Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 512 insertions, 0 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
new file mode 100644
index 000000000..e888c8a9c
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -0,0 +1,512 @@
+/*
+ * Qualcomm Atheros IPQ806x GMAC glue layer
+ *
+ * Copyright (C) 2015 The Linux Foundation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/of_net.h>
+#include <linux/mfd/syscon.h>
+#include <linux/stmmac.h>
+#include <linux/of_mdio.h>
+#include <linux/module.h>
+#include <linux/sys_soc.h>
+#include <linux/bitfield.h>
+
+#include "stmmac_platform.h"
+
+#define NSS_COMMON_CLK_GATE			0x8
+#define NSS_COMMON_CLK_GATE_PTP_EN(x)		BIT(0x10 + x)
+#define NSS_COMMON_CLK_GATE_RGMII_RX_EN(x)	BIT(0x9 + (x * 2))
+#define NSS_COMMON_CLK_GATE_RGMII_TX_EN(x)	BIT(0x8 + (x * 2))
+#define NSS_COMMON_CLK_GATE_GMII_RX_EN(x)	BIT(0x4 + x)
+#define NSS_COMMON_CLK_GATE_GMII_TX_EN(x)	BIT(0x0 + x)
+
+#define NSS_COMMON_CLK_DIV0			0xC
+#define NSS_COMMON_CLK_DIV_OFFSET(x)		(x * 8)
+#define NSS_COMMON_CLK_DIV_MASK			0x7f
+
+#define NSS_COMMON_CLK_SRC_CTRL			0x14
+#define NSS_COMMON_CLK_SRC_CTRL_OFFSET(x)	(x)
+/* Mode is coded on 1 bit but is different depending on the MAC ID:
+ * MAC0: QSGMII=0 RGMII=1
+ * MAC1: QSGMII=0 SGMII=0 RGMII=1
+ * MAC2 & MAC3: QSGMII=0 SGMII=1
+ */
+#define NSS_COMMON_CLK_SRC_CTRL_RGMII(x)	1
+#define NSS_COMMON_CLK_SRC_CTRL_SGMII(x)	((x >= 2) ? 1 : 0)
+
+#define NSS_COMMON_GMAC_CTL(x)			(0x30 + (x * 4))
+#define NSS_COMMON_GMAC_CTL_CSYS_REQ		BIT(19)
+#define NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL	BIT(16)
+#define NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET	8
+#define NSS_COMMON_GMAC_CTL_IFG_OFFSET		0
+
+#define NSS_COMMON_CLK_DIV_RGMII_1000		1
+#define NSS_COMMON_CLK_DIV_RGMII_100		9
+#define NSS_COMMON_CLK_DIV_RGMII_10		99
+#define NSS_COMMON_CLK_DIV_SGMII_1000		0
+#define NSS_COMMON_CLK_DIV_SGMII_100		4
+#define NSS_COMMON_CLK_DIV_SGMII_10		49
+
+#define QSGMII_PCS_ALL_CH_CTL			0x80
+#define QSGMII_PCS_CH_SPEED_FORCE		BIT(1)
+#define QSGMII_PCS_CH_SPEED_10			0x0
+#define QSGMII_PCS_CH_SPEED_100			BIT(2)
+#define QSGMII_PCS_CH_SPEED_1000		BIT(3)
+#define QSGMII_PCS_CH_SPEED_MASK		(QSGMII_PCS_CH_SPEED_FORCE | \
+						 QSGMII_PCS_CH_SPEED_10 | \
+						 QSGMII_PCS_CH_SPEED_100 | \
+						 QSGMII_PCS_CH_SPEED_1000)
+#define QSGMII_PCS_CH_SPEED_SHIFT(x)		((x) * 4)
+
+#define QSGMII_PCS_CAL_LCKDT_CTL		0x120
+#define QSGMII_PCS_CAL_LCKDT_CTL_RST		BIT(19)
+
+/* Only GMAC1/2/3 support SGMII and their CTL register are not contiguous */
+#define QSGMII_PHY_SGMII_CTL(x)			((x == 1) ? 0x134 : \
+						 (0x13c + (4 * (x - 2))))
+#define QSGMII_PHY_CDR_EN			BIT(0)
+#define QSGMII_PHY_RX_FRONT_EN			BIT(1)
+#define QSGMII_PHY_RX_SIGNAL_DETECT_EN		BIT(2)
+#define QSGMII_PHY_TX_DRIVER_EN			BIT(3)
+#define QSGMII_PHY_QSGMII_EN			BIT(7)
+#define QSGMII_PHY_DEEMPHASIS_LVL_MASK		GENMASK(11, 10)
+#define QSGMII_PHY_DEEMPHASIS_LVL(x)		FIELD_PREP(QSGMII_PHY_DEEMPHASIS_LVL_MASK, (x))
+#define QSGMII_PHY_PHASE_LOOP_GAIN_MASK		GENMASK(14, 12)
+#define QSGMII_PHY_PHASE_LOOP_GAIN(x)		FIELD_PREP(QSGMII_PHY_PHASE_LOOP_GAIN_MASK, (x))
+#define QSGMII_PHY_RX_DC_BIAS_MASK		GENMASK(19, 18)
+#define QSGMII_PHY_RX_DC_BIAS(x)		FIELD_PREP(QSGMII_PHY_RX_DC_BIAS_MASK, (x))
+#define QSGMII_PHY_RX_INPUT_EQU_MASK		GENMASK(21, 20)
+#define QSGMII_PHY_RX_INPUT_EQU(x)		FIELD_PREP(QSGMII_PHY_RX_INPUT_EQU_MASK, (x))
