Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3163 insertions, 0 deletions

diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
new file mode 100644
index 000000000..4f8617210
--- /dev/null
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -0,0 +1,3163 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/irq.h>
+
+#define PCH_VBUS_PERIOD		3000	/* VBUS polling period (msec) */
+#define PCH_VBUS_INTERVAL	10	/* VBUS polling interval (msec) */
+
+/* Address offset of Registers */
+#define UDC_EP_REG_SHIFT	0x20	/* Offset to next EP */
+
+#define UDC_EPCTL_ADDR		0x00	/* Endpoint control */
+#define UDC_EPSTS_ADDR		0x04	/* Endpoint status */
+#define UDC_BUFIN_FRAMENUM_ADDR	0x08	/* buffer size in / frame number out */
+#define UDC_BUFOUT_MAXPKT_ADDR	0x0C	/* buffer size out / maxpkt in */
+#define UDC_SUBPTR_ADDR		0x10	/* setup buffer pointer */
+#define UDC_DESPTR_ADDR		0x14	/* Data descriptor pointer */
+#define UDC_CONFIRM_ADDR	0x18	/* Write/Read confirmation */
+
+#define UDC_DEVCFG_ADDR		0x400	/* Device configuration */
+#define UDC_DEVCTL_ADDR		0x404	/* Device control */
+#define UDC_DEVSTS_ADDR		0x408	/* Device status */
+#define UDC_DEVIRQSTS_ADDR	0x40C	/* Device irq status */
+#define UDC_DEVIRQMSK_ADDR	0x410	/* Device irq mask */
+#define UDC_EPIRQSTS_ADDR	0x414	/* Endpoint irq status */
+#define UDC_EPIRQMSK_ADDR	0x418	/* Endpoint irq mask */
+#define UDC_DEVLPM_ADDR		0x41C	/* LPM control / status */
+#define UDC_CSR_BUSY_ADDR	0x4f0	/* UDC_CSR_BUSY Status register */
+#define UDC_SRST_ADDR		0x4fc	/* SOFT RESET register */
+#define UDC_CSR_ADDR		0x500	/* USB_DEVICE endpoint register */
+
+/* Endpoint control register */
+/* Bit position */
+#define UDC_EPCTL_MRXFLUSH		(1 << 12)
+#define UDC_EPCTL_RRDY			(1 << 9)
+#define UDC_EPCTL_CNAK			(1 << 8)
+#define UDC_EPCTL_SNAK			(1 << 7)
+#define UDC_EPCTL_NAK			(1 << 6)
+#define UDC_EPCTL_P			(1 << 3)
+#define UDC_EPCTL_F			(1 << 1)
+#define UDC_EPCTL_S			(1 << 0)
+#define UDC_EPCTL_ET_SHIFT		4
+/* Mask patern */
+#define UDC_EPCTL_ET_MASK		0x00000030
+/* Value for ET field */
+#define UDC_EPCTL_ET_CONTROL		0
+#define UDC_EPCTL_ET_ISO		1
+#define UDC_EPCTL_ET_BULK		2
+#define UDC_EPCTL_ET_INTERRUPT		3
+
+/* Endpoint status register */
+/* Bit position */
+#define UDC_EPSTS_XFERDONE		(1 << 27)
+#define UDC_EPSTS_RSS			(1 << 26)
+#define UDC_EPSTS_RCS			(1 << 25)
+#define UDC_EPSTS_TXEMPTY		(1 << 24)
+#define UDC_EPSTS_TDC			(1 << 10)
+#define UDC_EPSTS_HE			(1 << 9)
+#define UDC_EPSTS_MRXFIFO_EMP		(1 << 8)
+#define UDC_EPSTS_BNA			(1 << 7)
+#define UDC_EPSTS_IN			(1 << 6)
+#define UDC_EPSTS_OUT_SHIFT		4
+/* Mask patern */
+#define UDC_EPSTS_OUT_MASK		0x00000030
+#define UDC_EPSTS_ALL_CLR_MASK		0x1F0006F0
+/* Value for OUT field */
+#define UDC_EPSTS_OUT_SETUP		2
+#define UDC_EPSTS_OUT_DATA		1
+
+/* Device configuration register */
+/* Bit position */
+#define UDC_DEVCFG_CSR_PRG		(1 << 17)
+#define UDC_DEVCFG_SP			(1 << 3)
+/* SPD Valee */
+#define UDC_DEVCFG_SPD_HS		0x0
+#define UDC_DEVCFG_SPD_FS		0x1
+#define UDC_DEVCFG_SPD_LS		0x2
+
+/* Device control register */
+/* Bit position */
+#define UDC_DEVCTL_THLEN_SHIFT		24
+#define UDC_DEVCTL_BRLEN_SHIFT		16
+#define UDC_DEVCTL_CSR_DONE		(1 << 13)
+#define UDC_DEVCTL_SD			(1 << 10)
+#define UDC_DEVCTL_MODE			(1 << 9)
+#define UDC_DEVCTL_BREN			(1 << 8)
+#define UDC_DEVCTL_THE			(1 << 7)
+#define UDC_DEVCTL_DU			(1 << 4)
+#define UDC_DEVCTL_TDE			(1 << 3)
+#define UDC_DEVCTL_RDE			(1 << 2)
+#define UDC_DEVCTL_RES			(1 << 0)
+
+/* Device status register */
+/* Bit position */
+#define UDC_DEVSTS_TS_SHIFT		18
+#define UDC_DEVSTS_ENUM_SPEED_SHIFT	13
+#define UDC_DEVSTS_ALT_SHIFT		8
+#define UDC_DEVSTS_INTF_SHIFT		4
+#define UDC_DEVSTS_CFG_SHIFT		0
+/* Mask patern */
+#define UDC_DEVSTS_TS_MASK		0xfffc0000
+#define UDC_DEVSTS_ENUM_SPEED_MASK	0x00006000
+#define UDC_DEVSTS_ALT_MASK		0x00000f00
+#define UDC_DEVSTS_INTF_MASK		0x000000f0
+#define UDC_DEVSTS_CFG_MASK		0x0000000f
+/* value for maximum speed for SPEED field */
+#define UDC_DEVSTS_ENUM_SPEED_FULL	1
+#define UDC_DEVSTS_ENUM_SPEED_HIGH	0
+#define UDC_DEVSTS_ENUM_SPEED_LOW	2
+#define UDC_DEVSTS_ENUM_SPEED_FULLX	3
+
+/* Device irq register */
+/* Bit position */
+#define UDC_DEVINT_RWKP			(1 << 7)
+#define UDC_DEVINT_ENUM			(1 << 6)
+#define UDC_DEVINT_SOF			(1 << 5)
+#define UDC_DEVINT_US			(1 << 4)
+#define UDC_DEVINT_UR			(1 << 3)
+#define UDC_DEVINT_ES			(1 << 2)
+#define UDC_DEVINT_SI			(1 << 1)
+#define UDC_DEVINT_SC			(1 << 0)
+/* Mask patern */
+#define UDC_DEVINT_MSK			0x7f
+
+/* Endpoint irq register */
+/* Bit position */
+#define UDC_EPINT_IN_SHIFT		0
+#define UDC_EPINT_OUT_SHIFT		16
+#define UDC_EPINT_IN_EP0		(1 << 0)
+#define UDC_EPINT_OUT_EP0		(1 << 16)
+/* Mask patern */
+#define UDC_EPINT_MSK_DISABLE_ALL	0xffffffff
+
+/* UDC_CSR_BUSY Status register */
+/* Bit position */
+#define UDC_CSR_BUSY			(1 << 0)
+
+/* SOFT RESET register */
+/* Bit position */
+#define UDC_PSRST			(1 << 1)
+#define UDC_SRST			(1 << 0)
+
+/* USB_DEVICE endpoint register */
+/* Bit position */
+#define UDC_CSR_NE_NUM_SHIFT		0
+#define UDC_CSR_NE_DIR_SHIFT		4
+#define UDC_CSR_NE_TYPE_SHIFT		5
+#define UDC_CSR_NE_CFG_SHIFT		7
+#define UDC_CSR_NE_INTF_SHIFT		11
+#define UDC_CSR_NE_ALT_SHIFT		15
+#define UDC_CSR_NE_MAX_PKT_SHIFT	19
+/* Mask patern */
+#define UDC_CSR_NE_NUM_MASK		0x0000000f
+#define UDC_CSR_NE_DIR_MASK		0x00000010
+#define UDC_CSR_NE_TYPE_MASK		0x00000060
+#define UDC_CSR_NE_CFG_MASK		0x00000780
+#define UDC_CSR_NE_INTF_MASK		0x00007800
+#define UDC_CSR_NE_ALT_MASK		0x00078000
+#define UDC_CSR_NE_MAX_PKT_MASK		0x3ff80000
+
+#define PCH_UDC_CSR(ep)	(UDC_CSR_ADDR + ep*4)
+#define PCH_UDC_EPINT(in, num)\
+		(1 << (num + (in ? UDC_EPINT_IN_SHIFT : UDC_EPINT_OUT_SHIFT)))
+
+/* Index of endpoint */
+#define UDC_EP0IN_IDX		0
+#define UDC_EP0OUT_IDX		1
+#define UDC_EPIN_IDX(ep)	(ep * 2)
+#define UDC_EPOUT_IDX(ep)	(ep * 2 + 1)
+#define PCH_UDC_EP0		0
+#define PCH_UDC_EP1		1
+#define PCH_UDC_EP2		2
+#define PCH_UDC_EP3		3
+
+/* Number of endpoint */
+#define PCH_UDC_EP_NUM		32	/* Total number of EPs (16 IN,16 OUT) */
+#define PCH_UDC_USED_EP_NUM	4	/* EP number of EP's really used */
+/* Length Value */
+#define PCH_UDC_BRLEN		0x0F	/* Burst length */
+#define PCH_UDC_THLEN		0x1F	/* Threshold length */
+/* Value of EP Buffer Size */
+#define UDC_EP0IN_BUFF_SIZE	16
+#define UDC_EPIN_BUFF_SIZE	256
+#define UDC_EP0OUT_BUFF_SIZE	16
+#define UDC_EPOUT_BUFF_SIZE	256
+/* Value of EP maximum packet size */
+#define UDC_EP0IN_MAX_PKT_SIZE	64
+#define UDC_EP0OUT_MAX_PKT_SIZE	64
+#define UDC_BULK_MAX_PKT_SIZE	512
+
+/* DMA */
+#define DMA_DIR_RX		1	/* DMA for data receive */
+#define DMA_DIR_TX		2	/* DMA for data transmit */
+#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
+#define UDC_DMA_MAXPACKET	65536	/* maximum packet size for DMA */
+
+/**
+ * struct pch_udc_data_dma_desc - Structure to hold DMA descriptor information
+ *				  for data
+ * @status:		Status quadlet
+ * @reserved:		Reserved
+ * @dataptr:		Buffer descriptor
+ * @next:		Next descriptor
+ */
+struct pch_udc_data_dma_desc {
+	u32 status;
+	u32 reserved;
+	u32 dataptr;
+	u32 next;
+};
+
+/**
+ * struct pch_udc_stp_dma_desc - Structure to hold DMA descriptor information
+ *				 for control data
+ * @status:	Status
+ * @reserved:	Reserved
+ * @request:	Control Request
+ */
+struct pch_udc_stp_dma_desc {
+	u32 status;
+	u32 reserved;
+	struct usb_ctrlrequest request;
+} __attribute((packed));
+
+/* DMA status definitions */
+/* Buffer status */
+#define PCH_UDC_BUFF_STS	0xC0000000
+#define PCH_UDC_BS_HST_RDY	0x00000000
+#define PCH_UDC_BS_DMA_BSY	0x40000000
+#define PCH_UDC_BS_DMA_DONE	0x80000000
+#define PCH_UDC_BS_HST_BSY	0xC0000000
+/*  Rx/Tx Status */
+#define PCH_UDC_RXTX_STS	0x30000000
+#define PCH_UDC_RTS_SUCC	0x00000000
+#define PCH_UDC_RTS_DESERR	0x10000000
+#define PCH_UDC_RTS_BUFERR	0x30000000
+/* Last Descriptor Indication */
+#define PCH_UDC_DMA_LAST	0x08000000
+/* Number of Rx/Tx Bytes Mask */
+#define PCH_UDC_RXTX_BYTES	0x0000ffff
+
+/**
+ * struct pch_udc_cfg_data - Structure to hold current configuration
+ *			     and interface information
+ * @cur_cfg:	current configuration in use
+ * @cur_intf:	current interface in use
+ * @cur_alt:	current alt interface in use
+ */
+struct pch_udc_cfg_data {
+	u16 cur_cfg;
+	u16 cur_intf;
+	u16 cur_alt;
+};
+
+/**
+ * struct pch_udc_ep - Structure holding a PCH USB device Endpoint information
+ * @ep:			embedded ep request
+ * @td_stp_phys:	for setup request
+ * @td_data_phys:	for data request
+ * @td_stp:		for setup request
+ * @td_data:		for data request
+ * @dev:		reference to device struct
+ * @offset_addr:	offset address of ep register
+ * @desc:		for this ep
+ * @queue:		queue for requests
+ * @num:		endpoint number
+ * @in:			endpoint is IN
+ * @halted:		endpoint halted?
