Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 625 insertions, 0 deletions

diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
new file mode 100644
index 000000000..9116f4248
--- /dev/null
+++ b/drivers/input/misc/soc_button_array.c
@@ -0,0 +1,625 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Supports for the button array on SoC tablets originally running
+ * Windows 8.
+ *
+ * (C) Copyright 2014 Intel Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+static bool use_low_level_irq;
+module_param(use_low_level_irq, bool, 0444);
+MODULE_PARM_DESC(use_low_level_irq, "Use low-level triggered IRQ instead of edge triggered");
+
+struct soc_button_info {
+	const char *name;
+	int acpi_index;
+	unsigned int event_type;
+	unsigned int event_code;
+	bool autorepeat;
+	bool wakeup;
+	bool active_low;
+};
+
+struct soc_device_data {
+	const struct soc_button_info *button_info;
+	int (*check)(struct device *dev);
+};
+
+/*
+ * Some of the buttons like volume up/down are auto repeat, while others
+ * are not. To support both, we register two platform devices, and put
+ * buttons into them based on whether the key should be auto repeat.
+ */
+#define BUTTON_TYPES	2
+
+struct soc_button_data {
+	struct platform_device *children[BUTTON_TYPES];
+};
+
+/*
+ * Some 2-in-1s which use the soc_button_array driver have this ugly issue in
+ * their DSDT where the _LID method modifies the irq-type settings of the GPIOs
+ * used for the power and home buttons. The intend of this AML code is to
+ * disable these buttons when the lid is closed.
+ * The AML does this by directly poking the GPIO controllers registers. This is
+ * problematic because when re-enabling the irq, which happens whenever _LID
+ * gets called with the lid open (e.g. on boot and on resume), it sets the
+ * irq-type to IRQ_TYPE_LEVEL_LOW. Where as the gpio-keys driver programs the
+ * type to, and expects it to be, IRQ_TYPE_EDGE_BOTH.
+ * To work around this we don't set gpio_keys_button.gpio on these 2-in-1s,
+ * instead we get the irq for the GPIO ourselves, configure it as
+ * IRQ_TYPE_LEVEL_LOW (to match how the _LID AML code configures it) and pass
+ * the irq in gpio_keys_button.irq. Below is a list of affected devices.
+ */
+static const struct dmi_system_id dmi_use_low_level_irq[] = {
+	{
+		/*
+		 * Acer Switch 10 SW5-012. _LID method messes with home- and
+		 * power-button GPIO IRQ settings. When (re-)enabling the irq
+		 * it ors in its own flags without clearing the previous set
+		 * ones, leading to an irq-type of IRQ_TYPE_LEVEL_LOW |
+		 * IRQ_TYPE_LEVEL_HIGH causing a continuous interrupt storm.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"),
+		},
+	},
+	{
+		/* Acer Switch V 10 SW5-017, same issue as Acer Switch 10 SW5-012. */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SW5-017"),
+		},
+	},
+	{
+		/*
+		 * Acer One S1003. _LID method messes with power-button GPIO
+		 * IRQ settings, leading to a non working power-button.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "One S1003"),
+		},
+	},
+	{
+		/*
+		 * Lenovo Yoga Tab2 1051F/1051L, something messes with the home-button
+		 * IRQ settings, leading to a non working home-button.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "60073"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "1051"),
+		},
+	},
+	{} /* Terminating entry */
+};
+
+/*
+ * Some devices have a wrong entry which points to a GPIO which is
+ * required in another driver, so this driver must not claim it.
+ */
+static const struct dmi_system_id dmi_invalid_acpi_index[] = {
+	{
+		/*
+		 * Lenovo Yoga Book X90F / X90L, the PNP0C40 home button entry
+		 * points to a GPIO which is not a home button and which is
+		 * required by the lenovo-yogabook driver.
+		 */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "YETI-11"),
+		},
+		.driver_data = (void *)1l,
+	},
+	{} /* Terminating entry */
+};
+
+/*
+ * Get the Nth GPIO number from the ACPI object.
