Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 198 insertions, 0 deletions

diff --git a/tools/testing/selftests/gpio/gpio-mockup-cdev.c b/tools/testing/selftests/gpio/gpio-mockup-cdev.c
new file mode 100644
index 000000000..d1640f44f
--- /dev/null
+++ b/tools/testing/selftests/gpio/gpio-mockup-cdev.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * GPIO mockup cdev test helper
+ *
+ * Copyright (C) 2020 Kent Gibson
+ */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/ioctl.h>
+#include <linux/gpio.h>
+
+#define CONSUMER	"gpio-mockup-cdev"
+
+static int request_line_v2(int cfd, unsigned int offset,
+			   uint64_t flags, unsigned int val)
+{
+	struct gpio_v2_line_request req;
+	int ret;
+
+	memset(&req, 0, sizeof(req));
+	req.num_lines = 1;
+	req.offsets[0] = offset;
+	req.config.flags = flags;
+	strcpy(req.consumer, CONSUMER);
+	if (flags & GPIO_V2_LINE_FLAG_OUTPUT) {
+		req.config.num_attrs = 1;
+		req.config.attrs[0].mask = 1;
+		req.config.attrs[0].attr.id = GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES;
+		if (val)
+			req.config.attrs[0].attr.values = 1;
+	}
+	ret = ioctl(cfd, GPIO_V2_GET_LINE_IOCTL, &req);
+	if (ret == -1)
+		return -errno;
+	return req.fd;
+}
+
+
+static int get_value_v2(int lfd)
+{
+	struct gpio_v2_line_values vals;
+	int ret;
+
+	memset(&vals, 0, sizeof(vals));
+	vals.mask = 1;
+	ret = ioctl(lfd, GPIO_V2_LINE_GET_VALUES_IOCTL, &vals);
+	if (ret == -1)
+		return -errno;
+	return vals.bits & 0x1;
+}
+
+static int request_line_v1(int cfd, unsigned int offset,
+			   uint32_t flags, unsigned int val)
+{
+	struct gpiohandle_request req;
+	int ret;
+
+	memset(&req, 0, sizeof(req));
+	req.lines = 1;
+	req.lineoffsets[0] = offset;
+	req.flags = flags;
+	strcpy(req.consumer_label, CONSUMER);
+	if (flags & GPIOHANDLE_REQUEST_OUTPUT)
+		req.default_values[0] = val;
+
+	ret = ioctl(cfd, GPIO_GET_LINEHANDLE_IOCTL, &req);
+	if (ret == -1)
+		return -errno;
+	return req.fd;
+}
+
+static int get_value_v1(int lfd)
+{
+	struct gpiohandle_data vals;
+	int ret;
+
+	memset(&vals, 0, sizeof(vals));
+	ret = ioctl(lfd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, &vals);
+	if (ret == -1)
+		return -errno;
+	return vals.values[0];
+}
+
+static void usage(char *prog)
+{
+	printf("Usage: %s [-l] [-b <bias>] [-s <value>] [-u <uAPI>] <gpiochip> <offset>\n", prog);
+	printf("        -b: set line bias to one of pull-down, pull-up, disabled\n");
+	printf("               (default is to leave bias unchanged):\n");
+	printf("        -l: set line active low (default is active high)\n");
+	printf("        -s: set line value (default is to get line value)\n");
+	printf("        -u: uAPI version to use (default is 2)\n");
+	exit(-1);
+}
+
+static int wait_signal(void)
+{
+	int sig;
+	sigset_t wset;
+
+	sigemptyset(&wset);
+	sigaddset(&wset, SIGHUP);
+	sigaddset(&wset, SIGINT);
+	sigaddset(&wset, SIGTERM);
+	sigwait(&wset, &sig);
+
+	return sig;
+}
+
+int main(int argc, char *argv[])
+{
+	char *chip;
+	int opt, ret, cfd, lfd;
+	unsigned int offset, val = 0, abiv;
+	uint32_t flags_v1;
+	uint64_t flags_v2;
+
+	abiv = 2;
+	ret = 0;
+	flags_v1 = GPIOHANDLE_REQUEST_INPUT;
+	flags_v2 = GPIO_V2_LINE_FLAG_INPUT;
+
+	while ((opt = getopt(argc, argv, "lb:s:u:")) != -1) {
+		switch (opt) {
+		case 'l':
+			flags_v1 |= GPIOHANDLE_REQUEST_ACTIVE_LOW;
+			flags_v2 |= GPIO_V2_LINE_FLAG_ACTIVE_LOW;
+			break;
+		case 'b':
+			if (strcmp("pull-up", optarg) == 0) {
+				flags_v1 |= GPIOHANDLE_REQUEST_BIAS_PULL_UP;
+				flags_v2 |= GPIO_V2_LINE_FLAG_BIAS_PULL_UP;
+			} else if (strcmp("pull-down", optarg) == 0) {
+				flags_v1 |= GPIOHANDLE_REQUEST_BIAS_PULL_DOWN;
+				flags_v2 |= GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN;
+			} else if (strcmp("disabled", optarg) == 0) {
+				flags_v1 |= GPIOHANDLE_REQUEST_BIAS_DISABLE;
+				flags_v2 |= GPIO_V2_LINE_FLAG_BIAS_DISABLED;
+			}
+			break;
+		case 's':
+			val = atoi(optarg);
+			flags_v1 &= ~GPIOHANDLE_REQUEST_INPUT;
+			flags_v1 |= GPIOHANDLE_REQUEST_OUTPUT;
+			flags_v2 &= ~GPIO_V2_LINE_FLAG_INPUT;
+			flags_v2 |= GPIO_V2_LINE_FLAG_OUTPUT;
+			break;
+		case 'u':
+			abiv = atoi(optarg);
+			break;
+		default:
+			usage(argv[0]);
+		}
+	}
+
+	if (argc < optind + 2)
+		usage(argv[0]);
+
+	chip = argv[optind];
+	offset = atoi(argv[optind + 1]);
+
+	cfd = open(chip, 0);
+	if (cfd == -1) {
+		fprintf(stderr, "Failed to open %s: %s\n", chip, strerror(errno));
+		return -errno;
+	}
+
+	if (abiv == 1)
+		lfd = request_line_v1(cfd, offset, flags_v1, val);
+	else
+		lfd = request_line_v2(cfd, offset, flags_v2, val);
+
+	close(cfd);
+
+	if (lfd < 0) {
+		fprintf(stderr, "Failed to request %s:%d: %s\n", chip, offset, strerror(-lfd));
+		return lfd;
+	}
+
+	if (flags_v2 & GPIO_V2_LINE_FLAG_OUTPUT) {
+		wait_signal();
+	} else {
+		if (abiv == 1)
+			ret = get_value_v1(lfd);
+		else
+			ret = get_value_v2(lfd);
+	}
+
+	close(lfd);
+
+	return ret;
+}