Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

15 files changed, 13547 insertions, 0 deletions

diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig
new file mode 100644
index 000000000..95da876c5
--- /dev/null
+++ b/drivers/net/ieee802154/Kconfig
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig IEEE802154_DRIVERS
+	tristate "IEEE 802.15.4 drivers"
+	depends on NETDEVICES && IEEE802154
+	default y
+	help
+	  Say Y here to get to see options for IEEE 802.15.4 Low-Rate
+	  Wireless Personal Area Network device drivers. This option alone
+	  does not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and
+	  disabled.
+
+config IEEE802154_FAKELB
+	depends on IEEE802154_DRIVERS && MAC802154
+	tristate "IEEE 802.15.4 loopback driver"
+	help
+	  Say Y here to enable the fake driver that can emulate a net
+	  of several interconnected radio devices.
+
+	  This driver can also be built as a module. To do so say M here.
+	  The module will be called 'fakelb'.
+
+config IEEE802154_AT86RF230
+	depends on IEEE802154_DRIVERS && MAC802154
+	tristate "AT86RF230/231/233/212 transceiver driver"
+	depends on SPI
+	select REGMAP_SPI
+	help
+	  Say Y here to enable the at86rf230/231/233/212 SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'at86rf230'.
+
+config IEEE802154_MRF24J40
+	tristate "Microchip MRF24J40 transceiver driver"
+	depends on IEEE802154_DRIVERS && MAC802154
+	depends on SPI
+	select REGMAP_SPI
+	help
+	  Say Y here to enable the MRF24J20 SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'mrf24j40'.
+
+config IEEE802154_CC2520
+	depends on IEEE802154_DRIVERS && MAC802154
+	tristate "CC2520 transceiver driver"
+	depends on SPI
+	help
+	  Say Y here to enable the CC2520 SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'cc2520'.
+
+config IEEE802154_ATUSB
+	tristate "ATUSB transceiver driver"
+	depends on IEEE802154_DRIVERS && MAC802154 && USB
+	help
+	  Say Y here to enable the ATUSB IEEE 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so say M here.
+	  The module will be called 'atusb'.
+
+config IEEE802154_ADF7242
+	tristate "ADF7242 transceiver driver"
+	depends on IEEE802154_DRIVERS && MAC802154
+	depends on SPI
+	help
+	  Say Y here to enable the ADF7242 SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'adf7242'.
+
+config IEEE802154_CA8210
+	tristate "Cascoda CA8210 transceiver driver"
+	depends on IEEE802154_DRIVERS && MAC802154
+	depends on COMMON_CLK
+	depends on SPI
+	help
+	  Say Y here to enable the CA8210 SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'ca8210'.
+
+config IEEE802154_CA8210_DEBUGFS
+	bool "CA8210 debugfs interface"
+	depends on IEEE802154_CA8210
+	depends on DEBUG_FS
+	help
+	  This option compiles debugfs code for the ca8210 driver. This
+	  exposes a debugfs node for each CA8210 instance which allows
+	  direct use of the Cascoda API, exposing the 802.15.4 MAC
+	  management entities.
+
+config IEEE802154_MCR20A
+	tristate "MCR20A transceiver driver"
+	depends on IEEE802154_DRIVERS && MAC802154
+	depends on SPI
+	help
+	  Say Y here to enable the MCR20A SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'mcr20a'.
+
+config IEEE802154_HWSIM
+	depends on IEEE802154_DRIVERS && MAC802154
+	tristate "Simulated radio testing tool for mac802154"
+	help
+	  This driver is a developer testing tool that can be used to test
+	  IEEE 802.15.4 networking stack (mac802154) functionality. This is not
+	  needed for normal wpan usage and is only for testing.
+
+	  This driver can also be built as a module. To do so say M here.
+	  The module will be called 'mac802154_hwsim'.
diff --git a/drivers/net/ieee802154/Makefile b/drivers/net/ieee802154/Makefile
new file mode 100644
index 000000000..0c78b6298
--- /dev/null
+++ b/drivers/net/ieee802154/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_IEEE802154_FAKELB) += fakelb.o
+obj-$(CONFIG_IEEE802154_AT86RF230) += at86rf230.o
+obj-$(CONFIG_IEEE802154_MRF24J40) += mrf24j40.o
+obj-$(CONFIG_IEEE802154_CC2520) += cc2520.o
+obj-$(CONFIG_IEEE802154_ATUSB) += atusb.o
+obj-$(CONFIG_IEEE802154_ADF7242) += adf7242.o
+obj-$(CONFIG_IEEE802154_CA8210) += ca8210.o
+obj-$(CONFIG_IEEE802154_MCR20A) += mcr20a.o
+obj-$(CONFIG_IEEE802154_HWSIM) += mac802154_hwsim.o
diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c
new file mode 100644
index 000000000..32d92bdab
--- /dev/null
+++ b/drivers/net/ieee802154/adf7242.c
@@ -0,0 +1,1352 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Analog Devices ADF7242 Low-Power IEEE 802.15.4 Transceiver
+ *
+ * Copyright 2009-2017 Analog Devices Inc.
+ *
+ * https://www.analog.com/ADF7242
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/firmware.h>
+#include <linux/spi/spi.h>
+#include <linux/skbuff.h>
+#include <linux/of.h>
+#include <linux/irq.h>
+#include <linux/debugfs.h>
+#include <linux/bitops.h>
+#include <linux/ieee802154.h>
+#include <net/mac802154.h>
+#include <net/cfg802154.h>
+
+#define FIRMWARE "adf7242_firmware.bin"
+#define MAX_POLL_LOOPS 200
+
+/* All Registers */
+
+#define REG_EXT_CTRL	0x100	/* RW External LNA/PA and internal PA control */
+#define REG_TX_FSK_TEST 0x101	/* RW TX FSK test mode configuration */
+#define REG_CCA1	0x105	/* RW RSSI threshold for CCA */
+#define REG_CCA2	0x106	/* RW CCA mode configuration */
+#define REG_BUFFERCFG	0x107	/* RW RX_BUFFER overwrite control */
+#define REG_PKT_CFG	0x108	/* RW FCS evaluation configuration */
+#define REG_DELAYCFG0	0x109	/* RW RC_RX command to SFD or sync word delay */
+#define REG_DELAYCFG1	0x10A	/* RW RC_TX command to TX state */
+#define REG_DELAYCFG2	0x10B	/* RW Mac delay extension */
+#define REG_SYNC_WORD0	0x10C	/* RW sync word bits [7:0] of [23:0]  */
+#define REG_SYNC_WORD1	0x10D	/* RW sync word bits [15:8] of [23:0]  */
+#define REG_SYNC_WORD2	0x10E	/* RW sync word bits [23:16] of [23:0]	*/
+#define REG_SYNC_CONFIG	0x10F	/* RW sync word configuration */
+#define REG_RC_CFG	0x13E	/* RW RX / TX packet configuration */
+#define REG_RC_VAR44	0x13F	/* RW RESERVED */
+#define REG_CH_FREQ0	0x300	/* RW Channel Frequency Settings - Low */
+#define REG_CH_FREQ1	0x301	/* RW Channel Frequency Settings - Middle */
+#define REG_CH_FREQ2	0x302	/* RW Channel Frequency Settings - High */
+#define REG_TX_FD	0x304	/* RW TX Frequency Deviation Register */
+#define REG_DM_CFG0	0x305	/* RW RX Discriminator BW Register */
+#define REG_TX_M	0x306	/* RW TX Mode Register */
+#define REG_RX_M	0x307	/* RW RX Mode Register */
+#define REG_RRB		0x30C	/* R RSSI Readback Register */
+#define REG_LRB		0x30D	/* R Link Quality Readback Register */
+#define REG_DR0		0x30E	/* RW bits [15:8] of [15:0] data rate setting */
+#define REG_DR1		0x30F	/* RW bits [7:0] of [15:0] data rate setting */
+#define REG_PRAMPG	0x313	/* RW RESERVED */
+#define REG_TXPB	0x314	/* RW TX Packet Storage Base Address */
+#define REG_RXPB	0x315	/* RW RX Packet Storage Base Address */
+#define REG_TMR_CFG0	0x316	/* RW Wake up Timer Conf Register - High */
+#define REG_TMR_CFG1	0x317	/* RW Wake up Timer Conf Register - Low */
+#define REG_TMR_RLD0	0x318	/* RW Wake up Timer Value Register - High */
+#define REG_TMR_RLD1	0x319	/* RW Wake up Timer Value Register - Low  */
+#define REG_TMR_CTRL	0x31A	/* RW Wake up Timer Timeout flag */
+#define REG_PD_AUX	0x31E	/* RW Battmon enable */
+#define REG_GP_CFG	0x32C	/* RW GPIO Configuration */
+#define REG_GP_OUT	0x32D	/* RW GPIO Configuration */
+#define REG_GP_IN	0x32E	/* R GPIO Configuration */
+#define REG_SYNT	0x335	/* RW bandwidth calibration timers */
+#define REG_CAL_CFG	0x33D	/* RW Calibration Settings */
+#define REG_PA_BIAS	0x36E	/* RW PA BIAS */
+#define REG_SYNT_CAL	0x371	/* RW Oscillator and Doubler Configuration */
+#define REG_IIRF_CFG	0x389	/* RW BB Filter Decimation Rate */
+#define REG_CDR_CFG	0x38A	/* RW CDR kVCO */
+#define REG_DM_CFG1	0x38B	/* RW Postdemodulator Filter */
+#define REG_AGCSTAT	0x38E	/* R RXBB Ref Osc Calibration Engine Readback */
+#define REG_RXCAL0	0x395	/* RW RX BB filter tuning, LSB */
+#define REG_RXCAL1	0x396	/* RW RX BB filter tuning, MSB */
+#define REG_RXFE_CFG	0x39B	/* RW RXBB Ref Osc & RXFE Calibration */
+#define REG_PA_RR	0x3A7	/* RW Set PA ramp rate */
+#define REG_PA_CFG	0x3A8	/* RW PA enable */
+#define REG_EXTPA_CFG	0x3A9	/* RW External PA BIAS DAC */
+#define REG_EXTPA_MSC	0x3AA	/* RW PA Bias Mode */
+#define REG_ADC_RBK	0x3AE	/* R Readback temp */
+#define REG_AGC_CFG1	0x3B2	/* RW GC Parameters */
+#define REG_AGC_MAX	0x3B4	/* RW Slew rate	 */
+#define REG_AGC_CFG2	0x3B6	/* RW RSSI Parameters */
+#define REG_AGC_CFG3	0x3B7	/* RW RSSI Parameters */
+#define REG_AGC_CFG4	0x3B8	/* RW RSSI Parameters */
+#define REG_AGC_CFG5	0x3B9	/* RW RSSI & NDEC Parameters */
+#define REG_AGC_CFG6	0x3BA	/* RW NDEC Parameters */
+#define REG_OCL_CFG1	0x3C4	/* RW OCL System Parameters */
+#define REG_IRQ1_EN0	0x3C7	/* RW Interrupt Mask set bits for IRQ1 */
+#define REG_IRQ1_EN1	0x3C8	/* RW Interrupt Mask set bits for IRQ1 */
+#define REG_IRQ2_EN0	0x3C9	/* RW Interrupt Mask set bits for IRQ2 */
+#define REG_IRQ2_EN1	0x3CA	/* RW Interrupt Mask set bits for IRQ2 */
+#define REG_IRQ1_SRC0	0x3CB	/* RW Interrupt Source bits for IRQ */
+#define REG_IRQ1_SRC1	0x3CC	/* RW Interrupt Source bits for IRQ */
+#define REG_OCL_BW0	0x3D2	/* RW OCL System Parameters */
+#define REG_OCL_BW1	0x3D3	/* RW OCL System Parameters */
+#define REG_OCL_BW2	0x3D4	/* RW OCL System Parameters */
+#define REG_OCL_BW3	0x3D5	/* RW OCL System Parameters */
+#define REG_OCL_BW4	0x3D6	/* RW OCL System Parameters */
+#define REG_OCL_BWS	0x3D7	/* RW OCL System Parameters */
+#define REG_OCL_CFG13	0x3E0	/* RW OCL System Parameters */
+#define REG_GP_DRV	0x3E3	/* RW I/O pads Configuration and bg trim */
+#define REG_BM_CFG	0x3E6	/* RW Batt. Monitor Threshold Voltage setting */
+#define REG_SFD_15_4	0x3F4	/* RW Option to set non standard SFD */
+#define REG_AFC_CFG	0x3F7	/* RW AFC mode and polarity */
+#define REG_AFC_KI_KP	0x3F8	/* RW AFC ki and kp */
+#define REG_AFC_RANGE	0x3F9	/* RW AFC range */
+#define REG_AFC_READ	0x3FA	/* RW Readback frequency error */
+
+/* REG_EXTPA_MSC */
+#define PA_PWR(x)		(((x) & 0xF) << 4)
+#define EXTPA_BIAS_SRC		BIT(3)
+#define EXTPA_BIAS_MODE(x)	(((x) & 0x7) << 0)
+
+/* REG_PA_CFG */
+#define PA_BRIDGE_DBIAS(x)	(((x) & 0x1F) << 0)
+#define PA_DBIAS_HIGH_POWER	21
+#define PA_DBIAS_LOW_POWER	13
+
+/* REG_PA_BIAS */
+#define PA_BIAS_CTRL(x)		(((x) & 0x1F) << 1)
+#define REG_PA_BIAS_DFL		BIT(0)
+#define PA_BIAS_HIGH_POWER	63
+#define PA_BIAS_LOW_POWER	55
+
+#define REG_PAN_ID0		0x112
+#define REG_PAN_ID1		0x113
+#define REG_SHORT_ADDR_0	0x114
+#define REG_SHORT_ADDR_1	0x115
+#define REG_IEEE_ADDR_0		0x116
+#define REG_IEEE_ADDR_1		0x117
+#define REG_IEEE_ADDR_2		0x118
+#define REG_IEEE_ADDR_3		0x119
+#define REG_IEEE_ADDR_4		0x11A
+#define REG_IEEE_ADDR_5		0x11B
+#define REG_IEEE_ADDR_6		0x11C
+#define REG_IEEE_ADDR_7		0x11D
+#define REG_FFILT_CFG		0x11E
+#define REG_AUTO_CFG		0x11F
+#define REG_AUTO_TX1		0x120
+#define REG_AUTO_TX2		0x121
+#define REG_AUTO_STATUS		0x122
+
+/* REG_FFILT_CFG */
+#define ACCEPT_BEACON_FRAMES   BIT(0)
+#define ACCEPT_DATA_FRAMES     BIT(1)
+#define ACCEPT_ACK_FRAMES      BIT(2)
+#define ACCEPT_MACCMD_FRAMES   BIT(3)
+#define ACCEPT_RESERVED_FRAMES BIT(4)
+#define ACCEPT_ALL_ADDRESS     BIT(5)
+
+/* REG_AUTO_CFG */
+#define AUTO_ACK_FRAMEPEND     BIT(0)
+#define IS_PANCOORD	       BIT(1)
+#define RX_AUTO_ACK_EN	       BIT(3)
+#define CSMA_CA_RX_TURNAROUND  BIT(4)
+
+/* REG_AUTO_TX1 */
+#define MAX_FRAME_RETRIES(x)   ((x) & 0xF)
+#define MAX_CCA_RETRIES(x)     (((x) & 0x7) << 4)
+
+/* REG_AUTO_TX2 */
+#define CSMA_MAX_BE(x)	       ((x) & 0xF)
+#define CSMA_MIN_BE(x)	       (((x) & 0xF) << 4)
+
+#define CMD_SPI_NOP		0xFF /* No operation. Use for dummy writes */
+#define CMD_SPI_PKT_WR		0x10 /* Write telegram to the Packet RAM
+				      * starting from the TX packet base address
+				      * pointer tx_packet_base
+				      */
+#define CMD_SPI_PKT_RD		0x30 /* Read telegram from the Packet RAM
+				      * starting from RX packet base address
+				      * pointer rxpb.rx_packet_base
+				      */
+#define CMD_SPI_MEM_WR(x)	(0x18 + (x >> 8)) /* Write data to MCR or
+						   * Packet RAM sequentially
+						   */
+#define CMD_SPI_MEM_RD(x)	(0x38 + (x >> 8)) /* Read data from MCR or
+						   * Packet RAM sequentially
+						   */
+#define CMD_SPI_MEMR_WR(x)	(0x08 + (x >> 8)) /* Write data to MCR or Packet
+						   * RAM as random block
+						   */
+#define CMD_SPI_MEMR_RD(x)	(0x28 + (x >> 8)) /* Read data from MCR or
+						   * Packet RAM random block
+						   */
+#define CMD_SPI_PRAM_WR		0x1E /* Write data sequentially to current
+				      * PRAM page selected
+				      */
+#define CMD_SPI_PRAM_RD		0x3E /* Read data sequentially from current
+				      * PRAM page selected
+				      */
+#define CMD_RC_SLEEP		0xB1 /* Invoke transition of radio controller
+				      * into SLEEP state
+				      */
+#define CMD_RC_IDLE		0xB2 /* Invoke transition of radio controller
+				      * into IDLE state
+				      */
+#define CMD_RC_PHY_RDY		0xB3 /* Invoke transition of radio controller
+				      * into PHY_RDY state
+				      */
+#define CMD_RC_RX		0xB4 /* Invoke transition of radio controller
+				      * into RX state
+				      */
+#define CMD_RC_TX		0xB5 /* Invoke transition of radio controller
+				      * into TX state
+				      */
+#define CMD_RC_MEAS		0xB6 /* Invoke transition of radio controller
+				      * into MEAS state
+				      */
+#define CMD_RC_CCA		0xB7 /* Invoke Clear channel assessment */
+#define CMD_RC_CSMACA		0xC1 /* initiates CSMA-CA channel access
+				      * sequence and frame transmission
+				      */
+#define CMD_RC_PC_RESET		0xC7 /* Program counter reset */
+#define CMD_RC_RESET		0xC8 /* Resets the ADF7242 and puts it in
+				      * the sleep state
+				      */
+#define CMD_RC_PC_RESET_NO_WAIT (CMD_RC_PC_RESET | BIT(31))
+
+/* STATUS */
+
+#define STAT_SPI_READY		BIT(7)
+#define STAT_IRQ_STATUS		BIT(6)
+#define STAT_RC_READY		BIT(5)
+#define STAT_CCA_RESULT		BIT(4)
+#define RC_STATUS_IDLE		1
+#define RC_STATUS_MEAS		2
+#define RC_STATUS_PHY_RDY	3
+#define RC_STATUS_RX		4
+#define RC_STATUS_TX		5
+#define RC_STATUS_MASK		0xF
+
+/* AUTO_STATUS */
+
+#define SUCCESS			0
+#define SUCCESS_DATPEND		1
+#define FAILURE_CSMACA		2
+#define FAILURE_NOACK		3
+#define AUTO_STATUS_MASK	0x3
+
+#define PRAM_PAGESIZE		256
+
+/* IRQ1 */
+
+#define IRQ_CCA_COMPLETE	BIT(0)
+#define IRQ_SFD_RX		BIT(1)
+#define IRQ_SFD_TX		BIT(2)
+#define IRQ_RX_PKT_RCVD		BIT(3)
+#define IRQ_TX_PKT_SENT		BIT(4)
+#define IRQ_FRAME_VALID		BIT(5)
+#define IRQ_ADDRESS_VALID	BIT(6)
+#define IRQ_CSMA_CA		BIT(7)
+
+#define AUTO_TX_TURNAROUND	BIT(3)
+#define ADDON_EN		BIT(4)
+
+#define FLAG_XMIT		0
+#define FLAG_START		1
+
+#define ADF7242_REPORT_CSMA_CA_STAT 0 /* framework doesn't handle yet */
+
+struct adf7242_local {
+	struct spi_device *spi;
+	struct completion tx_complete;
+	struct ieee802154_hw *hw;
+	struct mutex bmux; /* protect SPI messages */
+	struct spi_message stat_msg;
+	struct spi_transfer stat_xfer;
+	struct dentry *debugfs_root;
+	struct delayed_work work;
+	struct workqueue_struct *wqueue;
+	unsigned long flags;
+	int tx_stat;
+	bool promiscuous;
+	s8 rssi;
+	u8 max_frame_retries;
+	u8 max_cca_retries;
+	u8 max_be;
+	u8 min_be;
+
+	/* DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+
+	u8 buf[3] ____cacheline_aligned;
+	u8 buf_reg_tx[3];
+	u8 buf_read_tx[4];
+	u8 buf_read_rx[4];
+	u8 buf_stat_rx;
+	u8 buf_stat_tx;
+	u8 buf_cmd;
+};
+
+static int adf7242_soft_reset(struct adf7242_local *lp, int line);
+
+static int adf7242_status(struct adf7242_local *lp, u8 *stat)
+{
+	int status;
+
+	mutex_lock(&lp->bmux);
+	status = spi_sync(lp->spi, &lp->stat_msg);
+	*stat = lp->buf_stat_rx;
+	mutex_unlock(&lp->bmux);
+
+	return status;
+}
+
+static int adf7242_wait_status(struct adf7242_local *lp, unsigned int status,
+			       unsigned int mask, int line)
+{
+	int cnt = 0, ret = 0;
+	u8 stat;
+
+	do {
+		adf7242_status(lp, &stat);
+		cnt++;
+	} while (((stat & mask) != status) && (cnt < MAX_POLL_LOOPS));
+
+	if (cnt >= MAX_POLL_LOOPS) {
+		ret = -ETIMEDOUT;
+
+		if (!(stat & STAT_RC_READY)) {
+			adf7242_soft_reset(lp, line);
+			adf7242_status(lp, &stat);
+
+			if ((stat & mask) == status)
+				ret = 0;
+		}
+
+		if (ret < 0)
+			dev_warn(&lp->spi->dev,
+				 "%s:line %d Timeout status 0x%x (%d)\n",
+				 __func__, line, stat, cnt);
+	}
+
+	dev_vdbg(&lp->spi->dev, "%s : loops=%d line %d\n", __func__, cnt, line);
+
+	return ret;
+}
+
+static int adf7242_wait_rc_ready(struct adf7242_local *lp, int line)
+{
+	return adf7242_wait_status(lp, STAT_RC_READY | STAT_SPI_READY,
+				   STAT_RC_READY | STAT_SPI_READY, line);
+}
+
+static int adf7242_wait_spi_ready(struct adf7242_local *lp, int line)
+{
+	return adf7242_wait_status(lp, STAT_SPI_READY,
+				   STAT_SPI_READY, line);
+}
+
+static int adf7242_write_fbuf(struct adf7242_local *lp, u8 *data, u8 len)
+{
+	u8 *buf = lp->buf;
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer_head = {
+		.len = 2,
+		.tx_buf = buf,
+
+	};
+	struct spi_transfer xfer_buf = {
+		.len = len,
+		.tx_buf = data,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer_head, &msg);
+	spi_message_add_tail(&xfer_buf, &msg);
+
+	adf7242_wait_spi_ready(lp, __LINE__);
+
+	mutex_lock(&lp->bmux);
+	buf[0] = CMD_SPI_PKT_WR;
+	buf[1] = len + 2;
+
+	status = spi_sync(lp->spi, &msg);
+	mutex_unlock(&lp->bmux);
+
+	return status;
+}
+
+static int adf7242_read_fbuf(struct adf7242_local *lp,
+			     u8 *data, size_t len, bool packet_read)
+{
+	u8 *buf = lp->buf;
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer_head = {
+		.len = 3,
+		.tx_buf = buf,
+		.rx_buf = buf,
+	};
+	struct spi_transfer xfer_buf = {
+		.len = len,
+		.rx_buf = data,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer_head, &msg);
+	spi_message_add_tail(&xfer_buf, &msg);
+
+	adf7242_wait_spi_ready(lp, __LINE__);
+
+	mutex_lock(&lp->bmux);
+	if (packet_read) {
+		buf[0] = CMD_SPI_PKT_RD;
+		buf[1] = CMD_SPI_NOP;
+		buf[2] = 0;	/* PHR */
+	} else {
+		buf[0] = CMD_SPI_PRAM_RD;
+		buf[1] = 0;
+		buf[2] = CMD_SPI_NOP;
+	}
+
+	status = spi_sync(lp->spi, &msg);
+
+	mutex_unlock(&lp->bmux);
+
+	return status;
+}
+
+static int adf7242_read_reg(struct adf7242_local *lp, u16 addr, u8 *data)
+{
+	int status;
+	struct spi_message msg;
+
+	struct spi_transfer xfer = {
+		.len = 4,
+		.tx_buf = lp->buf_read_tx,
+		.rx_buf = lp->buf_read_rx,
+	};
+
+	adf7242_wait_spi_ready(lp, __LINE__);
+
+	mutex_lock(&lp->bmux);
+	lp->buf_read_tx[0] = CMD_SPI_MEM_RD(addr);
+	lp->buf_read_tx[1] = addr;
+	lp->buf_read_tx[2] = CMD_SPI_NOP;
+	lp->buf_read_tx[3] = CMD_SPI_NOP;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	status = spi_sync(lp->spi, &msg);
+	if (msg.status)
+		status = msg.status;
+
+	if (!status)
+		*data = lp->buf_read_rx[3];
+
+	mutex_unlock(&lp->bmux);
+
+	dev_vdbg(&lp->spi->dev, "%s : REG 0x%X, VAL 0x%X\n", __func__,
+		 addr, *data);
+
+	return status;
+}
+
+static int adf7242_write_reg(struct adf7242_local *lp, u16 addr, u8 data)
+{
+	int status;
+
+	adf7242_wait_spi_ready(lp, __LINE__);
+
+	mutex_lock(&lp->bmux);
+	lp->buf_reg_tx[0] = CMD_SPI_MEM_WR(addr);
+	lp->buf_reg_tx[1] = addr;
+	lp->buf_reg_tx[2] = data;
+	status = spi_write(lp->spi, lp->buf_reg_tx, 3);
+	mutex_unlock(&lp->bmux);
+
+	dev_vdbg(&lp->spi->dev, "%s : REG 0x%X, VAL 0x%X\n",
+		 __func__, addr, data);
+
+	return status;
+}
+
+static int adf7242_cmd(struct adf7242_local *lp, unsigned int cmd)
+{
+	int status;
+
+	dev_vdbg(&lp->spi->dev, "%s : CMD=0x%X\n", __func__, cmd);
+
+	if (cmd != CMD_RC_PC_RESET_NO_WAIT)
+		adf7242_wait_rc_ready(lp, __LINE__);
+
+	mutex_lock(&lp->bmux);
+	lp->buf_cmd = cmd;
+	status = spi_write(lp->spi, &lp->buf_cmd, 1);
+	mutex_unlock(&lp->bmux);
+
+	return status;
+}
+
+static int adf7242_upload_firmware(struct adf7242_local *lp, u8 *data, u16 len)
+{
+	struct spi_message msg;
+	struct spi_transfer xfer_buf = { };
+	int status, i, page = 0;
+	u8 *buf = lp->buf;
+
+	struct spi_transfer xfer_head = {
+		.len = 2,
+		.tx_buf = buf,
+	};
+
+	buf[0] = CMD_SPI_PRAM_WR;
+	buf[1] = 0;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer_head, &msg);
+	spi_message_add_tail(&xfer_buf, &msg);
+
+	for (i = len; i >= 0; i -= PRAM_PAGESIZE) {
+		adf7242_write_reg(lp, REG_PRAMPG, page);
+
+		xfer_buf.len = (i >= PRAM_PAGESIZE) ? PRAM_PAGESIZE : i;
+		xfer_buf.tx_buf = &data[page * PRAM_PAGESIZE];
+
+		mutex_lock(&lp->bmux);
+		status = spi_sync(lp->spi, &msg);
+		mutex_unlock(&lp->bmux);
+		page++;
+	}
+
+	return status;
+}
+
+static int adf7242_verify_firmware(struct adf7242_local *lp,
+				   const u8 *data, size_t len)
+{
+#ifdef DEBUG
+	int i, j;
+	unsigned int page;
+	u8 *buf = kmalloc(PRAM_PAGESIZE, GFP_KERNEL);
+
+	if (!buf)
+		return -ENOMEM;
+
+	for (page = 0, i = len; i >= 0; i -= PRAM_PAGESIZE, page++) {
+		size_t nb = (i >= PRAM_PAGESIZE) ? PRAM_PAGESIZE : i;
+
+		adf7242_write_reg(lp, REG_PRAMPG, page);
+		adf7242_read_fbuf(lp, buf, nb, false);
+
+		for (j = 0; j < nb; j++) {
+			if (buf[j] != data[page * PRAM_PAGESIZE + j]) {
+				kfree(buf);
+				return -EIO;
+			}
+		}
+	}
+	kfree(buf);
+#endif
+	return 0;
+}
+
+static void adf7242_clear_irqstat(struct adf7242_local *lp)
+{
+	adf7242_write_reg(lp, REG_IRQ1_SRC1, IRQ_CCA_COMPLETE | IRQ_SFD_RX |
+			  IRQ_SFD_TX | IRQ_RX_PKT_RCVD | IRQ_TX_PKT_SENT |
+			  IRQ_FRAME_VALID | IRQ_ADDRESS_VALID | IRQ_CSMA_CA);
+}
+
+static int adf7242_cmd_rx(struct adf7242_local *lp)
+{
+	/* Wait until the ACK is sent */
+	adf7242_wait_status(lp, RC_STATUS_PHY_RDY, RC_STATUS_MASK, __LINE__);
+	adf7242_clear_irqstat(lp);
+	mod_delayed_work(lp->wqueue, &lp->work, msecs_to_jiffies(400));
+
+	return adf7242_cmd(lp, CMD_RC_RX);
+}
+
+static void adf7242_rx_cal_work(struct work_struct *work)
+{
+	struct adf7242_local *lp =
+	container_of(work, struct adf7242_local, work.work);
+
+	/* Reissuing RC_RX every 400ms - to adjust for offset
+	 * drift in receiver (datasheet page 61, OCL section)
+	 */
+
+	if (!test_bit(FLAG_XMIT, &lp->flags)) {
+		adf7242_cmd(lp, CMD_RC_PHY_RDY);
+		adf7242_cmd_rx(lp);
+	}
+}
+
+static int adf7242_set_txpower(struct ieee802154_hw *hw, int mbm)
+{
+	struct adf7242_local *lp = hw->priv;
+	u8 pwr, bias_ctrl, dbias, tmp;
+	int db = mbm / 100;
+
+	dev_vdbg(&lp->spi->dev, "%s : Power %d dB\n", __func__, db);
+
+	if (db > 5 || db < -26)
+		return -EINVAL;
+
+	db = DIV_ROUND_CLOSEST(db + 29, 2);
+
+	if (db > 15) {
+		dbias = PA_DBIAS_HIGH_POWER;
+		bias_ctrl = PA_BIAS_HIGH_POWER;
+	} else {
+		dbias = PA_DBIAS_LOW_POWER;
+		bias_ctrl = PA_BIAS_LOW_POWER;
+	}
+
+	pwr = clamp_t(u8, db, 3, 15);
+
+	adf7242_read_reg(lp, REG_PA_CFG, &tmp);
+	tmp &= ~PA_BRIDGE_DBIAS(~0);
+	tmp |= PA_BRIDGE_DBIAS(dbias);
+	adf7242_write_reg(lp, REG_PA_CFG, tmp);
+
+	adf7242_read_reg(lp, REG_PA_BIAS, &tmp);
+	tmp &= ~PA_BIAS_CTRL(~0);
+	tmp |= PA_BIAS_CTRL(bias_ctrl);
+	adf7242_write_reg(lp, REG_PA_BIAS, tmp);
+
+	adf7242_read_reg(lp, REG_EXTPA_MSC, &tmp);
+	tmp &= ~PA_PWR(~0);
+	tmp |= PA_PWR(pwr);
+
+	return adf7242_write_reg(lp, REG_EXTPA_MSC, tmp);
+}
+
+static int adf7242_set_csma_params(struct ieee802154_hw *hw, u8 min_be,
+				   u8 max_be, u8 retries)
+{
+	struct adf7242_local *lp = hw->priv;
+	int ret;
+
+	dev_vdbg(&lp->spi->dev, "%s : min_be=%d max_be=%d retries=%d\n",
+		 __func__, min_be, max_be, retries);
+
+	if (min_be > max_be || max_be > 8 || retries > 5)
+		return -EINVAL;
+
+	ret = adf7242_write_reg(lp, REG_AUTO_TX1,
+				MAX_FRAME_RETRIES(lp->max_frame_retries) |
+				MAX_CCA_RETRIES(retries));
+	if (ret)
+		return ret;
+
+	lp->max_cca_retries = retries;
+	lp->max_be = max_be;
+	lp->min_be = min_be;
+
+	return adf7242_write_reg(lp, REG_AUTO_TX2, CSMA_MAX_BE(max_be) |
+			CSMA_MIN_BE(min_be));
+}
+
+static int adf7242_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
+{
+	struct adf7242_local *lp = hw->priv;
+	int ret = 0;
+
+	dev_vdbg(&lp->spi->dev, "%s : Retries = %d\n", __func__, retries);
+
+	if (retries < -1 || retries > 15)
+		return -EINVAL;
+
+	if (retries >= 0)
+		ret = adf7242_write_reg(lp, REG_AUTO_TX1,
+					MAX_FRAME_RETRIES(retries) |
+					MAX_CCA_RETRIES(lp->max_cca_retries));
+
+	lp->max_frame_retries = retries;
+
+	return ret;
+}
+
+static int adf7242_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	struct adf7242_local *lp = hw->priv;
+
+	*level = lp->rssi;
+
+	dev_vdbg(&lp->spi->dev, "%s :Exit level=%d\n",
+		 __func__, *level);
+
+	return 0;
+}
+
+static int adf7242_start(struct ieee802154_hw *hw)
+{
+	struct adf7242_local *lp = hw->priv;
+
+	adf7242_cmd(lp, CMD_RC_PHY_RDY);
+	adf7242_clear_irqstat(lp);
+	enable_irq(lp->spi->irq);
+	set_bit(FLAG_START, &lp->flags);
+
+	return adf7242_cmd_rx(lp);
+}
+
+static void adf7242_stop(struct ieee802154_hw *hw)
+{
+	struct adf7242_local *lp = hw->priv;
+
+	disable_irq(lp->spi->irq);
+	cancel_delayed_work_sync(&lp->work);
+	adf7242_cmd(lp, CMD_RC_IDLE);
+	clear_bit(FLAG_START, &lp->flags);
+	adf7242_clear_irqstat(lp);
+}
+
+static int adf7242_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct adf7242_local *lp = hw->priv;
+	unsigned long freq;
+
+	dev_dbg(&lp->spi->dev, "%s :Channel=%d\n", __func__, channel);
+
+	might_sleep();
+
+	WARN_ON(page != 0);
+	WARN_ON(channel < 11);
+	WARN_ON(channel > 26);
+
+	freq = (2405 + 5 * (channel - 11)) * 100;
+	adf7242_cmd(lp, CMD_RC_PHY_RDY);
+
+	adf7242_write_reg(lp, REG_CH_FREQ0, freq);
+	adf7242_write_reg(lp, REG_CH_FREQ1, freq >> 8);
+	adf7242_write_reg(lp, REG_CH_FREQ2, freq >> 16);
+
+	if (test_bit(FLAG_START, &lp->flags))
+		return adf7242_cmd_rx(lp);
+	else
+		return adf7242_cmd(lp, CMD_RC_PHY_RDY);
+}
+
+static int adf7242_set_hw_addr_filt(struct ieee802154_hw *hw,
+				    struct ieee802154_hw_addr_filt *filt,
+				    unsigned long changed)
+{
+	struct adf7242_local *lp = hw->priv;
+	u8 reg;
+
+	dev_dbg(&lp->spi->dev, "%s :Changed=0x%lX\n", __func__, changed);
+
+	might_sleep();
+
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		u8 addr[8], i;
+
+		memcpy(addr, &filt->ieee_addr, 8);
+
+		for (i = 0; i < 8; i++)
+			adf7242_write_reg(lp, REG_IEEE_ADDR_0 + i, addr[i]);
+	}
+
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		u16 saddr = le16_to_cpu(filt->short_addr);
+
+		adf7242_write_reg(lp, REG_SHORT_ADDR_0, saddr);
+		adf7242_write_reg(lp, REG_SHORT_ADDR_1, saddr >> 8);
+	}
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		u16 pan_id = le16_to_cpu(filt->pan_id);
+
+		adf7242_write_reg(lp, REG_PAN_ID0, pan_id);
+		adf7242_write_reg(lp, REG_PAN_ID1, pan_id >> 8);
+	}
+
+	if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+		adf7242_read_reg(lp, REG_AUTO_CFG, &reg);
+		if (filt->pan_coord)
+			reg |= IS_PANCOORD;
+		else
+			reg &= ~IS_PANCOORD;
+		adf7242_write_reg(lp, REG_AUTO_CFG, reg);
+	}
+
+	return 0;
+}
+
+static int adf7242_set_promiscuous_mode(struct ieee802154_hw *hw, bool on)
+{
+	struct adf7242_local *lp = hw->priv;
+
+	dev_dbg(&lp->spi->dev, "%s : mode %d\n", __func__, on);
+
+	lp->promiscuous = on;
+
+	if (on) {
+		adf7242_write_reg(lp, REG_AUTO_CFG, 0);
+		return adf7242_write_reg(lp, REG_FFILT_CFG,
+				  ACCEPT_BEACON_FRAMES |
+				  ACCEPT_DATA_FRAMES |
+				  ACCEPT_MACCMD_FRAMES |
+				  ACCEPT_ALL_ADDRESS |
+				  ACCEPT_ACK_FRAMES |
+				  ACCEPT_RESERVED_FRAMES);
+	} else {
+		adf7242_write_reg(lp, REG_FFILT_CFG,
+				  ACCEPT_BEACON_FRAMES |
+				  ACCEPT_DATA_FRAMES |
+				  ACCEPT_MACCMD_FRAMES |
+				  ACCEPT_RESERVED_FRAMES);
+
+		return adf7242_write_reg(lp, REG_AUTO_CFG, RX_AUTO_ACK_EN);
+	}
+}
+
+static int adf7242_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct adf7242_local *lp = hw->priv;
+	s8 level = clamp_t(s8, mbm / 100, S8_MIN, S8_MAX);
+
+	dev_dbg(&lp->spi->dev, "%s : level %d\n", __func__, level);
+
+	return adf7242_write_reg(lp, REG_CCA1, level);
+}
+
+static int adf7242_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct adf7242_local *lp = hw->priv;
+	int ret;
+
+	/* ensure existing instances of the IRQ handler have completed */
+	disable_irq(lp->spi->irq);
+	set_bit(FLAG_XMIT, &lp->flags);
+	cancel_delayed_work_sync(&lp->work);
+	reinit_completion(&lp->tx_complete);
+	adf7242_cmd(lp, CMD_RC_PHY_RDY);
+	adf7242_clear_irqstat(lp);
+
+	ret = adf7242_write_fbuf(lp, skb->data, skb->len);
+	if (ret)
+		goto err;
+
+	ret = adf7242_cmd(lp, CMD_RC_CSMACA);
+	if (ret)
+		goto err;
+	enable_irq(lp->spi->irq);
+
+	ret = wait_for_completion_interruptible_timeout(&lp->tx_complete,
+							HZ / 10);
+	if (ret < 0)
+		goto err;
+	if (ret == 0) {
+		dev_dbg(&lp->spi->dev, "Timeout waiting for TX interrupt\n");
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	if (lp->tx_stat != SUCCESS) {
+		dev_dbg(&lp->spi->dev,
+			"Error xmit: Retry count exceeded Status=0x%x\n",
+			lp->tx_stat);
+		ret = -ECOMM;
+	} else {
+		ret = 0;
+	}
+
+err:
+	clear_bit(FLAG_XMIT, &lp->flags);
+	adf7242_cmd_rx(lp);
+
+	return ret;
+}
+
+static int adf7242_rx(struct adf7242_local *lp)
+{
+	struct sk_buff *skb;
+	size_t len;
+	int ret;
+	u8 lqi, len_u8, *data;
+
+	ret = adf7242_read_reg(lp, 0, &len_u8);
+	if (ret)
+		return ret;
+
+	len = len_u8;
+
+	if (!ieee802154_is_valid_psdu_len(len)) {
+		dev_dbg(&lp->spi->dev,
+			"corrupted frame received len %d\n", (int)len);
+		len = IEEE802154_MTU;
+	}
+
+	skb = dev_alloc_skb(len);
+	if (!skb) {
+		adf7242_cmd_rx(lp);
+		return -ENOMEM;
+	}
+
+	data = skb_put(skb, len);
+	ret = adf7242_read_fbuf(lp, data, len, true);
+	if (ret < 0) {
+		kfree_skb(skb);
+		adf7242_cmd_rx(lp);
+		return ret;
+	}
+
+	lqi = data[len - 2];
+	lp->rssi = data[len - 1];
+
+	ret = adf7242_cmd_rx(lp);
+
+	skb_trim(skb, len - 2);	/* Don't put RSSI/LQI or CRC into the frame */
+
+	ieee802154_rx_irqsafe(lp->hw, skb, lqi);
+
+	dev_dbg(&lp->spi->dev, "%s: ret=%d len=%d lqi=%d rssi=%d\n",
+		__func__, ret, (int)len, (int)lqi, lp->rssi);
+
+	return ret;
+}
+
+static const struct ieee802154_ops adf7242_ops = {
+	.owner = THIS_MODULE,
+	.xmit_sync = adf7242_xmit,
+	.ed = adf7242_ed,
+	.set_channel = adf7242_channel,
+	.set_hw_addr_filt = adf7242_set_hw_addr_filt,
+	.start = adf7242_start,
+	.stop = adf7242_stop,
+	.set_csma_params = adf7242_set_csma_params,
+	.set_frame_retries = adf7242_set_frame_retries,
+	.set_txpower = adf7242_set_txpower,
+	.set_promiscuous_mode = adf7242_set_promiscuous_mode,
+	.set_cca_ed_level = adf7242_set_cca_ed_level,
+};
+
+static void adf7242_debug(struct adf7242_local *lp, u8 irq1)
+{
+#ifdef DEBUG
+	u8 stat;
+
+	adf7242_status(lp, &stat);
+
+	dev_dbg(&lp->spi->dev, "%s IRQ1 = %X:\n%s%s%s%s%s%s%s%s\n",
+		__func__, irq1,
+		irq1 & IRQ_CCA_COMPLETE ? "IRQ_CCA_COMPLETE\n" : "",
+		irq1 & IRQ_SFD_RX ? "IRQ_SFD_RX\n" : "",
+		irq1 & IRQ_SFD_TX ? "IRQ_SFD_TX\n" : "",
+		irq1 & IRQ_RX_PKT_RCVD ? "IRQ_RX_PKT_RCVD\n" : "",
+		irq1 & IRQ_TX_PKT_SENT ? "IRQ_TX_PKT_SENT\n" : "",
+		irq1 & IRQ_CSMA_CA ? "IRQ_CSMA_CA\n" : "",
+		irq1 & IRQ_FRAME_VALID ? "IRQ_FRAME_VALID\n" : "",
+		irq1 & IRQ_ADDRESS_VALID ? "IRQ_ADDRESS_VALID\n" : "");
+
+	dev_dbg(&lp->spi->dev, "%s STATUS = %X:\n%s\n%s\n%s\n%s\n%s%s%s%s%s\n",
+		__func__, stat,
+		stat & STAT_SPI_READY ? "SPI_READY" : "SPI_BUSY",
+		stat & STAT_IRQ_STATUS ? "IRQ_PENDING" : "IRQ_CLEAR",
+		stat & STAT_RC_READY ? "RC_READY" : "RC_BUSY",
+		stat & STAT_CCA_RESULT ? "CHAN_IDLE" : "CHAN_BUSY",
+		(stat & 0xf) == RC_STATUS_IDLE ? "RC_STATUS_IDLE" : "",
+		(stat & 0xf) == RC_STATUS_MEAS ? "RC_STATUS_MEAS" : "",
+		(stat & 0xf) == RC_STATUS_PHY_RDY ? "RC_STATUS_PHY_RDY" : "",
+		(stat & 0xf) == RC_STATUS_RX ? "RC_STATUS_RX" : "",
+		(stat & 0xf) == RC_STATUS_TX ? "RC_STATUS_TX" : "");
+#endif
+}
+
+static irqreturn_t adf7242_isr(int irq, void *data)
+{
+	struct adf7242_local *lp = data;
+	unsigned int xmit;
+	u8 irq1;
+
+	mod_delayed_work(lp->wqueue, &lp->work, msecs_to_jiffies(400));
+	adf7242_read_reg(lp, REG_IRQ1_SRC1, &irq1);
+
+	if (!(irq1 & (IRQ_RX_PKT_RCVD | IRQ_CSMA_CA)))
+		dev_err(&lp->spi->dev, "%s :ERROR IRQ1 = 0x%X\n",
+			__func__, irq1);
+
+	adf7242_debug(lp, irq1);
+
+	xmit = test_bit(FLAG_XMIT, &lp->flags);
+
+	if (xmit && (irq1 & IRQ_CSMA_CA)) {
+		adf7242_wait_status(lp, RC_STATUS_PHY_RDY,
+				    RC_STATUS_MASK, __LINE__);
+
+		if (ADF7242_REPORT_CSMA_CA_STAT) {
+			u8 astat;
+
+			adf7242_read_reg(lp, REG_AUTO_STATUS, &astat);
+			astat &= AUTO_STATUS_MASK;
+
+			dev_dbg(&lp->spi->dev, "AUTO_STATUS = %X:\n%s%s%s%s\n",
+				astat,
+				astat == SUCCESS ? "SUCCESS" : "",
+				astat ==
+				SUCCESS_DATPEND ? "SUCCESS_DATPEND" : "",
+				astat == FAILURE_CSMACA ? "FAILURE_CSMACA" : "",
+				astat == FAILURE_NOACK ? "FAILURE_NOACK" : "");
+
+			/* save CSMA-CA completion status */
+			lp->tx_stat = astat;
+		} else {
+			lp->tx_stat = SUCCESS;
+		}
+		complete(&lp->tx_complete);
+		adf7242_clear_irqstat(lp);
+	} else if (!xmit && (irq1 & IRQ_RX_PKT_RCVD) &&
+		   (irq1 & IRQ_FRAME_VALID)) {
+		adf7242_rx(lp);
+	} else if (!xmit && test_bit(FLAG_START, &lp->flags)) {
+		/* Invalid packet received - drop it and restart */
+		dev_dbg(&lp->spi->dev, "%s:%d : ERROR IRQ1 = 0x%X\n",
+			__func__, __LINE__, irq1);
+		adf7242_cmd(lp, CMD_RC_PHY_RDY);
+		adf7242_cmd_rx(lp);
+	} else {
+		/* This can only be xmit without IRQ, likely a RX packet.
+		 * we get an TX IRQ shortly - do nothing or let the xmit
+		 * timeout handle this
+		 */
+
+		dev_dbg(&lp->spi->dev, "%s:%d : ERROR IRQ1 = 0x%X, xmit %d\n",
+			__func__, __LINE__, irq1, xmit);
+		adf7242_wait_status(lp, RC_STATUS_PHY_RDY,
+				    RC_STATUS_MASK, __LINE__);
+		complete(&lp->tx_complete);
+		adf7242_clear_irqstat(lp);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int adf7242_soft_reset(struct adf7242_local *lp, int line)
+{
+	dev_warn(&lp->spi->dev, "%s (line %d)\n", __func__, line);
+
+	if (test_bit(FLAG_START, &lp->flags))
+		disable_irq_nosync(lp->spi->irq);
+
+	adf7242_cmd(lp, CMD_RC_PC_RESET_NO_WAIT);
+	usleep_range(200, 250);
+	adf7242_write_reg(lp, REG_PKT_CFG, ADDON_EN | BIT(2));
+	adf7242_cmd(lp, CMD_RC_PHY_RDY);
+	adf7242_set_promiscuous_mode(lp->hw, lp->promiscuous);
+	adf7242_set_csma_params(lp->hw, lp->min_be, lp->max_be,
+				lp->max_cca_retries);
+	adf7242_clear_irqstat(lp);
+
+	if (test_bit(FLAG_START, &lp->flags)) {
+		enable_irq(lp->spi->irq);
+		return adf7242_cmd(lp, CMD_RC_RX);
+	}
+
+	return 0;
+}
+
+static int adf7242_hw_init(struct adf7242_local *lp)
+{
+	int ret;
+	const struct firmware *fw;
+
+	adf7242_cmd(lp, CMD_RC_RESET);
+	adf7242_cmd(lp, CMD_RC_IDLE);
+
+	/* get ADF7242 addon firmware
+	 * build this driver as module
+	 * and place under /lib/firmware/adf7242_firmware.bin
+	 * or compile firmware into the kernel.
+	 */
+	ret = request_firmware(&fw, FIRMWARE, &lp->spi->dev);
+	if (ret) {
+		dev_err(&lp->spi->dev,
+			"request_firmware() failed with %d\n", ret);
+		return ret;
+	}
+
+	ret = adf7242_upload_firmware(lp, (u8 *)fw->data, fw->size);
+	if (ret) {
+		dev_err(&lp->spi->dev,
+			"upload firmware failed with %d\n", ret);
+		release_firmware(fw);
+		return ret;
+	}
+
+	ret = adf7242_verify_firmware(lp, (u8 *)fw->data, fw->size);
+	if (ret) {
+		dev_err(&lp->spi->dev,
+			"verify firmware failed with %d\n", ret);
+		release_firmware(fw);
+		return ret;
+	}
+
+	adf7242_cmd(lp, CMD_RC_PC_RESET);
+
+	release_firmware(fw);
+
+	adf7242_write_reg(lp, REG_FFILT_CFG,
+			  ACCEPT_BEACON_FRAMES |
+			  ACCEPT_DATA_FRAMES |
+			  ACCEPT_MACCMD_FRAMES |
+			  ACCEPT_RESERVED_FRAMES);
+
+	adf7242_write_reg(lp, REG_AUTO_CFG, RX_AUTO_ACK_EN);
+
+	adf7242_write_reg(lp, REG_PKT_CFG, ADDON_EN | BIT(2));
+
+	adf7242_write_reg(lp, REG_EXTPA_MSC, 0xF1);
+	adf7242_write_reg(lp, REG_RXFE_CFG, 0x1D);
+
+	adf7242_write_reg(lp, REG_IRQ1_EN0, 0);
+	adf7242_write_reg(lp, REG_IRQ1_EN1, IRQ_RX_PKT_RCVD | IRQ_CSMA_CA);
+
+	adf7242_clear_irqstat(lp);
+	adf7242_write_reg(lp, REG_IRQ1_SRC0, 0xFF);
+
+	adf7242_cmd(lp, CMD_RC_IDLE);
+
+	return 0;
+}
+
+static int adf7242_stats_show(struct seq_file *file, void *offset)
+{
+	struct adf7242_local *lp = spi_get_drvdata(file->private);
+	u8 stat, irq1;
+
+	adf7242_status(lp, &stat);
+	adf7242_read_reg(lp, REG_IRQ1_SRC1, &irq1);
+
+	seq_printf(file, "IRQ1 = %X:\n%s%s%s%s%s%s%s%s\n", irq1,
+		   irq1 & IRQ_CCA_COMPLETE ? "IRQ_CCA_COMPLETE\n" : "",
+		   irq1 & IRQ_SFD_RX ? "IRQ_SFD_RX\n" : "",
+		   irq1 & IRQ_SFD_TX ? "IRQ_SFD_TX\n" : "",
+		   irq1 & IRQ_RX_PKT_RCVD ? "IRQ_RX_PKT_RCVD\n" : "",
+		   irq1 & IRQ_TX_PKT_SENT ? "IRQ_TX_PKT_SENT\n" : "",
+		   irq1 & IRQ_CSMA_CA ? "IRQ_CSMA_CA\n" : "",
+		   irq1 & IRQ_FRAME_VALID ? "IRQ_FRAME_VALID\n" : "",
+		   irq1 & IRQ_ADDRESS_VALID ? "IRQ_ADDRESS_VALID\n" : "");
+
+	seq_printf(file, "STATUS = %X:\n%s\n%s\n%s\n%s\n%s%s%s%s%s\n", stat,
+		   stat & STAT_SPI_READY ? "SPI_READY" : "SPI_BUSY",
+		   stat & STAT_IRQ_STATUS ? "IRQ_PENDING" : "IRQ_CLEAR",
+		   stat & STAT_RC_READY ? "RC_READY" : "RC_BUSY",
+		   stat & STAT_CCA_RESULT ? "CHAN_IDLE" : "CHAN_BUSY",
+		   (stat & 0xf) == RC_STATUS_IDLE ? "RC_STATUS_IDLE" : "",
+		   (stat & 0xf) == RC_STATUS_MEAS ? "RC_STATUS_MEAS" : "",
+		   (stat & 0xf) == RC_STATUS_PHY_RDY ? "RC_STATUS_PHY_RDY" : "",
+		   (stat & 0xf) == RC_STATUS_RX ? "RC_STATUS_RX" : "",
+		   (stat & 0xf) == RC_STATUS_TX ? "RC_STATUS_TX" : "");
+
+	seq_printf(file, "RSSI = %d\n", lp->rssi);
+
+	return 0;
+}
+
+static void adf7242_debugfs_init(struct adf7242_local *lp)
+{
+	char debugfs_dir_name[DNAME_INLINE_LEN + 1];
+
+	snprintf(debugfs_dir_name, sizeof(debugfs_dir_name),
+		 "adf7242-%s", dev_name(&lp->spi->dev));
+
+	lp->debugfs_root = debugfs_create_dir(debugfs_dir_name, NULL);
+
+	debugfs_create_devm_seqfile(&lp->spi->dev, "status", lp->debugfs_root,
+				    adf7242_stats_show);
+}
+
+static const s32 adf7242_powers[] = {
+	500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700,
+	-800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700,
+	-1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600,
+};
+
+static const s32 adf7242_ed_levels[] = {
+	-9000, -8900, -8800, -8700, -8600, -8500, -8400, -8300, -8200, -8100,
+	-8000, -7900, -7800, -7700, -7600, -7500, -7400, -7300, -7200, -7100,
+	-7000, -6900, -6800, -6700, -6600, -6500, -6400, -6300, -6200, -6100,
+	-6000, -5900, -5800, -5700, -5600, -5500, -5400, -5300, -5200, -5100,
+	-5000, -4900, -4800, -4700, -4600, -4500, -4400, -4300, -4200, -4100,
+	-4000, -3900, -3800, -3700, -3600, -3500, -3400, -3200, -3100, -3000
+};
+
+static int adf7242_probe(struct spi_device *spi)
+{
+	struct ieee802154_hw *hw;
+	struct adf7242_local *lp;
+	int ret, irq_type;
+
+	if (!spi->irq) {
+		dev_err(&spi->dev, "no IRQ specified\n");
+		return -EINVAL;
+	}
+
+	hw = ieee802154_alloc_hw(sizeof(*lp), &adf7242_ops);
+	if (!hw)
+		return -ENOMEM;
+
+	lp = hw->priv;
+	lp->hw = hw;
+	lp->spi = spi;
+
+	hw->priv = lp;
+	hw->parent = &spi->dev;
+	hw->extra_tx_headroom = 0;
+
+	/* We support only 2.4 Ghz */
+	hw->phy->supported.channels[0] = 0x7FFF800;
+
+	hw->flags = IEEE802154_HW_OMIT_CKSUM |
+		    IEEE802154_HW_CSMA_PARAMS |
+		    IEEE802154_HW_FRAME_RETRIES | IEEE802154_HW_AFILT |
+		    IEEE802154_HW_PROMISCUOUS;
+
+	hw->phy->flags = WPAN_PHY_FLAG_TXPOWER |
+			 WPAN_PHY_FLAG_CCA_ED_LEVEL |
+			 WPAN_PHY_FLAG_CCA_MODE;
+
+	hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY);
+
+	hw->phy->supported.cca_ed_levels = adf7242_ed_levels;
+	hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(adf7242_ed_levels);
+
+	hw->phy->cca.mode = NL802154_CCA_ENERGY;
+
+	hw->phy->supported.tx_powers = adf7242_powers;
+	hw->phy->supported.tx_powers_size = ARRAY_SIZE(adf7242_powers);
+
+	hw->phy->supported.min_minbe = 0;
+	hw->phy->supported.max_minbe = 8;
+
+	hw->phy->supported.min_maxbe = 3;
+	hw->phy->supported.max_maxbe = 8;
+
+	hw->phy->supported.min_frame_retries = 0;
+	hw->phy->supported.max_frame_retries = 15;
+
+	hw->phy->supported.min_csma_backoffs = 0;
+	hw->phy->supported.max_csma_backoffs = 5;
+
+	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
+
+	mutex_init(&lp->bmux);
+	init_completion(&lp->tx_complete);
+
+	/* Setup Status Message */
+	lp->stat_xfer.len = 1;
+	lp->stat_xfer.tx_buf = &lp->buf_stat_tx;
+	lp->stat_xfer.rx_buf = &lp->buf_stat_rx;
+	lp->buf_stat_tx = CMD_SPI_NOP;
+
+	spi_message_init(&lp->stat_msg);
+	spi_message_add_tail(&lp->stat_xfer, &lp->stat_msg);
+
+	spi_set_drvdata(spi, lp);
+	INIT_DELAYED_WORK(&lp->work, adf7242_rx_cal_work);
+	lp->wqueue = alloc_ordered_workqueue(dev_name(&spi->dev),
+					     WQ_MEM_RECLAIM);
+	if (unlikely(!lp->wqueue)) {
+		ret = -ENOMEM;
+		goto err_alloc_wq;
+	}
+
+	ret = adf7242_hw_init(lp);
+	if (ret)
+		goto err_hw_init;
+
+	irq_type = irq_get_trigger_type(spi->irq);
+	if (!irq_type)
+		irq_type = IRQF_TRIGGER_HIGH;
+
+	ret = devm_request_threaded_irq(&spi->dev, spi->irq, NULL, adf7242_isr,
+					irq_type | IRQF_ONESHOT,
+					dev_name(&spi->dev), lp);
+	if (ret)
+		goto err_hw_init;
+
+	disable_irq(spi->irq);
+
+	ret = ieee802154_register_hw(lp->hw);
+	if (ret)
+		goto err_hw_init;
+
+	dev_set_drvdata(&spi->dev, lp);
+
+	adf7242_debugfs_init(lp);
+
+	dev_info(&spi->dev, "mac802154 IRQ-%d registered\n", spi->irq);
+
+	return ret;
+
+err_hw_init:
+	destroy_workqueue(lp->wqueue);
+err_alloc_wq:
+	mutex_destroy(&lp->bmux);
+	ieee802154_free_hw(lp->hw);
+
+	return ret;
+}
+
+static void adf7242_remove(struct spi_device *spi)
+{
+	struct adf7242_local *lp = spi_get_drvdata(spi);
+
+	debugfs_remove_recursive(lp->debugfs_root);
+
+	ieee802154_unregister_hw(lp->hw);
+
+	cancel_delayed_work_sync(&lp->work);
+	destroy_workqueue(lp->wqueue);
+
+	mutex_destroy(&lp->bmux);
+	ieee802154_free_hw(lp->hw);
+}
+
+static const struct of_device_id adf7242_of_match[] = {
+	{ .compatible = "adi,adf7242", },
+	{ .compatible = "adi,adf7241", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adf7242_of_match);
+
+static const struct spi_device_id adf7242_device_id[] = {
+	{ .name = "adf7242", },
+	{ .name = "adf7241", },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, adf7242_device_id);
+
+static struct spi_driver adf7242_driver = {
+	.id_table = adf7242_device_id,
+	.driver = {
+		   .of_match_table = of_match_ptr(adf7242_of_match),
+		   .name = "adf7242",
+		   .owner = THIS_MODULE,
+		   },
+	.probe = adf7242_probe,
+	.remove = adf7242_remove,
+};
+
+module_spi_driver(adf7242_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("ADF7242 IEEE802.15.4 Transceiver Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
new file mode 100644
index 000000000..15f283b26
--- /dev/null
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -0,0 +1,1695 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AT86RF230/RF231 driver
+ *
+ * Copyright (C) 2009-2012 Siemens AG
+ *
+ * Written by:
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ * Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
+ * Alexander Aring <aar@pengutronix.de>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/hrtimer.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/at86rf230.h>
+#include <linux/regmap.h>
+#include <linux/skbuff.h>
+#include <linux/of_gpio.h>
+#include <linux/ieee802154.h>
+
+#include <net/mac802154.h>
+#include <net/cfg802154.h>
+
+#include "at86rf230.h"
+
+struct at86rf230_local;
+/* at86rf2xx chip depend data.
