Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

8 files changed, 9645 insertions, 0 deletions

diff --git a/fs/jbd2/Kconfig b/fs/jbd2/Kconfig
new file mode 100644
index 000000000..4ad2c67f9
--- /dev/null
+++ b/fs/jbd2/Kconfig
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config JBD2
+	tristate
+	select CRC32
+	select CRYPTO
+	select CRYPTO_CRC32C
+	help
+	  This is a generic journaling layer for block devices that support
+	  both 32-bit and 64-bit block numbers.  It is currently used by
+	  the ext4 and OCFS2 filesystems, but it could also be used to add
+	  journal support to other file systems or block devices such
+	  as RAID or LVM.
+
+	  If you are using ext4 or OCFS2, you need to say Y here.
+	  If you are not using ext4 or OCFS2 then you will
+	  probably want to say N.
+
+	  To compile this device as a module, choose M here. The module will be
+	  called jbd2.  If you are compiling ext4 or OCFS2 into the kernel,
+	  you cannot compile this code as a module.
+
+config JBD2_DEBUG
+	bool "JBD2 (ext4) debugging support"
+	depends on JBD2
+	help
+	  If you are using the ext4 journaled file system (or
+	  potentially any other filesystem/device using JBD2), this option
+	  allows you to enable debugging output while the system is running,
+	  in order to help track down any problems you are having.
+	  By default, the debugging output will be turned off.
+
+	  If you select Y here, then you will be able to turn on debugging
+	  with "echo N > /sys/module/jbd2/parameters/jbd2_debug", where N is a
+	  number between 1 and 5. The higher the number, the more debugging
+	  output is generated.  To turn debugging off again, do
+	  "echo 0 > /sys/module/jbd2/parameters/jbd2_debug".
diff --git a/fs/jbd2/Makefile b/fs/jbd2/Makefile
new file mode 100644
index 000000000..126b4da6c
--- /dev/null
+++ b/fs/jbd2/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the linux journaling routines.
+#
+
+obj-$(CONFIG_JBD2) += jbd2.o
+
+jbd2-objs := transaction.o commit.o recovery.o checkpoint.o revoke.o journal.o
diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
new file mode 100644
index 000000000..f033ac807
--- /dev/null
+++ b/fs/jbd2/checkpoint.c
@@ -0,0 +1,729 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * linux/fs/jbd2/checkpoint.c
+ *
+ * Written by Stephen C. Tweedie <sct@redhat.com>, 1999
+ *
+ * Copyright 1999 Red Hat Software --- All Rights Reserved
+ *
+ * Checkpoint routines for the generic filesystem journaling code.
+ * Part of the ext2fs journaling system.
+ *
+ * Checkpointing is the process of ensuring that a section of the log is
+ * committed fully to disk, so that that portion of the log can be
+ * reused.
+ */
+
+#include <linux/time.h>
+#include <linux/fs.h>
+#include <linux/jbd2.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
+#include <trace/events/jbd2.h>
+
+/*
+ * Unlink a buffer from a transaction checkpoint list.
+ *
+ * Called with j_list_lock held.
+ */
+static inline void __buffer_unlink(struct journal_head *jh)
+{
+	transaction_t *transaction = jh->b_cp_transaction;
+
+	jh->b_cpnext->b_cpprev = jh->b_cpprev;
+	jh->b_cpprev->b_cpnext = jh->b_cpnext;
+	if (transaction->t_checkpoint_list == jh) {
+		transaction->t_checkpoint_list = jh->b_cpnext;
+		if (transaction->t_checkpoint_list == jh)
+			transaction->t_checkpoint_list = NULL;
+	}
+}
+
+/*
+ * Check a checkpoint buffer could be release or not.
+ *
+ * Requires j_list_lock
+ */
+static inline bool __cp_buffer_busy(struct journal_head *jh)
+{
+	struct buffer_head *bh = jh2bh(jh);
+
+	return (jh->b_transaction || buffer_locked(bh) || buffer_dirty(bh));
+}
+
+/*
+ * __jbd2_log_wait_for_space: wait until there is space in the journal.
+ *
+ * Called under j-state_lock *only*.  It will be unlocked if we have to wait
+ * for a checkpoint to free up some space in the log.
+ */
+void __jbd2_log_wait_for_space(journal_t *journal)
+__acquires(&journal->j_state_lock)
+__releases(&journal->j_state_lock)
+{
+	int nblocks, space_left;
+	/* assert_spin_locked(&journal->j_state_lock); */
+
+	nblocks = journal->j_max_transaction_buffers;
+	while (jbd2_log_space_left(journal) < nblocks) {
+		write_unlock(&journal->j_state_lock);
+		mutex_lock_io(&journal->j_checkpoint_mutex);
+
+		/*
+		 * Test again, another process may have checkpointed while we
+		 * were waiting for the checkpoint lock. If there are no
+		 * transactions ready to be checkpointed, try to recover
+		 * journal space by calling cleanup_journal_tail(), and if
+		 * that doesn't work, by waiting for the currently committing
+		 * transaction to complete.  If there is absolutely no way
+		 * to make progress, this is either a BUG or corrupted
+		 * filesystem, so abort the journal and leave a stack
+		 * trace for forensic evidence.
+		 */
+		write_lock(&journal->j_state_lock);
+		if (journal->j_flags & JBD2_ABORT) {
+			mutex_unlock(&journal->j_checkpoint_mutex);
+			return;
+		}
+		spin_lock(&journal->j_list_lock);
+		space_left = jbd2_log_space_left(journal);
+		if (space_left < nblocks) {
+			int chkpt = journal->j_checkpoint_transactions != NULL;
+			tid_t tid = 0;
+
+			if (journal->j_committing_transaction)
+				tid = journal->j_committing_transaction->t_tid;
+			spin_unlock(&journal->j_list_lock);
+			write_unlock(&journal->j_state_lock);
+			if (chkpt) {
+				jbd2_log_do_checkpoint(journal);
+			} else if (jbd2_cleanup_journal_tail(journal) == 0) {
+				/* We were able to recover space; yay! */
+				;
+			} else if (tid) {
+				/*
+				 * jbd2_journal_commit_transaction() may want
+				 * to take the checkpoint_mutex if JBD2_FLUSHED
+				 * is set.  So we need to temporarily drop it.
+				 */
+				mutex_unlock(&journal->j_checkpoint_mutex);
+				jbd2_log_wait_commit(journal, tid);
+				write_lock(&journal->j_state_lock);
+				continue;
+			} else {
+				printk(KERN_ERR "%s: needed %d blocks and "
+				       "only had %d space available\n",
+				       __func__, nblocks, space_left);
+				printk(KERN_ERR "%s: no way to get more "
+				       "journal space in %s\n", __func__,
+				       journal->j_devname);
+				WARN_ON(1);
+				jbd2_journal_abort(journal, -EIO);
+			}
+			write_lock(&journal->j_state_lock);
+		} else {
+			spin_unlock(&journal->j_list_lock);
+		}
+		mutex_unlock(&journal->j_checkpoint_mutex);
+	}
+}
+
+static void
+__flush_batch(journal_t *journal, int *batch_count)
+{
+	int i;
+	struct blk_plug plug;
+
+	blk_start_plug(&plug);
+	for (i = 0; i < *batch_count; i++)
+		write_dirty_buffer(journal->j_chkpt_bhs[i], REQ_SYNC);
+	blk_finish_plug(&plug);
+
+	for (i = 0; i < *batch_count; i++) {
+		struct buffer_head *bh = journal->j_chkpt_bhs[i];
+		BUFFER_TRACE(bh, "brelse");
+		__brelse(bh);
+		journal->j_chkpt_bhs[i] = NULL;
+	}
+	*batch_count = 0;
+}
+
+/*
+ * Perform an actual checkpoint. We take the first transaction on the
+ * list of transactions to be checkpointed and send all its buffers
+ * to disk. We submit larger chunks of data at once.
+ *
+ * The journal should be locked before calling this function.
+ * Called with j_checkpoint_mutex held.
+ */
+int jbd2_log_do_checkpoint(journal_t *journal)
+{
+	struct journal_head	*jh;
+	struct buffer_head	*bh;
+	transaction_t		*transaction;
+	tid_t			this_tid;
+	int			result, batch_count = 0;
+
+	jbd2_debug(1, "Start checkpoint\n");
+
+	/*
+	 * First thing: if there are any transactions in the log which
+	 * don't need checkpointing, just eliminate them from the
+	 * journal straight away.
+	 */
+	result = jbd2_cleanup_journal_tail(journal);
+	trace_jbd2_checkpoint(journal, result);
+	jbd2_debug(1, "cleanup_journal_tail returned %d\n", result);
+	if (result <= 0)
+		return result;
+
+	/*
+	 * OK, we need to start writing disk blocks.  Take one transaction
+	 * and write it.
+	 */
+	spin_lock(&journal->j_list_lock);
+	if (!journal->j_checkpoint_transactions)
+		goto out;
+	transaction = journal->j_checkpoint_transactions;
+	if (transaction->t_chp_stats.cs_chp_time == 0)
+		transaction->t_chp_stats.cs_chp_time = jiffies;
+	this_tid = transaction->t_tid;
+restart:
+	/*
+	 * If someone cleaned up this transaction while we slept, we're
+	 * done (maybe it's a new transaction, but it fell at the same
+	 * address).
+	 */
+	if (journal->j_checkpoint_transactions != transaction ||
+	    transaction->t_tid != this_tid)
+		goto out;
+
+	/* checkpoint all of the transaction's buffers */
+	while (transaction->t_checkpoint_list) {
+		jh = transaction->t_checkpoint_list;
+		bh = jh2bh(jh);
+
+		if (jh->b_transaction != NULL) {
+			transaction_t *t = jh->b_transaction;
+			tid_t tid = t->t_tid;
+
+			transaction->t_chp_stats.cs_forced_to_close++;
+			spin_unlock(&journal->j_list_lock);
+			if (unlikely(journal->j_flags & JBD2_UNMOUNT))
+				/*
+				 * The journal thread is dead; so
+				 * starting and waiting for a commit
+				 * to finish will cause us to wait for
+				 * a _very_ long time.
+				 */
+				printk(KERN_ERR
+		"JBD2: %s: Waiting for Godot: block %llu\n",
+		journal->j_devname, (unsigned long long) bh->b_blocknr);
+
+			if (batch_count)
+				__flush_batch(journal, &batch_count);
+			jbd2_log_start_commit(journal, tid);
+			/*
+			 * jbd2_journal_commit_transaction() may want
+			 * to take the checkpoint_mutex if JBD2_FLUSHED
+			 * is set, jbd2_update_log_tail() called by
+			 * jbd2_journal_commit_transaction() may also take
+			 * checkpoint_mutex.  So we need to temporarily
+			 * drop it.
+			 */
+			mutex_unlock(&journal->j_checkpoint_mutex);
+			jbd2_log_wait_commit(journal, tid);
+			mutex_lock_io(&journal->j_checkpoint_mutex);
+			spin_lock(&journal->j_list_lock);
+			goto restart;
+		}
+		if (!trylock_buffer(bh)) {
+			/*
+			 * The buffer is locked, it may be writing back, or
+			 * flushing out in the last couple of cycles, or
+			 * re-adding into a new transaction, need to check
+			 * it again until it's unlocked.
+			 */
+			get_bh(bh);
+			spin_unlock(&journal->j_list_lock);
+			wait_on_buffer(bh);
+			/* the journal_head may have gone by now */
+			BUFFER_TRACE(bh, "brelse");
+			__brelse(bh);
+			goto retry;
+		} else if (!buffer_dirty(bh)) {
+			unlock_buffer(bh);
+			BUFFER_TRACE(bh, "remove from checkpoint");
+			/*
+			 * If the transaction was released or the checkpoint
+			 * list was empty, we're done.
+			 */
+			if (__jbd2_journal_remove_checkpoint(jh) ||
+			    !transaction->t_checkpoint_list)
+				goto out;
+		} else {
+			unlock_buffer(bh);
+			/*
+			 * We are about to write the buffer, it could be
+			 * raced by some other transaction shrink or buffer
+			 * re-log logic once we release the j_list_lock,
+			 * leave it on the checkpoint list and check status
+			 * again to make sure it's clean.
+			 */
+			BUFFER_TRACE(bh, "queue");
+			get_bh(bh);
+			J_ASSERT_BH(bh, !buffer_jwrite(bh));
+			journal->j_chkpt_bhs[batch_count++] = bh;
+			transaction->t_chp_stats.cs_written++;
+			transaction->t_checkpoint_list = jh->b_cpnext;
+		}
+
+		if ((batch_count == JBD2_NR_BATCH) ||
+		    need_resched() || spin_needbreak(&journal->j_list_lock) ||
+		    jh2bh(transaction->t_checkpoint_list) == journal->j_chkpt_bhs[0])
+			goto unlock_and_flush;
+	}
+
+	if (batch_count) {
+		unlock_and_flush:
+			spin_unlock(&journal->j_list_lock);
+		retry:
+			if (batch_count)
+				__flush_batch(journal, &batch_count);
+			spin_lock(&journal->j_list_lock);
+			goto restart;
+	}
+
+out:
+	spin_unlock(&journal->j_list_lock);
+	result = jbd2_cleanup_journal_tail(journal);
+
+	return (result < 0) ? result : 0;
+}
+
+/*
+ * Check the list of checkpoint transactions for the journal to see if
+ * we have already got rid of any since the last update of the log tail
+ * in the journal superblock.  If so, we can instantly roll the
+ * superblock forward to remove those transactions from the log.
+ *
+ * Return <0 on error, 0 on success, 1 if there was nothing to clean up.
+ *
+ * Called with the journal lock held.
+ *
+ * This is the only part of the journaling code which really needs to be
+ * aware of transaction aborts.  Checkpointing involves writing to the
+ * main filesystem area rather than to the journal, so it can proceed
+ * even in abort state, but we must not update the super block if
+ * checkpointing may have failed.  Otherwise, we would lose some metadata
+ * buffers which should be written-back to the filesystem.
+ */
+
+int jbd2_cleanup_journal_tail(journal_t *journal)
+{
+	tid_t		first_tid;
+	unsigned long	blocknr;
+
+	if (is_journal_aborted(journal))
+		return -EIO;
+
+	if (!jbd2_journal_get_log_tail(journal, &first_tid, &blocknr))
+		return 1;
+	J_ASSERT(blocknr != 0);
+
+	/*
+	 * We need to make sure that any blocks that were recently written out
+	 * --- perhaps by jbd2_log_do_checkpoint() --- are flushed out before
+	 * we drop the transactions from the journal. It's unlikely this will
+	 * be necessary, especially with an appropriately sized journal, but we
+	 * need this to guarantee correctness.  Fortunately
+	 * jbd2_cleanup_journal_tail() doesn't get called all that often.
+	 */
+	if (journal->j_flags & JBD2_BARRIER)
+		blkdev_issue_flush(journal->j_fs_dev);
+
+	return __jbd2_update_log_tail(journal, first_tid, blocknr);
+}
+
+
+/* Checkpoint list management */
+
+enum shrink_type {SHRINK_DESTROY, SHRINK_BUSY_STOP, SHRINK_BUSY_SKIP};
+
+/*
+ * journal_shrink_one_cp_list
+ *
+ * Find all the written-back checkpoint buffers in the given list
+ * and try to release them. If the whole transaction is released, set
+ * the 'released' parameter. Return the number of released checkpointed
+ * buffers.
+ *
+ * Called with j_list_lock held.
+ */
+static unsigned long journal_shrink_one_cp_list(struct journal_head *jh,
+						enum shrink_type type,
+						bool *released)
+{
+	struct journal_head *last_jh;
+	struct journal_head *next_jh = jh;
+	unsigned long nr_freed = 0;
+	int ret;
+
+	*released = false;
+	if (!jh)
+		return 0;
+
+	last_jh = jh->b_cpprev;
+	do {
+		jh = next_jh;
+		next_jh = jh->b_cpnext;
+
+		if (type == SHRINK_DESTROY) {
+			ret = __jbd2_journal_remove_checkpoint(jh);
+		} else {
+			ret = jbd2_journal_try_remove_checkpoint(jh);
+			if (ret < 0) {
+				if (type == SHRINK_BUSY_SKIP)
+					continue;
+				break;
+			}
+		}
+
+		nr_freed++;
+		if (ret) {
+			*released = true;
+			break;
+		}
+
+		if (need_resched())
+			break;
+	} while (jh != last_jh);
+
+	return nr_freed;
+}
+
+/*
+ * jbd2_journal_shrink_checkpoint_list
+ *
+ * Find 'nr_to_scan' written-back checkpoint buffers in the journal
+ * and try to release them. Return the number of released checkpointed
+ * buffers.
+ *
+ * Called with j_list_lock held.
+ */
+unsigned long jbd2_journal_shrink_checkpoint_list(journal_t *journal,
+						  unsigned long *nr_to_scan)
+{
+	transaction_t *transaction, *last_transaction, *next_transaction;
+	bool __maybe_unused released;
+	tid_t first_tid = 0, last_tid = 0, next_tid = 0;
+	tid_t tid = 0;
+	unsigned long nr_freed = 0;
+	unsigned long freed;
+
+again:
+	spin_lock(&journal->j_list_lock);
+	if (!journal->j_checkpoint_transactions) {
+		spin_unlock(&journal->j_list_lock);
+		goto out;
+	}
+
+	/*
+	 * Get next shrink transaction, resume previous scan or start
+	 * over again. If some others do checkpoint and drop transaction
+	 * from the checkpoint list, we ignore saved j_shrink_transaction
+	 * and start over unconditionally.
+	 */
+	if (journal->j_shrink_transaction)
+		transaction = journal->j_shrink_transaction;
+	else
+		transaction = journal->j_checkpoint_transactions;
+
+	if (!first_tid)
+		first_tid = transaction->t_tid;
+	last_transaction = journal->j_checkpoint_transactions->t_cpprev;
+	next_transaction = transaction;
+	last_tid = last_transaction->t_tid;
+	do {
+		transaction = next_transaction;
+		next_transaction = transaction->t_cpnext;
+		tid = transaction->t_tid;
+
+		freed = journal_shrink_one_cp_list(transaction->t_checkpoint_list,
+						   SHRINK_BUSY_SKIP, &released);
+		nr_freed += freed;
+		(*nr_to_scan) -= min(*nr_to_scan, freed);
+		if (*nr_to_scan == 0)
+			break;
+		if (need_resched() || spin_needbreak(&journal->j_list_lock))
+			break;
+	} while (transaction != last_transaction);
+
+	if (transaction != last_transaction) {
+		journal->j_shrink_transaction = next_transaction;
+		next_tid = next_transaction->t_tid;
+	} else {
+		journal->j_shrink_transaction = NULL;
+		next_tid = 0;
+	}
+
+	spin_unlock(&journal->j_list_lock);
+	cond_resched();
+
+	if (*nr_to_scan && next_tid)
+		goto again;
+out:
+	trace_jbd2_shrink_checkpoint_list(journal, first_tid, tid, last_tid,
+					  nr_freed, next_tid);
+
+	return nr_freed;
+}
+
+/*
+ * journal_clean_checkpoint_list
+ *
+ * Find all the written-back checkpoint buffers in the journal and release them.
+ * If 'destroy' is set, release all buffers unconditionally.
+ *
+ * Called with j_list_lock held.
+ */
+void __jbd2_journal_clean_checkpoint_list(journal_t *journal, bool destroy)
+{
+	transaction_t *transaction, *last_transaction, *next_transaction;
+	enum shrink_type type;
+	bool released;
+
+	transaction = journal->j_checkpoint_transactions;
+	if (!transaction)
+		return;
+
+	type = destroy ? SHRINK_DESTROY : SHRINK_BUSY_STOP;
+	last_transaction = transaction->t_cpprev;
+	next_transaction = transaction;
+	do {
+		transaction = next_transaction;
+		next_transaction = transaction->t_cpnext;
+		journal_shrink_one_cp_list(transaction->t_checkpoint_list,
+					   type, &released);
+		/*
+		 * This function only frees up some memory if possible so we
+		 * dont have an obligation to finish processing. Bail out if
+		 * preemption requested:
+		 */
+		if (need_resched())
+			return;
+		/*
+		 * Stop scanning if we couldn't free the transaction. This
+		 * avoids pointless scanning of transactions which still
+		 * weren't checkpointed.
+		 */
+		if (!released)
+			return;
+	} while (transaction != last_transaction);
+}
+
+/*
+ * Remove buffers from all checkpoint lists as journal is aborted and we just
+ * need to free memory
+ */
+void jbd2_journal_destroy_checkpoint(journal_t *journal)
+{
+	/*
+	 * We loop because __jbd2_journal_clean_checkpoint_list() may abort
+	 * early due to a need of rescheduling.
+	 */
+	while (1) {
+		spin_lock(&journal->j_list_lock);
+		if (!journal->j_checkpoint_transactions) {
+			spin_unlock(&journal->j_list_lock);
+			break;
+		}
+		__jbd2_journal_clean_checkpoint_list(journal, true);
+		spin_unlock(&journal->j_list_lock);
+		cond_resched();
+	}
+}
+
+/*
+ * journal_remove_checkpoint: called after a buffer has been committed
+ * to disk (either by being write-back flushed to disk, or being
+ * committed to the log).
+ *
+ * We cannot safely clean a transaction out of the log until all of the
+ * buffer updates committed in that transaction have safely been stored
+ * elsewhere on disk.  To achieve this, all of the buffers in a
+ * transaction need to be maintained on the transaction's checkpoint
+ * lists until they have been rewritten, at which point this function is
+ * called to remove the buffer from the existing transaction's
+ * checkpoint lists.
+ *
+ * The function returns 1 if it frees the transaction, 0 otherwise.
+ * The function can free jh and bh.
+ *
+ * This function is called with j_list_lock held.
+ */
+int __jbd2_journal_remove_checkpoint(struct journal_head *jh)
+{
+	struct transaction_chp_stats_s *stats;
+	transaction_t *transaction;
+	journal_t *journal;
+	struct buffer_head *bh = jh2bh(jh);
+
+	JBUFFER_TRACE(jh, "entry");
+
+	transaction = jh->b_cp_transaction;
+	if (!transaction) {
+		JBUFFER_TRACE(jh, "not on transaction");
+		return 0;
+	}
+	journal = transaction->t_journal;
+
+	JBUFFER_TRACE(jh, "removing from transaction");
+
+	/*
+	 * If we have failed to write the buffer out to disk, the filesystem
+	 * may become inconsistent. We cannot abort the journal here since
+	 * we hold j_list_lock and we have to be careful about races with
+	 * jbd2_journal_destroy(). So mark the writeback IO error in the
+	 * journal here and we abort the journal later from a better context.
+	 */
+	if (buffer_write_io_error(bh))
+		set_bit(JBD2_CHECKPOINT_IO_ERROR, &journal->j_atomic_flags);
+
+	__buffer_unlink(jh);
+	jh->b_cp_transaction = NULL;
+	percpu_counter_dec(&journal->j_checkpoint_jh_count);
+	jbd2_journal_put_journal_head(jh);
+
+	/* Is this transaction empty? */
+	if (transaction->t_checkpoint_list)
+		return 0;
+
+	/*
+	 * There is one special case to worry about: if we have just pulled the
+	 * buffer off a running or committing transaction's checkpoing list,
+	 * then even if the checkpoint list is empty, the transaction obviously
+	 * cannot be dropped!
+	 *
+	 * The locking here around t_state is a bit sleazy.
+	 * See the comment at the end of jbd2_journal_commit_transaction().
+	 */
+	if (transaction->t_state != T_FINISHED)
+		return 0;
+
+	/*
+	 * OK, that was the last buffer for the transaction, we can now
+	 * safely remove this transaction from the log.
+	 */
+	stats = &transaction->t_chp_stats;
+	if (stats->cs_chp_time)
+		stats->cs_chp_time = jbd2_time_diff(stats->cs_chp_time,
+						    jiffies);
+	trace_jbd2_checkpoint_stats(journal->j_fs_dev->bd_dev,
+				    transaction->t_tid, stats);
+
+	__jbd2_journal_drop_transaction(journal, transaction);
+	jbd2_journal_free_transaction(transaction);
+	return 1;
+}
+
+/*
+ * Check the checkpoint buffer and try to remove it from the checkpoint
+ * list if it's clean. Returns -EBUSY if it is not clean, returns 1 if
+ * it frees the transaction, 0 otherwise.
+ *
+ * This function is called with j_list_lock held.
+ */
+int jbd2_journal_try_remove_checkpoint(struct journal_head *jh)
+{
+	struct buffer_head *bh = jh2bh(jh);
+
+	if (jh->b_transaction)
+		return -EBUSY;
+	if (!trylock_buffer(bh))
+		return -EBUSY;
+	if (buffer_dirty(bh)) {
+		unlock_buffer(bh);
+		return -EBUSY;
+	}
+	unlock_buffer(bh);
+
+	/*
+	 * Buffer is clean and the IO has finished (we held the buffer
+	 * lock) so the checkpoint is done. We can safely remove the
+	 * buffer from this transaction.
+	 */
+	JBUFFER_TRACE(jh, "remove from checkpoint list");
+	return __jbd2_journal_remove_checkpoint(jh);
+}
+
+/*
+ * journal_insert_checkpoint: put a committed buffer onto a checkpoint
+ * list so that we know when it is safe to clean the transaction out of
+ * the log.
+ *
+ * Called with the journal locked.
+ * Called with j_list_lock held.
+ */
+void __jbd2_journal_insert_checkpoint(struct journal_head *jh,
+			       transaction_t *transaction)
+{
+	JBUFFER_TRACE(jh, "entry");
+	J_ASSERT_JH(jh, buffer_dirty(jh2bh(jh)) || buffer_jbddirty(jh2bh(jh)));
+	J_ASSERT_JH(jh, jh->b_cp_transaction == NULL);
+
+	/* Get reference for checkpointing transaction */
+	jbd2_journal_grab_journal_head(jh2bh(jh));
+	jh->b_cp_transaction = transaction;
+
+	if (!transaction->t_checkpoint_list) {
+		jh->b_cpnext = jh->b_cpprev = jh;
+	} else {
+		jh->b_cpnext = transaction->t_checkpoint_list;
+		jh->b_cpprev = transaction->t_checkpoint_list->b_cpprev;
+		jh->b_cpprev->b_cpnext = jh;
+		jh->b_cpnext->b_cpprev = jh;
+	}
+	transaction->t_checkpoint_list = jh;
+	percpu_counter_inc(&transaction->t_journal->j_checkpoint_jh_count);
+}
+
+/*
+ * We've finished with this transaction structure: adios...
+ *
+ * The transaction must have no links except for the checkpoint by this
+ * point.
+ *
+ * Called with the journal locked.
+ * Called with j_list_lock held.
+ */
+
+void __jbd2_journal_drop_transaction(journal_t *journal, transaction_t *transaction)
+{
+	assert_spin_locked(&journal->j_list_lock);
+
+	journal->j_shrink_transaction = NULL;
+	if (transaction->t_cpnext) {
+		transaction->t_cpnext->t_cpprev = transaction->t_cpprev;
+		transaction->t_cpprev->t_cpnext = transaction->t_cpnext;
+		if (journal->j_checkpoint_transactions == transaction)
+			journal->j_checkpoint_transactions =
+				transaction->t_cpnext;
+		if (journal->j_checkpoint_transactions == transaction)
+			journal->j_checkpoint_transactions = NULL;
+	}
+
+	J_ASSERT(transaction->t_state == T_FINISHED);
+	J_ASSERT(transaction->t_buffers == NULL);
+	J_ASSERT(transaction->t_forget == NULL);
+	J_ASSERT(transaction->t_shadow_list == NULL);
+	J_ASSERT(transaction->t_checkpoint_list == NULL);
+	J_ASSERT(atomic_read(&transaction->t_updates) == 0);
+	J_ASSERT(journal->j_committing_transaction != transaction);
+	J_ASSERT(journal->j_running_transaction != transaction);
+
+	trace_jbd2_drop_transaction(journal, transaction);
+
+	jbd2_debug(1, "Dropping transaction %d, all done\n", transaction->t_tid);
+}
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
new file mode 100644
index 000000000..556b259a0
--- /dev/null
+++ b/fs/jbd2/commit.c
@@ -0,0 +1,1201 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * linux/fs/jbd2/commit.c
+ *
+ * Written by Stephen C. Tweedie <sct@redhat.com>, 1998
+ *
+ * Copyright 1998 Red Hat corp --- All Rights Reserved
+ *
+ * Journal commit routines for the generic filesystem journaling code;
+ * part of the ext2fs journaling system.
+ */
+
+#include <linux/time.h>
+#include <linux/fs.h>
+#include <linux/jbd2.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/jiffies.h>
+#include <linux/crc32.h>
+#include <linux/writeback.h>
+#include <linux/backing-dev.h>
+#include <linux/bio.h>
+#include <linux/blkdev.h>
+#include <linux/bitops.h>
+#include <trace/events/jbd2.h>
+
+/*
+ * IO end handler for temporary buffer_heads handling writes to the journal.
+ */
+static void journal_end_buffer_io_sync(struct buffer_head *bh, int uptodate)
+{
+	struct buffer_head *orig_bh = bh->b_private;
+
+	BUFFER_TRACE(bh, "");
+	if (uptodate)
+		set_buffer_uptodate(bh);
+	else
+		clear_buffer_uptodate(bh);
+	if (orig_bh) {
+		clear_bit_unlock(BH_Shadow, &orig_bh->b_state);
+		smp_mb__after_atomic();
+		wake_up_bit(&orig_bh->b_state, BH_Shadow);
+	}
+	unlock_buffer(bh);
+}
+
+/*
+ * When an ext4 file is truncated, it is possible that some pages are not
+ * successfully freed, because they are attached to a committing transaction.
+ * After the transaction commits, these pages are left on the LRU, with no
+ * ->mapping, and with attached buffers.  These pages are trivially reclaimable
+ * by the VM, but their apparent absence upsets the VM accounting, and it makes
+ * the numbers in /proc/meminfo look odd.
+ *
+ * So here, we have a buffer which has just come off the forget list.  Look to
+ * see if we can strip all buffers from the backing page.
+ *
+ * Called under lock_journal(), and possibly under journal_datalist_lock.  The
+ * caller provided us with a ref against the buffer, and we drop that here.
+ */
+static void release_buffer_page(struct buffer_head *bh)
+{
+	struct folio *folio;
+	struct page *page;
+
+	if (buffer_dirty(bh))
+		goto nope;
+	if (atomic_read(&bh->b_count) != 1)
+		goto nope;
+	page = bh->b_page;
+	if (!page)
+		goto nope;
+	folio = page_folio(page);
+	if (folio->mapping)
+		goto nope;
+
+	/* OK, it's a truncated page */
+	if (!folio_trylock(folio))
+		goto nope;
+
+	folio_get(folio);
+	__brelse(bh);
+	try_to_free_buffers(folio);
+	folio_unlock(folio);
+	folio_put(folio);
+	return;
+
+nope:
+	__brelse(bh);
+}
+
+static void jbd2_commit_block_csum_set(journal_t *j, struct buffer_head *bh)
+{
+	struct commit_header *h;
+	__u32 csum;
+
+	if (!jbd2_journal_has_csum_v2or3(j))
+		return;
+
+	h = (struct commit_header *)(bh->b_data);
+	h->h_chksum_type = 0;
+	h->h_chksum_size = 0;
+	h->h_chksum[0] = 0;
+	csum = jbd2_chksum(j, j->j_csum_seed, bh->b_data, j->j_blocksize);
+	h->h_chksum[0] = cpu_to_be32(csum);
+}
+
+/*
+ * Done it all: now submit the commit record.  We should have
+ * cleaned up our previous buffers by now, so if we are in abort
+ * mode we can now just skip the rest of the journal write
+ * entirely.
+ *
+ * Returns 1 if the journal needs to be aborted or 0 on success
+ */
+static int journal_submit_commit_record(journal_t *journal,
+					transaction_t *commit_transaction,
+					struct buffer_head **cbh,
+					__u32 crc32_sum)
+{
+	struct commit_header *tmp;
+	struct buffer_head *bh;
+	struct timespec64 now;
+	blk_opf_t write_flags = REQ_OP_WRITE | JBD2_JOURNAL_REQ_FLAGS;
+
+	*cbh = NULL;
+
+	if (is_journal_aborted(journal))
+		return 0;
+
+	bh = jbd2_journal_get_descriptor_buffer(commit_transaction,
+						JBD2_COMMIT_BLOCK);
+	if (!bh)
+		return 1;
+
+	tmp = (struct commit_header *)bh->b_data;
+	ktime_get_coarse_real_ts64(&now);
+	tmp->h_commit_sec = cpu_to_be64(now.tv_sec);
+	tmp->h_commit_nsec = cpu_to_be32(now.tv_nsec);
+
+	if (jbd2_has_feature_checksum(journal)) {
+		tmp->h_chksum_type 	= JBD2_CRC32_CHKSUM;
+		tmp->h_chksum_size 	= JBD2_CRC32_CHKSUM_SIZE;
+		tmp->h_chksum[0] 	= cpu_to_be32(crc32_sum);
+	}
+	jbd2_commit_block_csum_set(journal, bh);
+
+	BUFFER_TRACE(bh, "submit commit block");
+	lock_buffer(bh);
+	clear_buffer_dirty(bh);
+	set_buffer_uptodate(bh);
+	bh->b_end_io = journal_end_buffer_io_sync;
+
+	if (journal->j_flags & JBD2_BARRIER &&
+	    !jbd2_has_feature_async_commit(journal))
+		write_flags |= REQ_PREFLUSH | REQ_FUA;
+
+	submit_bh(write_flags, bh);
+	*cbh = bh;
+	return 0;
+}
+
+/*
+ * This function along with journal_submit_commit_record
+ * allows to write the commit record asynchronously.
+ */
+static int journal_wait_on_commit_record(journal_t *journal,
+					 struct buffer_head *bh)
+{
+	int ret = 0;
+
+	clear_buffer_dirty(bh);
+	wait_on_buffer(bh);
+
+	if (unlikely(!buffer_uptodate(bh)))
+		ret = -EIO;
+	put_bh(bh);            /* One for getblk() */
+
+	return ret;
+}
+
+/*
+ * write the filemap data using writepage() address_space_operations.
+ * We don't do block allocation here even for delalloc. We don't
+ * use writepages() because with delayed allocation we may be doing
+ * block allocation in writepages().
+ */
+int jbd2_journal_submit_inode_data_buffers(struct jbd2_inode *jinode)
+{
+	struct address_space *mapping = jinode->i_vfs_inode->i_mapping;
+	struct writeback_control wbc = {
+		.sync_mode =  WB_SYNC_ALL,
+		.nr_to_write = mapping->nrpages * 2,
+		.range_start = jinode->i_dirty_start,
+		.range_end = jinode->i_dirty_end,
+	};
+
+	/*
+	 * submit the inode data buffers. We use writepage
+	 * instead of writepages. Because writepages can do
+	 * block allocation with delalloc. We need to write
+	 * only allocated blocks here.
+	 */
+	return generic_writepages(mapping, &wbc);
+}
+
+/* Send all the data buffers related to an inode */
+int jbd2_submit_inode_data(struct jbd2_inode *jinode)
+{
+
+	if (!jinode || !(jinode->i_flags & JI_WRITE_DATA))
+		return 0;
+
+	trace_jbd2_submit_inode_data(jinode->i_vfs_inode);
+	return jbd2_journal_submit_inode_data_buffers(jinode);
+
+}
+EXPORT_SYMBOL(jbd2_submit_inode_data);
+
+int jbd2_wait_inode_data(journal_t *journal, struct jbd2_inode *jinode)
+{
+	if (!jinode || !(jinode->i_flags & JI_WAIT_DATA) ||
+		!jinode->i_vfs_inode || !jinode->i_vfs_inode->i_mapping)
+		return 0;
+	return filemap_fdatawait_range_keep_errors(
+		jinode->i_vfs_inode->i_mapping, jinode->i_dirty_start,
+		jinode->i_dirty_end);
+}
+EXPORT_SYMBOL(jbd2_wait_inode_data);
+
+/*
+ * Submit all the data buffers of inode associated with the transaction to
+ * disk.
+ *
+ * We are in a committing transaction. Therefore no new inode can be added to
+ * our inode list. We use JI_COMMIT_RUNNING flag to protect inode we currently
+ * operate on from being released while we write out pages.
+ */
+static int journal_submit_data_buffers(journal_t *journal,
+		transaction_t *commit_transaction)
+{
+	struct jbd2_inode *jinode;
+	int err, ret = 0;
+
+	spin_lock(&journal->j_list_lock);
+	list_for_each_entry(jinode, &commit_transaction->t_inode_list, i_list) {
+		if (!(jinode->i_flags & JI_WRITE_DATA))
+			continue;
+		jinode->i_flags |= JI_COMMIT_RUNNING;
+		spin_unlock(&journal->j_list_lock);
+		/* submit the inode data buffers. */
+		trace_jbd2_submit_inode_data(jinode->i_vfs_inode);
+		if (journal->j_submit_inode_data_buffers) {
+			err = journal->j_submit_inode_data_buffers(jinode);
+			if (!ret)
+				ret = err;
+		}
+		spin_lock(&journal->j_list_lock);
+		J_ASSERT(jinode->i_transaction == commit_transaction);
+		jinode->i_flags &= ~JI_COMMIT_RUNNING;
+		smp_mb();
+		wake_up_bit(&jinode->i_flags, __JI_COMMIT_RUNNING);
+	}
+	spin_unlock(&journal->j_list_lock);
+	return ret;
+}
+
+int jbd2_journal_finish_inode_data_buffers(struct jbd2_inode *jinode)
+{
+	struct address_space *mapping = jinode->i_vfs_inode->i_mapping;
+
+	return filemap_fdatawait_range_keep_errors(mapping,
+						   jinode->i_dirty_start,
+						   jinode->i_dirty_end);
+}
+
+/*
+ * Wait for data submitted for writeout, refile inodes to proper
+ * transaction if needed.
+ *
+ */
+static int journal_finish_inode_data_buffers(journal_t *journal,
+		transaction_t *commit_transaction)
+{
+	struct jbd2_inode *jinode, *next_i;
+	int err, ret = 0;
+
+	/* For locking, see the comment in journal_submit_data_buffers() */
+	spin_lock(&journal->j_list_lock);
+	list_for_each_entry(jinode, &commit_transaction->t_inode_list, i_list) {
+		if (!(jinode->i_flags & JI_WAIT_DATA))
+			continue;
+		jinode->i_flags |= JI_COMMIT_RUNNING;
+		spin_unlock(&journal->j_list_lock);
+		/* wait for the inode data buffers writeout. */
+		if (journal->j_finish_inode_data_buffers) {
+			err = journal->j_finish_inode_data_buffers(jinode);
+			if (!ret)
+				ret = err;
+		}
+		cond_resched();
+		spin_lock(&journal->j_list_lock);
+		jinode->i_flags &= ~JI_COMMIT_RUNNING;
+		smp_mb();
+		wake_up_bit(&jinode->i_flags, __JI_COMMIT_RUNNING);
+	}
+
+	/* Now refile inode to proper lists */
+	list_for_each_entry_safe(jinode, next_i,
+				 &commit_transaction->t_inode_list, i_list) {
+		list_del(&jinode->i_list);
+		if (jinode->i_next_transaction) {
+			jinode->i_transaction = jinode->i_next_transaction;
+			jinode->i_next_transaction = NULL;
+			list_add(&jinode->i_list,
+				&jinode->i_transaction->t_inode_list);
+		} else {
+			jinode->i_transaction = NULL;
+			jinode->i_dirty_start = 0;
+			jinode->i_dirty_end = 0;
+		}
+	}
+	spin_unlock(&journal->j_list_lock);
+
+	return ret;
+}
+
+static __u32 jbd2_checksum_data(__u32 crc32_sum, struct buffer_head *bh)
+{
+	struct page *page = bh->b_page;
+	char *addr;
+	__u32 checksum;
+
+	addr = kmap_atomic(page);
+	checksum = crc32_be(crc32_sum,
+		(void *)(addr + offset_in_page(bh->b_data)), bh->b_size);
+	kunmap_atomic(addr);
+
+	return checksum;
+}
+
+static void write_tag_block(journal_t *j, journal_block_tag_t *tag,
+				   unsigned long long block)
+{
+	tag->t_blocknr = cpu_to_be32(block & (u32)~0);
+	if (jbd2_has_feature_64bit(j))
+		tag->t_blocknr_high = cpu_to_be32((block >> 31) >> 1);
+}
+
+static void jbd2_block_tag_csum_set(journal_t *j, journal_block_tag_t *tag,
+				    struct buffer_head *bh, __u32 sequence)
+{
+	journal_block_tag3_t *tag3 = (journal_block_tag3_t *)tag;
+	struct page *page = bh->b_page;
+	__u8 *addr;
+	__u32 csum32;
+	__be32 seq;
+
+	if (!jbd2_journal_has_csum_v2or3(j))
+		return;
+
+	seq = cpu_to_be32(sequence);
+	addr = kmap_atomic(page);
+	csum32 = jbd2_chksum(j, j->j_csum_seed, (__u8 *)&seq, sizeof(seq));
+	csum32 = jbd2_chksum(j, csum32, addr + offset_in_page(bh->b_data),
+			     bh->b_size);
+	kunmap_atomic(addr);
+
+	if (jbd2_has_feature_csum3(j))
+		tag3->t_checksum = cpu_to_be32(csum32);
+	else
+		tag->t_checksum = cpu_to_be16(csum32);
+}
+/*
+ * jbd2_journal_commit_transaction
+ *
+ * The primary function for committing a transaction to the log.  This
+ * function is called by the journal thread to begin a complete commit.
+ */
+void jbd2_journal_commit_transaction(journal_t *journal)
+{
+	struct transaction_stats_s stats;
+	transaction_t *commit_transaction;
+	struct journal_head *jh;
+	struct buffer_head *descriptor;
+	struct buffer_head **wbuf = journal->j_wbuf;
+	int bufs;
+	int flags;
+	int err;
+	unsigned long long blocknr;
+	ktime_t start_time;
+	u64 commit_time;
+	char *tagp = NULL;
+	journal_block_tag_t *tag = NULL;
+	int space_left = 0;
+	int first_tag = 0;
+	int tag_flag;
+	int i;
+	int tag_bytes = journal_tag_bytes(journal);
+	struct buffer_head *cbh = NULL; /* For transactional checksums */
+	__u32 crc32_sum = ~0;
+	struct blk_plug plug;
+	/* Tail of the journal */
+	unsigned long first_block;
+	tid_t first_tid;
+	int update_tail;
+	int csum_size = 0;
+	LIST_HEAD(io_bufs);
+	LIST_HEAD(log_bufs);
+
+	if (jbd2_journal_has_csum_v2or3(journal))
+		csum_size = sizeof(struct jbd2_journal_block_tail);
+
+	/*
+	 * First job: lock down the current transaction and wait for
+	 * all outstanding updates to complete.
+	 */
+
+	/* Do we need to erase the effects of a prior jbd2_journal_flush? */
+	if (journal->j_flags & JBD2_FLUSHED) {
+		jbd2_debug(3, "super block updated\n");
+		mutex_lock_io(&journal->j_checkpoint_mutex);
+		/*
+		 * We hold j_checkpoint_mutex so tail cannot change under us.
+		 * We don't need any special data guarantees for writing sb
+		 * since journal is empty and it is ok for write to be
+		 * flushed only with transaction commit.
