Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 1233 insertions, 0 deletions

diff --git a/include/media/davinci/ccdc_types.h b/include/media/davinci/ccdc_types.h
new file mode 100644
index 000000000..971984dc1
--- /dev/null
+++ b/include/media/davinci/ccdc_types.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ **************************************************************************/
+#ifndef _CCDC_TYPES_H
+#define _CCDC_TYPES_H
+enum ccdc_pixfmt {
+	CCDC_PIXFMT_RAW,
+	CCDC_PIXFMT_YCBCR_16BIT,
+	CCDC_PIXFMT_YCBCR_8BIT
+};
+
+enum ccdc_frmfmt {
+	CCDC_FRMFMT_PROGRESSIVE,
+	CCDC_FRMFMT_INTERLACED
+};
+
+/* PIXEL ORDER IN MEMORY from LSB to MSB */
+/* only applicable for 8-bit input mode  */
+enum ccdc_pixorder {
+	CCDC_PIXORDER_YCBYCR,
+	CCDC_PIXORDER_CBYCRY,
+};
+
+enum ccdc_buftype {
+	CCDC_BUFTYPE_FLD_INTERLEAVED,
+	CCDC_BUFTYPE_FLD_SEPARATED
+};
+#endif
diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h
new file mode 100644
index 000000000..e74a93475
--- /dev/null
+++ b/include/media/davinci/vpbe.h
@@ -0,0 +1,184 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ */
+#ifndef _VPBE_H
+#define _VPBE_H
+
+#include <linux/videodev2.h>
+#include <linux/i2c.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_osd.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpbe_types.h>
+
+/* OSD configuration info */
+struct osd_config_info {
+	char module_name[32];
+};
+
+struct vpbe_output {
+	struct v4l2_output output;
+	/*
+	 * If output capabilities include dv_timings, list supported timings
+	 * below
+	 */
+	char *subdev_name;
+	/*
+	 * defualt_mode identifies the default timings set at the venc or
+	 * external encoder.
+	 */
+	char *default_mode;
+	/*
+	 * Fields below are used for supporting multiple modes. For example,
+	 * LCD panel might support different modes and they are listed here.
+	 * Similarly for supporting external encoders, lcd controller port
+	 * requires a set of non-standard timing values to be listed here for
+	 * each supported mode since venc is used in non-standard timing mode
+	 * for interfacing with external encoder similar to configuring lcd
+	 * panel timings
+	 */
+	unsigned int num_modes;
+	struct vpbe_enc_mode_info *modes;
+	/*
+	 * Bus configuration goes here for external encoders. Some encoders
+	 * may require multiple interface types for each of the output. For
+	 * example, SD modes would use YCC8 where as HD mode would use YCC16.
+	 * Not sure if this is needed on a per mode basis instead of per
+	 * output basis. If per mode is needed, we may have to move this to
+	 * mode_info structure
+	 */
+	u32 if_params;
+};
+
+/* encoder configuration info */
+struct encoder_config_info {
+	char module_name[32];
+	/* Is this an i2c device ? */
+	unsigned int is_i2c:1;
+	/* i2c subdevice board info */
+	struct i2c_board_info board_info;
+};
+
+/*amplifier configuration info */
+struct amp_config_info {
+	char module_name[32];
+	/* Is this an i2c device ? */
+	unsigned int is_i2c:1;
+	/* i2c subdevice board info */
+	struct i2c_board_info board_info;
+};
+
+/* structure for defining vpbe display subsystem components */
+struct vpbe_config {
+	char module_name[32];
+	/* i2c bus adapter no */
+	int i2c_adapter_id;
+	struct osd_config_info osd;
+	struct encoder_config_info venc;
+	/* external encoder information goes here */
+	int num_ext_encoders;
+	struct encoder_config_info *ext_encoders;
+	/* amplifier information goes here */
+	struct amp_config_info *amp;
+	unsigned int num_outputs;
+	/* Order is venc outputs followed by LCD and then external encoders */
+	struct vpbe_output *outputs;
+};
+
+struct vpbe_device;
+
+struct vpbe_device_ops {
+	/* Enumerate the outputs */
+	int (*enum_outputs)(struct vpbe_device *vpbe_dev,
+			    struct v4l2_output *output);
+
+	/* Set output to the given index */
+	int (*set_output)(struct vpbe_device *vpbe_dev,
+			 int index);
+
+	/* Get current output */
+	unsigned int (*get_output)(struct vpbe_device *vpbe_dev);
+
+	/* Set DV preset at current output */
+	int (*s_dv_timings)(struct vpbe_device *vpbe_dev,
+			   struct v4l2_dv_timings *dv_timings);
+
+	/* Get DV presets supported at the output */
+	int (*g_dv_timings)(struct vpbe_device *vpbe_dev,
+			   struct v4l2_dv_timings *dv_timings);
+
+	/* Enumerate the DV Presets supported at the output */
+	int (*enum_dv_timings)(struct vpbe_device *vpbe_dev,
+			       struct v4l2_enum_dv_timings *timings_info);
+
+	/* Set std at the output */
+	int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id std_id);
+
+	/* Get the current std at the output */
+	int (*g_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id);
+
+	/* initialize the device */
+	int (*initialize)(struct device *dev, struct vpbe_device *vpbe_dev);
+
+	/* De-initialize the device */
+	void (*deinitialize)(struct device *dev, struct vpbe_device *vpbe_dev);
+
+	/* Get the current mode info */
+	int (*get_mode_info)(struct vpbe_device *vpbe_dev,
+			     struct vpbe_enc_mode_info*);
+
+	/*
+	 * Set the current mode in the encoder. Alternate way of setting
+	 * standard or DV preset or custom timings in the encoder
+	 */
+	int (*set_mode)(struct vpbe_device *vpbe_dev,
+			struct vpbe_enc_mode_info*);
+	/* Power management operations */
+	int (*suspend)(struct vpbe_device *vpbe_dev);
