Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1318 insertions, 0 deletions

diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
new file mode 100644
index 000000000..dcd07a6a5
--- /dev/null
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -0,0 +1,1318 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright 2021 NXP */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <linux/arm-smccc.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/firmware.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_client.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/remoteproc.h>
+#include <linux/slab.h>
+
+#include "imx_rproc.h"
+#include "remoteproc_elf_helpers.h"
+#include "remoteproc_internal.h"
+
+#define DSP_RPROC_CLK_MAX			5
+
+#define REMOTE_IS_READY				BIT(0)
+#define REMOTE_READY_WAIT_MAX_RETRIES		500
+
+/* att flags */
+/* DSP own area */
+#define ATT_OWN					BIT(31)
+/* DSP instruction area */
+#define ATT_IRAM				BIT(30)
+
+/* Definitions for i.MX8MP */
+/* DAP registers */
+#define IMX8M_DAP_DEBUG				0x28800000
+#define IMX8M_DAP_DEBUG_SIZE			(64 * 1024)
+#define IMX8M_DAP_PWRCTL			(0x4000 + 0x3020)
+#define IMX8M_PWRCTL_CORERESET			BIT(16)
+
+/* DSP audio mix registers */
+#define IMX8M_AudioDSP_REG0			0x100
+#define IMX8M_AudioDSP_REG1			0x104
+#define IMX8M_AudioDSP_REG2			0x108
+#define IMX8M_AudioDSP_REG3			0x10c
+
+#define IMX8M_AudioDSP_REG2_RUNSTALL		BIT(5)
+#define IMX8M_AudioDSP_REG2_PWAITMODE		BIT(1)
+
+/* Definitions for i.MX8ULP */
+#define IMX8ULP_SIM_LPAV_REG_SYSCTRL0		0x8
+#define IMX8ULP_SYSCTRL0_DSP_DBG_RST		BIT(25)
+#define IMX8ULP_SYSCTRL0_DSP_PLAT_CLK_EN	BIT(19)
+#define IMX8ULP_SYSCTRL0_DSP_PBCLK_EN		BIT(18)
+#define IMX8ULP_SYSCTRL0_DSP_CLK_EN		BIT(17)
+#define IMX8ULP_SYSCTRL0_DSP_RST		BIT(16)
+#define IMX8ULP_SYSCTRL0_DSP_OCD_HALT		BIT(14)
+#define IMX8ULP_SYSCTRL0_DSP_STALL		BIT(13)
+
+#define IMX8ULP_SIP_HIFI_XRDC			0xc200000e
+
+/*
+ * enum - Predefined Mailbox Messages
+ *
+ * @RP_MBOX_SUSPEND_SYSTEM: system suspend request for the remote processor
+ *
+ * @RP_MBOX_SUSPEND_ACK: successful response from remote processor for a
+ * suspend request
+ *
+ * @RP_MBOX_RESUME_SYSTEM: system resume request for the remote processor
+ *
+ * @RP_MBOX_RESUME_ACK: successful response from remote processor for a
+ * resume request
+ */
+enum imx_dsp_rp_mbox_messages {
+	RP_MBOX_SUSPEND_SYSTEM			= 0xFF11,
+	RP_MBOX_SUSPEND_ACK			= 0xFF12,
+	RP_MBOX_RESUME_SYSTEM			= 0xFF13,
+	RP_MBOX_RESUME_ACK			= 0xFF14,
+};
+
+/**
+ * struct imx_dsp_rproc - DSP remote processor state
+ * @regmap: regmap handler
+ * @rproc: rproc handler
+ * @dsp_dcfg: device configuration pointer
+ * @clks: clocks needed by this device
+ * @cl: mailbox client to request the mailbox channel
+ * @cl_rxdb: mailbox client to request the mailbox channel for doorbell
+ * @tx_ch: mailbox tx channel handle
+ * @rx_ch: mailbox rx channel handle
+ * @rxdb_ch: mailbox rx doorbell channel handle
+ * @pd_dev: power domain device
+ * @pd_dev_link: power domain device link
+ * @ipc_handle: System Control Unit ipc handle
+ * @rproc_work: work for processing virtio interrupts
+ * @pm_comp: completion primitive to sync for suspend response
+ * @num_domains: power domain number
+ * @flags: control flags
+ */
+struct imx_dsp_rproc {
+	struct regmap				*regmap;
+	struct rproc				*rproc;
+	const struct imx_dsp_rproc_dcfg		*dsp_dcfg;
+	struct clk_bulk_data			clks[DSP_RPROC_CLK_MAX];
+	struct mbox_client			cl;
+	struct mbox_client			cl_rxdb;
+	struct mbox_chan			*tx_ch;
+	struct mbox_chan			*rx_ch;
+	struct mbox_chan			*rxdb_ch;
+	struct device				**pd_dev;
+	struct device_link			**pd_dev_link;
+	struct imx_sc_ipc			*ipc_handle;
+	struct work_struct			rproc_work;
+	struct completion			pm_comp;
+	int					num_domains;
+	u32					flags;
+};
+
+/**
+ * struct imx_dsp_rproc_dcfg - DSP remote processor configuration
+ * @dcfg: imx_rproc_dcfg handler
+ * @reset: reset callback function
+ */
+struct imx_dsp_rproc_dcfg {
+	const struct imx_rproc_dcfg		*dcfg;
+	int (*reset)(struct imx_dsp_rproc *priv);
+};
+
+static const struct imx_rproc_att imx_dsp_rproc_att_imx8qm[] = {
+	/* dev addr , sys addr  , size	    , flags */
+	{ 0x596e8000, 0x556e8000, 0x00008000, ATT_OWN },
+	{ 0x596f0000, 0x556f0000, 0x00008000, ATT_OWN },
+	{ 0x596f8000, 0x556f8000, 0x00000800, ATT_OWN | ATT_IRAM},
+	{ 0x55700000, 0x55700000, 0x00070000, ATT_OWN },
+	/* DDR (Data) */
+	{ 0x80000000, 0x80000000, 0x60000000, 0},
+};
+
+static const struct imx_rproc_att imx_dsp_rproc_att_imx8qxp[] = {
+	/* dev addr , sys addr  , size	    , flags */
+	{ 0x596e8000, 0x596e8000, 0x00008000, ATT_OWN },
+	{ 0x596f0000, 0x596f0000, 0x00008000, ATT_OWN },
+	{ 0x596f8000, 0x596f8000, 0x00000800, ATT_OWN | ATT_IRAM},
+	{ 0x59700000, 0x59700000, 0x00070000, ATT_OWN },
