Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

16 files changed, 10097 insertions, 0 deletions

diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig
new file mode 100644
index 000000000..06b1efdb5
--- /dev/null
+++ b/drivers/net/dsa/microchip/Kconfig
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig NET_DSA_MICROCHIP_KSZ_COMMON
+	tristate "Microchip KSZ8795/KSZ9477/LAN937x series switch support"
+	depends on NET_DSA
+	select NET_DSA_TAG_KSZ
+	help
+	  This driver adds support for Microchip KSZ9477 series switch and
+	  KSZ8795/KSZ88x3 switch chips.
+
+config NET_DSA_MICROCHIP_KSZ9477_I2C
+	tristate "KSZ series I2C connected switch driver"
+	depends on NET_DSA_MICROCHIP_KSZ_COMMON && I2C
+	select REGMAP_I2C
+	help
+	  Select to enable support for registering switches configured through I2C.
+
+config NET_DSA_MICROCHIP_KSZ_SPI
+	tristate "KSZ series SPI connected switch driver"
+	depends on NET_DSA_MICROCHIP_KSZ_COMMON && SPI
+	select REGMAP_SPI
+	help
+	  Select to enable support for registering switches configured through SPI.
+
+config NET_DSA_MICROCHIP_KSZ8863_SMI
+	tristate "KSZ series SMI connected switch driver"
+	depends on NET_DSA_MICROCHIP_KSZ_COMMON
+	select MDIO_BITBANG
+	help
+	  Select to enable support for registering switches configured through
+	  Microchip SMI. It supports the KSZ8863 and KSZ8873 switch.
diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
new file mode 100644
index 000000000..28873559e
--- /dev/null
+++ b/drivers/net/dsa/microchip/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON)	+= ksz_switch.o
+ksz_switch-objs := ksz_common.o
+ksz_switch-objs += ksz9477.o
+ksz_switch-objs += ksz8795.o
+ksz_switch-objs += lan937x_main.o
+obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C)	+= ksz9477_i2c.o
+obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_SPI)		+= ksz_spi.o
+obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI)	+= ksz8863_smi.o
diff --git a/drivers/net/dsa/microchip/ksz8.h b/drivers/net/dsa/microchip/ksz8.h
new file mode 100644
index 000000000..28137c4bf
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Microchip KSZ8XXX series register access
+ *
+ * Copyright (C) 2020 Pengutronix, Michael Grzeschik <kernel@pengutronix.de>
+ */
+
+#ifndef __KSZ8XXX_H
+#define __KSZ8XXX_H
+
+#include <linux/types.h>
+#include <net/dsa.h>
+#include "ksz_common.h"
+
+int ksz8_setup(struct dsa_switch *ds);
+u32 ksz8_get_port_addr(int port, int offset);
+void ksz8_cfg_port_member(struct ksz_device *dev, int port, u8 member);
+void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port);
+void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port);
+int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
+int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val);
+int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
+			 u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries);
+void ksz8_w_sta_mac_table(struct ksz_device *dev, u16 addr,
+			  struct alu_struct *alu);
+void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt);
+void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+		    u64 *dropped, u64 *cnt);
+void ksz8_freeze_mib(struct ksz_device *dev, int port, bool freeze);
+void ksz8_port_init_cnt(struct ksz_device *dev, int port);
+int ksz8_fdb_dump(struct ksz_device *dev, int port,
+		  dsa_fdb_dump_cb_t *cb, void *data);
+int ksz8_mdb_add(struct ksz_device *dev, int port,
+		 const struct switchdev_obj_port_mdb *mdb, struct dsa_db db);
+int ksz8_mdb_del(struct ksz_device *dev, int port,
+		 const struct switchdev_obj_port_mdb *mdb, struct dsa_db db);
+int ksz8_port_vlan_filtering(struct ksz_device *dev, int port, bool flag,
+			     struct netlink_ext_ack *extack);
+int ksz8_port_vlan_add(struct ksz_device *dev, int port,
+		       const struct switchdev_obj_port_vlan *vlan,
+		       struct netlink_ext_ack *extack);
+int ksz8_port_vlan_del(struct ksz_device *dev, int port,
+		       const struct switchdev_obj_port_vlan *vlan);
+int ksz8_port_mirror_add(struct ksz_device *dev, int port,
+			 struct dsa_mall_mirror_tc_entry *mirror,
+			 bool ingress, struct netlink_ext_ack *extack);
+void ksz8_port_mirror_del(struct ksz_device *dev, int port,
+			  struct dsa_mall_mirror_tc_entry *mirror);
+int ksz8_get_stp_reg(void);
+void ksz8_get_caps(struct ksz_device *dev, int port,
+		   struct phylink_config *config);
+void ksz8_config_cpu_port(struct dsa_switch *ds);
+int ksz8_enable_stp_addr(struct ksz_device *dev);
+int ksz8_reset_switch(struct ksz_device *dev);
+int ksz8_switch_detect(struct ksz_device *dev);
+int ksz8_switch_init(struct ksz_device *dev);
+void ksz8_switch_exit(struct ksz_device *dev);
+
+#endif
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
new file mode 100644
index 000000000..c63e082dc
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -0,0 +1,1420 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip KSZ8795 switch driver
+ *
+ * Copyright (C) 2017 Microchip Technology Inc.
+ *	Tristram Ha <Tristram.Ha@microchip.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio.h>
+#include <linux/if_vlan.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/microchip-ksz.h>
+#include <linux/phy.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <linux/micrel_phy.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+#include <linux/phylink.h>
+
+#include "ksz_common.h"
+#include "ksz8795_reg.h"
+#include "ksz8.h"
+
+static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
+{
+	regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
+}
+
+static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
+			 bool set)
+{
+	regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
+			   bits, set ? bits : 0);
+}
+
+static int ksz8_ind_write8(struct ksz_device *dev, u8 table, u16 addr, u8 data)
+{
+	const u16 *regs;
+	u16 ctrl_addr;
+	int ret = 0;
+
+	regs = dev->info->regs;
+
+	mutex_lock(&dev->alu_mutex);
+
+	ctrl_addr = IND_ACC_TABLE(table) | addr;
+	ret = ksz_write8(dev, regs[REG_IND_BYTE], data);
+	if (!ret)
+		ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+int ksz8_reset_switch(struct ksz_device *dev)
+{
+	if (ksz_is_ksz88x3(dev)) {
+		/* reset switch */
+		ksz_cfg(dev, KSZ8863_REG_SW_RESET,
+			KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, true);
+		ksz_cfg(dev, KSZ8863_REG_SW_RESET,
+			KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, false);
+	} else {
+		/* reset switch */
+		ksz_write8(dev, REG_POWER_MANAGEMENT_1,
+			   SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S);
+		ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0);
+	}
+
+	return 0;
+}
+
+static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue)
+{
+	u8 hi, lo;
+
+	/* Number of queues can only be 1, 2, or 4. */
+	switch (queue) {
+	case 4:
+	case 3:
+		queue = PORT_QUEUE_SPLIT_4;
+		break;
+	case 2:
+		queue = PORT_QUEUE_SPLIT_2;
+		break;
+	default:
+		queue = PORT_QUEUE_SPLIT_1;
+	}
+	ksz_pread8(dev, port, REG_PORT_CTRL_0, &lo);
+	ksz_pread8(dev, port, P_DROP_TAG_CTRL, &hi);
+	lo &= ~PORT_QUEUE_SPLIT_L;
+	if (queue & PORT_QUEUE_SPLIT_2)
+		lo |= PORT_QUEUE_SPLIT_L;
+	hi &= ~PORT_QUEUE_SPLIT_H;
+	if (queue & PORT_QUEUE_SPLIT_4)
+		hi |= PORT_QUEUE_SPLIT_H;
+	ksz_pwrite8(dev, port, REG_PORT_CTRL_0, lo);
+	ksz_pwrite8(dev, port, P_DROP_TAG_CTRL, hi);
+
+	/* Default is port based for egress rate limit. */
+	if (queue != PORT_QUEUE_SPLIT_1)
+		ksz_cfg(dev, REG_SW_CTRL_19, SW_OUT_RATE_LIMIT_QUEUE_BASED,
+			true);
+}
+
+void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt)
+{
+	const u32 *masks;
+	const u16 *regs;
+	u16 ctrl_addr;
+	u32 data;
+	u8 check;
+	int loop;
+
+	masks = dev->info->masks;
+	regs = dev->info->regs;
+
+	ctrl_addr = addr + dev->info->reg_mib_cnt * port;
+	ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
+
+	mutex_lock(&dev->alu_mutex);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+
+	/* It is almost guaranteed to always read the valid bit because of
+	 * slow SPI speed.
+	 */
+	for (loop = 2; loop > 0; loop--) {
+		ksz_read8(dev, regs[REG_IND_MIB_CHECK], &check);
+
+		if (check & masks[MIB_COUNTER_VALID]) {
+			ksz_read32(dev, regs[REG_IND_DATA_LO], &data);
+			if (check & masks[MIB_COUNTER_OVERFLOW])
+				*cnt += MIB_COUNTER_VALUE + 1;
+			*cnt += data & MIB_COUNTER_VALUE;
+			break;
+		}
+	}
+	mutex_unlock(&dev->alu_mutex);
+}
+
+static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+			      u64 *dropped, u64 *cnt)
+{
+	const u32 *masks;
+	const u16 *regs;
+	u16 ctrl_addr;
+	u32 data;
+	u8 check;
+	int loop;
+
+	masks = dev->info->masks;
+	regs = dev->info->regs;
+
+	addr -= dev->info->reg_mib_cnt;
+	ctrl_addr = (KSZ8795_MIB_TOTAL_RX_1 - KSZ8795_MIB_TOTAL_RX_0) * port;
+	ctrl_addr += addr + KSZ8795_MIB_TOTAL_RX_0;
+	ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
+
+	mutex_lock(&dev->alu_mutex);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+
+	/* It is almost guaranteed to always read the valid bit because of
+	 * slow SPI speed.
+	 */
+	for (loop = 2; loop > 0; loop--) {
+		ksz_read8(dev, regs[REG_IND_MIB_CHECK], &check);
+
+		if (check & masks[MIB_COUNTER_VALID]) {
+			ksz_read32(dev, regs[REG_IND_DATA_LO], &data);
+			if (addr < 2) {
+				u64 total;
+
+				total = check & MIB_TOTAL_BYTES_H;
+				total <<= 32;
+				*cnt += total;
+				*cnt += data;
+				if (check & masks[MIB_COUNTER_OVERFLOW]) {
+					total = MIB_TOTAL_BYTES_H + 1;
+					total <<= 32;
+					*cnt += total;
+				}
+			} else {
+				if (check & masks[MIB_COUNTER_OVERFLOW])
+					*cnt += MIB_PACKET_DROPPED + 1;
+				*cnt += data & MIB_PACKET_DROPPED;
+			}
+			break;
+		}
+	}
+	mutex_unlock(&dev->alu_mutex);
+}
+
+static void ksz8863_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+			      u64 *dropped, u64 *cnt)
+{
+	u32 *last = (u32 *)dropped;
+	const u16 *regs;
+	u16 ctrl_addr;
+	u32 data;
+	u32 cur;
+
+	regs = dev->info->regs;
+
+	addr -= dev->info->reg_mib_cnt;
+	ctrl_addr = addr ? KSZ8863_MIB_PACKET_DROPPED_TX_0 :
+			   KSZ8863_MIB_PACKET_DROPPED_RX_0;
+	ctrl_addr += port;
+	ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ);
+
+	mutex_lock(&dev->alu_mutex);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+	ksz_read32(dev, regs[REG_IND_DATA_LO], &data);
+	mutex_unlock(&dev->alu_mutex);
+
+	data &= MIB_PACKET_DROPPED;
+	cur = last[addr];
+	if (data != cur) {
+		last[addr] = data;
+		if (data < cur)
+			data += MIB_PACKET_DROPPED + 1;
+		data -= cur;
+		*cnt += data;
+	}
+}
+
+void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+		    u64 *dropped, u64 *cnt)
+{
+	if (ksz_is_ksz88x3(dev))
+		ksz8863_r_mib_pkt(dev, port, addr, dropped, cnt);
+	else
+		ksz8795_r_mib_pkt(dev, port, addr, dropped, cnt);
+}
+
+void ksz8_freeze_mib(struct ksz_device *dev, int port, bool freeze)
+{
+	if (ksz_is_ksz88x3(dev))
+		return;
+
+	/* enable the port for flush/freeze function */
+	if (freeze)
+		ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
+	ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FREEZE, freeze);
+
+	/* disable the port after freeze is done */
+	if (!freeze)
+		ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
+}
+
+void ksz8_port_init_cnt(struct ksz_device *dev, int port)
+{
+	struct ksz_port_mib *mib = &dev->ports[port].mib;
+	u64 *dropped;
+
+	if (!ksz_is_ksz88x3(dev)) {
+		/* flush all enabled port MIB counters */
+		ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true);
+		ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true);
+		ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false);
+	}
+
+	mib->cnt_ptr = 0;
+
+	/* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */
+	while (mib->cnt_ptr < dev->info->reg_mib_cnt) {
+		dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr,
+					&mib->counters[mib->cnt_ptr]);
+		++mib->cnt_ptr;
+	}
+
+	/* last one in storage */
+	dropped = &mib->counters[dev->info->mib_cnt];
+
+	/* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */
+	while (mib->cnt_ptr < dev->info->mib_cnt) {
+		dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr,
+					dropped, &mib->counters[mib->cnt_ptr]);
+		++mib->cnt_ptr;
+	}
+}
+
+static void ksz8_r_table(struct ksz_device *dev, int table, u16 addr, u64 *data)
+{
+	const u16 *regs;
+	u16 ctrl_addr;
+
+	regs = dev->info->regs;
+
+	ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr;
+
+	mutex_lock(&dev->alu_mutex);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+	ksz_read64(dev, regs[REG_IND_DATA_HI], data);
+	mutex_unlock(&dev->alu_mutex);
+}
+
+static void ksz8_w_table(struct ksz_device *dev, int table, u16 addr, u64 data)
+{
+	const u16 *regs;
+	u16 ctrl_addr;
+
+	regs = dev->info->regs;
+
+	ctrl_addr = IND_ACC_TABLE(table) | addr;
+
+	mutex_lock(&dev->alu_mutex);
+	ksz_write64(dev, regs[REG_IND_DATA_HI], data);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+	mutex_unlock(&dev->alu_mutex);
+}
+
+static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
+{
+	int timeout = 100;
+	const u32 *masks;
+	const u16 *regs;
+
+	masks = dev->info->masks;
+	regs = dev->info->regs;
+
+	do {
+		ksz_read8(dev, regs[REG_IND_DATA_CHECK], data);
+		timeout--;
+	} while ((*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) && timeout);
+
+	/* Entry is not ready for accessing. */
+	if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) {
+		return -EAGAIN;
+	/* Entry is ready for accessing. */
+	} else {
+		ksz_read8(dev, regs[REG_IND_DATA_8], data);
+
+		/* There is no valid entry in the table. */
+		if (*data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY])
+			return -ENXIO;
+	}
+	return 0;
+}
+
+int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
+			 u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries)
+{
+	u32 data_hi, data_lo;
+	const u8 *shifts;
+	const u32 *masks;
+	const u16 *regs;
+	u16 ctrl_addr;
+	u8 data;
+	int rc;
+
+	shifts = dev->info->shifts;
+	masks = dev->info->masks;
+	regs = dev->info->regs;
+
+	ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr;
+
+	mutex_lock(&dev->alu_mutex);
+	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+
+	rc = ksz8_valid_dyn_entry(dev, &data);
+	if (rc == -EAGAIN) {
+		if (addr == 0)
+			*entries = 0;
+	} else if (rc == -ENXIO) {
+		*entries = 0;
+	/* At least one valid entry in the table. */
+	} else {
+		u64 buf = 0;
+		int cnt;
+
+		ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
+		data_hi = (u32)(buf >> 32);
+		data_lo = (u32)buf;
+
+		/* Check out how many valid entry in the table. */
+		cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H];
+		cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H];
+		cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >>
+			shifts[DYNAMIC_MAC_ENTRIES];
+		*entries = cnt + 1;
+
+		*fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >>
+			shifts[DYNAMIC_MAC_FID];
+		*src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >>
+			shifts[DYNAMIC_MAC_SRC_PORT];
+		*timestamp = (data_hi & masks[DYNAMIC_MAC_TABLE_TIMESTAMP]) >>
+			shifts[DYNAMIC_MAC_TIMESTAMP];
+
+		mac_addr[5] = (u8)data_lo;
+		mac_addr[4] = (u8)(data_lo >> 8);
+		mac_addr[3] = (u8)(data_lo >> 16);
+		mac_addr[2] = (u8)(data_lo >> 24);
+
+		mac_addr[1] = (u8)data_hi;
+		mac_addr[0] = (u8)(data_hi >> 8);
+		rc = 0;
+	}
+	mutex_unlock(&dev->alu_mutex);
+
+	return rc;
+}
+
+static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr,
+				struct alu_struct *alu, bool *valid)
+{
+	u32 data_hi, data_lo;
+	const u8 *shifts;
+	const u32 *masks;
+	u64 data;
+
+	shifts = dev->info->shifts;
+	masks = dev->info->masks;
+
+	ksz8_r_table(dev, TABLE_STATIC_MAC, addr, &data);
+	data_hi = data >> 32;
+	data_lo = (u32)data;
+
+	if (!(data_hi & (masks[STATIC_MAC_TABLE_VALID] |
+			 masks[STATIC_MAC_TABLE_OVERRIDE]))) {
+		*valid = false;
+		return 0;
+	}
+
+	alu->mac[5] = (u8)data_lo;
+	alu->mac[4] = (u8)(data_lo >> 8);
+	alu->mac[3] = (u8)(data_lo >> 16);
+	alu->mac[2] = (u8)(data_lo >> 24);
+	alu->mac[1] = (u8)data_hi;
+	alu->mac[0] = (u8)(data_hi >> 8);
+	alu->port_forward =
+		(data_hi & masks[STATIC_MAC_TABLE_FWD_PORTS]) >>
+			shifts[STATIC_MAC_FWD_PORTS];
+	alu->is_override = (data_hi & masks[STATIC_MAC_TABLE_OVERRIDE]) ? 1 : 0;
+
+	/* KSZ8795 family switches have STATIC_MAC_TABLE_USE_FID and
+	 * STATIC_MAC_TABLE_FID definitions off by 1 when doing read on the
+	 * static MAC table compared to doing write.
+	 */
+	if (ksz_is_ksz87xx(dev))
+		data_hi >>= 1;
+	alu->is_static = true;
+	alu->is_use_fid = (data_hi & masks[STATIC_MAC_TABLE_USE_FID]) ? 1 : 0;
+	alu->fid = (data_hi & masks[STATIC_MAC_TABLE_FID]) >>
+		shifts[STATIC_MAC_FID];
+
+	*valid = true;
+
+	return 0;
+}
+
+void ksz8_w_sta_mac_table(struct ksz_device *dev, u16 addr,
+			  struct alu_struct *alu)
+{
+	u32 data_hi, data_lo;
+	const u8 *shifts;
+	const u32 *masks;
+	u64 data;
+
+	shifts = dev->info->shifts;
+	masks = dev->info->masks;
+
+	data_lo = ((u32)alu->mac[2] << 24) |
+		((u32)alu->mac[3] << 16) |
+		((u32)alu->mac[4] << 8) | alu->mac[5];
+	data_hi = ((u32)alu->mac[0] << 8) | alu->mac[1];
+	data_hi |= (u32)alu->port_forward << shifts[STATIC_MAC_FWD_PORTS];
+
+	if (alu->is_override)
+		data_hi |= masks[STATIC_MAC_TABLE_OVERRIDE];
+	if (alu->is_use_fid) {
+		data_hi |= masks[STATIC_MAC_TABLE_USE_FID];
+		data_hi |= (u32)alu->fid << shifts[STATIC_MAC_FID];
+	}
+	if (alu->is_static)
+		data_hi |= masks[STATIC_MAC_TABLE_VALID];
+	else
+		data_hi &= ~masks[STATIC_MAC_TABLE_OVERRIDE];
+
+	data = (u64)data_hi << 32 | data_lo;
+	ksz8_w_table(dev, TABLE_STATIC_MAC, addr, data);
+}
+
+static void ksz8_from_vlan(struct ksz_device *dev, u32 vlan, u8 *fid,
+			   u8 *member, u8 *valid)
+{
+	const u8 *shifts;
+	const u32 *masks;
+
+	shifts = dev->info->shifts;
+	masks = dev->info->masks;
+
+	*fid = vlan & masks[VLAN_TABLE_FID];
+	*member = (vlan & masks[VLAN_TABLE_MEMBERSHIP]) >>
+			shifts[VLAN_TABLE_MEMBERSHIP_S];
+	*valid = !!(vlan & masks[VLAN_TABLE_VALID]);
+}
+
+static void ksz8_to_vlan(struct ksz_device *dev, u8 fid, u8 member, u8 valid,
+			 u16 *vlan)
+{
+	const u8 *shifts;
+	const u32 *masks;
+
+	shifts = dev->info->shifts;
+	masks = dev->info->masks;
+
+	*vlan = fid;
+	*vlan |= (u16)member << shifts[VLAN_TABLE_MEMBERSHIP_S];
+	if (valid)
+		*vlan |= masks[VLAN_TABLE_VALID];
+}
+
+static void ksz8_r_vlan_entries(struct ksz_device *dev, u16 addr)
+{
+	const u8 *shifts;
+	u64 data;
+	int i;
+
+	shifts = dev->info->shifts;
+
+	ksz8_r_table(dev, TABLE_VLAN, addr, &data);
+	addr *= 4;
+	for (i = 0; i < 4; i++) {
+		dev->vlan_cache[addr + i].table[0] = (u16)data;
+		data >>= shifts[VLAN_TABLE];
+	}
+}
+
+static void ksz8_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan)
+{
+	int index;
+	u16 *data;
+	u16 addr;
+	u64 buf;
+
+	data = (u16 *)&buf;
+	addr = vid / 4;
+	index = vid & 3;
+	ksz8_r_table(dev, TABLE_VLAN, addr, &buf);
+	*vlan = data[index];
+}
+
+static void ksz8_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan)
+{
+	int index;
+	u16 *data;
+	u16 addr;
+	u64 buf;
+
+	data = (u16 *)&buf;
+	addr = vid / 4;
+	index = vid & 3;
+	ksz8_r_table(dev, TABLE_VLAN, addr, &buf);
+	data[index] = vlan;
+	dev->vlan_cache[vid].table[0] = vlan;
+	ksz8_w_table(dev, TABLE_VLAN, addr, buf);
+}
+
+int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
+{
+	u8 restart, speed, ctrl, link;
+	int processed = true;
+	const u16 *regs;
+	u8 val1, val2;
+	u16 data = 0;
+	u8 p = phy;
+	int ret;
+
+	regs = dev->info->regs;
+
+	switch (reg) {
+	case MII_BMCR:
+		ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart);
+		if (ret)
+			return ret;
+
+		ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed);
+		if (ret)
+			return ret;
+
+		ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
+		if (ret)
+			return ret;
+
+		if (restart & PORT_PHY_LOOPBACK)
+			data |= BMCR_LOOPBACK;
+		if (ctrl & PORT_FORCE_100_MBIT)
+			data |= BMCR_SPEED100;
+		if (ksz_is_ksz88x3(dev)) {
+			if ((ctrl & PORT_AUTO_NEG_ENABLE))
+				data |= BMCR_ANENABLE;
+		} else {
+			if (!(ctrl & PORT_AUTO_NEG_DISABLE))
+				data |= BMCR_ANENABLE;
+		}
+		if (restart & PORT_POWER_DOWN)
+			data |= BMCR_PDOWN;
+		if (restart & PORT_AUTO_NEG_RESTART)
+			data |= BMCR_ANRESTART;
+		if (ctrl & PORT_FORCE_FULL_DUPLEX)
+			data |= BMCR_FULLDPLX;
+		if (speed & PORT_HP_MDIX)
+			data |= KSZ886X_BMCR_HP_MDIX;
+		if (restart & PORT_FORCE_MDIX)
+			data |= KSZ886X_BMCR_FORCE_MDI;
+		if (restart & PORT_AUTO_MDIX_DISABLE)
+			data |= KSZ886X_BMCR_DISABLE_AUTO_MDIX;
+		if (restart & PORT_TX_DISABLE)
+			data |= KSZ886X_BMCR_DISABLE_TRANSMIT;
+		if (restart & PORT_LED_OFF)
+			data |= KSZ886X_BMCR_DISABLE_LED;
+		break;
+	case MII_BMSR:
+		ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link);
+		if (ret)
+			return ret;
+
+		data = BMSR_100FULL |
+		       BMSR_100HALF |
+		       BMSR_10FULL |
+		       BMSR_10HALF |
+		       BMSR_ANEGCAPABLE;
+		if (link & PORT_AUTO_NEG_COMPLETE)
+			data |= BMSR_ANEGCOMPLETE;
+		if (link & PORT_STAT_LINK_GOOD)
+			data |= BMSR_LSTATUS;
+		break;
+	case MII_PHYSID1:
+		data = KSZ8795_ID_HI;
+		break;
+	case MII_PHYSID2:
+		if (ksz_is_ksz88x3(dev))
+			data = KSZ8863_ID_LO;
+		else
+			data = KSZ8795_ID_LO;
+		break;
+	case MII_ADVERTISE:
+		ret = ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);
+		if (ret)
+			return ret;
+
+		data = ADVERTISE_CSMA;
+		if (ctrl & PORT_AUTO_NEG_SYM_PAUSE)
+			data |= ADVERTISE_PAUSE_CAP;
+		if (ctrl & PORT_AUTO_NEG_100BTX_FD)
+			data |= ADVERTISE_100FULL;
+		if (ctrl & PORT_AUTO_NEG_100BTX)
+			data |= ADVERTISE_100HALF;
+		if (ctrl & PORT_AUTO_NEG_10BT_FD)
+			data |= ADVERTISE_10FULL;
+		if (ctrl & PORT_AUTO_NEG_10BT)
+			data |= ADVERTISE_10HALF;
+		break;
+	case MII_LPA:
+		ret = ksz_pread8(dev, p, regs[P_REMOTE_STATUS], &link);
+		if (ret)
+			return ret;
+
+		data = LPA_SLCT;
+		if (link & PORT_REMOTE_SYM_PAUSE)
+			data |= LPA_PAUSE_CAP;
+		if (link & PORT_REMOTE_100BTX_FD)
+			data |= LPA_100FULL;
+		if (link & PORT_REMOTE_100BTX)
+			data |= LPA_100HALF;
+		if (link & PORT_REMOTE_10BT_FD)
+			data |= LPA_10FULL;
+		if (link & PORT_REMOTE_10BT)
+			data |= LPA_10HALF;
+		if (data & ~LPA_SLCT)
+			data |= LPA_LPACK;
+		break;
+	case PHY_REG_LINK_MD:
+		ret = ksz_pread8(dev, p, REG_PORT_LINK_MD_CTRL, &val1);
+		if (ret)
+			return ret;
+
+		ret = ksz_pread8(dev, p, REG_PORT_LINK_MD_RESULT, &val2);
+		if (ret)
+			return ret;
+
+		if (val1 & PORT_START_CABLE_DIAG)
+			data |= PHY_START_CABLE_DIAG;
+
+		if (val1 & PORT_CABLE_10M_SHORT)
+			data |= PHY_CABLE_10M_SHORT;
+
+		data |= FIELD_PREP(PHY_CABLE_DIAG_RESULT_M,
+				FIELD_GET(PORT_CABLE_DIAG_RESULT_M, val1));
+
+		data |= FIELD_PREP(PHY_CABLE_FAULT_COUNTER_M,
+				(FIELD_GET(PORT_CABLE_FAULT_COUNTER_H, val1) << 8) |
+				FIELD_GET(PORT_CABLE_FAULT_COUNTER_L, val2));
+		break;
+	case PHY_REG_PHY_CTRL:
+		ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link);
+		if (ret)
+			return ret;
+
+		if (link & PORT_MDIX_STATUS)
+			data |= KSZ886X_CTRL_MDIX_STAT;
+		break;
+	default:
+		processed = false;
+		break;
+	}
+	if (processed)
+		*val = data;
+
+	return 0;
+}
+
+int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
+{
+	u8 restart, speed, ctrl, data;
+	const u16 *regs;
+	u8 p = phy;
+	int ret;
+
+	regs = dev->info->regs;
+
+	switch (reg) {
+	case MII_BMCR:
+
+		/* Do not support PHY reset function. */
+		if (val & BMCR_RESET)
+			break;
+		ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed);
+		if (ret)
+			return ret;
+
+		data = speed;
+		if (val & KSZ886X_BMCR_HP_MDIX)
+			data |= PORT_HP_MDIX;
+		else
+			data &= ~PORT_HP_MDIX;
+
+		if (data != speed) {
+			ret = ksz_pwrite8(dev, p, regs[P_SPEED_STATUS], data);
+			if (ret)
+				return ret;
+		}
+
+		ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl);
+		if (ret)
+			return ret;
+
+		data = ctrl;
+		if (ksz_is_ksz88x3(dev)) {
+			if ((val & BMCR_ANENABLE))
+				data |= PORT_AUTO_NEG_ENABLE;
+			else
+				data &= ~PORT_AUTO_NEG_ENABLE;
+		} else {
+			if (!(val & BMCR_ANENABLE))
+				data |= PORT_AUTO_NEG_DISABLE;
+			else
+				data &= ~PORT_AUTO_NEG_DISABLE;
+
+			/* Fiber port does not support auto-negotiation. */
+			if (dev->ports[p].fiber)
+				data |= PORT_AUTO_NEG_DISABLE;
+		}
+
+		if (val & BMCR_SPEED100)
+			data |= PORT_FORCE_100_MBIT;
+		else
+			data &= ~PORT_FORCE_100_MBIT;
+		if (val & BMCR_FULLDPLX)
+			data |= PORT_FORCE_FULL_DUPLEX;
+		else
+			data &= ~PORT_FORCE_FULL_DUPLEX;
+
+		if (data != ctrl) {
+			ret = ksz_pwrite8(dev, p, regs[P_FORCE_CTRL], data);
+			if (ret)
+				return ret;
+		}
+
+		ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart);
+		if (ret)
+			return ret;
+
+		data = restart;
+		if (val & KSZ886X_BMCR_DISABLE_LED)
+			data |= PORT_LED_OFF;
+		else
+			data &= ~PORT_LED_OFF;
+		if (val & KSZ886X_BMCR_DISABLE_TRANSMIT)
+			data |= PORT_TX_DISABLE;
+		else
+			data &= ~PORT_TX_DISABLE;
+		if (val & BMCR_ANRESTART)
+			data |= PORT_AUTO_NEG_RESTART;
+		else
+			data &= ~(PORT_AUTO_NEG_RESTART);
+		if (val & BMCR_PDOWN)
+			data |= PORT_POWER_DOWN;
+		else
+			data &= ~PORT_POWER_DOWN;
+		if (val & KSZ886X_BMCR_DISABLE_AUTO_MDIX)
+			data |= PORT_AUTO_MDIX_DISABLE;
+		else
+			data &= ~PORT_AUTO_MDIX_DISABLE;
+		if (val & KSZ886X_BMCR_FORCE_MDI)
+			data |= PORT_FORCE_MDIX;
+		else
+			data &= ~PORT_FORCE_MDIX;
+		if (val & BMCR_LOOPBACK)
+			data |= PORT_PHY_LOOPBACK;
+		else
+			data &= ~PORT_PHY_LOOPBACK;
+
+		if (data != restart) {
+			ret = ksz_pwrite8(dev, p, regs[P_NEG_RESTART_CTRL],
+					  data);
+			if (ret)
+				return ret;
+		}
+		break;
+	case MII_ADVERTISE:
+		ret = ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl);
+		if (ret)
+			return ret;
+
+		data = ctrl;
+		data &= ~(PORT_AUTO_NEG_SYM_PAUSE |
+			  PORT_AUTO_NEG_100BTX_FD |
+			  PORT_AUTO_NEG_100BTX |
+			  PORT_AUTO_NEG_10BT_FD |
+			  PORT_AUTO_NEG_10BT);
+		if (val & ADVERTISE_PAUSE_CAP)
+			data |= PORT_AUTO_NEG_SYM_PAUSE;
+		if (val & ADVERTISE_100FULL)
+			data |= PORT_AUTO_NEG_100BTX_FD;
+		if (val & ADVERTISE_100HALF)
+			data |= PORT_AUTO_NEG_100BTX;
+		if (val & ADVERTISE_10FULL)
+			data |= PORT_AUTO_NEG_10BT_FD;
+		if (val & ADVERTISE_10HALF)
+			data |= PORT_AUTO_NEG_10BT;
+
+		if (data != ctrl) {
+			ret = ksz_pwrite8(dev, p, regs[P_LOCAL_CTRL], data);
+			if (ret)
+				return ret;
+		}
+		break;
+	case PHY_REG_LINK_MD:
+		if (val & PHY_START_CABLE_DIAG)
+			ksz_port_cfg(dev, p, REG_PORT_LINK_MD_CTRL, PORT_START_CABLE_DIAG, true);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+void ksz8_cfg_port_member(struct ksz_device *dev, int port, u8 member)
+{
+	u8 data;
+
+	ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+	data &= ~PORT_VLAN_MEMBERSHIP;
+	data |= (member & dev->port_mask);
+	ksz_pwrite8(dev, port, P_MIRROR_CTRL, data);
+}
+
+void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port)
+{
+	u8 learn[DSA_MAX_PORTS];
+	int first, index, cnt;
+	struct ksz_port *p;
+	const u16 *regs;
+
+	regs = dev->info->regs;
+
+	if ((uint)port < dev->info->port_cnt) {
+		first = port;
+		cnt = port + 1;
+	} else {
+		/* Flush all ports. */
+		first = 0;
+		cnt = dev->info->port_cnt;
+	}
+	for (index = first; index < cnt; index++) {
+		p = &dev->ports[index];
+		if (!p->on)
+			continue;
+		ksz_pread8(dev, index, regs[P_STP_CTRL], &learn[index]);
+		if (!(learn[index] & PORT_LEARN_DISABLE))
+			ksz_pwrite8(dev, index, regs[P_STP_CTRL],
+				    learn[index] | PORT_LEARN_DISABLE);
+	}
+	ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
+	for (index = first; index < cnt; index++) {
+		p = &dev->ports[index];
+		if (!p->on)
+			continue;
+		if (!(learn[index] & PORT_LEARN_DISABLE))
+			ksz_pwrite8(dev, index, regs[P_STP_CTRL], learn[index]);
+	}
+}
+
+int ksz8_fdb_dump(struct ksz_device *dev, int port,
+		  dsa_fdb_dump_cb_t *cb, void *data)
+{
+	int ret = 0;
+	u16 i = 0;
+	u16 entries = 0;
+	u8 timestamp = 0;
+	u8 fid;
+	u8 src_port;
+	u8 mac[ETH_ALEN];
+
+	do {
+		ret = ksz8_r_dyn_mac_table(dev, i, mac, &fid, &src_port,
+					   &timestamp, &entries);
+		if (!ret && port == src_port) {
+			ret = cb(mac, fid, false, data);
+			if (ret)
+				break;
+		}
+		i++;
+	} while (i < entries);
+	if (i >= entries)
+		ret = 0;
+
+	return ret;
+}
+
+static int ksz8_add_sta_mac(struct ksz_device *dev, int port,
+			    const unsigned char *addr, u16 vid)
+{
+	struct alu_struct alu;
+	int index, ret;
+	int empty = 0;
+
+	alu.port_forward = 0;
+	for (index = 0; index < dev->info->num_statics; index++) {
+		bool valid;
+
+		ret = ksz8_r_sta_mac_table(dev, index, &alu, &valid);
+		if (ret)
+			return ret;
+		if (!valid) {
+			/* Remember the first empty entry. */
+			if (!empty)
+				empty = index + 1;
+			continue;
+		}
+
+		if (!memcmp(alu.mac, addr, ETH_ALEN) && alu.fid == vid)
+			break;
+	}
+
+	/* no available entry */
+	if (index == dev->info->num_statics && !empty)
+		return -ENOSPC;
+
+	/* add entry */
+	if (index == dev->info->num_statics) {
+		index = empty - 1;
+		memset(&alu, 0, sizeof(alu));
+		memcpy(alu.mac, addr, ETH_ALEN);
+		alu.is_static = true;
+	}
+	alu.port_forward |= BIT(port);
+	if (vid) {
+		alu.is_use_fid = true;
+
+		/* Need a way to map VID to FID. */
+		alu.fid = vid;
+	}
+	ksz8_w_sta_mac_table(dev, index, &alu);
+
+	return 0;
+}
+
+static int ksz8_del_sta_mac(struct ksz_device *dev, int port,
+			    const unsigned char *addr, u16 vid)
+{
+	struct alu_struct alu;
+	int index, ret;
+
+	for (index = 0; index < dev->info->num_statics; index++) {
+		bool valid;
+
+		ret = ksz8_r_sta_mac_table(dev, index, &alu, &valid);
+		if (ret)
+			return ret;
+		if (!valid)
+			continue;
+
+		if (!memcmp(alu.mac, addr, ETH_ALEN) && alu.fid == vid)
+			break;
+	}
+
+	/* no available entry */
+	if (index == dev->info->num_statics)
+		goto exit;
+
+	/* clear port */
+	alu.port_forward &= ~BIT(port);
+	if (!alu.port_forward)
+		alu.is_static = false;
+	ksz8_w_sta_mac_table(dev, index, &alu);
+
+exit:
+	return 0;
+}
+
+int ksz8_mdb_add(struct ksz_device *dev, int port,
+		 const struct switchdev_obj_port_mdb *mdb, struct dsa_db db)
+{
+	return ksz8_add_sta_mac(dev, port, mdb->addr, mdb->vid);
+}
+
+int ksz8_mdb_del(struct ksz_device *dev, int port,
+		 const struct switchdev_obj_port_mdb *mdb, struct dsa_db db)
+{
+	return ksz8_del_sta_mac(dev, port, mdb->addr, mdb->vid);
+}
+
+int ksz8_port_vlan_filtering(struct ksz_device *dev, int port, bool flag,
+			     struct netlink_ext_ack *extack)
+{
+	if (ksz_is_ksz88x3(dev))
+		return -ENOTSUPP;
+
+	/* Discard packets with VID not enabled on the switch */
+	ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag);
+
+	/* Discard packets with VID not enabled on the ingress port */
+	for (port = 0; port < dev->phy_port_cnt; ++port)
+		ksz_port_cfg(dev, port, REG_PORT_CTRL_2, PORT_INGRESS_FILTER,
+			     flag);
+
+	return 0;
+}
+
+static void ksz8_port_enable_pvid(struct ksz_device *dev, int port, bool state)
+{
+	if (ksz_is_ksz88x3(dev)) {
+		ksz_cfg(dev, REG_SW_INSERT_SRC_PVID,
+			0x03 << (4 - 2 * port), state);
+	} else {
+		ksz_pwrite8(dev, port, REG_PORT_CTRL_12, state ? 0x0f : 0x00);
+	}
+}
+
+int ksz8_port_vlan_add(struct ksz_device *dev, int port,
+		       const struct switchdev_obj_port_vlan *vlan,
+		       struct netlink_ext_ack *extack)
+{
+	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+	struct ksz_port *p = &dev->ports[port];
+	u16 data, new_pvid = 0;
+	u8 fid, member, valid;
+
+	if (ksz_is_ksz88x3(dev))
+		return -ENOTSUPP;
+
+	/* If a VLAN is added with untagged flag different from the
+	 * port's Remove Tag flag, we need to change the latter.
+	 * Ignore VID 0, which is always untagged.
+	 * Ignore CPU port, which will always be tagged.
+	 */
+	if (untagged != p->remove_tag && vlan->vid != 0 &&
+	    port != dev->cpu_port) {
+		unsigned int vid;
+
+		/* Reject attempts to add a VLAN that requires the
+		 * Remove Tag flag to be changed, unless there are no
+		 * other VLANs currently configured.
+		 */
+		for (vid = 1; vid < dev->info->num_vlans; ++vid) {
+			/* Skip the VID we are going to add or reconfigure */
+			if (vid == vlan->vid)
+				continue;
+
+			ksz8_from_vlan(dev, dev->vlan_cache[vid].table[0],
+				       &fid, &member, &valid);
+			if (valid && (member & BIT(port)))
+				return -EINVAL;
+		}
+
+		ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
+		p->remove_tag = untagged;
+	}
+
+	ksz8_r_vlan_table(dev, vlan->vid, &data);
+	ksz8_from_vlan(dev, data, &fid, &member, &valid);
+
+	/* First time to setup the VLAN entry. */
+	if (!valid) {
+		/* Need to find a way to map VID to FID. */
+		fid = 1;
+		valid = 1;
+	}
+	member |= BIT(port);
+
+	ksz8_to_vlan(dev, fid, member, valid, &data);
+	ksz8_w_vlan_table(dev, vlan->vid, data);
+
+	/* change PVID */
+	if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
+		new_pvid = vlan->vid;
+
+	if (new_pvid) {
+		u16 vid;
+
+		ksz_pread16(dev, port, REG_PORT_CTRL_VID, &vid);
+		vid &= ~VLAN_VID_MASK;
+		vid |= new_pvid;
+		ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, vid);
+
+		ksz8_port_enable_pvid(dev, port, true);
+	}
+
+	return 0;
+}
+
+int ksz8_port_vlan_del(struct ksz_device *dev, int port,
+		       const struct switchdev_obj_port_vlan *vlan)
+{
+	u16 data, pvid;
+	u8 fid, member, valid;
+
+	if (ksz_is_ksz88x3(dev))
+		return -ENOTSUPP;
+
+	ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid);
+	pvid = pvid & 0xFFF;
+
+	ksz8_r_vlan_table(dev, vlan->vid, &data);
+	ksz8_from_vlan(dev, data, &fid, &member, &valid);
+
+	member &= ~BIT(port);
+
+	/* Invalidate the entry if no more member. */
+	if (!member) {
+		fid = 0;
+		valid = 0;
+	}
+
+	ksz8_to_vlan(dev, fid, member, valid, &data);
+	ksz8_w_vlan_table(dev, vlan->vid, data);
+
+	if (pvid == vlan->vid)
+		ksz8_port_enable_pvid(dev, port, false);
+
+	return 0;
+}
+
+int ksz8_port_mirror_add(struct ksz_device *dev, int port,
+			 struct dsa_mall_mirror_tc_entry *mirror,
+			 bool ingress, struct netlink_ext_ack *extack)
+{
+	if (ingress) {
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
+		dev->mirror_rx |= BIT(port);
+	} else {
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
+		dev->mirror_tx |= BIT(port);
+	}
+
+	ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
+
+	/* configure mirror port */
+	if (dev->mirror_rx || dev->mirror_tx)
+		ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+			     PORT_MIRROR_SNIFFER, true);
+
+	return 0;
+}
+
+void ksz8_port_mirror_del(struct ksz_device *dev, int port,
+			  struct dsa_mall_mirror_tc_entry *mirror)
+{
+	u8 data;
+
+	if (mirror->ingress) {
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
+		dev->mirror_rx &= ~BIT(port);
+	} else {
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
+		dev->mirror_tx &= ~BIT(port);
+	}
+
+	ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+
+	if (!dev->mirror_rx && !dev->mirror_tx)
+		ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+			     PORT_MIRROR_SNIFFER, false);
+}
+
+static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port)
+{
+	struct ksz_port *p = &dev->ports[port];
+
+	if (!p->interface && dev->compat_interface) {
+		dev_warn(dev->dev,
+			 "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+			 "Please update your device tree.\n",
+			 port);
+		p->interface = dev->compat_interface;
+	}
+}
+
+void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+	struct dsa_switch *ds = dev->ds;
+	const u32 *masks;
+	u8 member;
+
+	masks = dev->info->masks;
+
+	/* enable broadcast storm limit */
+	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
+
+	if (!ksz_is_ksz88x3(dev))
+		ksz8795_set_prio_queue(dev, port, 4);
+
+	/* disable DiffServ priority */
+	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false);
+
+	/* replace priority */
+	ksz_port_cfg(dev, port, P_802_1P_CTRL,
+		     masks[PORT_802_1P_REMAPPING], false);
+
+	/* enable 802.1p priority */
+	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
+
+	if (cpu_port) {
+		if (!ksz_is_ksz88x3(dev))
+			ksz8795_cpu_interface_select(dev, port);
+
+		member = dsa_user_ports(ds);
+	} else {
+		member = BIT(dsa_upstream_port(ds, port));
+	}
+
+	ksz8_cfg_port_member(dev, port, member);
+}
+
+void ksz8_config_cpu_port(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port *p;
+	const u32 *masks;
+	const u16 *regs;
+	u8 remote;
+	int i;
+
+	masks = dev->info->masks;
+	regs = dev->info->regs;
+
+	/* Switch marks the maximum frame with extra byte as oversize. */
+	ksz_cfg(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, true);
+	ksz_cfg(dev, regs[S_TAIL_TAG_CTRL], masks[SW_TAIL_TAG_ENABLE], true);
+
+	p = &dev->ports[dev->cpu_port];
+	p->on = 1;
+
+	ksz8_port_setup(dev, dev->cpu_port, true);
+
+	for (i = 0; i < dev->phy_port_cnt; i++) {
+		p = &dev->ports[i];
+
+		ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED);
+
+		/* Last port may be disabled. */
+		if (i == dev->phy_port_cnt)
+			break;
+		p->on = 1;
+	}
+	for (i = 0; i < dev->phy_port_cnt; i++) {
+		p = &dev->ports[i];
+		if (!p->on)
+			continue;
+		if (!ksz_is_ksz88x3(dev)) {
+			ksz_pread8(dev, i, regs[P_REMOTE_STATUS], &remote);
+			if (remote & KSZ8_PORT_FIBER_MODE)
+				p->fiber = 1;
+		}
+		if (p->fiber)
+			ksz_port_cfg(dev, i, regs[P_STP_CTRL],
+				     PORT_FORCE_FLOW_CTRL, true);
+		else
+			ksz_port_cfg(dev, i, regs[P_STP_CTRL],
+				     PORT_FORCE_FLOW_CTRL, false);
+	}
+}
+
+static int ksz8_handle_global_errata(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	int ret = 0;
+
+	/* KSZ87xx Errata DS80000687C.
+	 * Module 2: Link drops with some EEE link partners.
+	 *   An issue with the EEE next page exchange between the
+	 *   KSZ879x/KSZ877x/KSZ876x and some EEE link partners may result in
+	 *   the link dropping.
+	 */
+	if (dev->info->ksz87xx_eee_link_erratum)
+		ret = ksz8_ind_write8(dev, TABLE_EEE, REG_IND_EEE_GLOB2_HI, 0);
+
+	return ret;
+}
+
+int ksz8_enable_stp_addr(struct ksz_device *dev)
+{
+	struct alu_struct alu;
+
+	/* Setup STP address for STP operation. */
+	memset(&alu, 0, sizeof(alu));
+	ether_addr_copy(alu.mac, eth_stp_addr);
+	alu.is_static = true;
+	alu.is_override = true;
+	alu.port_forward = dev->info->cpu_ports;
+
+	ksz8_w_sta_mac_table(dev, 0, &alu);
+
+	return 0;
+}
+
+int ksz8_setup(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	int i;
+
+	ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true);
+
+	/* Enable automatic fast aging when link changed detected. */
+	ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true);
+
+	/* Enable aggressive back off algorithm in half duplex mode. */
+	regmap_update_bits(dev->regmap[0], REG_SW_CTRL_1,
+			   SW_AGGR_BACKOFF, SW_AGGR_BACKOFF);
+
+	/*
+	 * Make sure unicast VLAN boundary is set as default and
+	 * enable no excessive collision drop.