+		 */
+		jbd2_journal_update_sb_log_tail(journal,
+						journal->j_tail_sequence,
+						journal->j_tail, 0);
+		mutex_unlock(&journal->j_checkpoint_mutex);
+	} else {
+		jbd2_debug(3, "superblock not updated\n");
+	}
+
+	J_ASSERT(journal->j_running_transaction != NULL);
+	J_ASSERT(journal->j_committing_transaction == NULL);
+
+	write_lock(&journal->j_state_lock);
+	journal->j_flags |= JBD2_FULL_COMMIT_ONGOING;
+	while (journal->j_flags & JBD2_FAST_COMMIT_ONGOING) {
+		DEFINE_WAIT(wait);
+
+		prepare_to_wait(&journal->j_fc_wait, &wait,
+				TASK_UNINTERRUPTIBLE);
+		write_unlock(&journal->j_state_lock);
+		schedule();
+		write_lock(&journal->j_state_lock);
+		finish_wait(&journal->j_fc_wait, &wait);
+		/*
+		 * TODO: by blocking fast commits here, we are increasing
+		 * fsync() latency slightly. Strictly speaking, we don't need
+		 * to block fast commits until the transaction enters T_FLUSH
+		 * state. So an optimization is possible where we block new fast
+		 * commits here and wait for existing ones to complete
+		 * just before we enter T_FLUSH. That way, the existing fast
+		 * commits and this full commit can proceed parallely.
+		 */
+	}
+	write_unlock(&journal->j_state_lock);
+
+	commit_transaction = journal->j_running_transaction;
+
+	trace_jbd2_start_commit(journal, commit_transaction);
+	jbd2_debug(1, "JBD2: starting commit of transaction %d\n",
+			commit_transaction->t_tid);
+
+	write_lock(&journal->j_state_lock);
+	journal->j_fc_off = 0;
+	J_ASSERT(commit_transaction->t_state == T_RUNNING);
+	commit_transaction->t_state = T_LOCKED;
+
+	trace_jbd2_commit_locking(journal, commit_transaction);
+	stats.run.rs_wait = commit_transaction->t_max_wait;
+	stats.run.rs_request_delay = 0;
+	stats.run.rs_locked = jiffies;
+	if (commit_transaction->t_requested)
+		stats.run.rs_request_delay =
+			jbd2_time_diff(commit_transaction->t_requested,
+				       stats.run.rs_locked);
+	stats.run.rs_running = jbd2_time_diff(commit_transaction->t_start,
+					      stats.run.rs_locked);
+
+	// waits for any t_updates to finish
+	jbd2_journal_wait_updates(journal);
+
+	commit_transaction->t_state = T_SWITCH;
+
+	J_ASSERT (atomic_read(&commit_transaction->t_outstanding_credits) <=
+			journal->j_max_transaction_buffers);
+
+	/*
+	 * First thing we are allowed to do is to discard any remaining
+	 * BJ_Reserved buffers.  Note, it is _not_ permissible to assume
+	 * that there are no such buffers: if a large filesystem
+	 * operation like a truncate needs to split itself over multiple
+	 * transactions, then it may try to do a jbd2_journal_restart() while
+	 * there are still BJ_Reserved buffers outstanding.  These must
+	 * be released cleanly from the current transaction.
+	 *
+	 * In this case, the filesystem must still reserve write access
+	 * again before modifying the buffer in the new transaction, but
+	 * we do not require it to remember exactly which old buffers it
+	 * has reserved.  This is consistent with the existing behaviour
+	 * that multiple jbd2_journal_get_write_access() calls to the same
+	 * buffer are perfectly permissible.
+	 * We use journal->j_state_lock here to serialize processing of
+	 * t_reserved_list with eviction of buffers from journal_unmap_buffer().
+	 */
+	while (commit_transaction->t_reserved_list) {
+		jh = commit_transaction->t_reserved_list;
+		JBUFFER_TRACE(jh, "reserved, unused: refile");
+		/*
+		 * A jbd2_journal_get_undo_access()+jbd2_journal_release_buffer() may
+		 * leave undo-committed data.
+		 */
+		if (jh->b_committed_data) {
+			struct buffer_head *bh = jh2bh(jh);
+
+			spin_lock(&jh->b_state_lock);
+			jbd2_free(jh->b_committed_data, bh->b_size);
+			jh->b_committed_data = NULL;
+			spin_unlock(&jh->b_state_lock);
+		}
+		jbd2_journal_refile_buffer(journal, jh);
+	}
+
+	write_unlock(&journal->j_state_lock);
+	/*
+	 * Now try to drop any written-back buffers from the journal's
+	 * checkpoint lists.  We do this *before* commit because it potentially
+	 * frees some memory
+	 */
+	spin_lock(&journal->j_list_lock);
+	__jbd2_journal_clean_checkpoint_list(journal, false);
+	spin_unlock(&journal->j_list_lock);
+
+	jbd2_debug(3, "JBD2: commit phase 1\n");
+
+	/*
+	 * Clear revoked flag to reflect there is no revoked buffers
+	 * in the next transaction which is going to be started.
+	 */
+	jbd2_clear_buffer_revoked_flags(journal);
+
+	/*
+	 * Switch to a new revoke table.
+	 */
+	jbd2_journal_switch_revoke_table(journal);
+
+	write_lock(&journal->j_state_lock);
+	/*
+	 * Reserved credits cannot be claimed anymore, free them
+	 */
+	atomic_sub(atomic_read(&journal->j_reserved_credits),
+		   &commit_transaction->t_outstanding_credits);
+
+	trace_jbd2_commit_flushing(journal, commit_transaction);
+	stats.run.rs_flushing = jiffies;
+	stats.run.rs_locked = jbd2_time_diff(stats.run.rs_locked,
+					     stats.run.rs_flushing);
+
+	commit_transaction->t_state = T_FLUSH;
+	journal->j_committing_transaction = commit_transaction;
+	journal->j_running_transaction = NULL;
+	start_time = ktime_get();
+	commit_transaction->t_log_start = journal->j_head;
+	wake_up_all(&journal->j_wait_transaction_locked);
+	write_unlock(&journal->j_state_lock);
+
+	jbd2_debug(3, "JBD2: commit phase 2a\n");
+
+	/*
+	 * Now start flushing things to disk, in the order they appear
+	 * on the transaction lists.  Data blocks go first.
+	 */
+	err = journal_submit_data_buffers(journal, commit_transaction);
+	if (err)
+		jbd2_journal_abort(journal, err);
+
+	blk_start_plug(&plug);
+	jbd2_journal_write_revoke_records(commit_transaction, &log_bufs);
+
+	jbd2_debug(3, "JBD2: commit phase 2b\n");
+
+	/*
+	 * Way to go: we have now written out all of the data for a
+	 * transaction!  Now comes the tricky part: we need to write out
+	 * metadata.  Loop over the transaction's entire buffer list:
+	 */
+	write_lock(&journal->j_state_lock);
+	commit_transaction->t_state = T_COMMIT;
+	write_unlock(&journal->j_state_lock);
+
+	trace_jbd2_commit_logging(journal, commit_transaction);
+	stats.run.rs_logging = jiffies;
+	stats.run.rs_flushing = jbd2_time_diff(stats.run.rs_flushing,
+					       stats.run.rs_logging);
+	stats.run.rs_blocks = commit_transaction->t_nr_buffers;
+	stats.run.rs_blocks_logged = 0;
+
+	J_ASSERT(commit_transaction->t_nr_buffers <=
+		 atomic_read(&commit_transaction->t_outstanding_credits));
+
+	err = 0;
+	bufs = 0;
+	descriptor = NULL;
+	while (commit_transaction->t_buffers) {
+
+		/* Find the next buffer to be journaled... */
+
+		jh = commit_transaction->t_buffers;
+
+		/* If we're in abort mode, we just un-journal the buffer and
+		   release it. */
+
+		if (is_journal_aborted(journal)) {
+			clear_buffer_jbddirty(jh2bh(jh));
+			JBUFFER_TRACE(jh, "journal is aborting: refile");
+			jbd2_buffer_abort_trigger(jh,
+						  jh->b_frozen_data ?
+						  jh->b_frozen_triggers :
+						  jh->b_triggers);
+			jbd2_journal_refile_buffer(journal, jh);
+			/* If that was the last one, we need to clean up
+			 * any descriptor buffers which may have been
+			 * already allocated, even if we are now
+			 * aborting. */
+			if (!commit_transaction->t_buffers)
+				goto start_journal_io;
+			continue;
+		}
+
+		/* Make sure we have a descriptor block in which to
+		   record the metadata buffer. */
+
+		if (!descriptor) {
+			J_ASSERT (bufs == 0);
+
+			jbd2_debug(4, "JBD2: get descriptor\n");
+
+			descriptor = jbd2_journal_get_descriptor_buffer(
+							commit_transaction,
+							JBD2_DESCRIPTOR_BLOCK);
+			if (!descriptor) {
+				jbd2_journal_abort(journal, -EIO);
+				continue;
+			}
+
+			jbd2_debug(4, "JBD2: got buffer %llu (%p)\n",
+				(unsigned long long)descriptor->b_blocknr,
+				descriptor->b_data);
+			tagp = &descriptor->b_data[sizeof(journal_header_t)];
+			space_left = descriptor->b_size -
+						sizeof(journal_header_t);
+			first_tag = 1;
+			set_buffer_jwrite(descriptor);
+			set_buffer_dirty(descriptor);
+			wbuf[bufs++] = descriptor;
+
+			/* Record it so that we can wait for IO
+                           completion later */
+			BUFFER_TRACE(descriptor, "ph3: file as descriptor");
+			jbd2_file_log_bh(&log_bufs, descriptor);
+		}
+
+		/* Where is the buffer to be written? */
+
+		err = jbd2_journal_next_log_block(journal, &blocknr);
+		/* If the block mapping failed, just abandon the buffer
+		   and repeat this loop: we'll fall into the
+		   refile-on-abort condition above. */
+		if (err) {
+			jbd2_journal_abort(journal, err);
+			continue;
+		}
+
+		/*
+		 * start_this_handle() uses t_outstanding_credits to determine
+		 * the free space in the log.
+		 */
+		atomic_dec(&commit_transaction->t_outstanding_credits);
+
+		/* Bump b_count to prevent truncate from stumbling over
+                   the shadowed buffer!  @@@ This can go if we ever get
+                   rid of the shadow pairing of buffers. */
+		atomic_inc(&jh2bh(jh)->b_count);
+
+		/*
+		 * Make a temporary IO buffer with which to write it out
+		 * (this will requeue the metadata buffer to BJ_Shadow).
+		 */
+		set_bit(BH_JWrite, &jh2bh(jh)->b_state);
+		JBUFFER_TRACE(jh, "ph3: write metadata");
+		flags = jbd2_journal_write_metadata_buffer(commit_transaction,
+						jh, &wbuf[bufs], blocknr);
+		if (flags < 0) {
+			jbd2_journal_abort(journal, flags);
+			continue;
+		}
+		jbd2_file_log_bh(&io_bufs, wbuf[bufs]);
+
+		/* Record the new block's tag in the current descriptor
+                   buffer */
+
+		tag_flag = 0;
+		if (flags & 1)
+			tag_flag |= JBD2_FLAG_ESCAPE;
+		if (!first_tag)
+			tag_flag |= JBD2_FLAG_SAME_UUID;
+
+		tag = (journal_block_tag_t *) tagp;
+		write_tag_block(journal, tag, jh2bh(jh)->b_blocknr);
+		tag->t_flags = cpu_to_be16(tag_flag);
+		jbd2_block_tag_csum_set(journal, tag, wbuf[bufs],
+					commit_transaction->t_tid);
+		tagp += tag_bytes;
+		space_left -= tag_bytes;
+		bufs++;
+
+		if (first_tag) {
+			memcpy (tagp, journal->j_uuid, 16);
+			tagp += 16;
+			space_left -= 16;
+			first_tag = 0;
+		}
+
+		/* If there's no more to do, or if the descriptor is full,
+		   let the IO rip! */
+
+		if (bufs == journal->j_wbufsize ||
+		    commit_transaction->t_buffers == NULL ||
+		    space_left < tag_bytes + 16 + csum_size) {
+
+			jbd2_debug(4, "JBD2: Submit %d IOs\n", bufs);
+
+			/* Write an end-of-descriptor marker before
+                           submitting the IOs.  "tag" still points to
+                           the last tag we set up. */
+
+			tag->t_flags |= cpu_to_be16(JBD2_FLAG_LAST_TAG);
+start_journal_io:
+			if (descriptor)
+				jbd2_descriptor_block_csum_set(journal,
+							descriptor);
+
+			for (i = 0; i < bufs; i++) {
+				struct buffer_head *bh = wbuf[i];
+
+				/*
+				 * Compute checksum.
+				 */
+				if (jbd2_has_feature_checksum(journal)) {
+					crc32_sum =
+					    jbd2_checksum_data(crc32_sum, bh);
+				}
+
+				lock_buffer(bh);
+				clear_buffer_dirty(bh);
+				set_buffer_uptodate(bh);
+				bh->b_end_io = journal_end_buffer_io_sync;
+				submit_bh(REQ_OP_WRITE | JBD2_JOURNAL_REQ_FLAGS,
+					  bh);
+			}
+			cond_resched();
+
+			/* Force a new descriptor to be generated next
+                           time round the loop. */
+			descriptor = NULL;
+			bufs = 0;
+		}
+	}
+
+	err = journal_finish_inode_data_buffers(journal, commit_transaction);
+	if (err) {
+		printk(KERN_WARNING
+			"JBD2: Detected IO errors while flushing file data "
+		       "on %s\n", journal->j_devname);
+		if (journal->j_flags & JBD2_ABORT_ON_SYNCDATA_ERR)
+			jbd2_journal_abort(journal, err);
+		err = 0;
+	}
+
+	/*
+	 * Get current oldest transaction in the log before we issue flush
+	 * to the filesystem device. After the flush we can be sure that
+	 * blocks of all older transactions are checkpointed to persistent
+	 * storage and we will be safe to update journal start in the
+	 * superblock with the numbers we get here.
+	 */
+	update_tail =
+		jbd2_journal_get_log_tail(journal, &first_tid, &first_block);
+
+	write_lock(&journal->j_state_lock);
+	if (update_tail) {
+		long freed = first_block - journal->j_tail;
+
+		if (first_block < journal->j_tail)
+			freed += journal->j_last - journal->j_first;
+		/* Update tail only if we free significant amount of space */
+		if (freed < jbd2_journal_get_max_txn_bufs(journal))
+			update_tail = 0;
+	}
+	J_ASSERT(commit_transaction->t_state == T_COMMIT);
+	commit_transaction->t_state = T_COMMIT_DFLUSH;
+	write_unlock(&journal->j_state_lock);
+
+	/*
+	 * If the journal is not located on the file system device,
+	 * then we must flush the file system device before we issue
+	 * the commit record
+	 */
+	if (commit_transaction->t_need_data_flush &&
+	    (journal->j_fs_dev != journal->j_dev) &&
+	    (journal->j_flags & JBD2_BARRIER))
+		blkdev_issue_flush(journal->j_fs_dev);
+
+	/* Done it all: now write the commit record asynchronously. */
+	if (jbd2_has_feature_async_commit(journal)) {
+		err = journal_submit_commit_record(journal, commit_transaction,
+						 &cbh, crc32_sum);
+		if (err)
+			jbd2_journal_abort(journal, err);
+	}
+
+	blk_finish_plug(&plug);
+
+	/* Lo and behold: we have just managed to send a transaction to
+           the log.  Before we can commit it, wait for the IO so far to
+           complete.  Control buffers being written are on the
+           transaction's t_log_list queue, and metadata buffers are on
+           the io_bufs list.
+
+	   Wait for the buffers in reverse order.  That way we are
+	   less likely to be woken up until all IOs have completed, and
+	   so we incur less scheduling load.
+	*/
+
+	jbd2_debug(3, "JBD2: commit phase 3\n");
+
+	while (!list_empty(&io_bufs)) {
+		struct buffer_head *bh = list_entry(io_bufs.prev,
+						    struct buffer_head,
+						    b_assoc_buffers);
+
+		wait_on_buffer(bh);
+		cond_resched();
+
+		if (unlikely(!buffer_uptodate(bh)))
+			err = -EIO;
+		jbd2_unfile_log_bh(bh);
+		stats.run.rs_blocks_logged++;
+
+		/*
+		 * The list contains temporary buffer heads created by
+		 * jbd2_journal_write_metadata_buffer().
+		 */
+		BUFFER_TRACE(bh, "dumping temporary bh");
+		__brelse(bh);
+		J_ASSERT_BH(bh, atomic_read(&bh->b_count) == 0);
+		free_buffer_head(bh);
+
+		/* We also have to refile the corresponding shadowed buffer */
+		jh = commit_transaction->t_shadow_list->b_tprev;
+		bh = jh2bh(jh);
+		clear_buffer_jwrite(bh);
+		J_ASSERT_BH(bh, buffer_jbddirty(bh));
+		J_ASSERT_BH(bh, !buffer_shadow(bh));
+
+		/* The metadata is now released for reuse, but we need
+                   to remember it against this transaction so that when
+                   we finally commit, we can do any checkpointing
+                   required. */
+		JBUFFER_TRACE(jh, "file as BJ_Forget");
+		jbd2_journal_file_buffer(jh, commit_transaction, BJ_Forget);
+		JBUFFER_TRACE(jh, "brelse shadowed buffer");
+		__brelse(bh);
+	}
+
+	J_ASSERT (commit_transaction->t_shadow_list == NULL);
+
+	jbd2_debug(3, "JBD2: commit phase 4\n");
+
+	/* Here we wait for the revoke record and descriptor record buffers */
+	while (!list_empty(&log_bufs)) {
+		struct buffer_head *bh;
+
+		bh = list_entry(log_bufs.prev, struct buffer_head, b_assoc_buffers);
+		wait_on_buffer(bh);
+		cond_resched();
+
+		if (unlikely(!buffer_uptodate(bh)))
+			err = -EIO;
+
+		BUFFER_TRACE(bh, "ph5: control buffer writeout done: unfile");
+		clear_buffer_jwrite(bh);
+		jbd2_unfile_log_bh(bh);
+		stats.run.rs_blocks_logged++;
+		__brelse(bh);		/* One for getblk */
+		/* AKPM: bforget here */
+	}
+
+	if (err)
+		jbd2_journal_abort(journal, err);
+
+	jbd2_debug(3, "JBD2: commit phase 5\n");
+	write_lock(&journal->j_state_lock);
+	J_ASSERT(commit_transaction->t_state == T_COMMIT_DFLUSH);
+	commit_transaction->t_state = T_COMMIT_JFLUSH;
+	write_unlock(&journal->j_state_lock);
+
+	if (!jbd2_has_feature_async_commit(journal)) {
+		err = journal_submit_commit_record(journal, commit_transaction,
+						&cbh, crc32_sum);
+		if (err)
+			jbd2_journal_abort(journal, err);
+	}
+	if (cbh)
+		err = journal_wait_on_commit_record(journal, cbh);
+	stats.run.rs_blocks_logged++;
+	if (jbd2_has_feature_async_commit(journal) &&
+	    journal->j_flags & JBD2_BARRIER) {
+		blkdev_issue_flush(journal->j_dev);
+	}
+
+	if (err)
+		jbd2_journal_abort(journal, err);
+
+	WARN_ON_ONCE(
+		atomic_read(&commit_transaction->t_outstanding_credits) < 0);
+
+	/*
+	 * Now disk caches for filesystem device are flushed so we are safe to
+	 * erase checkpointed transactions from the log by updating journal
+	 * superblock.
+	 */
+	if (update_tail)
+		jbd2_update_log_tail(journal, first_tid, first_block);
+
+	/* End of a transaction!  Finally, we can do checkpoint
+           processing: any buffers committed as a result of this
+           transaction can be removed from any checkpoint list it was on
+           before. */
+
+	jbd2_debug(3, "JBD2: commit phase 6\n");
+
+	J_ASSERT(list_empty(&commit_transaction->t_inode_list));
+	J_ASSERT(commit_transaction->t_buffers == NULL);
+	J_ASSERT(commit_transaction->t_checkpoint_list == NULL);
+	J_ASSERT(commit_transaction->t_shadow_list == NULL);
+
+restart_loop:
+	/*
+	 * As there are other places (journal_unmap_buffer()) adding buffers
+	 * to this list we have to be careful and hold the j_list_lock.
+	 */
+	spin_lock(&journal->j_list_lock);
+	while (commit_transaction->t_forget) {
+		transaction_t *cp_transaction;
+		struct buffer_head *bh;
+		int try_to_free = 0;
+		bool drop_ref;
+
+		jh = commit_transaction->t_forget;
+		spin_unlock(&journal->j_list_lock);
+		bh = jh2bh(jh);
+		/*
+		 * Get a reference so that bh cannot be freed before we are
+		 * done with it.
+		 */
+		get_bh(bh);
+		spin_lock(&jh->b_state_lock);
+		J_ASSERT_JH(jh,	jh->b_transaction == commit_transaction);
+
+		/*
+		 * If there is undo-protected committed data against
+		 * this buffer, then we can remove it now.  If it is a
+		 * buffer needing such protection, the old frozen_data
+		 * field now points to a committed version of the
+		 * buffer, so rotate that field to the new committed
+		 * data.
+		 *
+		 * Otherwise, we can just throw away the frozen data now.
+		 *
+		 * We also know that the frozen data has already fired
+		 * its triggers if they exist, so we can clear that too.
+		 */
+		if (jh->b_committed_data) {
+			jbd2_free(jh->b_committed_data, bh->b_size);
+			jh->b_committed_data = NULL;
+			if (jh->b_frozen_data) {
+				jh->b_committed_data = jh->b_frozen_data;
+				jh->b_frozen_data = NULL;
+				jh->b_frozen_triggers = NULL;
+			}
+		} else if (jh->b_frozen_data) {
+			jbd2_free(jh->b_frozen_data, bh->b_size);
+			jh->b_frozen_data = NULL;
+			jh->b_frozen_triggers = NULL;
+		}
+
+		spin_lock(&journal->j_list_lock);
+		cp_transaction = jh->b_cp_transaction;
+		if (cp_transaction) {
+			JBUFFER_TRACE(jh, "remove from old cp transaction");
+			cp_transaction->t_chp_stats.cs_dropped++;
+			__jbd2_journal_remove_checkpoint(jh);
+		}
+
+		/* Only re-checkpoint the buffer_head if it is marked
+		 * dirty.  If the buffer was added to the BJ_Forget list
+		 * by jbd2_journal_forget, it may no longer be dirty and
+		 * there's no point in keeping a checkpoint record for
+		 * it. */
+
+		/*
+		 * A buffer which has been freed while still being journaled
+		 * by a previous transaction, refile the buffer to BJ_Forget of
+		 * the running transaction. If the just committed transaction
+		 * contains "add to orphan" operation, we can completely
+		 * invalidate the buffer now. We are rather through in that
+		 * since the buffer may be still accessible when blocksize <
+		 * pagesize and it is attached to the last partial page.
+		 */
+		if (buffer_freed(bh) && !jh->b_next_transaction) {
+			struct address_space *mapping;
+
+			clear_buffer_freed(bh);
+			clear_buffer_jbddirty(bh);
+
+			/*
+			 * Block device buffers need to stay mapped all the
+			 * time, so it is enough to clear buffer_jbddirty and
+			 * buffer_freed bits. For the file mapping buffers (i.e.
+			 * journalled data) we need to unmap buffer and clear
+			 * more bits. We also need to be careful about the check
+			 * because the data page mapping can get cleared under
+			 * our hands. Note that if mapping == NULL, we don't
+			 * need to make buffer unmapped because the page is
+			 * already detached from the mapping and buffers cannot
+			 * get reused.
+			 */
+			mapping = READ_ONCE(bh->b_page->mapping);
+			if (mapping && !sb_is_blkdev_sb(mapping->host->i_sb)) {
+				clear_buffer_mapped(bh);
+				clear_buffer_new(bh);
+				clear_buffer_req(bh);
+				bh->b_bdev = NULL;
+			}
+		}
+
+		if (buffer_jbddirty(bh)) {
+			JBUFFER_TRACE(jh, "add to new checkpointing trans");
+			__jbd2_journal_insert_checkpoint(jh, commit_transaction);
+			if (is_journal_aborted(journal))
+				clear_buffer_jbddirty(bh);
+		} else {
+			J_ASSERT_BH(bh, !buffer_dirty(bh));
+			/*
+			 * The buffer on BJ_Forget list and not jbddirty means
+			 * it has been freed by this transaction and hence it
+			 * could not have been reallocated until this
+			 * transaction has committed. *BUT* it could be
+			 * reallocated once we have written all the data to
+			 * disk and before we process the buffer on BJ_Forget
+			 * list.
+			 */
+			if (!jh->b_next_transaction)
+				try_to_free = 1;
+		}
+		JBUFFER_TRACE(jh, "refile or unfile buffer");
+		drop_ref = __jbd2_journal_refile_buffer(jh);
+		spin_unlock(&jh->b_state_lock);
+		if (drop_ref)
+			jbd2_journal_put_journal_head(jh);
+		if (try_to_free)
+			release_buffer_page(bh);	/* Drops bh reference */
+		else
+			__brelse(bh);
+		cond_resched_lock(&journal->j_list_lock);
+	}
+	spin_unlock(&journal->j_list_lock);
+	/*
+	 * This is a bit sleazy.  We use j_list_lock to protect transition
+	 * of a transaction into T_FINISHED state and calling
+	 * __jbd2_journal_drop_transaction(). Otherwise we could race with
+	 * other checkpointing code processing the transaction...
+	 */
+	write_lock(&journal->j_state_lock);
+	spin_lock(&journal->j_list_lock);
+	/*
+	 * Now recheck if some buffers did not get attached to the transaction
+	 * while the lock was dropped...
+	 */
+	if (commit_transaction->t_forget) {
+		spin_unlock(&journal->j_list_lock);
+		write_unlock(&journal->j_state_lock);
+		goto restart_loop;
+	}
+
+	/* Add the transaction to the checkpoint list
+	 * __journal_remove_checkpoint() can not destroy transaction
+	 * under us because it is not marked as T_FINISHED yet */
+	if (journal->j_checkpoint_transactions == NULL) {
+		journal->j_checkpoint_transactions = commit_transaction;
+		commit_transaction->t_cpnext = commit_transaction;
+		commit_transaction->t_cpprev = commit_transaction;
+	} else {
+		commit_transaction->t_cpnext =
+			journal->j_checkpoint_transactions;
+		commit_transaction->t_cpprev =
+			commit_transaction->t_cpnext->t_cpprev;
+		commit_transaction->t_cpnext->t_cpprev =
+			commit_transaction;
+		commit_transaction->t_cpprev->t_cpnext =
+				commit_transaction;
+	}
+	spin_unlock(&journal->j_list_lock);
+
+	/* Done with this transaction! */
+
+	jbd2_debug(3, "JBD2: commit phase 7\n");
+
+	J_ASSERT(commit_transaction->t_state == T_COMMIT_JFLUSH);
+
+	commit_transaction->t_start = jiffies;
+	stats.run.rs_logging = jbd2_time_diff(stats.run.rs_logging,
+					      commit_transaction->t_start);
+
+	/*
+	 * File the transaction statistics
+	 */
+	stats.ts_tid = commit_transaction->t_tid;
+	stats.run.rs_handle_count =
+		atomic_read(&commit_transaction->t_handle_count);
+	trace_jbd2_run_stats(journal->j_fs_dev->bd_dev,
+			     commit_transaction->t_tid, &stats.run);
+	stats.ts_requested = (commit_transaction->t_requested) ? 1 : 0;
+
+	commit_transaction->t_state = T_COMMIT_CALLBACK;
+	J_ASSERT(commit_transaction == journal->j_committing_transaction);
+	journal->j_commit_sequence = commit_transaction->t_tid;
+	journal->j_committing_transaction = NULL;
+	commit_time = ktime_to_ns(ktime_sub(ktime_get(), start_time));
+
+	/*
+	 * weight the commit time higher than the average time so we don't
+	 * react too strongly to vast changes in the commit time
+	 */
+	if (likely(journal->j_average_commit_time))
+		journal->j_average_commit_time = (commit_time +
+				journal->j_average_commit_time*3) / 4;
+	else
+		journal->j_average_commit_time = commit_time;
+
+	write_unlock(&journal->j_state_lock);
+
+	if (journal->j_commit_callback)
+		journal->j_commit_callback(journal, commit_transaction);
+	if (journal->j_fc_cleanup_callback)
+		journal->j_fc_cleanup_callback(journal, 1, commit_transaction->t_tid);
+
+	trace_jbd2_end_commit(journal, commit_transaction);
+	jbd2_debug(1, "JBD2: commit %d complete, head %d\n",
+		  journal->j_commit_sequence, journal->j_tail_sequence);
+
+	write_lock(&journal->j_state_lock);
+	journal->j_flags &= ~JBD2_FULL_COMMIT_ONGOING;
+	journal->j_flags &= ~JBD2_FAST_COMMIT_ONGOING;
+	spin_lock(&journal->j_list_lock);
+	commit_transaction->t_state = T_FINISHED;
+	/* Check if the transaction can be dropped now that we are finished */
+	if (commit_transaction->t_checkpoint_list == NULL) {
+		__jbd2_journal_drop_transaction(journal, commit_transaction);
+		jbd2_journal_free_transaction(commit_transaction);
+	}
+	spin_unlock(&journal->j_list_lock);
+	write_unlock(&journal->j_state_lock);
+	wake_up(&journal->j_wait_done_commit);
+	wake_up(&journal->j_fc_wait);
+
+	/*
+	 * Calculate overall stats
+	 */
+	spin_lock(&journal->j_history_lock);
+	journal->j_stats.ts_tid++;
+	journal->j_stats.ts_requested += stats.ts_requested;
+	journal->j_stats.run.rs_wait += stats.run.rs_wait;
+	journal->j_stats.run.rs_request_delay += stats.run.rs_request_delay;
+	journal->j_stats.run.rs_running += stats.run.rs_running;
+	journal->j_stats.run.rs_locked += stats.run.rs_locked;
+	journal->j_stats.run.rs_flushing += stats.run.rs_flushing;
+	journal->j_stats.run.rs_logging += stats.run.rs_logging;
+	journal->j_stats.run.rs_handle_count += stats.run.rs_handle_count;
+	journal->j_stats.run.rs_blocks += stats.run.rs_blocks;
+	journal->j_stats.run.rs_blocks_logged += stats.run.rs_blocks_logged;
+	spin_unlock(&journal->j_history_lock);
+}
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
new file mode 100644
index 000000000..3df45e469
--- /dev/null
+++ b/fs/jbd2/journal.c
@@ -0,0 +1,3204 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * linux/fs/jbd2/journal.c
+ *
+ * Written by Stephen C. Tweedie <sct@redhat.com>, 1998
+ *
+ * Copyright 1998 Red Hat corp --- All Rights Reserved
+ *
+ * Generic filesystem journal-writing code; part of the ext2fs
+ * journaling system.
+ *
+ * This file manages journals: areas of disk reserved for logging
+ * transactional updates.  This includes the kernel journaling thread
+ * which is responsible for scheduling updates to the log.
+ *
+ * We do not actually manage the physical storage of the journal in this
+ * file: that is left to a per-journal policy function, which allows us
+ * to store the journal within a filesystem-specified area for ext2
+ * journaling (ext2 can use a reserved inode for storing the log).
+ */
+
+#include <linux/module.h>
+#include <linux/time.h>
+#include <linux/fs.h>
+#include <linux/jbd2.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/freezer.h>
+#include <linux/pagemap.h>
+#include <linux/kthread.h>
+#include <linux/poison.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/math64.h>
+#include <linux/hash.h>
+#include <linux/log2.h>
+#include <linux/vmalloc.h>
+#include <linux/backing-dev.h>
+#include <linux/bitops.h>
+#include <linux/ratelimit.h>
+#include <linux/sched/mm.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/jbd2.h>
+
+#include <linux/uaccess.h>
+#include <asm/page.h>
+
+#ifdef CONFIG_JBD2_DEBUG
+static ushort jbd2_journal_enable_debug __read_mostly;
+
+module_param_named(jbd2_debug, jbd2_journal_enable_debug, ushort, 0644);
+MODULE_PARM_DESC(jbd2_debug, "Debugging level for jbd2");
+#endif
+
+EXPORT_SYMBOL(jbd2_journal_extend);
+EXPORT_SYMBOL(jbd2_journal_stop);
+EXPORT_SYMBOL(jbd2_journal_lock_updates);
+EXPORT_SYMBOL(jbd2_journal_unlock_updates);
+EXPORT_SYMBOL(jbd2_journal_get_write_access);
+EXPORT_SYMBOL(jbd2_journal_get_create_access);
+EXPORT_SYMBOL(jbd2_journal_get_undo_access);
+EXPORT_SYMBOL(jbd2_journal_set_triggers);
+EXPORT_SYMBOL(jbd2_journal_dirty_metadata);
+EXPORT_SYMBOL(jbd2_journal_forget);
+EXPORT_SYMBOL(jbd2_journal_flush);
+EXPORT_SYMBOL(jbd2_journal_revoke);
+
+EXPORT_SYMBOL(jbd2_journal_init_dev);
+EXPORT_SYMBOL(jbd2_journal_init_inode);
+EXPORT_SYMBOL(jbd2_journal_check_used_features);
+EXPORT_SYMBOL(jbd2_journal_check_available_features);
+EXPORT_SYMBOL(jbd2_journal_set_features);
+EXPORT_SYMBOL(jbd2_journal_load);
+EXPORT_SYMBOL(jbd2_journal_destroy);
+EXPORT_SYMBOL(jbd2_journal_abort);
+EXPORT_SYMBOL(jbd2_journal_errno);
+EXPORT_SYMBOL(jbd2_journal_ack_err);
+EXPORT_SYMBOL(jbd2_journal_clear_err);
+EXPORT_SYMBOL(jbd2_log_wait_commit);
+EXPORT_SYMBOL(jbd2_journal_start_commit);
+EXPORT_SYMBOL(jbd2_journal_force_commit_nested);
+EXPORT_SYMBOL(jbd2_journal_wipe);
+EXPORT_SYMBOL(jbd2_journal_blocks_per_page);
+EXPORT_SYMBOL(jbd2_journal_invalidate_folio);
+EXPORT_SYMBOL(jbd2_journal_try_to_free_buffers);
+EXPORT_SYMBOL(jbd2_journal_force_commit);
+EXPORT_SYMBOL(jbd2_journal_inode_ranged_write);
+EXPORT_SYMBOL(jbd2_journal_inode_ranged_wait);
+EXPORT_SYMBOL(jbd2_journal_submit_inode_data_buffers);
+EXPORT_SYMBOL(jbd2_journal_finish_inode_data_buffers);
+EXPORT_SYMBOL(jbd2_journal_init_jbd_inode);
+EXPORT_SYMBOL(jbd2_journal_release_jbd_inode);
+EXPORT_SYMBOL(jbd2_journal_begin_ordered_truncate);
+EXPORT_SYMBOL(jbd2_inode_cache);
+
+static int jbd2_journal_create_slab(size_t slab_size);
+
+#ifdef CONFIG_JBD2_DEBUG
+void __jbd2_debug(int level, const char *file, const char *func,
+		  unsigned int line, const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+
+	if (level > jbd2_journal_enable_debug)
+		return;
+	va_start(args, fmt);
+	vaf.fmt = fmt;
+	vaf.va = &args;
+	printk(KERN_DEBUG "%s: (%s, %u): %pV", file, func, line, &vaf);
+	va_end(args);
+}
+#endif
+
+/* Checksumming functions */
+static int jbd2_verify_csum_type(journal_t *j, journal_superblock_t *sb)
+{
+	if (!jbd2_journal_has_csum_v2or3_feature(j))
+		return 1;
+
+	return sb->s_checksum_type == JBD2_CRC32C_CHKSUM;
+}
+
+static __be32 jbd2_superblock_csum(journal_t *j, journal_superblock_t *sb)
+{
+	__u32 csum;
+	__be32 old_csum;
+
+	old_csum = sb->s_checksum;
+	sb->s_checksum = 0;
+	csum = jbd2_chksum(j, ~0, (char *)sb, sizeof(journal_superblock_t));
+	sb->s_checksum = old_csum;
+
+	return cpu_to_be32(csum);
+}
+
+/*
+ * Helper function used to manage commit timeouts
+ */
+
+static void commit_timeout(struct timer_list *t)
+{
+	journal_t *journal = from_timer(journal, t, j_commit_timer);
+
+	wake_up_process(journal->j_task);
+}
+
+/*
+ * kjournald2: The main thread function used to manage a logging device
+ * journal.
+ *
+ * This kernel thread is responsible for two things:
+ *
+ * 1) COMMIT:  Every so often we need to commit the current state of the
+ *    filesystem to disk.  The journal thread is responsible for writing
+ *    all of the metadata buffers to disk. If a fast commit is ongoing
+ *    journal thread waits until it's done and then continues from
+ *    there on.
+ *
+ * 2) CHECKPOINT: We cannot reuse a used section of the log file until all
+ *    of the data in that part of the log has been rewritten elsewhere on
+ *    the disk.  Flushing these old buffers to reclaim space in the log is
+ *    known as checkpointing, and this thread is responsible for that job.
+ */
+
+static int kjournald2(void *arg)
+{
+	journal_t *journal = arg;
+	transaction_t *transaction;
+
+	/*
+	 * Set up an interval timer which can be used to trigger a commit wakeup
+	 * after the commit interval expires
+	 */
+	timer_setup(&journal->j_commit_timer, commit_timeout, 0);
+
+	set_freezable();
+
+	/* Record that the journal thread is running */
+	journal->j_task = current;
+	wake_up(&journal->j_wait_done_commit);
+
+	/*
+	 * Make sure that no allocations from this kernel thread will ever
+	 * recurse to the fs layer because we are responsible for the
+	 * transaction commit and any fs involvement might get stuck waiting for
+	 * the trasn. commit.
+	 */
+	memalloc_nofs_save();
+
+	/*
+	 * And now, wait forever for commit wakeup events.
+	 */
+	write_lock(&journal->j_state_lock);
+
+loop:
+	if (journal->j_flags & JBD2_UNMOUNT)
+		goto end_loop;
+
+	jbd2_debug(1, "commit_sequence=%u, commit_request=%u\n",
+		journal->j_commit_sequence, journal->j_commit_request);
+
+	if (journal->j_commit_sequence != journal->j_commit_request) {
+		jbd2_debug(1, "OK, requests differ\n");
+		write_unlock(&journal->j_state_lock);
+		del_timer_sync(&journal->j_commit_timer);
+		jbd2_journal_commit_transaction(journal);
+		write_lock(&journal->j_state_lock);
+		goto loop;
+	}
+
+	wake_up(&journal->j_wait_done_commit);
+	if (freezing(current)) {
+		/*
+		 * The simpler the better. Flushing journal isn't a
+		 * good idea, because that depends on threads that may
+		 * be already stopped.
+		 */
+		jbd2_debug(1, "Now suspending kjournald2\n");
+		write_unlock(&journal->j_state_lock);
+		try_to_freeze();
+		write_lock(&journal->j_state_lock);
+	} else {
+		/*
+		 * We assume on resume that commits are already there,
+		 * so we don't sleep
+		 */
+		DEFINE_WAIT(wait);
+		int should_sleep = 1;
+
+		prepare_to_wait(&journal->j_wait_commit, &wait,
+				TASK_INTERRUPTIBLE);
+		if (journal->j_commit_sequence != journal->j_commit_request)
+			should_sleep = 0;
+		transaction = journal->j_running_transaction;
+		if (transaction && time_after_eq(jiffies,
+						transaction->t_expires))
+			should_sleep = 0;
+		if (journal->j_flags & JBD2_UNMOUNT)
+			should_sleep = 0;
+		if (should_sleep) {
+			write_unlock(&journal->j_state_lock);
+			schedule();
+			write_lock(&journal->j_state_lock);
+		}
+		finish_wait(&journal->j_wait_commit, &wait);
+	}
+
+	jbd2_debug(1, "kjournald2 wakes\n");
+
+	/*
+	 * Were we woken up by a commit wakeup event?
+	 */
+	transaction = journal->j_running_transaction;
+	if (transaction && time_after_eq(jiffies, transaction->t_expires)) {
+		journal->j_commit_request = transaction->t_tid;
+		jbd2_debug(1, "woke because of timeout\n");
+	}
+	goto loop;
+
+end_loop:
+	del_timer_sync(&journal->j_commit_timer);
+	journal->j_task = NULL;
+	wake_up(&journal->j_wait_done_commit);
+	jbd2_debug(1, "Journal thread exiting.\n");
+	write_unlock(&journal->j_state_lock);
+	return 0;
+}
+
+static int jbd2_journal_start_thread(journal_t *journal)
+{
+	struct task_struct *t;
+
+	t = kthread_run(kjournald2, journal, "jbd2/%s",
+			journal->j_devname);
+	if (IS_ERR(t))
+		return PTR_ERR(t);
+
+	wait_event(journal->j_wait_done_commit, journal->j_task != NULL);
+	return 0;
+}
+
+static void journal_kill_thread(journal_t *journal)
+{
+	write_lock(&journal->j_state_lock);
+	journal->j_flags |= JBD2_UNMOUNT;
+
+	while (journal->j_task) {
+		write_unlock(&journal->j_state_lock);
+		wake_up(&journal->j_wait_commit);
+		wait_event(journal->j_wait_done_commit, journal->j_task == NULL);
+		write_lock(&journal->j_state_lock);
+	}
+	write_unlock(&journal->j_state_lock);
+}
+
+/*
+ * jbd2_journal_write_metadata_buffer: write a metadata buffer to the journal.
+ *
+ * Writes a metadata buffer to a given disk block.  The actual IO is not
+ * performed but a new buffer_head is constructed which labels the data
+ * to be written with the correct destination disk block.
+ *
+ * Any magic-number escaping which needs to be done will cause a
+ * copy-out here.  If the buffer happens to start with the
+ * JBD2_MAGIC_NUMBER, then we can't write it to the log directly: the
+ * magic number is only written to the log for descripter blocks.  In
+ * this case, we copy the data and replace the first word with 0, and we
+ * return a result code which indicates that this buffer needs to be
+ * marked as an escaped buffer in the corresponding log descriptor
+ * block.  The missing word can then be restored when the block is read
+ * during recovery.
+ *
+ * If the source buffer has already been modified by a new transaction
+ * since we took the last commit snapshot, we use the frozen copy of
+ * that data for IO. If we end up using the existing buffer_head's data
+ * for the write, then we have to make sure nobody modifies it while the
+ * IO is in progress. do_get_write_access() handles this.
+ *
+ * The function returns a pointer to the buffer_head to be used for IO.
+ *
+ *
+ * Return value:
+ *  <0: Error
+ * >=0: Finished OK
+ *
+ * On success:
+ * Bit 0 set == escape performed on the data
+ * Bit 1 set == buffer copy-out performed (kfree the data after IO)
+ */
+
+int jbd2_journal_write_metadata_buffer(transaction_t *transaction,
+				  struct journal_head  *jh_in,
+				  struct buffer_head **bh_out,
+				  sector_t blocknr)
+{
+	int need_copy_out = 0;
+	int done_copy_out = 0;
+	int do_escape = 0;
+	char *mapped_data;
+	struct buffer_head *new_bh;
+	struct page *new_page;
+	unsigned int new_offset;
+	struct buffer_head *bh_in = jh2bh(jh_in);
+	journal_t *journal = transaction->t_journal;
+
+	/*
+	 * The buffer really shouldn't be locked: only the current committing
+	 * transaction is allowed to write it, so nobody else is allowed
+	 * to do any IO.
