Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1396 insertions, 0 deletions

diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
new file mode 100644
index 000000000..430fab026
--- /dev/null
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -0,0 +1,1396 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * OMAP Remote Processor driver
+ *
+ * Copyright (C) 2011-2020 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Ohad Ben-Cohen <ohad@wizery.com>
+ * Brian Swetland <swetland@google.com>
+ * Fernando Guzman Lugo <fernando.lugo@ti.com>
+ * Mark Grosen <mgrosen@ti.com>
+ * Suman Anna <s-anna@ti.com>
+ * Hari Kanigeri <h-kanigeri2@ti.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/clk/ti.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/remoteproc.h>
+#include <linux/mailbox_client.h>
+#include <linux/omap-iommu.h>
+#include <linux/omap-mailbox.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/reset.h>
+#include <clocksource/timer-ti-dm.h>
+
+#include <linux/platform_data/dmtimer-omap.h>
+
+#include "omap_remoteproc.h"
+#include "remoteproc_internal.h"
+
+/* default auto-suspend delay (ms) */
+#define DEFAULT_AUTOSUSPEND_DELAY		10000
+
+/**
+ * struct omap_rproc_boot_data - boot data structure for the DSP omap rprocs
+ * @syscon: regmap handle for the system control configuration module
+ * @boot_reg: boot register offset within the @syscon regmap
+ * @boot_reg_shift: bit-field shift required for the boot address value in
+ *		    @boot_reg
+ */
+struct omap_rproc_boot_data {
+	struct regmap *syscon;
+	unsigned int boot_reg;
+	unsigned int boot_reg_shift;
+};
+
+/**
+ * struct omap_rproc_mem - internal memory structure
+ * @cpu_addr: MPU virtual address of the memory region
+ * @bus_addr: bus address used to access the memory region
+ * @dev_addr: device address of the memory region from DSP view
+ * @size: size of the memory region
+ */
+struct omap_rproc_mem {
+	void __iomem *cpu_addr;
+	phys_addr_t bus_addr;
+	u32 dev_addr;
+	size_t size;
+};
+
+/**
+ * struct omap_rproc_timer - data structure for a timer used by a omap rproc
+ * @odt: timer pointer
+ * @timer_ops: OMAP dmtimer ops for @odt timer
+ * @irq: timer irq
+ */
+struct omap_rproc_timer {
+	struct omap_dm_timer *odt;
+	const struct omap_dm_timer_ops *timer_ops;
+	int irq;
+};
+
+/**
+ * struct omap_rproc - omap remote processor state
+ * @mbox: mailbox channel handle
+ * @client: mailbox client to request the mailbox channel
+ * @boot_data: boot data structure for setting processor boot address
+ * @mem: internal memory regions data
+ * @num_mems: number of internal memory regions
+ * @num_timers: number of rproc timer(s)
+ * @num_wd_timers: number of rproc watchdog timers
+ * @timers: timer(s) info used by rproc
+ * @autosuspend_delay: auto-suspend delay value to be used for runtime pm
+ * @need_resume: if true a resume is needed in the system resume callback
+ * @rproc: rproc handle
+ * @reset: reset handle
+ * @pm_comp: completion primitive to sync for suspend response
+ * @fck: functional clock for the remoteproc
+ * @suspend_acked: state machine flag to store the suspend request ack
+ */
+struct omap_rproc {
+	struct mbox_chan *mbox;
+	struct mbox_client client;
+	struct omap_rproc_boot_data *boot_data;
+	struct omap_rproc_mem *mem;
+	int num_mems;
+	int num_timers;
+	int num_wd_timers;
+	struct omap_rproc_timer *timers;
+	int autosuspend_delay;
+	bool need_resume;
+	struct rproc *rproc;
+	struct reset_control *reset;
+	struct completion pm_comp;
+	struct clk *fck;
+	bool suspend_acked;
+};
+
+/**
+ * struct omap_rproc_mem_data - memory definitions for an omap remote processor
+ * @name: name for this memory entry
+ * @dev_addr: device address for the memory entry
+ */
+struct omap_rproc_mem_data {
+	const char *name;
+	const u32 dev_addr;
+};
+
+/**
+ * struct omap_rproc_dev_data - device data for the omap remote processor
+ * @device_name: device name of the remote processor
+ * @mems: memory definitions for this remote processor
+ */
+struct omap_rproc_dev_data {
+	const char *device_name;
+	const struct omap_rproc_mem_data *mems;
+};
+
+/**
+ * omap_rproc_request_timer() - request a timer for a remoteproc
+ * @dev: device requesting the timer
+ * @np: device node pointer to the desired timer
+ * @timer: handle to a struct omap_rproc_timer to return the timer handle
+ *
+ * This helper function is used primarily to request a timer associated with
+ * a remoteproc. The returned handle is stored in the .odt field of the
+ * @timer structure passed in, and is used to invoke other timer specific
+ * ops (like starting a timer either during device initialization or during
+ * a resume operation, or for stopping/freeing a timer).
+ *
+ * Return: 0 on success, otherwise an appropriate failure
+ */
+static int omap_rproc_request_timer(struct device *dev, struct device_node *np,
+				    struct omap_rproc_timer *timer)
+{
+	int ret;
+
+	timer->odt = timer->timer_ops->request_by_node(np);
+	if (!timer->odt) {
+		dev_err(dev, "request for timer node %p failed\n", np);
+		return -EBUSY;
+	}
+
+	ret = timer->timer_ops->set_source(timer->odt, OMAP_TIMER_SRC_SYS_CLK);
+	if (ret) {
+		dev_err(dev, "error setting OMAP_TIMER_SRC_SYS_CLK as source for timer node %p\n",
+			np);
+		timer->timer_ops->free(timer->odt);
+		return ret;
+	}
+
+	/* clean counter, remoteproc code will set the value */
+	timer->timer_ops->set_load(timer->odt, 0);
+
+	return 0;
+}
+
+/**
+ * omap_rproc_start_timer() - start a timer for a remoteproc
+ * @timer: handle to a OMAP rproc timer
+ *
+ * This helper function is used to start a timer associated with a remoteproc,
+ * obtained using the request_timer ops. The helper function needs to be
+ * invoked by the driver to start the timer (during device initialization)
+ * or to just resume the timer.
