Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1641 insertions, 0 deletions

diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
new file mode 100644
index 000000000..f569cf009
--- /dev/null
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -0,0 +1,1641 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* 
+ *  Parallel SCSI (SPI) transport specific attributes exported to sysfs.
+ *
+ *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
+ *  Copyright (c) 2004, 2005 James Bottomley <James.Bottomley@SteelEye.com>
+ */
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/blkdev.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <scsi/scsi.h>
+#include "scsi_priv.h"
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_spi.h>
+
+#define SPI_NUM_ATTRS 14	/* increase this if you add attributes */
+#define SPI_OTHER_ATTRS 1	/* Increase this if you add "always
+				 * on" attributes */
+#define SPI_HOST_ATTRS	1
+
+#define SPI_MAX_ECHO_BUFFER_SIZE	4096
+
+#define DV_LOOPS	3
+#define DV_TIMEOUT	(10*HZ)
+#define DV_RETRIES	3	/* should only need at most 
+				 * two cc/ua clears */
+
+/* Our blacklist flags */
+enum {
+	SPI_BLIST_NOIUS = (__force blist_flags_t)0x1,
+};
+
+/* blacklist table, modelled on scsi_devinfo.c */
+static struct {
+	char *vendor;
+	char *model;
+	blist_flags_t flags;
+} spi_static_device_list[] __initdata = {
+	{"HP", "Ultrium 3-SCSI", SPI_BLIST_NOIUS },
+	{"IBM", "ULTRIUM-TD3", SPI_BLIST_NOIUS },
+	{NULL, NULL, 0}
+};
+
+/* Private data accessors (keep these out of the header file) */
+#define spi_dv_in_progress(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_in_progress)
+#define spi_dv_mutex(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_mutex)
+
+struct spi_internal {
+	struct scsi_transport_template t;
+	struct spi_function_template *f;
+};
+
+#define to_spi_internal(tmpl)	container_of(tmpl, struct spi_internal, t)
+
+static const int ppr_to_ps[] = {
+	/* The PPR values 0-6 are reserved, fill them in when
+	 * the committee defines them */
+	-1,			/* 0x00 */
+	-1,			/* 0x01 */
+	-1,			/* 0x02 */
+	-1,			/* 0x03 */
+	-1,			/* 0x04 */
+	-1,			/* 0x05 */
+	-1,			/* 0x06 */
+	 3125,			/* 0x07 */
+	 6250,			/* 0x08 */
+	12500,			/* 0x09 */
+	25000,			/* 0x0a */
+	30300,			/* 0x0b */
+	50000,			/* 0x0c */
+};
+/* The PPR values at which you calculate the period in ns by multiplying
+ * by 4 */
+#define SPI_STATIC_PPR	0x0c
+
+static int sprint_frac(char *dest, int value, int denom)
+{
+	int frac = value % denom;
+	int result = sprintf(dest, "%d", value / denom);
+
+	if (frac == 0)
+		return result;
+	dest[result++] = '.';
+
+	do {
+		denom /= 10;
+		sprintf(dest + result, "%d", frac / denom);
+		result++;
+		frac %= denom;
+	} while (frac);
+
+	dest[result++] = '\0';
+	return result;
+}
+
+static int spi_execute(struct scsi_device *sdev, const void *cmd,
+		       enum dma_data_direction dir,
+		       void *buffer, unsigned bufflen,
+		       struct scsi_sense_hdr *sshdr)
+{
+	int i, result;
+	unsigned char sense[SCSI_SENSE_BUFFERSIZE];
+	struct scsi_sense_hdr sshdr_tmp;
+
+	if (!sshdr)
+		sshdr = &sshdr_tmp;
+
+	for(i = 0; i < DV_RETRIES; i++) {
+		/*
+		 * The purpose of the RQF_PM flag below is to bypass the
+		 * SDEV_QUIESCE state.
+		 */
+		result = scsi_execute(sdev, cmd, dir, buffer, bufflen, sense,
+				      sshdr, DV_TIMEOUT, /* retries */ 1,
+				      REQ_FAILFAST_DEV |
+				      REQ_FAILFAST_TRANSPORT |
+				      REQ_FAILFAST_DRIVER,
+				      RQF_PM, NULL);
+		if (result < 0 || !scsi_sense_valid(sshdr) ||
+		    sshdr->sense_key != UNIT_ATTENTION)
+			break;
+	}
+	return result;
+}
+
+static struct {
+	enum spi_signal_type	value;
+	char			*name;
+} signal_types[] = {
+	{ SPI_SIGNAL_UNKNOWN, "unknown" },
+	{ SPI_SIGNAL_SE, "SE" },
+	{ SPI_SIGNAL_LVD, "LVD" },
+	{ SPI_SIGNAL_HVD, "HVD" },
+};
+
+static inline const char *spi_signal_to_string(enum spi_signal_type type)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(signal_types); i++) {
+		if (type == signal_types[i].value)
+			return signal_types[i].name;
+	}
+	return NULL;
+}
+static inline enum spi_signal_type spi_signal_to_value(const char *name)
+{
+	int i, len;
+
+	for (i = 0; i < ARRAY_SIZE(signal_types); i++) {
+		len =  strlen(signal_types[i].name);
+		if (strncmp(name, signal_types[i].name, len) == 0 &&
+		    (name[len] == '\n' || name[len] == '\0'))
+			return signal_types[i].value;
+	}
+	return SPI_SIGNAL_UNKNOWN;
+}
+
+static int spi_host_setup(struct transport_container *tc, struct device *dev,
+			  struct device *cdev)
+{
+	struct Scsi_Host *shost = dev_to_shost(dev);
+
+	spi_signalling(shost) = SPI_SIGNAL_UNKNOWN;
+
+	return 0;
+}
+
+static int spi_host_configure(struct transport_container *tc,
+			      struct device *dev,
+			      struct device *cdev);
+
+static DECLARE_TRANSPORT_CLASS(spi_host_class,
+			       "spi_host",
+			       spi_host_setup,
+			       NULL,
+			       spi_host_configure);
+
+static int spi_host_match(struct attribute_container *cont,
+			  struct device *dev)
+{
+	struct Scsi_Host *shost;
+
+	if (!scsi_is_host_device(dev))
+		return 0;
+
+	shost = dev_to_shost(dev);
+	if (!shost->transportt  || shost->transportt->host_attrs.ac.class
+	    != &spi_host_class.class)
+		return 0;
+
+	return &shost->transportt->host_attrs.ac == cont;
+}
+
+static int spi_target_configure(struct transport_container *tc,
+				struct device *dev,
+				struct device *cdev);
+
+static int spi_device_configure(struct transport_container *tc,
+				struct device *dev,
+				struct device *cdev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	struct scsi_target *starget = sdev->sdev_target;
+	blist_flags_t bflags;
+
+	bflags = scsi_get_device_flags_keyed(sdev, &sdev->inquiry[8],
+					     &sdev->inquiry[16],
+					     SCSI_DEVINFO_SPI);
+
+	/* Populate the target capability fields with the values
+	 * gleaned from the device inquiry */
+
+	spi_support_sync(starget) = scsi_device_sync(sdev);
+	spi_support_wide(starget) = scsi_device_wide(sdev);
+	spi_support_dt(starget) = scsi_device_dt(sdev);
+	spi_support_dt_only(starget) = scsi_device_dt_only(sdev);
+	spi_support_ius(starget) = scsi_device_ius(sdev);