+	 */
+	regmap_update_bits(dev->regmap[0], REG_SW_CTRL_2,
+			   UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP,
+			   UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP);
+
+	ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false);
+
+	ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+
+	if (!ksz_is_ksz88x3(dev))
+		ksz_cfg(dev, REG_SW_CTRL_19, SW_INS_TAG_ENABLE, true);
+
+	for (i = 0; i < (dev->info->num_vlans / 4); i++)
+		ksz8_r_vlan_entries(dev, i);
+
+	return ksz8_handle_global_errata(ds);
+}
+
+void ksz8_get_caps(struct ksz_device *dev, int port,
+		   struct phylink_config *config)
+{
+	config->mac_capabilities = MAC_10 | MAC_100;
+
+	/* Silicon Errata Sheet (DS80000830A):
+	 * "Port 1 does not respond to received flow control PAUSE frames"
+	 * So, disable Pause support on "Port 1" (port == 0) for all ksz88x3
+	 * switches.
+	 */
+	if (!ksz_is_ksz88x3(dev) || port)
+		config->mac_capabilities |= MAC_SYM_PAUSE;
+
+	/* Asym pause is not supported on KSZ8863 and KSZ8873 */
+	if (!ksz_is_ksz88x3(dev))
+		config->mac_capabilities |= MAC_ASYM_PAUSE;
+}
+
+u32 ksz8_get_port_addr(int port, int offset)
+{
+	return PORT_CTRL_ADDR(port, offset);
+}
+
+int ksz8_switch_init(struct ksz_device *dev)
+{
+	dev->cpu_port = fls(dev->info->cpu_ports) - 1;
+	dev->phy_port_cnt = dev->info->port_cnt - 1;
+	dev->port_mask = (BIT(dev->phy_port_cnt) - 1) | dev->info->cpu_ports;
+
+	/* We rely on software untagging on the CPU port, so that we
+	 * can support both tagged and untagged VLANs
+	 */
+	dev->ds->untag_bridge_pvid = true;
+
+	/* VLAN filtering is partly controlled by the global VLAN
+	 * Enable flag
+	 */
+	dev->ds->vlan_filtering_is_global = true;
+
+	return 0;
+}
+
+void ksz8_switch_exit(struct ksz_device *dev)
+{
+	ksz8_reset_switch(dev);
+}
+
+MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ8795 Series Switch DSA Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
new file mode 100644
index 000000000..77487d611
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -0,0 +1,812 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Microchip KSZ8795 register definitions
+ *
+ * Copyright (c) 2017 Microchip Technology Inc.
+ *	Tristram Ha <Tristram.Ha@microchip.com>
+ */
+
+#ifndef __KSZ8795_REG_H
+#define __KSZ8795_REG_H
+
+#define KS_PORT_M			0x1F
+
+#define KS_PRIO_M			0x3
+#define KS_PRIO_S			2
+
+#define SW_REVISION_M			0x0E
+#define SW_REVISION_S			1
+
+#define KSZ8863_REG_SW_RESET		0x43
+
+#define KSZ8863_GLOBAL_SOFTWARE_RESET	BIT(4)
+#define KSZ8863_PCS_RESET		BIT(0)
+
+#define REG_SW_CTRL_0			0x02
+
+#define SW_NEW_BACKOFF			BIT(7)
+#define SW_GLOBAL_RESET			BIT(6)
+#define SW_FLUSH_DYN_MAC_TABLE		BIT(5)
+#define SW_FLUSH_STA_MAC_TABLE		BIT(4)
+#define SW_LINK_AUTO_AGING		BIT(0)
+
+#define REG_SW_CTRL_1			0x03
+
+#define SW_HUGE_PACKET			BIT(6)
+#define SW_TX_FLOW_CTRL_DISABLE		BIT(5)
+#define SW_RX_FLOW_CTRL_DISABLE		BIT(4)
+#define SW_CHECK_LENGTH			BIT(3)
+#define SW_AGING_ENABLE			BIT(2)
+#define SW_FAST_AGING			BIT(1)
+#define SW_AGGR_BACKOFF			BIT(0)
+
+#define REG_SW_CTRL_2			0x04
+
+#define UNICAST_VLAN_BOUNDARY		BIT(7)
+#define SW_BACK_PRESSURE		BIT(5)
+#define FAIR_FLOW_CTRL			BIT(4)
+#define NO_EXC_COLLISION_DROP		BIT(3)
+#define SW_LEGAL_PACKET_DISABLE		BIT(1)
+
+#define REG_SW_CTRL_3			0x05
+ #define WEIGHTED_FAIR_QUEUE_ENABLE	BIT(3)
+
+#define SW_VLAN_ENABLE			BIT(7)
+#define SW_IGMP_SNOOP			BIT(6)
+#define SW_MIRROR_RX_TX			BIT(0)
+
+#define REG_SW_CTRL_4			0x06
+
+#define SW_HALF_DUPLEX_FLOW_CTRL	BIT(7)
+#define SW_HALF_DUPLEX			BIT(6)
+#define SW_FLOW_CTRL			BIT(5)
+#define SW_10_MBIT			BIT(4)
+#define SW_REPLACE_VID			BIT(3)
+
+#define REG_SW_CTRL_5			0x07
+
+#define REG_SW_CTRL_6			0x08
+
+#define SW_MIB_COUNTER_FLUSH		BIT(7)
+#define SW_MIB_COUNTER_FREEZE		BIT(6)
+#define SW_MIB_COUNTER_CTRL_ENABLE	KS_PORT_M
+
+#define REG_SW_CTRL_9			0x0B
+
+#define SPI_CLK_125_MHZ			0x80
+#define SPI_CLK_62_5_MHZ		0x40
+#define SPI_CLK_31_25_MHZ		0x00
+
+#define SW_LED_MODE_M			0x3
+#define SW_LED_MODE_S			4
+#define SW_LED_LINK_ACT_SPEED		0
+#define SW_LED_LINK_ACT			1
+#define SW_LED_LINK_ACT_DUPLEX		2
+#define SW_LED_LINK_DUPLEX		3
+
+#define REG_SW_CTRL_10			0x0C
+
+#define SW_PASS_PAUSE			BIT(0)
+
+#define REG_SW_CTRL_11			0x0D
+
+#define REG_POWER_MANAGEMENT_1		0x0E
+
+#define SW_PLL_POWER_DOWN		BIT(5)
+#define SW_POWER_MANAGEMENT_MODE_M	0x3
+#define SW_POWER_MANAGEMENT_MODE_S	3
+#define SW_POWER_NORMAL			0
+#define SW_ENERGY_DETECTION		1
+#define SW_SOFTWARE_POWER_DOWN		2
+
+#define REG_POWER_MANAGEMENT_2		0x0F
+
+#define REG_PORT_1_CTRL_0		0x10
+#define REG_PORT_2_CTRL_0		0x20
+#define REG_PORT_3_CTRL_0		0x30
+#define REG_PORT_4_CTRL_0		0x40
+#define REG_PORT_5_CTRL_0		0x50
+
+#define PORT_BROADCAST_STORM		BIT(7)
+#define PORT_DIFFSERV_ENABLE		BIT(6)
+#define PORT_802_1P_ENABLE		BIT(5)
+#define PORT_BASED_PRIO_S		3
+#define PORT_BASED_PRIO_M		KS_PRIO_M
+#define PORT_BASED_PRIO_0		0
+#define PORT_BASED_PRIO_1		1
+#define PORT_BASED_PRIO_2		2
+#define PORT_BASED_PRIO_3		3
+#define PORT_INSERT_TAG			BIT(2)
+#define PORT_REMOVE_TAG			BIT(1)
+#define PORT_QUEUE_SPLIT_L		BIT(0)
+
+#define REG_PORT_1_CTRL_1		0x11
+#define REG_PORT_2_CTRL_1		0x21
+#define REG_PORT_3_CTRL_1		0x31
+#define REG_PORT_4_CTRL_1		0x41
+#define REG_PORT_5_CTRL_1		0x51
+
+#define PORT_MIRROR_SNIFFER		BIT(7)
+#define PORT_MIRROR_RX			BIT(6)
+#define PORT_MIRROR_TX			BIT(5)
+#define PORT_VLAN_MEMBERSHIP		KS_PORT_M
+
+#define REG_PORT_1_CTRL_2		0x12
+#define REG_PORT_2_CTRL_2		0x22
+#define REG_PORT_3_CTRL_2		0x32
+#define REG_PORT_4_CTRL_2		0x42
+#define REG_PORT_5_CTRL_2		0x52
+
+#define PORT_INGRESS_FILTER		BIT(6)
+#define PORT_DISCARD_NON_VID		BIT(5)
+#define PORT_FORCE_FLOW_CTRL		BIT(4)
+#define PORT_BACK_PRESSURE		BIT(3)
+
+#define REG_PORT_1_CTRL_3		0x13
+#define REG_PORT_2_CTRL_3		0x23
+#define REG_PORT_3_CTRL_3		0x33
+#define REG_PORT_4_CTRL_3		0x43
+#define REG_PORT_5_CTRL_3		0x53
+#define REG_PORT_1_CTRL_4		0x14
+#define REG_PORT_2_CTRL_4		0x24
+#define REG_PORT_3_CTRL_4		0x34
+#define REG_PORT_4_CTRL_4		0x44
+#define REG_PORT_5_CTRL_4		0x54
+
+#define PORT_DEFAULT_VID		0x0001
+
+#define REG_PORT_1_CTRL_5		0x15
+#define REG_PORT_2_CTRL_5		0x25
+#define REG_PORT_3_CTRL_5		0x35
+#define REG_PORT_4_CTRL_5		0x45
+#define REG_PORT_5_CTRL_5		0x55
+
+#define PORT_ACL_ENABLE			BIT(2)
+#define PORT_AUTHEN_MODE		0x3
+#define PORT_AUTHEN_PASS		0
+#define PORT_AUTHEN_BLOCK		1
+#define PORT_AUTHEN_TRAP		2
+
+#define REG_PORT_5_CTRL_6		0x56
+
+#define PORT_MII_INTERNAL_CLOCK		BIT(7)
+#define PORT_GMII_MAC_MODE		BIT(2)
+
+#define REG_PORT_1_CTRL_7		0x17
+#define REG_PORT_2_CTRL_7		0x27
+#define REG_PORT_3_CTRL_7		0x37
+#define REG_PORT_4_CTRL_7		0x47
+
+#define PORT_AUTO_NEG_ASYM_PAUSE	BIT(5)
+#define PORT_AUTO_NEG_SYM_PAUSE		BIT(4)
+#define PORT_AUTO_NEG_100BTX_FD		BIT(3)
+#define PORT_AUTO_NEG_100BTX		BIT(2)
+#define PORT_AUTO_NEG_10BT_FD		BIT(1)
+#define PORT_AUTO_NEG_10BT		BIT(0)
+
+#define REG_PORT_1_STATUS_0		0x18
+#define REG_PORT_2_STATUS_0		0x28
+#define REG_PORT_3_STATUS_0		0x38
+#define REG_PORT_4_STATUS_0		0x48
+
+/* For KSZ8765. */
+#define PORT_REMOTE_ASYM_PAUSE		BIT(5)
+#define PORT_REMOTE_SYM_PAUSE		BIT(4)
+#define PORT_REMOTE_100BTX_FD		BIT(3)
+#define PORT_REMOTE_100BTX		BIT(2)
+#define PORT_REMOTE_10BT_FD		BIT(1)
+#define PORT_REMOTE_10BT		BIT(0)
+
+#define REG_PORT_1_STATUS_1		0x19
+#define REG_PORT_2_STATUS_1		0x29
+#define REG_PORT_3_STATUS_1		0x39
+#define REG_PORT_4_STATUS_1		0x49
+
+#define PORT_HP_MDIX			BIT(7)
+#define PORT_REVERSED_POLARITY		BIT(5)
+#define PORT_TX_FLOW_CTRL		BIT(4)
+#define PORT_RX_FLOW_CTRL		BIT(3)
+#define PORT_STAT_SPEED_100MBIT		BIT(2)
+#define PORT_STAT_FULL_DUPLEX		BIT(1)
+
+#define PORT_REMOTE_FAULT		BIT(0)
+
+#define REG_PORT_1_LINK_MD_CTRL		0x1A
+#define REG_PORT_2_LINK_MD_CTRL		0x2A
+#define REG_PORT_3_LINK_MD_CTRL		0x3A
+#define REG_PORT_4_LINK_MD_CTRL		0x4A
+
+#define PORT_CABLE_10M_SHORT		BIT(7)
+#define PORT_CABLE_DIAG_RESULT_M	GENMASK(6, 5)
+#define PORT_CABLE_DIAG_RESULT_S	5
+#define PORT_CABLE_STAT_NORMAL		0
+#define PORT_CABLE_STAT_OPEN		1
+#define PORT_CABLE_STAT_SHORT		2
+#define PORT_CABLE_STAT_FAILED		3
+#define PORT_START_CABLE_DIAG		BIT(4)
+#define PORT_FORCE_LINK			BIT(3)
+#define PORT_POWER_SAVING		BIT(2)
+#define PORT_PHY_REMOTE_LOOPBACK	BIT(1)
+#define PORT_CABLE_FAULT_COUNTER_H	0x01
+
+#define REG_PORT_1_LINK_MD_RESULT	0x1B
+#define REG_PORT_2_LINK_MD_RESULT	0x2B
+#define REG_PORT_3_LINK_MD_RESULT	0x3B
+#define REG_PORT_4_LINK_MD_RESULT	0x4B
+
+#define PORT_CABLE_FAULT_COUNTER_L	0xFF
+#define PORT_CABLE_FAULT_COUNTER	0x1FF
+
+#define REG_PORT_1_CTRL_9		0x1C
+#define REG_PORT_2_CTRL_9		0x2C
+#define REG_PORT_3_CTRL_9		0x3C
+#define REG_PORT_4_CTRL_9		0x4C
+
+#define PORT_AUTO_NEG_ENABLE		BIT(7)
+#define PORT_AUTO_NEG_DISABLE		BIT(7)
+#define PORT_FORCE_100_MBIT		BIT(6)
+#define PORT_FORCE_FULL_DUPLEX		BIT(5)
+
+#define REG_PORT_1_CTRL_10		0x1D
+#define REG_PORT_2_CTRL_10		0x2D
+#define REG_PORT_3_CTRL_10		0x3D
+#define REG_PORT_4_CTRL_10		0x4D
+
+#define PORT_LED_OFF			BIT(7)
+#define PORT_TX_DISABLE			BIT(6)
+#define PORT_AUTO_NEG_RESTART		BIT(5)
+#define PORT_POWER_DOWN			BIT(3)
+#define PORT_AUTO_MDIX_DISABLE		BIT(2)
+#define PORT_FORCE_MDIX			BIT(1)
+#define PORT_MAC_LOOPBACK		BIT(0)
+
+#define REG_PORT_1_STATUS_2		0x1E
+#define REG_PORT_2_STATUS_2		0x2E
+#define REG_PORT_3_STATUS_2		0x3E
+#define REG_PORT_4_STATUS_2		0x4E
+
+#define PORT_MDIX_STATUS		BIT(7)
+#define PORT_AUTO_NEG_COMPLETE		BIT(6)
+#define PORT_STAT_LINK_GOOD		BIT(5)
+
+#define REG_PORT_1_STATUS_3		0x1F
+#define REG_PORT_2_STATUS_3		0x2F
+#define REG_PORT_3_STATUS_3		0x3F
+#define REG_PORT_4_STATUS_3		0x4F
+
+#define PORT_PHY_LOOPBACK		BIT(7)
+#define PORT_PHY_ISOLATE		BIT(5)
+#define PORT_PHY_SOFT_RESET		BIT(4)
+#define PORT_PHY_FORCE_LINK		BIT(3)
+#define PORT_PHY_MODE_M			0x7
+#define PHY_MODE_IN_AUTO_NEG		1
+#define PHY_MODE_10BT_HALF		2
+#define PHY_MODE_100BT_HALF		3
+#define PHY_MODE_10BT_FULL		5
+#define PHY_MODE_100BT_FULL		6
+#define PHY_MODE_ISOLDATE		7
+
+#define REG_PORT_CTRL_0			0x00
+#define REG_PORT_CTRL_1			0x01
+#define REG_PORT_CTRL_2			0x02
+#define REG_PORT_CTRL_VID		0x03
+
+#define REG_PORT_CTRL_5			0x05
+
+#define REG_PORT_STATUS_1		0x09
+#define REG_PORT_LINK_MD_CTRL		0x0A
+#define REG_PORT_LINK_MD_RESULT		0x0B
+#define REG_PORT_CTRL_9			0x0C
+#define REG_PORT_CTRL_10		0x0D
+#define REG_PORT_STATUS_3		0x0F
+
+#define REG_PORT_CTRL_12		0xA0
+#define REG_PORT_CTRL_13		0xA1
+#define REG_PORT_RATE_CTRL_3		0xA2
+#define REG_PORT_RATE_CTRL_2		0xA3
+#define REG_PORT_RATE_CTRL_1		0xA4
+#define REG_PORT_RATE_CTRL_0		0xA5
+#define REG_PORT_RATE_LIMIT		0xA6
+#define REG_PORT_IN_RATE_0		0xA7
+#define REG_PORT_IN_RATE_1		0xA8
+#define REG_PORT_IN_RATE_2		0xA9
+#define REG_PORT_IN_RATE_3		0xAA
+#define REG_PORT_OUT_RATE_0		0xAB
+#define REG_PORT_OUT_RATE_1		0xAC
+#define REG_PORT_OUT_RATE_2		0xAD
+#define REG_PORT_OUT_RATE_3		0xAE
+
+#define PORT_CTRL_ADDR(port, addr)		\
+	((addr) + REG_PORT_1_CTRL_0 + (port) *	\
+		(REG_PORT_2_CTRL_0 - REG_PORT_1_CTRL_0))
+
+#define REG_SW_MAC_ADDR_0		0x68
+#define REG_SW_MAC_ADDR_1		0x69
+#define REG_SW_MAC_ADDR_2		0x6A
+#define REG_SW_MAC_ADDR_3		0x6B
+#define REG_SW_MAC_ADDR_4		0x6C
+#define REG_SW_MAC_ADDR_5		0x6D
+
+#define TABLE_EXT_SELECT_S		5
+#define TABLE_EEE_V			1
+#define TABLE_ACL_V			2
+#define TABLE_PME_V			4
+#define TABLE_LINK_MD_V			5
+#define TABLE_EEE			(TABLE_EEE_V << TABLE_EXT_SELECT_S)
+#define TABLE_ACL			(TABLE_ACL_V << TABLE_EXT_SELECT_S)
+#define TABLE_PME			(TABLE_PME_V << TABLE_EXT_SELECT_S)
+#define TABLE_LINK_MD			(TABLE_LINK_MD << TABLE_EXT_SELECT_S)
+#define TABLE_READ			BIT(4)
+#define TABLE_SELECT_S			2
+#define TABLE_STATIC_MAC_V		0
+#define TABLE_VLAN_V			1
+#define TABLE_DYNAMIC_MAC_V		2
+#define TABLE_MIB_V			3
+#define TABLE_STATIC_MAC		(TABLE_STATIC_MAC_V << TABLE_SELECT_S)
+#define TABLE_VLAN			(TABLE_VLAN_V << TABLE_SELECT_S)
+#define TABLE_DYNAMIC_MAC		(TABLE_DYNAMIC_MAC_V << TABLE_SELECT_S)
+#define TABLE_MIB			(TABLE_MIB_V << TABLE_SELECT_S)
+
+#define REG_IND_CTRL_1			0x6F
+
+#define TABLE_ENTRY_MASK		0x03FF
+#define TABLE_EXT_ENTRY_MASK		0x0FFF
+
+#define REG_IND_DATA_5			0x73
+#define REG_IND_DATA_2			0x76
+#define REG_IND_DATA_1			0x77
+#define REG_IND_DATA_0			0x78
+
+#define REG_IND_DATA_PME_EEE_ACL	0xA0
+
+#define REG_INT_STATUS			0x7C
+#define REG_INT_ENABLE			0x7D
+
+#define INT_PME				BIT(4)
+
+#define REG_ACL_INT_STATUS		0x7E
+#define REG_ACL_INT_ENABLE		0x7F
+
+#define INT_PORT_5			BIT(4)
+#define INT_PORT_4			BIT(3)
+#define INT_PORT_3			BIT(2)
+#define INT_PORT_2			BIT(1)
+#define INT_PORT_1			BIT(0)
+
+#define INT_PORT_ALL			\
+	(INT_PORT_5 | INT_PORT_4 | INT_PORT_3 | INT_PORT_2 | INT_PORT_1)
+
+#define REG_SW_CTRL_12			0x80
+#define REG_SW_CTRL_13			0x81
+
+#define SWITCH_802_1P_MASK		3
+#define SWITCH_802_1P_BASE		3
+#define SWITCH_802_1P_SHIFT		2
+
+#define SW_802_1P_MAP_M			KS_PRIO_M
+#define SW_802_1P_MAP_S			KS_PRIO_S
+
+#define REG_SWITCH_CTRL_14		0x82
+
+#define SW_PRIO_MAPPING_M		KS_PRIO_M
+#define SW_PRIO_MAPPING_S		6
+#define SW_PRIO_MAP_3_HI		0
+#define SW_PRIO_MAP_2_HI		2
+#define SW_PRIO_MAP_0_LO		3
+
+#define REG_SW_CTRL_15			0x83
+#define REG_SW_CTRL_16			0x84
+#define REG_SW_CTRL_17			0x85
+#define REG_SW_CTRL_18			0x86
+
+#define SW_SELF_ADDR_FILTER_ENABLE	BIT(6)
+
+#define REG_SW_UNK_UCAST_CTRL		0x83
+#define REG_SW_UNK_MCAST_CTRL		0x84
+#define REG_SW_UNK_VID_CTRL		0x85
+#define REG_SW_UNK_IP_MCAST_CTRL	0x86
+
+#define SW_UNK_FWD_ENABLE		BIT(5)
+#define SW_UNK_FWD_MAP			KS_PORT_M
+
+#define REG_SW_CTRL_19			0x87
+
+#define SW_IN_RATE_LIMIT_PERIOD_M	0x3
+#define SW_IN_RATE_LIMIT_PERIOD_S	4
+#define SW_IN_RATE_LIMIT_16_MS		0
+#define SW_IN_RATE_LIMIT_64_MS		1
+#define SW_IN_RATE_LIMIT_256_MS		2
+#define SW_OUT_RATE_LIMIT_QUEUE_BASED	BIT(3)
+#define SW_INS_TAG_ENABLE		BIT(2)
+
+#define REG_TOS_PRIO_CTRL_0		0x90
+#define REG_TOS_PRIO_CTRL_1		0x91
+#define REG_TOS_PRIO_CTRL_2		0x92
+#define REG_TOS_PRIO_CTRL_3		0x93
+#define REG_TOS_PRIO_CTRL_4		0x94
+#define REG_TOS_PRIO_CTRL_5		0x95
+#define REG_TOS_PRIO_CTRL_6		0x96
+#define REG_TOS_PRIO_CTRL_7		0x97
+#define REG_TOS_PRIO_CTRL_8		0x98
+#define REG_TOS_PRIO_CTRL_9		0x99
+#define REG_TOS_PRIO_CTRL_10		0x9A
+#define REG_TOS_PRIO_CTRL_11		0x9B
+#define REG_TOS_PRIO_CTRL_12		0x9C
+#define REG_TOS_PRIO_CTRL_13		0x9D
+#define REG_TOS_PRIO_CTRL_14		0x9E
+#define REG_TOS_PRIO_CTRL_15		0x9F
+
+#define TOS_PRIO_M			KS_PRIO_M
+#define TOS_PRIO_S			KS_PRIO_S
+
+#define REG_SW_CTRL_20			0xA3
+
+#define SW_GMII_DRIVE_STRENGTH_S	4
+#define SW_DRIVE_STRENGTH_M		0x7
+#define SW_DRIVE_STRENGTH_2MA		0
+#define SW_DRIVE_STRENGTH_4MA		1
+#define SW_DRIVE_STRENGTH_8MA		2
+#define SW_DRIVE_STRENGTH_12MA		3
+#define SW_DRIVE_STRENGTH_16MA		4
+#define SW_DRIVE_STRENGTH_20MA		5
+#define SW_DRIVE_STRENGTH_24MA		6
+#define SW_DRIVE_STRENGTH_28MA		7
+#define SW_MII_DRIVE_STRENGTH_S		0
+
+#define REG_SW_CTRL_21			0xA4
+
+#define SW_IPV6_MLD_OPTION		BIT(3)
+#define SW_IPV6_MLD_SNOOP		BIT(2)
+
+#define REG_PORT_1_CTRL_12		0xB0
+#define REG_PORT_2_CTRL_12		0xC0
+#define REG_PORT_3_CTRL_12		0xD0
+#define REG_PORT_4_CTRL_12		0xE0
+#define REG_PORT_5_CTRL_12		0xF0
+
+#define PORT_PASS_ALL			BIT(6)
+#define PORT_INS_TAG_FOR_PORT_5_S	3
+#define PORT_INS_TAG_FOR_PORT_5		BIT(3)
+#define PORT_INS_TAG_FOR_PORT_4		BIT(2)
+#define PORT_INS_TAG_FOR_PORT_3		BIT(1)
+#define PORT_INS_TAG_FOR_PORT_2		BIT(0)
+
+#define REG_PORT_1_CTRL_13		0xB1
+#define REG_PORT_2_CTRL_13		0xC1
+#define REG_PORT_3_CTRL_13		0xD1
+#define REG_PORT_4_CTRL_13		0xE1
+#define REG_PORT_5_CTRL_13		0xF1
+
+#define PORT_QUEUE_SPLIT_H		BIT(1)
+#define PORT_QUEUE_SPLIT_1		0
+#define PORT_QUEUE_SPLIT_2		1
+#define PORT_QUEUE_SPLIT_4		2
+#define PORT_DROP_TAG			BIT(0)
+
+#define REG_PORT_1_CTRL_14		0xB2
+#define REG_PORT_2_CTRL_14		0xC2
+#define REG_PORT_3_CTRL_14		0xD2
+#define REG_PORT_4_CTRL_14		0xE2
+#define REG_PORT_5_CTRL_14		0xF2
+#define REG_PORT_1_CTRL_15		0xB3
+#define REG_PORT_2_CTRL_15		0xC3
+#define REG_PORT_3_CTRL_15		0xD3
+#define REG_PORT_4_CTRL_15		0xE3
+#define REG_PORT_5_CTRL_15		0xF3
+#define REG_PORT_1_CTRL_16		0xB4
+#define REG_PORT_2_CTRL_16		0xC4
+#define REG_PORT_3_CTRL_16		0xD4
+#define REG_PORT_4_CTRL_16		0xE4
+#define REG_PORT_5_CTRL_16		0xF4
+#define REG_PORT_1_CTRL_17		0xB5
+#define REG_PORT_2_CTRL_17		0xC5
+#define REG_PORT_3_CTRL_17		0xD5
+#define REG_PORT_4_CTRL_17		0xE5
+#define REG_PORT_5_CTRL_17		0xF5
+
+#define REG_PORT_1_RATE_CTRL_3		0xB2
+#define REG_PORT_1_RATE_CTRL_2		0xB3
+#define REG_PORT_1_RATE_CTRL_1		0xB4
+#define REG_PORT_1_RATE_CTRL_0		0xB5
+#define REG_PORT_2_RATE_CTRL_3		0xC2
+#define REG_PORT_2_RATE_CTRL_2		0xC3
+#define REG_PORT_2_RATE_CTRL_1		0xC4
+#define REG_PORT_2_RATE_CTRL_0		0xC5
+#define REG_PORT_3_RATE_CTRL_3		0xD2
+#define REG_PORT_3_RATE_CTRL_2		0xD3
+#define REG_PORT_3_RATE_CTRL_1		0xD4
+#define REG_PORT_3_RATE_CTRL_0		0xD5
+#define REG_PORT_4_RATE_CTRL_3		0xE2
+#define REG_PORT_4_RATE_CTRL_2		0xE3
+#define REG_PORT_4_RATE_CTRL_1		0xE4
+#define REG_PORT_4_RATE_CTRL_0		0xE5
+#define REG_PORT_5_RATE_CTRL_3		0xF2
+#define REG_PORT_5_RATE_CTRL_2		0xF3
+#define REG_PORT_5_RATE_CTRL_1		0xF4
+#define REG_PORT_5_RATE_CTRL_0		0xF5
+
+#define RATE_CTRL_ENABLE		BIT(7)
+#define RATE_RATIO_M			(BIT(7) - 1)
+
+#define PORT_OUT_RATE_ENABLE		BIT(7)
+
+#define REG_PORT_1_RATE_LIMIT		0xB6
+#define REG_PORT_2_RATE_LIMIT		0xC6
+#define REG_PORT_3_RATE_LIMIT		0xD6
+#define REG_PORT_4_RATE_LIMIT		0xE6
+#define REG_PORT_5_RATE_LIMIT		0xF6
+
+#define PORT_IN_PORT_BASED_S		6
+#define PORT_RATE_PACKET_BASED_S	5
+#define PORT_IN_FLOW_CTRL_S		4
+#define PORT_IN_LIMIT_MODE_M		0x3
+#define PORT_IN_LIMIT_MODE_S		2
+#define PORT_COUNT_IFG_S		1
+#define PORT_COUNT_PREAMBLE_S		0
+#define PORT_IN_PORT_BASED		BIT(PORT_IN_PORT_BASED_S)
+#define PORT_RATE_PACKET_BASED		BIT(PORT_RATE_PACKET_BASED_S)
+#define PORT_IN_FLOW_CTRL		BIT(PORT_IN_FLOW_CTRL_S)
+#define PORT_IN_ALL			0
+#define PORT_IN_UNICAST			1
+#define PORT_IN_MULTICAST		2
+#define PORT_IN_BROADCAST		3
+#define PORT_COUNT_IFG			BIT(PORT_COUNT_IFG_S)
+#define PORT_COUNT_PREAMBLE		BIT(PORT_COUNT_PREAMBLE_S)
+
+#define REG_PORT_1_IN_RATE_0		0xB7
+#define REG_PORT_2_IN_RATE_0		0xC7
+#define REG_PORT_3_IN_RATE_0		0xD7
+#define REG_PORT_4_IN_RATE_0		0xE7
+#define REG_PORT_5_IN_RATE_0		0xF7
+#define REG_PORT_1_IN_RATE_1		0xB8
+#define REG_PORT_2_IN_RATE_1		0xC8
+#define REG_PORT_3_IN_RATE_1		0xD8
+#define REG_PORT_4_IN_RATE_1		0xE8
+#define REG_PORT_5_IN_RATE_1		0xF8
+#define REG_PORT_1_IN_RATE_2		0xB9
+#define REG_PORT_2_IN_RATE_2		0xC9
+#define REG_PORT_3_IN_RATE_2		0xD9
+#define REG_PORT_4_IN_RATE_2		0xE9
+#define REG_PORT_5_IN_RATE_2		0xF9
+#define REG_PORT_1_IN_RATE_3		0xBA
+#define REG_PORT_2_IN_RATE_3		0xCA
+#define REG_PORT_3_IN_RATE_3		0xDA
+#define REG_PORT_4_IN_RATE_3		0xEA
+#define REG_PORT_5_IN_RATE_3		0xFA
+
+#define PORT_IN_RATE_ENABLE		BIT(7)
+#define PORT_RATE_LIMIT_M		(BIT(7) - 1)
+
+#define REG_PORT_1_OUT_RATE_0		0xBB
+#define REG_PORT_2_OUT_RATE_0		0xCB
+#define REG_PORT_3_OUT_RATE_0		0xDB
+#define REG_PORT_4_OUT_RATE_0		0xEB
+#define REG_PORT_5_OUT_RATE_0		0xFB
+#define REG_PORT_1_OUT_RATE_1		0xBC
+#define REG_PORT_2_OUT_RATE_1		0xCC
+#define REG_PORT_3_OUT_RATE_1		0xDC
+#define REG_PORT_4_OUT_RATE_1		0xEC
+#define REG_PORT_5_OUT_RATE_1		0xFC
+#define REG_PORT_1_OUT_RATE_2		0xBD
+#define REG_PORT_2_OUT_RATE_2		0xCD
+#define REG_PORT_3_OUT_RATE_2		0xDD
+#define REG_PORT_4_OUT_RATE_2		0xED
+#define REG_PORT_5_OUT_RATE_2		0xFD
+#define REG_PORT_1_OUT_RATE_3		0xBE
+#define REG_PORT_2_OUT_RATE_3		0xCE
+#define REG_PORT_3_OUT_RATE_3		0xDE
+#define REG_PORT_4_OUT_RATE_3		0xEE
+#define REG_PORT_5_OUT_RATE_3		0xFE
+
+/* 88x3 specific */
+
+#define REG_SW_INSERT_SRC_PVID		0xC2
+
+/* PME */
+
+#define SW_PME_OUTPUT_ENABLE		BIT(1)
+#define SW_PME_ACTIVE_HIGH		BIT(0)
+
+#define PORT_MAGIC_PACKET_DETECT	BIT(2)
+#define PORT_LINK_UP_DETECT		BIT(1)
+#define PORT_ENERGY_DETECT		BIT(0)
+
+/* ACL */
+
+#define ACL_FIRST_RULE_M		0xF
+
+#define ACL_MODE_M			0x3
+#define ACL_MODE_S			4
+#define ACL_MODE_DISABLE		0
+#define ACL_MODE_LAYER_2		1
+#define ACL_MODE_LAYER_3		2
+#define ACL_MODE_LAYER_4		3
+#define ACL_ENABLE_M			0x3
+#define ACL_ENABLE_S			2
+#define ACL_ENABLE_2_COUNT		0
+#define ACL_ENABLE_2_TYPE		1
+#define ACL_ENABLE_2_MAC		2
+#define ACL_ENABLE_2_BOTH		3
+#define ACL_ENABLE_3_IP			1
+#define ACL_ENABLE_3_SRC_DST_COMP	2
+#define ACL_ENABLE_4_PROTOCOL		0
+#define ACL_ENABLE_4_TCP_PORT_COMP	1
+#define ACL_ENABLE_4_UDP_PORT_COMP	2
+#define ACL_ENABLE_4_TCP_SEQN_COMP	3
+#define ACL_SRC				BIT(1)
+#define ACL_EQUAL			BIT(0)
+
+#define ACL_MAX_PORT			0xFFFF
+
+#define ACL_MIN_PORT			0xFFFF
+#define ACL_IP_ADDR			0xFFFFFFFF
+#define ACL_TCP_SEQNUM			0xFFFFFFFF
+
+#define ACL_RESERVED			0xF8
+#define ACL_PORT_MODE_M			0x3
+#define ACL_PORT_MODE_S			1
+#define ACL_PORT_MODE_DISABLE		0
+#define ACL_PORT_MODE_EITHER		1
+#define ACL_PORT_MODE_IN_RANGE		2
+#define ACL_PORT_MODE_OUT_OF_RANGE	3
+
+#define ACL_TCP_FLAG_ENABLE		BIT(0)
+
+#define ACL_TCP_FLAG_M			0xFF
+
+#define ACL_TCP_FLAG			0xFF
+#define ACL_ETH_TYPE			0xFFFF
+#define ACL_IP_M			0xFFFFFFFF
+
+#define ACL_PRIO_MODE_M			0x3
+#define ACL_PRIO_MODE_S			6
+#define ACL_PRIO_MODE_DISABLE		0
+#define ACL_PRIO_MODE_HIGHER		1
+#define ACL_PRIO_MODE_LOWER		2
+#define ACL_PRIO_MODE_REPLACE		3
+#define ACL_PRIO_M			0x7
+#define ACL_PRIO_S			3
+#define ACL_VLAN_PRIO_REPLACE		BIT(2)
+#define ACL_VLAN_PRIO_M			0x7
+#define ACL_VLAN_PRIO_HI_M		0x3
+
+#define ACL_VLAN_PRIO_LO_M		0x8
+#define ACL_VLAN_PRIO_S			7
+#define ACL_MAP_MODE_M			0x3
+#define ACL_MAP_MODE_S			5
+#define ACL_MAP_MODE_DISABLE		0
+#define ACL_MAP_MODE_OR			1
+#define ACL_MAP_MODE_AND		2
+#define ACL_MAP_MODE_REPLACE		3
+#define ACL_MAP_PORT_M			0x1F
+
+#define ACL_CNT_M			(BIT(11) - 1)
+#define ACL_CNT_S			5
+#define ACL_MSEC_UNIT			BIT(4)
+#define ACL_INTR_MODE			BIT(3)
+
+#define REG_PORT_ACL_BYTE_EN_MSB	0x10
+
+#define ACL_BYTE_EN_MSB_M		0x3F
+
+#define REG_PORT_ACL_BYTE_EN_LSB	0x11
+
+#define ACL_ACTION_START		0xA
+#define ACL_ACTION_LEN			2
+#define ACL_INTR_CNT_START		0xB
+#define ACL_RULESET_START		0xC
+#define ACL_RULESET_LEN			2
+#define ACL_TABLE_LEN			14
+
+#define ACL_ACTION_ENABLE		0x000C
+#define ACL_MATCH_ENABLE		0x1FF0
+#define ACL_RULESET_ENABLE		0x2003
+#define ACL_BYTE_ENABLE			((ACL_BYTE_EN_MSB_M << 8) | 0xFF)
+#define ACL_MODE_ENABLE			(0x10 << 8)
+
+#define REG_PORT_ACL_CTRL_0		0x12
+
+#define PORT_ACL_WRITE_DONE		BIT(6)
+#define PORT_ACL_READ_DONE		BIT(5)
+#define PORT_ACL_WRITE			BIT(4)
+#define PORT_ACL_INDEX_M		0xF
+
+#define REG_PORT_ACL_CTRL_1		0x13
+
+#define PORT_ACL_FORCE_DLR_MISS		BIT(0)
+
+#define KSZ8795_ID_HI			0x0022
+#define KSZ8795_ID_LO			0x1550
+#define KSZ8863_ID_LO			0x1430
+
+#define KSZ8795_SW_ID			0x8795
+
+#define PHY_REG_LINK_MD			0x1D
+
+#define PHY_START_CABLE_DIAG		BIT(15)
+#define PHY_CABLE_DIAG_RESULT_M		GENMASK(14, 13)
+#define PHY_CABLE_DIAG_RESULT		0x6000
+#define PHY_CABLE_STAT_NORMAL		0x0000
+#define PHY_CABLE_STAT_OPEN		0x2000
+#define PHY_CABLE_STAT_SHORT		0x4000
+#define PHY_CABLE_STAT_FAILED		0x6000
+#define PHY_CABLE_10M_SHORT		BIT(12)
+#define PHY_CABLE_FAULT_COUNTER_M	GENMASK(8, 0)
+
+#define PHY_REG_PHY_CTRL		0x1F
+
+#define PHY_MODE_M			0x7
+#define PHY_MODE_S			8
+#define PHY_STAT_REVERSED_POLARITY	BIT(5)
+#define PHY_STAT_MDIX			BIT(4)
+#define PHY_FORCE_LINK			BIT(3)
+#define PHY_POWER_SAVING_ENABLE		BIT(2)
+#define PHY_REMOTE_LOOPBACK		BIT(1)
+
+/* Chip resource */
+
+#define PRIO_QUEUES			4
+
+#define KS_PRIO_IN_REG			4
+
+#define MIB_COUNTER_NUM		0x20
+
+/* Common names used by other drivers */
+
+#define P_BCAST_STORM_CTRL		REG_PORT_CTRL_0
+#define P_PRIO_CTRL			REG_PORT_CTRL_0
+#define P_TAG_CTRL			REG_PORT_CTRL_0
+#define P_MIRROR_CTRL			REG_PORT_CTRL_1
+#define P_802_1P_CTRL			REG_PORT_CTRL_2
+#define P_PASS_ALL_CTRL			REG_PORT_CTRL_12
+#define P_INS_SRC_PVID_CTRL		REG_PORT_CTRL_12
+#define P_DROP_TAG_CTRL			REG_PORT_CTRL_13
+#define P_RATE_LIMIT_CTRL		REG_PORT_RATE_LIMIT
+
+#define S_UNKNOWN_DA_CTRL		REG_SWITCH_CTRL_12
+#define S_FORWARD_INVALID_VID_CTRL	REG_FORWARD_INVALID_VID
+
+#define S_FLUSH_TABLE_CTRL		REG_SW_CTRL_0
+#define S_LINK_AGING_CTRL		REG_SW_CTRL_0
+#define S_HUGE_PACKET_CTRL		REG_SW_CTRL_1
+#define S_MIRROR_CTRL			REG_SW_CTRL_3
+#define S_REPLACE_VID_CTRL		REG_SW_CTRL_4
+#define S_PASS_PAUSE_CTRL		REG_SW_CTRL_10
+#define S_802_1P_PRIO_CTRL		REG_SW_CTRL_12
+#define S_TOS_PRIO_CTRL			REG_TOS_PRIO_CTRL_0
+#define S_IPV6_MLD_CTRL			REG_SW_CTRL_21
+
+#define IND_ACC_TABLE(table)		((table) << 8)
+
+/* */
+#define REG_IND_EEE_GLOB2_LO		0x34
+#define REG_IND_EEE_GLOB2_HI		0x35
+
+/**
+ * MIB_COUNTER_VALUE			00-00000000-3FFFFFFF
+ * MIB_TOTAL_BYTES			00-0000000F-FFFFFFFF
+ * MIB_PACKET_DROPPED			00-00000000-0000FFFF
+ * MIB_COUNTER_VALID			00-00000020-00000000
+ * MIB_COUNTER_OVERFLOW			00-00000040-00000000
+ */
+
+#define MIB_COUNTER_VALUE		0x3FFFFFFF
+
+#define KSZ8795_MIB_TOTAL_RX_0		0x100
+#define KSZ8795_MIB_TOTAL_TX_0		0x101
+#define KSZ8795_MIB_TOTAL_RX_1		0x104
+#define KSZ8795_MIB_TOTAL_TX_1		0x105
+
+#define KSZ8863_MIB_PACKET_DROPPED_TX_0 0x100
+#define KSZ8863_MIB_PACKET_DROPPED_RX_0 0x105
+
+#define MIB_PACKET_DROPPED		0x0000FFFF
+
+#define MIB_TOTAL_BYTES_H		0x0000000F
+
+#define TAIL_TAG_OVERRIDE		BIT(6)
+#define TAIL_TAG_LOOKUP			BIT(7)
+
+#define FID_ENTRIES			128
+
+#endif
diff --git a/drivers/net/dsa/microchip/ksz8863_smi.c b/drivers/net/dsa/microchip/ksz8863_smi.c
new file mode 100644
index 000000000..ed77ac222
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz8863_smi.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip KSZ8863 series register access through SMI
+ *
+ * Copyright (C) 2019 Pengutronix, Michael Grzeschik <kernel@pengutronix.de>
+ */
+
+#include "ksz8.h"
+#include "ksz_common.h"
+
+/* Serial Management Interface (SMI) uses the following frame format:
+ *
+ *       preamble|start|Read/Write|  PHY   |  REG  |TA|   Data bits      | Idle
+ *               |frame| OP code  |address |address|  |                  |
+ * read | 32x1´s | 01  |    00    | 1xRRR  | RRRRR |Z0| 00000000DDDDDDDD |  Z
+ * write| 32x1´s | 01  |    00    | 0xRRR  | RRRRR |10| xxxxxxxxDDDDDDDD |  Z
+ *
+ */
+
+#define SMI_KSZ88XX_READ_PHY	BIT(4)
+
+static int ksz8863_mdio_read(void *ctx, const void *reg_buf, size_t reg_len,
+			     void *val_buf, size_t val_len)
+{
+	struct ksz_device *dev = ctx;
+	struct mdio_device *mdev;
+	u8 reg = *(u8 *)reg_buf;
+	u8 *val = val_buf;
+	int i, ret = 0;
+
+	mdev = dev->priv;
+
+	mutex_lock_nested(&mdev->bus->mdio_lock, MDIO_MUTEX_NESTED);
+	for (i = 0; i < val_len; i++) {
+		int tmp = reg + i;
+
+		ret = __mdiobus_read(mdev->bus, ((tmp & 0xE0) >> 5) |
+				     SMI_KSZ88XX_READ_PHY, tmp);
+		if (ret < 0)
+			goto out;
+
+		val[i] = ret;
+	}
+	ret = 0;
+
+ out:
+	mutex_unlock(&mdev->bus->mdio_lock);
+
+	return ret;
+}
+
+static int ksz8863_mdio_write(void *ctx, const void *data, size_t count)
+{
+	struct ksz_device *dev = ctx;
+	struct mdio_device *mdev;
+	int i, ret = 0;
+	u32 reg;
+	u8 *val;
+
+	mdev = dev->priv;
+
+	val = (u8 *)(data + 4);
+	reg = *(u32 *)data;
+
+	mutex_lock_nested(&mdev->bus->mdio_lock, MDIO_MUTEX_NESTED);
+	for (i = 0; i < (count - 4); i++) {
+		int tmp = reg + i;
+
+		ret = __mdiobus_write(mdev->bus, ((tmp & 0xE0) >> 5),
+				      tmp, val[i]);
+		if (ret < 0)
+			goto out;
+	}
+
+ out:
+	mutex_unlock(&mdev->bus->mdio_lock);
+
+	return ret;
+}
+
+static const struct regmap_bus regmap_smi[] = {
+	{
+		.read = ksz8863_mdio_read,
+		.write = ksz8863_mdio_write,
+	},
+	{
+		.read = ksz8863_mdio_read,
+		.write = ksz8863_mdio_write,
+		.val_format_endian_default = REGMAP_ENDIAN_BIG,
+	},
+	{
+		.read = ksz8863_mdio_read,
+		.write = ksz8863_mdio_write,
+		.val_format_endian_default = REGMAP_ENDIAN_BIG,
+	}
+};
+
+static const struct regmap_config ksz8863_regmap_config[] = {
+	{
+		.name = "#8",
+		.reg_bits = 8,
+		.pad_bits = 24,
+		.val_bits = 8,
+		.cache_type = REGCACHE_NONE,
+		.lock = ksz_regmap_lock,
+		.unlock = ksz_regmap_unlock,
+	},
+	{
+		.name = "#16",
+		.reg_bits = 8,
+		.pad_bits = 24,
+		.val_bits = 16,
+		.cache_type = REGCACHE_NONE,
+		.lock = ksz_regmap_lock,
+		.unlock = ksz_regmap_unlock,
+	},
+	{
+		.name = "#32",
+		.reg_bits = 8,
+		.pad_bits = 24,
+		.val_bits = 32,
+		.cache_type = REGCACHE_NONE,
+		.lock = ksz_regmap_lock,
+		.unlock = ksz_regmap_unlock,
+	}
+};
+
+static int ksz8863_smi_probe(struct mdio_device *mdiodev)
+{
+	struct regmap_config rc;
+	struct ksz_device *dev;
+	int ret;
+	int i;
+
+	dev = ksz_switch_alloc(&mdiodev->dev, mdiodev);
+	if (!dev)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(ksz8863_regmap_config); i++) {
+		rc = ksz8863_regmap_config[i];
+		rc.lock_arg = &dev->regmap_mutex;
+		dev->regmap[i] = devm_regmap_init(&mdiodev->dev,
+						  &regmap_smi[i], dev,
+						  &rc);
+		if (IS_ERR(dev->regmap[i])) {
+			ret = PTR_ERR(dev->regmap[i]);
+			dev_err(&mdiodev->dev,
+				"Failed to initialize regmap%i: %d\n",
+				ksz8863_regmap_config[i].val_bits, ret);
+			return ret;
+		}
+	}
+
+	if (mdiodev->dev.platform_data)
+		dev->pdata = mdiodev->dev.platform_data;
+
+	ret = ksz_switch_register(dev);
+
+	/* Main DSA driver may not be started yet. */
+	if (ret)
+		return ret;
+
+	dev_set_drvdata(&mdiodev->dev, dev);
+
+	return 0;
+}
+
+static void ksz8863_smi_remove(struct mdio_device *mdiodev)
+{
+	struct ksz_device *dev = dev_get_drvdata(&mdiodev->dev);
+
+	if (dev)
+		ksz_switch_remove(dev);
+}
+
+static void ksz8863_smi_shutdown(struct mdio_device *mdiodev)
+{
+	struct ksz_device *dev = dev_get_drvdata(&mdiodev->dev);
+
+	if (dev)
+		dsa_switch_shutdown(dev->ds);
+
+	dev_set_drvdata(&mdiodev->dev, NULL);
+}
+
+static const struct of_device_id ksz8863_dt_ids[] = {
+	{
+		.compatible = "microchip,ksz8863",
+		.data = &ksz_switch_chips[KSZ8830]
+	},
+	{
+		.compatible = "microchip,ksz8873",
+		.data = &ksz_switch_chips[KSZ8830]
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ksz8863_dt_ids);
+
+static struct mdio_driver ksz8863_driver = {
+	.probe	= ksz8863_smi_probe,
+	.remove	= ksz8863_smi_remove,
+	.shutdown = ksz8863_smi_shutdown,
+	.mdiodrv.driver = {
+		.name	= "ksz8863-switch",
+		.of_match_table = ksz8863_dt_ids,
+	},
+};
+
+mdio_module_driver(ksz8863_driver);
+
+MODULE_AUTHOR("Michael Grzeschik <m.grzeschik@pengutronix.de>");
+MODULE_DESCRIPTION("Microchip KSZ8863 SMI Switch driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
new file mode 100644
index 000000000..a73697147
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -0,0 +1,1202 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip KSZ9477 switch driver main logic
+ *
+ * Copyright (C) 2017-2019 Microchip Technology Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/iopoll.h>
+#include <linux/platform_data/microchip-ksz.h>
+#include <linux/phy.h>
+#include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "ksz9477_reg.h"
+#include "ksz_common.h"
+#include "ksz9477.h"
+
+static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
+{
+	regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
+}
+
+static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
+			 bool set)
+{
+	regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
+			   bits, set ? bits : 0);
+}
+
+static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
+{
+	regmap_update_bits(dev->regmap[2], addr, bits, set ? bits : 0);
+}
+
+static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
+			       u32 bits, bool set)
+{
+	regmap_update_bits(dev->regmap[2], PORT_CTRL_ADDR(port, offset),
+			   bits, set ? bits : 0);
+}
+
+int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu)
+{
+	u16 frame_size, max_frame = 0;
+	int i;
+
+	frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+	/* Cache the per-port MTU setting */
+	dev->ports[port].max_frame = frame_size;
+
+	for (i = 0; i < dev->info->port_cnt; i++)
+		max_frame = max(max_frame, dev->ports[i].max_frame);
+
+	return regmap_update_bits(dev->regmap[1], REG_SW_MTU__2,
+				  REG_SW_MTU_MASK, max_frame);
+}
+
+int ksz9477_max_mtu(struct ksz_device *dev, int port)
+{
+	return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
+}
+
+static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout(dev->regmap[0], REG_SW_VLAN_CTRL,
+					val, !(val & VLAN_START), 10, 1000);
+}
+
+static int ksz9477_get_vlan_table(struct ksz_device *dev, u16 vid,
+				  u32 *vlan_table)
+{
+	int ret;
+
+	mutex_lock(&dev->vlan_mutex);
+
+	ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+	ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
+
+	/* wait to be cleared */
+	ret = ksz9477_wait_vlan_ctrl_ready(dev);
+	if (ret) {
+		dev_dbg(dev->dev, "Failed to read vlan table\n");
+		goto exit;
+	}
+
+	ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
+	ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
+	ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
+
+	ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+exit:
+	mutex_unlock(&dev->vlan_mutex);
+
+	return ret;
+}
+
+static int ksz9477_set_vlan_table(struct ksz_device *dev, u16 vid,
+				  u32 *vlan_table)
+{
+	int ret;
+
+	mutex_lock(&dev->vlan_mutex);
+
+	ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
+	ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
+	ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
+
+	ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+	ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
+
+	/* wait to be cleared */
+	ret = ksz9477_wait_vlan_ctrl_ready(dev);
+	if (ret) {
+		dev_dbg(dev->dev, "Failed to write vlan table\n");
+		goto exit;
+	}
+
+	ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+	/* update vlan cache table */
+	dev->vlan_cache[vid].table[0] = vlan_table[0];
+	dev->vlan_cache[vid].table[1] = vlan_table[1];
+	dev->vlan_cache[vid].table[2] = vlan_table[2];
+
+exit:
+	mutex_unlock(&dev->vlan_mutex);
+
+	return ret;
+}
+
+static void ksz9477_read_table(struct ksz_device *dev, u32 *table)
+{
+	ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
+	ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
+	ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
+	ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
+}
+
+static void ksz9477_write_table(struct ksz_device *dev, u32 *table)
+{
+	ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
+	ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
+	ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
+	ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
+}
+
+static int ksz9477_wait_alu_ready(struct ksz_device *dev)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout(dev->regmap[2], REG_SW_ALU_CTRL__4,
+					val, !(val & ALU_START), 10, 1000);
+}
+
+static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev)
+{
+	unsigned int val;
+
+	return regmap_read_poll_timeout(dev->regmap[2],
+					REG_SW_ALU_STAT_CTRL__4,
+					val, !(val & ALU_STAT_START),
+					10, 1000);
+}
+
+int ksz9477_reset_switch(struct ksz_device *dev)
+{
+	u8 data8;
+	u32 data32;
+
+	/* reset switch */
+	ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
+
+	/* turn off SPI DO Edge select */
+	regmap_update_bits(dev->regmap[0], REG_SW_GLOBAL_SERIAL_CTRL_0,
+			   SPI_AUTO_EDGE_DETECTION, 0);
+
+	/* default configuration */
+	ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
+	data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
+	      SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
+	ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+
+	/* disable interrupts */
+	ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
+	ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
+	ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
+
+	/* KSZ9893 compatible chips do not support refclk configuration */
+	if (dev->chip_id == KSZ9893_CHIP_ID ||
+	    dev->chip_id == KSZ8563_CHIP_ID)
+		return 0;
+
+	data8 = SW_ENABLE_REFCLKO;
+	if (dev->synclko_disable)
+		data8 = 0;
+	else if (dev->synclko_125)
+		data8 = SW_ENABLE_REFCLKO | SW_REFCLKO_IS_125MHZ;
+	ksz_write8(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1, data8);
+
+	return 0;
+}
+
+void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt)
+{
+	struct ksz_port *p = &dev->ports[port];
+	unsigned int val;
+	u32 data;
+	int ret;
+
+	/* retain the flush/freeze bit */
+	data = p->freeze ? MIB_COUNTER_FLUSH_FREEZE : 0;
+	data |= MIB_COUNTER_READ;
+	data |= (addr << MIB_COUNTER_INDEX_S);
+	ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
+
+	ret = regmap_read_poll_timeout(dev->regmap[2],
+			PORT_CTRL_ADDR(port, REG_PORT_MIB_CTRL_STAT__4),
+			val, !(val & MIB_COUNTER_READ), 10, 1000);
+	/* failed to read MIB. get out of loop */
+	if (ret) {
+		dev_dbg(dev->dev, "Failed to get MIB\n");
+		return;
+	}
+
+	/* count resets upon read */
+	ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
+	*cnt += data;
+}
+
+void ksz9477_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+		       u64 *dropped, u64 *cnt)
+{
+	addr = dev->info->mib_names[addr].index;
+	ksz9477_r_mib_cnt(dev, port, addr, cnt);
+}
+
+void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze)
+{
+	u32 val = freeze ? MIB_COUNTER_FLUSH_FREEZE : 0;
+	struct ksz_port *p = &dev->ports[port];
+
+	/* enable/disable the port for flush/freeze function */
+	mutex_lock(&p->mib.cnt_mutex);
+	ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, val);
+
+	/* used by MIB counter reading code to know freeze is enabled */
+	p->freeze = freeze;
+	mutex_unlock(&p->mib.cnt_mutex);
+}
+
+void ksz9477_port_init_cnt(struct ksz_device *dev, int port)
+{
+	struct ksz_port_mib *mib = &dev->ports[port].mib;
+
+	/* flush all enabled port MIB counters */
+	mutex_lock(&mib->cnt_mutex);
+	ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
+		     MIB_COUNTER_FLUSH_FREEZE);
+	ksz_write8(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FLUSH);
+	ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, 0);
+	mutex_unlock(&mib->cnt_mutex);
+}
+
+static void ksz9477_r_phy_quirks(struct ksz_device *dev, u16 addr, u16 reg,
+				 u16 *data)
+{
+	/* KSZ8563R do not have extended registers but BMSR_ESTATEN and
+	 * BMSR_ERCAP bits are set.
