Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 668 insertions, 0 deletions

diff --git a/drivers/media/rc/fintek-cir.c b/drivers/media/rc/fintek-cir.c
new file mode 100644
index 000000000..3fb0968ef
--- /dev/null
+++ b/drivers/media/rc/fintek-cir.c
@@ -0,0 +1,668 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR
+ *
+ * Copyright (C) 2011 Jarod Wilson <jarod@redhat.com>
+ *
+ * Special thanks to Fintek for providing hardware and spec sheets.
+ * This driver is based upon the nuvoton, ite and ene drivers for
+ * similar hardware.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <media/rc-core.h>
+
+#include "fintek-cir.h"
+
+/* write val to config reg */
+static inline void fintek_cr_write(struct fintek_dev *fintek, u8 val, u8 reg)
+{
+	fit_dbg("%s: reg 0x%02x, val 0x%02x  (ip/dp: %02x/%02x)",
+		__func__, reg, val, fintek->cr_ip, fintek->cr_dp);
+	outb(reg, fintek->cr_ip);
+	outb(val, fintek->cr_dp);
+}
+
+/* read val from config reg */
+static inline u8 fintek_cr_read(struct fintek_dev *fintek, u8 reg)
+{
+	u8 val;
+
+	outb(reg, fintek->cr_ip);
+	val = inb(fintek->cr_dp);
+
+	fit_dbg("%s: reg 0x%02x, val 0x%02x  (ip/dp: %02x/%02x)",
+		__func__, reg, val, fintek->cr_ip, fintek->cr_dp);
+	return val;
+}
+
+/* update config register bit without changing other bits */
+static inline void fintek_set_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg)
+{
+	u8 tmp = fintek_cr_read(fintek, reg) | val;
+	fintek_cr_write(fintek, tmp, reg);
+}
+
+/* enter config mode */
+static inline void fintek_config_mode_enable(struct fintek_dev *fintek)
+{
+	/* Enabling Config Mode explicitly requires writing 2x */
+	outb(CONFIG_REG_ENABLE, fintek->cr_ip);
+	outb(CONFIG_REG_ENABLE, fintek->cr_ip);
+}
+
+/* exit config mode */
+static inline void fintek_config_mode_disable(struct fintek_dev *fintek)
+{
+	outb(CONFIG_REG_DISABLE, fintek->cr_ip);
+}
+
+/*
+ * When you want to address a specific logical device, write its logical
+ * device number to GCR_LOGICAL_DEV_NO
+ */
+static inline void fintek_select_logical_dev(struct fintek_dev *fintek, u8 ldev)
+{
+	fintek_cr_write(fintek, ldev, GCR_LOGICAL_DEV_NO);
+}
+
+/* write val to cir config register */
+static inline void fintek_cir_reg_write(struct fintek_dev *fintek, u8 val, u8 offset)
+{
+	outb(val, fintek->cir_addr + offset);
+}
+
+/* read val from cir config register */
+static u8 fintek_cir_reg_read(struct fintek_dev *fintek, u8 offset)
+{
+	return inb(fintek->cir_addr + offset);
+}
+
+/* dump current cir register contents */
+static void cir_dump_regs(struct fintek_dev *fintek)
+{
+	fintek_config_mode_enable(fintek);
+	fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
+
+	pr_info("%s: Dump CIR logical device registers:\n", FINTEK_DRIVER_NAME);
+	pr_info(" * CR CIR BASE ADDR: 0x%x\n",
+		(fintek_cr_read(fintek, CIR_CR_BASE_ADDR_HI) << 8) |
+		fintek_cr_read(fintek, CIR_CR_BASE_ADDR_LO));
+	pr_info(" * CR CIR IRQ NUM:   0x%x\n",
+		fintek_cr_read(fintek, CIR_CR_IRQ_SEL));
+
+	fintek_config_mode_disable(fintek);
+
+	pr_info("%s: Dump CIR registers:\n", FINTEK_DRIVER_NAME);
