = { 0 };
+	u16 seq_no;
+	u32 dump_size;
+	u32 rx_size;
+	enum qca_btsoc_type soc_type = qca_soc_type(hu);
+
+	while ((skb = skb_dequeue(&qca->rx_memdump_q))) {
+
+		mutex_lock(&qca->hci_memdump_lock);
+		/* Skip processing the received packets if timeout detected
+		 * or memdump collection completed.
+		 */
+		if (qca->memdump_state == QCA_MEMDUMP_TIMEOUT ||
+		    qca->memdump_state == QCA_MEMDUMP_COLLECTED) {
+			mutex_unlock(&qca->hci_memdump_lock);
+			return;
+		}
+
+		if (!qca_memdump) {
+			qca_memdump = kzalloc(sizeof(struct qca_memdump_data),
+					      GFP_ATOMIC);
+			if (!qca_memdump) {
+				mutex_unlock(&qca->hci_memdump_lock);
+				return;
+			}
+
+			qca->qca_memdump = qca_memdump;
+		}
+
+		qca->memdump_state = QCA_MEMDUMP_COLLECTING;
+		cmd_hdr = (void *) skb->data;
+		seq_no = __le16_to_cpu(cmd_hdr->seq_no);
+		skb_pull(skb, sizeof(struct qca_memdump_event_hdr));
+
+		if (!seq_no) {
+
+			/* This is the first frame of memdump packet from
+			 * the controller, Disable IBS to recevie dump
+			 * with out any interruption, ideally time required for
+			 * the controller to send the dump is 8 seconds. let us
+			 * start timer to handle this asynchronous activity.
+			 */
+			set_bit(QCA_IBS_DISABLED, &qca->flags);
+			set_bit(QCA_MEMDUMP_COLLECTION, &qca->flags);
+			dump = (void *) skb->data;
+			dump_size = __le32_to_cpu(dump->dump_size);
+			if (!(dump_size)) {
+				bt_dev_err(hu->hdev, "Rx invalid memdump size");
+				kfree(qca_memdump);
+				kfree_skb(skb);
+				qca->qca_memdump = NULL;
+				mutex_unlock(&qca->hci_memdump_lock);
+				return;
+			}
+
+			bt_dev_info(hu->hdev, "QCA collecting dump of size:%u",
+				    dump_size);
+			queue_delayed_work(qca->workqueue,
+					   &qca->ctrl_memdump_timeout,
+					   msecs_to_jiffies(MEMDUMP_TIMEOUT_MS)
+					  );
+
+			skb_pull(skb, sizeof(dump_size));
+			memdump_buf = vmalloc(dump_size);
+			qca_memdump->ram_dump_size = dump_size;
+			qca_memdump->memdump_buf_head = memdump_buf;
+			qca_memdump->memdump_buf_tail = memdump_buf;
+		}
+
+		memdump_buf = qca_memdump->memdump_buf_tail;
+
+		/* If sequence no 0 is missed then there is no point in
+		 * accepting the other sequences.
+		 */
+		if (!memdump_buf) {
+			bt_dev_err(hu->hdev, "QCA: Discarding other packets");
+			kfree(qca_memdump);
+			kfree_skb(skb);
+			qca->qca_memdump = NULL;
+			mutex_unlock(&qca->hci_memdump_lock);
+			return;
+		}
+
+		/* There could be chance of missing some packets from
+		 * the controller. In such cases let us store the dummy
+		 * packets in the buffer.
+		 */
+		/* For QCA6390, controller does not lost packets but
+		 * sequence number field of packet sometimes has error
+		 * bits, so skip this checking for missing packet.
+		 */
+		while ((seq_no > qca_memdump->current_seq_no + 1) &&
+		       (soc_type != QCA_QCA6390) &&
+		       seq_no != QCA_LAST_SEQUENCE_NUM) {
+			bt_dev_err(hu->hdev, "QCA controller missed packet:%d",
+				   qca_memdump->current_seq_no);
+			rx_size = qca_memdump->received_dump;
+			rx_size += QCA_DUMP_PACKET_SIZE;
+			if (rx_size > qca_memdump->ram_dump_size) {
+				bt_dev_err(hu->hdev,
+					   "QCA memdump received %d, no space for missed packet",
+					   qca_memdump->received_dump);
+				break;
+			}
+			memcpy(memdump_buf, nullBuff, QCA_DUMP_PACKET_SIZE);
+			memdump_buf = memdump_buf + QCA_DUMP_PACKET_SIZE;
+			qca_memdump->received_dump += QCA_DUMP_PACKET_SIZE;
+			qca_memdump->current_seq_no++;
+		}
+
+		rx_size = qca_memdump->received_dump + skb->len;
+		if (rx_size <= qca_memdump->ram_dump_size) {
+			if ((seq_no != QCA_LAST_SEQUENCE_NUM) &&
+			    (seq_no != qca_memdump->current_seq_no))
+				bt_dev_err(hu->hdev,
+					   "QCA memdump unexpected packet %d",
+					   seq_no);
+			bt_dev_dbg(hu->hdev,
+				   "QCA memdump packet %d with length %d",
+				   seq_no, skb->len);
+			memcpy(memdump_buf, (unsigned char *)skb->data,
+			       skb->len);
+			memdump_buf = memdump_buf + skb->len;
+			qca_memdump->memdump_buf_tail = memdump_buf;
+			qca_memdump->current_seq_no = seq_no + 1;
+			qca_memdump->received_dump += skb->len;
+		} else {
+			bt_dev_err(hu->hdev,
+				   "QCA memdump received %d, no space for packet %d",
+				   qca_memdump->received_dump, seq_no);
+		}
+		qca->qca_memdump = qca_memdump;
+		kfree_skb(skb);
+		if (seq_no == QCA_LAST_SEQUENCE_NUM) {
+			bt_dev_info(hu->hdev,
+				    "QCA memdump Done, received %d, total %d",
+				    qca_memdump->received_dump,
+				    qca_memdump->ram_dump_size);
+			memdump_buf = qca_memdump->memdump_buf_head;
+			dev_coredumpv(&hu->serdev->dev, memdump_buf,
+				      qca_memdump->received_dump, GFP_KERNEL);
+			cancel_delayed_work(&qca->ctrl_memdump_timeout);
+			kfree(qca->qca_memdump);
+			qca->qca_memdump = NULL;
+			qca->memdump_state = QCA_MEMDUMP_COLLECTED;
+			clear_bit(QCA_MEMDUMP_COLLECTION, &qca->flags);
+		}
+
+		mutex_unlock(&qca->hci_memdump_lock);
+	}
+
+}
+
+static int qca_controller_memdump_event(struct hci_dev *hdev,
+					struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct qca_data *qca = hu->priv;
+
+	set_bit(QCA_SSR_TRIGGERED, &qca->flags);
+	skb_queue_tail(&qca->rx_memdump_q, skb);
+	queue_work(qca->workqueue, &qca->ctrl_memdump_evt);
+
+	return 0;
+}
+
+static int qca_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct qca_data *qca = hu->priv;
+
+	if (test_bit(QCA_DROP_VENDOR_EVENT, &qca->flags)) {
+		struct hci_event_hdr *hdr = (void *)skb->data;
+
+		/* For the WCN3990 the vendor command for a baudrate change
+		 * isn't sent as synchronous HCI command, because the
+		 * controller sends the corresponding vendor event with the
+		 * new baudrate. The event is received and properly decoded
+		 * after changing the baudrate of the host port. It needs to
+		 * be dropped, otherwise it can be misinterpreted as
+		 * response to a later firmware download command (also a
+		 * vendor command).
+		 */
+
+		if (hdr->evt == HCI_EV_VENDOR)
+			complete(&qca->drop_ev_comp);
+
+		kfree_skb(skb);
+
+		return 0;
+	}
+	/* We receive chip memory dump as an event packet, With a dedicated
+	 * handler followed by a hardware error event. When this event is
+	 * received we store dump into a file before closing hci. This
+	 * dump will help in triaging the issues.
+	 */
+	if ((skb->data[0] == HCI_VENDOR_PKT) &&
+	    (get_unaligned_be16(skb->data + 2) == QCA_SSR_DUMP_HANDLE))
+		return qca_controller_memdump_event(hdev, skb);
+
+	return hci_recv_frame(hdev, skb);
+}
+
+#define QCA_IBS_SLEEP_IND_EVENT \
+	.type = HCI_IBS_SLEEP_IND, \
+	.hlen = 0, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = HCI_MAX_IBS_SIZE
+
+#define QCA_IBS_WAKE_IND_EVENT \
+	.type = HCI_IBS_WAKE_IND, \
+	.hlen = 0, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = HCI_MAX_IBS_SIZE
+
+#define QCA_IBS_WAKE_ACK_EVENT \
+	.type = HCI_IBS_WAKE_ACK, \
+	.hlen = 0, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = HCI_MAX_IBS_SIZE
+
+static const struct h4_recv_pkt qca_recv_pkts[] = {
+	{ H4_RECV_ACL,             .recv = qca_recv_acl_data },
+	{ H4_RECV_SCO,             .recv = hci_recv_frame    },
+	{ H4_RECV_EVENT,           .recv = qca_recv_event    },
+	{ QCA_IBS_WAKE_IND_EVENT,  .recv = qca_ibs_wake_ind  },
+	{ QCA_IBS_WAKE_ACK_EVENT,  .recv = qca_ibs_wake_ack  },
+	{ QCA_IBS_SLEEP_IND_EVENT, .recv = qca_ibs_sleep_ind },
+};
+
+static int qca_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct qca_data *qca = hu->priv;
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	qca->rx_skb = h4_recv_buf(hu->hdev, qca->rx_skb, data, count,
+				  qca_recv_pkts, ARRAY_SIZE(qca_recv_pkts));
+	if (IS_ERR(qca->rx_skb)) {
+		int err = PTR_ERR(qca->rx_skb);
+		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+		qca->rx_skb = NULL;
+		return err;
+	}
+
+	return count;
+}
+
+static struct sk_buff *qca_dequeue(struct hci_uart *hu)
+{
+	struct qca_data *qca = hu->priv;
+
+	return skb_dequeue(&qca->txq);
+}
+
+static uint8_t qca_get_baudrate_value(int speed)
+{
+	switch (speed) {
+	case 9600:
+		return QCA_BAUDRATE_9600;
+	case 19200:
+		return QCA_BAUDRATE_19200;
+	case 38400:
+		return QCA_BAUDRATE_38400;
+	case 57600:
+		return QCA_BAUDRATE_57600;
+	case 115200:
+		return QCA_BAUDRATE_115200;
+	case 230400:
+		return QCA_BAUDRATE_230400;
+	case 460800:
+		return QCA_BAUDRATE_460800;
+	case 500000:
+		return QCA_BAUDRATE_500000;
+	case 921600:
+		return QCA_BAUDRATE_921600;
+	case 1000000:
+		return QCA_BAUDRATE_1000000;
+	case 2000000:
+		return QCA_BAUDRATE_2000000;
+	case 3000000:
+		return QCA_BAUDRATE_3000000;
+	case 3200000:
+		return QCA_BAUDRATE_3200000;
+	case 3500000:
+		return QCA_BAUDRATE_3500000;
+	default:
+		return QCA_BAUDRATE_115200;
+	}
+}
+
+static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct qca_data *qca = hu->priv;
+	struct sk_buff *skb;
+	u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 };
+
+	if (baudrate > QCA_BAUDRATE_3200000)
+		return -EINVAL;
+
+	cmd[4] = baudrate;
+
+	skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
+	if (!skb) {
+		bt_dev_err(hdev, "Failed to allocate baudrate packet");
+		return -ENOMEM;
+	}
+
+	/* Assign commands to change baudrate and packet type. */
+	skb_put_data(skb, cmd, sizeof(cmd));
+	hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
+
+	skb_queue_tail(&qca->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	/* Wait for the baudrate change request to be sent */
+
+	while (!skb_queue_empty(&qca->txq))
+		usleep_range(100, 200);
+
+	if (hu->serdev)
+		serdev_device_wait_until_sent(hu->serdev,
+		      msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
+
+	/* Give the controller time to process the request */
+	if (qca_is_wcn399x(qca_soc_type(hu)) ||
+	    qca_is_wcn6750(qca_soc_type(hu)))
+		usleep_range(1000, 10000);
+	else
+		msleep(300);
+
+	return 0;
+}
+
+static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+	if (hu->serdev)
+		serdev_device_set_baudrate(hu->serdev, speed);
+	else
+		hci_uart_set_baudrate(hu, speed);
+}
+
+static int qca_send_power_pulse(struct hci_uart *hu, bool on)
+{
+	int ret;
+	int timeout = msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS);
+	u8 cmd = on ? QCA_WCN3990_POWERON_PULSE : QCA_WCN3990_POWEROFF_PULSE;
+
+	/* These power pulses are single byte command which are sent
+	 * at required baudrate to wcn3990. On wcn3990, we have an external
+	 * circuit at Tx pin which decodes the pulse sent at specific baudrate.