+ * All timings are in us.
+ */
+struct at86rf2xx_chip_data {
+	u16 t_sleep_cycle;
+	u16 t_channel_switch;
+	u16 t_reset_to_off;
+	u16 t_off_to_aack;
+	u16 t_off_to_tx_on;
+	u16 t_off_to_sleep;
+	u16 t_sleep_to_off;
+	u16 t_frame;
+	u16 t_p_ack;
+	int rssi_base_val;
+
+	int (*set_channel)(struct at86rf230_local *, u8, u8);
+	int (*set_txpower)(struct at86rf230_local *, s32);
+};
+
+#define AT86RF2XX_MAX_BUF		(127 + 3)
+/* tx retries to access the TX_ON state
+ * if it's above then force change will be started.
+ *
+ * We assume the max_frame_retries (7) value of 802.15.4 here.
+ */
+#define AT86RF2XX_MAX_TX_RETRIES	7
+/* We use the recommended 5 minutes timeout to recalibrate */
+#define AT86RF2XX_CAL_LOOP_TIMEOUT	(5 * 60 * HZ)
+
+struct at86rf230_state_change {
+	struct at86rf230_local *lp;
+	int irq;
+
+	struct hrtimer timer;
+	struct spi_message msg;
+	struct spi_transfer trx;
+	u8 buf[AT86RF2XX_MAX_BUF];
+
+	void (*complete)(void *context);
+	u8 from_state;
+	u8 to_state;
+	int trac;
+
+	bool free;
+};
+
+struct at86rf230_local {
+	struct spi_device *spi;
+
+	struct ieee802154_hw *hw;
+	struct at86rf2xx_chip_data *data;
+	struct regmap *regmap;
+	int slp_tr;
+	bool sleep;
+
+	struct completion state_complete;
+	struct at86rf230_state_change state;
+
+	unsigned long cal_timeout;
+	bool is_tx;
+	bool is_tx_from_off;
+	bool was_tx;
+	u8 tx_retry;
+	struct sk_buff *tx_skb;
+	struct at86rf230_state_change tx;
+};
+
+#define AT86RF2XX_NUMREGS 0x3F
+
+static void
+at86rf230_async_state_change(struct at86rf230_local *lp,
+			     struct at86rf230_state_change *ctx,
+			     const u8 state, void (*complete)(void *context));
+
+static inline void
+at86rf230_sleep(struct at86rf230_local *lp)
+{
+	if (gpio_is_valid(lp->slp_tr)) {
+		gpio_set_value(lp->slp_tr, 1);
+		usleep_range(lp->data->t_off_to_sleep,
+			     lp->data->t_off_to_sleep + 10);
+		lp->sleep = true;
+	}
+}
+
+static inline void
+at86rf230_awake(struct at86rf230_local *lp)
+{
+	if (gpio_is_valid(lp->slp_tr)) {
+		gpio_set_value(lp->slp_tr, 0);
+		usleep_range(lp->data->t_sleep_to_off,
+			     lp->data->t_sleep_to_off + 100);
+		lp->sleep = false;
+	}
+}
+
+static inline int
+__at86rf230_write(struct at86rf230_local *lp,
+		  unsigned int addr, unsigned int data)
+{
+	bool sleep = lp->sleep;
+	int ret;
+
+	/* awake for register setting if sleep */
+	if (sleep)
+		at86rf230_awake(lp);
+
+	ret = regmap_write(lp->regmap, addr, data);
+
+	/* sleep again if was sleeping */
+	if (sleep)
+		at86rf230_sleep(lp);
+
+	return ret;
+}
+
+static inline int
+__at86rf230_read(struct at86rf230_local *lp,
+		 unsigned int addr, unsigned int *data)
+{
+	bool sleep = lp->sleep;
+	int ret;
+
+	/* awake for register setting if sleep */
+	if (sleep)
+		at86rf230_awake(lp);
+
+	ret = regmap_read(lp->regmap, addr, data);
+
+	/* sleep again if was sleeping */
+	if (sleep)
+		at86rf230_sleep(lp);
+
+	return ret;
+}
+
+static inline int
+at86rf230_read_subreg(struct at86rf230_local *lp,
+		      unsigned int addr, unsigned int mask,
+		      unsigned int shift, unsigned int *data)
+{
+	int rc;
+
+	rc = __at86rf230_read(lp, addr, data);
+	if (!rc)
+		*data = (*data & mask) >> shift;
+
+	return rc;
+}
+
+static inline int
+at86rf230_write_subreg(struct at86rf230_local *lp,
+		       unsigned int addr, unsigned int mask,
+		       unsigned int shift, unsigned int data)
+{
+	bool sleep = lp->sleep;
+	int ret;
+
+	/* awake for register setting if sleep */
+	if (sleep)
+		at86rf230_awake(lp);
+
+	ret = regmap_update_bits(lp->regmap, addr, mask, data << shift);
+
+	/* sleep again if was sleeping */
+	if (sleep)
+		at86rf230_sleep(lp);
+
+	return ret;
+}
+
+static inline void
+at86rf230_slp_tr_rising_edge(struct at86rf230_local *lp)
+{
+	gpio_set_value(lp->slp_tr, 1);
+	udelay(1);
+	gpio_set_value(lp->slp_tr, 0);
+}
+
+static bool
+at86rf230_reg_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RG_TRX_STATE:
+	case RG_TRX_CTRL_0:
+	case RG_TRX_CTRL_1:
+	case RG_PHY_TX_PWR:
+	case RG_PHY_ED_LEVEL:
+	case RG_PHY_CC_CCA:
+	case RG_CCA_THRES:
+	case RG_RX_CTRL:
+	case RG_SFD_VALUE:
+	case RG_TRX_CTRL_2:
+	case RG_ANT_DIV:
+	case RG_IRQ_MASK:
+	case RG_VREG_CTRL:
+	case RG_BATMON:
+	case RG_XOSC_CTRL:
+	case RG_RX_SYN:
+	case RG_XAH_CTRL_1:
+	case RG_FTN_CTRL:
+	case RG_PLL_CF:
+	case RG_PLL_DCU:
+	case RG_SHORT_ADDR_0:
+	case RG_SHORT_ADDR_1:
+	case RG_PAN_ID_0:
+	case RG_PAN_ID_1:
+	case RG_IEEE_ADDR_0:
+	case RG_IEEE_ADDR_1:
+	case RG_IEEE_ADDR_2:
+	case RG_IEEE_ADDR_3:
+	case RG_IEEE_ADDR_4:
+	case RG_IEEE_ADDR_5:
+	case RG_IEEE_ADDR_6:
+	case RG_IEEE_ADDR_7:
+	case RG_XAH_CTRL_0:
+	case RG_CSMA_SEED_0:
+	case RG_CSMA_SEED_1:
+	case RG_CSMA_BE:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+at86rf230_reg_readable(struct device *dev, unsigned int reg)
+{
+	bool rc;
+
+	/* all writeable are also readable */
+	rc = at86rf230_reg_writeable(dev, reg);
+	if (rc)
+		return rc;
+
+	/* readonly regs */
+	switch (reg) {
+	case RG_TRX_STATUS:
+	case RG_PHY_RSSI:
+	case RG_IRQ_STATUS:
+	case RG_PART_NUM:
+	case RG_VERSION_NUM:
+	case RG_MAN_ID_1:
+	case RG_MAN_ID_0:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+at86rf230_reg_volatile(struct device *dev, unsigned int reg)
+{
+	/* can be changed during runtime */
+	switch (reg) {
+	case RG_TRX_STATUS:
+	case RG_TRX_STATE:
+	case RG_PHY_RSSI:
+	case RG_PHY_ED_LEVEL:
+	case RG_IRQ_STATUS:
+	case RG_VREG_CTRL:
+	case RG_PLL_CF:
+	case RG_PLL_DCU:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+at86rf230_reg_precious(struct device *dev, unsigned int reg)
+{
+	/* don't clear irq line on read */
+	switch (reg) {
+	case RG_IRQ_STATUS:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config at86rf230_regmap_spi_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.write_flag_mask = CMD_REG | CMD_WRITE,
+	.read_flag_mask = CMD_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = AT86RF2XX_NUMREGS,
+	.writeable_reg = at86rf230_reg_writeable,
+	.readable_reg = at86rf230_reg_readable,
+	.volatile_reg = at86rf230_reg_volatile,
+	.precious_reg = at86rf230_reg_precious,
+};
+
+static void
+at86rf230_async_error_recover_complete(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+
+	if (ctx->free)
+		kfree(ctx);
+
+	if (lp->was_tx) {
+		lp->was_tx = 0;
+		ieee802154_xmit_hw_error(lp->hw, lp->tx_skb);
+	}
+}
+
+static void
+at86rf230_async_error_recover(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+
+	if (lp->is_tx) {
+		lp->was_tx = 1;
+		lp->is_tx = 0;
+	}
+
+	at86rf230_async_state_change(lp, ctx, STATE_RX_AACK_ON,
+				     at86rf230_async_error_recover_complete);
+}
+
+static inline void
+at86rf230_async_error(struct at86rf230_local *lp,
+		      struct at86rf230_state_change *ctx, int rc)
+{
+	dev_err(&lp->spi->dev, "spi_async error %d\n", rc);
+
+	at86rf230_async_state_change(lp, ctx, STATE_FORCE_TRX_OFF,
+				     at86rf230_async_error_recover);
+}
+
+/* Generic function to get some register value in async mode */
+static void
+at86rf230_async_read_reg(struct at86rf230_local *lp, u8 reg,
+			 struct at86rf230_state_change *ctx,
+			 void (*complete)(void *context))
+{
+	int rc;
+
+	u8 *tx_buf = ctx->buf;
+
+	tx_buf[0] = (reg & CMD_REG_MASK) | CMD_REG;
+	ctx->msg.complete = complete;
+	rc = spi_async(lp->spi, &ctx->msg);
+	if (rc)
+		at86rf230_async_error(lp, ctx, rc);
+}
+
+static void
+at86rf230_async_write_reg(struct at86rf230_local *lp, u8 reg, u8 val,
+			  struct at86rf230_state_change *ctx,
+			  void (*complete)(void *context))
+{
+	int rc;
+
+	ctx->buf[0] = (reg & CMD_REG_MASK) | CMD_REG | CMD_WRITE;
+	ctx->buf[1] = val;
+	ctx->msg.complete = complete;
+	rc = spi_async(lp->spi, &ctx->msg);
+	if (rc)
+		at86rf230_async_error(lp, ctx, rc);
+}
+
+static void
+at86rf230_async_state_assert(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+	const u8 *buf = ctx->buf;
+	const u8 trx_state = buf[1] & TRX_STATE_MASK;
+
+	/* Assert state change */
+	if (trx_state != ctx->to_state) {
+		/* Special handling if transceiver state is in
+		 * STATE_BUSY_RX_AACK and a SHR was detected.
+		 */
+		if  (trx_state == STATE_BUSY_RX_AACK) {
+			/* Undocumented race condition. If we send a state
+			 * change to STATE_RX_AACK_ON the transceiver could
+			 * change his state automatically to STATE_BUSY_RX_AACK
+			 * if a SHR was detected. This is not an error, but we
+			 * can't assert this.
+			 */
+			if (ctx->to_state == STATE_RX_AACK_ON)
+				goto done;
+
+			/* If we change to STATE_TX_ON without forcing and
+			 * transceiver state is STATE_BUSY_RX_AACK, we wait
+			 * 'tFrame + tPAck' receiving time. In this time the
+			 * PDU should be received. If the transceiver is still
+			 * in STATE_BUSY_RX_AACK, we run a force state change
+			 * to STATE_TX_ON. This is a timeout handling, if the
+			 * transceiver stucks in STATE_BUSY_RX_AACK.
+			 *
+			 * Additional we do several retries to try to get into
+			 * TX_ON state without forcing. If the retries are
+			 * higher or equal than AT86RF2XX_MAX_TX_RETRIES we
+			 * will do a force change.
+			 */
+			if (ctx->to_state == STATE_TX_ON ||
+			    ctx->to_state == STATE_TRX_OFF) {
+				u8 state = ctx->to_state;
+
+				if (lp->tx_retry >= AT86RF2XX_MAX_TX_RETRIES)
+					state = STATE_FORCE_TRX_OFF;
+				lp->tx_retry++;
+
+				at86rf230_async_state_change(lp, ctx, state,
+							     ctx->complete);
+				return;
+			}
+		}
+
+		dev_warn(&lp->spi->dev, "unexcept state change from 0x%02x to 0x%02x. Actual state: 0x%02x\n",
+			 ctx->from_state, ctx->to_state, trx_state);
+	}
+
+done:
+	if (ctx->complete)
+		ctx->complete(context);
+}
+
+static enum hrtimer_restart at86rf230_async_state_timer(struct hrtimer *timer)
+{
+	struct at86rf230_state_change *ctx =
+		container_of(timer, struct at86rf230_state_change, timer);
+	struct at86rf230_local *lp = ctx->lp;
+
+	at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx,
+				 at86rf230_async_state_assert);
+
+	return HRTIMER_NORESTART;
+}
+
+/* Do state change timing delay. */
+static void
+at86rf230_async_state_delay(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+	struct at86rf2xx_chip_data *c = lp->data;
+	bool force = false;
+	ktime_t tim;
+
+	/* The force state changes are will show as normal states in the
+	 * state status subregister. We change the to_state to the
+	 * corresponding one and remember if it was a force change, this
+	 * differs if we do a state change from STATE_BUSY_RX_AACK.
+	 */
+	switch (ctx->to_state) {
+	case STATE_FORCE_TX_ON:
+		ctx->to_state = STATE_TX_ON;
+		force = true;
+		break;
+	case STATE_FORCE_TRX_OFF:
+		ctx->to_state = STATE_TRX_OFF;
+		force = true;
+		break;
+	default:
+		break;
+	}
+
+	switch (ctx->from_state) {
+	case STATE_TRX_OFF:
+		switch (ctx->to_state) {
+		case STATE_RX_AACK_ON:
+			tim = c->t_off_to_aack * NSEC_PER_USEC;
+			/* state change from TRX_OFF to RX_AACK_ON to do a
+			 * calibration, we need to reset the timeout for the
+			 * next one.
+			 */
+			lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT;
+			goto change;
+		case STATE_TX_ARET_ON:
+		case STATE_TX_ON:
+			tim = c->t_off_to_tx_on * NSEC_PER_USEC;
+			/* state change from TRX_OFF to TX_ON or ARET_ON to do
+			 * a calibration, we need to reset the timeout for the
+			 * next one.
+			 */
+			lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT;
+			goto change;
+		default:
+			break;
+		}
+		break;
+	case STATE_BUSY_RX_AACK:
+		switch (ctx->to_state) {
+		case STATE_TRX_OFF:
+		case STATE_TX_ON:
+			/* Wait for worst case receiving time if we
+			 * didn't make a force change from BUSY_RX_AACK
+			 * to TX_ON or TRX_OFF.
+			 */
+			if (!force) {
+				tim = (c->t_frame + c->t_p_ack) * NSEC_PER_USEC;
+				goto change;
+			}
+			break;
+		default:
+			break;
+		}
+		break;
+	/* Default value, means RESET state */
+	case STATE_P_ON:
+		switch (ctx->to_state) {
+		case STATE_TRX_OFF:
+			tim = c->t_reset_to_off * NSEC_PER_USEC;
+			goto change;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	/* Default delay is 1us in the most cases */
+	udelay(1);
+	at86rf230_async_state_timer(&ctx->timer);
+	return;
+
+change:
+	hrtimer_start(&ctx->timer, tim, HRTIMER_MODE_REL);
+}
+
+static void
+at86rf230_async_state_change_start(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+	u8 *buf = ctx->buf;
+	const u8 trx_state = buf[1] & TRX_STATE_MASK;
+
+	/* Check for "possible" STATE_TRANSITION_IN_PROGRESS */
+	if (trx_state == STATE_TRANSITION_IN_PROGRESS) {
+		udelay(1);
+		at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx,
+					 at86rf230_async_state_change_start);
+		return;
+	}
+
+	/* Check if we already are in the state which we change in */
+	if (trx_state == ctx->to_state) {
+		if (ctx->complete)
+			ctx->complete(context);
+		return;
+	}
+
+	/* Set current state to the context of state change */
+	ctx->from_state = trx_state;
+
+	/* Going into the next step for a state change which do a timing
+	 * relevant delay.
+	 */
+	at86rf230_async_write_reg(lp, RG_TRX_STATE, ctx->to_state, ctx,
+				  at86rf230_async_state_delay);
+}
+
+static void
+at86rf230_async_state_change(struct at86rf230_local *lp,
+			     struct at86rf230_state_change *ctx,
+			     const u8 state, void (*complete)(void *context))
+{
+	/* Initialization for the state change context */
+	ctx->to_state = state;
+	ctx->complete = complete;
+	at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx,
+				 at86rf230_async_state_change_start);
+}
+
+static void
+at86rf230_sync_state_change_complete(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+
+	complete(&lp->state_complete);
+}
+
+/* This function do a sync framework above the async state change.
+ * Some callbacks of the IEEE 802.15.4 driver interface need to be
+ * handled synchronously.
+ */
+static int
+at86rf230_sync_state_change(struct at86rf230_local *lp, unsigned int state)
+{
+	unsigned long rc;
+
+	at86rf230_async_state_change(lp, &lp->state, state,
+				     at86rf230_sync_state_change_complete);
+
+	rc = wait_for_completion_timeout(&lp->state_complete,
+					 msecs_to_jiffies(100));
+	if (!rc) {
+		at86rf230_async_error(lp, &lp->state, -ETIMEDOUT);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static void
+at86rf230_tx_complete(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+
+	if (ctx->trac == IEEE802154_SUCCESS)
+		ieee802154_xmit_complete(lp->hw, lp->tx_skb, false);
+	else
+		ieee802154_xmit_error(lp->hw, lp->tx_skb, ctx->trac);
+
+	kfree(ctx);
+}
+
+static void
+at86rf230_tx_on(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+
+	at86rf230_async_state_change(lp, ctx, STATE_RX_AACK_ON,
+				     at86rf230_tx_complete);
+}
+
+static void
+at86rf230_tx_trac_check(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+	u8 trac = TRAC_MASK(ctx->buf[1]);
+
+	switch (trac) {
+	case TRAC_SUCCESS:
+	case TRAC_SUCCESS_DATA_PENDING:
+		ctx->trac = IEEE802154_SUCCESS;
+		break;
+	case TRAC_CHANNEL_ACCESS_FAILURE:
+		ctx->trac = IEEE802154_CHANNEL_ACCESS_FAILURE;
+		break;
+	case TRAC_NO_ACK:
+		ctx->trac = IEEE802154_NO_ACK;
+		break;
+	default:
+		ctx->trac = IEEE802154_SYSTEM_ERROR;
+	}
+
+	at86rf230_async_state_change(lp, ctx, STATE_TX_ON, at86rf230_tx_on);
+}
+
+static void
+at86rf230_rx_read_frame_complete(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+	const u8 *buf = ctx->buf;
+	struct sk_buff *skb;
+	u8 len, lqi;
+
+	len = buf[1];
+	if (!ieee802154_is_valid_psdu_len(len)) {
+		dev_vdbg(&lp->spi->dev, "corrupted frame received\n");
+		len = IEEE802154_MTU;
+	}
+	lqi = buf[2 + len];
+
+	skb = dev_alloc_skb(IEEE802154_MTU);
+	if (!skb) {
+		dev_vdbg(&lp->spi->dev, "failed to allocate sk_buff\n");
+		kfree(ctx);
+		return;
+	}
+
+	skb_put_data(skb, buf + 2, len);
+	ieee802154_rx_irqsafe(lp->hw, skb, lqi);
+	kfree(ctx);
+}
+
+static void
+at86rf230_rx_trac_check(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+	u8 *buf = ctx->buf;
+	int rc;
+
+	buf[0] = CMD_FB;
+	ctx->trx.len = AT86RF2XX_MAX_BUF;
+	ctx->msg.complete = at86rf230_rx_read_frame_complete;
+	rc = spi_async(lp->spi, &ctx->msg);
+	if (rc) {
+		ctx->trx.len = 2;
+		at86rf230_async_error(lp, ctx, rc);
+	}
+}
+
+static void
+at86rf230_irq_trx_end(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+
+	if (lp->is_tx) {
+		lp->is_tx = 0;
+		at86rf230_async_read_reg(lp, RG_TRX_STATE, ctx,
+					 at86rf230_tx_trac_check);
+	} else {
+		at86rf230_async_read_reg(lp, RG_TRX_STATE, ctx,
+					 at86rf230_rx_trac_check);
+	}
+}
+
+static void
+at86rf230_irq_status(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+	const u8 *buf = ctx->buf;
+	u8 irq = buf[1];
+
+	enable_irq(lp->spi->irq);
+
+	if (irq & IRQ_TRX_END) {
+		at86rf230_irq_trx_end(ctx);
+	} else {
+		dev_err(&lp->spi->dev, "not supported irq %02x received\n",
+			irq);
+		kfree(ctx);
+	}
+}
+
+static void
+at86rf230_setup_spi_messages(struct at86rf230_local *lp,
+			     struct at86rf230_state_change *state)
+{
+	state->lp = lp;
+	state->irq = lp->spi->irq;
+	spi_message_init(&state->msg);
+	state->msg.context = state;
+	state->trx.len = 2;
+	state->trx.tx_buf = state->buf;
+	state->trx.rx_buf = state->buf;
+	spi_message_add_tail(&state->trx, &state->msg);
+	hrtimer_init(&state->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	state->timer.function = at86rf230_async_state_timer;
+}
+
+static irqreturn_t at86rf230_isr(int irq, void *data)
+{
+	struct at86rf230_local *lp = data;
+	struct at86rf230_state_change *ctx;
+	int rc;
+
+	disable_irq_nosync(irq);
+
+	ctx = kzalloc(sizeof(*ctx), GFP_ATOMIC);
+	if (!ctx) {
+		enable_irq(irq);
+		return IRQ_NONE;
+	}
+
+	at86rf230_setup_spi_messages(lp, ctx);
+	/* tell on error handling to free ctx */
+	ctx->free = true;
+
+	ctx->buf[0] = (RG_IRQ_STATUS & CMD_REG_MASK) | CMD_REG;
+	ctx->msg.complete = at86rf230_irq_status;
+	rc = spi_async(lp->spi, &ctx->msg);
+	if (rc) {
+		at86rf230_async_error(lp, ctx, rc);
+		enable_irq(irq);
+		return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void
+at86rf230_write_frame_complete(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+
+	ctx->trx.len = 2;
+
+	if (gpio_is_valid(lp->slp_tr))
+		at86rf230_slp_tr_rising_edge(lp);
+	else
+		at86rf230_async_write_reg(lp, RG_TRX_STATE, STATE_BUSY_TX, ctx,
+					  NULL);
+}
+
+static void
+at86rf230_write_frame(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+	struct sk_buff *skb = lp->tx_skb;
+	u8 *buf = ctx->buf;
+	int rc;
+
+	lp->is_tx = 1;
+
+	buf[0] = CMD_FB | CMD_WRITE;
+	buf[1] = skb->len + 2;
+	memcpy(buf + 2, skb->data, skb->len);
+	ctx->trx.len = skb->len + 2;
+	ctx->msg.complete = at86rf230_write_frame_complete;
+	rc = spi_async(lp->spi, &ctx->msg);
+	if (rc) {
+		ctx->trx.len = 2;
+		at86rf230_async_error(lp, ctx, rc);
+	}
+}
+
+static void
+at86rf230_xmit_tx_on(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+
+	at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON,
+				     at86rf230_write_frame);
+}
+
+static void
+at86rf230_xmit_start(void *context)
+{
+	struct at86rf230_state_change *ctx = context;
+	struct at86rf230_local *lp = ctx->lp;
+
+	/* check if we change from off state */
+	if (lp->is_tx_from_off)
+		at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON,
+					     at86rf230_write_frame);
+	else
+		at86rf230_async_state_change(lp, ctx, STATE_TX_ON,
+					     at86rf230_xmit_tx_on);
+}
+
+static int
+at86rf230_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct at86rf230_local *lp = hw->priv;
+	struct at86rf230_state_change *ctx = &lp->tx;
+
+	lp->tx_skb = skb;
+	lp->tx_retry = 0;
+
+	/* After 5 minutes in PLL and the same frequency we run again the
+	 * calibration loops which is recommended by at86rf2xx datasheets.
+	 *
+	 * The calibration is initiate by a state change from TRX_OFF
+	 * to TX_ON, the lp->cal_timeout should be reinit by state_delay
+	 * function then to start in the next 5 minutes.
+	 */
+	if (time_is_before_jiffies(lp->cal_timeout)) {
+		lp->is_tx_from_off = true;
+		at86rf230_async_state_change(lp, ctx, STATE_TRX_OFF,
+					     at86rf230_xmit_start);
+	} else {
+		lp->is_tx_from_off = false;
+		at86rf230_xmit_start(ctx);
+	}
+
+	return 0;
+}
+
+static int
+at86rf230_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	WARN_ON(!level);
+	*level = 0xbe;
+	return 0;
+}
+
+static int
+at86rf230_start(struct ieee802154_hw *hw)
+{
+	struct at86rf230_local *lp = hw->priv;
+
+	at86rf230_awake(lp);
+	enable_irq(lp->spi->irq);
+
+	return at86rf230_sync_state_change(lp, STATE_RX_AACK_ON);
+}
+
+static void
+at86rf230_stop(struct ieee802154_hw *hw)
+{
+	struct at86rf230_local *lp = hw->priv;
+	u8 csma_seed[2];
+
+	at86rf230_sync_state_change(lp, STATE_FORCE_TRX_OFF);
+
+	disable_irq(lp->spi->irq);
+
+	/* It's recommended to set random new csma_seeds before sleep state.
+	 * Makes only sense in the stop callback, not doing this inside of
+	 * at86rf230_sleep, this is also used when we don't transmit afterwards
+	 * when calling start callback again.
+	 */
+	get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
+	at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
+	at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]);
+
+	at86rf230_sleep(lp);
+}
+
+static int
+at86rf23x_set_channel(struct at86rf230_local *lp, u8 page, u8 channel)
+{
+	return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
+}
+
+#define AT86RF2XX_MAX_ED_LEVELS 0xF
+static const s32 at86rf233_ed_levels[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000, -7800, -7600,
+	-7400, -7200, -7000, -6800, -6600, -6400,
+};
+
+static const s32 at86rf231_ed_levels[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-9100, -8900, -8700, -8500, -8300, -8100, -7900, -7700, -7500, -7300,
+	-7100, -6900, -6700, -6500, -6300, -6100,
+};
+
+static const s32 at86rf212_ed_levels_100[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-10000, -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200,
+	-8000, -7800, -7600, -7400, -7200, -7000,
+};
+
+static const s32 at86rf212_ed_levels_98[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000,
+	-7800, -7600, -7400, -7200, -7000, -6800,
+};
+
+static inline int
+at86rf212_update_cca_ed_level(struct at86rf230_local *lp, int rssi_base_val)
+{
+	unsigned int cca_ed_thres;
+	int rc;
+
+	rc = at86rf230_read_subreg(lp, SR_CCA_ED_THRES, &cca_ed_thres);
+	if (rc < 0)
+		return rc;
+
+	switch (rssi_base_val) {
+	case -98:
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_98;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_98);
+		lp->hw->phy->cca_ed_level = at86rf212_ed_levels_98[cca_ed_thres];
+		break;
+	case -100:
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
+		lp->hw->phy->cca_ed_level = at86rf212_ed_levels_100[cca_ed_thres];
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	return 0;
+}
+
+static int
+at86rf212_set_channel(struct at86rf230_local *lp, u8 page, u8 channel)
+{
+	int rc;
+
+	if (channel == 0)
+		rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 0);
+	else
+		rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 1);
+	if (rc < 0)
+		return rc;
+
+	if (page == 0) {
+		rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 0);
+		lp->data->rssi_base_val = -100;
+	} else {
+		rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 1);
+		lp->data->rssi_base_val = -98;
+	}
+	if (rc < 0)
+		return rc;
+
+	rc = at86rf212_update_cca_ed_level(lp, lp->data->rssi_base_val);
+	if (rc < 0)
+		return rc;
+
+	return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
+}
+
+static int
+at86rf230_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct at86rf230_local *lp = hw->priv;
+	int rc;
+
+	rc = lp->data->set_channel(lp, page, channel);
+	/* Wait for PLL */
+	usleep_range(lp->data->t_channel_switch,
+		     lp->data->t_channel_switch + 10);
+
+	lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT;
+	return rc;
+}
+
+static int
+at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw,
+			   struct ieee802154_hw_addr_filt *filt,
+			   unsigned long changed)
+{
+	struct at86rf230_local *lp = hw->priv;
+
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		u16 addr = le16_to_cpu(filt->short_addr);
+
+		dev_vdbg(&lp->spi->dev, "%s called for saddr\n", __func__);
+		__at86rf230_write(lp, RG_SHORT_ADDR_0, addr);
+		__at86rf230_write(lp, RG_SHORT_ADDR_1, addr >> 8);
+	}
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		u16 pan = le16_to_cpu(filt->pan_id);
+
+		dev_vdbg(&lp->spi->dev, "%s called for pan id\n", __func__);
+		__at86rf230_write(lp, RG_PAN_ID_0, pan);
+		__at86rf230_write(lp, RG_PAN_ID_1, pan >> 8);
+	}
+
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		u8 i, addr[8];
+
+		memcpy(addr, &filt->ieee_addr, 8);
+		dev_vdbg(&lp->spi->dev, "%s called for IEEE addr\n", __func__);
+		for (i = 0; i < 8; i++)
+			__at86rf230_write(lp, RG_IEEE_ADDR_0 + i, addr[i]);
+	}
+
+	if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+		dev_vdbg(&lp->spi->dev, "%s called for panc change\n", __func__);
+		if (filt->pan_coord)
+			at86rf230_write_subreg(lp, SR_AACK_I_AM_COORD, 1);
+		else
+			at86rf230_write_subreg(lp, SR_AACK_I_AM_COORD, 0);
+	}
+
+	return 0;
+}
+
+#define AT86RF23X_MAX_TX_POWERS 0xF
+static const s32 at86rf233_powers[AT86RF23X_MAX_TX_POWERS + 1] = {
+	400, 370, 340, 300, 250, 200, 100, 0, -100, -200, -300, -400, -600,
+	-800, -1200, -1700,
+};
+
+static const s32 at86rf231_powers[AT86RF23X_MAX_TX_POWERS + 1] = {
+	300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700,
+	-900, -1200, -1700,
+};
+
+#define AT86RF212_MAX_TX_POWERS 0x1F
+static const s32 at86rf212_powers[AT86RF212_MAX_TX_POWERS + 1] = {
+	500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700,
+	-800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700,
+	-1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600,
+};
+
+static int
+at86rf23x_set_txpower(struct at86rf230_local *lp, s32 mbm)
+{
+	u32 i;
+
+	for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) {
+		if (lp->hw->phy->supported.tx_powers[i] == mbm)
+			return at86rf230_write_subreg(lp, SR_TX_PWR_23X, i);
+	}
+
+	return -EINVAL;
+}
+
+static int
+at86rf212_set_txpower(struct at86rf230_local *lp, s32 mbm)
+{
+	u32 i;
+
+	for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) {
+		if (lp->hw->phy->supported.tx_powers[i] == mbm)
+			return at86rf230_write_subreg(lp, SR_TX_PWR_212, i);
+	}
+
+	return -EINVAL;
+}
+
+static int
+at86rf230_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct at86rf230_local *lp = hw->priv;
+
+	return lp->data->set_txpower(lp, mbm);
+}
+
+static int
+at86rf230_set_lbt(struct ieee802154_hw *hw, bool on)
+{
+	struct at86rf230_local *lp = hw->priv;
+
+	return at86rf230_write_subreg(lp, SR_CSMA_LBT_MODE, on);
+}
+
+static int
+at86rf230_set_cca_mode(struct ieee802154_hw *hw,
+		       const struct wpan_phy_cca *cca)
+{
+	struct at86rf230_local *lp = hw->priv;
+	u8 val;
+
+	/* mapping 802.15.4 to driver spec */
+	switch (cca->mode) {
+	case NL802154_CCA_ENERGY:
+		val = 1;
+		break;
+	case NL802154_CCA_CARRIER:
+		val = 2;
+		break;
+	case NL802154_CCA_ENERGY_CARRIER:
+		switch (cca->opt) {
+		case NL802154_CCA_OPT_ENERGY_CARRIER_AND:
+			val = 3;
+			break;
+		case NL802154_CCA_OPT_ENERGY_CARRIER_OR:
+			val = 0;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return at86rf230_write_subreg(lp, SR_CCA_MODE, val);
+}
+
+static int
+at86rf230_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct at86rf230_local *lp = hw->priv;
+	u32 i;
+
+	for (i = 0; i < hw->phy->supported.cca_ed_levels_size; i++) {
+		if (hw->phy->supported.cca_ed_levels[i] == mbm)
+			return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, i);
+	}
+
+	return -EINVAL;
+}
+
+static int
+at86rf230_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be,
+			  u8 retries)
+{
+	struct at86rf230_local *lp = hw->priv;
+	int rc;
+
+	rc = at86rf230_write_subreg(lp, SR_MIN_BE, min_be);
+	if (rc)
+		return rc;
+
+	rc = at86rf230_write_subreg(lp, SR_MAX_BE, max_be);
+	if (rc)
+		return rc;
+
+	return at86rf230_write_subreg(lp, SR_MAX_CSMA_RETRIES, retries);
+}
+
+static int
+at86rf230_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
+{
+	struct at86rf230_local *lp = hw->priv;
+
+	return at86rf230_write_subreg(lp, SR_MAX_FRAME_RETRIES, retries);
+}
+
+static int
+at86rf230_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
+{
+	struct at86rf230_local *lp = hw->priv;
+	int rc;
+
+	if (on) {
+		rc = at86rf230_write_subreg(lp, SR_AACK_DIS_ACK, 1);
+		if (rc < 0)
+			return rc;
+
+		rc = at86rf230_write_subreg(lp, SR_AACK_PROM_MODE, 1);
+		if (rc < 0)
+			return rc;
+	} else {
+		rc = at86rf230_write_subreg(lp, SR_AACK_PROM_MODE, 0);
+		if (rc < 0)
+			return rc;
+
+		rc = at86rf230_write_subreg(lp, SR_AACK_DIS_ACK, 0);
+		if (rc < 0)
+			return rc;
+	}
+
+	return 0;
+}
+
+static const struct ieee802154_ops at86rf230_ops = {
+	.owner = THIS_MODULE,
+	.xmit_async = at86rf230_xmit,
+	.ed = at86rf230_ed,
+	.set_channel = at86rf230_channel,
+	.start = at86rf230_start,
+	.stop = at86rf230_stop,
+	.set_hw_addr_filt = at86rf230_set_hw_addr_filt,
+	.set_txpower = at86rf230_set_txpower,
+	.set_lbt = at86rf230_set_lbt,
+	.set_cca_mode = at86rf230_set_cca_mode,
+	.set_cca_ed_level = at86rf230_set_cca_ed_level,
+	.set_csma_params = at86rf230_set_csma_params,
+	.set_frame_retries = at86rf230_set_frame_retries,
+	.set_promiscuous_mode = at86rf230_set_promiscuous_mode,
+};
+
+static struct at86rf2xx_chip_data at86rf233_data = {
+	.t_sleep_cycle = 330,
+	.t_channel_switch = 11,
+	.t_reset_to_off = 26,
+	.t_off_to_aack = 80,
+	.t_off_to_tx_on = 80,
+	.t_off_to_sleep = 35,
+	.t_sleep_to_off = 1000,
+	.t_frame = 4096,
+	.t_p_ack = 545,
+	.rssi_base_val = -94,
+	.set_channel = at86rf23x_set_channel,
+	.set_txpower = at86rf23x_set_txpower,
+};
+
+static struct at86rf2xx_chip_data at86rf231_data = {
+	.t_sleep_cycle = 330,
+	.t_channel_switch = 24,
+	.t_reset_to_off = 37,
+	.t_off_to_aack = 110,
+	.t_off_to_tx_on = 110,
+	.t_off_to_sleep = 35,
+	.t_sleep_to_off = 1000,
+	.t_frame = 4096,
+	.t_p_ack = 545,
+	.rssi_base_val = -91,
+	.set_channel = at86rf23x_set_channel,
+	.set_txpower = at86rf23x_set_txpower,
+};
+
+static struct at86rf2xx_chip_data at86rf212_data = {
+	.t_sleep_cycle = 330,
+	.t_channel_switch = 11,
+	.t_reset_to_off = 26,
+	.t_off_to_aack = 200,
+	.t_off_to_tx_on = 200,
+	.t_off_to_sleep = 35,
+	.t_sleep_to_off = 1000,
+	.t_frame = 4096,
+	.t_p_ack = 545,
+	.rssi_base_val = -100,
+	.set_channel = at86rf212_set_channel,
+	.set_txpower = at86rf212_set_txpower,
+};
+
+static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim)
+{
+	int rc, irq_type, irq_pol = IRQ_ACTIVE_HIGH;
+	unsigned int dvdd;
+	u8 csma_seed[2];
+
+	rc = at86rf230_sync_state_change(lp, STATE_FORCE_TRX_OFF);
+	if (rc)
+		return rc;
+
+	irq_type = irq_get_trigger_type(lp->spi->irq);
+	if (irq_type == IRQ_TYPE_EDGE_FALLING ||
+	    irq_type == IRQ_TYPE_LEVEL_LOW)
+		irq_pol = IRQ_ACTIVE_LOW;
+
+	rc = at86rf230_write_subreg(lp, SR_IRQ_POLARITY, irq_pol);
+	if (rc)
+		return rc;
+
+	rc = at86rf230_write_subreg(lp, SR_RX_SAFE_MODE, 1);
+	if (rc)
+		return rc;
+
+	rc = at86rf230_write_subreg(lp, SR_IRQ_MASK, IRQ_TRX_END);
+	if (rc)
+		return rc;
+
+	/* reset values differs in at86rf231 and at86rf233 */
+	rc = at86rf230_write_subreg(lp, SR_IRQ_MASK_MODE, 0);
+	if (rc)
+		return rc;
+
+	get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
+	rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
+	if (rc)
+		return rc;
+	rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]);
+	if (rc)
+		return rc;
+
+	/* CLKM changes are applied immediately */
+	rc = at86rf230_write_subreg(lp, SR_CLKM_SHA_SEL, 0x00);
+	if (rc)
+		return rc;
+
+	/* Turn CLKM Off */
+	rc = at86rf230_write_subreg(lp, SR_CLKM_CTRL, 0x00);
+	if (rc)
+		return rc;
+	/* Wait the next SLEEP cycle */
+	usleep_range(lp->data->t_sleep_cycle,
+		     lp->data->t_sleep_cycle + 100);
+
+	/* xtal_trim value is calculated by:
+	 * CL = 0.5 * (CX + CTRIM + CPAR)
+	 *
+	 * whereas:
+	 * CL = capacitor of used crystal
+	 * CX = connected capacitors at xtal pins
+	 * CPAR = in all at86rf2xx datasheets this is a constant value 3 pF,
+	 *	  but this is different on each board setup. You need to fine
+	 *	  tuning this value via CTRIM.
+	 * CTRIM = variable capacitor setting. Resolution is 0.3 pF range is
+	 *	   0 pF upto 4.5 pF.
+	 *
+	 * Examples:
+	 * atben transceiver:
+	 *
+	 * CL = 8 pF
+	 * CX = 12 pF
+	 * CPAR = 3 pF (We assume the magic constant from datasheet)
+	 * CTRIM = 0.9 pF
+	 *
+	 * (12+0.9+3)/2 = 7.95 which is nearly at 8 pF
+	 *
+	 * xtal_trim = 0x3
+	 *
+	 * openlabs transceiver:
+	 *
+	 * CL = 16 pF
+	 * CX = 22 pF
+	 * CPAR = 3 pF (We assume the magic constant from datasheet)
+	 * CTRIM = 4.5 pF
+	 *
+	 * (22+4.5+3)/2 = 14.75 which is the nearest value to 16 pF
+	 *
+	 * xtal_trim = 0xf
+	 */
+	rc = at86rf230_write_subreg(lp, SR_XTAL_TRIM, xtal_trim);
+	if (rc)
+		return rc;
+
+	rc = at86rf230_read_subreg(lp, SR_DVDD_OK, &dvdd);
+	if (rc)
+		return rc;
+	if (!dvdd) {
+		dev_err(&lp->spi->dev, "DVDD error\n");
+		return -EINVAL;
+	}
+
+	/* Force setting slotted operation bit to 0. Sometimes the atben
+	 * sets this bit and I don't know why. We set this always force
+	 * to zero while probing.
+	 */
+	return at86rf230_write_subreg(lp, SR_SLOTTED_OPERATION, 0);
+}
+
+static int
+at86rf230_get_pdata(struct spi_device *spi, int *rstn, int *slp_tr,
+		    u8 *xtal_trim)
+{
+	struct at86rf230_platform_data *pdata = spi->dev.platform_data;
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node) {
+		if (!pdata)
+			return -ENOENT;
+
+		*rstn = pdata->rstn;
+		*slp_tr = pdata->slp_tr;
+		*xtal_trim = pdata->xtal_trim;
+		return 0;
+	}
+
+	*rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0);
+	*slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0);
+	ret = of_property_read_u8(spi->dev.of_node, "xtal-trim", xtal_trim);
+	if (ret < 0 && ret != -EINVAL)
+		return ret;
+
+	return 0;
+}
+
+static int
+at86rf230_detect_device(struct at86rf230_local *lp)
+{
+	unsigned int part, version, val;
+	u16 man_id = 0;
+	const char *chip;
+	int rc;
+
+	rc = __at86rf230_read(lp, RG_MAN_ID_0, &val);
+	if (rc)
+		return rc;
+	man_id |= val;
+
+	rc = __at86rf230_read(lp, RG_MAN_ID_1, &val);
+	if (rc)
+		return rc;
+	man_id |= (val << 8);
+
+	rc = __at86rf230_read(lp, RG_PART_NUM, &part);
+	if (rc)
+		return rc;
+
+	rc = __at86rf230_read(lp, RG_VERSION_NUM, &version);
+	if (rc)
+		return rc;
+
+	if (man_id != 0x001f) {
+		dev_err(&lp->spi->dev, "Non-Atmel dev found (MAN_ID %02x %02x)\n",
+			man_id >> 8, man_id & 0xFF);
+		return -EINVAL;
+	}
+
+	lp->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM |
+			IEEE802154_HW_CSMA_PARAMS |
+			IEEE802154_HW_FRAME_RETRIES | IEEE802154_HW_AFILT |
+			IEEE802154_HW_PROMISCUOUS;
+
+	lp->hw->phy->flags = WPAN_PHY_FLAG_TXPOWER |
+			     WPAN_PHY_FLAG_CCA_ED_LEVEL |
+			     WPAN_PHY_FLAG_CCA_MODE;
+
+	lp->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+		BIT(NL802154_CCA_CARRIER) | BIT(NL802154_CCA_ENERGY_CARRIER);
+	lp->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
+		BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
+
+	lp->hw->phy->cca.mode = NL802154_CCA_ENERGY;
+
+	switch (part) {
+	case 2:
+		chip = "at86rf230";
+		rc = -ENOTSUPP;
+		goto not_supp;
+	case 3:
+		chip = "at86rf231";
+		lp->data = &at86rf231_data;
+		lp->hw->phy->supported.channels[0] = 0x7FFF800;
+		lp->hw->phy->current_channel = 11;
+		lp->hw->phy->supported.tx_powers = at86rf231_powers;
+		lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf231_powers);
+		lp->hw->phy->supported.cca_ed_levels = at86rf231_ed_levels;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf231_ed_levels);
+		break;
+	case 7:
+		chip = "at86rf212";
+		lp->data = &at86rf212_data;
+		lp->hw->flags |= IEEE802154_HW_LBT;
+		lp->hw->phy->supported.channels[0] = 0x00007FF;
+		lp->hw->phy->supported.channels[2] = 0x00007FF;
+		lp->hw->phy->current_channel = 5;
+		lp->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH;
+		lp->hw->phy->supported.tx_powers = at86rf212_powers;
+		lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers);
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
+		break;
+	case 11:
+		chip = "at86rf233";
+		lp->data = &at86rf233_data;
+		lp->hw->phy->supported.channels[0] = 0x7FFF800;
+		lp->hw->phy->current_channel = 13;
+		lp->hw->phy->supported.tx_powers = at86rf233_powers;
+		lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf233_powers);
+		lp->hw->phy->supported.cca_ed_levels = at86rf233_ed_levels;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf233_ed_levels);
+		break;
+	default:
+		chip = "unknown";
+		rc = -ENOTSUPP;
+		goto not_supp;
+	}
+
+	lp->hw->phy->cca_ed_level = lp->hw->phy->supported.cca_ed_levels[7];
+	lp->hw->phy->transmit_power = lp->hw->phy->supported.tx_powers[0];
+
+not_supp:
+	dev_info(&lp->spi->dev, "Detected %s chip version %d\n", chip, version);
+
+	return rc;
+}
+
+static int at86rf230_probe(struct spi_device *spi)
+{
+	struct ieee802154_hw *hw;
+	struct at86rf230_local *lp;
+	unsigned int status;
+	int rc, irq_type, rstn, slp_tr;
+	u8 xtal_trim = 0;
+
+	if (!spi->irq) {
+		dev_err(&spi->dev, "no IRQ specified\n");
+		return -EINVAL;
+	}
+
+	rc = at86rf230_get_pdata(spi, &rstn, &slp_tr, &xtal_trim);
+	if (rc < 0) {
+		dev_err(&spi->dev, "failed to parse platform_data: %d\n", rc);
+		return rc;
+	}
+
+	if (gpio_is_valid(rstn)) {
+		rc = devm_gpio_request_one(&spi->dev, rstn,
+					   GPIOF_OUT_INIT_HIGH, "rstn");
+		if (rc)
+			return rc;
+	}
+
+	if (gpio_is_valid(slp_tr)) {
+		rc = devm_gpio_request_one(&spi->dev, slp_tr,
+					   GPIOF_OUT_INIT_LOW, "slp_tr");
+		if (rc)
+			return rc;
+	}
+
+	/* Reset */
+	if (gpio_is_valid(rstn)) {
+		udelay(1);
+		gpio_set_value_cansleep(rstn, 0);
+		udelay(1);
+		gpio_set_value_cansleep(rstn, 1);
+		usleep_range(120, 240);
+	}
+
+	hw = ieee802154_alloc_hw(sizeof(*lp), &at86rf230_ops);
+	if (!hw)
+		return -ENOMEM;
+
+	lp = hw->priv;
+	lp->hw = hw;
+	lp->spi = spi;
+	lp->slp_tr = slp_tr;
+	hw->parent = &spi->dev;
+	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
+
+	lp->regmap = devm_regmap_init_spi(spi, &at86rf230_regmap_spi_config);
+	if (IS_ERR(lp->regmap)) {
+		rc = PTR_ERR(lp->regmap);
+		dev_err(&spi->dev, "Failed to allocate register map: %d\n",
+			rc);
+		goto free_dev;
+	}
+
+	at86rf230_setup_spi_messages(lp, &lp->state);
+	at86rf230_setup_spi_messages(lp, &lp->tx);
+
+	rc = at86rf230_detect_device(lp);
+	if (rc < 0)
+		goto free_dev;
+
+	init_completion(&lp->state_complete);
+
+	spi_set_drvdata(spi, lp);
+
+	rc = at86rf230_hw_init(lp, xtal_trim);
+	if (rc)
+		goto free_dev;
+
+	/* Read irq status register to reset irq line */
+	rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &status);
+	if (rc)
+		goto free_dev;
+
+	irq_type = irq_get_trigger_type(spi->irq);
+	if (!irq_type)
+		irq_type = IRQF_TRIGGER_HIGH;
+
+	rc = devm_request_irq(&spi->dev, spi->irq, at86rf230_isr,
+			      IRQF_SHARED | irq_type, dev_name(&spi->dev), lp);
+	if (rc)
+		goto free_dev;
+
+	/* disable_irq by default and wait for starting hardware */
+	disable_irq(spi->irq);
+
+	/* going into sleep by default */
+	at86rf230_sleep(lp);
+
+	rc = ieee802154_register_hw(lp->hw);
+	if (rc)
+		goto free_dev;
+
+	return rc;
+
+free_dev:
+	ieee802154_free_hw(lp->hw);
+
+	return rc;
+}
+
+static void at86rf230_remove(struct spi_device *spi)
+{
+	struct at86rf230_local *lp = spi_get_drvdata(spi);
+
+	/* mask all at86rf230 irq's */
+	at86rf230_write_subreg(lp, SR_IRQ_MASK, 0);
+	ieee802154_unregister_hw(lp->hw);
+	ieee802154_free_hw(lp->hw);
+	dev_dbg(&spi->dev, "unregistered at86rf230\n");
+}
+
+static const struct of_device_id at86rf230_of_match[] = {
+	{ .compatible = "atmel,at86rf230", },
+	{ .compatible = "atmel,at86rf231", },
+	{ .compatible = "atmel,at86rf233", },
+	{ .compatible = "atmel,at86rf212", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, at86rf230_of_match);
+
+static const struct spi_device_id at86rf230_device_id[] = {
+	{ .name = "at86rf230", },
+	{ .name = "at86rf231", },
+	{ .name = "at86rf233", },
+	{ .name = "at86rf212", },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, at86rf230_device_id);
+
+static struct spi_driver at86rf230_driver = {
+	.id_table = at86rf230_device_id,
+	.driver = {
+		.of_match_table = of_match_ptr(at86rf230_of_match),
+		.name	= "at86rf230",
+	},
+	.probe      = at86rf230_probe,
+	.remove     = at86rf230_remove,
+};
+
+module_spi_driver(at86rf230_driver);
+
+MODULE_DESCRIPTION("AT86RF230 Transceiver Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ieee802154/at86rf230.h b/drivers/net/ieee802154/at86rf230.h
new file mode 100644
index 000000000..042bb2728
--- /dev/null
+++ b/drivers/net/ieee802154/at86rf230.h
@@ -0,0 +1,220 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AT86RF230/RF231 driver
+ *
+ * Copyright (C) 2009-2012 Siemens AG
+ *
+ * Written by:
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ * Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
+ */
+
+#ifndef _AT86RF230_H
+#define _AT86RF230_H
+
+#define RG_TRX_STATUS	(0x01)
+#define SR_TRX_STATUS		0x01, 0x1f, 0
+#define SR_RESERVED_01_3	0x01, 0x20, 5
+#define SR_CCA_STATUS		0x01, 0x40, 6
+#define SR_CCA_DONE		0x01, 0x80, 7
+#define RG_TRX_STATE	(0x02)
+#define SR_TRX_CMD		0x02, 0x1f, 0
+#define SR_TRAC_STATUS		0x02, 0xe0, 5
+#define RG_TRX_CTRL_0	(0x03)
+#define SR_CLKM_CTRL		0x03, 0x07, 0
+#define SR_CLKM_SHA_SEL		0x03, 0x08, 3
+#define SR_PAD_IO_CLKM		0x03, 0x30, 4
+#define SR_PAD_IO		0x03, 0xc0, 6
+#define RG_TRX_CTRL_1	(0x04)
+#define SR_IRQ_POLARITY		0x04, 0x01, 0
+#define SR_IRQ_MASK_MODE	0x04, 0x02, 1
+#define SR_SPI_CMD_MODE		0x04, 0x0c, 2
+#define SR_RX_BL_CTRL		0x04, 0x10, 4
+#define SR_TX_AUTO_CRC_ON	0x04, 0x20, 5
+#define SR_IRQ_2_EXT_EN		0x04, 0x40, 6
+#define SR_PA_EXT_EN		0x04, 0x80, 7
+#define RG_PHY_TX_PWR	(0x05)
+#define SR_TX_PWR_23X		0x05, 0x0f, 0
+#define SR_PA_LT_230		0x05, 0x30, 4
+#define SR_PA_BUF_LT_230	0x05, 0xc0, 6
+#define SR_TX_PWR_212		0x05, 0x1f, 0
+#define SR_GC_PA_212		0x05, 0x60, 5
+#define SR_PA_BOOST_LT_212	0x05, 0x80, 7
+#define RG_PHY_RSSI	(0x06)
+#define SR_RSSI			0x06, 0x1f, 0
+#define SR_RND_VALUE		0x06, 0x60, 5
+#define SR_RX_CRC_VALID		0x06, 0x80, 7
+#define RG_PHY_ED_LEVEL	(0x07)
+#define SR_ED_LEVEL		0x07, 0xff, 0
+#define RG_PHY_CC_CCA	(0x08)
+#define SR_CHANNEL		0x08, 0x1f, 0
+#define SR_CCA_MODE		0x08, 0x60, 5
+#define SR_CCA_REQUEST		0x08, 0x80, 7
+#define RG_CCA_THRES	(0x09)
+#define SR_CCA_ED_THRES		0x09, 0x0f, 0
+#define SR_RESERVED_09_1	0x09, 0xf0, 4
+#define RG_RX_CTRL	(0x0a)
+#define SR_PDT_THRES		0x0a, 0x0f, 0
+#define SR_RESERVED_0a_1	0x0a, 0xf0, 4
+#define RG_SFD_VALUE	(0x0b)
+#define SR_SFD_VALUE		0x0b, 0xff, 0
+#define RG_TRX_CTRL_2	(0x0c)
+#define SR_OQPSK_DATA_RATE	0x0c, 0x03, 0
+#define SR_SUB_MODE		0x0c, 0x04, 2
+#define SR_BPSK_QPSK		0x0c, 0x08, 3
+#define SR_OQPSK_SUB1_RC_EN	0x0c, 0x10, 4
+#define SR_RESERVED_0c_5	0x0c, 0x60, 5
+#define SR_RX_SAFE_MODE		0x0c, 0x80, 7
+#define RG_ANT_DIV	(0x0d)
+#define SR_ANT_CTRL		0x0d, 0x03, 0
+#define SR_ANT_EXT_SW_EN	0x0d, 0x04, 2
+#define SR_ANT_DIV_EN		0x0d, 0x08, 3
+#define SR_RESERVED_0d_2	0x0d, 0x70, 4
+#define SR_ANT_SEL		0x0d, 0x80, 7
+#define RG_IRQ_MASK	(0x0e)
+#define SR_IRQ_MASK		0x0e, 0xff, 0
+#define RG_IRQ_STATUS	(0x0f)
+#define SR_IRQ_0_PLL_LOCK	0x0f, 0x01, 0
+#define SR_IRQ_1_PLL_UNLOCK	0x0f, 0x02, 1
+#define SR_IRQ_2_RX_START	0x0f, 0x04, 2
+#define SR_IRQ_3_TRX_END	0x0f, 0x08, 3
+#define SR_IRQ_4_CCA_ED_DONE	0x0f, 0x10, 4
+#define SR_IRQ_5_AMI		0x0f, 0x20, 5
+#define SR_IRQ_6_TRX_UR		0x0f, 0x40, 6
+#define SR_IRQ_7_BAT_LOW	0x0f, 0x80, 7
+#define RG_VREG_CTRL	(0x10)
+#define SR_RESERVED_10_6	0x10, 0x03, 0
+#define SR_DVDD_OK		0x10, 0x04, 2
+#define SR_DVREG_EXT		0x10, 0x08, 3
+#define SR_RESERVED_10_3	0x10, 0x30, 4
+#define SR_AVDD_OK		0x10, 0x40, 6
+#define SR_AVREG_EXT		0x10, 0x80, 7
+#define RG_BATMON	(0x11)
+#define SR_BATMON_VTH		0x11, 0x0f, 0
+#define SR_BATMON_HR		0x11, 0x10, 4
+#define SR_BATMON_OK		0x11, 0x20, 5
+#define SR_RESERVED_11_1	0x11, 0xc0, 6
+#define RG_XOSC_CTRL	(0x12)
+#define SR_XTAL_TRIM		0x12, 0x0f, 0
+#define SR_XTAL_MODE		0x12, 0xf0, 4
+#define RG_RX_SYN	(0x15)
+#define SR_RX_PDT_LEVEL		0x15, 0x0f, 0
+#define SR_RESERVED_15_2	0x15, 0x70, 4
+#define SR_RX_PDT_DIS		0x15, 0x80, 7
+#define RG_XAH_CTRL_1	(0x17)
+#define SR_RESERVED_17_8	0x17, 0x01, 0
+#define SR_AACK_PROM_MODE	0x17, 0x02, 1
+#define SR_AACK_ACK_TIME	0x17, 0x04, 2
+#define SR_RESERVED_17_5	0x17, 0x08, 3
+#define SR_AACK_UPLD_RES_FT	0x17, 0x10, 4
+#define SR_AACK_FLTR_RES_FT	0x17, 0x20, 5
+#define SR_CSMA_LBT_MODE	0x17, 0x40, 6
+#define SR_RESERVED_17_1	0x17, 0x80, 7
+#define RG_FTN_CTRL	(0x18)
+#define SR_RESERVED_18_2	0x18, 0x7f, 0
+#define SR_FTN_START		0x18, 0x80, 7
+#define RG_PLL_CF	(0x1a)
+#define SR_RESERVED_1a_2	0x1a, 0x7f, 0
+#define SR_PLL_CF_START		0x1a, 0x80, 7
+#define RG_PLL_DCU	(0x1b)
+#define SR_RESERVED_1b_3	0x1b, 0x3f, 0
+#define SR_RESERVED_1b_2	0x1b, 0x40, 6
+#define SR_PLL_DCU_START	0x1b, 0x80, 7
+#define RG_PART_NUM	(0x1c)
+#define SR_PART_NUM		0x1c, 0xff, 0
+#define RG_VERSION_NUM	(0x1d)
+#define SR_VERSION_NUM		0x1d, 0xff, 0
+#define RG_MAN_ID_0	(0x1e)
+#define SR_MAN_ID_0		0x1e, 0xff, 0
+#define RG_MAN_ID_1	(0x1f)
+#define SR_MAN_ID_1		0x1f, 0xff, 0
+#define RG_SHORT_ADDR_0	(0x20)
+#define SR_SHORT_ADDR_0		0x20, 0xff, 0
+#define RG_SHORT_ADDR_1	(0x21)
+#define SR_SHORT_ADDR_1		0x21, 0xff, 0
+#define RG_PAN_ID_0	(0x22)
+#define SR_PAN_ID_0		0x22, 0xff, 0
+#define RG_PAN_ID_1	(0x23)
+#define SR_PAN_ID_1		0x23, 0xff, 0
+#define RG_IEEE_ADDR_0	(0x24)
+#define SR_IEEE_ADDR_0		0x24, 0xff, 0
+#define RG_IEEE_ADDR_1	(0x25)
+#define SR_IEEE_ADDR_1		0x25, 0xff, 0
+#define RG_IEEE_ADDR_2	(0x26)
+#define SR_IEEE_ADDR_2		0x26, 0xff, 0
+#define RG_IEEE_ADDR_3	(0x27)
+#define SR_IEEE_ADDR_3		0x27, 0xff, 0
+#define RG_IEEE_ADDR_4	(0x28)
+#define SR_IEEE_ADDR_4		0x28, 0xff, 0
+#define RG_IEEE_ADDR_5	(0x29)
+#define SR_IEEE_ADDR_5		0x29, 0xff, 0
+#define RG_IEEE_ADDR_6	(0x2a)
+#define SR_IEEE_ADDR_6		0x2a, 0xff, 0
+#define RG_IEEE_ADDR_7	(0x2b)
+#define SR_IEEE_ADDR_7		0x2b, 0xff, 0
+#define RG_XAH_CTRL_0	(0x2c)
+#define SR_SLOTTED_OPERATION	0x2c, 0x01, 0
+#define SR_MAX_CSMA_RETRIES	0x2c, 0x0e, 1
+#define SR_MAX_FRAME_RETRIES	0x2c, 0xf0, 4
+#define RG_CSMA_SEED_0	(0x2d)
+#define SR_CSMA_SEED_0		0x2d, 0xff, 0
+#define RG_CSMA_SEED_1	(0x2e)
+#define SR_CSMA_SEED_1		0x2e, 0x07, 0
+#define SR_AACK_I_AM_COORD	0x2e, 0x08, 3
+#define SR_AACK_DIS_ACK		0x2e, 0x10, 4
+#define SR_AACK_SET_PD		0x2e, 0x20, 5
+#define SR_AACK_FVN_MODE	0x2e, 0xc0, 6
+#define RG_CSMA_BE	(0x2f)
+#define SR_MIN_BE		0x2f, 0x0f, 0
+#define SR_MAX_BE		0x2f, 0xf0, 4
+
+#define CMD_REG		0x80
+#define CMD_REG_MASK	0x3f
+#define CMD_WRITE	0x40
+#define CMD_FB		0x20
+
+#define IRQ_BAT_LOW	BIT(7)
+#define IRQ_TRX_UR	BIT(6)
+#define IRQ_AMI		BIT(5)
+#define IRQ_CCA_ED	BIT(4)
+#define IRQ_TRX_END	BIT(3)
+#define IRQ_RX_START	BIT(2)
+#define IRQ_PLL_UNL	BIT(1)
+#define IRQ_PLL_LOCK	BIT(0)
+
+#define IRQ_ACTIVE_HIGH	0
+#define IRQ_ACTIVE_LOW	1
+
+#define STATE_P_ON		0x00	/* BUSY */
+#define STATE_BUSY_RX		0x01
+#define STATE_BUSY_TX		0x02
+#define STATE_FORCE_TRX_OFF	0x03
+#define STATE_FORCE_TX_ON	0x04	/* IDLE */
+/* 0x05 */				/* INVALID_PARAMETER */
+#define STATE_RX_ON		0x06
+/* 0x07 */				/* SUCCESS */
+#define STATE_TRX_OFF		0x08
+#define STATE_TX_ON		0x09
+/* 0x0a - 0x0e */			/* 0x0a - UNSUPPORTED_ATTRIBUTE */
+#define STATE_SLEEP		0x0F
+#define STATE_PREP_DEEP_SLEEP	0x10
+#define STATE_BUSY_RX_AACK	0x11
+#define STATE_BUSY_TX_ARET	0x12
+#define STATE_RX_AACK_ON	0x16
+#define STATE_TX_ARET_ON	0x19
+#define STATE_RX_ON_NOCLK	0x1C
+#define STATE_RX_AACK_ON_NOCLK	0x1D
+#define STATE_BUSY_RX_AACK_NOCLK 0x1E
+#define STATE_TRANSITION_IN_PROGRESS 0x1F
+
+#define TRX_STATE_MASK		(0x1F)
+#define TRAC_MASK(x)		((x & 0xe0) >> 5)
+
+#define TRAC_SUCCESS			0
+#define TRAC_SUCCESS_DATA_PENDING	1
+#define TRAC_SUCCESS_WAIT_FOR_ACK	2
+#define TRAC_CHANNEL_ACCESS_FAILURE	3
+#define TRAC_NO_ACK			5
+#define TRAC_INVALID			7
+
+#endif /* !_AT86RF230_H */
diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
new file mode 100644
index 000000000..2c3387838
--- /dev/null
+++ b/drivers/net/ieee802154/atusb.c
@@ -0,0 +1,1093 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * atusb.c - Driver for the ATUSB IEEE 802.15.4 dongle
+ *
+ * Written 2013 by Werner Almesberger <werner@almesberger.net>
+ *
+ * Copyright (c) 2015 - 2016 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ * Based on at86rf230.c and spi_atusb.c.
