summaryrefslogtreecommitdiffstats
path: root/drivers/soc/aspeed
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/soc/aspeed
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/soc/aspeed')
-rw-r--r--drivers/soc/aspeed/Kconfig57
-rw-r--r--drivers/soc/aspeed/Makefile6
-rw-r--r--drivers/soc/aspeed/aspeed-lpc-ctrl.c366
-rw-r--r--drivers/soc/aspeed/aspeed-lpc-snoop.c380
-rw-r--r--drivers/soc/aspeed/aspeed-p2a-ctrl.c444
-rw-r--r--drivers/soc/aspeed/aspeed-socinfo.c154
-rw-r--r--drivers/soc/aspeed/aspeed-uart-routing.c603
7 files changed, 2010 insertions, 0 deletions
diff --git a/drivers/soc/aspeed/Kconfig b/drivers/soc/aspeed/Kconfig
new file mode 100644
index 000000000..f579ee0b5
--- /dev/null
+++ b/drivers/soc/aspeed/Kconfig
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+if ARCH_ASPEED || COMPILE_TEST
+
+menu "ASPEED SoC drivers"
+
+config ASPEED_LPC_CTRL
+ tristate "ASPEED LPC firmware cycle control"
+ select REGMAP
+ select MFD_SYSCON
+ default ARCH_ASPEED
+ help
+ Control LPC firmware cycle mappings through ioctl()s. The driver
+ also provides a read/write interface to a BMC ram region where the
+ host LPC read/write region can be buffered.
+
+config ASPEED_LPC_SNOOP
+ tristate "ASPEED LPC snoop support"
+ select REGMAP
+ select MFD_SYSCON
+ default ARCH_ASPEED
+ help
+ Provides a driver to control the LPC snoop interface which
+ allows the BMC to listen on and save the data written by
+ the host to an arbitrary LPC I/O port.
+
+config ASPEED_UART_ROUTING
+ tristate "ASPEED uart routing control"
+ select REGMAP
+ select MFD_SYSCON
+ default ARCH_ASPEED
+ help
+ Provides a driver to control the UART routing paths, allowing
+ users to perform runtime configuration of the RX muxes among
+ the UART controllers and I/O pins.
+
+config ASPEED_P2A_CTRL
+ tristate "ASPEED P2A (VGA MMIO to BMC) bridge control"
+ select REGMAP
+ select MFD_SYSCON
+ default ARCH_ASPEED
+ help
+ Control ASPEED P2A VGA MMIO to BMC mappings through ioctl()s. The
+ driver also provides an interface for userspace mappings to a
+ pre-defined region.
+
+config ASPEED_SOCINFO
+ bool "ASPEED SoC Information driver"
+ default ARCH_ASPEED
+ select SOC_BUS
+ default ARCH_ASPEED
+ help
+ Say yes to support decoding of ASPEED BMC information.
+
+endmenu
+
+endif
diff --git a/drivers/soc/aspeed/Makefile b/drivers/soc/aspeed/Makefile
new file mode 100644
index 000000000..b35d74592
--- /dev/null
+++ b/drivers/soc/aspeed/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
+obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
+obj-$(CONFIG_ASPEED_UART_ROUTING) += aspeed-uart-routing.o
+obj-$(CONFIG_ASPEED_P2A_CTRL) += aspeed-p2a-ctrl.o
+obj-$(CONFIG_ASPEED_SOCINFO) += aspeed-socinfo.o
diff --git a/drivers/soc/aspeed/aspeed-lpc-ctrl.c b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
new file mode 100644
index 000000000..258894ed2
--- /dev/null
+++ b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2017 IBM Corporation
+ */
+
+#include <linux/clk.h>
+#include <linux/log2.h>
+#include <linux/mfd/syscon.h>
+#include <linux/miscdevice.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/regmap.h>
+
+#include <linux/aspeed-lpc-ctrl.h>
+
+#define DEVICE_NAME "aspeed-lpc-ctrl"
+
+#define HICR5 0x80
+#define HICR5_ENL2H BIT(8)
+#define HICR5_ENFWH BIT(10)
+
+#define HICR6 0x84
+#define SW_FWH2AHB BIT(17)
+
+#define HICR7 0x88
+#define HICR8 0x8c
+
+struct aspeed_lpc_ctrl {
+ struct miscdevice miscdev;
+ struct regmap *regmap;
+ struct clk *clk;
+ phys_addr_t mem_base;
+ resource_size_t mem_size;
+ u32 pnor_size;
+ u32 pnor_base;
+ bool fwh2ahb;
+ struct regmap *scu;
+};
+
+static struct aspeed_lpc_ctrl *file_aspeed_lpc_ctrl(struct file *file)
+{
+ return container_of(file->private_data, struct aspeed_lpc_ctrl,
+ miscdev);
+}
+
+static int aspeed_lpc_ctrl_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
+ unsigned long vsize = vma->vm_end - vma->vm_start;
+ pgprot_t prot = vma->vm_page_prot;
+
+ if (vma->vm_pgoff + vma_pages(vma) > lpc_ctrl->mem_size >> PAGE_SHIFT)
+ return -EINVAL;
+
+ /* ast2400/2500 AHB accesses are not cache coherent */
+ prot = pgprot_noncached(prot);
+
+ if (remap_pfn_range(vma, vma->vm_start,
+ (lpc_ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff,
+ vsize, prot))
+ return -EAGAIN;
+
+ return 0;
+}
+
+static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd,
+ unsigned long param)
+{
+ struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
+ struct device *dev = file->private_data;
+ void __user *p = (void __user *)param;
+ struct aspeed_lpc_ctrl_mapping map;
+ u32 addr;
+ u32 size;
+ long rc;
+
+ if (copy_from_user(&map, p, sizeof(map)))
+ return -EFAULT;
+
+ if (map.flags != 0)
+ return -EINVAL;
+
+ switch (cmd) {
+ case ASPEED_LPC_CTRL_IOCTL_GET_SIZE:
+ /* The flash windows don't report their size */
+ if (map.window_type != ASPEED_LPC_CTRL_WINDOW_MEMORY)
+ return -EINVAL;
+
+ /* Support more than one window id in the future */
+ if (map.window_id != 0)
+ return -EINVAL;
+
+ /* If memory-region is not described in device tree */
+ if (!lpc_ctrl->mem_size) {
+ dev_dbg(dev, "Didn't find reserved memory\n");
+ return -ENXIO;
+ }
+
+ map.size = lpc_ctrl->mem_size;
+
+ return copy_to_user(p, &map, sizeof(map)) ? -EFAULT : 0;
+ case ASPEED_LPC_CTRL_IOCTL_MAP:
+
+ /*
+ * The top half of HICR7 is the MSB of the BMC address of the
+ * mapping.
+ * The bottom half of HICR7 is the MSB of the HOST LPC
+ * firmware space address of the mapping.
+ *
+ * The 1 bits in the top of half of HICR8 represent the bits
+ * (in the requested address) that should be ignored and
+ * replaced with those from the top half of HICR7.
+ * The 1 bits in the bottom half of HICR8 represent the bits
+ * (in the requested address) that should be kept and pass
+ * into the BMC address space.
+ */
+
+ /*
+ * It doesn't make sense to talk about a size or offset with
+ * low 16 bits set. Both HICR7 and HICR8 talk about the top 16
+ * bits of addresses and sizes.
+ */
+
+ if ((map.size & 0x0000ffff) || (map.offset & 0x0000ffff))
+ return -EINVAL;
+
+ /*
+ * Because of the way the masks work in HICR8 offset has to
+ * be a multiple of size.
