Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 22656 insertions, 0 deletions

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
new file mode 100644
index 000000000..427a6ac80
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -0,0 +1,22656 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for         *
+ * Fibre Channel Host Bus Adapters.                                *
+ * Copyright (C) 2017-2022 Broadcom. All Rights Reserved. The term *
+ * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
+ * Copyright (C) 2004-2016 Emulex.  All rights reserved.           *
+ * EMULEX and SLI are trademarks of Emulex.                        *
+ * www.broadcom.com                                                *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
+ *                                                                 *
+ * This program is free software; you can redistribute it and/or   *
+ * modify it under the terms of version 2 of the GNU General       *
+ * Public License as published by the Free Software Foundation.    *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
+ * more details, a copy of which can be found in the file COPYING  *
+ * included with this package.                                     *
+ *******************************************************************/
+
+#include <linux/blkdev.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/lockdep.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport_fc.h>
+#include <scsi/fc/fc_fs.h>
+#include <linux/aer.h>
+#include <linux/crash_dump.h>
+#ifdef CONFIG_X86
+#include <asm/set_memory.h>
+#endif
+
+#include "lpfc_hw4.h"
+#include "lpfc_hw.h"
+#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
+#include "lpfc_nl.h"
+#include "lpfc_disc.h"
+#include "lpfc.h"
+#include "lpfc_scsi.h"
+#include "lpfc_nvme.h"
+#include "lpfc_crtn.h"
+#include "lpfc_logmsg.h"
+#include "lpfc_compat.h"
+#include "lpfc_debugfs.h"
+#include "lpfc_vport.h"
+#include "lpfc_version.h"
+
+/* There are only four IOCB completion types. */
+typedef enum _lpfc_iocb_type {
+	LPFC_UNKNOWN_IOCB,
+	LPFC_UNSOL_IOCB,
+	LPFC_SOL_IOCB,
+	LPFC_ABORT_IOCB
+} lpfc_iocb_type;
+
+
+/* Provide function prototypes local to this module. */
+static int lpfc_sli_issue_mbox_s4(struct lpfc_hba *, LPFC_MBOXQ_t *,
+				  uint32_t);
+static int lpfc_sli4_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *,
+			      uint8_t *, uint32_t *);
+static struct lpfc_iocbq *
+lpfc_sli4_els_preprocess_rspiocbq(struct lpfc_hba *phba,
+				  struct lpfc_iocbq *rspiocbq);
+static void lpfc_sli4_send_seq_to_ulp(struct lpfc_vport *,
+				      struct hbq_dmabuf *);
+static void lpfc_sli4_handle_mds_loopback(struct lpfc_vport *vport,
+					  struct hbq_dmabuf *dmabuf);
+static bool lpfc_sli4_fp_handle_cqe(struct lpfc_hba *phba,
+				   struct lpfc_queue *cq, struct lpfc_cqe *cqe);
+static int lpfc_sli4_post_sgl_list(struct lpfc_hba *, struct list_head *,
+				       int);
+static void lpfc_sli4_hba_handle_eqe(struct lpfc_hba *phba,
+				     struct lpfc_queue *eq,
+				     struct lpfc_eqe *eqe);
+static bool lpfc_sli4_mbox_completions_pending(struct lpfc_hba *phba);
+static bool lpfc_sli4_process_missed_mbox_completions(struct lpfc_hba *phba);
+static struct lpfc_cqe *lpfc_sli4_cq_get(struct lpfc_queue *q);
+static void __lpfc_sli4_consume_cqe(struct lpfc_hba *phba,
+				    struct lpfc_queue *cq,
+				    struct lpfc_cqe *cqe);
+static uint16_t lpfc_wqe_bpl2sgl(struct lpfc_hba *phba,
+				 struct lpfc_iocbq *pwqeq,
+				 struct lpfc_sglq *sglq);
+
+union lpfc_wqe128 lpfc_iread_cmd_template;
+union lpfc_wqe128 lpfc_iwrite_cmd_template;
+union lpfc_wqe128 lpfc_icmnd_cmd_template;
+
+/* Setup WQE templates for IOs */
+void lpfc_wqe_cmd_template(void)
+{
+	union lpfc_wqe128 *wqe;
+
+	/* IREAD template */
+	wqe = &lpfc_iread_cmd_template;
+	memset(wqe, 0, sizeof(union lpfc_wqe128));
+
+	/* Word 0, 1, 2 - BDE is variable */
+
+	/* Word 3 - cmd_buff_len, payload_offset_len is zero */
+
+	/* Word 4 - total_xfer_len is variable */
+
+	/* Word 5 - is zero */
+
+	/* Word 6 - ctxt_tag, xri_tag is variable */
+
+	/* Word 7 */
+	bf_set(wqe_cmnd, &wqe->fcp_iread.wqe_com, CMD_FCP_IREAD64_WQE);
+	bf_set(wqe_pu, &wqe->fcp_iread.wqe_com, PARM_READ_CHECK);
+	bf_set(wqe_class, &wqe->fcp_iread.wqe_com, CLASS3);
+	bf_set(wqe_ct, &wqe->fcp_iread.wqe_com, SLI4_CT_RPI);
+
+	/* Word 8 - abort_tag is variable */
+
+	/* Word 9  - reqtag is variable */
+
+	/* Word 10 - dbde, wqes is variable */
+	bf_set(wqe_qosd, &wqe->fcp_iread.wqe_com, 0);
+	bf_set(wqe_iod, &wqe->fcp_iread.wqe_com, LPFC_WQE_IOD_READ);
+	bf_set(wqe_lenloc, &wqe->fcp_iread.wqe_com, LPFC_WQE_LENLOC_WORD4);
+	bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 0);
+	bf_set(wqe_wqes, &wqe->fcp_iread.wqe_com, 1);
+
+	/* Word 11 - pbde is variable */
+	bf_set(wqe_cmd_type, &wqe->fcp_iread.wqe_com, COMMAND_DATA_IN);
+	bf_set(wqe_cqid, &wqe->fcp_iread.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
+	bf_set(wqe_pbde, &wqe->fcp_iread.wqe_com, 0);
+
+	/* Word 12 - is zero */
+
+	/* Word 13, 14, 15 - PBDE is variable */
+
+	/* IWRITE template */
+	wqe = &lpfc_iwrite_cmd_template;
+	memset(wqe, 0, sizeof(union lpfc_wqe128));
+
+	/* Word 0, 1, 2 - BDE is variable */
+
+	/* Word 3 - cmd_buff_len, payload_offset_len is zero */
+
+	/* Word 4 - total_xfer_len is variable */
+
+	/* Word 5 - initial_xfer_len is variable */
+
+	/* Word 6 - ctxt_tag, xri_tag is variable */
+
+	/* Word 7 */
+	bf_set(wqe_cmnd, &wqe->fcp_iwrite.wqe_com, CMD_FCP_IWRITE64_WQE);
+	bf_set(wqe_pu, &wqe->fcp_iwrite.wqe_com, PARM_READ_CHECK);
+	bf_set(wqe_class, &wqe->fcp_iwrite.wqe_com, CLASS3);
+	bf_set(wqe_ct, &wqe->fcp_iwrite.wqe_com, SLI4_CT_RPI);
+
+	/* Word 8 - abort_tag is variable */
+
+	/* Word 9  - reqtag is variable */
+
+	/* Word 10 - dbde, wqes is variable */
+	bf_set(wqe_qosd, &wqe->fcp_iwrite.wqe_com, 0);
+	bf_set(wqe_iod, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_IOD_WRITE);
+	bf_set(wqe_lenloc, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_LENLOC_WORD4);
+	bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 0);
+	bf_set(wqe_wqes, &wqe->fcp_iwrite.wqe_com, 1);
+
+	/* Word 11 - pbde is variable */
+	bf_set(wqe_cmd_type, &wqe->fcp_iwrite.wqe_com, COMMAND_DATA_OUT);
+	bf_set(wqe_cqid, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
+	bf_set(wqe_pbde, &wqe->fcp_iwrite.wqe_com, 0);
+
+	/* Word 12 - is zero */
+
+	/* Word 13, 14, 15 - PBDE is variable */
+
+	/* ICMND template */
+	wqe = &lpfc_icmnd_cmd_template;
+	memset(wqe, 0, sizeof(union lpfc_wqe128));
+
+	/* Word 0, 1, 2 - BDE is variable */
+
+	/* Word 3 - payload_offset_len is variable */
+
+	/* Word 4, 5 - is zero */
+
+	/* Word 6 - ctxt_tag, xri_tag is variable */
+
+	/* Word 7 */
+	bf_set(wqe_cmnd, &wqe->fcp_icmd.wqe_com, CMD_FCP_ICMND64_WQE);
+	bf_set(wqe_pu, &wqe->fcp_icmd.wqe_com, 0);
+	bf_set(wqe_class, &wqe->fcp_icmd.wqe_com, CLASS3);
+	bf_set(wqe_ct, &wqe->fcp_icmd.wqe_com, SLI4_CT_RPI);
+
+	/* Word 8 - abort_tag is variable */
+
+	/* Word 9  - reqtag is variable */
+
+	/* Word 10 - dbde, wqes is variable */
+	bf_set(wqe_qosd, &wqe->fcp_icmd.wqe_com, 1);
+	bf_set(wqe_iod, &wqe->fcp_icmd.wqe_com, LPFC_WQE_IOD_NONE);
+	bf_set(wqe_lenloc, &wqe->fcp_icmd.wqe_com, LPFC_WQE_LENLOC_NONE);
+	bf_set(wqe_dbde, &wqe->fcp_icmd.wqe_com, 0);
+	bf_set(wqe_wqes, &wqe->fcp_icmd.wqe_com, 1);
+
+	/* Word 11 */
+	bf_set(wqe_cmd_type, &wqe->fcp_icmd.wqe_com, COMMAND_DATA_IN);
+	bf_set(wqe_cqid, &wqe->fcp_icmd.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
+	bf_set(wqe_pbde, &wqe->fcp_icmd.wqe_com, 0);
+
+	/* Word 12, 13, 14, 15 - is zero */
+}
+
+#if defined(CONFIG_64BIT) && defined(__LITTLE_ENDIAN)
+/**
+ * lpfc_sli4_pcimem_bcopy - SLI4 memory copy function
+ * @srcp: Source memory pointer.
+ * @destp: Destination memory pointer.
+ * @cnt: Number of words required to be copied.
+ *       Must be a multiple of sizeof(uint64_t)
+ *
+ * This function is used for copying data between driver memory
+ * and the SLI WQ. This function also changes the endianness
+ * of each word if native endianness is different from SLI
+ * endianness. This function can be called with or without
+ * lock.
+ **/
+static void
+lpfc_sli4_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt)
+{
+	uint64_t *src = srcp;
+	uint64_t *dest = destp;
+	int i;
+
+	for (i = 0; i < (int)cnt; i += sizeof(uint64_t))
+		*dest++ = *src++;
+}
+#else
+#define lpfc_sli4_pcimem_bcopy(a, b, c) lpfc_sli_pcimem_bcopy(a, b, c)
+#endif
+
+/**
+ * lpfc_sli4_wq_put - Put a Work Queue Entry on an Work Queue
+ * @q: The Work Queue to operate on.
+ * @wqe: The work Queue Entry to put on the Work queue.
+ *
+ * This routine will copy the contents of @wqe to the next available entry on
+ * the @q. This function will then ring the Work Queue Doorbell to signal the
+ * HBA to start processing the Work Queue Entry. This function returns 0 if
+ * successful. If no entries are available on @q then this function will return
+ * -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static int
+lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe128 *wqe)
+{
+	union lpfc_wqe *temp_wqe;
+	struct lpfc_register doorbell;
+	uint32_t host_index;
+	uint32_t idx;
+	uint32_t i = 0;
+	uint8_t *tmp;
+	u32 if_type;
+
+	/* sanity check on queue memory */
+	if (unlikely(!q))
+		return -ENOMEM;
+
+	temp_wqe = lpfc_sli4_qe(q, q->host_index);
+
+	/* If the host has not yet processed the next entry then we are done */
+	idx = ((q->host_index + 1) % q->entry_count);
+	if (idx == q->hba_index) {
+		q->WQ_overflow++;
+		return -EBUSY;
+	}
+	q->WQ_posted++;
+	/* set consumption flag every once in a while */
+	if (!((q->host_index + 1) % q->notify_interval))
+		bf_set(wqe_wqec, &wqe->generic.wqe_com, 1);
+	else
+		bf_set(wqe_wqec, &wqe->generic.wqe_com, 0);
+	if (q->phba->sli3_options & LPFC_SLI4_PHWQ_ENABLED)
+		bf_set(wqe_wqid, &wqe->generic.wqe_com, q->queue_id);
+	lpfc_sli4_pcimem_bcopy(wqe, temp_wqe, q->entry_size);
+	if (q->dpp_enable && q->phba->cfg_enable_dpp) {
+		/* write to DPP aperture taking advatage of Combined Writes */
+		tmp = (uint8_t *)temp_wqe;
+#ifdef __raw_writeq
+		for (i = 0; i < q->entry_size; i += sizeof(uint64_t))
+			__raw_writeq(*((uint64_t *)(tmp + i)),
+					q->dpp_regaddr + i);
+#else
+		for (i = 0; i < q->entry_size; i += sizeof(uint32_t))
+			__raw_writel(*((uint32_t *)(tmp + i)),
+					q->dpp_regaddr + i);
+#endif
+	}
+	/* ensure WQE bcopy and DPP flushed before doorbell write */
+	wmb();
+
+	/* Update the host index before invoking device */
+	host_index = q->host_index;
+
+	q->host_index = idx;
+
+	/* Ring Doorbell */
+	doorbell.word0 = 0;
+	if (q->db_format == LPFC_DB_LIST_FORMAT) {
+		if (q->dpp_enable && q->phba->cfg_enable_dpp) {
+			bf_set(lpfc_if6_wq_db_list_fm_num_posted, &doorbell, 1);
+			bf_set(lpfc_if6_wq_db_list_fm_dpp, &doorbell, 1);
+			bf_set(lpfc_if6_wq_db_list_fm_dpp_id, &doorbell,
+			    q->dpp_id);
+			bf_set(lpfc_if6_wq_db_list_fm_id, &doorbell,
+			    q->queue_id);
+		} else {
+			bf_set(lpfc_wq_db_list_fm_num_posted, &doorbell, 1);
+			bf_set(lpfc_wq_db_list_fm_id, &doorbell, q->queue_id);
+
+			/* Leave bits <23:16> clear for if_type 6 dpp */
+			if_type = bf_get(lpfc_sli_intf_if_type,
+					 &q->phba->sli4_hba.sli_intf);
+			if (if_type != LPFC_SLI_INTF_IF_TYPE_6)
+				bf_set(lpfc_wq_db_list_fm_index, &doorbell,
+				       host_index);
+		}
+	} else if (q->db_format == LPFC_DB_RING_FORMAT) {
+		bf_set(lpfc_wq_db_ring_fm_num_posted, &doorbell, 1);
+		bf_set(lpfc_wq_db_ring_fm_id, &doorbell, q->queue_id);
+	} else {
+		return -EINVAL;
+	}
+	writel(doorbell.word0, q->db_regaddr);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli4_wq_release - Updates internal hba index for WQ
+ * @q: The Work Queue to operate on.
+ * @index: The index to advance the hba index to.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * Work Queue Entries by the HBA. When the HBA indicates that it has consumed
+ * an entry the host calls this function to update the queue's internal
+ * pointers.
+ **/
+static void
+lpfc_sli4_wq_release(struct lpfc_queue *q, uint32_t index)
+{
+	/* sanity check on queue memory */
+	if (unlikely(!q))
+		return;
+
+	q->hba_index = index;
+}
+
+/**
+ * lpfc_sli4_mq_put - Put a Mailbox Queue Entry on an Mailbox Queue
+ * @q: The Mailbox Queue to operate on.
+ * @mqe: The Mailbox Queue Entry to put on the Work queue.
+ *
+ * This routine will copy the contents of @mqe to the next available entry on
+ * the @q. This function will then ring the Work Queue Doorbell to signal the
+ * HBA to start processing the Work Queue Entry. This function returns 0 if
+ * successful. If no entries are available on @q then this function will return
+ * -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static uint32_t
+lpfc_sli4_mq_put(struct lpfc_queue *q, struct lpfc_mqe *mqe)
+{
+	struct lpfc_mqe *temp_mqe;
+	struct lpfc_register doorbell;
+
+	/* sanity check on queue memory */
+	if (unlikely(!q))
+		return -ENOMEM;
+	temp_mqe = lpfc_sli4_qe(q, q->host_index);
+
+	/* If the host has not yet processed the next entry then we are done */
+	if (((q->host_index + 1) % q->entry_count) == q->hba_index)
+		return -ENOMEM;
+	lpfc_sli4_pcimem_bcopy(mqe, temp_mqe, q->entry_size);
+	/* Save off the mailbox pointer for completion */
+	q->phba->mbox = (MAILBOX_t *)temp_mqe;
+
+	/* Update the host index before invoking device */
+	q->host_index = ((q->host_index + 1) % q->entry_count);
+
+	/* Ring Doorbell */
+	doorbell.word0 = 0;
+	bf_set(lpfc_mq_doorbell_num_posted, &doorbell, 1);
+	bf_set(lpfc_mq_doorbell_id, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.MQDBregaddr);
+	return 0;
+}
+
+/**
+ * lpfc_sli4_mq_release - Updates internal hba index for MQ
+ * @q: The Mailbox Queue to operate on.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * a Mailbox Queue Entry by the HBA. When the HBA indicates that it has consumed
+ * an entry the host calls this function to update the queue's internal
+ * pointers. This routine returns the number of entries that were consumed by
+ * the HBA.
+ **/
+static uint32_t
+lpfc_sli4_mq_release(struct lpfc_queue *q)
+{
+	/* sanity check on queue memory */
+	if (unlikely(!q))
+		return 0;
+
+	/* Clear the mailbox pointer for completion */
+	q->phba->mbox = NULL;
+	q->hba_index = ((q->hba_index + 1) % q->entry_count);
+	return 1;
+}
+
+/**
+ * lpfc_sli4_eq_get - Gets the next valid EQE from a EQ
+ * @q: The Event Queue to get the first valid EQE from
+ *
+ * This routine will get the first valid Event Queue Entry from @q, update
+ * the queue's internal hba index, and return the EQE. If no valid EQEs are in
+ * the Queue (no more work to do), or the Queue is full of EQEs that have been
+ * processed, but not popped back to the HBA then this routine will return NULL.
+ **/
+static struct lpfc_eqe *
+lpfc_sli4_eq_get(struct lpfc_queue *q)
+{
+	struct lpfc_eqe *eqe;
+
+	/* sanity check on queue memory */
+	if (unlikely(!q))
+		return NULL;
+	eqe = lpfc_sli4_qe(q, q->host_index);
+
+	/* If the next EQE is not valid then we are done */
+	if (bf_get_le32(lpfc_eqe_valid, eqe) != q->qe_valid)
+		return NULL;
+
+	/*
+	 * insert barrier for instruction interlock : data from the hardware
+	 * must have the valid bit checked before it can be copied and acted
+	 * upon. Speculative instructions were allowing a bcopy at the start
+	 * of lpfc_sli4_fp_handle_wcqe(), which is called immediately
+	 * after our return, to copy data before the valid bit check above
+	 * was done. As such, some of the copied data was stale. The barrier
+	 * ensures the check is before any data is copied.
+	 */
+	mb();
+	return eqe;
+}
+
+/**
+ * lpfc_sli4_eq_clr_intr - Turn off interrupts from this EQ
+ * @q: The Event Queue to disable interrupts
+ *
+ **/
+void
+lpfc_sli4_eq_clr_intr(struct lpfc_queue *q)
+{
+	struct lpfc_register doorbell;
+
+	doorbell.word0 = 0;
+	bf_set(lpfc_eqcq_doorbell_eqci, &doorbell, 1);
+	bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
+	bf_set(lpfc_eqcq_doorbell_eqid_hi, &doorbell,
+		(q->queue_id >> LPFC_EQID_HI_FIELD_SHIFT));
+	bf_set(lpfc_eqcq_doorbell_eqid_lo, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.EQDBregaddr);
+}
+
+/**
+ * lpfc_sli4_if6_eq_clr_intr - Turn off interrupts from this EQ
+ * @q: The Event Queue to disable interrupts
+ *
+ **/
+void
+lpfc_sli4_if6_eq_clr_intr(struct lpfc_queue *q)
+{
+	struct lpfc_register doorbell;
+
+	doorbell.word0 = 0;
+	bf_set(lpfc_if6_eq_doorbell_eqid, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.EQDBregaddr);
+}
+
+/**
+ * lpfc_sli4_write_eq_db - write EQ DB for eqe's consumed or arm state
+ * @phba: adapter with EQ
+ * @q: The Event Queue that the host has completed processing for.
+ * @count: Number of elements that have been consumed
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will notify the HBA, by ringing the doorbell, that count
+ * number of EQEs have been processed. The @arm parameter indicates whether
+ * the queue should be rearmed when ringing the doorbell.
+ **/
+void
+lpfc_sli4_write_eq_db(struct lpfc_hba *phba, struct lpfc_queue *q,
+		     uint32_t count, bool arm)
+{
+	struct lpfc_register doorbell;
+
+	/* sanity check on queue memory */
+	if (unlikely(!q || (count == 0 && !arm)))
+		return;
+
+	/* ring doorbell for number popped */
+	doorbell.word0 = 0;
+	if (arm) {
+		bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
+		bf_set(lpfc_eqcq_doorbell_eqci, &doorbell, 1);
+	}
+	bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, count);
+	bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
+	bf_set(lpfc_eqcq_doorbell_eqid_hi, &doorbell,
+			(q->queue_id >> LPFC_EQID_HI_FIELD_SHIFT));
+	bf_set(lpfc_eqcq_doorbell_eqid_lo, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.EQDBregaddr);
+	/* PCI read to flush PCI pipeline on re-arming for INTx mode */
+	if ((q->phba->intr_type == INTx) && (arm == LPFC_QUEUE_REARM))
+		readl(q->phba->sli4_hba.EQDBregaddr);
+}
+
+/**
+ * lpfc_sli4_if6_write_eq_db - write EQ DB for eqe's consumed or arm state
+ * @phba: adapter with EQ
+ * @q: The Event Queue that the host has completed processing for.
+ * @count: Number of elements that have been consumed
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will notify the HBA, by ringing the doorbell, that count
+ * number of EQEs have been processed. The @arm parameter indicates whether
+ * the queue should be rearmed when ringing the doorbell.
+ **/
+void
+lpfc_sli4_if6_write_eq_db(struct lpfc_hba *phba, struct lpfc_queue *q,
+			  uint32_t count, bool arm)
+{
+	struct lpfc_register doorbell;
+
+	/* sanity check on queue memory */
+	if (unlikely(!q || (count == 0 && !arm)))
+		return;
+
+	/* ring doorbell for number popped */
+	doorbell.word0 = 0;
+	if (arm)
+		bf_set(lpfc_if6_eq_doorbell_arm, &doorbell, 1);
+	bf_set(lpfc_if6_eq_doorbell_num_released, &doorbell, count);
+	bf_set(lpfc_if6_eq_doorbell_eqid, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.EQDBregaddr);
+	/* PCI read to flush PCI pipeline on re-arming for INTx mode */
+	if ((q->phba->intr_type == INTx) && (arm == LPFC_QUEUE_REARM))
+		readl(q->phba->sli4_hba.EQDBregaddr);
+}
+
+static void
+__lpfc_sli4_consume_eqe(struct lpfc_hba *phba, struct lpfc_queue *eq,
+			struct lpfc_eqe *eqe)
+{
+	if (!phba->sli4_hba.pc_sli4_params.eqav)
+		bf_set_le32(lpfc_eqe_valid, eqe, 0);
+
+	eq->host_index = ((eq->host_index + 1) % eq->entry_count);
+
+	/* if the index wrapped around, toggle the valid bit */
+	if (phba->sli4_hba.pc_sli4_params.eqav && !eq->host_index)
+		eq->qe_valid = (eq->qe_valid) ? 0 : 1;
+}
+
+static void
+lpfc_sli4_eqcq_flush(struct lpfc_hba *phba, struct lpfc_queue *eq)
+{
+	struct lpfc_eqe *eqe = NULL;
+	u32 eq_count = 0, cq_count = 0;
+	struct lpfc_cqe *cqe = NULL;
+	struct lpfc_queue *cq = NULL, *childq = NULL;
+	int cqid = 0;
+
+	/* walk all the EQ entries and drop on the floor */
+	eqe = lpfc_sli4_eq_get(eq);
+	while (eqe) {
+		/* Get the reference to the corresponding CQ */
+		cqid = bf_get_le32(lpfc_eqe_resource_id, eqe);
+		cq = NULL;
+
+		list_for_each_entry(childq, &eq->child_list, list) {
+			if (childq->queue_id == cqid) {
+				cq = childq;
+				break;
+			}
+		}
+		/* If CQ is valid, iterate through it and drop all the CQEs */
+		if (cq) {
+			cqe = lpfc_sli4_cq_get(cq);
+			while (cqe) {
+				__lpfc_sli4_consume_cqe(phba, cq, cqe);
+				cq_count++;
+				cqe = lpfc_sli4_cq_get(cq);
+			}
+			/* Clear and re-arm the CQ */
+			phba->sli4_hba.sli4_write_cq_db(phba, cq, cq_count,
+			    LPFC_QUEUE_REARM);
+			cq_count = 0;
+		}
+		__lpfc_sli4_consume_eqe(phba, eq, eqe);
+		eq_count++;
+		eqe = lpfc_sli4_eq_get(eq);
+	}
+
+	/* Clear and re-arm the EQ */
+	phba->sli4_hba.sli4_write_eq_db(phba, eq, eq_count, LPFC_QUEUE_REARM);
+}
+
+static int
+lpfc_sli4_process_eq(struct lpfc_hba *phba, struct lpfc_queue *eq,
+		     uint8_t rearm)
+{
+	struct lpfc_eqe *eqe;
+	int count = 0, consumed = 0;
+
+	if (cmpxchg(&eq->queue_claimed, 0, 1) != 0)
+		goto rearm_and_exit;
+
+	eqe = lpfc_sli4_eq_get(eq);
+	while (eqe) {
+		lpfc_sli4_hba_handle_eqe(phba, eq, eqe);
+		__lpfc_sli4_consume_eqe(phba, eq, eqe);
+
+		consumed++;
+		if (!(++count % eq->max_proc_limit))
+			break;
+
+		if (!(count % eq->notify_interval)) {
+			phba->sli4_hba.sli4_write_eq_db(phba, eq, consumed,
+							LPFC_QUEUE_NOARM);
+			consumed = 0;
+		}
+
+		eqe = lpfc_sli4_eq_get(eq);
+	}
+	eq->EQ_processed += count;
+
+	/* Track the max number of EQEs processed in 1 intr */
+	if (count > eq->EQ_max_eqe)
+		eq->EQ_max_eqe = count;
+
+	xchg(&eq->queue_claimed, 0);
+
+rearm_and_exit:
+	/* Always clear the EQ. */
+	phba->sli4_hba.sli4_write_eq_db(phba, eq, consumed, rearm);
+
+	return count;
+}
+
+/**
+ * lpfc_sli4_cq_get - Gets the next valid CQE from a CQ
+ * @q: The Completion Queue to get the first valid CQE from
+ *
+ * This routine will get the first valid Completion Queue Entry from @q, update
+ * the queue's internal hba index, and return the CQE. If no valid CQEs are in
+ * the Queue (no more work to do), or the Queue is full of CQEs that have been
+ * processed, but not popped back to the HBA then this routine will return NULL.
+ **/
+static struct lpfc_cqe *
+lpfc_sli4_cq_get(struct lpfc_queue *q)
+{
+	struct lpfc_cqe *cqe;
+
+	/* sanity check on queue memory */
+	if (unlikely(!q))
+		return NULL;
+	cqe = lpfc_sli4_qe(q, q->host_index);
+
+	/* If the next CQE is not valid then we are done */
+	if (bf_get_le32(lpfc_cqe_valid, cqe) != q->qe_valid)
+		return NULL;
+
+	/*
+	 * insert barrier for instruction interlock : data from the hardware
+	 * must have the valid bit checked before it can be copied and acted
+	 * upon. Given what was seen in lpfc_sli4_cq_get() of speculative
+	 * instructions allowing action on content before valid bit checked,
+	 * add barrier here as well. May not be needed as "content" is a
+	 * single 32-bit entity here (vs multi word structure for cq's).
+	 */
+	mb();
+	return cqe;
+}
+
+static void
+__lpfc_sli4_consume_cqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			struct lpfc_cqe *cqe)
+{
+	if (!phba->sli4_hba.pc_sli4_params.cqav)
+		bf_set_le32(lpfc_cqe_valid, cqe, 0);
+
+	cq->host_index = ((cq->host_index + 1) % cq->entry_count);
+
+	/* if the index wrapped around, toggle the valid bit */
+	if (phba->sli4_hba.pc_sli4_params.cqav && !cq->host_index)
+		cq->qe_valid = (cq->qe_valid) ? 0 : 1;
+}
+
+/**
+ * lpfc_sli4_write_cq_db - write cq DB for entries consumed or arm state.
+ * @phba: the adapter with the CQ
+ * @q: The Completion Queue that the host has completed processing for.
+ * @count: the number of elements that were consumed
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will notify the HBA, by ringing the doorbell, that the
+ * CQEs have been processed. The @arm parameter specifies whether the
+ * queue should be rearmed when ringing the doorbell.
+ **/
+void
+lpfc_sli4_write_cq_db(struct lpfc_hba *phba, struct lpfc_queue *q,
+		     uint32_t count, bool arm)
+{
+	struct lpfc_register doorbell;
+
+	/* sanity check on queue memory */
+	if (unlikely(!q || (count == 0 && !arm)))
+		return;
+
+	/* ring doorbell for number popped */
+	doorbell.word0 = 0;
+	if (arm)
+		bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
+	bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, count);
+	bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_COMPLETION);
+	bf_set(lpfc_eqcq_doorbell_cqid_hi, &doorbell,
+			(q->queue_id >> LPFC_CQID_HI_FIELD_SHIFT));
+	bf_set(lpfc_eqcq_doorbell_cqid_lo, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.CQDBregaddr);
+}
+
+/**
+ * lpfc_sli4_if6_write_cq_db - write cq DB for entries consumed or arm state.
+ * @phba: the adapter with the CQ
+ * @q: The Completion Queue that the host has completed processing for.
+ * @count: the number of elements that were consumed
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will notify the HBA, by ringing the doorbell, that the
+ * CQEs have been processed. The @arm parameter specifies whether the
+ * queue should be rearmed when ringing the doorbell.
+ **/
+void
+lpfc_sli4_if6_write_cq_db(struct lpfc_hba *phba, struct lpfc_queue *q,
+			 uint32_t count, bool arm)
+{
+	struct lpfc_register doorbell;
+
+	/* sanity check on queue memory */
+	if (unlikely(!q || (count == 0 && !arm)))
+		return;
+
+	/* ring doorbell for number popped */
+	doorbell.word0 = 0;
+	if (arm)
+		bf_set(lpfc_if6_cq_doorbell_arm, &doorbell, 1);
+	bf_set(lpfc_if6_cq_doorbell_num_released, &doorbell, count);
+	bf_set(lpfc_if6_cq_doorbell_cqid, &doorbell, q->queue_id);
+	writel(doorbell.word0, q->phba->sli4_hba.CQDBregaddr);
+}
+
+/*
+ * lpfc_sli4_rq_put - Put a Receive Buffer Queue Entry on a Receive Queue
+ *
+ * This routine will copy the contents of @wqe to the next available entry on
+ * the @q. This function will then ring the Receive Queue Doorbell to signal the
+ * HBA to start processing the Receive Queue Entry. This function returns the
+ * index that the rqe was copied to if successful. If no entries are available
+ * on @q then this function will return -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+int
+lpfc_sli4_rq_put(struct lpfc_queue *hq, struct lpfc_queue *dq,
+		 struct lpfc_rqe *hrqe, struct lpfc_rqe *drqe)
+{
+	struct lpfc_rqe *temp_hrqe;
+	struct lpfc_rqe *temp_drqe;
+	struct lpfc_register doorbell;
+	int hq_put_index;
+	int dq_put_index;
+
+	/* sanity check on queue memory */
+	if (unlikely(!hq) || unlikely(!dq))
+		return -ENOMEM;
+	hq_put_index = hq->host_index;
+	dq_put_index = dq->host_index;
+	temp_hrqe = lpfc_sli4_qe(hq, hq_put_index);
+	temp_drqe = lpfc_sli4_qe(dq, dq_put_index);
+
+	if (hq->type != LPFC_HRQ || dq->type != LPFC_DRQ)
+		return -EINVAL;
+	if (hq_put_index != dq_put_index)
+		return -EINVAL;
+	/* If the host has not yet processed the next entry then we are done */
+	if (((hq_put_index + 1) % hq->entry_count) == hq->hba_index)
+		return -EBUSY;
+	lpfc_sli4_pcimem_bcopy(hrqe, temp_hrqe, hq->entry_size);
+	lpfc_sli4_pcimem_bcopy(drqe, temp_drqe, dq->entry_size);
+
+	/* Update the host index to point to the next slot */
+	hq->host_index = ((hq_put_index + 1) % hq->entry_count);
+	dq->host_index = ((dq_put_index + 1) % dq->entry_count);
+	hq->RQ_buf_posted++;
+
+	/* Ring The Header Receive Queue Doorbell */
+	if (!(hq->host_index % hq->notify_interval)) {
+		doorbell.word0 = 0;
+		if (hq->db_format == LPFC_DB_RING_FORMAT) {
+			bf_set(lpfc_rq_db_ring_fm_num_posted, &doorbell,
+			       hq->notify_interval);
+			bf_set(lpfc_rq_db_ring_fm_id, &doorbell, hq->queue_id);
+		} else if (hq->db_format == LPFC_DB_LIST_FORMAT) {
+			bf_set(lpfc_rq_db_list_fm_num_posted, &doorbell,
+			       hq->notify_interval);
+			bf_set(lpfc_rq_db_list_fm_index, &doorbell,
+			       hq->host_index);
+			bf_set(lpfc_rq_db_list_fm_id, &doorbell, hq->queue_id);
+		} else {
+			return -EINVAL;
+		}
+		writel(doorbell.word0, hq->db_regaddr);
+	}
+	return hq_put_index;
+}
+
+/*
+ * lpfc_sli4_rq_release - Updates internal hba index for RQ
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * one Receive Queue Entry by the HBA. When the HBA indicates that it has
+ * consumed an entry the host calls this function to update the queue's
+ * internal pointers. This routine returns the number of entries that were
+ * consumed by the HBA.
+ **/
+static uint32_t
+lpfc_sli4_rq_release(struct lpfc_queue *hq, struct lpfc_queue *dq)
+{
+	/* sanity check on queue memory */
+	if (unlikely(!hq) || unlikely(!dq))
+		return 0;
+
+	if ((hq->type != LPFC_HRQ) || (dq->type != LPFC_DRQ))
+		return 0;
+	hq->hba_index = ((hq->hba_index + 1) % hq->entry_count);
+	dq->hba_index = ((dq->hba_index + 1) % dq->entry_count);
+	return 1;
+}
+
+/**
+ * lpfc_cmd_iocb - Get next command iocb entry in the ring
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ *
+ * This function returns pointer to next command iocb entry
+ * in the command ring. The caller must hold hbalock to prevent
+ * other threads consume the next command iocb.
+ * SLI-2/SLI-3 provide different sized iocbs.
+ **/
+static inline IOCB_t *
+lpfc_cmd_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
+{
+	return (IOCB_t *) (((char *) pring->sli.sli3.cmdringaddr) +
+			   pring->sli.sli3.cmdidx * phba->iocb_cmd_size);
+}
+
+/**
+ * lpfc_resp_iocb - Get next response iocb entry in the ring
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ *
+ * This function returns pointer to next response iocb entry
+ * in the response ring. The caller must hold hbalock to make sure
+ * that no other thread consume the next response iocb.
+ * SLI-2/SLI-3 provide different sized iocbs.
+ **/
+static inline IOCB_t *
+lpfc_resp_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
+{
+	return (IOCB_t *) (((char *) pring->sli.sli3.rspringaddr) +
+			   pring->sli.sli3.rspidx * phba->iocb_rsp_size);
+}
+
+/**
+ * __lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with hbalock held. This function
+ * allocates a new driver iocb object from the iocb pool. If the
+ * allocation is successful, it returns pointer to the newly
+ * allocated iocb object else it returns NULL.
+ **/
+struct lpfc_iocbq *
+__lpfc_sli_get_iocbq(struct lpfc_hba *phba)
+{
+	struct list_head *lpfc_iocb_list = &phba->lpfc_iocb_list;
+	struct lpfc_iocbq * iocbq = NULL;
+
+	lockdep_assert_held(&phba->hbalock);
+
+	list_remove_head(lpfc_iocb_list, iocbq, struct lpfc_iocbq, list);
+	if (iocbq)
+		phba->iocb_cnt++;
+	if (phba->iocb_cnt > phba->iocb_max)
+		phba->iocb_max = phba->iocb_cnt;
+	return iocbq;
+}
+
+/**
+ * __lpfc_clear_active_sglq - Remove the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function clears the sglq pointer from the array of active
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+struct lpfc_sglq *
+__lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+	struct lpfc_sglq *sglq;
+
+	sglq = phba->sli4_hba.lpfc_sglq_active_list[xritag];
+	phba->sli4_hba.lpfc_sglq_active_list[xritag] = NULL;
+	return sglq;
+}
+
+/**
+ * __lpfc_get_active_sglq - Get the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function returns the sglq pointer from the array of active
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+struct lpfc_sglq *
+__lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+	struct lpfc_sglq *sglq;
+
+	sglq =  phba->sli4_hba.lpfc_sglq_active_list[xritag];
+	return sglq;
+}
+
+/**
+ * lpfc_clr_rrq_active - Clears RRQ active bit in xri_bitmap.
+ * @phba: Pointer to HBA context object.
+ * @xritag: xri used in this exchange.
+ * @rrq: The RRQ to be cleared.
+ *
+ **/
+void
+lpfc_clr_rrq_active(struct lpfc_hba *phba,
+		    uint16_t xritag,
+		    struct lpfc_node_rrq *rrq)
+{
+	struct lpfc_nodelist *ndlp = NULL;
+
+	/* Lookup did to verify if did is still active on this vport */
+	if (rrq->vport)
+		ndlp = lpfc_findnode_did(rrq->vport, rrq->nlp_DID);
+
+	if (!ndlp)
+		goto out;
+
+	if (test_and_clear_bit(xritag, ndlp->active_rrqs_xri_bitmap)) {
+		rrq->send_rrq = 0;
+		rrq->xritag = 0;
+		rrq->rrq_stop_time = 0;
+	}
+out:
+	mempool_free(rrq, phba->rrq_pool);
+}
+
+/**
+ * lpfc_handle_rrq_active - Checks if RRQ has waithed RATOV.
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with hbalock held. This function
+ * Checks if stop_time (ratov from setting rrq active) has
+ * been reached, if it has and the send_rrq flag is set then
+ * it will call lpfc_send_rrq. If the send_rrq flag is not set
+ * then it will just call the routine to clear the rrq and
+ * free the rrq resource.
+ * The timer is set to the next rrq that is going to expire before
+ * leaving the routine.
+ *
+ **/
+void
+lpfc_handle_rrq_active(struct lpfc_hba *phba)
+{
+	struct lpfc_node_rrq *rrq;
+	struct lpfc_node_rrq *nextrrq;
+	unsigned long next_time;
+	unsigned long iflags;
+	LIST_HEAD(send_rrq);
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	phba->hba_flag &= ~HBA_RRQ_ACTIVE;
+	next_time = jiffies + msecs_to_jiffies(1000 * (phba->fc_ratov + 1));
+	list_for_each_entry_safe(rrq, nextrrq,
+				 &phba->active_rrq_list, list) {
+		if (time_after(jiffies, rrq->rrq_stop_time))
+			list_move(&rrq->list, &send_rrq);
+		else if (time_before(rrq->rrq_stop_time, next_time))
+			next_time = rrq->rrq_stop_time;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	if ((!list_empty(&phba->active_rrq_list)) &&
+	    (!(phba->pport->load_flag & FC_UNLOADING)))
+		mod_timer(&phba->rrq_tmr, next_time);
+	list_for_each_entry_safe(rrq, nextrrq, &send_rrq, list) {
+		list_del(&rrq->list);
+		if (!rrq->send_rrq) {
+			/* this call will free the rrq */
+			lpfc_clr_rrq_active(phba, rrq->xritag, rrq);
+		} else if (lpfc_send_rrq(phba, rrq)) {
+			/* if we send the rrq then the completion handler
+			*  will clear the bit in the xribitmap.
+			*/
+			lpfc_clr_rrq_active(phba, rrq->xritag,
+					    rrq);
+		}
+	}
+}
+
+/**
+ * lpfc_get_active_rrq - Get the active RRQ for this exchange.
+ * @vport: Pointer to vport context object.
+ * @xri: The xri used in the exchange.
+ * @did: The targets DID for this exchange.
+ *
+ * returns NULL = rrq not found in the phba->active_rrq_list.
+ *         rrq = rrq for this xri and target.
+ **/
+struct lpfc_node_rrq *
+lpfc_get_active_rrq(struct lpfc_vport *vport, uint16_t xri, uint32_t did)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_node_rrq *rrq;
+	struct lpfc_node_rrq *nextrrq;
+	unsigned long iflags;
+
+	if (phba->sli_rev != LPFC_SLI_REV4)
+		return NULL;
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	list_for_each_entry_safe(rrq, nextrrq, &phba->active_rrq_list, list) {
+		if (rrq->vport == vport && rrq->xritag == xri &&
+				rrq->nlp_DID == did){
+			list_del(&rrq->list);
+			spin_unlock_irqrestore(&phba->hbalock, iflags);
+			return rrq;
+		}
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return NULL;
+}
+
+/**
+ * lpfc_cleanup_vports_rrqs - Remove and clear the active RRQ for this vport.
+ * @vport: Pointer to vport context object.
+ * @ndlp: Pointer to the lpfc_node_list structure.
+ * If ndlp is NULL Remove all active RRQs for this vport from the
+ * phba->active_rrq_list and clear the rrq.
+ * If ndlp is not NULL then only remove rrqs for this vport & this ndlp.
+ **/
+void
+lpfc_cleanup_vports_rrqs(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
+
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_node_rrq *rrq;
+	struct lpfc_node_rrq *nextrrq;
+	unsigned long iflags;
+	LIST_HEAD(rrq_list);
+
+	if (phba->sli_rev != LPFC_SLI_REV4)
+		return;
+	if (!ndlp) {
+		lpfc_sli4_vport_delete_els_xri_aborted(vport);
+		lpfc_sli4_vport_delete_fcp_xri_aborted(vport);
+	}
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	list_for_each_entry_safe(rrq, nextrrq, &phba->active_rrq_list, list) {
+		if (rrq->vport != vport)
+			continue;
+
+		if (!ndlp || ndlp == lpfc_findnode_did(vport, rrq->nlp_DID))
+			list_move(&rrq->list, &rrq_list);
+
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	list_for_each_entry_safe(rrq, nextrrq, &rrq_list, list) {
+		list_del(&rrq->list);
+		lpfc_clr_rrq_active(phba, rrq->xritag, rrq);
+	}
+}
+
+/**
+ * lpfc_test_rrq_active - Test RRQ bit in xri_bitmap.
+ * @phba: Pointer to HBA context object.
+ * @ndlp: Targets nodelist pointer for this exchange.
+ * @xritag: the xri in the bitmap to test.
+ *
+ * This function returns:
+ * 0 = rrq not active for this xri
+ * 1 = rrq is valid for this xri.
+ **/
+int
+lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
+			uint16_t  xritag)
+{
+	if (!ndlp)
+		return 0;
+	if (!ndlp->active_rrqs_xri_bitmap)
+		return 0;
+	if (test_bit(xritag, ndlp->active_rrqs_xri_bitmap))
+		return 1;
+	else
+		return 0;
+}
+
+/**
+ * lpfc_set_rrq_active - set RRQ active bit in xri_bitmap.
+ * @phba: Pointer to HBA context object.
+ * @ndlp: nodelist pointer for this target.
+ * @xritag: xri used in this exchange.
+ * @rxid: Remote Exchange ID.
+ * @send_rrq: Flag used to determine if we should send rrq els cmd.
+ *
+ * This function takes the hbalock.
+ * The active bit is always set in the active rrq xri_bitmap even
+ * if there is no slot avaiable for the other rrq information.
+ *
+ * returns 0 rrq actived for this xri
+ *         < 0 No memory or invalid ndlp.
+ **/
+int
+lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
+		    uint16_t xritag, uint16_t rxid, uint16_t send_rrq)
+{
+	unsigned long iflags;
+	struct lpfc_node_rrq *rrq;
+	int empty;
+
+	if (!ndlp)
+		return -EINVAL;
+
+	if (!phba->cfg_enable_rrq)
+		return -EINVAL;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	if (phba->pport->load_flag & FC_UNLOADING) {
+		phba->hba_flag &= ~HBA_RRQ_ACTIVE;
+		goto out;
+	}
+
+	if (ndlp->vport && (ndlp->vport->load_flag & FC_UNLOADING))
+		goto out;
+
+	if (!ndlp->active_rrqs_xri_bitmap)
+		goto out;
+
+	if (test_and_set_bit(xritag, ndlp->active_rrqs_xri_bitmap))
+		goto out;
+
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	rrq = mempool_alloc(phba->rrq_pool, GFP_ATOMIC);
+	if (!rrq) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"3155 Unable to allocate RRQ xri:0x%x rxid:0x%x"
+				" DID:0x%x Send:%d\n",
+				xritag, rxid, ndlp->nlp_DID, send_rrq);
+		return -EINVAL;
+	}
+	if (phba->cfg_enable_rrq == 1)
+		rrq->send_rrq = send_rrq;
+	else
+		rrq->send_rrq = 0;
+	rrq->xritag = xritag;
+	rrq->rrq_stop_time = jiffies +
+				msecs_to_jiffies(1000 * (phba->fc_ratov + 1));
+	rrq->nlp_DID = ndlp->nlp_DID;
+	rrq->vport = ndlp->vport;
+	rrq->rxid = rxid;
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	empty = list_empty(&phba->active_rrq_list);
+	list_add_tail(&rrq->list, &phba->active_rrq_list);
+	phba->hba_flag |= HBA_RRQ_ACTIVE;
+	if (empty)
+		lpfc_worker_wake_up(phba);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return 0;
+out:
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"2921 Can't set rrq active xri:0x%x rxid:0x%x"
+			" DID:0x%x Send:%d\n",
+			xritag, rxid, ndlp->nlp_DID, send_rrq);
+	return -EINVAL;
+}
+
+/**
+ * __lpfc_sli_get_els_sglq - Allocates an iocb object from sgl pool
+ * @phba: Pointer to HBA context object.
+ * @piocbq: Pointer to the iocbq.
+ *
+ * The driver calls this function with either the nvme ls ring lock
+ * or the fc els ring lock held depending on the iocb usage.  This function
+ * gets a new driver sglq object from the sglq list. If the list is not empty
+ * then it is successful, it returns pointer to the newly allocated sglq
+ * object else it returns NULL.
+ **/
+static struct lpfc_sglq *
+__lpfc_sli_get_els_sglq(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq)
+{
+	struct list_head *lpfc_els_sgl_list = &phba->sli4_hba.lpfc_els_sgl_list;
+	struct lpfc_sglq *sglq = NULL;
+	struct lpfc_sglq *start_sglq = NULL;
+	struct lpfc_io_buf *lpfc_cmd;
+	struct lpfc_nodelist *ndlp;
+	int found = 0;
+	u8 cmnd;
+
+	cmnd = get_job_cmnd(phba, piocbq);
+
+	if (piocbq->cmd_flag & LPFC_IO_FCP) {
+		lpfc_cmd = piocbq->io_buf;
+		ndlp = lpfc_cmd->rdata->pnode;
+	} else  if ((cmnd == CMD_GEN_REQUEST64_CR) &&
+			!(piocbq->cmd_flag & LPFC_IO_LIBDFC)) {
+		ndlp = piocbq->ndlp;
+	} else  if (piocbq->cmd_flag & LPFC_IO_LIBDFC) {
+		if (piocbq->cmd_flag & LPFC_IO_LOOPBACK)
+			ndlp = NULL;
+		else
+			ndlp = piocbq->ndlp;
+	} else {
+		ndlp = piocbq->ndlp;
+	}
+
+	spin_lock(&phba->sli4_hba.sgl_list_lock);
+	list_remove_head(lpfc_els_sgl_list, sglq, struct lpfc_sglq, list);
+	start_sglq = sglq;
+	while (!found) {
+		if (!sglq)
+			break;
+		if (ndlp && ndlp->active_rrqs_xri_bitmap &&
+		    test_bit(sglq->sli4_lxritag,
+		    ndlp->active_rrqs_xri_bitmap)) {
+			/* This xri has an rrq outstanding for this DID.
+			 * put it back in the list and get another xri.
+			 */
+			list_add_tail(&sglq->list, lpfc_els_sgl_list);
+			sglq = NULL;
+			list_remove_head(lpfc_els_sgl_list, sglq,
+						struct lpfc_sglq, list);
+			if (sglq == start_sglq) {
+				list_add_tail(&sglq->list, lpfc_els_sgl_list);
+				sglq = NULL;
+				break;
+			} else
+				continue;
+		}
+		sglq->ndlp = ndlp;
+		found = 1;
+		phba->sli4_hba.lpfc_sglq_active_list[sglq->sli4_lxritag] = sglq;
+		sglq->state = SGL_ALLOCATED;
+	}
+	spin_unlock(&phba->sli4_hba.sgl_list_lock);
+	return sglq;
+}
+
+/**
+ * __lpfc_sli_get_nvmet_sglq - Allocates an iocb object from sgl pool
+ * @phba: Pointer to HBA context object.
+ * @piocbq: Pointer to the iocbq.
+ *
+ * This function is called with the sgl_list lock held. This function
+ * gets a new driver sglq object from the sglq list. If the
+ * list is not empty then it is successful, it returns pointer to the newly
+ * allocated sglq object else it returns NULL.
+ **/
+struct lpfc_sglq *
+__lpfc_sli_get_nvmet_sglq(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq)
+{
+	struct list_head *lpfc_nvmet_sgl_list;
+	struct lpfc_sglq *sglq = NULL;
+
+	lpfc_nvmet_sgl_list = &phba->sli4_hba.lpfc_nvmet_sgl_list;
+
+	lockdep_assert_held(&phba->sli4_hba.sgl_list_lock);
+
+	list_remove_head(lpfc_nvmet_sgl_list, sglq, struct lpfc_sglq, list);
+	if (!sglq)
+		return NULL;
+	phba->sli4_hba.lpfc_sglq_active_list[sglq->sli4_lxritag] = sglq;
+	sglq->state = SGL_ALLOCATED;
+	return sglq;
+}
+
+/**
+ * lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with no lock held. This function
+ * allocates a new driver iocb object from the iocb pool. If the
+ * allocation is successful, it returns pointer to the newly
+ * allocated iocb object else it returns NULL.
+ **/
+struct lpfc_iocbq *
+lpfc_sli_get_iocbq(struct lpfc_hba *phba)
+{
+	struct lpfc_iocbq * iocbq = NULL;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	iocbq = __lpfc_sli_get_iocbq(phba);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return iocbq;
+}
+
+/**
+ * __lpfc_sli_release_iocbq_s4 - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called to release the driver iocb object
+ * to the iocb pool. The iotag in the iocb object
+ * does not change for each use of the iocb object. This function
+ * clears all other fields of the iocb object when it is freed.
+ * The sqlq structure that holds the xritag and phys and virtual
+ * mappings for the scatter gather list is retrieved from the
+ * active array of sglq. The get of the sglq pointer also clears
+ * the entry in the array. If the status of the IO indiactes that
+ * this IO was aborted then the sglq entry it put on the
+ * lpfc_abts_els_sgl_list until the CQ_ABORTED_XRI is received. If the
+ * IO has good status or fails for any other reason then the sglq
+ * entry is added to the free list (lpfc_els_sgl_list). The hbalock is
+ *  asserted held in the code path calling this routine.
+ **/
+static void
+__lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+	struct lpfc_sglq *sglq;
+	size_t start_clean = offsetof(struct lpfc_iocbq, wqe);
+	unsigned long iflag = 0;
+	struct lpfc_sli_ring *pring;
+
+	if (iocbq->sli4_xritag == NO_XRI)
+		sglq = NULL;
+	else
+		sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_lxritag);
+
+
+	if (sglq)  {
+		if (iocbq->cmd_flag & LPFC_IO_NVMET) {
+			spin_lock_irqsave(&phba->sli4_hba.sgl_list_lock,
+					  iflag);
+			sglq->state = SGL_FREED;
+			sglq->ndlp = NULL;
+			list_add_tail(&sglq->list,
+				      &phba->sli4_hba.lpfc_nvmet_sgl_list);
+			spin_unlock_irqrestore(
+				&phba->sli4_hba.sgl_list_lock, iflag);
+			goto out;
+		}
+
+		if ((iocbq->cmd_flag & LPFC_EXCHANGE_BUSY) &&
+		    (!(unlikely(pci_channel_offline(phba->pcidev)))) &&
+		    sglq->state != SGL_XRI_ABORTED) {
+			spin_lock_irqsave(&phba->sli4_hba.sgl_list_lock,
+					  iflag);
+
+			/* Check if we can get a reference on ndlp */
+			if (sglq->ndlp && !lpfc_nlp_get(sglq->ndlp))
+				sglq->ndlp = NULL;
+
+			list_add(&sglq->list,
+				 &phba->sli4_hba.lpfc_abts_els_sgl_list);
+			spin_unlock_irqrestore(
+				&phba->sli4_hba.sgl_list_lock, iflag);
+		} else {
+			spin_lock_irqsave(&phba->sli4_hba.sgl_list_lock,
+					  iflag);
+			sglq->state = SGL_FREED;
+			sglq->ndlp = NULL;
+			list_add_tail(&sglq->list,
+				      &phba->sli4_hba.lpfc_els_sgl_list);
+			spin_unlock_irqrestore(
+				&phba->sli4_hba.sgl_list_lock, iflag);
+			pring = lpfc_phba_elsring(phba);
+			/* Check if TXQ queue needs to be serviced */
+			if (pring && (!list_empty(&pring->txq)))
+				lpfc_worker_wake_up(phba);
+		}
+	}
+
+out:
+	/*
+	 * Clean all volatile data fields, preserve iotag and node struct.
+	 */
+	memset((char *)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+	iocbq->sli4_lxritag = NO_XRI;
+	iocbq->sli4_xritag = NO_XRI;
+	iocbq->cmd_flag &= ~(LPFC_IO_NVME | LPFC_IO_NVMET | LPFC_IO_CMF |
+			      LPFC_IO_NVME_LS);
+	list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
+}
+
+
+/**
+ * __lpfc_sli_release_iocbq_s3 - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called to release the driver iocb object to the
+ * iocb pool. The iotag in the iocb object does not change for each
+ * use of the iocb object. This function clears all other fields of
+ * the iocb object when it is freed. The hbalock is asserted held in
+ * the code path calling this routine.
+ **/
+static void
+__lpfc_sli_release_iocbq_s3(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+	size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
+
+	/*
+	 * Clean all volatile data fields, preserve iotag and node struct.
+	 */
+	memset((char*)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+	iocbq->sli4_xritag = NO_XRI;
+	list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
+}
+
+/**
+ * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called with hbalock held to release driver
+ * iocb object to the iocb pool. The iotag in the iocb object
+ * does not change for each use of the iocb object. This function
+ * clears all other fields of the iocb object when it is freed.
+ **/
+static void
+__lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+	lockdep_assert_held(&phba->hbalock);
+
+	phba->__lpfc_sli_release_iocbq(phba, iocbq);
+	phba->iocb_cnt--;
+}
+
+/**
+ * lpfc_sli_release_iocbq - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called with no lock held to release the iocb to
+ * iocb pool.
+ **/
+void
+lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+	unsigned long iflags;
+
+	/*
+	 * Clean all volatile data fields, preserve iotag and node struct.
+	 */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	__lpfc_sli_release_iocbq(phba, iocbq);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+}
+
+/**
+ * lpfc_sli_cancel_iocbs - Cancel all iocbs from a list.
+ * @phba: Pointer to HBA context object.
+ * @iocblist: List of IOCBs.
+ * @ulpstatus: ULP status in IOCB command field.
+ * @ulpWord4: ULP word-4 in IOCB command field.
+ *
+ * This function is called with a list of IOCBs to cancel. It cancels the IOCB
+ * on the list by invoking the complete callback function associated with the
+ * IOCB with the provided @ulpstatus and @ulpword4 set to the IOCB commond
+ * fields.
+ **/
+void
+lpfc_sli_cancel_iocbs(struct lpfc_hba *phba, struct list_head *iocblist,
+		      uint32_t ulpstatus, uint32_t ulpWord4)
+{
+	struct lpfc_iocbq *piocb;
+
+	while (!list_empty(iocblist)) {
+		list_remove_head(iocblist, piocb, struct lpfc_iocbq, list);
+		if (piocb->cmd_cmpl) {
+			if (piocb->cmd_flag & LPFC_IO_NVME) {
+				lpfc_nvme_cancel_iocb(phba, piocb,
+						      ulpstatus, ulpWord4);
+			} else {
+				if (phba->sli_rev == LPFC_SLI_REV4) {
+					bf_set(lpfc_wcqe_c_status,
+					       &piocb->wcqe_cmpl, ulpstatus);
+					piocb->wcqe_cmpl.parameter = ulpWord4;
+				} else {
+					piocb->iocb.ulpStatus = ulpstatus;
+					piocb->iocb.un.ulpWord[4] = ulpWord4;
+				}
+				(piocb->cmd_cmpl) (phba, piocb, piocb);
+			}
+		} else {
+			lpfc_sli_release_iocbq(phba, piocb);
+		}
+	}
+	return;
+}
+
+/**
+ * lpfc_sli_iocb_cmd_type - Get the iocb type
+ * @iocb_cmnd: iocb command code.
+ *
+ * This function is called by ring event handler function to get the iocb type.
+ * This function translates the iocb command to an iocb command type used to
+ * decide the final disposition of each completed IOCB.
+ * The function returns
+ * LPFC_UNKNOWN_IOCB if it is an unsupported iocb
+ * LPFC_SOL_IOCB     if it is a solicited iocb completion
+ * LPFC_ABORT_IOCB   if it is an abort iocb
+ * LPFC_UNSOL_IOCB   if it is an unsolicited iocb
+ *
+ * The caller is not required to hold any lock.
+ **/
+static lpfc_iocb_type
+lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
+{
+	lpfc_iocb_type type = LPFC_UNKNOWN_IOCB;
+
+	if (iocb_cmnd > CMD_MAX_IOCB_CMD)
+		return 0;
+
+	switch (iocb_cmnd) {
+	case CMD_XMIT_SEQUENCE_CR:
+	case CMD_XMIT_SEQUENCE_CX:
+	case CMD_XMIT_BCAST_CN:
+	case CMD_XMIT_BCAST_CX:
+	case CMD_ELS_REQUEST_CR:
+	case CMD_ELS_REQUEST_CX:
+	case CMD_CREATE_XRI_CR:
+	case CMD_CREATE_XRI_CX:
+	case CMD_GET_RPI_CN:
+	case CMD_XMIT_ELS_RSP_CX:
+	case CMD_GET_RPI_CR:
+	case CMD_FCP_IWRITE_CR:
+	case CMD_FCP_IWRITE_CX:
+	case CMD_FCP_IREAD_CR:
+	case CMD_FCP_IREAD_CX:
+	case CMD_FCP_ICMND_CR:
+	case CMD_FCP_ICMND_CX:
+	case CMD_FCP_TSEND_CX:
+	case CMD_FCP_TRSP_CX:
+	case CMD_FCP_TRECEIVE_CX:
+	case CMD_FCP_AUTO_TRSP_CX:
+	case CMD_ADAPTER_MSG:
+	case CMD_ADAPTER_DUMP:
+	case CMD_XMIT_SEQUENCE64_CR:
+	case CMD_XMIT_SEQUENCE64_CX:
+	case CMD_XMIT_BCAST64_CN:
+	case CMD_XMIT_BCAST64_CX:
+	case CMD_ELS_REQUEST64_CR:
+	case CMD_ELS_REQUEST64_CX:
+	case CMD_FCP_IWRITE64_CR:
+	case CMD_FCP_IWRITE64_CX:
+	case CMD_FCP_IREAD64_CR:
+	case CMD_FCP_IREAD64_CX:
+	case CMD_FCP_ICMND64_CR:
+	case CMD_FCP_ICMND64_CX:
+	case CMD_FCP_TSEND64_CX:
+	case CMD_FCP_TRSP64_CX:
+	case CMD_FCP_TRECEIVE64_CX:
+	case CMD_GEN_REQUEST64_CR:
+	case CMD_GEN_REQUEST64_CX:
+	case CMD_XMIT_ELS_RSP64_CX:
+	case DSSCMD_IWRITE64_CR:
+	case DSSCMD_IWRITE64_CX:
+	case DSSCMD_IREAD64_CR:
+	case DSSCMD_IREAD64_CX:
+	case CMD_SEND_FRAME:
+		type = LPFC_SOL_IOCB;
+		break;
+	case CMD_ABORT_XRI_CN:
+	case CMD_ABORT_XRI_CX:
+	case CMD_CLOSE_XRI_CN:
+	case CMD_CLOSE_XRI_CX:
+	case CMD_XRI_ABORTED_CX:
+	case CMD_ABORT_MXRI64_CN:
+	case CMD_XMIT_BLS_RSP64_CX:
+		type = LPFC_ABORT_IOCB;
+		break;
+	case CMD_RCV_SEQUENCE_CX:
+	case CMD_RCV_ELS_REQ_CX:
+	case CMD_RCV_SEQUENCE64_CX:
+	case CMD_RCV_ELS_REQ64_CX:
+	case CMD_ASYNC_STATUS:
+	case CMD_IOCB_RCV_SEQ64_CX:
+	case CMD_IOCB_RCV_ELS64_CX:
+	case CMD_IOCB_RCV_CONT64_CX:
+	case CMD_IOCB_RET_XRI64_CX:
+		type = LPFC_UNSOL_IOCB;
+		break;
+	case CMD_IOCB_XMIT_MSEQ64_CR:
+	case CMD_IOCB_XMIT_MSEQ64_CX:
+	case CMD_IOCB_RCV_SEQ_LIST64_CX:
+	case CMD_IOCB_RCV_ELS_LIST64_CX:
+	case CMD_IOCB_CLOSE_EXTENDED_CN:
+	case CMD_IOCB_ABORT_EXTENDED_CN:
+	case CMD_IOCB_RET_HBQE64_CN:
+	case CMD_IOCB_FCP_IBIDIR64_CR:
+	case CMD_IOCB_FCP_IBIDIR64_CX:
+	case CMD_IOCB_FCP_ITASKMGT64_CX:
+	case CMD_IOCB_LOGENTRY_CN:
+	case CMD_IOCB_LOGENTRY_ASYNC_CN:
+		printk("%s - Unhandled SLI-3 Command x%x\n",
+				__func__, iocb_cmnd);
+		type = LPFC_UNKNOWN_IOCB;
+		break;
+	default:
+		type = LPFC_UNKNOWN_IOCB;
+		break;
+	}
+
+	return type;
+}
+
+/**
+ * lpfc_sli_ring_map - Issue config_ring mbox for all rings
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called from SLI initialization code
+ * to configure every ring of the HBA's SLI interface. The
+ * caller is not required to hold any lock. This function issues
+ * a config_ring mailbox command for each ring.
+ * This function returns zero if successful else returns a negative
+ * error code.
+ **/
+static int
+lpfc_sli_ring_map(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	LPFC_MBOXQ_t *pmb;
+	MAILBOX_t *pmbox;
+	int i, rc, ret = 0;
+
+	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb)
+		return -ENOMEM;
+	pmbox = &pmb->u.mb;
+	phba->link_state = LPFC_INIT_MBX_CMDS;
+	for (i = 0; i < psli->num_rings; i++) {
+		lpfc_config_ring(phba, i, pmb);
+		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+		if (rc != MBX_SUCCESS) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"0446 Adapter failed to init (%d), "
+					"mbxCmd x%x CFG_RING, mbxStatus x%x, "
+					"ring %d\n",
+					rc, pmbox->mbxCommand,
+					pmbox->mbxStatus, i);
+			phba->link_state = LPFC_HBA_ERROR;
+			ret = -ENXIO;
+			break;
+		}
+	}
+	mempool_free(pmb, phba->mbox_mem_pool);
+	return ret;
+}
+
+/**
+ * lpfc_sli_ringtxcmpl_put - Adds new iocb to the txcmplq
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @piocb: Pointer to the driver iocb object.
+ *
+ * The driver calls this function with the hbalock held for SLI3 ports or
+ * the ring lock held for SLI4 ports. The function adds the
+ * new iocb to txcmplq of the given ring. This function always returns
+ * 0. If this function is called for ELS ring, this function checks if
+ * there is a vport associated with the ELS command. This function also
+ * starts els_tmofunc timer if this is an ELS command.
+ **/
+static int
+lpfc_sli_ringtxcmpl_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			struct lpfc_iocbq *piocb)
+{
+	u32 ulp_command = 0;
+
+	BUG_ON(!piocb);
+	ulp_command = get_job_cmnd(phba, piocb);
+
+	list_add_tail(&piocb->list, &pring->txcmplq);
+	piocb->cmd_flag |= LPFC_IO_ON_TXCMPLQ;
+	pring->txcmplq_cnt++;
+	if ((unlikely(pring->ringno == LPFC_ELS_RING)) &&
+	   (ulp_command != CMD_ABORT_XRI_WQE) &&
+	   (ulp_command != CMD_ABORT_XRI_CN) &&
+	   (ulp_command != CMD_CLOSE_XRI_CN)) {
+		BUG_ON(!piocb->vport);
+		if (!(piocb->vport->load_flag & FC_UNLOADING))
+			mod_timer(&piocb->vport->els_tmofunc,
+				  jiffies +
+				  msecs_to_jiffies(1000 * (phba->fc_ratov << 1)));
+	}
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_ringtx_get - Get first element of the txq
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ *
+ * This function is called with hbalock held to get next
+ * iocb in txq of the given ring. If there is any iocb in
+ * the txq, the function returns first iocb in the list after
+ * removing the iocb from the list, else it returns NULL.
+ **/
+struct lpfc_iocbq *
+lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
+{
+	struct lpfc_iocbq *cmd_iocb;
+
+	lockdep_assert_held(&phba->hbalock);
+
+	list_remove_head((&pring->txq), cmd_iocb, struct lpfc_iocbq, list);
+	return cmd_iocb;
+}
+
+/**
+ * lpfc_cmf_sync_cmpl - Process a CMF_SYNC_WQE cmpl
+ * @phba: Pointer to HBA context object.
+ * @cmdiocb: Pointer to driver command iocb object.
+ * @rspiocb: Pointer to driver response iocb object.
+ *
+ * This routine will inform the driver of any BW adjustments we need
+ * to make. These changes will be picked up during the next CMF
+ * timer interrupt. In addition, any BW changes will be logged
+ * with LOG_CGN_MGMT.
+ **/
+static void
+lpfc_cmf_sync_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
+		   struct lpfc_iocbq *rspiocb)
+{
+	union lpfc_wqe128 *wqe;
+	uint32_t status, info;
+	struct lpfc_wcqe_complete *wcqe = &rspiocb->wcqe_cmpl;
+	uint64_t bw, bwdif, slop;
+	uint64_t pcent, bwpcent;
+	int asig, afpin, sigcnt, fpincnt;
+	int wsigmax, wfpinmax, cg, tdp;
+	char *s;
+
+	/* First check for error */
+	status = bf_get(lpfc_wcqe_c_status, wcqe);
+	if (status) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
+				"6211 CMF_SYNC_WQE Error "
+				"req_tag x%x status x%x hwstatus x%x "
+				"tdatap x%x parm x%x\n",
+				bf_get(lpfc_wcqe_c_request_tag, wcqe),
+				bf_get(lpfc_wcqe_c_status, wcqe),
+				bf_get(lpfc_wcqe_c_hw_status, wcqe),
+				wcqe->total_data_placed,
+				wcqe->parameter);
+		goto out;
+	}
+
+	/* Gather congestion information on a successful cmpl */
+	info = wcqe->parameter;
+	phba->cmf_active_info = info;
+
+	/* See if firmware info count is valid or has changed */
+	if (info > LPFC_MAX_CMF_INFO || phba->cmf_info_per_interval == info)
+		info = 0;
+	else
+		phba->cmf_info_per_interval = info;
+
+	tdp = bf_get(lpfc_wcqe_c_cmf_bw, wcqe);
+	cg = bf_get(lpfc_wcqe_c_cmf_cg, wcqe);
+
+	/* Get BW requirement from firmware */
+	bw = (uint64_t)tdp * LPFC_CMF_BLK_SIZE;
+	if (!bw) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
+				"6212 CMF_SYNC_WQE x%x: NULL bw\n",
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+		goto out;
+	}
+
+	/* Gather information needed for logging if a BW change is required */
+	wqe = &cmdiocb->wqe;
+	asig = bf_get(cmf_sync_asig, &wqe->cmf_sync);
+	afpin = bf_get(cmf_sync_afpin, &wqe->cmf_sync);
+	fpincnt = bf_get(cmf_sync_wfpincnt, &wqe->cmf_sync);
+	sigcnt = bf_get(cmf_sync_wsigcnt, &wqe->cmf_sync);
+	if (phba->cmf_max_bytes_per_interval != bw ||
+	    (asig || afpin || sigcnt || fpincnt)) {
+		/* Are we increasing or decreasing BW */
+		if (phba->cmf_max_bytes_per_interval <  bw) {
+			bwdif = bw - phba->cmf_max_bytes_per_interval;
+			s = "Increase";
+		} else {
+			bwdif = phba->cmf_max_bytes_per_interval - bw;
+			s = "Decrease";
+		}
+
+		/* What is the change percentage */
+		slop = div_u64(phba->cmf_link_byte_count, 200); /*For rounding*/
+		pcent = div64_u64(bwdif * 100 + slop,
+				  phba->cmf_link_byte_count);
+		bwpcent = div64_u64(bw * 100 + slop,
+				    phba->cmf_link_byte_count);
+		if (asig) {
+			lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
+					"6237 BW Threshold %lld%% (%lld): "
+					"%lld%% %s: Signal Alarm: cg:%d "
+					"Info:%u\n",
+					bwpcent, bw, pcent, s, cg,
+					phba->cmf_active_info);
+		} else if (afpin) {
+			lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
+					"6238 BW Threshold %lld%% (%lld): "
+					"%lld%% %s: FPIN Alarm: cg:%d "
+					"Info:%u\n",
+					bwpcent, bw, pcent, s, cg,
+					phba->cmf_active_info);
+		} else if (sigcnt) {
+			wsigmax = bf_get(cmf_sync_wsigmax, &wqe->cmf_sync);
+			lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
+					"6239 BW Threshold %lld%% (%lld): "
+					"%lld%% %s: Signal Warning: "
+					"Cnt %d Max %d: cg:%d Info:%u\n",
+					bwpcent, bw, pcent, s, sigcnt,
+					wsigmax, cg, phba->cmf_active_info);
+		} else if (fpincnt) {
+			wfpinmax = bf_get(cmf_sync_wfpinmax, &wqe->cmf_sync);
+			lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
+					"6240 BW Threshold %lld%% (%lld): "
+					"%lld%% %s: FPIN Warning: "
+					"Cnt %d Max %d: cg:%d Info:%u\n",
+					bwpcent, bw, pcent, s, fpincnt,
+					wfpinmax, cg, phba->cmf_active_info);
+		} else {
+			lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
+					"6241 BW Threshold %lld%% (%lld): "
+					"CMF %lld%% %s: cg:%d Info:%u\n",
+					bwpcent, bw, pcent, s, cg,
+					phba->cmf_active_info);
+		}
+	} else if (info) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
+				"6246 Info Threshold %u\n", info);
+	}
+
+	/* Save BW change to be picked up during next timer interrupt */
+	phba->cmf_last_sync_bw = bw;
+out:
+	lpfc_sli_release_iocbq(phba, cmdiocb);
+}
+
+/**
+ * lpfc_issue_cmf_sync_wqe - Issue a CMF_SYNC_WQE
+ * @phba: Pointer to HBA context object.
+ * @ms:   ms to set in WQE interval, 0 means use init op
+ * @total: Total rcv bytes for this interval
+ *
+ * This routine is called every CMF timer interrupt. Its purpose is
+ * to issue a CMF_SYNC_WQE to the firmware to inform it of any events
+ * that may indicate we have congestion (FPINs or Signals). Upon
+ * completion, the firmware will indicate any BW restrictions the
+ * driver may need to take.
+ **/
+int
+lpfc_issue_cmf_sync_wqe(struct lpfc_hba *phba, u32 ms, u64 total)
+{
+	union lpfc_wqe128 *wqe;
+	struct lpfc_iocbq *sync_buf;
+	unsigned long iflags;
+	u32 ret_val;
+	u32 atot, wtot, max;
+	u16 warn_sync_period = 0;
+
+	/* First address any alarm / warning activity */
+	atot = atomic_xchg(&phba->cgn_sync_alarm_cnt, 0);
+	wtot = atomic_xchg(&phba->cgn_sync_warn_cnt, 0);
+
+	/* ONLY Managed mode will send the CMF_SYNC_WQE to the HBA */
+	if (phba->cmf_active_mode != LPFC_CFG_MANAGED ||
+	    phba->link_state == LPFC_LINK_DOWN)
+		return 0;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	sync_buf = __lpfc_sli_get_iocbq(phba);
+	if (!sync_buf) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT,
+				"6244 No available WQEs for CMF_SYNC_WQE\n");
+		ret_val = ENOMEM;
+		goto out_unlock;
+	}
+
+	wqe = &sync_buf->wqe;
+
+	/* WQEs are reused.  Clear stale data and set key fields to zero */
+	memset(wqe, 0, sizeof(*wqe));
+
+	/* If this is the very first CMF_SYNC_WQE, issue an init operation */
+	if (!ms) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
+				"6441 CMF Init %d - CMF_SYNC_WQE\n",
+				phba->fc_eventTag);
+		bf_set(cmf_sync_op, &wqe->cmf_sync, 1); /* 1=init */
+		bf_set(cmf_sync_interval, &wqe->cmf_sync, LPFC_CMF_INTERVAL);
+		goto initpath;
+	}
+
+	bf_set(cmf_sync_op, &wqe->cmf_sync, 0); /* 0=recalc */
+	bf_set(cmf_sync_interval, &wqe->cmf_sync, ms);
+
+	/* Check for alarms / warnings */
+	if (atot) {
+		if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) {
+			/* We hit an Signal alarm condition */
+			bf_set(cmf_sync_asig, &wqe->cmf_sync, 1);
+		} else {
+			/* We hit a FPIN alarm condition */
+			bf_set(cmf_sync_afpin, &wqe->cmf_sync, 1);
+		}
+	} else if (wtot) {
+		if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ONLY ||
+		    phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) {
+			/* We hit an Signal warning condition */
+			max = LPFC_SEC_TO_MSEC / lpfc_fabric_cgn_frequency *
+				lpfc_acqe_cgn_frequency;
+			bf_set(cmf_sync_wsigmax, &wqe->cmf_sync, max);
+			bf_set(cmf_sync_wsigcnt, &wqe->cmf_sync, wtot);
+			warn_sync_period = lpfc_acqe_cgn_frequency;
+		} else {
+			/* We hit a FPIN warning condition */
+			bf_set(cmf_sync_wfpinmax, &wqe->cmf_sync, 1);
+			bf_set(cmf_sync_wfpincnt, &wqe->cmf_sync, 1);
+			if (phba->cgn_fpin_frequency != LPFC_FPIN_INIT_FREQ)
+				warn_sync_period =
+				LPFC_MSECS_TO_SECS(phba->cgn_fpin_frequency);
+		}
+	}
+
+	/* Update total read blocks during previous timer interval */
+	wqe->cmf_sync.read_bytes = (u32)(total / LPFC_CMF_BLK_SIZE);
+
+initpath:
+	bf_set(cmf_sync_ver, &wqe->cmf_sync, LPFC_CMF_SYNC_VER);
+	wqe->cmf_sync.event_tag = phba->fc_eventTag;
+	bf_set(cmf_sync_cmnd, &wqe->cmf_sync, CMD_CMF_SYNC_WQE);
+
+	/* Setup reqtag to match the wqe completion. */
+	bf_set(cmf_sync_reqtag, &wqe->cmf_sync, sync_buf->iotag);
+
+	bf_set(cmf_sync_qosd, &wqe->cmf_sync, 1);
+	bf_set(cmf_sync_period, &wqe->cmf_sync, warn_sync_period);
+
+	bf_set(cmf_sync_cmd_type, &wqe->cmf_sync, CMF_SYNC_COMMAND);
+	bf_set(cmf_sync_wqec, &wqe->cmf_sync, 1);
+	bf_set(cmf_sync_cqid, &wqe->cmf_sync, LPFC_WQE_CQ_ID_DEFAULT);
+
+	sync_buf->vport = phba->pport;
+	sync_buf->cmd_cmpl = lpfc_cmf_sync_cmpl;
+	sync_buf->cmd_dmabuf = NULL;
+	sync_buf->rsp_dmabuf = NULL;
+	sync_buf->bpl_dmabuf = NULL;
+	sync_buf->sli4_xritag = NO_XRI;
+
+	sync_buf->cmd_flag |= LPFC_IO_CMF;
+	ret_val = lpfc_sli4_issue_wqe(phba, &phba->sli4_hba.hdwq[0], sync_buf);
+	if (ret_val) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
+				"6214 Cannot issue CMF_SYNC_WQE: x%x\n",
+				ret_val);
+		__lpfc_sli_release_iocbq(phba, sync_buf);
+	}
+out_unlock:
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return ret_val;
+}
+
+/**
+ * lpfc_sli_next_iocb_slot - Get next iocb slot in the ring
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ *
+ * This function is called with hbalock held and the caller must post the
+ * iocb without releasing the lock. If the caller releases the lock,
+ * iocb slot returned by the function is not guaranteed to be available.
+ * The function returns pointer to the next available iocb slot if there
+ * is available slot in the ring, else it returns NULL.
+ * If the get index of the ring is ahead of the put index, the function
+ * will post an error attention event to the worker thread to take the
+ * HBA to offline state.
+ **/
+static IOCB_t *
+lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
+{
+	struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
+	uint32_t  max_cmd_idx = pring->sli.sli3.numCiocb;
+
+	lockdep_assert_held(&phba->hbalock);
+
+	if ((pring->sli.sli3.next_cmdidx == pring->sli.sli3.cmdidx) &&
+	   (++pring->sli.sli3.next_cmdidx >= max_cmd_idx))
+		pring->sli.sli3.next_cmdidx = 0;
+
+	if (unlikely(pring->sli.sli3.local_getidx ==
+		pring->sli.sli3.next_cmdidx)) {
+
+		pring->sli.sli3.local_getidx = le32_to_cpu(pgp->cmdGetInx);
+
+		if (unlikely(pring->sli.sli3.local_getidx >= max_cmd_idx)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"0315 Ring %d issue: portCmdGet %d "
+					"is bigger than cmd ring %d\n",
+					pring->ringno,
+					pring->sli.sli3.local_getidx,
+					max_cmd_idx);
+
+			phba->link_state = LPFC_HBA_ERROR;
+			/*
+			 * All error attention handlers are posted to
+			 * worker thread
+			 */
+			phba->work_ha |= HA_ERATT;
+			phba->work_hs = HS_FFER3;
+
+			lpfc_worker_wake_up(phba);
+
+			return NULL;
+		}
+
+		if (pring->sli.sli3.local_getidx == pring->sli.sli3.next_cmdidx)
+			return NULL;
+	}
+
+	return lpfc_cmd_iocb(phba, pring);
+}
+
+/**
+ * lpfc_sli_next_iotag - Get an iotag for the iocb
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function gets an iotag for the iocb. If there is no unused iotag and
+ * the iocbq_lookup_len < 0xffff, this function allocates a bigger iotag_lookup
+ * array and assigns a new iotag.
+ * The function returns the allocated iotag if successful, else returns zero.
+ * Zero is not a valid iotag.
+ * The caller is not required to hold any lock.
+ **/
+uint16_t
+lpfc_sli_next_iotag(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+	struct lpfc_iocbq **new_arr;
+	struct lpfc_iocbq **old_arr;
+	size_t new_len;
+	struct lpfc_sli *psli = &phba->sli;
+	uint16_t iotag;
+
+	spin_lock_irq(&phba->hbalock);
+	iotag = psli->last_iotag;
+	if(++iotag < psli->iocbq_lookup_len) {
+		psli->last_iotag = iotag;
+		psli->iocbq_lookup[iotag] = iocbq;
+		spin_unlock_irq(&phba->hbalock);
+		iocbq->iotag = iotag;
+		return iotag;
+	} else if (psli->iocbq_lookup_len < (0xffff
+					   - LPFC_IOCBQ_LOOKUP_INCREMENT)) {
+		new_len = psli->iocbq_lookup_len + LPFC_IOCBQ_LOOKUP_INCREMENT;
+		spin_unlock_irq(&phba->hbalock);
+		new_arr = kcalloc(new_len, sizeof(struct lpfc_iocbq *),
+				  GFP_KERNEL);
+		if (new_arr) {
+			spin_lock_irq(&phba->hbalock);
+			old_arr = psli->iocbq_lookup;
+			if (new_len <= psli->iocbq_lookup_len) {
+				/* highly unprobable case */
+				kfree(new_arr);
+				iotag = psli->last_iotag;
+				if(++iotag < psli->iocbq_lookup_len) {
+					psli->last_iotag = iotag;
+					psli->iocbq_lookup[iotag] = iocbq;
+					spin_unlock_irq(&phba->hbalock);
+					iocbq->iotag = iotag;
+					return iotag;
+				}
+				spin_unlock_irq(&phba->hbalock);
+				return 0;
+			}
+			if (psli->iocbq_lookup)
+				memcpy(new_arr, old_arr,
+				       ((psli->last_iotag  + 1) *
+					sizeof (struct lpfc_iocbq *)));
+			psli->iocbq_lookup = new_arr;
+			psli->iocbq_lookup_len = new_len;
+			psli->last_iotag = iotag;
+			psli->iocbq_lookup[iotag] = iocbq;
+			spin_unlock_irq(&phba->hbalock);
+			iocbq->iotag = iotag;
+			kfree(old_arr);
+			return iotag;
+		}
+	} else
+		spin_unlock_irq(&phba->hbalock);
+
+	lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+			"0318 Failed to allocate IOTAG.last IOTAG is %d\n",
+			psli->last_iotag);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_submit_iocb - Submit an iocb to the firmware
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @iocb: Pointer to iocb slot in the ring.
+ * @nextiocb: Pointer to driver iocb object which need to be
+ *            posted to firmware.
+ *
+ * This function is called to post a new iocb to the firmware. This
+ * function copies the new iocb to ring iocb slot and updates the
+ * ring pointers. It adds the new iocb to txcmplq if there is
+ * a completion call back for this iocb else the function will free the
+ * iocb object.  The hbalock is asserted held in the code path calling
+ * this routine.
+ **/
+static void
+lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+		IOCB_t *iocb, struct lpfc_iocbq *nextiocb)
+{
+	/*
+	 * Set up an iotag
+	 */
+	nextiocb->iocb.ulpIoTag = (nextiocb->cmd_cmpl) ? nextiocb->iotag : 0;
+
+
+	if (pring->ringno == LPFC_ELS_RING) {
+		lpfc_debugfs_slow_ring_trc(phba,
+			"IOCB cmd ring:   wd4:x%08x wd6:x%08x wd7:x%08x",
+			*(((uint32_t *) &nextiocb->iocb) + 4),
+			*(((uint32_t *) &nextiocb->iocb) + 6),
+			*(((uint32_t *) &nextiocb->iocb) + 7));
+	}
+
+	/*
+	 * Issue iocb command to adapter
+	 */
+	lpfc_sli_pcimem_bcopy(&nextiocb->iocb, iocb, phba->iocb_cmd_size);
+	wmb();
+	pring->stats.iocb_cmd++;
+
+	/*
+	 * If there is no completion routine to call, we can release the
+	 * IOCB buffer back right now. For IOCBs, like QUE_RING_BUF,
+	 * that have no rsp ring completion, cmd_cmpl MUST be NULL.
+	 */
+	if (nextiocb->cmd_cmpl)
+		lpfc_sli_ringtxcmpl_put(phba, pring, nextiocb);
+	else
+		__lpfc_sli_release_iocbq(phba, nextiocb);
+
+	/*
+	 * Let the HBA know what IOCB slot will be the next one the
+	 * driver will put a command into.
+	 */
+	pring->sli.sli3.cmdidx = pring->sli.sli3.next_cmdidx;
+	writel(pring->sli.sli3.cmdidx, &phba->host_gp[pring->ringno].cmdPutInx);
+}
+
+/**
+ * lpfc_sli_update_full_ring - Update the chip attention register
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ *
+ * The caller is not required to hold any lock for calling this function.
+ * This function updates the chip attention bits for the ring to inform firmware
+ * that there are pending work to be done for this ring and requests an
+ * interrupt when there is space available in the ring. This function is
+ * called when the driver is unable to post more iocbs to the ring due
+ * to unavailability of space in the ring.
+ **/
+static void
+lpfc_sli_update_full_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
+{
+	int ringno = pring->ringno;
+
+	pring->flag |= LPFC_CALL_RING_AVAILABLE;
+
+	wmb();
+
+	/*
+	 * Set ring 'ringno' to SET R0CE_REQ in Chip Att register.
+	 * The HBA will tell us when an IOCB entry is available.
+	 */
+	writel((CA_R0ATT|CA_R0CE_REQ) << (ringno*4), phba->CAregaddr);
+	readl(phba->CAregaddr); /* flush */
+
+	pring->stats.iocb_cmd_full++;
+}
+
+/**
+ * lpfc_sli_update_ring - Update chip attention register
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ *
+ * This function updates the chip attention register bit for the
+ * given ring to inform HBA that there is more work to be done
+ * in this ring. The caller is not required to hold any lock.
+ **/
+static void
+lpfc_sli_update_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
+{
+	int ringno = pring->ringno;
+
+	/*
+	 * Tell the HBA that there is work to do in this ring.
+	 */
+	if (!(phba->sli3_options & LPFC_SLI3_CRP_ENABLED)) {
+		wmb();
+		writel(CA_R0ATT << (ringno * 4), phba->CAregaddr);
+		readl(phba->CAregaddr); /* flush */
+	}
+}
+
+/**
+ * lpfc_sli_resume_iocb - Process iocbs in the txq
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ *
+ * This function is called with hbalock held to post pending iocbs
+ * in the txq to the firmware. This function is called when driver
+ * detects space available in the ring.
+ **/
+static void
+lpfc_sli_resume_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
+{
+	IOCB_t *iocb;
+	struct lpfc_iocbq *nextiocb;
+
+	lockdep_assert_held(&phba->hbalock);
+
+	/*
+	 * Check to see if:
+	 *  (a) there is anything on the txq to send
+	 *  (b) link is up
+	 *  (c) link attention events can be processed (fcp ring only)
+	 *  (d) IOCB processing is not blocked by the outstanding mbox command.
+	 */
+
+	if (lpfc_is_link_up(phba) &&
+	    (!list_empty(&pring->txq)) &&
+	    (pring->ringno != LPFC_FCP_RING ||
+	     phba->sli.sli_flag & LPFC_PROCESS_LA)) {
+
+		while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) &&
+		       (nextiocb = lpfc_sli_ringtx_get(phba, pring)))
+			lpfc_sli_submit_iocb(phba, pring, iocb, nextiocb);
+
+		if (iocb)
+			lpfc_sli_update_ring(phba, pring);
+		else
+			lpfc_sli_update_full_ring(phba, pring);
+	}
+
+	return;
+}
+
+/**
+ * lpfc_sli_next_hbq_slot - Get next hbq entry for the HBQ
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ *
+ * This function is called with hbalock held to get the next
+ * available slot for the given HBQ. If there is free slot
+ * available for the HBQ it will return pointer to the next available
+ * HBQ entry else it will return NULL.
+ **/
+static struct lpfc_hbq_entry *
+lpfc_sli_next_hbq_slot(struct lpfc_hba *phba, uint32_t hbqno)
+{
+	struct hbq_s *hbqp = &phba->hbqs[hbqno];
+
+	lockdep_assert_held(&phba->hbalock);
+
+	if (hbqp->next_hbqPutIdx == hbqp->hbqPutIdx &&
+	    ++hbqp->next_hbqPutIdx >= hbqp->entry_count)
+		hbqp->next_hbqPutIdx = 0;
+
+	if (unlikely(hbqp->local_hbqGetIdx == hbqp->next_hbqPutIdx)) {
+		uint32_t raw_index = phba->hbq_get[hbqno];
+		uint32_t getidx = le32_to_cpu(raw_index);
+
+		hbqp->local_hbqGetIdx = getidx;
+
+		if (unlikely(hbqp->local_hbqGetIdx >= hbqp->entry_count)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"1802 HBQ %d: local_hbqGetIdx "
+					"%u is > than hbqp->entry_count %u\n",
+					hbqno, hbqp->local_hbqGetIdx,
+					hbqp->entry_count);
+
+			phba->link_state = LPFC_HBA_ERROR;
+			return NULL;
+		}
+
+		if (hbqp->local_hbqGetIdx == hbqp->next_hbqPutIdx)
+			return NULL;
+	}
+
+	return (struct lpfc_hbq_entry *) phba->hbqs[hbqno].hbq_virt +
+			hbqp->hbqPutIdx;
+}
+
+/**
+ * lpfc_sli_hbqbuf_free_all - Free all the hbq buffers
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with no lock held to free all the
+ * hbq buffers while uninitializing the SLI interface. It also
+ * frees the HBQ buffers returned by the firmware but not yet
+ * processed by the upper layers.
+ **/
+void
+lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba)
+{
+	struct lpfc_dmabuf *dmabuf, *next_dmabuf;
+	struct hbq_dmabuf *hbq_buf;
+	unsigned long flags;
+	int i, hbq_count;
+
+	hbq_count = lpfc_sli_hbq_count();
+	/* Return all memory used by all HBQs */
+	spin_lock_irqsave(&phba->hbalock, flags);
+	for (i = 0; i < hbq_count; ++i) {
+		list_for_each_entry_safe(dmabuf, next_dmabuf,
+				&phba->hbqs[i].hbq_buffer_list, list) {
+			hbq_buf = container_of(dmabuf, struct hbq_dmabuf, dbuf);
+			list_del(&hbq_buf->dbuf.list);
+			(phba->hbqs[i].hbq_free_buffer)(phba, hbq_buf);
+		}
+		phba->hbqs[i].buffer_count = 0;
+	}
+
+	/* Mark the HBQs not in use */
+	phba->hbq_in_use = 0;
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+}
+
+/**
+ * lpfc_sli_hbq_to_firmware - Post the hbq buffer to firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post a
+ * hbq buffer to the firmware. If the function finds an empty
+ * slot in the HBQ, it will post the buffer. The function will return
+ * pointer to the hbq entry if it successfully post the buffer
+ * else it will return NULL.
+ **/
+static int
+lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno,
+			 struct hbq_dmabuf *hbq_buf)
+{
+	lockdep_assert_held(&phba->hbalock);
+	return phba->lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buf);
+}
+
+/**
+ * lpfc_sli_hbq_to_firmware_s3 - Post the hbq buffer to SLI3 firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post a hbq buffer to the
+ * firmware. If the function finds an empty slot in the HBQ, it will post the
+ * buffer and place it on the hbq_buffer_list. The function will return zero if
+ * it successfully post the buffer else it will return an error.
+ **/
+static int
+lpfc_sli_hbq_to_firmware_s3(struct lpfc_hba *phba, uint32_t hbqno,
+			    struct hbq_dmabuf *hbq_buf)
+{
+	struct lpfc_hbq_entry *hbqe;
+	dma_addr_t physaddr = hbq_buf->dbuf.phys;
+
+	lockdep_assert_held(&phba->hbalock);
+	/* Get next HBQ entry slot to use */
+	hbqe = lpfc_sli_next_hbq_slot(phba, hbqno);
+	if (hbqe) {
+		struct hbq_s *hbqp = &phba->hbqs[hbqno];
+
+		hbqe->bde.addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
+		hbqe->bde.addrLow  = le32_to_cpu(putPaddrLow(physaddr));
+		hbqe->bde.tus.f.bdeSize = hbq_buf->total_size;
+		hbqe->bde.tus.f.bdeFlags = 0;
+		hbqe->bde.tus.w = le32_to_cpu(hbqe->bde.tus.w);
+		hbqe->buffer_tag = le32_to_cpu(hbq_buf->tag);
+				/* Sync SLIM */
+		hbqp->hbqPutIdx = hbqp->next_hbqPutIdx;
+		writel(hbqp->hbqPutIdx, phba->hbq_put + hbqno);
+				/* flush */
+		readl(phba->hbq_put + hbqno);
+		list_add_tail(&hbq_buf->dbuf.list, &hbqp->hbq_buffer_list);
+		return 0;
+	} else
+		return -ENOMEM;
+}
+
+/**
+ * lpfc_sli_hbq_to_firmware_s4 - Post the hbq buffer to SLI4 firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post an RQE to the SLI4
+ * firmware. If able to post the RQE to the RQ it will queue the hbq entry to
+ * the hbq_buffer_list and return zero, otherwise it will return an error.
+ **/
+static int
+lpfc_sli_hbq_to_firmware_s4(struct lpfc_hba *phba, uint32_t hbqno,
+			    struct hbq_dmabuf *hbq_buf)
+{
+	int rc;
+	struct lpfc_rqe hrqe;
+	struct lpfc_rqe drqe;
+	struct lpfc_queue *hrq;
+	struct lpfc_queue *drq;
+
+	if (hbqno != LPFC_ELS_HBQ)
+		return 1;
+	hrq = phba->sli4_hba.hdr_rq;
+	drq = phba->sli4_hba.dat_rq;
+
+	lockdep_assert_held(&phba->hbalock);
+	hrqe.address_lo = putPaddrLow(hbq_buf->hbuf.phys);
+	hrqe.address_hi = putPaddrHigh(hbq_buf->hbuf.phys);
+	drqe.address_lo = putPaddrLow(hbq_buf->dbuf.phys);
+	drqe.address_hi = putPaddrHigh(hbq_buf->dbuf.phys);
+	rc = lpfc_sli4_rq_put(hrq, drq, &hrqe, &drqe);
+	if (rc < 0)
+		return rc;
+	hbq_buf->tag = (rc | (hbqno << 16));
+	list_add_tail(&hbq_buf->dbuf.list, &phba->hbqs[hbqno].hbq_buffer_list);
+	return 0;
+}
+
+/* HBQ for ELS and CT traffic. */
+static struct lpfc_hbq_init lpfc_els_hbq = {
+	.rn = 1,
+	.entry_count = 256,
+	.mask_count = 0,
+	.profile = 0,
+	.ring_mask = (1 << LPFC_ELS_RING),
+	.buffer_count = 0,
+	.init_count = 40,
+	.add_count = 40,
+};
+
+/* Array of HBQs */
+struct lpfc_hbq_init *lpfc_hbq_defs[] = {
+	&lpfc_els_hbq,
+};
+
+/**
+ * lpfc_sli_hbqbuf_fill_hbqs - Post more hbq buffers to HBQ
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @count: Number of HBQ buffers to be posted.
+ *
+ * This function is called with no lock held to post more hbq buffers to the
+ * given HBQ. The function returns the number of HBQ buffers successfully
+ * posted.
+ **/
+static int
+lpfc_sli_hbqbuf_fill_hbqs(struct lpfc_hba *phba, uint32_t hbqno, uint32_t count)
+{
+	uint32_t i, posted = 0;
+	unsigned long flags;
+	struct hbq_dmabuf *hbq_buffer;
+	LIST_HEAD(hbq_buf_list);
+	if (!phba->hbqs[hbqno].hbq_alloc_buffer)
+		return 0;
+
+	if ((phba->hbqs[hbqno].buffer_count + count) >
+	    lpfc_hbq_defs[hbqno]->entry_count)
+		count = lpfc_hbq_defs[hbqno]->entry_count -
+					phba->hbqs[hbqno].buffer_count;
+	if (!count)
+		return 0;
+	/* Allocate HBQ entries */
+	for (i = 0; i < count; i++) {
+		hbq_buffer = (phba->hbqs[hbqno].hbq_alloc_buffer)(phba);
+		if (!hbq_buffer)
+			break;
+		list_add_tail(&hbq_buffer->dbuf.list, &hbq_buf_list);
+	}
+	/* Check whether HBQ is still in use */
+	spin_lock_irqsave(&phba->hbalock, flags);
+	if (!phba->hbq_in_use)
+		goto err;
+	while (!list_empty(&hbq_buf_list)) {
+		list_remove_head(&hbq_buf_list, hbq_buffer, struct hbq_dmabuf,
+				 dbuf.list);
+		hbq_buffer->tag = (phba->hbqs[hbqno].buffer_count |
+				      (hbqno << 16));
+		if (!lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
+			phba->hbqs[hbqno].buffer_count++;
+			posted++;
+		} else
+			(phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer);
+	}
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+	return posted;
+err:
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+	while (!list_empty(&hbq_buf_list)) {
+		list_remove_head(&hbq_buf_list, hbq_buffer, struct hbq_dmabuf,
+				 dbuf.list);
+		(phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer);
+	}
+	return 0;
+}
+
+/**
+ * lpfc_sli_hbqbuf_add_hbqs - Post more HBQ buffers to firmware
+ * @phba: Pointer to HBA context object.
+ * @qno: HBQ number.
+ *
+ * This function posts more buffers to the HBQ. This function
+ * is called with no lock held. The function returns the number of HBQ entries
+ * successfully allocated.
+ **/
+int
+lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno)
+{
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		return 0;
+	else
+		return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+					 lpfc_hbq_defs[qno]->add_count);
+}
+
+/**
+ * lpfc_sli_hbqbuf_init_hbqs - Post initial buffers to the HBQ
+ * @phba: Pointer to HBA context object.
+ * @qno:  HBQ queue number.
+ *
+ * This function is called from SLI initialization code path with
+ * no lock held to post initial HBQ buffers to firmware. The
+ * function returns the number of HBQ entries successfully allocated.
+ **/
+static int
+lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno)
+{
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+					lpfc_hbq_defs[qno]->entry_count);
+	else
+		return lpfc_sli_hbqbuf_fill_hbqs(phba, qno,
+					 lpfc_hbq_defs[qno]->init_count);
+}
+
+/*
+ * lpfc_sli_hbqbuf_get - Remove the first hbq off of an hbq list
+ *
+ * This function removes the first hbq buffer on an hbq list and returns a
+ * pointer to that buffer. If it finds no buffers on the list it returns NULL.
+ **/
+static struct hbq_dmabuf *
+lpfc_sli_hbqbuf_get(struct list_head *rb_list)
+{
+	struct lpfc_dmabuf *d_buf;
+
+	list_remove_head(rb_list, d_buf, struct lpfc_dmabuf, list);
+	if (!d_buf)
+		return NULL;
+	return container_of(d_buf, struct hbq_dmabuf, dbuf);
+}
+
+/**
+ * lpfc_sli_rqbuf_get - Remove the first dma buffer off of an RQ list
+ * @phba: Pointer to HBA context object.
+ * @hrq: HBQ number.
+ *
+ * This function removes the first RQ buffer on an RQ buffer list and returns a
+ * pointer to that buffer. If it finds no buffers on the list it returns NULL.
+ **/
+static struct rqb_dmabuf *
+lpfc_sli_rqbuf_get(struct lpfc_hba *phba, struct lpfc_queue *hrq)
+{
+	struct lpfc_dmabuf *h_buf;
+	struct lpfc_rqb *rqbp;
+
+	rqbp = hrq->rqbp;
+	list_remove_head(&rqbp->rqb_buffer_list, h_buf,
+			 struct lpfc_dmabuf, list);
+	if (!h_buf)
+		return NULL;
+	rqbp->buffer_count--;
+	return container_of(h_buf, struct rqb_dmabuf, hbuf);
+}
+
+/**
+ * lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag
+ * @phba: Pointer to HBA context object.
+ * @tag: Tag of the hbq buffer.
+ *
+ * This function searches for the hbq buffer associated with the given tag in
+ * the hbq buffer list. If it finds the hbq buffer, it returns the hbq_buffer
+ * otherwise it returns NULL.
+ **/
+static struct hbq_dmabuf *
+lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag)
+{
+	struct lpfc_dmabuf *d_buf;
+	struct hbq_dmabuf *hbq_buf;
+	uint32_t hbqno;
+
+	hbqno = tag >> 16;
+	if (hbqno >= LPFC_MAX_HBQS)
+		return NULL;
+
+	spin_lock_irq(&phba->hbalock);
+	list_for_each_entry(d_buf, &phba->hbqs[hbqno].hbq_buffer_list, list) {
+		hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+		if (hbq_buf->tag == tag) {
+			spin_unlock_irq(&phba->hbalock);
+			return hbq_buf;
+		}
+	}
+	spin_unlock_irq(&phba->hbalock);
+	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"1803 Bad hbq tag. Data: x%x x%x\n",
+			tag, phba->hbqs[tag >> 16].buffer_count);
+	return NULL;
+}
+
+/**
+ * lpfc_sli_free_hbq - Give back the hbq buffer to firmware
+ * @phba: Pointer to HBA context object.
+ * @hbq_buffer: Pointer to HBQ buffer.
+ *
+ * This function is called with hbalock. This function gives back
+ * the hbq buffer to firmware. If the HBQ does not have space to
+ * post the buffer, it will free the buffer.
+ **/
+void
+lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer)
+{
+	uint32_t hbqno;
+
+	if (hbq_buffer) {
+		hbqno = hbq_buffer->tag >> 16;
+		if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer))
+			(phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer);
+	}
+}
+
+/**
+ * lpfc_sli_chk_mbx_command - Check if the mailbox is a legitimate mailbox
+ * @mbxCommand: mailbox command code.
+ *
+ * This function is called by the mailbox event handler function to verify
+ * that the completed mailbox command is a legitimate mailbox command. If the
+ * completed mailbox is not known to the function, it will return MBX_SHUTDOWN
+ * and the mailbox event handler will take the HBA offline.
