Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1110 insertions, 0 deletions

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
new file mode 100644
index 000000000..93747ab2c
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -0,0 +1,1110 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ *
+ * Inspired by dwc3-of-simple.c
+ */
+
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/of_clk.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/extcon.h>
+#include <linux/interconnect.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/usb/of.h>
+#include <linux/reset.h>
+#include <linux/iopoll.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb.h>
+#include "core.h"
+
+/* USB QSCRATCH Hardware registers */
+#define QSCRATCH_HS_PHY_CTRL			0x10
+#define UTMI_OTG_VBUS_VALID			BIT(20)
+#define SW_SESSVLD_SEL				BIT(28)
+
+#define QSCRATCH_SS_PHY_CTRL			0x30
+#define LANE0_PWR_PRESENT			BIT(24)
+
+#define QSCRATCH_GENERAL_CFG			0x08
+#define PIPE_UTMI_CLK_SEL			BIT(0)
+#define PIPE3_PHYSTATUS_SW			BIT(3)
+#define PIPE_UTMI_CLK_DIS			BIT(8)
+
+#define PWR_EVNT_IRQ_STAT_REG			0x58
+#define PWR_EVNT_LPM_IN_L2_MASK			BIT(4)
+#define PWR_EVNT_LPM_OUT_L2_MASK		BIT(5)
+
+#define SDM845_QSCRATCH_BASE_OFFSET		0xf8800
+#define SDM845_QSCRATCH_SIZE			0x400
+#define SDM845_DWC3_CORE_SIZE			0xcd00
+
+/* Interconnect path bandwidths in MBps */
+#define USB_MEMORY_AVG_HS_BW MBps_to_icc(240)
+#define USB_MEMORY_PEAK_HS_BW MBps_to_icc(700)
+#define USB_MEMORY_AVG_SS_BW  MBps_to_icc(1000)
+#define USB_MEMORY_PEAK_SS_BW MBps_to_icc(2500)
+#define APPS_USB_AVG_BW 0
+#define APPS_USB_PEAK_BW MBps_to_icc(40)
+
+struct dwc3_acpi_pdata {
+	u32			qscratch_base_offset;
+	u32			qscratch_base_size;
+	u32			dwc3_core_base_size;
+	int			hs_phy_irq_index;
+	int			dp_hs_phy_irq_index;
+	int			dm_hs_phy_irq_index;
+	int			ss_phy_irq_index;
+	bool			is_urs;
+};
+
+struct dwc3_qcom {
+	struct device		*dev;
+	void __iomem		*qscratch_base;
+	struct platform_device	*dwc3;
+	struct platform_device	*urs_usb;
+	struct clk		**clks;
+	int			num_clocks;
+	struct reset_control	*resets;
+
+	int			hs_phy_irq;
+	int			dp_hs_phy_irq;
+	int			dm_hs_phy_irq;
+	int			ss_phy_irq;
+	enum usb_device_speed	usb2_speed;
+
+	struct extcon_dev	*edev;
+	struct extcon_dev	*host_edev;
+	struct notifier_block	vbus_nb;
+	struct notifier_block	host_nb;
+
+	const struct dwc3_acpi_pdata *acpi_pdata;
+
+	enum usb_dr_mode	mode;
+	bool			is_suspended;
+	bool			pm_suspended;
+	struct icc_path		*icc_path_ddr;
+	struct icc_path		*icc_path_apps;
+};
+
+static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
+{
+	u32 reg;
+
+	reg = readl(base + offset);
+	reg |= val;
+	writel(reg, base + offset);
+
+	/* ensure that above write is through */
+	readl(base + offset);
+}
+
+static inline void dwc3_qcom_clrbits(void __iomem *base, u32 offset, u32 val)
+{
+	u32 reg;
+
+	reg = readl(base + offset);
+	reg &= ~val;
+	writel(reg, base + offset);
+
+	/* ensure that above write is through */
+	readl(base + offset);
+}
+
+static void dwc3_qcom_vbus_override_enable(struct dwc3_qcom *qcom, bool enable)
+{
+	if (enable) {
+		dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
