Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 481 insertions, 0 deletions

diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c
new file mode 100644
index 000000000..e6bd3c7a9
--- /dev/null
+++ b/drivers/remoteproc/st_remoteproc.c
@@ -0,0 +1,481 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ST's Remote Processor Control Driver
+ *
+ * Copyright (C) 2015 STMicroelectronics - All Rights Reserved
+ *
+ * Author: Ludovic Barre <ludovic.barre@st.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_client.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/remoteproc.h>
+#include <linux/reset.h>
+
+#include "remoteproc_internal.h"
+
+#define ST_RPROC_VQ0		0
+#define ST_RPROC_VQ1		1
+#define ST_RPROC_MAX_VRING	2
+
+#define MBOX_RX			0
+#define MBOX_TX			1
+#define MBOX_MAX		2
+
+struct st_rproc_config {
+	bool			sw_reset;
+	bool			pwr_reset;
+	unsigned long		bootaddr_mask;
+};
+
+struct st_rproc {
+	struct st_rproc_config	*config;
+	struct reset_control	*sw_reset;
+	struct reset_control	*pwr_reset;
+	struct clk		*clk;
+	u32			clk_rate;
+	struct regmap		*boot_base;
+	u32			boot_offset;
+	struct mbox_chan	*mbox_chan[ST_RPROC_MAX_VRING * MBOX_MAX];
+	struct mbox_client mbox_client_vq0;
+	struct mbox_client mbox_client_vq1;
+};
+
+static void st_rproc_mbox_callback(struct device *dev, u32 msg)
+{
+	struct rproc *rproc = dev_get_drvdata(dev);
+
+	if (rproc_vq_interrupt(rproc, msg) == IRQ_NONE)
+		dev_dbg(dev, "no message was found in vqid %d\n", msg);
+}
+
+static
+void st_rproc_mbox_callback_vq0(struct mbox_client *mbox_client, void *data)
+{
+	st_rproc_mbox_callback(mbox_client->dev, 0);
+}
+
+static
+void st_rproc_mbox_callback_vq1(struct mbox_client *mbox_client, void *data)
+{
+	st_rproc_mbox_callback(mbox_client->dev, 1);
+}
+
+static void st_rproc_kick(struct rproc *rproc, int vqid)
+{
+	struct st_rproc *ddata = rproc->priv;
+	struct device *dev = rproc->dev.parent;
+	int ret;
+
+	/* send the index of the triggered virtqueue in the mailbox payload */
+	if (WARN_ON(vqid >= ST_RPROC_MAX_VRING))
+		return;
+
+	ret = mbox_send_message(ddata->mbox_chan[vqid * MBOX_MAX + MBOX_TX],
+				(void *)&vqid);
+	if (ret < 0)
+		dev_err(dev, "failed to send message via mbox: %d\n", ret);
+}
+
+static int st_rproc_mem_alloc(struct rproc *rproc,
+			      struct rproc_mem_entry *mem)
+{
+	struct device *dev = rproc->dev.parent;
+	void *va;
+
+	va = ioremap_wc(mem->dma, mem->len);
+	if (!va) {
+		dev_err(dev, "Unable to map memory region: %pa+%zx\n",
+			&mem->dma, mem->len);
+		return -ENOMEM;
+	}
+
+	/* Update memory entry va */
+	mem->va = va;
+
+	return 0;
+}
+
+static int st_rproc_mem_release(struct rproc *rproc,
+				struct rproc_mem_entry *mem)
+{
+	iounmap(mem->va);
+
+	return 0;
+}
+
+static int st_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
+{
+	struct device *dev = rproc->dev.parent;
+	struct device_node *np = dev->of_node;
+	struct rproc_mem_entry *mem;