+ **/
+static int
+lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
+{
+	uint8_t ret;
+
+	switch (mbxCommand) {
+	case MBX_LOAD_SM:
+	case MBX_READ_NV:
+	case MBX_WRITE_NV:
+	case MBX_WRITE_VPARMS:
+	case MBX_RUN_BIU_DIAG:
+	case MBX_INIT_LINK:
+	case MBX_DOWN_LINK:
+	case MBX_CONFIG_LINK:
+	case MBX_CONFIG_RING:
+	case MBX_RESET_RING:
+	case MBX_READ_CONFIG:
+	case MBX_READ_RCONFIG:
+	case MBX_READ_SPARM:
+	case MBX_READ_STATUS:
+	case MBX_READ_RPI:
+	case MBX_READ_XRI:
+	case MBX_READ_REV:
+	case MBX_READ_LNK_STAT:
+	case MBX_REG_LOGIN:
+	case MBX_UNREG_LOGIN:
+	case MBX_CLEAR_LA:
+	case MBX_DUMP_MEMORY:
+	case MBX_DUMP_CONTEXT:
+	case MBX_RUN_DIAGS:
+	case MBX_RESTART:
+	case MBX_UPDATE_CFG:
+	case MBX_DOWN_LOAD:
+	case MBX_DEL_LD_ENTRY:
+	case MBX_RUN_PROGRAM:
+	case MBX_SET_MASK:
+	case MBX_SET_VARIABLE:
+	case MBX_UNREG_D_ID:
+	case MBX_KILL_BOARD:
+	case MBX_CONFIG_FARP:
+	case MBX_BEACON:
+	case MBX_LOAD_AREA:
+	case MBX_RUN_BIU_DIAG64:
+	case MBX_CONFIG_PORT:
+	case MBX_READ_SPARM64:
+	case MBX_READ_RPI64:
+	case MBX_REG_LOGIN64:
+	case MBX_READ_TOPOLOGY:
+	case MBX_WRITE_WWN:
+	case MBX_SET_DEBUG:
+	case MBX_LOAD_EXP_ROM:
+	case MBX_ASYNCEVT_ENABLE:
+	case MBX_REG_VPI:
+	case MBX_UNREG_VPI:
+	case MBX_HEARTBEAT:
+	case MBX_PORT_CAPABILITIES:
+	case MBX_PORT_IOV_CONTROL:
+	case MBX_SLI4_CONFIG:
+	case MBX_SLI4_REQ_FTRS:
+	case MBX_REG_FCFI:
+	case MBX_UNREG_FCFI:
+	case MBX_REG_VFI:
+	case MBX_UNREG_VFI:
+	case MBX_INIT_VPI:
+	case MBX_INIT_VFI:
+	case MBX_RESUME_RPI:
+	case MBX_READ_EVENT_LOG_STATUS:
+	case MBX_READ_EVENT_LOG:
+	case MBX_SECURITY_MGMT:
+	case MBX_AUTH_PORT:
+	case MBX_ACCESS_VDATA:
+		ret = mbxCommand;
+		break;
+	default:
+		ret = MBX_SHUTDOWN;
+		break;
+	}
+	return ret;
+}
+
+/**
+ * lpfc_sli_wake_mbox_wait - lpfc_sli_issue_mbox_wait mbox completion handler
+ * @phba: Pointer to HBA context object.
+ * @pmboxq: Pointer to mailbox command.
+ *
+ * This is completion handler function for mailbox commands issued from
+ * lpfc_sli_issue_mbox_wait function. This function is called by the
+ * mailbox event handler function with no lock held. This function
+ * will wake up thread waiting on the wait queue pointed by context1
+ * of the mailbox.
+ **/
+void
+lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
+{
+	unsigned long drvr_flag;
+	struct completion *pmbox_done;
+
+	/*
+	 * If pmbox_done is empty, the driver thread gave up waiting and
+	 * continued running.
+	 */
+	pmboxq->mbox_flag |= LPFC_MBX_WAKE;
+	spin_lock_irqsave(&phba->hbalock, drvr_flag);
+	pmbox_done = (struct completion *)pmboxq->context3;
+	if (pmbox_done)
+		complete(pmbox_done);
+	spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+	return;
+}
+
+static void
+__lpfc_sli_rpi_release(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
+{
+	unsigned long iflags;
+
+	if (ndlp->nlp_flag & NLP_RELEASE_RPI) {
+		lpfc_sli4_free_rpi(vport->phba, ndlp->nlp_rpi);
+		spin_lock_irqsave(&ndlp->lock, iflags);
+		ndlp->nlp_flag &= ~NLP_RELEASE_RPI;
+		ndlp->nlp_rpi = LPFC_RPI_ALLOC_ERROR;
+		spin_unlock_irqrestore(&ndlp->lock, iflags);
+	}
+	ndlp->nlp_flag &= ~NLP_UNREG_INP;
+}
+
+void
+lpfc_sli_rpi_release(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
+{
+	__lpfc_sli_rpi_release(vport, ndlp);
+}
+
+/**
+ * lpfc_sli_def_mbox_cmpl - Default mailbox completion handler
+ * @phba: Pointer to HBA context object.
+ * @pmb: Pointer to mailbox object.
+ *
+ * This function is the default mailbox completion handler. It
+ * frees the memory resources associated with the completed mailbox
+ * command. If the completed command is a REG_LOGIN mailbox command,
+ * this function will issue a UREG_LOGIN to re-claim the RPI.
+ **/
+void
+lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
+{
+	struct lpfc_vport  *vport = pmb->vport;
+	struct lpfc_dmabuf *mp;
+	struct lpfc_nodelist *ndlp;
+	struct Scsi_Host *shost;
+	uint16_t rpi, vpi;
+	int rc;
+
+	/*
+	 * If a REG_LOGIN succeeded  after node is destroyed or node
+	 * is in re-discovery driver need to cleanup the RPI.
+	 */
+	if (!(phba->pport->load_flag & FC_UNLOADING) &&
+	    pmb->u.mb.mbxCommand == MBX_REG_LOGIN64 &&
+	    !pmb->u.mb.mbxStatus) {
+		mp = (struct lpfc_dmabuf *)pmb->ctx_buf;
+		if (mp) {
+			pmb->ctx_buf = NULL;
+			lpfc_mbuf_free(phba, mp->virt, mp->phys);
+			kfree(mp);
+		}
+		rpi = pmb->u.mb.un.varWords[0];
+		vpi = pmb->u.mb.un.varRegLogin.vpi;
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			vpi -= phba->sli4_hba.max_cfg_param.vpi_base;
+		lpfc_unreg_login(phba, vpi, rpi, pmb);
+		pmb->vport = vport;
+		pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+		if (rc != MBX_NOT_FINISHED)
+			return;
+	}
+
+	if ((pmb->u.mb.mbxCommand == MBX_REG_VPI) &&
+		!(phba->pport->load_flag & FC_UNLOADING) &&
+		!pmb->u.mb.mbxStatus) {
+		shost = lpfc_shost_from_vport(vport);
+		spin_lock_irq(shost->host_lock);
+		vport->vpi_state |= LPFC_VPI_REGISTERED;
+		vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
+		spin_unlock_irq(shost->host_lock);
+	}
+
+	if (pmb->u.mb.mbxCommand == MBX_REG_LOGIN64) {
+		ndlp = (struct lpfc_nodelist *)pmb->ctx_ndlp;
+		lpfc_nlp_put(ndlp);
+	}
+
+	if (pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) {
+		ndlp = (struct lpfc_nodelist *)pmb->ctx_ndlp;
+
+		/* Check to see if there are any deferred events to process */
+		if (ndlp) {
+			lpfc_printf_vlog(
+				vport,
+				KERN_INFO, LOG_MBOX | LOG_DISCOVERY,
+				"1438 UNREG cmpl deferred mbox x%x "
+				"on NPort x%x Data: x%x x%x x%px x%x x%x\n",
+				ndlp->nlp_rpi, ndlp->nlp_DID,
+				ndlp->nlp_flag, ndlp->nlp_defer_did,
+				ndlp, vport->load_flag, kref_read(&ndlp->kref));
+
+			if ((ndlp->nlp_flag & NLP_UNREG_INP) &&
+			    (ndlp->nlp_defer_did != NLP_EVT_NOTHING_PENDING)) {
+				ndlp->nlp_flag &= ~NLP_UNREG_INP;
+				ndlp->nlp_defer_did = NLP_EVT_NOTHING_PENDING;
+				lpfc_issue_els_plogi(vport, ndlp->nlp_DID, 0);
+			} else {
+				__lpfc_sli_rpi_release(vport, ndlp);
+			}
+
+			/* The unreg_login mailbox is complete and had a
+			 * reference that has to be released.  The PLOGI
+			 * got its own ref.
+			 */
+			lpfc_nlp_put(ndlp);
+			pmb->ctx_ndlp = NULL;
+		}
+	}
+
+	/* This nlp_put pairs with lpfc_sli4_resume_rpi */
+	if (pmb->u.mb.mbxCommand == MBX_RESUME_RPI) {
+		ndlp = (struct lpfc_nodelist *)pmb->ctx_ndlp;
+		lpfc_nlp_put(ndlp);
+	}
+
+	/* Check security permission status on INIT_LINK mailbox command */
+	if ((pmb->u.mb.mbxCommand == MBX_INIT_LINK) &&
+	    (pmb->u.mb.mbxStatus == MBXERR_SEC_NO_PERMISSION))
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2860 SLI authentication is required "
+				"for INIT_LINK but has not done yet\n");
+
+	if (bf_get(lpfc_mqe_command, &pmb->u.mqe) == MBX_SLI4_CONFIG)
+		lpfc_sli4_mbox_cmd_free(phba, pmb);
+	else
+		lpfc_mbox_rsrc_cleanup(phba, pmb, MBOX_THD_UNLOCKED);
+}
+ /**
+ * lpfc_sli4_unreg_rpi_cmpl_clr - mailbox completion handler
+ * @phba: Pointer to HBA context object.
+ * @pmb: Pointer to mailbox object.
+ *
+ * This function is the unreg rpi mailbox completion handler. It
+ * frees the memory resources associated with the completed mailbox
+ * command. An additional reference is put on the ndlp to prevent
+ * lpfc_nlp_release from freeing the rpi bit in the bitmask before
+ * the unreg mailbox command completes, this routine puts the
+ * reference back.
+ *
+ **/
+void
+lpfc_sli4_unreg_rpi_cmpl_clr(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
+{
+	struct lpfc_vport  *vport = pmb->vport;
+	struct lpfc_nodelist *ndlp;
+
+	ndlp = pmb->ctx_ndlp;
+	if (pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) {
+		if (phba->sli_rev == LPFC_SLI_REV4 &&
+		    (bf_get(lpfc_sli_intf_if_type,
+		     &phba->sli4_hba.sli_intf) >=
+		     LPFC_SLI_INTF_IF_TYPE_2)) {
+			if (ndlp) {
+				lpfc_printf_vlog(
+					 vport, KERN_INFO, LOG_MBOX | LOG_SLI,
+					 "0010 UNREG_LOGIN vpi:%x "
+					 "rpi:%x DID:%x defer x%x flg x%x "
+					 "x%px\n",
+					 vport->vpi, ndlp->nlp_rpi,
+					 ndlp->nlp_DID, ndlp->nlp_defer_did,
+					 ndlp->nlp_flag,
+					 ndlp);
+				ndlp->nlp_flag &= ~NLP_LOGO_ACC;
+
+				/* Check to see if there are any deferred
+				 * events to process
+				 */
+				if ((ndlp->nlp_flag & NLP_UNREG_INP) &&
+				    (ndlp->nlp_defer_did !=
+				    NLP_EVT_NOTHING_PENDING)) {
+					lpfc_printf_vlog(
+						vport, KERN_INFO, LOG_DISCOVERY,
+						"4111 UNREG cmpl deferred "
+						"clr x%x on "
+						"NPort x%x Data: x%x x%px\n",
+						ndlp->nlp_rpi, ndlp->nlp_DID,
+						ndlp->nlp_defer_did, ndlp);
+					ndlp->nlp_flag &= ~NLP_UNREG_INP;
+					ndlp->nlp_defer_did =
+						NLP_EVT_NOTHING_PENDING;
+					lpfc_issue_els_plogi(
+						vport, ndlp->nlp_DID, 0);
+				} else {
+					__lpfc_sli_rpi_release(vport, ndlp);
+				}
+				lpfc_nlp_put(ndlp);
+			}
+		}
+	}
+
+	mempool_free(pmb, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli_handle_mb_event - Handle mailbox completions from firmware
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with no lock held. This function processes all
+ * the completed mailbox commands and gives it to upper layers. The interrupt
+ * service routine processes mailbox completion interrupt and adds completed
+ * mailbox commands to the mboxq_cmpl queue and signals the worker thread.
+ * Worker thread call lpfc_sli_handle_mb_event, which will return the
+ * completed mailbox commands in mboxq_cmpl queue to the upper layers. This
+ * function returns the mailbox commands to the upper layer by calling the
+ * completion handler function of each mailbox.
+ **/
+int
+lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
+{
+	MAILBOX_t *pmbox;
+	LPFC_MBOXQ_t *pmb;
+	int rc;
+	LIST_HEAD(cmplq);
+
+	phba->sli.slistat.mbox_event++;
+
+	/* Get all completed mailboxe buffers into the cmplq */
+	spin_lock_irq(&phba->hbalock);
+	list_splice_init(&phba->sli.mboxq_cmpl, &cmplq);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Get a Mailbox buffer to setup mailbox commands for callback */
+	do {
+		list_remove_head(&cmplq, pmb, LPFC_MBOXQ_t, list);
+		if (pmb == NULL)
+			break;
+
+		pmbox = &pmb->u.mb;
+
+		if (pmbox->mbxCommand != MBX_HEARTBEAT) {
+			if (pmb->vport) {
+				lpfc_debugfs_disc_trc(pmb->vport,
+					LPFC_DISC_TRC_MBOX_VPORT,
+					"MBOX cmpl vport: cmd:x%x mb:x%x x%x",
+					(uint32_t)pmbox->mbxCommand,
+					pmbox->un.varWords[0],
+					pmbox->un.varWords[1]);
+			}
+			else {
+				lpfc_debugfs_disc_trc(phba->pport,
+					LPFC_DISC_TRC_MBOX,
+					"MBOX cmpl:       cmd:x%x mb:x%x x%x",
+					(uint32_t)pmbox->mbxCommand,
+					pmbox->un.varWords[0],
+					pmbox->un.varWords[1]);
+			}
+		}
+
+		/*
+		 * It is a fatal error if unknown mbox command completion.
+		 */
+		if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) ==
+		    MBX_SHUTDOWN) {
+			/* Unknown mailbox command compl */
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"(%d):0323 Unknown Mailbox command "
+					"x%x (x%x/x%x) Cmpl\n",
+					pmb->vport ? pmb->vport->vpi :
+					LPFC_VPORT_UNKNOWN,
+					pmbox->mbxCommand,
+					lpfc_sli_config_mbox_subsys_get(phba,
+									pmb),
+					lpfc_sli_config_mbox_opcode_get(phba,
+									pmb));
+			phba->link_state = LPFC_HBA_ERROR;
+			phba->work_hs = HS_FFER3;
+			lpfc_handle_eratt(phba);
+			continue;
+		}
+
+		if (pmbox->mbxStatus) {
+			phba->sli.slistat.mbox_stat_err++;
+			if (pmbox->mbxStatus == MBXERR_NO_RESOURCES) {
+				/* Mbox cmd cmpl error - RETRYing */
+				lpfc_printf_log(phba, KERN_INFO,
+					LOG_MBOX | LOG_SLI,
+					"(%d):0305 Mbox cmd cmpl "
+					"error - RETRYing Data: x%x "
+					"(x%x/x%x) x%x x%x x%x\n",
+					pmb->vport ? pmb->vport->vpi :
+					LPFC_VPORT_UNKNOWN,
+					pmbox->mbxCommand,
+					lpfc_sli_config_mbox_subsys_get(phba,
+									pmb),
+					lpfc_sli_config_mbox_opcode_get(phba,
+									pmb),
+					pmbox->mbxStatus,
+					pmbox->un.varWords[0],
+					pmb->vport ? pmb->vport->port_state :
+					LPFC_VPORT_UNKNOWN);
+				pmbox->mbxStatus = 0;
+				pmbox->mbxOwner = OWN_HOST;
+				rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+				if (rc != MBX_NOT_FINISHED)
+					continue;
+			}
+		}
+
+		/* Mailbox cmd <cmd> Cmpl <cmpl> */
+		lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+				"(%d):0307 Mailbox cmd x%x (x%x/x%x) Cmpl %ps "
+				"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+				"x%x x%x x%x\n",
+				pmb->vport ? pmb->vport->vpi : 0,
+				pmbox->mbxCommand,
+				lpfc_sli_config_mbox_subsys_get(phba, pmb),
+				lpfc_sli_config_mbox_opcode_get(phba, pmb),
+				pmb->mbox_cmpl,
+				*((uint32_t *) pmbox),
+				pmbox->un.varWords[0],
+				pmbox->un.varWords[1],
+				pmbox->un.varWords[2],
+				pmbox->un.varWords[3],
+				pmbox->un.varWords[4],
+				pmbox->un.varWords[5],
+				pmbox->un.varWords[6],
+				pmbox->un.varWords[7],
+				pmbox->un.varWords[8],
+				pmbox->un.varWords[9],
+				pmbox->un.varWords[10]);
+
+		if (pmb->mbox_cmpl)
+			pmb->mbox_cmpl(phba,pmb);
+	} while (1);
+	return 0;
+}
+
+/**
+ * lpfc_sli_get_buff - Get the buffer associated with the buffer tag
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @tag: buffer tag.
+ *
+ * This function is called with no lock held. When QUE_BUFTAG_BIT bit
+ * is set in the tag the buffer is posted for a particular exchange,
+ * the function will return the buffer without replacing the buffer.
+ * If the buffer is for unsolicited ELS or CT traffic, this function
+ * returns the buffer and also posts another buffer to the firmware.
+ **/
+static struct lpfc_dmabuf *
+lpfc_sli_get_buff(struct lpfc_hba *phba,
+		  struct lpfc_sli_ring *pring,
+		  uint32_t tag)
+{
+	struct hbq_dmabuf *hbq_entry;
+
+	if (tag & QUE_BUFTAG_BIT)
+		return lpfc_sli_ring_taggedbuf_get(phba, pring, tag);
+	hbq_entry = lpfc_sli_hbqbuf_find(phba, tag);
+	if (!hbq_entry)
+		return NULL;
+	return &hbq_entry->dbuf;
+}
+
+/**
+ * lpfc_nvme_unsol_ls_handler - Process an unsolicited event data buffer
+ *                              containing a NVME LS request.
+ * @phba: pointer to lpfc hba data structure.
+ * @piocb: pointer to the iocbq struct representing the sequence starting
+ *        frame.
+ *
+ * This routine initially validates the NVME LS, validates there is a login
+ * with the port that sent the LS, and then calls the appropriate nvme host
+ * or target LS request handler.
+ **/
+static void
+lpfc_nvme_unsol_ls_handler(struct lpfc_hba *phba, struct lpfc_iocbq *piocb)
+{
+	struct lpfc_nodelist *ndlp;
+	struct lpfc_dmabuf *d_buf;
+	struct hbq_dmabuf *nvmebuf;
+	struct fc_frame_header *fc_hdr;
+	struct lpfc_async_xchg_ctx *axchg = NULL;
+	char *failwhy = NULL;
+	uint32_t oxid, sid, did, fctl, size;
+	int ret = 1;
+
+	d_buf = piocb->cmd_dmabuf;
+
+	nvmebuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+	fc_hdr = nvmebuf->hbuf.virt;
+	oxid = be16_to_cpu(fc_hdr->fh_ox_id);
+	sid = sli4_sid_from_fc_hdr(fc_hdr);
+	did = sli4_did_from_fc_hdr(fc_hdr);
+	fctl = (fc_hdr->fh_f_ctl[0] << 16 |
+		fc_hdr->fh_f_ctl[1] << 8 |
+		fc_hdr->fh_f_ctl[2]);
+	size = bf_get(lpfc_rcqe_length, &nvmebuf->cq_event.cqe.rcqe_cmpl);
+
+	lpfc_nvmeio_data(phba, "NVME LS    RCV: xri x%x sz %d from %06x\n",
+			 oxid, size, sid);
+
+	if (phba->pport->load_flag & FC_UNLOADING) {
+		failwhy = "Driver Unloading";
+	} else if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)) {
+		failwhy = "NVME FC4 Disabled";
+	} else if (!phba->nvmet_support && !phba->pport->localport) {
+		failwhy = "No Localport";
+	} else if (phba->nvmet_support && !phba->targetport) {
+		failwhy = "No Targetport";
+	} else if (unlikely(fc_hdr->fh_r_ctl != FC_RCTL_ELS4_REQ)) {
+		failwhy = "Bad NVME LS R_CTL";
+	} else if (unlikely((fctl & 0x00FF0000) !=
+			(FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT))) {
+		failwhy = "Bad NVME LS F_CTL";
+	} else {
+		axchg = kzalloc(sizeof(*axchg), GFP_ATOMIC);
+		if (!axchg)
+			failwhy = "No CTX memory";
+	}
+
+	if (unlikely(failwhy)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"6154 Drop NVME LS: SID %06X OXID x%X: %s\n",
+				sid, oxid, failwhy);
+		goto out_fail;
+	}
+
+	/* validate the source of the LS is logged in */
+	ndlp = lpfc_findnode_did(phba->pport, sid);
+	if (!ndlp ||
+	    ((ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) &&
+	     (ndlp->nlp_state != NLP_STE_MAPPED_NODE))) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_NVME_DISC,
+				"6216 NVME Unsol rcv: No ndlp: "
+				"NPort_ID x%x oxid x%x\n",
+				sid, oxid);
+		goto out_fail;
+	}
+
+	axchg->phba = phba;
+	axchg->ndlp = ndlp;
+	axchg->size = size;
+	axchg->oxid = oxid;
+	axchg->sid = sid;
+	axchg->wqeq = NULL;
+	axchg->state = LPFC_NVME_STE_LS_RCV;
+	axchg->entry_cnt = 1;
+	axchg->rqb_buffer = (void *)nvmebuf;
+	axchg->hdwq = &phba->sli4_hba.hdwq[0];
+	axchg->payload = nvmebuf->dbuf.virt;
+	INIT_LIST_HEAD(&axchg->list);
+
+	if (phba->nvmet_support) {
+		ret = lpfc_nvmet_handle_lsreq(phba, axchg);
+		spin_lock_irq(&ndlp->lock);
+		if (!ret && !(ndlp->fc4_xpt_flags & NLP_XPT_HAS_HH)) {
+			ndlp->fc4_xpt_flags |= NLP_XPT_HAS_HH;
+			spin_unlock_irq(&ndlp->lock);
+
+			/* This reference is a single occurrence to hold the
+			 * node valid until the nvmet transport calls
+			 * host_release.
+			 */
+			if (!lpfc_nlp_get(ndlp))
+				goto out_fail;
+
+			lpfc_printf_log(phba, KERN_ERR, LOG_NODE,
+					"6206 NVMET unsol ls_req ndlp x%px "
+					"DID x%x xflags x%x refcnt %d\n",
+					ndlp, ndlp->nlp_DID,
+					ndlp->fc4_xpt_flags,
+					kref_read(&ndlp->kref));
+		} else {
+			spin_unlock_irq(&ndlp->lock);
+		}
+	} else {
+		ret = lpfc_nvme_handle_lsreq(phba, axchg);
+	}
+
+	/* if zero, LS was successfully handled. If non-zero, LS not handled */
+	if (!ret)
+		return;
+
+out_fail:
+	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"6155 Drop NVME LS from DID %06X: SID %06X OXID x%X "
+			"NVMe%s handler failed %d\n",
+			did, sid, oxid,
+			(phba->nvmet_support) ? "T" : "I", ret);
+
+	/* recycle receive buffer */
+	lpfc_in_buf_free(phba, &nvmebuf->dbuf);
+
+	/* If start of new exchange, abort it */
+	if (axchg && (fctl & FC_FC_FIRST_SEQ && !(fctl & FC_FC_EX_CTX)))
+		ret = lpfc_nvme_unsol_ls_issue_abort(phba, axchg, sid, oxid);
+
+	if (ret)
+		kfree(axchg);
+}
+
+/**
+ * lpfc_complete_unsol_iocb - Complete an unsolicited sequence
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @saveq: Pointer to the iocbq struct representing the sequence starting frame.
+ * @fch_r_ctl: the r_ctl for the first frame of the sequence.
+ * @fch_type: the type for the first frame of the sequence.
+ *
+ * This function is called with no lock held. This function uses the r_ctl and
+ * type of the received sequence to find the correct callback function to call
+ * to process the sequence.
+ **/
+static int
+lpfc_complete_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			 struct lpfc_iocbq *saveq, uint32_t fch_r_ctl,
+			 uint32_t fch_type)
+{
+	int i;
+
+	switch (fch_type) {
+	case FC_TYPE_NVME:
+		lpfc_nvme_unsol_ls_handler(phba, saveq);
+		return 1;
+	default:
+		break;
+	}
+
+	/* unSolicited Responses */
+	if (pring->prt[0].profile) {
+		if (pring->prt[0].lpfc_sli_rcv_unsol_event)
+			(pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
+									saveq);
+		return 1;
+	}
+	/* We must search, based on rctl / type
+	   for the right routine */
+	for (i = 0; i < pring->num_mask; i++) {
+		if ((pring->prt[i].rctl == fch_r_ctl) &&
+		    (pring->prt[i].type == fch_type)) {
+			if (pring->prt[i].lpfc_sli_rcv_unsol_event)
+				(pring->prt[i].lpfc_sli_rcv_unsol_event)
+						(phba, pring, saveq);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static void
+lpfc_sli_prep_unsol_wqe(struct lpfc_hba *phba,
+			struct lpfc_iocbq *saveq)
+{
+	IOCB_t *irsp;
+	union lpfc_wqe128 *wqe;
+	u16 i = 0;
+
+	irsp = &saveq->iocb;
+	wqe = &saveq->wqe;
+
+	/* Fill wcqe with the IOCB status fields */
+	bf_set(lpfc_wcqe_c_status, &saveq->wcqe_cmpl, irsp->ulpStatus);
+	saveq->wcqe_cmpl.word3 = irsp->ulpBdeCount;
+	saveq->wcqe_cmpl.parameter = irsp->un.ulpWord[4];
+	saveq->wcqe_cmpl.total_data_placed = irsp->unsli3.rcvsli3.acc_len;
+
+	/* Source ID */
+	bf_set(els_rsp64_sid, &wqe->xmit_els_rsp, irsp->un.rcvels.parmRo);
+
+	/* rx-id of the response frame */
+	bf_set(wqe_ctxt_tag, &wqe->xmit_els_rsp.wqe_com, irsp->ulpContext);
+
+	/* ox-id of the frame */
+	bf_set(wqe_rcvoxid, &wqe->xmit_els_rsp.wqe_com,
+	       irsp->unsli3.rcvsli3.ox_id);
+
+	/* DID */
+	bf_set(wqe_els_did, &wqe->xmit_els_rsp.wqe_dest,
+	       irsp->un.rcvels.remoteID);
+
+	/* unsol data len */
+	for (i = 0; i < irsp->ulpBdeCount; i++) {
+		struct lpfc_hbq_entry *hbqe = NULL;
+
+		if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) {
+			if (i == 0) {
+				hbqe = (struct lpfc_hbq_entry *)
+					&irsp->un.ulpWord[0];
+				saveq->wqe.gen_req.bde.tus.f.bdeSize =
+					hbqe->bde.tus.f.bdeSize;
+			} else if (i == 1) {
+				hbqe = (struct lpfc_hbq_entry *)
+					&irsp->unsli3.sli3Words[4];
+				saveq->unsol_rcv_len = hbqe->bde.tus.f.bdeSize;
+			}
+		}
+	}
+}
+
+/**
+ * lpfc_sli_process_unsol_iocb - Unsolicited iocb handler
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @saveq: Pointer to the unsolicited iocb.
+ *
+ * This function is called with no lock held by the ring event handler
+ * when there is an unsolicited iocb posted to the response ring by the
+ * firmware. This function gets the buffer associated with the iocbs
+ * and calls the event handler for the ring. This function handles both
+ * qring buffers and hbq buffers.
+ * When the function returns 1 the caller can free the iocb object otherwise
+ * upper layer functions will free the iocb objects.
+ **/
+static int
+lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			    struct lpfc_iocbq *saveq)
+{
+	IOCB_t           * irsp;
+	WORD5            * w5p;
+	dma_addr_t	 paddr;
+	uint32_t           Rctl, Type;
+	struct lpfc_iocbq *iocbq;
+	struct lpfc_dmabuf *dmzbuf;
+
+	irsp = &saveq->iocb;
+	saveq->vport = phba->pport;
+
+	if (irsp->ulpCommand == CMD_ASYNC_STATUS) {
+		if (pring->lpfc_sli_rcv_async_status)
+			pring->lpfc_sli_rcv_async_status(phba, pring, saveq);
+		else
+			lpfc_printf_log(phba,
+					KERN_WARNING,
+					LOG_SLI,
+					"0316 Ring %d handler: unexpected "
+					"ASYNC_STATUS iocb received evt_code "
+					"0x%x\n",
+					pring->ringno,
+					irsp->un.asyncstat.evt_code);
+		return 1;
+	}
+
+	if ((irsp->ulpCommand == CMD_IOCB_RET_XRI64_CX) &&
+	    (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED)) {
+		if (irsp->ulpBdeCount > 0) {
+			dmzbuf = lpfc_sli_get_buff(phba, pring,
+						   irsp->un.ulpWord[3]);
+			lpfc_in_buf_free(phba, dmzbuf);
+		}
+
+		if (irsp->ulpBdeCount > 1) {
+			dmzbuf = lpfc_sli_get_buff(phba, pring,
+						   irsp->unsli3.sli3Words[3]);
+			lpfc_in_buf_free(phba, dmzbuf);
+		}
+
+		if (irsp->ulpBdeCount > 2) {
+			dmzbuf = lpfc_sli_get_buff(phba, pring,
+						   irsp->unsli3.sli3Words[7]);
+			lpfc_in_buf_free(phba, dmzbuf);
+		}
+
+		return 1;
+	}
+
+	if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) {
+		if (irsp->ulpBdeCount != 0) {
+			saveq->cmd_dmabuf = lpfc_sli_get_buff(phba, pring,
+						irsp->un.ulpWord[3]);
+			if (!saveq->cmd_dmabuf)
+				lpfc_printf_log(phba,
+					KERN_ERR,
+					LOG_SLI,
+					"0341 Ring %d Cannot find buffer for "
+					"an unsolicited iocb. tag 0x%x\n",
+					pring->ringno,
+					irsp->un.ulpWord[3]);
+		}
+		if (irsp->ulpBdeCount == 2) {
+			saveq->bpl_dmabuf = lpfc_sli_get_buff(phba, pring,
+						irsp->unsli3.sli3Words[7]);
+			if (!saveq->bpl_dmabuf)
+				lpfc_printf_log(phba,
+					KERN_ERR,
+					LOG_SLI,
+					"0342 Ring %d Cannot find buffer for an"
+					" unsolicited iocb. tag 0x%x\n",
+					pring->ringno,
+					irsp->unsli3.sli3Words[7]);
+		}
+		list_for_each_entry(iocbq, &saveq->list, list) {
+			irsp = &iocbq->iocb;
+			if (irsp->ulpBdeCount != 0) {
+				iocbq->cmd_dmabuf = lpfc_sli_get_buff(phba,
+							pring,
+							irsp->un.ulpWord[3]);
+				if (!iocbq->cmd_dmabuf)
+					lpfc_printf_log(phba,
+						KERN_ERR,
+						LOG_SLI,
+						"0343 Ring %d Cannot find "
+						"buffer for an unsolicited iocb"
+						". tag 0x%x\n", pring->ringno,
+						irsp->un.ulpWord[3]);
+			}
+			if (irsp->ulpBdeCount == 2) {
+				iocbq->bpl_dmabuf = lpfc_sli_get_buff(phba,
+						pring,
+						irsp->unsli3.sli3Words[7]);
+				if (!iocbq->bpl_dmabuf)
+					lpfc_printf_log(phba,
+						KERN_ERR,
+						LOG_SLI,
+						"0344 Ring %d Cannot find "
+						"buffer for an unsolicited "
+						"iocb. tag 0x%x\n",
+						pring->ringno,
+						irsp->unsli3.sli3Words[7]);
+			}
+		}
+	} else {
+		paddr = getPaddr(irsp->un.cont64[0].addrHigh,
+				 irsp->un.cont64[0].addrLow);
+		saveq->cmd_dmabuf = lpfc_sli_ringpostbuf_get(phba, pring,
+							     paddr);
+		if (irsp->ulpBdeCount == 2) {
+			paddr = getPaddr(irsp->un.cont64[1].addrHigh,
+					 irsp->un.cont64[1].addrLow);
+			saveq->bpl_dmabuf = lpfc_sli_ringpostbuf_get(phba,
+								   pring,
+								   paddr);
+		}
+	}
+
+	if (irsp->ulpBdeCount != 0 &&
+	    (irsp->ulpCommand == CMD_IOCB_RCV_CONT64_CX ||
+	     irsp->ulpStatus == IOSTAT_INTERMED_RSP)) {
+		int found = 0;
+
+		/* search continue save q for same XRI */
+		list_for_each_entry(iocbq, &pring->iocb_continue_saveq, clist) {
+			if (iocbq->iocb.unsli3.rcvsli3.ox_id ==
+				saveq->iocb.unsli3.rcvsli3.ox_id) {
+				list_add_tail(&saveq->list, &iocbq->list);
+				found = 1;
+				break;
+			}
+		}
+		if (!found)
+			list_add_tail(&saveq->clist,
+				      &pring->iocb_continue_saveq);
+
+		if (saveq->iocb.ulpStatus != IOSTAT_INTERMED_RSP) {
+			list_del_init(&iocbq->clist);
+			saveq = iocbq;
+			irsp = &saveq->iocb;
+		} else {
+			return 0;
+		}
+	}
+	if ((irsp->ulpCommand == CMD_RCV_ELS_REQ64_CX) ||
+	    (irsp->ulpCommand == CMD_RCV_ELS_REQ_CX) ||
+	    (irsp->ulpCommand == CMD_IOCB_RCV_ELS64_CX)) {
+		Rctl = FC_RCTL_ELS_REQ;
+		Type = FC_TYPE_ELS;
+	} else {
+		w5p = (WORD5 *)&(saveq->iocb.un.ulpWord[5]);
+		Rctl = w5p->hcsw.Rctl;
+		Type = w5p->hcsw.Type;
+
+		/* Firmware Workaround */
+		if ((Rctl == 0) && (pring->ringno == LPFC_ELS_RING) &&
+			(irsp->ulpCommand == CMD_RCV_SEQUENCE64_CX ||
+			 irsp->ulpCommand == CMD_IOCB_RCV_SEQ64_CX)) {
+			Rctl = FC_RCTL_ELS_REQ;
+			Type = FC_TYPE_ELS;
+			w5p->hcsw.Rctl = Rctl;
+			w5p->hcsw.Type = Type;
+		}
+	}
+
+	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
+	    (irsp->ulpCommand == CMD_IOCB_RCV_ELS64_CX ||
+	    irsp->ulpCommand == CMD_IOCB_RCV_SEQ64_CX)) {
+		if (irsp->unsli3.rcvsli3.vpi == 0xffff)
+			saveq->vport = phba->pport;
+		else
+			saveq->vport = lpfc_find_vport_by_vpid(phba,
+					       irsp->unsli3.rcvsli3.vpi);
+	}
+
+	/* Prepare WQE with Unsol frame */
+	lpfc_sli_prep_unsol_wqe(phba, saveq);
+
+	if (!lpfc_complete_unsol_iocb(phba, pring, saveq, Rctl, Type))
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0313 Ring %d handler: unexpected Rctl x%x "
+				"Type x%x received\n",
+				pring->ringno, Rctl, Type);
+
+	return 1;
+}
+
+/**
+ * lpfc_sli_iocbq_lookup - Find command iocb for the given response iocb
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @prspiocb: Pointer to response iocb object.
+ *
+ * This function looks up the iocb_lookup table to get the command iocb
+ * corresponding to the given response iocb using the iotag of the
+ * response iocb. The driver calls this function with the hbalock held
+ * for SLI3 ports or the ring lock held for SLI4 ports.
+ * This function returns the command iocb object if it finds the command
+ * iocb else returns NULL.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_iocbq_lookup(struct lpfc_hba *phba,
+		      struct lpfc_sli_ring *pring,
+		      struct lpfc_iocbq *prspiocb)
+{
+	struct lpfc_iocbq *cmd_iocb = NULL;
+	u16 iotag;
+
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		iotag = get_wqe_reqtag(prspiocb);
+	else
+		iotag = prspiocb->iocb.ulpIoTag;
+
+	if (iotag != 0 && iotag <= phba->sli.last_iotag) {
+		cmd_iocb = phba->sli.iocbq_lookup[iotag];
+		if (cmd_iocb->cmd_flag & LPFC_IO_ON_TXCMPLQ) {
+			/* remove from txcmpl queue list */
+			list_del_init(&cmd_iocb->list);
+			cmd_iocb->cmd_flag &= ~LPFC_IO_ON_TXCMPLQ;
+			pring->txcmplq_cnt--;
+			return cmd_iocb;
+		}
+	}
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"0317 iotag x%x is out of "
+			"range: max iotag x%x\n",
+			iotag, phba->sli.last_iotag);
+	return NULL;
+}
+
+/**
+ * lpfc_sli_iocbq_lookup_by_tag - Find command iocb for the iotag
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @iotag: IOCB tag.
+ *
+ * This function looks up the iocb_lookup table to get the command iocb
+ * corresponding to the given iotag. The driver calls this function with
+ * the ring lock held because this function is an SLI4 port only helper.
+ * This function returns the command iocb object if it finds the command
+ * iocb else returns NULL.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_iocbq_lookup_by_tag(struct lpfc_hba *phba,
+			     struct lpfc_sli_ring *pring, uint16_t iotag)
+{
+	struct lpfc_iocbq *cmd_iocb = NULL;
+
+	if (iotag != 0 && iotag <= phba->sli.last_iotag) {
+		cmd_iocb = phba->sli.iocbq_lookup[iotag];
+		if (cmd_iocb->cmd_flag & LPFC_IO_ON_TXCMPLQ) {
+			/* remove from txcmpl queue list */
+			list_del_init(&cmd_iocb->list);
+			cmd_iocb->cmd_flag &= ~LPFC_IO_ON_TXCMPLQ;
+			pring->txcmplq_cnt--;
+			return cmd_iocb;
+		}
+	}
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"0372 iotag x%x lookup error: max iotag (x%x) "
+			"cmd_flag x%x\n",
+			iotag, phba->sli.last_iotag,
+			cmd_iocb ? cmd_iocb->cmd_flag : 0xffff);
+	return NULL;
+}
+
+/**
+ * lpfc_sli_process_sol_iocb - process solicited iocb completion
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @saveq: Pointer to the response iocb to be processed.
+ *
+ * This function is called by the ring event handler for non-fcp
+ * rings when there is a new response iocb in the response ring.
+ * The caller is not required to hold any locks. This function
+ * gets the command iocb associated with the response iocb and
+ * calls the completion handler for the command iocb. If there
+ * is no completion handler, the function will free the resources
+ * associated with command iocb. If the response iocb is for
+ * an already aborted command iocb, the status of the completion
+ * is changed to IOSTAT_LOCAL_REJECT/IOERR_SLI_ABORTED.
+ * This function always returns 1.
+ **/
+static int
+lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			  struct lpfc_iocbq *saveq)
+{
+	struct lpfc_iocbq *cmdiocbp;
+	unsigned long iflag;
+	u32 ulp_command, ulp_status, ulp_word4, ulp_context, iotag;
+
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		spin_lock_irqsave(&pring->ring_lock, iflag);
+	else
+		spin_lock_irqsave(&phba->hbalock, iflag);
+	cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring, saveq);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		spin_unlock_irqrestore(&pring->ring_lock, iflag);
+	else
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+	ulp_command = get_job_cmnd(phba, saveq);
+	ulp_status = get_job_ulpstatus(phba, saveq);
+	ulp_word4 = get_job_word4(phba, saveq);
+	ulp_context = get_job_ulpcontext(phba, saveq);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		iotag = get_wqe_reqtag(saveq);
+	else
+		iotag = saveq->iocb.ulpIoTag;
+
+	if (cmdiocbp) {
+		ulp_command = get_job_cmnd(phba, cmdiocbp);
+		if (cmdiocbp->cmd_cmpl) {
+			/*
+			 * If an ELS command failed send an event to mgmt
+			 * application.
+			 */
+			if (ulp_status &&
+			     (pring->ringno == LPFC_ELS_RING) &&
+			     (ulp_command == CMD_ELS_REQUEST64_CR))
+				lpfc_send_els_failure_event(phba,
+					cmdiocbp, saveq);
+
+			/*
+			 * Post all ELS completions to the worker thread.
+			 * All other are passed to the completion callback.
+			 */
+			if (pring->ringno == LPFC_ELS_RING) {
+				if ((phba->sli_rev < LPFC_SLI_REV4) &&
+				    (cmdiocbp->cmd_flag &
+							LPFC_DRIVER_ABORTED)) {
+					spin_lock_irqsave(&phba->hbalock,
+							  iflag);
+					cmdiocbp->cmd_flag &=
+						~LPFC_DRIVER_ABORTED;
+					spin_unlock_irqrestore(&phba->hbalock,
+							       iflag);
+					saveq->iocb.ulpStatus =
+						IOSTAT_LOCAL_REJECT;
+					saveq->iocb.un.ulpWord[4] =
+						IOERR_SLI_ABORTED;
+
+					/* Firmware could still be in progress
+					 * of DMAing payload, so don't free data
+					 * buffer till after a hbeat.
+					 */
+					spin_lock_irqsave(&phba->hbalock,
+							  iflag);
+					saveq->cmd_flag |= LPFC_DELAY_MEM_FREE;
+					spin_unlock_irqrestore(&phba->hbalock,
+							       iflag);
+				}
+				if (phba->sli_rev == LPFC_SLI_REV4) {
+					if (saveq->cmd_flag &
+					    LPFC_EXCHANGE_BUSY) {
+						/* Set cmdiocb flag for the
+						 * exchange busy so sgl (xri)
+						 * will not be released until
+						 * the abort xri is received
+						 * from hba.
+						 */
+						spin_lock_irqsave(
+							&phba->hbalock, iflag);
+						cmdiocbp->cmd_flag |=
+							LPFC_EXCHANGE_BUSY;
+						spin_unlock_irqrestore(
+							&phba->hbalock, iflag);
+					}
+					if (cmdiocbp->cmd_flag &
+					    LPFC_DRIVER_ABORTED) {
+						/*
+						 * Clear LPFC_DRIVER_ABORTED
+						 * bit in case it was driver
+						 * initiated abort.
+						 */
+						spin_lock_irqsave(
+							&phba->hbalock, iflag);
+						cmdiocbp->cmd_flag &=
+							~LPFC_DRIVER_ABORTED;
+						spin_unlock_irqrestore(
+							&phba->hbalock, iflag);
+						set_job_ulpstatus(cmdiocbp,
+								  IOSTAT_LOCAL_REJECT);
+						set_job_ulpword4(cmdiocbp,
+								 IOERR_ABORT_REQUESTED);
+						/*
+						 * For SLI4, irspiocb contains
+						 * NO_XRI in sli_xritag, it
+						 * shall not affect releasing
+						 * sgl (xri) process.
+						 */
+						set_job_ulpstatus(saveq,
+								  IOSTAT_LOCAL_REJECT);
+						set_job_ulpword4(saveq,
+								 IOERR_SLI_ABORTED);
+						spin_lock_irqsave(
+							&phba->hbalock, iflag);
+						saveq->cmd_flag |=
+							LPFC_DELAY_MEM_FREE;
+						spin_unlock_irqrestore(
+							&phba->hbalock, iflag);
+					}
+				}
+			}
+			cmdiocbp->cmd_cmpl(phba, cmdiocbp, saveq);
+		} else
+			lpfc_sli_release_iocbq(phba, cmdiocbp);
+	} else {
+		/*
+		 * Unknown initiating command based on the response iotag.
+		 * This could be the case on the ELS ring because of
+		 * lpfc_els_abort().
+		 */
+		if (pring->ringno != LPFC_ELS_RING) {
+			/*
+			 * Ring <ringno> handler: unexpected completion IoTag
+			 * <IoTag>
+			 */
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					 "0322 Ring %d handler: "
+					 "unexpected completion IoTag x%x "
+					 "Data: x%x x%x x%x x%x\n",
+					 pring->ringno, iotag, ulp_status,
+					 ulp_word4, ulp_command, ulp_context);
+		}
+	}
+
+	return 1;
+}
+
+/**
+ * lpfc_sli_rsp_pointers_error - Response ring pointer error handler
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ *
+ * This function is called from the iocb ring event handlers when
+ * put pointer is ahead of the get pointer for a ring. This function signal
+ * an error attention condition to the worker thread and the worker
+ * thread will transition the HBA to offline state.
+ **/
+static void
+lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
+{
+	struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
+	/*
+	 * Ring <ringno> handler: portRspPut <portRspPut> is bigger than
+	 * rsp ring <portRspMax>
+	 */
+	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"0312 Ring %d handler: portRspPut %d "
+			"is bigger than rsp ring %d\n",
+			pring->ringno, le32_to_cpu(pgp->rspPutInx),
+			pring->sli.sli3.numRiocb);
+
+	phba->link_state = LPFC_HBA_ERROR;
+
+	/*
+	 * All error attention handlers are posted to
+	 * worker thread
+	 */
+	phba->work_ha |= HA_ERATT;
+	phba->work_hs = HS_FFER3;
+
+	lpfc_worker_wake_up(phba);
+
+	return;
+}
+
+/**
+ * lpfc_poll_eratt - Error attention polling timer timeout handler
+ * @t: Context to fetch pointer to address of HBA context object from.
+ *
+ * This function is invoked by the Error Attention polling timer when the
+ * timer times out. It will check the SLI Error Attention register for
+ * possible attention events. If so, it will post an Error Attention event
+ * and wake up worker thread to process it. Otherwise, it will set up the
+ * Error Attention polling timer for the next poll.
+ **/
+void lpfc_poll_eratt(struct timer_list *t)
+{
+	struct lpfc_hba *phba;
+	uint32_t eratt = 0;
+	uint64_t sli_intr, cnt;
+
+	phba = from_timer(phba, t, eratt_poll);
+	if (!(phba->hba_flag & HBA_SETUP))
+		return;
+
+	/* Here we will also keep track of interrupts per sec of the hba */
+	sli_intr = phba->sli.slistat.sli_intr;
+
+	if (phba->sli.slistat.sli_prev_intr > sli_intr)
+		cnt = (((uint64_t)(-1) - phba->sli.slistat.sli_prev_intr) +
+			sli_intr);
+	else
+		cnt = (sli_intr - phba->sli.slistat.sli_prev_intr);
+
+	/* 64-bit integer division not supported on 32-bit x86 - use do_div */
+	do_div(cnt, phba->eratt_poll_interval);
+	phba->sli.slistat.sli_ips = cnt;
+
+	phba->sli.slistat.sli_prev_intr = sli_intr;
+
+	/* Check chip HA register for error event */
+	eratt = lpfc_sli_check_eratt(phba);
+
+	if (eratt)
+		/* Tell the worker thread there is work to do */
+		lpfc_worker_wake_up(phba);
+	else
+		/* Restart the timer for next eratt poll */
+		mod_timer(&phba->eratt_poll,
+			  jiffies +
+			  msecs_to_jiffies(1000 * phba->eratt_poll_interval));
+	return;
+}
+
+
+/**
+ * lpfc_sli_handle_fast_ring_event - Handle ring events on FCP ring
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the interrupt context when there is a ring
+ * event for the fcp ring. The caller does not hold any lock.
+ * The function processes each response iocb in the response ring until it
+ * finds an iocb with LE bit set and chains all the iocbs up to the iocb with
+ * LE bit set. The function will call the completion handler of the command iocb
+ * if the response iocb indicates a completion for a command iocb or it is
+ * an abort completion. The function will call lpfc_sli_process_unsol_iocb
+ * function if this is an unsolicited iocb.
+ * This routine presumes LPFC_FCP_RING handling and doesn't bother
+ * to check it explicitly.
+ */
+int
+lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
+				struct lpfc_sli_ring *pring, uint32_t mask)
+{
+	struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
+	IOCB_t *irsp = NULL;
+	IOCB_t *entry = NULL;
+	struct lpfc_iocbq *cmdiocbq = NULL;
+	struct lpfc_iocbq rspiocbq;
+	uint32_t status;
+	uint32_t portRspPut, portRspMax;
+	int rc = 1;
+	lpfc_iocb_type type;
+	unsigned long iflag;
+	uint32_t rsp_cmpl = 0;
+
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	pring->stats.iocb_event++;
+
+	/*
+	 * The next available response entry should never exceed the maximum
+	 * entries.  If it does, treat it as an adapter hardware error.
+	 */
+	portRspMax = pring->sli.sli3.numRiocb;
+	portRspPut = le32_to_cpu(pgp->rspPutInx);
+	if (unlikely(portRspPut >= portRspMax)) {
+		lpfc_sli_rsp_pointers_error(phba, pring);
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		return 1;
+	}
+	if (phba->fcp_ring_in_use) {
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		return 1;
+	} else
+		phba->fcp_ring_in_use = 1;
+
+	rmb();
+	while (pring->sli.sli3.rspidx != portRspPut) {
+		/*
+		 * Fetch an entry off the ring and copy it into a local data
+		 * structure.  The copy involves a byte-swap since the
+		 * network byte order and pci byte orders are different.
+		 */
+		entry = lpfc_resp_iocb(phba, pring);
+		phba->last_completion_time = jiffies;
+
+		if (++pring->sli.sli3.rspidx >= portRspMax)
+			pring->sli.sli3.rspidx = 0;
+
+		lpfc_sli_pcimem_bcopy((uint32_t *) entry,
+				      (uint32_t *) &rspiocbq.iocb,
+				      phba->iocb_rsp_size);
+		INIT_LIST_HEAD(&(rspiocbq.list));
+		irsp = &rspiocbq.iocb;
+
+		type = lpfc_sli_iocb_cmd_type(irsp->ulpCommand & CMD_IOCB_MASK);
+		pring->stats.iocb_rsp++;
+		rsp_cmpl++;
+
+		if (unlikely(irsp->ulpStatus)) {
+			/*
+			 * If resource errors reported from HBA, reduce
+			 * queuedepths of the SCSI device.
+			 */
+			if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+			    ((irsp->un.ulpWord[4] & IOERR_PARAM_MASK) ==
+			     IOERR_NO_RESOURCES)) {
+				spin_unlock_irqrestore(&phba->hbalock, iflag);
+				phba->lpfc_rampdown_queue_depth(phba);
+				spin_lock_irqsave(&phba->hbalock, iflag);
+			}
+
+			/* Rsp ring <ringno> error: IOCB */
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"0336 Rsp Ring %d error: IOCB Data: "
+					"x%x x%x x%x x%x x%x x%x x%x x%x\n",
+					pring->ringno,
+					irsp->un.ulpWord[0],
+					irsp->un.ulpWord[1],
+					irsp->un.ulpWord[2],
+					irsp->un.ulpWord[3],
+					irsp->un.ulpWord[4],
+					irsp->un.ulpWord[5],
+					*(uint32_t *)&irsp->un1,
+					*((uint32_t *)&irsp->un1 + 1));
+		}
+
+		switch (type) {
+		case LPFC_ABORT_IOCB:
+		case LPFC_SOL_IOCB:
+			/*
+			 * Idle exchange closed via ABTS from port.  No iocb
+			 * resources need to be recovered.
+			 */
+			if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
+				lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+						"0333 IOCB cmd 0x%x"
+						" processed. Skipping"
+						" completion\n",
+						irsp->ulpCommand);
+				break;
+			}
+
+			cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring,
+							 &rspiocbq);
+			if (unlikely(!cmdiocbq))
+				break;
+			if (cmdiocbq->cmd_flag & LPFC_DRIVER_ABORTED)
+				cmdiocbq->cmd_flag &= ~LPFC_DRIVER_ABORTED;
+			if (cmdiocbq->cmd_cmpl) {
+				spin_unlock_irqrestore(&phba->hbalock, iflag);
+				cmdiocbq->cmd_cmpl(phba, cmdiocbq, &rspiocbq);
+				spin_lock_irqsave(&phba->hbalock, iflag);
+			}
+			break;
+		case LPFC_UNSOL_IOCB:
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			lpfc_sli_process_unsol_iocb(phba, pring, &rspiocbq);
+			spin_lock_irqsave(&phba->hbalock, iflag);
+			break;
+		default:
+			if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
+				char adaptermsg[LPFC_MAX_ADPTMSG];
+				memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
+				memcpy(&adaptermsg[0], (uint8_t *) irsp,
+				       MAX_MSG_DATA);
+				dev_warn(&((phba->pcidev)->dev),
+					 "lpfc%d: %s\n",
+					 phba->brd_no, adaptermsg);
+			} else {
+				/* Unknown IOCB command */
+				lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+						"0334 Unknown IOCB command "
+						"Data: x%x, x%x x%x x%x x%x\n",
+						type, irsp->ulpCommand,
+						irsp->ulpStatus,
+						irsp->ulpIoTag,
+						irsp->ulpContext);
+			}
+			break;
+		}
+
+		/*
+		 * The response IOCB has been processed.  Update the ring
+		 * pointer in SLIM.  If the port response put pointer has not
+		 * been updated, sync the pgp->rspPutInx and fetch the new port
+		 * response put pointer.
+		 */
+		writel(pring->sli.sli3.rspidx,
+			&phba->host_gp[pring->ringno].rspGetInx);
+
+		if (pring->sli.sli3.rspidx == portRspPut)
+			portRspPut = le32_to_cpu(pgp->rspPutInx);
+	}
+
+	if ((rsp_cmpl > 0) && (mask & HA_R0RE_REQ)) {
+		pring->stats.iocb_rsp_full++;
+		status = ((CA_R0ATT | CA_R0RE_RSP) << (pring->ringno * 4));
+		writel(status, phba->CAregaddr);
+		readl(phba->CAregaddr);
+	}
+	if ((mask & HA_R0CE_RSP) && (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
+		pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
+		pring->stats.iocb_cmd_empty++;
+
+		/* Force update of the local copy of cmdGetInx */
+		pring->sli.sli3.local_getidx = le32_to_cpu(pgp->cmdGetInx);
+		lpfc_sli_resume_iocb(phba, pring);
+
+		if ((pring->lpfc_sli_cmd_available))
+			(pring->lpfc_sli_cmd_available) (phba, pring);
+
+	}
+
+	phba->fcp_ring_in_use = 0;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return rc;
+}
+
+/**
+ * lpfc_sli_sp_handle_rspiocb - Handle slow-path response iocb
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @rspiocbp: Pointer to driver response IOCB object.
+ *
+ * This function is called from the worker thread when there is a slow-path
+ * response IOCB to process. This function chains all the response iocbs until
+ * seeing the iocb with the LE bit set. The function will call
+ * lpfc_sli_process_sol_iocb function if the response iocb indicates a
+ * completion of a command iocb. The function will call the
+ * lpfc_sli_process_unsol_iocb function if this is an unsolicited iocb.
+ * The function frees the resources or calls the completion handler if this
+ * iocb is an abort completion. The function returns NULL when the response
+ * iocb has the LE bit set and all the chained iocbs are processed, otherwise
+ * this function shall chain the iocb on to the iocb_continueq and return the
+ * response iocb passed in.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_sp_handle_rspiocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			struct lpfc_iocbq *rspiocbp)
+{
+	struct lpfc_iocbq *saveq;
+	struct lpfc_iocbq *cmdiocb;
+	struct lpfc_iocbq *next_iocb;
+	IOCB_t *irsp;
+	uint32_t free_saveq;
+	u8 cmd_type;
+	lpfc_iocb_type type;
+	unsigned long iflag;
+	u32 ulp_status = get_job_ulpstatus(phba, rspiocbp);
+	u32 ulp_word4 = get_job_word4(phba, rspiocbp);
+	u32 ulp_command = get_job_cmnd(phba, rspiocbp);
+	int rc;
+
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	/* First add the response iocb to the countinueq list */
+	list_add_tail(&rspiocbp->list, &pring->iocb_continueq);
+	pring->iocb_continueq_cnt++;
+
+	/*
+	 * By default, the driver expects to free all resources
+	 * associated with this iocb completion.
+	 */
+	free_saveq = 1;
+	saveq = list_get_first(&pring->iocb_continueq,
+			       struct lpfc_iocbq, list);
+	list_del_init(&pring->iocb_continueq);
+	pring->iocb_continueq_cnt = 0;
+
+	pring->stats.iocb_rsp++;
+
+	/*
+	 * If resource errors reported from HBA, reduce
+	 * queuedepths of the SCSI device.
+	 */
+	if (ulp_status == IOSTAT_LOCAL_REJECT &&
+	    ((ulp_word4 & IOERR_PARAM_MASK) ==
+	     IOERR_NO_RESOURCES)) {
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		phba->lpfc_rampdown_queue_depth(phba);
+		spin_lock_irqsave(&phba->hbalock, iflag);
+	}
+
+	if (ulp_status) {
+		/* Rsp ring <ringno> error: IOCB */
+		if (phba->sli_rev < LPFC_SLI_REV4) {
+			irsp = &rspiocbp->iocb;
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"0328 Rsp Ring %d error: ulp_status x%x "
+					"IOCB Data: "
+					"x%08x x%08x x%08x x%08x "
+					"x%08x x%08x x%08x x%08x "
+					"x%08x x%08x x%08x x%08x "
+					"x%08x x%08x x%08x x%08x\n",
+					pring->ringno, ulp_status,
+					get_job_ulpword(rspiocbp, 0),
+					get_job_ulpword(rspiocbp, 1),
+					get_job_ulpword(rspiocbp, 2),
+					get_job_ulpword(rspiocbp, 3),
+					get_job_ulpword(rspiocbp, 4),
+					get_job_ulpword(rspiocbp, 5),
+					*(((uint32_t *)irsp) + 6),
+					*(((uint32_t *)irsp) + 7),
+					*(((uint32_t *)irsp) + 8),
+					*(((uint32_t *)irsp) + 9),
+					*(((uint32_t *)irsp) + 10),
+					*(((uint32_t *)irsp) + 11),
+					*(((uint32_t *)irsp) + 12),
+					*(((uint32_t *)irsp) + 13),
+					*(((uint32_t *)irsp) + 14),
+					*(((uint32_t *)irsp) + 15));
+		} else {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"0321 Rsp Ring %d error: "
+					"IOCB Data: "
+					"x%x x%x x%x x%x\n",
+					pring->ringno,
+					rspiocbp->wcqe_cmpl.word0,
+					rspiocbp->wcqe_cmpl.total_data_placed,
+					rspiocbp->wcqe_cmpl.parameter,
+					rspiocbp->wcqe_cmpl.word3);
+		}
+	}
+
+
+	/*
+	 * Fetch the iocb command type and call the correct completion
+	 * routine. Solicited and Unsolicited IOCBs on the ELS ring
+	 * get freed back to the lpfc_iocb_list by the discovery
+	 * kernel thread.
+	 */
+	cmd_type = ulp_command & CMD_IOCB_MASK;
+	type = lpfc_sli_iocb_cmd_type(cmd_type);
+	switch (type) {
+	case LPFC_SOL_IOCB:
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		rc = lpfc_sli_process_sol_iocb(phba, pring, saveq);
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		break;
+	case LPFC_UNSOL_IOCB:
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		rc = lpfc_sli_process_unsol_iocb(phba, pring, saveq);
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		if (!rc)
+			free_saveq = 0;
+		break;
+	case LPFC_ABORT_IOCB:
+		cmdiocb = NULL;
+		if (ulp_command != CMD_XRI_ABORTED_CX)
+			cmdiocb = lpfc_sli_iocbq_lookup(phba, pring,
+							saveq);
+		if (cmdiocb) {
+			/* Call the specified completion routine */
+			if (cmdiocb->cmd_cmpl) {
+				spin_unlock_irqrestore(&phba->hbalock, iflag);
+				cmdiocb->cmd_cmpl(phba, cmdiocb, saveq);
+				spin_lock_irqsave(&phba->hbalock, iflag);
+			} else {
+				__lpfc_sli_release_iocbq(phba, cmdiocb);
+			}
+		}
+		break;
+	case LPFC_UNKNOWN_IOCB:
+		if (ulp_command == CMD_ADAPTER_MSG) {
+			char adaptermsg[LPFC_MAX_ADPTMSG];
+
+			memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
+			memcpy(&adaptermsg[0], (uint8_t *)&rspiocbp->wqe,
+			       MAX_MSG_DATA);
+			dev_warn(&((phba->pcidev)->dev),
+				 "lpfc%d: %s\n",
+				 phba->brd_no, adaptermsg);
+		} else {
+			/* Unknown command */
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"0335 Unknown IOCB "
+					"command Data: x%x "
+					"x%x x%x x%x\n",
+					ulp_command,
+					ulp_status,
+					get_wqe_reqtag(rspiocbp),
+					get_job_ulpcontext(phba, rspiocbp));
+		}
+		break;
+	}
+
+	if (free_saveq) {
+		list_for_each_entry_safe(rspiocbp, next_iocb,
+					 &saveq->list, list) {
+			list_del_init(&rspiocbp->list);
+			__lpfc_sli_release_iocbq(phba, rspiocbp);
+		}
+		__lpfc_sli_release_iocbq(phba, saveq);
+	}
+	rspiocbp = NULL;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return rspiocbp;
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event - Wrapper func for handling slow-path iocbs
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This routine wraps the actual slow_ring event process routine from the
+ * API jump table function pointer from the lpfc_hba struct.
+ **/
+void
+lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
+				struct lpfc_sli_ring *pring, uint32_t mask)
+{
+	phba->lpfc_sli_handle_slow_ring_event(phba, pring, mask);
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event_s3 - Handle SLI3 ring event for non-FCP rings
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the worker thread when there is a ring event
+ * for non-fcp rings. The caller does not hold any lock. The function will
+ * remove each response iocb in the response ring and calls the handle
+ * response iocb routine (lpfc_sli_sp_handle_rspiocb) to process it.
+ **/
+static void
+lpfc_sli_handle_slow_ring_event_s3(struct lpfc_hba *phba,
+				   struct lpfc_sli_ring *pring, uint32_t mask)
+{
+	struct lpfc_pgp *pgp;
+	IOCB_t *entry;
+	IOCB_t *irsp = NULL;
+	struct lpfc_iocbq *rspiocbp = NULL;
+	uint32_t portRspPut, portRspMax;
+	unsigned long iflag;
+	uint32_t status;
+
+	pgp = &phba->port_gp[pring->ringno];
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	pring->stats.iocb_event++;
+
+	/*
+	 * The next available response entry should never exceed the maximum
+	 * entries.  If it does, treat it as an adapter hardware error.
+	 */
+	portRspMax = pring->sli.sli3.numRiocb;
+	portRspPut = le32_to_cpu(pgp->rspPutInx);
+	if (portRspPut >= portRspMax) {
+		/*
+		 * Ring <ringno> handler: portRspPut <portRspPut> is bigger than
+		 * rsp ring <portRspMax>
+		 */
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0303 Ring %d handler: portRspPut %d "
+				"is bigger than rsp ring %d\n",
+				pring->ringno, portRspPut, portRspMax);
+
+		phba->link_state = LPFC_HBA_ERROR;
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+		phba->work_hs = HS_FFER3;
+		lpfc_handle_eratt(phba);
+
+		return;
+	}
+
+	rmb();
+	while (pring->sli.sli3.rspidx != portRspPut) {
+		/*
+		 * Build a completion list and call the appropriate handler.
+		 * The process is to get the next available response iocb, get
+		 * a free iocb from the list, copy the response data into the
+		 * free iocb, insert to the continuation list, and update the
+		 * next response index to slim.  This process makes response
+		 * iocb's in the ring available to DMA as fast as possible but
+		 * pays a penalty for a copy operation.  Since the iocb is
+		 * only 32 bytes, this penalty is considered small relative to
+		 * the PCI reads for register values and a slim write.  When
+		 * the ulpLe field is set, the entire Command has been
+		 * received.
+		 */
+		entry = lpfc_resp_iocb(phba, pring);
+
+		phba->last_completion_time = jiffies;
+		rspiocbp = __lpfc_sli_get_iocbq(phba);
+		if (rspiocbp == NULL) {
+			printk(KERN_ERR "%s: out of buffers! Failing "
+			       "completion.\n", __func__);
+			break;
+		}
+
+		lpfc_sli_pcimem_bcopy(entry, &rspiocbp->iocb,
+				      phba->iocb_rsp_size);
+		irsp = &rspiocbp->iocb;
+
+		if (++pring->sli.sli3.rspidx >= portRspMax)
+			pring->sli.sli3.rspidx = 0;
+
+		if (pring->ringno == LPFC_ELS_RING) {
+			lpfc_debugfs_slow_ring_trc(phba,
+			"IOCB rsp ring:   wd4:x%08x wd6:x%08x wd7:x%08x",
+				*(((uint32_t *) irsp) + 4),
+				*(((uint32_t *) irsp) + 6),
+				*(((uint32_t *) irsp) + 7));
+		}
+
+		writel(pring->sli.sli3.rspidx,
+			&phba->host_gp[pring->ringno].rspGetInx);
+
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		/* Handle the response IOCB */
+		rspiocbp = lpfc_sli_sp_handle_rspiocb(phba, pring, rspiocbp);
+		spin_lock_irqsave(&phba->hbalock, iflag);
+
+		/*
+		 * If the port response put pointer has not been updated, sync
+		 * the pgp->rspPutInx in the MAILBOX_tand fetch the new port
+		 * response put pointer.
+		 */
+		if (pring->sli.sli3.rspidx == portRspPut) {
+			portRspPut = le32_to_cpu(pgp->rspPutInx);
+		}
+	} /* while (pring->sli.sli3.rspidx != portRspPut) */
+
+	if ((rspiocbp != NULL) && (mask & HA_R0RE_REQ)) {
+		/* At least one response entry has been freed */
+		pring->stats.iocb_rsp_full++;
+		/* SET RxRE_RSP in Chip Att register */
+		status = ((CA_R0ATT | CA_R0RE_RSP) << (pring->ringno * 4));
+		writel(status, phba->CAregaddr);
+		readl(phba->CAregaddr); /* flush */
+	}
+	if ((mask & HA_R0CE_RSP) && (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
+		pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
+		pring->stats.iocb_cmd_empty++;
+
+		/* Force update of the local copy of cmdGetInx */
+		pring->sli.sli3.local_getidx = le32_to_cpu(pgp->cmdGetInx);
+		lpfc_sli_resume_iocb(phba, pring);
+
+		if ((pring->lpfc_sli_cmd_available))
+			(pring->lpfc_sli_cmd_available) (phba, pring);
+
+	}
+
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return;
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event_s4 - Handle SLI4 slow-path els events
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the worker thread when there is a pending
+ * ELS response iocb on the driver internal slow-path response iocb worker
+ * queue. The caller does not hold any lock. The function will remove each
+ * response iocb from the response worker queue and calls the handle
+ * response iocb routine (lpfc_sli_sp_handle_rspiocb) to process it.
+ **/
+static void
+lpfc_sli_handle_slow_ring_event_s4(struct lpfc_hba *phba,
+				   struct lpfc_sli_ring *pring, uint32_t mask)
+{
+	struct lpfc_iocbq *irspiocbq;
+	struct hbq_dmabuf *dmabuf;
+	struct lpfc_cq_event *cq_event;
+	unsigned long iflag;
+	int count = 0;
+
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	phba->hba_flag &= ~HBA_SP_QUEUE_EVT;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	while (!list_empty(&phba->sli4_hba.sp_queue_event)) {
+		/* Get the response iocb from the head of work queue */
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		list_remove_head(&phba->sli4_hba.sp_queue_event,
+				 cq_event, struct lpfc_cq_event, list);
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+		switch (bf_get(lpfc_wcqe_c_code, &cq_event->cqe.wcqe_cmpl)) {
+		case CQE_CODE_COMPL_WQE:
+			irspiocbq = container_of(cq_event, struct lpfc_iocbq,
+						 cq_event);
+			/* Translate ELS WCQE to response IOCBQ */
+			irspiocbq = lpfc_sli4_els_preprocess_rspiocbq(phba,
+								      irspiocbq);
+			if (irspiocbq)
+				lpfc_sli_sp_handle_rspiocb(phba, pring,
+							   irspiocbq);
+			count++;
+			break;
+		case CQE_CODE_RECEIVE:
+		case CQE_CODE_RECEIVE_V1:
+			dmabuf = container_of(cq_event, struct hbq_dmabuf,
+					      cq_event);
+			lpfc_sli4_handle_received_buffer(phba, dmabuf);
+			count++;
+			break;
+		default:
+			break;
+		}
+
+		/* Limit the number of events to 64 to avoid soft lockups */
+		if (count == 64)
+			break;
+	}
+}
+
+/**
+ * lpfc_sli_abort_iocb_ring - Abort all iocbs in the ring
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ *
+ * This function aborts all iocbs in the given ring and frees all the iocb
+ * objects in txq. This function issues an abort iocb for all the iocb commands
+ * in txcmplq. The iocbs in the txcmplq is not guaranteed to complete before
+ * the return of this function. The caller is not required to hold any locks.
+ **/
+void
+lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
+{
+	LIST_HEAD(tx_completions);
+	LIST_HEAD(txcmplq_completions);
+	struct lpfc_iocbq *iocb, *next_iocb;
+	int offline;
+
+	if (pring->ringno == LPFC_ELS_RING) {
+		lpfc_fabric_abort_hba(phba);
+	}
+	offline = pci_channel_offline(phba->pcidev);
+
+	/* Error everything on txq and txcmplq
+	 * First do the txq.
+	 */
+	if (phba->sli_rev >= LPFC_SLI_REV4) {
+		spin_lock_irq(&pring->ring_lock);
+		list_splice_init(&pring->txq, &tx_completions);
+		pring->txq_cnt = 0;
+
+		if (offline) {
+			list_splice_init(&pring->txcmplq,
+					 &txcmplq_completions);
+		} else {
+			/* Next issue ABTS for everything on the txcmplq */
+			list_for_each_entry_safe(iocb, next_iocb,
+						 &pring->txcmplq, list)
+				lpfc_sli_issue_abort_iotag(phba, pring,
+							   iocb, NULL);
+		}
+		spin_unlock_irq(&pring->ring_lock);
+	} else {
+		spin_lock_irq(&phba->hbalock);
+		list_splice_init(&pring->txq, &tx_completions);
+		pring->txq_cnt = 0;
+
+		if (offline) {
+			list_splice_init(&pring->txcmplq, &txcmplq_completions);
+		} else {
+			/* Next issue ABTS for everything on the txcmplq */
+			list_for_each_entry_safe(iocb, next_iocb,
+						 &pring->txcmplq, list)
+				lpfc_sli_issue_abort_iotag(phba, pring,
+							   iocb, NULL);
+		}
+		spin_unlock_irq(&phba->hbalock);
+	}
+
+	if (offline) {
+		/* Cancel all the IOCBs from the completions list */
+		lpfc_sli_cancel_iocbs(phba, &txcmplq_completions,
+				      IOSTAT_LOCAL_REJECT, IOERR_SLI_ABORTED);
+	} else {
+		/* Make sure HBA is alive */
+		lpfc_issue_hb_tmo(phba);
+	}
+	/* Cancel all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &tx_completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_ABORTED);
+}
+
+/**
+ * lpfc_sli_abort_fcp_rings - Abort all iocbs in all FCP rings
+ * @phba: Pointer to HBA context object.
+ *
+ * This function aborts all iocbs in FCP rings and frees all the iocb
+ * objects in txq. This function issues an abort iocb for all the iocb commands
+ * in txcmplq. The iocbs in the txcmplq is not guaranteed to complete before
+ * the return of this function. The caller is not required to hold any locks.
+ **/
+void
+lpfc_sli_abort_fcp_rings(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_sli_ring  *pring;
+	uint32_t i;
+
+	/* Look on all the FCP Rings for the iotag */
+	if (phba->sli_rev >= LPFC_SLI_REV4) {
+		for (i = 0; i < phba->cfg_hdw_queue; i++) {
+			pring = phba->sli4_hba.hdwq[i].io_wq->pring;
+			lpfc_sli_abort_iocb_ring(phba, pring);
+		}
+	} else {
+		pring = &psli->sli3_ring[LPFC_FCP_RING];
+		lpfc_sli_abort_iocb_ring(phba, pring);
+	}
+}
+
+/**
+ * lpfc_sli_flush_io_rings - flush all iocbs in the IO ring
+ * @phba: Pointer to HBA context object.
+ *
+ * This function flushes all iocbs in the IO ring and frees all the iocb
+ * objects in txq and txcmplq. This function will not issue abort iocbs
+ * for all the iocb commands in txcmplq, they will just be returned with
+ * IOERR_SLI_DOWN. This function is invoked with EEH when device's PCI
+ * slot has been permanently disabled.
+ **/
+void
+lpfc_sli_flush_io_rings(struct lpfc_hba *phba)
+{
+	LIST_HEAD(txq);
+	LIST_HEAD(txcmplq);
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_sli_ring  *pring;
+	uint32_t i;
+	struct lpfc_iocbq *piocb, *next_iocb;
+
+	spin_lock_irq(&phba->hbalock);
+	/* Indicate the I/O queues are flushed */
+	phba->hba_flag |= HBA_IOQ_FLUSH;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Look on all the FCP Rings for the iotag */
+	if (phba->sli_rev >= LPFC_SLI_REV4) {
+		for (i = 0; i < phba->cfg_hdw_queue; i++) {
+			pring = phba->sli4_hba.hdwq[i].io_wq->pring;
+
+			spin_lock_irq(&pring->ring_lock);
+			/* Retrieve everything on txq */
+			list_splice_init(&pring->txq, &txq);
+			list_for_each_entry_safe(piocb, next_iocb,
+						 &pring->txcmplq, list)
+				piocb->cmd_flag &= ~LPFC_IO_ON_TXCMPLQ;
+			/* Retrieve everything on the txcmplq */
+			list_splice_init(&pring->txcmplq, &txcmplq);
+			pring->txq_cnt = 0;
+			pring->txcmplq_cnt = 0;
+			spin_unlock_irq(&pring->ring_lock);
+
+			/* Flush the txq */
+			lpfc_sli_cancel_iocbs(phba, &txq,
+					      IOSTAT_LOCAL_REJECT,
+					      IOERR_SLI_DOWN);
+			/* Flush the txcmplq */
+			lpfc_sli_cancel_iocbs(phba, &txcmplq,
+					      IOSTAT_LOCAL_REJECT,
+					      IOERR_SLI_DOWN);
+			if (unlikely(pci_channel_offline(phba->pcidev)))
+				lpfc_sli4_io_xri_aborted(phba, NULL, 0);
+		}
+	} else {
+		pring = &psli->sli3_ring[LPFC_FCP_RING];
+
+		spin_lock_irq(&phba->hbalock);
+		/* Retrieve everything on txq */
+		list_splice_init(&pring->txq, &txq);
+		list_for_each_entry_safe(piocb, next_iocb,
+					 &pring->txcmplq, list)
+			piocb->cmd_flag &= ~LPFC_IO_ON_TXCMPLQ;
+		/* Retrieve everything on the txcmplq */
+		list_splice_init(&pring->txcmplq, &txcmplq);
+		pring->txq_cnt = 0;
+		pring->txcmplq_cnt = 0;
+		spin_unlock_irq(&phba->hbalock);
+
+		/* Flush the txq */
+		lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT,
+				      IOERR_SLI_DOWN);
+		/* Flush the txcmpq */
+		lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT,
+				      IOERR_SLI_DOWN);
+	}
+}
+
+/**
+ * lpfc_sli_brdready_s3 - Check for sli3 host ready status
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This function reads the host status register and compares
+ * with the provided bit mask to check if HBA completed
+ * the restart. This function will wait in a loop for the
+ * HBA to complete restart. If the HBA does not restart within
+ * 15 iterations, the function will reset the HBA again. The
+ * function returns 1 when HBA fail to restart otherwise returns
+ * zero.
+ **/
+static int
+lpfc_sli_brdready_s3(struct lpfc_hba *phba, uint32_t mask)
+{
+	uint32_t status;
+	int i = 0;
+	int retval = 0;
+
+	/* Read the HBA Host Status Register */
+	if (lpfc_readl(phba->HSregaddr, &status))
+		return 1;
+
+	phba->hba_flag |= HBA_NEEDS_CFG_PORT;
+
+	/*
+	 * Check status register every 100ms for 5 retries, then every
+	 * 500ms for 5, then every 2.5 sec for 5, then reset board and
+	 * every 2.5 sec for 4.
+	 * Break our of the loop if errors occurred during init.
+	 */
+	while (((status & mask) != mask) &&
+	       !(status & HS_FFERM) &&
+	       i++ < 20) {
+
+		if (i <= 5)
+			msleep(10);
+		else if (i <= 10)
+			msleep(500);
+		else
+			msleep(2500);
+
+		if (i == 15) {
+				/* Do post */
+			phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+			lpfc_sli_brdrestart(phba);
+		}
+		/* Read the HBA Host Status Register */
+		if (lpfc_readl(phba->HSregaddr, &status)) {
+			retval = 1;
+			break;
+		}
+	}
+
+	/* Check to see if any errors occurred during init */
+	if ((status & HS_FFERM) || (i >= 20)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2751 Adapter failed to restart, "
+				"status reg x%x, FW Data: A8 x%x AC x%x\n",
+				status,
+				readl(phba->MBslimaddr + 0xa8),
+				readl(phba->MBslimaddr + 0xac));
+		phba->link_state = LPFC_HBA_ERROR;
+		retval = 1;
+	}
+
+	return retval;
+}
+
+/**
+ * lpfc_sli_brdready_s4 - Check for sli4 host ready status
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This function checks the host status register to check if HBA is
+ * ready. This function will wait in a loop for the HBA to be ready
+ * If the HBA is not ready , the function will will reset the HBA PCI
+ * function again. The function returns 1 when HBA fail to be ready
+ * otherwise returns zero.
+ **/
+static int
+lpfc_sli_brdready_s4(struct lpfc_hba *phba, uint32_t mask)
+{
+	uint32_t status;
+	int retval = 0;
+
+	/* Read the HBA Host Status Register */
+	status = lpfc_sli4_post_status_check(phba);
+
+	if (status) {
+		phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+		lpfc_sli_brdrestart(phba);
+		status = lpfc_sli4_post_status_check(phba);
+	}
+
+	/* Check to see if any errors occurred during init */
+	if (status) {
+		phba->link_state = LPFC_HBA_ERROR;
+		retval = 1;
+	} else
+		phba->sli4_hba.intr_enable = 0;
+
+	phba->hba_flag &= ~HBA_SETUP;
+	return retval;
+}
+
+/**
+ * lpfc_sli_brdready - Wrapper func for checking the hba readyness
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba readyness check routine
+ * from the API jump table function pointer from the lpfc_hba struct.
+ **/
+int
+lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
+{
+	return phba->lpfc_sli_brdready(phba, mask);
+}
+
+#define BARRIER_TEST_PATTERN (0xdeadbeef)
+
+/**
+ * lpfc_reset_barrier - Make HBA ready for HBA reset
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called before resetting an HBA. This function is called
+ * with hbalock held and requests HBA to quiesce DMAs before a reset.
+ **/
+void lpfc_reset_barrier(struct lpfc_hba *phba)
+{
+	uint32_t __iomem *resp_buf;
+	uint32_t __iomem *mbox_buf;
+	volatile struct MAILBOX_word0 mbox;
+	uint32_t hc_copy, ha_copy, resp_data;
+	int  i;
+	uint8_t hdrtype;
+
+	lockdep_assert_held(&phba->hbalock);
+
+	pci_read_config_byte(phba->pcidev, PCI_HEADER_TYPE, &hdrtype);
+	if (hdrtype != 0x80 ||
+	    (FC_JEDEC_ID(phba->vpd.rev.biuRev) != HELIOS_JEDEC_ID &&
+	     FC_JEDEC_ID(phba->vpd.rev.biuRev) != THOR_JEDEC_ID))
+		return;
+
+	/*
+	 * Tell the other part of the chip to suspend temporarily all
+	 * its DMA activity.
+	 */
+	resp_buf = phba->MBslimaddr;
+
+	/* Disable the error attention */
+	if (lpfc_readl(phba->HCregaddr, &hc_copy))
+		return;
+	writel((hc_copy & ~HC_ERINT_ENA), phba->HCregaddr);
+	readl(phba->HCregaddr); /* flush */
+	phba->link_flag |= LS_IGNORE_ERATT;
+
+	if (lpfc_readl(phba->HAregaddr, &ha_copy))
+		return;
+	if (ha_copy & HA_ERATT) {
+		/* Clear Chip error bit */
+		writel(HA_ERATT, phba->HAregaddr);
+		phba->pport->stopped = 1;
+	}
+
+	mbox.word0 = 0;
+	mbox.mbxCommand = MBX_KILL_BOARD;
+	mbox.mbxOwner = OWN_CHIP;
+
+	writel(BARRIER_TEST_PATTERN, (resp_buf + 1));
+	mbox_buf = phba->MBslimaddr;
+	writel(mbox.word0, mbox_buf);
+
+	for (i = 0; i < 50; i++) {
+		if (lpfc_readl((resp_buf + 1), &resp_data))
+			return;
+		if (resp_data != ~(BARRIER_TEST_PATTERN))
+			mdelay(1);
+		else
+			break;
+	}
+	resp_data = 0;
+	if (lpfc_readl((resp_buf + 1), &resp_data))
+		return;
+	if (resp_data  != ~(BARRIER_TEST_PATTERN)) {
+		if (phba->sli.sli_flag & LPFC_SLI_ACTIVE ||
+		    phba->pport->stopped)
+			goto restore_hc;
+		else
+			goto clear_errat;
+	}
+
+	mbox.mbxOwner = OWN_HOST;
+	resp_data = 0;
+	for (i = 0; i < 500; i++) {
+		if (lpfc_readl(resp_buf, &resp_data))
+			return;
+		if (resp_data != mbox.word0)
+			mdelay(1);
+		else
+			break;
+	}
+
+clear_errat:
+
+	while (++i < 500) {
+		if (lpfc_readl(phba->HAregaddr, &ha_copy))
+			return;
+		if (!(ha_copy & HA_ERATT))
+			mdelay(1);
+		else
+			break;
+	}
+
+	if (readl(phba->HAregaddr) & HA_ERATT) {
+		writel(HA_ERATT, phba->HAregaddr);
+		phba->pport->stopped = 1;
+	}
+
+restore_hc:
+	phba->link_flag &= ~LS_IGNORE_ERATT;
+	writel(hc_copy, phba->HCregaddr);
+	readl(phba->HCregaddr); /* flush */
+}
+
+/**
+ * lpfc_sli_brdkill - Issue a kill_board mailbox command
+ * @phba: Pointer to HBA context object.
+ *
+ * This function issues a kill_board mailbox command and waits for
+ * the error attention interrupt. This function is called for stopping
+ * the firmware processing. The caller is not required to hold any
+ * locks. This function calls lpfc_hba_down_post function to free
+ * any pending commands after the kill. The function will return 1 when it
+ * fails to kill the board else will return 0.
+ **/
+int
+lpfc_sli_brdkill(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli;
+	LPFC_MBOXQ_t *pmb;
+	uint32_t status;
+	uint32_t ha_copy;
+	int retval;
+	int i = 0;
+
+	psli = &phba->sli;
+
+	/* Kill HBA */
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0329 Kill HBA Data: x%x x%x\n",
+			phba->pport->port_state, psli->sli_flag);
+
+	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb)
+		return 1;
+
+	/* Disable the error attention */
+	spin_lock_irq(&phba->hbalock);
+	if (lpfc_readl(phba->HCregaddr, &status)) {
+		spin_unlock_irq(&phba->hbalock);
+		mempool_free(pmb, phba->mbox_mem_pool);
+		return 1;
+	}
+	status &= ~HC_ERINT_ENA;
+	writel(status, phba->HCregaddr);
+	readl(phba->HCregaddr); /* flush */
+	phba->link_flag |= LS_IGNORE_ERATT;
+	spin_unlock_irq(&phba->hbalock);
+
+	lpfc_kill_board(phba, pmb);
+	pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	retval = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+
+	if (retval != MBX_SUCCESS) {
+		if (retval != MBX_BUSY)
+			mempool_free(pmb, phba->mbox_mem_pool);
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2752 KILL_BOARD command failed retval %d\n",
+				retval);
+		spin_lock_irq(&phba->hbalock);
+		phba->link_flag &= ~LS_IGNORE_ERATT;
+		spin_unlock_irq(&phba->hbalock);
+		return 1;
+	}
+
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
+	spin_unlock_irq(&phba->hbalock);
+
+	mempool_free(pmb, phba->mbox_mem_pool);
+
+	/* There is no completion for a KILL_BOARD mbox cmd. Check for an error
+	 * attention every 100ms for 3 seconds. If we don't get ERATT after
+	 * 3 seconds we still set HBA_ERROR state because the status of the
+	 * board is now undefined.
+	 */
+	if (lpfc_readl(phba->HAregaddr, &ha_copy))
+		return 1;
+	while ((i++ < 30) && !(ha_copy & HA_ERATT)) {
+		mdelay(100);
+		if (lpfc_readl(phba->HAregaddr, &ha_copy))
+			return 1;
+	}
+
+	del_timer_sync(&psli->mbox_tmo);
+	if (ha_copy & HA_ERATT) {
+		writel(HA_ERATT, phba->HAregaddr);
+		phba->pport->stopped = 1;
+	}
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	psli->mbox_active = NULL;
+	phba->link_flag &= ~LS_IGNORE_ERATT;
+	spin_unlock_irq(&phba->hbalock);
+
+	lpfc_hba_down_post(phba);
+	phba->link_state = LPFC_HBA_ERROR;
+
+	return ha_copy & HA_ERATT ? 0 : 1;
+}
+
+/**
+ * lpfc_sli_brdreset - Reset a sli-2 or sli-3 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function resets the HBA by writing HC_INITFF to the control
+ * register. After the HBA resets, this function resets all the iocb ring
+ * indices. This function disables PCI layer parity checking during
+ * the reset.
+ * This function returns 0 always.
+ * The caller is not required to hold any locks.
+ **/
+int
+lpfc_sli_brdreset(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli;
+	struct lpfc_sli_ring *pring;
+	uint16_t cfg_value;
+	int i;
+
+	psli = &phba->sli;
+
+	/* Reset HBA */
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0325 Reset HBA Data: x%x x%x\n",
+			(phba->pport) ? phba->pport->port_state : 0,
+			psli->sli_flag);
+
+	/* perform board reset */
+	phba->fc_eventTag = 0;
+	phba->link_events = 0;
+	phba->hba_flag |= HBA_NEEDS_CFG_PORT;
+	if (phba->pport) {
+		phba->pport->fc_myDID = 0;
+		phba->pport->fc_prevDID = 0;
+	}
+
+	/* Turn off parity checking and serr during the physical reset */
+	if (pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value))
+		return -EIO;
+
+	pci_write_config_word(phba->pcidev, PCI_COMMAND,
+			      (cfg_value &
+			       ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
+
+	psli->sli_flag &= ~(LPFC_SLI_ACTIVE | LPFC_PROCESS_LA);
+
+	/* Now toggle INITFF bit in the Host Control Register */
+	writel(HC_INITFF, phba->HCregaddr);
+	mdelay(1);
+	readl(phba->HCregaddr); /* flush */
+	writel(0, phba->HCregaddr);
+	readl(phba->HCregaddr); /* flush */
+
+	/* Restore PCI cmd register */
+	pci_write_config_word(phba->pcidev, PCI_COMMAND, cfg_value);
+
+	/* Initialize relevant SLI info */
+	for (i = 0; i < psli->num_rings; i++) {
+		pring = &psli->sli3_ring[i];
+		pring->flag = 0;
+		pring->sli.sli3.rspidx = 0;
+		pring->sli.sli3.next_cmdidx  = 0;
+		pring->sli.sli3.local_getidx = 0;
+		pring->sli.sli3.cmdidx = 0;
+		pring->missbufcnt = 0;
+	}
+
+	phba->link_state = LPFC_WARM_START;
+	return 0;
+}
+
+/**
+ * lpfc_sli4_brdreset - Reset a sli-4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function resets a SLI4 HBA. This function disables PCI layer parity
+ * checking during resets the device. The caller is not required to hold
+ * any locks.
+ *
+ * This function returns 0 on success else returns negative error code.
+ **/
+int
+lpfc_sli4_brdreset(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	uint16_t cfg_value;
+	int rc = 0;
+
+	/* Reset HBA */
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0295 Reset HBA Data: x%x x%x x%x\n",
+			phba->pport->port_state, psli->sli_flag,
+			phba->hba_flag);
+
+	/* perform board reset */
+	phba->fc_eventTag = 0;
+	phba->link_events = 0;
+	phba->pport->fc_myDID = 0;
+	phba->pport->fc_prevDID = 0;
+	phba->hba_flag &= ~HBA_SETUP;
+
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag &= ~(LPFC_PROCESS_LA);
+	phba->fcf.fcf_flag = 0;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Now physically reset the device */
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0389 Performing PCI function reset!\n");
+
+	/* Turn off parity checking and serr during the physical reset */
+	if (pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value)) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"3205 PCI read Config failed\n");
+		return -EIO;
+	}
+
+	pci_write_config_word(phba->pcidev, PCI_COMMAND, (cfg_value &
+			      ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
+
+	/* Perform FCoE PCI function reset before freeing queue memory */
+	rc = lpfc_pci_function_reset(phba);
+
+	/* Restore PCI cmd register */
+	pci_write_config_word(phba->pcidev, PCI_COMMAND, cfg_value);
+
+	return rc;
+}
+
+/**
+ * lpfc_sli_brdrestart_s3 - Restart a sli-3 hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI initialization code path to
+ * restart the HBA. The caller is not required to hold any lock.
+ * This function writes MBX_RESTART mailbox command to the SLIM and
+ * resets the HBA. At the end of the function, it calls lpfc_hba_down_post
+ * function to free any pending commands. The function enables
+ * POST only during the first initialization. The function returns zero.
+ * The function does not guarantee completion of MBX_RESTART mailbox
+ * command before the return of this function.
+ **/
+static int
+lpfc_sli_brdrestart_s3(struct lpfc_hba *phba)
+{
+	volatile struct MAILBOX_word0 mb;
+	struct lpfc_sli *psli;
+	void __iomem *to_slim;
+	uint32_t hba_aer_enabled;
+
+	spin_lock_irq(&phba->hbalock);
+
+	/* Take PCIe device Advanced Error Reporting (AER) state */
+	hba_aer_enabled = phba->hba_flag & HBA_AER_ENABLED;
+
+	psli = &phba->sli;
+
+	/* Restart HBA */
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0337 Restart HBA Data: x%x x%x\n",
+			(phba->pport) ? phba->pport->port_state : 0,
+			psli->sli_flag);
+
+	mb.word0 = 0;
+	mb.mbxCommand = MBX_RESTART;
+	mb.mbxHc = 1;
+
+	lpfc_reset_barrier(phba);
+
+	to_slim = phba->MBslimaddr;
+	writel(mb.word0, to_slim);
+	readl(to_slim); /* flush */
+
+	/* Only skip post after fc_ffinit is completed */
+	if (phba->pport && phba->pport->port_state)
+		mb.word0 = 1;	/* This is really setting up word1 */
+	else
+		mb.word0 = 0;	/* This is really setting up word1 */
+	to_slim = phba->MBslimaddr + sizeof (uint32_t);
+	writel(mb.word0, to_slim);
+	readl(to_slim); /* flush */
+
+	lpfc_sli_brdreset(phba);
+	if (phba->pport)
+		phba->pport->stopped = 0;
+	phba->link_state = LPFC_INIT_START;
+	phba->hba_flag = 0;
+	spin_unlock_irq(&phba->hbalock);
+
+	memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
+	psli->stats_start = ktime_get_seconds();
+
+	/* Give the INITFF and Post time to settle. */
+	mdelay(100);
+
+	/* Reset HBA AER if it was enabled, note hba_flag was reset above */
+	if (hba_aer_enabled)
+		pci_disable_pcie_error_reporting(phba->pcidev);
+
+	lpfc_hba_down_post(phba);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart_s4 - Restart the sli-4 hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI initialization code path to restart
+ * a SLI4 HBA. The caller is not required to hold any lock.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static int
+lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	uint32_t hba_aer_enabled;
+	int rc;
+
+	/* Restart HBA */
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0296 Restart HBA Data: x%x x%x\n",
+			phba->pport->port_state, psli->sli_flag);
+
+	/* Take PCIe device Advanced Error Reporting (AER) state */
+	hba_aer_enabled = phba->hba_flag & HBA_AER_ENABLED;
+
+	rc = lpfc_sli4_brdreset(phba);
+	if (rc) {
+		phba->link_state = LPFC_HBA_ERROR;
+		goto hba_down_queue;
+	}
+
+	spin_lock_irq(&phba->hbalock);
+	phba->pport->stopped = 0;
+	phba->link_state = LPFC_INIT_START;
+	phba->hba_flag = 0;
+	/* Preserve FA-PWWN expectation */
+	phba->sli4_hba.fawwpn_flag &= LPFC_FAWWPN_FABRIC;
+	spin_unlock_irq(&phba->hbalock);
+
+	memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
+	psli->stats_start = ktime_get_seconds();
+
+	/* Reset HBA AER if it was enabled, note hba_flag was reset above */
+	if (hba_aer_enabled)
+		pci_disable_pcie_error_reporting(phba->pcidev);
+
+hba_down_queue:
+	lpfc_hba_down_post(phba);
+	lpfc_sli4_queue_destroy(phba);
+
+	return rc;
+}
+
+/**
+ * lpfc_sli_brdrestart - Wrapper func for restarting hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba restart routine from the
+ * API jump table function pointer from the lpfc_hba struct.
+**/
+int
+lpfc_sli_brdrestart(struct lpfc_hba *phba)
+{
+	return phba->lpfc_sli_brdrestart(phba);
+}
+
+/**
+ * lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called after a HBA restart to wait for successful
+ * restart of the HBA. Successful restart of the HBA is indicated by
+ * HS_FFRDY and HS_MBRDY bits. If the HBA fails to restart even after 15
+ * iteration, the function will restart the HBA again. The function returns
+ * zero if HBA successfully restarted else returns negative error code.
+ **/
+int
+lpfc_sli_chipset_init(struct lpfc_hba *phba)
+{
+	uint32_t status, i = 0;
+
+	/* Read the HBA Host Status Register */
+	if (lpfc_readl(phba->HSregaddr, &status))
+		return -EIO;
+
+	/* Check status register to see what current state is */
+	i = 0;
+	while ((status & (HS_FFRDY | HS_MBRDY)) != (HS_FFRDY | HS_MBRDY)) {
+
+		/* Check every 10ms for 10 retries, then every 100ms for 90
+		 * retries, then every 1 sec for 50 retires for a total of
+		 * ~60 seconds before reset the board again and check every
+		 * 1 sec for 50 retries. The up to 60 seconds before the
+		 * board ready is required by the Falcon FIPS zeroization
+		 * complete, and any reset the board in between shall cause
+		 * restart of zeroization, further delay the board ready.
+		 */
+		if (i++ >= 200) {
+			/* Adapter failed to init, timeout, status reg
+			   <status> */
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"0436 Adapter failed to init, "
+					"timeout, status reg x%x, "
+					"FW Data: A8 x%x AC x%x\n", status,
+					readl(phba->MBslimaddr + 0xa8),
+					readl(phba->MBslimaddr + 0xac));
+			phba->link_state = LPFC_HBA_ERROR;
+			return -ETIMEDOUT;
+		}
+
+		/* Check to see if any errors occurred during init */
+		if (status & HS_FFERM) {
+			/* ERROR: During chipset initialization */
+			/* Adapter failed to init, chipset, status reg
+			   <status> */
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"0437 Adapter failed to init, "
+					"chipset, status reg x%x, "
+					"FW Data: A8 x%x AC x%x\n", status,
+					readl(phba->MBslimaddr + 0xa8),
+					readl(phba->MBslimaddr + 0xac));
+			phba->link_state = LPFC_HBA_ERROR;
+			return -EIO;
+		}
+
+		if (i <= 10)
+			msleep(10);
+		else if (i <= 100)
+			msleep(100);
+		else
+			msleep(1000);
+
+		if (i == 150) {
+			/* Do post */
+			phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+			lpfc_sli_brdrestart(phba);
+		}
+		/* Read the HBA Host Status Register */
+		if (lpfc_readl(phba->HSregaddr, &status))
+			return -EIO;
+	}
+
+	/* Check to see if any errors occurred during init */
+	if (status & HS_FFERM) {
+		/* ERROR: During chipset initialization */
+		/* Adapter failed to init, chipset, status reg <status> */
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0438 Adapter failed to init, chipset, "
+				"status reg x%x, "
+				"FW Data: A8 x%x AC x%x\n", status,
+				readl(phba->MBslimaddr + 0xa8),
+				readl(phba->MBslimaddr + 0xac));
+		phba->link_state = LPFC_HBA_ERROR;
+		return -EIO;
+	}
+
+	phba->hba_flag |= HBA_NEEDS_CFG_PORT;
+
+	/* Clear all interrupt enable conditions */
+	writel(0, phba->HCregaddr);
+	readl(phba->HCregaddr); /* flush */
+
+	/* setup host attn register */
+	writel(0xffffffff, phba->HAregaddr);
+	readl(phba->HAregaddr); /* flush */
+	return 0;
+}
+
+/**
+ * lpfc_sli_hbq_count - Get the number of HBQs to be configured
+ *
+ * This function calculates and returns the number of HBQs required to be
+ * configured.
+ **/
+int
+lpfc_sli_hbq_count(void)
+{
+	return ARRAY_SIZE(lpfc_hbq_defs);
+}
+
+/**
+ * lpfc_sli_hbq_entry_count - Calculate total number of hbq entries
+ *
+ * This function adds the number of hbq entries in every HBQ to get
+ * the total number of hbq entries required for the HBA and returns
+ * the total count.
+ **/
+static int
+lpfc_sli_hbq_entry_count(void)
+{
+	int  hbq_count = lpfc_sli_hbq_count();
+	int  count = 0;
+	int  i;
+
+	for (i = 0; i < hbq_count; ++i)
+		count += lpfc_hbq_defs[i]->entry_count;
+	return count;
+}
+
+/**
+ * lpfc_sli_hbq_size - Calculate memory required for all hbq entries
+ *
+ * This function calculates amount of memory required for all hbq entries
+ * to be configured and returns the total memory required.
+ **/
+int
+lpfc_sli_hbq_size(void)
+{
+	return lpfc_sli_hbq_entry_count() * sizeof(struct lpfc_hbq_entry);
+}
+
+/**
+ * lpfc_sli_hbq_setup - configure and initialize HBQs
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called during the SLI initialization to configure
+ * all the HBQs and post buffers to the HBQ. The caller is not
+ * required to hold any locks. This function will return zero if successful
+ * else it will return negative error code.
+ **/
+static int
+lpfc_sli_hbq_setup(struct lpfc_hba *phba)
+{
+	int  hbq_count = lpfc_sli_hbq_count();
+	LPFC_MBOXQ_t *pmb;
+	MAILBOX_t *pmbox;
+	uint32_t hbqno;
+	uint32_t hbq_entry_index;
+
+				/* Get a Mailbox buffer to setup mailbox
+				 * commands for HBA initialization
+				 */
+	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+
+	if (!pmb)
+		return -ENOMEM;
+
+	pmbox = &pmb->u.mb;
+
+	/* Initialize the struct lpfc_sli_hbq structure for each hbq */
+	phba->link_state = LPFC_INIT_MBX_CMDS;
+	phba->hbq_in_use = 1;
+
+	hbq_entry_index = 0;
+	for (hbqno = 0; hbqno < hbq_count; ++hbqno) {
+		phba->hbqs[hbqno].next_hbqPutIdx = 0;
+		phba->hbqs[hbqno].hbqPutIdx      = 0;
+		phba->hbqs[hbqno].local_hbqGetIdx   = 0;
+		phba->hbqs[hbqno].entry_count =
+			lpfc_hbq_defs[hbqno]->entry_count;
+		lpfc_config_hbq(phba, hbqno, lpfc_hbq_defs[hbqno],
+			hbq_entry_index, pmb);
+		hbq_entry_index += phba->hbqs[hbqno].entry_count;
+
+		if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
+			/* Adapter failed to init, mbxCmd <cmd> CFG_RING,
+			   mbxStatus <status>, ring <num> */
+
+			lpfc_printf_log(phba, KERN_ERR,
+					LOG_SLI | LOG_VPORT,
+					"1805 Adapter failed to init. "
+					"Data: x%x x%x x%x\n",
+					pmbox->mbxCommand,
+					pmbox->mbxStatus, hbqno);
+
+			phba->link_state = LPFC_HBA_ERROR;
+			mempool_free(pmb, phba->mbox_mem_pool);
+			return -ENXIO;
+		}
+	}
+	phba->hbq_count = hbq_count;
+
+	mempool_free(pmb, phba->mbox_mem_pool);
+
+	/* Initially populate or replenish the HBQs */
+	for (hbqno = 0; hbqno < hbq_count; ++hbqno)
+		lpfc_sli_hbqbuf_init_hbqs(phba, hbqno);
+	return 0;
+}
+
+/**
+ * lpfc_sli4_rb_setup - Initialize and post RBs to HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called during the SLI initialization to configure
+ * all the HBQs and post buffers to the HBQ. The caller is not
+ * required to hold any locks. This function will return zero if successful
+ * else it will return negative error code.
+ **/
+static int
+lpfc_sli4_rb_setup(struct lpfc_hba *phba)
+{
+	phba->hbq_in_use = 1;
+	/**
+	 * Specific case when the MDS diagnostics is enabled and supported.
+	 * The receive buffer count is truncated to manage the incoming
+	 * traffic.
+	 **/
+	if (phba->cfg_enable_mds_diags && phba->mds_diags_support)
+		phba->hbqs[LPFC_ELS_HBQ].entry_count =
+			lpfc_hbq_defs[LPFC_ELS_HBQ]->entry_count >> 1;
+	else
+		phba->hbqs[LPFC_ELS_HBQ].entry_count =
+			lpfc_hbq_defs[LPFC_ELS_HBQ]->entry_count;
+	phba->hbq_count = 1;
+	lpfc_sli_hbqbuf_init_hbqs(phba, LPFC_ELS_HBQ);
+	/* Initially populate or replenish the HBQs */
+	return 0;
+}
+
+/**
+ * lpfc_sli_config_port - Issue config port mailbox command
+ * @phba: Pointer to HBA context object.
+ * @sli_mode: sli mode - 2/3
+ *
+ * This function is called by the sli initialization code path
+ * to issue config_port mailbox command. This function restarts the
+ * HBA firmware and issues a config_port mailbox command to configure
+ * the SLI interface in the sli mode specified by sli_mode
+ * variable. The caller is not required to hold any locks.
+ * The function returns 0 if successful, else returns negative error
+ * code.
+ **/
+int
+lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
+{
+	LPFC_MBOXQ_t *pmb;
+	uint32_t resetcount = 0, rc = 0, done = 0;
+
+	pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		phba->link_state = LPFC_HBA_ERROR;
+		return -ENOMEM;
+	}
+
+	phba->sli_rev = sli_mode;
+	while (resetcount < 2 && !done) {
+		spin_lock_irq(&phba->hbalock);
+		phba->sli.sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+		spin_unlock_irq(&phba->hbalock);
+		phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+		lpfc_sli_brdrestart(phba);
+		rc = lpfc_sli_chipset_init(phba);
+		if (rc)
+			break;
+
+		spin_lock_irq(&phba->hbalock);
+		phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		spin_unlock_irq(&phba->hbalock);
+		resetcount++;
+
+		/* Call pre CONFIG_PORT mailbox command initialization.  A
+		 * value of 0 means the call was successful.  Any other
+		 * nonzero value is a failure, but if ERESTART is returned,
+		 * the driver may reset the HBA and try again.
+		 */
+		rc = lpfc_config_port_prep(phba);
+		if (rc == -ERESTART) {
+			phba->link_state = LPFC_LINK_UNKNOWN;
+			continue;
+		} else if (rc)
+			break;
+
+		phba->link_state = LPFC_INIT_MBX_CMDS;
+		lpfc_config_port(phba, pmb);
+		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+		phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED |
+					LPFC_SLI3_HBQ_ENABLED |
+					LPFC_SLI3_CRP_ENABLED |
+					LPFC_SLI3_DSS_ENABLED);
+		if (rc != MBX_SUCCESS) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0442 Adapter failed to init, mbxCmd x%x "
+				"CONFIG_PORT, mbxStatus x%x Data: x%x\n",
+				pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus, 0);
+			spin_lock_irq(&phba->hbalock);
+			phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
+			spin_unlock_irq(&phba->hbalock);
+			rc = -ENXIO;
+		} else {
+			/* Allow asynchronous mailbox command to go through */
+			spin_lock_irq(&phba->hbalock);
+			phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+			spin_unlock_irq(&phba->hbalock);
+			done = 1;
+
+			if ((pmb->u.mb.un.varCfgPort.casabt == 1) &&
+			    (pmb->u.mb.un.varCfgPort.gasabt == 0))
+				lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+					"3110 Port did not grant ASABT\n");
+		}
+	}
+	if (!done) {
+		rc = -EINVAL;
+		goto do_prep_failed;
+	}
+	if (pmb->u.mb.un.varCfgPort.sli_mode == 3) {
+		if (!pmb->u.mb.un.varCfgPort.cMA) {
+			rc = -ENXIO;
+			goto do_prep_failed;
+		}
+		if (phba->max_vpi && pmb->u.mb.un.varCfgPort.gmv) {
+			phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
+			phba->max_vpi = pmb->u.mb.un.varCfgPort.max_vpi;
+			phba->max_vports = (phba->max_vpi > phba->max_vports) ?
