Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 360 insertions, 0 deletions

diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
new file mode 100644
index 000000000..96ffadd65
--- /dev/null
+++ b/drivers/perf/arm_pmu_acpi.c
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ACPI probing code for ARM performance counters.
+ *
+ * Copyright (C) 2017 ARM Ltd.
+ */
+
+#include <linux/acpi.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
+#include <linux/percpu.h>
+#include <linux/perf/arm_pmu.h>
+
+#include <asm/cputype.h>
+
+static DEFINE_PER_CPU(struct arm_pmu *, probed_pmus);
+static DEFINE_PER_CPU(int, pmu_irqs);
+
+static int arm_pmu_acpi_register_irq(int cpu)
+{
+	struct acpi_madt_generic_interrupt *gicc;
+	int gsi, trigger;
+
+	gicc = acpi_cpu_get_madt_gicc(cpu);
+
+	gsi = gicc->performance_interrupt;
+
+	/*
+	 * Per the ACPI spec, the MADT cannot describe a PMU that doesn't
+	 * have an interrupt. QEMU advertises this by using a GSI of zero,
+	 * which is not known to be valid on any hardware despite being
+	 * valid per the spec. Take the pragmatic approach and reject a
+	 * GSI of zero for now.
+	 */
+	if (!gsi)
+		return 0;
+
+	if (gicc->flags & ACPI_MADT_PERFORMANCE_IRQ_MODE)
+		trigger = ACPI_EDGE_SENSITIVE;
+	else
+		trigger = ACPI_LEVEL_SENSITIVE;
+
+	/*
+	 * Helpfully, the MADT GICC doesn't have a polarity flag for the
+	 * "performance interrupt". Luckily, on compliant GICs the polarity is
+	 * a fixed value in HW (for both SPIs and PPIs) that we cannot change
+	 * from SW.
+	 *
+	 * Here we pass in ACPI_ACTIVE_HIGH to keep the core code happy. This
+	 * may not match the real polarity, but that should not matter.
+	 *
+	 * Other interrupt controllers are not supported with ACPI.
+	 */
+	return acpi_register_gsi(NULL, gsi, trigger, ACPI_ACTIVE_HIGH);
+}
+
+static void arm_pmu_acpi_unregister_irq(int cpu)
+{
+	struct acpi_madt_generic_interrupt *gicc;
+	int gsi;
+
+	gicc = acpi_cpu_get_madt_gicc(cpu);
+
+	gsi = gicc->performance_interrupt;
+	if (gsi)
+		acpi_unregister_gsi(gsi);
+}
+
+#if IS_ENABLED(CONFIG_ARM_SPE_PMU)
+static struct resource spe_resources[] = {
+	{
+		/* irq */
+		.flags          = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device spe_dev = {
+	.name = ARMV8_SPE_PDEV_NAME,
+	.id = -1,
+	.resource = spe_resources,
+	.num_resources = ARRAY_SIZE(spe_resources)
+};
+
+/*
+ * For lack of a better place, hook the normal PMU MADT walk
+ * and create a SPE device if we detect a recent MADT with
+ * a homogeneous PPI mapping.
+ */
+static void arm_spe_acpi_register_device(void)
+{
+	int cpu, hetid, irq, ret;
+	bool first = true;
+	u16 gsi = 0;
+
+	/*
+	 * Sanity check all the GICC tables for the same interrupt number.
+	 * For now, we only support homogeneous ACPI/SPE machines.
