Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 920 insertions, 0 deletions

diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
new file mode 100644
index 000000000..128bf9912
--- /dev/null
+++ b/drivers/remoteproc/pru_rproc.c
@@ -0,0 +1,920 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PRU-ICSS remoteproc driver for various TI SoCs
+ *
+ * Copyright (C) 2014-2020 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Author(s):
+ *	Suman Anna <s-anna@ti.com>
+ *	Andrew F. Davis <afd@ti.com>
+ *	Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> for Texas Instruments
+ */
+
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pruss_driver.h>
+#include <linux/remoteproc.h>
+
+#include "remoteproc_internal.h"
+#include "remoteproc_elf_helpers.h"
+#include "pru_rproc.h"
+
+/* PRU_ICSS_PRU_CTRL registers */
+#define PRU_CTRL_CTRL		0x0000
+#define PRU_CTRL_STS		0x0004
+#define PRU_CTRL_WAKEUP_EN	0x0008
+#define PRU_CTRL_CYCLE		0x000C
+#define PRU_CTRL_STALL		0x0010
+#define PRU_CTRL_CTBIR0		0x0020
+#define PRU_CTRL_CTBIR1		0x0024
+#define PRU_CTRL_CTPPR0		0x0028
+#define PRU_CTRL_CTPPR1		0x002C
+
+/* CTRL register bit-fields */
+#define CTRL_CTRL_SOFT_RST_N	BIT(0)
+#define CTRL_CTRL_EN		BIT(1)
+#define CTRL_CTRL_SLEEPING	BIT(2)
+#define CTRL_CTRL_CTR_EN	BIT(3)
+#define CTRL_CTRL_SINGLE_STEP	BIT(8)
+#define CTRL_CTRL_RUNSTATE	BIT(15)
+
+/* PRU_ICSS_PRU_DEBUG registers */
+#define PRU_DEBUG_GPREG(x)	(0x0000 + (x) * 4)
+#define PRU_DEBUG_CT_REG(x)	(0x0080 + (x) * 4)
+
+/* PRU/RTU/Tx_PRU Core IRAM address masks */
+#define PRU_IRAM_ADDR_MASK	0x3ffff
+#define PRU0_IRAM_ADDR_MASK	0x34000
+#define PRU1_IRAM_ADDR_MASK	0x38000
+#define RTU0_IRAM_ADDR_MASK	0x4000
+#define RTU1_IRAM_ADDR_MASK	0x6000
+#define TX_PRU0_IRAM_ADDR_MASK	0xa000
+#define TX_PRU1_IRAM_ADDR_MASK	0xc000
+
+/* PRU device addresses for various type of PRU RAMs */
+#define PRU_IRAM_DA	0	/* Instruction RAM */
+#define PRU_PDRAM_DA	0	/* Primary Data RAM */
+#define PRU_SDRAM_DA	0x2000	/* Secondary Data RAM */
+#define PRU_SHRDRAM_DA	0x10000 /* Shared Data RAM */
+
+#define MAX_PRU_SYS_EVENTS 160
+
+/**
+ * enum pru_iomem - PRU core memory/register range identifiers
+ *
+ * @PRU_IOMEM_IRAM: PRU Instruction RAM range
+ * @PRU_IOMEM_CTRL: PRU Control register range
+ * @PRU_IOMEM_DEBUG: PRU Debug register range
+ * @PRU_IOMEM_MAX: just keep this one at the end
+ */
+enum pru_iomem {
+	PRU_IOMEM_IRAM = 0,
+	PRU_IOMEM_CTRL,
+	PRU_IOMEM_DEBUG,
+	PRU_IOMEM_MAX,
+};
+
+/**
+ * enum pru_type - PRU core type identifier
+ *
+ * @PRU_TYPE_PRU: Programmable Real-time Unit
+ * @PRU_TYPE_RTU: Auxiliary Programmable Real-Time Unit
+ * @PRU_TYPE_TX_PRU: Transmit Programmable Real-Time Unit
+ * @PRU_TYPE_MAX: just keep this one at the end
+ */
+enum pru_type {
+	PRU_TYPE_PRU = 0,
+	PRU_TYPE_RTU,
+	PRU_TYPE_TX_PRU,
+	PRU_TYPE_MAX,
+};
+
+/**
+ * struct pru_private_data - device data for a PRU core
+ * @type: type of the PRU core (PRU, RTU, Tx_PRU)
+ * @is_k3: flag used to identify the need for special load handling
+ */
+struct pru_private_data {
+	enum pru_type type;
+	unsigned int is_k3 : 1;
+};
+
+/**
+ * struct pru_rproc - PRU remoteproc structure
+ * @id: id of the PRU core within the PRUSS
+ * @dev: PRU core device pointer
+ * @pruss: back-reference to parent PRUSS structure