+ */
+static int soc_button_lookup_gpio(struct device *dev, int acpi_index,
+				  int *gpio_ret, int *irq_ret)
+{
+	struct gpio_desc *desc;
+
+	desc = gpiod_get_index(dev, NULL, acpi_index, GPIOD_ASIS);
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	*gpio_ret = desc_to_gpio(desc);
+	*irq_ret = gpiod_to_irq(desc);
+
+	gpiod_put(desc);
+
+	return 0;
+}
+
+static struct platform_device *
+soc_button_device_create(struct platform_device *pdev,
+			 const struct soc_button_info *button_info,
+			 bool autorepeat)
+{
+	const struct soc_button_info *info;
+	struct platform_device *pd;
+	struct gpio_keys_button *gpio_keys;
+	struct gpio_keys_platform_data *gpio_keys_pdata;
+	const struct dmi_system_id *dmi_id;
+	int invalid_acpi_index = -1;
+	int error, gpio, irq;
+	int n_buttons = 0;
+
+	for (info = button_info; info->name; info++)
+		if (info->autorepeat == autorepeat)
+			n_buttons++;
+
+	gpio_keys_pdata = devm_kzalloc(&pdev->dev,
+				       sizeof(*gpio_keys_pdata) +
+					sizeof(*gpio_keys) * n_buttons,
+				       GFP_KERNEL);
+	if (!gpio_keys_pdata)
+		return ERR_PTR(-ENOMEM);
+
+	gpio_keys = (void *)(gpio_keys_pdata + 1);
+	n_buttons = 0;
+
+	dmi_id = dmi_first_match(dmi_invalid_acpi_index);
+	if (dmi_id)
+		invalid_acpi_index = (long)dmi_id->driver_data;
+
+	for (info = button_info; info->name; info++) {
+		if (info->autorepeat != autorepeat)
+			continue;
+
+		if (info->acpi_index == invalid_acpi_index)
+			continue;
+
+		error = soc_button_lookup_gpio(&pdev->dev, info->acpi_index, &gpio, &irq);
+		if (error || irq < 0) {
+			/*
+			 * Skip GPIO if not present. Note we deliberately
+			 * ignore -EPROBE_DEFER errors here. On some devices
+			 * Intel is using so called virtual GPIOs which are not
+			 * GPIOs at all but some way for AML code to check some
+			 * random status bits without need a custom opregion.
+			 * In some cases the resources table we parse points to
+			 * such a virtual GPIO, since these are not real GPIOs
+			 * we do not have a driver for these so they will never
+			 * show up, therefore we ignore -EPROBE_DEFER.
+			 */
+			continue;
+		}
+
+		/* See dmi_use_low_level_irq[] comment */
+		if (!autorepeat && (use_low_level_irq ||
+				    dmi_check_system(dmi_use_low_level_irq))) {
+			irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
+			gpio_keys[n_buttons].irq = irq;
+			gpio_keys[n_buttons].gpio = -ENOENT;
+		} else {
+			gpio_keys[n_buttons].gpio = gpio;
+		}
+
+		gpio_keys[n_buttons].type = info->event_type;
+		gpio_keys[n_buttons].code = info->event_code;
+		gpio_keys[n_buttons].active_low = info->active_low;
+		gpio_keys[n_buttons].desc = info->name;
+		gpio_keys[n_buttons].wakeup = info->wakeup;
+		/* These devices often use cheap buttons, use 50 ms debounce */
+		gpio_keys[n_buttons].debounce_interval = 50;
+		n_buttons++;
+	}
+
+	if (n_buttons == 0) {
+		error = -ENODEV;
+		goto err_free_mem;
+	}
+
+	gpio_keys_pdata->buttons = gpio_keys;
+	gpio_keys_pdata->nbuttons = n_buttons;
+	gpio_keys_pdata->rep = autorepeat;
+
+	pd = platform_device_register_resndata(&pdev->dev, "gpio-keys",
+					       PLATFORM_DEVID_AUTO, NULL, 0,
+					       gpio_keys_pdata,
+					       sizeof(*gpio_keys_pdata));
+	error = PTR_ERR_OR_ZERO(pd);
+	if (error) {
+		dev_err(&pdev->dev,
+			"failed registering gpio-keys: %d\n", error);
+		goto err_free_mem;
+	}
+
+	return pd;
+
+err_free_mem:
+	devm_kfree(&pdev->dev, gpio_keys_pdata);
+	return ERR_PTR(error);
+}
+
+static int soc_button_get_acpi_object_int(const union acpi_object *obj)
+{
+	if (obj->type != ACPI_TYPE_INTEGER)
+		return -1;
+
+	return obj->integer.value;
+}
+
+/* Parse a single ACPI0011 _DSD button descriptor */
+static int soc_button_parse_btn_desc(struct device *dev,
+				     const union acpi_object *desc,
+				     int collection_uid,
+				     struct soc_button_info *info)
+{
+	int upage, usage;
+
+	if (desc->type != ACPI_TYPE_PACKAGE ||
+	    desc->package.count != 5 ||
+	    /* First byte should be 1 (control) */
+	    soc_button_get_acpi_object_int(&desc->package.elements[0]) != 1 ||
+	    /* Third byte should be collection uid */
+	    soc_button_get_acpi_object_int(&desc->package.elements[2]) !=
+							    collection_uid) {
+		dev_err(dev, "Invalid ACPI Button Descriptor\n");
+		return -ENODEV;
+	}
+
+	info->event_type = EV_KEY;
+	info->active_low = true;
+	info->acpi_index =
+		soc_button_get_acpi_object_int(&desc->package.elements[1]);
+	upage = soc_button_get_acpi_object_int(&desc->package.elements[3]);
+	usage = soc_button_get_acpi_object_int(&desc->package.elements[4]);
+
+	/*
+	 * The UUID: fa6bd625-9ce8-470d-a2c7-b3ca36c4282e descriptors use HID
+	 * usage page and usage codes, but otherwise the device is not HID
+	 * compliant: it uses one irq per button instead of generating HID
+	 * input reports and some buttons should generate wakeups where as
+	 * others should not, so we cannot use the HID subsystem.
