summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/devices/lart.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/mtd/devices/lart.c
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/mtd/devices/lart.c')
-rw-r--r--drivers/mtd/devices/lart.c682
1 files changed, 682 insertions, 0 deletions
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
new file mode 100644
index 000000000..aecd441e4
--- /dev/null
+++ b/drivers/mtd/devices/lart.c
@@ -0,0 +1,682 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * MTD driver for the 28F160F3 Flash Memory (non-CFI) on LART.
+ *
+ * Author: Abraham vd Merwe <abraham@2d3d.co.za>
+ *
+ * Copyright (c) 2001, 2d3D, Inc.
+ *
+ * References:
+ *
+ * [1] 3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ * - Order Number: 290644-005
+ * - January 2000
+ *
+ * [2] MTD internal API documentation
+ * - http://www.linux-mtd.infradead.org/
+ *
+ * Limitations:
+ *
+ * Even though this driver is written for 3 Volt Fast Boot
+ * Block Flash Memory, it is rather specific to LART. With
+ * Minor modifications, notably the without data/address line
+ * mangling and different bus settings, etc. it should be
+ * trivial to adapt to other platforms.
+ *
+ * If somebody would sponsor me a different board, I'll
+ * adapt the driver (:
+ */
+
+/* debugging */
+//#define LART_DEBUG
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#ifndef CONFIG_SA1100_LART
+#error This is for LART architecture only
+#endif
+
+static char module_name[] = "lart";
+
+/*
+ * These values is specific to 28Fxxxx3 flash memory.
+ * See section 2.3.1 in "3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ */
+#define FLASH_BLOCKSIZE_PARAM (4096 * BUSWIDTH)
+#define FLASH_NUMBLOCKS_16m_PARAM 8
+#define FLASH_NUMBLOCKS_8m_PARAM 8
+
+/*
+ * These values is specific to 28Fxxxx3 flash memory.
+ * See section 2.3.2 in "3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ */
+#define FLASH_BLOCKSIZE_MAIN (32768 * BUSWIDTH)
+#define FLASH_NUMBLOCKS_16m_MAIN 31
+#define FLASH_NUMBLOCKS_8m_MAIN 15
+
+/*
+ * These values are specific to LART
+ */
+
+/* general */
+#define BUSWIDTH 4 /* don't change this - a lot of the code _will_ break if you change this */
+#define FLASH_OFFSET 0xe8000000 /* see linux/arch/arm/mach-sa1100/lart.c */
+
+/* blob */
+#define NUM_BLOB_BLOCKS FLASH_NUMBLOCKS_16m_PARAM
+#define PART_BLOB_START 0x00000000
+#define PART_BLOB_LEN (NUM_BLOB_BLOCKS * FLASH_BLOCKSIZE_PARAM)
+
+/* kernel */
+#define NUM_KERNEL_BLOCKS 7
+#define PART_KERNEL_START (PART_BLOB_START + PART_BLOB_LEN)
+#define PART_KERNEL_LEN (NUM_KERNEL_BLOCKS * FLASH_BLOCKSIZE_MAIN)
+
+/* initial ramdisk */
+#define NUM_INITRD_BLOCKS 24
+#define PART_INITRD_START (PART_KERNEL_START + PART_KERNEL_LEN)
+#define PART_INITRD_LEN (NUM_INITRD_BLOCKS * FLASH_BLOCKSIZE_MAIN)
+
+/*
+ * See section 4.0 in "3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ */
+#define READ_ARRAY 0x00FF00FF /* Read Array/Reset */
+#define READ_ID_CODES 0x00900090 /* Read Identifier Codes */
+#define ERASE_SETUP 0x00200020 /* Block Erase */
+#define ERASE_CONFIRM 0x00D000D0 /* Block Erase and Program Resume */
