Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 462 insertions, 0 deletions

diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
new file mode 100644
index 000000000..509d8f32a
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -0,0 +1,462 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Marvell 88SE64xx/88SE94xx main function head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ * Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
+*/
+
+#ifndef _MV_SAS_H_
+#define _MV_SAS_H_
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <asm/unaligned.h>
+#include <scsi/libsas.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
+#include "mv_defs.h"
+
+#define DRV_NAME		"mvsas"
+#define DRV_VERSION		"0.8.16"
+#define MVS_ID_NOT_MAPPED	0x7f
+#define WIDE_PORT_MAX_PHY		4
+#define mv_printk(fmt, arg ...)	\
+	printk(KERN_DEBUG"%s %d:" fmt, __FILE__, __LINE__, ## arg)
+#ifdef MV_DEBUG
+#define mv_dprintk(format, arg...)	\
+	printk(KERN_DEBUG"%s %d:" format, __FILE__, __LINE__, ## arg)
+#else
+#define mv_dprintk(format, arg...) no_printk(format, ## arg)
+#endif
+#define MV_MAX_U32			0xffffffff
+
+extern int interrupt_coalescing;
+extern struct mvs_tgt_initiator mvs_tgt;
+extern struct mvs_info *tgt_mvi;
+extern const struct mvs_dispatch mvs_64xx_dispatch;
+extern const struct mvs_dispatch mvs_94xx_dispatch;
+
+#define bit(n) ((u64)1 << n)
+
+#define for_each_phy(__lseq_mask, __mc, __lseq)			\
+	for ((__mc) = (__lseq_mask), (__lseq) = 0;		\
+					(__mc) != 0 ;		\
+					(++__lseq), (__mc) >>= 1)
+
+#define MVS_PHY_ID (1U << sas_phy->id)
+#define MV_INIT_DELAYED_WORK(w, f, d)	INIT_DELAYED_WORK(w, f)
+#define UNASSOC_D2H_FIS(id)		\
+	((void *) mvi->rx_fis + 0x100 * id)
+#define SATA_RECEIVED_FIS_LIST(reg_set)	\
+	((void *) mvi->rx_fis + mvi->chip->fis_offs + 0x100 * reg_set)
+#define SATA_RECEIVED_SDB_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x58)
+#define SATA_RECEIVED_D2H_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x40)
+#define SATA_RECEIVED_PIO_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x20)
+#define SATA_RECEIVED_DMA_FIS(reg_set)	\
+	(SATA_RECEIVED_FIS_LIST(reg_set) + 0x00)
+
+enum dev_status {
+	MVS_DEV_NORMAL = 0x0,
+	MVS_DEV_EH	= 0x1,
+};
+
+enum dev_reset {
+	MVS_SOFT_RESET	= 0,
+	MVS_HARD_RESET	= 1,
+	MVS_PHY_TUNE	= 2,
+};
+
+struct mvs_info;
+struct mvs_prv_info;
+
+struct mvs_dispatch {
+	char *name;
+	int (*chip_init)(struct mvs_info *mvi);
+	int (*spi_init)(struct mvs_info *mvi);
+	int (*chip_ioremap)(struct mvs_info *mvi);
+	void (*chip_iounmap)(struct mvs_info *mvi);
+	irqreturn_t (*isr)(struct mvs_info *mvi, int irq, u32 stat);
+	u32 (*isr_status)(struct mvs_info *mvi, int irq);
+	void (*interrupt_enable)(struct mvs_info *mvi);
+	void (*interrupt_disable)(struct mvs_info *mvi);
+
+	u32 (*read_phy_ctl)(struct mvs_info *mvi, u32 port);
+	void (*write_phy_ctl)(struct mvs_info *mvi, u32 port, u32 val);
+
+	u32 (*read_port_cfg_data)(struct mvs_info *mvi, u32 port);
+	void (*write_port_cfg_data)(struct mvs_info *mvi, u32 port, u32 val);
+	void (*write_port_cfg_addr)(struct mvs_info *mvi, u32 port, u32 addr);
+
+	u32 (*read_port_vsr_data)(struct mvs_info *mvi, u32 port);
+	void (*write_port_vsr_data)(struct mvs_info *mvi, u32 port, u32 val);
+	void (*write_port_vsr_addr)(struct mvs_info *mvi, u32 port, u32 addr);
+