+	/* DDR (Data) */
+	{ 0x80000000, 0x80000000, 0x60000000, 0},
+};
+
+static const struct imx_rproc_att imx_dsp_rproc_att_imx8mp[] = {
+	/* dev addr , sys addr  , size	    , flags */
+	{ 0x3b6e8000, 0x3b6e8000, 0x00008000, ATT_OWN },
+	{ 0x3b6f0000, 0x3b6f0000, 0x00008000, ATT_OWN },
+	{ 0x3b6f8000, 0x3b6f8000, 0x00000800, ATT_OWN | ATT_IRAM},
+	{ 0x3b700000, 0x3b700000, 0x00040000, ATT_OWN },
+	/* DDR (Data) */
+	{ 0x40000000, 0x40000000, 0x80000000, 0},
+};
+
+static const struct imx_rproc_att imx_dsp_rproc_att_imx8ulp[] = {
+	/* dev addr , sys addr  , size	    , flags */
+	{ 0x21170000, 0x21170000, 0x00010000, ATT_OWN | ATT_IRAM},
+	{ 0x21180000, 0x21180000, 0x00010000, ATT_OWN },
+	/* DDR (Data) */
+	{ 0x0c000000, 0x80000000, 0x10000000, 0},
+	{ 0x30000000, 0x90000000, 0x10000000, 0},
+};
+
+/* Reset function for DSP on i.MX8MP */
+static int imx8mp_dsp_reset(struct imx_dsp_rproc *priv)
+{
+	void __iomem *dap = ioremap_wc(IMX8M_DAP_DEBUG, IMX8M_DAP_DEBUG_SIZE);
+	int pwrctl;
+
+	/* Put DSP into reset and stall */
+	pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
+	pwrctl |= IMX8M_PWRCTL_CORERESET;
+	writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
+
+	/* Keep reset asserted for 10 cycles */
+	usleep_range(1, 2);
+
+	regmap_update_bits(priv->regmap, IMX8M_AudioDSP_REG2,
+			   IMX8M_AudioDSP_REG2_RUNSTALL,
+			   IMX8M_AudioDSP_REG2_RUNSTALL);
+
+	/* Take the DSP out of reset and keep stalled for FW loading */
+	pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
+	pwrctl &= ~IMX8M_PWRCTL_CORERESET;
+	writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
+
+	iounmap(dap);
+	return 0;
+}
+
+/* Reset function for DSP on i.MX8ULP */
+static int imx8ulp_dsp_reset(struct imx_dsp_rproc *priv)
+{
+	struct arm_smccc_res res;
+
+	/* Put DSP into reset and stall */
+	regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+			   IMX8ULP_SYSCTRL0_DSP_RST, IMX8ULP_SYSCTRL0_DSP_RST);
+	regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+			   IMX8ULP_SYSCTRL0_DSP_STALL,
+			   IMX8ULP_SYSCTRL0_DSP_STALL);
+
+	/* Configure resources of DSP through TFA */
+	arm_smccc_smc(IMX8ULP_SIP_HIFI_XRDC, 0, 0, 0, 0, 0, 0, 0, &res);
+
+	/* Take the DSP out of reset and keep stalled for FW loading */
+	regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+			   IMX8ULP_SYSCTRL0_DSP_RST, 0);
+	regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+			   IMX8ULP_SYSCTRL0_DSP_DBG_RST, 0);
+
+	return 0;
+}
+
+/* Specific configuration for i.MX8MP */
+static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8mp = {
+	.src_reg	= IMX8M_AudioDSP_REG2,
+	.src_mask	= IMX8M_AudioDSP_REG2_RUNSTALL,
+	.src_start	= 0,
+	.src_stop	= IMX8M_AudioDSP_REG2_RUNSTALL,
+	.att		= imx_dsp_rproc_att_imx8mp,
+	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8mp),
+	.method		= IMX_RPROC_MMIO,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8mp = {
+	.dcfg		= &dsp_rproc_cfg_imx8mp,
+	.reset          = imx8mp_dsp_reset,
+};
+
+/* Specific configuration for i.MX8ULP */
+static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8ulp = {
+	.src_reg	= IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+	.src_mask	= IMX8ULP_SYSCTRL0_DSP_STALL,
+	.src_start	= 0,
+	.src_stop	= IMX8ULP_SYSCTRL0_DSP_STALL,
+	.att		= imx_dsp_rproc_att_imx8ulp,
+	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8ulp),
+	.method		= IMX_RPROC_MMIO,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8ulp = {
+	.dcfg		= &dsp_rproc_cfg_imx8ulp,
+	.reset          = imx8ulp_dsp_reset,
+};
+
+/* Specific configuration for i.MX8QXP */
+static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8qxp = {
+	.att		= imx_dsp_rproc_att_imx8qxp,
+	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8qxp),
+	.method		= IMX_RPROC_SCU_API,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qxp = {
+	.dcfg		= &dsp_rproc_cfg_imx8qxp,
+};
+
+/* Specific configuration for i.MX8QM */
+static const struct imx_rproc_dcfg dsp_rproc_cfg_imx8qm = {
+	.att		= imx_dsp_rproc_att_imx8qm,
+	.att_size	= ARRAY_SIZE(imx_dsp_rproc_att_imx8qm),
+	.method		= IMX_RPROC_SCU_API,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qm = {
+	.dcfg		= &dsp_rproc_cfg_imx8qm,
+};
+
+static int imx_dsp_rproc_ready(struct rproc *rproc)
+{
+	struct imx_dsp_rproc *priv = rproc->priv;
+	int i;
+
+	if (!priv->rxdb_ch)
+		return 0;
+
+	for (i = 0; i < REMOTE_READY_WAIT_MAX_RETRIES; i++) {
+		if (priv->flags & REMOTE_IS_READY)
+			return 0;
+		usleep_range(100, 200);
+	}
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * Start function for rproc_ops
+ *
+ * There is a handshake for start procedure: when DSP starts, it
+ * will send a doorbell message to this driver, then the
+ * REMOTE_IS_READY flags is set, then driver will kick
+ * a message to DSP.
