Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 2085 insertions, 0 deletions

diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig
new file mode 100644
index 000000000..18a3cc5b9
--- /dev/null
+++ b/drivers/phy/intel/Kconfig
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Phy drivers for Intel platforms
+#
+config PHY_INTEL_KEEMBAY_EMMC
+	tristate "Intel Keem Bay EMMC PHY driver"
+	depends on ARCH_KEEMBAY || COMPILE_TEST
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Choose this option if you have an Intel Keem Bay SoC.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called phy-keembay-emmc.ko.
+
+config PHY_INTEL_KEEMBAY_USB
+	tristate "Intel Keem Bay USB PHY driver"
+	depends on ARCH_KEEMBAY || COMPILE_TEST
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Choose this option if you have an Intel Keem Bay SoC.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called phy-keembay-usb.ko.
+
+config PHY_INTEL_LGM_COMBO
+	bool "Intel Lightning Mountain ComboPHY driver"
+	depends on X86 || COMPILE_TEST
+	depends on OF && HAS_IOMEM
+	select MFD_SYSCON
+	select GENERIC_PHY
+	select REGMAP
+	help
+	  Enable this to support Intel ComboPhy.
+
+	  This driver configures ComboPhy subsystem on Intel gateway
+	  chipsets which provides PHYs for various controllers, EMAC,
+	  SATA and PCIe.
+
+config PHY_INTEL_LGM_EMMC
+	tristate "Intel Lightning Mountain EMMC PHY driver"
+	depends on X86 || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable this to support the Intel EMMC PHY
+
+config PHY_INTEL_THUNDERBAY_EMMC
+        tristate "Intel Thunder Bay eMMC PHY driver"
+        depends on OF && (ARCH_THUNDERBAY || COMPILE_TEST)
+        select GENERIC_PHY
+        help
+	  This option enables support for Intel Thunder Bay SoC eMMC PHY.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called phy-intel-thunderbay-emmc.ko.
diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile
new file mode 100644
index 000000000..b7321d56b
--- /dev/null
+++ b/drivers/phy/intel/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_INTEL_KEEMBAY_EMMC)	+= phy-intel-keembay-emmc.o
+obj-$(CONFIG_PHY_INTEL_KEEMBAY_USB)	+= phy-intel-keembay-usb.o
+obj-$(CONFIG_PHY_INTEL_LGM_COMBO)	+= phy-intel-lgm-combo.o
+obj-$(CONFIG_PHY_INTEL_LGM_EMMC)	+= phy-intel-lgm-emmc.o
+obj-$(CONFIG_PHY_INTEL_THUNDERBAY_EMMC) += phy-intel-thunderbay-emmc.o
diff --git a/drivers/phy/intel/phy-intel-keembay-emmc.c b/drivers/phy/intel/phy-intel-keembay-emmc.c
new file mode 100644
index 000000000..0eb11ac7c
--- /dev/null
+++ b/drivers/phy/intel/phy-intel-keembay-emmc.c
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Keem Bay eMMC PHY driver
+ * Copyright (C) 2020 Intel Corporation
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* eMMC/SD/SDIO core/phy configuration registers */
+#define PHY_CFG_0		0x24
+#define  SEL_DLY_TXCLK_MASK	BIT(29)
+#define  OTAP_DLY_ENA_MASK	BIT(27)
+#define  OTAP_DLY_SEL_MASK	GENMASK(26, 23)
+#define  DLL_EN_MASK		BIT(10)
+#define  PWR_DOWN_MASK		BIT(0)
+
+#define PHY_CFG_2		0x2c
+#define  SEL_FREQ_MASK		GENMASK(12, 10)
+
+#define PHY_STAT		0x40
+#define  CAL_DONE_MASK		BIT(6)
+#define  IS_CALDONE(x)		((x) & CAL_DONE_MASK)
+#define  DLL_RDY_MASK		BIT(5)
+#define  IS_DLLRDY(x)		((x) & DLL_RDY_MASK)
+
+/* From ACS_eMMC51_16nFFC_RO1100_Userguide_v1p0.pdf p17 */
+#define FREQSEL_200M_170M	0x0
+#define FREQSEL_170M_140M	0x1
+#define FREQSEL_140M_110M	0x2
+#define FREQSEL_110M_80M	0x3
+#define FREQSEL_80M_50M		0x4
+
+struct keembay_emmc_phy {
+	struct regmap *syscfg;
+	struct clk *emmcclk;
+};
+
+static const struct regmap_config keembay_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static int keembay_emmc_phy_power(struct phy *phy, bool on_off)
+{
+	struct keembay_emmc_phy *priv = phy_get_drvdata(phy);
+	unsigned int caldone;
+	unsigned int dllrdy;
+	unsigned int freqsel;
+	unsigned int mhz;
+	int ret;
+
+	/*
+	 * Keep phyctrl_pdb and phyctrl_endll low to allow
+	 * initialization of CALIO state M/C DFFs
+	 */
+	ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, PWR_DOWN_MASK,
+				 FIELD_PREP(PWR_DOWN_MASK, 0));
+	if (ret) {
+		dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, DLL_EN_MASK,
+				 FIELD_PREP(DLL_EN_MASK, 0));
+	if (ret) {
+		dev_err(&phy->dev, "turn off the dll failed: %d\n", ret);
+		return ret;
+	}
+
+	/* Already finish power off above */
+	if (!on_off)
+		return 0;
+
+	mhz = DIV_ROUND_CLOSEST(clk_get_rate(priv->emmcclk), 1000000);
+	if (mhz <= 200 && mhz >= 170)
+		freqsel = FREQSEL_200M_170M;
+	else if (mhz <= 170 && mhz >= 140)
+		freqsel = FREQSEL_170M_140M;
+	else if (mhz <= 140 && mhz >= 110)
+		freqsel = FREQSEL_140M_110M;
+	else if (mhz <= 110 && mhz >= 80)
+		freqsel = FREQSEL_110M_80M;
+	else if (mhz <= 80 && mhz >= 50)
+		freqsel = FREQSEL_80M_50M;
+	else
+		freqsel = 0x0;
+
+	/* Check for EMMC clock rate*/
+	if (mhz > 175)
+		dev_warn(&phy->dev, "Unsupported rate: %d MHz\n", mhz);
+
+	/*
+	 * According to the user manual, calpad calibration
+	 * cycle takes more than 2us without the minimal recommended
+	 * value, so we may need a little margin here
+	 */
+	udelay(5);
+
+	ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, PWR_DOWN_MASK,
+				 FIELD_PREP(PWR_DOWN_MASK, 1));
+	if (ret) {
+		dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * According to the user manual, it asks driver to wait 5us for
+	 * calpad busy trimming. However it is documented that this value is
+	 * PVT(A.K.A. process, voltage and temperature) relevant, so some
+	 * failure cases are found which indicates we should be more tolerant
+	 * to calpad busy trimming.
+	 */
+	ret = regmap_read_poll_timeout(priv->syscfg, PHY_STAT,
+				       caldone, IS_CALDONE(caldone),
+				       0, 50);
+	if (ret) {
+		dev_err(&phy->dev, "caldone failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	/* Set the frequency of the DLL operation */
+	ret = regmap_update_bits(priv->syscfg, PHY_CFG_2, SEL_FREQ_MASK,
+				 FIELD_PREP(SEL_FREQ_MASK, freqsel));
+	if (ret) {
+		dev_err(&phy->dev, "set the frequency of dll failed:%d\n", ret);
+		return ret;
+	}
+
+	/* Turn on the DLL */
+	ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, DLL_EN_MASK,
+				 FIELD_PREP(DLL_EN_MASK, 1));
+	if (ret) {
+		dev_err(&phy->dev, "turn on the dll failed: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * We turned on the DLL even though the rate was 0 because we the
+	 * clock might be turned on later.  ...but we can't wait for the DLL
+	 * to lock when the rate is 0 because it will never lock with no
+	 * input clock.
+	 *
+	 * Technically we should be checking the lock later when the clock
+	 * is turned on, but for now we won't.
+	 */
+	if (mhz == 0)
+		return 0;
+
+	/*
+	 * After enabling analog DLL circuits docs say that we need 10.2 us if
+	 * our source clock is at 50 MHz and that lock time scales linearly
+	 * with clock speed. If we are powering on the PHY and the card clock
+	 * is super slow (like 100kHz) this could take as long as 5.1 ms as
+	 * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms
+	 * hopefully we won't be running at 100 kHz, but we should still make
+	 * sure we wait long enough.
+	 *
+	 * NOTE: There appear to be corner cases where the DLL seems to take
+	 * extra long to lock for reasons that aren't understood. In some
+	 * extreme cases we've seen it take up to over 10ms (!). We'll be
+	 * generous and give it 50ms.
+	 */
+	ret = regmap_read_poll_timeout(priv->syscfg, PHY_STAT,
+				       dllrdy, IS_DLLRDY(dllrdy),
+				       0, 50 * USEC_PER_MSEC);
+	if (ret)
+		dev_err(&phy->dev, "dllrdy failed, ret=%d\n", ret);
+
+	return ret;
+}
+
+static int keembay_emmc_phy_init(struct phy *phy)
+{
+	struct keembay_emmc_phy *priv = phy_get_drvdata(phy);
+
+	/*
+	 * We purposely get the clock here and not in probe to avoid the
+	 * circular dependency problem. We expect:
+	 * - PHY driver to probe
+	 * - SDHCI driver to start probe
+	 * - SDHCI driver to register it's clock
+	 * - SDHCI driver to get the PHY
+	 * - SDHCI driver to init the PHY
+	 *
+	 * The clock is optional, so upon any error just return it like
+	 * any other error to user.
