diff options
Diffstat (limited to '')
90 files changed, 9244 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-class b/Documentation/ABI/testing/sysfs-class new file mode 100644 index 000000000..676530fcf --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class @@ -0,0 +1,16 @@ +What: /sys/class/ +Date: Febuary 2006 +Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +Description: + The /sys/class directory will consist of a group of + subdirectories describing individual classes of devices + in the kernel. The individual directories will consist + of either subdirectories, or symlinks to other + directories. + + All programs that use this directory tree must be able + to handle both subdirectories or symlinks in order to + work properly. + +Users: + udev <linux-hotplug-devel@lists.sourceforge.net> diff --git a/Documentation/ABI/testing/sysfs-class-backlight b/Documentation/ABI/testing/sysfs-class-backlight new file mode 100644 index 000000000..c453646b0 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-backlight @@ -0,0 +1,186 @@ +What: /sys/class/backlight/<backlight>/scale +Date: July 2019 +KernelVersion: 5.4 +Contact: Daniel Thompson <daniel.thompson@linaro.org> +Description: + Description of the scale of the brightness curve. + + The human eye senses brightness approximately logarithmically, + hence linear changes in brightness are perceived as being + non-linear. To achieve a linear perception of brightness changes + controls like sliders need to apply a logarithmic mapping for + backlights with a linear brightness curve. + + Possible values of the attribute are: + + unknown + The scale of the brightness curve is unknown. + + linear + The brightness changes linearly with each step. Brightness + controls should apply a logarithmic mapping for a linear + perception. + + non-linear + The brightness changes non-linearly with each step. Brightness + controls should use a linear mapping for a linear perception. + +What: /sys/class/backlight/<backlight>/ambient_light_level +Date: Apr, 2010 +KernelVersion: v2.6.35 +Contact: Michael Hennerich <michael.hennerich@analog.com> +Description: + (RO) Get conversion value of the light sensor. + + The value is automatically updated every 80 ms when the + light sensor is enabled. + + The value range is device-driver specific: + + For ADP8870: + + It returns integer between 0 (dark) and 8000 (max ambient + brightness). + + For ADP8860: + + It returns a 13-bits integer. + +What: /sys/class/backlight/<backlight>/ambient_light_zone +Date: Apr, 2010 +KernelVersion: v2.6.35 +Contact: Michael Hennerich <michael.hennerich@analog.com>, + device-drivers-devel@blackfin.uclinux.org + +Description: + (RW) Read or write the specific brightness level at which the + backlight operates. + + The value meaning is device-driver specific: + + For ADP8860: + + == ========================== + 0 Off: Backlight set to 0 mA + 1 Level 1: daylight + 2 Level 2: bright + 3 Level 3: dark + == ========================== + + For ADP8870: + + == ========================== + 0 Off: Backlight set to 0 mA + 1 Level 1: daylight + 2 Level 2: bright + 3 Level 3: office + 4 Level 4: indoor + 5 Level 5: dark + == ========================== + + Writing 0 returns to normal/automatic ambient light level + operation. + + It can be enabled by writing the value stored in + /sys/class/backlight/<backlight>/max_brightness to + /sys/class/backlight/<backlight>/brightness. + +What: /sys/class/backlight/<backlight>/<ambient light zone>_max +Date: Sep, 2009 +KernelVersion: v2.6.32 +Contact: device-drivers-devel@blackfin.uclinux.org +Description: + Control the maximum brightness for <ambient light zone> + on this <backlight>. Values are between 0 and 127. This file + will also show the brightness level stored for this + <ambient light zone>. + + The <ambient light zone> is device-driver specific: + + For ADP5520 and ADP5501, <ambient light zone> can be: + + =========== ================================================ + Ambient sysfs entry + light zone + =========== ================================================ + daylight /sys/class/backlight/<backlight>/daylight_max + office /sys/class/backlight/<backlight>/office_max + dark /sys/class/backlight/<backlight>/dark_max + =========== ================================================ + + For ADP8860, <ambient light zone> can be: + + =========== ================================================ + Ambient sysfs entry + light zone + =========== ================================================ + l1_daylight /sys/class/backlight/<backlight>/l1_daylight_max + l2_office /sys/class/backlight/<backlight>/l2_office_max + l3_dark /sys/class/backlight/<backlight>/l3_dark_max + =========== ================================================ + + For ADP8870, <ambient light zone> can be: + + =========== ================================================ + Ambient sysfs entry + light zone + =========== ================================================ + l1_daylight /sys/class/backlight/<backlight>/l1_daylight_max + l2_bright /sys/class/backlight/<backlight>/l2_bright_max + l3_office /sys/class/backlight/<backlight>/l3_office_max + l4_indoor /sys/class/backlight/<backlight>/l4_indoor_max + l5_dark /sys/class/backlight/<backlight>/l5_dark_max + =========== ================================================ + + See also: /sys/class/backlight/<backlight>/ambient_light_zone. + +What: /sys/class/backlight/<backlight>/<ambient light zone>_dim +Date: Sep, 2009 +KernelVersion: v2.6.32 +Contact: device-drivers-devel@blackfin.uclinux.org +Description: + Control the dim brightness for <ambient light