+				  LANE0_PWR_PRESENT);
+		dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL,
+				  UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL);
+	} else {
+		dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL,
+				  LANE0_PWR_PRESENT);
+		dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL,
+				  UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL);
+	}
+}
+
+static int dwc3_qcom_vbus_notifier(struct notifier_block *nb,
+				   unsigned long event, void *ptr)
+{
+	struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, vbus_nb);
+
+	/* enable vbus override for device mode */
+	dwc3_qcom_vbus_override_enable(qcom, event);
+	qcom->mode = event ? USB_DR_MODE_PERIPHERAL : USB_DR_MODE_HOST;
+
+	return NOTIFY_DONE;
+}
+
+static int dwc3_qcom_host_notifier(struct notifier_block *nb,
+				   unsigned long event, void *ptr)
+{
+	struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, host_nb);
+
+	/* disable vbus override in host mode */
+	dwc3_qcom_vbus_override_enable(qcom, !event);
+	qcom->mode = event ? USB_DR_MODE_HOST : USB_DR_MODE_PERIPHERAL;
+
+	return NOTIFY_DONE;
+}
+
+static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom)
+{
+	struct device		*dev = qcom->dev;
+	struct extcon_dev	*host_edev;
+	int			ret;
+
+	if (!of_property_read_bool(dev->of_node, "extcon"))
+		return 0;
+
+	qcom->edev = extcon_get_edev_by_phandle(dev, 0);
+	if (IS_ERR(qcom->edev))
+		return PTR_ERR(qcom->edev);
+
+	qcom->vbus_nb.notifier_call = dwc3_qcom_vbus_notifier;
+
+	qcom->host_edev = extcon_get_edev_by_phandle(dev, 1);
+	if (IS_ERR(qcom->host_edev))
+		qcom->host_edev = NULL;
+
+	ret = devm_extcon_register_notifier(dev, qcom->edev, EXTCON_USB,
+					    &qcom->vbus_nb);
+	if (ret < 0) {
+		dev_err(dev, "VBUS notifier register failed\n");
+		return ret;
+	}
+
+	if (qcom->host_edev)
+		host_edev = qcom->host_edev;
+	else
+		host_edev = qcom->edev;
+
+	qcom->host_nb.notifier_call = dwc3_qcom_host_notifier;
+	ret = devm_extcon_register_notifier(dev, host_edev, EXTCON_USB_HOST,
+					    &qcom->host_nb);
+	if (ret < 0) {
+		dev_err(dev, "Host notifier register failed\n");
+		return ret;
+	}
+
+	/* Update initial VBUS override based on extcon state */
+	if (extcon_get_state(qcom->edev, EXTCON_USB) ||
+	    !extcon_get_state(host_edev, EXTCON_USB_HOST))
+		dwc3_qcom_vbus_notifier(&qcom->vbus_nb, true, qcom->edev);
+	else
+		dwc3_qcom_vbus_notifier(&qcom->vbus_nb, false, qcom->edev);
+
+	return 0;
+}
+
+static int dwc3_qcom_interconnect_enable(struct dwc3_qcom *qcom)
+{
+	int ret;
+
+	ret = icc_enable(qcom->icc_path_ddr);
+	if (ret)
+		return ret;
+
+	ret = icc_enable(qcom->icc_path_apps);
+	if (ret)
+		icc_disable(qcom->icc_path_ddr);
+
+	return ret;
+}
+
+static int dwc3_qcom_interconnect_disable(struct dwc3_qcom *qcom)
+{
+	int ret;
+
+	ret = icc_disable(qcom->icc_path_ddr);
+	if (ret)
+		return ret;
+
+	ret = icc_disable(qcom->icc_path_apps);
+	if (ret)
+		icc_enable(qcom->icc_path_ddr);
+
+	return ret;
+}
+
+/**
+ * dwc3_qcom_interconnect_init() - Get interconnect path handles
+ * and set bandwidth.
+ * @qcom:			Pointer to the concerned usb core.