+ * @rproc: remoteproc pointer for this PRU core
+ * @data: PRU core specific data
+ * @mem_regions: data for each of the PRU memory regions
+ * @fw_name: name of firmware image used during loading
+ * @mapped_irq: virtual interrupt numbers of created fw specific mapping
+ * @pru_interrupt_map: pointer to interrupt mapping description (firmware)
+ * @pru_interrupt_map_sz: pru_interrupt_map size
+ * @dbg_single_step: debug state variable to set PRU into single step mode
+ * @dbg_continuous: debug state variable to restore PRU execution mode
+ * @evt_count: number of mapped events
+ */
+struct pru_rproc {
+	int id;
+	struct device *dev;
+	struct pruss *pruss;
+	struct rproc *rproc;
+	const struct pru_private_data *data;
+	struct pruss_mem_region mem_regions[PRU_IOMEM_MAX];
+	const char *fw_name;
+	unsigned int *mapped_irq;
+	struct pru_irq_rsc *pru_interrupt_map;
+	size_t pru_interrupt_map_sz;
+	u32 dbg_single_step;
+	u32 dbg_continuous;
+	u8 evt_count;
+};
+
+static inline u32 pru_control_read_reg(struct pru_rproc *pru, unsigned int reg)
+{
+	return readl_relaxed(pru->mem_regions[PRU_IOMEM_CTRL].va + reg);
+}
+
+static inline
+void pru_control_write_reg(struct pru_rproc *pru, unsigned int reg, u32 val)
+{
+	writel_relaxed(val, pru->mem_regions[PRU_IOMEM_CTRL].va + reg);
+}
+
+static inline u32 pru_debug_read_reg(struct pru_rproc *pru, unsigned int reg)
+{
+	return readl_relaxed(pru->mem_regions[PRU_IOMEM_DEBUG].va + reg);
+}
+
+static int regs_show(struct seq_file *s, void *data)
+{
+	struct rproc *rproc = s->private;
+	struct pru_rproc *pru = rproc->priv;
+	int i, nregs = 32;
+	u32 pru_sts;
+	int pru_is_running;
+
+	seq_puts(s, "============== Control Registers ==============\n");
+	seq_printf(s, "CTRL      := 0x%08x\n",
+		   pru_control_read_reg(pru, PRU_CTRL_CTRL));
+	pru_sts = pru_control_read_reg(pru, PRU_CTRL_STS);
+	seq_printf(s, "STS (PC)  := 0x%08x (0x%08x)\n", pru_sts, pru_sts << 2);
+	seq_printf(s, "WAKEUP_EN := 0x%08x\n",
+		   pru_control_read_reg(pru, PRU_CTRL_WAKEUP_EN));
+	seq_printf(s, "CYCLE     := 0x%08x\n",
+		   pru_control_read_reg(pru, PRU_CTRL_CYCLE));
+	seq_printf(s, "STALL     := 0x%08x\n",
+		   pru_control_read_reg(pru, PRU_CTRL_STALL));
+	seq_printf(s, "CTBIR0    := 0x%08x\n",
+		   pru_control_read_reg(pru, PRU_CTRL_CTBIR0));
+	seq_printf(s, "CTBIR1    := 0x%08x\n",
+		   pru_control_read_reg(pru, PRU_CTRL_CTBIR1));
+	seq_printf(s, "CTPPR0    := 0x%08x\n",
+		   pru_control_read_reg(pru, PRU_CTRL_CTPPR0));
+	seq_printf(s, "CTPPR1    := 0x%08x\n",
+		   pru_control_read_reg(pru, PRU_CTRL_CTPPR1));
+
+	seq_puts(s, "=============== Debug Registers ===============\n");
+	pru_is_running = pru_control_read_reg(pru, PRU_CTRL_CTRL) &
+				CTRL_CTRL_RUNSTATE;
+	if (pru_is_running) {
+		seq_puts(s, "PRU is executing, cannot print/access debug registers.\n");
+		return 0;
+	}
+
+	for (i = 0; i < nregs; i++) {
+		seq_printf(s, "GPREG%-2d := 0x%08x\tCT_REG%-2d := 0x%08x\n",
+			   i, pru_debug_read_reg(pru, PRU_DEBUG_GPREG(i)),
+			   i, pru_debug_read_reg(pru, PRU_DEBUG_CT_REG(i)));
+	}
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(regs);
+
+/*
+ * Control PRU single-step mode
+ *
+ * This is a debug helper function used for controlling the single-step
+ * mode of the PRU. The PRU Debug registers are not accessible when the
+ * PRU is in RUNNING state.