+				phba->max_vpi : phba->max_vports;
+
+		} else
+			phba->max_vpi = 0;
+		if (pmb->u.mb.un.varCfgPort.gerbm)
+			phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
+		if (pmb->u.mb.un.varCfgPort.gcrp)
+			phba->sli3_options |= LPFC_SLI3_CRP_ENABLED;
+
+		phba->hbq_get = phba->mbox->us.s3_pgp.hbq_get;
+		phba->port_gp = phba->mbox->us.s3_pgp.port;
+
+		if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) {
+			if (pmb->u.mb.un.varCfgPort.gbg == 0) {
+				phba->cfg_enable_bg = 0;
+				phba->sli3_options &= ~LPFC_SLI3_BG_ENABLED;
+				lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+						"0443 Adapter did not grant "
+						"BlockGuard\n");
+			}
+		}
+	} else {
+		phba->hbq_get = NULL;
+		phba->port_gp = phba->mbox->us.s2.port;
+		phba->max_vpi = 0;
+	}
+do_prep_failed:
+	mempool_free(pmb, phba->mbox_mem_pool);
+	return rc;
+}
+
+
+/**
+ * lpfc_sli_hba_setup - SLI initialization function
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is the main SLI initialization function. This function
+ * is called by the HBA initialization code, HBA reset code and HBA
+ * error attention handler code. Caller is not required to hold any
+ * locks. This function issues config_port mailbox command to configure
+ * the SLI, setup iocb rings and HBQ rings. In the end the function
+ * calls the config_port_post function to issue init_link mailbox
+ * command and to start the discovery. The function will return zero
+ * if successful, else it will return negative error code.
+ **/
+int
+lpfc_sli_hba_setup(struct lpfc_hba *phba)
+{
+	uint32_t rc;
+	int  i;
+	int longs;
+
+	/* Enable ISR already does config_port because of config_msi mbx */
+	if (phba->hba_flag & HBA_NEEDS_CFG_PORT) {
+		rc = lpfc_sli_config_port(phba, LPFC_SLI_REV3);
+		if (rc)
+			return -EIO;
+		phba->hba_flag &= ~HBA_NEEDS_CFG_PORT;
+	}
+	phba->fcp_embed_io = 0;	/* SLI4 FC support only */
+
+	/* Enable PCIe device Advanced Error Reporting (AER) if configured */
+	if (phba->cfg_aer_support == 1 && !(phba->hba_flag & HBA_AER_ENABLED)) {
+		rc = pci_enable_pcie_error_reporting(phba->pcidev);
+		if (!rc) {
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"2709 This device supports "
+					"Advanced Error Reporting (AER)\n");
+			spin_lock_irq(&phba->hbalock);
+			phba->hba_flag |= HBA_AER_ENABLED;
+			spin_unlock_irq(&phba->hbalock);
+		} else {
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"2708 This device does not support "
+					"Advanced Error Reporting (AER): %d\n",
+					rc);
+			phba->cfg_aer_support = 0;
+		}
+	}
+
+	if (phba->sli_rev == 3) {
+		phba->iocb_cmd_size = SLI3_IOCB_CMD_SIZE;
+		phba->iocb_rsp_size = SLI3_IOCB_RSP_SIZE;
+	} else {
+		phba->iocb_cmd_size = SLI2_IOCB_CMD_SIZE;
+		phba->iocb_rsp_size = SLI2_IOCB_RSP_SIZE;
+		phba->sli3_options = 0;
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"0444 Firmware in SLI %x mode. Max_vpi %d\n",
+			phba->sli_rev, phba->max_vpi);
+	rc = lpfc_sli_ring_map(phba);
+
+	if (rc)
+		goto lpfc_sli_hba_setup_error;
+
+	/* Initialize VPIs. */
+	if (phba->sli_rev == LPFC_SLI_REV3) {
+		/*
+		 * The VPI bitmask and physical ID array are allocated
+		 * and initialized once only - at driver load.  A port
+		 * reset doesn't need to reinitialize this memory.
+		 */
+		if ((phba->vpi_bmask == NULL) && (phba->vpi_ids == NULL)) {
+			longs = (phba->max_vpi + BITS_PER_LONG) / BITS_PER_LONG;
+			phba->vpi_bmask = kcalloc(longs,
+						  sizeof(unsigned long),
+						  GFP_KERNEL);
+			if (!phba->vpi_bmask) {
+				rc = -ENOMEM;
+				goto lpfc_sli_hba_setup_error;
+			}
+
+			phba->vpi_ids = kcalloc(phba->max_vpi + 1,
+						sizeof(uint16_t),
+						GFP_KERNEL);
+			if (!phba->vpi_ids) {
+				kfree(phba->vpi_bmask);
+				rc = -ENOMEM;
+				goto lpfc_sli_hba_setup_error;
+			}
+			for (i = 0; i < phba->max_vpi; i++)
+				phba->vpi_ids[i] = i;
+		}
+	}
+
+	/* Init HBQs */
+	if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) {
+		rc = lpfc_sli_hbq_setup(phba);
+		if (rc)
+			goto lpfc_sli_hba_setup_error;
+	}
+	spin_lock_irq(&phba->hbalock);
+	phba->sli.sli_flag |= LPFC_PROCESS_LA;
+	spin_unlock_irq(&phba->hbalock);
+
+	rc = lpfc_config_port_post(phba);
+	if (rc)
+		goto lpfc_sli_hba_setup_error;
+
+	return rc;
+
+lpfc_sli_hba_setup_error:
+	phba->link_state = LPFC_HBA_ERROR;
+	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"0445 Firmware initialization failed\n");
+	return rc;
+}
+
+/**
+ * lpfc_sli4_read_fcoe_params - Read fcoe params from conf region
+ * @phba: Pointer to HBA context object.
+ *
+ * This function issue a dump mailbox command to read config region
+ * 23 and parse the records in the region and populate driver
+ * data structure.
+ **/
+static int
+lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_dmabuf *mp;
+	struct lpfc_mqe *mqe;
+	uint32_t data_length;
+	int rc;
+
+	/* Program the default value of vlan_id and fc_map */
+	phba->valid_vlan = 0;
+	phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+	phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+	phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+	mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+
+	mqe = &mboxq->u.mqe;
+	if (lpfc_sli4_dump_cfg_rg23(phba, mboxq)) {
+		rc = -ENOMEM;
+		goto out_free_mboxq;
+	}
+
+	mp = (struct lpfc_dmabuf *)mboxq->ctx_buf;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):2571 Mailbox cmd x%x Status x%x "
+			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+			"CQ: x%x x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			bf_get(lpfc_mqe_command, mqe),
+			bf_get(lpfc_mqe_status, mqe),
+			mqe->un.mb_words[0], mqe->un.mb_words[1],
+			mqe->un.mb_words[2], mqe->un.mb_words[3],
+			mqe->un.mb_words[4], mqe->un.mb_words[5],
+			mqe->un.mb_words[6], mqe->un.mb_words[7],
+			mqe->un.mb_words[8], mqe->un.mb_words[9],
+			mqe->un.mb_words[10], mqe->un.mb_words[11],
+			mqe->un.mb_words[12], mqe->un.mb_words[13],
+			mqe->un.mb_words[14], mqe->un.mb_words[15],
+			mqe->un.mb_words[16], mqe->un.mb_words[50],
+			mboxq->mcqe.word0,
+			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
+			mboxq->mcqe.trailer);
+
+	if (rc) {
+		rc = -EIO;
+		goto out_free_mboxq;
+	}
+	data_length = mqe->un.mb_words[5];
+	if (data_length > DMP_RGN23_SIZE) {
+		rc = -EIO;
+		goto out_free_mboxq;
+	}
+
+	lpfc_parse_fcoe_conf(phba, mp->virt, data_length);
+	rc = 0;
+
+out_free_mboxq:
+	lpfc_mbox_rsrc_cleanup(phba, mboxq, MBOX_THD_UNLOCKED);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_read_rev - Issue READ_REV and collect vpd data
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to the LPFC_MBOXQ_t structure.
+ * @vpd: pointer to the memory to hold resulting port vpd data.
+ * @vpd_size: On input, the number of bytes allocated to @vpd.
+ *	      On output, the number of data bytes in @vpd.
+ *
+ * This routine executes a READ_REV SLI4 mailbox command.  In
+ * addition, this routine gets the port vpd data.
+ *
+ * Return codes
+ * 	0 - successful
+ * 	-ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+		    uint8_t *vpd, uint32_t *vpd_size)
+{
+	int rc = 0;
+	uint32_t dma_size;
+	struct lpfc_dmabuf *dmabuf;
+	struct lpfc_mqe *mqe;
+
+	dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!dmabuf)
+		return -ENOMEM;
+
+	/*
+	 * Get a DMA buffer for the vpd data resulting from the READ_REV
+	 * mailbox command.
+	 */
+	dma_size = *vpd_size;
+	dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev, dma_size,
+					  &dmabuf->phys, GFP_KERNEL);
+	if (!dmabuf->virt) {
+		kfree(dmabuf);
+		return -ENOMEM;
+	}
+
+	/*
+	 * The SLI4 implementation of READ_REV conflicts at word1,
+	 * bits 31:16 and SLI4 adds vpd functionality not present
+	 * in SLI3.  This code corrects the conflicts.
+	 */
+	lpfc_read_rev(phba, mboxq);
+	mqe = &mboxq->u.mqe;
+	mqe->un.read_rev.vpd_paddr_high = putPaddrHigh(dmabuf->phys);
+	mqe->un.read_rev.vpd_paddr_low = putPaddrLow(dmabuf->phys);
+	mqe->un.read_rev.word1 &= 0x0000FFFF;
+	bf_set(lpfc_mbx_rd_rev_vpd, &mqe->un.read_rev, 1);
+	bf_set(lpfc_mbx_rd_rev_avail_len, &mqe->un.read_rev, dma_size);
+
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (rc) {
+		dma_free_coherent(&phba->pcidev->dev, dma_size,
+				  dmabuf->virt, dmabuf->phys);
+		kfree(dmabuf);
+		return -EIO;
+	}
+
+	/*
+	 * The available vpd length cannot be bigger than the
+	 * DMA buffer passed to the port.  Catch the less than
+	 * case and update the caller's size.
+	 */
+	if (mqe->un.read_rev.avail_vpd_len < *vpd_size)
+		*vpd_size = mqe->un.read_rev.avail_vpd_len;
+
+	memcpy(vpd, dmabuf->virt, *vpd_size);
+
+	dma_free_coherent(&phba->pcidev->dev, dma_size,
+			  dmabuf->virt, dmabuf->phys);
+	kfree(dmabuf);
+	return 0;
+}
+
+/**
+ * lpfc_sli4_get_ctl_attr - Retrieve SLI4 device controller attributes
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine retrieves SLI4 device physical port name this PCI function
+ * is attached to.
+ *
+ * Return codes
+ *      0 - successful
+ *      otherwise - failed to retrieve controller attributes
+ **/
+static int
+lpfc_sli4_get_ctl_attr(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mbx_get_cntl_attributes *mbx_cntl_attr;
+	struct lpfc_controller_attribute *cntl_attr;
+	void *virtaddr = NULL;
+	uint32_t alloclen, reqlen;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	int rc;
+
+	mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+
+	/* Send COMMON_GET_CNTL_ATTRIBUTES mbox cmd */
+	reqlen = sizeof(struct lpfc_mbx_get_cntl_attributes);
+	alloclen = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+			LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES, reqlen,
+			LPFC_SLI4_MBX_NEMBED);
+
+	if (alloclen < reqlen) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"3084 Allocated DMA memory size (%d) is "
+				"less than the requested DMA memory size "
+				"(%d)\n", alloclen, reqlen);
+		rc = -ENOMEM;
+		goto out_free_mboxq;
+	}
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	virtaddr = mboxq->sge_array->addr[0];
+	mbx_cntl_attr = (struct lpfc_mbx_get_cntl_attributes *)virtaddr;
+	shdr = &mbx_cntl_attr->cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"3085 Mailbox x%x (x%x/x%x) failed, "
+				"rc:x%x, status:x%x, add_status:x%x\n",
+				bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+				lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+				lpfc_sli_config_mbox_opcode_get(phba, mboxq),
+				rc, shdr_status, shdr_add_status);
+		rc = -ENXIO;
+		goto out_free_mboxq;
+	}
+
+	cntl_attr = &mbx_cntl_attr->cntl_attr;
+	phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_VAL;
+	phba->sli4_hba.lnk_info.lnk_tp =
+		bf_get(lpfc_cntl_attr_lnk_type, cntl_attr);
+	phba->sli4_hba.lnk_info.lnk_no =
+		bf_get(lpfc_cntl_attr_lnk_numb, cntl_attr);
+	phba->sli4_hba.flash_id = bf_get(lpfc_cntl_attr_flash_id, cntl_attr);
+	phba->sli4_hba.asic_rev = bf_get(lpfc_cntl_attr_asic_rev, cntl_attr);
+
+	memset(phba->BIOSVersion, 0, sizeof(phba->BIOSVersion));
+	strlcat(phba->BIOSVersion, (char *)cntl_attr->bios_ver_str,
+		sizeof(phba->BIOSVersion));
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"3086 lnk_type:%d, lnk_numb:%d, bios_ver:%s, "
+			"flash_id: x%02x, asic_rev: x%02x\n",
+			phba->sli4_hba.lnk_info.lnk_tp,
+			phba->sli4_hba.lnk_info.lnk_no,
+			phba->BIOSVersion, phba->sli4_hba.flash_id,
+			phba->sli4_hba.asic_rev);
+out_free_mboxq:
+	if (bf_get(lpfc_mqe_command, &mboxq->u.mqe) == MBX_SLI4_CONFIG)
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	else
+		mempool_free(mboxq, phba->mbox_mem_pool);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_retrieve_pport_name - Retrieve SLI4 device physical port name
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine retrieves SLI4 device physical port name this PCI function
+ * is attached to.
+ *
+ * Return codes
+ *      0 - successful
+ *      otherwise - failed to retrieve physical port name
+ **/
+static int
+lpfc_sli4_retrieve_pport_name(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mbx_get_port_name *get_port_name;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	char cport_name = 0;
+	int rc;
+
+	/* We assume nothing at this point */
+	phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_INVAL;
+	phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_NON;
+
+	mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+	/* obtain link type and link number via READ_CONFIG */
+	phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_INVAL;
+	lpfc_sli4_read_config(phba);
+
+	if (phba->sli4_hba.fawwpn_flag & LPFC_FAWWPN_CONFIG)
+		phba->sli4_hba.fawwpn_flag |= LPFC_FAWWPN_FABRIC;
+
+	if (phba->sli4_hba.lnk_info.lnk_dv == LPFC_LNK_DAT_VAL)
+		goto retrieve_ppname;
+
+	/* obtain link type and link number via COMMON_GET_CNTL_ATTRIBUTES */
+	rc = lpfc_sli4_get_ctl_attr(phba);
+	if (rc)
+		goto out_free_mboxq;
+
+retrieve_ppname:
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+		LPFC_MBOX_OPCODE_GET_PORT_NAME,
+		sizeof(struct lpfc_mbx_get_port_name) -
+		sizeof(struct lpfc_sli4_cfg_mhdr),
+		LPFC_SLI4_MBX_EMBED);
+	get_port_name = &mboxq->u.mqe.un.get_port_name;
+	shdr = (union lpfc_sli4_cfg_shdr *)&get_port_name->header.cfg_shdr;
+	bf_set(lpfc_mbox_hdr_version, &shdr->request, LPFC_OPCODE_VERSION_1);
+	bf_set(lpfc_mbx_get_port_name_lnk_type, &get_port_name->u.request,
+		phba->sli4_hba.lnk_info.lnk_tp);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"3087 Mailbox x%x (x%x/x%x) failed: "
+				"rc:x%x, status:x%x, add_status:x%x\n",
+				bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+				lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+				lpfc_sli_config_mbox_opcode_get(phba, mboxq),
+				rc, shdr_status, shdr_add_status);
+		rc = -ENXIO;
+		goto out_free_mboxq;
+	}
+	switch (phba->sli4_hba.lnk_info.lnk_no) {
+	case LPFC_LINK_NUMBER_0:
+		cport_name = bf_get(lpfc_mbx_get_port_name_name0,
+				&get_port_name->u.response);
+		phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_GET;
+		break;
+	case LPFC_LINK_NUMBER_1:
+		cport_name = bf_get(lpfc_mbx_get_port_name_name1,
+				&get_port_name->u.response);
+		phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_GET;
+		break;
+	case LPFC_LINK_NUMBER_2:
+		cport_name = bf_get(lpfc_mbx_get_port_name_name2,
+				&get_port_name->u.response);
+		phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_GET;
+		break;
+	case LPFC_LINK_NUMBER_3:
+		cport_name = bf_get(lpfc_mbx_get_port_name_name3,
+				&get_port_name->u.response);
+		phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_GET;
+		break;
+	default:
+		break;
+	}
+
+	if (phba->sli4_hba.pport_name_sta == LPFC_SLI4_PPNAME_GET) {
+		phba->Port[0] = cport_name;
+		phba->Port[1] = '\0';
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"3091 SLI get port name: %s\n", phba->Port);
+	}
+
+out_free_mboxq:
+	if (bf_get(lpfc_mqe_command, &mboxq->u.mqe) == MBX_SLI4_CONFIG)
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	else
+		mempool_free(mboxq, phba->mbox_mem_pool);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_arm_cqeq_intr - Arm sli-4 device completion and event queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to explicitly arm the SLI4 device's completion and
+ * event queues
+ **/
+static void
+lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
+{
+	int qidx;
+	struct lpfc_sli4_hba *sli4_hba = &phba->sli4_hba;
+	struct lpfc_sli4_hdw_queue *qp;
+	struct lpfc_queue *eq;
+
+	sli4_hba->sli4_write_cq_db(phba, sli4_hba->mbx_cq, 0, LPFC_QUEUE_REARM);
+	sli4_hba->sli4_write_cq_db(phba, sli4_hba->els_cq, 0, LPFC_QUEUE_REARM);
+	if (sli4_hba->nvmels_cq)
+		sli4_hba->sli4_write_cq_db(phba, sli4_hba->nvmels_cq, 0,
+					   LPFC_QUEUE_REARM);
+
+	if (sli4_hba->hdwq) {
+		/* Loop thru all Hardware Queues */
+		for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) {
+			qp = &sli4_hba->hdwq[qidx];
+			/* ARM the corresponding CQ */
+			sli4_hba->sli4_write_cq_db(phba, qp->io_cq, 0,
+						LPFC_QUEUE_REARM);
+		}
+
+		/* Loop thru all IRQ vectors */
+		for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) {
+			eq = sli4_hba->hba_eq_hdl[qidx].eq;
+			/* ARM the corresponding EQ */
+			sli4_hba->sli4_write_eq_db(phba, eq,
+						   0, LPFC_QUEUE_REARM);
+		}
+	}
+
+	if (phba->nvmet_support) {
+		for (qidx = 0; qidx < phba->cfg_nvmet_mrq; qidx++) {
+			sli4_hba->sli4_write_cq_db(phba,
+				sli4_hba->nvmet_cqset[qidx], 0,
+				LPFC_QUEUE_REARM);
+		}
+	}
+}
+
+/**
+ * lpfc_sli4_get_avail_extnt_rsrc - Get available resource extent count.
+ * @phba: Pointer to HBA context object.
+ * @type: The resource extent type.
+ * @extnt_count: buffer to hold port available extent count.
+ * @extnt_size: buffer to hold element count per extent.
+ *
+ * This function calls the port and retrievs the number of available
+ * extents and their size for a particular extent type.
+ *
+ * Returns: 0 if successful.  Nonzero otherwise.
+ **/
+int
+lpfc_sli4_get_avail_extnt_rsrc(struct lpfc_hba *phba, uint16_t type,
+			       uint16_t *extnt_count, uint16_t *extnt_size)
+{
+	int rc = 0;
+	uint32_t length;
+	uint32_t mbox_tmo;
+	struct lpfc_mbx_get_rsrc_extent_info *rsrc_info;
+	LPFC_MBOXQ_t *mbox;
+
+	*extnt_count = 0;
+	*extnt_size = 0;
+
+	mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	/* Find out how many extents are available for this resource type */
+	length = (sizeof(struct lpfc_mbx_get_rsrc_extent_info) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO,
+			 length, LPFC_SLI4_MBX_EMBED);
+
+	/* Send an extents count of 0 - the GET doesn't use it. */
+	rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, 0, type,
+					LPFC_SLI4_MBX_EMBED);
+	if (unlikely(rc)) {
+		rc = -EIO;
+		goto err_exit;
+	}
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	if (unlikely(rc)) {
+		rc = -EIO;
+		goto err_exit;
+	}
+
+	rsrc_info = &mbox->u.mqe.un.rsrc_extent_info;
+	if (bf_get(lpfc_mbox_hdr_status,
+		   &rsrc_info->header.cfg_shdr.response)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2930 Failed to get resource extents "
+				"Status 0x%x Add'l Status 0x%x\n",
+				bf_get(lpfc_mbox_hdr_status,
+				       &rsrc_info->header.cfg_shdr.response),
+				bf_get(lpfc_mbox_hdr_add_status,
+				       &rsrc_info->header.cfg_shdr.response));
+		rc = -EIO;
+		goto err_exit;
+	}
+
+	*extnt_count = bf_get(lpfc_mbx_get_rsrc_extent_info_cnt,
+			      &rsrc_info->u.rsp);
+	*extnt_size = bf_get(lpfc_mbx_get_rsrc_extent_info_size,
+			     &rsrc_info->u.rsp);
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"3162 Retrieved extents type-%d from port: count:%d, "
+			"size:%d\n", type, *extnt_count, *extnt_size);
+
+err_exit:
+	mempool_free(mbox, phba->mbox_mem_pool);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_chk_avail_extnt_rsrc - Check for available SLI4 resource extents.
+ * @phba: Pointer to HBA context object.
+ * @type: The extent type to check.
+ *
+ * This function reads the current available extents from the port and checks
+ * if the extent count or extent size has changed since the last access.
+ * Callers use this routine post port reset to understand if there is a
+ * extent reprovisioning requirement.
+ *
+ * Returns:
+ *   -Error: error indicates problem.
+ *   1: Extent count or size has changed.
+ *   0: No changes.
+ **/
+static int
+lpfc_sli4_chk_avail_extnt_rsrc(struct lpfc_hba *phba, uint16_t type)
+{
+	uint16_t curr_ext_cnt, rsrc_ext_cnt;
+	uint16_t size_diff, rsrc_ext_size;
+	int rc = 0;
+	struct lpfc_rsrc_blks *rsrc_entry;
+	struct list_head *rsrc_blk_list = NULL;
+
+	size_diff = 0;
+	curr_ext_cnt = 0;
+	rc = lpfc_sli4_get_avail_extnt_rsrc(phba, type,
+					    &rsrc_ext_cnt,
+					    &rsrc_ext_size);
+	if (unlikely(rc))
+		return -EIO;
+
+	switch (type) {
+	case LPFC_RSC_TYPE_FCOE_RPI:
+		rsrc_blk_list = &phba->sli4_hba.lpfc_rpi_blk_list;
+		break;
+	case LPFC_RSC_TYPE_FCOE_VPI:
+		rsrc_blk_list = &phba->lpfc_vpi_blk_list;
+		break;
+	case LPFC_RSC_TYPE_FCOE_XRI:
+		rsrc_blk_list = &phba->sli4_hba.lpfc_xri_blk_list;
+		break;
+	case LPFC_RSC_TYPE_FCOE_VFI:
+		rsrc_blk_list = &phba->sli4_hba.lpfc_vfi_blk_list;
+		break;
+	default:
+		break;
+	}
+
+	list_for_each_entry(rsrc_entry, rsrc_blk_list, list) {
+		curr_ext_cnt++;
+		if (rsrc_entry->rsrc_size != rsrc_ext_size)
+			size_diff++;
+	}
+
+	if (curr_ext_cnt != rsrc_ext_cnt || size_diff != 0)
+		rc = 1;
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_cfg_post_extnts -
+ * @phba: Pointer to HBA context object.
+ * @extnt_cnt: number of available extents.
+ * @type: the extent type (rpi, xri, vfi, vpi).
+ * @emb: buffer to hold either MBX_EMBED or MBX_NEMBED operation.
+ * @mbox: pointer to the caller's allocated mailbox structure.
+ *
+ * This function executes the extents allocation request.  It also
+ * takes care of the amount of memory needed to allocate or get the
+ * allocated extents. It is the caller's responsibility to evaluate
+ * the response.
+ *
+ * Returns:
+ *   -Error:  Error value describes the condition found.
+ *   0: if successful
+ **/
+static int
+lpfc_sli4_cfg_post_extnts(struct lpfc_hba *phba, uint16_t extnt_cnt,
+			  uint16_t type, bool *emb, LPFC_MBOXQ_t *mbox)
+{
+	int rc = 0;
+	uint32_t req_len;
+	uint32_t emb_len;
+	uint32_t alloc_len, mbox_tmo;
+
+	/* Calculate the total requested length of the dma memory */
+	req_len = extnt_cnt * sizeof(uint16_t);
+
+	/*
+	 * Calculate the size of an embedded mailbox.  The uint32_t
+	 * accounts for extents-specific word.
+	 */
+	emb_len = sizeof(MAILBOX_t) - sizeof(struct mbox_header) -
+		sizeof(uint32_t);
+
+	/*
+	 * Presume the allocation and response will fit into an embedded
+	 * mailbox.  If not true, reconfigure to a non-embedded mailbox.
+	 */
+	*emb = LPFC_SLI4_MBX_EMBED;
+	if (req_len > emb_len) {
+		req_len = extnt_cnt * sizeof(uint16_t) +
+			sizeof(union lpfc_sli4_cfg_shdr) +
+			sizeof(uint32_t);
+		*emb = LPFC_SLI4_MBX_NEMBED;
+	}
+
+	alloc_len = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+				     LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT,
+				     req_len, *emb);
+	if (alloc_len < req_len) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"2982 Allocated DMA memory size (x%x) is "
+			"less than the requested DMA memory "
+			"size (x%x)\n", alloc_len, req_len);
+		return -ENOMEM;
+	}
+	rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, extnt_cnt, type, *emb);
+	if (unlikely(rc))
+		return -EIO;
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+
+	if (unlikely(rc))
+		rc = -EIO;
+	return rc;
+}
+
+/**
+ * lpfc_sli4_alloc_extent - Allocate an SLI4 resource extent.
+ * @phba: Pointer to HBA context object.
+ * @type:  The resource extent type to allocate.
+ *
+ * This function allocates the number of elements for the specified
+ * resource type.
+ **/
+static int
+lpfc_sli4_alloc_extent(struct lpfc_hba *phba, uint16_t type)
+{
+	bool emb = false;
+	uint16_t rsrc_id_cnt, rsrc_cnt, rsrc_size;
+	uint16_t rsrc_id, rsrc_start, j, k;
+	uint16_t *ids;
+	int i, rc;
+	unsigned long longs;
+	unsigned long *bmask;
+	struct lpfc_rsrc_blks *rsrc_blks;
+	LPFC_MBOXQ_t *mbox;
+	uint32_t length;
+	struct lpfc_id_range *id_array = NULL;
+	void *virtaddr = NULL;
+	struct lpfc_mbx_nembed_rsrc_extent *n_rsrc;
+	struct lpfc_mbx_alloc_rsrc_extents *rsrc_ext;
+	struct list_head *ext_blk_list;
+
+	rc = lpfc_sli4_get_avail_extnt_rsrc(phba, type,
+					    &rsrc_cnt,
+					    &rsrc_size);
+	if (unlikely(rc))
+		return -EIO;
+
+	if ((rsrc_cnt == 0) || (rsrc_size == 0)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"3009 No available Resource Extents "
+			"for resource type 0x%x: Count: 0x%x, "
+			"Size 0x%x\n", type, rsrc_cnt,
+			rsrc_size);
+		return -ENOMEM;
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_INIT | LOG_SLI,
+			"2903 Post resource extents type-0x%x: "
+			"count:%d, size %d\n", type, rsrc_cnt, rsrc_size);
+
+	mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	rc = lpfc_sli4_cfg_post_extnts(phba, rsrc_cnt, type, &emb, mbox);
+	if (unlikely(rc)) {
+		rc = -EIO;
+		goto err_exit;
+	}
+
+	/*
+	 * Figure out where the response is located.  Then get local pointers
+	 * to the response data.  The port does not guarantee to respond to
+	 * all extents counts request so update the local variable with the
+	 * allocated count from the port.
+	 */
+	if (emb == LPFC_SLI4_MBX_EMBED) {
+		rsrc_ext = &mbox->u.mqe.un.alloc_rsrc_extents;
+		id_array = &rsrc_ext->u.rsp.id[0];
+		rsrc_cnt = bf_get(lpfc_mbx_rsrc_cnt, &rsrc_ext->u.rsp);
+	} else {
+		virtaddr = mbox->sge_array->addr[0];
+		n_rsrc = (struct lpfc_mbx_nembed_rsrc_extent *) virtaddr;
+		rsrc_cnt = bf_get(lpfc_mbx_rsrc_cnt, n_rsrc);
+		id_array = &n_rsrc->id;
+	}
+
+	longs = ((rsrc_cnt * rsrc_size) + BITS_PER_LONG - 1) / BITS_PER_LONG;
+	rsrc_id_cnt = rsrc_cnt * rsrc_size;
+
+	/*
+	 * Based on the resource size and count, correct the base and max
+	 * resource values.
+	 */
+	length = sizeof(struct lpfc_rsrc_blks);
+	switch (type) {
+	case LPFC_RSC_TYPE_FCOE_RPI:
+		phba->sli4_hba.rpi_bmask = kcalloc(longs,
+						   sizeof(unsigned long),
+						   GFP_KERNEL);
+		if (unlikely(!phba->sli4_hba.rpi_bmask)) {
+			rc = -ENOMEM;
+			goto err_exit;
+		}
+		phba->sli4_hba.rpi_ids = kcalloc(rsrc_id_cnt,
+						 sizeof(uint16_t),
+						 GFP_KERNEL);
+		if (unlikely(!phba->sli4_hba.rpi_ids)) {
+			kfree(phba->sli4_hba.rpi_bmask);
+			rc = -ENOMEM;
+			goto err_exit;
+		}
+
+		/*
+		 * The next_rpi was initialized with the maximum available
+		 * count but the port may allocate a smaller number.  Catch
+		 * that case and update the next_rpi.
+		 */
+		phba->sli4_hba.next_rpi = rsrc_id_cnt;
+
+		/* Initialize local ptrs for common extent processing later. */
+		bmask = phba->sli4_hba.rpi_bmask;
+		ids = phba->sli4_hba.rpi_ids;
+		ext_blk_list = &phba->sli4_hba.lpfc_rpi_blk_list;
+		break;
+	case LPFC_RSC_TYPE_FCOE_VPI:
+		phba->vpi_bmask = kcalloc(longs, sizeof(unsigned long),
+					  GFP_KERNEL);
+		if (unlikely(!phba->vpi_bmask)) {
+			rc = -ENOMEM;
+			goto err_exit;
+		}
+		phba->vpi_ids = kcalloc(rsrc_id_cnt, sizeof(uint16_t),
+					 GFP_KERNEL);
+		if (unlikely(!phba->vpi_ids)) {
+			kfree(phba->vpi_bmask);
+			rc = -ENOMEM;
+			goto err_exit;
+		}
+
+		/* Initialize local ptrs for common extent processing later. */
+		bmask = phba->vpi_bmask;
+		ids = phba->vpi_ids;
+		ext_blk_list = &phba->lpfc_vpi_blk_list;
+		break;
+	case LPFC_RSC_TYPE_FCOE_XRI:
+		phba->sli4_hba.xri_bmask = kcalloc(longs,
+						   sizeof(unsigned long),
+						   GFP_KERNEL);
+		if (unlikely(!phba->sli4_hba.xri_bmask)) {
+			rc = -ENOMEM;
+			goto err_exit;
+		}
+		phba->sli4_hba.max_cfg_param.xri_used = 0;
+		phba->sli4_hba.xri_ids = kcalloc(rsrc_id_cnt,
+						 sizeof(uint16_t),
+						 GFP_KERNEL);
+		if (unlikely(!phba->sli4_hba.xri_ids)) {
+			kfree(phba->sli4_hba.xri_bmask);
+			rc = -ENOMEM;
+			goto err_exit;
+		}
+
+		/* Initialize local ptrs for common extent processing later. */
+		bmask = phba->sli4_hba.xri_bmask;
+		ids = phba->sli4_hba.xri_ids;
+		ext_blk_list = &phba->sli4_hba.lpfc_xri_blk_list;
+		break;
+	case LPFC_RSC_TYPE_FCOE_VFI:
+		phba->sli4_hba.vfi_bmask = kcalloc(longs,
+						   sizeof(unsigned long),
+						   GFP_KERNEL);
+		if (unlikely(!phba->sli4_hba.vfi_bmask)) {
+			rc = -ENOMEM;
+			goto err_exit;
+		}
+		phba->sli4_hba.vfi_ids = kcalloc(rsrc_id_cnt,
+						 sizeof(uint16_t),
+						 GFP_KERNEL);
+		if (unlikely(!phba->sli4_hba.vfi_ids)) {
+			kfree(phba->sli4_hba.vfi_bmask);
+			rc = -ENOMEM;
+			goto err_exit;
+		}
+
+		/* Initialize local ptrs for common extent processing later. */
+		bmask = phba->sli4_hba.vfi_bmask;
+		ids = phba->sli4_hba.vfi_ids;
+		ext_blk_list = &phba->sli4_hba.lpfc_vfi_blk_list;
+		break;
+	default:
+		/* Unsupported Opcode.  Fail call. */
+		id_array = NULL;
+		bmask = NULL;
+		ids = NULL;
+		ext_blk_list = NULL;
+		goto err_exit;
+	}
+
+	/*
+	 * Complete initializing the extent configuration with the
+	 * allocated ids assigned to this function.  The bitmask serves
+	 * as an index into the array and manages the available ids.  The
+	 * array just stores the ids communicated to the port via the wqes.
+	 */
+	for (i = 0, j = 0, k = 0; i < rsrc_cnt; i++) {
+		if ((i % 2) == 0)
+			rsrc_id = bf_get(lpfc_mbx_rsrc_id_word4_0,
+					 &id_array[k]);
+		else
+			rsrc_id = bf_get(lpfc_mbx_rsrc_id_word4_1,
+					 &id_array[k]);
+
+		rsrc_blks = kzalloc(length, GFP_KERNEL);
+		if (unlikely(!rsrc_blks)) {
+			rc = -ENOMEM;
+			kfree(bmask);
+			kfree(ids);
+			goto err_exit;
+		}
+		rsrc_blks->rsrc_start = rsrc_id;
+		rsrc_blks->rsrc_size = rsrc_size;
+		list_add_tail(&rsrc_blks->list, ext_blk_list);
+		rsrc_start = rsrc_id;
+		if ((type == LPFC_RSC_TYPE_FCOE_XRI) && (j == 0)) {
+			phba->sli4_hba.io_xri_start = rsrc_start +
+				lpfc_sli4_get_iocb_cnt(phba);
+		}
+
+		while (rsrc_id < (rsrc_start + rsrc_size)) {
+			ids[j] = rsrc_id;
+			rsrc_id++;
+			j++;
+		}
+		/* Entire word processed.  Get next word.*/
+		if ((i % 2) == 1)
+			k++;
+	}
+ err_exit:
+	lpfc_sli4_mbox_cmd_free(phba, mbox);
+	return rc;
+}
+
+
+
+/**
+ * lpfc_sli4_dealloc_extent - Deallocate an SLI4 resource extent.
+ * @phba: Pointer to HBA context object.
+ * @type: the extent's type.
+ *
+ * This function deallocates all extents of a particular resource type.
+ * SLI4 does not allow for deallocating a particular extent range.  It
+ * is the caller's responsibility to release all kernel memory resources.
+ **/
+static int
+lpfc_sli4_dealloc_extent(struct lpfc_hba *phba, uint16_t type)
+{
+	int rc;
+	uint32_t length, mbox_tmo = 0;
+	LPFC_MBOXQ_t *mbox;
+	struct lpfc_mbx_dealloc_rsrc_extents *dealloc_rsrc;
+	struct lpfc_rsrc_blks *rsrc_blk, *rsrc_blk_next;
+
+	mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	/*
+	 * This function sends an embedded mailbox because it only sends the
+	 * the resource type.  All extents of this type are released by the
+	 * port.
+	 */
+	length = (sizeof(struct lpfc_mbx_dealloc_rsrc_extents) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT,
+			 length, LPFC_SLI4_MBX_EMBED);
+
+	/* Send an extents count of 0 - the dealloc doesn't use it. */
+	rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, 0, type,
+					LPFC_SLI4_MBX_EMBED);
+	if (unlikely(rc)) {
+		rc = -EIO;
+		goto out_free_mbox;
+	}
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	if (unlikely(rc)) {
+		rc = -EIO;
+		goto out_free_mbox;
+	}
+
+	dealloc_rsrc = &mbox->u.mqe.un.dealloc_rsrc_extents;
+	if (bf_get(lpfc_mbox_hdr_status,
+		   &dealloc_rsrc->header.cfg_shdr.response)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2919 Failed to release resource extents "
+				"for type %d - Status 0x%x Add'l Status 0x%x. "
+				"Resource memory not released.\n",
+				type,
+				bf_get(lpfc_mbox_hdr_status,
+				    &dealloc_rsrc->header.cfg_shdr.response),
+				bf_get(lpfc_mbox_hdr_add_status,
+				    &dealloc_rsrc->header.cfg_shdr.response));
+		rc = -EIO;
+		goto out_free_mbox;
+	}
+
+	/* Release kernel memory resources for the specific type. */
+	switch (type) {
+	case LPFC_RSC_TYPE_FCOE_VPI:
+		kfree(phba->vpi_bmask);
+		kfree(phba->vpi_ids);
+		bf_set(lpfc_vpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+		list_for_each_entry_safe(rsrc_blk, rsrc_blk_next,
+				    &phba->lpfc_vpi_blk_list, list) {
+			list_del_init(&rsrc_blk->list);
+			kfree(rsrc_blk);
+		}
+		phba->sli4_hba.max_cfg_param.vpi_used = 0;
+		break;
+	case LPFC_RSC_TYPE_FCOE_XRI:
+		kfree(phba->sli4_hba.xri_bmask);
+		kfree(phba->sli4_hba.xri_ids);
+		list_for_each_entry_safe(rsrc_blk, rsrc_blk_next,
+				    &phba->sli4_hba.lpfc_xri_blk_list, list) {
+			list_del_init(&rsrc_blk->list);
+			kfree(rsrc_blk);
+		}
+		break;
+	case LPFC_RSC_TYPE_FCOE_VFI:
+		kfree(phba->sli4_hba.vfi_bmask);
+		kfree(phba->sli4_hba.vfi_ids);
+		bf_set(lpfc_vfi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+		list_for_each_entry_safe(rsrc_blk, rsrc_blk_next,
+				    &phba->sli4_hba.lpfc_vfi_blk_list, list) {
+			list_del_init(&rsrc_blk->list);
+			kfree(rsrc_blk);
+		}
+		break;
+	case LPFC_RSC_TYPE_FCOE_RPI:
+		/* RPI bitmask and physical id array are cleaned up earlier. */
+		list_for_each_entry_safe(rsrc_blk, rsrc_blk_next,
+				    &phba->sli4_hba.lpfc_rpi_blk_list, list) {
+			list_del_init(&rsrc_blk->list);
+			kfree(rsrc_blk);
+		}
+		break;
+	default:
+		break;
+	}
+
+	bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+
+ out_free_mbox:
+	mempool_free(mbox, phba->mbox_mem_pool);
+	return rc;
+}
+
+static void
+lpfc_set_features(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox,
+		  uint32_t feature)
+{
+	uint32_t len;
+	u32 sig_freq = 0;
+
+	len = sizeof(struct lpfc_mbx_set_feature) -
+		sizeof(struct lpfc_sli4_cfg_mhdr);
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_SET_FEATURES, len,
+			 LPFC_SLI4_MBX_EMBED);
+
+	switch (feature) {
+	case LPFC_SET_UE_RECOVERY:
+		bf_set(lpfc_mbx_set_feature_UER,
+		       &mbox->u.mqe.un.set_feature, 1);
+		mbox->u.mqe.un.set_feature.feature = LPFC_SET_UE_RECOVERY;
+		mbox->u.mqe.un.set_feature.param_len = 8;
+		break;
+	case LPFC_SET_MDS_DIAGS:
+		bf_set(lpfc_mbx_set_feature_mds,
+		       &mbox->u.mqe.un.set_feature, 1);
+		bf_set(lpfc_mbx_set_feature_mds_deep_loopbk,
+		       &mbox->u.mqe.un.set_feature, 1);
+		mbox->u.mqe.un.set_feature.feature = LPFC_SET_MDS_DIAGS;
+		mbox->u.mqe.un.set_feature.param_len = 8;
+		break;
+	case LPFC_SET_CGN_SIGNAL:
+		if (phba->cmf_active_mode == LPFC_CFG_OFF)
+			sig_freq = 0;
+		else
+			sig_freq = phba->cgn_sig_freq;
+
+		if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) {
+			bf_set(lpfc_mbx_set_feature_CGN_alarm_freq,
+			       &mbox->u.mqe.un.set_feature, sig_freq);
+			bf_set(lpfc_mbx_set_feature_CGN_warn_freq,
+			       &mbox->u.mqe.un.set_feature, sig_freq);
+		}
+
+		if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ONLY)
+			bf_set(lpfc_mbx_set_feature_CGN_warn_freq,
+			       &mbox->u.mqe.un.set_feature, sig_freq);
+
+		if (phba->cmf_active_mode == LPFC_CFG_OFF ||
+		    phba->cgn_reg_signal == EDC_CG_SIG_NOTSUPPORTED)
+			sig_freq = 0;
+		else
+			sig_freq = lpfc_acqe_cgn_frequency;
+
+		bf_set(lpfc_mbx_set_feature_CGN_acqe_freq,
+		       &mbox->u.mqe.un.set_feature, sig_freq);
+
+		mbox->u.mqe.un.set_feature.feature = LPFC_SET_CGN_SIGNAL;
+		mbox->u.mqe.un.set_feature.param_len = 12;
+		break;
+	case LPFC_SET_DUAL_DUMP:
+		bf_set(lpfc_mbx_set_feature_dd,
+		       &mbox->u.mqe.un.set_feature, LPFC_ENABLE_DUAL_DUMP);
+		bf_set(lpfc_mbx_set_feature_ddquery,
+		       &mbox->u.mqe.un.set_feature, 0);
+		mbox->u.mqe.un.set_feature.feature = LPFC_SET_DUAL_DUMP;
+		mbox->u.mqe.un.set_feature.param_len = 4;
+		break;
+	case LPFC_SET_ENABLE_MI:
+		mbox->u.mqe.un.set_feature.feature = LPFC_SET_ENABLE_MI;
+		mbox->u.mqe.un.set_feature.param_len = 4;
+		bf_set(lpfc_mbx_set_feature_milunq, &mbox->u.mqe.un.set_feature,
+		       phba->pport->cfg_lun_queue_depth);
+		bf_set(lpfc_mbx_set_feature_mi, &mbox->u.mqe.un.set_feature,
+		       phba->sli4_hba.pc_sli4_params.mi_ver);
+		break;
+	case LPFC_SET_LD_SIGNAL:
+		mbox->u.mqe.un.set_feature.feature = LPFC_SET_LD_SIGNAL;
+		mbox->u.mqe.un.set_feature.param_len = 16;
+		bf_set(lpfc_mbx_set_feature_lds_qry,
+		       &mbox->u.mqe.un.set_feature, LPFC_QUERY_LDS_OP);
+		break;
+	case LPFC_SET_ENABLE_CMF:
+		mbox->u.mqe.un.set_feature.feature = LPFC_SET_ENABLE_CMF;
+		mbox->u.mqe.un.set_feature.param_len = 4;
+		bf_set(lpfc_mbx_set_feature_cmf,
+		       &mbox->u.mqe.un.set_feature, 1);
+		break;
+	}
+	return;
+}
+
+/**
+ * lpfc_ras_stop_fwlog: Disable FW logging by the adapter
+ * @phba: Pointer to HBA context object.
+ *
+ * Disable FW logging into host memory on the adapter. To
+ * be done before reading logs from the host memory.
+ **/
+void
+lpfc_ras_stop_fwlog(struct lpfc_hba *phba)
+{
+	struct lpfc_ras_fwlog *ras_fwlog = &phba->ras_fwlog;
+
+	spin_lock_irq(&phba->hbalock);
+	ras_fwlog->state = INACTIVE;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Disable FW logging to host memory */
+	writel(LPFC_CTL_PDEV_CTL_DDL_RAS,
+	       phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET);
+
+	/* Wait 10ms for firmware to stop using DMA buffer */
+	usleep_range(10 * 1000, 20 * 1000);
+}
+
+/**
+ * lpfc_sli4_ras_dma_free - Free memory allocated for FW logging.
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called to free memory allocated for RAS FW logging
+ * support in the driver.
+ **/
+void
+lpfc_sli4_ras_dma_free(struct lpfc_hba *phba)
+{
+	struct lpfc_ras_fwlog *ras_fwlog = &phba->ras_fwlog;
+	struct lpfc_dmabuf *dmabuf, *next;
+
+	if (!list_empty(&ras_fwlog->fwlog_buff_list)) {
+		list_for_each_entry_safe(dmabuf, next,
+				    &ras_fwlog->fwlog_buff_list,
+				    list) {
+			list_del(&dmabuf->list);
+			dma_free_coherent(&phba->pcidev->dev,
+					  LPFC_RAS_MAX_ENTRY_SIZE,
+					  dmabuf->virt, dmabuf->phys);
+			kfree(dmabuf);
+		}
+	}
+
+	if (ras_fwlog->lwpd.virt) {
+		dma_free_coherent(&phba->pcidev->dev,
+				  sizeof(uint32_t) * 2,
+				  ras_fwlog->lwpd.virt,
+				  ras_fwlog->lwpd.phys);
+		ras_fwlog->lwpd.virt = NULL;
+	}
+
+	spin_lock_irq(&phba->hbalock);
+	ras_fwlog->state = INACTIVE;
+	spin_unlock_irq(&phba->hbalock);
+}
+
+/**
+ * lpfc_sli4_ras_dma_alloc: Allocate memory for FW support
+ * @phba: Pointer to HBA context object.
+ * @fwlog_buff_count: Count of buffers to be created.
+ *
+ * This routine DMA memory for Log Write Position Data[LPWD] and buffer
+ * to update FW log is posted to the adapter.
+ * Buffer count is calculated based on module param ras_fwlog_buffsize
+ * Size of each buffer posted to FW is 64K.
+ **/
+
+static int
+lpfc_sli4_ras_dma_alloc(struct lpfc_hba *phba,
+			uint32_t fwlog_buff_count)
+{
+	struct lpfc_ras_fwlog *ras_fwlog = &phba->ras_fwlog;
+	struct lpfc_dmabuf *dmabuf;
+	int rc = 0, i = 0;
+
+	/* Initialize List */
+	INIT_LIST_HEAD(&ras_fwlog->fwlog_buff_list);
+
+	/* Allocate memory for the LWPD */
+	ras_fwlog->lwpd.virt = dma_alloc_coherent(&phba->pcidev->dev,
+					    sizeof(uint32_t) * 2,
+					    &ras_fwlog->lwpd.phys,
+					    GFP_KERNEL);
+	if (!ras_fwlog->lwpd.virt) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"6185 LWPD Memory Alloc Failed\n");
+
+		return -ENOMEM;
+	}
+
+	ras_fwlog->fw_buffcount = fwlog_buff_count;
+	for (i = 0; i < ras_fwlog->fw_buffcount; i++) {
+		dmabuf = kzalloc(sizeof(struct lpfc_dmabuf),
+				 GFP_KERNEL);
+		if (!dmabuf) {
+			rc = -ENOMEM;
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+					"6186 Memory Alloc failed FW logging");
+			goto free_mem;
+		}
+
+		dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+						  LPFC_RAS_MAX_ENTRY_SIZE,
+						  &dmabuf->phys, GFP_KERNEL);
+		if (!dmabuf->virt) {
+			kfree(dmabuf);
+			rc = -ENOMEM;
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+					"6187 DMA Alloc Failed FW logging");
+			goto free_mem;
+		}
+		dmabuf->buffer_tag = i;
+		list_add_tail(&dmabuf->list, &ras_fwlog->fwlog_buff_list);
+	}
+
+free_mem:
+	if (rc)
+		lpfc_sli4_ras_dma_free(phba);
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_ras_mbox_cmpl: Completion handler for RAS MBX command
+ * @phba: pointer to lpfc hba data structure.
+ * @pmb: pointer to the driver internal queue element for mailbox command.
+ *
+ * Completion handler for driver's RAS MBX command to the device.
+ **/
+static void
+lpfc_sli4_ras_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
+{
+	MAILBOX_t *mb;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint32_t shdr_status, shdr_add_status;
+	struct lpfc_ras_fwlog *ras_fwlog = &phba->ras_fwlog;
+
+	mb = &pmb->u.mb;
+
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&pmb->u.mqe.un.ras_fwlog.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+
+	if (mb->mbxStatus != MBX_SUCCESS || shdr_status) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"6188 FW LOG mailbox "
+				"completed with status x%x add_status x%x,"
+				" mbx status x%x\n",
+				shdr_status, shdr_add_status, mb->mbxStatus);
+
+		ras_fwlog->ras_hwsupport = false;
+		goto disable_ras;
+	}
+
+	spin_lock_irq(&phba->hbalock);
+	ras_fwlog->state = ACTIVE;
+	spin_unlock_irq(&phba->hbalock);
+	mempool_free(pmb, phba->mbox_mem_pool);
+
+	return;
+
+disable_ras:
+	/* Free RAS DMA memory */
+	lpfc_sli4_ras_dma_free(phba);
+	mempool_free(pmb, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_ras_fwlog_init: Initialize memory and post RAS MBX command
+ * @phba: pointer to lpfc hba data structure.
+ * @fwlog_level: Logging verbosity level.
+ * @fwlog_enable: Enable/Disable logging.
+ *
+ * Initialize memory and post mailbox command to enable FW logging in host
+ * memory.
+ **/
+int
+lpfc_sli4_ras_fwlog_init(struct lpfc_hba *phba,
+			 uint32_t fwlog_level,
+			 uint32_t fwlog_enable)
+{
+	struct lpfc_ras_fwlog *ras_fwlog = &phba->ras_fwlog;
+	struct lpfc_mbx_set_ras_fwlog *mbx_fwlog = NULL;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	uint32_t len = 0, fwlog_buffsize, fwlog_entry_count;
+	int rc = 0;
+
+	spin_lock_irq(&phba->hbalock);
+	ras_fwlog->state = INACTIVE;
+	spin_unlock_irq(&phba->hbalock);
+
+	fwlog_buffsize = (LPFC_RAS_MIN_BUFF_POST_SIZE *
+			  phba->cfg_ras_fwlog_buffsize);
+	fwlog_entry_count = (fwlog_buffsize/LPFC_RAS_MAX_ENTRY_SIZE);
+
+	/*
+	 * If re-enabling FW logging support use earlier allocated
+	 * DMA buffers while posting MBX command.
+	 **/
+	if (!ras_fwlog->lwpd.virt) {
+		rc = lpfc_sli4_ras_dma_alloc(phba, fwlog_entry_count);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+					"6189 FW Log Memory Allocation Failed");
+			return rc;
+		}
+	}
+
+	/* Setup Mailbox command */
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"6190 RAS MBX Alloc Failed");
+		rc = -ENOMEM;
+		goto mem_free;
+	}
+
+	ras_fwlog->fw_loglevel = fwlog_level;
+	len = (sizeof(struct lpfc_mbx_set_ras_fwlog) -
+		sizeof(struct lpfc_sli4_cfg_mhdr));
+
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_LOWLEVEL,
+			 LPFC_MBOX_OPCODE_SET_DIAG_LOG_OPTION,
+			 len, LPFC_SLI4_MBX_EMBED);
+
+	mbx_fwlog = (struct lpfc_mbx_set_ras_fwlog *)&mbox->u.mqe.un.ras_fwlog;
+	bf_set(lpfc_fwlog_enable, &mbx_fwlog->u.request,
+	       fwlog_enable);
+	bf_set(lpfc_fwlog_loglvl, &mbx_fwlog->u.request,
+	       ras_fwlog->fw_loglevel);
+	bf_set(lpfc_fwlog_buffcnt, &mbx_fwlog->u.request,
+	       ras_fwlog->fw_buffcount);
+	bf_set(lpfc_fwlog_buffsz, &mbx_fwlog->u.request,
+	       LPFC_RAS_MAX_ENTRY_SIZE/SLI4_PAGE_SIZE);
+
+	/* Update DMA buffer address */
+	list_for_each_entry(dmabuf, &ras_fwlog->fwlog_buff_list, list) {
+		memset(dmabuf->virt, 0, LPFC_RAS_MAX_ENTRY_SIZE);
+
+		mbx_fwlog->u.request.buff_fwlog[dmabuf->buffer_tag].addr_lo =
+			putPaddrLow(dmabuf->phys);
+
+		mbx_fwlog->u.request.buff_fwlog[dmabuf->buffer_tag].addr_hi =
+			putPaddrHigh(dmabuf->phys);
+	}
+
+	/* Update LPWD address */
+	mbx_fwlog->u.request.lwpd.addr_lo = putPaddrLow(ras_fwlog->lwpd.phys);
+	mbx_fwlog->u.request.lwpd.addr_hi = putPaddrHigh(ras_fwlog->lwpd.phys);
+
+	spin_lock_irq(&phba->hbalock);
+	ras_fwlog->state = REG_INPROGRESS;
+	spin_unlock_irq(&phba->hbalock);
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_sli4_ras_mbox_cmpl;
+
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"6191 FW-Log Mailbox failed. "
+				"status %d mbxStatus : x%x", rc,
+				bf_get(lpfc_mqe_status, &mbox->u.mqe));
+		mempool_free(mbox, phba->mbox_mem_pool);
+		rc = -EIO;
+		goto mem_free;
+	} else
+		rc = 0;
+mem_free:
+	if (rc)
+		lpfc_sli4_ras_dma_free(phba);
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_ras_setup - Check if RAS supported on the adapter
+ * @phba: Pointer to HBA context object.
+ *
+ * Check if RAS is supported on the adapter and initialize it.
+ **/
+void
+lpfc_sli4_ras_setup(struct lpfc_hba *phba)
+{
+	/* Check RAS FW Log needs to be enabled or not */
+	if (lpfc_check_fwlog_support(phba))
+		return;
+
+	lpfc_sli4_ras_fwlog_init(phba, phba->cfg_ras_fwlog_level,
+				 LPFC_RAS_ENABLE_LOGGING);
+}
+
+/**
+ * lpfc_sli4_alloc_resource_identifiers - Allocate all SLI4 resource extents.
+ * @phba: Pointer to HBA context object.
+ *
+ * This function allocates all SLI4 resource identifiers.
+ **/
+int
+lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba)
+{
+	int i, rc, error = 0;
+	uint16_t count, base;
+	unsigned long longs;
+
+	if (!phba->sli4_hba.rpi_hdrs_in_use)
+		phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.max_rpi;
+	if (phba->sli4_hba.extents_in_use) {
+		/*
+		 * The port supports resource extents. The XRI, VPI, VFI, RPI
+		 * resource extent count must be read and allocated before
+		 * provisioning the resource id arrays.
+		 */
+		if (bf_get(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags) ==
+		    LPFC_IDX_RSRC_RDY) {
+			/*
+			 * Extent-based resources are set - the driver could
+			 * be in a port reset. Figure out if any corrective
+			 * actions need to be taken.
+			 */
+			rc = lpfc_sli4_chk_avail_extnt_rsrc(phba,
+						 LPFC_RSC_TYPE_FCOE_VFI);
+			if (rc != 0)
+				error++;
+			rc = lpfc_sli4_chk_avail_extnt_rsrc(phba,
+						 LPFC_RSC_TYPE_FCOE_VPI);
+			if (rc != 0)
+				error++;
+			rc = lpfc_sli4_chk_avail_extnt_rsrc(phba,
+						 LPFC_RSC_TYPE_FCOE_XRI);
+			if (rc != 0)
+				error++;
+			rc = lpfc_sli4_chk_avail_extnt_rsrc(phba,
+						 LPFC_RSC_TYPE_FCOE_RPI);
+			if (rc != 0)
+				error++;
+
+			/*
+			 * It's possible that the number of resources
+			 * provided to this port instance changed between
+			 * resets.  Detect this condition and reallocate
+			 * resources.  Otherwise, there is no action.
+			 */
+			if (error) {
+				lpfc_printf_log(phba, KERN_INFO,
+						LOG_MBOX | LOG_INIT,
+						"2931 Detected extent resource "
+						"change.  Reallocating all "
+						"extents.\n");
+				rc = lpfc_sli4_dealloc_extent(phba,
+						 LPFC_RSC_TYPE_FCOE_VFI);
+				rc = lpfc_sli4_dealloc_extent(phba,
+						 LPFC_RSC_TYPE_FCOE_VPI);
+				rc = lpfc_sli4_dealloc_extent(phba,
+						 LPFC_RSC_TYPE_FCOE_XRI);
+				rc = lpfc_sli4_dealloc_extent(phba,
+						 LPFC_RSC_TYPE_FCOE_RPI);
+			} else
+				return 0;
+		}
+
+		rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_VFI);
+		if (unlikely(rc))
+			goto err_exit;
+
+		rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_VPI);
+		if (unlikely(rc))
+			goto err_exit;
+
+		rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_RPI);
+		if (unlikely(rc))
+			goto err_exit;
+
+		rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_XRI);
+		if (unlikely(rc))
+			goto err_exit;
+		bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags,
+		       LPFC_IDX_RSRC_RDY);
+		return rc;
+	} else {
+		/*
+		 * The port does not support resource extents.  The XRI, VPI,
+		 * VFI, RPI resource ids were determined from READ_CONFIG.
+		 * Just allocate the bitmasks and provision the resource id
+		 * arrays.  If a port reset is active, the resources don't
+		 * need any action - just exit.
+		 */
+		if (bf_get(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags) ==
+		    LPFC_IDX_RSRC_RDY) {
+			lpfc_sli4_dealloc_resource_identifiers(phba);
+			lpfc_sli4_remove_rpis(phba);
+		}
+		/* RPIs. */
+		count = phba->sli4_hba.max_cfg_param.max_rpi;
+		if (count <= 0) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"3279 Invalid provisioning of "
+					"rpi:%d\n", count);
+			rc = -EINVAL;
+			goto err_exit;
+		}
+		base = phba->sli4_hba.max_cfg_param.rpi_base;
+		longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG;
+		phba->sli4_hba.rpi_bmask = kcalloc(longs,
+						   sizeof(unsigned long),
+						   GFP_KERNEL);
+		if (unlikely(!phba->sli4_hba.rpi_bmask)) {
+			rc = -ENOMEM;
+			goto err_exit;
+		}
+		phba->sli4_hba.rpi_ids = kcalloc(count, sizeof(uint16_t),
+						 GFP_KERNEL);
+		if (unlikely(!phba->sli4_hba.rpi_ids)) {
+			rc = -ENOMEM;
+			goto free_rpi_bmask;
+		}
+
+		for (i = 0; i < count; i++)
+			phba->sli4_hba.rpi_ids[i] = base + i;
+
+		/* VPIs. */
+		count = phba->sli4_hba.max_cfg_param.max_vpi;
+		if (count <= 0) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"3280 Invalid provisioning of "
+					"vpi:%d\n", count);
+			rc = -EINVAL;
+			goto free_rpi_ids;
+		}
+		base = phba->sli4_hba.max_cfg_param.vpi_base;
+		longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG;
+		phba->vpi_bmask = kcalloc(longs, sizeof(unsigned long),
+					  GFP_KERNEL);
+		if (unlikely(!phba->vpi_bmask)) {
+			rc = -ENOMEM;
+			goto free_rpi_ids;
+		}
+		phba->vpi_ids = kcalloc(count, sizeof(uint16_t),
+					GFP_KERNEL);
+		if (unlikely(!phba->vpi_ids)) {
+			rc = -ENOMEM;
+			goto free_vpi_bmask;
+		}
+
+		for (i = 0; i < count; i++)
+			phba->vpi_ids[i] = base + i;
+
+		/* XRIs. */
+		count = phba->sli4_hba.max_cfg_param.max_xri;
+		if (count <= 0) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"3281 Invalid provisioning of "
+					"xri:%d\n", count);
+			rc = -EINVAL;
+			goto free_vpi_ids;
+		}
+		base = phba->sli4_hba.max_cfg_param.xri_base;
+		longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG;
+		phba->sli4_hba.xri_bmask = kcalloc(longs,
+						   sizeof(unsigned long),
+						   GFP_KERNEL);
+		if (unlikely(!phba->sli4_hba.xri_bmask)) {
+			rc = -ENOMEM;
+			goto free_vpi_ids;
+		}
+		phba->sli4_hba.max_cfg_param.xri_used = 0;
+		phba->sli4_hba.xri_ids = kcalloc(count, sizeof(uint16_t),
+						 GFP_KERNEL);
+		if (unlikely(!phba->sli4_hba.xri_ids)) {
+			rc = -ENOMEM;
+			goto free_xri_bmask;
+		}
+
+		for (i = 0; i < count; i++)
+			phba->sli4_hba.xri_ids[i] = base + i;
+
+		/* VFIs. */
+		count = phba->sli4_hba.max_cfg_param.max_vfi;
+		if (count <= 0) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"3282 Invalid provisioning of "
+					"vfi:%d\n", count);
+			rc = -EINVAL;
+			goto free_xri_ids;
+		}
+		base = phba->sli4_hba.max_cfg_param.vfi_base;
+		longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG;
+		phba->sli4_hba.vfi_bmask = kcalloc(longs,
+						   sizeof(unsigned long),
+						   GFP_KERNEL);
+		if (unlikely(!phba->sli4_hba.vfi_bmask)) {
+			rc = -ENOMEM;
+			goto free_xri_ids;
+		}
+		phba->sli4_hba.vfi_ids = kcalloc(count, sizeof(uint16_t),
+						 GFP_KERNEL);
+		if (unlikely(!phba->sli4_hba.vfi_ids)) {
+			rc = -ENOMEM;
+			goto free_vfi_bmask;
+		}
+
+		for (i = 0; i < count; i++)
+			phba->sli4_hba.vfi_ids[i] = base + i;
+
+		/*
+		 * Mark all resources ready.  An HBA reset doesn't need
+		 * to reset the initialization.
+		 */
+		bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags,
+		       LPFC_IDX_RSRC_RDY);
+		return 0;
+	}
+
+ free_vfi_bmask:
+	kfree(phba->sli4_hba.vfi_bmask);
+	phba->sli4_hba.vfi_bmask = NULL;
+ free_xri_ids:
+	kfree(phba->sli4_hba.xri_ids);
+	phba->sli4_hba.xri_ids = NULL;
+ free_xri_bmask:
+	kfree(phba->sli4_hba.xri_bmask);
+	phba->sli4_hba.xri_bmask = NULL;
+ free_vpi_ids:
+	kfree(phba->vpi_ids);
+	phba->vpi_ids = NULL;
+ free_vpi_bmask:
+	kfree(phba->vpi_bmask);
+	phba->vpi_bmask = NULL;
+ free_rpi_ids:
+	kfree(phba->sli4_hba.rpi_ids);
+	phba->sli4_hba.rpi_ids = NULL;
+ free_rpi_bmask:
+	kfree(phba->sli4_hba.rpi_bmask);
+	phba->sli4_hba.rpi_bmask = NULL;
+ err_exit:
+	return rc;
+}
+
+/**
+ * lpfc_sli4_dealloc_resource_identifiers - Deallocate all SLI4 resource extents.
+ * @phba: Pointer to HBA context object.
+ *
+ * This function allocates the number of elements for the specified
+ * resource type.
+ **/
+int
+lpfc_sli4_dealloc_resource_identifiers(struct lpfc_hba *phba)
+{
+	if (phba->sli4_hba.extents_in_use) {
+		lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_VPI);
+		lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_RPI);
+		lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_XRI);
+		lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_VFI);
+	} else {
+		kfree(phba->vpi_bmask);
+		phba->sli4_hba.max_cfg_param.vpi_used = 0;
+		kfree(phba->vpi_ids);
+		bf_set(lpfc_vpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+		kfree(phba->sli4_hba.xri_bmask);
+		kfree(phba->sli4_hba.xri_ids);
+		kfree(phba->sli4_hba.vfi_bmask);
+		kfree(phba->sli4_hba.vfi_ids);
+		bf_set(lpfc_vfi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+		bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+	}
+
+	return 0;
+}
+
+/**
+ * lpfc_sli4_get_allocated_extnts - Get the port's allocated extents.
+ * @phba: Pointer to HBA context object.
+ * @type: The resource extent type.
+ * @extnt_cnt: buffer to hold port extent count response
+ * @extnt_size: buffer to hold port extent size response.
+ *
+ * This function calls the port to read the host allocated extents
+ * for a particular type.
+ **/
+int
+lpfc_sli4_get_allocated_extnts(struct lpfc_hba *phba, uint16_t type,
+			       uint16_t *extnt_cnt, uint16_t *extnt_size)
+{
+	bool emb;
+	int rc = 0;
+	uint16_t curr_blks = 0;
+	uint32_t req_len, emb_len;
+	uint32_t alloc_len, mbox_tmo;
+	struct list_head *blk_list_head;
+	struct lpfc_rsrc_blks *rsrc_blk;
+	LPFC_MBOXQ_t *mbox;
+	void *virtaddr = NULL;
+	struct lpfc_mbx_nembed_rsrc_extent *n_rsrc;
+	struct lpfc_mbx_alloc_rsrc_extents *rsrc_ext;
+	union  lpfc_sli4_cfg_shdr *shdr;
+
+	switch (type) {
+	case LPFC_RSC_TYPE_FCOE_VPI:
+		blk_list_head = &phba->lpfc_vpi_blk_list;
+		break;
+	case LPFC_RSC_TYPE_FCOE_XRI:
+		blk_list_head = &phba->sli4_hba.lpfc_xri_blk_list;
+		break;
+	case LPFC_RSC_TYPE_FCOE_VFI:
+		blk_list_head = &phba->sli4_hba.lpfc_vfi_blk_list;
+		break;
+	case LPFC_RSC_TYPE_FCOE_RPI:
+		blk_list_head = &phba->sli4_hba.lpfc_rpi_blk_list;
+		break;
+	default:
+		return -EIO;
+	}
+
+	/* Count the number of extents currently allocatd for this type. */
+	list_for_each_entry(rsrc_blk, blk_list_head, list) {
+		if (curr_blks == 0) {
+			/*
+			 * The GET_ALLOCATED mailbox does not return the size,
+			 * just the count.  The size should be just the size
+			 * stored in the current allocated block and all sizes
+			 * for an extent type are the same so set the return
+			 * value now.
+			 */
+			*extnt_size = rsrc_blk->rsrc_size;
+		}
+		curr_blks++;
+	}
+
+	/*
+	 * Calculate the size of an embedded mailbox.  The uint32_t
+	 * accounts for extents-specific word.
+	 */
+	emb_len = sizeof(MAILBOX_t) - sizeof(struct mbox_header) -
+		sizeof(uint32_t);
+
+	/*
+	 * Presume the allocation and response will fit into an embedded
+	 * mailbox.  If not true, reconfigure to a non-embedded mailbox.
+	 */
+	emb = LPFC_SLI4_MBX_EMBED;
+	req_len = emb_len;
+	if (req_len > emb_len) {
+		req_len = curr_blks * sizeof(uint16_t) +
+			sizeof(union lpfc_sli4_cfg_shdr) +
+			sizeof(uint32_t);
+		emb = LPFC_SLI4_MBX_NEMBED;
+	}
+
+	mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	memset(mbox, 0, sizeof(LPFC_MBOXQ_t));
+
+	alloc_len = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+				     LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT,
+				     req_len, emb);
+	if (alloc_len < req_len) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"2983 Allocated DMA memory size (x%x) is "
+			"less than the requested DMA memory "
+			"size (x%x)\n", alloc_len, req_len);
+		rc = -ENOMEM;
+		goto err_exit;
+	}
+	rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, curr_blks, type, emb);
+	if (unlikely(rc)) {
+		rc = -EIO;
+		goto err_exit;
+	}
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+
+	if (unlikely(rc)) {
+		rc = -EIO;
+		goto err_exit;
+	}
+
+	/*
+	 * Figure out where the response is located.  Then get local pointers
+	 * to the response data.  The port does not guarantee to respond to
+	 * all extents counts request so update the local variable with the
+	 * allocated count from the port.
+	 */
+	if (emb == LPFC_SLI4_MBX_EMBED) {
+		rsrc_ext = &mbox->u.mqe.un.alloc_rsrc_extents;
+		shdr = &rsrc_ext->header.cfg_shdr;
+		*extnt_cnt = bf_get(lpfc_mbx_rsrc_cnt, &rsrc_ext->u.rsp);
+	} else {
+		virtaddr = mbox->sge_array->addr[0];
+		n_rsrc = (struct lpfc_mbx_nembed_rsrc_extent *) virtaddr;
+		shdr = &n_rsrc->cfg_shdr;
+		*extnt_cnt = bf_get(lpfc_mbx_rsrc_cnt, n_rsrc);
+	}
+
+	if (bf_get(lpfc_mbox_hdr_status, &shdr->response)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"2984 Failed to read allocated resources "
+			"for type %d - Status 0x%x Add'l Status 0x%x.\n",
+			type,
+			bf_get(lpfc_mbox_hdr_status, &shdr->response),
+			bf_get(lpfc_mbox_hdr_add_status, &shdr->response));
+		rc = -EIO;
+		goto err_exit;
+	}
+ err_exit:
+	lpfc_sli4_mbox_cmd_free(phba, mbox);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_repost_sgl_list - Repost the buffers sgl pages as block
+ * @phba: pointer to lpfc hba data structure.
+ * @sgl_list: linked link of sgl buffers to post
+ * @cnt: number of linked list buffers
+ *
+ * This routine walks the list of buffers that have been allocated and
+ * repost them to the port by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. It attempts to construct blocks
+ * of buffer sgls which contains contiguous xris and uses the non-embedded
+ * SGL block post mailbox commands to post them to the port. For single
+ * buffer sgl with non-contiguous xri, if any, it shall use embedded SGL post
+ * mailbox command for posting.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+static int
+lpfc_sli4_repost_sgl_list(struct lpfc_hba *phba,
+			  struct list_head *sgl_list, int cnt)
+{
+	struct lpfc_sglq *sglq_entry = NULL;
+	struct lpfc_sglq *sglq_entry_next = NULL;
+	struct lpfc_sglq *sglq_entry_first = NULL;
+	int status, total_cnt;
+	int post_cnt = 0, num_posted = 0, block_cnt = 0;
+	int last_xritag = NO_XRI;
+	LIST_HEAD(prep_sgl_list);
+	LIST_HEAD(blck_sgl_list);
+	LIST_HEAD(allc_sgl_list);
+	LIST_HEAD(post_sgl_list);
+	LIST_HEAD(free_sgl_list);
+
+	spin_lock_irq(&phba->hbalock);
+	spin_lock(&phba->sli4_hba.sgl_list_lock);
+	list_splice_init(sgl_list, &allc_sgl_list);
+	spin_unlock(&phba->sli4_hba.sgl_list_lock);
+	spin_unlock_irq(&phba->hbalock);
+
+	total_cnt = cnt;
+	list_for_each_entry_safe(sglq_entry, sglq_entry_next,
+				 &allc_sgl_list, list) {
+		list_del_init(&sglq_entry->list);
+		block_cnt++;
+		if ((last_xritag != NO_XRI) &&
+		    (sglq_entry->sli4_xritag != last_xritag + 1)) {
+			/* a hole in xri block, form a sgl posting block */
+			list_splice_init(&prep_sgl_list, &blck_sgl_list);
+			post_cnt = block_cnt - 1;
+			/* prepare list for next posting block */
+			list_add_tail(&sglq_entry->list, &prep_sgl_list);
+			block_cnt = 1;
+		} else {
+			/* prepare list for next posting block */
+			list_add_tail(&sglq_entry->list, &prep_sgl_list);
+			/* enough sgls for non-embed sgl mbox command */
+			if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+				list_splice_init(&prep_sgl_list,
+						 &blck_sgl_list);
+				post_cnt = block_cnt;
+				block_cnt = 0;
+			}
+		}
+		num_posted++;
+
+		/* keep track of last sgl's xritag */
+		last_xritag = sglq_entry->sli4_xritag;
+
+		/* end of repost sgl list condition for buffers */
+		if (num_posted == total_cnt) {
+			if (post_cnt == 0) {
+				list_splice_init(&prep_sgl_list,
+						 &blck_sgl_list);
+				post_cnt = block_cnt;
+			} else if (block_cnt == 1) {
+				status = lpfc_sli4_post_sgl(phba,
+						sglq_entry->phys, 0,
+						sglq_entry->sli4_xritag);
+				if (!status) {
+					/* successful, put sgl to posted list */
+					list_add_tail(&sglq_entry->list,
+						      &post_sgl_list);
+				} else {
+					/* Failure, put sgl to free list */
+					lpfc_printf_log(phba, KERN_WARNING,
+						LOG_SLI,
+						"3159 Failed to post "
+						"sgl, xritag:x%x\n",
+						sglq_entry->sli4_xritag);
+					list_add_tail(&sglq_entry->list,
+						      &free_sgl_list);
+					total_cnt--;
+				}
+			}
+		}
+
+		/* continue until a nembed page worth of sgls */
+		if (post_cnt == 0)
+			continue;
+
+		/* post the buffer list sgls as a block */
+		status = lpfc_sli4_post_sgl_list(phba, &blck_sgl_list,
+						 post_cnt);
+
+		if (!status) {
+			/* success, put sgl list to posted sgl list */
+			list_splice_init(&blck_sgl_list, &post_sgl_list);
+		} else {
+			/* Failure, put sgl list to free sgl list */
+			sglq_entry_first = list_first_entry(&blck_sgl_list,
+							    struct lpfc_sglq,
+							    list);
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"3160 Failed to post sgl-list, "
+					"xritag:x%x-x%x\n",
+					sglq_entry_first->sli4_xritag,
+					(sglq_entry_first->sli4_xritag +
+					 post_cnt - 1));
+			list_splice_init(&blck_sgl_list, &free_sgl_list);
+			total_cnt -= post_cnt;
+		}
+
+		/* don't reset xirtag due to hole in xri block */
+		if (block_cnt == 0)
+			last_xritag = NO_XRI;
+
+		/* reset sgl post count for next round of posting */
+		post_cnt = 0;
+	}
+
+	/* free the sgls failed to post */
+	lpfc_free_sgl_list(phba, &free_sgl_list);
+
+	/* push sgls posted to the available list */
+	if (!list_empty(&post_sgl_list)) {
+		spin_lock_irq(&phba->hbalock);
+		spin_lock(&phba->sli4_hba.sgl_list_lock);
+		list_splice_init(&post_sgl_list, sgl_list);
+		spin_unlock(&phba->sli4_hba.sgl_list_lock);
+		spin_unlock_irq(&phba->hbalock);
+	} else {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"3161 Failure to post sgl to port,status %x "
+				"blkcnt %d totalcnt %d postcnt %d\n",
+				status, block_cnt, total_cnt, post_cnt);
+		return -EIO;
+	}
+
+	/* return the number of XRIs actually posted */
+	return total_cnt;
+}
+
+/**
+ * lpfc_sli4_repost_io_sgl_list - Repost all the allocated nvme buffer sgls
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine walks the list of nvme buffers that have been allocated and
+ * repost them to the port by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
+ * is responsible for moving all nvme buffers on the lpfc_abts_nvme_sgl_list
+ * to the lpfc_io_buf_list. If the repost fails, reject all nvme buffers.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+static int
+lpfc_sli4_repost_io_sgl_list(struct lpfc_hba *phba)
+{
+	LIST_HEAD(post_nblist);
+	int num_posted, rc = 0;
+
+	/* get all NVME buffers need to repost to a local list */
+	lpfc_io_buf_flush(phba, &post_nblist);
+
+	/* post the list of nvme buffer sgls to port if available */
+	if (!list_empty(&post_nblist)) {
+		num_posted = lpfc_sli4_post_io_sgl_list(
+			phba, &post_nblist, phba->sli4_hba.io_xri_cnt);
+		/* failed to post any nvme buffer, return error */
+		if (num_posted == 0)
+			rc = -EIO;
+	}
+	return rc;
+}
+
+static void
+lpfc_set_host_data(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
+{
+	uint32_t len;
+
+	len = sizeof(struct lpfc_mbx_set_host_data) -
+		sizeof(struct lpfc_sli4_cfg_mhdr);
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_SET_HOST_DATA, len,
+			 LPFC_SLI4_MBX_EMBED);
+
+	mbox->u.mqe.un.set_host_data.param_id = LPFC_SET_HOST_OS_DRIVER_VERSION;
+	mbox->u.mqe.un.set_host_data.param_len =
+					LPFC_HOST_OS_DRIVER_VERSION_SIZE;
+	snprintf(mbox->u.mqe.un.set_host_data.un.data,
+		 LPFC_HOST_OS_DRIVER_VERSION_SIZE,
+		 "Linux %s v"LPFC_DRIVER_VERSION,
+		 (phba->hba_flag & HBA_FCOE_MODE) ? "FCoE" : "FC");
+}
+
+int
+lpfc_post_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+		    struct lpfc_queue *drq, int count, int idx)
+{
+	int rc, i;
+	struct lpfc_rqe hrqe;
+	struct lpfc_rqe drqe;
+	struct lpfc_rqb *rqbp;
+	unsigned long flags;
+	struct rqb_dmabuf *rqb_buffer;
+	LIST_HEAD(rqb_buf_list);
+
+	rqbp = hrq->rqbp;
+	for (i = 0; i < count; i++) {
+		spin_lock_irqsave(&phba->hbalock, flags);
+		/* IF RQ is already full, don't bother */
+		if (rqbp->buffer_count + i >= rqbp->entry_count - 1) {
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			break;
+		}
+		spin_unlock_irqrestore(&phba->hbalock, flags);
+
+		rqb_buffer = rqbp->rqb_alloc_buffer(phba);
+		if (!rqb_buffer)
+			break;
+		rqb_buffer->hrq = hrq;
+		rqb_buffer->drq = drq;
+		rqb_buffer->idx = idx;
+		list_add_tail(&rqb_buffer->hbuf.list, &rqb_buf_list);
+	}
+
+	spin_lock_irqsave(&phba->hbalock, flags);
+	while (!list_empty(&rqb_buf_list)) {
+		list_remove_head(&rqb_buf_list, rqb_buffer, struct rqb_dmabuf,
+				 hbuf.list);
+
+		hrqe.address_lo = putPaddrLow(rqb_buffer->hbuf.phys);
+		hrqe.address_hi = putPaddrHigh(rqb_buffer->hbuf.phys);
+		drqe.address_lo = putPaddrLow(rqb_buffer->dbuf.phys);
+		drqe.address_hi = putPaddrHigh(rqb_buffer->dbuf.phys);
+		rc = lpfc_sli4_rq_put(hrq, drq, &hrqe, &drqe);
+		if (rc < 0) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"6421 Cannot post to HRQ %d: %x %x %x "
+					"DRQ %x %x\n",
+					hrq->queue_id,
+					hrq->host_index,
+					hrq->hba_index,
+					hrq->entry_count,
+					drq->host_index,
+					drq->hba_index);
+			rqbp->rqb_free_buffer(phba, rqb_buffer);
+		} else {
+			list_add_tail(&rqb_buffer->hbuf.list,
+				      &rqbp->rqb_buffer_list);
+			rqbp->buffer_count++;
+		}
+	}
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+	return 1;
+}
+
+static void
+lpfc_mbx_cmpl_read_lds_params(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
+{
+	union lpfc_sli4_cfg_shdr *shdr;
+	u32 shdr_status, shdr_add_status;
+
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&pmb->u.mqe.un.sli4_config.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || pmb->u.mb.mbxStatus) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_LDS_EVENT | LOG_MBOX,
+				"4622 SET_FEATURE (x%x) mbox failed, "
+				"status x%x add_status x%x, mbx status x%x\n",
+				LPFC_SET_LD_SIGNAL, shdr_status,
+				shdr_add_status, pmb->u.mb.mbxStatus);
+		phba->degrade_activate_threshold = 0;
+		phba->degrade_deactivate_threshold = 0;
+		phba->fec_degrade_interval = 0;
+		goto out;
+	}
+
+	phba->degrade_activate_threshold = pmb->u.mqe.un.set_feature.word7;
+	phba->degrade_deactivate_threshold = pmb->u.mqe.un.set_feature.word8;
+	phba->fec_degrade_interval = pmb->u.mqe.un.set_feature.word10;
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_LDS_EVENT,
+			"4624 Success: da x%x dd x%x interval x%x\n",
+			phba->degrade_activate_threshold,
+			phba->degrade_deactivate_threshold,
+			phba->fec_degrade_interval);
+out:
+	mempool_free(pmb, phba->mbox_mem_pool);
+}
+
+int
+lpfc_read_lds_params(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	int rc;
+
+	mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+
+	lpfc_set_features(phba, mboxq, LPFC_SET_LD_SIGNAL);
+	mboxq->vport = phba->pport;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_read_lds_params;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		mempool_free(mboxq, phba->mbox_mem_pool);
+		return -EIO;
+	}
+	return 0;
+}
+
+static void
+lpfc_mbx_cmpl_cgn_set_ftrs(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
+{
+	struct lpfc_vport *vport = pmb->vport;
+	union lpfc_sli4_cfg_shdr *shdr;
+	u32 shdr_status, shdr_add_status;
+	u32 sig, acqe;
+
+	/* Two outcomes. (1) Set featurs was successul and EDC negotiation
+	 * is done. (2) Mailbox failed and send FPIN support only.
+	 */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&pmb->u.mqe.un.sli4_config.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || pmb->u.mb.mbxStatus) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_CGN_MGMT,
+				"2516 CGN SET_FEATURE mbox failed with "
+				"status x%x add_status x%x, mbx status x%x "
+				"Reset Congestion to FPINs only\n",
+				shdr_status, shdr_add_status,
+				pmb->u.mb.mbxStatus);
+		/* If there is a mbox error, move on to RDF */
+		phba->cgn_reg_signal = EDC_CG_SIG_NOTSUPPORTED;
+		phba->cgn_reg_fpin = LPFC_CGN_FPIN_WARN | LPFC_CGN_FPIN_ALARM;
+		goto out;
+	}
+
+	/* Zero out Congestion Signal ACQE counter */
+	phba->cgn_acqe_cnt = 0;
+
+	acqe = bf_get(lpfc_mbx_set_feature_CGN_acqe_freq,
+		      &pmb->u.mqe.un.set_feature);
+	sig = bf_get(lpfc_mbx_set_feature_CGN_warn_freq,
+		     &pmb->u.mqe.un.set_feature);
+	lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
+			"4620 SET_FEATURES Success: Freq: %ds %dms "
+			" Reg: x%x x%x\n", acqe, sig,
+			phba->cgn_reg_signal, phba->cgn_reg_fpin);
+out:
+	mempool_free(pmb, phba->mbox_mem_pool);
+
+	/* Register for FPIN events from the fabric now that the
+	 * EDC common_set_features has completed.
+	 */
+	lpfc_issue_els_rdf(vport, 0);
+}
+
+int
+lpfc_config_cgn_signal(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	u32 rc;
+
+	mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		goto out_rdf;
+
+	lpfc_set_features(phba, mboxq, LPFC_SET_CGN_SIGNAL);
+	mboxq->vport = phba->pport;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_cgn_set_ftrs;
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
+			"4621 SET_FEATURES: FREQ sig x%x acqe x%x: "
+			"Reg: x%x x%x\n",
+			phba->cgn_sig_freq, lpfc_acqe_cgn_frequency,
+			phba->cgn_reg_signal, phba->cgn_reg_fpin);
+
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED)
+		goto out;
+	return 0;
+
+out:
+	mempool_free(mboxq, phba->mbox_mem_pool);
+out_rdf:
+	/* If there is a mbox error, move on to RDF */
+	phba->cgn_reg_fpin = LPFC_CGN_FPIN_WARN | LPFC_CGN_FPIN_ALARM;
+	phba->cgn_reg_signal = EDC_CG_SIG_NOTSUPPORTED;
+	lpfc_issue_els_rdf(phba->pport, 0);
+	return -EIO;
+}
+
+/**
+ * lpfc_init_idle_stat_hb - Initialize idle_stat tracking
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine initializes the per-cq idle_stat to dynamically dictate
+ * polling decisions.
+ *
+ * Return codes:
+ *   None
+ **/
+static void lpfc_init_idle_stat_hb(struct lpfc_hba *phba)
+{
+	int i;
+	struct lpfc_sli4_hdw_queue *hdwq;
+	struct lpfc_queue *cq;
+	struct lpfc_idle_stat *idle_stat;
+	u64 wall;
+
+	for_each_present_cpu(i) {
+		hdwq = &phba->sli4_hba.hdwq[phba->sli4_hba.cpu_map[i].hdwq];
+		cq = hdwq->io_cq;
+
+		/* Skip if we've already handled this cq's primary CPU */
+		if (cq->chann != i)
+			continue;
+
+		idle_stat = &phba->sli4_hba.idle_stat[i];
+
+		idle_stat->prev_idle = get_cpu_idle_time(i, &wall, 1);
+		idle_stat->prev_wall = wall;
+
+		if (phba->nvmet_support ||
+		    phba->cmf_active_mode != LPFC_CFG_OFF)
+			cq->poll_mode = LPFC_QUEUE_WORK;
+		else
+			cq->poll_mode = LPFC_IRQ_POLL;
+	}
+
+	if (!phba->nvmet_support)
+		schedule_delayed_work(&phba->idle_stat_delay_work,
+				      msecs_to_jiffies(LPFC_IDLE_STAT_DELAY));
+}
+
+static void lpfc_sli4_dip(struct lpfc_hba *phba)
+{
+	uint32_t if_type;
+
+	if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
+	if (if_type == LPFC_SLI_INTF_IF_TYPE_2 ||
+	    if_type == LPFC_SLI_INTF_IF_TYPE_6) {
+		struct lpfc_register reg_data;
+
+		if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
+			       &reg_data.word0))
+			return;
+
+		if (bf_get(lpfc_sliport_status_dip, &reg_data))
+			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+					"2904 Firmware Dump Image Present"
+					" on Adapter");
+	}
+}
+
+/**
+ * lpfc_rx_monitor_create_ring - Initialize ring buffer for rx_monitor
+ * @rx_monitor: Pointer to lpfc_rx_info_monitor object
+ * @entries: Number of rx_info_entry objects to allocate in ring
+ *
+ * Return:
+ * 0 - Success
+ * ENOMEM - Failure to kmalloc
+ **/
+int lpfc_rx_monitor_create_ring(struct lpfc_rx_info_monitor *rx_monitor,
+				u32 entries)
+{
+	rx_monitor->ring = kmalloc_array(entries, sizeof(struct rx_info_entry),
+					 GFP_KERNEL);
+	if (!rx_monitor->ring)
+		return -ENOMEM;
+
+	rx_monitor->head_idx = 0;
+	rx_monitor->tail_idx = 0;
+	spin_lock_init(&rx_monitor->lock);
+	rx_monitor->entries = entries;
+
+	return 0;
+}
+
+/**
+ * lpfc_rx_monitor_destroy_ring - Free ring buffer for rx_monitor
+ * @rx_monitor: Pointer to lpfc_rx_info_monitor object
+ **/
+void lpfc_rx_monitor_destroy_ring(struct lpfc_rx_info_monitor *rx_monitor)
+{
+	spin_lock(&rx_monitor->lock);
+	kfree(rx_monitor->ring);
+	rx_monitor->ring = NULL;
+	rx_monitor->entries = 0;
+	rx_monitor->head_idx = 0;
+	rx_monitor->tail_idx = 0;
+	spin_unlock(&rx_monitor->lock);
+}
+
+/**
+ * lpfc_rx_monitor_record - Insert an entry into rx_monitor's ring
+ * @rx_monitor: Pointer to lpfc_rx_info_monitor object
+ * @entry: Pointer to rx_info_entry
+ *
+ * Used to insert an rx_info_entry into rx_monitor's ring.  Note that this is a
+ * deep copy of rx_info_entry not a shallow copy of the rx_info_entry ptr.
+ *
+ * This is called from lpfc_cmf_timer, which is in timer/softirq context.
+ *
+ * In cases of old data overflow, we do a best effort of FIFO order.
+ **/
+void lpfc_rx_monitor_record(struct lpfc_rx_info_monitor *rx_monitor,
+			    struct rx_info_entry *entry)
+{
+	struct rx_info_entry *ring = rx_monitor->ring;
+	u32 *head_idx = &rx_monitor->head_idx;
+	u32 *tail_idx = &rx_monitor->tail_idx;
+	spinlock_t *ring_lock = &rx_monitor->lock;
+	u32 ring_size = rx_monitor->entries;
+
+	spin_lock(ring_lock);
+	memcpy(&ring[*tail_idx], entry, sizeof(*entry));
+	*tail_idx = (*tail_idx + 1) % ring_size;
+
+	/* Best effort of FIFO saved data */
+	if (*tail_idx == *head_idx)
+		*head_idx = (*head_idx + 1) % ring_size;
+
+	spin_unlock(ring_lock);
+}
+
+/**
+ * lpfc_rx_monitor_report - Read out rx_monitor's ring
+ * @phba: Pointer to lpfc_hba object
+ * @rx_monitor: Pointer to lpfc_rx_info_monitor object
+ * @buf: Pointer to char buffer that will contain rx monitor info data
+ * @buf_len: Length buf including null char
+ * @max_read_entries: Maximum number of entries to read out of ring
+ *
+ * Used to dump/read what's in rx_monitor's ring buffer.
+ *
+ * If buf is NULL || buf_len == 0, then it is implied that we want to log the
+ * information to kmsg instead of filling out buf.
+ *
+ * Return:
+ * Number of entries read out of the ring
+ **/
+u32 lpfc_rx_monitor_report(struct lpfc_hba *phba,
+			   struct lpfc_rx_info_monitor *rx_monitor, char *buf,
+			   u32 buf_len, u32 max_read_entries)
+{
+	struct rx_info_entry *ring = rx_monitor->ring;
+	struct rx_info_entry *entry;
+	u32 *head_idx = &rx_monitor->head_idx;
+	u32 *tail_idx = &rx_monitor->tail_idx;
+	spinlock_t *ring_lock = &rx_monitor->lock;
+	u32 ring_size = rx_monitor->entries;
+	u32 cnt = 0;
+	char tmp[DBG_LOG_STR_SZ] = {0};
+	bool log_to_kmsg = (!buf || !buf_len) ? true : false;
+
+	if (!log_to_kmsg) {
+		/* clear the buffer to be sure */
+		memset(buf, 0, buf_len);
+
+		scnprintf(buf, buf_len, "\t%-16s%-16s%-16s%-16s%-8s%-8s%-8s"
+					"%-8s%-8s%-8s%-16s\n",
+					"MaxBPI", "Tot_Data_CMF",
+					"Tot_Data_Cmd", "Tot_Data_Cmpl",
+					"Lat(us)", "Avg_IO", "Max_IO", "Bsy",
+					"IO_cnt", "Info", "BWutil(ms)");
+	}
+
+	/* Needs to be _irq because record is called from timer interrupt
+	 * context
+	 */
+	spin_lock_irq(ring_lock);
+	while (*head_idx != *tail_idx) {
+		entry = &ring[*head_idx];
+
+		/* Read out this entry's data. */
+		if (!log_to_kmsg) {
+			/* If !log_to_kmsg, then store to buf. */
+			scnprintf(tmp, sizeof(tmp),
+				  "%03d:\t%-16llu%-16llu%-16llu%-16llu%-8llu"
+				  "%-8llu%-8llu%-8u%-8u%-8u%u(%u)\n",
+				  *head_idx, entry->max_bytes_per_interval,
+				  entry->cmf_bytes, entry->total_bytes,
+				  entry->rcv_bytes, entry->avg_io_latency,
+				  entry->avg_io_size, entry->max_read_cnt,
+				  entry->cmf_busy, entry->io_cnt,
+				  entry->cmf_info, entry->timer_utilization,
+				  entry->timer_interval);
+
+			/* Check for buffer overflow */
+			if ((strlen(buf) + strlen(tmp)) >= buf_len)
+				break;
+
+			/* Append entry's data to buffer */
+			strlcat(buf, tmp, buf_len);
+		} else {
+			lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
+					"4410 %02u: MBPI %llu Xmit %llu "
+					"Cmpl %llu Lat %llu ASz %llu Info %02u "
+					"BWUtil %u Int %u slot %u\n",
+					cnt, entry->max_bytes_per_interval,
+					entry->total_bytes, entry->rcv_bytes,
+					entry->avg_io_latency,
+					entry->avg_io_size, entry->cmf_info,
+					entry->timer_utilization,
+					entry->timer_interval, *head_idx);
+		}
+
+		*head_idx = (*head_idx + 1) % ring_size;
+
+		/* Don't feed more than max_read_entries */
+		cnt++;
+		if (cnt >= max_read_entries)
+			break;
+	}
+	spin_unlock_irq(ring_lock);
+
+	return cnt;
+}
+
+/**
+ * lpfc_cmf_setup - Initialize idle_stat tracking
+ * @phba: Pointer to HBA context object.
+ *
+ * This is called from HBA setup during driver load or when the HBA
+ * comes online. this does all the initialization to support CMF and MI.
+ **/
+static int
+lpfc_cmf_setup(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_dmabuf *mp;
+	struct lpfc_pc_sli4_params *sli4_params;
+	int rc, cmf, mi_ver;
+
+	rc = lpfc_sli4_refresh_params(phba);
+	if (unlikely(rc))
+		return rc;
+
+	mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+
+	sli4_params = &phba->sli4_hba.pc_sli4_params;
+
+	/* Always try to enable MI feature if we can */
+	if (sli4_params->mi_ver) {
+		lpfc_set_features(phba, mboxq, LPFC_SET_ENABLE_MI);
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+		mi_ver = bf_get(lpfc_mbx_set_feature_mi,
+				 &mboxq->u.mqe.un.set_feature);
+
+		if (rc == MBX_SUCCESS) {
+			if (mi_ver) {
+				lpfc_printf_log(phba,
+						KERN_WARNING, LOG_CGN_MGMT,
+						"6215 MI is enabled\n");
+				sli4_params->mi_ver = mi_ver;
+			} else {
+				lpfc_printf_log(phba,
+						KERN_WARNING, LOG_CGN_MGMT,
+						"6338 MI is disabled\n");
+				sli4_params->mi_ver = 0;
+			}
+		} else {
+			/* mi_ver is already set from GET_SLI4_PARAMETERS */
+			lpfc_printf_log(phba, KERN_INFO,
+					LOG_CGN_MGMT | LOG_INIT,
+					"6245 Enable MI Mailbox x%x (x%x/x%x) "
+					"failed, rc:x%x mi:x%x\n",
+					bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+					lpfc_sli_config_mbox_subsys_get
+						(phba, mboxq),
+					lpfc_sli_config_mbox_opcode_get
+						(phba, mboxq),
+					rc, sli4_params->mi_ver);
+		}
+	} else {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_CGN_MGMT,
+				"6217 MI is disabled\n");
+	}
+
+	/* Ensure FDMI is enabled for MI if enable_mi is set */
+	if (sli4_params->mi_ver)
+		phba->cfg_fdmi_on = LPFC_FDMI_SUPPORT;
+
+	/* Always try to enable CMF feature if we can */
+	if (sli4_params->cmf) {
+		lpfc_set_features(phba, mboxq, LPFC_SET_ENABLE_CMF);
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+		cmf = bf_get(lpfc_mbx_set_feature_cmf,
+			     &mboxq->u.mqe.un.set_feature);
+		if (rc == MBX_SUCCESS && cmf) {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_CGN_MGMT,
+					"6218 CMF is enabled: mode %d\n",
+					phba->cmf_active_mode);
+		} else {
+			lpfc_printf_log(phba, KERN_WARNING,
+					LOG_CGN_MGMT | LOG_INIT,
+					"6219 Enable CMF Mailbox x%x (x%x/x%x) "
+					"failed, rc:x%x dd:x%x\n",
+					bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+					lpfc_sli_config_mbox_subsys_get
+						(phba, mboxq),
+					lpfc_sli_config_mbox_opcode_get
+						(phba, mboxq),
+					rc, cmf);
+			sli4_params->cmf = 0;
+			phba->cmf_active_mode = LPFC_CFG_OFF;
+			goto no_cmf;
+		}
+
+		/* Allocate Congestion Information Buffer */
+		if (!phba->cgn_i) {
+			mp = kmalloc(sizeof(*mp), GFP_KERNEL);
+			if (mp)
+				mp->virt = dma_alloc_coherent
+						(&phba->pcidev->dev,
+						sizeof(struct lpfc_cgn_info),
+						&mp->phys, GFP_KERNEL);
+			if (!mp || !mp->virt) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+						"2640 Failed to alloc memory "
+						"for Congestion Info\n");
+				kfree(mp);
+				sli4_params->cmf = 0;
+				phba->cmf_active_mode = LPFC_CFG_OFF;
+				goto no_cmf;
+			}
+			phba->cgn_i = mp;
+
+			/* initialize congestion buffer info */
+			lpfc_init_congestion_buf(phba);
+			lpfc_init_congestion_stat(phba);
+
+			/* Zero out Congestion Signal counters */
+			atomic64_set(&phba->cgn_acqe_stat.alarm, 0);
+			atomic64_set(&phba->cgn_acqe_stat.warn, 0);
+		}
+
+		rc = lpfc_sli4_cgn_params_read(phba);
+		if (rc < 0) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT | LOG_INIT,
+					"6242 Error reading Cgn Params (%d)\n",
+					rc);
+			/* Ensure CGN Mode is off */
+			sli4_params->cmf = 0;
+		} else if (!rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT | LOG_INIT,
+					"6243 CGN Event empty object.\n");
+			/* Ensure CGN Mode is off */
+			sli4_params->cmf = 0;
+		}
+	} else {
+no_cmf:
+		lpfc_printf_log(phba, KERN_WARNING, LOG_CGN_MGMT,
+				"6220 CMF is disabled\n");
+	}
+
+	/* Only register congestion buffer with firmware if BOTH
+	 * CMF and E2E are enabled.
+	 */
+	if (sli4_params->cmf && sli4_params->mi_ver) {
+		rc = lpfc_reg_congestion_buf(phba);
+		if (rc) {
+			dma_free_coherent(&phba->pcidev->dev,
+					  sizeof(struct lpfc_cgn_info),
+					  phba->cgn_i->virt, phba->cgn_i->phys);
+			kfree(phba->cgn_i);
+			phba->cgn_i = NULL;
+			/* Ensure CGN Mode is off */
+			phba->cmf_active_mode = LPFC_CFG_OFF;
+			return 0;
+		}
+	}
+	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+			"6470 Setup MI version %d CMF %d mode %d\n",
+			sli4_params->mi_ver, sli4_params->cmf,
+			phba->cmf_active_mode);
+
+	mempool_free(mboxq, phba->mbox_mem_pool);
+
+	/* Initialize atomic counters */
+	atomic_set(&phba->cgn_fabric_warn_cnt, 0);
+	atomic_set(&phba->cgn_fabric_alarm_cnt, 0);
+	atomic_set(&phba->cgn_sync_alarm_cnt, 0);
+	atomic_set(&phba->cgn_sync_warn_cnt, 0);
+	atomic_set(&phba->cgn_driver_evt_cnt, 0);
+	atomic_set(&phba->cgn_latency_evt_cnt, 0);
+	atomic64_set(&phba->cgn_latency_evt, 0);
+
+	phba->cmf_interval_rate = LPFC_CMF_INTERVAL;
+
+	/* Allocate RX Monitor Buffer */
+	if (!phba->rx_monitor) {
+		phba->rx_monitor = kzalloc(sizeof(*phba->rx_monitor),
+					   GFP_KERNEL);
+
+		if (!phba->rx_monitor) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2644 Failed to alloc memory "
+					"for RX Monitor Buffer\n");
+			return -ENOMEM;
+		}
+
+		/* Instruct the rx_monitor object to instantiate its ring */
+		if (lpfc_rx_monitor_create_ring(phba->rx_monitor,
+						LPFC_MAX_RXMONITOR_ENTRY)) {
+			kfree(phba->rx_monitor);
+			phba->rx_monitor = NULL;
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2645 Failed to alloc memory "
+					"for RX Monitor's Ring\n");
+			return -ENOMEM;
+		}
+	}
+
+	return 0;
+}
+
+static int
+lpfc_set_host_tm(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mboxq;
+	uint32_t len, rc;
+	struct timespec64 cur_time;
+	struct tm broken;
+	uint32_t month, day, year;
+	uint32_t hour, minute, second;
+	struct lpfc_mbx_set_host_date_time *tm;
+
+	mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+
+	len = sizeof(struct lpfc_mbx_set_host_data) -
+		sizeof(struct lpfc_sli4_cfg_mhdr);
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_SET_HOST_DATA, len,
+			 LPFC_SLI4_MBX_EMBED);
+
+	mboxq->u.mqe.un.set_host_data.param_id = LPFC_SET_HOST_DATE_TIME;
+	mboxq->u.mqe.un.set_host_data.param_len =
+			sizeof(struct lpfc_mbx_set_host_date_time);
+	tm = &mboxq->u.mqe.un.set_host_data.un.tm;
+	ktime_get_real_ts64(&cur_time);
+	time64_to_tm(cur_time.tv_sec, 0, &broken);
+	month = broken.tm_mon + 1;
+	day = broken.tm_mday;
+	year = broken.tm_year - 100;
+	hour = broken.tm_hour;
+	minute = broken.tm_min;
+	second = broken.tm_sec;
+	bf_set(lpfc_mbx_set_host_month, tm, month);
+	bf_set(lpfc_mbx_set_host_day, tm, day);
+	bf_set(lpfc_mbx_set_host_year, tm, year);
+	bf_set(lpfc_mbx_set_host_hour, tm, hour);
+	bf_set(lpfc_mbx_set_host_min, tm, minute);
+	bf_set(lpfc_mbx_set_host_sec, tm, second);
+
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_hba_setup - SLI4 device initialization PCI function
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is the main SLI4 device initialization PCI function. This
+ * function is called by the HBA initialization code, HBA reset code and
+ * HBA error attention handler code. Caller is not required to hold any
+ * locks.
+ **/
+int
+lpfc_sli4_hba_setup(struct lpfc_hba *phba)
+{
+	int rc, i, cnt, len, dd;
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mqe *mqe;
+	uint8_t *vpd;
+	uint32_t vpd_size;
+	uint32_t ftr_rsp = 0;
+	struct Scsi_Host *shost = lpfc_shost_from_vport(phba->pport);
+	struct lpfc_vport *vport = phba->pport;
+	struct lpfc_dmabuf *mp;
+	struct lpfc_rqb *rqbp;
+	u32 flg;
+
+	/* Perform a PCI function reset to start from clean */
+	rc = lpfc_pci_function_reset(phba);
+	if (unlikely(rc))
+		return -ENODEV;
+
+	/* Check the HBA Host Status Register for readyness */
+	rc = lpfc_sli4_post_status_check(phba);
+	if (unlikely(rc))
+		return -ENODEV;
+	else {
+		spin_lock_irq(&phba->hbalock);
+		phba->sli.sli_flag |= LPFC_SLI_ACTIVE;
+		flg = phba->sli.sli_flag;
+		spin_unlock_irq(&phba->hbalock);
+		/* Allow a little time after setting SLI_ACTIVE for any polled
+		 * MBX commands to complete via BSG.