+ * at86rf230.c is
+ * Copyright (C) 2009 Siemens AG
+ * Written by: Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com>
+ *
+ * spi_atusb.c is
+ * Copyright (c) 2011 Richard Sharpe <realrichardsharpe@gmail.com>
+ * Copyright (c) 2011 Stefan Schmidt <stefan@datenfreihafen.org>
+ * Copyright (c) 2011 Werner Almesberger <werner@almesberger.net>
+ *
+ * USB initialization is
+ * Copyright (c) 2013 Alexander Aring <alex.aring@gmail.com>
+ *
+ * Busware HUL support is
+ * Copyright (c) 2017 Josef Filzmaier <j.filzmaier@gmx.at>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/usb.h>
+#include <linux/skbuff.h>
+
+#include <net/cfg802154.h>
+#include <net/mac802154.h>
+
+#include "at86rf230.h"
+#include "atusb.h"
+
+#define ATUSB_JEDEC_ATMEL	0x1f	/* JEDEC manufacturer ID */
+
+#define ATUSB_NUM_RX_URBS	4	/* allow for a bit of local latency */
+#define ATUSB_ALLOC_DELAY_MS	100	/* delay after failed allocation */
+#define ATUSB_TX_TIMEOUT_MS	200	/* on the air timeout */
+
+struct atusb {
+	struct ieee802154_hw *hw;
+	struct usb_device *usb_dev;
+	struct atusb_chip_data *data;
+	int shutdown;			/* non-zero if shutting down */
+	int err;			/* set by first error */
+
+	/* RX variables */
+	struct delayed_work work;	/* memory allocations */
+	struct usb_anchor idle_urbs;	/* URBs waiting to be submitted */
+	struct usb_anchor rx_urbs;	/* URBs waiting for reception */
+
+	/* TX variables */
+	struct usb_ctrlrequest tx_dr;
+	struct urb *tx_urb;
+	struct sk_buff *tx_skb;
+	u8 tx_ack_seq;		/* current TX ACK sequence number */
+
+	/* Firmware variable */
+	unsigned char fw_ver_maj;	/* Firmware major version number */
+	unsigned char fw_ver_min;	/* Firmware minor version number */
+	unsigned char fw_hw_type;	/* Firmware hardware type */
+};
+
+struct atusb_chip_data {
+	u16 t_channel_switch;
+	int rssi_base_val;
+
+	int (*set_channel)(struct ieee802154_hw*, u8, u8);
+	int (*set_txpower)(struct ieee802154_hw*, s32);
+};
+
+static int atusb_write_subreg(struct atusb *atusb, u8 reg, u8 mask,
+			      u8 shift, u8 value)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	u8 orig, tmp;
+	int ret = 0;
+
+	dev_dbg(&usb_dev->dev, "%s: 0x%02x <- 0x%02x\n", __func__, reg, value);
+
+	ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				   0, reg, &orig, 1, 1000, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	/* Write the value only into that part of the register which is allowed
+	 * by the mask. All other bits stay as before.
+	 */
+	tmp = orig & ~mask;
+	tmp |= (value << shift) & mask;
+
+	if (tmp != orig)
+		ret = usb_control_msg_send(usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+					   tmp, reg, NULL, 0, 1000, GFP_KERNEL);
+
+	return ret;
+}
+
+static int atusb_read_subreg(struct atusb *lp,
+			     unsigned int addr, unsigned int mask,
+			     unsigned int shift)
+{
+	int reg, ret;
+
+	ret = usb_control_msg_recv(lp->usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				   0, addr, &reg, 1, 1000, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	reg = (reg & mask) >> shift;
+
+	return reg;
+}
+
+static int atusb_get_and_clear_error(struct atusb *atusb)
+{
+	int err = atusb->err;
+
+	atusb->err = 0;
+	return err;
+}
+
+/* ----- skb allocation ---------------------------------------------------- */
+
+#define MAX_PSDU	127
+#define MAX_RX_XFER	(1 + MAX_PSDU + 2 + 1)	/* PHR+PSDU+CRC+LQI */
+
+#define SKB_ATUSB(skb)	(*(struct atusb **)(skb)->cb)
+
+static void atusb_in(struct urb *urb);
+
+static int atusb_submit_rx_urb(struct atusb *atusb, struct urb *urb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	struct sk_buff *skb = urb->context;
+	int ret;
+
+	if (!skb) {
+		skb = alloc_skb(MAX_RX_XFER, GFP_KERNEL);
+		if (!skb) {
+			dev_warn_ratelimited(&usb_dev->dev,
+					     "atusb_in: can't allocate skb\n");
+			return -ENOMEM;
+		}
+		skb_put(skb, MAX_RX_XFER);
+		SKB_ATUSB(skb) = atusb;
+	}
+
+	usb_fill_bulk_urb(urb, usb_dev, usb_rcvbulkpipe(usb_dev, 1),
+			  skb->data, MAX_RX_XFER, atusb_in, skb);
+	usb_anchor_urb(urb, &atusb->rx_urbs);
+
+	ret = usb_submit_urb(urb, GFP_KERNEL);
+	if (ret) {
+		usb_unanchor_urb(urb);
+		kfree_skb(skb);
+		urb->context = NULL;
+	}
+	return ret;
+}
+
+static void atusb_work_urbs(struct work_struct *work)
+{
+	struct atusb *atusb =
+	    container_of(to_delayed_work(work), struct atusb, work);
+	struct usb_device *usb_dev = atusb->usb_dev;
+	struct urb *urb;
+	int ret;
+
+	if (atusb->shutdown)
+		return;
+
+	do {
+		urb = usb_get_from_anchor(&atusb->idle_urbs);
+		if (!urb)
+			return;
+		ret = atusb_submit_rx_urb(atusb, urb);
+	} while (!ret);
+
+	usb_anchor_urb(urb, &atusb->idle_urbs);
+	dev_warn_ratelimited(&usb_dev->dev,
+			     "atusb_in: can't allocate/submit URB (%d)\n", ret);
+	schedule_delayed_work(&atusb->work,
+			      msecs_to_jiffies(ATUSB_ALLOC_DELAY_MS) + 1);
+}
+
+/* ----- Asynchronous USB -------------------------------------------------- */
+
+static void atusb_tx_done(struct atusb *atusb, u8 seq)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	u8 expect = atusb->tx_ack_seq;
+
+	dev_dbg(&usb_dev->dev, "%s (0x%02x/0x%02x)\n", __func__, seq, expect);
+	if (seq == expect) {
+		/* TODO check for ifs handling in firmware */
+		ieee802154_xmit_complete(atusb->hw, atusb->tx_skb, false);
+	} else {
+		/* TODO I experience this case when atusb has a tx complete
+		 * irq before probing, we should fix the firmware it's an
+		 * unlikely case now that seq == expect is then true, but can
+		 * happen and fail with a tx_skb = NULL;
+		 */
+		ieee802154_xmit_hw_error(atusb->hw, atusb->tx_skb);
+	}
+}
+
+static void atusb_in_good(struct urb *urb)
+{
+	struct usb_device *usb_dev = urb->dev;
+	struct sk_buff *skb = urb->context;
+	struct atusb *atusb = SKB_ATUSB(skb);
+	u8 len, lqi;
+
+	if (!urb->actual_length) {
+		dev_dbg(&usb_dev->dev, "atusb_in: zero-sized URB ?\n");
+		return;
+	}
+
+	len = *skb->data;
+
+	if (urb->actual_length == 1) {
+		atusb_tx_done(atusb, len);
+		return;
+	}
+
+	if (len + 1 > urb->actual_length - 1) {
+		dev_dbg(&usb_dev->dev, "atusb_in: frame len %d+1 > URB %u-1\n",
+			len, urb->actual_length);
+		return;
+	}
+
+	if (!ieee802154_is_valid_psdu_len(len)) {
+		dev_dbg(&usb_dev->dev, "atusb_in: frame corrupted\n");
+		return;
+	}
+
+	lqi = skb->data[len + 1];
+	dev_dbg(&usb_dev->dev, "atusb_in: rx len %d lqi 0x%02x\n", len, lqi);
+	skb_pull(skb, 1);	/* remove PHR */
+	skb_trim(skb, len);	/* get payload only */
+	ieee802154_rx_irqsafe(atusb->hw, skb, lqi);
+	urb->context = NULL;	/* skb is gone */
+}
+
+static void atusb_in(struct urb *urb)
+{
+	struct usb_device *usb_dev = urb->dev;
+	struct sk_buff *skb = urb->context;
+	struct atusb *atusb = SKB_ATUSB(skb);
+
+	dev_dbg(&usb_dev->dev, "%s: status %d len %d\n", __func__,
+		urb->status, urb->actual_length);
+	if (urb->status) {
+		if (urb->status == -ENOENT) { /* being killed */
+			kfree_skb(skb);
+			urb->context = NULL;
+			return;
+		}
+		dev_dbg(&usb_dev->dev, "%s: URB error %d\n", __func__, urb->status);
+	} else {
+		atusb_in_good(urb);
+	}
+
+	usb_anchor_urb(urb, &atusb->idle_urbs);
+	if (!atusb->shutdown)
+		schedule_delayed_work(&atusb->work, 0);
+}
+
+/* ----- URB allocation/deallocation --------------------------------------- */
+
+static void atusb_free_urbs(struct atusb *atusb)
+{
+	struct urb *urb;
+
+	while (1) {
+		urb = usb_get_from_anchor(&atusb->idle_urbs);
+		if (!urb)
+			break;
+		kfree_skb(urb->context);
+		usb_free_urb(urb);
+	}
+}
+
+static int atusb_alloc_urbs(struct atusb *atusb, int n)
+{
+	struct urb *urb;
+
+	while (n) {
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			atusb_free_urbs(atusb);
+			return -ENOMEM;
+		}
+		usb_anchor_urb(urb, &atusb->idle_urbs);
+		usb_free_urb(urb);
+		n--;
+	}
+	return 0;
+}
+
+/* ----- IEEE 802.15.4 interface operations -------------------------------- */
+
+static void atusb_xmit_complete(struct urb *urb)
+{
+	dev_dbg(&urb->dev->dev, "atusb_xmit urb completed");
+}
+
+static int atusb_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct atusb *atusb = hw->priv;
+	struct usb_device *usb_dev = atusb->usb_dev;
+	int ret;
+
+	dev_dbg(&usb_dev->dev, "%s (%d)\n", __func__, skb->len);
+	atusb->tx_skb = skb;
+	atusb->tx_ack_seq++;
+	atusb->tx_dr.wIndex = cpu_to_le16(atusb->tx_ack_seq);
+	atusb->tx_dr.wLength = cpu_to_le16(skb->len);
+
+	usb_fill_control_urb(atusb->tx_urb, usb_dev,
+			     usb_sndctrlpipe(usb_dev, 0),
+			     (unsigned char *)&atusb->tx_dr, skb->data,
+			     skb->len, atusb_xmit_complete, NULL);
+	ret = usb_submit_urb(atusb->tx_urb, GFP_ATOMIC);
+	dev_dbg(&usb_dev->dev, "%s done (%d)\n", __func__, ret);
+	return ret;
+}
+
+static int atusb_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	WARN_ON(!level);
+	*level = 0xbe;
+	return 0;
+}
+
+static int atusb_set_hw_addr_filt(struct ieee802154_hw *hw,
+				  struct ieee802154_hw_addr_filt *filt,
+				  unsigned long changed)
+{
+	struct atusb *atusb = hw->priv;
+	struct device *dev = &atusb->usb_dev->dev;
+
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		u16 addr = le16_to_cpu(filt->short_addr);
+
+		dev_vdbg(dev, "%s called for saddr\n", __func__);
+		usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+				     addr, RG_SHORT_ADDR_0, NULL, 0, 1000, GFP_KERNEL);
+
+		usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+				     addr >> 8, RG_SHORT_ADDR_1, NULL, 0, 1000, GFP_KERNEL);
+	}
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		u16 pan = le16_to_cpu(filt->pan_id);
+
+		dev_vdbg(dev, "%s called for pan id\n", __func__);
+		usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+				     pan, RG_PAN_ID_0, NULL, 0, 1000, GFP_KERNEL);
+
+		usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+				     pan >> 8, RG_PAN_ID_1, NULL, 0, 1000, GFP_KERNEL);
+	}
+
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		u8 i, addr[IEEE802154_EXTENDED_ADDR_LEN];
+
+		memcpy(addr, &filt->ieee_addr, IEEE802154_EXTENDED_ADDR_LEN);
+		dev_vdbg(dev, "%s called for IEEE addr\n", __func__);
+		for (i = 0; i < 8; i++)
+			usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+					     addr[i], RG_IEEE_ADDR_0 + i, NULL, 0,
+					     1000, GFP_KERNEL);
+	}
+
+	if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+		dev_vdbg(dev, "%s called for panc change\n", __func__);
+		if (filt->pan_coord)
+			atusb_write_subreg(atusb, SR_AACK_I_AM_COORD, 1);
+		else
+			atusb_write_subreg(atusb, SR_AACK_I_AM_COORD, 0);
+	}
+
+	return atusb_get_and_clear_error(atusb);
+}
+
+static int atusb_start(struct ieee802154_hw *hw)
+{
+	struct atusb *atusb = hw->priv;
+	struct usb_device *usb_dev = atusb->usb_dev;
+	int ret;
+
+	dev_dbg(&usb_dev->dev, "%s\n", __func__);
+	schedule_delayed_work(&atusb->work, 0);
+	usb_control_msg_send(atusb->usb_dev, 0, ATUSB_RX_MODE, ATUSB_REQ_TO_DEV, 1, 0,
+			     NULL, 0, 1000, GFP_KERNEL);
+	ret = atusb_get_and_clear_error(atusb);
+	if (ret < 0)
+		usb_kill_anchored_urbs(&atusb->idle_urbs);
+	return ret;
+}
+
+static void atusb_stop(struct ieee802154_hw *hw)
+{
+	struct atusb *atusb = hw->priv;
+	struct usb_device *usb_dev = atusb->usb_dev;
+
+	dev_dbg(&usb_dev->dev, "%s\n", __func__);
+	usb_kill_anchored_urbs(&atusb->idle_urbs);
+	usb_control_msg_send(atusb->usb_dev, 0, ATUSB_RX_MODE, ATUSB_REQ_TO_DEV, 0, 0,
+			     NULL, 0, 1000, GFP_KERNEL);
+	atusb_get_and_clear_error(atusb);
+}
+
+#define ATUSB_MAX_TX_POWERS 0xF
+static const s32 atusb_powers[ATUSB_MAX_TX_POWERS + 1] = {
+	300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700,
+	-900, -1200, -1700,
+};
+
+static int
+atusb_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct atusb *atusb = hw->priv;
+
+	if (atusb->data)
+		return atusb->data->set_txpower(hw, mbm);
+	else
+		return -ENOTSUPP;
+}
+
+static int
+atusb_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct atusb *atusb = hw->priv;
+	u32 i;
+
+	for (i = 0; i < hw->phy->supported.tx_powers_size; i++) {
+		if (hw->phy->supported.tx_powers[i] == mbm)
+			return atusb_write_subreg(atusb, SR_TX_PWR_23X, i);
+	}
+
+	return -EINVAL;
+}
+
+static int
+hulusb_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	u32 i;
+
+	for (i = 0; i < hw->phy->supported.tx_powers_size; i++) {
+		if (hw->phy->supported.tx_powers[i] == mbm)
+			return atusb_write_subreg(hw->priv, SR_TX_PWR_212, i);
+	}
+
+	return -EINVAL;
+}
+
+#define ATUSB_MAX_ED_LEVELS 0xF
+static const s32 atusb_ed_levels[ATUSB_MAX_ED_LEVELS + 1] = {
+	-9100, -8900, -8700, -8500, -8300, -8100, -7900, -7700, -7500, -7300,
+	-7100, -6900, -6700, -6500, -6300, -6100,
+};
+
+#define AT86RF212_MAX_TX_POWERS 0x1F
+static const s32 at86rf212_powers[AT86RF212_MAX_TX_POWERS + 1] = {
+	500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700,
+	-800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700,
+	-1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600,
+};
+
+#define AT86RF2XX_MAX_ED_LEVELS 0xF
+static const s32 at86rf212_ed_levels_100[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-10000, -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200,
+	-8000, -7800, -7600, -7400, -7200, -7000,
+};
+
+static const s32 at86rf212_ed_levels_98[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000,
+	-7800, -7600, -7400, -7200, -7000, -6800,
+};
+
+static int
+atusb_set_cca_mode(struct ieee802154_hw *hw, const struct wpan_phy_cca *cca)
+{
+	struct atusb *atusb = hw->priv;
+	u8 val;
+
+	/* mapping 802.15.4 to driver spec */
+	switch (cca->mode) {
+	case NL802154_CCA_ENERGY:
+		val = 1;
+		break;
+	case NL802154_CCA_CARRIER:
+		val = 2;
+		break;
+	case NL802154_CCA_ENERGY_CARRIER:
+		switch (cca->opt) {
+		case NL802154_CCA_OPT_ENERGY_CARRIER_AND:
+			val = 3;
+			break;
+		case NL802154_CCA_OPT_ENERGY_CARRIER_OR:
+			val = 0;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return atusb_write_subreg(atusb, SR_CCA_MODE, val);
+}
+
+static int hulusb_set_cca_ed_level(struct atusb *lp, int rssi_base_val)
+{
+	int cca_ed_thres;
+
+	cca_ed_thres = atusb_read_subreg(lp, SR_CCA_ED_THRES);
+	if (cca_ed_thres < 0)
+		return cca_ed_thres;
+
+	switch (rssi_base_val) {
+	case -98:
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_98;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_98);
+		lp->hw->phy->cca_ed_level = at86rf212_ed_levels_98[cca_ed_thres];
+		break;
+	case -100:
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
+		lp->hw->phy->cca_ed_level = at86rf212_ed_levels_100[cca_ed_thres];
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	return 0;
+}
+
+static int
+atusb_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct atusb *atusb = hw->priv;
+	u32 i;
+
+	for (i = 0; i < hw->phy->supported.cca_ed_levels_size; i++) {
+		if (hw->phy->supported.cca_ed_levels[i] == mbm)
+			return atusb_write_subreg(atusb, SR_CCA_ED_THRES, i);
+	}
+
+	return -EINVAL;
+}
+
+static int atusb_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct atusb *atusb = hw->priv;
+	int ret = -ENOTSUPP;
+
+	if (atusb->data) {
+		ret = atusb->data->set_channel(hw, page, channel);
+		/* @@@ ugly synchronization */
+		msleep(atusb->data->t_channel_switch);
+	}
+
+	return ret;
+}
+
+static int atusb_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct atusb *atusb = hw->priv;
+	int ret;
+
+	ret = atusb_write_subreg(atusb, SR_CHANNEL, channel);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int hulusb_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	int rc;
+	int rssi_base_val;
+
+	struct atusb *lp = hw->priv;
+
+	if (channel == 0)
+		rc = atusb_write_subreg(lp, SR_SUB_MODE, 0);
+	else
+		rc = atusb_write_subreg(lp, SR_SUB_MODE, 1);
+	if (rc < 0)
+		return rc;
+
+	if (page == 0) {
+		rc = atusb_write_subreg(lp, SR_BPSK_QPSK, 0);
+		rssi_base_val = -100;
+	} else {
+		rc = atusb_write_subreg(lp, SR_BPSK_QPSK, 1);
+		rssi_base_val = -98;
+	}
+	if (rc < 0)
+		return rc;
+
+	rc = hulusb_set_cca_ed_level(lp, rssi_base_val);
+	if (rc < 0)
+		return rc;
+
+	return atusb_write_subreg(lp, SR_CHANNEL, channel);
+}
+
+static int
+atusb_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, u8 retries)
+{
+	struct atusb *atusb = hw->priv;
+	int ret;
+
+	ret = atusb_write_subreg(atusb, SR_MIN_BE, min_be);
+	if (ret)
+		return ret;
+
+	ret = atusb_write_subreg(atusb, SR_MAX_BE, max_be);
+	if (ret)
+		return ret;
+
+	return atusb_write_subreg(atusb, SR_MAX_CSMA_RETRIES, retries);
+}
+
+static int
+hulusb_set_lbt(struct ieee802154_hw *hw, bool on)
+{
+	struct atusb *atusb = hw->priv;
+
+	return atusb_write_subreg(atusb, SR_CSMA_LBT_MODE, on);
+}
+
+static int
+atusb_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
+{
+	struct atusb *atusb = hw->priv;
+
+	return atusb_write_subreg(atusb, SR_MAX_FRAME_RETRIES, retries);
+}
+
+static int
+atusb_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
+{
+	struct atusb *atusb = hw->priv;
+	int ret;
+
+	if (on) {
+		ret = atusb_write_subreg(atusb, SR_AACK_DIS_ACK, 1);
+		if (ret < 0)
+			return ret;
+
+		ret = atusb_write_subreg(atusb, SR_AACK_PROM_MODE, 1);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = atusb_write_subreg(atusb, SR_AACK_PROM_MODE, 0);
+		if (ret < 0)
+			return ret;
+
+		ret = atusb_write_subreg(atusb, SR_AACK_DIS_ACK, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static struct atusb_chip_data atusb_chip_data = {
+	.t_channel_switch = 1,
+	.rssi_base_val = -91,
+	.set_txpower = atusb_set_txpower,
+	.set_channel = atusb_set_channel,
+};
+
+static struct atusb_chip_data hulusb_chip_data = {
+	.t_channel_switch = 11,
+	.rssi_base_val = -100,
+	.set_txpower = hulusb_set_txpower,
+	.set_channel = hulusb_set_channel,
+};
+
+static const struct ieee802154_ops atusb_ops = {
+	.owner			= THIS_MODULE,
+	.xmit_async		= atusb_xmit,
+	.ed			= atusb_ed,
+	.set_channel		= atusb_channel,
+	.start			= atusb_start,
+	.stop			= atusb_stop,
+	.set_hw_addr_filt	= atusb_set_hw_addr_filt,
+	.set_txpower		= atusb_txpower,
+	.set_lbt		= hulusb_set_lbt,
+	.set_cca_mode		= atusb_set_cca_mode,
+	.set_cca_ed_level	= atusb_set_cca_ed_level,
+	.set_csma_params	= atusb_set_csma_params,
+	.set_frame_retries	= atusb_set_frame_retries,
+	.set_promiscuous_mode	= atusb_set_promiscuous_mode,
+};
+
+/* ----- Firmware and chip version information ----------------------------- */
+
+static int atusb_get_and_show_revision(struct atusb *atusb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	char *hw_name;
+	unsigned char buffer[3];
+	int ret;
+
+	/* Get a couple of the ATMega Firmware values */
+	ret = usb_control_msg_recv(atusb->usb_dev, 0, ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0,
+				   buffer, 3, 1000, GFP_KERNEL);
+	if (!ret) {
+		atusb->fw_ver_maj = buffer[0];
+		atusb->fw_ver_min = buffer[1];
+		atusb->fw_hw_type = buffer[2];
+
+		switch (atusb->fw_hw_type) {
+		case ATUSB_HW_TYPE_100813:
+		case ATUSB_HW_TYPE_101216:
+		case ATUSB_HW_TYPE_110131:
+			hw_name = "ATUSB";
+			atusb->data = &atusb_chip_data;
+			break;
+		case ATUSB_HW_TYPE_RZUSB:
+			hw_name = "RZUSB";
+			atusb->data = &atusb_chip_data;
+			break;
+		case ATUSB_HW_TYPE_HULUSB:
+			hw_name = "HULUSB";
+			atusb->data = &hulusb_chip_data;
+			break;
+		default:
+			hw_name = "UNKNOWN";
+			atusb->err = -ENOTSUPP;
+			ret = -ENOTSUPP;
+			break;
+		}
+
+		dev_info(&usb_dev->dev,
+			 "Firmware: major: %u, minor: %u, hardware type: %s (%d)\n",
+			 atusb->fw_ver_maj, atusb->fw_ver_min, hw_name,
+			 atusb->fw_hw_type);
+	}
+	if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 2) {
+		dev_info(&usb_dev->dev,
+			 "Firmware version (%u.%u) predates our first public release.",
+			 atusb->fw_ver_maj, atusb->fw_ver_min);
+		dev_info(&usb_dev->dev, "Please update to version 0.2 or newer");
+	}
+
+	return ret;
+}
+
+static int atusb_get_and_show_build(struct atusb *atusb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	char *build;
+	int ret;
+
+	build = kmalloc(ATUSB_BUILD_SIZE + 1, GFP_KERNEL);
+	if (!build)
+		return -ENOMEM;
+
+	ret = usb_control_msg(atusb->usb_dev, usb_rcvctrlpipe(usb_dev, 0), ATUSB_BUILD,
+			      ATUSB_REQ_FROM_DEV, 0, 0, build, ATUSB_BUILD_SIZE, 1000);
+	if (ret >= 0) {
+		build[ret] = 0;
+		dev_info(&usb_dev->dev, "Firmware: build %s\n", build);
+	}
+
+	kfree(build);
+	return ret;
+}
+
+static int atusb_get_and_conf_chip(struct atusb *atusb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	u8 man_id_0, man_id_1, part_num, version_num;
+	const char *chip;
+	struct ieee802154_hw *hw = atusb->hw;
+	int ret;
+
+	ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				   0, RG_MAN_ID_0, &man_id_0, 1, 1000, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				   0, RG_MAN_ID_1, &man_id_1, 1, 1000, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				   0, RG_PART_NUM, &part_num, 1, 1000, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	ret = usb_control_msg_recv(usb_dev, 0, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				   0, RG_VERSION_NUM, &version_num, 1, 1000, GFP_KERNEL);
+	if (ret < 0)
+		return ret;
+
+	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
+		    IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS;
+
+	hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL |
+			 WPAN_PHY_FLAG_CCA_MODE;
+
+	hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+				       BIT(NL802154_CCA_CARRIER) |
+				       BIT(NL802154_CCA_ENERGY_CARRIER);
+	hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
+				      BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
+
+	hw->phy->cca.mode = NL802154_CCA_ENERGY;
+
+	hw->phy->current_page = 0;
+
+	if ((man_id_1 << 8 | man_id_0) != ATUSB_JEDEC_ATMEL) {
+		dev_err(&usb_dev->dev,
+			"non-Atmel transceiver xxxx%02x%02x\n",
+			man_id_1, man_id_0);
+		goto fail;
+	}
+
+	switch (part_num) {
+	case 2:
+		chip = "AT86RF230";
+		atusb->hw->phy->supported.channels[0] = 0x7FFF800;
+		atusb->hw->phy->current_channel = 11;	/* reset default */
+		atusb->hw->phy->supported.tx_powers = atusb_powers;
+		atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
+		hw->phy->supported.cca_ed_levels = atusb_ed_levels;
+		hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(atusb_ed_levels);
+		break;
+	case 3:
+		chip = "AT86RF231";
+		atusb->hw->phy->supported.channels[0] = 0x7FFF800;
+		atusb->hw->phy->current_channel = 11;	/* reset default */
+		atusb->hw->phy->supported.tx_powers = atusb_powers;
+		atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
+		hw->phy->supported.cca_ed_levels = atusb_ed_levels;
+		hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(atusb_ed_levels);
+		break;
+	case 7:
+		chip = "AT86RF212";
+		atusb->hw->flags |= IEEE802154_HW_LBT;
+		atusb->hw->phy->supported.channels[0] = 0x00007FF;
+		atusb->hw->phy->supported.channels[2] = 0x00007FF;
+		atusb->hw->phy->current_channel = 5;
+		atusb->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH;
+		atusb->hw->phy->supported.tx_powers = at86rf212_powers;
+		atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers);
+		atusb->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
+		atusb->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
+		break;
+	default:
+		dev_err(&usb_dev->dev,
+			"unexpected transceiver, part 0x%02x version 0x%02x\n",
+			part_num, version_num);
+		goto fail;
+	}
+
+	hw->phy->transmit_power = hw->phy->supported.tx_powers[0];
+	hw->phy->cca_ed_level = hw->phy->supported.cca_ed_levels[7];
+
+	dev_info(&usb_dev->dev, "ATUSB: %s version %d\n", chip, version_num);
+
+	return 0;
+
+fail:
+	atusb->err = -ENODEV;
+	return -ENODEV;
+}
+
+static int atusb_set_extended_addr(struct atusb *atusb)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	unsigned char buffer[IEEE802154_EXTENDED_ADDR_LEN];
+	__le64 extended_addr;
+	u64 addr;
+	int ret;
+
+	/* Firmware versions before 0.3 do not support the EUI64_READ command.
+	 * Just use a random address and be done.
+	 */
+	if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 3) {
+		ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
+		return 0;
+	}
+
+	/* Firmware is new enough so we fetch the address from EEPROM */
+	ret = usb_control_msg_recv(atusb->usb_dev, 0, ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0,
+				   buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000, GFP_KERNEL);
+	if (ret < 0) {
+		dev_err(&usb_dev->dev, "failed to fetch extended address, random address set\n");
+		ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
+		return ret;
+	}
+
+	memcpy(&extended_addr, buffer, IEEE802154_EXTENDED_ADDR_LEN);
+	/* Check if read address is not empty and the unicast bit is set correctly */
+	if (!ieee802154_is_valid_extended_unicast_addr(extended_addr)) {
+		dev_info(&usb_dev->dev, "no permanent extended address found, random address set\n");
+		ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
+	} else {
+		atusb->hw->phy->perm_extended_addr = extended_addr;
+		addr = swab64((__force u64)atusb->hw->phy->perm_extended_addr);
+		dev_info(&usb_dev->dev, "Read permanent extended address %8phC from device\n",
+			 &addr);
+	}
+
+	return ret;
+}
+
+/* ----- Setup ------------------------------------------------------------- */
+
+static int atusb_probe(struct usb_interface *interface,
+		       const struct usb_device_id *id)
+{
+	struct usb_device *usb_dev = interface_to_usbdev(interface);
+	struct ieee802154_hw *hw;
+	struct atusb *atusb = NULL;
+	int ret = -ENOMEM;
+
+	hw = ieee802154_alloc_hw(sizeof(struct atusb), &atusb_ops);
+	if (!hw)
+		return -ENOMEM;
+
+	atusb = hw->priv;
+	atusb->hw = hw;
+	atusb->usb_dev = usb_get_dev(usb_dev);
+	usb_set_intfdata(interface, atusb);
+
+	atusb->shutdown = 0;
+	atusb->err = 0;
+	INIT_DELAYED_WORK(&atusb->work, atusb_work_urbs);
+	init_usb_anchor(&atusb->idle_urbs);
+	init_usb_anchor(&atusb->rx_urbs);
+
+	if (atusb_alloc_urbs(atusb, ATUSB_NUM_RX_URBS))
+		goto fail;
+
+	atusb->tx_dr.bRequestType = ATUSB_REQ_TO_DEV;
+	atusb->tx_dr.bRequest = ATUSB_TX;
+	atusb->tx_dr.wValue = cpu_to_le16(0);
+
+	atusb->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!atusb->tx_urb)
+		goto fail;
+
+	hw->parent = &usb_dev->dev;
+
+	usb_control_msg_send(atusb->usb_dev, 0, ATUSB_RF_RESET, ATUSB_REQ_TO_DEV, 0, 0,
+			     NULL, 0, 1000, GFP_KERNEL);
+	atusb_get_and_conf_chip(atusb);
+	atusb_get_and_show_revision(atusb);
+	atusb_get_and_show_build(atusb);
+	atusb_set_extended_addr(atusb);
+
+	if ((atusb->fw_ver_maj == 0 && atusb->fw_ver_min >= 3) || atusb->fw_ver_maj > 0)
+		hw->flags |= IEEE802154_HW_FRAME_RETRIES;
+
+	ret = atusb_get_and_clear_error(atusb);
+	if (ret) {
+		dev_err(&atusb->usb_dev->dev,
+			"%s: initialization failed, error = %d\n",
+			__func__, ret);
+		goto fail;
+	}
+
+	ret = ieee802154_register_hw(hw);
+	if (ret)
+		goto fail;
+
+	/* If we just powered on, we're now in P_ON and need to enter TRX_OFF
+	 * explicitly. Any resets after that will send us straight to TRX_OFF,
+	 * making the command below redundant.
+	 */
+	usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+			     STATE_FORCE_TRX_OFF, RG_TRX_STATE, NULL, 0, 1000, GFP_KERNEL);
+
+	msleep(1);	/* reset => TRX_OFF, tTR13 = 37 us */
+
+#if 0
+	/* Calculating the maximum time available to empty the frame buffer
+	 * on reception:
+	 *
+	 * According to [1], the inter-frame gap is
+	 * R * 20 * 16 us + 128 us
+	 * where R is a random number from 0 to 7. Furthermore, we have 20 bit
+	 * times (80 us at 250 kbps) of SHR of the next frame before the
+	 * transceiver begins storing data in the frame buffer.
+	 *
+	 * This yields a minimum time of 208 us between the last data of a
+	 * frame and the first data of the next frame. This time is further
+	 * reduced by interrupt latency in the atusb firmware.
+	 *
+	 * atusb currently needs about 500 us to retrieve a maximum-sized
+	 * frame. We therefore have to allow reception of a new frame to begin
+	 * while we retrieve the previous frame.
+	 *
+	 * [1] "JN-AN-1035 Calculating data rates in an IEEE 802.15.4-based
+	 *      network", Jennic 2006.
+	 *     http://www.jennic.com/download_file.php?supportFile=JN-AN-1035%20Calculating%20802-15-4%20Data%20Rates-1v0.pdf
+	 */
+
+	atusb_write_subreg(atusb, SR_RX_SAFE_MODE, 1);
+#endif
+	usb_control_msg_send(atusb->usb_dev, 0, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+			     0xff, RG_IRQ_MASK, NULL, 0, 1000, GFP_KERNEL);
+
+	ret = atusb_get_and_clear_error(atusb);
+	if (!ret)
+		return 0;
+
+	dev_err(&atusb->usb_dev->dev,
+		"%s: setup failed, error = %d\n",
+		__func__, ret);
+
+	ieee802154_unregister_hw(hw);
+fail:
+	atusb_free_urbs(atusb);
+	usb_kill_urb(atusb->tx_urb);
+	usb_free_urb(atusb->tx_urb);
+	usb_put_dev(usb_dev);
+	ieee802154_free_hw(hw);
+	return ret;
+}
+
+static void atusb_disconnect(struct usb_interface *interface)
+{
+	struct atusb *atusb = usb_get_intfdata(interface);
+
+	dev_dbg(&atusb->usb_dev->dev, "%s\n", __func__);
+
+	atusb->shutdown = 1;
+	cancel_delayed_work_sync(&atusb->work);
+
+	usb_kill_anchored_urbs(&atusb->rx_urbs);
+	atusb_free_urbs(atusb);
+	usb_kill_urb(atusb->tx_urb);
+	usb_free_urb(atusb->tx_urb);
+
+	ieee802154_unregister_hw(atusb->hw);
+
+	usb_put_dev(atusb->usb_dev);
+
+	ieee802154_free_hw(atusb->hw);
+
+	usb_set_intfdata(interface, NULL);
+
+	pr_debug("%s done\n", __func__);
+}
+
+/* The devices we work with */
+static const struct usb_device_id atusb_device_table[] = {
+	{
+		.match_flags		= USB_DEVICE_ID_MATCH_DEVICE |
+					  USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor		= ATUSB_VENDOR_ID,
+		.idProduct		= ATUSB_PRODUCT_ID,
+		.bInterfaceClass	= USB_CLASS_VENDOR_SPEC
+	},
+	/* end with null element */
+	{}
+};
+MODULE_DEVICE_TABLE(usb, atusb_device_table);
+
+static struct usb_driver atusb_driver = {
+	.name		= "atusb",
+	.probe		= atusb_probe,
+	.disconnect	= atusb_disconnect,
+	.id_table	= atusb_device_table,
+};
+module_usb_driver(atusb_driver);
+
+MODULE_AUTHOR("Alexander Aring <alex.aring@gmail.com>");
+MODULE_AUTHOR("Richard Sharpe <realrichardsharpe@gmail.com>");
+MODULE_AUTHOR("Stefan Schmidt <stefan@datenfreihafen.org>");
+MODULE_AUTHOR("Werner Almesberger <werner@almesberger.net>");
+MODULE_AUTHOR("Josef Filzmaier <j.filzmaier@gmx.at>");
+MODULE_DESCRIPTION("ATUSB IEEE 802.15.4 Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ieee802154/atusb.h b/drivers/net/ieee802154/atusb.h
new file mode 100644
index 000000000..411a611ec
--- /dev/null
+++ b/drivers/net/ieee802154/atusb.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * atusb.h - Definitions shared between kernel and ATUSB firmware
+ *
+ * Written 2013 by Werner Almesberger <werner@almesberger.net>
+ *
+ * (at your option) any later version.
+ *
+ * This file should be identical for kernel and firmware.
+ * Kernel: drivers/net/ieee802154/atusb.h
+ * Firmware: ben-wpan/atusb/fw/include/atusb/atusb.h
+ */
+
+#ifndef	_ATUSB_H
+#define	_ATUSB_H
+
+#define ATUSB_VENDOR_ID	0x20b7	/* Qi Hardware*/
+#define ATUSB_PRODUCT_ID 0x1540	/* 802.15.4, device 0 */
+				/*     -- -         - */
+
+#define ATUSB_BUILD_SIZE 256	/* maximum build version/date message length */
+
+/* Commands to our device. Make sure this is synced with the firmware */
+enum atusb_requests {
+	ATUSB_ID			= 0x00,	/* system status/control grp */
+	ATUSB_BUILD,
+	ATUSB_RESET,
+	ATUSB_RF_RESET			= 0x10,	/* debug/test group */
+	ATUSB_POLL_INT,
+	ATUSB_TEST,			/* atusb-sil only */
+	ATUSB_TIMER,
+	ATUSB_GPIO,
+	ATUSB_SLP_TR,
+	ATUSB_GPIO_CLEANUP,
+	ATUSB_REG_WRITE			= 0x20,	/* transceiver group */
+	ATUSB_REG_READ,
+	ATUSB_BUF_WRITE,
+	ATUSB_BUF_READ,
+	ATUSB_SRAM_WRITE,
+	ATUSB_SRAM_READ,
+	ATUSB_SPI_WRITE			= 0x30,	/* SPI group */
+	ATUSB_SPI_READ1,
+	ATUSB_SPI_READ2,
+	ATUSB_SPI_WRITE2_SYNC,
+	ATUSB_RX_MODE			= 0x40, /* HardMAC group */
+	ATUSB_TX,
+	ATUSB_EUI64_WRITE		= 0x50, /* Parameter in EEPROM grp */
+	ATUSB_EUI64_READ,
+};
+
+enum {
+	ATUSB_HW_TYPE_100813,	/* 2010-08-13 */
+	ATUSB_HW_TYPE_101216,	/* 2010-12-16 */
+	ATUSB_HW_TYPE_110131,	/* 2011-01-31, ATmega32U2-based */
+	ATUSB_HW_TYPE_RZUSB,	/* Atmel Raven USB dongle with at86rf230 */
+	ATUSB_HW_TYPE_HULUSB,	/* Busware HUL USB dongle with at86rf212 */
+};
+
+/*
+ * Direction	bRequest		wValue		wIndex	wLength
+ *
+ * ->host	ATUSB_ID		-		-	3
+ * ->host	ATUSB_BUILD		-		-	#bytes
+ * host->	ATUSB_RESET		-		-	0
+ *
+ * host->	ATUSB_RF_RESET		-		-	0
+ * ->host	ATUSB_POLL_INT		-		-	1
+ * host->	ATUSB_TEST		-		-	0
+ * ->host	ATUSB_TIMER		-		-	#bytes (6)
+ * ->host	ATUSB_GPIO		dir+data	mask+p#	3
+ * host->	ATUSB_SLP_TR		-		-	0
+ * host->	ATUSB_GPIO_CLEANUP	-		-	0
+ *
+ * host->	ATUSB_REG_WRITE		value		addr	0
+ * ->host	ATUSB_REG_READ		-		addr	1
+ * host->	ATUSB_BUF_WRITE		-		-	#bytes
+ * ->host	ATUSB_BUF_READ		-		-	#bytes
+ * host->	ATUSB_SRAM_WRITE	-		addr	#bytes
+ * ->host	ATUSB_SRAM_READ		-		addr	#bytes
+ *
+ * host->	ATUSB_SPI_WRITE		byte0		byte1	#bytes
+ * ->host	ATUSB_SPI_READ1		byte0		-	#bytes
+ * ->host	ATUSB_SPI_READ2		byte0		byte1	#bytes
+ * ->host	ATUSB_SPI_WRITE2_SYNC	byte0		byte1	0/1
+ *
+ * host->	ATUSB_RX_MODE		on		-	0
+ * host->	ATUSB_TX		flags		ack_seq	#bytes
+ * host->	ATUSB_EUI64_WRITE	-		-	#bytes (8)
+ * ->host	ATUSB_EUI64_READ	-		-	#bytes (8)
+ */
+
+#define ATUSB_REQ_FROM_DEV	(USB_TYPE_VENDOR | USB_DIR_IN)
+#define ATUSB_REQ_TO_DEV	(USB_TYPE_VENDOR | USB_DIR_OUT)
+
+#endif /* !_ATUSB_H */
diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c
new file mode 100644
index 000000000..c2201e0ad
--- /dev/null
+++ b/drivers/net/ieee802154/ca8210.c
@@ -0,0 +1,3182 @@
+/*
+ * http://www.cascoda.com/products/ca-821x/
+ * Copyright (c) 2016, Cascoda, Ltd.
+ * All rights reserved.
+ *
+ * This code is dual-licensed under both GPLv2 and 3-clause BSD. What follows is
+ * the license notice for both respectively.
+ *
+ *******************************************************************************
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *******************************************************************************
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of the copyright holder nor the names of its contributors
+ * may be used to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/cdev.h>
+#include <linux/clk-provider.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/ieee802154.h>
+#include <linux/io.h>
+#include <linux/kfifo.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/poll.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+
+#include <net/ieee802154_netdev.h>
+#include <net/mac802154.h>
+
+#define DRIVER_NAME "ca8210"
+
+/* external clock frequencies */
+#define ONE_MHZ      1000000
+#define TWO_MHZ      (2 * ONE_MHZ)
+#define FOUR_MHZ     (4 * ONE_MHZ)
+#define EIGHT_MHZ    (8 * ONE_MHZ)
+#define SIXTEEN_MHZ  (16 * ONE_MHZ)
+
+/* spi constants */
+#define CA8210_SPI_BUF_SIZE 256
+#define CA8210_SYNC_TIMEOUT 1000     /* Timeout for synchronous commands [ms] */
+
+/* test interface constants */
+#define CA8210_TEST_INT_FILE_NAME "ca8210_test"
+#define CA8210_TEST_INT_FIFO_SIZE 256
+
+/* HWME attribute IDs */
+#define HWME_EDTHRESHOLD       (0x04)
+#define HWME_EDVALUE           (0x06)
+#define HWME_SYSCLKOUT         (0x0F)
+#define HWME_LQILIMIT          (0x11)
+
+/* TDME attribute IDs */
+#define TDME_CHANNEL          (0x00)
+#define TDME_ATM_CONFIG       (0x06)
+
+#define MAX_HWME_ATTRIBUTE_SIZE  16
+#define MAX_TDME_ATTRIBUTE_SIZE  2
+
+/* PHY/MAC PIB Attribute Enumerations */
+#define PHY_CURRENT_CHANNEL               (0x00)
+#define PHY_TRANSMIT_POWER                (0x02)
+#define PHY_CCA_MODE                      (0x03)
+#define MAC_ASSOCIATION_PERMIT            (0x41)
+#define MAC_AUTO_REQUEST                  (0x42)
+#define MAC_BATT_LIFE_EXT                 (0x43)
+#define MAC_BATT_LIFE_EXT_PERIODS         (0x44)
+#define MAC_BEACON_PAYLOAD                (0x45)
+#define MAC_BEACON_PAYLOAD_LENGTH         (0x46)
+#define MAC_BEACON_ORDER                  (0x47)
+#define MAC_GTS_PERMIT                    (0x4d)
+#define MAC_MAX_CSMA_BACKOFFS             (0x4e)
+#define MAC_MIN_BE                        (0x4f)
+#define MAC_PAN_ID                        (0x50)
+#define MAC_PROMISCUOUS_MODE              (0x51)
+#define MAC_RX_ON_WHEN_IDLE               (0x52)
+#define MAC_SHORT_ADDRESS                 (0x53)
+#define MAC_SUPERFRAME_ORDER              (0x54)
+#define MAC_ASSOCIATED_PAN_COORD          (0x56)
+#define MAC_MAX_BE                        (0x57)
+#define MAC_MAX_FRAME_RETRIES             (0x59)
+#define MAC_RESPONSE_WAIT_TIME            (0x5A)
+#define MAC_SECURITY_ENABLED              (0x5D)
+
+#define MAC_AUTO_REQUEST_SECURITY_LEVEL   (0x78)
+#define MAC_AUTO_REQUEST_KEY_ID_MODE      (0x79)
+
+#define NS_IEEE_ADDRESS                   (0xFF) /* Non-standard IEEE address */
+
+/* MAC Address Mode Definitions */
+#define MAC_MODE_NO_ADDR                (0x00)
+#define MAC_MODE_SHORT_ADDR             (0x02)
+#define MAC_MODE_LONG_ADDR              (0x03)
+
+/* MAC constants */
+#define MAX_BEACON_OVERHEAD        (75)
+#define MAX_BEACON_PAYLOAD_LENGTH  (IEEE802154_MTU - MAX_BEACON_OVERHEAD)
+
+#define MAX_ATTRIBUTE_SIZE              (122)
+#define MAX_DATA_SIZE                   (114)
+
+#define CA8210_VALID_CHANNELS                 (0x07FFF800)
+
+/* MAC workarounds for V1.1 and MPW silicon (V0.x) */
+#define CA8210_MAC_WORKAROUNDS (0)
+#define CA8210_MAC_MPW         (0)
+
+/* memory manipulation macros */
+#define LS_BYTE(x)     ((u8)((x) & 0xFF))
+#define MS_BYTE(x)     ((u8)(((x) >> 8) & 0xFF))
+
+/* message ID codes in SPI commands */
+/* downstream */
+#define MCPS_DATA_REQUEST                     (0x00)
+#define MLME_ASSOCIATE_REQUEST                (0x02)
+#define MLME_ASSOCIATE_RESPONSE               (0x03)
+#define MLME_DISASSOCIATE_REQUEST             (0x04)
+#define MLME_GET_REQUEST                      (0x05)
+#define MLME_ORPHAN_RESPONSE                  (0x06)
+#define MLME_RESET_REQUEST                    (0x07)
+#define MLME_RX_ENABLE_REQUEST                (0x08)
+#define MLME_SCAN_REQUEST                     (0x09)
+#define MLME_SET_REQUEST                      (0x0A)
+#define MLME_START_REQUEST                    (0x0B)
+#define MLME_POLL_REQUEST                     (0x0D)
+#define HWME_SET_REQUEST                      (0x0E)
+#define HWME_GET_REQUEST                      (0x0F)
+#define TDME_SETSFR_REQUEST                   (0x11)
+#define TDME_GETSFR_REQUEST                   (0x12)
+#define TDME_SET_REQUEST                      (0x14)
+/* upstream */
+#define MCPS_DATA_INDICATION                  (0x00)
+#define MCPS_DATA_CONFIRM                     (0x01)
+#define MLME_RESET_CONFIRM                    (0x0A)
+#define MLME_SET_CONFIRM                      (0x0E)
+#define MLME_START_CONFIRM                    (0x0F)
+#define HWME_SET_CONFIRM                      (0x12)
+#define HWME_GET_CONFIRM                      (0x13)
+#define HWME_WAKEUP_INDICATION		      (0x15)
+#define TDME_SETSFR_CONFIRM                   (0x17)
+
+/* SPI command IDs */
+/* bit indicating a confirm or indication from slave to master */
+#define SPI_S2M                            (0x20)
+/* bit indicating a synchronous message */
+#define SPI_SYN                            (0x40)
+
+/* SPI command definitions */
+#define SPI_IDLE                           (0xFF)
+#define SPI_NACK                           (0xF0)
+
+#define SPI_MCPS_DATA_REQUEST          (MCPS_DATA_REQUEST)
+#define SPI_MCPS_DATA_INDICATION       (MCPS_DATA_INDICATION + SPI_S2M)
+#define SPI_MCPS_DATA_CONFIRM          (MCPS_DATA_CONFIRM + SPI_S2M)
+
+#define SPI_MLME_ASSOCIATE_REQUEST     (MLME_ASSOCIATE_REQUEST)
+#define SPI_MLME_RESET_REQUEST         (MLME_RESET_REQUEST + SPI_SYN)
+#define SPI_MLME_SET_REQUEST           (MLME_SET_REQUEST + SPI_SYN)
+#define SPI_MLME_START_REQUEST         (MLME_START_REQUEST + SPI_SYN)
+#define SPI_MLME_RESET_CONFIRM         (MLME_RESET_CONFIRM + SPI_S2M + SPI_SYN)
+#define SPI_MLME_SET_CONFIRM           (MLME_SET_CONFIRM + SPI_S2M + SPI_SYN)
+#define SPI_MLME_START_CONFIRM         (MLME_START_CONFIRM + SPI_S2M + SPI_SYN)
+
+#define SPI_HWME_SET_REQUEST           (HWME_SET_REQUEST + SPI_SYN)
+#define SPI_HWME_GET_REQUEST           (HWME_GET_REQUEST + SPI_SYN)
+#define SPI_HWME_SET_CONFIRM           (HWME_SET_CONFIRM + SPI_S2M + SPI_SYN)
+#define SPI_HWME_GET_CONFIRM           (HWME_GET_CONFIRM + SPI_S2M + SPI_SYN)
+#define SPI_HWME_WAKEUP_INDICATION     (HWME_WAKEUP_INDICATION + SPI_S2M)
+
+#define SPI_TDME_SETSFR_REQUEST        (TDME_SETSFR_REQUEST + SPI_SYN)
+#define SPI_TDME_SET_REQUEST           (TDME_SET_REQUEST + SPI_SYN)
+#define SPI_TDME_SETSFR_CONFIRM        (TDME_SETSFR_CONFIRM + SPI_S2M + SPI_SYN)
+
+/* TDME SFR addresses */
+/* Page 0 */
+#define CA8210_SFR_PACFG                   (0xB1)
+#define CA8210_SFR_MACCON                  (0xD8)
+#define CA8210_SFR_PACFGIB                 (0xFE)
+/* Page 1 */
+#define CA8210_SFR_LOTXCAL                 (0xBF)
+#define CA8210_SFR_PTHRH                   (0xD1)
+#define CA8210_SFR_PRECFG                  (0xD3)
+#define CA8210_SFR_LNAGX40                 (0xE1)
+#define CA8210_SFR_LNAGX41                 (0xE2)
+#define CA8210_SFR_LNAGX42                 (0xE3)
+#define CA8210_SFR_LNAGX43                 (0xE4)
+#define CA8210_SFR_LNAGX44                 (0xE5)
+#define CA8210_SFR_LNAGX45                 (0xE6)
+#define CA8210_SFR_LNAGX46                 (0xE7)
+#define CA8210_SFR_LNAGX47                 (0xE9)
+
+#define PACFGIB_DEFAULT_CURRENT            (0x3F)
+#define PTHRH_DEFAULT_THRESHOLD            (0x5A)
+#define LNAGX40_DEFAULT_GAIN               (0x29) /* 10dB */
+#define LNAGX41_DEFAULT_GAIN               (0x54) /* 21dB */
+#define LNAGX42_DEFAULT_GAIN               (0x6C) /* 27dB */
+#define LNAGX43_DEFAULT_GAIN               (0x7A) /* 30dB */
+#define LNAGX44_DEFAULT_GAIN               (0x84) /* 33dB */
+#define LNAGX45_DEFAULT_GAIN               (0x8B) /* 34dB */
+#define LNAGX46_DEFAULT_GAIN               (0x92) /* 36dB */
+#define LNAGX47_DEFAULT_GAIN               (0x96) /* 37dB */
+
+#define CA8210_IOCTL_HARD_RESET            (0x00)
+
+/* Structs/Enums */
+
+/**
+ * struct cas_control - spi transfer structure
+ * @msg:                  spi_message for each exchange
+ * @transfer:             spi_transfer for each exchange
+ * @tx_buf:               source array for transmission
+ * @tx_in_buf:            array storing bytes received during transmission
+ * @priv:                 pointer to private data
+ *
+ * This structure stores all the necessary data passed around during a single
+ * spi exchange.