+	int (*resume)(struct vpbe_device *vpbe_dev);
+};
+
+/* struct for vpbe device */
+struct vpbe_device {
+	/* V4l2 device */
+	struct v4l2_device v4l2_dev;
+	/* vpbe dispay controller cfg */
+	struct vpbe_config *cfg;
+	/* parent device */
+	struct device *pdev;
+	/* external encoder v4l2 sub devices */
+	struct v4l2_subdev **encoders;
+	/* current encoder index */
+	int current_sd_index;
+	/* external amplifier v4l2 subdevice */
+	struct v4l2_subdev *amp;
+	struct mutex lock;
+	/* device initialized */
+	int initialized;
+	/* vpbe dac clock */
+	struct clk *dac_clk;
+	/* osd_device pointer */
+	struct osd_state *osd_device;
+	/* venc device pointer */
+	struct venc_platform_data *venc_device;
+	/*
+	 * fields below are accessed by users of vpbe_device. Not the
+	 * ones above
+	 */
+
+	/* current output */
+	int current_out_index;
+	/* lock used by caller to do atomic operation on vpbe device */
+	/* current timings set in the controller */
+	struct vpbe_enc_mode_info current_timings;
+	/* venc sub device */
+	struct v4l2_subdev *venc;
+	/* device operations below */
+	struct vpbe_device_ops ops;
+};
+
+#endif
diff --git a/include/media/davinci/vpbe_display.h b/include/media/davinci/vpbe_display.h
new file mode 100644
index 000000000..d8751ea92
--- /dev/null
+++ b/include/media/davinci/vpbe_display.h
@@ -0,0 +1,122 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#ifndef VPBE_DISPLAY_H
+#define VPBE_DISPLAY_H
+
+/* Header files */
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-fh.h>
+#include <media/videobuf2-v4l2.h>
+#include <media/videobuf2-dma-contig.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe_osd.h>
+#include <media/davinci/vpbe.h>
+
+#define VPBE_DISPLAY_MAX_DEVICES 2
+
+enum vpbe_display_device_id {
+	VPBE_DISPLAY_DEVICE_0,
+	VPBE_DISPLAY_DEVICE_1
+};
+
+#define VPBE_DISPLAY_DRV_NAME	"vpbe-display"
+
+#define VPBE_DISPLAY_MAJOR_RELEASE              1
+#define VPBE_DISPLAY_MINOR_RELEASE              0
+#define VPBE_DISPLAY_BUILD                      1
+#define VPBE_DISPLAY_VERSION_CODE ((VPBE_DISPLAY_MAJOR_RELEASE << 16) | \
+	(VPBE_DISPLAY_MINOR_RELEASE << 8)  | \
+	VPBE_DISPLAY_BUILD)
+
+#define VPBE_DISPLAY_VALID_FIELD(field)   ((V4L2_FIELD_NONE == field) || \
+	 (V4L2_FIELD_ANY == field) || (V4L2_FIELD_INTERLACED == field))
+
+/* Exp ratio numerator and denominator constants */
+#define VPBE_DISPLAY_H_EXP_RATIO_N	9
+#define VPBE_DISPLAY_H_EXP_RATIO_D	8
+#define VPBE_DISPLAY_V_EXP_RATIO_N	6
+#define VPBE_DISPLAY_V_EXP_RATIO_D	5
+
+/* Zoom multiplication factor */
+#define VPBE_DISPLAY_ZOOM_4X	4
+#define VPBE_DISPLAY_ZOOM_2X	2
+
+/* Structures */
+struct display_layer_info {
+	int enable;
+	/* Layer ID used by Display Manager */
+	enum osd_layer id;
+	struct osd_layer_config config;
+	enum osd_zoom_factor h_zoom;
+	enum osd_zoom_factor v_zoom;
+	enum osd_h_exp_ratio h_exp;
+	enum osd_v_exp_ratio v_exp;
+};
+
+struct vpbe_disp_buffer {
+	struct vb2_v4l2_buffer vb;
+	struct list_head list;
+};
+
+/* vpbe display object structure */
+struct vpbe_layer {
+	/* Pointer to the vpbe_display */
+	struct vpbe_display *disp_dev;
+	/* Pointer pointing to current v4l2_buffer */
+	struct vpbe_disp_buffer *cur_frm;
+	/* Pointer pointing to next v4l2_buffer */
+	struct vpbe_disp_buffer *next_frm;
+	/* vb2 specific parameters
+	 * Buffer queue used in vb2
+	 */
+	struct vb2_queue buffer_queue;
+	/* Queue of filled frames */
+	struct list_head dma_queue;
+	/* Used for video buffer handling */
+	spinlock_t irqlock;
+	/* V4l2 specific parameters */
+	/* Identifies video device for this layer */
+	struct video_device video_dev;
+	/* Used to store pixel format */
+	struct v4l2_pix_format pix_fmt;
+	enum v4l2_field buf_field;
+	/* Video layer configuration params */
+	struct display_layer_info layer_info;
+	/* vpbe specific parameters
+	 * enable window for display
+	 */
+	unsigned char window_enable;
+	/* number of open instances of the layer */
+	unsigned int usrs;
+	/* Indicates id of the field which is being displayed */
+	unsigned int field_id;
+	/* Identifies device object */
+	enum vpbe_display_device_id device_id;
+	/* facilitation of ioctl ops lock by v4l2*/
+	struct mutex opslock;
+	u8 layer_first_int;
+};
+
+/* vpbe device structure */
+struct vpbe_display {
+	/* layer specific parameters */
+	/* lock for isr updates to buf layers*/
+	spinlock_t dma_queue_lock;
+	/* C-Plane offset from start of y-plane */
+	unsigned int cbcr_ofst;
+	struct vpbe_layer *dev[VPBE_DISPLAY_MAX_DEVICES];
+	struct vpbe_device *vpbe_dev;
+	struct osd_state *osd_device;
+};
+
+struct buf_config_params {
+	unsigned char min_numbuffers;
+	unsigned char numbuffers[VPBE_DISPLAY_MAX_DEVICES];
+	unsigned int min_bufsize[VPBE_DISPLAY_MAX_DEVICES];
+	unsigned int layer_bufsize[VPBE_DISPLAY_MAX_DEVICES];
+};
+
+#endif	/* VPBE_DISPLAY_H */
diff --git a/include/media/davinci/vpbe_osd.h b/include/media/davinci/vpbe_osd.h
new file mode 100644
index 000000000..a4fc4f2a5
--- /dev/null
+++ b/include/media/davinci/vpbe_osd.h
@@ -0,0 +1,382 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2007-2009 Texas Instruments Inc
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Andy Lowe (alowe@mvista.com), MontaVista Software
+ * - Initial version
+ * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd.