+ *
+ * Return: 0 on success, otherwise a failure as returned by DMTimer ops
+ */
+static inline int omap_rproc_start_timer(struct omap_rproc_timer *timer)
+{
+	return timer->timer_ops->start(timer->odt);
+}
+
+/**
+ * omap_rproc_stop_timer() - stop a timer for a remoteproc
+ * @timer: handle to a OMAP rproc timer
+ *
+ * This helper function is used to disable a timer associated with a
+ * remoteproc, and needs to be called either during a device shutdown
+ * or suspend operation. The separate helper function allows the driver
+ * to just stop a timer without having to release the timer during a
+ * suspend operation.
+ *
+ * Return: 0 on success, otherwise a failure as returned by DMTimer ops
+ */
+static inline int omap_rproc_stop_timer(struct omap_rproc_timer *timer)
+{
+	return timer->timer_ops->stop(timer->odt);
+}
+
+/**
+ * omap_rproc_release_timer() - release a timer for a remoteproc
+ * @timer: handle to a OMAP rproc timer
+ *
+ * This helper function is used primarily to release a timer associated
+ * with a remoteproc. The dmtimer will be available for other clients to
+ * use once released.
+ *
+ * Return: 0 on success, otherwise a failure as returned by DMTimer ops
+ */
+static inline int omap_rproc_release_timer(struct omap_rproc_timer *timer)
+{
+	return timer->timer_ops->free(timer->odt);
+}
+
+/**
+ * omap_rproc_get_timer_irq() - get the irq for a timer
+ * @timer: handle to a OMAP rproc timer
+ *
+ * This function is used to get the irq associated with a watchdog timer. The
+ * function is called by the OMAP remoteproc driver to register a interrupt
+ * handler to handle watchdog events on the remote processor.
+ *
+ * Return: irq id on success, otherwise a failure as returned by DMTimer ops
+ */
+static inline int omap_rproc_get_timer_irq(struct omap_rproc_timer *timer)
+{
+	return timer->timer_ops->get_irq(timer->odt);
+}
+
+/**
+ * omap_rproc_ack_timer_irq() - acknowledge a timer irq
+ * @timer: handle to a OMAP rproc timer
+ *
+ * This function is used to clear the irq associated with a watchdog timer.
+ * The function is called by the OMAP remoteproc upon a watchdog event on the
+ * remote processor to clear the interrupt status of the watchdog timer.
+ */
+static inline void omap_rproc_ack_timer_irq(struct omap_rproc_timer *timer)
+{
+	timer->timer_ops->write_status(timer->odt, OMAP_TIMER_INT_OVERFLOW);
+}
+
+/**
+ * omap_rproc_watchdog_isr() - Watchdog ISR handler for remoteproc device
+ * @irq: IRQ number associated with a watchdog timer
+ * @data: IRQ handler data
+ *
+ * This ISR routine executes the required necessary low-level code to
+ * acknowledge a watchdog timer interrupt. There can be multiple watchdog
+ * timers associated with a rproc (like IPUs which have 2 watchdog timers,
+ * one per Cortex M3/M4 core), so a lookup has to be performed to identify
+ * the timer to acknowledge its interrupt.
+ *
+ * The function also invokes rproc_report_crash to report the watchdog event
+ * to the remoteproc driver core, to trigger a recovery.
+ *
+ * Return: IRQ_HANDLED on success, otherwise IRQ_NONE
+ */
+static irqreturn_t omap_rproc_watchdog_isr(int irq, void *data)
+{
+	struct rproc *rproc = data;
+	struct omap_rproc *oproc = rproc->priv;
+	struct device *dev = rproc->dev.parent;
+	struct omap_rproc_timer *timers = oproc->timers;
+	struct omap_rproc_timer *wd_timer = NULL;
+	int num_timers = oproc->num_timers + oproc->num_wd_timers;
+	int i;
+
+	for (i = oproc->num_timers; i < num_timers; i++) {
+		if (timers[i].irq > 0 && irq == timers[i].irq) {
+			wd_timer = &timers[i];
+			break;
+		}
+	}
+
+	if (!wd_timer) {
+		dev_err(dev, "invalid timer\n");
+		return IRQ_NONE;
+	}
+
+	omap_rproc_ack_timer_irq(wd_timer);
+
+	rproc_report_crash(rproc, RPROC_WATCHDOG);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * omap_rproc_enable_timers() - enable the timers for a remoteproc
+ * @rproc: handle of a remote processor
+ * @configure: boolean flag used to acquire and configure the timer handle
+ *
+ * This function is used primarily to enable the timers associated with
+ * a remoteproc. The configure flag is provided to allow the driver
+ * to either acquire and start a timer (during device initialization) or
+ * to just start a timer (during a resume operation).