+	 */
+	if (dev->chip_id == KSZ8563_CHIP_ID && reg == MII_BMSR)
+		*data &= ~(BMSR_ESTATEN | BMSR_ERCAP);
+}
+
+int ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data)
+{
+	u16 val = 0xffff;
+	int ret;
+
+	/* No real PHY after this. Simulate the PHY.
+	 * A fixed PHY can be setup in the device tree, but this function is
+	 * still called for that port during initialization.
+	 * For RGMII PHY there is no way to access it so the fixed PHY should
+	 * be used.  For SGMII PHY the supporting code will be added later.
+	 */
+	if (!dev->info->internal_phy[addr]) {
+		struct ksz_port *p = &dev->ports[addr];
+
+		switch (reg) {
+		case MII_BMCR:
+			val = 0x1140;
+			break;
+		case MII_BMSR:
+			val = 0x796d;
+			break;
+		case MII_PHYSID1:
+			val = 0x0022;
+			break;
+		case MII_PHYSID2:
+			val = 0x1631;
+			break;
+		case MII_ADVERTISE:
+			val = 0x05e1;
+			break;
+		case MII_LPA:
+			val = 0xc5e1;
+			break;
+		case MII_CTRL1000:
+			val = 0x0700;
+			break;
+		case MII_STAT1000:
+			if (p->phydev.speed == SPEED_1000)
+				val = 0x3800;
+			else
+				val = 0;
+			break;
+		}
+	} else {
+		ret = ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
+		if (ret)
+			return ret;
+
+		ksz9477_r_phy_quirks(dev, addr, reg, &val);
+	}
+
+	*data = val;
+
+	return 0;
+}
+
+int ksz9477_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val)
+{
+	/* No real PHY after this. */
+	if (!dev->info->internal_phy[addr])
+		return 0;
+
+	return ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
+}
+
+void ksz9477_cfg_port_member(struct ksz_device *dev, int port, u8 member)
+{
+	ksz_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member);
+}
+
+void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
+{
+	const u16 *regs = dev->info->regs;
+	u8 data;
+
+	regmap_update_bits(dev->regmap[0], REG_SW_LUE_CTRL_2,
+			   SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S,
+			   SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S);
+
+	if (port < dev->info->port_cnt) {
+		/* flush individual port */
+		ksz_pread8(dev, port, regs[P_STP_CTRL], &data);
+		if (!(data & PORT_LEARN_DISABLE))
+			ksz_pwrite8(dev, port, regs[P_STP_CTRL],
+				    data | PORT_LEARN_DISABLE);
+		ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
+		ksz_pwrite8(dev, port, regs[P_STP_CTRL], data);
+	} else {
+		/* flush all */
+		ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_STP_TABLE, true);
+	}
+}
+
+int ksz9477_port_vlan_filtering(struct ksz_device *dev, int port,
+				bool flag, struct netlink_ext_ack *extack)
+{
+	if (flag) {
+		ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+			     PORT_VLAN_LOOKUP_VID_0, true);
+		ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
+	} else {
+		ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
+		ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+			     PORT_VLAN_LOOKUP_VID_0, false);
+	}
+
+	return 0;
+}
+
+int ksz9477_port_vlan_add(struct ksz_device *dev, int port,
+			  const struct switchdev_obj_port_vlan *vlan,
+			  struct netlink_ext_ack *extack)
+{
+	u32 vlan_table[3];
+	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+	int err;
+
+	err = ksz9477_get_vlan_table(dev, vlan->vid, vlan_table);
+	if (err) {
+		NL_SET_ERR_MSG_MOD(extack, "Failed to get vlan table");
+		return err;
+	}
+
+	vlan_table[0] = VLAN_VALID | (vlan->vid & VLAN_FID_M);
+	if (untagged)
+		vlan_table[1] |= BIT(port);
+	else
+		vlan_table[1] &= ~BIT(port);
+	vlan_table[1] &= ~(BIT(dev->cpu_port));
+
+	vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
+
+	err = ksz9477_set_vlan_table(dev, vlan->vid, vlan_table);
+	if (err) {
+		NL_SET_ERR_MSG_MOD(extack, "Failed to set vlan table");
+		return err;
+	}
+
+	/* change PVID */
+	if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
+		ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vlan->vid);
+
+	return 0;
+}
+
+int ksz9477_port_vlan_del(struct ksz_device *dev, int port,
+			  const struct switchdev_obj_port_vlan *vlan)
+{
+	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+	u32 vlan_table[3];
+	u16 pvid;
+
+	ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
+	pvid = pvid & 0xFFF;
+
+	if (ksz9477_get_vlan_table(dev, vlan->vid, vlan_table)) {
+		dev_dbg(dev->dev, "Failed to get vlan table\n");
+		return -ETIMEDOUT;
+	}
+
+	vlan_table[2] &= ~BIT(port);
+
+	if (pvid == vlan->vid)
+		pvid = 1;
+
+	if (untagged)
+		vlan_table[1] &= ~BIT(port);
+
+	if (ksz9477_set_vlan_table(dev, vlan->vid, vlan_table)) {
+		dev_dbg(dev->dev, "Failed to set vlan table\n");
+		return -ETIMEDOUT;
+	}
+
+	ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
+
+	return 0;
+}
+
+int ksz9477_fdb_add(struct ksz_device *dev, int port,
+		    const unsigned char *addr, u16 vid, struct dsa_db db)
+{
+	u32 alu_table[4];
+	u32 data;
+	int ret = 0;
+
+	mutex_lock(&dev->alu_mutex);
+
+	/* find any entry with mac & vid */
+	data = vid << ALU_FID_INDEX_S;
+	data |= ((addr[0] << 8) | addr[1]);
+	ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+	data = ((addr[2] << 24) | (addr[3] << 16));
+	data |= ((addr[4] << 8) | addr[5]);
+	ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+	/* start read operation */
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_ready(dev);
+	if (ret) {
+		dev_dbg(dev->dev, "Failed to read ALU\n");
+		goto exit;
+	}
+
+	/* read ALU entry */
+	ksz9477_read_table(dev, alu_table);
+
+	/* update ALU entry */
+	alu_table[0] = ALU_V_STATIC_VALID;
+	alu_table[1] |= BIT(port);
+	if (vid)
+		alu_table[1] |= ALU_V_USE_FID;
+	alu_table[2] = (vid << ALU_V_FID_S);
+	alu_table[2] |= ((addr[0] << 8) | addr[1]);
+	alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
+	alu_table[3] |= ((addr[4] << 8) | addr[5]);
+
+	ksz9477_write_table(dev, alu_table);
+
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_ready(dev);
+	if (ret)
+		dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+int ksz9477_fdb_del(struct ksz_device *dev, int port,
+		    const unsigned char *addr, u16 vid, struct dsa_db db)
+{
+	u32 alu_table[4];
+	u32 data;
+	int ret = 0;
+
+	mutex_lock(&dev->alu_mutex);
+
+	/* read any entry with mac & vid */
+	data = vid << ALU_FID_INDEX_S;
+	data |= ((addr[0] << 8) | addr[1]);
+	ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+	data = ((addr[2] << 24) | (addr[3] << 16));
+	data |= ((addr[4] << 8) | addr[5]);
+	ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+	/* start read operation */
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_ready(dev);
+	if (ret) {
+		dev_dbg(dev->dev, "Failed to read ALU\n");
+		goto exit;
+	}
+
+	ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
+	if (alu_table[0] & ALU_V_STATIC_VALID) {
+		ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
+		ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
+		ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
+
+		/* clear forwarding port */
+		alu_table[1] &= ~BIT(port);
+
+		/* if there is no port to forward, clear table */
+		if ((alu_table[1] & ALU_V_PORT_MAP) == 0) {
+			alu_table[0] = 0;
+			alu_table[1] = 0;
+			alu_table[2] = 0;
+			alu_table[3] = 0;
+		}
+	} else {
+		alu_table[0] = 0;
+		alu_table[1] = 0;
+		alu_table[2] = 0;
+		alu_table[3] = 0;
+	}
+
+	ksz9477_write_table(dev, alu_table);
+
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_ready(dev);
+	if (ret)
+		dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+static void ksz9477_convert_alu(struct alu_struct *alu, u32 *alu_table)
+{
+	alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
+	alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
+	alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
+	alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
+			ALU_V_PRIO_AGE_CNT_M;
+	alu->mstp = alu_table[0] & ALU_V_MSTP_M;
+
+	alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
+	alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
+	alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
+
+	alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
+
+	alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
+	alu->mac[1] = alu_table[2] & 0xFF;
+	alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
+	alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
+	alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
+	alu->mac[5] = alu_table[3] & 0xFF;
+}
+
+int ksz9477_fdb_dump(struct ksz_device *dev, int port,
+		     dsa_fdb_dump_cb_t *cb, void *data)
+{
+	int ret = 0;
+	u32 ksz_data;
+	u32 alu_table[4];
+	struct alu_struct alu;
+	int timeout;
+
+	mutex_lock(&dev->alu_mutex);
+
+	/* start ALU search */
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
+
+	do {
+		timeout = 1000;
+		do {
+			ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data);
+			if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START))
+				break;
+			usleep_range(1, 10);
+		} while (timeout-- > 0);
+
+		if (!timeout) {
+			dev_dbg(dev->dev, "Failed to search ALU\n");
+			ret = -ETIMEDOUT;
+			goto exit;
+		}
+
+		if (!(ksz_data & ALU_VALID))
+			continue;
+
+		/* read ALU table */
+		ksz9477_read_table(dev, alu_table);
+
+		ksz9477_convert_alu(&alu, alu_table);
+
+		if (alu.port_forward & BIT(port)) {
+			ret = cb(alu.mac, alu.fid, alu.is_static, data);
+			if (ret)
+				goto exit;
+		}
+	} while (ksz_data & ALU_START);
+
+exit:
+
+	/* stop ALU search */
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
+
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+int ksz9477_mdb_add(struct ksz_device *dev, int port,
+		    const struct switchdev_obj_port_mdb *mdb, struct dsa_db db)
+{
+	u32 static_table[4];
+	const u8 *shifts;
+	const u32 *masks;
+	u32 data;
+	int index;
+	u32 mac_hi, mac_lo;
+	int err = 0;
+
+	shifts = dev->info->shifts;
+	masks = dev->info->masks;
+
+	mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+	mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+	mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+	mutex_lock(&dev->alu_mutex);
+
+	for (index = 0; index < dev->info->num_statics; index++) {
+		/* find empty slot first */
+		data = (index << shifts[ALU_STAT_INDEX]) |
+			masks[ALU_STAT_READ] | ALU_STAT_START;
+		ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+		/* wait to be finished */
+		err = ksz9477_wait_alu_sta_ready(dev);
+		if (err) {
+			dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+			goto exit;
+		}
+
+		/* read ALU static table */
+		ksz9477_read_table(dev, static_table);
+
+		if (static_table[0] & ALU_V_STATIC_VALID) {
+			/* check this has same vid & mac address */
+			if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
+			    ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+			    static_table[3] == mac_lo) {
+				/* found matching one */
+				break;
+			}
+		} else {
+			/* found empty one */
+			break;
+		}
+	}
+
+	/* no available entry */
+	if (index == dev->info->num_statics) {
+		err = -ENOSPC;
+		goto exit;
+	}
+
+	/* add entry */
+	static_table[0] = ALU_V_STATIC_VALID;
+	static_table[1] |= BIT(port);
+	if (mdb->vid)
+		static_table[1] |= ALU_V_USE_FID;
+	static_table[2] = (mdb->vid << ALU_V_FID_S);
+	static_table[2] |= mac_hi;
+	static_table[3] = mac_lo;
+
+	ksz9477_write_table(dev, static_table);
+
+	data = (index << shifts[ALU_STAT_INDEX]) | ALU_STAT_START;
+	ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+	/* wait to be finished */
+	if (ksz9477_wait_alu_sta_ready(dev))
+		dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+	return err;
+}
+
+int ksz9477_mdb_del(struct ksz_device *dev, int port,
+		    const struct switchdev_obj_port_mdb *mdb, struct dsa_db db)
+{
+	u32 static_table[4];
+	const u8 *shifts;
+	const u32 *masks;
+	u32 data;
+	int index;
+	int ret = 0;
+	u32 mac_hi, mac_lo;
+
+	shifts = dev->info->shifts;
+	masks = dev->info->masks;
+
+	mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+	mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+	mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+	mutex_lock(&dev->alu_mutex);
+
+	for (index = 0; index < dev->info->num_statics; index++) {
+		/* find empty slot first */
+		data = (index << shifts[ALU_STAT_INDEX]) |
+			masks[ALU_STAT_READ] | ALU_STAT_START;
+		ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+		/* wait to be finished */
+		ret = ksz9477_wait_alu_sta_ready(dev);
+		if (ret) {
+			dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+			goto exit;
+		}
+
+		/* read ALU static table */
+		ksz9477_read_table(dev, static_table);
+
+		if (static_table[0] & ALU_V_STATIC_VALID) {
+			/* check this has same vid & mac address */
+
+			if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
+			    ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+			    static_table[3] == mac_lo) {
+				/* found matching one */
+				break;
+			}
+		}
+	}
+
+	/* no available entry */
+	if (index == dev->info->num_statics)
+		goto exit;
+
+	/* clear port */
+	static_table[1] &= ~BIT(port);
+
+	if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
+		/* delete entry */
+		static_table[0] = 0;
+		static_table[1] = 0;
+		static_table[2] = 0;
+		static_table[3] = 0;
+	}
+
+	ksz9477_write_table(dev, static_table);
+
+	data = (index << shifts[ALU_STAT_INDEX]) | ALU_STAT_START;
+	ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_sta_ready(dev);
+	if (ret)
+		dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+int ksz9477_port_mirror_add(struct ksz_device *dev, int port,
+			    struct dsa_mall_mirror_tc_entry *mirror,
+			    bool ingress, struct netlink_ext_ack *extack)
+{
+	u8 data;
+	int p;
+
+	/* Limit to one sniffer port
+	 * Check if any of the port is already set for sniffing
+	 * If yes, instruct the user to remove the previous entry & exit
+	 */
+	for (p = 0; p < dev->info->port_cnt; p++) {
+		/* Skip the current sniffing port */
+		if (p == mirror->to_local_port)
+			continue;
+
+		ksz_pread8(dev, p, P_MIRROR_CTRL, &data);
+
+		if (data & PORT_MIRROR_SNIFFER) {
+			NL_SET_ERR_MSG_MOD(extack,
+					   "Sniffer port is already configured, delete existing rules & retry");
+			return -EBUSY;
+		}
+	}
+
+	if (ingress)
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
+	else
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
+
+	/* configure mirror port */
+	ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+		     PORT_MIRROR_SNIFFER, true);
+
+	ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+
+	return 0;
+}
+
+void ksz9477_port_mirror_del(struct ksz_device *dev, int port,
+			     struct dsa_mall_mirror_tc_entry *mirror)
+{
+	bool in_use = false;
+	u8 data;
+	int p;
+
+	if (mirror->ingress)
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
+	else
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
+
+
+	/* Check if any of the port is still referring to sniffer port */
+	for (p = 0; p < dev->info->port_cnt; p++) {
+		ksz_pread8(dev, p, P_MIRROR_CTRL, &data);
+
+		if ((data & (PORT_MIRROR_RX | PORT_MIRROR_TX))) {
+			in_use = true;
+			break;
+		}
+	}
+
+	/* delete sniffing if there are no other mirroring rules */
+	if (!in_use)
+		ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+			     PORT_MIRROR_SNIFFER, false);
+}
+
+static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port)
+{
+	phy_interface_t interface;
+	bool gbit;
+
+	if (dev->info->internal_phy[port])
+		return PHY_INTERFACE_MODE_NA;
+
+	gbit = ksz_get_gbit(dev, port);
+
+	interface = ksz_get_xmii(dev, port, gbit);
+
+	return interface;
+}
+
+static void ksz9477_port_mmd_write(struct ksz_device *dev, int port,
+				   u8 dev_addr, u16 reg_addr, u16 val)
+{
+	ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP,
+		     MMD_SETUP(PORT_MMD_OP_INDEX, dev_addr));
+	ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, reg_addr);
+	ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP,
+		     MMD_SETUP(PORT_MMD_OP_DATA_NO_INCR, dev_addr));
+	ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, val);
+}
+
+static void ksz9477_phy_errata_setup(struct ksz_device *dev, int port)
+{
+	/* Apply PHY settings to address errata listed in
+	 * KSZ9477, KSZ9897, KSZ9896, KSZ9567, KSZ8565
+	 * Silicon Errata and Data Sheet Clarification documents:
+	 *
+	 * Register settings are needed to improve PHY receive performance
+	 */
+	ksz9477_port_mmd_write(dev, port, 0x01, 0x6f, 0xdd0b);
+	ksz9477_port_mmd_write(dev, port, 0x01, 0x8f, 0x6032);
+	ksz9477_port_mmd_write(dev, port, 0x01, 0x9d, 0x248c);
+	ksz9477_port_mmd_write(dev, port, 0x01, 0x75, 0x0060);
+	ksz9477_port_mmd_write(dev, port, 0x01, 0xd3, 0x7777);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x06, 0x3008);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x08, 0x2001);
+
+	/* Transmit waveform amplitude can be improved
+	 * (1000BASE-T, 100BASE-TX, 10BASE-Te)
+	 */
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x04, 0x00d0);
+
+	/* Energy Efficient Ethernet (EEE) feature select must
+	 * be manually disabled (except on KSZ8565 which is 100Mbit)
+	 */
+	if (dev->info->gbit_capable[port])
+		ksz9477_port_mmd_write(dev, port, 0x07, 0x3c, 0x0000);
+
+	/* Register settings are required to meet data sheet
+	 * supply current specifications
+	 */
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x13, 0x6eff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x14, 0xe6ff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x15, 0x6eff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x16, 0xe6ff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x17, 0x00ff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x18, 0x43ff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x19, 0xc3ff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1a, 0x6fff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1b, 0x07ff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1c, 0x0fff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1d, 0xe7ff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x1e, 0xefff);
+	ksz9477_port_mmd_write(dev, port, 0x1c, 0x20, 0xeeee);
+}
+
+void ksz9477_get_caps(struct ksz_device *dev, int port,
+		      struct phylink_config *config)
+{
+	config->mac_capabilities = MAC_10 | MAC_100 | MAC_ASYM_PAUSE |
+				   MAC_SYM_PAUSE;
+
+	if (dev->info->gbit_capable[port])
+		config->mac_capabilities |= MAC_1000FD;
+}
+
+int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs)
+{
+	u32 secs = msecs / 1000;
+	u8 value;
+	u8 data;
+	int ret;
+
+	value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs);
+
+	ret = ksz_write8(dev, REG_SW_LUE_CTRL_3, value);
+	if (ret < 0)
+		return ret;
+
+	data = FIELD_GET(SW_AGE_PERIOD_10_8_M, secs);
+
+	ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &value);
+	if (ret < 0)
+		return ret;
+
+	value &= ~SW_AGE_CNT_M;
+	value |= FIELD_PREP(SW_AGE_CNT_M, data);
+
+	return ksz_write8(dev, REG_SW_LUE_CTRL_0, value);
+}
+
+void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+	struct dsa_switch *ds = dev->ds;
+	u16 data16;
+	u8 member;
+
+	/* enable tag tail for host port */
+	if (cpu_port)
+		ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
+			     true);
+
+	ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
+
+	/* set back pressure */
+	ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true);
+
+	/* enable broadcast storm limit */
+	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
+
+	/* disable DiffServ priority */
+	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
+
+	/* replace priority */
+	ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
+		     false);
+	ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
+			   MTI_PVID_REPLACE, false);
+
+	/* enable 802.1p priority */
+	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
+
+	if (dev->info->internal_phy[port]) {
+		/* do not force flow control */
+		ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
+			     PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
+			     false);
+
+		if (dev->info->phy_errata_9477)
+			ksz9477_phy_errata_setup(dev, port);
+	} else {
+		/* force flow control */
+		ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
+			     PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
+			     true);
+	}
+
+	if (cpu_port)
+		member = dsa_user_ports(ds);
+	else
+		member = BIT(dsa_upstream_port(ds, port));
+
+	ksz9477_cfg_port_member(dev, port, member);
+
+	/* clear pending interrupts */
+	if (dev->info->internal_phy[port])
+		ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
+}
+
+void ksz9477_config_cpu_port(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port *p;
+	int i;
+
+	for (i = 0; i < dev->info->port_cnt; i++) {
+		if (dsa_is_cpu_port(ds, i) &&
+		    (dev->info->cpu_ports & (1 << i))) {
+			phy_interface_t interface;
+			const char *prev_msg;
+			const char *prev_mode;
+
+			dev->cpu_port = i;
+			p = &dev->ports[i];
+
+			/* Read from XMII register to determine host port
+			 * interface.  If set specifically in device tree
+			 * note the difference to help debugging.
+			 */
+			interface = ksz9477_get_interface(dev, i);
+			if (!p->interface) {
+				if (dev->compat_interface) {
+					dev_warn(dev->dev,
+						 "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. "
+						 "Please update your device tree.\n",
+						 i);
+					p->interface = dev->compat_interface;
+				} else {
+					p->interface = interface;
+				}
+			}
+			if (interface && interface != p->interface) {
+				prev_msg = " instead of ";
+				prev_mode = phy_modes(interface);
+			} else {
+				prev_msg = "";
+				prev_mode = "";
+			}
+			dev_info(dev->dev,
+				 "Port%d: using phy mode %s%s%s\n",
+				 i,
+				 phy_modes(p->interface),
+				 prev_msg,
+				 prev_mode);
+
+			/* enable cpu port */
+			ksz9477_port_setup(dev, i, true);
+		}
+	}
+
+	for (i = 0; i < dev->info->port_cnt; i++) {
+		if (i == dev->cpu_port)
+			continue;
+		ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED);
+	}
+}
+
+int ksz9477_enable_stp_addr(struct ksz_device *dev)
+{
+	const u32 *masks;
+	u32 data;
+	int ret;
+
+	masks = dev->info->masks;
+
+	/* Enable Reserved multicast table */
+	ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_RESV_MCAST_ENABLE, true);
+
+	/* Set the Override bit for forwarding BPDU packet to CPU */
+	ret = ksz_write32(dev, REG_SW_ALU_VAL_B,
+			  ALU_V_OVERRIDE | BIT(dev->cpu_port));
+	if (ret < 0)
+		return ret;
+
+	data = ALU_STAT_START | ALU_RESV_MCAST_ADDR | masks[ALU_STAT_WRITE];
+
+	ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+	if (ret < 0)
+		return ret;
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_sta_ready(dev);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to update Reserved Multicast table\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int ksz9477_setup(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	int ret = 0;
+
+	/* Required for port partitioning. */
+	ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
+		      true);
+
+	/* Do not work correctly with tail tagging. */
+	ksz_cfg(dev, REG_SW_MAC_CTRL_0, SW_CHECK_LENGTH, false);
+
+	/* Enable REG_SW_MTU__2 reg by setting SW_JUMBO_PACKET */
+	ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_JUMBO_PACKET, true);
+
+	/* Now we can configure default MTU value */
+	ret = regmap_update_bits(dev->regmap[1], REG_SW_MTU__2, REG_SW_MTU_MASK,
+				 VLAN_ETH_FRAME_LEN + ETH_FCS_LEN);
+	if (ret)
+		return ret;
+
+	/* queue based egress rate limit */
+	ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
+
+	/* enable global MIB counter freeze function */
+	ksz_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true);
+
+	return 0;
+}
+
+u32 ksz9477_get_port_addr(int port, int offset)
+{
+	return PORT_CTRL_ADDR(port, offset);
+}
+
+int ksz9477_switch_init(struct ksz_device *dev)
+{
+	u8 data8;
+	int ret;
+
+	dev->port_mask = (1 << dev->info->port_cnt) - 1;
+
+	/* turn off SPI DO Edge select */
+	ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
+	if (ret)
+		return ret;
+
+	data8 &= ~SPI_AUTO_EDGE_DETECTION;
+	ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+void ksz9477_switch_exit(struct ksz_device *dev)
+{
+	ksz9477_reset_switch(dev);
+}
+
+MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch DSA Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/microchip/ksz9477.h b/drivers/net/dsa/microchip/ksz9477.h
new file mode 100644
index 000000000..00862c4cf
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz9477.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Microchip KSZ9477 series Header file
+ *
+ * Copyright (C) 2017-2022 Microchip Technology Inc.
+ */
+
+#ifndef __KSZ9477_H
+#define __KSZ9477_H
+
+#include <net/dsa.h>
+#include "ksz_common.h"
+
+int ksz9477_setup(struct dsa_switch *ds);
+u32 ksz9477_get_port_addr(int port, int offset);
+void ksz9477_cfg_port_member(struct ksz_device *dev, int port, u8 member);
+void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port);
+void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port);
+int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs);
+int ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data);
+int ksz9477_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val);
+void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt);
+void ksz9477_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
+		       u64 *dropped, u64 *cnt);
+void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze);
+void ksz9477_port_init_cnt(struct ksz_device *dev, int port);
+int ksz9477_port_vlan_filtering(struct ksz_device *dev, int port,
+				bool flag, struct netlink_ext_ack *extack);
+int ksz9477_port_vlan_add(struct ksz_device *dev, int port,
+			  const struct switchdev_obj_port_vlan *vlan,
+			  struct netlink_ext_ack *extack);
+int ksz9477_port_vlan_del(struct ksz_device *dev, int port,
+			  const struct switchdev_obj_port_vlan *vlan);
+int ksz9477_port_mirror_add(struct ksz_device *dev, int port,
+			    struct dsa_mall_mirror_tc_entry *mirror,
+			    bool ingress, struct netlink_ext_ack *extack);
+void ksz9477_port_mirror_del(struct ksz_device *dev, int port,
+			     struct dsa_mall_mirror_tc_entry *mirror);
+int ksz9477_get_stp_reg(void);
+void ksz9477_get_caps(struct ksz_device *dev, int port,
+		      struct phylink_config *config);
+int ksz9477_fdb_dump(struct ksz_device *dev, int port,
+		     dsa_fdb_dump_cb_t *cb, void *data);
+int ksz9477_fdb_add(struct ksz_device *dev, int port,
+		    const unsigned char *addr, u16 vid, struct dsa_db db);
+int ksz9477_fdb_del(struct ksz_device *dev, int port,
+		    const unsigned char *addr, u16 vid, struct dsa_db db);
+int ksz9477_mdb_add(struct ksz_device *dev, int port,
+		    const struct switchdev_obj_port_mdb *mdb, struct dsa_db db);
+int ksz9477_mdb_del(struct ksz_device *dev, int port,
+		    const struct switchdev_obj_port_mdb *mdb, struct dsa_db db);
+int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu);
+int ksz9477_max_mtu(struct ksz_device *dev, int port);
+void ksz9477_config_cpu_port(struct dsa_switch *ds);
+int ksz9477_enable_stp_addr(struct ksz_device *dev);
+int ksz9477_reset_switch(struct ksz_device *dev);
+int ksz9477_dsa_init(struct ksz_device *dev);
+int ksz9477_switch_init(struct ksz_device *dev);
+void ksz9477_switch_exit(struct ksz_device *dev);
+
+#endif
diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c
new file mode 100644
index 000000000..aae1dadef
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz9477_i2c.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip KSZ9477 series register access through I2C
+ *
+ * Copyright (C) 2018-2019 Microchip Technology Inc.
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "ksz_common.h"
+
+KSZ_REGMAP_TABLE(ksz9477, not_used, 16, 0, 0);
+
+static int ksz9477_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *i2c_id)
+{
+	struct regmap_config rc;
+	struct ksz_device *dev;
+	int i, ret;
+
+	dev = ksz_switch_alloc(&i2c->dev, i2c);
+	if (!dev)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(ksz9477_regmap_config); i++) {
+		rc = ksz9477_regmap_config[i];
+		rc.lock_arg = &dev->regmap_mutex;
+		dev->regmap[i] = devm_regmap_init_i2c(i2c, &rc);
+		if (IS_ERR(dev->regmap[i])) {
+			ret = PTR_ERR(dev->regmap[i]);
+			dev_err(&i2c->dev,
+				"Failed to initialize regmap%i: %d\n",
+				ksz9477_regmap_config[i].val_bits, ret);
+			return ret;
+		}
+	}
+
+	if (i2c->dev.platform_data)
+		dev->pdata = i2c->dev.platform_data;
+
+	ret = ksz_switch_register(dev);
+
+	/* Main DSA driver may not be started yet. */
+	if (ret)
+		return ret;
+
+	i2c_set_clientdata(i2c, dev);
+
+	return 0;
+}
+
+static void ksz9477_i2c_remove(struct i2c_client *i2c)
+{
+	struct ksz_device *dev = i2c_get_clientdata(i2c);
+
+	if (dev)
+		ksz_switch_remove(dev);
+}
+
+static void ksz9477_i2c_shutdown(struct i2c_client *i2c)
+{
+	struct ksz_device *dev = i2c_get_clientdata(i2c);
+
+	if (!dev)
+		return;
+
+	if (dev->dev_ops->reset)
+		dev->dev_ops->reset(dev);
+
+	dsa_switch_shutdown(dev->ds);
+
+	i2c_set_clientdata(i2c, NULL);
+}
+
+static const struct i2c_device_id ksz9477_i2c_id[] = {
+	{ "ksz9477-switch", 0 },
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, ksz9477_i2c_id);
+
+static const struct of_device_id ksz9477_dt_ids[] = {
+	{
+		.compatible = "microchip,ksz9477",
+		.data = &ksz_switch_chips[KSZ9477]
+	},
+	{
+		.compatible = "microchip,ksz9896",
+		.data = &ksz_switch_chips[KSZ9896]
+	},
+	{
+		.compatible = "microchip,ksz9897",
+		.data = &ksz_switch_chips[KSZ9897]
+	},
+	{
+		.compatible = "microchip,ksz9893",
+		.data = &ksz_switch_chips[KSZ9893]
+	},
+	{
+		.compatible = "microchip,ksz9563",
+		.data = &ksz_switch_chips[KSZ9893]
+	},
+	{
+		.compatible = "microchip,ksz8563",
+		.data = &ksz_switch_chips[KSZ8563]
+	},
+	{
+		.compatible = "microchip,ksz9567",
+		.data = &ksz_switch_chips[KSZ9567]
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ksz9477_dt_ids);
+
+static struct i2c_driver ksz9477_i2c_driver = {
+	.driver = {
+		.name	= "ksz9477-switch",
+		.of_match_table = of_match_ptr(ksz9477_dt_ids),
+	},
+	.probe	= ksz9477_i2c_probe,
+	.remove	= ksz9477_i2c_remove,
+	.shutdown = ksz9477_i2c_shutdown,
+	.id_table = ksz9477_i2c_id,
+};
+
+module_i2c_driver(ksz9477_i2c_driver);
+
+MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch I2C access Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h
new file mode 100644
index 000000000..53c68d286
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz9477_reg.h
@@ -0,0 +1,1620 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Microchip KSZ9477 register definitions
+ *
+ * Copyright (C) 2017-2018 Microchip Technology Inc.