zone> + on this <backlight>. Values are between 0 and 127, typically + set to 0. Full off when the backlight is disabled. + This file will also show the dim brightness level stored for + this <ambient light zone>. + + The <ambient light zone> is device-driver specific: + + For ADP5520 and ADP5501, <ambient light zone> can be: + + =========== ================================================ + Ambient sysfs entry + light zone + =========== ================================================ + daylight /sys/class/backlight/<backlight>/daylight_dim + office /sys/class/backlight/<backlight>/office_dim + dark /sys/class/backlight/<backlight>/dark_dim + =========== ================================================ + + For ADP8860, <ambient light zone> can be: + + =========== ================================================ + Ambient sysfs entry + light zone + =========== ================================================ + l1_daylight /sys/class/backlight/<backlight>/l1_daylight_dim + l2_office /sys/class/backlight/<backlight>/l2_office_dim + l3_dark /sys/class/backlight/<backlight>/l3_dark_dim + =========== ================================================ + + For ADP8870, <ambient light zone> can be: + + =========== ================================================ + Ambient sysfs entry + light zone + =========== ================================================ + l1_daylight /sys/class/backlight/<backlight>/l1_daylight_dim + l2_bright /sys/class/backlight/<backlight>/l2_bright_dim + l3_office /sys/class/backlight/<backlight>/l3_office_dim + l4_indoor /sys/class/backlight/<backlight>/l4_indoor_dim + l5_dark /sys/class/backlight/<backlight>/l5_dark_dim + =========== ================================================ + + See also: /sys/class/backlight/<backlight>/ambient_light_zone. + diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 b/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 new file mode 100644 index 000000000..8251e78ab --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 @@ -0,0 +1,54 @@ +What: /sys/class/backlight/<backlight>/als_channel +Date: May 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Get the ALS output channel used as input in + ALS-current-control mode (0, 1), where: + + == ========================== + 0 out_current0 (backlight 0) + 1 out_current1 (backlight 1) + == ========================== + +What: /sys/class/backlight/<backlight>/als_en +Date: May 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Enable ALS-current-control mode (0, 1). + +What: /sys/class/backlight/<backlight>/id +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Get the id of this backlight (0, 1). + +What: /sys/class/backlight/<backlight>/linear +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the brightness-mapping mode (0, 1), where: + + == ================ + 0 exponential mode + 1 linear mode + == ================ + +What: /sys/class/backlight/<backlight>/pwm +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the PWM-input control mask (5 bits), where: + + ===== =========================== + bit 5 PWM-input enabled in Zone 4 + bit 4 PWM-input enabled in Zone 3 + bit 3 PWM-input enabled in Zone 2 + bit 2 PWM-input enabled in Zone 1 + bit 1 PWM-input enabled in Zone 0 + bit 0 PWM-input enabled + ===== =========================== diff --git a/Documentation/ABI/testing/sysfs-class-backlight-lm3639 b/Documentation/ABI/testing/sysfs-class-backlight-lm3639 new file mode 100644 index 000000000..f7e92a82e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-backlight-lm3639 @@ -0,0 +1,11 @@ +sysfs interface for Texas Instruments lm3639 backlight + flash led driver chip +------------------------------------------------------------------------------ + +What: /sys/class/backlight/<backlight>/bled_mode +Date: Oct, 2012 +KernelVersion: v3.10 +Contact: dri-devel@lists.freedesktop.org +Description: + (WO) Write to the backlight mapping mode. The backlight current + can be mapped for either exponential (value "0") or linear + mapping modes (default). diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi new file mode 100644 index 000000000..6d2a2fc18 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-bdi @@ -0,0 +1,66 @@ +What: /sys/class/bdi/<bdi>/ +Date: January 2008 +Contact: Peter Zijlstra <a.p.zijlstra@chello.nl> +Description: + +Provide a place in sysfs for the backing_dev_info object. This allows +setting and retrieving various BDI specific variables. + +The <bdi> identifier can be either of the following: + +MAJOR:MINOR + + Device number for block devices, or value of st_dev on + non-block filesystems which provide their own BDI, such as NFS + and FUSE. + +MAJOR:MINOR-fuseblk + + Value of st_dev on fuseblk filesystems. + +default + + The default backing dev, used for non-block device backed + filesystems which do not provide their own BDI. + +What: /sys/class/bdi/<bdi>/read_ahead_kb +Date: January 2008 +Contact: Peter Zijlstra <a.p.zijlstra@chello.nl> +Description: + Size of the read-ahead window in kilobytes + + (read-write) +What: /sys/class/bdi/<bdi>/min_ratio +Date: January 2008 +Contact: Peter Zijlstra <a.p.zijlstra@chello.nl> +Description: + Under normal circumstances each device is given a part of the + total write-back cache that relates to its current average + writeout speed in relation to the other devices. + + The 'min_ratio' parameter allows assigning a minimum + percentage of the write-back cache to a particular device. + For example, this is useful for providing a minimum QoS. + + (read-write) + +What: /sys/class/bdi/<bdi>/max_ratio +Date: January 2008 +Contact: Peter Zijlstra <a.p.zijlstra@chello.nl> +Description: + Allows limiting a particular device to use not more than the + given percentage of the write-back cache. This is useful in + situations where we want to avoid one device taking all or + most of the write-back cache. For example in case of an NFS + mount that is prone to get stuck, or a FUSE mount which cannot + be trusted to play fair. + + (read-write) +What: /sys/class/bdi/<bdi>/stable_pages_required +Date: January 2008 +Contact: Peter Zijlstra <a.p.zijlstra@chello.nl> +Description: + If set, the backing device requires that all pages comprising a write + request must not be changed until writeout is complete. + + (read-only) diff --git a/Documentation/ABI/testing/sysfs-class-bsr b/Documentation/ABI/testing/sysfs-class-bsr new file mode 100644 index 000000000..7bf145d32 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-bsr @@ -0,0 +1,25 @@ +What: /sys/class/bsr/bsr*/bsr_size +Date: Jul, 2008 +KernelVersion: 2.6.27 +Contact: Arnd Bergmann <arnd@arndb.de>, + Greg Kroah-Hartman <gregkh@linuxfoundation.org> +Description: + (RO) Size of the barrier-synchronization register (BSR) + register in bytes. + +What: /sys/class/bsr/bsr*/bsr_length +Date: Jul, 2008 +KernelVersion: 2.6.27 +Contact: Arnd Bergmann <arnd@arndb.de>, + Greg Kroah-Hartman <gregkh@linuxfoundation.org> +Description: + (RO) The length of memory region that can be mapped in bytes. + +What: /sys/class/bsr/bsr*/bsr_stride +Date: Jul, 2008 +KernelVersion: 2.6.27 +Contact: Arnd Bergmann <arnd@arndb.de>, + Greg Kroah-Hartman <gregkh@linuxfoundation.org> +Description: + (RO) The stride or the interval at which the allocated BSR bytes + repeat within the mapping. diff --git a/Documentation/ABI/testing/sysfs-class-chromeos b/Documentation/ABI/testing/sysfs-class-chromeos new file mode 100644 index 000000000..74ece9427 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-chromeos @@ -0,0 +1,33 @@ +What: /sys/class/chromeos/<ec-device-name>/flashinfo +Date: August 2015 +KernelVersion: 4.2 +Description: + Show the EC flash information. + +What: /sys/class/chromeos/<ec-device-name>/kb_wake_angle +Date: March 2018 +KernelVersion: 4.17 +Description: + Control the keyboard wake lid angle. Values are between + 0 and 360. This file will also show the keyboard wake lid + angle by querying the hardware. + +What: /sys/class/chromeos/<ec-device-name>/reboot +Date: August 2015 +KernelVersion: 4.2 +Description: + Tell the EC to reboot in various ways. Options are: + + - "cancel": Cancel a pending reboot. + - "ro": Jump to RO without rebooting. + - "rw": Jump to RW without rebooting. + - "cold": Cold reboot. + - "disable-jump": Disable jump until next reboot. + - "hibernate": Hibernate the EC. + - "at-shutdown": Reboot after an AP shutdown. + +What: /sys/class/chromeos/<ec-device-name>/version +Date: August 2015 +KernelVersion: 4.2 +Description: + Show the information about the EC software and hardware. diff --git a/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-lightbar b/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-lightbar new file mode 100644 index 000000000..57a037791 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-lightbar @@ -0,0 +1,74 @@ +What: /sys/class/chromeos/<ec-device-name>/lightbar/brightness +Date: August 2015 +KernelVersion: 4.2 +Description: + Writing to this file adjusts the overall brightness of + the lightbar, separate from any color intensity. The + valid range is 0 (off) to 255 (maximum brightness). + +What: /sys/class/chromeos/<ec-device-name>/lightbar/interval_msec +Date: August 2015 +KernelVersion: 4.2 +Description: + The lightbar is controlled by an embedded controller (EC), + which also manages the keyboard, battery charging, fans, + and other system hardware. To prevent unprivileged users + from interfering with the other EC functions, the rate at + which the lightbar control files can be read or written is + limited. + + Reading this file will return the number of milliseconds + that must elapse between accessing any of the lightbar + functions through this interface. Going faster will simply + block until the necessary interval has lapsed. The interval + applies uniformly to all accesses of any kind by any user. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/led_rgb +Date: August 2015 +KernelVersion: 4.2 +Description: + This allows you to control each LED segment. If the + lightbar is already running one of the automatic + sequences, you probably won’t see anything change because + your color setting will be almost immediately replaced. + To get useful results, you should stop the lightbar + sequence first. + + The values written to this file are sets of four integers, + indicating LED, RED, GREEN, BLUE. The LED number is 0 to 3 + to select a single segment, or 4 to set all four segments + to the same value at once. The RED, GREEN, and BLUE + numbers should be in the range 0 (off) to 255 (maximum). + You can update more than one segment at a time by writing + more than one set of four integers. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/program +Date: August 2015 +KernelVersion: 4.2 +Description: + This allows you to upload and run custom lightbar sequences. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/sequence +Date: August 2015 +KernelVersion: 4.2 +Description: + The Pixel lightbar has a number of built-in sequences + that it displays under various conditions, such as at + power on, shut down, or while running. Reading from this + file displays the current sequence that the lightbar is + displaying. Writing to this file allows you to change the + sequence. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/userspace_control +Date: August 2015 +KernelVersion: 4.2 +Description: + This allows you to take the control of the lightbar. This + prevents the kernel from going through its normal + sequences. + +What: /sys/class/chromeos/<ec-device-name>/lightbar/version +Date: August 2015 +KernelVersion: 4.2 +Description: + Show the information about the lightbar version. diff --git a/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-vbc b/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-vbc new file mode 100644 index 000000000..38c5aaaaa --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-vbc @@ -0,0 +1,6 @@ +What: /sys/class/chromeos/<ec-device-name>/vbc/vboot_context +Date: October 2015 +KernelVersion: 4.4 +Description: + Read/write the verified boot context data included on a + small nvram space on some EC implementations. diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl new file mode 100644 index 000000000..594fda254 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-cxl @@ -0,0 +1,270 @@ +Please note that attributes that are shared between devices are stored in +the directory pointed to by the symlink device/. +For example, the real path of the attribute /sys/class/cxl/afu0.0s/irqs_max is +/sys/class/cxl/afu0.0s/device/irqs_max, i.e. /sys/class/cxl/afu0.0/irqs_max. + + +Slave contexts (eg. /sys/class/cxl/afu0.0s): + +What: /sys/class/cxl/<afu>/afu_err_buf +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + AFU Error Buffer contents. The contents of this file are + application specific and depends on the AFU being used. + Applications interacting with the AFU can use this attribute + to know about the current error condition and take appropriate + action like logging the event etc. + + +What: /sys/class/cxl/<afu>/irqs_max +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read/write + Decimal value of maximum number of interrupts that can be + requested by userspace. The default on probe is the maximum + that hardware can support (eg. 2037). Write values will limit + userspace applications to that many userspace interrupts. Must + be >= irqs_min. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<afu>/irqs_min +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Decimal value of the minimum number of interrupts that + userspace must request on a CXL_START_WORK ioctl. Userspace may + omit the num_interrupts field in the START_WORK IOCTL to get + this minimum automatically. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<afu>/mmio_size +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Decimal value of the size of the MMIO space that may be mmaped + by userspace. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<afu>/modes_supported +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + List of the modes this AFU supports. One per line. + Valid entries are: "dedicated_process" and "afu_directed" +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<afu>/mode +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read/write + The current mode the AFU is using. Will be one of the modes + given in modes_supported. Writing will change the mode + provided that no user contexts are attached. +Users: https://github.com/ibm-capi/libcxl + + +What: /sys/class/cxl/<afu>/prefault_mode +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read/write + Set the mode for prefaulting in segments into the segment table + when performing the START_WORK ioctl. Only applicable when + running under hashed page table mmu. + Possible values: + + ======================= ====================================== + none No prefaulting (default) + work_element_descriptor Treat the work element + descriptor as an effective address and + prefault what it points to. + all all segments process calling + START_WORK maps. + ======================= ====================================== + +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<afu>/reset +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: write only + Writing 1 here will reset the AFU provided there are not + contexts active on the AFU. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<afu>/api_version +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Decimal value of the current version of the kernel/user API. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<afu>/api_version_compatible +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Decimal value of the lowest version of the userspace API + this kernel supports. +Users: https://github.com/ibm-capi/libcxl + + +AFU configuration records (eg. /sys/class/cxl/afu0.0/cr0): + +An AFU may optionally export one or more PCIe like configuration records, known +as AFU configuration records, which will show up here (if present). + +What: /sys/class/cxl/<afu>/cr<config num>/vendor +Date: February 2015 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Hexadecimal value of the vendor ID found in this AFU + configuration record. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<afu>/cr<config num>/device +Date: February 2015 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Hexadecimal value of the device ID found in this AFU + configuration record. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<afu>/cr<config num>/class +Date: February 2015 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Hexadecimal value of the class code found in this AFU + configuration record. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<afu>/cr<config num>/config +Date: February 2015 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + This binary file provides raw access to the AFU configuration + record. The format is expected to match the either the standard + or extended configuration space defined by the PCIe + specification. +Users: https://github.com/ibm-capi/libcxl + + + +Master contexts (eg. /sys/class/cxl/afu0.0m) + +What: /sys/class/cxl/<afu>m/mmio_size +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Decimal value of the size of the MMIO space that may be mmaped + by userspace. This includes all slave contexts space also. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<afu>m/pp_mmio_len +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Decimal value of the Per Process MMIO space length. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<afu>m/pp_mmio_off +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + (not in a guest) + Decimal value of the Per Process MMIO space offset. +Users: https://github.com/ibm-capi/libcxl + + +Card info (eg. /sys/class/cxl/card0) + +What: /sys/class/cxl/<card>/caia_version +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Identifies the CAIA Version the card implements. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<card>/psl_revision +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Identifies the revision level of the PSL. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<card>/base_image +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + (not in a guest) + Identifies the revision level of the base image for devices + that support loadable PSLs. For FPGAs this field identifies + the image contained in the on-adapter flash which is loaded + during the initial program load. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<card>/image_loaded +Date: September 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + (not in a guest) + Will return "user" or "factory" depending on the image loaded + onto the card. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<card>/load_image_on_perst +Date: December 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read/write + (not in a guest) + Valid entries are "none", "user", and "factory". + "none" means PERST will not cause image to be loaded to the + card. A power cycle is required to load the image. + "none" could be useful for debugging because the trace arrays + are preserved. + + "user" and "factory" means PERST will cause either the user or + user or factory image to be loaded. + Default is to reload on PERST whichever image the card has + loaded. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<card>/reset +Date: October 2014 +Contact: linuxppc-dev@lists.ozlabs.org +Description: write only + Writing 1 will issue a PERST to card provided there are no + contexts active on any one of the card AFUs. This may cause + the card to reload the FPGA depending on load_image_on_perst. + Writing -1 will do a force PERST irrespective of any active + contexts on the card AFUs. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<card>/perst_reloads_same_image +Date: July 2015 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read/write + (not in a guest) + Trust that when an image is reloaded via PERST, it will not + have changed. + + == ================================================= + 0 don't trust, the image may be different (default) + 1 trust that the image will not change. + == ================================================= +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<card>/psl_timebase_synced +Date: March 2016 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Returns 1 if the psl timebase register is synchronized + with the core timebase register, 0 otherwise. +Users: https://github.com/ibm-capi/libcxl + +What: /sys/class/cxl/<card>/tunneled_ops_supported +Date: May 2018 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Returns 1 if tunneled operations are supported in capi mode, + 0 otherwise. +Users: https://github.com/ibm-capi/libcxl diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq new file mode 100644 index 000000000..1e7e0bb4c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-devfreq @@ -0,0 +1,134 @@ +What: /sys/class/devfreq/.../ +Date: September 2011 +Contact: MyungJoo Ham <myungjoo.ham@samsung.com> +Description: + Provide a place in sysfs for the devfreq objects. + This allows accessing various devfreq specific variables. + The name of devfreq object denoted as ... is same as the + name of device using devfreq. + +What: /sys/class/devfreq/.../name +Date: November 2019 +Contact: Chanwoo Choi <cw00.choi@samsung.com> +Description: + The /sys/class/devfreq/.../name shows the name of device + of the corresponding devfreq object. + +What: /sys/class/devfreq/.../governor +Date: September 2011 +Contact: MyungJoo Ham <myungjoo.ham@samsung.com> +Description: + The /sys/class/devfreq/.../governor show or set the name of the + governor used by the corresponding devfreq object. + +What: /sys/class/devfreq/.../cur_freq +Date: September 2011 +Contact: MyungJoo Ham <myungjoo.ham@samsung.com> +Description: + The /sys/class/devfreq/.../cur_freq shows the current + frequency of the corresponding devfreq object. Same as + target_freq when get_cur_freq() is not implemented by + devfreq driver. + +What: /sys/class/devfreq/.../target_freq +Date: September 2012 +Contact: Rajagopal Venkat <rajagopal.venkat@linaro.org> +Description: + The /sys/class/devfreq/.../target_freq shows the next governor + predicted target frequency of the corresponding devfreq object. + +What: /sys/class/devfreq/.../trans_stat +Date: October 2012 +Contact: MyungJoo Ham <myungjoo.ham@samsung.com> +Description: + This ABI shows or clears the statistics of devfreq behavior + on a specific device. It shows the time spent in each state + and the number of transitions between states. + In order to activate this ABI, the devfreq target device + driver should provide the list of available frequencies + with its profile. If need to reset the statistics of devfreq + behavior on a specific device, enter 0(zero) to 'trans_stat' + as following:: + + echo 0 > /sys/class/devfreq/.../trans_stat + + If the transition table is bigger than PAGE_SIZE, reading + this will return an -EFBIG error. + +What: /sys/class/devfreq/.../available_frequencies +Date: October 2012 +Contact: Nishanth Menon <nm@ti.com> +Description: + The /sys/class/devfreq/.../available_frequencies shows + the available frequencies of the corresponding devfreq object. + This is a snapshot of available frequencies and not limited + by the min/max frequency restrictions. + +What: /sys/class/devfreq/.../available_governors +Date: October 2012 +Contact: Nishanth Menon <nm@ti.com> +Description: + The /sys/class/devfreq/.../available_governors shows + currently available governors in the system. + +What: /sys/class/devfreq/.../min_freq +Date: January 2013 +Contact: MyungJoo Ham <myungjoo.ham@samsung.com> +Description: + The /sys/class/devfreq/.../min_freq shows and stores + the minimum frequency requested by users. It is 0 if + the user does not care. min_freq overrides the + frequency requested by governors. + +What: /sys/class/devfreq/.../max_freq +Date: January 2013 +Contact: MyungJoo Ham <myungjoo.ham@samsung.com> +Description: + The /sys/class/devfreq/.../max_freq shows and stores + the maximum frequency requested by users. It is 0 if + the user does not care. max_freq overrides the + frequency requested by governors and min_freq. + The max_freq overrides min_freq because max_freq may be + used to throttle devices to avoid overheating. + +What: /sys/class/devfreq/.../polling_interval +Date: September 2011 +Contact: MyungJoo Ham <myungjoo.ham@samsung.com> +Description: + The /sys/class/devfreq/.../polling_interval shows and sets + the requested polling interval of the corresponding devfreq + object. The values are represented in ms. If the value is + less than 1 jiffy, it is considered to be 0, which means + no polling. This value is meaningless if the governor is + not polling. + + A list of governors that support the node: + - simple_ondmenad + - tegra_actmon + +What: /sys/class/devfreq/.../userspace/set_freq +Date: September 2011 +Contact: MyungJoo Ham <myungjoo.ham@samsung.com> +Description: + The /sys/class/devfreq/.../userspace/set_freq shows and + sets the requested frequency for the devfreq object if + userspace governor is in effect. + + A list of governors that support the node: + - userspace + +What: /sys/class/devfreq/.../timer +Date: July 2020 +Contact: Chanwoo Choi <cw00.choi@samsung.com> +Description: + This ABI shows and stores the kind of work timer by users. + This work timer is used by devfreq workqueue in order to + monitor the device status such as utilization. The user + can change the work timer on runtime according to their demand + as following:: + + echo deferrable > /sys/class/devfreq/.../timer + echo delayed > /sys/class/devfreq/.../timer + + A list of governors that support the node: + - simple_ondemand diff --git a/Documentation/ABI/testing/sysfs-class-devfreq-event b/Documentation/ABI/testing/sysfs-class-devfreq-event new file mode 100644 index 000000000..dbe48495e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-devfreq-event @@ -0,0 +1,25 @@ +What: /sys/class/devfreq-event/event<x>/ +Date: January 2017 +Contact: Chanwoo Choi <cw00.choi@samsung.com> +Description: + Provide a place in sysfs for the devfreq-event objects. + This allows accessing various devfreq-event specific variables. + The name of devfreq-event object denoted as 'event<x>' which + includes the unique number of 'x' for each devfreq-event object. + +What: /sys/class/devfreq-event/event<x>/name +Date: January 2017 +Contact: Chanwoo Choi <cw00.choi@samsung.com> +Description: + The /sys/class/devfreq-event/event<x>/name attribute contains + the name of the devfreq-event object. This attribute is + read-only. + +What: /sys/class/devfreq-event/event<x>/enable_count +Date: January 2017 +Contact: Chanwoo Choi <cw00.choi@samsung.com> +Description: + The /sys/class/devfreq-event/event<x>/enable_count attribute + contains the reference count to enable the devfreq-event + object. If the device is enabled, the value of attribute is + greater than zero. diff --git a/Documentation/ABI/testing/sysfs-class-devlink b/Documentation/ABI/testing/sysfs-class-devlink new file mode 100644 index 000000000..8a21ce515 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-devlink @@ -0,0 +1,130 @@ +What: /sys/class/devlink/.../ +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + Provide a place in sysfs for the device link objects in the + kernel at any given time. The name of a device link directory, + denoted as ... above, is of the form <supplier>--<consumer> + where <supplier> is the supplier bus:device name and <consumer> + is the consumer bus:device name. + +What: /sys/class/devlink/.../auto_remove_on +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + This file indicates if the device link will ever be + automatically removed by the driver core when the consumer and + supplier devices themselves are still present. + + This will be one of the following strings: + + - 'consumer unbind' + - 'supplier unbind' + - 'never' + + 'consumer unbind' means the device link