Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 418 insertions, 0 deletions

diff --git a/drivers/media/radio/saa7706h.c b/drivers/media/radio/saa7706h.c
new file mode 100644
index 000000000..f9e990a9c
--- /dev/null
+++ b/drivers/media/radio/saa7706h.c
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * saa7706.c Philips SAA7706H Car Radio DSP driver
+ * Copyright (c) 2009 Intel Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+
+#define DRIVER_NAME "saa7706h"
+
+/* the I2C memory map looks like this
+
+	$1C00 - $FFFF Not Used
+	$2200 - $3FFF Reserved YRAM (DSP2) space
+	$2000 - $21FF YRAM (DSP2)
+	$1FF0 - $1FFF Hardware Registers
+	$1280 - $1FEF Reserved XRAM (DSP2) space
+	$1000 - $127F XRAM (DSP2)
+	$0FFF        DSP CONTROL
+	$0A00 - $0FFE Reserved
+	$0980 - $09FF Reserved YRAM (DSP1) space
+	$0800 - $097F YRAM (DSP1)
+	$0200 - $07FF Not Used
+	$0180 - $01FF Reserved XRAM (DSP1) space
+	$0000 - $017F XRAM (DSP1)
+*/
+
+#define SAA7706H_REG_CTRL		0x0fff
+#define SAA7706H_CTRL_BYP_PLL		0x0001
+#define SAA7706H_CTRL_PLL_DIV_MASK	0x003e
+#define SAA7706H_CTRL_PLL3_62975MHZ	0x003e
+#define SAA7706H_CTRL_DSP_TURBO		0x0040
+#define SAA7706H_CTRL_PC_RESET_DSP1	0x0080
+#define SAA7706H_CTRL_PC_RESET_DSP2	0x0100
+#define SAA7706H_CTRL_DSP1_ROM_EN_MASK	0x0600
+#define SAA7706H_CTRL_DSP1_FUNC_PROM	0x0000
+#define SAA7706H_CTRL_DSP2_ROM_EN_MASK	0x1800
+#define SAA7706H_CTRL_DSP2_FUNC_PROM	0x0000
+#define SAA7706H_CTRL_DIG_SIL_INTERPOL	0x8000
+
+#define SAA7706H_REG_EVALUATION			0x1ff0
+#define SAA7706H_EVAL_DISABLE_CHARGE_PUMP	0x000001
+#define SAA7706H_EVAL_DCS_CLOCK			0x000002
+#define SAA7706H_EVAL_GNDRC1_ENABLE		0x000004
+#define SAA7706H_EVAL_GNDRC2_ENABLE		0x000008
+
+#define SAA7706H_REG_CL_GEN1			0x1ff3
+#define SAA7706H_CL_GEN1_MIN_LOOPGAIN_MASK	0x00000f
+#define SAA7706H_CL_GEN1_LOOPGAIN_MASK		0x0000f0
+#define SAA7706H_CL_GEN1_COARSE_RATION		0xffff00
+
+#define SAA7706H_REG_CL_GEN2			0x1ff4
+#define SAA7706H_CL_GEN2_WSEDGE_FALLING		0x000001
+#define SAA7706H_CL_GEN2_STOP_VCO		0x000002
+#define SAA7706H_CL_GEN2_FRERUN			0x000004
+#define SAA7706H_CL_GEN2_ADAPTIVE		0x000008
+#define SAA7706H_CL_GEN2_FINE_RATIO_MASK	0x0ffff0
+
+#define SAA7706H_REG_CL_GEN4		0x1ff6
+#define SAA7706H_CL_GEN4_BYPASS_PLL1	0x001000
+#define SAA7706H_CL_GEN4_PLL1_DIV_MASK	0x03e000
+#define SAA7706H_CL_GEN4_DSP1_TURBO	0x040000
+
+#define SAA7706H_REG_SEL	0x1ff7
+#define SAA7706H_SEL_DSP2_SRCA_MASK	0x000007
+#define SAA7706H_SEL_DSP2_FMTA_MASK	0x000031
+#define SAA7706H_SEL_DSP2_SRCB_MASK	0x0001c0
+#define SAA7706H_SEL_DSP2_FMTB_MASK	0x000e00
+#define SAA7706H_SEL_DSP1_SRC_MASK	0x003000
+#define SAA7706H_SEL_DSP1_FMT_MASK	0x01c003
+#define SAA7706H_SEL_SPDIF2		0x020000
+#define SAA7706H_SEL_HOST_IO_FMT_MASK	0x1c0000
+#define SAA7706H_SEL_EN_HOST_IO		0x200000
+
+#define SAA7706H_REG_IAC		0x1ff8
+#define SAA7706H_REG_CLK_SET		0x1ff9
+#define SAA7706H_REG_CLK_COEFF		0x1ffa
+#define SAA7706H_REG_INPUT_SENS		0x1ffb
+#define SAA7706H_INPUT_SENS_RDS_VOL_MASK	0x0003f
+#define SAA7706H_INPUT_SENS_FM_VOL_MASK		0x00fc0
+#define SAA7706H_INPUT_SENS_FM_MPX		0x01000
+#define SAA7706H_INPUT_SENS_OFF_FILTER_A_EN	0x02000
+#define SAA7706H_INPUT_SENS_OFF_FILTER_B_EN	0x04000
+#define SAA7706H_REG_PHONE_NAV_AUDIO	0x1ffc
+#define SAA7706H_REG_IO_CONF_DSP2	0x1ffd
+#define SAA7706H_REG_STATUS_DSP2	0x1ffe
+#define SAA7706H_REG_PC_DSP2		0x1fff
+
+#define SAA7706H_DSP1_MOD0	0x0800
+#define SAA7706H_DSP1_ROM_VER	0x097f
+#define SAA7706H_DSP2_MPTR0	0x1000
+
+#define SAA7706H_DSP1_MODPNTR	0x0000
+
+#define SAA7706H_DSP2_XMEM_CONTLLCW	0x113e
+#define SAA7706H_DSP2_XMEM_BUSAMP	0x114a
+#define SAA7706H_DSP2_XMEM_FDACPNTR	0x11f9
+#define SAA7706H_DSP2_XMEM_IIS1PNTR	0x11fb
+
+#define SAA7706H_DSP2_YMEM_PVGA		0x212a
