Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

6 files changed, 3177 insertions, 0 deletions

diff --git a/drivers/media/pci/intel/ipu3/Kconfig b/drivers/media/pci/intel/ipu3/Kconfig
new file mode 100644
index 000000000..39bd3be0b
--- /dev/null
+++ b/drivers/media/pci/intel/ipu3/Kconfig
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config VIDEO_IPU3_CIO2
+	tristate "Intel ipu3-cio2 driver"
+	depends on VIDEO_DEV && PCI
+	depends on ACPI || COMPILE_TEST
+	depends on X86
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+	select V4L2_FWNODE
+	select VIDEOBUF2_DMA_SG
+
+	help
+	  This is the Intel IPU3 CIO2 CSI-2 receiver unit, found in Intel
+	  Skylake and Kaby Lake SoCs and used for capturing images and
+	  video from a camera sensor.
+
+	  Say Y or M here if you have a Skylake/Kaby Lake SoC with MIPI CSI-2
+	  connected camera.
+	  The module will be called ipu3-cio2.
+
+config CIO2_BRIDGE
+	bool "IPU3 CIO2 Sensors Bridge"
+	depends on VIDEO_IPU3_CIO2 && ACPI
+	help
+	  This extension provides an API for the ipu3-cio2 driver to create
+	  connections to cameras that are hidden in the SSDB buffer in ACPI.
+	  It can be used to enable support for cameras in detachable / hybrid
+	  devices that ship with Windows.
+
+	  Say Y here if your device is a detachable / hybrid laptop that comes
+	  with Windows installed by the OEM, for example:
+
+		- Microsoft Surface models (except Surface Pro 3)
+		- The Lenovo Miix line (for example the 510, 520, 710 and 720)
+		- Dell 7285
+
+	  If in doubt, say N here.
diff --git a/drivers/media/pci/intel/ipu3/Makefile b/drivers/media/pci/intel/ipu3/Makefile
new file mode 100644
index 000000000..933777e6e
--- /dev/null
+++ b/drivers/media/pci/intel/ipu3/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_VIDEO_IPU3_CIO2) += ipu3-cio2.o
+
+ipu3-cio2-y += ipu3-cio2-main.o
+ipu3-cio2-$(CONFIG_CIO2_BRIDGE) += cio2-bridge.o
diff --git a/drivers/media/pci/intel/ipu3/cio2-bridge.c b/drivers/media/pci/intel/ipu3/cio2-bridge.c
new file mode 100644
index 000000000..df6c94da2
--- /dev/null
+++ b/drivers/media/pci/intel/ipu3/cio2-bridge.c
@@ -0,0 +1,462 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Author: Dan Scally <djrscally@gmail.com> */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/property.h>
+#include <media/v4l2-fwnode.h>
+
+#include "cio2-bridge.h"
+
+/*
+ * Extend this array with ACPI Hardware IDs of devices known to be working
+ * plus the number of link-frequencies expected by their drivers, along with
+ * the frequency values in hertz. This is somewhat opportunistic way of adding
+ * support for this for now in the hopes of a better source for the information
+ * (possibly some encoded value in the SSDB buffer that we're unaware of)
+ * becoming apparent in the future.
+ *
+ * Do not add an entry for a sensor that is not actually supported.
+ */
+static const struct cio2_sensor_config cio2_supported_sensors[] = {
+	/* Omnivision OV5693 */
+	CIO2_SENSOR_CONFIG("INT33BE", 1, 419200000),
+	/* Omnivision OV8865 */
+	CIO2_SENSOR_CONFIG("INT347A", 1, 360000000),
+	/* Omnivision OV7251 */
+	CIO2_SENSOR_CONFIG("INT347E", 1, 319200000),
+	/* Omnivision OV2680 */
+	CIO2_SENSOR_CONFIG("OVTI2680", 0),
+};
+
+static const struct cio2_property_names prop_names = {
+	.clock_frequency = "clock-frequency",
+	.rotation = "rotation",
+	.orientation = "orientation",
+	.bus_type = "bus-type",
+	.data_lanes = "data-lanes",
+	.remote_endpoint = "remote-endpoint",
+	.link_frequencies = "link-frequencies",
+};
+
+static const char * const cio2_vcm_types[] = {
+	"ad5823",
+	"dw9714",
+	"ad5816",
+	"dw9719",
+	"dw9718",
+	"dw9806b",
+	"wv517s",
+	"lc898122xa",
+	"lc898212axb",
+};
+
+static int cio2_bridge_read_acpi_buffer(struct acpi_device *adev, char *id,
+					void *data, u32 size)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj;
+	acpi_status status;
+	int ret = 0;
+
+	status = acpi_evaluate_object(adev->handle, id, NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	obj = buffer.pointer;
+	if (!obj) {
+		dev_err(&adev->dev, "Couldn't locate ACPI buffer\n");
+		return -ENODEV;
+	}
+
+	if (obj->type != ACPI_TYPE_BUFFER) {
+		dev_err(&adev->dev, "Not an ACPI buffer\n");
+		ret = -ENODEV;
+		goto out_free_buff;
+	}
+
+	if (obj->buffer.length > size) {
+		dev_err(&adev->dev, "Given buffer is too small\n");
+		ret = -EINVAL;
+		goto out_free_buff;
+	}
+
+	memcpy(data, obj->buffer.pointer, obj->buffer.length);
+
+out_free_buff:
+	kfree(buffer.pointer);
+	return ret;
+}
+
+static u32 cio2_bridge_parse_rotation(struct cio2_sensor *sensor)
+{
+	switch (sensor->ssdb.degree) {
+	case CIO2_SENSOR_ROTATION_NORMAL:
+		return 0;
+	case CIO2_SENSOR_ROTATION_INVERTED:
+		return 180;
+	default:
+		dev_warn(&sensor->adev->dev,
+			 "Unknown rotation %d. Assume 0 degree rotation\n",
+			 sensor->ssdb.degree);
+		return 0;
+	}
+}
+
+static enum v4l2_fwnode_orientation cio2_bridge_parse_orientation(struct cio2_sensor *sensor)
+{
+	switch (sensor->pld->panel) {
+	case ACPI_PLD_PANEL_FRONT:
+		return V4L2_FWNODE_ORIENTATION_FRONT;
+	case ACPI_PLD_PANEL_BACK:
+		return V4L2_FWNODE_ORIENTATION_BACK;
+	case ACPI_PLD_PANEL_TOP:
+	case ACPI_PLD_PANEL_LEFT:
+	case ACPI_PLD_PANEL_RIGHT:
+	case ACPI_PLD_PANEL_UNKNOWN:
+		return V4L2_FWNODE_ORIENTATION_EXTERNAL;
+	default:
+		dev_warn(&sensor->adev->dev, "Unknown _PLD panel value %d\n",
+			 sensor->pld->panel);
+		return V4L2_FWNODE_ORIENTATION_EXTERNAL;
+	}
+}
+
+static void cio2_bridge_create_fwnode_properties(
+	struct cio2_sensor *sensor,
+	struct cio2_bridge *bridge,
+	const struct cio2_sensor_config *cfg)
+{
+	u32 rotation;
+	enum v4l2_fwnode_orientation orientation;
+
+	rotation = cio2_bridge_parse_rotation(sensor);
+	orientation = cio2_bridge_parse_orientation(sensor);
+
+	sensor->prop_names = prop_names;
+
+	sensor->local_ref[0] = SOFTWARE_NODE_REFERENCE(&sensor->swnodes[SWNODE_CIO2_ENDPOINT]);
+	sensor->remote_ref[0] = SOFTWARE_NODE_REFERENCE(&sensor->swnodes[SWNODE_SENSOR_ENDPOINT]);
+
+	sensor->dev_properties[0] = PROPERTY_ENTRY_U32(
+					sensor->prop_names.clock_frequency,
+					sensor->ssdb.mclkspeed);
+	sensor->dev_properties[1] = PROPERTY_ENTRY_U32(
+					sensor->prop_names.rotation,
+					rotation);
+	sensor->dev_properties[2] = PROPERTY_ENTRY_U32(
+					sensor->prop_names.orientation,
+					orientation);
+	if (sensor->ssdb.vcmtype) {
+		sensor->vcm_ref[0] =
+			SOFTWARE_NODE_REFERENCE(&sensor->swnodes[SWNODE_VCM]);
+		sensor->dev_properties[3] =
+			PROPERTY_ENTRY_REF_ARRAY("lens-focus", sensor->vcm_ref);
+	}
+
+	sensor->ep_properties[0] = PROPERTY_ENTRY_U32(
+					sensor->prop_names.bus_type,
+					V4L2_FWNODE_BUS_TYPE_CSI2_DPHY);
+	sensor->ep_properties[1] = PROPERTY_ENTRY_U32_ARRAY_LEN(
+					sensor->prop_names.data_lanes,
+					bridge->data_lanes,
+					sensor->ssdb.lanes);
+	sensor->ep_properties[2] = PROPERTY_ENTRY_REF_ARRAY(
+					sensor->prop_names.remote_endpoint,
+					sensor->local_ref);
+
+	if (cfg->nr_link_freqs > 0)
+		sensor->ep_properties[3] = PROPERTY_ENTRY_U64_ARRAY_LEN(
+			sensor->prop_names.link_frequencies,
+			cfg->link_freqs,
+			cfg->nr_link_freqs);
+
+	sensor->cio2_properties[0] = PROPERTY_ENTRY_U32_ARRAY_LEN(
+					sensor->prop_names.data_lanes,
+					bridge->data_lanes,
+					sensor->ssdb.lanes);
+	sensor->cio2_properties[1] = PROPERTY_ENTRY_REF_ARRAY(
+					sensor->prop_names.remote_endpoint,
+					sensor->remote_ref);
+}
+
+static void cio2_bridge_init_swnode_names(struct cio2_sensor *sensor)
+{
+	snprintf(sensor->node_names.remote_port,
+		 sizeof(sensor->node_names.remote_port),
+		 SWNODE_GRAPH_PORT_NAME_FMT, sensor->ssdb.link);
+	snprintf(sensor->node_names.port,
+		 sizeof(sensor->node_names.port),
+		 SWNODE_GRAPH_PORT_NAME_FMT, 0); /* Always port 0 */
+	snprintf(sensor->node_names.endpoint,
+		 sizeof(sensor->node_names.endpoint),
+		 SWNODE_GRAPH_ENDPOINT_NAME_FMT, 0); /* And endpoint 0 */
+}
+
+static void cio2_bridge_create_connection_swnodes(struct cio2_bridge *bridge,
+						  struct cio2_sensor *sensor)
+{
+	struct software_node *nodes = sensor->swnodes;
+
+	cio2_bridge_init_swnode_names(sensor);
+
+	nodes[SWNODE_SENSOR_HID] = NODE_SENSOR(sensor->name,
+					       sensor->dev_properties);
+	nodes[SWNODE_SENSOR_PORT] = NODE_PORT(sensor->node_names.port,
+					      &nodes[SWNODE_SENSOR_HID]);
+	nodes[SWNODE_SENSOR_ENDPOINT] = NODE_ENDPOINT(
+						sensor->node_names.endpoint,
+						&nodes[SWNODE_SENSOR_PORT],
+						sensor->ep_properties);
+	nodes[SWNODE_CIO2_PORT] = NODE_PORT(sensor->node_names.remote_port,
+					    &bridge->cio2_hid_node);
+	nodes[SWNODE_CIO2_ENDPOINT] = NODE_ENDPOINT(
+						sensor->node_names.endpoint,
+						&nodes[SWNODE_CIO2_PORT],
+						sensor->cio2_properties);
+	if (sensor->ssdb.vcmtype)
+		nodes[SWNODE_VCM] =
+			NODE_VCM(cio2_vcm_types[sensor->ssdb.vcmtype - 1]);
+}
+
+static void cio2_bridge_instantiate_vcm_i2c_client(struct cio2_sensor *sensor)
+{
+	struct i2c_board_info board_info = { };
+	char name[16];
+
+	if (!sensor->ssdb.vcmtype)
+		return;
+
+	snprintf(name, sizeof(name), "%s-VCM", acpi_dev_name(sensor->adev));
+	board_info.dev_name = name;
+	strscpy(board_info.type, cio2_vcm_types[sensor->ssdb.vcmtype - 1],
+		ARRAY_SIZE(board_info.type));
+	board_info.swnode = &sensor->swnodes[SWNODE_VCM];
+
+	sensor->vcm_i2c_client =
+		i2c_acpi_new_device_by_fwnode(acpi_fwnode_handle(sensor->adev),
+					      1, &board_info);
+	if (IS_ERR(sensor->vcm_i2c_client)) {
+		dev_warn(&sensor->adev->dev, "Error instantiation VCM i2c-client: %ld\n",
+			 PTR_ERR(sensor->vcm_i2c_client));
+		sensor->vcm_i2c_client = NULL;
+	}
+}
+
+static void cio2_bridge_unregister_sensors(struct cio2_bridge *bridge)
+{
+	struct cio2_sensor *sensor;
+	unsigned int i;
+
+	for (i = 0; i < bridge->n_sensors; i++) {
+		sensor = &bridge->sensors[i];
+		software_node_unregister_nodes(sensor->swnodes);
+		ACPI_FREE(sensor->pld);
+		acpi_dev_put(sensor->adev);
+		i2c_unregister_device(sensor->vcm_i2c_client);
+	}
+}
+
+static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg,
+				      struct cio2_bridge *bridge,
+				      struct pci_dev *cio2)
+{
+	struct fwnode_handle *fwnode;
+	struct cio2_sensor *sensor;
+	struct acpi_device *adev;
+	acpi_status status;
+	int ret;
+
+	for_each_acpi_dev_match(adev, cfg->hid, NULL, -1) {
+		if (!adev->status.enabled)
+			continue;
+
+		if (bridge->n_sensors >= CIO2_NUM_PORTS) {
+			acpi_dev_put(adev);
+			dev_err(&cio2->dev, "Exceeded available CIO2 ports\n");
+			return -EINVAL;
+		}
+
+		sensor = &bridge->sensors[bridge->n_sensors];
+		strscpy(sensor->name, cfg->hid, sizeof(sensor->name));
+
+		ret = cio2_bridge_read_acpi_buffer(adev, "SSDB",
+						   &sensor->ssdb,
+						   sizeof(sensor->ssdb));
+		if (ret)
+			goto err_put_adev;
+
+		if (sensor->ssdb.vcmtype > ARRAY_SIZE(cio2_vcm_types)) {
+			dev_warn(&adev->dev, "Unknown VCM type %d\n",
+				 sensor->ssdb.vcmtype);
+			sensor->ssdb.vcmtype = 0;
+		}
+
+		status = acpi_get_physical_device_location(adev->handle, &sensor->pld);
+		if (ACPI_FAILURE(status)) {
+			ret = -ENODEV;
+			goto err_put_adev;
+		}
+
+		if (sensor->ssdb.lanes > CIO2_MAX_LANES) {
+			dev_err(&adev->dev,
+				"Number of lanes in SSDB is invalid\n");
+			ret = -EINVAL;
+			goto err_free_pld;
+		}
+
+		cio2_bridge_create_fwnode_properties(sensor, bridge, cfg);
+		cio2_bridge_create_connection_swnodes(bridge, sensor);
+
+		ret = software_node_register_nodes(sensor->swnodes);
+		if (ret)
+			goto err_free_pld;
+
+		fwnode = software_node_fwnode(&sensor->swnodes[
+						      SWNODE_SENSOR_HID]);
+		if (!fwnode) {
+			ret = -ENODEV;
+			goto err_free_swnodes;
+		}
+
+		sensor->adev = acpi_dev_get(adev);
+		adev->fwnode.secondary = fwnode;
+
+		cio2_bridge_instantiate_vcm_i2c_client(sensor);
+
+		dev_info(&cio2->dev, "Found supported sensor %s\n",
+			 acpi_dev_name(adev));
+
+		bridge->n_sensors++;
+	}
+
+	return 0;
+
+err_free_swnodes:
+	software_node_unregister_nodes(sensor->swnodes);
+err_free_pld:
+	ACPI_FREE(sensor->pld);
+err_put_adev:
+	acpi_dev_put(adev);
+	return ret;
+}
+
+static int cio2_bridge_connect_sensors(struct cio2_bridge *bridge,
+				       struct pci_dev *cio2)
+{
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < ARRAY_SIZE(cio2_supported_sensors); i++) {
+		const struct cio2_sensor_config *cfg =
+			&cio2_supported_sensors[i];
+
+		ret = cio2_bridge_connect_sensor(cfg, bridge, cio2);
+		if (ret)
+			goto err_unregister_sensors;
+	}
+
+	return 0;
+
+err_unregister_sensors:
+	cio2_bridge_unregister_sensors(bridge);
+	return ret;
+}
+
+/*
+ * The VCM cannot be probed until the PMIC is completely setup. We cannot rely
+ * on -EPROBE_DEFER for this, since the consumer<->supplier relations between
+ * the VCM and regulators/clks are not described in ACPI, instead they are
+ * passed as board-data to the PMIC drivers. Since -PROBE_DEFER does not work
+ * for the clks/regulators the VCM i2c-clients must not be instantiated until
+ * the PMIC is fully setup.