+ * @epsts:		Endpoint status
+ */
+struct pch_udc_ep {
+	struct usb_ep			ep;
+	dma_addr_t			td_stp_phys;
+	dma_addr_t			td_data_phys;
+	struct pch_udc_stp_dma_desc	*td_stp;
+	struct pch_udc_data_dma_desc	*td_data;
+	struct pch_udc_dev		*dev;
+	unsigned long			offset_addr;
+	struct list_head		queue;
+	unsigned			num:5,
+					in:1,
+					halted:1;
+	unsigned long			epsts;
+};
+
+/**
+ * struct pch_vbus_gpio_data - Structure holding GPIO informaton
+ *					for detecting VBUS
+ * @port:		gpio descriptor for the VBUS GPIO
+ * @intr:		gpio interrupt number
+ * @irq_work_fall:	Structure for WorkQueue
+ * @irq_work_rise:	Structure for WorkQueue
+ */
+struct pch_vbus_gpio_data {
+	struct gpio_desc	*port;
+	int			intr;
+	struct work_struct	irq_work_fall;
+	struct work_struct	irq_work_rise;
+};
+
+/**
+ * struct pch_udc_dev - Structure holding complete information
+ *			of the PCH USB device
+ * @gadget:		gadget driver data
+ * @driver:		reference to gadget driver bound
+ * @pdev:		reference to the PCI device
+ * @ep:			array of endpoints
+ * @lock:		protects all state
+ * @stall:		stall requested
+ * @prot_stall:		protcol stall requested
+ * @registered:		driver registered with system
+ * @suspended:		driver in suspended state
+ * @connected:		gadget driver associated
+ * @vbus_session:	required vbus_session state
+ * @set_cfg_not_acked:	pending acknowledgement 4 setup
+ * @waiting_zlp_ack:	pending acknowledgement 4 ZLP
+ * @data_requests:	DMA pool for data requests
+ * @stp_requests:	DMA pool for setup requests
+ * @dma_addr:		DMA pool for received
+ * @setup_data:		Received setup data
+ * @base_addr:		for mapped device memory
+ * @bar:		PCI BAR used for mapped device memory
+ * @cfg_data:		current cfg, intf, and alt in use
+ * @vbus_gpio:		GPIO informaton for detecting VBUS
+ */
+struct pch_udc_dev {
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	struct pci_dev			*pdev;
+	struct pch_udc_ep		ep[PCH_UDC_EP_NUM];
+	spinlock_t			lock; /* protects all state */
+	unsigned
+			stall:1,
+			prot_stall:1,
+			suspended:1,
+			connected:1,
+			vbus_session:1,
+			set_cfg_not_acked:1,
+			waiting_zlp_ack:1;
+	struct dma_pool		*data_requests;
+	struct dma_pool		*stp_requests;
+	dma_addr_t			dma_addr;
+	struct usb_ctrlrequest		setup_data;
+	void __iomem			*base_addr;
+	unsigned short			bar;
+	struct pch_udc_cfg_data		cfg_data;
+	struct pch_vbus_gpio_data	vbus_gpio;
+};
+#define to_pch_udc(g)	(container_of((g), struct pch_udc_dev, gadget))
+
+#define PCH_UDC_PCI_BAR_QUARK_X1000	0
+#define PCH_UDC_PCI_BAR			1
+
+#define PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC	0x0939
+#define PCI_DEVICE_ID_INTEL_EG20T_UDC		0x8808
+
+#define PCI_DEVICE_ID_ML7213_IOH_UDC	0x801D
+#define PCI_DEVICE_ID_ML7831_IOH_UDC	0x8808
+
+static const char	ep0_string[] = "ep0in";
+static DEFINE_SPINLOCK(udc_stall_spinlock);	/* stall spin lock */
+static bool speed_fs;
+module_param_named(speed_fs, speed_fs, bool, S_IRUGO);
+MODULE_PARM_DESC(speed_fs, "true for Full speed operation");
+
+/**
+ * struct pch_udc_request - Structure holding a PCH USB device request packet
+ * @req:		embedded ep request
+ * @td_data_phys:	phys. address
+ * @td_data:		first dma desc. of chain
+ * @td_data_last:	last dma desc. of chain
+ * @queue:		associated queue
+ * @dma_going:		DMA in progress for request
+ * @dma_done:		DMA completed for request
+ * @chain_len:		chain length
+ */
+struct pch_udc_request {
+	struct usb_request		req;
+	dma_addr_t			td_data_phys;
+	struct pch_udc_data_dma_desc	*td_data;
+	struct pch_udc_data_dma_desc	*td_data_last;
+	struct list_head		queue;
+	unsigned			dma_going:1,
+					dma_done:1;
+	unsigned			chain_len;
+};
+
+static inline u32 pch_udc_readl(struct pch_udc_dev *dev, unsigned long reg)
+{
+	return ioread32(dev->base_addr + reg);
+}
+
+static inline void pch_udc_writel(struct pch_udc_dev *dev,
+				    unsigned long val, unsigned long reg)
+{
+	iowrite32(val, dev->base_addr + reg);
+}
+
+static inline void pch_udc_bit_set(struct pch_udc_dev *dev,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_writel(dev, pch_udc_readl(dev, reg) | bitmask, reg);
+}
+
+static inline void pch_udc_bit_clr(struct pch_udc_dev *dev,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_writel(dev, pch_udc_readl(dev, reg) & ~(bitmask), reg);
+}
+
+static inline u32 pch_udc_ep_readl(struct pch_udc_ep *ep, unsigned long reg)
+{
+	return ioread32(ep->dev->base_addr + ep->offset_addr + reg);
+}
+
+static inline void pch_udc_ep_writel(struct pch_udc_ep *ep,
+				    unsigned long val, unsigned long reg)
+{
+	iowrite32(val, ep->dev->base_addr + ep->offset_addr + reg);
+}
+
+static inline void pch_udc_ep_bit_set(struct pch_udc_ep *ep,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_ep_writel(ep, pch_udc_ep_readl(ep, reg) | bitmask, reg);
+}
+
+static inline void pch_udc_ep_bit_clr(struct pch_udc_ep *ep,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_ep_writel(ep, pch_udc_ep_readl(ep, reg) & ~(bitmask), reg);
+}
+
+/**
+ * pch_udc_csr_busy() - Wait till idle.
+ * @dev:	Reference to pch_udc_dev structure
+ */
+static void pch_udc_csr_busy(struct pch_udc_dev *dev)
+{
+	unsigned int count = 200;
+
+	/* Wait till idle */
+	while ((pch_udc_readl(dev, UDC_CSR_BUSY_ADDR) & UDC_CSR_BUSY)
+		&& --count)
+		cpu_relax();
+	if (!count)
+		dev_err(&dev->pdev->dev, "%s: wait error\n", __func__);
+}
+
+/**
+ * pch_udc_write_csr() - Write the command and status registers.
+ * @dev:	Reference to pch_udc_dev structure
+ * @val:	value to be written to CSR register
+ * @ep:		end-point number
+ */
+static void pch_udc_write_csr(struct pch_udc_dev *dev, unsigned long val,
+			       unsigned int ep)
+{
+	unsigned long reg = PCH_UDC_CSR(ep);
+
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+	pch_udc_writel(dev, val, reg);
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+}
+
+/**
+ * pch_udc_read_csr() - Read the command and status registers.
+ * @dev:	Reference to pch_udc_dev structure
+ * @ep:		end-point number
+ *
+ * Return codes:	content of CSR register
+ */
+static u32 pch_udc_read_csr(struct pch_udc_dev *dev, unsigned int ep)
+{
+	unsigned long reg = PCH_UDC_CSR(ep);
+
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+	pch_udc_readl(dev, reg);	/* Dummy read */
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+	return pch_udc_readl(dev, reg);
+}
+
+/**
+ * pch_udc_rmt_wakeup() - Initiate for remote wakeup
+ * @dev:	Reference to pch_udc_dev structure
+ */
+static inline void pch_udc_rmt_wakeup(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+	mdelay(1);
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+/**
+ * pch_udc_get_frame() - Get the current frame from device status register
+ * @dev:	Reference to pch_udc_dev structure
+ * Retern	current frame
+ */
+static inline int pch_udc_get_frame(struct pch_udc_dev *dev)
+{
+	u32 frame = pch_udc_readl(dev, UDC_DEVSTS_ADDR);
+	return (frame & UDC_DEVSTS_TS_MASK) >> UDC_DEVSTS_TS_SHIFT;
+}
+
+/**
+ * pch_udc_clear_selfpowered() - Clear the self power control
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_clear_selfpowered(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_clr(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_SP);
+}
+
+/**
+ * pch_udc_set_selfpowered() - Set the self power control
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_set_selfpowered(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_SP);
+}
+
+/**
+ * pch_udc_set_disconnect() - Set the disconnect status.
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_set_disconnect(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+}
+
+/**
+ * pch_udc_clear_disconnect() - Clear the disconnect status.
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
+{
+	/* Clear the disconnect */
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+	mdelay(1);
+	/* Resume USB signalling */
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+static void pch_udc_init(struct pch_udc_dev *dev);
+
+/**
+ * pch_udc_reconnect() - This API initializes usb device controller,
+ *						and clear the disconnect status.
+ * @dev:		Reference to pch_udc_regs structure
+ */
+static void pch_udc_reconnect(struct pch_udc_dev *dev)
+{
+	pch_udc_init(dev);
+
+	/* enable device interrupts */
+	/* pch_udc_enable_interrupts() */
+	pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR,
+			UDC_DEVINT_UR | UDC_DEVINT_ENUM);
+
+	/* Clear the disconnect */
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+	mdelay(1);
+	/* Resume USB signalling */
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+/**
+ * pch_udc_vbus_session() - set or clearr the disconnect status.
+ * @dev:	Reference to pch_udc_regs structure
+ * @is_active:	Parameter specifying the action
+ *		  0:   indicating VBUS power is ending
+ *		  !0:  indicating VBUS power is starting
+ */
+static inline void pch_udc_vbus_session(struct pch_udc_dev *dev,
+					  int is_active)
+{
+	unsigned long		iflags;
+
+	spin_lock_irqsave(&dev->lock, iflags);
+	if (is_active) {
+		pch_udc_reconnect(dev);
+		dev->vbus_session = 1;
+	} else {
+		if (dev->driver && dev->driver->disconnect) {
+			spin_unlock_irqrestore(&dev->lock, iflags);
+			dev->driver->disconnect(&dev->gadget);
+			spin_lock_irqsave(&dev->lock, iflags);
+		}
+		pch_udc_set_disconnect(dev);
+		dev->vbus_session = 0;
+	}
+	spin_unlock_irqrestore(&dev->lock, iflags);
+}
+
+/**
+ * pch_udc_ep_set_stall() - Set the stall of endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static void pch_udc_ep_set_stall(struct pch_udc_ep *ep)
+{
+	if (ep->in) {
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F);
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+	} else {
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+	}
+}
+
+/**
+ * pch_udc_ep_clear_stall() - Clear the stall of endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_clear_stall(struct pch_udc_ep *ep)
+{
+	/* Clear the stall */
+	pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+	/* Clear NAK by writing CNAK */
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK);
+}
+
+/**
+ * pch_udc_ep_set_trfr_type() - Set the transfer type of endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @type:	Type of endpoint
+ */
+static inline void pch_udc_ep_set_trfr_type(struct pch_udc_ep *ep,
+					u8 type)
+{
+	pch_udc_ep_writel(ep, ((type << UDC_EPCTL_ET_SHIFT) &
+				UDC_EPCTL_ET_MASK), UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_bufsz() - Set the maximum packet size for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @buf_size:	The buffer word size
+ * @ep_in:	EP is IN
+ */
+static void pch_udc_ep_set_bufsz(struct pch_udc_ep *ep,
+						 u32 buf_size, u32 ep_in)
+{
+	u32 data;
+	if (ep_in) {
+		data = pch_udc_ep_readl(ep, UDC_BUFIN_FRAMENUM_ADDR);
+		data = (data & 0xffff0000) | (buf_size & 0xffff);
+		pch_udc_ep_writel(ep, data, UDC_BUFIN_FRAMENUM_ADDR);
+	} else {
+		data = pch_udc_ep_readl(ep, UDC_BUFOUT_MAXPKT_ADDR);
+		data = (buf_size << 16) | (data & 0xffff);
+		pch_udc_ep_writel(ep, data, UDC_BUFOUT_MAXPKT_ADDR);
+	}
+}
+
+/**
+ * pch_udc_ep_set_maxpkt() - Set the Max packet size for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @pkt_size:	The packet byte size
+ */
+static void pch_udc_ep_set_maxpkt(struct pch_udc_ep *ep, u32 pkt_size)
+{
+	u32 data = pch_udc_ep_readl(ep, UDC_BUFOUT_MAXPKT_ADDR);
+	data = (data & 0xffff0000) | (pkt_size & 0xffff);
+	pch_udc_ep_writel(ep, data, UDC_BUFOUT_MAXPKT_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_subptr() - Set the Setup buffer pointer for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @addr:	Address of the register
+ */
+static inline void pch_udc_ep_set_subptr(struct pch_udc_ep *ep, u32 addr)
+{
+	pch_udc_ep_writel(ep, addr, UDC_SUBPTR_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_ddptr() - Set the Data descriptor pointer for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @addr:	Address of the register
+ */
+static inline void pch_udc_ep_set_ddptr(struct pch_udc_ep *ep, u32 addr)
+{
+	pch_udc_ep_writel(ep, addr, UDC_DESPTR_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_pd() - Set the poll demand bit for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_pd(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_P);
+}
+
+/**
+ * pch_udc_ep_set_rrdy() - Set the receive ready bit for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_rrdy(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_RRDY);
+}
+
+/**
+ * pch_udc_ep_clear_rrdy() - Clear the receive ready bit for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_clear_rrdy(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_RRDY);
+}
+
+/**
+ * pch_udc_set_dma() - Set the 'TDE' or RDE bit of device control
+ *			register depending on the direction specified
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @dir:	whether Tx or Rx
+ *		  DMA_DIR_RX: Receive
+ *		  DMA_DIR_TX: Transmit
+ */
+static inline void pch_udc_set_dma(struct pch_udc_dev *dev, int dir)
+{
+	if (dir == DMA_DIR_RX)
+		pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RDE);
+	else if (dir == DMA_DIR_TX)
+		pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_TDE);
+}
+
+/**
+ * pch_udc_clear_dma() - Clear the 'TDE' or RDE bit of device control
+ *				 register depending on the direction specified
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @dir:	Whether Tx or Rx
+ *		  DMA_DIR_RX: Receive
+ *		  DMA_DIR_TX: Transmit
+ */
+static inline void pch_udc_clear_dma(struct pch_udc_dev *dev, int dir)
+{
+	if (dir == DMA_DIR_RX)
+		pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RDE);