+ */
+
+#ifndef __KSZ9477_REGS_H
+#define __KSZ9477_REGS_H
+
+#define KS_PRIO_M			0x7
+#define KS_PRIO_S			4
+
+/* 0 - Operation */
+#define REG_CHIP_ID0__1			0x0000
+
+#define REG_CHIP_ID1__1			0x0001
+
+#define FAMILY_ID			0x95
+#define FAMILY_ID_94			0x94
+#define FAMILY_ID_95			0x95
+#define FAMILY_ID_85			0x85
+#define FAMILY_ID_98			0x98
+#define FAMILY_ID_88			0x88
+
+#define REG_CHIP_ID2__1			0x0002
+
+#define CHIP_ID_66			0x66
+#define CHIP_ID_67			0x67
+#define CHIP_ID_77			0x77
+#define CHIP_ID_93			0x93
+#define CHIP_ID_96			0x96
+#define CHIP_ID_97			0x97
+
+#define REG_CHIP_ID3__1			0x0003
+
+#define SWITCH_REVISION_M		0x0F
+#define SWITCH_REVISION_S		4
+#define SWITCH_RESET			0x01
+
+#define REG_SW_PME_CTRL			0x0006
+
+#define PME_ENABLE			BIT(1)
+#define PME_POLARITY			BIT(0)
+
+#define REG_GLOBAL_OPTIONS		0x000F
+
+#define SW_GIGABIT_ABLE			BIT(6)
+#define SW_REDUNDANCY_ABLE		BIT(5)
+#define SW_AVB_ABLE			BIT(4)
+#define SW_9567_RL_5_2			0xC
+#define SW_9477_SL_5_2			0xD
+
+#define SW_9896_GL_5_1			0xB
+#define SW_9896_RL_5_1			0x8
+#define SW_9896_SL_5_1			0x9
+
+#define SW_9895_GL_4_1			0x7
+#define SW_9895_RL_4_1			0x4
+#define SW_9895_SL_4_1			0x5
+
+#define SW_9896_RL_4_2			0x6
+
+#define SW_9893_RL_2_1			0x0
+#define SW_9893_SL_2_1			0x1
+#define SW_9893_GL_2_1			0x3
+
+#define SW_QW_ABLE			BIT(5)
+#define SW_9893_RN_2_1			0xC
+
+#define REG_SW_INT_STATUS__4		0x0010
+#define REG_SW_INT_MASK__4		0x0014
+
+#define LUE_INT				BIT(31)
+#define TRIG_TS_INT			BIT(30)
+#define APB_TIMEOUT_INT			BIT(29)
+
+#define SWITCH_INT_MASK			(TRIG_TS_INT | APB_TIMEOUT_INT)
+
+#define REG_SW_PORT_INT_STATUS__4	0x0018
+#define REG_SW_PORT_INT_MASK__4		0x001C
+#define REG_SW_PHY_INT_STATUS		0x0020
+#define REG_SW_PHY_INT_ENABLE		0x0024
+
+/* 1 - Global */
+#define REG_SW_GLOBAL_SERIAL_CTRL_0	0x0100
+#define SW_SPARE_REG_2			BIT(7)
+#define SW_SPARE_REG_1			BIT(6)
+#define SW_SPARE_REG_0			BIT(5)
+#define SW_BIG_ENDIAN			BIT(4)
+#define SPI_AUTO_EDGE_DETECTION		BIT(1)
+#define SPI_CLOCK_OUT_RISING_EDGE	BIT(0)
+
+#define REG_SW_GLOBAL_OUTPUT_CTRL__1	0x0103
+#define SW_ENABLE_REFCLKO		BIT(1)
+#define SW_REFCLKO_IS_125MHZ		BIT(0)
+
+#define REG_SW_IBA__4			0x0104
+
+#define SW_IBA_ENABLE			BIT(31)
+#define SW_IBA_DA_MATCH			BIT(30)
+#define SW_IBA_INIT			BIT(29)
+#define SW_IBA_QID_M			0xF
+#define SW_IBA_QID_S			22
+#define SW_IBA_PORT_M			0x2F
+#define SW_IBA_PORT_S			16
+#define SW_IBA_FRAME_TPID_M		0xFFFF
+
+#define REG_SW_APB_TIMEOUT_ADDR__4	0x0108
+
+#define APB_TIMEOUT_ACKNOWLEDGE		BIT(31)
+
+#define REG_SW_IBA_SYNC__1		0x010C
+
+#define REG_SW_IO_STRENGTH__1		0x010D
+#define SW_DRIVE_STRENGTH_M		0x7
+#define SW_DRIVE_STRENGTH_2MA		0
+#define SW_DRIVE_STRENGTH_4MA		1
+#define SW_DRIVE_STRENGTH_8MA		2
+#define SW_DRIVE_STRENGTH_12MA		3
+#define SW_DRIVE_STRENGTH_16MA		4
+#define SW_DRIVE_STRENGTH_20MA		5
+#define SW_DRIVE_STRENGTH_24MA		6
+#define SW_DRIVE_STRENGTH_28MA		7
+#define SW_HI_SPEED_DRIVE_STRENGTH_S	4
+#define SW_LO_SPEED_DRIVE_STRENGTH_S	0
+
+#define REG_SW_IBA_STATUS__4		0x0110
+
+#define SW_IBA_REQ			BIT(31)
+#define SW_IBA_RESP			BIT(30)
+#define SW_IBA_DA_MISMATCH		BIT(14)
+#define SW_IBA_FMT_MISMATCH		BIT(13)
+#define SW_IBA_CODE_ERROR		BIT(12)
+#define SW_IBA_CMD_ERROR		BIT(11)
+#define SW_IBA_CMD_LOC_M		(BIT(6) - 1)
+
+#define REG_SW_IBA_STATES__4		0x0114
+
+#define SW_IBA_BUF_STATE_S		30
+#define SW_IBA_CMD_STATE_S		28
+#define SW_IBA_RESP_STATE_S		26
+#define SW_IBA_STATE_M			0x3
+#define SW_IBA_PACKET_SIZE_M		0x7F
+#define SW_IBA_PACKET_SIZE_S		16
+#define SW_IBA_FMT_ID_M			0xFFFF
+
+#define REG_SW_IBA_RESULT__4		0x0118
+
+#define SW_IBA_SIZE_S			24
+
+#define SW_IBA_RETRY_CNT_M		(BIT(5) - 1)
+
+/* 2 - PHY */
+#define REG_SW_POWER_MANAGEMENT_CTRL	0x0201
+
+#define SW_PLL_POWER_DOWN		BIT(5)
+#define SW_POWER_DOWN_MODE		0x3
+#define SW_ENERGY_DETECTION		1
+#define SW_SOFT_POWER_DOWN		2
+#define SW_POWER_SAVING			3
+
+/* 3 - Operation Control */
+#define REG_SW_OPERATION		0x0300
+
+#define SW_DOUBLE_TAG			BIT(7)
+#define SW_RESET			BIT(1)
+
+#define REG_SW_MAC_ADDR_0		0x0302
+#define REG_SW_MAC_ADDR_1		0x0303
+#define REG_SW_MAC_ADDR_2		0x0304
+#define REG_SW_MAC_ADDR_3		0x0305
+#define REG_SW_MAC_ADDR_4		0x0306
+#define REG_SW_MAC_ADDR_5		0x0307
+
+#define REG_SW_MTU__2			0x0308
+#define REG_SW_MTU_MASK			GENMASK(13, 0)
+
+#define REG_SW_ISP_TPID__2		0x030A
+
+#define REG_SW_HSR_TPID__2		0x030C
+
+#define REG_AVB_STRATEGY__2		0x030E
+
+#define SW_SHAPING_CREDIT_ACCT		BIT(1)
+#define SW_POLICING_CREDIT_ACCT		BIT(0)
+
+#define REG_SW_LUE_CTRL_0		0x0310
+
+#define SW_VLAN_ENABLE			BIT(7)
+#define SW_DROP_INVALID_VID		BIT(6)
+#define SW_AGE_CNT_M			GENMASK(5, 3)
+#define SW_AGE_CNT_S			3
+#define SW_AGE_PERIOD_10_8_M		GENMASK(10, 8)
+#define SW_RESV_MCAST_ENABLE		BIT(2)
+#define SW_HASH_OPTION_M		0x03
+#define SW_HASH_OPTION_CRC		1
+#define SW_HASH_OPTION_XOR		2
+#define SW_HASH_OPTION_DIRECT		3
+
+#define REG_SW_LUE_CTRL_1		0x0311
+
+#define UNICAST_LEARN_DISABLE		BIT(7)
+#define SW_SRC_ADDR_FILTER		BIT(6)
+#define SW_FLUSH_STP_TABLE		BIT(5)
+#define SW_FLUSH_MSTP_TABLE		BIT(4)
+#define SW_FWD_MCAST_SRC_ADDR		BIT(3)
+#define SW_AGING_ENABLE			BIT(2)
+#define SW_FAST_AGING			BIT(1)
+#define SW_LINK_AUTO_AGING		BIT(0)
+
+#define REG_SW_LUE_CTRL_2		0x0312
+
+#define SW_TRAP_DOUBLE_TAG		BIT(6)
+#define SW_EGRESS_VLAN_FILTER_DYN	BIT(5)
+#define SW_EGRESS_VLAN_FILTER_STA	BIT(4)
+#define SW_FLUSH_OPTION_M		0x3
+#define SW_FLUSH_OPTION_S		2
+#define SW_FLUSH_OPTION_DYN_MAC		1
+#define SW_FLUSH_OPTION_STA_MAC		2
+#define SW_FLUSH_OPTION_BOTH		3
+#define SW_PRIO_M			0x3
+#define SW_PRIO_DA			0
+#define SW_PRIO_SA			1
+#define SW_PRIO_HIGHEST_DA_SA		2
+#define SW_PRIO_LOWEST_DA_SA		3
+
+#define REG_SW_LUE_CTRL_3		0x0313
+#define SW_AGE_PERIOD_7_0_M		GENMASK(7, 0)
+
+#define REG_SW_LUE_INT_STATUS		0x0314
+#define REG_SW_LUE_INT_ENABLE		0x0315
+
+#define LEARN_FAIL_INT			BIT(2)
+#define ALMOST_FULL_INT			BIT(1)
+#define WRITE_FAIL_INT			BIT(0)
+
+#define REG_SW_LUE_INDEX_0__2		0x0316
+
+#define ENTRY_INDEX_M			0x0FFF
+
+#define REG_SW_LUE_INDEX_1__2		0x0318
+
+#define FAIL_INDEX_M			0x03FF
+
+#define REG_SW_LUE_INDEX_2__2		0x031A
+
+#define REG_SW_LUE_UNK_UCAST_CTRL__4	0x0320
+
+#define SW_UNK_UCAST_ENABLE		BIT(31)
+
+#define REG_SW_LUE_UNK_MCAST_CTRL__4	0x0324
+
+#define SW_UNK_MCAST_ENABLE		BIT(31)
+
+#define REG_SW_LUE_UNK_VID_CTRL__4	0x0328
+
+#define SW_UNK_VID_ENABLE		BIT(31)
+
+#define REG_SW_MAC_CTRL_0		0x0330
+
+#define SW_NEW_BACKOFF			BIT(7)
+#define SW_CHECK_LENGTH			BIT(3)
+#define SW_PAUSE_UNH_MODE		BIT(1)
+#define SW_AGGR_BACKOFF			BIT(0)
+
+#define REG_SW_MAC_CTRL_1		0x0331
+
+#define SW_BACK_PRESSURE		BIT(5)
+#define FAIR_FLOW_CTRL			BIT(4)
+#define NO_EXC_COLLISION_DROP		BIT(3)
+#define SW_JUMBO_PACKET			BIT(2)
+#define SW_LEGAL_PACKET_DISABLE		BIT(1)
+#define SW_PASS_SHORT_FRAME		BIT(0)
+
+#define REG_SW_MAC_CTRL_2		0x0332
+
+#define SW_REPLACE_VID			BIT(3)
+
+#define REG_SW_MAC_CTRL_3		0x0333
+
+#define REG_SW_MAC_CTRL_4		0x0334
+
+#define SW_PASS_PAUSE			BIT(3)
+
+#define REG_SW_MAC_CTRL_5		0x0335
+
+#define SW_OUT_RATE_LIMIT_QUEUE_BASED	BIT(3)
+
+#define REG_SW_MAC_CTRL_6		0x0336
+
+#define SW_MIB_COUNTER_FLUSH		BIT(7)
+#define SW_MIB_COUNTER_FREEZE		BIT(6)
+
+#define REG_SW_MAC_802_1P_MAP_0		0x0338
+#define REG_SW_MAC_802_1P_MAP_1		0x0339
+#define REG_SW_MAC_802_1P_MAP_2		0x033A
+#define REG_SW_MAC_802_1P_MAP_3		0x033B
+
+#define SW_802_1P_MAP_M			KS_PRIO_M
+#define SW_802_1P_MAP_S			KS_PRIO_S
+
+#define REG_SW_MAC_ISP_CTRL		0x033C
+
+#define REG_SW_MAC_TOS_CTRL		0x033E
+
+#define SW_TOS_DSCP_REMARK		BIT(1)
+#define SW_TOS_DSCP_REMAP		BIT(0)
+
+#define REG_SW_MAC_TOS_PRIO_0		0x0340
+#define REG_SW_MAC_TOS_PRIO_1		0x0341
+#define REG_SW_MAC_TOS_PRIO_2		0x0342
+#define REG_SW_MAC_TOS_PRIO_3		0x0343
+#define REG_SW_MAC_TOS_PRIO_4		0x0344
+#define REG_SW_MAC_TOS_PRIO_5		0x0345
+#define REG_SW_MAC_TOS_PRIO_6		0x0346
+#define REG_SW_MAC_TOS_PRIO_7		0x0347
+#define REG_SW_MAC_TOS_PRIO_8		0x0348
+#define REG_SW_MAC_TOS_PRIO_9		0x0349
+#define REG_SW_MAC_TOS_PRIO_10		0x034A
+#define REG_SW_MAC_TOS_PRIO_11		0x034B
+#define REG_SW_MAC_TOS_PRIO_12		0x034C
+#define REG_SW_MAC_TOS_PRIO_13		0x034D
+#define REG_SW_MAC_TOS_PRIO_14		0x034E
+#define REG_SW_MAC_TOS_PRIO_15		0x034F
+#define REG_SW_MAC_TOS_PRIO_16		0x0350
+#define REG_SW_MAC_TOS_PRIO_17		0x0351
+#define REG_SW_MAC_TOS_PRIO_18		0x0352
+#define REG_SW_MAC_TOS_PRIO_19		0x0353
+#define REG_SW_MAC_TOS_PRIO_20		0x0354
+#define REG_SW_MAC_TOS_PRIO_21		0x0355
+#define REG_SW_MAC_TOS_PRIO_22		0x0356
+#define REG_SW_MAC_TOS_PRIO_23		0x0357
+#define REG_SW_MAC_TOS_PRIO_24		0x0358
+#define REG_SW_MAC_TOS_PRIO_25		0x0359
+#define REG_SW_MAC_TOS_PRIO_26		0x035A
+#define REG_SW_MAC_TOS_PRIO_27		0x035B
+#define REG_SW_MAC_TOS_PRIO_28		0x035C
+#define REG_SW_MAC_TOS_PRIO_29		0x035D
+#define REG_SW_MAC_TOS_PRIO_30		0x035E
+#define REG_SW_MAC_TOS_PRIO_31		0x035F
+
+#define REG_SW_MRI_CTRL_0		0x0370
+
+#define SW_IGMP_SNOOP			BIT(6)
+#define SW_IPV6_MLD_OPTION		BIT(3)
+#define SW_IPV6_MLD_SNOOP		BIT(2)
+#define SW_MIRROR_RX_TX			BIT(0)
+
+#define REG_SW_CLASS_D_IP_CTRL__4	0x0374
+
+#define SW_CLASS_D_IP_ENABLE		BIT(31)
+
+#define REG_SW_MRI_CTRL_8		0x0378
+
+#define SW_NO_COLOR_S			6
+#define SW_RED_COLOR_S			4
+#define SW_YELLOW_COLOR_S		2
+#define SW_GREEN_COLOR_S		0
+#define SW_COLOR_M			0x3
+
+#define REG_SW_QM_CTRL__4		0x0390
+
+#define PRIO_SCHEME_SELECT_M		KS_PRIO_M
+#define PRIO_SCHEME_SELECT_S		6
+#define PRIO_MAP_3_HI			0
+#define PRIO_MAP_2_HI			2
+#define PRIO_MAP_0_LO			3
+#define UNICAST_VLAN_BOUNDARY		BIT(1)
+
+#define REG_SW_EEE_QM_CTRL__2		0x03C0
+
+#define REG_SW_EEE_TXQ_WAIT_TIME__2	0x03C2
+
+/* 4 - */
+#define REG_SW_VLAN_ENTRY__4		0x0400
+
+#define VLAN_VALID			BIT(31)
+#define VLAN_FORWARD_OPTION		BIT(27)
+#define VLAN_PRIO_M			KS_PRIO_M
+#define VLAN_PRIO_S			24
+#define VLAN_MSTP_M			0x7
+#define VLAN_MSTP_S			12
+#define VLAN_FID_M			0x7F
+
+#define REG_SW_VLAN_ENTRY_UNTAG__4	0x0404
+#define REG_SW_VLAN_ENTRY_PORTS__4	0x0408
+
+#define REG_SW_VLAN_ENTRY_INDEX__2	0x040C
+
+#define VLAN_INDEX_M			0x0FFF
+
+#define REG_SW_VLAN_CTRL		0x040E
+
+#define VLAN_START			BIT(7)
+#define VLAN_ACTION			0x3
+#define VLAN_WRITE			1
+#define VLAN_READ			2
+#define VLAN_CLEAR			3
+
+#define REG_SW_ALU_INDEX_0		0x0410
+
+#define ALU_FID_INDEX_S			16
+#define ALU_MAC_ADDR_HI			0xFFFF
+
+#define REG_SW_ALU_INDEX_1		0x0414
+
+#define ALU_DIRECT_INDEX_M		(BIT(12) - 1)
+
+#define REG_SW_ALU_CTRL__4		0x0418
+
+#define ALU_VALID_CNT_M			(BIT(14) - 1)
+#define ALU_VALID_CNT_S			16
+#define ALU_START			BIT(7)
+#define ALU_VALID			BIT(6)
+#define ALU_DIRECT			BIT(2)
+#define ALU_ACTION			0x3
+#define ALU_WRITE			1
+#define ALU_READ			2
+#define ALU_SEARCH			3
+
+#define REG_SW_ALU_STAT_CTRL__4		0x041C
+
+#define ALU_RESV_MCAST_INDEX_M		(BIT(6) - 1)
+#define ALU_STAT_START			BIT(7)
+#define ALU_RESV_MCAST_ADDR		BIT(1)
+
+#define REG_SW_ALU_VAL_A		0x0420
+
+#define ALU_V_STATIC_VALID		BIT(31)
+#define ALU_V_SRC_FILTER		BIT(30)
+#define ALU_V_DST_FILTER		BIT(29)
+#define ALU_V_PRIO_AGE_CNT_M		(BIT(3) - 1)
+#define ALU_V_PRIO_AGE_CNT_S		26
+#define ALU_V_MSTP_M			0x7
+
+#define REG_SW_ALU_VAL_B		0x0424
+
+#define ALU_V_OVERRIDE			BIT(31)
+#define ALU_V_USE_FID			BIT(30)
+#define ALU_V_PORT_MAP			(BIT(24) - 1)
+
+#define REG_SW_ALU_VAL_C		0x0428
+
+#define ALU_V_FID_M			(BIT(16) - 1)
+#define ALU_V_FID_S			16
+#define ALU_V_MAC_ADDR_HI		0xFFFF
+
+#define REG_SW_ALU_VAL_D		0x042C
+
+#define REG_HSR_ALU_INDEX_0		0x0440
+
+#define REG_HSR_ALU_INDEX_1		0x0444
+
+#define HSR_DST_MAC_INDEX_LO_S		16
+#define HSR_SRC_MAC_INDEX_HI		0xFFFF
+
+#define REG_HSR_ALU_INDEX_2		0x0448
+
+#define HSR_INDEX_MAX			BIT(9)
+#define HSR_DIRECT_INDEX_M		(HSR_INDEX_MAX - 1)
+
+#define REG_HSR_ALU_INDEX_3		0x044C
+
+#define HSR_PATH_INDEX_M		(BIT(4) - 1)
+
+#define REG_HSR_ALU_CTRL__4		0x0450
+
+#define HSR_VALID_CNT_M			(BIT(14) - 1)
+#define HSR_VALID_CNT_S			16
+#define HSR_START			BIT(7)
+#define HSR_VALID			BIT(6)
+#define HSR_SEARCH_END			BIT(5)
+#define HSR_DIRECT			BIT(2)
+#define HSR_ACTION			0x3
+#define HSR_WRITE			1
+#define HSR_READ			2
+#define HSR_SEARCH			3
+
+#define REG_HSR_ALU_VAL_A		0x0454
+
+#define HSR_V_STATIC_VALID		BIT(31)
+#define HSR_V_AGE_CNT_M			(BIT(3) - 1)
+#define HSR_V_AGE_CNT_S			26
+#define HSR_V_PATH_ID_M			(BIT(4) - 1)
+
+#define REG_HSR_ALU_VAL_B		0x0458
+
+#define REG_HSR_ALU_VAL_C		0x045C
+
+#define HSR_V_DST_MAC_ADDR_LO_S		16
+#define HSR_V_SRC_MAC_ADDR_HI		0xFFFF
+
+#define REG_HSR_ALU_VAL_D		0x0460
+
+#define REG_HSR_ALU_VAL_E		0x0464
+
+#define HSR_V_START_SEQ_1_S		16
+#define HSR_V_START_SEQ_2_S		0
+
+#define REG_HSR_ALU_VAL_F		0x0468
+
+#define HSR_V_EXP_SEQ_1_S		16
+#define HSR_V_EXP_SEQ_2_S		0
+
+#define REG_HSR_ALU_VAL_G		0x046C
+
+#define HSR_V_SEQ_CNT_1_S		16
+#define HSR_V_SEQ_CNT_2_S		0
+
+#define HSR_V_SEQ_M			(BIT(16) - 1)
+
+/* 5 - PTP Clock */
+#define REG_PTP_CLK_CTRL		0x0500
+
+#define PTP_STEP_ADJ			BIT(6)
+#define PTP_STEP_DIR			BIT(5)
+#define PTP_READ_TIME			BIT(4)
+#define PTP_LOAD_TIME			BIT(3)
+#define PTP_CLK_ADJ_ENABLE		BIT(2)
+#define PTP_CLK_ENABLE			BIT(1)
+#define PTP_CLK_RESET			BIT(0)
+
+#define REG_PTP_RTC_SUB_NANOSEC__2	0x0502
+
+#define PTP_RTC_SUB_NANOSEC_M		0x0007
+
+#define REG_PTP_RTC_NANOSEC		0x0504
+#define REG_PTP_RTC_NANOSEC_H		0x0504
+#define REG_PTP_RTC_NANOSEC_L		0x0506
+
+#define REG_PTP_RTC_SEC			0x0508
+#define REG_PTP_RTC_SEC_H		0x0508
+#define REG_PTP_RTC_SEC_L		0x050A
+
+#define REG_PTP_SUBNANOSEC_RATE		0x050C
+#define REG_PTP_SUBNANOSEC_RATE_H	0x050C
+
+#define PTP_RATE_DIR			BIT(31)
+#define PTP_TMP_RATE_ENABLE		BIT(30)
+
+#define REG_PTP_SUBNANOSEC_RATE_L	0x050E
+
+#define REG_PTP_RATE_DURATION		0x0510
+#define REG_PTP_RATE_DURATION_H		0x0510
+#define REG_PTP_RATE_DURATION_L		0x0512
+
+#define REG_PTP_MSG_CONF1		0x0514
+
+#define PTP_802_1AS			BIT(7)
+#define PTP_ENABLE			BIT(6)
+#define PTP_ETH_ENABLE			BIT(5)
+#define PTP_IPV4_UDP_ENABLE		BIT(4)
+#define PTP_IPV6_UDP_ENABLE		BIT(3)
+#define PTP_TC_P2P			BIT(2)
+#define PTP_MASTER			BIT(1)
+#define PTP_1STEP			BIT(0)
+
+#define REG_PTP_MSG_CONF2		0x0516
+
+#define PTP_UNICAST_ENABLE		BIT(12)
+#define PTP_ALTERNATE_MASTER		BIT(11)
+#define PTP_ALL_HIGH_PRIO		BIT(10)
+#define PTP_SYNC_CHECK			BIT(9)
+#define PTP_DELAY_CHECK			BIT(8)
+#define PTP_PDELAY_CHECK		BIT(7)
+#define PTP_DROP_SYNC_DELAY_REQ		BIT(5)
+#define PTP_DOMAIN_CHECK		BIT(4)
+#define PTP_UDP_CHECKSUM		BIT(2)
+
+#define REG_PTP_DOMAIN_VERSION		0x0518
+#define PTP_VERSION_M			0xFF00
+#define PTP_DOMAIN_M			0x00FF
+
+#define REG_PTP_UNIT_INDEX__4		0x0520
+
+#define PTP_UNIT_M			0xF
+
+#define PTP_GPIO_INDEX_S		16
+#define PTP_TSI_INDEX_S			8
+#define PTP_TOU_INDEX_S			0
+
+#define REG_PTP_TRIG_STATUS__4		0x0524
+
+#define TRIG_ERROR_S			16
+#define TRIG_DONE_S			0
+
+#define REG_PTP_INT_STATUS__4		0x0528
+
+#define TRIG_INT_S			16
+#define TS_INT_S			0
+
+#define TRIG_UNIT_M			0x7
+#define TS_UNIT_M			0x3
+
+#define REG_PTP_CTRL_STAT__4		0x052C
+
+#define GPIO_IN				BIT(7)
+#define GPIO_OUT			BIT(6)
+#define TS_INT_ENABLE			BIT(5)
+#define TRIG_ACTIVE			BIT(4)
+#define TRIG_ENABLE			BIT(3)
+#define TRIG_RESET			BIT(2)
+#define TS_ENABLE			BIT(1)
+#define TS_RESET			BIT(0)
+
+#define GPIO_CTRL_M			(GPIO_IN | GPIO_OUT)
+
+#define TRIG_CTRL_M			\
+	(TRIG_ACTIVE | TRIG_ENABLE | TRIG_RESET)
+
+#define TS_CTRL_M			\
+	(TS_INT_ENABLE | TS_ENABLE | TS_RESET)
+
+#define REG_TRIG_TARGET_NANOSEC		0x0530
+#define REG_TRIG_TARGET_SEC		0x0534
+
+#define REG_TRIG_CTRL__4		0x0538
+
+#define TRIG_CASCADE_ENABLE		BIT(31)
+#define TRIG_CASCADE_TAIL		BIT(30)
+#define TRIG_CASCADE_UPS_M		0xF
+#define TRIG_CASCADE_UPS_S		26
+#define TRIG_NOW			BIT(25)
+#define TRIG_NOTIFY			BIT(24)
+#define TRIG_EDGE			BIT(23)
+#define TRIG_PATTERN_S			20
+#define TRIG_PATTERN_M			0x7
+#define TRIG_NEG_EDGE			0
+#define TRIG_POS_EDGE			1
+#define TRIG_NEG_PULSE			2
+#define TRIG_POS_PULSE			3
+#define TRIG_NEG_PERIOD			4
+#define TRIG_POS_PERIOD			5
+#define TRIG_REG_OUTPUT			6
+#define TRIG_GPO_S			16
+#define TRIG_GPO_M			0xF
+#define TRIG_CASCADE_ITERATE_CNT_M	0xFFFF
+
+#define REG_TRIG_CYCLE_WIDTH		0x053C
+
+#define REG_TRIG_CYCLE_CNT		0x0540
+
+#define TRIG_CYCLE_CNT_M		0xFFFF
+#define TRIG_CYCLE_CNT_S		16
+#define TRIG_BIT_PATTERN_M		0xFFFF
+
+#define REG_TRIG_ITERATE_TIME		0x0544
+
+#define REG_TRIG_PULSE_WIDTH__4		0x0548
+
+#define TRIG_PULSE_WIDTH_M		0x00FFFFFF
+
+#define REG_TS_CTRL_STAT__4		0x0550
+
+#define TS_EVENT_DETECT_M		0xF
+#define TS_EVENT_DETECT_S		17
+#define TS_EVENT_OVERFLOW		BIT(16)
+#define TS_GPI_M			0xF
+#define TS_GPI_S			8
+#define TS_DETECT_RISE			BIT(7)
+#define TS_DETECT_FALL			BIT(6)
+#define TS_DETECT_S			6
+#define TS_CASCADE_TAIL			BIT(5)
+#define TS_CASCADE_UPS_M		0xF
+#define TS_CASCADE_UPS_S		1
+#define TS_CASCADE_ENABLE		BIT(0)
+
+#define DETECT_RISE			(TS_DETECT_RISE >> TS_DETECT_S)
+#define DETECT_FALL			(TS_DETECT_FALL >> TS_DETECT_S)
+
+#define REG_TS_EVENT_0_NANOSEC		0x0554
+#define REG_TS_EVENT_0_SEC		0x0558
+#define REG_TS_EVENT_0_SUB_NANOSEC	0x055C
+
+#define REG_TS_EVENT_1_NANOSEC		0x0560
+#define REG_TS_EVENT_1_SEC		0x0564
+#define REG_TS_EVENT_1_SUB_NANOSEC	0x0568
+
+#define REG_TS_EVENT_2_NANOSEC		0x056C
+#define REG_TS_EVENT_2_SEC		0x0570
+#define REG_TS_EVENT_2_SUB_NANOSEC	0x0574
+
+#define REG_TS_EVENT_3_NANOSEC		0x0578
+#define REG_TS_EVENT_3_SEC		0x057C
+#define REG_TS_EVENT_3_SUB_NANOSEC	0x0580
+
+#define REG_TS_EVENT_4_NANOSEC		0x0584
+#define REG_TS_EVENT_4_SEC		0x0588
+#define REG_TS_EVENT_4_SUB_NANOSEC	0x058C
+
+#define REG_TS_EVENT_5_NANOSEC		0x0590
+#define REG_TS_EVENT_5_SEC		0x0594
+#define REG_TS_EVENT_5_SUB_NANOSEC	0x0598
+
+#define REG_TS_EVENT_6_NANOSEC		0x059C
+#define REG_TS_EVENT_6_SEC		0x05A0
+#define REG_TS_EVENT_6_SUB_NANOSEC	0x05A4
+
+#define REG_TS_EVENT_7_NANOSEC		0x05A8
+#define REG_TS_EVENT_7_SEC		0x05AC
+#define REG_TS_EVENT_7_SUB_NANOSEC	0x05B0
+
+#define TS_EVENT_EDGE_M			0x1
+#define TS_EVENT_EDGE_S			30
+#define TS_EVENT_NANOSEC_M		(BIT(30) - 1)
+
+#define TS_EVENT_SUB_NANOSEC_M		0x7
+
+#define TS_EVENT_SAMPLE			\
+	(REG_TS_EVENT_1_NANOSEC - REG_TS_EVENT_0_NANOSEC)
+
+#define PORT_CTRL_ADDR(port, addr)	((addr) | (((port) + 1) << 12))
+
+#define REG_GLOBAL_RR_INDEX__1		0x0600
+
+/* DLR */
+#define REG_DLR_SRC_PORT__4		0x0604
+
+#define DLR_SRC_PORT_UNICAST		BIT(31)
+#define DLR_SRC_PORT_M			0x3
+#define DLR_SRC_PORT_BOTH		0
+#define DLR_SRC_PORT_EACH		1
+
+#define REG_DLR_IP_ADDR__4		0x0608
+
+#define REG_DLR_CTRL__1			0x0610
+
+#define DLR_RESET_SEQ_ID		BIT(3)
+#define DLR_BACKUP_AUTO_ON		BIT(2)
+#define DLR_BEACON_TX_ENABLE		BIT(1)
+#define DLR_ASSIST_ENABLE		BIT(0)
+
+#define REG_DLR_STATE__1		0x0611
+
+#define DLR_NODE_STATE_M		0x3
+#define DLR_NODE_STATE_S		1
+#define DLR_NODE_STATE_IDLE		0
+#define DLR_NODE_STATE_FAULT		1
+#define DLR_NODE_STATE_NORMAL		2
+#define DLR_RING_STATE_FAULT		0
+#define DLR_RING_STATE_NORMAL		1
+
+#define REG_DLR_PRECEDENCE__1		0x0612
+
+#define REG_DLR_BEACON_INTERVAL__4	0x0614
+
+#define REG_DLR_BEACON_TIMEOUT__4	0x0618
+
+#define REG_DLR_TIMEOUT_WINDOW__4	0x061C
+
+#define DLR_TIMEOUT_WINDOW_M		(BIT(22) - 1)
+
+#define REG_DLR_VLAN_ID__2		0x0620
+
+#define DLR_VLAN_ID_M			(BIT(12) - 1)
+
+#define REG_DLR_DEST_ADDR_0		0x0622
+#define REG_DLR_DEST_ADDR_1		0x0623
+#define REG_DLR_DEST_ADDR_2		0x0624
+#define REG_DLR_DEST_ADDR_3		0x0625
+#define REG_DLR_DEST_ADDR_4		0x0626
+#define REG_DLR_DEST_ADDR_5		0x0627
+
+#define REG_DLR_PORT_MAP__4		0x0628
+
+#define REG_DLR_CLASS__1		0x062C
+
+#define DLR_FRAME_QID_M			0x3
+
+/* HSR */
+#define REG_HSR_PORT_MAP__4		0x0640
+
+#define REG_HSR_ALU_CTRL_0__1		0x0644
+
+#define HSR_DUPLICATE_DISCARD		BIT(7)
+#define HSR_NODE_UNICAST		BIT(6)
+#define HSR_AGE_CNT_DEFAULT_M		0x7
+#define HSR_AGE_CNT_DEFAULT_S		3
+#define HSR_LEARN_MCAST_DISABLE		BIT(2)
+#define HSR_HASH_OPTION_M		0x3
+#define HSR_HASH_DISABLE		0
+#define HSR_HASH_UPPER_BITS		1
+#define HSR_HASH_LOWER_BITS		2
+#define HSR_HASH_XOR_BOTH_BITS		3
+
+#define REG_HSR_ALU_CTRL_1__1		0x0645
+
+#define HSR_LEARN_UCAST_DISABLE		BIT(7)
+#define HSR_FLUSH_TABLE			BIT(5)
+#define HSR_PROC_MCAST_SRC		BIT(3)
+#define HSR_AGING_ENABLE		BIT(2)
+
+#define REG_HSR_ALU_CTRL_2__2		0x0646
+
+#define REG_HSR_ALU_AGE_PERIOD__4	0x0648
+
+#define REG_HSR_ALU_INT_STATUS__1	0x064C
+#define REG_HSR_ALU_INT_MASK__1		0x064D
+
+#define HSR_WINDOW_OVERFLOW_INT		BIT(3)
+#define HSR_LEARN_FAIL_INT		BIT(2)
+#define HSR_ALMOST_FULL_INT		BIT(1)
+#define HSR_WRITE_FAIL_INT		BIT(0)
+
+#define REG_HSR_ALU_ENTRY_0__2		0x0650
+
+#define HSR_ENTRY_INDEX_M		(BIT(10) - 1)
+#define HSR_FAIL_INDEX_M		(BIT(8) - 1)
+
+#define REG_HSR_ALU_ENTRY_1__2		0x0652
+
+#define HSR_FAIL_LEARN_INDEX_M		(BIT(8) - 1)
+
+#define REG_HSR_ALU_ENTRY_3__2		0x0654
+
+#define HSR_CPU_ACCESS_ENTRY_INDEX_M	(BIT(8) - 1)
+
+/* 0 - Operation */
+#define REG_PORT_DEFAULT_VID		0x0000
+
+#define REG_PORT_CUSTOM_VID		0x0002
+#define REG_PORT_AVB_SR_1_VID		0x0004
+#define REG_PORT_AVB_SR_2_VID		0x0006
+
+#define REG_PORT_AVB_SR_1_TYPE		0x0008
+#define REG_PORT_AVB_SR_2_TYPE		0x000A
+
+#define REG_PORT_PME_STATUS		0x0013
+#define REG_PORT_PME_CTRL		0x0017
+
+#define PME_WOL_MAGICPKT		BIT(2)
+#define PME_WOL_LINKUP			BIT(1)
+#define PME_WOL_ENERGY			BIT(0)
+
+#define REG_PORT_INT_STATUS		0x001B
+#define REG_PORT_INT_MASK		0x001F
+
+#define PORT_SGMII_INT			BIT(3)
+#define PORT_PTP_INT			BIT(2)
+#define PORT_PHY_INT			BIT(1)
+#define PORT_ACL_INT			BIT(0)
+
+#define PORT_INT_MASK			\
+	(PORT_SGMII_INT | PORT_PTP_INT | PORT_PHY_INT | PORT_ACL_INT)
+
+#define REG_PORT_CTRL_0			0x0020
+
+#define PORT_MAC_LOOPBACK		BIT(7)
+#define PORT_FORCE_TX_FLOW_CTRL		BIT(4)
+#define PORT_FORCE_RX_FLOW_CTRL		BIT(3)
+#define PORT_TAIL_TAG_ENABLE		BIT(2)
+#define PORT_QUEUE_SPLIT_ENABLE		0x3
+
+#define REG_PORT_CTRL_1			0x0021
+
+#define PORT_SRP_ENABLE			0x3
+
+#define REG_PORT_STATUS_0		0x0030
+
+#define PORT_INTF_SPEED_M		0x3
+#define PORT_INTF_SPEED_S		3
+#define PORT_INTF_FULL_DUPLEX		BIT(2)
+#define PORT_TX_FLOW_CTRL		BIT(1)
+#define PORT_RX_FLOW_CTRL		BIT(0)
+
+#define REG_PORT_STATUS_1		0x0034
+
+/* 1 - PHY */
+#define REG_PORT_PHY_CTRL		0x0100
+
+#define PORT_PHY_RESET			BIT(15)
+#define PORT_PHY_LOOPBACK		BIT(14)
+#define PORT_SPEED_100MBIT		BIT(13)
+#define PORT_AUTO_NEG_ENABLE		BIT(12)
+#define PORT_POWER_DOWN			BIT(11)
+#define PORT_ISOLATE			BIT(10)
+#define PORT_AUTO_NEG_RESTART		BIT(9)
+#define PORT_FULL_DUPLEX		BIT(8)
+#define PORT_COLLISION_TEST		BIT(7)
+#define PORT_SPEED_1000MBIT		BIT(6)
+
+#define REG_PORT_PHY_STATUS		0x0102
+
+#define PORT_100BT4_CAPABLE		BIT(15)
+#define PORT_100BTX_FD_CAPABLE		BIT(14)
+#define PORT_100BTX_CAPABLE		BIT(13)
+#define PORT_10BT_FD_CAPABLE		BIT(12)
+#define PORT_10BT_CAPABLE		BIT(11)
+#define PORT_EXTENDED_STATUS		BIT(8)
+#define PORT_MII_SUPPRESS_CAPABLE	BIT(6)
+#define PORT_AUTO_NEG_ACKNOWLEDGE	BIT(5)
+#define PORT_REMOTE_FAULT		BIT(4)
+#define PORT_AUTO_NEG_CAPABLE		BIT(3)
+#define PORT_LINK_STATUS		BIT(2)
+#define PORT_JABBER_DETECT		BIT(1)
+#define PORT_EXTENDED_CAPABILITY	BIT(0)
+
+#define REG_PORT_PHY_ID_HI		0x0104
+#define REG_PORT_PHY_ID_LO		0x0106
+
+#define KSZ9477_ID_HI			0x0022
+#define KSZ9477_ID_LO			0x1622
+
+#define REG_PORT_PHY_AUTO_NEGOTIATION	0x0108
+
+#define PORT_AUTO_NEG_NEXT_PAGE		BIT(15)
+#define PORT_AUTO_NEG_REMOTE_FAULT	BIT(13)
+#define PORT_AUTO_NEG_ASYM_PAUSE	BIT(11)
+#define PORT_AUTO_NEG_SYM_PAUSE		BIT(10)
+#define PORT_AUTO_NEG_100BT4		BIT(9)
+#define PORT_AUTO_NEG_100BTX_FD		BIT(8)
+#define PORT_AUTO_NEG_100BTX		BIT(7)
+#define PORT_AUTO_NEG_10BT_FD		BIT(6)
+#define PORT_AUTO_NEG_10BT		BIT(5)
+#define PORT_AUTO_NEG_SELECTOR		0x001F
+#define PORT_AUTO_NEG_802_3		0x0001
+
+#define PORT_AUTO_NEG_PAUSE		\
+	(PORT_AUTO_NEG_ASYM_PAUSE | PORT_AUTO_NEG_SYM_PAUSE)
+
+#define REG_PORT_PHY_REMOTE_CAPABILITY	0x010A
+
+#define PORT_REMOTE_NEXT_PAGE		BIT(15)
+#define PORT_REMOTE_ACKNOWLEDGE		BIT(14)
+#define PORT_REMOTE_REMOTE_FAULT	BIT(13)
+#define PORT_REMOTE_ASYM_PAUSE		BIT(11)
+#define PORT_REMOTE_SYM_PAUSE		BIT(10)
+#define PORT_REMOTE_100BTX_FD		BIT(8)
+#define PORT_REMOTE_100BTX		BIT(7)
+#define PORT_REMOTE_10BT_FD		BIT(6)
+#define PORT_REMOTE_10BT		BIT(5)
+
+#define REG_PORT_PHY_1000_CTRL		0x0112
+
+#define PORT_AUTO_NEG_MANUAL		BIT(12)
+#define PORT_AUTO_NEG_MASTER		BIT(11)
+#define PORT_AUTO_NEG_MASTER_PREFERRED	BIT(10)
+#define PORT_AUTO_NEG_1000BT_FD		BIT(9)
+#define PORT_AUTO_NEG_1000BT		BIT(8)
+
+#define REG_PORT_PHY_1000_STATUS	0x0114
+
+#define PORT_MASTER_FAULT		BIT(15)
+#define PORT_LOCAL_MASTER		BIT(14)
+#define PORT_LOCAL_RX_OK		BIT(13)
+#define PORT_REMOTE_RX_OK		BIT(12)
+#define PORT_REMOTE_1000BT_FD		BIT(11)
+#define PORT_REMOTE_1000BT		BIT(10)
+#define PORT_REMOTE_IDLE_CNT_M		0x0F
+
+#define PORT_PHY_1000_STATIC_STATUS	\
+	(PORT_LOCAL_RX_OK |		\
+	PORT_REMOTE_RX_OK |		\
+	PORT_REMOTE_1000BT_FD |		\
+	PORT_REMOTE_1000BT)
+
+#define REG_PORT_PHY_MMD_SETUP		0x011A
+
+#define PORT_MMD_OP_MODE_M		0x3
+#define PORT_MMD_OP_MODE_S		14
+#define PORT_MMD_OP_INDEX		0
+#define PORT_MMD_OP_DATA_NO_INCR	1
+#define PORT_MMD_OP_DATA_INCR_RW	2
+#define PORT_MMD_OP_DATA_INCR_W		3
+#define PORT_MMD_DEVICE_ID_M		0x1F
+
+#define MMD_SETUP(mode, dev)		\
+	(((u16)(mode) << PORT_MMD_OP_MODE_S) | (dev))
+
+#define REG_PORT_PHY_MMD_INDEX_DATA	0x011C
+
+#define MMD_DEVICE_ID_DSP		1
+
+#define MMD_DSP_SQI_CHAN_A		0xAC
+#define MMD_DSP_SQI_CHAN_B		0xAD
+#define MMD_DSP_SQI_CHAN_C		0xAE
+#define MMD_DSP_SQI_CHAN_D		0xAF
+
+#define DSP_SQI_ERR_DETECTED		BIT(15)
+#define DSP_SQI_AVG_ERR			0x7FFF
+
+#define MMD_DEVICE_ID_COMMON		2
+
+#define MMD_DEVICE_ID_EEE_ADV		7
+
+#define MMD_EEE_ADV			0x3C
+#define EEE_ADV_100MBIT			BIT(1)
+#define EEE_ADV_1GBIT			BIT(2)
+
+#define MMD_EEE_LP_ADV			0x3D
+#define MMD_EEE_MSG_CODE		0x3F
+
+#define MMD_DEVICE_ID_AFED		0x1C
+
+#define REG_PORT_PHY_EXTENDED_STATUS	0x011E
+
+#define PORT_100BTX_FD_ABLE		BIT(15)
+#define PORT_100BTX_ABLE		BIT(14)
+#define PORT_10BT_FD_ABLE		BIT(13)
+#define PORT_10BT_ABLE			BIT(12)
+
+#define REG_PORT_SGMII_ADDR__4		0x0200
+#define PORT_SGMII_AUTO_INCR		BIT(23)
+#define PORT_SGMII_DEVICE_ID_M		0x1F
+#define PORT_SGMII_DEVICE_ID_S		16
+#define PORT_SGMII_ADDR_M		(BIT(21) - 1)
+
+#define REG_PORT_SGMII_DATA__4		0x0204
+#define PORT_SGMII_DATA_M		(BIT(16) - 1)
+
+#define MMD_DEVICE_ID_PMA		0x01
+#define MMD_DEVICE_ID_PCS		0x03
+#define MMD_DEVICE_ID_PHY_XS		0x04
+#define MMD_DEVICE_ID_DTE_XS		0x05
+#define MMD_DEVICE_ID_AN		0x07
+#define MMD_DEVICE_ID_VENDOR_CTRL	0x1E
+#define MMD_DEVICE_ID_VENDOR_MII	0x1F
+
+#define SR_MII				MMD_DEVICE_ID_VENDOR_MII
+
+#define MMD_SR_MII_CTRL			0x0000
+
+#define SR_MII_RESET			BIT(15)
+#define SR_MII_LOOPBACK			BIT(14)
+#define SR_MII_SPEED_100MBIT		BIT(13)
+#define SR_MII_AUTO_NEG_ENABLE		BIT(12)
+#define SR_MII_POWER_DOWN		BIT(11)
+#define SR_MII_AUTO_NEG_RESTART		BIT(9)
+#define SR_MII_FULL_DUPLEX		BIT(8)
+#define SR_MII_SPEED_1000MBIT		BIT(6)
+
+#define MMD_SR_MII_STATUS		0x0001
+#define MMD_SR_MII_ID_1			0x0002
+#define MMD_SR_MII_ID_2			0x0003
+#define MMD_SR_MII_AUTO_NEGOTIATION	0x0004
+
+#define SR_MII_AUTO_NEG_NEXT_PAGE	BIT(15)
+#define SR_MII_AUTO_NEG_REMOTE_FAULT_M	0x3
+#define SR_MII_AUTO_NEG_REMOTE_FAULT_S	12
+#define SR_MII_AUTO_NEG_NO_ERROR	0
+#define SR_MII_AUTO_NEG_OFFLINE		1
+#define SR_MII_AUTO_NEG_LINK_FAILURE	2
+#define SR_MII_AUTO_NEG_ERROR		3
+#define SR_MII_AUTO_NEG_PAUSE_M		0x3
+#define SR_MII_AUTO_NEG_PAUSE_S		7
+#define SR_MII_AUTO_NEG_NO_PAUSE	0
+#define SR_MII_AUTO_NEG_ASYM_PAUSE_TX	1
+#define SR_MII_AUTO_NEG_SYM_PAUSE	2
+#define SR_MII_AUTO_NEG_ASYM_PAUSE_RX	3
+#define SR_MII_AUTO_NEG_HALF_DUPLEX	BIT(6)
+#define SR_MII_AUTO_NEG_FULL_DUPLEX	BIT(5)
+
+#define MMD_SR_MII_REMOTE_CAPABILITY	0x0005
+#define MMD_SR_MII_AUTO_NEG_EXP		0x0006
+#define MMD_SR_MII_AUTO_NEG_EXT		0x000F
+
+#define MMD_SR_MII_DIGITAL_CTRL_1	0x8000
+
+#define MMD_SR_MII_AUTO_NEG_CTRL	0x8001
+
+#define SR_MII_8_BIT			BIT(8)
+#define SR_MII_SGMII_LINK_UP		BIT(4)
+#define SR_MII_TX_CFG_PHY_MASTER	BIT(3)
+#define SR_MII_PCS_MODE_M		0x3
+#define SR_MII_PCS_MODE_S		1
+#define SR_MII_PCS_SGMII		2
+#define SR_MII_AUTO_NEG_COMPLETE_INTR	BIT(0)
+
+#define MMD_SR_MII_AUTO_NEG_STATUS	0x8002
+
+#define SR_MII_STAT_LINK_UP		BIT(4)
+#define SR_MII_STAT_M			0x3
+#define SR_MII_STAT_S			2
+#define SR_MII_STAT_10_MBPS		0
+#define SR_MII_STAT_100_MBPS		1
+#define SR_MII_STAT_1000_MBPS		2
+#define SR_MII_STAT_FULL_DUPLEX		BIT(1)
+
+#define MMD_SR_MII_PHY_CTRL		0x80A0
+
+#define SR_MII_PHY_LANE_SEL_M		0xF
+#define SR_MII_PHY_LANE_SEL_S		8
+#define SR_MII_PHY_WRITE		BIT(1)
+#define SR_MII_PHY_START_BUSY		BIT(0)
+
+#define MMD_SR_MII_PHY_ADDR		0x80A1
+
+#define SR_MII_PHY_ADDR_M		(BIT(16) - 1)
+
+#define MMD_SR_MII_PHY_DATA		0x80A2
+
+#define SR_MII_PHY_DATA_M		(BIT(16) - 1)
+
+#define SR_MII_PHY_JTAG_CHIP_ID_HI	0x000C
+#define SR_MII_PHY_JTAG_CHIP_ID_LO	0x000D
+
+#define REG_PORT_PHY_REMOTE_LB_LED	0x0122
+
+#define PORT_REMOTE_LOOPBACK		BIT(8)
+#define PORT_LED_SELECT			(3 << 6)
+#define PORT_LED_CTRL			(3 << 4)
+#define PORT_LED_CTRL_TEST		BIT(3)
+#define PORT_10BT_PREAMBLE		BIT(2)
+#define PORT_LINK_MD_10BT_ENABLE	BIT(1)
+#define PORT_LINK_MD_PASS		BIT(0)
+
+#define REG_PORT_PHY_LINK_MD		0x0124
+
+#define PORT_START_CABLE_DIAG		BIT(15)
+#define PORT_TX_DISABLE			BIT(14)
+#define PORT_CABLE_DIAG_PAIR_M		0x3
+#define PORT_CABLE_DIAG_PAIR_S		12
+#define PORT_CABLE_DIAG_SELECT_M	0x3
+#define PORT_CABLE_DIAG_SELECT_S	10
+#define PORT_CABLE_DIAG_RESULT_M	0x3
+#define PORT_CABLE_DIAG_RESULT_S	8
+#define PORT_CABLE_STAT_NORMAL		0
+#define PORT_CABLE_STAT_OPEN		1
+#define PORT_CABLE_STAT_SHORT		2
+#define PORT_CABLE_STAT_FAILED		3
+#define PORT_CABLE_FAULT_COUNTER	0x00FF
+
+#define REG_PORT_PHY_PMA_STATUS		0x0126
+
+#define PORT_1000_LINK_GOOD		BIT(1)
+#define PORT_100_LINK_GOOD		BIT(0)
+
+#define REG_PORT_PHY_DIGITAL_STATUS	0x0128
+
+#define PORT_LINK_DETECT		BIT(14)
+#define PORT_SIGNAL_DETECT		BIT(13)
+#define PORT_PHY_STAT_MDI		BIT(12)
+#define PORT_PHY_STAT_MASTER		BIT(11)
+
+#define REG_PORT_PHY_RXER_COUNTER	0x012A
+
+#define REG_PORT_PHY_INT_ENABLE		0x0136
+#define REG_PORT_PHY_INT_STATUS		0x0137
+
+#define JABBER_INT			BIT(7)
+#define RX_ERR_INT			BIT(6)
+#define PAGE_RX_INT			BIT(5)
+#define PARALLEL_DETECT_FAULT_INT	BIT(4)
+#define LINK_PARTNER_ACK_INT		BIT(3)
+#define LINK_DOWN_INT			BIT(2)
+#define REMOTE_FAULT_INT		BIT(1)
+#define LINK_UP_INT			BIT(0)
+
+#define REG_PORT_PHY_DIGITAL_DEBUG_1	0x0138
+
+#define PORT_REG_CLK_SPEED_25_MHZ	BIT(14)
+#define PORT_PHY_FORCE_MDI		BIT(7)
+#define PORT_PHY_AUTO_MDIX_DISABLE	BIT(6)
+
+/* Same as PORT_PHY_LOOPBACK */
+#define PORT_PHY_PCS_LOOPBACK		BIT(0)
+
+#define REG_PORT_PHY_DIGITAL_DEBUG_2	0x013A
+
+#define REG_PORT_PHY_DIGITAL_DEBUG_3	0x013C
+
+#define PORT_100BT_FIXED_LATENCY	BIT(15)
+
+#define REG_PORT_PHY_PHY_CTRL		0x013E
+
+#define PORT_INT_PIN_HIGH		BIT(14)
+#define PORT_ENABLE_JABBER		BIT(9)
+#define PORT_STAT_SPEED_1000MBIT	BIT(6)
+#define PORT_STAT_SPEED_100MBIT		BIT(5)
+#define PORT_STAT_SPEED_10MBIT		BIT(4)
+#define PORT_STAT_FULL_DUPLEX		BIT(3)
+
+/* Same as PORT_PHY_STAT_MASTER */
+#define PORT_STAT_MASTER		BIT(2)
+#define PORT_RESET			BIT(1)
+#define PORT_LINK_STATUS_FAIL		BIT(0)
+
+/* 3 - xMII */
+#define PORT_SGMII_SEL			BIT(7)
+#define PORT_GRXC_ENABLE		BIT(0)
+
+#define PORT_RMII_CLK_SEL		BIT(7)
+#define PORT_MII_SEL_EDGE		BIT(5)
+
+/* 4 - MAC */
+#define REG_PORT_MAC_CTRL_0		0x0400
+
+#define PORT_BROADCAST_STORM		BIT(1)
+#define PORT_JUMBO_FRAME		BIT(0)
+
+#define REG_PORT_MAC_CTRL_1		0x0401
+
+#define PORT_BACK_PRESSURE		BIT(3)
+#define PORT_PASS_ALL			BIT(0)
+
+#define REG_PORT_MAC_CTRL_2		0x0402
+
+#define PORT_100BT_EEE_DISABLE		BIT(7)
+#define PORT_1000BT_EEE_DISABLE		BIT(6)
+
+#define REG_PORT_MAC_IN_RATE_LIMIT	0x0403
+
+#define PORT_IN_PORT_BASED_S		6
+#define PORT_RATE_PACKET_BASED_S	5
+#define PORT_IN_FLOW_CTRL_S		4
+#define PORT_COUNT_IFG_S		1
+#define PORT_COUNT_PREAMBLE_S		0
+#define PORT_IN_PORT_BASED		BIT(6)
+#define PORT_IN_PACKET_BASED		BIT(5)
+#define PORT_IN_FLOW_CTRL		BIT(4)
+#define PORT_IN_LIMIT_MODE_M		0x3
+#define PORT_IN_LIMIT_MODE_S		2
+#define PORT_IN_ALL			0
+#define PORT_IN_UNICAST			1
+#define PORT_IN_MULTICAST		2
+#define PORT_IN_BROADCAST		3
+#define PORT_COUNT_IFG			BIT(1)
+#define PORT_COUNT_PREAMBLE		BIT(0)
+
+#define REG_PORT_IN_RATE_0		0x0410
+#define REG_PORT_IN_RATE_1		0x0411
+#define REG_PORT_IN_RATE_2		0x0412
+#define REG_PORT_IN_RATE_3		0x0413
+#define REG_PORT_IN_RATE_4		0x0414
+#define REG_PORT_IN_RATE_5		0x0415
+#define REG_PORT_IN_RATE_6		0x0416
+#define REG_PORT_IN_RATE_7		0x0417
+
+#define REG_PORT_OUT_RATE_0		0x0420
+#define REG_PORT_OUT_RATE_1		0x0421
+#define REG_PORT_OUT_RATE_2		0x0422
+#define REG_PORT_OUT_RATE_3		0x0423
+
+#define PORT_RATE_LIMIT_M		(BIT(7) - 1)
+
+/* 5 - MIB Counters */
+#define REG_PORT_MIB_CTRL_STAT__4	0x0500
+
+#define MIB_COUNTER_READ		BIT(25)
+#define MIB_COUNTER_FLUSH_FREEZE	BIT(24)
+#define MIB_COUNTER_INDEX_M		(BIT(8) - 1)
+#define MIB_COUNTER_INDEX_S		16
+#define MIB_COUNTER_DATA_HI_M		0xF
+
+#define REG_PORT_MIB_DATA		0x0504
+
+/* 6 - ACL */
+#define REG_PORT_ACL_0			0x0600
+
+#define ACL_FIRST_RULE_M		0xF
+
+#define REG_PORT_ACL_1			0x0601
+
+#define ACL_MODE_M			0x3
+#define ACL_MODE_S			4
+#define ACL_MODE_DISABLE		0
+#define ACL_MODE_LAYER_2		1
+#define ACL_MODE_LAYER_3		2
+#define ACL_MODE_LAYER_4		3
+#define ACL_ENABLE_M			0x3
+#define ACL_ENABLE_S			2
+#define ACL_ENABLE_2_COUNT		0
+#define ACL_ENABLE_2_TYPE		1
+#define ACL_ENABLE_2_MAC		2
+#define ACL_ENABLE_2_BOTH		3
+#define ACL_ENABLE_3_IP			1
+#define ACL_ENABLE_3_SRC_DST_COMP	2
+#define ACL_ENABLE_4_PROTOCOL		0
+#define ACL_ENABLE_4_TCP_PORT_COMP	1
