Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3277 insertions, 0 deletions

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
new file mode 100644
index 000000000..3cf0b3838
--- /dev/null
+++ b/drivers/dma/pl330.c
@@ -0,0 +1,3277 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ */
+
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/amba/bus.h>
+#include <linux/scatterlist.h>
+#include <linux/of.h>
+#include <linux/of_dma.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/bug.h>
+#include <linux/reset.h>
+
+#include "dmaengine.h"
+#define PL330_MAX_CHAN		8
+#define PL330_MAX_IRQS		32
+#define PL330_MAX_PERI		32
+#define PL330_MAX_BURST         16
+
+#define PL330_QUIRK_BROKEN_NO_FLUSHP	BIT(0)
+#define PL330_QUIRK_PERIPH_BURST	BIT(1)
+
+enum pl330_cachectrl {
+	CCTRL0,		/* Noncacheable and nonbufferable */
+	CCTRL1,		/* Bufferable only */
+	CCTRL2,		/* Cacheable, but do not allocate */
+	CCTRL3,		/* Cacheable and bufferable, but do not allocate */
+	INVALID1,	/* AWCACHE = 0x1000 */
+	INVALID2,
+	CCTRL6,		/* Cacheable write-through, allocate on writes only */
+	CCTRL7,		/* Cacheable write-back, allocate on writes only */
+};
+
+enum pl330_byteswap {
+	SWAP_NO,
+	SWAP_2,
+	SWAP_4,
+	SWAP_8,
+	SWAP_16,
+};
+
+/* Register and Bit field Definitions */
+#define DS			0x0
+#define DS_ST_STOP		0x0
+#define DS_ST_EXEC		0x1
+#define DS_ST_CMISS		0x2
+#define DS_ST_UPDTPC		0x3
+#define DS_ST_WFE		0x4
+#define DS_ST_ATBRR		0x5
+#define DS_ST_QBUSY		0x6
+#define DS_ST_WFP		0x7
+#define DS_ST_KILL		0x8
+#define DS_ST_CMPLT		0x9
+#define DS_ST_FLTCMP		0xe
+#define DS_ST_FAULT		0xf
+
+#define DPC			0x4
+#define INTEN			0x20
+#define ES			0x24
+#define INTSTATUS		0x28
+#define INTCLR			0x2c
+#define FSM			0x30
+#define FSC			0x34
+#define FTM			0x38
+
+#define _FTC			0x40
+#define FTC(n)			(_FTC + (n)*0x4)
+
+#define _CS			0x100
+#define CS(n)			(_CS + (n)*0x8)
+#define CS_CNS			(1 << 21)
+
+#define _CPC			0x104
+#define CPC(n)			(_CPC + (n)*0x8)
+
+#define _SA			0x400
+#define SA(n)			(_SA + (n)*0x20)
+
+#define _DA			0x404
+#define DA(n)			(_DA + (n)*0x20)
+
+#define _CC			0x408
+#define CC(n)			(_CC + (n)*0x20)
+
+#define CC_SRCINC		(1 << 0)
+#define CC_DSTINC		(1 << 14)
+#define CC_SRCPRI		(1 << 8)
+#define CC_DSTPRI		(1 << 22)
+#define CC_SRCNS		(1 << 9)
+#define CC_DSTNS		(1 << 23)
+#define CC_SRCIA		(1 << 10)
+#define CC_DSTIA		(1 << 24)
+#define CC_SRCBRSTLEN_SHFT	4
+#define CC_DSTBRSTLEN_SHFT	18
+#define CC_SRCBRSTSIZE_SHFT	1
+#define CC_DSTBRSTSIZE_SHFT	15
+#define CC_SRCCCTRL_SHFT	11
+#define CC_SRCCCTRL_MASK	0x7
+#define CC_DSTCCTRL_SHFT	25
+#define CC_DRCCCTRL_MASK	0x7
+#define CC_SWAP_SHFT		28
+
+#define _LC0			0x40c
+#define LC0(n)			(_LC0 + (n)*0x20)
+
+#define _LC1			0x410
+#define LC1(n)			(_LC1 + (n)*0x20)
+
+#define DBGSTATUS		0xd00
+#define DBG_BUSY		(1 << 0)
+
+#define DBGCMD			0xd04
+#define DBGINST0		0xd08
+#define DBGINST1		0xd0c
+
+#define CR0			0xe00
+#define CR1			0xe04
+#define CR2			0xe08
+#define CR3			0xe0c
+#define CR4			0xe10
+#define CRD			0xe14
+
+#define PERIPH_ID		0xfe0
+#define PERIPH_REV_SHIFT	20
+#define PERIPH_REV_MASK		0xf
+#define PERIPH_REV_R0P0		0
+#define PERIPH_REV_R1P0		1
+#define PERIPH_REV_R1P1		2
+
+#define CR0_PERIPH_REQ_SET	(1 << 0)
+#define CR0_BOOT_EN_SET		(1 << 1)
+#define CR0_BOOT_MAN_NS		(1 << 2)
+#define CR0_NUM_CHANS_SHIFT	4
+#define CR0_NUM_CHANS_MASK	0x7
+#define CR0_NUM_PERIPH_SHIFT	12
+#define CR0_NUM_PERIPH_MASK	0x1f
+#define CR0_NUM_EVENTS_SHIFT	17
+#define CR0_NUM_EVENTS_MASK	0x1f
+
+#define CR1_ICACHE_LEN_SHIFT	0
+#define CR1_ICACHE_LEN_MASK	0x7
+#define CR1_NUM_ICACHELINES_SHIFT	4
+#define CR1_NUM_ICACHELINES_MASK	0xf
+
+#define CRD_DATA_WIDTH_SHIFT	0
+#define CRD_DATA_WIDTH_MASK	0x7
+#define CRD_WR_CAP_SHIFT	4
+#define CRD_WR_CAP_MASK		0x7
+#define CRD_WR_Q_DEP_SHIFT	8
+#define CRD_WR_Q_DEP_MASK	0xf
+#define CRD_RD_CAP_SHIFT	12
+#define CRD_RD_CAP_MASK		0x7
+#define CRD_RD_Q_DEP_SHIFT	16
+#define CRD_RD_Q_DEP_MASK	0xf
+#define CRD_DATA_BUFF_SHIFT	20
+#define CRD_DATA_BUFF_MASK	0x3ff
+
+#define PART			0x330
+#define DESIGNER		0x41
+#define REVISION		0x0
+#define INTEG_CFG		0x0
+#define PERIPH_ID_VAL		((PART << 0) | (DESIGNER << 12))
+
+#define PL330_STATE_STOPPED		(1 << 0)
+#define PL330_STATE_EXECUTING		(1 << 1)
+#define PL330_STATE_WFE			(1 << 2)
+#define PL330_STATE_FAULTING		(1 << 3)
+#define PL330_STATE_COMPLETING		(1 << 4)
+#define PL330_STATE_WFP			(1 << 5)
+#define PL330_STATE_KILLING		(1 << 6)
+#define PL330_STATE_FAULT_COMPLETING	(1 << 7)
+#define PL330_STATE_CACHEMISS		(1 << 8)
+#define PL330_STATE_UPDTPC		(1 << 9)
+#define PL330_STATE_ATBARRIER		(1 << 10)
+#define PL330_STATE_QUEUEBUSY		(1 << 11)
+#define PL330_STATE_INVALID		(1 << 15)
+
+#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
+				| PL330_STATE_WFE | PL330_STATE_FAULTING)
+
+#define CMD_DMAADDH		0x54
+#define CMD_DMAEND		0x00
+#define CMD_DMAFLUSHP		0x35
+#define CMD_DMAGO		0xa0
+#define CMD_DMALD		0x04
+#define CMD_DMALDP		0x25
+#define CMD_DMALP		0x20
+#define CMD_DMALPEND		0x28
+#define CMD_DMAKILL		0x01
+#define CMD_DMAMOV		0xbc
+#define CMD_DMANOP		0x18
+#define CMD_DMARMB		0x12
+#define CMD_DMASEV		0x34
+#define CMD_DMAST		0x08
+#define CMD_DMASTP		0x29
+#define CMD_DMASTZ		0x0c
+#define CMD_DMAWFE		0x36
+#define CMD_DMAWFP		0x30
+#define CMD_DMAWMB		0x13
+
+#define SZ_DMAADDH		3
+#define SZ_DMAEND		1
+#define SZ_DMAFLUSHP		2
+#define SZ_DMALD		1
+#define SZ_DMALDP		2
+#define SZ_DMALP		2
+#define SZ_DMALPEND		2
+#define SZ_DMAKILL		1
+#define SZ_DMAMOV		6
+#define SZ_DMANOP		1
+#define SZ_DMARMB		1
+#define SZ_DMASEV		2
+#define SZ_DMAST		1
+#define SZ_DMASTP		2
+#define SZ_DMASTZ		1
+#define SZ_DMAWFE		2
+#define SZ_DMAWFP		2
+#define SZ_DMAWMB		1
+#define SZ_DMAGO		6
+
+#define BRST_LEN(ccr)		((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
+#define BRST_SIZE(ccr)		(1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
+
+#define BYTE_TO_BURST(b, ccr)	((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
+#define BURST_TO_BYTE(c, ccr)	((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
+
+/*
+ * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
+ * at 1byte/burst for P<->M and M<->M respectively.
+ * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
+ * should be enough for P<->M and M<->M respectively.
+ */
+#define MCODE_BUFF_PER_REQ	256
+
+/* Use this _only_ to wait on transient states */
+#define UNTIL(t, s)	while (!(_state(t) & (s))) cpu_relax();
+
+#ifdef PL330_DEBUG_MCGEN
+static unsigned cmd_line;
+#define PL330_DBGCMD_DUMP(off, x...)	do { \
+						printk("%x:", cmd_line); \
+						printk(KERN_CONT x); \
+						cmd_line += off; \
+					} while (0)
+#define PL330_DBGMC_START(addr)		(cmd_line = addr)
+#else
+#define PL330_DBGCMD_DUMP(off, x...)	do {} while (0)
+#define PL330_DBGMC_START(addr)		do {} while (0)
+#endif
+
+/* The number of default descriptors */
+
+#define NR_DEFAULT_DESC	16
+
+/* Delay for runtime PM autosuspend, ms */
+#define PL330_AUTOSUSPEND_DELAY 20
+
+/* Populated by the PL330 core driver for DMA API driver's info */
+struct pl330_config {
+	u32	periph_id;
+#define DMAC_MODE_NS	(1 << 0)
+	unsigned int	mode;
+	unsigned int	data_bus_width:10; /* In number of bits */
+	unsigned int	data_buf_dep:11;
+	unsigned int	num_chan:4;
+	unsigned int	num_peri:6;
+	u32		peri_ns;
+	unsigned int	num_events:6;
+	u32		irq_ns;
+};
+
+/*
+ * Request Configuration.
+ * The PL330 core does not modify this and uses the last
+ * working configuration if the request doesn't provide any.
+ *
+ * The Client may want to provide this info only for the
+ * first request and a request with new settings.
+ */
+struct pl330_reqcfg {
+	/* Address Incrementing */
+	unsigned dst_inc:1;
+	unsigned src_inc:1;
+
+	/*
+	 * For now, the SRC & DST protection levels
+	 * and burst size/length are assumed same.
+	 */
+	bool nonsecure;
+	bool privileged;
+	bool insnaccess;
+	unsigned brst_len:5;
+	unsigned brst_size:3; /* in power of 2 */
+
+	enum pl330_cachectrl dcctl;
+	enum pl330_cachectrl scctl;
+	enum pl330_byteswap swap;
+	struct pl330_config *pcfg;
+};
+
+/*
+ * One cycle of DMAC operation.
+ * There may be more than one xfer in a request.