+ *
+ * Writing a non-zero value sets the PRU into single-step mode irrespective
+ * of its previous state. The PRU mode is saved only on the first set into
+ * a single-step mode. Writing a zero value will restore the PRU into its
+ * original mode.
+ */
+static int pru_rproc_debug_ss_set(void *data, u64 val)
+{
+	struct rproc *rproc = data;
+	struct pru_rproc *pru = rproc->priv;
+	u32 reg_val;
+
+	val = val ? 1 : 0;
+	if (!val && !pru->dbg_single_step)
+		return 0;
+
+	reg_val = pru_control_read_reg(pru, PRU_CTRL_CTRL);
+
+	if (val && !pru->dbg_single_step)
+		pru->dbg_continuous = reg_val;
+
+	if (val)
+		reg_val |= CTRL_CTRL_SINGLE_STEP | CTRL_CTRL_EN;
+	else
+		reg_val = pru->dbg_continuous;
+
+	pru->dbg_single_step = val;
+	pru_control_write_reg(pru, PRU_CTRL_CTRL, reg_val);
+
+	return 0;
+}
+
+static int pru_rproc_debug_ss_get(void *data, u64 *val)
+{
+	struct rproc *rproc = data;
+	struct pru_rproc *pru = rproc->priv;
+
+	*val = pru->dbg_single_step;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(pru_rproc_debug_ss_fops, pru_rproc_debug_ss_get,
+			 pru_rproc_debug_ss_set, "%llu\n");
+
+/*
+ * Create PRU-specific debugfs entries
+ *
+ * The entries are created only if the parent remoteproc debugfs directory
+ * exists, and will be cleaned up by the remoteproc core.
+ */
+static void pru_rproc_create_debug_entries(struct rproc *rproc)
+{
+	if (!rproc->dbg_dir)
+		return;
+
+	debugfs_create_file("regs", 0400, rproc->dbg_dir,
+			    rproc, &regs_fops);
+	debugfs_create_file("single_step", 0600, rproc->dbg_dir,
+			    rproc, &pru_rproc_debug_ss_fops);
+}
+
+static void pru_dispose_irq_mapping(struct pru_rproc *pru)
+{
+	if (!pru->mapped_irq)
+		return;
+
+	while (pru->evt_count) {
+		pru->evt_count--;
+		if (pru->mapped_irq[pru->evt_count] > 0)
+			irq_dispose_mapping(pru->mapped_irq[pru->evt_count]);
+	}
+
+	kfree(pru->mapped_irq);
+	pru->mapped_irq = NULL;
+}
+
+/*
+ * Parse the custom PRU interrupt map resource and configure the INTC
+ * appropriately.
+ */
+static int pru_handle_intrmap(struct rproc *rproc)
+{
+	struct device *dev = rproc->dev.parent;
+	struct pru_rproc *pru = rproc->priv;
+	struct pru_irq_rsc *rsc = pru->pru_interrupt_map;
+	struct irq_fwspec fwspec;
+	struct device_node *parent, *irq_parent;
+	int i, ret = 0;
+
+	/* not having pru_interrupt_map is not an error */
+	if (!rsc)
+		return 0;
+
+	/* currently supporting only type 0 */
+	if (rsc->type != 0) {
+		dev_err(dev, "unsupported rsc type: %d\n", rsc->type);
+		return -EINVAL;
+	}
+
+	if (rsc->num_evts > MAX_PRU_SYS_EVENTS)
+		return -EINVAL;
+
+	if (sizeof(*rsc) + rsc->num_evts * sizeof(struct pruss_int_map) !=
+	    pru->pru_interrupt_map_sz)
+		return -EINVAL;
+
+	pru->evt_count = rsc->num_evts;
+	pru->mapped_irq = kcalloc(pru->evt_count, sizeof(unsigned int),
+				  GFP_KERNEL);
+	if (!pru->mapped_irq) {
+		pru->evt_count = 0;
+		return -ENOMEM;
+	}
+
+	/*
+	 * parse and fill in system event to interrupt channel and
+	 * channel-to-host mapping. The interrupt controller to be used
+	 * for these mappings for a given PRU remoteproc is always its
+	 * corresponding sibling PRUSS INTC node.