will be removed when + the consumer's driver is unbound from the consumer device. + + 'supplier unbind' means the device link will be removed when + the supplier's driver is unbound from the supplier device. + + 'never' means the device link will not be automatically removed + when as long as the supplier and consumer devices themselves + are still present. + +What: /sys/class/devlink/.../consumer +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + This file is a symlink to the consumer device's sysfs directory. + +What: /sys/class/devlink/.../runtime_pm +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + This file indicates if the device link has any impact on the + runtime power management behavior of the consumer and supplier + devices. For example: Making sure the supplier doesn't enter + runtime suspend while the consumer is active. + + This will be one of the following strings: + + === ======================================== + '0' Does not affect runtime power management + '1' Affects runtime power management + === ======================================== + +What: /sys/class/devlink/.../status +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + This file indicates the status of the device link. The status + of a device link is affected by whether the supplier and + consumer devices have been bound to their corresponding + drivers. The status of a device link also affects the binding + and unbinding of the supplier and consumer devices with their + drivers and also affects whether the software state of the + supplier device is synced with the hardware state of the + supplier device after boot up. + See also: sysfs-devices-state_synced. + + This will be one of the following strings: + + - 'not tracked' + - 'dormant' + - 'available' + - 'consumer probing' + - 'active' + - 'supplier unbinding' + - 'unknown' + + 'not tracked' means this device link does not track the status + and has no impact on the binding, unbinding and syncing the + hardware and software device state. + + 'dormant' means the supplier and the consumer devices have not + bound to their driver. + + 'available' means the supplier has bound to its driver and is + available to supply resources to the consumer device. + + 'consumer probing' means the consumer device is currently + trying to bind to its driver. + + 'active' means the supplier and consumer devices have both + bound successfully to their drivers. + + 'supplier unbinding' means the supplier devices is currently in + the process of unbinding from its driver. + + 'unknown' means the state of the device link is not any of the + above. If this is ever the value, there's a bug in the kernel. + +What: /sys/class/devlink/.../supplier +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + This file is a symlink to the supplier device's sysfs directory. + +What: /sys/class/devlink/.../sync_state_only +Date: May 2020 +Contact: Saravana Kannan <saravanak@google.com> +Description: + This file indicates if the device link is limited to only + affecting the syncing of the hardware and software state of the + supplier device. + + This will be one of the following strings: + + === ================================ + '0' + '1' Affects runtime power management + === ================================ + + '0' means the device link can affect other device behaviors + like binding/unbinding, suspend/resume, runtime power + management, etc. + + '1' means the device link will only affect the syncing of + hardware and software state of the supplier device after boot + up and doesn't not affect other behaviors of the devices. diff --git a/Documentation/ABI/testing/sysfs-class-extcon b/Documentation/ABI/testing/sysfs-class-extcon new file mode 100644 index 000000000..f8e705375 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-extcon @@ -0,0 +1,101 @@ +What: /sys/class/extcon/.../ +Date: February 2012 +Contact: MyungJoo Ham <myungjoo.ham@samsung.com> +Description: + Provide a place in sysfs for the extcon objects. + This allows accessing extcon specific variables. + The name of extcon object denoted as ... is the name given + with extcon_dev_register. + + One extcon device denotes a single external connector + port. An external connector may have multiple cables + attached simultaneously. Many of docks, cradles, and + accessory cables have such capability. For example, + the 30-pin port of Nuri board (/arch/arm/mach-exynos) + may have both HDMI and Charger attached, or analog audio, + video, and USB cables attached simultaneously. + + If there are cables mutually exclusive with each other, + such binary relations may be expressed with extcon_dev's + mutually_exclusive array. + +What: /sys/class/extcon/.../name +Date: February 2012 +Contact: MyungJoo Ham <myungjoo.ham@samsung.com> +Description: + The /sys/class/extcon/.../name shows the name of the extcon + object. If the extcon object has an optional callback + "show_name" defined, the callback will provide the name with + this sysfs node. + +What: /sys/class/extcon/.../state +Date: February 2012 +Contact: MyungJoo Ham <myungjoo.ham@samsung.com> +Description: + The /sys/class/extcon/.../state shows and stores the cable + attach/detach information of the corresponding extcon object. + If the extcon object has an optional callback "show_state" + defined, the showing function is overridden with the optional + callback. + + If the default callback for showing function is used, the + format is like this:: + + # cat state + USB_OTG=1 + HDMI=0 + TA=1 + EAR_JACK=0 + # + + In this example, the extcon device has USB_OTG and TA + cables attached and HDMI