+	 *
+	 * akpm: except if we're journalling data, and write() output is
+	 * also part of a shared mapping, and another thread has
+	 * decided to launch a writepage() against this buffer.
+	 */
+	J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in));
+
+	new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL);
+
+	/* keep subsequent assertions sane */
+	atomic_set(&new_bh->b_count, 1);
+
+	spin_lock(&jh_in->b_state_lock);
+repeat:
+	/*
+	 * If a new transaction has already done a buffer copy-out, then
+	 * we use that version of the data for the commit.
+	 */
+	if (jh_in->b_frozen_data) {
+		done_copy_out = 1;
+		new_page = virt_to_page(jh_in->b_frozen_data);
+		new_offset = offset_in_page(jh_in->b_frozen_data);
+	} else {
+		new_page = jh2bh(jh_in)->b_page;
+		new_offset = offset_in_page(jh2bh(jh_in)->b_data);
+	}
+
+	mapped_data = kmap_atomic(new_page);
+	/*
+	 * Fire data frozen trigger if data already wasn't frozen.  Do this
+	 * before checking for escaping, as the trigger may modify the magic
+	 * offset.  If a copy-out happens afterwards, it will have the correct
+	 * data in the buffer.
+	 */
+	if (!done_copy_out)
+		jbd2_buffer_frozen_trigger(jh_in, mapped_data + new_offset,
+					   jh_in->b_triggers);
+
+	/*
+	 * Check for escaping
+	 */
+	if (*((__be32 *)(mapped_data + new_offset)) ==
+				cpu_to_be32(JBD2_MAGIC_NUMBER)) {
+		need_copy_out = 1;
+		do_escape = 1;
+	}
+	kunmap_atomic(mapped_data);
+
+	/*
+	 * Do we need to do a data copy?
+	 */
+	if (need_copy_out && !done_copy_out) {
+		char *tmp;
+
+		spin_unlock(&jh_in->b_state_lock);
+		tmp = jbd2_alloc(bh_in->b_size, GFP_NOFS);
+		if (!tmp) {
+			brelse(new_bh);
+			return -ENOMEM;
+		}
+		spin_lock(&jh_in->b_state_lock);
+		if (jh_in->b_frozen_data) {
+			jbd2_free(tmp, bh_in->b_size);
+			goto repeat;
+		}
+
+		jh_in->b_frozen_data = tmp;
+		mapped_data = kmap_atomic(new_page);
+		memcpy(tmp, mapped_data + new_offset, bh_in->b_size);
+		kunmap_atomic(mapped_data);
+
+		new_page = virt_to_page(tmp);
+		new_offset = offset_in_page(tmp);
+		done_copy_out = 1;
+
+		/*
+		 * This isn't strictly necessary, as we're using frozen
+		 * data for the escaping, but it keeps consistency with
+		 * b_frozen_data usage.
+		 */
+		jh_in->b_frozen_triggers = jh_in->b_triggers;
+	}
+
+	/*
+	 * Did we need to do an escaping?  Now we've done all the
+	 * copying, we can finally do so.
+	 */
+	if (do_escape) {
+		mapped_data = kmap_atomic(new_page);
+		*((unsigned int *)(mapped_data + new_offset)) = 0;
+		kunmap_atomic(mapped_data);
+	}
+
+	set_bh_page(new_bh, new_page, new_offset);
+	new_bh->b_size = bh_in->b_size;
+	new_bh->b_bdev = journal->j_dev;
+	new_bh->b_blocknr = blocknr;
+	new_bh->b_private = bh_in;
+	set_buffer_mapped(new_bh);
+	set_buffer_dirty(new_bh);
+
+	*bh_out = new_bh;
+
+	/*
+	 * The to-be-written buffer needs to get moved to the io queue,
+	 * and the original buffer whose contents we are shadowing or
+	 * copying is moved to the transaction's shadow queue.
+	 */
+	JBUFFER_TRACE(jh_in, "file as BJ_Shadow");
+	spin_lock(&journal->j_list_lock);
+	__jbd2_journal_file_buffer(jh_in, transaction, BJ_Shadow);
+	spin_unlock(&journal->j_list_lock);
+	set_buffer_shadow(bh_in);
+	spin_unlock(&jh_in->b_state_lock);
+
+	return do_escape | (done_copy_out << 1);
+}
+
+/*
+ * Allocation code for the journal file.  Manage the space left in the
+ * journal, so that we can begin checkpointing when appropriate.
+ */
+
+/*
+ * Called with j_state_lock locked for writing.
+ * Returns true if a transaction commit was started.
+ */
+static int __jbd2_log_start_commit(journal_t *journal, tid_t target)
+{
+	/* Return if the txn has already requested to be committed */
+	if (journal->j_commit_request == target)
+		return 0;
+
+	/*
+	 * The only transaction we can possibly wait upon is the
+	 * currently running transaction (if it exists).  Otherwise,
+	 * the target tid must be an old one.
+	 */
+	if (journal->j_running_transaction &&
+	    journal->j_running_transaction->t_tid == target) {
+		/*
+		 * We want a new commit: OK, mark the request and wakeup the
+		 * commit thread.  We do _not_ do the commit ourselves.
+		 */
+
+		journal->j_commit_request = target;
+		jbd2_debug(1, "JBD2: requesting commit %u/%u\n",
+			  journal->j_commit_request,
+			  journal->j_commit_sequence);
+		journal->j_running_transaction->t_requested = jiffies;
+		wake_up(&journal->j_wait_commit);
+		return 1;
+	} else if (!tid_geq(journal->j_commit_request, target))
+		/* This should never happen, but if it does, preserve
+		   the evidence before kjournald goes into a loop and
+		   increments j_commit_sequence beyond all recognition. */
+		WARN_ONCE(1, "JBD2: bad log_start_commit: %u %u %u %u\n",
+			  journal->j_commit_request,
+			  journal->j_commit_sequence,
+			  target, journal->j_running_transaction ?
+			  journal->j_running_transaction->t_tid : 0);
+	return 0;
+}
+
+int jbd2_log_start_commit(journal_t *journal, tid_t tid)
+{
+	int ret;
+
+	write_lock(&journal->j_state_lock);
+	ret = __jbd2_log_start_commit(journal, tid);
+	write_unlock(&journal->j_state_lock);
+	return ret;
+}
+
+/*
+ * Force and wait any uncommitted transactions.  We can only force the running
+ * transaction if we don't have an active handle, otherwise, we will deadlock.
+ * Returns: <0 in case of error,
+ *           0 if nothing to commit,
+ *           1 if transaction was successfully committed.
+ */
+static int __jbd2_journal_force_commit(journal_t *journal)
+{
+	transaction_t *transaction = NULL;
+	tid_t tid;
+	int need_to_start = 0, ret = 0;
+
+	read_lock(&journal->j_state_lock);
+	if (journal->j_running_transaction && !current->journal_info) {
+		transaction = journal->j_running_transaction;
+		if (!tid_geq(journal->j_commit_request, transaction->t_tid))
+			need_to_start = 1;
+	} else if (journal->j_committing_transaction)
+		transaction = journal->j_committing_transaction;
+
+	if (!transaction) {
+		/* Nothing to commit */
+		read_unlock(&journal->j_state_lock);
+		return 0;
+	}
+	tid = transaction->t_tid;
+	read_unlock(&journal->j_state_lock);
+	if (need_to_start)
+		jbd2_log_start_commit(journal, tid);
+	ret = jbd2_log_wait_commit(journal, tid);
+	if (!ret)
+		ret = 1;
+
+	return ret;
+}
+
+/**
+ * jbd2_journal_force_commit_nested - Force and wait upon a commit if the
+ * calling process is not within transaction.
+ *
+ * @journal: journal to force
+ * Returns true if progress was made.
+ *
+ * This is used for forcing out undo-protected data which contains
+ * bitmaps, when the fs is running out of space.
+ */
+int jbd2_journal_force_commit_nested(journal_t *journal)
+{
+	int ret;
+
+	ret = __jbd2_journal_force_commit(journal);
+	return ret > 0;
+}
+
+/**
+ * jbd2_journal_force_commit() - force any uncommitted transactions
+ * @journal: journal to force
+ *
+ * Caller want unconditional commit. We can only force the running transaction
+ * if we don't have an active handle, otherwise, we will deadlock.
+ */
+int jbd2_journal_force_commit(journal_t *journal)
+{
+	int ret;
+
+	J_ASSERT(!current->journal_info);
+	ret = __jbd2_journal_force_commit(journal);
+	if (ret > 0)
+		ret = 0;
+	return ret;
+}
+
+/*
+ * Start a commit of the current running transaction (if any).  Returns true
+ * if a transaction is going to be committed (or is currently already
+ * committing), and fills its tid in at *ptid
+ */
+int jbd2_journal_start_commit(journal_t *journal, tid_t *ptid)
+{
+	int ret = 0;
+
+	write_lock(&journal->j_state_lock);
+	if (journal->j_running_transaction) {
+		tid_t tid = journal->j_running_transaction->t_tid;
+
+		__jbd2_log_start_commit(journal, tid);
+		/* There's a running transaction and we've just made sure
+		 * it's commit has been scheduled. */
+		if (ptid)
+			*ptid = tid;
+		ret = 1;
+	} else if (journal->j_committing_transaction) {
+		/*
+		 * If commit has been started, then we have to wait for
+		 * completion of that transaction.
+		 */
+		if (ptid)
+			*ptid = journal->j_committing_transaction->t_tid;
+		ret = 1;
+	}
+	write_unlock(&journal->j_state_lock);
+	return ret;
+}
+
+/*
+ * Return 1 if a given transaction has not yet sent barrier request
+ * connected with a transaction commit. If 0 is returned, transaction
+ * may or may not have sent the barrier. Used to avoid sending barrier
+ * twice in common cases.
+ */
+int jbd2_trans_will_send_data_barrier(journal_t *journal, tid_t tid)
+{
+	int ret = 0;
+	transaction_t *commit_trans;
+
+	if (!(journal->j_flags & JBD2_BARRIER))
+		return 0;
+	read_lock(&journal->j_state_lock);
+	/* Transaction already committed? */
+	if (tid_geq(journal->j_commit_sequence, tid))
+		goto out;
+	commit_trans = journal->j_committing_transaction;
+	if (!commit_trans || commit_trans->t_tid != tid) {
+		ret = 1;
+		goto out;
+	}
+	/*
+	 * Transaction is being committed and we already proceeded to
+	 * submitting a flush to fs partition?
+	 */
+	if (journal->j_fs_dev != journal->j_dev) {
+		if (!commit_trans->t_need_data_flush ||
+		    commit_trans->t_state >= T_COMMIT_DFLUSH)
+			goto out;
+	} else {
+		if (commit_trans->t_state >= T_COMMIT_JFLUSH)
+			goto out;
+	}
+	ret = 1;
+out:
+	read_unlock(&journal->j_state_lock);
+	return ret;
+}
+EXPORT_SYMBOL(jbd2_trans_will_send_data_barrier);
+
+/*
+ * Wait for a specified commit to complete.
+ * The caller may not hold the journal lock.
+ */
+int jbd2_log_wait_commit(journal_t *journal, tid_t tid)
+{
+	int err = 0;
+
+	read_lock(&journal->j_state_lock);
+#ifdef CONFIG_PROVE_LOCKING
+	/*
+	 * Some callers make sure transaction is already committing and in that
+	 * case we cannot block on open handles anymore. So don't warn in that
+	 * case.
+	 */
+	if (tid_gt(tid, journal->j_commit_sequence) &&
+	    (!journal->j_committing_transaction ||
+	     journal->j_committing_transaction->t_tid != tid)) {
+		read_unlock(&journal->j_state_lock);
+		jbd2_might_wait_for_commit(journal);
+		read_lock(&journal->j_state_lock);
+	}
+#endif
+#ifdef CONFIG_JBD2_DEBUG
+	if (!tid_geq(journal->j_commit_request, tid)) {
+		printk(KERN_ERR
+		       "%s: error: j_commit_request=%u, tid=%u\n",
+		       __func__, journal->j_commit_request, tid);
+	}
+#endif
+	while (tid_gt(tid, journal->j_commit_sequence)) {
+		jbd2_debug(1, "JBD2: want %u, j_commit_sequence=%u\n",
+				  tid, journal->j_commit_sequence);
+		read_unlock(&journal->j_state_lock);
+		wake_up(&journal->j_wait_commit);
+		wait_event(journal->j_wait_done_commit,
+				!tid_gt(tid, journal->j_commit_sequence));
+		read_lock(&journal->j_state_lock);
+	}
+	read_unlock(&journal->j_state_lock);
+
+	if (unlikely(is_journal_aborted(journal)))
+		err = -EIO;
+	return err;
+}
+
+/*
+ * Start a fast commit. If there's an ongoing fast or full commit wait for
+ * it to complete. Returns 0 if a new fast commit was started. Returns -EALREADY
+ * if a fast commit is not needed, either because there's an already a commit
+ * going on or this tid has already been committed. Returns -EINVAL if no jbd2
+ * commit has yet been performed.
+ */
+int jbd2_fc_begin_commit(journal_t *journal, tid_t tid)
+{
+	if (unlikely(is_journal_aborted(journal)))
+		return -EIO;
+	/*
+	 * Fast commits only allowed if at least one full commit has
+	 * been processed.
+	 */
+	if (!journal->j_stats.ts_tid)
+		return -EINVAL;
+
+	write_lock(&journal->j_state_lock);
+	if (tid <= journal->j_commit_sequence) {
+		write_unlock(&journal->j_state_lock);
+		return -EALREADY;
+	}
+
+	if (journal->j_flags & JBD2_FULL_COMMIT_ONGOING ||
+	    (journal->j_flags & JBD2_FAST_COMMIT_ONGOING)) {
+		DEFINE_WAIT(wait);
+
+		prepare_to_wait(&journal->j_fc_wait, &wait,
+				TASK_UNINTERRUPTIBLE);
+		write_unlock(&journal->j_state_lock);
+		schedule();
+		finish_wait(&journal->j_fc_wait, &wait);
+		return -EALREADY;
+	}
+	journal->j_flags |= JBD2_FAST_COMMIT_ONGOING;
+	write_unlock(&journal->j_state_lock);
+	jbd2_journal_lock_updates(journal);
+
+	return 0;
+}
+EXPORT_SYMBOL(jbd2_fc_begin_commit);
+
+/*
+ * Stop a fast commit. If fallback is set, this function starts commit of
+ * TID tid before any other fast commit can start.
+ */
+static int __jbd2_fc_end_commit(journal_t *journal, tid_t tid, bool fallback)
+{
+	jbd2_journal_unlock_updates(journal);
+	if (journal->j_fc_cleanup_callback)
+		journal->j_fc_cleanup_callback(journal, 0, tid);
+	write_lock(&journal->j_state_lock);
+	journal->j_flags &= ~JBD2_FAST_COMMIT_ONGOING;
+	if (fallback)
+		journal->j_flags |= JBD2_FULL_COMMIT_ONGOING;
+	write_unlock(&journal->j_state_lock);
+	wake_up(&journal->j_fc_wait);
+	if (fallback)
+		return jbd2_complete_transaction(journal, tid);
+	return 0;
+}
+
+int jbd2_fc_end_commit(journal_t *journal)
+{
+	return __jbd2_fc_end_commit(journal, 0, false);
+}
+EXPORT_SYMBOL(jbd2_fc_end_commit);
+
+int jbd2_fc_end_commit_fallback(journal_t *journal)
+{
+	tid_t tid;
+
+	read_lock(&journal->j_state_lock);
+	tid = journal->j_running_transaction ?
+		journal->j_running_transaction->t_tid : 0;
+	read_unlock(&journal->j_state_lock);
+	return __jbd2_fc_end_commit(journal, tid, true);
+}
+EXPORT_SYMBOL(jbd2_fc_end_commit_fallback);
+
+/* Return 1 when transaction with given tid has already committed. */
+int jbd2_transaction_committed(journal_t *journal, tid_t tid)
+{
+	int ret = 1;
+
+	read_lock(&journal->j_state_lock);
+	if (journal->j_running_transaction &&
+	    journal->j_running_transaction->t_tid == tid)
+		ret = 0;
+	if (journal->j_committing_transaction &&
+	    journal->j_committing_transaction->t_tid == tid)
+		ret = 0;
+	read_unlock(&journal->j_state_lock);
+	return ret;
+}
+EXPORT_SYMBOL(jbd2_transaction_committed);
+
+/*
+ * When this function returns the transaction corresponding to tid
+ * will be completed.  If the transaction has currently running, start
+ * committing that transaction before waiting for it to complete.  If
+ * the transaction id is stale, it is by definition already completed,
+ * so just return SUCCESS.
+ */
+int jbd2_complete_transaction(journal_t *journal, tid_t tid)
+{
+	int	need_to_wait = 1;
+
+	read_lock(&journal->j_state_lock);
+	if (journal->j_running_transaction &&
+	    journal->j_running_transaction->t_tid == tid) {
+		if (journal->j_commit_request != tid) {
+			/* transaction not yet started, so request it */
+			read_unlock(&journal->j_state_lock);
+			jbd2_log_start_commit(journal, tid);
+			goto wait_commit;
+		}
+	} else if (!(journal->j_committing_transaction &&
+		     journal->j_committing_transaction->t_tid == tid))
+		need_to_wait = 0;
+	read_unlock(&journal->j_state_lock);
+	if (!need_to_wait)
+		return 0;
+wait_commit:
+	return jbd2_log_wait_commit(journal, tid);
+}
+EXPORT_SYMBOL(jbd2_complete_transaction);
+
+/*
+ * Log buffer allocation routines:
+ */
+
+int jbd2_journal_next_log_block(journal_t *journal, unsigned long long *retp)
+{
+	unsigned long blocknr;
+
+	write_lock(&journal->j_state_lock);
+	J_ASSERT(journal->j_free > 1);
+
+	blocknr = journal->j_head;
+	journal->j_head++;
+	journal->j_free--;
+	if (journal->j_head == journal->j_last)
+		journal->j_head = journal->j_first;
+	write_unlock(&journal->j_state_lock);
+	return jbd2_journal_bmap(journal, blocknr, retp);
+}
+
+/* Map one fast commit buffer for use by the file system */
+int jbd2_fc_get_buf(journal_t *journal, struct buffer_head **bh_out)
+{
+	unsigned long long pblock;
+	unsigned long blocknr;
+	int ret = 0;
+	struct buffer_head *bh;
+	int fc_off;
+
+	*bh_out = NULL;
+
+	if (journal->j_fc_off + journal->j_fc_first < journal->j_fc_last) {
+		fc_off = journal->j_fc_off;
+		blocknr = journal->j_fc_first + fc_off;
+		journal->j_fc_off++;
+	} else {
+		ret = -EINVAL;
+	}
+
+	if (ret)
+		return ret;
+
+	ret = jbd2_journal_bmap(journal, blocknr, &pblock);
+	if (ret)
+		return ret;
+
+	bh = __getblk(journal->j_dev, pblock, journal->j_blocksize);
+	if (!bh)
+		return -ENOMEM;
+
+
+	journal->j_fc_wbuf[fc_off] = bh;
+
+	*bh_out = bh;
+
+	return 0;
+}
+EXPORT_SYMBOL(jbd2_fc_get_buf);
+
+/*
+ * Wait on fast commit buffers that were allocated by jbd2_fc_get_buf
+ * for completion.
+ */
+int jbd2_fc_wait_bufs(journal_t *journal, int num_blks)
+{
+	struct buffer_head *bh;
+	int i, j_fc_off;
+
+	j_fc_off = journal->j_fc_off;
+
+	/*
+	 * Wait in reverse order to minimize chances of us being woken up before
+	 * all IOs have completed
+	 */
+	for (i = j_fc_off - 1; i >= j_fc_off - num_blks; i--) {
+		bh = journal->j_fc_wbuf[i];
+		wait_on_buffer(bh);
+		/*
+		 * Update j_fc_off so jbd2_fc_release_bufs can release remain
+		 * buffer head.
+		 */
+		if (unlikely(!buffer_uptodate(bh))) {
+			journal->j_fc_off = i + 1;
+			return -EIO;
+		}
+		put_bh(bh);
+		journal->j_fc_wbuf[i] = NULL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(jbd2_fc_wait_bufs);
+
+int jbd2_fc_release_bufs(journal_t *journal)
+{
+	struct buffer_head *bh;
+	int i, j_fc_off;
+
+	j_fc_off = journal->j_fc_off;
+
+	for (i = j_fc_off - 1; i >= 0; i--) {
+		bh = journal->j_fc_wbuf[i];
+		if (!bh)
+			break;
+		put_bh(bh);
+		journal->j_fc_wbuf[i] = NULL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(jbd2_fc_release_bufs);
+
+/*
+ * Conversion of logical to physical block numbers for the journal
+ *
+ * On external journals the journal blocks are identity-mapped, so
+ * this is a no-op.  If needed, we can use j_blk_offset - everything is
+ * ready.
+ */
+int jbd2_journal_bmap(journal_t *journal, unsigned long blocknr,
+		 unsigned long long *retp)
+{
+	int err = 0;
+	unsigned long long ret;
+	sector_t block = 0;
+
+	if (journal->j_inode) {
+		block = blocknr;
+		ret = bmap(journal->j_inode, &block);
+
+		if (ret || !block) {
+			printk(KERN_ALERT "%s: journal block not found "
+					"at offset %lu on %s\n",
+			       __func__, blocknr, journal->j_devname);
+			err = -EIO;
+			jbd2_journal_abort(journal, err);
+		} else {
+			*retp = block;
+		}
+
+	} else {
+		*retp = blocknr; /* +journal->j_blk_offset */
+	}
+	return err;
+}
+
+/*
+ * We play buffer_head aliasing tricks to write data/metadata blocks to
+ * the journal without copying their contents, but for journal
+ * descriptor blocks we do need to generate bona fide buffers.
+ *
+ * After the caller of jbd2_journal_get_descriptor_buffer() has finished modifying
+ * the buffer's contents they really should run flush_dcache_page(bh->b_page).
+ * But we don't bother doing that, so there will be coherency problems with
+ * mmaps of blockdevs which hold live JBD-controlled filesystems.
+ */
+struct buffer_head *
+jbd2_journal_get_descriptor_buffer(transaction_t *transaction, int type)
+{
+	journal_t *journal = transaction->t_journal;
+	struct buffer_head *bh;
+	unsigned long long blocknr;
+	journal_header_t *header;
+	int err;
+
+	err = jbd2_journal_next_log_block(journal, &blocknr);
+
+	if (err)
+		return NULL;
+
+	bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
+	if (!bh)
+		return NULL;
+	atomic_dec(&transaction->t_outstanding_credits);
+	lock_buffer(bh);
+	memset(bh->b_data, 0, journal->j_blocksize);
+	header = (journal_header_t *)bh->b_data;
+	header->h_magic = cpu_to_be32(JBD2_MAGIC_NUMBER);
+	header->h_blocktype = cpu_to_be32(type);
+	header->h_sequence = cpu_to_be32(transaction->t_tid);
+	set_buffer_uptodate(bh);
+	unlock_buffer(bh);
+	BUFFER_TRACE(bh, "return this buffer");
+	return bh;
+}
+
+void jbd2_descriptor_block_csum_set(journal_t *j, struct buffer_head *bh)
+{
+	struct jbd2_journal_block_tail *tail;
+	__u32 csum;
+
+	if (!jbd2_journal_has_csum_v2or3(j))
+		return;
+
+	tail = (struct jbd2_journal_block_tail *)(bh->b_data + j->j_blocksize -
+			sizeof(struct jbd2_journal_block_tail));
+	tail->t_checksum = 0;
+	csum = jbd2_chksum(j, j->j_csum_seed, bh->b_data, j->j_blocksize);
+	tail->t_checksum = cpu_to_be32(csum);
+}
+
+/*
+ * Return tid of the oldest transaction in the journal and block in the journal
+ * where the transaction starts.
+ *
+ * If the journal is now empty, return which will be the next transaction ID
+ * we will write and where will that transaction start.
+ *
+ * The return value is 0 if journal tail cannot be pushed any further, 1 if
+ * it can.
+ */
+int jbd2_journal_get_log_tail(journal_t *journal, tid_t *tid,
+			      unsigned long *block)
+{
+	transaction_t *transaction;
+	int ret;
+
+	read_lock(&journal->j_state_lock);
+	spin_lock(&journal->j_list_lock);
+	transaction = journal->j_checkpoint_transactions;
+	if (transaction) {
+		*tid = transaction->t_tid;
+		*block = transaction->t_log_start;
+	} else if ((transaction = journal->j_committing_transaction) != NULL) {
+		*tid = transaction->t_tid;
+		*block = transaction->t_log_start;
+	} else if ((transaction = journal->j_running_transaction) != NULL) {
+		*tid = transaction->t_tid;
+		*block = journal->j_head;
+	} else {
+		*tid = journal->j_transaction_sequence;
+		*block = journal->j_head;
+	}
+	ret = tid_gt(*tid, journal->j_tail_sequence);
+	spin_unlock(&journal->j_list_lock);
+	read_unlock(&journal->j_state_lock);
+
+	return ret;
+}
+
+/*
+ * Update information in journal structure and in on disk journal superblock
+ * about log tail. This function does not check whether information passed in
+ * really pushes log tail further. It's responsibility of the caller to make
+ * sure provided log tail information is valid (e.g. by holding
+ * j_checkpoint_mutex all the time between computing log tail and calling this
+ * function as is the case with jbd2_cleanup_journal_tail()).
+ *
+ * Requires j_checkpoint_mutex
+ */
+int __jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block)
+{
+	unsigned long freed;
+	int ret;
+
+	BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex));
+
+	/*
+	 * We cannot afford for write to remain in drive's caches since as
+	 * soon as we update j_tail, next transaction can start reusing journal
+	 * space and if we lose sb update during power failure we'd replay
+	 * old transaction with possibly newly overwritten data.
+	 */
+	ret = jbd2_journal_update_sb_log_tail(journal, tid, block, REQ_FUA);
+	if (ret)
+		goto out;
+
+	write_lock(&journal->j_state_lock);
+	freed = block - journal->j_tail;
+	if (block < journal->j_tail)
+		freed += journal->j_last - journal->j_first;
+
+	trace_jbd2_update_log_tail(journal, tid, block, freed);
+	jbd2_debug(1,
+		  "Cleaning journal tail from %u to %u (offset %lu), "
+		  "freeing %lu\n",
+		  journal->j_tail_sequence, tid, block, freed);
+
+	journal->j_free += freed;
+	journal->j_tail_sequence = tid;
+	journal->j_tail = block;
+	write_unlock(&journal->j_state_lock);
+
+out:
+	return ret;
+}
+
+/*
+ * This is a variation of __jbd2_update_log_tail which checks for validity of
+ * provided log tail and locks j_checkpoint_mutex. So it is safe against races
+ * with other threads updating log tail.
+ */
+void jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block)
+{
+	mutex_lock_io(&journal->j_checkpoint_mutex);
+	if (tid_gt(tid, journal->j_tail_sequence))
+		__jbd2_update_log_tail(journal, tid, block);
+	mutex_unlock(&journal->j_checkpoint_mutex);
+}
+
+struct jbd2_stats_proc_session {
+	journal_t *journal;
+	struct transaction_stats_s *stats;
+	int start;
+	int max;
+};
+
+static void *jbd2_seq_info_start(struct seq_file *seq, loff_t *pos)
+{
+	return *pos ? NULL : SEQ_START_TOKEN;
+}
+
+static void *jbd2_seq_info_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	(*pos)++;
+	return NULL;
+}
+
+static int jbd2_seq_info_show(struct seq_file *seq, void *v)
+{
+	struct jbd2_stats_proc_session *s = seq->private;
+
+	if (v != SEQ_START_TOKEN)
+		return 0;
+	seq_printf(seq, "%lu transactions (%lu requested), "
+		   "each up to %u blocks\n",
+		   s->stats->ts_tid, s->stats->ts_requested,
+		   s->journal->j_max_transaction_buffers);
+	if (s->stats->ts_tid == 0)
+		return 0;
+	seq_printf(seq, "average: \n  %ums waiting for transaction\n",
+	    jiffies_to_msecs(s->stats->run.rs_wait / s->stats->ts_tid));
+	seq_printf(seq, "  %ums request delay\n",
+	    (s->stats->ts_requested == 0) ? 0 :
+	    jiffies_to_msecs(s->stats->run.rs_request_delay /
+			     s->stats->ts_requested));
+	seq_printf(seq, "  %ums running transaction\n",
+	    jiffies_to_msecs(s->stats->run.rs_running / s->stats->ts_tid));
+	seq_printf(seq, "  %ums transaction was being locked\n",
+	    jiffies_to_msecs(s->stats->run.rs_locked / s->stats->ts_tid));
+	seq_printf(seq, "  %ums flushing data (in ordered mode)\n",
+	    jiffies_to_msecs(s->stats->run.rs_flushing / s->stats->ts_tid));
+	seq_printf(seq, "  %ums logging transaction\n",
+	    jiffies_to_msecs(s->stats->run.rs_logging / s->stats->ts_tid));
+	seq_printf(seq, "  %lluus average transaction commit time\n",
+		   div_u64(s->journal->j_average_commit_time, 1000));
+	seq_printf(seq, "  %lu handles per transaction\n",
+	    s->stats->run.rs_handle_count / s->stats->ts_tid);
+	seq_printf(seq, "  %lu blocks per transaction\n",
+	    s->stats->run.rs_blocks / s->stats->ts_tid);
+	seq_printf(seq, "  %lu logged blocks per transaction\n",
+	    s->stats->run.rs_blocks_logged / s->stats->ts_tid);
+	return 0;
+}
+
+static void jbd2_seq_info_stop(struct seq_file *seq, void *v)
+{
+}
+
+static const struct seq_operations jbd2_seq_info_ops = {
+	.start  = jbd2_seq_info_start,
+	.next   = jbd2_seq_info_next,
+	.stop   = jbd2_seq_info_stop,
+	.show   = jbd2_seq_info_show,
+};
+
+static int jbd2_seq_info_open(struct inode *inode, struct file *file)
+{
+	journal_t *journal = pde_data(inode);
+	struct jbd2_stats_proc_session *s;
+	int rc, size;
+
+	s = kmalloc(sizeof(*s), GFP_KERNEL);
+	if (s == NULL)
+		return -ENOMEM;
+	size = sizeof(struct transaction_stats_s);
+	s->stats = kmalloc(size, GFP_KERNEL);
+	if (s->stats == NULL) {
+		kfree(s);
+		return -ENOMEM;
+	}
+	spin_lock(&journal->j_history_lock);
+	memcpy(s->stats, &journal->j_stats, size);
+	s->journal = journal;
+	spin_unlock(&journal->j_history_lock);
+
+	rc = seq_open(file, &jbd2_seq_info_ops);
+	if (rc == 0) {
+		struct seq_file *m = file->private_data;
+		m->private = s;
+	} else {
+		kfree(s->stats);
+		kfree(s);
+	}
+	return rc;
+
+}
+
+static int jbd2_seq_info_release(struct inode *inode, struct file *file)
+{
+	struct seq_file *seq = file->private_data;
+	struct jbd2_stats_proc_session *s = seq->private;
+	kfree(s->stats);
+	kfree(s);
+	return seq_release(inode, file);
+}
+
+static const struct proc_ops jbd2_info_proc_ops = {
+	.proc_open	= jbd2_seq_info_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= jbd2_seq_info_release,
+};
+
+static struct proc_dir_entry *proc_jbd2_stats;
+
+static void jbd2_stats_proc_init(journal_t *journal)
+{
+	journal->j_proc_entry = proc_mkdir(journal->j_devname, proc_jbd2_stats);
+	if (journal->j_proc_entry) {
+		proc_create_data("info", S_IRUGO, journal->j_proc_entry,
+				 &jbd2_info_proc_ops, journal);
+	}
+}
+
+static void jbd2_stats_proc_exit(journal_t *journal)
+{
+	remove_proc_entry("info", journal->j_proc_entry);
+	remove_proc_entry(journal->j_devname, proc_jbd2_stats);
+}
+
+/* Minimum size of descriptor tag */
+static int jbd2_min_tag_size(void)
+{
+	/*
+	 * Tag with 32-bit block numbers does not use last four bytes of the
+	 * structure
+	 */
+	return sizeof(journal_block_tag_t) - 4;
+}
+
+/**
+ * jbd2_journal_shrink_scan()
+ * @shrink: shrinker to work on
+ * @sc: reclaim request to process
+ *
+ * Scan the checkpointed buffer on the checkpoint list and release the
+ * journal_head.
+ */
+static unsigned long jbd2_journal_shrink_scan(struct shrinker *shrink,
+					      struct shrink_control *sc)
+{
+	journal_t *journal = container_of(shrink, journal_t, j_shrinker);
+	unsigned long nr_to_scan = sc->nr_to_scan;
+	unsigned long nr_shrunk;
+	unsigned long count;
+
+	count = percpu_counter_read_positive(&journal->j_checkpoint_jh_count);
+	trace_jbd2_shrink_scan_enter(journal, sc->nr_to_scan, count);
+
+	nr_shrunk = jbd2_journal_shrink_checkpoint_list(journal, &nr_to_scan);
+
+	count = percpu_counter_read_positive(&journal->j_checkpoint_jh_count);
+	trace_jbd2_shrink_scan_exit(journal, nr_to_scan, nr_shrunk, count);
+
+	return nr_shrunk;
+}
+
+/**
+ * jbd2_journal_shrink_count()
+ * @shrink: shrinker to work on
+ * @sc: reclaim request to process
+ *
+ * Count the number of checkpoint buffers on the checkpoint list.
+ */
+static unsigned long jbd2_journal_shrink_count(struct shrinker *shrink,
+					       struct shrink_control *sc)
+{
+	journal_t *journal = container_of(shrink, journal_t, j_shrinker);
+	unsigned long count;
+
+	count = percpu_counter_read_positive(&journal->j_checkpoint_jh_count);
+	trace_jbd2_shrink_count(journal, sc->nr_to_scan, count);
+
+	return count;
+}
+
+/*
+ * Management for journal control blocks: functions to create and
+ * destroy journal_t structures, and to initialise and read existing
+ * journal blocks from disk.  */
+
+/* First: create and setup a journal_t object in memory.  We initialise
+ * very few fields yet: that has to wait until we have created the
+ * journal structures from from scratch, or loaded them from disk. */
+
+static journal_t *journal_init_common(struct block_device *bdev,
+			struct block_device *fs_dev,
+			unsigned long long start, int len, int blocksize)
+{
+	static struct lock_class_key jbd2_trans_commit_key;
+	journal_t *journal;
+	int err;
+	struct buffer_head *bh;
+	int n;
+
+	journal = kzalloc(sizeof(*journal), GFP_KERNEL);
+	if (!journal)
+		return NULL;
+
+	init_waitqueue_head(&journal->j_wait_transaction_locked);
+	init_waitqueue_head(&journal->j_wait_done_commit);
+	init_waitqueue_head(&journal->j_wait_commit);
+	init_waitqueue_head(&journal->j_wait_updates);
+	init_waitqueue_head(&journal->j_wait_reserved);
+	init_waitqueue_head(&journal->j_fc_wait);
+	mutex_init(&journal->j_abort_mutex);
+	mutex_init(&journal->j_barrier);
+	mutex_init(&journal->j_checkpoint_mutex);
+	spin_lock_init(&journal->j_revoke_lock);
+	spin_lock_init(&journal->j_list_lock);
+	rwlock_init(&journal->j_state_lock);
+
+	journal->j_commit_interval = (HZ * JBD2_DEFAULT_MAX_COMMIT_AGE);
+	journal->j_min_batch_time = 0;
+	journal->j_max_batch_time = 15000; /* 15ms */
+	atomic_set(&journal->j_reserved_credits, 0);
+
+	/* The journal is marked for error until we succeed with recovery! */
+	journal->j_flags = JBD2_ABORT;
+
+	/* Set up a default-sized revoke table for the new mount. */
+	err = jbd2_journal_init_revoke(journal, JOURNAL_REVOKE_DEFAULT_HASH);
+	if (err)
+		goto err_cleanup;
+
+	spin_lock_init(&journal->j_history_lock);
+
+	lockdep_init_map(&journal->j_trans_commit_map, "jbd2_handle",
+			 &jbd2_trans_commit_key, 0);
+
+	/* journal descriptor can store up to n blocks -bzzz */
+	journal->j_blocksize = blocksize;
+	journal->j_dev = bdev;
+	journal->j_fs_dev = fs_dev;
+	journal->j_blk_offset = start;
+	journal->j_total_len = len;
+	/* We need enough buffers to write out full descriptor block. */
+	n = journal->j_blocksize / jbd2_min_tag_size();
+	journal->j_wbufsize = n;
+	journal->j_fc_wbuf = NULL;
+	journal->j_wbuf = kmalloc_array(n, sizeof(struct buffer_head *),
+					GFP_KERNEL);
+	if (!journal->j_wbuf)
+		goto err_cleanup;
+
+	bh = getblk_unmovable(journal->j_dev, start, journal->j_blocksize);
+	if (!bh) {
+		pr_err("%s: Cannot get buffer for journal superblock\n",
+			__func__);
+		goto err_cleanup;
+	}
+	journal->j_sb_buffer = bh;
+	journal->j_superblock = (journal_superblock_t *)bh->b_data;
+
+	journal->j_shrink_transaction = NULL;
+	journal->j_shrinker.scan_objects = jbd2_journal_shrink_scan;
+	journal->j_shrinker.count_objects = jbd2_journal_shrink_count;
+	journal->j_shrinker.seeks = DEFAULT_SEEKS;
+	journal->j_shrinker.batch = journal->j_max_transaction_buffers;
+
+	if (percpu_counter_init(&journal->j_checkpoint_jh_count, 0, GFP_KERNEL))
+		goto err_cleanup;
+
+	if (register_shrinker(&journal->j_shrinker, "jbd2-journal:(%u:%u)",
+			      MAJOR(bdev->bd_dev), MINOR(bdev->bd_dev))) {
+		percpu_counter_destroy(&journal->j_checkpoint_jh_count);
+		goto err_cleanup;
+	}
+	return journal;
+
+err_cleanup:
+	brelse(journal->j_sb_buffer);
+	kfree(journal->j_wbuf);
+	jbd2_journal_destroy_revoke(journal);
+	kfree(journal);
+	return NULL;
+}
+
+/* jbd2_journal_init_dev and jbd2_journal_init_inode:
+ *
+ * Create a journal structure assigned some fixed set of disk blocks to
+ * the journal.  We don't actually touch those disk blocks yet, but we
+ * need to set up all of the mapping information to tell the journaling
+ * system where the journal blocks are.
+ *
+ */
+
+/**
+ *  journal_t * jbd2_journal_init_dev() - creates and initialises a journal structure
+ *  @bdev: Block device on which to create the journal
+ *  @fs_dev: Device which hold journalled filesystem for this journal.
+ *  @start: Block nr Start of journal.
+ *  @len:  Length of the journal in blocks.
+ *  @blocksize: blocksize of journalling device
+ *
+ *  Returns: a newly created journal_t *
+ *
+ *  jbd2_journal_init_dev creates a journal which maps a fixed contiguous
+ *  range of blocks on an arbitrary block device.
+ *
+ */
+journal_t *jbd2_journal_init_dev(struct block_device *bdev,
+			struct block_device *fs_dev,
+			unsigned long long start, int len, int blocksize)
+{
+	journal_t *journal;
+
+	journal = journal_init_common(bdev, fs_dev, start, len, blocksize);
+	if (!journal)
+		return NULL;
+
+	snprintf(journal->j_devname, sizeof(journal->j_devname),
+		 "%pg", journal->j_dev);
+	strreplace(journal->j_devname, '/', '!');
+	jbd2_stats_proc_init(journal);
+
+	return journal;
+}
+
+/**
+ *  journal_t * jbd2_journal_init_inode () - creates a journal which maps to a inode.
+ *  @inode: An inode to create the journal in
+ *
+ * jbd2_journal_init_inode creates a journal which maps an on-disk inode as
+ * the journal.  The inode must exist already, must support bmap() and
+ * must have all data blocks preallocated.
+ */
+journal_t *jbd2_journal_init_inode(struct inode *inode)
+{
+	journal_t *journal;
+	sector_t blocknr;
+	char *p;
+	int err = 0;
+
+	blocknr = 0;
+	err = bmap(inode, &blocknr);
+
+	if (err || !blocknr) {
+		pr_err("%s: Cannot locate journal superblock\n",
+			__func__);
+		return NULL;
+	}
+
+	jbd2_debug(1, "JBD2: inode %s/%ld, size %lld, bits %d, blksize %ld\n",
+		  inode->i_sb->s_id, inode->i_ino, (long long) inode->i_size,
+		  inode->i_sb->s_blocksize_bits, inode->i_sb->s_blocksize);
+
+	journal = journal_init_common(inode->i_sb->s_bdev, inode->i_sb->s_bdev,
+			blocknr, inode->i_size >> inode->i_sb->s_blocksize_bits,
+			inode->i_sb->s_blocksize);
+	if (!journal)
+		return NULL;
+
+	journal->j_inode = inode;
+	snprintf(journal->j_devname, sizeof(journal->j_devname),
+		 "%pg", journal->j_dev);
+	p = strreplace(journal->j_devname, '/', '!');
+	sprintf(p, "-%lu", journal->j_inode->i_ino);
+	jbd2_stats_proc_init(journal);
+
+	return journal;
+}
+
+/*
+ * If the journal init or create aborts, we need to mark the journal
+ * superblock as being NULL to prevent the journal destroy from writing
+ * back a bogus superblock.
+ */
+static void journal_fail_superblock(journal_t *journal)
+{
+	struct buffer_head *bh = journal->j_sb_buffer;
+	brelse(bh);
+	journal->j_sb_buffer = NULL;
+}
+
+/*
+ * Given a journal_t structure, initialise the various fields for
+ * startup of a new journaling session.  We use this both when creating
+ * a journal, and after recovering an old journal to reset it for
+ * subsequent use.
+ */
+
+static int journal_reset(journal_t *journal)
+{
+	journal_superblock_t *sb = journal->j_superblock;
+	unsigned long long first, last;
+
+	first = be32_to_cpu(sb->s_first);
+	last = be32_to_cpu(sb->s_maxlen);
+	if (first + JBD2_MIN_JOURNAL_BLOCKS > last + 1) {
+		printk(KERN_ERR "JBD2: Journal too short (blocks %llu-%llu).\n",
+		       first, last);
+		journal_fail_superblock(journal);
+		return -EINVAL;
+	}
+
+	journal->j_first = first;
+	journal->j_last = last;
+
+	journal->j_head = journal->j_first;
+	journal->j_tail = journal->j_first;
+	journal->j_free = journal->j_last - journal->j_first;
+
+	journal->j_tail_sequence = journal->j_transaction_sequence;
+	journal->j_commit_sequence = journal->j_transaction_sequence - 1;
+	journal->j_commit_request = journal->j_commit_sequence;
+
+	journal->j_max_transaction_buffers = jbd2_journal_get_max_txn_bufs(journal);
+
+	/*
+	 * Now that journal recovery is done, turn fast commits off here. This
+	 * way, if fast commit was enabled before the crash but if now FS has
+	 * disabled it, we don't enable fast commits.
