Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 931 insertions, 0 deletions

diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
new file mode 100644
index 000000000..2d25231fa
--- /dev/null
+++ b/drivers/tty/serial/pxa.c
@@ -0,0 +1,931 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Based on drivers/serial/8250.c by Russell King.
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Feb 20, 2003
+ *  Copyright:	(C) 2003 Monta Vista Software, Inc.
+ *
+ * Note 1: This driver is made separate from the already too overloaded
+ * 8250.c because it needs some kirks of its own and that'll make it
+ * easier to add DMA support.
+ *
+ * Note 2: I'm too sick of device allocation policies for serial ports.
+ * If someone else wants to request an "official" allocation of major/minor
+ * for this driver please be my guest.  And don't forget that new hardware
+ * to come from Intel might have more than 3 or 4 of those UARTs.  Let's
+ * hope for a better port registration and dynamic device allocation scheme
+ * with the serial core maintainer satisfaction to appear soon.
+ */
+
+
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/circ_buf.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define PXA_NAME_LEN		8
+
+struct uart_pxa_port {
+	struct uart_port        port;
+	unsigned char           ier;
+	unsigned char           lcr;
+	unsigned char           mcr;
+	unsigned int            lsr_break_flag;
+	struct clk		*clk;
+	char			name[PXA_NAME_LEN];
+};
+
+static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
+{
+	offset <<= 2;
+	return readl(up->port.membase + offset);
+}
+
+static inline void serial_out(struct uart_pxa_port *up, int offset, int value)
+{
+	offset <<= 2;
+	writel(value, up->port.membase + offset);
+}
+
+static void serial_pxa_enable_ms(struct uart_port *port)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+	up->ier |= UART_IER_MSI;
+	serial_out(up, UART_IER, up->ier);
+}
+
+static void serial_pxa_stop_tx(struct uart_port *port)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+	if (up->ier & UART_IER_THRI) {
+		up->ier &= ~UART_IER_THRI;
+		serial_out(up, UART_IER, up->ier);
+	}
+}
+
+static void serial_pxa_stop_rx(struct uart_port *port)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+	up->ier &= ~UART_IER_RLSI;
+	up->port.read_status_mask &= ~UART_LSR_DR;
+	serial_out(up, UART_IER, up->ier);
+}
+
+static inline void receive_chars(struct uart_pxa_port *up, int *status)
+{
+	unsigned int ch, flag;
+	int max_count = 256;
+
+	do {
+		/* work around Errata #20 according to
+		 * Intel(R) PXA27x Processor Family
+		 * Specification Update (May 2005)
+		 *
+		 * Step 2
+		 * Disable the Reciever Time Out Interrupt via IER[RTOEI]
+		 */
+		up->ier &= ~UART_IER_RTOIE;
+		serial_out(up, UART_IER, up->ier);
+
+		ch = serial_in(up, UART_RX);
+		flag = TTY_NORMAL;
+		up->port.icount.rx++;
+
+		if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
+				       UART_LSR_FE | UART_LSR_OE))) {
+			/*
+			 * For statistics only
+			 */
+			if (*status & UART_LSR_BI) {
+				*status &= ~(UART_LSR_FE | UART_LSR_PE);
+				up->port.icount.brk++;
+				/*
+				 * We do the SysRQ and SAK checking
+				 * here because otherwise the break
+				 * may get masked by ignore_status_mask
+				 * or read_status_mask.
+				 */
+				if (uart_handle_break(&up->port))
+					goto ignore_char;
+			} else if (*status & UART_LSR_PE)
+				up->port.icount.parity++;
+			else if (*status & UART_LSR_FE)
+				up->port.icount.frame++;
+			if (*status & UART_LSR_OE)
+				up->port.icount.overrun++;
+
+			/*
+			 * Mask off conditions which should be ignored.
