diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/irqchip/irq-mbigen.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/irqchip/irq-mbigen.c')
-rw-r--r-- | drivers/irqchip/irq-mbigen.c | 393 |
1 files changed, 393 insertions, 0 deletions
diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c new file mode 100644 index 000000000..f3faf5c99 --- /dev/null +++ b/drivers/irqchip/irq-mbigen.c @@ -0,0 +1,393 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2015 HiSilicon Limited, All Rights Reserved. + * Author: Jun Ma <majun258@huawei.com> + * Author: Yun Wu <wuyun.wu@huawei.com> + */ + +#include <linux/acpi.h> +#include <linux/interrupt.h> +#include <linux/irqchip.h> +#include <linux/module.h> +#include <linux/msi.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +/* Interrupt numbers per mbigen node supported */ +#define IRQS_PER_MBIGEN_NODE 128 + +/* 64 irqs (Pin0-pin63) are reserved for each mbigen chip */ +#define RESERVED_IRQ_PER_MBIGEN_CHIP 64 + +/* The maximum IRQ pin number of mbigen chip(start from 0) */ +#define MAXIMUM_IRQ_PIN_NUM 1407 + +/* + * In mbigen vector register + * bit[21:12]: event id value + * bit[11:0]: device id + */ +#define IRQ_EVENT_ID_SHIFT 12 +#define IRQ_EVENT_ID_MASK 0x3ff + +/* register range of each mbigen node */ +#define MBIGEN_NODE_OFFSET 0x1000 + +/* offset of vector register in mbigen node */ +#define REG_MBIGEN_VEC_OFFSET 0x200 + +/* + * offset of clear register in mbigen node + * This register is used to clear the status + * of interrupt + */ +#define REG_MBIGEN_CLEAR_OFFSET 0xa000 + +/* + * offset of interrupt type register + * This register is used to configure interrupt + * trigger type + */ +#define REG_MBIGEN_TYPE_OFFSET 0x0 + +/** + * struct mbigen_device - holds the information of mbigen device. + * + * @pdev: pointer to the platform device structure of mbigen chip. + * @base: mapped address of this mbigen chip. + */ +struct mbigen_device { + struct platform_device *pdev; + void __iomem *base; +}; + +static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq) +{ + unsigned int nid, pin; + + hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP; + nid = hwirq / IRQS_PER_MBIGEN_NODE + 1; + pin = hwirq % IRQS_PER_MBIGEN_NODE; + + return pin * 4 + nid * MBIGEN_NODE_OFFSET + + REG_MBIGEN_VEC_OFFSET; +} + +static inline void get_mbigen_type_reg(irq_hw_number_t hwirq, + u32 *mask, u32 *addr) +{ + unsigned int nid, irq_ofst, ofst; + + hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP; + nid = hwirq / IRQS_PER_MBIGEN_NODE + 1; + irq_ofst = hwirq % IRQS_PER_MBIGEN_NODE; + + *mask = 1 << (irq_ofst % 32); + ofst = irq_ofst / 32 * 4; + + *addr = ofst + nid * MBIGEN_NODE_OFFSET + + REG_MBIGEN_TYPE_OFFSET; +} + +static inline void get_mbigen_clear_reg(irq_hw_number_t hwirq, + u32 *mask, u32 *addr) +{ + unsigned int ofst = (hwirq / 32) * 4; + + *mask = 1 << (hwirq % 32); + *addr = ofst + REG_MBIGEN_CLEAR_OFFSET; +} + +static void mbigen_eoi_irq(struct irq_data *data) +{ + void __iomem *base = data->chip_data; + u32 mask, addr; + + get_mbigen_clear_reg(data->hwirq, &mask, &addr); + + writel_relaxed(mask, base + addr); + + irq_chip_eoi_parent(data); +} + +static int mbigen_set_type(struct irq_data *data, unsigned int type) +{ + void __iomem *base = data->chip_data; + u32 