+	u32 (*read_port_irq_stat)(struct mvs_info *mvi, u32 port);
+	void (*write_port_irq_stat)(struct mvs_info *mvi, u32 port, u32 val);
+
+	u32 (*read_port_irq_mask)(struct mvs_info *mvi, u32 port);
+	void (*write_port_irq_mask)(struct mvs_info *mvi, u32 port, u32 val);
+
+	void (*command_active)(struct mvs_info *mvi, u32 slot_idx);
+	void (*clear_srs_irq)(struct mvs_info *mvi, u8 reg_set, u8 clear_all);
+	void (*issue_stop)(struct mvs_info *mvi, enum mvs_port_type type,
+				u32 tfs);
+	void (*start_delivery)(struct mvs_info *mvi, u32 tx);
+	u32 (*rx_update)(struct mvs_info *mvi);
+	void (*int_full)(struct mvs_info *mvi);
+	u8 (*assign_reg_set)(struct mvs_info *mvi, u8 *tfs);
+	void (*free_reg_set)(struct mvs_info *mvi, u8 *tfs);
+	u32 (*prd_size)(void);
+	u32 (*prd_count)(void);
+	void (*make_prd)(struct scatterlist *scatter, int nr, void *prd);
+	void (*detect_porttype)(struct mvs_info *mvi, int i);
+	int (*oob_done)(struct mvs_info *mvi, int i);
+	void (*fix_phy_info)(struct mvs_info *mvi, int i,
+				struct sas_identify_frame *id);
+	void (*phy_work_around)(struct mvs_info *mvi, int i);
+	void (*phy_set_link_rate)(struct mvs_info *mvi, u32 phy_id,
+				struct sas_phy_linkrates *rates);
+	u32 (*phy_max_link_rate)(void);
+	void (*phy_disable)(struct mvs_info *mvi, u32 phy_id);
+	void (*phy_enable)(struct mvs_info *mvi, u32 phy_id);
+	void (*phy_reset)(struct mvs_info *mvi, u32 phy_id, int hard);
+	void (*stp_reset)(struct mvs_info *mvi, u32 phy_id);
+	void (*clear_active_cmds)(struct mvs_info *mvi);
+	u32 (*spi_read_data)(struct mvs_info *mvi);
+	void (*spi_write_data)(struct mvs_info *mvi, u32 data);
+	int (*spi_buildcmd)(struct mvs_info *mvi,
+						u32      *dwCmd,
+						u8       cmd,
+						u8       read,
+						u8       length,
+						u32      addr
+						);
+	int (*spi_issuecmd)(struct mvs_info *mvi, u32 cmd);
+	int (*spi_waitdataready)(struct mvs_info *mvi, u32 timeout);
+	void (*dma_fix)(struct mvs_info *mvi, u32 phy_mask,
+				int buf_len, int from, void *prd);
+	void (*tune_interrupt)(struct mvs_info *mvi, u32 time);
+	void (*non_spec_ncq_error)(struct mvs_info *mvi);
+	int (*gpio_write)(struct mvs_prv_info *mvs_prv, u8 reg_type,
+			u8 reg_index, u8 reg_count, u8 *write_data);
+
+};
+
+struct mvs_chip_info {
+	u32 		n_host;
+	u32 		n_phy;
+	u32 		fis_offs;
+	u32 		fis_count;
+	u32 		srs_sz;
+	u32		sg_width;
+	u32 		slot_width;
+	const struct mvs_dispatch *dispatch;
+};
+#define MVS_MAX_SG		(1U << mvi->chip->sg_width)
+#define MVS_CHIP_SLOT_SZ	(1U << mvi->chip->slot_width)
+#define MVS_RX_FISL_SZ		\
+	(mvi->chip->fis_offs + (mvi->chip->fis_count * 0x100))
+#define MVS_CHIP_DISP		(mvi->chip->dispatch)
+
+struct mvs_err_info {
+	__le32			flags;
+	__le32			flags2;
+};
+
+struct mvs_cmd_hdr {
+	__le32			flags;	/* PRD tbl len; SAS, SATA ctl */
+	__le32			lens;	/* cmd, max resp frame len */
+	__le32			tags;	/* targ port xfer tag; tag */
+	__le32			data_len;	/* data xfer len */
+	__le64			cmd_tbl;  	/* command table address */
+	__le64			open_frame;	/* open addr frame address */
+	__le64			status_buf;	/* status buffer address */
+	__le64			prd_tbl;		/* PRD tbl address */
+	__le32			reserved[4];
+};
+
+struct mvs_port {
+	struct asd_sas_port	sas_port;
+	u8			port_attached;
+	u8			wide_port_phymap;
+	struct list_head	list;
+};
+
+struct mvs_phy {
+	struct mvs_info 		*mvi;
