diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/net/ethernet/freescale/fec.h | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/ethernet/freescale/fec.h')
-rw-r--r-- | drivers/net/ethernet/freescale/fec.h | 675 |
1 files changed, 675 insertions, 0 deletions
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h new file mode 100644 index 000000000..33f84a30e --- /dev/null +++ b/drivers/net/ethernet/freescale/fec.h @@ -0,0 +1,675 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/****************************************************************************/ + +/* + * fec.h -- Fast Ethernet Controller for Motorola ColdFire SoC + * processors. + * + * (C) Copyright 2000-2005, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000-2001, Lineo (www.lineo.com) + */ + +/****************************************************************************/ +#ifndef FEC_H +#define FEC_H +/****************************************************************************/ + +#include <linux/clocksource.h> +#include <linux/net_tstamp.h> +#include <linux/pm_qos.h> +#include <linux/bpf.h> +#include <linux/ptp_clock_kernel.h> +#include <linux/timecounter.h> +#include <dt-bindings/firmware/imx/rsrc.h> +#include <linux/firmware/imx/sci.h> + +#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) || \ + defined(CONFIG_ARM64) || defined(CONFIG_COMPILE_TEST) +/* + * Just figures, Motorola would have to change the offsets for + * registers in the same peripheral device on different models + * of the ColdFire! + */ +#define FEC_IEVENT 0x004 /* Interrupt event reg */ +#define FEC_IMASK 0x008 /* Interrupt mask reg */ +#define FEC_R_DES_ACTIVE_0 0x010 /* Receive descriptor reg */ +#define FEC_X_DES_ACTIVE_0 0x014 /* Transmit descriptor reg */ +#define FEC_ECNTRL 0x024 /* Ethernet control reg */ +#define FEC_MII_DATA 0x040 /* MII manage frame reg */ +#define FEC_MII_SPEED 0x044 /* MII speed control reg */ +#define FEC_MIB_CTRLSTAT 0x064 /* MIB control/status reg */ +#define FEC_R_CNTRL 0x084 /* Receive control reg */ +#define FEC_X_CNTRL 0x0c4 /* Transmit Control reg */ +#define FEC_ADDR_LOW 0x0e4 /* Low 32bits MAC address */ +#define FEC_ADDR_HIGH 0x0e8 /* High 16bits MAC address */ +#define FEC_OPD 0x0ec /* Opcode + Pause duration */ +#define FEC_TXIC0 0x0f0 /* Tx Interrupt Coalescing for ring 0 */ +#define FEC_TXIC1 0x0f4 /* Tx Interrupt Coalescing for ring 1 */ +#define FEC_TXIC2 0x0f8 /* Tx Interrupt Coalescing for ring 2 */ +#define FEC_RXIC0 0x100 /* Rx Interrupt Coalescing for ring 0 */ +#define FEC_RXIC1 0x104 /* Rx Interrupt Coalescing for ring 1 */ +#define FEC_RXIC2 0x108 /* Rx Interrupt Coalescing for ring 2 */ +#define FEC_HASH_TABLE_HIGH 0x118 /* High 32bits hash table */ +#define FEC_HASH_TABLE_LOW 0x11c /* Low 32bits hash table */ +#define FEC_GRP_HASH_TABLE_HIGH 0x120 /* High 32bits hash table */ +#define FEC_GRP_HASH_TABLE_LOW 0x124 /* Low 32bits hash table */ +#define FEC_X_WMRK 0x144 /* FIFO transmit water mark */ +#define FEC_R_BOUND 0x14c /* FIFO receive bound reg */ +#define FEC_R_FSTART 0x150 /* FIFO receive start reg */ +#define FEC_R_DES_START_1 0x160 /* Receive descriptor ring 1 */ +#define FEC_X_DES_START_1 0x164 /* Transmit descriptor ring 1 */ +#define FEC_R_BUFF_SIZE_1 0x168 /* Maximum receive buff ring1 size */ +#define FEC_R_DES_START_2 0x16c /* Receive descriptor ring 2 */ +#define FEC_X_DES_START_2 0x170 /* Transmit descriptor ring 2 */ +#define FEC_R_BUFF_SIZE_2 0x174 /* Maximum receive buff ring2 size */ +#define FEC_R_DES_START_0 0x180 /* Receive descriptor ring */ +#define FEC_X_DES_START_0 0x184 /* Transmit descriptor ring */ +#define FEC_R_BUFF_SIZE_0 0x188 /* Maximum receive buff size */ +#define FEC_R_FIFO_RSFL 0x190 /* Receive FIFO section full threshold */ +#define FEC_R_FIFO_RSEM 0x194 /* Receive FIFO section empty threshold */ +#define FEC_R_FIFO_RAEM 0x198 /* Receive FIFO almost empty threshold */ +#define FEC_R_FIFO_RAFL 0x19c /* Receive FIFO almost full threshold */ +#define FEC_FTRL 0x1b0 /* Frame truncation receive length*/ +#define FEC_RACC 0x1c4 /* Receive Accelerator function */ +#define FEC_RCMR_1 0x1c8 /* Receive classification match ring 1 */ +#define FEC_RCMR_2 0x1cc /* Receive classification match ring 2 */ +#define FEC_DMA_CFG_1 0x1d8 /* DMA class configuration for ring 1 */ +#define FEC_DMA_CFG_2 0x1dc /* DMA class Configuration for ring 2 */ +#define FEC_R_DES_ACTIVE_1 0x1e0 /* Rx descriptor active for ring 1 */ +#define FEC_X_DES_ACTIVE_1 0x1e4 /* Tx descriptor active for ring 1 */ +#define FEC_R_DES_ACTIVE_2 0x1e8 /* Rx descriptor active for ring 2 */ +#define FEC_X_DES_ACTIVE_2 0x1ec /* Tx descriptor active for ring 2 */ +#define FEC_QOS_SCHEME 0x1f0 /* Set multi queues Qos scheme */ +#define FEC_LPI_SLEEP 0x1f4 /* Set IEEE802.3az LPI Sleep Ts time */ +#define FEC_LPI_WAKE 0x1f8 /* Set IEEE802.3az LPI Wake Tw time */ +#define FEC_MIIGSK_CFGR 0x300 /* MIIGSK Configuration reg */ +#define FEC_MIIGSK_ENR 0x308 /* MIIGSK Enable reg */ + +#define BM_MIIGSK_CFGR_MII 0x00 +#define BM_MIIGSK_CFGR_RMII 0x01 +#define BM_MIIGSK_CFGR_FRCONT_10M 0x40 + +#define RMON_T_DROP 0x200 /* Count of frames not cntd correctly */ +#define RMON_T_PACKETS 0x204 /* RMON TX packet count */ +#define RMON_T_BC_PKT 0x208 /* RMON TX broadcast pkts */ +#define RMON_T_MC_PKT 0x20c /* RMON TX multicast pkts */ +#define RMON_T_CRC_ALIGN 0x210 /* RMON TX pkts with CRC align err */ +#define RMON_T_UNDERSIZE 0x214 /* RMON TX pkts < 64 bytes, good CRC */ +#define RMON_T_OVERSIZE 0x218 /* RMON TX pkts > MAX_FL bytes good CRC */ +#define RMON_T_FRAG 0x21c /* RMON TX pkts < 64 bytes, bad CRC */ +#define RMON_T_JAB 0x220 /* RMON TX pkts > MAX_FL bytes, bad CRC */ +#define RMON_T_COL 0x224 /* RMON TX collision count */ +#define RMON_T_P64 0x228 /* RMON TX 64 byte pkts */ +#define RMON_T_P65TO127 0x22c /* RMON TX 65 to 127 byte pkts */ +#define RMON_T_P128TO255 0x230 /* RMON TX 128 to 255 byte pkts */ +#define RMON_T_P256TO511 0x234 /* RMON TX 256 to 511 byte pkts */ +#define RMON_T_P512TO1023 0x238 /* RMON TX 512 to 1023 byte pkts */ +#define RMON_T_P1024TO2047 0x23c /* RMON TX 1024 to 2047 byte pkts */ +#define RMON_T_P_GTE2048 0x240 /* RMON TX pkts > 2048 bytes */ +#define RMON_T_OCTETS 0x244 /* RMON TX octets */ +#define IEEE_T_DROP 0x248 /* Count of frames not counted crtly */ +#define IEEE_T_FRAME_OK 0x24c /* Frames tx'd OK */ +#define IEEE_T_1COL 0x250 /* Frames tx'd with single collision */ +#define IEEE_T_MCOL 0x254 /* Frames tx'd with multiple collision */ +#define IEEE_T_DEF 0x258 /* Frames tx'd after deferral delay */ +#define IEEE_T_LCOL 0x25c /* Frames tx'd with late collision */ +#define IEEE_T_EXCOL 0x260 /* Frames tx'd with excesv collisions */ +#define IEEE_T_MACERR 0x264 /* Frames tx'd with TX FIFO underrun */ +#define