+	 */
+	priv->emmcclk = clk_get_optional(&phy->dev, "emmcclk");
+
+	return PTR_ERR_OR_ZERO(priv->emmcclk);
+}
+
+static int keembay_emmc_phy_exit(struct phy *phy)
+{
+	struct keembay_emmc_phy *priv = phy_get_drvdata(phy);
+
+	clk_put(priv->emmcclk);
+
+	return 0;
+};
+
+static int keembay_emmc_phy_power_on(struct phy *phy)
+{
+	struct keembay_emmc_phy *priv = phy_get_drvdata(phy);
+	int ret;
+
+	/* Delay chain based txclk: enable */
+	ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
+				 FIELD_PREP(SEL_DLY_TXCLK_MASK, 1));
+	if (ret) {
+		dev_err(&phy->dev, "ERROR: delay chain txclk set: %d\n", ret);
+		return ret;
+	}
+
+	/* Output tap delay: enable */
+	ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, OTAP_DLY_ENA_MASK,
+				 FIELD_PREP(OTAP_DLY_ENA_MASK, 1));
+	if (ret) {
+		dev_err(&phy->dev, "ERROR: output tap delay set: %d\n", ret);
+		return ret;
+	}
+
+	/* Output tap delay */
+	ret = regmap_update_bits(priv->syscfg, PHY_CFG_0, OTAP_DLY_SEL_MASK,
+				 FIELD_PREP(OTAP_DLY_SEL_MASK, 2));
+	if (ret) {
+		dev_err(&phy->dev, "ERROR: output tap delay select: %d\n", ret);
+		return ret;
+	}
+
+	/* Power up eMMC phy analog blocks */
+	return keembay_emmc_phy_power(phy, true);
+}
+
+static int keembay_emmc_phy_power_off(struct phy *phy)
+{
+	/* Power down eMMC phy analog blocks */
+	return keembay_emmc_phy_power(phy, false);
+}
+
+static const struct phy_ops ops = {
+	.init		= keembay_emmc_phy_init,
+	.exit		= keembay_emmc_phy_exit,
+	.power_on	= keembay_emmc_phy_power_on,
+	.power_off	= keembay_emmc_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int keembay_emmc_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct keembay_emmc_phy *priv;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	void __iomem *base;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->syscfg = devm_regmap_init_mmio(dev, base, &keembay_regmap_config);
+	if (IS_ERR(priv->syscfg))
+		return PTR_ERR(priv->syscfg);
+
+	generic_phy = devm_phy_create(dev, np, &ops);
+	if (IS_ERR(generic_phy))
+		return dev_err_probe(dev, PTR_ERR(generic_phy),
+				     "failed to create PHY\n");
+
+	phy_set_drvdata(generic_phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id keembay_emmc_phy_dt_ids[] = {
+	{ .compatible = "intel,keembay-emmc-phy" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, keembay_emmc_phy_dt_ids);
+
+static struct platform_driver keembay_emmc_phy_driver = {
+	.probe		= keembay_emmc_phy_probe,
+	.driver		= {
+		.name	= "keembay-emmc-phy",
+		.of_match_table = keembay_emmc_phy_dt_ids,
+	},
+};
+module_platform_driver(keembay_emmc_phy_driver);
+
+MODULE_AUTHOR("Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>");
+MODULE_DESCRIPTION("Intel Keem Bay eMMC PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/intel/phy-intel-keembay-usb.c b/drivers/phy/intel/phy-intel-keembay-usb.c
new file mode 100644
index 000000000..c8b05f7b2
--- /dev/null
+++ b/drivers/phy/intel/phy-intel-keembay-usb.c
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Keem Bay USB PHY driver
+ * Copyright (C) 2020 Intel Corporation
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* USS (USB Subsystem) clock control registers */
+#define USS_CPR_CLK_EN		0x00
+#define USS_CPR_CLK_SET		0x04
+#define USS_CPR_CLK_CLR		0x08
+#define USS_CPR_RST_EN		0x10
+#define USS_CPR_RST_SET		0x14
+#define USS_CPR_RST_CLR		0x18
+
+/* USS clock/reset bit fields */
+#define USS_CPR_PHY_TST		BIT(6)
+#define USS_CPR_LOW_JIT		BIT(5)
+#define USS_CPR_CORE		BIT(4)
+#define USS_CPR_SUSPEND		BIT(3)
+#define USS_CPR_ALT_REF		BIT(2)
+#define USS_CPR_REF		BIT(1)
+#define USS_CPR_SYS		BIT(0)
+#define USS_CPR_MASK		GENMASK(6, 0)
+
+/* USS APB slave registers */
+#define USS_USB_CTRL_CFG0		0x10
+#define  VCC_RESET_N_MASK		BIT(31)
+
+#define USS_USB_PHY_CFG0		0x30
+#define  POR_MASK			BIT(15)
+#define  PHY_RESET_MASK			BIT(14)
+#define  PHY_REF_USE_PAD_MASK		BIT(5)
+
+#define USS_USB_PHY_CFG6		0x64
+#define  PHY0_SRAM_EXT_LD_DONE_MASK	BIT(23)
+
+#define USS_USB_PARALLEL_IF_CTRL	0xa0
+#define  USB_PHY_CR_PARA_SEL_MASK	BIT(2)
+
+#define USS_USB_TSET_SIGNALS_AND_GLOB	0xac
+#define  USB_PHY_CR_PARA_CLK_EN_MASK	BIT(7)
+
+#define USS_USB_STATUS_REG		0xb8
+#define  PHY0_SRAM_INIT_DONE_MASK	BIT(3)
+
+#define USS_USB_TIEOFFS_CONSTANTS_REG1	0xc0
+#define  IDDQ_ENABLE_MASK		BIT(10)
+
+struct keembay_usb_phy {
+	struct device *dev;
+	struct regmap *regmap_cpr;
+	struct regmap *regmap_slv;
+};
+
+static const struct regmap_config keembay_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = USS_USB_TIEOFFS_CONSTANTS_REG1,
+};
+
+static int keembay_usb_clocks_on(struct keembay_usb_phy *priv)
+{
+	int ret;
+
+	ret = regmap_update_bits(priv->regmap_cpr, USS_CPR_CLK_SET,
+				 USS_CPR_MASK, USS_CPR_MASK);
+	if (ret) {
+		dev_err(priv->dev, "error clock set: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_update_bits(priv->regmap_cpr, USS_CPR_RST_SET,
+				 USS_CPR_MASK, USS_CPR_MASK);
+	if (ret) {
+		dev_err(priv->dev, "error reset set: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_update_bits(priv->regmap_slv,
+				 USS_USB_TIEOFFS_CONSTANTS_REG1,
+				 IDDQ_ENABLE_MASK,
+				 FIELD_PREP(IDDQ_ENABLE_MASK, 0));
+	if (ret) {
+		dev_err(priv->dev, "error iddq disable: %d\n", ret);
+		return ret;
+	}
+
+	/* Wait 30us to ensure all analog blocks are powered up. */
+	usleep_range(30, 60);
+
+	ret = regmap_update_bits(priv->regmap_slv, USS_USB_PHY_CFG0,
+				 PHY_REF_USE_PAD_MASK,
+				 FIELD_PREP(PHY_REF_USE_PAD_MASK, 1));
+	if (ret)
+		dev_err(priv->dev, "error ref clock select: %d\n", ret);
+
+	return ret;
+}
+
+static int keembay_usb_core_off(struct keembay_usb_phy *priv)
+{
+	int ret;
+
+	ret = regmap_update_bits(priv->regmap_slv, USS_USB_CTRL_CFG0,
+				 VCC_RESET_N_MASK,
+				 FIELD_PREP(VCC_RESET_N_MASK, 0));
+	if (ret)
+		dev_err(priv->dev, "error core reset: %d\n", ret);
+
+	return ret;
+}
+
+static int keembay_usb_core_on(struct keembay_usb_phy *priv)
+{
+	int ret;
+
+	ret = regmap_update_bits(priv->regmap_slv, USS_USB_CTRL_CFG0,
+				 VCC_RESET_N_MASK,
+				 FIELD_PREP(VCC_RESET_N_MASK, 1));
+	if (ret)
+		dev_err(priv->dev, "error core on: %d\n", ret);
+
+	return ret;
+}
+
+static int keembay_usb_phys_on(struct keembay_usb_phy *priv)
+{
+	int ret;
+
+	ret = regmap_update_bits(priv->regmap_slv, USS_USB_PHY_CFG0,
+				 POR_MASK | PHY_RESET_MASK,
+				 FIELD_PREP(POR_MASK | PHY_RESET_MASK, 0));
+	if (ret)
+		dev_err(priv->dev, "error phys on: %d\n", ret);
+
+	return ret;
+}
+
+static int keembay_usb_phy_init(struct phy *phy)
+{
+	struct keembay_usb_phy *priv = phy_get_drvdata(phy);
+	u32 val;
+	int ret;
+
+	ret = keembay_usb_core_off(priv);
+	if (ret)
+		return ret;
+
+	/*
+	 * According to Keem Bay datasheet, wait minimum 20us after clock
+	 * enable before bringing PHYs out of reset.
