Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 232 insertions, 0 deletions

diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c
new file mode 100644
index 000000000..975454a3d
--- /dev/null
+++ b/drivers/clk/rockchip/clk-mmc-phase.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2014 Google, Inc
+ * Author: Alexandru M Stan <amstan@chromium.org>
+ */
+
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include "clk.h"
+
+struct rockchip_mmc_clock {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	int		id;
+	int		shift;
+	int		cached_phase;
+	struct notifier_block clk_rate_change_nb;
+};
+
+#define to_mmc_clock(_hw) container_of(_hw, struct rockchip_mmc_clock, hw)
+
+#define RK3288_MMC_CLKGEN_DIV 2
+
+static unsigned long rockchip_mmc_recalc(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	return parent_rate / RK3288_MMC_CLKGEN_DIV;
+}
+
+#define ROCKCHIP_MMC_DELAY_SEL BIT(10)
+#define ROCKCHIP_MMC_DEGREE_MASK 0x3
+#define ROCKCHIP_MMC_DELAYNUM_OFFSET 2
+#define ROCKCHIP_MMC_DELAYNUM_MASK (0xff << ROCKCHIP_MMC_DELAYNUM_OFFSET)
+
+#define PSECS_PER_SEC 1000000000000LL
+
+/*
+ * Each fine delay is between 44ps-77ps. Assume each fine delay is 60ps to
+ * simplify calculations. So 45degs could be anywhere between 33deg and 57.8deg.
+ */
+#define ROCKCHIP_MMC_DELAY_ELEMENT_PSEC 60
+
+static int rockchip_mmc_get_phase(struct clk_hw *hw)
+{
+	struct rockchip_mmc_clock *mmc_clock = to_mmc_clock(hw);
+	unsigned long rate = clk_hw_get_rate(hw);
+	u32 raw_value;
+	u16 degrees;
+	u32 delay_num = 0;
+
+	/* Constant signal, no measurable phase shift */
+	if (!rate)
+		return 0;
+
+	raw_value = readl(mmc_clock->reg) >> (mmc_clock->shift);
+
+	degrees = (raw_value & ROCKCHIP_MMC_DEGREE_MASK) * 90;
+
+	if (raw_value & ROCKCHIP_MMC_DELAY_SEL) {
+		/* degrees/delaynum * 1000000 */
+		unsigned long factor = (ROCKCHIP_MMC_DELAY_ELEMENT_PSEC / 10) *
+					36 * (rate / 10000);
+
+		delay_num = (raw_value & ROCKCHIP_MMC_DELAYNUM_MASK);
+		delay_num >>= ROCKCHIP_MMC_DELAYNUM_OFFSET;
+		degrees += DIV_ROUND_CLOSEST(delay_num * factor, 1000000);
+	}
+
+	return degrees % 360;
+}
+
+static int rockchip_mmc_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct rockchip_mmc_clock *mmc_clock = to_mmc_clock(hw);
+	unsigned long rate = clk_hw_get_rate(hw);
+	u8 nineties, remainder;
+	u8 delay_num;
+	u32 raw_value;
+	u32 delay;
+
+	/*
+	 * The below calculation is based on the output clock from
+	 * MMC host to the card, which expects the phase clock inherits
+	 * the clock rate from its parent, namely the output clock
+	 * provider of MMC host. However, things may go wrong if
+	 * (1) It is orphan.
+	 * (2) It is assigned to the wrong parent.
+	 *
+	 * This check help debug the case (1), which seems to be the
+	 * most likely problem we often face and which makes it difficult
+	 * for people to debug unstable mmc tuning results.
+	 */
+	if (!rate) {
+		pr_err("%s: invalid clk rate\n", __func__);
+		return -EINVAL;
+	}
+
+	nineties = degrees / 90;
+	remainder = (degrees % 90);
+
+	/*
+	 * Due to the inexact nature of the "fine" delay, we might
+	 * actually go non-monotonic.  We don't go _too_ monotonic
+	 * though, so we should be OK.  Here are options of how we may
+	 * work:
+	 *
+	 * Ideally we end up with:
+	 *   1.0, 2.0, ..., 69.0, 70.0, ...,  89.0, 90.0
+	 *
+	 * On one extreme (if delay is actually 44ps):
+	 *   .73, 1.5, ..., 50.6, 51.3, ...,  65.3, 90.0
+	 * The other (if delay is actually 77ps):
+	 *   1.3, 2.6, ..., 88.6. 89.8, ..., 114.0, 90
+	 *
+	 * It's possible we might make a delay that is up to 25
+	 * degrees off from what we think we're making.  That's OK
+	 * though because we should be REALLY far from any bad range.