+	 *
+	 * Luckily all devices only use a few usage page + usage combinations,
+	 * so we can simply check for the known combinations here.
+	 */
+	if (upage == 0x01 && usage == 0x81) {
+		info->name = "power";
+		info->event_code = KEY_POWER;
+		info->wakeup = true;
+	} else if (upage == 0x01 && usage == 0xc6) {
+		info->name = "airplane mode switch";
+		info->event_type = EV_SW;
+		info->event_code = SW_RFKILL_ALL;
+		info->active_low = false;
+	} else if (upage == 0x01 && usage == 0xca) {
+		info->name = "rotation lock switch";
+		info->event_type = EV_SW;
+		info->event_code = SW_ROTATE_LOCK;
+	} else if (upage == 0x07 && usage == 0xe3) {
+		info->name = "home";
+		info->event_code = KEY_LEFTMETA;
+		info->wakeup = true;
+	} else if (upage == 0x0c && usage == 0xe9) {
+		info->name = "volume_up";
+		info->event_code = KEY_VOLUMEUP;
+		info->autorepeat = true;
+	} else if (upage == 0x0c && usage == 0xea) {
+		info->name = "volume_down";
+		info->event_code = KEY_VOLUMEDOWN;
+		info->autorepeat = true;
+	} else {
+		dev_warn(dev, "Unknown button index %d upage %02x usage %02x, ignoring\n",
+			 info->acpi_index, upage, usage);
+		info->name = "unknown";
+		info->event_code = KEY_RESERVED;
+	}
+
+	return 0;
+}
+
+/* ACPI0011 _DSD btns descriptors UUID: fa6bd625-9ce8-470d-a2c7-b3ca36c4282e */
+static const u8 btns_desc_uuid[16] = {
+	0x25, 0xd6, 0x6b, 0xfa, 0xe8, 0x9c, 0x0d, 0x47,
+	0xa2, 0xc7, 0xb3, 0xca, 0x36, 0xc4, 0x28, 0x2e
+};
+
+/* Parse ACPI0011 _DSD button descriptors */
+static struct soc_button_info *soc_button_get_button_info(struct device *dev)
+{
+	struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
+	const union acpi_object *desc, *el0, *uuid, *btns_desc = NULL;
+	struct soc_button_info *button_info;
+	acpi_status status;
+	int i, btn, collection_uid = -1;
+
+	status = acpi_evaluate_object_typed(ACPI_HANDLE(dev), "_DSD", NULL,
+					    &buf, ACPI_TYPE_PACKAGE);
+	if (ACPI_FAILURE(status)) {
+		dev_err(dev, "ACPI _DSD object not found\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	/* Look for the Button Descriptors UUID */
+	desc = buf.pointer;
+	for (i = 0; (i + 1) < desc->package.count; i += 2) {
+		uuid = &desc->package.elements[i];
+
+		if (uuid->type != ACPI_TYPE_BUFFER ||
+		    uuid->buffer.length != 16 ||
+		    desc->package.elements[i + 1].type != ACPI_TYPE_PACKAGE) {
+			break;
+		}
+
+		if (memcmp(uuid->buffer.pointer, btns_desc_uuid, 16) == 0) {
+			btns_desc = &desc->package.elements[i + 1];
+			break;
+		}
+	}
+
+	if (!btns_desc) {
+		dev_err(dev, "ACPI Button Descriptors not found\n");
+		button_info = ERR_PTR(-ENODEV);
+		goto out;
+	}
+
+	/* The first package describes the collection */
+	el0 = &btns_desc->package.elements[0];
+	if (el0->type == ACPI_TYPE_PACKAGE &&
+	    el0->package.count == 5 &&
+	    /* First byte should be 0 (collection) */
+	    soc_button_get_acpi_object_int(&el0->package.elements[0]) == 0 &&
+	    /* Third byte should be 0 (top level collection) */
+	    soc_button_get_acpi_object_int(&el0->package.elements[2]) == 0) {
+		collection_uid = soc_button_get_acpi_object_int(
+						&el0->package.elements[1]);
+	}
+	if (collection_uid == -1) {
+		dev_err(dev, "Invalid Button Collection Descriptor\n");