+	 */
+	parent = of_get_parent(dev_of_node(pru->dev));
+	if (!parent) {
+		kfree(pru->mapped_irq);
+		pru->mapped_irq = NULL;
+		pru->evt_count = 0;
+		return -ENODEV;
+	}
+
+	irq_parent = of_get_child_by_name(parent, "interrupt-controller");
+	of_node_put(parent);
+	if (!irq_parent) {
+		kfree(pru->mapped_irq);
+		pru->mapped_irq = NULL;
+		pru->evt_count = 0;
+		return -ENODEV;
+	}
+
+	fwspec.fwnode = of_node_to_fwnode(irq_parent);
+	fwspec.param_count = 3;
+	for (i = 0; i < pru->evt_count; i++) {
+		fwspec.param[0] = rsc->pru_intc_map[i].event;
+		fwspec.param[1] = rsc->pru_intc_map[i].chnl;
+		fwspec.param[2] = rsc->pru_intc_map[i].host;
+
+		dev_dbg(dev, "mapping%d: event %d, chnl %d, host %d\n",
+			i, fwspec.param[0], fwspec.param[1], fwspec.param[2]);
+
+		pru->mapped_irq[i] = irq_create_fwspec_mapping(&fwspec);
+		if (!pru->mapped_irq[i]) {
+			dev_err(dev, "failed to get virq for fw mapping %d: event %d chnl %d host %d\n",
+				i, fwspec.param[0], fwspec.param[1],
+				fwspec.param[2]);
+			ret = -EINVAL;
+			goto map_fail;
+		}
+	}
+	of_node_put(irq_parent);
+
+	return ret;
+
+map_fail:
+	pru_dispose_irq_mapping(pru);
+	of_node_put(irq_parent);
+
+	return ret;
+}
+
+static int pru_rproc_start(struct rproc *rproc)
+{
+	struct device *dev = &rproc->dev;
+	struct pru_rproc *pru = rproc->priv;
+	const char *names[PRU_TYPE_MAX] = { "PRU", "RTU", "Tx_PRU" };
+	u32 val;
+	int ret;
+
+	dev_dbg(dev, "starting %s%d: entry-point = 0x%llx\n",
+		names[pru->data->type], pru->id, (rproc->bootaddr >> 2));
+
+	ret = pru_handle_intrmap(rproc);
+	/*
+	 * reset references to pru interrupt map - they will stop being valid
+	 * after rproc_start returns
+	 */
+	pru->pru_interrupt_map = NULL;
+	pru->pru_interrupt_map_sz = 0;
+	if (ret)
+		return ret;
+
+	val = CTRL_CTRL_EN | ((rproc->bootaddr >> 2) << 16);
+	pru_control_write_reg(pru, PRU_CTRL_CTRL, val);
+
+	return 0;
+}
+
+static int pru_rproc_stop(struct rproc *rproc)
+{
+	struct device *dev = &rproc->dev;
+	struct pru_rproc *pru = rproc->priv;
+	const char *names[PRU_TYPE_MAX] = { "PRU", "RTU", "Tx_PRU" };
+	u32 val;
+
+	dev_dbg(dev, "stopping %s%d\n", names[pru->data->type], pru->id);
+
+	val = pru_control_read_reg(pru, PRU_CTRL_CTRL);
+	val &= ~CTRL_CTRL_EN;
+	pru_control_write_reg(pru, PRU_CTRL_CTRL, val);
+
+	/* dispose irq mapping - new firmware can provide new mapping */
+	pru_dispose_irq_mapping(pru);
+
+	return 0;
+}
+
+/*
+ * Convert PRU device address (data spaces only) to kernel virtual address.
+ *
+ * Each PRU has access to all data memories within the PRUSS, accessible at
+ * different ranges. So, look through both its primary and secondary Data
+ * RAMs as well as any shared Data RAM to convert a PRU device address to
+ * kernel virtual address. Data RAM0 is primary Data RAM for PRU0 and Data
+ * RAM1 is primary Data RAM for PRU1.
