Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1052 insertions, 0 deletions

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
new file mode 100644
index 000000000..f75cde0f2
--- /dev/null
+++ b/drivers/usb/musb/musb_dsps.c
@@ -0,0 +1,1052 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Texas Instruments DSPS platforms "glue layer"
+ *
+ * Copyright (C) 2012, by Texas Instruments
+ *
+ * Based on the am35x "glue layer" code.
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * musb_dsps.c will be a common file for all the TI DSPS platforms
+ * such as dm64x, dm36x, dm35x, da8x, am35x and ti81x.
+ * For now only ti81x is using this and in future davinci.c, am35x.c
+ * da8xx.c would be merged to this file after testing.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm_runtime.h>
+#include <linux/module.h>
+#include <linux/usb/usb_phy_generic.h>
+#include <linux/platform_data/usb-omap.h>
+#include <linux/sizes.h>
+
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/usb/of.h>
+
+#include <linux/debugfs.h>
+
+#include "musb_core.h"
+
+static const struct of_device_id musb_dsps_of_match[];
+
+/*
+ * DSPS musb wrapper register offset.
+ * FIXME: This should be expanded to have all the wrapper registers from TI DSPS
+ * musb ips.
+ */
+struct dsps_musb_wrapper {
+	u16	revision;
+	u16	control;
+	u16	status;
+	u16	epintr_set;
+	u16	epintr_clear;
+	u16	epintr_status;
+	u16	coreintr_set;
+	u16	coreintr_clear;
+	u16	coreintr_status;
+	u16	phy_utmi;
+	u16	mode;
+	u16	tx_mode;
+	u16	rx_mode;
+
+	/* bit positions for control */
+	unsigned	reset:5;
+
+	/* bit positions for interrupt */
+	unsigned	usb_shift:5;
+	u32		usb_mask;
+	u32		usb_bitmap;
+	unsigned	drvvbus:5;
+
+	unsigned	txep_shift:5;
+	u32		txep_mask;
+	u32		txep_bitmap;
+
+	unsigned	rxep_shift:5;
+	u32		rxep_mask;
+	u32		rxep_bitmap;
+
+	/* bit positions for phy_utmi */
+	unsigned	otg_disable:5;
+
+	/* bit positions for mode */
+	unsigned	iddig:5;
+	unsigned	iddig_mux:5;
+	/* miscellaneous stuff */
+	unsigned	poll_timeout;
+};
+
+/*
+ * register shadow for suspend
+ */
+struct dsps_context {
+	u32 control;
+	u32 epintr;
+	u32 coreintr;
+	u32 phy_utmi;
+	u32 mode;
+	u32 tx_mode;
+	u32 rx_mode;
+};
+
+/*
+ * DSPS glue structure.
+ */
+struct dsps_glue {
+	struct device *dev;
+	struct platform_device *musb;	/* child musb pdev */
+	const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
+	int vbus_irq;			/* optional vbus irq */
+	unsigned long last_timer;    /* last timer data for each instance */
+	bool sw_babble_enabled;
+	void __iomem *usbss_base;
+
+	struct dsps_context context;
+	struct debugfs_regset32 regset;
+	struct dentry *dbgfs_root;
+};
+
+static const struct debugfs_reg32 dsps_musb_regs[] = {
+	{ "revision",		0x00 },
+	{ "control",		0x14 },
+	{ "status",		0x18 },
+	{ "eoi",		0x24 },
+	{ "intr0_stat",		0x30 },
+	{ "intr1_stat",		0x34 },
+	{ "intr0_set",		0x38 },
+	{ "intr1_set",		0x3c },
+	{ "txmode",		0x70 },
+	{ "rxmode",		0x74 },
+	{ "autoreq",		0xd0 },
+	{ "srpfixtime",		0xd4 },
+	{ "tdown",		0xd8 },
+	{ "phy_utmi",		0xe0 },
+	{ "mode",		0xe8 },
+};
+
+static void dsps_mod_timer(struct dsps_glue *glue, int wait_ms)
+{
+	struct musb *musb = platform_get_drvdata(glue->musb);
+	int wait;
+
+	if (wait_ms < 0)
+		wait = msecs_to_jiffies(glue->wrp->poll_timeout);
+	else
+		wait = msecs_to_jiffies(wait_ms);
+
+	mod_timer(&musb->dev_timer, jiffies + wait);
+}
+
+/*
+ * If no vbus irq from the PMIC is configured, we need to poll VBUS status.
