Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 860 insertions, 0 deletions

diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
new file mode 100644
index 000000000..769c707d9
--- /dev/null
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -0,0 +1,860 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Broadcom SATA3 AHCI Controller PHY Driver
+ *
+ * Copyright (C) 2016 Broadcom
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define SATA_PCB_BANK_OFFSET				0x23c
+#define SATA_PCB_REG_OFFSET(ofs)			((ofs) * 4)
+
+#define MAX_PORTS					2
+
+/* Register offset between PHYs in PCB space */
+#define SATA_PCB_REG_28NM_SPACE_SIZE			0x1000
+
+/* The older SATA PHY registers duplicated per port registers within the map,
+ * rather than having a separate map per port.
+ */
+#define SATA_PCB_REG_40NM_SPACE_SIZE			0x10
+
+/* Register offset between PHYs in PHY control space */
+#define SATA_PHY_CTRL_REG_28NM_SPACE_SIZE		0x8
+
+enum brcm_sata_phy_version {
+	BRCM_SATA_PHY_STB_16NM,
+	BRCM_SATA_PHY_STB_28NM,
+	BRCM_SATA_PHY_STB_40NM,
+	BRCM_SATA_PHY_IPROC_NS2,
+	BRCM_SATA_PHY_IPROC_NSP,
+	BRCM_SATA_PHY_IPROC_SR,
+	BRCM_SATA_PHY_DSL_28NM,
+};
+
+enum brcm_sata_phy_rxaeq_mode {
+	RXAEQ_MODE_OFF = 0,
+	RXAEQ_MODE_AUTO,
+	RXAEQ_MODE_MANUAL,
+};
+
+static enum brcm_sata_phy_rxaeq_mode rxaeq_to_val(const char *m)
+{
+	if (!strcmp(m, "auto"))
+		return RXAEQ_MODE_AUTO;
+	else if (!strcmp(m, "manual"))
+		return RXAEQ_MODE_MANUAL;
+	else
+		return RXAEQ_MODE_OFF;
+}
+
+struct brcm_sata_port {
+	int portnum;
+	struct phy *phy;
+	struct brcm_sata_phy *phy_priv;
+	bool ssc_en;
+	enum brcm_sata_phy_rxaeq_mode rxaeq_mode;
+	u32 rxaeq_val;
+	u32 tx_amplitude_val;
+};
+
+struct brcm_sata_phy {
+	struct device *dev;
+	void __iomem *phy_base;
+	void __iomem *ctrl_base;
+	enum brcm_sata_phy_version version;
+
+	struct brcm_sata_port phys[MAX_PORTS];
+};
+
+enum sata_phy_regs {
+	BLOCK0_REG_BANK				= 0x000,
+	BLOCK0_XGXSSTATUS			= 0x81,
+	BLOCK0_XGXSSTATUS_PLL_LOCK		= BIT(12),
+	BLOCK0_SPARE				= 0x8d,
+	BLOCK0_SPARE_OOB_CLK_SEL_MASK		= 0x3,
+	BLOCK0_SPARE_OOB_CLK_SEL_REFBY2		= 0x1,
+
+	BLOCK1_REG_BANK				= 0x10,
+	BLOCK1_TEST_TX				= 0x83,
+	BLOCK1_TEST_TX_AMP_SHIFT		= 12,
+
+	PLL_REG_BANK_0				= 0x050,
+	PLL_REG_BANK_0_PLLCONTROL_0		= 0x81,
+	PLLCONTROL_0_FREQ_DET_RESTART		= BIT(13),
+	PLLCONTROL_0_FREQ_MONITOR		= BIT(12),
+	PLLCONTROL_0_SEQ_START			= BIT(15),
+	PLL_CAP_CHARGE_TIME			= 0x83,
+	PLL_VCO_CAL_THRESH			= 0x84,
+	PLL_CAP_CONTROL				= 0x85,
+	PLL_FREQ_DET_TIME			= 0x86,
+	PLL_ACTRL2				= 0x8b,
+	PLL_ACTRL2_SELDIV_MASK			= 0x1f,
+	PLL_ACTRL2_SELDIV_SHIFT			= 9,
+	PLL_ACTRL6				= 0x86,
+
+	PLL1_REG_BANK				= 0x060,
+	PLL1_ACTRL2				= 0x82,
+	PLL1_ACTRL3				= 0x83,
+	PLL1_ACTRL4				= 0x84,
+	PLL1_ACTRL5				= 0x85,
+	PLL1_ACTRL6				= 0x86,
+	PLL1_ACTRL7				= 0x87,
+	PLL1_ACTRL8				= 0x88,
+
+	TX_REG_BANK				= 0x070,
+	TX_ACTRL0				= 0x80,
+	TX_ACTRL0_TXPOL_FLIP			= BIT(6),
+	TX_ACTRL5				= 0x85,
+	TX_ACTRL5_SSC_EN			= BIT(11),
+
+	AEQRX_REG_BANK_0			= 0xd0,
+	AEQ_CONTROL1				= 0x81,
+	AEQ_CONTROL1_ENABLE			= BIT(2),
+	AEQ_CONTROL1_FREEZE			= BIT(3),