+ */
+static void *pru_d_da_to_va(struct pru_rproc *pru, u32 da, size_t len)
+{
+	struct pruss_mem_region dram0, dram1, shrd_ram;
+	struct pruss *pruss = pru->pruss;
+	u32 offset;
+	void *va = NULL;
+
+	if (len == 0)
+		return NULL;
+
+	dram0 = pruss->mem_regions[PRUSS_MEM_DRAM0];
+	dram1 = pruss->mem_regions[PRUSS_MEM_DRAM1];
+	/* PRU1 has its local RAM addresses reversed */
+	if (pru->id == 1)
+		swap(dram0, dram1);
+	shrd_ram = pruss->mem_regions[PRUSS_MEM_SHRD_RAM2];
+
+	if (da >= PRU_PDRAM_DA && da + len <= PRU_PDRAM_DA + dram0.size) {
+		offset = da - PRU_PDRAM_DA;
+		va = (__force void *)(dram0.va + offset);
+	} else if (da >= PRU_SDRAM_DA &&
+		   da + len <= PRU_SDRAM_DA + dram1.size) {
+		offset = da - PRU_SDRAM_DA;
+		va = (__force void *)(dram1.va + offset);
+	} else if (da >= PRU_SHRDRAM_DA &&
+		   da + len <= PRU_SHRDRAM_DA + shrd_ram.size) {
+		offset = da - PRU_SHRDRAM_DA;
+		va = (__force void *)(shrd_ram.va + offset);
+	}
+
+	return va;
+}
+
+/*
+ * Convert PRU device address (instruction space) to kernel virtual address.
+ *
+ * A PRU does not have an unified address space. Each PRU has its very own
+ * private Instruction RAM, and its device address is identical to that of
+ * its primary Data RAM device address.
+ */
+static void *pru_i_da_to_va(struct pru_rproc *pru, u32 da, size_t len)
+{
+	u32 offset;
+	void *va = NULL;
+
+	if (len == 0)
+		return NULL;
+
+	/*
+	 * GNU binutils do not support multiple address spaces. The GNU
+	 * linker's default linker script places IRAM at an arbitrary high
+	 * offset, in order to differentiate it from DRAM. Hence we need to
+	 * strip the artificial offset in the IRAM addresses coming from the
+	 * ELF file.
+	 *
+	 * The TI proprietary linker would never set those higher IRAM address
+	 * bits anyway. PRU architecture limits the program counter to 16-bit
+	 * word-address range. This in turn corresponds to 18-bit IRAM
+	 * byte-address range for ELF.
+	 *
+	 * Two more bits are added just in case to make the final 20-bit mask.
+	 * Idea is to have a safeguard in case TI decides to add banking
+	 * in future SoCs.
+	 */
+	da &= 0xfffff;
+
+	if (da >= PRU_IRAM_DA &&
+	    da + len <= PRU_IRAM_DA + pru->mem_regions[PRU_IOMEM_IRAM].size) {
+		offset = da - PRU_IRAM_DA;
+		va = (__force void *)(pru->mem_regions[PRU_IOMEM_IRAM].va +
+				      offset);
+	}
+
+	return va;
+}
+
+/*
+ * Provide address translations for only PRU Data RAMs through the remoteproc
+ * core for any PRU client drivers. The PRU Instruction RAM access is restricted
+ * only to the PRU loader code.
+ */
+static void *pru_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
+{
+	struct pru_rproc *pru = rproc->priv;
+
+	return pru_d_da_to_va(pru, da, len);
+}
+
+/* PRU-specific address translator used by PRU loader. */
+static void *pru_da_to_va(struct rproc *rproc, u64 da, size_t len, bool is_iram)
+{
+	struct pru_rproc *pru = rproc->priv;
+	void *va;
+
+	if (is_iram)
+		va = pru_i_da_to_va(pru, da, len);
+	else
+		va = pru_d_da_to_va(pru, da, len);
+
+	return va;
+}
+
+static struct rproc_ops pru_rproc_ops = {
+	.start		= pru_rproc_start,
+	.stop		= pru_rproc_stop,
+	.da_to_va	= pru_rproc_da_to_va,
+};
+
+/*
+ * Custom memory copy implementation for ICSSG PRU/RTU/Tx_PRU Cores
+ *
+ * The ICSSG PRU/RTU/Tx_PRU cores have a memory copying issue with IRAM
+ * memories, that is not seen on previous generation SoCs. The data is reflected
+ * properly in the IRAM memories only for integer (4-byte) copies. Any unaligned
+ * copies result in all the other pre-existing bytes zeroed out within that
+ * 4-byte boundary, thereby resulting in wrong text/code in the IRAMs. Also, the
+ * IRAM memory port interface does not allow any 8-byte copies (as commonly used
+ * by ARM64 memcpy implementation) and throws an exception. The DRAM memory
+ * ports do not show this behavior.