+ */
+struct cas_control {
+	struct spi_message msg;
+	struct spi_transfer transfer;
+
+	u8 tx_buf[CA8210_SPI_BUF_SIZE];
+	u8 tx_in_buf[CA8210_SPI_BUF_SIZE];
+
+	struct ca8210_priv *priv;
+};
+
+/**
+ * struct ca8210_test - ca8210 test interface structure
+ * @ca8210_dfs_spi_int: pointer to the entry in the debug fs for this device
+ * @up_fifo:            fifo for upstream messages
+ * @readq:              read wait queue
+ *
+ * This structure stores all the data pertaining to the debug interface
+ */
+struct ca8210_test {
+	struct dentry *ca8210_dfs_spi_int;
+	struct kfifo up_fifo;
+	wait_queue_head_t readq;
+};
+
+/**
+ * struct ca8210_priv - ca8210 private data structure
+ * @spi:                    pointer to the ca8210 spi device object
+ * @hw:                     pointer to the ca8210 ieee802154_hw object
+ * @hw_registered:          true if hw has been registered with ieee802154
+ * @lock:                   spinlock protecting the private data area
+ * @mlme_workqueue:           workqueue for triggering MLME Reset
+ * @irq_workqueue:          workqueue for irq processing
+ * @tx_skb:                 current socket buffer to transmit
+ * @nextmsduhandle:         msdu handle to pass to the 15.4 MAC layer for the
+ *                           next transmission
+ * @clk:                    external clock provided by the ca8210
+ * @last_dsn:               sequence number of last data packet received, for
+ *                           resend detection
+ * @test:                   test interface data section for this instance
+ * @async_tx_pending:       true if an asynchronous transmission was started and
+ *                           is not complete
+ * @sync_command_response:  pointer to buffer to fill with sync response
+ * @ca8210_is_awake:        nonzero if ca8210 is initialised, ready for comms
+ * @sync_down:              counts number of downstream synchronous commands
+ * @sync_up:                counts number of upstream synchronous commands
+ * @spi_transfer_complete:  completion object for a single spi_transfer
+ * @sync_exchange_complete: completion object for a complete synchronous API
+ *                          exchange
+ * @promiscuous:            whether the ca8210 is in promiscuous mode or not
+ * @retries:                records how many times the current pending spi
+ *                          transfer has been retried
+ */
+struct ca8210_priv {
+	struct spi_device *spi;
+	struct ieee802154_hw *hw;
+	bool hw_registered;
+	spinlock_t lock;
+	struct workqueue_struct *mlme_workqueue;
+	struct workqueue_struct *irq_workqueue;
+	struct sk_buff *tx_skb;
+	u8 nextmsduhandle;
+	struct clk *clk;
+	int last_dsn;
+	struct ca8210_test test;
+	bool async_tx_pending;
+	u8 *sync_command_response;
+	struct completion ca8210_is_awake;
+	int sync_down, sync_up;
+	struct completion spi_transfer_complete, sync_exchange_complete;
+	bool promiscuous;
+	int retries;
+};
+
+/**
+ * struct work_priv_container - link between a work object and the relevant
+ *                              device's private data
+ * @work: work object being executed
+ * @priv: device's private data section
+ *
+ */
+struct work_priv_container {
+	struct work_struct work;
+	struct ca8210_priv *priv;
+};
+
+/**
+ * struct ca8210_platform_data - ca8210 platform data structure
+ * @extclockenable: true if the external clock is to be enabled
+ * @extclockfreq:   frequency of the external clock
+ * @extclockgpio:   ca8210 output gpio of the external clock
+ * @gpio_reset:     gpio number of ca8210 reset line
+ * @gpio_irq:       gpio number of ca8210 interrupt line
+ * @irq_id:         identifier for the ca8210 irq
+ *
+ */
+struct ca8210_platform_data {
+	bool extclockenable;
+	unsigned int extclockfreq;
+	unsigned int extclockgpio;
+	int gpio_reset;
+	int gpio_irq;
+	int irq_id;
+};
+
+/**
+ * struct fulladdr - full MAC addressing information structure
+ * @mode:    address mode (none, short, extended)
+ * @pan_id:  16-bit LE pan id
+ * @address: LE address, variable length as specified by mode
+ *
+ */
+struct fulladdr {
+	u8         mode;
+	u8         pan_id[2];
+	u8         address[8];
+};
+
+/**
+ * union macaddr: generic MAC address container
+ * @short_address: 16-bit short address
+ * @ieee_address:  64-bit extended address as LE byte array
+ *
+ */
+union macaddr {
+	u16        short_address;
+	u8         ieee_address[8];
+};
+
+/**
+ * struct secspec: security specification for SAP commands
+ * @security_level: 0-7, controls level of authentication & encryption
+ * @key_id_mode:    0-3, specifies how to obtain key
+ * @key_source:     extended key retrieval data
+ * @key_index:      single-byte key identifier
+ *
+ */
+struct secspec {
+	u8         security_level;
+	u8         key_id_mode;
+	u8         key_source[8];
+	u8         key_index;
+};
+
+/* downlink functions parameter set definitions */
+struct mcps_data_request_pset {
+	u8              src_addr_mode;
+	struct fulladdr dst;
+	u8              msdu_length;
+	u8              msdu_handle;
+	u8              tx_options;
+	u8              msdu[MAX_DATA_SIZE];
+};
+
+struct mlme_set_request_pset {
+	u8         pib_attribute;
+	u8         pib_attribute_index;
+	u8         pib_attribute_length;
+	u8         pib_attribute_value[MAX_ATTRIBUTE_SIZE];
+};
+
+struct hwme_set_request_pset {
+	u8         hw_attribute;
+	u8         hw_attribute_length;
+	u8         hw_attribute_value[MAX_HWME_ATTRIBUTE_SIZE];
+};
+
+struct hwme_get_request_pset {
+	u8         hw_attribute;
+};
+
+struct tdme_setsfr_request_pset {
+	u8         sfr_page;
+	u8         sfr_address;
+	u8         sfr_value;
+};
+
+/* uplink functions parameter set definitions */
+struct hwme_set_confirm_pset {
+	u8         status;
+	u8         hw_attribute;
+};
+
+struct hwme_get_confirm_pset {
+	u8         status;
+	u8         hw_attribute;
+	u8         hw_attribute_length;
+	u8         hw_attribute_value[MAX_HWME_ATTRIBUTE_SIZE];
+};
+
+struct tdme_setsfr_confirm_pset {
+	u8         status;
+	u8         sfr_page;
+	u8         sfr_address;
+};
+
+struct mac_message {
+	u8      command_id;
+	u8      length;
+	union {
+		struct mcps_data_request_pset       data_req;
+		struct mlme_set_request_pset        set_req;
+		struct hwme_set_request_pset        hwme_set_req;
+		struct hwme_get_request_pset        hwme_get_req;
+		struct tdme_setsfr_request_pset     tdme_set_sfr_req;
+		struct hwme_set_confirm_pset        hwme_set_cnf;
+		struct hwme_get_confirm_pset        hwme_get_cnf;
+		struct tdme_setsfr_confirm_pset     tdme_set_sfr_cnf;
+		u8                                  u8param;
+		u8                                  status;
+		u8                                  payload[148];
+	} pdata;
+};
+
+union pa_cfg_sfr {
+	struct {
+		u8 bias_current_trim     : 3;
+		u8 /* reserved */        : 1;
+		u8 buffer_capacitor_trim : 3;
+		u8 boost                 : 1;
+	};
+	u8 paib;
+};
+
+struct preamble_cfg_sfr {
+	u8 timeout_symbols      : 3;
+	u8 acquisition_symbols  : 3;
+	u8 search_symbols       : 2;
+};
+
+static int (*cascoda_api_upstream)(
+	const u8 *buf,
+	size_t len,
+	void *device_ref
+);
+
+/**
+ * link_to_linux_err() - Translates an 802.15.4 return code into the closest
+ *                       linux error
+ * @link_status:  802.15.4 status code
+ *
+ * Return: 0 or Linux error code
+ */
+static int link_to_linux_err(int link_status)
+{
+	if (link_status < 0) {
+		/* status is already a Linux code */
+		return link_status;
+	}
+	switch (link_status) {
+	case IEEE802154_SUCCESS:
+	case IEEE802154_REALIGNMENT:
+		return 0;
+	case IEEE802154_IMPROPER_KEY_TYPE:
+		return -EKEYREJECTED;
+	case IEEE802154_IMPROPER_SECURITY_LEVEL:
+	case IEEE802154_UNSUPPORTED_LEGACY:
+	case IEEE802154_DENIED:
+		return -EACCES;
+	case IEEE802154_BEACON_LOST:
+	case IEEE802154_NO_ACK:
+	case IEEE802154_NO_BEACON:
+		return -ENETUNREACH;
+	case IEEE802154_CHANNEL_ACCESS_FAILURE:
+	case IEEE802154_TX_ACTIVE:
+	case IEEE802154_SCAN_IN_PROGRESS:
+		return -EBUSY;
+	case IEEE802154_DISABLE_TRX_FAILURE:
+	case IEEE802154_OUT_OF_CAP:
+		return -EAGAIN;
+	case IEEE802154_FRAME_TOO_LONG:
+		return -EMSGSIZE;
+	case IEEE802154_INVALID_GTS:
+	case IEEE802154_PAST_TIME:
+		return -EBADSLT;
+	case IEEE802154_INVALID_HANDLE:
+		return -EBADMSG;
+	case IEEE802154_INVALID_PARAMETER:
+	case IEEE802154_UNSUPPORTED_ATTRIBUTE:
+	case IEEE802154_ON_TIME_TOO_LONG:
+	case IEEE802154_INVALID_INDEX:
+		return -EINVAL;
+	case IEEE802154_NO_DATA:
+		return -ENODATA;
+	case IEEE802154_NO_SHORT_ADDRESS:
+		return -EFAULT;
+	case IEEE802154_PAN_ID_CONFLICT:
+		return -EADDRINUSE;
+	case IEEE802154_TRANSACTION_EXPIRED:
+		return -ETIME;
+	case IEEE802154_TRANSACTION_OVERFLOW:
+		return -ENOBUFS;
+	case IEEE802154_UNAVAILABLE_KEY:
+		return -ENOKEY;
+	case IEEE802154_INVALID_ADDRESS:
+		return -ENXIO;
+	case IEEE802154_TRACKING_OFF:
+	case IEEE802154_SUPERFRAME_OVERLAP:
+		return -EREMOTEIO;
+	case IEEE802154_LIMIT_REACHED:
+		return -EDQUOT;
+	case IEEE802154_READ_ONLY:
+		return -EROFS;
+	default:
+		return -EPROTO;
+	}
+}
+
+/**
+ * ca8210_test_int_driver_write() - Writes a message to the test interface to be
+ *                                  read by the userspace
+ * @buf:  Buffer containing upstream message
+ * @len:  length of message to write
+ * @spi:  SPI device of message originator
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_test_int_driver_write(
+	const u8       *buf,
+	size_t          len,
+	void           *spi
+)
+{
+	struct ca8210_priv *priv = spi_get_drvdata(spi);
+	struct ca8210_test *test = &priv->test;
+	char *fifo_buffer;
+	int i;
+
+	dev_dbg(
+		&priv->spi->dev,
+		"test_interface: Buffering upstream message:\n"
+	);
+	for (i = 0; i < len; i++)
+		dev_dbg(&priv->spi->dev, "%#03x\n", buf[i]);
+
+	fifo_buffer = kmemdup(buf, len, GFP_KERNEL);
+	if (!fifo_buffer)
+		return -ENOMEM;
+	kfifo_in(&test->up_fifo, &fifo_buffer, 4);
+	wake_up_interruptible(&priv->test.readq);
+
+	return 0;
+}
+
+/* SPI Operation */
+
+static int ca8210_net_rx(
+	struct ieee802154_hw  *hw,
+	u8                    *command,
+	size_t                 len
+);
+static u8 mlme_reset_request_sync(
+	u8       set_default_pib,
+	void    *device_ref
+);
+static int ca8210_spi_transfer(
+	struct spi_device *spi,
+	const u8          *buf,
+	size_t             len
+);
+
+/**
+ * ca8210_reset_send() - Hard resets the ca8210 for a given time
+ * @spi:  Pointer to target ca8210 spi device
+ * @ms:   Milliseconds to hold the reset line low for
+ */
+static void ca8210_reset_send(struct spi_device *spi, unsigned int ms)
+{
+	struct ca8210_platform_data *pdata = spi->dev.platform_data;
+	struct ca8210_priv *priv = spi_get_drvdata(spi);
+	long status;
+
+	gpio_set_value(pdata->gpio_reset, 0);
+	reinit_completion(&priv->ca8210_is_awake);
+	msleep(ms);
+	gpio_set_value(pdata->gpio_reset, 1);
+	priv->promiscuous = false;
+
+	/* Wait until wakeup indication seen */
+	status = wait_for_completion_interruptible_timeout(
+		&priv->ca8210_is_awake,
+		msecs_to_jiffies(CA8210_SYNC_TIMEOUT)
+	);
+	if (status == 0) {
+		dev_crit(
+			&spi->dev,
+			"Fatal: No wakeup from ca8210 after reset!\n"
+		);
+	}
+
+	dev_dbg(&spi->dev, "Reset the device\n");
+}
+
+/**
+ * ca8210_mlme_reset_worker() - Resets the MLME, Called when the MAC OVERFLOW
+ *                              condition happens.
+ * @work:  Pointer to work being executed
+ */
+static void ca8210_mlme_reset_worker(struct work_struct *work)
+{
+	struct work_priv_container *wpc = container_of(
+		work,
+		struct work_priv_container,
+		work
+	);
+	struct ca8210_priv *priv = wpc->priv;
+
+	mlme_reset_request_sync(0, priv->spi);
+	kfree(wpc);
+}
+
+/**
+ * ca8210_rx_done() - Calls various message dispatches responding to a received
+ *                    command
+ * @cas_ctl: Pointer to the cas_control object for the relevant spi transfer
+ *
+ * Presents a received SAP command from the ca8210 to the Cascoda EVBME, test
+ * interface and network driver.
+ */
+static void ca8210_rx_done(struct cas_control *cas_ctl)
+{
+	u8 *buf;
+	unsigned int len;
+	struct work_priv_container *mlme_reset_wpc;
+	struct ca8210_priv *priv = cas_ctl->priv;
+
+	buf = cas_ctl->tx_in_buf;
+	len = buf[1] + 2;
+	if (len > CA8210_SPI_BUF_SIZE) {
+		dev_crit(
+			&priv->spi->dev,
+			"Received packet len (%u) erroneously long\n",
+			len
+		);
+		goto finish;
+	}
+
+	if (buf[0] & SPI_SYN) {
+		if (priv->sync_command_response) {
+			memcpy(priv->sync_command_response, buf, len);
+			complete(&priv->sync_exchange_complete);
+		} else {
+			if (cascoda_api_upstream)
+				cascoda_api_upstream(buf, len, priv->spi);
+			priv->sync_up++;
+		}
+	} else {
+		if (cascoda_api_upstream)
+			cascoda_api_upstream(buf, len, priv->spi);
+	}
+
+	ca8210_net_rx(priv->hw, buf, len);
+	if (buf[0] == SPI_MCPS_DATA_CONFIRM) {
+		if (buf[3] == IEEE802154_TRANSACTION_OVERFLOW) {
+			dev_info(
+				&priv->spi->dev,
+				"Waiting for transaction overflow to stabilise...\n");
+			msleep(2000);
+			dev_info(
+				&priv->spi->dev,
+				"Resetting MAC...\n");
+
+			mlme_reset_wpc = kmalloc(sizeof(*mlme_reset_wpc),
+						 GFP_KERNEL);
+			if (!mlme_reset_wpc)
+				goto finish;
+			INIT_WORK(
+				&mlme_reset_wpc->work,
+				ca8210_mlme_reset_worker
+			);
+			mlme_reset_wpc->priv = priv;
+			queue_work(priv->mlme_workqueue, &mlme_reset_wpc->work);
+		}
+	} else if (buf[0] == SPI_HWME_WAKEUP_INDICATION) {
+		dev_notice(
+			&priv->spi->dev,
+			"Wakeup indication received, reason:\n"
+		);
+		switch (buf[2]) {
+		case 0:
+			dev_notice(
+				&priv->spi->dev,
+				"Transceiver woken up from Power Up / System Reset\n"
+			);
+			break;
+		case 1:
+			dev_notice(
+				&priv->spi->dev,
+				"Watchdog Timer Time-Out\n"
+			);
+			break;
+		case 2:
+			dev_notice(
+				&priv->spi->dev,
+				"Transceiver woken up from Power-Off by Sleep Timer Time-Out\n");
+			break;
+		case 3:
+			dev_notice(
+				&priv->spi->dev,
+				"Transceiver woken up from Power-Off by GPIO Activity\n"
+			);
+			break;
+		case 4:
+			dev_notice(
+				&priv->spi->dev,
+				"Transceiver woken up from Standby by Sleep Timer Time-Out\n"
+			);
+			break;
+		case 5:
+			dev_notice(
+				&priv->spi->dev,
+				"Transceiver woken up from Standby by GPIO Activity\n"
+			);
+			break;
+		case 6:
+			dev_notice(
+				&priv->spi->dev,
+				"Sleep-Timer Time-Out in Active Mode\n"
+			);
+			break;
+		default:
+			dev_warn(&priv->spi->dev, "Wakeup reason unknown\n");
+			break;
+		}
+		complete(&priv->ca8210_is_awake);
+	}
+
+finish:;
+}
+
+static void ca8210_remove(struct spi_device *spi_device);
+
+/**
+ * ca8210_spi_transfer_complete() - Called when a single spi transfer has
+ *                                  completed
+ * @context:  Pointer to the cas_control object for the finished transfer
+ */
+static void ca8210_spi_transfer_complete(void *context)
+{
+	struct cas_control *cas_ctl = context;
+	struct ca8210_priv *priv = cas_ctl->priv;
+	bool duplex_rx = false;
+	int i;
+	u8 retry_buffer[CA8210_SPI_BUF_SIZE];
+
+	if (
+		cas_ctl->tx_in_buf[0] == SPI_NACK ||
+		(cas_ctl->tx_in_buf[0] == SPI_IDLE &&
+		cas_ctl->tx_in_buf[1] == SPI_NACK)
+	) {
+		/* ca8210 is busy */
+		dev_info(&priv->spi->dev, "ca8210 was busy during attempted write\n");
+		if (cas_ctl->tx_buf[0] == SPI_IDLE) {
+			dev_warn(
+				&priv->spi->dev,
+				"IRQ servicing NACKd, dropping transfer\n"
+			);
+			kfree(cas_ctl);
+			return;
+		}
+		if (priv->retries > 3) {
+			dev_err(&priv->spi->dev, "too many retries!\n");
+			kfree(cas_ctl);
+			ca8210_remove(priv->spi);
+			return;
+		}
+		memcpy(retry_buffer, cas_ctl->tx_buf, CA8210_SPI_BUF_SIZE);
+		kfree(cas_ctl);
+		ca8210_spi_transfer(
+			priv->spi,
+			retry_buffer,
+			CA8210_SPI_BUF_SIZE
+		);
+		priv->retries++;
+		dev_info(&priv->spi->dev, "retried spi write\n");
+		return;
+	} else if (
+			cas_ctl->tx_in_buf[0] != SPI_IDLE &&
+			cas_ctl->tx_in_buf[0] != SPI_NACK
+		) {
+		duplex_rx = true;
+	}
+
+	if (duplex_rx) {
+		dev_dbg(&priv->spi->dev, "READ CMD DURING TX\n");
+		for (i = 0; i < cas_ctl->tx_in_buf[1] + 2; i++)
+			dev_dbg(
+				&priv->spi->dev,
+				"%#03x\n",
+				cas_ctl->tx_in_buf[i]
+			);
+		ca8210_rx_done(cas_ctl);
+	}
+	complete(&priv->spi_transfer_complete);
+	kfree(cas_ctl);
+	priv->retries = 0;
+}
+
+/**
+ * ca8210_spi_transfer() - Initiate duplex spi transfer with ca8210
+ * @spi: Pointer to spi device for transfer
+ * @buf: Octet array to send
+ * @len: length of the buffer being sent
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_spi_transfer(
+	struct spi_device  *spi,
+	const u8           *buf,
+	size_t              len
+)
+{
+	int i, status = 0;
+	struct ca8210_priv *priv;
+	struct cas_control *cas_ctl;
+
+	if (!spi) {
+		pr_crit("NULL spi device passed to %s\n", __func__);
+		return -ENODEV;
+	}
+
+	priv = spi_get_drvdata(spi);
+	reinit_completion(&priv->spi_transfer_complete);
+
+	dev_dbg(&spi->dev, "%s called\n", __func__);
+
+	cas_ctl = kzalloc(sizeof(*cas_ctl), GFP_ATOMIC);
+	if (!cas_ctl)
+		return -ENOMEM;
+
+	cas_ctl->priv = priv;
+	memset(cas_ctl->tx_buf, SPI_IDLE, CA8210_SPI_BUF_SIZE);
+	memset(cas_ctl->tx_in_buf, SPI_IDLE, CA8210_SPI_BUF_SIZE);
+	memcpy(cas_ctl->tx_buf, buf, len);
+
+	for (i = 0; i < len; i++)
+		dev_dbg(&spi->dev, "%#03x\n", cas_ctl->tx_buf[i]);
+
+	spi_message_init(&cas_ctl->msg);
+
+	cas_ctl->transfer.tx_nbits = 1; /* 1 MOSI line */
+	cas_ctl->transfer.rx_nbits = 1; /* 1 MISO line */
+	cas_ctl->transfer.speed_hz = 0; /* Use device setting */
+	cas_ctl->transfer.bits_per_word = 0; /* Use device setting */
+	cas_ctl->transfer.tx_buf = cas_ctl->tx_buf;
+	cas_ctl->transfer.rx_buf = cas_ctl->tx_in_buf;
+	cas_ctl->transfer.delay.value = 0;
+	cas_ctl->transfer.delay.unit = SPI_DELAY_UNIT_USECS;
+	cas_ctl->transfer.cs_change = 0;
+	cas_ctl->transfer.len = sizeof(struct mac_message);
+	cas_ctl->msg.complete = ca8210_spi_transfer_complete;
+	cas_ctl->msg.context = cas_ctl;
+
+	spi_message_add_tail(
+		&cas_ctl->transfer,
+		&cas_ctl->msg
+	);
+
+	status = spi_async(spi, &cas_ctl->msg);
+	if (status < 0) {
+		dev_crit(
+			&spi->dev,
+			"status %d from spi_sync in write\n",
+			status
+		);
+	}
+
+	return status;
+}
+
+/**
+ * ca8210_spi_exchange() - Exchange API/SAP commands with the radio
+ * @buf:         Octet array of command being sent downstream
+ * @len:         length of buf
+ * @response:    buffer for storing synchronous response
+ * @device_ref:  spi_device pointer for ca8210
+ *
+ * Effectively calls ca8210_spi_transfer to write buf[] to the spi, then for
+ * synchronous commands waits for the corresponding response to be read from
+ * the spi before returning. The response is written to the response parameter.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_spi_exchange(
+	const u8 *buf,
+	size_t len,
+	u8 *response,
+	void *device_ref
+)
+{
+	int status = 0;
+	struct spi_device *spi = device_ref;
+	struct ca8210_priv *priv = spi->dev.driver_data;
+	long wait_remaining;
+
+	if ((buf[0] & SPI_SYN) && response) { /* if sync wait for confirm */
+		reinit_completion(&priv->sync_exchange_complete);
+		priv->sync_command_response = response;
+	}
+
+	do {
+		reinit_completion(&priv->spi_transfer_complete);
+		status = ca8210_spi_transfer(priv->spi, buf, len);
+		if (status) {
+			dev_warn(
+				&spi->dev,
+				"spi write failed, returned %d\n",
+				status
+			);
+			if (status == -EBUSY)
+				continue;
+			if (((buf[0] & SPI_SYN) && response))
+				complete(&priv->sync_exchange_complete);
+			goto cleanup;
+		}
+
+		wait_remaining = wait_for_completion_interruptible_timeout(
+			&priv->spi_transfer_complete,
+			msecs_to_jiffies(1000)
+		);
+		if (wait_remaining == -ERESTARTSYS) {
+			status = -ERESTARTSYS;
+		} else if (wait_remaining == 0) {
+			dev_err(
+				&spi->dev,
+				"SPI downstream transfer timed out!\n"
+			);
+			status = -ETIME;
+			goto cleanup;
+		}
+	} while (status < 0);
+
+	if (!((buf[0] & SPI_SYN) && response))
+		goto cleanup;
+
+	wait_remaining = wait_for_completion_interruptible_timeout(
+		&priv->sync_exchange_complete,
+		msecs_to_jiffies(CA8210_SYNC_TIMEOUT)
+	);
+	if (wait_remaining == -ERESTARTSYS) {
+		status = -ERESTARTSYS;
+	} else if (wait_remaining == 0) {
+		dev_err(
+			&spi->dev,
+			"Synchronous confirm timeout\n"
+		);
+		status = -ETIME;
+	}
+
+cleanup:
+	priv->sync_command_response = NULL;
+	return status;
+}
+
+/**
+ * ca8210_interrupt_handler() - Called when an irq is received from the ca8210
+ * @irq:     Id of the irq being handled
+ * @dev_id:  Pointer passed by the system, pointing to the ca8210's private data
+ *
+ * This function is called when the irq line from the ca8210 is asserted,
+ * signifying that the ca8210 has a message to send upstream to us. Starts the
+ * asynchronous spi read.
+ *
+ * Return: irq return code
+ */
+static irqreturn_t ca8210_interrupt_handler(int irq, void *dev_id)
+{
+	struct ca8210_priv *priv = dev_id;
+	int status;
+
+	dev_dbg(&priv->spi->dev, "irq: Interrupt occurred\n");
+	do {
+		status = ca8210_spi_transfer(priv->spi, NULL, 0);
+		if (status && (status != -EBUSY)) {
+			dev_warn(
+				&priv->spi->dev,
+				"spi read failed, returned %d\n",
+				status
+			);
+		}
+	} while (status == -EBUSY);
+	return IRQ_HANDLED;
+}
+
+static int (*cascoda_api_downstream)(
+	const u8 *buf,
+	size_t len,
+	u8 *response,
+	void *device_ref
+) = ca8210_spi_exchange;
+
+/* Cascoda API / 15.4 SAP Primitives */
+
+/**
+ * tdme_setsfr_request_sync() - TDME_SETSFR_request/confirm according to API
+ * @sfr_page:    SFR Page
+ * @sfr_address: SFR Address
+ * @sfr_value:   SFR Value
+ * @device_ref:  Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of TDME-SETSFR.confirm
+ */
+static u8 tdme_setsfr_request_sync(
+	u8            sfr_page,
+	u8            sfr_address,
+	u8            sfr_value,
+	void         *device_ref
+)
+{
+	int ret;
+	struct mac_message command, response;
+	struct spi_device *spi = device_ref;
+
+	command.command_id = SPI_TDME_SETSFR_REQUEST;
+	command.length = 3;
+	command.pdata.tdme_set_sfr_req.sfr_page    = sfr_page;
+	command.pdata.tdme_set_sfr_req.sfr_address = sfr_address;
+	command.pdata.tdme_set_sfr_req.sfr_value   = sfr_value;
+	response.command_id = SPI_IDLE;
+	ret = cascoda_api_downstream(
+		&command.command_id,
+		command.length + 2,
+		&response.command_id,
+		device_ref
+	);
+	if (ret) {
+		dev_crit(&spi->dev, "cascoda_api_downstream returned %d", ret);
+		return IEEE802154_SYSTEM_ERROR;
+	}
+
+	if (response.command_id != SPI_TDME_SETSFR_CONFIRM) {
+		dev_crit(
+			&spi->dev,
+			"sync response to SPI_TDME_SETSFR_REQUEST was not SPI_TDME_SETSFR_CONFIRM, it was %d\n",
+			response.command_id
+		);
+		return IEEE802154_SYSTEM_ERROR;
+	}
+
+	return response.pdata.tdme_set_sfr_cnf.status;
+}
+
+/**
+ * tdme_chipinit() - TDME Chip Register Default Initialisation Macro
+ * @device_ref: Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of API calls
+ */
+static u8 tdme_chipinit(void *device_ref)
+{
+	u8 status = IEEE802154_SUCCESS;
+	u8 sfr_address;
+	struct spi_device *spi = device_ref;
+	struct preamble_cfg_sfr pre_cfg_value = {
+		.timeout_symbols     = 3,
+		.acquisition_symbols = 3,
+		.search_symbols      = 1,
+	};
+	/* LNA Gain Settings */
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX40),
+		LNAGX40_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX41),
+		LNAGX41_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX42),
+		LNAGX42_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX43),
+		LNAGX43_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX44),
+		LNAGX44_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX45),
+		LNAGX45_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX46),
+		LNAGX46_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_LNAGX47),
+		LNAGX47_DEFAULT_GAIN, device_ref);
+	if (status)
+		goto finish;
+	/* Preamble Timing Config */
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_PRECFG),
+		*((u8 *)&pre_cfg_value), device_ref);
+	if (status)
+		goto finish;
+	/* Preamble Threshold High */
+	status = tdme_setsfr_request_sync(
+		1, (sfr_address = CA8210_SFR_PTHRH),
+		PTHRH_DEFAULT_THRESHOLD, device_ref);
+	if (status)
+		goto finish;
+	/* Tx Output Power 8 dBm */
+	status = tdme_setsfr_request_sync(
+		0, (sfr_address = CA8210_SFR_PACFGIB),
+		PACFGIB_DEFAULT_CURRENT, device_ref);
+	if (status)
+		goto finish;
+
+finish:
+	if (status != IEEE802154_SUCCESS) {
+		dev_err(
+			&spi->dev,
+			"failed to set sfr at %#03x, status = %#03x\n",
+			sfr_address,
+			status
+		);
+	}
+	return status;
+}
+
+/**
+ * tdme_channelinit() - TDME Channel Register Default Initialisation Macro (Tx)
+ * @channel:    802.15.4 channel to initialise chip for
+ * @device_ref: Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of API calls
+ */
+static u8 tdme_channelinit(u8 channel, void *device_ref)
+{
+	/* Transceiver front-end local oscillator tx two-point calibration
+	 * value. Tuned for the hardware.
+	 */
+	u8 txcalval;
+
+	if (channel >= 25)
+		txcalval = 0xA7;
+	else if (channel >= 23)
+		txcalval = 0xA8;
+	else if (channel >= 22)
+		txcalval = 0xA9;
+	else if (channel >= 20)
+		txcalval = 0xAA;
+	else if (channel >= 17)
+		txcalval = 0xAB;
+	else if (channel >= 16)
+		txcalval = 0xAC;
+	else if (channel >= 14)
+		txcalval = 0xAD;
+	else if (channel >= 12)
+		txcalval = 0xAE;
+	else
+		txcalval = 0xAF;
+
+	return tdme_setsfr_request_sync(
+		1,
+		CA8210_SFR_LOTXCAL,
+		txcalval,
+		device_ref
+	);  /* LO Tx Cal */
+}
+
+/**
+ * tdme_checkpibattribute() - Checks Attribute Values that are not checked in
+ *                            MAC
+ * @pib_attribute:        Attribute Number
+ * @pib_attribute_length: Attribute length
+ * @pib_attribute_value:  Pointer to Attribute Value
+ *
+ * Return: 802.15.4 status code of checks
+ */
+static u8 tdme_checkpibattribute(
+	u8            pib_attribute,
+	u8            pib_attribute_length,
+	const void   *pib_attribute_value
+)
+{
+	u8 status = IEEE802154_SUCCESS;
+	u8 value;
+
+	value  = *((u8 *)pib_attribute_value);
+
+	switch (pib_attribute) {
+	/* PHY */
+	case PHY_TRANSMIT_POWER:
+		if (value > 0x3F)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	case PHY_CCA_MODE:
+		if (value > 0x03)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	/* MAC */
+	case MAC_BATT_LIFE_EXT_PERIODS:
+		if (value < 6 || value > 41)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	case MAC_BEACON_PAYLOAD:
+		if (pib_attribute_length > MAX_BEACON_PAYLOAD_LENGTH)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	case MAC_BEACON_PAYLOAD_LENGTH:
+		if (value > MAX_BEACON_PAYLOAD_LENGTH)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	case MAC_BEACON_ORDER:
+		if (value > 15)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	case MAC_MAX_BE:
+		if (value < 3 || value > 8)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	case MAC_MAX_CSMA_BACKOFFS:
+		if (value > 5)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	case MAC_MAX_FRAME_RETRIES:
+		if (value > 7)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	case MAC_MIN_BE:
+		if (value > 8)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	case MAC_RESPONSE_WAIT_TIME:
+		if (value < 2 || value > 64)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	case MAC_SUPERFRAME_ORDER:
+		if (value > 15)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	/* boolean */
+	case MAC_ASSOCIATED_PAN_COORD:
+	case MAC_ASSOCIATION_PERMIT:
+	case MAC_AUTO_REQUEST:
+	case MAC_BATT_LIFE_EXT:
+	case MAC_GTS_PERMIT:
+	case MAC_PROMISCUOUS_MODE:
+	case MAC_RX_ON_WHEN_IDLE:
+	case MAC_SECURITY_ENABLED:
+		if (value > 1)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	/* MAC SEC */
+	case MAC_AUTO_REQUEST_SECURITY_LEVEL:
+		if (value > 7)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	case MAC_AUTO_REQUEST_KEY_ID_MODE:
+		if (value > 3)
+			status = IEEE802154_INVALID_PARAMETER;
+		break;
+	default:
+		break;
+	}
+
+	return status;
+}
+
+/**
+ * tdme_settxpower() - Sets the tx power for MLME_SET phyTransmitPower
+ * @txp:        Transmit Power
+ * @device_ref: Nondescript pointer to target device
+ *
+ * Normalised to 802.15.4 Definition (6-bit, signed):
+ * Bit 7-6: not used
+ * Bit 5-0: tx power (-32 - +31 dB)
+ *
+ * Return: 802.15.4 status code of api calls
+ */
+static u8 tdme_settxpower(u8 txp, void *device_ref)
+{
+	u8 status;
+	s8 txp_val;
+	u8 txp_ext;
+	union pa_cfg_sfr pa_cfg_val;
+
+	/* extend from 6 to 8 bit */
+	txp_ext = 0x3F & txp;
+	if (txp_ext & 0x20)
+		txp_ext += 0xC0;
+	txp_val = (s8)txp_ext;
+
+	if (CA8210_MAC_MPW) {
+		if (txp_val > 0) {
+			/* 8 dBm: ptrim = 5, itrim = +3 => +4 dBm */
+			pa_cfg_val.bias_current_trim     = 3;
+			pa_cfg_val.buffer_capacitor_trim = 5;
+			pa_cfg_val.boost                 = 1;
+		} else {
+			/* 0 dBm: ptrim = 7, itrim = +3 => -6 dBm */
+			pa_cfg_val.bias_current_trim     = 3;
+			pa_cfg_val.buffer_capacitor_trim = 7;
+			pa_cfg_val.boost                 = 0;
+		}
+		/* write PACFG */
+		status = tdme_setsfr_request_sync(
+			0,
+			CA8210_SFR_PACFG,
+			pa_cfg_val.paib,
+			device_ref
+		);
+	} else {
+		/* Look-Up Table for Setting Current and Frequency Trim values
+		 * for desired Output Power
+		 */
+		if (txp_val > 8) {
+			pa_cfg_val.paib = 0x3F;
+		} else if (txp_val == 8) {
+			pa_cfg_val.paib = 0x32;
+		} else if (txp_val == 7) {
+			pa_cfg_val.paib = 0x22;
+		} else if (txp_val == 6) {
+			pa_cfg_val.paib = 0x18;
+		} else if (txp_val == 5) {
+			pa_cfg_val.paib = 0x10;
+		} else if (txp_val == 4) {
+			pa_cfg_val.paib = 0x0C;
+		} else if (txp_val == 3) {
+			pa_cfg_val.paib = 0x08;
+		} else if (txp_val == 2) {
+			pa_cfg_val.paib = 0x05;
+		} else if (txp_val == 1) {
+			pa_cfg_val.paib = 0x03;
+		} else if (txp_val == 0) {
+			pa_cfg_val.paib = 0x01;
+		} else { /* < 0 */
+			pa_cfg_val.paib = 0x00;
+		}
+		/* write PACFGIB */
+		status = tdme_setsfr_request_sync(
+			0,
+			CA8210_SFR_PACFGIB,
+			pa_cfg_val.paib,
+			device_ref
+		);
+	}
+
+	return status;
+}
+
+/**
+ * mcps_data_request() - mcps_data_request (Send Data) according to API Spec
+ * @src_addr_mode:    Source Addressing Mode
+ * @dst_address_mode: Destination Addressing Mode
+ * @dst_pan_id:       Destination PAN ID
+ * @dst_addr:         Pointer to Destination Address
+ * @msdu_length:      length of Data
+ * @msdu:             Pointer to Data
+ * @msdu_handle:      Handle of Data
+ * @tx_options:       Tx Options Bit Field
+ * @security:         Pointer to Security Structure or NULL
+ * @device_ref:       Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of action
+ */
+static u8 mcps_data_request(
+	u8               src_addr_mode,
+	u8               dst_address_mode,
+	u16              dst_pan_id,
+	union macaddr   *dst_addr,
+	u8               msdu_length,
+	u8              *msdu,
+	u8               msdu_handle,
+	u8               tx_options,
+	struct secspec  *security,
+	void            *device_ref
+)
+{
+	struct secspec *psec;
+	struct mac_message command;
+
+	command.command_id = SPI_MCPS_DATA_REQUEST;
+	command.pdata.data_req.src_addr_mode = src_addr_mode;
+	command.pdata.data_req.dst.mode = dst_address_mode;
+	if (dst_address_mode != MAC_MODE_NO_ADDR) {
+		command.pdata.data_req.dst.pan_id[0] = LS_BYTE(dst_pan_id);
+		command.pdata.data_req.dst.pan_id[1] = MS_BYTE(dst_pan_id);
+		if (dst_address_mode == MAC_MODE_SHORT_ADDR) {
+			command.pdata.data_req.dst.address[0] = LS_BYTE(
+				dst_addr->short_address
+			);
+			command.pdata.data_req.dst.address[1] = MS_BYTE(
+				dst_addr->short_address
+			);
+		} else {   /* MAC_MODE_LONG_ADDR*/
+			memcpy(
+				command.pdata.data_req.dst.address,
+				dst_addr->ieee_address,
+				8
+			);
+		}
+	}
+	command.pdata.data_req.msdu_length = msdu_length;
+	command.pdata.data_req.msdu_handle = msdu_handle;
+	command.pdata.data_req.tx_options = tx_options;
+	memcpy(command.pdata.data_req.msdu, msdu, msdu_length);
+	psec = (struct secspec *)(command.pdata.data_req.msdu + msdu_length);
+	command.length = sizeof(struct mcps_data_request_pset) -
+		MAX_DATA_SIZE + msdu_length;
+	if (!security || security->security_level == 0) {
+		psec->security_level = 0;
+		command.length += 1;
+	} else {
+		*psec = *security;
+		command.length += sizeof(struct secspec);
+	}
+
+	if (ca8210_spi_transfer(device_ref, &command.command_id,
+				command.length + 2))
+		return IEEE802154_SYSTEM_ERROR;
+
+	return IEEE802154_SUCCESS;
+}
+
+/**
+ * mlme_reset_request_sync() - MLME_RESET_request/confirm according to API Spec
+ * @set_default_pib: Set defaults in PIB
+ * @device_ref:      Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of MLME-RESET.confirm
+ */
+static u8 mlme_reset_request_sync(
+	u8    set_default_pib,
+	void *device_ref
+)
+{
+	u8 status;
+	struct mac_message command, response;
+	struct spi_device *spi = device_ref;
+
+	command.command_id = SPI_MLME_RESET_REQUEST;
+	command.length = 1;
+	command.pdata.u8param = set_default_pib;
+
+	if (cascoda_api_downstream(
+		&command.command_id,
+		command.length + 2,
+		&response.command_id,
+		device_ref)) {
+		dev_err(&spi->dev, "cascoda_api_downstream failed\n");
+		return IEEE802154_SYSTEM_ERROR;
+	}
+
+	if (response.command_id != SPI_MLME_RESET_CONFIRM)
+		return IEEE802154_SYSTEM_ERROR;
+
+	status = response.pdata.status;
+
+	/* reset COORD Bit for Channel Filtering as Coordinator */
+	if (CA8210_MAC_WORKAROUNDS && set_default_pib && !status) {
+		status = tdme_setsfr_request_sync(
+			0,
+			CA8210_SFR_MACCON,
+			0,
+			device_ref
+		);
+	}
+
+	return status;
+}
+
+/**
+ * mlme_set_request_sync() - MLME_SET_request/confirm according to API Spec
+ * @pib_attribute:        Attribute Number
+ * @pib_attribute_index:  Index within Attribute if an Array
+ * @pib_attribute_length: Attribute length
+ * @pib_attribute_value:  Pointer to Attribute Value
+ * @device_ref:           Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of MLME-SET.confirm
+ */
+static u8 mlme_set_request_sync(
+	u8            pib_attribute,
+	u8            pib_attribute_index,
+	u8            pib_attribute_length,
+	const void   *pib_attribute_value,
+	void         *device_ref
+)
+{
+	u8 status;
+	struct mac_message command, response;
+
+	/* pre-check the validity of pib_attribute values that are not checked
+	 * in MAC
+	 */
+	if (tdme_checkpibattribute(
+		pib_attribute, pib_attribute_length, pib_attribute_value)) {
+		return IEEE802154_INVALID_PARAMETER;
+	}
+
+	if (pib_attribute == PHY_CURRENT_CHANNEL) {
+		status = tdme_channelinit(
+			*((u8 *)pib_attribute_value),
+			device_ref
+		);
+		if (status)
+			return status;
+	}
+
+	if (pib_attribute == PHY_TRANSMIT_POWER) {
+		return tdme_settxpower(
+			*((u8 *)pib_attribute_value),
+			device_ref
+		);
+	}
+
+	command.command_id = SPI_MLME_SET_REQUEST;
+	command.length = sizeof(struct mlme_set_request_pset) -
+		MAX_ATTRIBUTE_SIZE + pib_attribute_length;
+	command.pdata.set_req.pib_attribute = pib_attribute;
+	command.pdata.set_req.pib_attribute_index = pib_attribute_index;
+	command.pdata.set_req.pib_attribute_length = pib_attribute_length;
+	memcpy(
+		command.pdata.set_req.pib_attribute_value,
+		pib_attribute_value,
+		pib_attribute_length
+	);
+
+	if (cascoda_api_downstream(
+		&command.command_id,
+		command.length + 2,
+		&response.command_id,
+		device_ref)) {
+		return IEEE802154_SYSTEM_ERROR;
+	}
+
+	if (response.command_id != SPI_MLME_SET_CONFIRM)
+		return IEEE802154_SYSTEM_ERROR;
+
+	return response.pdata.status;
+}
+
+/**
+ * hwme_set_request_sync() - HWME_SET_request/confirm according to API Spec
+ * @hw_attribute:        Attribute Number
+ * @hw_attribute_length: Attribute length
+ * @hw_attribute_value:  Pointer to Attribute Value
+ * @device_ref:          Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of HWME-SET.confirm
+ */
+static u8 hwme_set_request_sync(
+	u8           hw_attribute,
+	u8           hw_attribute_length,
+	u8          *hw_attribute_value,
+	void        *device_ref
+)
+{
+	struct mac_message command, response;
+
+	command.command_id = SPI_HWME_SET_REQUEST;
+	command.length = 2 + hw_attribute_length;
+	command.pdata.hwme_set_req.hw_attribute = hw_attribute;
+	command.pdata.hwme_set_req.hw_attribute_length = hw_attribute_length;
+	memcpy(
+		command.pdata.hwme_set_req.hw_attribute_value,
+		hw_attribute_value,
+		hw_attribute_length
+	);
+
+	if (cascoda_api_downstream(
+		&command.command_id,
+		command.length + 2,
+		&response.command_id,
+		device_ref)) {
+		return IEEE802154_SYSTEM_ERROR;
+	}
+
+	if (response.command_id != SPI_HWME_SET_CONFIRM)
+		return IEEE802154_SYSTEM_ERROR;
+
+	return response.pdata.hwme_set_cnf.status;
+}
+
+/**
+ * hwme_get_request_sync() - HWME_GET_request/confirm according to API Spec
+ * @hw_attribute:        Attribute Number
+ * @hw_attribute_length: Attribute length
+ * @hw_attribute_value:  Pointer to Attribute Value
+ * @device_ref:          Nondescript pointer to target device
+ *
+ * Return: 802.15.4 status code of HWME-GET.confirm
+ */
+static u8 hwme_get_request_sync(
+	u8           hw_attribute,
+	u8          *hw_attribute_length,
+	u8          *hw_attribute_value,
+	void        *device_ref
+)
+{
+	struct mac_message command, response;
+
+	command.command_id = SPI_HWME_GET_REQUEST;
+	command.length = 1;
+	command.pdata.hwme_get_req.hw_attribute = hw_attribute;
+
+	if (cascoda_api_downstream(
+		&command.command_id,
+		command.length + 2,
+		&response.command_id,
+		device_ref)) {
+		return IEEE802154_SYSTEM_ERROR;
+	}
+
+	if (response.command_id != SPI_HWME_GET_CONFIRM)
+		return IEEE802154_SYSTEM_ERROR;
+
+	if (response.pdata.hwme_get_cnf.status == IEEE802154_SUCCESS) {
+		*hw_attribute_length =
+			response.pdata.hwme_get_cnf.hw_attribute_length;
+		memcpy(
+			hw_attribute_value,
+			response.pdata.hwme_get_cnf.hw_attribute_value,
+			*hw_attribute_length
+		);
+	}
+
+	return response.pdata.hwme_get_cnf.status;
+}
+
+/* Network driver operation */
+
+/**
+ * ca8210_async_xmit_complete() - Called to announce that an asynchronous
+ *                                transmission has finished
+ * @hw:          ieee802154_hw of ca8210 that has finished exchange
+ * @msduhandle:  Identifier of transmission that has completed
+ * @status:      Returned 802.15.4 status code of the transmission
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_async_xmit_complete(
+	struct ieee802154_hw  *hw,
+	u8                     msduhandle,
+	u8                     status)
+{
+	struct ca8210_priv *priv = hw->priv;
+
+	if (priv->nextmsduhandle != msduhandle) {
+		dev_err(
+			&priv->spi->dev,
+			"Unexpected msdu_handle on data confirm, Expected %d, got %d\n",
+			priv->nextmsduhandle,
+			msduhandle
+		);
+		return -EIO;
+	}
+
+	priv->async_tx_pending = false;
+	priv->nextmsduhandle++;
+
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"Link transmission unsuccessful, status = %d\n",
+			status
+		);
+		if (status != IEEE802154_TRANSACTION_OVERFLOW) {
+			ieee802154_xmit_error(priv->hw, priv->tx_skb, status);
+			return 0;
+		}
+	}
+	ieee802154_xmit_complete(priv->hw, priv->tx_skb, true);
+
+	return 0;
+}
+
+/**
+ * ca8210_skb_rx() - Contructs a properly framed socket buffer from a received
+ *                   MCPS_DATA_indication
+ * @hw:        ieee802154_hw that MCPS_DATA_indication was received by
+ * @len:       length of MCPS_DATA_indication
+ * @data_ind:  Octet array of MCPS_DATA_indication
+ *
+ * Called by the spi driver whenever a SAP command is received, this function
+ * will ascertain whether the command is of interest to the network driver and
+ * take necessary action.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_skb_rx(
+	struct ieee802154_hw  *hw,
+	size_t                 len,
+	u8                    *data_ind
+)
+{
+	struct ieee802154_hdr hdr;
+	int msdulen;
+	int hlen;
+	u8 mpdulinkquality = data_ind[23];
+	struct sk_buff *skb;
+	struct ca8210_priv *priv = hw->priv;
+
+	/* Allocate mtu size buffer for every rx packet */
+	skb = dev_alloc_skb(IEEE802154_MTU + sizeof(hdr));
+	if (!skb)
+		return -ENOMEM;
+
+	skb_reserve(skb, sizeof(hdr));
+
+	msdulen = data_ind[22]; /* msdu_length */
+	if (msdulen > IEEE802154_MTU) {
+		dev_err(
+			&priv->spi->dev,
+			"received erroneously large msdu length!\n"
+		);
+		kfree_skb(skb);
+		return -EMSGSIZE;
+	}
+	dev_dbg(&priv->spi->dev, "skb buffer length = %d\n", msdulen);
+
+	if (priv->promiscuous)
+		goto copy_payload;
+
+	/* Populate hdr */
+	hdr.sec.level = data_ind[29 + msdulen];
+	dev_dbg(&priv->spi->dev, "security level: %#03x\n", hdr.sec.level);
+	if (hdr.sec.level > 0) {
+		hdr.sec.key_id_mode = data_ind[30 + msdulen];
+		memcpy(&hdr.sec.extended_src, &data_ind[31 + msdulen], 8);
+		hdr.sec.key_id = data_ind[39 + msdulen];
+	}
+	hdr.source.mode = data_ind[0];
+	dev_dbg(&priv->spi->dev, "srcAddrMode: %#03x\n", hdr.source.mode);
+	hdr.source.pan_id = *(u16 *)&data_ind[1];
+	dev_dbg(&priv->spi->dev, "srcPanId: %#06x\n", hdr.source.pan_id);
+	memcpy(&hdr.source.extended_addr, &data_ind[3], 8);
+	hdr.dest.mode = data_ind[11];
+	dev_dbg(&priv->spi->dev, "dstAddrMode: %#03x\n", hdr.dest.mode);
+	hdr.dest.pan_id = *(u16 *)&data_ind[12];
+	dev_dbg(&priv->spi->dev, "dstPanId: %#06x\n", hdr.dest.pan_id);
+	memcpy(&hdr.dest.extended_addr, &data_ind[14], 8);
+
+	/* Fill in FC implicitly */
+	hdr.fc.type = 1; /* Data frame */
+	if (hdr.sec.level)
+		hdr.fc.security_enabled = 1;
+	else
+		hdr.fc.security_enabled = 0;
+	if (data_ind[1] != data_ind[12] || data_ind[2] != data_ind[13])
+		hdr.fc.intra_pan = 1;
+	else
+		hdr.fc.intra_pan = 0;
+	hdr.fc.dest_addr_mode = hdr.dest.mode;
+	hdr.fc.source_addr_mode = hdr.source.mode;
+
+	/* Add hdr to front of buffer */
+	hlen = ieee802154_hdr_push(skb, &hdr);
+
+	if (hlen < 0) {
+		dev_crit(&priv->spi->dev, "failed to push mac hdr onto skb!\n");
+		kfree_skb(skb);
+		return hlen;
+	}
+
+	skb_reset_mac_header(skb);
+	skb->mac_len = hlen;
+
+copy_payload:
+	/* Add <msdulen> bytes of space to the back of the buffer */
+	/* Copy msdu to skb */
+	skb_put_data(skb, &data_ind[29], msdulen);
+
+	ieee802154_rx_irqsafe(hw, skb, mpdulinkquality);
+	return 0;
+}
+
+/**
+ * ca8210_net_rx() - Acts upon received SAP commands relevant to the network
+ *                   driver
+ * @hw:       ieee802154_hw that command was received by
+ * @command:  Octet array of received command
+ * @len:      length of the received command
+ *
+ * Called by the spi driver whenever a SAP command is received, this function
+ * will ascertain whether the command is of interest to the network driver and
+ * take necessary action.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_net_rx(struct ieee802154_hw *hw, u8 *command, size_t len)
+{
+	struct ca8210_priv *priv = hw->priv;
+	unsigned long flags;
+	u8 status;
+
+	dev_dbg(&priv->spi->dev, "%s: CmdID = %d\n", __func__, command[0]);
+
+	if (command[0] == SPI_MCPS_DATA_INDICATION) {
+		/* Received data */
+		spin_lock_irqsave(&priv->lock, flags);
+		if (command[26] == priv->last_dsn) {
+			dev_dbg(
+				&priv->spi->dev,
+				"DSN %d resend received, ignoring...\n",
+				command[26]
+			);
+			spin_unlock_irqrestore(&priv->lock, flags);
+			return 0;
+		}
+		priv->last_dsn = command[26];
+		spin_unlock_irqrestore(&priv->lock, flags);
+		return ca8210_skb_rx(hw, len - 2, command + 2);
+	} else if (command[0] == SPI_MCPS_DATA_CONFIRM) {
+		status = command[3];
+		if (priv->async_tx_pending) {
+			return ca8210_async_xmit_complete(
+				hw,
+				command[2],
+				status
+			);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * ca8210_skb_tx() - Transmits a given socket buffer using the ca8210
+ * @skb:         Socket buffer to transmit
+ * @msduhandle:  Data identifier to pass to the 802.15.4 MAC
+ * @priv:        Pointer to private data section of target ca8210
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_skb_tx(
+	struct sk_buff      *skb,
+	u8                   msduhandle,
+	struct ca8210_priv  *priv
+)
+{
+	struct ieee802154_hdr header = { };
+	struct secspec secspec;
+	int mac_len, status;
+
+	dev_dbg(&priv->spi->dev, "%s called\n", __func__);
+
+	/* Get addressing info from skb - ieee802154 layer creates a full
+	 * packet
+	 */
+	mac_len = ieee802154_hdr_peek_addrs(skb, &header);
+	if (mac_len < 0)
+		return mac_len;
+
+	secspec.security_level = header.sec.level;
+	secspec.key_id_mode = header.sec.key_id_mode;
+	if (secspec.key_id_mode == 2)
+		memcpy(secspec.key_source, &header.sec.short_src, 4);
+	else if (secspec.key_id_mode == 3)
+		memcpy(secspec.key_source, &header.sec.extended_src, 8);
+	secspec.key_index = header.sec.key_id;
+
+	/* Pass to Cascoda API */
+	status =  mcps_data_request(
+		header.source.mode,
+		header.dest.mode,
+		header.dest.pan_id,
+		(union macaddr *)&header.dest.extended_addr,
+		skb->len - mac_len,
+		&skb->data[mac_len],
+		msduhandle,
+		header.fc.ack_request,
+		&secspec,
+		priv->spi
+	);
+	return link_to_linux_err(status);
+}
+
+/**
+ * ca8210_start() - Starts the network driver
+ * @hw:  ieee802154_hw of ca8210 being started
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_start(struct ieee802154_hw *hw)
+{
+	int status;
+	u8 rx_on_when_idle;
+	u8 lqi_threshold = 0;
+	struct ca8210_priv *priv = hw->priv;
+
+	priv->last_dsn = -1;
+	/* Turn receiver on when idle for now just to test rx */
+	rx_on_when_idle = 1;
+	status = mlme_set_request_sync(
+		MAC_RX_ON_WHEN_IDLE,
+		0,
+		1,
+		&rx_on_when_idle,
+		priv->spi
+	);
+	if (status) {
+		dev_crit(
+			&priv->spi->dev,
+			"Setting rx_on_when_idle failed, status = %d\n",
+			status
+		);
+		return link_to_linux_err(status);
+	}
+	status = hwme_set_request_sync(
+		HWME_LQILIMIT,
+		1,
+		&lqi_threshold,
+		priv->spi
+	);
+	if (status) {
+		dev_crit(
+			&priv->spi->dev,
+			"Setting lqilimit failed, status = %d\n",
+			status
+		);
+		return link_to_linux_err(status);
+	}
+
+	return 0;
+}
+
+/**
+ * ca8210_stop() - Stops the network driver
+ * @hw:  ieee802154_hw of ca8210 being stopped
+ *
+ * Return: 0 or linux error code
+ */
+static void ca8210_stop(struct ieee802154_hw *hw)
+{
+}
+
+/**
+ * ca8210_xmit_async() - Asynchronously transmits a given socket buffer using
+ *                       the ca8210
+ * @hw:   ieee802154_hw of ca8210 to transmit from
+ * @skb:  Socket buffer to transmit
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_xmit_async(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct ca8210_priv *priv = hw->priv;
+	int status;
+
+	dev_dbg(&priv->spi->dev, "calling %s\n", __func__);
+
+	priv->tx_skb = skb;
+	priv->async_tx_pending = true;
+	status = ca8210_skb_tx(skb, priv->nextmsduhandle, priv);
+	return status;
+}
+
+/**
+ * ca8210_get_ed() - Returns the measured energy on the current channel at this
+ *                   instant in time
+ * @hw:     ieee802154_hw of target ca8210
+ * @level:  Measured Energy Detect level
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_get_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	u8 lenvar;
+	struct ca8210_priv *priv = hw->priv;
+
+	return link_to_linux_err(
+		hwme_get_request_sync(HWME_EDVALUE, &lenvar, level, priv->spi)
+	);
+}
+
+/**
+ * ca8210_set_channel() - Sets the current operating 802.15.4 channel of the
+ *                        ca8210
+ * @hw:       ieee802154_hw of target ca8210
+ * @page:     Channel page to set
+ * @channel:  Channel number to set
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_set_channel(
+	struct ieee802154_hw  *hw,
+	u8                     page,
+	u8                     channel
+)
+{
+	u8 status;
+	struct ca8210_priv *priv = hw->priv;
+
+	status = mlme_set_request_sync(
+		PHY_CURRENT_CHANNEL,
+		0,
+		1,
+		&channel,
+		priv->spi
+	);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting channel, MLME-SET.confirm status = %d\n",
+			status
+		);
+	}
+	return link_to_linux_err(status);
+}
+
+/**
+ * ca8210_set_hw_addr_filt() - Sets the address filtering parameters of the
+ *                             ca8210
+ * @hw:       ieee802154_hw of target ca8210
+ * @filt:     Filtering parameters
+ * @changed:  Bitmap representing which parameters to change
+ *
+ * Effectively just sets the actual addressing information identifying this node
+ * as all filtering is performed by the ca8210 as detailed in the IEEE 802.15.4
+ * 2006 specification.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_set_hw_addr_filt(
+	struct ieee802154_hw            *hw,
+	struct ieee802154_hw_addr_filt  *filt,
+	unsigned long                    changed
+)
+{
+	u8 status = 0;
+	struct ca8210_priv *priv = hw->priv;
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		status = mlme_set_request_sync(
+			MAC_PAN_ID,
+			0,
+			2,
+			&filt->pan_id, priv->spi
+		);
+		if (status) {
+			dev_err(
+				&priv->spi->dev,
+				"error setting pan id, MLME-SET.confirm status = %d",
+				status
+			);
+			return link_to_linux_err(status);
+		}
+	}
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		status = mlme_set_request_sync(
+			MAC_SHORT_ADDRESS,
+			0,
+			2,
+			&filt->short_addr, priv->spi
+		);
+		if (status) {
+			dev_err(
+				&priv->spi->dev,
+				"error setting short address, MLME-SET.confirm status = %d",
+				status
+			);
+			return link_to_linux_err(status);
+		}
+	}
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		status = mlme_set_request_sync(
+			NS_IEEE_ADDRESS,
+			0,
+			8,
+			&filt->ieee_addr,
+			priv->spi
+		);
+		if (status) {
+			dev_err(
+				&priv->spi->dev,
+				"error setting ieee address, MLME-SET.confirm status = %d",
+				status
+			);
+			return link_to_linux_err(status);
+		}
+	}
+	/* TODO: Should use MLME_START to set coord bit? */
+	return 0;
+}
+
+/**
+ * ca8210_set_tx_power() - Sets the transmit power of the ca8210
+ * @hw:   ieee802154_hw of target ca8210
+ * @mbm:  Transmit power in mBm (dBm*100)
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_set_tx_power(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct ca8210_priv *priv = hw->priv;
+
+	mbm /= 100;
+	return link_to_linux_err(
+		mlme_set_request_sync(PHY_TRANSMIT_POWER, 0, 1, &mbm, priv->spi)
+	);
+}
+
+/**
+ * ca8210_set_cca_mode() - Sets the clear channel assessment mode of the ca8210
+ * @hw:   ieee802154_hw of target ca8210
+ * @cca:  CCA mode to set
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_set_cca_mode(
+	struct ieee802154_hw       *hw,
+	const struct wpan_phy_cca  *cca
+)
+{
+	u8 status;
+	u8 cca_mode;
+	struct ca8210_priv *priv = hw->priv;
+
+	cca_mode = cca->mode & 3;
+	if (cca_mode == 3 && cca->opt == NL802154_CCA_OPT_ENERGY_CARRIER_OR) {
+		/* cca_mode 0 == CS OR ED, 3 == CS AND ED */
+		cca_mode = 0;
+	}
+	status = mlme_set_request_sync(
+		PHY_CCA_MODE,
+		0,
+		1,
+		&cca_mode,
+		priv->spi
+	);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting cca mode, MLME-SET.confirm status = %d",
+			status
+		);
+	}
+	return link_to_linux_err(status);
+}
+
+/**
+ * ca8210_set_cca_ed_level() - Sets the CCA ED level of the ca8210
+ * @hw:     ieee802154_hw of target ca8210
+ * @level:  ED level to set (in mbm)
+ *
+ * Sets the minimum threshold of measured energy above which the ca8210 will
+ * back off and retry a transmission.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_set_cca_ed_level(struct ieee802154_hw *hw, s32 level)
+{
+	u8 status;
+	u8 ed_threshold = (level / 100) * 2 + 256;
+	struct ca8210_priv *priv = hw->priv;
+
+	status = hwme_set_request_sync(
+		HWME_EDTHRESHOLD,
+		1,
+		&ed_threshold,
+		priv->spi
+	);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting ed threshold, HWME-SET.confirm status = %d",
+			status
+		);
+	}
+	return link_to_linux_err(status);
+}
+
+/**
+ * ca8210_set_csma_params() - Sets the CSMA parameters of the ca8210
+ * @hw:       ieee802154_hw of target ca8210
+ * @min_be:   Minimum backoff exponent when backing off a transmission
+ * @max_be:   Maximum backoff exponent when backing off a transmission
+ * @retries:  Number of times to retry after backing off
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_set_csma_params(
+	struct ieee802154_hw  *hw,
+	u8                     min_be,
+	u8                     max_be,
+	u8                     retries
+)
+{
+	u8 status;
+	struct ca8210_priv *priv = hw->priv;
+
+	status = mlme_set_request_sync(MAC_MIN_BE, 0, 1, &min_be, priv->spi);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting min be, MLME-SET.confirm status = %d",
+			status
+		);
+		return link_to_linux_err(status);
+	}
+	status = mlme_set_request_sync(MAC_MAX_BE, 0, 1, &max_be, priv->spi);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting max be, MLME-SET.confirm status = %d",
+			status
+		);
+		return link_to_linux_err(status);
+	}
+	status = mlme_set_request_sync(
+		MAC_MAX_CSMA_BACKOFFS,
+		0,
+		1,
+		&retries,
+		priv->spi
+	);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting max csma backoffs, MLME-SET.confirm status = %d",
+			status
+		);
+	}
+	return link_to_linux_err(status);
+}
+
+/**
+ * ca8210_set_frame_retries() - Sets the maximum frame retries of the ca8210
+ * @hw:       ieee802154_hw of target ca8210
+ * @retries:  Number of retries
+ *
+ * Sets the number of times to retry a transmission if no acknowledgment was
+ * received from the other end when one was requested.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
+{
+	u8 status;
+	struct ca8210_priv *priv = hw->priv;
+
+	status = mlme_set_request_sync(
+		MAC_MAX_FRAME_RETRIES,
+		0,
+		1,
+		&retries,
+		priv->spi
+	);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting frame retries, MLME-SET.confirm status = %d",
+			status
+		);
+	}
+	return link_to_linux_err(status);
+}
+
+static int ca8210_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
+{
+	u8 status;
+	struct ca8210_priv *priv = hw->priv;
+
+	status = mlme_set_request_sync(
+		MAC_PROMISCUOUS_MODE,
+		0,
+		1,
+		(const void *)&on,
+		priv->spi
+	);
+	if (status) {
+		dev_err(
+			&priv->spi->dev,
+			"error setting promiscuous mode, MLME-SET.confirm status = %d",
+			status
+		);
+	} else {
+		priv->promiscuous = on;
+	}
+	return link_to_linux_err(status);
+}
+
+static const struct ieee802154_ops ca8210_phy_ops = {
+	.start = ca8210_start,
+	.stop = ca8210_stop,
+	.xmit_async = ca8210_xmit_async,
+	.ed = ca8210_get_ed,
+	.set_channel = ca8210_set_channel,
+	.set_hw_addr_filt = ca8210_set_hw_addr_filt,
+	.set_txpower = ca8210_set_tx_power,
+	.set_cca_mode = ca8210_set_cca_mode,
+	.set_cca_ed_level = ca8210_set_cca_ed_level,
+	.set_csma_params = ca8210_set_csma_params,
+	.set_frame_retries = ca8210_set_frame_retries,
+	.set_promiscuous_mode = ca8210_set_promiscuous_mode
+};
+
+/* Test/EVBME Interface */
+
+/**
+ * ca8210_test_int_open() - Opens the test interface to the userspace
+ * @inodp:  inode representation of file interface
+ * @filp:   file interface
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_test_int_open(struct inode *inodp, struct file *filp)
+{
+	struct ca8210_priv *priv = inodp->i_private;
+
+	filp->private_data = priv;
+	return 0;
+}
+
+/**
+ * ca8210_test_check_upstream() - Checks a command received from the upstream
+ *                                testing interface for required action
+ * @buf:        Buffer containing command to check
+ * @device_ref: Nondescript pointer to target device
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_test_check_upstream(u8 *buf, void *device_ref)
+{
+	int ret;
+	u8 response[CA8210_SPI_BUF_SIZE];
+
+	if (buf[0] == SPI_MLME_SET_REQUEST) {
+		ret = tdme_checkpibattribute(buf[2], buf[4], buf + 5);
+		if (ret) {
+			response[0]  = SPI_MLME_SET_CONFIRM;
+			response[1] = 3;
+			response[2] = IEEE802154_INVALID_PARAMETER;
+			response[3] = buf[2];
+			response[4] = buf[3];
+			if (cascoda_api_upstream)
+				cascoda_api_upstream(response, 5, device_ref);
+			return ret;
+		}
+	}
+	if (buf[0] == SPI_MLME_ASSOCIATE_REQUEST) {
+		return tdme_channelinit(buf[2], device_ref);
+	} else if (buf[0] == SPI_MLME_START_REQUEST) {
+		return tdme_channelinit(buf[4], device_ref);
+	} else if (
+		(buf[0] == SPI_MLME_SET_REQUEST) &&
+		(buf[2] == PHY_CURRENT_CHANNEL)
+	) {
+		return tdme_channelinit(buf[5], device_ref);
+	} else if (
+		(buf[0] == SPI_TDME_SET_REQUEST) &&
+		(buf[2] == TDME_CHANNEL)
+	) {
+		return tdme_channelinit(buf[4], device_ref);
+	} else if (
+		(CA8210_MAC_WORKAROUNDS) &&
+		(buf[0] == SPI_MLME_RESET_REQUEST) &&
+		(buf[2] == 1)
+	) {
+		/* reset COORD Bit for Channel Filtering as Coordinator */
+		return tdme_setsfr_request_sync(
+			0,
+			CA8210_SFR_MACCON,
+			0,
+			device_ref
+		);
+	}
+	return 0;
+} /* End of EVBMECheckSerialCommand() */
+
+/**
+ * ca8210_test_int_user_write() - Called by a process in userspace to send a
+ *                                message to the ca8210 drivers
+ * @filp:    file interface
+ * @in_buf:  Buffer containing message to write
+ * @len:     length of message
+ * @off:     file offset
+ *
+ * Return: 0 or linux error code
+ */
+static ssize_t ca8210_test_int_user_write(
+	struct file        *filp,
+	const char __user  *in_buf,
+	size_t              len,
+	loff_t             *off
+)
+{
+	int ret;
+	struct ca8210_priv *priv = filp->private_data;
+	u8 command[CA8210_SPI_BUF_SIZE];
+
+	memset(command, SPI_IDLE, 6);
+	if (len > CA8210_SPI_BUF_SIZE || len < 2) {
+		dev_warn(
+			&priv->spi->dev,
+			"userspace requested erroneous write length (%zu)\n",
+			len
+		);
+		return -EBADE;
+	}
+
+	ret = copy_from_user(command, in_buf, len);
+	if (ret) {
+		dev_err(
+			&priv->spi->dev,
+			"%d bytes could not be copied from userspace\n",
+			ret
+		);
+		return -EIO;
+	}
+	if (len != command[1] + 2) {
+		dev_err(
+			&priv->spi->dev,
+			"write len does not match packet length field\n"
+		);
+		return -EBADE;
+	}
+
+	ret = ca8210_test_check_upstream(command, priv->spi);
+	if (ret == 0) {
+		ret = ca8210_spi_exchange(
+			command,
+			command[1] + 2,
+			NULL,
+			priv->spi
+		);
+		if (ret < 0) {
+			/* effectively 0 bytes were written successfully */
+			dev_err(
+				&priv->spi->dev,
+				"spi exchange failed\n"
+			);
+			return ret;
+		}
+		if (command[0] & SPI_SYN)
+			priv->sync_down++;
+	}
+
+	return len;
+}
+
+/**
+ * ca8210_test_int_user_read() - Called by a process in userspace to read a
+ *                               message from the ca8210 drivers
+ * @filp:  file interface
+ * @buf:   Buffer to write message to
+ * @len:   length of message to read (ignored)
+ * @offp:  file offset
+ *
+ * If the O_NONBLOCK flag was set when opening the file then this function will
+ * not block, i.e. it will return if the fifo is empty. Otherwise the function
+ * will block, i.e. wait until new data arrives.