+	 */
+	usleep_range(20, 40);
+
+	ret = keembay_usb_phys_on(priv);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(priv->regmap_slv,
+				 USS_USB_TSET_SIGNALS_AND_GLOB,
+				 USB_PHY_CR_PARA_CLK_EN_MASK,
+				 FIELD_PREP(USB_PHY_CR_PARA_CLK_EN_MASK, 0));
+	if (ret) {
+		dev_err(priv->dev, "error cr clock disable: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * According to Keem Bay datasheet, wait 2us after disabling the
+	 * clock into the USB 3.x parallel interface.
+	 */
+	udelay(2);
+
+	ret = regmap_update_bits(priv->regmap_slv,
+				 USS_USB_PARALLEL_IF_CTRL,
+				 USB_PHY_CR_PARA_SEL_MASK,
+				 FIELD_PREP(USB_PHY_CR_PARA_SEL_MASK, 1));
+	if (ret) {
+		dev_err(priv->dev, "error cr select: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_update_bits(priv->regmap_slv,
+				 USS_USB_TSET_SIGNALS_AND_GLOB,
+				 USB_PHY_CR_PARA_CLK_EN_MASK,
+				 FIELD_PREP(USB_PHY_CR_PARA_CLK_EN_MASK, 1));
+	if (ret) {
+		dev_err(priv->dev, "error cr clock enable: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read_poll_timeout(priv->regmap_slv, USS_USB_STATUS_REG,
+				       val, val & PHY0_SRAM_INIT_DONE_MASK,
+				       USEC_PER_MSEC, 10 * USEC_PER_MSEC);
+	if (ret) {
+		dev_err(priv->dev, "SRAM init not done: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_update_bits(priv->regmap_slv, USS_USB_PHY_CFG6,
+				 PHY0_SRAM_EXT_LD_DONE_MASK,
+				 FIELD_PREP(PHY0_SRAM_EXT_LD_DONE_MASK, 1));
+	if (ret) {
+		dev_err(priv->dev, "error SRAM init done set: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * According to Keem Bay datasheet, wait 20us after setting the
+	 * SRAM load done bit, before releasing the controller reset.
+	 */
+	usleep_range(20, 40);
+
+	return keembay_usb_core_on(priv);
+}
+
+static const struct phy_ops ops = {
+	.init		= keembay_usb_phy_init,
+	.owner		= THIS_MODULE,
+};
+
+static int keembay_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct keembay_usb_phy *priv;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	void __iomem *base;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource_byname(pdev, "cpr-apb-base");
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap_cpr = devm_regmap_init_mmio(dev, base,
+						 &keembay_regmap_config);
+	if (IS_ERR(priv->regmap_cpr))
+		return PTR_ERR(priv->regmap_cpr);
+
+	base = devm_platform_ioremap_resource_byname(pdev, "slv-apb-base");
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap_slv = devm_regmap_init_mmio(dev, base,
+						 &keembay_regmap_config);
+	if (IS_ERR(priv->regmap_slv))
+		return PTR_ERR(priv->regmap_slv);
+
+	generic_phy = devm_phy_create(dev, dev->of_node, &ops);
+	if (IS_ERR(generic_phy))
+		return dev_err_probe(dev, PTR_ERR(generic_phy),
+				     "failed to create PHY\n");
+
+	phy_set_drvdata(generic_phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return dev_err_probe(dev, PTR_ERR(phy_provider),
+				     "failed to register phy provider\n");
+
+	/* Setup USB subsystem clocks */
+	ret = keembay_usb_clocks_on(priv);
+	if (ret)
+		return ret;
+
+	/* and turn on the DWC3 core, prior to DWC3 driver init. */
+	return keembay_usb_core_on(priv);
+}
+
+static const struct of_device_id keembay_usb_phy_dt_ids[] = {
+	{ .compatible = "intel,keembay-usb-phy" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, keembay_usb_phy_dt_ids);
+
+static struct platform_driver keembay_usb_phy_driver = {
+	.probe		= keembay_usb_phy_probe,
+	.driver		= {
+		.name	= "keembay-usb-phy",
+		.of_match_table = keembay_usb_phy_dt_ids,
+	},
+};
+module_platform_driver(keembay_usb_phy_driver);
+
+MODULE_AUTHOR("Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>");
+MODULE_DESCRIPTION("Intel Keem Bay USB PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/intel/phy-intel-lgm-combo.c b/drivers/phy/intel/phy-intel-lgm-combo.c
new file mode 100644
index 000000000..6010e246d
--- /dev/null
+++ b/drivers/phy/intel/phy-intel-lgm-combo.c
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Combo-PHY driver
+ *
+ * Copyright (C) 2019-2020 Intel Corporation.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <dt-bindings/phy/phy.h>
+
+#define PCIE_PHY_GEN_CTRL	0x00
+#define PCIE_PHY_CLK_PAD	BIT(17)
+
+#define PAD_DIS_CFG		0x174
+
+#define PCS_XF_ATE_OVRD_IN_2	0x3008
+#define ADAPT_REQ_MSK		GENMASK(5, 4)
+
+#define PCS_XF_RX_ADAPT_ACK	0x3010
+#define RX_ADAPT_ACK_BIT	BIT(0)
+
+#define CR_ADDR(addr, lane)	(((addr) + (lane) * 0x100) << 2)
+#define REG_COMBO_MODE(x)	((x) * 0x200)
+#define REG_CLK_DISABLE(x)	((x) * 0x200 + 0x124)
+
+#define COMBO_PHY_ID(x)		((x)->parent->id)
+#define PHY_ID(x)		((x)->id)
+
+#define CLK_100MHZ		100000000
+#define CLK_156_25MHZ		156250000
+
+static const unsigned long intel_iphy_clk_rates[] = {
+	CLK_100MHZ, CLK_156_25MHZ, CLK_100MHZ,
+};
+
+enum {
+	PHY_0,
+	PHY_1,
+	PHY_MAX_NUM
+};
+
+/*
+ * Clock Register bit fields to enable clocks
+ * for ComboPhy according to the mode.
+ */
+enum intel_phy_mode {
+	PHY_PCIE_MODE = 0,
+	PHY_XPCS_MODE,
+	PHY_SATA_MODE,
+};
+
+/* ComboPhy mode Register values */
+enum intel_combo_mode {
+	PCIE0_PCIE1_MODE = 0,
+	PCIE_DL_MODE,
+	RXAUI_MODE,
+	XPCS0_XPCS1_MODE,
+	SATA0_SATA1_MODE,
+};
+
+enum aggregated_mode {
+	PHY_SL_MODE,
+	PHY_DL_MODE,
+};
+
+struct intel_combo_phy;
+
+struct intel_cbphy_iphy {
+	struct phy		*phy;
+	struct intel_combo_phy	*parent;
+	struct reset_control	*app_rst;
+	u32			id;
+};
+
+struct intel_combo_phy {
+	struct device		*dev;
+	struct clk		*core_clk;
+	unsigned long		clk_rate;
+	void __iomem		*app_base;
+	void __iomem		*cr_base;
+	struct regmap		*syscfg;
+	struct regmap		*hsiocfg;
+	u32			id;
+	u32			bid;
+	struct reset_control	*phy_rst;
+	struct reset_control	*core_rst;
+	struct intel_cbphy_iphy	iphy[PHY_MAX_NUM];
+	enum intel_phy_mode	phy_mode;
+	enum aggregated_mode	aggr_mode;
+	u32			init_cnt;
+	struct mutex		lock;
+};
+
+static int intel_cbphy_iphy_enable(struct intel_cbphy_iphy *iphy, bool set)
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	u32 mask = BIT(cbphy->phy_mode * 2 + iphy->id);
+	u32 val;
+
+	/* Register: 0 is enable, 1 is disable */
+	val = set ? 0 : mask;
+
+	return regmap_update_bits(cbphy->hsiocfg, REG_CLK_DISABLE(cbphy->bid),
+				  mask, val);
+}
+
+static int intel_cbphy_pcie_refclk_cfg(struct intel_cbphy_iphy *iphy, bool set)
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	u32 mask = BIT(cbphy->id * 2 + iphy->id);
+	u32 val;
+
+	/* Register: 0 is enable, 1 is disable */
+	val = set ? 0 : mask;
+
+	return regmap_update_bits(cbphy->syscfg, PAD_DIS_CFG, mask, val);
+}
+
+static inline void combo_phy_w32_off_mask(void __iomem *base, unsigned int reg,
+					  u32 mask, u32 val)
+{
+	u32 reg_val;
+
+	reg_val = readl(base + reg);
+	reg_val &= ~mask;
+	reg_val |= val;
+	writel(reg_val, base + reg);
+}
+
+static int intel_cbphy_iphy_cfg(struct intel_cbphy_iphy *iphy,
+				int (*phy_cfg)(struct intel_cbphy_iphy *))
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	int ret;
+
+	ret = phy_cfg(iphy);
+	if (ret)
+		return ret;
+
+	if (cbphy->aggr_mode != PHY_DL_MODE)
+		return 0;
+
+	return phy_cfg(&cbphy->iphy[PHY_1]);
+}
+
+static int intel_cbphy_pcie_en_pad_refclk(struct intel_cbphy_iphy *iphy)
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	int ret;
+
+	ret = intel_cbphy_pcie_refclk_cfg(iphy, true);
+	if (ret) {
+		dev_err(cbphy->dev, "Failed to enable PCIe pad refclk\n");