+	 * For example, wcn3990 supports RF COEX antenna for both Wi-Fi/BT
+	 * and also we use the same power inputs to turn on and off for
+	 * Wi-Fi/BT. Powering up the power sources will not enable BT, until
+	 * we send a power on pulse at 115200 bps. This algorithm will help to
+	 * save power. Disabling hardware flow control is mandatory while
+	 * sending power pulses to SoC.
+	 */
+	bt_dev_dbg(hu->hdev, "sending power pulse %02x to controller", cmd);
+
+	serdev_device_write_flush(hu->serdev);
+	hci_uart_set_flow_control(hu, true);
+	ret = serdev_device_write_buf(hu->serdev, &cmd, sizeof(cmd));
+	if (ret < 0) {
+		bt_dev_err(hu->hdev, "failed to send power pulse %02x", cmd);
+		return ret;
+	}
+
+	serdev_device_wait_until_sent(hu->serdev, timeout);
+	hci_uart_set_flow_control(hu, false);
+
+	/* Give to controller time to boot/shutdown */
+	if (on)
+		msleep(100);
+	else
+		usleep_range(1000, 10000);
+
+	return 0;
+}
+
+static unsigned int qca_get_speed(struct hci_uart *hu,
+				  enum qca_speed_type speed_type)
+{
+	unsigned int speed = 0;
+
+	if (speed_type == QCA_INIT_SPEED) {
+		if (hu->init_speed)
+			speed = hu->init_speed;
+		else if (hu->proto->init_speed)
+			speed = hu->proto->init_speed;
+	} else {
+		if (hu->oper_speed)
+			speed = hu->oper_speed;
+		else if (hu->proto->oper_speed)
+			speed = hu->proto->oper_speed;
+	}
+
+	return speed;
+}
+
+static int qca_check_speeds(struct hci_uart *hu)
+{
+	if (qca_is_wcn399x(qca_soc_type(hu)) ||
+	    qca_is_wcn6750(qca_soc_type(hu))) {
+		if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
+		    !qca_get_speed(hu, QCA_OPER_SPEED))
+			return -EINVAL;
+	} else {
+		if (!qca_get_speed(hu, QCA_INIT_SPEED) ||
+		    !qca_get_speed(hu, QCA_OPER_SPEED))
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
+{
+	unsigned int speed, qca_baudrate;
+	struct qca_data *qca = hu->priv;
+	int ret = 0;
+
+	if (speed_type == QCA_INIT_SPEED) {
+		speed = qca_get_speed(hu, QCA_INIT_SPEED);
+		if (speed)
+			host_set_baudrate(hu, speed);
+	} else {
+		enum qca_btsoc_type soc_type = qca_soc_type(hu);
+
+		speed = qca_get_speed(hu, QCA_OPER_SPEED);
+		if (!speed)
+			return 0;
+
+		/* Disable flow control for wcn3990 to deassert RTS while
+		 * changing the baudrate of chip and host.
+		 */
+		if (qca_is_wcn399x(soc_type) ||
+		    qca_is_wcn6750(soc_type))
+			hci_uart_set_flow_control(hu, true);
+
+		if (soc_type == QCA_WCN3990) {
+			reinit_completion(&qca->drop_ev_comp);
+			set_bit(QCA_DROP_VENDOR_EVENT, &qca->flags);
+		}
+
+		qca_baudrate = qca_get_baudrate_value(speed);
+		bt_dev_dbg(hu->hdev, "Set UART speed to %d", speed);
+		ret = qca_set_baudrate(hu->hdev, qca_baudrate);
+		if (ret)
+			goto error;
+
+		host_set_baudrate(hu, speed);
+
+error:
+		if (qca_is_wcn399x(soc_type) ||
+		    qca_is_wcn6750(soc_type))
+			hci_uart_set_flow_control(hu, false);
+
+		if (soc_type == QCA_WCN3990) {
+			/* Wait for the controller to send the vendor event
+			 * for the baudrate change command.
+			 */
+			if (!wait_for_completion_timeout(&qca->drop_ev_comp,
+						 msecs_to_jiffies(100))) {
+				bt_dev_err(hu->hdev,
+					   "Failed to change controller baudrate\n");
+				ret = -ETIMEDOUT;
+			}
+
+			clear_bit(QCA_DROP_VENDOR_EVENT, &qca->flags);
+		}
+	}
+
+	return ret;
+}
+
+static int qca_send_crashbuffer(struct hci_uart *hu)
+{
+	struct qca_data *qca = hu->priv;
+	struct sk_buff *skb;
+
+	skb = bt_skb_alloc(QCA_CRASHBYTE_PACKET_LEN, GFP_KERNEL);
+	if (!skb) {
+		bt_dev_err(hu->hdev, "Failed to allocate memory for skb packet");
+		return -ENOMEM;
+	}
+
+	/* We forcefully crash the controller, by sending 0xfb byte for
+	 * 1024 times. We also might have chance of losing data, To be
+	 * on safer side we send 1096 bytes to the SoC.
+	 */
+	memset(skb_put(skb, QCA_CRASHBYTE_PACKET_LEN), QCA_MEMDUMP_BYTE,
+	       QCA_CRASHBYTE_PACKET_LEN);
+	hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
+	bt_dev_info(hu->hdev, "crash the soc to collect controller dump");
+	skb_queue_tail(&qca->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	return 0;
+}
+
+static void qca_wait_for_dump_collection(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct qca_data *qca = hu->priv;
+
+	wait_on_bit_timeout(&qca->flags, QCA_MEMDUMP_COLLECTION,
+			    TASK_UNINTERRUPTIBLE, MEMDUMP_TIMEOUT_MS);
+
+	clear_bit(QCA_MEMDUMP_COLLECTION, &qca->flags);
+}
+
+static void qca_hw_error(struct hci_dev *hdev, u8 code)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct qca_data *qca = hu->priv;
+
+	set_bit(QCA_SSR_TRIGGERED, &qca->flags);
+	set_bit(QCA_HW_ERROR_EVENT, &qca->flags);
+	bt_dev_info(hdev, "mem_dump_status: %d", qca->memdump_state);
+
+	if (qca->memdump_state == QCA_MEMDUMP_IDLE) {
+		/* If hardware error event received for other than QCA
+		 * soc memory dump event, then we need to crash the SOC
+		 * and wait here for 8 seconds to get the dump packets.
+		 * This will block main thread to be on hold until we
+		 * collect dump.
+		 */
+		set_bit(QCA_MEMDUMP_COLLECTION, &qca->flags);
+		qca_send_crashbuffer(hu);
+		qca_wait_for_dump_collection(hdev);
+	} else if (qca->memdump_state == QCA_MEMDUMP_COLLECTING) {
+		/* Let us wait here until memory dump collected or
+		 * memory dump timer expired.
+		 */
+		bt_dev_info(hdev, "waiting for dump to complete");
+		qca_wait_for_dump_collection(hdev);
+	}
+
+	mutex_lock(&qca->hci_memdump_lock);
+	if (qca->memdump_state != QCA_MEMDUMP_COLLECTED) {
+		bt_dev_err(hu->hdev, "clearing allocated memory due to memdump timeout");
+		if (qca->qca_memdump) {
+			vfree(qca->qca_memdump->memdump_buf_head);
+			kfree(qca->qca_memdump);
+			qca->qca_memdump = NULL;
+		}
+		qca->memdump_state = QCA_MEMDUMP_TIMEOUT;
+		cancel_delayed_work(&qca->ctrl_memdump_timeout);
+	}
+	mutex_unlock(&qca->hci_memdump_lock);
+
+	if (qca->memdump_state == QCA_MEMDUMP_TIMEOUT ||
+	    qca->memdump_state == QCA_MEMDUMP_COLLECTED) {
+		cancel_work_sync(&qca->ctrl_memdump_evt);
+		skb_queue_purge(&qca->rx_memdump_q);
+	}
+
+	clear_bit(QCA_HW_ERROR_EVENT, &qca->flags);
+}
+
+static void qca_cmd_timeout(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct qca_data *qca = hu->priv;
+
+	set_bit(QCA_SSR_TRIGGERED, &qca->flags);
+	if (qca->memdump_state == QCA_MEMDUMP_IDLE) {
+		set_bit(QCA_MEMDUMP_COLLECTION, &qca->flags);
+		qca_send_crashbuffer(hu);
+		qca_wait_for_dump_collection(hdev);
+	} else if (qca->memdump_state == QCA_MEMDUMP_COLLECTING) {
+		/* Let us wait here until memory dump collected or
+		 * memory dump timer expired.
+		 */
+		bt_dev_info(hdev, "waiting for dump to complete");
+		qca_wait_for_dump_collection(hdev);
+	}
+
+	mutex_lock(&qca->hci_memdump_lock);
+	if (qca->memdump_state != QCA_MEMDUMP_COLLECTED) {
+		qca->memdump_state = QCA_MEMDUMP_TIMEOUT;
+		if (!test_bit(QCA_HW_ERROR_EVENT, &qca->flags)) {
+			/* Inject hw error event to reset the device
+			 * and driver.
+			 */
+			hci_reset_dev(hu->hdev);
+		}
+	}
+	mutex_unlock(&qca->hci_memdump_lock);
+}
+
+static bool qca_wakeup(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	bool wakeup;
+
+	/* BT SoC attached through the serial bus is handled by the serdev driver.
+	 * So we need to use the device handle of the serdev driver to get the
+	 * status of device may wakeup.
+	 */
+	wakeup = device_may_wakeup(&hu->serdev->ctrl->dev);
+	bt_dev_dbg(hu->hdev, "wakeup status : %d", wakeup);
+
+	return wakeup;
+}
+
+static int qca_regulator_init(struct hci_uart *hu)
+{
+	enum qca_btsoc_type soc_type = qca_soc_type(hu);
+	struct qca_serdev *qcadev;
+	int ret;
+	bool sw_ctrl_state;
+
+	/* Check for vregs status, may be hci down has turned
+	 * off the voltage regulator.