+	pr_info(" * STATUS:     0x%x\n",
+		fintek_cir_reg_read(fintek, CIR_STATUS));
+	pr_info(" * CONTROL:    0x%x\n",
+		fintek_cir_reg_read(fintek, CIR_CONTROL));
+	pr_info(" * RX_DATA:    0x%x\n",
+		fintek_cir_reg_read(fintek, CIR_RX_DATA));
+	pr_info(" * TX_CONTROL: 0x%x\n",
+		fintek_cir_reg_read(fintek, CIR_TX_CONTROL));
+	pr_info(" * TX_DATA:    0x%x\n",
+		fintek_cir_reg_read(fintek, CIR_TX_DATA));
+}
+
+/* detect hardware features */
+static int fintek_hw_detect(struct fintek_dev *fintek)
+{
+	unsigned long flags;
+	u8 chip_major, chip_minor;
+	u8 vendor_major, vendor_minor;
+	u8 portsel, ir_class;
+	u16 vendor, chip;
+
+	fintek_config_mode_enable(fintek);
+
+	/* Check if we're using config port 0x4e or 0x2e */
+	portsel = fintek_cr_read(fintek, GCR_CONFIG_PORT_SEL);
+	if (portsel == 0xff) {
+		fit_pr(KERN_INFO, "first portsel read was bunk, trying alt");
+		fintek_config_mode_disable(fintek);
+		fintek->cr_ip = CR_INDEX_PORT2;
+		fintek->cr_dp = CR_DATA_PORT2;
+		fintek_config_mode_enable(fintek);
+		portsel = fintek_cr_read(fintek, GCR_CONFIG_PORT_SEL);
+	}
+	fit_dbg("portsel reg: 0x%02x", portsel);
+
+	ir_class = fintek_cir_reg_read(fintek, CIR_CR_CLASS);
+	fit_dbg("ir_class reg: 0x%02x", ir_class);
+
+	switch (ir_class) {
+	case CLASS_RX_2TX:
+	case CLASS_RX_1TX:
+		fintek->hw_tx_capable = true;
+		break;
+	case CLASS_RX_ONLY:
+	default:
+		fintek->hw_tx_capable = false;
+		break;
+	}
+
+	chip_major = fintek_cr_read(fintek, GCR_CHIP_ID_HI);
+	chip_minor = fintek_cr_read(fintek, GCR_CHIP_ID_LO);
+	chip  = chip_major << 8 | chip_minor;
+
+	vendor_major = fintek_cr_read(fintek, GCR_VENDOR_ID_HI);
+	vendor_minor = fintek_cr_read(fintek, GCR_VENDOR_ID_LO);
+	vendor = vendor_major << 8 | vendor_minor;
+
+	if (vendor != VENDOR_ID_FINTEK)
+		fit_pr(KERN_WARNING, "Unknown vendor ID: 0x%04x", vendor);
+	else
+		fit_dbg("Read Fintek vendor ID from chip");
+
+	fintek_config_mode_disable(fintek);
+
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+	fintek->chip_major  = chip_major;
+	fintek->chip_minor  = chip_minor;
+	fintek->chip_vendor = vendor;
+
+	/*
+	 * Newer reviews of this chipset uses port 8 instead of 5
+	 */
+	if ((chip != 0x0408) && (chip != 0x0804))
+		fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV2;
+	else
+		fintek->logical_dev_cir = LOGICAL_DEV_CIR_REV1;
+
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+
+	return 0;
+}
+
+static void fintek_cir_ldev_init(struct fintek_dev *fintek)
+{
+	/* Select CIR logical device and enable */
+	fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
+	fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
+
+	/* Write allocated CIR address and IRQ information to hardware */
+	fintek_cr_write(fintek, fintek->cir_addr >> 8, CIR_CR_BASE_ADDR_HI);
+	fintek_cr_write(fintek, fintek->cir_addr & 0xff, CIR_CR_BASE_ADDR_LO);
+
+	fintek_cr_write(fintek, fintek->cir_irq, CIR_CR_IRQ_SEL);
+
+	fit_dbg("CIR initialized, base io address: 0x%lx, irq: %d (len: %d)",
+		fintek->cir_addr, fintek->cir_irq, fintek->cir_port_len);