+ *
+ * The sensor/VCM ACPI device has an ACPI _DEP on the PMIC, check this using the
+ * acpi_dev_ready_for_enumeration() helper, like the i2c-core-acpi code does
+ * for the sensors.
+ */
+static int cio2_bridge_sensors_are_ready(void)
+{
+	struct acpi_device *adev;
+	bool ready = true;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(cio2_supported_sensors); i++) {
+		const struct cio2_sensor_config *cfg =
+			&cio2_supported_sensors[i];
+
+		for_each_acpi_dev_match(adev, cfg->hid, NULL, -1) {
+			if (!adev->status.enabled)
+				continue;
+
+			if (!acpi_dev_ready_for_enumeration(adev))
+				ready = false;
+		}
+	}
+
+	return ready;
+}
+
+int cio2_bridge_init(struct pci_dev *cio2)
+{
+	struct device *dev = &cio2->dev;
+	struct fwnode_handle *fwnode;
+	struct cio2_bridge *bridge;
+	unsigned int i;
+	int ret;
+
+	if (!cio2_bridge_sensors_are_ready())
+		return -EPROBE_DEFER;
+
+	bridge = kzalloc(sizeof(*bridge), GFP_KERNEL);
+	if (!bridge)
+		return -ENOMEM;
+
+	strscpy(bridge->cio2_node_name, CIO2_HID,
+		sizeof(bridge->cio2_node_name));
+	bridge->cio2_hid_node.name = bridge->cio2_node_name;
+
+	ret = software_node_register(&bridge->cio2_hid_node);
+	if (ret < 0) {
+		dev_err(dev, "Failed to register the CIO2 HID node\n");
+		goto err_free_bridge;
+	}
+
+	/*
+	 * Map the lane arrangement, which is fixed for the IPU3 (meaning we
+	 * only need one, rather than one per sensor). We include it as a
+	 * member of the struct cio2_bridge rather than a global variable so
+	 * that it survives if the module is unloaded along with the rest of
+	 * the struct.
+	 */
+	for (i = 0; i < CIO2_MAX_LANES; i++)
+		bridge->data_lanes[i] = i + 1;
+
+	ret = cio2_bridge_connect_sensors(bridge, cio2);
+	if (ret || bridge->n_sensors == 0)
+		goto err_unregister_cio2;
+
+	dev_info(dev, "Connected %d cameras\n", bridge->n_sensors);
+
+	fwnode = software_node_fwnode(&bridge->cio2_hid_node);
+	if (!fwnode) {
+		dev_err(dev, "Error getting fwnode from cio2 software_node\n");
+		ret = -ENODEV;
+		goto err_unregister_sensors;
+	}
+
+	set_secondary_fwnode(dev, fwnode);
+
+	return 0;
+
+err_unregister_sensors:
+	cio2_bridge_unregister_sensors(bridge);
+err_unregister_cio2:
+	software_node_unregister(&bridge->cio2_hid_node);
+err_free_bridge:
+	kfree(bridge);
+
+	return ret;
+}
diff --git a/drivers/media/pci/intel/ipu3/cio2-bridge.h b/drivers/media/pci/intel/ipu3/cio2-bridge.h
new file mode 100644
index 000000000..4418cbd08
--- /dev/null
+++ b/drivers/media/pci/intel/ipu3/cio2-bridge.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Author: Dan Scally <djrscally@gmail.com> */
+#ifndef __CIO2_BRIDGE_H
+#define __CIO2_BRIDGE_H
+
+#include <linux/property.h>
+#include <linux/types.h>
+
+#include "ipu3-cio2.h"
+
+struct i2c_client;
+
+#define CIO2_HID				"INT343E"
+#define CIO2_MAX_LANES				4
+#define MAX_NUM_LINK_FREQS			3
+
+/* Values are educated guesses as we don't have a spec */
+#define CIO2_SENSOR_ROTATION_NORMAL		0
+#define CIO2_SENSOR_ROTATION_INVERTED		1
+
+#define CIO2_SENSOR_CONFIG(_HID, _NR, ...)	\
+	(const struct cio2_sensor_config) {	\
+		.hid = _HID,			\
+		.nr_link_freqs = _NR,		\
+		.link_freqs = { __VA_ARGS__ }	\
+	}
+
+#define NODE_SENSOR(_HID, _PROPS)		\
+	(const struct software_node) {		\
+		.name = _HID,			\
+		.properties = _PROPS,		\
+	}
+
+#define NODE_PORT(_PORT, _SENSOR_NODE)		\
+	(const struct software_node) {		\
+		.name = _PORT,			\
+		.parent = _SENSOR_NODE,		\
+	}
+
+#define NODE_ENDPOINT(_EP, _PORT, _PROPS)	\
+	(const struct software_node) {		\
+		.name = _EP,			\
+		.parent = _PORT,		\
+		.properties = _PROPS,		\
+	}
+
+#define NODE_VCM(_TYPE)				\
+	(const struct software_node) {		\
+		.name = _TYPE,			\
+	}
+
+enum cio2_sensor_swnodes {
+	SWNODE_SENSOR_HID,
+	SWNODE_SENSOR_PORT,
+	SWNODE_SENSOR_ENDPOINT,
+	SWNODE_CIO2_PORT,
+	SWNODE_CIO2_ENDPOINT,
+	/* Must be last because it is optional / maybe empty */
+	SWNODE_VCM,
+	SWNODE_COUNT
+};
+
+/* Data representation as it is in ACPI SSDB buffer */
+struct cio2_sensor_ssdb {
+	u8 version;
+	u8 sku;
+	u8 guid_csi2[16];
+	u8 devfunction;
+	u8 bus;
+	u32 dphylinkenfuses;
+	u32 clockdiv;
+	u8 link;
+	u8 lanes;
+	u32 csiparams[10];
+	u32 maxlanespeed;
+	u8 sensorcalibfileidx;
+	u8 sensorcalibfileidxInMBZ[3];
+	u8 romtype;
+	u8 vcmtype;
+	u8 platforminfo;
+	u8 platformsubinfo;
+	u8 flash;
+	u8 privacyled;
+	u8 degree;
+	u8 mipilinkdefined;
+	u32 mclkspeed;
+	u8 controllogicid;
+	u8 reserved1[3];
+	u8 mclkport;
+	u8 reserved2[13];
+} __packed;
+
+struct cio2_property_names {
+	char clock_frequency[16];
+	char rotation[9];
+	char orientation[12];
+	char bus_type[9];
+	char data_lanes[11];
+	char remote_endpoint[16];
+	char link_frequencies[17];
+};
+
+struct cio2_node_names {
+	char port[7];
+	char endpoint[11];
+	char remote_port[7];
+};
+
+struct cio2_sensor_config {
+	const char *hid;
+	const u8 nr_link_freqs;
+	const u64 link_freqs[MAX_NUM_LINK_FREQS];
+};
+
+struct cio2_sensor {
+	char name[ACPI_ID_LEN];
+	struct acpi_device *adev;
+	struct i2c_client *vcm_i2c_client;
+
+	/* SWNODE_COUNT + 1 for terminating empty node */
+	struct software_node swnodes[SWNODE_COUNT + 1];
+	struct cio2_node_names node_names;
+
+	struct cio2_sensor_ssdb ssdb;
+	struct acpi_pld_info *pld;
+
+	struct cio2_property_names prop_names;
+	struct property_entry ep_properties[5];
+	struct property_entry dev_properties[5];
+	struct property_entry cio2_properties[3];
+	struct software_node_ref_args local_ref[1];
+	struct software_node_ref_args remote_ref[1];
+	struct software_node_ref_args vcm_ref[1];
+};
+
+struct cio2_bridge {
+	char cio2_node_name[ACPI_ID_LEN];
+	struct software_node cio2_hid_node;
+	u32 data_lanes[4];
+	unsigned int n_sensors;
+	struct cio2_sensor sensors[CIO2_NUM_PORTS];
+};
+
+#endif
diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
new file mode 100644
index 000000000..1bbe58b24
--- /dev/null
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c
@@ -0,0 +1,2061 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017,2020 Intel Corporation
+ *
+ * Based partially on Intel IPU4 driver written by
+ *  Sakari Ailus <sakari.ailus@linux.intel.com>
+ *  Samu Onkalo <samu.onkalo@intel.com>
+ *  Jouni Högander <jouni.hogander@intel.com>
+ *  Jouni Ukkonen <jouni.ukkonen@intel.com>
+ *  Antti Laakso <antti.laakso@intel.com>
+ * et al.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pfn.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/vmalloc.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-dma-sg.h>
+
+#include "ipu3-cio2.h"
+
+struct ipu3_cio2_fmt {
+	u32 mbus_code;
+	u32 fourcc;
+	u8 mipicode;
+	u8 bpp;
+};
+
+/*
+ * These are raw formats used in Intel's third generation of
+ * Image Processing Unit known as IPU3.
+ * 10bit raw bayer packed, 32 bytes for every 25 pixels,
+ * last LSB 6 bits unused.
+ */
+static const struct ipu3_cio2_fmt formats[] = {
+	{	/* put default entry at beginning */
+		.mbus_code	= MEDIA_BUS_FMT_SGRBG10_1X10,
+		.fourcc		= V4L2_PIX_FMT_IPU3_SGRBG10,
+		.mipicode	= 0x2b,
+		.bpp		= 10,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SGBRG10_1X10,
+		.fourcc		= V4L2_PIX_FMT_IPU3_SGBRG10,
+		.mipicode	= 0x2b,
+		.bpp		= 10,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SBGGR10_1X10,
+		.fourcc		= V4L2_PIX_FMT_IPU3_SBGGR10,
+		.mipicode	= 0x2b,
+		.bpp		= 10,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SRGGB10_1X10,
+		.fourcc		= V4L2_PIX_FMT_IPU3_SRGGB10,
+		.mipicode	= 0x2b,
+		.bpp		= 10,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_Y10_1X10,
+		.fourcc		= V4L2_PIX_FMT_IPU3_Y10,
+		.mipicode	= 0x2b,
+		.bpp		= 10,
+	},
+};
+
+/*
+ * cio2_find_format - lookup color format by fourcc or/and media bus code
+ * @pixelformat: fourcc to match, ignored if null
+ * @mbus_code: media bus code to match, ignored if null
+ */
+static const struct ipu3_cio2_fmt *cio2_find_format(const u32 *pixelformat,
+						    const u32 *mbus_code)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(formats); i++) {
+		if (pixelformat && *pixelformat != formats[i].fourcc)
+			continue;
+		if (mbus_code && *mbus_code != formats[i].mbus_code)
+			continue;
+
+		return &formats[i];
+	}
+
+	return NULL;
+}
+
+static inline u32 cio2_bytesperline(const unsigned int width)
+{
+	/*
+	 * 64 bytes for every 50 pixels, the line length
+	 * in bytes is multiple of 64 (line end alignment).
+	 */
+	return DIV_ROUND_UP(width, 50) * 64;
+}
+
+/**************** FBPT operations ****************/
+
+static void cio2_fbpt_exit_dummy(struct cio2_device *cio2)
+{
+	struct device *dev = &cio2->pci_dev->dev;
+
+	if (cio2->dummy_lop) {
+		dma_free_coherent(dev, PAGE_SIZE, cio2->dummy_lop,
+				  cio2->dummy_lop_bus_addr);
+		cio2->dummy_lop = NULL;
+	}
+	if (cio2->dummy_page) {
+		dma_free_coherent(dev, PAGE_SIZE, cio2->dummy_page,
+				  cio2->dummy_page_bus_addr);
+		cio2->dummy_page = NULL;
+	}
+}
+
+static int cio2_fbpt_init_dummy(struct cio2_device *cio2)
+{
+	struct device *dev = &cio2->pci_dev->dev;
+	unsigned int i;
+
+	cio2->dummy_page = dma_alloc_coherent(dev, PAGE_SIZE,
+					      &cio2->dummy_page_bus_addr,
+					      GFP_KERNEL);
+	cio2->dummy_lop = dma_alloc_coherent(dev, PAGE_SIZE,
+					     &cio2->dummy_lop_bus_addr,
+					     GFP_KERNEL);
+	if (!cio2->dummy_page || !cio2->dummy_lop) {
+		cio2_fbpt_exit_dummy(cio2);
+		return -ENOMEM;
+	}
+	/*
+	 * List of Pointers(LOP) contains 1024x32b pointers to 4KB page each
+	 * Initialize each entry to dummy_page bus base address.
+	 */
+	for (i = 0; i < CIO2_LOP_ENTRIES; i++)
+		cio2->dummy_lop[i] = PFN_DOWN(cio2->dummy_page_bus_addr);
+
+	return 0;
+}
+
+static void cio2_fbpt_entry_enable(struct cio2_device *cio2,
+				   struct cio2_fbpt_entry entry[CIO2_MAX_LOPS])
+{
+	/*
+	 * The CPU first initializes some fields in fbpt, then sets
+	 * the VALID bit, this barrier is to ensure that the DMA(device)
+	 * does not see the VALID bit enabled before other fields are
+	 * initialized; otherwise it could lead to havoc.
+	 */
+	dma_wmb();
+
+	/*
+	 * Request interrupts for start and completion
+	 * Valid bit is applicable only to 1st entry
+	 */
+	entry[0].first_entry.ctrl = CIO2_FBPT_CTRL_VALID |
+		CIO2_FBPT_CTRL_IOC | CIO2_FBPT_CTRL_IOS;
+}
+
+/* Initialize fpbt entries to point to dummy frame */
+static void cio2_fbpt_entry_init_dummy(struct cio2_device *cio2,
+				       struct cio2_fbpt_entry
+				       entry[CIO2_MAX_LOPS])
+{
+	unsigned int i;
+
+	entry[0].first_entry.first_page_offset = 0;
+	entry[1].second_entry.num_of_pages = CIO2_LOP_ENTRIES * CIO2_MAX_LOPS;
+	entry[1].second_entry.last_page_available_bytes = PAGE_SIZE - 1;
+
+	for (i = 0; i < CIO2_MAX_LOPS; i++)
+		entry[i].lop_page_addr = PFN_DOWN(cio2->dummy_lop_bus_addr);
+
+	cio2_fbpt_entry_enable(cio2, entry);
+}
+
+/* Initialize fpbt entries to point to a given buffer */
+static void cio2_fbpt_entry_init_buf(struct cio2_device *cio2,
+				     struct cio2_buffer *b,
+				     struct cio2_fbpt_entry
+				     entry[CIO2_MAX_LOPS])
+{
+	struct vb2_buffer *vb = &b->vbb.vb2_buf;
+	unsigned int length = vb->planes[0].length;
+	int remaining, i;
+
+	entry[0].first_entry.first_page_offset = b->offset;
+	remaining = length + entry[0].first_entry.first_page_offset;
+	entry[1].second_entry.num_of_pages = PFN_UP(remaining);
+	/*
+	 * last_page_available_bytes has the offset of the last byte in the
+	 * last page which is still accessible by DMA. DMA cannot access
+	 * beyond this point. Valid range for this is from 0 to 4095.
+	 * 0 indicates 1st byte in the page is DMA accessible.
+	 * 4095 (PAGE_SIZE - 1) means every single byte in the last page
+	 * is available for DMA transfer.
+	 */
+	remaining = offset_in_page(remaining) ?: PAGE_SIZE;
+	entry[1].second_entry.last_page_available_bytes = remaining - 1;
+	/* Fill FBPT */
+	remaining = length;
+	i = 0;
+	while (remaining > 0) {
+		entry->lop_page_addr = PFN_DOWN(b->lop_bus_addr[i]);
+		remaining -= CIO2_LOP_ENTRIES * PAGE_SIZE;
+		entry++;
+		i++;
+	}
+
+	/*
+	 * The first not meaningful FBPT entry should point to a valid LOP
+	 */
+	entry->lop_page_addr = PFN_DOWN(cio2->dummy_lop_bus_addr);
+
+	cio2_fbpt_entry_enable(cio2, entry);
+}
+
+static int cio2_fbpt_init(struct cio2_device *cio2, struct cio2_queue *q)
+{
+	struct device *dev = &cio2->pci_dev->dev;
+
+	q->fbpt = dma_alloc_coherent(dev, CIO2_FBPT_SIZE, &q->fbpt_bus_addr,
+				     GFP_KERNEL);
+	if (!q->fbpt)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void cio2_fbpt_exit(struct cio2_queue *q, struct device *dev)
+{
+	dma_free_coherent(dev, CIO2_FBPT_SIZE, q->fbpt, q->fbpt_bus_addr);
+}
+
+/**************** CSI2 hardware setup ****************/
+
+/*
+ * The CSI2 receiver has several parameters affecting
+ * the receiver timings. These depend on the MIPI bus frequency
+ * F in Hz (sensor transmitter rate) as follows:
+ *     register value = (A/1e9 + B * UI) / COUNT_ACC
+ * where
+ *      UI = 1 / (2 * F) in seconds
+ *      COUNT_ACC = counter accuracy in seconds
+ *      For IPU3 COUNT_ACC = 0.0625
+ *
+ * A and B are coefficients from the table below,
+ * depending whether the register minimum or maximum value is
+ * calculated.