+	AEQ_FRC_EQ				= 0x83,
+	AEQ_FRC_EQ_FORCE			= BIT(0),
+	AEQ_FRC_EQ_FORCE_VAL			= BIT(1),
+	AEQ_RFZ_FRC_VAL				= BIT(8),
+	AEQRX_REG_BANK_1			= 0xe0,
+	AEQRX_SLCAL0_CTRL0			= 0x82,
+	AEQRX_SLCAL1_CTRL0			= 0x86,
+
+	OOB_REG_BANK				= 0x150,
+	OOB1_REG_BANK				= 0x160,
+	OOB_CTRL1				= 0x80,
+	OOB_CTRL1_BURST_MAX_MASK		= 0xf,
+	OOB_CTRL1_BURST_MAX_SHIFT		= 12,
+	OOB_CTRL1_BURST_MIN_MASK		= 0xf,
+	OOB_CTRL1_BURST_MIN_SHIFT		= 8,
+	OOB_CTRL1_WAKE_IDLE_MAX_MASK		= 0xf,
+	OOB_CTRL1_WAKE_IDLE_MAX_SHIFT		= 4,
+	OOB_CTRL1_WAKE_IDLE_MIN_MASK		= 0xf,
+	OOB_CTRL1_WAKE_IDLE_MIN_SHIFT		= 0,
+	OOB_CTRL2				= 0x81,
+	OOB_CTRL2_SEL_ENA_SHIFT			= 15,
+	OOB_CTRL2_SEL_ENA_RC_SHIFT		= 14,
+	OOB_CTRL2_RESET_IDLE_MAX_MASK		= 0x3f,
+	OOB_CTRL2_RESET_IDLE_MAX_SHIFT		= 8,
+	OOB_CTRL2_BURST_CNT_MASK		= 0x3,
+	OOB_CTRL2_BURST_CNT_SHIFT		= 6,
+	OOB_CTRL2_RESET_IDLE_MIN_MASK		= 0x3f,
+	OOB_CTRL2_RESET_IDLE_MIN_SHIFT		= 0,
+
+	TXPMD_REG_BANK				= 0x1a0,
+	TXPMD_CONTROL1				= 0x81,
+	TXPMD_CONTROL1_TX_SSC_EN_FRC		= BIT(0),
+	TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL	= BIT(1),
+	TXPMD_TX_FREQ_CTRL_CONTROL1		= 0x82,
+	TXPMD_TX_FREQ_CTRL_CONTROL2		= 0x83,
+	TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK	= 0x3ff,
+	TXPMD_TX_FREQ_CTRL_CONTROL3		= 0x84,
+	TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK	= 0x3ff,
+
+	RXPMD_REG_BANK				= 0x1c0,
+	RXPMD_RX_CDR_CONTROL1			= 0x81,
+	RXPMD_RX_PPM_VAL_MASK			= 0x1ff,
+	RXPMD_RXPMD_EN_FRC			= BIT(12),
+	RXPMD_RXPMD_EN_FRC_VAL			= BIT(13),
+	RXPMD_RX_CDR_CDR_PROP_BW		= 0x82,
+	RXPMD_G_CDR_PROP_BW_MASK		= 0x7,
+	RXPMD_G1_CDR_PROP_BW_SHIFT		= 0,
+	RXPMD_G2_CDR_PROP_BW_SHIFT		= 3,
+	RXPMD_G3_CDR_PROB_BW_SHIFT		= 6,
+	RXPMD_RX_CDR_CDR_ACQ_INTEG_BW		= 0x83,
+	RXPMD_G_CDR_ACQ_INT_BW_MASK		= 0x7,
+	RXPMD_G1_CDR_ACQ_INT_BW_SHIFT		= 0,
+	RXPMD_G2_CDR_ACQ_INT_BW_SHIFT		= 3,
+	RXPMD_G3_CDR_ACQ_INT_BW_SHIFT		= 6,
+	RXPMD_RX_CDR_CDR_LOCK_INTEG_BW		= 0x84,
+	RXPMD_G_CDR_LOCK_INT_BW_MASK		= 0x7,
+	RXPMD_G1_CDR_LOCK_INT_BW_SHIFT		= 0,
+	RXPMD_G2_CDR_LOCK_INT_BW_SHIFT		= 3,
+	RXPMD_G3_CDR_LOCK_INT_BW_SHIFT		= 6,
+	RXPMD_RX_FREQ_MON_CONTROL1		= 0x87,
+	RXPMD_MON_CORRECT_EN			= BIT(8),
+	RXPMD_MON_MARGIN_VAL_MASK		= 0xff,
+};
+
+enum sata_phy_ctrl_regs {
+	PHY_CTRL_1				= 0x0,
+	PHY_CTRL_1_RESET			= BIT(0),
+};
+
+static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port)
+{
+	struct brcm_sata_phy *priv = port->phy_priv;
+	u32 size = 0;
+
+	switch (priv->version) {
+	case BRCM_SATA_PHY_IPROC_NS2:
+		size = SATA_PHY_CTRL_REG_28NM_SPACE_SIZE;
+		break;
+	default:
+		dev_err(priv->dev, "invalid phy version\n");
+		break;
+	}
+
+	return priv->ctrl_base + (port->portnum * size);
+}
+
+static void brcm_sata_phy_wr(struct brcm_sata_port *port, u32 bank,
+			     u32 ofs, u32 msk, u32 value)
+{
+	struct brcm_sata_phy *priv = port->phy_priv;
+	void __iomem *pcb_base = priv->phy_base;
+	u32 tmp;
+
+	if (priv->version == BRCM_SATA_PHY_STB_40NM)
+		bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE);
+	else
+		pcb_base += (port->portnum * SATA_PCB_REG_28NM_SPACE_SIZE);
+