+#define PGM_SETUP 0x00400040 /* Program */
+#define STATUS_READ 0x00700070 /* Read Status Register */
+#define STATUS_CLEAR 0x00500050 /* Clear Status Register */
+#define STATUS_BUSY 0x00800080 /* Write State Machine Status (WSMS) */
+#define STATUS_ERASE_ERR 0x00200020 /* Erase Status (ES) */
+#define STATUS_PGM_ERR 0x00100010 /* Program Status (PS) */
+
+/*
+ * See section 4.2 in "3 Volt Fast Boot Block Flash Memory" Intel Datasheet
+ */
+#define FLASH_MANUFACTURER 0x00890089
+#define FLASH_DEVICE_8mbit_TOP 0x88f188f1
+#define FLASH_DEVICE_8mbit_BOTTOM 0x88f288f2
+#define FLASH_DEVICE_16mbit_TOP 0x88f388f3
+#define FLASH_DEVICE_16mbit_BOTTOM 0x88f488f4
+
+/***************************************************************************************************/
+
+/*
+ * The data line mapping on LART is as follows:
+ *
+ * U2 CPU | U3 CPU
+ * -------------------
+ * 0 20 | 0 12
+ * 1 22 | 1 14
+ * 2 19 | 2 11
+ * 3 17 | 3 9
+ * 4 24 | 4 0
+ * 5 26 | 5 2
+ * 6 31 | 6 7
+ * 7 29 | 7 5
+ * 8 21 | 8 13
+ * 9 23 | 9 15
+ * 10 18 | 10 10
+ * 11 16 | 11 8
+ * 12 25 | 12 1
+ * 13 27 | 13 3
+ * 14 30 | 14 6
+ * 15 28 | 15 4
+ */
+
+/* Mangle data (x) */
+#define DATA_TO_FLASH(x) \
+ ( \
+ (((x) & 0x08009000) >> 11) + \
+ (((x) & 0x00002000) >> 10) + \
+ (((x) & 0x04004000) >> 8) + \
+ (((x) & 0x00000010) >> 4) + \
+ (((x) & 0x91000820) >> 3) + \
+ (((x) & 0x22080080) >> 2) + \
+ ((x) & 0x40000400) + \
+ (((x) & 0x00040040) << 1) + \
+ (((x) & 0x00110000) << 4) + \
+ (((x) & 0x00220100) << 5) + \
+ (((x) & 0x00800208) << 6) + \
+ (((x) & 0x00400004) << 9) + \
+ (((x) & 0x00000001) << 12) + \
+ (((x) & 0x00000002) << 13) \
+ )
+
+/* Unmangle data (x) */
+#define FLASH_TO_DATA(x) \
+ ( \
+ (((x) & 0x00010012) << 11) + \
+ (((x) & 0x00000008) << 10) + \
+ (((x) & 0x00040040) << 8) + \
+ (((x) & 0x00000001) << 4) + \
+ (((x) & 0x12200104) << 3) + \
+ (((x) & 0x08820020) << 2) + \
+ ((x) & 0x40000400) + \
+ (((x) & 0x00080080) >> 1) + \
+ (((x) & 0x01100000) >> 4) + \
+ (((x) & 0x04402000) >> 5) + \
+ (((x) & 0x20008200) >> 6) + \
+ (((x) & 0x80000800) >> 9) + \
+ (((x) & 0x00001000) >> 12) + \
+ (((x) & 0x00004000) >> 13) \
+ )
+
+/*
+ * The address line mapping on LART is as follows:
+ *
+ * U3 CPU | U2 CPU
+ * -------------------
+ * 0 2 | 0 2
+ * 1 3 | 1 3
+ * 2 9 | 2 9
+ * 3 13 | 3 8
+ * 4 8 | 4 7
+ * 5 12 | 5 6
+ * 6 11 | 6 5
+ * 7 10 | 7 4
+ * 8 4 | 8 10
+ * 9 5 | 9 11
+ * 10 6 | 10 12
+ * 11 7 | 11 13
+ *
+ * BOOT BLOCK BOUNDARY
+ *
+ * 12 15 | 12 15
+ * 13 14 | 13 14
+ * 14 16 | 14 16
+ *
+ * MAIN BLOCK BOUNDARY
+ *
+ * 15 17 | 15 18
+ * 16 18 | 16 17
+ * 17 20 | 17 20
+ * 18 19 | 18 19
+ * 19 21 | 19 21
+ *
+ * As we can see from above, the addresses aren't mangled across
+ * block boundaries, so we don't need to worry about address
+ * translations except for sending/reading commands during
+ * initialization
+ */
+
+/* Mangle address (x) on chip U2 */
+#define ADDR_TO_FLASH_U2(x) \
+ ( \
+ (((x) & 0x00000f00) >> 4) + \
+ (((x) & 0x00042000) << 1) + \
+ (((x) & 0x0009c003) << 2) + \
+ (((x) & 0x00021080) << 3) + \