+ *
+ * Return: 0 on success, otherwise an appropriate failure
+ */
+static int omap_rproc_enable_timers(struct rproc *rproc, bool configure)
+{
+	int i;
+	int ret = 0;
+	struct platform_device *tpdev;
+	struct dmtimer_platform_data *tpdata;
+	const struct omap_dm_timer_ops *timer_ops;
+	struct omap_rproc *oproc = rproc->priv;
+	struct omap_rproc_timer *timers = oproc->timers;
+	struct device *dev = rproc->dev.parent;
+	struct device_node *np = NULL;
+	int num_timers = oproc->num_timers + oproc->num_wd_timers;
+
+	if (!num_timers)
+		return 0;
+
+	if (!configure)
+		goto start_timers;
+
+	for (i = 0; i < num_timers; i++) {
+		if (i < oproc->num_timers)
+			np = of_parse_phandle(dev->of_node, "ti,timers", i);
+		else
+			np = of_parse_phandle(dev->of_node,
+					      "ti,watchdog-timers",
+					      (i - oproc->num_timers));
+		if (!np) {
+			ret = -ENXIO;
+			dev_err(dev, "device node lookup for timer at index %d failed: %d\n",
+				i < oproc->num_timers ? i :
+				i - oproc->num_timers, ret);
+			goto free_timers;
+		}
+
+		tpdev = of_find_device_by_node(np);
+		if (!tpdev) {
+			ret = -ENODEV;
+			dev_err(dev, "could not get timer platform device\n");
+			goto put_node;
+		}
+
+		tpdata = dev_get_platdata(&tpdev->dev);
+		put_device(&tpdev->dev);
+		if (!tpdata) {
+			ret = -EINVAL;
+			dev_err(dev, "dmtimer pdata structure NULL\n");
+			goto put_node;
+		}
+
+		timer_ops = tpdata->timer_ops;
+		if (!timer_ops || !timer_ops->request_by_node ||
+		    !timer_ops->set_source || !timer_ops->set_load ||
+		    !timer_ops->free || !timer_ops->start ||
+		    !timer_ops->stop || !timer_ops->get_irq ||
+		    !timer_ops->write_status) {
+			ret = -EINVAL;
+			dev_err(dev, "device does not have required timer ops\n");
+			goto put_node;
+		}
+
+		timers[i].irq = -1;
+		timers[i].timer_ops = timer_ops;
+		ret = omap_rproc_request_timer(dev, np, &timers[i]);
+		if (ret) {
+			dev_err(dev, "request for timer %p failed: %d\n", np,
+				ret);
+			goto put_node;
+		}
+		of_node_put(np);
+
+		if (i >= oproc->num_timers) {
+			timers[i].irq = omap_rproc_get_timer_irq(&timers[i]);
+			if (timers[i].irq < 0) {
+				dev_err(dev, "get_irq for timer %p failed: %d\n",
+					np, timers[i].irq);
+				ret = -EBUSY;
+				goto free_timers;
+			}
+
+			ret = request_irq(timers[i].irq,
+					  omap_rproc_watchdog_isr, IRQF_SHARED,
+					  "rproc-wdt", rproc);
+			if (ret) {
+				dev_err(dev, "error requesting irq for timer %p\n",
+					np);
+				omap_rproc_release_timer(&timers[i]);
+				timers[i].odt = NULL;
+				timers[i].timer_ops = NULL;
+				timers[i].irq = -1;
+				goto free_timers;
+			}
+		}
+	}
+
+start_timers:
+	for (i = 0; i < num_timers; i++) {
+		ret = omap_rproc_start_timer(&timers[i]);
+		if (ret) {
+			dev_err(dev, "start timer %p failed failed: %d\n", np,
+				ret);
+			break;
+		}
+	}
+	if (ret) {
+		while (i >= 0) {
+			omap_rproc_stop_timer(&timers[i]);
+			i--;
+		}
+		goto put_node;
+	}
+	return 0;
+
+put_node:
+	if (configure)
+		of_node_put(np);
+free_timers:
+	while (i--) {
+		if (i >= oproc->num_timers)
+			free_irq(timers[i].irq, rproc);
+		omap_rproc_release_timer(&timers[i]);
+		timers[i].odt = NULL;
+		timers[i].timer_ops = NULL;
+		timers[i].irq = -1;
+	}
+
+	return ret;
+}
+
+/**
+ * omap_rproc_disable_timers() - disable the timers for a remoteproc
+ * @rproc: handle of a remote processor
+ * @configure: boolean flag used to release the timer handle
+ *
+ * This function is used primarily to disable the timers associated with
+ * a remoteproc. The configure flag is provided to allow the driver
+ * to either stop and release a timer (during device shutdown) or to just
+ * stop a timer (during a suspend operation).
+ *
+ * Return: 0 on success or no timers
+ */
+static int omap_rproc_disable_timers(struct rproc *rproc, bool configure)
+{
+	int i;
+	struct omap_rproc *oproc = rproc->priv;
+	struct omap_rproc_timer *timers = oproc->timers;
+	int num_timers = oproc->num_timers + oproc->num_wd_timers;
+
+	if (!num_timers)
+		return 0;
+
+	for (i = 0; i < num_timers; i++) {
+		omap_rproc_stop_timer(&timers[i]);
+		if (configure) {
+			if (i >= oproc->num_timers)
+				free_irq(timers[i].irq, rproc);
+			omap_rproc_release_timer(&timers[i]);
+			timers[i].odt = NULL;
+			timers[i].timer_ops = NULL;
+			timers[i].irq = -1;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * omap_rproc_mbox_callback() - inbound mailbox message handler
+ * @client: mailbox client pointer used for requesting the mailbox channel
+ * @data: mailbox payload
+ *
+ * This handler is invoked by omap's mailbox driver whenever a mailbox
+ * message is received. Usually, the mailbox payload simply contains
+ * the index of the virtqueue that is kicked by the remote processor,
+ * and we let remoteproc core handle it.
+ *
+ * In addition to virtqueue indices, we also have some out-of-band values
+ * that indicates different events. Those values are deliberately very
+ * big so they don't coincide with virtqueue indices.
+ */
+static void omap_rproc_mbox_callback(struct mbox_client *client, void *data)
+{
+	struct omap_rproc *oproc = container_of(client, struct omap_rproc,
+						client);
+	struct device *dev = oproc->rproc->dev.parent;
+	const char *name = oproc->rproc->name;
+	u32 msg = (u32)data;
+
+	dev_dbg(dev, "mbox msg: 0x%x\n", msg);
+
+	switch (msg) {
+	case RP_MBOX_CRASH:
+		/*
+		 * remoteproc detected an exception, notify the rproc core.