+ *                                     Minimum     Maximum
+ * Clock lane                          A     B     A     B
+ * reg_rx_csi_dly_cnt_termen_clane     0     0    38     0
+ * reg_rx_csi_dly_cnt_settle_clane    95    -8   300   -16
+ * Data lanes
+ * reg_rx_csi_dly_cnt_termen_dlane0    0     0    35     4
+ * reg_rx_csi_dly_cnt_settle_dlane0   85    -2   145    -6
+ * reg_rx_csi_dly_cnt_termen_dlane1    0     0    35     4
+ * reg_rx_csi_dly_cnt_settle_dlane1   85    -2   145    -6
+ * reg_rx_csi_dly_cnt_termen_dlane2    0     0    35     4
+ * reg_rx_csi_dly_cnt_settle_dlane2   85    -2   145    -6
+ * reg_rx_csi_dly_cnt_termen_dlane3    0     0    35     4
+ * reg_rx_csi_dly_cnt_settle_dlane3   85    -2   145    -6
+ *
+ * We use the minimum values of both A and B.
+ */
+
+/*
+ * shift for keeping value range suitable for 32-bit integer arithmetic
+ */
+#define LIMIT_SHIFT	8
+
+static s32 cio2_rx_timing(s32 a, s32 b, s64 freq, int def)
+{
+	const u32 accinv = 16; /* invert of counter resolution */
+	const u32 uiinv = 500000000; /* 1e9 / 2 */
+	s32 r;
+
+	freq >>= LIMIT_SHIFT;
+
+	if (WARN_ON(freq <= 0 || freq > S32_MAX))
+		return def;
+	/*
+	 * b could be 0, -2 or -8, so |accinv * b| is always
+	 * less than (1 << ds) and thus |r| < 500000000.
+	 */
+	r = accinv * b * (uiinv >> LIMIT_SHIFT);
+	r = r / (s32)freq;
+	/* max value of a is 95 */
+	r += accinv * a;
+
+	return r;
+};
+
+/* Calculate the delay value for termination enable of clock lane HS Rx */
+static int cio2_csi2_calc_timing(struct cio2_device *cio2, struct cio2_queue *q,
+				 struct cio2_csi2_timing *timing,
+				 unsigned int bpp, unsigned int lanes)
+{
+	struct device *dev = &cio2->pci_dev->dev;
+	s64 freq;
+
+	if (!q->sensor)
+		return -ENODEV;
+
+	freq = v4l2_get_link_freq(q->sensor->ctrl_handler, bpp, lanes * 2);
+	if (freq < 0) {
+		dev_err(dev, "error %lld, invalid link_freq\n", freq);
+		return freq;
+	}
+
+	timing->clk_termen = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_A,
+					    CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_B,
+					    freq,
+					    CIO2_CSIRX_DLY_CNT_TERMEN_DEFAULT);
+	timing->clk_settle = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_A,
+					    CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_B,
+					    freq,
+					    CIO2_CSIRX_DLY_CNT_SETTLE_DEFAULT);
+	timing->dat_termen = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_A,
+					    CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_B,
+					    freq,
+					    CIO2_CSIRX_DLY_CNT_TERMEN_DEFAULT);
+	timing->dat_settle = cio2_rx_timing(CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_A,
+					    CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_B,
+					    freq,
+					    CIO2_CSIRX_DLY_CNT_SETTLE_DEFAULT);
+
+	dev_dbg(dev, "freq ct value is %d\n", timing->clk_termen);
+	dev_dbg(dev, "freq cs value is %d\n", timing->clk_settle);
+	dev_dbg(dev, "freq dt value is %d\n", timing->dat_termen);
+	dev_dbg(dev, "freq ds value is %d\n", timing->dat_settle);
+
+	return 0;
+};
+
+static int cio2_hw_init(struct cio2_device *cio2, struct cio2_queue *q)
+{
+	static const int NUM_VCS = 4;
+	static const int SID;	/* Stream id */
+	static const int ENTRY;
+	static const int FBPT_WIDTH = DIV_ROUND_UP(CIO2_MAX_LOPS,
+					CIO2_FBPT_SUBENTRY_UNIT);
+	const u32 num_buffers1 = CIO2_MAX_BUFFERS - 1;
+	const struct ipu3_cio2_fmt *fmt;
+	void __iomem *const base = cio2->base;
+	u8 lanes, csi2bus = q->csi2.port;
+	u8 sensor_vc = SENSOR_VIR_CH_DFLT;
+	struct cio2_csi2_timing timing = { 0 };
+	int i, r;
+
+	fmt = cio2_find_format(NULL, &q->subdev_fmt.code);
+	if (!fmt)
+		return -EINVAL;
+
+	lanes = q->csi2.lanes;
+
+	r = cio2_csi2_calc_timing(cio2, q, &timing, fmt->bpp, lanes);
+	if (r)
+		return r;
+
+	writel(timing.clk_termen, q->csi_rx_base +
+		CIO2_REG_CSIRX_DLY_CNT_TERMEN(CIO2_CSIRX_DLY_CNT_CLANE_IDX));
+	writel(timing.clk_settle, q->csi_rx_base +
+		CIO2_REG_CSIRX_DLY_CNT_SETTLE(CIO2_CSIRX_DLY_CNT_CLANE_IDX));
+
+	for (i = 0; i < lanes; i++) {
+		writel(timing.dat_termen, q->csi_rx_base +
+			CIO2_REG_CSIRX_DLY_CNT_TERMEN(i));
+		writel(timing.dat_settle, q->csi_rx_base +
+			CIO2_REG_CSIRX_DLY_CNT_SETTLE(i));
+	}
+
+	writel(CIO2_PBM_WMCTRL1_MIN_2CK |
+	       CIO2_PBM_WMCTRL1_MID1_2CK |
+	       CIO2_PBM_WMCTRL1_MID2_2CK, base + CIO2_REG_PBM_WMCTRL1);
+	writel(CIO2_PBM_WMCTRL2_HWM_2CK << CIO2_PBM_WMCTRL2_HWM_2CK_SHIFT |
+	       CIO2_PBM_WMCTRL2_LWM_2CK << CIO2_PBM_WMCTRL2_LWM_2CK_SHIFT |
+	       CIO2_PBM_WMCTRL2_OBFFWM_2CK <<
+	       CIO2_PBM_WMCTRL2_OBFFWM_2CK_SHIFT |
+	       CIO2_PBM_WMCTRL2_TRANSDYN << CIO2_PBM_WMCTRL2_TRANSDYN_SHIFT |
+	       CIO2_PBM_WMCTRL2_OBFF_MEM_EN, base + CIO2_REG_PBM_WMCTRL2);
+	writel(CIO2_PBM_ARB_CTRL_LANES_DIV <<
+	       CIO2_PBM_ARB_CTRL_LANES_DIV_SHIFT |
+	       CIO2_PBM_ARB_CTRL_LE_EN |
+	       CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN <<
+	       CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN_SHIFT |
+	       CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP <<
+	       CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP_SHIFT,
+	       base + CIO2_REG_PBM_ARB_CTRL);
+	writel(CIO2_CSIRX_STATUS_DLANE_HS_MASK,
+	       q->csi_rx_base + CIO2_REG_CSIRX_STATUS_DLANE_HS);
+	writel(CIO2_CSIRX_STATUS_DLANE_LP_MASK,
+	       q->csi_rx_base + CIO2_REG_CSIRX_STATUS_DLANE_LP);
+
+	writel(CIO2_FB_HPLL_FREQ, base + CIO2_REG_FB_HPLL_FREQ);
+	writel(CIO2_ISCLK_RATIO, base + CIO2_REG_ISCLK_RATIO);
+
+	/* Configure MIPI backend */
+	for (i = 0; i < NUM_VCS; i++)
+		writel(1, q->csi_rx_base + CIO2_REG_MIPIBE_SP_LUT_ENTRY(i));
+
+	/* There are 16 short packet LUT entry */
+	for (i = 0; i < 16; i++)
+		writel(CIO2_MIPIBE_LP_LUT_ENTRY_DISREGARD,
+		       q->csi_rx_base + CIO2_REG_MIPIBE_LP_LUT_ENTRY(i));
+	writel(CIO2_MIPIBE_GLOBAL_LUT_DISREGARD,
+	       q->csi_rx_base + CIO2_REG_MIPIBE_GLOBAL_LUT_DISREGARD);
+
+	writel(CIO2_INT_EN_EXT_IE_MASK, base + CIO2_REG_INT_EN_EXT_IE);
+	writel(CIO2_IRQCTRL_MASK, q->csi_rx_base + CIO2_REG_IRQCTRL_MASK);
+	writel(CIO2_IRQCTRL_MASK, q->csi_rx_base + CIO2_REG_IRQCTRL_ENABLE);
+	writel(0, q->csi_rx_base + CIO2_REG_IRQCTRL_EDGE);
+	writel(0, q->csi_rx_base + CIO2_REG_IRQCTRL_LEVEL_NOT_PULSE);
+	writel(CIO2_INT_EN_EXT_OE_MASK, base + CIO2_REG_INT_EN_EXT_OE);
+
+	writel(CIO2_REG_INT_EN_IRQ | CIO2_INT_IOC(CIO2_DMA_CHAN) |
+	       CIO2_REG_INT_EN_IOS(CIO2_DMA_CHAN),
+	       base + CIO2_REG_INT_EN);
+
+	writel((CIO2_PXM_PXF_FMT_CFG_BPP_10 | CIO2_PXM_PXF_FMT_CFG_PCK_64B)
+	       << CIO2_PXM_PXF_FMT_CFG_SID0_SHIFT,
+	       base + CIO2_REG_PXM_PXF_FMT_CFG0(csi2bus));
+	writel(SID << CIO2_MIPIBE_LP_LUT_ENTRY_SID_SHIFT |
+	       sensor_vc << CIO2_MIPIBE_LP_LUT_ENTRY_VC_SHIFT |
+	       fmt->mipicode << CIO2_MIPIBE_LP_LUT_ENTRY_FORMAT_TYPE_SHIFT,
+	       q->csi_rx_base + CIO2_REG_MIPIBE_LP_LUT_ENTRY(ENTRY));
+	writel(0, q->csi_rx_base + CIO2_REG_MIPIBE_COMP_FORMAT(sensor_vc));
+	writel(0, q->csi_rx_base + CIO2_REG_MIPIBE_FORCE_RAW8);
+	writel(0, base + CIO2_REG_PXM_SID2BID0(csi2bus));
+
+	writel(lanes, q->csi_rx_base + CIO2_REG_CSIRX_NOF_ENABLED_LANES);
+	writel(CIO2_CGC_PRIM_TGE |
+	       CIO2_CGC_SIDE_TGE |
+	       CIO2_CGC_XOSC_TGE |
+	       CIO2_CGC_D3I3_TGE |
+	       CIO2_CGC_CSI2_INTERFRAME_TGE |
+	       CIO2_CGC_CSI2_PORT_DCGE |
+	       CIO2_CGC_SIDE_DCGE |
+	       CIO2_CGC_PRIM_DCGE |
+	       CIO2_CGC_ROSC_DCGE |
+	       CIO2_CGC_XOSC_DCGE |
+	       CIO2_CGC_CLKGATE_HOLDOFF << CIO2_CGC_CLKGATE_HOLDOFF_SHIFT |
+	       CIO2_CGC_CSI_CLKGATE_HOLDOFF
+	       << CIO2_CGC_CSI_CLKGATE_HOLDOFF_SHIFT, base + CIO2_REG_CGC);
+	writel(CIO2_LTRCTRL_LTRDYNEN, base + CIO2_REG_LTRCTRL);
+	writel(CIO2_LTRVAL0_VAL << CIO2_LTRVAL02_VAL_SHIFT |
+	       CIO2_LTRVAL0_SCALE << CIO2_LTRVAL02_SCALE_SHIFT |
+	       CIO2_LTRVAL1_VAL << CIO2_LTRVAL13_VAL_SHIFT |
+	       CIO2_LTRVAL1_SCALE << CIO2_LTRVAL13_SCALE_SHIFT,
+	       base + CIO2_REG_LTRVAL01);
+	writel(CIO2_LTRVAL2_VAL << CIO2_LTRVAL02_VAL_SHIFT |
+	       CIO2_LTRVAL2_SCALE << CIO2_LTRVAL02_SCALE_SHIFT |
+	       CIO2_LTRVAL3_VAL << CIO2_LTRVAL13_VAL_SHIFT |
+	       CIO2_LTRVAL3_SCALE << CIO2_LTRVAL13_SCALE_SHIFT,
+	       base + CIO2_REG_LTRVAL23);
+
+	for (i = 0; i < CIO2_NUM_DMA_CHAN; i++) {
+		writel(0, base + CIO2_REG_CDMABA(i));
+		writel(0, base + CIO2_REG_CDMAC0(i));
+		writel(0, base + CIO2_REG_CDMAC1(i));
+	}
+
+	/* Enable DMA */
+	writel(PFN_DOWN(q->fbpt_bus_addr), base + CIO2_REG_CDMABA(CIO2_DMA_CHAN));
+
+	writel(num_buffers1 << CIO2_CDMAC0_FBPT_LEN_SHIFT |
+	       FBPT_WIDTH << CIO2_CDMAC0_FBPT_WIDTH_SHIFT |
+	       CIO2_CDMAC0_DMA_INTR_ON_FE |
+	       CIO2_CDMAC0_FBPT_UPDATE_FIFO_FULL |
+	       CIO2_CDMAC0_DMA_EN |
+	       CIO2_CDMAC0_DMA_INTR_ON_FS |
+	       CIO2_CDMAC0_DMA_HALTED, base + CIO2_REG_CDMAC0(CIO2_DMA_CHAN));
+
+	writel(1 << CIO2_CDMAC1_LINENUMUPDATE_SHIFT,
+	       base + CIO2_REG_CDMAC1(CIO2_DMA_CHAN));
+
+	writel(0, base + CIO2_REG_PBM_FOPN_ABORT);
+
+	writel(CIO2_PXM_FRF_CFG_CRC_TH << CIO2_PXM_FRF_CFG_CRC_TH_SHIFT |
+	       CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NR |
+	       CIO2_PXM_FRF_CFG_MSK_ECC_RE |
+	       CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NE,
+	       base + CIO2_REG_PXM_FRF_CFG(q->csi2.port));
+
+	/* Clear interrupts */
+	writel(CIO2_IRQCTRL_MASK, q->csi_rx_base + CIO2_REG_IRQCTRL_CLEAR);
+	writel(~0, base + CIO2_REG_INT_STS_EXT_OE);
+	writel(~0, base + CIO2_REG_INT_STS_EXT_IE);
+	writel(~0, base + CIO2_REG_INT_STS);
+
+	/* Enable devices, starting from the last device in the pipe */
+	writel(1, q->csi_rx_base + CIO2_REG_MIPIBE_ENABLE);
+	writel(1, q->csi_rx_base + CIO2_REG_CSIRX_ENABLE);
+
+	return 0;
+}
+
+static void cio2_hw_exit(struct cio2_device *cio2, struct cio2_queue *q)
+{
+	struct device *dev = &cio2->pci_dev->dev;
+	void __iomem *const base = cio2->base;
+	unsigned int i;
+	u32 value;
+	int ret;
+
+	/* Disable CSI receiver and MIPI backend devices */
+	writel(0, q->csi_rx_base + CIO2_REG_IRQCTRL_MASK);
+	writel(0, q->csi_rx_base + CIO2_REG_IRQCTRL_ENABLE);
+	writel(0, q->csi_rx_base + CIO2_REG_CSIRX_ENABLE);
+	writel(0, q->csi_rx_base + CIO2_REG_MIPIBE_ENABLE);
+
+	/* Halt DMA */
+	writel(0, base + CIO2_REG_CDMAC0(CIO2_DMA_CHAN));
+	ret = readl_poll_timeout(base + CIO2_REG_CDMAC0(CIO2_DMA_CHAN),
+				 value, value & CIO2_CDMAC0_DMA_HALTED,
+				 4000, 2000000);
+	if (ret)
+		dev_err(dev, "DMA %i can not be halted\n", CIO2_DMA_CHAN);
+
+	for (i = 0; i < CIO2_NUM_PORTS; i++) {
+		writel(readl(base + CIO2_REG_PXM_FRF_CFG(i)) |
+		       CIO2_PXM_FRF_CFG_ABORT, base + CIO2_REG_PXM_FRF_CFG(i));
+		writel(readl(base + CIO2_REG_PBM_FOPN_ABORT) |
+		       CIO2_PBM_FOPN_ABORT(i), base + CIO2_REG_PBM_FOPN_ABORT);
+	}
+}
+
+static void cio2_buffer_done(struct cio2_device *cio2, unsigned int dma_chan)
+{
+	struct device *dev = &cio2->pci_dev->dev;
+	struct cio2_queue *q = cio2->cur_queue;
+	struct cio2_fbpt_entry *entry;
+	u64 ns = ktime_get_ns();
+
+	if (dma_chan >= CIO2_QUEUES) {
+		dev_err(dev, "bad DMA channel %i\n", dma_chan);
+		return;
+	}
+
+	entry = &q->fbpt[q->bufs_first * CIO2_MAX_LOPS];
+	if (entry->first_entry.ctrl & CIO2_FBPT_CTRL_VALID) {
+		dev_warn(dev, "no ready buffers found on DMA channel %u\n",
+			 dma_chan);
+		return;
+	}
+
+	/* Find out which buffer(s) are ready */
+	do {
+		struct cio2_buffer *b;
+
+		b = q->bufs[q->bufs_first];
+		if (b) {
+			unsigned int received = entry[1].second_entry.num_of_bytes;
+			unsigned long payload =
+				vb2_get_plane_payload(&b->vbb.vb2_buf, 0);
+
+			q->bufs[q->bufs_first] = NULL;
+			atomic_dec(&q->bufs_queued);
+			dev_dbg(dev, "buffer %i done\n", b->vbb.vb2_buf.index);
+
+			b->vbb.vb2_buf.timestamp = ns;
+			b->vbb.field = V4L2_FIELD_NONE;
+			b->vbb.sequence = atomic_read(&q->frame_sequence);
+			if (payload != received)
+				dev_warn(dev,
+					 "payload length is %lu, received %u\n",
+					 payload, received);
+			vb2_buffer_done(&b->vbb.vb2_buf, VB2_BUF_STATE_DONE);
+		}
+		atomic_inc(&q->frame_sequence);
+		cio2_fbpt_entry_init_dummy(cio2, entry);
+		q->bufs_first = (q->bufs_first + 1) % CIO2_MAX_BUFFERS;
+		entry = &q->fbpt[q->bufs_first * CIO2_MAX_LOPS];
+	} while (!(entry->first_entry.ctrl & CIO2_FBPT_CTRL_VALID));
+}
+
+static void cio2_queue_event_sof(struct cio2_device *cio2, struct cio2_queue *q)
+{
+	/*
+	 * For the user space camera control algorithms it is essential
+	 * to know when the reception of a frame has begun. That's often
+	 * the best timing information to get from the hardware.