+			 */
+			*status &= up->port.read_status_mask;
+
+#ifdef CONFIG_SERIAL_PXA_CONSOLE
+			if (up->port.line == up->port.cons->index) {
+				/* Recover the break flag from console xmit */
+				*status |= up->lsr_break_flag;
+				up->lsr_break_flag = 0;
+			}
+#endif
+			if (*status & UART_LSR_BI) {
+				flag = TTY_BREAK;
+			} else if (*status & UART_LSR_PE)
+				flag = TTY_PARITY;
+			else if (*status & UART_LSR_FE)
+				flag = TTY_FRAME;
+		}
+
+		if (uart_handle_sysrq_char(&up->port, ch))
+			goto ignore_char;
+
+		uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
+
+	ignore_char:
+		*status = serial_in(up, UART_LSR);
+	} while ((*status & UART_LSR_DR) && (max_count-- > 0));
+	tty_flip_buffer_push(&up->port.state->port);
+
+	/* work around Errata #20 according to
+	 * Intel(R) PXA27x Processor Family
+	 * Specification Update (May 2005)
+	 *
+	 * Step 6:
+	 * No more data in FIFO: Re-enable RTO interrupt via IER[RTOIE]
+	 */
+	up->ier |= UART_IER_RTOIE;
+	serial_out(up, UART_IER, up->ier);
+}
+
+static void transmit_chars(struct uart_pxa_port *up)
+{
+	struct circ_buf *xmit = &up->port.state->xmit;
+	int count;
+
+	if (up->port.x_char) {
+		serial_out(up, UART_TX, up->port.x_char);
+		up->port.icount.tx++;
+		up->port.x_char = 0;
+		return;
+	}
+	if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+		serial_pxa_stop_tx(&up->port);
+		return;
+	}
+
+	count = up->port.fifosize / 2;
+	do {
+		serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		up->port.icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&up->port);
+
+
+	if (uart_circ_empty(xmit))
+		serial_pxa_stop_tx(&up->port);
+}
+
+static void serial_pxa_start_tx(struct uart_port *port)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+	if (!(up->ier & UART_IER_THRI)) {
+		up->ier |= UART_IER_THRI;
+		serial_out(up, UART_IER, up->ier);
+	}
+}
+
+/* should hold up->port.lock */
+static inline void check_modem_status(struct uart_pxa_port *up)
+{
+	int status;
+
+	status = serial_in(up, UART_MSR);
+
+	if ((status & UART_MSR_ANY_DELTA) == 0)
+		return;
+
+	if (status & UART_MSR_TERI)
+		up->port.icount.rng++;
+	if (status & UART_MSR_DDSR)
+		up->port.icount.dsr++;
+	if (status & UART_MSR_DDCD)
+		uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
+	if (status & UART_MSR_DCTS)
+		uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
+
+	wake_up_interruptible(&up->port.state->port.delta_msr_wait);
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id)
+{
+	struct uart_pxa_port *up = dev_id;
+	unsigned int iir, lsr;
+
+	iir = serial_in(up, UART_IIR);
+	if (iir & UART_IIR_NO_INT)
+		return IRQ_NONE;
+	spin_lock(&up->port.lock);
+	lsr = serial_in(up, UART_LSR);
+	if (lsr & UART_LSR_DR)
+		receive_chars(up, &lsr);
+	check_modem_status(up);
+	if (lsr & UART_LSR_THRE)
+		transmit_chars(up);
+	spin_unlock(&up->port.lock);
+	return IRQ_HANDLED;
+}
+
+static unsigned int serial_pxa_tx_empty(struct uart_port *port)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+	unsigned long flags;
+	unsigned int ret;
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+	spin_unlock_irqrestore(&up->port.lock, flags);
+
+	return ret;
+}
+
+static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+	unsigned char status;
+	unsigned int ret;
+
+	status = serial_in(up, UART_MSR);
+
+	ret = 0;
+	if (status & UART_MSR_DCD)
+		ret |= TIOCM_CAR;
+	if (status & UART_MSR_RI)
+		ret |= TIOCM_RNG;
+	if (status & UART_MSR_DSR)
+		ret |= TIOCM_DSR;
+	if (status & UART_MSR_CTS)
+		ret |= TIOCM_CTS;
+	return ret;
+}
+
+static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+	unsigned char mcr = 0;
+
+	if (mctrl & TIOCM_RTS)
+		mcr |= UART_MCR_RTS;
+	if (mctrl & TIOCM_DTR)
+		mcr |= UART_MCR_DTR;
+	if (mctrl & TIOCM_OUT1)
+		mcr |= UART_MCR_OUT1;
+	if (mctrl & TIOCM_OUT2)
+		mcr |= UART_MCR_OUT2;
+	if (mctrl & TIOCM_LOOP)
+		mcr |= UART_MCR_LOOP;
+
+	mcr |= up->mcr;
+
+	serial_out(up, UART_MCR, mcr);
+}
+
+static void serial_pxa_break_ctl(struct uart_port *port, int break_state)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	if (break_state == -1)
+		up->lcr |= UART_LCR_SBC;
+	else
+		up->lcr &= ~UART_LCR_SBC;
+	serial_out(up, UART_LCR, up->lcr);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int serial_pxa_startup(struct uart_port *port)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+	unsigned long flags;
+	int retval;
+
+	if (port->line == 3) /* HWUART */
+		up->mcr |= UART_MCR_AFE;
+	else
+		up->mcr = 0;
+
+	up->port.uartclk = clk_get_rate(up->clk);
+
+	/*
+	 * Allocate the IRQ
+	 */
+	retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up);
+	if (retval)
+		return retval;
+
+	/*
+	 * Clear the FIFO buffers and disable them.