+		 * The remoteproc core will handle the recovery.
+		 */
+		dev_err(dev, "omap rproc %s crashed\n", name);
+		rproc_report_crash(oproc->rproc, RPROC_FATAL_ERROR);
+		break;
+	case RP_MBOX_ECHO_REPLY:
+		dev_info(dev, "received echo reply from %s\n", name);
+		break;
+	case RP_MBOX_SUSPEND_ACK:
+	case RP_MBOX_SUSPEND_CANCEL:
+		oproc->suspend_acked = msg == RP_MBOX_SUSPEND_ACK;
+		complete(&oproc->pm_comp);
+		break;
+	default:
+		if (msg >= RP_MBOX_READY && msg < RP_MBOX_END_MSG)
+			return;
+		if (msg > oproc->rproc->max_notifyid) {
+			dev_dbg(dev, "dropping unknown message 0x%x", msg);
+			return;
+		}
+		/* msg contains the index of the triggered vring */
+		if (rproc_vq_interrupt(oproc->rproc, msg) == IRQ_NONE)
+			dev_dbg(dev, "no message was found in vqid %d\n", msg);
+	}
+}
+
+/* kick a virtqueue */
+static void omap_rproc_kick(struct rproc *rproc, int vqid)
+{
+	struct omap_rproc *oproc = rproc->priv;
+	struct device *dev = rproc->dev.parent;
+	int ret;
+
+	/* wake up the rproc before kicking it */
+	ret = pm_runtime_get_sync(dev);
+	if (WARN_ON(ret < 0)) {
+		dev_err(dev, "pm_runtime_get_sync() failed during kick, ret = %d\n",
+			ret);
+		pm_runtime_put_noidle(dev);
+		return;
+	}
+
+	/* send the index of the triggered virtqueue in the mailbox payload */
+	ret = mbox_send_message(oproc->mbox, (void *)vqid);
+	if (ret < 0)
+		dev_err(dev, "failed to send mailbox message, status = %d\n",
+			ret);
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+}
+
+/**
+ * omap_rproc_write_dsp_boot_addr() - set boot address for DSP remote processor
+ * @rproc: handle of a remote processor
+ *
+ * Set boot address for a supported DSP remote processor.
+ *
+ * Return: 0 on success, or -EINVAL if boot address is not aligned properly
+ */
+static int omap_rproc_write_dsp_boot_addr(struct rproc *rproc)
+{
+	struct device *dev = rproc->dev.parent;
+	struct omap_rproc *oproc = rproc->priv;
+	struct omap_rproc_boot_data *bdata = oproc->boot_data;
+	u32 offset = bdata->boot_reg;
+	u32 value;
+	u32 mask;
+
+	if (rproc->bootaddr & (SZ_1K - 1)) {
+		dev_err(dev, "invalid boot address 0x%llx, must be aligned on a 1KB boundary\n",
+			rproc->bootaddr);
+		return -EINVAL;
+	}
+
+	value = rproc->bootaddr >> bdata->boot_reg_shift;
+	mask = ~(SZ_1K - 1) >> bdata->boot_reg_shift;
+
+	return regmap_update_bits(bdata->syscon, offset, mask, value);
+}
+
+/*
+ * Power up the remote processor.
+ *
+ * This function will be invoked only after the firmware for this rproc
+ * was loaded, parsed successfully, and all of its resource requirements
+ * were met.
+ */
+static int omap_rproc_start(struct rproc *rproc)
+{
+	struct omap_rproc *oproc = rproc->priv;
+	struct device *dev = rproc->dev.parent;
+	int ret;
+	struct mbox_client *client = &oproc->client;
+
+	if (oproc->boot_data) {
+		ret = omap_rproc_write_dsp_boot_addr(rproc);
+		if (ret)
+			return ret;
+	}
+
+	client->dev = dev;
+	client->tx_done = NULL;
+	client->rx_callback = omap_rproc_mbox_callback;
+	client->tx_block = false;
+	client->knows_txdone = false;
+
+	oproc->mbox = mbox_request_channel(client, 0);
+	if (IS_ERR(oproc->mbox)) {
+		ret = -EBUSY;
+		dev_err(dev, "mbox_request_channel failed: %ld\n",
+			PTR_ERR(oproc->mbox));
+		return ret;
+	}
+
+	/*
+	 * Ping the remote processor. this is only for sanity-sake;
+	 * there is no functional effect whatsoever.
+	 *
+	 * Note that the reply will _not_ arrive immediately: this message
+	 * will wait in the mailbox fifo until the remote processor is booted.
