Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 523 insertions, 0 deletions

diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
new file mode 100644
index 000000000..027e8f336
--- /dev/null
+++ b/drivers/devfreq/exynos-bus.c
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Generic Exynos Bus frequency driver with DEVFREQ Framework
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Author : Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This driver support Exynos Bus frequency feature by using
+ * DEVFREQ framework and is based on drivers/devfreq/exynos/exynos4_bus.c.
+ */
+
+#include <linux/clk.h>
+#include <linux/devfreq.h>
+#include <linux/devfreq-event.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define DEFAULT_SATURATION_RATIO	40
+
+struct exynos_bus {
+	struct device *dev;
+	struct platform_device *icc_pdev;
+
+	struct devfreq *devfreq;
+	struct devfreq_event_dev **edev;
+	unsigned int edev_count;
+	struct mutex lock;
+
+	unsigned long curr_freq;
+
+	int opp_token;
+	struct clk *clk;
+	unsigned int ratio;
+};
+
+/*
+ * Control the devfreq-event device to get the current state of bus
+ */
+#define exynos_bus_ops_edev(ops)				\
+static int exynos_bus_##ops(struct exynos_bus *bus)		\
+{								\
+	int i, ret;						\
+								\
+	for (i = 0; i < bus->edev_count; i++) {			\
+		if (!bus->edev[i])				\
+			continue;				\
+		ret = devfreq_event_##ops(bus->edev[i]);	\
+		if (ret < 0)					\
+			return ret;				\
+	}							\
+								\
+	return 0;						\
+}
+exynos_bus_ops_edev(enable_edev);
+exynos_bus_ops_edev(disable_edev);
+exynos_bus_ops_edev(set_event);
+
+static int exynos_bus_get_event(struct exynos_bus *bus,
+				struct devfreq_event_data *edata)
+{
+	struct devfreq_event_data event_data;
+	unsigned long load_count = 0, total_count = 0;
+	int i, ret = 0;
+
+	for (i = 0; i < bus->edev_count; i++) {
+		if (!bus->edev[i])
+			continue;
+
+		ret = devfreq_event_get_event(bus->edev[i], &event_data);
+		if (ret < 0)
+			return ret;
+
+		if (i == 0 || event_data.load_count > load_count) {
+			load_count = event_data.load_count;
+			total_count = event_data.total_count;
+		}
+	}
+
+	edata->load_count = load_count;
+	edata->total_count = total_count;
+
+	return ret;
+}
+
+/*
+ * devfreq function for both simple-ondemand and passive governor
+ */
+static int exynos_bus_target(struct device *dev, unsigned long *freq, u32 flags)
+{
+	struct exynos_bus *bus = dev_get_drvdata(dev);
+	struct dev_pm_opp *new_opp;
+	int ret = 0;
+
+	/* Get correct frequency for bus. */
+	new_opp = devfreq_recommended_opp(dev, freq, flags);
+	if (IS_ERR(new_opp)) {
+		dev_err(dev, "failed to get recommended opp instance\n");
+		return PTR_ERR(new_opp);
+	}
+
+	dev_pm_opp_put(new_opp);
+
+	/* Change voltage and frequency according to new OPP level */
+	mutex_lock(&bus->lock);
+	ret = dev_pm_opp_set_rate(dev, *freq);
+	if (!ret)
+		bus->curr_freq = *freq;
+
+	mutex_unlock(&bus->lock);
+
+	return ret;
+}
+
+static int exynos_bus_get_dev_status(struct device *dev,