+	 */
+	for_each_possible_cpu(cpu) {
+		struct acpi_madt_generic_interrupt *gicc;
+
+		gicc = acpi_cpu_get_madt_gicc(cpu);
+		if (gicc->header.length < ACPI_MADT_GICC_SPE)
+			return;
+
+		if (first) {
+			gsi = gicc->spe_interrupt;
+			if (!gsi)
+				return;
+			hetid = find_acpi_cpu_topology_hetero_id(cpu);
+			first = false;
+		} else if ((gsi != gicc->spe_interrupt) ||
+			   (hetid != find_acpi_cpu_topology_hetero_id(cpu))) {
+			pr_warn("ACPI: SPE must be homogeneous\n");
+			return;
+		}
+	}
+
+	irq = acpi_register_gsi(NULL, gsi, ACPI_LEVEL_SENSITIVE,
+				ACPI_ACTIVE_HIGH);
+	if (irq < 0) {
+		pr_warn("ACPI: SPE Unable to register interrupt: %d\n", gsi);
+		return;
+	}
+
+	spe_resources[0].start = irq;
+	ret = platform_device_register(&spe_dev);
+	if (ret < 0) {
+		pr_warn("ACPI: SPE: Unable to register device\n");
+		acpi_unregister_gsi(gsi);
+	}
+}
+#else
+static inline void arm_spe_acpi_register_device(void)
+{
+}
+#endif /* CONFIG_ARM_SPE_PMU */
+
+static int arm_pmu_acpi_parse_irqs(void)
+{
+	int irq, cpu, irq_cpu, err;
+
+	for_each_possible_cpu(cpu) {
+		irq = arm_pmu_acpi_register_irq(cpu);
+		if (irq < 0) {
+			err = irq;
+			pr_warn("Unable to parse ACPI PMU IRQ for CPU%d: %d\n",
+				cpu, err);
+			goto out_err;
+		} else if (irq == 0) {
+			pr_warn("No ACPI PMU IRQ for CPU%d\n", cpu);
+		}
+
+		/*
+		 * Log and request the IRQ so the core arm_pmu code can manage
+		 * it. We'll have to sanity-check IRQs later when we associate
+		 * them with their PMUs.
+		 */
+		per_cpu(pmu_irqs, cpu) = irq;
+		err = armpmu_request_irq(irq, cpu);
+		if (err)
+			goto out_err;
+	}
+
+	return 0;
+
+out_err:
+	for_each_possible_cpu(cpu) {
+		irq = per_cpu(pmu_irqs, cpu);
+		if (!irq)
+			continue;
+
+		arm_pmu_acpi_unregister_irq(cpu);
+
+		/*
+		 * Blat all copies of the IRQ so that we only unregister the
+		 * corresponding GSI once (e.g. when we have PPIs).
+		 */
+		for_each_possible_cpu(irq_cpu) {
+			if (per_cpu(pmu_irqs, irq_cpu) == irq)
+				per_cpu(pmu_irqs, irq_cpu) = 0;
+		}
+	}
+
+	return err;
+}
+
+static struct arm_pmu *arm_pmu_acpi_find_alloc_pmu(void)
+{
+	unsigned long cpuid = read_cpuid_id();
+	struct arm_pmu *pmu;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		pmu = per_cpu(probed_pmus, cpu);
+		if (!pmu || pmu->acpi_cpuid != cpuid)
+			continue;
+
+		return pmu;
+	}
+
+	pmu = armpmu_alloc_atomic();
+	if (!pmu) {
+		pr_warn("Unable to allocate PMU for CPU%d\n",
+			smp_processor_id());
+		return NULL;
+	}
+
+	pmu->acpi_cpuid = cpuid;
+
+	return pmu;
+}
+
+/*
+ * Check whether the new IRQ is compatible with those already associated with
+ * the PMU (e.g. we don't have mismatched PPIs).
+ */
+static bool pmu_irq_matches(struct arm_pmu *pmu, int irq)
+{
+	struct pmu_hw_events __percpu *hw_events = pmu->hw_events;
+	int cpu;
+
+	if (!irq)
+		return true;
+
+	for_each_cpu(cpu, &pmu->supported_cpus) {
+		int other_irq = per_cpu(hw_events->irq, cpu);
+		if (!other_irq)
+			continue;
+
+		if (irq == other_irq)
+			continue;
+		if (!irq_is_percpu_devid(irq) && !irq_is_percpu_devid(other_irq))
+			continue;
+
+		pr_warn("mismatched PPIs detected\n");
+		return false;
+	}
+
+	return true;
+}
+
+/*
+ * This must run before the common arm_pmu hotplug logic, so that we can
+ * associate a CPU and its interrupt before the common code tries to manage the
+ * affinity and so on.