+ (((x) & 0x00000010) << 4) + \
+ (((x) & 0x00000040) << 5) + \
+ (((x) & 0x00000024) << 7) + \
+ (((x) & 0x00000008) << 10) \
+ )
+
+/* Unmangle address (x) on chip U2 */
+#define FLASH_U2_TO_ADDR(x) \
+ ( \
+ (((x) << 4) & 0x00000f00) + \
+ (((x) >> 1) & 0x00042000) + \
+ (((x) >> 2) & 0x0009c003) + \
+ (((x) >> 3) & 0x00021080) + \
+ (((x) >> 4) & 0x00000010) + \
+ (((x) >> 5) & 0x00000040) + \
+ (((x) >> 7) & 0x00000024) + \
+ (((x) >> 10) & 0x00000008) \
+ )
+
+/* Mangle address (x) on chip U3 */
+#define ADDR_TO_FLASH_U3(x) \
+ ( \
+ (((x) & 0x00000080) >> 3) + \
+ (((x) & 0x00000040) >> 1) + \
+ (((x) & 0x00052020) << 1) + \
+ (((x) & 0x00084f03) << 2) + \
+ (((x) & 0x00029010) << 3) + \
+ (((x) & 0x00000008) << 5) + \
+ (((x) & 0x00000004) << 7) \
+ )
+
+/* Unmangle address (x) on chip U3 */
+#define FLASH_U3_TO_ADDR(x) \
+ ( \
+ (((x) << 3) & 0x00000080) + \
+ (((x) << 1) & 0x00000040) + \
+ (((x) >> 1) & 0x00052020) + \
+ (((x) >> 2) & 0x00084f03) + \
+ (((x) >> 3) & 0x00029010) + \
+ (((x) >> 5) & 0x00000008) + \
+ (((x) >> 7) & 0x00000004) \
+ )
+
+/***************************************************************************************************/
+
+static __u8 read8 (__u32 offset)
+{
+ volatile __u8 *data = (__u8 *) (FLASH_OFFSET + offset);
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(): 0x%.8x -> 0x%.2x\n", __func__, offset, *data);
+#endif
+ return (*data);
+}
+
+static __u32 read32 (__u32 offset)
+{
+ volatile __u32 *data = (__u32 *) (FLASH_OFFSET + offset);
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(): 0x%.8x -> 0x%.8x\n", __func__, offset, *data);
+#endif
+ return (*data);
+}
+
+static void write32 (__u32 x,__u32 offset)
+{
+ volatile __u32 *data = (__u32 *) (FLASH_OFFSET + offset);
+ *data = x;
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(): 0x%.8x <- 0x%.8x\n", __func__, offset, *data);
+#endif
+}
+
+/***************************************************************************************************/
+
+/*
+ * Probe for 16mbit flash memory on a LART board without doing
+ * too much damage. Since we need to write 1 dword to memory,
+ * we're f**cked if this happens to be DRAM since we can't
+ * restore the memory (otherwise we might exit Read Array mode).
+ *
+ * Returns 1 if we found 16mbit flash memory on LART, 0 otherwise.
+ */
+static int flash_probe (void)
+{
+ __u32 manufacturer,devtype;
+
+ /* setup "Read Identifier Codes" mode */
+ write32 (DATA_TO_FLASH (READ_ID_CODES),0x00000000);
+
+ /* probe U2. U2/U3 returns the same data since the first 3
+ * address lines is mangled in the same way */
+ manufacturer = FLASH_TO_DATA (read32 (ADDR_TO_FLASH_U2 (0x00000000)));
+ devtype = FLASH_TO_DATA (read32 (ADDR_TO_FLASH_U2 (0x00000001)));
+
+ /* put the flash back into command mode */
+ write32 (DATA_TO_FLASH (READ_ARRAY),0x00000000);
+
+ return (manufacturer == FLASH_MANUFACTURER && (devtype == FLASH_DEVICE_16mbit_TOP || devtype == FLASH_DEVICE_16mbit_BOTTOM));
+}
+
+/*
+ * Erase one block of flash memory at offset ``offset'' which is any
+ * address within the block which should be erased.