+				     struct devfreq_dev_status *stat)
+{
+	struct exynos_bus *bus = dev_get_drvdata(dev);
+	struct devfreq_event_data edata;
+	int ret;
+
+	stat->current_frequency = bus->curr_freq;
+
+	ret = exynos_bus_get_event(bus, &edata);
+	if (ret < 0) {
+		dev_err(dev, "failed to get event from devfreq-event devices\n");
+		stat->total_time = stat->busy_time = 0;
+		goto err;
+	}
+
+	stat->busy_time = (edata.load_count * 100) / bus->ratio;
+	stat->total_time = edata.total_count;
+
+	dev_dbg(dev, "Usage of devfreq-event : %lu/%lu\n", stat->busy_time,
+							stat->total_time);
+
+err:
+	ret = exynos_bus_set_event(bus);
+	if (ret < 0) {
+		dev_err(dev, "failed to set event to devfreq-event devices\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static void exynos_bus_exit(struct device *dev)
+{
+	struct exynos_bus *bus = dev_get_drvdata(dev);
+	int ret;
+
+	ret = exynos_bus_disable_edev(bus);
+	if (ret < 0)
+		dev_warn(dev, "failed to disable the devfreq-event devices\n");
+
+	platform_device_unregister(bus->icc_pdev);
+
+	dev_pm_opp_of_remove_table(dev);
+	clk_disable_unprepare(bus->clk);
+	dev_pm_opp_put_regulators(bus->opp_token);
+}
+
+static void exynos_bus_passive_exit(struct device *dev)
+{
+	struct exynos_bus *bus = dev_get_drvdata(dev);
+
+	platform_device_unregister(bus->icc_pdev);
+
+	dev_pm_opp_of_remove_table(dev);
+	clk_disable_unprepare(bus->clk);
+}
+
+static int exynos_bus_parent_parse_of(struct device_node *np,
+					struct exynos_bus *bus)
+{
+	struct device *dev = bus->dev;
+	const char *supplies[] = { "vdd", NULL };
+	int i, ret, count, size;
+
+	ret = dev_pm_opp_set_regulators(dev, supplies);
+	if (ret < 0) {
+		dev_err(dev, "failed to set regulators %d\n", ret);
+		return ret;
+	}
+
+	bus->opp_token = ret;
+
+	/*
+	 * Get the devfreq-event devices to get the current utilization of
+	 * buses. This raw data will be used in devfreq ondemand governor.
+	 */
+	count = devfreq_event_get_edev_count(dev, "devfreq-events");
+	if (count < 0) {
+		dev_err(dev, "failed to get the count of devfreq-event dev\n");
+		ret = count;
+		goto err_regulator;
+	}
+	bus->edev_count = count;
+
+	size = sizeof(*bus->edev) * count;
+	bus->edev = devm_kzalloc(dev, size, GFP_KERNEL);
+	if (!bus->edev) {
+		ret = -ENOMEM;
+		goto err_regulator;
+	}
+
+	for (i = 0; i < count; i++) {
+		bus->edev[i] = devfreq_event_get_edev_by_phandle(dev,
+							"devfreq-events", i);
+		if (IS_ERR(bus->edev[i])) {
+			ret = -EPROBE_DEFER;
+			goto err_regulator;
+		}
+	}
+
+	/*
+	 * Optionally, Get the saturation ratio according to Exynos SoC
+	 * When measuring the utilization of each AXI bus with devfreq-event
+	 * devices, the measured real cycle might be much lower than the
+	 * total cycle of bus during sampling rate. In result, the devfreq
+	 * simple-ondemand governor might not decide to change the current
+	 * frequency due to too utilization (= real cycle/total cycle).
+	 * So, this property is used to adjust the utilization when calculating
+	 * the busy_time in exynos_bus_get_dev_status().