+ *
+ */
+static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
+{
+	enum usb_device_speed max_speed;
+	struct device *dev = qcom->dev;
+	int ret;
+
+	if (has_acpi_companion(dev))
+		return 0;
+
+	qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr");
+	if (IS_ERR(qcom->icc_path_ddr)) {
+		dev_err(dev, "failed to get usb-ddr path: %ld\n",
+				PTR_ERR(qcom->icc_path_ddr));
+		return PTR_ERR(qcom->icc_path_ddr);
+	}
+
+	qcom->icc_path_apps = of_icc_get(dev, "apps-usb");
+	if (IS_ERR(qcom->icc_path_apps)) {
+		dev_err(dev, "failed to get apps-usb path: %ld\n",
+				PTR_ERR(qcom->icc_path_apps));
+		ret = PTR_ERR(qcom->icc_path_apps);
+		goto put_path_ddr;
+	}
+
+	max_speed = usb_get_maximum_speed(&qcom->dwc3->dev);
+	if (max_speed >= USB_SPEED_SUPER || max_speed == USB_SPEED_UNKNOWN) {
+		ret = icc_set_bw(qcom->icc_path_ddr,
+				USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW);
+	} else {
+		ret = icc_set_bw(qcom->icc_path_ddr,
+				USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW);
+	}
+	if (ret) {
+		dev_err(dev, "failed to set bandwidth for usb-ddr path: %d\n", ret);
+		goto put_path_apps;
+	}
+
+	ret = icc_set_bw(qcom->icc_path_apps, APPS_USB_AVG_BW, APPS_USB_PEAK_BW);
+	if (ret) {
+		dev_err(dev, "failed to set bandwidth for apps-usb path: %d\n", ret);
+		goto put_path_apps;
+	}
+
+	return 0;
+
+put_path_apps:
+	icc_put(qcom->icc_path_apps);
+put_path_ddr:
+	icc_put(qcom->icc_path_ddr);
+	return ret;
+}
+
+/**
+ * dwc3_qcom_interconnect_exit() - Release interconnect path handles
+ * @qcom:			Pointer to the concerned usb core.
+ *
+ * This function is used to release interconnect path handle.
+ */
+static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
+{
+	icc_put(qcom->icc_path_ddr);
+	icc_put(qcom->icc_path_apps);
+}
+
+/* Only usable in contexts where the role can not change. */
+static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom)
+{
+	struct dwc3 *dwc;
+
+	/*
+	 * FIXME: Fix this layering violation.
+	 */
+	dwc = platform_get_drvdata(qcom->dwc3);
+
+	/* Core driver may not have probed yet. */
+	if (!dwc)
+		return false;
+
+	return dwc->xhci;
+}
+
+static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
+{
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+	struct usb_device *udev;
+	struct usb_hcd __maybe_unused *hcd;
+
+	/*
+	 * FIXME: Fix this layering violation.
+	 */
+	hcd = platform_get_drvdata(dwc->xhci);
+
+	/*
+	 * It is possible to query the speed of all children of
+	 * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code
+	 * currently supports only 1 port per controller. So
+	 * this is sufficient.
+	 */
+#ifdef CONFIG_USB
+	udev = usb_hub_find_child(hcd->self.root_hub, 1);
+#else
+	udev = NULL;
+#endif
+	if (!udev)
+		return USB_SPEED_UNKNOWN;
+
+	return udev->speed;
+}
+
+static void dwc3_qcom_enable_wakeup_irq(int irq, unsigned int polarity)
+{
+	if (!irq)
+		return;
+
+	if (polarity)
+		irq_set_irq_type(irq, polarity);
+
+	enable_irq(irq);
+	enable_irq_wake(irq);
+}
+
+static void dwc3_qcom_disable_wakeup_irq(int irq)
+{
+	if (!irq)
+		return;
+
+	disable_irq_wake(irq);
+	disable_irq_nosync(irq);
+}
+
+static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
+{
+	dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
+
+	if (qcom->usb2_speed == USB_SPEED_LOW) {
+		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
+			(qcom->usb2_speed == USB_SPEED_FULL)) {
+		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+	} else {
+		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+	}
+
+	dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
+}
+
+static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
+{
+	dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq, 0);
+
+	/*
+	 * Configure DP/DM line interrupts based on the USB2 device attached to
+	 * the root hub port. When HS/FS device is connected, configure the DP line
+	 * as falling edge to detect both disconnect and remote wakeup scenarios. When
+	 * LS device is connected, configure DM line as falling edge to detect both
+	 * disconnect and remote wakeup. When no device is connected, configure both
+	 * DP and DM lines as rising edge to detect HS/HS/LS device connect scenario.