+ */
+struct pl330_xfer {
+	u32 src_addr;
+	u32 dst_addr;
+	/* Size to xfer */
+	u32 bytes;
+};
+
+/* The xfer callbacks are made with one of these arguments. */
+enum pl330_op_err {
+	/* The all xfers in the request were success. */
+	PL330_ERR_NONE,
+	/* If req aborted due to global error. */
+	PL330_ERR_ABORT,
+	/* If req failed due to problem with Channel. */
+	PL330_ERR_FAIL,
+};
+
+enum dmamov_dst {
+	SAR = 0,
+	CCR,
+	DAR,
+};
+
+enum pl330_dst {
+	SRC = 0,
+	DST,
+};
+
+enum pl330_cond {
+	SINGLE,
+	BURST,
+	ALWAYS,
+};
+
+struct dma_pl330_desc;
+
+struct _pl330_req {
+	u32 mc_bus;
+	void *mc_cpu;
+	struct dma_pl330_desc *desc;
+};
+
+/* ToBeDone for tasklet */
+struct _pl330_tbd {
+	bool reset_dmac;
+	bool reset_mngr;
+	u8 reset_chan;
+};
+
+/* A DMAC Thread */
+struct pl330_thread {
+	u8 id;
+	int ev;
+	/* If the channel is not yet acquired by any client */
+	bool free;
+	/* Parent DMAC */
+	struct pl330_dmac *dmac;
+	/* Only two at a time */
+	struct _pl330_req req[2];
+	/* Index of the last enqueued request */
+	unsigned lstenq;
+	/* Index of the last submitted request or -1 if the DMA is stopped */
+	int req_running;
+};
+
+enum pl330_dmac_state {
+	UNINIT,
+	INIT,
+	DYING,
+};
+
+enum desc_status {
+	/* In the DMAC pool */
+	FREE,
+	/*
+	 * Allocated to some channel during prep_xxx
+	 * Also may be sitting on the work_list.
+	 */
+	PREP,
+	/*
+	 * Sitting on the work_list and already submitted
+	 * to the PL330 core. Not more than two descriptors
+	 * of a channel can be BUSY at any time.
+	 */
+	BUSY,
+	/*
+	 * Pause was called while descriptor was BUSY. Due to hardware
+	 * limitations, only termination is possible for descriptors
+	 * that have been paused.
+	 */
+	PAUSED,
+	/*
+	 * Sitting on the channel work_list but xfer done
+	 * by PL330 core
+	 */
+	DONE,
+};
+
+struct dma_pl330_chan {
+	/* Schedule desc completion */
+	struct tasklet_struct task;
+
+	/* DMA-Engine Channel */
+	struct dma_chan chan;
+
+	/* List of submitted descriptors */
+	struct list_head submitted_list;
+	/* List of issued descriptors */
+	struct list_head work_list;
+	/* List of completed descriptors */
+	struct list_head completed_list;
+
+	/* Pointer to the DMAC that manages this channel,
+	 * NULL if the channel is available to be acquired.
+	 * As the parent, this DMAC also provides descriptors
+	 * to the channel.
+	 */
+	struct pl330_dmac *dmac;
+
+	/* To protect channel manipulation */
+	spinlock_t lock;
+
+	/*
+	 * Hardware channel thread of PL330 DMAC. NULL if the channel is
+	 * available.
+	 */
+	struct pl330_thread *thread;
+
+	/* For D-to-M and M-to-D channels */
+	int burst_sz; /* the peripheral fifo width */
+	int burst_len; /* the number of burst */
+	phys_addr_t fifo_addr;
+	/* DMA-mapped view of the FIFO; may differ if an IOMMU is present */
+	dma_addr_t fifo_dma;
+	enum dma_data_direction dir;
+	struct dma_slave_config slave_config;
+
+	/* for cyclic capability */
+	bool cyclic;
+
+	/* for runtime pm tracking */
+	bool active;
+};
+
+struct pl330_dmac {
+	/* DMA-Engine Device */
+	struct dma_device ddma;
+
+	/* Pool of descriptors available for the DMAC's channels */
+	struct list_head desc_pool;
+	/* To protect desc_pool manipulation */
+	spinlock_t pool_lock;
+
+	/* Size of MicroCode buffers for each channel. */
+	unsigned mcbufsz;
+	/* ioremap'ed address of PL330 registers. */
+	void __iomem	*base;
+	/* Populated by the PL330 core driver during pl330_add */
+	struct pl330_config	pcfg;
+
+	spinlock_t		lock;
+	/* Maximum possible events/irqs */
+	int			events[32];
+	/* BUS address of MicroCode buffer */
+	dma_addr_t		mcode_bus;
+	/* CPU address of MicroCode buffer */
+	void			*mcode_cpu;
+	/* List of all Channel threads */
+	struct pl330_thread	*channels;
+	/* Pointer to the MANAGER thread */
+	struct pl330_thread	*manager;
+	/* To handle bad news in interrupt */
+	struct tasklet_struct	tasks;
+	struct _pl330_tbd	dmac_tbd;
+	/* State of DMAC operation */
+	enum pl330_dmac_state	state;
+	/* Holds list of reqs with due callbacks */
+	struct list_head        req_done;
+
+	/* Peripheral channels connected to this DMAC */
+	unsigned int num_peripherals;
+	struct dma_pl330_chan *peripherals; /* keep at end */
+	int quirks;
+
+	struct reset_control	*rstc;
+	struct reset_control	*rstc_ocp;
+};
+
+static struct pl330_of_quirks {
+	char *quirk;
+	int id;
+} of_quirks[] = {
+	{
+		.quirk = "arm,pl330-broken-no-flushp",
+		.id = PL330_QUIRK_BROKEN_NO_FLUSHP,
+	},
+	{
+		.quirk = "arm,pl330-periph-burst",
+		.id = PL330_QUIRK_PERIPH_BURST,
+	}
+};
+
+struct dma_pl330_desc {
+	/* To attach to a queue as child */
+	struct list_head node;
+
+	/* Descriptor for the DMA Engine API */
+	struct dma_async_tx_descriptor txd;
+
+	/* Xfer for PL330 core */
+	struct pl330_xfer px;
+
+	struct pl330_reqcfg rqcfg;
+
+	enum desc_status status;
+
+	int bytes_requested;
+	bool last;
+
+	/* The channel which currently holds this desc */
+	struct dma_pl330_chan *pchan;
+
+	enum dma_transfer_direction rqtype;
+	/* Index of peripheral for the xfer. */
+	unsigned peri:5;
+	/* Hook to attach to DMAC's list of reqs with due callback */
+	struct list_head rqd;
+};
+
+struct _xfer_spec {
+	u32 ccr;
+	struct dma_pl330_desc *desc;
+};
+
+static int pl330_config_write(struct dma_chan *chan,
+			struct dma_slave_config *slave_config,
+			enum dma_transfer_direction direction);
+
+static inline bool _queue_full(struct pl330_thread *thrd)
+{
+	return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL;
+}
+
+static inline bool is_manager(struct pl330_thread *thrd)
+{
+	return thrd->dmac->manager == thrd;
+}
+
+/* If manager of the thread is in Non-Secure mode */
+static inline bool _manager_ns(struct pl330_thread *thrd)
+{
+	return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false;
+}
+
+static inline u32 get_revision(u32 periph_id)
+{
+	return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
+}
+
+static inline u32 _emit_END(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAEND;
+
+	buf[0] = CMD_DMAEND;
+
+	PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
+
+	return SZ_DMAEND;
+}
+
+static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
+{
+	if (dry_run)
+		return SZ_DMAFLUSHP;
+
+	buf[0] = CMD_DMAFLUSHP;
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
+
+	return SZ_DMAFLUSHP;
+}
+
+static inline u32 _emit_LD(unsigned dry_run, u8 buf[],	enum pl330_cond cond)
+{
+	if (dry_run)
+		return SZ_DMALD;
+
+	buf[0] = CMD_DMALD;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+	return SZ_DMALD;
+}
+
+static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMALDP;
+
+	buf[0] = CMD_DMALDP;
+
+	if (cond == BURST)
+		buf[0] |= (1 << 1);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
+		cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+	return SZ_DMALDP;
+}
+
+static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
+		unsigned loop, u8 cnt)
+{
+	if (dry_run)
+		return SZ_DMALP;
+
+	buf[0] = CMD_DMALP;
+
+	if (loop)
+		buf[0] |= (1 << 1);
+
+	cnt--; /* DMAC increments by 1 internally */
+	buf[1] = cnt;
+
+	PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
+
+	return SZ_DMALP;
+}
+
+struct _arg_LPEND {
+	enum pl330_cond cond;
+	bool forever;
+	unsigned loop;
+	u8 bjump;
+};
+
+static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
+		const struct _arg_LPEND *arg)
+{
+	enum pl330_cond cond = arg->cond;
+	bool forever = arg->forever;
+	unsigned loop = arg->loop;
+	u8 bjump = arg->bjump;
+
+	if (dry_run)
+		return SZ_DMALPEND;
+
+	buf[0] = CMD_DMALPEND;
+
+	if (loop)
+		buf[0] |= (1 << 2);
+
+	if (!forever)
+		buf[0] |= (1 << 4);
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	buf[1] = bjump;
+
+	PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
+			forever ? "FE" : "END",
+			cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
+			loop ? '1' : '0',
+			bjump);
+
+	return SZ_DMALPEND;
+}
+
+static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAKILL;
+
+	buf[0] = CMD_DMAKILL;
+
+	return SZ_DMAKILL;
+}
+
+static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
+		enum dmamov_dst dst, u32 val)
+{
+	if (dry_run)
+		return SZ_DMAMOV;
+
+	buf[0] = CMD_DMAMOV;
+	buf[1] = dst;
+	buf[2] = val;
+	buf[3] = val >> 8;
+	buf[4] = val >> 16;
+	buf[5] = val >> 24;
+
+	PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
+		dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
+
+	return SZ_DMAMOV;
+}
+
+static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMARMB;
+
+	buf[0] = CMD_DMARMB;
+
+	PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
+
+	return SZ_DMARMB;
+}
+
+static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
+{
+	if (dry_run)
+		return SZ_DMASEV;
+
+	buf[0] = CMD_DMASEV;
+
+	ev &= 0x1f;
+	ev <<= 3;
+	buf[1] = ev;
+
+	PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
+
+	return SZ_DMASEV;
+}
+
+static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
+{
+	if (dry_run)
+		return SZ_DMAST;
+
+	buf[0] = CMD_DMAST;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+	return SZ_DMAST;
+}
+
+static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMASTP;
+
+	buf[0] = CMD_DMASTP;
+
+	if (cond == BURST)
+		buf[0] |= (1 << 1);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
+		cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+	return SZ_DMASTP;
+}
+
+static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMAWFP;
+
+	buf[0] = CMD_DMAWFP;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (0 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (0 << 0);