+	 */
+	if (of_property_read_u32(np, "exynos,saturation-ratio", &bus->ratio))
+		bus->ratio = DEFAULT_SATURATION_RATIO;
+
+	return 0;
+
+err_regulator:
+	dev_pm_opp_put_regulators(bus->opp_token);
+
+	return ret;
+}
+
+static int exynos_bus_parse_of(struct device_node *np,
+			      struct exynos_bus *bus)
+{
+	struct device *dev = bus->dev;
+	struct dev_pm_opp *opp;
+	unsigned long rate;
+	int ret;
+
+	/* Get the clock to provide each bus with source clock */
+	bus->clk = devm_clk_get(dev, "bus");
+	if (IS_ERR(bus->clk)) {
+		dev_err(dev, "failed to get bus clock\n");
+		return PTR_ERR(bus->clk);
+	}
+
+	ret = clk_prepare_enable(bus->clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to get enable clock\n");
+		return ret;
+	}
+
+	/* Get the freq and voltage from OPP table to scale the bus freq */
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret < 0) {
+		dev_err(dev, "failed to get OPP table\n");
+		goto err_clk;
+	}
+
+	rate = clk_get_rate(bus->clk);
+
+	opp = devfreq_recommended_opp(dev, &rate, 0);
+	if (IS_ERR(opp)) {
+		dev_err(dev, "failed to find dev_pm_opp\n");
+		ret = PTR_ERR(opp);
+		goto err_opp;
+	}
+	bus->curr_freq = dev_pm_opp_get_freq(opp);
+	dev_pm_opp_put(opp);
+
+	return 0;
+
+err_opp:
+	dev_pm_opp_of_remove_table(dev);
+err_clk:
+	clk_disable_unprepare(bus->clk);
+
+	return ret;
+}
+
+static int exynos_bus_profile_init(struct exynos_bus *bus,
+				   struct devfreq_dev_profile *profile)
+{
+	struct device *dev = bus->dev;
+	struct devfreq_simple_ondemand_data *ondemand_data;
+	int ret;
+
+	/* Initialize the struct profile and governor data for parent device */
+	profile->polling_ms = 50;
+	profile->target = exynos_bus_target;
+	profile->get_dev_status = exynos_bus_get_dev_status;
+	profile->exit = exynos_bus_exit;
+
+	ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
+	if (!ondemand_data)
+		return -ENOMEM;
+
+	ondemand_data->upthreshold = 40;
+	ondemand_data->downdifferential = 5;
+
+	/* Add devfreq device to monitor and handle the exynos bus */
+	bus->devfreq = devm_devfreq_add_device(dev, profile,
+						DEVFREQ_GOV_SIMPLE_ONDEMAND,
+						ondemand_data);
+	if (IS_ERR(bus->devfreq)) {
+		dev_err(dev, "failed to add devfreq device\n");
+		return PTR_ERR(bus->devfreq);
+	}
+
+	/* Register opp_notifier to catch the change of OPP  */
+	ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
+	if (ret < 0) {
+		dev_err(dev, "failed to register opp notifier\n");
+		return ret;
+	}
+
+	/*
+	 * Enable devfreq-event to get raw data which is used to determine
+	 * current bus load.
+	 */
+	ret = exynos_bus_enable_edev(bus);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable devfreq-event devices\n");
+		return ret;
+	}
+
+	ret = exynos_bus_set_event(bus);
+	if (ret < 0) {
+		dev_err(dev, "failed to set event to devfreq-event devices\n");
+		goto err_edev;
+	}
+
+	return 0;
+
+err_edev:
+	if (exynos_bus_disable_edev(bus))
+		dev_warn(dev, "failed to disable the devfreq-event devices\n");
+
+	return ret;
+}
+
+static int exynos_bus_profile_init_passive(struct exynos_bus *bus,
+					   struct devfreq_dev_profile *profile)
+{
+	struct device *dev = bus->dev;
+	struct devfreq_passive_data *passive_data;
+	struct devfreq *parent_devfreq;
+
+	/* Initialize the struct profile and governor data for passive device */
+	profile->target = exynos_bus_target;
+	profile->exit = exynos_bus_passive_exit;
+
+	/* Get the instance of parent devfreq device */
+	parent_devfreq = devfreq_get_devfreq_by_phandle(dev, "devfreq", 0);
+	if (IS_ERR(parent_devfreq))
+		return -EPROBE_DEFER;
+
+	passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL);
+	if (!passive_data)
+		return -ENOMEM;
+
+	passive_data->parent = parent_devfreq;
+