+	 */
+	qcadev = serdev_device_get_drvdata(hu->serdev);
+	if (!qcadev->bt_power->vregs_on) {
+		serdev_device_close(hu->serdev);
+		ret = qca_regulator_enable(qcadev);
+		if (ret)
+			return ret;
+
+		ret = serdev_device_open(hu->serdev);
+		if (ret) {
+			bt_dev_err(hu->hdev, "failed to open port");
+			return ret;
+		}
+	}
+
+	if (qca_is_wcn399x(soc_type)) {
+		/* Forcefully enable wcn399x to enter in to boot mode. */
+		host_set_baudrate(hu, 2400);
+		ret = qca_send_power_pulse(hu, false);
+		if (ret)
+			return ret;
+	}
+
+	/* For wcn6750 need to enable gpio bt_en */
+	if (qcadev->bt_en) {
+		gpiod_set_value_cansleep(qcadev->bt_en, 0);
+		msleep(50);
+		gpiod_set_value_cansleep(qcadev->bt_en, 1);
+		msleep(50);
+		if (qcadev->sw_ctrl) {
+			sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
+			bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state);
+		}
+	}
+
+	qca_set_speed(hu, QCA_INIT_SPEED);
+
+	if (qca_is_wcn399x(soc_type)) {
+		ret = qca_send_power_pulse(hu, true);
+		if (ret)
+			return ret;
+	}
+
+	/* Now the device is in ready state to communicate with host.
+	 * To sync host with device we need to reopen port.
+	 * Without this, we will have RTS and CTS synchronization
+	 * issues.
+	 */
+	serdev_device_close(hu->serdev);
+	ret = serdev_device_open(hu->serdev);
+	if (ret) {
+		bt_dev_err(hu->hdev, "failed to open port");
+		return ret;
+	}
+
+	hci_uart_set_flow_control(hu, false);
+
+	return 0;
+}
+
+static int qca_power_on(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	enum qca_btsoc_type soc_type = qca_soc_type(hu);
+	struct qca_serdev *qcadev;
+	struct qca_data *qca = hu->priv;
+	int ret = 0;
+
+	/* Non-serdev device usually is powered by external power
+	 * and don't need additional action in driver for power on
+	 */
+	if (!hu->serdev)
+		return 0;
+
+	if (qca_is_wcn399x(soc_type) ||
+	    qca_is_wcn6750(soc_type)) {
+		ret = qca_regulator_init(hu);
+	} else {
+		qcadev = serdev_device_get_drvdata(hu->serdev);
+		if (qcadev->bt_en) {
+			gpiod_set_value_cansleep(qcadev->bt_en, 1);
+			/* Controller needs time to bootup. */
+			msleep(150);
+		}
+	}
+
+	clear_bit(QCA_BT_OFF, &qca->flags);
+	return ret;
+}
+
+static int qca_setup(struct hci_uart *hu)
+{
+	struct hci_dev *hdev = hu->hdev;
+	struct qca_data *qca = hu->priv;
+	unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
+	unsigned int retries = 0;
+	enum qca_btsoc_type soc_type = qca_soc_type(hu);
+	const char *firmware_name = qca_get_firmware_name(hu);
+	int ret;
+	struct qca_btsoc_version ver;
+
+	ret = qca_check_speeds(hu);
+	if (ret)
+		return ret;
+
+	clear_bit(QCA_ROM_FW, &qca->flags);
+	/* Patch downloading has to be done without IBS mode */
+	set_bit(QCA_IBS_DISABLED, &qca->flags);
+
+	/* Enable controller to do both LE scan and BR/EDR inquiry
+	 * simultaneously.
+	 */
+	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+
+	bt_dev_info(hdev, "setting up %s",
+		qca_is_wcn399x(soc_type) ? "wcn399x" :
+		(soc_type == QCA_WCN6750) ? "wcn6750" : "ROME/QCA6390");
+
+	qca->memdump_state = QCA_MEMDUMP_IDLE;
+
+retry:
+	ret = qca_power_on(hdev);
+	if (ret)
+		goto out;
+
+	clear_bit(QCA_SSR_TRIGGERED, &qca->flags);
+
+	if (qca_is_wcn399x(soc_type) ||
+	    qca_is_wcn6750(soc_type)) {
+		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
+		hci_set_aosp_capable(hdev);
+
+		ret = qca_read_soc_version(hdev, &ver, soc_type);
+		if (ret)
+			goto out;
+	} else {
+		qca_set_speed(hu, QCA_INIT_SPEED);
+	}
+
+	/* Setup user speed if needed */
+	speed = qca_get_speed(hu, QCA_OPER_SPEED);
+	if (speed) {
+		ret = qca_set_speed(hu, QCA_OPER_SPEED);
+		if (ret)
+			goto out;
+
+		qca_baudrate = qca_get_baudrate_value(speed);
+	}
+
+	if (!(qca_is_wcn399x(soc_type) ||
+	     qca_is_wcn6750(soc_type))) {
+		/* Get QCA version information */
+		ret = qca_read_soc_version(hdev, &ver, soc_type);
+		if (ret)
+			goto out;
+	}
+
+	/* Setup patch / NVM configurations */
+	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, ver,
+			firmware_name);
+	if (!ret) {
+		clear_bit(QCA_IBS_DISABLED, &qca->flags);
+		qca_debugfs_init(hdev);
+		hu->hdev->hw_error = qca_hw_error;
+		hu->hdev->cmd_timeout = qca_cmd_timeout;
+		hu->hdev->wakeup = qca_wakeup;
+	} else if (ret == -ENOENT) {
+		/* No patch/nvm-config found, run with original fw/config */
+		set_bit(QCA_ROM_FW, &qca->flags);
+		ret = 0;
+	} else if (ret == -EAGAIN) {
+		/*
+		 * Userspace firmware loader will return -EAGAIN in case no
+		 * patch/nvm-config is found, so run with original fw/config.
+		 */
+		set_bit(QCA_ROM_FW, &qca->flags);
+		ret = 0;
+	}
+
+out:
+	if (ret && retries < MAX_INIT_RETRIES) {
+		bt_dev_warn(hdev, "Retry BT power ON:%d", retries);
+		qca_power_shutdown(hu);
+		if (hu->serdev) {
+			serdev_device_close(hu->serdev);
+			ret = serdev_device_open(hu->serdev);
+			if (ret) {
+				bt_dev_err(hdev, "failed to open port");
+				return ret;
+			}
+		}
+		retries++;
+		goto retry;
+	}
+
+	/* Setup bdaddr */
+	if (soc_type == QCA_ROME)
+		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
+	else
+		hu->hdev->set_bdaddr = qca_set_bdaddr;
+
+	return ret;
+}
+
+static const struct hci_uart_proto qca_proto = {
+	.id		= HCI_UART_QCA,
+	.name		= "QCA",
+	.manufacturer	= 29,
+	.init_speed	= 115200,
+	.oper_speed	= 3000000,
+	.open		= qca_open,
+	.close		= qca_close,
+	.flush		= qca_flush,
+	.setup		= qca_setup,
+	.recv		= qca_recv,
+	.enqueue	= qca_enqueue,
+	.dequeue	= qca_dequeue,
+};
+
+static const struct qca_device_data qca_soc_data_wcn3990 = {
+	.soc_type = QCA_WCN3990,
+	.vregs = (struct qca_vreg []) {
+		{ "vddio", 15000  },
+		{ "vddxo", 80000  },
+		{ "vddrf", 300000 },
+		{ "vddch0", 450000 },
+	},
+	.num_vregs = 4,
+};
+
+static const struct qca_device_data qca_soc_data_wcn3991 = {
+	.soc_type = QCA_WCN3991,
+	.vregs = (struct qca_vreg []) {
+		{ "vddio", 15000  },
+		{ "vddxo", 80000  },
+		{ "vddrf", 300000 },
+		{ "vddch0", 450000 },
+	},
+	.num_vregs = 4,
+	.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
+};
+
+static const struct qca_device_data qca_soc_data_wcn3998 = {
+	.soc_type = QCA_WCN3998,
+	.vregs = (struct qca_vreg []) {
+		{ "vddio", 10000  },
+		{ "vddxo", 80000  },
+		{ "vddrf", 300000 },
+		{ "vddch0", 450000 },
+	},
+	.num_vregs = 4,
+};
+
+static const struct qca_device_data qca_soc_data_qca6390 = {
+	.soc_type = QCA_QCA6390,
+	.num_vregs = 0,
+};
+
+static const struct qca_device_data qca_soc_data_wcn6750 = {
+	.soc_type = QCA_WCN6750,
+	.vregs = (struct qca_vreg []) {
+		{ "vddio", 5000 },
+		{ "vddaon", 26000 },
+		{ "vddbtcxmx", 126000 },
+		{ "vddrfacmn", 12500 },
+		{ "vddrfa0p8", 102000 },
+		{ "vddrfa1p7", 302000 },
+		{ "vddrfa1p2", 257000 },
+		{ "vddrfa2p2", 1700000 },
+		{ "vddasd", 200 },
+	},
+	.num_vregs = 9,
+	.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
+};
+
+static void qca_power_shutdown(struct hci_uart *hu)
+{
+	struct qca_serdev *qcadev;
+	struct qca_data *qca = hu->priv;
+	unsigned long flags;
+	enum qca_btsoc_type soc_type = qca_soc_type(hu);
+	bool sw_ctrl_state;
+
+	/* From this point we go into power off state. But serial port is
+	 * still open, stop queueing the IBS data and flush all the buffered
+	 * data in skb's.