+#define QSGMII_PHY_CDR_PI_SLEW_MASK		GENMASK(23, 22)
+#define QSGMII_PHY_CDR_PI_SLEW(x)		FIELD_PREP(QSGMII_PHY_CDR_PI_SLEW_MASK, (x))
+#define QSGMII_PHY_TX_SLEW_MASK			GENMASK(27, 26)
+#define QSGMII_PHY_TX_SLEW(x)			FIELD_PREP(QSGMII_PHY_TX_SLEW_MASK, (x))
+#define QSGMII_PHY_TX_DRV_AMP_MASK		GENMASK(31, 28)
+#define QSGMII_PHY_TX_DRV_AMP(x)		FIELD_PREP(QSGMII_PHY_TX_DRV_AMP_MASK, (x))
+
+struct ipq806x_gmac {
+	struct platform_device *pdev;
+	struct regmap *nss_common;
+	struct regmap *qsgmii_csr;
+	uint32_t id;
+	struct clk *core_clk;
+	phy_interface_t phy_mode;
+};
+
+static int get_clk_div_sgmii(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+	struct device *dev = &gmac->pdev->dev;
+	int div;
+
+	switch (speed) {
+	case SPEED_1000:
+		div = NSS_COMMON_CLK_DIV_SGMII_1000;
+		break;
+
+	case SPEED_100:
+		div = NSS_COMMON_CLK_DIV_SGMII_100;
+		break;
+
+	case SPEED_10:
+		div = NSS_COMMON_CLK_DIV_SGMII_10;
+		break;
+
+	default:
+		dev_err(dev, "Speed %dMbps not supported in SGMII\n", speed);
+		return -EINVAL;
+	}
+
+	return div;
+}
+
+static int get_clk_div_rgmii(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+	struct device *dev = &gmac->pdev->dev;
+	int div;
+
+	switch (speed) {
+	case SPEED_1000:
+		div = NSS_COMMON_CLK_DIV_RGMII_1000;
+		break;
+
+	case SPEED_100:
+		div = NSS_COMMON_CLK_DIV_RGMII_100;
+		break;
+
+	case SPEED_10:
+		div = NSS_COMMON_CLK_DIV_RGMII_10;
+		break;
+
+	default:
+		dev_err(dev, "Speed %dMbps not supported in RGMII\n", speed);
+		return -EINVAL;
+	}
+
+	return div;
+}
+
+static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed)
+{
+	uint32_t clk_bits, val;
+	int div;
+
+	switch (gmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		div = get_clk_div_rgmii(gmac, speed);
+		clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
+			   NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
+		break;
+
+	case PHY_INTERFACE_MODE_SGMII:
+		div = get_clk_div_sgmii(gmac, speed);
+		clk_bits = NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) |
+			   NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
+		break;
+
+	default:
+		dev_err(&gmac->pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+			phy_modes(gmac->phy_mode));
+		return -EINVAL;
+	}
+
+	/* Disable the clocks */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+	val &= ~clk_bits;
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+	/* Set the divider */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_DIV0, &val);
+	val &= ~(NSS_COMMON_CLK_DIV_MASK
+		 << NSS_COMMON_CLK_DIV_OFFSET(gmac->id));
+	val |= div << NSS_COMMON_CLK_DIV_OFFSET(gmac->id);
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_DIV0, val);
+
+	/* Enable the clock back */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+	val |= clk_bits;
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+	return 0;
+}
+
+static int ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac)
+{
+	struct device *dev = &gmac->pdev->dev;
+	int ret;
+
+	ret = of_get_phy_mode(dev->of_node, &gmac->phy_mode);
+	if (ret) {
+		dev_err(dev, "missing phy mode property\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(dev->of_node, "qcom,id", &gmac->id) < 0) {
+		dev_err(dev, "missing qcom id property\n");
+		return -EINVAL;
+	}
+
+	/* The GMACs are called 1 to 4 in the documentation, but to simplify the
+	 * code and keep it consistent with the Linux convention, we'll number
+	 * them from 0 to 3 here.
