Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 651 insertions, 0 deletions

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
new file mode 100644
index 000000000..267e6fd3d
--- /dev/null
+++ b/drivers/net/phy/dp83822.c
@@ -0,0 +1,651 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Driver for the Texas Instruments DP83822, DP83825 and DP83826 PHYs.
+ *
+ * Copyright (C) 2017 Texas Instruments Inc.
+ */
+
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+
+#define DP83822_PHY_ID	        0x2000a240
+#define DP83825S_PHY_ID		0x2000a140
+#define DP83825I_PHY_ID		0x2000a150
+#define DP83825CM_PHY_ID	0x2000a160
+#define DP83825CS_PHY_ID	0x2000a170
+#define DP83826C_PHY_ID		0x2000a130
+#define DP83826NC_PHY_ID	0x2000a110
+
+#define DP83822_DEVADDR		0x1f
+
+#define MII_DP83822_CTRL_2	0x0a
+#define MII_DP83822_PHYSTS	0x10
+#define MII_DP83822_PHYSCR	0x11
+#define MII_DP83822_MISR1	0x12
+#define MII_DP83822_MISR2	0x13
+#define MII_DP83822_FCSCR	0x14
+#define MII_DP83822_RCSR	0x17
+#define MII_DP83822_RESET_CTRL	0x1f
+#define MII_DP83822_GENCFG	0x465
+#define MII_DP83822_SOR1	0x467
+
+/* GENCFG */
+#define DP83822_SIG_DET_LOW	BIT(0)
+
+/* Control Register 2 bits */
+#define DP83822_FX_ENABLE	BIT(14)
+
+#define DP83822_HW_RESET	BIT(15)
+#define DP83822_SW_RESET	BIT(14)
+
+/* PHY STS bits */
+#define DP83822_PHYSTS_DUPLEX			BIT(2)
+#define DP83822_PHYSTS_10			BIT(1)
+#define DP83822_PHYSTS_LINK			BIT(0)
+
+/* PHYSCR Register Fields */
+#define DP83822_PHYSCR_INT_OE		BIT(0) /* Interrupt Output Enable */
+#define DP83822_PHYSCR_INTEN		BIT(1) /* Interrupt Enable */
+
+/* MISR1 bits */
+#define DP83822_RX_ERR_HF_INT_EN	BIT(0)
+#define DP83822_FALSE_CARRIER_HF_INT_EN	BIT(1)
+#define DP83822_ANEG_COMPLETE_INT_EN	BIT(2)
+#define DP83822_DUP_MODE_CHANGE_INT_EN	BIT(3)
+#define DP83822_SPEED_CHANGED_INT_EN	BIT(4)
+#define DP83822_LINK_STAT_INT_EN	BIT(5)
+#define DP83822_ENERGY_DET_INT_EN	BIT(6)
+#define DP83822_LINK_QUAL_INT_EN	BIT(7)
+
+/* MISR2 bits */
+#define DP83822_JABBER_DET_INT_EN	BIT(0)
+#define DP83822_WOL_PKT_INT_EN		BIT(1)
+#define DP83822_SLEEP_MODE_INT_EN	BIT(2)
+#define DP83822_MDI_XOVER_INT_EN	BIT(3)
+#define DP83822_LB_FIFO_INT_EN		BIT(4)
+#define DP83822_PAGE_RX_INT_EN		BIT(5)
+#define DP83822_ANEG_ERR_INT_EN		BIT(6)
+#define DP83822_EEE_ERROR_CHANGE_INT_EN	BIT(7)
+
+/* INT_STAT1 bits */
+#define DP83822_WOL_INT_EN	BIT(4)
+#define DP83822_WOL_INT_STAT	BIT(12)
+
+#define MII_DP83822_RXSOP1	0x04a5
+#define	MII_DP83822_RXSOP2	0x04a6
+#define	MII_DP83822_RXSOP3	0x04a7
+
+/* WoL Registers */
+#define	MII_DP83822_WOL_CFG	0x04a0
+#define	MII_DP83822_WOL_STAT	0x04a1
+#define	MII_DP83822_WOL_DA1	0x04a2
+#define	MII_DP83822_WOL_DA2	0x04a3
+#define	MII_DP83822_WOL_DA3	0x04a4
+
+/* WoL bits */
+#define DP83822_WOL_MAGIC_EN	BIT(0)
+#define DP83822_WOL_SECURE_ON	BIT(5)
+#define DP83822_WOL_EN		BIT(7)
+#define DP83822_WOL_INDICATION_SEL BIT(8)
+#define DP83822_WOL_CLR_INDICATION BIT(11)
+
+/* RCSR bits */