+ *
+ * Note that hotplug events are serialized, so we cannot race with another CPU
+ * coming up. The perf core won't open events while a hotplug event is in
+ * progress.
+ */
+static int arm_pmu_acpi_cpu_starting(unsigned int cpu)
+{
+	struct arm_pmu *pmu;
+	struct pmu_hw_events __percpu *hw_events;
+	int irq;
+
+	/* If we've already probed this CPU, we have nothing to do */
+	if (per_cpu(probed_pmus, cpu))
+		return 0;
+
+	irq = per_cpu(pmu_irqs, cpu);
+
+	pmu = arm_pmu_acpi_find_alloc_pmu();
+	if (!pmu)
+		return -ENOMEM;
+
+	per_cpu(probed_pmus, cpu) = pmu;
+
+	if (pmu_irq_matches(pmu, irq)) {
+		hw_events = pmu->hw_events;
+		per_cpu(hw_events->irq, cpu) = irq;
+	}
+
+	cpumask_set_cpu(cpu, &pmu->supported_cpus);
+
+	/*
+	 * Ideally, we'd probe the PMU here when we find the first matching
+	 * CPU. We can't do that for several reasons; see the comment in
+	 * arm_pmu_acpi_init().
+	 *
+	 * So for the time being, we're done.
+	 */
+	return 0;
+}
+
+int arm_pmu_acpi_probe(armpmu_init_fn init_fn)
+{
+	int pmu_idx = 0;
+	int cpu, ret;
+
+	/*
+	 * Initialise and register the set of PMUs which we know about right
+	 * now. Ideally we'd do this in arm_pmu_acpi_cpu_starting() so that we
+	 * could handle late hotplug, but this may lead to deadlock since we
+	 * might try to register a hotplug notifier instance from within a
+	 * hotplug notifier.
+	 *
+	 * There's also the problem of having access to the right init_fn,
+	 * without tying this too deeply into the "real" PMU driver.
+	 *
+	 * For the moment, as with the platform/DT case, we need at least one
+	 * of a PMU's CPUs to be online at probe time.
+	 */
+	for_each_possible_cpu(cpu) {
+		struct arm_pmu *pmu = per_cpu(probed_pmus, cpu);
+		char *base_name;
+
+		if (!pmu || pmu->name)
+			continue;
+
+		ret = init_fn(pmu);
+		if (ret == -ENODEV) {
+			/* PMU not handled by this driver, or not present */
+			continue;
+		} else if (ret) {
+			pr_warn("Unable to initialise PMU for CPU%d\n", cpu);
+			return ret;
+		}
+
+		base_name = pmu->name;
+		pmu->name = kasprintf(GFP_KERNEL, "%s_%d", base_name, pmu_idx++);
+		if (!pmu->name) {
+			pr_warn("Unable to allocate PMU name for CPU%d\n", cpu);
+			return -ENOMEM;
+		}
+
+		ret = armpmu_register(pmu);
+		if (ret) {
+			pr_warn("Failed to register PMU for CPU%d\n", cpu);
+			kfree(pmu->name);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int arm_pmu_acpi_init(void)
+{
+	int ret;
+
+	if (acpi_disabled)
+		return 0;
+
+	arm_spe_acpi_register_device();
+
+	ret = arm_pmu_acpi_parse_irqs();
+	if (ret)
+		return ret;
+
+	ret = cpuhp_setup_state(CPUHP_AP_PERF_ARM_ACPI_STARTING,
+				"perf/arm/pmu_acpi:starting",
+				arm_pmu_acpi_cpu_starting, NULL);
+
+	return ret;
+}
+subsys_initcall(arm_pmu_acpi_init)