+ */
+static int pru_rproc_memcpy(void *dest, const void *src, size_t count)
+{
+	const u32 *s = src;
+	u32 *d = dest;
+	size_t size = count / 4;
+	u32 *tmp_src = NULL;
+
+	/*
+	 * TODO: relax limitation of 4-byte aligned dest addresses and copy
+	 * sizes
+	 */
+	if ((long)dest % 4 || count % 4)
+		return -EINVAL;
+
+	/* src offsets in ELF firmware image can be non-aligned */
+	if ((long)src % 4) {
+		tmp_src = kmemdup(src, count, GFP_KERNEL);
+		if (!tmp_src)
+			return -ENOMEM;
+		s = tmp_src;
+	}
+
+	while (size--)
+		*d++ = *s++;
+
+	kfree(tmp_src);
+
+	return 0;
+}
+
+static int
+pru_rproc_load_elf_segments(struct rproc *rproc, const struct firmware *fw)
+{
+	struct pru_rproc *pru = rproc->priv;
+	struct device *dev = &rproc->dev;
+	struct elf32_hdr *ehdr;
+	struct elf32_phdr *phdr;
+	int i, ret = 0;
+	const u8 *elf_data = fw->data;
+
+	ehdr = (struct elf32_hdr *)elf_data;
+	phdr = (struct elf32_phdr *)(elf_data + ehdr->e_phoff);
+
+	/* go through the available ELF segments */
+	for (i = 0; i < ehdr->e_phnum; i++, phdr++) {
+		u32 da = phdr->p_paddr;
+		u32 memsz = phdr->p_memsz;
+		u32 filesz = phdr->p_filesz;
+		u32 offset = phdr->p_offset;
+		bool is_iram;
+		void *ptr;
+
+		if (phdr->p_type != PT_LOAD || !filesz)
+			continue;
+
+		dev_dbg(dev, "phdr: type %d da 0x%x memsz 0x%x filesz 0x%x\n",
+			phdr->p_type, da, memsz, filesz);
+
+		if (filesz > memsz) {
+			dev_err(dev, "bad phdr filesz 0x%x memsz 0x%x\n",
+				filesz, memsz);
+			ret = -EINVAL;
+			break;
+		}
+
+		if (offset + filesz > fw->size) {
+			dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n",
+				offset + filesz, fw->size);
+			ret = -EINVAL;
+			break;
+		}
+
+		/* grab the kernel address for this device address */
+		is_iram = phdr->p_flags & PF_X;
+		ptr = pru_da_to_va(rproc, da, memsz, is_iram);
+		if (!ptr) {
+			dev_err(dev, "bad phdr da 0x%x mem 0x%x\n", da, memsz);
+			ret = -EINVAL;
+			break;
+		}
+
+		if (pru->data->is_k3) {
+			ret = pru_rproc_memcpy(ptr, elf_data + phdr->p_offset,
+					       filesz);
+			if (ret) {
+				dev_err(dev, "PRU memory copy failed for da 0x%x memsz 0x%x\n",
+					da, memsz);
+				break;
+			}
+		} else {
+			memcpy(ptr, elf_data + phdr->p_offset, filesz);
+		}
+
+		/* skip the memzero logic performed by remoteproc ELF loader */
+	}
+
+	return ret;
+}
+
+static const void *
+pru_rproc_find_interrupt_map(struct device *dev, const struct firmware *fw)
+{
+	struct elf32_shdr *shdr, *name_table_shdr;
+	const char *name_table;
+	const u8 *elf_data = fw->data;
+	struct elf32_hdr *ehdr = (struct elf32_hdr *)elf_data;
+	u16 shnum = ehdr->e_shnum;
+	u16 shstrndx = ehdr->e_shstrndx;
+	int i;
+
+	/* first, get the section header */
+	shdr = (struct elf32_shdr *)(elf_data + ehdr->e_shoff);
+	/* compute name table section header entry in shdr array */
+	name_table_shdr = shdr + shstrndx;
+	/* finally, compute the name table section address in elf */
+	name_table = elf_data + name_table_shdr->sh_offset;
+
+	for (i = 0; i < shnum; i++, shdr++) {
+		u32 size = shdr->sh_size;
+		u32 offset = shdr->sh_offset;
+		u32 name = shdr->sh_name;
+
+		if (strcmp(name_table + name, ".pru_irq_map"))
+			continue;
+
+		/* make sure we have the entire irq map */
+		if (offset + size > fw->size || offset + size < size) {
+			dev_err(dev, ".pru_irq_map section truncated\n");
+			return ERR_PTR(-EINVAL);
+		}
+
+		/* make sure irq map has at least the header */
+		if (sizeof(struct pru_irq_rsc) > size) {
+			dev_err(dev, "header-less .pru_irq_map section\n");
+			return ERR_PTR(-EINVAL);
+		}
+
+		return shdr;
+	}
+
+	dev_dbg(dev, "no .pru_irq_map section found for this fw\n");
+
+	return NULL;
+}
+
+/*
+ * Use a custom parse_fw callback function for dealing with PRU firmware
+ * specific sections.