+}
+
+/* enable CIR interrupts */
+static void fintek_enable_cir_irq(struct fintek_dev *fintek)
+{
+	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_EN, CIR_STATUS);
+}
+
+static void fintek_cir_regs_init(struct fintek_dev *fintek)
+{
+	/* clear any and all stray interrupts */
+	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
+
+	/* and finally, enable interrupts */
+	fintek_enable_cir_irq(fintek);
+}
+
+static void fintek_enable_wake(struct fintek_dev *fintek)
+{
+	fintek_config_mode_enable(fintek);
+	fintek_select_logical_dev(fintek, LOGICAL_DEV_ACPI);
+
+	/* Allow CIR PME's to wake system */
+	fintek_set_reg_bit(fintek, ACPI_WAKE_EN_CIR_BIT, LDEV_ACPI_WAKE_EN_REG);
+	/* Enable CIR PME's */
+	fintek_set_reg_bit(fintek, ACPI_PME_CIR_BIT, LDEV_ACPI_PME_EN_REG);
+	/* Clear CIR PME status register */
+	fintek_set_reg_bit(fintek, ACPI_PME_CIR_BIT, LDEV_ACPI_PME_CLR_REG);
+	/* Save state */
+	fintek_set_reg_bit(fintek, ACPI_STATE_CIR_BIT, LDEV_ACPI_STATE_REG);
+
+	fintek_config_mode_disable(fintek);
+}
+
+static int fintek_cmdsize(u8 cmd, u8 subcmd)
+{
+	int datasize = 0;
+
+	switch (cmd) {
+	case BUF_COMMAND_NULL:
+		if (subcmd == BUF_HW_CMD_HEADER)
+			datasize = 1;
+		break;
+	case BUF_HW_CMD_HEADER:
+		if (subcmd == BUF_CMD_G_REVISION)
+			datasize = 2;
+		break;
+	case BUF_COMMAND_HEADER:
+		switch (subcmd) {
+		case BUF_CMD_S_CARRIER:
+		case BUF_CMD_S_TIMEOUT:
+		case BUF_RSP_PULSE_COUNT:
+			datasize = 2;
+			break;
+		case BUF_CMD_SIG_END:
+		case BUF_CMD_S_TXMASK:
+		case BUF_CMD_S_RXSENSOR:
+			datasize = 1;
+			break;
+		}
+	}
+
+	return datasize;
+}
+
+/* process ir data stored in driver buffer */
+static void fintek_process_rx_ir_data(struct fintek_dev *fintek)
+{
+	struct ir_raw_event rawir = {};
+	u8 sample;
+	bool event = false;
+	int i;
+
+	for (i = 0; i < fintek->pkts; i++) {
+		sample = fintek->buf[i];
+		switch (fintek->parser_state) {
+		case CMD_HEADER:
+			fintek->cmd = sample;
+			if ((fintek->cmd == BUF_COMMAND_HEADER) ||
+			    ((fintek->cmd & BUF_COMMAND_MASK) !=
+			     BUF_PULSE_BIT)) {
+				fintek->parser_state = SUBCMD;
+				continue;
+			}
+			fintek->rem = (fintek->cmd & BUF_LEN_MASK);
+			fit_dbg("%s: rem: 0x%02x", __func__, fintek->rem);
+			if (fintek->rem)
+				fintek->parser_state = PARSE_IRDATA;
+			else
+				ir_raw_event_overflow(fintek->rdev);
+			break;
+		case SUBCMD:
+			fintek->rem = fintek_cmdsize(fintek->cmd, sample);
+			fintek->parser_state = CMD_DATA;
+			break;
+		case CMD_DATA:
+			fintek->rem--;
+			break;
+		case PARSE_IRDATA:
+			fintek->rem--;
+			rawir.pulse = ((sample & BUF_PULSE_BIT) != 0);
+			rawir.duration = (sample & BUF_SAMPLE_MASK)
+					  * CIR_SAMPLE_PERIOD;
+
+			fit_dbg("Storing %s with duration %d",
+				rawir.pulse ? "pulse" : "space",
+				rawir.duration);
+			if (ir_raw_event_store_with_filter(fintek->rdev,
+									&rawir))
+				event = true;
+			break;
+		}
+
+		if ((fintek->parser_state != CMD_HEADER) && !fintek->rem)
+			fintek->parser_state = CMD_HEADER;
+	}
+
+	fintek->pkts = 0;
+
+	if (event) {