+	writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
+	tmp = readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
+	tmp = (tmp & msk) | value;
+	writel(tmp, pcb_base + SATA_PCB_REG_OFFSET(ofs));
+}
+
+static u32 brcm_sata_phy_rd(struct brcm_sata_port *port, u32 bank, u32 ofs)
+{
+	struct brcm_sata_phy *priv = port->phy_priv;
+	void __iomem *pcb_base = priv->phy_base;
+
+	if (priv->version == BRCM_SATA_PHY_STB_40NM)
+		bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE);
+	else
+		pcb_base += (port->portnum * SATA_PCB_REG_28NM_SPACE_SIZE);
+
+	writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
+	return readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
+}
+
+/* These defaults were characterized by H/W group */
+#define STB_FMIN_VAL_DEFAULT	0x3df
+#define STB_FMAX_VAL_DEFAULT	0x3df
+#define STB_FMAX_VAL_SSC	0x83
+
+static void brcm_stb_sata_ssc_init(struct brcm_sata_port *port)
+{
+	struct brcm_sata_phy *priv = port->phy_priv;
+	u32 tmp;
+
+	/* override the TX spread spectrum setting */
+	tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC;
+	brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
+
+	/* set fixed min freq */
+	brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
+			 ~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
+			 STB_FMIN_VAL_DEFAULT);
+
+	/* set fixed max freq depending on SSC config */
+	if (port->ssc_en) {
+		dev_info(priv->dev, "enabling SSC on port%d\n", port->portnum);
+		tmp = STB_FMAX_VAL_SSC;
+	} else {
+		tmp = STB_FMAX_VAL_DEFAULT;
+	}
+
+	brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
+			  ~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);
+}
+
+#define AEQ_FRC_EQ_VAL_SHIFT	2
+#define AEQ_FRC_EQ_VAL_MASK	0x3f
+
+static int brcm_stb_sata_rxaeq_init(struct brcm_sata_port *port)
+{
+	u32 tmp = 0, reg = 0;
+
+	switch (port->rxaeq_mode) {
+	case RXAEQ_MODE_OFF:
+		return 0;
+
+	case RXAEQ_MODE_AUTO:
+		reg = AEQ_CONTROL1;
+		tmp = AEQ_CONTROL1_ENABLE | AEQ_CONTROL1_FREEZE;
+		break;
+
+	case RXAEQ_MODE_MANUAL:
+		reg = AEQ_FRC_EQ;
+		tmp = AEQ_FRC_EQ_FORCE | AEQ_FRC_EQ_FORCE_VAL;
+		if (port->rxaeq_val > AEQ_FRC_EQ_VAL_MASK)
+			return -EINVAL;
+		tmp |= port->rxaeq_val << AEQ_FRC_EQ_VAL_SHIFT;
+		break;
+	}
+
+	brcm_sata_phy_wr(port, AEQRX_REG_BANK_0, reg, ~tmp, tmp);
+	brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, reg, ~tmp, tmp);
+
+	return 0;
+}
+
+static int brcm_stb_sata_init(struct brcm_sata_port *port)
+{
+	brcm_stb_sata_ssc_init(port);
+
+	return brcm_stb_sata_rxaeq_init(port);
+}
+
+static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port)
+{
+	u32 tmp, value;
+
+	/* Reduce CP tail current to 1/16th of its default value */
+	brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0x141);
+
+	/* Turn off CP tail current boost */
+	brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL8, 0, 0xc006);
+
+	/* Set a specific AEQ equalizer value */
+	tmp = AEQ_FRC_EQ_FORCE_VAL | AEQ_FRC_EQ_FORCE;
+	brcm_sata_phy_wr(port, AEQRX_REG_BANK_0, AEQ_FRC_EQ,
+			 ~(tmp | AEQ_RFZ_FRC_VAL |
+			   AEQ_FRC_EQ_VAL_MASK << AEQ_FRC_EQ_VAL_SHIFT),