+	struct mvs_port		*port;
+	struct asd_sas_phy	sas_phy;
+	struct sas_identify	identify;
+	struct scsi_device	*sdev;
+	struct timer_list timer;
+	u64		dev_sas_addr;
+	u64		att_dev_sas_addr;
+	u32		att_dev_info;
+	u32		dev_info;
+	u32		phy_type;
+	u32		phy_status;
+	u32		irq_status;
+	u32		frame_rcvd_size;
+	u8		frame_rcvd[32];
+	u8		phy_attached;
+	u8		phy_mode;
+	u8		reserved[2];
+	u32		phy_event;
+	enum sas_linkrate	minimum_linkrate;
+	enum sas_linkrate	maximum_linkrate;
+};
+
+struct mvs_device {
+	struct list_head		dev_entry;
+	enum sas_device_type dev_type;
+	struct mvs_info *mvi_info;
+	struct domain_device *sas_device;
+	u32 attached_phy;
+	u32 device_id;
+	u32 running_req;
+	u8 taskfileset;
+	u8 dev_status;
+	u16 reserved;
+};
+
+/* Generate  PHY tunning parameters */
+struct phy_tuning {
+	/* 1 bit,  transmitter emphasis enable	*/
+	u8	trans_emp_en:1;
+	/* 4 bits, transmitter emphasis amplitude */
+	u8	trans_emp_amp:4;
+	/* 3 bits, reserved space */
+	u8	Reserved_2bit_1:3;
+	/* 5 bits, transmitter amplitude */
+	u8	trans_amp:5;
+	/* 2 bits, transmitter amplitude adjust */
+	u8	trans_amp_adj:2;
+	/* 1 bit, reserved space */
+	u8	resv_2bit_2:1;
+	/* 2 bytes, reserved space */
+	u8	reserved[2];
+};
+
+struct ffe_control {
+	/* 4 bits,  FFE Capacitor Select  (value range 0~F)  */
+	u8 ffe_cap_sel:4;
+	/* 3 bits,  FFE Resistor Select (value range 0~7) */
+	u8 ffe_rss_sel:3;
+	/* 1 bit reserve*/
+	u8 reserved:1;
+};
+
+/*
+ * HBA_Info_Page is saved in Flash/NVRAM, total 256 bytes.
+ * The data area is valid only Signature="MRVL".
+ * If any member fills with 0xFF, the member is invalid.
+ */
+struct hba_info_page {
+	/* Dword 0 */
+	/* 4 bytes, structure signature,should be "MRVL" at first initial */
+	u8 signature[4];
+
+	/* Dword 1-13 */
+	u32 reserved1[13];
+
+	/* Dword 14-29 */
+	/* 64 bytes, SAS address for each port */
+	u64 sas_addr[8];
+
+	/* Dword 30-31 */
+	/* 8 bytes for vanir 8 port PHY FFE seeting
+	 * BIT 0~3 : FFE Capacitor select(value range 0~F)
+	 * BIT 4~6 : FFE Resistor select(value range 0~7)
+	 * BIT 7: reserve.
+	 */
+
+	struct ffe_control  ffe_ctl[8];
+	/* Dword 32 -43 */
+	u32 reserved2[12];
+
+	/* Dword 44-45 */
+	/* 8 bytes,  0:  1.5G, 1: 3.0G, should be 0x01 at first initial */
+	u8 phy_rate[8];
+
+	/* Dword 46-53 */
+	/* 32 bytes, PHY tuning parameters for each PHY*/
+	struct phy_tuning   phy_tuning[8];
+
+	/* Dword 54-63 */
+	u32 reserved3[10];
+};	/* total 256 bytes */
+
+struct mvs_slot_info {
+	struct list_head entry;
+	union {
+		struct sas_task *task;
+		void *tdata;
+	};
+	u32 n_elem;
+	u32 tx;
+	u32 slot_tag;
+
+	/* DMA buffer for storing cmd tbl, open addr frame, status buffer,
+	 * and PRD table
+	 */
+	void *buf;
+	dma_addr_t buf_dma;
+	void *response;
+	struct mvs_port *port;
+	struct mvs_device	*device;
+	void *open_frame;
+};
+
+struct mvs_info {
+	unsigned long flags;
+
+	/* host-wide lock */
+	spinlock_t lock;
+
+	/* our device */
+	struct pci_dev *pdev;
+	struct device *dev;
+
+	/* enhanced mode registers */
+	void __iomem *regs;
+
+	/* peripheral or soc registers */
+	void __iomem *regs_ex;
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* SCSI/SAS glue */
+	struct sas_ha_struct *sas;
+	struct Scsi_Host *shost;
+
+	/* TX (delivery) DMA ring */
+	__le32 *tx;
+	dma_addr_t tx_dma;
+
+	/* cached next-producer idx */