+	 */
+	spin_lock_irqsave(&qca->hci_ibs_lock, flags);
+	set_bit(QCA_IBS_DISABLED, &qca->flags);
+	qca_flush(hu);
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+	/* Non-serdev device usually is powered by external power
+	 * and don't need additional action in driver for power down
+	 */
+	if (!hu->serdev)
+		return;
+
+	qcadev = serdev_device_get_drvdata(hu->serdev);
+
+	if (qca_is_wcn399x(soc_type)) {
+		host_set_baudrate(hu, 2400);
+		qca_send_power_pulse(hu, false);
+		qca_regulator_disable(qcadev);
+	} else if (soc_type == QCA_WCN6750) {
+		gpiod_set_value_cansleep(qcadev->bt_en, 0);
+		msleep(100);
+		qca_regulator_disable(qcadev);
+		if (qcadev->sw_ctrl) {
+			sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
+			bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state);
+		}
+	} else if (qcadev->bt_en) {
+		gpiod_set_value_cansleep(qcadev->bt_en, 0);
+	}
+
+	set_bit(QCA_BT_OFF, &qca->flags);
+}
+
+static int qca_power_off(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct qca_data *qca = hu->priv;
+	enum qca_btsoc_type soc_type = qca_soc_type(hu);
+
+	hu->hdev->hw_error = NULL;
+	hu->hdev->cmd_timeout = NULL;
+
+	del_timer_sync(&qca->wake_retrans_timer);
+	del_timer_sync(&qca->tx_idle_timer);
+
+	/* Stop sending shutdown command if soc crashes. */
+	if (soc_type != QCA_ROME
+		&& qca->memdump_state == QCA_MEMDUMP_IDLE) {
+		qca_send_pre_shutdown_cmd(hdev);
+		usleep_range(8000, 10000);
+	}
+
+	qca_power_shutdown(hu);
+	return 0;
+}
+
+static int qca_regulator_enable(struct qca_serdev *qcadev)
+{
+	struct qca_power *power = qcadev->bt_power;
+	int ret;
+
+	/* Already enabled */
+	if (power->vregs_on)
+		return 0;
+
+	BT_DBG("enabling %d regulators)", power->num_vregs);
+
+	ret = regulator_bulk_enable(power->num_vregs, power->vreg_bulk);
+	if (ret)
+		return ret;
+
+	power->vregs_on = true;
+
+	ret = clk_prepare_enable(qcadev->susclk);
+	if (ret)
+		qca_regulator_disable(qcadev);
+
+	return ret;
+}
+
+static void qca_regulator_disable(struct qca_serdev *qcadev)
+{
+	struct qca_power *power;
+
+	if (!qcadev)
+		return;
+
+	power = qcadev->bt_power;
+
+	/* Already disabled? */
+	if (!power->vregs_on)
+		return;
+
+	regulator_bulk_disable(power->num_vregs, power->vreg_bulk);
+	power->vregs_on = false;
+
+	clk_disable_unprepare(qcadev->susclk);
+}
+
+static int qca_init_regulators(struct qca_power *qca,
+				const struct qca_vreg *vregs, size_t num_vregs)
+{
+	struct regulator_bulk_data *bulk;
+	int ret;
+	int i;
+
+	bulk = devm_kcalloc(qca->dev, num_vregs, sizeof(*bulk), GFP_KERNEL);
+	if (!bulk)
+		return -ENOMEM;
+
+	for (i = 0; i < num_vregs; i++)
+		bulk[i].supply = vregs[i].name;
+
+	ret = devm_regulator_bulk_get(qca->dev, num_vregs, bulk);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < num_vregs; i++) {
+		ret = regulator_set_load(bulk[i].consumer, vregs[i].load_uA);
+		if (ret)
+			return ret;
+	}
+
+	qca->vreg_bulk = bulk;
+	qca->num_vregs = num_vregs;
+
+	return 0;
+}
+
+static int qca_serdev_probe(struct serdev_device *serdev)
+{
+	struct qca_serdev *qcadev;
+	struct hci_dev *hdev;
+	const struct qca_device_data *data;
+	int err;
+	bool power_ctrl_enabled = true;
+
+	qcadev = devm_kzalloc(&serdev->dev, sizeof(*qcadev), GFP_KERNEL);
+	if (!qcadev)
+		return -ENOMEM;
+
+	qcadev->serdev_hu.serdev = serdev;
+	data = device_get_match_data(&serdev->dev);
+	serdev_device_set_drvdata(serdev, qcadev);
+	device_property_read_string(&serdev->dev, "firmware-name",
+					 &qcadev->firmware_name);
+	device_property_read_u32(&serdev->dev, "max-speed",
+				 &qcadev->oper_speed);
+	if (!qcadev->oper_speed)
+		BT_DBG("UART will pick default operating speed");
+
+	if (data &&
+	    (qca_is_wcn399x(data->soc_type) ||
+	    qca_is_wcn6750(data->soc_type))) {
+		qcadev->btsoc_type = data->soc_type;
+		qcadev->bt_power = devm_kzalloc(&serdev->dev,
+						sizeof(struct qca_power),
+						GFP_KERNEL);
+		if (!qcadev->bt_power)
+			return -ENOMEM;
+
+		qcadev->bt_power->dev = &serdev->dev;
+		err = qca_init_regulators(qcadev->bt_power, data->vregs,
+					  data->num_vregs);
+		if (err) {
+			BT_ERR("Failed to init regulators:%d", err);
+			return err;
+		}
+
+		qcadev->bt_power->vregs_on = false;
+
+		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
+					       GPIOD_OUT_LOW);
+		if (IS_ERR_OR_NULL(qcadev->bt_en) && data->soc_type == QCA_WCN6750) {
+			dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
+			power_ctrl_enabled = false;
+		}
+
+		qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
+					       GPIOD_IN);
+		if (IS_ERR_OR_NULL(qcadev->sw_ctrl) && data->soc_type == QCA_WCN6750)
+			dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
+
+		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
+		if (IS_ERR(qcadev->susclk)) {
+			dev_err(&serdev->dev, "failed to acquire clk\n");
+			return PTR_ERR(qcadev->susclk);
+		}
+
+		err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
+		if (err) {
+			BT_ERR("wcn3990 serdev registration failed");
+			return err;
+		}
+	} else {
+		if (data)
+			qcadev->btsoc_type = data->soc_type;
+		else
+			qcadev->btsoc_type = QCA_ROME;
+
+		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
+					       GPIOD_OUT_LOW);
+		if (IS_ERR_OR_NULL(qcadev->bt_en)) {
+			dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
+			power_ctrl_enabled = false;
+		}
+
+		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
+		if (IS_ERR(qcadev->susclk)) {
+			dev_warn(&serdev->dev, "failed to acquire clk\n");
+			return PTR_ERR(qcadev->susclk);
+		}
+		err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
+		if (err)
+			return err;
+
+		err = clk_prepare_enable(qcadev->susclk);
+		if (err)
+			return err;
+
+		err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
+		if (err) {
+			BT_ERR("Rome serdev registration failed");
+			clk_disable_unprepare(qcadev->susclk);
+			return err;
+		}
+	}
+
+	hdev = qcadev->serdev_hu.hdev;
+
+	if (power_ctrl_enabled) {
+		set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+		hdev->shutdown = qca_power_off;
+	}
+
+	if (data) {
+		/* Wideband speech support must be set per driver since it can't
+		 * be queried via hci. Same with the valid le states quirk.
+		 */
+		if (data->capabilities & QCA_CAP_WIDEBAND_SPEECH)
+			set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
+				&hdev->quirks);
+
+		if (data->capabilities & QCA_CAP_VALID_LE_STATES)
+			set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+	}
+
+	return 0;
+}
+
+static void qca_serdev_remove(struct serdev_device *serdev)
+{
+	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
+	struct qca_power *power = qcadev->bt_power;
+
+	if ((qca_is_wcn399x(qcadev->btsoc_type) ||
+	     qca_is_wcn6750(qcadev->btsoc_type)) &&
+	     power->vregs_on)
+		qca_power_shutdown(&qcadev->serdev_hu);
+	else if (qcadev->susclk)
+		clk_disable_unprepare(qcadev->susclk);
+
+	hci_uart_unregister_device(&qcadev->serdev_hu);
+}
+
+static void qca_serdev_shutdown(struct device *dev)
+{
+	int ret;
+	int timeout = msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS);
+	struct serdev_device *serdev = to_serdev_device(dev);
+	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
+	struct hci_uart *hu = &qcadev->serdev_hu;
+	struct hci_dev *hdev = hu->hdev;
+	struct qca_data *qca = hu->priv;
+	const u8 ibs_wake_cmd[] = { 0xFD };
+	const u8 edl_reset_soc_cmd[] = { 0x01, 0x00, 0xFC, 0x01, 0x05 };
+
+	if (qcadev->btsoc_type == QCA_QCA6390) {
+		if (test_bit(QCA_BT_OFF, &qca->flags) ||
+		    !test_bit(HCI_RUNNING, &hdev->flags))
+			return;
+
+		serdev_device_write_flush(serdev);
+		ret = serdev_device_write_buf(serdev, ibs_wake_cmd,
+					      sizeof(ibs_wake_cmd));
+		if (ret < 0) {
+			BT_ERR("QCA send IBS_WAKE_IND error: %d", ret);
+			return;
+		}
+		serdev_device_wait_until_sent(serdev, timeout);
+		usleep_range(8000, 10000);
+
+		serdev_device_write_flush(serdev);
+		ret = serdev_device_write_buf(serdev, edl_reset_soc_cmd,
+					      sizeof(edl_reset_soc_cmd));
+		if (ret < 0) {
+			BT_ERR("QCA send EDL_RESET_REQ error: %d", ret);
+			return;
+		}
+		serdev_device_wait_until_sent(serdev, timeout);
+		usleep_range(8000, 10000);
+	}
+}
+
+static int __maybe_unused qca_suspend(struct device *dev)
+{
+	struct serdev_device *serdev = to_serdev_device(dev);
+	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
+	struct hci_uart *hu = &qcadev->serdev_hu;
+	struct qca_data *qca = hu->priv;
+	unsigned long flags;
+	bool tx_pending = false;
+	int ret = 0;
+	u8 cmd;
+	u32 wait_timeout = 0;
+
+	set_bit(QCA_SUSPENDING, &qca->flags);
+
+	/* if BT SoC is running with default firmware then it does not
+	 * support in-band sleep
+	 */
+	if (test_bit(QCA_ROM_FW, &qca->flags))
+		return 0;
+
+	/* During SSR after memory dump collection, controller will be
+	 * powered off and then powered on.If controller is powered off
+	 * during SSR then we should wait until SSR is completed.
+	 */
+	if (test_bit(QCA_BT_OFF, &qca->flags) &&
+	    !test_bit(QCA_SSR_TRIGGERED, &qca->flags))
+		return 0;
+
+	if (test_bit(QCA_IBS_DISABLED, &qca->flags) ||
+	    test_bit(QCA_SSR_TRIGGERED, &qca->flags)) {
+		wait_timeout = test_bit(QCA_SSR_TRIGGERED, &qca->flags) ?
+					IBS_DISABLE_SSR_TIMEOUT_MS :
+					FW_DOWNLOAD_TIMEOUT_MS;
+
+		/* QCA_IBS_DISABLED flag is set to true, During FW download
+		 * and during memory dump collection. It is reset to false,
+		 * After FW download complete.
+		 */
+		wait_on_bit_timeout(&qca->flags, QCA_IBS_DISABLED,
+			    TASK_UNINTERRUPTIBLE, msecs_to_jiffies(wait_timeout));
+
+		if (test_bit(QCA_IBS_DISABLED, &qca->flags)) {
+			bt_dev_err(hu->hdev, "SSR or FW download time out");
+			ret = -ETIMEDOUT;
+			goto error;
+		}
+	}
+
+	cancel_work_sync(&qca->ws_awake_device);
+	cancel_work_sync(&qca->ws_awake_rx);
+
+	spin_lock_irqsave_nested(&qca->hci_ibs_lock,
+				 flags, SINGLE_DEPTH_NESTING);
+
+	switch (qca->tx_ibs_state) {
+	case HCI_IBS_TX_WAKING:
+		del_timer(&qca->wake_retrans_timer);
+		fallthrough;
+	case HCI_IBS_TX_AWAKE:
+		del_timer(&qca->tx_idle_timer);
+
+		serdev_device_write_flush(hu->serdev);
+		cmd = HCI_IBS_SLEEP_IND;
+		ret = serdev_device_write_buf(hu->serdev, &cmd, sizeof(cmd));
+
+		if (ret < 0) {
+			BT_ERR("Failed to send SLEEP to device");
+			break;
+		}
+
+		qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
+		qca->ibs_sent_slps++;
+		tx_pending = true;
+		break;
+
+	case HCI_IBS_TX_ASLEEP:
+		break;
+
+	default:
+		BT_ERR("Spurious tx state %d", qca->tx_ibs_state);
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
+
+	if (ret < 0)
+		goto error;
+
+	if (tx_pending) {
+		serdev_device_wait_until_sent(hu->serdev,
+					      msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
+		serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_OFF, hu);
+	}
+
+	/* Wait for HCI_IBS_SLEEP_IND sent by device to indicate its Tx is going
+	 * to sleep, so that the packet does not wake the system later.