+ *
+ * Returns 1 if successful, 0 otherwise.
+ */
+static inline int erase_block (__u32 offset)
+{
+ __u32 status;
+
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(): 0x%.8x\n", __func__, offset);
+#endif
+
+ /* erase and confirm */
+ write32 (DATA_TO_FLASH (ERASE_SETUP),offset);
+ write32 (DATA_TO_FLASH (ERASE_CONFIRM),offset);
+
+ /* wait for block erase to finish */
+ do
+ {
+ write32 (DATA_TO_FLASH (STATUS_READ),offset);
+ status = FLASH_TO_DATA (read32 (offset));
+ }
+ while ((~status & STATUS_BUSY) != 0);
+
+ /* put the flash back into command mode */
+ write32 (DATA_TO_FLASH (READ_ARRAY),offset);
+
+ /* was the erase successful? */
+ if ((status & STATUS_ERASE_ERR))
+ {
+ printk (KERN_WARNING "%s: erase error at address 0x%.8x.\n",module_name,offset);
+ return (0);
+ }
+
+ return (1);
+}
+
+static int flash_erase (struct mtd_info *mtd,struct erase_info *instr)
+{
+ __u32 addr,len;
+ int i,first;
+
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(addr = 0x%.8x, len = %d)\n", __func__, instr->addr, instr->len);
+#endif
+
+ /*
+ * check that both start and end of the requested erase are
+ * aligned with the erasesize at the appropriate addresses.
+ *
+ * skip all erase regions which are ended before the start of
+ * the requested erase. Actually, to save on the calculations,
+ * we skip to the first erase region which starts after the
+ * start of the requested erase, and then go back one.
+ */
+ for (i = 0; i < mtd->numeraseregions && instr->addr >= mtd->eraseregions[i].offset; i++) ;
+ i--;
+
+ /*
+ * ok, now i is pointing at the erase region in which this
+ * erase request starts. Check the start of the requested
+ * erase range is aligned with the erase size which is in
+ * effect here.
+ */
+ if (i < 0 || (instr->addr & (mtd->eraseregions[i].erasesize - 1)))
+ return -EINVAL;
+
+ /* Remember the erase region we start on */
+ first = i;
+
+ /*
+ * next, check that the end of the requested erase is aligned
+ * with the erase region at that address.
+ *
+ * as before, drop back one to point at the region in which
+ * the address actually falls
+ */
+ for (; i < mtd->numeraseregions && instr->addr + instr->len >= mtd->eraseregions[i].offset; i++) ;
+ i--;
+
+ /* is the end aligned on a block boundary? */
+ if (i < 0 || ((instr->addr + instr->len) & (mtd->eraseregions[i].erasesize - 1)))
+ return -EINVAL;
+
+ addr = instr->addr;
+ len = instr->len;
+
+ i = first;
+
+ /* now erase those blocks */
+ while (len)
+ {
+ if (!erase_block (addr))
+ return (-EIO);
+
+ addr += mtd->eraseregions[i].erasesize;
+ len -= mtd->eraseregions[i].erasesize;
+
+ if (addr == mtd->eraseregions[i].offset + (mtd->eraseregions[i].erasesize * mtd->eraseregions[i].numblocks)) i++;
+ }
+
+ return (0);
+}
+
+static int flash_read (struct mtd_info *mtd,loff_t from,size_t len,size_t *retlen,u_char *buf)
+{
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(from = 0x%.8x, len = %d)\n", __func__, (__u32)from, len);
+#endif
+
+ /* we always read len bytes */
+ *retlen = len;
+
+ /* first, we read bytes until we reach a dword boundary */
+ if (from & (BUSWIDTH - 1))
+ {
+ int gap = BUSWIDTH - (from & (BUSWIDTH - 1));
+
+ while (len && gap--) {
+ *buf++ = read8 (from++);
+ len--;
+ }
+ }
+
+ /* now we read dwords until we reach a non-dword boundary */
+ while (len >= BUSWIDTH)
+ {
+ *((__u32 *) buf) = read32 (from);
+
+ buf += BUSWIDTH;
+ from += BUSWIDTH;
+ len -= BUSWIDTH;
+ }
+
+ /* top up the last unaligned bytes */
+ if (len & (BUSWIDTH - 1))
+ while (len--) *buf++ = read8 (from++);
+
+ return (0);
+}
+
+/*
+ * Write one dword ``x'' to flash memory at offset ``offset''. ``offset''
+ * must be 32 bits, i.e. it must be on a dword boundary.