+	else
+		buf[0] |= (0 << 1) | (1 << 0);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
+
+	return SZ_DMAWFP;
+}
+
+static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAWMB;
+
+	buf[0] = CMD_DMAWMB;
+
+	PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
+
+	return SZ_DMAWMB;
+}
+
+struct _arg_GO {
+	u8 chan;
+	u32 addr;
+	unsigned ns;
+};
+
+static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
+		const struct _arg_GO *arg)
+{
+	u8 chan = arg->chan;
+	u32 addr = arg->addr;
+	unsigned ns = arg->ns;
+
+	if (dry_run)
+		return SZ_DMAGO;
+
+	buf[0] = CMD_DMAGO;
+	buf[0] |= (ns << 1);
+	buf[1] = chan & 0x7;
+	buf[2] = addr;
+	buf[3] = addr >> 8;
+	buf[4] = addr >> 16;
+	buf[5] = addr >> 24;
+
+	return SZ_DMAGO;
+}
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+/* Returns Time-Out */
+static bool _until_dmac_idle(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->base;
+	unsigned long loops = msecs_to_loops(5);
+
+	do {
+		/* Until Manager is Idle */
+		if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
+			break;
+
+		cpu_relax();
+	} while (--loops);
+
+	if (!loops)
+		return true;
+
+	return false;
+}
+
+static inline void _execute_DBGINSN(struct pl330_thread *thrd,
+		u8 insn[], bool as_manager)
+{
+	void __iomem *regs = thrd->dmac->base;
+	u32 val;
+
+	/* If timed out due to halted state-machine */
+	if (_until_dmac_idle(thrd)) {
+		dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
+		return;
+	}
+
+	val = (insn[0] << 16) | (insn[1] << 24);
+	if (!as_manager) {
+		val |= (1 << 0);
+		val |= (thrd->id << 8); /* Channel Number */
+	}
+	writel(val, regs + DBGINST0);
+
+	val = le32_to_cpu(*((__le32 *)&insn[2]));
+	writel(val, regs + DBGINST1);
+
+	/* Get going */
+	writel(0, regs + DBGCMD);
+}
+
+static inline u32 _state(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->base;
+	u32 val;
+
+	if (is_manager(thrd))
+		val = readl(regs + DS) & 0xf;
+	else
+		val = readl(regs + CS(thrd->id)) & 0xf;
+
+	switch (val) {
+	case DS_ST_STOP:
+		return PL330_STATE_STOPPED;
+	case DS_ST_EXEC:
+		return PL330_STATE_EXECUTING;
+	case DS_ST_CMISS:
+		return PL330_STATE_CACHEMISS;
+	case DS_ST_UPDTPC:
+		return PL330_STATE_UPDTPC;
+	case DS_ST_WFE:
+		return PL330_STATE_WFE;
+	case DS_ST_FAULT:
+		return PL330_STATE_FAULTING;
+	case DS_ST_ATBRR:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_ATBARRIER;
+	case DS_ST_QBUSY:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_QUEUEBUSY;
+	case DS_ST_WFP:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_WFP;
+	case DS_ST_KILL:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_KILLING;
+	case DS_ST_CMPLT:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_COMPLETING;
+	case DS_ST_FLTCMP:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_FAULT_COMPLETING;
+	default:
+		return PL330_STATE_INVALID;
+	}
+}
+
+static void _stop(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->base;
+	u8 insn[6] = {0, 0, 0, 0, 0, 0};
+	u32 inten = readl(regs + INTEN);
+
+	if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
+		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+	/* Return if nothing needs to be done */
+	if (_state(thrd) == PL330_STATE_COMPLETING
+		  || _state(thrd) == PL330_STATE_KILLING
+		  || _state(thrd) == PL330_STATE_STOPPED)
+		return;
+
+	_emit_KILL(0, insn);
+
+	_execute_DBGINSN(thrd, insn, is_manager(thrd));
+
+	/* clear the event */
+	if (inten & (1 << thrd->ev))
+		writel(1 << thrd->ev, regs + INTCLR);
+	/* Stop generating interrupts for SEV */
+	writel(inten & ~(1 << thrd->ev), regs + INTEN);
+}
+
+/* Start doing req 'idx' of thread 'thrd' */
+static bool _trigger(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->base;
+	struct _pl330_req *req;
+	struct dma_pl330_desc *desc;
+	struct _arg_GO go;
+	unsigned ns;
+	u8 insn[6] = {0, 0, 0, 0, 0, 0};
+	int idx;
+
+	/* Return if already ACTIVE */
+	if (_state(thrd) != PL330_STATE_STOPPED)
+		return true;
+
+	idx = 1 - thrd->lstenq;
+	if (thrd->req[idx].desc != NULL) {
+		req = &thrd->req[idx];
+	} else {
+		idx = thrd->lstenq;
+		if (thrd->req[idx].desc != NULL)
+			req = &thrd->req[idx];
+		else
+			req = NULL;
+	}
+
+	/* Return if no request */
+	if (!req)
+		return true;
+
+	/* Return if req is running */
+	if (idx == thrd->req_running)
+		return true;
+
+	desc = req->desc;
+
+	ns = desc->rqcfg.nonsecure ? 1 : 0;
+
+	/* See 'Abort Sources' point-4 at Page 2-25 */
+	if (_manager_ns(thrd) && !ns)
+		dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n",
+			__func__, __LINE__);
+
+	go.chan = thrd->id;
+	go.addr = req->mc_bus;
+	go.ns = ns;
+	_emit_GO(0, insn, &go);
+
+	/* Set to generate interrupts for SEV */
+	writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
+
+	/* Only manager can execute GO */
+	_execute_DBGINSN(thrd, insn, true);
+
+	thrd->req_running = idx;
+
+	return true;
+}
+
+static bool pl330_start_thread(struct pl330_thread *thrd)
+{
+	switch (_state(thrd)) {
+	case PL330_STATE_FAULT_COMPLETING:
+		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+		if (_state(thrd) == PL330_STATE_KILLING)
+			UNTIL(thrd, PL330_STATE_STOPPED)
+		fallthrough;
+
+	case PL330_STATE_FAULTING:
+		_stop(thrd);
+		fallthrough;
+
+	case PL330_STATE_KILLING:
+	case PL330_STATE_COMPLETING:
+		UNTIL(thrd, PL330_STATE_STOPPED)
+		fallthrough;
+
+	case PL330_STATE_STOPPED:
+		return _trigger(thrd);
+
+	case PL330_STATE_WFP:
+	case PL330_STATE_QUEUEBUSY:
+	case PL330_STATE_ATBARRIER:
+	case PL330_STATE_UPDTPC:
+	case PL330_STATE_CACHEMISS:
+	case PL330_STATE_EXECUTING:
+		return true;
+
+	case PL330_STATE_WFE: /* For RESUME, nothing yet */
+	default:
+		return false;
+	}
+}
+
+static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+	struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg;
+
+	/* check lock-up free version */
+	if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
+		while (cyc--) {
+			off += _emit_LD(dry_run, &buf[off], ALWAYS);
+			off += _emit_ST(dry_run, &buf[off], ALWAYS);
+		}
+	} else {
+		while (cyc--) {
+			off += _emit_LD(dry_run, &buf[off], ALWAYS);
+			off += _emit_RMB(dry_run, &buf[off]);
+			off += _emit_ST(dry_run, &buf[off], ALWAYS);
+			off += _emit_WMB(dry_run, &buf[off]);
+		}
+	}
+
+	return off;
+}
+
+static u32 _emit_load(unsigned int dry_run, u8 buf[],
+	enum pl330_cond cond, enum dma_transfer_direction direction,
+	u8 peri)
+{
+	int off = 0;
+
+	switch (direction) {
+	case DMA_MEM_TO_MEM:
+	case DMA_MEM_TO_DEV:
+		off += _emit_LD(dry_run, &buf[off], cond);
+		break;
+
+	case DMA_DEV_TO_MEM:
+		if (cond == ALWAYS) {
+			off += _emit_LDP(dry_run, &buf[off], SINGLE,
+				peri);
+			off += _emit_LDP(dry_run, &buf[off], BURST,
+				peri);
+		} else {
+			off += _emit_LDP(dry_run, &buf[off], cond,
+				peri);
+		}
+		break;
+
+	default:
+		/* this code should be unreachable */
+		WARN_ON(1);
+		break;
+	}
+
+	return off;
+}
+
+static inline u32 _emit_store(unsigned int dry_run, u8 buf[],
+	enum pl330_cond cond, enum dma_transfer_direction direction,
+	u8 peri)
+{
+	int off = 0;
+
+	switch (direction) {
+	case DMA_MEM_TO_MEM:
+	case DMA_DEV_TO_MEM:
+		off += _emit_ST(dry_run, &buf[off], cond);
+		break;
+
+	case DMA_MEM_TO_DEV:
+		if (cond == ALWAYS) {
+			off += _emit_STP(dry_run, &buf[off], SINGLE,
+				peri);
+			off += _emit_STP(dry_run, &buf[off], BURST,
+				peri);
+		} else {
+			off += _emit_STP(dry_run, &buf[off], cond,
+				peri);
+		}
+		break;
+
+	default:
+		/* this code should be unreachable */
+		WARN_ON(1);
+		break;
+	}
+
+	return off;
+}
+
+static inline int _ldst_peripheral(struct pl330_dmac *pl330,
+				 unsigned dry_run, u8 buf[],
+				 const struct _xfer_spec *pxs, int cyc,
+				 enum pl330_cond cond)
+{
+	int off = 0;
+
+	/*
+	 * do FLUSHP at beginning to clear any stale dma requests before the
+	 * first WFP.
+	 */
+	if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
+		off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
+	while (cyc--) {
+		off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
+		off += _emit_load(dry_run, &buf[off], cond, pxs->desc->rqtype,
+			pxs->desc->peri);
+		off += _emit_store(dry_run, &buf[off], cond, pxs->desc->rqtype,
+			pxs->desc->peri);
+	}
+
+	return off;
+}
+
+static int _bursts(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+	enum pl330_cond cond = BRST_LEN(pxs->ccr) > 1 ? BURST : SINGLE;
+
+	if (pl330->quirks & PL330_QUIRK_PERIPH_BURST)
+		cond = BURST;
+
+	switch (pxs->desc->rqtype) {
+	case DMA_MEM_TO_DEV:
+	case DMA_DEV_TO_MEM:
+		off += _ldst_peripheral(pl330, dry_run, &buf[off], pxs, cyc,
+			cond);
+		break;
+
+	case DMA_MEM_TO_MEM:
+		off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
+		break;
+
+	default:
+		/* this code should be unreachable */
+		WARN_ON(1);
+		break;
+	}
+
+	return off;
+}
+
+/*
+ * only the unaligned burst transfers have the dregs.
+ * so, still transfer dregs with a reduced size burst
+ * for mem-to-mem, mem-to-dev or dev-to-mem.
+ */
+static int _dregs(struct pl330_dmac *pl330, unsigned int dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int transfer_length)
+{
+	int off = 0;
+	int dregs_ccr;
+
+	if (transfer_length == 0)
+		return off;
+
+	/*
+	 * dregs_len = (total bytes - BURST_TO_BYTE(bursts, ccr)) /
+	 *             BRST_SIZE(ccr)
+	 * the dregs len must be smaller than burst len,
+	 * so, for higher efficiency, we can modify CCR
+	 * to use a reduced size burst len for the dregs.