+ */
+ if (map.offset & (map.size - 1))
+ return -EINVAL;
+
+ if (map.window_type == ASPEED_LPC_CTRL_WINDOW_FLASH) {
+ if (!lpc_ctrl->pnor_size) {
+ dev_dbg(dev, "Didn't find host pnor flash\n");
+ return -ENXIO;
+ }
+ addr = lpc_ctrl->pnor_base;
+ size = lpc_ctrl->pnor_size;
+ } else if (map.window_type == ASPEED_LPC_CTRL_WINDOW_MEMORY) {
+ /* If memory-region is not described in device tree */
+ if (!lpc_ctrl->mem_size) {
+ dev_dbg(dev, "Didn't find reserved memory\n");
+ return -ENXIO;
+ }
+ addr = lpc_ctrl->mem_base;
+ size = lpc_ctrl->mem_size;
+ } else {
+ return -EINVAL;
+ }
+
+ /* Check overflow first! */
+ if (map.offset + map.size < map.offset ||
+ map.offset + map.size > size)
+ return -EINVAL;
+
+ if (map.size == 0 || map.size > size)
+ return -EINVAL;
+
+ addr += map.offset;
+
+ /*
+ * addr (host lpc address) is safe regardless of values. This
+ * simply changes the address the host has to request on its
+ * side of the LPC bus. This cannot impact the hosts own
+ * memory space by surprise as LPC specific accessors are
+ * required. The only strange thing that could be done is
+ * setting the lower 16 bits but the shift takes care of that.
+ */
+
+ rc = regmap_write(lpc_ctrl->regmap, HICR7,
+ (addr | (map.addr >> 16)));
+ if (rc)
+ return rc;
+
+ rc = regmap_write(lpc_ctrl->regmap, HICR8,
+ (~(map.size - 1)) | ((map.size >> 16) - 1));
+ if (rc)
+ return rc;
+
+ /*
+ * Switch to FWH2AHB mode, AST2600 only.
+ */
+ if (lpc_ctrl->fwh2ahb) {
+ /*
+ * Enable FWH2AHB in SCU debug control register 2. This
+ * does not turn it on, but makes it available for it
+ * to be configured in HICR6.
+ */
+ regmap_update_bits(lpc_ctrl->scu, 0x0D8, BIT(2), 0);
+
+ /*
+ * The other bits in this register are interrupt status bits
+ * that are cleared by writing 1. As we don't want to clear
+ * them, set only the bit of interest.
+ */
+ regmap_write(lpc_ctrl->regmap, HICR6, SW_FWH2AHB);
+ }
+
+ /*
+ * Enable LPC FHW cycles. This is required for the host to
+ * access the regions specified.
+ */
+ return regmap_update_bits(lpc_ctrl->regmap, HICR5,
+ HICR5_ENFWH | HICR5_ENL2H,
+ HICR5_ENFWH | HICR5_ENL2H);
+ }
+
+ return -EINVAL;
+}
+
+static const struct file_operations aspeed_lpc_ctrl_fops = {
+ .owner = THIS_MODULE,
+ .mmap = aspeed_lpc_ctrl_mmap,
+ .unlocked_ioctl = aspeed_lpc_ctrl_ioctl,
+};
+
+static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
+{
+ struct aspeed_lpc_ctrl *lpc_ctrl;
+ struct device_node *node;
+ struct resource resm;
+ struct device *dev;
+ struct device_node *np;
+ int rc;
+
+ dev = &pdev->dev;
+
+ lpc_ctrl = devm_kzalloc(dev, sizeof(*lpc_ctrl), GFP_KERNEL);
+ if (!lpc_ctrl)
+ return -ENOMEM;
+
+ /* If flash is described in device tree then store */
+ node = of_parse_phandle(dev->of_node, "flash", 0);
+ if (!node) {
+ dev_dbg(dev, "Didn't find host pnor flash node\n");
+ } else {
+ rc = of_address_to_resource(node, 1, &resm);
+ of_node_put(node);
+ if (rc) {
+ dev_err(dev, "Couldn't address to resource for flash\n");
+ return rc;
+ }
+
+ lpc_ctrl->pnor_size = resource_size(&resm);
+ lpc_ctrl->pnor_base = resm.start;
+ }
+
+
+ dev_set_drvdata(&pdev->dev, lpc_ctrl);
+
+ /* If memory-region is described in device tree then store */
+ node = of_parse_phandle(dev->of_node, "memory-region", 0);
+ if (!node) {
+ dev_dbg(dev, "Didn't find reserved memory\n");
+ } else {
+ rc = of_address_to_resource(node, 0, &resm);
+ of_node_put(node);
+ if (rc) {
+ dev_err(dev, "Couldn't address to resource for reserved memory\n");
+ return -ENXIO;
+ }
+
+ lpc_ctrl->mem_size = resource_size(&resm);
+ lpc_ctrl->mem_base = resm.start;
+
+ if (!is_power_of_2(lpc_ctrl->mem_size)) {
+ dev_err(dev, "Reserved memory size must be a power of 2, got %u\n",
+ (unsigned int)lpc_ctrl->mem_size);
+ return -EINVAL;
+ }
+
+ if (!IS_ALIGNED(lpc_ctrl->mem_base, lpc_ctrl->mem_size)) {
+ dev_err(dev, "Reserved memory must be naturally aligned for size %u\n",
+ (unsigned int)lpc_ctrl->mem_size);
+ return -EINVAL;
+ }
+ }
+
+ np = pdev->dev.parent->of_node;
+ if (!of_device_is_compatible(np, "aspeed,ast2400-lpc-v2") &&
+ !of_device_is_compatible(np, "aspeed,ast2500-lpc-v2") &&
+ !of_device_is_compatible(np, "aspeed,ast2600-lpc-v2")) {
+ dev_err(dev, "unsupported LPC device binding\n");
+ return -ENODEV;
+ }
+
+ lpc_ctrl->regmap = syscon_node_to_regmap(np);
+ if (IS_ERR(lpc_ctrl->regmap)) {
+ dev_err(dev, "Couldn't get regmap\n");
+ return -ENODEV;
+ }
+
+ if (of_device_is_compatible(dev->of_node, "aspeed,ast2600-lpc-ctrl")) {
+ lpc_ctrl->fwh2ahb = true;
+
+ lpc_ctrl->scu = syscon_regmap_lookup_by_compatible("aspeed,ast2600-scu");
+ if (IS_ERR(lpc_ctrl->scu)) {
+ dev_err(dev, "couldn't find scu\n");
+ return PTR_ERR(lpc_ctrl->scu);
+ }
+ }
+
+ lpc_ctrl->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(lpc_ctrl->clk))
+ return dev_err_probe(dev, PTR_ERR(lpc_ctrl->clk),
+ "couldn't get clock\n");
+ rc = clk_prepare_enable(lpc_ctrl->clk);
+ if (rc) {
+ dev_err(dev, "couldn't enable clock\n");
+ return rc;
+ }
+
+ lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
+ lpc_ctrl->miscdev.name = DEVICE_NAME;
+ lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops;
+ lpc_ctrl->miscdev.parent = dev;
+ rc = misc_register(&lpc_ctrl->miscdev);
+ if (rc) {
+ dev_err(dev, "Unable to register device\n");
+ goto err;
+ }
+
+ return 0;
+
+err:
+ clk_disable_unprepare(lpc_ctrl->clk);
+ return rc;
+}
+
+static int aspeed_lpc_ctrl_remove(struct platform_device *pdev)
+{
+ struct aspeed_lpc_ctrl *lpc_ctrl = dev_get_drvdata(&pdev->dev);
+
+ misc_deregister(&lpc_ctrl->miscdev);
+ clk_disable_unprepare(lpc_ctrl->clk);
+
+ return 0;
+}
+
+static const struct of_device_id aspeed_lpc_ctrl_match[] = {
+ { .compatible = "aspeed,ast2400-lpc-ctrl" },
+ { .compatible = "aspeed,ast2500-lpc-ctrl" },
+ { .compatible = "aspeed,ast2600-lpc-ctrl" },
+ { },
+};
+
+static struct platform_driver aspeed_lpc_ctrl_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ .of_match_table = aspeed_lpc_ctrl_match,
+ },
+ .probe = aspeed_lpc_ctrl_probe,
+ .remove = aspeed_lpc_ctrl_remove,
+};
+
+module_platform_driver(aspeed_lpc_ctrl_driver);
+
+MODULE_DEVICE_TABLE(of, aspeed_lpc_ctrl_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cyril Bur <cyrilbur@gmail.com>");
+MODULE_DESCRIPTION("Control for ASPEED LPC HOST to BMC mappings");
diff --git a/drivers/soc/aspeed/aspeed-lpc-snoop.c b/drivers/soc/aspeed/aspeed-lpc-snoop.c
new file mode 100644
index 000000000..eceeaf8df
--- /dev/null
+++ b/drivers/soc/aspeed/aspeed-lpc-snoop.c
@@ -0,0 +1,380 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2017 Google Inc
+ *
+ * Provides a simple driver to control the ASPEED LPC snoop interface which
+ * allows the BMC to listen on and save the data written by
+ * the host to an arbitrary LPC I/O port.
