Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 616 insertions, 0 deletions

diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c
new file mode 100644
index 000000000..11fa97885
--- /dev/null
+++ b/drivers/rtc/rtc-pcf8563.c
@@ -0,0 +1,616 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * An I2C driver for the Philips PCF8563 RTC
+ * Copyright 2005-06 Tower Technologies
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ * based on the other drivers in this same directory.
+ *
+ * https://www.nxp.com/docs/en/data-sheet/PCF8563.pdf
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/err.h>
+
+#define PCF8563_REG_ST1		0x00 /* status */
+#define PCF8563_REG_ST2		0x01
+#define PCF8563_BIT_AIE		BIT(1)
+#define PCF8563_BIT_AF		BIT(3)
+#define PCF8563_BITS_ST2_N	(7 << 5)
+
+#define PCF8563_REG_SC		0x02 /* datetime */
+#define PCF8563_REG_MN		0x03
+#define PCF8563_REG_HR		0x04
+#define PCF8563_REG_DM		0x05
+#define PCF8563_REG_DW		0x06
+#define PCF8563_REG_MO		0x07
+#define PCF8563_REG_YR		0x08
+
+#define PCF8563_REG_AMN		0x09 /* alarm */
+
+#define PCF8563_REG_CLKO		0x0D /* clock out */
+#define PCF8563_REG_CLKO_FE		0x80 /* clock out enabled */
+#define PCF8563_REG_CLKO_F_MASK		0x03 /* frequenc mask */
+#define PCF8563_REG_CLKO_F_32768HZ	0x00
+#define PCF8563_REG_CLKO_F_1024HZ	0x01
+#define PCF8563_REG_CLKO_F_32HZ		0x02
+#define PCF8563_REG_CLKO_F_1HZ		0x03
+
+#define PCF8563_REG_TMRC	0x0E /* timer control */
+#define PCF8563_TMRC_ENABLE	BIT(7)
+#define PCF8563_TMRC_4096	0
+#define PCF8563_TMRC_64		1
+#define PCF8563_TMRC_1		2
+#define PCF8563_TMRC_1_60	3
+#define PCF8563_TMRC_MASK	3
+
+#define PCF8563_REG_TMR		0x0F /* timer */
+
+#define PCF8563_SC_LV		0x80 /* low voltage */
+#define PCF8563_MO_C		0x80 /* century */
+
+static struct i2c_driver pcf8563_driver;
+
+struct pcf8563 {
+	struct rtc_device *rtc;
+	/*
+	 * The meaning of MO_C bit varies by the chip type.
+	 * From PCF8563 datasheet: this bit is toggled when the years
+	 * register overflows from 99 to 00
+	 *   0 indicates the century is 20xx
+	 *   1 indicates the century is 19xx
+	 * From RTC8564 datasheet: this bit indicates change of
+	 * century. When the year digit data overflows from 99 to 00,
+	 * this bit is set. By presetting it to 0 while still in the
+	 * 20th century, it will be set in year 2000, ...
+	 * There seems no reliable way to know how the system use this
+	 * bit.  So let's do it heuristically, assuming we are live in
+	 * 1970...2069.
+	 */
+	int c_polarity;	/* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
+
+	struct i2c_client *client;
+#ifdef CONFIG_COMMON_CLK
+	struct clk_hw		clkout_hw;
+#endif
+};
+
+static int pcf8563_read_block_data(struct i2c_client *client, unsigned char reg,
+				   unsigned char length, unsigned char *buf)
+{
+	struct i2c_msg msgs[] = {
+		{/* setup read ptr */
+			.addr = client->addr,
+			.len = 1,
+			.buf = &reg,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = length,
+			.buf = buf
+		},
+	};
+
+	if ((i2c_transfer(client->adapter, msgs, 2)) != 2) {
+		dev_err(&client->dev, "%s: read error\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int pcf8563_write_block_data(struct i2c_client *client,
+				   unsigned char reg, unsigned char length,
+				   unsigned char *buf)
+{
+	int i, err;
+
+	for (i = 0; i < length; i++) {
+		unsigned char data[2] = { reg + i, buf[i] };
+
+		err = i2c_master_send(client, data, sizeof(data));
+		if (err != sizeof(data)) {
+			dev_err(&client->dev,
+				"%s: err=%d addr=%02x, data=%02x\n",
+				__func__, err, data[0], data[1]);
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static int pcf8563_set_alarm_mode(struct i2c_client *client, bool on)
+{
+	unsigned char buf;
+	int err;
+
+	err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf);
+	if (err < 0)
+		return err;
+
+	if (on)
+		buf |= PCF8563_BIT_AIE;
+	else