+#define ACL_ENABLE_4_UDP_PORT_COMP	2
+#define ACL_ENABLE_4_TCP_SEQN_COMP	3
+#define ACL_SRC				BIT(1)
+#define ACL_EQUAL			BIT(0)
+
+#define REG_PORT_ACL_2			0x0602
+#define REG_PORT_ACL_3			0x0603
+
+#define ACL_MAX_PORT			0xFFFF
+
+#define REG_PORT_ACL_4			0x0604
+#define REG_PORT_ACL_5			0x0605
+
+#define ACL_MIN_PORT			0xFFFF
+#define ACL_IP_ADDR			0xFFFFFFFF
+#define ACL_TCP_SEQNUM			0xFFFFFFFF
+
+#define REG_PORT_ACL_6			0x0606
+
+#define ACL_RESERVED			0xF8
+#define ACL_PORT_MODE_M			0x3
+#define ACL_PORT_MODE_S			1
+#define ACL_PORT_MODE_DISABLE		0
+#define ACL_PORT_MODE_EITHER		1
+#define ACL_PORT_MODE_IN_RANGE		2
+#define ACL_PORT_MODE_OUT_OF_RANGE	3
+
+#define REG_PORT_ACL_7			0x0607
+
+#define ACL_TCP_FLAG_ENABLE		BIT(0)
+
+#define REG_PORT_ACL_8			0x0608
+
+#define ACL_TCP_FLAG_M			0xFF
+
+#define REG_PORT_ACL_9			0x0609
+
+#define ACL_TCP_FLAG			0xFF
+#define ACL_ETH_TYPE			0xFFFF
+#define ACL_IP_M			0xFFFFFFFF
+
+#define REG_PORT_ACL_A			0x060A
+
+#define ACL_PRIO_MODE_M			0x3
+#define ACL_PRIO_MODE_S			6
+#define ACL_PRIO_MODE_DISABLE		0
+#define ACL_PRIO_MODE_HIGHER		1
+#define ACL_PRIO_MODE_LOWER		2
+#define ACL_PRIO_MODE_REPLACE		3
+#define ACL_PRIO_M			KS_PRIO_M
+#define ACL_PRIO_S			3
+#define ACL_VLAN_PRIO_REPLACE		BIT(2)
+#define ACL_VLAN_PRIO_M			KS_PRIO_M
+#define ACL_VLAN_PRIO_HI_M		0x3
+
+#define REG_PORT_ACL_B			0x060B
+
+#define ACL_VLAN_PRIO_LO_M		0x8
+#define ACL_VLAN_PRIO_S			7
+#define ACL_MAP_MODE_M			0x3
+#define ACL_MAP_MODE_S			5
+#define ACL_MAP_MODE_DISABLE		0
+#define ACL_MAP_MODE_OR			1
+#define ACL_MAP_MODE_AND		2
+#define ACL_MAP_MODE_REPLACE		3
+
+#define ACL_CNT_M			(BIT(11) - 1)
+#define ACL_CNT_S			5
+
+#define REG_PORT_ACL_C			0x060C
+
+#define REG_PORT_ACL_D			0x060D
+#define ACL_MSEC_UNIT			BIT(6)
+#define ACL_INTR_MODE			BIT(5)
+#define ACL_PORT_MAP			0x7F
+
+#define REG_PORT_ACL_E			0x060E
+#define REG_PORT_ACL_F			0x060F
+
+#define REG_PORT_ACL_BYTE_EN_MSB	0x0610
+#define REG_PORT_ACL_BYTE_EN_LSB	0x0611
+
+#define ACL_ACTION_START		0xA
+#define ACL_ACTION_LEN			4
+#define ACL_INTR_CNT_START		0xD
+#define ACL_RULESET_START		0xE
+#define ACL_RULESET_LEN			2
+#define ACL_TABLE_LEN			16
+
+#define ACL_ACTION_ENABLE		0x003C
+#define ACL_MATCH_ENABLE		0x7FC3
+#define ACL_RULESET_ENABLE		0x8003
+#define ACL_BYTE_ENABLE			0xFFFF
+
+#define REG_PORT_ACL_CTRL_0		0x0612
+
+#define PORT_ACL_WRITE_DONE		BIT(6)
+#define PORT_ACL_READ_DONE		BIT(5)
+#define PORT_ACL_WRITE			BIT(4)
+#define PORT_ACL_INDEX_M		0xF
+
+#define REG_PORT_ACL_CTRL_1		0x0613
+
+/* 8 - Classification and Policing */
+#define REG_PORT_MRI_MIRROR_CTRL	0x0800
+
+#define PORT_MIRROR_RX			BIT(6)
+#define PORT_MIRROR_TX			BIT(5)
+#define PORT_MIRROR_SNIFFER		BIT(1)
+
+#define REG_PORT_MRI_PRIO_CTRL		0x0801
+
+#define PORT_HIGHEST_PRIO		BIT(7)
+#define PORT_OR_PRIO			BIT(6)
+#define PORT_MAC_PRIO_ENABLE		BIT(4)
+#define PORT_VLAN_PRIO_ENABLE		BIT(3)
+#define PORT_802_1P_PRIO_ENABLE		BIT(2)
+#define PORT_DIFFSERV_PRIO_ENABLE	BIT(1)
+#define PORT_ACL_PRIO_ENABLE		BIT(0)
+
+#define REG_PORT_MRI_MAC_CTRL		0x0802
+
+#define PORT_USER_PRIO_CEILING		BIT(7)
+#define PORT_DROP_NON_VLAN		BIT(4)
+#define PORT_DROP_TAG			BIT(3)
+#define PORT_BASED_PRIO_M		KS_PRIO_M
+#define PORT_BASED_PRIO_S		0
+
+#define REG_PORT_MRI_AUTHEN_CTRL	0x0803
+
+#define PORT_ACL_ENABLE			BIT(2)
+#define PORT_AUTHEN_MODE		0x3
+#define PORT_AUTHEN_PASS		0
+#define PORT_AUTHEN_BLOCK		1
+#define PORT_AUTHEN_TRAP		2
+
+#define REG_PORT_MRI_INDEX__4		0x0804
+
+#define MRI_INDEX_P_M			0x7
+#define MRI_INDEX_P_S			16
+#define MRI_INDEX_Q_M			0x3
+#define MRI_INDEX_Q_S			0
+
+#define REG_PORT_MRI_TC_MAP__4		0x0808
+
+#define PORT_TC_MAP_M			0xf
+#define PORT_TC_MAP_S			4
+
+#define REG_PORT_MRI_POLICE_CTRL__4	0x080C
+
+#define POLICE_DROP_ALL			BIT(10)
+#define POLICE_PACKET_TYPE_M		0x3
+#define POLICE_PACKET_TYPE_S		8
+#define POLICE_PACKET_DROPPED		0
+#define POLICE_PACKET_GREEN		1
+#define POLICE_PACKET_YELLOW		2
+#define POLICE_PACKET_RED		3
+#define PORT_BASED_POLICING		BIT(7)
+#define NON_DSCP_COLOR_M		0x3
+#define NON_DSCP_COLOR_S		5
+#define COLOR_MARK_ENABLE		BIT(4)
+#define COLOR_REMAP_ENABLE		BIT(3)
+#define POLICE_DROP_SRP			BIT(2)
+#define POLICE_COLOR_NOT_AWARE		BIT(1)
+#define POLICE_ENABLE			BIT(0)
+
+#define REG_PORT_POLICE_COLOR_0__4	0x0810
+#define REG_PORT_POLICE_COLOR_1__4	0x0814
+#define REG_PORT_POLICE_COLOR_2__4	0x0818
+#define REG_PORT_POLICE_COLOR_3__4	0x081C
+
+#define POLICE_COLOR_MAP_S		2
+#define POLICE_COLOR_MAP_M		(BIT(POLICE_COLOR_MAP_S) - 1)
+
+#define REG_PORT_POLICE_RATE__4		0x0820
+
+#define POLICE_CIR_S			16
+#define POLICE_PIR_S			0
+
+#define REG_PORT_POLICE_BURST_SIZE__4	0x0824
+
+#define POLICE_BURST_SIZE_M		0x3FFF
+#define POLICE_CBS_S			16
+#define POLICE_PBS_S			0
+
+#define REG_PORT_WRED_PM_CTRL_0__4	0x0830
+
+#define WRED_PM_CTRL_M			(BIT(11) - 1)
+
+#define WRED_PM_MAX_THRESHOLD_S		16
+#define WRED_PM_MIN_THRESHOLD_S		0
+
+#define REG_PORT_WRED_PM_CTRL_1__4	0x0834
+
+#define WRED_PM_MULTIPLIER_S		16
+#define WRED_PM_AVG_QUEUE_SIZE_S	0
+
+#define REG_PORT_WRED_QUEUE_CTRL_0__4	0x0840
+#define REG_PORT_WRED_QUEUE_CTRL_1__4	0x0844
+
+#define REG_PORT_WRED_QUEUE_PMON__4	0x0848
+
+#define WRED_RANDOM_DROP_ENABLE		BIT(31)
+#define WRED_PMON_FLUSH			BIT(30)
+#define WRED_DROP_GYR_DISABLE		BIT(29)
+#define WRED_DROP_YR_DISABLE		BIT(28)
+#define WRED_DROP_R_DISABLE		BIT(27)
+#define WRED_DROP_ALL			BIT(26)
+#define WRED_PMON_M			(BIT(24) - 1)
+
+/* 9 - Shaping */
+
+#define REG_PORT_MTI_QUEUE_INDEX__4	0x0900
+
+#define REG_PORT_MTI_QUEUE_CTRL_0__4	0x0904
+
+#define MTI_PVID_REPLACE		BIT(0)
+
+#define REG_PORT_MTI_QUEUE_CTRL_0	0x0914
+
+#define MTI_SCHEDULE_MODE_M		0x3
+#define MTI_SCHEDULE_MODE_S		6
+#define MTI_SCHEDULE_STRICT_PRIO	0
+#define MTI_SCHEDULE_WRR		2
+#define MTI_SHAPING_M			0x3
+#define MTI_SHAPING_S			4
+#define MTI_SHAPING_OFF			0
+#define MTI_SHAPING_SRP			1
+#define MTI_SHAPING_TIME_AWARE		2
+
+#define REG_PORT_MTI_QUEUE_CTRL_1	0x0915
+
+#define MTI_TX_RATIO_M			(BIT(7) - 1)
+
+#define REG_PORT_MTI_QUEUE_CTRL_2__2	0x0916
+#define REG_PORT_MTI_HI_WATER_MARK	0x0916
+#define REG_PORT_MTI_QUEUE_CTRL_3__2	0x0918
+#define REG_PORT_MTI_LO_WATER_MARK	0x0918
+#define REG_PORT_MTI_QUEUE_CTRL_4__2	0x091A
+#define REG_PORT_MTI_CREDIT_INCREMENT	0x091A
+
+/* A - QM */
+
+#define REG_PORT_QM_CTRL__4		0x0A00
+
+#define PORT_QM_DROP_PRIO_M		0x3
+
+#define REG_PORT_VLAN_MEMBERSHIP__4	0x0A04
+
+#define REG_PORT_QM_QUEUE_INDEX__4	0x0A08
+
+#define PORT_QM_QUEUE_INDEX_S		24
+#define PORT_QM_BURST_SIZE_S		16
+#define PORT_QM_MIN_RESV_SPACE_M	(BIT(11) - 1)
+
+#define REG_PORT_QM_WATER_MARK__4	0x0A0C
+
+#define PORT_QM_HI_WATER_MARK_S		16
+#define PORT_QM_LO_WATER_MARK_S		0
+#define PORT_QM_WATER_MARK_M		(BIT(11) - 1)
+
+#define REG_PORT_QM_TX_CNT_0__4		0x0A10
+
+#define PORT_QM_TX_CNT_USED_S		0
+#define PORT_QM_TX_CNT_M		(BIT(11) - 1)
+
+#define REG_PORT_QM_TX_CNT_1__4		0x0A14
+
+#define PORT_QM_TX_CNT_CALCULATED_S	16
+#define PORT_QM_TX_CNT_AVAIL_S		0
+
+/* B - LUE */
+#define REG_PORT_LUE_CTRL		0x0B00
+
+#define PORT_VLAN_LOOKUP_VID_0		BIT(7)
+#define PORT_INGRESS_FILTER		BIT(6)
+#define PORT_DISCARD_NON_VID		BIT(5)
+#define PORT_MAC_BASED_802_1X		BIT(4)
+#define PORT_SRC_ADDR_FILTER		BIT(3)
+
+#define REG_PORT_LUE_MSTP_INDEX		0x0B01
+
+#define REG_PORT_LUE_MSTP_STATE		0x0B04
+
+/* C - PTP */
+
+#define REG_PTP_PORT_RX_DELAY__2	0x0C00
+#define REG_PTP_PORT_TX_DELAY__2	0x0C02
+#define REG_PTP_PORT_ASYM_DELAY__2	0x0C04
+
+#define REG_PTP_PORT_XDELAY_TS		0x0C08
+#define REG_PTP_PORT_XDELAY_TS_H	0x0C08
+#define REG_PTP_PORT_XDELAY_TS_L	0x0C0A
+
+#define REG_PTP_PORT_SYNC_TS		0x0C0C
+#define REG_PTP_PORT_SYNC_TS_H		0x0C0C
+#define REG_PTP_PORT_SYNC_TS_L		0x0C0E
+
+#define REG_PTP_PORT_PDRESP_TS		0x0C10
+#define REG_PTP_PORT_PDRESP_TS_H	0x0C10
+#define REG_PTP_PORT_PDRESP_TS_L	0x0C12
+
+#define REG_PTP_PORT_TX_INT_STATUS__2	0x0C14
+#define REG_PTP_PORT_TX_INT_ENABLE__2	0x0C16
+
+#define PTP_PORT_SYNC_INT		BIT(15)
+#define PTP_PORT_XDELAY_REQ_INT		BIT(14)
+#define PTP_PORT_PDELAY_RESP_INT	BIT(13)
+
+#define REG_PTP_PORT_LINK_DELAY__4	0x0C18
+
+#define PRIO_QUEUES			4
+#define RX_PRIO_QUEUES			8
+
+#define KS_PRIO_IN_REG			2
+
+#define TOTAL_PORT_NUM			7
+
+#define KSZ9477_COUNTER_NUM		0x20
+#define TOTAL_KSZ9477_COUNTER_NUM	(KSZ9477_COUNTER_NUM + 2 + 2)
+
+#define SWITCH_COUNTER_NUM		KSZ9477_COUNTER_NUM
+#define TOTAL_SWITCH_COUNTER_NUM	TOTAL_KSZ9477_COUNTER_NUM
+
+#define P_BCAST_STORM_CTRL		REG_PORT_MAC_CTRL_0
+#define P_PRIO_CTRL			REG_PORT_MRI_PRIO_CTRL
+#define P_MIRROR_CTRL			REG_PORT_MRI_MIRROR_CTRL
+#define P_PHY_CTRL			REG_PORT_PHY_CTRL
+#define P_RATE_LIMIT_CTRL		REG_PORT_MAC_IN_RATE_LIMIT
+
+#define S_LINK_AGING_CTRL		REG_SW_LUE_CTRL_1
+#define S_MIRROR_CTRL			REG_SW_MRI_CTRL_0
+#define S_REPLACE_VID_CTRL		REG_SW_MAC_CTRL_2
+#define S_802_1P_PRIO_CTRL		REG_SW_MAC_802_1P_MAP_0
+#define S_TOS_PRIO_CTRL			REG_SW_MAC_TOS_PRIO_0
+#define S_FLUSH_TABLE_CTRL		REG_SW_LUE_CTRL_1
+
+#define SW_FLUSH_DYN_MAC_TABLE		SW_FLUSH_MSTP_TABLE
+
+#define MAX_TIMESTAMP_UNIT		2
+#define MAX_TRIG_UNIT			3
+#define MAX_TIMESTAMP_EVENT_UNIT	8
+#define MAX_GPIO			4
+
+#define PTP_TRIG_UNIT_M			(BIT(MAX_TRIG_UNIT) - 1)
+#define PTP_TS_UNIT_M			(BIT(MAX_TIMESTAMP_UNIT) - 1)
+
+#define KSZ9477_MAX_FRAME_SIZE		9000
+
+#endif /* KSZ9477_REGS_H */
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
new file mode 100644
index 000000000..dc9eea3c8
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -0,0 +1,3044 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip switch driver main logic
+ *
+ * Copyright (C) 2017-2019 Microchip Technology Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/microchip-ksz.h>
+#include <linux/phy.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_mdio.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
+#include <linux/micrel_phy.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "ksz_common.h"
+#include "ksz8.h"
+#include "ksz9477.h"
+#include "lan937x.h"
+
+#define MIB_COUNTER_NUM 0x20
+
+struct ksz_stats_raw {
+	u64 rx_hi;
+	u64 rx_undersize;
+	u64 rx_fragments;
+	u64 rx_oversize;
+	u64 rx_jabbers;
+	u64 rx_symbol_err;
+	u64 rx_crc_err;
+	u64 rx_align_err;
+	u64 rx_mac_ctrl;
+	u64 rx_pause;
+	u64 rx_bcast;
+	u64 rx_mcast;
+	u64 rx_ucast;
+	u64 rx_64_or_less;
+	u64 rx_65_127;
+	u64 rx_128_255;
+	u64 rx_256_511;
+	u64 rx_512_1023;
+	u64 rx_1024_1522;
+	u64 rx_1523_2000;
+	u64 rx_2001;
+	u64 tx_hi;
+	u64 tx_late_col;
+	u64 tx_pause;
+	u64 tx_bcast;
+	u64 tx_mcast;
+	u64 tx_ucast;
+	u64 tx_deferred;
+	u64 tx_total_col;
+	u64 tx_exc_col;
+	u64 tx_single_col;
+	u64 tx_mult_col;
+	u64 rx_total;
+	u64 tx_total;
+	u64 rx_discards;
+	u64 tx_discards;
+};
+
+static const struct ksz_mib_names ksz88xx_mib_names[] = {
+	{ 0x00, "rx" },
+	{ 0x01, "rx_hi" },
+	{ 0x02, "rx_undersize" },
+	{ 0x03, "rx_fragments" },
+	{ 0x04, "rx_oversize" },
+	{ 0x05, "rx_jabbers" },
+	{ 0x06, "rx_symbol_err" },
+	{ 0x07, "rx_crc_err" },
+	{ 0x08, "rx_align_err" },
+	{ 0x09, "rx_mac_ctrl" },
+	{ 0x0a, "rx_pause" },
+	{ 0x0b, "rx_bcast" },
+	{ 0x0c, "rx_mcast" },
+	{ 0x0d, "rx_ucast" },
+	{ 0x0e, "rx_64_or_less" },
+	{ 0x0f, "rx_65_127" },
+	{ 0x10, "rx_128_255" },
+	{ 0x11, "rx_256_511" },
+	{ 0x12, "rx_512_1023" },
+	{ 0x13, "rx_1024_1522" },
+	{ 0x14, "tx" },
+	{ 0x15, "tx_hi" },
+	{ 0x16, "tx_late_col" },
+	{ 0x17, "tx_pause" },
+	{ 0x18, "tx_bcast" },
+	{ 0x19, "tx_mcast" },
+	{ 0x1a, "tx_ucast" },
+	{ 0x1b, "tx_deferred" },
+	{ 0x1c, "tx_total_col" },
+	{ 0x1d, "tx_exc_col" },
+	{ 0x1e, "tx_single_col" },
+	{ 0x1f, "tx_mult_col" },
+	{ 0x100, "rx_discards" },
+	{ 0x101, "tx_discards" },
+};
+
+static const struct ksz_mib_names ksz9477_mib_names[] = {
+	{ 0x00, "rx_hi" },
+	{ 0x01, "rx_undersize" },
+	{ 0x02, "rx_fragments" },
+	{ 0x03, "rx_oversize" },
+	{ 0x04, "rx_jabbers" },
+	{ 0x05, "rx_symbol_err" },
+	{ 0x06, "rx_crc_err" },
+	{ 0x07, "rx_align_err" },
+	{ 0x08, "rx_mac_ctrl" },
+	{ 0x09, "rx_pause" },
+	{ 0x0A, "rx_bcast" },
+	{ 0x0B, "rx_mcast" },
+	{ 0x0C, "rx_ucast" },
+	{ 0x0D, "rx_64_or_less" },
+	{ 0x0E, "rx_65_127" },
+	{ 0x0F, "rx_128_255" },
+	{ 0x10, "rx_256_511" },
+	{ 0x11, "rx_512_1023" },
+	{ 0x12, "rx_1024_1522" },
+	{ 0x13, "rx_1523_2000" },
+	{ 0x14, "rx_2001" },
+	{ 0x15, "tx_hi" },
+	{ 0x16, "tx_late_col" },
+	{ 0x17, "tx_pause" },
+	{ 0x18, "tx_bcast" },
+	{ 0x19, "tx_mcast" },
+	{ 0x1A, "tx_ucast" },
+	{ 0x1B, "tx_deferred" },
+	{ 0x1C, "tx_total_col" },
+	{ 0x1D, "tx_exc_col" },
+	{ 0x1E, "tx_single_col" },
+	{ 0x1F, "tx_mult_col" },
+	{ 0x80, "rx_total" },
+	{ 0x81, "tx_total" },
+	{ 0x82, "rx_discards" },
+	{ 0x83, "tx_discards" },
+};
+
+static const struct ksz_dev_ops ksz8_dev_ops = {
+	.setup = ksz8_setup,
+	.get_port_addr = ksz8_get_port_addr,
+	.cfg_port_member = ksz8_cfg_port_member,
+	.flush_dyn_mac_table = ksz8_flush_dyn_mac_table,
+	.port_setup = ksz8_port_setup,
+	.r_phy = ksz8_r_phy,
+	.w_phy = ksz8_w_phy,
+	.r_mib_cnt = ksz8_r_mib_cnt,
+	.r_mib_pkt = ksz8_r_mib_pkt,
+	.freeze_mib = ksz8_freeze_mib,
+	.port_init_cnt = ksz8_port_init_cnt,
+	.fdb_dump = ksz8_fdb_dump,
+	.mdb_add = ksz8_mdb_add,
+	.mdb_del = ksz8_mdb_del,
+	.vlan_filtering = ksz8_port_vlan_filtering,
+	.vlan_add = ksz8_port_vlan_add,
+	.vlan_del = ksz8_port_vlan_del,
+	.mirror_add = ksz8_port_mirror_add,
+	.mirror_del = ksz8_port_mirror_del,
+	.get_caps = ksz8_get_caps,
+	.config_cpu_port = ksz8_config_cpu_port,
+	.enable_stp_addr = ksz8_enable_stp_addr,
+	.reset = ksz8_reset_switch,
+	.init = ksz8_switch_init,
+	.exit = ksz8_switch_exit,
+};
+
+static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
+					unsigned int mode,
+					phy_interface_t interface,
+					struct phy_device *phydev, int speed,
+					int duplex, bool tx_pause,
+					bool rx_pause);
+
+static const struct ksz_dev_ops ksz9477_dev_ops = {
+	.setup = ksz9477_setup,
+	.get_port_addr = ksz9477_get_port_addr,
+	.cfg_port_member = ksz9477_cfg_port_member,
+	.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
+	.port_setup = ksz9477_port_setup,
+	.set_ageing_time = ksz9477_set_ageing_time,
+	.r_phy = ksz9477_r_phy,
+	.w_phy = ksz9477_w_phy,
+	.r_mib_cnt = ksz9477_r_mib_cnt,
+	.r_mib_pkt = ksz9477_r_mib_pkt,
+	.r_mib_stat64 = ksz_r_mib_stats64,
+	.freeze_mib = ksz9477_freeze_mib,
+	.port_init_cnt = ksz9477_port_init_cnt,
+	.vlan_filtering = ksz9477_port_vlan_filtering,
+	.vlan_add = ksz9477_port_vlan_add,
+	.vlan_del = ksz9477_port_vlan_del,
+	.mirror_add = ksz9477_port_mirror_add,
+	.mirror_del = ksz9477_port_mirror_del,
+	.get_caps = ksz9477_get_caps,
+	.fdb_dump = ksz9477_fdb_dump,
+	.fdb_add = ksz9477_fdb_add,
+	.fdb_del = ksz9477_fdb_del,
+	.mdb_add = ksz9477_mdb_add,
+	.mdb_del = ksz9477_mdb_del,
+	.change_mtu = ksz9477_change_mtu,
+	.max_mtu = ksz9477_max_mtu,
+	.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
+	.config_cpu_port = ksz9477_config_cpu_port,
+	.enable_stp_addr = ksz9477_enable_stp_addr,
+	.reset = ksz9477_reset_switch,
+	.init = ksz9477_switch_init,
+	.exit = ksz9477_switch_exit,
+};
+
+static const struct ksz_dev_ops lan937x_dev_ops = {
+	.setup = lan937x_setup,
+	.teardown = lan937x_teardown,
+	.get_port_addr = ksz9477_get_port_addr,
+	.cfg_port_member = ksz9477_cfg_port_member,
+	.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
+	.port_setup = lan937x_port_setup,
+	.set_ageing_time = lan937x_set_ageing_time,
+	.r_phy = lan937x_r_phy,
+	.w_phy = lan937x_w_phy,
+	.r_mib_cnt = ksz9477_r_mib_cnt,
+	.r_mib_pkt = ksz9477_r_mib_pkt,
+	.r_mib_stat64 = ksz_r_mib_stats64,
+	.freeze_mib = ksz9477_freeze_mib,
+	.port_init_cnt = ksz9477_port_init_cnt,
+	.vlan_filtering = ksz9477_port_vlan_filtering,
+	.vlan_add = ksz9477_port_vlan_add,
+	.vlan_del = ksz9477_port_vlan_del,
+	.mirror_add = ksz9477_port_mirror_add,
+	.mirror_del = ksz9477_port_mirror_del,
+	.get_caps = lan937x_phylink_get_caps,
+	.setup_rgmii_delay = lan937x_setup_rgmii_delay,
+	.fdb_dump = ksz9477_fdb_dump,
+	.fdb_add = ksz9477_fdb_add,
+	.fdb_del = ksz9477_fdb_del,
+	.mdb_add = ksz9477_mdb_add,
+	.mdb_del = ksz9477_mdb_del,
+	.change_mtu = lan937x_change_mtu,
+	.max_mtu = ksz9477_max_mtu,
+	.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
+	.config_cpu_port = lan937x_config_cpu_port,
+	.enable_stp_addr = ksz9477_enable_stp_addr,
+	.reset = lan937x_reset_switch,
+	.init = lan937x_switch_init,
+	.exit = lan937x_switch_exit,
+};
+
+static const u16 ksz8795_regs[] = {
+	[REG_IND_CTRL_0]		= 0x6E,
+	[REG_IND_DATA_8]		= 0x70,
+	[REG_IND_DATA_CHECK]		= 0x72,
+	[REG_IND_DATA_HI]		= 0x71,
+	[REG_IND_DATA_LO]		= 0x75,
+	[REG_IND_MIB_CHECK]		= 0x74,
+	[REG_IND_BYTE]			= 0xA0,
+	[P_FORCE_CTRL]			= 0x0C,
+	[P_LINK_STATUS]			= 0x0E,
+	[P_LOCAL_CTRL]			= 0x07,
+	[P_NEG_RESTART_CTRL]		= 0x0D,
+	[P_REMOTE_STATUS]		= 0x08,
+	[P_SPEED_STATUS]		= 0x09,
+	[S_TAIL_TAG_CTRL]		= 0x0C,
+	[P_STP_CTRL]			= 0x02,
+	[S_START_CTRL]			= 0x01,
+	[S_BROADCAST_CTRL]		= 0x06,
+	[S_MULTICAST_CTRL]		= 0x04,
+	[P_XMII_CTRL_0]			= 0x06,
+	[P_XMII_CTRL_1]			= 0x06,
+};
+
+static const u32 ksz8795_masks[] = {
+	[PORT_802_1P_REMAPPING]		= BIT(7),
+	[SW_TAIL_TAG_ENABLE]		= BIT(1),
+	[MIB_COUNTER_OVERFLOW]		= BIT(6),
+	[MIB_COUNTER_VALID]		= BIT(5),
+	[VLAN_TABLE_FID]		= GENMASK(6, 0),
+	[VLAN_TABLE_MEMBERSHIP]		= GENMASK(11, 7),
+	[VLAN_TABLE_VALID]		= BIT(12),
+	[STATIC_MAC_TABLE_VALID]	= BIT(21),
+	[STATIC_MAC_TABLE_USE_FID]	= BIT(23),
+	[STATIC_MAC_TABLE_FID]		= GENMASK(30, 24),
+	[STATIC_MAC_TABLE_OVERRIDE]	= BIT(22),
+	[STATIC_MAC_TABLE_FWD_PORTS]	= GENMASK(20, 16),
+	[DYNAMIC_MAC_TABLE_ENTRIES_H]	= GENMASK(6, 0),
+	[DYNAMIC_MAC_TABLE_MAC_EMPTY]	= BIT(7),
+	[DYNAMIC_MAC_TABLE_NOT_READY]	= BIT(7),
+	[DYNAMIC_MAC_TABLE_ENTRIES]	= GENMASK(31, 29),
+	[DYNAMIC_MAC_TABLE_FID]		= GENMASK(22, 16),
+	[DYNAMIC_MAC_TABLE_SRC_PORT]	= GENMASK(26, 24),
+	[DYNAMIC_MAC_TABLE_TIMESTAMP]	= GENMASK(28, 27),
+	[P_MII_TX_FLOW_CTRL]		= BIT(5),
+	[P_MII_RX_FLOW_CTRL]		= BIT(5),
+};
+
+static const u8 ksz8795_xmii_ctrl0[] = {
+	[P_MII_100MBIT]			= 0,
+	[P_MII_10MBIT]			= 1,
+	[P_MII_FULL_DUPLEX]		= 0,
+	[P_MII_HALF_DUPLEX]		= 1,
+};
+
+static const u8 ksz8795_xmii_ctrl1[] = {
+	[P_RGMII_SEL]			= 3,
+	[P_GMII_SEL]			= 2,
+	[P_RMII_SEL]			= 1,
+	[P_MII_SEL]			= 0,
+	[P_GMII_1GBIT]			= 1,
+	[P_GMII_NOT_1GBIT]		= 0,
+};
+
+static const u8 ksz8795_shifts[] = {
+	[VLAN_TABLE_MEMBERSHIP_S]	= 7,
+	[VLAN_TABLE]			= 16,
+	[STATIC_MAC_FWD_PORTS]		= 16,
+	[STATIC_MAC_FID]		= 24,
+	[DYNAMIC_MAC_ENTRIES_H]		= 3,
+	[DYNAMIC_MAC_ENTRIES]		= 29,
+	[DYNAMIC_MAC_FID]		= 16,
+	[DYNAMIC_MAC_TIMESTAMP]		= 27,
+	[DYNAMIC_MAC_SRC_PORT]		= 24,
+};
+
+static const u16 ksz8863_regs[] = {
+	[REG_IND_CTRL_0]		= 0x79,
+	[REG_IND_DATA_8]		= 0x7B,
+	[REG_IND_DATA_CHECK]		= 0x7B,
+	[REG_IND_DATA_HI]		= 0x7C,
+	[REG_IND_DATA_LO]		= 0x80,
+	[REG_IND_MIB_CHECK]		= 0x80,
+	[P_FORCE_CTRL]			= 0x0C,
+	[P_LINK_STATUS]			= 0x0E,
+	[P_LOCAL_CTRL]			= 0x0C,
+	[P_NEG_RESTART_CTRL]		= 0x0D,
+	[P_REMOTE_STATUS]		= 0x0E,
+	[P_SPEED_STATUS]		= 0x0F,
+	[S_TAIL_TAG_CTRL]		= 0x03,
+	[P_STP_CTRL]			= 0x02,
+	[S_START_CTRL]			= 0x01,
+	[S_BROADCAST_CTRL]		= 0x06,
+	[S_MULTICAST_CTRL]		= 0x04,
+};
+
+static const u32 ksz8863_masks[] = {
+	[PORT_802_1P_REMAPPING]		= BIT(3),
+	[SW_TAIL_TAG_ENABLE]		= BIT(6),
+	[MIB_COUNTER_OVERFLOW]		= BIT(7),
+	[MIB_COUNTER_VALID]		= BIT(6),
+	[VLAN_TABLE_FID]		= GENMASK(15, 12),
+	[VLAN_TABLE_MEMBERSHIP]		= GENMASK(18, 16),
+	[VLAN_TABLE_VALID]		= BIT(19),
+	[STATIC_MAC_TABLE_VALID]	= BIT(19),
+	[STATIC_MAC_TABLE_USE_FID]	= BIT(21),
+	[STATIC_MAC_TABLE_FID]		= GENMASK(25, 22),
+	[STATIC_MAC_TABLE_OVERRIDE]	= BIT(20),
+	[STATIC_MAC_TABLE_FWD_PORTS]	= GENMASK(18, 16),
+	[DYNAMIC_MAC_TABLE_ENTRIES_H]	= GENMASK(1, 0),
+	[DYNAMIC_MAC_TABLE_MAC_EMPTY]	= BIT(2),
+	[DYNAMIC_MAC_TABLE_NOT_READY]	= BIT(7),
+	[DYNAMIC_MAC_TABLE_ENTRIES]	= GENMASK(31, 24),
+	[DYNAMIC_MAC_TABLE_FID]		= GENMASK(19, 16),
+	[DYNAMIC_MAC_TABLE_SRC_PORT]	= GENMASK(21, 20),
+	[DYNAMIC_MAC_TABLE_TIMESTAMP]	= GENMASK(23, 22),
+};
+
+static u8 ksz8863_shifts[] = {
+	[VLAN_TABLE_MEMBERSHIP_S]	= 16,
+	[STATIC_MAC_FWD_PORTS]		= 16,
+	[STATIC_MAC_FID]		= 22,
+	[DYNAMIC_MAC_ENTRIES_H]		= 8,
+	[DYNAMIC_MAC_ENTRIES]		= 24,
+	[DYNAMIC_MAC_FID]		= 16,
+	[DYNAMIC_MAC_TIMESTAMP]		= 22,
+	[DYNAMIC_MAC_SRC_PORT]		= 20,
+};
+
+static const u16 ksz9477_regs[] = {
+	[P_STP_CTRL]			= 0x0B04,
+	[S_START_CTRL]			= 0x0300,
+	[S_BROADCAST_CTRL]		= 0x0332,
+	[S_MULTICAST_CTRL]		= 0x0331,
+	[P_XMII_CTRL_0]			= 0x0300,
+	[P_XMII_CTRL_1]			= 0x0301,
+};
+
+static const u32 ksz9477_masks[] = {
+	[ALU_STAT_WRITE]		= 0,
+	[ALU_STAT_READ]			= 1,
+	[P_MII_TX_FLOW_CTRL]		= BIT(5),
+	[P_MII_RX_FLOW_CTRL]		= BIT(3),
+};
+
+static const u8 ksz9477_shifts[] = {
+	[ALU_STAT_INDEX]		= 16,
+};
+
+static const u8 ksz9477_xmii_ctrl0[] = {
+	[P_MII_100MBIT]			= 1,
+	[P_MII_10MBIT]			= 0,
+	[P_MII_FULL_DUPLEX]		= 1,
+	[P_MII_HALF_DUPLEX]		= 0,
+};
+
+static const u8 ksz9477_xmii_ctrl1[] = {
+	[P_RGMII_SEL]			= 0,
+	[P_RMII_SEL]			= 1,
+	[P_GMII_SEL]			= 2,
+	[P_MII_SEL]			= 3,
+	[P_GMII_1GBIT]			= 0,
+	[P_GMII_NOT_1GBIT]		= 1,
+};
+
+static const u32 lan937x_masks[] = {
+	[ALU_STAT_WRITE]		= 1,
+	[ALU_STAT_READ]			= 2,
+	[P_MII_TX_FLOW_CTRL]		= BIT(5),
+	[P_MII_RX_FLOW_CTRL]		= BIT(3),
+};
+
+static const u8 lan937x_shifts[] = {
+	[ALU_STAT_INDEX]		= 8,
+};
+
+static const struct regmap_range ksz8563_valid_regs[] = {
+	regmap_reg_range(0x0000, 0x0003),
+	regmap_reg_range(0x0006, 0x0006),
+	regmap_reg_range(0x000f, 0x001f),
+	regmap_reg_range(0x0100, 0x0100),
+	regmap_reg_range(0x0104, 0x0107),
+	regmap_reg_range(0x010d, 0x010d),
+	regmap_reg_range(0x0110, 0x0113),
+	regmap_reg_range(0x0120, 0x012b),
+	regmap_reg_range(0x0201, 0x0201),
+	regmap_reg_range(0x0210, 0x0213),
+	regmap_reg_range(0x0300, 0x0300),
+	regmap_reg_range(0x0302, 0x031b),
+	regmap_reg_range(0x0320, 0x032b),
+	regmap_reg_range(0x0330, 0x0336),
+	regmap_reg_range(0x0338, 0x033e),
+	regmap_reg_range(0x0340, 0x035f),
+	regmap_reg_range(0x0370, 0x0370),
+	regmap_reg_range(0x0378, 0x0378),
+	regmap_reg_range(0x037c, 0x037d),
+	regmap_reg_range(0x0390, 0x0393),
+	regmap_reg_range(0x0400, 0x040e),
+	regmap_reg_range(0x0410, 0x042f),
+	regmap_reg_range(0x0500, 0x0519),
+	regmap_reg_range(0x0520, 0x054b),
+	regmap_reg_range(0x0550, 0x05b3),
+
+	/* port 1 */
+	regmap_reg_range(0x1000, 0x1001),
+	regmap_reg_range(0x1004, 0x100b),
+	regmap_reg_range(0x1013, 0x1013),
+	regmap_reg_range(0x1017, 0x1017),
+	regmap_reg_range(0x101b, 0x101b),
+	regmap_reg_range(0x101f, 0x1021),
+	regmap_reg_range(0x1030, 0x1030),
+	regmap_reg_range(0x1100, 0x1111),
+	regmap_reg_range(0x111a, 0x111d),
+	regmap_reg_range(0x1122, 0x1127),
+	regmap_reg_range(0x112a, 0x112b),
+	regmap_reg_range(0x1136, 0x1139),
+	regmap_reg_range(0x113e, 0x113f),
+	regmap_reg_range(0x1400, 0x1401),
+	regmap_reg_range(0x1403, 0x1403),
+	regmap_reg_range(0x1410, 0x1417),
+	regmap_reg_range(0x1420, 0x1423),
+	regmap_reg_range(0x1500, 0x1507),
+	regmap_reg_range(0x1600, 0x1612),
+	regmap_reg_range(0x1800, 0x180f),
+	regmap_reg_range(0x1900, 0x1907),
+	regmap_reg_range(0x1914, 0x191b),
+	regmap_reg_range(0x1a00, 0x1a03),
+	regmap_reg_range(0x1a04, 0x1a08),
+	regmap_reg_range(0x1b00, 0x1b01),
+	regmap_reg_range(0x1b04, 0x1b04),
+	regmap_reg_range(0x1c00, 0x1c05),
+	regmap_reg_range(0x1c08, 0x1c1b),
+
+	/* port 2 */
+	regmap_reg_range(0x2000, 0x2001),
+	regmap_reg_range(0x2004, 0x200b),
+	regmap_reg_range(0x2013, 0x2013),
+	regmap_reg_range(0x2017, 0x2017),
+	regmap_reg_range(0x201b, 0x201b),
+	regmap_reg_range(0x201f, 0x2021),
+	regmap_reg_range(0x2030, 0x2030),
+	regmap_reg_range(0x2100, 0x2111),
+	regmap_reg_range(0x211a, 0x211d),
+	regmap_reg_range(0x2122, 0x2127),
+	regmap_reg_range(0x212a, 0x212b),
+	regmap_reg_range(0x2136, 0x2139),
+	regmap_reg_range(0x213e, 0x213f),
+	regmap_reg_range(0x2400, 0x2401),
+	regmap_reg_range(0x2403, 0x2403),
+	regmap_reg_range(0x2410, 0x2417),
+	regmap_reg_range(0x2420, 0x2423),
+	regmap_reg_range(0x2500, 0x2507),
+	regmap_reg_range(0x2600, 0x2612),
+	regmap_reg_range(0x2800, 0x280f),
+	regmap_reg_range(0x2900, 0x2907),
+	regmap_reg_range(0x2914, 0x291b),
+	regmap_reg_range(0x2a00, 0x2a03),
+	regmap_reg_range(0x2a04, 0x2a08),
+	regmap_reg_range(0x2b00, 0x2b01),
+	regmap_reg_range(0x2b04, 0x2b04),
+	regmap_reg_range(0x2c00, 0x2c05),
+	regmap_reg_range(0x2c08, 0x2c1b),
+
+	/* port 3 */
+	regmap_reg_range(0x3000, 0x3001),
+	regmap_reg_range(0x3004, 0x300b),
+	regmap_reg_range(0x3013, 0x3013),
+	regmap_reg_range(0x3017, 0x3017),
+	regmap_reg_range(0x301b, 0x301b),
+	regmap_reg_range(0x301f, 0x3021),
+	regmap_reg_range(0x3030, 0x3030),
+	regmap_reg_range(0x3300, 0x3301),
+	regmap_reg_range(0x3303, 0x3303),
+	regmap_reg_range(0x3400, 0x3401),
+	regmap_reg_range(0x3403, 0x3403),
+	regmap_reg_range(0x3410, 0x3417),
+	regmap_reg_range(0x3420, 0x3423),
+	regmap_reg_range(0x3500, 0x3507),
+	regmap_reg_range(0x3600, 0x3612),
+	regmap_reg_range(0x3800, 0x380f),
+	regmap_reg_range(0x3900, 0x3907),
+	regmap_reg_range(0x3914, 0x391b),
+	regmap_reg_range(0x3a00, 0x3a03),
+	regmap_reg_range(0x3a04, 0x3a08),
+	regmap_reg_range(0x3b00, 0x3b01),
+	regmap_reg_range(0x3b04, 0x3b04),
+	regmap_reg_range(0x3c00, 0x3c05),
+	regmap_reg_range(0x3c08, 0x3c1b),
+};
+
+static const struct regmap_access_table ksz8563_register_set = {
+	.yes_ranges = ksz8563_valid_regs,
+	.n_yes_ranges = ARRAY_SIZE(ksz8563_valid_regs),
+};
+
+static const struct regmap_range ksz9477_valid_regs[] = {
+	regmap_reg_range(0x0000, 0x0003),
+	regmap_reg_range(0x0006, 0x0006),
+	regmap_reg_range(0x0010, 0x001f),
+	regmap_reg_range(0x0100, 0x0100),
+	regmap_reg_range(0x0103, 0x0107),
+	regmap_reg_range(0x010d, 0x010d),
+	regmap_reg_range(0x0110, 0x0113),
+	regmap_reg_range(0x0120, 0x012b),
+	regmap_reg_range(0x0201, 0x0201),
+	regmap_reg_range(0x0210, 0x0213),
+	regmap_reg_range(0x0300, 0x0300),
+	regmap_reg_range(0x0302, 0x031b),
+	regmap_reg_range(0x0320, 0x032b),
+	regmap_reg_range(0x0330, 0x0336),
+	regmap_reg_range(0x0338, 0x033b),
+	regmap_reg_range(0x033e, 0x033e),
+	regmap_reg_range(0x0340, 0x035f),
+	regmap_reg_range(0x0370, 0x0370),
+	regmap_reg_range(0x0378, 0x0378),
+	regmap_reg_range(0x037c, 0x037d),
+	regmap_reg_range(0x0390, 0x0393),
+	regmap_reg_range(0x0400, 0x040e),
+	regmap_reg_range(0x0410, 0x042f),
+	regmap_reg_range(0x0444, 0x044b),
+	regmap_reg_range(0x0450, 0x046f),
+	regmap_reg_range(0x0500, 0x0519),
+	regmap_reg_range(0x0520, 0x054b),
+	regmap_reg_range(0x0550, 0x05b3),
+	regmap_reg_range(0x0604, 0x060b),
+	regmap_reg_range(0x0610, 0x0612),
+	regmap_reg_range(0x0614, 0x062c),
+	regmap_reg_range(0x0640, 0x0645),
+	regmap_reg_range(0x0648, 0x064d),
+
+	/* port 1 */
+	regmap_reg_range(0x1000, 0x1001),
+	regmap_reg_range(0x1013, 0x1013),
+	regmap_reg_range(0x1017, 0x1017),
+	regmap_reg_range(0x101b, 0x101b),
+	regmap_reg_range(0x101f, 0x1020),
+	regmap_reg_range(0x1030, 0x1030),
+	regmap_reg_range(0x1100, 0x1115),
+	regmap_reg_range(0x111a, 0x111f),
+	regmap_reg_range(0x1120, 0x112b),
+	regmap_reg_range(0x1134, 0x113b),
+	regmap_reg_range(0x113c, 0x113f),
+	regmap_reg_range(0x1400, 0x1401),
+	regmap_reg_range(0x1403, 0x1403),
+	regmap_reg_range(0x1410, 0x1417),
+	regmap_reg_range(0x1420, 0x1423),
+	regmap_reg_range(0x1500, 0x1507),
+	regmap_reg_range(0x1600, 0x1613),
+	regmap_reg_range(0x1800, 0x180f),
+	regmap_reg_range(0x1820, 0x1827),
+	regmap_reg_range(0x1830, 0x1837),
+	regmap_reg_range(0x1840, 0x184b),
+	regmap_reg_range(0x1900, 0x1907),
+	regmap_reg_range(0x1914, 0x191b),
+	regmap_reg_range(0x1920, 0x1920),
+	regmap_reg_range(0x1923, 0x1927),
+	regmap_reg_range(0x1a00, 0x1a03),
+	regmap_reg_range(0x1a04, 0x1a07),
+	regmap_reg_range(0x1b00, 0x1b01),
+	regmap_reg_range(0x1b04, 0x1b04),
+	regmap_reg_range(0x1c00, 0x1c05),
+	regmap_reg_range(0x1c08, 0x1c1b),
+
+	/* port 2 */
+	regmap_reg_range(0x2000, 0x2001),
+	regmap_reg_range(0x2013, 0x2013),
+	regmap_reg_range(0x2017, 0x2017),
+	regmap_reg_range(0x201b, 0x201b),
+	regmap_reg_range(0x201f, 0x2020),
+	regmap_reg_range(0x2030, 0x2030),
+	regmap_reg_range(0x2100, 0x2115),
+	regmap_reg_range(0x211a, 0x211f),
+	regmap_reg_range(0x2120, 0x212b),
+	regmap_reg_range(0x2134, 0x213b),
+	regmap_reg_range(0x213c, 0x213f),
+	regmap_reg_range(0x2400, 0x2401),
+	regmap_reg_range(0x2403, 0x2403),
+	regmap_reg_range(0x2410, 0x2417),
+	regmap_reg_range(0x2420, 0x2423),
+	regmap_reg_range(0x2500, 0x2507),
+	regmap_reg_range(0x2600, 0x2613),
+	regmap_reg_range(0x2800, 0x280f),
+	regmap_reg_range(0x2820, 0x2827),
+	regmap_reg_range(0x2830, 0x2837),
+	regmap_reg_range(0x2840, 0x284b),
+	regmap_reg_range(0x2900, 0x2907),
+	regmap_reg_range(0x2914, 0x291b),
+	regmap_reg_range(0x2920, 0x2920),
+	regmap_reg_range(0x2923, 0x2927),
+	regmap_reg_range(0x2a00, 0x2a03),
+	regmap_reg_range(0x2a04, 0x2a07),
+	regmap_reg_range(0x2b00, 0x2b01),
+	regmap_reg_range(0x2b04, 0x2b04),
+	regmap_reg_range(0x2c00, 0x2c05),
+	regmap_reg_range(0x2c08, 0x2c1b),
+
+	/* port 3 */
+	regmap_reg_range(0x3000, 0x3001),
+	regmap_reg_range(0x3013, 0x3013),
+	regmap_reg_range(0x3017, 0x3017),
+	regmap_reg_range(0x301b, 0x301b),
+	regmap_reg_range(0x301f, 0x3020),
+	regmap_reg_range(0x3030, 0x3030),
+	regmap_reg_range(0x3100, 0x3115),
+	regmap_reg_range(0x311a, 0x311f),
+	regmap_reg_range(0x3120, 0x312b),
+	regmap_reg_range(0x3134, 0x313b),
+	regmap_reg_range(0x313c, 0x313f),
+	regmap_reg_range(0x3400, 0x3401),
+	regmap_reg_range(0x3403, 0x3403),
+	regmap_reg_range(0x3410, 0x3417),
+	regmap_reg_range(0x3420, 0x3423),
+	regmap_reg_range(0x3500, 0x3507),
+	regmap_reg_range(0x3600, 0x3613),
+	regmap_reg_range(0x3800, 0x380f),
+	regmap_reg_range(0x3820, 0x3827),
+	regmap_reg_range(0x3830, 0x3837),
+	regmap_reg_range(0x3840, 0x384b),
+	regmap_reg_range(0x3900, 0x3907),
+	regmap_reg_range(0x3914, 0x391b),
+	regmap_reg_range(0x3920, 0x3920),
+	regmap_reg_range(0x3923, 0x3927),
+	regmap_reg_range(0x3a00, 0x3a03),
+	regmap_reg_range(0x3a04, 0x3a07),
+	regmap_reg_range(0x3b00, 0x3b01),
+	regmap_reg_range(0x3b04, 0x3b04),
+	regmap_reg_range(0x3c00, 0x3c05),
+	regmap_reg_range(0x3c08, 0x3c1b),
+
+	/* port 4 */
+	regmap_reg_range(0x4000, 0x4001),
+	regmap_reg_range(0x4013, 0x4013),
+	regmap_reg_range(0x4017, 0x4017),
+	regmap_reg_range(0x401b, 0x401b),
+	regmap_reg_range(0x401f, 0x4020),
+	regmap_reg_range(0x4030, 0x4030),
+	regmap_reg_range(0x4100, 0x4115),
+	regmap_reg_range(0x411a, 0x411f),
+	regmap_reg_range(0x4120, 0x412b),
+	regmap_reg_range(0x4134, 0x413b),
+	regmap_reg_range(0x413c, 0x413f),
+	regmap_reg_range(0x4400, 0x4401),
+	regmap_reg_range(0x4403, 0x4403),
+	regmap_reg_range(0x4410, 0x4417),
+	regmap_reg_range(0x4420, 0x4423),
+	regmap_reg_range(0x4500, 0x4507),
+	regmap_reg_range(0x4600, 0x4613),
+	regmap_reg_range(0x4800, 0x480f),
+	regmap_reg_range(0x4820, 0x4827),
+	regmap_reg_range(0x4830, 0x4837),
+	regmap_reg_range(0x4840, 0x484b),
+	regmap_reg_range(0x4900, 0x4907),
+	regmap_reg_range(0x4914, 0x491b),
+	regmap_reg_range(0x4920, 0x4920),
+	regmap_reg_range(0x4923, 0x4927),
+	regmap_reg_range(0x4a00, 0x4a03),
+	regmap_reg_range(0x4a04, 0x4a07),
+	regmap_reg_range(0x4b00, 0x4b01),
+	regmap_reg_range(0x4b04, 0x4b04),
+	regmap_reg_range(0x4c00, 0x4c05),
+	regmap_reg_range(0x4c08, 0x4c1b),
+
+	/* port 5 */
+	regmap_reg_range(0x5000, 0x5001),
+	regmap_reg_range(0x5013, 0x5013),
+	regmap_reg_range(0x5017, 0x5017),
+	regmap_reg_range(0x501b, 0x501b),
+	regmap_reg_range(0x501f, 0x5020),
+	regmap_reg_range(0x5030, 0x5030),
+	regmap_reg_range(0x5100, 0x5115),
+	regmap_reg_range(0x511a, 0x511f),
+	regmap_reg_range(0x5120, 0x512b),
+	regmap_reg_range(0x5134, 0x513b),
+	regmap_reg_range(0x513c, 0x513f),
+	regmap_reg_range(0x5400, 0x5401),
+	regmap_reg_range(0x5403, 0x5403),
+	regmap_reg_range(0x5410, 0x5417),
+	regmap_reg_range(0x5420, 0x5423),
+	regmap_reg_range(0x5500, 0x5507),
+	regmap_reg_range(0x5600, 0x5613),
+	regmap_reg_range(0x5800, 0x580f),
+	regmap_reg_range(0x5820, 0x5827),
+	regmap_reg_range(0x5830, 0x5837),
+	regmap_reg_range(0x5840, 0x584b),
+	regmap_reg_range(0x5900, 0x5907),
+	regmap_reg_range(0x5914, 0x591b),
+	regmap_reg_range(0x5920, 0x5920),
+	regmap_reg_range(0x5923, 0x5927),
+	regmap_reg_range(0x5a00, 0x5a03),
+	regmap_reg_range(0x5a04, 0x5a07),
+	regmap_reg_range(0x5b00, 0x5b01),
+	regmap_reg_range(0x5b04, 0x5b04),
+	regmap_reg_range(0x5c00, 0x5c05),
+	regmap_reg_range(0x5c08, 0x5c1b),
+
+	/* port 6 */
+	regmap_reg_range(0x6000, 0x6001),
+	regmap_reg_range(0x6013, 0x6013),
+	regmap_reg_range(0x6017, 0x6017),
+	regmap_reg_range(0x601b, 0x601b),
+	regmap_reg_range(0x601f, 0x6020),
+	regmap_reg_range(0x6030, 0x6030),
+	regmap_reg_range(0x6300, 0x6301),
+	regmap_reg_range(0x6400, 0x6401),
+	regmap_reg_range(0x6403, 0x6403),
+	regmap_reg_range(0x6410, 0x6417),
+	regmap_reg_range(0x6420, 0x6423),
+	regmap_reg_range(0x6500, 0x6507),
+	regmap_reg_range(0x6600, 0x6613),
+	regmap_reg_range(0x6800, 0x680f),
+	regmap_reg_range(0x6820, 0x6827),
+	regmap_reg_range(0x6830, 0x6837),
+	regmap_reg_range(0x6840, 0x684b),
+	regmap_reg_range(0x6900, 0x6907),
+	regmap_reg_range(0x6914, 0x691b),
+	regmap_reg_range(0x6920, 0x6920),
+	regmap_reg_range(0x6923, 0x6927),
+	regmap_reg_range(0x6a00, 0x6a03),
+	regmap_reg_range(0x6a04, 0x6a07),
+	regmap_reg_range(0x6b00, 0x6b01),
+	regmap_reg_range(0x6b04, 0x6b04),
+	regmap_reg_range(0x6c00, 0x6c05),
+	regmap_reg_range(0x6c08, 0x6c1b),
+
+	/* port 7 */
+	regmap_reg_range(0x7000, 0x7001),
+	regmap_reg_range(0x7013, 0x7013),
+	regmap_reg_range(0x7017, 0x7017),
+	regmap_reg_range(0x701b, 0x701b),
+	regmap_reg_range(0x701f, 0x7020),
+	regmap_reg_range(0x7030, 0x7030),
+	regmap_reg_range(0x7200, 0x7203),
+	regmap_reg_range(0x7206, 0x7207),
+	regmap_reg_range(0x7300, 0x7301),
+	regmap_reg_range(0x7400, 0x7401),
+	regmap_reg_range(0x7403, 0x7403),