+	else if (dir == DMA_DIR_TX)
+		pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_TDE);
+}
+
+/**
+ * pch_udc_set_csr_done() - Set the device control register
+ *				CSR done field (bit 13)
+ * @dev:	reference to structure of type pch_udc_regs
+ */
+static inline void pch_udc_set_csr_done(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_CSR_DONE);
+}
+
+/**
+ * pch_udc_disable_interrupts() - Disables the specified interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to disable interrupts
+ */
+static inline void pch_udc_disable_interrupts(struct pch_udc_dev *dev,
+					    u32 mask)
+{
+	pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_enable_interrupts() - Enable the specified interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to enable interrupts
+ */
+static inline void pch_udc_enable_interrupts(struct pch_udc_dev *dev,
+					   u32 mask)
+{
+	pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_disable_ep_interrupts() - Disable endpoint interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to disable interrupts
+ */
+static inline void pch_udc_disable_ep_interrupts(struct pch_udc_dev *dev,
+						u32 mask)
+{
+	pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_enable_ep_interrupts() - Enable endpoint interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to enable interrupts
+ */
+static inline void pch_udc_enable_ep_interrupts(struct pch_udc_dev *dev,
+					      u32 mask)
+{
+	pch_udc_bit_clr(dev, UDC_EPIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_read_device_interrupts() - Read the device interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * Retern	The device interrupts
+ */
+static inline u32 pch_udc_read_device_interrupts(struct pch_udc_dev *dev)
+{
+	return pch_udc_readl(dev, UDC_DEVIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_write_device_interrupts() - Write device interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @val:	The value to be written to interrupt register
+ */
+static inline void pch_udc_write_device_interrupts(struct pch_udc_dev *dev,
+						     u32 val)
+{
+	pch_udc_writel(dev, val, UDC_DEVIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_interrupts() - Read the endpoint interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * Retern	The endpoint interrupt
+ */
+static inline u32 pch_udc_read_ep_interrupts(struct pch_udc_dev *dev)
+{
+	return pch_udc_readl(dev, UDC_EPIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_write_ep_interrupts() - Clear endpoint interupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @val:	The value to be written to interrupt register
+ */
+static inline void pch_udc_write_ep_interrupts(struct pch_udc_dev *dev,
+					     u32 val)
+{
+	pch_udc_writel(dev, val, UDC_EPIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_device_status() - Read the device status
+ * @dev:	Reference to structure of type pch_udc_regs
+ * Retern	The device status
+ */
+static inline u32 pch_udc_read_device_status(struct pch_udc_dev *dev)
+{
+	return pch_udc_readl(dev, UDC_DEVSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_control() - Read the endpoint control
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * Retern	The endpoint control register value
+ */
+static inline u32 pch_udc_read_ep_control(struct pch_udc_ep *ep)
+{
+	return pch_udc_ep_readl(ep, UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_clear_ep_control() - Clear the endpoint control register
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * Retern	The endpoint control register value
+ */
+static inline void pch_udc_clear_ep_control(struct pch_udc_ep *ep)
+{
+	return pch_udc_ep_writel(ep, 0, UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_status() - Read the endpoint status
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * Retern	The endpoint status
+ */
+static inline u32 pch_udc_read_ep_status(struct pch_udc_ep *ep)
+{
+	return pch_udc_ep_readl(ep, UDC_EPSTS_ADDR);
+}
+
+/**
+ * pch_udc_clear_ep_status() - Clear the endpoint status
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @stat:	Endpoint status
+ */
+static inline void pch_udc_clear_ep_status(struct pch_udc_ep *ep,
+					 u32 stat)
+{
+	return pch_udc_ep_writel(ep, stat, UDC_EPSTS_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_nak() - Set the bit 7 (SNAK field)
+ *				of the endpoint control register
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_nak(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_SNAK);
+}
+
+/**
+ * pch_udc_ep_clear_nak() - Set the bit 8 (CNAK field)
+ *				of the endpoint control register
+ * @ep:		reference to structure of type pch_udc_ep_regs
+ */
+static void pch_udc_ep_clear_nak(struct pch_udc_ep *ep)
+{
+	unsigned int loopcnt = 0;
+	struct pch_udc_dev *dev = ep->dev;
+
+	if (!(pch_udc_ep_readl(ep, UDC_EPCTL_ADDR) & UDC_EPCTL_NAK))
+		return;
+	if (!ep->in) {
+		loopcnt = 10000;
+		while (!(pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP) &&
+			--loopcnt)
+			udelay(5);
+		if (!loopcnt)
+			dev_err(&dev->pdev->dev, "%s: RxFIFO not Empty\n",
+				__func__);
+	}
+	loopcnt = 10000;
+	while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_NAK) && --loopcnt) {
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK);
+		udelay(5);
+	}
+	if (!loopcnt)
+		dev_err(&dev->pdev->dev, "%s: Clear NAK not set for ep%d%s\n",
+			__func__, ep->num, (ep->in ? "in" : "out"));
+}
+
+/**
+ * pch_udc_ep_fifo_flush() - Flush the endpoint fifo
+ * @ep:	reference to structure of type pch_udc_ep_regs
+ * @dir:	direction of endpoint
+ *		  0:  endpoint is OUT
+ *		  !0: endpoint is IN
+ */
+static void pch_udc_ep_fifo_flush(struct pch_udc_ep *ep, int dir)
+{
+	if (dir) {	/* IN ep */
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F);
+		return;
+	}
+}
+
+/**
+ * pch_udc_ep_enable() - This api enables endpoint
+ * @ep:		reference to structure of type pch_udc_ep_regs
+ * @cfg:	current configuration information
+ * @desc:	endpoint descriptor
+ */
+static void pch_udc_ep_enable(struct pch_udc_ep *ep,
+			       struct pch_udc_cfg_data *cfg,
+			       const struct usb_endpoint_descriptor *desc)
+{
+	u32 val = 0;
+	u32 buff_size = 0;
+
+	pch_udc_ep_set_trfr_type(ep, desc->bmAttributes);
+	if (ep->in)
+		buff_size = UDC_EPIN_BUFF_SIZE;
+	else
+		buff_size = UDC_EPOUT_BUFF_SIZE;
+	pch_udc_ep_set_bufsz(ep, buff_size, ep->in);
+	pch_udc_ep_set_maxpkt(ep, usb_endpoint_maxp(desc));
+	pch_udc_ep_set_nak(ep);
+	pch_udc_ep_fifo_flush(ep, ep->in);
+	/* Configure the endpoint */
+	val = ep->num << UDC_CSR_NE_NUM_SHIFT | ep->in << UDC_CSR_NE_DIR_SHIFT |
+	      ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) <<
+		UDC_CSR_NE_TYPE_SHIFT) |
+	      (cfg->cur_cfg << UDC_CSR_NE_CFG_SHIFT) |
+	      (cfg->cur_intf << UDC_CSR_NE_INTF_SHIFT) |
+	      (cfg->cur_alt << UDC_CSR_NE_ALT_SHIFT) |
+	      usb_endpoint_maxp(desc) << UDC_CSR_NE_MAX_PKT_SHIFT;
+
+	if (ep->in)
+		pch_udc_write_csr(ep->dev, val, UDC_EPIN_IDX(ep->num));
+	else
+		pch_udc_write_csr(ep->dev, val, UDC_EPOUT_IDX(ep->num));
+}
+
+/**
+ * pch_udc_ep_disable() - This api disables endpoint
+ * @ep:		reference to structure of type pch_udc_ep_regs
+ */
+static void pch_udc_ep_disable(struct pch_udc_ep *ep)
+{
+	if (ep->in) {
+		/* flush the fifo */
+		pch_udc_ep_writel(ep, UDC_EPCTL_F, UDC_EPCTL_ADDR);
+		/* set NAK */
+		pch_udc_ep_writel(ep, UDC_EPCTL_SNAK, UDC_EPCTL_ADDR);
+		pch_udc_ep_bit_set(ep, UDC_EPSTS_ADDR, UDC_EPSTS_IN);
+	} else {
+		/* set NAK */
+		pch_udc_ep_writel(ep, UDC_EPCTL_SNAK, UDC_EPCTL_ADDR);
+	}
+	/* reset desc pointer */
+	pch_udc_ep_writel(ep, 0, UDC_DESPTR_ADDR);
+}
+
+/**
+ * pch_udc_wait_ep_stall() - Wait EP stall.
+ * @ep:		reference to structure of type pch_udc_ep_regs
+ */
+static void pch_udc_wait_ep_stall(struct pch_udc_ep *ep)
+{
+	unsigned int count = 10000;
+
+	/* Wait till idle */
+	while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_S) && --count)
+		udelay(5);
+	if (!count)
+		dev_err(&ep->dev->pdev->dev, "%s: wait error\n", __func__);
+}
+
+/**
+ * pch_udc_init() - This API initializes usb device controller
+ * @dev:	Rreference to pch_udc_regs structure
+ */
+static void pch_udc_init(struct pch_udc_dev *dev)
+{
+	if (NULL == dev) {
+		pr_err("%s: Invalid address\n", __func__);
+		return;
+	}
+	/* Soft Reset and Reset PHY */
+	pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+	pch_udc_writel(dev, UDC_SRST | UDC_PSRST, UDC_SRST_ADDR);
+	mdelay(1);
+	pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+	pch_udc_writel(dev, 0x00, UDC_SRST_ADDR);
+	mdelay(1);
+	/* mask and clear all device interrupts */
+	pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, UDC_DEVINT_MSK);
+	pch_udc_bit_set(dev, UDC_DEVIRQSTS_ADDR, UDC_DEVINT_MSK);
+
+	/* mask and clear all ep interrupts */
+	pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+	pch_udc_bit_set(dev, UDC_EPIRQSTS_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+
+	/* enable dynamic CSR programmingi, self powered and device speed */
+	if (speed_fs)
+		pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_CSR_PRG |
+				UDC_DEVCFG_SP | UDC_DEVCFG_SPD_FS);
+	else /* defaul high speed */
+		pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_CSR_PRG |
+				UDC_DEVCFG_SP | UDC_DEVCFG_SPD_HS);
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR,
+			(PCH_UDC_THLEN << UDC_DEVCTL_THLEN_SHIFT) |
+			(PCH_UDC_BRLEN << UDC_DEVCTL_BRLEN_SHIFT) |
+			UDC_DEVCTL_MODE | UDC_DEVCTL_BREN |
+			UDC_DEVCTL_THE);
+}
+
+/**
+ * pch_udc_exit() - This API exit usb device controller
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static void pch_udc_exit(struct pch_udc_dev *dev)
+{
+	/* mask all device interrupts */
+	pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, UDC_DEVINT_MSK);
+	/* mask all ep interrupts */
+	pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+	/* put device in disconnected state */
+	pch_udc_set_disconnect(dev);
+}
+
+/**
+ * pch_udc_pcd_get_frame() - This API is invoked to get the current frame number
+ * @gadget:	Reference to the gadget driver
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_get_frame(struct usb_gadget *gadget)
+{
+	struct pch_udc_dev	*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	return pch_udc_get_frame(dev);
+}
+
+/**
+ * pch_udc_pcd_wakeup() - This API is invoked to initiate a remote wakeup
+ * @gadget:	Reference to the gadget driver
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_wakeup(struct usb_gadget *gadget)
+{
+	struct pch_udc_dev	*dev;
+	unsigned long		flags;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	spin_lock_irqsave(&dev->lock, flags);
+	pch_udc_rmt_wakeup(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_selfpowered() - This API is invoked to specify whether the device
+ *				is self powered or not
+ * @gadget:	Reference to the gadget driver
+ * @value:	Specifies self powered or not
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_selfpowered(struct usb_gadget *gadget, int value)
+{
+	struct pch_udc_dev	*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	gadget->is_selfpowered = (value != 0);
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	if (value)
+		pch_udc_set_selfpowered(dev);
+	else
+		pch_udc_clear_selfpowered(dev);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_pullup() - This API is invoked to make the device
+ *				visible/invisible to the host
+ * @gadget:	Reference to the gadget driver
+ * @is_on:	Specifies whether the pull up is made active or inactive
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct pch_udc_dev	*dev;
+	unsigned long		iflags;
+
+	if (!gadget)
+		return -EINVAL;
+
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+
+	spin_lock_irqsave(&dev->lock, iflags);
+	if (is_on) {
+		pch_udc_reconnect(dev);
+	} else {
+		if (dev->driver && dev->driver->disconnect) {
+			spin_unlock_irqrestore(&dev->lock, iflags);
+			dev->driver->disconnect(&dev->gadget);
+			spin_lock_irqsave(&dev->lock, iflags);
+		}
+		pch_udc_set_disconnect(dev);
+	}
+	spin_unlock_irqrestore(&dev->lock, iflags);
+
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_vbus_session() - This API is used by a driver for an external
+ *				transceiver (or GPIO) that
+ *				detects a VBUS power session starting/ending
+ * @gadget:	Reference to the gadget driver
+ * @is_active:	specifies whether the session is starting or ending
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct pch_udc_dev	*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	pch_udc_vbus_session(dev, is_active);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_vbus_draw() - This API is used by gadget drivers during
+ *				SET_CONFIGURATION calls to
+ *				specify how much power the device can consume
+ * @gadget:	Reference to the gadget driver
+ * @mA:		specifies the current limit in 2mA unit
+ *
+ * Return codes:
+ *	-EINVAL:	If the gadget passed is NULL
+ *	-EOPNOTSUPP:
+ */
+static int pch_udc_pcd_vbus_draw(struct usb_gadget *gadget, unsigned int mA)
+{
+	return -EOPNOTSUPP;
+}
+
+static int pch_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver);
+static int pch_udc_stop(struct usb_gadget *g);
+
+static const struct usb_gadget_ops pch_udc_ops = {
+	.get_frame = pch_udc_pcd_get_frame,
+	.wakeup = pch_udc_pcd_wakeup,
+	.set_selfpowered = pch_udc_pcd_selfpowered,
+	.pullup = pch_udc_pcd_pullup,
+	.vbus_session = pch_udc_pcd_vbus_session,
+	.vbus_draw = pch_udc_pcd_vbus_draw,
+	.udc_start = pch_udc_start,
+	.udc_stop = pch_udc_stop,
+};
+
+/**
+ * pch_vbus_gpio_get_value() - This API gets value of GPIO port as VBUS status.