+	 */
+	ret = wait_event_interruptible_timeout(qca->suspend_wait_q,
+			qca->rx_ibs_state == HCI_IBS_RX_ASLEEP,
+			msecs_to_jiffies(IBS_BTSOC_TX_IDLE_TIMEOUT_MS));
+	if (ret == 0) {
+		ret = -ETIMEDOUT;
+		goto error;
+	}
+
+	return 0;
+
+error:
+	clear_bit(QCA_SUSPENDING, &qca->flags);
+
+	return ret;
+}
+
+static int __maybe_unused qca_resume(struct device *dev)
+{
+	struct serdev_device *serdev = to_serdev_device(dev);
+	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
+	struct hci_uart *hu = &qcadev->serdev_hu;
+	struct qca_data *qca = hu->priv;
+
+	clear_bit(QCA_SUSPENDING, &qca->flags);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id qca_bluetooth_of_match[] = {
+	{ .compatible = "qcom,qca6174-bt" },
+	{ .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
+	{ .compatible = "qcom,qca9377-bt" },
+	{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
+	{ .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
+	{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
+	{ .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id qca_bluetooth_acpi_match[] = {
+	{ "QCOM6390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+	{ "DLA16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+	{ "DLB16390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+	{ "DLB26390", (kernel_ulong_t)&qca_soc_data_qca6390 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, qca_bluetooth_acpi_match);
+#endif
+
+
+static struct serdev_device_driver qca_serdev_driver = {
+	.probe = qca_serdev_probe,
+	.remove = qca_serdev_remove,
+	.driver = {
+		.name = "hci_uart_qca",
+		.of_match_table = of_match_ptr(qca_bluetooth_of_match),
+		.acpi_match_table = ACPI_PTR(qca_bluetooth_acpi_match),
+		.shutdown = qca_serdev_shutdown,
+		.pm = &qca_pm_ops,
+	},
+};
+
+int __init qca_init(void)
+{
+	serdev_device_driver_register(&qca_serdev_driver);
+
+	return hci_uart_register_proto(&qca_proto);
+}
+
+int __exit qca_deinit(void)
+{
+	serdev_device_driver_unregister(&qca_serdev_driver);
+
+	return hci_uart_unregister_proto(&qca_proto);
+}
diff --git a/drivers/bluetooth/hci_serdev.c b/drivers/bluetooth/hci_serdev.c
new file mode 100644
index 000000000..f16fd79bc
--- /dev/null
+++ b/drivers/bluetooth/hci_serdev.c
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Bluetooth HCI serdev driver lib
+ *
+ *  Copyright (C) 2017  Linaro, Ltd., Rob Herring <robh@kernel.org>
+ *
+ *  Based on hci_ldisc.c:
+ *
+ *  Copyright (C) 2000-2001  Qualcomm Incorporated
+ *  Copyright (C) 2002-2003  Maxim Krasnyansky <maxk@qualcomm.com>
+ *  Copyright (C) 2004-2005  Marcel Holtmann <marcel@holtmann.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/serdev.h>
+#include <linux/skbuff.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
+
+static inline void hci_uart_tx_complete(struct hci_uart *hu, int pkt_type)
+{
+	struct hci_dev *hdev = hu->hdev;
+
+	/* Update HCI stat counters */
+	switch (pkt_type) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+	}
+}
+
+static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
+{
+	struct sk_buff *skb = hu->tx_skb;
+
+	if (!skb) {
+		if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+			skb = hu->proto->dequeue(hu);
+	} else
+		hu->tx_skb = NULL;
+
+	return skb;
+}
+
+static void hci_uart_write_work(struct work_struct *work)
+{
+	struct hci_uart *hu = container_of(work, struct hci_uart, write_work);
+	struct serdev_device *serdev = hu->serdev;
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+
+	/* REVISIT:
+	 * should we cope with bad skbs or ->write() returning an error value?
+	 */
+	do {
+		clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
+
+		while ((skb = hci_uart_dequeue(hu))) {
+			int len;
+
+			len = serdev_device_write_buf(serdev,
+						      skb->data, skb->len);
+			hdev->stat.byte_tx += len;
+
+			skb_pull(skb, len);
+			if (skb->len) {
+				hu->tx_skb = skb;
+				break;
+			}
+
+			hci_uart_tx_complete(hu, hci_skb_pkt_type(skb));
+			kfree_skb(skb);
+		}
+
+		clear_bit(HCI_UART_SENDING, &hu->tx_state);
+	} while (test_bit(HCI_UART_TX_WAKEUP, &hu->tx_state));
+}
+
+/* ------- Interface to HCI layer ------ */
+
+/* Reset device */
+static int hci_uart_flush(struct hci_dev *hdev)
+{
+	struct hci_uart *hu  = hci_get_drvdata(hdev);
+
+	BT_DBG("hdev %p serdev %p", hdev, hu->serdev);
+
+	if (hu->tx_skb) {
+		kfree_skb(hu->tx_skb); hu->tx_skb = NULL;
+	}
+
+	/* Flush any pending characters in the driver and discipline. */
+	serdev_device_write_flush(hu->serdev);
+
+	if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		hu->proto->flush(hu);
+
+	return 0;
+}
+
+/* Initialize device */
+static int hci_uart_open(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	int err;
+
+	BT_DBG("%s %p", hdev->name, hdev);
+
+	/* When Quirk HCI_QUIRK_NON_PERSISTENT_SETUP is set by
+	 * driver, BT SoC is completely turned OFF during
+	 * BT OFF. Upon next BT ON UART port should be opened.
+	 */
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
+		err = serdev_device_open(hu->serdev);
+		if (err)
+			return err;
+		set_bit(HCI_UART_PROTO_READY, &hu->flags);
+	}
+
+	/* Undo clearing this from hci_uart_close() */
+	hdev->flush = hci_uart_flush;
+
+	return 0;
+}
+
+/* Close device */
+static int hci_uart_close(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+
+	BT_DBG("hdev %p", hdev);
+
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		return 0;
+
+	hci_uart_flush(hdev);
+	hdev->flush = NULL;
+
+	/* When QUIRK HCI_QUIRK_NON_PERSISTENT_SETUP is set by driver,
+	 * BT SOC is completely powered OFF during BT OFF, holding port
+	 * open may drain the battery.
+	 */
+	if (test_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks)) {
+		clear_bit(HCI_UART_PROTO_READY, &hu->flags);
+		serdev_device_close(hu->serdev);
+	}
+
+	return 0;
+}
+
+/* Send frames from HCI layer */
+static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+
+	BT_DBG("%s: type %d len %d", hdev->name, hci_skb_pkt_type(skb),
+	       skb->len);
+
+	hu->proto->enqueue(hu, skb);
+
+	hci_uart_tx_wakeup(hu);
+
+	return 0;
+}
+
+static int hci_uart_setup(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct hci_rp_read_local_version *ver;
+	struct sk_buff *skb;
+	unsigned int speed;
+	int err;
+
+	/* Init speed if any */
+	if (hu->init_speed)
+		speed = hu->init_speed;
+	else if (hu->proto->init_speed)
+		speed = hu->proto->init_speed;
+	else
+		speed = 0;
+
+	if (speed)
+		serdev_device_set_baudrate(hu->serdev, speed);
+
+	/* Operational speed if any */
+	if (hu->oper_speed)
+		speed = hu->oper_speed;
+	else if (hu->proto->oper_speed)
+		speed = hu->proto->oper_speed;
+	else
+		speed = 0;
+
+	if (hu->proto->set_baudrate && speed) {
+		err = hu->proto->set_baudrate(hu, speed);
+		if (err)
+			bt_dev_err(hdev, "Failed to set baudrate");
+		else
+			serdev_device_set_baudrate(hu->serdev, speed);
+	}
+
+	if (hu->proto->setup)
+		return hu->proto->setup(hu);
+
+	if (!test_bit(HCI_UART_VND_DETECT, &hu->hdev_flags))
+		return 0;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		bt_dev_err(hdev, "Reading local version info failed (%ld)",
+			   PTR_ERR(skb));
+		return 0;
+	}
+
+	if (skb->len != sizeof(*ver))
+		bt_dev_err(hdev, "Event length mismatch for version info");
+
+	kfree_skb(skb);
+	return 0;
+}
+
+/* Check if the device is wakeable */
+static bool hci_uart_wakeup(struct hci_dev *hdev)
+{
+	/* HCI UART devices are assumed to be wakeable by default.
+	 * Implement wakeup callback to override this behavior.
+	 */
+	return true;
+}
+
+/** hci_uart_write_wakeup - transmit buffer wakeup
+ * @serdev: serial device
+ *
+ * This function is called by the serdev framework when it accepts
+ * more data being sent.
+ */
+static void hci_uart_write_wakeup(struct serdev_device *serdev)
+{
+	struct hci_uart *hu = serdev_device_get_drvdata(serdev);
+
+	BT_DBG("");
+
+	if (!hu || serdev != hu->serdev) {
+		WARN_ON(1);
+		return;
+	}
+
+	if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		hci_uart_tx_wakeup(hu);
+}
+
+/** hci_uart_receive_buf - receive buffer wakeup
+ * @serdev: serial device
+ * @data:   pointer to received data
+ * @count:  count of received data in bytes
+ *
+ * This function is called by the serdev framework when it received data
+ * in the RX buffer.
+ *
+ * Return: number of processed bytes
+ */
+static int hci_uart_receive_buf(struct serdev_device *serdev, const u8 *data,
+				   size_t count)
+{
+	struct hci_uart *hu = serdev_device_get_drvdata(serdev);
+
+	if (!hu || serdev != hu->serdev) {
+		WARN_ON(1);
+		return 0;
+	}
+
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		return 0;
+
+	/* It does not need a lock here as it is already protected by a mutex in
+	 * tty caller
+	 */
+	hu->proto->recv(hu, data, count);
+
+	if (hu->hdev)
+		hu->hdev->stat.byte_rx += count;
+
+	return count;
+}
+
+static const struct serdev_device_ops hci_serdev_client_ops = {
+	.receive_buf = hci_uart_receive_buf,
+	.write_wakeup = hci_uart_write_wakeup,
+};
+
+int hci_uart_register_device(struct hci_uart *hu,
+			     const struct hci_uart_proto *p)
+{
+	int err;
+	struct hci_dev *hdev;
+
+	BT_DBG("");
+
+	serdev_device_set_client_ops(hu->serdev, &hci_serdev_client_ops);
+
+	if (percpu_init_rwsem(&hu->proto_lock))
+		return -ENOMEM;
+
+	err = serdev_device_open(hu->serdev);
+	if (err)
+		goto err_rwsem;
+
+	err = p->open(hu);
+	if (err)
+		goto err_open;
+
+	hu->proto = p;
+	set_bit(HCI_UART_PROTO_READY, &hu->flags);
+
+	/* Initialize and register HCI device */
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Can't allocate HCI device");
+		err = -ENOMEM;
+		goto err_alloc;
+	}
+
+	hu->hdev = hdev;
+
+	hdev->bus = HCI_UART;
+	hci_set_drvdata(hdev, hu);
+
+	INIT_WORK(&hu->init_ready, hci_uart_init_work);
+	INIT_WORK(&hu->write_work, hci_uart_write_work);
+
+	/* Only when vendor specific setup callback is provided, consider
+	 * the manufacturer information valid. This avoids filling in the
+	 * value for Ericsson when nothing is specified.