+		return ret;
+	}
+
+	if (cbphy->init_cnt)
+		return 0;
+
+	combo_phy_w32_off_mask(cbphy->app_base, PCIE_PHY_GEN_CTRL,
+			       PCIE_PHY_CLK_PAD, FIELD_PREP(PCIE_PHY_CLK_PAD, 0));
+
+	/* Delay for stable clock PLL */
+	usleep_range(50, 100);
+
+	return 0;
+}
+
+static int intel_cbphy_pcie_dis_pad_refclk(struct intel_cbphy_iphy *iphy)
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	int ret;
+
+	ret = intel_cbphy_pcie_refclk_cfg(iphy, false);
+	if (ret) {
+		dev_err(cbphy->dev, "Failed to disable PCIe pad refclk\n");
+		return ret;
+	}
+
+	if (cbphy->init_cnt)
+		return 0;
+
+	combo_phy_w32_off_mask(cbphy->app_base, PCIE_PHY_GEN_CTRL,
+			       PCIE_PHY_CLK_PAD, FIELD_PREP(PCIE_PHY_CLK_PAD, 1));
+
+	return 0;
+}
+
+static int intel_cbphy_set_mode(struct intel_combo_phy *cbphy)
+{
+	enum intel_combo_mode cb_mode;
+	enum aggregated_mode aggr = cbphy->aggr_mode;
+	struct device *dev = cbphy->dev;
+	enum intel_phy_mode mode;
+	int ret;
+
+	mode = cbphy->phy_mode;
+
+	switch (mode) {
+	case PHY_PCIE_MODE:
+		cb_mode = (aggr == PHY_DL_MODE) ? PCIE_DL_MODE : PCIE0_PCIE1_MODE;
+		break;
+
+	case PHY_XPCS_MODE:
+		cb_mode = (aggr == PHY_DL_MODE) ? RXAUI_MODE : XPCS0_XPCS1_MODE;
+		break;
+
+	case PHY_SATA_MODE:
+		if (aggr == PHY_DL_MODE) {
+			dev_err(dev, "Mode:%u not support dual lane!\n", mode);
+			return -EINVAL;
+		}
+
+		cb_mode = SATA0_SATA1_MODE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_write(cbphy->hsiocfg, REG_COMBO_MODE(cbphy->bid), cb_mode);
+	if (ret)
+		dev_err(dev, "Failed to set ComboPhy mode: %d\n", ret);
+
+	return ret;
+}
+
+static void intel_cbphy_rst_assert(struct intel_combo_phy *cbphy)
+{
+	reset_control_assert(cbphy->core_rst);
+	reset_control_assert(cbphy->phy_rst);
+}
+
+static void intel_cbphy_rst_deassert(struct intel_combo_phy *cbphy)
+{
+	reset_control_deassert(cbphy->core_rst);
+	reset_control_deassert(cbphy->phy_rst);
+	/* Delay to ensure reset process is done */
+	usleep_range(10, 20);
+}
+
+static int intel_cbphy_iphy_power_on(struct intel_cbphy_iphy *iphy)
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	int ret;
+
+	if (!cbphy->init_cnt) {
+		ret = clk_prepare_enable(cbphy->core_clk);
+		if (ret) {
+			dev_err(cbphy->dev, "Clock enable failed!\n");
+			return ret;
+		}
+
+		ret = clk_set_rate(cbphy->core_clk, cbphy->clk_rate);
+		if (ret) {
+			dev_err(cbphy->dev, "Clock freq set to %lu failed!\n",
+				cbphy->clk_rate);
+			goto clk_err;
+		}
+
+		intel_cbphy_rst_assert(cbphy);
+		intel_cbphy_rst_deassert(cbphy);
+		ret = intel_cbphy_set_mode(cbphy);
+		if (ret)
+			goto clk_err;
+	}
+
+	ret = intel_cbphy_iphy_enable(iphy, true);
+	if (ret) {
+		dev_err(cbphy->dev, "Failed enabling PHY core\n");
+		goto clk_err;
+	}
+
+	ret = reset_control_deassert(iphy->app_rst);
+	if (ret) {
+		dev_err(cbphy->dev, "PHY(%u:%u) reset deassert failed!\n",
+			COMBO_PHY_ID(iphy), PHY_ID(iphy));
+		goto clk_err;
+	}
+
+	/* Delay to ensure reset process is done */
+	udelay(1);
+
+	return 0;
+
+clk_err:
+	clk_disable_unprepare(cbphy->core_clk);
+
+	return ret;
+}
+
+static int intel_cbphy_iphy_power_off(struct intel_cbphy_iphy *iphy)
+{
+	struct intel_combo_phy *cbphy = iphy->parent;
+	int ret;
+
+	ret = reset_control_assert(iphy->app_rst);
+	if (ret) {
+		dev_err(cbphy->dev, "PHY(%u:%u) reset assert failed!\n",
+			COMBO_PHY_ID(iphy), PHY_ID(iphy));
+		return ret;
+	}
+
+	ret = intel_cbphy_iphy_enable(iphy, false);
+	if (ret) {
+		dev_err(cbphy->dev, "Failed disabling PHY core\n");
+		return ret;
+	}
+
+	if (cbphy->init_cnt)
+		return 0;
+
+	clk_disable_unprepare(cbphy->core_clk);
+	intel_cbphy_rst_assert(cbphy);
+
+	return 0;
+}
+
+static int intel_cbphy_init(struct phy *phy)
+{
+	struct intel_cbphy_iphy *iphy = phy_get_drvdata(phy);
+	struct intel_combo_phy *cbphy = iphy->parent;
+	int ret;
+
+	mutex_lock(&cbphy->lock);
+	ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_iphy_power_on);
+	if (ret)
+		goto err;
+
+	if (cbphy->phy_mode == PHY_PCIE_MODE) {
+		ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_pcie_en_pad_refclk);
+		if (ret)
+			goto err;
+	}
+
+	cbphy->init_cnt++;
+
+err:
+	mutex_unlock(&cbphy->lock);
+
+	return ret;
+}
+
+static int intel_cbphy_exit(struct phy *phy)
+{
+	struct intel_cbphy_iphy *iphy = phy_get_drvdata(phy);
+	struct intel_combo_phy *cbphy = iphy->parent;
+	int ret;
+
+	mutex_lock(&cbphy->lock);
+	cbphy->init_cnt--;
+	if (cbphy->phy_mode == PHY_PCIE_MODE) {
+		ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_pcie_dis_pad_refclk);
+		if (ret)
+			goto err;
+	}
+
+	ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_iphy_power_off);
+
+err:
+	mutex_unlock(&cbphy->lock);
+
+	return ret;
+}
+
+static int intel_cbphy_calibrate(struct phy *phy)
+{
+	struct intel_cbphy_iphy *iphy = phy_get_drvdata(phy);
+	struct intel_combo_phy *cbphy = iphy->parent;
+	void __iomem *cr_base = cbphy->cr_base;
+	int val, ret, id;
+
+	if (cbphy->phy_mode != PHY_XPCS_MODE)
+		return 0;
+
+	id = PHY_ID(iphy);
+
+	/* trigger auto RX adaptation */
+	combo_phy_w32_off_mask(cr_base, CR_ADDR(PCS_XF_ATE_OVRD_IN_2, id),
+			       ADAPT_REQ_MSK, FIELD_PREP(ADAPT_REQ_MSK, 3));
+	/* Wait RX adaptation to finish */
+	ret = readl_poll_timeout(cr_base + CR_ADDR(PCS_XF_RX_ADAPT_ACK, id),
+				 val, val & RX_ADAPT_ACK_BIT, 10, 5000);
+	if (ret)
+		dev_err(cbphy->dev, "RX Adaptation failed!\n");
+	else
+		dev_dbg(cbphy->dev, "RX Adaptation success!\n");
+
+	/* Stop RX adaptation */
+	combo_phy_w32_off_mask(cr_base, CR_ADDR(PCS_XF_ATE_OVRD_IN_2, id),
+			       ADAPT_REQ_MSK, FIELD_PREP(ADAPT_REQ_MSK, 0));
+
+	return ret;
+}
+
+static int intel_cbphy_fwnode_parse(struct intel_combo_phy *cbphy)
+{
+	struct device *dev = cbphy->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+	struct fwnode_reference_args ref;
+	int ret;
+	u32 val;
+
+	cbphy->core_clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(cbphy->core_clk))
+		return dev_err_probe(dev, PTR_ERR(cbphy->core_clk),
+				     "Get clk failed!\n");
+
+	cbphy->core_rst = devm_reset_control_get_optional(dev, "core");
+	if (IS_ERR(cbphy->core_rst))
+		return dev_err_probe(dev, PTR_ERR(cbphy->core_rst),
+				     "Get core reset control err!\n");
+
+	cbphy->phy_rst = devm_reset_control_get_optional(dev, "phy");
+	if (IS_ERR(cbphy->phy_rst))
+		return dev_err_probe(dev, PTR_ERR(cbphy->phy_rst),
+				     "Get PHY reset control err!\n");
+
+	cbphy->iphy[0].app_rst = devm_reset_control_get_optional(dev, "iphy0");
+	if (IS_ERR(cbphy->iphy[0].app_rst))
+		return dev_err_probe(dev, PTR_ERR(cbphy->iphy[0].app_rst),
+				     "Get phy0 reset control err!\n");
+
+	cbphy->iphy[1].app_rst = devm_reset_control_get_optional(dev, "iphy1");
+	if (IS_ERR(cbphy->iphy[1].app_rst))
+		return dev_err_probe(dev, PTR_ERR(cbphy->iphy[1].app_rst),
+				     "Get phy1 reset control err!\n");
+
+	cbphy->app_base = devm_platform_ioremap_resource_byname(pdev, "app");
+	if (IS_ERR(cbphy->app_base))
+		return PTR_ERR(cbphy->app_base);
+
+	cbphy->cr_base = devm_platform_ioremap_resource_byname(pdev, "core");
+	if (IS_ERR(cbphy->cr_base))
+		return PTR_ERR(cbphy->cr_base);
+
+	/*
+	 * syscfg and hsiocfg variables stores the handle of the registers set
+	 * in which ComboPhy subsystem specific registers are subset. Using
+	 * Register map framework to access the registers set.