+ */
+static void dsps_mod_timer_optional(struct dsps_glue *glue)
+{
+	if (glue->vbus_irq)
+		return;
+
+	dsps_mod_timer(glue, -1);
+}
+
+/* USBSS  / USB AM335x */
+#define USBSS_IRQ_STATUS	0x28
+#define USBSS_IRQ_ENABLER	0x2c
+#define USBSS_IRQ_CLEARR	0x30
+
+#define USBSS_IRQ_PD_COMP	(1 << 2)
+
+/*
+ * dsps_musb_enable - enable interrupts
+ */
+static void dsps_musb_enable(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	void __iomem *reg_base = musb->ctrl_base;
+	u32 epmask, coremask;
+
+	/* Workaround: setup IRQs through both register sets. */
+	epmask = ((musb->epmask & wrp->txep_mask) << wrp->txep_shift) |
+	       ((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift);
+	coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF);
+
+	musb_writel(reg_base, wrp->epintr_set, epmask);
+	musb_writel(reg_base, wrp->coreintr_set, coremask);
+	/*
+	 * start polling for runtime PM active and idle,
+	 * and for ID change in dual-role idle mode.
+	 */
+	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE)
+		dsps_mod_timer(glue, -1);
+}
+
+/*
+ * dsps_musb_disable - disable HDRC and flush interrupts
+ */
+static void dsps_musb_disable(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	void __iomem *reg_base = musb->ctrl_base;
+
+	musb_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
+	musb_writel(reg_base, wrp->epintr_clear,
+			 wrp->txep_bitmap | wrp->rxep_bitmap);
+	del_timer_sync(&musb->dev_timer);
+}
+
+/* Caller must take musb->lock */
+static int dsps_check_status(struct musb *musb, void *unused)
+{
+	void __iomem *mregs = musb->mregs;
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	u8 devctl;
+	int skip_session = 0;
+
+	if (glue->vbus_irq)
+		del_timer(&musb->dev_timer);
+
+	/*
+	 * We poll because DSPS IP's won't expose several OTG-critical
+	 * status change events (from the transceiver) otherwise.
+	 */
+	devctl = musb_readb(mregs, MUSB_DEVCTL);
+	dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
+				usb_otg_state_string(musb->xceiv->otg->state));
+
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_A_WAIT_VRISE:
+		if (musb->port_mode == MUSB_HOST) {
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
+			dsps_mod_timer_optional(glue);
+			break;
+		}
+		fallthrough;
+
+	case OTG_STATE_A_WAIT_BCON:
+		/* keep VBUS on for host-only mode */
+		if (musb->port_mode == MUSB_HOST) {
+			dsps_mod_timer_optional(glue);
+			break;
+		}
+		musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+		skip_session = 1;
+		fallthrough;
+
+	case OTG_STATE_A_IDLE:
+	case OTG_STATE_B_IDLE:
+		if (!glue->vbus_irq) {
+			if (devctl & MUSB_DEVCTL_BDEVICE) {
+				musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+				MUSB_DEV_MODE(musb);
+			} else {
+				musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+				MUSB_HST_MODE(musb);
+			}
+
+			if (musb->port_mode == MUSB_PERIPHERAL)
+				skip_session = 1;
+
+			if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
+				musb_writeb(mregs, MUSB_DEVCTL,
+					    MUSB_DEVCTL_SESSION);
+		}
+		dsps_mod_timer_optional(glue);
+		break;
+	case OTG_STATE_A_WAIT_VFALL:
+		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+		musb_writel(musb->ctrl_base, wrp->coreintr_set,
+			    MUSB_INTR_VBUSERROR << wrp->usb_shift);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static void otg_timer(struct timer_list *t)
+{