+ * @dev:	Reference to the driver structure
+ *
+ * Return value:
+ *	1: VBUS is high
+ *	0: VBUS is low
+ *     -1: It is not enable to detect VBUS using GPIO
+ */
+static int pch_vbus_gpio_get_value(struct pch_udc_dev *dev)
+{
+	int vbus = 0;
+
+	if (dev->vbus_gpio.port)
+		vbus = gpiod_get_value(dev->vbus_gpio.port) ? 1 : 0;
+	else
+		vbus = -1;
+
+	return vbus;
+}
+
+/**
+ * pch_vbus_gpio_work_fall() - This API keeps watch on VBUS becoming Low.
+ *                             If VBUS is Low, disconnect is processed
+ * @irq_work:	Structure for WorkQueue
+ *
+ */
+static void pch_vbus_gpio_work_fall(struct work_struct *irq_work)
+{
+	struct pch_vbus_gpio_data *vbus_gpio = container_of(irq_work,
+		struct pch_vbus_gpio_data, irq_work_fall);
+	struct pch_udc_dev *dev =
+		container_of(vbus_gpio, struct pch_udc_dev, vbus_gpio);
+	int vbus_saved = -1;
+	int vbus;
+	int count;
+
+	if (!dev->vbus_gpio.port)
+		return;
+
+	for (count = 0; count < (PCH_VBUS_PERIOD / PCH_VBUS_INTERVAL);
+		count++) {
+		vbus = pch_vbus_gpio_get_value(dev);
+
+		if ((vbus_saved == vbus) && (vbus == 0)) {
+			dev_dbg(&dev->pdev->dev, "VBUS fell");
+			if (dev->driver
+				&& dev->driver->disconnect) {
+				dev->driver->disconnect(
+					&dev->gadget);
+			}
+			if (dev->vbus_gpio.intr)
+				pch_udc_init(dev);
+			else
+				pch_udc_reconnect(dev);
+			return;
+		}
+		vbus_saved = vbus;
+		mdelay(PCH_VBUS_INTERVAL);
+	}
+}
+
+/**
+ * pch_vbus_gpio_work_rise() - This API checks VBUS is High.
+ *                             If VBUS is High, connect is processed
+ * @irq_work:	Structure for WorkQueue
+ *
+ */
+static void pch_vbus_gpio_work_rise(struct work_struct *irq_work)
+{
+	struct pch_vbus_gpio_data *vbus_gpio = container_of(irq_work,
+		struct pch_vbus_gpio_data, irq_work_rise);
+	struct pch_udc_dev *dev =
+		container_of(vbus_gpio, struct pch_udc_dev, vbus_gpio);
+	int vbus;
+
+	if (!dev->vbus_gpio.port)
+		return;
+
+	mdelay(PCH_VBUS_INTERVAL);
+	vbus = pch_vbus_gpio_get_value(dev);
+
+	if (vbus == 1) {
+		dev_dbg(&dev->pdev->dev, "VBUS rose");
+		pch_udc_reconnect(dev);
+		return;
+	}
+}
+
+/**
+ * pch_vbus_gpio_irq() - IRQ handler for GPIO interrupt for changing VBUS
+ * @irq:	Interrupt request number
+ * @data:	Reference to the device structure
+ *
+ * Return codes:
+ *	0: Success
+ *	-EINVAL: GPIO port is invalid or can't be initialized.
+ */
+static irqreturn_t pch_vbus_gpio_irq(int irq, void *data)
+{
+	struct pch_udc_dev *dev = (struct pch_udc_dev *)data;
+
+	if (!dev->vbus_gpio.port || !dev->vbus_gpio.intr)
+		return IRQ_NONE;
+
+	if (pch_vbus_gpio_get_value(dev))
+		schedule_work(&dev->vbus_gpio.irq_work_rise);
+	else
+		schedule_work(&dev->vbus_gpio.irq_work_fall);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * pch_vbus_gpio_init() - This API initializes GPIO port detecting VBUS.
+ * @dev:		Reference to the driver structure
+ *
+ * Return codes:
+ *	0: Success
+ *	-EINVAL: GPIO port is invalid or can't be initialized.
+ */
+static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
+{
+	struct device *d = &dev->pdev->dev;
+	int err;
+	int irq_num = 0;
+	struct gpio_desc *gpiod;
+
+	dev->vbus_gpio.port = NULL;
+	dev->vbus_gpio.intr = 0;
+
+	/* Retrieve the GPIO line from the USB gadget device */
+	gpiod = devm_gpiod_get_optional(d, NULL, GPIOD_IN);
+	if (IS_ERR(gpiod))
+		return PTR_ERR(gpiod);
+	gpiod_set_consumer_name(gpiod, "pch_vbus");
+
+	dev->vbus_gpio.port = gpiod;
+	INIT_WORK(&dev->vbus_gpio.irq_work_fall, pch_vbus_gpio_work_fall);
+
+	irq_num = gpiod_to_irq(gpiod);
+	if (irq_num > 0) {
+		irq_set_irq_type(irq_num, IRQ_TYPE_EDGE_BOTH);
+		err = request_irq(irq_num, pch_vbus_gpio_irq, 0,
+			"vbus_detect", dev);
+		if (!err) {
+			dev->vbus_gpio.intr = irq_num;
+			INIT_WORK(&dev->vbus_gpio.irq_work_rise,
+				pch_vbus_gpio_work_rise);
+		} else {
+			pr_err("%s: can't request irq %d, err: %d\n",
+				__func__, irq_num, err);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * pch_vbus_gpio_free() - This API frees resources of GPIO port
+ * @dev:	Reference to the driver structure
+ */
+static void pch_vbus_gpio_free(struct pch_udc_dev *dev)
+{
+	if (dev->vbus_gpio.intr)
+		free_irq(dev->vbus_gpio.intr, dev);
+}
+
+/**
+ * complete_req() - This API is invoked from the driver when processing
+ *			of a request is complete
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request structure
+ * @status:	Indicates the success/failure of completion
+ */
+static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
+								 int status)
+	__releases(&dev->lock)
+	__acquires(&dev->lock)
+{
+	struct pch_udc_dev	*dev;
+	unsigned halted = ep->halted;
+
+	list_del_init(&req->queue);
+
+	/* set new status if pending */
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	dev = ep->dev;
+	usb_gadget_unmap_request(&dev->gadget, &req->req, ep->in);
+	ep->halted = 1;
+	spin_unlock(&dev->lock);
+	if (!ep->in)
+		pch_udc_ep_clear_rrdy(ep);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
+	spin_lock(&dev->lock);
+	ep->halted = halted;
+}
+
+/**
+ * empty_req_queue() - This API empties the request queue of an endpoint
+ * @ep:		Reference to the endpoint structure
+ */
+static void empty_req_queue(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request	*req;
+
+	ep->halted = 1;
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+		complete_req(ep, req, -ESHUTDOWN);	/* Remove from list */
+	}
+}
+
+/**
+ * pch_udc_free_dma_chain() - This function frees the DMA chain created
+ *				for the request
+ * @dev:	Reference to the driver structure
+ * @req:	Reference to the request to be freed
+ *
+ * Return codes:
+ *	0: Success
+ */
+static void pch_udc_free_dma_chain(struct pch_udc_dev *dev,
+				   struct pch_udc_request *req)
+{
+	struct pch_udc_data_dma_desc *td = req->td_data;
+	unsigned i = req->chain_len;
+
+	dma_addr_t addr2;
+	dma_addr_t addr = (dma_addr_t)td->next;
+	td->next = 0x00;
+	for (; i > 1; --i) {
+		/* do not free first desc., will be done by free for request */
+		td = phys_to_virt(addr);
+		addr2 = (dma_addr_t)td->next;
+		dma_pool_free(dev->data_requests, td, addr);
+		addr = addr2;
+	}
+	req->chain_len = 1;
+}
+
+/**
+ * pch_udc_create_dma_chain() - This function creates or reinitializes
+ *				a DMA chain
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request
+ * @buf_len:	The buffer length
+ * @gfp_flags:	Flags to be used while mapping the data buffer
+ *
+ * Return codes:
+ *	0:		success,
+ *	-ENOMEM:	dma_pool_alloc invocation fails
+ */
+static int pch_udc_create_dma_chain(struct pch_udc_ep *ep,
+				    struct pch_udc_request *req,
+				    unsigned long buf_len,
+				    gfp_t gfp_flags)
+{
+	struct pch_udc_data_dma_desc *td = req->td_data, *last;
+	unsigned long bytes = req->req.length, i = 0;
+	dma_addr_t dma_addr;
+	unsigned len = 1;
+
+	if (req->chain_len > 1)
+		pch_udc_free_dma_chain(ep->dev, req);
+
+	td->dataptr = req->req.dma;
+	td->status = PCH_UDC_BS_HST_BSY;
+
+	for (; ; bytes -= buf_len, ++len) {
+		td->status = PCH_UDC_BS_HST_BSY | min(buf_len, bytes);
+		if (bytes <= buf_len)
+			break;
+		last = td;
+		td = dma_pool_alloc(ep->dev->data_requests, gfp_flags,
+				    &dma_addr);
+		if (!td)
+			goto nomem;
+		i += buf_len;
+		td->dataptr = req->td_data->dataptr + i;
+		last->next = dma_addr;
+	}
+
+	req->td_data_last = td;
+	td->status |= PCH_UDC_DMA_LAST;
+	td->next = req->td_data_phys;
+	req->chain_len = len;
+	return 0;
+
+nomem:
+	if (len > 1) {
+		req->chain_len = len;
+		pch_udc_free_dma_chain(ep->dev, req);
+	}
+	req->chain_len = 1;
+	return -ENOMEM;
+}
+
+/**
+ * prepare_dma() - This function creates and initializes the DMA chain
+ *			for the request
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request
+ * @gfp:	Flag to be used while mapping the data buffer
+ *
+ * Return codes:
+ *	0:		Success
+ *	Other 0:	linux error number on failure
+ */
+static int prepare_dma(struct pch_udc_ep *ep, struct pch_udc_request *req,
+			  gfp_t gfp)
+{
+	int	retval;
+
+	/* Allocate and create a DMA chain */
+	retval = pch_udc_create_dma_chain(ep, req, ep->ep.maxpacket, gfp);
+	if (retval) {
+		pr_err("%s: could not create DMA chain:%d\n", __func__, retval);
+		return retval;
+	}
+	if (ep->in)
+		req->td_data->status = (req->td_data->status &
+				~PCH_UDC_BUFF_STS) | PCH_UDC_BS_HST_RDY;
+	return 0;
+}
+
+/**
+ * process_zlp() - This function process zero length packets
+ *			from the gadget driver
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request
+ */
+static void process_zlp(struct pch_udc_ep *ep, struct pch_udc_request *req)
+{
+	struct pch_udc_dev	*dev = ep->dev;
+
+	/* IN zlp's are handled by hardware */
+	complete_req(ep, req, 0);
+
+	/* if set_config or set_intf is waiting for ack by zlp
+	 * then set CSR_DONE
+	 */
+	if (dev->set_cfg_not_acked) {
+		pch_udc_set_csr_done(dev);
+		dev->set_cfg_not_acked = 0;
+	}
+	/* setup command is ACK'ed now by zlp */
+	if (!dev->stall && dev->waiting_zlp_ack) {
+		pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
+		dev->waiting_zlp_ack = 0;
+	}
+}
+
+/**
+ * pch_udc_start_rxrequest() - This function starts the receive requirement.
