Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 919 insertions, 0 deletions

diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
new file mode 100644
index 000000000..6a1428d45
--- /dev/null
+++ b/drivers/scsi/ses.c
@@ -0,0 +1,919 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SCSI Enclosure Services
+ *
+ * Copyright (C) 2008 James Bottomley <James.Bottomley@HansenPartnership.com>
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/enclosure.h>
+#include <asm/unaligned.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_driver.h>
+#include <scsi/scsi_host.h>
+
+#include <scsi/scsi_transport_sas.h>
+
+struct ses_device {
+	unsigned char *page1;
+	unsigned char *page1_types;
+	unsigned char *page2;
+	unsigned char *page10;
+	short page1_len;
+	short page1_num_types;
+	short page2_len;
+	short page10_len;
+};
+
+struct ses_component {
+	u64 addr;
+};
+
+static bool ses_page2_supported(struct enclosure_device *edev)
+{
+	struct ses_device *ses_dev = edev->scratch;
+
+	return (ses_dev->page2 != NULL);
+}
+
+static int ses_probe(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
+	int err = -ENODEV;
+
+	if (sdev->type != TYPE_ENCLOSURE)
+		goto out;
+
+	err = 0;
+	sdev_printk(KERN_NOTICE, sdev, "Attached Enclosure device\n");
+
+ out:
+	return err;
+}
+
+#define SES_TIMEOUT (30 * HZ)
+#define SES_RETRIES 3
+
+static void init_device_slot_control(unsigned char *dest_desc,
+				     struct enclosure_component *ecomp,
+				     unsigned char *status)
+{
+	memcpy(dest_desc, status, 4);
+	dest_desc[0] = 0;
+	/* only clear byte 1 for ENCLOSURE_COMPONENT_DEVICE */
+	if (ecomp->type == ENCLOSURE_COMPONENT_DEVICE)
+		dest_desc[1] = 0;
+	dest_desc[2] &= 0xde;
+	dest_desc[3] &= 0x3c;
+}
+
+
+static int ses_recv_diag(struct scsi_device *sdev, int page_code,
+			 void *buf, int bufflen)
+{
+	int ret;
+	unsigned char cmd[] = {
+		RECEIVE_DIAGNOSTIC,
+		1,		/* Set PCV bit */
+		page_code,
+		bufflen >> 8,
+		bufflen & 0xff,
+		0
+	};
+	unsigned char recv_page_code;
+	unsigned int retries = SES_RETRIES;
+	struct scsi_sense_hdr sshdr;
+
+	do {
+		ret = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, bufflen,
+				       &sshdr, SES_TIMEOUT, 1, NULL);
+	} while (ret > 0 && --retries && scsi_sense_valid(&sshdr) &&
+		 (sshdr.sense_key == NOT_READY ||
+		  (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
+
+	if (unlikely(ret))
+		return ret;
+
+	recv_page_code = ((unsigned char *)buf)[0];
+
+	if (likely(recv_page_code == page_code))
+		return ret;
+
+	/* successful diagnostic but wrong page code.  This happens to some
+	 * USB devices, just print a message and pretend there was an error */
+
+	sdev_printk(KERN_ERR, sdev,
+		    "Wrong diagnostic page; asked for %d got %u\n",
+		    page_code, recv_page_code);
+
+	return -EINVAL;
+}
+
+static int ses_send_diag(struct scsi_device *sdev, int page_code,
+			 void *buf, int bufflen)
+{
+	int result;
+
+	unsigned char cmd[] = {
+		SEND_DIAGNOSTIC,
+		0x10,		/* Set PF bit */
+		0,
+		bufflen >> 8,
+		bufflen & 0xff,
+		0
+	};
+	struct scsi_sense_hdr sshdr;
+	unsigned int retries = SES_RETRIES;
+
+	do {
+		result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, buf, bufflen,
+					  &sshdr, SES_TIMEOUT, 1, NULL);