IEEE_T_CSERR 0x268 /* Frames tx'd with carrier sense err */ +#define IEEE_T_SQE 0x26c /* Frames tx'd with SQE err */ +#define IEEE_T_FDXFC 0x270 /* Flow control pause frames tx'd */ +#define IEEE_T_OCTETS_OK 0x274 /* Octet count for frames tx'd w/o err */ +#define RMON_R_PACKETS 0x284 /* RMON RX packet count */ +#define RMON_R_BC_PKT 0x288 /* RMON RX broadcast pkts */ +#define RMON_R_MC_PKT 0x28c /* RMON RX multicast pkts */ +#define RMON_R_CRC_ALIGN 0x290 /* RMON RX pkts with CRC alignment err */ +#define RMON_R_UNDERSIZE 0x294 /* RMON RX pkts < 64 bytes, good CRC */ +#define RMON_R_OVERSIZE 0x298 /* RMON RX pkts > MAX_FL bytes good CRC */ +#define RMON_R_FRAG 0x29c /* RMON RX pkts < 64 bytes, bad CRC */ +#define RMON_R_JAB 0x2a0 /* RMON RX pkts > MAX_FL bytes, bad CRC */ +#define RMON_R_RESVD_O 0x2a4 /* Reserved */ +#define RMON_R_P64 0x2a8 /* RMON RX 64 byte pkts */ +#define RMON_R_P65TO127 0x2ac /* RMON RX 65 to 127 byte pkts */ +#define RMON_R_P128TO255 0x2b0 /* RMON RX 128 to 255 byte pkts */ +#define RMON_R_P256TO511 0x2b4 /* RMON RX 256 to 511 byte pkts */ +#define RMON_R_P512TO1023 0x2b8 /* RMON RX 512 to 1023 byte pkts */ +#define RMON_R_P1024TO2047 0x2bc /* RMON RX 1024 to 2047 byte pkts */ +#define RMON_R_P_GTE2048 0x2c0 /* RMON RX pkts > 2048 bytes */ +#define RMON_R_OCTETS 0x2c4 /* RMON RX octets */ +#define IEEE_R_DROP 0x2c8 /* Count frames not counted correctly */ +#define IEEE_R_FRAME_OK 0x2cc /* Frames rx'd OK */ +#define IEEE_R_CRC 0x2d0 /* Frames rx'd with CRC err */ +#define IEEE_R_ALIGN 0x2d4 /* Frames rx'd with alignment err */ +#define IEEE_R_MACERR 0x2d8 /* Receive FIFO overflow count */ +#define IEEE_R_FDXFC 0x2dc /* Flow control pause frames rx'd */ +#define IEEE_R_OCTETS_OK 0x2e0 /* Octet cnt for frames rx'd w/o err */ + +#else + +#define FEC_ECNTRL 0x000 /* Ethernet control reg */ +#define FEC_IEVENT 0x004 /* Interrupt even reg */ +#define FEC_IMASK 0x008 /* Interrupt mask reg */ +#define FEC_IVEC 0x00c /* Interrupt vec status reg */ +#define FEC_R_DES_ACTIVE_0 0x010 /* Receive descriptor reg */ +#define FEC_R_DES_ACTIVE_1 FEC_R_DES_ACTIVE_0 +#define FEC_R_DES_ACTIVE_2 FEC_R_DES_ACTIVE_0 +#define FEC_X_DES_ACTIVE_0 0x014 /* Transmit descriptor reg */ +#define FEC_X_DES_ACTIVE_1 FEC_X_DES_ACTIVE_0 +#define FEC_X_DES_ACTIVE_2 FEC_X_DES_ACTIVE_0 +#define FEC_MII_DATA 0x040 /* MII manage frame reg */ +#define FEC_MII_SPEED 0x044 /* MII speed control reg */ +#define FEC_R_BOUND 0x08c /* FIFO receive bound reg */ +#define FEC_R_FSTART 0x090 /* FIFO receive start reg */ +#define FEC_X_WMRK 0x0a4 /* FIFO transmit water mark */ +#define FEC_X_FSTART 0x0ac /* FIFO transmit start reg */ +#define FEC_R_CNTRL 0x104 /* Receive control reg */ +#define FEC_MAX_FRM_LEN 0x108 /* Maximum frame length reg */ +#define FEC_X_CNTRL 0x144 /* Transmit Control reg */ +#define FEC_ADDR_LOW 0x3c0 /* Low 32bits MAC address */ +#define FEC_ADDR_HIGH 0x3c4 /* High 16bits MAC address */ +#define FEC_GRP_HASH_TABLE_HIGH 0x3c8 /* High 32bits hash table */ +#define FEC_GRP_HASH_TABLE_LOW 0x3cc /* Low 32bits hash table */ +#define FEC_R_DES_START_0 0x3d0 /* Receive descriptor ring */ +#define FEC_R_DES_START_1 FEC_R_DES_START_0 +#define FEC_R_DES_START_2 FEC_R_DES_START_0 +#define FEC_X_DES_START_0 0x3d4 /* Transmit descriptor ring */ +#define FEC_X_DES_START_1 FEC_X_DES_START_0 +#define FEC_X_DES_START_2 FEC_X_DES_START_0 +#define