+	u32 tx_prod;
+
+	/* RX (completion) DMA ring */
+	__le32	*rx;
+	dma_addr_t rx_dma;
+
+	/* RX consumer idx */
+	u32 rx_cons;
+
+	/* RX'd FIS area */
+	__le32 *rx_fis;
+	dma_addr_t rx_fis_dma;
+
+	/* DMA command header slots */
+	struct mvs_cmd_hdr *slot;
+	dma_addr_t slot_dma;
+
+	u32 chip_id;
+	const struct mvs_chip_info *chip;
+
+	int tags_num;
+	unsigned long *tags;
+	/* further per-slot information */
+	struct mvs_phy phy[MVS_MAX_PHYS];
+	struct mvs_port port[MVS_MAX_PHYS];
+	u32 id;
+	u64 sata_reg_set;
+	struct list_head *hba_list;
+	struct list_head soc_entry;
+	struct list_head wq_list;
+	unsigned long instance;
+	u16 flashid;
+	u32 flashsize;
+	u32 flashsectSize;
+
+	void *addon;
+	struct hba_info_page hba_info_param;
+	struct mvs_device	devices[MVS_MAX_DEVICES];
+	void *bulk_buffer;
+	dma_addr_t bulk_buffer_dma;
+	void *bulk_buffer1;
+	dma_addr_t bulk_buffer_dma1;
+#define TRASH_BUCKET_SIZE    	0x20000
+	void *dma_pool;
+	struct mvs_slot_info slot_info[];
+};
+
+struct mvs_prv_info{
+	u8 n_host;
+	u8 n_phy;
+	u8 scan_finished;
+	u8 reserve;
+	struct mvs_info *mvi[2];
+	struct tasklet_struct mv_tasklet;
+};
+
+struct mvs_wq {
+	struct delayed_work work_q;
+	struct mvs_info *mvi;
+	void *data;
+	int handler;
+	struct list_head entry;
+};
+
+struct mvs_task_exec_info {
+	struct sas_task *task;
+	struct mvs_cmd_hdr *hdr;
+	struct mvs_port *port;
+	u32 tag;
+	int n_elem;
+};
+
+/******************** function prototype *********************/
+void mvs_get_sas_addr(void *buf, u32 buflen);
+void mvs_tag_clear(struct mvs_info *mvi, u32 tag);
+void mvs_tag_free(struct mvs_info *mvi, u32 tag);
+void mvs_tag_set(struct mvs_info *mvi, unsigned int tag);
+int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out);
+void mvs_tag_init(struct mvs_info *mvi);
+void mvs_iounmap(void __iomem *regs);
+int mvs_ioremap(struct mvs_info *mvi, int bar, int bar_ex);
+void mvs_phys_reset(struct mvs_info *mvi, u32 phy_mask, int hard);
+int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+			void *funcdata);
+void mvs_set_sas_addr(struct mvs_info *mvi, int port_id, u32 off_lo,
+		      u32 off_hi, u64 sas_addr);
+void mvs_scan_start(struct Scsi_Host *shost);
+int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time);
+int mvs_queue_command(struct sas_task *task, gfp_t gfp_flags);
+int mvs_abort_task(struct sas_task *task);
+void mvs_port_formed(struct asd_sas_phy *sas_phy);
+void mvs_port_deformed(struct asd_sas_phy *sas_phy);
+int mvs_dev_found(struct domain_device *dev);
+void mvs_dev_gone(struct domain_device *dev);
+int mvs_lu_reset(struct domain_device *dev, u8 *lun);
+int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags);
+int mvs_I_T_nexus_reset(struct domain_device *dev);
+int mvs_query_task(struct sas_task *task);
+void mvs_release_task(struct mvs_info *mvi,
+			struct domain_device *dev);
+void mvs_do_release_task(struct mvs_info *mvi, int phy_no,
+			struct domain_device *dev);
+void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events);
+void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
+int mvs_int_rx(struct mvs_info *mvi, bool self_clear);
+struct mvs_device *mvs_find_dev_by_reg_set(struct mvs_info *mvi, u8 reg_set);
+int mvs_gpio_write(struct sas_ha_struct *, u8 reg_type, u8 reg_index,
+			u8 reg_count, u8 *write_data);
+#endif
+