+ *
+ * The firmware blob can contain optional ELF sections: .resource_table section
+ * and .pru_irq_map one. The second one contains the PRUSS interrupt mapping
+ * description, which needs to be setup before powering on the PRU core. To
+ * avoid RAM wastage this ELF section is not mapped to any ELF segment (by the
+ * firmware linker) and therefore is not loaded to PRU memory.
+ */
+static int pru_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
+{
+	struct device *dev = &rproc->dev;
+	struct pru_rproc *pru = rproc->priv;
+	const u8 *elf_data = fw->data;
+	const void *shdr;
+	u8 class = fw_elf_get_class(fw);
+	u64 sh_offset;
+	int ret;
+
+	/* load optional rsc table */
+	ret = rproc_elf_load_rsc_table(rproc, fw);
+	if (ret == -EINVAL)
+		dev_dbg(&rproc->dev, "no resource table found for this fw\n");
+	else if (ret)
+		return ret;
+
+	/* find .pru_interrupt_map section, not having it is not an error */
+	shdr = pru_rproc_find_interrupt_map(dev, fw);
+	if (IS_ERR(shdr))
+		return PTR_ERR(shdr);
+
+	if (!shdr)
+		return 0;
+
+	/* preserve pointer to PRU interrupt map together with it size */
+	sh_offset = elf_shdr_get_sh_offset(class, shdr);
+	pru->pru_interrupt_map = (struct pru_irq_rsc *)(elf_data + sh_offset);
+	pru->pru_interrupt_map_sz = elf_shdr_get_sh_size(class, shdr);
+
+	return 0;
+}
+
+/*
+ * Compute PRU id based on the IRAM addresses. The PRU IRAMs are
+ * always at a particular offset within the PRUSS address space.
+ */
+static int pru_rproc_set_id(struct pru_rproc *pru)
+{
+	int ret = 0;
+
+	switch (pru->mem_regions[PRU_IOMEM_IRAM].pa & PRU_IRAM_ADDR_MASK) {
+	case TX_PRU0_IRAM_ADDR_MASK:
+		fallthrough;
+	case RTU0_IRAM_ADDR_MASK:
+		fallthrough;
+	case PRU0_IRAM_ADDR_MASK:
+		pru->id = 0;
+		break;
+	case TX_PRU1_IRAM_ADDR_MASK:
+		fallthrough;
+	case RTU1_IRAM_ADDR_MASK:
+		fallthrough;
+	case PRU1_IRAM_ADDR_MASK:
+		pru->id = 1;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int pru_rproc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct platform_device *ppdev = to_platform_device(dev->parent);
+	struct pru_rproc *pru;
+	const char *fw_name;
+	struct rproc *rproc = NULL;
+	struct resource *res;
+	int i, ret;
+	const struct pru_private_data *data;
+	const char *mem_names[PRU_IOMEM_MAX] = { "iram", "control", "debug" };
+
+	data = of_device_get_match_data(&pdev->dev);
+	if (!data)
+		return -ENODEV;
+
+	ret = of_property_read_string(np, "firmware-name", &fw_name);
+	if (ret) {
+		dev_err(dev, "unable to retrieve firmware-name %d\n", ret);
+		return ret;
+	}
+
+	rproc = devm_rproc_alloc(dev, pdev->name, &pru_rproc_ops, fw_name,
+				 sizeof(*pru));
+	if (!rproc) {
+		dev_err(dev, "rproc_alloc failed\n");
+		return -ENOMEM;
+	}
+	/* use a custom load function to deal with PRU-specific quirks */
+	rproc->ops->load = pru_rproc_load_elf_segments;
+
+	/* use a custom parse function to deal with PRU-specific resources */
+	rproc->ops->parse_fw = pru_rproc_parse_fw;
+
+	/* error recovery is not supported for PRUs */
+	rproc->recovery_disabled = true;
+
+	/*
+	 * rproc_add will auto-boot the processor normally, but this is not
+	 * desired with PRU client driven boot-flow methodology. A PRU
+	 * application/client driver will boot the corresponding PRU
+	 * remote-processor as part of its state machine either through the
+	 * remoteproc sysfs interface or through the equivalent kernel API.
