summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-sprd-adi.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/spi/spi-sprd-adi.c
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/spi/spi-sprd-adi.c')
-rw-r--r--drivers/spi/spi-sprd-adi.c669
1 files changed, 669 insertions, 0 deletions
diff --git a/drivers/spi/spi-sprd-adi.c b/drivers/spi/spi-sprd-adi.c
new file mode 100644
index 000000000..1edbf44c0
--- /dev/null
+++ b/drivers/spi/spi-sprd-adi.c
@@ -0,0 +1,669 @@
+/*
+ * Copyright (C) 2017 Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/delay.h>
+#include <linux/hwspinlock.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/spi/spi.h>
+#include <linux/sizes.h>
+
+/* Registers definitions for ADI controller */
+#define REG_ADI_CTRL0 0x4
+#define REG_ADI_CHN_PRIL 0x8
+#define REG_ADI_CHN_PRIH 0xc
+#define REG_ADI_INT_EN 0x10
+#define REG_ADI_INT_RAW 0x14
+#define REG_ADI_INT_MASK 0x18
+#define REG_ADI_INT_CLR 0x1c
+#define REG_ADI_GSSI_CFG0 0x20
+#define REG_ADI_GSSI_CFG1 0x24
+#define REG_ADI_RD_CMD 0x28
+#define REG_ADI_RD_DATA 0x2c
+#define REG_ADI_ARM_FIFO_STS 0x30
+#define REG_ADI_STS 0x34
+#define REG_ADI_EVT_FIFO_STS 0x38
+#define REG_ADI_ARM_CMD_STS 0x3c
+#define REG_ADI_CHN_EN 0x40
+#define REG_ADI_CHN_ADDR(id) (0x44 + (id - 2) * 4)
+#define REG_ADI_CHN_EN1 0x20c
+
+/* Bits definitions for register REG_ADI_GSSI_CFG0 */
+#define BIT_CLK_ALL_ON BIT(30)
+
+/* Bits definitions for register REG_ADI_RD_DATA */
+#define BIT_RD_CMD_BUSY BIT(31)
+#define RD_ADDR_SHIFT 16
+#define RD_VALUE_MASK GENMASK(15, 0)
+#define RD_ADDR_MASK GENMASK(30, 16)
+
+/* Bits definitions for register REG_ADI_ARM_FIFO_STS */
+#define BIT_FIFO_FULL BIT(11)
+#define BIT_FIFO_EMPTY BIT(10)
+
+/*
+ * ADI slave devices include RTC, ADC, regulator, charger, thermal and so on.
+ * ADI supports 12/14bit address for r2p0, and additional 17bit for r3p0 or
+ * later versions. Since bit[1:0] are zero, so the spec describe them as
+ * 10/12/15bit address mode.
+ * The 10bit mode supports sigle slave, 12/15bit mode supports 3 slave, the
+ * high two bits is slave_id.
+ * The slave devices address offset is 0x8000 for 10/12bit address mode,
+ * and 0x20000 for 15bit mode.
+ */
+#define ADI_10BIT_SLAVE_ADDR_SIZE SZ_4K
+#define ADI_10BIT_SLAVE_OFFSET 0x8000
+#define ADI_12BIT_SLAVE_ADDR_SIZE SZ_16K
+#define ADI_12BIT_SLAVE_OFFSET 0x8000
+#define ADI_15BIT_SLAVE_ADDR_SIZE SZ_128K
+#define ADI_15BIT_SLAVE_OFFSET 0x20000
+
+/* Timeout (ms) for the trylock of hardware spinlocks */
+#define ADI_HWSPINLOCK_TIMEOUT 5000
+/*
+ * ADI controller has 50 channels including 2 software channels
+ * and 48 hardware channels.