+	 */
+	dregs_ccr = pxs->ccr;
+	dregs_ccr &= ~((0xf << CC_SRCBRSTLEN_SHFT) |
+		(0xf << CC_DSTBRSTLEN_SHFT));
+	dregs_ccr |= (((transfer_length - 1) & 0xf) <<
+		CC_SRCBRSTLEN_SHFT);
+	dregs_ccr |= (((transfer_length - 1) & 0xf) <<
+		CC_DSTBRSTLEN_SHFT);
+
+	switch (pxs->desc->rqtype) {
+	case DMA_MEM_TO_DEV:
+	case DMA_DEV_TO_MEM:
+		off += _emit_MOV(dry_run, &buf[off], CCR, dregs_ccr);
+		off += _ldst_peripheral(pl330, dry_run, &buf[off], pxs, 1,
+					BURST);
+		break;
+
+	case DMA_MEM_TO_MEM:
+		off += _emit_MOV(dry_run, &buf[off], CCR, dregs_ccr);
+		off += _ldst_memtomem(dry_run, &buf[off], pxs, 1);
+		break;
+
+	default:
+		/* this code should be unreachable */
+		WARN_ON(1);
+		break;
+	}
+
+	return off;
+}
+
+/* Returns bytes consumed and updates bursts */
+static inline int _loop(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
+		unsigned long *bursts, const struct _xfer_spec *pxs)
+{
+	int cyc, cycmax, szlp, szlpend, szbrst, off;
+	unsigned lcnt0, lcnt1, ljmp0, ljmp1;
+	struct _arg_LPEND lpend;
+
+	if (*bursts == 1)
+		return _bursts(pl330, dry_run, buf, pxs, 1);
+
+	/* Max iterations possible in DMALP is 256 */
+	if (*bursts >= 256*256) {
+		lcnt1 = 256;
+		lcnt0 = 256;
+		cyc = *bursts / lcnt1 / lcnt0;
+	} else if (*bursts > 256) {
+		lcnt1 = 256;
+		lcnt0 = *bursts / lcnt1;
+		cyc = 1;
+	} else {
+		lcnt1 = *bursts;
+		lcnt0 = 0;
+		cyc = 1;
+	}
+
+	szlp = _emit_LP(1, buf, 0, 0);
+	szbrst = _bursts(pl330, 1, buf, pxs, 1);
+
+	lpend.cond = ALWAYS;
+	lpend.forever = false;
+	lpend.loop = 0;
+	lpend.bjump = 0;
+	szlpend = _emit_LPEND(1, buf, &lpend);
+
+	if (lcnt0) {
+		szlp *= 2;
+		szlpend *= 2;
+	}
+
+	/*
+	 * Max bursts that we can unroll due to limit on the
+	 * size of backward jump that can be encoded in DMALPEND
+	 * which is 8-bits and hence 255
+	 */
+	cycmax = (255 - (szlp + szlpend)) / szbrst;
+
+	cyc = (cycmax < cyc) ? cycmax : cyc;
+
+	off = 0;
+
+	if (lcnt0) {
+		off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
+		ljmp0 = off;
+	}
+
+	off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
+	ljmp1 = off;
+
+	off += _bursts(pl330, dry_run, &buf[off], pxs, cyc);
+
+	lpend.cond = ALWAYS;
+	lpend.forever = false;
+	lpend.loop = 1;
+	lpend.bjump = off - ljmp1;
+	off += _emit_LPEND(dry_run, &buf[off], &lpend);
+
+	if (lcnt0) {
+		lpend.cond = ALWAYS;
+		lpend.forever = false;
+		lpend.loop = 0;
+		lpend.bjump = off - ljmp0;
+		off += _emit_LPEND(dry_run, &buf[off], &lpend);
+	}
+
+	*bursts = lcnt1 * cyc;
+	if (lcnt0)
+		*bursts *= lcnt0;
+
+	return off;
+}
+
+static inline int _setup_loops(struct pl330_dmac *pl330,
+			       unsigned dry_run, u8 buf[],
+			       const struct _xfer_spec *pxs)
+{
+	struct pl330_xfer *x = &pxs->desc->px;
+	u32 ccr = pxs->ccr;
+	unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
+	int num_dregs = (x->bytes - BURST_TO_BYTE(bursts, ccr)) /
+		BRST_SIZE(ccr);
+	int off = 0;
+
+	while (bursts) {
+		c = bursts;
+		off += _loop(pl330, dry_run, &buf[off], &c, pxs);
+		bursts -= c;
+	}
+	off += _dregs(pl330, dry_run, &buf[off], pxs, num_dregs);
+
+	return off;
+}
+
+static inline int _setup_xfer(struct pl330_dmac *pl330,
+			      unsigned dry_run, u8 buf[],
+			      const struct _xfer_spec *pxs)
+{
+	struct pl330_xfer *x = &pxs->desc->px;
+	int off = 0;
+
+	/* DMAMOV SAR, x->src_addr */
+	off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
+	/* DMAMOV DAR, x->dst_addr */
+	off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
+
+	/* Setup Loop(s) */
+	off += _setup_loops(pl330, dry_run, &buf[off], pxs);
+
+	return off;
+}
+
+/*
+ * A req is a sequence of one or more xfer units.
+ * Returns the number of bytes taken to setup the MC for the req.
+ */
+static int _setup_req(struct pl330_dmac *pl330, unsigned dry_run,
+		      struct pl330_thread *thrd, unsigned index,
+		      struct _xfer_spec *pxs)
+{
+	struct _pl330_req *req = &thrd->req[index];
+	u8 *buf = req->mc_cpu;
+	int off = 0;
+
+	PL330_DBGMC_START(req->mc_bus);
+
+	/* DMAMOV CCR, ccr */
+	off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
+
+	off += _setup_xfer(pl330, dry_run, &buf[off], pxs);
+
+	/* DMASEV peripheral/event */
+	off += _emit_SEV(dry_run, &buf[off], thrd->ev);
+	/* DMAEND */
+	off += _emit_END(dry_run, &buf[off]);
+
+	return off;
+}
+
+static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
+{
+	u32 ccr = 0;
+
+	if (rqc->src_inc)
+		ccr |= CC_SRCINC;
+
+	if (rqc->dst_inc)
+		ccr |= CC_DSTINC;
+
+	/* We set same protection levels for Src and DST for now */
+	if (rqc->privileged)
+		ccr |= CC_SRCPRI | CC_DSTPRI;
+	if (rqc->nonsecure)
+		ccr |= CC_SRCNS | CC_DSTNS;
+	if (rqc->insnaccess)
+		ccr |= CC_SRCIA | CC_DSTIA;
+
+	ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
+	ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
+
+	ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
+	ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
+
+	ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
+	ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
+
+	ccr |= (rqc->swap << CC_SWAP_SHFT);
+
+	return ccr;
+}
+
+/*
+ * Submit a list of xfers after which the client wants notification.
+ * Client is not notified after each xfer unit, just once after all
+ * xfer units are done or some error occurs.
+ */
+static int pl330_submit_req(struct pl330_thread *thrd,
+	struct dma_pl330_desc *desc)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+	struct _xfer_spec xs;
+	unsigned long flags;
+	unsigned idx;
+	u32 ccr;
+	int ret = 0;
+
+	switch (desc->rqtype) {
+	case DMA_MEM_TO_DEV:
+		break;
+
+	case DMA_DEV_TO_MEM:
+		break;
+
+	case DMA_MEM_TO_MEM:
+		break;
+
+	default:
+		return -ENOTSUPP;
+	}
+
+	if (pl330->state == DYING
+		|| pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
+		dev_info(thrd->dmac->ddma.dev, "%s:%d\n",
+			__func__, __LINE__);
+		return -EAGAIN;
+	}
+
+	/* If request for non-existing peripheral */
+	if (desc->rqtype != DMA_MEM_TO_MEM &&
+	    desc->peri >= pl330->pcfg.num_peri) {
+		dev_info(thrd->dmac->ddma.dev,
+				"%s:%d Invalid peripheral(%u)!\n",
+				__func__, __LINE__, desc->peri);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	if (_queue_full(thrd)) {
+		ret = -EAGAIN;
+		goto xfer_exit;
+	}
+
+	/* Prefer Secure Channel */
+	if (!_manager_ns(thrd))
+		desc->rqcfg.nonsecure = 0;
+	else
+		desc->rqcfg.nonsecure = 1;
+
+	ccr = _prepare_ccr(&desc->rqcfg);
+
+	idx = thrd->req[0].desc == NULL ? 0 : 1;
+
+	xs.ccr = ccr;
+	xs.desc = desc;
+
+	/* First dry run to check if req is acceptable */
+	ret = _setup_req(pl330, 1, thrd, idx, &xs);
+
+	if (ret > pl330->mcbufsz / 2) {
+		dev_info(pl330->ddma.dev, "%s:%d Try increasing mcbufsz (%i/%i)\n",
+				__func__, __LINE__, ret, pl330->mcbufsz / 2);
+		ret = -ENOMEM;
+		goto xfer_exit;
+	}
+
+	/* Hook the request */
+	thrd->lstenq = idx;
+	thrd->req[idx].desc = desc;
+	_setup_req(pl330, 0, thrd, idx, &xs);
+
+	ret = 0;
+
+xfer_exit:
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return ret;
+}
+
+static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err)
+{
+	struct dma_pl330_chan *pch;
+	unsigned long flags;
+
+	if (!desc)
+		return;
+
+	pch = desc->pchan;
+
+	/* If desc aborted */
+	if (!pch)
+		return;
+
+	spin_lock_irqsave(&pch->lock, flags);
+
+	desc->status = DONE;
+
+	spin_unlock_irqrestore(&pch->lock, flags);
+
+	tasklet_schedule(&pch->task);
+}
+
+static void pl330_dotask(struct tasklet_struct *t)
+{
+	struct pl330_dmac *pl330 = from_tasklet(pl330, t, tasks);
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	/* The DMAC itself gone nuts */
+	if (pl330->dmac_tbd.reset_dmac) {
+		pl330->state = DYING;
+		/* Reset the manager too */
+		pl330->dmac_tbd.reset_mngr = true;
+		/* Clear the reset flag */
+		pl330->dmac_tbd.reset_dmac = false;
+	}
+
+	if (pl330->dmac_tbd.reset_mngr) {
+		_stop(pl330->manager);
+		/* Reset all channels */
+		pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1;
+		/* Clear the reset flag */
+		pl330->dmac_tbd.reset_mngr = false;
+	}
+
+	for (i = 0; i < pl330->pcfg.num_chan; i++) {
+
+		if (pl330->dmac_tbd.reset_chan & (1 << i)) {
+			struct pl330_thread *thrd = &pl330->channels[i];
+			void __iomem *regs = pl330->base;
+			enum pl330_op_err err;
+
+			_stop(thrd);
+
+			if (readl(regs + FSC) & (1 << thrd->id))
+				err = PL330_ERR_FAIL;
+			else
+				err = PL330_ERR_ABORT;
+
+			spin_unlock_irqrestore(&pl330->lock, flags);
+			dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err);
+			dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err);
+			spin_lock_irqsave(&pl330->lock, flags);
+
+			thrd->req[0].desc = NULL;
+			thrd->req[1].desc = NULL;
+			thrd->req_running = -1;
+
+			/* Clear the reset flag */
+			pl330->dmac_tbd.reset_chan &= ~(1 << i);
+		}
+	}
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return;
+}
+
+/* Returns 1 if state was updated, 0 otherwise */
+static int pl330_update(struct pl330_dmac *pl330)
+{
+	struct dma_pl330_desc *descdone;
+	unsigned long flags;
+	void __iomem *regs;
+	u32 val;
+	int id, ev, ret = 0;
+
+	regs = pl330->base;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	val = readl(regs + FSM) & 0x1;
+	if (val)
+		pl330->dmac_tbd.reset_mngr = true;
+	else
+		pl330->dmac_tbd.reset_mngr = false;
+
+	val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1);
+	pl330->dmac_tbd.reset_chan |= val;
+	if (val) {
+		int i = 0;
+		while (i < pl330->pcfg.num_chan) {
+			if (val & (1 << i)) {
+				dev_info(pl330->ddma.dev,
+					"Reset Channel-%d\t CS-%x FTC-%x\n",
+						i, readl(regs + CS(i)),
+						readl(regs + FTC(i)));
+				_stop(&pl330->channels[i]);
+			}
+			i++;
+		}
+	}
+
+	/* Check which event happened i.e, thread notified */
+	val = readl(regs + ES);
+	if (pl330->pcfg.num_events < 32
+			&& val & ~((1 << pl330->pcfg.num_events) - 1)) {
+		pl330->dmac_tbd.reset_dmac = true;
+		dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__,
+			__LINE__);
+		ret = 1;
+		goto updt_exit;
+	}
+
+	for (ev = 0; ev < pl330->pcfg.num_events; ev++) {
+		if (val & (1 << ev)) { /* Event occurred */
+			struct pl330_thread *thrd;
+			u32 inten = readl(regs + INTEN);
+			int active;
+
+			/* Clear the event */
+			if (inten & (1 << ev))
+				writel(1 << ev, regs + INTCLR);
+
+			ret = 1;
+
+			id = pl330->events[ev];
+
+			thrd = &pl330->channels[id];
+
+			active = thrd->req_running;
+			if (active == -1) /* Aborted */
+				continue;
+
+			/* Detach the req */
+			descdone = thrd->req[active].desc;
+			thrd->req[active].desc = NULL;
+
+			thrd->req_running = -1;
+
+			/* Get going again ASAP */
+			pl330_start_thread(thrd);
+
+			/* For now, just make a list of callbacks to be done */
+			list_add_tail(&descdone->rqd, &pl330->req_done);
+		}
+	}
+
+	/* Now that we are in no hurry, do the callbacks */
+	while (!list_empty(&pl330->req_done)) {
+		descdone = list_first_entry(&pl330->req_done,
+					    struct dma_pl330_desc, rqd);
+		list_del(&descdone->rqd);
+		spin_unlock_irqrestore(&pl330->lock, flags);
+		dma_pl330_rqcb(descdone, PL330_ERR_NONE);
+		spin_lock_irqsave(&pl330->lock, flags);
+	}
+
+updt_exit:
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	if (pl330->dmac_tbd.reset_dmac
+			|| pl330->dmac_tbd.reset_mngr
+			|| pl330->dmac_tbd.reset_chan) {
+		ret = 1;
+		tasklet_schedule(&pl330->tasks);
+	}
+
+	return ret;
+}
+
+/* Reserve an event */
+static inline int _alloc_event(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+	int ev;
+
+	for (ev = 0; ev < pl330->pcfg.num_events; ev++)
+		if (pl330->events[ev] == -1) {
+			pl330->events[ev] = thrd->id;
+			return ev;
+		}
+
+	return -1;
+}
+
+static bool _chan_ns(const struct pl330_dmac *pl330, int i)
+{
+	return pl330->pcfg.irq_ns & (1 << i);
+}
+
+/* Upon success, returns IdentityToken for the
+ * allocated channel, NULL otherwise.