+	} while (result > 0 && --retries && scsi_sense_valid(&sshdr) &&
+		 (sshdr.sense_key == NOT_READY ||
+		  (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29)));
+
+	if (result)
+		sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n",
+			    result);
+	return result;
+}
+
+static int ses_set_page2_descriptor(struct enclosure_device *edev,
+				      struct enclosure_component *ecomp,
+				      unsigned char *desc)
+{
+	int i, j, count = 0, descriptor = ecomp->number;
+	struct scsi_device *sdev = to_scsi_device(edev->edev.parent);
+	struct ses_device *ses_dev = edev->scratch;
+	unsigned char *type_ptr = ses_dev->page1_types;
+	unsigned char *desc_ptr = ses_dev->page2 + 8;
+
+	/* Clear everything */
+	memset(desc_ptr, 0, ses_dev->page2_len - 8);
+	for (i = 0; i < ses_dev->page1_num_types; i++, type_ptr += 4) {
+		for (j = 0; j < type_ptr[1]; j++) {
+			desc_ptr += 4;
+			if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE &&
+			    type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE)
+				continue;
+			if (count++ == descriptor) {
+				memcpy(desc_ptr, desc, 4);
+				/* set select */
+				desc_ptr[0] |= 0x80;
+				/* clear reserved, just in case */
+				desc_ptr[0] &= 0xf0;
+			}
+		}
+	}
+
+	return ses_send_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len);
+}
+
+static unsigned char *ses_get_page2_descriptor(struct enclosure_device *edev,
+				      struct enclosure_component *ecomp)
+{
+	int i, j, count = 0, descriptor = ecomp->number;
+	struct scsi_device *sdev = to_scsi_device(edev->edev.parent);
+	struct ses_device *ses_dev = edev->scratch;
+	unsigned char *type_ptr = ses_dev->page1_types;
+	unsigned char *desc_ptr = ses_dev->page2 + 8;
+
+	if (ses_recv_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len) < 0)
+		return NULL;
+
+	for (i = 0; i < ses_dev->page1_num_types; i++, type_ptr += 4) {
+		for (j = 0; j < type_ptr[1]; j++) {
+			desc_ptr += 4;
+			if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE &&
+			    type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE)
+				continue;
+			if (count++ == descriptor)
+				return desc_ptr;
+		}
+	}
+	return NULL;
+}
+
+/* For device slot and array device slot elements, byte 3 bit 6
+ * is "fault sensed" while byte 3 bit 5 is "fault reqstd". As this
+ * code stands these bits are shifted 4 positions right so in
+ * sysfs they will appear as bits 2 and 1 respectively. Strange. */
+static void ses_get_fault(struct enclosure_device *edev,
+			  struct enclosure_component *ecomp)
+{
+	unsigned char *desc;
+
+	if (!ses_page2_supported(edev)) {
+		ecomp->fault = 0;
+		return;
+	}
+	desc = ses_get_page2_descriptor(edev, ecomp);
+	if (desc)
+		ecomp->fault = (desc[3] & 0x60) >> 4;
+}
+
+static int ses_set_fault(struct enclosure_device *edev,
+			  struct enclosure_component *ecomp,
+			 enum enclosure_component_setting val)
+{
+	unsigned char desc[4];
+	unsigned char *desc_ptr;
+
+	if (!ses_page2_supported(edev))
+		return -EINVAL;
+
+	desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+	if (!desc_ptr)
+		return -EIO;
+
+	init_device_slot_control(desc, ecomp, desc_ptr);
+
+	switch (val) {
+	case ENCLOSURE_SETTING_DISABLED:
+		desc[3] &= 0xdf;
+		break;