+		 */
+		for (i = 0; i < 50 && (flg & LPFC_SLI_MBOX_ACTIVE); i++) {
+			msleep(20);
+			spin_lock_irq(&phba->hbalock);
+			flg = phba->sli.sli_flag;
+			spin_unlock_irq(&phba->hbalock);
+		}
+	}
+	phba->hba_flag &= ~HBA_SETUP;
+
+	lpfc_sli4_dip(phba);
+
+	/*
+	 * Allocate a single mailbox container for initializing the
+	 * port.
+	 */
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+
+	/* Issue READ_REV to collect vpd and FW information. */
+	vpd_size = SLI4_PAGE_SIZE;
+	vpd = kzalloc(vpd_size, GFP_KERNEL);
+	if (!vpd) {
+		rc = -ENOMEM;
+		goto out_free_mbox;
+	}
+
+	rc = lpfc_sli4_read_rev(phba, mboxq, vpd, &vpd_size);
+	if (unlikely(rc)) {
+		kfree(vpd);
+		goto out_free_mbox;
+	}
+
+	mqe = &mboxq->u.mqe;
+	phba->sli_rev = bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev);
+	if (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev)) {
+		phba->hba_flag |= HBA_FCOE_MODE;
+		phba->fcp_embed_io = 0;	/* SLI4 FC support only */
+	} else {
+		phba->hba_flag &= ~HBA_FCOE_MODE;
+	}
+
+	if (bf_get(lpfc_mbx_rd_rev_cee_ver, &mqe->un.read_rev) ==
+		LPFC_DCBX_CEE_MODE)
+		phba->hba_flag |= HBA_FIP_SUPPORT;
+	else
+		phba->hba_flag &= ~HBA_FIP_SUPPORT;
+
+	phba->hba_flag &= ~HBA_IOQ_FLUSH;
+
+	if (phba->sli_rev != LPFC_SLI_REV4) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"0376 READ_REV Error. SLI Level %d "
+			"FCoE enabled %d\n",
+			phba->sli_rev, phba->hba_flag & HBA_FCOE_MODE);
+		rc = -EIO;
+		kfree(vpd);
+		goto out_free_mbox;
+	}
+
+	rc = lpfc_set_host_tm(phba);
+	lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT,
+			"6468 Set host date / time: Status x%x:\n", rc);
+
+	/*
+	 * Continue initialization with default values even if driver failed
+	 * to read FCoE param config regions, only read parameters if the
+	 * board is FCoE
+	 */
+	if (phba->hba_flag & HBA_FCOE_MODE &&
+	    lpfc_sli4_read_fcoe_params(phba))
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_INIT,
+			"2570 Failed to read FCoE parameters\n");
+
+	/*
+	 * Retrieve sli4 device physical port name, failure of doing it
+	 * is considered as non-fatal.
+	 */
+	rc = lpfc_sli4_retrieve_pport_name(phba);
+	if (!rc)
+		lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+				"3080 Successful retrieving SLI4 device "
+				"physical port name: %s.\n", phba->Port);
+
+	rc = lpfc_sli4_get_ctl_attr(phba);
+	if (!rc)
+		lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+				"8351 Successful retrieving SLI4 device "
+				"CTL ATTR\n");
+
+	/*
+	 * Evaluate the read rev and vpd data. Populate the driver
+	 * state with the results. If this routine fails, the failure
+	 * is not fatal as the driver will use generic values.
+	 */
+	rc = lpfc_parse_vpd(phba, vpd, vpd_size);
+	if (unlikely(!rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0377 Error %d parsing vpd. "
+				"Using defaults.\n", rc);
+		rc = 0;
+	}
+	kfree(vpd);
+
+	/* Save information as VPD data */
+	phba->vpd.rev.biuRev = mqe->un.read_rev.first_hw_rev;
+	phba->vpd.rev.smRev = mqe->un.read_rev.second_hw_rev;
+
+	/*
+	 * This is because first G7 ASIC doesn't support the standard
+	 * 0x5a NVME cmd descriptor type/subtype
+	 */
+	if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+			LPFC_SLI_INTF_IF_TYPE_6) &&
+	    (phba->vpd.rev.biuRev == LPFC_G7_ASIC_1) &&
+	    (phba->vpd.rev.smRev == 0) &&
+	    (phba->cfg_nvme_embed_cmd == 1))
+		phba->cfg_nvme_embed_cmd = 0;
+
+	phba->vpd.rev.endecRev = mqe->un.read_rev.third_hw_rev;
+	phba->vpd.rev.fcphHigh = bf_get(lpfc_mbx_rd_rev_fcph_high,
+					 &mqe->un.read_rev);
+	phba->vpd.rev.fcphLow = bf_get(lpfc_mbx_rd_rev_fcph_low,
+				       &mqe->un.read_rev);
+	phba->vpd.rev.feaLevelHigh = bf_get(lpfc_mbx_rd_rev_ftr_lvl_high,
+					    &mqe->un.read_rev);
+	phba->vpd.rev.feaLevelLow = bf_get(lpfc_mbx_rd_rev_ftr_lvl_low,
+					   &mqe->un.read_rev);
+	phba->vpd.rev.sli1FwRev = mqe->un.read_rev.fw_id_rev;
+	memcpy(phba->vpd.rev.sli1FwName, mqe->un.read_rev.fw_name, 16);
+	phba->vpd.rev.sli2FwRev = mqe->un.read_rev.ulp_fw_id_rev;
+	memcpy(phba->vpd.rev.sli2FwName, mqe->un.read_rev.ulp_fw_name, 16);
+	phba->vpd.rev.opFwRev = mqe->un.read_rev.fw_id_rev;
+	memcpy(phba->vpd.rev.opFwName, mqe->un.read_rev.fw_name, 16);
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0380 READ_REV Status x%x "
+			"fw_rev:%s fcphHi:%x fcphLo:%x flHi:%x flLo:%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0,
+			bf_get(lpfc_mqe_status, mqe),
+			phba->vpd.rev.opFwName,
+			phba->vpd.rev.fcphHigh, phba->vpd.rev.fcphLow,
+			phba->vpd.rev.feaLevelHigh, phba->vpd.rev.feaLevelLow);
+
+	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+	    LPFC_SLI_INTF_IF_TYPE_0) {
+		lpfc_set_features(phba, mboxq, LPFC_SET_UE_RECOVERY);
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+		if (rc == MBX_SUCCESS) {
+			phba->hba_flag |= HBA_RECOVERABLE_UE;
+			/* Set 1Sec interval to detect UE */
+			phba->eratt_poll_interval = 1;
+			phba->sli4_hba.ue_to_sr = bf_get(
+					lpfc_mbx_set_feature_UESR,
+					&mboxq->u.mqe.un.set_feature);
+			phba->sli4_hba.ue_to_rp = bf_get(
+					lpfc_mbx_set_feature_UERP,
+					&mboxq->u.mqe.un.set_feature);
+		}
+	}
+
+	if (phba->cfg_enable_mds_diags && phba->mds_diags_support) {
+		/* Enable MDS Diagnostics only if the SLI Port supports it */
+		lpfc_set_features(phba, mboxq, LPFC_SET_MDS_DIAGS);
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+		if (rc != MBX_SUCCESS)
+			phba->mds_diags_support = 0;
+	}
+
+	/*
+	 * Discover the port's supported feature set and match it against the
+	 * hosts requests.
+	 */
+	lpfc_request_features(phba, mboxq);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (unlikely(rc)) {
+		rc = -EIO;
+		goto out_free_mbox;
+	}
+
+	/* Disable VMID if app header is not supported */
+	if (phba->cfg_vmid_app_header && !(bf_get(lpfc_mbx_rq_ftr_rsp_ashdr,
+						  &mqe->un.req_ftrs))) {
+		bf_set(lpfc_ftr_ashdr, &phba->sli4_hba.sli4_flags, 0);
+		phba->cfg_vmid_app_header = 0;
+		lpfc_printf_log(phba, KERN_DEBUG, LOG_SLI,
+				"1242 vmid feature not supported\n");
+	}
+
+	/*
+	 * The port must support FCP initiator mode as this is the
+	 * only mode running in the host.
+	 */
+	if (!(bf_get(lpfc_mbx_rq_ftr_rsp_fcpi, &mqe->un.req_ftrs))) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"0378 No support for fcpi mode.\n");
+		ftr_rsp++;
+	}
+
+	/* Performance Hints are ONLY for FCoE */
+	if (phba->hba_flag & HBA_FCOE_MODE) {
+		if (bf_get(lpfc_mbx_rq_ftr_rsp_perfh, &mqe->un.req_ftrs))
+			phba->sli3_options |= LPFC_SLI4_PERFH_ENABLED;
+		else
+			phba->sli3_options &= ~LPFC_SLI4_PERFH_ENABLED;
+	}
+
+	/*
+	 * If the port cannot support the host's requested features
+	 * then turn off the global config parameters to disable the
+	 * feature in the driver.  This is not a fatal error.
+	 */
+	if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) {
+		if (!(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs))) {
+			phba->cfg_enable_bg = 0;
+			phba->sli3_options &= ~LPFC_SLI3_BG_ENABLED;
+			ftr_rsp++;
+		}
+	}
+
+	if (phba->max_vpi && phba->cfg_enable_npiv &&
+	    !(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+		ftr_rsp++;
+
+	if (ftr_rsp) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"0379 Feature Mismatch Data: x%08x %08x "
+				"x%x x%x x%x\n", mqe->un.req_ftrs.word2,
+				mqe->un.req_ftrs.word3, phba->cfg_enable_bg,
+				phba->cfg_enable_npiv, phba->max_vpi);
+		if (!(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+			phba->cfg_enable_bg = 0;
+		if (!(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+			phba->cfg_enable_npiv = 0;
+	}
+
+	/* These SLI3 features are assumed in SLI4 */
+	spin_lock_irq(&phba->hbalock);
+	phba->sli3_options |= (LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Always try to enable dual dump feature if we can */
+	lpfc_set_features(phba, mboxq, LPFC_SET_DUAL_DUMP);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	dd = bf_get(lpfc_mbx_set_feature_dd, &mboxq->u.mqe.un.set_feature);
+	if ((rc == MBX_SUCCESS) && (dd == LPFC_ENABLE_DUAL_DUMP))
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"6448 Dual Dump is enabled\n");
+	else
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI | LOG_INIT,
+				"6447 Dual Dump Mailbox x%x (x%x/x%x) failed, "
+				"rc:x%x dd:x%x\n",
+				bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+				lpfc_sli_config_mbox_subsys_get(
+					phba, mboxq),
+				lpfc_sli_config_mbox_opcode_get(
+					phba, mboxq),
+				rc, dd);
+	/*
+	 * Allocate all resources (xri,rpi,vpi,vfi) now.  Subsequent
+	 * calls depends on these resources to complete port setup.
+	 */
+	rc = lpfc_sli4_alloc_resource_identifiers(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2920 Failed to alloc Resource IDs "
+				"rc = x%x\n", rc);
+		goto out_free_mbox;
+	}
+
+	lpfc_set_host_data(phba, mboxq);
+
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"2134 Failed to set host os driver version %x",
+				rc);
+	}
+
+	/* Read the port's service parameters. */
+	rc = lpfc_read_sparam(phba, mboxq, vport->vpi);
+	if (rc) {
+		phba->link_state = LPFC_HBA_ERROR;
+		rc = -ENOMEM;
+		goto out_free_mbox;
+	}
+
+	mboxq->vport = vport;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	mp = (struct lpfc_dmabuf *)mboxq->ctx_buf;
+	if (rc == MBX_SUCCESS) {
+		memcpy(&vport->fc_sparam, mp->virt, sizeof(struct serv_parm));
+		rc = 0;
+	}
+
+	/*
+	 * This memory was allocated by the lpfc_read_sparam routine but is
+	 * no longer needed.  It is released and ctx_buf NULLed to prevent
+	 * unintended pointer access as the mbox is reused.
+	 */
+	lpfc_mbuf_free(phba, mp->virt, mp->phys);
+	kfree(mp);
+	mboxq->ctx_buf = NULL;
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0382 READ_SPARAM command failed "
+				"status %d, mbxStatus x%x\n",
+				rc, bf_get(lpfc_mqe_status, mqe));
+		phba->link_state = LPFC_HBA_ERROR;
+		rc = -EIO;
+		goto out_free_mbox;
+	}
+
+	lpfc_update_vport_wwn(vport);
+
+	/* Update the fc_host data structures with new wwn. */
+	fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
+	fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+
+	/* Create all the SLI4 queues */
+	rc = lpfc_sli4_queue_create(phba);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"3089 Failed to allocate queues\n");
+		rc = -ENODEV;
+		goto out_free_mbox;
+	}
+	/* Set up all the queues to the device */
+	rc = lpfc_sli4_queue_setup(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0381 Error %d during queue setup.\n ", rc);
+		goto out_stop_timers;
+	}
+	/* Initialize the driver internal SLI layer lists. */
+	lpfc_sli4_setup(phba);
+	lpfc_sli4_queue_init(phba);
+
+	/* update host els xri-sgl sizes and mappings */
+	rc = lpfc_sli4_els_sgl_update(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"1400 Failed to update xri-sgl size and "
+				"mapping: %d\n", rc);
+		goto out_destroy_queue;
+	}
+
+	/* register the els sgl pool to the port */
+	rc = lpfc_sli4_repost_sgl_list(phba, &phba->sli4_hba.lpfc_els_sgl_list,
+				       phba->sli4_hba.els_xri_cnt);
+	if (unlikely(rc < 0)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0582 Error %d during els sgl post "
+				"operation\n", rc);
+		rc = -ENODEV;
+		goto out_destroy_queue;
+	}
+	phba->sli4_hba.els_xri_cnt = rc;
+
+	if (phba->nvmet_support) {
+		/* update host nvmet xri-sgl sizes and mappings */
+		rc = lpfc_sli4_nvmet_sgl_update(phba);
+		if (unlikely(rc)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"6308 Failed to update nvmet-sgl size "
+					"and mapping: %d\n", rc);
+			goto out_destroy_queue;
+		}
+
+		/* register the nvmet sgl pool to the port */
+		rc = lpfc_sli4_repost_sgl_list(
+			phba,
+			&phba->sli4_hba.lpfc_nvmet_sgl_list,
+			phba->sli4_hba.nvmet_xri_cnt);
+		if (unlikely(rc < 0)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"3117 Error %d during nvmet "
+					"sgl post\n", rc);
+			rc = -ENODEV;
+			goto out_destroy_queue;
+		}
+		phba->sli4_hba.nvmet_xri_cnt = rc;
+
+		/* We allocate an iocbq for every receive context SGL.
+		 * The additional allocation is for abort and ls handling.
+		 */
+		cnt = phba->sli4_hba.nvmet_xri_cnt +
+			phba->sli4_hba.max_cfg_param.max_xri;
+	} else {
+		/* update host common xri-sgl sizes and mappings */
+		rc = lpfc_sli4_io_sgl_update(phba);
+		if (unlikely(rc)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"6082 Failed to update nvme-sgl size "
+					"and mapping: %d\n", rc);
+			goto out_destroy_queue;
+		}
+
+		/* register the allocated common sgl pool to the port */
+		rc = lpfc_sli4_repost_io_sgl_list(phba);
+		if (unlikely(rc)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"6116 Error %d during nvme sgl post "
+					"operation\n", rc);
+			/* Some NVME buffers were moved to abort nvme list */
+			/* A pci function reset will repost them */
+			rc = -ENODEV;
+			goto out_destroy_queue;
+		}
+		/* Each lpfc_io_buf job structure has an iocbq element.
+		 * This cnt provides for abort, els, ct and ls requests.
+		 */
+		cnt = phba->sli4_hba.max_cfg_param.max_xri;
+	}
+
+	if (!phba->sli.iocbq_lookup) {
+		/* Initialize and populate the iocb list per host */
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2821 initialize iocb list with %d entries\n",
+				cnt);
+		rc = lpfc_init_iocb_list(phba, cnt);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"1413 Failed to init iocb list.\n");
+			goto out_destroy_queue;
+		}
+	}
+
+	if (phba->nvmet_support)
+		lpfc_nvmet_create_targetport(phba);
+
+	if (phba->nvmet_support && phba->cfg_nvmet_mrq) {
+		/* Post initial buffers to all RQs created */
+		for (i = 0; i < phba->cfg_nvmet_mrq; i++) {
+			rqbp = phba->sli4_hba.nvmet_mrq_hdr[i]->rqbp;
+			INIT_LIST_HEAD(&rqbp->rqb_buffer_list);
+			rqbp->rqb_alloc_buffer = lpfc_sli4_nvmet_alloc;
+			rqbp->rqb_free_buffer = lpfc_sli4_nvmet_free;
+			rqbp->entry_count = LPFC_NVMET_RQE_DEF_COUNT;
+			rqbp->buffer_count = 0;
+
+			lpfc_post_rq_buffer(
+				phba, phba->sli4_hba.nvmet_mrq_hdr[i],
+				phba->sli4_hba.nvmet_mrq_data[i],
+				phba->cfg_nvmet_mrq_post, i);
+		}
+	}
+
+	/* Post the rpi header region to the device. */
+	rc = lpfc_sli4_post_all_rpi_hdrs(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0393 Error %d during rpi post operation\n",
+				rc);
+		rc = -ENODEV;
+		goto out_free_iocblist;
+	}
+	lpfc_sli4_node_prep(phba);
+
+	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
+		if ((phba->nvmet_support == 0) || (phba->cfg_nvmet_mrq == 1)) {
+			/*
+			 * The FC Port needs to register FCFI (index 0)
+			 */
+			lpfc_reg_fcfi(phba, mboxq);
+			mboxq->vport = phba->pport;
+			rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+			if (rc != MBX_SUCCESS)
+				goto out_unset_queue;
+			rc = 0;
+			phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi,
+						&mboxq->u.mqe.un.reg_fcfi);
+		} else {
+			/* We are a NVME Target mode with MRQ > 1 */
+
+			/* First register the FCFI */
+			lpfc_reg_fcfi_mrq(phba, mboxq, 0);
+			mboxq->vport = phba->pport;
+			rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+			if (rc != MBX_SUCCESS)
+				goto out_unset_queue;
+			rc = 0;
+			phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_mrq_fcfi,
+						&mboxq->u.mqe.un.reg_fcfi_mrq);
+
+			/* Next register the MRQs */
+			lpfc_reg_fcfi_mrq(phba, mboxq, 1);
+			mboxq->vport = phba->pport;
+			rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+			if (rc != MBX_SUCCESS)
+				goto out_unset_queue;
+			rc = 0;
+		}
+		/* Check if the port is configured to be disabled */
+		lpfc_sli_read_link_ste(phba);
+	}
+
+	/* Don't post more new bufs if repost already recovered
+	 * the nvme sgls.
+	 */
+	if (phba->nvmet_support == 0) {
+		if (phba->sli4_hba.io_xri_cnt == 0) {
+			len = lpfc_new_io_buf(
+					      phba, phba->sli4_hba.io_xri_max);
+			if (len == 0) {
+				rc = -ENOMEM;
+				goto out_unset_queue;
+			}
+
+			if (phba->cfg_xri_rebalancing)
+				lpfc_create_multixri_pools(phba);
+		}
+	} else {
+		phba->cfg_xri_rebalancing = 0;
+	}
+
+	/* Allow asynchronous mailbox command to go through */
+	spin_lock_irq(&phba->hbalock);
+	phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Post receive buffers to the device */
+	lpfc_sli4_rb_setup(phba);
+
+	/* Reset HBA FCF states after HBA reset */
+	phba->fcf.fcf_flag = 0;
+	phba->fcf.current_rec.flag = 0;
+
+	/* Start the ELS watchdog timer */
+	mod_timer(&vport->els_tmofunc,
+		  jiffies + msecs_to_jiffies(1000 * (phba->fc_ratov * 2)));
+
+	/* Start heart beat timer */
+	mod_timer(&phba->hb_tmofunc,
+		  jiffies + msecs_to_jiffies(1000 * LPFC_HB_MBOX_INTERVAL));
+	phba->hba_flag &= ~(HBA_HBEAT_INP | HBA_HBEAT_TMO);
+	phba->last_completion_time = jiffies;
+
+	/* start eq_delay heartbeat */
+	if (phba->cfg_auto_imax)
+		queue_delayed_work(phba->wq, &phba->eq_delay_work,
+				   msecs_to_jiffies(LPFC_EQ_DELAY_MSECS));
+
+	/* start per phba idle_stat_delay heartbeat */
+	lpfc_init_idle_stat_hb(phba);
+
+	/* Start error attention (ERATT) polling timer */
+	mod_timer(&phba->eratt_poll,
+		  jiffies + msecs_to_jiffies(1000 * phba->eratt_poll_interval));
+
+	/* Enable PCIe device Advanced Error Reporting (AER) if configured */
+	if (phba->cfg_aer_support == 1 && !(phba->hba_flag & HBA_AER_ENABLED)) {
+		rc = pci_enable_pcie_error_reporting(phba->pcidev);
+		if (!rc) {
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"2829 This device supports "
+					"Advanced Error Reporting (AER)\n");
+			spin_lock_irq(&phba->hbalock);
+			phba->hba_flag |= HBA_AER_ENABLED;
+			spin_unlock_irq(&phba->hbalock);
+		} else {
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"2830 This device does not support "
+					"Advanced Error Reporting (AER)\n");
+			phba->cfg_aer_support = 0;
+		}
+		rc = 0;
+	}
+
+	/*
+	 * The port is ready, set the host's link state to LINK_DOWN
+	 * in preparation for link interrupts.
+	 */
+	spin_lock_irq(&phba->hbalock);
+	phba->link_state = LPFC_LINK_DOWN;
+
+	/* Check if physical ports are trunked */
+	if (bf_get(lpfc_conf_trunk_port0, &phba->sli4_hba))
+		phba->trunk_link.link0.state = LPFC_LINK_DOWN;
+	if (bf_get(lpfc_conf_trunk_port1, &phba->sli4_hba))
+		phba->trunk_link.link1.state = LPFC_LINK_DOWN;
+	if (bf_get(lpfc_conf_trunk_port2, &phba->sli4_hba))
+		phba->trunk_link.link2.state = LPFC_LINK_DOWN;
+	if (bf_get(lpfc_conf_trunk_port3, &phba->sli4_hba))
+		phba->trunk_link.link3.state = LPFC_LINK_DOWN;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Arm the CQs and then EQs on device */
+	lpfc_sli4_arm_cqeq_intr(phba);
+
+	/* Indicate device interrupt mode */
+	phba->sli4_hba.intr_enable = 1;
+
+	/* Setup CMF after HBA is initialized */
+	lpfc_cmf_setup(phba);
+
+	if (!(phba->hba_flag & HBA_FCOE_MODE) &&
+	    (phba->hba_flag & LINK_DISABLED)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"3103 Adapter Link is disabled.\n");
+		lpfc_down_link(phba, mboxq);
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+		if (rc != MBX_SUCCESS) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"3104 Adapter failed to issue "
+					"DOWN_LINK mbox cmd, rc:x%x\n", rc);
+			goto out_io_buff_free;
+		}
+	} else if (phba->cfg_suppress_link_up == LPFC_INITIALIZE_LINK) {
+		/* don't perform init_link on SLI4 FC port loopback test */
+		if (!(phba->link_flag & LS_LOOPBACK_MODE)) {
+			rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
+			if (rc)
+				goto out_io_buff_free;
+		}
+	}
+	mempool_free(mboxq, phba->mbox_mem_pool);
+
+	/* Enable RAS FW log support */
+	lpfc_sli4_ras_setup(phba);
+
+	phba->hba_flag |= HBA_SETUP;
+	return rc;
+
+out_io_buff_free:
+	/* Free allocated IO Buffers */
+	lpfc_io_free(phba);
+out_unset_queue:
+	/* Unset all the queues set up in this routine when error out */
+	lpfc_sli4_queue_unset(phba);
+out_free_iocblist:
+	lpfc_free_iocb_list(phba);
+out_destroy_queue:
+	lpfc_sli4_queue_destroy(phba);
+out_stop_timers:
+	lpfc_stop_hba_timers(phba);
+out_free_mbox:
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return rc;
+}
+
+/**
+ * lpfc_mbox_timeout - Timeout call back function for mbox timer
+ * @t: Context to fetch pointer to hba structure from.
+ *
+ * This is the callback function for mailbox timer. The mailbox
+ * timer is armed when a new mailbox command is issued and the timer
+ * is deleted when the mailbox complete. The function is called by
+ * the kernel timer code when a mailbox does not complete within
+ * expected time. This function wakes up the worker thread to
+ * process the mailbox timeout and returns. All the processing is
+ * done by the worker thread function lpfc_mbox_timeout_handler.
+ **/
+void
+lpfc_mbox_timeout(struct timer_list *t)
+{
+	struct lpfc_hba  *phba = from_timer(phba, t, sli.mbox_tmo);
+	unsigned long iflag;
+	uint32_t tmo_posted;
+
+	spin_lock_irqsave(&phba->pport->work_port_lock, iflag);
+	tmo_posted = phba->pport->work_port_events & WORKER_MBOX_TMO;
+	if (!tmo_posted)
+		phba->pport->work_port_events |= WORKER_MBOX_TMO;
+	spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag);
+
+	if (!tmo_posted)
+		lpfc_worker_wake_up(phba);
+	return;
+}
+
+/**
+ * lpfc_sli4_mbox_completions_pending - check to see if any mailbox completions
+ *                                    are pending
+ * @phba: Pointer to HBA context object.
+ *
+ * This function checks if any mailbox completions are present on the mailbox
+ * completion queue.
+ **/
+static bool
+lpfc_sli4_mbox_completions_pending(struct lpfc_hba *phba)
+{
+
+	uint32_t idx;
+	struct lpfc_queue *mcq;
+	struct lpfc_mcqe *mcqe;
+	bool pending_completions = false;
+	uint8_t	qe_valid;
+
+	if (unlikely(!phba) || (phba->sli_rev != LPFC_SLI_REV4))
+		return false;
+
+	/* Check for completions on mailbox completion queue */
+
+	mcq = phba->sli4_hba.mbx_cq;
+	idx = mcq->hba_index;
+	qe_valid = mcq->qe_valid;
+	while (bf_get_le32(lpfc_cqe_valid,
+	       (struct lpfc_cqe *)lpfc_sli4_qe(mcq, idx)) == qe_valid) {
+		mcqe = (struct lpfc_mcqe *)(lpfc_sli4_qe(mcq, idx));
+		if (bf_get_le32(lpfc_trailer_completed, mcqe) &&
+		    (!bf_get_le32(lpfc_trailer_async, mcqe))) {
+			pending_completions = true;
+			break;
+		}
+		idx = (idx + 1) % mcq->entry_count;
+		if (mcq->hba_index == idx)
+			break;
+
+		/* if the index wrapped around, toggle the valid bit */
+		if (phba->sli4_hba.pc_sli4_params.cqav && !idx)
+			qe_valid = (qe_valid) ? 0 : 1;
+	}
+	return pending_completions;
+
+}
+
+/**
+ * lpfc_sli4_process_missed_mbox_completions - process mbox completions
+ *					      that were missed.
+ * @phba: Pointer to HBA context object.
+ *
+ * For sli4, it is possible to miss an interrupt. As such mbox completions
+ * maybe missed causing erroneous mailbox timeouts to occur. This function
+ * checks to see if mbox completions are on the mailbox completion queue
+ * and will process all the completions associated with the eq for the
+ * mailbox completion queue.
+ **/
+static bool
+lpfc_sli4_process_missed_mbox_completions(struct lpfc_hba *phba)
+{
+	struct lpfc_sli4_hba *sli4_hba = &phba->sli4_hba;
+	uint32_t eqidx;
+	struct lpfc_queue *fpeq = NULL;
+	struct lpfc_queue *eq;
+	bool mbox_pending;
+
+	if (unlikely(!phba) || (phba->sli_rev != LPFC_SLI_REV4))
+		return false;
+
+	/* Find the EQ associated with the mbox CQ */
+	if (sli4_hba->hdwq) {
+		for (eqidx = 0; eqidx < phba->cfg_irq_chann; eqidx++) {
+			eq = phba->sli4_hba.hba_eq_hdl[eqidx].eq;
+			if (eq && eq->queue_id == sli4_hba->mbx_cq->assoc_qid) {
+				fpeq = eq;
+				break;
+			}
+		}
+	}
+	if (!fpeq)
+		return false;
+
+	/* Turn off interrupts from this EQ */
+
+	sli4_hba->sli4_eq_clr_intr(fpeq);
+
+	/* Check to see if a mbox completion is pending */
+
+	mbox_pending = lpfc_sli4_mbox_completions_pending(phba);
+
+	/*
+	 * If a mbox completion is pending, process all the events on EQ
+	 * associated with the mbox completion queue (this could include
+	 * mailbox commands, async events, els commands, receive queue data
+	 * and fcp commands)
+	 */
+
+	if (mbox_pending)
+		/* process and rearm the EQ */
+		lpfc_sli4_process_eq(phba, fpeq, LPFC_QUEUE_REARM);
+	else
+		/* Always clear and re-arm the EQ */
+		sli4_hba->sli4_write_eq_db(phba, fpeq, 0, LPFC_QUEUE_REARM);
+
+	return mbox_pending;
+
+}
+
+/**
+ * lpfc_mbox_timeout_handler - Worker thread function to handle mailbox timeout
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called from worker thread when a mailbox command times out.
+ * The caller is not required to hold any locks. This function will reset the
+ * HBA and recover all the pending commands.
+ **/
+void
+lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *pmbox = phba->sli.mbox_active;
+	MAILBOX_t *mb = NULL;
+
+	struct lpfc_sli *psli = &phba->sli;
+
+	/* If the mailbox completed, process the completion */
+	lpfc_sli4_process_missed_mbox_completions(phba);
+
+	if (!(psli->sli_flag & LPFC_SLI_ACTIVE))
+		return;
+
+	if (pmbox != NULL)
+		mb = &pmbox->u.mb;
+	/* Check the pmbox pointer first.  There is a race condition
+	 * between the mbox timeout handler getting executed in the
+	 * worklist and the mailbox actually completing. When this
+	 * race condition occurs, the mbox_active will be NULL.
+	 */
+	spin_lock_irq(&phba->hbalock);
+	if (pmbox == NULL) {
+		lpfc_printf_log(phba, KERN_WARNING,
+				LOG_MBOX | LOG_SLI,
+				"0353 Active Mailbox cleared - mailbox timeout "
+				"exiting\n");
+		spin_unlock_irq(&phba->hbalock);
+		return;
+	}
+
+	/* Mbox cmd <mbxCommand> timeout */
+	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"0310 Mailbox command x%x timeout Data: x%x x%x x%px\n",
+			mb->mbxCommand,
+			phba->pport->port_state,
+			phba->sli.sli_flag,
+			phba->sli.mbox_active);
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Setting state unknown so lpfc_sli_abort_iocb_ring
+	 * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
+	 * it to fail all outstanding SCSI IO.
+	 */
+	set_bit(MBX_TMO_ERR, &phba->bit_flags);
+	spin_lock_irq(&phba->pport->work_port_lock);
+	phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
+	spin_unlock_irq(&phba->pport->work_port_lock);
+	spin_lock_irq(&phba->hbalock);
+	phba->link_state = LPFC_LINK_UNKNOWN;
+	psli->sli_flag &= ~LPFC_SLI_ACTIVE;
+	spin_unlock_irq(&phba->hbalock);
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"0345 Resetting board due to mailbox timeout\n");
+
+	/* Reset the HBA device */
+	lpfc_reset_hba(phba);
+}
+
+/**
+ * lpfc_sli_issue_mbox_s3 - Issue an SLI3 mailbox command to firmware
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This function is called by discovery code and HBA management code
+ * to submit a mailbox command to firmware with SLI-3 interface spec. This
+ * function gets the hbalock to protect the data structures.
+ * The mailbox command can be submitted in polling mode, in which case
+ * this function will wait in a polling loop for the completion of the
+ * mailbox.
+ * If the mailbox is submitted in no_wait mode (not polling) the
+ * function will submit the command and returns immediately without waiting
+ * for the mailbox completion. The no_wait is supported only when HBA
+ * is in SLI2/SLI3 mode - interrupts are enabled.
+ * The SLI interface allows only one mailbox pending at a time. If the
+ * mailbox is issued in polling mode and there is already a mailbox
+ * pending, then the function will return an error. If the mailbox is issued
+ * in NO_WAIT mode and there is a mailbox pending already, the function
+ * will return MBX_BUSY after queuing the mailbox into mailbox queue.
+ * The sli layer owns the mailbox object until the completion of mailbox
+ * command if this function return MBX_BUSY or MBX_SUCCESS. For all other
+ * return codes the caller owns the mailbox command after the return of
+ * the function.
+ **/
+static int
+lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
+		       uint32_t flag)
+{
+	MAILBOX_t *mbx;
+	struct lpfc_sli *psli = &phba->sli;
+	uint32_t status, evtctr;
+	uint32_t ha_copy, hc_copy;
+	int i;
+	unsigned long timeout;
+	unsigned long drvr_flag = 0;
+	uint32_t word0, ldata;
+	void __iomem *to_slim;
+	int processing_queue = 0;
+
+	spin_lock_irqsave(&phba->hbalock, drvr_flag);
+	if (!pmbox) {
+		phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		/* processing mbox queue from intr_handler */
+		if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+			return MBX_SUCCESS;
+		}
+		processing_queue = 1;
+		pmbox = lpfc_mbox_get(phba);
+		if (!pmbox) {
+			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+			return MBX_SUCCESS;
+		}
+	}
+
+	if (pmbox->mbox_cmpl && pmbox->mbox_cmpl != lpfc_sli_def_mbox_cmpl &&
+		pmbox->mbox_cmpl != lpfc_sli_wake_mbox_wait) {
+		if(!pmbox->vport) {
+			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+			lpfc_printf_log(phba, KERN_ERR,
+					LOG_MBOX | LOG_VPORT,
+					"1806 Mbox x%x failed. No vport\n",
+					pmbox->u.mb.mbxCommand);
+			dump_stack();
+			goto out_not_finished;
+		}
+	}
+
+	/* If the PCI channel is in offline state, do not post mbox. */
+	if (unlikely(pci_channel_offline(phba->pcidev))) {
+		spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+		goto out_not_finished;
+	}
+
+	/* If HBA has a deferred error attention, fail the iocb. */
+	if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+		spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+		goto out_not_finished;
+	}
+
+	psli = &phba->sli;
+
+	mbx = &pmbox->u.mb;
+	status = MBX_SUCCESS;
+
+	if (phba->link_state == LPFC_HBA_ERROR) {
+		spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+
+		/* Mbox command <mbxCommand> cannot issue */
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"(%d):0311 Mailbox command x%x cannot "
+				"issue Data: x%x x%x\n",
+				pmbox->vport ? pmbox->vport->vpi : 0,
+				pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
+		goto out_not_finished;
+	}
+
+	if (mbx->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT) {
+		if (lpfc_readl(phba->HCregaddr, &hc_copy) ||
+			!(hc_copy & HC_MBINT_ENA)) {
+			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"(%d):2528 Mailbox command x%x cannot "
+				"issue Data: x%x x%x\n",
+				pmbox->vport ? pmbox->vport->vpi : 0,
+				pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
+			goto out_not_finished;
+		}
+	}
+
+	if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		/* Polling for a mbox command when another one is already active
+		 * is not allowed in SLI. Also, the driver must have established
+		 * SLI2 mode to queue and process multiple mbox commands.
+		 */
+
+		if (flag & MBX_POLL) {
+			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+
+			/* Mbox command <mbxCommand> cannot issue */
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"(%d):2529 Mailbox command x%x "
+					"cannot issue Data: x%x x%x\n",
+					pmbox->vport ? pmbox->vport->vpi : 0,
+					pmbox->u.mb.mbxCommand,
+					psli->sli_flag, flag);
+			goto out_not_finished;
+		}
+
+		if (!(psli->sli_flag & LPFC_SLI_ACTIVE)) {
+			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+			/* Mbox command <mbxCommand> cannot issue */
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"(%d):2530 Mailbox command x%x "
+					"cannot issue Data: x%x x%x\n",
+					pmbox->vport ? pmbox->vport->vpi : 0,
+					pmbox->u.mb.mbxCommand,
+					psli->sli_flag, flag);
+			goto out_not_finished;
+		}
+
+		/* Another mailbox command is still being processed, queue this
+		 * command to be processed later.
+		 */
+		lpfc_mbox_put(phba, pmbox);
+
+		/* Mbox cmd issue - BUSY */
+		lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+				"(%d):0308 Mbox cmd issue - BUSY Data: "
+				"x%x x%x x%x x%x\n",
+				pmbox->vport ? pmbox->vport->vpi : 0xffffff,
+				mbx->mbxCommand,
+				phba->pport ? phba->pport->port_state : 0xff,
+				psli->sli_flag, flag);
+
+		psli->slistat.mbox_busy++;
+		spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+
+		if (pmbox->vport) {
+			lpfc_debugfs_disc_trc(pmbox->vport,
+				LPFC_DISC_TRC_MBOX_VPORT,
+				"MBOX Bsy vport:  cmd:x%x mb:x%x x%x",
+				(uint32_t)mbx->mbxCommand,
+				mbx->un.varWords[0], mbx->un.varWords[1]);
+		}
+		else {
+			lpfc_debugfs_disc_trc(phba->pport,
+				LPFC_DISC_TRC_MBOX,
+				"MBOX Bsy:        cmd:x%x mb:x%x x%x",
+				(uint32_t)mbx->mbxCommand,
+				mbx->un.varWords[0], mbx->un.varWords[1]);
+		}
+
+		return MBX_BUSY;
+	}
+
+	psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+
+	/* If we are not polling, we MUST be in SLI2 mode */
+	if (flag != MBX_POLL) {
+		if (!(psli->sli_flag & LPFC_SLI_ACTIVE) &&
+		    (mbx->mbxCommand != MBX_KILL_BOARD)) {
+			psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+			spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+			/* Mbox command <mbxCommand> cannot issue */
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"(%d):2531 Mailbox command x%x "
+					"cannot issue Data: x%x x%x\n",
+					pmbox->vport ? pmbox->vport->vpi : 0,
+					pmbox->u.mb.mbxCommand,
+					psli->sli_flag, flag);
+			goto out_not_finished;
+		}
+		/* timeout active mbox command */
+		timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox) *
+					   1000);
+		mod_timer(&psli->mbox_tmo, jiffies + timeout);
+	}
+
+	/* Mailbox cmd <cmd> issue */
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0309 Mailbox cmd x%x issue Data: x%x x%x "
+			"x%x\n",
+			pmbox->vport ? pmbox->vport->vpi : 0,
+			mbx->mbxCommand,
+			phba->pport ? phba->pport->port_state : 0xff,
+			psli->sli_flag, flag);
+
+	if (mbx->mbxCommand != MBX_HEARTBEAT) {
+		if (pmbox->vport) {
+			lpfc_debugfs_disc_trc(pmbox->vport,
+				LPFC_DISC_TRC_MBOX_VPORT,
+				"MBOX Send vport: cmd:x%x mb:x%x x%x",
+				(uint32_t)mbx->mbxCommand,
+				mbx->un.varWords[0], mbx->un.varWords[1]);
+		}
+		else {
+			lpfc_debugfs_disc_trc(phba->pport,
+				LPFC_DISC_TRC_MBOX,
+				"MBOX Send:       cmd:x%x mb:x%x x%x",
+				(uint32_t)mbx->mbxCommand,
+				mbx->un.varWords[0], mbx->un.varWords[1]);
+		}
+	}
+
+	psli->slistat.mbox_cmd++;
+	evtctr = psli->slistat.mbox_event;
+
+	/* next set own bit for the adapter and copy over command word */
+	mbx->mbxOwner = OWN_CHIP;
+
+	if (psli->sli_flag & LPFC_SLI_ACTIVE) {
+		/* Populate mbox extension offset word. */
+		if (pmbox->in_ext_byte_len || pmbox->out_ext_byte_len) {
+			*(((uint32_t *)mbx) + pmbox->mbox_offset_word)
+				= (uint8_t *)phba->mbox_ext
+				  - (uint8_t *)phba->mbox;
+		}
+
+		/* Copy the mailbox extension data */
+		if (pmbox->in_ext_byte_len && pmbox->ctx_buf) {
+			lpfc_sli_pcimem_bcopy(pmbox->ctx_buf,
+					      (uint8_t *)phba->mbox_ext,
+					      pmbox->in_ext_byte_len);
+		}
+		/* Copy command data to host SLIM area */
+		lpfc_sli_pcimem_bcopy(mbx, phba->mbox, MAILBOX_CMD_SIZE);
+	} else {
+		/* Populate mbox extension offset word. */
+		if (pmbox->in_ext_byte_len || pmbox->out_ext_byte_len)
+			*(((uint32_t *)mbx) + pmbox->mbox_offset_word)
+				= MAILBOX_HBA_EXT_OFFSET;
+
+		/* Copy the mailbox extension data */
+		if (pmbox->in_ext_byte_len && pmbox->ctx_buf)
+			lpfc_memcpy_to_slim(phba->MBslimaddr +
+				MAILBOX_HBA_EXT_OFFSET,
+				pmbox->ctx_buf, pmbox->in_ext_byte_len);
+
+		if (mbx->mbxCommand == MBX_CONFIG_PORT)
+			/* copy command data into host mbox for cmpl */
+			lpfc_sli_pcimem_bcopy(mbx, phba->mbox,
+					      MAILBOX_CMD_SIZE);
+
+		/* First copy mbox command data to HBA SLIM, skip past first
+		   word */
+		to_slim = phba->MBslimaddr + sizeof (uint32_t);
+		lpfc_memcpy_to_slim(to_slim, &mbx->un.varWords[0],
+			    MAILBOX_CMD_SIZE - sizeof (uint32_t));
+
+		/* Next copy over first word, with mbxOwner set */
+		ldata = *((uint32_t *)mbx);
+		to_slim = phba->MBslimaddr;
+		writel(ldata, to_slim);
+		readl(to_slim); /* flush */
+
+		if (mbx->mbxCommand == MBX_CONFIG_PORT)
+			/* switch over to host mailbox */
+			psli->sli_flag |= LPFC_SLI_ACTIVE;
+	}
+
+	wmb();
+
+	switch (flag) {
+	case MBX_NOWAIT:
+		/* Set up reference to mailbox command */
+		psli->mbox_active = pmbox;
+		/* Interrupt board to do it */
+		writel(CA_MBATT, phba->CAregaddr);
+		readl(phba->CAregaddr); /* flush */
+		/* Don't wait for it to finish, just return */
+		break;
+
+	case MBX_POLL:
+		/* Set up null reference to mailbox command */
+		psli->mbox_active = NULL;
+		/* Interrupt board to do it */
+		writel(CA_MBATT, phba->CAregaddr);
+		readl(phba->CAregaddr); /* flush */
+
+		if (psli->sli_flag & LPFC_SLI_ACTIVE) {
+			/* First read mbox status word */
+			word0 = *((uint32_t *)phba->mbox);
+			word0 = le32_to_cpu(word0);
+		} else {
+			/* First read mbox status word */
+			if (lpfc_readl(phba->MBslimaddr, &word0)) {
+				spin_unlock_irqrestore(&phba->hbalock,
+						       drvr_flag);
+				goto out_not_finished;
+			}
+		}
+
+		/* Read the HBA Host Attention Register */
+		if (lpfc_readl(phba->HAregaddr, &ha_copy)) {
+			spin_unlock_irqrestore(&phba->hbalock,
+						       drvr_flag);
+			goto out_not_finished;
+		}
+		timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, pmbox) *
+							1000) + jiffies;
+		i = 0;
+		/* Wait for command to complete */
+		while (((word0 & OWN_CHIP) == OWN_CHIP) ||
+		       (!(ha_copy & HA_MBATT) &&
+			(phba->link_state > LPFC_WARM_START))) {
+			if (time_after(jiffies, timeout)) {
+				psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+				spin_unlock_irqrestore(&phba->hbalock,
+						       drvr_flag);
+				goto out_not_finished;
+			}
+
+			/* Check if we took a mbox interrupt while we were
+			   polling */
+			if (((word0 & OWN_CHIP) != OWN_CHIP)
+			    && (evtctr != psli->slistat.mbox_event))
+				break;
+
+			if (i++ > 10) {
+				spin_unlock_irqrestore(&phba->hbalock,
+						       drvr_flag);
+				msleep(1);
+				spin_lock_irqsave(&phba->hbalock, drvr_flag);
+			}
+
+			if (psli->sli_flag & LPFC_SLI_ACTIVE) {
+				/* First copy command data */
+				word0 = *((uint32_t *)phba->mbox);
+				word0 = le32_to_cpu(word0);
+				if (mbx->mbxCommand == MBX_CONFIG_PORT) {
+					MAILBOX_t *slimmb;
+					uint32_t slimword0;
+					/* Check real SLIM for any errors */
+					slimword0 = readl(phba->MBslimaddr);
+					slimmb = (MAILBOX_t *) & slimword0;
+					if (((slimword0 & OWN_CHIP) != OWN_CHIP)
+					    && slimmb->mbxStatus) {
+						psli->sli_flag &=
+						    ~LPFC_SLI_ACTIVE;
+						word0 = slimword0;
+					}
+				}
+			} else {
+				/* First copy command data */
+				word0 = readl(phba->MBslimaddr);
+			}
+			/* Read the HBA Host Attention Register */
+			if (lpfc_readl(phba->HAregaddr, &ha_copy)) {
+				spin_unlock_irqrestore(&phba->hbalock,
+						       drvr_flag);
+				goto out_not_finished;
+			}
+		}
+
+		if (psli->sli_flag & LPFC_SLI_ACTIVE) {
+			/* copy results back to user */
+			lpfc_sli_pcimem_bcopy(phba->mbox, mbx,
+						MAILBOX_CMD_SIZE);
+			/* Copy the mailbox extension data */
+			if (pmbox->out_ext_byte_len && pmbox->ctx_buf) {
+				lpfc_sli_pcimem_bcopy(phba->mbox_ext,
+						      pmbox->ctx_buf,
+						      pmbox->out_ext_byte_len);
+			}
+		} else {
+			/* First copy command data */
+			lpfc_memcpy_from_slim(mbx, phba->MBslimaddr,
+						MAILBOX_CMD_SIZE);
+			/* Copy the mailbox extension data */
+			if (pmbox->out_ext_byte_len && pmbox->ctx_buf) {
+				lpfc_memcpy_from_slim(
+					pmbox->ctx_buf,
+					phba->MBslimaddr +
+					MAILBOX_HBA_EXT_OFFSET,
+					pmbox->out_ext_byte_len);
+			}
+		}
+
+		writel(HA_MBATT, phba->HAregaddr);
+		readl(phba->HAregaddr); /* flush */
+
+		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		status = mbx->mbxStatus;
+	}
+
+	spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+	return status;
+
+out_not_finished:
+	if (processing_queue) {
+		pmbox->u.mb.mbxStatus = MBX_NOT_FINISHED;
+		lpfc_mbox_cmpl_put(phba, pmbox);
+	}
+	return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli4_async_mbox_block - Block posting SLI4 asynchronous mailbox command
+ * @phba: Pointer to HBA context object.
+ *
+ * The function blocks the posting of SLI4 asynchronous mailbox commands from
+ * the driver internal pending mailbox queue. It will then try to wait out the
+ * possible outstanding mailbox command before return.
+ *
+ * Returns:
+ * 	0 - the outstanding mailbox command completed; otherwise, the wait for
+ * 	the outstanding mailbox command timed out.
+ **/
+static int
+lpfc_sli4_async_mbox_block(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	LPFC_MBOXQ_t *mboxq;
+	int rc = 0;
+	unsigned long timeout = 0;
+	u32 sli_flag;
+	u8 cmd, subsys, opcode;
+
+	/* Mark the asynchronous mailbox command posting as blocked */
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+	/* Determine how long we might wait for the active mailbox
+	 * command to be gracefully completed by firmware.
+	 */
+	if (phba->sli.mbox_active)
+		timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
+						phba->sli.mbox_active) *
+						1000) + jiffies;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Make sure the mailbox is really active */
+	if (timeout)
+		lpfc_sli4_process_missed_mbox_completions(phba);
+
+	/* Wait for the outstanding mailbox command to complete */
+	while (phba->sli.mbox_active) {
+		/* Check active mailbox complete status every 2ms */
+		msleep(2);
+		if (time_after(jiffies, timeout)) {
+			/* Timeout, mark the outstanding cmd not complete */
+
+			/* Sanity check sli.mbox_active has not completed or
+			 * cancelled from another context during last 2ms sleep,
+			 * so take hbalock to be sure before logging.
+			 */
+			spin_lock_irq(&phba->hbalock);
+			if (phba->sli.mbox_active) {
+				mboxq = phba->sli.mbox_active;
+				cmd = mboxq->u.mb.mbxCommand;
+				subsys = lpfc_sli_config_mbox_subsys_get(phba,
+									 mboxq);
+				opcode = lpfc_sli_config_mbox_opcode_get(phba,
+									 mboxq);
+				sli_flag = psli->sli_flag;
+				spin_unlock_irq(&phba->hbalock);
+				lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+						"2352 Mailbox command x%x "
+						"(x%x/x%x) sli_flag x%x could "
+						"not complete\n",
+						cmd, subsys, opcode,
+						sli_flag);
+			} else {
+				spin_unlock_irq(&phba->hbalock);
+			}
+
+			rc = 1;
+			break;
+		}
+	}
+
+	/* Can not cleanly block async mailbox command, fails it */
+	if (rc) {
+		spin_lock_irq(&phba->hbalock);
+		psli->sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+		spin_unlock_irq(&phba->hbalock);
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_async_mbox_unblock - Block posting SLI4 async mailbox command
+ * @phba: Pointer to HBA context object.
+ *
+ * The function unblocks and resume posting of SLI4 asynchronous mailbox
+ * commands from the driver internal pending mailbox queue. It makes sure
+ * that there is no outstanding mailbox command before resuming posting
+ * asynchronous mailbox commands. If, for any reason, there is outstanding
+ * mailbox command, it will try to wait it out before resuming asynchronous
+ * mailbox command posting.
+ **/
+static void
+lpfc_sli4_async_mbox_unblock(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+
+	spin_lock_irq(&phba->hbalock);
+	if (!(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+		/* Asynchronous mailbox posting is not blocked, do nothing */
+		spin_unlock_irq(&phba->hbalock);
+		return;
+	}
+
+	/* Outstanding synchronous mailbox command is guaranteed to be done,
+	 * successful or timeout, after timing-out the outstanding mailbox
+	 * command shall always be removed, so just unblock posting async
+	 * mailbox command and resume
+	 */
+	psli->sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+	spin_unlock_irq(&phba->hbalock);
+
+	/* wake up worker thread to post asynchronous mailbox command */
+	lpfc_worker_wake_up(phba);
+}
+
+/**
+ * lpfc_sli4_wait_bmbx_ready - Wait for bootstrap mailbox register ready
+ * @phba: Pointer to HBA context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * The function waits for the bootstrap mailbox register ready bit from
+ * port for twice the regular mailbox command timeout value.
+ *
+ *      0 - no timeout on waiting for bootstrap mailbox register ready.
+ *      MBXERR_ERROR - wait for bootstrap mailbox register timed out.
+ **/
+static int
+lpfc_sli4_wait_bmbx_ready(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	uint32_t db_ready;
+	unsigned long timeout;
+	struct lpfc_register bmbx_reg;
+
+	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)
+				   * 1000) + jiffies;
+
+	do {
+		bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+		db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+		if (!db_ready)
+			mdelay(2);
+
+		if (time_after(jiffies, timeout))
+			return MBXERR_ERROR;
+	} while (!db_ready);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli4_post_sync_mbox - Post an SLI4 mailbox to the bootstrap mailbox
+ * @phba: Pointer to HBA context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * The function posts a mailbox to the port.  The mailbox is expected
+ * to be comletely filled in and ready for the port to operate on it.
+ * This routine executes a synchronous completion operation on the
+ * mailbox by polling for its completion.
+ *
+ * The caller must not be holding any locks when calling this routine.
+ *
+ * Returns:
+ *	MBX_SUCCESS - mailbox posted successfully
+ *	Any of the MBX error values.
+ **/
+static int
+lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	int rc = MBX_SUCCESS;
+	unsigned long iflag;
+	uint32_t mcqe_status;
+	uint32_t mbx_cmnd;
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_mqe *mb = &mboxq->u.mqe;
+	struct lpfc_bmbx_create *mbox_rgn;
+	struct dma_address *dma_address;
+
+	/*
+	 * Only one mailbox can be active to the bootstrap mailbox region
+	 * at a time and there is no queueing provided.
+	 */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"(%d):2532 Mailbox command x%x (x%x/x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+				lpfc_sli_config_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, MBX_POLL);
+		return MBXERR_ERROR;
+	}
+	/* The server grabs the token and owns it until release */
+	psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+	phba->sli.mbox_active = mboxq;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+	/* wait for bootstrap mbox register for readyness */
+	rc = lpfc_sli4_wait_bmbx_ready(phba, mboxq);
+	if (rc)
+		goto exit;
+	/*
+	 * Initialize the bootstrap memory region to avoid stale data areas
+	 * in the mailbox post.  Then copy the caller's mailbox contents to
+	 * the bmbx mailbox region.
+	 */
+	mbx_cmnd = bf_get(lpfc_mqe_command, mb);
+	memset(phba->sli4_hba.bmbx.avirt, 0, sizeof(struct lpfc_bmbx_create));
+	lpfc_sli4_pcimem_bcopy(mb, phba->sli4_hba.bmbx.avirt,
+			       sizeof(struct lpfc_mqe));
+
+	/* Post the high mailbox dma address to the port and wait for ready. */
+	dma_address = &phba->sli4_hba.bmbx.dma_address;
+	writel(dma_address->addr_hi, phba->sli4_hba.BMBXregaddr);
+
+	/* wait for bootstrap mbox register for hi-address write done */
+	rc = lpfc_sli4_wait_bmbx_ready(phba, mboxq);
+	if (rc)
+		goto exit;
+
+	/* Post the low mailbox dma address to the port. */
+	writel(dma_address->addr_lo, phba->sli4_hba.BMBXregaddr);
+
+	/* wait for bootstrap mbox register for low address write done */
+	rc = lpfc_sli4_wait_bmbx_ready(phba, mboxq);
+	if (rc)
+		goto exit;
+
+	/*
+	 * Read the CQ to ensure the mailbox has completed.
+	 * If so, update the mailbox status so that the upper layers
+	 * can complete the request normally.
+	 */
+	lpfc_sli4_pcimem_bcopy(phba->sli4_hba.bmbx.avirt, mb,
+			       sizeof(struct lpfc_mqe));
+	mbox_rgn = (struct lpfc_bmbx_create *) phba->sli4_hba.bmbx.avirt;
+	lpfc_sli4_pcimem_bcopy(&mbox_rgn->mcqe, &mboxq->mcqe,
+			       sizeof(struct lpfc_mcqe));
+	mcqe_status = bf_get(lpfc_mcqe_status, &mbox_rgn->mcqe);
+	/*
+	 * When the CQE status indicates a failure and the mailbox status
+	 * indicates success then copy the CQE status into the mailbox status
+	 * (and prefix it with x4000).
+	 */
+	if (mcqe_status != MB_CQE_STATUS_SUCCESS) {
+		if (bf_get(lpfc_mqe_status, mb) == MBX_SUCCESS)
+			bf_set(lpfc_mqe_status, mb,
+			       (LPFC_MBX_ERROR_RANGE | mcqe_status));
+		rc = MBXERR_ERROR;
+	} else
+		lpfc_sli4_swap_str(phba, mboxq);
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0356 Mailbox cmd x%x (x%x/x%x) Status x%x "
+			"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x"
+			" x%x x%x CQ: x%x x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
+			lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+			lpfc_sli_config_mbox_opcode_get(phba, mboxq),
+			bf_get(lpfc_mqe_status, mb),
+			mb->un.mb_words[0], mb->un.mb_words[1],
+			mb->un.mb_words[2], mb->un.mb_words[3],
+			mb->un.mb_words[4], mb->un.mb_words[5],
+			mb->un.mb_words[6], mb->un.mb_words[7],
+			mb->un.mb_words[8], mb->un.mb_words[9],
+			mb->un.mb_words[10], mb->un.mb_words[11],
+			mb->un.mb_words[12], mboxq->mcqe.word0,
+			mboxq->mcqe.mcqe_tag0, 	mboxq->mcqe.mcqe_tag1,
+			mboxq->mcqe.trailer);
+exit:
+	/* We are holding the token, no needed for lock when release */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	phba->sli.mbox_active = NULL;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return rc;
+}
+
+/**
+ * lpfc_sli_issue_mbox_s4 - Issue an SLI4 mailbox command to firmware
+ * @phba: Pointer to HBA context object.
+ * @mboxq: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This function is called by discovery code and HBA management code to submit
+ * a mailbox command to firmware with SLI-4 interface spec.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+static int
+lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+		       uint32_t flag)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	unsigned long iflags;
+	int rc;
+
+	/* dump from issue mailbox command if setup */
+	lpfc_idiag_mbxacc_dump_issue_mbox(phba, &mboxq->u.mb);
+
+	rc = lpfc_mbox_dev_check(phba);
+	if (unlikely(rc)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"(%d):2544 Mailbox command x%x (x%x/x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+				lpfc_sli_config_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		goto out_not_finished;
+	}
+
+	/* Detect polling mode and jump to a handler */
+	if (!phba->sli4_hba.intr_enable) {
+		if (flag == MBX_POLL)
+			rc = lpfc_sli4_post_sync_mbox(phba, mboxq);
+		else
+			rc = -EIO;
+		if (rc != MBX_SUCCESS)
+			lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+					"(%d):2541 Mailbox command x%x "
+					"(x%x/x%x) failure: "
+					"mqe_sta: x%x mcqe_sta: x%x/x%x "
+					"Data: x%x x%x\n",
+					mboxq->vport ? mboxq->vport->vpi : 0,
+					mboxq->u.mb.mbxCommand,
+					lpfc_sli_config_mbox_subsys_get(phba,
+									mboxq),
+					lpfc_sli_config_mbox_opcode_get(phba,
+									mboxq),
+					bf_get(lpfc_mqe_status, &mboxq->u.mqe),
+					bf_get(lpfc_mcqe_status, &mboxq->mcqe),
+					bf_get(lpfc_mcqe_ext_status,
+					       &mboxq->mcqe),
+					psli->sli_flag, flag);
+		return rc;
+	} else if (flag == MBX_POLL) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+				"(%d):2542 Try to issue mailbox command "
+				"x%x (x%x/x%x) synchronously ahead of async "
+				"mailbox command queue: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+				lpfc_sli_config_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		/* Try to block the asynchronous mailbox posting */
+		rc = lpfc_sli4_async_mbox_block(phba);
+		if (!rc) {
+			/* Successfully blocked, now issue sync mbox cmd */
+			rc = lpfc_sli4_post_sync_mbox(phba, mboxq);
+			if (rc != MBX_SUCCESS)
+				lpfc_printf_log(phba, KERN_WARNING,
+					LOG_MBOX | LOG_SLI,
+					"(%d):2597 Sync Mailbox command "
+					"x%x (x%x/x%x) failure: "
+					"mqe_sta: x%x mcqe_sta: x%x/x%x "
+					"Data: x%x x%x\n",
+					mboxq->vport ? mboxq->vport->vpi : 0,
+					mboxq->u.mb.mbxCommand,
+					lpfc_sli_config_mbox_subsys_get(phba,
+									mboxq),
+					lpfc_sli_config_mbox_opcode_get(phba,
+									mboxq),
+					bf_get(lpfc_mqe_status, &mboxq->u.mqe),
+					bf_get(lpfc_mcqe_status, &mboxq->mcqe),
+					bf_get(lpfc_mcqe_ext_status,
+					       &mboxq->mcqe),
+					psli->sli_flag, flag);
+			/* Unblock the async mailbox posting afterward */
+			lpfc_sli4_async_mbox_unblock(phba);
+		}
+		return rc;
+	}
+
+	/* Now, interrupt mode asynchronous mailbox command */
+	rc = lpfc_mbox_cmd_check(phba, mboxq);
+	if (rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"(%d):2543 Mailbox command x%x (x%x/x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+				lpfc_sli_config_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, flag);
+		goto out_not_finished;
+	}
+
+	/* Put the mailbox command to the driver internal FIFO */
+	psli->slistat.mbox_busy++;
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	lpfc_mbox_put(phba, mboxq);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0354 Mbox cmd issue - Enqueue Data: "
+			"x%x (x%x/x%x) x%x x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0xffffff,
+			bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+			lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+			lpfc_sli_config_mbox_opcode_get(phba, mboxq),
+			phba->pport->port_state,
+			psli->sli_flag, MBX_NOWAIT);
+	/* Wake up worker thread to transport mailbox command from head */
+	lpfc_worker_wake_up(phba);
+
+	return MBX_BUSY;
+
+out_not_finished:
+	return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli4_post_async_mbox - Post an SLI4 mailbox command to device
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called by worker thread to send a mailbox command to
+ * SLI4 HBA firmware.
+ *
+ **/
+int
+lpfc_sli4_post_async_mbox(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	LPFC_MBOXQ_t *mboxq;
+	int rc = MBX_SUCCESS;
+	unsigned long iflags;
+	struct lpfc_mqe *mqe;
+	uint32_t mbx_cmnd;
+
+	/* Check interrupt mode before post async mailbox command */
+	if (unlikely(!phba->sli4_hba.intr_enable))
+		return MBX_NOT_FINISHED;
+
+	/* Check for mailbox command service token */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_NOT_FINISHED;
+	}
+	if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_NOT_FINISHED;
+	}
+	if (unlikely(phba->sli.mbox_active)) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0384 There is pending active mailbox cmd\n");
+		return MBX_NOT_FINISHED;
+	}
+	/* Take the mailbox command service token */
+	psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+
+	/* Get the next mailbox command from head of queue */
+	mboxq = lpfc_mbox_get(phba);
+
+	/* If no more mailbox command waiting for post, we're done */
+	if (!mboxq) {
+		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return MBX_SUCCESS;
+	}
+	phba->sli.mbox_active = mboxq;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	/* Check device readiness for posting mailbox command */
+	rc = lpfc_mbox_dev_check(phba);
+	if (unlikely(rc))
+		/* Driver clean routine will clean up pending mailbox */
+		goto out_not_finished;
+
+	/* Prepare the mbox command to be posted */
+	mqe = &mboxq->u.mqe;
+	mbx_cmnd = bf_get(lpfc_mqe_command, mqe);
+
+	/* Start timer for the mbox_tmo and log some mailbox post messages */
+	mod_timer(&psli->mbox_tmo, (jiffies +
+		  msecs_to_jiffies(1000 * lpfc_mbox_tmo_val(phba, mboxq))));
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"(%d):0355 Mailbox cmd x%x (x%x/x%x) issue Data: "
+			"x%x x%x\n",
+			mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
+			lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+			lpfc_sli_config_mbox_opcode_get(phba, mboxq),
+			phba->pport->port_state, psli->sli_flag);
+
+	if (mbx_cmnd != MBX_HEARTBEAT) {
+		if (mboxq->vport) {
+			lpfc_debugfs_disc_trc(mboxq->vport,
+				LPFC_DISC_TRC_MBOX_VPORT,
+				"MBOX Send vport: cmd:x%x mb:x%x x%x",
+				mbx_cmnd, mqe->un.mb_words[0],
+				mqe->un.mb_words[1]);
+		} else {
+			lpfc_debugfs_disc_trc(phba->pport,
+				LPFC_DISC_TRC_MBOX,
+				"MBOX Send: cmd:x%x mb:x%x x%x",
+				mbx_cmnd, mqe->un.mb_words[0],
+				mqe->un.mb_words[1]);
+		}
+	}
+	psli->slistat.mbox_cmd++;
+
+	/* Post the mailbox command to the port */
+	rc = lpfc_sli4_mq_put(phba->sli4_hba.mbx_wq, mqe);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"(%d):2533 Mailbox command x%x (x%x/x%x) "
+				"cannot issue Data: x%x x%x\n",
+				mboxq->vport ? mboxq->vport->vpi : 0,
+				mboxq->u.mb.mbxCommand,
+				lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+				lpfc_sli_config_mbox_opcode_get(phba, mboxq),
+				psli->sli_flag, MBX_NOWAIT);
+		goto out_not_finished;
+	}
+
+	return rc;
+
+out_not_finished:
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	if (phba->sli.mbox_active) {
+		mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+		__lpfc_mbox_cmpl_put(phba, mboxq);
+		/* Release the token */
+		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		phba->sli.mbox_active = NULL;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli_issue_mbox - Wrapper func for issuing mailbox command
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This routine wraps the actual SLI3 or SLI4 mailbox issuing routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+int
+lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
+{
+	return phba->lpfc_sli_issue_mbox(phba, pmbox, flag);
+}
+
+/**
+ * lpfc_mbox_api_table_setup - Set up mbox api function jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the mbox interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_mbox_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s3;
+		phba->lpfc_sli_handle_slow_ring_event =
+				lpfc_sli_handle_slow_ring_event_s3;
+		phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s3;
+		phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s3;
+		phba->lpfc_sli_brdready = lpfc_sli_brdready_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s4;
+		phba->lpfc_sli_handle_slow_ring_event =
+				lpfc_sli_handle_slow_ring_event_s4;
+		phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s4;
+		phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s4;
+		phba->lpfc_sli_brdready = lpfc_sli_brdready_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1420 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+/**
+ * __lpfc_sli_ringtx_put - Add an iocb to the txq
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @piocb: Pointer to address of newly added command iocb.
+ *
+ * This function is called with hbalock held for SLI3 ports or
+ * the ring lock held for SLI4 ports to add a command
+ * iocb to the txq when SLI layer cannot submit the command iocb
+ * to the ring.
+ **/
+void
+__lpfc_sli_ringtx_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+		    struct lpfc_iocbq *piocb)
+{
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		lockdep_assert_held(&pring->ring_lock);
+	else
+		lockdep_assert_held(&phba->hbalock);
+	/* Insert the caller's iocb in the txq tail for later processing. */
+	list_add_tail(&piocb->list, &pring->txq);
+}
+
+/**
+ * lpfc_sli_next_iocb - Get the next iocb in the txq
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @piocb: Pointer to address of newly added command iocb.
+ *
+ * This function is called with hbalock held before a new
+ * iocb is submitted to the firmware. This function checks
+ * txq to flush the iocbs in txq to Firmware before
+ * submitting new iocbs to the Firmware.
+ * If there are iocbs in the txq which need to be submitted
+ * to firmware, lpfc_sli_next_iocb returns the first element
+ * of the txq after dequeuing it from txq.
+ * If there is no iocb in the txq then the function will return
+ * *piocb and *piocb is set to NULL. Caller needs to check
+ * *piocb to find if there are more commands in the txq.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+		   struct lpfc_iocbq **piocb)
+{
+	struct lpfc_iocbq * nextiocb;
+
+	lockdep_assert_held(&phba->hbalock);
+
+	nextiocb = lpfc_sli_ringtx_get(phba, pring);
+	if (!nextiocb) {
+		nextiocb = *piocb;
+		*piocb = NULL;
+	}
+
+	return nextiocb;
+}
+
+/**
+ * __lpfc_sli_issue_iocb_s3 - SLI3 device lockless ver of lpfc_sli_issue_iocb
+ * @phba: Pointer to HBA context object.
+ * @ring_number: SLI ring number to issue iocb on.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * __lpfc_sli_issue_iocb_s3 is used by other functions in the driver to issue
+ * an iocb command to an HBA with SLI-3 interface spec. If the PCI slot is
+ * recovering from error state, if HBA is resetting or if LPFC_STOP_IOCB_EVENT
+ * flag is turned on, the function returns IOCB_ERROR. When the link is down,
+ * this function allows only iocbs for posting buffers. This function finds
+ * next available slot in the command ring and posts the command to the
+ * available slot and writes the port attention register to request HBA start
+ * processing new iocb. If there is no slot available in the ring and
+ * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the txq, otherwise
+ * the function returns IOCB_BUSY.
+ *
+ * This function is called with hbalock held. The function will return success
+ * after it successfully submit the iocb to firmware or after adding to the
+ * txq.
+ **/
+static int
+__lpfc_sli_issue_iocb_s3(struct lpfc_hba *phba, uint32_t ring_number,
+		    struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	struct lpfc_iocbq *nextiocb;
+	IOCB_t *iocb;
+	struct lpfc_sli_ring *pring = &phba->sli.sli3_ring[ring_number];
+
+	lockdep_assert_held(&phba->hbalock);
+
+	if (piocb->cmd_cmpl && (!piocb->vport) &&
+	   (piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) &&
+	   (piocb->iocb.ulpCommand != CMD_CLOSE_XRI_CN)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"1807 IOCB x%x failed. No vport\n",
+				piocb->iocb.ulpCommand);
+		dump_stack();
+		return IOCB_ERROR;
+	}
+
+
+	/* If the PCI channel is in offline state, do not post iocbs. */
+	if (unlikely(pci_channel_offline(phba->pcidev)))
+		return IOCB_ERROR;
+
+	/* If HBA has a deferred error attention, fail the iocb. */
+	if (unlikely(phba->hba_flag & DEFER_ERATT))
+		return IOCB_ERROR;
+
+	/*
+	 * We should never get an IOCB if we are in a < LINK_DOWN state
+	 */
+	if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+		return IOCB_ERROR;
+
+	/*
+	 * Check to see if we are blocking IOCB processing because of a
+	 * outstanding event.
+	 */
+	if (unlikely(pring->flag & LPFC_STOP_IOCB_EVENT))
+		goto iocb_busy;
+
+	if (unlikely(phba->link_state == LPFC_LINK_DOWN)) {
+		/*
+		 * Only CREATE_XRI, CLOSE_XRI, and QUE_RING_BUF
+		 * can be issued if the link is not up.
+		 */
+		switch (piocb->iocb.ulpCommand) {
+		case CMD_QUE_RING_BUF_CN:
+		case CMD_QUE_RING_BUF64_CN:
+			/*
+			 * For IOCBs, like QUE_RING_BUF, that have no rsp ring
+			 * completion, cmd_cmpl MUST be 0.
+			 */
+			if (piocb->cmd_cmpl)
+				piocb->cmd_cmpl = NULL;
+			fallthrough;
+		case CMD_CREATE_XRI_CR:
+		case CMD_CLOSE_XRI_CN:
+		case CMD_CLOSE_XRI_CX:
+			break;
+		default:
+			goto iocb_busy;
+		}
+
+	/*
+	 * For FCP commands, we must be in a state where we can process link
+	 * attention events.
+	 */
+	} else if (unlikely(pring->ringno == LPFC_FCP_RING &&
+			    !(phba->sli.sli_flag & LPFC_PROCESS_LA))) {
+		goto iocb_busy;
+	}
+
+	while ((iocb = lpfc_sli_next_iocb_slot(phba, pring)) &&
+	       (nextiocb = lpfc_sli_next_iocb(phba, pring, &piocb)))
+		lpfc_sli_submit_iocb(phba, pring, iocb, nextiocb);
+
+	if (iocb)
+		lpfc_sli_update_ring(phba, pring);
+	else
+		lpfc_sli_update_full_ring(phba, pring);
+
+	if (!piocb)
+		return IOCB_SUCCESS;
+
+	goto out_busy;
+
+ iocb_busy:
+	pring->stats.iocb_cmd_delay++;
+
+ out_busy:
+
+	if (!(flag & SLI_IOCB_RET_IOCB)) {
+		__lpfc_sli_ringtx_put(phba, pring, piocb);
+		return IOCB_SUCCESS;
+	}
+
+	return IOCB_BUSY;
+}
+
+/**
+ * __lpfc_sli_issue_fcp_io_s3 - SLI3 device for sending fcp io iocb
+ * @phba: Pointer to HBA context object.
+ * @ring_number: SLI ring number to issue wqe on.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * __lpfc_sli_issue_fcp_io_s3 is wrapper function to invoke lockless func to
+ * send  an iocb command to an HBA with SLI-3 interface spec.
+ *
+ * This function takes the hbalock before invoking the lockless version.
+ * The function will return success after it successfully submit the wqe to
+ * firmware or after adding to the txq.
+ **/
+static int
+__lpfc_sli_issue_fcp_io_s3(struct lpfc_hba *phba, uint32_t ring_number,
+			   struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	unsigned long iflags;
+	int rc;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	rc = __lpfc_sli_issue_iocb_s3(phba, ring_number, piocb, flag);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	return rc;
+}
+
+/**
+ * __lpfc_sli_issue_fcp_io_s4 - SLI4 device for sending fcp io wqe
+ * @phba: Pointer to HBA context object.
+ * @ring_number: SLI ring number to issue wqe on.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * __lpfc_sli_issue_fcp_io_s4 is used by other functions in the driver to issue
+ * an wqe command to an HBA with SLI-4 interface spec.
+ *
+ * This function is a lockless version. The function will return success
+ * after it successfully submit the wqe to firmware or after adding to the
+ * txq.
+ **/
+static int
+__lpfc_sli_issue_fcp_io_s4(struct lpfc_hba *phba, uint32_t ring_number,
+			   struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	struct lpfc_io_buf *lpfc_cmd = piocb->io_buf;
+
+	lpfc_prep_embed_io(phba, lpfc_cmd);
+	return lpfc_sli4_issue_wqe(phba, lpfc_cmd->hdwq, piocb);
+}
+
+void
+lpfc_prep_embed_io(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_cmd)
+{
+	struct lpfc_iocbq *piocb = &lpfc_cmd->cur_iocbq;
+	union lpfc_wqe128 *wqe = &lpfc_cmd->cur_iocbq.wqe;
+	struct sli4_sge *sgl;
+
+	/* 128 byte wqe support here */
+	sgl = (struct sli4_sge *)lpfc_cmd->dma_sgl;
+
+	if (phba->fcp_embed_io) {
+		struct fcp_cmnd *fcp_cmnd;
+		u32 *ptr;
+
+		fcp_cmnd = lpfc_cmd->fcp_cmnd;
+
+		/* Word 0-2 - FCP_CMND */
+		wqe->generic.bde.tus.f.bdeFlags =
+			BUFF_TYPE_BDE_IMMED;
+		wqe->generic.bde.tus.f.bdeSize = sgl->sge_len;
+		wqe->generic.bde.addrHigh = 0;
+		wqe->generic.bde.addrLow =  88;  /* Word 22 */
+
+		bf_set(wqe_wqes, &wqe->fcp_iwrite.wqe_com, 1);
+		bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 0);
+
+		/* Word 22-29  FCP CMND Payload */
+		ptr = &wqe->words[22];
+		memcpy(ptr, fcp_cmnd, sizeof(struct fcp_cmnd));
+	} else {
+		/* Word 0-2 - Inline BDE */
+		wqe->generic.bde.tus.f.bdeFlags =  BUFF_TYPE_BDE_64;
+		wqe->generic.bde.tus.f.bdeSize = sizeof(struct fcp_cmnd);
+		wqe->generic.bde.addrHigh = sgl->addr_hi;
+		wqe->generic.bde.addrLow =  sgl->addr_lo;
+
+		/* Word 10 */
+		bf_set(wqe_dbde, &wqe->generic.wqe_com, 1);
+		bf_set(wqe_wqes, &wqe->generic.wqe_com, 0);
+	}
+
+	/* add the VMID tags as per switch response */
+	if (unlikely(piocb->cmd_flag & LPFC_IO_VMID)) {
+		if (phba->pport->vmid_flag & LPFC_VMID_TYPE_PRIO) {
+			bf_set(wqe_ccpe, &wqe->fcp_iwrite.wqe_com, 1);
+			bf_set(wqe_ccp, &wqe->fcp_iwrite.wqe_com,
+					(piocb->vmid_tag.cs_ctl_vmid));
+		} else if (phba->cfg_vmid_app_header) {
+			bf_set(wqe_appid, &wqe->fcp_iwrite.wqe_com, 1);
+			bf_set(wqe_wqes, &wqe->fcp_iwrite.wqe_com, 1);
+			wqe->words[31] = piocb->vmid_tag.app_id;
+		}
+	}
+}
+
+/**
+ * __lpfc_sli_issue_iocb_s4 - SLI4 device lockless ver of lpfc_sli_issue_iocb
+ * @phba: Pointer to HBA context object.
+ * @ring_number: SLI ring number to issue iocb on.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * __lpfc_sli_issue_iocb_s4 is used by other functions in the driver to issue
+ * an iocb command to an HBA with SLI-4 interface spec.
+ *
+ * This function is called with ringlock held. The function will return success
+ * after it successfully submit the iocb to firmware or after adding to the
+ * txq.
+ **/
+static int
+__lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
+			 struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	struct lpfc_sglq *sglq;
+	union lpfc_wqe128 *wqe;
+	struct lpfc_queue *wq;
+	struct lpfc_sli_ring *pring;
+	u32 ulp_command = get_job_cmnd(phba, piocb);
+
+	/* Get the WQ */
+	if ((piocb->cmd_flag & LPFC_IO_FCP) ||
+	    (piocb->cmd_flag & LPFC_USE_FCPWQIDX)) {
+		wq = phba->sli4_hba.hdwq[piocb->hba_wqidx].io_wq;
+	} else {
+		wq = phba->sli4_hba.els_wq;
+	}
+
+	/* Get corresponding ring */
+	pring = wq->pring;
+
+	/*
+	 * The WQE can be either 64 or 128 bytes,
+	 */
+
+	lockdep_assert_held(&pring->ring_lock);
+	wqe = &piocb->wqe;
+	if (piocb->sli4_xritag == NO_XRI) {
+		if (ulp_command == CMD_ABORT_XRI_CX)
+			sglq = NULL;
+		else {
+			sglq = __lpfc_sli_get_els_sglq(phba, piocb);
+			if (!sglq) {
+				if (!(flag & SLI_IOCB_RET_IOCB)) {
+					__lpfc_sli_ringtx_put(phba,
+							pring,
+							piocb);
+					return IOCB_SUCCESS;
+				} else {
+					return IOCB_BUSY;
+				}
+			}
+		}
+	} else if (piocb->cmd_flag &  LPFC_IO_FCP) {
+		/* These IO's already have an XRI and a mapped sgl. */
+		sglq = NULL;
+	}
+	else {
+		/*
+		 * This is a continuation of a commandi,(CX) so this
+		 * sglq is on the active list
+		 */
+		sglq = __lpfc_get_active_sglq(phba, piocb->sli4_lxritag);
+		if (!sglq)
+			return IOCB_ERROR;
+	}
+
+	if (sglq) {
+		piocb->sli4_lxritag = sglq->sli4_lxritag;
+		piocb->sli4_xritag = sglq->sli4_xritag;
+
+		/* ABTS sent by initiator to CT exchange, the
+		 * RX_ID field will be filled with the newly
+		 * allocated responder XRI.
+		 */
+		if (ulp_command == CMD_XMIT_BLS_RSP64_CX &&
+		    piocb->abort_bls == LPFC_ABTS_UNSOL_INT)
+			bf_set(xmit_bls_rsp64_rxid, &wqe->xmit_bls_rsp,
+			       piocb->sli4_xritag);
+
+		bf_set(wqe_xri_tag, &wqe->generic.wqe_com,
+		       piocb->sli4_xritag);
+
+		if (lpfc_wqe_bpl2sgl(phba, piocb, sglq) == NO_XRI)
+			return IOCB_ERROR;
+	}
+
+	if (lpfc_sli4_wq_put(wq, wqe))
+		return IOCB_ERROR;
+
+	lpfc_sli_ringtxcmpl_put(phba, pring, piocb);
+
+	return 0;
+}
+
+/*
+ * lpfc_sli_issue_fcp_io - Wrapper func for issuing fcp i/o
+ *
+ * This routine wraps the actual fcp i/o function for issusing WQE for sli-4
+ * or IOCB for sli-3  function.
+ * pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * IOCB_ERROR - Error
+ * IOCB_SUCCESS - Success
+ * IOCB_BUSY - Busy
+ **/
+int
+lpfc_sli_issue_fcp_io(struct lpfc_hba *phba, uint32_t ring_number,
+		      struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	return phba->__lpfc_sli_issue_fcp_io(phba, ring_number, piocb, flag);
+}
+
+/*
+ * __lpfc_sli_issue_iocb - Wrapper func of lockless version for issuing iocb
+ *
+ * This routine wraps the actual lockless version for issusing IOCB function
+ * pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * IOCB_ERROR - Error
+ * IOCB_SUCCESS - Success
+ * IOCB_BUSY - Busy
+ **/
+int
+__lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
+		struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	return phba->__lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+}
+
+static void
+__lpfc_sli_prep_els_req_rsp_s3(struct lpfc_iocbq *cmdiocbq,
+			       struct lpfc_vport *vport,
+			       struct lpfc_dmabuf *bmp, u16 cmd_size, u32 did,
+			       u32 elscmd, u8 tmo, u8 expect_rsp)
+{
+	struct lpfc_hba *phba = vport->phba;
+	IOCB_t *cmd;
+
+	cmd = &cmdiocbq->iocb;
+	memset(cmd, 0, sizeof(*cmd));
+
+	cmd->un.elsreq64.bdl.addrHigh = putPaddrHigh(bmp->phys);
+	cmd->un.elsreq64.bdl.addrLow = putPaddrLow(bmp->phys);
+	cmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+
+	if (expect_rsp) {
+		cmd->un.elsreq64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
+		cmd->un.elsreq64.remoteID = did; /* DID */
+		cmd->ulpCommand = CMD_ELS_REQUEST64_CR;
+		cmd->ulpTimeout = tmo;
+	} else {
+		cmd->un.elsreq64.bdl.bdeSize = sizeof(struct ulp_bde64);
+		cmd->un.genreq64.xmit_els_remoteID = did; /* DID */
+		cmd->ulpCommand = CMD_XMIT_ELS_RSP64_CX;
+		cmd->ulpPU = PARM_NPIV_DID;
+	}
+	cmd->ulpBdeCount = 1;
+	cmd->ulpLe = 1;
+	cmd->ulpClass = CLASS3;
+
+	/* If we have NPIV enabled, we want to send ELS traffic by VPI. */
+	if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
+		if (expect_rsp) {
+			cmd->un.elsreq64.myID = vport->fc_myDID;
+
+			/* For ELS_REQUEST64_CR, use the VPI by default */
+			cmd->ulpContext = phba->vpi_ids[vport->vpi];
+		}
+
+		cmd->ulpCt_h = 0;
+		/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
+		if (elscmd == ELS_CMD_ECHO)
+			cmd->ulpCt_l = 0; /* context = invalid RPI */
+		else
+			cmd->ulpCt_l = 1; /* context = VPI */
+	}
+}
+
+static void
+__lpfc_sli_prep_els_req_rsp_s4(struct lpfc_iocbq *cmdiocbq,
+			       struct lpfc_vport *vport,
+			       struct lpfc_dmabuf *bmp, u16 cmd_size, u32 did,
+			       u32 elscmd, u8 tmo, u8 expect_rsp)
+{
+	struct lpfc_hba  *phba = vport->phba;
+	union lpfc_wqe128 *wqe;
+	struct ulp_bde64_le *bde;
+	u8 els_id;
+
+	wqe = &cmdiocbq->wqe;
+	memset(wqe, 0, sizeof(*wqe));
+
+	/* Word 0 - 2 BDE */
+	bde = (struct ulp_bde64_le *)&wqe->generic.bde;
+	bde->addr_low = cpu_to_le32(putPaddrLow(bmp->phys));
+	bde->addr_high = cpu_to_le32(putPaddrHigh(bmp->phys));
+	bde->type_size = cpu_to_le32(cmd_size);
+	bde->type_size |= cpu_to_le32(ULP_BDE64_TYPE_BDE_64);
+
+	if (expect_rsp) {
+		bf_set(wqe_cmnd, &wqe->els_req.wqe_com, CMD_ELS_REQUEST64_WQE);
+
+		/* Transfer length */
+		wqe->els_req.payload_len = cmd_size;
+		wqe->els_req.max_response_payload_len = FCELSSIZE;
+
+		/* DID */
+		bf_set(wqe_els_did, &wqe->els_req.wqe_dest, did);
+
+		/* Word 11 - ELS_ID */
+		switch (elscmd) {
+		case ELS_CMD_PLOGI:
+			els_id = LPFC_ELS_ID_PLOGI;
+			break;
+		case ELS_CMD_FLOGI:
+			els_id = LPFC_ELS_ID_FLOGI;
+			break;
+		case ELS_CMD_LOGO:
+			els_id = LPFC_ELS_ID_LOGO;
+			break;
+		case ELS_CMD_FDISC:
+			if (!vport->fc_myDID) {
+				els_id = LPFC_ELS_ID_FDISC;
+				break;
+			}
+			fallthrough;
+		default:
+			els_id = LPFC_ELS_ID_DEFAULT;
+			break;
+		}
+
+		bf_set(wqe_els_id, &wqe->els_req.wqe_com, els_id);
+	} else {
+		/* DID */
+		bf_set(wqe_els_did, &wqe->xmit_els_rsp.wqe_dest, did);
+
+		/* Transfer length */
+		wqe->xmit_els_rsp.response_payload_len = cmd_size;
+
+		bf_set(wqe_cmnd, &wqe->xmit_els_rsp.wqe_com,
+		       CMD_XMIT_ELS_RSP64_WQE);
+	}
+
+	bf_set(wqe_tmo, &wqe->generic.wqe_com, tmo);
+	bf_set(wqe_reqtag, &wqe->generic.wqe_com, cmdiocbq->iotag);
+	bf_set(wqe_class, &wqe->generic.wqe_com, CLASS3);
+
+	/* If we have NPIV enabled, we want to send ELS traffic by VPI.
+	 * For SLI4, since the driver controls VPIs we also want to include
+	 * all ELS pt2pt protocol traffic as well.
+	 */
+	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) ||
+	    (vport->fc_flag & FC_PT2PT)) {
+		if (expect_rsp) {
+			bf_set(els_req64_sid, &wqe->els_req, vport->fc_myDID);
+
+			/* For ELS_REQUEST64_WQE, use the VPI by default */
+			bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com,
+			       phba->vpi_ids[vport->vpi]);
+		}
+
+		/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
+		if (elscmd == ELS_CMD_ECHO)
+			bf_set(wqe_ct, &wqe->generic.wqe_com, 0);
+		else
+			bf_set(wqe_ct, &wqe->generic.wqe_com, 1);
+	}
+}
+
+void
+lpfc_sli_prep_els_req_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocbq,
+			  struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
+			  u16 cmd_size, u32 did, u32 elscmd, u8 tmo,
+			  u8 expect_rsp)
+{
+	phba->__lpfc_sli_prep_els_req_rsp(cmdiocbq, vport, bmp, cmd_size, did,
+					  elscmd, tmo, expect_rsp);
+}
+
+static void
+__lpfc_sli_prep_gen_req_s3(struct lpfc_iocbq *cmdiocbq, struct lpfc_dmabuf *bmp,
+			   u16 rpi, u32 num_entry, u8 tmo)
+{
+	IOCB_t *cmd;
+
+	cmd = &cmdiocbq->iocb;
+	memset(cmd, 0, sizeof(*cmd));
+
+	cmd->un.genreq64.bdl.addrHigh = putPaddrHigh(bmp->phys);
+	cmd->un.genreq64.bdl.addrLow = putPaddrLow(bmp->phys);
+	cmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+	cmd->un.genreq64.bdl.bdeSize = num_entry * sizeof(struct ulp_bde64);
+
+	cmd->un.genreq64.w5.hcsw.Rctl = FC_RCTL_DD_UNSOL_CTL;
+	cmd->un.genreq64.w5.hcsw.Type = FC_TYPE_CT;
+	cmd->un.genreq64.w5.hcsw.Fctl = (SI | LA);
+
+	cmd->ulpContext = rpi;
+	cmd->ulpClass = CLASS3;
+	cmd->ulpCommand = CMD_GEN_REQUEST64_CR;
+	cmd->ulpBdeCount = 1;
+	cmd->ulpLe = 1;
+	cmd->ulpOwner = OWN_CHIP;
+	cmd->ulpTimeout = tmo;
+}
+
+static void
+__lpfc_sli_prep_gen_req_s4(struct lpfc_iocbq *cmdiocbq, struct lpfc_dmabuf *bmp,
+			   u16 rpi, u32 num_entry, u8 tmo)
+{
+	union lpfc_wqe128 *cmdwqe;
+	struct ulp_bde64_le *bde, *bpl;
+	u32 xmit_len = 0, total_len = 0, size, type, i;
+
+	cmdwqe = &cmdiocbq->wqe;
+	memset(cmdwqe, 0, sizeof(*cmdwqe));
+
+	/* Calculate total_len and xmit_len */
+	bpl = (struct ulp_bde64_le *)bmp->virt;
+	for (i = 0; i < num_entry; i++) {
+		size = le32_to_cpu(bpl[i].type_size) & ULP_BDE64_SIZE_MASK;
+		total_len += size;
+	}
+	for (i = 0; i < num_entry; i++) {
+		size = le32_to_cpu(bpl[i].type_size) & ULP_BDE64_SIZE_MASK;
+		type = le32_to_cpu(bpl[i].type_size) & ULP_BDE64_TYPE_MASK;
+		if (type != ULP_BDE64_TYPE_BDE_64)
+			break;
+		xmit_len += size;
+	}
+
+	/* Words 0 - 2 */
+	bde = (struct ulp_bde64_le *)&cmdwqe->generic.bde;
+	bde->addr_low = bpl->addr_low;
+	bde->addr_high = bpl->addr_high;
+	bde->type_size = cpu_to_le32(xmit_len);
+	bde->type_size |= cpu_to_le32(ULP_BDE64_TYPE_BDE_64);
+
+	/* Word 3 */
+	cmdwqe->gen_req.request_payload_len = xmit_len;
+
+	/* Word 5 */
+	bf_set(wqe_type, &cmdwqe->gen_req.wge_ctl, FC_TYPE_CT);
+	bf_set(wqe_rctl, &cmdwqe->gen_req.wge_ctl, FC_RCTL_DD_UNSOL_CTL);
+	bf_set(wqe_si, &cmdwqe->gen_req.wge_ctl, 1);
+	bf_set(wqe_la, &cmdwqe->gen_req.wge_ctl, 1);
+
+	/* Word 6 */
+	bf_set(wqe_ctxt_tag, &cmdwqe->gen_req.wqe_com, rpi);
+
+	/* Word 7 */
+	bf_set(wqe_tmo, &cmdwqe->gen_req.wqe_com, tmo);
+	bf_set(wqe_class, &cmdwqe->gen_req.wqe_com, CLASS3);
+	bf_set(wqe_cmnd, &cmdwqe->gen_req.wqe_com, CMD_GEN_REQUEST64_CR);
+	bf_set(wqe_ct, &cmdwqe->gen_req.wqe_com, SLI4_CT_RPI);
+
+	/* Word 12 */
+	cmdwqe->gen_req.max_response_payload_len = total_len - xmit_len;
+}
+
+void
+lpfc_sli_prep_gen_req(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocbq,
+		      struct lpfc_dmabuf *bmp, u16 rpi, u32 num_entry, u8 tmo)
+{
+	phba->__lpfc_sli_prep_gen_req(cmdiocbq, bmp, rpi, num_entry, tmo);
+}
+
+static void
+__lpfc_sli_prep_xmit_seq64_s3(struct lpfc_iocbq *cmdiocbq,
+			      struct lpfc_dmabuf *bmp, u16 rpi, u16 ox_id,
+			      u32 num_entry, u8 rctl, u8 last_seq, u8 cr_cx_cmd)
+{
+	IOCB_t *icmd;
+
+	icmd = &cmdiocbq->iocb;
+	memset(icmd, 0, sizeof(*icmd));
+
+	icmd->un.xseq64.bdl.addrHigh = putPaddrHigh(bmp->phys);
+	icmd->un.xseq64.bdl.addrLow = putPaddrLow(bmp->phys);
+	icmd->un.xseq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+	icmd->un.xseq64.bdl.bdeSize = (num_entry * sizeof(struct ulp_bde64));
+	icmd->un.xseq64.w5.hcsw.Fctl = LA;
+	if (last_seq)
+		icmd->un.xseq64.w5.hcsw.Fctl |= LS;
+	icmd->un.xseq64.w5.hcsw.Dfctl = 0;
+	icmd->un.xseq64.w5.hcsw.Rctl = rctl;
+	icmd->un.xseq64.w5.hcsw.Type = FC_TYPE_CT;
+
+	icmd->ulpBdeCount = 1;
+	icmd->ulpLe = 1;
+	icmd->ulpClass = CLASS3;
+
+	switch (cr_cx_cmd) {
+	case CMD_XMIT_SEQUENCE64_CR:
+		icmd->ulpContext = rpi;
+		icmd->ulpCommand = CMD_XMIT_SEQUENCE64_CR;
+		break;
+	case CMD_XMIT_SEQUENCE64_CX:
+		icmd->ulpContext = ox_id;
+		icmd->ulpCommand = CMD_XMIT_SEQUENCE64_CX;
+		break;
+	default:
+		break;
+	}
+}
+
+static void
+__lpfc_sli_prep_xmit_seq64_s4(struct lpfc_iocbq *cmdiocbq,
+			      struct lpfc_dmabuf *bmp, u16 rpi, u16 ox_id,
+			      u32 full_size, u8 rctl, u8 last_seq, u8 cr_cx_cmd)
+{
+	union lpfc_wqe128 *wqe;
+	struct ulp_bde64 *bpl;
+
+	wqe = &cmdiocbq->wqe;
+	memset(wqe, 0, sizeof(*wqe));
+
+	/* Words 0 - 2 */
+	bpl = (struct ulp_bde64 *)bmp->virt;
+	wqe->xmit_sequence.bde.addrHigh = bpl->addrHigh;
+	wqe->xmit_sequence.bde.addrLow = bpl->addrLow;
+	wqe->xmit_sequence.bde.tus.w = bpl->tus.w;
+
+	/* Word 5 */
+	bf_set(wqe_ls, &wqe->xmit_sequence.wge_ctl, last_seq);
+	bf_set(wqe_la, &wqe->xmit_sequence.wge_ctl, 1);
+	bf_set(wqe_dfctl, &wqe->xmit_sequence.wge_ctl, 0);
+	bf_set(wqe_rctl, &wqe->xmit_sequence.wge_ctl, rctl);
+	bf_set(wqe_type, &wqe->xmit_sequence.wge_ctl, FC_TYPE_CT);
+
+	/* Word 6 */
+	bf_set(wqe_ctxt_tag, &wqe->xmit_sequence.wqe_com, rpi);
+
+	bf_set(wqe_cmnd, &wqe->xmit_sequence.wqe_com,
+	       CMD_XMIT_SEQUENCE64_WQE);
+
+	/* Word 7 */
+	bf_set(wqe_class, &wqe->xmit_sequence.wqe_com, CLASS3);
+
+	/* Word 9 */
+	bf_set(wqe_rcvoxid, &wqe->xmit_sequence.wqe_com, ox_id);
+
+	/* Word 12 */
+	if (cmdiocbq->cmd_flag & (LPFC_IO_LIBDFC | LPFC_IO_LOOPBACK))
+		wqe->xmit_sequence.xmit_len = full_size;
+	else
+		wqe->xmit_sequence.xmit_len =
+			wqe->xmit_sequence.bde.tus.f.bdeSize;
+}
+
+void
+lpfc_sli_prep_xmit_seq64(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocbq,
+			 struct lpfc_dmabuf *bmp, u16 rpi, u16 ox_id,
+			 u32 num_entry, u8 rctl, u8 last_seq, u8 cr_cx_cmd)
+{
+	phba->__lpfc_sli_prep_xmit_seq64(cmdiocbq, bmp, rpi, ox_id, num_entry,
+					 rctl, last_seq, cr_cx_cmd);
+}
+
+static void
+__lpfc_sli_prep_abort_xri_s3(struct lpfc_iocbq *cmdiocbq, u16 ulp_context,
+			     u16 iotag, u8 ulp_class, u16 cqid, bool ia,
+			     bool wqec)
+{
+	IOCB_t *icmd = NULL;
+
+	icmd = &cmdiocbq->iocb;
+	memset(icmd, 0, sizeof(*icmd));
+
+	/* Word 5 */
+	icmd->un.acxri.abortContextTag = ulp_context;
+	icmd->un.acxri.abortIoTag = iotag;
+
+	if (ia) {
+		/* Word 7 */
+		icmd->ulpCommand = CMD_CLOSE_XRI_CN;
+	} else {
+		/* Word 3 */
+		icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
+
+		/* Word 7 */
+		icmd->ulpClass = ulp_class;
+		icmd->ulpCommand = CMD_ABORT_XRI_CN;
+	}
+
+	/* Word 7 */
+	icmd->ulpLe = 1;
+}
+
+static void
+__lpfc_sli_prep_abort_xri_s4(struct lpfc_iocbq *cmdiocbq, u16 ulp_context,
+			     u16 iotag, u8 ulp_class, u16 cqid, bool ia,
+			     bool wqec)
+{
+	union lpfc_wqe128 *wqe;
+
+	wqe = &cmdiocbq->wqe;
+	memset(wqe, 0, sizeof(*wqe));
+
+	/* Word 3 */
+	bf_set(abort_cmd_criteria, &wqe->abort_cmd, T_XRI_TAG);
+	if (ia)
+		bf_set(abort_cmd_ia, &wqe->abort_cmd, 1);
+	else
+		bf_set(abort_cmd_ia, &wqe->abort_cmd, 0);
+
+	/* Word 7 */
+	bf_set(wqe_cmnd, &wqe->abort_cmd.wqe_com, CMD_ABORT_XRI_WQE);
+
+	/* Word 8 */
+	wqe->abort_cmd.wqe_com.abort_tag = ulp_context;
+
+	/* Word 9 */
+	bf_set(wqe_reqtag, &wqe->abort_cmd.wqe_com, iotag);
+
+	/* Word 10 */
+	bf_set(wqe_qosd, &wqe->abort_cmd.wqe_com, 1);
+
+	/* Word 11 */
+	if (wqec)
+		bf_set(wqe_wqec, &wqe->abort_cmd.wqe_com, 1);
+	bf_set(wqe_cqid, &wqe->abort_cmd.wqe_com, cqid);
+	bf_set(wqe_cmd_type, &wqe->abort_cmd.wqe_com, OTHER_COMMAND);
+}
+
+void
+lpfc_sli_prep_abort_xri(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocbq,
+			u16 ulp_context, u16 iotag, u8 ulp_class, u16 cqid,
+			bool ia, bool wqec)
+{
+	phba->__lpfc_sli_prep_abort_xri(cmdiocbq, ulp_context, iotag, ulp_class,
+					cqid, ia, wqec);
+}
+
+/**
+ * lpfc_sli_api_table_setup - Set up sli api function jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SLI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_sli_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+	switch (dev_grp) {
+	case LPFC_PCI_DEV_LP:
+		phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s3;
+		phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s3;
+		phba->__lpfc_sli_issue_fcp_io = __lpfc_sli_issue_fcp_io_s3;
+		phba->__lpfc_sli_prep_els_req_rsp = __lpfc_sli_prep_els_req_rsp_s3;
+		phba->__lpfc_sli_prep_gen_req = __lpfc_sli_prep_gen_req_s3;
+		phba->__lpfc_sli_prep_xmit_seq64 = __lpfc_sli_prep_xmit_seq64_s3;
+		phba->__lpfc_sli_prep_abort_xri = __lpfc_sli_prep_abort_xri_s3;
+		break;
+	case LPFC_PCI_DEV_OC:
+		phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s4;
+		phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s4;
+		phba->__lpfc_sli_issue_fcp_io = __lpfc_sli_issue_fcp_io_s4;
+		phba->__lpfc_sli_prep_els_req_rsp = __lpfc_sli_prep_els_req_rsp_s4;
+		phba->__lpfc_sli_prep_gen_req = __lpfc_sli_prep_gen_req_s4;
+		phba->__lpfc_sli_prep_xmit_seq64 = __lpfc_sli_prep_xmit_seq64_s4;
+		phba->__lpfc_sli_prep_abort_xri = __lpfc_sli_prep_abort_xri_s4;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"1419 Invalid HBA PCI-device group: 0x%x\n",
+				dev_grp);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+/**
+ * lpfc_sli4_calc_ring - Calculates which ring to use
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ *
+ * For SLI4 only, FCP IO can deferred to one fo many WQs, based on
+ * hba_wqidx, thus we need to calculate the corresponding ring.
+ * Since ABORTS must go on the same WQ of the command they are
+ * aborting, we use command's hba_wqidx.
+ */
+struct lpfc_sli_ring *
+lpfc_sli4_calc_ring(struct lpfc_hba *phba, struct lpfc_iocbq *piocb)
+{
+	struct lpfc_io_buf *lpfc_cmd;
+
+	if (piocb->cmd_flag & (LPFC_IO_FCP | LPFC_USE_FCPWQIDX)) {
+		if (unlikely(!phba->sli4_hba.hdwq))
+			return NULL;
+		/*
+		 * for abort iocb hba_wqidx should already
+		 * be setup based on what work queue we used.
+		 */
+		if (!(piocb->cmd_flag & LPFC_USE_FCPWQIDX)) {
+			lpfc_cmd = piocb->io_buf;
+			piocb->hba_wqidx = lpfc_cmd->hdwq_no;
+		}
+		return phba->sli4_hba.hdwq[piocb->hba_wqidx].io_wq->pring;
+	} else {
+		if (unlikely(!phba->sli4_hba.els_wq))
+			return NULL;
+		piocb->hba_wqidx = 0;
+		return phba->sli4_hba.els_wq->pring;
+	}
+}
+
+/**
+ * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
+ * @phba: Pointer to HBA context object.
+ * @ring_number: Ring number
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * lpfc_sli_issue_iocb is a wrapper around __lpfc_sli_issue_iocb
+ * function. This function gets the hbalock and calls
+ * __lpfc_sli_issue_iocb function and will return the error returned
+ * by __lpfc_sli_issue_iocb function. This wrapper is used by
+ * functions which do not hold hbalock.
+ **/
+int
+lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
+		    struct lpfc_iocbq *piocb, uint32_t flag)
+{
+	struct lpfc_sli_ring *pring;
+	struct lpfc_queue *eq;
+	unsigned long iflags;
+	int rc;
+
+	/* If the PCI channel is in offline state, do not post iocbs. */
+	if (unlikely(pci_channel_offline(phba->pcidev)))
+		return IOCB_ERROR;
+
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		lpfc_sli_prep_wqe(phba, piocb);
+
+		eq = phba->sli4_hba.hdwq[piocb->hba_wqidx].hba_eq;
+
+		pring = lpfc_sli4_calc_ring(phba, piocb);
+		if (unlikely(pring == NULL))
+			return IOCB_ERROR;
+
+		spin_lock_irqsave(&pring->ring_lock, iflags);
+		rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+		spin_unlock_irqrestore(&pring->ring_lock, iflags);
+
+		lpfc_sli4_poll_eq(eq, LPFC_POLL_FASTPATH);
+	} else {
+		/* For now, SLI2/3 will still use hbalock */
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+	}
+	return rc;
+}
+
+/**
+ * lpfc_extra_ring_setup - Extra ring setup function
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called while driver attaches with the
+ * HBA to setup the extra ring. The extra ring is used
+ * only when driver needs to support target mode functionality
+ * or IP over FC functionalities.
+ *
+ * This function is called with no lock held. SLI3 only.