+		button_info = ERR_PTR(-ENODEV);
+		goto out;
+	}
+
+	/* There are package.count - 1 buttons + 1 terminating empty entry */
+	button_info = devm_kcalloc(dev, btns_desc->package.count,
+				   sizeof(*button_info), GFP_KERNEL);
+	if (!button_info) {
+		button_info = ERR_PTR(-ENOMEM);
+		goto out;
+	}
+
+	/* Parse the button descriptors */
+	for (i = 1, btn = 0; i < btns_desc->package.count; i++, btn++) {
+		if (soc_button_parse_btn_desc(dev,
+					      &btns_desc->package.elements[i],
+					      collection_uid,
+					      &button_info[btn])) {
+			button_info = ERR_PTR(-ENODEV);
+			goto out;
+		}
+	}
+
+out:
+	kfree(buf.pointer);
+	return button_info;
+}
+
+static int soc_button_remove(struct platform_device *pdev)
+{
+	struct soc_button_data *priv = platform_get_drvdata(pdev);
+
+	int i;
+
+	for (i = 0; i < BUTTON_TYPES; i++)
+		if (priv->children[i])
+			platform_device_unregister(priv->children[i]);
+
+	return 0;
+}
+
+static int soc_button_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct soc_device_data *device_data;
+	const struct soc_button_info *button_info;
+	struct soc_button_data *priv;
+	struct platform_device *pd;
+	int i;
+	int error;
+
+	device_data = acpi_device_get_match_data(dev);
+	if (device_data && device_data->check) {
+		error = device_data->check(dev);
+		if (error)
+			return error;
+	}
+
+	if (device_data && device_data->button_info) {
+		button_info = device_data->button_info;
+	} else {
+		button_info = soc_button_get_button_info(dev);
+		if (IS_ERR(button_info))
+			return PTR_ERR(button_info);
+	}
+
+	error = gpiod_count(dev, NULL);
+	if (error < 0) {
+		dev_dbg(dev, "no GPIO attached, ignoring...\n");
+		return -ENODEV;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	for (i = 0; i < BUTTON_TYPES; i++) {
+		pd = soc_button_device_create(pdev, button_info, i == 0);
+		if (IS_ERR(pd)) {
+			error = PTR_ERR(pd);
+			if (error != -ENODEV) {
+				soc_button_remove(pdev);
+				return error;
+			}
+			continue;
+		}
+
+		priv->children[i] = pd;
+	}
+
+	if (!priv->children[0] && !priv->children[1])
+		return -ENODEV;
+
+	if (!device_data || !device_data->button_info)
+		devm_kfree(dev, button_info);
+
+	return 0;
+}
+
+/*
+ * Definition of buttons on the tablet. The ACPI index of each button
+ * is defined in section 2.8.7.2 of "Windows ACPI Design Guide for SoC
+ * Platforms"
+ */
+static const struct soc_button_info soc_button_PNP0C40[] = {
+	{ "power", 0, EV_KEY, KEY_POWER, false, true, true },
+	{ "home", 1, EV_KEY, KEY_LEFTMETA, false, true, true },
+	{ "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true },
+	{ "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false, true },
+	{ "rotation_lock", 4, EV_KEY, KEY_ROTATE_LOCK_TOGGLE, false, false, true },
+	{ }
+};
+
+static const struct soc_device_data soc_device_PNP0C40 = {
+	.button_info = soc_button_PNP0C40,
+};
+
+static const struct soc_button_info soc_button_INT33D3[] = {
+	{ "tablet_mode", 0, EV_SW, SW_TABLET_MODE, false, false, false },
+	{ }
+};
+
+static const struct soc_device_data soc_device_INT33D3 = {
+	.button_info = soc_button_INT33D3,
+};
+
+/*
+ * Button info for Microsoft Surface 3 (non pro), this is indentical to
+ * the PNP0C40 info except that the home button is active-high.