+	case ENCLOSURE_SETTING_ENABLED:
+		desc[3] |= 0x20;
+		break;
+	default:
+		/* SES doesn't do the SGPIO blink settings */
+		return -EINVAL;
+	}
+
+	return ses_set_page2_descriptor(edev, ecomp, desc);
+}
+
+static void ses_get_status(struct enclosure_device *edev,
+			   struct enclosure_component *ecomp)
+{
+	unsigned char *desc;
+
+	if (!ses_page2_supported(edev)) {
+		ecomp->status = 0;
+		return;
+	}
+	desc = ses_get_page2_descriptor(edev, ecomp);
+	if (desc)
+		ecomp->status = (desc[0] & 0x0f);
+}
+
+static void ses_get_locate(struct enclosure_device *edev,
+			   struct enclosure_component *ecomp)
+{
+	unsigned char *desc;
+
+	if (!ses_page2_supported(edev)) {
+		ecomp->locate = 0;
+		return;
+	}
+	desc = ses_get_page2_descriptor(edev, ecomp);
+	if (desc)
+		ecomp->locate = (desc[2] & 0x02) ? 1 : 0;
+}
+
+static int ses_set_locate(struct enclosure_device *edev,
+			  struct enclosure_component *ecomp,
+			  enum enclosure_component_setting val)
+{
+	unsigned char desc[4];
+	unsigned char *desc_ptr;
+
+	if (!ses_page2_supported(edev))
+		return -EINVAL;
+
+	desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+	if (!desc_ptr)
+		return -EIO;
+
+	init_device_slot_control(desc, ecomp, desc_ptr);
+
+	switch (val) {
+	case ENCLOSURE_SETTING_DISABLED:
+		desc[2] &= 0xfd;
+		break;
+	case ENCLOSURE_SETTING_ENABLED:
+		desc[2] |= 0x02;
+		break;
+	default:
+		/* SES doesn't do the SGPIO blink settings */
+		return -EINVAL;
+	}
+	return ses_set_page2_descriptor(edev, ecomp, desc);
+}
+
+static int ses_set_active(struct enclosure_device *edev,
+			  struct enclosure_component *ecomp,
+			  enum enclosure_component_setting val)
+{
+	unsigned char desc[4];
+	unsigned char *desc_ptr;
+
+	if (!ses_page2_supported(edev))
+		return -EINVAL;
+
+	desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+	if (!desc_ptr)
+		return -EIO;
+
+	init_device_slot_control(desc, ecomp, desc_ptr);
+
+	switch (val) {
+	case ENCLOSURE_SETTING_DISABLED:
+		desc[2] &= 0x7f;
+		ecomp->active = 0;
+		break;
+	case ENCLOSURE_SETTING_ENABLED:
+		desc[2] |= 0x80;
+		ecomp->active = 1;
+		break;
+	default:
+		/* SES doesn't do the SGPIO blink settings */
+		return -EINVAL;
+	}
+	return ses_set_page2_descriptor(edev, ecomp, desc);
+}
+
+static int ses_show_id(struct enclosure_device *edev, char *buf)
+{
+	struct ses_device *ses_dev = edev->scratch;
+	unsigned long long id = get_unaligned_be64(ses_dev->page1+8+4);
+
+	return sprintf(buf, "%#llx\n", id);
+}
+
+static void ses_get_power_status(struct enclosure_device *edev,
+				 struct enclosure_component *ecomp)
+{
+	unsigned char *desc;
+
+	if (!ses_page2_supported(edev)) {
+		ecomp->power_status = 0;
+		return;
+	}
+
+	desc = ses_get_page2_descriptor(edev, ecomp);
+	if (desc)
+		ecomp->power_status = (desc[3] & 0x10) ? 0 : 1;
+}
+
+static int ses_set_power_status(struct enclosure_device *edev,
+				struct enclosure_component *ecomp,
+				int val)
+{
+	unsigned char desc[4];
+	unsigned char *desc_ptr;
+
+	if (!ses_page2_supported(edev))
+		return -EINVAL;
+
+	desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+	if (!desc_ptr)
+		return -EIO;
+
+	init_device_slot_control(desc, ecomp, desc_ptr);
+
+	switch (val) {