+	 */
+	ret = fwnode_property_get_reference_args(fwnode, "intel,syscfg", NULL,
+						 1, 0, &ref);
+	if (ret < 0)
+		return ret;
+
+	cbphy->id = ref.args[0];
+	cbphy->syscfg = device_node_to_regmap(to_of_node(ref.fwnode));
+	fwnode_handle_put(ref.fwnode);
+
+	ret = fwnode_property_get_reference_args(fwnode, "intel,hsio", NULL, 1,
+						 0, &ref);
+	if (ret < 0)
+		return ret;
+
+	cbphy->bid = ref.args[0];
+	cbphy->hsiocfg = device_node_to_regmap(to_of_node(ref.fwnode));
+	fwnode_handle_put(ref.fwnode);
+
+	ret = fwnode_property_read_u32_array(fwnode, "intel,phy-mode", &val, 1);
+	if (ret)
+		return ret;
+
+	switch (val) {
+	case PHY_TYPE_PCIE:
+		cbphy->phy_mode = PHY_PCIE_MODE;
+		break;
+
+	case PHY_TYPE_SATA:
+		cbphy->phy_mode = PHY_SATA_MODE;
+		break;
+
+	case PHY_TYPE_XPCS:
+		cbphy->phy_mode = PHY_XPCS_MODE;
+		break;
+
+	default:
+		dev_err(dev, "Invalid PHY mode: %u\n", val);
+		return -EINVAL;
+	}
+
+	cbphy->clk_rate = intel_iphy_clk_rates[cbphy->phy_mode];
+
+	if (fwnode_property_present(fwnode, "intel,aggregation"))
+		cbphy->aggr_mode = PHY_DL_MODE;
+	else
+		cbphy->aggr_mode = PHY_SL_MODE;
+
+	return 0;
+}
+
+static const struct phy_ops intel_cbphy_ops = {
+	.init		= intel_cbphy_init,
+	.exit		= intel_cbphy_exit,
+	.calibrate	= intel_cbphy_calibrate,
+	.owner		= THIS_MODULE,
+};
+
+static struct phy *intel_cbphy_xlate(struct device *dev,
+				     struct of_phandle_args *args)
+{
+	struct intel_combo_phy *cbphy = dev_get_drvdata(dev);
+	u32 iphy_id;
+
+	if (args->args_count < 1) {
+		dev_err(dev, "Invalid number of arguments\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	iphy_id = args->args[0];
+	if (iphy_id >= PHY_MAX_NUM) {
+		dev_err(dev, "Invalid phy instance %d\n", iphy_id);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (cbphy->aggr_mode == PHY_DL_MODE && iphy_id == PHY_1) {
+		dev_err(dev, "Invalid. ComboPhy is in Dual lane mode %d\n", iphy_id);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return cbphy->iphy[iphy_id].phy;
+}
+
+static int intel_cbphy_create(struct intel_combo_phy *cbphy)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = cbphy->dev;
+	struct intel_cbphy_iphy *iphy;
+	int i;
+
+	for (i = 0; i < PHY_MAX_NUM; i++) {
+		iphy = &cbphy->iphy[i];
+		iphy->parent = cbphy;
+		iphy->id = i;
+
+		/* In dual lane mode skip phy creation for the second phy */
+		if (cbphy->aggr_mode == PHY_DL_MODE && iphy->id == PHY_1)
+			continue;
+
+		iphy->phy = devm_phy_create(dev, NULL, &intel_cbphy_ops);
+		if (IS_ERR(iphy->phy)) {
+			dev_err(dev, "PHY[%u:%u]: create PHY instance failed!\n",
+				COMBO_PHY_ID(iphy), PHY_ID(iphy));
+
+			return PTR_ERR(iphy->phy);
+		}
+
+		phy_set_drvdata(iphy->phy, iphy);
+	}
+
+	dev_set_drvdata(dev, cbphy);
+	phy_provider = devm_of_phy_provider_register(dev, intel_cbphy_xlate);
+	if (IS_ERR(phy_provider))
+		dev_err(dev, "Register PHY provider failed!\n");
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int intel_cbphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct intel_combo_phy *cbphy;
+	int ret;
+
+	cbphy = devm_kzalloc(dev, sizeof(*cbphy), GFP_KERNEL);
+	if (!cbphy)
+		return -ENOMEM;
+
+	cbphy->dev = dev;
+	cbphy->init_cnt = 0;
+	mutex_init(&cbphy->lock);
+	ret = intel_cbphy_fwnode_parse(cbphy);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, cbphy);
+
+	return intel_cbphy_create(cbphy);
+}
+
+static int intel_cbphy_remove(struct platform_device *pdev)
+{
+	struct intel_combo_phy *cbphy = platform_get_drvdata(pdev);
+
+	intel_cbphy_rst_assert(cbphy);
+	clk_disable_unprepare(cbphy->core_clk);
+	return 0;
+}
+
+static const struct of_device_id of_intel_cbphy_match[] = {
+	{ .compatible = "intel,combo-phy" },
+	{ .compatible = "intel,combophy-lgm" },
+	{}
+};
+
+static struct platform_driver intel_cbphy_driver = {
+	.probe = intel_cbphy_probe,
+	.remove = intel_cbphy_remove,
+	.driver = {
+		.name = "intel-combo-phy",
+		.of_match_table = of_intel_cbphy_match,
+	}
+};
+
+module_platform_driver(intel_cbphy_driver);
+
+MODULE_DESCRIPTION("Intel Combo-phy driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/intel/phy-intel-lgm-emmc.c b/drivers/phy/intel/phy-intel-lgm-emmc.c
new file mode 100644
index 000000000..703aeb122
--- /dev/null
+++ b/drivers/phy/intel/phy-intel-lgm-emmc.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel eMMC PHY driver
+ * Copyright (C) 2019 Intel, Corp.
+ */
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* eMMC phy register definitions */
+#define EMMC_PHYCTRL0_REG	0xa8
+#define DR_TY_MASK		GENMASK(30, 28)
+#define DR_TY_SHIFT(x)		(((x) << 28) & DR_TY_MASK)
+#define OTAPDLYENA		BIT(14)
+#define OTAPDLYSEL_MASK		GENMASK(13, 10)
+#define OTAPDLYSEL_SHIFT(x)	(((x) << 10) & OTAPDLYSEL_MASK)
+
+#define EMMC_PHYCTRL1_REG	0xac
+#define PDB_MASK		BIT(0)
+#define PDB_SHIFT(x)		(((x) << 0) & PDB_MASK)
+#define ENDLL_MASK		BIT(7)
+#define ENDLL_SHIFT(x)		(((x) << 7) & ENDLL_MASK)
+
+#define EMMC_PHYCTRL2_REG	0xb0
+#define FRQSEL_25M		0
+#define FRQSEL_50M		1
+#define FRQSEL_100M		2
+#define FRQSEL_150M		3
+#define FRQSEL_MASK		GENMASK(24, 22)
+#define FRQSEL_SHIFT(x)		(((x) << 22) & FRQSEL_MASK)
+
+#define EMMC_PHYSTAT_REG	0xbc
+#define CALDONE_MASK		BIT(9)
+#define DLLRDY_MASK		BIT(8)
+#define IS_CALDONE(x)	((x) & CALDONE_MASK)
+#define IS_DLLRDY(x)	((x) & DLLRDY_MASK)
+
+struct intel_emmc_phy {
+	struct regmap *syscfg;
+	struct clk *emmcclk;
+};
+
+static int intel_emmc_phy_power(struct phy *phy, bool on_off)
+{
+	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
+	unsigned int caldone;
+	unsigned int dllrdy;
+	unsigned int freqsel;
+	unsigned long rate;
+	int ret, quot;
+
+	/*
+	 * Keep phyctrl_pdb and phyctrl_endll low to allow
+	 * initialization of CALIO state M/C DFFs
+	 */
+	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, PDB_MASK,
+				 PDB_SHIFT(0));
+	if (ret) {
+		dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret);
+		return ret;
+	}
+
+	/* Already finish power_off above */
+	if (!on_off)
+		return 0;
+
+	rate = clk_get_rate(priv->emmcclk);
+	quot = DIV_ROUND_CLOSEST(rate, 50000000);
+	if (quot > FRQSEL_150M)
+		dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate);
+	freqsel = clamp_t(int, quot, FRQSEL_25M, FRQSEL_150M);
+
+	/*
+	 * According to the user manual, calpad calibration
+	 * cycle takes more than 2us without the minimal recommended
+	 * value, so we may need a little margin here
+	 */
+	udelay(5);
+
+	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, PDB_MASK,
+				 PDB_SHIFT(1));
+	if (ret) {
+		dev_err(&phy->dev, "CALIO power down bar failed: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * According to the user manual, it asks driver to wait 5us for
+	 * calpad busy trimming. However it is documented that this value is
+	 * PVT(A.K.A process,voltage and temperature) relevant, so some
+	 * failure cases are found which indicates we should be more tolerant
+	 * to calpad busy trimming.