+	 * (they will be reenabled in set_termios())
+	 */
+	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+			UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+	serial_out(up, UART_FCR, 0);
+
+	/*
+	 * Clear the interrupt registers.
+	 */
+	(void) serial_in(up, UART_LSR);
+	(void) serial_in(up, UART_RX);
+	(void) serial_in(up, UART_IIR);
+	(void) serial_in(up, UART_MSR);
+
+	/*
+	 * Now, initialize the UART
+	 */
+	serial_out(up, UART_LCR, UART_LCR_WLEN8);
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	up->port.mctrl |= TIOCM_OUT2;
+	serial_pxa_set_mctrl(&up->port, up->port.mctrl);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+
+	/*
+	 * Finally, enable interrupts.  Note: Modem status interrupts
+	 * are set via set_termios(), which will be occurring imminently
+	 * anyway, so we don't enable them here.
+	 */
+	up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
+	serial_out(up, UART_IER, up->ier);
+
+	/*
+	 * And clear the interrupt registers again for luck.
+	 */
+	(void) serial_in(up, UART_LSR);
+	(void) serial_in(up, UART_RX);
+	(void) serial_in(up, UART_IIR);
+	(void) serial_in(up, UART_MSR);
+
+	return 0;
+}
+
+static void serial_pxa_shutdown(struct uart_port *port)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+	unsigned long flags;
+
+	free_irq(up->port.irq, up);
+
+	/*
+	 * Disable interrupts from this port
+	 */
+	up->ier = 0;
+	serial_out(up, UART_IER, 0);
+
+	spin_lock_irqsave(&up->port.lock, flags);
+	up->port.mctrl &= ~TIOCM_OUT2;
+	serial_pxa_set_mctrl(&up->port, up->port.mctrl);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+
+	/*
+	 * Disable break condition and FIFOs
+	 */
+	serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
+	serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+				  UART_FCR_CLEAR_RCVR |
+				  UART_FCR_CLEAR_XMIT);
+	serial_out(up, UART_FCR, 0);
+}
+
+static void
+serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
+		       const struct ktermios *old)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+	unsigned char cval, fcr = 0;
+	unsigned long flags;
+	unsigned int baud, quot;
+	unsigned int dll;
+
+	cval = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag));
+
+	if (termios->c_cflag & CSTOPB)
+		cval |= UART_LCR_STOP;
+	if (termios->c_cflag & PARENB)
+		cval |= UART_LCR_PARITY;
+	if (!(termios->c_cflag & PARODD))
+		cval |= UART_LCR_EPAR;
+
+	/*
+	 * Ask the core to calculate the divisor for us.
+	 */
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+	quot = uart_get_divisor(port, baud);
+
+	if ((up->port.uartclk / quot) < (2400 * 16))
+		fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
+	else if ((up->port.uartclk / quot) < (230400 * 16))
+		fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
+	else
+		fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32;
+
+	/*
+	 * Ok, we're now changing the port state.  Do it with
+	 * interrupts disabled.
+	 */
+	spin_lock_irqsave(&up->port.lock, flags);
+
+	/*
+	 * Ensure the port will be enabled.
+	 * This is required especially for serial console.
+	 */
+	up->ier |= UART_IER_UUE;
+
+	/*
+	 * Update the per-port timeout.
