Adding upstream version 6.1.82.upstream/6.1.82

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 30 insertions, 7 deletions

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index e8011d70d..13c36f51b 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -294,6 +294,7 @@ static const struct xpad_device {
 	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
 	{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
 	{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+	{ 0x17ef, 0x6182, "Lenovo Legion Controller for Windows", 0, XTYPE_XBOX360 },
 	{ 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
@@ -489,6 +490,7 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOX360_VENDOR(0x15e4),		/* Numark X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x162e),		/* Joytech X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
+	XPAD_XBOX360_VENDOR(0x17ef),		/* Lenovo */
 	XPAD_XBOX360_VENDOR(0x1949),		/* Amazon controllers */
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Harminix Rock Band Guitar and Drums */
 	XPAD_XBOX360_VENDOR(0x20d6),		/* PowerA Controllers */
@@ -562,6 +564,9 @@ struct xboxone_init_packet {
 #define GIP_MOTOR_LT BIT(3)
 #define GIP_MOTOR_ALL (GIP_MOTOR_R | GIP_MOTOR_L | GIP_MOTOR_RT | GIP_MOTOR_LT)
 
+#define GIP_WIRED_INTF_DATA 0
+#define GIP_WIRED_INTF_AUDIO 1
+
 /*
  * This packet is required for all Xbox One pads with 2015
  * or later firmware installed (or present from the factory).
@@ -2006,7 +2011,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	}
 
 	if (xpad->xtype == XTYPE_XBOXONE &&
-	    intf->cur_altsetting->desc.bInterfaceNumber != 0) {
+	    intf->cur_altsetting->desc.bInterfaceNumber != GIP_WIRED_INTF_DATA) {
 		/*
 		 * The Xbox One controller lists three interfaces all with the
 		 * same interface class, subclass and protocol. Differentiate by
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index c4d8caade..661d6c8b0 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -792,7 +792,6 @@ static int atkbd_probe(struct atkbd *atkbd)
 {
 	struct ps2dev *ps2dev = &atkbd->ps2dev;
 	unsigned char param[2];
-	bool skip_getid;
 
 /*
  * Some systems, where the bit-twiddling when testing the io-lines of the
@@ -806,6 +805,11 @@ static int atkbd_probe(struct atkbd *atkbd)
 				 "keyboard reset failed on %s\n",
 				 ps2dev->serio->phys);
 
+	if (atkbd_skip_getid(atkbd)) {
+		atkbd->id = 0xab83;
+		return 0;
+	}
+
 /*
  * Then we check the keyboard ID. We should get 0xab83 under normal conditions.
  * Some keyboards report different values, but the first byte is always 0xab or
@@ -814,18 +818,17 @@ static int atkbd_probe(struct atkbd *atkbd)
  */
 
 	param[0] = param[1] = 0xa5;	/* initialize with invalid values */
-	skip_getid = atkbd_skip_getid(atkbd);
-	if (skip_getid || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
+	if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
 
 /*
- * If the get ID command was skipped or failed, we check if we can at least set
+ * If the get ID command failed, we check if we can at least set
  * the LEDs on the keyboard. This should work on every keyboard out there.
  * It also turns the LEDs off, which we want anyway.
  */
 		param[0] = 0;
 		if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
 			return -1;
-		atkbd->id = skip_getid ? 0xab83 : 0xabba;
+		atkbd->id = 0xabba;
 		return 0;
 	}
 
diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index b585b1dab..dfc6c5818 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -635,6 +635,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
 	},
 	{
+		/* Fujitsu Lifebook U728 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U728"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
+	},
+	{
 		/* Gigabyte M912 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
@@ -1210,6 +1218,12 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 	},
 	{
 		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "NS5x_7xPU"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
+	},
+	{
+		.matches = {
 			DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"),
 		},
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 3f0732db7..6de64b3f9 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -884,7 +884,8 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
 		}
 	}
 
-	if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) {
+	/* Some devices with gpio_int_idx 0 list a third unused GPIO */
+	if ((ts->gpio_count == 2 || ts->gpio_count == 3) && ts->gpio_int_idx == 0) {
 		ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
 		gpio_mapping = acpi_goodix_int_first_gpios;
 	} else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) {