+	 */
+	rproc->auto_boot = false;
+
+	pru = rproc->priv;
+	pru->dev = dev;
+	pru->data = data;
+	pru->pruss = platform_get_drvdata(ppdev);
+	pru->rproc = rproc;
+	pru->fw_name = fw_name;
+
+	for (i = 0; i < ARRAY_SIZE(mem_names); i++) {
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						   mem_names[i]);
+		pru->mem_regions[i].va = devm_ioremap_resource(dev, res);
+		if (IS_ERR(pru->mem_regions[i].va)) {
+			dev_err(dev, "failed to parse and map memory resource %d %s\n",
+				i, mem_names[i]);
+			ret = PTR_ERR(pru->mem_regions[i].va);
+			return ret;
+		}
+		pru->mem_regions[i].pa = res->start;
+		pru->mem_regions[i].size = resource_size(res);
+
+		dev_dbg(dev, "memory %8s: pa %pa size 0x%zx va %pK\n",
+			mem_names[i], &pru->mem_regions[i].pa,
+			pru->mem_regions[i].size, pru->mem_regions[i].va);
+	}
+
+	ret = pru_rproc_set_id(pru);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, rproc);
+
+	ret = devm_rproc_add(dev, pru->rproc);
+	if (ret) {
+		dev_err(dev, "rproc_add failed: %d\n", ret);
+		return ret;
+	}
+
+	pru_rproc_create_debug_entries(rproc);
+
+	dev_dbg(dev, "PRU rproc node %pOF probed successfully\n", np);
+
+	return 0;
+}
+
+static int pru_rproc_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rproc *rproc = platform_get_drvdata(pdev);
+
+	dev_dbg(dev, "%s: removing rproc %s\n", __func__, rproc->name);
+
+	return 0;
+}
+
+static const struct pru_private_data pru_data = {
+	.type = PRU_TYPE_PRU,
+};
+
+static const struct pru_private_data k3_pru_data = {
+	.type = PRU_TYPE_PRU,
+	.is_k3 = 1,
+};
+
+static const struct pru_private_data k3_rtu_data = {
+	.type = PRU_TYPE_RTU,
+	.is_k3 = 1,
+};
+
+static const struct pru_private_data k3_tx_pru_data = {
+	.type = PRU_TYPE_TX_PRU,
+	.is_k3 = 1,
+};
+
+static const struct of_device_id pru_rproc_match[] = {
+	{ .compatible = "ti,am3356-pru",	.data = &pru_data },
+	{ .compatible = "ti,am4376-pru",	.data = &pru_data },
+	{ .compatible = "ti,am5728-pru",	.data = &pru_data },
+	{ .compatible = "ti,am642-pru",		.data = &k3_pru_data },
+	{ .compatible = "ti,am642-rtu",		.data = &k3_rtu_data },
+	{ .compatible = "ti,am642-tx-pru",	.data = &k3_tx_pru_data },
+	{ .compatible = "ti,k2g-pru",		.data = &pru_data },
+	{ .compatible = "ti,am654-pru",		.data = &k3_pru_data },
+	{ .compatible = "ti,am654-rtu",		.data = &k3_rtu_data },
+	{ .compatible = "ti,am654-tx-pru",	.data = &k3_tx_pru_data },
+	{ .compatible = "ti,j721e-pru",		.data = &k3_pru_data },
+	{ .compatible = "ti,j721e-rtu",		.data = &k3_rtu_data },
+	{ .compatible = "ti,j721e-tx-pru",	.data = &k3_tx_pru_data },
+	{ .compatible = "ti,am625-pru",		.data = &k3_pru_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pru_rproc_match);
+
+static struct platform_driver pru_rproc_driver = {
+	.driver = {
+		.name   = "pru-rproc",
+		.of_match_table = pru_rproc_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe  = pru_rproc_probe,
+	.remove = pru_rproc_remove,
+};
+module_platform_driver(pru_rproc_driver);
+
+MODULE_AUTHOR("Suman Anna <s-anna@ti.com>");
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_AUTHOR("Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>");
+MODULE_DESCRIPTION("PRU-ICSS Remote Processor Driver");
+MODULE_LICENSE("GPL v2");