+	if (bflags & SPI_BLIST_NOIUS) {
+		dev_info(dev, "Information Units disabled by blacklist\n");
+		spi_support_ius(starget) = 0;
+	}
+	spi_support_qas(starget) = scsi_device_qas(sdev);
+
+	return 0;
+}
+
+static int spi_setup_transport_attrs(struct transport_container *tc,
+				     struct device *dev,
+				     struct device *cdev)
+{
+	struct scsi_target *starget = to_scsi_target(dev);
+
+	spi_period(starget) = -1;	/* illegal value */
+	spi_min_period(starget) = 0;
+	spi_offset(starget) = 0;	/* async */
+	spi_max_offset(starget) = 255;
+	spi_width(starget) = 0;	/* narrow */
+	spi_max_width(starget) = 1;
+	spi_iu(starget) = 0;	/* no IU */
+	spi_max_iu(starget) = 1;
+	spi_dt(starget) = 0;	/* ST */
+	spi_qas(starget) = 0;
+	spi_max_qas(starget) = 1;
+	spi_wr_flow(starget) = 0;
+	spi_rd_strm(starget) = 0;
+	spi_rti(starget) = 0;
+	spi_pcomp_en(starget) = 0;
+	spi_hold_mcs(starget) = 0;
+	spi_dv_pending(starget) = 0;
+	spi_dv_in_progress(starget) = 0;
+	spi_initial_dv(starget) = 0;
+	mutex_init(&spi_dv_mutex(starget));
+
+	return 0;
+}
+
+#define spi_transport_show_simple(field, format_string)			\
+									\
+static ssize_t								\
+show_spi_transport_##field(struct device *dev, 			\
+			   struct device_attribute *attr, char *buf)	\
+{									\
+	struct scsi_target *starget = transport_class_to_starget(dev);	\
+	struct spi_transport_attrs *tp;					\
+									\
+	tp = (struct spi_transport_attrs *)&starget->starget_data;	\
+	return snprintf(buf, 20, format_string, tp->field);		\
+}
+
+#define spi_transport_store_simple(field, format_string)		\
+									\
+static ssize_t								\
+store_spi_transport_##field(struct device *dev, 			\
+			    struct device_attribute *attr, 		\
+			    const char *buf, size_t count)		\
+{									\
+	int val;							\
+	struct scsi_target *starget = transport_class_to_starget(dev);	\
+	struct spi_transport_attrs *tp;					\
+									\
+	tp = (struct spi_transport_attrs *)&starget->starget_data;	\
+	val = simple_strtoul(buf, NULL, 0);				\
+	tp->field = val;						\
+	return count;							\
+}
+
+#define spi_transport_show_function(field, format_string)		\
+									\
+static ssize_t								\
+show_spi_transport_##field(struct device *dev, 			\
+			   struct device_attribute *attr, char *buf)	\
+{									\
+	struct scsi_target *starget = transport_class_to_starget(dev);	\
+	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);	\
+	struct spi_transport_attrs *tp;					\
+	struct spi_internal *i = to_spi_internal(shost->transportt);	\
+	tp = (struct spi_transport_attrs *)&starget->starget_data;	\
+	if (i->f->get_##field)						\
+		i->f->get_##field(starget);				\
+	return snprintf(buf, 20, format_string, tp->field);		\
+}
+
+#define spi_transport_store_function(field, format_string)		\
+static ssize_t								\
+store_spi_transport_##field(struct device *dev, 			\
+			    struct device_attribute *attr,		\
+			    const char *buf, size_t count)		\
+{									\
+	int val;							\
+	struct scsi_target *starget = transport_class_to_starget(dev);	\
+	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);	\
+	struct spi_internal *i = to_spi_internal(shost->transportt);	\
+									\
+	if (!i->f->set_##field)						\
+		return -EINVAL;						\
+	val = simple_strtoul(buf, NULL, 0);				\
+	i->f->set_##field(starget, val);				\
+	return count;							\
+}
+
+#define spi_transport_store_max(field, format_string)			\
+static ssize_t								\
+store_spi_transport_##field(struct device *dev, 			\
+			    struct device_attribute *attr,		\
+			    const char *buf, size_t count)		\
+{									\
+	int val;							\
+	struct scsi_target *starget = transport_class_to_starget(dev);	\
+	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);	\
+	struct spi_internal *i = to_spi_internal(shost->transportt);	\
+	struct spi_transport_attrs *tp					\
+		= (struct spi_transport_attrs *)&starget->starget_data;	\
+									\
+	if (!i->f->set_##field)						\
+		return -EINVAL;						\
+	val = simple_strtoul(buf, NULL, 0);				\
+	if (val > tp->max_##field)					\
+		val = tp->max_##field;					\
+	i->f->set_##field(starget, val);				\
+	return count;							\
+}
+
+#define spi_transport_rd_attr(field, format_string)			\
+	spi_transport_show_function(field, format_string)		\
+	spi_transport_store_function(field, format_string)		\
+static DEVICE_ATTR(field, S_IRUGO,				\
+		   show_spi_transport_##field,			\
+		   store_spi_transport_##field);
+
+#define spi_transport_simple_attr(field, format_string)			\
+	spi_transport_show_simple(field, format_string)			\
+	spi_transport_store_simple(field, format_string)		\
+static DEVICE_ATTR(field, S_IRUGO,				\
+		   show_spi_transport_##field,			\
+		   store_spi_transport_##field);
+
+#define spi_transport_max_attr(field, format_string)			\
+	spi_transport_show_function(field, format_string)		\
+	spi_transport_store_max(field, format_string)			\
+	spi_transport_simple_attr(max_##field, format_string)		\
+static DEVICE_ATTR(field, S_IRUGO,				\
+		   show_spi_transport_##field,			\
+		   store_spi_transport_##field);
+
+/* The Parallel SCSI Tranport Attributes: */
+spi_transport_max_attr(offset, "%d\n");
+spi_transport_max_attr(width, "%d\n");
+spi_transport_max_attr(iu, "%d\n");
+spi_transport_rd_attr(dt, "%d\n");
+spi_transport_max_attr(qas, "%d\n");
+spi_transport_rd_attr(wr_flow, "%d\n");
+spi_transport_rd_attr(rd_strm, "%d\n");
+spi_transport_rd_attr(rti, "%d\n");
+spi_transport_rd_attr(pcomp_en, "%d\n");
+spi_transport_rd_attr(hold_mcs, "%d\n");
+
+/* we only care about the first child device that's a real SCSI device
+ * so we return 1 to terminate the iteration when we find it */
+static int child_iter(struct device *dev, void *data)
+{
+	if (!scsi_is_sdev_device(dev))
+		return 0;
+
+	spi_dv_device(to_scsi_device(dev));
+	return 1;
+}
+
+static ssize_t
+store_spi_revalidate(struct device *dev, struct device_attribute *attr,
+		     const char *buf, size_t count)
+{
+	struct scsi_target *starget = transport_class_to_starget(dev);
+
+	device_for_each_child(&starget->dev, NULL, child_iter);
+	return count;
+}
+static DEVICE_ATTR(revalidate, S_IWUSR, NULL, store_spi_revalidate);
+
+/* Translate the period into ns according to the current spec