+ */
+#define ADI_HW_CHNS 50
+
+#define ADI_FIFO_DRAIN_TIMEOUT 1000
+#define ADI_READ_TIMEOUT 2000
+
+/*
+ * Read back address from REG_ADI_RD_DATA bit[30:16] which maps to:
+ * REG_ADI_RD_CMD bit[14:0] for r2p0
+ * REG_ADI_RD_CMD bit[16:2] for r3p0
+ */
+#define RDBACK_ADDR_MASK_R2 GENMASK(14, 0)
+#define RDBACK_ADDR_MASK_R3 GENMASK(16, 2)
+#define RDBACK_ADDR_SHIFT_R3 2
+
+/* Registers definitions for PMIC watchdog controller */
+#define REG_WDG_LOAD_LOW 0x0
+#define REG_WDG_LOAD_HIGH 0x4
+#define REG_WDG_CTRL 0x8
+#define REG_WDG_LOCK 0x20
+
+/* Bits definitions for register REG_WDG_CTRL */
+#define BIT_WDG_RUN BIT(1)
+#define BIT_WDG_NEW BIT(2)
+#define BIT_WDG_RST BIT(3)
+
+/* Bits definitions for register REG_MODULE_EN */
+#define BIT_WDG_EN BIT(2)
+
+/* Registers definitions for PMIC */
+#define PMIC_RST_STATUS 0xee8
+#define PMIC_MODULE_EN 0xc08
+#define PMIC_CLK_EN 0xc18
+#define PMIC_WDG_BASE 0x80
+
+/* Definition of PMIC reset status register */
+#define HWRST_STATUS_SECURITY 0x02
+#define HWRST_STATUS_RECOVERY 0x20
+#define HWRST_STATUS_NORMAL 0x40
+#define HWRST_STATUS_ALARM 0x50
+#define HWRST_STATUS_SLEEP 0x60
+#define HWRST_STATUS_FASTBOOT 0x30
+#define HWRST_STATUS_SPECIAL 0x70
+#define HWRST_STATUS_PANIC 0x80
+#define HWRST_STATUS_CFTREBOOT 0x90
+#define HWRST_STATUS_AUTODLOADER 0xa0
+#define HWRST_STATUS_IQMODE 0xb0
+#define HWRST_STATUS_SPRDISK 0xc0
+#define HWRST_STATUS_FACTORYTEST 0xe0
+#define HWRST_STATUS_WATCHDOG 0xf0
+
+/* Use default timeout 50 ms that converts to watchdog values */
+#define WDG_LOAD_VAL ((50 * 32768) / 1000)
+#define WDG_LOAD_MASK GENMASK(15, 0)
+#define WDG_UNLOCK_KEY 0xe551
+
+struct sprd_adi_wdg {
+ u32 base;
+ u32 rst_sts;
+ u32 wdg_en;
+ u32 wdg_clk;
+};
+
+struct sprd_adi_data {
+ u32 slave_offset;
+ u32 slave_addr_size;
+ int (*read_check)(u32 val, u32 reg);
+ int (*restart)(struct notifier_block *this,
+ unsigned long mode, void *cmd);
+ void (*wdg_rst)(void *p);
+};
+
+struct sprd_adi {
+ struct spi_controller *ctlr;
+ struct device *dev;
+ void __iomem *base;
+ struct hwspinlock *hwlock;
+ unsigned long slave_vbase;
+ unsigned long slave_pbase;
+ struct notifier_block restart_handler;
+ const struct sprd_adi_data *data;
+};
+
+static int sprd_adi_check_addr(struct sprd_adi *sadi, u32 reg)
+{
+ if (reg >= sadi->data->slave_addr_size) {
+ dev_err(sadi->dev,
+ "slave address offset is incorrect, reg = 0x%x\n",
+ reg);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sprd_adi_drain_fifo(struct sprd_adi *sadi)
+{
+ u32 timeout = ADI_FIFO_DRAIN_TIMEOUT;
+ u32 sts;
+
+ do {
+ sts = readl_relaxed(sadi->base + REG_ADI_ARM_FIFO_STS);
+ if (sts & BIT_FIFO_EMPTY)
+ break;
+
+ cpu_relax();
+ } while (--timeout);
+
+ if (timeout == 0) {
+ dev_err(sadi->dev, "drain write fifo timeout\n");
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static int sprd_adi_fifo_is_full(struct sprd_adi *sadi)
+{
+ return readl_relaxed(sadi->base + REG_ADI_ARM_FIFO_STS) & BIT_FIFO_FULL;
+}
+
+static int sprd_adi_read_check(u32 val, u32 addr)
+{
+ u32 rd_addr;
+
+ rd_addr = (val & RD_ADDR_MASK) >> RD_ADDR_SHIFT;
+
+ if (rd_addr != addr) {
+ pr_err("ADI read error, addr = 0x%x, val = 0x%x\n", addr, val);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int sprd_adi_read_check_r2(u32 val, u32 reg)
+{
+ return sprd_adi_read_check(val, reg & RDBACK_ADDR_MASK_R2);
+}
+
+static int sprd_adi_read_check_r3(u32 val, u32 reg)
+{
+ return sprd_adi_read_check(val, (reg & RDBACK_ADDR_MASK_R3) >> RDBACK_ADDR_SHIFT_R3);
+}
+
+static int sprd_adi_read(struct sprd_adi *sadi, u32 reg, u32 *read_val)
+{
+ int read_timeout = ADI_READ_TIMEOUT;
+ unsigned long flags;
+ u32 val;
+ int ret = 0;
+
+ if (sadi->hwlock) {
+ ret = hwspin_lock_timeout_irqsave(sadi->hwlock,
+ ADI_HWSPINLOCK_TIMEOUT,
+ &flags);
+ if (ret) {
+ dev_err(sadi->dev, "get the hw lock failed\n");
+ return ret;
+ }
+ }
+
+ ret = sprd_adi_check_addr(sadi, reg);
+ if (ret)
+ goto out;
+
+ /*
+ * Set the slave address offset need to read into RD_CMD register,
+ * then ADI controller will start to transfer automatically.