+	 */
+	ret = regmap_read_poll_timeout(priv->syscfg, EMMC_PHYSTAT_REG,
+				       caldone, IS_CALDONE(caldone),
+				       0, 50);
+	if (ret) {
+		dev_err(&phy->dev, "caldone failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	/* Set the frequency of the DLL operation */
+	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL2_REG, FRQSEL_MASK,
+				 FRQSEL_SHIFT(freqsel));
+	if (ret) {
+		dev_err(&phy->dev, "set the frequency of dll failed:%d\n", ret);
+		return ret;
+	}
+
+	/* Turn on the DLL */
+	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL1_REG, ENDLL_MASK,
+				 ENDLL_SHIFT(1));
+	if (ret) {
+		dev_err(&phy->dev, "turn on the dll failed: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * After enabling analog DLL circuits docs say that we need 10.2 us if
+	 * our source clock is at 50 MHz and that lock time scales linearly
+	 * with clock speed.  If we are powering on the PHY and the card clock
+	 * is super slow (like 100 kHZ) this could take as long as 5.1 ms as
+	 * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms
+	 * Hopefully we won't be running at 100 kHz, but we should still make
+	 * sure we wait long enough.
+	 *
+	 * NOTE: There appear to be corner cases where the DLL seems to take
+	 * extra long to lock for reasons that aren't understood.  In some
+	 * extreme cases we've seen it take up to over 10ms (!).  We'll be
+	 * generous and give it 50ms.
+	 */
+	ret = regmap_read_poll_timeout(priv->syscfg,
+				       EMMC_PHYSTAT_REG,
+				       dllrdy, IS_DLLRDY(dllrdy),
+				       0, 50 * USEC_PER_MSEC);
+	if (ret) {
+		dev_err(&phy->dev, "dllrdy failed. ret=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int intel_emmc_phy_init(struct phy *phy)
+{
+	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
+
+	/*
+	 * We purposely get the clock here and not in probe to avoid the
+	 * circular dependency problem. We expect:
+	 * - PHY driver to probe
+	 * - SDHCI driver to start probe
+	 * - SDHCI driver to register it's clock
+	 * - SDHCI driver to get the PHY
+	 * - SDHCI driver to init the PHY
+	 *
+	 * The clock is optional, so upon any error just return it like
+	 * any other error to user.
+	 *
+	 */
+	priv->emmcclk = clk_get_optional(&phy->dev, "emmcclk");
+	if (IS_ERR(priv->emmcclk)) {
+		dev_err(&phy->dev, "ERROR: getting emmcclk\n");
+		return PTR_ERR(priv->emmcclk);
+	}
+
+	return 0;
+}
+
+static int intel_emmc_phy_exit(struct phy *phy)
+{
+	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
+
+	clk_put(priv->emmcclk);
+
+	return 0;
+}
+
+static int intel_emmc_phy_power_on(struct phy *phy)
+{
+	struct intel_emmc_phy *priv = phy_get_drvdata(phy);
+	int ret;
+
+	/* Drive impedance: 50 Ohm */
+	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG, DR_TY_MASK,
+				 DR_TY_SHIFT(6));
+	if (ret) {
+		dev_err(&phy->dev, "ERROR set drive-impednce-50ohm: %d\n", ret);
+		return ret;
+	}
+
+	/* Output tap delay: disable */
+	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG, OTAPDLYENA,
+				 0);
+	if (ret) {
+		dev_err(&phy->dev, "ERROR Set output tap delay : %d\n", ret);
+		return ret;
+	}
+
+	/* Output tap delay */
+	ret = regmap_update_bits(priv->syscfg, EMMC_PHYCTRL0_REG,
+				 OTAPDLYSEL_MASK, OTAPDLYSEL_SHIFT(4));
+	if (ret) {
+		dev_err(&phy->dev, "ERROR: output tap dly select: %d\n", ret);
+		return ret;
+	}
+
+	/* Power up eMMC phy analog blocks */
+	return intel_emmc_phy_power(phy, true);
+}
+
+static int intel_emmc_phy_power_off(struct phy *phy)
+{
+	/* Power down eMMC phy analog blocks */
+	return intel_emmc_phy_power(phy, false);
+}
+
+static const struct phy_ops ops = {
+	.init		= intel_emmc_phy_init,
+	.exit		= intel_emmc_phy_exit,
+	.power_on	= intel_emmc_phy_power_on,
+	.power_off	= intel_emmc_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int intel_emmc_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct intel_emmc_phy *priv;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* Get eMMC phy (accessed via chiptop) regmap */
+	priv->syscfg = syscon_regmap_lookup_by_phandle(np, "intel,syscon");
+	if (IS_ERR(priv->syscfg)) {
+		dev_err(dev, "failed to find syscon\n");
+		return PTR_ERR(priv->syscfg);
+	}
+
+	generic_phy = devm_phy_create(dev, np, &ops);
+	if (IS_ERR(generic_phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(generic_phy);
+	}
+
+	phy_set_drvdata(generic_phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id intel_emmc_phy_dt_ids[] = {
+	{ .compatible = "intel,lgm-emmc-phy" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, intel_emmc_phy_dt_ids);
+
+static struct platform_driver intel_emmc_driver = {
+	.probe		= intel_emmc_phy_probe,
+	.driver		= {
+		.name	= "intel-emmc-phy",
+		.of_match_table = intel_emmc_phy_dt_ids,
+	},
+};
+
+module_platform_driver(intel_emmc_driver);
+
+MODULE_AUTHOR("Peter Harliman Liem <peter.harliman.liem@intel.com>");
+MODULE_DESCRIPTION("Intel eMMC PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/intel/phy-intel-thunderbay-emmc.c b/drivers/phy/intel/phy-intel-thunderbay-emmc.c
new file mode 100644
index 000000000..593f6970b
--- /dev/null
+++ b/drivers/phy/intel/phy-intel-thunderbay-emmc.c
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel ThunderBay eMMC PHY driver
+ *
+ * Copyright (C) 2021 Intel Corporation
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* eMMC/SD/SDIO core/phy configuration registers */
+#define CTRL_CFG_0	0x00
+#define CTRL_CFG_1	0x04
+#define CTRL_PRESET_0	0x08
+#define CTRL_PRESET_1	0x0c
+#define CTRL_PRESET_2	0x10
+#define CTRL_PRESET_3	0x14
+#define CTRL_PRESET_4	0x18
+#define CTRL_CFG_2	0x1c
+#define CTRL_CFG_3	0x20
+#define PHY_CFG_0	0x24
+#define PHY_CFG_1	0x28
+#define PHY_CFG_2	0x2c
+#define PHYBIST_CTRL	0x30
+#define SDHC_STAT3	0x34
+#define PHY_STAT	0x38
+#define PHYBIST_STAT_0	0x3c
+#define PHYBIST_STAT_1	0x40
+#define EMMC_AXI        0x44
+
+/* CTRL_PRESET_3 */
+#define CTRL_PRESET3_MASK	GENMASK(31, 0)
+#define CTRL_PRESET3_SHIFT	0
+
+/* CTRL_CFG_0 bit fields */
+#define SUPPORT_HS_MASK		BIT(26)
+#define SUPPORT_HS_SHIFT	26
+
+#define SUPPORT_8B_MASK		BIT(24)
+#define SUPPORT_8B_SHIFT	24
+
+/* CTRL_CFG_1 bit fields */
+#define SUPPORT_SDR50_MASK	BIT(28)
+#define SUPPORT_SDR50_SHIFT	28
+#define SLOT_TYPE_MASK		GENMASK(27, 26)
+#define SLOT_TYPE_OFFSET	26
+#define SUPPORT_64B_MASK	BIT(24)
+#define SUPPORT_64B_SHIFT	24