+	struct musb *musb = from_timer(musb, t, dev_timer);
+	struct device *dev = musb->controller;
+	unsigned long flags;
+	int err;
+
+	err = pm_runtime_get(dev);
+	if ((err != -EINPROGRESS) && err < 0) {
+		dev_err(dev, "Poll could not pm_runtime_get: %i\n", err);
+		pm_runtime_put_noidle(dev);
+
+		return;
+	}
+
+	spin_lock_irqsave(&musb->lock, flags);
+	err = musb_queue_resume_work(musb, dsps_check_status, NULL);
+	if (err < 0)
+		dev_err(dev, "%s resume work: %i\n", __func__, err);
+	spin_unlock_irqrestore(&musb->lock, flags);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+}
+
+static void dsps_musb_clear_ep_rxintr(struct musb *musb, int epnum)
+{
+	u32 epintr;
+	struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+
+	/* musb->lock might already been held */
+	epintr = (1 << epnum) << wrp->rxep_shift;
+	musb_writel(musb->ctrl_base, wrp->epintr_status, epintr);
+}
+
+static irqreturn_t dsps_interrupt(int irq, void *hci)
+{
+	struct musb  *musb = hci;
+	void __iomem *reg_base = musb->ctrl_base;
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	unsigned long flags;
+	irqreturn_t ret = IRQ_NONE;
+	u32 epintr, usbintr;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	/* Get endpoint interrupts */
+	epintr = musb_readl(reg_base, wrp->epintr_status);
+	musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift;
+	musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift;
+
+	if (epintr)
+		musb_writel(reg_base, wrp->epintr_status, epintr);
+
+	/* Get usb core interrupts */
+	usbintr = musb_readl(reg_base, wrp->coreintr_status);
+	if (!usbintr && !epintr)
+		goto out;
+
+	musb->int_usb =	(usbintr & wrp->usb_bitmap) >> wrp->usb_shift;
+	if (usbintr)
+		musb_writel(reg_base, wrp->coreintr_status, usbintr);
+
+	dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
+			usbintr, epintr);
+
+	if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
+		int drvvbus = musb_readl(reg_base, wrp->status);
+		void __iomem *mregs = musb->mregs;
+		u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
+		int err;
+
+		err = musb->int_usb & MUSB_INTR_VBUSERROR;
+		if (err) {
+			/*
+			 * The Mentor core doesn't debounce VBUS as needed
+			 * to cope with device connect current spikes. This
+			 * means it's not uncommon for bus-powered devices
+			 * to get VBUS errors during enumeration.
+			 *
+			 * This is a workaround, but newer RTL from Mentor
+			 * seems to allow a better one: "re"-starting sessions
+			 * without waiting for VBUS to stop registering in
+			 * devctl.
+			 */
+			musb->int_usb &= ~MUSB_INTR_VBUSERROR;
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
+			dsps_mod_timer_optional(glue);
+			WARNING("VBUS error workaround (delay coming)\n");
+		} else if (drvvbus) {
+			MUSB_HST_MODE(musb);
+			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+			dsps_mod_timer_optional(glue);
+		} else {
+			musb->is_active = 0;
+			MUSB_DEV_MODE(musb);
+			musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+		}
+
+		/* NOTE: this must complete power-on within 100 ms. */
+		dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
+				drvvbus ? "on" : "off",
+				usb_otg_state_string(musb->xceiv->otg->state),
+				err ? " ERROR" : "",
+				devctl);
+		ret = IRQ_HANDLED;
+	}
+
+	if (musb->int_tx || musb->int_rx || musb->int_usb)
+		ret |= musb_interrupt(musb);
+
+	/* Poll for ID change and connect */