+ */
+ writel_relaxed(reg, sadi->base + REG_ADI_RD_CMD);
+
+ /*
+ * Wait read operation complete, the BIT_RD_CMD_BUSY will be set
+ * simultaneously when writing read command to register, and the
+ * BIT_RD_CMD_BUSY will be cleared after the read operation is
+ * completed.
+ */
+ do {
+ val = readl_relaxed(sadi->base + REG_ADI_RD_DATA);
+ if (!(val & BIT_RD_CMD_BUSY))
+ break;
+
+ cpu_relax();
+ } while (--read_timeout);
+
+ if (read_timeout == 0) {
+ dev_err(sadi->dev, "ADI read timeout\n");
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /*
+ * The return value before adi r5p0 includes data and read register
+ * address, from bit 0to bit 15 are data, and from bit 16 to bit 30
+ * are read register address. Then we can check the returned register
+ * address to validate data.
+ */
+ if (sadi->data->read_check) {
+ ret = sadi->data->read_check(val, reg);
+ if (ret < 0)
+ goto out;
+ }
+
+ *read_val = val & RD_VALUE_MASK;
+
+out:
+ if (sadi->hwlock)
+ hwspin_unlock_irqrestore(sadi->hwlock, &flags);
+ return ret;
+}
+
+static int sprd_adi_write(struct sprd_adi *sadi, u32 reg, u32 val)
+{
+ u32 timeout = ADI_FIFO_DRAIN_TIMEOUT;
+ unsigned long flags;
+ int ret;
+
+ if (sadi->hwlock) {
+ ret = hwspin_lock_timeout_irqsave(sadi->hwlock,
+ ADI_HWSPINLOCK_TIMEOUT,
+ &flags);
+ if (ret) {
+ dev_err(sadi->dev, "get the hw lock failed\n");
+ return ret;
+ }
+ }
+
+ ret = sprd_adi_check_addr(sadi, reg);
+ if (ret)
+ goto out;
+
+ ret = sprd_adi_drain_fifo(sadi);
+ if (ret < 0)
+ goto out;
+
+ /*
+ * we should wait for write fifo is empty before writing data to PMIC
+ * registers.