+ */
+static int imx_dsp_rproc_start(struct rproc *rproc)
+{
+	struct imx_dsp_rproc *priv = rproc->priv;
+	const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
+	const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
+	struct device *dev = rproc->dev.parent;
+	int ret;
+
+	switch (dcfg->method) {
+	case IMX_RPROC_MMIO:
+		ret = regmap_update_bits(priv->regmap,
+					 dcfg->src_reg,
+					 dcfg->src_mask,
+					 dcfg->src_start);
+		break;
+	case IMX_RPROC_SCU_API:
+		ret = imx_sc_pm_cpu_start(priv->ipc_handle,
+					  IMX_SC_R_DSP,
+					  true,
+					  rproc->bootaddr);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	if (ret)
+		dev_err(dev, "Failed to enable remote core!\n");
+	else
+		ret = imx_dsp_rproc_ready(rproc);
+
+	return ret;
+}
+
+/*
+ * Stop function for rproc_ops
+ * It clears the REMOTE_IS_READY flags
+ */
+static int imx_dsp_rproc_stop(struct rproc *rproc)
+{
+	struct imx_dsp_rproc *priv = rproc->priv;
+	const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
+	const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
+	struct device *dev = rproc->dev.parent;
+	int ret = 0;
+
+	if (rproc->state == RPROC_CRASHED) {
+		priv->flags &= ~REMOTE_IS_READY;
+		return 0;
+	}
+
+	switch (dcfg->method) {
+	case IMX_RPROC_MMIO:
+		ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
+					 dcfg->src_stop);
+		break;
+	case IMX_RPROC_SCU_API:
+		ret = imx_sc_pm_cpu_start(priv->ipc_handle,
+					  IMX_SC_R_DSP,
+					  false,
+					  rproc->bootaddr);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	if (ret)
+		dev_err(dev, "Failed to stop remote core\n");
+	else
+		priv->flags &= ~REMOTE_IS_READY;
+
+	return ret;
+}
+
+/**
+ * imx_dsp_rproc_sys_to_da() - internal memory translation helper
+ * @priv: private data pointer
+ * @sys: system address (DDR address)
+ * @len: length of the memory buffer
+ * @da: device address to translate
+ *
+ * Convert system address (DDR address) to device address (DSP)
+ * for there may be memory remap for device.
+ */
+static int imx_dsp_rproc_sys_to_da(struct imx_dsp_rproc *priv, u64 sys,
+				   size_t len, u64 *da)
+{
+	const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
+	const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
+	int i;
+
+	/* Parse address translation table */
+	for (i = 0; i < dcfg->att_size; i++) {
+		const struct imx_rproc_att *att = &dcfg->att[i];
+
+		if (sys >= att->sa && sys + len <= att->sa + att->size) {
+			unsigned int offset = sys - att->sa;
+
+			*da = att->da + offset;
+			return 0;
+		}
+	}
+
+	return -ENOENT;
+}
+
+/* Main virtqueue message work function
+ *
+ * This function is executed upon scheduling of the i.MX DSP remoteproc
+ * driver's workqueue. The workqueue is scheduled by the mailbox rx
+ * handler.
+ *
+ * This work function processes both the Tx and Rx virtqueue indices on
+ * every invocation. The rproc_vq_interrupt function can detect if there
+ * are new unprocessed messages or not (returns IRQ_NONE vs IRQ_HANDLED),
+ * but there is no need to check for these return values. The index 0
+ * triggering will process all pending Rx buffers, and the index 1 triggering
+ * will process all newly available Tx buffers and will wakeup any potentially
+ * blocked senders.
+ *
+ * NOTE:
+ *    The current logic is based on an inherent design assumption of supporting
+ *    only 2 vrings, but this can be changed if needed.
+ */
+static void imx_dsp_rproc_vq_work(struct work_struct *work)
+{
+	struct imx_dsp_rproc *priv = container_of(work, struct imx_dsp_rproc,
+						  rproc_work);
+	struct rproc *rproc = priv->rproc;
+
+	mutex_lock(&rproc->lock);
+
+	if (rproc->state != RPROC_RUNNING)
+		goto unlock_mutex;
+
+	rproc_vq_interrupt(priv->rproc, 0);
+	rproc_vq_interrupt(priv->rproc, 1);
+
+unlock_mutex:
+	mutex_unlock(&rproc->lock);
+}
+
+/**
+ * imx_dsp_rproc_rx_tx_callback() - inbound mailbox message handler
+ * @cl: mailbox client pointer used for requesting the mailbox channel
+ * @data: mailbox payload
+ *
+ * This handler is invoked by mailbox driver whenever a mailbox
+ * message is received. Usually, the SUSPEND and RESUME related messages
+ * are handled in this function, other messages are handled by remoteproc core
+ */
+static void imx_dsp_rproc_rx_tx_callback(struct mbox_client *cl, void *data)
+{
+	struct rproc *rproc = dev_get_drvdata(cl->dev);
+	struct imx_dsp_rproc *priv = rproc->priv;
+	struct device *dev = rproc->dev.parent;
+	u32 message = (u32)(*(u32 *)data);
+
+	dev_dbg(dev, "mbox msg: 0x%x\n", message);
+
+	switch (message) {
+	case RP_MBOX_SUSPEND_ACK:
+		complete(&priv->pm_comp);
+		break;
+	case RP_MBOX_RESUME_ACK:
+		complete(&priv->pm_comp);
+		break;
+	default:
+		schedule_work(&priv->rproc_work);
+		break;
+	}
+}
+
+/**
+ * imx_dsp_rproc_rxdb_callback() - inbound mailbox message handler
+ * @cl: mailbox client pointer used for requesting the mailbox channel
+ * @data: mailbox payload
+ *
+ * For doorbell, there is no message specified, just set REMOTE_IS_READY
+ * flag.