+#define SUPPORT_HS400_MASK	BIT(2)
+#define SUPPORT_HS400_SHIFT	2
+#define SUPPORT_DDR50_MASK	BIT(1)
+#define SUPPORT_DDR50_SHIFT	1
+#define SUPPORT_SDR104_MASK	BIT(0)
+#define SUPPORT_SDR104_SHIFT	0
+
+/* PHY_CFG_0 bit fields */
+#define SEL_DLY_TXCLK_MASK      BIT(29)
+#define SEL_DLY_TXCLK_SHIFT	29
+#define SEL_DLY_RXCLK_MASK      BIT(28)
+#define SEL_DLY_RXCLK_SHIFT	28
+
+#define OTAP_DLY_ENA_MASK	BIT(27)
+#define OTAP_DLY_ENA_SHIFT	27
+#define OTAP_DLY_SEL_MASK	GENMASK(26, 23)
+#define OTAP_DLY_SEL_SHIFT	23
+#define ITAP_CHG_WIN_MASK	BIT(22)
+#define ITAP_CHG_WIN_SHIFT	22
+#define ITAP_DLY_ENA_MASK	BIT(21)
+#define ITAP_DLY_ENA_SHIFT	21
+#define ITAP_DLY_SEL_MASK	GENMASK(20, 16)
+#define ITAP_DLY_SEL_SHIFT	16
+#define RET_ENB_MASK		BIT(15)
+#define RET_ENB_SHIFT		15
+#define RET_EN_MASK		BIT(14)
+#define RET_EN_SHIFT		14
+#define DLL_IFF_MASK		GENMASK(13, 11)
+#define DLL_IFF_SHIFT		11
+#define DLL_EN_MASK		BIT(10)
+#define DLL_EN_SHIFT		10
+#define DLL_TRIM_ICP_MASK	GENMASK(9, 6)
+#define DLL_TRIM_ICP_SHIFT	6
+#define RETRIM_EN_MASK		BIT(5)
+#define RETRIM_EN_SHIFT		5
+#define RETRIM_MASK		BIT(4)
+#define RETRIM_SHIFT		4
+#define DR_TY_MASK		GENMASK(3, 1)
+#define DR_TY_SHIFT		1
+#define PWR_DOWN_MASK		BIT(0)
+#define PWR_DOWN_SHIFT		0
+
+/* PHY_CFG_1 bit fields */
+#define REN_DAT_MASK		GENMASK(19, 12)
+#define REN_DAT_SHIFT		12
+#define REN_CMD_MASK		BIT(11)
+#define REN_CMD_SHIFT		11
+#define REN_STRB_MASK		BIT(10)
+#define REN_STRB_SHIFT		10
+#define PU_STRB_MASK		BIT(20)
+#define PU_STRB_SHIFT		20
+
+/* PHY_CFG_2 bit fields */
+#define CLKBUF_MASK		GENMASK(24, 21)
+#define CLKBUF_SHIFT		21
+#define SEL_STRB_MASK		GENMASK(20, 13)
+#define SEL_STRB_SHIFT		13
+#define SEL_FREQ_MASK		GENMASK(12, 10)
+#define SEL_FREQ_SHIFT		10
+
+/* PHY_STAT bit fields */
+#define CAL_DONE		BIT(6)
+#define DLL_RDY			BIT(5)
+
+#define OTAP_DLY		0x0
+#define ITAP_DLY		0x0
+#define STRB			0x33
+
+/* From ACS_eMMC51_16nFFC_RO1100_Userguide_v1p0.pdf p17 */
+#define FREQSEL_200M_170M	0x0
+#define FREQSEL_170M_140M	0x1
+#define FREQSEL_140M_110M	0x2
+#define FREQSEL_110M_80M	0x3
+#define FREQSEL_80M_50M		0x4
+#define FREQSEL_275M_250M	0x5
+#define FREQSEL_250M_225M	0x6
+#define FREQSEL_225M_200M	0x7
+
+/* Phy power status */
+#define PHY_UNINITIALIZED	0
+#define PHY_INITIALIZED		1
+
+/*
+ * During init(400KHz) phy_settings will be called with 200MHZ clock
+ * To avoid incorrectly setting the phy for init(400KHZ) "phy_power_sts" is used.
+ * When actual clock is set always phy is powered off once and then powered on.
+ * (sdhci_arasan_set_clock). That feature will be used to identify whether the
+ * settings are for init phy_power_on or actual clock phy_power_on
+ * 0 --> init settings
+ * 1 --> actual settings
+ */
+
+struct thunderbay_emmc_phy {
+	void __iomem    *reg_base;
+	struct clk      *emmcclk;
+	int phy_power_sts;
+};
+
+static inline void update_reg(struct thunderbay_emmc_phy *tbh_phy, u32 offset,
+			      u32 mask, u32 shift, u32 val)
+{
+	u32 tmp;
+
+	tmp = readl(tbh_phy->reg_base + offset);
+	tmp &= ~mask;
+	tmp |= val << shift;
+	writel(tmp, tbh_phy->reg_base + offset);
+}
+
+static int thunderbay_emmc_phy_power(struct phy *phy, bool power_on)
+{
+	struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
+	unsigned int freqsel = FREQSEL_200M_170M;
+	unsigned long rate;
+	static int lock;
+	u32 val;
+	int ret;
+
+	/* Disable DLL */
+	rate = clk_get_rate(tbh_phy->emmcclk);
+	switch (rate) {
+	case 200000000:
+		/* lock dll only when it is used, i.e only if SEL_DLY_TXCLK/RXCLK are 0 */
+		update_reg(tbh_phy, PHY_CFG_0, DLL_EN_MASK, DLL_EN_SHIFT, 0x0);
+		break;
+
+	/* dll lock not required for other frequencies */
+	case 50000000 ... 52000000:
+	case 400000:
+	default:
+		break;
+	}
+
+	if (!power_on)
+		return 0;
+
+	rate = clk_get_rate(tbh_phy->emmcclk);
+	switch (rate) {
+	case 170000001 ... 200000000:
+		freqsel = FREQSEL_200M_170M;
+		break;
+
+	case 140000001 ... 170000000:
+		freqsel = FREQSEL_170M_140M;
+		break;
+
+	case 110000001 ... 140000000:
+		freqsel = FREQSEL_140M_110M;
+		break;
+
+	case 80000001 ... 110000000:
+		freqsel = FREQSEL_110M_80M;
+		break;
+
+	case 50000000 ... 80000000:
+		freqsel = FREQSEL_80M_50M;
+		break;
+
+	case 250000001 ... 275000000:
+		freqsel = FREQSEL_275M_250M;
+		break;
+
+	case 225000001 ... 250000000:
+		freqsel = FREQSEL_250M_225M;
+		break;
+
+	case 200000001 ... 225000000:
+		freqsel = FREQSEL_225M_200M;
+		break;
+	default:
+		break;
+	}
+	/* Clock rate is checked against upper limit. It may fall low during init */
+	if (rate > 200000000)
+		dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate);
+
+	udelay(5);
+
+	if (lock == 0) {
+		/* PDB will be done only once per boot */
+		update_reg(tbh_phy, PHY_CFG_0, PWR_DOWN_MASK,
+			   PWR_DOWN_SHIFT, 0x1);
+		lock = 1;
+		/*
+		 * According to the user manual, it asks driver to wait 5us for
+		 * calpad busy trimming. However it is documented that this value is
+		 * PVT(A.K.A. process, voltage and temperature) relevant, so some
+		 * failure cases are found which indicates we should be more tolerant
+		 * to calpad busy trimming.
+		 */
+		ret = readl_poll_timeout(tbh_phy->reg_base + PHY_STAT,
+					 val, (val & CAL_DONE), 10, 50);
+		if (ret) {
+			dev_err(&phy->dev, "caldone failed, ret=%d\n", ret);
+			return ret;
+		}
+	}
+	rate = clk_get_rate(tbh_phy->emmcclk);
+	switch (rate) {
+	case 200000000:
+		/* Set frequency of the DLL operation */
+		update_reg(tbh_phy, PHY_CFG_2, SEL_FREQ_MASK, SEL_FREQ_SHIFT, freqsel);
+
+		/* Enable DLL */
+		update_reg(tbh_phy, PHY_CFG_0, DLL_EN_MASK, DLL_EN_SHIFT, 0x1);
+
+		/*
+		 * After enabling analog DLL circuits docs say that we need 10.2 us if
+		 * our source clock is at 50 MHz and that lock time scales linearly
+		 * with clock speed. If we are powering on the PHY and the card clock
+		 * is super slow (like 100kHz) this could take as long as 5.1 ms as
+		 * per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms
+		 * hopefully we won't be running at 100 kHz, but we should still make
+		 * sure we wait long enough.
+		 *
+		 * NOTE: There appear to be corner cases where the DLL seems to take
+		 * extra long to lock for reasons that aren't understood. In some
+		 * extreme cases we've seen it take up to over 10ms (!). We'll be
+		 * generous and give it 50ms.