+	switch (musb->xceiv->otg->state) {
+	case OTG_STATE_B_IDLE:
+	case OTG_STATE_A_WAIT_BCON:
+		dsps_mod_timer_optional(glue);
+		break;
+	default:
+		break;
+	}
+
+out:
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return ret;
+}
+
+static int dsps_musb_dbg_init(struct musb *musb, struct dsps_glue *glue)
+{
+	struct dentry *root;
+	char buf[128];
+
+	sprintf(buf, "%s.dsps", dev_name(musb->controller));
+	root = debugfs_create_dir(buf, usb_debug_root);
+	glue->dbgfs_root = root;
+
+	glue->regset.regs = dsps_musb_regs;
+	glue->regset.nregs = ARRAY_SIZE(dsps_musb_regs);
+	glue->regset.base = musb->ctrl_base;
+
+	debugfs_create_regset32("regdump", S_IRUGO, root, &glue->regset);
+	return 0;
+}
+
+static int dsps_musb_init(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	struct platform_device *parent = to_platform_device(dev->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	void __iomem *reg_base;
+	struct resource *r;
+	u32 rev, val;
+	int ret;
+
+	r = platform_get_resource_byname(parent, IORESOURCE_MEM, "control");
+	reg_base = devm_ioremap_resource(dev, r);
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+	musb->ctrl_base = reg_base;
+
+	/* NOP driver needs change if supporting dual instance */
+	musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "phys", 0);
+	if (IS_ERR(musb->xceiv))
+		return PTR_ERR(musb->xceiv);
+
+	musb->phy = devm_phy_get(dev->parent, "usb2-phy");
+
+	/* Returns zero if e.g. not clocked */
+	rev = musb_readl(reg_base, wrp->revision);
+	if (!rev)
+		return -ENODEV;
+
+	if (IS_ERR(musb->phy))  {
+		musb->phy = NULL;
+	} else {
+		ret = phy_init(musb->phy);
+		if (ret < 0)
+			return ret;
+		ret = phy_power_on(musb->phy);
+		if (ret) {
+			phy_exit(musb->phy);
+			return ret;
+		}
+	}
+
+	timer_setup(&musb->dev_timer, otg_timer, 0);
+
+	/* Reset the musb */
+	musb_writel(reg_base, wrp->control, (1 << wrp->reset));
+
+	musb->isr = dsps_interrupt;
+
+	/* reset the otgdisable bit, needed for host mode to work */
+	val = musb_readl(reg_base, wrp->phy_utmi);
+	val &= ~(1 << wrp->otg_disable);
+	musb_writel(musb->ctrl_base, wrp->phy_utmi, val);
+
+	/*
+	 *  Check whether the dsps version has babble control enabled.
+	 * In latest silicon revision the babble control logic is enabled.
+	 * If MUSB_BABBLE_CTL returns 0x4 then we have the babble control
+	 * logic enabled.
+	 */
+	val = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
+	if (val & MUSB_BABBLE_RCV_DISABLE) {
+		glue->sw_babble_enabled = true;
+		val |= MUSB_BABBLE_SW_SESSION_CTRL;
+		musb_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
+	}
+
+	dsps_mod_timer(glue, -1);
+
+	return dsps_musb_dbg_init(musb, glue);
+}
+
+static int dsps_musb_exit(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+
+	del_timer_sync(&musb->dev_timer);
+	phy_power_off(musb->phy);
+	phy_exit(musb->phy);
+	debugfs_remove_recursive(glue->dbgfs_root);
+
+	return 0;
+}
+
+static int dsps_musb_set_mode(struct musb *musb, u8 mode)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	void __iomem *ctrl_base = musb->ctrl_base;
+	u32 reg;
+
+	reg = musb_readl(ctrl_base, wrp->mode);
+
+	switch (mode) {
+	case MUSB_HOST:
+		reg &= ~(1 << wrp->iddig);
+
+		/*
+		 * if we're setting mode to host-only or device-only, we're
+		 * going to ignore whatever the PHY sends us and just force
+		 * ID pin status by SW
