Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 391 insertions, 0 deletions

diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
new file mode 100644
index 000000000..7e4f307a0
--- /dev/null
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Microchip LAN937X switch driver main logic
+ * Copyright (C) 2019-2022 Microchip Technology Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/iopoll.h>
+#include <linux/phy.h>
+#include <linux/of_net.h>
+#include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
+#include <linux/math.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "lan937x_reg.h"
+#include "ksz_common.h"
+#include "lan937x.h"
+
+static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
+{
+	return regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
+}
+
+static int lan937x_port_cfg(struct ksz_device *dev, int port, int offset,
+			    u8 bits, bool set)
+{
+	return regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
+				  bits, set ? bits : 0);
+}
+
+static int lan937x_enable_spi_indirect_access(struct ksz_device *dev)
+{
+	u16 data16;
+	int ret;
+
+	/* Enable Phy access through SPI */
+	ret = lan937x_cfg(dev, REG_GLOBAL_CTRL_0, SW_PHY_REG_BLOCK, false);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz_read16(dev, REG_VPHY_SPECIAL_CTRL__2, &data16);
+	if (ret < 0)
+		return ret;
+
+	/* Allow SPI access */
+	data16 |= VPHY_SPI_INDIRECT_ENABLE;
+
+	return ksz_write16(dev, REG_VPHY_SPECIAL_CTRL__2, data16);
+}
+
+static int lan937x_vphy_ind_addr_wr(struct ksz_device *dev, int addr, int reg)
+{
+	u16 addr_base = REG_PORT_T1_PHY_CTRL_BASE;
+	u16 temp;
+
+	/* get register address based on the logical port */
+	temp = PORT_CTRL_ADDR(addr, (addr_base + (reg << 2)));
+
+	return ksz_write16(dev, REG_VPHY_IND_ADDR__2, temp);
+}
+
+static int lan937x_internal_phy_write(struct ksz_device *dev, int addr, int reg,
+				      u16 val)
+{
+	unsigned int value;
+	int ret;
+
+	/* Check for internal phy port */
+	if (!dev->info->internal_phy[addr])
+		return -EOPNOTSUPP;
+
+	ret = lan937x_vphy_ind_addr_wr(dev, addr, reg);
+	if (ret < 0)
+		return ret;
+
+	/* Write the data to be written to the VPHY reg */
+	ret = ksz_write16(dev, REG_VPHY_IND_DATA__2, val);
+	if (ret < 0)
+		return ret;
+
+	/* Write the Write En and Busy bit */
+	ret = ksz_write16(dev, REG_VPHY_IND_CTRL__2,
+			  (VPHY_IND_WRITE | VPHY_IND_BUSY));
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read_poll_timeout(dev->regmap[1], REG_VPHY_IND_CTRL__2,
+				       value, !(value & VPHY_IND_BUSY), 10,
+				       1000);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to write phy register\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int lan937x_internal_phy_read(struct ksz_device *dev, int addr, int reg,
+				     u16 *val)
+{
+	unsigned int value;
+	int ret;
+
+	/* Check for internal phy port, return 0xffff for non-existent phy */
+	if (!dev->info->internal_phy[addr])
+		return 0xffff;
+
+	ret = lan937x_vphy_ind_addr_wr(dev, addr, reg);
+	if (ret < 0)
+		return ret;
+
+	/* Write Read and Busy bit to start the transaction */
+	ret = ksz_write16(dev, REG_VPHY_IND_CTRL__2, VPHY_IND_BUSY);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read_poll_timeout(dev->regmap[1], REG_VPHY_IND_CTRL__2,
+				       value, !(value & VPHY_IND_BUSY), 10,
+				       1000);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to read phy register\n");