+	/* power = 1 is device_off = 0 and vice versa */
+	case 0:
+		desc[3] |= 0x10;
+		break;
+	case 1:
+		desc[3] &= 0xef;
+		break;
+	default:
+		return -EINVAL;
+	}
+	ecomp->power_status = val;
+	return ses_set_page2_descriptor(edev, ecomp, desc);
+}
+
+static struct enclosure_component_callbacks ses_enclosure_callbacks = {
+	.get_fault		= ses_get_fault,
+	.set_fault		= ses_set_fault,
+	.get_status		= ses_get_status,
+	.get_locate		= ses_get_locate,
+	.set_locate		= ses_set_locate,
+	.get_power_status	= ses_get_power_status,
+	.set_power_status	= ses_set_power_status,
+	.set_active		= ses_set_active,
+	.show_id		= ses_show_id,
+};
+
+struct ses_host_edev {
+	struct Scsi_Host *shost;
+	struct enclosure_device *edev;
+};
+
+#if 0
+int ses_match_host(struct enclosure_device *edev, void *data)
+{
+	struct ses_host_edev *sed = data;
+	struct scsi_device *sdev;
+
+	if (!scsi_is_sdev_device(edev->edev.parent))
+		return 0;
+
+	sdev = to_scsi_device(edev->edev.parent);
+
+	if (sdev->host != sed->shost)
+		return 0;
+
+	sed->edev = edev;
+	return 1;
+}
+#endif  /*  0  */
+
+static int ses_process_descriptor(struct enclosure_component *ecomp,
+				   unsigned char *desc, int max_desc_len)
+{
+	int eip = desc[0] & 0x10;
+	int invalid = desc[0] & 0x80;
+	enum scsi_protocol proto = desc[0] & 0x0f;
+	u64 addr = 0;
+	int slot = -1;
+	struct ses_component *scomp = ecomp->scratch;
+	unsigned char *d;
+
+	if (invalid)
+		return 0;
+
+	switch (proto) {
+	case SCSI_PROTOCOL_FCP:
+		if (eip) {
+			if (max_desc_len <= 7)
+				return 1;
+			d = desc + 4;
+			slot = d[3];
+		}
+		break;
+	case SCSI_PROTOCOL_SAS:
+
+		if (eip) {
+			if (max_desc_len <= 27)
+				return 1;
+			d = desc + 4;
+			slot = d[3];
+			d = desc + 8;
+		} else {
+			if (max_desc_len <= 23)
+				return 1;
+			d = desc + 4;
+		}
+
+
+		/* only take the phy0 addr */
+		addr = (u64)d[12] << 56 |
+			(u64)d[13] << 48 |
+			(u64)d[14] << 40 |
+			(u64)d[15] << 32 |
+			(u64)d[16] << 24 |
+			(u64)d[17] << 16 |
+			(u64)d[18] << 8 |
+			(u64)d[19];
+		break;
+	default:
+		/* FIXME: Need to add more protocols than just SAS */
+		break;
+	}
+	ecomp->slot = slot;
+	scomp->addr = addr;
+
+	return 0;
+}
+
+struct efd {
+	u64 addr;
+	struct device *dev;
+};
+
+static int ses_enclosure_find_by_addr(struct enclosure_device *edev,
+				      void *data)
+{
+	struct efd *efd = data;
+	int i;
+	struct ses_component *scomp;
+
+	for (i = 0; i < edev->components; i++) {
+		scomp = edev->component[i].scratch;
+		if (scomp->addr != efd->addr)
+			continue;
+
+		if (enclosure_add_device(edev, i, efd->dev) == 0)
+			kobject_uevent(&efd->dev->kobj, KOBJ_CHANGE);
+		return 1;
+	}
+	return 0;
+}
+
+#define INIT_ALLOC_SIZE 32
+
+static void ses_enclosure_data_process(struct enclosure_device *edev,
+				       struct scsi_device *sdev,
+				       int create)
+{
+	u32 result;
+	unsigned char *buf = NULL, *type_ptr, *desc_ptr, *addl_desc_ptr = NULL;
+	int i, j, page7_len, len, components;
+	struct ses_device *ses_dev = edev->scratch;
+	int types = ses_dev->page1_num_types;
+	unsigned char *hdr_buf = kzalloc(INIT_ALLOC_SIZE, GFP_KERNEL);
+
+	if (!hdr_buf)
+		goto simple_populate;
+
+	/* re-read page 10 */
+	if (ses_dev->page10)