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request structure
+ */
+static void pch_udc_start_rxrequest(struct pch_udc_ep *ep,
+					 struct pch_udc_request *req)
+{
+	struct pch_udc_data_dma_desc *td_data;
+
+	pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
+	td_data = req->td_data;
+	/* Set the status bits for all descriptors */
+	while (1) {
+		td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
+				    PCH_UDC_BS_HST_RDY;
+		if ((td_data->status & PCH_UDC_DMA_LAST) ==  PCH_UDC_DMA_LAST)
+			break;
+		td_data = phys_to_virt(td_data->next);
+	}
+	/* Write the descriptor pointer */
+	pch_udc_ep_set_ddptr(ep, req->td_data_phys);
+	req->dma_going = 1;
+	pch_udc_enable_ep_interrupts(ep->dev, UDC_EPINT_OUT_EP0 << ep->num);
+	pch_udc_set_dma(ep->dev, DMA_DIR_RX);
+	pch_udc_ep_clear_nak(ep);
+	pch_udc_ep_set_rrdy(ep);
+}
+
+/**
+ * pch_udc_pcd_ep_enable() - This API enables the endpoint. It is called
+ *				from gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @desc:	Reference to the USB endpoint descriptor structure
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:
+ *	-ESHUTDOWN:
+ */
+static int pch_udc_pcd_ep_enable(struct usb_ep *usbep,
+				    const struct usb_endpoint_descriptor *desc)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_dev	*dev;
+	unsigned long		iflags;
+
+	if (!usbep || (usbep->name == ep0_string) || !desc ||
+	    (desc->bDescriptorType != USB_DT_ENDPOINT) || !desc->wMaxPacketSize)
+		return -EINVAL;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&dev->lock, iflags);
+	ep->ep.desc = desc;
+	ep->halted = 0;
+	pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc);
+	ep->ep.maxpacket = usb_endpoint_maxp(desc);
+	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	spin_unlock_irqrestore(&dev->lock, iflags);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_ep_disable() - This API disables endpoint and is called
+ *				from gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:
+ */
+static int pch_udc_pcd_ep_disable(struct usb_ep *usbep)
+{
+	struct pch_udc_ep	*ep;
+	unsigned long	iflags;
+
+	if (!usbep)
+		return -EINVAL;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	if ((usbep->name == ep0_string) || !ep->ep.desc)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->dev->lock, iflags);
+	empty_req_queue(ep);
+	ep->halted = 1;
+	pch_udc_ep_disable(ep);
+	pch_udc_disable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	ep->ep.desc = NULL;
+	INIT_LIST_HEAD(&ep->queue);
+	spin_unlock_irqrestore(&ep->dev->lock, iflags);
+	return 0;
+}
+
+/**
+ * pch_udc_alloc_request() - This function allocates request structure.
+ *				It is called by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @gfp:	Flag to be used while allocating memory
+ *
+ * Return codes:
+ *	NULL:			Failure
+ *	Allocated address:	Success
+ */
+static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep,
+						  gfp_t gfp)
+{
+	struct pch_udc_request		*req;
+	struct pch_udc_ep		*ep;
+	struct pch_udc_data_dma_desc	*dma_desc;
+
+	if (!usbep)
+		return NULL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	req = kzalloc(sizeof *req, gfp);
+	if (!req)
+		return NULL;
+	req->req.dma = DMA_ADDR_INVALID;
+	INIT_LIST_HEAD(&req->queue);
+	if (!ep->dev->dma_addr)
+		return &req->req;
+	/* ep0 in requests are allocated from data pool here */
+	dma_desc = dma_pool_alloc(ep->dev->data_requests, gfp,
+				  &req->td_data_phys);
+	if (NULL == dma_desc) {
+		kfree(req);
+		return NULL;
+	}
+	/* prevent from using desc. - set HOST BUSY */
+	dma_desc->status |= PCH_UDC_BS_HST_BSY;
+	dma_desc->dataptr = lower_32_bits(DMA_ADDR_INVALID);
+	req->td_data = dma_desc;
+	req->td_data_last = dma_desc;
+	req->chain_len = 1;
+	return &req->req;
+}
+
+/**
+ * pch_udc_free_request() - This function frees request structure.
+ *				It is called by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @usbreq:	Reference to the USB request
+ */
+static void pch_udc_free_request(struct usb_ep *usbep,
+				  struct usb_request *usbreq)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_request	*req;
+	struct pch_udc_dev	*dev;
+
+	if (!usbep || !usbreq)
+		return;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	req = container_of(usbreq, struct pch_udc_request, req);
+	dev = ep->dev;
+	if (!list_empty(&req->queue))
+		dev_err(&dev->pdev->dev, "%s: %s req=0x%p queue not empty\n",
+			__func__, usbep->name, req);
+	if (req->td_data != NULL) {
+		if (req->chain_len > 1)
+			pch_udc_free_dma_chain(ep->dev, req);
+		dma_pool_free(ep->dev->data_requests, req->td_data,
+			      req->td_data_phys);
+	}
+	kfree(req);
+}
+
+/**
+ * pch_udc_pcd_queue() - This function queues a request packet. It is called
+ *			by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @usbreq:	Reference to the USB request
+ * @gfp:	Flag to be used while mapping the data buffer
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
+								 gfp_t gfp)
+{
+	int retval = 0;
+	struct pch_udc_ep	*ep;
+	struct pch_udc_dev	*dev;
+	struct pch_udc_request	*req;
+	unsigned long	iflags;
+
+	if (!usbep || !usbreq || !usbreq->complete || !usbreq->buf)
+		return -EINVAL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if (!ep->ep.desc && ep->num)
+		return -EINVAL;
+	req = container_of(usbreq, struct pch_udc_request, req);
+	if (!list_empty(&req->queue))
+		return -EINVAL;
+	if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&dev->lock, iflags);
+	/* map the buffer for dma */
+	retval = usb_gadget_map_request(&dev->gadget, usbreq, ep->in);
+	if (retval)
+		goto probe_end;
+	if (usbreq->length > 0) {
+		retval = prepare_dma(ep, req, GFP_ATOMIC);
+		if (retval)
+			goto probe_end;
+	}
+	usbreq->actual = 0;
+	usbreq->status = -EINPROGRESS;
+	req->dma_done = 0;
+	if (list_empty(&ep->queue) && !ep->halted) {
+		/* no pending transfer, so start this req */
+		if (!usbreq->length) {
+			process_zlp(ep, req);
+			retval = 0;
+			goto probe_end;
+		}
+		if (!ep->in) {
+			pch_udc_start_rxrequest(ep, req);
+		} else {
+			/*
+			* For IN trfr the descriptors will be programmed and
+			* P bit will be set when
+			* we get an IN token
+			*/
+			pch_udc_wait_ep_stall(ep);
+			pch_udc_ep_clear_nak(ep);
+			pch_udc_enable_ep_interrupts(ep->dev, (1 << ep->num));
+		}
+	}
+	/* Now add this request to the ep's pending requests */
+	if (req != NULL)
+		list_add_tail(&req->queue, &ep->queue);
+
+probe_end:
+	spin_unlock_irqrestore(&dev->lock, iflags);
+	return retval;
+}
+
+/**
+ * pch_udc_pcd_dequeue() - This function de-queues a request packet.
+ *				It is called by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @usbreq:	Reference to the USB request
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_dequeue(struct usb_ep *usbep,
+				struct usb_request *usbreq)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_request	*req;
+	unsigned long		flags;
+	int ret = -EINVAL;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	if (!usbep || !usbreq || (!ep->ep.desc && ep->num))
+		return ret;
+	req = container_of(usbreq, struct pch_udc_request, req);
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	/* make sure it's still queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == usbreq) {
+			pch_udc_ep_set_nak(ep);
+			if (!list_empty(&req->queue))
+				complete_req(ep, req, -ECONNRESET);
+			ret = 0;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+	return ret;
+}
+
+/**
+ * pch_udc_pcd_set_halt() - This function Sets or clear the endpoint halt
+ *			    feature
+ * @usbep:	Reference to the USB endpoint structure
+ * @halt:	Specifies whether to set or clear the feature
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_set_halt(struct usb_ep *usbep, int halt)
+{
+	struct pch_udc_ep	*ep;
+	unsigned long iflags;
+	int ret;
+
+	if (!usbep)
+		return -EINVAL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	if (!ep->ep.desc && !ep->num)
+		return -EINVAL;
+	if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&udc_stall_spinlock, iflags);
+	if (list_empty(&ep->queue)) {
+		if (halt) {
+			if (ep->num == PCH_UDC_EP0)
+				ep->dev->stall = 1;
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(
+				ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+		} else {
+			pch_udc_ep_clear_stall(ep);
+		}
+		ret = 0;
+	} else {
+		ret = -EAGAIN;
+	}
+	spin_unlock_irqrestore(&udc_stall_spinlock, iflags);
+	return ret;
+}
+
+/**
+ * pch_udc_pcd_set_wedge() - This function Sets or clear the endpoint
+ *				halt feature
+ * @usbep:	Reference to the USB endpoint structure
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_set_wedge(struct usb_ep *usbep)
+{
+	struct pch_udc_ep	*ep;
+	unsigned long iflags;
+	int ret;
+
+	if (!usbep)
+		return -EINVAL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	if (!ep->ep.desc && !ep->num)
+		return -EINVAL;
+	if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&udc_stall_spinlock, iflags);
+	if (!list_empty(&ep->queue)) {
+		ret = -EAGAIN;
+	} else {
+		if (ep->num == PCH_UDC_EP0)
+			ep->dev->stall = 1;
+		pch_udc_ep_set_stall(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+		ep->dev->prot_stall = 1;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&udc_stall_spinlock, iflags);
+	return ret;
+}
+
+/**
+ * pch_udc_pcd_fifo_flush() - This function Flush the FIFO of specified endpoint
+ * @usbep:	Reference to the USB endpoint structure
+ */
+static void pch_udc_pcd_fifo_flush(struct usb_ep *usbep)
+{
+	struct pch_udc_ep  *ep;
+
+	if (!usbep)
+		return;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	if (ep->ep.desc || !ep->num)
+		pch_udc_ep_fifo_flush(ep, ep->in);
+}
+
+static const struct usb_ep_ops pch_udc_ep_ops = {
+	.enable		= pch_udc_pcd_ep_enable,
+	.disable	= pch_udc_pcd_ep_disable,
+	.alloc_request	= pch_udc_alloc_request,
+	.free_request	= pch_udc_free_request,
+	.queue		= pch_udc_pcd_queue,
+	.dequeue	= pch_udc_pcd_dequeue,
+	.set_halt	= pch_udc_pcd_set_halt,
+	.set_wedge	= pch_udc_pcd_set_wedge,
+	.fifo_status	= NULL,
+	.fifo_flush	= pch_udc_pcd_fifo_flush,
+};
+
+/**
+ * pch_udc_init_setup_buff() - This function initializes the SETUP buffer
+ * @td_stp:	Reference to the SETP buffer structure
+ */
+static void pch_udc_init_setup_buff(struct pch_udc_stp_dma_desc *td_stp)
+{
+	static u32	pky_marker;
+
+	if (!td_stp)
+		return;
+	td_stp->reserved = ++pky_marker;
+	memset(&td_stp->request, 0xFF, sizeof td_stp->request);
+	td_stp->status = PCH_UDC_BS_HST_RDY;
+}
+
+/**
+ * pch_udc_start_next_txrequest() - This function starts
+ *					the next transmission requirement
+ * @ep:	Reference to the endpoint structure
+ */
+static void pch_udc_start_next_txrequest(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request *req;
+	struct pch_udc_data_dma_desc *td_data;
+
+	if (pch_udc_read_ep_control(ep) & UDC_EPCTL_P)
+		return;
+
+	if (list_empty(&ep->queue))
