Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 224 insertions, 0 deletions

diff --git a/drivers/mtd/maps/sbc_gxx.c b/drivers/mtd/maps/sbc_gxx.c
new file mode 100644
index 000000000..9d48a261c
--- /dev/null
+++ b/drivers/mtd/maps/sbc_gxx.c
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* sbc_gxx.c -- MTD map driver for Arcom Control Systems SBC-MediaGX,
+                SBC-GXm and SBC-GX1 series boards.
+
+   Copyright (C) 2001 Arcom Control System Ltd
+
+
+The SBC-MediaGX / SBC-GXx has up to 16 MiB of
+Intel StrataFlash (28F320/28F640) in x8 mode.
+
+This driver uses the CFI probe and Intel Extended Command Set drivers.
+
+The flash is accessed as follows:
+
+   16 KiB memory window at 0xdc000-0xdffff
+
+   Two IO address locations for paging
+
+   0x258
+       bit 0-7: address bit 14-21
+   0x259
+       bit 0-1: address bit 22-23
+       bit 7:   0 - reset/powered down
+                1 - device enabled
+
+The single flash device is divided into 3 partition which appear as
+separate MTD devices.
+
+25/04/2001 AJL (Arcom)  Modified signon strings and partition sizes
+                        (to support bzImages up to 638KiB-ish)
+*/
+
+// Includes
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+// Defines
+
+// - Hardware specific
+
+#define WINDOW_START 0xdc000
+
+/* Number of bits in offset. */
+#define WINDOW_SHIFT 14
+#define WINDOW_LENGTH (1 << WINDOW_SHIFT)
+
+/* The bits for the offset into the window. */
+#define WINDOW_MASK (WINDOW_LENGTH-1)
+#define PAGE_IO 0x258
+#define PAGE_IO_SIZE 2
+
+/* bit 7 of 0x259 must be 1 to enable device. */
+#define DEVICE_ENABLE 0x8000
+
+// - Flash / Partition sizing
+
+#define MAX_SIZE_KiB             16384
+#define BOOT_PARTITION_SIZE_KiB  768
+#define DATA_PARTITION_SIZE_KiB  1280
+#define APP_PARTITION_SIZE_KiB   6144
+
+// Globals
+
+static volatile int page_in_window = -1; // Current page in window.
+static void __iomem *iomapadr;
+static DEFINE_SPINLOCK(sbc_gxx_spin);
+
+/* partition_info gives details on the logical partitions that the split the
+ * single flash device into. If the size if zero we use up to the end of the
+ * device. */
+static const struct mtd_partition partition_info[] = {
+    { .name = "SBC-GXx flash boot partition",
+      .offset = 0,
+      .size =   BOOT_PARTITION_SIZE_KiB*1024 },
+    { .name = "SBC-GXx flash data partition",
+      .offset = BOOT_PARTITION_SIZE_KiB*1024,
+      .size = (DATA_PARTITION_SIZE_KiB)*1024 },
+    { .name = "SBC-GXx flash application partition",
+      .offset = (BOOT_PARTITION_SIZE_KiB+DATA_PARTITION_SIZE_KiB)*1024 }
+};
+
+#define NUM_PARTITIONS 3
+
+static inline void sbc_gxx_page(struct map_info *map, unsigned long ofs)
+{
+	unsigned long page = ofs >> WINDOW_SHIFT;
+
+	if( page!=page_in_window ) {
+		outw( page | DEVICE_ENABLE, PAGE_IO );
+		page_in_window = page;
+	}
+}
+
+
+static map_word sbc_gxx_read8(struct map_info *map, unsigned long ofs)
+{
+	map_word ret;
+	spin_lock(&sbc_gxx_spin);
+	sbc_gxx_page(map, ofs);
+	ret.x[0] = readb(iomapadr + (ofs & WINDOW_MASK));
+	spin_unlock(&sbc_gxx_spin);
+	return ret;
+}
+
+static void sbc_gxx_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	while(len) {
+		unsigned long thislen = len;
+		if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
+			thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
+
+		spin_lock(&sbc_gxx_spin);
+		sbc_gxx_page(map, from);
+		memcpy_fromio(to, iomapadr + (from & WINDOW_MASK), thislen);
+		spin_unlock(&sbc_gxx_spin);
+		to += thislen;
+		from += thislen;
+		len -= thislen;
+	}
+}
+
+static void sbc_gxx_write8(struct map_info *map, map_word d, unsigned long adr)
+{
+	spin_lock(&sbc_gxx_spin);
+	sbc_gxx_page(map, adr);
+	writeb(d.x[0], iomapadr + (adr & WINDOW_MASK));
+	spin_unlock(&sbc_gxx_spin);
+}
+
+static void sbc_gxx_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	while(len) {
+		unsigned long thislen = len;
+		if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
+			thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
+
+		spin_lock(&sbc_gxx_spin);
+		sbc_gxx_page(map, to);
+		memcpy_toio(iomapadr + (to & WINDOW_MASK), from, thislen);
+		spin_unlock(&sbc_gxx_spin);
+		to += thislen;
+		from += thislen;
+		len -= thislen;
+	}
+}
+
+static struct map_info sbc_gxx_map = {
+	.name = "SBC-GXx flash",
+	.phys = NO_XIP,
+	.size = MAX_SIZE_KiB*1024, /* this must be set to a maximum possible amount
+			 of flash so the cfi probe routines find all
+			 the chips */
+	.bankwidth = 1,
+	.read = sbc_gxx_read8,
+	.copy_from = sbc_gxx_copy_from,
+	.write = sbc_gxx_write8,
+	.copy_to = sbc_gxx_copy_to
+};
+
+/* MTD device for all of the flash. */
+static struct mtd_info *all_mtd;
+
+static void cleanup_sbc_gxx(void)
+{
+	if( all_mtd ) {
+		mtd_device_unregister(all_mtd);
+		map_destroy( all_mtd );
+	}
+
+	iounmap(iomapadr);
+	release_region(PAGE_IO,PAGE_IO_SIZE);
+}
+
+static int __init init_sbc_gxx(void)
+{
+  	iomapadr = ioremap(WINDOW_START, WINDOW_LENGTH);
+	if (!iomapadr) {
+		printk( KERN_ERR"%s: failed to ioremap memory region\n",
+			sbc_gxx_map.name );
+		return -EIO;
+	}
+
+	if (!request_region( PAGE_IO, PAGE_IO_SIZE, "SBC-GXx flash")) {
+		printk( KERN_ERR"%s: IO ports 0x%x-0x%x in use\n",
+			sbc_gxx_map.name,
+			PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1 );
+		iounmap(iomapadr);
+		return -EAGAIN;
+	}
+
+
+	printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n",
+		sbc_gxx_map.name,
+		PAGE_IO, PAGE_IO+PAGE_IO_SIZE-1,
+		WINDOW_START, WINDOW_START+WINDOW_LENGTH-1 );
+
+	/* Probe for chip. */
+	all_mtd = do_map_probe( "cfi_probe", &sbc_gxx_map );
+	if( !all_mtd ) {
+		cleanup_sbc_gxx();
+		return -ENXIO;
+	}
+
+	all_mtd->owner = THIS_MODULE;
+
+	/* Create MTD devices for each partition. */
+	mtd_device_register(all_mtd, partition_info, NUM_PARTITIONS);
+
+	return 0;
+}
+
+module_init(init_sbc_gxx);
+module_exit(cleanup_sbc_gxx);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arcom Control Systems Ltd.");
+MODULE_DESCRIPTION("MTD map driver for SBC-GXm and SBC-GX1 series boards");