+ */
+static void imx_dsp_rproc_rxdb_callback(struct mbox_client *cl, void *data)
+{
+	struct rproc *rproc = dev_get_drvdata(cl->dev);
+	struct imx_dsp_rproc *priv = rproc->priv;
+
+	/* Remote is ready after firmware is loaded and running */
+	priv->flags |= REMOTE_IS_READY;
+}
+
+/**
+ * imx_dsp_rproc_mbox_init() - request mailbox channels
+ * @priv: private data pointer
+ *
+ * Request three mailbox channels (tx, rx, rxdb).
+ */
+static int imx_dsp_rproc_mbox_init(struct imx_dsp_rproc *priv)
+{
+	struct device *dev = priv->rproc->dev.parent;
+	struct mbox_client *cl;
+	int ret;
+
+	if (!of_get_property(dev->of_node, "mbox-names", NULL))
+		return 0;
+
+	cl = &priv->cl;
+	cl->dev = dev;
+	cl->tx_block = true;
+	cl->tx_tout = 100;
+	cl->knows_txdone = false;
+	cl->rx_callback = imx_dsp_rproc_rx_tx_callback;
+
+	/* Channel for sending message */
+	priv->tx_ch = mbox_request_channel_byname(cl, "tx");
+	if (IS_ERR(priv->tx_ch)) {
+		ret = PTR_ERR(priv->tx_ch);
+		dev_dbg(cl->dev, "failed to request tx mailbox channel: %d\n",
+			ret);
+		goto err_out;
+	}
+
+	/* Channel for receiving message */
+	priv->rx_ch = mbox_request_channel_byname(cl, "rx");
+	if (IS_ERR(priv->rx_ch)) {
+		ret = PTR_ERR(priv->rx_ch);
+		dev_dbg(cl->dev, "failed to request rx mailbox channel: %d\n",
+			ret);
+		goto err_out;
+	}
+
+	cl = &priv->cl_rxdb;
+	cl->dev = dev;
+	cl->rx_callback = imx_dsp_rproc_rxdb_callback;
+
+	/*
+	 * RX door bell is used to receive the ready signal from remote
+	 * after firmware loaded.
+	 */
+	priv->rxdb_ch = mbox_request_channel_byname(cl, "rxdb");
+	if (IS_ERR(priv->rxdb_ch)) {
+		ret = PTR_ERR(priv->rxdb_ch);
+		dev_dbg(cl->dev, "failed to request mbox chan rxdb, ret %d\n",
+			ret);
+		goto err_out;
+	}
+
+	return 0;
+
+err_out:
+	if (!IS_ERR(priv->tx_ch))
+		mbox_free_channel(priv->tx_ch);
+	if (!IS_ERR(priv->rx_ch))
+		mbox_free_channel(priv->rx_ch);
+	if (!IS_ERR(priv->rxdb_ch))
+		mbox_free_channel(priv->rxdb_ch);
+
+	return ret;
+}
+
+static void imx_dsp_rproc_free_mbox(struct imx_dsp_rproc *priv)
+{
+	mbox_free_channel(priv->tx_ch);
+	mbox_free_channel(priv->rx_ch);
+	mbox_free_channel(priv->rxdb_ch);
+}
+
+/**
+ * imx_dsp_rproc_add_carveout() - request mailbox channels
+ * @priv: private data pointer
+ *
+ * This function registers specified memory entry in @rproc carveouts list
+ * The carveouts can help to mapping the memory address for DSP.
+ */
+static int imx_dsp_rproc_add_carveout(struct imx_dsp_rproc *priv)
+{
+	const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
+	const struct imx_rproc_dcfg *dcfg = dsp_dcfg->dcfg;
+	struct rproc *rproc = priv->rproc;
+	struct device *dev = rproc->dev.parent;
+	struct device_node *np = dev->of_node;
+	struct of_phandle_iterator it;
+	struct rproc_mem_entry *mem;
+	struct reserved_mem *rmem;
+	void __iomem *cpu_addr;
+	int a;
+	u64 da;
+
+	/* Remap required addresses */
+	for (a = 0; a < dcfg->att_size; a++) {
+		const struct imx_rproc_att *att = &dcfg->att[a];
+
+		if (!(att->flags & ATT_OWN))
+			continue;
+
+		if (imx_dsp_rproc_sys_to_da(priv, att->sa, att->size, &da))
+			return -EINVAL;
+
+		cpu_addr = devm_ioremap_wc(dev, att->sa, att->size);
+		if (!cpu_addr) {
+			dev_err(dev, "failed to map memory %p\n", &att->sa);
+			return -ENOMEM;
+		}
+
+		/* Register memory region */
+		mem = rproc_mem_entry_init(dev, (void __force *)cpu_addr, (dma_addr_t)att->sa,
+					   att->size, da, NULL, NULL, "dsp_mem");
+
+		if (mem)
+			rproc_coredump_add_segment(rproc, da, att->size);
+		else
+			return -ENOMEM;
+
+		rproc_add_carveout(rproc, mem);
+	}
+
+	of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
+	while (of_phandle_iterator_next(&it) == 0) {
+		/*
+		 * Ignore the first memory region which will be used vdev buffer.