+	 */
+
+	if (qcom->usb2_speed == USB_SPEED_LOW) {
+		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
+						IRQ_TYPE_EDGE_FALLING);
+	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
+			(qcom->usb2_speed == USB_SPEED_FULL)) {
+		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
+						IRQ_TYPE_EDGE_FALLING);
+	} else {
+		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
+						IRQ_TYPE_EDGE_RISING);
+		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
+						IRQ_TYPE_EDGE_RISING);
+	}
+
+	dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq, 0);
+}
+
+static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
+{
+	u32 val;
+	int i, ret;
+
+	if (qcom->is_suspended)
+		return 0;
+
+	val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
+	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
+		dev_err(qcom->dev, "HS-PHY not in L2\n");
+
+	for (i = qcom->num_clocks - 1; i >= 0; i--)
+		clk_disable_unprepare(qcom->clks[i]);
+
+	ret = dwc3_qcom_interconnect_disable(qcom);
+	if (ret)
+		dev_warn(qcom->dev, "failed to disable interconnect: %d\n", ret);
+
+	/*
+	 * The role is stable during suspend as role switching is done from a
+	 * freezable workqueue.
+	 */
+	if (dwc3_qcom_is_host(qcom) && wakeup) {
+		qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom);
+		dwc3_qcom_enable_interrupts(qcom);
+	}
+
+	qcom->is_suspended = true;
+
+	return 0;
+}
+
+static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
+{
+	int ret;
+	int i;
+
+	if (!qcom->is_suspended)
+		return 0;
+
+	if (dwc3_qcom_is_host(qcom) && wakeup)
+		dwc3_qcom_disable_interrupts(qcom);
+
+	for (i = 0; i < qcom->num_clocks; i++) {
+		ret = clk_prepare_enable(qcom->clks[i]);
+		if (ret < 0) {
+			while (--i >= 0)
+				clk_disable_unprepare(qcom->clks[i]);
+			return ret;
+		}
+	}
+
+	ret = dwc3_qcom_interconnect_enable(qcom);
+	if (ret)
+		dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
+
+	/* Clear existing events from PHY related to L2 in/out */
+	dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
+			  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
+
+	qcom->is_suspended = false;
+
+	return 0;
+}
+
+static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data)
+{
+	struct dwc3_qcom *qcom = data;
+	struct dwc3	*dwc = platform_get_drvdata(qcom->dwc3);
+
+	/* If pm_suspended then let pm_resume take care of resuming h/w */
+	if (qcom->pm_suspended)
+		return IRQ_HANDLED;
+
+	/*
+	 * This is safe as role switching is done from a freezable workqueue
+	 * and the wakeup interrupts are disabled as part of resume.
+	 */
+	if (dwc3_qcom_is_host(qcom))
+		pm_runtime_resume(&dwc->xhci->dev);
+
+	return IRQ_HANDLED;
+}
+
+static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom)
+{
+	/* Configure dwc3 to use UTMI clock as PIPE clock not present */
+	dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
+			  PIPE_UTMI_CLK_DIS);
+
+	usleep_range(100, 1000);
+
+	dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
+			  PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW);
+
+	usleep_range(100, 1000);
+
+	dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG,
+			  PIPE_UTMI_CLK_DIS);
+}
+
+static int dwc3_qcom_get_irq(struct platform_device *pdev,
+			     const char *name, int num)
+{
+	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+	struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb : pdev;
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (np)
+		ret = platform_get_irq_byname_optional(pdev_irq, name);
+	else
+		ret = platform_get_irq_optional(pdev_irq, num);