+ * for SDTR/PPR messages */
+static int period_to_str(char *buf, int period)
+{
+	int len, picosec;
+
+	if (period < 0 || period > 0xff) {
+		picosec = -1;
+	} else if (period <= SPI_STATIC_PPR) {
+		picosec = ppr_to_ps[period];
+	} else {
+		picosec = period * 4000;
+	}
+
+	if (picosec == -1) {
+		len = sprintf(buf, "reserved");
+	} else {
+		len = sprint_frac(buf, picosec, 1000);
+	}
+
+	return len;
+}
+
+static ssize_t
+show_spi_transport_period_helper(char *buf, int period)
+{
+	int len = period_to_str(buf, period);
+	buf[len++] = '\n';
+	buf[len] = '\0';
+	return len;
+}
+
+static ssize_t
+store_spi_transport_period_helper(struct device *dev, const char *buf,
+				  size_t count, int *periodp)
+{
+	int j, picosec, period = -1;
+	char *endp;
+
+	picosec = simple_strtoul(buf, &endp, 10) * 1000;
+	if (*endp == '.') {
+		int mult = 100;
+		do {
+			endp++;
+			if (!isdigit(*endp))
+				break;
+			picosec += (*endp - '0') * mult;
+			mult /= 10;
+		} while (mult > 0);
+	}
+
+	for (j = 0; j <= SPI_STATIC_PPR; j++) {
+		if (ppr_to_ps[j] < picosec)
+			continue;
+		period = j;
+		break;
+	}
+
+	if (period == -1)
+		period = picosec / 4000;
+
+	if (period > 0xff)
+		period = 0xff;
+
+	*periodp = period;
+
+	return count;
+}
+
+static ssize_t
+show_spi_transport_period(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct scsi_target *starget = transport_class_to_starget(dev);
+	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+	struct spi_internal *i = to_spi_internal(shost->transportt);
+	struct spi_transport_attrs *tp =
+		(struct spi_transport_attrs *)&starget->starget_data;
+
+	if (i->f->get_period)
+		i->f->get_period(starget);
+
+	return show_spi_transport_period_helper(buf, tp->period);
+}
+
+static ssize_t
+store_spi_transport_period(struct device *cdev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct scsi_target *starget = transport_class_to_starget(cdev);
+	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+	struct spi_internal *i = to_spi_internal(shost->transportt);
+	struct spi_transport_attrs *tp =
+		(struct spi_transport_attrs *)&starget->starget_data;
+	int period, retval;
+
+	if (!i->f->set_period)
+		return -EINVAL;
+
+	retval = store_spi_transport_period_helper(cdev, buf, count, &period);
+
+	if (period < tp->min_period)
+		period = tp->min_period;
+
+	i->f->set_period(starget, period);
+
+	return retval;
+}
+
+static DEVICE_ATTR(period, S_IRUGO,
+		   show_spi_transport_period,
+		   store_spi_transport_period);
+
+static ssize_t
+show_spi_transport_min_period(struct device *cdev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct scsi_target *starget = transport_class_to_starget(cdev);
+	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+	struct spi_internal *i = to_spi_internal(shost->transportt);
+	struct spi_transport_attrs *tp =
+		(struct spi_transport_attrs *)&starget->starget_data;
+
+	if (!i->f->set_period)
+		return -EINVAL;
+
+	return show_spi_transport_period_helper(buf, tp->min_period);
+}
+
+static ssize_t
+store_spi_transport_min_period(struct device *cdev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct scsi_target *starget = transport_class_to_starget(cdev);
+	struct spi_transport_attrs *tp =
+		(struct spi_transport_attrs *)&starget->starget_data;
+
+	return store_spi_transport_period_helper(cdev, buf, count,
+						 &tp->min_period);
+}
+
+
+static DEVICE_ATTR(min_period, S_IRUGO,
+		   show_spi_transport_min_period,
+		   store_spi_transport_min_period);
+
+
+static ssize_t show_spi_host_signalling(struct device *cdev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct Scsi_Host *shost = transport_class_to_shost(cdev);
+	struct spi_internal *i = to_spi_internal(shost->transportt);
+
+	if (i->f->get_signalling)
+		i->f->get_signalling(shost);
+
+	return sprintf(buf, "%s\n", spi_signal_to_string(spi_signalling(shost)));
+}
+static ssize_t store_spi_host_signalling(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct Scsi_Host *shost = transport_class_to_shost(dev);
+	struct spi_internal *i = to_spi_internal(shost->transportt);
+	enum spi_signal_type type = spi_signal_to_value(buf);
+
+	if (!i->f->set_signalling)
+		return -EINVAL;
+
+	if (type != SPI_SIGNAL_UNKNOWN)
+		i->f->set_signalling(shost, type);
+
+	return count;
+}
+static DEVICE_ATTR(signalling, S_IRUGO,
+		   show_spi_host_signalling,
+		   store_spi_host_signalling);
+
+static ssize_t show_spi_host_width(struct device *cdev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	struct Scsi_Host *shost = transport_class_to_shost(cdev);
+
+	return sprintf(buf, "%s\n", shost->max_id == 16 ? "wide" : "narrow");
+}
+static DEVICE_ATTR(host_width, S_IRUGO,
+		   show_spi_host_width, NULL);
+
+static ssize_t show_spi_host_hba_id(struct device *cdev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct Scsi_Host *shost = transport_class_to_shost(cdev);
+
+	return sprintf(buf, "%d\n", shost->this_id);
+}
+static DEVICE_ATTR(hba_id, S_IRUGO,
+		   show_spi_host_hba_id, NULL);
+
+#define DV_SET(x, y)			\
+	if(i->f->set_##x)		\
+		i->f->set_##x(sdev->sdev_target, y)
+
+enum spi_compare_returns {
+	SPI_COMPARE_SUCCESS,
+	SPI_COMPARE_FAILURE,
+	SPI_COMPARE_SKIP_TEST,
+};
+
+
+/* This is for read/write Domain Validation:  If the device supports
+ * an echo buffer, we do read/write tests to it */
+static enum spi_compare_returns
+spi_dv_device_echo_buffer(struct scsi_device *sdev, u8 *buffer,
+			  u8 *ptr, const int retries)
+{
+	int len = ptr - buffer;
+	int j, k, r, result;
+	unsigned int pattern = 0x0000ffff;
+	struct scsi_sense_hdr sshdr;
+
+	const char spi_write_buffer[] = {
+		WRITE_BUFFER, 0x0a, 0, 0, 0, 0, 0, len >> 8, len & 0xff, 0
+	};
+	const char spi_read_buffer[] = {
+		READ_BUFFER, 0x0a, 0, 0, 0, 0, 0, len >> 8, len & 0xff, 0
+	};
+
+	/* set up the pattern buffer.  Doesn't matter if we spill
+	 * slightly beyond since that's where the read buffer is */
+	for (j = 0; j < len; ) {
+
+		/* fill the buffer with counting (test a) */
+		for ( ; j < min(len, 32); j++)
+			buffer[j] = j;
+		k = j;
+		/* fill the buffer with alternating words of 0x0 and
+		 * 0xffff (test b) */
+		for ( ; j < min(len, k + 32); j += 2) {