+			 tmp | 32 << AEQ_FRC_EQ_VAL_SHIFT);
+
+	/* Set RX PPM val center frequency */
+	if (port->ssc_en)
+		value = 0x52;
+	else
+		value = 0;
+	brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CONTROL1,
+			 ~RXPMD_RX_PPM_VAL_MASK, value);
+
+	/* Set proportional loop bandwith Gen1/2/3 */
+	tmp = RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G1_CDR_PROP_BW_SHIFT |
+	      RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G2_CDR_PROP_BW_SHIFT |
+	      RXPMD_G_CDR_PROP_BW_MASK << RXPMD_G3_CDR_PROB_BW_SHIFT;
+	if (port->ssc_en)
+		value = 2 << RXPMD_G1_CDR_PROP_BW_SHIFT |
+			2 << RXPMD_G2_CDR_PROP_BW_SHIFT |
+			2 << RXPMD_G3_CDR_PROB_BW_SHIFT;
+	else
+		value = 1 << RXPMD_G1_CDR_PROP_BW_SHIFT |
+			1 << RXPMD_G2_CDR_PROP_BW_SHIFT |
+			1 << RXPMD_G3_CDR_PROB_BW_SHIFT;
+	brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_PROP_BW, ~tmp,
+			 value);
+
+	/* Set CDR integral loop acquisition bandwidth for Gen1/2/3 */
+	tmp = RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT |
+	      RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT |
+	      RXPMD_G_CDR_ACQ_INT_BW_MASK << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT;
+	if (port->ssc_en)
+		value = 1 << RXPMD_G1_CDR_ACQ_INT_BW_SHIFT |
+			1 << RXPMD_G2_CDR_ACQ_INT_BW_SHIFT |
+			1 << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT;
+	else
+		value = 0;
+	brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_ACQ_INTEG_BW,
+			 ~tmp, value);
+
+	/* Set CDR integral loop locking bandwidth to 1 for Gen 1/2/3 */
+	tmp = RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT |
+	      RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT |
+	      RXPMD_G_CDR_LOCK_INT_BW_MASK << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT;
+	if (port->ssc_en)
+		value = 1 << RXPMD_G1_CDR_LOCK_INT_BW_SHIFT |
+			1 << RXPMD_G2_CDR_LOCK_INT_BW_SHIFT |
+			1 << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT;
+	else
+		value = 0;
+	brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_LOCK_INTEG_BW,
+			 ~tmp, value);
+
+	/* Set no guard band and clamp CDR */
+	tmp = RXPMD_MON_CORRECT_EN | RXPMD_MON_MARGIN_VAL_MASK;
+	if (port->ssc_en)
+		value = 0x51;
+	else
+		value = 0;
+	brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1,
+			 ~tmp, RXPMD_MON_CORRECT_EN | value);
+
+	tmp = GENMASK(15, 12);
+	switch (port->tx_amplitude_val) {
+	case 400:
+		value = BIT(12) | BIT(13);
+		break;
+	case 500:
+		value = BIT(13);
+		break;
+	case 600:
+		value = BIT(12);
+		break;
+	case 800:
+		value = 0;
+		break;
+	default:
+		value = tmp;
+		break;
+	}
+
+	if (value != tmp)
+		brcm_sata_phy_wr(port, BLOCK1_REG_BANK, BLOCK1_TEST_TX, ~tmp,
+				 value);
+
+	/* Turn on/off SSC */
+	brcm_sata_phy_wr(port, TX_REG_BANK, TX_ACTRL5, ~TX_ACTRL5_SSC_EN,
+			 port->ssc_en ? TX_ACTRL5_SSC_EN : 0);
+
+	return 0;
+}
+
+static int brcm_stb_sata_16nm_init(struct brcm_sata_port *port)
+{
+	return brcm_stb_sata_16nm_ssc_init(port);
+}
+
+/* NS2 SATA PLL1 defaults were characterized by H/W group */
+#define NS2_PLL1_ACTRL2_MAGIC	0x1df8
+#define NS2_PLL1_ACTRL3_MAGIC	0x2b00