+	 */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+	if (termios->c_iflag & INPCK)
+		up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+		up->port.read_status_mask |= UART_LSR_BI;
+
+	/*
+	 * Characters to ignore
+	 */
+	up->port.ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+	if (termios->c_iflag & IGNBRK) {
+		up->port.ignore_status_mask |= UART_LSR_BI;
+		/*
+		 * If we're ignoring parity and break indicators,
+		 * ignore overruns too (for real raw support).
+		 */
+		if (termios->c_iflag & IGNPAR)
+			up->port.ignore_status_mask |= UART_LSR_OE;
+	}
+
+	/*
+	 * ignore all characters if CREAD is not set
+	 */
+	if ((termios->c_cflag & CREAD) == 0)
+		up->port.ignore_status_mask |= UART_LSR_DR;
+
+	/*
+	 * CTS flow control flag and modem status interrupts
+	 */
+	up->ier &= ~UART_IER_MSI;
+	if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+		up->ier |= UART_IER_MSI;
+
+	serial_out(up, UART_IER, up->ier);
+
+	if (termios->c_cflag & CRTSCTS)
+		up->mcr |= UART_MCR_AFE;
+	else
+		up->mcr &= ~UART_MCR_AFE;
+
+	serial_out(up, UART_LCR, cval | UART_LCR_DLAB);	/* set DLAB */
+	serial_out(up, UART_DLL, quot & 0xff);		/* LS of divisor */
+
+	/*
+	 * work around Errata #75 according to Intel(R) PXA27x Processor Family
+	 * Specification Update (Nov 2005)
+	 */
+	dll = serial_in(up, UART_DLL);
+	WARN_ON(dll != (quot & 0xff));
+
+	serial_out(up, UART_DLM, quot >> 8);		/* MS of divisor */
+	serial_out(up, UART_LCR, cval);			/* reset DLAB */
+	up->lcr = cval;					/* Save LCR */
+	serial_pxa_set_mctrl(&up->port, up->port.mctrl);
+	serial_out(up, UART_FCR, fcr);
+	spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void
+serial_pxa_pm(struct uart_port *port, unsigned int state,
+	      unsigned int oldstate)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+	if (!state)
+		clk_prepare_enable(up->clk);
+	else
+		clk_disable_unprepare(up->clk);
+}
+
+static void serial_pxa_release_port(struct uart_port *port)
+{
+}
+
+static int serial_pxa_request_port(struct uart_port *port)
+{
+	return 0;
+}
+
+static void serial_pxa_config_port(struct uart_port *port, int flags)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+	up->port.type = PORT_PXA;
+}
+
+static int
+serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	/* we don't want the core code to modify any port params */
+	return -EINVAL;
+}
+
+static const char *
+serial_pxa_type(struct uart_port *port)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+	return up->name;
+}
+
+static struct uart_pxa_port *serial_pxa_ports[4];
+static struct uart_driver serial_pxa_reg;
+
+#ifdef CONFIG_SERIAL_PXA_CONSOLE
+
+/*
+ *	Wait for transmitter & holding register to empty
+ */
+static void wait_for_xmitr(struct uart_pxa_port *up)
+{
+	unsigned int status, tmout = 10000;
+
+	/* Wait up to 10ms for the character(s) to be sent. */
+	do {
+		status = serial_in(up, UART_LSR);
+
+		if (status & UART_LSR_BI)
+			up->lsr_break_flag = UART_LSR_BI;
+
+		if (--tmout == 0)
+			break;
+		udelay(1);
+	} while (!uart_lsr_tx_empty(status));
+
+	/* Wait up to 1s for flow control if necessary */
+	if (up->port.flags & UPF_CONS_FLOW) {
+		tmout = 1000000;
+		while (--tmout &&
+		       ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
+			udelay(1);
+	}
+}
+
+static void serial_pxa_console_putchar(struct uart_port *port, unsigned char ch)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+	wait_for_xmitr(up);
+	serial_out(up, UART_TX, ch);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ *	The console_lock must be held when we get here.