+		 */
+		reg |= (1 << wrp->iddig_mux);
+
+		musb_writel(ctrl_base, wrp->mode, reg);
+		musb_writel(ctrl_base, wrp->phy_utmi, 0x02);
+		break;
+	case MUSB_PERIPHERAL:
+		reg |= (1 << wrp->iddig);
+
+		/*
+		 * if we're setting mode to host-only or device-only, we're
+		 * going to ignore whatever the PHY sends us and just force
+		 * ID pin status by SW
+		 */
+		reg |= (1 << wrp->iddig_mux);
+
+		musb_writel(ctrl_base, wrp->mode, reg);
+		break;
+	case MUSB_OTG:
+		musb_writel(ctrl_base, wrp->phy_utmi, 0x02);
+		break;
+	default:
+		dev_err(glue->dev, "unsupported mode %d\n", mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static bool dsps_sw_babble_control(struct musb *musb)
+{
+	u8 babble_ctl;
+	bool session_restart =  false;
+
+	babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
+	dev_dbg(musb->controller, "babble: MUSB_BABBLE_CTL value %x\n",
+		babble_ctl);
+	/*
+	 * check line monitor flag to check whether babble is
+	 * due to noise
+	 */
+	dev_dbg(musb->controller, "STUCK_J is %s\n",
+		babble_ctl & MUSB_BABBLE_STUCK_J ? "set" : "reset");
+
+	if (babble_ctl & MUSB_BABBLE_STUCK_J) {
+		int timeout = 10;
+
+		/*
+		 * babble is due to noise, then set transmit idle (d7 bit)
+		 * to resume normal operation
+		 */
+		babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
+		babble_ctl |= MUSB_BABBLE_FORCE_TXIDLE;
+		musb_writeb(musb->mregs, MUSB_BABBLE_CTL, babble_ctl);
+
+		/* wait till line monitor flag cleared */
+		dev_dbg(musb->controller, "Set TXIDLE, wait J to clear\n");
+		do {
+			babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
+			udelay(1);
+		} while ((babble_ctl & MUSB_BABBLE_STUCK_J) && timeout--);
+
+		/* check whether stuck_at_j bit cleared */
+		if (babble_ctl & MUSB_BABBLE_STUCK_J) {
+			/*
+			 * real babble condition has occurred
+			 * restart the controller to start the
+			 * session again
+			 */
+			dev_dbg(musb->controller, "J not cleared, misc (%x)\n",
+				babble_ctl);
+			session_restart = true;
+		}
+	} else {
+		session_restart = true;
+	}
+
+	return session_restart;
+}
+
+static int dsps_musb_recover(struct musb *musb)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	int session_restart = 0;
+
+	if (glue->sw_babble_enabled)
+		session_restart = dsps_sw_babble_control(musb);
+	else
+		session_restart = 1;
+
+	return session_restart ? 0 : -EPIPE;
+}
+
+/* Similar to am35x, dm81xx support only 32-bit read operation */
+static void dsps_read_fifo32(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
+{
+	void __iomem *fifo = hw_ep->fifo;
+
+	if (len >= 4) {
+		ioread32_rep(fifo, dst, len >> 2);
+		dst += len & ~0x03;
+		len &= 0x03;
+	}
+
+	/* Read any remaining 1 to 3 bytes */
+	if (len > 0) {
+		u32 val = musb_readl(fifo, 0);
+		memcpy(dst, &val, len);
+	}
+}
+
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+static void dsps_dma_controller_callback(struct dma_controller *c)
+{
+	struct musb *musb = c->musb;
+	struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
+	void __iomem *usbss_base = glue->usbss_base;
+	u32 status;
+
+	status = musb_readl(usbss_base, USBSS_IRQ_STATUS);
+	if (status & USBSS_IRQ_PD_COMP)
+		musb_writel(usbss_base, USBSS_IRQ_STATUS, USBSS_IRQ_PD_COMP);
+}
+
+static struct dma_controller *
+dsps_dma_controller_create(struct musb *musb, void __iomem *base)
+{
+	struct dma_controller *controller;