+		 * No need to do extra handlings, rproc_add_virtio_dev will handle it.
+		 */
+		if (!strcmp(it.node->name, "vdev0buffer"))
+			continue;
+
+		rmem = of_reserved_mem_lookup(it.node);
+		if (!rmem) {
+			of_node_put(it.node);
+			dev_err(dev, "unable to acquire memory-region\n");
+			return -EINVAL;
+		}
+
+		if (imx_dsp_rproc_sys_to_da(priv, rmem->base, rmem->size, &da)) {
+			of_node_put(it.node);
+			return -EINVAL;
+		}
+
+		cpu_addr = devm_ioremap_wc(dev, rmem->base, rmem->size);
+		if (!cpu_addr) {
+			of_node_put(it.node);
+			dev_err(dev, "failed to map memory %p\n", &rmem->base);
+			return -ENOMEM;
+		}
+
+		/* Register memory region */
+		mem = rproc_mem_entry_init(dev, (void __force *)cpu_addr, (dma_addr_t)rmem->base,
+					   rmem->size, da, NULL, NULL, it.node->name);
+
+		if (mem) {
+			rproc_coredump_add_segment(rproc, da, rmem->size);
+		} else {
+			of_node_put(it.node);
+			return -ENOMEM;
+		}
+
+		rproc_add_carveout(rproc, mem);
+	}
+
+	return 0;
+}
+
+/* Prepare function for rproc_ops */
+static int imx_dsp_rproc_prepare(struct rproc *rproc)
+{
+	struct imx_dsp_rproc *priv = rproc->priv;
+	struct device *dev = rproc->dev.parent;
+	struct rproc_mem_entry *carveout;
+	int ret;
+
+	ret = imx_dsp_rproc_add_carveout(priv);
+	if (ret) {
+		dev_err(dev, "failed on imx_dsp_rproc_add_carveout\n");
+		return ret;
+	}
+
+	pm_runtime_get_sync(dev);
+
+	/*
+	 * Clear buffers after pm rumtime for internal ocram is not
+	 * accessible if power and clock are not enabled.
+	 */
+	list_for_each_entry(carveout, &rproc->carveouts, node) {
+		if (carveout->va)
+			memset(carveout->va, 0, carveout->len);
+	}
+
+	return  0;
+}
+
+/* Unprepare function for rproc_ops */
+static int imx_dsp_rproc_unprepare(struct rproc *rproc)
+{
+	pm_runtime_put_sync(rproc->dev.parent);
+
+	return  0;
+}
+
+/* Kick function for rproc_ops */
+static void imx_dsp_rproc_kick(struct rproc *rproc, int vqid)
+{
+	struct imx_dsp_rproc *priv = rproc->priv;
+	struct device *dev = rproc->dev.parent;
+	int err;
+	__u32 mmsg;
+
+	if (!priv->tx_ch) {
+		dev_err(dev, "No initialized mbox tx channel\n");
+		return;
+	}
+
+	/*
+	 * Send the index of the triggered virtqueue as the mu payload.
+	 * Let remote processor know which virtqueue is used.
+	 */
+	mmsg = vqid;
+
+	err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
+	if (err < 0)
+		dev_err(dev, "%s: failed (%d, err:%d)\n", __func__, vqid, err);
+}
+
+/*
+ * Custom memory copy implementation for i.MX DSP Cores
+ *
+ * The IRAM is part of the HiFi DSP.
+ * According to hw specs only 32-bits writes are allowed.
+ */
+static int imx_dsp_rproc_memcpy(void *dst, const void *src, size_t size)
+{
+	void __iomem *dest = (void __iomem *)dst;
+	const u8 *src_byte = src;
+	const u32 *source = src;
+	u32 affected_mask;
+	int i, q, r;
+	u32 tmp;
+
+	/* destination must be 32bit aligned */
+	if (!IS_ALIGNED((uintptr_t)dest, 4))
+		return -EINVAL;
+
+	q = size / 4;
+	r = size % 4;
+
+	/* copy data in units of 32 bits at a time */
+	for (i = 0; i < q; i++)
+		writel(source[i], dest + i * 4);
+
+	if (r) {
+		affected_mask = GENMASK(8 * r, 0);
+
+		/*
+		 * first read the 32bit data of dest, then change affected
+		 * bytes, and write back to dest.
+		 * For unaffected bytes, it should not be changed
+		 */
+		tmp = readl(dest + q * 4);
+		tmp &= ~affected_mask;
+
+		/* avoid reading after end of source */
+		for (i = 0; i < r; i++)
+			tmp |= (src_byte[q * 4 + i] << (8 * i));
+
+		writel(tmp, dest + q * 4);
+	}
+
+	return 0;
+}
+
+/*
+ * Custom memset implementation for i.MX DSP Cores
+ *
+ * The IRAM is part of the HiFi DSP.
+ * According to hw specs only 32-bits writes are allowed.
+ */
+static int imx_dsp_rproc_memset(void *addr, u8 value, size_t size)
+{
+	void __iomem *tmp_dst = (void __iomem *)addr;
+	u32 tmp_val = value;
+	u32 affected_mask;
+	int q, r;
+	u32 tmp;
+
+	/* destination must be 32bit aligned */
+	if (!IS_ALIGNED((uintptr_t)addr, 4))
+		return -EINVAL;
+
+	tmp_val |= tmp_val << 8;
+	tmp_val |= tmp_val << 16;
+
+	q = size / 4;
+	r = size % 4;
+
+	while (q--)
+		writel(tmp_val, tmp_dst++);
+
+	if (r) {
+		affected_mask = GENMASK(8 * r, 0);
+
+		/*
+		 * first read the 32bit data of addr, then change affected
+		 * bytes, and write back to addr.