+	 */
+	jbd2_clear_feature_fast_commit(journal);
+
+	/*
+	 * As a special case, if the on-disk copy is already marked as needing
+	 * no recovery (s_start == 0), then we can safely defer the superblock
+	 * update until the next commit by setting JBD2_FLUSHED.  This avoids
+	 * attempting a write to a potential-readonly device.
+	 */
+	if (sb->s_start == 0) {
+		jbd2_debug(1, "JBD2: Skipping superblock update on recovered sb "
+			"(start %ld, seq %u, errno %d)\n",
+			journal->j_tail, journal->j_tail_sequence,
+			journal->j_errno);
+		journal->j_flags |= JBD2_FLUSHED;
+	} else {
+		/* Lock here to make assertions happy... */
+		mutex_lock_io(&journal->j_checkpoint_mutex);
+		/*
+		 * Update log tail information. We use REQ_FUA since new
+		 * transaction will start reusing journal space and so we
+		 * must make sure information about current log tail is on
+		 * disk before that.
+		 */
+		jbd2_journal_update_sb_log_tail(journal,
+						journal->j_tail_sequence,
+						journal->j_tail, REQ_FUA);
+		mutex_unlock(&journal->j_checkpoint_mutex);
+	}
+	return jbd2_journal_start_thread(journal);
+}
+
+/*
+ * This function expects that the caller will have locked the journal
+ * buffer head, and will return with it unlocked
+ */
+static int jbd2_write_superblock(journal_t *journal, blk_opf_t write_flags)
+{
+	struct buffer_head *bh = journal->j_sb_buffer;
+	journal_superblock_t *sb = journal->j_superblock;
+	int ret = 0;
+
+	/* Buffer got discarded which means block device got invalidated */
+	if (!buffer_mapped(bh)) {
+		unlock_buffer(bh);
+		return -EIO;
+	}
+
+	/*
+	 * Always set high priority flags to exempt from block layer's
+	 * QOS policies, e.g. writeback throttle.
+	 */
+	write_flags |= JBD2_JOURNAL_REQ_FLAGS;
+	if (!(journal->j_flags & JBD2_BARRIER))
+		write_flags &= ~(REQ_FUA | REQ_PREFLUSH);
+
+	trace_jbd2_write_superblock(journal, write_flags);
+
+	if (buffer_write_io_error(bh)) {
+		/*
+		 * Oh, dear.  A previous attempt to write the journal
+		 * superblock failed.  This could happen because the
+		 * USB device was yanked out.  Or it could happen to
+		 * be a transient write error and maybe the block will
+		 * be remapped.  Nothing we can do but to retry the
+		 * write and hope for the best.
+		 */
+		printk(KERN_ERR "JBD2: previous I/O error detected "
+		       "for journal superblock update for %s.\n",
+		       journal->j_devname);
+		clear_buffer_write_io_error(bh);
+		set_buffer_uptodate(bh);
+	}
+	if (jbd2_journal_has_csum_v2or3(journal))
+		sb->s_checksum = jbd2_superblock_csum(journal, sb);
+	get_bh(bh);
+	bh->b_end_io = end_buffer_write_sync;
+	submit_bh(REQ_OP_WRITE | write_flags, bh);
+	wait_on_buffer(bh);
+	if (buffer_write_io_error(bh)) {
+		clear_buffer_write_io_error(bh);
+		set_buffer_uptodate(bh);
+		ret = -EIO;
+	}
+	if (ret) {
+		printk(KERN_ERR "JBD2: I/O error when updating journal superblock for %s.\n",
+				journal->j_devname);
+		if (!is_journal_aborted(journal))
+			jbd2_journal_abort(journal, ret);
+	}
+
+	return ret;
+}
+
+/**
+ * jbd2_journal_update_sb_log_tail() - Update log tail in journal sb on disk.
+ * @journal: The journal to update.
+ * @tail_tid: TID of the new transaction at the tail of the log
+ * @tail_block: The first block of the transaction at the tail of the log
+ * @write_flags: Flags for the journal sb write operation
+ *
+ * Update a journal's superblock information about log tail and write it to
+ * disk, waiting for the IO to complete.
+ */
+int jbd2_journal_update_sb_log_tail(journal_t *journal, tid_t tail_tid,
+				    unsigned long tail_block,
+				    blk_opf_t write_flags)
+{
+	journal_superblock_t *sb = journal->j_superblock;
+	int ret;
+
+	if (is_journal_aborted(journal))
+		return -EIO;
+	if (test_bit(JBD2_CHECKPOINT_IO_ERROR, &journal->j_atomic_flags)) {
+		jbd2_journal_abort(journal, -EIO);
+		return -EIO;
+	}
+
+	BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex));
+	jbd2_debug(1, "JBD2: updating superblock (start %lu, seq %u)\n",
+		  tail_block, tail_tid);
+
+	lock_buffer(journal->j_sb_buffer);
+	sb->s_sequence = cpu_to_be32(tail_tid);
+	sb->s_start    = cpu_to_be32(tail_block);
+
+	ret = jbd2_write_superblock(journal, write_flags);
+	if (ret)
+		goto out;
+
+	/* Log is no longer empty */
+	write_lock(&journal->j_state_lock);
+	WARN_ON(!sb->s_sequence);
+	journal->j_flags &= ~JBD2_FLUSHED;
+	write_unlock(&journal->j_state_lock);
+
+out:
+	return ret;
+}
+
+/**
+ * jbd2_mark_journal_empty() - Mark on disk journal as empty.
+ * @journal: The journal to update.
+ * @write_flags: Flags for the journal sb write operation
+ *
+ * Update a journal's dynamic superblock fields to show that journal is empty.
+ * Write updated superblock to disk waiting for IO to complete.
+ */
+static void jbd2_mark_journal_empty(journal_t *journal, blk_opf_t write_flags)
+{
+	journal_superblock_t *sb = journal->j_superblock;
+	bool had_fast_commit = false;
+
+	BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex));
+	lock_buffer(journal->j_sb_buffer);
+	if (sb->s_start == 0) {		/* Is it already empty? */
+		unlock_buffer(journal->j_sb_buffer);
+		return;
+	}
+
+	jbd2_debug(1, "JBD2: Marking journal as empty (seq %u)\n",
+		  journal->j_tail_sequence);
+
+	sb->s_sequence = cpu_to_be32(journal->j_tail_sequence);
+	sb->s_start    = cpu_to_be32(0);
+	if (jbd2_has_feature_fast_commit(journal)) {
+		/*
+		 * When journal is clean, no need to commit fast commit flag and
+		 * make file system incompatible with older kernels.
+		 */
+		jbd2_clear_feature_fast_commit(journal);
+		had_fast_commit = true;
+	}
+
+	jbd2_write_superblock(journal, write_flags);
+
+	if (had_fast_commit)
+		jbd2_set_feature_fast_commit(journal);
+
+	/* Log is no longer empty */
+	write_lock(&journal->j_state_lock);
+	journal->j_flags |= JBD2_FLUSHED;
+	write_unlock(&journal->j_state_lock);
+}
+
+/**
+ * __jbd2_journal_erase() - Discard or zeroout journal blocks (excluding superblock)
+ * @journal: The journal to erase.
+ * @flags: A discard/zeroout request is sent for each physically contigous
+ *	region of the journal. Either JBD2_JOURNAL_FLUSH_DISCARD or
+ *	JBD2_JOURNAL_FLUSH_ZEROOUT must be set to determine which operation
+ *	to perform.
+ *
+ * Note: JBD2_JOURNAL_FLUSH_ZEROOUT attempts to use hardware offload. Zeroes
+ * will be explicitly written if no hardware offload is available, see
+ * blkdev_issue_zeroout for more details.
+ */
+static int __jbd2_journal_erase(journal_t *journal, unsigned int flags)
+{
+	int err = 0;
+	unsigned long block, log_offset; /* logical */
+	unsigned long long phys_block, block_start, block_stop; /* physical */
+	loff_t byte_start, byte_stop, byte_count;
+
+	/* flags must be set to either discard or zeroout */
+	if ((flags & ~JBD2_JOURNAL_FLUSH_VALID) || !flags ||
+			((flags & JBD2_JOURNAL_FLUSH_DISCARD) &&
+			(flags & JBD2_JOURNAL_FLUSH_ZEROOUT)))
+		return -EINVAL;
+
+	if ((flags & JBD2_JOURNAL_FLUSH_DISCARD) &&
+	    !bdev_max_discard_sectors(journal->j_dev))
+		return -EOPNOTSUPP;
+
+	/*
+	 * lookup block mapping and issue discard/zeroout for each
+	 * contiguous region
+	 */
+	log_offset = be32_to_cpu(journal->j_superblock->s_first);
+	block_start =  ~0ULL;
+	for (block = log_offset; block < journal->j_total_len; block++) {
+		err = jbd2_journal_bmap(journal, block, &phys_block);
+		if (err) {
+			pr_err("JBD2: bad block at offset %lu", block);
+			return err;
+		}
+
+		if (block_start == ~0ULL) {
+			block_start = phys_block;
+			block_stop = block_start - 1;
+		}
+
+		/*
+		 * last block not contiguous with current block,
+		 * process last contiguous region and return to this block on
+		 * next loop
+		 */
+		if (phys_block != block_stop + 1) {
+			block--;
+		} else {
+			block_stop++;
+			/*
+			 * if this isn't the last block of journal,
+			 * no need to process now because next block may also
+			 * be part of this contiguous region
+			 */
+			if (block != journal->j_total_len - 1)
+				continue;
+		}
+
+		/*
+		 * end of contiguous region or this is last block of journal,
+		 * take care of the region
+		 */
+		byte_start = block_start * journal->j_blocksize;
+		byte_stop = block_stop * journal->j_blocksize;
+		byte_count = (block_stop - block_start + 1) *
+				journal->j_blocksize;
+
+		truncate_inode_pages_range(journal->j_dev->bd_inode->i_mapping,
+				byte_start, byte_stop);
+
+		if (flags & JBD2_JOURNAL_FLUSH_DISCARD) {
+			err = blkdev_issue_discard(journal->j_dev,
+					byte_start >> SECTOR_SHIFT,
+					byte_count >> SECTOR_SHIFT,
+					GFP_NOFS);
+		} else if (flags & JBD2_JOURNAL_FLUSH_ZEROOUT) {
+			err = blkdev_issue_zeroout(journal->j_dev,
+					byte_start >> SECTOR_SHIFT,
+					byte_count >> SECTOR_SHIFT,
+					GFP_NOFS, 0);
+		}
+
+		if (unlikely(err != 0)) {
+			pr_err("JBD2: (error %d) unable to wipe journal at physical blocks %llu - %llu",
+					err, block_start, block_stop);
+			return err;
+		}
+
+		/* reset start and stop after processing a region */
+		block_start = ~0ULL;
+	}
+
+	return blkdev_issue_flush(journal->j_dev);
+}
+
+/**
+ * jbd2_journal_update_sb_errno() - Update error in the journal.
+ * @journal: The journal to update.
+ *
+ * Update a journal's errno.  Write updated superblock to disk waiting for IO
+ * to complete.
+ */
+void jbd2_journal_update_sb_errno(journal_t *journal)
+{
+	journal_superblock_t *sb = journal->j_superblock;
+	int errcode;
+
+	lock_buffer(journal->j_sb_buffer);
+	errcode = journal->j_errno;
+	if (errcode == -ESHUTDOWN)
+		errcode = 0;
+	jbd2_debug(1, "JBD2: updating superblock error (errno %d)\n", errcode);
+	sb->s_errno    = cpu_to_be32(errcode);
+
+	jbd2_write_superblock(journal, REQ_FUA);
+}
+EXPORT_SYMBOL(jbd2_journal_update_sb_errno);
+
+static int journal_revoke_records_per_block(journal_t *journal)
+{
+	int record_size;
+	int space = journal->j_blocksize - sizeof(jbd2_journal_revoke_header_t);
+
+	if (jbd2_has_feature_64bit(journal))
+		record_size = 8;
+	else
+		record_size = 4;
+
+	if (jbd2_journal_has_csum_v2or3(journal))
+		space -= sizeof(struct jbd2_journal_block_tail);
+	return space / record_size;
+}
+
+/*
+ * Read the superblock for a given journal, performing initial
+ * validation of the format.
+ */
+static int journal_get_superblock(journal_t *journal)
+{
+	struct buffer_head *bh;
+	journal_superblock_t *sb;
+	int err;
+
+	bh = journal->j_sb_buffer;
+
+	J_ASSERT(bh != NULL);
+	err = bh_read(bh, 0);
+	if (err < 0) {
+		printk(KERN_ERR
+			"JBD2: IO error reading journal superblock\n");
+		goto out;
+	}
+
+	if (buffer_verified(bh))
+		return 0;
+
+	sb = journal->j_superblock;
+
+	err = -EINVAL;
+
+	if (sb->s_header.h_magic != cpu_to_be32(JBD2_MAGIC_NUMBER) ||
+	    sb->s_blocksize != cpu_to_be32(journal->j_blocksize)) {
+		printk(KERN_WARNING "JBD2: no valid journal superblock found\n");
+		goto out;
+	}
+
+	switch(be32_to_cpu(sb->s_header.h_blocktype)) {
+	case JBD2_SUPERBLOCK_V1:
+		journal->j_format_version = 1;
+		break;
+	case JBD2_SUPERBLOCK_V2:
+		journal->j_format_version = 2;
+		break;
+	default:
+		printk(KERN_WARNING "JBD2: unrecognised superblock format ID\n");
+		goto out;
+	}
+
+	if (be32_to_cpu(sb->s_maxlen) < journal->j_total_len)
+		journal->j_total_len = be32_to_cpu(sb->s_maxlen);
+	else if (be32_to_cpu(sb->s_maxlen) > journal->j_total_len) {
+		printk(KERN_WARNING "JBD2: journal file too short\n");
+		goto out;
+	}
+
+	if (be32_to_cpu(sb->s_first) == 0 ||
+	    be32_to_cpu(sb->s_first) >= journal->j_total_len) {
+		printk(KERN_WARNING
+			"JBD2: Invalid start block of journal: %u\n",
+			be32_to_cpu(sb->s_first));
+		goto out;
+	}
+
+	if (jbd2_has_feature_csum2(journal) &&
+	    jbd2_has_feature_csum3(journal)) {
+		/* Can't have checksum v2 and v3 at the same time! */
+		printk(KERN_ERR "JBD2: Can't enable checksumming v2 and v3 "
+		       "at the same time!\n");
+		goto out;
+	}
+
+	if (jbd2_journal_has_csum_v2or3_feature(journal) &&
+	    jbd2_has_feature_checksum(journal)) {
+		/* Can't have checksum v1 and v2 on at the same time! */
+		printk(KERN_ERR "JBD2: Can't enable checksumming v1 and v2/3 "
+		       "at the same time!\n");
+		goto out;
+	}
+
+	if (!jbd2_verify_csum_type(journal, sb)) {
+		printk(KERN_ERR "JBD2: Unknown checksum type\n");
+		goto out;
+	}
+
+	/* Load the checksum driver */
+	if (jbd2_journal_has_csum_v2or3_feature(journal)) {
+		journal->j_chksum_driver = crypto_alloc_shash("crc32c", 0, 0);
+		if (IS_ERR(journal->j_chksum_driver)) {
+			printk(KERN_ERR "JBD2: Cannot load crc32c driver.\n");
+			err = PTR_ERR(journal->j_chksum_driver);
+			journal->j_chksum_driver = NULL;
+			goto out;
+		}
+	}
+
+	if (jbd2_journal_has_csum_v2or3(journal)) {
+		/* Check superblock checksum */
+		if (sb->s_checksum != jbd2_superblock_csum(journal, sb)) {
+			printk(KERN_ERR "JBD2: journal checksum error\n");
+			err = -EFSBADCRC;
+			goto out;
+		}
+
+		/* Precompute checksum seed for all metadata */
+		journal->j_csum_seed = jbd2_chksum(journal, ~0, sb->s_uuid,
+						   sizeof(sb->s_uuid));
+	}
+
+	journal->j_revoke_records_per_block =
+				journal_revoke_records_per_block(journal);
+	set_buffer_verified(bh);
+
+	return 0;
+
+out:
+	journal_fail_superblock(journal);
+	return err;
+}
+
+/*
+ * Load the on-disk journal superblock and read the key fields into the
+ * journal_t.
+ */
+
+static int load_superblock(journal_t *journal)
+{
+	int err;
+	journal_superblock_t *sb;
+	int num_fc_blocks;
+
+	err = journal_get_superblock(journal);
+	if (err)
+		return err;
+
+	sb = journal->j_superblock;
+
+	journal->j_tail_sequence = be32_to_cpu(sb->s_sequence);
+	journal->j_tail = be32_to_cpu(sb->s_start);
+	journal->j_first = be32_to_cpu(sb->s_first);
+	journal->j_errno = be32_to_cpu(sb->s_errno);
+	journal->j_last = be32_to_cpu(sb->s_maxlen);
+
+	if (jbd2_has_feature_fast_commit(journal)) {
+		journal->j_fc_last = be32_to_cpu(sb->s_maxlen);
+		num_fc_blocks = jbd2_journal_get_num_fc_blks(sb);
+		if (journal->j_last - num_fc_blocks >= JBD2_MIN_JOURNAL_BLOCKS)
+			journal->j_last = journal->j_fc_last - num_fc_blocks;
+		journal->j_fc_first = journal->j_last + 1;
+		journal->j_fc_off = 0;
+	}
+
+	return 0;
+}
+
+
+/**
+ * jbd2_journal_load() - Read journal from disk.
+ * @journal: Journal to act on.
+ *
+ * Given a journal_t structure which tells us which disk blocks contain
+ * a journal, read the journal from disk to initialise the in-memory
+ * structures.
+ */
+int jbd2_journal_load(journal_t *journal)
+{
+	int err;
+	journal_superblock_t *sb;
+
+	err = load_superblock(journal);
+	if (err)
+		return err;
+
+	sb = journal->j_superblock;
+	/* If this is a V2 superblock, then we have to check the
+	 * features flags on it. */
+
+	if (journal->j_format_version >= 2) {
+		if ((sb->s_feature_ro_compat &
+		     ~cpu_to_be32(JBD2_KNOWN_ROCOMPAT_FEATURES)) ||
+		    (sb->s_feature_incompat &
+		     ~cpu_to_be32(JBD2_KNOWN_INCOMPAT_FEATURES))) {
+			printk(KERN_WARNING
+				"JBD2: Unrecognised features on journal\n");
+			return -EINVAL;
+		}
+	}
+
+	/*
+	 * Create a slab for this blocksize
+	 */
+	err = jbd2_journal_create_slab(be32_to_cpu(sb->s_blocksize));
+	if (err)
+		return err;
+
+	/* Let the recovery code check whether it needs to recover any
+	 * data from the journal. */
+	if (jbd2_journal_recover(journal))
+		goto recovery_error;
+
+	if (journal->j_failed_commit) {
+		printk(KERN_ERR "JBD2: journal transaction %u on %s "
+		       "is corrupt.\n", journal->j_failed_commit,
+		       journal->j_devname);
+		return -EFSCORRUPTED;
+	}
+	/*
+	 * clear JBD2_ABORT flag initialized in journal_init_common
+	 * here to update log tail information with the newest seq.
+	 */
+	journal->j_flags &= ~JBD2_ABORT;
+
+	/* OK, we've finished with the dynamic journal bits:
+	 * reinitialise the dynamic contents of the superblock in memory
+	 * and reset them on disk. */
+	if (journal_reset(journal))
+		goto recovery_error;
+
+	journal->j_flags |= JBD2_LOADED;
+	return 0;
+
+recovery_error:
+	printk(KERN_WARNING "JBD2: recovery failed\n");
+	return -EIO;
+}
+
+/**
+ * jbd2_journal_destroy() - Release a journal_t structure.
+ * @journal: Journal to act on.
+ *
+ * Release a journal_t structure once it is no longer in use by the
+ * journaled object.
+ * Return <0 if we couldn't clean up the journal.
+ */
+int jbd2_journal_destroy(journal_t *journal)
+{
+	int err = 0;
+
+	/* Wait for the commit thread to wake up and die. */
+	journal_kill_thread(journal);
+
+	/* Force a final log commit */
+	if (journal->j_running_transaction)
+		jbd2_journal_commit_transaction(journal);
+
+	/* Force any old transactions to disk */
+
+	/* Totally anal locking here... */
+	spin_lock(&journal->j_list_lock);
+	while (journal->j_checkpoint_transactions != NULL) {
+		spin_unlock(&journal->j_list_lock);
+		mutex_lock_io(&journal->j_checkpoint_mutex);
+		err = jbd2_log_do_checkpoint(journal);
+		mutex_unlock(&journal->j_checkpoint_mutex);
+		/*
+		 * If checkpointing failed, just free the buffers to avoid
+		 * looping forever
+		 */
+		if (err) {
+			jbd2_journal_destroy_checkpoint(journal);
+			spin_lock(&journal->j_list_lock);
+			break;
+		}
+		spin_lock(&journal->j_list_lock);
+	}
+
+	J_ASSERT(journal->j_running_transaction == NULL);
+	J_ASSERT(journal->j_committing_transaction == NULL);
+	J_ASSERT(journal->j_checkpoint_transactions == NULL);
+	spin_unlock(&journal->j_list_lock);
+
+	/*
+	 * OK, all checkpoint transactions have been checked, now check the
+	 * write out io error flag and abort the journal if some buffer failed
+	 * to write back to the original location, otherwise the filesystem
+	 * may become inconsistent.
+	 */
+	if (!is_journal_aborted(journal) &&
+	    test_bit(JBD2_CHECKPOINT_IO_ERROR, &journal->j_atomic_flags))
+		jbd2_journal_abort(journal, -EIO);
+
+	if (journal->j_sb_buffer) {
+		if (!is_journal_aborted(journal)) {
+			mutex_lock_io(&journal->j_checkpoint_mutex);
+
+			write_lock(&journal->j_state_lock);
+			journal->j_tail_sequence =
+				++journal->j_transaction_sequence;
+			write_unlock(&journal->j_state_lock);
+
+			jbd2_mark_journal_empty(journal, REQ_PREFLUSH | REQ_FUA);
+			mutex_unlock(&journal->j_checkpoint_mutex);
+		} else
+			err = -EIO;
+		brelse(journal->j_sb_buffer);
+	}
+
+	if (journal->j_shrinker.flags & SHRINKER_REGISTERED) {
+		percpu_counter_destroy(&journal->j_checkpoint_jh_count);
+		unregister_shrinker(&journal->j_shrinker);
+	}
+	if (journal->j_proc_entry)
+		jbd2_stats_proc_exit(journal);
+	iput(journal->j_inode);
+	if (journal->j_revoke)
+		jbd2_journal_destroy_revoke(journal);
+	if (journal->j_chksum_driver)
+		crypto_free_shash(journal->j_chksum_driver);
+	kfree(journal->j_fc_wbuf);
+	kfree(journal->j_wbuf);
+	kfree(journal);
+
+	return err;
+}
+
+
+/**
+ * jbd2_journal_check_used_features() - Check if features specified are used.
+ * @journal: Journal to check.
+ * @compat: bitmask of compatible features
+ * @ro: bitmask of features that force read-only mount
+ * @incompat: bitmask of incompatible features
+ *
+ * Check whether the journal uses all of a given set of
+ * features.  Return true (non-zero) if it does.
+ **/
+
+int jbd2_journal_check_used_features(journal_t *journal, unsigned long compat,
+				 unsigned long ro, unsigned long incompat)
+{
+	journal_superblock_t *sb;
+
+	if (!compat && !ro && !incompat)
+		return 1;
+	/* Load journal superblock if it is not loaded yet. */
+	if (journal->j_format_version == 0 &&
+	    journal_get_superblock(journal) != 0)
+		return 0;
+	if (journal->j_format_version == 1)
+		return 0;
+
+	sb = journal->j_superblock;
+
+	if (((be32_to_cpu(sb->s_feature_compat) & compat) == compat) &&
+	    ((be32_to_cpu(sb->s_feature_ro_compat) & ro) == ro) &&
+	    ((be32_to_cpu(sb->s_feature_incompat) & incompat) == incompat))
+		return 1;
+
+	return 0;
+}
+
+/**
+ * jbd2_journal_check_available_features() - Check feature set in journalling layer
+ * @journal: Journal to check.
+ * @compat: bitmask of compatible features
+ * @ro: bitmask of features that force read-only mount
+ * @incompat: bitmask of incompatible features
+ *
+ * Check whether the journaling code supports the use of
+ * all of a given set of features on this journal.  Return true
+ * (non-zero) if it can. */
+
+int jbd2_journal_check_available_features(journal_t *journal, unsigned long compat,
+				      unsigned long ro, unsigned long incompat)
+{
+	if (!compat && !ro && !incompat)
+		return 1;
+
+	/* We can support any known requested features iff the
+	 * superblock is in version 2.  Otherwise we fail to support any
+	 * extended sb features. */
+
+	if (journal->j_format_version != 2)
+		return 0;
+
+	if ((compat   & JBD2_KNOWN_COMPAT_FEATURES) == compat &&
+	    (ro       & JBD2_KNOWN_ROCOMPAT_FEATURES) == ro &&
+	    (incompat & JBD2_KNOWN_INCOMPAT_FEATURES) == incompat)
+		return 1;
+
+	return 0;
+}
+
+static int
+jbd2_journal_initialize_fast_commit(journal_t *journal)
+{
+	journal_superblock_t *sb = journal->j_superblock;
+	unsigned long long num_fc_blks;
+
+	num_fc_blks = jbd2_journal_get_num_fc_blks(sb);
+	if (journal->j_last - num_fc_blks < JBD2_MIN_JOURNAL_BLOCKS)
+		return -ENOSPC;
+
+	/* Are we called twice? */
+	WARN_ON(journal->j_fc_wbuf != NULL);
+	journal->j_fc_wbuf = kmalloc_array(num_fc_blks,
+				sizeof(struct buffer_head *), GFP_KERNEL);
+	if (!journal->j_fc_wbuf)
+		return -ENOMEM;
+
+	journal->j_fc_wbufsize = num_fc_blks;
+	journal->j_fc_last = journal->j_last;
+	journal->j_last = journal->j_fc_last - num_fc_blks;
+	journal->j_fc_first = journal->j_last + 1;
+	journal->j_fc_off = 0;
+	journal->j_free = journal->j_last - journal->j_first;
+	journal->j_max_transaction_buffers =
+		jbd2_journal_get_max_txn_bufs(journal);
+
+	return 0;
+}
+
+/**
+ * jbd2_journal_set_features() - Mark a given journal feature in the superblock
+ * @journal: Journal to act on.
+ * @compat: bitmask of compatible features
+ * @ro: bitmask of features that force read-only mount
+ * @incompat: bitmask of incompatible features
+ *
+ * Mark a given journal feature as present on the
+ * superblock.  Returns true if the requested features could be set.
+ *
+ */
+
+int jbd2_journal_set_features(journal_t *journal, unsigned long compat,
+			  unsigned long ro, unsigned long incompat)
+{
+#define INCOMPAT_FEATURE_ON(f) \
+		((incompat & (f)) && !(sb->s_feature_incompat & cpu_to_be32(f)))
+#define COMPAT_FEATURE_ON(f) \
+		((compat & (f)) && !(sb->s_feature_compat & cpu_to_be32(f)))
+	journal_superblock_t *sb;
+
+	if (jbd2_journal_check_used_features(journal, compat, ro, incompat))
+		return 1;
+
+	if (!jbd2_journal_check_available_features(journal, compat, ro, incompat))
+		return 0;
+
+	/* If enabling v2 checksums, turn on v3 instead */
+	if (incompat & JBD2_FEATURE_INCOMPAT_CSUM_V2) {
+		incompat &= ~JBD2_FEATURE_INCOMPAT_CSUM_V2;
+		incompat |= JBD2_FEATURE_INCOMPAT_CSUM_V3;
+	}
+
+	/* Asking for checksumming v3 and v1?  Only give them v3. */
+	if (incompat & JBD2_FEATURE_INCOMPAT_CSUM_V3 &&
+	    compat & JBD2_FEATURE_COMPAT_CHECKSUM)
+		compat &= ~JBD2_FEATURE_COMPAT_CHECKSUM;
+
+	jbd2_debug(1, "Setting new features 0x%lx/0x%lx/0x%lx\n",
+		  compat, ro, incompat);
+
+	sb = journal->j_superblock;
+
+	if (incompat & JBD2_FEATURE_INCOMPAT_FAST_COMMIT) {
+		if (jbd2_journal_initialize_fast_commit(journal)) {
+			pr_err("JBD2: Cannot enable fast commits.\n");
+			return 0;
+		}
+	}
+
+	/* Load the checksum driver if necessary */
+	if ((journal->j_chksum_driver == NULL) &&
+	    INCOMPAT_FEATURE_ON(JBD2_FEATURE_INCOMPAT_CSUM_V3)) {
+		journal->j_chksum_driver = crypto_alloc_shash("crc32c", 0, 0);
+		if (IS_ERR(journal->j_chksum_driver)) {
+			printk(KERN_ERR "JBD2: Cannot load crc32c driver.\n");
+			journal->j_chksum_driver = NULL;
+			return 0;
+		}
+		/* Precompute checksum seed for all metadata */
+		journal->j_csum_seed = jbd2_chksum(journal, ~0, sb->s_uuid,
+						   sizeof(sb->s_uuid));
+	}
+
+	lock_buffer(journal->j_sb_buffer);
+
+	/* If enabling v3 checksums, update superblock */
+	if (INCOMPAT_FEATURE_ON(JBD2_FEATURE_INCOMPAT_CSUM_V3)) {
+		sb->s_checksum_type = JBD2_CRC32C_CHKSUM;
+		sb->s_feature_compat &=
+			~cpu_to_be32(JBD2_FEATURE_COMPAT_CHECKSUM);
+	}
+
+	/* If enabling v1 checksums, downgrade superblock */
+	if (COMPAT_FEATURE_ON(JBD2_FEATURE_COMPAT_CHECKSUM))
+		sb->s_feature_incompat &=
+			~cpu_to_be32(JBD2_FEATURE_INCOMPAT_CSUM_V2 |
+				     JBD2_FEATURE_INCOMPAT_CSUM_V3);
+
+	sb->s_feature_compat    |= cpu_to_be32(compat);
+	sb->s_feature_ro_compat |= cpu_to_be32(ro);
+	sb->s_feature_incompat  |= cpu_to_be32(incompat);
+	unlock_buffer(journal->j_sb_buffer);
+	journal->j_revoke_records_per_block =
+				journal_revoke_records_per_block(journal);
+
+	return 1;
+#undef COMPAT_FEATURE_ON
+#undef INCOMPAT_FEATURE_ON
+}
+
+/*
+ * jbd2_journal_clear_features() - Clear a given journal feature in the
+ * 				    superblock
+ * @journal: Journal to act on.
+ * @compat: bitmask of compatible features
+ * @ro: bitmask of features that force read-only mount
+ * @incompat: bitmask of incompatible features
+ *
+ * Clear a given journal feature as present on the
+ * superblock.
+ */
+void jbd2_journal_clear_features(journal_t *journal, unsigned long compat,
+				unsigned long ro, unsigned long incompat)
+{
+	journal_superblock_t *sb;
+
+	jbd2_debug(1, "Clear features 0x%lx/0x%lx/0x%lx\n",
+		  compat, ro, incompat);
+
+	sb = journal->j_superblock;
+
+	sb->s_feature_compat    &= ~cpu_to_be32(compat);
+	sb->s_feature_ro_compat &= ~cpu_to_be32(ro);
+	sb->s_feature_incompat  &= ~cpu_to_be32(incompat);
+	journal->j_revoke_records_per_block =
+				journal_revoke_records_per_block(journal);
+}
+EXPORT_SYMBOL(jbd2_journal_clear_features);
+
+/**
+ * jbd2_journal_flush() - Flush journal
+ * @journal: Journal to act on.
+ * @flags: optional operation on the journal blocks after the flush (see below)
+ *
+ * Flush all data for a given journal to disk and empty the journal.
+ * Filesystems can use this when remounting readonly to ensure that
+ * recovery does not need to happen on remount. Optionally, a discard or zeroout
+ * can be issued on the journal blocks after flushing.
+ *
+ * flags:
+ *	JBD2_JOURNAL_FLUSH_DISCARD: issues discards for the journal blocks
+ *	JBD2_JOURNAL_FLUSH_ZEROOUT: issues zeroouts for the journal blocks
+ */
+int jbd2_journal_flush(journal_t *journal, unsigned int flags)
+{
+	int err = 0;
+	transaction_t *transaction = NULL;
+
+	write_lock(&journal->j_state_lock);
+
+	/* Force everything buffered to the log... */
+	if (journal->j_running_transaction) {
+		transaction = journal->j_running_transaction;
+		__jbd2_log_start_commit(journal, transaction->t_tid);
+	} else if (journal->j_committing_transaction)
+		transaction = journal->j_committing_transaction;
+
+	/* Wait for the log commit to complete... */
+	if (transaction) {
+		tid_t tid = transaction->t_tid;
+
+		write_unlock(&journal->j_state_lock);
+		jbd2_log_wait_commit(journal, tid);
+	} else {
+		write_unlock(&journal->j_state_lock);
+	}
+
+	/* ...and flush everything in the log out to disk. */
+	spin_lock(&journal->j_list_lock);
+	while (!err && journal->j_checkpoint_transactions != NULL) {
+		spin_unlock(&journal->j_list_lock);
+		mutex_lock_io(&journal->j_checkpoint_mutex);
+		err = jbd2_log_do_checkpoint(journal);
+		mutex_unlock(&journal->j_checkpoint_mutex);
+		spin_lock(&journal->j_list_lock);
+	}
+	spin_unlock(&journal->j_list_lock);
+
+	if (is_journal_aborted(journal))
+		return -EIO;
+
+	mutex_lock_io(&journal->j_checkpoint_mutex);
+	if (!err) {
+		err = jbd2_cleanup_journal_tail(journal);
+		if (err < 0) {
+			mutex_unlock(&journal->j_checkpoint_mutex);
+			goto out;
+		}
+		err = 0;
+	}
+
+	/* Finally, mark the journal as really needing no recovery.
+	 * This sets s_start==0 in the underlying superblock, which is
+	 * the magic code for a fully-recovered superblock.  Any future
+	 * commits of data to the journal will restore the current
+	 * s_start value. */
+	jbd2_mark_journal_empty(journal, REQ_FUA);
+
+	if (flags)
+		err = __jbd2_journal_erase(journal, flags);
+
+	mutex_unlock(&journal->j_checkpoint_mutex);
+	write_lock(&journal->j_state_lock);
+	J_ASSERT(!journal->j_running_transaction);
+	J_ASSERT(!journal->j_committing_transaction);
+	J_ASSERT(!journal->j_checkpoint_transactions);
+	J_ASSERT(journal->j_head == journal->j_tail);
+	J_ASSERT(journal->j_tail_sequence == journal->j_transaction_sequence);
+	write_unlock(&journal->j_state_lock);
+out:
+	return err;
+}
+
+/**
+ * jbd2_journal_wipe() - Wipe journal contents
+ * @journal: Journal to act on.
+ * @write: flag (see below)
+ *
+ * Wipe out all of the contents of a journal, safely.  This will produce
+ * a warning if the journal contains any valid recovery information.
+ * Must be called between journal_init_*() and jbd2_journal_load().
+ *
+ * If 'write' is non-zero, then we wipe out the journal on disk; otherwise
+ * we merely suppress recovery.
+ */
+
+int jbd2_journal_wipe(journal_t *journal, int write)
+{
+	int err = 0;
+
+	J_ASSERT (!(journal->j_flags & JBD2_LOADED));
+
+	err = load_superblock(journal);
+	if (err)
+		return err;
+
+	if (!journal->j_tail)
+		goto no_recovery;
+
+	printk(KERN_WARNING "JBD2: %s recovery information on journal\n",
+		write ? "Clearing" : "Ignoring");
+
+	err = jbd2_journal_skip_recovery(journal);
+	if (write) {
+		/* Lock to make assertions happy... */
+		mutex_lock_io(&journal->j_checkpoint_mutex);
+		jbd2_mark_journal_empty(journal, REQ_FUA);
+		mutex_unlock(&journal->j_checkpoint_mutex);
+	}
+
+ no_recovery:
+	return err;
+}
+
+/**
+ * jbd2_journal_abort () - Shutdown the journal immediately.
+ * @journal: the journal to shutdown.
+ * @errno:   an error number to record in the journal indicating
+ *           the reason for the shutdown.
+ *
+ * Perform a complete, immediate shutdown of the ENTIRE
+ * journal (not of a single transaction).  This operation cannot be
+ * undone without closing and reopening the journal.
+ *
+ * The jbd2_journal_abort function is intended to support higher level error
+ * recovery mechanisms such as the ext2/ext3 remount-readonly error
+ * mode.
+ *
+ * Journal abort has very specific semantics.  Any existing dirty,
+ * unjournaled buffers in the main filesystem will still be written to
+ * disk by bdflush, but the journaling mechanism will be suspended
+ * immediately and no further transaction commits will be honoured.
+ *
+ * Any dirty, journaled buffers will be written back to disk without
+ * hitting the journal.  Atomicity cannot be guaranteed on an aborted
+ * filesystem, but we _do_ attempt to leave as much data as possible
+ * behind for fsck to use for cleanup.
+ *
+ * Any attempt to get a new transaction handle on a journal which is in
+ * ABORT state will just result in an -EROFS error return.  A
+ * jbd2_journal_stop on an existing handle will return -EIO if we have
+ * entered abort state during the update.
+ *
+ * Recursive transactions are not disturbed by journal abort until the
+ * final jbd2_journal_stop, which will receive the -EIO error.
+ *
+ * Finally, the jbd2_journal_abort call allows the caller to supply an errno
+ * which will be recorded (if possible) in the journal superblock.  This
+ * allows a client to record failure conditions in the middle of a
+ * transaction without having to complete the transaction to record the
+ * failure to disk.  ext3_error, for example, now uses this
+ * functionality.
+ *
+ */
+
+void jbd2_journal_abort(journal_t *journal, int errno)
+{
+	transaction_t *transaction;
+
+	/*
+	 * Lock the aborting procedure until everything is done, this avoid
+	 * races between filesystem's error handling flow (e.g. ext4_abort()),
+	 * ensure panic after the error info is written into journal's
+	 * superblock.
+	 */
+	mutex_lock(&journal->j_abort_mutex);
+	/*
+	 * ESHUTDOWN always takes precedence because a file system check
+	 * caused by any other journal abort error is not required after
+	 * a shutdown triggered.
+	 */
+	write_lock(&journal->j_state_lock);
+	if (journal->j_flags & JBD2_ABORT) {
+		int old_errno = journal->j_errno;
+
+		write_unlock(&journal->j_state_lock);
+		if (old_errno != -ESHUTDOWN && errno == -ESHUTDOWN) {
+			journal->j_errno = errno;
+			jbd2_journal_update_sb_errno(journal);
+		}
+		mutex_unlock(&journal->j_abort_mutex);
+		return;
+	}
+
+	/*
+	 * Mark the abort as occurred and start current running transaction
+	 * to release all journaled buffer.
+	 */
+	pr_err("Aborting journal on device %s.\n", journal->j_devname);
+
+	journal->j_flags |= JBD2_ABORT;
+	journal->j_errno = errno;
+	transaction = journal->j_running_transaction;
+	if (transaction)
+		__jbd2_log_start_commit(journal, transaction->t_tid);
+	write_unlock(&journal->j_state_lock);
+
+	/*
+	 * Record errno to the journal super block, so that fsck and jbd2
+	 * layer could realise that a filesystem check is needed.
+	 */
+	jbd2_journal_update_sb_errno(journal);
+	mutex_unlock(&journal->j_abort_mutex);
+}
+
+/**
+ * jbd2_journal_errno() - returns the journal's error state.
+ * @journal: journal to examine.
+ *
+ * This is the errno number set with jbd2_journal_abort(), the last
+ * time the journal was mounted - if the journal was stopped
+ * without calling abort this will be 0.
+ *
+ * If the journal has been aborted on this mount time -EROFS will
+ * be returned.
+ */
+int jbd2_journal_errno(journal_t *journal)
+{
+	int err;
+
+	read_lock(&journal->j_state_lock);
+	if (journal->j_flags & JBD2_ABORT)
+		err = -EROFS;
+	else
+		err = journal->j_errno;
+	read_unlock(&journal->j_state_lock);
+	return err;
+}
+
+/**
+ * jbd2_journal_clear_err() - clears the journal's error state
+ * @journal: journal to act on.
+ *
+ * An error must be cleared or acked to take a FS out of readonly
+ * mode.
+ */
+int jbd2_journal_clear_err(journal_t *journal)
+{
+	int err = 0;
+
+	write_lock(&journal->j_state_lock);
+	if (journal->j_flags & JBD2_ABORT)
+		err = -EROFS;
+	else
+		journal->j_errno = 0;
+	write_unlock(&journal->j_state_lock);
+	return err;
+}
+
+/**
+ * jbd2_journal_ack_err() - Ack journal err.
+ * @journal: journal to act on.
+ *
+ * An error must be cleared or acked to take a FS out of readonly
+ * mode.
+ */
+void jbd2_journal_ack_err(journal_t *journal)
+{
+	write_lock(&journal->j_state_lock);
+	if (journal->j_errno)
+		journal->j_flags |= JBD2_ACK_ERR;
+	write_unlock(&journal->j_state_lock);
+}
+
+int jbd2_journal_blocks_per_page(struct inode *inode)
+{
+	return 1 << (PAGE_SHIFT - inode->i_sb->s_blocksize_bits);
+}
+
+/*
+ * helper functions to deal with 32 or 64bit block numbers.
+ */
+size_t journal_tag_bytes(journal_t *journal)
+{
+	size_t sz;
+
+	if (jbd2_has_feature_csum3(journal))
+		return sizeof(journal_block_tag3_t);
+
+	sz = sizeof(journal_block_tag_t);
+
+	if (jbd2_has_feature_csum2(journal))
+		sz += sizeof(__u16);
+
+	if (jbd2_has_feature_64bit(journal))
+		return sz;
+	else
+		return sz - sizeof(__u32);
+}
+
+/*
+ * JBD memory management
+ *
+ * These functions are used to allocate block-sized chunks of memory
+ * used for making copies of buffer_head data.  Very often it will be
+ * page-sized chunks of data, but sometimes it will be in
+ * sub-page-size chunks.  (For example, 16k pages on Power systems
+ * with a 4k block file system.)  For blocks smaller than a page, we
+ * use a SLAB allocator.  There are slab caches for each block size,
+ * which are allocated at mount time, if necessary, and we only free
+ * (all of) the slab caches when/if the jbd2 module is unloaded.  For
+ * this reason we don't need to a mutex to protect access to
+ * jbd2_slab[] allocating or releasing memory; only in
+ * jbd2_journal_create_slab().