+ **/
+static int
+lpfc_extra_ring_setup( struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli;
+	struct lpfc_sli_ring *pring;
+
+	psli = &phba->sli;
+
+	/* Adjust cmd/rsp ring iocb entries more evenly */
+
+	/* Take some away from the FCP ring */
+	pring = &psli->sli3_ring[LPFC_FCP_RING];
+	pring->sli.sli3.numCiocb -= SLI2_IOCB_CMD_R1XTRA_ENTRIES;
+	pring->sli.sli3.numRiocb -= SLI2_IOCB_RSP_R1XTRA_ENTRIES;
+	pring->sli.sli3.numCiocb -= SLI2_IOCB_CMD_R3XTRA_ENTRIES;
+	pring->sli.sli3.numRiocb -= SLI2_IOCB_RSP_R3XTRA_ENTRIES;
+
+	/* and give them to the extra ring */
+	pring = &psli->sli3_ring[LPFC_EXTRA_RING];
+
+	pring->sli.sli3.numCiocb += SLI2_IOCB_CMD_R1XTRA_ENTRIES;
+	pring->sli.sli3.numRiocb += SLI2_IOCB_RSP_R1XTRA_ENTRIES;
+	pring->sli.sli3.numCiocb += SLI2_IOCB_CMD_R3XTRA_ENTRIES;
+	pring->sli.sli3.numRiocb += SLI2_IOCB_RSP_R3XTRA_ENTRIES;
+
+	/* Setup default profile for this ring */
+	pring->iotag_max = 4096;
+	pring->num_mask = 1;
+	pring->prt[0].profile = 0;      /* Mask 0 */
+	pring->prt[0].rctl = phba->cfg_multi_ring_rctl;
+	pring->prt[0].type = phba->cfg_multi_ring_type;
+	pring->prt[0].lpfc_sli_rcv_unsol_event = NULL;
+	return 0;
+}
+
+static void
+lpfc_sli_post_recovery_event(struct lpfc_hba *phba,
+			     struct lpfc_nodelist *ndlp)
+{
+	unsigned long iflags;
+	struct lpfc_work_evt  *evtp = &ndlp->recovery_evt;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	if (!list_empty(&evtp->evt_listp)) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return;
+	}
+
+	/* Incrementing the reference count until the queued work is done. */
+	evtp->evt_arg1  = lpfc_nlp_get(ndlp);
+	if (!evtp->evt_arg1) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return;
+	}
+	evtp->evt = LPFC_EVT_RECOVER_PORT;
+	list_add_tail(&evtp->evt_listp, &phba->work_list);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	lpfc_worker_wake_up(phba);
+}
+
+/* lpfc_sli_abts_err_handler - handle a failed ABTS request from an SLI3 port.
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to iocb object.
+ *
+ * The async_event handler calls this routine when it receives
+ * an ASYNC_STATUS_CN event from the port.  The port generates
+ * this event when an Abort Sequence request to an rport fails
+ * twice in succession.  The abort could be originated by the
+ * driver or by the port.  The ABTS could have been for an ELS
+ * or FCP IO.  The port only generates this event when an ABTS
+ * fails to complete after one retry.
+ */
+static void
+lpfc_sli_abts_err_handler(struct lpfc_hba *phba,
+			  struct lpfc_iocbq *iocbq)
+{
+	struct lpfc_nodelist *ndlp = NULL;
+	uint16_t rpi = 0, vpi = 0;
+	struct lpfc_vport *vport = NULL;
+
+	/* The rpi in the ulpContext is vport-sensitive. */
+	vpi = iocbq->iocb.un.asyncstat.sub_ctxt_tag;
+	rpi = iocbq->iocb.ulpContext;
+
+	lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+			"3092 Port generated ABTS async event "
+			"on vpi %d rpi %d status 0x%x\n",
+			vpi, rpi, iocbq->iocb.ulpStatus);
+
+	vport = lpfc_find_vport_by_vpid(phba, vpi);
+	if (!vport)
+		goto err_exit;
+	ndlp = lpfc_findnode_rpi(vport, rpi);
+	if (!ndlp)
+		goto err_exit;
+
+	if (iocbq->iocb.ulpStatus == IOSTAT_LOCAL_REJECT)
+		lpfc_sli_abts_recover_port(vport, ndlp);
+	return;
+
+ err_exit:
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"3095 Event Context not found, no "
+			"action on vpi %d rpi %d status 0x%x, reason 0x%x\n",
+			vpi, rpi, iocbq->iocb.ulpStatus,
+			iocbq->iocb.ulpContext);
+}
+
+/* lpfc_sli4_abts_err_handler - handle a failed ABTS request from an SLI4 port.
+ * @phba: pointer to HBA context object.
+ * @ndlp: nodelist pointer for the impacted rport.
+ * @axri: pointer to the wcqe containing the failed exchange.
+ *
+ * The driver calls this routine when it receives an ABORT_XRI_FCP CQE from the
+ * port.  The port generates this event when an abort exchange request to an
+ * rport fails twice in succession with no reply.  The abort could be originated
+ * by the driver or by the port.  The ABTS could have been for an ELS or FCP IO.
+ */
+void
+lpfc_sli4_abts_err_handler(struct lpfc_hba *phba,
+			   struct lpfc_nodelist *ndlp,
+			   struct sli4_wcqe_xri_aborted *axri)
+{
+	uint32_t ext_status = 0;
+
+	if (!ndlp) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"3115 Node Context not found, driver "
+				"ignoring abts err event\n");
+		return;
+	}
+
+	lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+			"3116 Port generated FCP XRI ABORT event on "
+			"vpi %d rpi %d xri x%x status 0x%x parameter x%x\n",
+			ndlp->vport->vpi, phba->sli4_hba.rpi_ids[ndlp->nlp_rpi],
+			bf_get(lpfc_wcqe_xa_xri, axri),
+			bf_get(lpfc_wcqe_xa_status, axri),
+			axri->parameter);
+
+	/*
+	 * Catch the ABTS protocol failure case.  Older OCe FW releases returned
+	 * LOCAL_REJECT and 0 for a failed ABTS exchange and later OCe and
+	 * LPe FW releases returned LOCAL_REJECT and SEQUENCE_TIMEOUT.
+	 */
+	ext_status = axri->parameter & IOERR_PARAM_MASK;
+	if ((bf_get(lpfc_wcqe_xa_status, axri) == IOSTAT_LOCAL_REJECT) &&
+	    ((ext_status == IOERR_SEQUENCE_TIMEOUT) || (ext_status == 0)))
+		lpfc_sli_post_recovery_event(phba, ndlp);
+}
+
+/**
+ * lpfc_sli_async_event_handler - ASYNC iocb handler function
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @iocbq: Pointer to iocb object.
+ *
+ * This function is called by the slow ring event handler
+ * function when there is an ASYNC event iocb in the ring.
+ * This function is called with no lock held.
+ * Currently this function handles only temperature related
+ * ASYNC events. The function decodes the temperature sensor
+ * event message and posts events for the management applications.
+ **/
+static void
+lpfc_sli_async_event_handler(struct lpfc_hba * phba,
+	struct lpfc_sli_ring * pring, struct lpfc_iocbq * iocbq)
+{
+	IOCB_t *icmd;
+	uint16_t evt_code;
+	struct temp_event temp_event_data;
+	struct Scsi_Host *shost;
+	uint32_t *iocb_w;
+
+	icmd = &iocbq->iocb;
+	evt_code = icmd->un.asyncstat.evt_code;
+
+	switch (evt_code) {
+	case ASYNC_TEMP_WARN:
+	case ASYNC_TEMP_SAFE:
+		temp_event_data.data = (uint32_t) icmd->ulpContext;
+		temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT;
+		if (evt_code == ASYNC_TEMP_WARN) {
+			temp_event_data.event_code = LPFC_THRESHOLD_TEMP;
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0347 Adapter is very hot, please take "
+				"corrective action. temperature : %d Celsius\n",
+				(uint32_t) icmd->ulpContext);
+		} else {
+			temp_event_data.event_code = LPFC_NORMAL_TEMP;
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0340 Adapter temperature is OK now. "
+				"temperature : %d Celsius\n",
+				(uint32_t) icmd->ulpContext);
+		}
+
+		/* Send temperature change event to applications */
+		shost = lpfc_shost_from_vport(phba->pport);
+		fc_host_post_vendor_event(shost, fc_get_event_number(),
+			sizeof(temp_event_data), (char *) &temp_event_data,
+			LPFC_NL_VENDOR_ID);
+		break;
+	case ASYNC_STATUS_CN:
+		lpfc_sli_abts_err_handler(phba, iocbq);
+		break;
+	default:
+		iocb_w = (uint32_t *) icmd;
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"0346 Ring %d handler: unexpected ASYNC_STATUS"
+			" evt_code 0x%x\n"
+			"W0  0x%08x W1  0x%08x W2  0x%08x W3  0x%08x\n"
+			"W4  0x%08x W5  0x%08x W6  0x%08x W7  0x%08x\n"
+			"W8  0x%08x W9  0x%08x W10 0x%08x W11 0x%08x\n"
+			"W12 0x%08x W13 0x%08x W14 0x%08x W15 0x%08x\n",
+			pring->ringno, icmd->un.asyncstat.evt_code,
+			iocb_w[0], iocb_w[1], iocb_w[2], iocb_w[3],
+			iocb_w[4], iocb_w[5], iocb_w[6], iocb_w[7],
+			iocb_w[8], iocb_w[9], iocb_w[10], iocb_w[11],
+			iocb_w[12], iocb_w[13], iocb_w[14], iocb_w[15]);
+
+		break;
+	}
+}
+
+
+/**
+ * lpfc_sli4_setup - SLI ring setup function
+ * @phba: Pointer to HBA context object.
+ *
+ * lpfc_sli_setup sets up rings of the SLI interface with
+ * number of iocbs per ring and iotags. This function is
+ * called while driver attach to the HBA and before the
+ * interrupts are enabled. So there is no need for locking.
+ *
+ * This function always returns 0.
+ **/
+int
+lpfc_sli4_setup(struct lpfc_hba *phba)
+{
+	struct lpfc_sli_ring *pring;
+
+	pring = phba->sli4_hba.els_wq->pring;
+	pring->num_mask = LPFC_MAX_RING_MASK;
+	pring->prt[0].profile = 0;	/* Mask 0 */
+	pring->prt[0].rctl = FC_RCTL_ELS_REQ;
+	pring->prt[0].type = FC_TYPE_ELS;
+	pring->prt[0].lpfc_sli_rcv_unsol_event =
+	    lpfc_els_unsol_event;
+	pring->prt[1].profile = 0;	/* Mask 1 */
+	pring->prt[1].rctl = FC_RCTL_ELS_REP;
+	pring->prt[1].type = FC_TYPE_ELS;
+	pring->prt[1].lpfc_sli_rcv_unsol_event =
+	    lpfc_els_unsol_event;
+	pring->prt[2].profile = 0;	/* Mask 2 */
+	/* NameServer Inquiry */
+	pring->prt[2].rctl = FC_RCTL_DD_UNSOL_CTL;
+	/* NameServer */
+	pring->prt[2].type = FC_TYPE_CT;
+	pring->prt[2].lpfc_sli_rcv_unsol_event =
+	    lpfc_ct_unsol_event;
+	pring->prt[3].profile = 0;	/* Mask 3 */
+	/* NameServer response */
+	pring->prt[3].rctl = FC_RCTL_DD_SOL_CTL;
+	/* NameServer */
+	pring->prt[3].type = FC_TYPE_CT;
+	pring->prt[3].lpfc_sli_rcv_unsol_event =
+	    lpfc_ct_unsol_event;
+	return 0;
+}
+
+/**
+ * lpfc_sli_setup - SLI ring setup function
+ * @phba: Pointer to HBA context object.
+ *
+ * lpfc_sli_setup sets up rings of the SLI interface with
+ * number of iocbs per ring and iotags. This function is
+ * called while driver attach to the HBA and before the
+ * interrupts are enabled. So there is no need for locking.
+ *
+ * This function always returns 0. SLI3 only.
+ **/
+int
+lpfc_sli_setup(struct lpfc_hba *phba)
+{
+	int i, totiocbsize = 0;
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_sli_ring *pring;
+
+	psli->num_rings = MAX_SLI3_CONFIGURED_RINGS;
+	psli->sli_flag = 0;
+
+	psli->iocbq_lookup = NULL;
+	psli->iocbq_lookup_len = 0;
+	psli->last_iotag = 0;
+
+	for (i = 0; i < psli->num_rings; i++) {
+		pring = &psli->sli3_ring[i];
+		switch (i) {
+		case LPFC_FCP_RING:	/* ring 0 - FCP */
+			/* numCiocb and numRiocb are used in config_port */
+			pring->sli.sli3.numCiocb = SLI2_IOCB_CMD_R0_ENTRIES;
+			pring->sli.sli3.numRiocb = SLI2_IOCB_RSP_R0_ENTRIES;
+			pring->sli.sli3.numCiocb +=
+				SLI2_IOCB_CMD_R1XTRA_ENTRIES;
+			pring->sli.sli3.numRiocb +=
+				SLI2_IOCB_RSP_R1XTRA_ENTRIES;
+			pring->sli.sli3.numCiocb +=
+				SLI2_IOCB_CMD_R3XTRA_ENTRIES;
+			pring->sli.sli3.numRiocb +=
+				SLI2_IOCB_RSP_R3XTRA_ENTRIES;
+			pring->sli.sli3.sizeCiocb = (phba->sli_rev == 3) ?
+							SLI3_IOCB_CMD_SIZE :
+							SLI2_IOCB_CMD_SIZE;
+			pring->sli.sli3.sizeRiocb = (phba->sli_rev == 3) ?
+							SLI3_IOCB_RSP_SIZE :
+							SLI2_IOCB_RSP_SIZE;
+			pring->iotag_ctr = 0;
+			pring->iotag_max =
+			    (phba->cfg_hba_queue_depth * 2);
+			pring->fast_iotag = pring->iotag_max;
+			pring->num_mask = 0;
+			break;
+		case LPFC_EXTRA_RING:	/* ring 1 - EXTRA */
+			/* numCiocb and numRiocb are used in config_port */
+			pring->sli.sli3.numCiocb = SLI2_IOCB_CMD_R1_ENTRIES;
+			pring->sli.sli3.numRiocb = SLI2_IOCB_RSP_R1_ENTRIES;
+			pring->sli.sli3.sizeCiocb = (phba->sli_rev == 3) ?
+							SLI3_IOCB_CMD_SIZE :
+							SLI2_IOCB_CMD_SIZE;
+			pring->sli.sli3.sizeRiocb = (phba->sli_rev == 3) ?
+							SLI3_IOCB_RSP_SIZE :
+							SLI2_IOCB_RSP_SIZE;
+			pring->iotag_max = phba->cfg_hba_queue_depth;
+			pring->num_mask = 0;
+			break;
+		case LPFC_ELS_RING:	/* ring 2 - ELS / CT */
+			/* numCiocb and numRiocb are used in config_port */
+			pring->sli.sli3.numCiocb = SLI2_IOCB_CMD_R2_ENTRIES;
+			pring->sli.sli3.numRiocb = SLI2_IOCB_RSP_R2_ENTRIES;
+			pring->sli.sli3.sizeCiocb = (phba->sli_rev == 3) ?
+							SLI3_IOCB_CMD_SIZE :
+							SLI2_IOCB_CMD_SIZE;
+			pring->sli.sli3.sizeRiocb = (phba->sli_rev == 3) ?
+							SLI3_IOCB_RSP_SIZE :
+							SLI2_IOCB_RSP_SIZE;
+			pring->fast_iotag = 0;
+			pring->iotag_ctr = 0;
+			pring->iotag_max = 4096;
+			pring->lpfc_sli_rcv_async_status =
+				lpfc_sli_async_event_handler;
+			pring->num_mask = LPFC_MAX_RING_MASK;
+			pring->prt[0].profile = 0;	/* Mask 0 */
+			pring->prt[0].rctl = FC_RCTL_ELS_REQ;
+			pring->prt[0].type = FC_TYPE_ELS;
+			pring->prt[0].lpfc_sli_rcv_unsol_event =
+			    lpfc_els_unsol_event;
+			pring->prt[1].profile = 0;	/* Mask 1 */
+			pring->prt[1].rctl = FC_RCTL_ELS_REP;
+			pring->prt[1].type = FC_TYPE_ELS;
+			pring->prt[1].lpfc_sli_rcv_unsol_event =
+			    lpfc_els_unsol_event;
+			pring->prt[2].profile = 0;	/* Mask 2 */
+			/* NameServer Inquiry */
+			pring->prt[2].rctl = FC_RCTL_DD_UNSOL_CTL;
+			/* NameServer */
+			pring->prt[2].type = FC_TYPE_CT;
+			pring->prt[2].lpfc_sli_rcv_unsol_event =
+			    lpfc_ct_unsol_event;
+			pring->prt[3].profile = 0;	/* Mask 3 */
+			/* NameServer response */
+			pring->prt[3].rctl = FC_RCTL_DD_SOL_CTL;
+			/* NameServer */
+			pring->prt[3].type = FC_TYPE_CT;
+			pring->prt[3].lpfc_sli_rcv_unsol_event =
+			    lpfc_ct_unsol_event;
+			break;
+		}
+		totiocbsize += (pring->sli.sli3.numCiocb *
+			pring->sli.sli3.sizeCiocb) +
+			(pring->sli.sli3.numRiocb * pring->sli.sli3.sizeRiocb);
+	}
+	if (totiocbsize > MAX_SLIM_IOCB_SIZE) {
+		/* Too many cmd / rsp ring entries in SLI2 SLIM */
+		printk(KERN_ERR "%d:0462 Too many cmd / rsp ring entries in "
+		       "SLI2 SLIM Data: x%x x%lx\n",
+		       phba->brd_no, totiocbsize,
+		       (unsigned long) MAX_SLIM_IOCB_SIZE);
+	}
+	if (phba->cfg_multi_ring_support == 2)
+		lpfc_extra_ring_setup(phba);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli4_queue_init - Queue initialization function
+ * @phba: Pointer to HBA context object.
+ *
+ * lpfc_sli4_queue_init sets up mailbox queues and iocb queues for each
+ * ring. This function also initializes ring indices of each ring.
+ * This function is called during the initialization of the SLI
+ * interface of an HBA.
+ * This function is called with no lock held and always returns
+ * 1.
+ **/
+void
+lpfc_sli4_queue_init(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli;
+	struct lpfc_sli_ring *pring;
+	int i;
+
+	psli = &phba->sli;
+	spin_lock_irq(&phba->hbalock);
+	INIT_LIST_HEAD(&psli->mboxq);
+	INIT_LIST_HEAD(&psli->mboxq_cmpl);
+	/* Initialize list headers for txq and txcmplq as double linked lists */
+	for (i = 0; i < phba->cfg_hdw_queue; i++) {
+		pring = phba->sli4_hba.hdwq[i].io_wq->pring;
+		pring->flag = 0;
+		pring->ringno = LPFC_FCP_RING;
+		pring->txcmplq_cnt = 0;
+		INIT_LIST_HEAD(&pring->txq);
+		INIT_LIST_HEAD(&pring->txcmplq);
+		INIT_LIST_HEAD(&pring->iocb_continueq);
+		spin_lock_init(&pring->ring_lock);
+	}
+	pring = phba->sli4_hba.els_wq->pring;
+	pring->flag = 0;
+	pring->ringno = LPFC_ELS_RING;
+	pring->txcmplq_cnt = 0;
+	INIT_LIST_HEAD(&pring->txq);
+	INIT_LIST_HEAD(&pring->txcmplq);
+	INIT_LIST_HEAD(&pring->iocb_continueq);
+	spin_lock_init(&pring->ring_lock);
+
+	if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
+		pring = phba->sli4_hba.nvmels_wq->pring;
+		pring->flag = 0;
+		pring->ringno = LPFC_ELS_RING;
+		pring->txcmplq_cnt = 0;
+		INIT_LIST_HEAD(&pring->txq);
+		INIT_LIST_HEAD(&pring->txcmplq);
+		INIT_LIST_HEAD(&pring->iocb_continueq);
+		spin_lock_init(&pring->ring_lock);
+	}
+
+	spin_unlock_irq(&phba->hbalock);
+}
+
+/**
+ * lpfc_sli_queue_init - Queue initialization function
+ * @phba: Pointer to HBA context object.
+ *
+ * lpfc_sli_queue_init sets up mailbox queues and iocb queues for each
+ * ring. This function also initializes ring indices of each ring.
+ * This function is called during the initialization of the SLI
+ * interface of an HBA.
+ * This function is called with no lock held and always returns
+ * 1.
+ **/
+void
+lpfc_sli_queue_init(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli;
+	struct lpfc_sli_ring *pring;
+	int i;
+
+	psli = &phba->sli;
+	spin_lock_irq(&phba->hbalock);
+	INIT_LIST_HEAD(&psli->mboxq);
+	INIT_LIST_HEAD(&psli->mboxq_cmpl);
+	/* Initialize list headers for txq and txcmplq as double linked lists */
+	for (i = 0; i < psli->num_rings; i++) {
+		pring = &psli->sli3_ring[i];
+		pring->ringno = i;
+		pring->sli.sli3.next_cmdidx  = 0;
+		pring->sli.sli3.local_getidx = 0;
+		pring->sli.sli3.cmdidx = 0;
+		INIT_LIST_HEAD(&pring->iocb_continueq);
+		INIT_LIST_HEAD(&pring->iocb_continue_saveq);
+		INIT_LIST_HEAD(&pring->postbufq);
+		pring->flag = 0;
+		INIT_LIST_HEAD(&pring->txq);
+		INIT_LIST_HEAD(&pring->txcmplq);
+		spin_lock_init(&pring->ring_lock);
+	}
+	spin_unlock_irq(&phba->hbalock);
+}
+
+/**
+ * lpfc_sli_mbox_sys_flush - Flush mailbox command sub-system
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine flushes the mailbox command subsystem. It will unconditionally
+ * flush all the mailbox commands in the three possible stages in the mailbox
+ * command sub-system: pending mailbox command queue; the outstanding mailbox
+ * command; and completed mailbox command queue. It is caller's responsibility
+ * to make sure that the driver is in the proper state to flush the mailbox
+ * command sub-system. Namely, the posting of mailbox commands into the
+ * pending mailbox command queue from the various clients must be stopped;
+ * either the HBA is in a state that it will never works on the outstanding
+ * mailbox command (such as in EEH or ERATT conditions) or the outstanding
+ * mailbox command has been completed.
+ **/
+static void
+lpfc_sli_mbox_sys_flush(struct lpfc_hba *phba)
+{
+	LIST_HEAD(completions);
+	struct lpfc_sli *psli = &phba->sli;
+	LPFC_MBOXQ_t *pmb;
+	unsigned long iflag;
+
+	/* Disable softirqs, including timers from obtaining phba->hbalock */
+	local_bh_disable();
+
+	/* Flush all the mailbox commands in the mbox system */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+
+	/* The pending mailbox command queue */
+	list_splice_init(&phba->sli.mboxq, &completions);
+	/* The outstanding active mailbox command */
+	if (psli->mbox_active) {
+		list_add_tail(&psli->mbox_active->list, &completions);
+		psli->mbox_active = NULL;
+		psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	}
+	/* The completed mailbox command queue */
+	list_splice_init(&phba->sli.mboxq_cmpl, &completions);
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+	/* Enable softirqs again, done with phba->hbalock */
+	local_bh_enable();
+
+	/* Return all flushed mailbox commands with MBX_NOT_FINISHED status */
+	while (!list_empty(&completions)) {
+		list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
+		pmb->u.mb.mbxStatus = MBX_NOT_FINISHED;
+		if (pmb->mbox_cmpl)
+			pmb->mbox_cmpl(phba, pmb);
+	}
+}
+
+/**
+ * lpfc_sli_host_down - Vport cleanup function
+ * @vport: Pointer to virtual port object.
+ *
+ * lpfc_sli_host_down is called to clean up the resources
+ * associated with a vport before destroying virtual
+ * port data structures.
+ * This function does following operations:
+ * - Free discovery resources associated with this virtual
+ *   port.
+ * - Free iocbs associated with this virtual port in
+ *   the txq.
+ * - Send abort for all iocb commands associated with this
+ *   vport in txcmplq.
+ *
+ * This function is called with no lock held and always returns 1.
+ **/
+int
+lpfc_sli_host_down(struct lpfc_vport *vport)
+{
+	LIST_HEAD(completions);
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_queue *qp = NULL;
+	struct lpfc_sli_ring *pring;
+	struct lpfc_iocbq *iocb, *next_iocb;
+	int i;
+	unsigned long flags = 0;
+	uint16_t prev_pring_flag;
+
+	lpfc_cleanup_discovery_resources(vport);
+
+	spin_lock_irqsave(&phba->hbalock, flags);
+
+	/*
+	 * Error everything on the txq since these iocbs
+	 * have not been given to the FW yet.
+	 * Also issue ABTS for everything on the txcmplq
+	 */
+	if (phba->sli_rev != LPFC_SLI_REV4) {
+		for (i = 0; i < psli->num_rings; i++) {
+			pring = &psli->sli3_ring[i];
+			prev_pring_flag = pring->flag;
+			/* Only slow rings */
+			if (pring->ringno == LPFC_ELS_RING) {
+				pring->flag |= LPFC_DEFERRED_RING_EVENT;
+				/* Set the lpfc data pending flag */
+				set_bit(LPFC_DATA_READY, &phba->data_flags);
+			}
+			list_for_each_entry_safe(iocb, next_iocb,
+						 &pring->txq, list) {
+				if (iocb->vport != vport)
+					continue;
+				list_move_tail(&iocb->list, &completions);
+			}
+			list_for_each_entry_safe(iocb, next_iocb,
+						 &pring->txcmplq, list) {
+				if (iocb->vport != vport)
+					continue;
+				lpfc_sli_issue_abort_iotag(phba, pring, iocb,
+							   NULL);
+			}
+			pring->flag = prev_pring_flag;
+		}
+	} else {
+		list_for_each_entry(qp, &phba->sli4_hba.lpfc_wq_list, wq_list) {
+			pring = qp->pring;
+			if (!pring)
+				continue;
+			if (pring == phba->sli4_hba.els_wq->pring) {
+				pring->flag |= LPFC_DEFERRED_RING_EVENT;
+				/* Set the lpfc data pending flag */
+				set_bit(LPFC_DATA_READY, &phba->data_flags);
+			}
+			prev_pring_flag = pring->flag;
+			spin_lock(&pring->ring_lock);
+			list_for_each_entry_safe(iocb, next_iocb,
+						 &pring->txq, list) {
+				if (iocb->vport != vport)
+					continue;
+				list_move_tail(&iocb->list, &completions);
+			}
+			spin_unlock(&pring->ring_lock);
+			list_for_each_entry_safe(iocb, next_iocb,
+						 &pring->txcmplq, list) {
+				if (iocb->vport != vport)
+					continue;
+				lpfc_sli_issue_abort_iotag(phba, pring, iocb,
+							   NULL);
+			}
+			pring->flag = prev_pring_flag;
+		}
+	}
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+
+	/* Make sure HBA is alive */
+	lpfc_issue_hb_tmo(phba);
+
+	/* Cancel all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_DOWN);
+	return 1;
+}
+
+/**
+ * lpfc_sli_hba_down - Resource cleanup function for the HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function cleans up all iocb, buffers, mailbox commands
+ * while shutting down the HBA. This function is called with no
+ * lock held and always returns 1.
+ * This function does the following to cleanup driver resources:
+ * - Free discovery resources for each virtual port
+ * - Cleanup any pending fabric iocbs
+ * - Iterate through the iocb txq and free each entry
+ *   in the list.
+ * - Free up any buffer posted to the HBA
+ * - Free mailbox commands in the mailbox queue.
+ **/
+int
+lpfc_sli_hba_down(struct lpfc_hba *phba)
+{
+	LIST_HEAD(completions);
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_queue *qp = NULL;
+	struct lpfc_sli_ring *pring;
+	struct lpfc_dmabuf *buf_ptr;
+	unsigned long flags = 0;
+	int i;
+
+	/* Shutdown the mailbox command sub-system */
+	lpfc_sli_mbox_sys_shutdown(phba, LPFC_MBX_WAIT);
+
+	lpfc_hba_down_prep(phba);
+
+	/* Disable softirqs, including timers from obtaining phba->hbalock */
+	local_bh_disable();
+
+	lpfc_fabric_abort_hba(phba);
+
+	spin_lock_irqsave(&phba->hbalock, flags);
+
+	/*
+	 * Error everything on the txq since these iocbs
+	 * have not been given to the FW yet.
+	 */
+	if (phba->sli_rev != LPFC_SLI_REV4) {
+		for (i = 0; i < psli->num_rings; i++) {
+			pring = &psli->sli3_ring[i];
+			/* Only slow rings */
+			if (pring->ringno == LPFC_ELS_RING) {
+				pring->flag |= LPFC_DEFERRED_RING_EVENT;
+				/* Set the lpfc data pending flag */
+				set_bit(LPFC_DATA_READY, &phba->data_flags);
+			}
+			list_splice_init(&pring->txq, &completions);
+		}
+	} else {
+		list_for_each_entry(qp, &phba->sli4_hba.lpfc_wq_list, wq_list) {
+			pring = qp->pring;
+			if (!pring)
+				continue;
+			spin_lock(&pring->ring_lock);
+			list_splice_init(&pring->txq, &completions);
+			spin_unlock(&pring->ring_lock);
+			if (pring == phba->sli4_hba.els_wq->pring) {
+				pring->flag |= LPFC_DEFERRED_RING_EVENT;
+				/* Set the lpfc data pending flag */
+				set_bit(LPFC_DATA_READY, &phba->data_flags);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+
+	/* Cancel all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_DOWN);
+
+	spin_lock_irqsave(&phba->hbalock, flags);
+	list_splice_init(&phba->elsbuf, &completions);
+	phba->elsbuf_cnt = 0;
+	phba->elsbuf_prev_cnt = 0;
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+
+	while (!list_empty(&completions)) {
+		list_remove_head(&completions, buf_ptr,
+			struct lpfc_dmabuf, list);
+		lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
+		kfree(buf_ptr);
+	}
+
+	/* Enable softirqs again, done with phba->hbalock */
+	local_bh_enable();
+
+	/* Return any active mbox cmds */
+	del_timer_sync(&psli->mbox_tmo);
+
+	spin_lock_irqsave(&phba->pport->work_port_lock, flags);
+	phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
+	spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
+
+	return 1;
+}
+
+/**
+ * lpfc_sli_pcimem_bcopy - SLI memory copy function
+ * @srcp: Source memory pointer.
+ * @destp: Destination memory pointer.
+ * @cnt: Number of words required to be copied.
+ *
+ * This function is used for copying data between driver memory
+ * and the SLI memory. This function also changes the endianness
+ * of each word if native endianness is different from SLI
+ * endianness. This function can be called with or without
+ * lock.
+ **/
+void
+lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt)
+{
+	uint32_t *src = srcp;
+	uint32_t *dest = destp;
+	uint32_t ldata;
+	int i;
+
+	for (i = 0; i < (int)cnt; i += sizeof (uint32_t)) {
+		ldata = *src;
+		ldata = le32_to_cpu(ldata);
+		*dest = ldata;
+		src++;
+		dest++;
+	}
+}
+
+
+/**
+ * lpfc_sli_bemem_bcopy - SLI memory copy function
+ * @srcp: Source memory pointer.
+ * @destp: Destination memory pointer.
+ * @cnt: Number of words required to be copied.
+ *
+ * This function is used for copying data between a data structure
+ * with big endian representation to local endianness.
+ * This function can be called with or without lock.
+ **/
+void
+lpfc_sli_bemem_bcopy(void *srcp, void *destp, uint32_t cnt)
+{
+	uint32_t *src = srcp;
+	uint32_t *dest = destp;
+	uint32_t ldata;
+	int i;
+
+	for (i = 0; i < (int)cnt; i += sizeof(uint32_t)) {
+		ldata = *src;
+		ldata = be32_to_cpu(ldata);
+		*dest = ldata;
+		src++;
+		dest++;
+	}
+}
+
+/**
+ * lpfc_sli_ringpostbuf_put - Function to add a buffer to postbufq
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mp: Pointer to driver buffer object.
+ *
+ * This function is called with no lock held.
+ * It always return zero after adding the buffer to the postbufq
+ * buffer list.
+ **/
+int
+lpfc_sli_ringpostbuf_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			 struct lpfc_dmabuf *mp)
+{
+	/* Stick struct lpfc_dmabuf at end of postbufq so driver can look it up
+	   later */
+	spin_lock_irq(&phba->hbalock);
+	list_add_tail(&mp->list, &pring->postbufq);
+	pring->postbufq_cnt++;
+	spin_unlock_irq(&phba->hbalock);
+	return 0;
+}
+
+/**
+ * lpfc_sli_get_buffer_tag - allocates a tag for a CMD_QUE_XRI64_CX buffer
+ * @phba: Pointer to HBA context object.
+ *
+ * When HBQ is enabled, buffers are searched based on tags. This function
+ * allocates a tag for buffer posted using CMD_QUE_XRI64_CX iocb. The
+ * tag is bit wise or-ed with QUE_BUFTAG_BIT to make sure that the tag
+ * does not conflict with tags of buffer posted for unsolicited events.
+ * The function returns the allocated tag. The function is called with
+ * no locks held.
+ **/
+uint32_t
+lpfc_sli_get_buffer_tag(struct lpfc_hba *phba)
+{
+	spin_lock_irq(&phba->hbalock);
+	phba->buffer_tag_count++;
+	/*
+	 * Always set the QUE_BUFTAG_BIT to distiguish between
+	 * a tag assigned by HBQ.
+	 */
+	phba->buffer_tag_count |= QUE_BUFTAG_BIT;
+	spin_unlock_irq(&phba->hbalock);
+	return phba->buffer_tag_count;
+}
+
+/**
+ * lpfc_sli_ring_taggedbuf_get - find HBQ buffer associated with given tag
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @tag: Buffer tag.
+ *
+ * Buffers posted using CMD_QUE_XRI64_CX iocb are in pring->postbufq
+ * list. After HBA DMA data to these buffers, CMD_IOCB_RET_XRI64_CX
+ * iocb is posted to the response ring with the tag of the buffer.
+ * This function searches the pring->postbufq list using the tag
+ * to find buffer associated with CMD_IOCB_RET_XRI64_CX
+ * iocb. If the buffer is found then lpfc_dmabuf object of the
+ * buffer is returned to the caller else NULL is returned.
+ * This function is called with no lock held.
+ **/
+struct lpfc_dmabuf *
+lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			uint32_t tag)
+{
+	struct lpfc_dmabuf *mp, *next_mp;
+	struct list_head *slp = &pring->postbufq;
+
+	/* Search postbufq, from the beginning, looking for a match on tag */
+	spin_lock_irq(&phba->hbalock);
+	list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
+		if (mp->buffer_tag == tag) {
+			list_del_init(&mp->list);
+			pring->postbufq_cnt--;
+			spin_unlock_irq(&phba->hbalock);
+			return mp;
+		}
+	}
+
+	spin_unlock_irq(&phba->hbalock);
+	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"0402 Cannot find virtual addr for buffer tag on "
+			"ring %d Data x%lx x%px x%px x%x\n",
+			pring->ringno, (unsigned long) tag,
+			slp->next, slp->prev, pring->postbufq_cnt);
+
+	return NULL;
+}
+
+/**
+ * lpfc_sli_ringpostbuf_get - search buffers for unsolicited CT and ELS events
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @phys: DMA address of the buffer.
+ *
+ * This function searches the buffer list using the dma_address
+ * of unsolicited event to find the driver's lpfc_dmabuf object
+ * corresponding to the dma_address. The function returns the
+ * lpfc_dmabuf object if a buffer is found else it returns NULL.
+ * This function is called by the ct and els unsolicited event
+ * handlers to get the buffer associated with the unsolicited
+ * event.
+ *
+ * This function is called with no lock held.
+ **/
+struct lpfc_dmabuf *
+lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			 dma_addr_t phys)
+{
+	struct lpfc_dmabuf *mp, *next_mp;
+	struct list_head *slp = &pring->postbufq;
+
+	/* Search postbufq, from the beginning, looking for a match on phys */
+	spin_lock_irq(&phba->hbalock);
+	list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
+		if (mp->phys == phys) {
+			list_del_init(&mp->list);
+			pring->postbufq_cnt--;
+			spin_unlock_irq(&phba->hbalock);
+			return mp;
+		}
+	}
+
+	spin_unlock_irq(&phba->hbalock);
+	lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"0410 Cannot find virtual addr for mapped buf on "
+			"ring %d Data x%llx x%px x%px x%x\n",
+			pring->ringno, (unsigned long long)phys,
+			slp->next, slp->prev, pring->postbufq_cnt);
+	return NULL;
+}
+
+/**
+ * lpfc_sli_abort_els_cmpl - Completion handler for the els abort iocbs
+ * @phba: Pointer to HBA context object.
+ * @cmdiocb: Pointer to driver command iocb object.
+ * @rspiocb: Pointer to driver response iocb object.
+ *
+ * This function is the completion handler for the abort iocbs for
+ * ELS commands. This function is called from the ELS ring event
+ * handler with no lock held. This function frees memory resources
+ * associated with the abort iocb.
+ **/
+static void
+lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
+			struct lpfc_iocbq *rspiocb)
+{
+	u32 ulp_status = get_job_ulpstatus(phba, rspiocb);
+	u32 ulp_word4 = get_job_word4(phba, rspiocb);
+	u8 cmnd = get_job_cmnd(phba, cmdiocb);
+
+	if (ulp_status) {
+		/*
+		 * Assume that the port already completed and returned, or
+		 * will return the iocb. Just Log the message.
+		 */
+		if (phba->sli_rev < LPFC_SLI_REV4) {
+			if (cmnd == CMD_ABORT_XRI_CX &&
+			    ulp_status == IOSTAT_LOCAL_REJECT &&
+			    ulp_word4 == IOERR_ABORT_REQUESTED) {
+				goto release_iocb;
+			}
+		}
+
+		lpfc_printf_log(phba, KERN_WARNING, LOG_ELS | LOG_SLI,
+				"0327 Cannot abort els iocb x%px "
+				"with io cmd xri %x abort tag : x%x, "
+				"abort status %x abort code %x\n",
+				cmdiocb, get_job_abtsiotag(phba, cmdiocb),
+				(phba->sli_rev == LPFC_SLI_REV4) ?
+				get_wqe_reqtag(cmdiocb) :
+				cmdiocb->iocb.un.acxri.abortContextTag,
+				ulp_status, ulp_word4);
+
+	}
+release_iocb:
+	lpfc_sli_release_iocbq(phba, cmdiocb);
+	return;
+}
+
+/**
+ * lpfc_ignore_els_cmpl - Completion handler for aborted ELS command
+ * @phba: Pointer to HBA context object.
+ * @cmdiocb: Pointer to driver command iocb object.
+ * @rspiocb: Pointer to driver response iocb object.
+ *
+ * The function is called from SLI ring event handler with no
+ * lock held. This function is the completion handler for ELS commands
+ * which are aborted. The function frees memory resources used for
+ * the aborted ELS commands.
+ **/
+void
+lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
+		     struct lpfc_iocbq *rspiocb)
+{
+	struct lpfc_nodelist *ndlp = cmdiocb->ndlp;
+	IOCB_t *irsp;
+	LPFC_MBOXQ_t *mbox;
+	u32 ulp_command, ulp_status, ulp_word4, iotag;
+
+	ulp_command = get_job_cmnd(phba, cmdiocb);
+	ulp_status = get_job_ulpstatus(phba, rspiocb);
+	ulp_word4 = get_job_word4(phba, rspiocb);
+
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		iotag = get_wqe_reqtag(cmdiocb);
+	} else {
+		irsp = &rspiocb->iocb;
+		iotag = irsp->ulpIoTag;
+
+		/* It is possible a PLOGI_RJT for NPIV ports to get aborted.
+		 * The MBX_REG_LOGIN64 mbox command is freed back to the
+		 * mbox_mem_pool here.
+		 */
+		if (cmdiocb->context_un.mbox) {
+			mbox = cmdiocb->context_un.mbox;
+			lpfc_mbox_rsrc_cleanup(phba, mbox, MBOX_THD_UNLOCKED);
+			cmdiocb->context_un.mbox = NULL;
+		}
+	}
+
+	/* ELS cmd tag <ulpIoTag> completes */
+	lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
+			"0139 Ignoring ELS cmd code x%x completion Data: "
+			"x%x x%x x%x x%px\n",
+			ulp_command, ulp_status, ulp_word4, iotag,
+			cmdiocb->ndlp);
+	/*
+	 * Deref the ndlp after free_iocb. sli_release_iocb will access the ndlp
+	 * if exchange is busy.
+	 */
+	if (ulp_command == CMD_GEN_REQUEST64_CR)
+		lpfc_ct_free_iocb(phba, cmdiocb);
+	else
+		lpfc_els_free_iocb(phba, cmdiocb);
+
+	lpfc_nlp_put(ndlp);
+}
+
+/**
+ * lpfc_sli_issue_abort_iotag - Abort function for a command iocb
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @cmdiocb: Pointer to driver command iocb object.
+ * @cmpl: completion function.
+ *
+ * This function issues an abort iocb for the provided command iocb. In case
+ * of unloading, the abort iocb will not be issued to commands on the ELS
+ * ring. Instead, the callback function shall be changed to those commands
+ * so that nothing happens when them finishes. This function is called with
+ * hbalock held andno ring_lock held (SLI4). The function returns IOCB_SUCCESS
+ * when the command iocb is an abort request.
+ *
+ **/
+int
+lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+			   struct lpfc_iocbq *cmdiocb, void *cmpl)
+{
+	struct lpfc_vport *vport = cmdiocb->vport;
+	struct lpfc_iocbq *abtsiocbp;
+	int retval = IOCB_ERROR;
+	unsigned long iflags;
+	struct lpfc_nodelist *ndlp = NULL;
+	u32 ulp_command = get_job_cmnd(phba, cmdiocb);
+	u16 ulp_context, iotag;
+	bool ia;
+
+	/*
+	 * There are certain command types we don't want to abort.  And we
+	 * don't want to abort commands that are already in the process of
+	 * being aborted.
+	 */
+	if (ulp_command == CMD_ABORT_XRI_WQE ||
+	    ulp_command == CMD_ABORT_XRI_CN ||
+	    ulp_command == CMD_CLOSE_XRI_CN ||
+	    cmdiocb->cmd_flag & LPFC_DRIVER_ABORTED)
+		return IOCB_ABORTING;
+
+	if (!pring) {
+		if (cmdiocb->cmd_flag & LPFC_IO_FABRIC)
+			cmdiocb->fabric_cmd_cmpl = lpfc_ignore_els_cmpl;
+		else
+			cmdiocb->cmd_cmpl = lpfc_ignore_els_cmpl;
+		return retval;
+	}
+
+	/*
+	 * If we're unloading, don't abort iocb on the ELS ring, but change
+	 * the callback so that nothing happens when it finishes.
+	 */
+	if ((vport->load_flag & FC_UNLOADING) &&
+	    pring->ringno == LPFC_ELS_RING) {
+		if (cmdiocb->cmd_flag & LPFC_IO_FABRIC)
+			cmdiocb->fabric_cmd_cmpl = lpfc_ignore_els_cmpl;
+		else
+			cmdiocb->cmd_cmpl = lpfc_ignore_els_cmpl;
+		return retval;
+	}
+
+	/* issue ABTS for this IOCB based on iotag */
+	abtsiocbp = __lpfc_sli_get_iocbq(phba);
+	if (abtsiocbp == NULL)
+		return IOCB_NORESOURCE;
+
+	/* This signals the response to set the correct status
+	 * before calling the completion handler
+	 */
+	cmdiocb->cmd_flag |= LPFC_DRIVER_ABORTED;
+
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		ulp_context = cmdiocb->sli4_xritag;
+		iotag = abtsiocbp->iotag;
+	} else {
+		iotag = cmdiocb->iocb.ulpIoTag;
+		if (pring->ringno == LPFC_ELS_RING) {
+			ndlp = cmdiocb->ndlp;
+			ulp_context = ndlp->nlp_rpi;
+		} else {
+			ulp_context = cmdiocb->iocb.ulpContext;
+		}
+	}
+
+	if (phba->link_state < LPFC_LINK_UP ||
+	    (phba->sli_rev == LPFC_SLI_REV4 &&
+	     phba->sli4_hba.link_state.status == LPFC_FC_LA_TYPE_LINK_DOWN) ||
+	    (phba->link_flag & LS_EXTERNAL_LOOPBACK))
+		ia = true;
+	else
+		ia = false;
+
+	lpfc_sli_prep_abort_xri(phba, abtsiocbp, ulp_context, iotag,
+				cmdiocb->iocb.ulpClass,
+				LPFC_WQE_CQ_ID_DEFAULT, ia, false);
+
+	abtsiocbp->vport = vport;
+
+	/* ABTS WQE must go to the same WQ as the WQE to be aborted */
+	abtsiocbp->hba_wqidx = cmdiocb->hba_wqidx;
+	if (cmdiocb->cmd_flag & LPFC_IO_FCP)
+		abtsiocbp->cmd_flag |= (LPFC_IO_FCP | LPFC_USE_FCPWQIDX);
+
+	if (cmdiocb->cmd_flag & LPFC_IO_FOF)
+		abtsiocbp->cmd_flag |= LPFC_IO_FOF;
+
+	if (cmpl)
+		abtsiocbp->cmd_cmpl = cmpl;
+	else
+		abtsiocbp->cmd_cmpl = lpfc_sli_abort_els_cmpl;
+	abtsiocbp->vport = vport;
+
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		pring = lpfc_sli4_calc_ring(phba, abtsiocbp);
+		if (unlikely(pring == NULL))
+			goto abort_iotag_exit;
+		/* Note: both hbalock and ring_lock need to be set here */
+		spin_lock_irqsave(&pring->ring_lock, iflags);
+		retval = __lpfc_sli_issue_iocb(phba, pring->ringno,
+			abtsiocbp, 0);
+		spin_unlock_irqrestore(&pring->ring_lock, iflags);
+	} else {
+		retval = __lpfc_sli_issue_iocb(phba, pring->ringno,
+			abtsiocbp, 0);
+	}
+
+abort_iotag_exit:
+
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI,
+			 "0339 Abort IO XRI x%x, Original iotag x%x, "
+			 "abort tag x%x Cmdjob : x%px Abortjob : x%px "
+			 "retval x%x\n",
+			 ulp_context, (phba->sli_rev == LPFC_SLI_REV4) ?
+			 cmdiocb->iotag : iotag, iotag, cmdiocb, abtsiocbp,
+			 retval);
+	if (retval) {
+		cmdiocb->cmd_flag &= ~LPFC_DRIVER_ABORTED;
+		__lpfc_sli_release_iocbq(phba, abtsiocbp);
+	}
+
+	/*
+	 * Caller to this routine should check for IOCB_ERROR
+	 * and handle it properly.  This routine no longer removes
+	 * iocb off txcmplq and call compl in case of IOCB_ERROR.
+	 */
+	return retval;
+}
+
+/**
+ * lpfc_sli_hba_iocb_abort - Abort all iocbs to an hba.
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine will abort all pending and outstanding iocbs to an HBA.
+ **/
+void
+lpfc_sli_hba_iocb_abort(struct lpfc_hba *phba)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	struct lpfc_sli_ring *pring;
+	struct lpfc_queue *qp = NULL;
+	int i;
+
+	if (phba->sli_rev != LPFC_SLI_REV4) {
+		for (i = 0; i < psli->num_rings; i++) {
+			pring = &psli->sli3_ring[i];
+			lpfc_sli_abort_iocb_ring(phba, pring);
+		}
+		return;
+	}
+	list_for_each_entry(qp, &phba->sli4_hba.lpfc_wq_list, wq_list) {
+		pring = qp->pring;
+		if (!pring)
+			continue;
+		lpfc_sli_abort_iocb_ring(phba, pring);
+	}
+}
+
+/**
+ * lpfc_sli_validate_fcp_iocb_for_abort - filter iocbs appropriate for FCP aborts
+ * @iocbq: Pointer to iocb object.
+ * @vport: Pointer to driver virtual port object.
+ *
+ * This function acts as an iocb filter for functions which abort FCP iocbs.
+ *
+ * Return values
+ * -ENODEV, if a null iocb or vport ptr is encountered
+ * -EINVAL, if the iocb is not an FCP I/O, not on the TX cmpl queue, premarked as
+ *          driver already started the abort process, or is an abort iocb itself
+ * 0, passes criteria for aborting the FCP I/O iocb
+ **/
+static int
+lpfc_sli_validate_fcp_iocb_for_abort(struct lpfc_iocbq *iocbq,
+				     struct lpfc_vport *vport)
+{
+	u8 ulp_command;
+
+	/* No null ptr vports */
+	if (!iocbq || iocbq->vport != vport)
+		return -ENODEV;
+
+	/* iocb must be for FCP IO, already exists on the TX cmpl queue,
+	 * can't be premarked as driver aborted, nor be an ABORT iocb itself
+	 */
+	ulp_command = get_job_cmnd(vport->phba, iocbq);
+	if (!(iocbq->cmd_flag & LPFC_IO_FCP) ||
+	    !(iocbq->cmd_flag & LPFC_IO_ON_TXCMPLQ) ||
+	    (iocbq->cmd_flag & LPFC_DRIVER_ABORTED) ||
+	    (ulp_command == CMD_ABORT_XRI_CN ||
+	     ulp_command == CMD_CLOSE_XRI_CN ||
+	     ulp_command == CMD_ABORT_XRI_WQE))
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_validate_fcp_iocb - validate commands associated with a SCSI target
+ * @iocbq: Pointer to driver iocb object.
+ * @vport: Pointer to driver virtual port object.
+ * @tgt_id: SCSI ID of the target.
+ * @lun_id: LUN ID of the scsi device.
+ * @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST
+ *
+ * This function acts as an iocb filter for validating a lun/SCSI target/SCSI
+ * host.
+ *
+ * It will return
+ * 0 if the filtering criteria is met for the given iocb and will return
+ * 1 if the filtering criteria is not met.
+ * If ctx_cmd == LPFC_CTX_LUN, the function returns 0 only if the
+ * given iocb is for the SCSI device specified by vport, tgt_id and
+ * lun_id parameter.
+ * If ctx_cmd == LPFC_CTX_TGT,  the function returns 0 only if the
+ * given iocb is for the SCSI target specified by vport and tgt_id
+ * parameters.
+ * If ctx_cmd == LPFC_CTX_HOST, the function returns 0 only if the
+ * given iocb is for the SCSI host associated with the given vport.
+ * This function is called with no locks held.
+ **/
+static int
+lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, struct lpfc_vport *vport,
+			   uint16_t tgt_id, uint64_t lun_id,
+			   lpfc_ctx_cmd ctx_cmd)
+{
+	struct lpfc_io_buf *lpfc_cmd;
+	int rc = 1;
+
+	lpfc_cmd = container_of(iocbq, struct lpfc_io_buf, cur_iocbq);
+
+	if (lpfc_cmd->pCmd == NULL)
+		return rc;
+
+	switch (ctx_cmd) {
+	case LPFC_CTX_LUN:
+		if ((lpfc_cmd->rdata) && (lpfc_cmd->rdata->pnode) &&
+		    (lpfc_cmd->rdata->pnode->nlp_sid == tgt_id) &&
+		    (scsilun_to_int(&lpfc_cmd->fcp_cmnd->fcp_lun) == lun_id))
+			rc = 0;
+		break;
+	case LPFC_CTX_TGT:
+		if ((lpfc_cmd->rdata) && (lpfc_cmd->rdata->pnode) &&
+		    (lpfc_cmd->rdata->pnode->nlp_sid == tgt_id))
+			rc = 0;
+		break;
+	case LPFC_CTX_HOST:
+		rc = 0;
+		break;
+	default:
+		printk(KERN_ERR "%s: Unknown context cmd type, value %d\n",
+			__func__, ctx_cmd);
+		break;
+	}
+
+	return rc;
+}
+
+/**
+ * lpfc_sli_sum_iocb - Function to count the number of FCP iocbs pending
+ * @vport: Pointer to virtual port.
+ * @tgt_id: SCSI ID of the target.
+ * @lun_id: LUN ID of the scsi device.
+ * @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST.
+ *
+ * This function returns number of FCP commands pending for the vport.
+ * When ctx_cmd == LPFC_CTX_LUN, the function returns number of FCP
+ * commands pending on the vport associated with SCSI device specified
+ * by tgt_id and lun_id parameters.
+ * When ctx_cmd == LPFC_CTX_TGT, the function returns number of FCP
+ * commands pending on the vport associated with SCSI target specified
+ * by tgt_id parameter.
+ * When ctx_cmd == LPFC_CTX_HOST, the function returns number of FCP
+ * commands pending on the vport.
+ * This function returns the number of iocbs which satisfy the filter.
+ * This function is called without any lock held.
+ **/
+int
+lpfc_sli_sum_iocb(struct lpfc_vport *vport, uint16_t tgt_id, uint64_t lun_id,
+		  lpfc_ctx_cmd ctx_cmd)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_iocbq *iocbq;
+	int sum, i;
+	unsigned long iflags;
+	u8 ulp_command;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	for (i = 1, sum = 0; i <= phba->sli.last_iotag; i++) {
+		iocbq = phba->sli.iocbq_lookup[i];
+
+		if (!iocbq || iocbq->vport != vport)
+			continue;
+		if (!(iocbq->cmd_flag & LPFC_IO_FCP) ||
+		    !(iocbq->cmd_flag & LPFC_IO_ON_TXCMPLQ))
+			continue;
+
+		/* Include counting outstanding aborts */
+		ulp_command = get_job_cmnd(phba, iocbq);
+		if (ulp_command == CMD_ABORT_XRI_CN ||
+		    ulp_command == CMD_CLOSE_XRI_CN ||
+		    ulp_command == CMD_ABORT_XRI_WQE) {
+			sum++;
+			continue;
+		}
+
+		if (lpfc_sli_validate_fcp_iocb(iocbq, vport, tgt_id, lun_id,
+					       ctx_cmd) == 0)
+			sum++;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	return sum;
+}
+
+/**
+ * lpfc_sli_abort_fcp_cmpl - Completion handler function for aborted FCP IOCBs
+ * @phba: Pointer to HBA context object
+ * @cmdiocb: Pointer to command iocb object.
+ * @rspiocb: Pointer to response iocb object.
+ *
+ * This function is called when an aborted FCP iocb completes. This
+ * function is called by the ring event handler with no lock held.
+ * This function frees the iocb.
+ **/
+void
+lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
+			struct lpfc_iocbq *rspiocb)
+{
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"3096 ABORT_XRI_CX completing on rpi x%x "
+			"original iotag x%x, abort cmd iotag x%x "
+			"status 0x%x, reason 0x%x\n",
+			(phba->sli_rev == LPFC_SLI_REV4) ?
+			cmdiocb->sli4_xritag :
+			cmdiocb->iocb.un.acxri.abortContextTag,
+			get_job_abtsiotag(phba, cmdiocb),
+			cmdiocb->iotag, get_job_ulpstatus(phba, rspiocb),
+			get_job_word4(phba, rspiocb));
+	lpfc_sli_release_iocbq(phba, cmdiocb);
+	return;
+}
+
+/**
+ * lpfc_sli_abort_iocb - issue abort for all commands on a host/target/LUN
+ * @vport: Pointer to virtual port.
+ * @tgt_id: SCSI ID of the target.
+ * @lun_id: LUN ID of the scsi device.
+ * @abort_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST.
+ *
+ * This function sends an abort command for every SCSI command
+ * associated with the given virtual port pending on the ring
+ * filtered by lpfc_sli_validate_fcp_iocb_for_abort and then
+ * lpfc_sli_validate_fcp_iocb function.  The ordering for validation before
+ * submitting abort iocbs must be lpfc_sli_validate_fcp_iocb_for_abort
+ * followed by lpfc_sli_validate_fcp_iocb.
+ *
+ * When abort_cmd == LPFC_CTX_LUN, the function sends abort only to the
+ * FCP iocbs associated with lun specified by tgt_id and lun_id
+ * parameters
+ * When abort_cmd == LPFC_CTX_TGT, the function sends abort only to the
+ * FCP iocbs associated with SCSI target specified by tgt_id parameter.
+ * When abort_cmd == LPFC_CTX_HOST, the function sends abort to all
+ * FCP iocbs associated with virtual port.
+ * The pring used for SLI3 is sli3_ring[LPFC_FCP_RING], for SLI4
+ * lpfc_sli4_calc_ring is used.
+ * This function returns number of iocbs it failed to abort.
+ * This function is called with no locks held.
+ **/
+int
+lpfc_sli_abort_iocb(struct lpfc_vport *vport, u16 tgt_id, u64 lun_id,
+		    lpfc_ctx_cmd abort_cmd)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_sli_ring *pring = NULL;
+	struct lpfc_iocbq *iocbq;
+	int errcnt = 0, ret_val = 0;
+	unsigned long iflags;
+	int i;
+
+	/* all I/Os are in process of being flushed */
+	if (phba->hba_flag & HBA_IOQ_FLUSH)
+		return errcnt;
+
+	for (i = 1; i <= phba->sli.last_iotag; i++) {
+		iocbq = phba->sli.iocbq_lookup[i];
+
+		if (lpfc_sli_validate_fcp_iocb_for_abort(iocbq, vport))
+			continue;
+
+		if (lpfc_sli_validate_fcp_iocb(iocbq, vport, tgt_id, lun_id,
+					       abort_cmd) != 0)
+			continue;
+
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		if (phba->sli_rev == LPFC_SLI_REV3) {
+			pring = &phba->sli.sli3_ring[LPFC_FCP_RING];
+		} else if (phba->sli_rev == LPFC_SLI_REV4) {
+			pring = lpfc_sli4_calc_ring(phba, iocbq);
+		}
+		ret_val = lpfc_sli_issue_abort_iotag(phba, pring, iocbq,
+						     lpfc_sli_abort_fcp_cmpl);
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		if (ret_val != IOCB_SUCCESS)
+			errcnt++;
+	}
+
+	return errcnt;
+}
+
+/**
+ * lpfc_sli_abort_taskmgmt - issue abort for all commands on a host/target/LUN
+ * @vport: Pointer to virtual port.
+ * @pring: Pointer to driver SLI ring object.
+ * @tgt_id: SCSI ID of the target.
+ * @lun_id: LUN ID of the scsi device.
+ * @cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST.
+ *
+ * This function sends an abort command for every SCSI command
+ * associated with the given virtual port pending on the ring
+ * filtered by lpfc_sli_validate_fcp_iocb_for_abort and then
+ * lpfc_sli_validate_fcp_iocb function.  The ordering for validation before
+ * submitting abort iocbs must be lpfc_sli_validate_fcp_iocb_for_abort
+ * followed by lpfc_sli_validate_fcp_iocb.
+ *
+ * When taskmgmt_cmd == LPFC_CTX_LUN, the function sends abort only to the
+ * FCP iocbs associated with lun specified by tgt_id and lun_id
+ * parameters
+ * When taskmgmt_cmd == LPFC_CTX_TGT, the function sends abort only to the
+ * FCP iocbs associated with SCSI target specified by tgt_id parameter.
+ * When taskmgmt_cmd == LPFC_CTX_HOST, the function sends abort to all
+ * FCP iocbs associated with virtual port.
+ * This function returns number of iocbs it aborted .
+ * This function is called with no locks held right after a taskmgmt
+ * command is sent.
+ **/
+int
+lpfc_sli_abort_taskmgmt(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
+			uint16_t tgt_id, uint64_t lun_id, lpfc_ctx_cmd cmd)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_io_buf *lpfc_cmd;
+	struct lpfc_iocbq *abtsiocbq;
+	struct lpfc_nodelist *ndlp = NULL;
+	struct lpfc_iocbq *iocbq;
+	int sum, i, ret_val;
+	unsigned long iflags;
+	struct lpfc_sli_ring *pring_s4 = NULL;
+	u16 ulp_context, iotag, cqid = LPFC_WQE_CQ_ID_DEFAULT;
+	bool ia;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+
+	/* all I/Os are in process of being flushed */
+	if (phba->hba_flag & HBA_IOQ_FLUSH) {
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		return 0;
+	}
+	sum = 0;
+
+	for (i = 1; i <= phba->sli.last_iotag; i++) {
+		iocbq = phba->sli.iocbq_lookup[i];
+
+		if (lpfc_sli_validate_fcp_iocb_for_abort(iocbq, vport))
+			continue;
+
+		if (lpfc_sli_validate_fcp_iocb(iocbq, vport, tgt_id, lun_id,
+					       cmd) != 0)
+			continue;
+
+		/* Guard against IO completion being called at same time */
+		lpfc_cmd = container_of(iocbq, struct lpfc_io_buf, cur_iocbq);
+		spin_lock(&lpfc_cmd->buf_lock);
+
+		if (!lpfc_cmd->pCmd) {
+			spin_unlock(&lpfc_cmd->buf_lock);
+			continue;
+		}
+
+		if (phba->sli_rev == LPFC_SLI_REV4) {
+			pring_s4 =
+			    phba->sli4_hba.hdwq[iocbq->hba_wqidx].io_wq->pring;
+			if (!pring_s4) {
+				spin_unlock(&lpfc_cmd->buf_lock);
+				continue;
+			}
+			/* Note: both hbalock and ring_lock must be set here */
+			spin_lock(&pring_s4->ring_lock);
+		}
+
+		/*
+		 * If the iocbq is already being aborted, don't take a second
+		 * action, but do count it.
+		 */
+		if ((iocbq->cmd_flag & LPFC_DRIVER_ABORTED) ||
+		    !(iocbq->cmd_flag & LPFC_IO_ON_TXCMPLQ)) {
+			if (phba->sli_rev == LPFC_SLI_REV4)
+				spin_unlock(&pring_s4->ring_lock);
+			spin_unlock(&lpfc_cmd->buf_lock);
+			continue;
+		}
+
+		/* issue ABTS for this IOCB based on iotag */
+		abtsiocbq = __lpfc_sli_get_iocbq(phba);
+		if (!abtsiocbq) {
+			if (phba->sli_rev == LPFC_SLI_REV4)
+				spin_unlock(&pring_s4->ring_lock);
+			spin_unlock(&lpfc_cmd->buf_lock);
+			continue;
+		}
+
+		if (phba->sli_rev == LPFC_SLI_REV4) {
+			iotag = abtsiocbq->iotag;
+			ulp_context = iocbq->sli4_xritag;
+			cqid = lpfc_cmd->hdwq->io_cq_map;
+		} else {
+			iotag = iocbq->iocb.ulpIoTag;
+			if (pring->ringno == LPFC_ELS_RING) {
+				ndlp = iocbq->ndlp;
+				ulp_context = ndlp->nlp_rpi;
+			} else {
+				ulp_context = iocbq->iocb.ulpContext;
+			}
+		}
+
+		ndlp = lpfc_cmd->rdata->pnode;
+
+		if (lpfc_is_link_up(phba) &&
+		    (ndlp && ndlp->nlp_state == NLP_STE_MAPPED_NODE) &&
+		    !(phba->link_flag & LS_EXTERNAL_LOOPBACK))
+			ia = false;
+		else
+			ia = true;
+
+		lpfc_sli_prep_abort_xri(phba, abtsiocbq, ulp_context, iotag,
+					iocbq->iocb.ulpClass, cqid,
+					ia, false);
+
+		abtsiocbq->vport = vport;
+
+		/* ABTS WQE must go to the same WQ as the WQE to be aborted */
+		abtsiocbq->hba_wqidx = iocbq->hba_wqidx;
+		if (iocbq->cmd_flag & LPFC_IO_FCP)
+			abtsiocbq->cmd_flag |= LPFC_USE_FCPWQIDX;
+		if (iocbq->cmd_flag & LPFC_IO_FOF)
+			abtsiocbq->cmd_flag |= LPFC_IO_FOF;
+
+		/* Setup callback routine and issue the command. */
+		abtsiocbq->cmd_cmpl = lpfc_sli_abort_fcp_cmpl;
+
+		/*
+		 * Indicate the IO is being aborted by the driver and set
+		 * the caller's flag into the aborted IO.
+		 */
+		iocbq->cmd_flag |= LPFC_DRIVER_ABORTED;
+
+		if (phba->sli_rev == LPFC_SLI_REV4) {
+			ret_val = __lpfc_sli_issue_iocb(phba, pring_s4->ringno,
+							abtsiocbq, 0);
+			spin_unlock(&pring_s4->ring_lock);
+		} else {
+			ret_val = __lpfc_sli_issue_iocb(phba, pring->ringno,
+							abtsiocbq, 0);
+		}
+
+		spin_unlock(&lpfc_cmd->buf_lock);
+
+		if (ret_val == IOCB_ERROR)
+			__lpfc_sli_release_iocbq(phba, abtsiocbq);
+		else
+			sum++;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return sum;
+}
+
+/**
+ * lpfc_sli_wake_iocb_wait - lpfc_sli_issue_iocb_wait's completion handler
+ * @phba: Pointer to HBA context object.
+ * @cmdiocbq: Pointer to command iocb.
+ * @rspiocbq: Pointer to response iocb.
+ *
+ * This function is the completion handler for iocbs issued using
+ * lpfc_sli_issue_iocb_wait function. This function is called by the
+ * ring event handler function without any lock held. This function
+ * can be called from both worker thread context and interrupt
+ * context. This function also can be called from other thread which
+ * cleans up the SLI layer objects.
+ * This function copy the contents of the response iocb to the
+ * response iocb memory object provided by the caller of
+ * lpfc_sli_issue_iocb_wait and then wakes up the thread which
+ * sleeps for the iocb completion.
+ **/
+static void
+lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
+			struct lpfc_iocbq *cmdiocbq,
+			struct lpfc_iocbq *rspiocbq)
+{
+	wait_queue_head_t *pdone_q;
+	unsigned long iflags;
+	struct lpfc_io_buf *lpfc_cmd;
+	size_t offset = offsetof(struct lpfc_iocbq, wqe);
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	if (cmdiocbq->cmd_flag & LPFC_IO_WAKE_TMO) {
+
+		/*
+		 * A time out has occurred for the iocb.  If a time out
+		 * completion handler has been supplied, call it.  Otherwise,
+		 * just free the iocbq.
+		 */
+
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		cmdiocbq->cmd_cmpl = cmdiocbq->wait_cmd_cmpl;
+		cmdiocbq->wait_cmd_cmpl = NULL;
+		if (cmdiocbq->cmd_cmpl)
+			cmdiocbq->cmd_cmpl(phba, cmdiocbq, NULL);
+		else
+			lpfc_sli_release_iocbq(phba, cmdiocbq);
+		return;
+	}
+
+	/* Copy the contents of the local rspiocb into the caller's buffer. */
+	cmdiocbq->cmd_flag |= LPFC_IO_WAKE;
+	if (cmdiocbq->rsp_iocb && rspiocbq)
+		memcpy((char *)cmdiocbq->rsp_iocb + offset,
+		       (char *)rspiocbq + offset, sizeof(*rspiocbq) - offset);
+
+	/* Set the exchange busy flag for task management commands */
+	if ((cmdiocbq->cmd_flag & LPFC_IO_FCP) &&
+	    !(cmdiocbq->cmd_flag & LPFC_IO_LIBDFC)) {
+		lpfc_cmd = container_of(cmdiocbq, struct lpfc_io_buf,
+					cur_iocbq);
+		if (rspiocbq && (rspiocbq->cmd_flag & LPFC_EXCHANGE_BUSY))
+			lpfc_cmd->flags |= LPFC_SBUF_XBUSY;
+		else
+			lpfc_cmd->flags &= ~LPFC_SBUF_XBUSY;
+	}
+
+	pdone_q = cmdiocbq->context_un.wait_queue;
+	if (pdone_q)
+		wake_up(pdone_q);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return;
+}
+
+/**
+ * lpfc_chk_iocb_flg - Test IOCB flag with lock held.
+ * @phba: Pointer to HBA context object..
+ * @piocbq: Pointer to command iocb.
+ * @flag: Flag to test.
+ *
+ * This routine grabs the hbalock and then test the cmd_flag to
+ * see if the passed in flag is set.
+ * Returns:
+ * 1 if flag is set.
+ * 0 if flag is not set.
+ **/
+static int
+lpfc_chk_iocb_flg(struct lpfc_hba *phba,
+		 struct lpfc_iocbq *piocbq, uint32_t flag)
+{
+	unsigned long iflags;
+	int ret;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	ret = piocbq->cmd_flag & flag;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return ret;
+
+}
+
+/**
+ * lpfc_sli_issue_iocb_wait - Synchronous function to issue iocb commands
+ * @phba: Pointer to HBA context object..
+ * @ring_number: Ring number
+ * @piocb: Pointer to command iocb.
+ * @prspiocbq: Pointer to response iocb.
+ * @timeout: Timeout in number of seconds.
+ *
+ * This function issues the iocb to firmware and waits for the
+ * iocb to complete. The cmd_cmpl field of the shall be used
+ * to handle iocbs which time out. If the field is NULL, the
+ * function shall free the iocbq structure.  If more clean up is
+ * needed, the caller is expected to provide a completion function
+ * that will provide the needed clean up.  If the iocb command is
+ * not completed within timeout seconds, the function will either
+ * free the iocbq structure (if cmd_cmpl == NULL) or execute the
+ * completion function set in the cmd_cmpl field and then return
+ * a status of IOCB_TIMEDOUT.  The caller should not free the iocb
+ * resources if this function returns IOCB_TIMEDOUT.
+ * The function waits for the iocb completion using an
+ * non-interruptible wait.
+ * This function will sleep while waiting for iocb completion.
+ * So, this function should not be called from any context which
+ * does not allow sleeping. Due to the same reason, this function
+ * cannot be called with interrupt disabled.
+ * This function assumes that the iocb completions occur while
+ * this function sleep. So, this function cannot be called from
+ * the thread which process iocb completion for this ring.
+ * This function clears the cmd_flag of the iocb object before
+ * issuing the iocb and the iocb completion handler sets this
+ * flag and wakes this thread when the iocb completes.
+ * The contents of the response iocb will be copied to prspiocbq
+ * by the completion handler when the command completes.
+ * This function returns IOCB_SUCCESS when success.
+ * This function is called with no lock held.
+ **/
+int
+lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
+			 uint32_t ring_number,
+			 struct lpfc_iocbq *piocb,
+			 struct lpfc_iocbq *prspiocbq,
+			 uint32_t timeout)
+{
+	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(done_q);
+	long timeleft, timeout_req = 0;
+	int retval = IOCB_SUCCESS;
+	uint32_t creg_val;
+	struct lpfc_iocbq *iocb;
+	int txq_cnt = 0;
+	int txcmplq_cnt = 0;
+	struct lpfc_sli_ring *pring;
+	unsigned long iflags;
+	bool iocb_completed = true;
+
+	if (phba->sli_rev >= LPFC_SLI_REV4) {
+		lpfc_sli_prep_wqe(phba, piocb);
+
+		pring = lpfc_sli4_calc_ring(phba, piocb);
+	} else
+		pring = &phba->sli.sli3_ring[ring_number];
+	/*
+	 * If the caller has provided a response iocbq buffer, then rsp_iocb
+	 * is NULL or its an error.
+	 */
+	if (prspiocbq) {
+		if (piocb->rsp_iocb)
+			return IOCB_ERROR;
+		piocb->rsp_iocb = prspiocbq;
+	}
+
+	piocb->wait_cmd_cmpl = piocb->cmd_cmpl;
+	piocb->cmd_cmpl = lpfc_sli_wake_iocb_wait;
+	piocb->context_un.wait_queue = &done_q;
+	piocb->cmd_flag &= ~(LPFC_IO_WAKE | LPFC_IO_WAKE_TMO);
+
+	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
+		if (lpfc_readl(phba->HCregaddr, &creg_val))
+			return IOCB_ERROR;
+		creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
+		writel(creg_val, phba->HCregaddr);
+		readl(phba->HCregaddr); /* flush */
+	}
+
+	retval = lpfc_sli_issue_iocb(phba, ring_number, piocb,
+				     SLI_IOCB_RET_IOCB);
+	if (retval == IOCB_SUCCESS) {
+		timeout_req = msecs_to_jiffies(timeout * 1000);
+		timeleft = wait_event_timeout(done_q,
+				lpfc_chk_iocb_flg(phba, piocb, LPFC_IO_WAKE),
+				timeout_req);
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		if (!(piocb->cmd_flag & LPFC_IO_WAKE)) {
+
+			/*
+			 * IOCB timed out.  Inform the wake iocb wait
+			 * completion function and set local status
+			 */
+
+			iocb_completed = false;
+			piocb->cmd_flag |= LPFC_IO_WAKE_TMO;
+		}
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		if (iocb_completed) {
+			lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+					"0331 IOCB wake signaled\n");
+			/* Note: we are not indicating if the IOCB has a success
+			 * status or not - that's for the caller to check.
+			 * IOCB_SUCCESS means just that the command was sent and
+			 * completed. Not that it completed successfully.
+			 * */
+		} else if (timeleft == 0) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"0338 IOCB wait timeout error - no "
+					"wake response Data x%x\n", timeout);
+			retval = IOCB_TIMEDOUT;
+		} else {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"0330 IOCB wake NOT set, "
+					"Data x%x x%lx\n",
+					timeout, (timeleft / jiffies));
+			retval = IOCB_TIMEDOUT;
+		}
+	} else if (retval == IOCB_BUSY) {
+		if (phba->cfg_log_verbose & LOG_SLI) {
+			list_for_each_entry(iocb, &pring->txq, list) {
+				txq_cnt++;
+			}
+			list_for_each_entry(iocb, &pring->txcmplq, list) {
+				txcmplq_cnt++;
+			}
+			lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"2818 Max IOCBs %d txq cnt %d txcmplq cnt %d\n",
+				phba->iocb_cnt, txq_cnt, txcmplq_cnt);
+		}
+		return retval;
+	} else {
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"0332 IOCB wait issue failed, Data x%x\n",
+				retval);
+		retval = IOCB_ERROR;
+	}
+
+	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
+		if (lpfc_readl(phba->HCregaddr, &creg_val))
+			return IOCB_ERROR;
+		creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING);
+		writel(creg_val, phba->HCregaddr);
+		readl(phba->HCregaddr); /* flush */
+	}
+
+	if (prspiocbq)
+		piocb->rsp_iocb = NULL;
+
+	piocb->context_un.wait_queue = NULL;
+	piocb->cmd_cmpl = NULL;
+	return retval;
+}
+
+/**
+ * lpfc_sli_issue_mbox_wait - Synchronous function to issue mailbox
+ * @phba: Pointer to HBA context object.
+ * @pmboxq: Pointer to driver mailbox object.
+ * @timeout: Timeout in number of seconds.
+ *
+ * This function issues the mailbox to firmware and waits for the
+ * mailbox command to complete. If the mailbox command is not
+ * completed within timeout seconds, it returns MBX_TIMEOUT.
+ * The function waits for the mailbox completion using an
+ * interruptible wait. If the thread is woken up due to a
+ * signal, MBX_TIMEOUT error is returned to the caller. Caller
+ * should not free the mailbox resources, if this function returns
+ * MBX_TIMEOUT.
+ * This function will sleep while waiting for mailbox completion.
+ * So, this function should not be called from any context which
+ * does not allow sleeping. Due to the same reason, this function
+ * cannot be called with interrupt disabled.
+ * This function assumes that the mailbox completion occurs while
+ * this function sleep. So, this function cannot be called from
+ * the worker thread which processes mailbox completion.
+ * This function is called in the context of HBA management
+ * applications.
+ * This function returns MBX_SUCCESS when successful.
+ * This function is called with no lock held.
+ **/
+int
+lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq,
+			 uint32_t timeout)
+{
+	struct completion mbox_done;
+	int retval;
+	unsigned long flag;
+
+	pmboxq->mbox_flag &= ~LPFC_MBX_WAKE;
+	/* setup wake call as IOCB callback */
+	pmboxq->mbox_cmpl = lpfc_sli_wake_mbox_wait;
+
+	/* setup context3 field to pass wait_queue pointer to wake function  */
+	init_completion(&mbox_done);
+	pmboxq->context3 = &mbox_done;
+	/* now issue the command */
+	retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
+	if (retval == MBX_BUSY || retval == MBX_SUCCESS) {
+		wait_for_completion_timeout(&mbox_done,
+					    msecs_to_jiffies(timeout * 1000));
+
+		spin_lock_irqsave(&phba->hbalock, flag);
+		pmboxq->context3 = NULL;
+		/*
+		 * if LPFC_MBX_WAKE flag is set the mailbox is completed
+		 * else do not free the resources.
+		 */
+		if (pmboxq->mbox_flag & LPFC_MBX_WAKE) {
+			retval = MBX_SUCCESS;
+		} else {
+			retval = MBX_TIMEOUT;
+			pmboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+		}
+		spin_unlock_irqrestore(&phba->hbalock, flag);
+	}
+	return retval;
+}
+
+/**
+ * lpfc_sli_mbox_sys_shutdown - shutdown mailbox command sub-system
+ * @phba: Pointer to HBA context.
+ * @mbx_action: Mailbox shutdown options.
+ *
+ * This function is called to shutdown the driver's mailbox sub-system.
+ * It first marks the mailbox sub-system is in a block state to prevent
+ * the asynchronous mailbox command from issued off the pending mailbox
+ * command queue. If the mailbox command sub-system shutdown is due to
+ * HBA error conditions such as EEH or ERATT, this routine shall invoke
+ * the mailbox sub-system flush routine to forcefully bring down the
+ * mailbox sub-system. Otherwise, if it is due to normal condition (such
+ * as with offline or HBA function reset), this routine will wait for the
+ * outstanding mailbox command to complete before invoking the mailbox
+ * sub-system flush routine to gracefully bring down mailbox sub-system.
+ **/
+void
+lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba, int mbx_action)
+{
+	struct lpfc_sli *psli = &phba->sli;
+	unsigned long timeout;
+
+	if (mbx_action == LPFC_MBX_NO_WAIT) {
+		/* delay 100ms for port state */
+		msleep(100);
+		lpfc_sli_mbox_sys_flush(phba);
+		return;
+	}
+	timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies;
+
+	/* Disable softirqs, including timers from obtaining phba->hbalock */
+	local_bh_disable();
+
+	spin_lock_irq(&phba->hbalock);
+	psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+
+	if (psli->sli_flag & LPFC_SLI_ACTIVE) {
+		/* Determine how long we might wait for the active mailbox
+		 * command to be gracefully completed by firmware.
+		 */
+		if (phba->sli.mbox_active)
+			timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba,
+						phba->sli.mbox_active) *
+						1000) + jiffies;
+		spin_unlock_irq(&phba->hbalock);
+
+		/* Enable softirqs again, done with phba->hbalock */
+		local_bh_enable();
+
+		while (phba->sli.mbox_active) {
+			/* Check active mailbox complete status every 2ms */
+			msleep(2);
+			if (time_after(jiffies, timeout))
+				/* Timeout, let the mailbox flush routine to
+				 * forcefully release active mailbox command
+				 */
+				break;
+		}
+	} else {
+		spin_unlock_irq(&phba->hbalock);
+
+		/* Enable softirqs again, done with phba->hbalock */
+		local_bh_enable();
+	}
+
+	lpfc_sli_mbox_sys_flush(phba);
+}
+
+/**
+ * lpfc_sli_eratt_read - read sli-3 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI3 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This function returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli_eratt_read(struct lpfc_hba *phba)
+{
+	uint32_t ha_copy;
+
+	/* Read chip Host Attention (HA) register */
+	if (lpfc_readl(phba->HAregaddr, &ha_copy))
+		goto unplug_err;
+
+	if (ha_copy & HA_ERATT) {
+		/* Read host status register to retrieve error event */
+		if (lpfc_sli_read_hs(phba))
+			goto unplug_err;
+
+		/* Check if there is a deferred error condition is active */
+		if ((HS_FFER1 & phba->work_hs) &&
+		    ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+		      HS_FFER6 | HS_FFER7 | HS_FFER8) & phba->work_hs)) {
+			phba->hba_flag |= DEFER_ERATT;
+			/* Clear all interrupt enable conditions */
+			writel(0, phba->HCregaddr);
+			readl(phba->HCregaddr);
+		}
+
+		/* Set the driver HA work bitmap */
+		phba->work_ha |= HA_ERATT;
+		/* Indicate polling handles this ERATT */
+		phba->hba_flag |= HBA_ERATT_HANDLED;
+		return 1;
+	}
+	return 0;
+
+unplug_err:
+	/* Set the driver HS work bitmap */
+	phba->work_hs |= UNPLUG_ERR;
+	/* Set the driver HA work bitmap */
+	phba->work_ha |= HA_ERATT;
+	/* Indicate polling handles this ERATT */
+	phba->hba_flag |= HBA_ERATT_HANDLED;
+	return 1;
+}
+
+/**
+ * lpfc_sli4_eratt_read - read sli-4 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI4 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This function returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli4_eratt_read(struct lpfc_hba *phba)
+{
+	uint32_t uerr_sta_hi, uerr_sta_lo;
+	uint32_t if_type, portsmphr;
+	struct lpfc_register portstat_reg;
+	u32 logmask;
+
+	/*
+	 * For now, use the SLI4 device internal unrecoverable error
+	 * registers for error attention. This can be changed later.
+	 */
+	if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
+	switch (if_type) {
+	case LPFC_SLI_INTF_IF_TYPE_0:
+		if (lpfc_readl(phba->sli4_hba.u.if_type0.UERRLOregaddr,
+			&uerr_sta_lo) ||
+			lpfc_readl(phba->sli4_hba.u.if_type0.UERRHIregaddr,
+			&uerr_sta_hi)) {
+			phba->work_hs |= UNPLUG_ERR;
+			phba->work_ha |= HA_ERATT;
+			phba->hba_flag |= HBA_ERATT_HANDLED;
+			return 1;
+		}
+		if ((~phba->sli4_hba.ue_mask_lo & uerr_sta_lo) ||
+		    (~phba->sli4_hba.ue_mask_hi & uerr_sta_hi)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"1423 HBA Unrecoverable error: "
+					"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+					"ue_mask_lo_reg=0x%x, "
+					"ue_mask_hi_reg=0x%x\n",
+					uerr_sta_lo, uerr_sta_hi,
+					phba->sli4_hba.ue_mask_lo,
+					phba->sli4_hba.ue_mask_hi);
+			phba->work_status[0] = uerr_sta_lo;
+			phba->work_status[1] = uerr_sta_hi;
+			phba->work_ha |= HA_ERATT;
+			phba->hba_flag |= HBA_ERATT_HANDLED;
+			return 1;
+		}
+		break;
+	case LPFC_SLI_INTF_IF_TYPE_2:
+	case LPFC_SLI_INTF_IF_TYPE_6:
+		if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
+			&portstat_reg.word0) ||
+			lpfc_readl(phba->sli4_hba.PSMPHRregaddr,
+			&portsmphr)){
+			phba->work_hs |= UNPLUG_ERR;
+			phba->work_ha |= HA_ERATT;
+			phba->hba_flag |= HBA_ERATT_HANDLED;
+			return 1;
+		}
+		if (bf_get(lpfc_sliport_status_err, &portstat_reg)) {
+			phba->work_status[0] =
+				readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
+			phba->work_status[1] =
+				readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
+			logmask = LOG_TRACE_EVENT;
+			if (phba->work_status[0] ==
+				SLIPORT_ERR1_REG_ERR_CODE_2 &&
+			    phba->work_status[1] == SLIPORT_ERR2_REG_FW_RESTART)
+				logmask = LOG_SLI;
+			lpfc_printf_log(phba, KERN_ERR, logmask,
+					"2885 Port Status Event: "
+					"port status reg 0x%x, "
+					"port smphr reg 0x%x, "
+					"error 1=0x%x, error 2=0x%x\n",
+					portstat_reg.word0,
+					portsmphr,
+					phba->work_status[0],
+					phba->work_status[1]);
+			phba->work_ha |= HA_ERATT;
+			phba->hba_flag |= HBA_ERATT_HANDLED;
+			return 1;
+		}
+		break;
+	case LPFC_SLI_INTF_IF_TYPE_1:
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2886 HBA Error Attention on unsupported "
+				"if type %d.", if_type);
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_check_eratt - check error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called from timer soft interrupt context to check HBA's
+ * error attention register bit for error attention events.
+ *
+ * This function returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+int
+lpfc_sli_check_eratt(struct lpfc_hba *phba)
+{
+	uint32_t ha_copy;
+
+	/* If somebody is waiting to handle an eratt, don't process it
+	 * here. The brdkill function will do this.
+	 */
+	if (phba->link_flag & LS_IGNORE_ERATT)
+		return 0;
+
+	/* Check if interrupt handler handles this ERATT */
+	spin_lock_irq(&phba->hbalock);
+	if (phba->hba_flag & HBA_ERATT_HANDLED) {
+		/* Interrupt handler has handled ERATT */
+		spin_unlock_irq(&phba->hbalock);
+		return 0;
+	}
+
+	/*
+	 * If there is deferred error attention, do not check for error
+	 * attention
+	 */
+	if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+		spin_unlock_irq(&phba->hbalock);
+		return 0;
+	}
+
+	/* If PCI channel is offline, don't process it */
+	if (unlikely(pci_channel_offline(phba->pcidev))) {
+		spin_unlock_irq(&phba->hbalock);
+		return 0;
+	}
+
+	switch (phba->sli_rev) {
+	case LPFC_SLI_REV2:
+	case LPFC_SLI_REV3:
+		/* Read chip Host Attention (HA) register */
+		ha_copy = lpfc_sli_eratt_read(phba);
+		break;
+	case LPFC_SLI_REV4:
+		/* Read device Uncoverable Error (UERR) registers */
+		ha_copy = lpfc_sli4_eratt_read(phba);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0299 Invalid SLI revision (%d)\n",
+				phba->sli_rev);
+		ha_copy = 0;
+		break;
+	}
+	spin_unlock_irq(&phba->hbalock);
+
+	return ha_copy;
+}
+
+/**
+ * lpfc_intr_state_check - Check device state for interrupt handling
+ * @phba: Pointer to HBA context.
+ *
+ * This inline routine checks whether a device or its PCI slot is in a state
+ * that the interrupt should be handled.
+ *
+ * This function returns 0 if the device or the PCI slot is in a state that
+ * interrupt should be handled, otherwise -EIO.
+ */
+static inline int
+lpfc_intr_state_check(struct lpfc_hba *phba)
+{
+	/* If the pci channel is offline, ignore all the interrupts */
+	if (unlikely(pci_channel_offline(phba->pcidev)))
+		return -EIO;
+
+	/* Update device level interrupt statistics */
+	phba->sli.slistat.sli_intr++;
+
+	/* Ignore all interrupts during initialization. */
+	if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+		return -EIO;
+
+	return 0;
+}
+
+/**
+ * lpfc_sli_sp_intr_handler - Slow-path interrupt handler to SLI-3 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when device with SLI-3 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there are slow-path events in
+ * the HBA. However, when the device is enabled with either MSI or Pin-IRQ
+ * interrupt mode, this function is called as part of the device-level
+ * interrupt handler. When the PCI slot is in error recovery or the HBA
+ * is undergoing initialization, the interrupt handler will not process
+ * the interrupt. The link attention and ELS ring attention events are
+ * handled by the worker thread. The interrupt handler signals the worker
+ * thread and returns for these events. This function is called without
+ * any lock held. It gets the hbalock to access and update SLI data
+ * structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli_sp_intr_handler(int irq, void *dev_id)
+{
+	struct lpfc_hba  *phba;
+	uint32_t ha_copy, hc_copy;
+	uint32_t work_ha_copy;
+	unsigned long status;
+	unsigned long iflag;
+	uint32_t control;
+
+	MAILBOX_t *mbox, *pmbox;
+	struct lpfc_vport *vport;
+	struct lpfc_nodelist *ndlp;
+	struct lpfc_dmabuf *mp;
+	LPFC_MBOXQ_t *pmb;
+	int rc;
+
+	/*
+	 * Get the driver's phba structure from the dev_id and
+	 * assume the HBA is not interrupting.
+	 */
+	phba = (struct lpfc_hba *)dev_id;
+
+	if (unlikely(!phba))
+		return IRQ_NONE;
+
+	/*
+	 * Stuff needs to be attented to when this function is invoked as an
+	 * individual interrupt handler in MSI-X multi-message interrupt mode
+	 */
+	if (phba->intr_type == MSIX) {
+		/* Check device state for handling interrupt */
+		if (lpfc_intr_state_check(phba))
+			return IRQ_NONE;
+		/* Need to read HA REG for slow-path events */
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		if (lpfc_readl(phba->HAregaddr, &ha_copy))
+			goto unplug_error;
+		/* If somebody is waiting to handle an eratt don't process it
+		 * here. The brdkill function will do this.
+		 */
+		if (phba->link_flag & LS_IGNORE_ERATT)
+			ha_copy &= ~HA_ERATT;
+		/* Check the need for handling ERATT in interrupt handler */
+		if (ha_copy & HA_ERATT) {
+			if (phba->hba_flag & HBA_ERATT_HANDLED)
+				/* ERATT polling has handled ERATT */
+				ha_copy &= ~HA_ERATT;
+			else
+				/* Indicate interrupt handler handles ERATT */
+				phba->hba_flag |= HBA_ERATT_HANDLED;
+		}
+
+		/*
+		 * If there is deferred error attention, do not check for any
+		 * interrupt.
+		 */
+		if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			return IRQ_NONE;
+		}
+
+		/* Clear up only attention source related to slow-path */
+		if (lpfc_readl(phba->HCregaddr, &hc_copy))
+			goto unplug_error;
+
+		writel(hc_copy & ~(HC_MBINT_ENA | HC_R2INT_ENA |
+			HC_LAINT_ENA | HC_ERINT_ENA),
+			phba->HCregaddr);
+		writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)),
+			phba->HAregaddr);
+		writel(hc_copy, phba->HCregaddr);
+		readl(phba->HAregaddr); /* flush */
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+	} else
+		ha_copy = phba->ha_copy;
+
+	work_ha_copy = ha_copy & phba->work_ha_mask;
+
+	if (work_ha_copy) {
+		if (work_ha_copy & HA_LATT) {
+			if (phba->sli.sli_flag & LPFC_PROCESS_LA) {
+				/*
+				 * Turn off Link Attention interrupts
+				 * until CLEAR_LA done
+				 */
+				spin_lock_irqsave(&phba->hbalock, iflag);
+				phba->sli.sli_flag &= ~LPFC_PROCESS_LA;
+				if (lpfc_readl(phba->HCregaddr, &control))
+					goto unplug_error;
+				control &= ~HC_LAINT_ENA;
+				writel(control, phba->HCregaddr);
+				readl(phba->HCregaddr); /* flush */
+				spin_unlock_irqrestore(&phba->hbalock, iflag);
+			}
+			else
+				work_ha_copy &= ~HA_LATT;
+		}
+
+		if (work_ha_copy & ~(HA_ERATT | HA_MBATT | HA_LATT)) {
+			/*
+			 * Turn off Slow Rings interrupts, LPFC_ELS_RING is
+			 * the only slow ring.
+			 */
+			status = (work_ha_copy &
+				(HA_RXMASK  << (4*LPFC_ELS_RING)));
+			status >>= (4*LPFC_ELS_RING);
+			if (status & HA_RXMASK) {
+				spin_lock_irqsave(&phba->hbalock, iflag);
+				if (lpfc_readl(phba->HCregaddr, &control))
+					goto unplug_error;
+
+				lpfc_debugfs_slow_ring_trc(phba,
+				"ISR slow ring:   ctl:x%x stat:x%x isrcnt:x%x",
+				control, status,
+				(uint32_t)phba->sli.slistat.sli_intr);
+
+				if (control & (HC_R0INT_ENA << LPFC_ELS_RING)) {
+					lpfc_debugfs_slow_ring_trc(phba,
+						"ISR Disable ring:"
+						"pwork:x%x hawork:x%x wait:x%x",
+						phba->work_ha, work_ha_copy,
+						(uint32_t)((unsigned long)
+						&phba->work_waitq));
+
+					control &=
+					    ~(HC_R0INT_ENA << LPFC_ELS_RING);
+					writel(control, phba->HCregaddr);
+					readl(phba->HCregaddr); /* flush */
+				}
+				else {
+					lpfc_debugfs_slow_ring_trc(phba,
+						"ISR slow ring:   pwork:"
+						"x%x hawork:x%x wait:x%x",
+						phba->work_ha, work_ha_copy,
+						(uint32_t)((unsigned long)
+						&phba->work_waitq));
+				}
+				spin_unlock_irqrestore(&phba->hbalock, iflag);
+			}
+		}
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		if (work_ha_copy & HA_ERATT) {
+			if (lpfc_sli_read_hs(phba))
+				goto unplug_error;
+			/*
+			 * Check if there is a deferred error condition
+			 * is active
+			 */
+			if ((HS_FFER1 & phba->work_hs) &&
+				((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+				  HS_FFER6 | HS_FFER7 | HS_FFER8) &
+				  phba->work_hs)) {
+				phba->hba_flag |= DEFER_ERATT;
+				/* Clear all interrupt enable conditions */
+				writel(0, phba->HCregaddr);
+				readl(phba->HCregaddr);
+			}
+		}
+
+		if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) {
+			pmb = phba->sli.mbox_active;
+			pmbox = &pmb->u.mb;
+			mbox = phba->mbox;
+			vport = pmb->vport;
+
+			/* First check out the status word */
+			lpfc_sli_pcimem_bcopy(mbox, pmbox, sizeof(uint32_t));
+			if (pmbox->mbxOwner != OWN_HOST) {
+				spin_unlock_irqrestore(&phba->hbalock, iflag);
+				/*
+				 * Stray Mailbox Interrupt, mbxCommand <cmd>
+				 * mbxStatus <status>
+				 */
+				lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+						"(%d):0304 Stray Mailbox "
+						"Interrupt mbxCommand x%x "
+						"mbxStatus x%x\n",
+						(vport ? vport->vpi : 0),
+						pmbox->mbxCommand,
+						pmbox->mbxStatus);
+				/* clear mailbox attention bit */
+				work_ha_copy &= ~HA_MBATT;
+			} else {
+				phba->sli.mbox_active = NULL;
+				spin_unlock_irqrestore(&phba->hbalock, iflag);
+				phba->last_completion_time = jiffies;
+				del_timer(&phba->sli.mbox_tmo);
+				if (pmb->mbox_cmpl) {
+					lpfc_sli_pcimem_bcopy(mbox, pmbox,
+							MAILBOX_CMD_SIZE);
+					if (pmb->out_ext_byte_len &&
+						pmb->ctx_buf)
+						lpfc_sli_pcimem_bcopy(
+						phba->mbox_ext,
+						pmb->ctx_buf,
+						pmb->out_ext_byte_len);
+				}
+				if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) {
+					pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG;
+
+					lpfc_debugfs_disc_trc(vport,
+						LPFC_DISC_TRC_MBOX_VPORT,
+						"MBOX dflt rpi: : "
+						"status:x%x rpi:x%x",
+						(uint32_t)pmbox->mbxStatus,
+						pmbox->un.varWords[0], 0);
+
+					if (!pmbox->mbxStatus) {
+						mp = (struct lpfc_dmabuf *)
+							(pmb->ctx_buf);
+						ndlp = (struct lpfc_nodelist *)
+							pmb->ctx_ndlp;
+
+						/* Reg_LOGIN of dflt RPI was
+						 * successful. new lets get
+						 * rid of the RPI using the
+						 * same mbox buffer.
+						 */
+						lpfc_unreg_login(phba,
+							vport->vpi,
+							pmbox->un.varWords[0],
+							pmb);
+						pmb->mbox_cmpl =
+							lpfc_mbx_cmpl_dflt_rpi;
+						pmb->ctx_buf = mp;
+						pmb->ctx_ndlp = ndlp;
+						pmb->vport = vport;
+						rc = lpfc_sli_issue_mbox(phba,
+								pmb,
+								MBX_NOWAIT);
+						if (rc != MBX_BUSY)
+							lpfc_printf_log(phba,
+							KERN_ERR,
+							LOG_TRACE_EVENT,
+							"0350 rc should have"
+							"been MBX_BUSY\n");
+						if (rc != MBX_NOT_FINISHED)
+							goto send_current_mbox;
+					}
+				}
+				spin_lock_irqsave(
+						&phba->pport->work_port_lock,
+						iflag);
+				phba->pport->work_port_events &=
+					~WORKER_MBOX_TMO;
+				spin_unlock_irqrestore(
+						&phba->pport->work_port_lock,
+						iflag);
+
+				/* Do NOT queue MBX_HEARTBEAT to the worker
+				 * thread for processing.
+				 */
+				if (pmbox->mbxCommand == MBX_HEARTBEAT) {
+					/* Process mbox now */
+					phba->sli.mbox_active = NULL;
+					phba->sli.sli_flag &=
+						~LPFC_SLI_MBOX_ACTIVE;
+					if (pmb->mbox_cmpl)
+						pmb->mbox_cmpl(phba, pmb);
+				} else {
+					/* Queue to worker thread to process */
+					lpfc_mbox_cmpl_put(phba, pmb);
+				}
+			}
+		} else
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+		if ((work_ha_copy & HA_MBATT) &&
+		    (phba->sli.mbox_active == NULL)) {
+send_current_mbox:
+			/* Process next mailbox command if there is one */
+			do {
+				rc = lpfc_sli_issue_mbox(phba, NULL,
+							 MBX_NOWAIT);
+			} while (rc == MBX_NOT_FINISHED);
+			if (rc != MBX_SUCCESS)
+				lpfc_printf_log(phba, KERN_ERR,
+						LOG_TRACE_EVENT,
+						"0349 rc should be "
+						"MBX_SUCCESS\n");
+		}
+
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		phba->work_ha |= work_ha_copy;
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		lpfc_worker_wake_up(phba);
+	}
+	return IRQ_HANDLED;
+unplug_error:
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return IRQ_HANDLED;
+
+} /* lpfc_sli_sp_intr_handler */
+
+/**
+ * lpfc_sli_fp_intr_handler - Fast-path interrupt handler to SLI-3 device.
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when device with SLI-3 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there is a fast-path FCP IOCB
+ * ring event in the HBA. However, when the device is enabled with either
+ * MSI or Pin-IRQ interrupt mode, this function is called as part of the
+ * device-level interrupt handler. When the PCI slot is in error recovery
+ * or the HBA is undergoing initialization, the interrupt handler will not
+ * process the interrupt. The SCSI FCP fast-path ring event are handled in
+ * the intrrupt context. This function is called without any lock held.
+ * It gets the hbalock to access and update SLI data structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli_fp_intr_handler(int irq, void *dev_id)
+{
+	struct lpfc_hba  *phba;
+	uint32_t ha_copy;
+	unsigned long status;
+	unsigned long iflag;
+	struct lpfc_sli_ring *pring;
+
+	/* Get the driver's phba structure from the dev_id and
+	 * assume the HBA is not interrupting.
+	 */
+	phba = (struct lpfc_hba *) dev_id;
+
+	if (unlikely(!phba))
+		return IRQ_NONE;
+
+	/*
+	 * Stuff needs to be attented to when this function is invoked as an
+	 * individual interrupt handler in MSI-X multi-message interrupt mode
+	 */
+	if (phba->intr_type == MSIX) {
+		/* Check device state for handling interrupt */
+		if (lpfc_intr_state_check(phba))
+			return IRQ_NONE;
+		/* Need to read HA REG for FCP ring and other ring events */
+		if (lpfc_readl(phba->HAregaddr, &ha_copy))
+			return IRQ_HANDLED;
+		/* Clear up only attention source related to fast-path */
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		/*
+		 * If there is deferred error attention, do not check for
+		 * any interrupt.
+		 */
+		if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			return IRQ_NONE;
+		}
+		writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)),
+			phba->HAregaddr);
+		readl(phba->HAregaddr); /* flush */
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+	} else
+		ha_copy = phba->ha_copy;
+
+	/*
+	 * Process all events on FCP ring. Take the optimized path for FCP IO.
+	 */
+	ha_copy &= ~(phba->work_ha_mask);
+
+	status = (ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING)));
+	status >>= (4*LPFC_FCP_RING);
+	pring = &phba->sli.sli3_ring[LPFC_FCP_RING];
+	if (status & HA_RXMASK)
+		lpfc_sli_handle_fast_ring_event(phba, pring, status);
+
+	if (phba->cfg_multi_ring_support == 2) {
+		/*
+		 * Process all events on extra ring. Take the optimized path
+		 * for extra ring IO.
+		 */
+		status = (ha_copy & (HA_RXMASK << (4*LPFC_EXTRA_RING)));
+		status >>= (4*LPFC_EXTRA_RING);
+		if (status & HA_RXMASK) {
+			lpfc_sli_handle_fast_ring_event(phba,
+					&phba->sli.sli3_ring[LPFC_EXTRA_RING],
+					status);
+		}
+	}
+	return IRQ_HANDLED;
+}  /* lpfc_sli_fp_intr_handler */
+
+/**
+ * lpfc_sli_intr_handler - Device-level interrupt handler to SLI-3 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is the HBA device-level interrupt handler to device with
+ * SLI-3 interface spec, called from the PCI layer when either MSI or
+ * Pin-IRQ interrupt mode is enabled and there is an event in the HBA which
+ * requires driver attention. This function invokes the slow-path interrupt
+ * attention handling function and fast-path interrupt attention handling
+ * function in turn to process the relevant HBA attention events. This
+ * function is called without any lock held. It gets the hbalock to access
+ * and update SLI data structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled, else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli_intr_handler(int irq, void *dev_id)
+{
+	struct lpfc_hba  *phba;
+	irqreturn_t sp_irq_rc, fp_irq_rc;
+	unsigned long status1, status2;
+	uint32_t hc_copy;
+
+	/*
+	 * Get the driver's phba structure from the dev_id and
+	 * assume the HBA is not interrupting.
+	 */
+	phba = (struct lpfc_hba *) dev_id;
+
+	if (unlikely(!phba))
+		return IRQ_NONE;
+
+	/* Check device state for handling interrupt */
+	if (lpfc_intr_state_check(phba))
+		return IRQ_NONE;
+
+	spin_lock(&phba->hbalock);
+	if (lpfc_readl(phba->HAregaddr, &phba->ha_copy)) {
+		spin_unlock(&phba->hbalock);
+		return IRQ_HANDLED;
+	}
+
+	if (unlikely(!phba->ha_copy)) {
+		spin_unlock(&phba->hbalock);
+		return IRQ_NONE;
+	} else if (phba->ha_copy & HA_ERATT) {
+		if (phba->hba_flag & HBA_ERATT_HANDLED)
+			/* ERATT polling has handled ERATT */
+			phba->ha_copy &= ~HA_ERATT;
+		else
+			/* Indicate interrupt handler handles ERATT */
+			phba->hba_flag |= HBA_ERATT_HANDLED;
+	}
+
+	/*
+	 * If there is deferred error attention, do not check for any interrupt.
+	 */
+	if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+		spin_unlock(&phba->hbalock);
+		return IRQ_NONE;
+	}
+
+	/* Clear attention sources except link and error attentions */
+	if (lpfc_readl(phba->HCregaddr, &hc_copy)) {
+		spin_unlock(&phba->hbalock);
+		return IRQ_HANDLED;
+	}
+	writel(hc_copy & ~(HC_MBINT_ENA | HC_R0INT_ENA | HC_R1INT_ENA
+		| HC_R2INT_ENA | HC_LAINT_ENA | HC_ERINT_ENA),
+		phba->HCregaddr);
+	writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
+	writel(hc_copy, phba->HCregaddr);
+	readl(phba->HAregaddr); /* flush */
+	spin_unlock(&phba->hbalock);
+
+	/*
+	 * Invokes slow-path host attention interrupt handling as appropriate.
+	 */
+
+	/* status of events with mailbox and link attention */
+	status1 = phba->ha_copy & (HA_MBATT | HA_LATT | HA_ERATT);
+
+	/* status of events with ELS ring */
+	status2 = (phba->ha_copy & (HA_RXMASK  << (4*LPFC_ELS_RING)));
+	status2 >>= (4*LPFC_ELS_RING);
+
+	if (status1 || (status2 & HA_RXMASK))
+		sp_irq_rc = lpfc_sli_sp_intr_handler(irq, dev_id);
+	else
+		sp_irq_rc = IRQ_NONE;
+
+	/*
+	 * Invoke fast-path host attention interrupt handling as appropriate.