+ */
+static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330)
+{
+	struct pl330_thread *thrd = NULL;
+	int chans, i;
+
+	if (pl330->state == DYING)
+		return NULL;
+
+	chans = pl330->pcfg.num_chan;
+
+	for (i = 0; i < chans; i++) {
+		thrd = &pl330->channels[i];
+		if ((thrd->free) && (!_manager_ns(thrd) ||
+					_chan_ns(pl330, i))) {
+			thrd->ev = _alloc_event(thrd);
+			if (thrd->ev >= 0) {
+				thrd->free = false;
+				thrd->lstenq = 1;
+				thrd->req[0].desc = NULL;
+				thrd->req[1].desc = NULL;
+				thrd->req_running = -1;
+				break;
+			}
+		}
+		thrd = NULL;
+	}
+
+	return thrd;
+}
+
+/* Release an event */
+static inline void _free_event(struct pl330_thread *thrd, int ev)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+
+	/* If the event is valid and was held by the thread */
+	if (ev >= 0 && ev < pl330->pcfg.num_events
+			&& pl330->events[ev] == thrd->id)
+		pl330->events[ev] = -1;
+}
+
+static void pl330_release_channel(struct pl330_thread *thrd)
+{
+	if (!thrd || thrd->free)
+		return;
+
+	_stop(thrd);
+
+	dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT);
+	dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT);
+
+	_free_event(thrd, thrd->ev);
+	thrd->free = true;
+}
+
+/* Initialize the structure for PL330 configuration, that can be used
+ * by the client driver the make best use of the DMAC
+ */
+static void read_dmac_config(struct pl330_dmac *pl330)
+{
+	void __iomem *regs = pl330->base;
+	u32 val;
+
+	val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
+	val &= CRD_DATA_WIDTH_MASK;
+	pl330->pcfg.data_bus_width = 8 * (1 << val);
+
+	val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
+	val &= CRD_DATA_BUFF_MASK;
+	pl330->pcfg.data_buf_dep = val + 1;
+
+	val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
+	val &= CR0_NUM_CHANS_MASK;
+	val += 1;
+	pl330->pcfg.num_chan = val;
+
+	val = readl(regs + CR0);
+	if (val & CR0_PERIPH_REQ_SET) {
+		val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
+		val += 1;
+		pl330->pcfg.num_peri = val;
+		pl330->pcfg.peri_ns = readl(regs + CR4);
+	} else {
+		pl330->pcfg.num_peri = 0;
+	}
+
+	val = readl(regs + CR0);
+	if (val & CR0_BOOT_MAN_NS)
+		pl330->pcfg.mode |= DMAC_MODE_NS;
+	else
+		pl330->pcfg.mode &= ~DMAC_MODE_NS;
+
+	val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
+	val &= CR0_NUM_EVENTS_MASK;
+	val += 1;
+	pl330->pcfg.num_events = val;
+
+	pl330->pcfg.irq_ns = readl(regs + CR3);
+}
+
+static inline void _reset_thread(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+
+	thrd->req[0].mc_cpu = pl330->mcode_cpu
+				+ (thrd->id * pl330->mcbufsz);
+	thrd->req[0].mc_bus = pl330->mcode_bus
+				+ (thrd->id * pl330->mcbufsz);
+	thrd->req[0].desc = NULL;
+
+	thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
+				+ pl330->mcbufsz / 2;
+	thrd->req[1].mc_bus = thrd->req[0].mc_bus
+				+ pl330->mcbufsz / 2;
+	thrd->req[1].desc = NULL;
+
+	thrd->req_running = -1;
+}
+
+static int dmac_alloc_threads(struct pl330_dmac *pl330)
+{
+	int chans = pl330->pcfg.num_chan;
+	struct pl330_thread *thrd;
+	int i;
+
+	/* Allocate 1 Manager and 'chans' Channel threads */
+	pl330->channels = kcalloc(1 + chans, sizeof(*thrd),
+					GFP_KERNEL);
+	if (!pl330->channels)
+		return -ENOMEM;
+
+	/* Init Channel threads */
+	for (i = 0; i < chans; i++) {
+		thrd = &pl330->channels[i];
+		thrd->id = i;
+		thrd->dmac = pl330;
+		_reset_thread(thrd);
+		thrd->free = true;
+	}
+
+	/* MANAGER is indexed at the end */
+	thrd = &pl330->channels[chans];
+	thrd->id = chans;
+	thrd->dmac = pl330;
+	thrd->free = false;
+	pl330->manager = thrd;
+
+	return 0;
+}
+
+static int dmac_alloc_resources(struct pl330_dmac *pl330)
+{
+	int chans = pl330->pcfg.num_chan;
+	int ret;
+
+	/*
+	 * Alloc MicroCode buffer for 'chans' Channel threads.
+	 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
+	 */
+	pl330->mcode_cpu = dma_alloc_attrs(pl330->ddma.dev,
+				chans * pl330->mcbufsz,
+				&pl330->mcode_bus, GFP_KERNEL,
+				DMA_ATTR_PRIVILEGED);
+	if (!pl330->mcode_cpu) {
+		dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	ret = dmac_alloc_threads(pl330);
+	if (ret) {
+		dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n",
+			__func__, __LINE__);
+		dma_free_attrs(pl330->ddma.dev,
+				chans * pl330->mcbufsz,
+				pl330->mcode_cpu, pl330->mcode_bus,
+				DMA_ATTR_PRIVILEGED);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pl330_add(struct pl330_dmac *pl330)
+{
+	int i, ret;
+
+	/* Check if we can handle this DMAC */
+	if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
+		dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n",
+			pl330->pcfg.periph_id);
+		return -EINVAL;
+	}
+
+	/* Read the configuration of the DMAC */
+	read_dmac_config(pl330);
+
+	if (pl330->pcfg.num_events == 0) {
+		dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n",
+			__func__, __LINE__);
+		return -EINVAL;
+	}
+
+	spin_lock_init(&pl330->lock);
+
+	INIT_LIST_HEAD(&pl330->req_done);
+
+	/* Use default MC buffer size if not provided */
+	if (!pl330->mcbufsz)
+		pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2;
+
+	/* Mark all events as free */
+	for (i = 0; i < pl330->pcfg.num_events; i++)
+		pl330->events[i] = -1;
+
+	/* Allocate resources needed by the DMAC */
+	ret = dmac_alloc_resources(pl330);
+	if (ret) {
+		dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n");
+		return ret;
+	}
+
+	tasklet_setup(&pl330->tasks, pl330_dotask);
+
+	pl330->state = INIT;
+
+	return 0;
+}
+
+static int dmac_free_threads(struct pl330_dmac *pl330)
+{
+	struct pl330_thread *thrd;
+	int i;
+
+	/* Release Channel threads */
+	for (i = 0; i < pl330->pcfg.num_chan; i++) {
+		thrd = &pl330->channels[i];
+		pl330_release_channel(thrd);
+	}
+
+	/* Free memory */
+	kfree(pl330->channels);
+
+	return 0;
+}
+
+static void pl330_del(struct pl330_dmac *pl330)
+{
+	pl330->state = UNINIT;
+
+	tasklet_kill(&pl330->tasks);
+
+	/* Free DMAC resources */
+	dmac_free_threads(pl330);
+
+	dma_free_attrs(pl330->ddma.dev,
+		pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu,
+		pl330->mcode_bus, DMA_ATTR_PRIVILEGED);
+}
+
+/* forward declaration */
+static struct amba_driver pl330_driver;
+
+static inline struct dma_pl330_chan *
+to_pchan(struct dma_chan *ch)
+{
+	if (!ch)
+		return NULL;
+
+	return container_of(ch, struct dma_pl330_chan, chan);
+}
+
+static inline struct dma_pl330_desc *
+to_desc(struct dma_async_tx_descriptor *tx)
+{
+	return container_of(tx, struct dma_pl330_desc, txd);
+}
+
+static inline void fill_queue(struct dma_pl330_chan *pch)
+{
+	struct dma_pl330_desc *desc;
+	int ret;
+
+	list_for_each_entry(desc, &pch->work_list, node) {
+
+		/* If already submitted */
+		if (desc->status == BUSY || desc->status == PAUSED)
+			continue;
+
+		ret = pl330_submit_req(pch->thread, desc);
+		if (!ret) {
+			desc->status = BUSY;
+		} else if (ret == -EAGAIN) {
+			/* QFull or DMAC Dying */
+			break;
+		} else {
+			/* Unacceptable request */
+			desc->status = DONE;
+			dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n",
+					__func__, __LINE__, desc->txd.cookie);
+			tasklet_schedule(&pch->task);
+		}
+	}
+}
+
+static void pl330_tasklet(struct tasklet_struct *t)
+{
+	struct dma_pl330_chan *pch = from_tasklet(pch, t, task);
+	struct dma_pl330_desc *desc, *_dt;
+	unsigned long flags;
+	bool power_down = false;
+
+	spin_lock_irqsave(&pch->lock, flags);
+
+	/* Pick up ripe tomatoes */
+	list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
+		if (desc->status == DONE) {
+			if (!pch->cyclic)
+				dma_cookie_complete(&desc->txd);
+			list_move_tail(&desc->node, &pch->completed_list);
+		}
+
+	/* Try to submit a req imm. next to the last completed cookie */
+	fill_queue(pch);
+
+	if (list_empty(&pch->work_list)) {
+		spin_lock(&pch->thread->dmac->lock);
+		_stop(pch->thread);
+		spin_unlock(&pch->thread->dmac->lock);
+		power_down = true;
+		pch->active = false;
+	} else {
+		/* Make sure the PL330 Channel thread is active */
+		spin_lock(&pch->thread->dmac->lock);
+		pl330_start_thread(pch->thread);
+		spin_unlock(&pch->thread->dmac->lock);
+	}
+
+	while (!list_empty(&pch->completed_list)) {
+		struct dmaengine_desc_callback cb;
+
+		desc = list_first_entry(&pch->completed_list,
+					struct dma_pl330_desc, node);
+
+		dmaengine_desc_get_callback(&desc->txd, &cb);
+
+		if (pch->cyclic) {
+			desc->status = PREP;
+			list_move_tail(&desc->node, &pch->work_list);
+			if (power_down) {
+				pch->active = true;
+				spin_lock(&pch->thread->dmac->lock);
+				pl330_start_thread(pch->thread);
+				spin_unlock(&pch->thread->dmac->lock);
+				power_down = false;
+			}
+		} else {
+			desc->status = FREE;
+			list_move_tail(&desc->node, &pch->dmac->desc_pool);
+		}
+
+		dma_descriptor_unmap(&desc->txd);
+
+		if (dmaengine_desc_callback_valid(&cb)) {
+			spin_unlock_irqrestore(&pch->lock, flags);
+			dmaengine_desc_callback_invoke(&cb, NULL);
+			spin_lock_irqsave(&pch->lock, flags);
+		}
+	}
+	spin_unlock_irqrestore(&pch->lock, flags);
+
+	/* If work list empty, power down */
+	if (power_down) {
+		pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
+		pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
+	}
+}
+
+static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
+						struct of_dma *ofdma)
+{
+	int count = dma_spec->args_count;
+	struct pl330_dmac *pl330 = ofdma->of_dma_data;
+	unsigned int chan_id;
+
+	if (!pl330)
+		return NULL;
+
+	if (count != 1)
+		return NULL;
+
+	chan_id = dma_spec->args[0];
+	if (chan_id >= pl330->num_peripherals)
+		return NULL;
+
+	return dma_get_slave_channel(&pl330->peripherals[chan_id].chan);
+}
+
+static int pl330_alloc_chan_resources(struct dma_chan *chan)
+{
+	struct dma_pl330_chan *pch = to_pchan(chan);
+	struct pl330_dmac *pl330 = pch->dmac;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	dma_cookie_init(chan);
+	pch->cyclic = false;
+
+	pch->thread = pl330_request_channel(pl330);
+	if (!pch->thread) {
+		spin_unlock_irqrestore(&pl330->lock, flags);
+		return -ENOMEM;
+	}
+
+	tasklet_setup(&pch->task, pl330_tasklet);
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return 1;
+}
+
+/*
+ * We need the data direction between the DMAC (the dma-mapping "device") and
+ * the FIFO (the dmaengine "dev"), from the FIFO's point of view. Confusing!