+		return ret;
+	}
+
+	/* Read the VPHY register which has the PHY data */
+	return ksz_read16(dev, REG_VPHY_IND_DATA__2, val);
+}
+
+int lan937x_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data)
+{
+	return lan937x_internal_phy_read(dev, addr, reg, data);
+}
+
+int lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val)
+{
+	return lan937x_internal_phy_write(dev, addr, reg, val);
+}
+
+int lan937x_reset_switch(struct ksz_device *dev)
+{
+	u32 data32;
+	int ret;
+
+	/* reset switch */
+	ret = lan937x_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
+	if (ret < 0)
+		return ret;
+
+	/* Enable Auto Aging */
+	ret = lan937x_cfg(dev, REG_SW_LUE_CTRL_1, SW_LINK_AUTO_AGING, true);
+	if (ret < 0)
+		return ret;
+
+	/* disable interrupts */
+	ret = ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz_write32(dev, REG_SW_INT_STATUS__4, POR_READY_INT);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0xFF);
+	if (ret < 0)
+		return ret;
+
+	return ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
+}
+
+void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+	const u32 *masks = dev->info->masks;
+	const u16 *regs = dev->info->regs;
+	struct dsa_switch *ds = dev->ds;
+	u8 member;
+
+	/* enable tag tail for host port */
+	if (cpu_port)
+		lan937x_port_cfg(dev, port, REG_PORT_CTRL_0,
+				 PORT_TAIL_TAG_ENABLE, true);
+
+	/* set back pressure for half duplex */
+	lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE,
+			 true);
+
+	/* enable 802.1p priority */
+	lan937x_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
+
+	if (!dev->info->internal_phy[port])
+		lan937x_port_cfg(dev, port, regs[P_XMII_CTRL_0],
+				 masks[P_MII_TX_FLOW_CTRL] |
+				 masks[P_MII_RX_FLOW_CTRL],
+				 true);
+
+	if (cpu_port)
+		member = dsa_user_ports(ds);
+	else
+		member = BIT(dsa_upstream_port(ds, port));
+
+	dev->dev_ops->cfg_port_member(dev, port, member);
+}
+
+void lan937x_config_cpu_port(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	struct dsa_port *dp;
+
+	dsa_switch_for_each_cpu_port(dp, ds) {
+		if (dev->info->cpu_ports & (1 << dp->index)) {
+			dev->cpu_port = dp->index;
+
+			/* enable cpu port */
+			lan937x_port_setup(dev, dp->index, true);
+		}
+	}
+
+	dsa_switch_for_each_user_port(dp, ds) {
+		ksz_port_stp_state_set(ds, dp->index, BR_STATE_DISABLED);
+	}
+}
+
+int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu)
+{
+	struct dsa_switch *ds = dev->ds;
+	int ret;
+
+	new_mtu += VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+	if (dsa_is_cpu_port(ds, port))
+		new_mtu += LAN937X_TAG_LEN;
+
+	if (new_mtu >= FR_MIN_SIZE)
+		ret = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0,
+				       PORT_JUMBO_PACKET, true);
+	else
+		ret = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0,
+				       PORT_JUMBO_PACKET, false);
+	if (ret < 0) {
+		dev_err(ds->dev, "failed to enable jumbo\n");
+		return ret;
+	}
+
+	/* Write the frame size in PORT_MAX_FR_SIZE register */
+	ksz_pwrite16(dev, port, PORT_MAX_FR_SIZE, new_mtu);
+
+	return 0;
+}
+
+int lan937x_set_ageing_time(struct ksz_device *dev, unsigned int msecs)
+{
+	u32 secs = msecs / 1000;
+	u32 value;
+	int ret;
+
+	value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs);
+
+	ret = ksz_write8(dev, REG_SW_AGE_PERIOD__1, value);
+	if (ret < 0)
+		return ret;
+