+	 */
+	ret = mbox_send_message(oproc->mbox, (void *)RP_MBOX_ECHO_REQUEST);
+	if (ret < 0) {
+		dev_err(dev, "mbox_send_message failed: %d\n", ret);
+		goto put_mbox;
+	}
+
+	ret = omap_rproc_enable_timers(rproc, true);
+	if (ret) {
+		dev_err(dev, "omap_rproc_enable_timers failed: %d\n", ret);
+		goto put_mbox;
+	}
+
+	ret = reset_control_deassert(oproc->reset);
+	if (ret) {
+		dev_err(dev, "reset control deassert failed: %d\n", ret);
+		goto disable_timers;
+	}
+
+	/*
+	 * remote processor is up, so update the runtime pm status and
+	 * enable the auto-suspend. The device usage count is incremented
+	 * manually for balancing it for auto-suspend
+	 */
+	pm_runtime_set_active(dev);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_get_noresume(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return 0;
+
+disable_timers:
+	omap_rproc_disable_timers(rproc, true);
+put_mbox:
+	mbox_free_channel(oproc->mbox);
+	return ret;
+}
+
+/* power off the remote processor */
+static int omap_rproc_stop(struct rproc *rproc)
+{
+	struct device *dev = rproc->dev.parent;
+	struct omap_rproc *oproc = rproc->priv;
+	int ret;
+
+	/*
+	 * cancel any possible scheduled runtime suspend by incrementing
+	 * the device usage count, and resuming the device. The remoteproc
+	 * also needs to be woken up if suspended, to avoid the remoteproc
+	 * OS to continue to remember any context that it has saved, and
+	 * avoid potential issues in misindentifying a subsequent device
+	 * reboot as a power restore boot
+	 */
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(dev);
+		return ret;
+	}
+
+	ret = reset_control_assert(oproc->reset);
+	if (ret)
+		goto out;
+
+	ret = omap_rproc_disable_timers(rproc, true);
+	if (ret)
+		goto enable_device;
+
+	mbox_free_channel(oproc->mbox);
+
+	/*
+	 * update the runtime pm states and status now that the remoteproc
+	 * has stopped
+	 */
+	pm_runtime_disable(dev);
+	pm_runtime_dont_use_autosuspend(dev);
+	pm_runtime_put_noidle(dev);
+	pm_runtime_set_suspended(dev);
+
+	return 0;
+
+enable_device:
+	reset_control_deassert(oproc->reset);
+out:
+	/* schedule the next auto-suspend */
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+	return ret;
+}
+
+/**
+ * omap_rproc_da_to_va() - internal memory translation helper
+ * @rproc: remote processor to apply the address translation for
+ * @da: device address to translate
+ * @len: length of the memory buffer
+ *
+ * Custom function implementing the rproc .da_to_va ops to provide address
+ * translation (device address to kernel virtual address) for internal RAMs
+ * present in a DSP or IPU device). The translated addresses can be used
+ * either by the remoteproc core for loading, or by any rpmsg bus drivers.
+ *
+ * Return: translated virtual address in kernel memory space on success,
+ *         or NULL on failure.
+ */
+static void *omap_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
+{
+	struct omap_rproc *oproc = rproc->priv;
+	int i;
+	u32 offset;
+
+	if (len <= 0)
+		return NULL;
+
+	if (!oproc->num_mems)
+		return NULL;
+
+	for (i = 0; i < oproc->num_mems; i++) {
+		if (da >= oproc->mem[i].dev_addr && da + len <=
+		    oproc->mem[i].dev_addr + oproc->mem[i].size) {
+			offset = da - oproc->mem[i].dev_addr;
+			/* __force to make sparse happy with type conversion */
+			return (__force void *)(oproc->mem[i].cpu_addr +
+						offset);
+		}
+	}
+
+	return NULL;
+}
+
+static const struct rproc_ops omap_rproc_ops = {
+	.start		= omap_rproc_start,
+	.stop		= omap_rproc_stop,
+	.kick		= omap_rproc_kick,
+	.da_to_va	= omap_rproc_da_to_va,
+};
+
+#ifdef CONFIG_PM
+static bool _is_rproc_in_standby(struct omap_rproc *oproc)
+{
+	return ti_clk_is_in_standby(oproc->fck);
+}
+
+/* 1 sec is long enough time to let the remoteproc side suspend the device */
+#define DEF_SUSPEND_TIMEOUT 1000
+static int _omap_rproc_suspend(struct rproc *rproc, bool auto_suspend)
+{
+	struct device *dev = rproc->dev.parent;
+	struct omap_rproc *oproc = rproc->priv;
+	unsigned long to = msecs_to_jiffies(DEF_SUSPEND_TIMEOUT);
+	unsigned long ta = jiffies + to;
+	u32 suspend_msg = auto_suspend ?
+				RP_MBOX_SUSPEND_AUTO : RP_MBOX_SUSPEND_SYSTEM;
+	int ret;
+
+	reinit_completion(&oproc->pm_comp);
+	oproc->suspend_acked = false;
+	ret = mbox_send_message(oproc->mbox, (void *)suspend_msg);
+	if (ret < 0) {
+		dev_err(dev, "PM mbox_send_message failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = wait_for_completion_timeout(&oproc->pm_comp, to);
+	if (!oproc->suspend_acked)
+		return -EBUSY;
+
+	/*
+	 * The remoteproc side is returning the ACK message before saving the
+	 * context, because the context saving is performed within a SYS/BIOS
+	 * function, and it cannot have any inter-dependencies against the IPC
+	 * layer. Also, as the SYS/BIOS needs to preserve properly the processor
+	 * register set, sending this ACK or signalling the completion of the
+	 * context save through a shared memory variable can never be the
+	 * absolute last thing to be executed on the remoteproc side, and the
+	 * MPU cannot use the ACK message as a sync point to put the remoteproc
+	 * into reset. The only way to ensure that the remote processor has
+	 * completed saving the context is to check that the module has reached
+	 * STANDBY state (after saving the context, the SYS/BIOS executes the
+	 * appropriate target-specific WFI instruction causing the module to
+	 * enter STANDBY).
+	 */
+	while (!_is_rproc_in_standby(oproc)) {
+		if (time_after(jiffies, ta))
+			return -ETIME;
+		schedule();
+	}
+
+	ret = reset_control_assert(oproc->reset);
+	if (ret) {
+		dev_err(dev, "reset assert during suspend failed %d\n", ret);
+		return ret;
+	}
+
+	ret = omap_rproc_disable_timers(rproc, false);
+	if (ret) {
+		dev_err(dev, "disabling timers during suspend failed %d\n",
+			ret);
+		goto enable_device;
+	}
+
+	/*
+	 * IOMMUs would have to be disabled specifically for runtime suspend.