+		fit_dbg("Calling ir_raw_event_handle");
+		ir_raw_event_handle(fintek->rdev);
+	}
+}
+
+/* copy data from hardware rx register into driver buffer */
+static void fintek_get_rx_ir_data(struct fintek_dev *fintek, u8 rx_irqs)
+{
+	unsigned long flags;
+	u8 sample, status;
+
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+
+	/*
+	 * We must read data from CIR_RX_DATA until the hardware IR buffer
+	 * is empty and clears the RX_TIMEOUT and/or RX_RECEIVE flags in
+	 * the CIR_STATUS register
+	 */
+	do {
+		sample = fintek_cir_reg_read(fintek, CIR_RX_DATA);
+		fit_dbg("%s: sample: 0x%02x", __func__, sample);
+
+		fintek->buf[fintek->pkts] = sample;
+		fintek->pkts++;
+
+		status = fintek_cir_reg_read(fintek, CIR_STATUS);
+		if (!(status & CIR_STATUS_IRQ_EN))
+			break;
+	} while (status & rx_irqs);
+
+	fintek_process_rx_ir_data(fintek);
+
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+}
+
+static void fintek_cir_log_irqs(u8 status)
+{
+	fit_pr(KERN_INFO, "IRQ 0x%02x:%s%s%s%s%s", status,
+		status & CIR_STATUS_IRQ_EN	? " IRQEN"	: "",
+		status & CIR_STATUS_TX_FINISH	? " TXF"	: "",
+		status & CIR_STATUS_TX_UNDERRUN	? " TXU"	: "",
+		status & CIR_STATUS_RX_TIMEOUT	? " RXTO"	: "",
+		status & CIR_STATUS_RX_RECEIVE	? " RXOK"	: "");
+}
+
+/* interrupt service routine for incoming and outgoing CIR data */
+static irqreturn_t fintek_cir_isr(int irq, void *data)
+{
+	struct fintek_dev *fintek = data;
+	u8 status, rx_irqs;
+
+	fit_dbg_verbose("%s firing", __func__);
+
+	fintek_config_mode_enable(fintek);
+	fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
+	fintek_config_mode_disable(fintek);
+
+	/*
+	 * Get IR Status register contents. Write 1 to ack/clear
+	 *
+	 * bit: reg name    - description
+	 *   3: TX_FINISH   - TX is finished
+	 *   2: TX_UNDERRUN - TX underrun
+	 *   1: RX_TIMEOUT  - RX data timeout
+	 *   0: RX_RECEIVE  - RX data received
+	 */
+	status = fintek_cir_reg_read(fintek, CIR_STATUS);
+	if (!(status & CIR_STATUS_IRQ_MASK) || status == 0xff) {
+		fit_dbg_verbose("%s exiting, IRSTS 0x%02x", __func__, status);
+		fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
+		return IRQ_RETVAL(IRQ_NONE);
+	}
+
+	if (debug)
+		fintek_cir_log_irqs(status);
+
+	rx_irqs = status & (CIR_STATUS_RX_RECEIVE | CIR_STATUS_RX_TIMEOUT);
+	if (rx_irqs)
+		fintek_get_rx_ir_data(fintek, rx_irqs);
+
+	/* ack/clear all irq flags we've got */
+	fintek_cir_reg_write(fintek, status, CIR_STATUS);
+
+	fit_dbg_verbose("%s done", __func__);
+	return IRQ_RETVAL(IRQ_HANDLED);
+}
+
+static void fintek_enable_cir(struct fintek_dev *fintek)
+{
+	/* set IRQ enabled */
+	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_EN, CIR_STATUS);
+
+	fintek_config_mode_enable(fintek);
+
+	/* enable the CIR logical device */
+	fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
+	fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
+
+	fintek_config_mode_disable(fintek);
+
+	/* clear all pending interrupts */
+	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
+
+	/* enable interrupts */
+	fintek_enable_cir_irq(fintek);
