Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 116 insertions, 0 deletions

diff --git a/drivers/net/ethernet/altera/altera_sgdmahw.h b/drivers/net/ethernet/altera/altera_sgdmahw.h
new file mode 100644
index 000000000..3304518e2
--- /dev/null
+++ b/drivers/net/ethernet/altera/altera_sgdmahw.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Altera TSE SGDMA and MSGDMA Linux driver
+ * Copyright (C) 2014 Altera Corporation. All rights reserved
+ */
+
+#ifndef __ALTERA_SGDMAHW_H__
+#define __ALTERA_SGDMAHW_H__
+
+/* SGDMA descriptor structure */
+struct sgdma_descrip {
+	u32	raddr; /* address of data to be read */
+	u32	pad1;
+	u32	waddr;
+	u32	pad2;
+	u32	next;
+	u32	pad3;
+	u16	bytes;
+	u8	rburst;
+	u8	wburst;
+	u16	bytes_xferred;	/* 16 bits, bytes xferred */
+
+	/* bit 0: error
+	 * bit 1: length error
+	 * bit 2: crc error
+	 * bit 3: truncated error
+	 * bit 4: phy error
+	 * bit 5: collision error
+	 * bit 6: reserved
+	 * bit 7: status eop for recv case
+	 */
+	u8	status;
+
+	/* bit 0: eop
+	 * bit 1: read_fixed
+	 * bit 2: write fixed
+	 * bits 3,4,5,6: Channel (always 0)
+	 * bit 7: hardware owned
+	 */
+	u8	control;
+} __packed;
+
+#define SGDMA_DESC_LEN	sizeof(struct sgdma_descrip)
+
+#define SGDMA_STATUS_ERR		BIT(0)
+#define SGDMA_STATUS_LENGTH_ERR		BIT(1)
+#define SGDMA_STATUS_CRC_ERR		BIT(2)
+#define SGDMA_STATUS_TRUNC_ERR		BIT(3)
+#define SGDMA_STATUS_PHY_ERR		BIT(4)
+#define SGDMA_STATUS_COLL_ERR		BIT(5)
+#define SGDMA_STATUS_EOP		BIT(7)
+
+#define SGDMA_CONTROL_EOP		BIT(0)
+#define SGDMA_CONTROL_RD_FIXED		BIT(1)
+#define SGDMA_CONTROL_WR_FIXED		BIT(2)
+
+/* Channel is always 0, so just zero initialize it */
+
+#define SGDMA_CONTROL_HW_OWNED		BIT(7)
+
+/* SGDMA register space */
+struct sgdma_csr {
+	/* bit 0: error
+	 * bit 1: eop
+	 * bit 2: descriptor completed
+	 * bit 3: chain completed
+	 * bit 4: busy
+	 * remainder reserved
+	 */
+	u32	status;
+	u32	pad1[3];
+
+	/* bit 0: interrupt on error
+	 * bit 1: interrupt on eop
+	 * bit 2: interrupt after every descriptor
+	 * bit 3: interrupt after last descrip in a chain
+	 * bit 4: global interrupt enable
+	 * bit 5: starts descriptor processing
+	 * bit 6: stop core on dma error
+	 * bit 7: interrupt on max descriptors
+	 * bits 8-15: max descriptors to generate interrupt
+	 * bit 16: Software reset
+	 * bit 17: clears owned by hardware if 0, does not clear otherwise
+	 * bit 18: enables descriptor polling mode
+	 * bit 19-26: clocks before polling again
+	 * bit 27-30: reserved
+	 * bit 31: clear interrupt
+	 */
+	u32	control;
+	u32	pad2[3];
+	u32	next_descrip;
+	u32	pad3[3];
+};
+
+#define sgdma_csroffs(a) (offsetof(struct sgdma_csr, a))
+#define sgdma_descroffs(a) (offsetof(struct sgdma_descrip, a))
+
+#define SGDMA_STSREG_ERR	BIT(0) /* Error */
+#define SGDMA_STSREG_EOP	BIT(1) /* EOP */
+#define SGDMA_STSREG_DESCRIP	BIT(2) /* Descriptor completed */
+#define SGDMA_STSREG_CHAIN	BIT(3) /* Chain completed */
+#define SGDMA_STSREG_BUSY	BIT(4) /* Controller busy */
+
+#define SGDMA_CTRLREG_IOE	BIT(0) /* Interrupt on error */
+#define SGDMA_CTRLREG_IOEOP	BIT(1) /* Interrupt on EOP */
+#define SGDMA_CTRLREG_IDESCRIP	BIT(2) /* Interrupt after every descriptor */
+#define SGDMA_CTRLREG_ILASTD	BIT(3) /* Interrupt after last descriptor */
+#define SGDMA_CTRLREG_INTEN	BIT(4) /* Global Interrupt enable */
+#define SGDMA_CTRLREG_START	BIT(5) /* starts descriptor processing */
+#define SGDMA_CTRLREG_STOPERR	BIT(6) /* stop on dma error */
+#define SGDMA_CTRLREG_INTMAX	BIT(7) /* Interrupt on max descriptors */
+#define SGDMA_CTRLREG_RESET	BIT(16)/* Software reset */
+#define SGDMA_CTRLREG_COBHW	BIT(17)/* Clears owned by hardware */
+#define SGDMA_CTRLREG_POLL	BIT(18)/* enables descriptor polling mode */
+#define SGDMA_CTRLREG_CLRINT	BIT(31)/* Clears interrupt */
+
+#endif /* __ALTERA_SGDMAHW_H__ */