+	 */
+	if (gmac->id > 3) {
+		dev_err(dev, "invalid gmac id\n");
+		return -EINVAL;
+	}
+
+	gmac->core_clk = devm_clk_get(dev, "stmmaceth");
+	if (IS_ERR(gmac->core_clk)) {
+		dev_err(dev, "missing stmmaceth clk property\n");
+		return PTR_ERR(gmac->core_clk);
+	}
+	clk_set_rate(gmac->core_clk, 266000000);
+
+	/* Setup the register map for the nss common registers */
+	gmac->nss_common = syscon_regmap_lookup_by_phandle(dev->of_node,
+							   "qcom,nss-common");
+	if (IS_ERR(gmac->nss_common)) {
+		dev_err(dev, "missing nss-common node\n");
+		return PTR_ERR(gmac->nss_common);
+	}
+
+	/* Setup the register map for the qsgmii csr registers */
+	gmac->qsgmii_csr = syscon_regmap_lookup_by_phandle(dev->of_node,
+							   "qcom,qsgmii-csr");
+	if (IS_ERR(gmac->qsgmii_csr))
+		dev_err(dev, "missing qsgmii-csr node\n");
+
+	return PTR_ERR_OR_ZERO(gmac->qsgmii_csr);
+}
+
+static void ipq806x_gmac_fix_mac_speed(void *priv, unsigned int speed)
+{
+	struct ipq806x_gmac *gmac = priv;
+
+	ipq806x_gmac_set_speed(gmac, speed);
+}
+
+static int
+ipq806x_gmac_configure_qsgmii_pcs_speed(struct ipq806x_gmac *gmac)
+{
+	struct platform_device *pdev = gmac->pdev;
+	struct device *dev = &pdev->dev;
+	struct device_node *dn;
+	int link_speed;
+	int val = 0;
+	int ret;
+
+	/* Some bootloader may apply wrong configuration and cause
+	 * not functioning port. If fixed link is not set,
+	 * reset the force speed bit.
+	 */
+	if (!of_phy_is_fixed_link(pdev->dev.of_node))
+		goto write;
+
+	dn = of_get_child_by_name(pdev->dev.of_node, "fixed-link");
+	ret = of_property_read_u32(dn, "speed", &link_speed);
+	of_node_put(dn);
+	if (ret) {
+		dev_err(dev, "found fixed-link node with no speed");
+		return ret;
+	}
+
+	val = QSGMII_PCS_CH_SPEED_FORCE;
+
+	switch (link_speed) {
+	case SPEED_1000:
+		val |= QSGMII_PCS_CH_SPEED_1000;
+		break;
+	case SPEED_100:
+		val |= QSGMII_PCS_CH_SPEED_100;
+		break;
+	case SPEED_10:
+		val |= QSGMII_PCS_CH_SPEED_10;
+		break;
+	}
+
+write:
+	regmap_update_bits(gmac->qsgmii_csr, QSGMII_PCS_ALL_CH_CTL,
+			   QSGMII_PCS_CH_SPEED_MASK <<
+			   QSGMII_PCS_CH_SPEED_SHIFT(gmac->id),
+			   val <<
+			   QSGMII_PCS_CH_SPEED_SHIFT(gmac->id));
+
+	return 0;
+}
+
+static const struct soc_device_attribute ipq806x_gmac_soc_v1[] = {
+	{
+		.revision = "1.*",
+	},
+	{
+		/* sentinel */
+	}
+};
+
+static int
+ipq806x_gmac_configure_qsgmii_params(struct ipq806x_gmac *gmac)
+{
+	struct platform_device *pdev = gmac->pdev;
+	const struct soc_device_attribute *soc;
+	struct device *dev = &pdev->dev;
+	u32 qsgmii_param;
+
+	switch (gmac->id) {
+	case 1:
+		soc = soc_device_match(ipq806x_gmac_soc_v1);
+
+		if (soc)
+			qsgmii_param = QSGMII_PHY_TX_DRV_AMP(0xc) |
+				       QSGMII_PHY_TX_SLEW(0x2) |
+				       QSGMII_PHY_DEEMPHASIS_LVL(0x2);
+		else
+			qsgmii_param = QSGMII_PHY_TX_DRV_AMP(0xd) |
+				       QSGMII_PHY_TX_SLEW(0x0) |
+				       QSGMII_PHY_DEEMPHASIS_LVL(0x0);
+
+		qsgmii_param |= QSGMII_PHY_RX_DC_BIAS(0x2);
+		break;
+	case 2:
+	case 3:
+		qsgmii_param = QSGMII_PHY_RX_DC_BIAS(0x3) |
+			       QSGMII_PHY_TX_DRV_AMP(0xc);
+		break;
+	default: /* gmac 0 can't be set in SGMII mode */
+		dev_err(dev, "gmac id %d can't be in SGMII mode", gmac->id);
+		return -EINVAL;
+	}
+
+	/* Common params across all gmac id */
+	qsgmii_param |= QSGMII_PHY_CDR_EN |
+			QSGMII_PHY_RX_FRONT_EN |
+			QSGMII_PHY_RX_SIGNAL_DETECT_EN |
+			QSGMII_PHY_TX_DRIVER_EN |
+			QSGMII_PHY_QSGMII_EN |
+			QSGMII_PHY_PHASE_LOOP_GAIN(0x4) |
+			QSGMII_PHY_RX_INPUT_EQU(0x1) |
+			QSGMII_PHY_CDR_PI_SLEW(0x2);
+
+	regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id),
+		     qsgmii_param);
+
+	return 0;
+}
+