+	regmap_reg_range(0x7410, 0x7417),
+	regmap_reg_range(0x7420, 0x7423),
+	regmap_reg_range(0x7500, 0x7507),
+	regmap_reg_range(0x7600, 0x7613),
+	regmap_reg_range(0x7800, 0x780f),
+	regmap_reg_range(0x7820, 0x7827),
+	regmap_reg_range(0x7830, 0x7837),
+	regmap_reg_range(0x7840, 0x784b),
+	regmap_reg_range(0x7900, 0x7907),
+	regmap_reg_range(0x7914, 0x791b),
+	regmap_reg_range(0x7920, 0x7920),
+	regmap_reg_range(0x7923, 0x7927),
+	regmap_reg_range(0x7a00, 0x7a03),
+	regmap_reg_range(0x7a04, 0x7a07),
+	regmap_reg_range(0x7b00, 0x7b01),
+	regmap_reg_range(0x7b04, 0x7b04),
+	regmap_reg_range(0x7c00, 0x7c05),
+	regmap_reg_range(0x7c08, 0x7c1b),
+};
+
+static const struct regmap_access_table ksz9477_register_set = {
+	.yes_ranges = ksz9477_valid_regs,
+	.n_yes_ranges = ARRAY_SIZE(ksz9477_valid_regs),
+};
+
+static const struct regmap_range ksz9896_valid_regs[] = {
+	regmap_reg_range(0x0000, 0x0003),
+	regmap_reg_range(0x0006, 0x0006),
+	regmap_reg_range(0x0010, 0x001f),
+	regmap_reg_range(0x0100, 0x0100),
+	regmap_reg_range(0x0103, 0x0107),
+	regmap_reg_range(0x010d, 0x010d),
+	regmap_reg_range(0x0110, 0x0113),
+	regmap_reg_range(0x0120, 0x0127),
+	regmap_reg_range(0x0201, 0x0201),
+	regmap_reg_range(0x0210, 0x0213),
+	regmap_reg_range(0x0300, 0x0300),
+	regmap_reg_range(0x0302, 0x030b),
+	regmap_reg_range(0x0310, 0x031b),
+	regmap_reg_range(0x0320, 0x032b),
+	regmap_reg_range(0x0330, 0x0336),
+	regmap_reg_range(0x0338, 0x033b),
+	regmap_reg_range(0x033e, 0x033e),
+	regmap_reg_range(0x0340, 0x035f),
+	regmap_reg_range(0x0370, 0x0370),
+	regmap_reg_range(0x0378, 0x0378),
+	regmap_reg_range(0x037c, 0x037d),
+	regmap_reg_range(0x0390, 0x0393),
+	regmap_reg_range(0x0400, 0x040e),
+	regmap_reg_range(0x0410, 0x042f),
+
+	/* port 1 */
+	regmap_reg_range(0x1000, 0x1001),
+	regmap_reg_range(0x1013, 0x1013),
+	regmap_reg_range(0x1017, 0x1017),
+	regmap_reg_range(0x101b, 0x101b),
+	regmap_reg_range(0x101f, 0x1020),
+	regmap_reg_range(0x1030, 0x1030),
+	regmap_reg_range(0x1100, 0x1115),
+	regmap_reg_range(0x111a, 0x111f),
+	regmap_reg_range(0x1122, 0x1127),
+	regmap_reg_range(0x112a, 0x112b),
+	regmap_reg_range(0x1136, 0x1139),
+	regmap_reg_range(0x113e, 0x113f),
+	regmap_reg_range(0x1400, 0x1401),
+	regmap_reg_range(0x1403, 0x1403),
+	regmap_reg_range(0x1410, 0x1417),
+	regmap_reg_range(0x1420, 0x1423),
+	regmap_reg_range(0x1500, 0x1507),
+	regmap_reg_range(0x1600, 0x1612),
+	regmap_reg_range(0x1800, 0x180f),
+	regmap_reg_range(0x1820, 0x1827),
+	regmap_reg_range(0x1830, 0x1837),
+	regmap_reg_range(0x1840, 0x184b),
+	regmap_reg_range(0x1900, 0x1907),
+	regmap_reg_range(0x1914, 0x1915),
+	regmap_reg_range(0x1a00, 0x1a03),
+	regmap_reg_range(0x1a04, 0x1a07),
+	regmap_reg_range(0x1b00, 0x1b01),
+	regmap_reg_range(0x1b04, 0x1b04),
+
+	/* port 2 */
+	regmap_reg_range(0x2000, 0x2001),
+	regmap_reg_range(0x2013, 0x2013),
+	regmap_reg_range(0x2017, 0x2017),
+	regmap_reg_range(0x201b, 0x201b),
+	regmap_reg_range(0x201f, 0x2020),
+	regmap_reg_range(0x2030, 0x2030),
+	regmap_reg_range(0x2100, 0x2115),
+	regmap_reg_range(0x211a, 0x211f),
+	regmap_reg_range(0x2122, 0x2127),
+	regmap_reg_range(0x212a, 0x212b),
+	regmap_reg_range(0x2136, 0x2139),
+	regmap_reg_range(0x213e, 0x213f),
+	regmap_reg_range(0x2400, 0x2401),
+	regmap_reg_range(0x2403, 0x2403),
+	regmap_reg_range(0x2410, 0x2417),
+	regmap_reg_range(0x2420, 0x2423),
+	regmap_reg_range(0x2500, 0x2507),
+	regmap_reg_range(0x2600, 0x2612),
+	regmap_reg_range(0x2800, 0x280f),
+	regmap_reg_range(0x2820, 0x2827),
+	regmap_reg_range(0x2830, 0x2837),
+	regmap_reg_range(0x2840, 0x284b),
+	regmap_reg_range(0x2900, 0x2907),
+	regmap_reg_range(0x2914, 0x2915),
+	regmap_reg_range(0x2a00, 0x2a03),
+	regmap_reg_range(0x2a04, 0x2a07),
+	regmap_reg_range(0x2b00, 0x2b01),
+	regmap_reg_range(0x2b04, 0x2b04),
+
+	/* port 3 */
+	regmap_reg_range(0x3000, 0x3001),
+	regmap_reg_range(0x3013, 0x3013),
+	regmap_reg_range(0x3017, 0x3017),
+	regmap_reg_range(0x301b, 0x301b),
+	regmap_reg_range(0x301f, 0x3020),
+	regmap_reg_range(0x3030, 0x3030),
+	regmap_reg_range(0x3100, 0x3115),
+	regmap_reg_range(0x311a, 0x311f),
+	regmap_reg_range(0x3122, 0x3127),
+	regmap_reg_range(0x312a, 0x312b),
+	regmap_reg_range(0x3136, 0x3139),
+	regmap_reg_range(0x313e, 0x313f),
+	regmap_reg_range(0x3400, 0x3401),
+	regmap_reg_range(0x3403, 0x3403),
+	regmap_reg_range(0x3410, 0x3417),
+	regmap_reg_range(0x3420, 0x3423),
+	regmap_reg_range(0x3500, 0x3507),
+	regmap_reg_range(0x3600, 0x3612),
+	regmap_reg_range(0x3800, 0x380f),
+	regmap_reg_range(0x3820, 0x3827),
+	regmap_reg_range(0x3830, 0x3837),
+	regmap_reg_range(0x3840, 0x384b),
+	regmap_reg_range(0x3900, 0x3907),
+	regmap_reg_range(0x3914, 0x3915),
+	regmap_reg_range(0x3a00, 0x3a03),
+	regmap_reg_range(0x3a04, 0x3a07),
+	regmap_reg_range(0x3b00, 0x3b01),
+	regmap_reg_range(0x3b04, 0x3b04),
+
+	/* port 4 */
+	regmap_reg_range(0x4000, 0x4001),
+	regmap_reg_range(0x4013, 0x4013),
+	regmap_reg_range(0x4017, 0x4017),
+	regmap_reg_range(0x401b, 0x401b),
+	regmap_reg_range(0x401f, 0x4020),
+	regmap_reg_range(0x4030, 0x4030),
+	regmap_reg_range(0x4100, 0x4115),
+	regmap_reg_range(0x411a, 0x411f),
+	regmap_reg_range(0x4122, 0x4127),
+	regmap_reg_range(0x412a, 0x412b),
+	regmap_reg_range(0x4136, 0x4139),
+	regmap_reg_range(0x413e, 0x413f),
+	regmap_reg_range(0x4400, 0x4401),
+	regmap_reg_range(0x4403, 0x4403),
+	regmap_reg_range(0x4410, 0x4417),
+	regmap_reg_range(0x4420, 0x4423),
+	regmap_reg_range(0x4500, 0x4507),
+	regmap_reg_range(0x4600, 0x4612),
+	regmap_reg_range(0x4800, 0x480f),
+	regmap_reg_range(0x4820, 0x4827),
+	regmap_reg_range(0x4830, 0x4837),
+	regmap_reg_range(0x4840, 0x484b),
+	regmap_reg_range(0x4900, 0x4907),
+	regmap_reg_range(0x4914, 0x4915),
+	regmap_reg_range(0x4a00, 0x4a03),
+	regmap_reg_range(0x4a04, 0x4a07),
+	regmap_reg_range(0x4b00, 0x4b01),
+	regmap_reg_range(0x4b04, 0x4b04),
+
+	/* port 5 */
+	regmap_reg_range(0x5000, 0x5001),
+	regmap_reg_range(0x5013, 0x5013),
+	regmap_reg_range(0x5017, 0x5017),
+	regmap_reg_range(0x501b, 0x501b),
+	regmap_reg_range(0x501f, 0x5020),
+	regmap_reg_range(0x5030, 0x5030),
+	regmap_reg_range(0x5100, 0x5115),
+	regmap_reg_range(0x511a, 0x511f),
+	regmap_reg_range(0x5122, 0x5127),
+	regmap_reg_range(0x512a, 0x512b),
+	regmap_reg_range(0x5136, 0x5139),
+	regmap_reg_range(0x513e, 0x513f),
+	regmap_reg_range(0x5400, 0x5401),
+	regmap_reg_range(0x5403, 0x5403),
+	regmap_reg_range(0x5410, 0x5417),
+	regmap_reg_range(0x5420, 0x5423),
+	regmap_reg_range(0x5500, 0x5507),
+	regmap_reg_range(0x5600, 0x5612),
+	regmap_reg_range(0x5800, 0x580f),
+	regmap_reg_range(0x5820, 0x5827),
+	regmap_reg_range(0x5830, 0x5837),
+	regmap_reg_range(0x5840, 0x584b),
+	regmap_reg_range(0x5900, 0x5907),
+	regmap_reg_range(0x5914, 0x5915),
+	regmap_reg_range(0x5a00, 0x5a03),
+	regmap_reg_range(0x5a04, 0x5a07),
+	regmap_reg_range(0x5b00, 0x5b01),
+	regmap_reg_range(0x5b04, 0x5b04),
+
+	/* port 6 */
+	regmap_reg_range(0x6000, 0x6001),
+	regmap_reg_range(0x6013, 0x6013),
+	regmap_reg_range(0x6017, 0x6017),
+	regmap_reg_range(0x601b, 0x601b),
+	regmap_reg_range(0x601f, 0x6020),
+	regmap_reg_range(0x6030, 0x6030),
+	regmap_reg_range(0x6100, 0x6115),
+	regmap_reg_range(0x611a, 0x611f),
+	regmap_reg_range(0x6122, 0x6127),
+	regmap_reg_range(0x612a, 0x612b),
+	regmap_reg_range(0x6136, 0x6139),
+	regmap_reg_range(0x613e, 0x613f),
+	regmap_reg_range(0x6300, 0x6301),
+	regmap_reg_range(0x6400, 0x6401),
+	regmap_reg_range(0x6403, 0x6403),
+	regmap_reg_range(0x6410, 0x6417),
+	regmap_reg_range(0x6420, 0x6423),
+	regmap_reg_range(0x6500, 0x6507),
+	regmap_reg_range(0x6600, 0x6612),
+	regmap_reg_range(0x6800, 0x680f),
+	regmap_reg_range(0x6820, 0x6827),
+	regmap_reg_range(0x6830, 0x6837),
+	regmap_reg_range(0x6840, 0x684b),
+	regmap_reg_range(0x6900, 0x6907),
+	regmap_reg_range(0x6914, 0x6915),
+	regmap_reg_range(0x6a00, 0x6a03),
+	regmap_reg_range(0x6a04, 0x6a07),
+	regmap_reg_range(0x6b00, 0x6b01),
+	regmap_reg_range(0x6b04, 0x6b04),
+};
+
+static const struct regmap_access_table ksz9896_register_set = {
+	.yes_ranges = ksz9896_valid_regs,
+	.n_yes_ranges = ARRAY_SIZE(ksz9896_valid_regs),
+};
+
+const struct ksz_chip_data ksz_switch_chips[] = {
+	[KSZ8563] = {
+		.chip_id = KSZ8563_CHIP_ID,
+		.dev_name = "KSZ8563",
+		.num_vlans = 4096,
+		.num_alus = 4096,
+		.num_statics = 16,
+		.cpu_ports = 0x07,	/* can be configured as cpu port */
+		.port_cnt = 3,		/* total port count */
+		.ops = &ksz9477_dev_ops,
+		.mib_names = ksz9477_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz9477_regs,
+		.masks = ksz9477_masks,
+		.shifts = ksz9477_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */
+		.supports_mii = {false, false, true},
+		.supports_rmii = {false, false, true},
+		.supports_rgmii = {false, false, true},
+		.internal_phy = {true, true, false},
+		.gbit_capable = {false, false, true},
+		.wr_table = &ksz8563_register_set,
+		.rd_table = &ksz8563_register_set,
+	},
+
+	[KSZ8795] = {
+		.chip_id = KSZ8795_CHIP_ID,
+		.dev_name = "KSZ8795",
+		.num_vlans = 4096,
+		.num_alus = 0,
+		.num_statics = 8,
+		.cpu_ports = 0x10,	/* can be configured as cpu port */
+		.port_cnt = 5,		/* total cpu and user ports */
+		.ops = &ksz8_dev_ops,
+		.ksz87xx_eee_link_erratum = true,
+		.mib_names = ksz9477_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz8795_regs,
+		.masks = ksz8795_masks,
+		.shifts = ksz8795_shifts,
+		.xmii_ctrl0 = ksz8795_xmii_ctrl0,
+		.xmii_ctrl1 = ksz8795_xmii_ctrl1,
+		.supports_mii = {false, false, false, false, true},
+		.supports_rmii = {false, false, false, false, true},
+		.supports_rgmii = {false, false, false, false, true},
+		.internal_phy = {true, true, true, true, false},
+	},
+
+	[KSZ8794] = {
+		/* WARNING
+		 * =======
+		 * KSZ8794 is similar to KSZ8795, except the port map
+		 * contains a gap between external and CPU ports, the
+		 * port map is NOT continuous. The per-port register
+		 * map is shifted accordingly too, i.e. registers at
+		 * offset 0x40 are NOT used on KSZ8794 and they ARE
+		 * used on KSZ8795 for external port 3.
+		 *           external  cpu
+		 * KSZ8794   0,1,2      4
+		 * KSZ8795   0,1,2,3    4
+		 * KSZ8765   0,1,2,3    4
+		 * port_cnt is configured as 5, even though it is 4
+		 */
+		.chip_id = KSZ8794_CHIP_ID,
+		.dev_name = "KSZ8794",
+		.num_vlans = 4096,
+		.num_alus = 0,
+		.num_statics = 8,
+		.cpu_ports = 0x10,	/* can be configured as cpu port */
+		.port_cnt = 5,		/* total cpu and user ports */
+		.ops = &ksz8_dev_ops,
+		.ksz87xx_eee_link_erratum = true,
+		.mib_names = ksz9477_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz8795_regs,
+		.masks = ksz8795_masks,
+		.shifts = ksz8795_shifts,
+		.xmii_ctrl0 = ksz8795_xmii_ctrl0,
+		.xmii_ctrl1 = ksz8795_xmii_ctrl1,
+		.supports_mii = {false, false, false, false, true},
+		.supports_rmii = {false, false, false, false, true},
+		.supports_rgmii = {false, false, false, false, true},
+		.internal_phy = {true, true, true, false, false},
+	},
+
+	[KSZ8765] = {
+		.chip_id = KSZ8765_CHIP_ID,
+		.dev_name = "KSZ8765",
+		.num_vlans = 4096,
+		.num_alus = 0,
+		.num_statics = 8,
+		.cpu_ports = 0x10,	/* can be configured as cpu port */
+		.port_cnt = 5,		/* total cpu and user ports */
+		.ops = &ksz8_dev_ops,
+		.ksz87xx_eee_link_erratum = true,
+		.mib_names = ksz9477_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz8795_regs,
+		.masks = ksz8795_masks,
+		.shifts = ksz8795_shifts,
+		.xmii_ctrl0 = ksz8795_xmii_ctrl0,
+		.xmii_ctrl1 = ksz8795_xmii_ctrl1,
+		.supports_mii = {false, false, false, false, true},
+		.supports_rmii = {false, false, false, false, true},
+		.supports_rgmii = {false, false, false, false, true},
+		.internal_phy = {true, true, true, true, false},
+	},
+
+	[KSZ8830] = {
+		.chip_id = KSZ8830_CHIP_ID,
+		.dev_name = "KSZ8863/KSZ8873",
+		.num_vlans = 16,
+		.num_alus = 0,
+		.num_statics = 8,
+		.cpu_ports = 0x4,	/* can be configured as cpu port */
+		.port_cnt = 3,
+		.ops = &ksz8_dev_ops,
+		.mib_names = ksz88xx_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz8863_regs,
+		.masks = ksz8863_masks,
+		.shifts = ksz8863_shifts,
+		.supports_mii = {false, false, true},
+		.supports_rmii = {false, false, true},
+		.internal_phy = {true, true, false},
+	},
+
+	[KSZ9477] = {
+		.chip_id = KSZ9477_CHIP_ID,
+		.dev_name = "KSZ9477",
+		.num_vlans = 4096,
+		.num_alus = 4096,
+		.num_statics = 16,
+		.cpu_ports = 0x7F,	/* can be configured as cpu port */
+		.port_cnt = 7,		/* total physical port count */
+		.port_nirqs = 4,
+		.ops = &ksz9477_dev_ops,
+		.phy_errata_9477 = true,
+		.mib_names = ksz9477_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz9477_regs,
+		.masks = ksz9477_masks,
+		.shifts = ksz9477_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
+		.supports_mii	= {false, false, false, false,
+				   false, true, false},
+		.supports_rmii	= {false, false, false, false,
+				   false, true, false},
+		.supports_rgmii = {false, false, false, false,
+				   false, true, false},
+		.internal_phy	= {true, true, true, true,
+				   true, false, false},
+		.gbit_capable	= {true, true, true, true, true, true, true},
+		.wr_table = &ksz9477_register_set,
+		.rd_table = &ksz9477_register_set,
+	},
+
+	[KSZ9896] = {
+		.chip_id = KSZ9896_CHIP_ID,
+		.dev_name = "KSZ9896",
+		.num_vlans = 4096,
+		.num_alus = 4096,
+		.num_statics = 16,
+		.cpu_ports = 0x3F,	/* can be configured as cpu port */
+		.port_cnt = 6,		/* total physical port count */
+		.port_nirqs = 2,
+		.ops = &ksz9477_dev_ops,
+		.phy_errata_9477 = true,
+		.mib_names = ksz9477_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz9477_regs,
+		.masks = ksz9477_masks,
+		.shifts = ksz9477_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
+		.supports_mii	= {false, false, false, false,
+				   false, true},
+		.supports_rmii	= {false, false, false, false,
+				   false, true},
+		.supports_rgmii = {false, false, false, false,
+				   false, true},
+		.internal_phy	= {true, true, true, true,
+				   true, false},
+		.gbit_capable	= {true, true, true, true, true, true},
+		.wr_table = &ksz9896_register_set,
+		.rd_table = &ksz9896_register_set,
+	},
+
+	[KSZ9897] = {
+		.chip_id = KSZ9897_CHIP_ID,
+		.dev_name = "KSZ9897",
+		.num_vlans = 4096,
+		.num_alus = 4096,
+		.num_statics = 16,
+		.cpu_ports = 0x7F,	/* can be configured as cpu port */
+		.port_cnt = 7,		/* total physical port count */
+		.port_nirqs = 2,
+		.ops = &ksz9477_dev_ops,
+		.phy_errata_9477 = true,
+		.mib_names = ksz9477_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz9477_regs,
+		.masks = ksz9477_masks,
+		.shifts = ksz9477_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
+		.supports_mii	= {false, false, false, false,
+				   false, true, true},
+		.supports_rmii	= {false, false, false, false,
+				   false, true, true},
+		.supports_rgmii = {false, false, false, false,
+				   false, true, true},
+		.internal_phy	= {true, true, true, true,
+				   true, false, false},
+		.gbit_capable	= {true, true, true, true, true, true, true},
+	},
+
+	[KSZ9893] = {
+		.chip_id = KSZ9893_CHIP_ID,
+		.dev_name = "KSZ9893",
+		.num_vlans = 4096,
+		.num_alus = 4096,
+		.num_statics = 16,
+		.cpu_ports = 0x07,	/* can be configured as cpu port */
+		.port_cnt = 3,		/* total port count */
+		.port_nirqs = 2,
+		.ops = &ksz9477_dev_ops,
+		.mib_names = ksz9477_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz9477_regs,
+		.masks = ksz9477_masks,
+		.shifts = ksz9477_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */
+		.supports_mii = {false, false, true},
+		.supports_rmii = {false, false, true},
+		.supports_rgmii = {false, false, true},
+		.internal_phy = {true, true, false},
+		.gbit_capable = {true, true, true},
+	},
+
+	[KSZ9567] = {
+		.chip_id = KSZ9567_CHIP_ID,
+		.dev_name = "KSZ9567",
+		.num_vlans = 4096,
+		.num_alus = 4096,
+		.num_statics = 16,
+		.cpu_ports = 0x7F,	/* can be configured as cpu port */
+		.port_cnt = 7,		/* total physical port count */
+		.port_nirqs = 3,
+		.ops = &ksz9477_dev_ops,
+		.phy_errata_9477 = true,
+		.mib_names = ksz9477_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz9477_regs,
+		.masks = ksz9477_masks,
+		.shifts = ksz9477_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
+		.supports_mii	= {false, false, false, false,
+				   false, true, true},
+		.supports_rmii	= {false, false, false, false,
+				   false, true, true},
+		.supports_rgmii = {false, false, false, false,
+				   false, true, true},
+		.internal_phy	= {true, true, true, true,
+				   true, false, false},
+		.gbit_capable	= {true, true, true, true, true, true, true},
+	},
+
+	[LAN9370] = {
+		.chip_id = LAN9370_CHIP_ID,
+		.dev_name = "LAN9370",
+		.num_vlans = 4096,
+		.num_alus = 1024,
+		.num_statics = 256,
+		.cpu_ports = 0x10,	/* can be configured as cpu port */
+		.port_cnt = 5,		/* total physical port count */
+		.port_nirqs = 6,
+		.ops = &lan937x_dev_ops,
+		.mib_names = ksz9477_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz9477_regs,
+		.masks = lan937x_masks,
+		.shifts = lan937x_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
+		.supports_mii = {false, false, false, false, true},
+		.supports_rmii = {false, false, false, false, true},
+		.supports_rgmii = {false, false, false, false, true},
+		.internal_phy = {true, true, true, true, false},
+	},
+
+	[LAN9371] = {
+		.chip_id = LAN9371_CHIP_ID,
+		.dev_name = "LAN9371",
+		.num_vlans = 4096,
+		.num_alus = 1024,
+		.num_statics = 256,
+		.cpu_ports = 0x30,	/* can be configured as cpu port */
+		.port_cnt = 6,		/* total physical port count */
+		.port_nirqs = 6,
+		.ops = &lan937x_dev_ops,
+		.mib_names = ksz9477_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz9477_regs,
+		.masks = lan937x_masks,
+		.shifts = lan937x_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
+		.supports_mii = {false, false, false, false, true, true},
+		.supports_rmii = {false, false, false, false, true, true},
+		.supports_rgmii = {false, false, false, false, true, true},
+		.internal_phy = {true, true, true, true, false, false},
+	},
+
+	[LAN9372] = {
+		.chip_id = LAN9372_CHIP_ID,
+		.dev_name = "LAN9372",
+		.num_vlans = 4096,
+		.num_alus = 1024,
+		.num_statics = 256,
+		.cpu_ports = 0x30,	/* can be configured as cpu port */
+		.port_cnt = 8,		/* total physical port count */
+		.port_nirqs = 6,
+		.ops = &lan937x_dev_ops,
+		.mib_names = ksz9477_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz9477_regs,
+		.masks = lan937x_masks,
+		.shifts = lan937x_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
+		.supports_mii	= {false, false, false, false,
+				   true, true, false, false},
+		.supports_rmii	= {false, false, false, false,
+				   true, true, false, false},
+		.supports_rgmii = {false, false, false, false,
+				   true, true, false, false},
+		.internal_phy	= {true, true, true, true,
+				   false, false, true, true},
+	},
+
+	[LAN9373] = {
+		.chip_id = LAN9373_CHIP_ID,
+		.dev_name = "LAN9373",
+		.num_vlans = 4096,
+		.num_alus = 1024,
+		.num_statics = 256,
+		.cpu_ports = 0x38,	/* can be configured as cpu port */
+		.port_cnt = 5,		/* total physical port count */
+		.port_nirqs = 6,
+		.ops = &lan937x_dev_ops,
+		.mib_names = ksz9477_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz9477_regs,
+		.masks = lan937x_masks,
+		.shifts = lan937x_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
+		.supports_mii	= {false, false, false, false,
+				   true, true, false, false},
+		.supports_rmii	= {false, false, false, false,
+				   true, true, false, false},
+		.supports_rgmii = {false, false, false, false,
+				   true, true, false, false},
+		.internal_phy	= {true, true, true, false,
+				   false, false, true, true},
+	},
+
+	[LAN9374] = {
+		.chip_id = LAN9374_CHIP_ID,
+		.dev_name = "LAN9374",
+		.num_vlans = 4096,
+		.num_alus = 1024,
+		.num_statics = 256,
+		.cpu_ports = 0x30,	/* can be configured as cpu port */
+		.port_cnt = 8,		/* total physical port count */
+		.port_nirqs = 6,
+		.ops = &lan937x_dev_ops,
+		.mib_names = ksz9477_mib_names,
+		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+		.reg_mib_cnt = MIB_COUNTER_NUM,
+		.regs = ksz9477_regs,
+		.masks = lan937x_masks,
+		.shifts = lan937x_shifts,
+		.xmii_ctrl0 = ksz9477_xmii_ctrl0,
+		.xmii_ctrl1 = ksz9477_xmii_ctrl1,
+		.supports_mii	= {false, false, false, false,
+				   true, true, false, false},
+		.supports_rmii	= {false, false, false, false,
+				   true, true, false, false},
+		.supports_rgmii = {false, false, false, false,
+				   true, true, false, false},
+		.internal_phy	= {true, true, true, true,
+				   false, false, true, true},
+	},
+};
+EXPORT_SYMBOL_GPL(ksz_switch_chips);
+
+static const struct ksz_chip_data *ksz_lookup_info(unsigned int prod_num)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) {
+		const struct ksz_chip_data *chip = &ksz_switch_chips[i];
+
+		if (chip->chip_id == prod_num)
+			return chip;
+	}
+
+	return NULL;
+}
+
+static int ksz_check_device_id(struct ksz_device *dev)
+{
+	const struct ksz_chip_data *dt_chip_data;
+
+	dt_chip_data = of_device_get_match_data(dev->dev);
+
+	/* Check for Device Tree and Chip ID */
+	if (dt_chip_data->chip_id != dev->chip_id) {
+		dev_err(dev->dev,
+			"Device tree specifies chip %s but found %s, please fix it!\n",
+			dt_chip_data->dev_name, dev->info->dev_name);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void ksz_phylink_get_caps(struct dsa_switch *ds, int port,
+				 struct phylink_config *config)
+{
+	struct ksz_device *dev = ds->priv;
+
+	config->legacy_pre_march2020 = false;
+
+	if (dev->info->supports_mii[port])
+		__set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
+
+	if (dev->info->supports_rmii[port])
+		__set_bit(PHY_INTERFACE_MODE_RMII,
+			  config->supported_interfaces);
+
+	if (dev->info->supports_rgmii[port])
+		phy_interface_set_rgmii(config->supported_interfaces);
+
+	if (dev->info->internal_phy[port]) {
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+			  config->supported_interfaces);
+		/* Compatibility for phylib's default interface type when the
+		 * phy-mode property is absent
+		 */
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+	}
+
+	if (dev->dev_ops->get_caps)
+		dev->dev_ops->get_caps(dev, port, config);
+}
+
+void ksz_r_mib_stats64(struct ksz_device *dev, int port)
+{
+	struct ethtool_pause_stats *pstats;
+	struct rtnl_link_stats64 *stats;
+	struct ksz_stats_raw *raw;
+	struct ksz_port_mib *mib;
+
+	mib = &dev->ports[port].mib;
+	stats = &mib->stats64;
+	pstats = &mib->pause_stats;
+	raw = (struct ksz_stats_raw *)mib->counters;
+
+	spin_lock(&mib->stats64_lock);
+
+	stats->rx_packets = raw->rx_bcast + raw->rx_mcast + raw->rx_ucast +
+		raw->rx_pause;
+	stats->tx_packets = raw->tx_bcast + raw->tx_mcast + raw->tx_ucast +
+		raw->tx_pause;
+
+	/* HW counters are counting bytes + FCS which is not acceptable
+	 * for rtnl_link_stats64 interface
+	 */
+	stats->rx_bytes = raw->rx_total - stats->rx_packets * ETH_FCS_LEN;
+	stats->tx_bytes = raw->tx_total - stats->tx_packets * ETH_FCS_LEN;
+
+	stats->rx_length_errors = raw->rx_undersize + raw->rx_fragments +
+		raw->rx_oversize;
+
+	stats->rx_crc_errors = raw->rx_crc_err;
+	stats->rx_frame_errors = raw->rx_align_err;
+	stats->rx_dropped = raw->rx_discards;
+	stats->rx_errors = stats->rx_length_errors + stats->rx_crc_errors +
+		stats->rx_frame_errors  + stats->rx_dropped;
+
+	stats->tx_window_errors = raw->tx_late_col;
+	stats->tx_fifo_errors = raw->tx_discards;
+	stats->tx_aborted_errors = raw->tx_exc_col;
+	stats->tx_errors = stats->tx_window_errors + stats->tx_fifo_errors +
+		stats->tx_aborted_errors;
+
+	stats->multicast = raw->rx_mcast;
+	stats->collisions = raw->tx_total_col;
+
+	pstats->tx_pause_frames = raw->tx_pause;
+	pstats->rx_pause_frames = raw->rx_pause;
+
+	spin_unlock(&mib->stats64_lock);
+}
+
+static void ksz_get_stats64(struct dsa_switch *ds, int port,
+			    struct rtnl_link_stats64 *s)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port_mib *mib;
+
+	mib = &dev->ports[port].mib;
+
+	spin_lock(&mib->stats64_lock);
+	memcpy(s, &mib->stats64, sizeof(*s));
+	spin_unlock(&mib->stats64_lock);
+}
+
+static void ksz_get_pause_stats(struct dsa_switch *ds, int port,
+				struct ethtool_pause_stats *pause_stats)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port_mib *mib;
+
+	mib = &dev->ports[port].mib;
+
+	spin_lock(&mib->stats64_lock);
+	memcpy(pause_stats, &mib->pause_stats, sizeof(*pause_stats));
+	spin_unlock(&mib->stats64_lock);
+}
+
+static void ksz_get_strings(struct dsa_switch *ds, int port,
+			    u32 stringset, uint8_t *buf)
+{
+	struct ksz_device *dev = ds->priv;
+	int i;
+
+	if (stringset != ETH_SS_STATS)
+		return;
+
+	for (i = 0; i < dev->info->mib_cnt; i++) {
+		memcpy(buf + i * ETH_GSTRING_LEN,
+		       dev->info->mib_names[i].string, ETH_GSTRING_LEN);
+	}
+}
+
+static void ksz_update_port_member(struct ksz_device *dev, int port)
+{
+	struct ksz_port *p = &dev->ports[port];
+	struct dsa_switch *ds = dev->ds;
+	u8 port_member = 0, cpu_port;
+	const struct dsa_port *dp;
+	int i, j;
+
+	if (!dsa_is_user_port(ds, port))
+		return;
+
+	dp = dsa_to_port(ds, port);
+	cpu_port = BIT(dsa_upstream_port(ds, port));
+
+	for (i = 0; i < ds->num_ports; i++) {
+		const struct dsa_port *other_dp = dsa_to_port(ds, i);
+		struct ksz_port *other_p = &dev->ports[i];
+		u8 val = 0;
+
+		if (!dsa_is_user_port(ds, i))
+			continue;
+		if (port == i)
+			continue;
+		if (!dsa_port_bridge_same(dp, other_dp))
+			continue;
+		if (other_p->stp_state != BR_STATE_FORWARDING)
+			continue;
+
+		if (p->stp_state == BR_STATE_FORWARDING) {
+			val |= BIT(port);
+			port_member |= BIT(i);
+		}
+
+		/* Retain port [i]'s relationship to other ports than [port] */
+		for (j = 0; j < ds->num_ports; j++) {
+			const struct dsa_port *third_dp;
+			struct ksz_port *third_p;
+
+			if (j == i)
+				continue;
+			if (j == port)
+				continue;
+			if (!dsa_is_user_port(ds, j))
+				continue;
+			third_p = &dev->ports[j];
+			if (third_p->stp_state != BR_STATE_FORWARDING)
+				continue;
+			third_dp = dsa_to_port(ds, j);
+			if (dsa_port_bridge_same(other_dp, third_dp))
+				val |= BIT(j);
+		}
+
+		dev->dev_ops->cfg_port_member(dev, i, val | cpu_port);
+	}
+
+	dev->dev_ops->cfg_port_member(dev, port, port_member | cpu_port);
+}
+
+static int ksz_sw_mdio_read(struct mii_bus *bus, int addr, int regnum)
+{
+	struct ksz_device *dev = bus->priv;
+	u16 val;
+	int ret;
+
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	ret = dev->dev_ops->r_phy(dev, addr, regnum, &val);
+	if (ret < 0)
+		return ret;
+
+	return val;
+}
+
+static int ksz_sw_mdio_write(struct mii_bus *bus, int addr, int regnum,
+			     u16 val)
+{
+	struct ksz_device *dev = bus->priv;
+
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
+
+	return dev->dev_ops->w_phy(dev, addr, regnum, val);
+}
+
+static int ksz_irq_phy_setup(struct ksz_device *dev)
+{
+	struct dsa_switch *ds = dev->ds;
+	int phy;
+	int irq;
+	int ret;
+
+	for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++) {
+		if (BIT(phy) & ds->phys_mii_mask) {
+			irq = irq_find_mapping(dev->ports[phy].pirq.domain,
+					       PORT_SRC_PHY_INT);
+			if (irq < 0) {
+				ret = irq;
+				goto out;
+			}
+			ds->slave_mii_bus->irq[phy] = irq;
+		}
+	}
+	return 0;
+out:
+	while (phy--)
+		if (BIT(phy) & ds->phys_mii_mask)
+			irq_dispose_mapping(ds->slave_mii_bus->irq[phy]);
+
+	return ret;
+}
+
+static void ksz_irq_phy_free(struct ksz_device *dev)
+{
+	struct dsa_switch *ds = dev->ds;
+	int phy;
+
+	for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++)
+		if (BIT(phy) & ds->phys_mii_mask)
+			irq_dispose_mapping(ds->slave_mii_bus->irq[phy]);
+}
+
+static int ksz_mdio_register(struct ksz_device *dev)
+{
+	struct dsa_switch *ds = dev->ds;
+	struct device_node *mdio_np;
+	struct mii_bus *bus;
+	int ret;
+
+	mdio_np = of_get_child_by_name(dev->dev->of_node, "mdio");
+	if (!mdio_np)
+		return 0;
+
+	bus = devm_mdiobus_alloc(ds->dev);
+	if (!bus) {
+		of_node_put(mdio_np);
+		return -ENOMEM;
+	}
+
+	bus->priv = dev;
+	bus->read = ksz_sw_mdio_read;
+	bus->write = ksz_sw_mdio_write;
+	bus->name = "ksz slave smi";
+	snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index);
+	bus->parent = ds->dev;
+	bus->phy_mask = ~ds->phys_mii_mask;
+
+	ds->slave_mii_bus = bus;
+
+	if (dev->irq > 0) {
+		ret = ksz_irq_phy_setup(dev);
+		if (ret) {
+			of_node_put(mdio_np);
+			return ret;
+		}
+	}
+
+	ret = devm_of_mdiobus_register(ds->dev, bus, mdio_np);
+	if (ret) {
+		dev_err(ds->dev, "unable to register MDIO bus %s\n",
+			bus->id);
+		if (dev->irq > 0)
+			ksz_irq_phy_free(dev);
+	}
+
+	of_node_put(mdio_np);
+
+	return ret;
+}
+
+static void ksz_irq_mask(struct irq_data *d)
+{
+	struct ksz_irq *kirq = irq_data_get_irq_chip_data(d);
+
+	kirq->masked |= BIT(d->hwirq);
+}
+
+static void ksz_irq_unmask(struct irq_data *d)
+{
+	struct ksz_irq *kirq = irq_data_get_irq_chip_data(d);
+
+	kirq->masked &= ~BIT(d->hwirq);
+}
+
+static void ksz_irq_bus_lock(struct irq_data *d)
+{
+	struct ksz_irq *kirq  = irq_data_get_irq_chip_data(d);
+
+	mutex_lock(&kirq->dev->lock_irq);
+}
+
+static void ksz_irq_bus_sync_unlock(struct irq_data *d)
+{
+	struct ksz_irq *kirq  = irq_data_get_irq_chip_data(d);
+	struct ksz_device *dev = kirq->dev;
+	int ret;
+
+	ret = ksz_write32(dev, kirq->reg_mask, kirq->masked);
+	if (ret)
+		dev_err(dev->dev, "failed to change IRQ mask\n");
+
+	mutex_unlock(&dev->lock_irq);
+}
+
+static const struct irq_chip ksz_irq_chip = {
+	.name			= "ksz-irq",
+	.irq_mask		= ksz_irq_mask,
+	.irq_unmask		= ksz_irq_unmask,
+	.irq_bus_lock		= ksz_irq_bus_lock,
+	.irq_bus_sync_unlock	= ksz_irq_bus_sync_unlock,
+};
+
+static int ksz_irq_domain_map(struct irq_domain *d,
+			      unsigned int irq, irq_hw_number_t hwirq)
+{
+	irq_set_chip_data(irq, d->host_data);
+	irq_set_chip_and_handler(irq, &ksz_irq_chip, handle_level_irq);
+	irq_set_noprobe(irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops ksz_irq_domain_ops = {
+	.map	= ksz_irq_domain_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+static void ksz_irq_free(struct ksz_irq *kirq)
+{
+	int irq, virq;
+
+	free_irq(kirq->irq_num, kirq);
+
+	for (irq = 0; irq < kirq->nirqs; irq++) {
+		virq = irq_find_mapping(kirq->domain, irq);
+		irq_dispose_mapping(virq);
+	}
+
+	irq_domain_remove(kirq->domain);
+}
+
+static irqreturn_t ksz_irq_thread_fn(int irq, void *dev_id)
+{
+	struct ksz_irq *kirq = dev_id;
+	unsigned int nhandled = 0;
+	struct ksz_device *dev;
+	unsigned int sub_irq;
+	u8 data;
+	int ret;
+	u8 n;
+
+	dev = kirq->dev;
+
+	/* Read interrupt status register */
+	ret = ksz_read8(dev, kirq->reg_status, &data);
+	if (ret)
+		goto out;
+
+	for (n = 0; n < kirq->nirqs; ++n) {
+		if (data & BIT(n)) {
+			sub_irq = irq_find_mapping(kirq->domain, n);
+			handle_nested_irq(sub_irq);
+			++nhandled;
+		}
+	}
+out:
+	return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE);
+}
+
+static int ksz_irq_common_setup(struct ksz_device *dev, struct ksz_irq *kirq)
+{
+	int ret, n;
+
+	kirq->dev = dev;
+	kirq->masked = ~0;
+
+	kirq->domain = irq_domain_add_simple(dev->dev->of_node, kirq->nirqs, 0,
+					     &ksz_irq_domain_ops, kirq);
+	if (!kirq->domain)
+		return -ENOMEM;
+
+	for (n = 0; n < kirq->nirqs; n++)
+		irq_create_mapping(kirq->domain, n);
+
+	ret = request_threaded_irq(kirq->irq_num, NULL, ksz_irq_thread_fn,
+				   IRQF_ONESHOT, kirq->name, kirq);
+	if (ret)
+		goto out;
+
+	return 0;
+
+out:
+	ksz_irq_free(kirq);
+
+	return ret;
+}
+
+static int ksz_girq_setup(struct ksz_device *dev)
+{
+	struct ksz_irq *girq = &dev->girq;
+
+	girq->nirqs = dev->info->port_cnt;
+	girq->reg_mask = REG_SW_PORT_INT_MASK__1;
+	girq->reg_status = REG_SW_PORT_INT_STATUS__1;
+	snprintf(girq->name, sizeof(girq->name), "global_port_irq");
+
+	girq->irq_num = dev->irq;
+
+	return ksz_irq_common_setup(dev, girq);
+}
+
+static int ksz_pirq_setup(struct ksz_device *dev, u8 p)
+{
+	struct ksz_irq *pirq = &dev->ports[p].pirq;
+
+	pirq->nirqs = dev->info->port_nirqs;
+	pirq->reg_mask = dev->dev_ops->get_port_addr(p, REG_PORT_INT_MASK);
+	pirq->reg_status = dev->dev_ops->get_port_addr(p, REG_PORT_INT_STATUS);
+	snprintf(pirq->name, sizeof(pirq->name), "port_irq-%d", p);
+
+	pirq->irq_num = irq_find_mapping(dev->girq.domain, p);
+	if (pirq->irq_num < 0)
+		return pirq->irq_num;
+
+	return ksz_irq_common_setup(dev, pirq);
+}
+
+static int ksz_setup(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	struct dsa_port *dp;
+	struct ksz_port *p;
+	const u16 *regs;
+	int ret;
+
+	regs = dev->info->regs;
+
+	dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
+				       dev->info->num_vlans, GFP_KERNEL);
+	if (!dev->vlan_cache)
+		return -ENOMEM;
+
+	ret = dev->dev_ops->reset(dev);
+	if (ret) {
+		dev_err(ds->dev, "failed to reset switch\n");
+		return ret;
+	}
+
+	/* set broadcast storm protection 10% rate */
+	regmap_update_bits(dev->regmap[1], regs[S_BROADCAST_CTRL],
+			   BROADCAST_STORM_RATE,
+			   (BROADCAST_STORM_VALUE *
+			   BROADCAST_STORM_PROT_RATE) / 100);
+
+	dev->dev_ops->config_cpu_port(ds);
+
+	dev->dev_ops->enable_stp_addr(dev);
+
+	regmap_update_bits(dev->regmap[0], regs[S_MULTICAST_CTRL],
+			   MULTICAST_STORM_DISABLE, MULTICAST_STORM_DISABLE);
+
+	ksz_init_mib_timer(dev);
+
+	ds->configure_vlan_while_not_filtering = false;
+
+	if (dev->dev_ops->setup) {
+		ret = dev->dev_ops->setup(ds);
+		if (ret)
+			return ret;
+	}
+
+	/* Start with learning disabled on standalone user ports, and enabled
+	 * on the CPU port. In lack of other finer mechanisms, learning on the
+	 * CPU port will avoid flooding bridge local addresses on the network
+	 * in some cases.