+			u16 *word = (u16 *)&buffer[j];
+			
+			*word = (j & 0x02) ? 0x0000 : 0xffff;
+		}
+		k = j;
+		/* fill with crosstalk (alternating 0x5555 0xaaa)
+                 * (test c) */
+		for ( ; j < min(len, k + 32); j += 2) {
+			u16 *word = (u16 *)&buffer[j];
+
+			*word = (j & 0x02) ? 0x5555 : 0xaaaa;
+		}
+		k = j;
+		/* fill with shifting bits (test d) */
+		for ( ; j < min(len, k + 32); j += 4) {
+			u32 *word = (unsigned int *)&buffer[j];
+			u32 roll = (pattern & 0x80000000) ? 1 : 0;
+			
+			*word = pattern;
+			pattern = (pattern << 1) | roll;
+		}
+		/* don't bother with random data (test e) */
+	}
+
+	for (r = 0; r < retries; r++) {
+		result = spi_execute(sdev, spi_write_buffer, DMA_TO_DEVICE,
+				     buffer, len, &sshdr);
+		if(result || !scsi_device_online(sdev)) {
+
+			scsi_device_set_state(sdev, SDEV_QUIESCE);
+			if (scsi_sense_valid(&sshdr)
+			    && sshdr.sense_key == ILLEGAL_REQUEST
+			    /* INVALID FIELD IN CDB */
+			    && sshdr.asc == 0x24 && sshdr.ascq == 0x00)
+				/* This would mean that the drive lied
+				 * to us about supporting an echo
+				 * buffer (unfortunately some Western
+				 * Digital drives do precisely this)
+				 */
+				return SPI_COMPARE_SKIP_TEST;
+
+
+			sdev_printk(KERN_ERR, sdev, "Write Buffer failure %x\n", result);
+			return SPI_COMPARE_FAILURE;
+		}
+
+		memset(ptr, 0, len);
+		spi_execute(sdev, spi_read_buffer, DMA_FROM_DEVICE,
+			    ptr, len, NULL);
+		scsi_device_set_state(sdev, SDEV_QUIESCE);
+
+		if (memcmp(buffer, ptr, len) != 0)
+			return SPI_COMPARE_FAILURE;
+	}
+	return SPI_COMPARE_SUCCESS;
+}
+
+/* This is for the simplest form of Domain Validation: a read test
+ * on the inquiry data from the device */
+static enum spi_compare_returns
+spi_dv_device_compare_inquiry(struct scsi_device *sdev, u8 *buffer,
+			      u8 *ptr, const int retries)
+{
+	int r, result;
+	const int len = sdev->inquiry_len;
+	const char spi_inquiry[] = {
+		INQUIRY, 0, 0, 0, len, 0
+	};
+
+	for (r = 0; r < retries; r++) {
+		memset(ptr, 0, len);
+
+		result = spi_execute(sdev, spi_inquiry, DMA_FROM_DEVICE,
+				     ptr, len, NULL);
+		
+		if(result || !scsi_device_online(sdev)) {
+			scsi_device_set_state(sdev, SDEV_QUIESCE);
+			return SPI_COMPARE_FAILURE;
+		}
+
+		/* If we don't have the inquiry data already, the
+		 * first read gets it */
+		if (ptr == buffer) {
+			ptr += len;
+			--r;
+			continue;
+		}
+
+		if (memcmp(buffer, ptr, len) != 0)
+			/* failure */
+			return SPI_COMPARE_FAILURE;
+	}
+	return SPI_COMPARE_SUCCESS;
+}
+
+static enum spi_compare_returns
+spi_dv_retrain(struct scsi_device *sdev, u8 *buffer, u8 *ptr,
+	       enum spi_compare_returns 
+	       (*compare_fn)(struct scsi_device *, u8 *, u8 *, int))
+{
+	struct spi_internal *i = to_spi_internal(sdev->host->transportt);
+	struct scsi_target *starget = sdev->sdev_target;
+	int period = 0, prevperiod = 0; 
+	enum spi_compare_returns retval;
+
+
+	for (;;) {
+		int newperiod;
+		retval = compare_fn(sdev, buffer, ptr, DV_LOOPS);
+
+		if (retval == SPI_COMPARE_SUCCESS
+		    || retval == SPI_COMPARE_SKIP_TEST)
+			break;
+
+		/* OK, retrain, fallback */
+		if (i->f->get_iu)
+			i->f->get_iu(starget);
+		if (i->f->get_qas)
+			i->f->get_qas(starget);
+		if (i->f->get_period)
+			i->f->get_period(sdev->sdev_target);
+
+		/* Here's the fallback sequence; first try turning off
+		 * IU, then QAS (if we can control them), then finally
+		 * fall down the periods */
+		if (i->f->set_iu && spi_iu(starget)) {
+			starget_printk(KERN_ERR, starget, "Domain Validation Disabling Information Units\n");
+			DV_SET(iu, 0);
+		} else if (i->f->set_qas && spi_qas(starget)) {
+			starget_printk(KERN_ERR, starget, "Domain Validation Disabling Quick Arbitration and Selection\n");
+			DV_SET(qas, 0);
+		} else {
+			newperiod = spi_period(starget);
+			period = newperiod > period ? newperiod : period;
+			if (period < 0x0d)
+				period++;
+			else
+				period += period >> 1;
+
+			if (unlikely(period > 0xff || period == prevperiod)) {
+				/* Total failure; set to async and return */
+				starget_printk(KERN_ERR, starget, "Domain Validation Failure, dropping back to Asynchronous\n");
+				DV_SET(offset, 0);
+				return SPI_COMPARE_FAILURE;
+			}
+			starget_printk(KERN_ERR, starget, "Domain Validation detected failure, dropping back\n");
+			DV_SET(period, period);
+			prevperiod = period;
+		}
+	}
+	return retval;
+}
+
+static int
+spi_dv_device_get_echo_buffer(struct scsi_device *sdev, u8 *buffer)
+{
+	int l, result;
+
+	/* first off do a test unit ready.  This can error out 
+	 * because of reservations or some other reason.  If it
+	 * fails, the device won't let us write to the echo buffer
+	 * so just return failure */
+	
+	static const char spi_test_unit_ready[] = {
+		TEST_UNIT_READY, 0, 0, 0, 0, 0
+	};
+
+	static const char spi_read_buffer_descriptor[] = {
+		READ_BUFFER, 0x0b, 0, 0, 0, 0, 0, 0, 4, 0
+	};
+
+	
+	/* We send a set of three TURs to clear any outstanding 
+	 * unit attention conditions if they exist (Otherwise the
+	 * buffer tests won't be happy).  If the TUR still fails
+	 * (reservation conflict, device not ready, etc) just
+	 * skip the write tests */
+	for (l = 0; ; l++) {
+		result = spi_execute(sdev, spi_test_unit_ready, DMA_NONE, 
+				     NULL, 0, NULL);
+
+		if(result) {
+			if(l >= 3)
+				return 0;
+		} else {
+			/* TUR succeeded */
+			break;
+		}
+	}
+
+	result = spi_execute(sdev, spi_read_buffer_descriptor, 
+			     DMA_FROM_DEVICE, buffer, 4, NULL);
+
+	if (result)
+		/* Device has no echo buffer */
+		return 0;
+
+	return buffer[3] + ((buffer[2] & 0x1f) << 8);
+}
+
+static void
+spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
+{
+	struct spi_internal *i = to_spi_internal(sdev->host->transportt);
+	struct scsi_target *starget = sdev->sdev_target;
+	struct Scsi_Host *shost = sdev->host;
+	int len = sdev->inquiry_len;
+	int min_period = spi_min_period(starget);
+	int max_width = spi_max_width(starget);
+	/* first set us up for narrow async */
+	DV_SET(offset, 0);
+	DV_SET(width, 0);
+
+	if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS)
+	    != SPI_COMPARE_SUCCESS) {