+#define DP83822_RGMII_MODE_EN	BIT(9)
+#define DP83822_RX_CLK_SHIFT	BIT(12)
+#define DP83822_TX_CLK_SHIFT	BIT(11)
+
+/* SOR1 mode */
+#define DP83822_STRAP_MODE1	0
+#define DP83822_STRAP_MODE2	BIT(0)
+#define DP83822_STRAP_MODE3	BIT(1)
+#define DP83822_STRAP_MODE4	GENMASK(1, 0)
+
+#define DP83822_COL_STRAP_MASK	GENMASK(11, 10)
+#define DP83822_COL_SHIFT	10
+#define DP83822_RX_ER_STR_MASK	GENMASK(9, 8)
+#define DP83822_RX_ER_SHIFT	8
+
+#define MII_DP83822_FIBER_ADVERTISE    (ADVERTISED_TP | ADVERTISED_MII | \
+					ADVERTISED_FIBRE | \
+					ADVERTISED_Pause | ADVERTISED_Asym_Pause)
+
+struct dp83822_private {
+	bool fx_signal_det_low;
+	int fx_enabled;
+	u16 fx_sd_enable;
+};
+
+static int dp83822_set_wol(struct phy_device *phydev,
+			   struct ethtool_wolinfo *wol)
+{
+	struct net_device *ndev = phydev->attached_dev;
+	u16 value;
+	const u8 *mac;
+
+	if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
+		mac = (const u8 *)ndev->dev_addr;
+
+		if (!is_valid_ether_addr(mac))
+			return -EINVAL;
+
+		/* MAC addresses start with byte 5, but stored in mac[0].
+		 * 822 PHYs store bytes 4|5, 2|3, 0|1
+		 */
+		phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA1,
+			      (mac[1] << 8) | mac[0]);
+		phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA2,
+			      (mac[3] << 8) | mac[2]);
+		phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA3,
+			      (mac[5] << 8) | mac[4]);
+
+		value = phy_read_mmd(phydev, DP83822_DEVADDR,
+				     MII_DP83822_WOL_CFG);
+		if (wol->wolopts & WAKE_MAGIC)
+			value |= DP83822_WOL_MAGIC_EN;
+		else
+			value &= ~DP83822_WOL_MAGIC_EN;
+
+		if (wol->wolopts & WAKE_MAGICSECURE) {
+			phy_write_mmd(phydev, DP83822_DEVADDR,
+				      MII_DP83822_RXSOP1,
+				      (wol->sopass[1] << 8) | wol->sopass[0]);
+			phy_write_mmd(phydev, DP83822_DEVADDR,
+				      MII_DP83822_RXSOP2,
+				      (wol->sopass[3] << 8) | wol->sopass[2]);
+			phy_write_mmd(phydev, DP83822_DEVADDR,
+				      MII_DP83822_RXSOP3,
+				      (wol->sopass[5] << 8) | wol->sopass[4]);
+			value |= DP83822_WOL_SECURE_ON;
+		} else {
+			value &= ~DP83822_WOL_SECURE_ON;
+		}
+
+		/* Clear any pending WoL interrupt */
+		phy_read(phydev, MII_DP83822_MISR2);
+
+		value |= DP83822_WOL_EN | DP83822_WOL_INDICATION_SEL |
+			 DP83822_WOL_CLR_INDICATION;
+
+		return phy_write_mmd(phydev, DP83822_DEVADDR,
+				     MII_DP83822_WOL_CFG, value);
+	} else {
+		return phy_clear_bits_mmd(phydev, DP83822_DEVADDR,
+					  MII_DP83822_WOL_CFG, DP83822_WOL_EN);
+	}
+}
+
+static void dp83822_get_wol(struct phy_device *phydev,
+			    struct ethtool_wolinfo *wol)
+{
+	int value;
+	u16 sopass_val;
+
+	wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE);
+	wol->wolopts = 0;
+
+	value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
+
+	if (value & DP83822_WOL_MAGIC_EN)
+		wol->wolopts |= WAKE_MAGIC;
+
+	if (value & DP83822_WOL_SECURE_ON) {
+		sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
+					  MII_DP83822_RXSOP1);