+ */
+static enum dma_data_direction
+pl330_dma_slave_map_dir(enum dma_transfer_direction dir)
+{
+	switch (dir) {
+	case DMA_MEM_TO_DEV:
+		return DMA_FROM_DEVICE;
+	case DMA_DEV_TO_MEM:
+		return DMA_TO_DEVICE;
+	case DMA_DEV_TO_DEV:
+		return DMA_BIDIRECTIONAL;
+	default:
+		return DMA_NONE;
+	}
+}
+
+static void pl330_unprep_slave_fifo(struct dma_pl330_chan *pch)
+{
+	if (pch->dir != DMA_NONE)
+		dma_unmap_resource(pch->chan.device->dev, pch->fifo_dma,
+				   1 << pch->burst_sz, pch->dir, 0);
+	pch->dir = DMA_NONE;
+}
+
+
+static bool pl330_prep_slave_fifo(struct dma_pl330_chan *pch,
+				  enum dma_transfer_direction dir)
+{
+	struct device *dev = pch->chan.device->dev;
+	enum dma_data_direction dma_dir = pl330_dma_slave_map_dir(dir);
+
+	/* Already mapped for this config? */
+	if (pch->dir == dma_dir)
+		return true;
+
+	pl330_unprep_slave_fifo(pch);
+	pch->fifo_dma = dma_map_resource(dev, pch->fifo_addr,
+					 1 << pch->burst_sz, dma_dir, 0);
+	if (dma_mapping_error(dev, pch->fifo_dma))
+		return false;
+
+	pch->dir = dma_dir;
+	return true;
+}
+
+static int fixup_burst_len(int max_burst_len, int quirks)
+{
+	if (max_burst_len > PL330_MAX_BURST)
+		return PL330_MAX_BURST;
+	else if (max_burst_len < 1)
+		return 1;
+	else
+		return max_burst_len;
+}
+
+static int pl330_config_write(struct dma_chan *chan,
+			struct dma_slave_config *slave_config,
+			enum dma_transfer_direction direction)
+{
+	struct dma_pl330_chan *pch = to_pchan(chan);
+
+	pl330_unprep_slave_fifo(pch);
+	if (direction == DMA_MEM_TO_DEV) {
+		if (slave_config->dst_addr)
+			pch->fifo_addr = slave_config->dst_addr;
+		if (slave_config->dst_addr_width)
+			pch->burst_sz = __ffs(slave_config->dst_addr_width);
+		pch->burst_len = fixup_burst_len(slave_config->dst_maxburst,
+			pch->dmac->quirks);
+	} else if (direction == DMA_DEV_TO_MEM) {
+		if (slave_config->src_addr)
+			pch->fifo_addr = slave_config->src_addr;
+		if (slave_config->src_addr_width)
+			pch->burst_sz = __ffs(slave_config->src_addr_width);
+		pch->burst_len = fixup_burst_len(slave_config->src_maxburst,
+			pch->dmac->quirks);
+	}
+
+	return 0;
+}
+
+static int pl330_config(struct dma_chan *chan,
+			struct dma_slave_config *slave_config)
+{
+	struct dma_pl330_chan *pch = to_pchan(chan);
+
+	memcpy(&pch->slave_config, slave_config, sizeof(*slave_config));
+
+	return 0;
+}
+
+static int pl330_terminate_all(struct dma_chan *chan)
+{
+	struct dma_pl330_chan *pch = to_pchan(chan);
+	struct dma_pl330_desc *desc;
+	unsigned long flags;
+	struct pl330_dmac *pl330 = pch->dmac;
+	bool power_down = false;
+
+	pm_runtime_get_sync(pl330->ddma.dev);
+	spin_lock_irqsave(&pch->lock, flags);
+
+	spin_lock(&pl330->lock);
+	_stop(pch->thread);
+	pch->thread->req[0].desc = NULL;
+	pch->thread->req[1].desc = NULL;
+	pch->thread->req_running = -1;
+	spin_unlock(&pl330->lock);
+
+	power_down = pch->active;
+	pch->active = false;
+
+	/* Mark all desc done */
+	list_for_each_entry(desc, &pch->submitted_list, node) {
+		desc->status = FREE;
+		dma_cookie_complete(&desc->txd);
+	}
+
+	list_for_each_entry(desc, &pch->work_list , node) {
+		desc->status = FREE;
+		dma_cookie_complete(&desc->txd);
+	}
+
+	list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool);
+	list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
+	list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
+	spin_unlock_irqrestore(&pch->lock, flags);
+	pm_runtime_mark_last_busy(pl330->ddma.dev);
+	if (power_down)
+		pm_runtime_put_autosuspend(pl330->ddma.dev);
+	pm_runtime_put_autosuspend(pl330->ddma.dev);
+
+	return 0;
+}
+
+/*
+ * We don't support DMA_RESUME command because of hardware
+ * limitations, so after pausing the channel we cannot restore
+ * it to active state. We have to terminate channel and setup
+ * DMA transfer again. This pause feature was implemented to
+ * allow safely read residue before channel termination.
+ */
+static int pl330_pause(struct dma_chan *chan)
+{
+	struct dma_pl330_chan *pch = to_pchan(chan);
+	struct pl330_dmac *pl330 = pch->dmac;
+	struct dma_pl330_desc *desc;
+	unsigned long flags;
+
+	pm_runtime_get_sync(pl330->ddma.dev);
+	spin_lock_irqsave(&pch->lock, flags);
+
+	spin_lock(&pl330->lock);
+	_stop(pch->thread);
+	spin_unlock(&pl330->lock);
+
+	list_for_each_entry(desc, &pch->work_list, node) {
+		if (desc->status == BUSY)
+			desc->status = PAUSED;
+	}
+	spin_unlock_irqrestore(&pch->lock, flags);
+	pm_runtime_mark_last_busy(pl330->ddma.dev);
+	pm_runtime_put_autosuspend(pl330->ddma.dev);
+
+	return 0;
+}
+
+static void pl330_free_chan_resources(struct dma_chan *chan)
+{
+	struct dma_pl330_chan *pch = to_pchan(chan);
+	struct pl330_dmac *pl330 = pch->dmac;
+	unsigned long flags;
+
+	tasklet_kill(&pch->task);
+
+	pm_runtime_get_sync(pch->dmac->ddma.dev);
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	pl330_release_channel(pch->thread);
+	pch->thread = NULL;
+
+	if (pch->cyclic)
+		list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+	pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
+	pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
+	pl330_unprep_slave_fifo(pch);
+}
+
+static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch,
+					   struct dma_pl330_desc *desc)
+{
+	struct pl330_thread *thrd = pch->thread;
+	struct pl330_dmac *pl330 = pch->dmac;
+	void __iomem *regs = thrd->dmac->base;
+	u32 val, addr;
+
+	pm_runtime_get_sync(pl330->ddma.dev);
+	val = addr = 0;
+	if (desc->rqcfg.src_inc) {
+		val = readl(regs + SA(thrd->id));
+		addr = desc->px.src_addr;
+	} else {
+		val = readl(regs + DA(thrd->id));
+		addr = desc->px.dst_addr;
+	}
+	pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
+	pm_runtime_put_autosuspend(pl330->ddma.dev);
+
+	/* If DMAMOV hasn't finished yet, SAR/DAR can be zero */
+	if (!val)
+		return 0;
+
+	return val - addr;
+}
+
+static enum dma_status
+pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+		 struct dma_tx_state *txstate)
+{
+	enum dma_status ret;
+	unsigned long flags;
+	struct dma_pl330_desc *desc, *running = NULL, *last_enq = NULL;
+	struct dma_pl330_chan *pch = to_pchan(chan);
+	unsigned int transferred, residual = 0;
+
+	ret = dma_cookie_status(chan, cookie, txstate);
+
+	if (!txstate)
+		return ret;
+
+	if (ret == DMA_COMPLETE)
+		goto out;
+
+	spin_lock_irqsave(&pch->lock, flags);
+	spin_lock(&pch->thread->dmac->lock);
+
+	if (pch->thread->req_running != -1)
+		running = pch->thread->req[pch->thread->req_running].desc;
+
+	last_enq = pch->thread->req[pch->thread->lstenq].desc;
+
+	/* Check in pending list */
+	list_for_each_entry(desc, &pch->work_list, node) {
+		if (desc->status == DONE)
+			transferred = desc->bytes_requested;
+		else if (running && desc == running)
+			transferred =
+				pl330_get_current_xferred_count(pch, desc);
+		else if (desc->status == BUSY || desc->status == PAUSED)
+			/*
+			 * Busy but not running means either just enqueued,
+			 * or finished and not yet marked done
+			 */
+			if (desc == last_enq)
+				transferred = 0;
+			else
+				transferred = desc->bytes_requested;
+		else
+			transferred = 0;
+		residual += desc->bytes_requested - transferred;
+		if (desc->txd.cookie == cookie) {
+			switch (desc->status) {
+			case DONE:
+				ret = DMA_COMPLETE;
+				break;
+			case PAUSED:
+				ret = DMA_PAUSED;
+				break;
+			case PREP:
+			case BUSY:
+				ret = DMA_IN_PROGRESS;
+				break;
+			default:
+				WARN_ON(1);
+			}
+			break;
+		}
+		if (desc->last)
+			residual = 0;
+	}
+	spin_unlock(&pch->thread->dmac->lock);
+	spin_unlock_irqrestore(&pch->lock, flags);
+
+out:
+	dma_set_residue(txstate, residual);
+
+	return ret;
+}
+
+static void pl330_issue_pending(struct dma_chan *chan)
+{
+	struct dma_pl330_chan *pch = to_pchan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pch->lock, flags);
+	if (list_empty(&pch->work_list)) {
+		/*
+		 * Warn on nothing pending. Empty submitted_list may
+		 * break our pm_runtime usage counter as it is
+		 * updated on work_list emptiness status.
+		 */
+		WARN_ON(list_empty(&pch->submitted_list));
+		pch->active = true;
+		pm_runtime_get_sync(pch->dmac->ddma.dev);
+	}
+	list_splice_tail_init(&pch->submitted_list, &pch->work_list);
+	spin_unlock_irqrestore(&pch->lock, flags);
+
+	pl330_tasklet(&pch->task);
+}
+
+/*
+ * We returned the last one of the circular list of descriptor(s)
+ * from prep_xxx, so the argument to submit corresponds to the last
+ * descriptor of the list.