+ */
+static void
+serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
+{
+	struct uart_pxa_port *up = serial_pxa_ports[co->index];
+	unsigned int ier;
+	unsigned long flags;
+	int locked = 1;
+
+	clk_enable(up->clk);
+	local_irq_save(flags);
+	if (up->port.sysrq)
+		locked = 0;
+	else if (oops_in_progress)
+		locked = spin_trylock(&up->port.lock);
+	else
+		spin_lock(&up->port.lock);
+
+	/*
+	 *	First save the IER then disable the interrupts
+	 */
+	ier = serial_in(up, UART_IER);
+	serial_out(up, UART_IER, UART_IER_UUE);
+
+	uart_console_write(&up->port, s, count, serial_pxa_console_putchar);
+
+	/*
+	 *	Finally, wait for transmitter to become empty
+	 *	and restore the IER
+	 */
+	wait_for_xmitr(up);
+	serial_out(up, UART_IER, ier);
+
+	if (locked)
+		spin_unlock(&up->port.lock);
+	local_irq_restore(flags);
+	clk_disable(up->clk);
+
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static int serial_pxa_get_poll_char(struct uart_port *port)
+{
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+	unsigned char lsr = serial_in(up, UART_LSR);
+
+	while (!(lsr & UART_LSR_DR))
+		lsr = serial_in(up, UART_LSR);
+
+	return serial_in(up, UART_RX);
+}
+
+
+static void serial_pxa_put_poll_char(struct uart_port *port,
+			 unsigned char c)
+{
+	unsigned int ier;
+	struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+	/*
+	 *	First save the IER then disable the interrupts
+	 */
+	ier = serial_in(up, UART_IER);
+	serial_out(up, UART_IER, UART_IER_UUE);
+
+	wait_for_xmitr(up);
+	/*
+	 *	Send the character out.
+	 */
+	serial_out(up, UART_TX, c);
+
+	/*
+	 *	Finally, wait for transmitter to become empty
+	 *	and restore the IER
+	 */
+	wait_for_xmitr(up);
+	serial_out(up, UART_IER, ier);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
+static int __init
+serial_pxa_console_setup(struct console *co, char *options)
+{
+	struct uart_pxa_port *up;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index == -1 || co->index >= serial_pxa_reg.nr)
+		co->index = 0;
+	up = serial_pxa_ports[co->index];
+	if (!up)
+		return -ENODEV;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(&up->port, co, baud, parity, bits, flow);
+}
+
+static struct console serial_pxa_console = {
+	.name		= "ttyS",
+	.write		= serial_pxa_console_write,
+	.device		= uart_console_device,
+	.setup		= serial_pxa_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &serial_pxa_reg,
+};
+
+#define PXA_CONSOLE	&serial_pxa_console
+#else
+#define PXA_CONSOLE	NULL
+#endif
+
+static const struct uart_ops serial_pxa_pops = {
+	.tx_empty	= serial_pxa_tx_empty,
+	.set_mctrl	= serial_pxa_set_mctrl,
+	.get_mctrl	= serial_pxa_get_mctrl,
+	.stop_tx	= serial_pxa_stop_tx,
+	.start_tx	= serial_pxa_start_tx,
+	.stop_rx	= serial_pxa_stop_rx,
+	.enable_ms	= serial_pxa_enable_ms,
+	.break_ctl	= serial_pxa_break_ctl,
+	.startup	= serial_pxa_startup,
+	.shutdown	= serial_pxa_shutdown,
+	.set_termios	= serial_pxa_set_termios,
+	.pm		= serial_pxa_pm,
+	.type		= serial_pxa_type,
+	.release_port	= serial_pxa_release_port,
+	.request_port	= serial_pxa_request_port,
+	.config_port	= serial_pxa_config_port,
+	.verify_port	= serial_pxa_verify_port,
+#if defined(CONFIG_CONSOLE_POLL) && defined(CONFIG_SERIAL_PXA_CONSOLE)
+	.poll_get_char = serial_pxa_get_poll_char,
+	.poll_put_char = serial_pxa_put_poll_char,
+#endif
+};
+
+static struct uart_driver serial_pxa_reg = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "PXA serial",
+	.dev_name	= "ttyS",
+	.major		= TTY_MAJOR,
+	.minor		= 64,
+	.nr		= 4,
+	.cons		= PXA_CONSOLE,