+ *
+ * Typically used by the BMC to "watch" host boot progress via port
+ * 0x80 writes made by the BIOS during the boot process.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/kfifo.h>
+#include <linux/mfd/syscon.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/regmap.h>
+
+#define DEVICE_NAME "aspeed-lpc-snoop"
+
+#define NUM_SNOOP_CHANNELS 2
+#define SNOOP_FIFO_SIZE 2048
+
+#define HICR5 0x80
+#define HICR5_EN_SNP0W BIT(0)
+#define HICR5_ENINT_SNP0W BIT(1)
+#define HICR5_EN_SNP1W BIT(2)
+#define HICR5_ENINT_SNP1W BIT(3)
+#define HICR6 0x84
+#define HICR6_STR_SNP0W BIT(0)
+#define HICR6_STR_SNP1W BIT(1)
+#define SNPWADR 0x90
+#define SNPWADR_CH0_MASK GENMASK(15, 0)
+#define SNPWADR_CH0_SHIFT 0
+#define SNPWADR_CH1_MASK GENMASK(31, 16)
+#define SNPWADR_CH1_SHIFT 16
+#define SNPWDR 0x94
+#define SNPWDR_CH0_MASK GENMASK(7, 0)
+#define SNPWDR_CH0_SHIFT 0
+#define SNPWDR_CH1_MASK GENMASK(15, 8)
+#define SNPWDR_CH1_SHIFT 8
+#define HICRB 0x100
+#define HICRB_ENSNP0D BIT(14)
+#define HICRB_ENSNP1D BIT(15)
+
+struct aspeed_lpc_snoop_model_data {
+ /* The ast2400 has bits 14 and 15 as reserved, whereas the ast2500
+ * can use them.
+ */
+ unsigned int has_hicrb_ensnp;
+};
+
+struct aspeed_lpc_snoop_channel {
+ struct kfifo fifo;
+ wait_queue_head_t wq;
+ struct miscdevice miscdev;
+};
+
+struct aspeed_lpc_snoop {
+ struct regmap *regmap;
+ int irq;
+ struct clk *clk;
+ struct aspeed_lpc_snoop_channel chan[NUM_SNOOP_CHANNELS];
+};
+
+static struct aspeed_lpc_snoop_channel *snoop_file_to_chan(struct file *file)
+{
+ return container_of(file->private_data,
+ struct aspeed_lpc_snoop_channel,
+ miscdev);
+}
+
+static ssize_t snoop_file_read(struct file *file, char __user *buffer,
+ size_t count, loff_t *ppos)
+{
+ struct aspeed_lpc_snoop_channel *chan = snoop_file_to_chan(file);
+ unsigned int copied;
+ int ret = 0;
+
+ if (kfifo_is_empty(&chan->fifo)) {
+ if (file->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+ ret = wait_event_interruptible(chan->wq,
+ !kfifo_is_empty(&chan->fifo));
+ if (ret == -ERESTARTSYS)
+ return -EINTR;
+ }
+ ret = kfifo_to_user(&chan->fifo, buffer, count, &copied);
+ if (ret)
+ return ret;
+
+ return copied;
+}
+
+static __poll_t snoop_file_poll(struct file *file,
+ struct poll_table_struct *pt)
+{
+ struct aspeed_lpc_snoop_channel *chan = snoop_file_to_chan(file);
+
+ poll_wait(file, &chan->wq, pt);
+ return !kfifo_is_empty(&chan->fifo) ? EPOLLIN : 0;
+}
+
+static const struct file_operations snoop_fops = {
+ .owner = THIS_MODULE,
+ .read = snoop_file_read,
+ .poll = snoop_file_poll,
+ .llseek = noop_llseek,
+};
+
+/* Save a byte to a FIFO and discard the oldest byte if FIFO is full */
+static void put_fifo_with_discard(struct aspeed_lpc_snoop_channel *chan, u8 val)
+{
+ if (!kfifo_initialized(&chan->fifo))
+ return;
+ if (kfifo_is_full(&chan->fifo))
+ kfifo_skip(&chan->fifo);
+ kfifo_put(&chan->fifo, val);
+ wake_up_interruptible(&chan->wq);
+}
+
+static irqreturn_t aspeed_lpc_snoop_irq(int irq, void *arg)
+{
+ struct aspeed_lpc_snoop *lpc_snoop = arg;
+ u32 reg, data;
+
+ if (regmap_read(lpc_snoop->regmap, HICR6, &reg))
+ return IRQ_NONE;
+
+ /* Check if one of the snoop channels is interrupting */
+ reg &= (HICR6_STR_SNP0W | HICR6_STR_SNP1W);
+ if (!reg)
+ return IRQ_NONE;
+
+ /* Ack pending IRQs */
+ regmap_write(lpc_snoop->regmap, HICR6, reg);
+
+ /* Read and save most recent snoop'ed data byte to FIFO */
+ regmap_read(lpc_snoop->regmap, SNPWDR, &data);
+
+ if (reg & HICR6_STR_SNP0W) {
+ u8 val = (data & SNPWDR_CH0_MASK) >> SNPWDR_CH0_SHIFT;
+
+ put_fifo_with_discard(&lpc_snoop->chan[0], val);
+ }
+ if (reg & HICR6_STR_SNP1W) {
+ u8 val = (data & SNPWDR_CH1_MASK) >> SNPWDR_CH1_SHIFT;
+
+ put_fifo_with_discard(&lpc_snoop->chan[1], val);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int aspeed_lpc_snoop_config_irq(struct aspeed_lpc_snoop *lpc_snoop,
+ struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ int rc;
+
+ lpc_snoop->irq = platform_get_irq(pdev, 0);
+ if (!lpc_snoop->irq)
+ return -ENODEV;
+
+ rc = devm_request_irq(dev, lpc_snoop->irq,
+ aspeed_lpc_snoop_irq, IRQF_SHARED,
+ DEVICE_NAME, lpc_snoop);
+ if (rc < 0) {
+ dev_warn(dev, "Unable to request IRQ %d\n", lpc_snoop->irq);
+ lpc_snoop->irq = 0;
+ return rc;
+ }
+
+ return 0;
+}
+
+static int aspeed_lpc_enable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
+ struct device *dev,
+ int channel, u16 lpc_port)
+{
+ int rc = 0;
+ u32 hicr5_en, snpwadr_mask, snpwadr_shift, hicrb_en;
+ const struct aspeed_lpc_snoop_model_data *model_data =
+ of_device_get_match_data(dev);
+
+ init_waitqueue_head(&lpc_snoop->chan[channel].wq);
+ /* Create FIFO datastructure */
+ rc = kfifo_alloc(&lpc_snoop->chan[channel].fifo,
+ SNOOP_FIFO_SIZE, GFP_KERNEL);
+ if (rc)
+ return rc;
+
+ lpc_snoop->chan[channel].miscdev.minor = MISC_DYNAMIC_MINOR;
+ lpc_snoop->chan[channel].miscdev.name =
+ devm_kasprintf(dev, GFP_KERNEL, "%s%d", DEVICE_NAME, channel);
+ lpc_snoop->chan[channel].miscdev.fops = &snoop_fops;
+ lpc_snoop->chan[channel].miscdev.parent = dev;
+ rc = misc_register(&lpc_snoop->chan[channel].miscdev);
+ if (rc)
+ return rc;
+
+ /* Enable LPC snoop channel at requested port */