+}
+
+static void fintek_disable_cir(struct fintek_dev *fintek)
+{
+	fintek_config_mode_enable(fintek);
+
+	/* disable the CIR logical device */
+	fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
+	fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN);
+
+	fintek_config_mode_disable(fintek);
+}
+
+static int fintek_open(struct rc_dev *dev)
+{
+	struct fintek_dev *fintek = dev->priv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+	fintek_enable_cir(fintek);
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+
+	return 0;
+}
+
+static void fintek_close(struct rc_dev *dev)
+{
+	struct fintek_dev *fintek = dev->priv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+	fintek_disable_cir(fintek);
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+}
+
+/* Allocate memory, probe hardware, and initialize everything */
+static int fintek_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
+{
+	struct fintek_dev *fintek;
+	struct rc_dev *rdev;
+	int ret = -ENOMEM;
+
+	fintek = kzalloc(sizeof(struct fintek_dev), GFP_KERNEL);
+	if (!fintek)
+		return ret;
+
+	/* input device for IR remote (and tx) */
+	rdev = rc_allocate_device(RC_DRIVER_IR_RAW);
+	if (!rdev)
+		goto exit_free_dev_rdev;
+
+	ret = -ENODEV;
+	/* validate pnp resources */
+	if (!pnp_port_valid(pdev, 0)) {
+		dev_err(&pdev->dev, "IR PNP Port not valid!\n");
+		goto exit_free_dev_rdev;
+	}
+
+	if (!pnp_irq_valid(pdev, 0)) {
+		dev_err(&pdev->dev, "IR PNP IRQ not valid!\n");
+		goto exit_free_dev_rdev;
+	}
+
+	fintek->cir_addr = pnp_port_start(pdev, 0);
+	fintek->cir_irq  = pnp_irq(pdev, 0);
+	fintek->cir_port_len = pnp_port_len(pdev, 0);
+
+	fintek->cr_ip = CR_INDEX_PORT;
+	fintek->cr_dp = CR_DATA_PORT;
+
+	spin_lock_init(&fintek->fintek_lock);
+
+	pnp_set_drvdata(pdev, fintek);
+	fintek->pdev = pdev;
+
+	ret = fintek_hw_detect(fintek);
+	if (ret)
+		goto exit_free_dev_rdev;
+
+	/* Initialize CIR & CIR Wake Logical Devices */
+	fintek_config_mode_enable(fintek);
+	fintek_cir_ldev_init(fintek);
+	fintek_config_mode_disable(fintek);
+
+	/* Initialize CIR & CIR Wake Config Registers */
+	fintek_cir_regs_init(fintek);
+
+	/* Set up the rc device */
+	rdev->priv = fintek;
+	rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
+	rdev->open = fintek_open;
+	rdev->close = fintek_close;
+	rdev->device_name = FINTEK_DESCRIPTION;
+	rdev->input_phys = "fintek/cir0";
+	rdev->input_id.bustype = BUS_HOST;
+	rdev->input_id.vendor = VENDOR_ID_FINTEK;
+	rdev->input_id.product = fintek->chip_major;
+	rdev->input_id.version = fintek->chip_minor;
+	rdev->dev.parent = &pdev->dev;
+	rdev->driver_name = FINTEK_DRIVER_NAME;
+	rdev->map_name = RC_MAP_RC6_MCE;
+	rdev->timeout = 1000;
+	/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
+	rdev->rx_resolution = CIR_SAMPLE_PERIOD;
+
+	fintek->rdev = rdev;
+
+	ret = -EBUSY;
+	/* now claim resources */
+	if (!request_region(fintek->cir_addr,
+			    fintek->cir_port_len, FINTEK_DRIVER_NAME))
+		goto exit_free_dev_rdev;
+
+	if (request_irq(fintek->cir_irq, fintek_cir_isr, IRQF_SHARED,