+	 */
+	struct v4l2_event event = {
+		.type = V4L2_EVENT_FRAME_SYNC,
+		.u.frame_sync.frame_sequence = atomic_read(&q->frame_sequence),
+	};
+
+	v4l2_event_queue(q->subdev.devnode, &event);
+}
+
+static const char *const cio2_irq_errs[] = {
+	"single packet header error corrected",
+	"multiple packet header errors detected",
+	"payload checksum (CRC) error",
+	"fifo overflow",
+	"reserved short packet data type detected",
+	"reserved long packet data type detected",
+	"incomplete long packet detected",
+	"frame sync error",
+	"line sync error",
+	"DPHY start of transmission error",
+	"DPHY synchronization error",
+	"escape mode error",
+	"escape mode trigger event",
+	"escape mode ultra-low power state for data lane(s)",
+	"escape mode ultra-low power state exit for clock lane",
+	"inter-frame short packet discarded",
+	"inter-frame long packet discarded",
+	"non-matching Long Packet stalled",
+};
+
+static void cio2_irq_log_irq_errs(struct device *dev, u8 port, u32 status)
+{
+	unsigned long csi2_status = status;
+	unsigned int i;
+
+	for_each_set_bit(i, &csi2_status, ARRAY_SIZE(cio2_irq_errs))
+		dev_err(dev, "CSI-2 receiver port %i: %s\n",
+			port, cio2_irq_errs[i]);
+
+	if (fls_long(csi2_status) >= ARRAY_SIZE(cio2_irq_errs))
+		dev_warn(dev, "unknown CSI2 error 0x%lx on port %i\n",
+			 csi2_status, port);
+}
+
+static const char *const cio2_port_errs[] = {
+	"ECC recoverable",
+	"DPHY not recoverable",
+	"ECC not recoverable",
+	"CRC error",
+	"INTERFRAMEDATA",
+	"PKT2SHORT",
+	"PKT2LONG",
+};
+
+static void cio2_irq_log_port_errs(struct device *dev, u8 port, u32 status)
+{
+	unsigned long port_status = status;
+	unsigned int i;
+
+	for_each_set_bit(i, &port_status, ARRAY_SIZE(cio2_port_errs))
+		dev_err(dev, "port %i error %s\n", port, cio2_port_errs[i]);
+}
+
+static void cio2_irq_handle_once(struct cio2_device *cio2, u32 int_status)
+{
+	struct device *dev = &cio2->pci_dev->dev;
+	void __iomem *const base = cio2->base;
+
+	if (int_status & CIO2_INT_IOOE) {
+		/*
+		 * Interrupt on Output Error:
+		 * 1) SRAM is full and FS received, or
+		 * 2) An invalid bit detected by DMA.
+		 */
+		u32 oe_status, oe_clear;
+
+		oe_clear = readl(base + CIO2_REG_INT_STS_EXT_OE);
+		oe_status = oe_clear;
+
+		if (oe_status & CIO2_INT_EXT_OE_DMAOE_MASK) {
+			dev_err(dev, "DMA output error: 0x%x\n",
+				(oe_status & CIO2_INT_EXT_OE_DMAOE_MASK)
+				>> CIO2_INT_EXT_OE_DMAOE_SHIFT);
+			oe_status &= ~CIO2_INT_EXT_OE_DMAOE_MASK;
+		}
+		if (oe_status & CIO2_INT_EXT_OE_OES_MASK) {
+			dev_err(dev, "DMA output error on CSI2 buses: 0x%x\n",
+				(oe_status & CIO2_INT_EXT_OE_OES_MASK)
+				>> CIO2_INT_EXT_OE_OES_SHIFT);
+			oe_status &= ~CIO2_INT_EXT_OE_OES_MASK;
+		}
+		writel(oe_clear, base + CIO2_REG_INT_STS_EXT_OE);
+		if (oe_status)
+			dev_warn(dev, "unknown interrupt 0x%x on OE\n",
+				 oe_status);
+		int_status &= ~CIO2_INT_IOOE;
+	}
+
+	if (int_status & CIO2_INT_IOC_MASK) {
+		/* DMA IO done -- frame ready */
+		u32 clr = 0;
+		unsigned int d;
+
+		for (d = 0; d < CIO2_NUM_DMA_CHAN; d++)
+			if (int_status & CIO2_INT_IOC(d)) {
+				clr |= CIO2_INT_IOC(d);
+				cio2_buffer_done(cio2, d);
+			}
+		int_status &= ~clr;
+	}
+
+	if (int_status & CIO2_INT_IOS_IOLN_MASK) {
+		/* DMA IO starts or reached specified line */
+		u32 clr = 0;
+		unsigned int d;
+
+		for (d = 0; d < CIO2_NUM_DMA_CHAN; d++)
+			if (int_status & CIO2_INT_IOS_IOLN(d)) {
+				clr |= CIO2_INT_IOS_IOLN(d);
+				if (d == CIO2_DMA_CHAN)
+					cio2_queue_event_sof(cio2,
+							     cio2->cur_queue);
+			}
+		int_status &= ~clr;
+	}
+
+	if (int_status & (CIO2_INT_IOIE | CIO2_INT_IOIRQ)) {
+		/* CSI2 receiver (error) interrupt */
+		unsigned int port;
+		u32 ie_status;
+
+		ie_status = readl(base + CIO2_REG_INT_STS_EXT_IE);
+
+		for (port = 0; port < CIO2_NUM_PORTS; port++) {
+			u32 port_status = (ie_status >> (port * 8)) & 0xff;
+
+			cio2_irq_log_port_errs(dev, port, port_status);
+
+			if (ie_status & CIO2_INT_EXT_IE_IRQ(port)) {
+				void __iomem *csi_rx_base =
+						base + CIO2_REG_PIPE_BASE(port);
+				u32 csi2_status;
+
+				csi2_status = readl(csi_rx_base +
+						CIO2_REG_IRQCTRL_STATUS);
+
+				cio2_irq_log_irq_errs(dev, port, csi2_status);
+
+				writel(csi2_status,
+				       csi_rx_base + CIO2_REG_IRQCTRL_CLEAR);
+			}
+		}
+
+		writel(ie_status, base + CIO2_REG_INT_STS_EXT_IE);
+
+		int_status &= ~(CIO2_INT_IOIE | CIO2_INT_IOIRQ);
+	}
+
+	if (int_status)
+		dev_warn(dev, "unknown interrupt 0x%x on INT\n", int_status);
+}
+
+static irqreturn_t cio2_irq(int irq, void *cio2_ptr)
+{
+	struct cio2_device *cio2 = cio2_ptr;
+	void __iomem *const base = cio2->base;
+	struct device *dev = &cio2->pci_dev->dev;
+	u32 int_status;
+
+	int_status = readl(base + CIO2_REG_INT_STS);
+	dev_dbg(dev, "isr enter - interrupt status 0x%x\n", int_status);
+	if (!int_status)
+		return IRQ_NONE;
+
+	do {
+		writel(int_status, base + CIO2_REG_INT_STS);
+		cio2_irq_handle_once(cio2, int_status);
+		int_status = readl(base + CIO2_REG_INT_STS);
+		if (int_status)
+			dev_dbg(dev, "pending status 0x%x\n", int_status);
+	} while (int_status);
+
+	return IRQ_HANDLED;
+}
+
+/**************** Videobuf2 interface ****************/
+
+static void cio2_vb2_return_all_buffers(struct cio2_queue *q,
+					enum vb2_buffer_state state)
+{
+	unsigned int i;
+
+	for (i = 0; i < CIO2_MAX_BUFFERS; i++) {
+		if (q->bufs[i]) {
+			atomic_dec(&q->bufs_queued);
+			vb2_buffer_done(&q->bufs[i]->vbb.vb2_buf,
+					state);
+			q->bufs[i] = NULL;
+		}
+	}
+}
+
+static int cio2_vb2_queue_setup(struct vb2_queue *vq,
+				unsigned int *num_buffers,
+				unsigned int *num_planes,
+				unsigned int sizes[],
+				struct device *alloc_devs[])
+{
+	struct cio2_device *cio2 = vb2_get_drv_priv(vq);
+	struct device *dev = &cio2->pci_dev->dev;
+	struct cio2_queue *q = vb2q_to_cio2_queue(vq);
+	unsigned int i;
+
+	if (*num_planes && *num_planes < q->format.num_planes)
+		return -EINVAL;
+
+	for (i = 0; i < q->format.num_planes; ++i) {
+		if (*num_planes && sizes[i] < q->format.plane_fmt[i].sizeimage)
+			return -EINVAL;
+		sizes[i] = q->format.plane_fmt[i].sizeimage;
+		alloc_devs[i] = dev;
+	}
+
+	*num_planes = q->format.num_planes;
+	*num_buffers = clamp_val(*num_buffers, 1, CIO2_MAX_BUFFERS);
+
+	/* Initialize buffer queue */
+	for (i = 0; i < CIO2_MAX_BUFFERS; i++) {
+		q->bufs[i] = NULL;
+		cio2_fbpt_entry_init_dummy(cio2, &q->fbpt[i * CIO2_MAX_LOPS]);
+	}
+	atomic_set(&q->bufs_queued, 0);
+	q->bufs_first = 0;
+	q->bufs_next = 0;
+
+	return 0;
+}
+
+/* Called after each buffer is allocated */
+static int cio2_vb2_buf_init(struct vb2_buffer *vb)
+{
+	struct cio2_device *cio2 = vb2_get_drv_priv(vb->vb2_queue);
+	struct device *dev = &cio2->pci_dev->dev;
+	struct cio2_buffer *b = to_cio2_buffer(vb);
+	unsigned int pages = PFN_UP(vb->planes[0].length);
+	unsigned int lops = DIV_ROUND_UP(pages + 1, CIO2_LOP_ENTRIES);
+	struct sg_table *sg;
+	struct sg_dma_page_iter sg_iter;
+	unsigned int i, j;
+
+	if (lops <= 0 || lops > CIO2_MAX_LOPS) {
+		dev_err(dev, "%s: bad buffer size (%i)\n", __func__,
+			vb->planes[0].length);
+		return -ENOSPC;		/* Should never happen */
+	}
+
+	memset(b->lop, 0, sizeof(b->lop));
+	/* Allocate LOP table */
+	for (i = 0; i < lops; i++) {
+		b->lop[i] = dma_alloc_coherent(dev, PAGE_SIZE,
+					       &b->lop_bus_addr[i], GFP_KERNEL);
+		if (!b->lop[i])
+			goto fail;
+	}
+
+	/* Fill LOP */
+	sg = vb2_dma_sg_plane_desc(vb, 0);
+	if (!sg)
+		return -ENOMEM;
+
+	if (sg->nents && sg->sgl)
+		b->offset = sg->sgl->offset;
+
+	i = j = 0;
+	for_each_sg_dma_page(sg->sgl, &sg_iter, sg->nents, 0) {
+		if (!pages--)
+			break;
+		b->lop[i][j] = PFN_DOWN(sg_page_iter_dma_address(&sg_iter));
+		j++;
+		if (j == CIO2_LOP_ENTRIES) {
+			i++;
+			j = 0;
+		}
+	}
+
+	b->lop[i][j] = PFN_DOWN(cio2->dummy_page_bus_addr);
+	return 0;
+fail:
+	while (i--)
+		dma_free_coherent(dev, PAGE_SIZE, b->lop[i], b->lop_bus_addr[i]);
+	return -ENOMEM;
+}
+
+/* Transfer buffer ownership to cio2 */
+static void cio2_vb2_buf_queue(struct vb2_buffer *vb)
+{
+	struct cio2_device *cio2 = vb2_get_drv_priv(vb->vb2_queue);
+	struct device *dev = &cio2->pci_dev->dev;
+	struct cio2_queue *q =
+		container_of(vb->vb2_queue, struct cio2_queue, vbq);
+	struct cio2_buffer *b = to_cio2_buffer(vb);
+	struct cio2_fbpt_entry *entry;
+	unsigned long flags;
+	unsigned int i, j, next = q->bufs_next;
+	int bufs_queued = atomic_inc_return(&q->bufs_queued);
+	u32 fbpt_rp;
+
+	dev_dbg(dev, "queue buffer %d\n", vb->index);
+
+	/*
+	 * This code queues the buffer to the CIO2 DMA engine, which starts
+	 * running once streaming has started. It is possible that this code
+	 * gets pre-empted due to increased CPU load. Upon this, the driver
+	 * does not get an opportunity to queue new buffers to the CIO2 DMA
+	 * engine. When the DMA engine encounters an FBPT entry without the
+	 * VALID bit set, the DMA engine halts, which requires a restart of
+	 * the DMA engine and sensor, to continue streaming.
+	 * This is not desired and is highly unlikely given that there are
+	 * 32 FBPT entries that the DMA engine needs to process, to run into
+	 * an FBPT entry, without the VALID bit set. We try to mitigate this
+	 * by disabling interrupts for the duration of this queueing.
+	 */
+	local_irq_save(flags);
+
+	fbpt_rp = (readl(cio2->base + CIO2_REG_CDMARI(CIO2_DMA_CHAN))
+		   >> CIO2_CDMARI_FBPT_RP_SHIFT)
+		   & CIO2_CDMARI_FBPT_RP_MASK;
+
+	/*
+	 * fbpt_rp is the fbpt entry that the dma is currently working
+	 * on, but since it could jump to next entry at any time,
+	 * assume that we might already be there.
+	 */
+	fbpt_rp = (fbpt_rp + 1) % CIO2_MAX_BUFFERS;
+
+	if (bufs_queued <= 1 || fbpt_rp == next)
+		/* Buffers were drained */
+		next = (fbpt_rp + 1) % CIO2_MAX_BUFFERS;
+
+	for (i = 0; i < CIO2_MAX_BUFFERS; i++) {
+		/*
+		 * We have allocated CIO2_MAX_BUFFERS circularly for the
+		 * hw, the user has requested N buffer queue. The driver
+		 * ensures N <= CIO2_MAX_BUFFERS and guarantees that whenever
+		 * user queues a buffer, there necessarily is a free buffer.