+ switch (channel) {
+ case 0:
+ hicr5_en = HICR5_EN_SNP0W | HICR5_ENINT_SNP0W;
+ snpwadr_mask = SNPWADR_CH0_MASK;
+ snpwadr_shift = SNPWADR_CH0_SHIFT;
+ hicrb_en = HICRB_ENSNP0D;
+ break;
+ case 1:
+ hicr5_en = HICR5_EN_SNP1W | HICR5_ENINT_SNP1W;
+ snpwadr_mask = SNPWADR_CH1_MASK;
+ snpwadr_shift = SNPWADR_CH1_SHIFT;
+ hicrb_en = HICRB_ENSNP1D;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(lpc_snoop->regmap, HICR5, hicr5_en, hicr5_en);
+ regmap_update_bits(lpc_snoop->regmap, SNPWADR, snpwadr_mask,
+ lpc_port << snpwadr_shift);
+ if (model_data->has_hicrb_ensnp)
+ regmap_update_bits(lpc_snoop->regmap, HICRB,
+ hicrb_en, hicrb_en);
+
+ return rc;
+}
+
+static void aspeed_lpc_disable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
+ int channel)
+{
+ switch (channel) {
+ case 0:
+ regmap_update_bits(lpc_snoop->regmap, HICR5,
+ HICR5_EN_SNP0W | HICR5_ENINT_SNP0W,
+ 0);
+ break;
+ case 1:
+ regmap_update_bits(lpc_snoop->regmap, HICR5,
+ HICR5_EN_SNP1W | HICR5_ENINT_SNP1W,
+ 0);
+ break;
+ default:
+ return;
+ }
+
+ kfifo_free(&lpc_snoop->chan[channel].fifo);
+ misc_deregister(&lpc_snoop->chan[channel].miscdev);
+}
+
+static int aspeed_lpc_snoop_probe(struct platform_device *pdev)
+{
+ struct aspeed_lpc_snoop *lpc_snoop;
+ struct device *dev;
+ struct device_node *np;
+ u32 port;
+ int rc;
+
+ dev = &pdev->dev;
+
+ lpc_snoop = devm_kzalloc(dev, sizeof(*lpc_snoop), GFP_KERNEL);
+ if (!lpc_snoop)
+ return -ENOMEM;
+
+ np = pdev->dev.parent->of_node;
+ if (!of_device_is_compatible(np, "aspeed,ast2400-lpc-v2") &&
+ !of_device_is_compatible(np, "aspeed,ast2500-lpc-v2") &&
+ !of_device_is_compatible(np, "aspeed,ast2600-lpc-v2")) {
+ dev_err(dev, "unsupported LPC device binding\n");
+ return -ENODEV;
+ }
+
+ lpc_snoop->regmap = syscon_node_to_regmap(np);
+ if (IS_ERR(lpc_snoop->regmap)) {
+ dev_err(dev, "Couldn't get regmap\n");
+ return -ENODEV;
+ }
+
+ dev_set_drvdata(&pdev->dev, lpc_snoop);
+
+ rc = of_property_read_u32_index(dev->of_node, "snoop-ports", 0, &port);
+ if (rc) {
+ dev_err(dev, "no snoop ports configured\n");
+ return -ENODEV;
+ }
+
+ lpc_snoop->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(lpc_snoop->clk)) {
+ rc = PTR_ERR(lpc_snoop->clk);
+ if (rc != -EPROBE_DEFER)
+ dev_err(dev, "couldn't get clock\n");
+ return rc;
+ }
+ rc = clk_prepare_enable(lpc_snoop->clk);
+ if (rc) {
+ dev_err(dev, "couldn't enable clock\n");
+ return rc;
+ }
+
+ rc = aspeed_lpc_snoop_config_irq(lpc_snoop, pdev);
+ if (rc)
+ goto err;
+
+ rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 0, port);
+ if (rc)
+ goto err;
+
+ /* Configuration of 2nd snoop channel port is optional */
+ if (of_property_read_u32_index(dev->of_node, "snoop-ports",
+ 1, &port) == 0) {
+ rc = aspeed_lpc_enable_snoop(lpc_snoop, dev, 1, port);
+ if (rc) {
+ aspeed_lpc_disable_snoop(lpc_snoop, 0);
+ goto err;
+ }
+ }
+
+ return 0;
+
+err:
+ clk_disable_unprepare(lpc_snoop->clk);
+
+ return rc;
+}
+
+static int aspeed_lpc_snoop_remove(struct platform_device *pdev)
+{
+ struct aspeed_lpc_snoop *lpc_snoop = dev_get_drvdata(&pdev->dev);
+
+ /* Disable both snoop channels */
+ aspeed_lpc_disable_snoop(lpc_snoop, 0);
+ aspeed_lpc_disable_snoop(lpc_snoop, 1);
+
+ clk_disable_unprepare(lpc_snoop->clk);
+
+ return 0;
+}
+
+static const struct aspeed_lpc_snoop_model_data ast2400_model_data = {
+ .has_hicrb_ensnp = 0,
+};
+
+static const struct aspeed_lpc_snoop_model_data ast2500_model_data = {
+ .has_hicrb_ensnp = 1,
+};
+
+static const struct of_device_id aspeed_lpc_snoop_match[] = {
+ { .compatible = "aspeed,ast2400-lpc-snoop",
+ .data = &ast2400_model_data },
+ { .compatible = "aspeed,ast2500-lpc-snoop",
+ .data = &ast2500_model_data },
+ { .compatible = "aspeed,ast2600-lpc-snoop",
+ .data = &ast2500_model_data },
+ { },
+};
+
+static struct platform_driver aspeed_lpc_snoop_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ .of_match_table = aspeed_lpc_snoop_match,
+ },
+ .probe = aspeed_lpc_snoop_probe,
+ .remove = aspeed_lpc_snoop_remove,
+};
+
+module_platform_driver(aspeed_lpc_snoop_driver);
+
+MODULE_DEVICE_TABLE(of, aspeed_lpc_snoop_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Robert Lippert <rlippert@google.com>");
+MODULE_DESCRIPTION("Linux driver to control Aspeed LPC snoop functionality");
diff --git a/drivers/soc/aspeed/aspeed-p2a-ctrl.c b/drivers/soc/aspeed/aspeed-p2a-ctrl.c
new file mode 100644
index 000000000..20b5fb2a2
--- /dev/null
+++ b/drivers/soc/aspeed/aspeed-p2a-ctrl.c
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Google Inc
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Provides a simple driver to control the ASPEED P2A interface which allows
+ * the host to read and write to various regions of the BMC's memory.
+ */
+
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/miscdevice.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include <linux/aspeed-p2a-ctrl.h>
+
+#define DEVICE_NAME "aspeed-p2a-ctrl"
+
+/* SCU2C is a Misc. Control Register. */
+#define SCU2C 0x2c
+/* SCU180 is the PCIe Configuration Setting Control Register. */
+#define SCU180 0x180
+/* Bit 1 controls the P2A bridge, while bit 0 controls the entire VGA device
+ * on the PCI bus.