+ */
+#define JBD2_MAX_SLABS 8
+static struct kmem_cache *jbd2_slab[JBD2_MAX_SLABS];
+
+static const char *jbd2_slab_names[JBD2_MAX_SLABS] = {
+	"jbd2_1k", "jbd2_2k", "jbd2_4k", "jbd2_8k",
+	"jbd2_16k", "jbd2_32k", "jbd2_64k", "jbd2_128k"
+};
+
+
+static void jbd2_journal_destroy_slabs(void)
+{
+	int i;
+
+	for (i = 0; i < JBD2_MAX_SLABS; i++) {
+		kmem_cache_destroy(jbd2_slab[i]);
+		jbd2_slab[i] = NULL;
+	}
+}
+
+static int jbd2_journal_create_slab(size_t size)
+{
+	static DEFINE_MUTEX(jbd2_slab_create_mutex);
+	int i = order_base_2(size) - 10;
+	size_t slab_size;
+
+	if (size == PAGE_SIZE)
+		return 0;
+
+	if (i >= JBD2_MAX_SLABS)
+		return -EINVAL;
+
+	if (unlikely(i < 0))
+		i = 0;
+	mutex_lock(&jbd2_slab_create_mutex);
+	if (jbd2_slab[i]) {
+		mutex_unlock(&jbd2_slab_create_mutex);
+		return 0;	/* Already created */
+	}
+
+	slab_size = 1 << (i+10);
+	jbd2_slab[i] = kmem_cache_create(jbd2_slab_names[i], slab_size,
+					 slab_size, 0, NULL);
+	mutex_unlock(&jbd2_slab_create_mutex);
+	if (!jbd2_slab[i]) {
+		printk(KERN_EMERG "JBD2: no memory for jbd2_slab cache\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static struct kmem_cache *get_slab(size_t size)
+{
+	int i = order_base_2(size) - 10;
+
+	BUG_ON(i >= JBD2_MAX_SLABS);
+	if (unlikely(i < 0))
+		i = 0;
+	BUG_ON(jbd2_slab[i] == NULL);
+	return jbd2_slab[i];
+}
+
+void *jbd2_alloc(size_t size, gfp_t flags)
+{
+	void *ptr;
+
+	BUG_ON(size & (size-1)); /* Must be a power of 2 */
+
+	if (size < PAGE_SIZE)
+		ptr = kmem_cache_alloc(get_slab(size), flags);
+	else
+		ptr = (void *)__get_free_pages(flags, get_order(size));
+
+	/* Check alignment; SLUB has gotten this wrong in the past,
+	 * and this can lead to user data corruption! */
+	BUG_ON(((unsigned long) ptr) & (size-1));
+
+	return ptr;
+}
+
+void jbd2_free(void *ptr, size_t size)
+{
+	if (size < PAGE_SIZE)
+		kmem_cache_free(get_slab(size), ptr);
+	else
+		free_pages((unsigned long)ptr, get_order(size));
+};
+
+/*
+ * Journal_head storage management
+ */
+static struct kmem_cache *jbd2_journal_head_cache;
+#ifdef CONFIG_JBD2_DEBUG
+static atomic_t nr_journal_heads = ATOMIC_INIT(0);
+#endif
+
+static int __init jbd2_journal_init_journal_head_cache(void)
+{
+	J_ASSERT(!jbd2_journal_head_cache);
+	jbd2_journal_head_cache = kmem_cache_create("jbd2_journal_head",
+				sizeof(struct journal_head),
+				0,		/* offset */
+				SLAB_TEMPORARY | SLAB_TYPESAFE_BY_RCU,
+				NULL);		/* ctor */
+	if (!jbd2_journal_head_cache) {
+		printk(KERN_EMERG "JBD2: no memory for journal_head cache\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static void jbd2_journal_destroy_journal_head_cache(void)
+{
+	kmem_cache_destroy(jbd2_journal_head_cache);
+	jbd2_journal_head_cache = NULL;
+}
+
+/*
+ * journal_head splicing and dicing
+ */
+static struct journal_head *journal_alloc_journal_head(void)
+{
+	struct journal_head *ret;
+
+#ifdef CONFIG_JBD2_DEBUG
+	atomic_inc(&nr_journal_heads);
+#endif
+	ret = kmem_cache_zalloc(jbd2_journal_head_cache, GFP_NOFS);
+	if (!ret) {
+		jbd2_debug(1, "out of memory for journal_head\n");
+		pr_notice_ratelimited("ENOMEM in %s, retrying.\n", __func__);
+		ret = kmem_cache_zalloc(jbd2_journal_head_cache,
+				GFP_NOFS | __GFP_NOFAIL);
+	}
+	if (ret)
+		spin_lock_init(&ret->b_state_lock);
+	return ret;
+}
+
+static void journal_free_journal_head(struct journal_head *jh)
+{
+#ifdef CONFIG_JBD2_DEBUG
+	atomic_dec(&nr_journal_heads);
+	memset(jh, JBD2_POISON_FREE, sizeof(*jh));
+#endif
+	kmem_cache_free(jbd2_journal_head_cache, jh);
+}
+
+/*
+ * A journal_head is attached to a buffer_head whenever JBD has an
+ * interest in the buffer.
+ *
+ * Whenever a buffer has an attached journal_head, its ->b_state:BH_JBD bit
+ * is set.  This bit is tested in core kernel code where we need to take
+ * JBD-specific actions.  Testing the zeroness of ->b_private is not reliable
+ * there.
+ *
+ * When a buffer has its BH_JBD bit set, its ->b_count is elevated by one.
+ *
+ * When a buffer has its BH_JBD bit set it is immune from being released by
+ * core kernel code, mainly via ->b_count.
+ *
+ * A journal_head is detached from its buffer_head when the journal_head's
+ * b_jcount reaches zero. Running transaction (b_transaction) and checkpoint
+ * transaction (b_cp_transaction) hold their references to b_jcount.
+ *
+ * Various places in the kernel want to attach a journal_head to a buffer_head
+ * _before_ attaching the journal_head to a transaction.  To protect the
+ * journal_head in this situation, jbd2_journal_add_journal_head elevates the
+ * journal_head's b_jcount refcount by one.  The caller must call
+ * jbd2_journal_put_journal_head() to undo this.
+ *
+ * So the typical usage would be:
+ *
+ *	(Attach a journal_head if needed.  Increments b_jcount)
+ *	struct journal_head *jh = jbd2_journal_add_journal_head(bh);
+ *	...
+ *      (Get another reference for transaction)
+ *	jbd2_journal_grab_journal_head(bh);
+ *	jh->b_transaction = xxx;
+ *	(Put original reference)
+ *	jbd2_journal_put_journal_head(jh);
+ */
+
+/*
+ * Give a buffer_head a journal_head.
+ *
+ * May sleep.
+ */
+struct journal_head *jbd2_journal_add_journal_head(struct buffer_head *bh)
+{
+	struct journal_head *jh;
+	struct journal_head *new_jh = NULL;
+
+repeat:
+	if (!buffer_jbd(bh))
+		new_jh = journal_alloc_journal_head();
+
+	jbd_lock_bh_journal_head(bh);
+	if (buffer_jbd(bh)) {
+		jh = bh2jh(bh);
+	} else {
+		J_ASSERT_BH(bh,
+			(atomic_read(&bh->b_count) > 0) ||
+			(bh->b_page && bh->b_page->mapping));
+
+		if (!new_jh) {
+			jbd_unlock_bh_journal_head(bh);
+			goto repeat;
+		}
+
+		jh = new_jh;
+		new_jh = NULL;		/* We consumed it */
+		set_buffer_jbd(bh);
+		bh->b_private = jh;
+		jh->b_bh = bh;
+		get_bh(bh);
+		BUFFER_TRACE(bh, "added journal_head");
+	}
+	jh->b_jcount++;
+	jbd_unlock_bh_journal_head(bh);
+	if (new_jh)
+		journal_free_journal_head(new_jh);
+	return bh->b_private;
+}
+
+/*
+ * Grab a ref against this buffer_head's journal_head.  If it ended up not
+ * having a journal_head, return NULL
+ */
+struct journal_head *jbd2_journal_grab_journal_head(struct buffer_head *bh)
+{
+	struct journal_head *jh = NULL;
+
+	jbd_lock_bh_journal_head(bh);
+	if (buffer_jbd(bh)) {
+		jh = bh2jh(bh);
+		jh->b_jcount++;
+	}
+	jbd_unlock_bh_journal_head(bh);
+	return jh;
+}
+EXPORT_SYMBOL(jbd2_journal_grab_journal_head);
+
+static void __journal_remove_journal_head(struct buffer_head *bh)
+{
+	struct journal_head *jh = bh2jh(bh);
+
+	J_ASSERT_JH(jh, jh->b_transaction == NULL);
+	J_ASSERT_JH(jh, jh->b_next_transaction == NULL);
+	J_ASSERT_JH(jh, jh->b_cp_transaction == NULL);
+	J_ASSERT_JH(jh, jh->b_jlist == BJ_None);
+	J_ASSERT_BH(bh, buffer_jbd(bh));
+	J_ASSERT_BH(bh, jh2bh(jh) == bh);
+	BUFFER_TRACE(bh, "remove journal_head");
+
+	/* Unlink before dropping the lock */
+	bh->b_private = NULL;
+	jh->b_bh = NULL;	/* debug, really */
+	clear_buffer_jbd(bh);
+}
+
+static void journal_release_journal_head(struct journal_head *jh, size_t b_size)
+{
+	if (jh->b_frozen_data) {
+		printk(KERN_WARNING "%s: freeing b_frozen_data\n", __func__);
+		jbd2_free(jh->b_frozen_data, b_size);
+	}
+	if (jh->b_committed_data) {
+		printk(KERN_WARNING "%s: freeing b_committed_data\n", __func__);
+		jbd2_free(jh->b_committed_data, b_size);
+	}
+	journal_free_journal_head(jh);
+}
+
+/*
+ * Drop a reference on the passed journal_head.  If it fell to zero then
+ * release the journal_head from the buffer_head.
+ */
+void jbd2_journal_put_journal_head(struct journal_head *jh)
+{
+	struct buffer_head *bh = jh2bh(jh);
+
+	jbd_lock_bh_journal_head(bh);
+	J_ASSERT_JH(jh, jh->b_jcount > 0);
+	--jh->b_jcount;
+	if (!jh->b_jcount) {
+		__journal_remove_journal_head(bh);
+		jbd_unlock_bh_journal_head(bh);
+		journal_release_journal_head(jh, bh->b_size);
+		__brelse(bh);
+	} else {
+		jbd_unlock_bh_journal_head(bh);
+	}
+}
+EXPORT_SYMBOL(jbd2_journal_put_journal_head);
+
+/*
+ * Initialize jbd inode head
+ */
+void jbd2_journal_init_jbd_inode(struct jbd2_inode *jinode, struct inode *inode)
+{
+	jinode->i_transaction = NULL;
+	jinode->i_next_transaction = NULL;
+	jinode->i_vfs_inode = inode;
+	jinode->i_flags = 0;
+	jinode->i_dirty_start = 0;
+	jinode->i_dirty_end = 0;
+	INIT_LIST_HEAD(&jinode->i_list);
+}
+
+/*
+ * Function to be called before we start removing inode from memory (i.e.,
+ * clear_inode() is a fine place to be called from). It removes inode from
+ * transaction's lists.
+ */
+void jbd2_journal_release_jbd_inode(journal_t *journal,
+				    struct jbd2_inode *jinode)
+{
+	if (!journal)
+		return;
+restart:
+	spin_lock(&journal->j_list_lock);
+	/* Is commit writing out inode - we have to wait */
+	if (jinode->i_flags & JI_COMMIT_RUNNING) {
+		wait_queue_head_t *wq;
+		DEFINE_WAIT_BIT(wait, &jinode->i_flags, __JI_COMMIT_RUNNING);
+		wq = bit_waitqueue(&jinode->i_flags, __JI_COMMIT_RUNNING);
+		prepare_to_wait(wq, &wait.wq_entry, TASK_UNINTERRUPTIBLE);
+		spin_unlock(&journal->j_list_lock);
+		schedule();
+		finish_wait(wq, &wait.wq_entry);
+		goto restart;
+	}
+
+	if (jinode->i_transaction) {
+		list_del(&jinode->i_list);
+		jinode->i_transaction = NULL;
+	}
+	spin_unlock(&journal->j_list_lock);
+}
+
+
+#ifdef CONFIG_PROC_FS
+
+#define JBD2_STATS_PROC_NAME "fs/jbd2"
+
+static void __init jbd2_create_jbd_stats_proc_entry(void)
+{
+	proc_jbd2_stats = proc_mkdir(JBD2_STATS_PROC_NAME, NULL);
+}
+
+static void __exit jbd2_remove_jbd_stats_proc_entry(void)
+{
+	if (proc_jbd2_stats)
+		remove_proc_entry(JBD2_STATS_PROC_NAME, NULL);
+}
+
+#else
+
+#define jbd2_create_jbd_stats_proc_entry() do {} while (0)
+#define jbd2_remove_jbd_stats_proc_entry() do {} while (0)
+
+#endif
+
+struct kmem_cache *jbd2_handle_cache, *jbd2_inode_cache;
+
+static int __init jbd2_journal_init_inode_cache(void)
+{
+	J_ASSERT(!jbd2_inode_cache);
+	jbd2_inode_cache = KMEM_CACHE(jbd2_inode, 0);
+	if (!jbd2_inode_cache) {
+		pr_emerg("JBD2: failed to create inode cache\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int __init jbd2_journal_init_handle_cache(void)
+{
+	J_ASSERT(!jbd2_handle_cache);
+	jbd2_handle_cache = KMEM_CACHE(jbd2_journal_handle, SLAB_TEMPORARY);
+	if (!jbd2_handle_cache) {
+		printk(KERN_EMERG "JBD2: failed to create handle cache\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static void jbd2_journal_destroy_inode_cache(void)
+{
+	kmem_cache_destroy(jbd2_inode_cache);
+	jbd2_inode_cache = NULL;
+}
+
+static void jbd2_journal_destroy_handle_cache(void)
+{
+	kmem_cache_destroy(jbd2_handle_cache);
+	jbd2_handle_cache = NULL;
+}
+
+/*
+ * Module startup and shutdown
+ */
+
+static int __init journal_init_caches(void)
+{
+	int ret;
+
+	ret = jbd2_journal_init_revoke_record_cache();
+	if (ret == 0)
+		ret = jbd2_journal_init_revoke_table_cache();
+	if (ret == 0)
+		ret = jbd2_journal_init_journal_head_cache();
+	if (ret == 0)
+		ret = jbd2_journal_init_handle_cache();
+	if (ret == 0)
+		ret = jbd2_journal_init_inode_cache();
+	if (ret == 0)
+		ret = jbd2_journal_init_transaction_cache();
+	return ret;
+}
+
+static void jbd2_journal_destroy_caches(void)
+{
+	jbd2_journal_destroy_revoke_record_cache();
+	jbd2_journal_destroy_revoke_table_cache();
+	jbd2_journal_destroy_journal_head_cache();
+	jbd2_journal_destroy_handle_cache();
+	jbd2_journal_destroy_inode_cache();
+	jbd2_journal_destroy_transaction_cache();
+	jbd2_journal_destroy_slabs();
+}
+
+static int __init journal_init(void)
+{
+	int ret;
+
+	BUILD_BUG_ON(sizeof(struct journal_superblock_s) != 1024);
+
+	ret = journal_init_caches();
+	if (ret == 0) {
+		jbd2_create_jbd_stats_proc_entry();
+	} else {
+		jbd2_journal_destroy_caches();
+	}
+	return ret;
+}
+
+static void __exit journal_exit(void)
+{
+#ifdef CONFIG_JBD2_DEBUG
+	int n = atomic_read(&nr_journal_heads);
+	if (n)
+		printk(KERN_ERR "JBD2: leaked %d journal_heads!\n", n);
+#endif
+	jbd2_remove_jbd_stats_proc_entry();
+	jbd2_journal_destroy_caches();
+}
+
+MODULE_LICENSE("GPL");
+module_init(journal_init);
+module_exit(journal_exit);
+
diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
new file mode 100644
index 000000000..2426b89f1
--- /dev/null
+++ b/fs/jbd2/recovery.c
@@ -0,0 +1,938 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * linux/fs/jbd2/recovery.c
+ *
+ * Written by Stephen C. Tweedie <sct@redhat.com>, 1999
+ *
+ * Copyright 1999-2000 Red Hat Software --- All Rights Reserved
+ *
+ * Journal recovery routines for the generic filesystem journaling code;
+ * part of the ext2fs journaling system.
+ */
+
+#ifndef __KERNEL__
+#include "jfs_user.h"
+#else
+#include <linux/time.h>
+#include <linux/fs.h>
+#include <linux/jbd2.h>
+#include <linux/errno.h>
+#include <linux/crc32.h>
+#include <linux/blkdev.h>
+#endif
+
+/*
+ * Maintain information about the progress of the recovery job, so that
+ * the different passes can carry information between them.
+ */
+struct recovery_info
+{
+	tid_t		start_transaction;
+	tid_t		end_transaction;
+
+	int		nr_replays;
+	int		nr_revokes;
+	int		nr_revoke_hits;
+};
+
+static int do_one_pass(journal_t *journal,
+				struct recovery_info *info, enum passtype pass);
+static int scan_revoke_records(journal_t *, struct buffer_head *,
+				tid_t, struct recovery_info *);
+
+#ifdef __KERNEL__
+
+/* Release readahead buffers after use */
+static void journal_brelse_array(struct buffer_head *b[], int n)
+{
+	while (--n >= 0)
+		brelse (b[n]);
+}
+
+
+/*
+ * When reading from the journal, we are going through the block device
+ * layer directly and so there is no readahead being done for us.  We
+ * need to implement any readahead ourselves if we want it to happen at
+ * all.  Recovery is basically one long sequential read, so make sure we
+ * do the IO in reasonably large chunks.
+ *
+ * This is not so critical that we need to be enormously clever about
+ * the readahead size, though.  128K is a purely arbitrary, good-enough
+ * fixed value.
+ */
+
+#define MAXBUF 8
+static int do_readahead(journal_t *journal, unsigned int start)
+{
+	int err;
+	unsigned int max, nbufs, next;
+	unsigned long long blocknr;
+	struct buffer_head *bh;
+
+	struct buffer_head * bufs[MAXBUF];
+
+	/* Do up to 128K of readahead */
+	max = start + (128 * 1024 / journal->j_blocksize);
+	if (max > journal->j_total_len)
+		max = journal->j_total_len;
+
+	/* Do the readahead itself.  We'll submit MAXBUF buffer_heads at
+	 * a time to the block device IO layer. */
+
+	nbufs = 0;
+
+	for (next = start; next < max; next++) {
+		err = jbd2_journal_bmap(journal, next, &blocknr);
+
+		if (err) {
+			printk(KERN_ERR "JBD2: bad block at offset %u\n",
+				next);
+			goto failed;
+		}
+
+		bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
+		if (!bh) {
+			err = -ENOMEM;
+			goto failed;
+		}
+
+		if (!buffer_uptodate(bh) && !buffer_locked(bh)) {
+			bufs[nbufs++] = bh;
+			if (nbufs == MAXBUF) {
+				bh_readahead_batch(nbufs, bufs, 0);
+				journal_brelse_array(bufs, nbufs);
+				nbufs = 0;
+			}
+		} else
+			brelse(bh);
+	}
+
+	if (nbufs)
+		bh_readahead_batch(nbufs, bufs, 0);
+	err = 0;
+
+failed:
+	if (nbufs)
+		journal_brelse_array(bufs, nbufs);
+	return err;
+}
+
+#endif /* __KERNEL__ */
+
+
+/*
+ * Read a block from the journal
+ */
+
+static int jread(struct buffer_head **bhp, journal_t *journal,
+		 unsigned int offset)
+{
+	int err;
+	unsigned long long blocknr;
+	struct buffer_head *bh;
+
+	*bhp = NULL;
+
+	if (offset >= journal->j_total_len) {
+		printk(KERN_ERR "JBD2: corrupted journal superblock\n");
+		return -EFSCORRUPTED;
+	}
+
+	err = jbd2_journal_bmap(journal, offset, &blocknr);
+
+	if (err) {
+		printk(KERN_ERR "JBD2: bad block at offset %u\n",
+			offset);
+		return err;
+	}
+
+	bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
+	if (!bh)
+		return -ENOMEM;
+
+	if (!buffer_uptodate(bh)) {
+		/*
+		 * If this is a brand new buffer, start readahead.
+		 * Otherwise, we assume we are already reading it.
+		 */
+		bool need_readahead = !buffer_req(bh);
+
+		bh_read_nowait(bh, 0);
+		if (need_readahead)
+			do_readahead(journal, offset);
+		wait_on_buffer(bh);
+	}
+
+	if (!buffer_uptodate(bh)) {
+		printk(KERN_ERR "JBD2: Failed to read block at offset %u\n",
+			offset);
+		brelse(bh);
+		return -EIO;
+	}
+
+	*bhp = bh;
+	return 0;
+}
+
+static int jbd2_descriptor_block_csum_verify(journal_t *j, void *buf)
+{
+	struct jbd2_journal_block_tail *tail;
+	__be32 provided;
+	__u32 calculated;
+
+	if (!jbd2_journal_has_csum_v2or3(j))
+		return 1;
+
+	tail = (struct jbd2_journal_block_tail *)((char *)buf +
+		j->j_blocksize - sizeof(struct jbd2_journal_block_tail));
+	provided = tail->t_checksum;
+	tail->t_checksum = 0;
+	calculated = jbd2_chksum(j, j->j_csum_seed, buf, j->j_blocksize);
+	tail->t_checksum = provided;
+
+	return provided == cpu_to_be32(calculated);
+}
+
+/*
+ * Count the number of in-use tags in a journal descriptor block.
+ */
+
+static int count_tags(journal_t *journal, struct buffer_head *bh)
+{
+	char *			tagp;
+	journal_block_tag_t	tag;
+	int			nr = 0, size = journal->j_blocksize;
+	int			tag_bytes = journal_tag_bytes(journal);
+
+	if (jbd2_journal_has_csum_v2or3(journal))
+		size -= sizeof(struct jbd2_journal_block_tail);
+
+	tagp = &bh->b_data[sizeof(journal_header_t)];
+
+	while ((tagp - bh->b_data + tag_bytes) <= size) {
+		memcpy(&tag, tagp, sizeof(tag));
+
+		nr++;
+		tagp += tag_bytes;
+		if (!(tag.t_flags & cpu_to_be16(JBD2_FLAG_SAME_UUID)))
+			tagp += 16;
+
+		if (tag.t_flags & cpu_to_be16(JBD2_FLAG_LAST_TAG))
+			break;
+	}
+
+	return nr;
+}
+
+
+/* Make sure we wrap around the log correctly! */
+#define wrap(journal, var)						\
+do {									\
+	if (var >= (journal)->j_last)					\
+		var -= ((journal)->j_last - (journal)->j_first);	\
+} while (0)
+
+static int fc_do_one_pass(journal_t *journal,
+			  struct recovery_info *info, enum passtype pass)
+{
+	unsigned int expected_commit_id = info->end_transaction;
+	unsigned long next_fc_block;
+	struct buffer_head *bh;
+	int err = 0;
+
+	next_fc_block = journal->j_fc_first;
+	if (!journal->j_fc_replay_callback)
+		return 0;
+
+	while (next_fc_block <= journal->j_fc_last) {
+		jbd2_debug(3, "Fast commit replay: next block %ld\n",
+			  next_fc_block);
+		err = jread(&bh, journal, next_fc_block);
+		if (err) {
+			jbd2_debug(3, "Fast commit replay: read error\n");
+			break;
+		}
+
+		err = journal->j_fc_replay_callback(journal, bh, pass,
+					next_fc_block - journal->j_fc_first,
+					expected_commit_id);
+		brelse(bh);
+		next_fc_block++;
+		if (err < 0 || err == JBD2_FC_REPLAY_STOP)
+			break;
+		err = 0;
+	}
+
+	if (err)
+		jbd2_debug(3, "Fast commit replay failed, err = %d\n", err);
+
+	return err;
+}
+
+/**
+ * jbd2_journal_recover - recovers a on-disk journal
+ * @journal: the journal to recover
+ *
+ * The primary function for recovering the log contents when mounting a
+ * journaled device.
+ *
+ * Recovery is done in three passes.  In the first pass, we look for the
+ * end of the log.  In the second, we assemble the list of revoke
+ * blocks.  In the third and final pass, we replay any un-revoked blocks
+ * in the log.
+ */
+int jbd2_journal_recover(journal_t *journal)
+{
+	int			err, err2;
+	journal_superblock_t *	sb;
+
+	struct recovery_info	info;
+	errseq_t		wb_err;
+	struct address_space	*mapping;
+
+	memset(&info, 0, sizeof(info));
+	sb = journal->j_superblock;
+
+	/*
+	 * The journal superblock's s_start field (the current log head)
+	 * is always zero if, and only if, the journal was cleanly
+	 * unmounted.
+	 */
+
+	if (!sb->s_start) {
+		jbd2_debug(1, "No recovery required, last transaction %d\n",
+			  be32_to_cpu(sb->s_sequence));
+		journal->j_transaction_sequence = be32_to_cpu(sb->s_sequence) + 1;
+		return 0;
+	}
+
+	wb_err = 0;
+	mapping = journal->j_fs_dev->bd_inode->i_mapping;
+	errseq_check_and_advance(&mapping->wb_err, &wb_err);
+	err = do_one_pass(journal, &info, PASS_SCAN);
+	if (!err)
+		err = do_one_pass(journal, &info, PASS_REVOKE);
+	if (!err)
+		err = do_one_pass(journal, &info, PASS_REPLAY);
+
+	jbd2_debug(1, "JBD2: recovery, exit status %d, "
+		  "recovered transactions %u to %u\n",
+		  err, info.start_transaction, info.end_transaction);
+	jbd2_debug(1, "JBD2: Replayed %d and revoked %d/%d blocks\n",
+		  info.nr_replays, info.nr_revoke_hits, info.nr_revokes);
+
+	/* Restart the log at the next transaction ID, thus invalidating
+	 * any existing commit records in the log. */
+	journal->j_transaction_sequence = ++info.end_transaction;
+
+	jbd2_journal_clear_revoke(journal);
+	err2 = sync_blockdev(journal->j_fs_dev);
+	if (!err)
+		err = err2;
+	err2 = errseq_check_and_advance(&mapping->wb_err, &wb_err);
+	if (!err)
+		err = err2;
+	/* Make sure all replayed data is on permanent storage */
+	if (journal->j_flags & JBD2_BARRIER) {
+		err2 = blkdev_issue_flush(journal->j_fs_dev);
+		if (!err)
+			err = err2;
+	}
+	return err;
+}
+
+/**
+ * jbd2_journal_skip_recovery - Start journal and wipe exiting records
+ * @journal: journal to startup
+ *
+ * Locate any valid recovery information from the journal and set up the
+ * journal structures in memory to ignore it (presumably because the
+ * caller has evidence that it is out of date).
+ * This function doesn't appear to be exported..
+ *
+ * We perform one pass over the journal to allow us to tell the user how
+ * much recovery information is being erased, and to let us initialise
+ * the journal transaction sequence numbers to the next unused ID.
+ */
+int jbd2_journal_skip_recovery(journal_t *journal)
+{
+	int			err;
+
+	struct recovery_info	info;
+
+	memset (&info, 0, sizeof(info));
+
+	err = do_one_pass(journal, &info, PASS_SCAN);
+
+	if (err) {
+		printk(KERN_ERR "JBD2: error %d scanning journal\n", err);
+		++journal->j_transaction_sequence;
+	} else {
+#ifdef CONFIG_JBD2_DEBUG
+		int dropped = info.end_transaction - 
+			be32_to_cpu(journal->j_superblock->s_sequence);
+		jbd2_debug(1,
+			  "JBD2: ignoring %d transaction%s from the journal.\n",
+			  dropped, (dropped == 1) ? "" : "s");
+#endif
+		journal->j_transaction_sequence = ++info.end_transaction;
+	}
+
+	journal->j_tail = 0;
+	return err;
+}
+
+static inline unsigned long long read_tag_block(journal_t *journal,
+						journal_block_tag_t *tag)
+{
+	unsigned long long block = be32_to_cpu(tag->t_blocknr);
+	if (jbd2_has_feature_64bit(journal))
+		block |= (u64)be32_to_cpu(tag->t_blocknr_high) << 32;
+	return block;
+}
+
+/*
+ * calc_chksums calculates the checksums for the blocks described in the
+ * descriptor block.
+ */
+static int calc_chksums(journal_t *journal, struct buffer_head *bh,
+			unsigned long *next_log_block, __u32 *crc32_sum)
+{
+	int i, num_blks, err;
+	unsigned long io_block;
+	struct buffer_head *obh;
+
+	num_blks = count_tags(journal, bh);
+	/* Calculate checksum of the descriptor block. */
+	*crc32_sum = crc32_be(*crc32_sum, (void *)bh->b_data, bh->b_size);
+
+	for (i = 0; i < num_blks; i++) {
+		io_block = (*next_log_block)++;
+		wrap(journal, *next_log_block);
+		err = jread(&obh, journal, io_block);
+		if (err) {
+			printk(KERN_ERR "JBD2: IO error %d recovering block "
+				"%lu in log\n", err, io_block);
+			return 1;
+		} else {
+			*crc32_sum = crc32_be(*crc32_sum, (void *)obh->b_data,
+				     obh->b_size);
+		}
+		put_bh(obh);
+	}
+	return 0;
+}
+
+static int jbd2_commit_block_csum_verify(journal_t *j, void *buf)
+{
+	struct commit_header *h;
+	__be32 provided;
+	__u32 calculated;
+
+	if (!jbd2_journal_has_csum_v2or3(j))
+		return 1;
+
+	h = buf;
+	provided = h->h_chksum[0];
+	h->h_chksum[0] = 0;
+	calculated = jbd2_chksum(j, j->j_csum_seed, buf, j->j_blocksize);
+	h->h_chksum[0] = provided;
+
+	return provided == cpu_to_be32(calculated);
+}
+
+static int jbd2_block_tag_csum_verify(journal_t *j, journal_block_tag_t *tag,
+				      journal_block_tag3_t *tag3,
+				      void *buf, __u32 sequence)
+{
+	__u32 csum32;
+	__be32 seq;
+
+	if (!jbd2_journal_has_csum_v2or3(j))
+		return 1;
+
+	seq = cpu_to_be32(sequence);
+	csum32 = jbd2_chksum(j, j->j_csum_seed, (__u8 *)&seq, sizeof(seq));
+	csum32 = jbd2_chksum(j, csum32, buf, j->j_blocksize);
+
+	if (jbd2_has_feature_csum3(j))
+		return tag3->t_checksum == cpu_to_be32(csum32);
+	else
+		return tag->t_checksum == cpu_to_be16(csum32);
+}
+
+static int do_one_pass(journal_t *journal,
+			struct recovery_info *info, enum passtype pass)
+{
+	unsigned int		first_commit_ID, next_commit_ID;
+	unsigned long		next_log_block;
+	int			err, success = 0;
+	journal_superblock_t *	sb;
+	journal_header_t *	tmp;
+	struct buffer_head *	bh;
+	unsigned int		sequence;
+	int			blocktype;
+	int			tag_bytes = journal_tag_bytes(journal);
+	__u32			crc32_sum = ~0; /* Transactional Checksums */
+	int			descr_csum_size = 0;
+	int			block_error = 0;
+	bool			need_check_commit_time = false;
+	__u64			last_trans_commit_time = 0, commit_time;
+
+	/*
+	 * First thing is to establish what we expect to find in the log
+	 * (in terms of transaction IDs), and where (in terms of log
+	 * block offsets): query the superblock.
+	 */
+
+	sb = journal->j_superblock;
+	next_commit_ID = be32_to_cpu(sb->s_sequence);
+	next_log_block = be32_to_cpu(sb->s_start);
+
+	first_commit_ID = next_commit_ID;
+	if (pass == PASS_SCAN)
+		info->start_transaction = first_commit_ID;
+
+	jbd2_debug(1, "Starting recovery pass %d\n", pass);
+
+	/*
+	 * Now we walk through the log, transaction by transaction,
+	 * making sure that each transaction has a commit block in the
+	 * expected place.  Each complete transaction gets replayed back
+	 * into the main filesystem.
+	 */
+
+	while (1) {
+		int			flags;
+		char *			tagp;
+		journal_block_tag_t	tag;
+		struct buffer_head *	obh;
+		struct buffer_head *	nbh;
+
+		cond_resched();
+
+		/* If we already know where to stop the log traversal,
+		 * check right now that we haven't gone past the end of
+		 * the log. */
+
+		if (pass != PASS_SCAN)
+			if (tid_geq(next_commit_ID, info->end_transaction))
+				break;
+
+		jbd2_debug(2, "Scanning for sequence ID %u at %lu/%lu\n",
+			  next_commit_ID, next_log_block, journal->j_last);
+
+		/* Skip over each chunk of the transaction looking
+		 * either the next descriptor block or the final commit
+		 * record. */
+
+		jbd2_debug(3, "JBD2: checking block %ld\n", next_log_block);
+		err = jread(&bh, journal, next_log_block);
+		if (err)
+			goto failed;
+
+		next_log_block++;
+		wrap(journal, next_log_block);
+
+		/* What kind of buffer is it?
+		 *
+		 * If it is a descriptor block, check that it has the
+		 * expected sequence number.  Otherwise, we're all done
+		 * here. */
+
+		tmp = (journal_header_t *)bh->b_data;
+
+		if (tmp->h_magic != cpu_to_be32(JBD2_MAGIC_NUMBER)) {
+			brelse(bh);
+			break;
+		}
+
+		blocktype = be32_to_cpu(tmp->h_blocktype);
+		sequence = be32_to_cpu(tmp->h_sequence);
+		jbd2_debug(3, "Found magic %d, sequence %d\n",
+			  blocktype, sequence);
+
+		if (sequence != next_commit_ID) {
+			brelse(bh);
+			break;
+		}
+
+		/* OK, we have a valid descriptor block which matches
+		 * all of the sequence number checks.  What are we going
+		 * to do with it?  That depends on the pass... */
+
+		switch(blocktype) {
+		case JBD2_DESCRIPTOR_BLOCK:
+			/* Verify checksum first */
+			if (jbd2_journal_has_csum_v2or3(journal))
+				descr_csum_size =
+					sizeof(struct jbd2_journal_block_tail);
+			if (descr_csum_size > 0 &&
+			    !jbd2_descriptor_block_csum_verify(journal,
+							       bh->b_data)) {
+				/*
+				 * PASS_SCAN can see stale blocks due to lazy
+				 * journal init. Don't error out on those yet.
+				 */
+				if (pass != PASS_SCAN) {
+					pr_err("JBD2: Invalid checksum recovering block %lu in log\n",
+					       next_log_block);
+					err = -EFSBADCRC;
+					brelse(bh);
+					goto failed;
+				}
+				need_check_commit_time = true;
+				jbd2_debug(1,
+					"invalid descriptor block found in %lu\n",
+					next_log_block);
+			}
+
+			/* If it is a valid descriptor block, replay it
+			 * in pass REPLAY; if journal_checksums enabled, then
+			 * calculate checksums in PASS_SCAN, otherwise,
+			 * just skip over the blocks it describes. */
+			if (pass != PASS_REPLAY) {
+				if (pass == PASS_SCAN &&
+				    jbd2_has_feature_checksum(journal) &&
+				    !need_check_commit_time &&
+				    !info->end_transaction) {
+					if (calc_chksums(journal, bh,
+							&next_log_block,
+							&crc32_sum)) {
+						put_bh(bh);
+						break;
+					}
+					put_bh(bh);
+					continue;
+				}
+				next_log_block += count_tags(journal, bh);
+				wrap(journal, next_log_block);
+				put_bh(bh);
+				continue;
+			}
+
+			/* A descriptor block: we can now write all of
+			 * the data blocks.  Yay, useful work is finally
+			 * getting done here! */
+
+			tagp = &bh->b_data[sizeof(journal_header_t)];
+			while ((tagp - bh->b_data + tag_bytes)
+			       <= journal->j_blocksize - descr_csum_size) {
+				unsigned long io_block;
+
+				memcpy(&tag, tagp, sizeof(tag));
+				flags = be16_to_cpu(tag.t_flags);
+
+				io_block = next_log_block++;
+				wrap(journal, next_log_block);
+				err = jread(&obh, journal, io_block);
+				if (err) {
+					/* Recover what we can, but
+					 * report failure at the end. */
+					success = err;
+					printk(KERN_ERR
+						"JBD2: IO error %d recovering "
+						"block %ld in log\n",
+						err, io_block);
+				} else {
+					unsigned long long blocknr;
+
+					J_ASSERT(obh != NULL);
+					blocknr = read_tag_block(journal,
+								 &tag);
+
+					/* If the block has been
+					 * revoked, then we're all done
+					 * here. */
+					if (jbd2_journal_test_revoke
+					    (journal, blocknr,
+					     next_commit_ID)) {
+						brelse(obh);
+						++info->nr_revoke_hits;
+						goto skip_write;
+					}
+
+					/* Look for block corruption */
+					if (!jbd2_block_tag_csum_verify(
+			journal, &tag, (journal_block_tag3_t *)tagp,
+			obh->b_data, be32_to_cpu(tmp->h_sequence))) {
+						brelse(obh);
+						success = -EFSBADCRC;
+						printk(KERN_ERR "JBD2: Invalid "
+						       "checksum recovering "
+						       "data block %llu in "
+						       "log\n", blocknr);
+						block_error = 1;
+						goto skip_write;
+					}
+
+					/* Find a buffer for the new
+					 * data being restored */
+					nbh = __getblk(journal->j_fs_dev,
+							blocknr,
+							journal->j_blocksize);
+					if (nbh == NULL) {
+						printk(KERN_ERR
+						       "JBD2: Out of memory "
+						       "during recovery.\n");
+						err = -ENOMEM;
+						brelse(bh);
+						brelse(obh);
+						goto failed;
+					}
+
+					lock_buffer(nbh);
+					memcpy(nbh->b_data, obh->b_data,
+							journal->j_blocksize);
+					if (flags & JBD2_FLAG_ESCAPE) {
+						*((__be32 *)nbh->b_data) =
+						cpu_to_be32(JBD2_MAGIC_NUMBER);
+					}
+
+					BUFFER_TRACE(nbh, "marking dirty");
+					set_buffer_uptodate(nbh);
+					mark_buffer_dirty(nbh);
+					BUFFER_TRACE(nbh, "marking uptodate");
+					++info->nr_replays;
+					unlock_buffer(nbh);
+					brelse(obh);
+					brelse(nbh);
+				}
+
+			skip_write:
+				tagp += tag_bytes;
+				if (!(flags & JBD2_FLAG_SAME_UUID))
+					tagp += 16;
+
+				if (flags & JBD2_FLAG_LAST_TAG)
+					break;
+			}
+
+			brelse(bh);
+			continue;
+
+		case JBD2_COMMIT_BLOCK:
+			/*     How to differentiate between interrupted commit
+			 *               and journal corruption ?
+			 *
+			 * {nth transaction}
+			 *        Checksum Verification Failed
+			 *			 |
+			 *		 ____________________
+			 *		|		     |
+			 * 	async_commit             sync_commit
+			 *     		|                    |
+			 *		| GO TO NEXT    "Journal Corruption"
+			 *		| TRANSACTION
+			 *		|
+			 * {(n+1)th transanction}
+			 *		|
+			 * 	 _______|______________
+			 * 	|	 	      |
+			 * Commit block found	Commit block not found
+			 *      |		      |
+			 * "Journal Corruption"       |
+			 *		 _____________|_________
+			 *     		|	           	|
+			 *	nth trans corrupt	OR   nth trans
+			 *	and (n+1)th interrupted     interrupted
+			 *	before commit block
+			 *      could reach the disk.
+			 *	(Cannot find the difference in above
+			 *	 mentioned conditions. Hence assume
+			 *	 "Interrupted Commit".)
+			 */
+			commit_time = be64_to_cpu(
+				((struct commit_header *)bh->b_data)->h_commit_sec);
+			/*
+			 * If need_check_commit_time is set, it means we are in
+			 * PASS_SCAN and csum verify failed before. If
+			 * commit_time is increasing, it's the same journal,
+			 * otherwise it is stale journal block, just end this
+			 * recovery.
+			 */
+			if (need_check_commit_time) {
+				if (commit_time >= last_trans_commit_time) {
+					pr_err("JBD2: Invalid checksum found in transaction %u\n",
+					       next_commit_ID);
+					err = -EFSBADCRC;
+					brelse(bh);
+					goto failed;
+				}
+			ignore_crc_mismatch:
+				/*
+				 * It likely does not belong to same journal,
+				 * just end this recovery with success.
+				 */
+				jbd2_debug(1, "JBD2: Invalid checksum ignored in transaction %u, likely stale data\n",
+					  next_commit_ID);
+				brelse(bh);
+				goto done;
+			}
+
+			/*
+			 * Found an expected commit block: if checksums
+			 * are present, verify them in PASS_SCAN; else not
+			 * much to do other than move on to the next sequence
+			 * number.
+			 */
+			if (pass == PASS_SCAN &&
+			    jbd2_has_feature_checksum(journal)) {
+				struct commit_header *cbh =
+					(struct commit_header *)bh->b_data;
+				unsigned found_chksum =
+					be32_to_cpu(cbh->h_chksum[0]);
+
+				if (info->end_transaction) {
+					journal->j_failed_commit =
+						info->end_transaction;
+					brelse(bh);
+					break;
+				}
+
+				/* Neither checksum match nor unused? */
+				if (!((crc32_sum == found_chksum &&
+				       cbh->h_chksum_type ==
+						JBD2_CRC32_CHKSUM &&
+				       cbh->h_chksum_size ==
+						JBD2_CRC32_CHKSUM_SIZE) ||
+				      (cbh->h_chksum_type == 0 &&
+				       cbh->h_chksum_size == 0 &&
+				       found_chksum == 0)))
+					goto chksum_error;
+
+				crc32_sum = ~0;
+			}
+			if (pass == PASS_SCAN &&
+			    !jbd2_commit_block_csum_verify(journal,
+							   bh->b_data)) {
+			chksum_error:
+				if (commit_time < last_trans_commit_time)
+					goto ignore_crc_mismatch;
+				info->end_transaction = next_commit_ID;
+
+				if (!jbd2_has_feature_async_commit(journal)) {
+					journal->j_failed_commit =
+						next_commit_ID;
+					brelse(bh);
+					break;
+				}
+			}
+			if (pass == PASS_SCAN)
+				last_trans_commit_time = commit_time;
+			brelse(bh);
+			next_commit_ID++;
+			continue;
+
+		case JBD2_REVOKE_BLOCK:
+			/*
+			 * Check revoke block crc in pass_scan, if csum verify
+			 * failed, check commit block time later.
+			 */
+			if (pass == PASS_SCAN &&
+			    !jbd2_descriptor_block_csum_verify(journal,
+							       bh->b_data)) {
+				jbd2_debug(1, "JBD2: invalid revoke block found in %lu\n",
+					  next_log_block);
+				need_check_commit_time = true;
+			}
+			/* If we aren't in the REVOKE pass, then we can
+			 * just skip over this block. */
+			if (pass != PASS_REVOKE) {
+				brelse(bh);
+				continue;
+			}
+
+			err = scan_revoke_records(journal, bh,
+						  next_commit_ID, info);
+			brelse(bh);
+			if (err)
+				goto failed;
+			continue;
+
+		default:
+			jbd2_debug(3, "Unrecognised magic %d, end of scan.\n",
+				  blocktype);
+			brelse(bh);
+			goto done;
+		}
+	}
+
+ done:
+	/*
+	 * We broke out of the log scan loop: either we came to the
+	 * known end of the log or we found an unexpected block in the
+	 * log.  If the latter happened, then we know that the "current"
+	 * transaction marks the end of the valid log.