FEC_R_BUFF_SIZE_0 0x3d8 /* Maximum receive buff size */ +#define FEC_R_BUFF_SIZE_1 FEC_R_BUFF_SIZE_0 +#define FEC_R_BUFF_SIZE_2 FEC_R_BUFF_SIZE_0 +#define FEC_FIFO_RAM 0x400 /* FIFO RAM buffer */ +/* Not existed in real chip + * Just for pass build. + */ +#define FEC_RCMR_1 0xfff +#define FEC_RCMR_2 0xfff +#define FEC_DMA_CFG_1 0xfff +#define FEC_DMA_CFG_2 0xfff +#define FEC_TXIC0 0xfff +#define FEC_TXIC1 0xfff +#define FEC_TXIC2 0xfff +#define FEC_RXIC0 0xfff +#define FEC_RXIC1 0xfff +#define FEC_RXIC2 0xfff +#define FEC_LPI_SLEEP 0xfff +#define FEC_LPI_WAKE 0xfff +#endif /* CONFIG_M5272 */ + + +/* + * Define the buffer descriptor structure. + * + * Evidently, ARM SoCs have the FEC block generated in a + * little endian mode so adjust endianness accordingly. + */ +#if defined(CONFIG_ARM) || defined(CONFIG_ARM64) +#define fec32_to_cpu le32_to_cpu +#define fec16_to_cpu le16_to_cpu +#define cpu_to_fec32 cpu_to_le32 +#define cpu_to_fec16 cpu_to_le16 +#define __fec32 __le32 +#define __fec16 __le16 + +struct bufdesc { + __fec16 cbd_datlen; /* Data length */ + __fec16 cbd_sc; /* Control and status info */ + __fec32 cbd_bufaddr; /* Buffer address */ +}; +#else +#define fec32_to_cpu be32_to_cpu +#define fec16_to_cpu be16_to_cpu +#define cpu_to_fec32 cpu_to_be32 +#define cpu_to_fec16 cpu_to_be16 +#define __fec32 __be32 +#define __fec16 __be16 + +struct bufdesc { + __fec16 cbd_sc; /* Control and status info */ + __fec16 cbd_datlen; /* Data length */ + __fec32 cbd_bufaddr; /* Buffer address */ +}; +#endif + +struct bufdesc_ex { + struct bufdesc desc; + __fec32 cbd_esc; + __fec32 cbd_prot; + __fec32 cbd_bdu; + __fec32 ts; + __fec16 res0[4]; +}; + +/* + * The following definitions courtesy of commproc.h, which where + * Copyright (c) 1997 Dan Malek (dmalek@jlc.net). + */ +#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ +#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ +#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ +#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ +#define BD_SC_CM ((ushort)0x0200) /* Continuous mode */ +#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */ +#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ +#define BD_SC_BR ((ushort)0x0020) /* Break received */ +#define BD_SC_FR ((ushort)0x0010) /* Framing error */ +#define BD_SC_PR ((ushort)0x0008) /* Parity error */ +#define BD_SC_OV ((ushort)0x0002) /* Overrun */ +#define BD_SC_CD ((ushort)0x0001) /* ?? */ + +/* Buffer descriptor control/status used by Ethernet receive. + */ +#define BD_ENET_RX_EMPTY ((ushort)0x8000) +#define BD_ENET_RX_WRAP ((ushort)0x2000) +#define BD_ENET_RX_INTR ((ushort)0x1000) +#define BD_ENET_RX_LAST ((ushort)0x0800) +#define BD_ENET_RX_FIRST ((ushort)0x0400) +#define BD_ENET_RX_MISS ((ushort)0x0100) +#define BD_ENET_RX_LG ((ushort)0x0020) +#define BD_ENET_RX_NO ((ushort)0x0010) +#define BD_ENET_RX_SH ((ushort)0x0008) +#define BD_ENET_RX_CR ((ushort)0x0004) +#define BD_ENET_RX_OV ((ushort)0x0002) +#define BD_ENET_RX_CL ((ushort)0x0001) +#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ + +/* Enhanced buffer descriptor control/status used by Ethernet receive */ +#define BD_ENET_RX_VLAN 0x00000004 + +/* Buffer descriptor control/status used by Ethernet transmit. + */ +#define BD_ENET_TX_READY ((ushort)0x8000) +#define BD_ENET_TX_PAD ((ushort)0x4000) +#define BD_ENET_TX_WRAP ((ushort)0x2000) +#define