+	 */
+	p = &dev->ports[dev->cpu_port];
+	p->learning = true;
+
+	if (dev->irq > 0) {
+		ret = ksz_girq_setup(dev);
+		if (ret)
+			return ret;
+
+		dsa_switch_for_each_user_port(dp, dev->ds) {
+			ret = ksz_pirq_setup(dev, dp->index);
+			if (ret)
+				goto out_girq;
+		}
+	}
+
+	ret = ksz_mdio_register(dev);
+	if (ret < 0) {
+		dev_err(dev->dev, "failed to register the mdio");
+		goto out_pirq;
+	}
+
+	/* start switch */
+	regmap_update_bits(dev->regmap[0], regs[S_START_CTRL],
+			   SW_START, SW_START);
+
+	return 0;
+
+out_pirq:
+	if (dev->irq > 0)
+		dsa_switch_for_each_user_port(dp, dev->ds)
+			ksz_irq_free(&dev->ports[dp->index].pirq);
+out_girq:
+	if (dev->irq > 0)
+		ksz_irq_free(&dev->girq);
+
+	return ret;
+}
+
+static void ksz_teardown(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	struct dsa_port *dp;
+
+	if (dev->irq > 0) {
+		dsa_switch_for_each_user_port(dp, dev->ds)
+			ksz_irq_free(&dev->ports[dp->index].pirq);
+
+		ksz_irq_free(&dev->girq);
+	}
+
+	if (dev->dev_ops->teardown)
+		dev->dev_ops->teardown(ds);
+}
+
+static void port_r_cnt(struct ksz_device *dev, int port)
+{
+	struct ksz_port_mib *mib = &dev->ports[port].mib;
+	u64 *dropped;
+
+	/* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */
+	while (mib->cnt_ptr < dev->info->reg_mib_cnt) {
+		dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr,
+					&mib->counters[mib->cnt_ptr]);
+		++mib->cnt_ptr;
+	}
+
+	/* last one in storage */
+	dropped = &mib->counters[dev->info->mib_cnt];
+
+	/* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */
+	while (mib->cnt_ptr < dev->info->mib_cnt) {
+		dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr,
+					dropped, &mib->counters[mib->cnt_ptr]);
+		++mib->cnt_ptr;
+	}
+	mib->cnt_ptr = 0;
+}
+
+static void ksz_mib_read_work(struct work_struct *work)
+{
+	struct ksz_device *dev = container_of(work, struct ksz_device,
+					      mib_read.work);
+	struct ksz_port_mib *mib;
+	struct ksz_port *p;
+	int i;
+
+	for (i = 0; i < dev->info->port_cnt; i++) {
+		if (dsa_is_unused_port(dev->ds, i))
+			continue;
+
+		p = &dev->ports[i];
+		mib = &p->mib;
+		mutex_lock(&mib->cnt_mutex);
+
+		/* Only read MIB counters when the port is told to do.
+		 * If not, read only dropped counters when link is not up.
+		 */
+		if (!p->read) {
+			const struct dsa_port *dp = dsa_to_port(dev->ds, i);
+
+			if (!netif_carrier_ok(dp->slave))
+				mib->cnt_ptr = dev->info->reg_mib_cnt;
+		}
+		port_r_cnt(dev, i);
+		p->read = false;
+
+		if (dev->dev_ops->r_mib_stat64)
+			dev->dev_ops->r_mib_stat64(dev, i);
+
+		mutex_unlock(&mib->cnt_mutex);
+	}
+
+	schedule_delayed_work(&dev->mib_read, dev->mib_read_interval);
+}
+
+void ksz_init_mib_timer(struct ksz_device *dev)
+{
+	int i;
+
+	INIT_DELAYED_WORK(&dev->mib_read, ksz_mib_read_work);
+
+	for (i = 0; i < dev->info->port_cnt; i++) {
+		struct ksz_port_mib *mib = &dev->ports[i].mib;
+
+		dev->dev_ops->port_init_cnt(dev, i);
+
+		mib->cnt_ptr = 0;
+		memset(mib->counters, 0, dev->info->mib_cnt * sizeof(u64));
+	}
+}
+
+static int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg)
+{
+	struct ksz_device *dev = ds->priv;
+	u16 val = 0xffff;
+	int ret;
+
+	ret = dev->dev_ops->r_phy(dev, addr, reg, &val);
+	if (ret)
+		return ret;
+
+	return val;
+}
+
+static int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
+{
+	struct ksz_device *dev = ds->priv;
+	int ret;
+
+	ret = dev->dev_ops->w_phy(dev, addr, reg, val);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (dev->chip_id == KSZ8830_CHIP_ID) {
+		/* Silicon Errata Sheet (DS80000830A):
+		 * Port 1 does not work with LinkMD Cable-Testing.
+		 * Port 1 does not respond to received PAUSE control frames.
+		 */
+		if (!port)
+			return MICREL_KSZ8_P1_ERRATA;
+	}
+
+	return 0;
+}
+
+static void ksz_mac_link_down(struct dsa_switch *ds, int port,
+			      unsigned int mode, phy_interface_t interface)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port *p = &dev->ports[port];
+
+	/* Read all MIB counters when the link is going down. */
+	p->read = true;
+	/* timer started */
+	if (dev->mib_read_interval)
+		schedule_delayed_work(&dev->mib_read, 0);
+}
+
+static int ksz_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (sset != ETH_SS_STATS)
+		return 0;
+
+	return dev->info->mib_cnt;
+}
+
+static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
+				  uint64_t *buf)
+{
+	const struct dsa_port *dp = dsa_to_port(ds, port);
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port_mib *mib;
+
+	mib = &dev->ports[port].mib;
+	mutex_lock(&mib->cnt_mutex);
+
+	/* Only read dropped counters if no link. */
+	if (!netif_carrier_ok(dp->slave))
+		mib->cnt_ptr = dev->info->reg_mib_cnt;
+	port_r_cnt(dev, port);
+	memcpy(buf, mib->counters, dev->info->mib_cnt * sizeof(u64));
+	mutex_unlock(&mib->cnt_mutex);
+}
+
+static int ksz_port_bridge_join(struct dsa_switch *ds, int port,
+				struct dsa_bridge bridge,
+				bool *tx_fwd_offload,
+				struct netlink_ext_ack *extack)
+{
+	/* port_stp_state_set() will be called after to put the port in
+	 * appropriate state so there is no need to do anything.
+	 */
+
+	return 0;
+}
+
+static void ksz_port_bridge_leave(struct dsa_switch *ds, int port,
+				  struct dsa_bridge bridge)
+{
+	/* port_stp_state_set() will be called after to put the port in
+	 * forwarding state so there is no need to do anything.
+	 */
+}
+
+static void ksz_port_fast_age(struct dsa_switch *ds, int port)
+{
+	struct ksz_device *dev = ds->priv;
+
+	dev->dev_ops->flush_dyn_mac_table(dev, port);
+}
+
+static int ksz_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (!dev->dev_ops->set_ageing_time)
+		return -EOPNOTSUPP;
+
+	return dev->dev_ops->set_ageing_time(dev, msecs);
+}
+
+static int ksz_port_fdb_add(struct dsa_switch *ds, int port,
+			    const unsigned char *addr, u16 vid,
+			    struct dsa_db db)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (!dev->dev_ops->fdb_add)
+		return -EOPNOTSUPP;
+
+	return dev->dev_ops->fdb_add(dev, port, addr, vid, db);
+}
+
+static int ksz_port_fdb_del(struct dsa_switch *ds, int port,
+			    const unsigned char *addr,
+			    u16 vid, struct dsa_db db)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (!dev->dev_ops->fdb_del)
+		return -EOPNOTSUPP;
+
+	return dev->dev_ops->fdb_del(dev, port, addr, vid, db);
+}
+
+static int ksz_port_fdb_dump(struct dsa_switch *ds, int port,
+			     dsa_fdb_dump_cb_t *cb, void *data)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (!dev->dev_ops->fdb_dump)
+		return -EOPNOTSUPP;
+
+	return dev->dev_ops->fdb_dump(dev, port, cb, data);
+}
+
+static int ksz_port_mdb_add(struct dsa_switch *ds, int port,
+			    const struct switchdev_obj_port_mdb *mdb,
+			    struct dsa_db db)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (!dev->dev_ops->mdb_add)
+		return -EOPNOTSUPP;
+
+	return dev->dev_ops->mdb_add(dev, port, mdb, db);
+}
+
+static int ksz_port_mdb_del(struct dsa_switch *ds, int port,
+			    const struct switchdev_obj_port_mdb *mdb,
+			    struct dsa_db db)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (!dev->dev_ops->mdb_del)
+		return -EOPNOTSUPP;
+
+	return dev->dev_ops->mdb_del(dev, port, mdb, db);
+}
+
+static int ksz_enable_port(struct dsa_switch *ds, int port,
+			   struct phy_device *phy)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (!dsa_is_user_port(ds, port))
+		return 0;
+
+	/* setup slave port */
+	dev->dev_ops->port_setup(dev, port, false);
+
+	/* port_stp_state_set() will be called after to enable the port so
+	 * there is no need to do anything.
+	 */
+
+	return 0;
+}
+
+void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port *p;
+	const u16 *regs;
+	u8 data;
+
+	regs = dev->info->regs;
+
+	ksz_pread8(dev, port, regs[P_STP_CTRL], &data);
+	data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+
+	p = &dev->ports[port];
+
+	switch (state) {
+	case BR_STATE_DISABLED:
+		data |= PORT_LEARN_DISABLE;
+		break;
+	case BR_STATE_LISTENING:
+		data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+		break;
+	case BR_STATE_LEARNING:
+		data |= PORT_RX_ENABLE;
+		if (!p->learning)
+			data |= PORT_LEARN_DISABLE;
+		break;
+	case BR_STATE_FORWARDING:
+		data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+		if (!p->learning)
+			data |= PORT_LEARN_DISABLE;
+		break;
+	case BR_STATE_BLOCKING:
+		data |= PORT_LEARN_DISABLE;
+		break;
+	default:
+		dev_err(ds->dev, "invalid STP state: %d\n", state);
+		return;
+	}
+
+	ksz_pwrite8(dev, port, regs[P_STP_CTRL], data);
+
+	p->stp_state = state;
+
+	ksz_update_port_member(dev, port);
+}
+
+static int ksz_port_pre_bridge_flags(struct dsa_switch *ds, int port,
+				     struct switchdev_brport_flags flags,
+				     struct netlink_ext_ack *extack)
+{
+	if (flags.mask & ~BR_LEARNING)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int ksz_port_bridge_flags(struct dsa_switch *ds, int port,
+				 struct switchdev_brport_flags flags,
+				 struct netlink_ext_ack *extack)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port *p = &dev->ports[port];
+
+	if (flags.mask & BR_LEARNING) {
+		p->learning = !!(flags.val & BR_LEARNING);
+
+		/* Make the change take effect immediately */
+		ksz_port_stp_state_set(ds, port, p->stp_state);
+	}
+
+	return 0;
+}
+
+static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds,
+						  int port,
+						  enum dsa_tag_protocol mp)
+{
+	struct ksz_device *dev = ds->priv;
+	enum dsa_tag_protocol proto = DSA_TAG_PROTO_NONE;
+
+	if (dev->chip_id == KSZ8795_CHIP_ID ||
+	    dev->chip_id == KSZ8794_CHIP_ID ||
+	    dev->chip_id == KSZ8765_CHIP_ID)
+		proto = DSA_TAG_PROTO_KSZ8795;
+
+	if (dev->chip_id == KSZ8830_CHIP_ID ||
+	    dev->chip_id == KSZ8563_CHIP_ID ||
+	    dev->chip_id == KSZ9893_CHIP_ID)
+		proto = DSA_TAG_PROTO_KSZ9893;
+
+	if (dev->chip_id == KSZ9477_CHIP_ID ||
+	    dev->chip_id == KSZ9896_CHIP_ID ||
+	    dev->chip_id == KSZ9897_CHIP_ID ||
+	    dev->chip_id == KSZ9567_CHIP_ID)
+		proto = DSA_TAG_PROTO_KSZ9477;
+
+	if (is_lan937x(dev))
+		proto = DSA_TAG_PROTO_LAN937X_VALUE;
+
+	return proto;
+}
+
+static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port,
+				   bool flag, struct netlink_ext_ack *extack)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (!dev->dev_ops->vlan_filtering)
+		return -EOPNOTSUPP;
+
+	return dev->dev_ops->vlan_filtering(dev, port, flag, extack);
+}
+
+static int ksz_port_vlan_add(struct dsa_switch *ds, int port,
+			     const struct switchdev_obj_port_vlan *vlan,
+			     struct netlink_ext_ack *extack)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (!dev->dev_ops->vlan_add)
+		return -EOPNOTSUPP;
+
+	return dev->dev_ops->vlan_add(dev, port, vlan, extack);
+}
+
+static int ksz_port_vlan_del(struct dsa_switch *ds, int port,
+			     const struct switchdev_obj_port_vlan *vlan)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (!dev->dev_ops->vlan_del)
+		return -EOPNOTSUPP;
+
+	return dev->dev_ops->vlan_del(dev, port, vlan);
+}
+
+static int ksz_port_mirror_add(struct dsa_switch *ds, int port,
+			       struct dsa_mall_mirror_tc_entry *mirror,
+			       bool ingress, struct netlink_ext_ack *extack)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (!dev->dev_ops->mirror_add)
+		return -EOPNOTSUPP;
+
+	return dev->dev_ops->mirror_add(dev, port, mirror, ingress, extack);
+}
+
+static void ksz_port_mirror_del(struct dsa_switch *ds, int port,
+				struct dsa_mall_mirror_tc_entry *mirror)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (dev->dev_ops->mirror_del)
+		dev->dev_ops->mirror_del(dev, port, mirror);
+}
+
+static int ksz_change_mtu(struct dsa_switch *ds, int port, int mtu)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (!dev->dev_ops->change_mtu)
+		return -EOPNOTSUPP;
+
+	return dev->dev_ops->change_mtu(dev, port, mtu);
+}
+
+static int ksz_max_mtu(struct dsa_switch *ds, int port)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (!dev->dev_ops->max_mtu)
+		return -EOPNOTSUPP;
+
+	return dev->dev_ops->max_mtu(dev, port);
+}
+
+static void ksz_set_xmii(struct ksz_device *dev, int port,
+			 phy_interface_t interface)
+{
+	const u8 *bitval = dev->info->xmii_ctrl1;
+	struct ksz_port *p = &dev->ports[port];
+	const u16 *regs = dev->info->regs;
+	u8 data8;
+
+	ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
+
+	data8 &= ~(P_MII_SEL_M | P_RGMII_ID_IG_ENABLE |
+		   P_RGMII_ID_EG_ENABLE);
+
+	switch (interface) {
+	case PHY_INTERFACE_MODE_MII:
+		data8 |= bitval[P_MII_SEL];
+		break;
+	case PHY_INTERFACE_MODE_RMII:
+		data8 |= bitval[P_RMII_SEL];
+		break;
+	case PHY_INTERFACE_MODE_GMII:
+		data8 |= bitval[P_GMII_SEL];
+		break;
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		data8 |= bitval[P_RGMII_SEL];
+		/* On KSZ9893, disable RGMII in-band status support */
+		if (dev->chip_id == KSZ9893_CHIP_ID ||
+		    dev->chip_id == KSZ8563_CHIP_ID)
+			data8 &= ~P_MII_MAC_MODE;
+		break;
+	default:
+		dev_err(dev->dev, "Unsupported interface '%s' for port %d\n",
+			phy_modes(interface), port);
+		return;
+	}
+
+	if (p->rgmii_tx_val)
+		data8 |= P_RGMII_ID_EG_ENABLE;
+
+	if (p->rgmii_rx_val)
+		data8 |= P_RGMII_ID_IG_ENABLE;
+
+	/* Write the updated value */
+	ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8);
+}
+
+phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit)
+{
+	const u8 *bitval = dev->info->xmii_ctrl1;
+	const u16 *regs = dev->info->regs;
+	phy_interface_t interface;
+	u8 data8;
+	u8 val;
+
+	ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
+
+	val = FIELD_GET(P_MII_SEL_M, data8);
+
+	if (val == bitval[P_MII_SEL]) {
+		if (gbit)
+			interface = PHY_INTERFACE_MODE_GMII;
+		else
+			interface = PHY_INTERFACE_MODE_MII;
+	} else if (val == bitval[P_RMII_SEL]) {
+		interface = PHY_INTERFACE_MODE_RGMII;
+	} else {
+		interface = PHY_INTERFACE_MODE_RGMII;
+		if (data8 & P_RGMII_ID_EG_ENABLE)
+			interface = PHY_INTERFACE_MODE_RGMII_TXID;
+		if (data8 & P_RGMII_ID_IG_ENABLE) {
+			interface = PHY_INTERFACE_MODE_RGMII_RXID;
+			if (data8 & P_RGMII_ID_EG_ENABLE)
+				interface = PHY_INTERFACE_MODE_RGMII_ID;
+		}
+	}
+
+	return interface;
+}
+
+static void ksz_phylink_mac_config(struct dsa_switch *ds, int port,
+				   unsigned int mode,
+				   const struct phylink_link_state *state)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (ksz_is_ksz88x3(dev))
+		return;
+
+	/* Internal PHYs */
+	if (dev->info->internal_phy[port])
+		return;
+
+	if (phylink_autoneg_inband(mode)) {
+		dev_err(dev->dev, "In-band AN not supported!\n");
+		return;
+	}
+
+	ksz_set_xmii(dev, port, state->interface);
+
+	if (dev->dev_ops->phylink_mac_config)
+		dev->dev_ops->phylink_mac_config(dev, port, mode, state);
+
+	if (dev->dev_ops->setup_rgmii_delay)
+		dev->dev_ops->setup_rgmii_delay(dev, port);
+}
+
+bool ksz_get_gbit(struct ksz_device *dev, int port)
+{
+	const u8 *bitval = dev->info->xmii_ctrl1;
+	const u16 *regs = dev->info->regs;
+	bool gbit = false;
+	u8 data8;
+	bool val;
+
+	ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
+
+	val = FIELD_GET(P_GMII_1GBIT_M, data8);
+
+	if (val == bitval[P_GMII_1GBIT])
+		gbit = true;
+
+	return gbit;
+}
+
+static void ksz_set_gbit(struct ksz_device *dev, int port, bool gbit)
+{
+	const u8 *bitval = dev->info->xmii_ctrl1;
+	const u16 *regs = dev->info->regs;
+	u8 data8;
+
+	ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
+
+	data8 &= ~P_GMII_1GBIT_M;
+
+	if (gbit)
+		data8 |= FIELD_PREP(P_GMII_1GBIT_M, bitval[P_GMII_1GBIT]);
+	else
+		data8 |= FIELD_PREP(P_GMII_1GBIT_M, bitval[P_GMII_NOT_1GBIT]);
+
+	/* Write the updated value */
+	ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8);
+}
+
+static void ksz_set_100_10mbit(struct ksz_device *dev, int port, int speed)
+{
+	const u8 *bitval = dev->info->xmii_ctrl0;
+	const u16 *regs = dev->info->regs;
+	u8 data8;
+
+	ksz_pread8(dev, port, regs[P_XMII_CTRL_0], &data8);
+
+	data8 &= ~P_MII_100MBIT_M;
+
+	if (speed == SPEED_100)
+		data8 |= FIELD_PREP(P_MII_100MBIT_M, bitval[P_MII_100MBIT]);
+	else
+		data8 |= FIELD_PREP(P_MII_100MBIT_M, bitval[P_MII_10MBIT]);
+
+	/* Write the updated value */
+	ksz_pwrite8(dev, port, regs[P_XMII_CTRL_0], data8);
+}
+
+static void ksz_port_set_xmii_speed(struct ksz_device *dev, int port, int speed)
+{
+	if (speed == SPEED_1000)
+		ksz_set_gbit(dev, port, true);
+	else
+		ksz_set_gbit(dev, port, false);
+
+	if (speed == SPEED_100 || speed == SPEED_10)
+		ksz_set_100_10mbit(dev, port, speed);
+}
+
+static void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
+				bool tx_pause, bool rx_pause)
+{
+	const u8 *bitval = dev->info->xmii_ctrl0;
+	const u32 *masks = dev->info->masks;
+	const u16 *regs = dev->info->regs;
+	u8 mask;
+	u8 val;
+
+	mask = P_MII_DUPLEX_M | masks[P_MII_TX_FLOW_CTRL] |
+	       masks[P_MII_RX_FLOW_CTRL];
+
+	if (duplex == DUPLEX_FULL)
+		val = FIELD_PREP(P_MII_DUPLEX_M, bitval[P_MII_FULL_DUPLEX]);
+	else
+		val = FIELD_PREP(P_MII_DUPLEX_M, bitval[P_MII_HALF_DUPLEX]);
+
+	if (tx_pause)
+		val |= masks[P_MII_TX_FLOW_CTRL];
+
+	if (rx_pause)
+		val |= masks[P_MII_RX_FLOW_CTRL];
+
+	ksz_prmw8(dev, port, regs[P_XMII_CTRL_0], mask, val);
+}
+
+static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
+					unsigned int mode,
+					phy_interface_t interface,
+					struct phy_device *phydev, int speed,
+					int duplex, bool tx_pause,
+					bool rx_pause)
+{
+	struct ksz_port *p;
+
+	p = &dev->ports[port];
+
+	/* Internal PHYs */
+	if (dev->info->internal_phy[port])
+		return;
+
+	p->phydev.speed = speed;
+
+	ksz_port_set_xmii_speed(dev, port, speed);
+
+	ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause);
+}
+
+static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
+				    unsigned int mode,
+				    phy_interface_t interface,
+				    struct phy_device *phydev, int speed,
+				    int duplex, bool tx_pause, bool rx_pause)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (dev->dev_ops->phylink_mac_link_up)
+		dev->dev_ops->phylink_mac_link_up(dev, port, mode, interface,
+						  phydev, speed, duplex,
+						  tx_pause, rx_pause);
+}
+
+static int ksz_switch_detect(struct ksz_device *dev)
+{
+	u8 id1, id2, id4;
+	u16 id16;
+	u32 id32;
+	int ret;
+
+	/* read chip id */
+	ret = ksz_read16(dev, REG_CHIP_ID0, &id16);
+	if (ret)
+		return ret;
+
+	id1 = FIELD_GET(SW_FAMILY_ID_M, id16);
+	id2 = FIELD_GET(SW_CHIP_ID_M, id16);
+
+	switch (id1) {
+	case KSZ87_FAMILY_ID:
+		if (id2 == KSZ87_CHIP_ID_95) {
+			u8 val;
+
+			dev->chip_id = KSZ8795_CHIP_ID;
+
+			ksz_read8(dev, KSZ8_PORT_STATUS_0, &val);
+			if (val & KSZ8_PORT_FIBER_MODE)
+				dev->chip_id = KSZ8765_CHIP_ID;
+		} else if (id2 == KSZ87_CHIP_ID_94) {
+			dev->chip_id = KSZ8794_CHIP_ID;
+		} else {
+			return -ENODEV;
+		}
+		break;
+	case KSZ88_FAMILY_ID:
+		if (id2 == KSZ88_CHIP_ID_63)
+			dev->chip_id = KSZ8830_CHIP_ID;
+		else
+			return -ENODEV;
+		break;
+	default:
+		ret = ksz_read32(dev, REG_CHIP_ID0, &id32);
+		if (ret)
+			return ret;
+
+		dev->chip_rev = FIELD_GET(SW_REV_ID_M, id32);
+		id32 &= ~0xFF;
+
+		switch (id32) {
+		case KSZ9477_CHIP_ID:
+		case KSZ9896_CHIP_ID:
+		case KSZ9897_CHIP_ID:
+		case KSZ9567_CHIP_ID:
+		case LAN9370_CHIP_ID:
+		case LAN9371_CHIP_ID:
+		case LAN9372_CHIP_ID:
+		case LAN9373_CHIP_ID:
+		case LAN9374_CHIP_ID:
+			dev->chip_id = id32;
+			break;
+		case KSZ9893_CHIP_ID:
+			ret = ksz_read8(dev, REG_CHIP_ID4,
+					&id4);
+			if (ret)
+				return ret;
+
+			if (id4 == SKU_ID_KSZ8563)
+				dev->chip_id = KSZ8563_CHIP_ID;
+			else
+				dev->chip_id = KSZ9893_CHIP_ID;
+
+			break;
+		default:
+			dev_err(dev->dev,
+				"unsupported switch detected %x)\n", id32);
+			return -ENODEV;
+		}
+	}
+	return 0;
+}
+
+static const struct dsa_switch_ops ksz_switch_ops = {
+	.get_tag_protocol	= ksz_get_tag_protocol,
+	.get_phy_flags		= ksz_get_phy_flags,
+	.setup			= ksz_setup,
+	.teardown		= ksz_teardown,
+	.phy_read		= ksz_phy_read16,
+	.phy_write		= ksz_phy_write16,
+	.phylink_get_caps	= ksz_phylink_get_caps,
+	.phylink_mac_config	= ksz_phylink_mac_config,
+	.phylink_mac_link_up	= ksz_phylink_mac_link_up,
+	.phylink_mac_link_down	= ksz_mac_link_down,
+	.port_enable		= ksz_enable_port,
+	.set_ageing_time	= ksz_set_ageing_time,
+	.get_strings		= ksz_get_strings,
+	.get_ethtool_stats	= ksz_get_ethtool_stats,
+	.get_sset_count		= ksz_sset_count,
+	.port_bridge_join	= ksz_port_bridge_join,
+	.port_bridge_leave	= ksz_port_bridge_leave,
+	.port_stp_state_set	= ksz_port_stp_state_set,
+	.port_pre_bridge_flags	= ksz_port_pre_bridge_flags,
+	.port_bridge_flags	= ksz_port_bridge_flags,
+	.port_fast_age		= ksz_port_fast_age,
+	.port_vlan_filtering	= ksz_port_vlan_filtering,
+	.port_vlan_add		= ksz_port_vlan_add,
+	.port_vlan_del		= ksz_port_vlan_del,
+	.port_fdb_dump		= ksz_port_fdb_dump,
+	.port_fdb_add		= ksz_port_fdb_add,
+	.port_fdb_del		= ksz_port_fdb_del,
+	.port_mdb_add           = ksz_port_mdb_add,
+	.port_mdb_del           = ksz_port_mdb_del,
+	.port_mirror_add	= ksz_port_mirror_add,
+	.port_mirror_del	= ksz_port_mirror_del,
+	.get_stats64		= ksz_get_stats64,
+	.get_pause_stats	= ksz_get_pause_stats,
+	.port_change_mtu	= ksz_change_mtu,
+	.port_max_mtu		= ksz_max_mtu,
+};
+
+struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
+{
+	struct dsa_switch *ds;
+	struct ksz_device *swdev;
+
+	ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
+	if (!ds)
+		return NULL;
+
+	ds->dev = base;
+	ds->num_ports = DSA_MAX_PORTS;
+	ds->ops = &ksz_switch_ops;
+
+	swdev = devm_kzalloc(base, sizeof(*swdev), GFP_KERNEL);
+	if (!swdev)
+		return NULL;
+
+	ds->priv = swdev;
+	swdev->dev = base;
+
+	swdev->ds = ds;
+	swdev->priv = priv;
+
+	return swdev;
+}
+EXPORT_SYMBOL(ksz_switch_alloc);
+
+static void ksz_parse_rgmii_delay(struct ksz_device *dev, int port_num,
+				  struct device_node *port_dn)
+{
+	phy_interface_t phy_mode = dev->ports[port_num].interface;
+	int rx_delay = -1, tx_delay = -1;
+
+	if (!phy_interface_mode_is_rgmii(phy_mode))
+		return;
+
+	of_property_read_u32(port_dn, "rx-internal-delay-ps", &rx_delay);
+	of_property_read_u32(port_dn, "tx-internal-delay-ps", &tx_delay);
+
+	if (rx_delay == -1 && tx_delay == -1) {
+		dev_warn(dev->dev,
+			 "Port %d interpreting RGMII delay settings based on \"phy-mode\" property, "
+			 "please update device tree to specify \"rx-internal-delay-ps\" and "
+			 "\"tx-internal-delay-ps\"",
+			 port_num);
+
+		if (phy_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
+		    phy_mode == PHY_INTERFACE_MODE_RGMII_ID)
+			rx_delay = 2000;
+
+		if (phy_mode == PHY_INTERFACE_MODE_RGMII_TXID ||
+		    phy_mode == PHY_INTERFACE_MODE_RGMII_ID)
+			tx_delay = 2000;
+	}
+
+	if (rx_delay < 0)
+		rx_delay = 0;
+	if (tx_delay < 0)
+		tx_delay = 0;
+
+	dev->ports[port_num].rgmii_rx_val = rx_delay;
+	dev->ports[port_num].rgmii_tx_val = tx_delay;
+}
+
+int ksz_switch_register(struct ksz_device *dev)
+{
+	const struct ksz_chip_data *info;
+	struct device_node *port, *ports;
+	phy_interface_t interface;
+	unsigned int port_num;
+	int ret;
+	int i;
+
+	if (dev->pdata)
+		dev->chip_id = dev->pdata->chip_id;
+
+	dev->reset_gpio = devm_gpiod_get_optional(dev->dev, "reset",
+						  GPIOD_OUT_LOW);
+	if (IS_ERR(dev->reset_gpio))
+		return PTR_ERR(dev->reset_gpio);
+
+	if (dev->reset_gpio) {
+		gpiod_set_value_cansleep(dev->reset_gpio, 1);
+		usleep_range(10000, 12000);
+		gpiod_set_value_cansleep(dev->reset_gpio, 0);
+		msleep(100);
+	}
+
+	mutex_init(&dev->dev_mutex);
+	mutex_init(&dev->regmap_mutex);
+	mutex_init(&dev->alu_mutex);
+	mutex_init(&dev->vlan_mutex);
+
+	ret = ksz_switch_detect(dev);
+	if (ret)
+		return ret;
+
+	info = ksz_lookup_info(dev->chip_id);
+	if (!info)
+		return -ENODEV;
+
+	/* Update the compatible info with the probed one */
+	dev->info = info;
+
+	dev_info(dev->dev, "found switch: %s, rev %i\n",
+		 dev->info->dev_name, dev->chip_rev);
+
+	ret = ksz_check_device_id(dev);
+	if (ret)
+		return ret;
+
+	dev->dev_ops = dev->info->ops;
+
+	ret = dev->dev_ops->init(dev);
+	if (ret)
+		return ret;
+
+	dev->ports = devm_kzalloc(dev->dev,
+				  dev->info->port_cnt * sizeof(struct ksz_port),
+				  GFP_KERNEL);
+	if (!dev->ports)
+		return -ENOMEM;
+
+	for (i = 0; i < dev->info->port_cnt; i++) {
+		spin_lock_init(&dev->ports[i].mib.stats64_lock);
+		mutex_init(&dev->ports[i].mib.cnt_mutex);
+		dev->ports[i].mib.counters =
+			devm_kzalloc(dev->dev,
+				     sizeof(u64) * (dev->info->mib_cnt + 1),
+				     GFP_KERNEL);
+		if (!dev->ports[i].mib.counters)
+			return -ENOMEM;
+
+		dev->ports[i].ksz_dev = dev;
+		dev->ports[i].num = i;
+	}
+
+	/* set the real number of ports */
+	dev->ds->num_ports = dev->info->port_cnt;
+
+	/* Host port interface will be self detected, or specifically set in
+	 * device tree.
+	 */
+	for (port_num = 0; port_num < dev->info->port_cnt; ++port_num)
+		dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA;
+	if (dev->dev->of_node) {
+		ret = of_get_phy_mode(dev->dev->of_node, &interface);
+		if (ret == 0)
+			dev->compat_interface = interface;
+		ports = of_get_child_by_name(dev->dev->of_node, "ethernet-ports");
+		if (!ports)
+			ports = of_get_child_by_name(dev->dev->of_node, "ports");
+		if (ports) {
+			for_each_available_child_of_node(ports, port) {
+				if (of_property_read_u32(port, "reg",
+							 &port_num))
+					continue;
+				if (!(dev->port_mask & BIT(port_num))) {
+					of_node_put(port);
+					of_node_put(ports);
+					return -EINVAL;
+				}
+				of_get_phy_mode(port,
+						&dev->ports[port_num].interface);
+
+				ksz_parse_rgmii_delay(dev, port_num, port);
+			}
+			of_node_put(ports);
+		}
+		dev->synclko_125 = of_property_read_bool(dev->dev->of_node,
+							 "microchip,synclko-125");
+		dev->synclko_disable = of_property_read_bool(dev->dev->of_node,
+							     "microchip,synclko-disable");
+		if (dev->synclko_125 && dev->synclko_disable) {
+			dev_err(dev->dev, "inconsistent synclko settings\n");
+			return -EINVAL;
+		}
+	}
+
+	ret = dsa_register_switch(dev->ds);
+	if (ret) {
+		dev->dev_ops->exit(dev);
+		return ret;
+	}
+
+	/* Read MIB counters every 30 seconds to avoid overflow. */
+	dev->mib_read_interval = msecs_to_jiffies(5000);
+
+	/* Start the MIB timer. */
+	schedule_delayed_work(&dev->mib_read, 0);
+
+	return ret;
+}
+EXPORT_SYMBOL(ksz_switch_register);
+
+void ksz_switch_remove(struct ksz_device *dev)
+{
+	/* timer started */
+	if (dev->mib_read_interval) {
+		dev->mib_read_interval = 0;
+		cancel_delayed_work_sync(&dev->mib_read);
+	}
+
+	dev->dev_ops->exit(dev);
+	dsa_unregister_switch(dev->ds);
+
+	if (dev->reset_gpio)
+		gpiod_set_value_cansleep(dev->reset_gpio, 1);
+
+}
+EXPORT_SYMBOL(ksz_switch_remove);
+
+MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
new file mode 100644
index 000000000..d1b2db8e6
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -0,0 +1,632 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Microchip switch driver common header
+ *
+ * Copyright (C) 2017-2019 Microchip Technology Inc.