+#define NS2_PLL1_ACTRL4_MAGIC	0x8824
+
+static int brcm_ns2_sata_init(struct brcm_sata_port *port)
+{
+	int try;
+	unsigned int val;
+	void __iomem *ctrl_base = brcm_sata_ctrl_base(port);
+	struct device *dev = port->phy_priv->dev;
+
+	/* Configure OOB control */
+	val = 0x0;
+	val |= (0xc << OOB_CTRL1_BURST_MAX_SHIFT);
+	val |= (0x4 << OOB_CTRL1_BURST_MIN_SHIFT);
+	val |= (0x9 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT);
+	val |= (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT);
+	brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
+	val = 0x0;
+	val |= (0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT);
+	val |= (0x2 << OOB_CTRL2_BURST_CNT_SHIFT);
+	val |= (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT);
+	brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL2, 0x0, val);
+
+	/* Configure PHY PLL register bank 1 */
+	val = NS2_PLL1_ACTRL2_MAGIC;
+	brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
+	val = NS2_PLL1_ACTRL3_MAGIC;
+	brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
+	val = NS2_PLL1_ACTRL4_MAGIC;
+	brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);
+
+	/* Configure PHY BLOCK0 register bank */
+	/* Set oob_clk_sel to refclk/2 */
+	brcm_sata_phy_wr(port, BLOCK0_REG_BANK, BLOCK0_SPARE,
+			 ~BLOCK0_SPARE_OOB_CLK_SEL_MASK,
+			 BLOCK0_SPARE_OOB_CLK_SEL_REFBY2);
+
+	/* Strobe PHY reset using PHY control register */
+	writel(PHY_CTRL_1_RESET, ctrl_base + PHY_CTRL_1);
+	mdelay(1);
+	writel(0x0, ctrl_base + PHY_CTRL_1);
+	mdelay(1);
+
+	/* Wait for PHY PLL lock by polling pll_lock bit */
+	try = 50;
+	while (try) {
+		val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK,
+					BLOCK0_XGXSSTATUS);
+		if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
+			break;
+		msleep(20);
+		try--;
+	}
+	if (!try) {
+		/* PLL did not lock; give up */
+		dev_err(dev, "port%d PLL did not lock\n", port->portnum);
+		return -ETIMEDOUT;
+	}
+
+	dev_dbg(dev, "port%d initialized\n", port->portnum);
+
+	return 0;
+}
+
+static int brcm_nsp_sata_init(struct brcm_sata_port *port)
+{
+	struct device *dev = port->phy_priv->dev;
+	unsigned int oob_bank;
+	unsigned int val, try;
+
+	/* Configure OOB control */
+	if (port->portnum == 0)
+		oob_bank = OOB_REG_BANK;
+	else if (port->portnum == 1)
+		oob_bank = OOB1_REG_BANK;
+	else
+		return -EINVAL;
+
+	val = 0x0;
+	val |= (0x0f << OOB_CTRL1_BURST_MAX_SHIFT);
+	val |= (0x06 << OOB_CTRL1_BURST_MIN_SHIFT);
+	val |= (0x0f << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT);
+	val |= (0x06 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT);
+	brcm_sata_phy_wr(port, oob_bank, OOB_CTRL1, 0x0, val);
+
+	val = 0x0;
+	val |= (0x2e << OOB_CTRL2_RESET_IDLE_MAX_SHIFT);
+	val |= (0x02 << OOB_CTRL2_BURST_CNT_SHIFT);
+	val |= (0x16 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT);
+	brcm_sata_phy_wr(port, oob_bank, OOB_CTRL2, 0x0, val);
+
+
+	brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_ACTRL2,
+		~(PLL_ACTRL2_SELDIV_MASK << PLL_ACTRL2_SELDIV_SHIFT),
+		0x0c << PLL_ACTRL2_SELDIV_SHIFT);
+
+	brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_CAP_CONTROL,