+		return;
+
+	/* next request */
+	req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+	if (req->dma_going)
+		return;
+	if (!req->td_data)
+		return;
+	pch_udc_wait_ep_stall(ep);
+	req->dma_going = 1;
+	pch_udc_ep_set_ddptr(ep, 0);
+	td_data = req->td_data;
+	while (1) {
+		td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
+				   PCH_UDC_BS_HST_RDY;
+		if ((td_data->status & PCH_UDC_DMA_LAST) == PCH_UDC_DMA_LAST)
+			break;
+		td_data = phys_to_virt(td_data->next);
+	}
+	pch_udc_ep_set_ddptr(ep, req->td_data_phys);
+	pch_udc_set_dma(ep->dev, DMA_DIR_TX);
+	pch_udc_ep_set_pd(ep);
+	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	pch_udc_ep_clear_nak(ep);
+}
+
+/**
+ * pch_udc_complete_transfer() - This function completes a transfer
+ * @ep:		Reference to the endpoint structure
+ */
+static void pch_udc_complete_transfer(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request *req;
+	struct pch_udc_dev *dev = ep->dev;
+
+	if (list_empty(&ep->queue))
+		return;
+	req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+	if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
+	    PCH_UDC_BS_DMA_DONE)
+		return;
+	if ((req->td_data_last->status & PCH_UDC_RXTX_STS) !=
+	     PCH_UDC_RTS_SUCC) {
+		dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) "
+			"epstatus=0x%08x\n",
+		       (req->td_data_last->status & PCH_UDC_RXTX_STS),
+		       (int)(ep->epsts));
+		return;
+	}
+
+	req->req.actual = req->req.length;
+	req->td_data_last->status = PCH_UDC_BS_HST_BSY | PCH_UDC_DMA_LAST;
+	req->td_data->status = PCH_UDC_BS_HST_BSY | PCH_UDC_DMA_LAST;
+	complete_req(ep, req, 0);
+	req->dma_going = 0;
+	if (!list_empty(&ep->queue)) {
+		pch_udc_wait_ep_stall(ep);
+		pch_udc_ep_clear_nak(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+	} else {
+		pch_udc_disable_ep_interrupts(ep->dev,
+					      PCH_UDC_EPINT(ep->in, ep->num));
+	}
+}
+
+/**
+ * pch_udc_complete_receiver() - This function completes a receiver
+ * @ep:		Reference to the endpoint structure
+ */
+static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request *req;
+	struct pch_udc_dev *dev = ep->dev;
+	unsigned int count;
+	struct pch_udc_data_dma_desc *td;
+	dma_addr_t addr;
+
+	if (list_empty(&ep->queue))
+		return;
+	/* next request */
+	req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+	pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
+	pch_udc_ep_set_ddptr(ep, 0);
+	if ((req->td_data_last->status & PCH_UDC_BUFF_STS) ==
+	    PCH_UDC_BS_DMA_DONE)
+		td = req->td_data_last;
+	else
+		td = req->td_data;
+
+	while (1) {
+		if ((td->status & PCH_UDC_RXTX_STS) != PCH_UDC_RTS_SUCC) {
+			dev_err(&dev->pdev->dev, "Invalid RXTX status=0x%08x "
+				"epstatus=0x%08x\n",
+				(req->td_data->status & PCH_UDC_RXTX_STS),
+				(int)(ep->epsts));
+			return;
+		}
+		if ((td->status & PCH_UDC_BUFF_STS) == PCH_UDC_BS_DMA_DONE)
+			if (td->status & PCH_UDC_DMA_LAST) {
+				count = td->status & PCH_UDC_RXTX_BYTES;
+				break;
+			}
+		if (td == req->td_data_last) {
+			dev_err(&dev->pdev->dev, "Not complete RX descriptor");
+			return;
+		}
+		addr = (dma_addr_t)td->next;
+		td = phys_to_virt(addr);
+	}
+	/* on 64k packets the RXBYTES field is zero */
+	if (!count && (req->req.length == UDC_DMA_MAXPACKET))
+		count = UDC_DMA_MAXPACKET;
+	req->td_data->status |= PCH_UDC_DMA_LAST;
+	td->status |= PCH_UDC_BS_HST_BSY;
+
+	req->dma_going = 0;
+	req->req.actual = count;
+	complete_req(ep, req, 0);
+	/* If there is a new/failed requests try that now */
+	if (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+		pch_udc_start_rxrequest(ep, req);
+	}
+}
+
+/**
+ * pch_udc_svc_data_in() - This function process endpoint interrupts
+ *				for IN endpoints
+ * @dev:	Reference to the device structure
+ * @ep_num:	Endpoint that generated the interrupt
+ */
+static void pch_udc_svc_data_in(struct pch_udc_dev *dev, int ep_num)
+{
+	u32	epsts;
+	struct pch_udc_ep	*ep;
+
+	ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
+	epsts = ep->epsts;
+	ep->epsts = 0;
+
+	if (!(epsts & (UDC_EPSTS_IN | UDC_EPSTS_BNA  | UDC_EPSTS_HE |
+		       UDC_EPSTS_TDC | UDC_EPSTS_RCS | UDC_EPSTS_TXEMPTY |
+		       UDC_EPSTS_RSS | UDC_EPSTS_XFERDONE)))
+		return;
+	if ((epsts & UDC_EPSTS_BNA))
+		return;
+	if (epsts & UDC_EPSTS_HE)
+		return;
+	if (epsts & UDC_EPSTS_RSS) {
+		pch_udc_ep_set_stall(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+	}
+	if (epsts & UDC_EPSTS_RCS) {
+		if (!dev->prot_stall) {
+			pch_udc_ep_clear_stall(ep);
+		} else {
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+		}
+	}
+	if (epsts & UDC_EPSTS_TDC)
+		pch_udc_complete_transfer(ep);
+	/* On IN interrupt, provide data if we have any */
+	if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_RSS) &&
+	    !(epsts & UDC_EPSTS_TDC) && !(epsts & UDC_EPSTS_TXEMPTY))
+		pch_udc_start_next_txrequest(ep);
+}
+
+/**
+ * pch_udc_svc_data_out() - Handles interrupts from OUT endpoint
+ * @dev:	Reference to the device structure
+ * @ep_num:	Endpoint that generated the interrupt
+ */
+static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
+{
+	u32			epsts;
+	struct pch_udc_ep		*ep;
+	struct pch_udc_request		*req = NULL;
+
+	ep = &dev->ep[UDC_EPOUT_IDX(ep_num)];
+	epsts = ep->epsts;
+	ep->epsts = 0;
+
+	if ((epsts & UDC_EPSTS_BNA) && (!list_empty(&ep->queue))) {
+		/* next request */
+		req = list_entry(ep->queue.next, struct pch_udc_request,
+				 queue);
+		if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
+		     PCH_UDC_BS_DMA_DONE) {
+			if (!req->dma_going)
+				pch_udc_start_rxrequest(ep, req);
+			return;
+		}
+	}
+	if (epsts & UDC_EPSTS_HE)
+		return;
+	if (epsts & UDC_EPSTS_RSS) {
+		pch_udc_ep_set_stall(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+	}
+	if (epsts & UDC_EPSTS_RCS) {
+		if (!dev->prot_stall) {
+			pch_udc_ep_clear_stall(ep);
+		} else {
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+		}
+	}
+	if (((epsts & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+	    UDC_EPSTS_OUT_DATA) {
+		if (ep->dev->prot_stall == 1) {
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+		} else {
+			pch_udc_complete_receiver(ep);
+		}
+	}
+	if (list_empty(&ep->queue))
+		pch_udc_set_dma(dev, DMA_DIR_RX);
+}
+
+static int pch_udc_gadget_setup(struct pch_udc_dev *dev)
+	__must_hold(&dev->lock)
+{
+	int rc;
+
+	/* In some cases we can get an interrupt before driver gets setup */
+	if (!dev->driver)
+		return -ESHUTDOWN;
+
+	spin_unlock(&dev->lock);
+	rc = dev->driver->setup(&dev->gadget, &dev->setup_data);
+	spin_lock(&dev->lock);
+	return rc;
+}
+
+/**
+ * pch_udc_svc_control_in() - Handle Control IN endpoint interrupts
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
+{
+	u32	epsts;
+	struct pch_udc_ep	*ep;
+	struct pch_udc_ep	*ep_out;
+
+	ep = &dev->ep[UDC_EP0IN_IDX];
+	ep_out = &dev->ep[UDC_EP0OUT_IDX];
+	epsts = ep->epsts;
+	ep->epsts = 0;
+
+	if (!(epsts & (UDC_EPSTS_IN | UDC_EPSTS_BNA | UDC_EPSTS_HE |
+		       UDC_EPSTS_TDC | UDC_EPSTS_RCS | UDC_EPSTS_TXEMPTY |
+		       UDC_EPSTS_XFERDONE)))
+		return;
+	if ((epsts & UDC_EPSTS_BNA))
+		return;
+	if (epsts & UDC_EPSTS_HE)
+		return;
+	if ((epsts & UDC_EPSTS_TDC) && (!dev->stall)) {
+		pch_udc_complete_transfer(ep);
+		pch_udc_clear_dma(dev, DMA_DIR_RX);
+		ep_out->td_data->status = (ep_out->td_data->status &
+					~PCH_UDC_BUFF_STS) |
+					PCH_UDC_BS_HST_RDY;
+		pch_udc_ep_clear_nak(ep_out);
+		pch_udc_set_dma(dev, DMA_DIR_RX);
+		pch_udc_ep_set_rrdy(ep_out);
+	}
+	/* On IN interrupt, provide data if we have any */
+	if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_TDC) &&
+	     !(epsts & UDC_EPSTS_TXEMPTY))
+		pch_udc_start_next_txrequest(ep);
+}
+
+/**
+ * pch_udc_svc_control_out() - Routine that handle Control
+ *					OUT endpoint interrupts
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
+	__releases(&dev->lock)
+	__acquires(&dev->lock)
+{
+	u32	stat;
+	int setup_supported;
+	struct pch_udc_ep	*ep;
+
+	ep = &dev->ep[UDC_EP0OUT_IDX];
+	stat = ep->epsts;
+	ep->epsts = 0;
+
+	/* If setup data */
+	if (((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+	    UDC_EPSTS_OUT_SETUP) {
+		dev->stall = 0;
+		dev->ep[UDC_EP0IN_IDX].halted = 0;
+		dev->ep[UDC_EP0OUT_IDX].halted = 0;
+		dev->setup_data = ep->td_stp->request;
+		pch_udc_init_setup_buff(ep->td_stp);
+		pch_udc_clear_dma(dev, DMA_DIR_RX);
+		pch_udc_ep_fifo_flush(&(dev->ep[UDC_EP0IN_IDX]),
+				      dev->ep[UDC_EP0IN_IDX].in);
+		if ((dev->setup_data.bRequestType & USB_DIR_IN))
+			dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
+		else /* OUT */
+			dev->gadget.ep0 = &ep->ep;
+		/* If Mass storage Reset */
+		if ((dev->setup_data.bRequestType == 0x21) &&
+		    (dev->setup_data.bRequest == 0xFF))
+			dev->prot_stall = 0;
+		/* call gadget with setup data received */
+		setup_supported = pch_udc_gadget_setup(dev);
+
+		if (dev->setup_data.bRequestType & USB_DIR_IN) {
+			ep->td_data->status = (ep->td_data->status &
+						~PCH_UDC_BUFF_STS) |
+						PCH_UDC_BS_HST_RDY;
+			pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
+		}
+		/* ep0 in returns data on IN phase */
+		if (setup_supported >= 0 && setup_supported <
+					    UDC_EP0IN_MAX_PKT_SIZE) {
+			pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
+			/* Gadget would have queued a request when
+			 * we called the setup */
+			if (!(dev->setup_data.bRequestType & USB_DIR_IN)) {
+				pch_udc_set_dma(dev, DMA_DIR_RX);
+				pch_udc_ep_clear_nak(ep);
+			}
+		} else if (setup_supported < 0) {
+			/* if unsupported request, then stall */
+			pch_udc_ep_set_stall(&(dev->ep[UDC_EP0IN_IDX]));
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+			dev->stall = 0;
+			pch_udc_set_dma(dev, DMA_DIR_RX);
+		} else {
+			dev->waiting_zlp_ack = 1;
+		}
+	} else if ((((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+		     UDC_EPSTS_OUT_DATA) && !dev->stall) {
+		pch_udc_clear_dma(dev, DMA_DIR_RX);
+		pch_udc_ep_set_ddptr(ep, 0);
+		if (!list_empty(&ep->queue)) {
+			ep->epsts = stat;
+			pch_udc_svc_data_out(dev, PCH_UDC_EP0);
+		}
+		pch_udc_set_dma(dev, DMA_DIR_RX);
+	}
+	pch_udc_ep_set_rrdy(ep);
+}
+
+
+/**
+ * pch_udc_postsvc_epinters() - This function enables end point interrupts
+ *				and clears NAK status
+ * @dev:	Reference to the device structure
+ * @ep_num:	End point number
+ */
+static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num)
+{
+	struct pch_udc_ep	*ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
+	if (list_empty(&ep->queue))
+		return;
+	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	pch_udc_ep_clear_nak(ep);
+}
+
+/**
+ * pch_udc_read_all_epstatus() - This function read all endpoint status
+ * @dev:	Reference to the device structure
+ * @ep_intr:	Status of endpoint interrupt
+ */
+static void pch_udc_read_all_epstatus(struct pch_udc_dev *dev, u32 ep_intr)
+{
+	int i;