+	 */
+	if (hu->proto->setup)
+		hdev->manufacturer = hu->proto->manufacturer;
+
+	hdev->open  = hci_uart_open;
+	hdev->close = hci_uart_close;
+	hdev->flush = hci_uart_flush;
+	hdev->send  = hci_uart_send_frame;
+	hdev->setup = hci_uart_setup;
+	if (!hdev->wakeup)
+		hdev->wakeup = hci_uart_wakeup;
+	SET_HCIDEV_DEV(hdev, &hu->serdev->dev);
+
+	if (test_bit(HCI_UART_NO_SUSPEND_NOTIFIER, &hu->flags))
+		set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks);
+
+	if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags))
+		set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+
+	if (test_bit(HCI_UART_EXT_CONFIG, &hu->hdev_flags))
+		set_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks);
+
+	if (test_bit(HCI_UART_CREATE_AMP, &hu->hdev_flags))
+		hdev->dev_type = HCI_AMP;
+	else
+		hdev->dev_type = HCI_PRIMARY;
+
+	if (test_bit(HCI_UART_INIT_PENDING, &hu->hdev_flags))
+		return 0;
+
+	if (hci_register_dev(hdev) < 0) {
+		BT_ERR("Can't register HCI device");
+		err = -ENODEV;
+		goto err_register;
+	}
+
+	set_bit(HCI_UART_REGISTERED, &hu->flags);
+
+	return 0;
+
+err_register:
+	hci_free_dev(hdev);
+err_alloc:
+	clear_bit(HCI_UART_PROTO_READY, &hu->flags);
+	p->close(hu);
+err_open:
+	serdev_device_close(hu->serdev);
+err_rwsem:
+	percpu_free_rwsem(&hu->proto_lock);
+	return err;
+}
+EXPORT_SYMBOL_GPL(hci_uart_register_device);
+
+void hci_uart_unregister_device(struct hci_uart *hu)
+{
+	struct hci_dev *hdev = hu->hdev;
+
+	cancel_work_sync(&hu->init_ready);
+	if (test_bit(HCI_UART_REGISTERED, &hu->flags))
+		hci_unregister_dev(hdev);
+	hci_free_dev(hdev);
+
+	cancel_work_sync(&hu->write_work);
+
+	hu->proto->close(hu);
+
+	if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
+		clear_bit(HCI_UART_PROTO_READY, &hu->flags);
+		serdev_device_close(hu->serdev);
+	}
+	percpu_free_rwsem(&hu->proto_lock);
+}
+EXPORT_SYMBOL_GPL(hci_uart_unregister_device);
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
new file mode 100644
index 000000000..fb4a2d0d8
--- /dev/null
+++ b/drivers/bluetooth/hci_uart.h
@@ -0,0 +1,202 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *
+ *  Bluetooth HCI UART driver
+ *
+ *  Copyright (C) 2000-2001  Qualcomm Incorporated
+ *  Copyright (C) 2002-2003  Maxim Krasnyansky <maxk@qualcomm.com>
+ *  Copyright (C) 2004-2005  Marcel Holtmann <marcel@holtmann.org>
+ */
+
+#ifndef N_HCI
+#define N_HCI	15
+#endif
+
+/* Ioctls */
+#define HCIUARTSETPROTO		_IOW('U', 200, int)
+#define HCIUARTGETPROTO		_IOR('U', 201, int)
+#define HCIUARTGETDEVICE	_IOR('U', 202, int)
+#define HCIUARTSETFLAGS		_IOW('U', 203, int)
+#define HCIUARTGETFLAGS		_IOR('U', 204, int)
+
+/* UART protocols */
+#define HCI_UART_MAX_PROTO	12
+
+#define HCI_UART_H4	0
+#define HCI_UART_BCSP	1
+#define HCI_UART_3WIRE	2
+#define HCI_UART_H4DS	3
+#define HCI_UART_LL	4
+#define HCI_UART_ATH3K	5
+#define HCI_UART_INTEL	6
+#define HCI_UART_BCM	7
+#define HCI_UART_QCA	8
+#define HCI_UART_AG6XX	9
+#define HCI_UART_NOKIA	10
+#define HCI_UART_MRVL	11
+
+#define HCI_UART_RAW_DEVICE	0
+#define HCI_UART_RESET_ON_INIT	1
+#define HCI_UART_CREATE_AMP	2
+#define HCI_UART_INIT_PENDING	3
+#define HCI_UART_EXT_CONFIG	4
+#define HCI_UART_VND_DETECT	5
+
+struct hci_uart;
+struct serdev_device;
+
+struct hci_uart_proto {
+	unsigned int id;
+	const char *name;
+	unsigned int manufacturer;
+	unsigned int init_speed;
+	unsigned int oper_speed;
+	int (*open)(struct hci_uart *hu);
+	int (*close)(struct hci_uart *hu);
+	int (*flush)(struct hci_uart *hu);
+	int (*setup)(struct hci_uart *hu);
+	int (*set_baudrate)(struct hci_uart *hu, unsigned int speed);
+	int (*recv)(struct hci_uart *hu, const void *data, int len);
+	int (*enqueue)(struct hci_uart *hu, struct sk_buff *skb);
+	struct sk_buff *(*dequeue)(struct hci_uart *hu);
+};
+
+struct hci_uart {
+	struct tty_struct	*tty;
+	struct serdev_device	*serdev;
+	struct hci_dev		*hdev;
+	unsigned long		flags;
+	unsigned long		hdev_flags;
+
+	struct work_struct	init_ready;
+	struct work_struct	write_work;
+
+	const struct hci_uart_proto *proto;
+	struct percpu_rw_semaphore proto_lock;	/* Stop work for proto close */
+	void			*priv;
+
+	struct sk_buff		*tx_skb;
+	unsigned long		tx_state;
+
+	unsigned int init_speed;
+	unsigned int oper_speed;
+
+	u8			alignment;
+	u8			padding;
+};
+
+/* HCI_UART proto flag bits */
+#define HCI_UART_PROTO_SET		0
+#define HCI_UART_REGISTERED		1
+#define HCI_UART_PROTO_READY		2
+#define HCI_UART_NO_SUSPEND_NOTIFIER	3
+
+/* TX states  */
+#define HCI_UART_SENDING	1
+#define HCI_UART_TX_WAKEUP	2
+
+int hci_uart_register_proto(const struct hci_uart_proto *p);
+int hci_uart_unregister_proto(const struct hci_uart_proto *p);
+int hci_uart_register_device(struct hci_uart *hu, const struct hci_uart_proto *p);
+void hci_uart_unregister_device(struct hci_uart *hu);
+
+int hci_uart_tx_wakeup(struct hci_uart *hu);
+int hci_uart_wait_until_sent(struct hci_uart *hu);
+int hci_uart_init_ready(struct hci_uart *hu);
+void hci_uart_init_work(struct work_struct *work);
+void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed);
+bool hci_uart_has_flow_control(struct hci_uart *hu);
+void hci_uart_set_flow_control(struct hci_uart *hu, bool enable);
+void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
+			 unsigned int oper_speed);
+
+#ifdef CONFIG_BT_HCIUART_H4
+int h4_init(void);
+int h4_deinit(void);
+
+struct h4_recv_pkt {
+	u8  type;	/* Packet type */
+	u8  hlen;	/* Header length */
+	u8  loff;	/* Data length offset in header */
+	u8  lsize;	/* Data length field size */
+	u16 maxlen;	/* Max overall packet length */
+	int (*recv)(struct hci_dev *hdev, struct sk_buff *skb);
+};
+
+#define H4_RECV_ACL \
+	.type = HCI_ACLDATA_PKT, \
+	.hlen = HCI_ACL_HDR_SIZE, \
+	.loff = 2, \
+	.lsize = 2, \
+	.maxlen = HCI_MAX_FRAME_SIZE \
+
+#define H4_RECV_SCO \
+	.type = HCI_SCODATA_PKT, \
+	.hlen = HCI_SCO_HDR_SIZE, \
+	.loff = 2, \
+	.lsize = 1, \
+	.maxlen = HCI_MAX_SCO_SIZE
+
+#define H4_RECV_EVENT \
+	.type = HCI_EVENT_PKT, \
+	.hlen = HCI_EVENT_HDR_SIZE, \
+	.loff = 1, \
+	.lsize = 1, \
+	.maxlen = HCI_MAX_EVENT_SIZE
+
+#define H4_RECV_ISO \
+	.type = HCI_ISODATA_PKT, \
+	.hlen = HCI_ISO_HDR_SIZE, \
+	.loff = 2, \
+	.lsize = 2, \
+	.maxlen = HCI_MAX_FRAME_SIZE \
+
+struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
+			    const unsigned char *buffer, int count,
+			    const struct h4_recv_pkt *pkts, int pkts_count);
+#endif
+
+#ifdef CONFIG_BT_HCIUART_BCSP
+int bcsp_init(void);
+int bcsp_deinit(void);
+#endif
+
+#ifdef CONFIG_BT_HCIUART_LL
+int ll_init(void);
+int ll_deinit(void);
+#endif
+
+#ifdef CONFIG_BT_HCIUART_ATH3K
+int ath_init(void);
+int ath_deinit(void);
+#endif
+
+#ifdef CONFIG_BT_HCIUART_3WIRE
+int h5_init(void);
+int h5_deinit(void);
+#endif
+
+#ifdef CONFIG_BT_HCIUART_INTEL
+int intel_init(void);
+int intel_deinit(void);
+#endif
+
+#ifdef CONFIG_BT_HCIUART_BCM
+int bcm_init(void);
+int bcm_deinit(void);
+#endif
+
+#ifdef CONFIG_BT_HCIUART_QCA
+int qca_init(void);
+int qca_deinit(void);
+#endif
+
+#ifdef CONFIG_BT_HCIUART_AG6XX
+int ag6xx_init(void);
+int ag6xx_deinit(void);
+#endif
+
+#ifdef CONFIG_BT_HCIUART_MRVL
+int mrvl_init(void);
+int mrvl_deinit(void);
+#endif
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
new file mode 100644
index 000000000..44dc91555
--- /dev/null
+++ b/drivers/bluetooth/hci_vhci.c
@@ -0,0 +1,609 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Bluetooth virtual HCI driver
+ *
+ *  Copyright (C) 2000-2001  Qualcomm Incorporated
+ *  Copyright (C) 2002-2003  Maxim Krasnyansky <maxk@qualcomm.com>
+ *  Copyright (C) 2004-2006  Marcel Holtmann <marcel@holtmann.org>
+ */
+
+#include <linux/module.h>
+#include <asm/unaligned.h>
+
+#include <linux/atomic.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/poll.h>
+
+#include <linux/skbuff.h>
+#include <linux/miscdevice.h>
+#include <linux/debugfs.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#define VERSION "1.5"
+
+static bool amp;
+
+struct vhci_data {
+	struct hci_dev *hdev;
+
+	wait_queue_head_t read_wait;
+	struct sk_buff_head readq;
+
+	struct mutex open_mutex;
+	struct delayed_work open_timeout;
+	struct work_struct suspend_work;
+
+	bool suspended;
+	bool wakeup;
+	__u16 msft_opcode;
+	bool aosp_capable;
+	atomic_t initialized;
+};
+
+static int vhci_open_dev(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int vhci_close_dev(struct hci_dev *hdev)
+{
+	struct vhci_data *data = hci_get_drvdata(hdev);
+
+	skb_queue_purge(&data->readq);
+
+	return 0;
+}
+
+static int vhci_flush(struct hci_dev *hdev)
+{
+	struct vhci_data *data = hci_get_drvdata(hdev);
+
+	skb_queue_purge(&data->readq);
+
+	return 0;
+}
+
+static int vhci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct vhci_data *data = hci_get_drvdata(hdev);
+
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+
+	skb_queue_tail(&data->readq, skb);
+
+	if (atomic_read(&data->initialized))
+		wake_up_interruptible(&data->read_wait);
+	return 0;
+}
+
+static int vhci_get_data_path_id(struct hci_dev *hdev, u8 *data_path_id)
+{
+	*data_path_id = 0;
+	return 0;
+}
+
+static int vhci_get_codec_config_data(struct hci_dev *hdev, __u8 type,
+				      struct bt_codec *codec, __u8 *vnd_len,
+				      __u8 **vnd_data)
+{
+	if (type != ESCO_LINK)
+		return -EINVAL;
+
+	*vnd_len = 0;
+	*vnd_data = NULL;
+	return 0;
+}
+
+static bool vhci_wakeup(struct hci_dev *hdev)
+{
+	struct vhci_data *data = hci_get_drvdata(hdev);
+
+	return data->wakeup;
+}
+
+static ssize_t force_suspend_read(struct file *file, char __user *user_buf,
+				  size_t count, loff_t *ppos)
+{
+	struct vhci_data *data = file->private_data;
+	char buf[3];
+
+	buf[0] = data->suspended ? 'Y' : 'N';