+						0xff0, 0x4f0);
+
+	val = PLLCONTROL_0_FREQ_DET_RESTART | PLLCONTROL_0_FREQ_MONITOR;
+	brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
+								~val, val);
+	val = PLLCONTROL_0_SEQ_START;
+	brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
+								~val, 0);
+	mdelay(10);
+	brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
+								~val, val);
+
+	/* Wait for pll_seq_done bit */
+	try = 50;
+	while (--try) {
+		val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK,
+					BLOCK0_XGXSSTATUS);
+		if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
+			break;
+		msleep(20);
+	}
+	if (!try) {
+		/* PLL did not lock; give up */
+		dev_err(dev, "port%d PLL did not lock\n", port->portnum);
+		return -ETIMEDOUT;
+	}
+
+	dev_dbg(dev, "port%d initialized\n", port->portnum);
+
+	return 0;
+}
+
+/* SR PHY PLL0 registers */
+#define SR_PLL0_ACTRL6_MAGIC			0xa
+
+/* SR PHY PLL1 registers */
+#define SR_PLL1_ACTRL2_MAGIC			0x32
+#define SR_PLL1_ACTRL3_MAGIC			0x2
+#define SR_PLL1_ACTRL4_MAGIC			0x3e8
+
+static int brcm_sr_sata_init(struct brcm_sata_port *port)
+{
+	struct device *dev = port->phy_priv->dev;
+	unsigned int val, try;
+
+	/* Configure PHY PLL register bank 1 */
+	val = SR_PLL1_ACTRL2_MAGIC;
+	brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
+	val = SR_PLL1_ACTRL3_MAGIC;
+	brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
+	val = SR_PLL1_ACTRL4_MAGIC;
+	brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);
+
+	/* Configure PHY PLL register bank 0 */
+	val = SR_PLL0_ACTRL6_MAGIC;
+	brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_ACTRL6, 0x0, val);
+
+	/* Wait for PHY PLL lock by polling pll_lock bit */
+	try = 50;
+	do {
+		val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK,
+					BLOCK0_XGXSSTATUS);
+		if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
+			break;
+		msleep(20);
+		try--;
+	} while (try);
+
+	if ((val & BLOCK0_XGXSSTATUS_PLL_LOCK) == 0) {
+		/* PLL did not lock; give up */
+		dev_err(dev, "port%d PLL did not lock\n", port->portnum);
+		return -ETIMEDOUT;
+	}
+
+	/* Invert Tx polarity */
+	brcm_sata_phy_wr(port, TX_REG_BANK, TX_ACTRL0,
+			 ~TX_ACTRL0_TXPOL_FLIP, TX_ACTRL0_TXPOL_FLIP);
+
+	/* Configure OOB control to handle 100MHz reference clock */
+	val = ((0xc << OOB_CTRL1_BURST_MAX_SHIFT) |
+		(0x4 << OOB_CTRL1_BURST_MIN_SHIFT) |
+		(0x8 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT) |
+		(0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT));
+	brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
+	val = ((0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT) |
+		(0x2 << OOB_CTRL2_BURST_CNT_SHIFT) |
+		(0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT));
+	brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL2, 0x0, val);
+
+	return 0;
+}
+
+static int brcm_dsl_sata_init(struct brcm_sata_port *port)
+{
+	struct device *dev = port->phy_priv->dev;
+	unsigned int try;
+	u32 tmp;
+
+	brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL7, 0, 0x873);
+
+	brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0xc000);