+	/* Add devfreq device for exynos bus with passive governor */
+	bus->devfreq = devm_devfreq_add_device(dev, profile, DEVFREQ_GOV_PASSIVE,
+						passive_data);
+	if (IS_ERR(bus->devfreq)) {
+		dev_err(dev,
+			"failed to add devfreq dev with passive governor\n");
+		return PTR_ERR(bus->devfreq);
+	}
+
+	return 0;
+}
+
+static int exynos_bus_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node, *node;
+	struct devfreq_dev_profile *profile;
+	struct exynos_bus *bus;
+	int ret, max_state;
+	unsigned long min_freq, max_freq;
+	bool passive = false;
+
+	if (!np) {
+		dev_err(dev, "failed to find devicetree node\n");
+		return -EINVAL;
+	}
+
+	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		return -ENOMEM;
+	mutex_init(&bus->lock);
+	bus->dev = &pdev->dev;
+	platform_set_drvdata(pdev, bus);
+
+	profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
+	if (!profile)
+		return -ENOMEM;
+
+	node = of_parse_phandle(dev->of_node, "devfreq", 0);
+	if (node) {
+		of_node_put(node);
+		passive = true;
+	} else {
+		ret = exynos_bus_parent_parse_of(np, bus);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Parse the device-tree to get the resource information */
+	ret = exynos_bus_parse_of(np, bus);
+	if (ret < 0)
+		goto err_reg;
+
+	if (passive)
+		ret = exynos_bus_profile_init_passive(bus, profile);
+	else
+		ret = exynos_bus_profile_init(bus, profile);
+
+	if (ret < 0)
+		goto err;
+
+	/* Create child platform device for the interconnect provider */
+	if (of_get_property(dev->of_node, "#interconnect-cells", NULL)) {
+		bus->icc_pdev = platform_device_register_data(
+						dev, "exynos-generic-icc",
+						PLATFORM_DEVID_AUTO, NULL, 0);
+
+		if (IS_ERR(bus->icc_pdev)) {
+			ret = PTR_ERR(bus->icc_pdev);
+			goto err;
+		}
+	}
+
+	max_state = bus->devfreq->max_state;
+	min_freq = (bus->devfreq->freq_table[0] / 1000);
+	max_freq = (bus->devfreq->freq_table[max_state - 1] / 1000);
+	pr_info("exynos-bus: new bus device registered: %s (%6ld KHz ~ %6ld KHz)\n",
+			dev_name(dev), min_freq, max_freq);
+
+	return 0;
+
+err:
+	dev_pm_opp_of_remove_table(dev);
+	clk_disable_unprepare(bus->clk);
+err_reg:
+	dev_pm_opp_put_regulators(bus->opp_token);
+
+	return ret;
+}
+
+static void exynos_bus_shutdown(struct platform_device *pdev)
+{
+	struct exynos_bus *bus = dev_get_drvdata(&pdev->dev);
+
+	devfreq_suspend_device(bus->devfreq);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_bus_resume(struct device *dev)
+{
+	struct exynos_bus *bus = dev_get_drvdata(dev);
+	int ret;
+
+	ret = exynos_bus_enable_edev(bus);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable the devfreq-event devices\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int exynos_bus_suspend(struct device *dev)
+{
+	struct exynos_bus *bus = dev_get_drvdata(dev);
+	int ret;
+
+	ret = exynos_bus_disable_edev(bus);
+	if (ret < 0) {
+		dev_err(dev, "failed to disable the devfreq-event devices\n");
+		return ret;
+	}
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops exynos_bus_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(exynos_bus_suspend, exynos_bus_resume)
+};
+
+static const struct of_device_id exynos_bus_of_match[] = {
+	{ .compatible = "samsung,exynos-bus", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, exynos_bus_of_match);
+
+static struct platform_driver exynos_bus_platdrv = {
+	.probe		= exynos_bus_probe,
+	.shutdown	= exynos_bus_shutdown,
+	.driver = {
+		.name	= "exynos-bus",
+		.pm	= &exynos_bus_pm,
+		.of_match_table = of_match_ptr(exynos_bus_of_match),
+	},
+};
+module_platform_driver(exynos_bus_platdrv);
+
+MODULE_DESCRIPTION("Generic Exynos Bus frequency driver");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_LICENSE("GPL v2");