+		wol->sopass[0] = (sopass_val & 0xff);
+		wol->sopass[1] = (sopass_val >> 8);
+
+		sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
+					  MII_DP83822_RXSOP2);
+		wol->sopass[2] = (sopass_val & 0xff);
+		wol->sopass[3] = (sopass_val >> 8);
+
+		sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
+					  MII_DP83822_RXSOP3);
+		wol->sopass[4] = (sopass_val & 0xff);
+		wol->sopass[5] = (sopass_val >> 8);
+
+		wol->wolopts |= WAKE_MAGICSECURE;
+	}
+
+	/* WoL is not enabled so set wolopts to 0 */
+	if (!(value & DP83822_WOL_EN))
+		wol->wolopts = 0;
+}
+
+static int dp83822_config_intr(struct phy_device *phydev)
+{
+	struct dp83822_private *dp83822 = phydev->priv;
+	int misr_status;
+	int physcr_status;
+	int err;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		misr_status = phy_read(phydev, MII_DP83822_MISR1);
+		if (misr_status < 0)
+			return misr_status;
+
+		misr_status |= (DP83822_LINK_STAT_INT_EN |
+				DP83822_ENERGY_DET_INT_EN |
+				DP83822_LINK_QUAL_INT_EN);
+
+		/* Private data pointer is NULL on DP83825/26 */
+		if (!dp83822 || !dp83822->fx_enabled)
+			misr_status |= DP83822_ANEG_COMPLETE_INT_EN |
+				       DP83822_DUP_MODE_CHANGE_INT_EN |
+				       DP83822_SPEED_CHANGED_INT_EN;
+
+
+		err = phy_write(phydev, MII_DP83822_MISR1, misr_status);
+		if (err < 0)
+			return err;
+
+		misr_status = phy_read(phydev, MII_DP83822_MISR2);
+		if (misr_status < 0)
+			return misr_status;
+
+		misr_status |= (DP83822_JABBER_DET_INT_EN |
+				DP83822_SLEEP_MODE_INT_EN |
+				DP83822_LB_FIFO_INT_EN |
+				DP83822_PAGE_RX_INT_EN |
+				DP83822_EEE_ERROR_CHANGE_INT_EN);
+
+		/* Private data pointer is NULL on DP83825/26 */
+		if (!dp83822 || !dp83822->fx_enabled)
+			misr_status |= DP83822_ANEG_ERR_INT_EN |
+				       DP83822_WOL_PKT_INT_EN;
+
+		err = phy_write(phydev, MII_DP83822_MISR2, misr_status);
+		if (err < 0)
+			return err;
+
+		physcr_status = phy_read(phydev, MII_DP83822_PHYSCR);
+		if (physcr_status < 0)
+			return physcr_status;
+
+		physcr_status |= DP83822_PHYSCR_INT_OE | DP83822_PHYSCR_INTEN;
+
+	} else {
+		err = phy_write(phydev, MII_DP83822_MISR1, 0);
+		if (err < 0)
+			return err;
+
+		err = phy_write(phydev, MII_DP83822_MISR2, 0);
+		if (err < 0)
+			return err;
+
+		physcr_status = phy_read(phydev, MII_DP83822_PHYSCR);
+		if (physcr_status < 0)
+			return physcr_status;
+
+		physcr_status &= ~DP83822_PHYSCR_INTEN;
+	}
+
+	return phy_write(phydev, MII_DP83822_PHYSCR, physcr_status);
+}
+
+static irqreturn_t dp83822_handle_interrupt(struct phy_device *phydev)
+{
+	bool trigger_machine = false;
+	int irq_status;
+
+	/* The MISR1 and MISR2 registers are holding the interrupt status in
+	 * the upper half (15:8), while the lower half (7:0) is used for
+	 * controlling the interrupt enable state of those individual interrupt
+	 * sources. To determine the possible interrupt sources, just read the
+	 * MISR* register and use it directly to know which interrupts have
+	 * been enabled previously or not.