mask, addr, val; + + if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING) + return -EINVAL; + + get_mbigen_type_reg(data->hwirq, &mask, &addr); + + val = readl_relaxed(base + addr); + + if (type == IRQ_TYPE_LEVEL_HIGH) + val |= mask; + else + val &= ~mask; + + writel_relaxed(val, base + addr); + + return 0; +} + +static struct irq_chip mbigen_irq_chip = { + .name = "mbigen-v2", + .irq_mask = irq_chip_mask_parent, + .irq_unmask = irq_chip_unmask_parent, + .irq_eoi = mbigen_eoi_irq, + .irq_set_type = mbigen_set_type, + .irq_set_affinity = irq_chip_set_affinity_parent, +}; + +static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg) +{ + struct irq_data *d = irq_get_irq_data(desc->irq); + void __iomem *base = d->chip_data; + u32 val; + + if (!msg->address_lo && !msg->address_hi) + return; + + base += get_mbigen_vec_reg(d->hwirq); + val = readl_relaxed(base); + + val &= ~(IRQ_EVENT_ID_MASK << IRQ_EVENT_ID_SHIFT); + val |= (msg->data << IRQ_EVENT_ID_SHIFT); + + /* The address of doorbell is encoded in mbigen register by default + * So,we don't need to program the doorbell address at here + */ + writel_relaxed(val, base); +} + +static int mbigen_domain_translate(struct irq_domain *d, + struct irq_fwspec *fwspec, + unsigned long *hwirq, + unsigned int *type) +{ + if (is_of_node(fwspec->fwnode) || is_acpi_device_node(fwspec->fwnode)) { + if (fwspec->param_count != 2) + return -EINVAL; + + if ((fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM) || + (fwspec->param[0] < RESERVED_IRQ_PER_MBIGEN_CHIP)) + return -EINVAL; + else + *hwirq = fwspec->param[0]; + + /* If there is no valid irq type, just use the default type */ + if ((fwspec->param[1] == IRQ_TYPE_EDGE_RISING) || + (fwspec->param[1] == IRQ_TYPE_LEVEL_HIGH)) + *type = fwspec->param[1]; + else + return -EINVAL; + + return 0; + } + return -EINVAL; +} + +static int mbigen_irq_domain_alloc(struct irq_domain *domain, + unsigned int virq, + unsigned int nr_irqs, + void *args) +{ + struct irq_fwspec *fwspec = args; + irq_hw_number_t hwirq; + unsigned int type; + struct mbigen_device *mgn_chip; + int i, err; + + err = mbigen_domain_translate(domain, fwspec, &hwirq, &type); + if (err) + return err; + + err = platform_msi_device_domain_alloc(domain, virq, nr_irqs); + if (err) + return err; + + mgn_chip = platform_msi_get_host_data(domain); + + for (i = 0; i < nr_irqs; i++) + irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, + &mbigen_irq_chip, mgn_chip->base); + + return 0; +} + +static void mbigen_irq_domain_free(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs) +{ + platform_msi_device_domain_free(domain, virq, nr_irqs); +} + +static const struct irq_domain_ops mbigen_domain_ops = { + .translate = mbigen_domain_translate, + .alloc = mbigen_irq_domain_alloc, + .free = mbigen_irq_domain_free, +}; + +static int mbigen_of_create_domain(struct platform_device *pdev, + struct mbigen_device *mgn_chip) +{ + struct device *parent; + struct platform_device *child; + struct irq_domain *domain; + struct device_node *np; + u32 num_pins; + + for_each_child_of_node(pdev->dev.of_node, np) { + if (!of_property_read_bool(np, "interrupt-controller")) + continue; + + parent = platform_bus_type.dev_root; + child = of_platform_device_create(np, NULL, parent); + if (!child) { + of_node_put(np); + return -ENOMEM; + } + + if (of_property_read_u32(child->dev.of_node, "num-pins", + &num_pins) < 0) { + dev_err(&pdev->dev, "No num-pins property\n"); + of_node_put(np); + return -EINVAL; + } + + domain = platform_msi_create_device_domain(&child->dev, num_pins, + mbigen_write_msg, + &mbigen_domain_ops, + mgn_chip); + if (!domain) { + of_node_put(np); + return -ENOMEM; + } + } + + return 0; +} + +#ifdef CONFIG_ACPI +static const struct acpi_device_id mbigen_acpi_match[] = { + { "HISI0152", 0 }, + {} +}; +MODULE_DEVICE_TABLE(acpi, mbigen_acpi_match); + +static int mbigen_acpi_create_domain(struct platform_device *pdev, + struct mbigen_device *mgn_chip) +{ + struct irq_domain *domain; + u32 num_pins = 0; + int ret; + + /* + * "num-pins" is the total number of interrupt pins implemented in + * this mbigen instance, and mbigen is an interrupt controller + * connected to ITS converting wired interrupts into MSI, so we + * use "num-pins" to alloc MSI vectors which are needed by client + * devices connected to it. + * + * Here is the DSDT device node used for mbigen in firmware: + * Device(MBI0) { + * Name(_HID, "HISI0152") + * Name(_UID, Zero) + * Name(_CRS, ResourceTemplate() { + * Memory32Fixed(ReadWrite, 0xa0080000, 0x10000) + * }) + * + * Name(_DSD, Package () { + * ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + * Package () { + * Package () {"num-pins", 378} + * } + * }) + * } + */ + ret = device_property_read_u32(&pdev->dev, "num-pins", &num_pins); + if (ret || num_pins == 0) + return -EINVAL; + + domain = platform_msi_create_device_domain(&pdev->dev, num_pins, + mbigen_write_msg, + &mbigen_domain_ops, + mgn_chip); + if (!domain) + return -ENOMEM; + + return 0; +} +#else +static inline int mbigen_acpi_create_domain(struct platform_device *pdev, + struct mbigen_device *mgn_chip) +{ + return -ENODEV; +} +#endif + +static int mbigen_device_probe(struct platform_device *pdev) +{ + struct mbigen_device *mgn_chip; + struct resource *res; + int err; + + mgn_chip = devm_kzalloc(&pdev->dev, sizeof(*mgn_chip), GFP_KERNEL); + if (!mgn_chip) + return -ENOMEM; + + mgn_chip->pdev = pdev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + mgn_chip->base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!mgn_chip->base) { + dev_err(&pdev->dev, "failed to ioremap %pR\n", res); + return -ENOMEM; + } + + if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) + err = mbigen_of_create_domain(pdev, mgn_chip); + else if (ACPI_COMPANION(&pdev->dev)) + err = mbigen_acpi_create_domain(pdev, mgn_chip); + else + err = -EINVAL; + + if (err) { + dev_err(&pdev->dev, "Failed to create mbi-gen irqdomain\n"); + return err; + } + + platform_set_drvdata(pdev, mgn_chip); + return 0; +} + +static const struct of_device_id mbigen_of_match[] = { + { .compatible = "hisilicon,mbigen-v2" }, + { /* END */ } +}; +MODULE_DEVICE_TABLE(of, mbigen_of_match); + +static struct platform_driver mbigen_platform_driver = { + .driver = { + .name = "Hisilicon MBIGEN-V2", + .of_match_table = mbigen_of_match, + .acpi_match_table = ACPI_PTR(mbigen_acpi_match), + .suppress_bind_attrs = true, + }, + .probe = mbigen_device_probe, +}; + +module_platform_driver(mbigen_platform_driver); + +MODULE_AUTHOR("Jun Ma <majun258@huawei.com>"); +MODULE_AUTHOR("Yun Wu <wuyun.wu@huawei.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("HiSilicon MBI Generator driver"); |