+	 * They are handled automatically through System PM callbacks for
+	 * regular system suspend
+	 */
+	if (auto_suspend) {
+		ret = omap_iommu_domain_deactivate(rproc->domain);
+		if (ret) {
+			dev_err(dev, "iommu domain deactivate failed %d\n",
+				ret);
+			goto enable_timers;
+		}
+	}
+
+	return 0;
+
+enable_timers:
+	/* ignore errors on re-enabling code */
+	omap_rproc_enable_timers(rproc, false);
+enable_device:
+	reset_control_deassert(oproc->reset);
+	return ret;
+}
+
+static int _omap_rproc_resume(struct rproc *rproc, bool auto_suspend)
+{
+	struct device *dev = rproc->dev.parent;
+	struct omap_rproc *oproc = rproc->priv;
+	int ret;
+
+	/*
+	 * IOMMUs would have to be enabled specifically for runtime resume.
+	 * They would have been already enabled automatically through System
+	 * PM callbacks for regular system resume
+	 */
+	if (auto_suspend) {
+		ret = omap_iommu_domain_activate(rproc->domain);
+		if (ret) {
+			dev_err(dev, "omap_iommu activate failed %d\n", ret);
+			goto out;
+		}
+	}
+
+	/* boot address could be lost after suspend, so restore it */
+	if (oproc->boot_data) {
+		ret = omap_rproc_write_dsp_boot_addr(rproc);
+		if (ret) {
+			dev_err(dev, "boot address restore failed %d\n", ret);
+			goto suspend_iommu;
+		}
+	}
+
+	ret = omap_rproc_enable_timers(rproc, false);
+	if (ret) {
+		dev_err(dev, "enabling timers during resume failed %d\n", ret);
+		goto suspend_iommu;
+	}
+
+	ret = reset_control_deassert(oproc->reset);
+	if (ret) {
+		dev_err(dev, "reset deassert during resume failed %d\n", ret);
+		goto disable_timers;
+	}
+
+	return 0;
+
+disable_timers:
+	omap_rproc_disable_timers(rproc, false);
+suspend_iommu:
+	if (auto_suspend)
+		omap_iommu_domain_deactivate(rproc->domain);
+out:
+	return ret;
+}
+
+static int __maybe_unused omap_rproc_suspend(struct device *dev)
+{
+	struct rproc *rproc = dev_get_drvdata(dev);
+	struct omap_rproc *oproc = rproc->priv;
+	int ret = 0;
+
+	mutex_lock(&rproc->lock);
+	if (rproc->state == RPROC_OFFLINE)
+		goto out;
+
+	if (rproc->state == RPROC_SUSPENDED)
+		goto out;
+
+	if (rproc->state != RPROC_RUNNING) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = _omap_rproc_suspend(rproc, false);
+	if (ret) {
+		dev_err(dev, "suspend failed %d\n", ret);
+		goto out;
+	}
+
+	/*
+	 * remoteproc is running at the time of system suspend, so remember
+	 * it so as to wake it up during system resume
+	 */
+	oproc->need_resume = true;
+	rproc->state = RPROC_SUSPENDED;
+
+out:
+	mutex_unlock(&rproc->lock);
+	return ret;
+}
+
+static int __maybe_unused omap_rproc_resume(struct device *dev)
+{
+	struct rproc *rproc = dev_get_drvdata(dev);
+	struct omap_rproc *oproc = rproc->priv;
+	int ret = 0;
+
+	mutex_lock(&rproc->lock);
+	if (rproc->state == RPROC_OFFLINE)
+		goto out;
+
+	if (rproc->state != RPROC_SUSPENDED) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	/*
+	 * remoteproc was auto-suspended at the time of system suspend,
+	 * so no need to wake-up the processor (leave it in suspended
+	 * state, will be woken up during a subsequent runtime_resume)
+	 */
+	if (!oproc->need_resume)
+		goto out;
+
+	ret = _omap_rproc_resume(rproc, false);
+	if (ret) {
+		dev_err(dev, "resume failed %d\n", ret);
+		goto out;
+	}
+
+	oproc->need_resume = false;
+	rproc->state = RPROC_RUNNING;
+
+	pm_runtime_mark_last_busy(dev);
+out:
+	mutex_unlock(&rproc->lock);
+	return ret;
+}
+
+static int omap_rproc_runtime_suspend(struct device *dev)
+{
+	struct rproc *rproc = dev_get_drvdata(dev);
+	struct omap_rproc *oproc = rproc->priv;
+	int ret;
+
+	mutex_lock(&rproc->lock);
+	if (rproc->state == RPROC_CRASHED) {
+		dev_dbg(dev, "rproc cannot be runtime suspended when crashed!\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	if (WARN_ON(rproc->state != RPROC_RUNNING)) {
+		dev_err(dev, "rproc cannot be runtime suspended when not running!\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	/*
+	 * do not even attempt suspend if the remote processor is not
+	 * idled for runtime auto-suspend
+	 */
+	if (!_is_rproc_in_standby(oproc)) {
+		ret = -EBUSY;
+		goto abort;
+	}
+
+	ret = _omap_rproc_suspend(rproc, true);
+	if (ret)
+		goto abort;
+
+	rproc->state = RPROC_SUSPENDED;
+	mutex_unlock(&rproc->lock);
+	return 0;
+
+abort:
+	pm_runtime_mark_last_busy(dev);
+out:
+	mutex_unlock(&rproc->lock);
+	return ret;
+}
+
+static int omap_rproc_runtime_resume(struct device *dev)
+{
+	struct rproc *rproc = dev_get_drvdata(dev);
+	int ret;
+
+	mutex_lock(&rproc->lock);
+	if (WARN_ON(rproc->state != RPROC_SUSPENDED)) {