+		starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n");
+		/* FIXME: should probably offline the device here? */
+		return;
+	}
+
+	if (!spi_support_wide(starget)) {
+		spi_max_width(starget) = 0;
+		max_width = 0;
+	}
+
+	/* test width */
+	if (i->f->set_width && max_width) {
+		i->f->set_width(starget, 1);
+
+		if (spi_dv_device_compare_inquiry(sdev, buffer,
+						   buffer + len,
+						   DV_LOOPS)
+		    != SPI_COMPARE_SUCCESS) {
+			starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n");
+			i->f->set_width(starget, 0);
+			/* Make sure we don't force wide back on by asking
+			 * for a transfer period that requires it */
+			max_width = 0;
+			if (min_period < 10)
+				min_period = 10;
+		}
+	}
+
+	if (!i->f->set_period)
+		return;
+
+	/* device can't handle synchronous */
+	if (!spi_support_sync(starget) && !spi_support_dt(starget))
+		return;
+
+	/* len == -1 is the signal that we need to ascertain the
+	 * presence of an echo buffer before trying to use it.  len ==
+	 * 0 means we don't have an echo buffer */
+	len = -1;
+
+ retry:
+
+	/* now set up to the maximum */
+	DV_SET(offset, spi_max_offset(starget));
+	DV_SET(period, min_period);
+
+	/* try QAS requests; this should be harmless to set if the
+	 * target supports it */
+	if (spi_support_qas(starget) && spi_max_qas(starget)) {
+		DV_SET(qas, 1);
+	} else {
+		DV_SET(qas, 0);
+	}
+
+	if (spi_support_ius(starget) && spi_max_iu(starget) &&
+	    min_period < 9) {
+		/* This u320 (or u640). Set IU transfers */
+		DV_SET(iu, 1);
+		/* Then set the optional parameters */
+		DV_SET(rd_strm, 1);
+		DV_SET(wr_flow, 1);
+		DV_SET(rti, 1);
+		if (min_period == 8)
+			DV_SET(pcomp_en, 1);
+	} else {
+		DV_SET(iu, 0);
+	}
+
+	/* now that we've done all this, actually check the bus
+	 * signal type (if known).  Some devices are stupid on
+	 * a SE bus and still claim they can try LVD only settings */
+	if (i->f->get_signalling)
+		i->f->get_signalling(shost);
+	if (spi_signalling(shost) == SPI_SIGNAL_SE ||
+	    spi_signalling(shost) == SPI_SIGNAL_HVD ||
+	    !spi_support_dt(starget)) {
+		DV_SET(dt, 0);
+	} else {
+		DV_SET(dt, 1);
+	}
+	/* set width last because it will pull all the other
+	 * parameters down to required values */
+	DV_SET(width, max_width);
+
+	/* Do the read only INQUIRY tests */
+	spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len,
+		       spi_dv_device_compare_inquiry);
+	/* See if we actually managed to negotiate and sustain DT */
+	if (i->f->get_dt)
+		i->f->get_dt(starget);
+
+	/* see if the device has an echo buffer.  If it does we can do
+	 * the SPI pattern write tests.  Because of some broken
+	 * devices, we *only* try this on a device that has actually
+	 * negotiated DT */
+
+	if (len == -1 && spi_dt(starget))
+		len = spi_dv_device_get_echo_buffer(sdev, buffer);
+
+	if (len <= 0) {
+		starget_printk(KERN_INFO, starget, "Domain Validation skipping write tests\n");
+		return;
+	}
+
+	if (len > SPI_MAX_ECHO_BUFFER_SIZE) {
+		starget_printk(KERN_WARNING, starget, "Echo buffer size %d is too big, trimming to %d\n", len, SPI_MAX_ECHO_BUFFER_SIZE);
+		len = SPI_MAX_ECHO_BUFFER_SIZE;
+	}
+
+	if (spi_dv_retrain(sdev, buffer, buffer + len,
+			   spi_dv_device_echo_buffer)
+	    == SPI_COMPARE_SKIP_TEST) {
+		/* OK, the stupid drive can't do a write echo buffer
+		 * test after all, fall back to the read tests */
+		len = 0;
+		goto retry;
+	}
+}
+
+
+/**	spi_dv_device - Do Domain Validation on the device
+ *	@sdev:		scsi device to validate
+ *
+ *	Performs the domain validation on the given device in the
+ *	current execution thread.  Since DV operations may sleep,
+ *	the current thread must have user context.  Also no SCSI
+ *	related locks that would deadlock I/O issued by the DV may
+ *	be held.
+ */
+void
+spi_dv_device(struct scsi_device *sdev)
+{
+	struct scsi_target *starget = sdev->sdev_target;
+	const int len = SPI_MAX_ECHO_BUFFER_SIZE*2;
+	unsigned int sleep_flags;
+	u8 *buffer;
+
+	/*
+	 * Because this function and the power management code both call
+	 * scsi_device_quiesce(), it is not safe to perform domain validation
+	 * while suspend or resume is in progress. Hence the
+	 * lock/unlock_system_sleep() calls.
+	 */
+	sleep_flags = lock_system_sleep();
+
+	if (scsi_autopm_get_device(sdev))
+		goto unlock_system_sleep;
+
+	if (unlikely(spi_dv_in_progress(starget)))
+		goto put_autopm;
+
+	if (unlikely(scsi_device_get(sdev)))
+		goto put_autopm;
+
+	spi_dv_in_progress(starget) = 1;
+
+	buffer = kzalloc(len, GFP_KERNEL);
+
+	if (unlikely(!buffer))
+		goto put_sdev;
+
+	/* We need to verify that the actual device will quiesce; the
+	 * later target quiesce is just a nice to have */
+	if (unlikely(scsi_device_quiesce(sdev)))
+		goto free_buffer;
+
+	scsi_target_quiesce(starget);
+
+	spi_dv_pending(starget) = 1;
+	mutex_lock(&spi_dv_mutex(starget));
+
+	starget_printk(KERN_INFO, starget, "Beginning Domain Validation\n");
+
+	spi_dv_device_internal(sdev, buffer);
+
+	starget_printk(KERN_INFO, starget, "Ending Domain Validation\n");
+
+	mutex_unlock(&spi_dv_mutex(starget));
+	spi_dv_pending(starget) = 0;
+
+	scsi_target_resume(starget);
+
+	spi_initial_dv(starget) = 1;
+
+free_buffer:
+	kfree(buffer);
+
+put_sdev:
+	spi_dv_in_progress(starget) = 0;
+	scsi_device_put(sdev);
+put_autopm:
+	scsi_autopm_put_device(sdev);
+
+unlock_system_sleep:
+	unlock_system_sleep(sleep_flags);
+}
+EXPORT_SYMBOL(spi_dv_device);
+
+struct work_queue_wrapper {
+	struct work_struct	work;
+	struct scsi_device	*sdev;
+};
+
+static void
+spi_dv_device_work_wrapper(struct work_struct *work)
+{
+	struct work_queue_wrapper *wqw =
+		container_of(work, struct work_queue_wrapper, work);
+	struct scsi_device *sdev = wqw->sdev;
+
+	kfree(wqw);
+	spi_dv_device(sdev);
+	spi_dv_pending(sdev->sdev_target) = 0;
+	scsi_device_put(sdev);
+}
+
+
+/**
+ *	spi_schedule_dv_device - schedule domain validation to occur on the device
+ *	@sdev:	The device to validate
+ *
+ *	Identical to spi_dv_device() above, except that the DV will be
+ *	scheduled to occur in a workqueue later.  All memory allocations
+ *	are atomic, so may be called from any context including those holding
+ *	SCSI locks.