+ *
+ * Returns 1 if successful, 0 otherwise.
+ */
+static inline int write_dword (__u32 offset,__u32 x)
+{
+ __u32 status;
+
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(): 0x%.8x <- 0x%.8x\n", __func__, offset, x);
+#endif
+
+ /* setup writing */
+ write32 (DATA_TO_FLASH (PGM_SETUP),offset);
+
+ /* write the data */
+ write32 (x,offset);
+
+ /* wait for the write to finish */
+ do
+ {
+ write32 (DATA_TO_FLASH (STATUS_READ),offset);
+ status = FLASH_TO_DATA (read32 (offset));
+ }
+ while ((~status & STATUS_BUSY) != 0);
+
+ /* put the flash back into command mode */
+ write32 (DATA_TO_FLASH (READ_ARRAY),offset);
+
+ /* was the write successful? */
+ if ((status & STATUS_PGM_ERR) || read32 (offset) != x)
+ {
+ printk (KERN_WARNING "%s: write error at address 0x%.8x.\n",module_name,offset);
+ return (0);
+ }
+
+ return (1);
+}
+
+static int flash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf)
+{
+ __u8 tmp[4];
+ int i,n;
+
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG "%s(to = 0x%.8x, len = %d)\n", __func__, (__u32)to, len);
+#endif
+
+ /* sanity checks */
+ if (!len) return (0);
+
+ /* first, we write a 0xFF.... padded byte until we reach a dword boundary */
+ if (to & (BUSWIDTH - 1))
+ {
+ __u32 aligned = to & ~(BUSWIDTH - 1);
+ int gap = to - aligned;
+
+ i = n = 0;
+
+ while (gap--) tmp[i++] = 0xFF;
+ while (len && i < BUSWIDTH) {
+ tmp[i++] = buf[n++];
+ len--;
+ }
+ while (i < BUSWIDTH) tmp[i++] = 0xFF;
+
+ if (!write_dword (aligned,*((__u32 *) tmp))) return (-EIO);
+
+ to += n;
+ buf += n;
+ *retlen += n;
+ }
+
+ /* now we write dwords until we reach a non-dword boundary */
+ while (len >= BUSWIDTH)
+ {
+ if (!write_dword (to,*((__u32 *) buf))) return (-EIO);
+
+ to += BUSWIDTH;
+ buf += BUSWIDTH;
+ *retlen += BUSWIDTH;
+ len -= BUSWIDTH;
+ }
+
+ /* top up the last unaligned bytes, padded with 0xFF.... */
+ if (len & (BUSWIDTH - 1))
+ {
+ i = n = 0;
+
+ while (len--) tmp[i++] = buf[n++];
+ while (i < BUSWIDTH) tmp[i++] = 0xFF;
+
+ if (!write_dword (to,*((__u32 *) tmp))) return (-EIO);
+
+ *retlen += n;
+ }
+
+ return (0);
+}
+
+/***************************************************************************************************/
+
+static struct mtd_info mtd;
+
+static struct mtd_erase_region_info erase_regions[] = {
+ /* parameter blocks */
+ {
+ .offset = 0x00000000,
+ .erasesize = FLASH_BLOCKSIZE_PARAM,
+ .numblocks = FLASH_NUMBLOCKS_16m_PARAM,
+ },
+ /* main blocks */
+ {
+ .offset = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM,
+ .erasesize = FLASH_BLOCKSIZE_MAIN,
+ .numblocks = FLASH_NUMBLOCKS_16m_MAIN,
+ }
+};
+
+static const struct mtd_partition lart_partitions[] = {
+ /* blob */
+ {
+ .name = "blob",
+ .offset = PART_BLOB_START,
+ .size = PART_BLOB_LEN,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = PART_KERNEL_START, /* MTDPART_OFS_APPEND */