+static int ipq806x_gmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	struct device *dev = &pdev->dev;
+	struct ipq806x_gmac *gmac;
+	int val;
+	int err;
+
+	val = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (val)
+		return val;
+
+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
+	if (!gmac) {
+		err = -ENOMEM;
+		goto err_remove_config_dt;
+	}
+
+	gmac->pdev = pdev;
+
+	err = ipq806x_gmac_of_parse(gmac);
+	if (err) {
+		dev_err(dev, "device tree parsing error\n");
+		goto err_remove_config_dt;
+	}
+
+	regmap_write(gmac->qsgmii_csr, QSGMII_PCS_CAL_LCKDT_CTL,
+		     QSGMII_PCS_CAL_LCKDT_CTL_RST);
+
+	/* Inter frame gap is set to 12 */
+	val = 12 << NSS_COMMON_GMAC_CTL_IFG_OFFSET |
+	      12 << NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET;
+	/* We also initiate an AXI low power exit request */
+	val |= NSS_COMMON_GMAC_CTL_CSYS_REQ;
+	switch (gmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
+		break;
+	default:
+		goto err_unsupported_phy;
+	}
+	regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val);
+
+	/* Configure the clock src according to the mode */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, &val);
+	val &= ~(1 << NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id));
+	switch (gmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) <<
+			NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		val |= NSS_COMMON_CLK_SRC_CTRL_SGMII(gmac->id) <<
+			NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
+		break;
+	default:
+		goto err_unsupported_phy;
+	}
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val);
+
+	/* Enable PTP clock */
+	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
+	val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
+	switch (gmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		val |= NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
+			NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		val |= NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) |
+				NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
+		break;
+	default:
+		goto err_unsupported_phy;
+	}
+	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
+
+	if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
+		err = ipq806x_gmac_configure_qsgmii_params(gmac);
+		if (err)
+			goto err_remove_config_dt;
+
+		err = ipq806x_gmac_configure_qsgmii_pcs_speed(gmac);
+		if (err)
+			goto err_remove_config_dt;
+	}
+
+	plat_dat->has_gmac = true;
+	plat_dat->bsp_priv = gmac;
+	plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed;
+	plat_dat->multicast_filter_bins = 0;
+	plat_dat->tx_fifo_size = 8192;
+	plat_dat->rx_fifo_size = 8192;
+
+	err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	if (err)
+		goto err_remove_config_dt;
+
+	return 0;
+
+err_unsupported_phy:
+	dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
+		phy_modes(gmac->phy_mode));
+	err = -EINVAL;
+
+err_remove_config_dt:
+	stmmac_remove_config_dt(pdev, plat_dat);
+
+	return err;
+}
+
+static const struct of_device_id ipq806x_gmac_dwmac_match[] = {
+	{ .compatible = "qcom,ipq806x-gmac" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ipq806x_gmac_dwmac_match);
+
+static struct platform_driver ipq806x_gmac_dwmac_driver = {
+	.probe = ipq806x_gmac_probe,
+	.remove = stmmac_pltfr_remove,
+	.driver = {
+		.name		= "ipq806x-gmac-dwmac",
+		.pm		= &stmmac_pltfr_pm_ops,
+		.of_match_table	= ipq806x_gmac_dwmac_match,
+	},
+};
+module_platform_driver(ipq806x_gmac_dwmac_driver);
+
+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
+MODULE_DESCRIPTION("Qualcomm Atheros IPQ806x DWMAC specific glue layer");
+MODULE_LICENSE("Dual BSD/GPL");