+		 */
+		ret = readl_poll_timeout(tbh_phy->reg_base + PHY_STAT,
+					 val, (val & DLL_RDY), 10, 50 * USEC_PER_MSEC);
+		if (ret) {
+			dev_err(&phy->dev, "dllrdy failed, ret=%d\n", ret);
+			return ret;
+		}
+		break;
+
+	default:
+		break;
+	}
+	return 0;
+}
+
+static int thunderbay_emmc_phy_init(struct phy *phy)
+{
+	struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
+
+	tbh_phy->emmcclk = clk_get(&phy->dev, "emmcclk");
+
+	return PTR_ERR_OR_ZERO(tbh_phy->emmcclk);
+}
+
+static int thunderbay_emmc_phy_exit(struct phy *phy)
+{
+	struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
+
+	clk_put(tbh_phy->emmcclk);
+
+	return 0;
+}
+
+static int thunderbay_emmc_phy_power_on(struct phy *phy)
+{
+	struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
+	unsigned long rate;
+
+	/* Overwrite capability bits configurable in bootloader */
+	update_reg(tbh_phy, CTRL_CFG_0,
+		   SUPPORT_HS_MASK, SUPPORT_HS_SHIFT, 0x1);
+	update_reg(tbh_phy, CTRL_CFG_0,
+		   SUPPORT_8B_MASK, SUPPORT_8B_SHIFT, 0x1);
+	update_reg(tbh_phy, CTRL_CFG_1,
+		   SUPPORT_SDR50_MASK, SUPPORT_SDR50_SHIFT, 0x1);
+	update_reg(tbh_phy, CTRL_CFG_1,
+		   SUPPORT_DDR50_MASK, SUPPORT_DDR50_SHIFT, 0x1);
+	update_reg(tbh_phy, CTRL_CFG_1,
+		   SUPPORT_SDR104_MASK, SUPPORT_SDR104_SHIFT, 0x1);
+	update_reg(tbh_phy, CTRL_CFG_1,
+		   SUPPORT_HS400_MASK, SUPPORT_HS400_SHIFT, 0x1);
+	update_reg(tbh_phy, CTRL_CFG_1,
+		   SUPPORT_64B_MASK, SUPPORT_64B_SHIFT, 0x1);
+
+	if (tbh_phy->phy_power_sts == PHY_UNINITIALIZED) {
+		/* Indicates initialization, settings for init, same as 400KHZ setting */
+		update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK, SEL_DLY_TXCLK_SHIFT, 0x1);
+		update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK, SEL_DLY_RXCLK_SHIFT, 0x1);
+		update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK, ITAP_DLY_ENA_SHIFT, 0x0);
+		update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK, ITAP_DLY_SEL_SHIFT, 0x0);
+		update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK, OTAP_DLY_ENA_SHIFT, 0x0);
+		update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK, OTAP_DLY_SEL_SHIFT, 0);
+		update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK, DLL_TRIM_ICP_SHIFT, 0);
+		update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK, DR_TY_SHIFT, 0x1);
+
+	} else if (tbh_phy->phy_power_sts == PHY_INITIALIZED) {
+		/* Indicates actual clock setting */
+		rate = clk_get_rate(tbh_phy->emmcclk);
+		switch (rate) {
+		case 200000000:
+			update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
+				   SEL_DLY_TXCLK_SHIFT, 0x0);
+			update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK,
+				   SEL_DLY_RXCLK_SHIFT, 0x0);
+			update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK,
+				   ITAP_DLY_ENA_SHIFT, 0x0);
+			update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK,
+				   ITAP_DLY_SEL_SHIFT, 0x0);
+			update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK,
+				   OTAP_DLY_ENA_SHIFT, 0x1);
+			update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK,
+				   OTAP_DLY_SEL_SHIFT, 2);
+			update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK,
+				   DLL_TRIM_ICP_SHIFT, 0x8);
+			update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK,
+				   DR_TY_SHIFT, 0x1);
+			/* For HS400 only */
+			update_reg(tbh_phy, PHY_CFG_2, SEL_STRB_MASK,
+				   SEL_STRB_SHIFT, STRB);
+			break;
+
+		case 50000000 ... 52000000:
+			/* For both HS and DDR52 this setting works */
+			update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
+				   SEL_DLY_TXCLK_SHIFT, 0x1);
+			update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK,
+				   SEL_DLY_RXCLK_SHIFT, 0x1);
+			update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK,
+				   ITAP_DLY_ENA_SHIFT, 0x0);
+			update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK,
+				   ITAP_DLY_SEL_SHIFT, 0x0);
+			update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK,
+				   OTAP_DLY_ENA_SHIFT, 0x1);
+			update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK,
+				   OTAP_DLY_SEL_SHIFT, 4);
+			update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK,
+				   DLL_TRIM_ICP_SHIFT, 0x8);
+			update_reg(tbh_phy, PHY_CFG_0,
+				   DR_TY_MASK, DR_TY_SHIFT, 0x1);
+			break;
+
+		case 400000:
+			update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
+				   SEL_DLY_TXCLK_SHIFT, 0x1);
+			update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK,
+				   SEL_DLY_RXCLK_SHIFT, 0x1);
+			update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK,
+				   ITAP_DLY_ENA_SHIFT, 0x0);
+			update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK,
+				   ITAP_DLY_SEL_SHIFT, 0x0);
+			update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK,
+				   OTAP_DLY_ENA_SHIFT, 0x0);
+			update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK,
+				   OTAP_DLY_SEL_SHIFT, 0);
+			update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK,
+				   DLL_TRIM_ICP_SHIFT, 0);
+			update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK, DR_TY_SHIFT, 0x1);
+			break;
+
+		default:
+			update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_TXCLK_MASK,
+				   SEL_DLY_TXCLK_SHIFT, 0x1);
+			update_reg(tbh_phy, PHY_CFG_0, SEL_DLY_RXCLK_MASK,
+				   SEL_DLY_RXCLK_SHIFT, 0x1);
+			update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_ENA_MASK,
+				   ITAP_DLY_ENA_SHIFT, 0x0);
+			update_reg(tbh_phy, PHY_CFG_0, ITAP_DLY_SEL_MASK,
+				   ITAP_DLY_SEL_SHIFT, 0x0);
+			update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_ENA_MASK,
+				   OTAP_DLY_ENA_SHIFT, 0x1);
+			update_reg(tbh_phy, PHY_CFG_0, OTAP_DLY_SEL_MASK,
+				   OTAP_DLY_SEL_SHIFT, 2);
+			update_reg(tbh_phy, PHY_CFG_0, DLL_TRIM_ICP_MASK,
+				   DLL_TRIM_ICP_SHIFT, 0x8);
+			update_reg(tbh_phy, PHY_CFG_0, DR_TY_MASK,
+				   DR_TY_SHIFT, 0x1);
+			break;
+		}
+		/* Reset, init seq called without phy_power_off, this indicates init seq */
+		tbh_phy->phy_power_sts = PHY_UNINITIALIZED;
+	}
+
+	update_reg(tbh_phy, PHY_CFG_0, RETRIM_EN_MASK, RETRIM_EN_SHIFT, 0x1);
+	update_reg(tbh_phy, PHY_CFG_0, RETRIM_MASK, RETRIM_SHIFT, 0x0);
+
+	return thunderbay_emmc_phy_power(phy, 1);
+}
+
+static int thunderbay_emmc_phy_power_off(struct phy *phy)
+{
+	struct thunderbay_emmc_phy *tbh_phy = phy_get_drvdata(phy);
+
+	tbh_phy->phy_power_sts = PHY_INITIALIZED;
+
+	return thunderbay_emmc_phy_power(phy, 0);
+}
+
+static const struct phy_ops thunderbay_emmc_phy_ops = {
+	.init		= thunderbay_emmc_phy_init,
+	.exit		= thunderbay_emmc_phy_exit,
+	.power_on	= thunderbay_emmc_phy_power_on,
+	.power_off	= thunderbay_emmc_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id thunderbay_emmc_phy_of_match[] = {
+	{ .compatible = "intel,thunderbay-emmc-phy",
+		(void *)&thunderbay_emmc_phy_ops },
+	{}
+};
+MODULE_DEVICE_TABLE(of, thunderbay_emmc_phy_of_match);
+
+static int thunderbay_emmc_phy_probe(struct platform_device *pdev)
+{
+	struct thunderbay_emmc_phy *tbh_phy;
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *id;
+	struct phy *generic_phy;
+	struct resource *res;
+
+	if (!dev->of_node)
+		return -ENODEV;
+
+	tbh_phy = devm_kzalloc(dev, sizeof(*tbh_phy), GFP_KERNEL);
+	if (!tbh_phy)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	tbh_phy->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(tbh_phy->reg_base))
+		return PTR_ERR(tbh_phy->reg_base);
+
+	tbh_phy->phy_power_sts = PHY_UNINITIALIZED;
+	id = of_match_node(thunderbay_emmc_phy_of_match, pdev->dev.of_node);
+	if (!id) {
+		dev_err(dev, "failed to get match_node\n");
+		return -EINVAL;
+	}
+
+	generic_phy = devm_phy_create(dev, dev->of_node, id->data);
+	if (IS_ERR(generic_phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(generic_phy);
+	}
+
+	phy_set_drvdata(generic_phy, tbh_phy);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver thunderbay_emmc_phy_driver = {
+	.probe		 = thunderbay_emmc_phy_probe,
+	.driver		 = {
+		.name	 = "thunderbay-emmc-phy",
+		.of_match_table = thunderbay_emmc_phy_of_match,
+	},
+};
+module_platform_driver(thunderbay_emmc_phy_driver);
+
+MODULE_AUTHOR("Nandhini S <nandhini.srikandan@intel.com>");
+MODULE_AUTHOR("Rashmi A <rashmi.a@intel.com>");
+MODULE_DESCRIPTION("Intel Thunder Bay eMMC PHY driver");
+MODULE_LICENSE("GPL v2");