+	struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
+	void __iomem *usbss_base = glue->usbss_base;
+
+	controller = cppi41_dma_controller_create(musb, base);
+	if (IS_ERR_OR_NULL(controller))
+		return controller;
+
+	musb_writel(usbss_base, USBSS_IRQ_ENABLER, USBSS_IRQ_PD_COMP);
+	controller->dma_callback = dsps_dma_controller_callback;
+
+	return controller;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void dsps_dma_controller_suspend(struct dsps_glue *glue)
+{
+	void __iomem *usbss_base = glue->usbss_base;
+
+	musb_writel(usbss_base, USBSS_IRQ_CLEARR, USBSS_IRQ_PD_COMP);
+}
+
+static void dsps_dma_controller_resume(struct dsps_glue *glue)
+{
+	void __iomem *usbss_base = glue->usbss_base;
+
+	musb_writel(usbss_base, USBSS_IRQ_ENABLER, USBSS_IRQ_PD_COMP);
+}
+#endif
+#else /* CONFIG_USB_TI_CPPI41_DMA */
+#ifdef CONFIG_PM_SLEEP
+static void dsps_dma_controller_suspend(struct dsps_glue *glue) {}
+static void dsps_dma_controller_resume(struct dsps_glue *glue) {}
+#endif
+#endif /* CONFIG_USB_TI_CPPI41_DMA */
+
+static struct musb_platform_ops dsps_ops = {
+	.quirks		= MUSB_DMA_CPPI41 | MUSB_INDEXED_EP,
+	.init		= dsps_musb_init,
+	.exit		= dsps_musb_exit,
+
+#ifdef CONFIG_USB_TI_CPPI41_DMA
+	.dma_init	= dsps_dma_controller_create,
+	.dma_exit	= cppi41_dma_controller_destroy,
+#endif
+	.enable		= dsps_musb_enable,
+	.disable	= dsps_musb_disable,
+
+	.set_mode	= dsps_musb_set_mode,
+	.recover	= dsps_musb_recover,
+	.clear_ep_rxintr = dsps_musb_clear_ep_rxintr,
+};
+
+static u64 musb_dmamask = DMA_BIT_MASK(32);
+
+static int get_int_prop(struct device_node *dn, const char *s)
+{
+	int ret;
+	u32 val;
+
+	ret = of_property_read_u32(dn, s, &val);
+	if (ret)
+		return 0;
+	return val;
+}
+
+static int dsps_create_musb_pdev(struct dsps_glue *glue,
+		struct platform_device *parent)
+{
+	struct musb_hdrc_platform_data pdata;
+	struct resource	resources[2];
+	struct resource	*res;
+	struct device *dev = &parent->dev;
+	struct musb_hdrc_config	*config;
+	struct platform_device *musb;
+	struct device_node *dn = parent->dev.of_node;
+	int ret, val;
+
+	memset(resources, 0, sizeof(resources));
+	res = platform_get_resource_byname(parent, IORESOURCE_MEM, "mc");
+	if (!res) {
+		dev_err(dev, "failed to get memory.\n");
+		return -EINVAL;
+	}
+	resources[0] = *res;
+
+	ret = platform_get_irq_byname(parent, "mc");
+	if (ret < 0)
+		return ret;
+
+	resources[1].start = ret;
+	resources[1].end = ret;
+	resources[1].flags = IORESOURCE_IRQ | irq_get_trigger_type(ret);
+	resources[1].name = "mc";
+
+	/* allocate the child platform device */
+	musb = platform_device_alloc("musb-hdrc",
+			(resources[0].start & 0xFFF) == 0x400 ? 0 : 1);
+	if (!musb) {
+		dev_err(dev, "failed to allocate musb device\n");
+		return -ENOMEM;
+	}
+
+	musb->dev.parent		= dev;
+	musb->dev.dma_mask		= &musb_dmamask;
+	musb->dev.coherent_dma_mask	= musb_dmamask;
+	device_set_of_node_from_dev(&musb->dev, &parent->dev);
+
+	glue->musb = musb;
+
+	ret = platform_device_add_resources(musb, resources,
+			ARRAY_SIZE(resources));
+	if (ret) {
+		dev_err(dev, "failed to add resources\n");
+		goto err;
+	}
+
+	config = devm_kzalloc(&parent->dev, sizeof(*config), GFP_KERNEL);
+	if (!config) {
+		ret = -ENOMEM;
+		goto err;
+	}
+	pdata.config = config;
+	pdata.platform_ops = &dsps_ops;
+
+	config->num_eps = get_int_prop(dn, "mentor,num-eps");