+	 */
+	irq_status = phy_read(phydev, MII_DP83822_MISR1);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+	if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
+		trigger_machine = true;
+
+	irq_status = phy_read(phydev, MII_DP83822_MISR2);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+	if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
+		trigger_machine = true;
+
+	if (!trigger_machine)
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int dp8382x_disable_wol(struct phy_device *phydev)
+{
+	return phy_clear_bits_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
+				  DP83822_WOL_EN | DP83822_WOL_MAGIC_EN |
+				  DP83822_WOL_SECURE_ON);
+}
+
+static int dp83822_read_status(struct phy_device *phydev)
+{
+	struct dp83822_private *dp83822 = phydev->priv;
+	int status = phy_read(phydev, MII_DP83822_PHYSTS);
+	int ctrl2;
+	int ret;
+
+	if (dp83822->fx_enabled) {
+		if (status & DP83822_PHYSTS_LINK) {
+			phydev->speed = SPEED_UNKNOWN;
+			phydev->duplex = DUPLEX_UNKNOWN;
+		} else {
+			ctrl2 = phy_read(phydev, MII_DP83822_CTRL_2);
+			if (ctrl2 < 0)
+				return ctrl2;
+
+			if (!(ctrl2 & DP83822_FX_ENABLE)) {
+				ret = phy_write(phydev, MII_DP83822_CTRL_2,
+						DP83822_FX_ENABLE | ctrl2);
+				if (ret < 0)
+					return ret;
+			}
+		}
+	}
+
+	ret = genphy_read_status(phydev);
+	if (ret)
+		return ret;
+
+	if (status < 0)
+		return status;
+
+	if (status & DP83822_PHYSTS_DUPLEX)
+		phydev->duplex = DUPLEX_FULL;
+	else
+		phydev->duplex = DUPLEX_HALF;
+
+	if (status & DP83822_PHYSTS_10)
+		phydev->speed = SPEED_10;
+	else
+		phydev->speed = SPEED_100;
+
+	return 0;
+}
+
+static int dp83822_config_init(struct phy_device *phydev)
+{
+	struct dp83822_private *dp83822 = phydev->priv;
+	struct device *dev = &phydev->mdio.dev;
+	int rgmii_delay;
+	s32 rx_int_delay;
+	s32 tx_int_delay;
+	int err = 0;
+	int bmcr;
+
+	if (phy_interface_is_rgmii(phydev)) {
+		rx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
+						      true);
+
+		if (rx_int_delay <= 0)
+			rgmii_delay = 0;
+		else
+			rgmii_delay = DP83822_RX_CLK_SHIFT;
+
+		tx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
+						      false);
+		if (tx_int_delay <= 0)
+			rgmii_delay &= ~DP83822_TX_CLK_SHIFT;
+		else
+			rgmii_delay |= DP83822_TX_CLK_SHIFT;
+
+		if (rgmii_delay) {
+			err = phy_set_bits_mmd(phydev, DP83822_DEVADDR,
+					       MII_DP83822_RCSR, rgmii_delay);
+			if (err)
+				return err;
+		}
+
+		phy_set_bits_mmd(phydev, DP83822_DEVADDR,
+					MII_DP83822_RCSR, DP83822_RGMII_MODE_EN);
+	} else {
+		phy_clear_bits_mmd(phydev, DP83822_DEVADDR,
+					MII_DP83822_RCSR, DP83822_RGMII_MODE_EN);
+	}
+
+	if (dp83822->fx_enabled) {
+		err = phy_modify(phydev, MII_DP83822_CTRL_2,
+				 DP83822_FX_ENABLE, 1);
+		if (err < 0)
+			return err;
+
+		/* Only allow advertising what this PHY supports */
+		linkmode_and(phydev->advertising, phydev->advertising,
+			     phydev->supported);
+
+		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
+				 phydev->supported);