+ */
+ do {
+ if (!sprd_adi_fifo_is_full(sadi)) {
+ /* we need virtual register address to write. */
+ writel_relaxed(val, (void __iomem *)(sadi->slave_vbase + reg));
+ break;
+ }
+
+ cpu_relax();
+ } while (--timeout);
+
+ if (timeout == 0) {
+ dev_err(sadi->dev, "write fifo is full\n");
+ ret = -EBUSY;
+ }
+
+out:
+ if (sadi->hwlock)
+ hwspin_unlock_irqrestore(sadi->hwlock, &flags);
+ return ret;
+}
+
+static int sprd_adi_transfer_one(struct spi_controller *ctlr,
+ struct spi_device *spi_dev,
+ struct spi_transfer *t)
+{
+ struct sprd_adi *sadi = spi_controller_get_devdata(ctlr);
+ u32 reg, val;
+ int ret;
+
+ if (t->rx_buf) {
+ reg = *(u32 *)t->rx_buf;
+ ret = sprd_adi_read(sadi, reg, &val);
+ *(u32 *)t->rx_buf = val;
+ } else if (t->tx_buf) {
+ u32 *p = (u32 *)t->tx_buf;
+ reg = *p++;
+ val = *p;
+ ret = sprd_adi_write(sadi, reg, val);
+ } else {
+ dev_err(sadi->dev, "no buffer for transfer\n");
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void sprd_adi_set_wdt_rst_mode(void *p)
+{
+#if IS_ENABLED(CONFIG_SPRD_WATCHDOG)
+ u32 val;
+ struct sprd_adi *sadi = (struct sprd_adi *)p;
+
+ /* Init watchdog reset mode */
+ sprd_adi_read(sadi, PMIC_RST_STATUS, &val);
+ val |= HWRST_STATUS_WATCHDOG;
+ sprd_adi_write(sadi, PMIC_RST_STATUS, val);
+#endif
+}
+
+static int sprd_adi_restart(struct notifier_block *this, unsigned long mode,
+ void *cmd, struct sprd_adi_wdg *wdg)
+{
+ struct sprd_adi *sadi = container_of(this, struct sprd_adi,
+ restart_handler);
+ u32 val, reboot_mode = 0;
+
+ if (!cmd)
+ reboot_mode = HWRST_STATUS_NORMAL;
+ else if (!strncmp(cmd, "recovery", 8))
+ reboot_mode = HWRST_STATUS_RECOVERY;
+ else if (!strncmp(cmd, "alarm", 5))
+ reboot_mode = HWRST_STATUS_ALARM;
+ else if (!strncmp(cmd, "fastsleep", 9))
+ reboot_mode = HWRST_STATUS_SLEEP;
+ else if (!strncmp(cmd, "bootloader", 10))
+ reboot_mode = HWRST_STATUS_FASTBOOT;
+ else if (!strncmp(cmd, "panic", 5))
+ reboot_mode = HWRST_STATUS_PANIC;
+ else if (!strncmp(cmd, "special", 7))
+ reboot_mode = HWRST_STATUS_SPECIAL;
+ else if (!strncmp(cmd, "cftreboot", 9))
+ reboot_mode = HWRST_STATUS_CFTREBOOT;
+ else if (!strncmp(cmd, "autodloader", 11))
+ reboot_mode = HWRST_STATUS_AUTODLOADER;
+ else if (!strncmp(cmd, "iqmode", 6))
+ reboot_mode = HWRST_STATUS_IQMODE;
+ else if (!strncmp(cmd, "sprdisk", 7))
+ reboot_mode = HWRST_STATUS_SPRDISK;
+ else if (!strncmp(cmd, "tospanic", 8))
+ reboot_mode = HWRST_STATUS_SECURITY;
+ else if (!strncmp(cmd, "factorytest", 11))
+ reboot_mode = HWRST_STATUS_FACTORYTEST;
+ else
+ reboot_mode = HWRST_STATUS_NORMAL;
+
+ /* Record the reboot mode */
+ sprd_adi_read(sadi, wdg->rst_sts, &val);
+ val &= ~HWRST_STATUS_WATCHDOG;
+ val |= reboot_mode;
+ sprd_adi_write(sadi, wdg->rst_sts, val);
+
+ /* Enable the interface clock of the watchdog */
+ sprd_adi_read(sadi, wdg->wdg_en, &val);
+ val |= BIT_WDG_EN;
+ sprd_adi_write(sadi, wdg->wdg_en, val);
+
+ /* Enable the work clock of the watchdog */
+ sprd_adi_read(sadi, wdg->wdg_clk, &val);
+ val |= BIT_WDG_EN;
+ sprd_adi_write(sadi, wdg->wdg_clk, val);
+
+ /* Unlock the watchdog */
+ sprd_adi_write(sadi, wdg->base + REG_WDG_LOCK, WDG_UNLOCK_KEY);
+