+			FINTEK_DRIVER_NAME, (void *)fintek))
+		goto exit_free_cir_addr;
+
+	ret = rc_register_device(rdev);
+	if (ret)
+		goto exit_free_irq;
+
+	device_init_wakeup(&pdev->dev, true);
+
+	fit_pr(KERN_NOTICE, "driver has been successfully loaded\n");
+	if (debug)
+		cir_dump_regs(fintek);
+
+	return 0;
+
+exit_free_irq:
+	free_irq(fintek->cir_irq, fintek);
+exit_free_cir_addr:
+	release_region(fintek->cir_addr, fintek->cir_port_len);
+exit_free_dev_rdev:
+	rc_free_device(rdev);
+	kfree(fintek);
+
+	return ret;
+}
+
+static void fintek_remove(struct pnp_dev *pdev)
+{
+	struct fintek_dev *fintek = pnp_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+	/* disable CIR */
+	fintek_disable_cir(fintek);
+	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
+	/* enable CIR Wake (for IR power-on) */
+	fintek_enable_wake(fintek);
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+
+	/* free resources */
+	free_irq(fintek->cir_irq, fintek);
+	release_region(fintek->cir_addr, fintek->cir_port_len);
+
+	rc_unregister_device(fintek->rdev);
+
+	kfree(fintek);
+}
+
+static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state)
+{
+	struct fintek_dev *fintek = pnp_get_drvdata(pdev);
+	unsigned long flags;
+
+	fit_dbg("%s called", __func__);
+
+	spin_lock_irqsave(&fintek->fintek_lock, flags);
+
+	/* disable all CIR interrupts */
+	fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
+
+	spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+
+	fintek_config_mode_enable(fintek);
+
+	/* disable cir logical dev */
+	fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
+	fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN);
+
+	fintek_config_mode_disable(fintek);
+
+	/* make sure wake is enabled */
+	fintek_enable_wake(fintek);
+
+	return 0;
+}
+
+static int fintek_resume(struct pnp_dev *pdev)
+{
+	struct fintek_dev *fintek = pnp_get_drvdata(pdev);
+
+	fit_dbg("%s called", __func__);
+
+	/* open interrupt */
+	fintek_enable_cir_irq(fintek);
+
+	/* Enable CIR logical device */
+	fintek_config_mode_enable(fintek);
+	fintek_select_logical_dev(fintek, fintek->logical_dev_cir);
+	fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN);
+
+	fintek_config_mode_disable(fintek);
+
+	fintek_cir_regs_init(fintek);
+
+	return 0;
+}
+
+static void fintek_shutdown(struct pnp_dev *pdev)
+{
+	struct fintek_dev *fintek = pnp_get_drvdata(pdev);
+	fintek_enable_wake(fintek);
+}
+
+static const struct pnp_device_id fintek_ids[] = {
+	{ "FIT0002", 0 },   /* CIR */
+	{ "", 0 },
+};
+
+static struct pnp_driver fintek_driver = {
+	.name		= FINTEK_DRIVER_NAME,
+	.id_table	= fintek_ids,
+	.flags		= PNP_DRIVER_RES_DO_NOT_CHANGE,
+	.probe		= fintek_probe,
+	.remove		= fintek_remove,
+	.suspend	= fintek_suspend,
+	.resume		= fintek_resume,
+	.shutdown	= fintek_shutdown,
+};
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging output");
+
+MODULE_DEVICE_TABLE(pnp, fintek_ids);
+MODULE_DESCRIPTION(FINTEK_DESCRIPTION " driver");
+
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+MODULE_LICENSE("GPL");
+
+module_pnp_driver(fintek_driver);