+		ses_recv_diag(sdev, 10, ses_dev->page10, ses_dev->page10_len);
+	/* Page 7 for the descriptors is optional */
+	result = ses_recv_diag(sdev, 7, hdr_buf, INIT_ALLOC_SIZE);
+	if (result)
+		goto simple_populate;
+
+	page7_len = len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
+	/* add 1 for trailing '\0' we'll use */
+	buf = kzalloc(len + 1, GFP_KERNEL);
+	if (!buf)
+		goto simple_populate;
+	result = ses_recv_diag(sdev, 7, buf, len);
+	if (result) {
+ simple_populate:
+		kfree(buf);
+		buf = NULL;
+		desc_ptr = NULL;
+		len = 0;
+		page7_len = 0;
+	} else {
+		desc_ptr = buf + 8;
+		len = (desc_ptr[2] << 8) + desc_ptr[3];
+		/* skip past overall descriptor */
+		desc_ptr += len + 4;
+	}
+	if (ses_dev->page10 && ses_dev->page10_len > 9)
+		addl_desc_ptr = ses_dev->page10 + 8;
+	type_ptr = ses_dev->page1_types;
+	components = 0;
+	for (i = 0; i < types; i++, type_ptr += 4) {
+		for (j = 0; j < type_ptr[1]; j++) {
+			char *name = NULL;
+			struct enclosure_component *ecomp;
+			int max_desc_len;
+
+			if (desc_ptr) {
+				if (desc_ptr + 3 >= buf + page7_len) {
+					desc_ptr = NULL;
+				} else {
+					len = (desc_ptr[2] << 8) + desc_ptr[3];
+					desc_ptr += 4;
+					if (desc_ptr + len > buf + page7_len)
+						desc_ptr = NULL;
+					else {
+						/* Add trailing zero - pushes into
+						 * reserved space */
+						desc_ptr[len] = '\0';
+						name = desc_ptr;
+					}
+				}
+			}
+			if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE ||
+			    type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) {
+
+				if (create)
+					ecomp =	enclosure_component_alloc(
+						edev,
+						components++,
+						type_ptr[0],
+						name);
+				else if (components < edev->components)
+					ecomp = &edev->component[components++];
+				else
+					ecomp = ERR_PTR(-EINVAL);
+
+				if (!IS_ERR(ecomp)) {
+					if (addl_desc_ptr) {
+						max_desc_len = ses_dev->page10_len -
+						    (addl_desc_ptr - ses_dev->page10);
+						if (ses_process_descriptor(ecomp,
+						    addl_desc_ptr,
+						    max_desc_len))
+							addl_desc_ptr = NULL;
+					}
+					if (create)
+						enclosure_component_register(
+							ecomp);
+				}
+			}
+			if (desc_ptr)
+				desc_ptr += len;
+
+			if (addl_desc_ptr &&
+			    /* only find additional descriptions for specific devices */
+			    (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_SAS_EXPANDER ||
+			     /* these elements are optional */
+			     type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_TARGET_PORT ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT ||
+			     type_ptr[0] == ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS)) {
+				addl_desc_ptr += addl_desc_ptr[1] + 2;
+				if (addl_desc_ptr + 1 >= ses_dev->page10 + ses_dev->page10_len)
+					addl_desc_ptr = NULL;
+			}
+		}
+	}
+	kfree(buf);
+	kfree(hdr_buf);
+}
+
+static void ses_match_to_enclosure(struct enclosure_device *edev,
+				   struct scsi_device *sdev,
+				   int refresh)
+{
+	struct scsi_device *edev_sdev = to_scsi_device(edev->edev.parent);
+	struct efd efd = {
+		.addr = 0,
+	};
+
+	if (refresh)
+		ses_enclosure_data_process(edev, edev_sdev, 0);
+
+	if (scsi_is_sas_rphy(sdev->sdev_target->dev.parent))
+		efd.addr = sas_get_address(sdev);
+