+ * - ported to sub device interface
+ */
+#ifndef _OSD_H
+#define _OSD_H
+
+#include <media/davinci/vpbe_types.h>
+
+#define DM644X_VPBE_OSD_SUBDEV_NAME	"dm644x,vpbe-osd"
+#define DM365_VPBE_OSD_SUBDEV_NAME	"dm365,vpbe-osd"
+#define DM355_VPBE_OSD_SUBDEV_NAME	"dm355,vpbe-osd"
+
+/**
+ * enum osd_layer
+ * @WIN_OSD0: On-Screen Display Window 0
+ * @WIN_VID0: Video Window 0
+ * @WIN_OSD1: On-Screen Display Window 1
+ * @WIN_VID1: Video Window 1
+ *
+ * Description:
+ * An enumeration of the osd display layers.
+ */
+enum osd_layer {
+	WIN_OSD0,
+	WIN_VID0,
+	WIN_OSD1,
+	WIN_VID1,
+};
+
+/**
+ * enum osd_win_layer
+ * @OSDWIN_OSD0: On-Screen Display Window 0
+ * @OSDWIN_OSD1: On-Screen Display Window 1
+ *
+ * Description:
+ * An enumeration of the OSD Window layers.
+ */
+enum osd_win_layer {
+	OSDWIN_OSD0,
+	OSDWIN_OSD1,
+};
+
+/**
+ * enum osd_pix_format
+ * @PIXFMT_1BPP: 1-bit-per-pixel bitmap
+ * @PIXFMT_2BPP: 2-bits-per-pixel bitmap
+ * @PIXFMT_4BPP: 4-bits-per-pixel bitmap
+ * @PIXFMT_8BPP: 8-bits-per-pixel bitmap
+ * @PIXFMT_RGB565: 16-bits-per-pixel RGB565
+ * @PIXFMT_YCBCRI: YUV 4:2:2
+ * @PIXFMT_RGB888: 24-bits-per-pixel RGB888
+ * @PIXFMT_YCRCBI: YUV 4:2:2 with chroma swap
+ * @PIXFMT_NV12: YUV 4:2:0 planar
+ * @PIXFMT_OSD_ATTR: OSD Attribute Window pixel format (4bpp)
+ *
+ * Description:
+ * An enumeration of the DaVinci pixel formats.
+ */
+enum osd_pix_format {
+	PIXFMT_1BPP = 0,
+	PIXFMT_2BPP,
+	PIXFMT_4BPP,
+	PIXFMT_8BPP,
+	PIXFMT_RGB565,
+	PIXFMT_YCBCRI,
+	PIXFMT_RGB888,
+	PIXFMT_YCRCBI,
+	PIXFMT_NV12,
+	PIXFMT_OSD_ATTR,
+};
+
+/**
+ * enum osd_h_exp_ratio
+ * @H_EXP_OFF: no expansion (1/1)
+ * @H_EXP_9_OVER_8: 9/8 expansion ratio
+ * @H_EXP_3_OVER_2: 3/2 expansion ratio
+ *
+ * Description:
+ * An enumeration of the available horizontal expansion ratios.
+ */
+enum osd_h_exp_ratio {
+	H_EXP_OFF,
+	H_EXP_9_OVER_8,
+	H_EXP_3_OVER_2,
+};
+
+/**
+ * enum osd_v_exp_ratio
+ * @V_EXP_OFF: no expansion (1/1)
+ * @V_EXP_6_OVER_5: 6/5 expansion ratio
+ *
+ * Description:
+ * An enumeration of the available vertical expansion ratios.
+ */
+enum osd_v_exp_ratio {
+	V_EXP_OFF,
+	V_EXP_6_OVER_5,
+};
+
+/**
+ * enum osd_zoom_factor
+ * @ZOOM_X1: no zoom (x1)
+ * @ZOOM_X2: x2 zoom
+ * @ZOOM_X4: x4 zoom
+ *
+ * Description:
+ * An enumeration of the available zoom factors.
+ */
+enum osd_zoom_factor {
+	ZOOM_X1,
+	ZOOM_X2,
+	ZOOM_X4,
+};
+
+/**
+ * enum osd_clut
+ * @ROM_CLUT: ROM CLUT
+ * @RAM_CLUT: RAM CLUT
+ *
+ * Description:
+ * An enumeration of the available Color Lookup Tables (CLUTs).