+
+	return ret;
+}
+
+static int dwc3_qcom_setup_irq(struct platform_device *pdev)
+{
+	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+	const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
+	int irq;
+	int ret;
+
+	irq = dwc3_qcom_get_irq(pdev, "hs_phy_irq",
+				pdata ? pdata->hs_phy_irq_index : -1);
+	if (irq > 0) {
+		/* Keep wakeup interrupts disabled until suspend */
+		irq_set_status_flags(irq, IRQ_NOAUTOEN);
+		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+					qcom_dwc3_resume_irq,
+					IRQF_ONESHOT,
+					"qcom_dwc3 HS", qcom);
+		if (ret) {
+			dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret);
+			return ret;
+		}
+		qcom->hs_phy_irq = irq;
+	}
+
+	irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq",
+				pdata ? pdata->dp_hs_phy_irq_index : -1);
+	if (irq > 0) {
+		irq_set_status_flags(irq, IRQ_NOAUTOEN);
+		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+					qcom_dwc3_resume_irq,
+					IRQF_ONESHOT,
+					"qcom_dwc3 DP_HS", qcom);
+		if (ret) {
+			dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret);
+			return ret;
+		}
+		qcom->dp_hs_phy_irq = irq;
+	}
+
+	irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq",
+				pdata ? pdata->dm_hs_phy_irq_index : -1);
+	if (irq > 0) {
+		irq_set_status_flags(irq, IRQ_NOAUTOEN);
+		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+					qcom_dwc3_resume_irq,
+					IRQF_ONESHOT,
+					"qcom_dwc3 DM_HS", qcom);
+		if (ret) {
+			dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret);
+			return ret;
+		}
+		qcom->dm_hs_phy_irq = irq;
+	}
+
+	irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq",
+				pdata ? pdata->ss_phy_irq_index : -1);
+	if (irq > 0) {
+		irq_set_status_flags(irq, IRQ_NOAUTOEN);
+		ret = devm_request_threaded_irq(qcom->dev, irq, NULL,
+					qcom_dwc3_resume_irq,
+					IRQF_ONESHOT,
+					"qcom_dwc3 SS", qcom);
+		if (ret) {
+			dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret);
+			return ret;
+		}
+		qcom->ss_phy_irq = irq;
+	}
+
+	return 0;
+}
+
+static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
+{
+	struct device		*dev = qcom->dev;
+	struct device_node	*np = dev->of_node;
+	int			i;
+
+	if (!np || !count)
+		return 0;
+
+	if (count < 0)
+		return count;
+
+	qcom->num_clocks = count;
+
+	qcom->clks = devm_kcalloc(dev, qcom->num_clocks,
+				  sizeof(struct clk *), GFP_KERNEL);
+	if (!qcom->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < qcom->num_clocks; i++) {
+		struct clk	*clk;
+		int		ret;
+
+		clk = of_clk_get(np, i);
+		if (IS_ERR(clk)) {
+			while (--i >= 0)
+				clk_put(qcom->clks[i]);
+			return PTR_ERR(clk);
+		}
+
+		ret = clk_prepare_enable(clk);
+		if (ret < 0) {
+			while (--i >= 0) {
+				clk_disable_unprepare(qcom->clks[i]);
+				clk_put(qcom->clks[i]);
+			}
+			clk_put(clk);
+
+			return ret;
+		}
+
+		qcom->clks[i] = clk;
+	}
+
+	return 0;
+}
+
+static const struct property_entry dwc3_qcom_acpi_properties[] = {
+	PROPERTY_ENTRY_STRING("dr_mode", "host"),
+	{}
+};
+
+static const struct software_node dwc3_qcom_swnode = {
+	.properties = dwc3_qcom_acpi_properties,
+};
+
+static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
+{
+	struct dwc3_qcom	*qcom = platform_get_drvdata(pdev);
+	struct device		*dev = &pdev->dev;
+	struct resource		*res, *child_res = NULL;
+	struct platform_device	*pdev_irq = qcom->urs_usb ? qcom->urs_usb :
+							    pdev;
+	int			irq;
+	int			ret;
+
+	qcom->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
+	if (!qcom->dwc3)
+		return -ENOMEM;
+