+ */
+void
+spi_schedule_dv_device(struct scsi_device *sdev)
+{
+	struct work_queue_wrapper *wqw =
+		kmalloc(sizeof(struct work_queue_wrapper), GFP_ATOMIC);
+
+	if (unlikely(!wqw))
+		return;
+
+	if (unlikely(spi_dv_pending(sdev->sdev_target))) {
+		kfree(wqw);
+		return;
+	}
+	/* Set pending early (dv_device doesn't check it, only sets it) */
+	spi_dv_pending(sdev->sdev_target) = 1;
+	if (unlikely(scsi_device_get(sdev))) {
+		kfree(wqw);
+		spi_dv_pending(sdev->sdev_target) = 0;
+		return;
+	}
+
+	INIT_WORK(&wqw->work, spi_dv_device_work_wrapper);
+	wqw->sdev = sdev;
+
+	schedule_work(&wqw->work);
+}
+EXPORT_SYMBOL(spi_schedule_dv_device);
+
+/**
+ * spi_display_xfer_agreement - Print the current target transfer agreement
+ * @starget: The target for which to display the agreement
+ *
+ * Each SPI port is required to maintain a transfer agreement for each
+ * other port on the bus.  This function prints a one-line summary of
+ * the current agreement; more detailed information is available in sysfs.
+ */
+void spi_display_xfer_agreement(struct scsi_target *starget)
+{
+	struct spi_transport_attrs *tp;
+	tp = (struct spi_transport_attrs *)&starget->starget_data;
+
+	if (tp->offset > 0 && tp->period > 0) {
+		unsigned int picosec, kb100;
+		char *scsi = "FAST-?";
+		char tmp[8];
+
+		if (tp->period <= SPI_STATIC_PPR) {
+			picosec = ppr_to_ps[tp->period];
+			switch (tp->period) {
+				case  7: scsi = "FAST-320"; break;
+				case  8: scsi = "FAST-160"; break;
+				case  9: scsi = "FAST-80"; break;
+				case 10:
+				case 11: scsi = "FAST-40"; break;
+				case 12: scsi = "FAST-20"; break;
+			}
+		} else {
+			picosec = tp->period * 4000;
+			if (tp->period < 25)
+				scsi = "FAST-20";
+			else if (tp->period < 50)
+				scsi = "FAST-10";
+			else
+				scsi = "FAST-5";
+		}
+
+		kb100 = (10000000 + picosec / 2) / picosec;
+		if (tp->width)
+			kb100 *= 2;
+		sprint_frac(tmp, picosec, 1000);
+
+		dev_info(&starget->dev,
+			 "%s %sSCSI %d.%d MB/s %s%s%s%s%s%s%s%s (%s ns, offset %d)\n",
+			 scsi, tp->width ? "WIDE " : "", kb100/10, kb100 % 10,
+			 tp->dt ? "DT" : "ST",
+			 tp->iu ? " IU" : "",
+			 tp->qas  ? " QAS" : "",
+			 tp->rd_strm ? " RDSTRM" : "",
+			 tp->rti ? " RTI" : "",
+			 tp->wr_flow ? " WRFLOW" : "",
+			 tp->pcomp_en ? " PCOMP" : "",
+			 tp->hold_mcs ? " HMCS" : "",
+			 tmp, tp->offset);
+	} else {
+		dev_info(&starget->dev, "%sasynchronous\n",
+				tp->width ? "wide " : "");
+	}
+}
+EXPORT_SYMBOL(spi_display_xfer_agreement);
+
+int spi_populate_width_msg(unsigned char *msg, int width)
+{
+	msg[0] = EXTENDED_MESSAGE;
+	msg[1] = 2;
+	msg[2] = EXTENDED_WDTR;
+	msg[3] = width;
+	return 4;
+}
+EXPORT_SYMBOL_GPL(spi_populate_width_msg);
+
+int spi_populate_sync_msg(unsigned char *msg, int period, int offset)
+{
+	msg[0] = EXTENDED_MESSAGE;
+	msg[1] = 3;
+	msg[2] = EXTENDED_SDTR;
+	msg[3] = period;
+	msg[4] = offset;
+	return 5;
+}
+EXPORT_SYMBOL_GPL(spi_populate_sync_msg);
+
+int spi_populate_ppr_msg(unsigned char *msg, int period, int offset,
+		int width, int options)
+{
+	msg[0] = EXTENDED_MESSAGE;
+	msg[1] = 6;
+	msg[2] = EXTENDED_PPR;
+	msg[3] = period;
+	msg[4] = 0;
+	msg[5] = offset;
+	msg[6] = width;
+	msg[7] = options;
+	return 8;
+}
+EXPORT_SYMBOL_GPL(spi_populate_ppr_msg);
+
+/**
+ * spi_populate_tag_msg - place a tag message in a buffer
+ * @msg:	pointer to the area to place the tag
+ * @cmd:	pointer to the scsi command for the tag
+ *
+ * Notes:
+ *	designed to create the correct type of tag message for the 
+ *	particular request.  Returns the size of the tag message.
+ *	May return 0 if TCQ is disabled for this device.