+		 */
+		if (!q->bufs[next]) {
+			q->bufs[next] = b;
+			entry = &q->fbpt[next * CIO2_MAX_LOPS];
+			cio2_fbpt_entry_init_buf(cio2, b, entry);
+			local_irq_restore(flags);
+			q->bufs_next = (next + 1) % CIO2_MAX_BUFFERS;
+			for (j = 0; j < vb->num_planes; j++)
+				vb2_set_plane_payload(vb, j,
+					q->format.plane_fmt[j].sizeimage);
+			return;
+		}
+
+		dev_dbg(dev, "entry %i was full!\n", next);
+		next = (next + 1) % CIO2_MAX_BUFFERS;
+	}
+
+	local_irq_restore(flags);
+	dev_err(dev, "error: all cio2 entries were full!\n");
+	atomic_dec(&q->bufs_queued);
+	vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
+}
+
+/* Called when each buffer is freed */
+static void cio2_vb2_buf_cleanup(struct vb2_buffer *vb)
+{
+	struct cio2_device *cio2 = vb2_get_drv_priv(vb->vb2_queue);
+	struct device *dev = &cio2->pci_dev->dev;
+	struct cio2_buffer *b = to_cio2_buffer(vb);
+	unsigned int i;
+
+	/* Free LOP table */
+	for (i = 0; i < CIO2_MAX_LOPS; i++) {
+		if (b->lop[i])
+			dma_free_coherent(dev, PAGE_SIZE,
+					  b->lop[i], b->lop_bus_addr[i]);
+	}
+}
+
+static int cio2_vb2_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+	struct cio2_queue *q = vb2q_to_cio2_queue(vq);
+	struct cio2_device *cio2 = vb2_get_drv_priv(vq);
+	struct device *dev = &cio2->pci_dev->dev;
+	int r;
+
+	cio2->cur_queue = q;
+	atomic_set(&q->frame_sequence, 0);
+
+	r = pm_runtime_resume_and_get(dev);
+	if (r < 0) {
+		dev_info(dev, "failed to set power %d\n", r);
+		return r;
+	}
+
+	r = video_device_pipeline_start(&q->vdev, &q->pipe);
+	if (r)
+		goto fail_pipeline;
+
+	r = cio2_hw_init(cio2, q);
+	if (r)
+		goto fail_hw;
+
+	/* Start streaming on sensor */
+	r = v4l2_subdev_call(q->sensor, video, s_stream, 1);
+	if (r)
+		goto fail_csi2_subdev;
+
+	cio2->streaming = true;
+
+	return 0;
+
+fail_csi2_subdev:
+	cio2_hw_exit(cio2, q);
+fail_hw:
+	video_device_pipeline_stop(&q->vdev);
+fail_pipeline:
+	dev_dbg(dev, "failed to start streaming (%d)\n", r);
+	cio2_vb2_return_all_buffers(q, VB2_BUF_STATE_QUEUED);
+	pm_runtime_put(dev);
+
+	return r;
+}
+
+static void cio2_vb2_stop_streaming(struct vb2_queue *vq)
+{
+	struct cio2_queue *q = vb2q_to_cio2_queue(vq);
+	struct cio2_device *cio2 = vb2_get_drv_priv(vq);
+	struct device *dev = &cio2->pci_dev->dev;
+
+	if (v4l2_subdev_call(q->sensor, video, s_stream, 0))
+		dev_err(dev, "failed to stop sensor streaming\n");
+
+	cio2_hw_exit(cio2, q);
+	synchronize_irq(cio2->pci_dev->irq);
+	cio2_vb2_return_all_buffers(q, VB2_BUF_STATE_ERROR);
+	video_device_pipeline_stop(&q->vdev);
+	pm_runtime_put(dev);
+	cio2->streaming = false;
+}
+
+static const struct vb2_ops cio2_vb2_ops = {
+	.buf_init = cio2_vb2_buf_init,
+	.buf_queue = cio2_vb2_buf_queue,
+	.buf_cleanup = cio2_vb2_buf_cleanup,
+	.queue_setup = cio2_vb2_queue_setup,
+	.start_streaming = cio2_vb2_start_streaming,
+	.stop_streaming = cio2_vb2_stop_streaming,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+};
+
+/**************** V4L2 interface ****************/
+
+static int cio2_v4l2_querycap(struct file *file, void *fh,
+			      struct v4l2_capability *cap)
+{
+	strscpy(cap->driver, CIO2_NAME, sizeof(cap->driver));
+	strscpy(cap->card, CIO2_DEVICE_NAME, sizeof(cap->card));
+
+	return 0;
+}
+
+static int cio2_v4l2_enum_fmt(struct file *file, void *fh,
+			      struct v4l2_fmtdesc *f)
+{
+	if (f->index >= ARRAY_SIZE(formats))
+		return -EINVAL;
+
+	f->pixelformat = formats[f->index].fourcc;
+
+	return 0;
+}
+
+/* The format is validated in cio2_video_link_validate() */
+static int cio2_v4l2_g_fmt(struct file *file, void *fh, struct v4l2_format *f)
+{
+	struct cio2_queue *q = file_to_cio2_queue(file);
+
+	f->fmt.pix_mp = q->format;
+
+	return 0;
+}
+
+static int cio2_v4l2_try_fmt(struct file *file, void *fh, struct v4l2_format *f)
+{
+	const struct ipu3_cio2_fmt *fmt;
+	struct v4l2_pix_format_mplane *mpix = &f->fmt.pix_mp;
+
+	fmt = cio2_find_format(&mpix->pixelformat, NULL);
+	if (!fmt)
+		fmt = &formats[0];
+
+	/* Only supports up to 4224x3136 */
+	if (mpix->width > CIO2_IMAGE_MAX_WIDTH)
+		mpix->width = CIO2_IMAGE_MAX_WIDTH;
+	if (mpix->height > CIO2_IMAGE_MAX_HEIGHT)
+		mpix->height = CIO2_IMAGE_MAX_HEIGHT;
+
+	mpix->num_planes = 1;
+	mpix->pixelformat = fmt->fourcc;
+	mpix->colorspace = V4L2_COLORSPACE_RAW;
+	mpix->field = V4L2_FIELD_NONE;
+	mpix->plane_fmt[0].bytesperline = cio2_bytesperline(mpix->width);
+	mpix->plane_fmt[0].sizeimage = mpix->plane_fmt[0].bytesperline *
+							mpix->height;
+
+	/* use default */
+	mpix->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
+	mpix->quantization = V4L2_QUANTIZATION_DEFAULT;
+	mpix->xfer_func = V4L2_XFER_FUNC_DEFAULT;
+
+	return 0;
+}
+
+static int cio2_v4l2_s_fmt(struct file *file, void *fh, struct v4l2_format *f)
+{
+	struct cio2_queue *q = file_to_cio2_queue(file);
+
+	cio2_v4l2_try_fmt(file, fh, f);
+	q->format = f->fmt.pix_mp;
+
+	return 0;
+}
+
+static int
+cio2_video_enum_input(struct file *file, void *fh, struct v4l2_input *input)
+{
+	if (input->index > 0)
+		return -EINVAL;
+
+	strscpy(input->name, "camera", sizeof(input->name));
+	input->type = V4L2_INPUT_TYPE_CAMERA;
+
+	return 0;
+}
+
+static int
+cio2_video_g_input(struct file *file, void *fh, unsigned int *input)
+{
+	*input = 0;
+
+	return 0;
+}
+
+static int
+cio2_video_s_input(struct file *file, void *fh, unsigned int input)
+{
+	return input == 0 ? 0 : -EINVAL;
+}
+
+static const struct v4l2_file_operations cio2_v4l2_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = video_ioctl2,
+	.open = v4l2_fh_open,
+	.release = vb2_fop_release,
+	.poll = vb2_fop_poll,
+	.mmap = vb2_fop_mmap,
+};
+
+static const struct v4l2_ioctl_ops cio2_v4l2_ioctl_ops = {
+	.vidioc_querycap = cio2_v4l2_querycap,
+	.vidioc_enum_fmt_vid_cap = cio2_v4l2_enum_fmt,
+	.vidioc_g_fmt_vid_cap_mplane = cio2_v4l2_g_fmt,
+	.vidioc_s_fmt_vid_cap_mplane = cio2_v4l2_s_fmt,
+	.vidioc_try_fmt_vid_cap_mplane = cio2_v4l2_try_fmt,
+	.vidioc_reqbufs = vb2_ioctl_reqbufs,
+	.vidioc_create_bufs = vb2_ioctl_create_bufs,
+	.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+	.vidioc_querybuf = vb2_ioctl_querybuf,
+	.vidioc_qbuf = vb2_ioctl_qbuf,
+	.vidioc_dqbuf = vb2_ioctl_dqbuf,
+	.vidioc_streamon = vb2_ioctl_streamon,
+	.vidioc_streamoff = vb2_ioctl_streamoff,
+	.vidioc_expbuf = vb2_ioctl_expbuf,
+	.vidioc_enum_input = cio2_video_enum_input,
+	.vidioc_g_input	= cio2_video_g_input,
+	.vidioc_s_input	= cio2_video_s_input,
+};
+
+static int cio2_subdev_subscribe_event(struct v4l2_subdev *sd,
+				       struct v4l2_fh *fh,
+				       struct v4l2_event_subscription *sub)
+{
+	if (sub->type != V4L2_EVENT_FRAME_SYNC)
+		return -EINVAL;
+
+	/* Line number. For now only zero accepted. */
+	if (sub->id != 0)
+		return -EINVAL;
+
+	return v4l2_event_subscribe(fh, sub, 0, NULL);
+}
+
+static int cio2_subdev_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+	struct v4l2_mbus_framefmt *format;
+	const struct v4l2_mbus_framefmt fmt_default = {
+		.width = 1936,
+		.height = 1096,
+		.code = formats[0].mbus_code,
+		.field = V4L2_FIELD_NONE,
+		.colorspace = V4L2_COLORSPACE_RAW,
+		.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
+		.quantization = V4L2_QUANTIZATION_DEFAULT,
+		.xfer_func = V4L2_XFER_FUNC_DEFAULT,
+	};
+
+	/* Initialize try_fmt */
+	format = v4l2_subdev_get_try_format(sd, fh->state, CIO2_PAD_SINK);
+	*format = fmt_default;
+
+	/* same as sink */
+	format = v4l2_subdev_get_try_format(sd, fh->state, CIO2_PAD_SOURCE);
+	*format = fmt_default;
+
+	return 0;
+}
+
+/*
+ * cio2_subdev_get_fmt - Handle get format by pads subdev method
+ * @sd : pointer to v4l2 subdev structure
+ * @cfg: V4L2 subdev pad config
+ * @fmt: pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on success
+ */
+static int cio2_subdev_get_fmt(struct v4l2_subdev *sd,
+			       struct v4l2_subdev_state *sd_state,
+			       struct v4l2_subdev_format *fmt)
+{
+	struct cio2_queue *q = container_of(sd, struct cio2_queue, subdev);
+
+	mutex_lock(&q->subdev_lock);
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
+		fmt->format = *v4l2_subdev_get_try_format(sd, sd_state,
+							  fmt->pad);
+	else
+		fmt->format = q->subdev_fmt;
+
+	mutex_unlock(&q->subdev_lock);
+
+	return 0;
+}
+
+/*
+ * cio2_subdev_set_fmt - Handle set format by pads subdev method
+ * @sd : pointer to v4l2 subdev structure
+ * @cfg: V4L2 subdev pad config
+ * @fmt: pointer to v4l2 subdev format structure
+ * return -EINVAL or zero on success
+ */
+static int cio2_subdev_set_fmt(struct v4l2_subdev *sd,
+			       struct v4l2_subdev_state *sd_state,
+			       struct v4l2_subdev_format *fmt)
+{
+	struct cio2_queue *q = container_of(sd, struct cio2_queue, subdev);
+	struct v4l2_mbus_framefmt *mbus;
+	u32 mbus_code = fmt->format.code;
+	unsigned int i;
+
+	/*
+	 * Only allow setting sink pad format;
+	 * source always propagates from sink
+	 */
+	if (fmt->pad == CIO2_PAD_SOURCE)
+		return cio2_subdev_get_fmt(sd, sd_state, fmt);
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
+		mbus = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
+	else
+		mbus = &q->subdev_fmt;
+
+	fmt->format.code = formats[0].mbus_code;
+
+	for (i = 0; i < ARRAY_SIZE(formats); i++) {
+		if (formats[i].mbus_code == mbus_code) {
+			fmt->format.code = mbus_code;
+			break;
+		}
+	}
+
+	fmt->format.width = min(fmt->format.width, CIO2_IMAGE_MAX_WIDTH);
+	fmt->format.height = min(fmt->format.height, CIO2_IMAGE_MAX_HEIGHT);
+	fmt->format.field = V4L2_FIELD_NONE;
+
+	mutex_lock(&q->subdev_lock);
+	*mbus = fmt->format;
+	mutex_unlock(&q->subdev_lock);
+
+	return 0;
+}
+
+static int cio2_subdev_enum_mbus_code(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_state *sd_state,
+				      struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->index >= ARRAY_SIZE(formats))
+		return -EINVAL;
+
+	code->code = formats[code->index].mbus_code;
+	return 0;
+}
+
+static int cio2_subdev_link_validate_get_format(struct media_pad *pad,
+						struct v4l2_subdev_format *fmt)
+{
+	if (is_media_entity_v4l2_subdev(pad->entity)) {
+		struct v4l2_subdev *sd =
+			media_entity_to_v4l2_subdev(pad->entity);
+
+		fmt->which = V4L2_SUBDEV_FORMAT_ACTIVE;
+		fmt->pad = pad->index;
+		return v4l2_subdev_call(sd, pad, get_fmt, NULL, fmt);
+	}
+
+	return -EINVAL;
+}
+
+static int cio2_video_link_validate(struct media_link *link)
+{
+	struct media_entity *entity = link->sink->entity;
+	struct video_device *vd = media_entity_to_video_device(entity);
+	struct cio2_queue *q = container_of(vd, struct cio2_queue, vdev);
+	struct cio2_device *cio2 = video_get_drvdata(vd);
+	struct device *dev = &cio2->pci_dev->dev;
+	struct v4l2_subdev_format source_fmt;
+	int ret;
+
+	if (!media_pad_remote_pad_first(entity->pads)) {
+		dev_info(dev, "video node %s pad not connected\n", vd->name);
+		return -ENOTCONN;
+	}
+
+	ret = cio2_subdev_link_validate_get_format(link->source, &source_fmt);
+	if (ret < 0)
+		return 0;
+
+	if (source_fmt.format.width != q->format.width ||
+	    source_fmt.format.height != q->format.height) {
+		dev_err(dev, "Wrong width or height %ux%u (%ux%u expected)\n",
+			q->format.width, q->format.height,
+			source_fmt.format.width, source_fmt.format.height);
+		return -EINVAL;
+	}
+
+	if (!cio2_find_format(&q->format.pixelformat, &source_fmt.format.code))
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops cio2_subdev_core_ops = {
+	.subscribe_event = cio2_subdev_subscribe_event,
+	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static const struct v4l2_subdev_internal_ops cio2_subdev_internal_ops = {
+	.open = cio2_subdev_open,
+};
+
+static const struct v4l2_subdev_pad_ops cio2_subdev_pad_ops = {
+	.link_validate = v4l2_subdev_link_validate_default,
+	.get_fmt = cio2_subdev_get_fmt,
+	.set_fmt = cio2_subdev_set_fmt,
+	.enum_mbus_code = cio2_subdev_enum_mbus_code,
+};
+
+static const struct v4l2_subdev_ops cio2_subdev_ops = {
+	.core = &cio2_subdev_core_ops,
+	.pad = &cio2_subdev_pad_ops,
+};
+
+/******* V4L2 sub-device asynchronous registration callbacks***********/
+
+struct sensor_async_subdev {
+	struct v4l2_async_subdev asd;
+	struct csi2_bus_info csi2;
+};
+
+#define to_sensor_asd(asd)	container_of(asd, struct sensor_async_subdev, asd)
+
+/* The .bound() notifier callback when a match is found */
+static int cio2_notifier_bound(struct v4l2_async_notifier *notifier,
+			       struct v4l2_subdev *sd,
+			       struct v4l2_async_subdev *asd)
+{
+	struct cio2_device *cio2 = to_cio2_device(notifier);
+	struct sensor_async_subdev *s_asd = to_sensor_asd(asd);
+	struct cio2_queue *q;
+
+	if (cio2->queue[s_asd->csi2.port].sensor)
+		return -EBUSY;
+
+	q = &cio2->queue[s_asd->csi2.port];
+
+	q->csi2 = s_asd->csi2;
+	q->sensor = sd;
+	q->csi_rx_base = cio2->base + CIO2_REG_PIPE_BASE(q->csi2.port);
+
+	return 0;
+}
+
+/* The .unbind callback */
+static void cio2_notifier_unbind(struct v4l2_async_notifier *notifier,
+				 struct v4l2_subdev *sd,
+				 struct v4l2_async_subdev *asd)
+{
+	struct cio2_device *cio2 = to_cio2_device(notifier);
+	struct sensor_async_subdev *s_asd = to_sensor_asd(asd);
+
+	cio2->queue[s_asd->csi2.port].sensor = NULL;
+}
+
+/* .complete() is called after all subdevices have been located */
+static int cio2_notifier_complete(struct v4l2_async_notifier *notifier)
+{
+	struct cio2_device *cio2 = to_cio2_device(notifier);
+	struct device *dev = &cio2->pci_dev->dev;
+	struct sensor_async_subdev *s_asd;
+	struct v4l2_async_subdev *asd;
+	struct cio2_queue *q;
+	unsigned int pad;
+	int ret;
+
+	list_for_each_entry(asd, &cio2->notifier.asd_list, asd_list) {
+		s_asd = to_sensor_asd(asd);
+		q = &cio2->queue[s_asd->csi2.port];
+
+		for (pad = 0; pad < q->sensor->entity.num_pads; pad++)
+			if (q->sensor->entity.pads[pad].flags &
+						MEDIA_PAD_FL_SOURCE)
+				break;
+
+		if (pad == q->sensor->entity.num_pads) {
+			dev_err(dev, "failed to find src pad for %s\n",
+				q->sensor->name);
+			return -ENXIO;
+		}
+
+		ret = media_create_pad_link(
+				&q->sensor->entity, pad,
+				&q->subdev.entity, CIO2_PAD_SINK,
+				0);
+		if (ret) {
+			dev_err(dev, "failed to create link for %s\n",
+				q->sensor->name);
+			return ret;
+		}
+	}
+
+	return v4l2_device_register_subdev_nodes(&cio2->v4l2_dev);
+}
+
+static const struct v4l2_async_notifier_operations cio2_async_ops = {
+	.bound = cio2_notifier_bound,
+	.unbind = cio2_notifier_unbind,
+	.complete = cio2_notifier_complete,
+};
+
+static int cio2_parse_firmware(struct cio2_device *cio2)
+{
+	struct device *dev = &cio2->pci_dev->dev;
+	unsigned int i;
+	int ret;
+
+	for (i = 0; i < CIO2_NUM_PORTS; i++) {
+		struct v4l2_fwnode_endpoint vep = {
+			.bus_type = V4L2_MBUS_CSI2_DPHY
+		};
+		struct sensor_async_subdev *s_asd;
+		struct fwnode_handle *ep;
+
+		ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), i, 0,
+						FWNODE_GRAPH_ENDPOINT_NEXT);
+		if (!ep)
+			continue;
+
+		ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+		if (ret)
+			goto err_parse;
+
+		s_asd = v4l2_async_nf_add_fwnode_remote(&cio2->notifier, ep,
+							struct
+							sensor_async_subdev);
+		if (IS_ERR(s_asd)) {
+			ret = PTR_ERR(s_asd);
+			goto err_parse;
+		}
+
+		s_asd->csi2.port = vep.base.port;
+		s_asd->csi2.lanes = vep.bus.mipi_csi2.num_data_lanes;
+
+		fwnode_handle_put(ep);
+
+		continue;
+
+err_parse:
+		fwnode_handle_put(ep);
+		return ret;
+	}
+
+	/*
+	 * Proceed even without sensors connected to allow the device to
+	 * suspend.