BD_ENET_TX_INTR ((ushort)0x1000) +#define BD_ENET_TX_LAST ((ushort)0x0800) +#define BD_ENET_TX_TC ((ushort)0x0400) +#define BD_ENET_TX_DEF ((ushort)0x0200) +#define BD_ENET_TX_HB ((ushort)0x0100) +#define BD_ENET_TX_LC ((ushort)0x0080) +#define BD_ENET_TX_RL ((ushort)0x0040) +#define BD_ENET_TX_RCMASK ((ushort)0x003c) +#define BD_ENET_TX_UN ((ushort)0x0002) +#define BD_ENET_TX_CSL ((ushort)0x0001) +#define BD_ENET_TX_STATS ((ushort)0x0fff) /* All status bits */ + +/* enhanced buffer descriptor control/status used by Ethernet transmit */ +#define BD_ENET_TX_INT 0x40000000 +#define BD_ENET_TX_TS 0x20000000 +#define BD_ENET_TX_PINS 0x10000000 +#define BD_ENET_TX_IINS 0x08000000 + + +/* This device has up to three irqs on some platforms */ +#define FEC_IRQ_NUM 3 + +/* Maximum number of queues supported + * ENET with AVB IP can support up to 3 independent tx queues and rx queues. + * User can point the queue number that is less than or equal to 3. + */ +#define FEC_ENET_MAX_TX_QS 3 +#define FEC_ENET_MAX_RX_QS 3 + +#define FEC_R_DES_START(X) (((X) == 1) ? FEC_R_DES_START_1 : \ + (((X) == 2) ? \ + FEC_R_DES_START_2 : FEC_R_DES_START_0)) +#define FEC_X_DES_START(X) (((X) == 1) ? FEC_X_DES_START_1 : \ + (((X) == 2) ? \ + FEC_X_DES_START_2 : FEC_X_DES_START_0)) +#define FEC_R_BUFF_SIZE(X) (((X) == 1) ? FEC_R_BUFF_SIZE_1 : \ + (((X) == 2) ? \ + FEC_R_BUFF_SIZE_2 : FEC_R_BUFF_SIZE_0)) + +#define FEC_DMA_CFG(X) (((X) == 2) ? FEC_DMA_CFG_2 : FEC_DMA_CFG_1) + +#define DMA_CLASS_EN (1 << 16) +#define FEC_RCMR(X) (((X) == 2) ? FEC_RCMR_2 : FEC_RCMR_1) +#define IDLE_SLOPE_MASK 0xffff +#define IDLE_SLOPE_1 0x200 /* BW fraction: 0.5 */ +#define IDLE_SLOPE_2 0x200 /* BW fraction: 0.5 */ +#define IDLE_SLOPE(X) (((X) == 1) ? \ + (IDLE_SLOPE_1 & IDLE_SLOPE_MASK) : \ + (IDLE_SLOPE_2 & IDLE_SLOPE_MASK)) +#define RCMR_MATCHEN (0x1 << 16) +#define RCMR_CMP_CFG(v, n) (((v) & 0x7) << (n << 2)) +#define RCMR_CMP_1 (RCMR_CMP_CFG(0, 0) | RCMR_CMP_CFG(1, 1) | \ + RCMR_CMP_CFG(2, 2) | RCMR_CMP_CFG(3, 3)) +#define RCMR_CMP_2 (RCMR_CMP_CFG(4, 0) | RCMR_CMP_CFG(5, 1) | \ + RCMR_CMP_CFG(6, 2) | RCMR_CMP_CFG(7, 3)) +#define RCMR_CMP(X) (((X) == 1) ? RCMR_CMP_1 : RCMR_CMP_2) +#define FEC_TX_BD_FTYPE(X) (((X) & 0xf) << 20) + +/* The number of Tx and Rx buffers. These are allocated from the page + * pool. The code may assume these are power of two, so it it best + * to keep them that size. + * We don't need to allocate pages for the transmitter. We just use + * the skbuffer directly. + */ + +#define FEC_ENET_XDP_HEADROOM (XDP_PACKET_HEADROOM) + +#define FEC_ENET_RX_PAGES 256 +#define FEC_ENET_RX_FRSIZE (PAGE_SIZE - FEC_ENET_XDP_HEADROOM \ + - SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) +#define FEC_ENET_RX_FRPPG (PAGE_SIZE / FEC_ENET_RX_FRSIZE) +#define RX_RING_SIZE (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES) +#define FEC_ENET_TX_FRSIZE 2048 +#define FEC_ENET_TX_FRPPG (PAGE_SIZE / FEC_ENET_TX_FRSIZE) +#define TX_RING_SIZE 512 /* Must be power of two */ +#define TX_RING_MOD_MASK 511 /* for this to work */ + +#define BD_ENET_RX_INT 0x00800000 +#define BD_ENET_RX_PTP ((ushort)0x0400) +#define BD_ENET_RX_ICE 0x00000020 +#define BD_ENET_RX_PCR 0x00000010 +#define FLAG_RX_CSUM_ENABLED (BD_ENET_RX_ICE | BD_ENET_RX_PCR) +#define FLAG_RX_CSUM_ERROR (BD_ENET_RX_ICE | BD_ENET_RX_PCR) + +/* Interrupt events/masks. */ +#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */ +#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */ +#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */ +#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */ +#define FEC_ENET_TXF_0 ((uint)0x08000000) /* Full frame transmitted */ +#define FEC_ENET_TXF_1 ((uint)0x00000008) /* Full frame transmitted */ +#define FEC_ENET_TXF_2 ((uint)0x00000080) /* Full frame transmitted */ +#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */ +#define FEC_ENET_RXF_0 ((uint)0x02000000) /* Full frame received */ +#define FEC_ENET_RXF_1 ((uint)0x00000002) /* Full frame received */ +#define FEC_ENET_RXF_2 ((uint)0x00000020) /* Full frame received */ +#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */ +#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */ +#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ +#define FEC_ENET_WAKEUP ((uint)0x00020000) /* Wakeup request */ +#define FEC_ENET_TXF (FEC_ENET_TXF_0 | FEC_ENET_TXF_1 | FEC_ENET_TXF_2) +#define FEC_ENET_RXF (FEC_ENET_RXF_0 | FEC_ENET_RXF_1 | FEC_ENET_RXF_2) +#define FEC_ENET_RXF_GET(X) (((X) == 0) ? FEC_ENET_RXF_0 : \ + (((X) == 1) ? FEC_ENET_RXF_1 : \ + FEC_ENET_RXF_2)) +#define FEC_ENET_TS_AVAIL ((uint)0x00010000) +#define FEC_ENET_TS_TIMER ((uint)0x00008000) + +#define FEC_DEFAULT_IMASK (FEC_ENET_TXF | FEC_ENET_RXF) +#define FEC_RX_DISABLED_IMASK (FEC_DEFAULT_IMASK & (~FEC_ENET_RXF)) + +#define FEC_ENET_TXC_DLY ((uint)0x00010000) +#define FEC_ENET_RXC_DLY ((uint)0x00020000) + +/* ENET interrupt coalescing macro define */ +#define FEC_ITR_CLK_SEL (0x1 << 30) +#define FEC_ITR_EN (0x1 << 31) +#define FEC_ITR_ICFT(X) (((X) & 0xff) << 20) +#define FEC_ITR_ICTT(X) ((X) & 0xffff) +#define FEC_ITR_ICFT_DEFAULT 200 /* Set 200 frame count threshold */ +#define FEC_ITR_ICTT_DEFAULT 1000 /* Set 1000us timer threshold */ + +#define FEC_VLAN_TAG_LEN 0x04 +#define FEC_ETHTYPE_LEN 0x02 + +/* Controller is ENET-MAC */ +#define FEC_QUIRK_ENET_MAC (1 << 0) +/* Controller needs driver to swap frame */ +#define FEC_QUIRK_SWAP_FRAME (1 << 1) +/* Controller uses gasket */ +#define FEC_QUIRK_USE_GASKET (1 << 2) +/* Controller has GBIT support */ +#define FEC_QUIRK_HAS_GBIT (1 << 3) +/* Controller has extend desc buffer */ +#define FEC_QUIRK_HAS_BUFDESC_EX (1 << 4) +/* Controller has hardware checksum support */ +#define FEC_QUIRK_HAS_CSUM (1 << 5) +/* Controller has hardware vlan support */ +#define FEC_QUIRK_HAS_VLAN (1 << 6) +/* ENET IP errata ERR006358 + * + * If the ready bit in the transmit buffer descriptor (TxBD[R]) is previously + * detected as not set during a prior frame transmission, then the + * ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs + * were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in + * frames not being transmitted until there is a 0-to-1 transition on + * ENET_TDAR[TDAR]. + */ +#define FEC_QUIRK_ERR006358 (1 << 7) +/* ENET IP hw AVB + * + * i.MX6SX ENET IP add Audio Video Bridging (AVB) feature support. + * - Two class indicators on receive with configurable priority + * - Two class indicators and line speed timer on transmit allowing + * implementation class credit based shapers externally + * - Additional DMA registers provisioned to allow managing up to 3 + * independent rings + */ +#define FEC_QUIRK_HAS_AVB (1 << 8) +/* There is a TDAR race condition for mutliQ when the software sets TDAR + * and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles). + * This will cause the udma_tx and udma_tx_arbiter state machines to hang. + * The issue exist at i.MX6SX enet IP. + */ +#define FEC_QUIRK_ERR007885 (1 << 9) +/* ENET Block Guide/ Chapter for the iMX6SX (PELE) address one issue: + * After set ENET_ATCR[Capture], there need some time cycles before the counter + * value is capture in the register clock domain. + * The wait-time-cycles is at least 6 clock cycles of the slower clock between + * the register clock and the 1588 clock. The 1588 ts_clk is fixed to 25Mhz, + * register clock is 66Mhz, so the wait-time-cycles must be greater than 240ns + * (40ns * 6). + */ +#define FEC_QUIRK_BUG_CAPTURE (1 << 10) +/* Controller has only one MDIO bus */ +#define FEC_QUIRK_SINGLE_MDIO (1 << 11) +/* Controller supports RACC register */ +#define FEC_QUIRK_HAS_RACC (1 << 12) +/* Controller supports interrupt coalesc */ +#define FEC_QUIRK_HAS_COALESCE (1 << 13) +/* Interrupt doesn't wake CPU from deep idle */ +#define FEC_QUIRK_ERR006687 (1 << 14) +/* The MIB counters should be cleared and enabled during + * initialisation. + */ +#define FEC_QUIRK_MIB_CLEAR (1 << 15) +/* Only i.MX25/i.MX27/i.MX28 controller supports FRBR,FRSR registers, + * those FIFO receive registers are resolved in other platforms. + */ +#define FEC_QUIRK_HAS_FRREG (1 << 16) + +/* Some FEC hardware blocks need the MMFR cleared at setup time to avoid + * the generation of an MII event. This must be avoided in the older + * FEC blocks where it will stop MII events being generated. + */ +#define FEC_QUIRK_CLEAR_SETUP_MII (1 << 17) + +/* Some link partners do not tolerate the momentary reset of the REF_CLK + * frequency when the RNCTL register is cleared by hardware reset. + */ +#define FEC_QUIRK_NO_HARD_RESET (1 << 18) + +/* i.MX6SX ENET IP supports multiple queues (3 queues), use this quirk to + * represents this ENET IP. + */ +#define FEC_QUIRK_HAS_MULTI_QUEUES (1 << 19) + +/* i.MX8MQ ENET IP version add new feature to support IEEE 802.3az EEE + * standard. For the transmission, MAC supply two user registers to set + * Sleep (TS) and Wake (TW) time. + */ +#define FEC_QUIRK_HAS_EEE (1 << 20) + +/* i.MX8QM ENET IP version add new feture to generate delayed TXC/RXC + * as an alternative option to make sure it works well with various PHYs. + * For the implementation of delayed clock, ENET takes synchronized 250MHz + * clocks to generate 2ns delay. + */ +#define FEC_QUIRK_DELAYED_CLKS_SUPPORT (1 << 21) + +/* i.MX8MQ SoC integration mix wakeup interrupt signal into "int2" interrupt line. */ +#define FEC_QUIRK_WAKEUP_FROM_INT2 (1 << 22) + +/* i.MX6Q adds pm_qos support */ +#define FEC_QUIRK_HAS_PMQOS BIT(23) + +struct bufdesc_prop { + int qid; + /* Address of Rx and Tx buffers */ + struct bufdesc *base; + struct bufdesc *last; + struct bufdesc *cur; + void __iomem *reg_desc_active; + dma_addr_t dma; + unsigned short ring_size; + unsigned char dsize; + unsigned char dsize_log2; +}; + +struct fec_enet_priv_txrx_info { + int offset; + struct page *page; + struct sk_buff *skb; +}; + +struct fec_enet_priv_tx_q { + struct bufdesc_prop bd; + unsigned char *tx_bounce[TX_RING_SIZE]; + struct sk_buff *tx_skbuff[TX_RING_SIZE]; + + unsigned short tx_stop_threshold; + unsigned short tx_wake_threshold; + + struct bufdesc *dirty_tx; + char *tso_hdrs; + dma_addr_t tso_hdrs_dma; +}; + +struct