+	 */
+
+	/* status of events with FCP ring */
+	status1 = (phba->ha_copy & (HA_RXMASK << (4*LPFC_FCP_RING)));
+	status1 >>= (4*LPFC_FCP_RING);
+
+	/* status of events with extra ring */
+	if (phba->cfg_multi_ring_support == 2) {
+		status2 = (phba->ha_copy & (HA_RXMASK << (4*LPFC_EXTRA_RING)));
+		status2 >>= (4*LPFC_EXTRA_RING);
+	} else
+		status2 = 0;
+
+	if ((status1 & HA_RXMASK) || (status2 & HA_RXMASK))
+		fp_irq_rc = lpfc_sli_fp_intr_handler(irq, dev_id);
+	else
+		fp_irq_rc = IRQ_NONE;
+
+	/* Return device-level interrupt handling status */
+	return (sp_irq_rc == IRQ_HANDLED) ? sp_irq_rc : fp_irq_rc;
+}  /* lpfc_sli_intr_handler */
+
+/**
+ * lpfc_sli4_els_xri_abort_event_proc - Process els xri abort event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 els abort xri events.
+ **/
+void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *phba)
+{
+	struct lpfc_cq_event *cq_event;
+	unsigned long iflags;
+
+	/* First, declare the els xri abort event has been handled */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	phba->hba_flag &= ~ELS_XRI_ABORT_EVENT;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	/* Now, handle all the els xri abort events */
+	spin_lock_irqsave(&phba->sli4_hba.els_xri_abrt_list_lock, iflags);
+	while (!list_empty(&phba->sli4_hba.sp_els_xri_aborted_work_queue)) {
+		/* Get the first event from the head of the event queue */
+		list_remove_head(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
+				 cq_event, struct lpfc_cq_event, list);
+		spin_unlock_irqrestore(&phba->sli4_hba.els_xri_abrt_list_lock,
+				       iflags);
+		/* Notify aborted XRI for ELS work queue */
+		lpfc_sli4_els_xri_aborted(phba, &cq_event->cqe.wcqe_axri);
+
+		/* Free the event processed back to the free pool */
+		lpfc_sli4_cq_event_release(phba, cq_event);
+		spin_lock_irqsave(&phba->sli4_hba.els_xri_abrt_list_lock,
+				  iflags);
+	}
+	spin_unlock_irqrestore(&phba->sli4_hba.els_xri_abrt_list_lock, iflags);
+}
+
+/**
+ * lpfc_sli4_els_preprocess_rspiocbq - Get response iocbq from els wcqe
+ * @phba: Pointer to HBA context object.
+ * @irspiocbq: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an ELS work-queue completion event and construct
+ * a pseudo response ELS IOCBQ from the SLI4 ELS WCQE for the common
+ * discovery engine to handle.
+ *
+ * Return: Pointer to the receive IOCBQ, NULL otherwise.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli4_els_preprocess_rspiocbq(struct lpfc_hba *phba,
+				  struct lpfc_iocbq *irspiocbq)
+{
+	struct lpfc_sli_ring *pring;
+	struct lpfc_iocbq *cmdiocbq;
+	struct lpfc_wcqe_complete *wcqe;
+	unsigned long iflags;
+
+	pring = lpfc_phba_elsring(phba);
+	if (unlikely(!pring))
+		return NULL;
+
+	wcqe = &irspiocbq->cq_event.cqe.wcqe_cmpl;
+	spin_lock_irqsave(&pring->ring_lock, iflags);
+	pring->stats.iocb_event++;
+	/* Look up the ELS command IOCB and create pseudo response IOCB */
+	cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+	if (unlikely(!cmdiocbq)) {
+		spin_unlock_irqrestore(&pring->ring_lock, iflags);
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0386 ELS complete with no corresponding "
+				"cmdiocb: 0x%x 0x%x 0x%x 0x%x\n",
+				wcqe->word0, wcqe->total_data_placed,
+				wcqe->parameter, wcqe->word3);
+		lpfc_sli_release_iocbq(phba, irspiocbq);
+		return NULL;
+	}
+
+	memcpy(&irspiocbq->wqe, &cmdiocbq->wqe, sizeof(union lpfc_wqe128));
+	memcpy(&irspiocbq->wcqe_cmpl, wcqe, sizeof(*wcqe));
+
+	/* Put the iocb back on the txcmplq */
+	lpfc_sli_ringtxcmpl_put(phba, pring, cmdiocbq);
+	spin_unlock_irqrestore(&pring->ring_lock, iflags);
+
+	if (bf_get(lpfc_wcqe_c_xb, wcqe)) {
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		irspiocbq->cmd_flag |= LPFC_EXCHANGE_BUSY;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+	}
+
+	return irspiocbq;
+}
+
+inline struct lpfc_cq_event *
+lpfc_cq_event_setup(struct lpfc_hba *phba, void *entry, int size)
+{
+	struct lpfc_cq_event *cq_event;
+
+	/* Allocate a new internal CQ_EVENT entry */
+	cq_event = lpfc_sli4_cq_event_alloc(phba);
+	if (!cq_event) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0602 Failed to alloc CQ_EVENT entry\n");
+		return NULL;
+	}
+
+	/* Move the CQE into the event */
+	memcpy(&cq_event->cqe, entry, size);
+	return cq_event;
+}
+
+/**
+ * lpfc_sli4_sp_handle_async_event - Handle an asynchronous event
+ * @phba: Pointer to HBA context object.
+ * @mcqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry with asynchronous
+ * event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_async_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe)
+{
+	struct lpfc_cq_event *cq_event;
+	unsigned long iflags;
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"0392 Async Event: word0:x%x, word1:x%x, "
+			"word2:x%x, word3:x%x\n", mcqe->word0,
+			mcqe->mcqe_tag0, mcqe->mcqe_tag1, mcqe->trailer);
+
+	cq_event = lpfc_cq_event_setup(phba, mcqe, sizeof(struct lpfc_mcqe));
+	if (!cq_event)
+		return false;
+
+	spin_lock_irqsave(&phba->sli4_hba.asynce_list_lock, iflags);
+	list_add_tail(&cq_event->list, &phba->sli4_hba.sp_asynce_work_queue);
+	spin_unlock_irqrestore(&phba->sli4_hba.asynce_list_lock, iflags);
+
+	/* Set the async event flag */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	phba->hba_flag |= ASYNC_EVENT;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	return true;
+}
+
+/**
+ * lpfc_sli4_sp_handle_mbox_event - Handle a mailbox completion event
+ * @phba: Pointer to HBA context object.
+ * @mcqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry with mailbox
+ * completion event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_mbox_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe)
+{
+	uint32_t mcqe_status;
+	MAILBOX_t *mbox, *pmbox;
+	struct lpfc_mqe *mqe;
+	struct lpfc_vport *vport;
+	struct lpfc_nodelist *ndlp;
+	struct lpfc_dmabuf *mp;
+	unsigned long iflags;
+	LPFC_MBOXQ_t *pmb;
+	bool workposted = false;
+	int rc;
+
+	/* If not a mailbox complete MCQE, out by checking mailbox consume */
+	if (!bf_get(lpfc_trailer_completed, mcqe))
+		goto out_no_mqe_complete;
+
+	/* Get the reference to the active mbox command */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	pmb = phba->sli.mbox_active;
+	if (unlikely(!pmb)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"1832 No pending MBOX command to handle\n");
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		goto out_no_mqe_complete;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	mqe = &pmb->u.mqe;
+	pmbox = (MAILBOX_t *)&pmb->u.mqe;
+	mbox = phba->mbox;
+	vport = pmb->vport;
+
+	/* Reset heartbeat timer */
+	phba->last_completion_time = jiffies;
+	del_timer(&phba->sli.mbox_tmo);
+
+	/* Move mbox data to caller's mailbox region, do endian swapping */
+	if (pmb->mbox_cmpl && mbox)
+		lpfc_sli4_pcimem_bcopy(mbox, mqe, sizeof(struct lpfc_mqe));
+
+	/*
+	 * For mcqe errors, conditionally move a modified error code to
+	 * the mbox so that the error will not be missed.
+	 */
+	mcqe_status = bf_get(lpfc_mcqe_status, mcqe);
+	if (mcqe_status != MB_CQE_STATUS_SUCCESS) {
+		if (bf_get(lpfc_mqe_status, mqe) == MBX_SUCCESS)
+			bf_set(lpfc_mqe_status, mqe,
+			       (LPFC_MBX_ERROR_RANGE | mcqe_status));
+	}
+	if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) {
+		pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG;
+		lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_MBOX_VPORT,
+				      "MBOX dflt rpi: status:x%x rpi:x%x",
+				      mcqe_status,
+				      pmbox->un.varWords[0], 0);
+		if (mcqe_status == MB_CQE_STATUS_SUCCESS) {
+			mp = (struct lpfc_dmabuf *)(pmb->ctx_buf);
+			ndlp = (struct lpfc_nodelist *)pmb->ctx_ndlp;
+
+			/* Reg_LOGIN of dflt RPI was successful. Mark the
+			 * node as having an UNREG_LOGIN in progress to stop
+			 * an unsolicited PLOGI from the same NPortId from
+			 * starting another mailbox transaction.
+			 */
+			spin_lock_irqsave(&ndlp->lock, iflags);
+			ndlp->nlp_flag |= NLP_UNREG_INP;
+			spin_unlock_irqrestore(&ndlp->lock, iflags);
+			lpfc_unreg_login(phba, vport->vpi,
+					 pmbox->un.varWords[0], pmb);
+			pmb->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi;
+			pmb->ctx_buf = mp;
+
+			/* No reference taken here.  This is a default
+			 * RPI reg/immediate unreg cycle. The reference was
+			 * taken in the reg rpi path and is released when
+			 * this mailbox completes.
+			 */
+			pmb->ctx_ndlp = ndlp;
+			pmb->vport = vport;
+			rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+			if (rc != MBX_BUSY)
+				lpfc_printf_log(phba, KERN_ERR,
+						LOG_TRACE_EVENT,
+						"0385 rc should "
+						"have been MBX_BUSY\n");
+			if (rc != MBX_NOT_FINISHED)
+				goto send_current_mbox;
+		}
+	}
+	spin_lock_irqsave(&phba->pport->work_port_lock, iflags);
+	phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
+	spin_unlock_irqrestore(&phba->pport->work_port_lock, iflags);
+
+	/* Do NOT queue MBX_HEARTBEAT to the worker thread for processing. */
+	if (pmbox->mbxCommand == MBX_HEARTBEAT) {
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		/* Release the mailbox command posting token */
+		phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+		phba->sli.mbox_active = NULL;
+		if (bf_get(lpfc_trailer_consumed, mcqe))
+			lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+		/* Post the next mbox command, if there is one */
+		lpfc_sli4_post_async_mbox(phba);
+
+		/* Process cmpl now */
+		if (pmb->mbox_cmpl)
+			pmb->mbox_cmpl(phba, pmb);
+		return false;
+	}
+
+	/* There is mailbox completion work to queue to the worker thread */
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	__lpfc_mbox_cmpl_put(phba, pmb);
+	phba->work_ha |= HA_MBATT;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	workposted = true;
+
+send_current_mbox:
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	/* Release the mailbox command posting token */
+	phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+	/* Setting active mailbox pointer need to be in sync to flag clear */
+	phba->sli.mbox_active = NULL;
+	if (bf_get(lpfc_trailer_consumed, mcqe))
+		lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	/* Wake up worker thread to post the next pending mailbox command */
+	lpfc_worker_wake_up(phba);
+	return workposted;
+
+out_no_mqe_complete:
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	if (bf_get(lpfc_trailer_consumed, mcqe))
+		lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return false;
+}
+
+/**
+ * lpfc_sli4_sp_handle_mcqe - Process a mailbox completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to associated CQ
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry, it invokes the
+ * proper mailbox complete handling or asynchronous event handling routine
+ * according to the MCQE's async bit.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_mcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			 struct lpfc_cqe *cqe)
+{
+	struct lpfc_mcqe mcqe;
+	bool workposted;
+
+	cq->CQ_mbox++;
+
+	/* Copy the mailbox MCQE and convert endian order as needed */
+	lpfc_sli4_pcimem_bcopy(cqe, &mcqe, sizeof(struct lpfc_mcqe));
+
+	/* Invoke the proper event handling routine */
+	if (!bf_get(lpfc_trailer_async, &mcqe))
+		workposted = lpfc_sli4_sp_handle_mbox_event(phba, &mcqe);
+	else
+		workposted = lpfc_sli4_sp_handle_async_event(phba, &mcqe);
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_els_wcqe - Handle els work-queue completion event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to associated CQ
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an ELS work-queue completion event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_els_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			     struct lpfc_wcqe_complete *wcqe)
+{
+	struct lpfc_iocbq *irspiocbq;
+	unsigned long iflags;
+	struct lpfc_sli_ring *pring = cq->pring;
+	int txq_cnt = 0;
+	int txcmplq_cnt = 0;
+
+	/* Check for response status */
+	if (unlikely(bf_get(lpfc_wcqe_c_status, wcqe))) {
+		/* Log the error status */
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"0357 ELS CQE error: status=x%x: "
+				"CQE: %08x %08x %08x %08x\n",
+				bf_get(lpfc_wcqe_c_status, wcqe),
+				wcqe->word0, wcqe->total_data_placed,
+				wcqe->parameter, wcqe->word3);
+	}
+
+	/* Get an irspiocbq for later ELS response processing use */
+	irspiocbq = lpfc_sli_get_iocbq(phba);
+	if (!irspiocbq) {
+		if (!list_empty(&pring->txq))
+			txq_cnt++;
+		if (!list_empty(&pring->txcmplq))
+			txcmplq_cnt++;
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"0387 NO IOCBQ data: txq_cnt=%d iocb_cnt=%d "
+			"els_txcmplq_cnt=%d\n",
+			txq_cnt, phba->iocb_cnt,
+			txcmplq_cnt);
+		return false;
+	}
+
+	/* Save off the slow-path queue event for work thread to process */
+	memcpy(&irspiocbq->cq_event.cqe.wcqe_cmpl, wcqe, sizeof(*wcqe));
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	list_add_tail(&irspiocbq->cq_event.list,
+		      &phba->sli4_hba.sp_queue_event);
+	phba->hba_flag |= HBA_SP_QUEUE_EVT;
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	return true;
+}
+
+/**
+ * lpfc_sli4_sp_handle_rel_wcqe - Handle slow-path WQ entry consumed event
+ * @phba: Pointer to HBA context object.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles slow-path WQ entry consumed event by invoking the
+ * proper WQ release routine to the slow-path WQ.
+ **/
+static void
+lpfc_sli4_sp_handle_rel_wcqe(struct lpfc_hba *phba,
+			     struct lpfc_wcqe_release *wcqe)
+{
+	/* sanity check on queue memory */
+	if (unlikely(!phba->sli4_hba.els_wq))
+		return;
+	/* Check for the slow-path ELS work queue */
+	if (bf_get(lpfc_wcqe_r_wq_id, wcqe) == phba->sli4_hba.els_wq->queue_id)
+		lpfc_sli4_wq_release(phba->sli4_hba.els_wq,
+				     bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+	else
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"2579 Slow-path wqe consume event carries "
+				"miss-matched qid: wcqe-qid=x%x, sp-qid=x%x\n",
+				bf_get(lpfc_wcqe_r_wqe_index, wcqe),
+				phba->sli4_hba.els_wq->queue_id);
+}
+
+/**
+ * lpfc_sli4_sp_handle_abort_xri_wcqe - Handle a xri abort event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to a WQ completion queue.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an XRI abort event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_abort_xri_wcqe(struct lpfc_hba *phba,
+				   struct lpfc_queue *cq,
+				   struct sli4_wcqe_xri_aborted *wcqe)
+{
+	bool workposted = false;
+	struct lpfc_cq_event *cq_event;
+	unsigned long iflags;
+
+	switch (cq->subtype) {
+	case LPFC_IO:
+		lpfc_sli4_io_xri_aborted(phba, wcqe, cq->hdwq);
+		if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) {
+			/* Notify aborted XRI for NVME work queue */
+			if (phba->nvmet_support)
+				lpfc_sli4_nvmet_xri_aborted(phba, wcqe);
+		}
+		workposted = false;
+		break;
+	case LPFC_NVME_LS: /* NVME LS uses ELS resources */
+	case LPFC_ELS:
+		cq_event = lpfc_cq_event_setup(phba, wcqe, sizeof(*wcqe));
+		if (!cq_event) {
+			workposted = false;
+			break;
+		}
+		cq_event->hdwq = cq->hdwq;
+		spin_lock_irqsave(&phba->sli4_hba.els_xri_abrt_list_lock,
+				  iflags);
+		list_add_tail(&cq_event->list,
+			      &phba->sli4_hba.sp_els_xri_aborted_work_queue);
+		/* Set the els xri abort event flag */
+		phba->hba_flag |= ELS_XRI_ABORT_EVENT;
+		spin_unlock_irqrestore(&phba->sli4_hba.els_xri_abrt_list_lock,
+				       iflags);
+		workposted = true;
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0603 Invalid CQ subtype %d: "
+				"%08x %08x %08x %08x\n",
+				cq->subtype, wcqe->word0, wcqe->parameter,
+				wcqe->word2, wcqe->word3);
+		workposted = false;
+		break;
+	}
+	return workposted;
+}
+
+#define FC_RCTL_MDS_DIAGS	0xF4
+
+/**
+ * lpfc_sli4_sp_handle_rcqe - Process a receive-queue completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @rcqe: Pointer to receive-queue completion queue entry.
+ *
+ * This routine process a receive-queue completion queue entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_rcqe(struct lpfc_hba *phba, struct lpfc_rcqe *rcqe)
+{
+	bool workposted = false;
+	struct fc_frame_header *fc_hdr;
+	struct lpfc_queue *hrq = phba->sli4_hba.hdr_rq;
+	struct lpfc_queue *drq = phba->sli4_hba.dat_rq;
+	struct lpfc_nvmet_tgtport *tgtp;
+	struct hbq_dmabuf *dma_buf;
+	uint32_t status, rq_id;
+	unsigned long iflags;
+
+	/* sanity check on queue memory */
+	if (unlikely(!hrq) || unlikely(!drq))
+		return workposted;
+
+	if (bf_get(lpfc_cqe_code, rcqe) == CQE_CODE_RECEIVE_V1)
+		rq_id = bf_get(lpfc_rcqe_rq_id_v1, rcqe);
+	else
+		rq_id = bf_get(lpfc_rcqe_rq_id, rcqe);
+	if (rq_id != hrq->queue_id)
+		goto out;
+
+	status = bf_get(lpfc_rcqe_status, rcqe);
+	switch (status) {
+	case FC_STATUS_RQ_BUF_LEN_EXCEEDED:
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2537 Receive Frame Truncated!!\n");
+		fallthrough;
+	case FC_STATUS_RQ_SUCCESS:
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		lpfc_sli4_rq_release(hrq, drq);
+		dma_buf = lpfc_sli_hbqbuf_get(&phba->hbqs[0].hbq_buffer_list);
+		if (!dma_buf) {
+			hrq->RQ_no_buf_found++;
+			spin_unlock_irqrestore(&phba->hbalock, iflags);
+			goto out;
+		}
+		hrq->RQ_rcv_buf++;
+		hrq->RQ_buf_posted--;
+		memcpy(&dma_buf->cq_event.cqe.rcqe_cmpl, rcqe, sizeof(*rcqe));
+
+		fc_hdr = (struct fc_frame_header *)dma_buf->hbuf.virt;
+
+		if (fc_hdr->fh_r_ctl == FC_RCTL_MDS_DIAGS ||
+		    fc_hdr->fh_r_ctl == FC_RCTL_DD_UNSOL_DATA) {
+			spin_unlock_irqrestore(&phba->hbalock, iflags);
+			/* Handle MDS Loopback frames */
+			if  (!(phba->pport->load_flag & FC_UNLOADING))
+				lpfc_sli4_handle_mds_loopback(phba->pport,
+							      dma_buf);
+			else
+				lpfc_in_buf_free(phba, &dma_buf->dbuf);
+			break;
+		}
+
+		/* save off the frame for the work thread to process */
+		list_add_tail(&dma_buf->cq_event.list,
+			      &phba->sli4_hba.sp_queue_event);
+		/* Frame received */
+		phba->hba_flag |= HBA_SP_QUEUE_EVT;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		workposted = true;
+		break;
+	case FC_STATUS_INSUFF_BUF_FRM_DISC:
+		if (phba->nvmet_support) {
+			tgtp = phba->targetport->private;
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"6402 RQE Error x%x, posted %d err_cnt "
+					"%d: %x %x %x\n",
+					status, hrq->RQ_buf_posted,
+					hrq->RQ_no_posted_buf,
+					atomic_read(&tgtp->rcv_fcp_cmd_in),
+					atomic_read(&tgtp->rcv_fcp_cmd_out),
+					atomic_read(&tgtp->xmt_fcp_release));
+		}
+		fallthrough;
+
+	case FC_STATUS_INSUFF_BUF_NEED_BUF:
+		hrq->RQ_no_posted_buf++;
+		/* Post more buffers if possible */
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		phba->hba_flag |= HBA_POST_RECEIVE_BUFFER;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		workposted = true;
+		break;
+	}
+out:
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_cqe - Process a slow path completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to the completion queue.
+ * @cqe: Pointer to a completion queue entry.
+ *
+ * This routine process a slow-path work-queue or receive queue completion queue
+ * entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_cqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			 struct lpfc_cqe *cqe)
+{
+	struct lpfc_cqe cqevt;
+	bool workposted = false;
+
+	/* Copy the work queue CQE and convert endian order if needed */
+	lpfc_sli4_pcimem_bcopy(cqe, &cqevt, sizeof(struct lpfc_cqe));
+
+	/* Check and process for different type of WCQE and dispatch */
+	switch (bf_get(lpfc_cqe_code, &cqevt)) {
+	case CQE_CODE_COMPL_WQE:
+		/* Process the WQ/RQ complete event */
+		phba->last_completion_time = jiffies;
+		workposted = lpfc_sli4_sp_handle_els_wcqe(phba, cq,
+				(struct lpfc_wcqe_complete *)&cqevt);
+		break;
+	case CQE_CODE_RELEASE_WQE:
+		/* Process the WQ release event */
+		lpfc_sli4_sp_handle_rel_wcqe(phba,
+				(struct lpfc_wcqe_release *)&cqevt);
+		break;
+	case CQE_CODE_XRI_ABORTED:
+		/* Process the WQ XRI abort event */
+		phba->last_completion_time = jiffies;
+		workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+				(struct sli4_wcqe_xri_aborted *)&cqevt);
+		break;
+	case CQE_CODE_RECEIVE:
+	case CQE_CODE_RECEIVE_V1:
+		/* Process the RQ event */
+		phba->last_completion_time = jiffies;
+		workposted = lpfc_sli4_sp_handle_rcqe(phba,
+				(struct lpfc_rcqe *)&cqevt);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0388 Not a valid WCQE code: x%x\n",
+				bf_get(lpfc_cqe_code, &cqevt));
+		break;
+	}
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_eqe - Process a slow-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eqe: Pointer to fast-path event queue entry.
+ * @speq: Pointer to slow-path event queue.
+ *
+ * This routine process a event queue entry from the slow-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on that completion queue, rearm the
+ * completion queue, and then return.
+ *
+ **/
+static void
+lpfc_sli4_sp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe,
+	struct lpfc_queue *speq)
+{
+	struct lpfc_queue *cq = NULL, *childq;
+	uint16_t cqid;
+	int ret = 0;
+
+	/* Get the reference to the corresponding CQ */
+	cqid = bf_get_le32(lpfc_eqe_resource_id, eqe);
+
+	list_for_each_entry(childq, &speq->child_list, list) {
+		if (childq->queue_id == cqid) {
+			cq = childq;
+			break;
+		}
+	}
+	if (unlikely(!cq)) {
+		if (phba->sli.sli_flag & LPFC_SLI_ACTIVE)
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"0365 Slow-path CQ identifier "
+					"(%d) does not exist\n", cqid);
+		return;
+	}
+
+	/* Save EQ associated with this CQ */
+	cq->assoc_qp = speq;
+
+	if (is_kdump_kernel())
+		ret = queue_work(phba->wq, &cq->spwork);
+	else
+		ret = queue_work_on(cq->chann, phba->wq, &cq->spwork);
+
+	if (!ret)
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0390 Cannot schedule queue work "
+				"for CQ eqcqid=%d, cqid=%d on CPU %d\n",
+				cqid, cq->queue_id, raw_smp_processor_id());
+}
+
+/**
+ * __lpfc_sli4_process_cq - Process elements of a CQ
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to CQ to be processed
+ * @handler: Routine to process each cqe
+ * @delay: Pointer to usdelay to set in case of rescheduling of the handler
+ * @poll_mode: Polling mode we were called from
+ *
+ * This routine processes completion queue entries in a CQ. While a valid
+ * queue element is found, the handler is called. During processing checks
+ * are made for periodic doorbell writes to let the hardware know of
+ * element consumption.
+ *
+ * If the max limit on cqes to process is hit, or there are no more valid
+ * entries, the loop stops. If we processed a sufficient number of elements,
+ * meaning there is sufficient load, rather than rearming and generating
+ * another interrupt, a cq rescheduling delay will be set. A delay of 0
+ * indicates no rescheduling.
+ *
+ * Returns True if work scheduled, False otherwise.
+ **/
+static bool
+__lpfc_sli4_process_cq(struct lpfc_hba *phba, struct lpfc_queue *cq,
+	bool (*handler)(struct lpfc_hba *, struct lpfc_queue *,
+			struct lpfc_cqe *), unsigned long *delay,
+			enum lpfc_poll_mode poll_mode)
+{
+	struct lpfc_cqe *cqe;
+	bool workposted = false;
+	int count = 0, consumed = 0;
+	bool arm = true;
+
+	/* default - no reschedule */
+	*delay = 0;
+
+	if (cmpxchg(&cq->queue_claimed, 0, 1) != 0)
+		goto rearm_and_exit;
+
+	/* Process all the entries to the CQ */
+	cq->q_flag = 0;
+	cqe = lpfc_sli4_cq_get(cq);
+	while (cqe) {
+		workposted |= handler(phba, cq, cqe);
+		__lpfc_sli4_consume_cqe(phba, cq, cqe);
+
+		consumed++;
+		if (!(++count % cq->max_proc_limit))
+			break;
+
+		if (!(count % cq->notify_interval)) {
+			phba->sli4_hba.sli4_write_cq_db(phba, cq, consumed,
+						LPFC_QUEUE_NOARM);
+			consumed = 0;
+			cq->assoc_qp->q_flag |= HBA_EQ_DELAY_CHK;
+		}
+
+		if (count == LPFC_NVMET_CQ_NOTIFY)
+			cq->q_flag |= HBA_NVMET_CQ_NOTIFY;
+
+		cqe = lpfc_sli4_cq_get(cq);
+	}
+	if (count >= phba->cfg_cq_poll_threshold) {
+		*delay = 1;
+		arm = false;
+	}
+
+	/* Note: complete the irq_poll softirq before rearming CQ */
+	if (poll_mode == LPFC_IRQ_POLL)
+		irq_poll_complete(&cq->iop);
+
+	/* Track the max number of CQEs processed in 1 EQ */
+	if (count > cq->CQ_max_cqe)
+		cq->CQ_max_cqe = count;
+
+	cq->assoc_qp->EQ_cqe_cnt += count;
+
+	/* Catch the no cq entry condition */
+	if (unlikely(count == 0))
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"0369 No entry from completion queue "
+				"qid=%d\n", cq->queue_id);
+
+	xchg(&cq->queue_claimed, 0);
+
+rearm_and_exit:
+	phba->sli4_hba.sli4_write_cq_db(phba, cq, consumed,
+			arm ?  LPFC_QUEUE_REARM : LPFC_QUEUE_NOARM);
+
+	return workposted;
+}
+
+/**
+ * __lpfc_sli4_sp_process_cq - Process a slow-path event queue entry
+ * @cq: pointer to CQ to process
+ *
+ * This routine calls the cq processing routine with a handler specific
+ * to the type of queue bound to it.
+ *
+ * The CQ routine returns two values: the first is the calling status,
+ * which indicates whether work was queued to the  background discovery
+ * thread. If true, the routine should wakeup the discovery thread;
+ * the second is the delay parameter. If non-zero, rather than rearming
+ * the CQ and yet another interrupt, the CQ handler should be queued so
+ * that it is processed in a subsequent polling action. The value of
+ * the delay indicates when to reschedule it.
+ **/
+static void
+__lpfc_sli4_sp_process_cq(struct lpfc_queue *cq)
+{
+	struct lpfc_hba *phba = cq->phba;
+	unsigned long delay;
+	bool workposted = false;
+	int ret = 0;
+
+	/* Process and rearm the CQ */
+	switch (cq->type) {
+	case LPFC_MCQ:
+		workposted |= __lpfc_sli4_process_cq(phba, cq,
+						lpfc_sli4_sp_handle_mcqe,
+						&delay, LPFC_QUEUE_WORK);
+		break;
+	case LPFC_WCQ:
+		if (cq->subtype == LPFC_IO)
+			workposted |= __lpfc_sli4_process_cq(phba, cq,
+						lpfc_sli4_fp_handle_cqe,
+						&delay, LPFC_QUEUE_WORK);
+		else
+			workposted |= __lpfc_sli4_process_cq(phba, cq,
+						lpfc_sli4_sp_handle_cqe,
+						&delay, LPFC_QUEUE_WORK);
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0370 Invalid completion queue type (%d)\n",
+				cq->type);
+		return;
+	}
+
+	if (delay) {
+		if (is_kdump_kernel())
+			ret = queue_delayed_work(phba->wq, &cq->sched_spwork,
+						delay);
+		else
+			ret = queue_delayed_work_on(cq->chann, phba->wq,
+						&cq->sched_spwork, delay);
+		if (!ret)
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0394 Cannot schedule queue work "
+				"for cqid=%d on CPU %d\n",
+				cq->queue_id, cq->chann);
+	}
+
+	/* wake up worker thread if there are works to be done */
+	if (workposted)
+		lpfc_worker_wake_up(phba);
+}
+
+/**
+ * lpfc_sli4_sp_process_cq - slow-path work handler when started by
+ *   interrupt
+ * @work: pointer to work element
+ *
+ * translates from the work handler and calls the slow-path handler.
+ **/
+static void
+lpfc_sli4_sp_process_cq(struct work_struct *work)
+{
+	struct lpfc_queue *cq = container_of(work, struct lpfc_queue, spwork);
+
+	__lpfc_sli4_sp_process_cq(cq);
+}
+
+/**
+ * lpfc_sli4_dly_sp_process_cq - slow-path work handler when started by timer
+ * @work: pointer to work element
+ *
+ * translates from the work handler and calls the slow-path handler.
+ **/
+static void
+lpfc_sli4_dly_sp_process_cq(struct work_struct *work)
+{
+	struct lpfc_queue *cq = container_of(to_delayed_work(work),
+					struct lpfc_queue, sched_spwork);
+
+	__lpfc_sli4_sp_process_cq(cq);
+}
+
+/**
+ * lpfc_sli4_fp_handle_fcp_wcqe - Process fast-path work queue completion entry
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to associated CQ
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine process a fast-path work queue completion entry from fast-path
+ * event queue for FCP command response completion.
+ **/
+static void
+lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			     struct lpfc_wcqe_complete *wcqe)
+{
+	struct lpfc_sli_ring *pring = cq->pring;
+	struct lpfc_iocbq *cmdiocbq;
+	unsigned long iflags;
+
+	/* Check for response status */
+	if (unlikely(bf_get(lpfc_wcqe_c_status, wcqe))) {
+		/* If resource errors reported from HBA, reduce queue
+		 * depth of the SCSI device.
+		 */
+		if (((bf_get(lpfc_wcqe_c_status, wcqe) ==
+		     IOSTAT_LOCAL_REJECT)) &&
+		    ((wcqe->parameter & IOERR_PARAM_MASK) ==
+		     IOERR_NO_RESOURCES))
+			phba->lpfc_rampdown_queue_depth(phba);
+
+		/* Log the cmpl status */
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"0373 FCP CQE cmpl: status=x%x: "
+				"CQE: %08x %08x %08x %08x\n",
+				bf_get(lpfc_wcqe_c_status, wcqe),
+				wcqe->word0, wcqe->total_data_placed,
+				wcqe->parameter, wcqe->word3);
+	}
+
+	/* Look up the FCP command IOCB and create pseudo response IOCB */
+	spin_lock_irqsave(&pring->ring_lock, iflags);
+	pring->stats.iocb_event++;
+	cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+	spin_unlock_irqrestore(&pring->ring_lock, iflags);
+	if (unlikely(!cmdiocbq)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0374 FCP complete with no corresponding "
+				"cmdiocb: iotag (%d)\n",
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+		return;
+	}
+#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+	cmdiocbq->isr_timestamp = cq->isr_timestamp;
+#endif
+	if (bf_get(lpfc_wcqe_c_xb, wcqe)) {
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		cmdiocbq->cmd_flag |= LPFC_EXCHANGE_BUSY;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+	}
+
+	if (cmdiocbq->cmd_cmpl) {
+		/* For FCP the flag is cleared in cmd_cmpl */
+		if (!(cmdiocbq->cmd_flag & LPFC_IO_FCP) &&
+		    cmdiocbq->cmd_flag & LPFC_DRIVER_ABORTED) {
+			spin_lock_irqsave(&phba->hbalock, iflags);
+			cmdiocbq->cmd_flag &= ~LPFC_DRIVER_ABORTED;
+			spin_unlock_irqrestore(&phba->hbalock, iflags);
+		}
+
+		/* Pass the cmd_iocb and the wcqe to the upper layer */
+		memcpy(&cmdiocbq->wcqe_cmpl, wcqe,
+		       sizeof(struct lpfc_wcqe_complete));
+		cmdiocbq->cmd_cmpl(phba, cmdiocbq, cmdiocbq);
+	} else {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"0375 FCP cmdiocb not callback function "
+				"iotag: (%d)\n",
+				bf_get(lpfc_wcqe_c_request_tag, wcqe));
+	}
+}
+
+/**
+ * lpfc_sli4_fp_handle_rel_wcqe - Handle fast-path WQ entry consumed event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to completion queue.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an fast-path WQ entry consumed event by invoking the
+ * proper WQ release routine to the slow-path WQ.
+ **/
+static void
+lpfc_sli4_fp_handle_rel_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			     struct lpfc_wcqe_release *wcqe)
+{
+	struct lpfc_queue *childwq;
+	bool wqid_matched = false;
+	uint16_t hba_wqid;
+
+	/* Check for fast-path FCP work queue release */
+	hba_wqid = bf_get(lpfc_wcqe_r_wq_id, wcqe);
+	list_for_each_entry(childwq, &cq->child_list, list) {
+		if (childwq->queue_id == hba_wqid) {
+			lpfc_sli4_wq_release(childwq,
+					bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+			if (childwq->q_flag & HBA_NVMET_WQFULL)
+				lpfc_nvmet_wqfull_process(phba, childwq);
+			wqid_matched = true;
+			break;
+		}
+	}
+	/* Report warning log message if no match found */
+	if (wqid_matched != true)
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"2580 Fast-path wqe consume event carries "
+				"miss-matched qid: wcqe-qid=x%x\n", hba_wqid);
+}
+
+/**
+ * lpfc_sli4_nvmet_handle_rcqe - Process a receive-queue completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to completion queue.
+ * @rcqe: Pointer to receive-queue completion queue entry.
+ *
+ * This routine process a receive-queue completion queue entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_nvmet_handle_rcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			    struct lpfc_rcqe *rcqe)
+{
+	bool workposted = false;
+	struct lpfc_queue *hrq;
+	struct lpfc_queue *drq;
+	struct rqb_dmabuf *dma_buf;
+	struct fc_frame_header *fc_hdr;
+	struct lpfc_nvmet_tgtport *tgtp;
+	uint32_t status, rq_id;
+	unsigned long iflags;
+	uint32_t fctl, idx;
+
+	if ((phba->nvmet_support == 0) ||
+	    (phba->sli4_hba.nvmet_cqset == NULL))
+		return workposted;
+
+	idx = cq->queue_id - phba->sli4_hba.nvmet_cqset[0]->queue_id;
+	hrq = phba->sli4_hba.nvmet_mrq_hdr[idx];
+	drq = phba->sli4_hba.nvmet_mrq_data[idx];
+
+	/* sanity check on queue memory */
+	if (unlikely(!hrq) || unlikely(!drq))
+		return workposted;
+
+	if (bf_get(lpfc_cqe_code, rcqe) == CQE_CODE_RECEIVE_V1)
+		rq_id = bf_get(lpfc_rcqe_rq_id_v1, rcqe);
+	else
+		rq_id = bf_get(lpfc_rcqe_rq_id, rcqe);
+
+	if ((phba->nvmet_support == 0) ||
+	    (rq_id != hrq->queue_id))
+		return workposted;
+
+	status = bf_get(lpfc_rcqe_status, rcqe);
+	switch (status) {
+	case FC_STATUS_RQ_BUF_LEN_EXCEEDED:
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"6126 Receive Frame Truncated!!\n");
+		fallthrough;
+	case FC_STATUS_RQ_SUCCESS:
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		lpfc_sli4_rq_release(hrq, drq);
+		dma_buf = lpfc_sli_rqbuf_get(phba, hrq);
+		if (!dma_buf) {
+			hrq->RQ_no_buf_found++;
+			spin_unlock_irqrestore(&phba->hbalock, iflags);
+			goto out;
+		}
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		hrq->RQ_rcv_buf++;
+		hrq->RQ_buf_posted--;
+		fc_hdr = (struct fc_frame_header *)dma_buf->hbuf.virt;
+
+		/* Just some basic sanity checks on FCP Command frame */
+		fctl = (fc_hdr->fh_f_ctl[0] << 16 |
+			fc_hdr->fh_f_ctl[1] << 8 |
+			fc_hdr->fh_f_ctl[2]);
+		if (((fctl &
+		    (FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT)) !=
+		    (FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT)) ||
+		    (fc_hdr->fh_seq_cnt != 0)) /* 0 byte swapped is still 0 */
+			goto drop;
+
+		if (fc_hdr->fh_type == FC_TYPE_FCP) {
+			dma_buf->bytes_recv = bf_get(lpfc_rcqe_length, rcqe);
+			lpfc_nvmet_unsol_fcp_event(
+				phba, idx, dma_buf, cq->isr_timestamp,
+				cq->q_flag & HBA_NVMET_CQ_NOTIFY);
+			return false;
+		}
+drop:
+		lpfc_rq_buf_free(phba, &dma_buf->hbuf);
+		break;
+	case FC_STATUS_INSUFF_BUF_FRM_DISC:
+		if (phba->nvmet_support) {
+			tgtp = phba->targetport->private;
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"6401 RQE Error x%x, posted %d err_cnt "
+					"%d: %x %x %x\n",
+					status, hrq->RQ_buf_posted,
+					hrq->RQ_no_posted_buf,
+					atomic_read(&tgtp->rcv_fcp_cmd_in),
+					atomic_read(&tgtp->rcv_fcp_cmd_out),
+					atomic_read(&tgtp->xmt_fcp_release));
+		}
+		fallthrough;
+
+	case FC_STATUS_INSUFF_BUF_NEED_BUF:
+		hrq->RQ_no_posted_buf++;
+		/* Post more buffers if possible */
+		break;
+	}
+out:
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_fp_handle_cqe - Process fast-path work queue completion entry
+ * @phba: adapter with cq
+ * @cq: Pointer to the completion queue.
+ * @cqe: Pointer to fast-path completion queue entry.
+ *
+ * This routine process a fast-path work queue completion entry from fast-path
+ * event queue for FCP command response completion.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_fp_handle_cqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+			 struct lpfc_cqe *cqe)
+{
+	struct lpfc_wcqe_release wcqe;
+	bool workposted = false;
+
+	/* Copy the work queue CQE and convert endian order if needed */
+	lpfc_sli4_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
+
+	/* Check and process for different type of WCQE and dispatch */
+	switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
+	case CQE_CODE_COMPL_WQE:
+	case CQE_CODE_NVME_ERSP:
+		cq->CQ_wq++;
+		/* Process the WQ complete event */
+		phba->last_completion_time = jiffies;
+		if (cq->subtype == LPFC_IO || cq->subtype == LPFC_NVME_LS)
+			lpfc_sli4_fp_handle_fcp_wcqe(phba, cq,
+				(struct lpfc_wcqe_complete *)&wcqe);
+		break;
+	case CQE_CODE_RELEASE_WQE:
+		cq->CQ_release_wqe++;
+		/* Process the WQ release event */
+		lpfc_sli4_fp_handle_rel_wcqe(phba, cq,
+				(struct lpfc_wcqe_release *)&wcqe);
+		break;
+	case CQE_CODE_XRI_ABORTED:
+		cq->CQ_xri_aborted++;
+		/* Process the WQ XRI abort event */
+		phba->last_completion_time = jiffies;
+		workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+				(struct sli4_wcqe_xri_aborted *)&wcqe);
+		break;
+	case CQE_CODE_RECEIVE_V1:
+	case CQE_CODE_RECEIVE:
+		phba->last_completion_time = jiffies;
+		if (cq->subtype == LPFC_NVMET) {
+			workposted = lpfc_sli4_nvmet_handle_rcqe(
+				phba, cq, (struct lpfc_rcqe *)&wcqe);
+		}
+		break;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0144 Not a valid CQE code: x%x\n",
+				bf_get(lpfc_wcqe_c_code, &wcqe));
+		break;
+	}
+	return workposted;
+}
+
+/**
+ * lpfc_sli4_sched_cq_work - Schedules cq work
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to CQ
+ * @cqid: CQ ID
+ *
+ * This routine checks the poll mode of the CQ corresponding to
+ * cq->chann, then either schedules a softirq or queue_work to complete
+ * cq work.
+ *
+ * queue_work path is taken if in NVMET mode, or if poll_mode is in
+ * LPFC_QUEUE_WORK mode.  Otherwise, softirq path is taken.
+ *
+ **/
+static void lpfc_sli4_sched_cq_work(struct lpfc_hba *phba,
+				    struct lpfc_queue *cq, uint16_t cqid)
+{
+	int ret = 0;
+
+	switch (cq->poll_mode) {
+	case LPFC_IRQ_POLL:
+		/* CGN mgmt is mutually exclusive from softirq processing */
+		if (phba->cmf_active_mode == LPFC_CFG_OFF) {
+			irq_poll_sched(&cq->iop);
+			break;
+		}
+		fallthrough;
+	case LPFC_QUEUE_WORK:
+	default:
+		if (is_kdump_kernel())
+			ret = queue_work(phba->wq, &cq->irqwork);
+		else
+			ret = queue_work_on(cq->chann, phba->wq, &cq->irqwork);
+		if (!ret)
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"0383 Cannot schedule queue work "
+					"for CQ eqcqid=%d, cqid=%d on CPU %d\n",
+					cqid, cq->queue_id,
+					raw_smp_processor_id());
+	}
+}
+
+/**
+ * lpfc_sli4_hba_handle_eqe - Process a fast-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eq: Pointer to the queue structure.
+ * @eqe: Pointer to fast-path event queue entry.
+ *
+ * This routine process a event queue entry from the fast-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on the completion queue, rearm the
+ * completion queue, and then return.
+ **/
+static void
+lpfc_sli4_hba_handle_eqe(struct lpfc_hba *phba, struct lpfc_queue *eq,
+			 struct lpfc_eqe *eqe)
+{
+	struct lpfc_queue *cq = NULL;
+	uint32_t qidx = eq->hdwq;
+	uint16_t cqid, id;
+
+	if (unlikely(bf_get_le32(lpfc_eqe_major_code, eqe) != 0)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0366 Not a valid completion "
+				"event: majorcode=x%x, minorcode=x%x\n",
+				bf_get_le32(lpfc_eqe_major_code, eqe),
+				bf_get_le32(lpfc_eqe_minor_code, eqe));
+		return;
+	}
+
+	/* Get the reference to the corresponding CQ */
+	cqid = bf_get_le32(lpfc_eqe_resource_id, eqe);
+
+	/* Use the fast lookup method first */
+	if (cqid <= phba->sli4_hba.cq_max) {
+		cq = phba->sli4_hba.cq_lookup[cqid];
+		if (cq)
+			goto  work_cq;
+	}
+
+	/* Next check for NVMET completion */
+	if (phba->cfg_nvmet_mrq && phba->sli4_hba.nvmet_cqset) {
+		id = phba->sli4_hba.nvmet_cqset[0]->queue_id;
+		if ((cqid >= id) && (cqid < (id + phba->cfg_nvmet_mrq))) {
+			/* Process NVMET unsol rcv */
+			cq = phba->sli4_hba.nvmet_cqset[cqid - id];
+			goto  process_cq;
+		}
+	}
+
+	if (phba->sli4_hba.nvmels_cq &&
+	    (cqid == phba->sli4_hba.nvmels_cq->queue_id)) {
+		/* Process NVME unsol rcv */
+		cq = phba->sli4_hba.nvmels_cq;
+	}
+
+	/* Otherwise this is a Slow path event */
+	if (cq == NULL) {
+		lpfc_sli4_sp_handle_eqe(phba, eqe,
+					phba->sli4_hba.hdwq[qidx].hba_eq);
+		return;
+	}
+
+process_cq:
+	if (unlikely(cqid != cq->queue_id)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0368 Miss-matched fast-path completion "
+				"queue identifier: eqcqid=%d, fcpcqid=%d\n",
+				cqid, cq->queue_id);
+		return;
+	}
+
+work_cq:
+#if defined(CONFIG_SCSI_LPFC_DEBUG_FS)
+	if (phba->ktime_on)
+		cq->isr_timestamp = ktime_get_ns();
+	else
+		cq->isr_timestamp = 0;
+#endif
+	lpfc_sli4_sched_cq_work(phba, cq, cqid);
+}
+
+/**
+ * __lpfc_sli4_hba_process_cq - Process a fast-path event queue entry
+ * @cq: Pointer to CQ to be processed
+ * @poll_mode: Enum lpfc_poll_state to determine poll mode
+ *
+ * This routine calls the cq processing routine with the handler for
+ * fast path CQEs.
+ *
+ * The CQ routine returns two values: the first is the calling status,
+ * which indicates whether work was queued to the  background discovery
+ * thread. If true, the routine should wakeup the discovery thread;
+ * the second is the delay parameter. If non-zero, rather than rearming
+ * the CQ and yet another interrupt, the CQ handler should be queued so
+ * that it is processed in a subsequent polling action. The value of
+ * the delay indicates when to reschedule it.
+ **/
+static void
+__lpfc_sli4_hba_process_cq(struct lpfc_queue *cq,
+			   enum lpfc_poll_mode poll_mode)
+{
+	struct lpfc_hba *phba = cq->phba;
+	unsigned long delay;
+	bool workposted = false;
+	int ret = 0;
+
+	/* process and rearm the CQ */
+	workposted |= __lpfc_sli4_process_cq(phba, cq, lpfc_sli4_fp_handle_cqe,
+					     &delay, poll_mode);
+
+	if (delay) {
+		if (is_kdump_kernel())
+			ret = queue_delayed_work(phba->wq, &cq->sched_irqwork,
+						delay);
+		else
+			ret = queue_delayed_work_on(cq->chann, phba->wq,
+						&cq->sched_irqwork, delay);
+		if (!ret)
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"0367 Cannot schedule queue work "
+					"for cqid=%d on CPU %d\n",
+					cq->queue_id, cq->chann);
+	}
+
+	/* wake up worker thread if there are works to be done */
+	if (workposted)
+		lpfc_worker_wake_up(phba);
+}
+
+/**
+ * lpfc_sli4_hba_process_cq - fast-path work handler when started by
+ *   interrupt
+ * @work: pointer to work element
+ *
+ * translates from the work handler and calls the fast-path handler.
+ **/
+static void
+lpfc_sli4_hba_process_cq(struct work_struct *work)
+{
+	struct lpfc_queue *cq = container_of(work, struct lpfc_queue, irqwork);
+
+	__lpfc_sli4_hba_process_cq(cq, LPFC_QUEUE_WORK);
+}
+
+/**
+ * lpfc_sli4_dly_hba_process_cq - fast-path work handler when started by timer
+ * @work: pointer to work element
+ *
+ * translates from the work handler and calls the fast-path handler.
+ **/
+static void
+lpfc_sli4_dly_hba_process_cq(struct work_struct *work)
+{
+	struct lpfc_queue *cq = container_of(to_delayed_work(work),
+					struct lpfc_queue, sched_irqwork);
+
+	__lpfc_sli4_hba_process_cq(cq, LPFC_QUEUE_WORK);
+}
+
+/**
+ * lpfc_sli4_hba_intr_handler - HBA interrupt handler to SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when device with SLI-4 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there is a fast-path FCP IOCB
+ * ring event in the HBA. However, when the device is enabled with either
+ * MSI or Pin-IRQ interrupt mode, this function is called as part of the
+ * device-level interrupt handler. When the PCI slot is in error recovery
+ * or the HBA is undergoing initialization, the interrupt handler will not
+ * process the interrupt. The SCSI FCP fast-path ring event are handled in
+ * the intrrupt context. This function is called without any lock held.
+ * It gets the hbalock to access and update SLI data structures. Note that,
+ * the FCP EQ to FCP CQ are one-to-one map such that the FCP EQ index is
+ * equal to that of FCP CQ index.
+ *
+ * The link attention and ELS ring attention events are handled
+ * by the worker thread. The interrupt handler signals the worker thread
+ * and returns for these events. This function is called without any lock
+ * held. It gets the hbalock to access and update SLI data structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_hba_intr_handler(int irq, void *dev_id)
+{
+	struct lpfc_hba *phba;
+	struct lpfc_hba_eq_hdl *hba_eq_hdl;
+	struct lpfc_queue *fpeq;
+	unsigned long iflag;
+	int ecount = 0;
+	int hba_eqidx;
+	struct lpfc_eq_intr_info *eqi;
+
+	/* Get the driver's phba structure from the dev_id */
+	hba_eq_hdl = (struct lpfc_hba_eq_hdl *)dev_id;
+	phba = hba_eq_hdl->phba;
+	hba_eqidx = hba_eq_hdl->idx;
+
+	if (unlikely(!phba))
+		return IRQ_NONE;
+	if (unlikely(!phba->sli4_hba.hdwq))
+		return IRQ_NONE;
+
+	/* Get to the EQ struct associated with this vector */
+	fpeq = phba->sli4_hba.hba_eq_hdl[hba_eqidx].eq;
+	if (unlikely(!fpeq))
+		return IRQ_NONE;
+
+	/* Check device state for handling interrupt */
+	if (unlikely(lpfc_intr_state_check(phba))) {
+		/* Check again for link_state with lock held */
+		spin_lock_irqsave(&phba->hbalock, iflag);
+		if (phba->link_state < LPFC_LINK_DOWN)
+			/* Flush, clear interrupt, and rearm the EQ */
+			lpfc_sli4_eqcq_flush(phba, fpeq);
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		return IRQ_NONE;
+	}
+
+	eqi = this_cpu_ptr(phba->sli4_hba.eq_info);
+	eqi->icnt++;
+
+	fpeq->last_cpu = raw_smp_processor_id();
+
+	if (eqi->icnt > LPFC_EQD_ISR_TRIGGER &&
+	    fpeq->q_flag & HBA_EQ_DELAY_CHK &&
+	    phba->cfg_auto_imax &&
+	    fpeq->q_mode != LPFC_MAX_AUTO_EQ_DELAY &&
+	    phba->sli.sli_flag & LPFC_SLI_USE_EQDR)
+		lpfc_sli4_mod_hba_eq_delay(phba, fpeq, LPFC_MAX_AUTO_EQ_DELAY);
+
+	/* process and rearm the EQ */
+	ecount = lpfc_sli4_process_eq(phba, fpeq, LPFC_QUEUE_REARM);
+
+	if (unlikely(ecount == 0)) {
+		fpeq->EQ_no_entry++;
+		if (phba->intr_type == MSIX)
+			/* MSI-X treated interrupt served as no EQ share INT */
+			lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+					"0358 MSI-X interrupt with no EQE\n");
+		else
+			/* Non MSI-X treated on interrupt as EQ share INT */
+			return IRQ_NONE;
+	}
+
+	return IRQ_HANDLED;
+} /* lpfc_sli4_hba_intr_handler */
+
+/**
+ * lpfc_sli4_intr_handler - Device-level interrupt handler for SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is the device-level interrupt handler to device with SLI-4
+ * interface spec, called from the PCI layer when either MSI or Pin-IRQ
+ * interrupt mode is enabled and there is an event in the HBA which requires
+ * driver attention. This function invokes the slow-path interrupt attention
+ * handling function and fast-path interrupt attention handling function in
+ * turn to process the relevant HBA attention events. This function is called
+ * without any lock held. It gets the hbalock to access and update SLI data
+ * structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled, else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_intr_handler(int irq, void *dev_id)
+{
+	struct lpfc_hba  *phba;
+	irqreturn_t hba_irq_rc;
+	bool hba_handled = false;
+	int qidx;
+
+	/* Get the driver's phba structure from the dev_id */
+	phba = (struct lpfc_hba *)dev_id;
+
+	if (unlikely(!phba))
+		return IRQ_NONE;
+
+	/*
+	 * Invoke fast-path host attention interrupt handling as appropriate.
+	 */
+	for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) {
+		hba_irq_rc = lpfc_sli4_hba_intr_handler(irq,
+					&phba->sli4_hba.hba_eq_hdl[qidx]);
+		if (hba_irq_rc == IRQ_HANDLED)
+			hba_handled |= true;
+	}
+
+	return (hba_handled == true) ? IRQ_HANDLED : IRQ_NONE;
+} /* lpfc_sli4_intr_handler */
+
+void lpfc_sli4_poll_hbtimer(struct timer_list *t)
+{
+	struct lpfc_hba *phba = from_timer(phba, t, cpuhp_poll_timer);
+	struct lpfc_queue *eq;
+	int i = 0;
+
+	rcu_read_lock();
+
+	list_for_each_entry_rcu(eq, &phba->poll_list, _poll_list)
+		i += lpfc_sli4_poll_eq(eq, LPFC_POLL_SLOWPATH);
+	if (!list_empty(&phba->poll_list))
+		mod_timer(&phba->cpuhp_poll_timer,
+			  jiffies + msecs_to_jiffies(LPFC_POLL_HB));
+
+	rcu_read_unlock();
+}
+
+inline int lpfc_sli4_poll_eq(struct lpfc_queue *eq, uint8_t path)
+{
+	struct lpfc_hba *phba = eq->phba;
+	int i = 0;
+
+	/*
+	 * Unlocking an irq is one of the entry point to check
+	 * for re-schedule, but we are good for io submission
+	 * path as midlayer does a get_cpu to glue us in. Flush
+	 * out the invalidate queue so we can see the updated
+	 * value for flag.
+	 */
+	smp_rmb();
+
+	if (READ_ONCE(eq->mode) == LPFC_EQ_POLL)
+		/* We will not likely get the completion for the caller
+		 * during this iteration but i guess that's fine.
+		 * Future io's coming on this eq should be able to
+		 * pick it up.  As for the case of single io's, they
+		 * will be handled through a sched from polling timer
+		 * function which is currently triggered every 1msec.
+		 */
+		i = lpfc_sli4_process_eq(phba, eq, LPFC_QUEUE_NOARM);
+
+	return i;
+}
+
+static inline void lpfc_sli4_add_to_poll_list(struct lpfc_queue *eq)
+{
+	struct lpfc_hba *phba = eq->phba;
+
+	/* kickstart slowpath processing if needed */
+	if (list_empty(&phba->poll_list))
+		mod_timer(&phba->cpuhp_poll_timer,
+			  jiffies + msecs_to_jiffies(LPFC_POLL_HB));
+
+	list_add_rcu(&eq->_poll_list, &phba->poll_list);
+	synchronize_rcu();
+}
+
+static inline void lpfc_sli4_remove_from_poll_list(struct lpfc_queue *eq)
+{
+	struct lpfc_hba *phba = eq->phba;
+
+	/* Disable slowpath processing for this eq.  Kick start the eq
+	 * by RE-ARMING the eq's ASAP
+	 */
+	list_del_rcu(&eq->_poll_list);
+	synchronize_rcu();
+
+	if (list_empty(&phba->poll_list))
+		del_timer_sync(&phba->cpuhp_poll_timer);
+}
+
+void lpfc_sli4_cleanup_poll_list(struct lpfc_hba *phba)
+{
+	struct lpfc_queue *eq, *next;
+
+	list_for_each_entry_safe(eq, next, &phba->poll_list, _poll_list)
+		list_del(&eq->_poll_list);
+
+	INIT_LIST_HEAD(&phba->poll_list);
+	synchronize_rcu();
+}
+
+static inline void
+__lpfc_sli4_switch_eqmode(struct lpfc_queue *eq, uint8_t mode)
+{
+	if (mode == eq->mode)
+		return;
+	/*
+	 * currently this function is only called during a hotplug
+	 * event and the cpu on which this function is executing
+	 * is going offline.  By now the hotplug has instructed
+	 * the scheduler to remove this cpu from cpu active mask.
+	 * So we don't need to work about being put aside by the
+	 * scheduler for a high priority process.  Yes, the inte-
+	 * rrupts could come but they are known to retire ASAP.
+	 */
+
+	/* Disable polling in the fastpath */
+	WRITE_ONCE(eq->mode, mode);
+	/* flush out the store buffer */
+	smp_wmb();
+
+	/*
+	 * Add this eq to the polling list and start polling. For
+	 * a grace period both interrupt handler and poller will
+	 * try to process the eq _but_ that's fine.  We have a
+	 * synchronization mechanism in place (queue_claimed) to
+	 * deal with it.  This is just a draining phase for int-
+	 * errupt handler (not eq's) as we have guranteed through
+	 * barrier that all the CPUs have seen the new CQ_POLLED
+	 * state. which will effectively disable the REARMING of
+	 * the EQ.  The whole idea is eq's die off eventually as
+	 * we are not rearming EQ's anymore.
+	 */
+	mode ? lpfc_sli4_add_to_poll_list(eq) :
+	       lpfc_sli4_remove_from_poll_list(eq);
+}
+
+void lpfc_sli4_start_polling(struct lpfc_queue *eq)
+{
+	__lpfc_sli4_switch_eqmode(eq, LPFC_EQ_POLL);
+}
+
+void lpfc_sli4_stop_polling(struct lpfc_queue *eq)
+{
+	struct lpfc_hba *phba = eq->phba;
+
+	__lpfc_sli4_switch_eqmode(eq, LPFC_EQ_INTERRUPT);
+
+	/* Kick start for the pending io's in h/w.
+	 * Once we switch back to interrupt processing on a eq
+	 * the io path completion will only arm eq's when it
+	 * receives a completion.  But since eq's are in disa-
+	 * rmed state it doesn't receive a completion.  This
+	 * creates a deadlock scenaro.
+	 */
+	phba->sli4_hba.sli4_write_eq_db(phba, eq, 0, LPFC_QUEUE_REARM);
+}
+
+/**
+ * lpfc_sli4_queue_free - free a queue structure and associated memory
+ * @queue: The queue structure to free.
+ *
+ * This function frees a queue structure and the DMAable memory used for
+ * the host resident queue. This function must be called after destroying the
+ * queue on the HBA.
+ **/
+void
+lpfc_sli4_queue_free(struct lpfc_queue *queue)
+{
+	struct lpfc_dmabuf *dmabuf;
+
+	if (!queue)
+		return;
+
+	if (!list_empty(&queue->wq_list))
+		list_del(&queue->wq_list);
+
+	while (!list_empty(&queue->page_list)) {
+		list_remove_head(&queue->page_list, dmabuf, struct lpfc_dmabuf,
+				 list);
+		dma_free_coherent(&queue->phba->pcidev->dev, queue->page_size,
+				  dmabuf->virt, dmabuf->phys);
+		kfree(dmabuf);
+	}
+	if (queue->rqbp) {
+		lpfc_free_rq_buffer(queue->phba, queue);
+		kfree(queue->rqbp);
+	}
+
+	if (!list_empty(&queue->cpu_list))
+		list_del(&queue->cpu_list);
+
+	kfree(queue);
+	return;
+}
+
+/**
+ * lpfc_sli4_queue_alloc - Allocate and initialize a queue structure
+ * @phba: The HBA that this queue is being created on.
+ * @page_size: The size of a queue page
+ * @entry_size: The size of each queue entry for this queue.
+ * @entry_count: The number of entries that this queue will handle.
+ * @cpu: The cpu that will primarily utilize this queue.
+ *
+ * This function allocates a queue structure and the DMAable memory used for
+ * the host resident queue. This function must be called before creating the
+ * queue on the HBA.
+ **/
+struct lpfc_queue *
+lpfc_sli4_queue_alloc(struct lpfc_hba *phba, uint32_t page_size,
+		      uint32_t entry_size, uint32_t entry_count, int cpu)
+{
+	struct lpfc_queue *queue;
+	struct lpfc_dmabuf *dmabuf;
+	uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz;
+	uint16_t x, pgcnt;
+
+	if (!phba->sli4_hba.pc_sli4_params.supported)
+		hw_page_size = page_size;
+
+	pgcnt = ALIGN(entry_size * entry_count, hw_page_size) / hw_page_size;
+
+	/* If needed, Adjust page count to match the max the adapter supports */
+	if (pgcnt > phba->sli4_hba.pc_sli4_params.wqpcnt)
+		pgcnt = phba->sli4_hba.pc_sli4_params.wqpcnt;
+
+	queue = kzalloc_node(sizeof(*queue) + (sizeof(void *) * pgcnt),
+			     GFP_KERNEL, cpu_to_node(cpu));
+	if (!queue)
+		return NULL;
+
+	INIT_LIST_HEAD(&queue->list);
+	INIT_LIST_HEAD(&queue->_poll_list);
+	INIT_LIST_HEAD(&queue->wq_list);
+	INIT_LIST_HEAD(&queue->wqfull_list);
+	INIT_LIST_HEAD(&queue->page_list);
+	INIT_LIST_HEAD(&queue->child_list);
+	INIT_LIST_HEAD(&queue->cpu_list);
+
+	/* Set queue parameters now.  If the system cannot provide memory
+	 * resources, the free routine needs to know what was allocated.
+	 */
+	queue->page_count = pgcnt;
+	queue->q_pgs = (void **)&queue[1];
+	queue->entry_cnt_per_pg = hw_page_size / entry_size;
+	queue->entry_size = entry_size;
+	queue->entry_count = entry_count;
+	queue->page_size = hw_page_size;
+	queue->phba = phba;
+
+	for (x = 0; x < queue->page_count; x++) {
+		dmabuf = kzalloc_node(sizeof(*dmabuf), GFP_KERNEL,
+				      dev_to_node(&phba->pcidev->dev));
+		if (!dmabuf)
+			goto out_fail;
+		dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+						  hw_page_size, &dmabuf->phys,
+						  GFP_KERNEL);
+		if (!dmabuf->virt) {
+			kfree(dmabuf);
+			goto out_fail;
+		}
+		dmabuf->buffer_tag = x;
+		list_add_tail(&dmabuf->list, &queue->page_list);
+		/* use lpfc_sli4_qe to index a paritcular entry in this page */
+		queue->q_pgs[x] = dmabuf->virt;
+	}
+	INIT_WORK(&queue->irqwork, lpfc_sli4_hba_process_cq);
+	INIT_WORK(&queue->spwork, lpfc_sli4_sp_process_cq);
+	INIT_DELAYED_WORK(&queue->sched_irqwork, lpfc_sli4_dly_hba_process_cq);
+	INIT_DELAYED_WORK(&queue->sched_spwork, lpfc_sli4_dly_sp_process_cq);
+
+	/* notify_interval will be set during q creation */
+
+	return queue;
+out_fail:
+	lpfc_sli4_queue_free(queue);
+	return NULL;
+}
+
+/**
+ * lpfc_dual_chute_pci_bar_map - Map pci base address register to host memory
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @pci_barset: PCI BAR set flag.
+ *
+ * This function shall perform iomap of the specified PCI BAR address to host
+ * memory address if not already done so and return it. The returned host
+ * memory address can be NULL.
+ */
+static void __iomem *
+lpfc_dual_chute_pci_bar_map(struct lpfc_hba *phba, uint16_t pci_barset)
+{
+	if (!phba->pcidev)
+		return NULL;
+
+	switch (pci_barset) {
+	case WQ_PCI_BAR_0_AND_1:
+		return phba->pci_bar0_memmap_p;
+	case WQ_PCI_BAR_2_AND_3:
+		return phba->pci_bar2_memmap_p;
+	case WQ_PCI_BAR_4_AND_5:
+		return phba->pci_bar4_memmap_p;
+	default:
+		break;
+	}
+	return NULL;
+}
+
+/**
+ * lpfc_modify_hba_eq_delay - Modify Delay Multiplier on EQs
+ * @phba: HBA structure that EQs are on.
+ * @startq: The starting EQ index to modify
+ * @numq: The number of EQs (consecutive indexes) to modify
+ * @usdelay: amount of delay
+ *
+ * This function revises the EQ delay on 1 or more EQs. The EQ delay
+ * is set either by writing to a register (if supported by the SLI Port)
+ * or by mailbox command. The mailbox command allows several EQs to be
+ * updated at once.
+ *
+ * The @phba struct is used to send a mailbox command to HBA. The @startq
+ * is used to get the starting EQ index to change. The @numq value is
+ * used to specify how many consecutive EQ indexes, starting at EQ index,
+ * are to be changed. This function is asynchronous and will wait for any
+ * mailbox commands to finish before returning.
+ *
+ * On success this function will return a zero. If unable to allocate
+ * enough memory this function will return -ENOMEM. If a mailbox command
+ * fails this function will return -ENXIO. Note: on ENXIO, some EQs may
+ * have had their delay multipler changed.
+ **/
+void
+lpfc_modify_hba_eq_delay(struct lpfc_hba *phba, uint32_t startq,
+			 uint32_t numq, uint32_t usdelay)
+{
+	struct lpfc_mbx_modify_eq_delay *eq_delay;
+	LPFC_MBOXQ_t *mbox;
+	struct lpfc_queue *eq;
+	int cnt = 0, rc, length;
+	uint32_t shdr_status, shdr_add_status;
+	uint32_t dmult;
+	int qidx;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (startq >= phba->cfg_irq_chann)
+		return;
+
+	if (usdelay > 0xFFFF) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP | LOG_NVME,
+				"6429 usdelay %d too large. Scaled down to "
+				"0xFFFF.\n", usdelay);
+		usdelay = 0xFFFF;
+	}
+
+	/* set values by EQ_DELAY register if supported */
+	if (phba->sli.sli_flag & LPFC_SLI_USE_EQDR) {
+		for (qidx = startq; qidx < phba->cfg_irq_chann; qidx++) {
+			eq = phba->sli4_hba.hba_eq_hdl[qidx].eq;
+			if (!eq)
+				continue;
+
+			lpfc_sli4_mod_hba_eq_delay(phba, eq, usdelay);
+
+			if (++cnt >= numq)
+				break;
+		}
+		return;
+	}
+
+	/* Otherwise, set values by mailbox cmd */
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"6428 Failed allocating mailbox cmd buffer."
+				" EQ delay was not set.\n");
+		return;
+	}
+	length = (sizeof(struct lpfc_mbx_modify_eq_delay) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_MODIFY_EQ_DELAY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	eq_delay = &mbox->u.mqe.un.eq_delay;
+
+	/* Calculate delay multiper from maximum interrupt per second */
+	dmult = (usdelay * LPFC_DMULT_CONST) / LPFC_SEC_TO_USEC;
+	if (dmult)
+		dmult--;
+	if (dmult > LPFC_DMULT_MAX)
+		dmult = LPFC_DMULT_MAX;
+
+	for (qidx = startq; qidx < phba->cfg_irq_chann; qidx++) {
+		eq = phba->sli4_hba.hba_eq_hdl[qidx].eq;
+		if (!eq)
+			continue;
+		eq->q_mode = usdelay;
+		eq_delay->u.request.eq[cnt].eq_id = eq->queue_id;
+		eq_delay->u.request.eq[cnt].phase = 0;
+		eq_delay->u.request.eq[cnt].delay_multi = dmult;
+
+		if (++cnt >= numq)
+			break;
+	}
+	eq_delay->u.request.num_eq = cnt;
+
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	mbox->ctx_ndlp = NULL;
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *) &eq_delay->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2512 MODIFY_EQ_DELAY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+	}
+	mempool_free(mbox, phba->mbox_mem_pool);
+	return;
+}
+
+/**
+ * lpfc_eq_create - Create an Event Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @eq: The queue structure to use to create the event queue.
+ * @imax: The maximum interrupt per second limit.
+ *
+ * This function creates an event queue, as detailed in @eq, on a port,
+ * described by @phba by sending an EQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @eq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. This
+ * function will send the EQ_CREATE mailbox command to the HBA to setup the
+ * event queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return -ENOMEM. If the queue create mailbox command
+ * fails this function will return -ENXIO.
+ **/
+int
+lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint32_t imax)
+{
+	struct lpfc_mbx_eq_create *eq_create;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	struct lpfc_dmabuf *dmabuf;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint16_t dmult;
+	uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz;
+
+	/* sanity check on queue memory */
+	if (!eq)
+		return -ENODEV;
+	if (!phba->sli4_hba.pc_sli4_params.supported)
+		hw_page_size = SLI4_PAGE_SIZE;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_eq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_EQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	eq_create = &mbox->u.mqe.un.eq_create;
+	shdr = (union lpfc_sli4_cfg_shdr *) &eq_create->header.cfg_shdr;
+	bf_set(lpfc_mbx_eq_create_num_pages, &eq_create->u.request,
+	       eq->page_count);
+	bf_set(lpfc_eq_context_size, &eq_create->u.request.context,
+	       LPFC_EQE_SIZE);
+	bf_set(lpfc_eq_context_valid, &eq_create->u.request.context, 1);
+
+	/* Use version 2 of CREATE_EQ if eqav is set */
+	if (phba->sli4_hba.pc_sli4_params.eqav) {
+		bf_set(lpfc_mbox_hdr_version, &shdr->request,
+		       LPFC_Q_CREATE_VERSION_2);
+		bf_set(lpfc_eq_context_autovalid, &eq_create->u.request.context,
+		       phba->sli4_hba.pc_sli4_params.eqav);
+	}
+
+	/* don't setup delay multiplier using EQ_CREATE */
+	dmult = 0;
+	bf_set(lpfc_eq_context_delay_multi, &eq_create->u.request.context,
+	       dmult);
+	switch (eq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0360 Unsupported EQ count. (%d)\n",
+				eq->entry_count);
+		if (eq->entry_count < 256) {
+			status = -EINVAL;
+			goto out;
+		}
+		fallthrough;	/* otherwise default to smallest count */
+	case 256:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_256);
+		break;
+	case 512:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_512);
+		break;
+	case 1024:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_1024);
+		break;
+	case 2048:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_2048);
+		break;
+	case 4096:
+		bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+		       LPFC_EQ_CNT_4096);
+		break;
+	}
+	list_for_each_entry(dmabuf, &eq->page_list, list) {
+		memset(dmabuf->virt, 0, hw_page_size);
+		eq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		eq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	mbox->ctx_buf = NULL;
+	mbox->ctx_ndlp = NULL;
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2500 EQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	eq->type = LPFC_EQ;
+	eq->subtype = LPFC_NONE;
+	eq->queue_id = bf_get(lpfc_mbx_eq_create_q_id, &eq_create->u.response);
+	if (eq->queue_id == 0xFFFF)
+		status = -ENXIO;
+	eq->host_index = 0;
+	eq->notify_interval = LPFC_EQ_NOTIFY_INTRVL;
+	eq->max_proc_limit = LPFC_EQ_MAX_PROC_LIMIT;
+out:
+	mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+static int lpfc_cq_poll_hdler(struct irq_poll *iop, int budget)
+{
+	struct lpfc_queue *cq = container_of(iop, struct lpfc_queue, iop);
+
+	__lpfc_sli4_hba_process_cq(cq, LPFC_IRQ_POLL);
+
+	return 1;
+}
+
+/**
+ * lpfc_cq_create - Create a Completion Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @cq: The queue structure to use to create the completion queue.
+ * @eq: The event queue to bind this completion queue to.
+ * @type: Type of queue (EQ, GCQ, MCQ, WCQ, etc).
+ * @subtype: Functional purpose of the queue (MBOX, IO, ELS, NVMET, etc).
+ *
+ * This function creates a completion queue, as detailed in @wq, on a port,
+ * described by @phba by sending a CQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @cq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. The @eq
+ * is used to indicate which event queue to bind this completion queue to. This
+ * function will send the CQ_CREATE mailbox command to the HBA to setup the
+ * completion queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return -ENOMEM. If the queue create mailbox command
+ * fails this function will return -ENXIO.
+ **/
+int
+lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
+	       struct lpfc_queue *eq, uint32_t type, uint32_t subtype)
+{
+	struct lpfc_mbx_cq_create *cq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* sanity check on queue memory */
+	if (!cq || !eq)
+		return -ENODEV;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_cq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_CQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	cq_create = &mbox->u.mqe.un.cq_create;
+	shdr = (union lpfc_sli4_cfg_shdr *) &cq_create->header.cfg_shdr;
+	bf_set(lpfc_mbx_cq_create_num_pages, &cq_create->u.request,
+		    cq->page_count);
+	bf_set(lpfc_cq_context_event, &cq_create->u.request.context, 1);
+	bf_set(lpfc_cq_context_valid, &cq_create->u.request.context, 1);
+	bf_set(lpfc_mbox_hdr_version, &shdr->request,
+	       phba->sli4_hba.pc_sli4_params.cqv);
+	if (phba->sli4_hba.pc_sli4_params.cqv == LPFC_Q_CREATE_VERSION_2) {
+		bf_set(lpfc_mbx_cq_create_page_size, &cq_create->u.request,
+		       (cq->page_size / SLI4_PAGE_SIZE));
+		bf_set(lpfc_cq_eq_id_2, &cq_create->u.request.context,
+		       eq->queue_id);
+		bf_set(lpfc_cq_context_autovalid, &cq_create->u.request.context,
+		       phba->sli4_hba.pc_sli4_params.cqav);
+	} else {
+		bf_set(lpfc_cq_eq_id, &cq_create->u.request.context,
+		       eq->queue_id);
+	}
+	switch (cq->entry_count) {
+	case 2048:
+	case 4096:
+		if (phba->sli4_hba.pc_sli4_params.cqv ==
+		    LPFC_Q_CREATE_VERSION_2) {
+			cq_create->u.request.context.lpfc_cq_context_count =
+				cq->entry_count;
+			bf_set(lpfc_cq_context_count,
+			       &cq_create->u.request.context,
+			       LPFC_CQ_CNT_WORD7);
+			break;
+		}
+		fallthrough;
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0361 Unsupported CQ count: "
+				"entry cnt %d sz %d pg cnt %d\n",
+				cq->entry_count, cq->entry_size,
+				cq->page_count);
+		if (cq->entry_count < 256) {
+			status = -EINVAL;
+			goto out;
+		}
+		fallthrough;	/* otherwise default to smallest count */
+	case 256:
+		bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+		       LPFC_CQ_CNT_256);
+		break;
+	case 512:
+		bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+		       LPFC_CQ_CNT_512);
+		break;
+	case 1024:
+		bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+		       LPFC_CQ_CNT_1024);
+		break;
+	}
+	list_for_each_entry(dmabuf, &cq->page_list, list) {
+		memset(dmabuf->virt, 0, cq->page_size);
+		cq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		cq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2501 CQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	cq->queue_id = bf_get(lpfc_mbx_cq_create_q_id, &cq_create->u.response);
+	if (cq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	/* link the cq onto the parent eq child list */
+	list_add_tail(&cq->list, &eq->child_list);
+	/* Set up completion queue's type and subtype */
+	cq->type = type;
+	cq->subtype = subtype;
+	cq->queue_id = bf_get(lpfc_mbx_cq_create_q_id, &cq_create->u.response);
+	cq->assoc_qid = eq->queue_id;
+	cq->assoc_qp = eq;
+	cq->host_index = 0;
+	cq->notify_interval = LPFC_CQ_NOTIFY_INTRVL;
+	cq->max_proc_limit = min(phba->cfg_cq_max_proc_limit, cq->entry_count);
+
+	if (cq->queue_id > phba->sli4_hba.cq_max)
+		phba->sli4_hba.cq_max = cq->queue_id;
+
+	irq_poll_init(&cq->iop, LPFC_IRQ_POLL_WEIGHT, lpfc_cq_poll_hdler);
+out:
+	mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_cq_create_set - Create a set of Completion Queues on the HBA for MRQ
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @cqp: The queue structure array to use to create the completion queues.
+ * @hdwq: The hardware queue array  with the EQ to bind completion queues to.
+ * @type: Type of queue (EQ, GCQ, MCQ, WCQ, etc).
+ * @subtype: Functional purpose of the queue (MBOX, IO, ELS, NVMET, etc).
+ *
+ * This function creates a set of  completion queue, s to support MRQ
+ * as detailed in @cqp, on a port,
+ * described by @phba by sending a CREATE_CQ_SET mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @cq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. The @eq
+ * is used to indicate which event queue to bind this completion queue to. This
+ * function will send the CREATE_CQ_SET mailbox command to the HBA to setup the
+ * completion queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return -ENOMEM. If the queue create mailbox command
+ * fails this function will return -ENXIO.
+ **/
+int
+lpfc_cq_create_set(struct lpfc_hba *phba, struct lpfc_queue **cqp,
+		   struct lpfc_sli4_hdw_queue *hdwq, uint32_t type,
+		   uint32_t subtype)
+{
+	struct lpfc_queue *cq;
+	struct lpfc_queue *eq;
+	struct lpfc_mbx_cq_create_set *cq_set;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, alloclen, status = 0;
+	int cnt, idx, numcq, page_idx = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz;
+
+	/* sanity check on queue memory */
+	numcq = phba->cfg_nvmet_mrq;
+	if (!cqp || !hdwq || !numcq)
+		return -ENODEV;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	length = sizeof(struct lpfc_mbx_cq_create_set);
+	length += ((numcq * cqp[0]->page_count) *
+		   sizeof(struct dma_address));
+	alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			LPFC_MBOX_OPCODE_FCOE_CQ_CREATE_SET, length,
+			LPFC_SLI4_MBX_NEMBED);
+	if (alloclen < length) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"3098 Allocated DMA memory size (%d) is "
+				"less than the requested DMA memory size "
+				"(%d)\n", alloclen, length);
+		status = -ENOMEM;
+		goto out;
+	}
+	cq_set = mbox->sge_array->addr[0];
+	shdr = (union lpfc_sli4_cfg_shdr *)&cq_set->cfg_shdr;
+	bf_set(lpfc_mbox_hdr_version, &shdr->request, 0);
+
+	for (idx = 0; idx < numcq; idx++) {
+		cq = cqp[idx];
+		eq = hdwq[idx].hba_eq;
+		if (!cq || !eq) {
+			status = -ENOMEM;
+			goto out;
+		}
+		if (!phba->sli4_hba.pc_sli4_params.supported)
+			hw_page_size = cq->page_size;
+
+		switch (idx) {
+		case 0:
+			bf_set(lpfc_mbx_cq_create_set_page_size,
+			       &cq_set->u.request,
+			       (hw_page_size / SLI4_PAGE_SIZE));
+			bf_set(lpfc_mbx_cq_create_set_num_pages,
+			       &cq_set->u.request, cq->page_count);
+			bf_set(lpfc_mbx_cq_create_set_evt,
+			       &cq_set->u.request, 1);
+			bf_set(lpfc_mbx_cq_create_set_valid,
+			       &cq_set->u.request, 1);
+			bf_set(lpfc_mbx_cq_create_set_cqe_size,
+			       &cq_set->u.request, 0);
+			bf_set(lpfc_mbx_cq_create_set_num_cq,
+			       &cq_set->u.request, numcq);
+			bf_set(lpfc_mbx_cq_create_set_autovalid,
+			       &cq_set->u.request,
+			       phba->sli4_hba.pc_sli4_params.cqav);
+			switch (cq->entry_count) {
+			case 2048:
+			case 4096:
+				if (phba->sli4_hba.pc_sli4_params.cqv ==
+				    LPFC_Q_CREATE_VERSION_2) {
+					bf_set(lpfc_mbx_cq_create_set_cqe_cnt,
+					       &cq_set->u.request,
+						cq->entry_count);
+					bf_set(lpfc_mbx_cq_create_set_cqe_cnt,
+					       &cq_set->u.request,
+					       LPFC_CQ_CNT_WORD7);
+					break;
+				}
+				fallthrough;
+			default:
+				lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+						"3118 Bad CQ count. (%d)\n",
+						cq->entry_count);
+				if (cq->entry_count < 256) {
+					status = -EINVAL;
+					goto out;
+				}
+				fallthrough;	/* otherwise default to smallest */
+			case 256:
+				bf_set(lpfc_mbx_cq_create_set_cqe_cnt,
+				       &cq_set->u.request, LPFC_CQ_CNT_256);
+				break;
+			case 512:
+				bf_set(lpfc_mbx_cq_create_set_cqe_cnt,
+				       &cq_set->u.request, LPFC_CQ_CNT_512);
+				break;
+			case 1024:
+				bf_set(lpfc_mbx_cq_create_set_cqe_cnt,
+				       &cq_set->u.request, LPFC_CQ_CNT_1024);
+				break;
+			}
+			bf_set(lpfc_mbx_cq_create_set_eq_id0,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 1:
+			bf_set(lpfc_mbx_cq_create_set_eq_id1,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 2:
+			bf_set(lpfc_mbx_cq_create_set_eq_id2,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 3:
+			bf_set(lpfc_mbx_cq_create_set_eq_id3,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 4:
+			bf_set(lpfc_mbx_cq_create_set_eq_id4,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 5:
+			bf_set(lpfc_mbx_cq_create_set_eq_id5,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 6:
+			bf_set(lpfc_mbx_cq_create_set_eq_id6,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 7:
+			bf_set(lpfc_mbx_cq_create_set_eq_id7,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 8:
+			bf_set(lpfc_mbx_cq_create_set_eq_id8,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 9:
+			bf_set(lpfc_mbx_cq_create_set_eq_id9,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 10:
+			bf_set(lpfc_mbx_cq_create_set_eq_id10,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 11:
+			bf_set(lpfc_mbx_cq_create_set_eq_id11,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 12:
+			bf_set(lpfc_mbx_cq_create_set_eq_id12,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 13:
+			bf_set(lpfc_mbx_cq_create_set_eq_id13,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 14:
+			bf_set(lpfc_mbx_cq_create_set_eq_id14,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		case 15:
+			bf_set(lpfc_mbx_cq_create_set_eq_id15,
+			       &cq_set->u.request, eq->queue_id);
+			break;
+		}
+
+		/* link the cq onto the parent eq child list */
+		list_add_tail(&cq->list, &eq->child_list);
+		/* Set up completion queue's type and subtype */
+		cq->type = type;
+		cq->subtype = subtype;
+		cq->assoc_qid = eq->queue_id;
+		cq->assoc_qp = eq;
+		cq->host_index = 0;
+		cq->notify_interval = LPFC_CQ_NOTIFY_INTRVL;
+		cq->max_proc_limit = min(phba->cfg_cq_max_proc_limit,
+					 cq->entry_count);
+		cq->chann = idx;
+
+		rc = 0;
+		list_for_each_entry(dmabuf, &cq->page_list, list) {
+			memset(dmabuf->virt, 0, hw_page_size);
+			cnt = page_idx + dmabuf->buffer_tag;
+			cq_set->u.request.page[cnt].addr_lo =
+					putPaddrLow(dmabuf->phys);
+			cq_set->u.request.page[cnt].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+			rc++;
+		}
+		page_idx += rc;
+	}
+
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"3119 CQ_CREATE_SET mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	rc = bf_get(lpfc_mbx_cq_create_set_base_id, &cq_set->u.response);
+	if (rc == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+
+	for (idx = 0; idx < numcq; idx++) {
+		cq = cqp[idx];
+		cq->queue_id = rc + idx;
+		if (cq->queue_id > phba->sli4_hba.cq_max)
+			phba->sli4_hba.cq_max = cq->queue_id;
+	}
+
+out:
+	lpfc_sli4_mbox_cmd_free(phba, mbox);
+	return status;
+}
+
+/**
+ * lpfc_mq_create_fb_init - Send MCC_CREATE without async events registration
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @mq: The queue structure to use to create the mailbox queue.
+ * @mbox: An allocated pointer to type LPFC_MBOXQ_t
+ * @cq: The completion queue to associate with this cq.
+ *
+ * This function provides failback (fb) functionality when the
+ * mq_create_ext fails on older FW generations.  It's purpose is identical
+ * to mq_create_ext otherwise.
+ *
+ * This routine cannot fail as all attributes were previously accessed and
+ * initialized in mq_create_ext.
+ **/
+static void
+lpfc_mq_create_fb_init(struct lpfc_hba *phba, struct lpfc_queue *mq,
+		       LPFC_MBOXQ_t *mbox, struct lpfc_queue *cq)
+{
+	struct lpfc_mbx_mq_create *mq_create;
+	struct lpfc_dmabuf *dmabuf;
+	int length;
+
+	length = (sizeof(struct lpfc_mbx_mq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_MQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	mq_create = &mbox->u.mqe.un.mq_create;
+	bf_set(lpfc_mbx_mq_create_num_pages, &mq_create->u.request,
+	       mq->page_count);
+	bf_set(lpfc_mq_context_cq_id, &mq_create->u.request.context,
+	       cq->queue_id);
+	bf_set(lpfc_mq_context_valid, &mq_create->u.request.context, 1);
+	switch (mq->entry_count) {
+	case 16:
+		bf_set(lpfc_mq_context_ring_size, &mq_create->u.request.context,
+		       LPFC_MQ_RING_SIZE_16);
+		break;
+	case 32:
+		bf_set(lpfc_mq_context_ring_size, &mq_create->u.request.context,
+		       LPFC_MQ_RING_SIZE_32);
+		break;
+	case 64:
+		bf_set(lpfc_mq_context_ring_size, &mq_create->u.request.context,
+		       LPFC_MQ_RING_SIZE_64);
+		break;
+	case 128:
+		bf_set(lpfc_mq_context_ring_size, &mq_create->u.request.context,
+		       LPFC_MQ_RING_SIZE_128);
+		break;
+	}
+	list_for_each_entry(dmabuf, &mq->page_list, list) {
+		mq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+			putPaddrLow(dmabuf->phys);
+		mq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+			putPaddrHigh(dmabuf->phys);
+	}
+}
+
+/**
+ * lpfc_mq_create - Create a mailbox Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @mq: The queue structure to use to create the mailbox queue.
+ * @cq: The completion queue to associate with this cq.
+ * @subtype: The queue's subtype.
+ *
+ * This function creates a mailbox queue, as detailed in @mq, on a port,
+ * described by @phba by sending a MQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @cq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. This
+ * function will send the MQ_CREATE mailbox command to the HBA to setup the
+ * mailbox queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return -ENOMEM. If the queue create mailbox command
+ * fails this function will return -ENXIO.
+ **/
+int32_t
+lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
+	       struct lpfc_queue *cq, uint32_t subtype)
+{
+	struct lpfc_mbx_mq_create *mq_create;
+	struct lpfc_mbx_mq_create_ext *mq_create_ext;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz;
+
+	/* sanity check on queue memory */
+	if (!mq || !cq)
+		return -ENODEV;
+	if (!phba->sli4_hba.pc_sli4_params.supported)
+		hw_page_size = SLI4_PAGE_SIZE;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_mq_create_ext) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_MQ_CREATE_EXT,
+			 length, LPFC_SLI4_MBX_EMBED);
+
+	mq_create_ext = &mbox->u.mqe.un.mq_create_ext;
+	shdr = (union lpfc_sli4_cfg_shdr *) &mq_create_ext->header.cfg_shdr;
+	bf_set(lpfc_mbx_mq_create_ext_num_pages,
+	       &mq_create_ext->u.request, mq->page_count);
+	bf_set(lpfc_mbx_mq_create_ext_async_evt_link,
+	       &mq_create_ext->u.request, 1);
+	bf_set(lpfc_mbx_mq_create_ext_async_evt_fip,
+	       &mq_create_ext->u.request, 1);
+	bf_set(lpfc_mbx_mq_create_ext_async_evt_group5,
+	       &mq_create_ext->u.request, 1);
+	bf_set(lpfc_mbx_mq_create_ext_async_evt_fc,
+	       &mq_create_ext->u.request, 1);
+	bf_set(lpfc_mbx_mq_create_ext_async_evt_sli,
+	       &mq_create_ext->u.request, 1);
+	bf_set(lpfc_mq_context_valid, &mq_create_ext->u.request.context, 1);
+	bf_set(lpfc_mbox_hdr_version, &shdr->request,
+	       phba->sli4_hba.pc_sli4_params.mqv);
+	if (phba->sli4_hba.pc_sli4_params.mqv == LPFC_Q_CREATE_VERSION_1)
+		bf_set(lpfc_mbx_mq_create_ext_cq_id, &mq_create_ext->u.request,
+		       cq->queue_id);
+	else
+		bf_set(lpfc_mq_context_cq_id, &mq_create_ext->u.request.context,
+		       cq->queue_id);
+	switch (mq->entry_count) {
+	default:
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0362 Unsupported MQ count. (%d)\n",
+				mq->entry_count);
+		if (mq->entry_count < 16) {
+			status = -EINVAL;
+			goto out;
+		}
+		fallthrough;	/* otherwise default to smallest count */
+	case 16:
+		bf_set(lpfc_mq_context_ring_size,
+		       &mq_create_ext->u.request.context,
+		       LPFC_MQ_RING_SIZE_16);
+		break;
+	case 32:
+		bf_set(lpfc_mq_context_ring_size,
+		       &mq_create_ext->u.request.context,
+		       LPFC_MQ_RING_SIZE_32);
+		break;
+	case 64:
+		bf_set(lpfc_mq_context_ring_size,
+		       &mq_create_ext->u.request.context,
+		       LPFC_MQ_RING_SIZE_64);
+		break;
+	case 128:
+		bf_set(lpfc_mq_context_ring_size,
+		       &mq_create_ext->u.request.context,
+		       LPFC_MQ_RING_SIZE_128);
+		break;
+	}
+	list_for_each_entry(dmabuf, &mq->page_list, list) {
+		memset(dmabuf->virt, 0, hw_page_size);
+		mq_create_ext->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		mq_create_ext->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	mq->queue_id = bf_get(lpfc_mbx_mq_create_q_id,
+			      &mq_create_ext->u.response);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"2795 MQ_CREATE_EXT failed with "
+				"status x%x. Failback to MQ_CREATE.\n",
+				rc);
+		lpfc_mq_create_fb_init(phba, mq, mbox, cq);
+		mq_create = &mbox->u.mqe.un.mq_create;
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+		shdr = (union lpfc_sli4_cfg_shdr *) &mq_create->header.cfg_shdr;
+		mq->queue_id = bf_get(lpfc_mbx_mq_create_q_id,
+				      &mq_create->u.response);
+	}
+
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2502 MQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	if (mq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	mq->type = LPFC_MQ;
+	mq->assoc_qid = cq->queue_id;
+	mq->subtype = subtype;
+	mq->host_index = 0;
+	mq->hba_index = 0;
+
+	/* link the mq onto the parent cq child list */
+	list_add_tail(&mq->list, &cq->child_list);
+out:
+	mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_wq_create - Create a Work Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @wq: The queue structure to use to create the work queue.
+ * @cq: The completion queue to bind this work queue to.
+ * @subtype: The subtype of the work queue indicating its functionality.
+ *
+ * This function creates a work queue, as detailed in @wq, on a port, described
+ * by @phba by sending a WQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @wq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. The @cq
+ * is used to indicate which completion queue to bind this work queue to. This
+ * function will send the WQ_CREATE mailbox command to the HBA to setup the
+ * work queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return -ENOMEM. If the queue create mailbox command
+ * fails this function will return -ENXIO.
+ **/
+int
+lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
+	       struct lpfc_queue *cq, uint32_t subtype)
+{
+	struct lpfc_mbx_wq_create *wq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz;
+	struct dma_address *page;
+	void __iomem *bar_memmap_p;
+	uint32_t db_offset;
+	uint16_t pci_barset;
+	uint8_t dpp_barset;
+	uint32_t dpp_offset;
+	uint8_t wq_create_version;
+#ifdef CONFIG_X86
+	unsigned long pg_addr;
+#endif
+
+	/* sanity check on queue memory */
+	if (!wq || !cq)
+		return -ENODEV;
+	if (!phba->sli4_hba.pc_sli4_params.supported)
+		hw_page_size = wq->page_size;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_wq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_WQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	wq_create = &mbox->u.mqe.un.wq_create;
+	shdr = (union lpfc_sli4_cfg_shdr *) &wq_create->header.cfg_shdr;
+	bf_set(lpfc_mbx_wq_create_num_pages, &wq_create->u.request,
+		    wq->page_count);
+	bf_set(lpfc_mbx_wq_create_cq_id, &wq_create->u.request,
+		    cq->queue_id);
+
+	/* wqv is the earliest version supported, NOT the latest */
+	bf_set(lpfc_mbox_hdr_version, &shdr->request,
+	       phba->sli4_hba.pc_sli4_params.wqv);
+
+	if ((phba->sli4_hba.pc_sli4_params.wqsize & LPFC_WQ_SZ128_SUPPORT) ||
+	    (wq->page_size > SLI4_PAGE_SIZE))
+		wq_create_version = LPFC_Q_CREATE_VERSION_1;
+	else
+		wq_create_version = LPFC_Q_CREATE_VERSION_0;
+
+	switch (wq_create_version) {
+	case LPFC_Q_CREATE_VERSION_1:
+		bf_set(lpfc_mbx_wq_create_wqe_count, &wq_create->u.request_1,
+		       wq->entry_count);
+		bf_set(lpfc_mbox_hdr_version, &shdr->request,
+		       LPFC_Q_CREATE_VERSION_1);
+
+		switch (wq->entry_size) {
+		default:
+		case 64:
+			bf_set(lpfc_mbx_wq_create_wqe_size,
+			       &wq_create->u.request_1,
+			       LPFC_WQ_WQE_SIZE_64);
+			break;
+		case 128:
+			bf_set(lpfc_mbx_wq_create_wqe_size,
+			       &wq_create->u.request_1,
+			       LPFC_WQ_WQE_SIZE_128);
+			break;
+		}
+		/* Request DPP by default */
+		bf_set(lpfc_mbx_wq_create_dpp_req, &wq_create->u.request_1, 1);
+		bf_set(lpfc_mbx_wq_create_page_size,
+		       &wq_create->u.request_1,
+		       (wq->page_size / SLI4_PAGE_SIZE));
+		page = wq_create->u.request_1.page;
+		break;
+	default:
+		page = wq_create->u.request.page;
+		break;
+	}
+
+	list_for_each_entry(dmabuf, &wq->page_list, list) {
+		memset(dmabuf->virt, 0, hw_page_size);
+		page[dmabuf->buffer_tag].addr_lo = putPaddrLow(dmabuf->phys);
+		page[dmabuf->buffer_tag].addr_hi = putPaddrHigh(dmabuf->phys);
+	}
+
+	if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE)
+		bf_set(lpfc_mbx_wq_create_dua, &wq_create->u.request, 1);
+
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2503 WQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+
+	if (wq_create_version == LPFC_Q_CREATE_VERSION_0)
+		wq->queue_id = bf_get(lpfc_mbx_wq_create_q_id,
+					&wq_create->u.response);
+	else
+		wq->queue_id = bf_get(lpfc_mbx_wq_create_v1_q_id,
+					&wq_create->u.response_1);
+
+	if (wq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+
+	wq->db_format = LPFC_DB_LIST_FORMAT;
+	if (wq_create_version == LPFC_Q_CREATE_VERSION_0) {
+		if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE) {
+			wq->db_format = bf_get(lpfc_mbx_wq_create_db_format,
+					       &wq_create->u.response);
+			if ((wq->db_format != LPFC_DB_LIST_FORMAT) &&
+			    (wq->db_format != LPFC_DB_RING_FORMAT)) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+						"3265 WQ[%d] doorbell format "
+						"not supported: x%x\n",
+						wq->queue_id, wq->db_format);
+				status = -EINVAL;
+				goto out;
+			}
+			pci_barset = bf_get(lpfc_mbx_wq_create_bar_set,
+					    &wq_create->u.response);
+			bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba,
+								   pci_barset);
+			if (!bar_memmap_p) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+						"3263 WQ[%d] failed to memmap "
+						"pci barset:x%x\n",
+						wq->queue_id, pci_barset);
+				status = -ENOMEM;
+				goto out;
+			}
+			db_offset = wq_create->u.response.doorbell_offset;
+			if ((db_offset != LPFC_ULP0_WQ_DOORBELL) &&
+			    (db_offset != LPFC_ULP1_WQ_DOORBELL)) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+						"3252 WQ[%d] doorbell offset "
+						"not supported: x%x\n",
+						wq->queue_id, db_offset);
+				status = -EINVAL;
+				goto out;
+			}
+			wq->db_regaddr = bar_memmap_p + db_offset;
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"3264 WQ[%d]: barset:x%x, offset:x%x, "
+					"format:x%x\n", wq->queue_id,
+					pci_barset, db_offset, wq->db_format);
+		} else
+			wq->db_regaddr = phba->sli4_hba.WQDBregaddr;
+	} else {
+		/* Check if DPP was honored by the firmware */
+		wq->dpp_enable = bf_get(lpfc_mbx_wq_create_dpp_rsp,
+				    &wq_create->u.response_1);
+		if (wq->dpp_enable) {
+			pci_barset = bf_get(lpfc_mbx_wq_create_v1_bar_set,
+					    &wq_create->u.response_1);
+			bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba,
+								   pci_barset);
+			if (!bar_memmap_p) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+						"3267 WQ[%d] failed to memmap "
+						"pci barset:x%x\n",
+						wq->queue_id, pci_barset);
+				status = -ENOMEM;
+				goto out;
+			}
+			db_offset = wq_create->u.response_1.doorbell_offset;
+			wq->db_regaddr = bar_memmap_p + db_offset;
+			wq->dpp_id = bf_get(lpfc_mbx_wq_create_dpp_id,
+					    &wq_create->u.response_1);
+			dpp_barset = bf_get(lpfc_mbx_wq_create_dpp_bar,
+					    &wq_create->u.response_1);
+			bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba,
+								   dpp_barset);
+			if (!bar_memmap_p) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+						"3268 WQ[%d] failed to memmap "
+						"pci barset:x%x\n",
+						wq->queue_id, dpp_barset);
+				status = -ENOMEM;
+				goto out;
+			}
+			dpp_offset = wq_create->u.response_1.dpp_offset;
+			wq->dpp_regaddr = bar_memmap_p + dpp_offset;
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"3271 WQ[%d]: barset:x%x, offset:x%x, "
+					"dpp_id:x%x dpp_barset:x%x "
+					"dpp_offset:x%x\n",
+					wq->queue_id, pci_barset, db_offset,
+					wq->dpp_id, dpp_barset, dpp_offset);
+
+#ifdef CONFIG_X86
+			/* Enable combined writes for DPP aperture */
+			pg_addr = (unsigned long)(wq->dpp_regaddr) & PAGE_MASK;
+			rc = set_memory_wc(pg_addr, 1);
+			if (rc) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"3272 Cannot setup Combined "
+					"Write on WQ[%d] - disable DPP\n",
+					wq->queue_id);
+				phba->cfg_enable_dpp = 0;
+			}
+#else
+			phba->cfg_enable_dpp = 0;
+#endif
+		} else
+			wq->db_regaddr = phba->sli4_hba.WQDBregaddr;
+	}
+	wq->pring = kzalloc(sizeof(struct lpfc_sli_ring), GFP_KERNEL);
+	if (wq->pring == NULL) {
+		status = -ENOMEM;
+		goto out;
+	}
+	wq->type = LPFC_WQ;
+	wq->assoc_qid = cq->queue_id;
+	wq->subtype = subtype;
+	wq->host_index = 0;
+	wq->hba_index = 0;
+	wq->notify_interval = LPFC_WQ_NOTIFY_INTRVL;
+
+	/* link the wq onto the parent cq child list */
+	list_add_tail(&wq->list, &cq->child_list);
+out:
+	mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_rq_create - Create a Receive Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @hrq: The queue structure to use to create the header receive queue.
+ * @drq: The queue structure to use to create the data receive queue.
+ * @cq: The completion queue to bind this work queue to.
+ * @subtype: The subtype of the work queue indicating its functionality.
+ *
+ * This function creates a receive buffer queue pair , as detailed in @hrq and
+ * @drq, on a port, described by @phba by sending a RQ_CREATE mailbox command
+ * to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @drq and @hrq
+ * struct is used to get the entry count that is necessary to determine the
+ * number of pages to use for this queue. The @cq is used to indicate which
+ * completion queue to bind received buffers that are posted to these queues to.
+ * This function will send the RQ_CREATE mailbox command to the HBA to setup the
+ * receive queue pair. This function is asynchronous and will wait for the
+ * mailbox command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return -ENOMEM. If the queue create mailbox command
+ * fails this function will return -ENXIO.