+	if (efd.addr) {
+		efd.dev = &sdev->sdev_gendev;
+
+		enclosure_for_each_device(ses_enclosure_find_by_addr, &efd);
+	}
+}
+
+static int ses_intf_add(struct device *cdev,
+			struct class_interface *intf)
+{
+	struct scsi_device *sdev = to_scsi_device(cdev->parent);
+	struct scsi_device *tmp_sdev;
+	unsigned char *buf = NULL, *hdr_buf, *type_ptr, page;
+	struct ses_device *ses_dev;
+	u32 result;
+	int i, types, len, components = 0;
+	int err = -ENOMEM;
+	int num_enclosures;
+	struct enclosure_device *edev;
+	struct ses_component *scomp = NULL;
+
+	if (!scsi_device_enclosure(sdev)) {
+		/* not an enclosure, but might be in one */
+		struct enclosure_device *prev = NULL;
+
+		while ((edev = enclosure_find(&sdev->host->shost_gendev, prev)) != NULL) {
+			ses_match_to_enclosure(edev, sdev, 1);
+			prev = edev;
+		}
+		return -ENODEV;
+	}
+
+	/* TYPE_ENCLOSURE prints a message in probe */
+	if (sdev->type != TYPE_ENCLOSURE)
+		sdev_printk(KERN_NOTICE, sdev, "Embedded Enclosure Device\n");
+
+	ses_dev = kzalloc(sizeof(*ses_dev), GFP_KERNEL);
+	hdr_buf = kzalloc(INIT_ALLOC_SIZE, GFP_KERNEL);
+	if (!hdr_buf || !ses_dev)
+		goto err_init_free;
+
+	page = 1;
+	result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE);
+	if (result)
+		goto recv_failed;
+
+	len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
+	buf = kzalloc(len, GFP_KERNEL);
+	if (!buf)
+		goto err_free;
+
+	result = ses_recv_diag(sdev, page, buf, len);
+	if (result)
+		goto recv_failed;
+
+	types = 0;
+
+	/* we always have one main enclosure and the rest are referred
+	 * to as secondary subenclosures */
+	num_enclosures = buf[1] + 1;
+
+	/* begin at the enclosure descriptor */
+	type_ptr = buf + 8;
+	/* skip all the enclosure descriptors */
+	for (i = 0; i < num_enclosures && type_ptr < buf + len; i++) {
+		types += type_ptr[2];
+		type_ptr += type_ptr[3] + 4;
+	}
+
+	ses_dev->page1_types = type_ptr;
+	ses_dev->page1_num_types = types;
+
+	for (i = 0; i < types && type_ptr < buf + len; i++, type_ptr += 4) {
+		if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE ||
+		    type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE)
+			components += type_ptr[1];
+	}
+
+	ses_dev->page1 = buf;
+	ses_dev->page1_len = len;
+	buf = NULL;
+
+	page = 2;
+	result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE);
+	if (result)
+		goto page2_not_supported;
+
+	len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
+	buf = kzalloc(len, GFP_KERNEL);
+	if (!buf)
+		goto err_free;
+
+	/* make sure getting page 2 actually works */
+	result = ses_recv_diag(sdev, 2, buf, len);
+	if (result)
+		goto recv_failed;
+	ses_dev->page2 = buf;
+	ses_dev->page2_len = len;
+	buf = NULL;
+
+	/* The additional information page --- allows us
+	 * to match up the devices */
+	page = 10;
+	result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE);
+	if (!result) {
+
+		len = (hdr_buf[2] << 8) + hdr_buf[3] + 4;
+		buf = kzalloc(len, GFP_KERNEL);
+		if (!buf)
+			goto err_free;
+
+		result = ses_recv_diag(sdev, page, buf, len);
+		if (result)
+			goto recv_failed;
+		ses_dev->page10 = buf;
+		ses_dev->page10_len = len;
+		buf = NULL;
+	}
+page2_not_supported:
+	if (components > 0) {