+	struct reserved_mem *rmem;
+	struct of_phandle_iterator it;
+	int index = 0;
+
+	of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
+	while (of_phandle_iterator_next(&it) == 0) {
+		rmem = of_reserved_mem_lookup(it.node);
+		if (!rmem) {
+			of_node_put(it.node);
+			dev_err(dev, "unable to acquire memory-region\n");
+			return -EINVAL;
+		}
+
+		/*  No need to map vdev buffer */
+		if (strcmp(it.node->name, "vdev0buffer")) {
+			/* Register memory region */
+			mem = rproc_mem_entry_init(dev, NULL,
+						   (dma_addr_t)rmem->base,
+						   rmem->size, rmem->base,
+						   st_rproc_mem_alloc,
+						   st_rproc_mem_release,
+						   it.node->name);
+		} else {
+			/* Register reserved memory for vdev buffer allocation */
+			mem = rproc_of_resm_mem_entry_init(dev, index,
+							   rmem->size,
+							   rmem->base,
+							   it.node->name);
+		}
+
+		if (!mem) {
+			of_node_put(it.node);
+			return -ENOMEM;
+		}
+
+		rproc_add_carveout(rproc, mem);
+		index++;
+	}
+
+	return rproc_elf_load_rsc_table(rproc, fw);
+}
+
+static int st_rproc_start(struct rproc *rproc)
+{
+	struct st_rproc *ddata = rproc->priv;
+	int err;
+
+	regmap_update_bits(ddata->boot_base, ddata->boot_offset,
+			   ddata->config->bootaddr_mask, rproc->bootaddr);
+
+	err = clk_enable(ddata->clk);
+	if (err) {
+		dev_err(&rproc->dev, "Failed to enable clock\n");
+		return err;
+	}
+
+	if (ddata->config->sw_reset) {
+		err = reset_control_deassert(ddata->sw_reset);
+		if (err) {
+			dev_err(&rproc->dev, "Failed to deassert S/W Reset\n");
+			goto sw_reset_fail;
+		}
+	}
+
+	if (ddata->config->pwr_reset) {
+		err = reset_control_deassert(ddata->pwr_reset);
+		if (err) {
+			dev_err(&rproc->dev, "Failed to deassert Power Reset\n");
+			goto pwr_reset_fail;
+		}
+	}
+
+	dev_info(&rproc->dev, "Started from 0x%llx\n", rproc->bootaddr);
+
+	return 0;
+
+
+pwr_reset_fail:
+	if (ddata->config->pwr_reset)
+		reset_control_assert(ddata->sw_reset);
+sw_reset_fail:
+	clk_disable(ddata->clk);
+
+	return err;
+}
+
+static int st_rproc_stop(struct rproc *rproc)
+{
+	struct st_rproc *ddata = rproc->priv;
+	int sw_err = 0, pwr_err = 0;
+
+	if (ddata->config->sw_reset) {
+		sw_err = reset_control_assert(ddata->sw_reset);
+		if (sw_err)
+			dev_err(&rproc->dev, "Failed to assert S/W Reset\n");
+	}
+
+	if (ddata->config->pwr_reset) {
+		pwr_err = reset_control_assert(ddata->pwr_reset);
+		if (pwr_err)
+			dev_err(&rproc->dev, "Failed to assert Power Reset\n");
+	}
+
+	clk_disable(ddata->clk);
+
+	return sw_err ?: pwr_err;
+}
+
+static const struct rproc_ops st_rproc_ops = {
+	.kick			= st_rproc_kick,
+	.start			= st_rproc_start,
+	.stop			= st_rproc_stop,
+	.parse_fw		= st_rproc_parse_fw,
+	.load			= rproc_elf_load_segments,
+	.find_loaded_rsc_table	= rproc_elf_find_loaded_rsc_table,
+	.sanity_check		= rproc_elf_sanity_check,
+	.get_boot_addr		= rproc_elf_get_boot_addr,
+};
+
+/*
+ * Fetch state of the processor: 0 is off, 1 is on.