+ *
+ * Return: number of bytes read
+ */
+static ssize_t ca8210_test_int_user_read(
+	struct file  *filp,
+	char __user  *buf,
+	size_t        len,
+	loff_t       *offp
+)
+{
+	int i, cmdlen;
+	struct ca8210_priv *priv = filp->private_data;
+	unsigned char *fifo_buffer;
+	unsigned long bytes_not_copied;
+
+	if (filp->f_flags & O_NONBLOCK) {
+		/* Non-blocking mode */
+		if (kfifo_is_empty(&priv->test.up_fifo))
+			return 0;
+	} else {
+		/* Blocking mode */
+		wait_event_interruptible(
+			priv->test.readq,
+			!kfifo_is_empty(&priv->test.up_fifo)
+		);
+	}
+
+	if (kfifo_out(&priv->test.up_fifo, &fifo_buffer, 4) != 4) {
+		dev_err(
+			&priv->spi->dev,
+			"test_interface: Wrong number of elements popped from upstream fifo\n"
+		);
+		return 0;
+	}
+	cmdlen = fifo_buffer[1];
+	bytes_not_copied = cmdlen + 2;
+
+	bytes_not_copied = copy_to_user(buf, fifo_buffer, bytes_not_copied);
+	if (bytes_not_copied > 0) {
+		dev_err(
+			&priv->spi->dev,
+			"%lu bytes could not be copied to user space!\n",
+			bytes_not_copied
+		);
+	}
+
+	dev_dbg(&priv->spi->dev, "test_interface: Cmd len = %d\n", cmdlen);
+
+	dev_dbg(&priv->spi->dev, "test_interface: Read\n");
+	for (i = 0; i < cmdlen + 2; i++)
+		dev_dbg(&priv->spi->dev, "%#03x\n", fifo_buffer[i]);
+
+	kfree(fifo_buffer);
+
+	return cmdlen + 2;
+}
+
+/**
+ * ca8210_test_int_ioctl() - Called by a process in userspace to enact an
+ *                           arbitrary action
+ * @filp:        file interface
+ * @ioctl_num:   which action to enact
+ * @ioctl_param: arbitrary parameter for the action
+ *
+ * Return: status
+ */
+static long ca8210_test_int_ioctl(
+	struct file *filp,
+	unsigned int ioctl_num,
+	unsigned long ioctl_param
+)
+{
+	struct ca8210_priv *priv = filp->private_data;
+
+	switch (ioctl_num) {
+	case CA8210_IOCTL_HARD_RESET:
+		ca8210_reset_send(priv->spi, ioctl_param);
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+/**
+ * ca8210_test_int_poll() - Called by a process in userspace to determine which
+ *                          actions are currently possible for the file
+ * @filp:   file interface
+ * @ptable: poll table
+ *
+ * Return: set of poll return flags
+ */
+static __poll_t ca8210_test_int_poll(
+	struct file *filp,
+	struct poll_table_struct *ptable
+)
+{
+	__poll_t return_flags = 0;
+	struct ca8210_priv *priv = filp->private_data;
+
+	poll_wait(filp, &priv->test.readq, ptable);
+	if (!kfifo_is_empty(&priv->test.up_fifo))
+		return_flags |= (EPOLLIN | EPOLLRDNORM);
+	if (wait_event_interruptible(
+		priv->test.readq,
+		!kfifo_is_empty(&priv->test.up_fifo))) {
+		return EPOLLERR;
+	}
+	return return_flags;
+}
+
+static const struct file_operations test_int_fops = {
+	.read =           ca8210_test_int_user_read,
+	.write =          ca8210_test_int_user_write,
+	.open =           ca8210_test_int_open,
+	.release =        NULL,
+	.unlocked_ioctl = ca8210_test_int_ioctl,
+	.poll =           ca8210_test_int_poll
+};
+
+/* Init/Deinit */
+
+/**
+ * ca8210_get_platform_data() - Populate a ca8210_platform_data object
+ * @spi_device:  Pointer to ca8210 spi device object to get data for
+ * @pdata:       Pointer to ca8210_platform_data object to populate
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_get_platform_data(
+	struct spi_device *spi_device,
+	struct ca8210_platform_data *pdata
+)
+{
+	int ret = 0;
+
+	if (!spi_device->dev.of_node)
+		return -EINVAL;
+
+	pdata->extclockenable = of_property_read_bool(
+		spi_device->dev.of_node,
+		"extclock-enable"
+	);
+	if (pdata->extclockenable) {
+		ret = of_property_read_u32(
+			spi_device->dev.of_node,
+			"extclock-freq",
+			&pdata->extclockfreq
+		);
+		if (ret < 0)
+			return ret;
+
+		ret = of_property_read_u32(
+			spi_device->dev.of_node,
+			"extclock-gpio",
+			&pdata->extclockgpio
+		);
+	}
+
+	return ret;
+}
+
+/**
+ * ca8210_config_extern_clk() - Configure the external clock provided by the
+ *                              ca8210
+ * @pdata:  Pointer to ca8210_platform_data containing clock parameters
+ * @spi:    Pointer to target ca8210 spi device
+ * @on:	    True to turn the clock on, false to turn off
+ *
+ * The external clock is configured with a frequency and output pin taken from
+ * the platform data.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_config_extern_clk(
+	struct ca8210_platform_data *pdata,
+	struct spi_device *spi,
+	bool on
+)
+{
+	u8 clkparam[2];
+
+	if (on) {
+		dev_info(&spi->dev, "Switching external clock on\n");
+		switch (pdata->extclockfreq) {
+		case SIXTEEN_MHZ:
+			clkparam[0] = 1;
+			break;
+		case EIGHT_MHZ:
+			clkparam[0] = 2;
+			break;
+		case FOUR_MHZ:
+			clkparam[0] = 3;
+			break;
+		case TWO_MHZ:
+			clkparam[0] = 4;
+			break;
+		case ONE_MHZ:
+			clkparam[0] = 5;
+			break;
+		default:
+			dev_crit(&spi->dev, "Invalid extclock-freq\n");
+			return -EINVAL;
+		}
+		clkparam[1] = pdata->extclockgpio;
+	} else {
+		dev_info(&spi->dev, "Switching external clock off\n");
+		clkparam[0] = 0; /* off */
+		clkparam[1] = 0;
+	}
+	return link_to_linux_err(
+		hwme_set_request_sync(HWME_SYSCLKOUT, 2, clkparam, spi)
+	);
+}
+
+/**
+ * ca8210_register_ext_clock() - Register ca8210's external clock with kernel
+ * @spi:  Pointer to target ca8210 spi device
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_register_ext_clock(struct spi_device *spi)
+{
+	struct device_node *np = spi->dev.of_node;
+	struct ca8210_priv *priv = spi_get_drvdata(spi);
+	struct ca8210_platform_data *pdata = spi->dev.platform_data;
+
+	if (!np)
+		return -EFAULT;
+
+	priv->clk = clk_register_fixed_rate(
+		&spi->dev,
+		np->name,
+		NULL,
+		0,
+		pdata->extclockfreq
+	);
+
+	if (IS_ERR(priv->clk)) {
+		dev_crit(&spi->dev, "Failed to register external clk\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	return of_clk_add_provider(np, of_clk_src_simple_get, priv->clk);
+}
+
+/**
+ * ca8210_unregister_ext_clock() - Unregister ca8210's external clock with
+ *                                 kernel
+ * @spi:  Pointer to target ca8210 spi device
+ */
+static void ca8210_unregister_ext_clock(struct spi_device *spi)
+{
+	struct ca8210_priv *priv = spi_get_drvdata(spi);
+
+	if (IS_ERR_OR_NULL(priv->clk))
+		return;
+
+	of_clk_del_provider(spi->dev.of_node);
+	clk_unregister(priv->clk);
+	dev_info(&spi->dev, "External clock unregistered\n");
+}
+
+/**
+ * ca8210_reset_init() - Initialise the reset input to the ca8210
+ * @spi:  Pointer to target ca8210 spi device
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_reset_init(struct spi_device *spi)
+{
+	int ret;
+	struct ca8210_platform_data *pdata = spi->dev.platform_data;
+
+	pdata->gpio_reset = of_get_named_gpio(
+		spi->dev.of_node,
+		"reset-gpio",
+		0
+	);
+
+	ret = gpio_direction_output(pdata->gpio_reset, 1);
+	if (ret < 0) {
+		dev_crit(
+			&spi->dev,
+			"Reset GPIO %d did not set to output mode\n",
+			pdata->gpio_reset
+		);
+	}
+
+	return ret;
+}
+
+/**
+ * ca8210_interrupt_init() - Initialise the irq output from the ca8210
+ * @spi:  Pointer to target ca8210 spi device
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_interrupt_init(struct spi_device *spi)
+{
+	int ret;
+	struct ca8210_platform_data *pdata = spi->dev.platform_data;
+
+	pdata->gpio_irq = of_get_named_gpio(
+		spi->dev.of_node,
+		"irq-gpio",
+		0
+	);
+
+	pdata->irq_id = gpio_to_irq(pdata->gpio_irq);
+	if (pdata->irq_id < 0) {
+		dev_crit(
+			&spi->dev,
+			"Could not get irq for gpio pin %d\n",
+			pdata->gpio_irq
+		);
+		gpio_free(pdata->gpio_irq);
+		return pdata->irq_id;
+	}
+
+	ret = request_irq(
+		pdata->irq_id,
+		ca8210_interrupt_handler,
+		IRQF_TRIGGER_FALLING,
+		"ca8210-irq",
+		spi_get_drvdata(spi)
+	);
+	if (ret) {
+		dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id);
+		gpio_unexport(pdata->gpio_irq);
+		gpio_free(pdata->gpio_irq);
+	}
+
+	return ret;
+}
+
+/**
+ * ca8210_dev_com_init() - Initialise the spi communication component
+ * @priv:  Pointer to private data structure
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_dev_com_init(struct ca8210_priv *priv)
+{
+	priv->mlme_workqueue = alloc_ordered_workqueue(
+		"MLME work queue",
+		WQ_UNBOUND
+	);
+	if (!priv->mlme_workqueue) {
+		dev_crit(&priv->spi->dev, "alloc of mlme_workqueue failed!\n");
+		return -ENOMEM;
+	}
+
+	priv->irq_workqueue = alloc_ordered_workqueue(
+		"ca8210 irq worker",
+		WQ_UNBOUND
+	);
+	if (!priv->irq_workqueue) {
+		dev_crit(&priv->spi->dev, "alloc of irq_workqueue failed!\n");
+		destroy_workqueue(priv->mlme_workqueue);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/**
+ * ca8210_dev_com_clear() - Deinitialise the spi communication component
+ * @priv:  Pointer to private data structure
+ */
+static void ca8210_dev_com_clear(struct ca8210_priv *priv)
+{
+	destroy_workqueue(priv->mlme_workqueue);
+	destroy_workqueue(priv->irq_workqueue);
+}
+
+#define CA8210_MAX_TX_POWERS (9)
+static const s32 ca8210_tx_powers[CA8210_MAX_TX_POWERS] = {
+	800, 700, 600, 500, 400, 300, 200, 100, 0
+};
+
+#define CA8210_MAX_ED_LEVELS (21)
+static const s32 ca8210_ed_levels[CA8210_MAX_ED_LEVELS] = {
+	-10300, -10250, -10200, -10150, -10100, -10050, -10000, -9950, -9900,
+	-9850, -9800, -9750, -9700, -9650, -9600, -9550, -9500, -9450, -9400,
+	-9350, -9300
+};
+
+/**
+ * ca8210_hw_setup() - Populate the ieee802154_hw phy attributes with the
+ *                     ca8210's defaults
+ * @ca8210_hw:  Pointer to ieee802154_hw to populate
+ */
+static void ca8210_hw_setup(struct ieee802154_hw *ca8210_hw)
+{
+	/* Support channels 11-26 */
+	ca8210_hw->phy->supported.channels[0] = CA8210_VALID_CHANNELS;
+	ca8210_hw->phy->supported.tx_powers_size = CA8210_MAX_TX_POWERS;
+	ca8210_hw->phy->supported.tx_powers = ca8210_tx_powers;
+	ca8210_hw->phy->supported.cca_ed_levels_size = CA8210_MAX_ED_LEVELS;
+	ca8210_hw->phy->supported.cca_ed_levels = ca8210_ed_levels;
+	ca8210_hw->phy->current_channel = 18;
+	ca8210_hw->phy->current_page = 0;
+	ca8210_hw->phy->transmit_power = 800;
+	ca8210_hw->phy->cca.mode = NL802154_CCA_ENERGY_CARRIER;
+	ca8210_hw->phy->cca.opt = NL802154_CCA_OPT_ENERGY_CARRIER_AND;
+	ca8210_hw->phy->cca_ed_level = -9800;
+	ca8210_hw->phy->symbol_duration = 16;
+	ca8210_hw->phy->lifs_period = 40 * ca8210_hw->phy->symbol_duration;
+	ca8210_hw->phy->sifs_period = 12 * ca8210_hw->phy->symbol_duration;
+	ca8210_hw->flags =
+		IEEE802154_HW_AFILT |
+		IEEE802154_HW_OMIT_CKSUM |
+		IEEE802154_HW_FRAME_RETRIES |
+		IEEE802154_HW_PROMISCUOUS |
+		IEEE802154_HW_CSMA_PARAMS;
+	ca8210_hw->phy->flags =
+		WPAN_PHY_FLAG_TXPOWER |
+		WPAN_PHY_FLAG_CCA_ED_LEVEL |
+		WPAN_PHY_FLAG_CCA_MODE;
+}
+
+/**
+ * ca8210_test_interface_init() - Initialise the test file interface
+ * @priv:  Pointer to private data structure
+ *
+ * Provided as an alternative to the standard linux network interface, the test
+ * interface exposes a file in the filesystem (ca8210_test) that allows
+ * 802.15.4 SAP Commands and Cascoda EVBME commands to be sent directly to
+ * the stack.
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_test_interface_init(struct ca8210_priv *priv)
+{
+	struct ca8210_test *test = &priv->test;
+	char node_name[32];
+
+	snprintf(
+		node_name,
+		sizeof(node_name),
+		"ca8210@%d_%d",
+		priv->spi->master->bus_num,
+		priv->spi->chip_select
+	);
+
+	test->ca8210_dfs_spi_int = debugfs_create_file(
+		node_name,
+		0600, /* S_IRUSR | S_IWUSR */
+		NULL,
+		priv,
+		&test_int_fops
+	);
+
+	debugfs_create_symlink("ca8210", NULL, node_name);
+	init_waitqueue_head(&test->readq);
+	return kfifo_alloc(
+		&test->up_fifo,
+		CA8210_TEST_INT_FIFO_SIZE,
+		GFP_KERNEL
+	);
+}
+
+/**
+ * ca8210_test_interface_clear() - Deinitialise the test file interface
+ * @priv:  Pointer to private data structure
+ */
+static void ca8210_test_interface_clear(struct ca8210_priv *priv)
+{
+	struct ca8210_test *test = &priv->test;
+
+	debugfs_remove(test->ca8210_dfs_spi_int);
+	kfifo_free(&test->up_fifo);
+	dev_info(&priv->spi->dev, "Test interface removed\n");
+}
+
+/**
+ * ca8210_remove() - Shut down a ca8210 upon being disconnected
+ * @spi_device:  Pointer to spi device data structure
+ *
+ * Return: 0 or linux error code
+ */
+static void ca8210_remove(struct spi_device *spi_device)
+{
+	struct ca8210_priv *priv;
+	struct ca8210_platform_data *pdata;
+
+	dev_info(&spi_device->dev, "Removing ca8210\n");
+
+	pdata = spi_device->dev.platform_data;
+	if (pdata) {
+		if (pdata->extclockenable) {
+			ca8210_unregister_ext_clock(spi_device);
+			ca8210_config_extern_clk(pdata, spi_device, 0);
+		}
+		free_irq(pdata->irq_id, spi_device->dev.driver_data);
+		kfree(pdata);
+		spi_device->dev.platform_data = NULL;
+	}
+	/* get spi_device private data */
+	priv = spi_get_drvdata(spi_device);
+	if (priv) {
+		dev_info(
+			&spi_device->dev,
+			"sync_down = %d, sync_up = %d\n",
+			priv->sync_down,
+			priv->sync_up
+		);
+		ca8210_dev_com_clear(spi_device->dev.driver_data);
+		if (priv->hw) {
+			if (priv->hw_registered)
+				ieee802154_unregister_hw(priv->hw);
+			ieee802154_free_hw(priv->hw);
+			priv->hw = NULL;
+			dev_info(
+				&spi_device->dev,
+				"Unregistered & freed ieee802154_hw.\n"
+			);
+		}
+		if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS))
+			ca8210_test_interface_clear(priv);
+	}
+}
+
+/**
+ * ca8210_probe() - Set up a connected ca8210 upon being detected by the system
+ * @spi_device:  Pointer to spi device data structure
+ *
+ * Return: 0 or linux error code
+ */
+static int ca8210_probe(struct spi_device *spi_device)
+{
+	struct ca8210_priv *priv;
+	struct ieee802154_hw *hw;
+	struct ca8210_platform_data *pdata;
+	int ret;
+
+	dev_info(&spi_device->dev, "Inserting ca8210\n");
+
+	/* allocate ieee802154_hw and private data */
+	hw = ieee802154_alloc_hw(sizeof(struct ca8210_priv), &ca8210_phy_ops);
+	if (!hw) {
+		dev_crit(&spi_device->dev, "ieee802154_alloc_hw failed\n");
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	priv = hw->priv;
+	priv->hw = hw;
+	priv->spi = spi_device;
+	hw->parent = &spi_device->dev;
+	spin_lock_init(&priv->lock);
+	priv->async_tx_pending = false;
+	priv->hw_registered = false;
+	priv->sync_up = 0;
+	priv->sync_down = 0;
+	priv->promiscuous = false;
+	priv->retries = 0;
+	init_completion(&priv->ca8210_is_awake);
+	init_completion(&priv->spi_transfer_complete);
+	init_completion(&priv->sync_exchange_complete);
+	spi_set_drvdata(priv->spi, priv);
+	if (IS_ENABLED(CONFIG_IEEE802154_CA8210_DEBUGFS)) {
+		cascoda_api_upstream = ca8210_test_int_driver_write;
+		ca8210_test_interface_init(priv);
+	} else {
+		cascoda_api_upstream = NULL;
+	}
+	ca8210_hw_setup(hw);
+	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
+
+	pdata = kmalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	priv->spi->dev.platform_data = pdata;
+	ret = ca8210_get_platform_data(priv->spi, pdata);
+	if (ret) {
+		dev_crit(&spi_device->dev, "ca8210_get_platform_data failed\n");
+		goto error;
+	}
+
+	ret = ca8210_dev_com_init(priv);
+	if (ret) {
+		dev_crit(&spi_device->dev, "ca8210_dev_com_init failed\n");
+		goto error;
+	}
+	ret = ca8210_reset_init(priv->spi);
+	if (ret) {
+		dev_crit(&spi_device->dev, "ca8210_reset_init failed\n");
+		goto error;
+	}
+
+	ret = ca8210_interrupt_init(priv->spi);
+	if (ret) {
+		dev_crit(&spi_device->dev, "ca8210_interrupt_init failed\n");
+		goto error;
+	}
+
+	msleep(100);
+
+	ca8210_reset_send(priv->spi, 1);
+
+	ret = tdme_chipinit(priv->spi);
+	if (ret) {
+		dev_crit(&spi_device->dev, "tdme_chipinit failed\n");
+		goto error;
+	}
+
+	if (pdata->extclockenable) {
+		ret = ca8210_config_extern_clk(pdata, priv->spi, 1);
+		if (ret) {
+			dev_crit(
+				&spi_device->dev,
+				"ca8210_config_extern_clk failed\n"
+			);
+			goto error;
+		}
+		ret = ca8210_register_ext_clock(priv->spi);
+		if (ret) {
+			dev_crit(
+				&spi_device->dev,
+				"ca8210_register_ext_clock failed\n"
+			);
+			goto error;
+		}
+	}
+
+	ret = ieee802154_register_hw(hw);
+	if (ret) {
+		dev_crit(&spi_device->dev, "ieee802154_register_hw failed\n");
+		goto error;
+	}
+	priv->hw_registered = true;
+
+	return 0;
+error:
+	msleep(100); /* wait for pending spi transfers to complete */
+	ca8210_remove(spi_device);
+	return link_to_linux_err(ret);
+}
+
+static const struct of_device_id ca8210_of_ids[] = {
+	{.compatible = "cascoda,ca8210", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ca8210_of_ids);
+
+static struct spi_driver ca8210_spi_driver = {
+	.driver = {
+		.name =                 DRIVER_NAME,
+		.owner =                THIS_MODULE,
+		.of_match_table =       of_match_ptr(ca8210_of_ids),
+	},
+	.probe  =                       ca8210_probe,
+	.remove =                       ca8210_remove
+};
+
+module_spi_driver(ca8210_spi_driver);
+
+MODULE_AUTHOR("Harry Morris <h.morris@cascoda.com>");
+MODULE_DESCRIPTION("CA-8210 SoftMAC driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION("1.0");
diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
new file mode 100644
index 000000000..edc769daa
--- /dev/null
+++ b/drivers/net/ieee802154/cc2520.c
@@ -0,0 +1,1254 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Driver for TI CC2520 802.15.4 Wireless-PAN Networking controller
+ *
+ * Copyright (C) 2014 Varka Bhadram <varkab@cdac.in>
+ *		      Md.Jamal Mohiuddin <mjmohiuddin@cdac.in>
+ *		      P Sowjanya <sowjanyap@cdac.in>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/cc2520.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/skbuff.h>
+#include <linux/of_gpio.h>
+#include <linux/ieee802154.h>
+#include <linux/crc-ccitt.h>
+#include <asm/unaligned.h>
+
+#include <net/mac802154.h>
+#include <net/cfg802154.h>
+
+#define	SPI_COMMAND_BUFFER	3
+#define	HIGH			1
+#define	LOW			0
+#define	STATE_IDLE		0
+#define	RSSI_VALID		0
+#define	RSSI_OFFSET		78
+
+#define	CC2520_RAM_SIZE		640
+#define	CC2520_FIFO_SIZE	128
+
+#define	CC2520RAM_TXFIFO	0x100
+#define	CC2520RAM_RXFIFO	0x180
+#define	CC2520RAM_IEEEADDR	0x3EA
+#define	CC2520RAM_PANID		0x3F2
+#define	CC2520RAM_SHORTADDR	0x3F4
+
+#define	CC2520_FREG_MASK	0x3F
+
+/* status byte values */
+#define	CC2520_STATUS_XOSC32M_STABLE	BIT(7)
+#define	CC2520_STATUS_RSSI_VALID	BIT(6)
+#define	CC2520_STATUS_TX_UNDERFLOW	BIT(3)
+
+/* IEEE-802.15.4 defined constants (2.4 GHz logical channels) */
+#define	CC2520_MINCHANNEL		11
+#define	CC2520_MAXCHANNEL		26
+#define	CC2520_CHANNEL_SPACING		5
+
+/* command strobes */
+#define	CC2520_CMD_SNOP			0x00
+#define	CC2520_CMD_IBUFLD		0x02
+#define	CC2520_CMD_SIBUFEX		0x03
+#define	CC2520_CMD_SSAMPLECCA		0x04
+#define	CC2520_CMD_SRES			0x0f
+#define	CC2520_CMD_MEMORY_MASK		0x0f
+#define	CC2520_CMD_MEMORY_READ		0x10
+#define	CC2520_CMD_MEMORY_WRITE		0x20
+#define	CC2520_CMD_RXBUF		0x30
+#define	CC2520_CMD_RXBUFCP		0x38
+#define	CC2520_CMD_RXBUFMOV		0x32
+#define	CC2520_CMD_TXBUF		0x3A
+#define	CC2520_CMD_TXBUFCP		0x3E
+#define	CC2520_CMD_RANDOM		0x3C
+#define	CC2520_CMD_SXOSCON		0x40
+#define	CC2520_CMD_STXCAL		0x41
+#define	CC2520_CMD_SRXON		0x42
+#define	CC2520_CMD_STXON		0x43
+#define	CC2520_CMD_STXONCCA		0x44
+#define	CC2520_CMD_SRFOFF		0x45
+#define	CC2520_CMD_SXOSCOFF		0x46
+#define	CC2520_CMD_SFLUSHRX		0x47
+#define	CC2520_CMD_SFLUSHTX		0x48
+#define	CC2520_CMD_SACK			0x49
+#define	CC2520_CMD_SACKPEND		0x4A
+#define	CC2520_CMD_SNACK		0x4B
+#define	CC2520_CMD_SRXMASKBITSET	0x4C
+#define	CC2520_CMD_SRXMASKBITCLR	0x4D
+#define	CC2520_CMD_RXMASKAND		0x4E
+#define	CC2520_CMD_RXMASKOR		0x4F
+#define	CC2520_CMD_MEMCP		0x50
+#define	CC2520_CMD_MEMCPR		0x52
+#define	CC2520_CMD_MEMXCP		0x54
+#define	CC2520_CMD_MEMXWR		0x56
+#define	CC2520_CMD_BCLR			0x58
+#define	CC2520_CMD_BSET			0x59
+#define	CC2520_CMD_CTR_UCTR		0x60
+#define	CC2520_CMD_CBCMAC		0x64
+#define	CC2520_CMD_UCBCMAC		0x66
+#define	CC2520_CMD_CCM			0x68
+#define	CC2520_CMD_UCCM			0x6A
+#define	CC2520_CMD_ECB			0x70
+#define	CC2520_CMD_ECBO			0x72
+#define	CC2520_CMD_ECBX			0x74
+#define	CC2520_CMD_INC			0x78
+#define	CC2520_CMD_ABORT		0x7F
+#define	CC2520_CMD_REGISTER_READ	0x80
+#define	CC2520_CMD_REGISTER_WRITE	0xC0
+
+/* status registers */
+#define	CC2520_CHIPID			0x40
+#define	CC2520_VERSION			0x42
+#define	CC2520_EXTCLOCK			0x44
+#define	CC2520_MDMCTRL0			0x46
+#define	CC2520_MDMCTRL1			0x47
+#define	CC2520_FREQEST			0x48
+#define	CC2520_RXCTRL			0x4A
+#define	CC2520_FSCTRL			0x4C
+#define	CC2520_FSCAL0			0x4E
+#define	CC2520_FSCAL1			0x4F
+#define	CC2520_FSCAL2			0x50
+#define	CC2520_FSCAL3			0x51
+#define	CC2520_AGCCTRL0			0x52
+#define	CC2520_AGCCTRL1			0x53
+#define	CC2520_AGCCTRL2			0x54
+#define	CC2520_AGCCTRL3			0x55
+#define	CC2520_ADCTEST0			0x56
+#define	CC2520_ADCTEST1			0x57
+#define	CC2520_ADCTEST2			0x58
+#define	CC2520_MDMTEST0			0x5A
+#define	CC2520_MDMTEST1			0x5B
+#define	CC2520_DACTEST0			0x5C
+#define	CC2520_DACTEST1			0x5D
+#define	CC2520_ATEST			0x5E
+#define	CC2520_DACTEST2			0x5F
+#define	CC2520_PTEST0			0x60
+#define	CC2520_PTEST1			0x61
+#define	CC2520_RESERVED			0x62
+#define	CC2520_DPUBIST			0x7A
+#define	CC2520_ACTBIST			0x7C
+#define	CC2520_RAMBIST			0x7E
+
+/* frame registers */
+#define	CC2520_FRMFILT0			0x00
+#define	CC2520_FRMFILT1			0x01
+#define	CC2520_SRCMATCH			0x02
+#define	CC2520_SRCSHORTEN0		0x04
+#define	CC2520_SRCSHORTEN1		0x05
+#define	CC2520_SRCSHORTEN2		0x06
+#define	CC2520_SRCEXTEN0		0x08
+#define	CC2520_SRCEXTEN1		0x09
+#define	CC2520_SRCEXTEN2		0x0A
+#define	CC2520_FRMCTRL0			0x0C
+#define	CC2520_FRMCTRL1			0x0D
+#define	CC2520_RXENABLE0		0x0E
+#define	CC2520_RXENABLE1		0x0F
+#define	CC2520_EXCFLAG0			0x10
+#define	CC2520_EXCFLAG1			0x11
+#define	CC2520_EXCFLAG2			0x12
+#define	CC2520_EXCMASKA0		0x14
+#define	CC2520_EXCMASKA1		0x15
+#define	CC2520_EXCMASKA2		0x16
+#define	CC2520_EXCMASKB0		0x18
+#define	CC2520_EXCMASKB1		0x19
+#define	CC2520_EXCMASKB2		0x1A
+#define	CC2520_EXCBINDX0		0x1C
+#define	CC2520_EXCBINDX1		0x1D
+#define	CC2520_EXCBINDY0		0x1E
+#define	CC2520_EXCBINDY1		0x1F
+#define	CC2520_GPIOCTRL0		0x20
+#define	CC2520_GPIOCTRL1		0x21
+#define	CC2520_GPIOCTRL2		0x22
+#define	CC2520_GPIOCTRL3		0x23
+#define	CC2520_GPIOCTRL4		0x24
+#define	CC2520_GPIOCTRL5		0x25
+#define	CC2520_GPIOPOLARITY		0x26
+#define	CC2520_GPIOCTRL			0x28
+#define	CC2520_DPUCON			0x2A
+#define	CC2520_DPUSTAT			0x2C
+#define	CC2520_FREQCTRL			0x2E
+#define	CC2520_FREQTUNE			0x2F
+#define	CC2520_TXPOWER			0x30
+#define	CC2520_TXCTRL			0x31
+#define	CC2520_FSMSTAT0			0x32
+#define	CC2520_FSMSTAT1			0x33
+#define	CC2520_FIFOPCTRL		0x34
+#define	CC2520_FSMCTRL			0x35
+#define	CC2520_CCACTRL0			0x36
+#define	CC2520_CCACTRL1			0x37
+#define	CC2520_RSSI			0x38
+#define	CC2520_RSSISTAT			0x39
+#define	CC2520_RXFIRST			0x3C
+#define	CC2520_RXFIFOCNT		0x3E
+#define	CC2520_TXFIFOCNT		0x3F
+
+/* CC2520_FRMFILT0 */
+#define FRMFILT0_FRAME_FILTER_EN	BIT(0)
+#define FRMFILT0_PAN_COORDINATOR	BIT(1)
+
+/* CC2520_FRMCTRL0 */
+#define FRMCTRL0_AUTOACK		BIT(5)
+#define FRMCTRL0_AUTOCRC		BIT(6)
+
+/* CC2520_FRMCTRL1 */
+#define FRMCTRL1_SET_RXENMASK_ON_TX	BIT(0)
+#define FRMCTRL1_IGNORE_TX_UNDERF	BIT(1)
+
+/* Driver private information */
+struct cc2520_private {
+	struct spi_device *spi;		/* SPI device structure */
+	struct ieee802154_hw *hw;	/* IEEE-802.15.4 device */
+	u8 *buf;			/* SPI TX/Rx data buffer */
+	struct mutex buffer_mutex;	/* SPI buffer mutex */
+	bool is_tx;			/* Flag for sync b/w Tx and Rx */
+	bool amplified;			/* Flag for CC2591 */
+	int fifo_pin;			/* FIFO GPIO pin number */
+	struct work_struct fifop_irqwork;/* Workqueue for FIFOP */
+	spinlock_t lock;		/* Lock for is_tx*/
+	struct completion tx_complete;	/* Work completion for Tx */
+	bool promiscuous;               /* Flag for promiscuous mode */
+};
+
+/* Generic Functions */
+static int
+cc2520_cmd_strobe(struct cc2520_private *priv, u8 cmd)
+{
+	int ret;
+	struct spi_message msg;
+	struct spi_transfer xfer = {
+		.len = 0,
+		.tx_buf = priv->buf,
+		.rx_buf = priv->buf,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	mutex_lock(&priv->buffer_mutex);
+	priv->buf[xfer.len++] = cmd;
+	dev_vdbg(&priv->spi->dev,
+		 "command strobe buf[0] = %02x\n",
+		 priv->buf[0]);
+
+	ret = spi_sync(priv->spi, &msg);
+	dev_vdbg(&priv->spi->dev,
+		 "buf[0] = %02x\n", priv->buf[0]);
+	mutex_unlock(&priv->buffer_mutex);
+
+	return ret;
+}
+
+static int
+cc2520_get_status(struct cc2520_private *priv, u8 *status)
+{
+	int ret;
+	struct spi_message msg;
+	struct spi_transfer xfer = {
+		.len = 0,
+		.tx_buf = priv->buf,
+		.rx_buf = priv->buf,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	mutex_lock(&priv->buffer_mutex);
+	priv->buf[xfer.len++] = CC2520_CMD_SNOP;
+	dev_vdbg(&priv->spi->dev,
+		 "get status command buf[0] = %02x\n", priv->buf[0]);
+
+	ret = spi_sync(priv->spi, &msg);
+	if (!ret)
+		*status = priv->buf[0];
+	dev_vdbg(&priv->spi->dev,
+		 "buf[0] = %02x\n", priv->buf[0]);
+	mutex_unlock(&priv->buffer_mutex);
+
+	return ret;
+}
+
+static int
+cc2520_write_register(struct cc2520_private *priv, u8 reg, u8 value)
+{
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer = {
+		.len = 0,
+		.tx_buf = priv->buf,
+		.rx_buf = priv->buf,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	mutex_lock(&priv->buffer_mutex);
+
+	if (reg <= CC2520_FREG_MASK) {
+		priv->buf[xfer.len++] = CC2520_CMD_REGISTER_WRITE | reg;
+		priv->buf[xfer.len++] = value;
+	} else {
+		priv->buf[xfer.len++] = CC2520_CMD_MEMORY_WRITE;
+		priv->buf[xfer.len++] = reg;
+		priv->buf[xfer.len++] = value;
+	}
+	status = spi_sync(priv->spi, &msg);
+	if (msg.status)
+		status = msg.status;
+
+	mutex_unlock(&priv->buffer_mutex);
+
+	return status;
+}
+
+static int
+cc2520_write_ram(struct cc2520_private *priv, u16 reg, u8 len, u8 *data)
+{
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer_head = {
+		.len        = 0,
+		.tx_buf        = priv->buf,
+		.rx_buf        = priv->buf,
+	};
+
+	struct spi_transfer xfer_buf = {
+		.len = len,
+		.tx_buf = data,
+	};
+
+	mutex_lock(&priv->buffer_mutex);
+	priv->buf[xfer_head.len++] = (CC2520_CMD_MEMORY_WRITE |
+						((reg >> 8) & 0xff));
+	priv->buf[xfer_head.len++] = reg & 0xff;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer_head, &msg);
+	spi_message_add_tail(&xfer_buf, &msg);
+
+	status = spi_sync(priv->spi, &msg);
+	dev_dbg(&priv->spi->dev, "spi status = %d\n", status);
+	if (msg.status)
+		status = msg.status;
+
+	mutex_unlock(&priv->buffer_mutex);
+	return status;
+}
+
+static int
+cc2520_read_register(struct cc2520_private *priv, u8 reg, u8 *data)
+{
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer1 = {
+		.len = 0,
+		.tx_buf = priv->buf,
+		.rx_buf = priv->buf,
+	};
+
+	struct spi_transfer xfer2 = {
+		.len = 1,
+		.rx_buf = data,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer1, &msg);
+	spi_message_add_tail(&xfer2, &msg);
+
+	mutex_lock(&priv->buffer_mutex);
+	priv->buf[xfer1.len++] = CC2520_CMD_MEMORY_READ;
+	priv->buf[xfer1.len++] = reg;
+
+	status = spi_sync(priv->spi, &msg);
+	dev_dbg(&priv->spi->dev,
+		"spi status = %d\n", status);
+	if (msg.status)
+		status = msg.status;
+
+	mutex_unlock(&priv->buffer_mutex);
+
+	return status;
+}
+
+static int
+cc2520_write_txfifo(struct cc2520_private *priv, u8 pkt_len, u8 *data, u8 len)
+{
+	int status;
+
+	/* length byte must include FCS even
+	 * if it is calculated in the hardware
+	 */
+	int len_byte = pkt_len;
+
+	struct spi_message msg;
+
+	struct spi_transfer xfer_head = {
+		.len = 0,
+		.tx_buf = priv->buf,
+		.rx_buf = priv->buf,
+	};
+	struct spi_transfer xfer_len = {
+		.len = 1,
+		.tx_buf = &len_byte,
+	};
+	struct spi_transfer xfer_buf = {
+		.len = len,
+		.tx_buf = data,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer_head, &msg);
+	spi_message_add_tail(&xfer_len, &msg);
+	spi_message_add_tail(&xfer_buf, &msg);
+
+	mutex_lock(&priv->buffer_mutex);
+	priv->buf[xfer_head.len++] = CC2520_CMD_TXBUF;
+	dev_vdbg(&priv->spi->dev,
+		 "TX_FIFO cmd buf[0] = %02x\n", priv->buf[0]);
+
+	status = spi_sync(priv->spi, &msg);
+	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
+	if (msg.status)
+		status = msg.status;
+	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
+	dev_vdbg(&priv->spi->dev, "buf[0] = %02x\n", priv->buf[0]);
+	mutex_unlock(&priv->buffer_mutex);
+
+	return status;
+}
+
+static int
+cc2520_read_rxfifo(struct cc2520_private *priv, u8 *data, u8 len)
+{
+	int status;
+	struct spi_message msg;
+
+	struct spi_transfer xfer_head = {
+		.len = 0,
+		.tx_buf = priv->buf,
+		.rx_buf = priv->buf,
+	};
+	struct spi_transfer xfer_buf = {
+		.len = len,
+		.rx_buf = data,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer_head, &msg);
+	spi_message_add_tail(&xfer_buf, &msg);
+
+	mutex_lock(&priv->buffer_mutex);
+	priv->buf[xfer_head.len++] = CC2520_CMD_RXBUF;
+
+	dev_vdbg(&priv->spi->dev, "read rxfifo buf[0] = %02x\n", priv->buf[0]);
+	dev_vdbg(&priv->spi->dev, "buf[1] = %02x\n", priv->buf[1]);
+
+	status = spi_sync(priv->spi, &msg);
+	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
+	if (msg.status)
+		status = msg.status;
+	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
+	dev_vdbg(&priv->spi->dev,
+		 "return status buf[0] = %02x\n", priv->buf[0]);
+	dev_vdbg(&priv->spi->dev, "length buf[1] = %02x\n", priv->buf[1]);
+
+	mutex_unlock(&priv->buffer_mutex);
+
+	return status;
+}
+
+static int cc2520_start(struct ieee802154_hw *hw)
+{
+	return cc2520_cmd_strobe(hw->priv, CC2520_CMD_SRXON);
+}
+
+static void cc2520_stop(struct ieee802154_hw *hw)
+{
+	cc2520_cmd_strobe(hw->priv, CC2520_CMD_SRFOFF);
+}
+
+static int
+cc2520_tx(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct cc2520_private *priv = hw->priv;
+	unsigned long flags;
+	int rc;
+	u8 status = 0;
+	u8 pkt_len;
+
+	/* In promiscuous mode we disable AUTOCRC so we can get the raw CRC
+	 * values on RX. This means we need to manually add the CRC on TX.
+	 */
+	if (priv->promiscuous) {
+		u16 crc = crc_ccitt(0, skb->data, skb->len);
+
+		put_unaligned_le16(crc, skb_put(skb, 2));
+		pkt_len = skb->len;
+	} else {
+		pkt_len = skb->len + 2;
+	}
+
+	rc = cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHTX);
+	if (rc)
+		goto err_tx;
+
+	rc = cc2520_write_txfifo(priv, pkt_len, skb->data, skb->len);
+	if (rc)
+		goto err_tx;
+
+	rc = cc2520_get_status(priv, &status);
+	if (rc)
+		goto err_tx;
+
+	if (status & CC2520_STATUS_TX_UNDERFLOW) {
+		rc = -EINVAL;
+		dev_err(&priv->spi->dev, "cc2520 tx underflow exception\n");
+		goto err_tx;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	WARN_ON(priv->is_tx);
+	priv->is_tx = 1;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	rc = cc2520_cmd_strobe(priv, CC2520_CMD_STXONCCA);
+	if (rc)
+		goto err;
+
+	rc = wait_for_completion_interruptible(&priv->tx_complete);
+	if (rc < 0)
+		goto err;
+
+	cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHTX);
+	cc2520_cmd_strobe(priv, CC2520_CMD_SRXON);
+
+	return rc;
+err:
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->is_tx = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
+err_tx:
+	return rc;
+}
+
+static int cc2520_rx(struct cc2520_private *priv)
+{
+	u8 len = 0, lqi = 0, bytes = 1;
+	struct sk_buff *skb;
+
+	/* Read single length byte from the radio. */
+	cc2520_read_rxfifo(priv, &len, bytes);
+
+	if (!ieee802154_is_valid_psdu_len(len)) {
+		/* Corrupted frame received, clear frame buffer by
+		 * reading entire buffer.
+		 */
+		dev_dbg(&priv->spi->dev, "corrupted frame received\n");
+		len = IEEE802154_MTU;
+	}
+
+	skb = dev_alloc_skb(len);
+	if (!skb)
+		return -ENOMEM;
+
+	if (cc2520_read_rxfifo(priv, skb_put(skb, len), len)) {
+		dev_dbg(&priv->spi->dev, "frame reception failed\n");
+		kfree_skb(skb);
+		return -EINVAL;
+	}
+
+	/* In promiscuous mode, we configure the radio to include the
+	 * CRC (AUTOCRC==0) and we pass on the packet unconditionally. If not
+	 * in promiscuous mode, we check the CRC here, but leave the
+	 * RSSI/LQI/CRC_OK bytes as they will get removed in the mac layer.
+	 */
+	if (!priv->promiscuous) {
+		bool crc_ok;
+
+		/* Check if the CRC is valid. With AUTOCRC set, the most
+		 * significant bit of the last byte returned from the CC2520
+		 * is CRC_OK flag. See section 20.3.4 of the datasheet.
+		 */
+		crc_ok = skb->data[len - 1] & BIT(7);
+
+		/* If we failed CRC drop the packet in the driver layer. */
+		if (!crc_ok) {
+			dev_dbg(&priv->spi->dev, "CRC check failed\n");
+			kfree_skb(skb);
+			return -EINVAL;
+		}
+
+		/* To calculate LQI, the lower 7 bits of the last byte (the
+		 * correlation value provided by the radio) must be scaled to
+		 * the range 0-255. According to section 20.6, the correlation
+		 * value ranges from 50-110. Ideally this would be calibrated
+		 * per hardware design, but we use roughly the datasheet values
+		 * to get close enough while avoiding floating point.
+		 */
+		lqi = skb->data[len - 1] & 0x7f;
+		if (lqi < 50)
+			lqi = 50;
+		else if (lqi > 113)
+			lqi = 113;
+		lqi = (lqi - 50) * 4;
+	}
+
+	ieee802154_rx_irqsafe(priv->hw, skb, lqi);
+
+	dev_vdbg(&priv->spi->dev, "RXFIFO: %x %x\n", len, lqi);
+
+	return 0;
+}
+
+static int
+cc2520_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	struct cc2520_private *priv = hw->priv;
+	u8 status = 0xff;
+	u8 rssi;
+	int ret;
+
+	ret = cc2520_read_register(priv, CC2520_RSSISTAT, &status);
+	if (ret)
+		return ret;
+
+	if (status != RSSI_VALID)
+		return -EINVAL;
+
+	ret = cc2520_read_register(priv, CC2520_RSSI, &rssi);
+	if (ret)
+		return ret;
+
+	/* level = RSSI(rssi) - OFFSET [dBm] : offset is 76dBm */
+	*level = rssi - RSSI_OFFSET;
+
+	return 0;
+}
+
+static int
+cc2520_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct cc2520_private *priv = hw->priv;
+	int ret;
+
+	dev_dbg(&priv->spi->dev, "trying to set channel\n");
+
+	WARN_ON(page != 0);
+	WARN_ON(channel < CC2520_MINCHANNEL);
+	WARN_ON(channel > CC2520_MAXCHANNEL);
+
+	ret = cc2520_write_register(priv, CC2520_FREQCTRL,
+				    11 + 5 * (channel - 11));
+
+	return ret;
+}
+
+static int
+cc2520_filter(struct ieee802154_hw *hw,
+	      struct ieee802154_hw_addr_filt *filt, unsigned long changed)
+{
+	struct cc2520_private *priv = hw->priv;
+	int ret = 0;
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		u16 panid = le16_to_cpu(filt->pan_id);
+
+		dev_vdbg(&priv->spi->dev, "%s called for pan id\n", __func__);
+		ret = cc2520_write_ram(priv, CC2520RAM_PANID,
+				       sizeof(panid), (u8 *)&panid);
+	}
+
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		dev_vdbg(&priv->spi->dev,
+			 "%s called for IEEE addr\n", __func__);
+		ret = cc2520_write_ram(priv, CC2520RAM_IEEEADDR,
+				       sizeof(filt->ieee_addr),
+				       (u8 *)&filt->ieee_addr);
+	}
+
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		u16 addr = le16_to_cpu(filt->short_addr);
+
+		dev_vdbg(&priv->spi->dev, "%s called for saddr\n", __func__);
+		ret = cc2520_write_ram(priv, CC2520RAM_SHORTADDR,
+				       sizeof(addr), (u8 *)&addr);
+	}
+
+	if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+		u8 frmfilt0;
+
+		dev_vdbg(&priv->spi->dev,
+			 "%s called for panc change\n", __func__);
+
+		cc2520_read_register(priv, CC2520_FRMFILT0, &frmfilt0);
+
+		if (filt->pan_coord)
+			frmfilt0 |= FRMFILT0_PAN_COORDINATOR;
+		else
+			frmfilt0 &= ~FRMFILT0_PAN_COORDINATOR;
+
+		ret = cc2520_write_register(priv, CC2520_FRMFILT0, frmfilt0);
+	}
+
+	return ret;
+}
+
+static inline int cc2520_set_tx_power(struct cc2520_private *priv, s32 mbm)
+{
+	u8 power;
+
+	switch (mbm) {
+	case 500:
+		power = 0xF7;
+		break;
+	case 300:
+		power = 0xF2;
+		break;
+	case 200:
+		power = 0xAB;
+		break;
+	case 100:
+		power = 0x13;
+		break;
+	case 0:
+		power = 0x32;
+		break;
+	case -200:
+		power = 0x81;
+		break;
+	case -400:
+		power = 0x88;
+		break;
+	case -700:
+		power = 0x2C;
+		break;
+	case -1800:
+		power = 0x03;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return cc2520_write_register(priv, CC2520_TXPOWER, power);
+}
+
+static inline int cc2520_cc2591_set_tx_power(struct cc2520_private *priv,
+					     s32 mbm)
+{
+	u8 power;
+
+	switch (mbm) {
+	case 1700:
+		power = 0xF9;
+		break;
+	case 1600:
+		power = 0xF0;
+		break;
+	case 1400:
+		power = 0xA0;
+		break;
+	case 1100:
+		power = 0x2C;
+		break;
+	case -100:
+		power = 0x03;
+		break;
+	case -800:
+		power = 0x01;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return cc2520_write_register(priv, CC2520_TXPOWER, power);
+}
+
+#define CC2520_MAX_TX_POWERS 0x8
+static const s32 cc2520_powers[CC2520_MAX_TX_POWERS + 1] = {
+	500, 300, 200, 100, 0, -200, -400, -700, -1800,
+};
+
+#define CC2520_CC2591_MAX_TX_POWERS 0x5
+static const s32 cc2520_cc2591_powers[CC2520_CC2591_MAX_TX_POWERS + 1] = {
+	1700, 1600, 1400, 1100, -100, -800,
+};
+
+static int
+cc2520_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct cc2520_private *priv = hw->priv;
+
+	if (!priv->amplified)
+		return cc2520_set_tx_power(priv, mbm);
+
+	return cc2520_cc2591_set_tx_power(priv, mbm);
+}
+
+static int
+cc2520_set_promiscuous_mode(struct ieee802154_hw *hw, bool on)
+{
+	struct cc2520_private *priv = hw->priv;
+	u8 frmfilt0;
+
+	dev_dbg(&priv->spi->dev, "%s : mode %d\n", __func__, on);
+
+	priv->promiscuous = on;
+
+	cc2520_read_register(priv, CC2520_FRMFILT0, &frmfilt0);
+
+	if (on) {
+		/* Disable automatic ACK, automatic CRC, and frame filtering. */
+		cc2520_write_register(priv, CC2520_FRMCTRL0, 0);
+		frmfilt0 &= ~FRMFILT0_FRAME_FILTER_EN;
+	} else {
+		cc2520_write_register(priv, CC2520_FRMCTRL0, FRMCTRL0_AUTOACK |
+							     FRMCTRL0_AUTOCRC);
+		frmfilt0 |= FRMFILT0_FRAME_FILTER_EN;
+	}
+	return cc2520_write_register(priv, CC2520_FRMFILT0, frmfilt0);
+}
+
+static const struct ieee802154_ops cc2520_ops = {
+	.owner = THIS_MODULE,
+	.start = cc2520_start,
+	.stop = cc2520_stop,
+	.xmit_sync = cc2520_tx,
+	.ed = cc2520_ed,
+	.set_channel = cc2520_set_channel,
+	.set_hw_addr_filt = cc2520_filter,
+	.set_txpower = cc2520_set_txpower,
+	.set_promiscuous_mode = cc2520_set_promiscuous_mode,
+};
+
+static int cc2520_register(struct cc2520_private *priv)
+{
+	int ret = -ENOMEM;
+
+	priv->hw = ieee802154_alloc_hw(sizeof(*priv), &cc2520_ops);
+	if (!priv->hw)
+		goto err_ret;
+
+	priv->hw->priv = priv;
+	priv->hw->parent = &priv->spi->dev;
+	priv->hw->extra_tx_headroom = 0;
+	ieee802154_random_extended_addr(&priv->hw->phy->perm_extended_addr);
+
+	/* We do support only 2.4 Ghz */
+	priv->hw->phy->supported.channels[0] = 0x7FFF800;
+	priv->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
+			  IEEE802154_HW_PROMISCUOUS;
+
+	priv->hw->phy->flags = WPAN_PHY_FLAG_TXPOWER;
+
+	if (!priv->amplified) {
+		priv->hw->phy->supported.tx_powers = cc2520_powers;
+		priv->hw->phy->supported.tx_powers_size = ARRAY_SIZE(cc2520_powers);
+		priv->hw->phy->transmit_power = priv->hw->phy->supported.tx_powers[4];
+	} else {
+		priv->hw->phy->supported.tx_powers = cc2520_cc2591_powers;
+		priv->hw->phy->supported.tx_powers_size = ARRAY_SIZE(cc2520_cc2591_powers);
+		priv->hw->phy->transmit_power = priv->hw->phy->supported.tx_powers[0];
+	}
+
+	priv->hw->phy->current_channel = 11;
+
+	dev_vdbg(&priv->spi->dev, "registered cc2520\n");
+	ret = ieee802154_register_hw(priv->hw);
+	if (ret)
+		goto err_free_device;
+
+	return 0;
+
+err_free_device:
+	ieee802154_free_hw(priv->hw);
+err_ret:
+	return ret;
+}
+
+static void cc2520_fifop_irqwork(struct work_struct *work)
+{
+	struct cc2520_private *priv
+		= container_of(work, struct cc2520_private, fifop_irqwork);
+
+	dev_dbg(&priv->spi->dev, "fifop interrupt received\n");
+
+	if (gpio_get_value(priv->fifo_pin))
+		cc2520_rx(priv);
+	else
+		dev_dbg(&priv->spi->dev, "rxfifo overflow\n");
+
+	cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHRX);
+	cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHRX);
+}
+
+static irqreturn_t cc2520_fifop_isr(int irq, void *data)
+{
+	struct cc2520_private *priv = data;
+
+	schedule_work(&priv->fifop_irqwork);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t cc2520_sfd_isr(int irq, void *data)
+{
+	struct cc2520_private *priv = data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->is_tx) {
+		priv->is_tx = 0;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		dev_dbg(&priv->spi->dev, "SFD for TX\n");
+		complete(&priv->tx_complete);
+	} else {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		dev_dbg(&priv->spi->dev, "SFD for RX\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int cc2520_get_platform_data(struct spi_device *spi,
+				    struct cc2520_platform_data *pdata)
+{
+	struct device_node *np = spi->dev.of_node;
+	struct cc2520_private *priv = spi_get_drvdata(spi);
+
+	if (!np) {
+		struct cc2520_platform_data *spi_pdata = spi->dev.platform_data;
+
+		if (!spi_pdata)
+			return -ENOENT;
+		*pdata = *spi_pdata;
+		priv->fifo_pin = pdata->fifo;
+		return 0;
+	}
+
+	pdata->fifo = of_get_named_gpio(np, "fifo-gpio", 0);
+	priv->fifo_pin = pdata->fifo;
+
+	pdata->fifop = of_get_named_gpio(np, "fifop-gpio", 0);
+
+	pdata->sfd = of_get_named_gpio(np, "sfd-gpio", 0);
+	pdata->cca = of_get_named_gpio(np, "cca-gpio", 0);
+	pdata->vreg = of_get_named_gpio(np, "vreg-gpio", 0);
+	pdata->reset = of_get_named_gpio(np, "reset-gpio", 0);
+
+	/* CC2591 front end for CC2520 */
+	if (of_property_read_bool(np, "amplified"))
+		priv->amplified = true;
+
+	return 0;
+}
+
+static int cc2520_hw_init(struct cc2520_private *priv)
+{
+	u8 status = 0, state = 0xff;
+	int ret;
+	int timeout = 100;
+	struct cc2520_platform_data pdata;
+
+	ret = cc2520_get_platform_data(priv->spi, &pdata);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_read_register(priv, CC2520_FSMSTAT1, &state);
+	if (ret)
+		goto err_ret;
+
+	if (state != STATE_IDLE)
+		return -EINVAL;
+
+	do {
+		ret = cc2520_get_status(priv, &status);
+		if (ret)
+			goto err_ret;
+
+		if (timeout-- <= 0) {
+			dev_err(&priv->spi->dev, "oscillator start failed!\n");
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+	} while (!(status & CC2520_STATUS_XOSC32M_STABLE));
+
+	dev_vdbg(&priv->spi->dev, "oscillator brought up\n");
+
+	/* If the CC2520 is connected to a CC2591 amplifier, we must both
+	 * configure GPIOs on the CC2520 to correctly configure the CC2591
+	 * and change a couple settings of the CC2520 to work with the
+	 * amplifier. See section 8 page 17 of TI application note AN065.