+ sprd_adi_read(sadi, wdg->base + REG_WDG_CTRL, &val);
+ val |= BIT_WDG_NEW;
+ sprd_adi_write(sadi, wdg->base + REG_WDG_CTRL, val);
+
+ /* Load the watchdog timeout value, 50ms is always enough. */
+ sprd_adi_write(sadi, wdg->base + REG_WDG_LOAD_HIGH, 0);
+ sprd_adi_write(sadi, wdg->base + REG_WDG_LOAD_LOW,
+ WDG_LOAD_VAL & WDG_LOAD_MASK);
+
+ /* Start the watchdog to reset system */
+ sprd_adi_read(sadi, wdg->base + REG_WDG_CTRL, &val);
+ val |= BIT_WDG_RUN | BIT_WDG_RST;
+ sprd_adi_write(sadi, wdg->base + REG_WDG_CTRL, val);
+
+ /* Lock the watchdog */
+ sprd_adi_write(sadi, wdg->base + REG_WDG_LOCK, ~WDG_UNLOCK_KEY);
+
+ mdelay(1000);
+
+ dev_emerg(sadi->dev, "Unable to restart system\n");
+ return NOTIFY_DONE;
+}
+
+static int sprd_adi_restart_sc9860(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct sprd_adi_wdg wdg = {
+ .base = PMIC_WDG_BASE,
+ .rst_sts = PMIC_RST_STATUS,
+ .wdg_en = PMIC_MODULE_EN,
+ .wdg_clk = PMIC_CLK_EN,
+ };
+
+ return sprd_adi_restart(this, mode, cmd, &wdg);
+}
+
+static void sprd_adi_hw_init(struct sprd_adi *sadi)
+{
+ struct device_node *np = sadi->dev->of_node;
+ int i, size, chn_cnt;
+ const __be32 *list;
+ u32 tmp;
+
+ /* Set all channels as default priority */
+ writel_relaxed(0, sadi->base + REG_ADI_CHN_PRIL);
+ writel_relaxed(0, sadi->base + REG_ADI_CHN_PRIH);
+
+ /* Set clock auto gate mode */
+ tmp = readl_relaxed(sadi->base + REG_ADI_GSSI_CFG0);
+ tmp &= ~BIT_CLK_ALL_ON;
+ writel_relaxed(tmp, sadi->base + REG_ADI_GSSI_CFG0);
+
+ /* Set hardware channels setting */
+ list = of_get_property(np, "sprd,hw-channels", &size);
+ if (!list || !size) {
+ dev_info(sadi->dev, "no hw channels setting in node\n");
+ return;
+ }
+
+ chn_cnt = size / 8;
+ for (i = 0; i < chn_cnt; i++) {
+ u32 value;
+ u32 chn_id = be32_to_cpu(*list++);
+ u32 chn_config = be32_to_cpu(*list++);
+
+ /* Channel 0 and 1 are software channels */
+ if (chn_id < 2)
+ continue;
+
+ writel_relaxed(chn_config, sadi->base +
+ REG_ADI_CHN_ADDR(chn_id));
+
+ if (chn_id < 32) {
+ value = readl_relaxed(sadi->base + REG_ADI_CHN_EN);
+ value |= BIT(chn_id);
+ writel_relaxed(value, sadi->base + REG_ADI_CHN_EN);
+ } else if (chn_id < ADI_HW_CHNS) {
+ value = readl_relaxed(sadi->base + REG_ADI_CHN_EN1);
+ value |= BIT(chn_id - 32);
+ writel_relaxed(value, sadi->base + REG_ADI_CHN_EN1);
+ }
+ }
+}
+
+static int sprd_adi_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ const struct sprd_adi_data *data;
+ struct spi_controller *ctlr;
+ struct sprd_adi *sadi;
+ struct resource *res;
+ u16 num_chipselect;
+ int ret;
+
+ if (!np) {
+ dev_err(&pdev->dev, "can not find the adi bus node\n");
+ return -ENODEV;
+ }
+
+ data = of_device_get_match_data(&pdev->dev);
+ if (!data) {
+ dev_err(&pdev->dev, "no matching driver data found\n");
+ return -EINVAL;
+ }
+
+ pdev->id = of_alias_get_id(np, "spi");
+ num_chipselect = of_get_child_count(np);
+
+ ctlr = spi_alloc_master(&pdev->dev, sizeof(struct sprd_adi));
+ if (!ctlr)
+ return -ENOMEM;
+
+ dev_set_drvdata(&pdev->dev, ctlr);
+ sadi = spi_controller_get_devdata(ctlr);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sadi->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(sadi->base)) {