+ */
+enum osd_clut {
+	ROM_CLUT,
+	RAM_CLUT,
+};
+
+/**
+ * enum osd_rom_clut
+ * @ROM_CLUT0: Macintosh CLUT
+ * @ROM_CLUT1: CLUT from DM270 and prior devices
+ *
+ * Description:
+ * An enumeration of the ROM Color Lookup Table (CLUT) options.
+ */
+enum osd_rom_clut {
+	ROM_CLUT0,
+	ROM_CLUT1,
+};
+
+/**
+ * enum osd_blending_factor
+ * @OSD_0_VID_8: OSD pixels are fully transparent
+ * @OSD_1_VID_7: OSD pixels contribute 1/8, video pixels contribute 7/8
+ * @OSD_2_VID_6: OSD pixels contribute 2/8, video pixels contribute 6/8
+ * @OSD_3_VID_5: OSD pixels contribute 3/8, video pixels contribute 5/8
+ * @OSD_4_VID_4: OSD pixels contribute 4/8, video pixels contribute 4/8
+ * @OSD_5_VID_3: OSD pixels contribute 5/8, video pixels contribute 3/8
+ * @OSD_6_VID_2: OSD pixels contribute 6/8, video pixels contribute 2/8
+ * @OSD_8_VID_0: OSD pixels are fully opaque
+ *
+ * Description:
+ * An enumeration of the DaVinci pixel blending factor options.
+ */
+enum osd_blending_factor {
+	OSD_0_VID_8,
+	OSD_1_VID_7,
+	OSD_2_VID_6,
+	OSD_3_VID_5,
+	OSD_4_VID_4,
+	OSD_5_VID_3,
+	OSD_6_VID_2,
+	OSD_8_VID_0,
+};
+
+/**
+ * enum osd_blink_interval
+ * @BLINK_X1: blink interval is 1 vertical refresh cycle
+ * @BLINK_X2: blink interval is 2 vertical refresh cycles
+ * @BLINK_X3: blink interval is 3 vertical refresh cycles
+ * @BLINK_X4: blink interval is 4 vertical refresh cycles
+ *
+ * Description:
+ * An enumeration of the DaVinci pixel blinking interval options.
+ */
+enum osd_blink_interval {
+	BLINK_X1,
+	BLINK_X2,
+	BLINK_X3,
+	BLINK_X4,
+};
+
+/**
+ * enum osd_cursor_h_width
+ * @H_WIDTH_1: horizontal line width is 1 pixel
+ * @H_WIDTH_4: horizontal line width is 4 pixels
+ * @H_WIDTH_8: horizontal line width is 8 pixels
+ * @H_WIDTH_12: horizontal line width is 12 pixels
+ * @H_WIDTH_16: horizontal line width is 16 pixels
+ * @H_WIDTH_20: horizontal line width is 20 pixels
+ * @H_WIDTH_24: horizontal line width is 24 pixels
+ * @H_WIDTH_28: horizontal line width is 28 pixels
+ */
+enum osd_cursor_h_width {
+	H_WIDTH_1,
+	H_WIDTH_4,
+	H_WIDTH_8,
+	H_WIDTH_12,
+	H_WIDTH_16,
+	H_WIDTH_20,
+	H_WIDTH_24,
+	H_WIDTH_28,
+};
+
+/**
+ * enum osd_cursor_v_width
+ * @V_WIDTH_1: vertical line width is 1 line
+ * @V_WIDTH_2: vertical line width is 2 lines
+ * @V_WIDTH_4: vertical line width is 4 lines
+ * @V_WIDTH_6: vertical line width is 6 lines
+ * @V_WIDTH_8: vertical line width is 8 lines
+ * @V_WIDTH_10: vertical line width is 10 lines
+ * @V_WIDTH_12: vertical line width is 12 lines
+ * @V_WIDTH_14: vertical line width is 14 lines
+ */
+enum osd_cursor_v_width {
+	V_WIDTH_1,
+	V_WIDTH_2,
+	V_WIDTH_4,
+	V_WIDTH_6,
+	V_WIDTH_8,
+	V_WIDTH_10,
+	V_WIDTH_12,
+	V_WIDTH_14,
+};
+
+/**
+ * struct osd_cursor_config
+ * @xsize: horizontal size in pixels
+ * @ysize: vertical size in lines
+ * @xpos: horizontal offset in pixels from the left edge of the display
+ * @ypos: vertical offset in lines from the top of the display
+ * @interlaced: Non-zero if the display is interlaced, or zero otherwise
+ * @h_width: horizontal line width
+ * @v_width: vertical line width
+ * @clut: the CLUT selector (ROM or RAM) for the cursor color
+ * @clut_index: an index into the CLUT for the cursor color
+ *
+ * Description:
+ * A structure describing the configuration parameters of the hardware
+ * rectangular cursor.
+ */
+struct osd_cursor_config {
+	unsigned xsize;
+	unsigned ysize;
+	unsigned xpos;
+	unsigned ypos;
+	int interlaced;
+	enum osd_cursor_h_width h_width;
+	enum osd_cursor_v_width v_width;
+	enum osd_clut clut;
+	unsigned char clut_index;
+};
+
+/**
+ * struct osd_layer_config
+ * @pixfmt: pixel format
+ * @line_length: offset in bytes between start of each line in memory
+ * @xsize: number of horizontal pixels displayed per line
+ * @ysize: number of lines displayed
+ * @xpos: horizontal offset in pixels from the left edge of the display
+ * @ypos: vertical offset in lines from the top of the display
+ * @interlaced: Non-zero if the display is interlaced, or zero otherwise
+ *
+ * Description:
+ * A structure describing the configuration parameters of an On-Screen Display
+ * (OSD) or video layer related to how the image is stored in memory.