+	 */
+
+	if (pass == PASS_SCAN) {
+		if (!info->end_transaction)
+			info->end_transaction = next_commit_ID;
+	} else {
+		/* It's really bad news if different passes end up at
+		 * different places (but possible due to IO errors). */
+		if (info->end_transaction != next_commit_ID) {
+			printk(KERN_ERR "JBD2: recovery pass %d ended at "
+				"transaction %u, expected %u\n",
+				pass, next_commit_ID, info->end_transaction);
+			if (!success)
+				success = -EIO;
+		}
+	}
+
+	if (jbd2_has_feature_fast_commit(journal) &&  pass != PASS_REVOKE) {
+		err = fc_do_one_pass(journal, info, pass);
+		if (err)
+			success = err;
+	}
+
+	if (block_error && success == 0)
+		success = -EIO;
+	return success;
+
+ failed:
+	return err;
+}
+
+/* Scan a revoke record, marking all blocks mentioned as revoked. */
+
+static int scan_revoke_records(journal_t *journal, struct buffer_head *bh,
+			       tid_t sequence, struct recovery_info *info)
+{
+	jbd2_journal_revoke_header_t *header;
+	int offset, max;
+	unsigned csum_size = 0;
+	__u32 rcount;
+	int record_len = 4;
+
+	header = (jbd2_journal_revoke_header_t *) bh->b_data;
+	offset = sizeof(jbd2_journal_revoke_header_t);
+	rcount = be32_to_cpu(header->r_count);
+
+	if (jbd2_journal_has_csum_v2or3(journal))
+		csum_size = sizeof(struct jbd2_journal_block_tail);
+	if (rcount > journal->j_blocksize - csum_size)
+		return -EINVAL;
+	max = rcount;
+
+	if (jbd2_has_feature_64bit(journal))
+		record_len = 8;
+
+	while (offset + record_len <= max) {
+		unsigned long long blocknr;
+		int err;
+
+		if (record_len == 4)
+			blocknr = be32_to_cpu(* ((__be32 *) (bh->b_data+offset)));
+		else
+			blocknr = be64_to_cpu(* ((__be64 *) (bh->b_data+offset)));
+		offset += record_len;
+		err = jbd2_journal_set_revoke(journal, blocknr, sequence);
+		if (err)
+			return err;
+		++info->nr_revokes;
+	}
+	return 0;
+}
diff --git a/fs/jbd2/revoke.c b/fs/jbd2/revoke.c
new file mode 100644
index 000000000..4556e4689
--- /dev/null
+++ b/fs/jbd2/revoke.c
@@ -0,0 +1,743 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * linux/fs/jbd2/revoke.c
+ *
+ * Written by Stephen C. Tweedie <sct@redhat.com>, 2000
+ *
+ * Copyright 2000 Red Hat corp --- All Rights Reserved
+ *
+ * Journal revoke routines for the generic filesystem journaling code;
+ * part of the ext2fs journaling system.
+ *
+ * Revoke is the mechanism used to prevent old log records for deleted
+ * metadata from being replayed on top of newer data using the same
+ * blocks.  The revoke mechanism is used in two separate places:
+ *
+ * + Commit: during commit we write the entire list of the current
+ *   transaction's revoked blocks to the journal
+ *
+ * + Recovery: during recovery we record the transaction ID of all
+ *   revoked blocks.  If there are multiple revoke records in the log
+ *   for a single block, only the last one counts, and if there is a log
+ *   entry for a block beyond the last revoke, then that log entry still
+ *   gets replayed.
+ *
+ * We can get interactions between revokes and new log data within a
+ * single transaction:
+ *
+ * Block is revoked and then journaled:
+ *   The desired end result is the journaling of the new block, so we
+ *   cancel the revoke before the transaction commits.
+ *
+ * Block is journaled and then revoked:
+ *   The revoke must take precedence over the write of the block, so we
+ *   need either to cancel the journal entry or to write the revoke
+ *   later in the log than the log block.  In this case, we choose the
+ *   latter: journaling a block cancels any revoke record for that block
+ *   in the current transaction, so any revoke for that block in the
+ *   transaction must have happened after the block was journaled and so
+ *   the revoke must take precedence.
+ *
+ * Block is revoked and then written as data:
+ *   The data write is allowed to succeed, but the revoke is _not_
+ *   cancelled.  We still need to prevent old log records from
+ *   overwriting the new data.  We don't even need to clear the revoke
+ *   bit here.
+ *
+ * We cache revoke status of a buffer in the current transaction in b_states
+ * bits.  As the name says, revokevalid flag indicates that the cached revoke
+ * status of a buffer is valid and we can rely on the cached status.
+ *
+ * Revoke information on buffers is a tri-state value:
+ *
+ * RevokeValid clear:	no cached revoke status, need to look it up
+ * RevokeValid set, Revoked clear:
+ *			buffer has not been revoked, and cancel_revoke
+ *			need do nothing.
+ * RevokeValid set, Revoked set:
+ *			buffer has been revoked.
+ *
+ * Locking rules:
+ * We keep two hash tables of revoke records. One hashtable belongs to the
+ * running transaction (is pointed to by journal->j_revoke), the other one
+ * belongs to the committing transaction. Accesses to the second hash table
+ * happen only from the kjournald and no other thread touches this table.  Also
+ * journal_switch_revoke_table() which switches which hashtable belongs to the
+ * running and which to the committing transaction is called only from
+ * kjournald. Therefore we need no locks when accessing the hashtable belonging
+ * to the committing transaction.
+ *
+ * All users operating on the hash table belonging to the running transaction
+ * have a handle to the transaction. Therefore they are safe from kjournald
+ * switching hash tables under them. For operations on the lists of entries in
+ * the hash table j_revoke_lock is used.
+ *
+ * Finally, also replay code uses the hash tables but at this moment no one else
+ * can touch them (filesystem isn't mounted yet) and hence no locking is
+ * needed.
+ */
+
+#ifndef __KERNEL__
+#include "jfs_user.h"
+#else
+#include <linux/time.h>
+#include <linux/fs.h>
+#include <linux/jbd2.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/bio.h>
+#include <linux/log2.h>
+#include <linux/hash.h>
+#endif
+
+static struct kmem_cache *jbd2_revoke_record_cache;
+static struct kmem_cache *jbd2_revoke_table_cache;
+
+/* Each revoke record represents one single revoked block.  During
+   journal replay, this involves recording the transaction ID of the
+   last transaction to revoke this block. */
+
+struct jbd2_revoke_record_s
+{
+	struct list_head  hash;
+	tid_t		  sequence;	/* Used for recovery only */
+	unsigned long long	  blocknr;
+};
+
+
+/* The revoke table is just a simple hash table of revoke records. */
+struct jbd2_revoke_table_s
+{
+	/* It is conceivable that we might want a larger hash table
+	 * for recovery.  Must be a power of two. */
+	int		  hash_size;
+	int		  hash_shift;
+	struct list_head *hash_table;
+};
+
+
+#ifdef __KERNEL__
+static void write_one_revoke_record(transaction_t *,
+				    struct list_head *,
+				    struct buffer_head **, int *,
+				    struct jbd2_revoke_record_s *);
+static void flush_descriptor(journal_t *, struct buffer_head *, int);
+#endif
+
+/* Utility functions to maintain the revoke table */
+
+static inline int hash(journal_t *journal, unsigned long long block)
+{
+	return hash_64(block, journal->j_revoke->hash_shift);
+}
+
+static int insert_revoke_hash(journal_t *journal, unsigned long long blocknr,
+			      tid_t seq)
+{
+	struct list_head *hash_list;
+	struct jbd2_revoke_record_s *record;
+	gfp_t gfp_mask = GFP_NOFS;
+
+	if (journal_oom_retry)
+		gfp_mask |= __GFP_NOFAIL;
+	record = kmem_cache_alloc(jbd2_revoke_record_cache, gfp_mask);
+	if (!record)
+		return -ENOMEM;
+
+	record->sequence = seq;
+	record->blocknr = blocknr;
+	hash_list = &journal->j_revoke->hash_table[hash(journal, blocknr)];
+	spin_lock(&journal->j_revoke_lock);
+	list_add(&record->hash, hash_list);
+	spin_unlock(&journal->j_revoke_lock);
+	return 0;
+}
+
+/* Find a revoke record in the journal's hash table. */
+
+static struct jbd2_revoke_record_s *find_revoke_record(journal_t *journal,
+						      unsigned long long blocknr)
+{
+	struct list_head *hash_list;
+	struct jbd2_revoke_record_s *record;
+
+	hash_list = &journal->j_revoke->hash_table[hash(journal, blocknr)];
+
+	spin_lock(&journal->j_revoke_lock);
+	record = (struct jbd2_revoke_record_s *) hash_list->next;
+	while (&(record->hash) != hash_list) {
+		if (record->blocknr == blocknr) {
+			spin_unlock(&journal->j_revoke_lock);
+			return record;
+		}
+		record = (struct jbd2_revoke_record_s *) record->hash.next;
+	}
+	spin_unlock(&journal->j_revoke_lock);
+	return NULL;
+}
+
+void jbd2_journal_destroy_revoke_record_cache(void)
+{
+	kmem_cache_destroy(jbd2_revoke_record_cache);
+	jbd2_revoke_record_cache = NULL;
+}
+
+void jbd2_journal_destroy_revoke_table_cache(void)
+{
+	kmem_cache_destroy(jbd2_revoke_table_cache);
+	jbd2_revoke_table_cache = NULL;
+}
+
+int __init jbd2_journal_init_revoke_record_cache(void)
+{
+	J_ASSERT(!jbd2_revoke_record_cache);
+	jbd2_revoke_record_cache = KMEM_CACHE(jbd2_revoke_record_s,
+					SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY);
+
+	if (!jbd2_revoke_record_cache) {
+		pr_emerg("JBD2: failed to create revoke_record cache\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+int __init jbd2_journal_init_revoke_table_cache(void)
+{
+	J_ASSERT(!jbd2_revoke_table_cache);
+	jbd2_revoke_table_cache = KMEM_CACHE(jbd2_revoke_table_s,
+					     SLAB_TEMPORARY);
+	if (!jbd2_revoke_table_cache) {
+		pr_emerg("JBD2: failed to create revoke_table cache\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static struct jbd2_revoke_table_s *jbd2_journal_init_revoke_table(int hash_size)
+{
+	int shift = 0;
+	int tmp = hash_size;
+	struct jbd2_revoke_table_s *table;
+
+	table = kmem_cache_alloc(jbd2_revoke_table_cache, GFP_KERNEL);
+	if (!table)
+		goto out;
+
+	while((tmp >>= 1UL) != 0UL)
+		shift++;
+
+	table->hash_size = hash_size;
+	table->hash_shift = shift;
+	table->hash_table =
+		kmalloc_array(hash_size, sizeof(struct list_head), GFP_KERNEL);
+	if (!table->hash_table) {
+		kmem_cache_free(jbd2_revoke_table_cache, table);
+		table = NULL;
+		goto out;
+	}
+
+	for (tmp = 0; tmp < hash_size; tmp++)
+		INIT_LIST_HEAD(&table->hash_table[tmp]);
+
+out:
+	return table;
+}
+
+static void jbd2_journal_destroy_revoke_table(struct jbd2_revoke_table_s *table)
+{
+	int i;
+	struct list_head *hash_list;
+
+	for (i = 0; i < table->hash_size; i++) {
+		hash_list = &table->hash_table[i];
+		J_ASSERT(list_empty(hash_list));
+	}
+
+	kfree(table->hash_table);
+	kmem_cache_free(jbd2_revoke_table_cache, table);
+}
+
+/* Initialise the revoke table for a given journal to a given size. */
+int jbd2_journal_init_revoke(journal_t *journal, int hash_size)
+{
+	J_ASSERT(journal->j_revoke_table[0] == NULL);
+	J_ASSERT(is_power_of_2(hash_size));
+
+	journal->j_revoke_table[0] = jbd2_journal_init_revoke_table(hash_size);
+	if (!journal->j_revoke_table[0])
+		goto fail0;
+
+	journal->j_revoke_table[1] = jbd2_journal_init_revoke_table(hash_size);
+	if (!journal->j_revoke_table[1])
+		goto fail1;
+
+	journal->j_revoke = journal->j_revoke_table[1];
+
+	spin_lock_init(&journal->j_revoke_lock);
+
+	return 0;
+
+fail1:
+	jbd2_journal_destroy_revoke_table(journal->j_revoke_table[0]);
+	journal->j_revoke_table[0] = NULL;
+fail0:
+	return -ENOMEM;
+}
+
+/* Destroy a journal's revoke table.  The table must already be empty! */
+void jbd2_journal_destroy_revoke(journal_t *journal)
+{
+	journal->j_revoke = NULL;
+	if (journal->j_revoke_table[0])
+		jbd2_journal_destroy_revoke_table(journal->j_revoke_table[0]);
+	if (journal->j_revoke_table[1])
+		jbd2_journal_destroy_revoke_table(journal->j_revoke_table[1]);
+}
+
+
+#ifdef __KERNEL__
+
+/*
+ * jbd2_journal_revoke: revoke a given buffer_head from the journal.  This
+ * prevents the block from being replayed during recovery if we take a
+ * crash after this current transaction commits.  Any subsequent
+ * metadata writes of the buffer in this transaction cancel the
+ * revoke.
+ *
+ * Note that this call may block --- it is up to the caller to make
+ * sure that there are no further calls to journal_write_metadata
+ * before the revoke is complete.  In ext3, this implies calling the
+ * revoke before clearing the block bitmap when we are deleting
+ * metadata.
+ *
+ * Revoke performs a jbd2_journal_forget on any buffer_head passed in as a
+ * parameter, but does _not_ forget the buffer_head if the bh was only
+ * found implicitly.
+ *
+ * bh_in may not be a journalled buffer - it may have come off
+ * the hash tables without an attached journal_head.
+ *
+ * If bh_in is non-zero, jbd2_journal_revoke() will decrement its b_count
+ * by one.
+ */
+
+int jbd2_journal_revoke(handle_t *handle, unsigned long long blocknr,
+		   struct buffer_head *bh_in)
+{
+	struct buffer_head *bh = NULL;
+	journal_t *journal;
+	struct block_device *bdev;
+	int err;
+
+	might_sleep();
+	if (bh_in)
+		BUFFER_TRACE(bh_in, "enter");
+
+	journal = handle->h_transaction->t_journal;
+	if (!jbd2_journal_set_features(journal, 0, 0, JBD2_FEATURE_INCOMPAT_REVOKE)){
+		J_ASSERT (!"Cannot set revoke feature!");
+		return -EINVAL;
+	}
+
+	bdev = journal->j_fs_dev;
+	bh = bh_in;
+
+	if (!bh) {
+		bh = __find_get_block(bdev, blocknr, journal->j_blocksize);
+		if (bh)
+			BUFFER_TRACE(bh, "found on hash");
+	}
+#ifdef JBD2_EXPENSIVE_CHECKING
+	else {
+		struct buffer_head *bh2;
+
+		/* If there is a different buffer_head lying around in
+		 * memory anywhere... */
+		bh2 = __find_get_block(bdev, blocknr, journal->j_blocksize);
+		if (bh2) {
+			/* ... and it has RevokeValid status... */
+			if (bh2 != bh && buffer_revokevalid(bh2))
+				/* ...then it better be revoked too,
+				 * since it's illegal to create a revoke
+				 * record against a buffer_head which is
+				 * not marked revoked --- that would
+				 * risk missing a subsequent revoke
+				 * cancel. */
+				J_ASSERT_BH(bh2, buffer_revoked(bh2));
+			put_bh(bh2);
+		}
+	}
+#endif
+
+	if (WARN_ON_ONCE(handle->h_revoke_credits <= 0)) {
+		if (!bh_in)
+			brelse(bh);
+		return -EIO;
+	}
+	/* We really ought not ever to revoke twice in a row without
+           first having the revoke cancelled: it's illegal to free a
+           block twice without allocating it in between! */
+	if (bh) {
+		if (!J_EXPECT_BH(bh, !buffer_revoked(bh),
+				 "inconsistent data on disk")) {
+			if (!bh_in)
+				brelse(bh);
+			return -EIO;
+		}
+		set_buffer_revoked(bh);
+		set_buffer_revokevalid(bh);
+		if (bh_in) {
+			BUFFER_TRACE(bh_in, "call jbd2_journal_forget");
+			jbd2_journal_forget(handle, bh_in);
+		} else {
+			BUFFER_TRACE(bh, "call brelse");
+			__brelse(bh);
+		}
+	}
+	handle->h_revoke_credits--;
+
+	jbd2_debug(2, "insert revoke for block %llu, bh_in=%p\n",blocknr, bh_in);
+	err = insert_revoke_hash(journal, blocknr,
+				handle->h_transaction->t_tid);
+	BUFFER_TRACE(bh_in, "exit");
+	return err;
+}
+
+/*
+ * Cancel an outstanding revoke.  For use only internally by the
+ * journaling code (called from jbd2_journal_get_write_access).
+ *
+ * We trust buffer_revoked() on the buffer if the buffer is already
+ * being journaled: if there is no revoke pending on the buffer, then we
+ * don't do anything here.
+ *
+ * This would break if it were possible for a buffer to be revoked and
+ * discarded, and then reallocated within the same transaction.  In such
+ * a case we would have lost the revoked bit, but when we arrived here
+ * the second time we would still have a pending revoke to cancel.  So,
+ * do not trust the Revoked bit on buffers unless RevokeValid is also
+ * set.
+ */
+int jbd2_journal_cancel_revoke(handle_t *handle, struct journal_head *jh)
+{
+	struct jbd2_revoke_record_s *record;
+	journal_t *journal = handle->h_transaction->t_journal;
+	int need_cancel;
+	int did_revoke = 0;	/* akpm: debug */
+	struct buffer_head *bh = jh2bh(jh);
+
+	jbd2_debug(4, "journal_head %p, cancelling revoke\n", jh);
+
+	/* Is the existing Revoke bit valid?  If so, we trust it, and
+	 * only perform the full cancel if the revoke bit is set.  If
+	 * not, we can't trust the revoke bit, and we need to do the
+	 * full search for a revoke record. */
+	if (test_set_buffer_revokevalid(bh)) {
+		need_cancel = test_clear_buffer_revoked(bh);
+	} else {
+		need_cancel = 1;
+		clear_buffer_revoked(bh);
+	}
+
+	if (need_cancel) {
+		record = find_revoke_record(journal, bh->b_blocknr);
+		if (record) {
+			jbd2_debug(4, "cancelled existing revoke on "
+				  "blocknr %llu\n", (unsigned long long)bh->b_blocknr);
+			spin_lock(&journal->j_revoke_lock);
+			list_del(&record->hash);
+			spin_unlock(&journal->j_revoke_lock);
+			kmem_cache_free(jbd2_revoke_record_cache, record);
+			did_revoke = 1;
+		}
+	}
+
+#ifdef JBD2_EXPENSIVE_CHECKING
+	/* There better not be one left behind by now! */
+	record = find_revoke_record(journal, bh->b_blocknr);
+	J_ASSERT_JH(jh, record == NULL);
+#endif
+
+	/* Finally, have we just cleared revoke on an unhashed
+	 * buffer_head?  If so, we'd better make sure we clear the
+	 * revoked status on any hashed alias too, otherwise the revoke
+	 * state machine will get very upset later on. */
+	if (need_cancel) {
+		struct buffer_head *bh2;
+		bh2 = __find_get_block(bh->b_bdev, bh->b_blocknr, bh->b_size);
+		if (bh2) {
+			if (bh2 != bh)
+				clear_buffer_revoked(bh2);
+			__brelse(bh2);
+		}
+	}
+	return did_revoke;
+}
+
+/*
+ * journal_clear_revoked_flag clears revoked flag of buffers in
+ * revoke table to reflect there is no revoked buffers in the next
+ * transaction which is going to be started.
+ */
+void jbd2_clear_buffer_revoked_flags(journal_t *journal)
+{
+	struct jbd2_revoke_table_s *revoke = journal->j_revoke;
+	int i = 0;
+
+	for (i = 0; i < revoke->hash_size; i++) {
+		struct list_head *hash_list;
+		struct list_head *list_entry;
+		hash_list = &revoke->hash_table[i];
+
+		list_for_each(list_entry, hash_list) {
+			struct jbd2_revoke_record_s *record;
+			struct buffer_head *bh;
+			record = (struct jbd2_revoke_record_s *)list_entry;
+			bh = __find_get_block(journal->j_fs_dev,
+					      record->blocknr,
+					      journal->j_blocksize);
+			if (bh) {
+				clear_buffer_revoked(bh);
+				__brelse(bh);
+			}
+		}
+	}
+}
+
+/* journal_switch_revoke table select j_revoke for next transaction
+ * we do not want to suspend any processing until all revokes are
+ * written -bzzz
+ */
+void jbd2_journal_switch_revoke_table(journal_t *journal)
+{
+	int i;
+
+	if (journal->j_revoke == journal->j_revoke_table[0])
+		journal->j_revoke = journal->j_revoke_table[1];
+	else
+		journal->j_revoke = journal->j_revoke_table[0];
+
+	for (i = 0; i < journal->j_revoke->hash_size; i++)
+		INIT_LIST_HEAD(&journal->j_revoke->hash_table[i]);
+}
+
+/*
+ * Write revoke records to the journal for all entries in the current
+ * revoke hash, deleting the entries as we go.
+ */
+void jbd2_journal_write_revoke_records(transaction_t *transaction,
+				       struct list_head *log_bufs)
+{
+	journal_t *journal = transaction->t_journal;
+	struct buffer_head *descriptor;
+	struct jbd2_revoke_record_s *record;
+	struct jbd2_revoke_table_s *revoke;
+	struct list_head *hash_list;
+	int i, offset, count;
+
+	descriptor = NULL;
+	offset = 0;
+	count = 0;
+
+	/* select revoke table for committing transaction */
+	revoke = journal->j_revoke == journal->j_revoke_table[0] ?
+		journal->j_revoke_table[1] : journal->j_revoke_table[0];
+
+	for (i = 0; i < revoke->hash_size; i++) {
+		hash_list = &revoke->hash_table[i];
+
+		while (!list_empty(hash_list)) {
+			record = (struct jbd2_revoke_record_s *)
+				hash_list->next;
+			write_one_revoke_record(transaction, log_bufs,
+						&descriptor, &offset, record);
+			count++;
+			list_del(&record->hash);
+			kmem_cache_free(jbd2_revoke_record_cache, record);
+		}
+	}
+	if (descriptor)
+		flush_descriptor(journal, descriptor, offset);
+	jbd2_debug(1, "Wrote %d revoke records\n", count);
+}
+
+/*
+ * Write out one revoke record.  We need to create a new descriptor
+ * block if the old one is full or if we have not already created one.
+ */
+
+static void write_one_revoke_record(transaction_t *transaction,
+				    struct list_head *log_bufs,
+				    struct buffer_head **descriptorp,
+				    int *offsetp,
+				    struct jbd2_revoke_record_s *record)
+{
+	journal_t *journal = transaction->t_journal;
+	int csum_size = 0;
+	struct buffer_head *descriptor;
+	int sz, offset;
+
+	/* If we are already aborting, this all becomes a noop.  We
+           still need to go round the loop in
+           jbd2_journal_write_revoke_records in order to free all of the
+           revoke records: only the IO to the journal is omitted. */
+	if (is_journal_aborted(journal))
+		return;
+
+	descriptor = *descriptorp;
+	offset = *offsetp;
+
+	/* Do we need to leave space at the end for a checksum? */
+	if (jbd2_journal_has_csum_v2or3(journal))
+		csum_size = sizeof(struct jbd2_journal_block_tail);
+
+	if (jbd2_has_feature_64bit(journal))
+		sz = 8;
+	else
+		sz = 4;
+
+	/* Make sure we have a descriptor with space left for the record */
+	if (descriptor) {
+		if (offset + sz > journal->j_blocksize - csum_size) {
+			flush_descriptor(journal, descriptor, offset);
+			descriptor = NULL;
+		}
+	}
+
+	if (!descriptor) {
+		descriptor = jbd2_journal_get_descriptor_buffer(transaction,
+							JBD2_REVOKE_BLOCK);
+		if (!descriptor)
+			return;
+
+		/* Record it so that we can wait for IO completion later */
+		BUFFER_TRACE(descriptor, "file in log_bufs");
+		jbd2_file_log_bh(log_bufs, descriptor);
+
+		offset = sizeof(jbd2_journal_revoke_header_t);
+		*descriptorp = descriptor;
+	}
+
+	if (jbd2_has_feature_64bit(journal))
+		* ((__be64 *)(&descriptor->b_data[offset])) =
+			cpu_to_be64(record->blocknr);
+	else
+		* ((__be32 *)(&descriptor->b_data[offset])) =
+			cpu_to_be32(record->blocknr);
+	offset += sz;
+
+	*offsetp = offset;
+}
+
+/*
+ * Flush a revoke descriptor out to the journal.  If we are aborting,
+ * this is a noop; otherwise we are generating a buffer which needs to
+ * be waited for during commit, so it has to go onto the appropriate
+ * journal buffer list.
+ */
+
+static void flush_descriptor(journal_t *journal,
+			     struct buffer_head *descriptor,
+			     int offset)
+{
+	jbd2_journal_revoke_header_t *header;
+
+	if (is_journal_aborted(journal))
+		return;
+
+	header = (jbd2_journal_revoke_header_t *)descriptor->b_data;
+	header->r_count = cpu_to_be32(offset);
+	jbd2_descriptor_block_csum_set(journal, descriptor);
+
+	set_buffer_jwrite(descriptor);
+	BUFFER_TRACE(descriptor, "write");
+	set_buffer_dirty(descriptor);
+	write_dirty_buffer(descriptor, REQ_SYNC);
+}
+#endif
+
+/*
+ * Revoke support for recovery.
+ *
+ * Recovery needs to be able to:
+ *
+ *  record all revoke records, including the tid of the latest instance
+ *  of each revoke in the journal
+ *
+ *  check whether a given block in a given transaction should be replayed
+ *  (ie. has not been revoked by a revoke record in that or a subsequent
+ *  transaction)
+ *
+ *  empty the revoke table after recovery.
+ */
+
+/*
+ * First, setting revoke records.  We create a new revoke record for
+ * every block ever revoked in the log as we scan it for recovery, and
+ * we update the existing records if we find multiple revokes for a
+ * single block.
+ */
+
+int jbd2_journal_set_revoke(journal_t *journal,
+		       unsigned long long blocknr,
+		       tid_t sequence)
+{
+	struct jbd2_revoke_record_s *record;
+
+	record = find_revoke_record(journal, blocknr);
+	if (record) {
+		/* If we have multiple occurrences, only record the
+		 * latest sequence number in the hashed record */
+		if (tid_gt(sequence, record->sequence))
+			record->sequence = sequence;
+		return 0;
+	}
+	return insert_revoke_hash(journal, blocknr, sequence);
+}
+
+/*
+ * Test revoke records.  For a given block referenced in the log, has
+ * that block been revoked?  A revoke record with a given transaction
+ * sequence number revokes all blocks in that transaction and earlier
+ * ones, but later transactions still need replayed.
+ */
+
+int jbd2_journal_test_revoke(journal_t *journal,
+			unsigned long long blocknr,
+			tid_t sequence)
+{
+	struct jbd2_revoke_record_s *record;
+
+	record = find_revoke_record(journal, blocknr);
+	if (!record)
+		return 0;
+	if (tid_gt(sequence, record->sequence))
+		return 0;
+	return 1;
+}
+
+/*
+ * Finally, once recovery is over, we need to clear the revoke table so
+ * that it can be reused by the running filesystem.
+ */
+
+void jbd2_journal_clear_revoke(journal_t *journal)
+{
+	int i;
+	struct list_head *hash_list;
+	struct jbd2_revoke_record_s *record;
+	struct jbd2_revoke_table_s *revoke;
+
+	revoke = journal->j_revoke;
+
+	for (i = 0; i < revoke->hash_size; i++) {
+		hash_list = &revoke->hash_table[i];
+		while (!list_empty(hash_list)) {
+			record = (struct jbd2_revoke_record_s*) hash_list->next;
+			list_del(&record->hash);
+			kmem_cache_free(jbd2_revoke_record_cache, record);
+		}
+	}
+}
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
new file mode 100644
index 000000000..6ef502294
--- /dev/null
+++ b/fs/jbd2/transaction.c
@@ -0,0 +1,2786 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * linux/fs/jbd2/transaction.c
+ *
+ * Written by Stephen C. Tweedie <sct@redhat.com>, 1998
+ *
+ * Copyright 1998 Red Hat corp --- All Rights Reserved
+ *
+ * Generic filesystem transaction handling code; part of the ext2fs
+ * journaling system.
+ *
+ * This file manages transactions (compound commits managed by the
+ * journaling code) and handles (individual atomic operations by the
+ * filesystem).
+ */
+
+#include <linux/time.h>
+#include <linux/fs.h>
+#include <linux/jbd2.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/hrtimer.h>
+#include <linux/backing-dev.h>
+#include <linux/bug.h>
+#include <linux/module.h>
+#include <linux/sched/mm.h>
+
+#include <trace/events/jbd2.h>
+
+static void __jbd2_journal_temp_unlink_buffer(struct journal_head *jh);
+static void __jbd2_journal_unfile_buffer(struct journal_head *jh);
+
+static struct kmem_cache *transaction_cache;
+int __init jbd2_journal_init_transaction_cache(void)
+{
+	J_ASSERT(!transaction_cache);
+	transaction_cache = kmem_cache_create("jbd2_transaction_s",
+					sizeof(transaction_t),
+					0,
+					SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY,
+					NULL);
+	if (!transaction_cache) {
+		pr_emerg("JBD2: failed to create transaction cache\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+void jbd2_journal_destroy_transaction_cache(void)
+{
+	kmem_cache_destroy(transaction_cache);
+	transaction_cache = NULL;
+}
+
+void jbd2_journal_free_transaction(transaction_t *transaction)
+{
+	if (unlikely(ZERO_OR_NULL_PTR(transaction)))
+		return;
+	kmem_cache_free(transaction_cache, transaction);
+}
+
+/*
+ * Base amount of descriptor blocks we reserve for each transaction.
+ */
+static int jbd2_descriptor_blocks_per_trans(journal_t *journal)
+{
+	int tag_space = journal->j_blocksize - sizeof(journal_header_t);
+	int tags_per_block;
+
+	/* Subtract UUID */
+	tag_space -= 16;
+	if (jbd2_journal_has_csum_v2or3(journal))
+		tag_space -= sizeof(struct jbd2_journal_block_tail);
+	/* Commit code leaves a slack space of 16 bytes at the end of block */
+	tags_per_block = (tag_space - 16) / journal_tag_bytes(journal);
+	/*
+	 * Revoke descriptors are accounted separately so we need to reserve
+	 * space for commit block and normal transaction descriptor blocks.
+	 */
+	return 1 + DIV_ROUND_UP(journal->j_max_transaction_buffers,
+				tags_per_block);
+}
+
+/*
+ * jbd2_get_transaction: obtain a new transaction_t object.
+ *
+ * Simply initialise a new transaction. Initialize it in
+ * RUNNING state and add it to the current journal (which should not
+ * have an existing running transaction: we only make a new transaction
+ * once we have started to commit the old one).
+ *
+ * Preconditions:
+ *	The journal MUST be locked.  We don't perform atomic mallocs on the
+ *	new transaction	and we can't block without protecting against other
+ *	processes trying to touch the journal while it is in transition.
+ *
+ */
+
+static void jbd2_get_transaction(journal_t *journal,
+				transaction_t *transaction)
+{
+	transaction->t_journal = journal;
+	transaction->t_state = T_RUNNING;
+	transaction->t_start_time = ktime_get();
+	transaction->t_tid = journal->j_transaction_sequence++;
+	transaction->t_expires = jiffies + journal->j_commit_interval;
+	atomic_set(&transaction->t_updates, 0);
+	atomic_set(&transaction->t_outstanding_credits,
+		   jbd2_descriptor_blocks_per_trans(journal) +
+		   atomic_read(&journal->j_reserved_credits));
+	atomic_set(&transaction->t_outstanding_revokes, 0);
+	atomic_set(&transaction->t_handle_count, 0);
+	INIT_LIST_HEAD(&transaction->t_inode_list);
+	INIT_LIST_HEAD(&transaction->t_private_list);
+
+	/* Set up the commit timer for the new transaction. */
+	journal->j_commit_timer.expires = round_jiffies_up(transaction->t_expires);
+	add_timer(&journal->j_commit_timer);
+
+	J_ASSERT(journal->j_running_transaction == NULL);
+	journal->j_running_transaction = transaction;
+	transaction->t_max_wait = 0;
+	transaction->t_start = jiffies;
+	transaction->t_requested = 0;
+}
+
+/*
+ * Handle management.
+ *
+ * A handle_t is an object which represents a single atomic update to a
+ * filesystem, and which tracks all of the modifications which form part
+ * of that one update.
+ */
+
+/*
+ * Update transaction's maximum wait time, if debugging is enabled.
+ *
+ * t_max_wait is carefully updated here with use of atomic compare exchange.
+ * Note that there could be multiplre threads trying to do this simultaneously
+ * hence using cmpxchg to avoid any use of locks in this case.
+ * With this t_max_wait can be updated w/o enabling jbd2_journal_enable_debug.
+ */
+static inline void update_t_max_wait(transaction_t *transaction,
+				     unsigned long ts)
+{
+	unsigned long oldts, newts;
+
+	if (time_after(transaction->t_start, ts)) {
+		newts = jbd2_time_diff(ts, transaction->t_start);
+		oldts = READ_ONCE(transaction->t_max_wait);
+		while (oldts < newts)
+			oldts = cmpxchg(&transaction->t_max_wait, oldts, newts);
+	}
+}
+
+/*
+ * Wait until running transaction passes to T_FLUSH state and new transaction
+ * can thus be started. Also starts the commit if needed. The function expects
+ * running transaction to exist and releases j_state_lock.
+ */
+static void wait_transaction_locked(journal_t *journal)
+	__releases(journal->j_state_lock)
+{
+	DEFINE_WAIT(wait);
+	int need_to_start;
+	tid_t tid = journal->j_running_transaction->t_tid;
+
+	prepare_to_wait_exclusive(&journal->j_wait_transaction_locked, &wait,
+			TASK_UNINTERRUPTIBLE);
+	need_to_start = !tid_geq(journal->j_commit_request, tid);
+	read_unlock(&journal->j_state_lock);
+	if (need_to_start)
+		jbd2_log_start_commit(journal, tid);
+	jbd2_might_wait_for_commit(journal);
+	schedule();
+	finish_wait(&journal->j_wait_transaction_locked, &wait);
+}
+
+/*
+ * Wait until running transaction transitions from T_SWITCH to T_FLUSH
+ * state and new transaction can thus be started. The function releases
+ * j_state_lock.
+ */
+static void wait_transaction_switching(journal_t *journal)
+	__releases(journal->j_state_lock)
+{
+	DEFINE_WAIT(wait);
+
+	if (WARN_ON(!journal->j_running_transaction ||
+		    journal->j_running_transaction->t_state != T_SWITCH)) {
+		read_unlock(&journal->j_state_lock);
+		return;
+	}
+	prepare_to_wait_exclusive(&journal->j_wait_transaction_locked, &wait,
+			TASK_UNINTERRUPTIBLE);
+	read_unlock(&journal->j_state_lock);
+	/*
+	 * We don't call jbd2_might_wait_for_commit() here as there's no
+	 * waiting for outstanding handles happening anymore in T_SWITCH state
+	 * and handling of reserved handles actually relies on that for
+	 * correctness.
+	 */
+	schedule();
+	finish_wait(&journal->j_wait_transaction_locked, &wait);
+}
+
+static void sub_reserved_credits(journal_t *journal, int blocks)
+{
+	atomic_sub(blocks, &journal->j_reserved_credits);
+	wake_up(&journal->j_wait_reserved);
+}
+
+/*
+ * Wait until we can add credits for handle to the running transaction.  Called
+ * with j_state_lock held for reading. Returns 0 if handle joined the running
+ * transaction. Returns 1 if we had to wait, j_state_lock is dropped, and
+ * caller must retry.
+ *
+ * Note: because j_state_lock may be dropped depending on the return
+ * value, we need to fake out sparse so ti doesn't complain about a
+ * locking imbalance.  Callers of add_transaction_credits will need to
+ * make a similar accomodation.
+ */
+static int add_transaction_credits(journal_t *journal, int blocks,
+				   int rsv_blocks)
+__must_hold(&journal->j_state_lock)
+{
+	transaction_t *t = journal->j_running_transaction;
+	int needed;
+	int total = blocks + rsv_blocks;
+
+	/*
+	 * If the current transaction is locked down for commit, wait
+	 * for the lock to be released.
+	 */
+	if (t->t_state != T_RUNNING) {
+		WARN_ON_ONCE(t->t_state >= T_FLUSH);
+		wait_transaction_locked(journal);
+		__acquire(&journal->j_state_lock); /* fake out sparse */
+		return 1;
+	}
+
+	/*
+	 * If there is not enough space left in the log to write all
+	 * potential buffers requested by this operation, we need to
+	 * stall pending a log checkpoint to free some more log space.
+	 */
+	needed = atomic_add_return(total, &t->t_outstanding_credits);
+	if (needed > journal->j_max_transaction_buffers) {
+		/*
+		 * If the current transaction is already too large,
+		 * then start to commit it: we can then go back and
+		 * attach this handle to a new transaction.
+		 */
+		atomic_sub(total, &t->t_outstanding_credits);
+
+		/*
+		 * Is the number of reserved credits in the current transaction too
+		 * big to fit this handle? Wait until reserved credits are freed.
+		 */
+		if (atomic_read(&journal->j_reserved_credits) + total >
+		    journal->j_max_transaction_buffers) {
+			read_unlock(&journal->j_state_lock);
+			jbd2_might_wait_for_commit(journal);
+			wait_event(journal->j_wait_reserved,
+				   atomic_read(&journal->j_reserved_credits) + total <=
+				   journal->j_max_transaction_buffers);
+			__acquire(&journal->j_state_lock); /* fake out sparse */
+			return 1;
+		}
+
+		wait_transaction_locked(journal);
+		__acquire(&journal->j_state_lock); /* fake out sparse */
+		return 1;
+	}
+
+	/*
+	 * The commit code assumes that it can get enough log space
+	 * without forcing a checkpoint.  This is *critical* for
+	 * correctness: a checkpoint of a buffer which is also
+	 * associated with a committing transaction creates a deadlock,
+	 * so commit simply cannot force through checkpoints.
+	 *
+	 * We must therefore ensure the necessary space in the journal
+	 * *before* starting to dirty potentially checkpointed buffers
+	 * in the new transaction.
+	 */
+	if (jbd2_log_space_left(journal) < journal->j_max_transaction_buffers) {
+		atomic_sub(total, &t->t_outstanding_credits);
+		read_unlock(&journal->j_state_lock);
+		jbd2_might_wait_for_commit(journal);
+		write_lock(&journal->j_state_lock);
+		if (jbd2_log_space_left(journal) <
+					journal->j_max_transaction_buffers)
+			__jbd2_log_wait_for_space(journal);
+		write_unlock(&journal->j_state_lock);
+		__acquire(&journal->j_state_lock); /* fake out sparse */
+		return 1;
+	}
+
+	/* No reservation? We are done... */
+	if (!rsv_blocks)
+		return 0;
+
+	needed = atomic_add_return(rsv_blocks, &journal->j_reserved_credits);
+	/* We allow at most half of a transaction to be reserved */
+	if (needed > journal->j_max_transaction_buffers / 2) {
+		sub_reserved_credits(journal, rsv_blocks);
+		atomic_sub(total, &t->t_outstanding_credits);
+		read_unlock(&journal->j_state_lock);
+		jbd2_might_wait_for_commit(journal);
+		wait_event(journal->j_wait_reserved,
+			 atomic_read(&journal->j_reserved_credits) + rsv_blocks
+			 <= journal->j_max_transaction_buffers / 2);
+		__acquire(&journal->j_state_lock); /* fake out sparse */
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * start_this_handle: Given a handle, deal with any locking or stalling
+ * needed to make sure that there is enough journal space for the handle
+ * to begin.  Attach the handle to a transaction and set up the
+ * transaction's buffer credits.
+ */
+
+static int start_this_handle(journal_t *journal, handle_t *handle,
+			     gfp_t gfp_mask)
+{
+	transaction_t	*transaction, *new_transaction = NULL;
+	int		blocks = handle->h_total_credits;
+	int		rsv_blocks = 0;
+	unsigned long ts = jiffies;
+
+	if (handle->h_rsv_handle)
+		rsv_blocks = handle->h_rsv_handle->h_total_credits;
+
+	/*
+	 * Limit the number of reserved credits to 1/2 of maximum transaction
+	 * size and limit the number of total credits to not exceed maximum
+	 * transaction size per operation.
+	 */
+	if ((rsv_blocks > journal->j_max_transaction_buffers / 2) ||
+	    (rsv_blocks + blocks > journal->j_max_transaction_buffers)) {
+		printk(KERN_ERR "JBD2: %s wants too many credits "
+		       "credits:%d rsv_credits:%d max:%d\n",
+		       current->comm, blocks, rsv_blocks,
+		       journal->j_max_transaction_buffers);
+		WARN_ON(1);
+		return -ENOSPC;
+	}
+
+alloc_transaction:
+	/*
+	 * This check is racy but it is just an optimization of allocating new
+	 * transaction early if there are high chances we'll need it. If we
+	 * guess wrong, we'll retry or free unused transaction.
+	 */
+	if (!data_race(journal->j_running_transaction)) {
+		/*
+		 * If __GFP_FS is not present, then we may be being called from
+		 * inside the fs writeback layer, so we MUST NOT fail.
+		 */
+		if ((gfp_mask & __GFP_FS) == 0)
+			gfp_mask |= __GFP_NOFAIL;
+		new_transaction = kmem_cache_zalloc(transaction_cache,
+						    gfp_mask);
+		if (!new_transaction)
+			return -ENOMEM;
+	}
+
+	jbd2_debug(3, "New handle %p going live.\n", handle);
+
+	/*
+	 * We need to hold j_state_lock until t_updates has been incremented,
+	 * for proper journal barrier handling
+	 */
+repeat:
+	read_lock(&journal->j_state_lock);
+	BUG_ON(journal->j_flags & JBD2_UNMOUNT);
+	if (is_journal_aborted(journal) ||
+	    (journal->j_errno != 0 && !(journal->j_flags & JBD2_ACK_ERR))) {
+		read_unlock(&journal->j_state_lock);
+		jbd2_journal_free_transaction(new_transaction);
+		return -EROFS;
+	}
+
+	/*
+	 * Wait on the journal's transaction barrier if necessary. Specifically
+	 * we allow reserved handles to proceed because otherwise commit could
+	 * deadlock on page writeback not being able to complete.
+	 */
+	if (!handle->h_reserved && journal->j_barrier_count) {
+		read_unlock(&journal->j_state_lock);
+		wait_event(journal->j_wait_transaction_locked,
+				journal->j_barrier_count == 0);
+		goto repeat;
+	}
+
+	if (!journal->j_running_transaction) {
+		read_unlock(&journal->j_state_lock);
+		if (!new_transaction)
+			goto alloc_transaction;
+		write_lock(&journal->j_state_lock);
+		if (!journal->j_running_transaction &&
+		    (handle->h_reserved || !journal->j_barrier_count)) {
+			jbd2_get_transaction(journal, new_transaction);
+			new_transaction = NULL;
+		}
+		write_unlock(&journal->j_state_lock);
+		goto repeat;
+	}
+
+	transaction = journal->j_running_transaction;
+
+	if (!handle->h_reserved) {
+		/* We may have dropped j_state_lock - restart in that case */
+		if (add_transaction_credits(journal, blocks, rsv_blocks)) {
+			/*
+			 * add_transaction_credits releases
+			 * j_state_lock on a non-zero return
+			 */
+			__release(&journal->j_state_lock);
+			goto repeat;
+		}
+	} else {
+		/*
+		 * We have handle reserved so we are allowed to join T_LOCKED
+		 * transaction and we don't have to check for transaction size
+		 * and journal space. But we still have to wait while running
+		 * transaction is being switched to a committing one as it
+		 * won't wait for any handles anymore.