+	value = FIELD_GET(SW_AGE_PERIOD_19_8_M, secs);
+
+	return ksz_write16(dev, REG_SW_AGE_PERIOD__2, value);
+}
+
+static void lan937x_set_tune_adj(struct ksz_device *dev, int port,
+				 u16 reg, u8 val)
+{
+	u16 data16;
+
+	ksz_pread16(dev, port, reg, &data16);
+
+	/* Update tune Adjust */
+	data16 |= FIELD_PREP(PORT_TUNE_ADJ, val);
+	ksz_pwrite16(dev, port, reg, data16);
+
+	/* write DLL reset to take effect */
+	data16 |= PORT_DLL_RESET;
+	ksz_pwrite16(dev, port, reg, data16);
+}
+
+static void lan937x_set_rgmii_tx_delay(struct ksz_device *dev, int port)
+{
+	u8 val;
+
+	/* Apply different codes based on the ports as per characterization
+	 * results
+	 */
+	val = (port == LAN937X_RGMII_1_PORT) ? RGMII_1_TX_DELAY_2NS :
+		RGMII_2_TX_DELAY_2NS;
+
+	lan937x_set_tune_adj(dev, port, REG_PORT_XMII_CTRL_5, val);
+}
+
+static void lan937x_set_rgmii_rx_delay(struct ksz_device *dev, int port)
+{
+	u8 val;
+
+	val = (port == LAN937X_RGMII_1_PORT) ? RGMII_1_RX_DELAY_2NS :
+		RGMII_2_RX_DELAY_2NS;
+
+	lan937x_set_tune_adj(dev, port, REG_PORT_XMII_CTRL_4, val);
+}
+
+void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
+			      struct phylink_config *config)
+{
+	config->mac_capabilities = MAC_100FD;
+
+	if (dev->info->supports_rgmii[port]) {
+		/* MII/RMII/RGMII ports */
+		config->mac_capabilities |= MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+					    MAC_100HD | MAC_10 | MAC_1000FD;
+	}
+}
+
+void lan937x_setup_rgmii_delay(struct ksz_device *dev, int port)
+{
+	struct ksz_port *p = &dev->ports[port];
+
+	if (p->rgmii_tx_val) {
+		lan937x_set_rgmii_tx_delay(dev, port);
+		dev_info(dev->dev, "Applied rgmii tx delay for the port %d\n",
+			 port);
+	}
+
+	if (p->rgmii_rx_val) {
+		lan937x_set_rgmii_rx_delay(dev, port);
+		dev_info(dev->dev, "Applied rgmii rx delay for the port %d\n",
+			 port);
+	}
+}
+
+int lan937x_switch_init(struct ksz_device *dev)
+{
+	dev->port_mask = (1 << dev->info->port_cnt) - 1;
+
+	return 0;
+}
+
+int lan937x_setup(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	int ret;
+
+	/* enable Indirect Access from SPI to the VPHY registers */
+	ret = lan937x_enable_spi_indirect_access(dev);
+	if (ret < 0) {
+		dev_err(dev->dev, "failed to enable spi indirect access");
+		return ret;
+	}
+
+	/* The VLAN aware is a global setting. Mixed vlan
+	 * filterings are not supported.
+	 */
+	ds->vlan_filtering_is_global = true;
+
+	/* Enable aggressive back off for half duplex & UNH mode */
+	lan937x_cfg(dev, REG_SW_MAC_CTRL_0,
+		    (SW_PAUSE_UNH_MODE | SW_NEW_BACKOFF | SW_AGGR_BACKOFF),
+		    true);
+
+	/* If NO_EXC_COLLISION_DROP bit is set, the switch will not drop
+	 * packets when 16 or more collisions occur
+	 */
+	lan937x_cfg(dev, REG_SW_MAC_CTRL_1, NO_EXC_COLLISION_DROP, true);
+
+	/* enable global MIB counter freeze function */
+	lan937x_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true);
+
+	/* disable CLK125 & CLK25, 1: disable, 0: enable */
+	lan937x_cfg(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1,
+		    (SW_CLK125_ENB | SW_CLK25_ENB), true);
+
+	return 0;
+}
+
+void lan937x_teardown(struct dsa_switch *ds)
+{
+
+}
+
+void lan937x_switch_exit(struct ksz_device *dev)
+{
+	lan937x_reset_switch(dev);
+}
+
+MODULE_AUTHOR("Arun Ramadoss <arun.ramadoss@microchip.com>");
+MODULE_DESCRIPTION("Microchip LAN937x Series Switch DSA Driver");
+MODULE_LICENSE("GPL");