+ * @line_length must be a multiple of the cache line size (32 bytes).
+ */
+struct osd_layer_config {
+	enum osd_pix_format pixfmt;
+	unsigned line_length;
+	unsigned xsize;
+	unsigned ysize;
+	unsigned xpos;
+	unsigned ypos;
+	int interlaced;
+};
+
+/* parameters that apply on a per-window (OSD or video) basis */
+struct osd_window_state {
+	int is_allocated;
+	int is_enabled;
+	unsigned long fb_base_phys;
+	enum osd_zoom_factor h_zoom;
+	enum osd_zoom_factor v_zoom;
+	struct osd_layer_config lconfig;
+};
+
+/* parameters that apply on a per-OSD-window basis */
+struct osd_osdwin_state {
+	enum osd_clut clut;
+	enum osd_blending_factor blend;
+	int colorkey_blending;
+	unsigned colorkey;
+	int rec601_attenuation;
+	/* index is pixel value */
+	unsigned char palette_map[16];
+};
+
+/* hardware rectangular cursor parameters */
+struct osd_cursor_state {
+	int is_enabled;
+	struct osd_cursor_config config;
+};
+
+struct osd_state;
+
+struct vpbe_osd_ops {
+	int (*initialize)(struct osd_state *sd);
+	int (*request_layer)(struct osd_state *sd, enum osd_layer layer);
+	void (*release_layer)(struct osd_state *sd, enum osd_layer layer);
+	int (*enable_layer)(struct osd_state *sd, enum osd_layer layer,
+			    int otherwin);
+	void (*disable_layer)(struct osd_state *sd, enum osd_layer layer);
+	int (*set_layer_config)(struct osd_state *sd, enum osd_layer layer,
+				struct osd_layer_config *lconfig);
+	void (*get_layer_config)(struct osd_state *sd, enum osd_layer layer,
+				 struct osd_layer_config *lconfig);
+	void (*start_layer)(struct osd_state *sd, enum osd_layer layer,
+			    unsigned long fb_base_phys,
+			    unsigned long cbcr_ofst);
+	void (*set_left_margin)(struct osd_state *sd, u32 val);
+	void (*set_top_margin)(struct osd_state *sd, u32 val);
+	void (*set_interpolation_filter)(struct osd_state *sd, int filter);
+	int (*set_vid_expansion)(struct osd_state *sd,
+					enum osd_h_exp_ratio h_exp,
+					enum osd_v_exp_ratio v_exp);
+	void (*get_vid_expansion)(struct osd_state *sd,
+					enum osd_h_exp_ratio *h_exp,
+					enum osd_v_exp_ratio *v_exp);
+	void (*set_zoom)(struct osd_state *sd, enum osd_layer layer,
+				enum osd_zoom_factor h_zoom,
+				enum osd_zoom_factor v_zoom);
+};
+
+struct osd_state {
+	enum vpbe_version vpbe_type;
+	spinlock_t lock;
+	struct device *dev;
+	dma_addr_t osd_base_phys;
+	void __iomem *osd_base;
+	unsigned long osd_size;
+	/* 1-->the isr will toggle the VID0 ping-pong buffer */
+	int pingpong;
+	int interpolation_filter;
+	int field_inversion;
+	enum osd_h_exp_ratio osd_h_exp;
+	enum osd_v_exp_ratio osd_v_exp;
+	enum osd_h_exp_ratio vid_h_exp;
+	enum osd_v_exp_ratio vid_v_exp;
+	enum osd_clut backg_clut;
+	unsigned backg_clut_index;
+	enum osd_rom_clut rom_clut;
+	int is_blinking;
+	/* attribute window blinking enabled */
+	enum osd_blink_interval blink;
+	/* YCbCrI or YCrCbI */
+	enum osd_pix_format yc_pixfmt;
+	/* columns are Y, Cb, Cr */
+	unsigned char clut_ram[256][3];
+	struct osd_cursor_state cursor;
+	/* OSD0, VID0, OSD1, VID1 */
+	struct osd_window_state win[4];
+	/* OSD0, OSD1 */
+	struct osd_osdwin_state osdwin[2];
+	/* OSD device Operations */
+	struct vpbe_osd_ops ops;
+};
+
+struct osd_platform_data {
+	int  field_inv_wa_enable;
+};
+
+#endif
diff --git a/include/media/davinci/vpbe_types.h b/include/media/davinci/vpbe_types.h
new file mode 100644
index 000000000..6015cda23
--- /dev/null
+++ b/include/media/davinci/vpbe_types.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ */
+#ifndef _VPBE_TYPES_H
+#define _VPBE_TYPES_H
+
+enum vpbe_version {
+	VPBE_VERSION_1 = 1,
+	VPBE_VERSION_2,
+	VPBE_VERSION_3,
+};
+
+/* vpbe_timing_type - Timing types used in vpbe device */
+enum vpbe_enc_timings_type {
+	VPBE_ENC_STD = 0x1,
+	VPBE_ENC_DV_TIMINGS = 0x4,
+	/* Used when set timings through FB device interface */
+	VPBE_ENC_TIMINGS_INVALID = 0x8,
+};
+
+/*
+ * struct vpbe_enc_mode_info
+ * @name: ptr to name string of the standard, "NTSC", "PAL" etc
+ * @std: standard or non-standard mode. 1 - standard, 0 - nonstandard
+ * @interlaced: 1 - interlaced, 0 - non interlaced/progressive
+ * @xres: x or horizontal resolution of the display
+ * @yres: y or vertical resolution of the display
+ * @fps: frame per second
+ * @left_margin: left margin of the display
+ * @right_margin: right margin of the display
+ * @upper_margin: upper margin of the display
+ * @lower_margin: lower margin of the display
+ * @hsync_len: h-sync length
+ * @vsync_len: v-sync length
+ * @flags: bit field: bit usage is documented below
+ *
+ * Description:
+ *  Structure holding timing and resolution information of a standard.