+		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
+				 phydev->advertising);
+		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT,
+				 phydev->supported);
+		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT,
+				 phydev->supported);
+		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT,
+				 phydev->advertising);
+		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT,
+				 phydev->advertising);
+
+		/* Auto neg is not supported in fiber mode */
+		bmcr = phy_read(phydev, MII_BMCR);
+		if (bmcr < 0)
+			return bmcr;
+
+		if (bmcr & BMCR_ANENABLE) {
+			err =  phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0);
+			if (err < 0)
+				return err;
+		}
+		phydev->autoneg = AUTONEG_DISABLE;
+		linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+				   phydev->supported);
+		linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+				   phydev->advertising);
+
+		/* Setup fiber advertisement */
+		err = phy_modify_changed(phydev, MII_ADVERTISE,
+					 MII_DP83822_FIBER_ADVERTISE,
+					 MII_DP83822_FIBER_ADVERTISE);
+
+		if (err < 0)
+			return err;
+
+		if (dp83822->fx_signal_det_low) {
+			err = phy_set_bits_mmd(phydev, DP83822_DEVADDR,
+					       MII_DP83822_GENCFG,
+					       DP83822_SIG_DET_LOW);
+			if (err)
+				return err;
+		}
+	}
+	return dp8382x_disable_wol(phydev);
+}
+
+static int dp8382x_config_init(struct phy_device *phydev)
+{
+	return dp8382x_disable_wol(phydev);
+}
+
+static int dp83822_phy_reset(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_write(phydev, MII_DP83822_RESET_CTRL, DP83822_SW_RESET);
+	if (err < 0)
+		return err;
+
+	return phydev->drv->config_init(phydev);
+}
+
+#ifdef CONFIG_OF_MDIO
+static int dp83822_of_init(struct phy_device *phydev)
+{
+	struct dp83822_private *dp83822 = phydev->priv;
+	struct device *dev = &phydev->mdio.dev;
+
+	/* Signal detection for the PHY is only enabled if the FX_EN and the
+	 * SD_EN pins are strapped. Signal detection can only enabled if FX_EN
+	 * is strapped otherwise signal detection is disabled for the PHY.
+	 */
+	if (dp83822->fx_enabled && dp83822->fx_sd_enable)
+		dp83822->fx_signal_det_low = device_property_present(dev,
+								     "ti,link-loss-low");
+	if (!dp83822->fx_enabled)
+		dp83822->fx_enabled = device_property_present(dev,
+							      "ti,fiber-mode");
+
+	return 0;
+}
+#else
+static int dp83822_of_init(struct phy_device *phydev)
+{
+	return 0;
+}
+#endif /* CONFIG_OF_MDIO */
+
+static int dp83822_read_straps(struct phy_device *phydev)
+{
+	struct dp83822_private *dp83822 = phydev->priv;
+	int fx_enabled, fx_sd_enable;
+	int val;
+
+	val = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_SOR1);
+	if (val < 0)
+		return val;
+
+	fx_enabled = (val & DP83822_COL_STRAP_MASK) >> DP83822_COL_SHIFT;
+	if (fx_enabled == DP83822_STRAP_MODE2 ||
+	    fx_enabled == DP83822_STRAP_MODE3)
+		dp83822->fx_enabled = 1;
+
+	if (dp83822->fx_enabled) {
+		fx_sd_enable = (val & DP83822_RX_ER_STR_MASK) >> DP83822_RX_ER_SHIFT;
+		if (fx_sd_enable == DP83822_STRAP_MODE3 ||