+ */
+#define SCU180_ENP2A BIT(1)
+
+/* The ast2400/2500 both have six ranges. */
+#define P2A_REGION_COUNT 6
+
+struct region {
+ u64 min;
+ u64 max;
+ u32 bit;
+};
+
+struct aspeed_p2a_model_data {
+ /* min, max, bit */
+ struct region regions[P2A_REGION_COUNT];
+};
+
+struct aspeed_p2a_ctrl {
+ struct miscdevice miscdev;
+ struct regmap *regmap;
+
+ const struct aspeed_p2a_model_data *config;
+
+ /* Access to these needs to be locked, held via probe, mapping ioctl,
+ * and release, remove.
+ */
+ struct mutex tracking;
+ u32 readers;
+ u32 readerwriters[P2A_REGION_COUNT];
+
+ phys_addr_t mem_base;
+ resource_size_t mem_size;
+};
+
+struct aspeed_p2a_user {
+ struct file *file;
+ struct aspeed_p2a_ctrl *parent;
+
+ /* The entire memory space is opened for reading once the bridge is
+ * enabled, therefore this needs only to be tracked once per user.
+ * If any user has it open for read, the bridge must stay enabled.
+ */
+ u32 read;
+
+ /* Each entry of the array corresponds to a P2A Region. If the user
+ * opens for read or readwrite, the reference goes up here. On
+ * release, this array is walked and references adjusted accordingly.
+ */
+ u32 readwrite[P2A_REGION_COUNT];
+};
+
+static void aspeed_p2a_enable_bridge(struct aspeed_p2a_ctrl *p2a_ctrl)
+{
+ regmap_update_bits(p2a_ctrl->regmap,
+ SCU180, SCU180_ENP2A, SCU180_ENP2A);
+}
+
+static void aspeed_p2a_disable_bridge(struct aspeed_p2a_ctrl *p2a_ctrl)
+{
+ regmap_update_bits(p2a_ctrl->regmap, SCU180, SCU180_ENP2A, 0);
+}
+
+static int aspeed_p2a_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ unsigned long vsize;
+ pgprot_t prot;
+ struct aspeed_p2a_user *priv = file->private_data;
+ struct aspeed_p2a_ctrl *ctrl = priv->parent;
+
+ if (ctrl->mem_base == 0 && ctrl->mem_size == 0)
+ return -EINVAL;
+
+ vsize = vma->vm_end - vma->vm_start;
+ prot = vma->vm_page_prot;
+
+ if (vma->vm_pgoff + vma_pages(vma) > ctrl->mem_size >> PAGE_SHIFT)
+ return -EINVAL;
+
+ /* ast2400/2500 AHB accesses are not cache coherent */
+ prot = pgprot_noncached(prot);
+
+ if (remap_pfn_range(vma, vma->vm_start,
+ (ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff,
+ vsize, prot))
+ return -EAGAIN;
+
+ return 0;
+}
+
+static bool aspeed_p2a_region_acquire(struct aspeed_p2a_user *priv,
+ struct aspeed_p2a_ctrl *ctrl,
+ struct aspeed_p2a_ctrl_mapping *map)
+{
+ int i;
+ u64 base, end;
+ bool matched = false;
+
+ base = map->addr;
+ end = map->addr + (map->length - 1);
+
+ /* If the value is a legal u32, it will find a match. */
+ for (i = 0; i < P2A_REGION_COUNT; i++) {
+ const struct region *curr = &ctrl->config->regions[i];
+
+ /* If the top of this region is lower than your base, skip it.
+ */
+ if (curr->max < base)
+ continue;
+
+ /* If the bottom of this region is higher than your end, bail.
+ */
+ if (curr->min > end)
+ break;
+
+ /* Lock this and update it, therefore it someone else is
+ * closing their file out, this'll preserve the increment.
+ */
+ mutex_lock(&ctrl->tracking);
+ ctrl->readerwriters[i] += 1;
+ mutex_unlock(&ctrl->tracking);
+
+ /* Track with the user, so when they close their file, we can
+ * decrement properly.
+ */
+ priv->readwrite[i] += 1;
+
+ /* Enable the region as read-write. */
+ regmap_update_bits(ctrl->regmap, SCU2C, curr->bit, 0);
+ matched = true;
+ }
+
+ return matched;
+}
+
+static long aspeed_p2a_ioctl(struct file *file, unsigned int cmd,
+ unsigned long data)
+{
+ struct aspeed_p2a_user *priv = file->private_data;
+ struct aspeed_p2a_ctrl *ctrl = priv->parent;
+ void __user *arg = (void __user *)data;
+ struct aspeed_p2a_ctrl_mapping map;
+
+ if (copy_from_user(&map, arg, sizeof(map)))
+ return -EFAULT;
+
+ switch (cmd) {
+ case ASPEED_P2A_CTRL_IOCTL_SET_WINDOW:
+ /* If they want a region to be read-only, since the entire
+ * region is read-only once enabled, we just need to track this
+ * user wants to read from the bridge, and if it's not enabled.
+ * Enable it.
+ */
+ if (map.flags == ASPEED_P2A_CTRL_READ_ONLY) {
+ mutex_lock(&ctrl->tracking);
+ ctrl->readers += 1;
+ mutex_unlock(&ctrl->tracking);
+
+ /* Track with the user, so when they close their file,
+ * we can decrement properly.
+ */
+ priv->read += 1;
+ } else if (map.flags == ASPEED_P2A_CTRL_READWRITE) {
+ /* If we don't acquire any region return error. */
+ if (!aspeed_p2a_region_acquire(priv, ctrl, &map)) {
+ return -EINVAL;
+ }
+ } else {
+ /* Invalid map flags. */
+ return -EINVAL;
+ }
+
+ aspeed_p2a_enable_bridge(ctrl);
+ return 0;
+ case ASPEED_P2A_CTRL_IOCTL_GET_MEMORY_CONFIG:
+ /* This is a request for the memory-region and corresponding
+ * length that is used by the driver for mmap.
+ */
+
+ map.flags = 0;
+ map.addr = ctrl->mem_base;
+ map.length = ctrl->mem_size;
+
+ return copy_to_user(arg, &map, sizeof(map)) ? -EFAULT : 0;
+ }
+
+ return -EINVAL;
+}
+
+
+/*
+ * When a user opens this file, we create a structure to track their mappings.
+ *
+ * A user can map a region as read-only (bridge enabled), or read-write (bit
+ * flipped, and bridge enabled). Either way, this tracking is used, s.t. when
+ * they release the device references are handled.
+ *
+ * The bridge is not enabled until a user calls an ioctl to map a region,
+ * simply opening the device does not enable it.
+ */
+static int aspeed_p2a_open(struct inode *inode, struct file *file)
+{
+ struct aspeed_p2a_user *priv;
+
+ priv = kmalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->file = file;
+ priv->read = 0;
+ memset(priv->readwrite, 0, sizeof(priv->readwrite));
+
+ /* The file's private_data is initialized to the p2a_ctrl. */
+ priv->parent = file->private_data;
+
+ /* Set the file's private_data to the user's data. */
+ file->private_data = priv;
+
+ return 0;
+}
+
+/*
+ * This will close the users mappings. It will go through what they had opened
+ * for readwrite, and decrement those counts. If at the end, this is the last
+ * user, it'll close the bridge.
+ */
+static int aspeed_p2a_release(struct inode *inode, struct file *file)
+{
+ int i;
+ u32 bits = 0;
+ bool open_regions = false;
+ struct aspeed_p2a_user *priv = file->private_data;
+
+ /* Lock others from changing these values until everything is updated
+ * in one pass.