+		 */
+		if (transaction->t_state == T_SWITCH) {
+			wait_transaction_switching(journal);
+			goto repeat;
+		}
+		sub_reserved_credits(journal, blocks);
+		handle->h_reserved = 0;
+	}
+
+	/* OK, account for the buffers that this operation expects to
+	 * use and add the handle to the running transaction.
+	 */
+	update_t_max_wait(transaction, ts);
+	handle->h_transaction = transaction;
+	handle->h_requested_credits = blocks;
+	handle->h_revoke_credits_requested = handle->h_revoke_credits;
+	handle->h_start_jiffies = jiffies;
+	atomic_inc(&transaction->t_updates);
+	atomic_inc(&transaction->t_handle_count);
+	jbd2_debug(4, "Handle %p given %d credits (total %d, free %lu)\n",
+		  handle, blocks,
+		  atomic_read(&transaction->t_outstanding_credits),
+		  jbd2_log_space_left(journal));
+	read_unlock(&journal->j_state_lock);
+	current->journal_info = handle;
+
+	rwsem_acquire_read(&journal->j_trans_commit_map, 0, 0, _THIS_IP_);
+	jbd2_journal_free_transaction(new_transaction);
+	/*
+	 * Ensure that no allocations done while the transaction is open are
+	 * going to recurse back to the fs layer.
+	 */
+	handle->saved_alloc_context = memalloc_nofs_save();
+	return 0;
+}
+
+/* Allocate a new handle.  This should probably be in a slab... */
+static handle_t *new_handle(int nblocks)
+{
+	handle_t *handle = jbd2_alloc_handle(GFP_NOFS);
+	if (!handle)
+		return NULL;
+	handle->h_total_credits = nblocks;
+	handle->h_ref = 1;
+
+	return handle;
+}
+
+handle_t *jbd2__journal_start(journal_t *journal, int nblocks, int rsv_blocks,
+			      int revoke_records, gfp_t gfp_mask,
+			      unsigned int type, unsigned int line_no)
+{
+	handle_t *handle = journal_current_handle();
+	int err;
+
+	if (!journal)
+		return ERR_PTR(-EROFS);
+
+	if (handle) {
+		J_ASSERT(handle->h_transaction->t_journal == journal);
+		handle->h_ref++;
+		return handle;
+	}
+
+	nblocks += DIV_ROUND_UP(revoke_records,
+				journal->j_revoke_records_per_block);
+	handle = new_handle(nblocks);
+	if (!handle)
+		return ERR_PTR(-ENOMEM);
+	if (rsv_blocks) {
+		handle_t *rsv_handle;
+
+		rsv_handle = new_handle(rsv_blocks);
+		if (!rsv_handle) {
+			jbd2_free_handle(handle);
+			return ERR_PTR(-ENOMEM);
+		}
+		rsv_handle->h_reserved = 1;
+		rsv_handle->h_journal = journal;
+		handle->h_rsv_handle = rsv_handle;
+	}
+	handle->h_revoke_credits = revoke_records;
+
+	err = start_this_handle(journal, handle, gfp_mask);
+	if (err < 0) {
+		if (handle->h_rsv_handle)
+			jbd2_free_handle(handle->h_rsv_handle);
+		jbd2_free_handle(handle);
+		return ERR_PTR(err);
+	}
+	handle->h_type = type;
+	handle->h_line_no = line_no;
+	trace_jbd2_handle_start(journal->j_fs_dev->bd_dev,
+				handle->h_transaction->t_tid, type,
+				line_no, nblocks);
+
+	return handle;
+}
+EXPORT_SYMBOL(jbd2__journal_start);
+
+
+/**
+ * jbd2_journal_start() - Obtain a new handle.
+ * @journal: Journal to start transaction on.
+ * @nblocks: number of block buffer we might modify
+ *
+ * We make sure that the transaction can guarantee at least nblocks of
+ * modified buffers in the log.  We block until the log can guarantee
+ * that much space. Additionally, if rsv_blocks > 0, we also create another
+ * handle with rsv_blocks reserved blocks in the journal. This handle is
+ * stored in h_rsv_handle. It is not attached to any particular transaction
+ * and thus doesn't block transaction commit. If the caller uses this reserved
+ * handle, it has to set h_rsv_handle to NULL as otherwise jbd2_journal_stop()
+ * on the parent handle will dispose the reserved one. Reserved handle has to
+ * be converted to a normal handle using jbd2_journal_start_reserved() before
+ * it can be used.
+ *
+ * Return a pointer to a newly allocated handle, or an ERR_PTR() value
+ * on failure.
+ */
+handle_t *jbd2_journal_start(journal_t *journal, int nblocks)
+{
+	return jbd2__journal_start(journal, nblocks, 0, 0, GFP_NOFS, 0, 0);
+}
+EXPORT_SYMBOL(jbd2_journal_start);
+
+static void __jbd2_journal_unreserve_handle(handle_t *handle, transaction_t *t)
+{
+	journal_t *journal = handle->h_journal;
+
+	WARN_ON(!handle->h_reserved);
+	sub_reserved_credits(journal, handle->h_total_credits);
+	if (t)
+		atomic_sub(handle->h_total_credits, &t->t_outstanding_credits);
+}
+
+void jbd2_journal_free_reserved(handle_t *handle)
+{
+	journal_t *journal = handle->h_journal;
+
+	/* Get j_state_lock to pin running transaction if it exists */
+	read_lock(&journal->j_state_lock);
+	__jbd2_journal_unreserve_handle(handle, journal->j_running_transaction);
+	read_unlock(&journal->j_state_lock);
+	jbd2_free_handle(handle);
+}
+EXPORT_SYMBOL(jbd2_journal_free_reserved);
+
+/**
+ * jbd2_journal_start_reserved() - start reserved handle
+ * @handle: handle to start
+ * @type: for handle statistics
+ * @line_no: for handle statistics
+ *
+ * Start handle that has been previously reserved with jbd2_journal_reserve().
+ * This attaches @handle to the running transaction (or creates one if there's
+ * not transaction running). Unlike jbd2_journal_start() this function cannot
+ * block on journal commit, checkpointing, or similar stuff. It can block on
+ * memory allocation or frozen journal though.
+ *
+ * Return 0 on success, non-zero on error - handle is freed in that case.
+ */
+int jbd2_journal_start_reserved(handle_t *handle, unsigned int type,
+				unsigned int line_no)
+{
+	journal_t *journal = handle->h_journal;
+	int ret = -EIO;
+
+	if (WARN_ON(!handle->h_reserved)) {
+		/* Someone passed in normal handle? Just stop it. */
+		jbd2_journal_stop(handle);
+		return ret;
+	}
+	/*
+	 * Usefulness of mixing of reserved and unreserved handles is
+	 * questionable. So far nobody seems to need it so just error out.
+	 */
+	if (WARN_ON(current->journal_info)) {
+		jbd2_journal_free_reserved(handle);
+		return ret;
+	}
+
+	handle->h_journal = NULL;
+	/*
+	 * GFP_NOFS is here because callers are likely from writeback or
+	 * similarly constrained call sites
+	 */
+	ret = start_this_handle(journal, handle, GFP_NOFS);
+	if (ret < 0) {
+		handle->h_journal = journal;
+		jbd2_journal_free_reserved(handle);
+		return ret;
+	}
+	handle->h_type = type;
+	handle->h_line_no = line_no;
+	trace_jbd2_handle_start(journal->j_fs_dev->bd_dev,
+				handle->h_transaction->t_tid, type,
+				line_no, handle->h_total_credits);
+	return 0;
+}
+EXPORT_SYMBOL(jbd2_journal_start_reserved);
+
+/**
+ * jbd2_journal_extend() - extend buffer credits.
+ * @handle:  handle to 'extend'
+ * @nblocks: nr blocks to try to extend by.
+ * @revoke_records: number of revoke records to try to extend by.
+ *
+ * Some transactions, such as large extends and truncates, can be done
+ * atomically all at once or in several stages.  The operation requests
+ * a credit for a number of buffer modifications in advance, but can
+ * extend its credit if it needs more.
+ *
+ * jbd2_journal_extend tries to give the running handle more buffer credits.
+ * It does not guarantee that allocation - this is a best-effort only.
+ * The calling process MUST be able to deal cleanly with a failure to
+ * extend here.
+ *
+ * Return 0 on success, non-zero on failure.
+ *
+ * return code < 0 implies an error
+ * return code > 0 implies normal transaction-full status.
+ */
+int jbd2_journal_extend(handle_t *handle, int nblocks, int revoke_records)
+{
+	transaction_t *transaction = handle->h_transaction;
+	journal_t *journal;
+	int result;
+	int wanted;
+
+	if (is_handle_aborted(handle))
+		return -EROFS;
+	journal = transaction->t_journal;
+
+	result = 1;
+
+	read_lock(&journal->j_state_lock);
+
+	/* Don't extend a locked-down transaction! */
+	if (transaction->t_state != T_RUNNING) {
+		jbd2_debug(3, "denied handle %p %d blocks: "
+			  "transaction not running\n", handle, nblocks);
+		goto error_out;
+	}
+
+	nblocks += DIV_ROUND_UP(
+			handle->h_revoke_credits_requested + revoke_records,
+			journal->j_revoke_records_per_block) -
+		DIV_ROUND_UP(
+			handle->h_revoke_credits_requested,
+			journal->j_revoke_records_per_block);
+	wanted = atomic_add_return(nblocks,
+				   &transaction->t_outstanding_credits);
+
+	if (wanted > journal->j_max_transaction_buffers) {
+		jbd2_debug(3, "denied handle %p %d blocks: "
+			  "transaction too large\n", handle, nblocks);
+		atomic_sub(nblocks, &transaction->t_outstanding_credits);
+		goto error_out;
+	}
+
+	trace_jbd2_handle_extend(journal->j_fs_dev->bd_dev,
+				 transaction->t_tid,
+				 handle->h_type, handle->h_line_no,
+				 handle->h_total_credits,
+				 nblocks);
+
+	handle->h_total_credits += nblocks;
+	handle->h_requested_credits += nblocks;
+	handle->h_revoke_credits += revoke_records;
+	handle->h_revoke_credits_requested += revoke_records;
+	result = 0;
+
+	jbd2_debug(3, "extended handle %p by %d\n", handle, nblocks);
+error_out:
+	read_unlock(&journal->j_state_lock);
+	return result;
+}
+
+static void stop_this_handle(handle_t *handle)
+{
+	transaction_t *transaction = handle->h_transaction;
+	journal_t *journal = transaction->t_journal;
+	int revokes;
+
+	J_ASSERT(journal_current_handle() == handle);
+	J_ASSERT(atomic_read(&transaction->t_updates) > 0);
+	current->journal_info = NULL;
+	/*
+	 * Subtract necessary revoke descriptor blocks from handle credits. We
+	 * take care to account only for revoke descriptor blocks the
+	 * transaction will really need as large sequences of transactions with
+	 * small numbers of revokes are relatively common.
+	 */
+	revokes = handle->h_revoke_credits_requested - handle->h_revoke_credits;
+	if (revokes) {
+		int t_revokes, revoke_descriptors;
+		int rr_per_blk = journal->j_revoke_records_per_block;
+
+		WARN_ON_ONCE(DIV_ROUND_UP(revokes, rr_per_blk)
+				> handle->h_total_credits);
+		t_revokes = atomic_add_return(revokes,
+				&transaction->t_outstanding_revokes);
+		revoke_descriptors =
+			DIV_ROUND_UP(t_revokes, rr_per_blk) -
+			DIV_ROUND_UP(t_revokes - revokes, rr_per_blk);
+		handle->h_total_credits -= revoke_descriptors;
+	}
+	atomic_sub(handle->h_total_credits,
+		   &transaction->t_outstanding_credits);
+	if (handle->h_rsv_handle)
+		__jbd2_journal_unreserve_handle(handle->h_rsv_handle,
+						transaction);
+	if (atomic_dec_and_test(&transaction->t_updates))
+		wake_up(&journal->j_wait_updates);
+
+	rwsem_release(&journal->j_trans_commit_map, _THIS_IP_);
+	/*
+	 * Scope of the GFP_NOFS context is over here and so we can restore the
+	 * original alloc context.
+	 */
+	memalloc_nofs_restore(handle->saved_alloc_context);
+}
+
+/**
+ * jbd2__journal_restart() - restart a handle .
+ * @handle:  handle to restart
+ * @nblocks: nr credits requested
+ * @revoke_records: number of revoke record credits requested
+ * @gfp_mask: memory allocation flags (for start_this_handle)
+ *
+ * Restart a handle for a multi-transaction filesystem
+ * operation.
+ *
+ * If the jbd2_journal_extend() call above fails to grant new buffer credits
+ * to a running handle, a call to jbd2_journal_restart will commit the
+ * handle's transaction so far and reattach the handle to a new
+ * transaction capable of guaranteeing the requested number of
+ * credits. We preserve reserved handle if there's any attached to the
+ * passed in handle.
+ */
+int jbd2__journal_restart(handle_t *handle, int nblocks, int revoke_records,
+			  gfp_t gfp_mask)
+{
+	transaction_t *transaction = handle->h_transaction;
+	journal_t *journal;
+	tid_t		tid;
+	int		need_to_start;
+	int		ret;
+
+	/* If we've had an abort of any type, don't even think about
+	 * actually doing the restart! */
+	if (is_handle_aborted(handle))
+		return 0;
+	journal = transaction->t_journal;
+	tid = transaction->t_tid;
+
+	/*
+	 * First unlink the handle from its current transaction, and start the
+	 * commit on that.
+	 */
+	jbd2_debug(2, "restarting handle %p\n", handle);
+	stop_this_handle(handle);
+	handle->h_transaction = NULL;
+
+	/*
+	 * TODO: If we use READ_ONCE / WRITE_ONCE for j_commit_request we can
+ 	 * get rid of pointless j_state_lock traffic like this.
+	 */
+	read_lock(&journal->j_state_lock);
+	need_to_start = !tid_geq(journal->j_commit_request, tid);
+	read_unlock(&journal->j_state_lock);
+	if (need_to_start)
+		jbd2_log_start_commit(journal, tid);
+	handle->h_total_credits = nblocks +
+		DIV_ROUND_UP(revoke_records,
+			     journal->j_revoke_records_per_block);
+	handle->h_revoke_credits = revoke_records;
+	ret = start_this_handle(journal, handle, gfp_mask);
+	trace_jbd2_handle_restart(journal->j_fs_dev->bd_dev,
+				 ret ? 0 : handle->h_transaction->t_tid,
+				 handle->h_type, handle->h_line_no,
+				 handle->h_total_credits);
+	return ret;
+}
+EXPORT_SYMBOL(jbd2__journal_restart);
+
+
+int jbd2_journal_restart(handle_t *handle, int nblocks)
+{
+	return jbd2__journal_restart(handle, nblocks, 0, GFP_NOFS);
+}
+EXPORT_SYMBOL(jbd2_journal_restart);
+
+/*
+ * Waits for any outstanding t_updates to finish.
+ * This is called with write j_state_lock held.
+ */
+void jbd2_journal_wait_updates(journal_t *journal)
+{
+	DEFINE_WAIT(wait);
+
+	while (1) {
+		/*
+		 * Note that the running transaction can get freed under us if
+		 * this transaction is getting committed in
+		 * jbd2_journal_commit_transaction() ->
+		 * jbd2_journal_free_transaction(). This can only happen when we
+		 * release j_state_lock -> schedule() -> acquire j_state_lock.
+		 * Hence we should everytime retrieve new j_running_transaction
+		 * value (after j_state_lock release acquire cycle), else it may
+		 * lead to use-after-free of old freed transaction.
+		 */
+		transaction_t *transaction = journal->j_running_transaction;
+
+		if (!transaction)
+			break;
+
+		prepare_to_wait(&journal->j_wait_updates, &wait,
+				TASK_UNINTERRUPTIBLE);
+		if (!atomic_read(&transaction->t_updates)) {
+			finish_wait(&journal->j_wait_updates, &wait);
+			break;
+		}
+		write_unlock(&journal->j_state_lock);
+		schedule();
+		finish_wait(&journal->j_wait_updates, &wait);
+		write_lock(&journal->j_state_lock);
+	}
+}
+
+/**
+ * jbd2_journal_lock_updates () - establish a transaction barrier.
+ * @journal:  Journal to establish a barrier on.
+ *
+ * This locks out any further updates from being started, and blocks
+ * until all existing updates have completed, returning only once the
+ * journal is in a quiescent state with no updates running.
+ *
+ * The journal lock should not be held on entry.
+ */
+void jbd2_journal_lock_updates(journal_t *journal)
+{
+	jbd2_might_wait_for_commit(journal);
+
+	write_lock(&journal->j_state_lock);
+	++journal->j_barrier_count;
+
+	/* Wait until there are no reserved handles */
+	if (atomic_read(&journal->j_reserved_credits)) {
+		write_unlock(&journal->j_state_lock);
+		wait_event(journal->j_wait_reserved,
+			   atomic_read(&journal->j_reserved_credits) == 0);
+		write_lock(&journal->j_state_lock);
+	}
+
+	/* Wait until there are no running t_updates */
+	jbd2_journal_wait_updates(journal);
+
+	write_unlock(&journal->j_state_lock);
+
+	/*
+	 * We have now established a barrier against other normal updates, but
+	 * we also need to barrier against other jbd2_journal_lock_updates() calls
+	 * to make sure that we serialise special journal-locked operations
+	 * too.
+	 */
+	mutex_lock(&journal->j_barrier);
+}
+
+/**
+ * jbd2_journal_unlock_updates () - release barrier
+ * @journal:  Journal to release the barrier on.
+ *
+ * Release a transaction barrier obtained with jbd2_journal_lock_updates().
+ *
+ * Should be called without the journal lock held.
+ */
+void jbd2_journal_unlock_updates (journal_t *journal)
+{
+	J_ASSERT(journal->j_barrier_count != 0);
+
+	mutex_unlock(&journal->j_barrier);
+	write_lock(&journal->j_state_lock);
+	--journal->j_barrier_count;
+	write_unlock(&journal->j_state_lock);
+	wake_up_all(&journal->j_wait_transaction_locked);
+}
+
+static void warn_dirty_buffer(struct buffer_head *bh)
+{
+	printk(KERN_WARNING
+	       "JBD2: Spotted dirty metadata buffer (dev = %pg, blocknr = %llu). "
+	       "There's a risk of filesystem corruption in case of system "
+	       "crash.\n",
+	       bh->b_bdev, (unsigned long long)bh->b_blocknr);
+}
+
+/* Call t_frozen trigger and copy buffer data into jh->b_frozen_data. */
+static void jbd2_freeze_jh_data(struct journal_head *jh)
+{
+	struct page *page;
+	int offset;
+	char *source;
+	struct buffer_head *bh = jh2bh(jh);
+
+	J_EXPECT_JH(jh, buffer_uptodate(bh), "Possible IO failure.\n");
+	page = bh->b_page;
+	offset = offset_in_page(bh->b_data);
+	source = kmap_atomic(page);
+	/* Fire data frozen trigger just before we copy the data */
+	jbd2_buffer_frozen_trigger(jh, source + offset, jh->b_triggers);
+	memcpy(jh->b_frozen_data, source + offset, bh->b_size);
+	kunmap_atomic(source);
+
+	/*
+	 * Now that the frozen data is saved off, we need to store any matching
+	 * triggers.
+	 */
+	jh->b_frozen_triggers = jh->b_triggers;
+}
+
+/*
+ * If the buffer is already part of the current transaction, then there
+ * is nothing we need to do.  If it is already part of a prior
+ * transaction which we are still committing to disk, then we need to
+ * make sure that we do not overwrite the old copy: we do copy-out to
+ * preserve the copy going to disk.  We also account the buffer against
+ * the handle's metadata buffer credits (unless the buffer is already
+ * part of the transaction, that is).
+ *
+ */
+static int
+do_get_write_access(handle_t *handle, struct journal_head *jh,
+			int force_copy)
+{
+	struct buffer_head *bh;
+	transaction_t *transaction = handle->h_transaction;
+	journal_t *journal;
+	int error;
+	char *frozen_buffer = NULL;
+	unsigned long start_lock, time_lock;
+
+	journal = transaction->t_journal;
+
+	jbd2_debug(5, "journal_head %p, force_copy %d\n", jh, force_copy);
+
+	JBUFFER_TRACE(jh, "entry");
+repeat:
+	bh = jh2bh(jh);
+
+	/* @@@ Need to check for errors here at some point. */
+
+ 	start_lock = jiffies;
+	lock_buffer(bh);
+	spin_lock(&jh->b_state_lock);
+
+	/* If it takes too long to lock the buffer, trace it */
+	time_lock = jbd2_time_diff(start_lock, jiffies);
+	if (time_lock > HZ/10)
+		trace_jbd2_lock_buffer_stall(bh->b_bdev->bd_dev,
+			jiffies_to_msecs(time_lock));
+
+	/* We now hold the buffer lock so it is safe to query the buffer
+	 * state.  Is the buffer dirty?
+	 *
+	 * If so, there are two possibilities.  The buffer may be
+	 * non-journaled, and undergoing a quite legitimate writeback.
+	 * Otherwise, it is journaled, and we don't expect dirty buffers
+	 * in that state (the buffers should be marked JBD_Dirty
+	 * instead.)  So either the IO is being done under our own
+	 * control and this is a bug, or it's a third party IO such as
+	 * dump(8) (which may leave the buffer scheduled for read ---
+	 * ie. locked but not dirty) or tune2fs (which may actually have
+	 * the buffer dirtied, ugh.)  */
+
+	if (buffer_dirty(bh) && jh->b_transaction) {
+		warn_dirty_buffer(bh);
+		/*
+		 * We need to clean the dirty flag and we must do it under the
+		 * buffer lock to be sure we don't race with running write-out.
+		 */
+		JBUFFER_TRACE(jh, "Journalling dirty buffer");
+		clear_buffer_dirty(bh);
+		/*
+		 * The buffer is going to be added to BJ_Reserved list now and
+		 * nothing guarantees jbd2_journal_dirty_metadata() will be
+		 * ever called for it. So we need to set jbddirty bit here to
+		 * make sure the buffer is dirtied and written out when the
+		 * journaling machinery is done with it.
+		 */
+		set_buffer_jbddirty(bh);
+	}
+
+	error = -EROFS;
+	if (is_handle_aborted(handle)) {
+		spin_unlock(&jh->b_state_lock);
+		unlock_buffer(bh);
+		goto out;
+	}
+	error = 0;
+
+	/*
+	 * The buffer is already part of this transaction if b_transaction or
+	 * b_next_transaction points to it
+	 */
+	if (jh->b_transaction == transaction ||
+	    jh->b_next_transaction == transaction) {
+		unlock_buffer(bh);
+		goto done;
+	}
+
+	/*
+	 * this is the first time this transaction is touching this buffer,
+	 * reset the modified flag
+	 */
+	jh->b_modified = 0;
+
+	/*
+	 * If the buffer is not journaled right now, we need to make sure it
+	 * doesn't get written to disk before the caller actually commits the
+	 * new data
+	 */
+	if (!jh->b_transaction) {
+		JBUFFER_TRACE(jh, "no transaction");
+		J_ASSERT_JH(jh, !jh->b_next_transaction);
+		JBUFFER_TRACE(jh, "file as BJ_Reserved");
+		/*
+		 * Make sure all stores to jh (b_modified, b_frozen_data) are
+		 * visible before attaching it to the running transaction.
+		 * Paired with barrier in jbd2_write_access_granted()
+		 */
+		smp_wmb();
+		spin_lock(&journal->j_list_lock);
+		if (test_clear_buffer_dirty(bh)) {
+			/*
+			 * Execute buffer dirty clearing and jh->b_transaction
+			 * assignment under journal->j_list_lock locked to
+			 * prevent bh being removed from checkpoint list if
+			 * the buffer is in an intermediate state (not dirty
+			 * and jh->b_transaction is NULL).
+			 */
+			JBUFFER_TRACE(jh, "Journalling dirty buffer");
+			set_buffer_jbddirty(bh);
+		}
+		__jbd2_journal_file_buffer(jh, transaction, BJ_Reserved);
+		spin_unlock(&journal->j_list_lock);
+		unlock_buffer(bh);
+		goto done;
+	}
+	unlock_buffer(bh);
+
+	/*
+	 * If there is already a copy-out version of this buffer, then we don't
+	 * need to make another one
+	 */
+	if (jh->b_frozen_data) {
+		JBUFFER_TRACE(jh, "has frozen data");
+		J_ASSERT_JH(jh, jh->b_next_transaction == NULL);
+		goto attach_next;
+	}
+
+	JBUFFER_TRACE(jh, "owned by older transaction");
+	J_ASSERT_JH(jh, jh->b_next_transaction == NULL);
+	J_ASSERT_JH(jh, jh->b_transaction == journal->j_committing_transaction);
+
+	/*
+	 * There is one case we have to be very careful about.  If the
+	 * committing transaction is currently writing this buffer out to disk
+	 * and has NOT made a copy-out, then we cannot modify the buffer
+	 * contents at all right now.  The essence of copy-out is that it is
+	 * the extra copy, not the primary copy, which gets journaled.  If the
+	 * primary copy is already going to disk then we cannot do copy-out
+	 * here.
+	 */
+	if (buffer_shadow(bh)) {
+		JBUFFER_TRACE(jh, "on shadow: sleep");
+		spin_unlock(&jh->b_state_lock);
+		wait_on_bit_io(&bh->b_state, BH_Shadow, TASK_UNINTERRUPTIBLE);
+		goto repeat;
+	}
+
+	/*
+	 * Only do the copy if the currently-owning transaction still needs it.
+	 * If buffer isn't on BJ_Metadata list, the committing transaction is
+	 * past that stage (here we use the fact that BH_Shadow is set under
+	 * bh_state lock together with refiling to BJ_Shadow list and at this
+	 * point we know the buffer doesn't have BH_Shadow set).
+	 *
+	 * Subtle point, though: if this is a get_undo_access, then we will be
+	 * relying on the frozen_data to contain the new value of the
+	 * committed_data record after the transaction, so we HAVE to force the
+	 * frozen_data copy in that case.
+	 */
+	if (jh->b_jlist == BJ_Metadata || force_copy) {
+		JBUFFER_TRACE(jh, "generate frozen data");
+		if (!frozen_buffer) {
+			JBUFFER_TRACE(jh, "allocate memory for buffer");
+			spin_unlock(&jh->b_state_lock);
+			frozen_buffer = jbd2_alloc(jh2bh(jh)->b_size,
+						   GFP_NOFS | __GFP_NOFAIL);
+			goto repeat;
+		}
+		jh->b_frozen_data = frozen_buffer;
+		frozen_buffer = NULL;
+		jbd2_freeze_jh_data(jh);
+	}
+attach_next:
+	/*
+	 * Make sure all stores to jh (b_modified, b_frozen_data) are visible
+	 * before attaching it to the running transaction. Paired with barrier
+	 * in jbd2_write_access_granted()
+	 */
+	smp_wmb();
+	jh->b_next_transaction = transaction;
+
+done:
+	spin_unlock(&jh->b_state_lock);
+
+	/*
+	 * If we are about to journal a buffer, then any revoke pending on it is
+	 * no longer valid
+	 */
+	jbd2_journal_cancel_revoke(handle, jh);
+
+out:
+	if (unlikely(frozen_buffer))	/* It's usually NULL */
+		jbd2_free(frozen_buffer, bh->b_size);
+
+	JBUFFER_TRACE(jh, "exit");
+	return error;
+}
+
+/* Fast check whether buffer is already attached to the required transaction */
+static bool jbd2_write_access_granted(handle_t *handle, struct buffer_head *bh,
+							bool undo)
+{
+	struct journal_head *jh;
+	bool ret = false;
+
+	/* Dirty buffers require special handling... */
+	if (buffer_dirty(bh))
+		return false;
+
+	/*
+	 * RCU protects us from dereferencing freed pages. So the checks we do
+	 * are guaranteed not to oops. However the jh slab object can get freed
+	 * & reallocated while we work with it. So we have to be careful. When
+	 * we see jh attached to the running transaction, we know it must stay
+	 * so until the transaction is committed. Thus jh won't be freed and
+	 * will be attached to the same bh while we run.  However it can
+	 * happen jh gets freed, reallocated, and attached to the transaction
+	 * just after we get pointer to it from bh. So we have to be careful
+	 * and recheck jh still belongs to our bh before we return success.
+	 */
+	rcu_read_lock();
+	if (!buffer_jbd(bh))
+		goto out;
+	/* This should be bh2jh() but that doesn't work with inline functions */
+	jh = READ_ONCE(bh->b_private);
+	if (!jh)
+		goto out;
+	/* For undo access buffer must have data copied */
+	if (undo && !jh->b_committed_data)
+		goto out;
+	if (READ_ONCE(jh->b_transaction) != handle->h_transaction &&
+	    READ_ONCE(jh->b_next_transaction) != handle->h_transaction)
+		goto out;
+	/*
+	 * There are two reasons for the barrier here:
+	 * 1) Make sure to fetch b_bh after we did previous checks so that we
+	 * detect when jh went through free, realloc, attach to transaction
+	 * while we were checking. Paired with implicit barrier in that path.
+	 * 2) So that access to bh done after jbd2_write_access_granted()
+	 * doesn't get reordered and see inconsistent state of concurrent
+	 * do_get_write_access().
+	 */
+	smp_mb();
+	if (unlikely(jh->b_bh != bh))
+		goto out;
+	ret = true;
+out:
+	rcu_read_unlock();
+	return ret;
+}
+
+/**
+ * jbd2_journal_get_write_access() - notify intent to modify a buffer
+ *				     for metadata (not data) update.
+ * @handle: transaction to add buffer modifications to
+ * @bh:     bh to be used for metadata writes
+ *
+ * Returns: error code or 0 on success.
+ *
+ * In full data journalling mode the buffer may be of type BJ_AsyncData,
+ * because we're ``write()ing`` a buffer which is also part of a shared mapping.
+ */
+
+int jbd2_journal_get_write_access(handle_t *handle, struct buffer_head *bh)
+{
+	struct journal_head *jh;
+	int rc;
+
+	if (is_handle_aborted(handle))
+		return -EROFS;
+
+	if (jbd2_write_access_granted(handle, bh, false))
+		return 0;
+
+	jh = jbd2_journal_add_journal_head(bh);
+	/* We do not want to get caught playing with fields which the
+	 * log thread also manipulates.  Make sure that the buffer
+	 * completes any outstanding IO before proceeding. */
+	rc = do_get_write_access(handle, jh, 0);
+	jbd2_journal_put_journal_head(jh);
+	return rc;
+}
+
+
+/*
+ * When the user wants to journal a newly created buffer_head
+ * (ie. getblk() returned a new buffer and we are going to populate it
+ * manually rather than reading off disk), then we need to keep the
+ * buffer_head locked until it has been completely filled with new
+ * data.  In this case, we should be able to make the assertion that
+ * the bh is not already part of an existing transaction.
+ *
+ * The buffer should already be locked by the caller by this point.
+ * There is no lock ranking violation: it was a newly created,
+ * unlocked buffer beforehand. */
+
+/**
+ * jbd2_journal_get_create_access () - notify intent to use newly created bh
+ * @handle: transaction to new buffer to
+ * @bh: new buffer.
+ *
+ * Call this if you create a new bh.
+ */
+int jbd2_journal_get_create_access(handle_t *handle, struct buffer_head *bh)
+{
+	transaction_t *transaction = handle->h_transaction;
+	journal_t *journal;
+	struct journal_head *jh = jbd2_journal_add_journal_head(bh);
+	int err;
+
+	jbd2_debug(5, "journal_head %p\n", jh);
+	err = -EROFS;
+	if (is_handle_aborted(handle))
+		goto out;
+	journal = transaction->t_journal;
+	err = 0;
+
+	JBUFFER_TRACE(jh, "entry");
+	/*
+	 * The buffer may already belong to this transaction due to pre-zeroing
+	 * in the filesystem's new_block code.  It may also be on the previous,
+	 * committing transaction's lists, but it HAS to be in Forget state in
+	 * that case: the transaction must have deleted the buffer for it to be
+	 * reused here.
+	 */
+	spin_lock(&jh->b_state_lock);
+	J_ASSERT_JH(jh, (jh->b_transaction == transaction ||
+		jh->b_transaction == NULL ||
+		(jh->b_transaction == journal->j_committing_transaction &&
+			  jh->b_jlist == BJ_Forget)));
+
+	J_ASSERT_JH(jh, jh->b_next_transaction == NULL);
+	J_ASSERT_JH(jh, buffer_locked(jh2bh(jh)));
+
+	if (jh->b_transaction == NULL) {
+		/*
+		 * Previous jbd2_journal_forget() could have left the buffer
+		 * with jbddirty bit set because it was being committed. When
+		 * the commit finished, we've filed the buffer for
+		 * checkpointing and marked it dirty. Now we are reallocating
+		 * the buffer so the transaction freeing it must have
+		 * committed and so it's safe to clear the dirty bit.
+		 */
+		clear_buffer_dirty(jh2bh(jh));
+		/* first access by this transaction */
+		jh->b_modified = 0;
+
+		JBUFFER_TRACE(jh, "file as BJ_Reserved");
+		spin_lock(&journal->j_list_lock);
+		__jbd2_journal_file_buffer(jh, transaction, BJ_Reserved);
+		spin_unlock(&journal->j_list_lock);
+	} else if (jh->b_transaction == journal->j_committing_transaction) {
+		/* first access by this transaction */
+		jh->b_modified = 0;
+
+		JBUFFER_TRACE(jh, "set next transaction");
+		spin_lock(&journal->j_list_lock);
+		jh->b_next_transaction = transaction;
+		spin_unlock(&journal->j_list_lock);
+	}
+	spin_unlock(&jh->b_state_lock);
+
+	/*
+	 * akpm: I added this.  ext3_alloc_branch can pick up new indirect
+	 * blocks which contain freed but then revoked metadata.  We need
+	 * to cancel the revoke in case we end up freeing it yet again
+	 * and the reallocating as data - this would cause a second revoke,
+	 * which hits an assertion error.
+	 */
+	JBUFFER_TRACE(jh, "cancelling revoke");
+	jbd2_journal_cancel_revoke(handle, jh);
+out:
+	jbd2_journal_put_journal_head(jh);
+	return err;
+}
+
+/**
+ * jbd2_journal_get_undo_access() -  Notify intent to modify metadata with
+ *     non-rewindable consequences
+ * @handle: transaction
+ * @bh: buffer to undo
+ *
+ * Sometimes there is a need to distinguish between metadata which has
+ * been committed to disk and that which has not.  The ext3fs code uses
+ * this for freeing and allocating space, we have to make sure that we
+ * do not reuse freed space until the deallocation has been committed,
+ * since if we overwrote that space we would make the delete
+ * un-rewindable in case of a crash.
+ *
+ * To deal with that, jbd2_journal_get_undo_access requests write access to a
+ * buffer for parts of non-rewindable operations such as delete
+ * operations on the bitmaps.  The journaling code must keep a copy of
+ * the buffer's contents prior to the undo_access call until such time
+ * as we know that the buffer has definitely been committed to disk.
+ *
+ * We never need to know which transaction the committed data is part
+ * of, buffers touched here are guaranteed to be dirtied later and so
+ * will be committed to a new transaction in due course, at which point
+ * we can discard the old committed data pointer.
+ *
+ * Returns error number or 0 on success.
+ */
+int jbd2_journal_get_undo_access(handle_t *handle, struct buffer_head *bh)
+{
+	int err;
+	struct journal_head *jh;
+	char *committed_data = NULL;
+
+	if (is_handle_aborted(handle))
+		return -EROFS;
+
+	if (jbd2_write_access_granted(handle, bh, true))
+		return 0;
+
+	jh = jbd2_journal_add_journal_head(bh);
+	JBUFFER_TRACE(jh, "entry");
+
+	/*
+	 * Do this first --- it can drop the journal lock, so we want to
+	 * make sure that obtaining the committed_data is done
+	 * atomically wrt. completion of any outstanding commits.
+	 */
+	err = do_get_write_access(handle, jh, 1);
+	if (err)
+		goto out;
+
+repeat:
+	if (!jh->b_committed_data)
+		committed_data = jbd2_alloc(jh2bh(jh)->b_size,
+					    GFP_NOFS|__GFP_NOFAIL);
+
+	spin_lock(&jh->b_state_lock);
+	if (!jh->b_committed_data) {
+		/* Copy out the current buffer contents into the
+		 * preserved, committed copy. */
+		JBUFFER_TRACE(jh, "generate b_committed data");
+		if (!committed_data) {
+			spin_unlock(&jh->b_state_lock);
+			goto repeat;
+		}
+
+		jh->b_committed_data = committed_data;
+		committed_data = NULL;
+		memcpy(jh->b_committed_data, bh->b_data, bh->b_size);
+	}
+	spin_unlock(&jh->b_state_lock);
+out:
+	jbd2_journal_put_journal_head(jh);
+	if (unlikely(committed_data))
+		jbd2_free(committed_data, bh->b_size);
+	return err;
+}
+
+/**
+ * jbd2_journal_set_triggers() - Add triggers for commit writeout
+ * @bh: buffer to trigger on
+ * @type: struct jbd2_buffer_trigger_type containing the trigger(s).
+ *
+ * Set any triggers on this journal_head.  This is always safe, because
+ * triggers for a committing buffer will be saved off, and triggers for
+ * a running transaction will match the buffer in that transaction.
+ *
+ * Call with NULL to clear the triggers.
+ */
+void jbd2_journal_set_triggers(struct buffer_head *bh,
+			       struct jbd2_buffer_trigger_type *type)
+{
+	struct journal_head *jh = jbd2_journal_grab_journal_head(bh);
+
+	if (WARN_ON_ONCE(!jh))
+		return;
+	jh->b_triggers = type;
+	jbd2_journal_put_journal_head(jh);
+}
+
+void jbd2_buffer_frozen_trigger(struct journal_head *jh, void *mapped_data,
+				struct jbd2_buffer_trigger_type *triggers)
+{
+	struct buffer_head *bh = jh2bh(jh);
+
+	if (!triggers || !triggers->t_frozen)
+		return;
+
+	triggers->t_frozen(triggers, bh, mapped_data, bh->b_size);
+}
+
+void jbd2_buffer_abort_trigger(struct journal_head *jh,
+			       struct jbd2_buffer_trigger_type *triggers)
+{
+	if (!triggers || !triggers->t_abort)
+		return;
+
+	triggers->t_abort(triggers, jh2bh(jh));
+}
+
+/**
+ * jbd2_journal_dirty_metadata() -  mark a buffer as containing dirty metadata
+ * @handle: transaction to add buffer to.
+ * @bh: buffer to mark
+ *
+ * mark dirty metadata which needs to be journaled as part of the current
+ * transaction.
+ *
+ * The buffer must have previously had jbd2_journal_get_write_access()
+ * called so that it has a valid journal_head attached to the buffer
+ * head.
+ *
+ * The buffer is placed on the transaction's metadata list and is marked
+ * as belonging to the transaction.
+ *
+ * Returns error number or 0 on success.
+ *
+ * Special care needs to be taken if the buffer already belongs to the
+ * current committing transaction (in which case we should have frozen
+ * data present for that commit).  In that case, we don't relink the
+ * buffer: that only gets done when the old transaction finally
+ * completes its commit.
+ */
+int jbd2_journal_dirty_metadata(handle_t *handle, struct buffer_head *bh)
+{
+	transaction_t *transaction = handle->h_transaction;
+	journal_t *journal;
+	struct journal_head *jh;
+	int ret = 0;
+
+	if (!buffer_jbd(bh))
+		return -EUCLEAN;
+
+	/*
+	 * We don't grab jh reference here since the buffer must be part
+	 * of the running transaction.
+	 */
+	jh = bh2jh(bh);
+	jbd2_debug(5, "journal_head %p\n", jh);
+	JBUFFER_TRACE(jh, "entry");
+
+	/*
+	 * This and the following assertions are unreliable since we may see jh
+	 * in inconsistent state unless we grab bh_state lock. But this is
+	 * crucial to catch bugs so let's do a reliable check until the
+	 * lockless handling is fully proven.
+	 */
+	if (data_race(jh->b_transaction != transaction &&
+	    jh->b_next_transaction != transaction)) {
+		spin_lock(&jh->b_state_lock);
+		J_ASSERT_JH(jh, jh->b_transaction == transaction ||
+				jh->b_next_transaction == transaction);
+		spin_unlock(&jh->b_state_lock);
+	}
+	if (jh->b_modified == 1) {
+		/* If it's in our transaction it must be in BJ_Metadata list. */
+		if (data_race(jh->b_transaction == transaction &&
+		    jh->b_jlist != BJ_Metadata)) {
+			spin_lock(&jh->b_state_lock);
+			if (jh->b_transaction == transaction &&
+			    jh->b_jlist != BJ_Metadata)
+				pr_err("JBD2: assertion failure: h_type=%u "
+				       "h_line_no=%u block_no=%llu jlist=%u\n",
+				       handle->h_type, handle->h_line_no,
+				       (unsigned long long) bh->b_blocknr,
+				       jh->b_jlist);
+			J_ASSERT_JH(jh, jh->b_transaction != transaction ||
+					jh->b_jlist == BJ_Metadata);
+			spin_unlock(&jh->b_state_lock);
+		}
+		goto out;
+	}
+
+	journal = transaction->t_journal;
+	spin_lock(&jh->b_state_lock);
+
+	if (is_handle_aborted(handle)) {
+		/*
+		 * Check journal aborting with @jh->b_state_lock locked,
+		 * since 'jh->b_transaction' could be replaced with
+		 * 'jh->b_next_transaction' during old transaction
+		 * committing if journal aborted, which may fail
+		 * assertion on 'jh->b_frozen_data == NULL'.
+		 */
+		ret = -EROFS;
+		goto out_unlock_bh;
+	}
+
+	if (jh->b_modified == 0) {
+		/*
+		 * This buffer's got modified and becoming part
+		 * of the transaction. This needs to be done
+		 * once a transaction -bzzz
+		 */
+		if (WARN_ON_ONCE(jbd2_handle_buffer_credits(handle) <= 0)) {
+			ret = -ENOSPC;
+			goto out_unlock_bh;
+		}
+		jh->b_modified = 1;
+		handle->h_total_credits--;
+	}
+
+	/*
+	 * fastpath, to avoid expensive locking.  If this buffer is already
+	 * on the running transaction's metadata list there is nothing to do.
+	 * Nobody can take it off again because there is a handle open.
+	 * I _think_ we're OK here with SMP barriers - a mistaken decision will
+	 * result in this test being false, so we go in and take the locks.