+ .size = PART_KERNEL_LEN,
+ },
+ /* initial ramdisk / file system */
+ {
+ .name = "file system",
+ .offset = PART_INITRD_START, /* MTDPART_OFS_APPEND */
+ .size = PART_INITRD_LEN, /* MTDPART_SIZ_FULL */
+ }
+};
+#define NUM_PARTITIONS ARRAY_SIZE(lart_partitions)
+
+static int __init lart_flash_init (void)
+{
+ int result;
+ memset (&mtd,0,sizeof (mtd));
+ printk ("MTD driver for LART. Written by Abraham vd Merwe <abraham@2d3d.co.za>\n");
+ printk ("%s: Probing for 28F160x3 flash on LART...\n",module_name);
+ if (!flash_probe ())
+ {
+ printk (KERN_WARNING "%s: Found no LART compatible flash device\n",module_name);
+ return (-ENXIO);
+ }
+ printk ("%s: This looks like a LART board to me.\n",module_name);
+ mtd.name = module_name;
+ mtd.type = MTD_NORFLASH;
+ mtd.writesize = 1;
+ mtd.writebufsize = 4;
+ mtd.flags = MTD_CAP_NORFLASH;
+ mtd.size = FLASH_BLOCKSIZE_PARAM * FLASH_NUMBLOCKS_16m_PARAM + FLASH_BLOCKSIZE_MAIN * FLASH_NUMBLOCKS_16m_MAIN;
+ mtd.erasesize = FLASH_BLOCKSIZE_MAIN;
+ mtd.numeraseregions = ARRAY_SIZE(erase_regions);
+ mtd.eraseregions = erase_regions;
+ mtd._erase = flash_erase;
+ mtd._read = flash_read;
+ mtd._write = flash_write;
+ mtd.owner = THIS_MODULE;
+
+#ifdef LART_DEBUG
+ printk (KERN_DEBUG
+ "mtd.name = %s\n"
+ "mtd.size = 0x%.8x (%uM)\n"
+ "mtd.erasesize = 0x%.8x (%uK)\n"
+ "mtd.numeraseregions = %d\n",
+ mtd.name,
+ mtd.size,mtd.size / (1024*1024),
+ mtd.erasesize,mtd.erasesize / 1024,
+ mtd.numeraseregions);
+
+ if (mtd.numeraseregions)
+ for (result = 0; result < mtd.numeraseregions; result++)
+ printk (KERN_DEBUG
+ "\n\n"
+ "mtd.eraseregions[%d].offset = 0x%.8x\n"
+ "mtd.eraseregions[%d].erasesize = 0x%.8x (%uK)\n"
+ "mtd.eraseregions[%d].numblocks = %d\n",
+ result,mtd.eraseregions[result].offset,
+ result,mtd.eraseregions[result].erasesize,mtd.eraseregions[result].erasesize / 1024,
+ result,mtd.eraseregions[result].numblocks);
+
+ printk ("\npartitions = %d\n", ARRAY_SIZE(lart_partitions));
+
+ for (result = 0; result < ARRAY_SIZE(lart_partitions); result++)
+ printk (KERN_DEBUG
+ "\n\n"
+ "lart_partitions[%d].name = %s\n"
+ "lart_partitions[%d].offset = 0x%.8x\n"
+ "lart_partitions[%d].size = 0x%.8x (%uK)\n",
+ result,lart_partitions[result].name,
+ result,lart_partitions[result].offset,
+ result,lart_partitions[result].size,lart_partitions[result].size / 1024);
+#endif
+
+ result = mtd_device_register(&mtd, lart_partitions,
+ ARRAY_SIZE(lart_partitions));
+
+ return (result);
+}
+
+static void __exit lart_flash_exit (void)
+{
+ mtd_device_unregister(&mtd);
+}
+
+module_init (lart_flash_init);
+module_exit (lart_flash_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Abraham vd Merwe <abraham@2d3d.co.za>");
+MODULE_DESCRIPTION("MTD driver for Intel 28F160F3 on LART board");