+		 * For unaffected bytes, it should not be changed
+		 */
+		tmp = readl(tmp_dst);
+		tmp &= ~affected_mask;
+
+		tmp |= (tmp_val & affected_mask);
+		writel(tmp, tmp_dst);
+	}
+
+	return 0;
+}
+
+/*
+ * imx_dsp_rproc_elf_load_segments() - load firmware segments to memory
+ * @rproc: remote processor which will be booted using these fw segments
+ * @fw: the ELF firmware image
+ *
+ * This function loads the firmware segments to memory, where the remote
+ * processor expects them.
+ *
+ * Return: 0 on success and an appropriate error code otherwise
+ */
+static int imx_dsp_rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
+{
+	struct device *dev = &rproc->dev;
+	const void *ehdr, *phdr;
+	int i, ret = 0;
+	u16 phnum;
+	const u8 *elf_data = fw->data;
+	u8 class = fw_elf_get_class(fw);
+	u32 elf_phdr_get_size = elf_size_of_phdr(class);
+
+	ehdr = elf_data;
+	phnum = elf_hdr_get_e_phnum(class, ehdr);
+	phdr = elf_data + elf_hdr_get_e_phoff(class, ehdr);
+
+	/* go through the available ELF segments */
+	for (i = 0; i < phnum; i++, phdr += elf_phdr_get_size) {
+		u64 da = elf_phdr_get_p_paddr(class, phdr);
+		u64 memsz = elf_phdr_get_p_memsz(class, phdr);
+		u64 filesz = elf_phdr_get_p_filesz(class, phdr);
+		u64 offset = elf_phdr_get_p_offset(class, phdr);
+		u32 type = elf_phdr_get_p_type(class, phdr);
+		void *ptr;
+
+		if (type != PT_LOAD || !memsz)
+			continue;
+
+		dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n",
+			type, da, memsz, filesz);
+
+		if (filesz > memsz) {
+			dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n",
+				filesz, memsz);
+			ret = -EINVAL;
+			break;
+		}
+
+		if (offset + filesz > fw->size) {
+			dev_err(dev, "truncated fw: need 0x%llx avail 0x%zx\n",
+				offset + filesz, fw->size);
+			ret = -EINVAL;
+			break;
+		}
+
+		if (!rproc_u64_fit_in_size_t(memsz)) {
+			dev_err(dev, "size (%llx) does not fit in size_t type\n",
+				memsz);
+			ret = -EOVERFLOW;
+			break;
+		}
+
+		/* grab the kernel address for this device address */
+		ptr = rproc_da_to_va(rproc, da, memsz, NULL);
+		if (!ptr) {
+			dev_err(dev, "bad phdr da 0x%llx mem 0x%llx\n", da,
+				memsz);
+			ret = -EINVAL;
+			break;
+		}
+
+		/* put the segment where the remote processor expects it */
+		if (filesz) {
+			ret = imx_dsp_rproc_memcpy(ptr, elf_data + offset, filesz);
+			if (ret) {
+				dev_err(dev, "memory copy failed for da 0x%llx memsz 0x%llx\n",
+					da, memsz);
+				break;
+			}
+		}
+
+		/* zero out remaining memory for this segment */
+		if (memsz > filesz) {
+			ret = imx_dsp_rproc_memset(ptr + filesz, 0, memsz - filesz);
+			if (ret) {
+				dev_err(dev, "memset failed for da 0x%llx memsz 0x%llx\n",
+					da, memsz);
+				break;
+			}
+		}
+	}
+
+	return ret;
+}
+
+static int imx_dsp_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
+{
+	if (rproc_elf_load_rsc_table(rproc, fw))
+		dev_warn(&rproc->dev, "no resource table found for this firmware\n");
+
+	return 0;
+}
+
+static const struct rproc_ops imx_dsp_rproc_ops = {
+	.prepare	= imx_dsp_rproc_prepare,
+	.unprepare	= imx_dsp_rproc_unprepare,
+	.start		= imx_dsp_rproc_start,
+	.stop		= imx_dsp_rproc_stop,
+	.kick		= imx_dsp_rproc_kick,
+	.load		= imx_dsp_rproc_elf_load_segments,
+	.parse_fw	= imx_dsp_rproc_parse_fw,
+	.sanity_check	= rproc_elf_sanity_check,
+	.get_boot_addr	= rproc_elf_get_boot_addr,
+};
+
+/**
+ * imx_dsp_attach_pm_domains() - attach the power domains
+ * @priv: private data pointer
+ *
+ * On i.MX8QM and i.MX8QXP there is multiple power domains
+ * required, so need to link them.
+ */
+static int imx_dsp_attach_pm_domains(struct imx_dsp_rproc *priv)
+{
+	struct device *dev = priv->rproc->dev.parent;
+	int ret, i;
+
+	priv->num_domains = of_count_phandle_with_args(dev->of_node,
+						       "power-domains",
+						       "#power-domain-cells");
+
+	/* If only one domain, then no need to link the device */
+	if (priv->num_domains <= 1)
+		return 0;
+
+	priv->pd_dev = devm_kmalloc_array(dev, priv->num_domains,
+					  sizeof(*priv->pd_dev),
+					  GFP_KERNEL);
+	if (!priv->pd_dev)
+		return -ENOMEM;
+
+	priv->pd_dev_link = devm_kmalloc_array(dev, priv->num_domains,
+					       sizeof(*priv->pd_dev_link),
+					       GFP_KERNEL);
+	if (!priv->pd_dev_link)
+		return -ENOMEM;
+
+	for (i = 0; i < priv->num_domains; i++) {
+		priv->pd_dev[i] = dev_pm_domain_attach_by_id(dev, i);
+		if (IS_ERR(priv->pd_dev[i])) {
+			ret = PTR_ERR(priv->pd_dev[i]);
+			goto detach_pm;
+		}
+
+		/*
+		 * device_link_add will check priv->pd_dev[i], if it is
+		 * NULL, then will break.