+	config->ram_bits = get_int_prop(dn, "mentor,ram-bits");
+	config->host_port_deassert_reset_at_resume = 1;
+	pdata.mode = musb_get_mode(dev);
+	/* DT keeps this entry in mA, musb expects it as per USB spec */
+	pdata.power = get_int_prop(dn, "mentor,power") / 2;
+
+	ret = of_property_read_u32(dn, "mentor,multipoint", &val);
+	if (!ret && val)
+		config->multipoint = true;
+
+	config->maximum_speed = usb_get_maximum_speed(&parent->dev);
+	switch (config->maximum_speed) {
+	case USB_SPEED_LOW:
+	case USB_SPEED_FULL:
+		break;
+	case USB_SPEED_SUPER:
+		dev_warn(dev, "ignore incorrect maximum_speed "
+				"(super-speed) setting in dts");
+		fallthrough;
+	default:
+		config->maximum_speed = USB_SPEED_HIGH;
+	}
+
+	ret = platform_device_add_data(musb, &pdata, sizeof(pdata));
+	if (ret) {
+		dev_err(dev, "failed to add platform_data\n");
+		goto err;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(dev, "failed to register musb device\n");
+		goto err;
+	}
+	return 0;
+
+err:
+	platform_device_put(musb);
+	return ret;
+}
+
+static irqreturn_t dsps_vbus_threaded_irq(int irq, void *priv)
+{
+	struct dsps_glue *glue = priv;
+	struct musb *musb = platform_get_drvdata(glue->musb);
+
+	if (!musb)
+		return IRQ_NONE;
+
+	dev_dbg(glue->dev, "VBUS interrupt\n");
+	dsps_mod_timer(glue, 0);
+
+	return IRQ_HANDLED;
+}
+
+static int dsps_setup_optional_vbus_irq(struct platform_device *pdev,
+					struct dsps_glue *glue)
+{
+	int error;
+
+	glue->vbus_irq = platform_get_irq_byname(pdev, "vbus");
+	if (glue->vbus_irq == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+
+	if (glue->vbus_irq <= 0) {
+		glue->vbus_irq = 0;
+		return 0;
+	}
+
+	error = devm_request_threaded_irq(glue->dev, glue->vbus_irq,
+					  NULL, dsps_vbus_threaded_irq,
+					  IRQF_ONESHOT,
+					  "vbus", glue);
+	if (error) {
+		glue->vbus_irq = 0;
+		return error;
+	}
+	dev_dbg(glue->dev, "VBUS irq %i configured\n", glue->vbus_irq);
+
+	return 0;
+}
+
+static int dsps_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	const struct dsps_musb_wrapper *wrp;
+	struct dsps_glue *glue;
+	int ret;
+
+	if (!strcmp(pdev->name, "musb-hdrc"))
+		return -ENODEV;
+
+	match = of_match_node(musb_dsps_of_match, pdev->dev.of_node);
+	if (!match) {
+		dev_err(&pdev->dev, "fail to get matching of_match struct\n");
+		return -EINVAL;
+	}
+	wrp = match->data;
+
+	if (of_device_is_compatible(pdev->dev.of_node, "ti,musb-dm816"))
+		dsps_ops.read_fifo = dsps_read_fifo32;
+
+	/* allocate glue */
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		return -ENOMEM;
+
+	glue->dev = &pdev->dev;
+	glue->wrp = wrp;
+	glue->usbss_base = of_iomap(pdev->dev.parent->of_node, 0);
+	if (!glue->usbss_base)
+		return -ENXIO;
+
+	platform_set_drvdata(pdev, glue);
+	pm_runtime_enable(&pdev->dev);
+	ret = dsps_create_musb_pdev(glue, pdev);
+	if (ret)
+		goto err;
+
+	if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) {
+		ret = dsps_setup_optional_vbus_irq(pdev, glue);
+		if (ret)
+			goto unregister_pdev;
+	}
+
+	return 0;
+
+unregister_pdev:
+	platform_device_unregister(glue->musb);
+err:
+	pm_runtime_disable(&pdev->dev);
+	iounmap(glue->usbss_base);
+	return ret;
+}
+
+static int dsps_remove(struct platform_device *pdev)
+{
+	struct dsps_glue *glue = platform_get_drvdata(pdev);
+
+	platform_device_unregister(glue->musb);
+
+	pm_runtime_disable(&pdev->dev);
+	iounmap(glue->usbss_base);