+ *
+ * The Surface 3 Pro also has a MSHW0028 ACPI device, but that uses a custom
+ * version of the drivers/platform/x86/intel/hid.c 5 button array ACPI API
+ * instead. A check() callback is not necessary though as the Surface 3 Pro
+ * MSHW0028 ACPI device's resource table does not contain any GPIOs.
+ */
+static const struct soc_button_info soc_button_MSHW0028[] = {
+	{ "power", 0, EV_KEY, KEY_POWER, false, true, true },
+	{ "home", 1, EV_KEY, KEY_LEFTMETA, false, true, false },
+	{ "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true },
+	{ "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false, true },
+	{ }
+};
+
+static const struct soc_device_data soc_device_MSHW0028 = {
+	.button_info = soc_button_MSHW0028,
+};
+
+/*
+ * Special device check for Surface Book 2 and Surface Pro (2017).
+ * Both, the Surface Pro 4 (surfacepro3_button.c) and the above mentioned
+ * devices use MSHW0040 for power and volume buttons, however the way they
+ * have to be addressed differs. Make sure that we only load this drivers
+ * for the correct devices by checking the OEM Platform Revision provided by
+ * the _DSM method.
+ */
+#define MSHW0040_DSM_REVISION		0x01
+#define MSHW0040_DSM_GET_OMPR		0x02	// get OEM Platform Revision
+static const guid_t MSHW0040_DSM_UUID =
+	GUID_INIT(0x6fd05c69, 0xcde3, 0x49f4, 0x95, 0xed, 0xab, 0x16, 0x65,
+		  0x49, 0x80, 0x35);
+
+static int soc_device_check_MSHW0040(struct device *dev)
+{
+	acpi_handle handle = ACPI_HANDLE(dev);
+	union acpi_object *result;
+	u64 oem_platform_rev = 0;	// valid revisions are nonzero
+
+	// get OEM platform revision
+	result = acpi_evaluate_dsm_typed(handle, &MSHW0040_DSM_UUID,
+					 MSHW0040_DSM_REVISION,
+					 MSHW0040_DSM_GET_OMPR, NULL,
+					 ACPI_TYPE_INTEGER);
+
+	if (result) {
+		oem_platform_rev = result->integer.value;
+		ACPI_FREE(result);
+	}
+
+	/*
+	 * If the revision is zero here, the _DSM evaluation has failed. This
+	 * indicates that we have a Pro 4 or Book 1 and this driver should not
+	 * be used.
+	 */
+	if (oem_platform_rev == 0)
+		return -ENODEV;
+
+	dev_dbg(dev, "OEM Platform Revision %llu\n", oem_platform_rev);
+
+	return 0;
+}
+
+/*
+ * Button infos for Microsoft Surface Book 2 and Surface Pro (2017).
+ * Obtained from DSDT/testing.
+ */
+static const struct soc_button_info soc_button_MSHW0040[] = {
+	{ "power", 0, EV_KEY, KEY_POWER, false, true, true },
+	{ "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false, true },
+	{ "volume_down", 4, EV_KEY, KEY_VOLUMEDOWN, true, false, true },
+	{ }
+};
+
+static const struct soc_device_data soc_device_MSHW0040 = {
+	.button_info = soc_button_MSHW0040,
+	.check = soc_device_check_MSHW0040,
+};
+
+static const struct acpi_device_id soc_button_acpi_match[] = {
+	{ "PNP0C40", (unsigned long)&soc_device_PNP0C40 },
+	{ "INT33D3", (unsigned long)&soc_device_INT33D3 },
+	{ "ID9001", (unsigned long)&soc_device_INT33D3 },
+	{ "ACPI0011", 0 },
+
+	/* Microsoft Surface Devices (3th, 5th and 6th generation) */
+	{ "MSHW0028", (unsigned long)&soc_device_MSHW0028 },
+	{ "MSHW0040", (unsigned long)&soc_device_MSHW0040 },
+
+	{ }
+};
+
+MODULE_DEVICE_TABLE(acpi, soc_button_acpi_match);
+
+static struct platform_driver soc_button_driver = {
+	.probe          = soc_button_probe,
+	.remove		= soc_button_remove,
+	.driver		= {
+		.name = KBUILD_MODNAME,
+		.acpi_match_table = ACPI_PTR(soc_button_acpi_match),
+	},
+};
+module_platform_driver(soc_button_driver);
+
+MODULE_LICENSE("GPL");