+
+	brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
+			 0, 0x3089);
+	usleep_range(1000, 2000);
+
+	brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
+			 0, 0x3088);
+	usleep_range(1000, 2000);
+
+	brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, AEQRX_SLCAL0_CTRL0,
+			 0, 0x3000);
+
+	brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, AEQRX_SLCAL1_CTRL0,
+			 0, 0x3000);
+	usleep_range(1000, 2000);
+
+	brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_CAP_CHARGE_TIME, 0, 0x32);
+
+	brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_VCO_CAL_THRESH, 0, 0xa);
+
+	brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_FREQ_DET_TIME, 0, 0x64);
+	usleep_range(1000, 2000);
+
+	/* Acquire PLL lock */
+	try = 50;
+	while (try) {
+		tmp = brcm_sata_phy_rd(port, BLOCK0_REG_BANK,
+				       BLOCK0_XGXSSTATUS);
+		if (tmp & BLOCK0_XGXSSTATUS_PLL_LOCK)
+			break;
+		msleep(20);
+		try--;
+	}
+
+	if (!try) {
+		/* PLL did not lock; give up */
+		dev_err(dev, "port%d PLL did not lock\n", port->portnum);
+		return -ETIMEDOUT;
+	}
+
+	dev_dbg(dev, "port%d initialized\n", port->portnum);
+
+	return 0;
+}
+
+static int brcm_sata_phy_init(struct phy *phy)
+{
+	int rc;
+	struct brcm_sata_port *port = phy_get_drvdata(phy);
+
+	switch (port->phy_priv->version) {
+	case BRCM_SATA_PHY_STB_16NM:
+		rc = brcm_stb_sata_16nm_init(port);
+		break;
+	case BRCM_SATA_PHY_STB_28NM:
+	case BRCM_SATA_PHY_STB_40NM:
+		rc = brcm_stb_sata_init(port);
+		break;
+	case BRCM_SATA_PHY_IPROC_NS2:
+		rc = brcm_ns2_sata_init(port);
+		break;
+	case BRCM_SATA_PHY_IPROC_NSP:
+		rc = brcm_nsp_sata_init(port);
+		break;
+	case BRCM_SATA_PHY_IPROC_SR:
+		rc = brcm_sr_sata_init(port);
+		break;
+	case BRCM_SATA_PHY_DSL_28NM:
+		rc = brcm_dsl_sata_init(port);
+		break;
+	default:
+		rc = -ENODEV;
+	}
+
+	return rc;
+}
+
+static void brcm_stb_sata_calibrate(struct brcm_sata_port *port)
+{
+	u32 tmp = BIT(8);
+
+	brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1,
+			 ~tmp, tmp);
+}
+
+static int brcm_sata_phy_calibrate(struct phy *phy)
+{
+	struct brcm_sata_port *port = phy_get_drvdata(phy);
+	int rc = -EOPNOTSUPP;
+
+	switch (port->phy_priv->version) {
+	case BRCM_SATA_PHY_STB_28NM:
+	case BRCM_SATA_PHY_STB_40NM:
+		brcm_stb_sata_calibrate(port);
+		rc = 0;
+		break;
+	default:
+		break;
+	}
+
+	return rc;
+}
+
+static const struct phy_ops phy_ops = {
+	.init		= brcm_sata_phy_init,
+	.calibrate	= brcm_sata_phy_calibrate,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id brcm_sata_phy_of_match[] = {
+	{ .compatible	= "brcm,bcm7216-sata-phy",
+	  .data = (void *)BRCM_SATA_PHY_STB_16NM },
+	{ .compatible	= "brcm,bcm7445-sata-phy",
+	  .data = (void *)BRCM_SATA_PHY_STB_28NM },
+	{ .compatible	= "brcm,bcm7425-sata-phy",
+	  .data = (void *)BRCM_SATA_PHY_STB_40NM },
+	{ .compatible	= "brcm,iproc-ns2-sata-phy",
+	  .data = (void *)BRCM_SATA_PHY_IPROC_NS2 },
+	{ .compatible = "brcm,iproc-nsp-sata-phy",
+	  .data = (void *)BRCM_SATA_PHY_IPROC_NSP },
+	{ .compatible	= "brcm,iproc-sr-sata-phy",