+ **/
+int
+lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+	       struct lpfc_queue *drq, struct lpfc_queue *cq, uint32_t subtype)
+{
+	struct lpfc_mbx_rq_create *rq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz;
+	void __iomem *bar_memmap_p;
+	uint32_t db_offset;
+	uint16_t pci_barset;
+
+	/* sanity check on queue memory */
+	if (!hrq || !drq || !cq)
+		return -ENODEV;
+	if (!phba->sli4_hba.pc_sli4_params.supported)
+		hw_page_size = SLI4_PAGE_SIZE;
+
+	if (hrq->entry_count != drq->entry_count)
+		return -EINVAL;
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_rq_create) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_RQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	rq_create = &mbox->u.mqe.un.rq_create;
+	shdr = (union lpfc_sli4_cfg_shdr *) &rq_create->header.cfg_shdr;
+	bf_set(lpfc_mbox_hdr_version, &shdr->request,
+	       phba->sli4_hba.pc_sli4_params.rqv);
+	if (phba->sli4_hba.pc_sli4_params.rqv == LPFC_Q_CREATE_VERSION_1) {
+		bf_set(lpfc_rq_context_rqe_count_1,
+		       &rq_create->u.request.context,
+		       hrq->entry_count);
+		rq_create->u.request.context.buffer_size = LPFC_HDR_BUF_SIZE;
+		bf_set(lpfc_rq_context_rqe_size,
+		       &rq_create->u.request.context,
+		       LPFC_RQE_SIZE_8);
+		bf_set(lpfc_rq_context_page_size,
+		       &rq_create->u.request.context,
+		       LPFC_RQ_PAGE_SIZE_4096);
+	} else {
+		switch (hrq->entry_count) {
+		default:
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"2535 Unsupported RQ count. (%d)\n",
+					hrq->entry_count);
+			if (hrq->entry_count < 512) {
+				status = -EINVAL;
+				goto out;
+			}
+			fallthrough;	/* otherwise default to smallest count */
+		case 512:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_512);
+			break;
+		case 1024:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_1024);
+			break;
+		case 2048:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_2048);
+			break;
+		case 4096:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_4096);
+			break;
+		}
+		bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
+		       LPFC_HDR_BUF_SIZE);
+	}
+	bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
+	       cq->queue_id);
+	bf_set(lpfc_mbx_rq_create_num_pages, &rq_create->u.request,
+	       hrq->page_count);
+	list_for_each_entry(dmabuf, &hrq->page_list, list) {
+		memset(dmabuf->virt, 0, hw_page_size);
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE)
+		bf_set(lpfc_mbx_rq_create_dua, &rq_create->u.request, 1);
+
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2504 RQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	hrq->queue_id = bf_get(lpfc_mbx_rq_create_q_id, &rq_create->u.response);
+	if (hrq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+
+	if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE) {
+		hrq->db_format = bf_get(lpfc_mbx_rq_create_db_format,
+					&rq_create->u.response);
+		if ((hrq->db_format != LPFC_DB_LIST_FORMAT) &&
+		    (hrq->db_format != LPFC_DB_RING_FORMAT)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"3262 RQ [%d] doorbell format not "
+					"supported: x%x\n", hrq->queue_id,
+					hrq->db_format);
+			status = -EINVAL;
+			goto out;
+		}
+
+		pci_barset = bf_get(lpfc_mbx_rq_create_bar_set,
+				    &rq_create->u.response);
+		bar_memmap_p = lpfc_dual_chute_pci_bar_map(phba, pci_barset);
+		if (!bar_memmap_p) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"3269 RQ[%d] failed to memmap pci "
+					"barset:x%x\n", hrq->queue_id,
+					pci_barset);
+			status = -ENOMEM;
+			goto out;
+		}
+
+		db_offset = rq_create->u.response.doorbell_offset;
+		if ((db_offset != LPFC_ULP0_RQ_DOORBELL) &&
+		    (db_offset != LPFC_ULP1_RQ_DOORBELL)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"3270 RQ[%d] doorbell offset not "
+					"supported: x%x\n", hrq->queue_id,
+					db_offset);
+			status = -EINVAL;
+			goto out;
+		}
+		hrq->db_regaddr = bar_memmap_p + db_offset;
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+				"3266 RQ[qid:%d]: barset:x%x, offset:x%x, "
+				"format:x%x\n", hrq->queue_id, pci_barset,
+				db_offset, hrq->db_format);
+	} else {
+		hrq->db_format = LPFC_DB_RING_FORMAT;
+		hrq->db_regaddr = phba->sli4_hba.RQDBregaddr;
+	}
+	hrq->type = LPFC_HRQ;
+	hrq->assoc_qid = cq->queue_id;
+	hrq->subtype = subtype;
+	hrq->host_index = 0;
+	hrq->hba_index = 0;
+	hrq->notify_interval = LPFC_RQ_NOTIFY_INTRVL;
+
+	/* now create the data queue */
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_RQ_CREATE,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbox_hdr_version, &shdr->request,
+	       phba->sli4_hba.pc_sli4_params.rqv);
+	if (phba->sli4_hba.pc_sli4_params.rqv == LPFC_Q_CREATE_VERSION_1) {
+		bf_set(lpfc_rq_context_rqe_count_1,
+		       &rq_create->u.request.context, hrq->entry_count);
+		if (subtype == LPFC_NVMET)
+			rq_create->u.request.context.buffer_size =
+				LPFC_NVMET_DATA_BUF_SIZE;
+		else
+			rq_create->u.request.context.buffer_size =
+				LPFC_DATA_BUF_SIZE;
+		bf_set(lpfc_rq_context_rqe_size, &rq_create->u.request.context,
+		       LPFC_RQE_SIZE_8);
+		bf_set(lpfc_rq_context_page_size, &rq_create->u.request.context,
+		       (PAGE_SIZE/SLI4_PAGE_SIZE));
+	} else {
+		switch (drq->entry_count) {
+		default:
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"2536 Unsupported RQ count. (%d)\n",
+					drq->entry_count);
+			if (drq->entry_count < 512) {
+				status = -EINVAL;
+				goto out;
+			}
+			fallthrough;	/* otherwise default to smallest count */
+		case 512:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_512);
+			break;
+		case 1024:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_1024);
+			break;
+		case 2048:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_2048);
+			break;
+		case 4096:
+			bf_set(lpfc_rq_context_rqe_count,
+			       &rq_create->u.request.context,
+			       LPFC_RQ_RING_SIZE_4096);
+			break;
+		}
+		if (subtype == LPFC_NVMET)
+			bf_set(lpfc_rq_context_buf_size,
+			       &rq_create->u.request.context,
+			       LPFC_NVMET_DATA_BUF_SIZE);
+		else
+			bf_set(lpfc_rq_context_buf_size,
+			       &rq_create->u.request.context,
+			       LPFC_DATA_BUF_SIZE);
+	}
+	bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
+	       cq->queue_id);
+	bf_set(lpfc_mbx_rq_create_num_pages, &rq_create->u.request,
+	       drq->page_count);
+	list_for_each_entry(dmabuf, &drq->page_list, list) {
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+					putPaddrLow(dmabuf->phys);
+		rq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+	}
+	if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE)
+		bf_set(lpfc_mbx_rq_create_dua, &rq_create->u.request, 1);
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &rq_create->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		status = -ENXIO;
+		goto out;
+	}
+	drq->queue_id = bf_get(lpfc_mbx_rq_create_q_id, &rq_create->u.response);
+	if (drq->queue_id == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+	drq->type = LPFC_DRQ;
+	drq->assoc_qid = cq->queue_id;
+	drq->subtype = subtype;
+	drq->host_index = 0;
+	drq->hba_index = 0;
+	drq->notify_interval = LPFC_RQ_NOTIFY_INTRVL;
+
+	/* link the header and data RQs onto the parent cq child list */
+	list_add_tail(&hrq->list, &cq->child_list);
+	list_add_tail(&drq->list, &cq->child_list);
+
+out:
+	mempool_free(mbox, phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_mrq_create - Create MRQ Receive Queues on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @hrqp: The queue structure array to use to create the header receive queues.
+ * @drqp: The queue structure array to use to create the data receive queues.
+ * @cqp: The completion queue array to bind these receive queues to.
+ * @subtype: Functional purpose of the queue (MBOX, IO, ELS, NVMET, etc).
+ *
+ * This function creates a receive buffer queue pair , as detailed in @hrq and
+ * @drq, on a port, described by @phba by sending a RQ_CREATE mailbox command
+ * to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @drq and @hrq
+ * struct is used to get the entry count that is necessary to determine the
+ * number of pages to use for this queue. The @cq is used to indicate which
+ * completion queue to bind received buffers that are posted to these queues to.
+ * This function will send the RQ_CREATE mailbox command to the HBA to setup the
+ * receive queue pair. This function is asynchronous and will wait for the
+ * mailbox command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return -ENOMEM. If the queue create mailbox command
+ * fails this function will return -ENXIO.
+ **/
+int
+lpfc_mrq_create(struct lpfc_hba *phba, struct lpfc_queue **hrqp,
+		struct lpfc_queue **drqp, struct lpfc_queue **cqp,
+		uint32_t subtype)
+{
+	struct lpfc_queue *hrq, *drq, *cq;
+	struct lpfc_mbx_rq_create_v2 *rq_create;
+	struct lpfc_dmabuf *dmabuf;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, alloclen, status = 0;
+	int cnt, idx, numrq, page_idx = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint32_t hw_page_size = phba->sli4_hba.pc_sli4_params.if_page_sz;
+
+	numrq = phba->cfg_nvmet_mrq;
+	/* sanity check on array memory */
+	if (!hrqp || !drqp || !cqp || !numrq)
+		return -ENODEV;
+	if (!phba->sli4_hba.pc_sli4_params.supported)
+		hw_page_size = SLI4_PAGE_SIZE;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	length = sizeof(struct lpfc_mbx_rq_create_v2);
+	length += ((2 * numrq * hrqp[0]->page_count) *
+		   sizeof(struct dma_address));
+
+	alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+				    LPFC_MBOX_OPCODE_FCOE_RQ_CREATE, length,
+				    LPFC_SLI4_MBX_NEMBED);
+	if (alloclen < length) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"3099 Allocated DMA memory size (%d) is "
+				"less than the requested DMA memory size "
+				"(%d)\n", alloclen, length);
+		status = -ENOMEM;
+		goto out;
+	}
+
+
+
+	rq_create = mbox->sge_array->addr[0];
+	shdr = (union lpfc_sli4_cfg_shdr *)&rq_create->cfg_shdr;
+
+	bf_set(lpfc_mbox_hdr_version, &shdr->request, LPFC_Q_CREATE_VERSION_2);
+	cnt = 0;
+
+	for (idx = 0; idx < numrq; idx++) {
+		hrq = hrqp[idx];
+		drq = drqp[idx];
+		cq  = cqp[idx];
+
+		/* sanity check on queue memory */
+		if (!hrq || !drq || !cq) {
+			status = -ENODEV;
+			goto out;
+		}
+
+		if (hrq->entry_count != drq->entry_count) {
+			status = -EINVAL;
+			goto out;
+		}
+
+		if (idx == 0) {
+			bf_set(lpfc_mbx_rq_create_num_pages,
+			       &rq_create->u.request,
+			       hrq->page_count);
+			bf_set(lpfc_mbx_rq_create_rq_cnt,
+			       &rq_create->u.request, (numrq * 2));
+			bf_set(lpfc_mbx_rq_create_dnb, &rq_create->u.request,
+			       1);
+			bf_set(lpfc_rq_context_base_cq,
+			       &rq_create->u.request.context,
+			       cq->queue_id);
+			bf_set(lpfc_rq_context_data_size,
+			       &rq_create->u.request.context,
+			       LPFC_NVMET_DATA_BUF_SIZE);
+			bf_set(lpfc_rq_context_hdr_size,
+			       &rq_create->u.request.context,
+			       LPFC_HDR_BUF_SIZE);
+			bf_set(lpfc_rq_context_rqe_count_1,
+			       &rq_create->u.request.context,
+			       hrq->entry_count);
+			bf_set(lpfc_rq_context_rqe_size,
+			       &rq_create->u.request.context,
+			       LPFC_RQE_SIZE_8);
+			bf_set(lpfc_rq_context_page_size,
+			       &rq_create->u.request.context,
+			       (PAGE_SIZE/SLI4_PAGE_SIZE));
+		}
+		rc = 0;
+		list_for_each_entry(dmabuf, &hrq->page_list, list) {
+			memset(dmabuf->virt, 0, hw_page_size);
+			cnt = page_idx + dmabuf->buffer_tag;
+			rq_create->u.request.page[cnt].addr_lo =
+					putPaddrLow(dmabuf->phys);
+			rq_create->u.request.page[cnt].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+			rc++;
+		}
+		page_idx += rc;
+
+		rc = 0;
+		list_for_each_entry(dmabuf, &drq->page_list, list) {
+			memset(dmabuf->virt, 0, hw_page_size);
+			cnt = page_idx + dmabuf->buffer_tag;
+			rq_create->u.request.page[cnt].addr_lo =
+					putPaddrLow(dmabuf->phys);
+			rq_create->u.request.page[cnt].addr_hi =
+					putPaddrHigh(dmabuf->phys);
+			rc++;
+		}
+		page_idx += rc;
+
+		hrq->db_format = LPFC_DB_RING_FORMAT;
+		hrq->db_regaddr = phba->sli4_hba.RQDBregaddr;
+		hrq->type = LPFC_HRQ;
+		hrq->assoc_qid = cq->queue_id;
+		hrq->subtype = subtype;
+		hrq->host_index = 0;
+		hrq->hba_index = 0;
+		hrq->notify_interval = LPFC_RQ_NOTIFY_INTRVL;
+
+		drq->db_format = LPFC_DB_RING_FORMAT;
+		drq->db_regaddr = phba->sli4_hba.RQDBregaddr;
+		drq->type = LPFC_DRQ;
+		drq->assoc_qid = cq->queue_id;
+		drq->subtype = subtype;
+		drq->host_index = 0;
+		drq->hba_index = 0;
+		drq->notify_interval = LPFC_RQ_NOTIFY_INTRVL;
+
+		list_add_tail(&hrq->list, &cq->child_list);
+		list_add_tail(&drq->list, &cq->child_list);
+	}
+
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"3120 RQ_CREATE mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+		goto out;
+	}
+	rc = bf_get(lpfc_mbx_rq_create_q_id, &rq_create->u.response);
+	if (rc == 0xFFFF) {
+		status = -ENXIO;
+		goto out;
+	}
+
+	/* Initialize all RQs with associated queue id */
+	for (idx = 0; idx < numrq; idx++) {
+		hrq = hrqp[idx];
+		hrq->queue_id = rc + (2 * idx);
+		drq = drqp[idx];
+		drq->queue_id = rc + (2 * idx) + 1;
+	}
+
+out:
+	lpfc_sli4_mbox_cmd_free(phba, mbox);
+	return status;
+}
+
+/**
+ * lpfc_eq_destroy - Destroy an event Queue on the HBA
+ * @phba: HBA structure that indicates port to destroy a queue on.
+ * @eq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @eq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @eq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return -ENXIO.
+ **/
+int
+lpfc_eq_destroy(struct lpfc_hba *phba, struct lpfc_queue *eq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* sanity check on queue memory */
+	if (!eq)
+		return -ENODEV;
+
+	mbox = mempool_alloc(eq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_eq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_EQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_eq_destroy_q_id, &mbox->u.mqe.un.eq_destroy.u.request,
+	       eq->queue_id);
+	mbox->vport = eq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+
+	rc = lpfc_sli_issue_mbox(eq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.eq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2505 EQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+
+	/* Remove eq from any list */
+	list_del_init(&eq->list);
+	mempool_free(mbox, eq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_cq_destroy - Destroy a Completion Queue on the HBA
+ * @phba: HBA structure that indicates port to destroy a queue on.
+ * @cq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @cq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @cq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return -ENXIO.
+ **/
+int
+lpfc_cq_destroy(struct lpfc_hba *phba, struct lpfc_queue *cq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* sanity check on queue memory */
+	if (!cq)
+		return -ENODEV;
+	mbox = mempool_alloc(cq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_cq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_CQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_cq_destroy_q_id, &mbox->u.mqe.un.cq_destroy.u.request,
+	       cq->queue_id);
+	mbox->vport = cq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(cq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.wq_create.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2506 CQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	/* Remove cq from any list */
+	list_del_init(&cq->list);
+	mempool_free(mbox, cq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_mq_destroy - Destroy a Mailbox Queue on the HBA
+ * @phba: HBA structure that indicates port to destroy a queue on.
+ * @mq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @mq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @mq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return -ENXIO.
+ **/
+int
+lpfc_mq_destroy(struct lpfc_hba *phba, struct lpfc_queue *mq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* sanity check on queue memory */
+	if (!mq)
+		return -ENODEV;
+	mbox = mempool_alloc(mq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_mq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_MQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_mq_destroy_q_id, &mbox->u.mqe.un.mq_destroy.u.request,
+	       mq->queue_id);
+	mbox->vport = mq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(mq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.mq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2507 MQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	/* Remove mq from any list */
+	list_del_init(&mq->list);
+	mempool_free(mbox, mq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_wq_destroy - Destroy a Work Queue on the HBA
+ * @phba: HBA structure that indicates port to destroy a queue on.
+ * @wq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @wq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @wq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return -ENXIO.
+ **/
+int
+lpfc_wq_destroy(struct lpfc_hba *phba, struct lpfc_queue *wq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* sanity check on queue memory */
+	if (!wq)
+		return -ENODEV;
+	mbox = mempool_alloc(wq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_wq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_WQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_wq_destroy_q_id, &mbox->u.mqe.un.wq_destroy.u.request,
+	       wq->queue_id);
+	mbox->vport = wq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(wq->phba, mbox, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.wq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2508 WQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	/* Remove wq from any list */
+	list_del_init(&wq->list);
+	kfree(wq->pring);
+	wq->pring = NULL;
+	mempool_free(mbox, wq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_rq_destroy - Destroy a Receive Queue on the HBA
+ * @phba: HBA structure that indicates port to destroy a queue on.
+ * @hrq: The queue structure associated with the queue to destroy.
+ * @drq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @rq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @rq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return -ENXIO.
+ **/
+int
+lpfc_rq_destroy(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+		struct lpfc_queue *drq)
+{
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, status = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* sanity check on queue memory */
+	if (!hrq || !drq)
+		return -ENODEV;
+	mbox = mempool_alloc(hrq->phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_rq_destroy) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY,
+			 length, LPFC_SLI4_MBX_EMBED);
+	bf_set(lpfc_mbx_rq_destroy_q_id, &mbox->u.mqe.un.rq_destroy.u.request,
+	       hrq->queue_id);
+	mbox->vport = hrq->phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	rc = lpfc_sli_issue_mbox(hrq->phba, mbox, MBX_POLL);
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.rq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2509 RQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		mempool_free(mbox, hrq->phba->mbox_mem_pool);
+		return -ENXIO;
+	}
+	bf_set(lpfc_mbx_rq_destroy_q_id, &mbox->u.mqe.un.rq_destroy.u.request,
+	       drq->queue_id);
+	rc = lpfc_sli_issue_mbox(drq->phba, mbox, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *)
+		&mbox->u.mqe.un.rq_destroy.header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2510 RQ_DESTROY mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		status = -ENXIO;
+	}
+	list_del_init(&hrq->list);
+	list_del_init(&drq->list);
+	mempool_free(mbox, hrq->phba->mbox_mem_pool);
+	return status;
+}
+
+/**
+ * lpfc_sli4_post_sgl - Post scatter gather list for an XRI to HBA
+ * @phba: The virtual port for which this call being executed.
+ * @pdma_phys_addr0: Physical address of the 1st SGL page.
+ * @pdma_phys_addr1: Physical address of the 2nd SGL page.
+ * @xritag: the xritag that ties this io to the SGL pages.
+ *
+ * This routine will post the sgl pages for the IO that has the xritag
+ * that is in the iocbq structure. The xritag is assigned during iocbq
+ * creation and persists for as long as the driver is loaded.
+ * if the caller has fewer than 256 scatter gather segments to map then
+ * pdma_phys_addr1 should be 0.
+ * If the caller needs to map more than 256 scatter gather segment then
+ * pdma_phys_addr1 should be a valid physical address.
+ * physical address for SGLs must be 64 byte aligned.
+ * If you are going to map 2 SGL's then the first one must have 256 entries
+ * the second sgl can have between 1 and 256 entries.
+ *
+ * Return codes:
+ * 	0 - Success
+ * 	-ENXIO, -ENOMEM - Failure
+ **/
+int
+lpfc_sli4_post_sgl(struct lpfc_hba *phba,
+		dma_addr_t pdma_phys_addr0,
+		dma_addr_t pdma_phys_addr1,
+		uint16_t xritag)
+{
+	struct lpfc_mbx_post_sgl_pages *post_sgl_pages;
+	LPFC_MBOXQ_t *mbox;
+	int rc;
+	uint32_t shdr_status, shdr_add_status;
+	uint32_t mbox_tmo;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	if (xritag == NO_XRI) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0364 Invalid param:\n");
+		return -EINVAL;
+	}
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
+			sizeof(struct lpfc_mbx_post_sgl_pages) -
+			sizeof(struct lpfc_sli4_cfg_mhdr), LPFC_SLI4_MBX_EMBED);
+
+	post_sgl_pages = (struct lpfc_mbx_post_sgl_pages *)
+				&mbox->u.mqe.un.post_sgl_pages;
+	bf_set(lpfc_post_sgl_pages_xri, post_sgl_pages, xritag);
+	bf_set(lpfc_post_sgl_pages_xricnt, post_sgl_pages, 1);
+
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg0_addr_lo	=
+				cpu_to_le32(putPaddrLow(pdma_phys_addr0));
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg0_addr_hi =
+				cpu_to_le32(putPaddrHigh(pdma_phys_addr0));
+
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg1_addr_lo	=
+				cpu_to_le32(putPaddrLow(pdma_phys_addr1));
+	post_sgl_pages->sgl_pg_pairs[0].sgl_pg1_addr_hi =
+				cpu_to_le32(putPaddrHigh(pdma_phys_addr1));
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) &post_sgl_pages->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (!phba->sli4_hba.intr_enable)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	else if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2511 POST_SGL mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+	}
+	return 0;
+}
+
+/**
+ * lpfc_sli4_alloc_xri - Get an available rpi in the device's range
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec.  This routine
+ * posts a SLI4_PAGE_SIZE memory region to the port to hold up to
+ * SLI4_PAGE_SIZE modulo 64 rpi context headers.
+ *
+ * Returns
+ *	A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful
+ *	LPFC_RPI_ALLOC_ERROR if no rpis are available.
+ **/
+static uint16_t
+lpfc_sli4_alloc_xri(struct lpfc_hba *phba)
+{
+	unsigned long xri;
+
+	/*
+	 * Fetch the next logical xri.  Because this index is logical,
+	 * the driver starts at 0 each time.
+	 */
+	spin_lock_irq(&phba->hbalock);
+	xri = find_first_zero_bit(phba->sli4_hba.xri_bmask,
+				 phba->sli4_hba.max_cfg_param.max_xri);
+	if (xri >= phba->sli4_hba.max_cfg_param.max_xri) {
+		spin_unlock_irq(&phba->hbalock);
+		return NO_XRI;
+	} else {
+		set_bit(xri, phba->sli4_hba.xri_bmask);
+		phba->sli4_hba.max_cfg_param.xri_used++;
+	}
+	spin_unlock_irq(&phba->hbalock);
+	return xri;
+}
+
+/**
+ * __lpfc_sli4_free_xri - Release an xri for reuse.
+ * @phba: pointer to lpfc hba data structure.
+ * @xri: xri to release.
+ *
+ * This routine is invoked to release an xri to the pool of
+ * available rpis maintained by the driver.
+ **/
+static void
+__lpfc_sli4_free_xri(struct lpfc_hba *phba, int xri)
+{
+	if (test_and_clear_bit(xri, phba->sli4_hba.xri_bmask)) {
+		phba->sli4_hba.max_cfg_param.xri_used--;
+	}
+}
+
+/**
+ * lpfc_sli4_free_xri - Release an xri for reuse.
+ * @phba: pointer to lpfc hba data structure.
+ * @xri: xri to release.
+ *
+ * This routine is invoked to release an xri to the pool of
+ * available rpis maintained by the driver.
+ **/
+void
+lpfc_sli4_free_xri(struct lpfc_hba *phba, int xri)
+{
+	spin_lock_irq(&phba->hbalock);
+	__lpfc_sli4_free_xri(phba, xri);
+	spin_unlock_irq(&phba->hbalock);
+}
+
+/**
+ * lpfc_sli4_next_xritag - Get an xritag for the io
+ * @phba: Pointer to HBA context object.
+ *
+ * This function gets an xritag for the iocb. If there is no unused xritag
+ * it will return 0xffff.
+ * The function returns the allocated xritag if successful, else returns zero.
+ * Zero is not a valid xritag.
+ * The caller is not required to hold any lock.
+ **/
+uint16_t
+lpfc_sli4_next_xritag(struct lpfc_hba *phba)
+{
+	uint16_t xri_index;
+
+	xri_index = lpfc_sli4_alloc_xri(phba);
+	if (xri_index == NO_XRI)
+		lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+				"2004 Failed to allocate XRI.last XRITAG is %d"
+				" Max XRI is %d, Used XRI is %d\n",
+				xri_index,
+				phba->sli4_hba.max_cfg_param.max_xri,
+				phba->sli4_hba.max_cfg_param.xri_used);
+	return xri_index;
+}
+
+/**
+ * lpfc_sli4_post_sgl_list - post a block of ELS sgls to the port.
+ * @phba: pointer to lpfc hba data structure.
+ * @post_sgl_list: pointer to els sgl entry list.
+ * @post_cnt: number of els sgl entries on the list.
+ *
+ * This routine is invoked to post a block of driver's sgl pages to the
+ * HBA using non-embedded mailbox command. No Lock is held. This routine
+ * is only called when the driver is loading and after all IO has been
+ * stopped.
+ **/
+static int
+lpfc_sli4_post_sgl_list(struct lpfc_hba *phba,
+			    struct list_head *post_sgl_list,
+			    int post_cnt)
+{
+	struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+	struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+	struct sgl_page_pairs *sgl_pg_pairs;
+	void *viraddr;
+	LPFC_MBOXQ_t *mbox;
+	uint32_t reqlen, alloclen, pg_pairs;
+	uint32_t mbox_tmo;
+	uint16_t xritag_start = 0;
+	int rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	reqlen = post_cnt * sizeof(struct sgl_page_pairs) +
+		 sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+	if (reqlen > SLI4_PAGE_SIZE) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2559 Block sgl registration required DMA "
+				"size (%d) great than a page\n", reqlen);
+		return -ENOMEM;
+	}
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	/* Allocate DMA memory and set up the non-embedded mailbox command */
+	alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
+			 LPFC_SLI4_MBX_NEMBED);
+
+	if (alloclen < reqlen) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"0285 Allocated DMA memory size (%d) is "
+				"less than the requested DMA memory "
+				"size (%d)\n", alloclen, reqlen);
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+		return -ENOMEM;
+	}
+	/* Set up the SGL pages in the non-embedded DMA pages */
+	viraddr = mbox->sge_array->addr[0];
+	sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+	sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+	pg_pairs = 0;
+	list_for_each_entry_safe(sglq_entry, sglq_next, post_sgl_list, list) {
+		/* Set up the sge entry */
+		sgl_pg_pairs->sgl_pg0_addr_lo =
+				cpu_to_le32(putPaddrLow(sglq_entry->phys));
+		sgl_pg_pairs->sgl_pg0_addr_hi =
+				cpu_to_le32(putPaddrHigh(sglq_entry->phys));
+		sgl_pg_pairs->sgl_pg1_addr_lo =
+				cpu_to_le32(putPaddrLow(0));
+		sgl_pg_pairs->sgl_pg1_addr_hi =
+				cpu_to_le32(putPaddrHigh(0));
+
+		/* Keep the first xritag on the list */
+		if (pg_pairs == 0)
+			xritag_start = sglq_entry->sli4_xritag;
+		sgl_pg_pairs++;
+		pg_pairs++;
+	}
+
+	/* Complete initialization and perform endian conversion. */
+	bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
+	bf_set(lpfc_post_sgl_pages_xricnt, sgl, post_cnt);
+	sgl->word0 = cpu_to_le32(sgl->word0);
+
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (!phba->sli4_hba.intr_enable)
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+	else if (rc != MBX_TIMEOUT)
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2513 POST_SGL_BLOCK mailbox command failed "
+				"status x%x add_status x%x mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_post_io_sgl_block - post a block of nvme sgl list to firmware
+ * @phba: pointer to lpfc hba data structure.
+ * @nblist: pointer to nvme buffer list.
+ * @count: number of scsi buffers on the list.
+ *
+ * This routine is invoked to post a block of @count scsi sgl pages from a
+ * SCSI buffer list @nblist to the HBA using non-embedded mailbox command.
+ * No Lock is held.
+ *
+ **/
+static int
+lpfc_sli4_post_io_sgl_block(struct lpfc_hba *phba, struct list_head *nblist,
+			    int count)
+{
+	struct lpfc_io_buf *lpfc_ncmd;
+	struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+	struct sgl_page_pairs *sgl_pg_pairs;
+	void *viraddr;
+	LPFC_MBOXQ_t *mbox;
+	uint32_t reqlen, alloclen, pg_pairs;
+	uint32_t mbox_tmo;
+	uint16_t xritag_start = 0;
+	int rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	dma_addr_t pdma_phys_bpl1;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* Calculate the requested length of the dma memory */
+	reqlen = count * sizeof(struct sgl_page_pairs) +
+		 sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+	if (reqlen > SLI4_PAGE_SIZE) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+				"6118 Block sgl registration required DMA "
+				"size (%d) great than a page\n", reqlen);
+		return -ENOMEM;
+	}
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"6119 Failed to allocate mbox cmd memory\n");
+		return -ENOMEM;
+	}
+
+	/* Allocate DMA memory and set up the non-embedded mailbox command */
+	alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+				    LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
+				    reqlen, LPFC_SLI4_MBX_NEMBED);
+
+	if (alloclen < reqlen) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"6120 Allocated DMA memory size (%d) is "
+				"less than the requested DMA memory "
+				"size (%d)\n", alloclen, reqlen);
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+		return -ENOMEM;
+	}
+
+	/* Get the first SGE entry from the non-embedded DMA memory */
+	viraddr = mbox->sge_array->addr[0];
+
+	/* Set up the SGL pages in the non-embedded DMA pages */
+	sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+	sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+	pg_pairs = 0;
+	list_for_each_entry(lpfc_ncmd, nblist, list) {
+		/* Set up the sge entry */
+		sgl_pg_pairs->sgl_pg0_addr_lo =
+			cpu_to_le32(putPaddrLow(lpfc_ncmd->dma_phys_sgl));
+		sgl_pg_pairs->sgl_pg0_addr_hi =
+			cpu_to_le32(putPaddrHigh(lpfc_ncmd->dma_phys_sgl));
+		if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+			pdma_phys_bpl1 = lpfc_ncmd->dma_phys_sgl +
+						SGL_PAGE_SIZE;
+		else
+			pdma_phys_bpl1 = 0;
+		sgl_pg_pairs->sgl_pg1_addr_lo =
+			cpu_to_le32(putPaddrLow(pdma_phys_bpl1));
+		sgl_pg_pairs->sgl_pg1_addr_hi =
+			cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
+		/* Keep the first xritag on the list */
+		if (pg_pairs == 0)
+			xritag_start = lpfc_ncmd->cur_iocbq.sli4_xritag;
+		sgl_pg_pairs++;
+		pg_pairs++;
+	}
+	bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
+	bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+	/* Perform endian conversion if necessary */
+	sgl->word0 = cpu_to_le32(sgl->word0);
+
+	if (!phba->sli4_hba.intr_enable) {
+		rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	} else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
+		rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+	shdr = (union lpfc_sli4_cfg_shdr *)&sgl->cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	if (!phba->sli4_hba.intr_enable)
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+	else if (rc != MBX_TIMEOUT)
+		lpfc_sli4_mbox_cmd_free(phba, mbox);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"6125 POST_SGL_BLOCK mailbox command failed "
+				"status x%x add_status x%x mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_post_io_sgl_list - Post blocks of nvme buffer sgls from a list
+ * @phba: pointer to lpfc hba data structure.
+ * @post_nblist: pointer to the nvme buffer list.
+ * @sb_count: number of nvme buffers.
+ *
+ * This routine walks a list of nvme buffers that was passed in. It attempts
+ * to construct blocks of nvme buffer sgls which contains contiguous xris and
+ * uses the non-embedded SGL block post mailbox commands to post to the port.
+ * For single NVME buffer sgl with non-contiguous xri, if any, it shall use
+ * embedded SGL post mailbox command for posting. The @post_nblist passed in
+ * must be local list, thus no lock is needed when manipulate the list.
+ *
+ * Returns: 0 = failure, non-zero number of successfully posted buffers.
+ **/
+int
+lpfc_sli4_post_io_sgl_list(struct lpfc_hba *phba,
+			   struct list_head *post_nblist, int sb_count)
+{
+	struct lpfc_io_buf *lpfc_ncmd, *lpfc_ncmd_next;
+	int status, sgl_size;
+	int post_cnt = 0, block_cnt = 0, num_posting = 0, num_posted = 0;
+	dma_addr_t pdma_phys_sgl1;
+	int last_xritag = NO_XRI;
+	int cur_xritag;
+	LIST_HEAD(prep_nblist);
+	LIST_HEAD(blck_nblist);
+	LIST_HEAD(nvme_nblist);
+
+	/* sanity check */
+	if (sb_count <= 0)
+		return -EINVAL;
+
+	sgl_size = phba->cfg_sg_dma_buf_size;
+	list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, post_nblist, list) {
+		list_del_init(&lpfc_ncmd->list);
+		block_cnt++;
+		if ((last_xritag != NO_XRI) &&
+		    (lpfc_ncmd->cur_iocbq.sli4_xritag != last_xritag + 1)) {
+			/* a hole in xri block, form a sgl posting block */
+			list_splice_init(&prep_nblist, &blck_nblist);
+			post_cnt = block_cnt - 1;
+			/* prepare list for next posting block */
+			list_add_tail(&lpfc_ncmd->list, &prep_nblist);
+			block_cnt = 1;
+		} else {
+			/* prepare list for next posting block */
+			list_add_tail(&lpfc_ncmd->list, &prep_nblist);
+			/* enough sgls for non-embed sgl mbox command */
+			if (block_cnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+				list_splice_init(&prep_nblist, &blck_nblist);
+				post_cnt = block_cnt;
+				block_cnt = 0;
+			}
+		}
+		num_posting++;
+		last_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
+
+		/* end of repost sgl list condition for NVME buffers */
+		if (num_posting == sb_count) {
+			if (post_cnt == 0) {
+				/* last sgl posting block */
+				list_splice_init(&prep_nblist, &blck_nblist);
+				post_cnt = block_cnt;
+			} else if (block_cnt == 1) {
+				/* last single sgl with non-contiguous xri */
+				if (sgl_size > SGL_PAGE_SIZE)
+					pdma_phys_sgl1 =
+						lpfc_ncmd->dma_phys_sgl +
+						SGL_PAGE_SIZE;
+				else
+					pdma_phys_sgl1 = 0;
+				cur_xritag = lpfc_ncmd->cur_iocbq.sli4_xritag;
+				status = lpfc_sli4_post_sgl(
+						phba, lpfc_ncmd->dma_phys_sgl,
+						pdma_phys_sgl1, cur_xritag);
+				if (status) {
+					/* Post error.  Buffer unavailable. */
+					lpfc_ncmd->flags |=
+						LPFC_SBUF_NOT_POSTED;
+				} else {
+					/* Post success. Bffer available. */
+					lpfc_ncmd->flags &=
+						~LPFC_SBUF_NOT_POSTED;
+					lpfc_ncmd->status = IOSTAT_SUCCESS;
+					num_posted++;
+				}
+				/* success, put on NVME buffer sgl list */
+				list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
+			}
+		}
+
+		/* continue until a nembed page worth of sgls */
+		if (post_cnt == 0)
+			continue;
+
+		/* post block of NVME buffer list sgls */
+		status = lpfc_sli4_post_io_sgl_block(phba, &blck_nblist,
+						     post_cnt);
+
+		/* don't reset xirtag due to hole in xri block */
+		if (block_cnt == 0)
+			last_xritag = NO_XRI;
+
+		/* reset NVME buffer post count for next round of posting */
+		post_cnt = 0;
+
+		/* put posted NVME buffer-sgl posted on NVME buffer sgl list */
+		while (!list_empty(&blck_nblist)) {
+			list_remove_head(&blck_nblist, lpfc_ncmd,
+					 struct lpfc_io_buf, list);
+			if (status) {
+				/* Post error.  Mark buffer unavailable. */
+				lpfc_ncmd->flags |= LPFC_SBUF_NOT_POSTED;
+			} else {
+				/* Post success, Mark buffer available. */
+				lpfc_ncmd->flags &= ~LPFC_SBUF_NOT_POSTED;
+				lpfc_ncmd->status = IOSTAT_SUCCESS;
+				num_posted++;
+			}
+			list_add_tail(&lpfc_ncmd->list, &nvme_nblist);
+		}
+	}
+	/* Push NVME buffers with sgl posted to the available list */
+	lpfc_io_buf_replenish(phba, &nvme_nblist);
+
+	return num_posted;
+}
+
+/**
+ * lpfc_fc_frame_check - Check that this frame is a valid frame to handle
+ * @phba: pointer to lpfc_hba struct that the frame was received on
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ *
+ * This function checks the fields in the @fc_hdr to see if the FC frame is a
+ * valid type of frame that the LPFC driver will handle. This function will
+ * return a zero if the frame is a valid frame or a non zero value when the
+ * frame does not pass the check.
+ **/
+static int
+lpfc_fc_frame_check(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr)
+{
+	/*  make rctl_names static to save stack space */
+	struct fc_vft_header *fc_vft_hdr;
+	uint32_t *header = (uint32_t *) fc_hdr;
+
+#define FC_RCTL_MDS_DIAGS	0xF4
+
+	switch (fc_hdr->fh_r_ctl) {
+	case FC_RCTL_DD_UNCAT:		/* uncategorized information */
+	case FC_RCTL_DD_SOL_DATA:	/* solicited data */
+	case FC_RCTL_DD_UNSOL_CTL:	/* unsolicited control */
+	case FC_RCTL_DD_SOL_CTL:	/* solicited control or reply */
+	case FC_RCTL_DD_UNSOL_DATA:	/* unsolicited data */
+	case FC_RCTL_DD_DATA_DESC:	/* data descriptor */
+	case FC_RCTL_DD_UNSOL_CMD:	/* unsolicited command */
+	case FC_RCTL_DD_CMD_STATUS:	/* command status */
+	case FC_RCTL_ELS_REQ:	/* extended link services request */
+	case FC_RCTL_ELS_REP:	/* extended link services reply */
+	case FC_RCTL_ELS4_REQ:	/* FC-4 ELS request */
+	case FC_RCTL_ELS4_REP:	/* FC-4 ELS reply */
+	case FC_RCTL_BA_ABTS: 	/* basic link service abort */
+	case FC_RCTL_BA_RMC: 	/* remove connection */
+	case FC_RCTL_BA_ACC:	/* basic accept */
+	case FC_RCTL_BA_RJT:	/* basic reject */
+	case FC_RCTL_BA_PRMT:
+	case FC_RCTL_ACK_1:	/* acknowledge_1 */
+	case FC_RCTL_ACK_0:	/* acknowledge_0 */
+	case FC_RCTL_P_RJT:	/* port reject */
+	case FC_RCTL_F_RJT:	/* fabric reject */
+	case FC_RCTL_P_BSY:	/* port busy */
+	case FC_RCTL_F_BSY:	/* fabric busy to data frame */
+	case FC_RCTL_F_BSYL:	/* fabric busy to link control frame */
+	case FC_RCTL_LCR:	/* link credit reset */
+	case FC_RCTL_MDS_DIAGS: /* MDS Diagnostics */
+	case FC_RCTL_END:	/* end */
+		break;
+	case FC_RCTL_VFTH:	/* Virtual Fabric tagging Header */
+		fc_vft_hdr = (struct fc_vft_header *)fc_hdr;
+		fc_hdr = &((struct fc_frame_header *)fc_vft_hdr)[1];
+		return lpfc_fc_frame_check(phba, fc_hdr);
+	case FC_RCTL_BA_NOP:	/* basic link service NOP */
+	default:
+		goto drop;
+	}
+
+	switch (fc_hdr->fh_type) {
+	case FC_TYPE_BLS:
+	case FC_TYPE_ELS:
+	case FC_TYPE_FCP:
+	case FC_TYPE_CT:
+	case FC_TYPE_NVME:
+		break;
+	case FC_TYPE_IP:
+	case FC_TYPE_ILS:
+	default:
+		goto drop;
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
+			"2538 Received frame rctl:x%x, type:x%x, "
+			"frame Data:%08x %08x %08x %08x %08x %08x %08x\n",
+			fc_hdr->fh_r_ctl, fc_hdr->fh_type,
+			be32_to_cpu(header[0]), be32_to_cpu(header[1]),
+			be32_to_cpu(header[2]), be32_to_cpu(header[3]),
+			be32_to_cpu(header[4]), be32_to_cpu(header[5]),
+			be32_to_cpu(header[6]));
+	return 0;
+drop:
+	lpfc_printf_log(phba, KERN_WARNING, LOG_ELS,
+			"2539 Dropped frame rctl:x%x type:x%x\n",
+			fc_hdr->fh_r_ctl, fc_hdr->fh_type);
+	return 1;
+}
+
+/**
+ * lpfc_fc_hdr_get_vfi - Get the VFI from an FC frame
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ *
+ * This function processes the FC header to retrieve the VFI from the VF
+ * header, if one exists. This function will return the VFI if one exists
+ * or 0 if no VSAN Header exists.
+ **/
+static uint32_t
+lpfc_fc_hdr_get_vfi(struct fc_frame_header *fc_hdr)
+{
+	struct fc_vft_header *fc_vft_hdr = (struct fc_vft_header *)fc_hdr;
+
+	if (fc_hdr->fh_r_ctl != FC_RCTL_VFTH)
+		return 0;
+	return bf_get(fc_vft_hdr_vf_id, fc_vft_hdr);
+}
+
+/**
+ * lpfc_fc_frame_to_vport - Finds the vport that a frame is destined to
+ * @phba: Pointer to the HBA structure to search for the vport on
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ * @fcfi: The FC Fabric ID that the frame came from
+ * @did: Destination ID to match against
+ *
+ * This function searches the @phba for a vport that matches the content of the
+ * @fc_hdr passed in and the @fcfi. This function uses the @fc_hdr to fetch the
+ * VFI, if the Virtual Fabric Tagging Header exists, and the DID. This function
+ * returns the matching vport pointer or NULL if unable to match frame to a
+ * vport.
+ **/
+static struct lpfc_vport *
+lpfc_fc_frame_to_vport(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr,
+		       uint16_t fcfi, uint32_t did)
+{
+	struct lpfc_vport **vports;
+	struct lpfc_vport *vport = NULL;
+	int i;
+
+	if (did == Fabric_DID)
+		return phba->pport;
+	if ((phba->pport->fc_flag & FC_PT2PT) &&
+		!(phba->link_state == LPFC_HBA_READY))
+		return phba->pport;
+
+	vports = lpfc_create_vport_work_array(phba);
+	if (vports != NULL) {
+		for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+			if (phba->fcf.fcfi == fcfi &&
+			    vports[i]->vfi == lpfc_fc_hdr_get_vfi(fc_hdr) &&
+			    vports[i]->fc_myDID == did) {
+				vport = vports[i];
+				break;
+			}
+		}
+	}
+	lpfc_destroy_vport_work_array(phba, vports);
+	return vport;
+}
+
+/**
+ * lpfc_update_rcv_time_stamp - Update vport's rcv seq time stamp
+ * @vport: The vport to work on.
+ *
+ * This function updates the receive sequence time stamp for this vport. The
+ * receive sequence time stamp indicates the time that the last frame of the
+ * the sequence that has been idle for the longest amount of time was received.
+ * the driver uses this time stamp to indicate if any received sequences have
+ * timed out.
+ **/
+static void
+lpfc_update_rcv_time_stamp(struct lpfc_vport *vport)
+{
+	struct lpfc_dmabuf *h_buf;
+	struct hbq_dmabuf *dmabuf = NULL;
+
+	/* get the oldest sequence on the rcv list */
+	h_buf = list_get_first(&vport->rcv_buffer_list,
+			       struct lpfc_dmabuf, list);
+	if (!h_buf)
+		return;
+	dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
+	vport->rcv_buffer_time_stamp = dmabuf->time_stamp;
+}
+
+/**
+ * lpfc_cleanup_rcv_buffers - Cleans up all outstanding receive sequences.
+ * @vport: The vport that the received sequences were sent to.
+ *
+ * This function cleans up all outstanding received sequences. This is called
+ * by the driver when a link event or user action invalidates all the received
+ * sequences.
+ **/
+void
+lpfc_cleanup_rcv_buffers(struct lpfc_vport *vport)
+{
+	struct lpfc_dmabuf *h_buf, *hnext;
+	struct lpfc_dmabuf *d_buf, *dnext;
+	struct hbq_dmabuf *dmabuf = NULL;
+
+	/* start with the oldest sequence on the rcv list */
+	list_for_each_entry_safe(h_buf, hnext, &vport->rcv_buffer_list, list) {
+		dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
+		list_del_init(&dmabuf->hbuf.list);
+		list_for_each_entry_safe(d_buf, dnext,
+					 &dmabuf->dbuf.list, list) {
+			list_del_init(&d_buf->list);
+			lpfc_in_buf_free(vport->phba, d_buf);
+		}
+		lpfc_in_buf_free(vport->phba, &dmabuf->dbuf);
+	}
+}
+
+/**
+ * lpfc_rcv_seq_check_edtov - Cleans up timed out receive sequences.
+ * @vport: The vport that the received sequences were sent to.
+ *
+ * This function determines whether any received sequences have timed out by
+ * first checking the vport's rcv_buffer_time_stamp. If this time_stamp
+ * indicates that there is at least one timed out sequence this routine will
+ * go through the received sequences one at a time from most inactive to most
+ * active to determine which ones need to be cleaned up. Once it has determined
+ * that a sequence needs to be cleaned up it will simply free up the resources
+ * without sending an abort.
+ **/
+void
+lpfc_rcv_seq_check_edtov(struct lpfc_vport *vport)
+{
+	struct lpfc_dmabuf *h_buf, *hnext;
+	struct lpfc_dmabuf *d_buf, *dnext;
+	struct hbq_dmabuf *dmabuf = NULL;
+	unsigned long timeout;
+	int abort_count = 0;
+
+	timeout = (msecs_to_jiffies(vport->phba->fc_edtov) +
+		   vport->rcv_buffer_time_stamp);
+	if (list_empty(&vport->rcv_buffer_list) ||
+	    time_before(jiffies, timeout))
+		return;
+	/* start with the oldest sequence on the rcv list */
+	list_for_each_entry_safe(h_buf, hnext, &vport->rcv_buffer_list, list) {
+		dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
+		timeout = (msecs_to_jiffies(vport->phba->fc_edtov) +
+			   dmabuf->time_stamp);
+		if (time_before(jiffies, timeout))
+			break;
+		abort_count++;
+		list_del_init(&dmabuf->hbuf.list);
+		list_for_each_entry_safe(d_buf, dnext,
+					 &dmabuf->dbuf.list, list) {
+			list_del_init(&d_buf->list);
+			lpfc_in_buf_free(vport->phba, d_buf);
+		}
+		lpfc_in_buf_free(vport->phba, &dmabuf->dbuf);
+	}
+	if (abort_count)
+		lpfc_update_rcv_time_stamp(vport);
+}
+
+/**
+ * lpfc_fc_frame_add - Adds a frame to the vport's list of received sequences
+ * @vport: pointer to a vitural port
+ * @dmabuf: pointer to a dmabuf that describes the hdr and data of the FC frame
+ *
+ * This function searches through the existing incomplete sequences that have
+ * been sent to this @vport. If the frame matches one of the incomplete
+ * sequences then the dbuf in the @dmabuf is added to the list of frames that
+ * make up that sequence. If no sequence is found that matches this frame then
+ * the function will add the hbuf in the @dmabuf to the @vport's rcv_buffer_list
+ * This function returns a pointer to the first dmabuf in the sequence list that
+ * the frame was linked to.
+ **/
+static struct hbq_dmabuf *
+lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf)
+{
+	struct fc_frame_header *new_hdr;
+	struct fc_frame_header *temp_hdr;
+	struct lpfc_dmabuf *d_buf;
+	struct lpfc_dmabuf *h_buf;
+	struct hbq_dmabuf *seq_dmabuf = NULL;
+	struct hbq_dmabuf *temp_dmabuf = NULL;
+	uint8_t	found = 0;
+
+	INIT_LIST_HEAD(&dmabuf->dbuf.list);
+	dmabuf->time_stamp = jiffies;
+	new_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+
+	/* Use the hdr_buf to find the sequence that this frame belongs to */
+	list_for_each_entry(h_buf, &vport->rcv_buffer_list, list) {
+		temp_hdr = (struct fc_frame_header *)h_buf->virt;
+		if ((temp_hdr->fh_seq_id != new_hdr->fh_seq_id) ||
+		    (temp_hdr->fh_ox_id != new_hdr->fh_ox_id) ||
+		    (memcmp(&temp_hdr->fh_s_id, &new_hdr->fh_s_id, 3)))
+			continue;
+		/* found a pending sequence that matches this frame */
+		seq_dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
+		break;
+	}
+	if (!seq_dmabuf) {
+		/*
+		 * This indicates first frame received for this sequence.
+		 * Queue the buffer on the vport's rcv_buffer_list.
+		 */
+		list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list);
+		lpfc_update_rcv_time_stamp(vport);
+		return dmabuf;
+	}
+	temp_hdr = seq_dmabuf->hbuf.virt;
+	if (be16_to_cpu(new_hdr->fh_seq_cnt) <
+		be16_to_cpu(temp_hdr->fh_seq_cnt)) {
+		list_del_init(&seq_dmabuf->hbuf.list);
+		list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list);
+		list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list);
+		lpfc_update_rcv_time_stamp(vport);
+		return dmabuf;
+	}
+	/* move this sequence to the tail to indicate a young sequence */
+	list_move_tail(&seq_dmabuf->hbuf.list, &vport->rcv_buffer_list);
+	seq_dmabuf->time_stamp = jiffies;
+	lpfc_update_rcv_time_stamp(vport);
+	if (list_empty(&seq_dmabuf->dbuf.list)) {
+		list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list);
+		return seq_dmabuf;
+	}
+	/* find the correct place in the sequence to insert this frame */
+	d_buf = list_entry(seq_dmabuf->dbuf.list.prev, typeof(*d_buf), list);
+	while (!found) {
+		temp_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+		temp_hdr = (struct fc_frame_header *)temp_dmabuf->hbuf.virt;
+		/*
+		 * If the frame's sequence count is greater than the frame on
+		 * the list then insert the frame right after this frame
+		 */
+		if (be16_to_cpu(new_hdr->fh_seq_cnt) >
+			be16_to_cpu(temp_hdr->fh_seq_cnt)) {
+			list_add(&dmabuf->dbuf.list, &temp_dmabuf->dbuf.list);
+			found = 1;
+			break;
+		}
+
+		if (&d_buf->list == &seq_dmabuf->dbuf.list)
+			break;
+		d_buf = list_entry(d_buf->list.prev, typeof(*d_buf), list);
+	}
+
+	if (found)
+		return seq_dmabuf;
+	return NULL;
+}
+
+/**
+ * lpfc_sli4_abort_partial_seq - Abort partially assembled unsol sequence
+ * @vport: pointer to a vitural port
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function tries to abort from the partially assembed sequence, described
+ * by the information from basic abbort @dmabuf. It checks to see whether such
+ * partially assembled sequence held by the driver. If so, it shall free up all
+ * the frames from the partially assembled sequence.
+ *
+ * Return
+ * true  -- if there is matching partially assembled sequence present and all
+ *          the frames freed with the sequence;
+ * false -- if there is no matching partially assembled sequence present so
+ *          nothing got aborted in the lower layer driver
+ **/
+static bool
+lpfc_sli4_abort_partial_seq(struct lpfc_vport *vport,
+			    struct hbq_dmabuf *dmabuf)
+{
+	struct fc_frame_header *new_hdr;
+	struct fc_frame_header *temp_hdr;
+	struct lpfc_dmabuf *d_buf, *n_buf, *h_buf;
+	struct hbq_dmabuf *seq_dmabuf = NULL;
+
+	/* Use the hdr_buf to find the sequence that matches this frame */
+	INIT_LIST_HEAD(&dmabuf->dbuf.list);
+	INIT_LIST_HEAD(&dmabuf->hbuf.list);
+	new_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+	list_for_each_entry(h_buf, &vport->rcv_buffer_list, list) {
+		temp_hdr = (struct fc_frame_header *)h_buf->virt;
+		if ((temp_hdr->fh_seq_id != new_hdr->fh_seq_id) ||
+		    (temp_hdr->fh_ox_id != new_hdr->fh_ox_id) ||
+		    (memcmp(&temp_hdr->fh_s_id, &new_hdr->fh_s_id, 3)))
+			continue;
+		/* found a pending sequence that matches this frame */
+		seq_dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
+		break;
+	}
+
+	/* Free up all the frames from the partially assembled sequence */
+	if (seq_dmabuf) {
+		list_for_each_entry_safe(d_buf, n_buf,
+					 &seq_dmabuf->dbuf.list, list) {
+			list_del_init(&d_buf->list);
+			lpfc_in_buf_free(vport->phba, d_buf);
+		}
+		return true;
+	}
+	return false;
+}
+
+/**
+ * lpfc_sli4_abort_ulp_seq - Abort assembled unsol sequence from ulp
+ * @vport: pointer to a vitural port
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function tries to abort from the assembed sequence from upper level
+ * protocol, described by the information from basic abbort @dmabuf. It
+ * checks to see whether such pending context exists at upper level protocol.
+ * If so, it shall clean up the pending context.
+ *
+ * Return
+ * true  -- if there is matching pending context of the sequence cleaned
+ *          at ulp;
+ * false -- if there is no matching pending context of the sequence present
+ *          at ulp.
+ **/
+static bool
+lpfc_sli4_abort_ulp_seq(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf)
+{
+	struct lpfc_hba *phba = vport->phba;
+	int handled;
+
+	/* Accepting abort at ulp with SLI4 only */
+	if (phba->sli_rev < LPFC_SLI_REV4)
+		return false;
+
+	/* Register all caring upper level protocols to attend abort */
+	handled = lpfc_ct_handle_unsol_abort(phba, dmabuf);
+	if (handled)
+		return true;
+
+	return false;
+}
+
+/**
+ * lpfc_sli4_seq_abort_rsp_cmpl - BLS ABORT RSP seq abort iocb complete handler
+ * @phba: Pointer to HBA context object.
+ * @cmd_iocbq: pointer to the command iocbq structure.
+ * @rsp_iocbq: pointer to the response iocbq structure.
+ *
+ * This function handles the sequence abort response iocb command complete
+ * event. It properly releases the memory allocated to the sequence abort
+ * accept iocb.
+ **/
+static void
+lpfc_sli4_seq_abort_rsp_cmpl(struct lpfc_hba *phba,
+			     struct lpfc_iocbq *cmd_iocbq,
+			     struct lpfc_iocbq *rsp_iocbq)
+{
+	if (cmd_iocbq) {
+		lpfc_nlp_put(cmd_iocbq->ndlp);
+		lpfc_sli_release_iocbq(phba, cmd_iocbq);
+	}
+
+	/* Failure means BLS ABORT RSP did not get delivered to remote node*/
+	if (rsp_iocbq && rsp_iocbq->iocb.ulpStatus)
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"3154 BLS ABORT RSP failed, data:  x%x/x%x\n",
+			get_job_ulpstatus(phba, rsp_iocbq),
+			get_job_word4(phba, rsp_iocbq));
+}
+
+/**
+ * lpfc_sli4_xri_inrange - check xri is in range of xris owned by driver.
+ * @phba: Pointer to HBA context object.
+ * @xri: xri id in transaction.
+ *
+ * This function validates the xri maps to the known range of XRIs allocated an
+ * used by the driver.
+ **/
+uint16_t
+lpfc_sli4_xri_inrange(struct lpfc_hba *phba,
+		      uint16_t xri)
+{
+	uint16_t i;
+
+	for (i = 0; i < phba->sli4_hba.max_cfg_param.max_xri; i++) {
+		if (xri == phba->sli4_hba.xri_ids[i])
+			return i;
+	}
+	return NO_XRI;
+}
+
+/**
+ * lpfc_sli4_seq_abort_rsp - bls rsp to sequence abort
+ * @vport: pointer to a virtual port.
+ * @fc_hdr: pointer to a FC frame header.
+ * @aborted: was the partially assembled receive sequence successfully aborted
+ *
+ * This function sends a basic response to a previous unsol sequence abort
+ * event after aborting the sequence handling.
+ **/
+void
+lpfc_sli4_seq_abort_rsp(struct lpfc_vport *vport,
+			struct fc_frame_header *fc_hdr, bool aborted)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_iocbq *ctiocb = NULL;
+	struct lpfc_nodelist *ndlp;
+	uint16_t oxid, rxid, xri, lxri;
+	uint32_t sid, fctl;
+	union lpfc_wqe128 *icmd;
+	int rc;
+
+	if (!lpfc_is_link_up(phba))
+		return;
+
+	sid = sli4_sid_from_fc_hdr(fc_hdr);
+	oxid = be16_to_cpu(fc_hdr->fh_ox_id);
+	rxid = be16_to_cpu(fc_hdr->fh_rx_id);
+
+	ndlp = lpfc_findnode_did(vport, sid);
+	if (!ndlp) {
+		ndlp = lpfc_nlp_init(vport, sid);
+		if (!ndlp) {
+			lpfc_printf_vlog(vport, KERN_WARNING, LOG_ELS,
+					 "1268 Failed to allocate ndlp for "
+					 "oxid:x%x SID:x%x\n", oxid, sid);
+			return;
+		}
+		/* Put ndlp onto pport node list */
+		lpfc_enqueue_node(vport, ndlp);
+	}
+
+	/* Allocate buffer for rsp iocb */
+	ctiocb = lpfc_sli_get_iocbq(phba);
+	if (!ctiocb)
+		return;
+
+	icmd = &ctiocb->wqe;
+
+	/* Extract the F_CTL field from FC_HDR */
+	fctl = sli4_fctl_from_fc_hdr(fc_hdr);
+
+	ctiocb->ndlp = lpfc_nlp_get(ndlp);
+	if (!ctiocb->ndlp) {
+		lpfc_sli_release_iocbq(phba, ctiocb);
+		return;
+	}
+
+	ctiocb->vport = phba->pport;
+	ctiocb->cmd_cmpl = lpfc_sli4_seq_abort_rsp_cmpl;
+	ctiocb->sli4_lxritag = NO_XRI;
+	ctiocb->sli4_xritag = NO_XRI;
+	ctiocb->abort_rctl = FC_RCTL_BA_ACC;
+
+	if (fctl & FC_FC_EX_CTX)
+		/* Exchange responder sent the abort so we
+		 * own the oxid.
+		 */
+		xri = oxid;
+	else
+		xri = rxid;
+	lxri = lpfc_sli4_xri_inrange(phba, xri);
+	if (lxri != NO_XRI)
+		lpfc_set_rrq_active(phba, ndlp, lxri,
+			(xri == oxid) ? rxid : oxid, 0);
+	/* For BA_ABTS from exchange responder, if the logical xri with
+	 * the oxid maps to the FCP XRI range, the port no longer has
+	 * that exchange context, send a BLS_RJT. Override the IOCB for
+	 * a BA_RJT.
+	 */
+	if ((fctl & FC_FC_EX_CTX) &&
+	    (lxri > lpfc_sli4_get_iocb_cnt(phba))) {
+		ctiocb->abort_rctl = FC_RCTL_BA_RJT;
+		bf_set(xmit_bls_rsp64_rjt_vspec, &icmd->xmit_bls_rsp, 0);
+		bf_set(xmit_bls_rsp64_rjt_expc, &icmd->xmit_bls_rsp,
+		       FC_BA_RJT_INV_XID);
+		bf_set(xmit_bls_rsp64_rjt_rsnc, &icmd->xmit_bls_rsp,
+		       FC_BA_RJT_UNABLE);
+	}
+
+	/* If BA_ABTS failed to abort a partially assembled receive sequence,
+	 * the driver no longer has that exchange, send a BLS_RJT. Override
+	 * the IOCB for a BA_RJT.
+	 */
+	if (aborted == false) {
+		ctiocb->abort_rctl = FC_RCTL_BA_RJT;
+		bf_set(xmit_bls_rsp64_rjt_vspec, &icmd->xmit_bls_rsp, 0);
+		bf_set(xmit_bls_rsp64_rjt_expc, &icmd->xmit_bls_rsp,
+		       FC_BA_RJT_INV_XID);
+		bf_set(xmit_bls_rsp64_rjt_rsnc, &icmd->xmit_bls_rsp,
+		       FC_BA_RJT_UNABLE);
+	}
+
+	if (fctl & FC_FC_EX_CTX) {
+		/* ABTS sent by responder to CT exchange, construction
+		 * of BA_ACC will use OX_ID from ABTS for the XRI_TAG
+		 * field and RX_ID from ABTS for RX_ID field.
+		 */
+		ctiocb->abort_bls = LPFC_ABTS_UNSOL_RSP;
+		bf_set(xmit_bls_rsp64_rxid, &icmd->xmit_bls_rsp, rxid);
+	} else {
+		/* ABTS sent by initiator to CT exchange, construction
+		 * of BA_ACC will need to allocate a new XRI as for the
+		 * XRI_TAG field.
+		 */
+		ctiocb->abort_bls = LPFC_ABTS_UNSOL_INT;
+	}
+
+	/* OX_ID is invariable to who sent ABTS to CT exchange */
+	bf_set(xmit_bls_rsp64_oxid, &icmd->xmit_bls_rsp, oxid);
+	bf_set(xmit_bls_rsp64_oxid, &icmd->xmit_bls_rsp, rxid);
+
+	/* Use CT=VPI */
+	bf_set(wqe_els_did, &icmd->xmit_bls_rsp.wqe_dest,
+	       ndlp->nlp_DID);
+	bf_set(xmit_bls_rsp64_temprpi, &icmd->xmit_bls_rsp,
+	       phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
+	bf_set(wqe_cmnd, &icmd->generic.wqe_com, CMD_XMIT_BLS_RSP64_CX);
+
+	/* Xmit CT abts response on exchange <xid> */
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+			 "1200 Send BLS cmd x%x on oxid x%x Data: x%x\n",
+			 ctiocb->abort_rctl, oxid, phba->link_state);
+
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, ctiocb, 0);
+	if (rc == IOCB_ERROR) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
+				 "2925 Failed to issue CT ABTS RSP x%x on "
+				 "xri x%x, Data x%x\n",
+				 ctiocb->abort_rctl, oxid,
+				 phba->link_state);
+		lpfc_nlp_put(ndlp);
+		ctiocb->ndlp = NULL;
+		lpfc_sli_release_iocbq(phba, ctiocb);
+	}
+}
+
+/**
+ * lpfc_sli4_handle_unsol_abort - Handle sli-4 unsolicited abort event
+ * @vport: Pointer to the vport on which this sequence was received
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function handles an SLI-4 unsolicited abort event. If the unsolicited
+ * receive sequence is only partially assembed by the driver, it shall abort
+ * the partially assembled frames for the sequence. Otherwise, if the
+ * unsolicited receive sequence has been completely assembled and passed to
+ * the Upper Layer Protocol (ULP), it then mark the per oxid status for the
+ * unsolicited sequence has been aborted. After that, it will issue a basic
+ * accept to accept the abort.
+ **/
+static void
+lpfc_sli4_handle_unsol_abort(struct lpfc_vport *vport,
+			     struct hbq_dmabuf *dmabuf)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct fc_frame_header fc_hdr;
+	uint32_t fctl;
+	bool aborted;
+
+	/* Make a copy of fc_hdr before the dmabuf being released */
+	memcpy(&fc_hdr, dmabuf->hbuf.virt, sizeof(struct fc_frame_header));
+	fctl = sli4_fctl_from_fc_hdr(&fc_hdr);
+
+	if (fctl & FC_FC_EX_CTX) {
+		/* ABTS by responder to exchange, no cleanup needed */
+		aborted = true;
+	} else {
+		/* ABTS by initiator to exchange, need to do cleanup */
+		aborted = lpfc_sli4_abort_partial_seq(vport, dmabuf);
+		if (aborted == false)
+			aborted = lpfc_sli4_abort_ulp_seq(vport, dmabuf);
+	}
+	lpfc_in_buf_free(phba, &dmabuf->dbuf);
+
+	if (phba->nvmet_support) {
+		lpfc_nvmet_rcv_unsol_abort(vport, &fc_hdr);
+		return;
+	}
+
+	/* Respond with BA_ACC or BA_RJT accordingly */
+	lpfc_sli4_seq_abort_rsp(vport, &fc_hdr, aborted);
+}
+
+/**
+ * lpfc_seq_complete - Indicates if a sequence is complete
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function checks the sequence, starting with the frame described by
+ * @dmabuf, to see if all the frames associated with this sequence are present.
+ * the frames associated with this sequence are linked to the @dmabuf using the
+ * dbuf list. This function looks for two major things. 1) That the first frame
+ * has a sequence count of zero. 2) There is a frame with last frame of sequence
+ * set. 3) That there are no holes in the sequence count. The function will
+ * return 1 when the sequence is complete, otherwise it will return 0.
+ **/
+static int
+lpfc_seq_complete(struct hbq_dmabuf *dmabuf)
+{
+	struct fc_frame_header *hdr;
+	struct lpfc_dmabuf *d_buf;
+	struct hbq_dmabuf *seq_dmabuf;
+	uint32_t fctl;
+	int seq_count = 0;
+
+	hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+	/* make sure first fame of sequence has a sequence count of zero */
+	if (hdr->fh_seq_cnt != seq_count)
+		return 0;
+	fctl = (hdr->fh_f_ctl[0] << 16 |
+		hdr->fh_f_ctl[1] << 8 |
+		hdr->fh_f_ctl[2]);
+	/* If last frame of sequence we can return success. */
+	if (fctl & FC_FC_END_SEQ)
+		return 1;
+	list_for_each_entry(d_buf, &dmabuf->dbuf.list, list) {
+		seq_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+		hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+		/* If there is a hole in the sequence count then fail. */
+		if (++seq_count != be16_to_cpu(hdr->fh_seq_cnt))
+			return 0;
+		fctl = (hdr->fh_f_ctl[0] << 16 |
+			hdr->fh_f_ctl[1] << 8 |
+			hdr->fh_f_ctl[2]);
+		/* If last frame of sequence we can return success. */
+		if (fctl & FC_FC_END_SEQ)
+			return 1;
+	}
+	return 0;
+}
+
+/**
+ * lpfc_prep_seq - Prep sequence for ULP processing
+ * @vport: Pointer to the vport on which this sequence was received
+ * @seq_dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function takes a sequence, described by a list of frames, and creates
+ * a list of iocbq structures to describe the sequence. This iocbq list will be
+ * used to issue to the generic unsolicited sequence handler. This routine
+ * returns a pointer to the first iocbq in the list. If the function is unable
+ * to allocate an iocbq then it throw out the received frames that were not
+ * able to be described and return a pointer to the first iocbq. If unable to
+ * allocate any iocbqs (including the first) this function will return NULL.
+ **/
+static struct lpfc_iocbq *
+lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
+{
+	struct hbq_dmabuf *hbq_buf;
+	struct lpfc_dmabuf *d_buf, *n_buf;
+	struct lpfc_iocbq *first_iocbq, *iocbq;
+	struct fc_frame_header *fc_hdr;
+	uint32_t sid;
+	uint32_t len, tot_len;
+
+	fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+	/* remove from receive buffer list */
+	list_del_init(&seq_dmabuf->hbuf.list);
+	lpfc_update_rcv_time_stamp(vport);
+	/* get the Remote Port's SID */
+	sid = sli4_sid_from_fc_hdr(fc_hdr);
+	tot_len = 0;
+	/* Get an iocbq struct to fill in. */
+	first_iocbq = lpfc_sli_get_iocbq(vport->phba);
+	if (first_iocbq) {
+		/* Initialize the first IOCB. */
+		first_iocbq->wcqe_cmpl.total_data_placed = 0;
+		bf_set(lpfc_wcqe_c_status, &first_iocbq->wcqe_cmpl,
+		       IOSTAT_SUCCESS);
+		first_iocbq->vport = vport;
+
+		/* Check FC Header to see what TYPE of frame we are rcv'ing */
+		if (sli4_type_from_fc_hdr(fc_hdr) == FC_TYPE_ELS) {
+			bf_set(els_rsp64_sid, &first_iocbq->wqe.xmit_els_rsp,
+			       sli4_did_from_fc_hdr(fc_hdr));
+		}
+
+		bf_set(wqe_ctxt_tag, &first_iocbq->wqe.xmit_els_rsp.wqe_com,
+		       NO_XRI);
+		bf_set(wqe_rcvoxid, &first_iocbq->wqe.xmit_els_rsp.wqe_com,
+		       be16_to_cpu(fc_hdr->fh_ox_id));
+
+		/* put the first buffer into the first iocb */
+		tot_len = bf_get(lpfc_rcqe_length,
+				 &seq_dmabuf->cq_event.cqe.rcqe_cmpl);
+
+		first_iocbq->cmd_dmabuf = &seq_dmabuf->dbuf;
+		first_iocbq->bpl_dmabuf = NULL;
+		/* Keep track of the BDE count */
+		first_iocbq->wcqe_cmpl.word3 = 1;
+
+		if (tot_len > LPFC_DATA_BUF_SIZE)
+			first_iocbq->wqe.gen_req.bde.tus.f.bdeSize =
+				LPFC_DATA_BUF_SIZE;
+		else
+			first_iocbq->wqe.gen_req.bde.tus.f.bdeSize = tot_len;
+
+		first_iocbq->wcqe_cmpl.total_data_placed = tot_len;
+		bf_set(wqe_els_did, &first_iocbq->wqe.xmit_els_rsp.wqe_dest,
+		       sid);
+	}
+	iocbq = first_iocbq;
+	/*
+	 * Each IOCBq can have two Buffers assigned, so go through the list
+	 * of buffers for this sequence and save two buffers in each IOCBq
+	 */
+	list_for_each_entry_safe(d_buf, n_buf, &seq_dmabuf->dbuf.list, list) {
+		if (!iocbq) {
+			lpfc_in_buf_free(vport->phba, d_buf);
+			continue;
+		}
+		if (!iocbq->bpl_dmabuf) {
+			iocbq->bpl_dmabuf = d_buf;
+			iocbq->wcqe_cmpl.word3++;
+			/* We need to get the size out of the right CQE */
+			hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+			len = bf_get(lpfc_rcqe_length,
+				       &hbq_buf->cq_event.cqe.rcqe_cmpl);
+			iocbq->unsol_rcv_len = len;
+			iocbq->wcqe_cmpl.total_data_placed += len;
+			tot_len += len;
+		} else {
+			iocbq = lpfc_sli_get_iocbq(vport->phba);
+			if (!iocbq) {
+				if (first_iocbq) {
+					bf_set(lpfc_wcqe_c_status,
+					       &first_iocbq->wcqe_cmpl,
+					       IOSTAT_SUCCESS);
+					first_iocbq->wcqe_cmpl.parameter =
+						IOERR_NO_RESOURCES;
+				}
+				lpfc_in_buf_free(vport->phba, d_buf);
+				continue;
+			}
+			/* We need to get the size out of the right CQE */
+			hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+			len = bf_get(lpfc_rcqe_length,
+				       &hbq_buf->cq_event.cqe.rcqe_cmpl);
+			iocbq->cmd_dmabuf = d_buf;
+			iocbq->bpl_dmabuf = NULL;
+			iocbq->wcqe_cmpl.word3 = 1;
+
+			if (len > LPFC_DATA_BUF_SIZE)
+				iocbq->wqe.xmit_els_rsp.bde.tus.f.bdeSize =
+					LPFC_DATA_BUF_SIZE;
+			else
+				iocbq->wqe.xmit_els_rsp.bde.tus.f.bdeSize =
+					len;
+
+			tot_len += len;
+			iocbq->wcqe_cmpl.total_data_placed = tot_len;
+			bf_set(wqe_els_did, &iocbq->wqe.xmit_els_rsp.wqe_dest,
+			       sid);
+			list_add_tail(&iocbq->list, &first_iocbq->list);
+		}
+	}
+	/* Free the sequence's header buffer */
+	if (!first_iocbq)
+		lpfc_in_buf_free(vport->phba, &seq_dmabuf->dbuf);
+
+	return first_iocbq;
+}
+
+static void
+lpfc_sli4_send_seq_to_ulp(struct lpfc_vport *vport,
+			  struct hbq_dmabuf *seq_dmabuf)
+{
+	struct fc_frame_header *fc_hdr;
+	struct lpfc_iocbq *iocbq, *curr_iocb, *next_iocb;
+	struct lpfc_hba *phba = vport->phba;
+
+	fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+	iocbq = lpfc_prep_seq(vport, seq_dmabuf);
+	if (!iocbq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2707 Ring %d handler: Failed to allocate "
+				"iocb Rctl x%x Type x%x received\n",
+				LPFC_ELS_RING,
+				fc_hdr->fh_r_ctl, fc_hdr->fh_type);
+		return;
+	}
+	if (!lpfc_complete_unsol_iocb(phba,
+				      phba->sli4_hba.els_wq->pring,
+				      iocbq, fc_hdr->fh_r_ctl,
+				      fc_hdr->fh_type)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2540 Ring %d handler: unexpected Rctl "
+				"x%x Type x%x received\n",
+				LPFC_ELS_RING,
+				fc_hdr->fh_r_ctl, fc_hdr->fh_type);
+		lpfc_in_buf_free(phba, &seq_dmabuf->dbuf);
+	}
+
+	/* Free iocb created in lpfc_prep_seq */
+	list_for_each_entry_safe(curr_iocb, next_iocb,
+				 &iocbq->list, list) {
+		list_del_init(&curr_iocb->list);
+		lpfc_sli_release_iocbq(phba, curr_iocb);
+	}
+	lpfc_sli_release_iocbq(phba, iocbq);
+}
+
+static void
+lpfc_sli4_mds_loopback_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
+			    struct lpfc_iocbq *rspiocb)
+{
+	struct lpfc_dmabuf *pcmd = cmdiocb->cmd_dmabuf;
+
+	if (pcmd && pcmd->virt)
+		dma_pool_free(phba->lpfc_drb_pool, pcmd->virt, pcmd->phys);
+	kfree(pcmd);
+	lpfc_sli_release_iocbq(phba, cmdiocb);
+	lpfc_drain_txq(phba);
+}
+
+static void
+lpfc_sli4_handle_mds_loopback(struct lpfc_vport *vport,
+			      struct hbq_dmabuf *dmabuf)
+{
+	struct fc_frame_header *fc_hdr;
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_iocbq *iocbq = NULL;
+	union  lpfc_wqe128 *pwqe;
+	struct lpfc_dmabuf *pcmd = NULL;
+	uint32_t frame_len;
+	int rc;
+	unsigned long iflags;
+
+	fc_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+	frame_len = bf_get(lpfc_rcqe_length, &dmabuf->cq_event.cqe.rcqe_cmpl);
+
+	/* Send the received frame back */
+	iocbq = lpfc_sli_get_iocbq(phba);
+	if (!iocbq) {
+		/* Queue cq event and wakeup worker thread to process it */
+		spin_lock_irqsave(&phba->hbalock, iflags);
+		list_add_tail(&dmabuf->cq_event.list,
+			      &phba->sli4_hba.sp_queue_event);
+		phba->hba_flag |= HBA_SP_QUEUE_EVT;
+		spin_unlock_irqrestore(&phba->hbalock, iflags);
+		lpfc_worker_wake_up(phba);
+		return;
+	}
+
+	/* Allocate buffer for command payload */
+	pcmd = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (pcmd)
+		pcmd->virt = dma_pool_alloc(phba->lpfc_drb_pool, GFP_KERNEL,
+					    &pcmd->phys);
+	if (!pcmd || !pcmd->virt)
+		goto exit;
+
+	INIT_LIST_HEAD(&pcmd->list);
+
+	/* copyin the payload */
+	memcpy(pcmd->virt, dmabuf->dbuf.virt, frame_len);
+
+	iocbq->cmd_dmabuf = pcmd;
+	iocbq->vport = vport;
+	iocbq->cmd_flag &= ~LPFC_FIP_ELS_ID_MASK;
+	iocbq->cmd_flag |= LPFC_USE_FCPWQIDX;
+	iocbq->num_bdes = 0;
+
+	pwqe = &iocbq->wqe;
+	/* fill in BDE's for command */
+	pwqe->gen_req.bde.addrHigh = putPaddrHigh(pcmd->phys);
+	pwqe->gen_req.bde.addrLow = putPaddrLow(pcmd->phys);
+	pwqe->gen_req.bde.tus.f.bdeSize = frame_len;
+	pwqe->gen_req.bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+
+	pwqe->send_frame.frame_len = frame_len;
+	pwqe->send_frame.fc_hdr_wd0 = be32_to_cpu(*((__be32 *)fc_hdr));
+	pwqe->send_frame.fc_hdr_wd1 = be32_to_cpu(*((__be32 *)fc_hdr + 1));
+	pwqe->send_frame.fc_hdr_wd2 = be32_to_cpu(*((__be32 *)fc_hdr + 2));
+	pwqe->send_frame.fc_hdr_wd3 = be32_to_cpu(*((__be32 *)fc_hdr + 3));
+	pwqe->send_frame.fc_hdr_wd4 = be32_to_cpu(*((__be32 *)fc_hdr + 4));
+	pwqe->send_frame.fc_hdr_wd5 = be32_to_cpu(*((__be32 *)fc_hdr + 5));
+
+	pwqe->generic.wqe_com.word7 = 0;
+	pwqe->generic.wqe_com.word10 = 0;
+
+	bf_set(wqe_cmnd, &pwqe->generic.wqe_com, CMD_SEND_FRAME);
+	bf_set(wqe_sof, &pwqe->generic.wqe_com, 0x2E); /* SOF byte */
+	bf_set(wqe_eof, &pwqe->generic.wqe_com, 0x41); /* EOF byte */
+	bf_set(wqe_lenloc, &pwqe->generic.wqe_com, 1);
+	bf_set(wqe_xbl, &pwqe->generic.wqe_com, 1);
+	bf_set(wqe_dbde, &pwqe->generic.wqe_com, 1);
+	bf_set(wqe_xc, &pwqe->generic.wqe_com, 1);
+	bf_set(wqe_cmd_type, &pwqe->generic.wqe_com, 0xA);
+	bf_set(wqe_cqid, &pwqe->generic.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
+	bf_set(wqe_xri_tag, &pwqe->generic.wqe_com, iocbq->sli4_xritag);
+	bf_set(wqe_reqtag, &pwqe->generic.wqe_com, iocbq->iotag);
+	bf_set(wqe_class, &pwqe->generic.wqe_com, CLASS3);
+	pwqe->generic.wqe_com.abort_tag = iocbq->iotag;
+
+	iocbq->cmd_cmpl = lpfc_sli4_mds_loopback_cmpl;
+
+	rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocbq, 0);
+	if (rc == IOCB_ERROR)
+		goto exit;
+
+	lpfc_in_buf_free(phba, &dmabuf->dbuf);
+	return;
+
+exit:
+	lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+			"2023 Unable to process MDS loopback frame\n");
+	if (pcmd && pcmd->virt)
+		dma_pool_free(phba->lpfc_drb_pool, pcmd->virt, pcmd->phys);
+	kfree(pcmd);
+	if (iocbq)
+		lpfc_sli_release_iocbq(phba, iocbq);
+	lpfc_in_buf_free(phba, &dmabuf->dbuf);
+}
+
+/**
+ * lpfc_sli4_handle_received_buffer - Handle received buffers from firmware
+ * @phba: Pointer to HBA context object.
+ * @dmabuf: Pointer to a dmabuf that describes the FC sequence.
+ *
+ * This function is called with no lock held. This function processes all
+ * the received buffers and gives it to upper layers when a received buffer
+ * indicates that it is the final frame in the sequence. The interrupt
+ * service routine processes received buffers at interrupt contexts.
+ * Worker thread calls lpfc_sli4_handle_received_buffer, which will call the
+ * appropriate receive function when the final frame in a sequence is received.
+ **/
+void
+lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba,
+				 struct hbq_dmabuf *dmabuf)
+{
+	struct hbq_dmabuf *seq_dmabuf;
+	struct fc_frame_header *fc_hdr;
+	struct lpfc_vport *vport;
+	uint32_t fcfi;
+	uint32_t did;
+
+	/* Process each received buffer */
+	fc_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+
+	if (fc_hdr->fh_r_ctl == FC_RCTL_MDS_DIAGS ||
+	    fc_hdr->fh_r_ctl == FC_RCTL_DD_UNSOL_DATA) {
+		vport = phba->pport;
+		/* Handle MDS Loopback frames */
+		if  (!(phba->pport->load_flag & FC_UNLOADING))
+			lpfc_sli4_handle_mds_loopback(vport, dmabuf);
+		else
+			lpfc_in_buf_free(phba, &dmabuf->dbuf);
+		return;
+	}
+
+	/* check to see if this a valid type of frame */
+	if (lpfc_fc_frame_check(phba, fc_hdr)) {
+		lpfc_in_buf_free(phba, &dmabuf->dbuf);
+		return;
+	}
+
+	if ((bf_get(lpfc_cqe_code,
+		    &dmabuf->cq_event.cqe.rcqe_cmpl) == CQE_CODE_RECEIVE_V1))
+		fcfi = bf_get(lpfc_rcqe_fcf_id_v1,
+			      &dmabuf->cq_event.cqe.rcqe_cmpl);
+	else
+		fcfi = bf_get(lpfc_rcqe_fcf_id,
+			      &dmabuf->cq_event.cqe.rcqe_cmpl);
+
+	if (fc_hdr->fh_r_ctl == 0xF4 && fc_hdr->fh_type == 0xFF) {
+		vport = phba->pport;
+		lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+				"2023 MDS Loopback %d bytes\n",
+				bf_get(lpfc_rcqe_length,
+				       &dmabuf->cq_event.cqe.rcqe_cmpl));
+		/* Handle MDS Loopback frames */
+		lpfc_sli4_handle_mds_loopback(vport, dmabuf);
+		return;
+	}
+
+	/* d_id this frame is directed to */
+	did = sli4_did_from_fc_hdr(fc_hdr);
+
+	vport = lpfc_fc_frame_to_vport(phba, fc_hdr, fcfi, did);
+	if (!vport) {
+		/* throw out the frame */
+		lpfc_in_buf_free(phba, &dmabuf->dbuf);
+		return;
+	}
+
+	/* vport is registered unless we rcv a FLOGI directed to Fabric_DID */
+	if (!(vport->vpi_state & LPFC_VPI_REGISTERED) &&
+		(did != Fabric_DID)) {
+		/*
+		 * Throw out the frame if we are not pt2pt.
+		 * The pt2pt protocol allows for discovery frames
+		 * to be received without a registered VPI.
+		 */
+		if (!(vport->fc_flag & FC_PT2PT) ||
+			(phba->link_state == LPFC_HBA_READY)) {
+			lpfc_in_buf_free(phba, &dmabuf->dbuf);
+			return;
+		}
+	}
+
+	/* Handle the basic abort sequence (BA_ABTS) event */
+	if (fc_hdr->fh_r_ctl == FC_RCTL_BA_ABTS) {
+		lpfc_sli4_handle_unsol_abort(vport, dmabuf);
+		return;
+	}
+
+	/* Link this frame */
+	seq_dmabuf = lpfc_fc_frame_add(vport, dmabuf);
+	if (!seq_dmabuf) {
+		/* unable to add frame to vport - throw it out */
+		lpfc_in_buf_free(phba, &dmabuf->dbuf);
+		return;
+	}
+	/* If not last frame in sequence continue processing frames. */
+	if (!lpfc_seq_complete(seq_dmabuf))
+		return;
+
+	/* Send the complete sequence to the upper layer protocol */
+	lpfc_sli4_send_seq_to_ulp(vport, seq_dmabuf);
+}
+
+/**
+ * lpfc_sli4_post_all_rpi_hdrs - Post the rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec.  This routine
+ * posts a SLI4_PAGE_SIZE memory region to the port to hold up to
+ * SLI4_PAGE_SIZE modulo 64 rpi context headers.
+ *
+ * This routine does not require any locks.  It's usage is expected
+ * to be driver load or reset recovery when the driver is
+ * sequential.
+ *
+ * Return codes
+ * 	0 - successful
+ *      -EIO - The mailbox failed to complete successfully.
+ * 	When this error occurs, the driver is not guaranteed
+ *	to have any rpi regions posted to the device and
+ *	must either attempt to repost the regions or take a
+ *	fatal error.
+ **/
+int
+lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba)
+{
+	struct lpfc_rpi_hdr *rpi_page;
+	uint32_t rc = 0;
+	uint16_t lrpi = 0;
+
+	/* SLI4 ports that support extents do not require RPI headers. */
+	if (!phba->sli4_hba.rpi_hdrs_in_use)
+		goto exit;
+	if (phba->sli4_hba.extents_in_use)
+		return -EIO;
+
+	list_for_each_entry(rpi_page, &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
+		/*
+		 * Assign the rpi headers a physical rpi only if the driver
+		 * has not initialized those resources.  A port reset only
+		 * needs the headers posted.
+		 */
+		if (bf_get(lpfc_rpi_rsrc_rdy, &phba->sli4_hba.sli4_flags) !=
+		    LPFC_RPI_RSRC_RDY)
+			rpi_page->start_rpi = phba->sli4_hba.rpi_ids[lrpi];
+
+		rc = lpfc_sli4_post_rpi_hdr(phba, rpi_page);
+		if (rc != MBX_SUCCESS) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"2008 Error %d posting all rpi "
+					"headers\n", rc);
+			rc = -EIO;
+			break;
+		}
+	}
+
+ exit:
+	bf_set(lpfc_rpi_rsrc_rdy, &phba->sli4_hba.sli4_flags,
+	       LPFC_RPI_RSRC_RDY);
+	return rc;
+}
+
+/**
+ * lpfc_sli4_post_rpi_hdr - Post an rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ * @rpi_page:  pointer to the rpi memory region.
+ *
+ * This routine is invoked to post a single rpi header to the
+ * HBA consistent with the SLI-4 interface spec.  This memory region
+ * maps up to 64 rpi context regions.
+ *
+ * Return codes
+ * 	0 - successful
+ * 	-ENOMEM - No available memory
+ *      -EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page)
+{
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_mbx_post_hdr_tmpl *hdr_tmpl;
+	uint32_t rc = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+
+	/* SLI4 ports that support extents do not require RPI headers. */
+	if (!phba->sli4_hba.rpi_hdrs_in_use)
+		return rc;
+	if (phba->sli4_hba.extents_in_use)
+		return -EIO;
+
+	/* The port is notified of the header region via a mailbox command. */
+	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2001 Unable to allocate memory for issuing "
+				"SLI_CONFIG_SPECIAL mailbox command\n");
+		return -ENOMEM;
+	}
+
+	/* Post all rpi memory regions to the port. */
+	hdr_tmpl = &mboxq->u.mqe.un.hdr_tmpl;
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE,
+			 sizeof(struct lpfc_mbx_post_hdr_tmpl) -
+			 sizeof(struct lpfc_sli4_cfg_mhdr),
+			 LPFC_SLI4_MBX_EMBED);
+
+
+	/* Post the physical rpi to the port for this rpi header. */
+	bf_set(lpfc_mbx_post_hdr_tmpl_rpi_offset, hdr_tmpl,
+	       rpi_page->start_rpi);
+	bf_set(lpfc_mbx_post_hdr_tmpl_page_cnt,
+	       hdr_tmpl, rpi_page->page_count);
+
+	hdr_tmpl->rpi_paddr_lo = putPaddrLow(rpi_page->dmabuf->phys);
+	hdr_tmpl->rpi_paddr_hi = putPaddrHigh(rpi_page->dmabuf->phys);
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	shdr = (union lpfc_sli4_cfg_shdr *) &hdr_tmpl->header.cfg_shdr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2514 POST_RPI_HDR mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		rc = -ENXIO;
+	} else {
+		/*
+		 * The next_rpi stores the next logical module-64 rpi value used
+		 * to post physical rpis in subsequent rpi postings.
+		 */
+		spin_lock_irq(&phba->hbalock);
+		phba->sli4_hba.next_rpi = rpi_page->next_rpi;
+		spin_unlock_irq(&phba->hbalock);
+	}
+	return rc;
+}
+
+/**
+ * lpfc_sli4_alloc_rpi - Get an available rpi in the device's range
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec.  This routine
+ * posts a SLI4_PAGE_SIZE memory region to the port to hold up to
+ * SLI4_PAGE_SIZE modulo 64 rpi context headers.
+ *
+ * Returns
+ * 	A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful
+ * 	LPFC_RPI_ALLOC_ERROR if no rpis are available.
+ **/
+int
+lpfc_sli4_alloc_rpi(struct lpfc_hba *phba)
+{
+	unsigned long rpi;
+	uint16_t max_rpi, rpi_limit;
+	uint16_t rpi_remaining, lrpi = 0;
+	struct lpfc_rpi_hdr *rpi_hdr;
+	unsigned long iflag;
+
+	/*
+	 * Fetch the next logical rpi.  Because this index is logical,
+	 * the  driver starts at 0 each time.
+	 */
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	max_rpi = phba->sli4_hba.max_cfg_param.max_rpi;
+	rpi_limit = phba->sli4_hba.next_rpi;
+
+	rpi = find_first_zero_bit(phba->sli4_hba.rpi_bmask, rpi_limit);
+	if (rpi >= rpi_limit)
+		rpi = LPFC_RPI_ALLOC_ERROR;
+	else {
+		set_bit(rpi, phba->sli4_hba.rpi_bmask);
+		phba->sli4_hba.max_cfg_param.rpi_used++;
+		phba->sli4_hba.rpi_count++;
+	}
+	lpfc_printf_log(phba, KERN_INFO,
+			LOG_NODE | LOG_DISCOVERY,
+			"0001 Allocated rpi:x%x max:x%x lim:x%x\n",
+			(int) rpi, max_rpi, rpi_limit);
+
+	/*
+	 * Don't try to allocate more rpi header regions if the device limit
+	 * has been exhausted.
+	 */
+	if ((rpi == LPFC_RPI_ALLOC_ERROR) &&
+	    (phba->sli4_hba.rpi_count >= max_rpi)) {
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		return rpi;
+	}
+
+	/*
+	 * RPI header postings are not required for SLI4 ports capable of
+	 * extents.
+	 */
+	if (!phba->sli4_hba.rpi_hdrs_in_use) {
+		spin_unlock_irqrestore(&phba->hbalock, iflag);
+		return rpi;
+	}
+
+	/*
+	 * If the driver is running low on rpi resources, allocate another
+	 * page now.  Note that the next_rpi value is used because
+	 * it represents how many are actually in use whereas max_rpi notes
+	 * how many are supported max by the device.
+	 */
+	rpi_remaining = phba->sli4_hba.next_rpi - phba->sli4_hba.rpi_count;
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	if (rpi_remaining < LPFC_RPI_LOW_WATER_MARK) {
+		rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
+		if (!rpi_hdr) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"2002 Error Could not grow rpi "
+					"count\n");
+		} else {
+			lrpi = rpi_hdr->start_rpi;
+			rpi_hdr->start_rpi = phba->sli4_hba.rpi_ids[lrpi];
+			lpfc_sli4_post_rpi_hdr(phba, rpi_hdr);
+		}
+	}
+
+	return rpi;
+}
+
+/**
+ * __lpfc_sli4_free_rpi - Release an rpi for reuse.
+ * @phba: pointer to lpfc hba data structure.
+ * @rpi: rpi to free
+ *
+ * This routine is invoked to release an rpi to the pool of
+ * available rpis maintained by the driver.
+ **/
+static void
+__lpfc_sli4_free_rpi(struct lpfc_hba *phba, int rpi)
+{
+	/*
+	 * if the rpi value indicates a prior unreg has already
+	 * been done, skip the unreg.
+	 */
+	if (rpi == LPFC_RPI_ALLOC_ERROR)
+		return;
+
+	if (test_and_clear_bit(rpi, phba->sli4_hba.rpi_bmask)) {
+		phba->sli4_hba.rpi_count--;
+		phba->sli4_hba.max_cfg_param.rpi_used--;
+	} else {
+		lpfc_printf_log(phba, KERN_INFO,
+				LOG_NODE | LOG_DISCOVERY,
+				"2016 rpi %x not inuse\n",
+				rpi);
+	}
+}
+
+/**
+ * lpfc_sli4_free_rpi - Release an rpi for reuse.
+ * @phba: pointer to lpfc hba data structure.
+ * @rpi: rpi to free
+ *
+ * This routine is invoked to release an rpi to the pool of
+ * available rpis maintained by the driver.
+ **/
+void
+lpfc_sli4_free_rpi(struct lpfc_hba *phba, int rpi)
+{
+	spin_lock_irq(&phba->hbalock);
+	__lpfc_sli4_free_rpi(phba, rpi);
+	spin_unlock_irq(&phba->hbalock);
+}
+
+/**
+ * lpfc_sli4_remove_rpis - Remove the rpi bitmask region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the memory region that
+ * provided rpi via a bitmask.
+ **/
+void
+lpfc_sli4_remove_rpis(struct lpfc_hba *phba)
+{
+	kfree(phba->sli4_hba.rpi_bmask);
+	kfree(phba->sli4_hba.rpi_ids);
+	bf_set(lpfc_rpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0);
+}
+
+/**
+ * lpfc_sli4_resume_rpi - Remove the rpi bitmask region
+ * @ndlp: pointer to lpfc nodelist data structure.
+ * @cmpl: completion call-back.
+ * @arg: data to load as MBox 'caller buffer information'
+ *
+ * This routine is invoked to remove the memory region that
+ * provided rpi via a bitmask.
+ **/
+int
+lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp,
+	void (*cmpl)(struct lpfc_hba *, LPFC_MBOXQ_t *), void *arg)
+{
+	LPFC_MBOXQ_t *mboxq;
+	struct lpfc_hba *phba = ndlp->phba;
+	int rc;
+
+	/* The port is notified of the header region via a mailbox command. */
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+
+	/* If cmpl assigned, then this nlp_get pairs with
+	 * lpfc_mbx_cmpl_resume_rpi.
+	 *
+	 * Else cmpl is NULL, then this nlp_get pairs with
+	 * lpfc_sli_def_mbox_cmpl.
+	 */
+	if (!lpfc_nlp_get(ndlp)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2122 %s: Failed to get nlp ref\n",
+				__func__);
+		mempool_free(mboxq, phba->mbox_mem_pool);
+		return -EIO;
+	}
+
+	/* Post all rpi memory regions to the port. */
+	lpfc_resume_rpi(mboxq, ndlp);
+	if (cmpl) {
+		mboxq->mbox_cmpl = cmpl;
+		mboxq->ctx_buf = arg;
+	} else
+		mboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	mboxq->ctx_ndlp = ndlp;
+	mboxq->vport = ndlp->vport;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2010 Resume RPI Mailbox failed "
+				"status %d, mbxStatus x%x\n", rc,
+				bf_get(lpfc_mqe_status, &mboxq->u.mqe));
+		lpfc_nlp_put(ndlp);
+		mempool_free(mboxq, phba->mbox_mem_pool);
+		return -EIO;
+	}
+	return 0;
+}
+
+/**
+ * lpfc_sli4_init_vpi - Initialize a vpi with the port
+ * @vport: Pointer to the vport for which the vpi is being initialized
+ *
+ * This routine is invoked to activate a vpi with the port.
+ *
+ * Returns:
+ *    0 success
+ *    -Evalue otherwise
+ **/
+int
+lpfc_sli4_init_vpi(struct lpfc_vport *vport)
+{
+	LPFC_MBOXQ_t *mboxq;
+	int rc = 0;
+	int retval = MBX_SUCCESS;
+	uint32_t mbox_tmo;
+	struct lpfc_hba *phba = vport->phba;
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq)
+		return -ENOMEM;
+	lpfc_init_vpi(phba, mboxq, vport->vpi);
+	mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq);
+	rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+	if (rc != MBX_SUCCESS) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
+				"2022 INIT VPI Mailbox failed "
+				"status %d, mbxStatus x%x\n", rc,
+				bf_get(lpfc_mqe_status, &mboxq->u.mqe));
+		retval = -EIO;
+	}
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, vport->phba->mbox_mem_pool);
+
+	return retval;
+}
+
+/**
+ * lpfc_mbx_cmpl_add_fcf_record - add fcf mbox completion handler.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This routine is invoked to manually add a single FCF record. The caller
+ * must pass a completely initialized FCF_Record.  This routine takes
+ * care of the nonembedded mailbox operations.
+ **/
+static void
+lpfc_mbx_cmpl_add_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	void *virt_addr;
+	union lpfc_sli4_cfg_shdr *shdr;
+	uint32_t shdr_status, shdr_add_status;
+
+	virt_addr = mboxq->sge_array->addr[0];
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr = (union lpfc_sli4_cfg_shdr *) virt_addr;
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+
+	if ((shdr_status || shdr_add_status) &&
+		(shdr_status != STATUS_FCF_IN_USE))
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"2558 ADD_FCF_RECORD mailbox failed with "
+			"status x%x add_status x%x\n",
+			shdr_status, shdr_add_status);
+
+	lpfc_sli4_mbox_cmd_free(phba, mboxq);
+}
+
+/**
+ * lpfc_sli4_add_fcf_record - Manually add an FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_record:  pointer to the initialized fcf record to add.
+ *
+ * This routine is invoked to manually add a single FCF record. The caller
+ * must pass a completely initialized FCF_Record.  This routine takes
+ * care of the nonembedded mailbox operations.
+ **/
+int
+lpfc_sli4_add_fcf_record(struct lpfc_hba *phba, struct fcf_record *fcf_record)
+{
+	int rc = 0;
+	LPFC_MBOXQ_t *mboxq;
+	uint8_t *bytep;
+	void *virt_addr;
+	struct lpfc_mbx_sge sge;
+	uint32_t alloc_len, req_len;
+	uint32_t fcfindex;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"2009 Failed to allocate mbox for ADD_FCF cmd\n");
+		return -ENOMEM;
+	}
+
+	req_len = sizeof(struct fcf_record) + sizeof(union lpfc_sli4_cfg_shdr) +
+		  sizeof(uint32_t);
+
+	/* Allocate DMA memory and set up the non-embedded mailbox command */
+	alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+				     LPFC_MBOX_OPCODE_FCOE_ADD_FCF,
+				     req_len, LPFC_SLI4_MBX_NEMBED);
+	if (alloc_len < req_len) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"2523 Allocated DMA memory size (x%x) is "
+			"less than the requested DMA memory "
+			"size (x%x)\n", alloc_len, req_len);
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		return -ENOMEM;
+	}
+
+	/*
+	 * Get the first SGE entry from the non-embedded DMA memory.  This
+	 * routine only uses a single SGE.
+	 */
+	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+	virt_addr = mboxq->sge_array->addr[0];
+	/*
+	 * Configure the FCF record for FCFI 0.  This is the driver's
+	 * hardcoded default and gets used in nonFIP mode.
+	 */
+	fcfindex = bf_get(lpfc_fcf_record_fcf_index, fcf_record);
+	bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+	lpfc_sli_pcimem_bcopy(&fcfindex, bytep, sizeof(uint32_t));
+
+	/*
+	 * Copy the fcf_index and the FCF Record Data. The data starts after
+	 * the FCoE header plus word10. The data copy needs to be endian
+	 * correct.
+	 */
+	bytep += sizeof(uint32_t);
+	lpfc_sli_pcimem_bcopy(fcf_record, bytep, sizeof(struct fcf_record));
+	mboxq->vport = phba->pport;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_add_fcf_record;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"2515 ADD_FCF_RECORD mailbox failed with "
+			"status 0x%x\n", rc);
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		rc = -EIO;
+	} else
+		rc = 0;
+
+	return rc;
+}
+
+/**
+ * lpfc_sli4_build_dflt_fcf_record - Build the driver's default FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_record:  pointer to the fcf record to write the default data.
+ * @fcf_index: FCF table entry index.
+ *
+ * This routine is invoked to build the driver's default FCF record.  The
+ * values used are hardcoded.  This routine handles memory initialization.
+ *
+ **/
+void
+lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *phba,
+				struct fcf_record *fcf_record,
+				uint16_t fcf_index)
+{
+	memset(fcf_record, 0, sizeof(struct fcf_record));
+	fcf_record->max_rcv_size = LPFC_FCOE_MAX_RCV_SIZE;
+	fcf_record->fka_adv_period = LPFC_FCOE_FKA_ADV_PER;
+	fcf_record->fip_priority = LPFC_FCOE_FIP_PRIORITY;
+	bf_set(lpfc_fcf_record_mac_0, fcf_record, phba->fc_map[0]);
+	bf_set(lpfc_fcf_record_mac_1, fcf_record, phba->fc_map[1]);
+	bf_set(lpfc_fcf_record_mac_2, fcf_record, phba->fc_map[2]);
+	bf_set(lpfc_fcf_record_mac_3, fcf_record, LPFC_FCOE_FCF_MAC3);
+	bf_set(lpfc_fcf_record_mac_4, fcf_record, LPFC_FCOE_FCF_MAC4);
+	bf_set(lpfc_fcf_record_mac_5, fcf_record, LPFC_FCOE_FCF_MAC5);
+	bf_set(lpfc_fcf_record_fc_map_0, fcf_record, phba->fc_map[0]);
+	bf_set(lpfc_fcf_record_fc_map_1, fcf_record, phba->fc_map[1]);
+	bf_set(lpfc_fcf_record_fc_map_2, fcf_record, phba->fc_map[2]);
+	bf_set(lpfc_fcf_record_fcf_valid, fcf_record, 1);
+	bf_set(lpfc_fcf_record_fcf_avail, fcf_record, 1);
+	bf_set(lpfc_fcf_record_fcf_index, fcf_record, fcf_index);
+	bf_set(lpfc_fcf_record_mac_addr_prov, fcf_record,
+		LPFC_FCF_FPMA | LPFC_FCF_SPMA);
+	/* Set the VLAN bit map */
+	if (phba->valid_vlan) {
+		fcf_record->vlan_bitmap[phba->vlan_id / 8]
+			= 1 << (phba->vlan_id % 8);
+	}
+}
+
+/**
+ * lpfc_sli4_fcf_scan_read_fcf_rec - Read hba fcf record for fcf scan.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_index: FCF table entry offset.
+ *
+ * This routine is invoked to scan the entire FCF table by reading FCF
+ * record and processing it one at a time starting from the @fcf_index
+ * for initial FCF discovery or fast FCF failover rediscovery.
+ *
+ * Return 0 if the mailbox command is submitted successfully, none 0
+ * otherwise.
+ **/
+int
+lpfc_sli4_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, uint16_t fcf_index)
+{
+	int rc = 0, error;
+	LPFC_MBOXQ_t *mboxq;
+
+	phba->fcoe_eventtag_at_fcf_scan = phba->fcoe_eventtag;
+	phba->fcoe_cvl_eventtag_attn = phba->fcoe_cvl_eventtag;
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2000 Failed to allocate mbox for "
+				"READ_FCF cmd\n");
+		error = -ENOMEM;
+		goto fail_fcf_scan;
+	}
+	/* Construct the read FCF record mailbox command */
+	rc = lpfc_sli4_mbx_read_fcf_rec(phba, mboxq, fcf_index);
+	if (rc) {
+		error = -EINVAL;
+		goto fail_fcf_scan;
+	}
+	/* Issue the mailbox command asynchronously */
+	mboxq->vport = phba->pport;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_fcf_scan_read_fcf_rec;
+
+	spin_lock_irq(&phba->hbalock);
+	phba->hba_flag |= FCF_TS_INPROG;
+	spin_unlock_irq(&phba->hbalock);
+
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED)
+		error = -EIO;
+	else {
+		/* Reset eligible FCF count for new scan */
+		if (fcf_index == LPFC_FCOE_FCF_GET_FIRST)
+			phba->fcf.eligible_fcf_cnt = 0;
+		error = 0;
+	}
+fail_fcf_scan:
+	if (error) {
+		if (mboxq)
+			lpfc_sli4_mbox_cmd_free(phba, mboxq);
+		/* FCF scan failed, clear FCF_TS_INPROG flag */
+		spin_lock_irq(&phba->hbalock);
+		phba->hba_flag &= ~FCF_TS_INPROG;
+		spin_unlock_irq(&phba->hbalock);
+	}
+	return error;
+}
+
+/**
+ * lpfc_sli4_fcf_rr_read_fcf_rec - Read hba fcf record for roundrobin fcf.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_index: FCF table entry offset.
+ *
+ * This routine is invoked to read an FCF record indicated by @fcf_index
+ * and to use it for FLOGI roundrobin FCF failover.
+ *
+ * Return 0 if the mailbox command is submitted successfully, none 0
+ * otherwise.
+ **/
+int
+lpfc_sli4_fcf_rr_read_fcf_rec(struct lpfc_hba *phba, uint16_t fcf_index)
+{
+	int rc = 0, error;
+	LPFC_MBOXQ_t *mboxq;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_INIT,
+				"2763 Failed to allocate mbox for "
+				"READ_FCF cmd\n");
+		error = -ENOMEM;
+		goto fail_fcf_read;
+	}
+	/* Construct the read FCF record mailbox command */
+	rc = lpfc_sli4_mbx_read_fcf_rec(phba, mboxq, fcf_index);
+	if (rc) {
+		error = -EINVAL;
+		goto fail_fcf_read;
+	}
+	/* Issue the mailbox command asynchronously */
+	mboxq->vport = phba->pport;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_fcf_rr_read_fcf_rec;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED)
+		error = -EIO;
+	else
+		error = 0;
+
+fail_fcf_read:
+	if (error && mboxq)
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	return error;
+}
+
+/**
+ * lpfc_sli4_read_fcf_rec - Read hba fcf record for update eligible fcf bmask.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_index: FCF table entry offset.
+ *
+ * This routine is invoked to read an FCF record indicated by @fcf_index to
+ * determine whether it's eligible for FLOGI roundrobin failover list.