+		    fx_sd_enable == DP83822_STRAP_MODE4)
+			dp83822->fx_sd_enable = 1;
+	}
+
+	return 0;
+}
+
+static int dp83822_probe(struct phy_device *phydev)
+{
+	struct dp83822_private *dp83822;
+	int ret;
+
+	dp83822 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83822),
+			       GFP_KERNEL);
+	if (!dp83822)
+		return -ENOMEM;
+
+	phydev->priv = dp83822;
+
+	ret = dp83822_read_straps(phydev);
+	if (ret)
+		return ret;
+
+	dp83822_of_init(phydev);
+
+	if (dp83822->fx_enabled)
+		phydev->port = PORT_FIBRE;
+
+	return 0;
+}
+
+static int dp83822_suspend(struct phy_device *phydev)
+{
+	int value;
+
+	value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
+
+	if (!(value & DP83822_WOL_EN))
+		genphy_suspend(phydev);
+
+	return 0;
+}
+
+static int dp83822_resume(struct phy_device *phydev)
+{
+	int value;
+
+	genphy_resume(phydev);
+
+	value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);
+
+	phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, value |
+		      DP83822_WOL_CLR_INDICATION);
+
+	return 0;
+}
+
+#define DP83822_PHY_DRIVER(_id, _name)				\
+	{							\
+		PHY_ID_MATCH_MODEL(_id),			\
+		.name		= (_name),			\
+		/* PHY_BASIC_FEATURES */			\
+		.probe          = dp83822_probe,		\
+		.soft_reset	= dp83822_phy_reset,		\
+		.config_init	= dp83822_config_init,		\
+		.read_status	= dp83822_read_status,		\
+		.get_wol = dp83822_get_wol,			\
+		.set_wol = dp83822_set_wol,			\
+		.config_intr = dp83822_config_intr,		\
+		.handle_interrupt = dp83822_handle_interrupt,	\
+		.suspend = dp83822_suspend,			\
+		.resume = dp83822_resume,			\
+	}
+
+#define DP8382X_PHY_DRIVER(_id, _name)				\
+	{							\
+		PHY_ID_MATCH_MODEL(_id),			\
+		.name		= (_name),			\
+		/* PHY_BASIC_FEATURES */			\
+		.soft_reset	= dp83822_phy_reset,		\
+		.config_init	= dp8382x_config_init,		\
+		.get_wol = dp83822_get_wol,			\
+		.set_wol = dp83822_set_wol,			\
+		.config_intr = dp83822_config_intr,		\
+		.handle_interrupt = dp83822_handle_interrupt,	\
+		.suspend = dp83822_suspend,			\
+		.resume = dp83822_resume,			\
+	}
+
+static struct phy_driver dp83822_driver[] = {
+	DP83822_PHY_DRIVER(DP83822_PHY_ID, "TI DP83822"),
+	DP8382X_PHY_DRIVER(DP83825I_PHY_ID, "TI DP83825I"),
+	DP8382X_PHY_DRIVER(DP83826C_PHY_ID, "TI DP83826C"),
+	DP8382X_PHY_DRIVER(DP83826NC_PHY_ID, "TI DP83826NC"),
+	DP8382X_PHY_DRIVER(DP83825S_PHY_ID, "TI DP83825S"),
+	DP8382X_PHY_DRIVER(DP83825CM_PHY_ID, "TI DP83825M"),
+	DP8382X_PHY_DRIVER(DP83825CS_PHY_ID, "TI DP83825CS"),
+};
+module_phy_driver(dp83822_driver);
+
+static struct mdio_device_id __maybe_unused dp83822_tbl[] = {
+	{ DP83822_PHY_ID, 0xfffffff0 },
+	{ DP83825I_PHY_ID, 0xfffffff0 },
+	{ DP83826C_PHY_ID, 0xfffffff0 },
+	{ DP83826NC_PHY_ID, 0xfffffff0 },
+	{ DP83825S_PHY_ID, 0xfffffff0 },
+	{ DP83825CM_PHY_ID, 0xfffffff0 },
+	{ DP83825CS_PHY_ID, 0xfffffff0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(mdio, dp83822_tbl);
+
+MODULE_DESCRIPTION("Texas Instruments DP83822 PHY driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
+MODULE_LICENSE("GPL v2");