+		buf &= ~PCF8563_BIT_AIE;
+
+	buf &= ~(PCF8563_BIT_AF | PCF8563_BITS_ST2_N);
+
+	err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, &buf);
+	if (err < 0) {
+		dev_err(&client->dev, "%s: write error\n", __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int pcf8563_get_alarm_mode(struct i2c_client *client, unsigned char *en,
+				  unsigned char *pen)
+{
+	unsigned char buf;
+	int err;
+
+	err = pcf8563_read_block_data(client, PCF8563_REG_ST2, 1, &buf);
+	if (err)
+		return err;
+
+	if (en)
+		*en = !!(buf & PCF8563_BIT_AIE);
+	if (pen)
+		*pen = !!(buf & PCF8563_BIT_AF);
+
+	return 0;
+}
+
+static irqreturn_t pcf8563_irq(int irq, void *dev_id)
+{
+	struct pcf8563 *pcf8563 = i2c_get_clientdata(dev_id);
+	int err;
+	char pending;
+
+	err = pcf8563_get_alarm_mode(pcf8563->client, NULL, &pending);
+	if (err)
+		return IRQ_NONE;
+
+	if (pending) {
+		rtc_update_irq(pcf8563->rtc, 1, RTC_IRQF | RTC_AF);
+		pcf8563_set_alarm_mode(pcf8563->client, 1);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+/*
+ * In the routines that deal directly with the pcf8563 hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
+ */
+static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
+	unsigned char buf[9];
+	int err;
+
+	err = pcf8563_read_block_data(client, PCF8563_REG_ST1, 9, buf);
+	if (err)
+		return err;
+
+	if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) {
+		dev_err(&client->dev,
+			"low voltage detected, date/time is not reliable.\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(&client->dev,
+		"%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, "
+		"mday=%02x, wday=%02x, mon=%02x, year=%02x\n",
+		__func__,
+		buf[0], buf[1], buf[2], buf[3],
+		buf[4], buf[5], buf[6], buf[7],
+		buf[8]);
+
+
+	tm->tm_sec = bcd2bin(buf[PCF8563_REG_SC] & 0x7F);
+	tm->tm_min = bcd2bin(buf[PCF8563_REG_MN] & 0x7F);
+	tm->tm_hour = bcd2bin(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */
+	tm->tm_mday = bcd2bin(buf[PCF8563_REG_DM] & 0x3F);
+	tm->tm_wday = buf[PCF8563_REG_DW] & 0x07;
+	tm->tm_mon = bcd2bin(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */
+	tm->tm_year = bcd2bin(buf[PCF8563_REG_YR]) + 100;
+	/* detect the polarity heuristically. see note above. */
+	pcf8563->c_polarity = (buf[PCF8563_REG_MO] & PCF8563_MO_C) ?
+		(tm->tm_year >= 100) : (tm->tm_year < 100);
+
+	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	return 0;
+}
+
+static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pcf8563 *pcf8563 = i2c_get_clientdata(client);
+	unsigned char buf[9];
+
+	dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
+		"mday=%d, mon=%d, year=%d, wday=%d\n",
+		__func__,
+		tm->tm_sec, tm->tm_min, tm->tm_hour,
+		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+	/* hours, minutes and seconds */
+	buf[PCF8563_REG_SC] = bin2bcd(tm->tm_sec);
+	buf[PCF8563_REG_MN] = bin2bcd(tm->tm_min);
+	buf[PCF8563_REG_HR] = bin2bcd(tm->tm_hour);
+
+	buf[PCF8563_REG_DM] = bin2bcd(tm->tm_mday);
+
+	/* month, 1 - 12 */
+	buf[PCF8563_REG_MO] = bin2bcd(tm->tm_mon + 1);
+
+	/* year and century */
+	buf[PCF8563_REG_YR] = bin2bcd(tm->tm_year - 100);
+	if (pcf8563->c_polarity ? (tm->tm_year >= 100) : (tm->tm_year < 100))
+		buf[PCF8563_REG_MO] |= PCF8563_MO_C;
+
+	buf[PCF8563_REG_DW] = tm->tm_wday & 0x07;
+
+	return pcf8563_write_block_data(client, PCF8563_REG_SC,
+				9 - PCF8563_REG_SC, buf + PCF8563_REG_SC);
+}
+
+static int pcf8563_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	switch (cmd) {
+	case RTC_VL_READ:
+		ret = i2c_smbus_read_byte_data(client, PCF8563_REG_SC);
+		if (ret < 0)
+			return ret;
+
+		return put_user(ret & PCF8563_SC_LV ? RTC_VL_DATA_INVALID : 0,
+				(unsigned int __user *)arg);
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+static int pcf8563_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char buf[4];
+	int err;
+
+	err = pcf8563_read_block_data(client, PCF8563_REG_AMN, 4, buf);