+#define SAA7706H_DSP2_YMEM_PVAT1	0x212b
+#define SAA7706H_DSP2_YMEM_PVAT		0x212c
+#define SAA7706H_DSP2_YMEM_ROM_VER	0x21ff
+
+#define SUPPORTED_DSP1_ROM_VER		0x667
+
+struct saa7706h_state {
+	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
+	unsigned muted;
+};
+
+static inline struct saa7706h_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct saa7706h_state, sd);
+}
+
+static int saa7706h_i2c_send(struct i2c_client *client, const u8 *data, int len)
+{
+	int err = i2c_master_send(client, data, len);
+	if (err == len)
+		return 0;
+	return err > 0 ? -EIO : err;
+}
+
+static int saa7706h_i2c_transfer(struct i2c_client *client,
+	struct i2c_msg *msgs, int num)
+{
+	int err = i2c_transfer(client->adapter, msgs, num);
+	if (err == num)
+		return 0;
+	return err > 0 ? -EIO : err;
+}
+
+static int saa7706h_set_reg24(struct v4l2_subdev *sd, u16 reg, u32 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u8 buf[5];
+	int pos = 0;
+
+	buf[pos++] = reg >> 8;
+	buf[pos++] = reg;
+	buf[pos++] = val >> 16;
+	buf[pos++] = val >> 8;
+	buf[pos++] = val;
+
+	return saa7706h_i2c_send(client, buf, pos);
+}
+
+static int saa7706h_set_reg24_err(struct v4l2_subdev *sd, u16 reg, u32 val,
+	int *err)
+{
+	return *err ? *err : saa7706h_set_reg24(sd, reg, val);
+}
+
+static int saa7706h_set_reg16(struct v4l2_subdev *sd, u16 reg, u16 val)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u8 buf[4];
+	int pos = 0;
+
+	buf[pos++] = reg >> 8;
+	buf[pos++] = reg;
+	buf[pos++] = val >> 8;
+	buf[pos++] = val;
+
+	return saa7706h_i2c_send(client, buf, pos);
+}
+
+static int saa7706h_set_reg16_err(struct v4l2_subdev *sd, u16 reg, u16 val,
+	int *err)
+{
+	return *err ? *err : saa7706h_set_reg16(sd, reg, val);
+}
+
+static int saa7706h_get_reg16(struct v4l2_subdev *sd, u16 reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	u8 buf[2];
+	int err;
+	u8 regaddr[] = {reg >> 8, reg};
+	struct i2c_msg msg[] = {
+					{
+						.addr = client->addr,
+						.len = sizeof(regaddr),
+						.buf = regaddr
+					},
+					{
+						.addr = client->addr,
+						.flags = I2C_M_RD,
+						.len = sizeof(buf),
+						.buf = buf
+					}
+				};
+
+	err = saa7706h_i2c_transfer(client, msg, ARRAY_SIZE(msg));
+	if (err)
+		return err;
+
+	return buf[0] << 8 | buf[1];
+}
+
+static int saa7706h_unmute(struct v4l2_subdev *sd)
+{
+	struct saa7706h_state *state = to_state(sd);
+	int err = 0;
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL,
+		SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 |
+		SAA7706H_CTRL_PC_RESET_DSP2, &err);
+
+	/* newer versions of the chip requires a small sleep after reset */
+	msleep(1);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL,
+		SAA7706H_CTRL_PLL3_62975MHZ, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_EVALUATION, 0, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN1, 0x040022, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN2,
+		SAA7706H_CL_GEN2_WSEDGE_FALLING, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN4, 0x024080, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_SEL, 0x200080, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IAC, 0xf4caed, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_SET, 0x124334, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_COEFF, 0x004a1a,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_INPUT_SENS, 0x0071c7,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PHONE_NAV_AUDIO,