+ */
+static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	struct dma_pl330_desc *desc, *last = to_desc(tx);
+	struct dma_pl330_chan *pch = to_pchan(tx->chan);
+	dma_cookie_t cookie;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pch->lock, flags);
+
+	/* Assign cookies to all nodes */
+	while (!list_empty(&last->node)) {
+		desc = list_entry(last->node.next, struct dma_pl330_desc, node);
+		if (pch->cyclic) {
+			desc->txd.callback = last->txd.callback;
+			desc->txd.callback_param = last->txd.callback_param;
+		}
+		desc->last = false;
+
+		dma_cookie_assign(&desc->txd);
+
+		list_move_tail(&desc->node, &pch->submitted_list);
+	}
+
+	last->last = true;
+	cookie = dma_cookie_assign(&last->txd);
+	list_add_tail(&last->node, &pch->submitted_list);
+	spin_unlock_irqrestore(&pch->lock, flags);
+
+	return cookie;
+}
+
+static inline void _init_desc(struct dma_pl330_desc *desc)
+{
+	desc->rqcfg.swap = SWAP_NO;
+	desc->rqcfg.scctl = CCTRL0;
+	desc->rqcfg.dcctl = CCTRL0;
+	desc->txd.tx_submit = pl330_tx_submit;
+
+	INIT_LIST_HEAD(&desc->node);
+}
+
+/* Returns the number of descriptors added to the DMAC pool */
+static int add_desc(struct list_head *pool, spinlock_t *lock,
+		    gfp_t flg, int count)
+{
+	struct dma_pl330_desc *desc;
+	unsigned long flags;
+	int i;
+
+	desc = kcalloc(count, sizeof(*desc), flg);
+	if (!desc)
+		return 0;
+
+	spin_lock_irqsave(lock, flags);
+
+	for (i = 0; i < count; i++) {
+		_init_desc(&desc[i]);
+		list_add_tail(&desc[i].node, pool);
+	}
+
+	spin_unlock_irqrestore(lock, flags);
+
+	return count;
+}
+
+static struct dma_pl330_desc *pluck_desc(struct list_head *pool,
+					 spinlock_t *lock)
+{
+	struct dma_pl330_desc *desc = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(lock, flags);
+
+	if (!list_empty(pool)) {
+		desc = list_entry(pool->next,
+				struct dma_pl330_desc, node);
+
+		list_del_init(&desc->node);
+
+		desc->status = PREP;
+		desc->txd.callback = NULL;
+	}
+
+	spin_unlock_irqrestore(lock, flags);
+
+	return desc;
+}
+
+static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
+{
+	struct pl330_dmac *pl330 = pch->dmac;
+	u8 *peri_id = pch->chan.private;
+	struct dma_pl330_desc *desc;
+
+	/* Pluck one desc from the pool of DMAC */
+	desc = pluck_desc(&pl330->desc_pool, &pl330->pool_lock);
+
+	/* If the DMAC pool is empty, alloc new */
+	if (!desc) {
+		static DEFINE_SPINLOCK(lock);
+		LIST_HEAD(pool);
+
+		if (!add_desc(&pool, &lock, GFP_ATOMIC, 1))
+			return NULL;
+
+		desc = pluck_desc(&pool, &lock);
+		WARN_ON(!desc || !list_empty(&pool));
+	}
+
+	/* Initialize the descriptor */
+	desc->pchan = pch;
+	desc->txd.cookie = 0;
+	async_tx_ack(&desc->txd);
+
+	desc->peri = peri_id ? pch->chan.chan_id : 0;
+	desc->rqcfg.pcfg = &pch->dmac->pcfg;
+
+	dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
+
+	return desc;
+}
+
+static inline void fill_px(struct pl330_xfer *px,
+		dma_addr_t dst, dma_addr_t src, size_t len)
+{
+	px->bytes = len;
+	px->dst_addr = dst;
+	px->src_addr = src;
+}
+
+static struct dma_pl330_desc *
+__pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
+		dma_addr_t src, size_t len)
+{
+	struct dma_pl330_desc *desc = pl330_get_desc(pch);
+
+	if (!desc) {
+		dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
+			__func__, __LINE__);
+		return NULL;
+	}
+
+	/*
+	 * Ideally we should lookout for reqs bigger than
+	 * those that can be programmed with 256 bytes of
+	 * MC buffer, but considering a req size is seldom
+	 * going to be word-unaligned and more than 200MB,
+	 * we take it easy.
+	 * Also, should the limit is reached we'd rather
+	 * have the platform increase MC buffer size than
+	 * complicating this API driver.
+	 */
+	fill_px(&desc->px, dst, src, len);
+
+	return desc;
+}
+
+/* Call after fixing burst size */
+static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
+{
+	struct dma_pl330_chan *pch = desc->pchan;
+	struct pl330_dmac *pl330 = pch->dmac;
+	int burst_len;
+
+	burst_len = pl330->pcfg.data_bus_width / 8;
+	burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan;
+	burst_len >>= desc->rqcfg.brst_size;
+
+	/* src/dst_burst_len can't be more than 16 */
+	if (burst_len > PL330_MAX_BURST)
+		burst_len = PL330_MAX_BURST;
+
+	return burst_len;
+}
+
+static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
+		struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
+		size_t period_len, enum dma_transfer_direction direction,
+		unsigned long flags)
+{
+	struct dma_pl330_desc *desc = NULL, *first = NULL;
+	struct dma_pl330_chan *pch = to_pchan(chan);
+	struct pl330_dmac *pl330 = pch->dmac;
+	unsigned int i;
+	dma_addr_t dst;
+	dma_addr_t src;
+
+	if (len % period_len != 0)
+		return NULL;
+
+	if (!is_slave_direction(direction)) {
+		dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n",
+		__func__, __LINE__);
+		return NULL;
+	}
+
+	pl330_config_write(chan, &pch->slave_config, direction);
+
+	if (!pl330_prep_slave_fifo(pch, direction))
+		return NULL;
+
+	for (i = 0; i < len / period_len; i++) {
+		desc = pl330_get_desc(pch);
+		if (!desc) {
+			unsigned long iflags;
+
+			dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
+				__func__, __LINE__);
+
+			if (!first)
+				return NULL;
+
+			spin_lock_irqsave(&pl330->pool_lock, iflags);
+
+			while (!list_empty(&first->node)) {
+				desc = list_entry(first->node.next,
+						struct dma_pl330_desc, node);
+				list_move_tail(&desc->node, &pl330->desc_pool);
+			}
+
+			list_move_tail(&first->node, &pl330->desc_pool);
+
+			spin_unlock_irqrestore(&pl330->pool_lock, iflags);
+
+			return NULL;
+		}
+
+		switch (direction) {
+		case DMA_MEM_TO_DEV:
+			desc->rqcfg.src_inc = 1;
+			desc->rqcfg.dst_inc = 0;
+			src = dma_addr;
+			dst = pch->fifo_dma;
+			break;
+		case DMA_DEV_TO_MEM:
+			desc->rqcfg.src_inc = 0;
+			desc->rqcfg.dst_inc = 1;
+			src = pch->fifo_dma;
+			dst = dma_addr;
+			break;
+		default:
+			break;
+		}
+
+		desc->rqtype = direction;
+		desc->rqcfg.brst_size = pch->burst_sz;
+		desc->rqcfg.brst_len = pch->burst_len;
+		desc->bytes_requested = period_len;
+		fill_px(&desc->px, dst, src, period_len);
+
+		if (!first)
+			first = desc;
+		else
+			list_add_tail(&desc->node, &first->node);
+
+		dma_addr += period_len;
+	}
+
+	if (!desc)
+		return NULL;
+
+	pch->cyclic = true;
+
+	return &desc->txd;
+}
+
+static struct dma_async_tx_descriptor *
+pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
+		dma_addr_t src, size_t len, unsigned long flags)
+{
+	struct dma_pl330_desc *desc;
+	struct dma_pl330_chan *pch = to_pchan(chan);
+	struct pl330_dmac *pl330;
+	int burst;
+
+	if (unlikely(!pch || !len))
+		return NULL;
+
+	pl330 = pch->dmac;
+
+	desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
+	if (!desc)
+		return NULL;
+
+	desc->rqcfg.src_inc = 1;
+	desc->rqcfg.dst_inc = 1;
+	desc->rqtype = DMA_MEM_TO_MEM;
+
+	/* Select max possible burst size */
+	burst = pl330->pcfg.data_bus_width / 8;
+
+	/*
+	 * Make sure we use a burst size that aligns with all the memcpy
+	 * parameters because our DMA programming algorithm doesn't cope with
+	 * transfers which straddle an entry in the DMA device's MFIFO.
+	 */
+	while ((src | dst | len) & (burst - 1))
+		burst /= 2;
+
+	desc->rqcfg.brst_size = 0;
+	while (burst != (1 << desc->rqcfg.brst_size))
+		desc->rqcfg.brst_size++;
+
+	desc->rqcfg.brst_len = get_burst_len(desc, len);
+	/*
+	 * If burst size is smaller than bus width then make sure we only
+	 * transfer one at a time to avoid a burst stradling an MFIFO entry.
+	 */
+	if (burst * 8 < pl330->pcfg.data_bus_width)
+		desc->rqcfg.brst_len = 1;
+
+	desc->bytes_requested = len;
+
+	return &desc->txd;
+}
+
+static void __pl330_giveback_desc(struct pl330_dmac *pl330,
+				  struct dma_pl330_desc *first)
+{
+	unsigned long flags;
+	struct dma_pl330_desc *desc;
+
+	if (!first)
+		return;
+
+	spin_lock_irqsave(&pl330->pool_lock, flags);
+
+	while (!list_empty(&first->node)) {
+		desc = list_entry(first->node.next,
+				struct dma_pl330_desc, node);
+		list_move_tail(&desc->node, &pl330->desc_pool);
+	}
+
+	list_move_tail(&first->node, &pl330->desc_pool);
+
+	spin_unlock_irqrestore(&pl330->pool_lock, flags);
+}
+
+static struct dma_async_tx_descriptor *
+pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_transfer_direction direction,
+		unsigned long flg, void *context)
+{
+	struct dma_pl330_desc *first, *desc = NULL;
+	struct dma_pl330_chan *pch = to_pchan(chan);
+	struct scatterlist *sg;
+	int i;
+
+	if (unlikely(!pch || !sgl || !sg_len))
+		return NULL;
+
+	pl330_config_write(chan, &pch->slave_config, direction);
+
+	if (!pl330_prep_slave_fifo(pch, direction))
+		return NULL;
+
+	first = NULL;
+
+	for_each_sg(sgl, sg, sg_len, i) {
+
+		desc = pl330_get_desc(pch);
+		if (!desc) {
+			struct pl330_dmac *pl330 = pch->dmac;
+
+			dev_err(pch->dmac->ddma.dev,
+				"%s:%d Unable to fetch desc\n",
+				__func__, __LINE__);
+			__pl330_giveback_desc(pl330, first);
+
+			return NULL;
+		}
+
+		if (!first)
+			first = desc;
+		else
+			list_add_tail(&desc->node, &first->node);
+
+		if (direction == DMA_MEM_TO_DEV) {
+			desc->rqcfg.src_inc = 1;
+			desc->rqcfg.dst_inc = 0;
+			fill_px(&desc->px, pch->fifo_dma, sg_dma_address(sg),
+				sg_dma_len(sg));
+		} else {
+			desc->rqcfg.src_inc = 0;
+			desc->rqcfg.dst_inc = 1;
+			fill_px(&desc->px, sg_dma_address(sg), pch->fifo_dma,
+				sg_dma_len(sg));
+		}
+
+		desc->rqcfg.brst_size = pch->burst_sz;
+		desc->rqcfg.brst_len = pch->burst_len;
+		desc->rqtype = direction;
+		desc->bytes_requested = sg_dma_len(sg);
+	}
+
+	/* Return the last desc in the chain */
+	return &desc->txd;
+}
+
+static irqreturn_t pl330_irq_handler(int irq, void *data)
+{
+	if (pl330_update(data))
+		return IRQ_HANDLED;
+	else
+		return IRQ_NONE;
+}
+
+#define PL330_DMA_BUSWIDTHS \
+	BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
+	BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+	BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+	BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
+	BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
+
+#ifdef CONFIG_DEBUG_FS
+static int pl330_debugfs_show(struct seq_file *s, void *data)
+{
+	struct pl330_dmac *pl330 = s->private;
+	int chans, pchs, ch, pr;
+
+	chans = pl330->pcfg.num_chan;
+	pchs = pl330->num_peripherals;
+
+	seq_puts(s, "PL330 physical channels:\n");
+	seq_puts(s, "THREAD:\t\tCHANNEL:\n");
+	seq_puts(s, "--------\t-----\n");
+	for (ch = 0; ch < chans; ch++) {
+		struct pl330_thread *thrd = &pl330->channels[ch];
+		int found = -1;
+
+		for (pr = 0; pr < pchs; pr++) {
+			struct dma_pl330_chan *pch = &pl330->peripherals[pr];
+
+			if (!pch->thread || thrd->id != pch->thread->id)
+				continue;
+
+			found = pr;
+		}
+
+		seq_printf(s, "%d\t\t", thrd->id);
+		if (found == -1)
+			seq_puts(s, "--\n");
+		else
+			seq_printf(s, "%d\n", found);
+	}
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(pl330_debugfs);
+
+static inline void init_pl330_debugfs(struct pl330_dmac *pl330)
+{
+	debugfs_create_file(dev_name(pl330->ddma.dev),
+			    S_IFREG | 0444, NULL, pl330,
+			    &pl330_debugfs_fops);
+}
+#else
+static inline void init_pl330_debugfs(struct pl330_dmac *pl330)
+{
+}
+#endif
+
+/*
+ * Runtime PM callbacks are provided by amba/bus.c driver.