+	qcom->dwc3->dev.parent = dev;
+	qcom->dwc3->dev.type = dev->type;
+	qcom->dwc3->dev.dma_mask = dev->dma_mask;
+	qcom->dwc3->dev.dma_parms = dev->dma_parms;
+	qcom->dwc3->dev.coherent_dma_mask = dev->coherent_dma_mask;
+
+	child_res = kcalloc(2, sizeof(*child_res), GFP_KERNEL);
+	if (!child_res) {
+		platform_device_put(qcom->dwc3);
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get memory resource\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	child_res[0].flags = res->flags;
+	child_res[0].start = res->start;
+	child_res[0].end = child_res[0].start +
+		qcom->acpi_pdata->dwc3_core_base_size;
+
+	irq = platform_get_irq(pdev_irq, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto out;
+	}
+	child_res[1].flags = IORESOURCE_IRQ;
+	child_res[1].start = child_res[1].end = irq;
+
+	ret = platform_device_add_resources(qcom->dwc3, child_res, 2);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto out;
+	}
+
+	ret = device_add_software_node(&qcom->dwc3->dev, &dwc3_qcom_swnode);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add properties\n");
+		goto out;
+	}
+
+	ret = platform_device_add(qcom->dwc3);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add device\n");
+		device_remove_software_node(&qcom->dwc3->dev);
+		goto out;
+	}
+	kfree(child_res);
+	return 0;
+
+out:
+	platform_device_put(qcom->dwc3);
+	kfree(child_res);
+	return ret;
+}
+
+static int dwc3_qcom_of_register_core(struct platform_device *pdev)
+{
+	struct dwc3_qcom	*qcom = platform_get_drvdata(pdev);
+	struct device_node	*np = pdev->dev.of_node, *dwc3_np;
+	struct device		*dev = &pdev->dev;
+	int			ret;
+
+	dwc3_np = of_get_compatible_child(np, "snps,dwc3");
+	if (!dwc3_np) {
+		dev_err(dev, "failed to find dwc3 core child\n");
+		return -ENODEV;
+	}
+
+	ret = of_platform_populate(np, NULL, NULL, dev);
+	if (ret) {
+		dev_err(dev, "failed to register dwc3 core - %d\n", ret);
+		goto node_put;
+	}
+
+	qcom->dwc3 = of_find_device_by_node(dwc3_np);
+	if (!qcom->dwc3) {
+		ret = -ENODEV;
+		dev_err(dev, "failed to get dwc3 platform device\n");
+		of_platform_depopulate(dev);
+	}
+
+node_put:
+	of_node_put(dwc3_np);
+
+	return ret;
+}
+
+static struct platform_device *dwc3_qcom_create_urs_usb_platdev(struct device *dev)
+{
+	struct platform_device *urs_usb = NULL;
+	struct fwnode_handle *fwh;
+	struct acpi_device *adev;
+	char name[8];
+	int ret;
+	int id;
+
+	/* Figure out device id */
+	ret = sscanf(fwnode_get_name(dev->fwnode), "URS%d", &id);
+	if (!ret)
+		return NULL;
+
+	/* Find the child using name */
+	snprintf(name, sizeof(name), "USB%d", id);
+	fwh = fwnode_get_named_child_node(dev->fwnode, name);
+	if (!fwh)
+		return NULL;
+
+	adev = to_acpi_device_node(fwh);
+	if (!adev)
+		goto err_put_handle;
+
+	urs_usb = acpi_create_platform_device(adev, NULL);
+	if (IS_ERR_OR_NULL(urs_usb))
+		goto err_put_handle;
+
+	return urs_usb;
+
+err_put_handle:
+	fwnode_handle_put(fwh);
+
+	return urs_usb;
+}
+
+static void dwc3_qcom_destroy_urs_usb_platdev(struct platform_device *urs_usb)
+{
+	struct fwnode_handle *fwh = urs_usb->dev.fwnode;
+
+	platform_device_unregister(urs_usb);
+	fwnode_handle_put(fwh);
+}
+
+static int dwc3_qcom_probe(struct platform_device *pdev)
+{
+	struct device_node	*np = pdev->dev.of_node;
+	struct device		*dev = &pdev->dev;
+	struct dwc3_qcom	*qcom;
+	struct resource		*res, *parent_res = NULL;
+	struct resource		local_res;
+	int			ret, i;
+	bool			ignore_pipe_clk;
+	bool			wakeup_source;
+
+	qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL);