+		 */
+		priv->pd_dev_link[i] = device_link_add(dev,
+						       priv->pd_dev[i],
+						       DL_FLAG_STATELESS |
+						       DL_FLAG_PM_RUNTIME);
+		if (!priv->pd_dev_link[i]) {
+			dev_pm_domain_detach(priv->pd_dev[i], false);
+			ret = -EINVAL;
+			goto detach_pm;
+		}
+	}
+
+	return 0;
+
+detach_pm:
+	while (--i >= 0) {
+		device_link_del(priv->pd_dev_link[i]);
+		dev_pm_domain_detach(priv->pd_dev[i], false);
+	}
+
+	return ret;
+}
+
+static int imx_dsp_detach_pm_domains(struct imx_dsp_rproc *priv)
+{
+	int i;
+
+	if (priv->num_domains <= 1)
+		return 0;
+
+	for (i = 0; i < priv->num_domains; i++) {
+		device_link_del(priv->pd_dev_link[i]);
+		dev_pm_domain_detach(priv->pd_dev[i], false);
+	}
+
+	return 0;
+}
+
+/**
+ * imx_dsp_rproc_detect_mode() - detect DSP control mode
+ * @priv: private data pointer
+ *
+ * Different platform has different control method for DSP, which depends
+ * on how the DSP is integrated in platform.
+ *
+ * For i.MX8QXP and i.MX8QM, DSP should be started and stopped by System
+ * Control Unit.
+ * For i.MX8MP and i.MX8ULP, DSP should be started and stopped by system
+ * integration module.
+ */
+static int imx_dsp_rproc_detect_mode(struct imx_dsp_rproc *priv)
+{
+	const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
+	struct device *dev = priv->rproc->dev.parent;
+	struct regmap *regmap;
+	int ret = 0;
+
+	switch (dsp_dcfg->dcfg->method) {
+	case IMX_RPROC_SCU_API:
+		ret = imx_scu_get_handle(&priv->ipc_handle);
+		if (ret)
+			return ret;
+		break;
+	case IMX_RPROC_MMIO:
+		regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,dsp-ctrl");
+		if (IS_ERR(regmap)) {
+			dev_err(dev, "failed to find syscon\n");
+			return PTR_ERR(regmap);
+		}
+
+		priv->regmap = regmap;
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+		break;
+	}
+
+	return ret;
+}
+
+static const char *imx_dsp_clks_names[DSP_RPROC_CLK_MAX] = {
+	/* DSP clocks */
+	"core", "ocram", "debug", "ipg", "mu",
+};
+
+static int imx_dsp_rproc_clk_get(struct imx_dsp_rproc *priv)
+{
+	struct device *dev = priv->rproc->dev.parent;
+	struct clk_bulk_data *clks = priv->clks;
+	int i;
+
+	for (i = 0; i < DSP_RPROC_CLK_MAX; i++)
+		clks[i].id = imx_dsp_clks_names[i];
+
+	return devm_clk_bulk_get_optional(dev, DSP_RPROC_CLK_MAX, clks);
+}
+
+static int imx_dsp_rproc_probe(struct platform_device *pdev)
+{
+	const struct imx_dsp_rproc_dcfg *dsp_dcfg;
+	struct device *dev = &pdev->dev;
+	struct imx_dsp_rproc *priv;
+	struct rproc *rproc;
+	const char *fw_name;
+	int ret;
+
+	dsp_dcfg = of_device_get_match_data(dev);
+	if (!dsp_dcfg)
+		return -ENODEV;
+
+	ret = rproc_of_parse_firmware(dev, 0, &fw_name);
+	if (ret) {
+		dev_err(dev, "failed to parse firmware-name property, ret = %d\n",
+			ret);
+		return ret;
+	}
+
+	rproc = rproc_alloc(dev, "imx-dsp-rproc", &imx_dsp_rproc_ops, fw_name,
+			    sizeof(*priv));
+	if (!rproc)
+		return -ENOMEM;
+
+	priv = rproc->priv;
+	priv->rproc = rproc;
+	priv->dsp_dcfg = dsp_dcfg;
+
+	dev_set_drvdata(dev, rproc);
+
+	INIT_WORK(&priv->rproc_work, imx_dsp_rproc_vq_work);
+
+	ret = imx_dsp_rproc_detect_mode(priv);
+	if (ret) {
+		dev_err(dev, "failed on imx_dsp_rproc_detect_mode\n");
+		goto err_put_rproc;
+	}
+
+	/* There are multiple power domains required by DSP on some platform */
+	ret = imx_dsp_attach_pm_domains(priv);
+	if (ret) {
+		dev_err(dev, "failed on imx_dsp_attach_pm_domains\n");
+		goto err_put_rproc;
+	}
+	/* Get clocks */
+	ret = imx_dsp_rproc_clk_get(priv);
+	if (ret) {
+		dev_err(dev, "failed on imx_dsp_rproc_clk_get\n");
+		goto err_detach_domains;
+	}
+
+	init_completion(&priv->pm_comp);
+	rproc->auto_boot = false;
+	ret = rproc_add(rproc);
+	if (ret) {
+		dev_err(dev, "rproc_add failed\n");
+		goto err_detach_domains;
+	}
+
+	pm_runtime_enable(dev);
+
+	return 0;
+
+err_detach_domains:
+	imx_dsp_detach_pm_domains(priv);
+err_put_rproc:
+	rproc_free(rproc);
+
+	return ret;
+}
+
+static int imx_dsp_rproc_remove(struct platform_device *pdev)
+{
+	struct rproc *rproc = platform_get_drvdata(pdev);
+	struct imx_dsp_rproc *priv = rproc->priv;
+
+	pm_runtime_disable(&pdev->dev);
+	rproc_del(rproc);
+	imx_dsp_detach_pm_domains(priv);
+	rproc_free(rproc);
+
+	return 0;
+}
+
+/* pm runtime functions */
+static int imx_dsp_runtime_resume(struct device *dev)
+{
+	struct rproc *rproc = dev_get_drvdata(dev);
+	struct imx_dsp_rproc *priv = rproc->priv;
+	const struct imx_dsp_rproc_dcfg *dsp_dcfg = priv->dsp_dcfg;
+	int ret;
+
+	/*
+	 * There is power domain attached with mailbox, if setup mailbox
+	 * in probe(), then the power of mailbox is always enabled,
+	 * the power can't be saved.