+ */
+ mutex_lock(&priv->parent->tracking);
+
+ priv->parent->readers -= priv->read;
+
+ for (i = 0; i < P2A_REGION_COUNT; i++) {
+ priv->parent->readerwriters[i] -= priv->readwrite[i];
+
+ if (priv->parent->readerwriters[i] > 0)
+ open_regions = true;
+ else
+ bits |= priv->parent->config->regions[i].bit;
+ }
+
+ /* Setting a bit to 1 disables the region, so let's just OR with the
+ * above to disable any.
+ */
+
+ /* Note, if another user is trying to ioctl, they can't grab tracking,
+ * and therefore can't grab either register mutex.
+ * If another user is trying to close, they can't grab tracking either.
+ */
+ regmap_update_bits(priv->parent->regmap, SCU2C, bits, bits);
+
+ /* If parent->readers is zero and open windows is 0, disable the
+ * bridge.
+ */
+ if (!open_regions && priv->parent->readers == 0)
+ aspeed_p2a_disable_bridge(priv->parent);
+
+ mutex_unlock(&priv->parent->tracking);
+
+ kfree(priv);
+
+ return 0;
+}
+
+static const struct file_operations aspeed_p2a_ctrl_fops = {
+ .owner = THIS_MODULE,
+ .mmap = aspeed_p2a_mmap,
+ .unlocked_ioctl = aspeed_p2a_ioctl,
+ .open = aspeed_p2a_open,
+ .release = aspeed_p2a_release,
+};
+
+/* The regions are controlled by SCU2C */
+static void aspeed_p2a_disable_all(struct aspeed_p2a_ctrl *p2a_ctrl)
+{
+ int i;
+ u32 value = 0;
+
+ for (i = 0; i < P2A_REGION_COUNT; i++)
+ value |= p2a_ctrl->config->regions[i].bit;
+
+ regmap_update_bits(p2a_ctrl->regmap, SCU2C, value, value);
+
+ /* Disable the bridge. */
+ aspeed_p2a_disable_bridge(p2a_ctrl);
+}
+
+static int aspeed_p2a_ctrl_probe(struct platform_device *pdev)
+{
+ struct aspeed_p2a_ctrl *misc_ctrl;
+ struct device *dev;
+ struct resource resm;
+ struct device_node *node;
+ int rc = 0;
+
+ dev = &pdev->dev;
+
+ misc_ctrl = devm_kzalloc(dev, sizeof(*misc_ctrl), GFP_KERNEL);
+ if (!misc_ctrl)
+ return -ENOMEM;
+
+ mutex_init(&misc_ctrl->tracking);
+
+ /* optional. */
+ node = of_parse_phandle(dev->of_node, "memory-region", 0);
+ if (node) {
+ rc = of_address_to_resource(node, 0, &resm);
+ of_node_put(node);
+ if (rc) {
+ dev_err(dev, "Couldn't address to resource for reserved memory\n");
+ return -ENODEV;
+ }
+
+ misc_ctrl->mem_size = resource_size(&resm);
+ misc_ctrl->mem_base = resm.start;
+ }
+
+ misc_ctrl->regmap = syscon_node_to_regmap(pdev->dev.parent->of_node);
+ if (IS_ERR(misc_ctrl->regmap)) {
+ dev_err(dev, "Couldn't get regmap\n");
+ return -ENODEV;
+ }
+
+ misc_ctrl->config = of_device_get_match_data(dev);
+
+ dev_set_drvdata(&pdev->dev, misc_ctrl);
+
+ aspeed_p2a_disable_all(misc_ctrl);
+
+ misc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
+ misc_ctrl->miscdev.name = DEVICE_NAME;
+ misc_ctrl->miscdev.fops = &aspeed_p2a_ctrl_fops;
+ misc_ctrl->miscdev.parent = dev;
+
+ rc = misc_register(&misc_ctrl->miscdev);
+ if (rc)
+ dev_err(dev, "Unable to register device\n");
+
+ return rc;
+}
+
+static int aspeed_p2a_ctrl_remove(struct platform_device *pdev)
+{
+ struct aspeed_p2a_ctrl *p2a_ctrl = dev_get_drvdata(&pdev->dev);
+
+ misc_deregister(&p2a_ctrl->miscdev);
+
+ return 0;
+}
+
+#define SCU2C_DRAM BIT(25)
+#define SCU2C_SPI BIT(24)
+#define SCU2C_SOC BIT(23)
+#define SCU2C_FLASH BIT(22)
+
+static const struct aspeed_p2a_model_data ast2400_model_data = {
+ .regions = {
+ {0x00000000, 0x17FFFFFF, SCU2C_FLASH},
+ {0x18000000, 0x1FFFFFFF, SCU2C_SOC},
+ {0x20000000, 0x2FFFFFFF, SCU2C_FLASH},
+ {0x30000000, 0x3FFFFFFF, SCU2C_SPI},
+ {0x40000000, 0x5FFFFFFF, SCU2C_DRAM},
+ {0x60000000, 0xFFFFFFFF, SCU2C_SOC},
+ }
+};
+
+static const struct aspeed_p2a_model_data ast2500_model_data = {
+ .regions = {
+ {0x00000000, 0x0FFFFFFF, SCU2C_FLASH},
+ {0x10000000, 0x1FFFFFFF, SCU2C_SOC},
+ {0x20000000, 0x3FFFFFFF, SCU2C_FLASH},
+ {0x40000000, 0x5FFFFFFF, SCU2C_SOC},
+ {0x60000000, 0x7FFFFFFF, SCU2C_SPI},
+ {0x80000000, 0xFFFFFFFF, SCU2C_DRAM},
+ }
+};
+
+static const struct of_device_id aspeed_p2a_ctrl_match[] = {
+ { .compatible = "aspeed,ast2400-p2a-ctrl",
+ .data = &ast2400_model_data },
+ { .compatible = "aspeed,ast2500-p2a-ctrl",
+ .data = &ast2500_model_data },
+ { },
+};
+
+static struct platform_driver aspeed_p2a_ctrl_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ .of_match_table = aspeed_p2a_ctrl_match,
+ },
+ .probe = aspeed_p2a_ctrl_probe,
+ .remove = aspeed_p2a_ctrl_remove,
+};
+
+module_platform_driver(aspeed_p2a_ctrl_driver);
+
+MODULE_DEVICE_TABLE(of, aspeed_p2a_ctrl_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Patrick Venture <venture@google.com>");
+MODULE_DESCRIPTION("Control for aspeed 2400/2500 P2A VGA HOST to BMC mappings");
diff --git a/drivers/soc/aspeed/aspeed-socinfo.c b/drivers/soc/aspeed/aspeed-socinfo.c
new file mode 100644
index 000000000..3f759121d
--- /dev/null
+++ b/drivers/soc/aspeed/aspeed-socinfo.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Copyright 2019 IBM Corp. */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+
+static struct {
+ const char *name;
+ const u32 id;
+} const rev_table[] = {
+ /* AST2400 */
+ { "AST2400", 0x02000303 },
+ { "AST1400", 0x02010103 },
+ { "AST1250", 0x02010303 },
+ /* AST2500 */
+ { "AST2500", 0x04000303 },
+ { "AST2510", 0x04000103 },
+ { "AST2520", 0x04000203 },
+ { "AST2530", 0x04000403 },
+ /* AST2600 */
+ { "AST2600", 0x05000303 },
+ { "AST2620", 0x05010203 },
+ { "AST2605", 0x05030103 },
+ { "AST2625", 0x05030403 },
+};
+
+static const char *siliconid_to_name(u32 siliconid)
+{
+ unsigned int id = siliconid & 0xff00ffff;
+ unsigned int i;
+
+ for (i = 0 ; i < ARRAY_SIZE(rev_table) ; ++i) {
+ if (rev_table[i].id == id)
+ return rev_table[i].name;
+ }
+
+ return "Unknown";
+}
+
+static const char *siliconid_to_rev(u32 siliconid)
+{
+ unsigned int rev = (siliconid >> 16) & 0xff;
+ unsigned int gen = (siliconid >> 24) & 0xff;
+
+ if (gen < 0x5) {
+ /* AST2500 and below */
+ switch (rev) {
+ case 0:
+ return "A0";
+ case 1:
+ return "A1";
+ case 3:
+ return "A2";
+ }
+ } else {
+ /* AST2600 */
+ switch (rev) {
+ case 0:
+ return "A0";
+ case 1:
+ return "A1";
+ case 2:
+ return "A2";
+ case 3:
+ return "A3";
+ }
+ }
+
+ return "??";
+}
+
+static int __init aspeed_socinfo_init(void)
+{
+ struct soc_device_attribute *attrs;
+ struct soc_device *soc_dev;
+ struct device_node *np;
+ void __iomem *reg;
+ bool has_chipid = false;
+ u32 siliconid;
+ u32 chipid[2];
+ const char *machine = NULL;
+
+ np = of_find_compatible_node(NULL, NULL, "aspeed,silicon-id");
+ if (!of_device_is_available(np)) {
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ reg = of_iomap(np, 0);
+ if (!reg) {
+ of_node_put(np);
+ return -ENODEV;
+ }
+ siliconid = readl(reg);
+ iounmap(reg);
+
+ /* This is optional, the ast2400 does not have it */
+ reg = of_iomap(np, 1);
+ if (reg) {
+ has_chipid = true;
+ chipid[0] = readl(reg);
+ chipid[1] = readl(reg + 4);
+ iounmap(reg);
+ }
+ of_node_put(np);
+
+ attrs = kzalloc(sizeof(*attrs), GFP_KERNEL);
+ if (!attrs)
+ return -ENODEV;
+
+ /*
+ * Machine: Romulus BMC
+ * Family: AST2500
+ * Revision: A1
+ * SoC ID: raw silicon revision id