+	buf[1] = '\n';
+	buf[2] = '\0';
+	return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
+}
+
+static void vhci_suspend_work(struct work_struct *work)
+{
+	struct vhci_data *data = container_of(work, struct vhci_data,
+					      suspend_work);
+
+	if (data->suspended)
+		hci_suspend_dev(data->hdev);
+	else
+		hci_resume_dev(data->hdev);
+}
+
+static ssize_t force_suspend_write(struct file *file,
+				   const char __user *user_buf,
+				   size_t count, loff_t *ppos)
+{
+	struct vhci_data *data = file->private_data;
+	bool enable;
+	int err;
+
+	err = kstrtobool_from_user(user_buf, count, &enable);
+	if (err)
+		return err;
+
+	if (data->suspended == enable)
+		return -EALREADY;
+
+	data->suspended = enable;
+
+	schedule_work(&data->suspend_work);
+
+	return count;
+}
+
+static const struct file_operations force_suspend_fops = {
+	.open		= simple_open,
+	.read		= force_suspend_read,
+	.write		= force_suspend_write,
+	.llseek		= default_llseek,
+};
+
+static ssize_t force_wakeup_read(struct file *file, char __user *user_buf,
+				 size_t count, loff_t *ppos)
+{
+	struct vhci_data *data = file->private_data;
+	char buf[3];
+
+	buf[0] = data->wakeup ? 'Y' : 'N';
+	buf[1] = '\n';
+	buf[2] = '\0';
+	return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
+}
+
+static ssize_t force_wakeup_write(struct file *file,
+				  const char __user *user_buf, size_t count,
+				  loff_t *ppos)
+{
+	struct vhci_data *data = file->private_data;
+	bool enable;
+	int err;
+
+	err = kstrtobool_from_user(user_buf, count, &enable);
+	if (err)
+		return err;
+
+	if (data->wakeup == enable)
+		return -EALREADY;
+
+	data->wakeup = enable;
+
+	return count;
+}
+
+static const struct file_operations force_wakeup_fops = {
+	.open		= simple_open,
+	.read		= force_wakeup_read,
+	.write		= force_wakeup_write,
+	.llseek		= default_llseek,
+};
+
+static int msft_opcode_set(void *data, u64 val)
+{
+	struct vhci_data *vhci = data;
+
+	if (val > 0xffff || hci_opcode_ogf(val) != 0x3f)
+		return -EINVAL;
+
+	if (vhci->msft_opcode)
+		return -EALREADY;
+
+	vhci->msft_opcode = val;
+
+	return 0;
+}
+
+static int msft_opcode_get(void *data, u64 *val)
+{
+	struct vhci_data *vhci = data;
+
+	*val = vhci->msft_opcode;
+
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(msft_opcode_fops, msft_opcode_get, msft_opcode_set,
+			 "%llu\n");
+
+static ssize_t aosp_capable_read(struct file *file, char __user *user_buf,
+				 size_t count, loff_t *ppos)
+{
+	struct vhci_data *vhci = file->private_data;
+	char buf[3];
+
+	buf[0] = vhci->aosp_capable ? 'Y' : 'N';
+	buf[1] = '\n';
+	buf[2] = '\0';
+	return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
+}
+
+static ssize_t aosp_capable_write(struct file *file,
+				  const char __user *user_buf, size_t count,
+				  loff_t *ppos)
+{
+	struct vhci_data *vhci = file->private_data;
+	bool enable;
+	int err;
+
+	err = kstrtobool_from_user(user_buf, count, &enable);
+	if (err)
+		return err;
+
+	if (!enable)
+		return -EINVAL;
+
+	if (vhci->aosp_capable)
+		return -EALREADY;
+
+	vhci->aosp_capable = enable;
+
+	return count;
+}
+
+static const struct file_operations aosp_capable_fops = {
+	.open		= simple_open,
+	.read		= aosp_capable_read,
+	.write		= aosp_capable_write,
+	.llseek		= default_llseek,
+};
+
+static int vhci_setup(struct hci_dev *hdev)
+{
+	struct vhci_data *vhci = hci_get_drvdata(hdev);
+
+	if (vhci->msft_opcode)
+		hci_set_msft_opcode(hdev, vhci->msft_opcode);
+
+	if (vhci->aosp_capable)
+		hci_set_aosp_capable(hdev);
+
+	return 0;
+}
+
+static int __vhci_create_device(struct vhci_data *data, __u8 opcode)
+{
+	struct hci_dev *hdev;
+	struct sk_buff *skb;
+	__u8 dev_type;
+
+	if (data->hdev)
+		return -EBADFD;
+
+	/* bits 0-1 are dev_type (Primary or AMP) */
+	dev_type = opcode & 0x03;
+
+	if (dev_type != HCI_PRIMARY && dev_type != HCI_AMP)
+		return -EINVAL;
+
+	/* bits 2-5 are reserved (must be zero) */
+	if (opcode & 0x3c)
+		return -EINVAL;
+
+	skb = bt_skb_alloc(4, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		kfree_skb(skb);
+		return -ENOMEM;
+	}
+
+	data->hdev = hdev;
+
+	hdev->bus = HCI_VIRTUAL;
+	hdev->dev_type = dev_type;
+	hci_set_drvdata(hdev, data);
+
+	hdev->open  = vhci_open_dev;
+	hdev->close = vhci_close_dev;
+	hdev->flush = vhci_flush;
+	hdev->send  = vhci_send_frame;
+	hdev->get_data_path_id = vhci_get_data_path_id;
+	hdev->get_codec_config_data = vhci_get_codec_config_data;
+	hdev->wakeup = vhci_wakeup;
+	hdev->setup = vhci_setup;
+	set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+
+	/* bit 6 is for external configuration */
+	if (opcode & 0x40)
+		set_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks);
+
+	/* bit 7 is for raw device */
+	if (opcode & 0x80)
+		set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+
+	set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+
+	if (hci_register_dev(hdev) < 0) {
+		BT_ERR("Can't register HCI device");
+		hci_free_dev(hdev);
+		data->hdev = NULL;
+		kfree_skb(skb);
+		return -EBUSY;
+	}
+
+	debugfs_create_file("force_suspend", 0644, hdev->debugfs, data,
+			    &force_suspend_fops);
+
+	debugfs_create_file("force_wakeup", 0644, hdev->debugfs, data,
+			    &force_wakeup_fops);
+
+	if (IS_ENABLED(CONFIG_BT_MSFTEXT))
+		debugfs_create_file("msft_opcode", 0644, hdev->debugfs, data,
+				    &msft_opcode_fops);
+
+	if (IS_ENABLED(CONFIG_BT_AOSPEXT))
+		debugfs_create_file("aosp_capable", 0644, hdev->debugfs, data,
+				    &aosp_capable_fops);
+
+	hci_skb_pkt_type(skb) = HCI_VENDOR_PKT;
+
+	skb_put_u8(skb, 0xff);
+	skb_put_u8(skb, opcode);
+	put_unaligned_le16(hdev->id, skb_put(skb, 2));
+	skb_queue_head(&data->readq, skb);
+	atomic_inc(&data->initialized);
+
+	wake_up_interruptible(&data->read_wait);
+	return 0;
+}
+
+static int vhci_create_device(struct vhci_data *data, __u8 opcode)
+{
+	int err;
+
+	mutex_lock(&data->open_mutex);
+	err = __vhci_create_device(data, opcode);
+	mutex_unlock(&data->open_mutex);
+
+	return err;
+}
+
+static inline ssize_t vhci_get_user(struct vhci_data *data,
+				    struct iov_iter *from)
+{
+	size_t len = iov_iter_count(from);
+	struct sk_buff *skb;
+	__u8 pkt_type, opcode;
+	int ret;
+
+	if (len < 2 || len > HCI_MAX_FRAME_SIZE)
+		return -EINVAL;
+
+	skb = bt_skb_alloc(len, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	if (!copy_from_iter_full(skb_put(skb, len), len, from)) {
+		kfree_skb(skb);
+		return -EFAULT;
+	}
+
+	pkt_type = *((__u8 *) skb->data);
+	skb_pull(skb, 1);
+
+	switch (pkt_type) {
+	case HCI_EVENT_PKT:
+	case HCI_ACLDATA_PKT:
+	case HCI_SCODATA_PKT:
+	case HCI_ISODATA_PKT:
+		if (!data->hdev) {
+			kfree_skb(skb);
+			return -ENODEV;
+		}
+
+		hci_skb_pkt_type(skb) = pkt_type;
+
+		ret = hci_recv_frame(data->hdev, skb);
+		break;
+
+	case HCI_VENDOR_PKT:
+		cancel_delayed_work_sync(&data->open_timeout);
+
+		opcode = *((__u8 *) skb->data);
+		skb_pull(skb, 1);
+
+		if (skb->len > 0) {
+			kfree_skb(skb);
+			return -EINVAL;
+		}
+
+		kfree_skb(skb);
+
+		ret = vhci_create_device(data, opcode);
+		break;
+
+	default:
+		kfree_skb(skb);
+		return -EINVAL;
+	}
+
+	return (ret < 0) ? ret : len;
+}
+
+static inline ssize_t vhci_put_user(struct vhci_data *data,
+				    struct sk_buff *skb,
+				    char __user *buf, int count)
+{
+	char __user *ptr = buf;
+	int len;
+
+	len = min_t(unsigned int, skb->len, count);
+
+	if (copy_to_user(ptr, skb->data, len))
+		return -EFAULT;
+
+	if (!data->hdev)
+		return len;
+
+	data->hdev->stat.byte_tx += len;
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		data->hdev->stat.cmd_tx++;
+		break;
+	case HCI_ACLDATA_PKT:
+		data->hdev->stat.acl_tx++;
+		break;
+	case HCI_SCODATA_PKT:
+		data->hdev->stat.sco_tx++;
+		break;
+	}
+
+	return len;
+}
+
+static ssize_t vhci_read(struct file *file,
+			 char __user *buf, size_t count, loff_t *pos)
+{
+	struct vhci_data *data = file->private_data;
+	struct sk_buff *skb;
+	ssize_t ret = 0;
+
+	while (count) {
+		skb = skb_dequeue(&data->readq);
+		if (skb) {
+			ret = vhci_put_user(data, skb, buf, count);
+			if (ret < 0)
+				skb_queue_head(&data->readq, skb);
+			else
+				kfree_skb(skb);
+			break;
+		}
+
+		if (file->f_flags & O_NONBLOCK) {
+			ret = -EAGAIN;
+			break;
+		}
+
+		ret = wait_event_interruptible(data->read_wait,
+					       !skb_queue_empty(&data->readq));
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+static ssize_t vhci_write(struct kiocb *iocb, struct iov_iter *from)
+{
+	struct file *file = iocb->ki_filp;
+	struct vhci_data *data = file->private_data;
+
+	return vhci_get_user(data, from);
+}
+
+static __poll_t vhci_poll(struct file *file, poll_table *wait)
+{
+	struct vhci_data *data = file->private_data;
+
+	poll_wait(file, &data->read_wait, wait);
+
+	if (!skb_queue_empty(&data->readq))
+		return EPOLLIN | EPOLLRDNORM;
+
+	return EPOLLOUT | EPOLLWRNORM;
+}
+
+static void vhci_open_timeout(struct work_struct *work)
+{
+	struct vhci_data *data = container_of(work, struct vhci_data,
+					      open_timeout.work);
+
+	vhci_create_device(data, amp ? HCI_AMP : HCI_PRIMARY);
+}
+
+static int vhci_open(struct inode *inode, struct file *file)
+{
+	struct vhci_data *data;
+
+	data = kzalloc(sizeof(struct vhci_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	skb_queue_head_init(&data->readq);
+	init_waitqueue_head(&data->read_wait);
+
+	mutex_init(&data->open_mutex);
+	INIT_DELAYED_WORK(&data->open_timeout, vhci_open_timeout);
+	INIT_WORK(&data->suspend_work, vhci_suspend_work);
+
+	file->private_data = data;
+	nonseekable_open(inode, file);
+
+	schedule_delayed_work(&data->open_timeout, msecs_to_jiffies(1000));
+
+	return 0;
+}
+
+static int vhci_release(struct inode *inode, struct file *file)