+	if (!qcom)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, qcom);
+	qcom->dev = &pdev->dev;
+
+	if (has_acpi_companion(dev)) {
+		qcom->acpi_pdata = acpi_device_get_match_data(dev);
+		if (!qcom->acpi_pdata) {
+			dev_err(&pdev->dev, "no supporting ACPI device data\n");
+			return -EINVAL;
+		}
+	}
+
+	qcom->resets = devm_reset_control_array_get_optional_exclusive(dev);
+	if (IS_ERR(qcom->resets)) {
+		ret = PTR_ERR(qcom->resets);
+		dev_err(&pdev->dev, "failed to get resets, err=%d\n", ret);
+		return ret;
+	}
+
+	ret = reset_control_assert(qcom->resets);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to assert resets, err=%d\n", ret);
+		return ret;
+	}
+
+	usleep_range(10, 1000);
+
+	ret = reset_control_deassert(qcom->resets);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to deassert resets, err=%d\n", ret);
+		goto reset_assert;
+	}
+
+	ret = dwc3_qcom_clk_init(qcom, of_clk_get_parent_count(np));
+	if (ret) {
+		dev_err(dev, "failed to get clocks\n");
+		goto reset_assert;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (np) {
+		parent_res = res;
+	} else {
+		memcpy(&local_res, res, sizeof(struct resource));
+		parent_res = &local_res;
+
+		parent_res->start = res->start +
+			qcom->acpi_pdata->qscratch_base_offset;
+		parent_res->end = parent_res->start +
+			qcom->acpi_pdata->qscratch_base_size;
+
+		if (qcom->acpi_pdata->is_urs) {
+			qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev);
+			if (IS_ERR_OR_NULL(qcom->urs_usb)) {
+				dev_err(dev, "failed to create URS USB platdev\n");
+				if (!qcom->urs_usb)
+					ret = -ENODEV;
+				else
+					ret = PTR_ERR(qcom->urs_usb);
+				goto clk_disable;
+			}
+		}
+	}
+
+	qcom->qscratch_base = devm_ioremap_resource(dev, parent_res);
+	if (IS_ERR(qcom->qscratch_base)) {
+		ret = PTR_ERR(qcom->qscratch_base);
+		goto free_urs;
+	}
+
+	ret = dwc3_qcom_setup_irq(pdev);
+	if (ret) {
+		dev_err(dev, "failed to setup IRQs, err=%d\n", ret);
+		goto free_urs;
+	}
+
+	/*
+	 * Disable pipe_clk requirement if specified. Used when dwc3
+	 * operates without SSPHY and only HS/FS/LS modes are supported.
+	 */
+	ignore_pipe_clk = device_property_read_bool(dev,
+				"qcom,select-utmi-as-pipe-clk");
+	if (ignore_pipe_clk)
+		dwc3_qcom_select_utmi_clk(qcom);
+
+	if (np)
+		ret = dwc3_qcom_of_register_core(pdev);
+	else
+		ret = dwc3_qcom_acpi_register_core(pdev);
+
+	if (ret) {
+		dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret);
+		goto free_urs;
+	}
+
+	ret = dwc3_qcom_interconnect_init(qcom);
+	if (ret)
+		goto depopulate;
+
+	qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev);
+
+	/* enable vbus override for device mode */
+	if (qcom->mode != USB_DR_MODE_HOST)
+		dwc3_qcom_vbus_override_enable(qcom, true);
+
+	/* register extcon to override sw_vbus on Vbus change later */
+	ret = dwc3_qcom_register_extcon(qcom);
+	if (ret)
+		goto interconnect_exit;
+
+	wakeup_source = of_property_read_bool(dev->of_node, "wakeup-source");
+	device_init_wakeup(&pdev->dev, wakeup_source);
+	device_init_wakeup(&qcom->dwc3->dev, wakeup_source);
+
+	qcom->is_suspended = false;
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_forbid(dev);
+
+	return 0;
+
+interconnect_exit:
+	dwc3_qcom_interconnect_exit(qcom);
+depopulate:
+	if (np) {
+		of_platform_depopulate(&pdev->dev);
+	} else {
+		device_remove_software_node(&qcom->dwc3->dev);
+		platform_device_del(qcom->dwc3);
+	}
+	platform_device_put(qcom->dwc3);
+free_urs:
+	if (qcom->urs_usb)
+		dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb);
+clk_disable:
+	for (i = qcom->num_clocks - 1; i >= 0; i--) {