+	  .data = (void *)BRCM_SATA_PHY_IPROC_SR },
+	{ .compatible	= "brcm,bcm63138-sata-phy",
+	  .data = (void *)BRCM_SATA_PHY_DSL_28NM },
+	{},
+};
+MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
+
+static int brcm_sata_phy_probe(struct platform_device *pdev)
+{
+	const char *rxaeq_mode;
+	struct device *dev = &pdev->dev;
+	struct device_node *dn = dev->of_node, *child;
+	const struct of_device_id *of_id;
+	struct brcm_sata_phy *priv;
+	struct phy_provider *provider;
+	int ret, count = 0;
+
+	if (of_get_child_count(dn) == 0)
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	dev_set_drvdata(dev, priv);
+	priv->dev = dev;
+
+	priv->phy_base = devm_platform_ioremap_resource_byname(pdev, "phy");
+	if (IS_ERR(priv->phy_base))
+		return PTR_ERR(priv->phy_base);
+
+	of_id = of_match_node(brcm_sata_phy_of_match, dn);
+	if (of_id)
+		priv->version = (enum brcm_sata_phy_version)of_id->data;
+	else
+		priv->version = BRCM_SATA_PHY_STB_28NM;
+
+	if (priv->version == BRCM_SATA_PHY_IPROC_NS2) {
+		priv->ctrl_base = devm_platform_ioremap_resource_byname(pdev, "phy-ctrl");
+		if (IS_ERR(priv->ctrl_base))
+			return PTR_ERR(priv->ctrl_base);
+	}
+
+	for_each_available_child_of_node(dn, child) {
+		unsigned int id;
+		struct brcm_sata_port *port;
+
+		if (of_property_read_u32(child, "reg", &id)) {
+			dev_err(dev, "missing reg property in node %pOFn\n",
+					child);
+			ret = -EINVAL;
+			goto put_child;
+		}
+
+		if (id >= MAX_PORTS) {
+			dev_err(dev, "invalid reg: %u\n", id);
+			ret = -EINVAL;
+			goto put_child;
+		}
+		if (priv->phys[id].phy) {
+			dev_err(dev, "already registered port %u\n", id);
+			ret = -EINVAL;
+			goto put_child;
+		}
+
+		port = &priv->phys[id];
+		port->portnum = id;
+		port->phy_priv = priv;
+		port->phy = devm_phy_create(dev, child, &phy_ops);
+		port->rxaeq_mode = RXAEQ_MODE_OFF;
+		if (!of_property_read_string(child, "brcm,rxaeq-mode",
+					     &rxaeq_mode))
+			port->rxaeq_mode = rxaeq_to_val(rxaeq_mode);
+		if (port->rxaeq_mode == RXAEQ_MODE_MANUAL)
+			of_property_read_u32(child, "brcm,rxaeq-value",
+					     &port->rxaeq_val);
+
+		of_property_read_u32(child, "brcm,tx-amplitude-millivolt",
+				     &port->tx_amplitude_val);
+
+		port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
+		if (IS_ERR(port->phy)) {
+			dev_err(dev, "failed to create PHY\n");
+			ret = PTR_ERR(port->phy);
+			goto put_child;
+		}
+
+		phy_set_drvdata(port->phy, port);
+		count++;
+	}
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "could not register PHY provider\n");
+		return PTR_ERR(provider);
+	}
+
+	dev_info(dev, "registered %d port(s)\n", count);
+
+	return 0;
+put_child:
+	of_node_put(child);
+	return ret;
+}
+
+static struct platform_driver brcm_sata_phy_driver = {
+	.probe	= brcm_sata_phy_probe,
+	.driver	= {
+		.of_match_table	= brcm_sata_phy_of_match,
+		.name		= "brcm-sata-phy",
+	}
+};
+module_platform_driver(brcm_sata_phy_driver);
+
+MODULE_DESCRIPTION("Broadcom SATA PHY driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marc Carino");
+MODULE_AUTHOR("Brian Norris");
+MODULE_ALIAS("platform:phy-brcm-sata");