+};
+
+#ifdef CONFIG_PM
+static int serial_pxa_suspend(struct device *dev)
+{
+        struct uart_pxa_port *sport = dev_get_drvdata(dev);
+
+        if (sport)
+                uart_suspend_port(&serial_pxa_reg, &sport->port);
+
+        return 0;
+}
+
+static int serial_pxa_resume(struct device *dev)
+{
+        struct uart_pxa_port *sport = dev_get_drvdata(dev);
+
+        if (sport)
+                uart_resume_port(&serial_pxa_reg, &sport->port);
+
+        return 0;
+}
+
+static const struct dev_pm_ops serial_pxa_pm_ops = {
+	.suspend	= serial_pxa_suspend,
+	.resume		= serial_pxa_resume,
+};
+#endif
+
+static const struct of_device_id serial_pxa_dt_ids[] = {
+	{ .compatible = "mrvl,pxa-uart", },
+	{ .compatible = "mrvl,mmp-uart", },
+	{}
+};
+
+static int serial_pxa_probe_dt(struct platform_device *pdev,
+			       struct uart_pxa_port *sport)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (!np)
+		return 1;
+
+	ret = of_alias_get_id(np, "serial");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+		return ret;
+	}
+	sport->port.line = ret;
+	return 0;
+}
+
+static int serial_pxa_probe(struct platform_device *dev)
+{
+	struct uart_pxa_port *sport;
+	struct resource *mmres;
+	int ret;
+	int irq;
+
+	mmres = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!mmres)
+		return -ENODEV;
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0)
+		return irq;
+
+	sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
+	if (!sport)
+		return -ENOMEM;
+
+	sport->clk = clk_get(&dev->dev, NULL);
+	if (IS_ERR(sport->clk)) {
+		ret = PTR_ERR(sport->clk);
+		goto err_free;
+	}
+
+	ret = clk_prepare(sport->clk);
+	if (ret) {
+		clk_put(sport->clk);
+		goto err_free;
+	}
+
+	sport->port.type = PORT_PXA;
+	sport->port.iotype = UPIO_MEM;
+	sport->port.mapbase = mmres->start;
+	sport->port.irq = irq;
+	sport->port.fifosize = 64;
+	sport->port.ops = &serial_pxa_pops;
+	sport->port.dev = &dev->dev;
+	sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
+	sport->port.uartclk = clk_get_rate(sport->clk);
+	sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PXA_CONSOLE);
+
+	ret = serial_pxa_probe_dt(dev, sport);
+	if (ret > 0)
+		sport->port.line = dev->id;
+	else if (ret < 0)
+		goto err_clk;
+	if (sport->port.line >= ARRAY_SIZE(serial_pxa_ports)) {
+		dev_err(&dev->dev, "serial%d out of range\n", sport->port.line);
+		ret = -EINVAL;
+		goto err_clk;
+	}
+	snprintf(sport->name, PXA_NAME_LEN - 1, "UART%d", sport->port.line + 1);
+
+	sport->port.membase = ioremap(mmres->start, resource_size(mmres));
+	if (!sport->port.membase) {
+		ret = -ENOMEM;
+		goto err_clk;
+	}
+
+	serial_pxa_ports[sport->port.line] = sport;
+
+	uart_add_one_port(&serial_pxa_reg, &sport->port);
+	platform_set_drvdata(dev, sport);
+
+	return 0;
+
+ err_clk:
+	clk_unprepare(sport->clk);
+	clk_put(sport->clk);
+ err_free:
+	kfree(sport);
+	return ret;
+}
+
+static struct platform_driver serial_pxa_driver = {
+        .probe          = serial_pxa_probe,
+
+	.driver		= {
+	        .name	= "pxa2xx-uart",
+#ifdef CONFIG_PM
+		.pm	= &serial_pxa_pm_ops,
+#endif
+		.suppress_bind_attrs = true,
+		.of_match_table = serial_pxa_dt_ids,
+	},
+};
+
+
+/* 8250 driver for PXA serial ports should be used */
+static int __init serial_pxa_init(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&serial_pxa_reg);
+	if (ret != 0)
+		return ret;
+
+	ret = platform_driver_register(&serial_pxa_driver);
+	if (ret != 0)
+		uart_unregister_driver(&serial_pxa_reg);
+
+	return ret;
+}
+device_initcall(serial_pxa_init);