+		dev_err(dev, "rproc cannot be runtime resumed if not suspended! state=%d\n",
+			rproc->state);
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = _omap_rproc_resume(rproc, true);
+	if (ret) {
+		dev_err(dev, "runtime resume failed %d\n", ret);
+		goto out;
+	}
+
+	rproc->state = RPROC_RUNNING;
+out:
+	mutex_unlock(&rproc->lock);
+	return ret;
+}
+#endif /* CONFIG_PM */
+
+static const struct omap_rproc_mem_data ipu_mems[] = {
+	{ .name = "l2ram", .dev_addr = 0x20000000 },
+	{ },
+};
+
+static const struct omap_rproc_mem_data dra7_dsp_mems[] = {
+	{ .name = "l2ram", .dev_addr = 0x800000 },
+	{ .name = "l1pram", .dev_addr = 0xe00000 },
+	{ .name = "l1dram", .dev_addr = 0xf00000 },
+	{ },
+};
+
+static const struct omap_rproc_dev_data omap4_dsp_dev_data = {
+	.device_name	= "dsp",
+};
+
+static const struct omap_rproc_dev_data omap4_ipu_dev_data = {
+	.device_name	= "ipu",
+	.mems		= ipu_mems,
+};
+
+static const struct omap_rproc_dev_data omap5_dsp_dev_data = {
+	.device_name	= "dsp",
+};
+
+static const struct omap_rproc_dev_data omap5_ipu_dev_data = {
+	.device_name	= "ipu",
+	.mems		= ipu_mems,
+};
+
+static const struct omap_rproc_dev_data dra7_dsp_dev_data = {
+	.device_name	= "dsp",
+	.mems		= dra7_dsp_mems,
+};
+
+static const struct omap_rproc_dev_data dra7_ipu_dev_data = {
+	.device_name	= "ipu",
+	.mems		= ipu_mems,
+};
+
+static const struct of_device_id omap_rproc_of_match[] = {
+	{
+		.compatible     = "ti,omap4-dsp",
+		.data           = &omap4_dsp_dev_data,
+	},
+	{
+		.compatible     = "ti,omap4-ipu",
+		.data           = &omap4_ipu_dev_data,
+	},
+	{
+		.compatible     = "ti,omap5-dsp",
+		.data           = &omap5_dsp_dev_data,
+	},
+	{
+		.compatible     = "ti,omap5-ipu",
+		.data           = &omap5_ipu_dev_data,
+	},
+	{
+		.compatible     = "ti,dra7-dsp",
+		.data           = &dra7_dsp_dev_data,
+	},
+	{
+		.compatible     = "ti,dra7-ipu",
+		.data           = &dra7_ipu_dev_data,
+	},
+	{
+		/* end */
+	},
+};
+MODULE_DEVICE_TABLE(of, omap_rproc_of_match);
+
+static const char *omap_rproc_get_firmware(struct platform_device *pdev)
+{
+	const char *fw_name;
+	int ret;
+
+	ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
+				      &fw_name);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return fw_name;
+}
+
+static int omap_rproc_get_boot_data(struct platform_device *pdev,
+				    struct rproc *rproc)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct omap_rproc *oproc = rproc->priv;
+	const struct omap_rproc_dev_data *data;
+	int ret;
+
+	data = of_device_get_match_data(&pdev->dev);
+	if (!data)
+		return -ENODEV;
+
+	if (!of_property_read_bool(np, "ti,bootreg"))
+		return 0;
+
+	oproc->boot_data = devm_kzalloc(&pdev->dev, sizeof(*oproc->boot_data),
+					GFP_KERNEL);
+	if (!oproc->boot_data)
+		return -ENOMEM;
+
+	oproc->boot_data->syscon =
+			syscon_regmap_lookup_by_phandle(np, "ti,bootreg");
+	if (IS_ERR(oproc->boot_data->syscon)) {
+		ret = PTR_ERR(oproc->boot_data->syscon);
+		return ret;
+	}
+
+	if (of_property_read_u32_index(np, "ti,bootreg", 1,
+				       &oproc->boot_data->boot_reg)) {
+		dev_err(&pdev->dev, "couldn't get the boot register\n");
+		return -EINVAL;
+	}
+
+	of_property_read_u32_index(np, "ti,bootreg", 2,
+				   &oproc->boot_data->boot_reg_shift);
+
+	return 0;
+}
+
+static int omap_rproc_of_get_internal_memories(struct platform_device *pdev,
+					       struct rproc *rproc)
+{
+	struct omap_rproc *oproc = rproc->priv;
+	struct device *dev = &pdev->dev;
+	const struct omap_rproc_dev_data *data;
+	struct resource *res;
+	int num_mems;
+	int i;
+
+	data = of_device_get_match_data(dev);
+	if (!data)
+		return -ENODEV;
+
+	if (!data->mems)
+		return 0;
+
+	num_mems = of_property_count_elems_of_size(dev->of_node, "reg",
+						   sizeof(u32)) / 2;
+
+	oproc->mem = devm_kcalloc(dev, num_mems, sizeof(*oproc->mem),
+				  GFP_KERNEL);
+	if (!oproc->mem)
+		return -ENOMEM;
+
+	for (i = 0; data->mems[i].name; i++) {
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						   data->mems[i].name);
+		if (!res) {
+			dev_err(dev, "no memory defined for %s\n",
+				data->mems[i].name);
+			return -ENOMEM;
+		}
+		oproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
+		if (IS_ERR(oproc->mem[i].cpu_addr)) {
+			dev_err(dev, "failed to parse and map %s memory\n",
+				data->mems[i].name);
+			return PTR_ERR(oproc->mem[i].cpu_addr);
+		}
+		oproc->mem[i].bus_addr = res->start;
+		oproc->mem[i].dev_addr = data->mems[i].dev_addr;
+		oproc->mem[i].size = resource_size(res);
+