+ * Serial Number: 64-bit chipid
+ */
+
+ np = of_find_node_by_path("/");
+ of_property_read_string(np, "model", &machine);
+ if (machine)
+ attrs->machine = kstrdup(machine, GFP_KERNEL);
+ of_node_put(np);
+
+ attrs->family = siliconid_to_name(siliconid);
+ attrs->revision = siliconid_to_rev(siliconid);
+ attrs->soc_id = kasprintf(GFP_KERNEL, "%08x", siliconid);
+
+ if (has_chipid)
+ attrs->serial_number = kasprintf(GFP_KERNEL, "%08x%08x",
+ chipid[1], chipid[0]);
+
+ soc_dev = soc_device_register(attrs);
+ if (IS_ERR(soc_dev)) {
+ kfree(attrs->machine);
+ kfree(attrs->soc_id);
+ kfree(attrs->serial_number);
+ kfree(attrs);
+ return PTR_ERR(soc_dev);
+ }
+
+ pr_info("ASPEED %s rev %s (%s)\n",
+ attrs->family,
+ attrs->revision,
+ attrs->soc_id);
+
+ return 0;
+}
+early_initcall(aspeed_socinfo_init);
diff --git a/drivers/soc/aspeed/aspeed-uart-routing.c b/drivers/soc/aspeed/aspeed-uart-routing.c
new file mode 100644
index 000000000..59123e1f2
--- /dev/null
+++ b/drivers/soc/aspeed/aspeed-uart-routing.c
@@ -0,0 +1,603 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2018 Google LLC
+ * Copyright (c) 2021 Aspeed Technology Inc.
+ */
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+
+/* register offsets */
+#define HICR9 0x98
+#define HICRA 0x9c
+
+/* attributes options */
+#define UART_ROUTING_IO1 "io1"
+#define UART_ROUTING_IO2 "io2"
+#define UART_ROUTING_IO3 "io3"
+#define UART_ROUTING_IO4 "io4"
+#define UART_ROUTING_IO5 "io5"
+#define UART_ROUTING_IO6 "io6"
+#define UART_ROUTING_IO10 "io10"
+#define UART_ROUTING_UART1 "uart1"
+#define UART_ROUTING_UART2 "uart2"
+#define UART_ROUTING_UART3 "uart3"
+#define UART_ROUTING_UART4 "uart4"
+#define UART_ROUTING_UART5 "uart5"
+#define UART_ROUTING_UART6 "uart6"
+#define UART_ROUTING_UART10 "uart10"
+#define UART_ROUTING_RES "reserved"
+
+struct aspeed_uart_routing {
+ struct regmap *map;
+ struct attribute_group const *attr_grp;
+};
+
+struct aspeed_uart_routing_selector {
+ struct device_attribute dev_attr;
+ uint8_t reg;
+ uint8_t mask;
+ uint8_t shift;
+ const char *const options[];
+};
+
+#define to_routing_selector(_dev_attr) \
+ container_of(_dev_attr, struct aspeed_uart_routing_selector, dev_attr)
+
+static ssize_t aspeed_uart_routing_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+static ssize_t aspeed_uart_routing_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count);
+
+#define ROUTING_ATTR(_name) { \
+ .attr = {.name = _name, \
+ .mode = VERIFY_OCTAL_PERMISSIONS(0644) }, \
+ .show = aspeed_uart_routing_show, \
+ .store = aspeed_uart_routing_store, \
+}
+
+/* routing selector for AST25xx */
+static struct aspeed_uart_routing_selector ast2500_io6_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_IO6),
+ .reg = HICR9,
+ .shift = 8,
+ .mask = 0xf,
+ .options = {
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ UART_ROUTING_UART5,
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO2,
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO4,
+ UART_ROUTING_IO5,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2500_uart5_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_UART5),
+ .reg = HICRA,
+ .shift = 28,
+ .mask = 0xf,
+ .options = {
+ UART_ROUTING_IO5,
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO2,
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO4,
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ UART_ROUTING_IO6,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2500_uart4_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_UART4),
+ .reg = HICRA,
+ .shift = 25,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_IO4,
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO2,
+ UART_ROUTING_IO3,
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_IO6,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2500_uart3_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_UART3),
+ .reg = HICRA,
+ .shift = 22,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO4,
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO2,
+ UART_ROUTING_UART4,
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_IO6,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2500_uart2_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_UART2),
+ .reg = HICRA,
+ .shift = 19,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_IO2,
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO4,
+ UART_ROUTING_IO1,
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ UART_ROUTING_UART1,
+ UART_ROUTING_IO6,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2500_uart1_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_UART1),
+ .reg = HICRA,
+ .shift = 16,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO2,
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO4,
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ UART_ROUTING_IO6,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2500_io5_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_IO5),
+ .reg = HICRA,
+ .shift = 12,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_UART5,
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO6,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2500_io4_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_IO4),
+ .reg = HICRA,
+ .shift = 9,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_UART4,
+ UART_ROUTING_UART5,
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO2,
+ UART_ROUTING_IO6,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2500_io3_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_IO3),
+ .reg = HICRA,
+ .shift = 6,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ UART_ROUTING_UART5,
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO2,
+ UART_ROUTING_IO6,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2500_io2_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_IO2),
+ .reg = HICRA,
+ .shift = 3,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ UART_ROUTING_UART5,
+ UART_ROUTING_UART1,
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO4,
+ UART_ROUTING_IO6,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2500_io1_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_IO1),
+ .reg = HICRA,
+ .shift = 0,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ UART_ROUTING_UART5,
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO4,
+ UART_ROUTING_IO6,
+ NULL,
+ },
+};
+
+static struct attribute *ast2500_uart_routing_attrs[] = {
+ &ast2500_io6_sel.dev_attr.attr,
+ &ast2500_uart5_sel.dev_attr.attr,
+ &ast2500_uart4_sel.dev_attr.attr,
+ &ast2500_uart3_sel.dev_attr.attr,
+ &ast2500_uart2_sel.dev_attr.attr,
+ &ast2500_uart1_sel.dev_attr.attr,
+ &ast2500_io5_sel.dev_attr.attr,
+ &ast2500_io4_sel.dev_attr.attr,
+ &ast2500_io3_sel.dev_attr.attr,
+ &ast2500_io2_sel.dev_attr.attr,
+ &ast2500_io1_sel.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ast2500_uart_routing_attr_group = {
+ .attrs = ast2500_uart_routing_attrs,
+};
+
+/* routing selector for AST26xx */
+static struct aspeed_uart_routing_selector ast2600_uart10_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_UART10),