+{
+	struct vhci_data *data = file->private_data;
+	struct hci_dev *hdev;
+
+	cancel_delayed_work_sync(&data->open_timeout);
+	flush_work(&data->suspend_work);
+
+	hdev = data->hdev;
+
+	if (hdev) {
+		hci_unregister_dev(hdev);
+		hci_free_dev(hdev);
+	}
+
+	skb_queue_purge(&data->readq);
+	file->private_data = NULL;
+	kfree(data);
+
+	return 0;
+}
+
+static const struct file_operations vhci_fops = {
+	.owner		= THIS_MODULE,
+	.read		= vhci_read,
+	.write_iter	= vhci_write,
+	.poll		= vhci_poll,
+	.open		= vhci_open,
+	.release	= vhci_release,
+	.llseek		= no_llseek,
+};
+
+static struct miscdevice vhci_miscdev = {
+	.name	= "vhci",
+	.fops	= &vhci_fops,
+	.minor	= VHCI_MINOR,
+};
+module_misc_device(vhci_miscdev);
+
+module_param(amp, bool, 0644);
+MODULE_PARM_DESC(amp, "Create AMP controller device");
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Bluetooth virtual HCI driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("devname:vhci");
+MODULE_ALIAS_MISCDEV(VHCI_MINOR);
diff --git a/drivers/bluetooth/virtio_bt.c b/drivers/bluetooth/virtio_bt.c
new file mode 100644
index 000000000..fd281d439
--- /dev/null
+++ b/drivers/bluetooth/virtio_bt.c
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/module.h>
+#include <linux/virtio.h>
+#include <linux/virtio_config.h>
+#include <linux/skbuff.h>
+
+#include <uapi/linux/virtio_ids.h>
+#include <uapi/linux/virtio_bt.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#define VERSION "0.1"
+
+enum {
+	VIRTBT_VQ_TX,
+	VIRTBT_VQ_RX,
+	VIRTBT_NUM_VQS,
+};
+
+struct virtio_bluetooth {
+	struct virtio_device *vdev;
+	struct virtqueue *vqs[VIRTBT_NUM_VQS];
+	struct work_struct rx;
+	struct hci_dev *hdev;
+};
+
+static int virtbt_add_inbuf(struct virtio_bluetooth *vbt)
+{
+	struct virtqueue *vq = vbt->vqs[VIRTBT_VQ_RX];
+	struct scatterlist sg[1];
+	struct sk_buff *skb;
+	int err;
+
+	skb = alloc_skb(1000, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	sg_init_one(sg, skb->data, 1000);
+
+	err = virtqueue_add_inbuf(vq, sg, 1, skb, GFP_KERNEL);
+	if (err < 0) {
+		kfree_skb(skb);
+		return err;
+	}
+
+	return 0;
+}
+
+static int virtbt_open(struct hci_dev *hdev)
+{
+	struct virtio_bluetooth *vbt = hci_get_drvdata(hdev);
+
+	if (virtbt_add_inbuf(vbt) < 0)
+		return -EIO;
+
+	virtqueue_kick(vbt->vqs[VIRTBT_VQ_RX]);
+	return 0;
+}
+
+static int virtbt_close(struct hci_dev *hdev)
+{
+	struct virtio_bluetooth *vbt = hci_get_drvdata(hdev);
+	int i;
+
+	cancel_work_sync(&vbt->rx);
+
+	for (i = 0; i < ARRAY_SIZE(vbt->vqs); i++) {
+		struct virtqueue *vq = vbt->vqs[i];
+		struct sk_buff *skb;
+
+		while ((skb = virtqueue_detach_unused_buf(vq)))
+			kfree_skb(skb);
+	}
+
+	return 0;
+}
+
+static int virtbt_flush(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int virtbt_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct virtio_bluetooth *vbt = hci_get_drvdata(hdev);
+	struct scatterlist sg[1];
+	int err;
+
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+
+	sg_init_one(sg, skb->data, skb->len);
+	err = virtqueue_add_outbuf(vbt->vqs[VIRTBT_VQ_TX], sg, 1, skb,
+				   GFP_KERNEL);
+	if (err) {
+		kfree_skb(skb);
+		return err;
+	}
+
+	virtqueue_kick(vbt->vqs[VIRTBT_VQ_TX]);
+	return 0;
+}
+
+static int virtbt_setup_zephyr(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	/* Read Build Information */
+	skb = __hci_cmd_sync(hdev, 0xfc08, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
+
+	hci_set_fw_info(hdev, "%s", skb->data + 1);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int virtbt_set_bdaddr_zephyr(struct hci_dev *hdev,
+				    const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+
+	/* Write BD_ADDR */
+	skb = __hci_cmd_sync(hdev, 0xfc06, 6, bdaddr, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int virtbt_setup_intel(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	/* Intel Read Version */
+	skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int virtbt_set_bdaddr_intel(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+
+	/* Intel Write BD Address */
+	skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int virtbt_setup_realtek(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	/* Read ROM Version */
+	skb = __hci_cmd_sync(hdev, 0xfc6d, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	bt_dev_info(hdev, "ROM version %u", *((__u8 *) (skb->data + 1)));
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static int virtbt_shutdown_generic(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	/* Reset */
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	kfree_skb(skb);
+	return 0;
+}
+
+static void virtbt_rx_handle(struct virtio_bluetooth *vbt, struct sk_buff *skb)
+{
+	__u8 pkt_type;
+
+	pkt_type = *((__u8 *) skb->data);
+	skb_pull(skb, 1);
+
+	switch (pkt_type) {
+	case HCI_EVENT_PKT:
+	case HCI_ACLDATA_PKT:
+	case HCI_SCODATA_PKT:
+	case HCI_ISODATA_PKT:
+		hci_skb_pkt_type(skb) = pkt_type;
+		hci_recv_frame(vbt->hdev, skb);
+		break;
+	default:
+		kfree_skb(skb);
+		break;
+	}
+}
+
+static void virtbt_rx_work(struct work_struct *work)
+{
+	struct virtio_bluetooth *vbt = container_of(work,
+						    struct virtio_bluetooth, rx);
+	struct sk_buff *skb;
+	unsigned int len;
+
+	skb = virtqueue_get_buf(vbt->vqs[VIRTBT_VQ_RX], &len);
+	if (!skb)
+		return;
+
+	skb_put(skb, len);
+	virtbt_rx_handle(vbt, skb);
+
+	if (virtbt_add_inbuf(vbt) < 0)
+		return;
+
+	virtqueue_kick(vbt->vqs[VIRTBT_VQ_RX]);
+}
+
+static void virtbt_tx_done(struct virtqueue *vq)
+{
+	struct sk_buff *skb;
+	unsigned int len;
+
+	while ((skb = virtqueue_get_buf(vq, &len)))
+		kfree_skb(skb);
+}
+
+static void virtbt_rx_done(struct virtqueue *vq)
+{
+	struct virtio_bluetooth *vbt = vq->vdev->priv;
+
+	schedule_work(&vbt->rx);
+}
+
+static int virtbt_probe(struct virtio_device *vdev)
+{
+	vq_callback_t *callbacks[VIRTBT_NUM_VQS] = {
+		[VIRTBT_VQ_TX] = virtbt_tx_done,
+		[VIRTBT_VQ_RX] = virtbt_rx_done,
+	};
+	const char *names[VIRTBT_NUM_VQS] = {
+		[VIRTBT_VQ_TX] = "tx",
+		[VIRTBT_VQ_RX] = "rx",
+	};
+	struct virtio_bluetooth *vbt;
+	struct hci_dev *hdev;
+	int err;
+	__u8 type;
+
+	if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1))
+		return -ENODEV;
+
+	type = virtio_cread8(vdev, offsetof(struct virtio_bt_config, type));
+
+	switch (type) {
+	case VIRTIO_BT_CONFIG_TYPE_PRIMARY:
+	case VIRTIO_BT_CONFIG_TYPE_AMP:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	vbt = kzalloc(sizeof(*vbt), GFP_KERNEL);
+	if (!vbt)
+		return -ENOMEM;
+
+	vdev->priv = vbt;
+	vbt->vdev = vdev;
+
+	INIT_WORK(&vbt->rx, virtbt_rx_work);
+
+	err = virtio_find_vqs(vdev, VIRTBT_NUM_VQS, vbt->vqs, callbacks,
+			      names, NULL);
+	if (err)
+		return err;
+
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		err = -ENOMEM;
+		goto failed;
+	}
+
+	vbt->hdev = hdev;
+
+	hdev->bus = HCI_VIRTIO;
+	hdev->dev_type = type;
+	hci_set_drvdata(hdev, vbt);
+
+	hdev->open  = virtbt_open;
+	hdev->close = virtbt_close;
+	hdev->flush = virtbt_flush;
+	hdev->send  = virtbt_send_frame;
+
+	if (virtio_has_feature(vdev, VIRTIO_BT_F_VND_HCI)) {
+		__u16 vendor;
+
+		virtio_cread(vdev, struct virtio_bt_config, vendor, &vendor);
+
+		switch (vendor) {
+		case VIRTIO_BT_CONFIG_VENDOR_ZEPHYR:
+			hdev->manufacturer = 1521;
+			hdev->setup = virtbt_setup_zephyr;
+			hdev->shutdown = virtbt_shutdown_generic;
+			hdev->set_bdaddr = virtbt_set_bdaddr_zephyr;
+			break;
+
+		case VIRTIO_BT_CONFIG_VENDOR_INTEL:
+			hdev->manufacturer = 2;
+			hdev->setup = virtbt_setup_intel;
+			hdev->shutdown = virtbt_shutdown_generic;
+			hdev->set_bdaddr = virtbt_set_bdaddr_intel;
+			set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+			set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+			set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+			break;
+
+		case VIRTIO_BT_CONFIG_VENDOR_REALTEK:
+			hdev->manufacturer = 93;
+			hdev->setup = virtbt_setup_realtek;
+			hdev->shutdown = virtbt_shutdown_generic;
+			set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+			set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+			break;
+		}
+	}
+
+	if (virtio_has_feature(vdev, VIRTIO_BT_F_MSFT_EXT)) {
+		__u16 msft_opcode;
+
+		virtio_cread(vdev, struct virtio_bt_config,
+			     msft_opcode, &msft_opcode);
+
+		hci_set_msft_opcode(hdev, msft_opcode);
+	}
+
+	if (virtio_has_feature(vdev, VIRTIO_BT_F_AOSP_EXT))
+		hci_set_aosp_capable(hdev);
+
+	if (hci_register_dev(hdev) < 0) {
+		hci_free_dev(hdev);
+		err = -EBUSY;
+		goto failed;
+	}
+
+	return 0;
+
+failed:
+	vdev->config->del_vqs(vdev);
+	return err;
+}
+
+static void virtbt_remove(struct virtio_device *vdev)
+{
+	struct virtio_bluetooth *vbt = vdev->priv;
+	struct hci_dev *hdev = vbt->hdev;
+
+	hci_unregister_dev(hdev);
+	virtio_reset_device(vdev);
+
+	hci_free_dev(hdev);
+	vbt->hdev = NULL;
+
+	vdev->config->del_vqs(vdev);
+	kfree(vbt);
+}
+
+static struct virtio_device_id virtbt_table[] = {
+	{ VIRTIO_ID_BT, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
+MODULE_DEVICE_TABLE(virtio, virtbt_table);
+
+static const unsigned int virtbt_features[] = {
+	VIRTIO_BT_F_VND_HCI,
+	VIRTIO_BT_F_MSFT_EXT,
+	VIRTIO_BT_F_AOSP_EXT,
+};
+
+static struct virtio_driver virtbt_driver = {
+	.driver.name         = KBUILD_MODNAME,
+	.driver.owner        = THIS_MODULE,
+	.feature_table       = virtbt_features,
+	.feature_table_size  = ARRAY_SIZE(virtbt_features),
+	.id_table            = virtbt_table,
+	.probe               = virtbt_probe,
+	.remove              = virtbt_remove,
+};
+
+module_virtio_driver(virtbt_driver);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Generic Bluetooth VIRTIO driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");