+	 */
+	cio2->notifier.ops = &cio2_async_ops;
+	ret = v4l2_async_nf_register(&cio2->v4l2_dev, &cio2->notifier);
+	if (ret)
+		dev_err(dev, "failed to register async notifier : %d\n", ret);
+
+	return ret;
+}
+
+/**************** Queue initialization ****************/
+static const struct media_entity_operations cio2_media_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+static const struct media_entity_operations cio2_video_entity_ops = {
+	.link_validate = cio2_video_link_validate,
+};
+
+static int cio2_queue_init(struct cio2_device *cio2, struct cio2_queue *q)
+{
+	static const u32 default_width = 1936;
+	static const u32 default_height = 1096;
+	const struct ipu3_cio2_fmt dflt_fmt = formats[0];
+	struct device *dev = &cio2->pci_dev->dev;
+	struct video_device *vdev = &q->vdev;
+	struct vb2_queue *vbq = &q->vbq;
+	struct v4l2_subdev *subdev = &q->subdev;
+	struct v4l2_mbus_framefmt *fmt;
+	int r;
+
+	/* Initialize miscellaneous variables */
+	mutex_init(&q->lock);
+	mutex_init(&q->subdev_lock);
+
+	/* Initialize formats to default values */
+	fmt = &q->subdev_fmt;
+	fmt->width = default_width;
+	fmt->height = default_height;
+	fmt->code = dflt_fmt.mbus_code;
+	fmt->field = V4L2_FIELD_NONE;
+
+	q->format.width = default_width;
+	q->format.height = default_height;
+	q->format.pixelformat = dflt_fmt.fourcc;
+	q->format.colorspace = V4L2_COLORSPACE_RAW;
+	q->format.field = V4L2_FIELD_NONE;
+	q->format.num_planes = 1;
+	q->format.plane_fmt[0].bytesperline =
+				cio2_bytesperline(q->format.width);
+	q->format.plane_fmt[0].sizeimage = q->format.plane_fmt[0].bytesperline *
+						q->format.height;
+
+	/* Initialize fbpt */
+	r = cio2_fbpt_init(cio2, q);
+	if (r)
+		goto fail_fbpt;
+
+	/* Initialize media entities */
+	q->subdev_pads[CIO2_PAD_SINK].flags = MEDIA_PAD_FL_SINK |
+		MEDIA_PAD_FL_MUST_CONNECT;
+	q->subdev_pads[CIO2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+	subdev->entity.ops = &cio2_media_ops;
+	subdev->internal_ops = &cio2_subdev_internal_ops;
+	r = media_entity_pads_init(&subdev->entity, CIO2_PADS, q->subdev_pads);
+	if (r) {
+		dev_err(dev, "failed initialize subdev media entity (%d)\n", r);
+		goto fail_subdev_media_entity;
+	}
+
+	q->vdev_pad.flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_MUST_CONNECT;
+	vdev->entity.ops = &cio2_video_entity_ops;
+	r = media_entity_pads_init(&vdev->entity, 1, &q->vdev_pad);
+	if (r) {
+		dev_err(dev, "failed initialize videodev media entity (%d)\n",
+			r);
+		goto fail_vdev_media_entity;
+	}
+
+	/* Initialize subdev */
+	v4l2_subdev_init(subdev, &cio2_subdev_ops);
+	subdev->flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
+	subdev->owner = THIS_MODULE;
+	snprintf(subdev->name, sizeof(subdev->name),
+		 CIO2_ENTITY_NAME " %td", q - cio2->queue);
+	subdev->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+	v4l2_set_subdevdata(subdev, cio2);
+	r = v4l2_device_register_subdev(&cio2->v4l2_dev, subdev);
+	if (r) {
+		dev_err(dev, "failed initialize subdev (%d)\n", r);
+		goto fail_subdev;
+	}
+
+	/* Initialize vbq */
+	vbq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
+	vbq->io_modes = VB2_USERPTR | VB2_MMAP | VB2_DMABUF;
+	vbq->ops = &cio2_vb2_ops;
+	vbq->mem_ops = &vb2_dma_sg_memops;
+	vbq->buf_struct_size = sizeof(struct cio2_buffer);
+	vbq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	vbq->min_buffers_needed = 1;
+	vbq->drv_priv = cio2;
+	vbq->lock = &q->lock;
+	r = vb2_queue_init(vbq);
+	if (r) {
+		dev_err(dev, "failed to initialize videobuf2 queue (%d)\n", r);
+		goto fail_subdev;
+	}
+
+	/* Initialize vdev */
+	snprintf(vdev->name, sizeof(vdev->name),
+		 "%s %td", CIO2_NAME, q - cio2->queue);
+	vdev->release = video_device_release_empty;
+	vdev->fops = &cio2_v4l2_fops;
+	vdev->ioctl_ops = &cio2_v4l2_ioctl_ops;
+	vdev->lock = &cio2->lock;
+	vdev->v4l2_dev = &cio2->v4l2_dev;
+	vdev->queue = &q->vbq;
+	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_STREAMING;
+	video_set_drvdata(vdev, cio2);
+	r = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
+	if (r) {
+		dev_err(dev, "failed to register video device (%d)\n", r);
+		goto fail_vdev;
+	}
+
+	/* Create link from CIO2 subdev to output node */
+	r = media_create_pad_link(
+		&subdev->entity, CIO2_PAD_SOURCE, &vdev->entity, 0,
+		MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE);
+	if (r)
+		goto fail_link;
+
+	return 0;
+
+fail_link:
+	vb2_video_unregister_device(&q->vdev);
+fail_vdev:
+	v4l2_device_unregister_subdev(subdev);
+fail_subdev:
+	media_entity_cleanup(&vdev->entity);
+fail_vdev_media_entity:
+	media_entity_cleanup(&subdev->entity);
+fail_subdev_media_entity:
+	cio2_fbpt_exit(q, dev);
+fail_fbpt:
+	mutex_destroy(&q->subdev_lock);
+	mutex_destroy(&q->lock);
+
+	return r;
+}
+
+static void cio2_queue_exit(struct cio2_device *cio2, struct cio2_queue *q)
+{
+	vb2_video_unregister_device(&q->vdev);
+	media_entity_cleanup(&q->vdev.entity);
+	v4l2_device_unregister_subdev(&q->subdev);
+	media_entity_cleanup(&q->subdev.entity);
+	cio2_fbpt_exit(q, &cio2->pci_dev->dev);
+	mutex_destroy(&q->subdev_lock);
+	mutex_destroy(&q->lock);
+}
+
+static int cio2_queues_init(struct cio2_device *cio2)
+{
+	int i, r;
+
+	for (i = 0; i < CIO2_QUEUES; i++) {
+		r = cio2_queue_init(cio2, &cio2->queue[i]);
+		if (r)
+			break;
+	}
+
+	if (i == CIO2_QUEUES)
+		return 0;
+
+	for (i--; i >= 0; i--)
+		cio2_queue_exit(cio2, &cio2->queue[i]);
+
+	return r;
+}
+
+static void cio2_queues_exit(struct cio2_device *cio2)
+{
+	unsigned int i;
+
+	for (i = 0; i < CIO2_QUEUES; i++)
+		cio2_queue_exit(cio2, &cio2->queue[i]);
+}
+
+static int cio2_check_fwnode_graph(struct fwnode_handle *fwnode)
+{
+	struct fwnode_handle *endpoint;
+
+	if (IS_ERR_OR_NULL(fwnode))
+		return -EINVAL;
+
+	endpoint = fwnode_graph_get_next_endpoint(fwnode, NULL);
+	if (endpoint) {
+		fwnode_handle_put(endpoint);
+		return 0;
+	}
+
+	return cio2_check_fwnode_graph(fwnode->secondary);
+}
+
+/**************** PCI interface ****************/
+
+static int cio2_pci_probe(struct pci_dev *pci_dev,
+			  const struct pci_device_id *id)
+{
+	struct device *dev = &pci_dev->dev;
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+	struct cio2_device *cio2;
+	int r;
+
+	/*
+	 * On some platforms no connections to sensors are defined in firmware,
+	 * if the device has no endpoints then we can try to build those as
+	 * software_nodes parsed from SSDB.
+	 */
+	r = cio2_check_fwnode_graph(fwnode);
+	if (r) {
+		if (fwnode && !IS_ERR_OR_NULL(fwnode->secondary)) {
+			dev_err(dev, "fwnode graph has no endpoints connected\n");
+			return -EINVAL;
+		}
+
+		r = cio2_bridge_init(pci_dev);
+		if (r)
+			return r;
+	}
+
+	cio2 = devm_kzalloc(dev, sizeof(*cio2), GFP_KERNEL);
+	if (!cio2)
+		return -ENOMEM;
+	cio2->pci_dev = pci_dev;
+
+	r = pcim_enable_device(pci_dev);
+	if (r) {
+		dev_err(dev, "failed to enable device (%d)\n", r);
+		return r;
+	}
+
+	dev_info(dev, "device 0x%x (rev: 0x%x)\n",
+		 pci_dev->device, pci_dev->revision);
+
+	r = pcim_iomap_regions(pci_dev, 1 << CIO2_PCI_BAR, pci_name(pci_dev));
+	if (r) {
+		dev_err(dev, "failed to remap I/O memory (%d)\n", r);
+		return -ENODEV;
+	}
+
+	cio2->base = pcim_iomap_table(pci_dev)[CIO2_PCI_BAR];
+
+	pci_set_drvdata(pci_dev, cio2);
+
+	pci_set_master(pci_dev);
+
+	r = dma_set_mask(&pci_dev->dev, CIO2_DMA_MASK);
+	if (r) {
+		dev_err(dev, "failed to set DMA mask (%d)\n", r);
+		return -ENODEV;
+	}
+
+	r = pci_enable_msi(pci_dev);
+	if (r) {
+		dev_err(dev, "failed to enable MSI (%d)\n", r);
+		return r;
+	}
+
+	r = cio2_fbpt_init_dummy(cio2);
+	if (r)
+		return r;
+
+	mutex_init(&cio2->lock);
+
+	cio2->media_dev.dev = dev;
+	strscpy(cio2->media_dev.model, CIO2_DEVICE_NAME,
+		sizeof(cio2->media_dev.model));
+	cio2->media_dev.hw_revision = 0;
+
+	media_device_init(&cio2->media_dev);
+	r = media_device_register(&cio2->media_dev);
+	if (r < 0)
+		goto fail_mutex_destroy;
+
+	cio2->v4l2_dev.mdev = &cio2->media_dev;
+	r = v4l2_device_register(dev, &cio2->v4l2_dev);
+	if (r) {
+		dev_err(dev, "failed to register V4L2 device (%d)\n", r);
+		goto fail_media_device_unregister;
+	}
+
+	r = cio2_queues_init(cio2);
+	if (r)
+		goto fail_v4l2_device_unregister;
+
+	v4l2_async_nf_init(&cio2->notifier);
+
+	/* Register notifier for subdevices we care */
+	r = cio2_parse_firmware(cio2);
+	if (r)
+		goto fail_clean_notifier;
+
+	r = devm_request_irq(dev, pci_dev->irq, cio2_irq, IRQF_SHARED,
+			     CIO2_NAME, cio2);
+	if (r) {
+		dev_err(dev, "failed to request IRQ (%d)\n", r);
+		goto fail_clean_notifier;
+	}
+
+	pm_runtime_put_noidle(dev);
+	pm_runtime_allow(dev);
+
+	return 0;
+
+fail_clean_notifier:
+	v4l2_async_nf_unregister(&cio2->notifier);
+	v4l2_async_nf_cleanup(&cio2->notifier);
+	cio2_queues_exit(cio2);
+fail_v4l2_device_unregister:
+	v4l2_device_unregister(&cio2->v4l2_dev);
+fail_media_device_unregister:
+	media_device_unregister(&cio2->media_dev);
+	media_device_cleanup(&cio2->media_dev);
+fail_mutex_destroy:
+	mutex_destroy(&cio2->lock);
+	cio2_fbpt_exit_dummy(cio2);
+
+	return r;
+}
+
+static void cio2_pci_remove(struct pci_dev *pci_dev)
+{
+	struct cio2_device *cio2 = pci_get_drvdata(pci_dev);
+
+	media_device_unregister(&cio2->media_dev);
+	v4l2_async_nf_unregister(&cio2->notifier);
+	v4l2_async_nf_cleanup(&cio2->notifier);
+	cio2_queues_exit(cio2);
+	cio2_fbpt_exit_dummy(cio2);
+	v4l2_device_unregister(&cio2->v4l2_dev);
+	media_device_cleanup(&cio2->media_dev);
+	mutex_destroy(&cio2->lock);
+
+	pm_runtime_forbid(&pci_dev->dev);
+	pm_runtime_get_noresume(&pci_dev->dev);
+}
+
+static int __maybe_unused cio2_runtime_suspend(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct cio2_device *cio2 = pci_get_drvdata(pci_dev);
+	void __iomem *const base = cio2->base;
+	u16 pm;
+
+	writel(CIO2_D0I3C_I3, base + CIO2_REG_D0I3C);
+	dev_dbg(dev, "cio2 runtime suspend.\n");
+
+	pci_read_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, &pm);
+	pm = (pm >> CIO2_PMCSR_D0D3_SHIFT) << CIO2_PMCSR_D0D3_SHIFT;
+	pm |= CIO2_PMCSR_D3;
+	pci_write_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, pm);
+
+	return 0;
+}
+
+static int __maybe_unused cio2_runtime_resume(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct cio2_device *cio2 = pci_get_drvdata(pci_dev);
+	void __iomem *const base = cio2->base;
+	u16 pm;
+
+	writel(CIO2_D0I3C_RR, base + CIO2_REG_D0I3C);
+	dev_dbg(dev, "cio2 runtime resume.\n");
+
+	pci_read_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, &pm);
+	pm = (pm >> CIO2_PMCSR_D0D3_SHIFT) << CIO2_PMCSR_D0D3_SHIFT;
+	pci_write_config_word(pci_dev, pci_dev->pm_cap + CIO2_PMCSR_OFFSET, pm);
+
+	return 0;
+}
+
+/*
+ * Helper function to advance all the elements of a circular buffer by "start"
+ * positions
+ */
+static void arrange(void *ptr, size_t elem_size, size_t elems, size_t start)
+{
+	struct {
+		size_t begin, end;
+	} arr[2] = {
+		{ 0, start - 1 },
+		{ start, elems - 1 },
+	};
+
+#define CHUNK_SIZE(a) ((a)->end - (a)->begin + 1)
+
+	/* Loop as long as we have out-of-place entries */
+	while (CHUNK_SIZE(&arr[0]) && CHUNK_SIZE(&arr[1])) {
+		size_t size0, i;
+
+		/*
+		 * Find the number of entries that can be arranged on this
+		 * iteration.