+		dev_dbg(dev, "memory %8s: bus addr %pa size 0x%x va %pK da 0x%x\n",
+			data->mems[i].name, &oproc->mem[i].bus_addr,
+			oproc->mem[i].size, oproc->mem[i].cpu_addr,
+			oproc->mem[i].dev_addr);
+	}
+	oproc->num_mems = num_mems;
+
+	return 0;
+}
+
+#ifdef CONFIG_OMAP_REMOTEPROC_WATCHDOG
+static int omap_rproc_count_wdog_timers(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	ret = of_count_phandle_with_args(np, "ti,watchdog-timers", NULL);
+	if (ret <= 0) {
+		dev_dbg(dev, "device does not have watchdog timers, status = %d\n",
+			ret);
+		ret = 0;
+	}
+
+	return ret;
+}
+#else
+static int omap_rproc_count_wdog_timers(struct device *dev)
+{
+	return 0;
+}
+#endif
+
+static int omap_rproc_of_get_timers(struct platform_device *pdev,
+				    struct rproc *rproc)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct omap_rproc *oproc = rproc->priv;
+	struct device *dev = &pdev->dev;
+	int num_timers;
+
+	/*
+	 * Timer nodes are directly used in client nodes as phandles, so
+	 * retrieve the count using appropriate size
+	 */
+	oproc->num_timers = of_count_phandle_with_args(np, "ti,timers", NULL);
+	if (oproc->num_timers <= 0) {
+		dev_dbg(dev, "device does not have timers, status = %d\n",
+			oproc->num_timers);
+		oproc->num_timers = 0;
+	}
+
+	oproc->num_wd_timers = omap_rproc_count_wdog_timers(dev);
+
+	num_timers = oproc->num_timers + oproc->num_wd_timers;
+	if (num_timers) {
+		oproc->timers = devm_kcalloc(dev, num_timers,
+					     sizeof(*oproc->timers),
+					     GFP_KERNEL);
+		if (!oproc->timers)
+			return -ENOMEM;
+
+		dev_dbg(dev, "device has %d tick timers and %d watchdog timers\n",
+			oproc->num_timers, oproc->num_wd_timers);
+	}
+
+	return 0;
+}
+
+static int omap_rproc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct omap_rproc *oproc;
+	struct rproc *rproc;
+	const char *firmware;
+	int ret;
+	struct reset_control *reset;
+
+	if (!np) {
+		dev_err(&pdev->dev, "only DT-based devices are supported\n");
+		return -ENODEV;
+	}
+
+	reset = devm_reset_control_array_get_exclusive(&pdev->dev);
+	if (IS_ERR(reset))
+		return PTR_ERR(reset);
+
+	firmware = omap_rproc_get_firmware(pdev);
+	if (IS_ERR(firmware))
+		return PTR_ERR(firmware);
+
+	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n", ret);
+		return ret;
+	}
+
+	rproc = rproc_alloc(&pdev->dev, dev_name(&pdev->dev), &omap_rproc_ops,
+			    firmware, sizeof(*oproc));
+	if (!rproc)
+		return -ENOMEM;
+
+	oproc = rproc->priv;
+	oproc->rproc = rproc;
+	oproc->reset = reset;
+	/* All existing OMAP IPU and DSP processors have an MMU */
+	rproc->has_iommu = true;
+
+	ret = omap_rproc_of_get_internal_memories(pdev, rproc);
+	if (ret)
+		goto free_rproc;
+
+	ret = omap_rproc_get_boot_data(pdev, rproc);
+	if (ret)
+		goto free_rproc;
+
+	ret = omap_rproc_of_get_timers(pdev, rproc);
+	if (ret)
+		goto free_rproc;
+
+	init_completion(&oproc->pm_comp);
+	oproc->autosuspend_delay = DEFAULT_AUTOSUSPEND_DELAY;
+
+	of_property_read_u32(pdev->dev.of_node, "ti,autosuspend-delay-ms",
+			     &oproc->autosuspend_delay);
+
+	pm_runtime_set_autosuspend_delay(&pdev->dev, oproc->autosuspend_delay);
+
+	oproc->fck = devm_clk_get(&pdev->dev, 0);
+	if (IS_ERR(oproc->fck)) {
+		ret = PTR_ERR(oproc->fck);
+		goto free_rproc;
+	}
+
+	ret = of_reserved_mem_device_init(&pdev->dev);
+	if (ret) {
+		dev_warn(&pdev->dev, "device does not have specific CMA pool.\n");
+		dev_warn(&pdev->dev, "Typically this should be provided,\n");
+		dev_warn(&pdev->dev, "only omit if you know what you are doing.\n");
+	}
+
+	platform_set_drvdata(pdev, rproc);
+
+	ret = rproc_add(rproc);
+	if (ret)
+		goto release_mem;
+
+	return 0;
+
+release_mem:
+	of_reserved_mem_device_release(&pdev->dev);
+free_rproc:
+	rproc_free(rproc);
+	return ret;
+}
+
+static int omap_rproc_remove(struct platform_device *pdev)
+{
+	struct rproc *rproc = platform_get_drvdata(pdev);
+
+	rproc_del(rproc);
+	rproc_free(rproc);
+	of_reserved_mem_device_release(&pdev->dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops omap_rproc_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(omap_rproc_suspend, omap_rproc_resume)
+	SET_RUNTIME_PM_OPS(omap_rproc_runtime_suspend,
+			   omap_rproc_runtime_resume, NULL)
+};
+
+static struct platform_driver omap_rproc_driver = {
+	.probe = omap_rproc_probe,
+	.remove = omap_rproc_remove,
+	.driver = {
+		.name = "omap-rproc",
+		.pm = &omap_rproc_pm_ops,
+		.of_match_table = omap_rproc_of_match,
+	},
+};
+
+module_platform_driver(omap_rproc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("OMAP Remote Processor control driver");