+	 * http://www.ti.com/lit/an/swra229a/swra229a.pdf
+	 */
+	if (priv->amplified) {
+		ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x16);
+		if (ret)
+			goto err_ret;
+
+		ret = cc2520_write_register(priv, CC2520_GPIOCTRL0, 0x46);
+		if (ret)
+			goto err_ret;
+
+		ret = cc2520_write_register(priv, CC2520_GPIOCTRL5, 0x47);
+		if (ret)
+			goto err_ret;
+
+		ret = cc2520_write_register(priv, CC2520_GPIOPOLARITY, 0x1e);
+		if (ret)
+			goto err_ret;
+
+		ret = cc2520_write_register(priv, CC2520_TXCTRL, 0xc1);
+		if (ret)
+			goto err_ret;
+	} else {
+		ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x11);
+		if (ret)
+			goto err_ret;
+	}
+
+	/* Registers default value: section 28.1 in Datasheet */
+
+	/* Set the CCA threshold to -50 dBm. This seems to have been copied
+	 * from the TinyOS CC2520 driver and is much higher than the -84 dBm
+	 * threshold suggested in the datasheet.
+	 */
+	ret = cc2520_write_register(priv, CC2520_CCACTRL0, 0x1A);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_MDMCTRL0, 0x85);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_MDMCTRL1, 0x14);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_RXCTRL, 0x3f);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_FSCTRL, 0x5a);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_FSCAL1, 0x2b);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_ADCTEST0, 0x10);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_ADCTEST1, 0x0e);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_ADCTEST2, 0x03);
+	if (ret)
+		goto err_ret;
+
+	/* Configure registers correctly for this driver. */
+	ret = cc2520_write_register(priv, CC2520_FRMCTRL1,
+				    FRMCTRL1_SET_RXENMASK_ON_TX |
+				    FRMCTRL1_IGNORE_TX_UNDERF);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_FIFOPCTRL, 127);
+	if (ret)
+		goto err_ret;
+
+	return 0;
+
+err_ret:
+	return ret;
+}
+
+static int cc2520_probe(struct spi_device *spi)
+{
+	struct cc2520_private *priv;
+	struct cc2520_platform_data pdata;
+	int ret;
+
+	priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, priv);
+
+	ret = cc2520_get_platform_data(spi, &pdata);
+	if (ret < 0) {
+		dev_err(&spi->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	priv->spi = spi;
+
+	priv->buf = devm_kzalloc(&spi->dev,
+				 SPI_COMMAND_BUFFER, GFP_KERNEL);
+	if (!priv->buf)
+		return -ENOMEM;
+
+	mutex_init(&priv->buffer_mutex);
+	INIT_WORK(&priv->fifop_irqwork, cc2520_fifop_irqwork);
+	spin_lock_init(&priv->lock);
+	init_completion(&priv->tx_complete);
+
+	/* Assumption that CC2591 is not connected */
+	priv->amplified = false;
+
+	/* Request all the gpio's */
+	if (!gpio_is_valid(pdata.fifo)) {
+		dev_err(&spi->dev, "fifo gpio is not valid\n");
+		ret = -EINVAL;
+		goto err_hw_init;
+	}
+
+	ret = devm_gpio_request_one(&spi->dev, pdata.fifo,
+				    GPIOF_IN, "fifo");
+	if (ret)
+		goto err_hw_init;
+
+	if (!gpio_is_valid(pdata.cca)) {
+		dev_err(&spi->dev, "cca gpio is not valid\n");
+		ret = -EINVAL;
+		goto err_hw_init;
+	}
+
+	ret = devm_gpio_request_one(&spi->dev, pdata.cca,
+				    GPIOF_IN, "cca");
+	if (ret)
+		goto err_hw_init;
+
+	if (!gpio_is_valid(pdata.fifop)) {
+		dev_err(&spi->dev, "fifop gpio is not valid\n");
+		ret = -EINVAL;
+		goto err_hw_init;
+	}
+
+	ret = devm_gpio_request_one(&spi->dev, pdata.fifop,
+				    GPIOF_IN, "fifop");
+	if (ret)
+		goto err_hw_init;
+
+	if (!gpio_is_valid(pdata.sfd)) {
+		dev_err(&spi->dev, "sfd gpio is not valid\n");
+		ret = -EINVAL;
+		goto err_hw_init;
+	}
+
+	ret = devm_gpio_request_one(&spi->dev, pdata.sfd,
+				    GPIOF_IN, "sfd");
+	if (ret)
+		goto err_hw_init;
+
+	if (!gpio_is_valid(pdata.reset)) {
+		dev_err(&spi->dev, "reset gpio is not valid\n");
+		ret = -EINVAL;
+		goto err_hw_init;
+	}
+
+	ret = devm_gpio_request_one(&spi->dev, pdata.reset,
+				    GPIOF_OUT_INIT_LOW, "reset");
+	if (ret)
+		goto err_hw_init;
+
+	if (!gpio_is_valid(pdata.vreg)) {
+		dev_err(&spi->dev, "vreg gpio is not valid\n");
+		ret = -EINVAL;
+		goto err_hw_init;
+	}
+
+	ret = devm_gpio_request_one(&spi->dev, pdata.vreg,
+				    GPIOF_OUT_INIT_LOW, "vreg");
+	if (ret)
+		goto err_hw_init;
+
+	gpio_set_value(pdata.vreg, HIGH);
+	usleep_range(100, 150);
+
+	gpio_set_value(pdata.reset, HIGH);
+	usleep_range(200, 250);
+
+	ret = cc2520_hw_init(priv);
+	if (ret)
+		goto err_hw_init;
+
+	/* Set up fifop interrupt */
+	ret = devm_request_irq(&spi->dev,
+			       gpio_to_irq(pdata.fifop),
+			       cc2520_fifop_isr,
+			       IRQF_TRIGGER_RISING,
+			       dev_name(&spi->dev),
+			       priv);
+	if (ret) {
+		dev_err(&spi->dev, "could not get fifop irq\n");
+		goto err_hw_init;
+	}
+
+	/* Set up sfd interrupt */
+	ret = devm_request_irq(&spi->dev,
+			       gpio_to_irq(pdata.sfd),
+			       cc2520_sfd_isr,
+			       IRQF_TRIGGER_FALLING,
+			       dev_name(&spi->dev),
+			       priv);
+	if (ret) {
+		dev_err(&spi->dev, "could not get sfd irq\n");
+		goto err_hw_init;
+	}
+
+	ret = cc2520_register(priv);
+	if (ret)
+		goto err_hw_init;
+
+	return 0;
+
+err_hw_init:
+	mutex_destroy(&priv->buffer_mutex);
+	flush_work(&priv->fifop_irqwork);
+	return ret;
+}
+
+static void cc2520_remove(struct spi_device *spi)
+{
+	struct cc2520_private *priv = spi_get_drvdata(spi);
+
+	mutex_destroy(&priv->buffer_mutex);
+	flush_work(&priv->fifop_irqwork);
+
+	ieee802154_unregister_hw(priv->hw);
+	ieee802154_free_hw(priv->hw);
+}
+
+static const struct spi_device_id cc2520_ids[] = {
+	{"cc2520", },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, cc2520_ids);
+
+static const struct of_device_id cc2520_of_ids[] = {
+	{.compatible = "ti,cc2520", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cc2520_of_ids);
+
+/* SPI driver structure */
+static struct spi_driver cc2520_driver = {
+	.driver = {
+		.name = "cc2520",
+		.of_match_table = of_match_ptr(cc2520_of_ids),
+	},
+	.id_table = cc2520_ids,
+	.probe = cc2520_probe,
+	.remove = cc2520_remove,
+};
+module_spi_driver(cc2520_driver);
+
+MODULE_AUTHOR("Varka Bhadram <varkab@cdac.in>");
+MODULE_DESCRIPTION("CC2520 Transceiver Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ieee802154/fakelb.c b/drivers/net/ieee802154/fakelb.c
new file mode 100644
index 000000000..523d13ee0
--- /dev/null
+++ b/drivers/net/ieee802154/fakelb.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Loopback IEEE 802.15.4 interface
+ *
+ * Copyright 2007-2012 Siemens AG
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ * Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <net/mac802154.h>
+#include <net/cfg802154.h>
+
+static int numlbs = 2;
+
+static LIST_HEAD(fakelb_phys);
+static DEFINE_MUTEX(fakelb_phys_lock);
+
+static LIST_HEAD(fakelb_ifup_phys);
+static DEFINE_RWLOCK(fakelb_ifup_phys_lock);
+
+struct fakelb_phy {
+	struct ieee802154_hw *hw;
+
+	u8 page;
+	u8 channel;
+
+	bool suspended;
+
+	struct list_head list;
+	struct list_head list_ifup;
+};
+
+static int fakelb_hw_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	WARN_ON(!level);
+	*level = 0xbe;
+
+	return 0;
+}
+
+static int fakelb_hw_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct fakelb_phy *phy = hw->priv;
+
+	write_lock_bh(&fakelb_ifup_phys_lock);
+	phy->page = page;
+	phy->channel = channel;
+	write_unlock_bh(&fakelb_ifup_phys_lock);
+	return 0;
+}
+
+static int fakelb_hw_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct fakelb_phy *current_phy = hw->priv, *phy;
+
+	read_lock_bh(&fakelb_ifup_phys_lock);
+	WARN_ON(current_phy->suspended);
+	list_for_each_entry(phy, &fakelb_ifup_phys, list_ifup) {
+		if (current_phy == phy)
+			continue;
+
+		if (current_phy->page == phy->page &&
+		    current_phy->channel == phy->channel) {
+			struct sk_buff *newskb = pskb_copy(skb, GFP_ATOMIC);
+
+			if (newskb)
+				ieee802154_rx_irqsafe(phy->hw, newskb, 0xcc);
+		}
+	}
+	read_unlock_bh(&fakelb_ifup_phys_lock);
+
+	ieee802154_xmit_complete(hw, skb, false);
+	return 0;
+}
+
+static int fakelb_hw_start(struct ieee802154_hw *hw)
+{
+	struct fakelb_phy *phy = hw->priv;
+
+	write_lock_bh(&fakelb_ifup_phys_lock);
+	phy->suspended = false;
+	list_add(&phy->list_ifup, &fakelb_ifup_phys);
+	write_unlock_bh(&fakelb_ifup_phys_lock);
+
+	return 0;
+}
+
+static void fakelb_hw_stop(struct ieee802154_hw *hw)
+{
+	struct fakelb_phy *phy = hw->priv;
+
+	write_lock_bh(&fakelb_ifup_phys_lock);
+	phy->suspended = true;
+	list_del(&phy->list_ifup);
+	write_unlock_bh(&fakelb_ifup_phys_lock);
+}
+
+static int
+fakelb_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
+{
+	return 0;
+}
+
+static const struct ieee802154_ops fakelb_ops = {
+	.owner = THIS_MODULE,
+	.xmit_async = fakelb_hw_xmit,
+	.ed = fakelb_hw_ed,
+	.set_channel = fakelb_hw_channel,
+	.start = fakelb_hw_start,
+	.stop = fakelb_hw_stop,
+	.set_promiscuous_mode = fakelb_set_promiscuous_mode,
+};
+
+/* Number of dummy devices to be set up by this module. */
+module_param(numlbs, int, 0);
+MODULE_PARM_DESC(numlbs, " number of pseudo devices");
+
+static int fakelb_add_one(struct device *dev)
+{
+	struct ieee802154_hw *hw;
+	struct fakelb_phy *phy;
+	int err;
+
+	hw = ieee802154_alloc_hw(sizeof(*phy), &fakelb_ops);
+	if (!hw)
+		return -ENOMEM;
+
+	phy = hw->priv;
+	phy->hw = hw;
+
+	/* 868 MHz BPSK	802.15.4-2003 */
+	hw->phy->supported.channels[0] |= 1;
+	/* 915 MHz BPSK	802.15.4-2003 */
+	hw->phy->supported.channels[0] |= 0x7fe;
+	/* 2.4 GHz O-QPSK 802.15.4-2003 */
+	hw->phy->supported.channels[0] |= 0x7FFF800;
+	/* 868 MHz ASK 802.15.4-2006 */
+	hw->phy->supported.channels[1] |= 1;
+	/* 915 MHz ASK 802.15.4-2006 */
+	hw->phy->supported.channels[1] |= 0x7fe;
+	/* 868 MHz O-QPSK 802.15.4-2006 */
+	hw->phy->supported.channels[2] |= 1;
+	/* 915 MHz O-QPSK 802.15.4-2006 */
+	hw->phy->supported.channels[2] |= 0x7fe;
+	/* 2.4 GHz CSS 802.15.4a-2007 */
+	hw->phy->supported.channels[3] |= 0x3fff;
+	/* UWB Sub-gigahertz 802.15.4a-2007 */
+	hw->phy->supported.channels[4] |= 1;
+	/* UWB Low band 802.15.4a-2007 */
+	hw->phy->supported.channels[4] |= 0x1e;
+	/* UWB High band 802.15.4a-2007 */
+	hw->phy->supported.channels[4] |= 0xffe0;
+	/* 750 MHz O-QPSK 802.15.4c-2009 */
+	hw->phy->supported.channels[5] |= 0xf;
+	/* 750 MHz MPSK 802.15.4c-2009 */
+	hw->phy->supported.channels[5] |= 0xf0;
+	/* 950 MHz BPSK 802.15.4d-2009 */
+	hw->phy->supported.channels[6] |= 0x3ff;
+	/* 950 MHz GFSK 802.15.4d-2009 */
+	hw->phy->supported.channels[6] |= 0x3ffc00;
+
+	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
+	/* fake phy channel 13 as default */
+	hw->phy->current_channel = 13;
+	phy->channel = hw->phy->current_channel;
+
+	hw->flags = IEEE802154_HW_PROMISCUOUS;
+	hw->parent = dev;
+
+	err = ieee802154_register_hw(hw);
+	if (err)
+		goto err_reg;
+
+	mutex_lock(&fakelb_phys_lock);
+	list_add_tail(&phy->list, &fakelb_phys);
+	mutex_unlock(&fakelb_phys_lock);
+
+	return 0;
+
+err_reg:
+	ieee802154_free_hw(phy->hw);
+	return err;
+}
+
+static void fakelb_del(struct fakelb_phy *phy)
+{
+	list_del(&phy->list);
+
+	ieee802154_unregister_hw(phy->hw);
+	ieee802154_free_hw(phy->hw);
+}
+
+static int fakelb_probe(struct platform_device *pdev)
+{
+	struct fakelb_phy *phy, *tmp;
+	int err, i;
+
+	for (i = 0; i < numlbs; i++) {
+		err = fakelb_add_one(&pdev->dev);
+		if (err < 0)
+			goto err_slave;
+	}
+
+	dev_info(&pdev->dev, "added %i fake ieee802154 hardware devices\n", numlbs);
+	return 0;
+
+err_slave:
+	mutex_lock(&fakelb_phys_lock);
+	list_for_each_entry_safe(phy, tmp, &fakelb_phys, list)
+		fakelb_del(phy);
+	mutex_unlock(&fakelb_phys_lock);
+	return err;
+}
+
+static int fakelb_remove(struct platform_device *pdev)
+{
+	struct fakelb_phy *phy, *tmp;
+
+	mutex_lock(&fakelb_phys_lock);
+	list_for_each_entry_safe(phy, tmp, &fakelb_phys, list)
+		fakelb_del(phy);
+	mutex_unlock(&fakelb_phys_lock);
+	return 0;
+}
+
+static struct platform_device *ieee802154fake_dev;
+
+static struct platform_driver ieee802154fake_driver = {
+	.probe = fakelb_probe,
+	.remove = fakelb_remove,
+	.driver = {
+			.name = "ieee802154fakelb",
+	},
+};
+
+static __init int fakelb_init_module(void)
+{
+	ieee802154fake_dev = platform_device_register_simple(
+			     "ieee802154fakelb", -1, NULL, 0);
+
+	pr_warn("fakelb driver is marked as deprecated, please use mac802154_hwsim!\n");
+
+	return platform_driver_register(&ieee802154fake_driver);
+}
+
+static __exit void fake_remove_module(void)
+{
+	platform_driver_unregister(&ieee802154fake_driver);
+	platform_device_unregister(ieee802154fake_dev);
+}
+
+module_init(fakelb_init_module);
+module_exit(fake_remove_module);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ieee802154/mac802154_hwsim.c b/drivers/net/ieee802154/mac802154_hwsim.c
new file mode 100644
index 000000000..9b3da6184
--- /dev/null
+++ b/drivers/net/ieee802154/mac802154_hwsim.c
@@ -0,0 +1,929 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HWSIM IEEE 802.15.4 interface
+ *
+ * (C) 2018 Mojatau, Alexander Aring <aring@mojatau.com>
+ * Copyright 2007-2012 Siemens AG
+ *
+ * Based on fakelb, original Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ * Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/platform_device.h>
+#include <linux/rtnetlink.h>
+#include <linux/netdevice.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <net/mac802154.h>
+#include <net/cfg802154.h>
+#include <net/genetlink.h>
+#include "mac802154_hwsim.h"
+
+MODULE_DESCRIPTION("Software simulator of IEEE 802.15.4 radio(s) for mac802154");
+MODULE_LICENSE("GPL");
+
+static LIST_HEAD(hwsim_phys);
+static DEFINE_MUTEX(hwsim_phys_lock);
+
+static struct platform_device *mac802154hwsim_dev;
+
+/* MAC802154_HWSIM netlink family */
+static struct genl_family hwsim_genl_family;
+
+static int hwsim_radio_idx;
+
+enum hwsim_multicast_groups {
+	HWSIM_MCGRP_CONFIG,
+};
+
+static const struct genl_multicast_group hwsim_mcgrps[] = {
+	[HWSIM_MCGRP_CONFIG] = { .name = "config", },
+};
+
+struct hwsim_pib {
+	u8 page;
+	u8 channel;
+
+	struct rcu_head rcu;
+};
+
+struct hwsim_edge_info {
+	u8 lqi;
+
+	struct rcu_head rcu;
+};
+
+struct hwsim_edge {
+	struct hwsim_phy *endpoint;
+	struct hwsim_edge_info __rcu *info;
+
+	struct list_head list;
+	struct rcu_head rcu;
+};
+
+struct hwsim_phy {
+	struct ieee802154_hw *hw;
+	u32 idx;
+
+	struct hwsim_pib __rcu *pib;
+
+	bool suspended;
+	struct list_head edges;
+
+	struct list_head list;
+};
+
+static int hwsim_add_one(struct genl_info *info, struct device *dev,
+			 bool init);
+static void hwsim_del(struct hwsim_phy *phy);
+
+static int hwsim_hw_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	*level = 0xbe;
+
+	return 0;
+}
+
+static int hwsim_hw_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct hwsim_phy *phy = hw->priv;
+	struct hwsim_pib *pib, *pib_old;
+
+	pib = kzalloc(sizeof(*pib), GFP_KERNEL);
+	if (!pib)
+		return -ENOMEM;
+
+	pib->page = page;
+	pib->channel = channel;
+
+	pib_old = rtnl_dereference(phy->pib);
+	rcu_assign_pointer(phy->pib, pib);
+	kfree_rcu(pib_old, rcu);
+	return 0;
+}
+
+static int hwsim_hw_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct hwsim_phy *current_phy = hw->priv;
+	struct hwsim_pib *current_pib, *endpoint_pib;
+	struct hwsim_edge_info *einfo;
+	struct hwsim_edge *e;
+
+	WARN_ON(current_phy->suspended);
+
+	rcu_read_lock();
+	current_pib = rcu_dereference(current_phy->pib);
+	list_for_each_entry_rcu(e, &current_phy->edges, list) {
+		/* Can be changed later in rx_irqsafe, but this is only a
+		 * performance tweak. Received radio should drop the frame
+		 * in mac802154 stack anyway... so we don't need to be
+		 * 100% of locking here to check on suspended
+		 */
+		if (e->endpoint->suspended)
+			continue;
+
+		endpoint_pib = rcu_dereference(e->endpoint->pib);
+		if (current_pib->page == endpoint_pib->page &&
+		    current_pib->channel == endpoint_pib->channel) {
+			struct sk_buff *newskb = pskb_copy(skb, GFP_ATOMIC);
+
+			einfo = rcu_dereference(e->info);
+			if (newskb)
+				ieee802154_rx_irqsafe(e->endpoint->hw, newskb,
+						      einfo->lqi);
+		}
+	}
+	rcu_read_unlock();
+
+	ieee802154_xmit_complete(hw, skb, false);
+	return 0;
+}
+
+static int hwsim_hw_start(struct ieee802154_hw *hw)
+{
+	struct hwsim_phy *phy = hw->priv;
+
+	phy->suspended = false;
+	return 0;
+}
+
+static void hwsim_hw_stop(struct ieee802154_hw *hw)
+{
+	struct hwsim_phy *phy = hw->priv;
+
+	phy->suspended = true;
+}
+
+static int
+hwsim_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
+{
+	return 0;
+}
+
+static const struct ieee802154_ops hwsim_ops = {
+	.owner = THIS_MODULE,
+	.xmit_async = hwsim_hw_xmit,
+	.ed = hwsim_hw_ed,
+	.set_channel = hwsim_hw_channel,
+	.start = hwsim_hw_start,
+	.stop = hwsim_hw_stop,
+	.set_promiscuous_mode = hwsim_set_promiscuous_mode,
+};
+
+static int hwsim_new_radio_nl(struct sk_buff *msg, struct genl_info *info)
+{
+	return hwsim_add_one(info, &mac802154hwsim_dev->dev, false);
+}
+
+static int hwsim_del_radio_nl(struct sk_buff *msg, struct genl_info *info)
+{
+	struct hwsim_phy *phy, *tmp;
+	s64 idx = -1;
+
+	if (!info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID])
+		return -EINVAL;
+
+	idx = nla_get_u32(info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID]);
+
+	mutex_lock(&hwsim_phys_lock);
+	list_for_each_entry_safe(phy, tmp, &hwsim_phys, list) {
+		if (idx == phy->idx) {
+			hwsim_del(phy);
+			mutex_unlock(&hwsim_phys_lock);
+			return 0;
+		}
+	}
+	mutex_unlock(&hwsim_phys_lock);
+
+	return -ENODEV;
+}
+
+static int append_radio_msg(struct sk_buff *skb, struct hwsim_phy *phy)
+{
+	struct nlattr *nl_edges, *nl_edge;
+	struct hwsim_edge_info *einfo;
+	struct hwsim_edge *e;
+	int ret;
+
+	ret = nla_put_u32(skb, MAC802154_HWSIM_ATTR_RADIO_ID, phy->idx);
+	if (ret < 0)
+		return ret;
+
+	rcu_read_lock();
+	if (list_empty(&phy->edges)) {
+		rcu_read_unlock();
+		return 0;
+	}
+
+	nl_edges = nla_nest_start_noflag(skb,
+					 MAC802154_HWSIM_ATTR_RADIO_EDGES);
+	if (!nl_edges) {
+		rcu_read_unlock();
+		return -ENOBUFS;
+	}
+
+	list_for_each_entry_rcu(e, &phy->edges, list) {
+		nl_edge = nla_nest_start_noflag(skb,
+						MAC802154_HWSIM_ATTR_RADIO_EDGE);
+		if (!nl_edge) {
+			rcu_read_unlock();
+			nla_nest_cancel(skb, nl_edges);
+			return -ENOBUFS;
+		}
+
+		ret = nla_put_u32(skb, MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID,
+				  e->endpoint->idx);
+		if (ret < 0) {
+			rcu_read_unlock();
+			nla_nest_cancel(skb, nl_edge);
+			nla_nest_cancel(skb, nl_edges);
+			return ret;
+		}
+
+		einfo = rcu_dereference(e->info);
+		ret = nla_put_u8(skb, MAC802154_HWSIM_EDGE_ATTR_LQI,
+				 einfo->lqi);
+		if (ret < 0) {
+			rcu_read_unlock();
+			nla_nest_cancel(skb, nl_edge);
+			nla_nest_cancel(skb, nl_edges);
+			return ret;
+		}
+
+		nla_nest_end(skb, nl_edge);
+	}
+	rcu_read_unlock();
+
+	nla_nest_end(skb, nl_edges);
+
+	return 0;
+}
+
+static int hwsim_get_radio(struct sk_buff *skb, struct hwsim_phy *phy,
+			   u32 portid, u32 seq,
+			   struct netlink_callback *cb, int flags)
+{
+	void *hdr;
+	int res;
+
+	hdr = genlmsg_put(skb, portid, seq, &hwsim_genl_family, flags,
+			  MAC802154_HWSIM_CMD_GET_RADIO);
+	if (!hdr)
+		return -EMSGSIZE;
+
+	if (cb)
+		genl_dump_check_consistent(cb, hdr);
+
+	res = append_radio_msg(skb, phy);
+	if (res < 0)
+		goto out_err;
+
+	genlmsg_end(skb, hdr);
+	return 0;
+
+out_err:
+	genlmsg_cancel(skb, hdr);
+	return res;
+}
+
+static int hwsim_get_radio_nl(struct sk_buff *msg, struct genl_info *info)
+{
+	struct hwsim_phy *phy;
+	struct sk_buff *skb;
+	int idx, res = -ENODEV;
+
+	if (!info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID])
+		return -EINVAL;
+	idx = nla_get_u32(info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID]);
+
+	mutex_lock(&hwsim_phys_lock);
+	list_for_each_entry(phy, &hwsim_phys, list) {
+		if (phy->idx != idx)
+			continue;
+
+		skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+		if (!skb) {
+			res = -ENOMEM;
+			goto out_err;
+		}
+
+		res = hwsim_get_radio(skb, phy, info->snd_portid,
+				      info->snd_seq, NULL, 0);
+		if (res < 0) {
+			nlmsg_free(skb);
+			goto out_err;
+		}
+
+		res = genlmsg_reply(skb, info);
+		break;
+	}
+
+out_err:
+	mutex_unlock(&hwsim_phys_lock);
+
+	return res;
+}
+
+static int hwsim_dump_radio_nl(struct sk_buff *skb,
+			       struct netlink_callback *cb)
+{
+	int idx = cb->args[0];
+	struct hwsim_phy *phy;
+	int res;
+
+	mutex_lock(&hwsim_phys_lock);
+
+	if (idx == hwsim_radio_idx)
+		goto done;
+
+	list_for_each_entry(phy, &hwsim_phys, list) {
+		if (phy->idx < idx)
+			continue;
+
+		res = hwsim_get_radio(skb, phy, NETLINK_CB(cb->skb).portid,
+				      cb->nlh->nlmsg_seq, cb, NLM_F_MULTI);
+		if (res < 0)
+			break;
+
+		idx = phy->idx + 1;
+	}
+
+	cb->args[0] = idx;
+
+done:
+	mutex_unlock(&hwsim_phys_lock);
+	return skb->len;
+}
+
+/* caller need to held hwsim_phys_lock */
+static struct hwsim_phy *hwsim_get_radio_by_id(uint32_t idx)
+{
+	struct hwsim_phy *phy;
+
+	list_for_each_entry(phy, &hwsim_phys, list) {
+		if (phy->idx == idx)
+			return phy;
+	}
+
+	return NULL;
+}
+
+static const struct nla_policy hwsim_edge_policy[MAC802154_HWSIM_EDGE_ATTR_MAX + 1] = {
+	[MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID] = { .type = NLA_U32 },
+	[MAC802154_HWSIM_EDGE_ATTR_LQI] = { .type = NLA_U8 },
+};
+
+static struct hwsim_edge *hwsim_alloc_edge(struct hwsim_phy *endpoint, u8 lqi)
+{
+	struct hwsim_edge_info *einfo;
+	struct hwsim_edge *e;
+
+	e = kzalloc(sizeof(*e), GFP_KERNEL);
+	if (!e)
+		return NULL;
+
+	einfo = kzalloc(sizeof(*einfo), GFP_KERNEL);
+	if (!einfo) {
+		kfree(e);
+		return NULL;
+	}
+
+	einfo->lqi = 0xff;
+	rcu_assign_pointer(e->info, einfo);
+	e->endpoint = endpoint;
+
+	return e;
+}
+
+static void hwsim_free_edge(struct hwsim_edge *e)
+{
+	struct hwsim_edge_info *einfo;
+
+	rcu_read_lock();
+	einfo = rcu_dereference(e->info);
+	rcu_read_unlock();
+
+	kfree_rcu(einfo, rcu);
+	kfree_rcu(e, rcu);
+}
+
+static int hwsim_new_edge_nl(struct sk_buff *msg, struct genl_info *info)
+{
+	struct nlattr *edge_attrs[MAC802154_HWSIM_EDGE_ATTR_MAX + 1];
+	struct hwsim_phy *phy_v0, *phy_v1;
+	struct hwsim_edge *e;
+	u32 v0, v1;
+
+	if (!info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID] ||
+	    !info->attrs[MAC802154_HWSIM_ATTR_RADIO_EDGE])
+		return -EINVAL;
+
+	if (nla_parse_nested_deprecated(edge_attrs, MAC802154_HWSIM_EDGE_ATTR_MAX, info->attrs[MAC802154_HWSIM_ATTR_RADIO_EDGE], hwsim_edge_policy, NULL))
+		return -EINVAL;
+
+	if (!edge_attrs[MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID])
+		return -EINVAL;
+
+	v0 = nla_get_u32(info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID]);
+	v1 = nla_get_u32(edge_attrs[MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID]);
+
+	if (v0 == v1)
+		return -EINVAL;
+
+	mutex_lock(&hwsim_phys_lock);
+	phy_v0 = hwsim_get_radio_by_id(v0);
+	if (!phy_v0) {
+		mutex_unlock(&hwsim_phys_lock);
+		return -ENOENT;
+	}
+
+	phy_v1 = hwsim_get_radio_by_id(v1);
+	if (!phy_v1) {
+		mutex_unlock(&hwsim_phys_lock);
+		return -ENOENT;
+	}
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(e, &phy_v0->edges, list) {
+		if (e->endpoint->idx == v1) {
+			mutex_unlock(&hwsim_phys_lock);
+			rcu_read_unlock();
+			return -EEXIST;
+		}
+	}
+	rcu_read_unlock();
+
+	e = hwsim_alloc_edge(phy_v1, 0xff);
+	if (!e) {
+		mutex_unlock(&hwsim_phys_lock);
+		return -ENOMEM;
+	}
+	list_add_rcu(&e->list, &phy_v0->edges);
+	/* wait until changes are done under hwsim_phys_lock lock
+	 * should prevent of calling this function twice while
+	 * edges list has not the changes yet.
+	 */
+	synchronize_rcu();
+	mutex_unlock(&hwsim_phys_lock);
+
+	return 0;
+}
+
+static int hwsim_del_edge_nl(struct sk_buff *msg, struct genl_info *info)
+{
+	struct nlattr *edge_attrs[MAC802154_HWSIM_EDGE_ATTR_MAX + 1];
+	struct hwsim_phy *phy_v0;
+	struct hwsim_edge *e;
+	u32 v0, v1;
+
+	if (!info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID] ||
+	    !info->attrs[MAC802154_HWSIM_ATTR_RADIO_EDGE])
+		return -EINVAL;
+
+	if (nla_parse_nested_deprecated(edge_attrs, MAC802154_HWSIM_EDGE_ATTR_MAX, info->attrs[MAC802154_HWSIM_ATTR_RADIO_EDGE], hwsim_edge_policy, NULL))
+		return -EINVAL;
+
+	if (!edge_attrs[MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID])
+		return -EINVAL;
+
+	v0 = nla_get_u32(info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID]);
+	v1 = nla_get_u32(edge_attrs[MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID]);
+
+	mutex_lock(&hwsim_phys_lock);
+	phy_v0 = hwsim_get_radio_by_id(v0);
+	if (!phy_v0) {
+		mutex_unlock(&hwsim_phys_lock);
+		return -ENOENT;
+	}
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(e, &phy_v0->edges, list) {
+		if (e->endpoint->idx == v1) {
+			rcu_read_unlock();
+			list_del_rcu(&e->list);
+			hwsim_free_edge(e);
+			/* same again - wait until list changes are done */
+			synchronize_rcu();
+			mutex_unlock(&hwsim_phys_lock);
+			return 0;
+		}
+	}
+	rcu_read_unlock();
+
+	mutex_unlock(&hwsim_phys_lock);
+
+	return -ENOENT;
+}
+
+static int hwsim_set_edge_lqi(struct sk_buff *msg, struct genl_info *info)
+{
+	struct nlattr *edge_attrs[MAC802154_HWSIM_EDGE_ATTR_MAX + 1];
+	struct hwsim_edge_info *einfo, *einfo_old;
+	struct hwsim_phy *phy_v0;
+	struct hwsim_edge *e;
+	u32 v0, v1;
+	u8 lqi;
+
+	if (!info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID] ||
+	    !info->attrs[MAC802154_HWSIM_ATTR_RADIO_EDGE])
+		return -EINVAL;
+
+	if (nla_parse_nested_deprecated(edge_attrs, MAC802154_HWSIM_EDGE_ATTR_MAX, info->attrs[MAC802154_HWSIM_ATTR_RADIO_EDGE], hwsim_edge_policy, NULL))
+		return -EINVAL;
+
+	if (!edge_attrs[MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID] ||
+	    !edge_attrs[MAC802154_HWSIM_EDGE_ATTR_LQI])
+		return -EINVAL;
+
+	v0 = nla_get_u32(info->attrs[MAC802154_HWSIM_ATTR_RADIO_ID]);
+	v1 = nla_get_u32(edge_attrs[MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID]);
+	lqi = nla_get_u8(edge_attrs[MAC802154_HWSIM_EDGE_ATTR_LQI]);
+
+	mutex_lock(&hwsim_phys_lock);
+	phy_v0 = hwsim_get_radio_by_id(v0);
+	if (!phy_v0) {
+		mutex_unlock(&hwsim_phys_lock);
+		return -ENOENT;
+	}
+
+	einfo = kzalloc(sizeof(*einfo), GFP_KERNEL);
+	if (!einfo) {
+		mutex_unlock(&hwsim_phys_lock);
+		return -ENOMEM;
+	}
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(e, &phy_v0->edges, list) {
+		if (e->endpoint->idx == v1) {
+			einfo->lqi = lqi;
+			einfo_old = rcu_replace_pointer(e->info, einfo,
+							lockdep_is_held(&hwsim_phys_lock));
+			rcu_read_unlock();
+			kfree_rcu(einfo_old, rcu);
+			mutex_unlock(&hwsim_phys_lock);
+			return 0;
+		}
+	}
+	rcu_read_unlock();
+
+	kfree(einfo);
+	mutex_unlock(&hwsim_phys_lock);
+
+	return -ENOENT;
+}
+
+/* MAC802154_HWSIM netlink policy */
+
+static const struct nla_policy hwsim_genl_policy[MAC802154_HWSIM_ATTR_MAX + 1] = {
+	[MAC802154_HWSIM_ATTR_RADIO_ID] = { .type = NLA_U32 },
+	[MAC802154_HWSIM_ATTR_RADIO_EDGE] = { .type = NLA_NESTED },
+	[MAC802154_HWSIM_ATTR_RADIO_EDGES] = { .type = NLA_NESTED },
+};
+
+/* Generic Netlink operations array */
+static const struct genl_small_ops hwsim_nl_ops[] = {
+	{
+		.cmd = MAC802154_HWSIM_CMD_NEW_RADIO,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.doit = hwsim_new_radio_nl,
+		.flags = GENL_UNS_ADMIN_PERM,
+	},
+	{
+		.cmd = MAC802154_HWSIM_CMD_DEL_RADIO,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.doit = hwsim_del_radio_nl,
+		.flags = GENL_UNS_ADMIN_PERM,
+	},
+	{
+		.cmd = MAC802154_HWSIM_CMD_GET_RADIO,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.doit = hwsim_get_radio_nl,
+		.dumpit = hwsim_dump_radio_nl,
+	},
+	{
+		.cmd = MAC802154_HWSIM_CMD_NEW_EDGE,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.doit = hwsim_new_edge_nl,
+		.flags = GENL_UNS_ADMIN_PERM,
+	},
+	{
+		.cmd = MAC802154_HWSIM_CMD_DEL_EDGE,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.doit = hwsim_del_edge_nl,
+		.flags = GENL_UNS_ADMIN_PERM,
+	},
+	{
+		.cmd = MAC802154_HWSIM_CMD_SET_EDGE,
+		.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
+		.doit = hwsim_set_edge_lqi,
+		.flags = GENL_UNS_ADMIN_PERM,
+	},
+};
+
+static struct genl_family hwsim_genl_family __ro_after_init = {
+	.name = "MAC802154_HWSIM",
+	.version = 1,
+	.maxattr = MAC802154_HWSIM_ATTR_MAX,
+	.policy = hwsim_genl_policy,
+	.module = THIS_MODULE,
+	.small_ops = hwsim_nl_ops,
+	.n_small_ops = ARRAY_SIZE(hwsim_nl_ops),
+	.resv_start_op = MAC802154_HWSIM_CMD_NEW_EDGE + 1,
+	.mcgrps = hwsim_mcgrps,
+	.n_mcgrps = ARRAY_SIZE(hwsim_mcgrps),
+};
+
+static void hwsim_mcast_config_msg(struct sk_buff *mcast_skb,
+				   struct genl_info *info)
+{
+	if (info)
+		genl_notify(&hwsim_genl_family, mcast_skb, info,
+			    HWSIM_MCGRP_CONFIG, GFP_KERNEL);
+	else
+		genlmsg_multicast(&hwsim_genl_family, mcast_skb, 0,
+				  HWSIM_MCGRP_CONFIG, GFP_KERNEL);
+}
+
+static void hwsim_mcast_new_radio(struct genl_info *info, struct hwsim_phy *phy)
+{
+	struct sk_buff *mcast_skb;
+	void *data;
+
+	mcast_skb = genlmsg_new(GENLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!mcast_skb)
+		return;
+
+	data = genlmsg_put(mcast_skb, 0, 0, &hwsim_genl_family, 0,
+			   MAC802154_HWSIM_CMD_NEW_RADIO);
+	if (!data)
+		goto out_err;
+
+	if (append_radio_msg(mcast_skb, phy) < 0)
+		goto out_err;
+
+	genlmsg_end(mcast_skb, data);
+
+	hwsim_mcast_config_msg(mcast_skb, info);
+	return;
+
+out_err:
+	genlmsg_cancel(mcast_skb, data);
+	nlmsg_free(mcast_skb);
+}
+
+static void hwsim_edge_unsubscribe_me(struct hwsim_phy *phy)
+{
+	struct hwsim_phy *tmp;
+	struct hwsim_edge *e;
+
+	rcu_read_lock();
+	/* going to all phy edges and remove phy from it */
+	list_for_each_entry(tmp, &hwsim_phys, list) {
+		list_for_each_entry_rcu(e, &tmp->edges, list) {
+			if (e->endpoint->idx == phy->idx) {
+				list_del_rcu(&e->list);
+				hwsim_free_edge(e);
+			}
+		}
+	}
+	rcu_read_unlock();
+
+	synchronize_rcu();
+}
+
+static int hwsim_subscribe_all_others(struct hwsim_phy *phy)
+{
+	struct hwsim_phy *sub;
+	struct hwsim_edge *e;
+
+	list_for_each_entry(sub, &hwsim_phys, list) {
+		e = hwsim_alloc_edge(sub, 0xff);
+		if (!e)
+			goto me_fail;
+
+		list_add_rcu(&e->list, &phy->edges);
+	}
+
+	list_for_each_entry(sub, &hwsim_phys, list) {
+		e = hwsim_alloc_edge(phy, 0xff);
+		if (!e)
+			goto sub_fail;
+
+		list_add_rcu(&e->list, &sub->edges);
+	}
+
+	return 0;
+
+sub_fail:
+	hwsim_edge_unsubscribe_me(phy);
+me_fail:
+	rcu_read_lock();
+	list_for_each_entry_rcu(e, &phy->edges, list) {
+		list_del_rcu(&e->list);
+		hwsim_free_edge(e);
+	}
+	rcu_read_unlock();
+	return -ENOMEM;
+}
+
+static int hwsim_add_one(struct genl_info *info, struct device *dev,
+			 bool init)
+{
+	struct ieee802154_hw *hw;
+	struct hwsim_phy *phy;
+	struct hwsim_pib *pib;
+	int idx;
+	int err;
+
+	idx = hwsim_radio_idx++;
+
+	hw = ieee802154_alloc_hw(sizeof(*phy), &hwsim_ops);
+	if (!hw)
+		return -ENOMEM;
+
+	phy = hw->priv;
+	phy->hw = hw;
+
+	/* 868 MHz BPSK	802.15.4-2003 */
+	hw->phy->supported.channels[0] |= 1;
+	/* 915 MHz BPSK	802.15.4-2003 */
+	hw->phy->supported.channels[0] |= 0x7fe;
+	/* 2.4 GHz O-QPSK 802.15.4-2003 */
+	hw->phy->supported.channels[0] |= 0x7FFF800;
+	/* 868 MHz ASK 802.15.4-2006 */
+	hw->phy->supported.channels[1] |= 1;
+	/* 915 MHz ASK 802.15.4-2006 */
+	hw->phy->supported.channels[1] |= 0x7fe;
+	/* 868 MHz O-QPSK 802.15.4-2006 */
+	hw->phy->supported.channels[2] |= 1;
+	/* 915 MHz O-QPSK 802.15.4-2006 */
+	hw->phy->supported.channels[2] |= 0x7fe;
+	/* 2.4 GHz CSS 802.15.4a-2007 */
+	hw->phy->supported.channels[3] |= 0x3fff;
+	/* UWB Sub-gigahertz 802.15.4a-2007 */
+	hw->phy->supported.channels[4] |= 1;
+	/* UWB Low band 802.15.4a-2007 */
+	hw->phy->supported.channels[4] |= 0x1e;
+	/* UWB High band 802.15.4a-2007 */
+	hw->phy->supported.channels[4] |= 0xffe0;
+	/* 750 MHz O-QPSK 802.15.4c-2009 */
+	hw->phy->supported.channels[5] |= 0xf;
+	/* 750 MHz MPSK 802.15.4c-2009 */
+	hw->phy->supported.channels[5] |= 0xf0;
+	/* 950 MHz BPSK 802.15.4d-2009 */
+	hw->phy->supported.channels[6] |= 0x3ff;
+	/* 950 MHz GFSK 802.15.4d-2009 */
+	hw->phy->supported.channels[6] |= 0x3ffc00;
+
+	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
+
+	/* hwsim phy channel 13 as default */
+	hw->phy->current_channel = 13;
+	pib = kzalloc(sizeof(*pib), GFP_KERNEL);
+	if (!pib) {
+		err = -ENOMEM;
+		goto err_pib;
+	}
+
+	pib->channel = 13;
+	rcu_assign_pointer(phy->pib, pib);
+	phy->idx = idx;
+	INIT_LIST_HEAD(&phy->edges);
+
+	hw->flags = IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_RX_DROP_BAD_CKSUM;
+	hw->parent = dev;
+
+	err = ieee802154_register_hw(hw);
+	if (err)
+		goto err_reg;
+
+	mutex_lock(&hwsim_phys_lock);
+	if (init) {
+		err = hwsim_subscribe_all_others(phy);
+		if (err < 0) {
+			mutex_unlock(&hwsim_phys_lock);
+			goto err_subscribe;
+		}
+	}
+	list_add_tail(&phy->list, &hwsim_phys);
+	mutex_unlock(&hwsim_phys_lock);
+
+	hwsim_mcast_new_radio(info, phy);
+
+	return idx;
+
+err_subscribe:
+	ieee802154_unregister_hw(phy->hw);
+err_reg:
+	kfree(pib);
+err_pib:
+	ieee802154_free_hw(phy->hw);
+	return err;
+}
+
+static void hwsim_del(struct hwsim_phy *phy)
+{
+	struct hwsim_pib *pib;
+	struct hwsim_edge *e;
+
+	hwsim_edge_unsubscribe_me(phy);
+
+	list_del(&phy->list);
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(e, &phy->edges, list) {
+		list_del_rcu(&e->list);
+		hwsim_free_edge(e);
+	}
+	pib = rcu_dereference(phy->pib);
+	rcu_read_unlock();
+
+	kfree_rcu(pib, rcu);
+
+	ieee802154_unregister_hw(phy->hw);
+	ieee802154_free_hw(phy->hw);
+}
+
+static int hwsim_probe(struct platform_device *pdev)
+{
+	struct hwsim_phy *phy, *tmp;
+	int err, i;
+
+	for (i = 0; i < 2; i++) {
+		err = hwsim_add_one(NULL, &pdev->dev, true);
+		if (err < 0)
+			goto err_slave;
+	}
+
+	dev_info(&pdev->dev, "Added 2 mac802154 hwsim hardware radios\n");
+	return 0;
+
+err_slave:
+	mutex_lock(&hwsim_phys_lock);
+	list_for_each_entry_safe(phy, tmp, &hwsim_phys, list)
+		hwsim_del(phy);
+	mutex_unlock(&hwsim_phys_lock);
+	return err;
+}
+
+static int hwsim_remove(struct platform_device *pdev)
+{
+	struct hwsim_phy *phy, *tmp;
+
+	mutex_lock(&hwsim_phys_lock);
+	list_for_each_entry_safe(phy, tmp, &hwsim_phys, list)
+		hwsim_del(phy);
+	mutex_unlock(&hwsim_phys_lock);
+
+	return 0;
+}
+
+static struct platform_driver mac802154hwsim_driver = {
+	.probe = hwsim_probe,
+	.remove = hwsim_remove,
+	.driver = {
+			.name = "mac802154_hwsim",
+	},
+};
+
+static __init int hwsim_init_module(void)
+{
+	int rc;
+
+	rc = genl_register_family(&hwsim_genl_family);
+	if (rc)
+		return rc;
+
+	mac802154hwsim_dev = platform_device_register_simple("mac802154_hwsim",
+							     -1, NULL, 0);
+	if (IS_ERR(mac802154hwsim_dev)) {
+		rc = PTR_ERR(mac802154hwsim_dev);
+		goto platform_dev;
+	}
+
+	rc = platform_driver_register(&mac802154hwsim_driver);
+	if (rc < 0)
+		goto platform_drv;
+
+	return 0;
+
+platform_drv:
+	platform_device_unregister(mac802154hwsim_dev);
+platform_dev:
+	genl_unregister_family(&hwsim_genl_family);
+	return rc;
+}
+
+static __exit void hwsim_remove_module(void)
+{
+	genl_unregister_family(&hwsim_genl_family);
+	platform_driver_unregister(&mac802154hwsim_driver);
+	platform_device_unregister(mac802154hwsim_dev);
+}
+
+module_init(hwsim_init_module);
+module_exit(hwsim_remove_module);
diff --git a/drivers/net/ieee802154/mac802154_hwsim.h b/drivers/net/ieee802154/mac802154_hwsim.h
new file mode 100644
index 000000000..6c6e30e38
--- /dev/null
+++ b/drivers/net/ieee802154/mac802154_hwsim.h
@@ -0,0 +1,73 @@
+#ifndef __MAC802154_HWSIM_H
+#define __MAC802154_HWSIM_H
+
+/* mac802154 hwsim netlink commands
+ *
+ * @MAC802154_HWSIM_CMD_UNSPEC: unspecified command to catch error
+ * @MAC802154_HWSIM_CMD_GET_RADIO: fetch information about existing radios
+ * @MAC802154_HWSIM_CMD_SET_RADIO: change radio parameters during runtime
+ * @MAC802154_HWSIM_CMD_NEW_RADIO: create a new radio with the given parameters
+ *	returns the radio ID (>= 0) or negative on errors, if successful
+ *	then multicast the result
+ * @MAC802154_HWSIM_CMD_DEL_RADIO: destroy a radio, reply is multicasted
+ * @MAC802154_HWSIM_CMD_GET_EDGE: fetch information about existing edges
+ * @MAC802154_HWSIM_CMD_SET_EDGE: change edge parameters during runtime
+ * @MAC802154_HWSIM_CMD_DEL_EDGE: delete edges between radios
+ * @MAC802154_HWSIM_CMD_NEW_EDGE: create a new edge between two radios
+ * @__MAC802154_HWSIM_CMD_MAX: enum limit
+ */
+enum {
+	MAC802154_HWSIM_CMD_UNSPEC,
+
+	MAC802154_HWSIM_CMD_GET_RADIO,
+	MAC802154_HWSIM_CMD_SET_RADIO,
+	MAC802154_HWSIM_CMD_NEW_RADIO,
+	MAC802154_HWSIM_CMD_DEL_RADIO,
+
+	MAC802154_HWSIM_CMD_GET_EDGE,
+	MAC802154_HWSIM_CMD_SET_EDGE,
+	MAC802154_HWSIM_CMD_DEL_EDGE,
+	MAC802154_HWSIM_CMD_NEW_EDGE,
+
+	__MAC802154_HWSIM_CMD_MAX,
+};
+
+#define MAC802154_HWSIM_CMD_MAX (__MAC802154_HWSIM_MAX - 1)
+
+/* mac802154 hwsim netlink attributes
+ *
+ * @MAC802154_HWSIM_ATTR_UNSPEC: unspecified attribute to catch error
+ * @MAC802154_HWSIM_ATTR_RADIO_ID: u32 attribute to identify the radio
+ * @MAC802154_HWSIM_ATTR_EDGE: nested attribute of edges
+ * @MAC802154_HWSIM_ATTR_EDGES: list if nested attributes which contains the
+ *	edge information according the radio id
+ * @__MAC802154_HWSIM_ATTR_MAX: enum limit
+ */
+enum {
+	MAC802154_HWSIM_ATTR_UNSPEC,
+	MAC802154_HWSIM_ATTR_RADIO_ID,
+	MAC802154_HWSIM_ATTR_RADIO_EDGE,
+	MAC802154_HWSIM_ATTR_RADIO_EDGES,
+	__MAC802154_HWSIM_ATTR_MAX,
+};
+
+#define MAC802154_HWSIM_ATTR_MAX (__MAC802154_HWSIM_ATTR_MAX - 1)
+
+/* mac802154 hwsim edge netlink attributes
+ *
+ * @MAC802154_HWSIM_EDGE_ATTR_UNSPEC: unspecified attribute to catch error
+ * @MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID: radio id where the edge points to
+ * @MAC802154_HWSIM_EDGE_ATTR_LQI: LQI value which the endpoint radio will
+ *	receive for this edge
+ * @__MAC802154_HWSIM_ATTR_MAX: enum limit
+ */
+enum {
+	MAC802154_HWSIM_EDGE_ATTR_UNSPEC,
+	MAC802154_HWSIM_EDGE_ATTR_ENDPOINT_ID,
+	MAC802154_HWSIM_EDGE_ATTR_LQI,
+	__MAC802154_HWSIM_EDGE_ATTR_MAX,
+};
+
+#define MAC802154_HWSIM_EDGE_ATTR_MAX (__MAC802154_HWSIM_EDGE_ATTR_MAX - 1)
+
+#endif /* __MAC802154_HWSIM_H */
diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c
new file mode 100644
index 000000000..2fe0e4a0a
--- /dev/null
+++ b/drivers/net/ieee802154/mcr20a.c
@@ -0,0 +1,1369 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for NXP MCR20A 802.15.4 Wireless-PAN Networking controller
+ *
+ * Copyright (C) 2018 Xue Liu <liuxuenetmail@gmail.com>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/skbuff.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/ieee802154.h>
+#include <linux/debugfs.h>
+
+#include <net/mac802154.h>
+#include <net/cfg802154.h>
+
+#include <linux/device.h>
+
+#include "mcr20a.h"
+
+#define	SPI_COMMAND_BUFFER		3
+
+#define REGISTER_READ			BIT(7)
+#define REGISTER_WRITE			(0 << 7)
+#define REGISTER_ACCESS			(0 << 6)
+#define PACKET_BUFF_BURST_ACCESS	BIT(6)
+#define PACKET_BUFF_BYTE_ACCESS		BIT(5)
+
+#define MCR20A_WRITE_REG(x)		(x)
+#define MCR20A_READ_REG(x)		(REGISTER_READ | (x))
+#define MCR20A_BURST_READ_PACKET_BUF	(0xC0)
+#define MCR20A_BURST_WRITE_PACKET_BUF	(0x40)
+
+#define MCR20A_CMD_REG		0x80
+#define MCR20A_CMD_REG_MASK	0x3f
+#define MCR20A_CMD_WRITE	0x40
+#define MCR20A_CMD_FB		0x20
+
+/* Number of Interrupt Request Status Register */
+#define MCR20A_IRQSTS_NUM 2 /* only IRQ_STS1 and IRQ_STS2 */
+
+/* MCR20A CCA Type */
+enum {
+	MCR20A_CCA_ED,	  // energy detect - CCA bit not active,
+			  // not to be used for T and CCCA sequences
+	MCR20A_CCA_MODE1, // energy detect - CCA bit ACTIVE
+	MCR20A_CCA_MODE2, // 802.15.4 compliant signal detect - CCA bit ACTIVE
+	MCR20A_CCA_MODE3
+};
+
+enum {
+	MCR20A_XCVSEQ_IDLE	= 0x00,
+	MCR20A_XCVSEQ_RX	= 0x01,
+	MCR20A_XCVSEQ_TX	= 0x02,
+	MCR20A_XCVSEQ_CCA	= 0x03,
+	MCR20A_XCVSEQ_TR	= 0x04,
+	MCR20A_XCVSEQ_CCCA	= 0x05,
+};
+
+/* IEEE-802.15.4 defined constants (2.4 GHz logical channels) */
+#define	MCR20A_MIN_CHANNEL	(11)
+#define	MCR20A_MAX_CHANNEL	(26)
+#define	MCR20A_CHANNEL_SPACING	(5)
+
+/* MCR20A CCA Threshold constans */
+#define MCR20A_MIN_CCA_THRESHOLD (0x6EU)
+#define MCR20A_MAX_CCA_THRESHOLD (0x00U)
+
+/* version 0C */
+#define MCR20A_OVERWRITE_VERSION (0x0C)
+
+/* MCR20A PLL configurations */
+static const u8  PLL_INT[16] = {
+	/* 2405 */ 0x0B,	/* 2410 */ 0x0B,	/* 2415 */ 0x0B,
+	/* 2420 */ 0x0B,	/* 2425 */ 0x0B,	/* 2430 */ 0x0B,
+	/* 2435 */ 0x0C,	/* 2440 */ 0x0C,	/* 2445 */ 0x0C,
+	/* 2450 */ 0x0C,	/* 2455 */ 0x0C,	/* 2460 */ 0x0C,
+	/* 2465 */ 0x0D,	/* 2470 */ 0x0D,	/* 2475 */ 0x0D,
+	/* 2480 */ 0x0D
+};
+
+static const u8 PLL_FRAC[16] = {
+	/* 2405 */ 0x28,	/* 2410 */ 0x50,	/* 2415 */ 0x78,
+	/* 2420 */ 0xA0,	/* 2425 */ 0xC8,	/* 2430 */ 0xF0,
+	/* 2435 */ 0x18,	/* 2440 */ 0x40,	/* 2445 */ 0x68,
+	/* 2450 */ 0x90,	/* 2455 */ 0xB8,	/* 2460 */ 0xE0,
+	/* 2465 */ 0x08,	/* 2470 */ 0x30,	/* 2475 */ 0x58,
+	/* 2480 */ 0x80
+};
+
+static const struct reg_sequence mar20a_iar_overwrites[] = {
+	{ IAR_MISC_PAD_CTRL,	0x02 },
+	{ IAR_VCO_CTRL1,	0xB3 },
+	{ IAR_VCO_CTRL2,	0x07 },
+	{ IAR_PA_TUNING,	0x71 },
+	{ IAR_CHF_IBUF,		0x2F },
+	{ IAR_CHF_QBUF,		0x2F },
+	{ IAR_CHF_IRIN,		0x24 },
+	{ IAR_CHF_QRIN,		0x24 },
+	{ IAR_CHF_IL,		0x24 },
+	{ IAR_CHF_QL,		0x24 },
+	{ IAR_CHF_CC1,		0x32 },
+	{ IAR_CHF_CCL,		0x1D },
+	{ IAR_CHF_CC2,		0x2D },
+	{ IAR_CHF_IROUT,	0x24 },
+	{ IAR_CHF_QROUT,	0x24 },
+	{ IAR_PA_CAL,		0x28 },
+	{ IAR_AGC_THR1,		0x55 },
+	{ IAR_AGC_THR2,		0x2D },
+	{ IAR_ATT_RSSI1,	0x5F },
+	{ IAR_ATT_RSSI2,	0x8F },
+	{ IAR_RSSI_OFFSET,	0x61 },
+	{ IAR_CHF_PMA_GAIN,	0x03 },
+	{ IAR_CCA1_THRESH,	0x50 },
+	{ IAR_CORR_NVAL,	0x13 },
+	{ IAR_ACKDELAY,		0x3D },
+};
+
+#define MCR20A_VALID_CHANNELS (0x07FFF800)
+#define MCR20A_MAX_BUF		(127)
+
+#define printdev(X) (&X->spi->dev)
+
+/* regmap information for Direct Access Register (DAR) access */
+#define MCR20A_DAR_WRITE	0x01
+#define MCR20A_DAR_READ		0x00
+#define MCR20A_DAR_NUMREGS	0x3F
+
+/* regmap information for Indirect Access Register (IAR) access */
+#define MCR20A_IAR_ACCESS	0x80
+#define MCR20A_IAR_NUMREGS	0xBEFF
+
+/* Read/Write SPI Commands for DAR and IAR registers. */
+#define MCR20A_READSHORT(reg)	((reg) << 1)
+#define MCR20A_WRITESHORT(reg)	((reg) << 1 | 1)
+#define MCR20A_READLONG(reg)	(1 << 15 | (reg) << 5)