+	if (err)
+		return err;
+
+	dev_dbg(&client->dev,
+		"%s: raw data is min=%02x, hr=%02x, mday=%02x, wday=%02x\n",
+		__func__, buf[0], buf[1], buf[2], buf[3]);
+
+	tm->time.tm_sec = 0;
+	tm->time.tm_min = bcd2bin(buf[0] & 0x7F);
+	tm->time.tm_hour = bcd2bin(buf[1] & 0x3F);
+	tm->time.tm_mday = bcd2bin(buf[2] & 0x3F);
+	tm->time.tm_wday = bcd2bin(buf[3] & 0x7);
+
+	err = pcf8563_get_alarm_mode(client, &tm->enabled, &tm->pending);
+	if (err < 0)
+		return err;
+
+	dev_dbg(&client->dev, "%s: tm is mins=%d, hours=%d, mday=%d, wday=%d,"
+		" enabled=%d, pending=%d\n", __func__, tm->time.tm_min,
+		tm->time.tm_hour, tm->time.tm_mday, tm->time.tm_wday,
+		tm->enabled, tm->pending);
+
+	return 0;
+}
+
+static int pcf8563_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char buf[4];
+	int err;
+
+	buf[0] = bin2bcd(tm->time.tm_min);
+	buf[1] = bin2bcd(tm->time.tm_hour);
+	buf[2] = bin2bcd(tm->time.tm_mday);
+	buf[3] = tm->time.tm_wday & 0x07;
+
+	err = pcf8563_write_block_data(client, PCF8563_REG_AMN, 4, buf);
+	if (err)
+		return err;
+
+	return pcf8563_set_alarm_mode(client, !!tm->enabled);
+}
+
+static int pcf8563_irq_enable(struct device *dev, unsigned int enabled)
+{
+	dev_dbg(dev, "%s: en=%d\n", __func__, enabled);
+	return pcf8563_set_alarm_mode(to_i2c_client(dev), !!enabled);
+}
+
+#ifdef CONFIG_COMMON_CLK
+/*
+ * Handling of the clkout
+ */
+
+#define clkout_hw_to_pcf8563(_hw) container_of(_hw, struct pcf8563, clkout_hw)
+
+static const int clkout_rates[] = {
+	32768,
+	1024,
+	32,
+	1,
+};
+
+static unsigned long pcf8563_clkout_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
+	struct i2c_client *client = pcf8563->client;
+	unsigned char buf;
+	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
+
+	if (ret < 0)
+		return 0;
+
+	buf &= PCF8563_REG_CLKO_F_MASK;
+	return clkout_rates[buf];
+}
+
+static long pcf8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long *prate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+		if (clkout_rates[i] <= rate)
+			return clkout_rates[i];
+
+	return 0;
+}
+
+static int pcf8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
+	struct i2c_client *client = pcf8563->client;
+	unsigned char buf;
+	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
+	int i;
+
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+		if (clkout_rates[i] == rate) {
+			buf &= ~PCF8563_REG_CLKO_F_MASK;
+			buf |= i;
+			ret = pcf8563_write_block_data(client,
+						       PCF8563_REG_CLKO, 1,
+						       &buf);
+			return ret;
+		}
+
+	return -EINVAL;
+}
+
+static int pcf8563_clkout_control(struct clk_hw *hw, bool enable)
+{
+	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
+	struct i2c_client *client = pcf8563->client;
+	unsigned char buf;
+	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
+
+	if (ret < 0)
+		return ret;
+
+	if (enable)
+		buf |= PCF8563_REG_CLKO_FE;
+	else
+		buf &= ~PCF8563_REG_CLKO_FE;
+
+	ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf);
+	return ret;
+}
+
+static int pcf8563_clkout_prepare(struct clk_hw *hw)
+{
+	return pcf8563_clkout_control(hw, 1);
+}
+
+static void pcf8563_clkout_unprepare(struct clk_hw *hw)
+{
+	pcf8563_clkout_control(hw, 0);
+}
+
+static int pcf8563_clkout_is_prepared(struct clk_hw *hw)
+{
+	struct pcf8563 *pcf8563 = clkout_hw_to_pcf8563(hw);
+	struct i2c_client *client = pcf8563->client;
+	unsigned char buf;
+	int ret = pcf8563_read_block_data(client, PCF8563_REG_CLKO, 1, &buf);
+
+	if (ret < 0)
+		return ret;
+
+	return !!(buf & PCF8563_REG_CLKO_FE);
+}
+
+static const struct clk_ops pcf8563_clkout_ops = {
+	.prepare = pcf8563_clkout_prepare,
+	.unprepare = pcf8563_clkout_unprepare,
+	.is_prepared = pcf8563_clkout_is_prepared,
+	.recalc_rate = pcf8563_clkout_recalc_rate,
+	.round_rate = pcf8563_clkout_round_rate,
+	.set_rate = pcf8563_clkout_set_rate,
+};
+