+ * Used by vpbe_device to set required non-standard timing in the
+ * venc when lcd controller output is connected to a external encoder.
+ * A table of timings is maintained in vpbe device to set this in
+ * venc when external encoder is connected to lcd controller output.
+ * Encoder may provide a g_dv_timings() API to override these values
+ * as needed.
+ *
+ *  Notes
+ *  ------
+ *  if_type should be used only by encoder manager and encoder.
+ *  flags usage
+ *     b0 (LSB) - hsync polarity, 0 - negative, 1 - positive
+ *     b1       - vsync polarity, 0 - negative, 1 - positive
+ *     b2       - field id polarity, 0 - negative, 1  - positive
+ */
+struct vpbe_enc_mode_info {
+	unsigned char *name;
+	enum vpbe_enc_timings_type timings_type;
+	v4l2_std_id std_id;
+	struct v4l2_dv_timings dv_timings;
+	unsigned int interlaced;
+	unsigned int xres;
+	unsigned int yres;
+	struct v4l2_fract aspect;
+	struct v4l2_fract fps;
+	unsigned int left_margin;
+	unsigned int right_margin;
+	unsigned int upper_margin;
+	unsigned int lower_margin;
+	unsigned int hsync_len;
+	unsigned int vsync_len;
+	unsigned int flags;
+};
+
+#endif
diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h
new file mode 100644
index 000000000..93cf6a5fb
--- /dev/null
+++ b/include/media/davinci/vpbe_venc.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ */
+#ifndef _VPBE_VENC_H
+#define _VPBE_VENC_H
+
+#include <media/v4l2-subdev.h>
+#include <media/davinci/vpbe_types.h>
+
+#define DM644X_VPBE_VENC_SUBDEV_NAME	"dm644x,vpbe-venc"
+#define DM365_VPBE_VENC_SUBDEV_NAME	"dm365,vpbe-venc"
+#define DM355_VPBE_VENC_SUBDEV_NAME	"dm355,vpbe-venc"
+
+/* venc events */
+#define VENC_END_OF_FRAME	BIT(0)
+#define VENC_FIRST_FIELD	BIT(1)
+#define VENC_SECOND_FIELD	BIT(2)
+
+struct venc_platform_data {
+	int (*setup_pinmux)(u32 if_type, int field);
+	int (*setup_clock)(enum vpbe_enc_timings_type type,
+			   unsigned int pixclock);
+	int (*setup_if_config)(u32 pixcode);
+	/* Number of LCD outputs supported */
+	int num_lcd_outputs;
+	struct vpbe_if_params *lcd_if_params;
+};
+
+enum venc_ioctls {
+	VENC_GET_FLD = 1,
+};
+
+/* exported functions */
+struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev,
+		const char *venc_name);
+#endif
diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h
new file mode 100644
index 000000000..4ad53031e
--- /dev/null
+++ b/include/media/davinci/vpfe_capture.h
@@ -0,0 +1,177 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ */
+
+#ifndef _VPFE_CAPTURE_H
+#define _VPFE_CAPTURE_H
+
+#ifdef __KERNEL__
+
+/* Header files */
+#include <media/v4l2-dev.h>
+#include <linux/videodev2.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf-dma-contig.h>
+#include <media/davinci/vpfe_types.h>
+
+#define VPFE_CAPTURE_NUM_DECODERS        5
+
+/* Macros */
+#define VPFE_MAJOR_RELEASE              0
+#define VPFE_MINOR_RELEASE              0
+#define VPFE_BUILD                      1
+#define VPFE_CAPTURE_VERSION_CODE       ((VPFE_MAJOR_RELEASE << 16) | \
+					(VPFE_MINOR_RELEASE << 8)  | \
+					VPFE_BUILD)
+
+#define CAPTURE_DRV_NAME		"vpfe-capture"
+
+struct vpfe_pixel_format {
+	u32 pixelformat;
+	/* bytes per pixel */
+	int bpp;
+};
+
+struct vpfe_std_info {
+	int active_pixels;
+	int active_lines;
+	/* current frame format */
+	int frame_format;
+};
+
+struct vpfe_route {
+	u32 input;
+	u32 output;
+};
+
+struct vpfe_subdev_info {
+	/* Sub device name */
+	char name[32];
+	/* Sub device group id */
+	int grp_id;
+	/* Number of inputs supported */
+	int num_inputs;
+	/* inputs available at the sub device */
+	struct v4l2_input *inputs;
+	/* Sub dev routing information for each input */
+	struct vpfe_route *routes;
+	/* check if sub dev supports routing */
+	int can_route;
+	/* ccdc bus/interface configuration */
+	struct vpfe_hw_if_param ccdc_if_params;
+	/* i2c subdevice board info */
+	struct i2c_board_info board_info;
+};
+
+struct vpfe_config {
+	/* Number of sub devices connected to vpfe */
+	int num_subdevs;
+	/* i2c bus adapter no */
+	int i2c_adapter_id;
+	/* information about each subdev */
+	struct vpfe_subdev_info *sub_devs;
+	/* evm card info */
+	char *card_name;
+	/* ccdc name */
+	char *ccdc;
+	/* vpfe clock */
+	struct clk *vpssclk;
+	struct clk *slaveclk;
+	/* Function for Clearing the interrupt */
+	void (*clr_intr)(int vdint);
+};
+
+struct vpfe_device {
+	/* V4l2 specific parameters */
+	/* Identifies video device for this channel */
+	struct video_device video_dev;
+	/* sub devices */
+	struct v4l2_subdev **sd;
+	/* vpfe cfg */
+	struct vpfe_config *cfg;
+	/* V4l2 device */
+	struct v4l2_device v4l2_dev;
+	/* parent device */
+	struct device *pdev;
+	/* number of open instances of the channel */
+	u32 usrs;
+	/* Indicates id of the field which is being displayed */
+	u32 field_id;
+	/* flag to indicate whether decoder is initialized */
+	u8 initialized;
+	/* current interface type */
+	struct vpfe_hw_if_param vpfe_if_params;