+		clk_disable_unprepare(qcom->clks[i]);
+		clk_put(qcom->clks[i]);
+	}
+reset_assert:
+	reset_control_assert(qcom->resets);
+
+	return ret;
+}
+
+static int dwc3_qcom_remove(struct platform_device *pdev)
+{
+	struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	int i;
+
+	if (np) {
+		of_platform_depopulate(&pdev->dev);
+	} else {
+		device_remove_software_node(&qcom->dwc3->dev);
+		platform_device_del(qcom->dwc3);
+	}
+	platform_device_put(qcom->dwc3);
+
+	if (qcom->urs_usb)
+		dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb);
+
+	for (i = qcom->num_clocks - 1; i >= 0; i--) {
+		clk_disable_unprepare(qcom->clks[i]);
+		clk_put(qcom->clks[i]);
+	}
+	qcom->num_clocks = 0;
+
+	dwc3_qcom_interconnect_exit(qcom);
+	reset_control_assert(qcom->resets);
+
+	pm_runtime_allow(dev);
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_qcom_pm_suspend(struct device *dev)
+{
+	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
+	bool wakeup = device_may_wakeup(dev);
+	int ret;
+
+	ret = dwc3_qcom_suspend(qcom, wakeup);
+	if (ret)
+		return ret;
+
+	qcom->pm_suspended = true;
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_qcom_pm_resume(struct device *dev)
+{
+	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
+	bool wakeup = device_may_wakeup(dev);
+	int ret;
+
+	ret = dwc3_qcom_resume(qcom, wakeup);
+	if (ret)
+		return ret;
+
+	qcom->pm_suspended = false;
+
+	return 0;
+}
+
+static int __maybe_unused dwc3_qcom_runtime_suspend(struct device *dev)
+{
+	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
+
+	return dwc3_qcom_suspend(qcom, true);
+}
+
+static int __maybe_unused dwc3_qcom_runtime_resume(struct device *dev)
+{
+	struct dwc3_qcom *qcom = dev_get_drvdata(dev);
+
+	return dwc3_qcom_resume(qcom, true);
+}
+
+static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_qcom_pm_suspend, dwc3_qcom_pm_resume)
+	SET_RUNTIME_PM_OPS(dwc3_qcom_runtime_suspend, dwc3_qcom_runtime_resume,
+			   NULL)
+};
+
+static const struct of_device_id dwc3_qcom_of_match[] = {
+	{ .compatible = "qcom,dwc3" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct dwc3_acpi_pdata sdm845_acpi_pdata = {
+	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
+	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
+	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
+	.hs_phy_irq_index = 1,
+	.dp_hs_phy_irq_index = 4,
+	.dm_hs_phy_irq_index = 3,
+	.ss_phy_irq_index = 2
+};
+
+static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
+	.qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET,
+	.qscratch_base_size = SDM845_QSCRATCH_SIZE,
+	.dwc3_core_base_size = SDM845_DWC3_CORE_SIZE,
+	.hs_phy_irq_index = 1,
+	.dp_hs_phy_irq_index = 4,
+	.dm_hs_phy_irq_index = 3,
+	.ss_phy_irq_index = 2,
+	.is_urs = true,
+};
+
+static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
+	{ "QCOM2430", (unsigned long)&sdm845_acpi_pdata },
+	{ "QCOM0304", (unsigned long)&sdm845_acpi_urs_pdata },
+	{ "QCOM0497", (unsigned long)&sdm845_acpi_urs_pdata },
+	{ "QCOM04A6", (unsigned long)&sdm845_acpi_pdata },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match);
+#endif
+
+static struct platform_driver dwc3_qcom_driver = {
+	.probe		= dwc3_qcom_probe,
+	.remove		= dwc3_qcom_remove,
+	.driver		= {
+		.name	= "dwc3-qcom",
+		.pm	= &dwc3_qcom_dev_pm_ops,
+		.of_match_table	= dwc3_qcom_of_match,
+		.acpi_match_table = ACPI_PTR(dwc3_qcom_acpi_match),
+	},
+};
+
+module_platform_driver(dwc3_qcom_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare DWC3 QCOM Glue Driver");