+static struct clk *pcf8563_clkout_register_clk(struct pcf8563 *pcf8563)
+{
+	struct i2c_client *client = pcf8563->client;
+	struct device_node *node = client->dev.of_node;
+	struct clk *clk;
+	struct clk_init_data init;
+	int ret;
+	unsigned char buf;
+
+	/* disable the clkout output */
+	buf = 0;
+	ret = pcf8563_write_block_data(client, PCF8563_REG_CLKO, 1, &buf);
+	if (ret < 0)
+		return ERR_PTR(ret);
+
+	init.name = "pcf8563-clkout";
+	init.ops = &pcf8563_clkout_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	pcf8563->clkout_hw.init = &init;
+
+	/* optional override of the clockname */
+	of_property_read_string(node, "clock-output-names", &init.name);
+
+	/* register the clock */
+	clk = devm_clk_register(&client->dev, &pcf8563->clkout_hw);
+
+	if (!IS_ERR(clk))
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+	return clk;
+}
+#endif
+
+static const struct rtc_class_ops pcf8563_rtc_ops = {
+	.ioctl		= pcf8563_rtc_ioctl,
+	.read_time	= pcf8563_rtc_read_time,
+	.set_time	= pcf8563_rtc_set_time,
+	.read_alarm	= pcf8563_rtc_read_alarm,
+	.set_alarm	= pcf8563_rtc_set_alarm,
+	.alarm_irq_enable = pcf8563_irq_enable,
+};
+
+static int pcf8563_probe(struct i2c_client *client)
+{
+	struct pcf8563 *pcf8563;
+	int err;
+	unsigned char buf;
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	pcf8563 = devm_kzalloc(&client->dev, sizeof(struct pcf8563),
+				GFP_KERNEL);
+	if (!pcf8563)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, pcf8563);
+	pcf8563->client = client;
+	device_set_wakeup_capable(&client->dev, 1);
+
+	/* Set timer to lowest frequency to save power (ref Haoyu datasheet) */
+	buf = PCF8563_TMRC_1_60;
+	err = pcf8563_write_block_data(client, PCF8563_REG_TMRC, 1, &buf);
+	if (err < 0) {
+		dev_err(&client->dev, "%s: write error\n", __func__);
+		return err;
+	}
+
+	/* Clear flags and disable interrupts */
+	buf = 0;
+	err = pcf8563_write_block_data(client, PCF8563_REG_ST2, 1, &buf);
+	if (err < 0) {
+		dev_err(&client->dev, "%s: write error\n", __func__);
+		return err;
+	}
+
+	pcf8563->rtc = devm_rtc_allocate_device(&client->dev);
+	if (IS_ERR(pcf8563->rtc))
+		return PTR_ERR(pcf8563->rtc);
+
+	pcf8563->rtc->ops = &pcf8563_rtc_ops;
+	/* the pcf8563 alarm only supports a minute accuracy */
+	set_bit(RTC_FEATURE_ALARM_RES_MINUTE, pcf8563->rtc->features);
+	clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, pcf8563->rtc->features);
+	pcf8563->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	pcf8563->rtc->range_max = RTC_TIMESTAMP_END_2099;
+	pcf8563->rtc->set_start_time = true;
+
+	if (client->irq > 0) {
+		err = devm_request_threaded_irq(&client->dev, client->irq,
+				NULL, pcf8563_irq,
+				IRQF_SHARED | IRQF_ONESHOT | IRQF_TRIGGER_LOW,
+				pcf8563_driver.driver.name, client);
+		if (err) {
+			dev_err(&client->dev, "unable to request IRQ %d\n",
+								client->irq);
+			return err;
+		}
+	}
+
+	err = devm_rtc_register_device(pcf8563->rtc);
+	if (err)
+		return err;
+
+#ifdef CONFIG_COMMON_CLK
+	/* register clk in common clk framework */
+	pcf8563_clkout_register_clk(pcf8563);
+#endif
+
+	return 0;
+}
+
+static const struct i2c_device_id pcf8563_id[] = {
+	{ "pcf8563", 0 },
+	{ "rtc8564", 0 },
+	{ "pca8565", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pcf8563_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pcf8563_of_match[] = {
+	{ .compatible = "nxp,pcf8563" },
+	{ .compatible = "epson,rtc8564" },
+	{ .compatible = "microcrystal,rv8564" },
+	{ .compatible = "nxp,pca8565" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pcf8563_of_match);
+#endif
+
+static struct i2c_driver pcf8563_driver = {
+	.driver		= {
+		.name	= "rtc-pcf8563",
+		.of_match_table = of_match_ptr(pcf8563_of_match),
+	},
+	.probe_new	= pcf8563_probe,
+	.id_table	= pcf8563_id,
+};
+
+module_i2c_driver(pcf8563_driver);
+
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver");
+MODULE_LICENSE("GPL");