+ .reg = HICR9,
+ .shift = 12,
+ .mask = 0xf,
+ .options = {
+ UART_ROUTING_IO10,
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO2,
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO4,
+ UART_ROUTING_RES,
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2600_io10_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_IO10),
+ .reg = HICR9,
+ .shift = 8,
+ .mask = 0xf,
+ .options = {
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ UART_ROUTING_RES,
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO2,
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO4,
+ UART_ROUTING_RES,
+ UART_ROUTING_UART10,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2600_uart4_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_UART4),
+ .reg = HICRA,
+ .shift = 25,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_IO4,
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO2,
+ UART_ROUTING_IO3,
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_IO10,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2600_uart3_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_UART3),
+ .reg = HICRA,
+ .shift = 22,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO4,
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO2,
+ UART_ROUTING_UART4,
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_IO10,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2600_uart2_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_UART2),
+ .reg = HICRA,
+ .shift = 19,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_IO2,
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO4,
+ UART_ROUTING_IO1,
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ UART_ROUTING_UART1,
+ UART_ROUTING_IO10,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2600_uart1_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_UART1),
+ .reg = HICRA,
+ .shift = 16,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO2,
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO4,
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ UART_ROUTING_IO10,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2600_io4_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_IO4),
+ .reg = HICRA,
+ .shift = 9,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_UART4,
+ UART_ROUTING_UART10,
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO2,
+ UART_ROUTING_IO10,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2600_io3_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_IO3),
+ .reg = HICRA,
+ .shift = 6,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ UART_ROUTING_UART10,
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_IO1,
+ UART_ROUTING_IO2,
+ UART_ROUTING_IO10,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2600_io2_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_IO2),
+ .reg = HICRA,
+ .shift = 3,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ UART_ROUTING_UART10,
+ UART_ROUTING_UART1,
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO4,
+ UART_ROUTING_IO10,
+ NULL,
+ },
+};
+
+static struct aspeed_uart_routing_selector ast2600_io1_sel = {
+ .dev_attr = ROUTING_ATTR(UART_ROUTING_IO1),
+ .reg = HICRA,
+ .shift = 0,
+ .mask = 0x7,
+ .options = {
+ UART_ROUTING_UART1,
+ UART_ROUTING_UART2,
+ UART_ROUTING_UART3,
+ UART_ROUTING_UART4,
+ UART_ROUTING_UART10,
+ UART_ROUTING_IO3,
+ UART_ROUTING_IO4,
+ UART_ROUTING_IO10,
+ NULL,
+ },
+};
+
+static struct attribute *ast2600_uart_routing_attrs[] = {
+ &ast2600_uart10_sel.dev_attr.attr,
+ &ast2600_io10_sel.dev_attr.attr,
+ &ast2600_uart4_sel.dev_attr.attr,
+ &ast2600_uart3_sel.dev_attr.attr,
+ &ast2600_uart2_sel.dev_attr.attr,
+ &ast2600_uart1_sel.dev_attr.attr,
+ &ast2600_io4_sel.dev_attr.attr,
+ &ast2600_io3_sel.dev_attr.attr,
+ &ast2600_io2_sel.dev_attr.attr,
+ &ast2600_io1_sel.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ast2600_uart_routing_attr_group = {
+ .attrs = ast2600_uart_routing_attrs,
+};
+
+static ssize_t aspeed_uart_routing_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct aspeed_uart_routing *uart_routing = dev_get_drvdata(dev);
+ struct aspeed_uart_routing_selector *sel = to_routing_selector(attr);
+ int val, pos, len;
+
+ regmap_read(uart_routing->map, sel->reg, &val);
+ val = (val >> sel->shift) & sel->mask;
+
+ len = 0;
+ for (pos = 0; sel->options[pos] != NULL; ++pos) {
+ if (pos == val)
+ len += sysfs_emit_at(buf, len, "[%s] ", sel->options[pos]);
+ else
+ len += sysfs_emit_at(buf, len, "%s ", sel->options[pos]);
+ }
+
+ if (val >= pos)
+ len += sysfs_emit_at(buf, len, "[unknown(%d)]", val);
+
+ len += sysfs_emit_at(buf, len, "\n");
+
+ return len;
+}
+
+static ssize_t aspeed_uart_routing_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct aspeed_uart_routing *uart_routing = dev_get_drvdata(dev);
+ struct aspeed_uart_routing_selector *sel = to_routing_selector(attr);
+ int val;
+
+ val = __sysfs_match_string(sel->options, -1, buf);
+ if (val < 0) {
+ dev_err(dev, "invalid value \"%s\"\n", buf);
+ return -EINVAL;
+ }
+
+ regmap_update_bits(uart_routing->map, sel->reg,
+ (sel->mask << sel->shift),
+ (val & sel->mask) << sel->shift);
+
+ return count;
+}
+
+static int aspeed_uart_routing_probe(struct platform_device *pdev)
+{
+ int rc;
+ struct device *dev = &pdev->dev;
+ struct aspeed_uart_routing *uart_routing;
+
+ uart_routing = devm_kzalloc(&pdev->dev, sizeof(*uart_routing), GFP_KERNEL);
+ if (!uart_routing)
+ return -ENOMEM;
+
+ uart_routing->map = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(uart_routing->map)) {
+ dev_err(dev, "cannot get regmap\n");
+ return PTR_ERR(uart_routing->map);
+ }
+
+ uart_routing->attr_grp = of_device_get_match_data(dev);
+
+ rc = sysfs_create_group(&dev->kobj, uart_routing->attr_grp);
+ if (rc < 0)
+ return rc;
+
+ dev_set_drvdata(dev, uart_routing);
+
+ dev_info(dev, "module loaded\n");
+
+ return 0;
+}
+
+static int aspeed_uart_routing_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct aspeed_uart_routing *uart_routing = platform_get_drvdata(pdev);
+
+ sysfs_remove_group(&dev->kobj, uart_routing->attr_grp);
+
+ return 0;
+}
+
+static const struct of_device_id aspeed_uart_routing_table[] = {
+ { .compatible = "aspeed,ast2400-uart-routing",
+ .data = &ast2500_uart_routing_attr_group },
+ { .compatible = "aspeed,ast2500-uart-routing",
+ .data = &ast2500_uart_routing_attr_group },
+ { .compatible = "aspeed,ast2600-uart-routing",
+ .data = &ast2600_uart_routing_attr_group },
+ { },
+};
+
+static struct platform_driver aspeed_uart_routing_driver = {
+ .driver = {
+ .name = "aspeed-uart-routing",
+ .of_match_table = aspeed_uart_routing_table,
+ },
+ .probe = aspeed_uart_routing_probe,
+ .remove = aspeed_uart_routing_remove,
+};
+
+module_platform_driver(aspeed_uart_routing_driver);
+
+MODULE_AUTHOR("Oskar Senft <osk@google.com>");
+MODULE_AUTHOR("Chia-Wei Wang <chiawei_wang@aspeedtech.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Driver to configure Aspeed UART routing");