+	/* ptr to currently selected sub device */
+	struct vpfe_subdev_info *current_subdev;
+	/* current input at the sub device */
+	int current_input;
+	/* Keeps track of the information about the standard */
+	struct vpfe_std_info std_info;
+	/* std index into std table */
+	int std_index;
+	/* CCDC IRQs used when CCDC/ISIF output to SDRAM */
+	unsigned int ccdc_irq0;
+	unsigned int ccdc_irq1;
+	/* number of buffers in fbuffers */
+	u32 numbuffers;
+	/* List of buffer pointers for storing frames */
+	u8 *fbuffers[VIDEO_MAX_FRAME];
+	/* Pointer pointing to current v4l2_buffer */
+	struct videobuf_buffer *cur_frm;
+	/* Pointer pointing to next v4l2_buffer */
+	struct videobuf_buffer *next_frm;
+	/*
+	 * This field keeps track of type of buffer exchange mechanism
+	 * user has selected
+	 */
+	enum v4l2_memory memory;
+	/* Used to store pixel format */
+	struct v4l2_format fmt;
+	/*
+	 * used when IMP is chained to store the crop window which
+	 * is different from the image window
+	 */
+	struct v4l2_rect crop;
+	/* Buffer queue used in video-buf */
+	struct videobuf_queue buffer_queue;
+	/* Queue of filled frames */
+	struct list_head dma_queue;
+	/* Used in video-buf */
+	spinlock_t irqlock;
+	/* IRQ lock for DMA queue */
+	spinlock_t dma_queue_lock;
+	/* lock used to access this structure */
+	struct mutex lock;
+	/* number of users performing IO */
+	u32 io_usrs;
+	/* Indicates whether streaming started */
+	u8 started;
+	/*
+	 * offset where second field starts from the starting of the
+	 * buffer for field separated YCbCr formats
+	 */
+	u32 field_off;
+};
+
+/* File handle structure */
+struct vpfe_fh {
+	struct v4l2_fh fh;
+	struct vpfe_device *vpfe_dev;
+	/* Indicates whether this file handle is doing IO */
+	u8 io_allowed;
+};
+
+struct vpfe_config_params {
+	u8 min_numbuffers;
+	u8 numbuffers;
+	u32 min_bufsize;
+	u32 device_bufsize;
+};
+
+#endif				/* End of __KERNEL__ */
+#endif				/* _DAVINCI_VPFE_H */
diff --git a/include/media/davinci/vpfe_types.h b/include/media/davinci/vpfe_types.h
new file mode 100644
index 000000000..e65c9a48d
--- /dev/null
+++ b/include/media/davinci/vpfe_types.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ */
+#ifndef _VPFE_TYPES_H
+#define _VPFE_TYPES_H
+
+#ifdef __KERNEL__
+
+enum vpfe_pin_pol {
+	VPFE_PINPOL_POSITIVE,
+	VPFE_PINPOL_NEGATIVE
+};
+
+enum vpfe_hw_if_type {
+	/* BT656 - 8 bit */
+	VPFE_BT656,
+	/* BT1120 - 16 bit */
+	VPFE_BT1120,
+	/* Raw Bayer */
+	VPFE_RAW_BAYER,
+	/* YCbCr - 8 bit with external sync */
+	VPFE_YCBCR_SYNC_8,
+	/* YCbCr - 16 bit with external sync */
+	VPFE_YCBCR_SYNC_16,
+	/* BT656 - 10 bit */
+	VPFE_BT656_10BIT
+};
+
+/* interface description */
+struct vpfe_hw_if_param {
+	enum vpfe_hw_if_type if_type;
+	enum vpfe_pin_pol hdpol;
+	enum vpfe_pin_pol vdpol;
+};
+
+#endif
+#endif
diff --git a/include/media/davinci/vpif_types.h b/include/media/davinci/vpif_types.h
new file mode 100644
index 000000000..d03e5c543
--- /dev/null
+++ b/include/media/davinci/vpif_types.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2011 Texas Instruments Inc
+ */
+#ifndef _VPIF_TYPES_H
+#define _VPIF_TYPES_H
+
+#include <linux/i2c.h>
+
+#define VPIF_CAPTURE_MAX_CHANNELS	2
+#define VPIF_DISPLAY_MAX_CHANNELS	2
+
+enum vpif_if_type {
+	VPIF_IF_BT656,
+	VPIF_IF_BT1120,
+	VPIF_IF_RAW_BAYER
+};
+
+struct vpif_interface {
+	enum vpif_if_type if_type;
+	unsigned hd_pol:1;
+	unsigned vd_pol:1;
+	unsigned fid_pol:1;
+};
+
+struct vpif_subdev_info {
+	const char *name;
+	struct i2c_board_info board_info;
+};
+
+struct vpif_output {
+	struct v4l2_output output;
+	const char *subdev_name;
+	u32 input_route;
+	u32 output_route;
+};
+
+struct vpif_display_chan_config {
+	const struct vpif_output *outputs;
+	int output_count;
+	bool clip_en;
+};
+
+struct vpif_display_config {
+	int (*set_clock)(int, int);
+	struct vpif_subdev_info *subdevinfo;
+	int subdev_count;
+	int i2c_adapter_id;
+	struct vpif_display_chan_config chan_config[VPIF_DISPLAY_MAX_CHANNELS];
+	const char *card_name;
+};
+
+struct vpif_input {
+	struct v4l2_input input;
+	char *subdev_name;
+	u32 input_route;
+	u32 output_route;
+};
+
+struct vpif_capture_chan_config {
+	struct vpif_interface vpif_if;
+	struct vpif_input *inputs;
+	int input_count;
+};
+
+struct vpif_capture_config {
+	int (*setup_input_channel_mode)(int);
+	int (*setup_input_path)(int, const char *);
+	struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS];
+	struct vpif_subdev_info *subdev_info;
+	int subdev_count;
+	int i2c_adapter_id;
+	const char *card_name;
+
+	struct v4l2_async_subdev *asd[VPIF_CAPTURE_MAX_CHANNELS];
+	int asd_sizes[VPIF_CAPTURE_MAX_CHANNELS];
+};
+#endif /* _VPIF_TYPES_H */
diff --git a/include/media/davinci/vpss.h b/include/media/davinci/vpss.h
new file mode 100644
index 000000000..315fa77e2
--- /dev/null
+++ b/include/media/davinci/vpss.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2009 Texas Instruments Inc
+ *
+ * vpss - video processing subsystem module header file.