+ */
+static int st_rproc_state(struct platform_device *pdev)
+{
+	struct rproc *rproc = platform_get_drvdata(pdev);
+	struct st_rproc *ddata = rproc->priv;
+	int reset_sw = 0, reset_pwr = 0;
+
+	if (ddata->config->sw_reset)
+		reset_sw = reset_control_status(ddata->sw_reset);
+
+	if (ddata->config->pwr_reset)
+		reset_pwr = reset_control_status(ddata->pwr_reset);
+
+	if (reset_sw < 0 || reset_pwr < 0)
+		return -EINVAL;
+
+	return !reset_sw && !reset_pwr;
+}
+
+static const struct st_rproc_config st40_rproc_cfg = {
+	.sw_reset = true,
+	.pwr_reset = true,
+	.bootaddr_mask = GENMASK(28, 1),
+};
+
+static const struct st_rproc_config st231_rproc_cfg = {
+	.sw_reset = true,
+	.pwr_reset = false,
+	.bootaddr_mask = GENMASK(31, 6),
+};
+
+static const struct of_device_id st_rproc_match[] = {
+	{ .compatible = "st,st40-rproc", .data = &st40_rproc_cfg },
+	{ .compatible = "st,st231-rproc", .data = &st231_rproc_cfg },
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_rproc_match);
+
+static int st_rproc_parse_dt(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rproc *rproc = platform_get_drvdata(pdev);
+	struct st_rproc *ddata = rproc->priv;
+	struct device_node *np = dev->of_node;
+	int err;
+
+	if (ddata->config->sw_reset) {
+		ddata->sw_reset = devm_reset_control_get_exclusive(dev,
+								   "sw_reset");
+		if (IS_ERR(ddata->sw_reset)) {
+			dev_err(dev, "Failed to get S/W Reset\n");
+			return PTR_ERR(ddata->sw_reset);
+		}
+	}
+
+	if (ddata->config->pwr_reset) {
+		ddata->pwr_reset = devm_reset_control_get_exclusive(dev,
+								    "pwr_reset");
+		if (IS_ERR(ddata->pwr_reset)) {
+			dev_err(dev, "Failed to get Power Reset\n");
+			return PTR_ERR(ddata->pwr_reset);
+		}
+	}
+
+	ddata->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(ddata->clk)) {
+		dev_err(dev, "Failed to get clock\n");
+		return PTR_ERR(ddata->clk);
+	}
+
+	err = of_property_read_u32(np, "clock-frequency", &ddata->clk_rate);
+	if (err) {
+		dev_err(dev, "failed to get clock frequency\n");
+		return err;
+	}
+
+	ddata->boot_base = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+	if (IS_ERR(ddata->boot_base)) {
+		dev_err(dev, "Boot base not found\n");
+		return PTR_ERR(ddata->boot_base);
+	}
+
+	err = of_property_read_u32_index(np, "st,syscfg", 1,
+					 &ddata->boot_offset);
+	if (err) {
+		dev_err(dev, "Boot offset not found\n");
+		return -EINVAL;
+	}
+
+	err = clk_prepare(ddata->clk);
+	if (err)
+		dev_err(dev, "failed to get clock\n");
+
+	return err;
+}
+
+static int st_rproc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *match;
+	struct st_rproc *ddata;
+	struct device_node *np = dev->of_node;
+	struct rproc *rproc;
+	struct mbox_chan *chan;
+	int enabled;
+	int ret, i;
+
+	match = of_match_device(st_rproc_match, dev);
+	if (!match || !match->data) {
+		dev_err(dev, "No device match found\n");
+		return -ENODEV;
+	}
+
+	rproc = rproc_alloc(dev, np->name, &st_rproc_ops, NULL, sizeof(*ddata));
+	if (!rproc)
+		return -ENOMEM;
+
+	rproc->has_iommu = false;
+	ddata = rproc->priv;
+	ddata->config = (struct st_rproc_config *)match->data;
+
+	platform_set_drvdata(pdev, rproc);
+
+	ret = st_rproc_parse_dt(pdev);
+	if (ret)
+		goto free_rproc;
+
+	enabled = st_rproc_state(pdev);
+	if (enabled < 0) {
+		ret = enabled;
+		goto free_clk;
+	}
+
+	if (enabled) {
+		atomic_inc(&rproc->power);
+		rproc->state = RPROC_RUNNING;
+	} else {
+		clk_set_rate(ddata->clk, ddata->clk_rate);
+	}
+
+	if (of_get_property(np, "mbox-names", NULL)) {
+		ddata->mbox_client_vq0.dev		= dev;
+		ddata->mbox_client_vq0.tx_done		= NULL;
+		ddata->mbox_client_vq0.tx_block	= false;
+		ddata->mbox_client_vq0.knows_txdone	= false;
+		ddata->mbox_client_vq0.rx_callback	= st_rproc_mbox_callback_vq0;
+
+		ddata->mbox_client_vq1.dev		= dev;
+		ddata->mbox_client_vq1.tx_done		= NULL;
+		ddata->mbox_client_vq1.tx_block	= false;
+		ddata->mbox_client_vq1.knows_txdone	= false;
+		ddata->mbox_client_vq1.rx_callback	= st_rproc_mbox_callback_vq1;
+
+		/*
+		 * To control a co-processor without IPC mechanism.