+	 */
+
+	/*
+	 * Convert to delay; do a little extra work to make sure we
+	 * don't overflow 32-bit / 64-bit numbers.
+	 */
+	delay = 10000000; /* PSECS_PER_SEC / 10000 / 10 */
+	delay *= remainder;
+	delay = DIV_ROUND_CLOSEST(delay,
+			(rate / 1000) * 36 *
+				(ROCKCHIP_MMC_DELAY_ELEMENT_PSEC / 10));
+
+	delay_num = (u8) min_t(u32, delay, 255);
+
+	raw_value = delay_num ? ROCKCHIP_MMC_DELAY_SEL : 0;
+	raw_value |= delay_num << ROCKCHIP_MMC_DELAYNUM_OFFSET;
+	raw_value |= nineties;
+	writel(HIWORD_UPDATE(raw_value, 0x07ff, mmc_clock->shift),
+	       mmc_clock->reg);
+
+	pr_debug("%s->set_phase(%d) delay_nums=%u reg[0x%p]=0x%03x actual_degrees=%d\n",
+		clk_hw_get_name(hw), degrees, delay_num,
+		mmc_clock->reg, raw_value>>(mmc_clock->shift),
+		rockchip_mmc_get_phase(hw)
+	);
+
+	return 0;
+}
+
+static const struct clk_ops rockchip_mmc_clk_ops = {
+	.recalc_rate	= rockchip_mmc_recalc,
+	.get_phase	= rockchip_mmc_get_phase,
+	.set_phase	= rockchip_mmc_set_phase,
+};
+
+#define to_rockchip_mmc_clock(x) \
+	container_of(x, struct rockchip_mmc_clock, clk_rate_change_nb)
+static int rockchip_mmc_clk_rate_notify(struct notifier_block *nb,
+					unsigned long event, void *data)
+{
+	struct rockchip_mmc_clock *mmc_clock = to_rockchip_mmc_clock(nb);
+	struct clk_notifier_data *ndata = data;
+
+	/*
+	 * rockchip_mmc_clk is mostly used by mmc controllers to sample
+	 * the intput data, which expects the fixed phase after the tuning
+	 * process. However if the clock rate is changed, the phase is stale
+	 * and may break the data sampling. So here we try to restore the phase
+	 * for that case, except that
+	 * (1) cached_phase is invaild since we inevitably cached it when the
+	 * clock provider be reparented from orphan to its real parent in the
+	 * first place. Otherwise we may mess up the initialization of MMC cards
+	 * since we only set the default sample phase and drive phase later on.
+	 * (2) the new coming rate is higher than the older one since mmc driver
+	 * set the max-frequency to match the boards' ability but we can't go
+	 * over the heads of that, otherwise the tests smoke out the issue.
+	 */
+	if (ndata->old_rate <= ndata->new_rate)
+		return NOTIFY_DONE;
+
+	if (event == PRE_RATE_CHANGE)
+		mmc_clock->cached_phase =
+			rockchip_mmc_get_phase(&mmc_clock->hw);
+	else if (mmc_clock->cached_phase != -EINVAL &&
+		 event == POST_RATE_CHANGE)
+		rockchip_mmc_set_phase(&mmc_clock->hw, mmc_clock->cached_phase);
+
+	return NOTIFY_DONE;
+}
+
+struct clk *rockchip_clk_register_mmc(const char *name,
+				const char *const *parent_names, u8 num_parents,
+				void __iomem *reg, int shift)
+{
+	struct clk_init_data init;
+	struct rockchip_mmc_clock *mmc_clock;
+	struct clk *clk;
+	int ret;
+
+	mmc_clock = kmalloc(sizeof(*mmc_clock), GFP_KERNEL);
+	if (!mmc_clock)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.flags = 0;
+	init.num_parents = num_parents;
+	init.parent_names = parent_names;
+	init.ops = &rockchip_mmc_clk_ops;
+
+	mmc_clock->hw.init = &init;
+	mmc_clock->reg = reg;
+	mmc_clock->shift = shift;
+
+	clk = clk_register(NULL, &mmc_clock->hw);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		goto err_register;
+	}
+
+	mmc_clock->clk_rate_change_nb.notifier_call =
+				&rockchip_mmc_clk_rate_notify;
+	ret = clk_notifier_register(clk, &mmc_clock->clk_rate_change_nb);
+	if (ret)
+		goto err_notifier;
+
+	return clk;
+err_notifier:
+	clk_unregister(clk);
+err_register:
+	kfree(mmc_clock);
+	return ERR_PTR(ret);
+}