+		0x0e22ff, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IO_CONF_DSP2, 0x001ff8,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_STATUS_DSP2, 0x080003,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PC_DSP2, 0x000004, &err);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_DSP1_MOD0, 0x0c6c, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_MPTR0, 0x000b4b, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x000600, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x0000c0, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000819,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x00085a,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_BUSAMP, 0x7fffff,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_FDACPNTR, 0x2000cb,
+		&err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_IIS1PNTR, 0x2000cb,
+		&err);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVGA, 0x0f80, &err);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT1, 0x0800,
+		&err);
+
+	err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT, 0x0800, &err);
+
+	err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000905,
+		&err);
+	if (!err)
+		state->muted = 0;
+	return err;
+}
+
+static int saa7706h_mute(struct v4l2_subdev *sd)
+{
+	struct saa7706h_state *state = to_state(sd);
+	int err;
+
+	err = saa7706h_set_reg16(sd, SAA7706H_REG_CTRL,
+		SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 |
+		SAA7706H_CTRL_PC_RESET_DSP2);
+	if (!err)
+		state->muted = 1;
+	return err;
+}
+
+static int saa7706h_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct saa7706h_state *state =
+		container_of(ctrl->handler, struct saa7706h_state, hdl);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		if (ctrl->val)
+			return saa7706h_mute(&state->sd);
+		return saa7706h_unmute(&state->sd);
+	}
+	return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops saa7706h_ctrl_ops = {
+	.s_ctrl = saa7706h_s_ctrl,
+};
+
+static const struct v4l2_subdev_ops empty_ops = {};
+
+/*
+ * Generic i2c probe
+ * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
+ */
+
+static int saa7706h_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct saa7706h_state *state;
+	struct v4l2_subdev *sd;
+	int err;
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	v4l_info(client, "chip found @ 0x%02x (%s)\n",
+			client->addr << 1, client->adapter->name);
+
+	state = kzalloc(sizeof(struct saa7706h_state), GFP_KERNEL);
+	if (state == NULL)
+		return -ENOMEM;
+	sd = &state->sd;
+	v4l2_i2c_subdev_init(sd, client, &empty_ops);
+
+	v4l2_ctrl_handler_init(&state->hdl, 4);
+	v4l2_ctrl_new_std(&state->hdl, &saa7706h_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	sd->ctrl_handler = &state->hdl;
+	err = state->hdl.error;
+	if (err)
+		goto err;
+
+	/* check the rom versions */
+	err = saa7706h_get_reg16(sd, SAA7706H_DSP1_ROM_VER);
+	if (err < 0)
+		goto err;
+	if (err != SUPPORTED_DSP1_ROM_VER)
+		v4l2_warn(sd, "Unknown DSP1 ROM code version: 0x%x\n", err);
+	state->muted = 1;
+
+	/* startup in a muted state */
+	err = saa7706h_mute(sd);
+	if (err)
+		goto err;
+
+	return 0;
+
+err:
+	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(&state->hdl);
+	kfree(to_state(sd));
+
+	printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", err);
+
+	return err;
+}
+
+static void saa7706h_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct saa7706h_state *state = to_state(sd);
+
+	saa7706h_mute(sd);
+	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(&state->hdl);
+	kfree(to_state(sd));
+}
+
+static const struct i2c_device_id saa7706h_id[] = {
+	{DRIVER_NAME, 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, saa7706h_id);
+
+static struct i2c_driver saa7706h_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+	},
+	.probe		= saa7706h_probe,
+	.remove		= saa7706h_remove,
+	.id_table	= saa7706h_id,
+};
+
+module_i2c_driver(saa7706h_driver);
+
+MODULE_DESCRIPTION("SAA7706H Car Radio DSP driver");
+MODULE_AUTHOR("Mocean Laboratories");
+MODULE_LICENSE("GPL v2");