+		 */
+		size0 = min(CHUNK_SIZE(&arr[0]), CHUNK_SIZE(&arr[1]));
+
+		/* Swap the entries in two parts of the array. */
+		for (i = 0; i < size0; i++) {
+			u8 *d = ptr + elem_size * (arr[1].begin + i);
+			u8 *s = ptr + elem_size * (arr[0].begin + i);
+			size_t j;
+
+			for (j = 0; j < elem_size; j++)
+				swap(d[j], s[j]);
+		}
+
+		if (CHUNK_SIZE(&arr[0]) > CHUNK_SIZE(&arr[1])) {
+			/* The end of the first array remains unarranged. */
+			arr[0].begin += size0;
+		} else {
+			/*
+			 * The first array is fully arranged so we proceed
+			 * handling the next one.
+			 */
+			arr[0].begin = arr[1].begin;
+			arr[0].end = arr[1].begin + size0 - 1;
+			arr[1].begin += size0;
+		}
+	}
+}
+
+static void cio2_fbpt_rearrange(struct cio2_device *cio2, struct cio2_queue *q)
+{
+	unsigned int i, j;
+
+	for (i = 0, j = q->bufs_first; i < CIO2_MAX_BUFFERS;
+		i++, j = (j + 1) % CIO2_MAX_BUFFERS)
+		if (q->bufs[j])
+			break;
+
+	if (i == CIO2_MAX_BUFFERS)
+		return;
+
+	if (j) {
+		arrange(q->fbpt, sizeof(struct cio2_fbpt_entry) * CIO2_MAX_LOPS,
+			CIO2_MAX_BUFFERS, j);
+		arrange(q->bufs, sizeof(struct cio2_buffer *),
+			CIO2_MAX_BUFFERS, j);
+	}
+
+	/*
+	 * DMA clears the valid bit when accessing the buffer.
+	 * When stopping stream in suspend callback, some of the buffers
+	 * may be in invalid state. After resume, when DMA meets the invalid
+	 * buffer, it will halt and stop receiving new data.
+	 * To avoid DMA halting, set the valid bit for all buffers in FBPT.
+	 */
+	for (i = 0; i < CIO2_MAX_BUFFERS; i++)
+		cio2_fbpt_entry_enable(cio2, q->fbpt + i * CIO2_MAX_LOPS);
+}
+
+static int __maybe_unused cio2_suspend(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct cio2_device *cio2 = pci_get_drvdata(pci_dev);
+	struct cio2_queue *q = cio2->cur_queue;
+	int r;
+
+	dev_dbg(dev, "cio2 suspend\n");
+	if (!cio2->streaming)
+		return 0;
+
+	/* Stop stream */
+	r = v4l2_subdev_call(q->sensor, video, s_stream, 0);
+	if (r) {
+		dev_err(dev, "failed to stop sensor streaming\n");
+		return r;
+	}
+
+	cio2_hw_exit(cio2, q);
+	synchronize_irq(pci_dev->irq);
+
+	pm_runtime_force_suspend(dev);
+
+	/*
+	 * Upon resume, hw starts to process the fbpt entries from beginning,
+	 * so relocate the queued buffs to the fbpt head before suspend.
+	 */
+	cio2_fbpt_rearrange(cio2, q);
+	q->bufs_first = 0;
+	q->bufs_next = 0;
+
+	return 0;
+}
+
+static int __maybe_unused cio2_resume(struct device *dev)
+{
+	struct cio2_device *cio2 = dev_get_drvdata(dev);
+	struct cio2_queue *q = cio2->cur_queue;
+	int r;
+
+	dev_dbg(dev, "cio2 resume\n");
+	if (!cio2->streaming)
+		return 0;
+	/* Start stream */
+	r = pm_runtime_force_resume(dev);
+	if (r < 0) {
+		dev_err(dev, "failed to set power %d\n", r);
+		return r;
+	}
+
+	r = cio2_hw_init(cio2, q);
+	if (r) {
+		dev_err(dev, "fail to init cio2 hw\n");
+		return r;
+	}
+
+	r = v4l2_subdev_call(q->sensor, video, s_stream, 1);
+	if (r) {
+		dev_err(dev, "fail to start sensor streaming\n");
+		cio2_hw_exit(cio2, q);
+	}
+
+	return r;
+}
+
+static const struct dev_pm_ops cio2_pm_ops = {
+	SET_RUNTIME_PM_OPS(&cio2_runtime_suspend, &cio2_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(&cio2_suspend, &cio2_resume)
+};
+
+static const struct pci_device_id cio2_pci_id_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, CIO2_PCI_ID) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pci, cio2_pci_id_table);
+
+static struct pci_driver cio2_pci_driver = {
+	.name = CIO2_NAME,
+	.id_table = cio2_pci_id_table,
+	.probe = cio2_pci_probe,
+	.remove = cio2_pci_remove,
+	.driver = {
+		.pm = &cio2_pm_ops,
+	},
+};
+
+module_pci_driver(cio2_pci_driver);
+
+MODULE_AUTHOR("Tuukka Toivonen <tuukka.toivonen@intel.com>");
+MODULE_AUTHOR("Tianshu Qiu <tian.shu.qiu@intel.com>");
+MODULE_AUTHOR("Jian Xu Zheng");
+MODULE_AUTHOR("Yuning Pu <yuning.pu@intel.com>");
+MODULE_AUTHOR("Yong Zhi <yong.zhi@intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("IPU3 CIO2 driver");
diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.h b/drivers/media/pci/intel/ipu3/ipu3-cio2.h
new file mode 100644
index 000000000..3a1f394e0
--- /dev/null
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.h
@@ -0,0 +1,468 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2017 Intel Corporation */
+
+#ifndef __IPU3_CIO2_H
+#define __IPU3_CIO2_H
+
+#include <linux/bits.h>
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+#include <asm/page.h>
+
+#include <media/media-device.h>
+#include <media/media-entity.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+#include <media/videobuf2-core.h>
+#include <media/videobuf2-v4l2.h>
+
+struct cio2_fbpt_entry;		/* defined here, after the first usage */
+struct pci_dev;
+
+#define CIO2_NAME					"ipu3-cio2"
+#define CIO2_DEVICE_NAME				"Intel IPU3 CIO2"
+#define CIO2_ENTITY_NAME				"ipu3-csi2"
+#define CIO2_PCI_ID					0x9d32
+#define CIO2_PCI_BAR					0
+#define CIO2_DMA_MASK					DMA_BIT_MASK(39)
+
+#define CIO2_IMAGE_MAX_WIDTH				4224U
+#define CIO2_IMAGE_MAX_HEIGHT				3136U
+
+/* 32MB = 8xFBPT_entry */
+#define CIO2_MAX_LOPS					8
+#define CIO2_MAX_BUFFERS			(PAGE_SIZE / 16 / CIO2_MAX_LOPS)
+#define CIO2_LOP_ENTRIES			(PAGE_SIZE / sizeof(u32))
+
+#define CIO2_PAD_SINK					0U
+#define CIO2_PAD_SOURCE					1U
+#define CIO2_PADS					2U
+
+#define CIO2_NUM_DMA_CHAN				20U
+#define CIO2_NUM_PORTS					4U /* DPHYs */
+
+/* 1 for each sensor */
+#define CIO2_QUEUES					CIO2_NUM_PORTS
+
+/* Register and bit field definitions */
+#define CIO2_REG_PIPE_BASE(n)			((n) * 0x0400)	/* n = 0..3 */
+#define CIO2_REG_CSIRX_BASE				0x000
+#define CIO2_REG_MIPIBE_BASE				0x100
+#define CIO2_REG_PIXELGEN_BAS				0x200
+#define CIO2_REG_IRQCTRL_BASE				0x300
+#define CIO2_REG_GPREG_BASE				0x1000
+
+/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_CSIRX_BASE */
+#define CIO2_REG_CSIRX_ENABLE			(CIO2_REG_CSIRX_BASE + 0x0)
+#define CIO2_REG_CSIRX_NOF_ENABLED_LANES	(CIO2_REG_CSIRX_BASE + 0x4)
+#define CIO2_REG_CSIRX_SP_IF_CONFIG		(CIO2_REG_CSIRX_BASE + 0x10)
+#define CIO2_REG_CSIRX_LP_IF_CONFIG		(CIO2_REG_CSIRX_BASE + 0x14)
+#define CIO2_CSIRX_IF_CONFIG_FILTEROUT			0x00
+#define CIO2_CSIRX_IF_CONFIG_FILTEROUT_VC_INACTIVE	0x01
+#define CIO2_CSIRX_IF_CONFIG_PASS			0x02
+#define CIO2_CSIRX_IF_CONFIG_FLAG_ERROR			BIT(2)
+#define CIO2_REG_CSIRX_STATUS			(CIO2_REG_CSIRX_BASE + 0x18)
+#define CIO2_REG_CSIRX_STATUS_DLANE_HS		(CIO2_REG_CSIRX_BASE + 0x1c)
+#define CIO2_CSIRX_STATUS_DLANE_HS_MASK			0xff
+#define CIO2_REG_CSIRX_STATUS_DLANE_LP		(CIO2_REG_CSIRX_BASE + 0x20)
+#define CIO2_CSIRX_STATUS_DLANE_LP_MASK			0xffffff
+/* Termination enable and settle in 0.0625ns units, lane=0..3 or -1 for clock */
+#define CIO2_REG_CSIRX_DLY_CNT_TERMEN(lane) \
+				(CIO2_REG_CSIRX_BASE + 0x2c + 8 * (lane))
+#define CIO2_REG_CSIRX_DLY_CNT_SETTLE(lane) \
+				(CIO2_REG_CSIRX_BASE + 0x30 + 8 * (lane))
+/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_MIPIBE_BASE */
+#define CIO2_REG_MIPIBE_ENABLE		(CIO2_REG_MIPIBE_BASE + 0x0)
+#define CIO2_REG_MIPIBE_STATUS		(CIO2_REG_MIPIBE_BASE + 0x4)
+#define CIO2_REG_MIPIBE_COMP_FORMAT(vc) \
+				(CIO2_REG_MIPIBE_BASE + 0x8 + 0x4 * (vc))
+#define CIO2_REG_MIPIBE_FORCE_RAW8	(CIO2_REG_MIPIBE_BASE + 0x20)
+#define CIO2_REG_MIPIBE_FORCE_RAW8_ENABLE		BIT(0)
+#define CIO2_REG_MIPIBE_FORCE_RAW8_USE_TYPEID		BIT(1)
+#define CIO2_REG_MIPIBE_FORCE_RAW8_TYPEID_SHIFT		2U
+
+#define CIO2_REG_MIPIBE_IRQ_STATUS	(CIO2_REG_MIPIBE_BASE + 0x24)
+#define CIO2_REG_MIPIBE_IRQ_CLEAR	(CIO2_REG_MIPIBE_BASE + 0x28)
+#define CIO2_REG_MIPIBE_GLOBAL_LUT_DISREGARD (CIO2_REG_MIPIBE_BASE + 0x68)
+#define CIO2_MIPIBE_GLOBAL_LUT_DISREGARD		1U
+#define CIO2_REG_MIPIBE_PKT_STALL_STATUS (CIO2_REG_MIPIBE_BASE + 0x6c)
+#define CIO2_REG_MIPIBE_PARSE_GSP_THROUGH_LP_LUT_REG_IDX \
+					(CIO2_REG_MIPIBE_BASE + 0x70)
+#define CIO2_REG_MIPIBE_SP_LUT_ENTRY(vc) \
+				       (CIO2_REG_MIPIBE_BASE + 0x74 + 4 * (vc))
+#define CIO2_REG_MIPIBE_LP_LUT_ENTRY(m)	/* m = 0..15 */ \
+					(CIO2_REG_MIPIBE_BASE + 0x84 + 4 * (m))
+#define CIO2_MIPIBE_LP_LUT_ENTRY_DISREGARD		1U
+#define CIO2_MIPIBE_LP_LUT_ENTRY_SID_SHIFT		1U
+#define CIO2_MIPIBE_LP_LUT_ENTRY_VC_SHIFT		5U
+#define CIO2_MIPIBE_LP_LUT_ENTRY_FORMAT_TYPE_SHIFT	7U
+
+/* base register: CIO2_REG_PIPE_BASE(pipe) * CIO2_REG_IRQCTRL_BASE */
+/* IRQ registers are 18-bit wide, see cio2_irq_error for bit definitions */
+#define CIO2_REG_IRQCTRL_EDGE		(CIO2_REG_IRQCTRL_BASE + 0x00)
+#define CIO2_REG_IRQCTRL_MASK		(CIO2_REG_IRQCTRL_BASE + 0x04)
+#define CIO2_REG_IRQCTRL_STATUS		(CIO2_REG_IRQCTRL_BASE + 0x08)
+#define CIO2_REG_IRQCTRL_CLEAR		(CIO2_REG_IRQCTRL_BASE + 0x0c)
+#define CIO2_REG_IRQCTRL_ENABLE		(CIO2_REG_IRQCTRL_BASE + 0x10)
+#define CIO2_REG_IRQCTRL_LEVEL_NOT_PULSE	(CIO2_REG_IRQCTRL_BASE + 0x14)
+
+#define CIO2_REG_GPREG_SRST		(CIO2_REG_GPREG_BASE + 0x0)
+#define CIO2_GPREG_SRST_ALL				0xffff	/* Reset all */
+#define CIO2_REG_FB_HPLL_FREQ		(CIO2_REG_GPREG_BASE + 0x08)
+#define CIO2_REG_ISCLK_RATIO		(CIO2_REG_GPREG_BASE + 0xc)
+
+#define CIO2_REG_CGC					0x1400
+#define CIO2_CGC_CSI2_TGE				BIT(0)
+#define CIO2_CGC_PRIM_TGE				BIT(1)
+#define CIO2_CGC_SIDE_TGE				BIT(2)
+#define CIO2_CGC_XOSC_TGE				BIT(3)
+#define CIO2_CGC_MPLL_SHUTDOWN_EN			BIT(4)
+#define CIO2_CGC_D3I3_TGE				BIT(5)
+#define CIO2_CGC_CSI2_INTERFRAME_TGE			BIT(6)
+#define CIO2_CGC_CSI2_PORT_DCGE				BIT(8)
+#define CIO2_CGC_CSI2_DCGE				BIT(9)
+#define CIO2_CGC_SIDE_DCGE				BIT(10)
+#define CIO2_CGC_PRIM_DCGE				BIT(11)
+#define CIO2_CGC_ROSC_DCGE				BIT(12)
+#define CIO2_CGC_XOSC_DCGE				BIT(13)
+#define CIO2_CGC_FLIS_DCGE				BIT(14)
+#define CIO2_CGC_CLKGATE_HOLDOFF_SHIFT			20U
+#define CIO2_CGC_CSI_CLKGATE_HOLDOFF_SHIFT		24U
+#define CIO2_REG_D0I3C					0x1408
+#define CIO2_D0I3C_I3					BIT(2)	/* Set D0I3 */
+#define CIO2_D0I3C_RR					BIT(3)	/* Restore? */
+#define CIO2_REG_SWRESET				0x140c
+#define CIO2_SWRESET_SWRESET				1U
+#define CIO2_REG_SENSOR_ACTIVE				0x1410
+#define CIO2_REG_INT_STS				0x1414
+#define CIO2_REG_INT_STS_EXT_OE				0x1418
+#define CIO2_INT_EXT_OE_DMAOE_SHIFT			0U
+#define CIO2_INT_EXT_OE_DMAOE_MASK			0x7ffff
+#define CIO2_INT_EXT_OE_OES_SHIFT			24U
+#define CIO2_INT_EXT_OE_OES_MASK	(0xf << CIO2_INT_EXT_OE_OES_SHIFT)
+#define CIO2_REG_INT_EN					0x1420
+#define CIO2_REG_INT_EN_IRQ				(1 << 24)
+#define CIO2_REG_INT_EN_IOS(dma)	(1U << (((dma) >> 1U) + 12U))
+/*
+ * Interrupt on completion bit, Eg. DMA 0-3 maps to bit 0-3,
+ * DMA4 & DMA5 map to bit 4 ... DMA18 & DMA19 map to bit 11 Et cetera
+ */
+#define CIO2_INT_IOC(dma)	(1U << ((dma) < 4U ? (dma) : ((dma) >> 1U) + 2U))
+#define CIO2_INT_IOC_SHIFT				0
+#define CIO2_INT_IOC_MASK		(0x7ff << CIO2_INT_IOC_SHIFT)
+#define CIO2_INT_IOS_IOLN(dma)		(1U << (((dma) >> 1U) + 12U))
+#define CIO2_INT_IOS_IOLN_SHIFT				12
+#define CIO2_INT_IOS_IOLN_MASK		(0x3ff << CIO2_INT_IOS_IOLN_SHIFT)
+#define CIO2_INT_IOIE					BIT(22)
+#define CIO2_INT_IOOE					BIT(23)
+#define CIO2_INT_IOIRQ					BIT(24)
+#define CIO2_REG_INT_EN_EXT_OE				0x1424
+#define CIO2_REG_DMA_DBG				0x1448