+	struct pch_udc_ep	*ep;
+
+	for (i = 0; i < PCH_UDC_USED_EP_NUM; i++) {
+		/* IN */
+		if (ep_intr & (0x1 << i)) {
+			ep = &dev->ep[UDC_EPIN_IDX(i)];
+			ep->epsts = pch_udc_read_ep_status(ep);
+			pch_udc_clear_ep_status(ep, ep->epsts);
+		}
+		/* OUT */
+		if (ep_intr & (0x10000 << i)) {
+			ep = &dev->ep[UDC_EPOUT_IDX(i)];
+			ep->epsts = pch_udc_read_ep_status(ep);
+			pch_udc_clear_ep_status(ep, ep->epsts);
+		}
+	}
+}
+
+/**
+ * pch_udc_activate_control_ep() - This function enables the control endpoints
+ *					for traffic after a reset
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_activate_control_ep(struct pch_udc_dev *dev)
+{
+	struct pch_udc_ep	*ep;
+	u32 val;
+
+	/* Setup the IN endpoint */
+	ep = &dev->ep[UDC_EP0IN_IDX];
+	pch_udc_clear_ep_control(ep);
+	pch_udc_ep_fifo_flush(ep, ep->in);
+	pch_udc_ep_set_bufsz(ep, UDC_EP0IN_BUFF_SIZE, ep->in);
+	pch_udc_ep_set_maxpkt(ep, UDC_EP0IN_MAX_PKT_SIZE);
+	/* Initialize the IN EP Descriptor */
+	ep->td_data      = NULL;
+	ep->td_stp       = NULL;
+	ep->td_data_phys = 0;
+	ep->td_stp_phys  = 0;
+
+	/* Setup the OUT endpoint */
+	ep = &dev->ep[UDC_EP0OUT_IDX];
+	pch_udc_clear_ep_control(ep);
+	pch_udc_ep_fifo_flush(ep, ep->in);
+	pch_udc_ep_set_bufsz(ep, UDC_EP0OUT_BUFF_SIZE, ep->in);
+	pch_udc_ep_set_maxpkt(ep, UDC_EP0OUT_MAX_PKT_SIZE);
+	val = UDC_EP0OUT_MAX_PKT_SIZE << UDC_CSR_NE_MAX_PKT_SHIFT;
+	pch_udc_write_csr(ep->dev, val, UDC_EP0OUT_IDX);
+
+	/* Initialize the SETUP buffer */
+	pch_udc_init_setup_buff(ep->td_stp);
+	/* Write the pointer address of dma descriptor */
+	pch_udc_ep_set_subptr(ep, ep->td_stp_phys);
+	/* Write the pointer address of Setup descriptor */
+	pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
+
+	/* Initialize the dma descriptor */
+	ep->td_data->status  = PCH_UDC_DMA_LAST;
+	ep->td_data->dataptr = dev->dma_addr;
+	ep->td_data->next    = ep->td_data_phys;
+
+	pch_udc_ep_clear_nak(ep);
+}
+
+
+/**
+ * pch_udc_svc_ur_interrupt() - This function handles a USB reset interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_ur_interrupt(struct pch_udc_dev *dev)
+{
+	struct pch_udc_ep	*ep;
+	int i;
+
+	pch_udc_clear_dma(dev, DMA_DIR_TX);
+	pch_udc_clear_dma(dev, DMA_DIR_RX);
+	/* Mask all endpoint interrupts */
+	pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+	/* clear all endpoint interrupts */
+	pch_udc_write_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+	for (i = 0; i < PCH_UDC_EP_NUM; i++) {
+		ep = &dev->ep[i];
+		pch_udc_clear_ep_status(ep, UDC_EPSTS_ALL_CLR_MASK);
+		pch_udc_clear_ep_control(ep);
+		pch_udc_ep_set_ddptr(ep, 0);
+		pch_udc_write_csr(ep->dev, 0x00, i);
+	}
+	dev->stall = 0;
+	dev->prot_stall = 0;
+	dev->waiting_zlp_ack = 0;
+	dev->set_cfg_not_acked = 0;
+
+	/* disable ep to empty req queue. Skip the control EP's */
+	for (i = 0; i < (PCH_UDC_USED_EP_NUM*2); i++) {
+		ep = &dev->ep[i];
+		pch_udc_ep_set_nak(ep);
+		pch_udc_ep_fifo_flush(ep, ep->in);
+		/* Complete request queue */
+		empty_req_queue(ep);
+	}
+	if (dev->driver) {
+		spin_unlock(&dev->lock);
+		usb_gadget_udc_reset(&dev->gadget, dev->driver);
+		spin_lock(&dev->lock);
+	}
+}
+
+/**
+ * pch_udc_svc_enum_interrupt() - This function handles a USB speed enumeration
+ *				done interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_enum_interrupt(struct pch_udc_dev *dev)
+{
+	u32 dev_stat, dev_speed;
+	u32 speed = USB_SPEED_FULL;
+
+	dev_stat = pch_udc_read_device_status(dev);
+	dev_speed = (dev_stat & UDC_DEVSTS_ENUM_SPEED_MASK) >>
+						 UDC_DEVSTS_ENUM_SPEED_SHIFT;
+	switch (dev_speed) {
+	case UDC_DEVSTS_ENUM_SPEED_HIGH:
+		speed = USB_SPEED_HIGH;
+		break;
+	case  UDC_DEVSTS_ENUM_SPEED_FULL:
+		speed = USB_SPEED_FULL;
+		break;
+	case  UDC_DEVSTS_ENUM_SPEED_LOW:
+		speed = USB_SPEED_LOW;
+		break;
+	default:
+		BUG();
+	}
+	dev->gadget.speed = speed;
+	pch_udc_activate_control_ep(dev);
+	pch_udc_enable_ep_interrupts(dev, UDC_EPINT_IN_EP0 | UDC_EPINT_OUT_EP0);
+	pch_udc_set_dma(dev, DMA_DIR_TX);
+	pch_udc_set_dma(dev, DMA_DIR_RX);
+	pch_udc_ep_set_rrdy(&(dev->ep[UDC_EP0OUT_IDX]));
+
+	/* enable device interrupts */
+	pch_udc_enable_interrupts(dev, UDC_DEVINT_UR | UDC_DEVINT_US |
+					UDC_DEVINT_ES | UDC_DEVINT_ENUM |
+					UDC_DEVINT_SI | UDC_DEVINT_SC);
+}
+
+/**
+ * pch_udc_svc_intf_interrupt() - This function handles a set interface
+ *				  interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_intf_interrupt(struct pch_udc_dev *dev)
+{
+	u32 reg, dev_stat = 0;
+	int i;
+
+	dev_stat = pch_udc_read_device_status(dev);
+	dev->cfg_data.cur_intf = (dev_stat & UDC_DEVSTS_INTF_MASK) >>
+							 UDC_DEVSTS_INTF_SHIFT;
+	dev->cfg_data.cur_alt = (dev_stat & UDC_DEVSTS_ALT_MASK) >>
+							 UDC_DEVSTS_ALT_SHIFT;
+	dev->set_cfg_not_acked = 1;
+	/* Construct the usb request for gadget driver and inform it */
+	memset(&dev->setup_data, 0 , sizeof dev->setup_data);
+	dev->setup_data.bRequest = USB_REQ_SET_INTERFACE;
+	dev->setup_data.bRequestType = USB_RECIP_INTERFACE;
+	dev->setup_data.wValue = cpu_to_le16(dev->cfg_data.cur_alt);
+	dev->setup_data.wIndex = cpu_to_le16(dev->cfg_data.cur_intf);
+	/* programm the Endpoint Cfg registers */
+	/* Only one end point cfg register */
+	reg = pch_udc_read_csr(dev, UDC_EP0OUT_IDX);
+	reg = (reg & ~UDC_CSR_NE_INTF_MASK) |
+	      (dev->cfg_data.cur_intf << UDC_CSR_NE_INTF_SHIFT);
+	reg = (reg & ~UDC_CSR_NE_ALT_MASK) |
+	      (dev->cfg_data.cur_alt << UDC_CSR_NE_ALT_SHIFT);
+	pch_udc_write_csr(dev, reg, UDC_EP0OUT_IDX);
+	for (i = 0; i < PCH_UDC_USED_EP_NUM * 2; i++) {
+		/* clear stall bits */
+		pch_udc_ep_clear_stall(&(dev->ep[i]));
+		dev->ep[i].halted = 0;
+	}
+	dev->stall = 0;
+	pch_udc_gadget_setup(dev);
+}
+
+/**
+ * pch_udc_svc_cfg_interrupt() - This function handles a set configuration
+ *				interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_cfg_interrupt(struct pch_udc_dev *dev)
+{
+	int i;
+	u32 reg, dev_stat = 0;
+
+	dev_stat = pch_udc_read_device_status(dev);
+	dev->set_cfg_not_acked = 1;
+	dev->cfg_data.cur_cfg = (dev_stat & UDC_DEVSTS_CFG_MASK) >>
+				UDC_DEVSTS_CFG_SHIFT;
+	/* make usb request for gadget driver */
+	memset(&dev->setup_data, 0 , sizeof dev->setup_data);
+	dev->setup_data.bRequest = USB_REQ_SET_CONFIGURATION;
+	dev->setup_data.wValue = cpu_to_le16(dev->cfg_data.cur_cfg);
+	/* program the NE registers */
+	/* Only one end point cfg register */
+	reg = pch_udc_read_csr(dev, UDC_EP0OUT_IDX);
+	reg = (reg & ~UDC_CSR_NE_CFG_MASK) |
+	      (dev->cfg_data.cur_cfg << UDC_CSR_NE_CFG_SHIFT);
+	pch_udc_write_csr(dev, reg, UDC_EP0OUT_IDX);
+	for (i = 0; i < PCH_UDC_USED_EP_NUM * 2; i++) {
+		/* clear stall bits */
+		pch_udc_ep_clear_stall(&(dev->ep[i]));
+		dev->ep[i].halted = 0;
+	}
+	dev->stall = 0;
+
+	/* call gadget zero with setup data received */
+	pch_udc_gadget_setup(dev);
+}
+
+/**
+ * pch_udc_dev_isr() - This function services device interrupts
+ *			by invoking appropriate routines.
+ * @dev:	Reference to the device structure
+ * @dev_intr:	The Device interrupt status.
+ */
+static void pch_udc_dev_isr(struct pch_udc_dev *dev, u32 dev_intr)
+{
+	int vbus;
+
+	/* USB Reset Interrupt */
+	if (dev_intr & UDC_DEVINT_UR) {
+		pch_udc_svc_ur_interrupt(dev);
+		dev_dbg(&dev->pdev->dev, "USB_RESET\n");
+	}
+	/* Enumeration Done Interrupt */
+	if (dev_intr & UDC_DEVINT_ENUM) {
+		pch_udc_svc_enum_interrupt(dev);
+		dev_dbg(&dev->pdev->dev, "USB_ENUM\n");
+	}
+	/* Set Interface Interrupt */
+	if (dev_intr & UDC_DEVINT_SI)
+		pch_udc_svc_intf_interrupt(dev);
+	/* Set Config Interrupt */
+	if (dev_intr & UDC_DEVINT_SC)
+		pch_udc_svc_cfg_interrupt(dev);
+	/* USB Suspend interrupt */
+	if (dev_intr & UDC_DEVINT_US) {
+		if (dev->driver
+			&& dev->driver->suspend) {
+			spin_unlock(&dev->lock);
+			dev->driver->suspend(&dev->gadget);
+			spin_lock(&dev->lock);
+		}
+
+		vbus = pch_vbus_gpio_get_value(dev);
+		if ((dev->vbus_session == 0)
+			&& (vbus != 1)) {
+			if (dev->driver && dev->driver->disconnect) {
+				spin_unlock(&dev->lock);
+				dev->driver->disconnect(&dev->gadget);
+				spin_lock(&dev->lock);
+			}
+			pch_udc_reconnect(dev);
+		} else if ((dev->vbus_session == 0)
+			&& (vbus == 1)
+			&& !dev->vbus_gpio.intr)
+			schedule_work(&dev->vbus_gpio.irq_work_fall);
+
+		dev_dbg(&dev->pdev->dev, "USB_SUSPEND\n");
+	}
+	/* Clear the SOF interrupt, if enabled */
+	if (dev_intr & UDC_DEVINT_SOF)
+		dev_dbg(&dev->pdev->dev, "SOF\n");
+	/* ES interrupt, IDLE > 3ms on the USB */
+	if (dev_intr & UDC_DEVINT_ES)
+		dev_dbg(&dev->pdev->dev, "ES\n");
+	/* RWKP interrupt */
+	if (dev_intr & UDC_DEVINT_RWKP)
+		dev_dbg(&dev->pdev->dev, "RWKP\n");
+}
+
+/**
+ * pch_udc_isr() - This function handles interrupts from the PCH USB Device
+ * @irq:	Interrupt request number
+ * @pdev:	Reference to the device structure
+ */
+static irqreturn_t pch_udc_isr(int irq, void *pdev)
+{
+	struct pch_udc_dev *dev = (struct pch_udc_dev *) pdev;
+	u32 dev_intr, ep_intr;
+	int i;
+
+	dev_intr = pch_udc_read_device_interrupts(dev);
+	ep_intr = pch_udc_read_ep_interrupts(dev);
+
+	/* For a hot plug, this find that the controller is hung up. */
+	if (dev_intr == ep_intr)
+		if (dev_intr == pch_udc_readl(dev, UDC_DEVCFG_ADDR)) {
+			dev_dbg(&dev->pdev->dev, "UDC: Hung up\n");
+			/* The controller is reset */
+			pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+			return IRQ_HANDLED;
+		}
+	if (dev_intr)
+		/* Clear device interrupts */
+		pch_udc_write_device_interrupts(dev, dev_intr);
+	if (ep_intr)
+		/* Clear ep interrupts */
+		pch_udc_write_ep_interrupts(dev, ep_intr);
+	if (!dev_intr && !ep_intr)
+		return IRQ_NONE;
+	spin_lock(&dev->lock);
+	if (dev_intr)
+		pch_udc_dev_isr(dev, dev_intr);
+	if (ep_intr) {
+		pch_udc_read_all_epstatus(dev, ep_intr);
+		/* Process Control In interrupts, if present */
+		if (ep_intr & UDC_EPINT_IN_EP0) {
+			pch_udc_svc_control_in(dev);
+			pch_udc_postsvc_epinters(dev, 0);
+		}
+		/* Process Control Out interrupts, if present */
+		if (ep_intr & UDC_EPINT_OUT_EP0)
+			pch_udc_svc_control_out(dev);
+		/* Process data in end point interrupts */
+		for (i = 1; i < PCH_UDC_USED_EP_NUM; i++) {
+			if (ep_intr & (1 <<  i)) {
+				pch_udc_svc_data_in(dev, i);
+				pch_udc_postsvc_epinters(dev, i);
+			}
+		}
+		/* Process data out end point interrupts */
+		for (i = UDC_EPINT_OUT_SHIFT + 1; i < (UDC_EPINT_OUT_SHIFT +
+						 PCH_UDC_USED_EP_NUM); i++)
+			if (ep_intr & (1 <<  i))
+				pch_udc_svc_data_out(dev, i -
+							 UDC_EPINT_OUT_SHIFT);
+	}
+	spin_unlock(&dev->lock);
+	return IRQ_HANDLED;
+}
+
+/**
+ * pch_udc_setup_ep0() - This function enables control endpoint for traffic
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_setup_ep0(struct pch_udc_dev *dev)
+{
+	/* enable ep0 interrupts */
+	pch_udc_enable_ep_interrupts(dev, UDC_EPINT_IN_EP0 |
+						UDC_EPINT_OUT_EP0);
+	/* enable device interrupts */