+ *
+ * Return 0 if the mailbox command is submitted successfully, none 0
+ * otherwise.
+ **/
+int
+lpfc_sli4_read_fcf_rec(struct lpfc_hba *phba, uint16_t fcf_index)
+{
+	int rc = 0, error;
+	LPFC_MBOXQ_t *mboxq;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_INIT,
+				"2758 Failed to allocate mbox for "
+				"READ_FCF cmd\n");
+				error = -ENOMEM;
+				goto fail_fcf_read;
+	}
+	/* Construct the read FCF record mailbox command */
+	rc = lpfc_sli4_mbx_read_fcf_rec(phba, mboxq, fcf_index);
+	if (rc) {
+		error = -EINVAL;
+		goto fail_fcf_read;
+	}
+	/* Issue the mailbox command asynchronously */
+	mboxq->vport = phba->pport;
+	mboxq->mbox_cmpl = lpfc_mbx_cmpl_read_fcf_rec;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED)
+		error = -EIO;
+	else
+		error = 0;
+
+fail_fcf_read:
+	if (error && mboxq)
+		lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	return error;
+}
+
+/**
+ * lpfc_check_next_fcf_pri_level
+ * @phba: pointer to the lpfc_hba struct for this port.
+ * This routine is called from the lpfc_sli4_fcf_rr_next_index_get
+ * routine when the rr_bmask is empty. The FCF indecies are put into the
+ * rr_bmask based on their priority level. Starting from the highest priority
+ * to the lowest. The most likely FCF candidate will be in the highest
+ * priority group. When this routine is called it searches the fcf_pri list for
+ * next lowest priority group and repopulates the rr_bmask with only those
+ * fcf_indexes.
+ * returns:
+ * 1=success 0=failure
+ **/
+static int
+lpfc_check_next_fcf_pri_level(struct lpfc_hba *phba)
+{
+	uint16_t next_fcf_pri;
+	uint16_t last_index;
+	struct lpfc_fcf_pri *fcf_pri;
+	int rc;
+	int ret = 0;
+
+	last_index = find_first_bit(phba->fcf.fcf_rr_bmask,
+			LPFC_SLI4_FCF_TBL_INDX_MAX);
+	lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
+			"3060 Last IDX %d\n", last_index);
+
+	/* Verify the priority list has 2 or more entries */
+	spin_lock_irq(&phba->hbalock);
+	if (list_empty(&phba->fcf.fcf_pri_list) ||
+	    list_is_singular(&phba->fcf.fcf_pri_list)) {
+		spin_unlock_irq(&phba->hbalock);
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
+			"3061 Last IDX %d\n", last_index);
+		return 0; /* Empty rr list */
+	}
+	spin_unlock_irq(&phba->hbalock);
+
+	next_fcf_pri = 0;
+	/*
+	 * Clear the rr_bmask and set all of the bits that are at this
+	 * priority.
+	 */
+	memset(phba->fcf.fcf_rr_bmask, 0,
+			sizeof(*phba->fcf.fcf_rr_bmask));
+	spin_lock_irq(&phba->hbalock);
+	list_for_each_entry(fcf_pri, &phba->fcf.fcf_pri_list, list) {
+		if (fcf_pri->fcf_rec.flag & LPFC_FCF_FLOGI_FAILED)
+			continue;
+		/*
+		 * the 1st priority that has not FLOGI failed
+		 * will be the highest.
+		 */
+		if (!next_fcf_pri)
+			next_fcf_pri = fcf_pri->fcf_rec.priority;
+		spin_unlock_irq(&phba->hbalock);
+		if (fcf_pri->fcf_rec.priority == next_fcf_pri) {
+			rc = lpfc_sli4_fcf_rr_index_set(phba,
+						fcf_pri->fcf_rec.fcf_index);
+			if (rc)
+				return 0;
+		}
+		spin_lock_irq(&phba->hbalock);
+	}
+	/*
+	 * if next_fcf_pri was not set above and the list is not empty then
+	 * we have failed flogis on all of them. So reset flogi failed
+	 * and start at the beginning.
+	 */
+	if (!next_fcf_pri && !list_empty(&phba->fcf.fcf_pri_list)) {
+		list_for_each_entry(fcf_pri, &phba->fcf.fcf_pri_list, list) {
+			fcf_pri->fcf_rec.flag &= ~LPFC_FCF_FLOGI_FAILED;
+			/*
+			 * the 1st priority that has not FLOGI failed
+			 * will be the highest.
+			 */
+			if (!next_fcf_pri)
+				next_fcf_pri = fcf_pri->fcf_rec.priority;
+			spin_unlock_irq(&phba->hbalock);
+			if (fcf_pri->fcf_rec.priority == next_fcf_pri) {
+				rc = lpfc_sli4_fcf_rr_index_set(phba,
+						fcf_pri->fcf_rec.fcf_index);
+				if (rc)
+					return 0;
+			}
+			spin_lock_irq(&phba->hbalock);
+		}
+	} else
+		ret = 1;
+	spin_unlock_irq(&phba->hbalock);
+
+	return ret;
+}
+/**
+ * lpfc_sli4_fcf_rr_next_index_get - Get next eligible fcf record index
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to get the next eligible FCF record index in a round
+ * robin fashion. If the next eligible FCF record index equals to the
+ * initial roundrobin FCF record index, LPFC_FCOE_FCF_NEXT_NONE (0xFFFF)
+ * shall be returned, otherwise, the next eligible FCF record's index
+ * shall be returned.
+ **/
+uint16_t
+lpfc_sli4_fcf_rr_next_index_get(struct lpfc_hba *phba)
+{
+	uint16_t next_fcf_index;
+
+initial_priority:
+	/* Search start from next bit of currently registered FCF index */
+	next_fcf_index = phba->fcf.current_rec.fcf_indx;
+
+next_priority:
+	/* Determine the next fcf index to check */
+	next_fcf_index = (next_fcf_index + 1) % LPFC_SLI4_FCF_TBL_INDX_MAX;
+	next_fcf_index = find_next_bit(phba->fcf.fcf_rr_bmask,
+				       LPFC_SLI4_FCF_TBL_INDX_MAX,
+				       next_fcf_index);
+
+	/* Wrap around condition on phba->fcf.fcf_rr_bmask */
+	if (next_fcf_index >= LPFC_SLI4_FCF_TBL_INDX_MAX) {
+		/*
+		 * If we have wrapped then we need to clear the bits that
+		 * have been tested so that we can detect when we should
+		 * change the priority level.
+		 */
+		next_fcf_index = find_first_bit(phba->fcf.fcf_rr_bmask,
+					       LPFC_SLI4_FCF_TBL_INDX_MAX);
+	}
+
+
+	/* Check roundrobin failover list empty condition */
+	if (next_fcf_index >= LPFC_SLI4_FCF_TBL_INDX_MAX ||
+		next_fcf_index == phba->fcf.current_rec.fcf_indx) {
+		/*
+		 * If next fcf index is not found check if there are lower
+		 * Priority level fcf's in the fcf_priority list.
+		 * Set up the rr_bmask with all of the avaiable fcf bits
+		 * at that level and continue the selection process.
+		 */
+		if (lpfc_check_next_fcf_pri_level(phba))
+			goto initial_priority;
+		lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
+				"2844 No roundrobin failover FCF available\n");
+
+		return LPFC_FCOE_FCF_NEXT_NONE;
+	}
+
+	if (next_fcf_index < LPFC_SLI4_FCF_TBL_INDX_MAX &&
+		phba->fcf.fcf_pri[next_fcf_index].fcf_rec.flag &
+		LPFC_FCF_FLOGI_FAILED) {
+		if (list_is_singular(&phba->fcf.fcf_pri_list))
+			return LPFC_FCOE_FCF_NEXT_NONE;
+
+		goto next_priority;
+	}
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
+			"2845 Get next roundrobin failover FCF (x%x)\n",
+			next_fcf_index);
+
+	return next_fcf_index;
+}
+
+/**
+ * lpfc_sli4_fcf_rr_index_set - Set bmask with eligible fcf record index
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_index: index into the FCF table to 'set'
+ *
+ * This routine sets the FCF record index in to the eligible bmask for
+ * roundrobin failover search. It checks to make sure that the index
+ * does not go beyond the range of the driver allocated bmask dimension
+ * before setting the bit.
+ *
+ * Returns 0 if the index bit successfully set, otherwise, it returns
+ * -EINVAL.
+ **/
+int
+lpfc_sli4_fcf_rr_index_set(struct lpfc_hba *phba, uint16_t fcf_index)
+{
+	if (fcf_index >= LPFC_SLI4_FCF_TBL_INDX_MAX) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
+				"2610 FCF (x%x) reached driver's book "
+				"keeping dimension:x%x\n",
+				fcf_index, LPFC_SLI4_FCF_TBL_INDX_MAX);
+		return -EINVAL;
+	}
+	/* Set the eligible FCF record index bmask */
+	set_bit(fcf_index, phba->fcf.fcf_rr_bmask);
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
+			"2790 Set FCF (x%x) to roundrobin FCF failover "
+			"bmask\n", fcf_index);
+
+	return 0;
+}
+
+/**
+ * lpfc_sli4_fcf_rr_index_clear - Clear bmask from eligible fcf record index
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_index: index into the FCF table to 'clear'
+ *
+ * This routine clears the FCF record index from the eligible bmask for
+ * roundrobin failover search. It checks to make sure that the index
+ * does not go beyond the range of the driver allocated bmask dimension
+ * before clearing the bit.
+ **/
+void
+lpfc_sli4_fcf_rr_index_clear(struct lpfc_hba *phba, uint16_t fcf_index)
+{
+	struct lpfc_fcf_pri *fcf_pri, *fcf_pri_next;
+	if (fcf_index >= LPFC_SLI4_FCF_TBL_INDX_MAX) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
+				"2762 FCF (x%x) reached driver's book "
+				"keeping dimension:x%x\n",
+				fcf_index, LPFC_SLI4_FCF_TBL_INDX_MAX);
+		return;
+	}
+	/* Clear the eligible FCF record index bmask */
+	spin_lock_irq(&phba->hbalock);
+	list_for_each_entry_safe(fcf_pri, fcf_pri_next, &phba->fcf.fcf_pri_list,
+				 list) {
+		if (fcf_pri->fcf_rec.fcf_index == fcf_index) {
+			list_del_init(&fcf_pri->list);
+			break;
+		}
+	}
+	spin_unlock_irq(&phba->hbalock);
+	clear_bit(fcf_index, phba->fcf.fcf_rr_bmask);
+
+	lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
+			"2791 Clear FCF (x%x) from roundrobin failover "
+			"bmask\n", fcf_index);
+}
+
+/**
+ * lpfc_mbx_cmpl_redisc_fcf_table - completion routine for rediscover FCF table
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: An allocated pointer to type LPFC_MBOXQ_t
+ *
+ * This routine is the completion routine for the rediscover FCF table mailbox
+ * command. If the mailbox command returned failure, it will try to stop the
+ * FCF rediscover wait timer.
+ **/
+static void
+lpfc_mbx_cmpl_redisc_fcf_table(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
+{
+	struct lpfc_mbx_redisc_fcf_tbl *redisc_fcf;
+	uint32_t shdr_status, shdr_add_status;
+
+	redisc_fcf = &mbox->u.mqe.un.redisc_fcf_tbl;
+
+	shdr_status = bf_get(lpfc_mbox_hdr_status,
+			     &redisc_fcf->header.cfg_shdr.response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+			     &redisc_fcf->header.cfg_shdr.response);
+	if (shdr_status || shdr_add_status) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
+				"2746 Requesting for FCF rediscovery failed "
+				"status x%x add_status x%x\n",
+				shdr_status, shdr_add_status);
+		if (phba->fcf.fcf_flag & FCF_ACVL_DISC) {
+			spin_lock_irq(&phba->hbalock);
+			phba->fcf.fcf_flag &= ~FCF_ACVL_DISC;
+			spin_unlock_irq(&phba->hbalock);
+			/*
+			 * CVL event triggered FCF rediscover request failed,
+			 * last resort to re-try current registered FCF entry.
+			 */
+			lpfc_retry_pport_discovery(phba);
+		} else {
+			spin_lock_irq(&phba->hbalock);
+			phba->fcf.fcf_flag &= ~FCF_DEAD_DISC;
+			spin_unlock_irq(&phba->hbalock);
+			/*
+			 * DEAD FCF event triggered FCF rediscover request
+			 * failed, last resort to fail over as a link down
+			 * to FCF registration.
+			 */
+			lpfc_sli4_fcf_dead_failthrough(phba);
+		}
+	} else {
+		lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
+				"2775 Start FCF rediscover quiescent timer\n");
+		/*
+		 * Start FCF rediscovery wait timer for pending FCF
+		 * before rescan FCF record table.
+		 */
+		lpfc_fcf_redisc_wait_start_timer(phba);
+	}
+
+	mempool_free(mbox, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_redisc_fcf_table - Request to rediscover entire FCF table by port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to request for rediscovery of the entire FCF table
+ * by the port.
+ **/
+int
+lpfc_sli4_redisc_fcf_table(struct lpfc_hba *phba)
+{
+	LPFC_MBOXQ_t *mbox;
+	struct lpfc_mbx_redisc_fcf_tbl *redisc_fcf;
+	int rc, length;
+
+	/* Cancel retry delay timers to all vports before FCF rediscover */
+	lpfc_cancel_all_vport_retry_delay_timer(phba);
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2745 Failed to allocate mbox for "
+				"requesting FCF rediscover.\n");
+		return -ENOMEM;
+	}
+
+	length = (sizeof(struct lpfc_mbx_redisc_fcf_tbl) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_REDISCOVER_FCF,
+			 length, LPFC_SLI4_MBX_EMBED);
+
+	redisc_fcf = &mbox->u.mqe.un.redisc_fcf_tbl;
+	/* Set count to 0 for invalidating the entire FCF database */
+	bf_set(lpfc_mbx_redisc_fcf_count, redisc_fcf, 0);
+
+	/* Issue the mailbox command asynchronously */
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_mbx_cmpl_redisc_fcf_table;
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+
+	if (rc == MBX_NOT_FINISHED) {
+		mempool_free(mbox, phba->mbox_mem_pool);
+		return -EIO;
+	}
+	return 0;
+}
+
+/**
+ * lpfc_sli4_fcf_dead_failthrough - Failthrough routine to fcf dead event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This function is the failover routine as a last resort to the FCF DEAD
+ * event when driver failed to perform fast FCF failover.
+ **/
+void
+lpfc_sli4_fcf_dead_failthrough(struct lpfc_hba *phba)
+{
+	uint32_t link_state;
+
+	/*
+	 * Last resort as FCF DEAD event failover will treat this as
+	 * a link down, but save the link state because we don't want
+	 * it to be changed to Link Down unless it is already down.
+	 */
+	link_state = phba->link_state;
+	lpfc_linkdown(phba);
+	phba->link_state = link_state;
+
+	/* Unregister FCF if no devices connected to it */
+	lpfc_unregister_unused_fcf(phba);
+}
+
+/**
+ * lpfc_sli_get_config_region23 - Get sli3 port region 23 data.
+ * @phba: pointer to lpfc hba data structure.
+ * @rgn23_data: pointer to configure region 23 data.
+ *
+ * This function gets SLI3 port configure region 23 data through memory dump
+ * mailbox command. When it successfully retrieves data, the size of the data
+ * will be returned, otherwise, 0 will be returned.
+ **/
+static uint32_t
+lpfc_sli_get_config_region23(struct lpfc_hba *phba, char *rgn23_data)
+{
+	LPFC_MBOXQ_t *pmb = NULL;
+	MAILBOX_t *mb;
+	uint32_t offset = 0;
+	int rc;
+
+	if (!rgn23_data)
+		return 0;
+
+	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2600 failed to allocate mailbox memory\n");
+		return 0;
+	}
+	mb = &pmb->u.mb;
+
+	do {
+		lpfc_dump_mem(phba, pmb, offset, DMP_REGION_23);
+		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+
+		if (rc != MBX_SUCCESS) {
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"2601 failed to read config "
+					"region 23, rc 0x%x Status 0x%x\n",
+					rc, mb->mbxStatus);
+			mb->un.varDmp.word_cnt = 0;
+		}
+		/*
+		 * dump mem may return a zero when finished or we got a
+		 * mailbox error, either way we are done.
+		 */
+		if (mb->un.varDmp.word_cnt == 0)
+			break;
+
+		if (mb->un.varDmp.word_cnt > DMP_RGN23_SIZE - offset)
+			mb->un.varDmp.word_cnt = DMP_RGN23_SIZE - offset;
+
+		lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
+				       rgn23_data + offset,
+				       mb->un.varDmp.word_cnt);
+		offset += mb->un.varDmp.word_cnt;
+	} while (mb->un.varDmp.word_cnt && offset < DMP_RGN23_SIZE);
+
+	mempool_free(pmb, phba->mbox_mem_pool);
+	return offset;
+}
+
+/**
+ * lpfc_sli4_get_config_region23 - Get sli4 port region 23 data.
+ * @phba: pointer to lpfc hba data structure.
+ * @rgn23_data: pointer to configure region 23 data.
+ *
+ * This function gets SLI4 port configure region 23 data through memory dump
+ * mailbox command. When it successfully retrieves data, the size of the data
+ * will be returned, otherwise, 0 will be returned.
+ **/
+static uint32_t
+lpfc_sli4_get_config_region23(struct lpfc_hba *phba, char *rgn23_data)
+{
+	LPFC_MBOXQ_t *mboxq = NULL;
+	struct lpfc_dmabuf *mp = NULL;
+	struct lpfc_mqe *mqe;
+	uint32_t data_length = 0;
+	int rc;
+
+	if (!rgn23_data)
+		return 0;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"3105 failed to allocate mailbox memory\n");
+		return 0;
+	}
+
+	if (lpfc_sli4_dump_cfg_rg23(phba, mboxq))
+		goto out;
+	mqe = &mboxq->u.mqe;
+	mp = (struct lpfc_dmabuf *)mboxq->ctx_buf;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	if (rc)
+		goto out;
+	data_length = mqe->un.mb_words[5];
+	if (data_length == 0)
+		goto out;
+	if (data_length > DMP_RGN23_SIZE) {
+		data_length = 0;
+		goto out;
+	}
+	lpfc_sli_pcimem_bcopy((char *)mp->virt, rgn23_data, data_length);
+out:
+	lpfc_mbox_rsrc_cleanup(phba, mboxq, MBOX_THD_UNLOCKED);
+	return data_length;
+}
+
+/**
+ * lpfc_sli_read_link_ste - Read region 23 to decide if link is disabled.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This function read region 23 and parse TLV for port status to
+ * decide if the user disaled the port. If the TLV indicates the
+ * port is disabled, the hba_flag is set accordingly.
+ **/
+void
+lpfc_sli_read_link_ste(struct lpfc_hba *phba)
+{
+	uint8_t *rgn23_data = NULL;
+	uint32_t if_type, data_size, sub_tlv_len, tlv_offset;
+	uint32_t offset = 0;
+
+	/* Get adapter Region 23 data */
+	rgn23_data = kzalloc(DMP_RGN23_SIZE, GFP_KERNEL);
+	if (!rgn23_data)
+		goto out;
+
+	if (phba->sli_rev < LPFC_SLI_REV4)
+		data_size = lpfc_sli_get_config_region23(phba, rgn23_data);
+	else {
+		if_type = bf_get(lpfc_sli_intf_if_type,
+				 &phba->sli4_hba.sli_intf);
+		if (if_type == LPFC_SLI_INTF_IF_TYPE_0)
+			goto out;
+		data_size = lpfc_sli4_get_config_region23(phba, rgn23_data);
+	}
+
+	if (!data_size)
+		goto out;
+
+	/* Check the region signature first */
+	if (memcmp(&rgn23_data[offset], LPFC_REGION23_SIGNATURE, 4)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"2619 Config region 23 has bad signature\n");
+			goto out;
+	}
+	offset += 4;
+
+	/* Check the data structure version */
+	if (rgn23_data[offset] != LPFC_REGION23_VERSION) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+			"2620 Config region 23 has bad version\n");
+		goto out;
+	}
+	offset += 4;
+
+	/* Parse TLV entries in the region */
+	while (offset < data_size) {
+		if (rgn23_data[offset] == LPFC_REGION23_LAST_REC)
+			break;
+		/*
+		 * If the TLV is not driver specific TLV or driver id is
+		 * not linux driver id, skip the record.
+		 */
+		if ((rgn23_data[offset] != DRIVER_SPECIFIC_TYPE) ||
+		    (rgn23_data[offset + 2] != LINUX_DRIVER_ID) ||
+		    (rgn23_data[offset + 3] != 0)) {
+			offset += rgn23_data[offset + 1] * 4 + 4;
+			continue;
+		}
+
+		/* Driver found a driver specific TLV in the config region */
+		sub_tlv_len = rgn23_data[offset + 1] * 4;
+		offset += 4;
+		tlv_offset = 0;
+
+		/*
+		 * Search for configured port state sub-TLV.
+		 */
+		while ((offset < data_size) &&
+			(tlv_offset < sub_tlv_len)) {
+			if (rgn23_data[offset] == LPFC_REGION23_LAST_REC) {
+				offset += 4;
+				tlv_offset += 4;
+				break;
+			}
+			if (rgn23_data[offset] != PORT_STE_TYPE) {
+				offset += rgn23_data[offset + 1] * 4 + 4;
+				tlv_offset += rgn23_data[offset + 1] * 4 + 4;
+				continue;
+			}
+
+			/* This HBA contains PORT_STE configured */
+			if (!rgn23_data[offset + 2])
+				phba->hba_flag |= LINK_DISABLED;
+
+			goto out;
+		}
+	}
+
+out:
+	kfree(rgn23_data);
+	return;
+}
+
+/**
+ * lpfc_log_fw_write_cmpl - logs firmware write completion status
+ * @phba: pointer to lpfc hba data structure
+ * @shdr_status: wr_object rsp's status field
+ * @shdr_add_status: wr_object rsp's add_status field
+ * @shdr_add_status_2: wr_object rsp's add_status_2 field
+ * @shdr_change_status: wr_object rsp's change_status field
+ * @shdr_csf: wr_object rsp's csf bit
+ *
+ * This routine is intended to be called after a firmware write completes.
+ * It will log next action items to be performed by the user to instantiate
+ * the newly downloaded firmware or reason for incompatibility.
+ **/
+static void
+lpfc_log_fw_write_cmpl(struct lpfc_hba *phba, u32 shdr_status,
+		       u32 shdr_add_status, u32 shdr_add_status_2,
+		       u32 shdr_change_status, u32 shdr_csf)
+{
+	lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+			"4198 %s: flash_id x%02x, asic_rev x%02x, "
+			"status x%02x, add_status x%02x, add_status_2 x%02x, "
+			"change_status x%02x, csf %01x\n", __func__,
+			phba->sli4_hba.flash_id, phba->sli4_hba.asic_rev,
+			shdr_status, shdr_add_status, shdr_add_status_2,
+			shdr_change_status, shdr_csf);
+
+	if (shdr_add_status == LPFC_ADD_STATUS_INCOMPAT_OBJ) {
+		switch (shdr_add_status_2) {
+		case LPFC_ADD_STATUS_2_INCOMPAT_FLASH:
+			lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+					"4199 Firmware write failed: "
+					"image incompatible with flash x%02x\n",
+					phba->sli4_hba.flash_id);
+			break;
+		case LPFC_ADD_STATUS_2_INCORRECT_ASIC:
+			lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+					"4200 Firmware write failed: "
+					"image incompatible with ASIC "
+					"architecture x%02x\n",
+					phba->sli4_hba.asic_rev);
+			break;
+		default:
+			lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+					"4210 Firmware write failed: "
+					"add_status_2 x%02x\n",
+					shdr_add_status_2);
+			break;
+		}
+	} else if (!shdr_status && !shdr_add_status) {
+		if (shdr_change_status == LPFC_CHANGE_STATUS_FW_RESET ||
+		    shdr_change_status == LPFC_CHANGE_STATUS_PORT_MIGRATION) {
+			if (shdr_csf)
+				shdr_change_status =
+						   LPFC_CHANGE_STATUS_PCI_RESET;
+		}
+
+		switch (shdr_change_status) {
+		case (LPFC_CHANGE_STATUS_PHYS_DEV_RESET):
+			lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+					"3198 Firmware write complete: System "
+					"reboot required to instantiate\n");
+			break;
+		case (LPFC_CHANGE_STATUS_FW_RESET):
+			lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+					"3199 Firmware write complete: "
+					"Firmware reset required to "
+					"instantiate\n");
+			break;
+		case (LPFC_CHANGE_STATUS_PORT_MIGRATION):
+			lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+					"3200 Firmware write complete: Port "
+					"Migration or PCI Reset required to "
+					"instantiate\n");
+			break;
+		case (LPFC_CHANGE_STATUS_PCI_RESET):
+			lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+					"3201 Firmware write complete: PCI "
+					"Reset required to instantiate\n");
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+/**
+ * lpfc_wr_object - write an object to the firmware
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @dmabuf_list: list of dmabufs to write to the port.
+ * @size: the total byte value of the objects to write to the port.
+ * @offset: the current offset to be used to start the transfer.
+ *
+ * This routine will create a wr_object mailbox command to send to the port.
+ * the mailbox command will be constructed using the dma buffers described in
+ * @dmabuf_list to create a list of BDEs. This routine will fill in as many
+ * BDEs that the imbedded mailbox can support. The @offset variable will be
+ * used to indicate the starting offset of the transfer and will also return
+ * the offset after the write object mailbox has completed. @size is used to
+ * determine the end of the object and whether the eof bit should be set.
+ *
+ * Return 0 is successful and offset will contain the the new offset to use
+ * for the next write.
+ * Return negative value for error cases.
+ **/
+int
+lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list,
+	       uint32_t size, uint32_t *offset)
+{
+	struct lpfc_mbx_wr_object *wr_object;
+	LPFC_MBOXQ_t *mbox;
+	int rc = 0, i = 0;
+	int mbox_status = 0;
+	uint32_t shdr_status, shdr_add_status, shdr_add_status_2;
+	uint32_t shdr_change_status = 0, shdr_csf = 0;
+	uint32_t mbox_tmo;
+	struct lpfc_dmabuf *dmabuf;
+	uint32_t written = 0;
+	bool check_change_status = false;
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			LPFC_MBOX_OPCODE_WRITE_OBJECT,
+			sizeof(struct lpfc_mbx_wr_object) -
+			sizeof(struct lpfc_sli4_cfg_mhdr), LPFC_SLI4_MBX_EMBED);
+
+	wr_object = (struct lpfc_mbx_wr_object *)&mbox->u.mqe.un.wr_object;
+	wr_object->u.request.write_offset = *offset;
+	sprintf((uint8_t *)wr_object->u.request.object_name, "/");
+	wr_object->u.request.object_name[0] =
+		cpu_to_le32(wr_object->u.request.object_name[0]);
+	bf_set(lpfc_wr_object_eof, &wr_object->u.request, 0);
+	list_for_each_entry(dmabuf, dmabuf_list, list) {
+		if (i >= LPFC_MBX_WR_CONFIG_MAX_BDE || written >= size)
+			break;
+		wr_object->u.request.bde[i].addrLow = putPaddrLow(dmabuf->phys);
+		wr_object->u.request.bde[i].addrHigh =
+			putPaddrHigh(dmabuf->phys);
+		if (written + SLI4_PAGE_SIZE >= size) {
+			wr_object->u.request.bde[i].tus.f.bdeSize =
+				(size - written);
+			written += (size - written);
+			bf_set(lpfc_wr_object_eof, &wr_object->u.request, 1);
+			bf_set(lpfc_wr_object_eas, &wr_object->u.request, 1);
+			check_change_status = true;
+		} else {
+			wr_object->u.request.bde[i].tus.f.bdeSize =
+				SLI4_PAGE_SIZE;
+			written += SLI4_PAGE_SIZE;
+		}
+		i++;
+	}
+	wr_object->u.request.bde_count = i;
+	bf_set(lpfc_wr_object_write_length, &wr_object->u.request, written);
+	if (!phba->sli4_hba.intr_enable)
+		mbox_status = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	else {
+		mbox_tmo = lpfc_mbox_tmo_val(phba, mbox);
+		mbox_status = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+	}
+
+	/* The mbox status needs to be maintained to detect MBOX_TIMEOUT. */
+	rc = mbox_status;
+
+	/* The IOCTL status is embedded in the mailbox subheader. */
+	shdr_status = bf_get(lpfc_mbox_hdr_status,
+			     &wr_object->header.cfg_shdr.response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+				 &wr_object->header.cfg_shdr.response);
+	shdr_add_status_2 = bf_get(lpfc_mbox_hdr_add_status_2,
+				   &wr_object->header.cfg_shdr.response);
+	if (check_change_status) {
+		shdr_change_status = bf_get(lpfc_wr_object_change_status,
+					    &wr_object->u.response);
+		shdr_csf = bf_get(lpfc_wr_object_csf,
+				  &wr_object->u.response);
+	}
+
+	if (shdr_status || shdr_add_status || shdr_add_status_2 || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"3025 Write Object mailbox failed with "
+				"status x%x add_status x%x, add_status_2 x%x, "
+				"mbx status x%x\n",
+				shdr_status, shdr_add_status, shdr_add_status_2,
+				rc);
+		rc = -ENXIO;
+		*offset = shdr_add_status;
+	} else {
+		*offset += wr_object->u.response.actual_write_length;
+	}
+
+	if (rc || check_change_status)
+		lpfc_log_fw_write_cmpl(phba, shdr_status, shdr_add_status,
+				       shdr_add_status_2, shdr_change_status,
+				       shdr_csf);
+
+	if (!phba->sli4_hba.intr_enable)
+		mempool_free(mbox, phba->mbox_mem_pool);
+	else if (mbox_status != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+
+	return rc;
+}
+
+/**
+ * lpfc_cleanup_pending_mbox - Free up vport discovery mailbox commands.
+ * @vport: pointer to vport data structure.
+ *
+ * This function iterate through the mailboxq and clean up all REG_LOGIN
+ * and REG_VPI mailbox commands associated with the vport. This function
+ * is called when driver want to restart discovery of the vport due to
+ * a Clear Virtual Link event.
+ **/
+void
+lpfc_cleanup_pending_mbox(struct lpfc_vport *vport)
+{
+	struct lpfc_hba *phba = vport->phba;
+	LPFC_MBOXQ_t *mb, *nextmb;
+	struct lpfc_nodelist *ndlp;
+	struct lpfc_nodelist *act_mbx_ndlp = NULL;
+	LIST_HEAD(mbox_cmd_list);
+	uint8_t restart_loop;
+
+	/* Clean up internally queued mailbox commands with the vport */
+	spin_lock_irq(&phba->hbalock);
+	list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
+		if (mb->vport != vport)
+			continue;
+
+		if ((mb->u.mb.mbxCommand != MBX_REG_LOGIN64) &&
+			(mb->u.mb.mbxCommand != MBX_REG_VPI))
+			continue;
+
+		list_move_tail(&mb->list, &mbox_cmd_list);
+	}
+	/* Clean up active mailbox command with the vport */
+	mb = phba->sli.mbox_active;
+	if (mb && (mb->vport == vport)) {
+		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) ||
+			(mb->u.mb.mbxCommand == MBX_REG_VPI))
+			mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+		if (mb->u.mb.mbxCommand == MBX_REG_LOGIN64) {
+			act_mbx_ndlp = (struct lpfc_nodelist *)mb->ctx_ndlp;
+
+			/* This reference is local to this routine.  The
+			 * reference is removed at routine exit.
+			 */
+			act_mbx_ndlp = lpfc_nlp_get(act_mbx_ndlp);
+
+			/* Unregister the RPI when mailbox complete */
+			mb->mbox_flag |= LPFC_MBX_IMED_UNREG;
+		}
+	}
+	/* Cleanup any mailbox completions which are not yet processed */
+	do {
+		restart_loop = 0;
+		list_for_each_entry(mb, &phba->sli.mboxq_cmpl, list) {
+			/*
+			 * If this mailox is already processed or it is
+			 * for another vport ignore it.
+			 */
+			if ((mb->vport != vport) ||
+				(mb->mbox_flag & LPFC_MBX_IMED_UNREG))
+				continue;
+
+			if ((mb->u.mb.mbxCommand != MBX_REG_LOGIN64) &&
+				(mb->u.mb.mbxCommand != MBX_REG_VPI))
+				continue;
+
+			mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+			if (mb->u.mb.mbxCommand == MBX_REG_LOGIN64) {
+				ndlp = (struct lpfc_nodelist *)mb->ctx_ndlp;
+				/* Unregister the RPI when mailbox complete */
+				mb->mbox_flag |= LPFC_MBX_IMED_UNREG;
+				restart_loop = 1;
+				spin_unlock_irq(&phba->hbalock);
+				spin_lock(&ndlp->lock);
+				ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
+				spin_unlock(&ndlp->lock);
+				spin_lock_irq(&phba->hbalock);
+				break;
+			}
+		}
+	} while (restart_loop);
+
+	spin_unlock_irq(&phba->hbalock);
+
+	/* Release the cleaned-up mailbox commands */
+	while (!list_empty(&mbox_cmd_list)) {
+		list_remove_head(&mbox_cmd_list, mb, LPFC_MBOXQ_t, list);
+		if (mb->u.mb.mbxCommand == MBX_REG_LOGIN64) {
+			ndlp = (struct lpfc_nodelist *)mb->ctx_ndlp;
+			mb->ctx_ndlp = NULL;
+			if (ndlp) {
+				spin_lock(&ndlp->lock);
+				ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
+				spin_unlock(&ndlp->lock);
+				lpfc_nlp_put(ndlp);
+			}
+		}
+		lpfc_mbox_rsrc_cleanup(phba, mb, MBOX_THD_UNLOCKED);
+	}
+
+	/* Release the ndlp with the cleaned-up active mailbox command */
+	if (act_mbx_ndlp) {
+		spin_lock(&act_mbx_ndlp->lock);
+		act_mbx_ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
+		spin_unlock(&act_mbx_ndlp->lock);
+		lpfc_nlp_put(act_mbx_ndlp);
+	}
+}
+
+/**
+ * lpfc_drain_txq - Drain the txq
+ * @phba: Pointer to HBA context object.
+ *
+ * This function attempt to submit IOCBs on the txq
+ * to the adapter.  For SLI4 adapters, the txq contains
+ * ELS IOCBs that have been deferred because the there
+ * are no SGLs.  This congestion can occur with large
+ * vport counts during node discovery.
+ **/
+
+uint32_t
+lpfc_drain_txq(struct lpfc_hba *phba)
+{
+	LIST_HEAD(completions);
+	struct lpfc_sli_ring *pring;
+	struct lpfc_iocbq *piocbq = NULL;
+	unsigned long iflags = 0;
+	char *fail_msg = NULL;
+	uint32_t txq_cnt = 0;
+	struct lpfc_queue *wq;
+	int ret = 0;
+
+	if (phba->link_flag & LS_MDS_LOOPBACK) {
+		/* MDS WQE are posted only to first WQ*/
+		wq = phba->sli4_hba.hdwq[0].io_wq;
+		if (unlikely(!wq))
+			return 0;
+		pring = wq->pring;
+	} else {
+		wq = phba->sli4_hba.els_wq;
+		if (unlikely(!wq))
+			return 0;
+		pring = lpfc_phba_elsring(phba);
+	}
+
+	if (unlikely(!pring) || list_empty(&pring->txq))
+		return 0;
+
+	spin_lock_irqsave(&pring->ring_lock, iflags);
+	list_for_each_entry(piocbq, &pring->txq, list) {
+		txq_cnt++;
+	}
+
+	if (txq_cnt > pring->txq_max)
+		pring->txq_max = txq_cnt;
+
+	spin_unlock_irqrestore(&pring->ring_lock, iflags);
+
+	while (!list_empty(&pring->txq)) {
+		spin_lock_irqsave(&pring->ring_lock, iflags);
+
+		piocbq = lpfc_sli_ringtx_get(phba, pring);
+		if (!piocbq) {
+			spin_unlock_irqrestore(&pring->ring_lock, iflags);
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"2823 txq empty and txq_cnt is %d\n ",
+				txq_cnt);
+			break;
+		}
+		txq_cnt--;
+
+		ret = __lpfc_sli_issue_iocb(phba, pring->ringno, piocbq, 0);
+
+		if (ret && ret != IOCB_BUSY) {
+			fail_msg = " - Cannot send IO ";
+			piocbq->cmd_flag &= ~LPFC_DRIVER_ABORTED;
+		}
+		if (fail_msg) {
+			piocbq->cmd_flag |= LPFC_DRIVER_ABORTED;
+			/* Failed means we can't issue and need to cancel */
+			lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+					"2822 IOCB failed %s iotag 0x%x "
+					"xri 0x%x %d flg x%x\n",
+					fail_msg, piocbq->iotag,
+					piocbq->sli4_xritag, ret,
+					piocbq->cmd_flag);
+			list_add_tail(&piocbq->list, &completions);
+			fail_msg = NULL;
+		}
+		spin_unlock_irqrestore(&pring->ring_lock, iflags);
+		if (txq_cnt == 0 || ret == IOCB_BUSY)
+			break;
+	}
+	/* Cancel all the IOCBs that cannot be issued */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_ABORTED);
+
+	return txq_cnt;
+}
+
+/**
+ * lpfc_wqe_bpl2sgl - Convert the bpl/bde to a sgl.
+ * @phba: Pointer to HBA context object.
+ * @pwqeq: Pointer to command WQE.
+ * @sglq: Pointer to the scatter gather queue object.
+ *
+ * This routine converts the bpl or bde that is in the WQE
+ * to a sgl list for the sli4 hardware. The physical address
+ * of the bpl/bde is converted back to a virtual address.
+ * If the WQE contains a BPL then the list of BDE's is
+ * converted to sli4_sge's. If the WQE contains a single
+ * BDE then it is converted to a single sli_sge.
+ * The WQE is still in cpu endianness so the contents of
+ * the bpl can be used without byte swapping.
+ *
+ * Returns valid XRI = Success, NO_XRI = Failure.
+ */
+static uint16_t
+lpfc_wqe_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *pwqeq,
+		 struct lpfc_sglq *sglq)
+{
+	uint16_t xritag = NO_XRI;
+	struct ulp_bde64 *bpl = NULL;
+	struct ulp_bde64 bde;
+	struct sli4_sge *sgl  = NULL;
+	struct lpfc_dmabuf *dmabuf;
+	union lpfc_wqe128 *wqe;
+	int numBdes = 0;
+	int i = 0;
+	uint32_t offset = 0; /* accumulated offset in the sg request list */
+	int inbound = 0; /* number of sg reply entries inbound from firmware */
+	uint32_t cmd;
+
+	if (!pwqeq || !sglq)
+		return xritag;
+
+	sgl  = (struct sli4_sge *)sglq->sgl;
+	wqe = &pwqeq->wqe;
+	pwqeq->iocb.ulpIoTag = pwqeq->iotag;
+
+	cmd = bf_get(wqe_cmnd, &wqe->generic.wqe_com);
+	if (cmd == CMD_XMIT_BLS_RSP64_WQE)
+		return sglq->sli4_xritag;
+	numBdes = pwqeq->num_bdes;
+	if (numBdes) {
+		/* The addrHigh and addrLow fields within the WQE
+		 * have not been byteswapped yet so there is no
+		 * need to swap them back.
+		 */
+		if (pwqeq->bpl_dmabuf)
+			dmabuf = pwqeq->bpl_dmabuf;
+		else
+			return xritag;
+
+		bpl  = (struct ulp_bde64 *)dmabuf->virt;
+		if (!bpl)
+			return xritag;
+
+		for (i = 0; i < numBdes; i++) {
+			/* Should already be byte swapped. */
+			sgl->addr_hi = bpl->addrHigh;
+			sgl->addr_lo = bpl->addrLow;
+
+			sgl->word2 = le32_to_cpu(sgl->word2);
+			if ((i+1) == numBdes)
+				bf_set(lpfc_sli4_sge_last, sgl, 1);
+			else
+				bf_set(lpfc_sli4_sge_last, sgl, 0);
+			/* swap the size field back to the cpu so we
+			 * can assign it to the sgl.
+			 */
+			bde.tus.w = le32_to_cpu(bpl->tus.w);
+			sgl->sge_len = cpu_to_le32(bde.tus.f.bdeSize);
+			/* The offsets in the sgl need to be accumulated
+			 * separately for the request and reply lists.
+			 * The request is always first, the reply follows.
+			 */
+			switch (cmd) {
+			case CMD_GEN_REQUEST64_WQE:
+				/* add up the reply sg entries */
+				if (bpl->tus.f.bdeFlags == BUFF_TYPE_BDE_64I)
+					inbound++;
+				/* first inbound? reset the offset */
+				if (inbound == 1)
+					offset = 0;
+				bf_set(lpfc_sli4_sge_offset, sgl, offset);
+				bf_set(lpfc_sli4_sge_type, sgl,
+					LPFC_SGE_TYPE_DATA);
+				offset += bde.tus.f.bdeSize;
+				break;
+			case CMD_FCP_TRSP64_WQE:
+				bf_set(lpfc_sli4_sge_offset, sgl, 0);
+				bf_set(lpfc_sli4_sge_type, sgl,
+					LPFC_SGE_TYPE_DATA);
+				break;
+			case CMD_FCP_TSEND64_WQE:
+			case CMD_FCP_TRECEIVE64_WQE:
+				bf_set(lpfc_sli4_sge_type, sgl,
+					bpl->tus.f.bdeFlags);
+				if (i < 3)
+					offset = 0;
+				else
+					offset += bde.tus.f.bdeSize;
+				bf_set(lpfc_sli4_sge_offset, sgl, offset);
+				break;
+			}
+			sgl->word2 = cpu_to_le32(sgl->word2);
+			bpl++;
+			sgl++;
+		}
+	} else if (wqe->gen_req.bde.tus.f.bdeFlags == BUFF_TYPE_BDE_64) {
+		/* The addrHigh and addrLow fields of the BDE have not
+		 * been byteswapped yet so they need to be swapped
+		 * before putting them in the sgl.
+		 */
+		sgl->addr_hi = cpu_to_le32(wqe->gen_req.bde.addrHigh);
+		sgl->addr_lo = cpu_to_le32(wqe->gen_req.bde.addrLow);
+		sgl->word2 = le32_to_cpu(sgl->word2);
+		bf_set(lpfc_sli4_sge_last, sgl, 1);
+		sgl->word2 = cpu_to_le32(sgl->word2);
+		sgl->sge_len = cpu_to_le32(wqe->gen_req.bde.tus.f.bdeSize);
+	}
+	return sglq->sli4_xritag;
+}
+
+/**
+ * lpfc_sli4_issue_wqe - Issue an SLI4 Work Queue Entry (WQE)
+ * @phba: Pointer to HBA context object.
+ * @qp: Pointer to HDW queue.
+ * @pwqe: Pointer to command WQE.
+ **/
+int
+lpfc_sli4_issue_wqe(struct lpfc_hba *phba, struct lpfc_sli4_hdw_queue *qp,
+		    struct lpfc_iocbq *pwqe)
+{
+	union lpfc_wqe128 *wqe = &pwqe->wqe;
+	struct lpfc_async_xchg_ctx *ctxp;
+	struct lpfc_queue *wq;
+	struct lpfc_sglq *sglq;
+	struct lpfc_sli_ring *pring;
+	unsigned long iflags;
+	uint32_t ret = 0;
+
+	/* NVME_LS and NVME_LS ABTS requests. */
+	if (pwqe->cmd_flag & LPFC_IO_NVME_LS) {
+		pring =  phba->sli4_hba.nvmels_wq->pring;
+		lpfc_qp_spin_lock_irqsave(&pring->ring_lock, iflags,
+					  qp, wq_access);
+		sglq = __lpfc_sli_get_els_sglq(phba, pwqe);
+		if (!sglq) {
+			spin_unlock_irqrestore(&pring->ring_lock, iflags);
+			return WQE_BUSY;
+		}
+		pwqe->sli4_lxritag = sglq->sli4_lxritag;
+		pwqe->sli4_xritag = sglq->sli4_xritag;
+		if (lpfc_wqe_bpl2sgl(phba, pwqe, sglq) == NO_XRI) {
+			spin_unlock_irqrestore(&pring->ring_lock, iflags);
+			return WQE_ERROR;
+		}
+		bf_set(wqe_xri_tag, &pwqe->wqe.xmit_bls_rsp.wqe_com,
+		       pwqe->sli4_xritag);
+		ret = lpfc_sli4_wq_put(phba->sli4_hba.nvmels_wq, wqe);
+		if (ret) {
+			spin_unlock_irqrestore(&pring->ring_lock, iflags);
+			return ret;
+		}
+
+		lpfc_sli_ringtxcmpl_put(phba, pring, pwqe);
+		spin_unlock_irqrestore(&pring->ring_lock, iflags);
+
+		lpfc_sli4_poll_eq(qp->hba_eq, LPFC_POLL_FASTPATH);
+		return 0;
+	}
+
+	/* NVME_FCREQ and NVME_ABTS requests */
+	if (pwqe->cmd_flag & (LPFC_IO_NVME | LPFC_IO_FCP | LPFC_IO_CMF)) {
+		/* Get the IO distribution (hba_wqidx) for WQ assignment. */
+		wq = qp->io_wq;
+		pring = wq->pring;
+
+		bf_set(wqe_cqid, &wqe->generic.wqe_com, qp->io_cq_map);
+
+		lpfc_qp_spin_lock_irqsave(&pring->ring_lock, iflags,
+					  qp, wq_access);
+		ret = lpfc_sli4_wq_put(wq, wqe);
+		if (ret) {
+			spin_unlock_irqrestore(&pring->ring_lock, iflags);
+			return ret;
+		}
+		lpfc_sli_ringtxcmpl_put(phba, pring, pwqe);
+		spin_unlock_irqrestore(&pring->ring_lock, iflags);
+
+		lpfc_sli4_poll_eq(qp->hba_eq, LPFC_POLL_FASTPATH);
+		return 0;
+	}
+
+	/* NVMET requests */
+	if (pwqe->cmd_flag & LPFC_IO_NVMET) {
+		/* Get the IO distribution (hba_wqidx) for WQ assignment. */
+		wq = qp->io_wq;
+		pring = wq->pring;
+
+		ctxp = pwqe->context_un.axchg;
+		sglq = ctxp->ctxbuf->sglq;
+		if (pwqe->sli4_xritag ==  NO_XRI) {
+			pwqe->sli4_lxritag = sglq->sli4_lxritag;
+			pwqe->sli4_xritag = sglq->sli4_xritag;
+		}
+		bf_set(wqe_xri_tag, &pwqe->wqe.xmit_bls_rsp.wqe_com,
+		       pwqe->sli4_xritag);
+		bf_set(wqe_cqid, &wqe->generic.wqe_com, qp->io_cq_map);
+
+		lpfc_qp_spin_lock_irqsave(&pring->ring_lock, iflags,
+					  qp, wq_access);
+		ret = lpfc_sli4_wq_put(wq, wqe);
+		if (ret) {
+			spin_unlock_irqrestore(&pring->ring_lock, iflags);
+			return ret;
+		}
+		lpfc_sli_ringtxcmpl_put(phba, pring, pwqe);
+		spin_unlock_irqrestore(&pring->ring_lock, iflags);
+
+		lpfc_sli4_poll_eq(qp->hba_eq, LPFC_POLL_FASTPATH);
+		return 0;
+	}
+	return WQE_ERROR;
+}
+
+/**
+ * lpfc_sli4_issue_abort_iotag - SLI-4 WQE init & issue for the Abort
+ * @phba: Pointer to HBA context object.
+ * @cmdiocb: Pointer to driver command iocb object.
+ * @cmpl: completion function.
+ *
+ * Fill the appropriate fields for the abort WQE and call
+ * internal routine lpfc_sli4_issue_wqe to send the WQE
+ * This function is called with hbalock held and no ring_lock held.
+ *
+ * RETURNS 0 - SUCCESS
+ **/
+
+int
+lpfc_sli4_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
+			    void *cmpl)
+{
+	struct lpfc_vport *vport = cmdiocb->vport;
+	struct lpfc_iocbq *abtsiocb = NULL;
+	union lpfc_wqe128 *abtswqe;
+	struct lpfc_io_buf *lpfc_cmd;
+	int retval = IOCB_ERROR;
+	u16 xritag = cmdiocb->sli4_xritag;
+
+	/*
+	 * The scsi command can not be in txq and it is in flight because the
+	 * pCmd is still pointing at the SCSI command we have to abort. There
+	 * is no need to search the txcmplq. Just send an abort to the FW.
+	 */
+
+	abtsiocb = __lpfc_sli_get_iocbq(phba);
+	if (!abtsiocb)
+		return WQE_NORESOURCE;
+
+	/* Indicate the IO is being aborted by the driver. */
+	cmdiocb->cmd_flag |= LPFC_DRIVER_ABORTED;
+
+	abtswqe = &abtsiocb->wqe;
+	memset(abtswqe, 0, sizeof(*abtswqe));
+
+	if (!lpfc_is_link_up(phba) || (phba->link_flag & LS_EXTERNAL_LOOPBACK))
+		bf_set(abort_cmd_ia, &abtswqe->abort_cmd, 1);
+	bf_set(abort_cmd_criteria, &abtswqe->abort_cmd, T_XRI_TAG);
+	abtswqe->abort_cmd.rsrvd5 = 0;
+	abtswqe->abort_cmd.wqe_com.abort_tag = xritag;
+	bf_set(wqe_reqtag, &abtswqe->abort_cmd.wqe_com, abtsiocb->iotag);
+	bf_set(wqe_cmnd, &abtswqe->abort_cmd.wqe_com, CMD_ABORT_XRI_CX);
+	bf_set(wqe_xri_tag, &abtswqe->generic.wqe_com, 0);
+	bf_set(wqe_qosd, &abtswqe->abort_cmd.wqe_com, 1);
+	bf_set(wqe_lenloc, &abtswqe->abort_cmd.wqe_com, LPFC_WQE_LENLOC_NONE);
+	bf_set(wqe_cmd_type, &abtswqe->abort_cmd.wqe_com, OTHER_COMMAND);
+
+	/* ABTS WQE must go to the same WQ as the WQE to be aborted */
+	abtsiocb->hba_wqidx = cmdiocb->hba_wqidx;
+	abtsiocb->cmd_flag |= LPFC_USE_FCPWQIDX;
+	if (cmdiocb->cmd_flag & LPFC_IO_FCP)
+		abtsiocb->cmd_flag |= LPFC_IO_FCP;
+	if (cmdiocb->cmd_flag & LPFC_IO_NVME)
+		abtsiocb->cmd_flag |= LPFC_IO_NVME;
+	if (cmdiocb->cmd_flag & LPFC_IO_FOF)
+		abtsiocb->cmd_flag |= LPFC_IO_FOF;
+	abtsiocb->vport = vport;
+	abtsiocb->cmd_cmpl = cmpl;
+
+	lpfc_cmd = container_of(cmdiocb, struct lpfc_io_buf, cur_iocbq);
+	retval = lpfc_sli4_issue_wqe(phba, lpfc_cmd->hdwq, abtsiocb);
+
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_SLI | LOG_NVME_ABTS | LOG_FCP,
+			 "0359 Abort xri x%x, original iotag x%x, "
+			 "abort cmd iotag x%x retval x%x\n",
+			 xritag, cmdiocb->iotag, abtsiocb->iotag, retval);
+
+	if (retval) {
+		cmdiocb->cmd_flag &= ~LPFC_DRIVER_ABORTED;
+		__lpfc_sli_release_iocbq(phba, abtsiocb);
+	}
+
+	return retval;
+}
+
+#ifdef LPFC_MXP_STAT
+/**
+ * lpfc_snapshot_mxp - Snapshot pbl, pvt and busy count
+ * @phba: pointer to lpfc hba data structure.
+ * @hwqid: belong to which HWQ.
+ *
+ * The purpose of this routine is to take a snapshot of pbl, pvt and busy count
+ * 15 seconds after a test case is running.
+ *
+ * The user should call lpfc_debugfs_multixripools_write before running a test
+ * case to clear stat_snapshot_taken. Then the user starts a test case. During
+ * test case is running, stat_snapshot_taken is incremented by 1 every time when
+ * this routine is called from heartbeat timer. When stat_snapshot_taken is
+ * equal to LPFC_MXP_SNAPSHOT_TAKEN, a snapshot is taken.
+ **/
+void lpfc_snapshot_mxp(struct lpfc_hba *phba, u32 hwqid)
+{
+	struct lpfc_sli4_hdw_queue *qp;
+	struct lpfc_multixri_pool *multixri_pool;
+	struct lpfc_pvt_pool *pvt_pool;
+	struct lpfc_pbl_pool *pbl_pool;
+	u32 txcmplq_cnt;
+
+	qp = &phba->sli4_hba.hdwq[hwqid];
+	multixri_pool = qp->p_multixri_pool;
+	if (!multixri_pool)
+		return;
+
+	if (multixri_pool->stat_snapshot_taken == LPFC_MXP_SNAPSHOT_TAKEN) {
+		pvt_pool = &qp->p_multixri_pool->pvt_pool;
+		pbl_pool = &qp->p_multixri_pool->pbl_pool;
+		txcmplq_cnt = qp->io_wq->pring->txcmplq_cnt;
+
+		multixri_pool->stat_pbl_count = pbl_pool->count;
+		multixri_pool->stat_pvt_count = pvt_pool->count;
+		multixri_pool->stat_busy_count = txcmplq_cnt;
+	}
+
+	multixri_pool->stat_snapshot_taken++;
+}
+#endif
+
+/**
+ * lpfc_adjust_pvt_pool_count - Adjust private pool count
+ * @phba: pointer to lpfc hba data structure.
+ * @hwqid: belong to which HWQ.
+ *
+ * This routine moves some XRIs from private to public pool when private pool
+ * is not busy.
+ **/
+void lpfc_adjust_pvt_pool_count(struct lpfc_hba *phba, u32 hwqid)
+{
+	struct lpfc_multixri_pool *multixri_pool;
+	u32 io_req_count;
+	u32 prev_io_req_count;
+
+	multixri_pool = phba->sli4_hba.hdwq[hwqid].p_multixri_pool;
+	if (!multixri_pool)
+		return;
+	io_req_count = multixri_pool->io_req_count;
+	prev_io_req_count = multixri_pool->prev_io_req_count;
+
+	if (prev_io_req_count != io_req_count) {
+		/* Private pool is busy */
+		multixri_pool->prev_io_req_count = io_req_count;
+	} else {
+		/* Private pool is not busy.
+		 * Move XRIs from private to public pool.
+		 */
+		lpfc_move_xri_pvt_to_pbl(phba, hwqid);
+	}
+}
+
+/**
+ * lpfc_adjust_high_watermark - Adjust high watermark
+ * @phba: pointer to lpfc hba data structure.
+ * @hwqid: belong to which HWQ.
+ *
+ * This routine sets high watermark as number of outstanding XRIs,
+ * but make sure the new value is between xri_limit/2 and xri_limit.
+ **/
+void lpfc_adjust_high_watermark(struct lpfc_hba *phba, u32 hwqid)
+{
+	u32 new_watermark;
+	u32 watermark_max;
+	u32 watermark_min;
+	u32 xri_limit;
+	u32 txcmplq_cnt;
+	u32 abts_io_bufs;
+	struct lpfc_multixri_pool *multixri_pool;
+	struct lpfc_sli4_hdw_queue *qp;
+
+	qp = &phba->sli4_hba.hdwq[hwqid];
+	multixri_pool = qp->p_multixri_pool;
+	if (!multixri_pool)
+		return;
+	xri_limit = multixri_pool->xri_limit;
+
+	watermark_max = xri_limit;
+	watermark_min = xri_limit / 2;
+
+	txcmplq_cnt = qp->io_wq->pring->txcmplq_cnt;
+	abts_io_bufs = qp->abts_scsi_io_bufs;
+	abts_io_bufs += qp->abts_nvme_io_bufs;
+
+	new_watermark = txcmplq_cnt + abts_io_bufs;
+	new_watermark = min(watermark_max, new_watermark);
+	new_watermark = max(watermark_min, new_watermark);
+	multixri_pool->pvt_pool.high_watermark = new_watermark;
+
+#ifdef LPFC_MXP_STAT
+	multixri_pool->stat_max_hwm = max(multixri_pool->stat_max_hwm,
+					  new_watermark);
+#endif
+}
+
+/**
+ * lpfc_move_xri_pvt_to_pbl - Move some XRIs from private to public pool
+ * @phba: pointer to lpfc hba data structure.
+ * @hwqid: belong to which HWQ.
+ *
+ * This routine is called from hearbeat timer when pvt_pool is idle.
+ * All free XRIs are moved from private to public pool on hwqid with 2 steps.
+ * The first step moves (all - low_watermark) amount of XRIs.
+ * The second step moves the rest of XRIs.
+ **/
+void lpfc_move_xri_pvt_to_pbl(struct lpfc_hba *phba, u32 hwqid)
+{
+	struct lpfc_pbl_pool *pbl_pool;
+	struct lpfc_pvt_pool *pvt_pool;
+	struct lpfc_sli4_hdw_queue *qp;
+	struct lpfc_io_buf *lpfc_ncmd;
+	struct lpfc_io_buf *lpfc_ncmd_next;
+	unsigned long iflag;
+	struct list_head tmp_list;
+	u32 tmp_count;
+
+	qp = &phba->sli4_hba.hdwq[hwqid];
+	pbl_pool = &qp->p_multixri_pool->pbl_pool;
+	pvt_pool = &qp->p_multixri_pool->pvt_pool;
+	tmp_count = 0;
+
+	lpfc_qp_spin_lock_irqsave(&pbl_pool->lock, iflag, qp, mv_to_pub_pool);
+	lpfc_qp_spin_lock(&pvt_pool->lock, qp, mv_from_pvt_pool);
+
+	if (pvt_pool->count > pvt_pool->low_watermark) {
+		/* Step 1: move (all - low_watermark) from pvt_pool
+		 * to pbl_pool
+		 */
+
+		/* Move low watermark of bufs from pvt_pool to tmp_list */
+		INIT_LIST_HEAD(&tmp_list);
+		list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
+					 &pvt_pool->list, list) {
+			list_move_tail(&lpfc_ncmd->list, &tmp_list);
+			tmp_count++;
+			if (tmp_count >= pvt_pool->low_watermark)
+				break;
+		}
+
+		/* Move all bufs from pvt_pool to pbl_pool */
+		list_splice_init(&pvt_pool->list, &pbl_pool->list);
+
+		/* Move all bufs from tmp_list to pvt_pool */
+		list_splice(&tmp_list, &pvt_pool->list);
+
+		pbl_pool->count += (pvt_pool->count - tmp_count);
+		pvt_pool->count = tmp_count;
+	} else {
+		/* Step 2: move the rest from pvt_pool to pbl_pool */
+		list_splice_init(&pvt_pool->list, &pbl_pool->list);
+		pbl_pool->count += pvt_pool->count;
+		pvt_pool->count = 0;
+	}
+
+	spin_unlock(&pvt_pool->lock);
+	spin_unlock_irqrestore(&pbl_pool->lock, iflag);
+}
+
+/**
+ * _lpfc_move_xri_pbl_to_pvt - Move some XRIs from public to private pool
+ * @phba: pointer to lpfc hba data structure
+ * @qp: pointer to HDW queue
+ * @pbl_pool: specified public free XRI pool
+ * @pvt_pool: specified private free XRI pool
+ * @count: number of XRIs to move
+ *
+ * This routine tries to move some free common bufs from the specified pbl_pool
+ * to the specified pvt_pool. It might move less than count XRIs if there's not
+ * enough in public pool.
+ *
+ * Return:
+ *   true - if XRIs are successfully moved from the specified pbl_pool to the
+ *          specified pvt_pool
+ *   false - if the specified pbl_pool is empty or locked by someone else
+ **/
+static bool
+_lpfc_move_xri_pbl_to_pvt(struct lpfc_hba *phba, struct lpfc_sli4_hdw_queue *qp,
+			  struct lpfc_pbl_pool *pbl_pool,
+			  struct lpfc_pvt_pool *pvt_pool, u32 count)
+{
+	struct lpfc_io_buf *lpfc_ncmd;
+	struct lpfc_io_buf *lpfc_ncmd_next;
+	unsigned long iflag;
+	int ret;
+
+	ret = spin_trylock_irqsave(&pbl_pool->lock, iflag);
+	if (ret) {
+		if (pbl_pool->count) {
+			/* Move a batch of XRIs from public to private pool */
+			lpfc_qp_spin_lock(&pvt_pool->lock, qp, mv_to_pvt_pool);
+			list_for_each_entry_safe(lpfc_ncmd,
+						 lpfc_ncmd_next,
+						 &pbl_pool->list,
+						 list) {
+				list_move_tail(&lpfc_ncmd->list,
+					       &pvt_pool->list);
+				pvt_pool->count++;
+				pbl_pool->count--;
+				count--;
+				if (count == 0)
+					break;
+			}
+
+			spin_unlock(&pvt_pool->lock);
+			spin_unlock_irqrestore(&pbl_pool->lock, iflag);
+			return true;
+		}
+		spin_unlock_irqrestore(&pbl_pool->lock, iflag);
+	}
+
+	return false;
+}
+
+/**
+ * lpfc_move_xri_pbl_to_pvt - Move some XRIs from public to private pool
+ * @phba: pointer to lpfc hba data structure.
+ * @hwqid: belong to which HWQ.
+ * @count: number of XRIs to move
+ *
+ * This routine tries to find some free common bufs in one of public pools with
+ * Round Robin method. The search always starts from local hwqid, then the next
+ * HWQ which was found last time (rrb_next_hwqid). Once a public pool is found,
+ * a batch of free common bufs are moved to private pool on hwqid.
+ * It might move less than count XRIs if there's not enough in public pool.
+ **/
+void lpfc_move_xri_pbl_to_pvt(struct lpfc_hba *phba, u32 hwqid, u32 count)
+{
+	struct lpfc_multixri_pool *multixri_pool;
+	struct lpfc_multixri_pool *next_multixri_pool;
+	struct lpfc_pvt_pool *pvt_pool;
+	struct lpfc_pbl_pool *pbl_pool;
+	struct lpfc_sli4_hdw_queue *qp;
+	u32 next_hwqid;
+	u32 hwq_count;
+	int ret;
+
+	qp = &phba->sli4_hba.hdwq[hwqid];
+	multixri_pool = qp->p_multixri_pool;
+	pvt_pool = &multixri_pool->pvt_pool;
+	pbl_pool = &multixri_pool->pbl_pool;
+
+	/* Check if local pbl_pool is available */
+	ret = _lpfc_move_xri_pbl_to_pvt(phba, qp, pbl_pool, pvt_pool, count);
+	if (ret) {
+#ifdef LPFC_MXP_STAT
+		multixri_pool->local_pbl_hit_count++;
+#endif
+		return;
+	}
+
+	hwq_count = phba->cfg_hdw_queue;
+
+	/* Get the next hwqid which was found last time */
+	next_hwqid = multixri_pool->rrb_next_hwqid;
+
+	do {
+		/* Go to next hwq */
+		next_hwqid = (next_hwqid + 1) % hwq_count;
+
+		next_multixri_pool =
+			phba->sli4_hba.hdwq[next_hwqid].p_multixri_pool;
+		pbl_pool = &next_multixri_pool->pbl_pool;
+
+		/* Check if the public free xri pool is available */
+		ret = _lpfc_move_xri_pbl_to_pvt(
+			phba, qp, pbl_pool, pvt_pool, count);
+
+		/* Exit while-loop if success or all hwqid are checked */
+	} while (!ret && next_hwqid != multixri_pool->rrb_next_hwqid);
+
+	/* Starting point for the next time */
+	multixri_pool->rrb_next_hwqid = next_hwqid;
+
+	if (!ret) {
+		/* stats: all public pools are empty*/
+		multixri_pool->pbl_empty_count++;
+	}
+
+#ifdef LPFC_MXP_STAT
+	if (ret) {
+		if (next_hwqid == hwqid)
+			multixri_pool->local_pbl_hit_count++;
+		else
+			multixri_pool->other_pbl_hit_count++;
+	}
+#endif
+}
+
+/**
+ * lpfc_keep_pvt_pool_above_lowwm - Keep pvt_pool above low watermark
+ * @phba: pointer to lpfc hba data structure.
+ * @hwqid: belong to which HWQ.
+ *
+ * This routine get a batch of XRIs from pbl_pool if pvt_pool is less than
+ * low watermark.
+ **/
+void lpfc_keep_pvt_pool_above_lowwm(struct lpfc_hba *phba, u32 hwqid)
+{
+	struct lpfc_multixri_pool *multixri_pool;
+	struct lpfc_pvt_pool *pvt_pool;
+
+	multixri_pool = phba->sli4_hba.hdwq[hwqid].p_multixri_pool;
+	pvt_pool = &multixri_pool->pvt_pool;
+
+	if (pvt_pool->count < pvt_pool->low_watermark)
+		lpfc_move_xri_pbl_to_pvt(phba, hwqid, XRI_BATCH);
+}
+
+/**
+ * lpfc_release_io_buf - Return one IO buf back to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @lpfc_ncmd: IO buf to be returned.
+ * @qp: belong to which HWQ.
+ *
+ * This routine returns one IO buf back to free pool. If this is an urgent IO,
+ * the IO buf is returned to expedite pool. If cfg_xri_rebalancing==1,
+ * the IO buf is returned to pbl_pool or pvt_pool based on watermark and
+ * xri_limit.  If cfg_xri_rebalancing==0, the IO buf is returned to
+ * lpfc_io_buf_list_put.
+ **/
+void lpfc_release_io_buf(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_ncmd,
+			 struct lpfc_sli4_hdw_queue *qp)
+{
+	unsigned long iflag;
+	struct lpfc_pbl_pool *pbl_pool;
+	struct lpfc_pvt_pool *pvt_pool;
+	struct lpfc_epd_pool *epd_pool;
+	u32 txcmplq_cnt;
+	u32 xri_owned;
+	u32 xri_limit;
+	u32 abts_io_bufs;
+
+	/* MUST zero fields if buffer is reused by another protocol */
+	lpfc_ncmd->nvmeCmd = NULL;
+	lpfc_ncmd->cur_iocbq.cmd_cmpl = NULL;
+
+	if (phba->cfg_xpsgl && !phba->nvmet_support &&
+	    !list_empty(&lpfc_ncmd->dma_sgl_xtra_list))
+		lpfc_put_sgl_per_hdwq(phba, lpfc_ncmd);
+
+	if (!list_empty(&lpfc_ncmd->dma_cmd_rsp_list))
+		lpfc_put_cmd_rsp_buf_per_hdwq(phba, lpfc_ncmd);
+
+	if (phba->cfg_xri_rebalancing) {
+		if (lpfc_ncmd->expedite) {
+			/* Return to expedite pool */
+			epd_pool = &phba->epd_pool;
+			spin_lock_irqsave(&epd_pool->lock, iflag);
+			list_add_tail(&lpfc_ncmd->list, &epd_pool->list);
+			epd_pool->count++;
+			spin_unlock_irqrestore(&epd_pool->lock, iflag);
+			return;
+		}
+
+		/* Avoid invalid access if an IO sneaks in and is being rejected
+		 * just _after_ xri pools are destroyed in lpfc_offline.
+		 * Nothing much can be done at this point.
+		 */
+		if (!qp->p_multixri_pool)
+			return;
+
+		pbl_pool = &qp->p_multixri_pool->pbl_pool;
+		pvt_pool = &qp->p_multixri_pool->pvt_pool;
+
+		txcmplq_cnt = qp->io_wq->pring->txcmplq_cnt;
+		abts_io_bufs = qp->abts_scsi_io_bufs;
+		abts_io_bufs += qp->abts_nvme_io_bufs;
+
+		xri_owned = pvt_pool->count + txcmplq_cnt + abts_io_bufs;
+		xri_limit = qp->p_multixri_pool->xri_limit;
+
+#ifdef LPFC_MXP_STAT
+		if (xri_owned <= xri_limit)
+			qp->p_multixri_pool->below_limit_count++;
+		else
+			qp->p_multixri_pool->above_limit_count++;
+#endif
+
+		/* XRI goes to either public or private free xri pool
+		 *     based on watermark and xri_limit
+		 */
+		if ((pvt_pool->count < pvt_pool->low_watermark) ||
+		    (xri_owned < xri_limit &&
+		     pvt_pool->count < pvt_pool->high_watermark)) {
+			lpfc_qp_spin_lock_irqsave(&pvt_pool->lock, iflag,
+						  qp, free_pvt_pool);
+			list_add_tail(&lpfc_ncmd->list,
+				      &pvt_pool->list);
+			pvt_pool->count++;
+			spin_unlock_irqrestore(&pvt_pool->lock, iflag);
+		} else {
+			lpfc_qp_spin_lock_irqsave(&pbl_pool->lock, iflag,
+						  qp, free_pub_pool);
+			list_add_tail(&lpfc_ncmd->list,
+				      &pbl_pool->list);
+			pbl_pool->count++;
+			spin_unlock_irqrestore(&pbl_pool->lock, iflag);
+		}
+	} else {
+		lpfc_qp_spin_lock_irqsave(&qp->io_buf_list_put_lock, iflag,
+					  qp, free_xri);
+		list_add_tail(&lpfc_ncmd->list,
+			      &qp->lpfc_io_buf_list_put);
+		qp->put_io_bufs++;
+		spin_unlock_irqrestore(&qp->io_buf_list_put_lock,
+				       iflag);
+	}
+}
+
+/**
+ * lpfc_get_io_buf_from_private_pool - Get one free IO buf from private pool
+ * @phba: pointer to lpfc hba data structure.
+ * @qp: pointer to HDW queue
+ * @pvt_pool: pointer to private pool data structure.
+ * @ndlp: pointer to lpfc nodelist data structure.
+ *
+ * This routine tries to get one free IO buf from private pool.
+ *
+ * Return:
+ *   pointer to one free IO buf - if private pool is not empty
+ *   NULL - if private pool is empty
+ **/
+static struct lpfc_io_buf *
+lpfc_get_io_buf_from_private_pool(struct lpfc_hba *phba,
+				  struct lpfc_sli4_hdw_queue *qp,
+				  struct lpfc_pvt_pool *pvt_pool,
+				  struct lpfc_nodelist *ndlp)
+{
+	struct lpfc_io_buf *lpfc_ncmd;
+	struct lpfc_io_buf *lpfc_ncmd_next;
+	unsigned long iflag;
+
+	lpfc_qp_spin_lock_irqsave(&pvt_pool->lock, iflag, qp, alloc_pvt_pool);
+	list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
+				 &pvt_pool->list, list) {
+		if (lpfc_test_rrq_active(
+			phba, ndlp, lpfc_ncmd->cur_iocbq.sli4_lxritag))
+			continue;
+		list_del(&lpfc_ncmd->list);
+		pvt_pool->count--;
+		spin_unlock_irqrestore(&pvt_pool->lock, iflag);
+		return lpfc_ncmd;
+	}
+	spin_unlock_irqrestore(&pvt_pool->lock, iflag);
+
+	return NULL;
+}
+
+/**
+ * lpfc_get_io_buf_from_expedite_pool - Get one free IO buf from expedite pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine tries to get one free IO buf from expedite pool.
+ *
+ * Return:
+ *   pointer to one free IO buf - if expedite pool is not empty
+ *   NULL - if expedite pool is empty
+ **/
+static struct lpfc_io_buf *
+lpfc_get_io_buf_from_expedite_pool(struct lpfc_hba *phba)
+{
+	struct lpfc_io_buf *lpfc_ncmd = NULL, *iter;
+	struct lpfc_io_buf *lpfc_ncmd_next;
+	unsigned long iflag;
+	struct lpfc_epd_pool *epd_pool;
+
+	epd_pool = &phba->epd_pool;
+
+	spin_lock_irqsave(&epd_pool->lock, iflag);
+	if (epd_pool->count > 0) {
+		list_for_each_entry_safe(iter, lpfc_ncmd_next,
+					 &epd_pool->list, list) {
+			list_del(&iter->list);
+			epd_pool->count--;
+			lpfc_ncmd = iter;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&epd_pool->lock, iflag);
+
+	return lpfc_ncmd;
+}
+
+/**
+ * lpfc_get_io_buf_from_multixri_pools - Get one free IO bufs
+ * @phba: pointer to lpfc hba data structure.
+ * @ndlp: pointer to lpfc nodelist data structure.
+ * @hwqid: belong to which HWQ
+ * @expedite: 1 means this request is urgent.
+ *
+ * This routine will do the following actions and then return a pointer to
+ * one free IO buf.
+ *
+ * 1. If private free xri count is empty, move some XRIs from public to
+ *    private pool.
+ * 2. Get one XRI from private free xri pool.
+ * 3. If we fail to get one from pvt_pool and this is an expedite request,
+ *    get one free xri from expedite pool.
+ *
+ * Note: ndlp is only used on SCSI side for RRQ testing.
+ *       The caller should pass NULL for ndlp on NVME side.
+ *
+ * Return:
+ *   pointer to one free IO buf - if private pool is not empty
+ *   NULL - if private pool is empty
+ **/
+static struct lpfc_io_buf *
+lpfc_get_io_buf_from_multixri_pools(struct lpfc_hba *phba,
+				    struct lpfc_nodelist *ndlp,
+				    int hwqid, int expedite)
+{
+	struct lpfc_sli4_hdw_queue *qp;
+	struct lpfc_multixri_pool *multixri_pool;
+	struct lpfc_pvt_pool *pvt_pool;
+	struct lpfc_io_buf *lpfc_ncmd;
+
+	qp = &phba->sli4_hba.hdwq[hwqid];
+	lpfc_ncmd = NULL;
+	if (!qp) {
+		lpfc_printf_log(phba, KERN_INFO,
+				LOG_SLI | LOG_NVME_ABTS | LOG_FCP,
+				"5556 NULL qp for hwqid  x%x\n", hwqid);
+		return lpfc_ncmd;
+	}
+	multixri_pool = qp->p_multixri_pool;
+	if (!multixri_pool) {
+		lpfc_printf_log(phba, KERN_INFO,
+				LOG_SLI | LOG_NVME_ABTS | LOG_FCP,
+				"5557 NULL multixri for hwqid  x%x\n", hwqid);
+		return lpfc_ncmd;
+	}
+	pvt_pool = &multixri_pool->pvt_pool;
+	if (!pvt_pool) {
+		lpfc_printf_log(phba, KERN_INFO,
+				LOG_SLI | LOG_NVME_ABTS | LOG_FCP,
+				"5558 NULL pvt_pool for hwqid  x%x\n", hwqid);
+		return lpfc_ncmd;
+	}
+	multixri_pool->io_req_count++;
+
+	/* If pvt_pool is empty, move some XRIs from public to private pool */
+	if (pvt_pool->count == 0)
+		lpfc_move_xri_pbl_to_pvt(phba, hwqid, XRI_BATCH);
+
+	/* Get one XRI from private free xri pool */
+	lpfc_ncmd = lpfc_get_io_buf_from_private_pool(phba, qp, pvt_pool, ndlp);
+
+	if (lpfc_ncmd) {
+		lpfc_ncmd->hdwq = qp;
+		lpfc_ncmd->hdwq_no = hwqid;
+	} else if (expedite) {
+		/* If we fail to get one from pvt_pool and this is an expedite
+		 * request, get one free xri from expedite pool.
+		 */
+		lpfc_ncmd = lpfc_get_io_buf_from_expedite_pool(phba);
+	}
+
+	return lpfc_ncmd;
+}
+
+static inline struct lpfc_io_buf *
+lpfc_io_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, int idx)
+{
+	struct lpfc_sli4_hdw_queue *qp;
+	struct lpfc_io_buf *lpfc_cmd, *lpfc_cmd_next;
+
+	qp = &phba->sli4_hba.hdwq[idx];
+	list_for_each_entry_safe(lpfc_cmd, lpfc_cmd_next,
+				 &qp->lpfc_io_buf_list_get, list) {
+		if (lpfc_test_rrq_active(phba, ndlp,
+					 lpfc_cmd->cur_iocbq.sli4_lxritag))
+			continue;
+
+		if (lpfc_cmd->flags & LPFC_SBUF_NOT_POSTED)
+			continue;
+
+		list_del_init(&lpfc_cmd->list);
+		qp->get_io_bufs--;
+		lpfc_cmd->hdwq = qp;
+		lpfc_cmd->hdwq_no = idx;
+		return lpfc_cmd;
+	}
+	return NULL;
+}
+
+/**
+ * lpfc_get_io_buf - Get one IO buffer from free pool
+ * @phba: The HBA for which this call is being executed.
+ * @ndlp: pointer to lpfc nodelist data structure.
+ * @hwqid: belong to which HWQ
+ * @expedite: 1 means this request is urgent.
+ *
+ * This routine gets one IO buffer from free pool. If cfg_xri_rebalancing==1,
+ * removes a IO buffer from multiXRI pools. If cfg_xri_rebalancing==0, removes
+ * a IO buffer from head of @hdwq io_buf_list and returns to caller.
+ *
+ * Note: ndlp is only used on SCSI side for RRQ testing.
+ *       The caller should pass NULL for ndlp on NVME side.
+ *
+ * Return codes:
+ *   NULL - Error
+ *   Pointer to lpfc_io_buf - Success
+ **/
+struct lpfc_io_buf *lpfc_get_io_buf(struct lpfc_hba *phba,
+				    struct lpfc_nodelist *ndlp,
+				    u32 hwqid, int expedite)
+{
+	struct lpfc_sli4_hdw_queue *qp;
+	unsigned long iflag;
+	struct lpfc_io_buf *lpfc_cmd;
+
+	qp = &phba->sli4_hba.hdwq[hwqid];
+	lpfc_cmd = NULL;
+	if (!qp) {
+		lpfc_printf_log(phba, KERN_WARNING,
+				LOG_SLI | LOG_NVME_ABTS | LOG_FCP,
+				"5555 NULL qp for hwqid  x%x\n", hwqid);
+		return lpfc_cmd;
+	}
+
+	if (phba->cfg_xri_rebalancing)
+		lpfc_cmd = lpfc_get_io_buf_from_multixri_pools(
+			phba, ndlp, hwqid, expedite);
+	else {
+		lpfc_qp_spin_lock_irqsave(&qp->io_buf_list_get_lock, iflag,
+					  qp, alloc_xri_get);
+		if (qp->get_io_bufs > LPFC_NVME_EXPEDITE_XRICNT || expedite)
+			lpfc_cmd = lpfc_io_buf(phba, ndlp, hwqid);
+		if (!lpfc_cmd) {
+			lpfc_qp_spin_lock(&qp->io_buf_list_put_lock,
+					  qp, alloc_xri_put);
+			list_splice(&qp->lpfc_io_buf_list_put,
+				    &qp->lpfc_io_buf_list_get);
+			qp->get_io_bufs += qp->put_io_bufs;
+			INIT_LIST_HEAD(&qp->lpfc_io_buf_list_put);
+			qp->put_io_bufs = 0;
+			spin_unlock(&qp->io_buf_list_put_lock);
+			if (qp->get_io_bufs > LPFC_NVME_EXPEDITE_XRICNT ||
+			    expedite)
+				lpfc_cmd = lpfc_io_buf(phba, ndlp, hwqid);
+		}
+		spin_unlock_irqrestore(&qp->io_buf_list_get_lock, iflag);
+	}
+
+	return lpfc_cmd;
+}
+
+/**
+ * lpfc_read_object - Retrieve object data from HBA
+ * @phba: The HBA for which this call is being executed.
+ * @rdobject: Pathname of object data we want to read.
+ * @datap: Pointer to where data will be copied to.
+ * @datasz: size of data area
+ *
+ * This routine is limited to object sizes of LPFC_BPL_SIZE (1024) or less.
+ * The data will be truncated if datasz is not large enough.
+ * Version 1 is not supported with Embedded mbox cmd, so we must use version 0.
+ * Returns the actual bytes read from the object.
+ */
+int
+lpfc_read_object(struct lpfc_hba *phba, char *rdobject, uint32_t *datap,
+		 uint32_t datasz)
+{
+	struct lpfc_mbx_read_object *read_object;
+	LPFC_MBOXQ_t *mbox;
+	int rc, length, eof, j, byte_cnt = 0;
+	uint32_t shdr_status, shdr_add_status;
+	union lpfc_sli4_cfg_shdr *shdr;
+	struct lpfc_dmabuf *pcmd;
+	u32 rd_object_name[LPFC_MBX_OBJECT_NAME_LEN_DW] = {0};
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+	length = (sizeof(struct lpfc_mbx_read_object) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_READ_OBJECT,
+			 length, LPFC_SLI4_MBX_EMBED);
+	read_object = &mbox->u.mqe.un.read_object;
+	shdr = (union lpfc_sli4_cfg_shdr *)&read_object->header.cfg_shdr;
+
+	bf_set(lpfc_mbox_hdr_version, &shdr->request, LPFC_Q_CREATE_VERSION_0);
+	bf_set(lpfc_mbx_rd_object_rlen, &read_object->u.request, datasz);
+	read_object->u.request.rd_object_offset = 0;
+	read_object->u.request.rd_object_cnt = 1;
+
+	memset((void *)read_object->u.request.rd_object_name, 0,
+	       LPFC_OBJ_NAME_SZ);
+	scnprintf((char *)rd_object_name, sizeof(rd_object_name), rdobject);
+	for (j = 0; j < strlen(rdobject); j++)
+		read_object->u.request.rd_object_name[j] =
+			cpu_to_le32(rd_object_name[j]);
+
+	pcmd = kmalloc(sizeof(*pcmd), GFP_KERNEL);
+	if (pcmd)
+		pcmd->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &pcmd->phys);
+	if (!pcmd || !pcmd->virt) {
+		kfree(pcmd);
+		mempool_free(mbox, phba->mbox_mem_pool);
+		return -ENOMEM;
+	}
+	memset((void *)pcmd->virt, 0, LPFC_BPL_SIZE);
+	read_object->u.request.rd_object_hbuf[0].pa_lo =
+		putPaddrLow(pcmd->phys);
+	read_object->u.request.rd_object_hbuf[0].pa_hi =
+		putPaddrHigh(pcmd->phys);
+	read_object->u.request.rd_object_hbuf[0].length = LPFC_BPL_SIZE;
+
+	mbox->vport = phba->pport;
+	mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+	mbox->ctx_ndlp = NULL;
+
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+
+	if (shdr_status == STATUS_FAILED &&
+	    shdr_add_status == ADD_STATUS_INVALID_OBJECT_NAME) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_CGN_MGMT,
+				"4674 No port cfg file in FW.\n");
+		byte_cnt = -ENOENT;
+	} else if (shdr_status || shdr_add_status || rc) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_CGN_MGMT,
+				"2625 READ_OBJECT mailbox failed with "
+				"status x%x add_status x%x, mbx status x%x\n",
+				shdr_status, shdr_add_status, rc);
+		byte_cnt = -ENXIO;
+	} else {
+		/* Success */
+		length = read_object->u.response.rd_object_actual_rlen;
+		eof = bf_get(lpfc_mbx_rd_object_eof, &read_object->u.response);
+		lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_CGN_MGMT,
+				"2626 READ_OBJECT Success len %d:%d, EOF %d\n",
+				length, datasz, eof);
+
+		/* Detect the port config file exists but is empty */
+		if (!length && eof) {
+			byte_cnt = 0;
+			goto exit;
+		}
+
+		byte_cnt = length;
+		lpfc_sli_pcimem_bcopy(pcmd->virt, datap, byte_cnt);
+	}
+
+ exit:
+	/* This is an embedded SLI4 mailbox with an external buffer allocated.
+	 * Free the pcmd and then cleanup with the correct routine.
+	 */
+	lpfc_mbuf_free(phba, pcmd->virt, pcmd->phys);
+	kfree(pcmd);
+	lpfc_sli4_mbox_cmd_free(phba, mbox);
+	return byte_cnt;
+}
+
+/**
+ * lpfc_get_sgl_per_hdwq - Get one SGL chunk from hdwq's pool
+ * @phba: The HBA for which this call is being executed.
+ * @lpfc_buf: IO buf structure to append the SGL chunk
+ *
+ * This routine gets one SGL chunk buffer from hdwq's SGL chunk pool,
+ * and will allocate an SGL chunk if the pool is empty.
+ *
+ * Return codes:
+ *   NULL - Error
+ *   Pointer to sli4_hybrid_sgl - Success
+ **/
+struct sli4_hybrid_sgl *
+lpfc_get_sgl_per_hdwq(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_buf)
+{
+	struct sli4_hybrid_sgl *list_entry = NULL;
+	struct sli4_hybrid_sgl *tmp = NULL;
+	struct sli4_hybrid_sgl *allocated_sgl = NULL;
+	struct lpfc_sli4_hdw_queue *hdwq = lpfc_buf->hdwq;
+	struct list_head *buf_list = &hdwq->sgl_list;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&hdwq->hdwq_lock, iflags);
+
+	if (likely(!list_empty(buf_list))) {
+		/* break off 1 chunk from the sgl_list */
+		list_for_each_entry_safe(list_entry, tmp,
+					 buf_list, list_node) {
+			list_move_tail(&list_entry->list_node,
+				       &lpfc_buf->dma_sgl_xtra_list);
+			break;
+		}
+	} else {
+		/* allocate more */
+		spin_unlock_irqrestore(&hdwq->hdwq_lock, iflags);
+		tmp = kmalloc_node(sizeof(*tmp), GFP_ATOMIC,
+				   cpu_to_node(hdwq->io_wq->chann));
+		if (!tmp) {
+			lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+					"8353 error kmalloc memory for HDWQ "
+					"%d %s\n",
+					lpfc_buf->hdwq_no, __func__);
+			return NULL;
+		}
+
+		tmp->dma_sgl = dma_pool_alloc(phba->lpfc_sg_dma_buf_pool,
+					      GFP_ATOMIC, &tmp->dma_phys_sgl);
+		if (!tmp->dma_sgl) {
+			lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+					"8354 error pool_alloc memory for HDWQ "
+					"%d %s\n",
+					lpfc_buf->hdwq_no, __func__);
+			kfree(tmp);
+			return NULL;
+		}
+
+		spin_lock_irqsave(&hdwq->hdwq_lock, iflags);
+		list_add_tail(&tmp->list_node, &lpfc_buf->dma_sgl_xtra_list);
+	}
+
+	allocated_sgl = list_last_entry(&lpfc_buf->dma_sgl_xtra_list,
+					struct sli4_hybrid_sgl,
+					list_node);
+
+	spin_unlock_irqrestore(&hdwq->hdwq_lock, iflags);
+
+	return allocated_sgl;
+}
+
+/**
+ * lpfc_put_sgl_per_hdwq - Put one SGL chunk into hdwq pool
+ * @phba: The HBA for which this call is being executed.
+ * @lpfc_buf: IO buf structure with the SGL chunk
+ *
+ * This routine puts one SGL chunk buffer into hdwq's SGL chunk pool.
+ *
+ * Return codes:
+ *   0 - Success
+ *   -EINVAL - Error
+ **/
+int
+lpfc_put_sgl_per_hdwq(struct lpfc_hba *phba, struct lpfc_io_buf *lpfc_buf)
+{
+	int rc = 0;
+	struct sli4_hybrid_sgl *list_entry = NULL;
+	struct sli4_hybrid_sgl *tmp = NULL;
+	struct lpfc_sli4_hdw_queue *hdwq = lpfc_buf->hdwq;
+	struct list_head *buf_list = &hdwq->sgl_list;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&hdwq->hdwq_lock, iflags);
+
+	if (likely(!list_empty(&lpfc_buf->dma_sgl_xtra_list))) {
+		list_for_each_entry_safe(list_entry, tmp,
+					 &lpfc_buf->dma_sgl_xtra_list,
+					 list_node) {
+			list_move_tail(&list_entry->list_node,
+				       buf_list);
+		}
+	} else {
+		rc = -EINVAL;
+	}
+
+	spin_unlock_irqrestore(&hdwq->hdwq_lock, iflags);
+	return rc;
+}
+
+/**
+ * lpfc_free_sgl_per_hdwq - Free all SGL chunks of hdwq pool
+ * @phba: phba object
+ * @hdwq: hdwq to cleanup sgl buff resources on
+ *
+ * This routine frees all SGL chunks of hdwq SGL chunk pool.
+ *
+ * Return codes:
+ *   None
+ **/
+void
+lpfc_free_sgl_per_hdwq(struct lpfc_hba *phba,
+		       struct lpfc_sli4_hdw_queue *hdwq)
+{
+	struct list_head *buf_list = &hdwq->sgl_list;
+	struct sli4_hybrid_sgl *list_entry = NULL;
+	struct sli4_hybrid_sgl *tmp = NULL;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&hdwq->hdwq_lock, iflags);
+
+	/* Free sgl pool */
+	list_for_each_entry_safe(list_entry, tmp,
+				 buf_list, list_node) {
+		dma_pool_free(phba->lpfc_sg_dma_buf_pool,
+			      list_entry->dma_sgl,
+			      list_entry->dma_phys_sgl);
+		list_del(&list_entry->list_node);
+		kfree(list_entry);
+	}
+
+	spin_unlock_irqrestore(&hdwq->hdwq_lock, iflags);
+}
+
+/**
+ * lpfc_get_cmd_rsp_buf_per_hdwq - Get one CMD/RSP buffer from hdwq
+ * @phba: The HBA for which this call is being executed.
+ * @lpfc_buf: IO buf structure to attach the CMD/RSP buffer
+ *
+ * This routine gets one CMD/RSP buffer from hdwq's CMD/RSP pool,
+ * and will allocate an CMD/RSP buffer if the pool is empty.
+ *
+ * Return codes:
+ *   NULL - Error
+ *   Pointer to fcp_cmd_rsp_buf - Success
+ **/
+struct fcp_cmd_rsp_buf *
+lpfc_get_cmd_rsp_buf_per_hdwq(struct lpfc_hba *phba,
+			      struct lpfc_io_buf *lpfc_buf)
+{
+	struct fcp_cmd_rsp_buf *list_entry = NULL;
+	struct fcp_cmd_rsp_buf *tmp = NULL;
+	struct fcp_cmd_rsp_buf *allocated_buf = NULL;
+	struct lpfc_sli4_hdw_queue *hdwq = lpfc_buf->hdwq;
+	struct list_head *buf_list = &hdwq->cmd_rsp_buf_list;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&hdwq->hdwq_lock, iflags);
+
+	if (likely(!list_empty(buf_list))) {
+		/* break off 1 chunk from the list */
+		list_for_each_entry_safe(list_entry, tmp,
+					 buf_list,
+					 list_node) {
+			list_move_tail(&list_entry->list_node,
+				       &lpfc_buf->dma_cmd_rsp_list);
+			break;
+		}
+	} else {
+		/* allocate more */
+		spin_unlock_irqrestore(&hdwq->hdwq_lock, iflags);
+		tmp = kmalloc_node(sizeof(*tmp), GFP_ATOMIC,
+				   cpu_to_node(hdwq->io_wq->chann));
+		if (!tmp) {
+			lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+					"8355 error kmalloc memory for HDWQ "
+					"%d %s\n",
+					lpfc_buf->hdwq_no, __func__);
+			return NULL;
+		}
+
+		tmp->fcp_cmnd = dma_pool_zalloc(phba->lpfc_cmd_rsp_buf_pool,
+						GFP_ATOMIC,
+						&tmp->fcp_cmd_rsp_dma_handle);
+
+		if (!tmp->fcp_cmnd) {
+			lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+					"8356 error pool_alloc memory for HDWQ "
+					"%d %s\n",
+					lpfc_buf->hdwq_no, __func__);
+			kfree(tmp);
+			return NULL;
+		}
+
+		tmp->fcp_rsp = (struct fcp_rsp *)((uint8_t *)tmp->fcp_cmnd +
+				sizeof(struct fcp_cmnd));
+
+		spin_lock_irqsave(&hdwq->hdwq_lock, iflags);
+		list_add_tail(&tmp->list_node, &lpfc_buf->dma_cmd_rsp_list);
+	}
+
+	allocated_buf = list_last_entry(&lpfc_buf->dma_cmd_rsp_list,
+					struct fcp_cmd_rsp_buf,
+					list_node);
+
+	spin_unlock_irqrestore(&hdwq->hdwq_lock, iflags);
+
+	return allocated_buf;
+}
+
+/**
+ * lpfc_put_cmd_rsp_buf_per_hdwq - Put one CMD/RSP buffer into hdwq pool
+ * @phba: The HBA for which this call is being executed.
+ * @lpfc_buf: IO buf structure with the CMD/RSP buf
+ *
+ * This routine puts one CMD/RSP buffer into executing CPU's CMD/RSP pool.
+ *
+ * Return codes:
+ *   0 - Success
+ *   -EINVAL - Error
+ **/
+int
+lpfc_put_cmd_rsp_buf_per_hdwq(struct lpfc_hba *phba,
+			      struct lpfc_io_buf *lpfc_buf)
+{
+	int rc = 0;
+	struct fcp_cmd_rsp_buf *list_entry = NULL;
+	struct fcp_cmd_rsp_buf *tmp = NULL;
+	struct lpfc_sli4_hdw_queue *hdwq = lpfc_buf->hdwq;
+	struct list_head *buf_list = &hdwq->cmd_rsp_buf_list;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&hdwq->hdwq_lock, iflags);
+
+	if (likely(!list_empty(&lpfc_buf->dma_cmd_rsp_list))) {
+		list_for_each_entry_safe(list_entry, tmp,
+					 &lpfc_buf->dma_cmd_rsp_list,
+					 list_node) {
+			list_move_tail(&list_entry->list_node,
+				       buf_list);
+		}
+	} else {
+		rc = -EINVAL;
+	}
+
+	spin_unlock_irqrestore(&hdwq->hdwq_lock, iflags);
+	return rc;
+}
+
+/**
+ * lpfc_free_cmd_rsp_buf_per_hdwq - Free all CMD/RSP chunks of hdwq pool
+ * @phba: phba object
+ * @hdwq: hdwq to cleanup cmd rsp buff resources on
+ *
+ * This routine frees all CMD/RSP buffers of hdwq's CMD/RSP buf pool.
+ *
+ * Return codes:
+ *   None
+ **/
+void
+lpfc_free_cmd_rsp_buf_per_hdwq(struct lpfc_hba *phba,
+			       struct lpfc_sli4_hdw_queue *hdwq)
+{
+	struct list_head *buf_list = &hdwq->cmd_rsp_buf_list;
+	struct fcp_cmd_rsp_buf *list_entry = NULL;
+	struct fcp_cmd_rsp_buf *tmp = NULL;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&hdwq->hdwq_lock, iflags);
+
+	/* Free cmd_rsp buf pool */
+	list_for_each_entry_safe(list_entry, tmp,
+				 buf_list,
+				 list_node) {
+		dma_pool_free(phba->lpfc_cmd_rsp_buf_pool,
+			      list_entry->fcp_cmnd,
+			      list_entry->fcp_cmd_rsp_dma_handle);
+		list_del(&list_entry->list_node);
+		kfree(list_entry);
+	}
+
+	spin_unlock_irqrestore(&hdwq->hdwq_lock, iflags);
+}
+
+/**
+ * lpfc_sli_prep_wqe - Prepare WQE for the command to be posted
+ * @phba: phba object
+ * @job: job entry of the command to be posted.
+ *
+ * Fill the common fields of the wqe for each of the command.
+ *
+ * Return codes:
+ *	None
+ **/
+void
+lpfc_sli_prep_wqe(struct lpfc_hba *phba, struct lpfc_iocbq *job)
+{
+	u8 cmnd;
+	u32 *pcmd;
+	u32 if_type = 0;
+	u32 fip, abort_tag;
+	struct lpfc_nodelist *ndlp = NULL;
+	union lpfc_wqe128 *wqe = &job->wqe;
+	u8 command_type = ELS_COMMAND_NON_FIP;
+
+	fip = phba->hba_flag & HBA_FIP_SUPPORT;
+	/* The fcp commands will set command type */
+	if (job->cmd_flag &  LPFC_IO_FCP)
+		command_type = FCP_COMMAND;
+	else if (fip && (job->cmd_flag & LPFC_FIP_ELS_ID_MASK))
+		command_type = ELS_COMMAND_FIP;
+	else
+		command_type = ELS_COMMAND_NON_FIP;
+
+	abort_tag = job->iotag;
+	cmnd = bf_get(wqe_cmnd, &wqe->els_req.wqe_com);
+
+	switch (cmnd) {
+	case CMD_ELS_REQUEST64_WQE:
+		ndlp = job->ndlp;
+
+		if_type = bf_get(lpfc_sli_intf_if_type,
+				 &phba->sli4_hba.sli_intf);
+		if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
+			pcmd = (u32 *)job->cmd_dmabuf->virt;
+			if (pcmd && (*pcmd == ELS_CMD_FLOGI ||
+				     *pcmd == ELS_CMD_SCR ||
+				     *pcmd == ELS_CMD_RDF ||
+				     *pcmd == ELS_CMD_EDC ||
+				     *pcmd == ELS_CMD_RSCN_XMT ||
+				     *pcmd == ELS_CMD_FDISC ||
+				     *pcmd == ELS_CMD_LOGO ||
+				     *pcmd == ELS_CMD_QFPA ||
+				     *pcmd == ELS_CMD_UVEM ||
+				     *pcmd == ELS_CMD_PLOGI)) {
+				bf_set(els_req64_sp, &wqe->els_req, 1);
+				bf_set(els_req64_sid, &wqe->els_req,
+				       job->vport->fc_myDID);
+
+				if ((*pcmd == ELS_CMD_FLOGI) &&
+				    !(phba->fc_topology ==
+				      LPFC_TOPOLOGY_LOOP))
+					bf_set(els_req64_sid, &wqe->els_req, 0);
+
+				bf_set(wqe_ct, &wqe->els_req.wqe_com, 1);
+				bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com,
+				       phba->vpi_ids[job->vport->vpi]);
+			} else if (pcmd) {
+				bf_set(wqe_ct, &wqe->els_req.wqe_com, 0);
+				bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com,
+				       phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
+			}
+		}
+
+		bf_set(wqe_temp_rpi, &wqe->els_req.wqe_com,
+		       phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
+
+		bf_set(wqe_dbde, &wqe->els_req.wqe_com, 1);
+		bf_set(wqe_iod, &wqe->els_req.wqe_com, LPFC_WQE_IOD_READ);
+		bf_set(wqe_qosd, &wqe->els_req.wqe_com, 1);
+		bf_set(wqe_lenloc, &wqe->els_req.wqe_com, LPFC_WQE_LENLOC_NONE);
+		bf_set(wqe_ebde_cnt, &wqe->els_req.wqe_com, 0);
+		break;
+	case CMD_XMIT_ELS_RSP64_WQE:
+		ndlp = job->ndlp;
+
+		/* word4 */
+		wqe->xmit_els_rsp.word4 = 0;
+
+		if_type = bf_get(lpfc_sli_intf_if_type,
+				 &phba->sli4_hba.sli_intf);
+		if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) {
+			if (job->vport->fc_flag & FC_PT2PT) {
+				bf_set(els_rsp64_sp, &wqe->xmit_els_rsp, 1);
+				bf_set(els_rsp64_sid, &wqe->xmit_els_rsp,
+				       job->vport->fc_myDID);
+				if (job->vport->fc_myDID == Fabric_DID) {
+					bf_set(wqe_els_did,
+					       &wqe->xmit_els_rsp.wqe_dest, 0);
+				}
+			}
+		}
+
+		bf_set(wqe_dbde, &wqe->xmit_els_rsp.wqe_com, 1);
+		bf_set(wqe_iod, &wqe->xmit_els_rsp.wqe_com, LPFC_WQE_IOD_WRITE);
+		bf_set(wqe_qosd, &wqe->xmit_els_rsp.wqe_com, 1);
+		bf_set(wqe_lenloc, &wqe->xmit_els_rsp.wqe_com,
+		       LPFC_WQE_LENLOC_WORD3);
+		bf_set(wqe_ebde_cnt, &wqe->xmit_els_rsp.wqe_com, 0);
+
+		if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
+			bf_set(els_rsp64_sp, &wqe->xmit_els_rsp, 1);
+			bf_set(els_rsp64_sid, &wqe->xmit_els_rsp,
+			       job->vport->fc_myDID);
+			bf_set(wqe_ct, &wqe->xmit_els_rsp.wqe_com, 1);
+		}
+
+		if (phba->sli_rev == LPFC_SLI_REV4) {
+			bf_set(wqe_rsp_temp_rpi, &wqe->xmit_els_rsp,
+			       phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]);
+
+			if (bf_get(wqe_ct, &wqe->xmit_els_rsp.wqe_com))
+				bf_set(wqe_ctxt_tag, &wqe->xmit_els_rsp.wqe_com,
+				       phba->vpi_ids[job->vport->vpi]);
+		}
+		command_type = OTHER_COMMAND;
+		break;
+	case CMD_GEN_REQUEST64_WQE:
+		/* Word 10 */
+		bf_set(wqe_dbde, &wqe->gen_req.wqe_com, 1);
+		bf_set(wqe_iod, &wqe->gen_req.wqe_com, LPFC_WQE_IOD_READ);
+		bf_set(wqe_qosd, &wqe->gen_req.wqe_com, 1);
+		bf_set(wqe_lenloc, &wqe->gen_req.wqe_com, LPFC_WQE_LENLOC_NONE);
+		bf_set(wqe_ebde_cnt, &wqe->gen_req.wqe_com, 0);
+		command_type = OTHER_COMMAND;
+		break;
+	case CMD_XMIT_SEQUENCE64_WQE:
+		if (phba->link_flag & LS_LOOPBACK_MODE)
+			bf_set(wqe_xo, &wqe->xmit_sequence.wge_ctl, 1);
+
+		wqe->xmit_sequence.rsvd3 = 0;
+		bf_set(wqe_pu, &wqe->xmit_sequence.wqe_com, 0);
+		bf_set(wqe_dbde, &wqe->xmit_sequence.wqe_com, 1);
+		bf_set(wqe_iod, &wqe->xmit_sequence.wqe_com,
+		       LPFC_WQE_IOD_WRITE);
+		bf_set(wqe_lenloc, &wqe->xmit_sequence.wqe_com,
+		       LPFC_WQE_LENLOC_WORD12);
+		bf_set(wqe_ebde_cnt, &wqe->xmit_sequence.wqe_com, 0);
+		command_type = OTHER_COMMAND;
+		break;
+	case CMD_XMIT_BLS_RSP64_WQE:
+		bf_set(xmit_bls_rsp64_seqcnthi, &wqe->xmit_bls_rsp, 0xffff);
+		bf_set(wqe_xmit_bls_pt, &wqe->xmit_bls_rsp.wqe_dest, 0x1);
+		bf_set(wqe_ct, &wqe->xmit_bls_rsp.wqe_com, 1);
+		bf_set(wqe_ctxt_tag, &wqe->xmit_bls_rsp.wqe_com,
+		       phba->vpi_ids[phba->pport->vpi]);
+		bf_set(wqe_qosd, &wqe->xmit_bls_rsp.wqe_com, 1);
+		bf_set(wqe_lenloc, &wqe->xmit_bls_rsp.wqe_com,
+		       LPFC_WQE_LENLOC_NONE);
+		/* Overwrite the pre-set comnd type with OTHER_COMMAND */
+		command_type = OTHER_COMMAND;
+		break;
+	case CMD_FCP_ICMND64_WQE:	/* task mgmt commands */
+	case CMD_ABORT_XRI_WQE:		/* abort iotag */
+	case CMD_SEND_FRAME:		/* mds loopback */
+		/* cases already formatted for sli4 wqe - no chgs necessary */
+		return;
+	default:
+		dump_stack();
+		lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT,
+				"6207 Invalid command 0x%x\n",
+				cmnd);
+		break;
+	}
+
+	wqe->generic.wqe_com.abort_tag = abort_tag;
+	bf_set(wqe_reqtag, &wqe->generic.wqe_com, job->iotag);
+	bf_set(wqe_cmd_type, &wqe->generic.wqe_com, command_type);
+	bf_set(wqe_cqid, &wqe->generic.wqe_com, LPFC_WQE_CQ_ID_DEFAULT);
+}