fec_enet_priv_rx_q { + struct bufdesc_prop bd; + struct fec_enet_priv_txrx_info rx_skb_info[RX_RING_SIZE]; + + /* page_pool */ + struct page_pool *page_pool; + struct xdp_rxq_info xdp_rxq; + + /* rx queue number, in the range 0-7 */ + u8 id; +}; + +struct fec_stop_mode_gpr { + struct regmap *gpr; + u8 reg; + u8 bit; +}; + +/* The FEC buffer descriptors track the ring buffers. The rx_bd_base and + * tx_bd_base always point to the base of the buffer descriptors. The + * cur_rx and cur_tx point to the currently available buffer. + * The dirty_tx tracks the current buffer that is being sent by the + * controller. The cur_tx and dirty_tx are equal under both completely + * empty and completely full conditions. The empty/ready indicator in + * the buffer descriptor determines the actual condition. + */ +struct fec_enet_private { + /* Hardware registers of the FEC device */ + void __iomem *hwp; + + struct net_device *netdev; + + struct clk *clk_ipg; + struct clk *clk_ahb; + struct clk *clk_ref; + struct clk *clk_enet_out; + struct clk *clk_ptp; + struct clk *clk_2x_txclk; + + bool ptp_clk_on; + struct mutex ptp_clk_mutex; + unsigned int num_tx_queues; + unsigned int num_rx_queues; + + /* The saved address of a sent-in-place packet/buffer, for skfree(). */ + struct fec_enet_priv_tx_q *tx_queue[FEC_ENET_MAX_TX_QS]; + struct fec_enet_priv_rx_q *rx_queue[FEC_ENET_MAX_RX_QS]; + + unsigned int total_tx_ring_size; + unsigned int total_rx_ring_size; + + struct platform_device *pdev; + + int dev_id; + + /* Phylib and MDIO interface */ + struct mii_bus *mii_bus; + uint phy_speed; + phy_interface_t phy_interface; + struct device_node *phy_node; + bool rgmii_txc_dly; + bool rgmii_rxc_dly; + bool rpm_active; + int link; + int full_duplex; + int speed; + int irq[FEC_IRQ_NUM]; + bool bufdesc_ex; + int pause_flag; + int wol_flag; + int wake_irq; + u32 quirks; + + struct napi_struct napi; + int csum_flags; + + struct work_struct tx_timeout_work; + + struct ptp_clock *ptp_clock; + struct ptp_clock_info ptp_caps; + unsigned long last_overflow_check; + spinlock_t tmreg_lock; + struct cyclecounter cc; + struct timecounter tc; + int rx_hwtstamp_filter; + u32 base_incval; + u32 cycle_speed; + int hwts_rx_en; + int hwts_tx_en; + struct delayed_work time_keep; + struct regulator *reg_phy; + struct fec_stop_mode_gpr stop_gpr; + struct pm_qos_request pm_qos_req; + + unsigned int tx_align; + unsigned int rx_align; + + /* hw interrupt coalesce */ + unsigned int rx_pkts_itr; + unsigned int rx_time_itr; + unsigned int tx_pkts_itr; + unsigned int tx_time_itr; + unsigned int itr_clk_rate; + + /* tx lpi eee mode */ + struct ethtool_eee eee; + unsigned int clk_ref_rate; + + u32 rx_copybreak; + + /* ptp clock period in ns*/ + unsigned int ptp_inc; + + /* pps */ + int pps_channel; + unsigned int reload_period; + int pps_enable; + unsigned int next_counter; + + struct imx_sc_ipc *ipc_handle; + + u64 ethtool_stats[]; +}; + +void fec_ptp_init(struct platform_device *pdev, int irq_idx); +void fec_ptp_stop(struct platform_device *pdev); +void fec_ptp_start_cyclecounter(struct net_device *ndev); +void fec_ptp_disable_hwts(struct net_device *ndev); +int fec_ptp_set(struct net_device *ndev, struct ifreq *ifr); +int fec_ptp_get(struct net_device *ndev, struct ifreq *ifr); + +/****************************************************************************/ +#endif /* FEC_H */ |