+	pch_udc_enable_interrupts(dev, UDC_DEVINT_UR | UDC_DEVINT_US |
+				       UDC_DEVINT_ES | UDC_DEVINT_ENUM |
+				       UDC_DEVINT_SI | UDC_DEVINT_SC);
+}
+
+/**
+ * pch_udc_pcd_reinit() - This API initializes the endpoint structures
+ * @dev:	Reference to the driver structure
+ */
+static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
+{
+	const char *const ep_string[] = {
+		ep0_string, "ep0out", "ep1in", "ep1out", "ep2in", "ep2out",
+		"ep3in", "ep3out", "ep4in", "ep4out", "ep5in", "ep5out",
+		"ep6in", "ep6out", "ep7in", "ep7out", "ep8in", "ep8out",
+		"ep9in", "ep9out", "ep10in", "ep10out", "ep11in", "ep11out",
+		"ep12in", "ep12out", "ep13in", "ep13out", "ep14in", "ep14out",
+		"ep15in", "ep15out",
+	};
+	int i;
+
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+
+	/* Initialize the endpoints structures */
+	memset(dev->ep, 0, sizeof dev->ep);
+	for (i = 0; i < PCH_UDC_EP_NUM; i++) {
+		struct pch_udc_ep *ep = &dev->ep[i];
+		ep->dev = dev;
+		ep->halted = 1;
+		ep->num = i / 2;
+		ep->in = ~i & 1;
+		ep->ep.name = ep_string[i];
+		ep->ep.ops = &pch_udc_ep_ops;
+		if (ep->in) {
+			ep->offset_addr = ep->num * UDC_EP_REG_SHIFT;
+			ep->ep.caps.dir_in = true;
+		} else {
+			ep->offset_addr = (UDC_EPINT_OUT_SHIFT + ep->num) *
+					  UDC_EP_REG_SHIFT;
+			ep->ep.caps.dir_out = true;
+		}
+		if (i == UDC_EP0IN_IDX || i == UDC_EP0OUT_IDX) {
+			ep->ep.caps.type_control = true;
+		} else {
+			ep->ep.caps.type_iso = true;
+			ep->ep.caps.type_bulk = true;
+			ep->ep.caps.type_int = true;
+		}
+		/* need to set ep->ep.maxpacket and set Default Configuration?*/
+		usb_ep_set_maxpacket_limit(&ep->ep, UDC_BULK_MAX_PKT_SIZE);
+		list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
+		INIT_LIST_HEAD(&ep->queue);
+	}
+	usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0IN_IDX].ep, UDC_EP0IN_MAX_PKT_SIZE);
+	usb_ep_set_maxpacket_limit(&dev->ep[UDC_EP0OUT_IDX].ep, UDC_EP0OUT_MAX_PKT_SIZE);
+
+	/* remove ep0 in and out from the list.  They have own pointer */
+	list_del_init(&dev->ep[UDC_EP0IN_IDX].ep.ep_list);
+	list_del_init(&dev->ep[UDC_EP0OUT_IDX].ep.ep_list);
+
+	dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+}
+
+/**
+ * pch_udc_pcd_init() - This API initializes the driver structure
+ * @dev:	Reference to the driver structure
+ *
+ * Return codes:
+ *	0:		Success
+ *	-ERRNO:		All kind of errors when retrieving VBUS GPIO
+ */
+static int pch_udc_pcd_init(struct pch_udc_dev *dev)
+{
+	int ret;
+
+	pch_udc_init(dev);
+	pch_udc_pcd_reinit(dev);
+
+	ret = pch_vbus_gpio_init(dev);
+	if (ret)
+		pch_udc_exit(dev);
+	return ret;
+}
+
+/**
+ * init_dma_pools() - create dma pools during initialization
+ * @dev:	reference to struct pci_dev
+ */
+static int init_dma_pools(struct pch_udc_dev *dev)
+{
+	struct pch_udc_stp_dma_desc	*td_stp;
+	struct pch_udc_data_dma_desc	*td_data;
+	void				*ep0out_buf;
+
+	/* DMA setup */
+	dev->data_requests = dma_pool_create("data_requests", &dev->pdev->dev,
+		sizeof(struct pch_udc_data_dma_desc), 0, 0);
+	if (!dev->data_requests) {
+		dev_err(&dev->pdev->dev, "%s: can't get request data pool\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	/* dma desc for setup data */
+	dev->stp_requests = dma_pool_create("setup requests", &dev->pdev->dev,
+		sizeof(struct pch_udc_stp_dma_desc), 0, 0);
+	if (!dev->stp_requests) {
+		dev_err(&dev->pdev->dev, "%s: can't get setup request pool\n",
+			__func__);
+		return -ENOMEM;
+	}
+	/* setup */
+	td_stp = dma_pool_alloc(dev->stp_requests, GFP_KERNEL,
+				&dev->ep[UDC_EP0OUT_IDX].td_stp_phys);
+	if (!td_stp) {
+		dev_err(&dev->pdev->dev,
+			"%s: can't allocate setup dma descriptor\n", __func__);
+		return -ENOMEM;
+	}
+	dev->ep[UDC_EP0OUT_IDX].td_stp = td_stp;
+
+	/* data: 0 packets !? */
+	td_data = dma_pool_alloc(dev->data_requests, GFP_KERNEL,
+				&dev->ep[UDC_EP0OUT_IDX].td_data_phys);
+	if (!td_data) {
+		dev_err(&dev->pdev->dev,
+			"%s: can't allocate data dma descriptor\n", __func__);
+		return -ENOMEM;
+	}
+	dev->ep[UDC_EP0OUT_IDX].td_data = td_data;
+	dev->ep[UDC_EP0IN_IDX].td_stp = NULL;
+	dev->ep[UDC_EP0IN_IDX].td_stp_phys = 0;
+	dev->ep[UDC_EP0IN_IDX].td_data = NULL;
+	dev->ep[UDC_EP0IN_IDX].td_data_phys = 0;
+
+	ep0out_buf = devm_kzalloc(&dev->pdev->dev, UDC_EP0OUT_BUFF_SIZE * 4,
+				  GFP_KERNEL);
+	if (!ep0out_buf)
+		return -ENOMEM;
+	dev->dma_addr = dma_map_single(&dev->pdev->dev, ep0out_buf,
+				       UDC_EP0OUT_BUFF_SIZE * 4,
+				       DMA_FROM_DEVICE);
+	return dma_mapping_error(&dev->pdev->dev, dev->dma_addr);
+}
+
+static int pch_udc_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
+{
+	struct pch_udc_dev	*dev = to_pch_udc(g);
+
+	dev->driver = driver;
+
+	/* get ready for ep0 traffic */
+	pch_udc_setup_ep0(dev);
+
+	/* clear SD */
+	if ((pch_vbus_gpio_get_value(dev) != 0) || !dev->vbus_gpio.intr)
+		pch_udc_clear_disconnect(dev);
+
+	dev->connected = 1;
+	return 0;
+}
+
+static int pch_udc_stop(struct usb_gadget *g)
+{
+	struct pch_udc_dev	*dev = to_pch_udc(g);
+
+	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+
+	/* Assures that there are no pending requests with this driver */
+	dev->driver = NULL;
+	dev->connected = 0;
+
+	/* set SD */
+	pch_udc_set_disconnect(dev);
+
+	return 0;
+}
+
+static void pch_vbus_gpio_remove_table(void *table)
+{
+	gpiod_remove_lookup_table(table);
+}
+
+static int pch_vbus_gpio_add_table(struct device *d, void *table)
+{
+	gpiod_add_lookup_table(table);
+	return devm_add_action_or_reset(d, pch_vbus_gpio_remove_table, table);
+}
+
+static struct gpiod_lookup_table pch_udc_minnow_vbus_gpio_table = {
+	.dev_id		= "0000:02:02.4",
+	.table		= {
+		GPIO_LOOKUP("sch_gpio.33158", 12, NULL, GPIO_ACTIVE_HIGH),
+		{}
+	},
+};
+
+static int pch_udc_minnow_platform_init(struct device *d)
+{
+	return pch_vbus_gpio_add_table(d, &pch_udc_minnow_vbus_gpio_table);
+}
+
+static int pch_udc_quark_platform_init(struct device *d)
+{
+	struct pch_udc_dev *dev = dev_get_drvdata(d);
+
+	dev->bar = PCH_UDC_PCI_BAR_QUARK_X1000;
+	return 0;
+}
+
+static void pch_udc_shutdown(struct pci_dev *pdev)
+{
+	struct pch_udc_dev *dev = pci_get_drvdata(pdev);
+
+	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+	pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+	/* disable the pullup so the host will think we're gone */
+	pch_udc_set_disconnect(dev);
+}
+
+static void pch_udc_remove(struct pci_dev *pdev)
+{
+	struct pch_udc_dev	*dev = pci_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&dev->gadget);
+
+	/* gadget driver must not be registered */
+	if (dev->driver)
+		dev_err(&pdev->dev,
+			"%s: gadget driver still bound!!!\n", __func__);
+	/* dma pool cleanup */
+	dma_pool_destroy(dev->data_requests);
+
+	if (dev->stp_requests) {
+		/* cleanup DMA desc's for ep0in */
+		if (dev->ep[UDC_EP0OUT_IDX].td_stp) {
+			dma_pool_free(dev->stp_requests,
+				dev->ep[UDC_EP0OUT_IDX].td_stp,
+				dev->ep[UDC_EP0OUT_IDX].td_stp_phys);
+		}
+		if (dev->ep[UDC_EP0OUT_IDX].td_data) {
+			dma_pool_free(dev->stp_requests,
+				dev->ep[UDC_EP0OUT_IDX].td_data,
+				dev->ep[UDC_EP0OUT_IDX].td_data_phys);
+		}
+		dma_pool_destroy(dev->stp_requests);
+	}
+
+	if (dev->dma_addr)
+		dma_unmap_single(&dev->pdev->dev, dev->dma_addr,
+				 UDC_EP0OUT_BUFF_SIZE * 4, DMA_FROM_DEVICE);
+
+	pch_vbus_gpio_free(dev);
+
+	pch_udc_exit(dev);
+}
+
+static int __maybe_unused pch_udc_suspend(struct device *d)
+{
+	struct pch_udc_dev *dev = dev_get_drvdata(d);
+
+	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+	pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+	return 0;
+}
+
+static int __maybe_unused pch_udc_resume(struct device *d)
+{
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pch_udc_pm, pch_udc_suspend, pch_udc_resume);
+
+typedef int (*platform_init_fn)(struct device *);
+
+static int pch_udc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	platform_init_fn platform_init = (platform_init_fn)id->driver_data;
+	int			retval;
+	struct pch_udc_dev	*dev;
+
+	/* init */
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	/* pci setup */
+	retval = pcim_enable_device(pdev);
+	if (retval)
+		return retval;
+
+	dev->bar = PCH_UDC_PCI_BAR;
+	dev->pdev = pdev;
+	pci_set_drvdata(pdev, dev);
+
+	/* Platform specific hook */
+	if (platform_init) {
+		retval = platform_init(&pdev->dev);
+		if (retval)
+			return retval;
+	}
+
+	/* PCI resource allocation */
+	retval = pcim_iomap_regions(pdev, BIT(dev->bar), pci_name(pdev));
+	if (retval)
+		return retval;
+
+	dev->base_addr = pcim_iomap_table(pdev)[dev->bar];
+
+	/* initialize the hardware */
+	retval = pch_udc_pcd_init(dev);
+	if (retval)
+		return retval;
+
+	pci_enable_msi(pdev);
+
+	retval = devm_request_irq(&pdev->dev, pdev->irq, pch_udc_isr,
+				  IRQF_SHARED, KBUILD_MODNAME, dev);
+	if (retval) {
+		dev_err(&pdev->dev, "%s: request_irq(%d) fail\n", __func__,
+			pdev->irq);
+		goto finished;
+	}
+
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	/* device struct setup */
+	spin_lock_init(&dev->lock);
+	dev->gadget.ops = &pch_udc_ops;
+
+	retval = init_dma_pools(dev);
+	if (retval)
+		goto finished;
+
+	dev->gadget.name = KBUILD_MODNAME;
+	dev->gadget.max_speed = USB_SPEED_HIGH;
+
+	/* Put the device in disconnected state till a driver is bound */
+	pch_udc_set_disconnect(dev);
+	retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
+	if (retval)
+		goto finished;
+	return 0;
+
+finished:
+	pch_udc_remove(pdev);
+	return retval;
+}
+
+static const struct pci_device_id pch_udc_pcidev_id[] = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC),
+		.class = PCI_CLASS_SERIAL_USB_DEVICE,
+		.class_mask = 0xffffffff,
+		.driver_data = (kernel_ulong_t)&pch_udc_quark_platform_init,
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC,
+			       PCI_VENDOR_ID_CIRCUITCO, PCI_SUBSYSTEM_ID_CIRCUITCO_MINNOWBOARD),
+		.class = PCI_CLASS_SERIAL_USB_DEVICE,
+		.class_mask = 0xffffffff,
+		.driver_data = (kernel_ulong_t)&pch_udc_minnow_platform_init,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC),
+		.class = PCI_CLASS_SERIAL_USB_DEVICE,
+		.class_mask = 0xffffffff,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7213_IOH_UDC),
+		.class = PCI_CLASS_SERIAL_USB_DEVICE,
+		.class_mask = 0xffffffff,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7831_IOH_UDC),
+		.class = PCI_CLASS_SERIAL_USB_DEVICE,
+		.class_mask = 0xffffffff,
+	},
+	{ 0 },
+};
+
+MODULE_DEVICE_TABLE(pci, pch_udc_pcidev_id);
+
+static struct pci_driver pch_udc_driver = {
+	.name =	KBUILD_MODNAME,
+	.id_table =	pch_udc_pcidev_id,
+	.probe =	pch_udc_probe,
+	.remove =	pch_udc_remove,
+	.shutdown =	pch_udc_shutdown,
+	.driver = {
+		.pm = &pch_udc_pm,
+	},
+};
+
+module_pci_driver(pch_udc_driver);
+
+MODULE_DESCRIPTION("Intel EG20T USB Device Controller");
+MODULE_AUTHOR("LAPIS Semiconductor, <tomoya-linux@dsn.lapis-semi.com>");
+MODULE_LICENSE("GPL");