+		 * This driver can be used without mbox and rpmsg.
+		 */
+		chan = mbox_request_channel_byname(&ddata->mbox_client_vq0, "vq0_rx");
+		if (IS_ERR(chan)) {
+			dev_err(&rproc->dev, "failed to request mbox chan 0\n");
+			ret = PTR_ERR(chan);
+			goto free_clk;
+		}
+		ddata->mbox_chan[ST_RPROC_VQ0 * MBOX_MAX + MBOX_RX] = chan;
+
+		chan = mbox_request_channel_byname(&ddata->mbox_client_vq0, "vq0_tx");
+		if (IS_ERR(chan)) {
+			dev_err(&rproc->dev, "failed to request mbox chan 0\n");
+			ret = PTR_ERR(chan);
+			goto free_mbox;
+		}
+		ddata->mbox_chan[ST_RPROC_VQ0 * MBOX_MAX + MBOX_TX] = chan;
+
+		chan = mbox_request_channel_byname(&ddata->mbox_client_vq1, "vq1_rx");
+		if (IS_ERR(chan)) {
+			dev_err(&rproc->dev, "failed to request mbox chan 1\n");
+			ret = PTR_ERR(chan);
+			goto free_mbox;
+		}
+		ddata->mbox_chan[ST_RPROC_VQ1 * MBOX_MAX + MBOX_RX] = chan;
+
+		chan = mbox_request_channel_byname(&ddata->mbox_client_vq1, "vq1_tx");
+		if (IS_ERR(chan)) {
+			dev_err(&rproc->dev, "failed to request mbox chan 1\n");
+			ret = PTR_ERR(chan);
+			goto free_mbox;
+		}
+		ddata->mbox_chan[ST_RPROC_VQ1 * MBOX_MAX + MBOX_TX] = chan;
+	}
+
+	ret = rproc_add(rproc);
+	if (ret)
+		goto free_mbox;
+
+	return 0;
+
+free_mbox:
+	for (i = 0; i < ST_RPROC_MAX_VRING * MBOX_MAX; i++)
+		mbox_free_channel(ddata->mbox_chan[i]);
+free_clk:
+	clk_unprepare(ddata->clk);
+free_rproc:
+	rproc_free(rproc);
+	return ret;
+}
+
+static int st_rproc_remove(struct platform_device *pdev)
+{
+	struct rproc *rproc = platform_get_drvdata(pdev);
+	struct st_rproc *ddata = rproc->priv;
+	int i;
+
+	rproc_del(rproc);
+
+	clk_disable_unprepare(ddata->clk);
+
+	for (i = 0; i < ST_RPROC_MAX_VRING * MBOX_MAX; i++)
+		mbox_free_channel(ddata->mbox_chan[i]);
+
+	rproc_free(rproc);
+
+	return 0;
+}
+
+static struct platform_driver st_rproc_driver = {
+	.probe = st_rproc_probe,
+	.remove = st_rproc_remove,
+	.driver = {
+		.name = "st-rproc",
+		.of_match_table = of_match_ptr(st_rproc_match),
+	},
+};
+module_platform_driver(st_rproc_driver);
+
+MODULE_DESCRIPTION("ST Remote Processor Control Driver");
+MODULE_AUTHOR("Ludovic Barre <ludovic.barre@st.com>");
+MODULE_LICENSE("GPL v2");