+		scomp = kcalloc(components, sizeof(struct ses_component), GFP_KERNEL);
+		if (!scomp)
+			goto err_free;
+	}
+
+	edev = enclosure_register(cdev->parent, dev_name(&sdev->sdev_gendev),
+				  components, &ses_enclosure_callbacks);
+	if (IS_ERR(edev)) {
+		err = PTR_ERR(edev);
+		goto err_free;
+	}
+
+	kfree(hdr_buf);
+
+	edev->scratch = ses_dev;
+	for (i = 0; i < components; i++)
+		edev->component[i].scratch = scomp + i;
+
+	ses_enclosure_data_process(edev, sdev, 1);
+
+	/* see if there are any devices matching before
+	 * we found the enclosure */
+	shost_for_each_device(tmp_sdev, sdev->host) {
+		if (tmp_sdev->lun != 0 || scsi_device_enclosure(tmp_sdev))
+			continue;
+		ses_match_to_enclosure(edev, tmp_sdev, 0);
+	}
+
+	return 0;
+
+ recv_failed:
+	sdev_printk(KERN_ERR, sdev, "Failed to get diagnostic page 0x%x\n",
+		    page);
+	err = -ENODEV;
+ err_free:
+	kfree(buf);
+	kfree(scomp);
+	kfree(ses_dev->page10);
+	kfree(ses_dev->page2);
+	kfree(ses_dev->page1);
+ err_init_free:
+	kfree(ses_dev);
+	kfree(hdr_buf);
+	sdev_printk(KERN_ERR, sdev, "Failed to bind enclosure %d\n", err);
+	return err;
+}
+
+static int ses_remove(struct device *dev)
+{
+	return 0;
+}
+
+static void ses_intf_remove_component(struct scsi_device *sdev)
+{
+	struct enclosure_device *edev, *prev = NULL;
+
+	while ((edev = enclosure_find(&sdev->host->shost_gendev, prev)) != NULL) {
+		prev = edev;
+		if (!enclosure_remove_device(edev, &sdev->sdev_gendev))
+			break;
+	}
+	if (edev)
+		put_device(&edev->edev);
+}
+
+static void ses_intf_remove_enclosure(struct scsi_device *sdev)
+{
+	struct enclosure_device *edev;
+	struct ses_device *ses_dev;
+
+	/*  exact match to this enclosure */
+	edev = enclosure_find(&sdev->sdev_gendev, NULL);
+	if (!edev)
+		return;
+
+	ses_dev = edev->scratch;
+	edev->scratch = NULL;
+
+	kfree(ses_dev->page10);
+	kfree(ses_dev->page1);
+	kfree(ses_dev->page2);
+	kfree(ses_dev);
+
+	if (edev->components)
+		kfree(edev->component[0].scratch);
+
+	put_device(&edev->edev);
+	enclosure_unregister(edev);
+}
+
+static void ses_intf_remove(struct device *cdev,
+			    struct class_interface *intf)
+{
+	struct scsi_device *sdev = to_scsi_device(cdev->parent);
+
+	if (!scsi_device_enclosure(sdev))
+		ses_intf_remove_component(sdev);
+	else
+		ses_intf_remove_enclosure(sdev);
+}
+
+static struct class_interface ses_interface = {
+	.add_dev	= ses_intf_add,
+	.remove_dev	= ses_intf_remove,
+};
+
+static struct scsi_driver ses_template = {
+	.gendrv = {
+		.name		= "ses",
+		.owner		= THIS_MODULE,
+		.probe		= ses_probe,
+		.remove		= ses_remove,
+	},
+};
+
+static int __init ses_init(void)
+{
+	int err;
+
+	err = scsi_register_interface(&ses_interface);
+	if (err)
+		return err;
+
+	err = scsi_register_driver(&ses_template.gendrv);
+	if (err)
+		goto out_unreg;
+
+	return 0;
+
+ out_unreg:
+	scsi_unregister_interface(&ses_interface);
+	return err;
+}
+
+static void __exit ses_exit(void)
+{
+	scsi_unregister_driver(&ses_template.gendrv);
+	scsi_unregister_interface(&ses_interface);
+}
+
+module_init(ses_init);
+module_exit(ses_exit);
+
+MODULE_ALIAS_SCSI_DEVICE(TYPE_ENCLOSURE);
+
+MODULE_AUTHOR("James Bottomley");
+MODULE_DESCRIPTION("SCSI Enclosure Services (ses) driver");
+MODULE_LICENSE("GPL v2");