+ *
+ * Include this header file if a driver needs to configure vpss system
+ * module. It exports a set of library functions  for video drivers to
+ * configure vpss system module functions such as clock enable/disable,
+ * vpss interrupt mux to arm, and other common vpss system module
+ * functions.
+ */
+#ifndef _VPSS_H
+#define _VPSS_H
+
+/* selector for ccdc input selection on DM355 */
+enum vpss_ccdc_source_sel {
+	VPSS_CCDCIN,
+	VPSS_HSSIIN,
+	VPSS_PGLPBK,	/* for DM365 only */
+	VPSS_CCDCPG	/* for DM365 only */
+};
+
+struct vpss_sync_pol {
+	unsigned int ccdpg_hdpol:1;
+	unsigned int ccdpg_vdpol:1;
+};
+
+struct vpss_pg_frame_size {
+	short hlpfr;
+	short pplen;
+};
+
+/* Used for enable/disable VPSS Clock */
+enum vpss_clock_sel {
+	/* DM355/DM365 */
+	VPSS_CCDC_CLOCK,
+	VPSS_IPIPE_CLOCK,
+	VPSS_H3A_CLOCK,
+	VPSS_CFALD_CLOCK,
+	/*
+	 * When using VPSS_VENC_CLOCK_SEL in vpss_enable_clock() api
+	 * following applies:-
+	 * en = 0 selects ENC_CLK
+	 * en = 1 selects ENC_CLK/2
+	 */
+	VPSS_VENC_CLOCK_SEL,
+	VPSS_VPBE_CLOCK,
+	/* DM365 only clocks */
+	VPSS_IPIPEIF_CLOCK,
+	VPSS_RSZ_CLOCK,
+	VPSS_BL_CLOCK,
+	/*
+	 * When using VPSS_PCLK_INTERNAL in vpss_enable_clock() api
+	 * following applies:-
+	 * en = 0 disable internal PCLK
+	 * en = 1 enables internal PCLK
+	 */
+	VPSS_PCLK_INTERNAL,
+	/*
+	 * When using VPSS_PSYNC_CLOCK_SEL in vpss_enable_clock() api
+	 * following applies:-
+	 * en = 0 enables MMR clock
+	 * en = 1 enables VPSS clock
+	 */
+	VPSS_PSYNC_CLOCK_SEL,
+	VPSS_LDC_CLOCK_SEL,
+	VPSS_OSD_CLOCK_SEL,
+	VPSS_FDIF_CLOCK,
+	VPSS_LDC_CLOCK
+};
+
+/* select input to ccdc on dm355 */
+int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel);
+/* enable/disable a vpss clock, 0 - success, -1 - failure */
+int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en);
+/* set sync polarity, only for DM365*/
+void dm365_vpss_set_sync_pol(struct vpss_sync_pol);
+/* set the PG_FRAME_SIZE register, only for DM365 */
+void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size);
+
+/* wbl reset for dm644x */
+enum vpss_wbl_sel {
+	VPSS_PCR_AEW_WBL_0 = 16,
+	VPSS_PCR_AF_WBL_0,
+	VPSS_PCR_RSZ4_WBL_0,
+	VPSS_PCR_RSZ3_WBL_0,
+	VPSS_PCR_RSZ2_WBL_0,
+	VPSS_PCR_RSZ1_WBL_0,
+	VPSS_PCR_PREV_WBL_0,
+	VPSS_PCR_CCDC_WBL_O,
+};
+/* clear wbl overflow flag for DM6446 */
+int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel);
+
+/* set sync polarity*/
+void vpss_set_sync_pol(struct vpss_sync_pol sync);
+/* set the PG_FRAME_SIZE register */
+void vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size);
+/*
+ * vpss_check_and_clear_interrupt - check and clear interrupt
+ * @irq - common enumerator for IRQ
+ *
+ * Following return values used:-
+ * 0 - interrupt occurred and cleared
+ * 1 - interrupt not occurred
+ * 2 - interrupt status not available
+ */
+int vpss_dma_complete_interrupt(void);
+
+#endif