+	 */
+	if (jh->b_transaction == transaction && jh->b_jlist == BJ_Metadata) {
+		JBUFFER_TRACE(jh, "fastpath");
+		if (unlikely(jh->b_transaction !=
+			     journal->j_running_transaction)) {
+			printk(KERN_ERR "JBD2: %s: "
+			       "jh->b_transaction (%llu, %p, %u) != "
+			       "journal->j_running_transaction (%p, %u)\n",
+			       journal->j_devname,
+			       (unsigned long long) bh->b_blocknr,
+			       jh->b_transaction,
+			       jh->b_transaction ? jh->b_transaction->t_tid : 0,
+			       journal->j_running_transaction,
+			       journal->j_running_transaction ?
+			       journal->j_running_transaction->t_tid : 0);
+			ret = -EINVAL;
+		}
+		goto out_unlock_bh;
+	}
+
+	set_buffer_jbddirty(bh);
+
+	/*
+	 * Metadata already on the current transaction list doesn't
+	 * need to be filed.  Metadata on another transaction's list must
+	 * be committing, and will be refiled once the commit completes:
+	 * leave it alone for now.
+	 */
+	if (jh->b_transaction != transaction) {
+		JBUFFER_TRACE(jh, "already on other transaction");
+		if (unlikely(((jh->b_transaction !=
+			       journal->j_committing_transaction)) ||
+			     (jh->b_next_transaction != transaction))) {
+			printk(KERN_ERR "jbd2_journal_dirty_metadata: %s: "
+			       "bad jh for block %llu: "
+			       "transaction (%p, %u), "
+			       "jh->b_transaction (%p, %u), "
+			       "jh->b_next_transaction (%p, %u), jlist %u\n",
+			       journal->j_devname,
+			       (unsigned long long) bh->b_blocknr,
+			       transaction, transaction->t_tid,
+			       jh->b_transaction,
+			       jh->b_transaction ?
+			       jh->b_transaction->t_tid : 0,
+			       jh->b_next_transaction,
+			       jh->b_next_transaction ?
+			       jh->b_next_transaction->t_tid : 0,
+			       jh->b_jlist);
+			WARN_ON(1);
+			ret = -EINVAL;
+		}
+		/* And this case is illegal: we can't reuse another
+		 * transaction's data buffer, ever. */
+		goto out_unlock_bh;
+	}
+
+	/* That test should have eliminated the following case: */
+	J_ASSERT_JH(jh, jh->b_frozen_data == NULL);
+
+	JBUFFER_TRACE(jh, "file as BJ_Metadata");
+	spin_lock(&journal->j_list_lock);
+	__jbd2_journal_file_buffer(jh, transaction, BJ_Metadata);
+	spin_unlock(&journal->j_list_lock);
+out_unlock_bh:
+	spin_unlock(&jh->b_state_lock);
+out:
+	JBUFFER_TRACE(jh, "exit");
+	return ret;
+}
+
+/**
+ * jbd2_journal_forget() - bforget() for potentially-journaled buffers.
+ * @handle: transaction handle
+ * @bh:     bh to 'forget'
+ *
+ * We can only do the bforget if there are no commits pending against the
+ * buffer.  If the buffer is dirty in the current running transaction we
+ * can safely unlink it.
+ *
+ * bh may not be a journalled buffer at all - it may be a non-JBD
+ * buffer which came off the hashtable.  Check for this.
+ *
+ * Decrements bh->b_count by one.
+ *
+ * Allow this call even if the handle has aborted --- it may be part of
+ * the caller's cleanup after an abort.
+ */
+int jbd2_journal_forget(handle_t *handle, struct buffer_head *bh)
+{
+	transaction_t *transaction = handle->h_transaction;
+	journal_t *journal;
+	struct journal_head *jh;
+	int drop_reserve = 0;
+	int err = 0;
+	int was_modified = 0;
+
+	if (is_handle_aborted(handle))
+		return -EROFS;
+	journal = transaction->t_journal;
+
+	BUFFER_TRACE(bh, "entry");
+
+	jh = jbd2_journal_grab_journal_head(bh);
+	if (!jh) {
+		__bforget(bh);
+		return 0;
+	}
+
+	spin_lock(&jh->b_state_lock);
+
+	/* Critical error: attempting to delete a bitmap buffer, maybe?
+	 * Don't do any jbd operations, and return an error. */
+	if (!J_EXPECT_JH(jh, !jh->b_committed_data,
+			 "inconsistent data on disk")) {
+		err = -EIO;
+		goto drop;
+	}
+
+	/* keep track of whether or not this transaction modified us */
+	was_modified = jh->b_modified;
+
+	/*
+	 * The buffer's going from the transaction, we must drop
+	 * all references -bzzz
+	 */
+	jh->b_modified = 0;
+
+	if (jh->b_transaction == transaction) {
+		J_ASSERT_JH(jh, !jh->b_frozen_data);
+
+		/* If we are forgetting a buffer which is already part
+		 * of this transaction, then we can just drop it from
+		 * the transaction immediately. */
+		clear_buffer_dirty(bh);
+		clear_buffer_jbddirty(bh);
+
+		JBUFFER_TRACE(jh, "belongs to current transaction: unfile");
+
+		/*
+		 * we only want to drop a reference if this transaction
+		 * modified the buffer
+		 */
+		if (was_modified)
+			drop_reserve = 1;
+
+		/*
+		 * We are no longer going to journal this buffer.
+		 * However, the commit of this transaction is still
+		 * important to the buffer: the delete that we are now
+		 * processing might obsolete an old log entry, so by
+		 * committing, we can satisfy the buffer's checkpoint.
+		 *
+		 * So, if we have a checkpoint on the buffer, we should
+		 * now refile the buffer on our BJ_Forget list so that
+		 * we know to remove the checkpoint after we commit.
+		 */
+
+		spin_lock(&journal->j_list_lock);
+		if (jh->b_cp_transaction) {
+			__jbd2_journal_temp_unlink_buffer(jh);
+			__jbd2_journal_file_buffer(jh, transaction, BJ_Forget);
+		} else {
+			__jbd2_journal_unfile_buffer(jh);
+			jbd2_journal_put_journal_head(jh);
+		}
+		spin_unlock(&journal->j_list_lock);
+	} else if (jh->b_transaction) {
+		J_ASSERT_JH(jh, (jh->b_transaction ==
+				 journal->j_committing_transaction));
+		/* However, if the buffer is still owned by a prior
+		 * (committing) transaction, we can't drop it yet... */
+		JBUFFER_TRACE(jh, "belongs to older transaction");
+		/* ... but we CAN drop it from the new transaction through
+		 * marking the buffer as freed and set j_next_transaction to
+		 * the new transaction, so that not only the commit code
+		 * knows it should clear dirty bits when it is done with the
+		 * buffer, but also the buffer can be checkpointed only
+		 * after the new transaction commits. */
+
+		set_buffer_freed(bh);
+
+		if (!jh->b_next_transaction) {
+			spin_lock(&journal->j_list_lock);
+			jh->b_next_transaction = transaction;
+			spin_unlock(&journal->j_list_lock);
+		} else {
+			J_ASSERT(jh->b_next_transaction == transaction);
+
+			/*
+			 * only drop a reference if this transaction modified
+			 * the buffer
+			 */
+			if (was_modified)
+				drop_reserve = 1;
+		}
+	} else {
+		/*
+		 * Finally, if the buffer is not belongs to any
+		 * transaction, we can just drop it now if it has no
+		 * checkpoint.
+		 */
+		spin_lock(&journal->j_list_lock);
+		if (!jh->b_cp_transaction) {
+			JBUFFER_TRACE(jh, "belongs to none transaction");
+			spin_unlock(&journal->j_list_lock);
+			goto drop;
+		}
+
+		/*
+		 * Otherwise, if the buffer has been written to disk,
+		 * it is safe to remove the checkpoint and drop it.
+		 */
+		if (jbd2_journal_try_remove_checkpoint(jh) >= 0) {
+			spin_unlock(&journal->j_list_lock);
+			goto drop;
+		}
+
+		/*
+		 * The buffer is still not written to disk, we should
+		 * attach this buffer to current transaction so that the
+		 * buffer can be checkpointed only after the current
+		 * transaction commits.
+		 */
+		clear_buffer_dirty(bh);
+		__jbd2_journal_file_buffer(jh, transaction, BJ_Forget);
+		spin_unlock(&journal->j_list_lock);
+	}
+drop:
+	__brelse(bh);
+	spin_unlock(&jh->b_state_lock);
+	jbd2_journal_put_journal_head(jh);
+	if (drop_reserve) {
+		/* no need to reserve log space for this block -bzzz */
+		handle->h_total_credits++;
+	}
+	return err;
+}
+
+/**
+ * jbd2_journal_stop() - complete a transaction
+ * @handle: transaction to complete.
+ *
+ * All done for a particular handle.
+ *
+ * There is not much action needed here.  We just return any remaining
+ * buffer credits to the transaction and remove the handle.  The only
+ * complication is that we need to start a commit operation if the
+ * filesystem is marked for synchronous update.
+ *
+ * jbd2_journal_stop itself will not usually return an error, but it may
+ * do so in unusual circumstances.  In particular, expect it to
+ * return -EIO if a jbd2_journal_abort has been executed since the
+ * transaction began.
+ */
+int jbd2_journal_stop(handle_t *handle)
+{
+	transaction_t *transaction = handle->h_transaction;
+	journal_t *journal;
+	int err = 0, wait_for_commit = 0;
+	tid_t tid;
+	pid_t pid;
+
+	if (--handle->h_ref > 0) {
+		jbd2_debug(4, "h_ref %d -> %d\n", handle->h_ref + 1,
+						 handle->h_ref);
+		if (is_handle_aborted(handle))
+			return -EIO;
+		return 0;
+	}
+	if (!transaction) {
+		/*
+		 * Handle is already detached from the transaction so there is
+		 * nothing to do other than free the handle.
+		 */
+		memalloc_nofs_restore(handle->saved_alloc_context);
+		goto free_and_exit;
+	}
+	journal = transaction->t_journal;
+	tid = transaction->t_tid;
+
+	if (is_handle_aborted(handle))
+		err = -EIO;
+
+	jbd2_debug(4, "Handle %p going down\n", handle);
+	trace_jbd2_handle_stats(journal->j_fs_dev->bd_dev,
+				tid, handle->h_type, handle->h_line_no,
+				jiffies - handle->h_start_jiffies,
+				handle->h_sync, handle->h_requested_credits,
+				(handle->h_requested_credits -
+				 handle->h_total_credits));
+
+	/*
+	 * Implement synchronous transaction batching.  If the handle
+	 * was synchronous, don't force a commit immediately.  Let's
+	 * yield and let another thread piggyback onto this
+	 * transaction.  Keep doing that while new threads continue to
+	 * arrive.  It doesn't cost much - we're about to run a commit
+	 * and sleep on IO anyway.  Speeds up many-threaded, many-dir
+	 * operations by 30x or more...
+	 *
+	 * We try and optimize the sleep time against what the
+	 * underlying disk can do, instead of having a static sleep
+	 * time.  This is useful for the case where our storage is so
+	 * fast that it is more optimal to go ahead and force a flush
+	 * and wait for the transaction to be committed than it is to
+	 * wait for an arbitrary amount of time for new writers to
+	 * join the transaction.  We achieve this by measuring how
+	 * long it takes to commit a transaction, and compare it with
+	 * how long this transaction has been running, and if run time
+	 * < commit time then we sleep for the delta and commit.  This
+	 * greatly helps super fast disks that would see slowdowns as
+	 * more threads started doing fsyncs.
+	 *
+	 * But don't do this if this process was the most recent one
+	 * to perform a synchronous write.  We do this to detect the
+	 * case where a single process is doing a stream of sync
+	 * writes.  No point in waiting for joiners in that case.
+	 *
+	 * Setting max_batch_time to 0 disables this completely.
+	 */
+	pid = current->pid;
+	if (handle->h_sync && journal->j_last_sync_writer != pid &&
+	    journal->j_max_batch_time) {
+		u64 commit_time, trans_time;
+
+		journal->j_last_sync_writer = pid;
+
+		read_lock(&journal->j_state_lock);
+		commit_time = journal->j_average_commit_time;
+		read_unlock(&journal->j_state_lock);
+
+		trans_time = ktime_to_ns(ktime_sub(ktime_get(),
+						   transaction->t_start_time));
+
+		commit_time = max_t(u64, commit_time,
+				    1000*journal->j_min_batch_time);
+		commit_time = min_t(u64, commit_time,
+				    1000*journal->j_max_batch_time);
+
+		if (trans_time < commit_time) {
+			ktime_t expires = ktime_add_ns(ktime_get(),
+						       commit_time);
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			schedule_hrtimeout(&expires, HRTIMER_MODE_ABS);
+		}
+	}
+
+	if (handle->h_sync)
+		transaction->t_synchronous_commit = 1;
+
+	/*
+	 * If the handle is marked SYNC, we need to set another commit
+	 * going!  We also want to force a commit if the transaction is too
+	 * old now.
+	 */
+	if (handle->h_sync ||
+	    time_after_eq(jiffies, transaction->t_expires)) {
+		/* Do this even for aborted journals: an abort still
+		 * completes the commit thread, it just doesn't write
+		 * anything to disk. */
+
+		jbd2_debug(2, "transaction too old, requesting commit for "
+					"handle %p\n", handle);
+		/* This is non-blocking */
+		jbd2_log_start_commit(journal, tid);
+
+		/*
+		 * Special case: JBD2_SYNC synchronous updates require us
+		 * to wait for the commit to complete.
+		 */
+		if (handle->h_sync && !(current->flags & PF_MEMALLOC))
+			wait_for_commit = 1;
+	}
+
+	/*
+	 * Once stop_this_handle() drops t_updates, the transaction could start
+	 * committing on us and eventually disappear.  So we must not
+	 * dereference transaction pointer again after calling
+	 * stop_this_handle().
+	 */
+	stop_this_handle(handle);
+
+	if (wait_for_commit)
+		err = jbd2_log_wait_commit(journal, tid);
+
+free_and_exit:
+	if (handle->h_rsv_handle)
+		jbd2_free_handle(handle->h_rsv_handle);
+	jbd2_free_handle(handle);
+	return err;
+}
+
+/*
+ *
+ * List management code snippets: various functions for manipulating the
+ * transaction buffer lists.
+ *
+ */
+
+/*
+ * Append a buffer to a transaction list, given the transaction's list head
+ * pointer.
+ *
+ * j_list_lock is held.
+ *
+ * jh->b_state_lock is held.
+ */
+
+static inline void
+__blist_add_buffer(struct journal_head **list, struct journal_head *jh)
+{
+	if (!*list) {
+		jh->b_tnext = jh->b_tprev = jh;
+		*list = jh;
+	} else {
+		/* Insert at the tail of the list to preserve order */
+		struct journal_head *first = *list, *last = first->b_tprev;
+		jh->b_tprev = last;
+		jh->b_tnext = first;
+		last->b_tnext = first->b_tprev = jh;
+	}
+}
+
+/*
+ * Remove a buffer from a transaction list, given the transaction's list
+ * head pointer.
+ *
+ * Called with j_list_lock held, and the journal may not be locked.
+ *
+ * jh->b_state_lock is held.
+ */
+
+static inline void
+__blist_del_buffer(struct journal_head **list, struct journal_head *jh)
+{
+	if (*list == jh) {
+		*list = jh->b_tnext;
+		if (*list == jh)
+			*list = NULL;
+	}
+	jh->b_tprev->b_tnext = jh->b_tnext;
+	jh->b_tnext->b_tprev = jh->b_tprev;
+}
+
+/*
+ * Remove a buffer from the appropriate transaction list.
+ *
+ * Note that this function can *change* the value of
+ * bh->b_transaction->t_buffers, t_forget, t_shadow_list, t_log_list or
+ * t_reserved_list.  If the caller is holding onto a copy of one of these
+ * pointers, it could go bad.  Generally the caller needs to re-read the
+ * pointer from the transaction_t.
+ *
+ * Called under j_list_lock.
+ */
+static void __jbd2_journal_temp_unlink_buffer(struct journal_head *jh)
+{
+	struct journal_head **list = NULL;
+	transaction_t *transaction;
+	struct buffer_head *bh = jh2bh(jh);
+
+	lockdep_assert_held(&jh->b_state_lock);
+	transaction = jh->b_transaction;
+	if (transaction)
+		assert_spin_locked(&transaction->t_journal->j_list_lock);
+
+	J_ASSERT_JH(jh, jh->b_jlist < BJ_Types);
+	if (jh->b_jlist != BJ_None)
+		J_ASSERT_JH(jh, transaction != NULL);
+
+	switch (jh->b_jlist) {
+	case BJ_None:
+		return;
+	case BJ_Metadata:
+		transaction->t_nr_buffers--;
+		J_ASSERT_JH(jh, transaction->t_nr_buffers >= 0);
+		list = &transaction->t_buffers;
+		break;
+	case BJ_Forget:
+		list = &transaction->t_forget;
+		break;
+	case BJ_Shadow:
+		list = &transaction->t_shadow_list;
+		break;
+	case BJ_Reserved:
+		list = &transaction->t_reserved_list;
+		break;
+	}
+
+	__blist_del_buffer(list, jh);
+	jh->b_jlist = BJ_None;
+	if (transaction && is_journal_aborted(transaction->t_journal))
+		clear_buffer_jbddirty(bh);
+	else if (test_clear_buffer_jbddirty(bh))
+		mark_buffer_dirty(bh);	/* Expose it to the VM */
+}
+
+/*
+ * Remove buffer from all transactions. The caller is responsible for dropping
+ * the jh reference that belonged to the transaction.
+ *
+ * Called with bh_state lock and j_list_lock
+ */
+static void __jbd2_journal_unfile_buffer(struct journal_head *jh)
+{
+	J_ASSERT_JH(jh, jh->b_transaction != NULL);
+	J_ASSERT_JH(jh, jh->b_next_transaction == NULL);
+
+	__jbd2_journal_temp_unlink_buffer(jh);
+	jh->b_transaction = NULL;
+}
+
+void jbd2_journal_unfile_buffer(journal_t *journal, struct journal_head *jh)
+{
+	struct buffer_head *bh = jh2bh(jh);
+
+	/* Get reference so that buffer cannot be freed before we unlock it */
+	get_bh(bh);
+	spin_lock(&jh->b_state_lock);
+	spin_lock(&journal->j_list_lock);
+	__jbd2_journal_unfile_buffer(jh);
+	spin_unlock(&journal->j_list_lock);
+	spin_unlock(&jh->b_state_lock);
+	jbd2_journal_put_journal_head(jh);
+	__brelse(bh);
+}
+
+/*
+ * Called from jbd2_journal_try_to_free_buffers().
+ *
+ * Called under jh->b_state_lock
+ */
+static void
+__journal_try_to_free_buffer(journal_t *journal, struct buffer_head *bh)
+{
+	struct journal_head *jh;
+
+	jh = bh2jh(bh);
+
+	if (jh->b_next_transaction != NULL || jh->b_transaction != NULL)
+		return;
+
+	spin_lock(&journal->j_list_lock);
+	/* Remove written-back checkpointed metadata buffer */
+	if (jh->b_cp_transaction != NULL)
+		jbd2_journal_try_remove_checkpoint(jh);
+	spin_unlock(&journal->j_list_lock);
+	return;
+}
+
+/**
+ * jbd2_journal_try_to_free_buffers() - try to free page buffers.
+ * @journal: journal for operation
+ * @folio: Folio to detach data from.
+ *
+ * For all the buffers on this page,
+ * if they are fully written out ordered data, move them onto BUF_CLEAN
+ * so try_to_free_buffers() can reap them.
+ *
+ * This function returns non-zero if we wish try_to_free_buffers()
+ * to be called. We do this if the page is releasable by try_to_free_buffers().
+ * We also do it if the page has locked or dirty buffers and the caller wants
+ * us to perform sync or async writeout.
+ *
+ * This complicates JBD locking somewhat.  We aren't protected by the
+ * BKL here.  We wish to remove the buffer from its committing or
+ * running transaction's ->t_datalist via __jbd2_journal_unfile_buffer.
+ *
+ * This may *change* the value of transaction_t->t_datalist, so anyone
+ * who looks at t_datalist needs to lock against this function.
+ *
+ * Even worse, someone may be doing a jbd2_journal_dirty_data on this
+ * buffer.  So we need to lock against that.  jbd2_journal_dirty_data()
+ * will come out of the lock with the buffer dirty, which makes it
+ * ineligible for release here.
+ *
+ * Who else is affected by this?  hmm...  Really the only contender
+ * is do_get_write_access() - it could be looking at the buffer while
+ * journal_try_to_free_buffer() is changing its state.  But that
+ * cannot happen because we never reallocate freed data as metadata
+ * while the data is part of a transaction.  Yes?
+ *
+ * Return false on failure, true on success
+ */
+bool jbd2_journal_try_to_free_buffers(journal_t *journal, struct folio *folio)
+{
+	struct buffer_head *head;
+	struct buffer_head *bh;
+	bool ret = false;
+
+	J_ASSERT(folio_test_locked(folio));
+
+	head = folio_buffers(folio);
+	bh = head;
+	do {
+		struct journal_head *jh;
+
+		/*
+		 * We take our own ref against the journal_head here to avoid
+		 * having to add tons of locking around each instance of
+		 * jbd2_journal_put_journal_head().
+		 */
+		jh = jbd2_journal_grab_journal_head(bh);
+		if (!jh)
+			continue;
+
+		spin_lock(&jh->b_state_lock);
+		__journal_try_to_free_buffer(journal, bh);
+		spin_unlock(&jh->b_state_lock);
+		jbd2_journal_put_journal_head(jh);
+		if (buffer_jbd(bh))
+			goto busy;
+	} while ((bh = bh->b_this_page) != head);
+
+	ret = try_to_free_buffers(folio);
+busy:
+	return ret;
+}
+
+/*
+ * This buffer is no longer needed.  If it is on an older transaction's
+ * checkpoint list we need to record it on this transaction's forget list
+ * to pin this buffer (and hence its checkpointing transaction) down until
+ * this transaction commits.  If the buffer isn't on a checkpoint list, we
+ * release it.
+ * Returns non-zero if JBD no longer has an interest in the buffer.
+ *
+ * Called under j_list_lock.
+ *
+ * Called under jh->b_state_lock.
+ */
+static int __dispose_buffer(struct journal_head *jh, transaction_t *transaction)
+{
+	int may_free = 1;
+	struct buffer_head *bh = jh2bh(jh);
+
+	if (jh->b_cp_transaction) {
+		JBUFFER_TRACE(jh, "on running+cp transaction");
+		__jbd2_journal_temp_unlink_buffer(jh);
+		/*
+		 * We don't want to write the buffer anymore, clear the
+		 * bit so that we don't confuse checks in
+		 * __journal_file_buffer
+		 */
+		clear_buffer_dirty(bh);
+		__jbd2_journal_file_buffer(jh, transaction, BJ_Forget);
+		may_free = 0;
+	} else {
+		JBUFFER_TRACE(jh, "on running transaction");
+		__jbd2_journal_unfile_buffer(jh);
+		jbd2_journal_put_journal_head(jh);
+	}
+	return may_free;
+}
+
+/*
+ * jbd2_journal_invalidate_folio
+ *
+ * This code is tricky.  It has a number of cases to deal with.
+ *
+ * There are two invariants which this code relies on:
+ *
+ * i_size must be updated on disk before we start calling invalidate_folio
+ * on the data.
+ *
+ *  This is done in ext3 by defining an ext3_setattr method which
+ *  updates i_size before truncate gets going.  By maintaining this
+ *  invariant, we can be sure that it is safe to throw away any buffers
+ *  attached to the current transaction: once the transaction commits,
+ *  we know that the data will not be needed.
+ *
+ *  Note however that we can *not* throw away data belonging to the
+ *  previous, committing transaction!
+ *
+ * Any disk blocks which *are* part of the previous, committing
+ * transaction (and which therefore cannot be discarded immediately) are
+ * not going to be reused in the new running transaction
+ *
+ *  The bitmap committed_data images guarantee this: any block which is
+ *  allocated in one transaction and removed in the next will be marked
+ *  as in-use in the committed_data bitmap, so cannot be reused until
+ *  the next transaction to delete the block commits.  This means that
+ *  leaving committing buffers dirty is quite safe: the disk blocks
+ *  cannot be reallocated to a different file and so buffer aliasing is
+ *  not possible.
+ *
+ *
+ * The above applies mainly to ordered data mode.  In writeback mode we
+ * don't make guarantees about the order in which data hits disk --- in
+ * particular we don't guarantee that new dirty data is flushed before
+ * transaction commit --- so it is always safe just to discard data
+ * immediately in that mode.  --sct
+ */
+
+/*
+ * The journal_unmap_buffer helper function returns zero if the buffer
+ * concerned remains pinned as an anonymous buffer belonging to an older
+ * transaction.
+ *
+ * We're outside-transaction here.  Either or both of j_running_transaction
+ * and j_committing_transaction may be NULL.
+ */
+static int journal_unmap_buffer(journal_t *journal, struct buffer_head *bh,
+				int partial_page)
+{
+	transaction_t *transaction;
+	struct journal_head *jh;
+	int may_free = 1;
+
+	BUFFER_TRACE(bh, "entry");
+
+	/*
+	 * It is safe to proceed here without the j_list_lock because the
+	 * buffers cannot be stolen by try_to_free_buffers as long as we are
+	 * holding the page lock. --sct
+	 */
+
+	jh = jbd2_journal_grab_journal_head(bh);
+	if (!jh)
+		goto zap_buffer_unlocked;
+
+	/* OK, we have data buffer in journaled mode */
+	write_lock(&journal->j_state_lock);
+	spin_lock(&jh->b_state_lock);
+	spin_lock(&journal->j_list_lock);
+
+	/*
+	 * We cannot remove the buffer from checkpoint lists until the
+	 * transaction adding inode to orphan list (let's call it T)
+	 * is committed.  Otherwise if the transaction changing the
+	 * buffer would be cleaned from the journal before T is
+	 * committed, a crash will cause that the correct contents of
+	 * the buffer will be lost.  On the other hand we have to
+	 * clear the buffer dirty bit at latest at the moment when the
+	 * transaction marking the buffer as freed in the filesystem
+	 * structures is committed because from that moment on the
+	 * block can be reallocated and used by a different page.
+	 * Since the block hasn't been freed yet but the inode has
+	 * already been added to orphan list, it is safe for us to add
+	 * the buffer to BJ_Forget list of the newest transaction.
+	 *
+	 * Also we have to clear buffer_mapped flag of a truncated buffer
+	 * because the buffer_head may be attached to the page straddling
+	 * i_size (can happen only when blocksize < pagesize) and thus the
+	 * buffer_head can be reused when the file is extended again. So we end
+	 * up keeping around invalidated buffers attached to transactions'
+	 * BJ_Forget list just to stop checkpointing code from cleaning up
+	 * the transaction this buffer was modified in.
+	 */
+	transaction = jh->b_transaction;
+	if (transaction == NULL) {
+		/* First case: not on any transaction.  If it
+		 * has no checkpoint link, then we can zap it:
+		 * it's a writeback-mode buffer so we don't care
+		 * if it hits disk safely. */
+		if (!jh->b_cp_transaction) {
+			JBUFFER_TRACE(jh, "not on any transaction: zap");
+			goto zap_buffer;
+		}
+
+		if (!buffer_dirty(bh)) {
+			/* bdflush has written it.  We can drop it now */
+			__jbd2_journal_remove_checkpoint(jh);
+			goto zap_buffer;
+		}
+
+		/* OK, it must be in the journal but still not
+		 * written fully to disk: it's metadata or
+		 * journaled data... */
+
+		if (journal->j_running_transaction) {
+			/* ... and once the current transaction has
+			 * committed, the buffer won't be needed any
+			 * longer. */
+			JBUFFER_TRACE(jh, "checkpointed: add to BJ_Forget");
+			may_free = __dispose_buffer(jh,
+					journal->j_running_transaction);
+			goto zap_buffer;
+		} else {
+			/* There is no currently-running transaction. So the
+			 * orphan record which we wrote for this file must have
+			 * passed into commit.  We must attach this buffer to
+			 * the committing transaction, if it exists. */
+			if (journal->j_committing_transaction) {
+				JBUFFER_TRACE(jh, "give to committing trans");
+				may_free = __dispose_buffer(jh,
+					journal->j_committing_transaction);
+				goto zap_buffer;
+			} else {
+				/* The orphan record's transaction has
+				 * committed.  We can cleanse this buffer */
+				clear_buffer_jbddirty(bh);
+				__jbd2_journal_remove_checkpoint(jh);
+				goto zap_buffer;
+			}
+		}
+	} else if (transaction == journal->j_committing_transaction) {
+		JBUFFER_TRACE(jh, "on committing transaction");
+		/*
+		 * The buffer is committing, we simply cannot touch
+		 * it. If the page is straddling i_size we have to wait
+		 * for commit and try again.
+		 */
+		if (partial_page) {
+			spin_unlock(&journal->j_list_lock);
+			spin_unlock(&jh->b_state_lock);
+			write_unlock(&journal->j_state_lock);
+			jbd2_journal_put_journal_head(jh);
+			/* Already zapped buffer? Nothing to do... */
+			if (!bh->b_bdev)
+				return 0;
+			return -EBUSY;
+		}
+		/*
+		 * OK, buffer won't be reachable after truncate. We just clear
+		 * b_modified to not confuse transaction credit accounting, and
+		 * set j_next_transaction to the running transaction (if there
+		 * is one) and mark buffer as freed so that commit code knows
+		 * it should clear dirty bits when it is done with the buffer.
+		 */
+		set_buffer_freed(bh);
+		if (journal->j_running_transaction && buffer_jbddirty(bh))
+			jh->b_next_transaction = journal->j_running_transaction;
+		jh->b_modified = 0;
+		spin_unlock(&journal->j_list_lock);
+		spin_unlock(&jh->b_state_lock);
+		write_unlock(&journal->j_state_lock);
+		jbd2_journal_put_journal_head(jh);
+		return 0;
+	} else {
+		/* Good, the buffer belongs to the running transaction.
+		 * We are writing our own transaction's data, not any
+		 * previous one's, so it is safe to throw it away
+		 * (remember that we expect the filesystem to have set
+		 * i_size already for this truncate so recovery will not
+		 * expose the disk blocks we are discarding here.) */
+		J_ASSERT_JH(jh, transaction == journal->j_running_transaction);
+		JBUFFER_TRACE(jh, "on running transaction");
+		may_free = __dispose_buffer(jh, transaction);
+	}
+
+zap_buffer:
+	/*
+	 * This is tricky. Although the buffer is truncated, it may be reused
+	 * if blocksize < pagesize and it is attached to the page straddling
+	 * EOF. Since the buffer might have been added to BJ_Forget list of the
+	 * running transaction, journal_get_write_access() won't clear
+	 * b_modified and credit accounting gets confused. So clear b_modified
+	 * here.
+	 */
+	jh->b_modified = 0;
+	spin_unlock(&journal->j_list_lock);
+	spin_unlock(&jh->b_state_lock);
+	write_unlock(&journal->j_state_lock);
+	jbd2_journal_put_journal_head(jh);
+zap_buffer_unlocked:
+	clear_buffer_dirty(bh);
+	J_ASSERT_BH(bh, !buffer_jbddirty(bh));
+	clear_buffer_mapped(bh);
+	clear_buffer_req(bh);
+	clear_buffer_new(bh);
+	clear_buffer_delay(bh);
+	clear_buffer_unwritten(bh);
+	bh->b_bdev = NULL;
+	return may_free;
+}
+
+/**
+ * jbd2_journal_invalidate_folio()
+ * @journal: journal to use for flush...
+ * @folio:    folio to flush
+ * @offset:  start of the range to invalidate
+ * @length:  length of the range to invalidate
+ *
+ * Reap page buffers containing data after in the specified range in page.
+ * Can return -EBUSY if buffers are part of the committing transaction and
+ * the page is straddling i_size. Caller then has to wait for current commit
+ * and try again.
+ */
+int jbd2_journal_invalidate_folio(journal_t *journal, struct folio *folio,
+				size_t offset, size_t length)
+{
+	struct buffer_head *head, *bh, *next;
+	unsigned int stop = offset + length;
+	unsigned int curr_off = 0;
+	int partial_page = (offset || length < folio_size(folio));
+	int may_free = 1;
+	int ret = 0;
+
+	if (!folio_test_locked(folio))
+		BUG();
+	head = folio_buffers(folio);
+	if (!head)
+		return 0;
+
+	BUG_ON(stop > folio_size(folio) || stop < length);
+
+	/* We will potentially be playing with lists other than just the
+	 * data lists (especially for journaled data mode), so be
+	 * cautious in our locking. */
+
+	bh = head;
+	do {
+		unsigned int next_off = curr_off + bh->b_size;
+		next = bh->b_this_page;
+
+		if (next_off > stop)
+			return 0;
+
+		if (offset <= curr_off) {
+			/* This block is wholly outside the truncation point */
+			lock_buffer(bh);
+			ret = journal_unmap_buffer(journal, bh, partial_page);
+			unlock_buffer(bh);
+			if (ret < 0)
+				return ret;
+			may_free &= ret;
+		}
+		curr_off = next_off;
+		bh = next;
+
+	} while (bh != head);
+
+	if (!partial_page) {
+		if (may_free && try_to_free_buffers(folio))
+			J_ASSERT(!folio_buffers(folio));
+	}
+	return 0;
+}
+
+/*
+ * File a buffer on the given transaction list.
+ */
+void __jbd2_journal_file_buffer(struct journal_head *jh,
+			transaction_t *transaction, int jlist)
+{
+	struct journal_head **list = NULL;
+	int was_dirty = 0;
+	struct buffer_head *bh = jh2bh(jh);
+
+	lockdep_assert_held(&jh->b_state_lock);
+	assert_spin_locked(&transaction->t_journal->j_list_lock);
+
+	J_ASSERT_JH(jh, jh->b_jlist < BJ_Types);
+	J_ASSERT_JH(jh, jh->b_transaction == transaction ||
+				jh->b_transaction == NULL);
+
+	if (jh->b_transaction && jh->b_jlist == jlist)
+		return;
+
+	if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
+	    jlist == BJ_Shadow || jlist == BJ_Forget) {
+		/*
+		 * For metadata buffers, we track dirty bit in buffer_jbddirty
+		 * instead of buffer_dirty. We should not see a dirty bit set
+		 * here because we clear it in do_get_write_access but e.g.
+		 * tune2fs can modify the sb and set the dirty bit at any time
+		 * so we try to gracefully handle that.
+		 */
+		if (buffer_dirty(bh))
+			warn_dirty_buffer(bh);
+		if (test_clear_buffer_dirty(bh) ||
+		    test_clear_buffer_jbddirty(bh))
+			was_dirty = 1;
+	}
+
+	if (jh->b_transaction)
+		__jbd2_journal_temp_unlink_buffer(jh);
+	else
+		jbd2_journal_grab_journal_head(bh);
+	jh->b_transaction = transaction;
+
+	switch (jlist) {
+	case BJ_None:
+		J_ASSERT_JH(jh, !jh->b_committed_data);
+		J_ASSERT_JH(jh, !jh->b_frozen_data);
+		return;
+	case BJ_Metadata:
+		transaction->t_nr_buffers++;
+		list = &transaction->t_buffers;
+		break;
+	case BJ_Forget:
+		list = &transaction->t_forget;
+		break;
+	case BJ_Shadow:
+		list = &transaction->t_shadow_list;
+		break;
+	case BJ_Reserved:
+		list = &transaction->t_reserved_list;
+		break;
+	}
+
+	__blist_add_buffer(list, jh);
+	jh->b_jlist = jlist;
+
+	if (was_dirty)
+		set_buffer_jbddirty(bh);
+}
+
+void jbd2_journal_file_buffer(struct journal_head *jh,
+				transaction_t *transaction, int jlist)
+{
+	spin_lock(&jh->b_state_lock);
+	spin_lock(&transaction->t_journal->j_list_lock);
+	__jbd2_journal_file_buffer(jh, transaction, jlist);
+	spin_unlock(&transaction->t_journal->j_list_lock);
+	spin_unlock(&jh->b_state_lock);
+}
+
+/*
+ * Remove a buffer from its current buffer list in preparation for
+ * dropping it from its current transaction entirely.  If the buffer has
+ * already started to be used by a subsequent transaction, refile the
+ * buffer on that transaction's metadata list.
+ *
+ * Called under j_list_lock
+ * Called under jh->b_state_lock
+ *
+ * When this function returns true, there's no next transaction to refile to
+ * and the caller has to drop jh reference through
+ * jbd2_journal_put_journal_head().
+ */
+bool __jbd2_journal_refile_buffer(struct journal_head *jh)
+{
+	int was_dirty, jlist;
+	struct buffer_head *bh = jh2bh(jh);
+
+	lockdep_assert_held(&jh->b_state_lock);
+	if (jh->b_transaction)
+		assert_spin_locked(&jh->b_transaction->t_journal->j_list_lock);
+
+	/* If the buffer is now unused, just drop it. */
+	if (jh->b_next_transaction == NULL) {
+		__jbd2_journal_unfile_buffer(jh);
+		return true;
+	}
+
+	/*
+	 * It has been modified by a later transaction: add it to the new
+	 * transaction's metadata list.
+	 */
+
+	was_dirty = test_clear_buffer_jbddirty(bh);
+	__jbd2_journal_temp_unlink_buffer(jh);
+
+	/*
+	 * b_transaction must be set, otherwise the new b_transaction won't
+	 * be holding jh reference
+	 */
+	J_ASSERT_JH(jh, jh->b_transaction != NULL);
+
+	/*
+	 * We set b_transaction here because b_next_transaction will inherit
+	 * our jh reference and thus __jbd2_journal_file_buffer() must not
+	 * take a new one.
+	 */
+	WRITE_ONCE(jh->b_transaction, jh->b_next_transaction);
+	WRITE_ONCE(jh->b_next_transaction, NULL);
+	if (buffer_freed(bh))
+		jlist = BJ_Forget;
+	else if (jh->b_modified)
+		jlist = BJ_Metadata;
+	else
+		jlist = BJ_Reserved;
+	__jbd2_journal_file_buffer(jh, jh->b_transaction, jlist);
+	J_ASSERT_JH(jh, jh->b_transaction->t_state == T_RUNNING);
+
+	if (was_dirty)
+		set_buffer_jbddirty(bh);
+	return false;
+}
+
+/*
+ * __jbd2_journal_refile_buffer() with necessary locking added. We take our
+ * bh reference so that we can safely unlock bh.
+ *
+ * The jh and bh may be freed by this call.
+ */
+void jbd2_journal_refile_buffer(journal_t *journal, struct journal_head *jh)
+{
+	bool drop;
+
+	spin_lock(&jh->b_state_lock);
+	spin_lock(&journal->j_list_lock);
+	drop = __jbd2_journal_refile_buffer(jh);
+	spin_unlock(&jh->b_state_lock);
+	spin_unlock(&journal->j_list_lock);
+	if (drop)
+		jbd2_journal_put_journal_head(jh);
+}
+
+/*
+ * File inode in the inode list of the handle's transaction
+ */
+static int jbd2_journal_file_inode(handle_t *handle, struct jbd2_inode *jinode,
+		unsigned long flags, loff_t start_byte, loff_t end_byte)
+{
+	transaction_t *transaction = handle->h_transaction;
+	journal_t *journal;
+
+	if (is_handle_aborted(handle))
+		return -EROFS;
+	journal = transaction->t_journal;
+
+	jbd2_debug(4, "Adding inode %lu, tid:%d\n", jinode->i_vfs_inode->i_ino,
+			transaction->t_tid);
+
+	spin_lock(&journal->j_list_lock);
+	jinode->i_flags |= flags;
+
+	if (jinode->i_dirty_end) {
+		jinode->i_dirty_start = min(jinode->i_dirty_start, start_byte);
+		jinode->i_dirty_end = max(jinode->i_dirty_end, end_byte);
+	} else {
+		jinode->i_dirty_start = start_byte;
+		jinode->i_dirty_end = end_byte;
+	}
+
+	/* Is inode already attached where we need it? */
+	if (jinode->i_transaction == transaction ||
+	    jinode->i_next_transaction == transaction)
+		goto done;
+
+	/*
+	 * We only ever set this variable to 1 so the test is safe. Since
+	 * t_need_data_flush is likely to be set, we do the test to save some
+	 * cacheline bouncing
+	 */
+	if (!transaction->t_need_data_flush)
+		transaction->t_need_data_flush = 1;
+	/* On some different transaction's list - should be
+	 * the committing one */
+	if (jinode->i_transaction) {
+		J_ASSERT(jinode->i_next_transaction == NULL);
+		J_ASSERT(jinode->i_transaction ==
+					journal->j_committing_transaction);
+		jinode->i_next_transaction = transaction;
+		goto done;
+	}
+	/* Not on any transaction list... */
+	J_ASSERT(!jinode->i_next_transaction);
+	jinode->i_transaction = transaction;
+	list_add(&jinode->i_list, &transaction->t_inode_list);
+done:
+	spin_unlock(&journal->j_list_lock);
+
+	return 0;
+}
+
+int jbd2_journal_inode_ranged_write(handle_t *handle,
+		struct jbd2_inode *jinode, loff_t start_byte, loff_t length)
+{
+	return jbd2_journal_file_inode(handle, jinode,
+			JI_WRITE_DATA | JI_WAIT_DATA, start_byte,
+			start_byte + length - 1);
+}
+
+int jbd2_journal_inode_ranged_wait(handle_t *handle, struct jbd2_inode *jinode,
+		loff_t start_byte, loff_t length)
+{
+	return jbd2_journal_file_inode(handle, jinode, JI_WAIT_DATA,
+			start_byte, start_byte + length - 1);
+}
+
+/*
+ * File truncate and transaction commit interact with each other in a
+ * non-trivial way.  If a transaction writing data block A is
+ * committing, we cannot discard the data by truncate until we have
+ * written them.  Otherwise if we crashed after the transaction with
+ * write has committed but before the transaction with truncate has
+ * committed, we could see stale data in block A.  This function is a
+ * helper to solve this problem.  It starts writeout of the truncated
+ * part in case it is in the committing transaction.
+ *
+ * Filesystem code must call this function when inode is journaled in
+ * ordered mode before truncation happens and after the inode has been
+ * placed on orphan list with the new inode size. The second condition
+ * avoids the race that someone writes new data and we start
+ * committing the transaction after this function has been called but
+ * before a transaction for truncate is started (and furthermore it
+ * allows us to optimize the case where the addition to orphan list
+ * happens in the same transaction as write --- we don't have to write
+ * any data in such case).
+ */
+int jbd2_journal_begin_ordered_truncate(journal_t *journal,
+					struct jbd2_inode *jinode,
+					loff_t new_size)
+{
+	transaction_t *inode_trans, *commit_trans;
+	int ret = 0;
+
+	/* This is a quick check to avoid locking if not necessary */
+	if (!jinode->i_transaction)
+		goto out;
+	/* Locks are here just to force reading of recent values, it is
+	 * enough that the transaction was not committing before we started
+	 * a transaction adding the inode to orphan list */
+	read_lock(&journal->j_state_lock);
+	commit_trans = journal->j_committing_transaction;
+	read_unlock(&journal->j_state_lock);
+	spin_lock(&journal->j_list_lock);
+	inode_trans = jinode->i_transaction;
+	spin_unlock(&journal->j_list_lock);
+	if (inode_trans == commit_trans) {
+		ret = filemap_fdatawrite_range(jinode->i_vfs_inode->i_mapping,
+			new_size, LLONG_MAX);
+		if (ret)
+			jbd2_journal_abort(journal, ret);
+	}
+out:
+	return ret;
+}