+ ret = PTR_ERR(sadi->base);
+ goto put_ctlr;
+ }
+
+ sadi->slave_vbase = (unsigned long)sadi->base +
+ data->slave_offset;
+ sadi->slave_pbase = res->start + data->slave_offset;
+ sadi->ctlr = ctlr;
+ sadi->dev = &pdev->dev;
+ sadi->data = data;
+ ret = of_hwspin_lock_get_id(np, 0);
+ if (ret > 0 || (IS_ENABLED(CONFIG_HWSPINLOCK) && ret == 0)) {
+ sadi->hwlock =
+ devm_hwspin_lock_request_specific(&pdev->dev, ret);
+ if (!sadi->hwlock) {
+ ret = -ENXIO;
+ goto put_ctlr;
+ }
+ } else {
+ switch (ret) {
+ case -ENOENT:
+ dev_info(&pdev->dev, "no hardware spinlock supplied\n");
+ break;
+ default:
+ dev_err_probe(&pdev->dev, ret, "failed to find hwlock id\n");
+ goto put_ctlr;
+ }
+ }
+
+ sprd_adi_hw_init(sadi);
+
+ if (sadi->data->wdg_rst)
+ sadi->data->wdg_rst(sadi);
+
+ ctlr->dev.of_node = pdev->dev.of_node;
+ ctlr->bus_num = pdev->id;
+ ctlr->num_chipselect = num_chipselect;
+ ctlr->flags = SPI_MASTER_HALF_DUPLEX;
+ ctlr->bits_per_word_mask = 0;
+ ctlr->transfer_one = sprd_adi_transfer_one;
+
+ ret = devm_spi_register_controller(&pdev->dev, ctlr);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register SPI controller\n");
+ goto put_ctlr;
+ }
+
+ if (sadi->data->restart) {
+ sadi->restart_handler.notifier_call = sadi->data->restart;
+ sadi->restart_handler.priority = 128;
+ ret = register_restart_handler(&sadi->restart_handler);
+ if (ret) {
+ dev_err(&pdev->dev, "can not register restart handler\n");
+ goto put_ctlr;
+ }
+ }
+
+ return 0;
+
+put_ctlr:
+ spi_controller_put(ctlr);
+ return ret;
+}
+
+static int sprd_adi_remove(struct platform_device *pdev)
+{
+ struct spi_controller *ctlr = dev_get_drvdata(&pdev->dev);
+ struct sprd_adi *sadi = spi_controller_get_devdata(ctlr);
+
+ unregister_restart_handler(&sadi->restart_handler);
+ return 0;
+}
+
+static struct sprd_adi_data sc9860_data = {
+ .slave_offset = ADI_10BIT_SLAVE_OFFSET,
+ .slave_addr_size = ADI_10BIT_SLAVE_ADDR_SIZE,
+ .read_check = sprd_adi_read_check_r2,
+ .restart = sprd_adi_restart_sc9860,
+ .wdg_rst = sprd_adi_set_wdt_rst_mode,
+};
+
+static struct sprd_adi_data sc9863_data = {
+ .slave_offset = ADI_12BIT_SLAVE_OFFSET,
+ .slave_addr_size = ADI_12BIT_SLAVE_ADDR_SIZE,
+ .read_check = sprd_adi_read_check_r3,
+};
+
+static struct sprd_adi_data ums512_data = {
+ .slave_offset = ADI_15BIT_SLAVE_OFFSET,
+ .slave_addr_size = ADI_15BIT_SLAVE_ADDR_SIZE,
+ .read_check = sprd_adi_read_check_r3,
+};
+
+static const struct of_device_id sprd_adi_of_match[] = {
+ {
+ .compatible = "sprd,sc9860-adi",
+ .data = &sc9860_data,
+ },
+ {
+ .compatible = "sprd,sc9863-adi",
+ .data = &sc9863_data,
+ },
+ {
+ .compatible = "sprd,ums512-adi",
+ .data = &ums512_data,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sprd_adi_of_match);
+
+static struct platform_driver sprd_adi_driver = {
+ .driver = {
+ .name = "sprd-adi",
+ .of_match_table = sprd_adi_of_match,
+ },
+ .probe = sprd_adi_probe,
+ .remove = sprd_adi_remove,
+};
+module_platform_driver(sprd_adi_driver);
+
+MODULE_DESCRIPTION("Spreadtrum ADI Controller Driver");
+MODULE_AUTHOR("Baolin Wang <Baolin.Wang@spreadtrum.com>");
+MODULE_LICENSE("GPL v2");