+ **/
+int spi_populate_tag_msg(unsigned char *msg, struct scsi_cmnd *cmd)
+{
+        if (cmd->flags & SCMD_TAGGED) {
+		*msg++ = SIMPLE_QUEUE_TAG;
+		*msg++ = scsi_cmd_to_rq(cmd)->tag;
+        	return 2;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_populate_tag_msg);
+
+#ifdef CONFIG_SCSI_CONSTANTS
+static const char * const one_byte_msgs[] = {
+/* 0x00 */ "Task Complete", NULL /* Extended Message */, "Save Pointers",
+/* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error", 
+/* 0x06 */ "Abort Task Set", "Message Reject", "Nop", "Message Parity Error",
+/* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag",
+/* 0x0c */ "Target Reset", "Abort Task", "Clear Task Set", 
+/* 0x0f */ "Initiate Recovery", "Release Recovery",
+/* 0x11 */ "Terminate Process", "Continue Task", "Target Transfer Disable",
+/* 0x14 */ NULL, NULL, "Clear ACA", "LUN Reset"
+};
+
+static const char * const two_byte_msgs[] = {
+/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag",
+/* 0x23 */ "Ignore Wide Residue", "ACA"
+};
+
+static const char * const extended_msgs[] = {
+/* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request",
+/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request",
+/* 0x04 */ "Parallel Protocol Request", "Modify Bidirectional Data Pointer"
+};
+
+static void print_nego(const unsigned char *msg, int per, int off, int width)
+{
+	if (per) {
+		char buf[20];
+		period_to_str(buf, msg[per]);
+		printk("period = %s ns ", buf);
+	}
+
+	if (off)
+		printk("offset = %d ", msg[off]);
+	if (width)
+		printk("width = %d ", 8 << msg[width]);
+}
+
+static void print_ptr(const unsigned char *msg, int msb, const char *desc)
+{
+	int ptr = (msg[msb] << 24) | (msg[msb+1] << 16) | (msg[msb+2] << 8) |
+			msg[msb+3];
+	printk("%s = %d ", desc, ptr);
+}
+
+int spi_print_msg(const unsigned char *msg)
+{
+	int len = 1, i;
+	if (msg[0] == EXTENDED_MESSAGE) {
+		len = 2 + msg[1];
+		if (len == 2)
+			len += 256;
+		if (msg[2] < ARRAY_SIZE(extended_msgs))
+			printk ("%s ", extended_msgs[msg[2]]); 
+		else 
+			printk ("Extended Message, reserved code (0x%02x) ",
+				(int) msg[2]);
+		switch (msg[2]) {
+		case EXTENDED_MODIFY_DATA_POINTER:
+			print_ptr(msg, 3, "pointer");
+			break;
+		case EXTENDED_SDTR:
+			print_nego(msg, 3, 4, 0);
+			break;
+		case EXTENDED_WDTR:
+			print_nego(msg, 0, 0, 3);
+			break;
+		case EXTENDED_PPR:
+			print_nego(msg, 3, 5, 6);
+			break;
+		case EXTENDED_MODIFY_BIDI_DATA_PTR:
+			print_ptr(msg, 3, "out");
+			print_ptr(msg, 7, "in");
+			break;
+		default:
+		for (i = 2; i < len; ++i) 
+			printk("%02x ", msg[i]);
+		}
+	/* Identify */
+	} else if (msg[0] & 0x80) {
+		printk("Identify disconnect %sallowed %s %d ",
+			(msg[0] & 0x40) ? "" : "not ",
+			(msg[0] & 0x20) ? "target routine" : "lun",
+			msg[0] & 0x7);
+	/* Normal One byte */
+	} else if (msg[0] < 0x1f) {
+		if (msg[0] < ARRAY_SIZE(one_byte_msgs) && one_byte_msgs[msg[0]])
+			printk("%s ", one_byte_msgs[msg[0]]);
+		else
+			printk("reserved (%02x) ", msg[0]);
+	} else if (msg[0] == 0x55) {
+		printk("QAS Request ");
+	/* Two byte */
+	} else if (msg[0] <= 0x2f) {
+		if ((msg[0] - 0x20) < ARRAY_SIZE(two_byte_msgs))
+			printk("%s %02x ", two_byte_msgs[msg[0] - 0x20], 
+				msg[1]);
+		else 
+			printk("reserved two byte (%02x %02x) ", 
+				msg[0], msg[1]);
+		len = 2;
+	} else 
+		printk("reserved ");
+	return len;
+}
+EXPORT_SYMBOL(spi_print_msg);
+
+#else  /* ifndef CONFIG_SCSI_CONSTANTS */
+
+int spi_print_msg(const unsigned char *msg)
+{
+	int len = 1, i;
+
+	if (msg[0] == EXTENDED_MESSAGE) {
+		len = 2 + msg[1];
+		if (len == 2)
+			len += 256;
+		for (i = 0; i < len; ++i)
+			printk("%02x ", msg[i]);
+	/* Identify */
+	} else if (msg[0] & 0x80) {
+		printk("%02x ", msg[0]);
+	/* Normal One byte */
+	} else if ((msg[0] < 0x1f) || (msg[0] == 0x55)) {
+		printk("%02x ", msg[0]);
+	/* Two byte */
+	} else if (msg[0] <= 0x2f) {
+		printk("%02x %02x", msg[0], msg[1]);
+		len = 2;
+	} else 
+		printk("%02x ", msg[0]);
+	return len;
+}
+EXPORT_SYMBOL(spi_print_msg);
+#endif /* ! CONFIG_SCSI_CONSTANTS */
+
+static int spi_device_match(struct attribute_container *cont,
+			    struct device *dev)
+{
+	struct scsi_device *sdev;
+	struct Scsi_Host *shost;
+	struct spi_internal *i;
+
+	if (!scsi_is_sdev_device(dev))
+		return 0;
+
+	sdev = to_scsi_device(dev);
+	shost = sdev->host;
+	if (!shost->transportt  || shost->transportt->host_attrs.ac.class
+	    != &spi_host_class.class)
+		return 0;
+	/* Note: this class has no device attributes, so it has
+	 * no per-HBA allocation and thus we don't need to distinguish
+	 * the attribute containers for the device */
+	i = to_spi_internal(shost->transportt);
+	if (i->f->deny_binding && i->f->deny_binding(sdev->sdev_target))
+		return 0;
+	return 1;
+}
+
+static int spi_target_match(struct attribute_container *cont,
+			    struct device *dev)
+{
+	struct Scsi_Host *shost;
+	struct scsi_target *starget;
+	struct spi_internal *i;
+
+	if (!scsi_is_target_device(dev))
+		return 0;
+
+	shost = dev_to_shost(dev->parent);
+	if (!shost->transportt  || shost->transportt->host_attrs.ac.class
+	    != &spi_host_class.class)
+		return 0;
+
+	i = to_spi_internal(shost->transportt);
+	starget = to_scsi_target(dev);
+
+	if (i->f->deny_binding && i->f->deny_binding(starget))
+		return 0;
+
+	return &i->t.target_attrs.ac == cont;
+}
+
+static DECLARE_TRANSPORT_CLASS(spi_transport_class,
+			       "spi_transport",
+			       spi_setup_transport_attrs,
+			       NULL,
+			       spi_target_configure);
+
+static DECLARE_ANON_TRANSPORT_CLASS(spi_device_class,
+				    spi_device_match,
+				    spi_device_configure);
+
+static struct attribute *host_attributes[] = {
+	&dev_attr_signalling.attr,
+	&dev_attr_host_width.attr,
+	&dev_attr_hba_id.attr,
+	NULL
+};
+
+static struct attribute_group host_attribute_group = {
+	.attrs = host_attributes,
+};
+
+static int spi_host_configure(struct transport_container *tc,
+			      struct device *dev,
+			      struct device *cdev)
+{