+ *
+ * It is assumed here that IRQ safe runtime PM is chosen in probe and amba
+ * bus driver will only disable/enable the clock in runtime PM callbacks.
+ */
+static int __maybe_unused pl330_suspend(struct device *dev)
+{
+	struct amba_device *pcdev = to_amba_device(dev);
+
+	pm_runtime_force_suspend(dev);
+	clk_unprepare(pcdev->pclk);
+
+	return 0;
+}
+
+static int __maybe_unused pl330_resume(struct device *dev)
+{
+	struct amba_device *pcdev = to_amba_device(dev);
+	int ret;
+
+	ret = clk_prepare(pcdev->pclk);
+	if (ret)
+		return ret;
+
+	pm_runtime_force_resume(dev);
+
+	return ret;
+}
+
+static const struct dev_pm_ops pl330_pm = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(pl330_suspend, pl330_resume)
+};
+
+static int
+pl330_probe(struct amba_device *adev, const struct amba_id *id)
+{
+	struct pl330_config *pcfg;
+	struct pl330_dmac *pl330;
+	struct dma_pl330_chan *pch, *_p;
+	struct dma_device *pd;
+	struct resource *res;
+	int i, ret, irq;
+	int num_chan;
+	struct device_node *np = adev->dev.of_node;
+
+	ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	/* Allocate a new DMAC and its Channels */
+	pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL);
+	if (!pl330)
+		return -ENOMEM;
+
+	pd = &pl330->ddma;
+	pd->dev = &adev->dev;
+
+	pl330->mcbufsz = 0;
+
+	/* get quirk */
+	for (i = 0; i < ARRAY_SIZE(of_quirks); i++)
+		if (of_property_read_bool(np, of_quirks[i].quirk))
+			pl330->quirks |= of_quirks[i].id;
+
+	res = &adev->res;
+	pl330->base = devm_ioremap_resource(&adev->dev, res);
+	if (IS_ERR(pl330->base))
+		return PTR_ERR(pl330->base);
+
+	amba_set_drvdata(adev, pl330);
+
+	pl330->rstc = devm_reset_control_get_optional(&adev->dev, "dma");
+	if (IS_ERR(pl330->rstc)) {
+		return dev_err_probe(&adev->dev, PTR_ERR(pl330->rstc), "Failed to get reset!\n");
+	} else {
+		ret = reset_control_deassert(pl330->rstc);
+		if (ret) {
+			dev_err(&adev->dev, "Couldn't deassert the device from reset!\n");
+			return ret;
+		}
+	}
+
+	pl330->rstc_ocp = devm_reset_control_get_optional(&adev->dev, "dma-ocp");
+	if (IS_ERR(pl330->rstc_ocp)) {
+		return dev_err_probe(&adev->dev, PTR_ERR(pl330->rstc_ocp),
+				     "Failed to get OCP reset!\n");
+	} else {
+		ret = reset_control_deassert(pl330->rstc_ocp);
+		if (ret) {
+			dev_err(&adev->dev, "Couldn't deassert the device from OCP reset!\n");
+			return ret;
+		}
+	}
+
+	for (i = 0; i < AMBA_NR_IRQS; i++) {
+		irq = adev->irq[i];
+		if (irq) {
+			ret = devm_request_irq(&adev->dev, irq,
+					       pl330_irq_handler, 0,
+					       dev_name(&adev->dev), pl330);
+			if (ret)
+				return ret;
+		} else {
+			break;
+		}
+	}
+
+	pcfg = &pl330->pcfg;
+
+	pcfg->periph_id = adev->periphid;
+	ret = pl330_add(pl330);
+	if (ret)
+		return ret;
+
+	INIT_LIST_HEAD(&pl330->desc_pool);
+	spin_lock_init(&pl330->pool_lock);
+
+	/* Create a descriptor pool of default size */
+	if (!add_desc(&pl330->desc_pool, &pl330->pool_lock,
+		      GFP_KERNEL, NR_DEFAULT_DESC))
+		dev_warn(&adev->dev, "unable to allocate desc\n");
+
+	INIT_LIST_HEAD(&pd->channels);
+
+	/* Initialize channel parameters */
+	num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
+
+	pl330->num_peripherals = num_chan;
+
+	pl330->peripherals = kcalloc(num_chan, sizeof(*pch), GFP_KERNEL);
+	if (!pl330->peripherals) {
+		ret = -ENOMEM;
+		goto probe_err2;
+	}
+
+	for (i = 0; i < num_chan; i++) {
+		pch = &pl330->peripherals[i];
+
+		pch->chan.private = adev->dev.of_node;
+		INIT_LIST_HEAD(&pch->submitted_list);
+		INIT_LIST_HEAD(&pch->work_list);
+		INIT_LIST_HEAD(&pch->completed_list);
+		spin_lock_init(&pch->lock);
+		pch->thread = NULL;
+		pch->chan.device = pd;
+		pch->dmac = pl330;
+		pch->dir = DMA_NONE;
+
+		/* Add the channel to the DMAC list */
+		list_add_tail(&pch->chan.device_node, &pd->channels);
+	}
+
+	dma_cap_set(DMA_MEMCPY, pd->cap_mask);
+	if (pcfg->num_peri) {
+		dma_cap_set(DMA_SLAVE, pd->cap_mask);
+		dma_cap_set(DMA_CYCLIC, pd->cap_mask);
+		dma_cap_set(DMA_PRIVATE, pd->cap_mask);
+	}
+
+	pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
+	pd->device_free_chan_resources = pl330_free_chan_resources;
+	pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
+	pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
+	pd->device_tx_status = pl330_tx_status;
+	pd->device_prep_slave_sg = pl330_prep_slave_sg;
+	pd->device_config = pl330_config;
+	pd->device_pause = pl330_pause;
+	pd->device_terminate_all = pl330_terminate_all;
+	pd->device_issue_pending = pl330_issue_pending;
+	pd->src_addr_widths = PL330_DMA_BUSWIDTHS;
+	pd->dst_addr_widths = PL330_DMA_BUSWIDTHS;
+	pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+	pd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+	pd->max_burst = PL330_MAX_BURST;
+
+	ret = dma_async_device_register(pd);
+	if (ret) {
+		dev_err(&adev->dev, "unable to register DMAC\n");
+		goto probe_err3;
+	}
+
+	if (adev->dev.of_node) {
+		ret = of_dma_controller_register(adev->dev.of_node,
+					 of_dma_pl330_xlate, pl330);
+		if (ret) {
+			dev_err(&adev->dev,
+			"unable to register DMA to the generic DT DMA helpers\n");
+		}
+	}
+
+	/*
+	 * This is the limit for transfers with a buswidth of 1, larger
+	 * buswidths will have larger limits.
+	 */
+	ret = dma_set_max_seg_size(&adev->dev, 1900800);
+	if (ret)
+		dev_err(&adev->dev, "unable to set the seg size\n");
+
+
+	init_pl330_debugfs(pl330);
+	dev_info(&adev->dev,
+		"Loaded driver for PL330 DMAC-%x\n", adev->periphid);
+	dev_info(&adev->dev,
+		"\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
+		pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
+		pcfg->num_peri, pcfg->num_events);
+
+	pm_runtime_irq_safe(&adev->dev);
+	pm_runtime_use_autosuspend(&adev->dev);
+	pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY);
+	pm_runtime_mark_last_busy(&adev->dev);
+	pm_runtime_put_autosuspend(&adev->dev);
+
+	return 0;
+probe_err3:
+	/* Idle the DMAC */
+	list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
+			chan.device_node) {
+
+		/* Remove the channel */
+		list_del(&pch->chan.device_node);
+
+		/* Flush the channel */
+		if (pch->thread) {
+			pl330_terminate_all(&pch->chan);
+			pl330_free_chan_resources(&pch->chan);
+		}
+	}
+probe_err2:
+	pl330_del(pl330);
+
+	if (pl330->rstc_ocp)
+		reset_control_assert(pl330->rstc_ocp);
+
+	if (pl330->rstc)
+		reset_control_assert(pl330->rstc);
+	return ret;
+}
+
+static void pl330_remove(struct amba_device *adev)
+{
+	struct pl330_dmac *pl330 = amba_get_drvdata(adev);
+	struct dma_pl330_chan *pch, *_p;
+	int i, irq;
+
+	pm_runtime_get_noresume(pl330->ddma.dev);
+
+	if (adev->dev.of_node)
+		of_dma_controller_free(adev->dev.of_node);
+
+	for (i = 0; i < AMBA_NR_IRQS; i++) {
+		irq = adev->irq[i];
+		if (irq)
+			devm_free_irq(&adev->dev, irq, pl330);
+	}
+
+	dma_async_device_unregister(&pl330->ddma);
+
+	/* Idle the DMAC */
+	list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
+			chan.device_node) {
+
+		/* Remove the channel */
+		list_del(&pch->chan.device_node);
+
+		/* Flush the channel */
+		if (pch->thread) {
+			pl330_terminate_all(&pch->chan);
+			pl330_free_chan_resources(&pch->chan);
+		}
+	}
+
+	pl330_del(pl330);
+
+	if (pl330->rstc_ocp)
+		reset_control_assert(pl330->rstc_ocp);
+
+	if (pl330->rstc)
+		reset_control_assert(pl330->rstc);
+}
+
+static const struct amba_id pl330_ids[] = {
+	{
+		.id	= 0x00041330,
+		.mask	= 0x000fffff,
+	},
+	{ 0, 0 },
+};
+
+MODULE_DEVICE_TABLE(amba, pl330_ids);
+
+static struct amba_driver pl330_driver = {
+	.drv = {
+		.owner = THIS_MODULE,
+		.name = "dma-pl330",
+		.pm = &pl330_pm,
+	},
+	.id_table = pl330_ids,
+	.probe = pl330_probe,
+	.remove = pl330_remove,
+};
+
+module_amba_driver(pl330_driver);
+
+MODULE_AUTHOR("Jaswinder Singh <jassisinghbrar@gmail.com>");
+MODULE_DESCRIPTION("API Driver for PL330 DMAC");
+MODULE_LICENSE("GPL");