+#define CIO2_REG_DMA_DBG_DMA_INDEX_SHIFT		0U
+#define CIO2_REG_PBM_ARB_CTRL				0x1460
+#define CIO2_PBM_ARB_CTRL_LANES_DIV			0U /* 4-4-2-2 lanes */
+#define CIO2_PBM_ARB_CTRL_LANES_DIV_SHIFT		0U
+#define CIO2_PBM_ARB_CTRL_LE_EN				BIT(7)
+#define CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN		2U
+#define CIO2_PBM_ARB_CTRL_PLL_POST_SHTDN_SHIFT		8U
+#define CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP			480U
+#define CIO2_PBM_ARB_CTRL_PLL_AHD_WK_UP_SHIFT		16U
+#define CIO2_REG_PBM_WMCTRL1				0x1464
+#define CIO2_PBM_WMCTRL1_MIN_2CK_SHIFT			0U
+#define CIO2_PBM_WMCTRL1_MID1_2CK_SHIFT			8U
+#define CIO2_PBM_WMCTRL1_MID2_2CK_SHIFT			16U
+#define CIO2_PBM_WMCTRL1_TS_COUNT_DISABLE		BIT(31)
+#define CIO2_PBM_WMCTRL1_MIN_2CK	(4 << CIO2_PBM_WMCTRL1_MIN_2CK_SHIFT)
+#define CIO2_PBM_WMCTRL1_MID1_2CK	(16 << CIO2_PBM_WMCTRL1_MID1_2CK_SHIFT)
+#define CIO2_PBM_WMCTRL1_MID2_2CK	(21 << CIO2_PBM_WMCTRL1_MID2_2CK_SHIFT)
+#define CIO2_REG_PBM_WMCTRL2				0x1468
+#define CIO2_PBM_WMCTRL2_HWM_2CK			40U
+#define CIO2_PBM_WMCTRL2_HWM_2CK_SHIFT			0U
+#define CIO2_PBM_WMCTRL2_LWM_2CK			22U
+#define CIO2_PBM_WMCTRL2_LWM_2CK_SHIFT			8U
+#define CIO2_PBM_WMCTRL2_OBFFWM_2CK			2U
+#define CIO2_PBM_WMCTRL2_OBFFWM_2CK_SHIFT		16U
+#define CIO2_PBM_WMCTRL2_TRANSDYN			1U
+#define CIO2_PBM_WMCTRL2_TRANSDYN_SHIFT			24U
+#define CIO2_PBM_WMCTRL2_DYNWMEN			BIT(28)
+#define CIO2_PBM_WMCTRL2_OBFF_MEM_EN			BIT(29)
+#define CIO2_PBM_WMCTRL2_OBFF_CPU_EN			BIT(30)
+#define CIO2_PBM_WMCTRL2_DRAINNOW			BIT(31)
+#define CIO2_REG_PBM_TS_COUNT				0x146c
+#define CIO2_REG_PBM_FOPN_ABORT				0x1474
+/* below n = 0..3 */
+#define CIO2_PBM_FOPN_ABORT(n)				(0x1 << 8U * (n))
+#define CIO2_PBM_FOPN_FORCE_ABORT(n)			(0x2 << 8U * (n))
+#define CIO2_PBM_FOPN_FRAMEOPEN(n)			(0x8 << 8U * (n))
+#define CIO2_REG_LTRCTRL				0x1480
+#define CIO2_LTRCTRL_LTRDYNEN				BIT(16)
+#define CIO2_LTRCTRL_LTRSTABLETIME_SHIFT		8U
+#define CIO2_LTRCTRL_LTRSTABLETIME_MASK			0xff
+#define CIO2_LTRCTRL_LTRSEL1S3				BIT(7)
+#define CIO2_LTRCTRL_LTRSEL1S2				BIT(6)
+#define CIO2_LTRCTRL_LTRSEL1S1				BIT(5)
+#define CIO2_LTRCTRL_LTRSEL1S0				BIT(4)
+#define CIO2_LTRCTRL_LTRSEL2S3				BIT(3)
+#define CIO2_LTRCTRL_LTRSEL2S2				BIT(2)
+#define CIO2_LTRCTRL_LTRSEL2S1				BIT(1)
+#define CIO2_LTRCTRL_LTRSEL2S0				BIT(0)
+#define CIO2_REG_LTRVAL23				0x1484
+#define CIO2_REG_LTRVAL01				0x1488
+#define CIO2_LTRVAL02_VAL_SHIFT				0U
+#define CIO2_LTRVAL02_SCALE_SHIFT			10U
+#define CIO2_LTRVAL13_VAL_SHIFT				16U
+#define CIO2_LTRVAL13_SCALE_SHIFT			26U
+
+#define CIO2_LTRVAL0_VAL				175U
+/* Value times 1024 ns */
+#define CIO2_LTRVAL0_SCALE				2U
+#define CIO2_LTRVAL1_VAL				90U
+#define CIO2_LTRVAL1_SCALE				2U
+#define CIO2_LTRVAL2_VAL				90U
+#define CIO2_LTRVAL2_SCALE				2U
+#define CIO2_LTRVAL3_VAL				90U
+#define CIO2_LTRVAL3_SCALE				2U
+
+#define CIO2_REG_CDMABA(n)		(0x1500 + 0x10 * (n))	/* n = 0..19 */
+#define CIO2_REG_CDMARI(n)		(0x1504 + 0x10 * (n))
+#define CIO2_CDMARI_FBPT_RP_SHIFT			0U
+#define CIO2_CDMARI_FBPT_RP_MASK			0xff
+#define CIO2_REG_CDMAC0(n)		(0x1508 + 0x10 * (n))
+#define CIO2_CDMAC0_FBPT_LEN_SHIFT			0U
+#define CIO2_CDMAC0_FBPT_WIDTH_SHIFT			8U
+#define CIO2_CDMAC0_FBPT_NS				BIT(25)
+#define CIO2_CDMAC0_DMA_INTR_ON_FS			BIT(26)
+#define CIO2_CDMAC0_DMA_INTR_ON_FE			BIT(27)
+#define CIO2_CDMAC0_FBPT_UPDATE_FIFO_FULL		BIT(28)
+#define CIO2_CDMAC0_FBPT_FIFO_FULL_FIX_DIS		BIT(29)
+#define CIO2_CDMAC0_DMA_EN				BIT(30)
+#define CIO2_CDMAC0_DMA_HALTED				BIT(31)
+#define CIO2_REG_CDMAC1(n)		(0x150c + 0x10 * (n))
+#define CIO2_CDMAC1_LINENUMINT_SHIFT			0U
+#define CIO2_CDMAC1_LINENUMUPDATE_SHIFT			16U
+/* n = 0..3 */
+#define CIO2_REG_PXM_PXF_FMT_CFG0(n)	(0x1700 + 0x30 * (n))
+#define CIO2_PXM_PXF_FMT_CFG_SID0_SHIFT			0U
+#define CIO2_PXM_PXF_FMT_CFG_SID1_SHIFT			16U
+#define CIO2_PXM_PXF_FMT_CFG_PCK_64B			(0 << 0)
+#define CIO2_PXM_PXF_FMT_CFG_PCK_32B			(1 << 0)
+#define CIO2_PXM_PXF_FMT_CFG_BPP_08			(0 << 2)
+#define CIO2_PXM_PXF_FMT_CFG_BPP_10			(1 << 2)
+#define CIO2_PXM_PXF_FMT_CFG_BPP_12			(2 << 2)
+#define CIO2_PXM_PXF_FMT_CFG_BPP_14			(3 << 2)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_4PPC			(0 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_3PPC_RGBA		(1 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_3PPC_ARGB		(2 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_PLANAR2		(3 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_PLANAR3		(4 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_SPEC_NV16			(5 << 4)
+#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_1ST_AB		(1 << 7)
+#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_1ST_CD		(1 << 8)
+#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_2ND_AC		(1 << 9)
+#define CIO2_PXM_PXF_FMT_CFG_PSWAP4_2ND_BD		(1 << 10)
+#define CIO2_REG_INT_STS_EXT_IE				0x17e4
+#define CIO2_REG_INT_EN_EXT_IE				0x17e8
+#define CIO2_INT_EXT_IE_ECC_RE(n)			(0x01 << (8U * (n)))
+#define CIO2_INT_EXT_IE_DPHY_NR(n)			(0x02 << (8U * (n)))
+#define CIO2_INT_EXT_IE_ECC_NR(n)			(0x04 << (8U * (n)))
+#define CIO2_INT_EXT_IE_CRCERR(n)			(0x08 << (8U * (n)))
+#define CIO2_INT_EXT_IE_INTERFRAMEDATA(n)		(0x10 << (8U * (n)))
+#define CIO2_INT_EXT_IE_PKT2SHORT(n)			(0x20 << (8U * (n)))
+#define CIO2_INT_EXT_IE_PKT2LONG(n)			(0x40 << (8U * (n)))
+#define CIO2_INT_EXT_IE_IRQ(n)				(0x80 << (8U * (n)))
+#define CIO2_REG_PXM_FRF_CFG(n)				(0x1720 + 0x30 * (n))
+#define CIO2_PXM_FRF_CFG_FNSEL				BIT(0)
+#define CIO2_PXM_FRF_CFG_FN_RST				BIT(1)
+#define CIO2_PXM_FRF_CFG_ABORT				BIT(2)
+#define CIO2_PXM_FRF_CFG_CRC_TH_SHIFT			3U
+#define CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NR		BIT(8)
+#define CIO2_PXM_FRF_CFG_MSK_ECC_RE			BIT(9)
+#define CIO2_PXM_FRF_CFG_MSK_ECC_DPHY_NE		BIT(10)
+#define CIO2_PXM_FRF_CFG_EVEN_ODD_MODE_SHIFT		11U
+#define CIO2_PXM_FRF_CFG_MASK_CRC_THRES			BIT(13)
+#define CIO2_PXM_FRF_CFG_MASK_CSI_ACCEPT		BIT(14)
+#define CIO2_PXM_FRF_CFG_CIOHC_FS_MODE			BIT(15)
+#define CIO2_PXM_FRF_CFG_CIOHC_FRST_FRM_SHIFT		16U
+#define CIO2_REG_PXM_SID2BID0(n)			(0x1724 + 0x30 * (n))
+#define CIO2_FB_HPLL_FREQ				0x2
+#define CIO2_ISCLK_RATIO				0xc
+
+#define CIO2_IRQCTRL_MASK				0x3ffff
+
+#define CIO2_INT_EN_EXT_OE_MASK				0x8f0fffff
+
+#define CIO2_CGC_CLKGATE_HOLDOFF			3U
+#define CIO2_CGC_CSI_CLKGATE_HOLDOFF			5U
+
+#define CIO2_PXM_FRF_CFG_CRC_TH				16
+
+#define CIO2_INT_EN_EXT_IE_MASK				0xffffffff
+
+#define CIO2_DMA_CHAN					0U
+
+#define CIO2_CSIRX_DLY_CNT_CLANE_IDX			-1
+
+#define CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_A		0
+#define CIO2_CSIRX_DLY_CNT_TERMEN_CLANE_B		0
+#define CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_A		95
+#define CIO2_CSIRX_DLY_CNT_SETTLE_CLANE_B		-8
+
+#define CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_A		0
+#define CIO2_CSIRX_DLY_CNT_TERMEN_DLANE_B		0
+#define CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_A		85
+#define CIO2_CSIRX_DLY_CNT_SETTLE_DLANE_B		-2
+
+#define CIO2_CSIRX_DLY_CNT_TERMEN_DEFAULT		0x4
+#define CIO2_CSIRX_DLY_CNT_SETTLE_DEFAULT		0x570
+
+#define CIO2_PMCSR_OFFSET				4U
+#define CIO2_PMCSR_D0D3_SHIFT				2U
+#define CIO2_PMCSR_D3					0x3
+
+struct cio2_csi2_timing {
+	s32 clk_termen;
+	s32 clk_settle;
+	s32 dat_termen;
+	s32 dat_settle;
+};
+
+struct cio2_buffer {
+	struct vb2_v4l2_buffer vbb;
+	u32 *lop[CIO2_MAX_LOPS];
+	dma_addr_t lop_bus_addr[CIO2_MAX_LOPS];
+	unsigned int offset;
+};
+
+#define to_cio2_buffer(vb)	container_of(vb, struct cio2_buffer, vbb.vb2_buf)
+
+struct csi2_bus_info {
+	u32 port;
+	u32 lanes;
+};
+
+struct cio2_queue {
+	/* mutex to be used by vb2_queue */
+	struct mutex lock;
+	struct media_pipeline pipe;
+	struct csi2_bus_info csi2;
+	struct v4l2_subdev *sensor;
+	void __iomem *csi_rx_base;
+
+	/* Subdev, /dev/v4l-subdevX */
+	struct v4l2_subdev subdev;
+	struct mutex subdev_lock; /* Serialise acces to subdev_fmt field */
+	struct media_pad subdev_pads[CIO2_PADS];
+	struct v4l2_mbus_framefmt subdev_fmt;
+	atomic_t frame_sequence;
+
+	/* Video device, /dev/videoX */
+	struct video_device vdev;
+	struct media_pad vdev_pad;
+	struct v4l2_pix_format_mplane format;
+	struct vb2_queue vbq;
+
+	/* Buffer queue handling */
+	struct cio2_fbpt_entry *fbpt;	/* Frame buffer pointer table */
+	dma_addr_t fbpt_bus_addr;
+	struct cio2_buffer *bufs[CIO2_MAX_BUFFERS];
+	unsigned int bufs_first;	/* Index of the first used entry */
+	unsigned int bufs_next;	/* Index of the first unused entry */
+	atomic_t bufs_queued;
+};
+
+struct cio2_device {
+	struct pci_dev *pci_dev;
+	void __iomem *base;
+	struct v4l2_device v4l2_dev;
+	struct cio2_queue queue[CIO2_QUEUES];
+	struct cio2_queue *cur_queue;
+	/* mutex to be used by video_device */
+	struct mutex lock;
+
+	bool streaming;
+	struct v4l2_async_notifier notifier;
+	struct media_device media_dev;
+
+	/*
+	 * Safety net to catch DMA fetch ahead
+	 * when reaching the end of LOP
+	 */
+	void *dummy_page;
+	/* DMA handle of dummy_page */
+	dma_addr_t dummy_page_bus_addr;
+	/* single List of Pointers (LOP) page */
+	u32 *dummy_lop;
+	/* DMA handle of dummy_lop */
+	dma_addr_t dummy_lop_bus_addr;
+};
+
+#define to_cio2_device(n)	container_of(n, struct cio2_device, notifier)
+
+/**************** Virtual channel ****************/
+/*
+ * This should come from sensor driver. No
+ * driver interface nor requirement yet.
+ */
+#define SENSOR_VIR_CH_DFLT		0
+
+/**************** FBPT operations ****************/
+#define CIO2_FBPT_SIZE			(CIO2_MAX_BUFFERS * CIO2_MAX_LOPS * \
+					 sizeof(struct cio2_fbpt_entry))
+
+#define CIO2_FBPT_SUBENTRY_UNIT		4
+
+/* cio2 fbpt first_entry ctrl status */
+#define CIO2_FBPT_CTRL_VALID		BIT(0)
+#define CIO2_FBPT_CTRL_IOC		BIT(1)
+#define CIO2_FBPT_CTRL_IOS		BIT(2)
+#define CIO2_FBPT_CTRL_SUCCXFAIL	BIT(3)
+#define CIO2_FBPT_CTRL_CMPLCODE_SHIFT	4
+
+/*
+ * Frame Buffer Pointer Table(FBPT) entry
+ * each entry describe an output buffer and consists of
+ * several sub-entries
+ */
+struct __packed cio2_fbpt_entry {
+	union {
+		struct __packed {
+			u32 ctrl; /* status ctrl */
+			u16 cur_line_num; /* current line # written to DDR */
+			u16 frame_num; /* updated by DMA upon FE */
+			u32 first_page_offset; /* offset for 1st page in LOP */
+		} first_entry;
+		/* Second entry per buffer */
+		struct __packed {
+			u32 timestamp;
+			u32 num_of_bytes;
+			/* the number of bytes for write on last page */
+			u16 last_page_available_bytes;
+			/* the number of pages allocated for this buf */
+			u16 num_of_pages;
+		} second_entry;
+	};
+	u32 lop_page_addr;	/* Points to list of pointers (LOP) table */
+};
+
+static inline struct cio2_queue *file_to_cio2_queue(struct file *file)
+{
+	return container_of(video_devdata(file), struct cio2_queue, vdev);
+}
+
+static inline struct cio2_queue *vb2q_to_cio2_queue(struct vb2_queue *vq)
+{
+	return container_of(vq, struct cio2_queue, vbq);
+}
+
+#if IS_ENABLED(CONFIG_CIO2_BRIDGE)
+int cio2_bridge_init(struct pci_dev *cio2);
+#else
+static inline int cio2_bridge_init(struct pci_dev *cio2) { return 0; }
+#endif
+
+#endif