+#define MCR20A_WRITELONG(reg)	(1 << 15 | (reg) << 5 | 1 << 4)
+
+/* Type definitions for link configuration of instantiable layers  */
+#define MCR20A_PHY_INDIRECT_QUEUE_SIZE (12)
+
+static bool
+mcr20a_dar_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case DAR_IRQ_STS1:
+	case DAR_IRQ_STS2:
+	case DAR_IRQ_STS3:
+	case DAR_PHY_CTRL1:
+	case DAR_PHY_CTRL2:
+	case DAR_PHY_CTRL3:
+	case DAR_PHY_CTRL4:
+	case DAR_SRC_CTRL:
+	case DAR_SRC_ADDRS_SUM_LSB:
+	case DAR_SRC_ADDRS_SUM_MSB:
+	case DAR_T3CMP_LSB:
+	case DAR_T3CMP_MSB:
+	case DAR_T3CMP_USB:
+	case DAR_T2PRIMECMP_LSB:
+	case DAR_T2PRIMECMP_MSB:
+	case DAR_T1CMP_LSB:
+	case DAR_T1CMP_MSB:
+	case DAR_T1CMP_USB:
+	case DAR_T2CMP_LSB:
+	case DAR_T2CMP_MSB:
+	case DAR_T2CMP_USB:
+	case DAR_T4CMP_LSB:
+	case DAR_T4CMP_MSB:
+	case DAR_T4CMP_USB:
+	case DAR_PLL_INT0:
+	case DAR_PLL_FRAC0_LSB:
+	case DAR_PLL_FRAC0_MSB:
+	case DAR_PA_PWR:
+	/* no DAR_ACM */
+	case DAR_OVERWRITE_VER:
+	case DAR_CLK_OUT_CTRL:
+	case DAR_PWR_MODES:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mcr20a_dar_readable(struct device *dev, unsigned int reg)
+{
+	bool rc;
+
+	/* all writeable are also readable */
+	rc = mcr20a_dar_writeable(dev, reg);
+	if (rc)
+		return rc;
+
+	/* readonly regs */
+	switch (reg) {
+	case DAR_RX_FRM_LEN:
+	case DAR_CCA1_ED_FNL:
+	case DAR_EVENT_TMR_LSB:
+	case DAR_EVENT_TMR_MSB:
+	case DAR_EVENT_TMR_USB:
+	case DAR_TIMESTAMP_LSB:
+	case DAR_TIMESTAMP_MSB:
+	case DAR_TIMESTAMP_USB:
+	case DAR_SEQ_STATE:
+	case DAR_LQI_VALUE:
+	case DAR_RSSI_CCA_CONT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mcr20a_dar_volatile(struct device *dev, unsigned int reg)
+{
+	/* can be changed during runtime */
+	switch (reg) {
+	case DAR_IRQ_STS1:
+	case DAR_IRQ_STS2:
+	case DAR_IRQ_STS3:
+	/* use them in spi_async and regmap so it's volatile */
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mcr20a_dar_precious(struct device *dev, unsigned int reg)
+{
+	/* don't clear irq line on read */
+	switch (reg) {
+	case DAR_IRQ_STS1:
+	case DAR_IRQ_STS2:
+	case DAR_IRQ_STS3:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config mcr20a_dar_regmap = {
+	.name			= "mcr20a_dar",
+	.reg_bits		= 8,
+	.val_bits		= 8,
+	.write_flag_mask	= REGISTER_ACCESS | REGISTER_WRITE,
+	.read_flag_mask		= REGISTER_ACCESS | REGISTER_READ,
+	.cache_type		= REGCACHE_RBTREE,
+	.writeable_reg		= mcr20a_dar_writeable,
+	.readable_reg		= mcr20a_dar_readable,
+	.volatile_reg		= mcr20a_dar_volatile,
+	.precious_reg		= mcr20a_dar_precious,
+	.fast_io		= true,
+	.can_multi_write	= true,
+};
+
+static bool
+mcr20a_iar_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case IAR_XTAL_TRIM:
+	case IAR_PMC_LP_TRIM:
+	case IAR_MACPANID0_LSB:
+	case IAR_MACPANID0_MSB:
+	case IAR_MACSHORTADDRS0_LSB:
+	case IAR_MACSHORTADDRS0_MSB:
+	case IAR_MACLONGADDRS0_0:
+	case IAR_MACLONGADDRS0_8:
+	case IAR_MACLONGADDRS0_16:
+	case IAR_MACLONGADDRS0_24:
+	case IAR_MACLONGADDRS0_32:
+	case IAR_MACLONGADDRS0_40:
+	case IAR_MACLONGADDRS0_48:
+	case IAR_MACLONGADDRS0_56:
+	case IAR_RX_FRAME_FILTER:
+	case IAR_PLL_INT1:
+	case IAR_PLL_FRAC1_LSB:
+	case IAR_PLL_FRAC1_MSB:
+	case IAR_MACPANID1_LSB:
+	case IAR_MACPANID1_MSB:
+	case IAR_MACSHORTADDRS1_LSB:
+	case IAR_MACSHORTADDRS1_MSB:
+	case IAR_MACLONGADDRS1_0:
+	case IAR_MACLONGADDRS1_8:
+	case IAR_MACLONGADDRS1_16:
+	case IAR_MACLONGADDRS1_24:
+	case IAR_MACLONGADDRS1_32:
+	case IAR_MACLONGADDRS1_40:
+	case IAR_MACLONGADDRS1_48:
+	case IAR_MACLONGADDRS1_56:
+	case IAR_DUAL_PAN_CTRL:
+	case IAR_DUAL_PAN_DWELL:
+	case IAR_CCA1_THRESH:
+	case IAR_CCA1_ED_OFFSET_COMP:
+	case IAR_LQI_OFFSET_COMP:
+	case IAR_CCA_CTRL:
+	case IAR_CCA2_CORR_PEAKS:
+	case IAR_CCA2_CORR_THRESH:
+	case IAR_TMR_PRESCALE:
+	case IAR_ANT_PAD_CTRL:
+	case IAR_MISC_PAD_CTRL:
+	case IAR_BSM_CTRL:
+	case IAR_RNG:
+	case IAR_RX_WTR_MARK:
+	case IAR_SOFT_RESET:
+	case IAR_TXDELAY:
+	case IAR_ACKDELAY:
+	case IAR_CORR_NVAL:
+	case IAR_ANT_AGC_CTRL:
+	case IAR_AGC_THR1:
+	case IAR_AGC_THR2:
+	case IAR_PA_CAL:
+	case IAR_ATT_RSSI1:
+	case IAR_ATT_RSSI2:
+	case IAR_RSSI_OFFSET:
+	case IAR_XTAL_CTRL:
+	case IAR_CHF_PMA_GAIN:
+	case IAR_CHF_IBUF:
+	case IAR_CHF_QBUF:
+	case IAR_CHF_IRIN:
+	case IAR_CHF_QRIN:
+	case IAR_CHF_IL:
+	case IAR_CHF_QL:
+	case IAR_CHF_CC1:
+	case IAR_CHF_CCL:
+	case IAR_CHF_CC2:
+	case IAR_CHF_IROUT:
+	case IAR_CHF_QROUT:
+	case IAR_PA_TUNING:
+	case IAR_VCO_CTRL1:
+	case IAR_VCO_CTRL2:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mcr20a_iar_readable(struct device *dev, unsigned int reg)
+{
+	bool rc;
+
+	/* all writeable are also readable */
+	rc = mcr20a_iar_writeable(dev, reg);
+	if (rc)
+		return rc;
+
+	/* readonly regs */
+	switch (reg) {
+	case IAR_PART_ID:
+	case IAR_DUAL_PAN_STS:
+	case IAR_RX_BYTE_COUNT:
+	case IAR_FILTERFAIL_CODE1:
+	case IAR_FILTERFAIL_CODE2:
+	case IAR_RSSI:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mcr20a_iar_volatile(struct device *dev, unsigned int reg)
+{
+/* can be changed during runtime */
+	switch (reg) {
+	case IAR_DUAL_PAN_STS:
+	case IAR_RX_BYTE_COUNT:
+	case IAR_FILTERFAIL_CODE1:
+	case IAR_FILTERFAIL_CODE2:
+	case IAR_RSSI:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config mcr20a_iar_regmap = {
+	.name			= "mcr20a_iar",
+	.reg_bits		= 16,
+	.val_bits		= 8,
+	.write_flag_mask	= REGISTER_ACCESS | REGISTER_WRITE | IAR_INDEX,
+	.read_flag_mask		= REGISTER_ACCESS | REGISTER_READ  | IAR_INDEX,
+	.cache_type		= REGCACHE_RBTREE,
+	.writeable_reg		= mcr20a_iar_writeable,
+	.readable_reg		= mcr20a_iar_readable,
+	.volatile_reg		= mcr20a_iar_volatile,
+	.fast_io		= true,
+};
+
+struct mcr20a_local {
+	struct spi_device *spi;
+
+	struct ieee802154_hw *hw;
+	struct regmap *regmap_dar;
+	struct regmap *regmap_iar;
+
+	u8 *buf;
+
+	bool is_tx;
+
+	/* for writing tx buffer */
+	struct spi_message tx_buf_msg;
+	u8 tx_header[1];
+	/* burst buffer write command */
+	struct spi_transfer tx_xfer_header;
+	u8 tx_len[1];
+	/* len of tx packet */
+	struct spi_transfer tx_xfer_len;
+	/* data of tx packet */
+	struct spi_transfer tx_xfer_buf;
+	struct sk_buff *tx_skb;
+
+	/* for read length rxfifo */
+	struct spi_message reg_msg;
+	u8 reg_cmd[1];
+	u8 reg_data[MCR20A_IRQSTS_NUM];
+	struct spi_transfer reg_xfer_cmd;
+	struct spi_transfer reg_xfer_data;
+
+	/* receive handling */
+	struct spi_message rx_buf_msg;
+	u8 rx_header[1];
+	struct spi_transfer rx_xfer_header;
+	u8 rx_lqi[1];
+	struct spi_transfer rx_xfer_lqi;
+	u8 rx_buf[MCR20A_MAX_BUF];
+	struct spi_transfer rx_xfer_buf;
+
+	/* isr handling for reading intstat */
+	struct spi_message irq_msg;
+	u8 irq_header[1];
+	u8 irq_data[MCR20A_IRQSTS_NUM];
+	struct spi_transfer irq_xfer_data;
+	struct spi_transfer irq_xfer_header;
+};
+
+static void
+mcr20a_write_tx_buf_complete(void *context)
+{
+	struct mcr20a_local *lp = context;
+	int ret;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	lp->reg_msg.complete = NULL;
+	lp->reg_cmd[0]	= MCR20A_WRITE_REG(DAR_PHY_CTRL1);
+	lp->reg_data[0] = MCR20A_XCVSEQ_TX;
+	lp->reg_xfer_data.len = 1;
+
+	ret = spi_async(lp->spi, &lp->reg_msg);
+	if (ret)
+		dev_err(printdev(lp), "failed to set SEQ TX\n");
+}
+
+static int
+mcr20a_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct mcr20a_local *lp = hw->priv;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	lp->tx_skb = skb;
+
+	print_hex_dump_debug("mcr20a tx: ", DUMP_PREFIX_OFFSET, 16, 1,
+			     skb->data, skb->len, 0);
+
+	lp->is_tx = 1;
+
+	lp->reg_msg.complete	= NULL;
+	lp->reg_cmd[0]		= MCR20A_WRITE_REG(DAR_PHY_CTRL1);
+	lp->reg_data[0]		= MCR20A_XCVSEQ_IDLE;
+	lp->reg_xfer_data.len	= 1;
+
+	return spi_async(lp->spi, &lp->reg_msg);
+}
+
+static int
+mcr20a_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	WARN_ON(!level);
+	*level = 0xbe;
+	return 0;
+}
+
+static int
+mcr20a_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct mcr20a_local *lp = hw->priv;
+	int ret;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* freqency = ((PLL_INT+64) + (PLL_FRAC/65536)) * 32 MHz */
+	ret = regmap_write(lp->regmap_dar, DAR_PLL_INT0, PLL_INT[channel - 11]);
+	if (ret)
+		return ret;
+	ret = regmap_write(lp->regmap_dar, DAR_PLL_FRAC0_LSB, 0x00);
+	if (ret)
+		return ret;
+	ret = regmap_write(lp->regmap_dar, DAR_PLL_FRAC0_MSB,
+			   PLL_FRAC[channel - 11]);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int
+mcr20a_start(struct ieee802154_hw *hw)
+{
+	struct mcr20a_local *lp = hw->priv;
+	int ret;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* No slotted operation */
+	dev_dbg(printdev(lp), "no slotted operation\n");
+	ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL1,
+				 DAR_PHY_CTRL1_SLOTTED, 0x0);
+	if (ret < 0)
+		return ret;
+
+	/* enable irq */
+	enable_irq(lp->spi->irq);
+
+	/* Unmask SEQ interrupt */
+	ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL2,
+				 DAR_PHY_CTRL2_SEQMSK, 0x0);
+	if (ret < 0)
+		return ret;
+
+	/* Start the RX sequence */
+	dev_dbg(printdev(lp), "start the RX sequence\n");
+	ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL1,
+				 DAR_PHY_CTRL1_XCVSEQ_MASK, MCR20A_XCVSEQ_RX);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void
+mcr20a_stop(struct ieee802154_hw *hw)
+{
+	struct mcr20a_local *lp = hw->priv;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* stop all running sequence */
+	regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL1,
+			   DAR_PHY_CTRL1_XCVSEQ_MASK, MCR20A_XCVSEQ_IDLE);
+
+	/* disable irq */
+	disable_irq(lp->spi->irq);
+}
+
+static int
+mcr20a_set_hw_addr_filt(struct ieee802154_hw *hw,
+			struct ieee802154_hw_addr_filt *filt,
+			unsigned long changed)
+{
+	struct mcr20a_local *lp = hw->priv;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		u16 addr = le16_to_cpu(filt->short_addr);
+
+		regmap_write(lp->regmap_iar, IAR_MACSHORTADDRS0_LSB, addr);
+		regmap_write(lp->regmap_iar, IAR_MACSHORTADDRS0_MSB, addr >> 8);
+	}
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		u16 pan = le16_to_cpu(filt->pan_id);
+
+		regmap_write(lp->regmap_iar, IAR_MACPANID0_LSB, pan);
+		regmap_write(lp->regmap_iar, IAR_MACPANID0_MSB, pan >> 8);
+	}
+
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		u8 addr[8], i;
+
+		memcpy(addr, &filt->ieee_addr, 8);
+		for (i = 0; i < 8; i++)
+			regmap_write(lp->regmap_iar,
+				     IAR_MACLONGADDRS0_0 + i, addr[i]);
+	}
+
+	if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+		if (filt->pan_coord) {
+			regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL4,
+					   DAR_PHY_CTRL4_PANCORDNTR0, 0x10);
+		} else {
+			regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL4,
+					   DAR_PHY_CTRL4_PANCORDNTR0, 0x00);
+		}
+	}
+
+	return 0;
+}
+
+/* -30 dBm to 10 dBm */
+#define MCR20A_MAX_TX_POWERS 0x14
+static const s32 mcr20a_powers[MCR20A_MAX_TX_POWERS + 1] = {
+	-3000, -2800, -2600, -2400, -2200, -2000, -1800, -1600, -1400,
+	-1200, -1000, -800, -600, -400, -200, 0, 200, 400, 600, 800, 1000
+};
+
+static int
+mcr20a_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct mcr20a_local *lp = hw->priv;
+	u32 i;
+
+	dev_dbg(printdev(lp), "%s(%d)\n", __func__, mbm);
+
+	for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) {
+		if (lp->hw->phy->supported.tx_powers[i] == mbm)
+			return regmap_write(lp->regmap_dar, DAR_PA_PWR,
+					    ((i + 8) & 0x1F));
+	}
+
+	return -EINVAL;
+}
+
+#define MCR20A_MAX_ED_LEVELS MCR20A_MIN_CCA_THRESHOLD
+static s32 mcr20a_ed_levels[MCR20A_MAX_ED_LEVELS + 1];
+
+static int
+mcr20a_set_cca_mode(struct ieee802154_hw *hw,
+		    const struct wpan_phy_cca *cca)
+{
+	struct mcr20a_local *lp = hw->priv;
+	unsigned int cca_mode = 0xff;
+	bool cca_mode_and = false;
+	int ret;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* mapping 802.15.4 to driver spec */
+	switch (cca->mode) {
+	case NL802154_CCA_ENERGY:
+		cca_mode = MCR20A_CCA_MODE1;
+		break;
+	case NL802154_CCA_CARRIER:
+		cca_mode = MCR20A_CCA_MODE2;
+		break;
+	case NL802154_CCA_ENERGY_CARRIER:
+		switch (cca->opt) {
+		case NL802154_CCA_OPT_ENERGY_CARRIER_AND:
+			cca_mode = MCR20A_CCA_MODE3;
+			cca_mode_and = true;
+			break;
+		case NL802154_CCA_OPT_ENERGY_CARRIER_OR:
+			cca_mode = MCR20A_CCA_MODE3;
+			cca_mode_and = false;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+	ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL4,
+				 DAR_PHY_CTRL4_CCATYPE_MASK,
+				 cca_mode << DAR_PHY_CTRL4_CCATYPE_SHIFT);
+	if (ret < 0)
+		return ret;
+
+	if (cca_mode == MCR20A_CCA_MODE3) {
+		if (cca_mode_and) {
+			ret = regmap_update_bits(lp->regmap_iar, IAR_CCA_CTRL,
+						 IAR_CCA_CTRL_CCA3_AND_NOT_OR,
+						 0x08);
+		} else {
+			ret = regmap_update_bits(lp->regmap_iar,
+						 IAR_CCA_CTRL,
+						 IAR_CCA_CTRL_CCA3_AND_NOT_OR,
+						 0x00);
+		}
+		if (ret < 0)
+			return ret;
+	}
+
+	return ret;
+}
+
+static int
+mcr20a_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct mcr20a_local *lp = hw->priv;
+	u32 i;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	for (i = 0; i < hw->phy->supported.cca_ed_levels_size; i++) {
+		if (hw->phy->supported.cca_ed_levels[i] == mbm)
+			return regmap_write(lp->regmap_iar, IAR_CCA1_THRESH, i);
+	}
+
+	return 0;
+}
+
+static int
+mcr20a_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
+{
+	struct mcr20a_local *lp = hw->priv;
+	int ret;
+	u8 rx_frame_filter_reg = 0x0;
+
+	dev_dbg(printdev(lp), "%s(%d)\n", __func__, on);
+
+	if (on) {
+		/* All frame types accepted*/
+		rx_frame_filter_reg &= ~(IAR_RX_FRAME_FLT_FRM_VER);
+		rx_frame_filter_reg |= (IAR_RX_FRAME_FLT_ACK_FT |
+				  IAR_RX_FRAME_FLT_NS_FT);
+
+		ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL4,
+					 DAR_PHY_CTRL4_PROMISCUOUS,
+					 DAR_PHY_CTRL4_PROMISCUOUS);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_write(lp->regmap_iar, IAR_RX_FRAME_FILTER,
+				   rx_frame_filter_reg);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL4,
+					 DAR_PHY_CTRL4_PROMISCUOUS, 0x0);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_write(lp->regmap_iar, IAR_RX_FRAME_FILTER,
+				   IAR_RX_FRAME_FLT_FRM_VER |
+				   IAR_RX_FRAME_FLT_BEACON_FT |
+				   IAR_RX_FRAME_FLT_DATA_FT |
+				   IAR_RX_FRAME_FLT_CMD_FT);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct ieee802154_ops mcr20a_hw_ops = {
+	.owner			= THIS_MODULE,
+	.xmit_async		= mcr20a_xmit,
+	.ed			= mcr20a_ed,
+	.set_channel		= mcr20a_set_channel,
+	.start			= mcr20a_start,
+	.stop			= mcr20a_stop,
+	.set_hw_addr_filt	= mcr20a_set_hw_addr_filt,
+	.set_txpower		= mcr20a_set_txpower,
+	.set_cca_mode		= mcr20a_set_cca_mode,
+	.set_cca_ed_level	= mcr20a_set_cca_ed_level,
+	.set_promiscuous_mode	= mcr20a_set_promiscuous_mode,
+};
+
+static int
+mcr20a_request_rx(struct mcr20a_local *lp)
+{
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* Start the RX sequence */
+	regmap_update_bits_async(lp->regmap_dar, DAR_PHY_CTRL1,
+				 DAR_PHY_CTRL1_XCVSEQ_MASK, MCR20A_XCVSEQ_RX);
+
+	return 0;
+}
+
+static void
+mcr20a_handle_rx_read_buf_complete(void *context)
+{
+	struct mcr20a_local *lp = context;
+	u8 len = lp->reg_data[0] & DAR_RX_FRAME_LENGTH_MASK;
+	struct sk_buff *skb;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	dev_dbg(printdev(lp), "RX is done\n");
+
+	if (!ieee802154_is_valid_psdu_len(len)) {
+		dev_vdbg(&lp->spi->dev, "corrupted frame received\n");
+		len = IEEE802154_MTU;
+	}
+
+	len = len - 2;  /* get rid of frame check field */
+
+	skb = dev_alloc_skb(len);
+	if (!skb)
+		return;
+
+	__skb_put_data(skb, lp->rx_buf, len);
+	ieee802154_rx_irqsafe(lp->hw, skb, lp->rx_lqi[0]);
+
+	print_hex_dump_debug("mcr20a rx: ", DUMP_PREFIX_OFFSET, 16, 1,
+			     lp->rx_buf, len, 0);
+	pr_debug("mcr20a rx: lqi: %02hhx\n", lp->rx_lqi[0]);
+
+	/* start RX sequence */
+	mcr20a_request_rx(lp);
+}
+
+static void
+mcr20a_handle_rx_read_len_complete(void *context)
+{
+	struct mcr20a_local *lp = context;
+	u8 len;
+	int ret;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* get the length of received frame */
+	len = lp->reg_data[0] & DAR_RX_FRAME_LENGTH_MASK;
+	dev_dbg(printdev(lp), "frame len : %d\n", len);
+
+	/* prepare to read the rx buf */
+	lp->rx_buf_msg.complete = mcr20a_handle_rx_read_buf_complete;
+	lp->rx_header[0] = MCR20A_BURST_READ_PACKET_BUF;
+	lp->rx_xfer_buf.len = len;
+
+	ret = spi_async(lp->spi, &lp->rx_buf_msg);
+	if (ret)
+		dev_err(printdev(lp), "failed to read rx buffer length\n");
+}
+
+static int
+mcr20a_handle_rx(struct mcr20a_local *lp)
+{
+	dev_dbg(printdev(lp), "%s\n", __func__);
+	lp->reg_msg.complete = mcr20a_handle_rx_read_len_complete;
+	lp->reg_cmd[0] = MCR20A_READ_REG(DAR_RX_FRM_LEN);
+	lp->reg_xfer_data.len	= 1;
+
+	return spi_async(lp->spi, &lp->reg_msg);
+}
+
+static int
+mcr20a_handle_tx_complete(struct mcr20a_local *lp)
+{
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	ieee802154_xmit_complete(lp->hw, lp->tx_skb, false);
+
+	return mcr20a_request_rx(lp);
+}
+
+static int
+mcr20a_handle_tx(struct mcr20a_local *lp)
+{
+	int ret;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* write tx buffer */
+	lp->tx_header[0]	= MCR20A_BURST_WRITE_PACKET_BUF;
+	/* add 2 bytes of FCS */
+	lp->tx_len[0]		= lp->tx_skb->len + 2;
+	lp->tx_xfer_buf.tx_buf	= lp->tx_skb->data;
+	/* add 1 byte psduLength */
+	lp->tx_xfer_buf.len	= lp->tx_skb->len + 1;
+
+	ret = spi_async(lp->spi, &lp->tx_buf_msg);
+	if (ret) {
+		dev_err(printdev(lp), "SPI write Failed for TX buf\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void
+mcr20a_irq_clean_complete(void *context)
+{
+	struct mcr20a_local *lp = context;
+	u8 seq_state = lp->irq_data[DAR_IRQ_STS1] & DAR_PHY_CTRL1_XCVSEQ_MASK;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	enable_irq(lp->spi->irq);
+
+	dev_dbg(printdev(lp), "IRQ STA1 (%02x) STA2 (%02x)\n",
+		lp->irq_data[DAR_IRQ_STS1], lp->irq_data[DAR_IRQ_STS2]);
+
+	switch (seq_state) {
+	/* TX IRQ, RX IRQ and SEQ IRQ */
+	case (DAR_IRQSTS1_TXIRQ | DAR_IRQSTS1_SEQIRQ):
+		if (lp->is_tx) {
+			lp->is_tx = 0;
+			dev_dbg(printdev(lp), "TX is done. No ACK\n");
+			mcr20a_handle_tx_complete(lp);
+		}
+		break;
+	case (DAR_IRQSTS1_RXIRQ | DAR_IRQSTS1_SEQIRQ):
+		/* rx is starting */
+		dev_dbg(printdev(lp), "RX is starting\n");
+		mcr20a_handle_rx(lp);
+		break;
+	case (DAR_IRQSTS1_RXIRQ | DAR_IRQSTS1_TXIRQ | DAR_IRQSTS1_SEQIRQ):
+		if (lp->is_tx) {
+			/* tx is done */
+			lp->is_tx = 0;
+			dev_dbg(printdev(lp), "TX is done. Get ACK\n");
+			mcr20a_handle_tx_complete(lp);
+		} else {
+			/* rx is starting */
+			dev_dbg(printdev(lp), "RX is starting\n");
+			mcr20a_handle_rx(lp);
+		}
+		break;
+	case (DAR_IRQSTS1_SEQIRQ):
+		if (lp->is_tx) {
+			dev_dbg(printdev(lp), "TX is starting\n");
+			mcr20a_handle_tx(lp);
+		} else {
+			dev_dbg(printdev(lp), "MCR20A is stop\n");
+		}
+		break;
+	}
+}
+
+static void mcr20a_irq_status_complete(void *context)
+{
+	int ret;
+	struct mcr20a_local *lp = context;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+	regmap_update_bits_async(lp->regmap_dar, DAR_PHY_CTRL1,
+				 DAR_PHY_CTRL1_XCVSEQ_MASK, MCR20A_XCVSEQ_IDLE);
+
+	lp->reg_msg.complete = mcr20a_irq_clean_complete;
+	lp->reg_cmd[0] = MCR20A_WRITE_REG(DAR_IRQ_STS1);
+	memcpy(lp->reg_data, lp->irq_data, MCR20A_IRQSTS_NUM);
+	lp->reg_xfer_data.len = MCR20A_IRQSTS_NUM;
+
+	ret = spi_async(lp->spi, &lp->reg_msg);
+
+	if (ret)
+		dev_err(printdev(lp), "failed to clean irq status\n");
+}
+
+static irqreturn_t mcr20a_irq_isr(int irq, void *data)
+{
+	struct mcr20a_local *lp = data;
+	int ret;
+
+	disable_irq_nosync(irq);
+
+	lp->irq_header[0] = MCR20A_READ_REG(DAR_IRQ_STS1);
+	/* read IRQSTSx */
+	ret = spi_async(lp->spi, &lp->irq_msg);
+	if (ret) {
+		enable_irq(irq);
+		return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void mcr20a_hw_setup(struct mcr20a_local *lp)
+{
+	u8 i;
+	struct ieee802154_hw *hw = lp->hw;
+	struct wpan_phy *phy = lp->hw->phy;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM |
+			IEEE802154_HW_AFILT |
+			IEEE802154_HW_PROMISCUOUS;
+
+	phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL |
+			WPAN_PHY_FLAG_CCA_MODE;
+
+	phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+		BIT(NL802154_CCA_CARRIER) | BIT(NL802154_CCA_ENERGY_CARRIER);
+	phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
+		BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
+
+	/* initiating cca_ed_levels */
+	for (i = MCR20A_MAX_CCA_THRESHOLD; i < MCR20A_MIN_CCA_THRESHOLD + 1;
+	      ++i) {
+		mcr20a_ed_levels[i] =  -i * 100;
+	}
+
+	phy->supported.cca_ed_levels = mcr20a_ed_levels;
+	phy->supported.cca_ed_levels_size = ARRAY_SIZE(mcr20a_ed_levels);
+
+	phy->cca.mode = NL802154_CCA_ENERGY;
+
+	phy->supported.channels[0] = MCR20A_VALID_CHANNELS;
+	phy->current_page = 0;
+	/* MCR20A default reset value */
+	phy->current_channel = 20;
+	phy->supported.tx_powers = mcr20a_powers;
+	phy->supported.tx_powers_size = ARRAY_SIZE(mcr20a_powers);
+	phy->cca_ed_level = phy->supported.cca_ed_levels[75];
+	phy->transmit_power = phy->supported.tx_powers[0x0F];
+}
+
+static void
+mcr20a_setup_tx_spi_messages(struct mcr20a_local *lp)
+{
+	spi_message_init(&lp->tx_buf_msg);
+	lp->tx_buf_msg.context = lp;
+	lp->tx_buf_msg.complete = mcr20a_write_tx_buf_complete;
+
+	lp->tx_xfer_header.len = 1;
+	lp->tx_xfer_header.tx_buf = lp->tx_header;
+
+	lp->tx_xfer_len.len = 1;
+	lp->tx_xfer_len.tx_buf = lp->tx_len;
+
+	spi_message_add_tail(&lp->tx_xfer_header, &lp->tx_buf_msg);
+	spi_message_add_tail(&lp->tx_xfer_len, &lp->tx_buf_msg);
+	spi_message_add_tail(&lp->tx_xfer_buf, &lp->tx_buf_msg);
+}
+
+static void
+mcr20a_setup_rx_spi_messages(struct mcr20a_local *lp)
+{
+	spi_message_init(&lp->reg_msg);
+	lp->reg_msg.context = lp;
+
+	lp->reg_xfer_cmd.len = 1;
+	lp->reg_xfer_cmd.tx_buf = lp->reg_cmd;
+	lp->reg_xfer_cmd.rx_buf = lp->reg_cmd;
+
+	lp->reg_xfer_data.rx_buf = lp->reg_data;
+	lp->reg_xfer_data.tx_buf = lp->reg_data;
+
+	spi_message_add_tail(&lp->reg_xfer_cmd, &lp->reg_msg);
+	spi_message_add_tail(&lp->reg_xfer_data, &lp->reg_msg);
+
+	spi_message_init(&lp->rx_buf_msg);
+	lp->rx_buf_msg.context = lp;
+	lp->rx_buf_msg.complete = mcr20a_handle_rx_read_buf_complete;
+	lp->rx_xfer_header.len = 1;
+	lp->rx_xfer_header.tx_buf = lp->rx_header;
+	lp->rx_xfer_header.rx_buf = lp->rx_header;
+
+	lp->rx_xfer_buf.rx_buf = lp->rx_buf;
+
+	lp->rx_xfer_lqi.len = 1;
+	lp->rx_xfer_lqi.rx_buf = lp->rx_lqi;
+
+	spi_message_add_tail(&lp->rx_xfer_header, &lp->rx_buf_msg);
+	spi_message_add_tail(&lp->rx_xfer_buf, &lp->rx_buf_msg);
+	spi_message_add_tail(&lp->rx_xfer_lqi, &lp->rx_buf_msg);
+}
+
+static void
+mcr20a_setup_irq_spi_messages(struct mcr20a_local *lp)
+{
+	spi_message_init(&lp->irq_msg);
+	lp->irq_msg.context		= lp;
+	lp->irq_msg.complete	= mcr20a_irq_status_complete;
+	lp->irq_xfer_header.len	= 1;
+	lp->irq_xfer_header.tx_buf = lp->irq_header;
+	lp->irq_xfer_header.rx_buf = lp->irq_header;
+
+	lp->irq_xfer_data.len	= MCR20A_IRQSTS_NUM;
+	lp->irq_xfer_data.rx_buf = lp->irq_data;
+
+	spi_message_add_tail(&lp->irq_xfer_header, &lp->irq_msg);
+	spi_message_add_tail(&lp->irq_xfer_data, &lp->irq_msg);
+}
+
+static int
+mcr20a_phy_init(struct mcr20a_local *lp)
+{
+	u8 index;
+	unsigned int phy_reg = 0;
+	int ret;
+
+	dev_dbg(printdev(lp), "%s\n", __func__);
+
+	/* Disable Tristate on COCO MISO for SPI reads */
+	ret = regmap_write(lp->regmap_iar, IAR_MISC_PAD_CTRL, 0x02);
+	if (ret)
+		goto err_ret;
+
+	/* Clear all PP IRQ bits in IRQSTS1 to avoid unexpected interrupts
+	 * immediately after init
+	 */
+	ret = regmap_write(lp->regmap_dar, DAR_IRQ_STS1, 0xEF);
+	if (ret)
+		goto err_ret;
+
+	/* Clear all PP IRQ bits in IRQSTS2 */
+	ret = regmap_write(lp->regmap_dar, DAR_IRQ_STS2,
+			   DAR_IRQSTS2_ASM_IRQ | DAR_IRQSTS2_PB_ERR_IRQ |
+			   DAR_IRQSTS2_WAKE_IRQ);
+	if (ret)
+		goto err_ret;
+
+	/* Disable all timer interrupts */
+	ret = regmap_write(lp->regmap_dar, DAR_IRQ_STS3, 0xFF);
+	if (ret)
+		goto err_ret;
+
+	/*  PHY_CTRL1 : default HW settings + AUTOACK enabled */
+	ret = regmap_update_bits(lp->regmap_dar, DAR_PHY_CTRL1,
+				 DAR_PHY_CTRL1_AUTOACK, DAR_PHY_CTRL1_AUTOACK);
+
+	/*  PHY_CTRL2 : disable all interrupts */
+	ret = regmap_write(lp->regmap_dar, DAR_PHY_CTRL2, 0xFF);
+	if (ret)
+		goto err_ret;
+
+	/* PHY_CTRL3 : disable all timers and remaining interrupts */
+	ret = regmap_write(lp->regmap_dar, DAR_PHY_CTRL3,
+			   DAR_PHY_CTRL3_ASM_MSK | DAR_PHY_CTRL3_PB_ERR_MSK |
+			   DAR_PHY_CTRL3_WAKE_MSK);
+	if (ret)
+		goto err_ret;
+
+	/* SRC_CTRL : enable Acknowledge Frame Pending and
+	 * Source Address Matching Enable
+	 */
+	ret = regmap_write(lp->regmap_dar, DAR_SRC_CTRL,
+			   DAR_SRC_CTRL_ACK_FRM_PND |
+			   (DAR_SRC_CTRL_INDEX << DAR_SRC_CTRL_INDEX_SHIFT));
+	if (ret)
+		goto err_ret;
+
+	/*  RX_FRAME_FILTER */
+	/*  FRM_VER[1:0] = b11. Accept FrameVersion 0 and 1 packets */
+	ret = regmap_write(lp->regmap_iar, IAR_RX_FRAME_FILTER,
+			   IAR_RX_FRAME_FLT_FRM_VER |
+			   IAR_RX_FRAME_FLT_BEACON_FT |
+			   IAR_RX_FRAME_FLT_DATA_FT |
+			   IAR_RX_FRAME_FLT_CMD_FT);
+	if (ret)
+		goto err_ret;
+
+	dev_info(printdev(lp), "MCR20A DAR overwrites version: 0x%02x\n",
+		 MCR20A_OVERWRITE_VERSION);
+
+	/* Overwrites direct registers  */
+	ret = regmap_write(lp->regmap_dar, DAR_OVERWRITE_VER,
+			   MCR20A_OVERWRITE_VERSION);
+	if (ret)
+		goto err_ret;
+
+	/* Overwrites indirect registers  */
+	ret = regmap_multi_reg_write(lp->regmap_iar, mar20a_iar_overwrites,
+				     ARRAY_SIZE(mar20a_iar_overwrites));
+	if (ret)
+		goto err_ret;
+
+	/* Clear HW indirect queue */
+	dev_dbg(printdev(lp), "clear HW indirect queue\n");
+	for (index = 0; index < MCR20A_PHY_INDIRECT_QUEUE_SIZE; index++) {
+		phy_reg = (u8)(((index & DAR_SRC_CTRL_INDEX) <<
+			       DAR_SRC_CTRL_INDEX_SHIFT)
+			      | (DAR_SRC_CTRL_SRCADDR_EN)
+			      | (DAR_SRC_CTRL_INDEX_DISABLE));
+		ret = regmap_write(lp->regmap_dar, DAR_SRC_CTRL, phy_reg);
+		if (ret)
+			goto err_ret;
+		phy_reg = 0;
+	}
+
+	/* Assign HW Indirect hash table to PAN0 */
+	ret = regmap_read(lp->regmap_iar, IAR_DUAL_PAN_CTRL, &phy_reg);
+	if (ret)
+		goto err_ret;
+
+	/* Clear current lvl */
+	phy_reg &= ~IAR_DUAL_PAN_CTRL_DUAL_PAN_SAM_LVL_MSK;
+
+	/* Set new lvl */
+	phy_reg |= MCR20A_PHY_INDIRECT_QUEUE_SIZE <<
+		IAR_DUAL_PAN_CTRL_DUAL_PAN_SAM_LVL_SHIFT;
+	ret = regmap_write(lp->regmap_iar, IAR_DUAL_PAN_CTRL, phy_reg);
+	if (ret)
+		goto err_ret;
+
+	/* Set CCA threshold to -75 dBm */
+	ret = regmap_write(lp->regmap_iar, IAR_CCA1_THRESH, 0x4B);
+	if (ret)
+		goto err_ret;
+
+	/* Set prescaller to obtain 1 symbol (16us) timebase */
+	ret = regmap_write(lp->regmap_iar, IAR_TMR_PRESCALE, 0x05);
+	if (ret)
+		goto err_ret;
+
+	/* Enable autodoze mode. */
+	ret = regmap_update_bits(lp->regmap_dar, DAR_PWR_MODES,
+				 DAR_PWR_MODES_AUTODOZE,
+				 DAR_PWR_MODES_AUTODOZE);
+	if (ret)
+		goto err_ret;
+
+	/* Disable clk_out */
+	ret = regmap_update_bits(lp->regmap_dar, DAR_CLK_OUT_CTRL,
+				 DAR_CLK_OUT_CTRL_EN, 0x0);
+	if (ret)
+		goto err_ret;
+
+	return 0;
+
+err_ret:
+	return ret;
+}
+
+static int
+mcr20a_probe(struct spi_device *spi)
+{
+	struct ieee802154_hw *hw;
+	struct mcr20a_local *lp;
+	struct gpio_desc *rst_b;
+	int irq_type;
+	int ret = -ENOMEM;
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	if (!spi->irq) {
+		dev_err(&spi->dev, "no IRQ specified\n");
+		return -EINVAL;
+	}
+
+	rst_b = devm_gpiod_get(&spi->dev, "rst_b", GPIOD_OUT_HIGH);
+	if (IS_ERR(rst_b)) {
+		ret = PTR_ERR(rst_b);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&spi->dev, "Failed to get 'rst_b' gpio: %d", ret);
+		return ret;
+	}
+
+	/* reset mcr20a */
+	usleep_range(10, 20);
+	gpiod_set_value_cansleep(rst_b, 1);
+	usleep_range(10, 20);
+	gpiod_set_value_cansleep(rst_b, 0);
+	usleep_range(120, 240);
+
+	/* allocate ieee802154_hw and private data */
+	hw = ieee802154_alloc_hw(sizeof(*lp), &mcr20a_hw_ops);
+	if (!hw) {
+		dev_crit(&spi->dev, "ieee802154_alloc_hw failed\n");
+		return ret;
+	}
+
+	/* init mcr20a local data */
+	lp = hw->priv;
+	lp->hw = hw;
+	lp->spi = spi;
+
+	/* init ieee802154_hw */
+	hw->parent = &spi->dev;
+	ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
+
+	/* init buf */
+	lp->buf = devm_kzalloc(&spi->dev, SPI_COMMAND_BUFFER, GFP_KERNEL);
+
+	if (!lp->buf) {
+		ret = -ENOMEM;
+		goto free_dev;
+	}
+
+	mcr20a_setup_tx_spi_messages(lp);
+	mcr20a_setup_rx_spi_messages(lp);
+	mcr20a_setup_irq_spi_messages(lp);
+
+	/* setup regmap */
+	lp->regmap_dar = devm_regmap_init_spi(spi, &mcr20a_dar_regmap);
+	if (IS_ERR(lp->regmap_dar)) {
+		ret = PTR_ERR(lp->regmap_dar);
+		dev_err(&spi->dev, "Failed to allocate dar map: %d\n",
+			ret);
+		goto free_dev;
+	}
+
+	lp->regmap_iar = devm_regmap_init_spi(spi, &mcr20a_iar_regmap);
+	if (IS_ERR(lp->regmap_iar)) {
+		ret = PTR_ERR(lp->regmap_iar);
+		dev_err(&spi->dev, "Failed to allocate iar map: %d\n", ret);
+		goto free_dev;
+	}
+
+	mcr20a_hw_setup(lp);
+
+	spi_set_drvdata(spi, lp);
+
+	ret = mcr20a_phy_init(lp);
+	if (ret < 0) {
+		dev_crit(&spi->dev, "mcr20a_phy_init failed\n");
+		goto free_dev;
+	}
+
+	irq_type = irq_get_trigger_type(spi->irq);
+	if (!irq_type)
+		irq_type = IRQF_TRIGGER_FALLING;
+
+	ret = devm_request_irq(&spi->dev, spi->irq, mcr20a_irq_isr,
+			       irq_type, dev_name(&spi->dev), lp);
+	if (ret) {
+		dev_err(&spi->dev, "could not request_irq for mcr20a\n");
+		ret = -ENODEV;
+		goto free_dev;
+	}
+
+	/* disable_irq by default and wait for starting hardware */
+	disable_irq(spi->irq);
+
+	ret = ieee802154_register_hw(hw);
+	if (ret) {
+		dev_crit(&spi->dev, "ieee802154_register_hw failed\n");
+		goto free_dev;
+	}
+
+	return ret;
+
+free_dev:
+	ieee802154_free_hw(lp->hw);
+
+	return ret;
+}
+
+static void mcr20a_remove(struct spi_device *spi)
+{
+	struct mcr20a_local *lp = spi_get_drvdata(spi);
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	ieee802154_unregister_hw(lp->hw);
+	ieee802154_free_hw(lp->hw);
+}
+
+static const struct of_device_id mcr20a_of_match[] = {
+	{ .compatible = "nxp,mcr20a", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mcr20a_of_match);
+
+static const struct spi_device_id mcr20a_device_id[] = {
+	{ .name = "mcr20a", },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, mcr20a_device_id);
+
+static struct spi_driver mcr20a_driver = {
+	.id_table = mcr20a_device_id,
+	.driver = {
+		.of_match_table = of_match_ptr(mcr20a_of_match),
+		.name	= "mcr20a",
+	},
+	.probe      = mcr20a_probe,
+	.remove     = mcr20a_remove,
+};
+
+module_spi_driver(mcr20a_driver);
+
+MODULE_DESCRIPTION("MCR20A Transceiver Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Xue Liu <liuxuenetmail@gmail>");
diff --git a/drivers/net/ieee802154/mcr20a.h b/drivers/net/ieee802154/mcr20a.h
new file mode 100644
index 000000000..b363b0a3b
--- /dev/null
+++ b/drivers/net/ieee802154/mcr20a.h
@@ -0,0 +1,489 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Driver for NXP MCR20A 802.15.4 Wireless-PAN Networking controller
+ *
+ * Copyright (C) 2018 Xue Liu <liuxuenetmail@gmail.com>
+ */
+#ifndef _MCR20A_H
+#define _MCR20A_H
+
+/* Direct Accress Register */
+#define DAR_IRQ_STS1		0x00
+#define DAR_IRQ_STS2		0x01
+#define DAR_IRQ_STS3		0x02
+#define DAR_PHY_CTRL1		0x03
+#define DAR_PHY_CTRL2		0x04
+#define DAR_PHY_CTRL3		0x05
+#define DAR_RX_FRM_LEN		0x06
+#define DAR_PHY_CTRL4		0x07
+#define DAR_SRC_CTRL		0x08
+#define DAR_SRC_ADDRS_SUM_LSB	0x09
+#define DAR_SRC_ADDRS_SUM_MSB	0x0A
+#define DAR_CCA1_ED_FNL		0x0B
+#define DAR_EVENT_TMR_LSB	0x0C
+#define DAR_EVENT_TMR_MSB	0x0D
+#define DAR_EVENT_TMR_USB	0x0E
+#define DAR_TIMESTAMP_LSB	0x0F
+#define DAR_TIMESTAMP_MSB	0x10
+#define DAR_TIMESTAMP_USB	0x11
+#define DAR_T3CMP_LSB		0x12
+#define DAR_T3CMP_MSB		0x13
+#define DAR_T3CMP_USB		0x14
+#define DAR_T2PRIMECMP_LSB	0x15
+#define DAR_T2PRIMECMP_MSB	0x16
+#define DAR_T1CMP_LSB		0x17
+#define DAR_T1CMP_MSB		0x18
+#define DAR_T1CMP_USB		0x19
+#define DAR_T2CMP_LSB		0x1A
+#define DAR_T2CMP_MSB		0x1B
+#define DAR_T2CMP_USB		0x1C
+#define DAR_T4CMP_LSB		0x1D
+#define DAR_T4CMP_MSB		0x1E
+#define DAR_T4CMP_USB		0x1F
+#define DAR_PLL_INT0		0x20
+#define DAR_PLL_FRAC0_LSB	0x21
+#define DAR_PLL_FRAC0_MSB	0x22
+#define DAR_PA_PWR		0x23
+#define DAR_SEQ_STATE		0x24
+#define DAR_LQI_VALUE		0x25
+#define DAR_RSSI_CCA_CONT	0x26
+/*------------------            0x27 */
+#define DAR_ASM_CTRL1		0x28
+#define DAR_ASM_CTRL2		0x29
+#define DAR_ASM_DATA_0		0x2A
+#define DAR_ASM_DATA_1		0x2B
+#define DAR_ASM_DATA_2		0x2C
+#define DAR_ASM_DATA_3		0x2D
+#define DAR_ASM_DATA_4		0x2E
+#define DAR_ASM_DATA_5		0x2F
+#define DAR_ASM_DATA_6		0x30
+#define DAR_ASM_DATA_7		0x31
+#define DAR_ASM_DATA_8		0x32
+#define DAR_ASM_DATA_9		0x33
+#define DAR_ASM_DATA_A		0x34
+#define DAR_ASM_DATA_B		0x35
+#define DAR_ASM_DATA_C		0x36
+#define DAR_ASM_DATA_D		0x37
+#define DAR_ASM_DATA_E		0x38
+#define DAR_ASM_DATA_F		0x39
+/*-----------------------       0x3A */
+#define DAR_OVERWRITE_VER	0x3B
+#define DAR_CLK_OUT_CTRL	0x3C
+#define DAR_PWR_MODES		0x3D
+#define IAR_INDEX		0x3E
+#define IAR_DATA		0x3F
+
+/* Indirect Resgister Memory */
+#define IAR_PART_ID		0x00
+#define IAR_XTAL_TRIM		0x01
+#define IAR_PMC_LP_TRIM		0x02
+#define IAR_MACPANID0_LSB	0x03
+#define IAR_MACPANID0_MSB	0x04
+#define IAR_MACSHORTADDRS0_LSB	0x05
+#define IAR_MACSHORTADDRS0_MSB	0x06
+#define IAR_MACLONGADDRS0_0	0x07
+#define IAR_MACLONGADDRS0_8	0x08
+#define IAR_MACLONGADDRS0_16	0x09
+#define IAR_MACLONGADDRS0_24	0x0A
+#define IAR_MACLONGADDRS0_32	0x0B
+#define IAR_MACLONGADDRS0_40	0x0C
+#define IAR_MACLONGADDRS0_48	0x0D
+#define IAR_MACLONGADDRS0_56	0x0E
+#define IAR_RX_FRAME_FILTER	0x0F
+#define IAR_PLL_INT1		0x10
+#define IAR_PLL_FRAC1_LSB	0x11
+#define IAR_PLL_FRAC1_MSB	0x12
+#define IAR_MACPANID1_LSB	0x13
+#define IAR_MACPANID1_MSB	0x14
+#define IAR_MACSHORTADDRS1_LSB	0x15
+#define IAR_MACSHORTADDRS1_MSB	0x16
+#define IAR_MACLONGADDRS1_0	0x17
+#define IAR_MACLONGADDRS1_8	0x18
+#define IAR_MACLONGADDRS1_16	0x19
+#define IAR_MACLONGADDRS1_24	0x1A
+#define IAR_MACLONGADDRS1_32	0x1B
+#define IAR_MACLONGADDRS1_40	0x1C
+#define IAR_MACLONGADDRS1_48	0x1D
+#define IAR_MACLONGADDRS1_56	0x1E
+#define IAR_DUAL_PAN_CTRL	0x1F
+#define IAR_DUAL_PAN_DWELL	0x20
+#define IAR_DUAL_PAN_STS	0x21
+#define IAR_CCA1_THRESH		0x22
+#define IAR_CCA1_ED_OFFSET_COMP	0x23
+#define IAR_LQI_OFFSET_COMP	0x24
+#define IAR_CCA_CTRL		0x25
+#define IAR_CCA2_CORR_PEAKS	0x26
+#define IAR_CCA2_CORR_THRESH	0x27
+#define IAR_TMR_PRESCALE	0x28
+/*--------------------          0x29 */
+#define IAR_GPIO_DATA		0x2A
+#define IAR_GPIO_DIR		0x2B
+#define IAR_GPIO_PUL_EN		0x2C
+#define IAR_GPIO_PUL_SEL	0x2D
+#define IAR_GPIO_DS		0x2E
+/*------------------            0x2F */
+#define IAR_ANT_PAD_CTRL	0x30
+#define IAR_MISC_PAD_CTRL	0x31
+#define IAR_BSM_CTRL		0x32
+/*-------------------           0x33 */
+#define IAR_RNG			0x34
+#define IAR_RX_BYTE_COUNT	0x35
+#define IAR_RX_WTR_MARK		0x36
+#define IAR_SOFT_RESET		0x37
+#define IAR_TXDELAY		0x38
+#define IAR_ACKDELAY		0x39
+#define IAR_SEQ_MGR_CTRL	0x3A
+#define IAR_SEQ_MGR_STS		0x3B
+#define IAR_SEQ_T_STS		0x3C
+#define IAR_ABORT_STS		0x3D
+#define IAR_CCCA_BUSY_CNT	0x3E
+#define IAR_SRC_ADDR_CHECKSUM1	0x3F
+#define IAR_SRC_ADDR_CHECKSUM2	0x40
+#define IAR_SRC_TBL_VALID1	0x41
+#define IAR_SRC_TBL_VALID2	0x42
+#define IAR_FILTERFAIL_CODE1	0x43
+#define IAR_FILTERFAIL_CODE2	0x44
+#define IAR_SLOT_PRELOAD	0x45
+/*--------------------          0x46 */
+#define IAR_CORR_VT		0x47
+#define IAR_SYNC_CTRL		0x48
+#define IAR_PN_LSB_0		0x49
+#define IAR_PN_LSB_1		0x4A
+#define IAR_PN_MSB_0		0x4B
+#define IAR_PN_MSB_1		0x4C
+#define IAR_CORR_NVAL		0x4D
+#define IAR_TX_MODE_CTRL	0x4E
+#define IAR_SNF_THR		0x4F
+#define IAR_FAD_THR		0x50
+#define IAR_ANT_AGC_CTRL	0x51
+#define IAR_AGC_THR1		0x52
+#define IAR_AGC_THR2		0x53
+#define IAR_AGC_HYS		0x54
+#define IAR_AFC			0x55
+/*-------------------           0x56 */
+/*-------------------           0x57 */
+#define IAR_PHY_STS		0x58
+#define IAR_RX_MAX_CORR		0x59
+#define IAR_RX_MAX_PREAMBLE	0x5A
+#define IAR_RSSI		0x5B
+/*-------------------           0x5C */
+/*-------------------           0x5D */
+#define IAR_PLL_DIG_CTRL	0x5E
+#define IAR_VCO_CAL		0x5F
+#define IAR_VCO_BEST_DIFF	0x60
+#define IAR_VCO_BIAS		0x61
+#define IAR_KMOD_CTRL		0x62
+#define IAR_KMOD_CAL		0x63
+#define IAR_PA_CAL		0x64
+#define IAR_PA_PWRCAL		0x65
+#define IAR_ATT_RSSI1		0x66
+#define IAR_ATT_RSSI2		0x67
+#define IAR_RSSI_OFFSET		0x68
+#define IAR_RSSI_SLOPE		0x69
+#define IAR_RSSI_CAL1		0x6A
+#define IAR_RSSI_CAL2		0x6B
+/*-------------------           0x6C */
+/*-------------------           0x6D */
+#define IAR_XTAL_CTRL		0x6E
+#define IAR_XTAL_COMP_MIN	0x6F
+#define IAR_XTAL_COMP_MAX	0x70
+#define IAR_XTAL_GM		0x71
+/*-------------------           0x72 */
+/*-------------------           0x73 */
+#define IAR_LNA_TUNE		0x74
+#define IAR_LNA_AGCGAIN		0x75
+/*-------------------           0x76 */
+/*-------------------           0x77 */
+#define IAR_CHF_PMA_GAIN	0x78
+#define IAR_CHF_IBUF		0x79
+#define IAR_CHF_QBUF		0x7A
+#define IAR_CHF_IRIN		0x7B
+#define IAR_CHF_QRIN		0x7C
+#define IAR_CHF_IL		0x7D
+#define IAR_CHF_QL		0x7E
+#define IAR_CHF_CC1		0x7F
+#define IAR_CHF_CCL		0x80
+#define IAR_CHF_CC2		0x81
+#define IAR_CHF_IROUT		0x82
+#define IAR_CHF_QROUT		0x83
+/*-------------------           0x84 */
+/*-------------------           0x85 */
+#define IAR_RSSI_CTRL		0x86
+/*-------------------           0x87 */
+/*-------------------           0x88 */
+#define IAR_PA_BIAS		0x89
+#define IAR_PA_TUNING		0x8A
+/*-------------------           0x8B */
+/*-------------------           0x8C */
+#define IAR_PMC_HP_TRIM		0x8D
+#define IAR_VREGA_TRIM		0x8E
+/*-------------------           0x8F */
+/*-------------------           0x90 */
+#define IAR_VCO_CTRL1		0x91
+#define IAR_VCO_CTRL2		0x92
+/*-------------------           0x93 */
+/*-------------------           0x94 */
+#define IAR_ANA_SPARE_OUT1	0x95
+#define IAR_ANA_SPARE_OUT2	0x96
+#define IAR_ANA_SPARE_IN	0x97
+#define IAR_MISCELLANEOUS	0x98
+/*-------------------           0x99 */
+#define IAR_SEQ_MGR_OVRD0	0x9A
+#define IAR_SEQ_MGR_OVRD1	0x9B
+#define IAR_SEQ_MGR_OVRD2	0x9C
+#define IAR_SEQ_MGR_OVRD3	0x9D
+#define IAR_SEQ_MGR_OVRD4	0x9E
+#define IAR_SEQ_MGR_OVRD5	0x9F
+#define IAR_SEQ_MGR_OVRD6	0xA0
+#define IAR_SEQ_MGR_OVRD7	0xA1
+/*-------------------           0xA2 */
+#define IAR_TESTMODE_CTRL	0xA3
+#define IAR_DTM_CTRL1		0xA4
+#define IAR_DTM_CTRL2		0xA5
+#define IAR_ATM_CTRL1		0xA6
+#define IAR_ATM_CTRL2		0xA7
+#define IAR_ATM_CTRL3		0xA8
+/*-------------------           0xA9 */
+#define IAR_LIM_FE_TEST_CTRL	0xAA
+#define IAR_CHF_TEST_CTRL	0xAB
+#define IAR_VCO_TEST_CTRL	0xAC
+#define IAR_PLL_TEST_CTRL	0xAD
+#define IAR_PA_TEST_CTRL	0xAE
+#define IAR_PMC_TEST_CTRL	0xAF
+#define IAR_SCAN_DTM_PROTECT_1	0xFE
+#define IAR_SCAN_DTM_PROTECT_0	0xFF
+
+/* IRQSTS1 bits */
+#define DAR_IRQSTS1_RX_FRM_PEND		BIT(7)
+#define DAR_IRQSTS1_PLL_UNLOCK_IRQ	BIT(6)
+#define DAR_IRQSTS1_FILTERFAIL_IRQ	BIT(5)
+#define DAR_IRQSTS1_RXWTRMRKIRQ		BIT(4)
+#define DAR_IRQSTS1_CCAIRQ		BIT(3)
+#define DAR_IRQSTS1_RXIRQ		BIT(2)
+#define DAR_IRQSTS1_TXIRQ		BIT(1)
+#define DAR_IRQSTS1_SEQIRQ		BIT(0)
+
+/* IRQSTS2 bits */
+#define DAR_IRQSTS2_CRCVALID		BIT(7)
+#define DAR_IRQSTS2_CCA			BIT(6)
+#define DAR_IRQSTS2_SRCADDR		BIT(5)
+#define DAR_IRQSTS2_PI			BIT(4)
+#define DAR_IRQSTS2_TMRSTATUS		BIT(3)
+#define DAR_IRQSTS2_ASM_IRQ		BIT(2)
+#define DAR_IRQSTS2_PB_ERR_IRQ		BIT(1)
+#define DAR_IRQSTS2_WAKE_IRQ		BIT(0)
+
+/* IRQSTS3 bits */
+#define DAR_IRQSTS3_TMR4MSK		BIT(7)
+#define DAR_IRQSTS3_TMR3MSK		BIT(6)
+#define DAR_IRQSTS3_TMR2MSK		BIT(5)
+#define DAR_IRQSTS3_TMR1MSK		BIT(4)
+#define DAR_IRQSTS3_TMR4IRQ		BIT(3)
+#define DAR_IRQSTS3_TMR3IRQ		BIT(2)
+#define DAR_IRQSTS3_TMR2IRQ		BIT(1)
+#define DAR_IRQSTS3_TMR1IRQ		BIT(0)
+
+/* PHY_CTRL1 bits */
+#define DAR_PHY_CTRL1_TMRTRIGEN		BIT(7)
+#define DAR_PHY_CTRL1_SLOTTED		BIT(6)
+#define DAR_PHY_CTRL1_CCABFRTX		BIT(5)
+#define DAR_PHY_CTRL1_CCABFRTX_SHIFT	5
+#define DAR_PHY_CTRL1_RXACKRQD		BIT(4)
+#define DAR_PHY_CTRL1_AUTOACK		BIT(3)
+#define DAR_PHY_CTRL1_XCVSEQ_MASK	0x07
+
+/* PHY_CTRL2 bits */
+#define DAR_PHY_CTRL2_CRC_MSK		BIT(7)
+#define DAR_PHY_CTRL2_PLL_UNLOCK_MSK	BIT(6)
+#define DAR_PHY_CTRL2_FILTERFAIL_MSK	BIT(5)
+#define DAR_PHY_CTRL2_RX_WMRK_MSK	BIT(4)
+#define DAR_PHY_CTRL2_CCAMSK		BIT(3)
+#define DAR_PHY_CTRL2_RXMSK		BIT(2)
+#define DAR_PHY_CTRL2_TXMSK		BIT(1)
+#define DAR_PHY_CTRL2_SEQMSK		BIT(0)
+
+/* PHY_CTRL3 bits */
+#define DAR_PHY_CTRL3_TMR4CMP_EN	BIT(7)
+#define DAR_PHY_CTRL3_TMR3CMP_EN	BIT(6)
+#define DAR_PHY_CTRL3_TMR2CMP_EN	BIT(5)
+#define DAR_PHY_CTRL3_TMR1CMP_EN	BIT(4)
+#define DAR_PHY_CTRL3_ASM_MSK		BIT(2)
+#define DAR_PHY_CTRL3_PB_ERR_MSK	BIT(1)
+#define DAR_PHY_CTRL3_WAKE_MSK		BIT(0)
+
+/* RX_FRM_LEN bits */
+#define DAR_RX_FRAME_LENGTH_MASK	(0x7F)
+
+/* PHY_CTRL4 bits */
+#define DAR_PHY_CTRL4_TRCV_MSK		BIT(7)
+#define DAR_PHY_CTRL4_TC3TMOUT		BIT(6)
+#define DAR_PHY_CTRL4_PANCORDNTR0	BIT(5)
+#define DAR_PHY_CTRL4_CCATYPE		(3)
+#define DAR_PHY_CTRL4_CCATYPE_SHIFT	(3)
+#define DAR_PHY_CTRL4_CCATYPE_MASK	(0x18)
+#define DAR_PHY_CTRL4_TMRLOAD		BIT(2)
+#define DAR_PHY_CTRL4_PROMISCUOUS	BIT(1)
+#define DAR_PHY_CTRL4_TC2PRIME_EN	BIT(0)
+
+/* SRC_CTRL bits */
+#define DAR_SRC_CTRL_INDEX		(0x0F)
+#define DAR_SRC_CTRL_INDEX_SHIFT	(4)
+#define DAR_SRC_CTRL_ACK_FRM_PND	BIT(3)
+#define DAR_SRC_CTRL_SRCADDR_EN		BIT(2)
+#define DAR_SRC_CTRL_INDEX_EN		BIT(1)
+#define DAR_SRC_CTRL_INDEX_DISABLE	BIT(0)
+
+/* DAR_ASM_CTRL1 bits */
+#define DAR_ASM_CTRL1_CLEAR		BIT(7)
+#define DAR_ASM_CTRL1_START		BIT(6)
+#define DAR_ASM_CTRL1_SELFTST		BIT(5)
+#define DAR_ASM_CTRL1_CTR		BIT(4)
+#define DAR_ASM_CTRL1_CBC		BIT(3)
+#define DAR_ASM_CTRL1_AES		BIT(2)
+#define DAR_ASM_CTRL1_LOAD_MAC		BIT(1)
+
+/* DAR_ASM_CTRL2 bits */
+#define DAR_ASM_CTRL2_DATA_REG_TYPE_SEL		(7)
+#define DAR_ASM_CTRL2_DATA_REG_TYPE_SEL_SHIFT	(5)
+#define DAR_ASM_CTRL2_TSTPAS			BIT(1)
+
+/* DAR_CLK_OUT_CTRL bits */
+#define DAR_CLK_OUT_CTRL_EXTEND		BIT(7)
+#define DAR_CLK_OUT_CTRL_HIZ		BIT(6)
+#define DAR_CLK_OUT_CTRL_SR		BIT(5)
+#define DAR_CLK_OUT_CTRL_DS		BIT(4)
+#define DAR_CLK_OUT_CTRL_EN		BIT(3)
+#define DAR_CLK_OUT_CTRL_DIV		(7)
+
+/* DAR_PWR_MODES bits */
+#define DAR_PWR_MODES_XTAL_READY	BIT(5)