+
+	return 0;
+}
+
+static const struct dsps_musb_wrapper am33xx_driver_data = {
+	.revision		= 0x00,
+	.control		= 0x14,
+	.status			= 0x18,
+	.epintr_set		= 0x38,
+	.epintr_clear		= 0x40,
+	.epintr_status		= 0x30,
+	.coreintr_set		= 0x3c,
+	.coreintr_clear		= 0x44,
+	.coreintr_status	= 0x34,
+	.phy_utmi		= 0xe0,
+	.mode			= 0xe8,
+	.tx_mode		= 0x70,
+	.rx_mode		= 0x74,
+	.reset			= 0,
+	.otg_disable		= 21,
+	.iddig			= 8,
+	.iddig_mux		= 7,
+	.usb_shift		= 0,
+	.usb_mask		= 0x1ff,
+	.usb_bitmap		= (0x1ff << 0),
+	.drvvbus		= 8,
+	.txep_shift		= 0,
+	.txep_mask		= 0xffff,
+	.txep_bitmap		= (0xffff << 0),
+	.rxep_shift		= 16,
+	.rxep_mask		= 0xfffe,
+	.rxep_bitmap		= (0xfffe << 16),
+	.poll_timeout		= 2000, /* ms */
+};
+
+static const struct of_device_id musb_dsps_of_match[] = {
+	{ .compatible = "ti,musb-am33xx",
+		.data = &am33xx_driver_data, },
+	{ .compatible = "ti,musb-dm816",
+		.data = &am33xx_driver_data, },
+	{  },
+};
+MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
+
+#ifdef CONFIG_PM_SLEEP
+static int dsps_suspend(struct device *dev)
+{
+	struct dsps_glue *glue = dev_get_drvdata(dev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	struct musb *musb = platform_get_drvdata(glue->musb);
+	void __iomem *mbase;
+	int ret;
+
+	if (!musb)
+		/* This can happen if the musb device is in -EPROBE_DEFER */
+		return 0;
+
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(dev);
+		return ret;
+	}
+
+	del_timer_sync(&musb->dev_timer);
+
+	mbase = musb->ctrl_base;
+	glue->context.control = musb_readl(mbase, wrp->control);
+	glue->context.epintr = musb_readl(mbase, wrp->epintr_set);
+	glue->context.coreintr = musb_readl(mbase, wrp->coreintr_set);
+	glue->context.phy_utmi = musb_readl(mbase, wrp->phy_utmi);
+	glue->context.mode = musb_readl(mbase, wrp->mode);
+	glue->context.tx_mode = musb_readl(mbase, wrp->tx_mode);
+	glue->context.rx_mode = musb_readl(mbase, wrp->rx_mode);
+
+	dsps_dma_controller_suspend(glue);
+
+	return 0;
+}
+
+static int dsps_resume(struct device *dev)
+{
+	struct dsps_glue *glue = dev_get_drvdata(dev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	struct musb *musb = platform_get_drvdata(glue->musb);
+	void __iomem *mbase;
+
+	if (!musb)
+		return 0;
+
+	dsps_dma_controller_resume(glue);
+
+	mbase = musb->ctrl_base;
+	musb_writel(mbase, wrp->control, glue->context.control);
+	musb_writel(mbase, wrp->epintr_set, glue->context.epintr);
+	musb_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
+	musb_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi);
+	musb_writel(mbase, wrp->mode, glue->context.mode);
+	musb_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
+	musb_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
+	if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
+	    musb->port_mode == MUSB_OTG)
+		dsps_mod_timer(glue, -1);
+
+	pm_runtime_put(dev);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume);
+
+static struct platform_driver dsps_usbss_driver = {
+	.probe		= dsps_probe,
+	.remove         = dsps_remove,
+	.driver         = {
+		.name   = "musb-dsps",
+		.pm	= &dsps_pm_ops,
+		.of_match_table	= musb_dsps_of_match,
+	},
+};
+
+MODULE_DESCRIPTION("TI DSPS MUSB Glue Layer");
+MODULE_AUTHOR("Ravi B <ravibabu@ti.com>");
+MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+module_platform_driver(dsps_usbss_driver);