+	 * So move setup of mailbox to runtime resume.
+	 */
+	ret = imx_dsp_rproc_mbox_init(priv);
+	if (ret) {
+		dev_err(dev, "failed on imx_dsp_rproc_mbox_init\n");
+		return ret;
+	}
+
+	ret = clk_bulk_prepare_enable(DSP_RPROC_CLK_MAX, priv->clks);
+	if (ret) {
+		dev_err(dev, "failed on clk_bulk_prepare_enable\n");
+		return ret;
+	}
+
+	/* Reset DSP if needed */
+	if (dsp_dcfg->reset)
+		dsp_dcfg->reset(priv);
+
+	return 0;
+}
+
+static int imx_dsp_runtime_suspend(struct device *dev)
+{
+	struct rproc *rproc = dev_get_drvdata(dev);
+	struct imx_dsp_rproc *priv = rproc->priv;
+
+	clk_bulk_disable_unprepare(DSP_RPROC_CLK_MAX, priv->clks);
+
+	imx_dsp_rproc_free_mbox(priv);
+
+	return 0;
+}
+
+static void imx_dsp_load_firmware(const struct firmware *fw, void *context)
+{
+	struct rproc *rproc = context;
+	int ret;
+
+	/*
+	 * Same flow as start procedure.
+	 * Load the ELF segments to memory firstly.
+	 */
+	ret = rproc_load_segments(rproc, fw);
+	if (ret)
+		goto out;
+
+	/* Start the remote processor */
+	ret = rproc->ops->start(rproc);
+	if (ret)
+		goto out;
+
+	rproc->ops->kick(rproc, 0);
+
+out:
+	release_firmware(fw);
+}
+
+static __maybe_unused int imx_dsp_suspend(struct device *dev)
+{
+	struct rproc *rproc = dev_get_drvdata(dev);
+	struct imx_dsp_rproc *priv = rproc->priv;
+	__u32 mmsg = RP_MBOX_SUSPEND_SYSTEM;
+	int ret;
+
+	if (rproc->state != RPROC_RUNNING)
+		goto out;
+
+	reinit_completion(&priv->pm_comp);
+
+	/* Tell DSP that suspend is happening */
+	ret = mbox_send_message(priv->tx_ch, (void *)&mmsg);
+	if (ret < 0) {
+		dev_err(dev, "PM mbox_send_message failed: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * DSP need to save the context at suspend.
+	 * Here waiting the response for DSP, then power can be disabled.
+	 */
+	if (!wait_for_completion_timeout(&priv->pm_comp, msecs_to_jiffies(100)))
+		return -EBUSY;
+
+out:
+	/*
+	 * The power of DSP is disabled in suspend, so force pm runtime
+	 * to be suspend, then we can reenable the power and clocks at
+	 * resume stage.
+	 */
+	return pm_runtime_force_suspend(dev);
+}
+
+static __maybe_unused int imx_dsp_resume(struct device *dev)
+{
+	struct rproc *rproc = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = pm_runtime_force_resume(dev);
+	if (ret)
+		return ret;
+
+	if (rproc->state != RPROC_RUNNING)
+		return 0;
+
+	/*
+	 * The power of DSP is disabled at suspend, the memory of dsp
+	 * is reset, the image segments are lost. So need to reload
+	 * firmware and restart the DSP if it is in running state.
+	 */
+	ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
+				      rproc->firmware, dev, GFP_KERNEL,
+				      rproc, imx_dsp_load_firmware);
+	if (ret < 0) {
+		dev_err(dev, "load firmware failed: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	pm_runtime_force_suspend(dev);
+
+	return ret;
+}
+
+static const struct dev_pm_ops imx_dsp_rproc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(imx_dsp_suspend, imx_dsp_resume)
+	SET_RUNTIME_PM_OPS(imx_dsp_runtime_suspend,
+			   imx_dsp_runtime_resume, NULL)
+};
+
+static const struct of_device_id imx_dsp_rproc_of_match[] = {
+	{ .compatible = "fsl,imx8qxp-hifi4", .data = &imx_dsp_rproc_cfg_imx8qxp },
+	{ .compatible = "fsl,imx8qm-hifi4",  .data = &imx_dsp_rproc_cfg_imx8qm },
+	{ .compatible = "fsl,imx8mp-hifi4",  .data = &imx_dsp_rproc_cfg_imx8mp },
+	{ .compatible = "fsl,imx8ulp-hifi4", .data = &imx_dsp_rproc_cfg_imx8ulp },
+	{},
+};
+MODULE_DEVICE_TABLE(of, imx_dsp_rproc_of_match);
+
+static struct platform_driver imx_dsp_rproc_driver = {
+	.probe = imx_dsp_rproc_probe,
+	.remove = imx_dsp_rproc_remove,
+	.driver = {
+		.name = "imx-dsp-rproc",
+		.of_match_table = imx_dsp_rproc_of_match,
+		.pm = &imx_dsp_rproc_pm_ops,
+	},
+};
+module_platform_driver(imx_dsp_rproc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("i.MX HiFi Core Remote Processor Control Driver");
+MODULE_AUTHOR("Shengjiu Wang <shengjiu.wang@nxp.com>");