+#define DAR_PWR_MODES_XTALEN		BIT(4)
+#define DAR_PWR_MODES_ASM_CLK_EN	BIT(3)
+#define DAR_PWR_MODES_AUTODOZE		BIT(1)
+#define DAR_PWR_MODES_PMC_MODE		BIT(0)
+
+/* RX_FRAME_FILTER bits */
+#define IAR_RX_FRAME_FLT_FRM_VER		(0xC0)
+#define IAR_RX_FRAME_FLT_FRM_VER_SHIFT		(6)
+#define IAR_RX_FRAME_FLT_ACTIVE_PROMISCUOUS	BIT(5)
+#define IAR_RX_FRAME_FLT_NS_FT			BIT(4)
+#define IAR_RX_FRAME_FLT_CMD_FT			BIT(3)
+#define IAR_RX_FRAME_FLT_ACK_FT			BIT(2)
+#define IAR_RX_FRAME_FLT_DATA_FT		BIT(1)
+#define IAR_RX_FRAME_FLT_BEACON_FT		BIT(0)
+
+/* DUAL_PAN_CTRL bits */
+#define IAR_DUAL_PAN_CTRL_DUAL_PAN_SAM_LVL_MSK	(0xF0)
+#define IAR_DUAL_PAN_CTRL_DUAL_PAN_SAM_LVL_SHIFT	(4)
+#define IAR_DUAL_PAN_CTRL_CURRENT_NETWORK	BIT(3)
+#define IAR_DUAL_PAN_CTRL_PANCORDNTR1		BIT(2)
+#define IAR_DUAL_PAN_CTRL_DUAL_PAN_AUTO		BIT(1)
+#define IAR_DUAL_PAN_CTRL_ACTIVE_NETWORK	BIT(0)
+
+/* DUAL_PAN_STS bits */
+#define IAR_DUAL_PAN_STS_RECD_ON_PAN1		BIT(7)
+#define IAR_DUAL_PAN_STS_RECD_ON_PAN0		BIT(6)
+#define IAR_DUAL_PAN_STS_DUAL_PAN_REMAIN	(0x3F)
+
+/* CCA_CTRL bits */
+#define IAR_CCA_CTRL_AGC_FRZ_EN			BIT(6)
+#define IAR_CCA_CTRL_CONT_RSSI_EN		BIT(5)
+#define IAR_CCA_CTRL_LQI_RSSI_NOT_CORR	BIT(4)
+#define IAR_CCA_CTRL_CCA3_AND_NOT_OR	BIT(3)
+#define IAR_CCA_CTRL_POWER_COMP_EN_LQI	BIT(2)
+#define IAR_CCA_CTRL_POWER_COMP_EN_ED	BIT(1)
+#define IAR_CCA_CTRL_POWER_COMP_EN_CCA1	BIT(0)
+
+/* ANT_PAD_CTRL bits */
+#define IAR_ANT_PAD_CTRL_ANTX_POL	(0x0F)
+#define IAR_ANT_PAD_CTRL_ANTX_POL_SHIFT	(4)
+#define IAR_ANT_PAD_CTRL_ANTX_CTRLMODE	BIT(3)
+#define IAR_ANT_PAD_CTRL_ANTX_HZ	BIT(2)
+#define IAR_ANT_PAD_CTRL_ANTX_EN	(3)
+
+/* MISC_PAD_CTRL bits */
+#define IAR_MISC_PAD_CTRL_MISO_HIZ_EN	BIT(3)
+#define IAR_MISC_PAD_CTRL_IRQ_B_OD	BIT(2)
+#define IAR_MISC_PAD_CTRL_NON_GPIO_DS	BIT(1)
+#define IAR_MISC_PAD_CTRL_ANTX_CURR	(1)
+
+/* ANT_AGC_CTRL bits */
+#define IAR_ANT_AGC_CTRL_FAD_EN_SHIFT	(0)
+#define IAR_ANT_AGC_CTRL_FAD_EN_MASK	(1)
+#define IAR_ANT_AGC_CTRL_ANTX_SHIFT	(1)
+#define IAR_ANT_AGC_CTRL_ANTX_MASK	BIT(AR_ANT_AGC_CTRL_ANTX_SHIFT)
+
+/* BSM_CTRL bits */
+#define BSM_CTRL_BSM_EN		(1)
+
+/* SOFT_RESET bits */
+#define IAR_SOFT_RESET_SOG_RST		BIT(7)
+#define IAR_SOFT_RESET_REGS_RST		BIT(4)
+#define IAR_SOFT_RESET_PLL_RST		BIT(3)
+#define IAR_SOFT_RESET_TX_RST		BIT(2)
+#define IAR_SOFT_RESET_RX_RST		BIT(1)
+#define IAR_SOFT_RESET_SEQ_MGR_RST	BIT(0)
+
+/* SEQ_MGR_CTRL bits */
+#define IAR_SEQ_MGR_CTRL_SEQ_STATE_CTRL		(3)
+#define IAR_SEQ_MGR_CTRL_SEQ_STATE_CTRL_SHIFT	(6)
+#define IAR_SEQ_MGR_CTRL_NO_RX_RECYCLE		BIT(5)
+#define IAR_SEQ_MGR_CTRL_LATCH_PREAMBLE		BIT(4)
+#define IAR_SEQ_MGR_CTRL_EVENT_TMR_DO_NOT_LATCH	BIT(3)
+#define IAR_SEQ_MGR_CTRL_CLR_NEW_SEQ_INHIBIT	BIT(2)
+#define IAR_SEQ_MGR_CTRL_PSM_LOCK_DIS		BIT(1)
+#define IAR_SEQ_MGR_CTRL_PLL_ABORT_OVRD		BIT(0)
+
+/* SEQ_MGR_STS bits */
+#define IAR_SEQ_MGR_STS_TMR2_SEQ_TRIG_ARMED	BIT(7)
+#define IAR_SEQ_MGR_STS_RX_MODE			BIT(6)
+#define IAR_SEQ_MGR_STS_RX_TIMEOUT_PENDING	BIT(5)
+#define IAR_SEQ_MGR_STS_NEW_SEQ_INHIBIT		BIT(4)
+#define IAR_SEQ_MGR_STS_SEQ_IDLE		BIT(3)
+#define IAR_SEQ_MGR_STS_XCVSEQ_ACTUAL		(7)
+
+/* ABORT_STS bits */
+#define IAR_ABORT_STS_PLL_ABORTED	BIT(2)
+#define IAR_ABORT_STS_TC3_ABORTED	BIT(1)
+#define IAR_ABORT_STS_SW_ABORTED	BIT(0)
+
+/* IAR_FILTERFAIL_CODE2 bits */
+#define IAR_FILTERFAIL_CODE2_PAN_SEL	BIT(7)
+#define IAR_FILTERFAIL_CODE2_9_8	(3)
+
+/* PHY_STS bits */
+#define IAR_PHY_STS_PLL_UNLOCK		BIT(7)
+#define IAR_PHY_STS_PLL_LOCK_ERR	BIT(6)
+#define IAR_PHY_STS_PLL_LOCK		BIT(5)
+#define IAR_PHY_STS_CRCVALID		BIT(3)
+#define IAR_PHY_STS_FILTERFAIL_FLAG_SEL	BIT(2)
+#define IAR_PHY_STS_SFD_DET		BIT(1)
+#define IAR_PHY_STS_PREAMBLE_DET	BIT(0)
+
+/* TESTMODE_CTRL bits */
+#define IAR_TEST_MODE_CTRL_HOT_ANT		BIT(4)
+#define IAR_TEST_MODE_CTRL_IDEAL_RSSI_EN	BIT(3)
+#define IAR_TEST_MODE_CTRL_IDEAL_PFC_EN		BIT(2)
+#define IAR_TEST_MODE_CTRL_CONTINUOUS_EN	BIT(1)
+#define IAR_TEST_MODE_CTRL_FPGA_EN		BIT(0)
+
+/* DTM_CTRL1 bits */
+#define IAR_DTM_CTRL1_ATM_LOCKED	BIT(7)
+#define IAR_DTM_CTRL1_DTM_EN		BIT(6)
+#define IAR_DTM_CTRL1_PAGE5		BIT(5)
+#define IAR_DTM_CTRL1_PAGE4		BIT(4)
+#define IAR_DTM_CTRL1_PAGE3		BIT(3)
+#define IAR_DTM_CTRL1_PAGE2		BIT(2)
+#define IAR_DTM_CTRL1_PAGE1		BIT(1)
+#define IAR_DTM_CTRL1_PAGE0		BIT(0)
+
+/* TX_MODE_CTRL */
+#define IAR_TX_MODE_CTRL_TX_INV		BIT(4)
+#define IAR_TX_MODE_CTRL_BT_EN		BIT(3)
+#define IAR_TX_MODE_CTRL_DTS2		BIT(2)
+#define IAR_TX_MODE_CTRL_DTS1		BIT(1)
+#define IAR_TX_MODE_CTRL_DTS0		BIT(0)
+
+#define TX_MODE_CTRL_DTS_MASK	(7)
+
+#endif /* _MCR20A_H */
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
new file mode 100644
index 000000000..ee4cfbf2c
--- /dev/null
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -0,0 +1,1401 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Microchip MRF24J40 802.15.4 Wireless-PAN Networking controller
+ *
+ * Copyright (C) 2012 Alan Ott <alan@signal11.us>
+ *                    Signal 11 Software
+ */
+
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/ieee802154.h>
+#include <linux/irq.h>
+#include <net/cfg802154.h>
+#include <net/mac802154.h>
+
+/* MRF24J40 Short Address Registers */
+#define REG_RXMCR	0x00  /* Receive MAC control */
+#define BIT_PROMI	BIT(0)
+#define BIT_ERRPKT	BIT(1)
+#define BIT_NOACKRSP	BIT(5)
+#define BIT_PANCOORD	BIT(3)
+
+#define REG_PANIDL	0x01  /* PAN ID (low) */
+#define REG_PANIDH	0x02  /* PAN ID (high) */
+#define REG_SADRL	0x03  /* Short address (low) */
+#define REG_SADRH	0x04  /* Short address (high) */
+#define REG_EADR0	0x05  /* Long address (low) (high is EADR7) */
+#define REG_EADR1	0x06
+#define REG_EADR2	0x07
+#define REG_EADR3	0x08
+#define REG_EADR4	0x09
+#define REG_EADR5	0x0A
+#define REG_EADR6	0x0B
+#define REG_EADR7	0x0C
+#define REG_RXFLUSH	0x0D
+#define REG_ORDER	0x10
+#define REG_TXMCR	0x11  /* Transmit MAC control */
+#define TXMCR_MIN_BE_SHIFT		3
+#define TXMCR_MIN_BE_MASK		0x18
+#define TXMCR_CSMA_RETRIES_SHIFT	0
+#define TXMCR_CSMA_RETRIES_MASK		0x07
+
+#define REG_ACKTMOUT	0x12
+#define REG_ESLOTG1	0x13
+#define REG_SYMTICKL	0x14
+#define REG_SYMTICKH	0x15
+#define REG_PACON0	0x16  /* Power Amplifier Control */
+#define REG_PACON1	0x17  /* Power Amplifier Control */
+#define REG_PACON2	0x18  /* Power Amplifier Control */
+#define REG_TXBCON0	0x1A
+#define REG_TXNCON	0x1B  /* Transmit Normal FIFO Control */
+#define BIT_TXNTRIG	BIT(0)
+#define BIT_TXNSECEN	BIT(1)
+#define BIT_TXNACKREQ	BIT(2)
+
+#define REG_TXG1CON	0x1C
+#define REG_TXG2CON	0x1D
+#define REG_ESLOTG23	0x1E
+#define REG_ESLOTG45	0x1F
+#define REG_ESLOTG67	0x20
+#define REG_TXPEND	0x21
+#define REG_WAKECON	0x22
+#define REG_FROMOFFSET	0x23
+#define REG_TXSTAT	0x24  /* TX MAC Status Register */
+#define REG_TXBCON1	0x25
+#define REG_GATECLK	0x26
+#define REG_TXTIME	0x27
+#define REG_HSYMTMRL	0x28
+#define REG_HSYMTMRH	0x29
+#define REG_SOFTRST	0x2A  /* Soft Reset */
+#define REG_SECCON0	0x2C
+#define REG_SECCON1	0x2D
+#define REG_TXSTBL	0x2E  /* TX Stabilization */
+#define REG_RXSR	0x30
+#define REG_INTSTAT	0x31  /* Interrupt Status */
+#define BIT_TXNIF	BIT(0)
+#define BIT_RXIF	BIT(3)
+#define BIT_SECIF	BIT(4)
+#define BIT_SECIGNORE	BIT(7)
+
+#define REG_INTCON	0x32  /* Interrupt Control */
+#define BIT_TXNIE	BIT(0)
+#define BIT_RXIE	BIT(3)
+#define BIT_SECIE	BIT(4)
+
+#define REG_GPIO	0x33  /* GPIO */
+#define REG_TRISGPIO	0x34  /* GPIO direction */
+#define REG_SLPACK	0x35
+#define REG_RFCTL	0x36  /* RF Control Mode Register */
+#define BIT_RFRST	BIT(2)
+
+#define REG_SECCR2	0x37
+#define REG_BBREG0	0x38
+#define REG_BBREG1	0x39  /* Baseband Registers */
+#define BIT_RXDECINV	BIT(2)
+
+#define REG_BBREG2	0x3A  /* */
+#define BBREG2_CCA_MODE_SHIFT	6
+#define BBREG2_CCA_MODE_MASK	0xc0
+
+#define REG_BBREG3	0x3B
+#define REG_BBREG4	0x3C
+#define REG_BBREG6	0x3E  /* */
+#define REG_CCAEDTH	0x3F  /* Energy Detection Threshold */
+
+/* MRF24J40 Long Address Registers */
+#define REG_RFCON0	0x200  /* RF Control Registers */
+#define RFCON0_CH_SHIFT	4
+#define RFCON0_CH_MASK	0xf0
+#define RFOPT_RECOMMEND	3
+
+#define REG_RFCON1	0x201
+#define REG_RFCON2	0x202
+#define REG_RFCON3	0x203
+
+#define TXPWRL_MASK	0xc0
+#define TXPWRL_SHIFT	6
+#define TXPWRL_30	0x3
+#define TXPWRL_20	0x2
+#define TXPWRL_10	0x1
+#define TXPWRL_0	0x0
+
+#define TXPWRS_MASK	0x38
+#define TXPWRS_SHIFT	3
+#define TXPWRS_6_3	0x7
+#define TXPWRS_4_9	0x6
+#define TXPWRS_3_7	0x5
+#define TXPWRS_2_8	0x4
+#define TXPWRS_1_9	0x3
+#define TXPWRS_1_2	0x2
+#define TXPWRS_0_5	0x1
+#define TXPWRS_0	0x0
+
+#define REG_RFCON5	0x205
+#define REG_RFCON6	0x206
+#define REG_RFCON7	0x207
+#define REG_RFCON8	0x208
+#define REG_SLPCAL0	0x209
+#define REG_SLPCAL1	0x20A
+#define REG_SLPCAL2	0x20B
+#define REG_RFSTATE	0x20F
+#define REG_RSSI	0x210
+#define REG_SLPCON0	0x211  /* Sleep Clock Control Registers */
+#define BIT_INTEDGE	BIT(1)
+
+#define REG_SLPCON1	0x220
+#define REG_WAKETIMEL	0x222  /* Wake-up Time Match Value Low */
+#define REG_WAKETIMEH	0x223  /* Wake-up Time Match Value High */
+#define REG_REMCNTL	0x224
+#define REG_REMCNTH	0x225
+#define REG_MAINCNT0	0x226
+#define REG_MAINCNT1	0x227
+#define REG_MAINCNT2	0x228
+#define REG_MAINCNT3	0x229
+#define REG_TESTMODE	0x22F  /* Test mode */
+#define REG_ASSOEAR0	0x230
+#define REG_ASSOEAR1	0x231
+#define REG_ASSOEAR2	0x232
+#define REG_ASSOEAR3	0x233
+#define REG_ASSOEAR4	0x234
+#define REG_ASSOEAR5	0x235
+#define REG_ASSOEAR6	0x236
+#define REG_ASSOEAR7	0x237
+#define REG_ASSOSAR0	0x238
+#define REG_ASSOSAR1	0x239
+#define REG_UNONCE0	0x240
+#define REG_UNONCE1	0x241
+#define REG_UNONCE2	0x242
+#define REG_UNONCE3	0x243
+#define REG_UNONCE4	0x244
+#define REG_UNONCE5	0x245
+#define REG_UNONCE6	0x246
+#define REG_UNONCE7	0x247
+#define REG_UNONCE8	0x248
+#define REG_UNONCE9	0x249
+#define REG_UNONCE10	0x24A
+#define REG_UNONCE11	0x24B
+#define REG_UNONCE12	0x24C
+#define REG_RX_FIFO	0x300  /* Receive FIFO */
+
+/* Device configuration: Only channels 11-26 on page 0 are supported. */
+#define MRF24J40_CHAN_MIN 11
+#define MRF24J40_CHAN_MAX 26
+#define CHANNEL_MASK (((u32)1 << (MRF24J40_CHAN_MAX + 1)) \
+		      - ((u32)1 << MRF24J40_CHAN_MIN))
+
+#define TX_FIFO_SIZE 128 /* From datasheet */
+#define RX_FIFO_SIZE 144 /* From datasheet */
+#define SET_CHANNEL_DELAY_US 192 /* From datasheet */
+
+enum mrf24j40_modules { MRF24J40, MRF24J40MA, MRF24J40MC };
+
+/* Device Private Data */
+struct mrf24j40 {
+	struct spi_device *spi;
+	struct ieee802154_hw *hw;
+
+	struct regmap *regmap_short;
+	struct regmap *regmap_long;
+
+	/* for writing txfifo */
+	struct spi_message tx_msg;
+	u8 tx_hdr_buf[2];
+	struct spi_transfer tx_hdr_trx;
+	u8 tx_len_buf[2];
+	struct spi_transfer tx_len_trx;
+	struct spi_transfer tx_buf_trx;
+	struct sk_buff *tx_skb;
+
+	/* post transmit message to send frame out  */
+	struct spi_message tx_post_msg;
+	u8 tx_post_buf[2];
+	struct spi_transfer tx_post_trx;
+
+	/* for protect/unprotect/read length rxfifo */
+	struct spi_message rx_msg;
+	u8 rx_buf[3];
+	struct spi_transfer rx_trx;
+
+	/* receive handling */
+	struct spi_message rx_buf_msg;
+	u8 rx_addr_buf[2];
+	struct spi_transfer rx_addr_trx;
+	u8 rx_lqi_buf[2];
+	struct spi_transfer rx_lqi_trx;
+	u8 rx_fifo_buf[RX_FIFO_SIZE];
+	struct spi_transfer rx_fifo_buf_trx;
+
+	/* isr handling for reading intstat */
+	struct spi_message irq_msg;
+	u8 irq_buf[2];
+	struct spi_transfer irq_trx;
+};
+
+/* regmap information for short address register access */
+#define MRF24J40_SHORT_WRITE	0x01
+#define MRF24J40_SHORT_READ	0x00
+#define MRF24J40_SHORT_NUMREGS	0x3F
+
+/* regmap information for long address register access */
+#define MRF24J40_LONG_ACCESS	0x80
+#define MRF24J40_LONG_NUMREGS	0x38F
+
+/* Read/Write SPI Commands for Short and Long Address registers. */
+#define MRF24J40_READSHORT(reg) ((reg) << 1)
+#define MRF24J40_WRITESHORT(reg) ((reg) << 1 | 1)
+#define MRF24J40_READLONG(reg) (1 << 15 | (reg) << 5)
+#define MRF24J40_WRITELONG(reg) (1 << 15 | (reg) << 5 | 1 << 4)
+
+/* The datasheet indicates the theoretical maximum for SCK to be 10MHz */
+#define MAX_SPI_SPEED_HZ 10000000
+
+#define printdev(X) (&X->spi->dev)
+
+static bool
+mrf24j40_short_reg_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case REG_RXMCR:
+	case REG_PANIDL:
+	case REG_PANIDH:
+	case REG_SADRL:
+	case REG_SADRH:
+	case REG_EADR0:
+	case REG_EADR1:
+	case REG_EADR2:
+	case REG_EADR3:
+	case REG_EADR4:
+	case REG_EADR5:
+	case REG_EADR6:
+	case REG_EADR7:
+	case REG_RXFLUSH:
+	case REG_ORDER:
+	case REG_TXMCR:
+	case REG_ACKTMOUT:
+	case REG_ESLOTG1:
+	case REG_SYMTICKL:
+	case REG_SYMTICKH:
+	case REG_PACON0:
+	case REG_PACON1:
+	case REG_PACON2:
+	case REG_TXBCON0:
+	case REG_TXNCON:
+	case REG_TXG1CON:
+	case REG_TXG2CON:
+	case REG_ESLOTG23:
+	case REG_ESLOTG45:
+	case REG_ESLOTG67:
+	case REG_TXPEND:
+	case REG_WAKECON:
+	case REG_FROMOFFSET:
+	case REG_TXBCON1:
+	case REG_GATECLK:
+	case REG_TXTIME:
+	case REG_HSYMTMRL:
+	case REG_HSYMTMRH:
+	case REG_SOFTRST:
+	case REG_SECCON0:
+	case REG_SECCON1:
+	case REG_TXSTBL:
+	case REG_RXSR:
+	case REG_INTCON:
+	case REG_TRISGPIO:
+	case REG_GPIO:
+	case REG_RFCTL:
+	case REG_SECCR2:
+	case REG_SLPACK:
+	case REG_BBREG0:
+	case REG_BBREG1:
+	case REG_BBREG2:
+	case REG_BBREG3:
+	case REG_BBREG4:
+	case REG_BBREG6:
+	case REG_CCAEDTH:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mrf24j40_short_reg_readable(struct device *dev, unsigned int reg)
+{
+	bool rc;
+
+	/* all writeable are also readable */
+	rc = mrf24j40_short_reg_writeable(dev, reg);
+	if (rc)
+		return rc;
+
+	/* readonly regs */
+	switch (reg) {
+	case REG_TXSTAT:
+	case REG_INTSTAT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mrf24j40_short_reg_volatile(struct device *dev, unsigned int reg)
+{
+	/* can be changed during runtime */
+	switch (reg) {
+	case REG_TXSTAT:
+	case REG_INTSTAT:
+	case REG_RXFLUSH:
+	case REG_TXNCON:
+	case REG_SOFTRST:
+	case REG_RFCTL:
+	case REG_TXBCON0:
+	case REG_TXG1CON:
+	case REG_TXG2CON:
+	case REG_TXBCON1:
+	case REG_SECCON0:
+	case REG_RXSR:
+	case REG_SLPACK:
+	case REG_SECCR2:
+	case REG_BBREG6:
+	/* use them in spi_async and regmap so it's volatile */
+	case REG_BBREG1:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mrf24j40_short_reg_precious(struct device *dev, unsigned int reg)
+{
+	/* don't clear irq line on read */
+	switch (reg) {
+	case REG_INTSTAT:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config mrf24j40_short_regmap = {
+	.name = "mrf24j40_short",
+	.reg_bits = 7,
+	.val_bits = 8,
+	.pad_bits = 1,
+	.write_flag_mask = MRF24J40_SHORT_WRITE,
+	.read_flag_mask = MRF24J40_SHORT_READ,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = MRF24J40_SHORT_NUMREGS,
+	.writeable_reg = mrf24j40_short_reg_writeable,
+	.readable_reg = mrf24j40_short_reg_readable,
+	.volatile_reg = mrf24j40_short_reg_volatile,
+	.precious_reg = mrf24j40_short_reg_precious,
+};
+
+static bool
+mrf24j40_long_reg_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case REG_RFCON0:
+	case REG_RFCON1:
+	case REG_RFCON2:
+	case REG_RFCON3:
+	case REG_RFCON5:
+	case REG_RFCON6:
+	case REG_RFCON7:
+	case REG_RFCON8:
+	case REG_SLPCAL2:
+	case REG_SLPCON0:
+	case REG_SLPCON1:
+	case REG_WAKETIMEL:
+	case REG_WAKETIMEH:
+	case REG_REMCNTL:
+	case REG_REMCNTH:
+	case REG_MAINCNT0:
+	case REG_MAINCNT1:
+	case REG_MAINCNT2:
+	case REG_MAINCNT3:
+	case REG_TESTMODE:
+	case REG_ASSOEAR0:
+	case REG_ASSOEAR1:
+	case REG_ASSOEAR2:
+	case REG_ASSOEAR3:
+	case REG_ASSOEAR4:
+	case REG_ASSOEAR5:
+	case REG_ASSOEAR6:
+	case REG_ASSOEAR7:
+	case REG_ASSOSAR0:
+	case REG_ASSOSAR1:
+	case REG_UNONCE0:
+	case REG_UNONCE1:
+	case REG_UNONCE2:
+	case REG_UNONCE3:
+	case REG_UNONCE4:
+	case REG_UNONCE5:
+	case REG_UNONCE6:
+	case REG_UNONCE7:
+	case REG_UNONCE8:
+	case REG_UNONCE9:
+	case REG_UNONCE10:
+	case REG_UNONCE11:
+	case REG_UNONCE12:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mrf24j40_long_reg_readable(struct device *dev, unsigned int reg)
+{
+	bool rc;
+
+	/* all writeable are also readable */
+	rc = mrf24j40_long_reg_writeable(dev, reg);
+	if (rc)
+		return rc;
+
+	/* readonly regs */
+	switch (reg) {
+	case REG_SLPCAL0:
+	case REG_SLPCAL1:
+	case REG_RFSTATE:
+	case REG_RSSI:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool
+mrf24j40_long_reg_volatile(struct device *dev, unsigned int reg)
+{
+	/* can be changed during runtime */
+	switch (reg) {
+	case REG_SLPCAL0:
+	case REG_SLPCAL1:
+	case REG_SLPCAL2:
+	case REG_RFSTATE:
+	case REG_RSSI:
+	case REG_MAINCNT3:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config mrf24j40_long_regmap = {
+	.name = "mrf24j40_long",
+	.reg_bits = 11,
+	.val_bits = 8,
+	.pad_bits = 5,
+	.write_flag_mask = MRF24J40_LONG_ACCESS,
+	.read_flag_mask = MRF24J40_LONG_ACCESS,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = MRF24J40_LONG_NUMREGS,
+	.writeable_reg = mrf24j40_long_reg_writeable,
+	.readable_reg = mrf24j40_long_reg_readable,
+	.volatile_reg = mrf24j40_long_reg_volatile,
+};
+
+static int mrf24j40_long_regmap_write(void *context, const void *data,
+				      size_t count)
+{
+	struct spi_device *spi = context;
+	u8 buf[3];
+
+	if (count > 3)
+		return -EINVAL;
+
+	/* regmap supports read/write mask only in frist byte
+	 * long write access need to set the 12th bit, so we
+	 * make special handling for write.
+	 */
+	memcpy(buf, data, count);
+	buf[1] |= (1 << 4);
+
+	return spi_write(spi, buf, count);
+}
+
+static int
+mrf24j40_long_regmap_read(void *context, const void *reg, size_t reg_size,
+			  void *val, size_t val_size)
+{
+	struct spi_device *spi = context;
+
+	return spi_write_then_read(spi, reg, reg_size, val, val_size);
+}
+
+static const struct regmap_bus mrf24j40_long_regmap_bus = {
+	.write = mrf24j40_long_regmap_write,
+	.read = mrf24j40_long_regmap_read,
+	.reg_format_endian_default = REGMAP_ENDIAN_BIG,
+	.val_format_endian_default = REGMAP_ENDIAN_BIG,
+};
+
+static void write_tx_buf_complete(void *context)
+{
+	struct mrf24j40 *devrec = context;
+	__le16 fc = ieee802154_get_fc_from_skb(devrec->tx_skb);
+	u8 val = BIT_TXNTRIG;
+	int ret;
+
+	if (ieee802154_is_secen(fc))
+		val |= BIT_TXNSECEN;
+
+	if (ieee802154_is_ackreq(fc))
+		val |= BIT_TXNACKREQ;
+
+	devrec->tx_post_msg.complete = NULL;
+	devrec->tx_post_buf[0] = MRF24J40_WRITESHORT(REG_TXNCON);
+	devrec->tx_post_buf[1] = val;
+
+	ret = spi_async(devrec->spi, &devrec->tx_post_msg);
+	if (ret)
+		dev_err(printdev(devrec), "SPI write Failed for transmit buf\n");
+}
+
+/* This function relies on an undocumented write method. Once a write command
+   and address is set, as many bytes of data as desired can be clocked into
+   the device. The datasheet only shows setting one byte at a time. */
+static int write_tx_buf(struct mrf24j40 *devrec, u16 reg,
+			const u8 *data, size_t length)
+{
+	u16 cmd;
+	int ret;
+
+	/* Range check the length. 2 bytes are used for the length fields.*/
+	if (length > TX_FIFO_SIZE-2) {
+		dev_err(printdev(devrec), "write_tx_buf() was passed too large a buffer. Performing short write.\n");
+		length = TX_FIFO_SIZE-2;
+	}
+
+	cmd = MRF24J40_WRITELONG(reg);
+	devrec->tx_hdr_buf[0] = cmd >> 8 & 0xff;
+	devrec->tx_hdr_buf[1] = cmd & 0xff;
+	devrec->tx_len_buf[0] = 0x0; /* Header Length. Set to 0 for now. TODO */
+	devrec->tx_len_buf[1] = length; /* Total length */
+	devrec->tx_buf_trx.tx_buf = data;
+	devrec->tx_buf_trx.len = length;
+
+	ret = spi_async(devrec->spi, &devrec->tx_msg);
+	if (ret)
+		dev_err(printdev(devrec), "SPI write Failed for TX buf\n");
+
+	return ret;
+}
+
+static int mrf24j40_tx(struct ieee802154_hw *hw, struct sk_buff *skb)
+{
+	struct mrf24j40 *devrec = hw->priv;
+
+	dev_dbg(printdev(devrec), "tx packet of %d bytes\n", skb->len);
+	devrec->tx_skb = skb;
+
+	return write_tx_buf(devrec, 0x000, skb->data, skb->len);
+}
+
+static int mrf24j40_ed(struct ieee802154_hw *hw, u8 *level)
+{
+	/* TODO: */
+	pr_warn("mrf24j40: ed not implemented\n");
+	*level = 0;
+	return 0;
+}
+
+static int mrf24j40_start(struct ieee802154_hw *hw)
+{
+	struct mrf24j40 *devrec = hw->priv;
+
+	dev_dbg(printdev(devrec), "start\n");
+
+	/* Clear TXNIE and RXIE. Enable interrupts */
+	return regmap_update_bits(devrec->regmap_short, REG_INTCON,
+				  BIT_TXNIE | BIT_RXIE | BIT_SECIE, 0);
+}
+
+static void mrf24j40_stop(struct ieee802154_hw *hw)
+{
+	struct mrf24j40 *devrec = hw->priv;
+
+	dev_dbg(printdev(devrec), "stop\n");
+
+	/* Set TXNIE and RXIE. Disable Interrupts */
+	regmap_update_bits(devrec->regmap_short, REG_INTCON,
+			   BIT_TXNIE | BIT_RXIE, BIT_TXNIE | BIT_RXIE);
+}
+
+static int mrf24j40_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	u8 val;
+	int ret;
+
+	dev_dbg(printdev(devrec), "Set Channel %d\n", channel);
+
+	WARN_ON(page != 0);
+	WARN_ON(channel < MRF24J40_CHAN_MIN);
+	WARN_ON(channel > MRF24J40_CHAN_MAX);
+
+	/* Set Channel TODO */
+	val = (channel - 11) << RFCON0_CH_SHIFT | RFOPT_RECOMMEND;
+	ret = regmap_update_bits(devrec->regmap_long, REG_RFCON0,
+				 RFCON0_CH_MASK, val);
+	if (ret)
+		return ret;
+
+	/* RF Reset */
+	ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST,
+				 BIT_RFRST);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(devrec->regmap_short, REG_RFCTL, BIT_RFRST, 0);
+	if (!ret)
+		udelay(SET_CHANNEL_DELAY_US); /* per datasheet */
+
+	return ret;
+}
+
+static int mrf24j40_filter(struct ieee802154_hw *hw,
+			   struct ieee802154_hw_addr_filt *filt,
+			   unsigned long changed)
+{
+	struct mrf24j40 *devrec = hw->priv;
+
+	dev_dbg(printdev(devrec), "filter\n");
+
+	if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
+		/* Short Addr */
+		u8 addrh, addrl;
+
+		addrh = le16_to_cpu(filt->short_addr) >> 8 & 0xff;
+		addrl = le16_to_cpu(filt->short_addr) & 0xff;
+
+		regmap_write(devrec->regmap_short, REG_SADRH, addrh);
+		regmap_write(devrec->regmap_short, REG_SADRL, addrl);
+		dev_dbg(printdev(devrec),
+			"Set short addr to %04hx\n", filt->short_addr);
+	}
+
+	if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
+		/* Device Address */
+		u8 i, addr[8];
+
+		memcpy(addr, &filt->ieee_addr, 8);
+		for (i = 0; i < 8; i++)
+			regmap_write(devrec->regmap_short, REG_EADR0 + i,
+				     addr[i]);
+
+#ifdef DEBUG
+		pr_debug("Set long addr to: ");
+		for (i = 0; i < 8; i++)
+			pr_debug("%02hhx ", addr[7 - i]);
+		pr_debug("\n");
+#endif
+	}
+
+	if (changed & IEEE802154_AFILT_PANID_CHANGED) {
+		/* PAN ID */
+		u8 panidl, panidh;
+
+		panidh = le16_to_cpu(filt->pan_id) >> 8 & 0xff;
+		panidl = le16_to_cpu(filt->pan_id) & 0xff;
+		regmap_write(devrec->regmap_short, REG_PANIDH, panidh);
+		regmap_write(devrec->regmap_short, REG_PANIDL, panidl);
+
+		dev_dbg(printdev(devrec), "Set PANID to %04hx\n", filt->pan_id);
+	}
+
+	if (changed & IEEE802154_AFILT_PANC_CHANGED) {
+		/* Pan Coordinator */
+		u8 val;
+		int ret;
+
+		if (filt->pan_coord)
+			val = BIT_PANCOORD;
+		else
+			val = 0;
+		ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR,
+					 BIT_PANCOORD, val);
+		if (ret)
+			return ret;
+
+		/* REG_SLOTTED is maintained as default (unslotted/CSMA-CA).
+		 * REG_ORDER is maintained as default (no beacon/superframe).
+		 */
+
+		dev_dbg(printdev(devrec), "Set Pan Coord to %s\n",
+			filt->pan_coord ? "on" : "off");
+	}
+
+	return 0;
+}
+
+static void mrf24j40_handle_rx_read_buf_unlock(struct mrf24j40 *devrec)
+{
+	int ret;
+
+	/* Turn back on reception of packets off the air. */
+	devrec->rx_msg.complete = NULL;
+	devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1);
+	devrec->rx_buf[1] = 0x00; /* CLR RXDECINV */
+	ret = spi_async(devrec->spi, &devrec->rx_msg);
+	if (ret)
+		dev_err(printdev(devrec), "failed to unlock rx buffer\n");
+}
+
+static void mrf24j40_handle_rx_read_buf_complete(void *context)
+{
+	struct mrf24j40 *devrec = context;
+	u8 len = devrec->rx_buf[2];
+	u8 rx_local_buf[RX_FIFO_SIZE];
+	struct sk_buff *skb;
+
+	memcpy(rx_local_buf, devrec->rx_fifo_buf, len);
+	mrf24j40_handle_rx_read_buf_unlock(devrec);
+
+	skb = dev_alloc_skb(IEEE802154_MTU);
+	if (!skb) {
+		dev_err(printdev(devrec), "failed to allocate skb\n");
+		return;
+	}
+
+	skb_put_data(skb, rx_local_buf, len);
+	ieee802154_rx_irqsafe(devrec->hw, skb, 0);
+
+#ifdef DEBUG
+	 print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ", DUMP_PREFIX_OFFSET, 16, 1,
+			rx_local_buf, len, 0);
+	 pr_debug("mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n",
+		  devrec->rx_lqi_buf[0], devrec->rx_lqi_buf[1]);
+#endif
+}
+
+static void mrf24j40_handle_rx_read_buf(void *context)
+{
+	struct mrf24j40 *devrec = context;
+	u16 cmd;
+	int ret;
+
+	/* if length is invalid read the full MTU */
+	if (!ieee802154_is_valid_psdu_len(devrec->rx_buf[2]))
+		devrec->rx_buf[2] = IEEE802154_MTU;
+
+	cmd = MRF24J40_READLONG(REG_RX_FIFO + 1);
+	devrec->rx_addr_buf[0] = cmd >> 8 & 0xff;
+	devrec->rx_addr_buf[1] = cmd & 0xff;
+	devrec->rx_fifo_buf_trx.len = devrec->rx_buf[2];
+	ret = spi_async(devrec->spi, &devrec->rx_buf_msg);
+	if (ret) {
+		dev_err(printdev(devrec), "failed to read rx buffer\n");
+		mrf24j40_handle_rx_read_buf_unlock(devrec);
+	}
+}
+
+static void mrf24j40_handle_rx_read_len(void *context)
+{
+	struct mrf24j40 *devrec = context;
+	u16 cmd;
+	int ret;
+
+	/* read the length of received frame */
+	devrec->rx_msg.complete = mrf24j40_handle_rx_read_buf;
+	devrec->rx_trx.len = 3;
+	cmd = MRF24J40_READLONG(REG_RX_FIFO);
+	devrec->rx_buf[0] = cmd >> 8 & 0xff;
+	devrec->rx_buf[1] = cmd & 0xff;
+
+	ret = spi_async(devrec->spi, &devrec->rx_msg);
+	if (ret) {
+		dev_err(printdev(devrec), "failed to read rx buffer length\n");
+		mrf24j40_handle_rx_read_buf_unlock(devrec);
+	}
+}
+
+static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
+{
+	/* Turn off reception of packets off the air. This prevents the
+	 * device from overwriting the buffer while we're reading it.
+	 */
+	devrec->rx_msg.complete = mrf24j40_handle_rx_read_len;
+	devrec->rx_trx.len = 2;
+	devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1);
+	devrec->rx_buf[1] = BIT_RXDECINV; /* SET RXDECINV */
+
+	return spi_async(devrec->spi, &devrec->rx_msg);
+}
+
+static int
+mrf24j40_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be,
+		     u8 retries)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	u8 val;
+
+	/* min_be */
+	val = min_be << TXMCR_MIN_BE_SHIFT;
+	/* csma backoffs */
+	val |= retries << TXMCR_CSMA_RETRIES_SHIFT;
+
+	return regmap_update_bits(devrec->regmap_short, REG_TXMCR,
+				  TXMCR_MIN_BE_MASK | TXMCR_CSMA_RETRIES_MASK,
+				  val);
+}
+
+static int mrf24j40_set_cca_mode(struct ieee802154_hw *hw,
+				 const struct wpan_phy_cca *cca)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	u8 val;
+
+	/* mapping 802.15.4 to driver spec */
+	switch (cca->mode) {
+	case NL802154_CCA_ENERGY:
+		val = 2;
+		break;
+	case NL802154_CCA_CARRIER:
+		val = 1;
+		break;
+	case NL802154_CCA_ENERGY_CARRIER:
+		switch (cca->opt) {
+		case NL802154_CCA_OPT_ENERGY_CARRIER_AND:
+			val = 3;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(devrec->regmap_short, REG_BBREG2,
+				  BBREG2_CCA_MODE_MASK,
+				  val << BBREG2_CCA_MODE_SHIFT);
+}
+
+/* array for representing ed levels */
+static const s32 mrf24j40_ed_levels[] = {
+	-9000, -8900, -8800, -8700, -8600, -8500, -8400, -8300, -8200, -8100,
+	-8000, -7900, -7800, -7700, -7600, -7500, -7400, -7300, -7200, -7100,
+	-7000, -6900, -6800, -6700, -6600, -6500, -6400, -6300, -6200, -6100,
+	-6000, -5900, -5800, -5700, -5600, -5500, -5400, -5300, -5200, -5100,
+	-5000, -4900, -4800, -4700, -4600, -4500, -4400, -4300, -4200, -4100,
+	-4000, -3900, -3800, -3700, -3600, -3500
+};
+
+/* map ed levels to register value */
+static const s32 mrf24j40_ed_levels_map[][2] = {
+	{ -9000, 0 }, { -8900, 1 }, { -8800, 2 }, { -8700, 5 }, { -8600, 9 },
+	{ -8500, 13 }, { -8400, 18 }, { -8300, 23 }, { -8200, 27 },
+	{ -8100, 32 }, { -8000, 37 }, { -7900, 43 }, { -7800, 48 },
+	{ -7700, 53 }, { -7600, 58 }, { -7500, 63 }, { -7400, 68 },
+	{ -7300, 73 }, { -7200, 78 }, { -7100, 83 }, { -7000, 89 },
+	{ -6900, 95 }, { -6800, 100 }, { -6700, 107 }, { -6600, 111 },
+	{ -6500, 117 }, { -6400, 121 }, { -6300, 125 }, { -6200, 129 },
+	{ -6100, 133 },	{ -6000, 138 }, { -5900, 143 }, { -5800, 148 },
+	{ -5700, 153 }, { -5600, 159 },	{ -5500, 165 }, { -5400, 170 },
+	{ -5300, 176 }, { -5200, 183 }, { -5100, 188 }, { -5000, 193 },
+	{ -4900, 198 }, { -4800, 203 }, { -4700, 207 }, { -4600, 212 },
+	{ -4500, 216 }, { -4400, 221 }, { -4300, 225 }, { -4200, 228 },
+	{ -4100, 233 }, { -4000, 239 }, { -3900, 245 }, { -3800, 250 },
+	{ -3700, 253 }, { -3600, 254 }, { -3500, 255 },
+};
+
+static int mrf24j40_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mrf24j40_ed_levels_map); i++) {
+		if (mrf24j40_ed_levels_map[i][0] == mbm)
+			return regmap_write(devrec->regmap_short, REG_CCAEDTH,
+					    mrf24j40_ed_levels_map[i][1]);
+	}
+
+	return -EINVAL;
+}
+
+static const s32 mrf24j40ma_powers[] = {
+	0, -50, -120, -190, -280, -370, -490, -630, -1000, -1050, -1120, -1190,
+	-1280, -1370, -1490, -1630, -2000, -2050, -2120, -2190, -2280, -2370,
+	-2490, -2630, -3000, -3050, -3120, -3190, -3280, -3370, -3490, -3630,
+};
+
+static int mrf24j40_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	s32 small_scale;
+	u8 val;
+
+	if (0 >= mbm && mbm > -1000) {
+		val = TXPWRL_0 << TXPWRL_SHIFT;
+		small_scale = mbm;
+	} else if (-1000 >= mbm && mbm > -2000) {
+		val = TXPWRL_10 << TXPWRL_SHIFT;
+		small_scale = mbm + 1000;
+	} else if (-2000 >= mbm && mbm > -3000) {
+		val = TXPWRL_20 << TXPWRL_SHIFT;
+		small_scale = mbm + 2000;
+	} else if (-3000 >= mbm && mbm > -4000) {
+		val = TXPWRL_30 << TXPWRL_SHIFT;
+		small_scale = mbm + 3000;
+	} else {
+		return -EINVAL;
+	}
+
+	switch (small_scale) {
+	case 0:
+		val |= (TXPWRS_0 << TXPWRS_SHIFT);
+		break;
+	case -50:
+		val |= (TXPWRS_0_5 << TXPWRS_SHIFT);
+		break;
+	case -120:
+		val |= (TXPWRS_1_2 << TXPWRS_SHIFT);
+		break;
+	case -190:
+		val |= (TXPWRS_1_9 << TXPWRS_SHIFT);
+		break;
+	case -280:
+		val |= (TXPWRS_2_8 << TXPWRS_SHIFT);
+		break;
+	case -370:
+		val |= (TXPWRS_3_7 << TXPWRS_SHIFT);
+		break;
+	case -490:
+		val |= (TXPWRS_4_9 << TXPWRS_SHIFT);
+		break;
+	case -630:
+		val |= (TXPWRS_6_3 << TXPWRS_SHIFT);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(devrec->regmap_long, REG_RFCON3,
+				  TXPWRL_MASK | TXPWRS_MASK, val);
+}
+
+static int mrf24j40_set_promiscuous_mode(struct ieee802154_hw *hw, bool on)
+{
+	struct mrf24j40 *devrec = hw->priv;
+	int ret;
+
+	if (on) {
+		/* set PROMI, ERRPKT and NOACKRSP */
+		ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR,
+					 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP,
+					 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP);
+	} else {
+		/* clear PROMI, ERRPKT and NOACKRSP */
+		ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR,
+					 BIT_PROMI | BIT_ERRPKT | BIT_NOACKRSP,
+					 0);
+	}
+
+	return ret;
+}
+
+static const struct ieee802154_ops mrf24j40_ops = {
+	.owner = THIS_MODULE,
+	.xmit_async = mrf24j40_tx,
+	.ed = mrf24j40_ed,
+	.start = mrf24j40_start,
+	.stop = mrf24j40_stop,
+	.set_channel = mrf24j40_set_channel,
+	.set_hw_addr_filt = mrf24j40_filter,
+	.set_csma_params = mrf24j40_csma_params,
+	.set_cca_mode = mrf24j40_set_cca_mode,
+	.set_cca_ed_level = mrf24j40_set_cca_ed_level,
+	.set_txpower = mrf24j40_set_txpower,
+	.set_promiscuous_mode = mrf24j40_set_promiscuous_mode,
+};
+
+static void mrf24j40_intstat_complete(void *context)
+{
+	struct mrf24j40 *devrec = context;
+	u8 intstat = devrec->irq_buf[1];
+
+	enable_irq(devrec->spi->irq);
+
+	/* Ignore Rx security decryption */
+	if (intstat & BIT_SECIF)
+		regmap_write_async(devrec->regmap_short, REG_SECCON0,
+				   BIT_SECIGNORE);
+
+	/* Check for TX complete */
+	if (intstat & BIT_TXNIF)
+		ieee802154_xmit_complete(devrec->hw, devrec->tx_skb, false);
+
+	/* Check for Rx */
+	if (intstat & BIT_RXIF)
+		mrf24j40_handle_rx(devrec);
+}
+
+static irqreturn_t mrf24j40_isr(int irq, void *data)
+{
+	struct mrf24j40 *devrec = data;
+	int ret;
+
+	disable_irq_nosync(irq);
+
+	devrec->irq_buf[0] = MRF24J40_READSHORT(REG_INTSTAT);
+	devrec->irq_buf[1] = 0;
+
+	/* Read the interrupt status */
+	ret = spi_async(devrec->spi, &devrec->irq_msg);
+	if (ret) {
+		enable_irq(irq);
+		return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int mrf24j40_hw_init(struct mrf24j40 *devrec)
+{
+	u32 irq_type;
+	int ret;
+
+	/* Initialize the device.
+		From datasheet section 3.2: Initialization. */
+	ret = regmap_write(devrec->regmap_short, REG_SOFTRST, 0x07);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_short, REG_PACON2, 0x98);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_short, REG_TXSTBL, 0x95);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_long, REG_RFCON0, 0x03);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_long, REG_RFCON1, 0x01);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_long, REG_RFCON2, 0x80);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_long, REG_RFCON6, 0x90);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_long, REG_RFCON7, 0x80);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_long, REG_RFCON8, 0x10);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_long, REG_SLPCON1, 0x21);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_short, REG_BBREG2, 0x80);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_short, REG_CCAEDTH, 0x60);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_short, REG_BBREG6, 0x40);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x04);
+	if (ret)
+		goto err_ret;
+
+	ret = regmap_write(devrec->regmap_short, REG_RFCTL, 0x0);
+	if (ret)
+		goto err_ret;
+
+	udelay(192);
+
+	/* Set RX Mode. RXMCR<1:0>: 0x0 normal, 0x1 promisc, 0x2 error */
+	ret = regmap_update_bits(devrec->regmap_short, REG_RXMCR, 0x03, 0x00);
+	if (ret)
+		goto err_ret;
+
+	if (spi_get_device_id(devrec->spi)->driver_data == MRF24J40MC) {
+		/* Enable external amplifier.
+		 * From MRF24J40MC datasheet section 1.3: Operation.
+		 */
+		regmap_update_bits(devrec->regmap_long, REG_TESTMODE, 0x07,
+				   0x07);
+
+		/* Set GPIO3 as output. */
+		regmap_update_bits(devrec->regmap_short, REG_TRISGPIO, 0x08,
+				   0x08);
+
+		/* Set GPIO3 HIGH to enable U5 voltage regulator */
+		regmap_update_bits(devrec->regmap_short, REG_GPIO, 0x08, 0x08);
+
+		/* Reduce TX pwr to meet FCC requirements.
+		 * From MRF24J40MC datasheet section 3.1.1
+		 */
+		regmap_write(devrec->regmap_long, REG_RFCON3, 0x28);
+	}
+
+	irq_type = irq_get_trigger_type(devrec->spi->irq);
+	if (irq_type == IRQ_TYPE_EDGE_RISING ||
+	    irq_type == IRQ_TYPE_EDGE_FALLING)
+		dev_warn(&devrec->spi->dev,
+			 "Using edge triggered irq's are not recommended, because it can cause races and result in a non-functional driver!\n");
+	switch (irq_type) {
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_LEVEL_HIGH:
+		/* set interrupt polarity to rising */
+		ret = regmap_update_bits(devrec->regmap_long, REG_SLPCON0,
+					 BIT_INTEDGE, BIT_INTEDGE);
+		if (ret)
+			goto err_ret;
+		break;
+	default:
+		/* default is falling edge */
+		break;
+	}
+
+	return 0;
+
+err_ret:
+	return ret;
+}
+
+static void
+mrf24j40_setup_tx_spi_messages(struct mrf24j40 *devrec)
+{
+	spi_message_init(&devrec->tx_msg);
+	devrec->tx_msg.context = devrec;
+	devrec->tx_msg.complete = write_tx_buf_complete;
+	devrec->tx_hdr_trx.len = 2;
+	devrec->tx_hdr_trx.tx_buf = devrec->tx_hdr_buf;
+	spi_message_add_tail(&devrec->tx_hdr_trx, &devrec->tx_msg);
+	devrec->tx_len_trx.len = 2;
+	devrec->tx_len_trx.tx_buf = devrec->tx_len_buf;
+	spi_message_add_tail(&devrec->tx_len_trx, &devrec->tx_msg);
+	spi_message_add_tail(&devrec->tx_buf_trx, &devrec->tx_msg);
+
+	spi_message_init(&devrec->tx_post_msg);
+	devrec->tx_post_msg.context = devrec;
+	devrec->tx_post_trx.len = 2;
+	devrec->tx_post_trx.tx_buf = devrec->tx_post_buf;
+	spi_message_add_tail(&devrec->tx_post_trx, &devrec->tx_post_msg);
+}
+
+static void
+mrf24j40_setup_rx_spi_messages(struct mrf24j40 *devrec)
+{
+	spi_message_init(&devrec->rx_msg);
+	devrec->rx_msg.context = devrec;
+	devrec->rx_trx.len = 2;
+	devrec->rx_trx.tx_buf = devrec->rx_buf;
+	devrec->rx_trx.rx_buf = devrec->rx_buf;
+	spi_message_add_tail(&devrec->rx_trx, &devrec->rx_msg);
+
+	spi_message_init(&devrec->rx_buf_msg);
+	devrec->rx_buf_msg.context = devrec;
+	devrec->rx_buf_msg.complete = mrf24j40_handle_rx_read_buf_complete;
+	devrec->rx_addr_trx.len = 2;
+	devrec->rx_addr_trx.tx_buf = devrec->rx_addr_buf;
+	spi_message_add_tail(&devrec->rx_addr_trx, &devrec->rx_buf_msg);
+	devrec->rx_fifo_buf_trx.rx_buf = devrec->rx_fifo_buf;
+	spi_message_add_tail(&devrec->rx_fifo_buf_trx, &devrec->rx_buf_msg);
+	devrec->rx_lqi_trx.len = 2;
+	devrec->rx_lqi_trx.rx_buf = devrec->rx_lqi_buf;
+	spi_message_add_tail(&devrec->rx_lqi_trx, &devrec->rx_buf_msg);
+}
+
+static void
+mrf24j40_setup_irq_spi_messages(struct mrf24j40 *devrec)
+{
+	spi_message_init(&devrec->irq_msg);
+	devrec->irq_msg.context = devrec;
+	devrec->irq_msg.complete = mrf24j40_intstat_complete;
+	devrec->irq_trx.len = 2;
+	devrec->irq_trx.tx_buf = devrec->irq_buf;
+	devrec->irq_trx.rx_buf = devrec->irq_buf;
+	spi_message_add_tail(&devrec->irq_trx, &devrec->irq_msg);
+}
+
+static void  mrf24j40_phy_setup(struct mrf24j40 *devrec)
+{
+	ieee802154_random_extended_addr(&devrec->hw->phy->perm_extended_addr);
+	devrec->hw->phy->current_channel = 11;
+
+	/* mrf24j40 supports max_minbe 0 - 3 */
+	devrec->hw->phy->supported.max_minbe = 3;
+	/* datasheet doesn't say anything about max_be, but we have min_be
+	 * So we assume the max_be default.
+	 */
+	devrec->hw->phy->supported.min_maxbe = 5;
+	devrec->hw->phy->supported.max_maxbe = 5;
+
+	devrec->hw->phy->cca.mode = NL802154_CCA_CARRIER;
+	devrec->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+					       BIT(NL802154_CCA_CARRIER) |
+					       BIT(NL802154_CCA_ENERGY_CARRIER);
+	devrec->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND);
+
+	devrec->hw->phy->cca_ed_level = -6900;
+	devrec->hw->phy->supported.cca_ed_levels = mrf24j40_ed_levels;
+	devrec->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(mrf24j40_ed_levels);
+
+	switch (spi_get_device_id(devrec->spi)->driver_data) {
+	case MRF24J40:
+	case MRF24J40MA:
+		devrec->hw->phy->supported.tx_powers = mrf24j40ma_powers;
+		devrec->hw->phy->supported.tx_powers_size = ARRAY_SIZE(mrf24j40ma_powers);
+		devrec->hw->phy->flags |= WPAN_PHY_FLAG_TXPOWER;
+		break;
+	default:
+		break;
+	}
+}
+
+static int mrf24j40_probe(struct spi_device *spi)
+{
+	int ret = -ENOMEM, irq_type;
+	struct ieee802154_hw *hw;
+	struct mrf24j40 *devrec;
+
+	dev_info(&spi->dev, "probe(). IRQ: %d\n", spi->irq);
+
+	/* Register with the 802154 subsystem */
+
+	hw = ieee802154_alloc_hw(sizeof(*devrec), &mrf24j40_ops);
+	if (!hw)
+		goto err_ret;
+
+	devrec = hw->priv;
+	devrec->spi = spi;
+	spi_set_drvdata(spi, devrec);
+	devrec->hw = hw;
+	devrec->hw->parent = &spi->dev;
+	devrec->hw->phy->supported.channels[0] = CHANNEL_MASK;
+	devrec->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
+			    IEEE802154_HW_CSMA_PARAMS |
+			    IEEE802154_HW_PROMISCUOUS;
+
+	devrec->hw->phy->flags = WPAN_PHY_FLAG_CCA_MODE |
+				 WPAN_PHY_FLAG_CCA_ED_LEVEL;
+
+	mrf24j40_setup_tx_spi_messages(devrec);
+	mrf24j40_setup_rx_spi_messages(devrec);
+	mrf24j40_setup_irq_spi_messages(devrec);
+
+	devrec->regmap_short = devm_regmap_init_spi(spi,
+						    &mrf24j40_short_regmap);
+	if (IS_ERR(devrec->regmap_short)) {
+		ret = PTR_ERR(devrec->regmap_short);
+		dev_err(&spi->dev, "Failed to allocate short register map: %d\n",
+			ret);
+		goto err_register_device;
+	}
+
+	devrec->regmap_long = devm_regmap_init(&spi->dev,
+					       &mrf24j40_long_regmap_bus,
+					       spi, &mrf24j40_long_regmap);
+	if (IS_ERR(devrec->regmap_long)) {
+		ret = PTR_ERR(devrec->regmap_long);
+		dev_err(&spi->dev, "Failed to allocate long register map: %d\n",
+			ret);
+		goto err_register_device;
+	}
+
+	if (spi->max_speed_hz > MAX_SPI_SPEED_HZ) {
+		dev_warn(&spi->dev, "spi clock above possible maximum: %d",
+			 MAX_SPI_SPEED_HZ);
+		ret = -EINVAL;
+		goto err_register_device;
+	}
+
+	ret = mrf24j40_hw_init(devrec);
+	if (ret)
+		goto err_register_device;
+
+	mrf24j40_phy_setup(devrec);
+
+	/* request IRQF_TRIGGER_LOW as fallback default */
+	irq_type = irq_get_trigger_type(spi->irq);
+	if (!irq_type)
+		irq_type = IRQF_TRIGGER_LOW;
+
+	ret = devm_request_irq(&spi->dev, spi->irq, mrf24j40_isr,
+			       irq_type, dev_name(&spi->dev), devrec);
+	if (ret) {
+		dev_err(printdev(devrec), "Unable to get IRQ");
+		goto err_register_device;
+	}
+
+	dev_dbg(printdev(devrec), "registered mrf24j40\n");
+	ret = ieee802154_register_hw(devrec->hw);
+	if (ret)
+		goto err_register_device;
+
+	return 0;
+
+err_register_device:
+	ieee802154_free_hw(devrec->hw);
+err_ret:
+	return ret;
+}
+
+static void mrf24j40_remove(struct spi_device *spi)
+{
+	struct mrf24j40 *devrec = spi_get_drvdata(spi);
+
+	dev_dbg(printdev(devrec), "remove\n");
+
+	ieee802154_unregister_hw(devrec->hw);
+	ieee802154_free_hw(devrec->hw);
+	/* TODO: Will ieee802154_free_device() wait until ->xmit() is
+	 * complete? */
+}
+
+static const struct of_device_id mrf24j40_of_match[] = {
+	{ .compatible = "microchip,mrf24j40", .data = (void *)MRF24J40 },
+	{ .compatible = "microchip,mrf24j40ma", .data = (void *)MRF24J40MA },
+	{ .compatible = "microchip,mrf24j40mc", .data = (void *)MRF24J40MC },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mrf24j40_of_match);
+
+static const struct spi_device_id mrf24j40_ids[] = {
+	{ "mrf24j40", MRF24J40 },
+	{ "mrf24j40ma", MRF24J40MA },
+	{ "mrf24j40mc", MRF24J40MC },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, mrf24j40_ids);
+
+static struct spi_driver mrf24j40_driver = {
+	.driver = {
+		.of_match_table = mrf24j40_of_match,
+		.name = "mrf24j40",
+	},
+	.id_table = mrf24j40_ids,
+	.probe = mrf24j40_probe,
+	.remove = mrf24j40_remove,
+};
+
+module_spi_driver(mrf24j40_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alan Ott");
+MODULE_DESCRIPTION("MRF24J40 SPI 802.15.4 Controller Driver");