+ */
+
+#ifndef __KSZ_COMMON_H
+#define __KSZ_COMMON_H
+
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <net/dsa.h>
+#include <linux/irq.h>
+
+#define KSZ_MAX_NUM_PORTS 8
+
+struct ksz_device;
+
+struct vlan_table {
+	u32 table[3];
+};
+
+struct ksz_port_mib {
+	struct mutex cnt_mutex;		/* structure access */
+	u8 cnt_ptr;
+	u64 *counters;
+	struct rtnl_link_stats64 stats64;
+	struct ethtool_pause_stats pause_stats;
+	struct spinlock stats64_lock;
+};
+
+struct ksz_mib_names {
+	int index;
+	char string[ETH_GSTRING_LEN];
+};
+
+struct ksz_chip_data {
+	u32 chip_id;
+	const char *dev_name;
+	int num_vlans;
+	int num_alus;
+	int num_statics;
+	int cpu_ports;
+	int port_cnt;
+	u8 port_nirqs;
+	const struct ksz_dev_ops *ops;
+	bool phy_errata_9477;
+	bool ksz87xx_eee_link_erratum;
+	const struct ksz_mib_names *mib_names;
+	int mib_cnt;
+	u8 reg_mib_cnt;
+	const u16 *regs;
+	const u32 *masks;
+	const u8 *shifts;
+	const u8 *xmii_ctrl0;
+	const u8 *xmii_ctrl1;
+	int stp_ctrl_reg;
+	int broadcast_ctrl_reg;
+	int multicast_ctrl_reg;
+	int start_ctrl_reg;
+	bool supports_mii[KSZ_MAX_NUM_PORTS];
+	bool supports_rmii[KSZ_MAX_NUM_PORTS];
+	bool supports_rgmii[KSZ_MAX_NUM_PORTS];
+	bool internal_phy[KSZ_MAX_NUM_PORTS];
+	bool gbit_capable[KSZ_MAX_NUM_PORTS];
+	const struct regmap_access_table *wr_table;
+	const struct regmap_access_table *rd_table;
+};
+
+struct ksz_irq {
+	u16 masked;
+	u16 reg_mask;
+	u16 reg_status;
+	struct irq_domain *domain;
+	int nirqs;
+	int irq_num;
+	char name[16];
+	struct ksz_device *dev;
+};
+
+struct ksz_port {
+	bool remove_tag;		/* Remove Tag flag set, for ksz8795 only */
+	bool learning;
+	int stp_state;
+	struct phy_device phydev;
+
+	u32 on:1;			/* port is not disabled by hardware */
+	u32 fiber:1;			/* port is fiber */
+	u32 force:1;
+	u32 read:1;			/* read MIB counters in background */
+	u32 freeze:1;			/* MIB counter freeze is enabled */
+
+	struct ksz_port_mib mib;
+	phy_interface_t interface;
+	u16 max_frame;
+	u32 rgmii_tx_val;
+	u32 rgmii_rx_val;
+	struct ksz_device *ksz_dev;
+	struct ksz_irq pirq;
+	u8 num;
+};
+
+struct ksz_device {
+	struct dsa_switch *ds;
+	struct ksz_platform_data *pdata;
+	const struct ksz_chip_data *info;
+
+	struct mutex dev_mutex;		/* device access */
+	struct mutex regmap_mutex;	/* regmap access */
+	struct mutex alu_mutex;		/* ALU access */
+	struct mutex vlan_mutex;	/* vlan access */
+	const struct ksz_dev_ops *dev_ops;
+
+	struct device *dev;
+	struct regmap *regmap[3];
+
+	void *priv;
+	int irq;
+
+	struct gpio_desc *reset_gpio;	/* Optional reset GPIO */
+
+	/* chip specific data */
+	u32 chip_id;
+	u8 chip_rev;
+	int cpu_port;			/* port connected to CPU */
+	int phy_port_cnt;
+	phy_interface_t compat_interface;
+	bool synclko_125;
+	bool synclko_disable;
+
+	struct vlan_table *vlan_cache;
+
+	struct ksz_port *ports;
+	struct delayed_work mib_read;
+	unsigned long mib_read_interval;
+	u16 mirror_rx;
+	u16 mirror_tx;
+	u16 port_mask;
+	struct mutex lock_irq;		/* IRQ Access */
+	struct ksz_irq girq;
+};
+
+/* List of supported models */
+enum ksz_model {
+	KSZ8563,
+	KSZ8795,
+	KSZ8794,
+	KSZ8765,
+	KSZ8830,
+	KSZ9477,
+	KSZ9896,
+	KSZ9897,
+	KSZ9893,
+	KSZ9567,
+	LAN9370,
+	LAN9371,
+	LAN9372,
+	LAN9373,
+	LAN9374,
+};
+
+enum ksz_chip_id {
+	KSZ8563_CHIP_ID = 0x8563,
+	KSZ8795_CHIP_ID = 0x8795,
+	KSZ8794_CHIP_ID = 0x8794,
+	KSZ8765_CHIP_ID = 0x8765,
+	KSZ8830_CHIP_ID = 0x8830,
+	KSZ9477_CHIP_ID = 0x00947700,
+	KSZ9896_CHIP_ID = 0x00989600,
+	KSZ9897_CHIP_ID = 0x00989700,
+	KSZ9893_CHIP_ID = 0x00989300,
+	KSZ9567_CHIP_ID = 0x00956700,
+	LAN9370_CHIP_ID = 0x00937000,
+	LAN9371_CHIP_ID = 0x00937100,
+	LAN9372_CHIP_ID = 0x00937200,
+	LAN9373_CHIP_ID = 0x00937300,
+	LAN9374_CHIP_ID = 0x00937400,
+};
+
+enum ksz_regs {
+	REG_IND_CTRL_0,
+	REG_IND_DATA_8,
+	REG_IND_DATA_CHECK,
+	REG_IND_DATA_HI,
+	REG_IND_DATA_LO,
+	REG_IND_MIB_CHECK,
+	REG_IND_BYTE,
+	P_FORCE_CTRL,
+	P_LINK_STATUS,
+	P_LOCAL_CTRL,
+	P_NEG_RESTART_CTRL,
+	P_REMOTE_STATUS,
+	P_SPEED_STATUS,
+	S_TAIL_TAG_CTRL,
+	P_STP_CTRL,
+	S_START_CTRL,
+	S_BROADCAST_CTRL,
+	S_MULTICAST_CTRL,
+	P_XMII_CTRL_0,
+	P_XMII_CTRL_1,
+};
+
+enum ksz_masks {
+	PORT_802_1P_REMAPPING,
+	SW_TAIL_TAG_ENABLE,
+	MIB_COUNTER_OVERFLOW,
+	MIB_COUNTER_VALID,
+	VLAN_TABLE_FID,
+	VLAN_TABLE_MEMBERSHIP,
+	VLAN_TABLE_VALID,
+	STATIC_MAC_TABLE_VALID,
+	STATIC_MAC_TABLE_USE_FID,
+	STATIC_MAC_TABLE_FID,
+	STATIC_MAC_TABLE_OVERRIDE,
+	STATIC_MAC_TABLE_FWD_PORTS,
+	DYNAMIC_MAC_TABLE_ENTRIES_H,
+	DYNAMIC_MAC_TABLE_MAC_EMPTY,
+	DYNAMIC_MAC_TABLE_NOT_READY,
+	DYNAMIC_MAC_TABLE_ENTRIES,
+	DYNAMIC_MAC_TABLE_FID,
+	DYNAMIC_MAC_TABLE_SRC_PORT,
+	DYNAMIC_MAC_TABLE_TIMESTAMP,
+	ALU_STAT_WRITE,
+	ALU_STAT_READ,
+	P_MII_TX_FLOW_CTRL,
+	P_MII_RX_FLOW_CTRL,
+};
+
+enum ksz_shifts {
+	VLAN_TABLE_MEMBERSHIP_S,
+	VLAN_TABLE,
+	STATIC_MAC_FWD_PORTS,
+	STATIC_MAC_FID,
+	DYNAMIC_MAC_ENTRIES_H,
+	DYNAMIC_MAC_ENTRIES,
+	DYNAMIC_MAC_FID,
+	DYNAMIC_MAC_TIMESTAMP,
+	DYNAMIC_MAC_SRC_PORT,
+	ALU_STAT_INDEX,
+};
+
+enum ksz_xmii_ctrl0 {
+	P_MII_100MBIT,
+	P_MII_10MBIT,
+	P_MII_FULL_DUPLEX,
+	P_MII_HALF_DUPLEX,
+};
+
+enum ksz_xmii_ctrl1 {
+	P_RGMII_SEL,
+	P_RMII_SEL,
+	P_GMII_SEL,
+	P_MII_SEL,
+	P_GMII_1GBIT,
+	P_GMII_NOT_1GBIT,
+};
+
+struct alu_struct {
+	/* entry 1 */
+	u8	is_static:1;
+	u8	is_src_filter:1;
+	u8	is_dst_filter:1;
+	u8	prio_age:3;
+	u32	_reserv_0_1:23;
+	u8	mstp:3;
+	/* entry 2 */
+	u8	is_override:1;
+	u8	is_use_fid:1;
+	u32	_reserv_1_1:23;
+	u8	port_forward:7;
+	/* entry 3 & 4*/
+	u32	_reserv_2_1:9;
+	u8	fid:7;
+	u8	mac[ETH_ALEN];
+};
+
+struct ksz_dev_ops {
+	int (*setup)(struct dsa_switch *ds);
+	void (*teardown)(struct dsa_switch *ds);
+	u32 (*get_port_addr)(int port, int offset);
+	void (*cfg_port_member)(struct ksz_device *dev, int port, u8 member);
+	void (*flush_dyn_mac_table)(struct ksz_device *dev, int port);
+	void (*port_cleanup)(struct ksz_device *dev, int port);
+	void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port);
+	int (*set_ageing_time)(struct ksz_device *dev, unsigned int msecs);
+	int (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
+	int (*w_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 val);
+	void (*r_mib_cnt)(struct ksz_device *dev, int port, u16 addr,
+			  u64 *cnt);
+	void (*r_mib_pkt)(struct ksz_device *dev, int port, u16 addr,
+			  u64 *dropped, u64 *cnt);
+	void (*r_mib_stat64)(struct ksz_device *dev, int port);
+	int  (*vlan_filtering)(struct ksz_device *dev, int port,
+			       bool flag, struct netlink_ext_ack *extack);
+	int  (*vlan_add)(struct ksz_device *dev, int port,
+			 const struct switchdev_obj_port_vlan *vlan,
+			 struct netlink_ext_ack *extack);
+	int  (*vlan_del)(struct ksz_device *dev, int port,
+			 const struct switchdev_obj_port_vlan *vlan);
+	int (*mirror_add)(struct ksz_device *dev, int port,
+			  struct dsa_mall_mirror_tc_entry *mirror,
+			  bool ingress, struct netlink_ext_ack *extack);
+	void (*mirror_del)(struct ksz_device *dev, int port,
+			   struct dsa_mall_mirror_tc_entry *mirror);
+	int (*fdb_add)(struct ksz_device *dev, int port,
+		       const unsigned char *addr, u16 vid, struct dsa_db db);
+	int (*fdb_del)(struct ksz_device *dev, int port,
+		       const unsigned char *addr, u16 vid, struct dsa_db db);
+	int (*fdb_dump)(struct ksz_device *dev, int port,
+			dsa_fdb_dump_cb_t *cb, void *data);
+	int (*mdb_add)(struct ksz_device *dev, int port,
+		       const struct switchdev_obj_port_mdb *mdb,
+		       struct dsa_db db);
+	int (*mdb_del)(struct ksz_device *dev, int port,
+		       const struct switchdev_obj_port_mdb *mdb,
+		       struct dsa_db db);
+	void (*get_caps)(struct ksz_device *dev, int port,
+			 struct phylink_config *config);
+	int (*change_mtu)(struct ksz_device *dev, int port, int mtu);
+	int (*max_mtu)(struct ksz_device *dev, int port);
+	void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
+	void (*port_init_cnt)(struct ksz_device *dev, int port);
+	void (*phylink_mac_config)(struct ksz_device *dev, int port,
+				   unsigned int mode,
+				   const struct phylink_link_state *state);
+	void (*phylink_mac_link_up)(struct ksz_device *dev, int port,
+				    unsigned int mode,
+				    phy_interface_t interface,
+				    struct phy_device *phydev, int speed,
+				    int duplex, bool tx_pause, bool rx_pause);
+	void (*setup_rgmii_delay)(struct ksz_device *dev, int port);
+	void (*config_cpu_port)(struct dsa_switch *ds);
+	int (*enable_stp_addr)(struct ksz_device *dev);
+	int (*reset)(struct ksz_device *dev);
+	int (*init)(struct ksz_device *dev);
+	void (*exit)(struct ksz_device *dev);
+};
+
+struct ksz_device *ksz_switch_alloc(struct device *base, void *priv);
+int ksz_switch_register(struct ksz_device *dev);
+void ksz_switch_remove(struct ksz_device *dev);
+
+void ksz_init_mib_timer(struct ksz_device *dev);
+void ksz_r_mib_stats64(struct ksz_device *dev, int port);
+void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state);
+bool ksz_get_gbit(struct ksz_device *dev, int port);
+phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit);
+extern const struct ksz_chip_data ksz_switch_chips[];
+
+/* Common register access functions */
+
+static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val)
+{
+	unsigned int value;
+	int ret = regmap_read(dev->regmap[0], reg, &value);
+
+	if (ret)
+		dev_err(dev->dev, "can't read 8bit reg: 0x%x %pe\n", reg,
+			ERR_PTR(ret));
+
+	*val = value;
+	return ret;
+}
+
+static inline int ksz_read16(struct ksz_device *dev, u32 reg, u16 *val)
+{
+	unsigned int value;
+	int ret = regmap_read(dev->regmap[1], reg, &value);
+
+	if (ret)
+		dev_err(dev->dev, "can't read 16bit reg: 0x%x %pe\n", reg,
+			ERR_PTR(ret));
+
+	*val = value;
+	return ret;
+}
+
+static inline int ksz_read32(struct ksz_device *dev, u32 reg, u32 *val)
+{
+	unsigned int value;
+	int ret = regmap_read(dev->regmap[2], reg, &value);
+
+	if (ret)
+		dev_err(dev->dev, "can't read 32bit reg: 0x%x %pe\n", reg,
+			ERR_PTR(ret));
+
+	*val = value;
+	return ret;
+}
+
+static inline int ksz_read64(struct ksz_device *dev, u32 reg, u64 *val)
+{
+	u32 value[2];
+	int ret;
+
+	ret = regmap_bulk_read(dev->regmap[2], reg, value, 2);
+	if (ret)
+		dev_err(dev->dev, "can't read 64bit reg: 0x%x %pe\n", reg,
+			ERR_PTR(ret));
+	else
+		*val = (u64)value[0] << 32 | value[1];
+
+	return ret;
+}
+
+static inline int ksz_write8(struct ksz_device *dev, u32 reg, u8 value)
+{
+	int ret;
+
+	ret = regmap_write(dev->regmap[0], reg, value);
+	if (ret)
+		dev_err(dev->dev, "can't write 8bit reg: 0x%x %pe\n", reg,
+			ERR_PTR(ret));
+
+	return ret;
+}
+
+static inline int ksz_write16(struct ksz_device *dev, u32 reg, u16 value)
+{
+	int ret;
+
+	ret = regmap_write(dev->regmap[1], reg, value);
+	if (ret)
+		dev_err(dev->dev, "can't write 16bit reg: 0x%x %pe\n", reg,
+			ERR_PTR(ret));
+
+	return ret;
+}
+
+static inline int ksz_write32(struct ksz_device *dev, u32 reg, u32 value)
+{
+	int ret;
+
+	ret = regmap_write(dev->regmap[2], reg, value);
+	if (ret)
+		dev_err(dev->dev, "can't write 32bit reg: 0x%x %pe\n", reg,
+			ERR_PTR(ret));
+
+	return ret;
+}
+
+static inline int ksz_write64(struct ksz_device *dev, u32 reg, u64 value)
+{
+	u32 val[2];
+
+	/* Ick! ToDo: Add 64bit R/W to regmap on 32bit systems */
+	value = swab64(value);
+	val[0] = swab32(value & 0xffffffffULL);
+	val[1] = swab32(value >> 32ULL);
+
+	return regmap_bulk_write(dev->regmap[2], reg, val, 2);
+}
+
+static inline int ksz_pread8(struct ksz_device *dev, int port, int offset,
+			     u8 *data)
+{
+	return ksz_read8(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline int ksz_pread16(struct ksz_device *dev, int port, int offset,
+			      u16 *data)
+{
+	return ksz_read16(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline int ksz_pread32(struct ksz_device *dev, int port, int offset,
+			      u32 *data)
+{
+	return ksz_read32(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline int ksz_pwrite8(struct ksz_device *dev, int port, int offset,
+			      u8 data)
+{
+	return ksz_write8(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline int ksz_pwrite16(struct ksz_device *dev, int port, int offset,
+			       u16 data)
+{
+	return ksz_write16(dev, dev->dev_ops->get_port_addr(port, offset),
+			   data);
+}
+
+static inline int ksz_pwrite32(struct ksz_device *dev, int port, int offset,
+			       u32 data)
+{
+	return ksz_write32(dev, dev->dev_ops->get_port_addr(port, offset),
+			   data);
+}
+
+static inline void ksz_prmw8(struct ksz_device *dev, int port, int offset,
+			     u8 mask, u8 val)
+{
+	regmap_update_bits(dev->regmap[0],
+			   dev->dev_ops->get_port_addr(port, offset),
+			   mask, val);
+}
+
+static inline void ksz_regmap_lock(void *__mtx)
+{
+	struct mutex *mtx = __mtx;
+	mutex_lock(mtx);
+}
+
+static inline void ksz_regmap_unlock(void *__mtx)
+{
+	struct mutex *mtx = __mtx;
+	mutex_unlock(mtx);
+}
+
+static inline bool ksz_is_ksz87xx(struct ksz_device *dev)
+{
+	return dev->chip_id == KSZ8795_CHIP_ID ||
+	       dev->chip_id == KSZ8794_CHIP_ID ||
+	       dev->chip_id == KSZ8765_CHIP_ID;
+}
+
+static inline bool ksz_is_ksz88x3(struct ksz_device *dev)
+{
+	return dev->chip_id == KSZ8830_CHIP_ID;
+}
+
+static inline int is_lan937x(struct ksz_device *dev)
+{
+	return dev->chip_id == LAN9370_CHIP_ID ||
+		dev->chip_id == LAN9371_CHIP_ID ||
+		dev->chip_id == LAN9372_CHIP_ID ||
+		dev->chip_id == LAN9373_CHIP_ID ||
+		dev->chip_id == LAN9374_CHIP_ID;
+}
+
+/* STP State Defines */
+#define PORT_TX_ENABLE			BIT(2)
+#define PORT_RX_ENABLE			BIT(1)
+#define PORT_LEARN_DISABLE		BIT(0)
+
+/* Switch ID Defines */
+#define REG_CHIP_ID0			0x00
+
+#define SW_FAMILY_ID_M			GENMASK(15, 8)
+#define KSZ87_FAMILY_ID			0x87
+#define KSZ88_FAMILY_ID			0x88
+
+#define KSZ8_PORT_STATUS_0		0x08
+#define KSZ8_PORT_FIBER_MODE		BIT(7)
+
+#define SW_CHIP_ID_M			GENMASK(7, 4)
+#define KSZ87_CHIP_ID_94		0x6
+#define KSZ87_CHIP_ID_95		0x9
+#define KSZ88_CHIP_ID_63		0x3
+
+#define SW_REV_ID_M			GENMASK(7, 4)
+
+/* KSZ9893, KSZ9563, KSZ8563 specific register  */
+#define REG_CHIP_ID4			0x0f
+#define SKU_ID_KSZ8563			0x3c
+
+/* Driver set switch broadcast storm protection at 10% rate. */
+#define BROADCAST_STORM_PROT_RATE	10
+
+/* 148,800 frames * 67 ms / 100 */
+#define BROADCAST_STORM_VALUE		9969
+
+#define BROADCAST_STORM_RATE_HI		0x07
+#define BROADCAST_STORM_RATE_LO		0xFF
+#define BROADCAST_STORM_RATE		0x07FF
+
+#define MULTICAST_STORM_DISABLE		BIT(6)
+
+#define SW_START			0x01
+
+/* xMII configuration */
+#define P_MII_DUPLEX_M			BIT(6)
+#define P_MII_100MBIT_M			BIT(4)
+
+#define P_GMII_1GBIT_M			BIT(6)
+#define P_RGMII_ID_IG_ENABLE		BIT(4)
+#define P_RGMII_ID_EG_ENABLE		BIT(3)
+#define P_MII_MAC_MODE			BIT(2)
+#define P_MII_SEL_M			0x3
+
+/* Interrupt */
+#define REG_SW_PORT_INT_STATUS__1	0x001B
+#define REG_SW_PORT_INT_MASK__1		0x001F
+
+#define REG_PORT_INT_STATUS		0x001B
+#define REG_PORT_INT_MASK		0x001F
+
+#define PORT_SRC_PHY_INT		1
+
+/* Regmap tables generation */
+#define KSZ_SPI_OP_RD		3
+#define KSZ_SPI_OP_WR		2
+
+#define swabnot_used(x)		0
+
+#define KSZ_SPI_OP_FLAG_MASK(opcode, swp, regbits, regpad)		\
+	swab##swp((opcode) << ((regbits) + (regpad)))
+
+#define KSZ_REGMAP_ENTRY(width, swp, regbits, regpad, regalign)		\
+	{								\
+		.name = #width,						\
+		.val_bits = (width),					\
+		.reg_stride = 1,					\
+		.reg_bits = (regbits) + (regalign),			\
+		.pad_bits = (regpad),					\
+		.max_register = BIT(regbits) - 1,			\
+		.cache_type = REGCACHE_NONE,				\
+		.read_flag_mask =					\
+			KSZ_SPI_OP_FLAG_MASK(KSZ_SPI_OP_RD, swp,	\
+					     regbits, regpad),		\
+		.write_flag_mask =					\
+			KSZ_SPI_OP_FLAG_MASK(KSZ_SPI_OP_WR, swp,	\
+					     regbits, regpad),		\
+		.lock = ksz_regmap_lock,				\
+		.unlock = ksz_regmap_unlock,				\
+		.reg_format_endian = REGMAP_ENDIAN_BIG,			\
+		.val_format_endian = REGMAP_ENDIAN_BIG			\
+	}
+
+#define KSZ_REGMAP_TABLE(ksz, swp, regbits, regpad, regalign)		\
+	static const struct regmap_config ksz##_regmap_config[] = {	\
+		KSZ_REGMAP_ENTRY(8, swp, (regbits), (regpad), (regalign)), \
+		KSZ_REGMAP_ENTRY(16, swp, (regbits), (regpad), (regalign)), \
+		KSZ_REGMAP_ENTRY(32, swp, (regbits), (regpad), (regalign)), \
+	}
+
+#endif
diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c
new file mode 100644
index 000000000..1b6ab891b
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_spi.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Microchip ksz series register access through SPI
+ *
+ * Copyright (C) 2017 Microchip Technology Inc.
+ *	Tristram Ha <Tristram.Ha@microchip.com>
+ */
+
+#include <asm/unaligned.h>
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "ksz_common.h"
+
+#define KSZ8795_SPI_ADDR_SHIFT			12
+#define KSZ8795_SPI_ADDR_ALIGN			3
+#define KSZ8795_SPI_TURNAROUND_SHIFT		1
+
+#define KSZ8863_SPI_ADDR_SHIFT			8
+#define KSZ8863_SPI_ADDR_ALIGN			8
+#define KSZ8863_SPI_TURNAROUND_SHIFT		0
+
+#define KSZ9477_SPI_ADDR_SHIFT			24
+#define KSZ9477_SPI_ADDR_ALIGN			3
+#define KSZ9477_SPI_TURNAROUND_SHIFT		5
+
+KSZ_REGMAP_TABLE(ksz8795, 16, KSZ8795_SPI_ADDR_SHIFT,
+		 KSZ8795_SPI_TURNAROUND_SHIFT, KSZ8795_SPI_ADDR_ALIGN);
+
+KSZ_REGMAP_TABLE(ksz8863, 16, KSZ8863_SPI_ADDR_SHIFT,
+		 KSZ8863_SPI_TURNAROUND_SHIFT, KSZ8863_SPI_ADDR_ALIGN);
+
+KSZ_REGMAP_TABLE(ksz9477, 32, KSZ9477_SPI_ADDR_SHIFT,
+		 KSZ9477_SPI_TURNAROUND_SHIFT, KSZ9477_SPI_ADDR_ALIGN);
+
+static int ksz_spi_probe(struct spi_device *spi)
+{
+	const struct regmap_config *regmap_config;
+	const struct ksz_chip_data *chip;
+	struct device *ddev = &spi->dev;
+	struct regmap_config rc;
+	struct ksz_device *dev;
+	int i, ret = 0;
+
+	dev = ksz_switch_alloc(&spi->dev, spi);
+	if (!dev)
+		return -ENOMEM;
+
+	chip = device_get_match_data(ddev);
+	if (!chip)
+		return -EINVAL;
+
+	if (chip->chip_id == KSZ8830_CHIP_ID)
+		regmap_config = ksz8863_regmap_config;
+	else if (chip->chip_id == KSZ8795_CHIP_ID ||
+		 chip->chip_id == KSZ8794_CHIP_ID ||
+		 chip->chip_id == KSZ8765_CHIP_ID)
+		regmap_config = ksz8795_regmap_config;
+	else
+		regmap_config = ksz9477_regmap_config;
+
+	for (i = 0; i < ARRAY_SIZE(ksz8795_regmap_config); i++) {
+		rc = regmap_config[i];
+		rc.lock_arg = &dev->regmap_mutex;
+		rc.wr_table = chip->wr_table;
+		rc.rd_table = chip->rd_table;
+		dev->regmap[i] = devm_regmap_init_spi(spi, &rc);
+
+		if (IS_ERR(dev->regmap[i])) {
+			ret = PTR_ERR(dev->regmap[i]);
+			dev_err(&spi->dev,
+				"Failed to initialize regmap%i: %d\n",
+				regmap_config[i].val_bits, ret);
+			return ret;
+		}
+	}
+
+	if (spi->dev.platform_data)
+		dev->pdata = spi->dev.platform_data;
+
+	/* setup spi */
+	spi->mode = SPI_MODE_3;
+	ret = spi_setup(spi);
+	if (ret)
+		return ret;
+
+	dev->irq = spi->irq;
+
+	ret = ksz_switch_register(dev);
+
+	/* Main DSA driver may not be started yet. */
+	if (ret)
+		return ret;
+
+	spi_set_drvdata(spi, dev);
+
+	return 0;
+}
+
+static void ksz_spi_remove(struct spi_device *spi)
+{
+	struct ksz_device *dev = spi_get_drvdata(spi);
+
+	if (dev)
+		ksz_switch_remove(dev);
+}
+
+static void ksz_spi_shutdown(struct spi_device *spi)
+{
+	struct ksz_device *dev = spi_get_drvdata(spi);
+
+	if (!dev)
+		return;
+
+	if (dev->dev_ops->reset)
+		dev->dev_ops->reset(dev);
+
+	dsa_switch_shutdown(dev->ds);
+
+	spi_set_drvdata(spi, NULL);
+}
+
+static const struct of_device_id ksz_dt_ids[] = {
+	{
+		.compatible = "microchip,ksz8765",
+		.data = &ksz_switch_chips[KSZ8765]
+	},
+	{
+		.compatible = "microchip,ksz8794",
+		.data = &ksz_switch_chips[KSZ8794]
+	},
+	{
+		.compatible = "microchip,ksz8795",
+		.data = &ksz_switch_chips[KSZ8795]
+	},
+	{
+		.compatible = "microchip,ksz8863",
+		.data = &ksz_switch_chips[KSZ8830]
+	},
+	{
+		.compatible = "microchip,ksz8873",
+		.data = &ksz_switch_chips[KSZ8830]
+	},
+	{
+		.compatible = "microchip,ksz9477",
+		.data = &ksz_switch_chips[KSZ9477]
+	},
+	{
+		.compatible = "microchip,ksz9896",
+		.data = &ksz_switch_chips[KSZ9896]
+	},
+	{
+		.compatible = "microchip,ksz9897",
+		.data = &ksz_switch_chips[KSZ9897]
+	},
+	{
+		.compatible = "microchip,ksz9893",
+		.data = &ksz_switch_chips[KSZ9893]
+	},
+	{
+		.compatible = "microchip,ksz9563",
+		.data = &ksz_switch_chips[KSZ9893]
+	},
+	{
+		.compatible = "microchip,ksz8563",
+		.data = &ksz_switch_chips[KSZ8563]
+	},
+	{
+		.compatible = "microchip,ksz9567",
+		.data = &ksz_switch_chips[KSZ9567]
+	},
+	{
+		.compatible = "microchip,lan9370",
+		.data = &ksz_switch_chips[LAN9370]
+	},
+	{
+		.compatible = "microchip,lan9371",
+		.data = &ksz_switch_chips[LAN9371]
+	},
+	{
+		.compatible = "microchip,lan9372",
+		.data = &ksz_switch_chips[LAN9372]
+	},
+	{
+		.compatible = "microchip,lan9373",
+		.data = &ksz_switch_chips[LAN9373]
+	},
+	{
+		.compatible = "microchip,lan9374",
+		.data = &ksz_switch_chips[LAN9374]
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ksz_dt_ids);
+
+static const struct spi_device_id ksz_spi_ids[] = {
+	{ "ksz8765" },
+	{ "ksz8794" },
+	{ "ksz8795" },
+	{ "ksz8863" },
+	{ "ksz8873" },
+	{ "ksz9477" },
+	{ "ksz9896" },
+	{ "ksz9897" },
+	{ "ksz9893" },
+	{ "ksz9563" },
+	{ "ksz8563" },
+	{ "ksz9567" },
+	{ "lan9370" },
+	{ "lan9371" },
+	{ "lan9372" },
+	{ "lan9373" },
+	{ "lan9374" },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, ksz_spi_ids);
+
+static struct spi_driver ksz_spi_driver = {
+	.driver = {
+		.name	= "ksz-switch",
+		.owner	= THIS_MODULE,
+		.of_match_table = ksz_dt_ids,
+	},
+	.id_table = ksz_spi_ids,
+	.probe	= ksz_spi_probe,
+	.remove	= ksz_spi_remove,
+	.shutdown = ksz_spi_shutdown,
+};
+
+module_spi_driver(ksz_spi_driver);
+
+MODULE_ALIAS("spi:ksz9477");
+MODULE_ALIAS("spi:ksz9896");
+MODULE_ALIAS("spi:ksz9897");
+MODULE_ALIAS("spi:ksz9893");
+MODULE_ALIAS("spi:ksz9563");
+MODULE_ALIAS("spi:ksz8563");
+MODULE_ALIAS("spi:ksz9567");
+MODULE_ALIAS("spi:lan937x");
+MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>");
+MODULE_DESCRIPTION("Microchip ksz Series Switch SPI Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/microchip/lan937x.h b/drivers/net/dsa/microchip/lan937x.h
new file mode 100644
index 000000000..8e9e66d67
--- /dev/null
+++ b/drivers/net/dsa/microchip/lan937x.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Microchip lan937x dev ops headers
+ * Copyright (C) 2019-2022 Microchip Technology Inc.
+ */
+
+#ifndef __LAN937X_CFG_H
+#define __LAN937X_CFG_H
+
+int lan937x_reset_switch(struct ksz_device *dev);
+int lan937x_setup(struct dsa_switch *ds);
+void lan937x_teardown(struct dsa_switch *ds);
+void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port);
+void lan937x_config_cpu_port(struct dsa_switch *ds);
+int lan937x_switch_init(struct ksz_device *dev);
+void lan937x_switch_exit(struct ksz_device *dev);
+int lan937x_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data);
+int lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val);
+int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu);
+void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
+			      struct phylink_config *config);
+void lan937x_setup_rgmii_delay(struct ksz_device *dev, int port);
+int lan937x_set_ageing_time(struct ksz_device *dev, unsigned int msecs);
+#endif
diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c
new file mode 100644
index 000000000..7e4f307a0
--- /dev/null
+++ b/drivers/net/dsa/microchip/lan937x_main.c
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Microchip LAN937X switch driver main logic
+ * Copyright (C) 2019-2022 Microchip Technology Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/iopoll.h>
+#include <linux/phy.h>
+#include <linux/of_net.h>
+#include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
+#include <linux/math.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "lan937x_reg.h"
+#include "ksz_common.h"
+#include "lan937x.h"
+
+static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
+{
+	return regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
+}
+
+static int lan937x_port_cfg(struct ksz_device *dev, int port, int offset,
+			    u8 bits, bool set)
+{
+	return regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
+				  bits, set ? bits : 0);
+}
+
+static int lan937x_enable_spi_indirect_access(struct ksz_device *dev)
+{
+	u16 data16;
+	int ret;
+
+	/* Enable Phy access through SPI */
+	ret = lan937x_cfg(dev, REG_GLOBAL_CTRL_0, SW_PHY_REG_BLOCK, false);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz_read16(dev, REG_VPHY_SPECIAL_CTRL__2, &data16);
+	if (ret < 0)
+		return ret;
+
+	/* Allow SPI access */
+	data16 |= VPHY_SPI_INDIRECT_ENABLE;
+
+	return ksz_write16(dev, REG_VPHY_SPECIAL_CTRL__2, data16);
+}
+
+static int lan937x_vphy_ind_addr_wr(struct ksz_device *dev, int addr, int reg)
+{
+	u16 addr_base = REG_PORT_T1_PHY_CTRL_BASE;
+	u16 temp;
+
+	/* get register address based on the logical port */
+	temp = PORT_CTRL_ADDR(addr, (addr_base + (reg << 2)));
+
+	return ksz_write16(dev, REG_VPHY_IND_ADDR__2, temp);
+}
+
+static int lan937x_internal_phy_write(struct ksz_device *dev, int addr, int reg,
+				      u16 val)
+{
+	unsigned int value;
+	int ret;
+
+	/* Check for internal phy port */
+	if (!dev->info->internal_phy[addr])
+		return -EOPNOTSUPP;
+
+	ret = lan937x_vphy_ind_addr_wr(dev, addr, reg);
+	if (ret < 0)
+		return ret;
+
+	/* Write the data to be written to the VPHY reg */
+	ret = ksz_write16(dev, REG_VPHY_IND_DATA__2, val);
+	if (ret < 0)
+		return ret;
+
+	/* Write the Write En and Busy bit */
+	ret = ksz_write16(dev, REG_VPHY_IND_CTRL__2,
+			  (VPHY_IND_WRITE | VPHY_IND_BUSY));
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read_poll_timeout(dev->regmap[1], REG_VPHY_IND_CTRL__2,
+				       value, !(value & VPHY_IND_BUSY), 10,
+				       1000);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to write phy register\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int lan937x_internal_phy_read(struct ksz_device *dev, int addr, int reg,
+				     u16 *val)
+{
+	unsigned int value;
+	int ret;
+
+	/* Check for internal phy port, return 0xffff for non-existent phy */
+	if (!dev->info->internal_phy[addr])
+		return 0xffff;
+
+	ret = lan937x_vphy_ind_addr_wr(dev, addr, reg);
+	if (ret < 0)
+		return ret;
+
+	/* Write Read and Busy bit to start the transaction */
+	ret = ksz_write16(dev, REG_VPHY_IND_CTRL__2, VPHY_IND_BUSY);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read_poll_timeout(dev->regmap[1], REG_VPHY_IND_CTRL__2,
+				       value, !(value & VPHY_IND_BUSY), 10,
+				       1000);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to read phy register\n");
+		return ret;
+	}
+
+	/* Read the VPHY register which has the PHY data */
+	return ksz_read16(dev, REG_VPHY_IND_DATA__2, val);
+}
+
+int lan937x_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data)
+{
+	return lan937x_internal_phy_read(dev, addr, reg, data);
+}
+
+int lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val)
+{
+	return lan937x_internal_phy_write(dev, addr, reg, val);
+}
+
+int lan937x_reset_switch(struct ksz_device *dev)
+{
+	u32 data32;
+	int ret;
+
+	/* reset switch */
+	ret = lan937x_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
+	if (ret < 0)
+		return ret;
+
+	/* Enable Auto Aging */
+	ret = lan937x_cfg(dev, REG_SW_LUE_CTRL_1, SW_LINK_AUTO_AGING, true);
+	if (ret < 0)
+		return ret;
+
+	/* disable interrupts */
+	ret = ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz_write32(dev, REG_SW_INT_STATUS__4, POR_READY_INT);
+	if (ret < 0)
+		return ret;
+
+	ret = ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0xFF);
+	if (ret < 0)
+		return ret;
+
+	return ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
+}
+
+void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+	const u32 *masks = dev->info->masks;
+	const u16 *regs = dev->info->regs;
+	struct dsa_switch *ds = dev->ds;
+	u8 member;
+
+	/* enable tag tail for host port */
+	if (cpu_port)
+		lan937x_port_cfg(dev, port, REG_PORT_CTRL_0,
+				 PORT_TAIL_TAG_ENABLE, true);
+
+	/* set back pressure for half duplex */
+	lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE,
+			 true);
+
+	/* enable 802.1p priority */
+	lan937x_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
+
+	if (!dev->info->internal_phy[port])
+		lan937x_port_cfg(dev, port, regs[P_XMII_CTRL_0],
+				 masks[P_MII_TX_FLOW_CTRL] |
+				 masks[P_MII_RX_FLOW_CTRL],
+				 true);
+
+	if (cpu_port)
+		member = dsa_user_ports(ds);
+	else
+		member = BIT(dsa_upstream_port(ds, port));
+
+	dev->dev_ops->cfg_port_member(dev, port, member);
+}
+
+void lan937x_config_cpu_port(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	struct dsa_port *dp;
+
+	dsa_switch_for_each_cpu_port(dp, ds) {
+		if (dev->info->cpu_ports & (1 << dp->index)) {
+			dev->cpu_port = dp->index;
+
+			/* enable cpu port */
+			lan937x_port_setup(dev, dp->index, true);
+		}
+	}
+
+	dsa_switch_for_each_user_port(dp, ds) {
+		ksz_port_stp_state_set(ds, dp->index, BR_STATE_DISABLED);
+	}
+}
+
+int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu)
+{
+	struct dsa_switch *ds = dev->ds;
+	int ret;
+
+	new_mtu += VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+	if (dsa_is_cpu_port(ds, port))
+		new_mtu += LAN937X_TAG_LEN;
+
+	if (new_mtu >= FR_MIN_SIZE)
+		ret = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0,
+				       PORT_JUMBO_PACKET, true);
+	else
+		ret = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0,
+				       PORT_JUMBO_PACKET, false);
+	if (ret < 0) {
+		dev_err(ds->dev, "failed to enable jumbo\n");
+		return ret;
+	}
+
+	/* Write the frame size in PORT_MAX_FR_SIZE register */
+	ksz_pwrite16(dev, port, PORT_MAX_FR_SIZE, new_mtu);
+
+	return 0;
+}
+
+int lan937x_set_ageing_time(struct ksz_device *dev, unsigned int msecs)
+{
+	u32 secs = msecs / 1000;
+	u32 value;
+	int ret;
+
+	value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs);
+
+	ret = ksz_write8(dev, REG_SW_AGE_PERIOD__1, value);
+	if (ret < 0)
+		return ret;
+
+	value = FIELD_GET(SW_AGE_PERIOD_19_8_M, secs);
+
+	return ksz_write16(dev, REG_SW_AGE_PERIOD__2, value);
+}
+
+static void lan937x_set_tune_adj(struct ksz_device *dev, int port,
+				 u16 reg, u8 val)
+{
+	u16 data16;
+
+	ksz_pread16(dev, port, reg, &data16);
+
+	/* Update tune Adjust */
+	data16 |= FIELD_PREP(PORT_TUNE_ADJ, val);
+	ksz_pwrite16(dev, port, reg, data16);
+
+	/* write DLL reset to take effect */
+	data16 |= PORT_DLL_RESET;
+	ksz_pwrite16(dev, port, reg, data16);
+}
+
+static void lan937x_set_rgmii_tx_delay(struct ksz_device *dev, int port)
+{
+	u8 val;
+
+	/* Apply different codes based on the ports as per characterization
+	 * results
+	 */
+	val = (port == LAN937X_RGMII_1_PORT) ? RGMII_1_TX_DELAY_2NS :
+		RGMII_2_TX_DELAY_2NS;
+
+	lan937x_set_tune_adj(dev, port, REG_PORT_XMII_CTRL_5, val);
+}
+
+static void lan937x_set_rgmii_rx_delay(struct ksz_device *dev, int port)
+{
+	u8 val;
+
+	val = (port == LAN937X_RGMII_1_PORT) ? RGMII_1_RX_DELAY_2NS :
+		RGMII_2_RX_DELAY_2NS;
+
+	lan937x_set_tune_adj(dev, port, REG_PORT_XMII_CTRL_4, val);
+}
+
+void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
+			      struct phylink_config *config)
+{
+	config->mac_capabilities = MAC_100FD;
+
+	if (dev->info->supports_rgmii[port]) {
+		/* MII/RMII/RGMII ports */
+		config->mac_capabilities |= MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+					    MAC_100HD | MAC_10 | MAC_1000FD;
+	}
+}
+
+void lan937x_setup_rgmii_delay(struct ksz_device *dev, int port)
+{
+	struct ksz_port *p = &dev->ports[port];
+
+	if (p->rgmii_tx_val) {
+		lan937x_set_rgmii_tx_delay(dev, port);
+		dev_info(dev->dev, "Applied rgmii tx delay for the port %d\n",
+			 port);
+	}
+
+	if (p->rgmii_rx_val) {
+		lan937x_set_rgmii_rx_delay(dev, port);
+		dev_info(dev->dev, "Applied rgmii rx delay for the port %d\n",
+			 port);
+	}
+}
+
+int lan937x_switch_init(struct ksz_device *dev)
+{
+	dev->port_mask = (1 << dev->info->port_cnt) - 1;
+
+	return 0;
+}
+
+int lan937x_setup(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	int ret;
+
+	/* enable Indirect Access from SPI to the VPHY registers */
+	ret = lan937x_enable_spi_indirect_access(dev);
+	if (ret < 0) {
+		dev_err(dev->dev, "failed to enable spi indirect access");
+		return ret;
+	}
+
+	/* The VLAN aware is a global setting. Mixed vlan
+	 * filterings are not supported.
+	 */
+	ds->vlan_filtering_is_global = true;
+
+	/* Enable aggressive back off for half duplex & UNH mode */
+	lan937x_cfg(dev, REG_SW_MAC_CTRL_0,
+		    (SW_PAUSE_UNH_MODE | SW_NEW_BACKOFF | SW_AGGR_BACKOFF),
+		    true);
+
+	/* If NO_EXC_COLLISION_DROP bit is set, the switch will not drop
+	 * packets when 16 or more collisions occur
+	 */
+	lan937x_cfg(dev, REG_SW_MAC_CTRL_1, NO_EXC_COLLISION_DROP, true);
+
+	/* enable global MIB counter freeze function */
+	lan937x_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true);
+
+	/* disable CLK125 & CLK25, 1: disable, 0: enable */
+	lan937x_cfg(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1,
+		    (SW_CLK125_ENB | SW_CLK25_ENB), true);
+
+	return 0;
+}
+
+void lan937x_teardown(struct dsa_switch *ds)
+{
+
+}
+
+void lan937x_switch_exit(struct ksz_device *dev)
+{
+	lan937x_reset_switch(dev);
+}
+
+MODULE_AUTHOR("Arun Ramadoss <arun.ramadoss@microchip.com>");
+MODULE_DESCRIPTION("Microchip LAN937x Series Switch DSA Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/microchip/lan937x_reg.h b/drivers/net/dsa/microchip/lan937x_reg.h
new file mode 100644
index 000000000..5bc16a4c4
--- /dev/null
+++ b/drivers/net/dsa/microchip/lan937x_reg.h
@@ -0,0 +1,202 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Microchip LAN937X switch register definitions
+ * Copyright (C) 2019-2021 Microchip Technology Inc.
+ */
+#ifndef __LAN937X_REG_H
+#define __LAN937X_REG_H
+
+#define PORT_CTRL_ADDR(port, addr)	((addr) | (((port) + 1)  << 12))
+
+/* 0 - Operation */
+#define REG_GLOBAL_CTRL_0		0x0007
+
+#define SW_PHY_REG_BLOCK		BIT(7)
+#define SW_FAST_MODE			BIT(3)
+#define SW_FAST_MODE_OVERRIDE		BIT(2)
+
+#define REG_SW_INT_STATUS__4		0x0010
+#define REG_SW_INT_MASK__4		0x0014
+
+#define LUE_INT				BIT(31)
+#define TRIG_TS_INT			BIT(30)
+#define APB_TIMEOUT_INT			BIT(29)
+#define OVER_TEMP_INT			BIT(28)
+#define HSR_INT				BIT(27)
+#define PIO_INT				BIT(26)
+#define POR_READY_INT			BIT(25)
+
+#define SWITCH_INT_MASK			\
+	(LUE_INT | TRIG_TS_INT | APB_TIMEOUT_INT | OVER_TEMP_INT | HSR_INT | \
+	 PIO_INT | POR_READY_INT)
+
+#define REG_SW_PORT_INT_STATUS__4	0x0018
+#define REG_SW_PORT_INT_MASK__4		0x001C
+
+/* 1 - Global */
+#define REG_SW_GLOBAL_OUTPUT_CTRL__1	0x0103
+#define SW_CLK125_ENB			BIT(1)
+#define SW_CLK25_ENB			BIT(0)
+
+/* 3 - Operation Control */
+#define REG_SW_OPERATION		0x0300
+
+#define SW_DOUBLE_TAG			BIT(7)
+#define SW_OVER_TEMP_ENABLE		BIT(2)
+#define SW_RESET			BIT(1)
+
+#define REG_SW_LUE_CTRL_0		0x0310
+
+#define SW_VLAN_ENABLE			BIT(7)
+#define SW_DROP_INVALID_VID		BIT(6)
+#define SW_AGE_CNT_M			0x7
+#define SW_AGE_CNT_S			3
+#define SW_RESV_MCAST_ENABLE		BIT(2)
+
+#define REG_SW_LUE_CTRL_1		0x0311
+
+#define UNICAST_LEARN_DISABLE		BIT(7)
+#define SW_FLUSH_STP_TABLE		BIT(5)
+#define SW_FLUSH_MSTP_TABLE		BIT(4)
+#define SW_SRC_ADDR_FILTER		BIT(3)
+#define SW_AGING_ENABLE			BIT(2)
+#define SW_FAST_AGING			BIT(1)
+#define SW_LINK_AUTO_AGING		BIT(0)
+
+#define REG_SW_AGE_PERIOD__1		0x0313
+#define SW_AGE_PERIOD_7_0_M		GENMASK(7, 0)
+
+#define REG_SW_AGE_PERIOD__2		0x0320
+#define SW_AGE_PERIOD_19_8_M		GENMASK(19, 8)
+
+#define REG_SW_MAC_CTRL_0		0x0330
+#define SW_NEW_BACKOFF			BIT(7)
+#define SW_PAUSE_UNH_MODE		BIT(1)
+#define SW_AGGR_BACKOFF			BIT(0)
+
+#define REG_SW_MAC_CTRL_1		0x0331
+#define SW_SHORT_IFG			BIT(7)
+#define MULTICAST_STORM_DISABLE		BIT(6)
+#define SW_BACK_PRESSURE		BIT(5)
+#define FAIR_FLOW_CTRL			BIT(4)
+#define NO_EXC_COLLISION_DROP		BIT(3)
+#define SW_LEGAL_PACKET_DISABLE		BIT(1)
+#define SW_PASS_SHORT_FRAME		BIT(0)
+
+#define REG_SW_MAC_CTRL_6		0x0336
+#define SW_MIB_COUNTER_FLUSH		BIT(7)
+#define SW_MIB_COUNTER_FREEZE		BIT(6)
+
+/* 4 - LUE */
+#define REG_SW_ALU_STAT_CTRL__4		0x041C
+
+#define REG_SW_ALU_VAL_B		0x0424
+#define ALU_V_OVERRIDE			BIT(31)
+#define ALU_V_USE_FID			BIT(30)
+#define ALU_V_PORT_MAP			0xFF
+
+/* 7 - VPhy */
+#define REG_VPHY_IND_ADDR__2		0x075C
+#define REG_VPHY_IND_DATA__2		0x0760
+
+#define REG_VPHY_IND_CTRL__2		0x0768
+
+#define VPHY_IND_WRITE			BIT(1)
+#define VPHY_IND_BUSY			BIT(0)
+
+#define REG_VPHY_SPECIAL_CTRL__2	0x077C
+#define VPHY_SMI_INDIRECT_ENABLE	BIT(15)
+#define VPHY_SW_LOOPBACK		BIT(14)
+#define VPHY_MDIO_INTERNAL_ENABLE	BIT(13)
+#define VPHY_SPI_INDIRECT_ENABLE	BIT(12)
+#define VPHY_PORT_MODE_M		0x3
+#define VPHY_PORT_MODE_S		8
+#define VPHY_MODE_RGMII			0
+#define VPHY_MODE_MII_PHY		1
+#define VPHY_MODE_SGMII			2
+#define VPHY_MODE_RMII_PHY		3
+#define VPHY_SW_COLLISION_TEST		BIT(7)
+#define VPHY_SPEED_DUPLEX_STAT_M	0x7
+#define VPHY_SPEED_DUPLEX_STAT_S	2
+#define VPHY_SPEED_1000			BIT(4)
+#define VPHY_SPEED_100			BIT(3)
+#define VPHY_FULL_DUPLEX		BIT(2)
+
+/* Port Registers */
+
+/* 0 - Operation */
+#define REG_PORT_INT_STATUS		0x001B
+#define REG_PORT_INT_MASK		0x001F
+
+#define PORT_TAS_INT			BIT(5)
+#define PORT_QCI_INT			BIT(4)
+#define PORT_SGMII_INT			BIT(3)
+#define PORT_PTP_INT			BIT(2)
+#define PORT_PHY_INT			BIT(1)
+#define PORT_ACL_INT			BIT(0)
+
+#define PORT_SRC_PHY_INT		1
+
+#define REG_PORT_CTRL_0			0x0020
+
+#define PORT_MAC_LOOPBACK		BIT(7)
+#define PORT_MAC_REMOTE_LOOPBACK	BIT(6)
+#define PORT_K2L_INSERT_ENABLE		BIT(5)
+#define PORT_K2L_DEBUG_ENABLE		BIT(4)
+#define PORT_TAIL_TAG_ENABLE		BIT(2)
+#define PORT_QUEUE_SPLIT_ENABLE		0x3
+
+/* 1 - Phy */
+#define REG_PORT_T1_PHY_CTRL_BASE	0x0100
+
+/* 3 - xMII */
+#define PORT_SGMII_SEL			BIT(7)
+#define PORT_GRXC_ENABLE		BIT(0)
+
+#define PORT_MII_SEL_EDGE		BIT(5)
+
+#define REG_PORT_XMII_CTRL_4		0x0304
+#define REG_PORT_XMII_CTRL_5		0x0306
+
+#define PORT_DLL_RESET			BIT(15)
+#define PORT_TUNE_ADJ			GENMASK(13, 7)
+
+/* 4 - MAC */
+#define REG_PORT_MAC_CTRL_0		0x0400
+#define PORT_CHECK_LENGTH		BIT(2)
+#define PORT_BROADCAST_STORM		BIT(1)
+#define PORT_JUMBO_PACKET		BIT(0)
+
+#define REG_PORT_MAC_CTRL_1		0x0401
+#define PORT_BACK_PRESSURE		BIT(3)
+#define PORT_PASS_ALL			BIT(0)
+
+#define PORT_MAX_FR_SIZE		0x404
+#define FR_MIN_SIZE		1522
+
+/* 8 - Classification and Policing */
+#define REG_PORT_MRI_PRIO_CTRL		0x0801
+#define PORT_HIGHEST_PRIO		BIT(7)
+#define PORT_OR_PRIO			BIT(6)
+#define PORT_MAC_PRIO_ENABLE		BIT(4)
+#define PORT_VLAN_PRIO_ENABLE		BIT(3)
+#define PORT_802_1P_PRIO_ENABLE		BIT(2)
+#define PORT_DIFFSERV_PRIO_ENABLE	BIT(1)
+#define PORT_ACL_PRIO_ENABLE		BIT(0)
+
+#define P_PRIO_CTRL			REG_PORT_MRI_PRIO_CTRL
+
+/* The port number as per the datasheet */
+#define RGMII_2_PORT_NUM		5
+#define RGMII_1_PORT_NUM		6
+
+#define LAN937X_RGMII_2_PORT		(RGMII_2_PORT_NUM - 1)
+#define LAN937X_RGMII_1_PORT		(RGMII_1_PORT_NUM - 1)
+
+#define RGMII_1_TX_DELAY_2NS		2
+#define RGMII_2_TX_DELAY_2NS		0
+#define RGMII_1_RX_DELAY_2NS		0x1B
+#define RGMII_2_RX_DELAY_2NS		0x14
+
+#define LAN937X_TAG_LEN			2
+
+#endif