+	struct kobject *kobj = &cdev->kobj;
+	struct Scsi_Host *shost = transport_class_to_shost(cdev);
+	struct spi_internal *si = to_spi_internal(shost->transportt);
+	struct attribute *attr = &dev_attr_signalling.attr;
+	int rc = 0;
+
+	if (si->f->set_signalling)
+		rc = sysfs_chmod_file(kobj, attr, attr->mode | S_IWUSR);
+
+	return rc;
+}
+
+/* returns true if we should be showing the variable.  Also
+ * overloads the return by setting 1<<1 if the attribute should
+ * be writeable */
+#define TARGET_ATTRIBUTE_HELPER(name) \
+	(si->f->show_##name ? S_IRUGO : 0) | \
+	(si->f->set_##name ? S_IWUSR : 0)
+
+static umode_t target_attribute_is_visible(struct kobject *kobj,
+					  struct attribute *attr, int i)
+{
+	struct device *cdev = container_of(kobj, struct device, kobj);
+	struct scsi_target *starget = transport_class_to_starget(cdev);
+	struct Scsi_Host *shost = transport_class_to_shost(cdev);
+	struct spi_internal *si = to_spi_internal(shost->transportt);
+
+	if (attr == &dev_attr_period.attr &&
+	    spi_support_sync(starget))
+		return TARGET_ATTRIBUTE_HELPER(period);
+	else if (attr == &dev_attr_min_period.attr &&
+		 spi_support_sync(starget))
+		return TARGET_ATTRIBUTE_HELPER(period);
+	else if (attr == &dev_attr_offset.attr &&
+		 spi_support_sync(starget))
+		return TARGET_ATTRIBUTE_HELPER(offset);
+	else if (attr == &dev_attr_max_offset.attr &&
+		 spi_support_sync(starget))
+		return TARGET_ATTRIBUTE_HELPER(offset);
+	else if (attr == &dev_attr_width.attr &&
+		 spi_support_wide(starget))
+		return TARGET_ATTRIBUTE_HELPER(width);
+	else if (attr == &dev_attr_max_width.attr &&
+		 spi_support_wide(starget))
+		return TARGET_ATTRIBUTE_HELPER(width);
+	else if (attr == &dev_attr_iu.attr &&
+		 spi_support_ius(starget))
+		return TARGET_ATTRIBUTE_HELPER(iu);
+	else if (attr == &dev_attr_max_iu.attr &&
+		 spi_support_ius(starget))
+		return TARGET_ATTRIBUTE_HELPER(iu);
+	else if (attr == &dev_attr_dt.attr &&
+		 spi_support_dt(starget))
+		return TARGET_ATTRIBUTE_HELPER(dt);
+	else if (attr == &dev_attr_qas.attr &&
+		 spi_support_qas(starget))
+		return TARGET_ATTRIBUTE_HELPER(qas);
+	else if (attr == &dev_attr_max_qas.attr &&
+		 spi_support_qas(starget))
+		return TARGET_ATTRIBUTE_HELPER(qas);
+	else if (attr == &dev_attr_wr_flow.attr &&
+		 spi_support_ius(starget))
+		return TARGET_ATTRIBUTE_HELPER(wr_flow);
+	else if (attr == &dev_attr_rd_strm.attr &&
+		 spi_support_ius(starget))
+		return TARGET_ATTRIBUTE_HELPER(rd_strm);
+	else if (attr == &dev_attr_rti.attr &&
+		 spi_support_ius(starget))
+		return TARGET_ATTRIBUTE_HELPER(rti);
+	else if (attr == &dev_attr_pcomp_en.attr &&
+		 spi_support_ius(starget))
+		return TARGET_ATTRIBUTE_HELPER(pcomp_en);
+	else if (attr == &dev_attr_hold_mcs.attr &&
+		 spi_support_ius(starget))
+		return TARGET_ATTRIBUTE_HELPER(hold_mcs);
+	else if (attr == &dev_attr_revalidate.attr)
+		return S_IWUSR;
+
+	return 0;
+}
+
+static struct attribute *target_attributes[] = {
+	&dev_attr_period.attr,
+	&dev_attr_min_period.attr,
+	&dev_attr_offset.attr,
+	&dev_attr_max_offset.attr,
+	&dev_attr_width.attr,
+	&dev_attr_max_width.attr,
+	&dev_attr_iu.attr,
+	&dev_attr_max_iu.attr,
+	&dev_attr_dt.attr,
+	&dev_attr_qas.attr,
+	&dev_attr_max_qas.attr,
+	&dev_attr_wr_flow.attr,
+	&dev_attr_rd_strm.attr,
+	&dev_attr_rti.attr,
+	&dev_attr_pcomp_en.attr,
+	&dev_attr_hold_mcs.attr,
+	&dev_attr_revalidate.attr,
+	NULL
+};
+
+static struct attribute_group target_attribute_group = {
+	.attrs = target_attributes,
+	.is_visible = target_attribute_is_visible,
+};
+
+static int spi_target_configure(struct transport_container *tc,
+				struct device *dev,
+				struct device *cdev)
+{
+	struct kobject *kobj = &cdev->kobj;
+
+	/* force an update based on parameters read from the device */
+	sysfs_update_group(kobj, &target_attribute_group);
+
+	return 0;
+}
+
+struct scsi_transport_template *
+spi_attach_transport(struct spi_function_template *ft)
+{
+	struct spi_internal *i = kzalloc(sizeof(struct spi_internal),
+					 GFP_KERNEL);
+
+	if (unlikely(!i))
+		return NULL;
+
+	i->t.target_attrs.ac.class = &spi_transport_class.class;
+	i->t.target_attrs.ac.grp = &target_attribute_group;
+	i->t.target_attrs.ac.match = spi_target_match;
+	transport_container_register(&i->t.target_attrs);
+	i->t.target_size = sizeof(struct spi_transport_attrs);
+	i->t.host_attrs.ac.class = &spi_host_class.class;
+	i->t.host_attrs.ac.grp = &host_attribute_group;
+	i->t.host_attrs.ac.match = spi_host_match;
+	transport_container_register(&i->t.host_attrs);
+	i->t.host_size = sizeof(struct spi_host_attrs);
+	i->f = ft;
+
+	return &i->t;
+}
+EXPORT_SYMBOL(spi_attach_transport);
+
+void spi_release_transport(struct scsi_transport_template *t)
+{
+	struct spi_internal *i = to_spi_internal(t);
+
+	transport_container_unregister(&i->t.target_attrs);
+	transport_container_unregister(&i->t.host_attrs);
+
+	kfree(i);
+}
+EXPORT_SYMBOL(spi_release_transport);
+
+static __init int spi_transport_init(void)
+{
+	int error = scsi_dev_info_add_list(SCSI_DEVINFO_SPI,
+					   "SCSI Parallel Transport Class");
+	if (!error) {
+		int i;
+
+		for (i = 0; spi_static_device_list[i].vendor; i++)
+			scsi_dev_info_list_add_keyed(1,	/* compatible */
+						     spi_static_device_list[i].vendor,
+						     spi_static_device_list[i].model,
+						     NULL,
+						     spi_static_device_list[i].flags,
+						     SCSI_DEVINFO_SPI);
+	}
+
+	error = transport_class_register(&spi_transport_class);
+	if (error)
+		return error;
+	error = anon_transport_class_register(&spi_device_class);
+	return transport_class_register(&spi_host_class);
+}
+
+static void __exit spi_transport_exit(void)
+{
+	transport_class_unregister(&spi_transport_class);
+	anon_transport_class_unregister(&spi_device_class);
+	transport_class_unregister(&spi_host_class);
+	scsi_dev_info_remove_list(SCSI_DEVINFO_SPI);
+}
+
+MODULE_AUTHOR("Martin Hicks");
+MODULE_DESCRIPTION("SPI Transport Attributes");
+MODULE_LICENSE("GPL");
+
+module_init(spi_transport_init);
+module_exit(spi_transport_exit);