Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 210 insertions, 0 deletions

diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
new file mode 100644
index 000000000..0e5c17530
--- /dev/null
+++ b/drivers/iio/proximity/Kconfig
@@ -0,0 +1,210 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Proximity sensors
+#
+
+menu "Lightning sensors"
+
+config AS3935
+	tristate "AS3935 Franklin lightning sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	depends on SPI
+	help
+	  Say Y here to build SPI interface support for the Austrian
+	  Microsystems AS3935 lightning detection sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called as3935
+
+endmenu
+
+menu "Proximity and distance sensors"
+
+config CROS_EC_MKBP_PROXIMITY
+	tristate "ChromeOS EC MKBP Proximity sensor"
+	depends on CROS_EC
+	help
+	  Say Y here to enable the proximity sensor implemented via the ChromeOS EC MKBP
+	  switches protocol. You must enable one bus option (CROS_EC_I2C or CROS_EC_SPI)
+	  to use this.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cros_ec_mkbp_proximity.
+
+config ISL29501
+	tristate "Intersil ISL29501 Time Of Flight sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select IIO_KFIFO_BUF
+	help
+	  Say Y here if you want to build a driver for the Intersil ISL29501
+	  Time of Flight sensor.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called isl29501.
+
+config LIDAR_LITE_V2
+	tristate "PulsedLight LIDAR sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	depends on I2C
+	help
+	  Say Y to build a driver for PulsedLight LIDAR range finding
+	  sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pulsedlight-lite-v2
+
+config MB1232
+	tristate "MaxSonar I2CXL family ultrasonic sensors"
+	depends on I2C
+	help
+	  Say Y to build a driver for the ultrasonic sensors I2CXL of
+	  MaxBotix which have an i2c interface. It can be used to measure
+	  the distance of objects. Supported types are mb1202, mb1212,
+	  mb1222, mb1232, mb1242, mb7040, mb7137
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mb1232.
+
+config PING
+	tristate "Parallax GPIO bitbanged ranger sensors"
+	depends on GPIOLIB
+	help
+	  Say Y here to build a driver for GPIO bitbanged ranger sensors
+	  with just one GPIO for the trigger and echo. This driver can be
+	  used to measure the distance of objects.
+
+	  Actually supported are:
+	  - Parallax PING))) (ultrasonic)
+	  - Parallax LaserPING (time-of-flight)
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ping.
+
+config RFD77402
+	tristate "RFD77402 ToF sensor"
+	depends on I2C
+	help
+	  Say Y to build a driver for the RFD77402 Time-of-Flight (distance)
+	  sensor module with I2C interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rfd77402.
+
+config SRF04
+	tristate "GPIO bitbanged ultrasonic ranger sensor (SRF04, MB1000)"
+	depends on GPIOLIB
+	help
+	  Say Y here to build a driver for GPIO bitbanged ultrasonic
+	  ranger sensor. This driver can be used to measure the distance
+	  of objects. It is using two GPIOs.
+	  Actually Supported types are:
+	  - Devantech SRF04
+	  - Maxbotix mb1000
+	  - Maxbotix mb1010
+	  - Maxbotix mb1020
+	  - Maxbotix mb1030
+	  - Maxbotix mb1040
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called srf04.
+
+config SX_COMMON
+	tristate
+	help
+	  Common Semtech proximity sensor code.
+
+config SX9310
+	tristate "SX9310/SX9311 Semtech proximity sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	select SX_COMMON
+	depends on I2C
+	help
+	  Say Y here to build a driver for Semtech's SX9310/SX9311 capacitive
+	  proximity/button sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sx9310.
+
+config SX9324
+	tristate "SX9324 Semtech proximity sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	select SX_COMMON
+	depends on I2C
+	help
+	  Say Y here to build a driver for Semtech's SX9324
+	  proximity/button sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sx9324.
+
+config SX9360
+	tristate "SX9360 Semtech proximity sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	select SX_COMMON
+	depends on I2C
+	help
+	  Say Y here to build a driver for Semtech's SX9360
+	  proximity/button sensor, a simplified SX9324.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sx9360.
+
+config SX9500
+	tristate "SX9500 Semtech proximity sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Say Y here to build a driver for Semtech's SX9500 capacitive
+	  proximity/button sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sx9500.
+
+config SRF08
+	tristate "Devantech SRF02/SRF08/SRF10 ultrasonic ranger sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	depends on I2C
+	help
+	  Say Y here to build a driver for Devantech SRF02/SRF08/SRF10
+	  ultrasonic ranger sensors with i2c interface.
+	  This driver can be used to measure the distance of objects.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called srf08.
+
+config VCNL3020
+	tristate "VCNL3020 proximity sensor"
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the Vishay VCNL3020
+	  proximity sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vcnl3020.
+
+config VL53L0X_I2C
+	tristate "STMicroelectronics VL53L0X ToF ranger sensor (I2C)"
+	depends on I2C
+	help
+	  Say Y here to build a driver for STMicroelectronics VL53L0X
+	  ToF ranger sensors with i2c interface.
+	  This driver can be used to measure the distance of objects.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vl53l0x-i2c.
+
+endmenu