and EAR_JACK cables detached. + + In order to update the state of an extcon device, enter a hex + state number starting with 0x:: + + # echo 0xHEX > state + + This updates the whole state of the extcon device. + Inputs of all the methods are required to meet the + mutually_exclusive conditions if they exist. + + It is recommended to use this "global" state interface if + you need to set the value atomically. The later state + interface associated with each cable cannot update + multiple cable states of an extcon device simultaneously. + +What: /sys/class/extcon/.../cable.X/name +Date: February 2012 +Contact: MyungJoo Ham <myungjoo.ham@samsung.com> +Description: + The /sys/class/extcon/.../cable.X/name shows the name of cable + "X" (integer between 0 and 31) of an extcon device. + +What: /sys/class/extcon/.../cable.X/state +Date: February 2012 +Contact: MyungJoo Ham <myungjoo.ham@samsung.com> +Description: + The /sys/class/extcon/.../cable.X/state shows and stores the + state of cable "X" (integer between 0 and 31) of an extcon + device. The state value is either 0 (detached) or 1 + (attached). + +What: /sys/class/extcon/.../mutually_exclusive/... +Date: December 2011 +Contact: MyungJoo Ham <myungjoo.ham@samsung.com> +Description: + Shows the relations of mutually exclusiveness. For example, + if the mutually_exclusive array of extcon device is + {0x3, 0x5, 0xC, 0x0}, then the output is:: + + # ls mutually_exclusive/ + 0x3 + 0x5 + 0xc + # + + Note that mutually_exclusive is a sub-directory of the extcon + device and the file names under the mutually_exclusive + directory show the mutually-exclusive sets, not the contents + of the files. diff --git a/Documentation/ABI/testing/sysfs-class-fc b/Documentation/ABI/testing/sysfs-class-fc new file mode 100644 index 000000000..3057a6d3b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-fc @@ -0,0 +1,27 @@ +What: /sys/class/fc/fc_udev_device/appid_store +Date: Aug 2021 +Contact: Muneendra Kumar <muneendra.kumar@broadconm.com> +Description: + This interface allows an admin to set an FC application + identifier in the blkcg associated with a cgroup id. The + identifier is typically a UUID that is associated with + an application or logical entity such as a virtual + machine or container group. The application or logical + entity utilizes a block device via the cgroup id. + FC adapter drivers may query the identifier and tag FC + traffic based on the identifier. FC host and FC fabric + entities can utilize the application id and FC traffic + tag to identify traffic sources. + + The interface expects a string "<cgroupid>:<appid>" where: + <cgroupid> is inode of the cgroup in hexadecimal + <appid> is user provided string upto 128 characters + in length. + + If an appid_store is done for a cgroup id that already + has an appid set, the new value will override the + previous value. + + If an admin wants to remove an FC application identifier + from a cgroup, an appid_store should be done with the + following string: "<cgroupid>:" diff --git a/Documentation/ABI/testing/sysfs-class-fc_host b/Documentation/ABI/testing/sysfs-class-fc_host new file mode 100644 index 000000000..0a696cbd8 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-fc_host @@ -0,0 +1,23 @@ +What: /sys/class/fc_host/hostX/statistics/fpin_cn_yyy +Date: July 2020 +Contact: Shyam Sundar <ssundar@marvell.com> +Description: + These files contain the number of congestion notification + events recorded by the F_Port, reported using fabric + performance impact notification (FPIN) event. + +What: /sys/class/fc_host/hostX/statistics/fpin_li_yyy +Date: July 2020 +Contact: Shyam Sundar <ssundar@marvell.com> +Description: + These files contain the number of link integrity error + events recorded by the F_Port/Nx_Port, reported using fabric + performance impact notification (FPIN) event. + +What: /sys/class/fc_host/hostX/statistics/fpin_dn_yyy +Date: July 2020 +Contact: Shyam Sundar <ssundar@marvell.com> +Description: + These files contain the number of delivery related errors + recorded by the F_Port/Nx_Port, reported using fabric + performance impact notification (FPIN) event. diff --git a/Documentation/ABI/testing/sysfs-class-fc_remote_ports b/Documentation/ABI/testing/sysfs-class-fc_remote_ports new file mode 100644 index 000000000..55a951529 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-fc_remote_ports @@ -0,0 +1,23 @@ +What: /sys/class/fc_remote_ports/rport-X:Y-Z/statistics/fpin_cn_yyy +Date: July 2020 +Contact: Shyam Sundar <ssundar@marvell.com> +Description: + These files contain the number of congestion notification + events recorded by the F_Port/Nx_Port, reported using fabric + performance impact notification (FPIN) event. + +What: /sys/class/fc_remote_ports/rport-X:Y-Z/statistics/fpin_li_yyy +Date: July 2020 +Contact: Shyam Sundar <ssundar@marvell.com> +Description: + These files contain the number of link integrity error + events recorded by the F_Port/Nx_Port, reported using fabric + performance impact notification (FPIN) event. + +What: /sys/class/fc_remote_ports/rport-X:Y-Z/statistics/fpin_dn_yyy +Date: July 2020 +Contact: Shyam Sundar <ssundar@marvell.com> +Description: + These files contain the number of delivery related errors + recorded by the F_Port/Nx_Port, reported using fabric + performance impact notification (FPIN) event. diff --git a/Documentation/ABI/testing/sysfs-class-firmware b/Documentation/ABI/testing/sysfs-class-firmware new file mode 100644 index 000000000..978d3d500 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-firmware @@ -0,0 +1,77 @@ +What: /sys/class/firmware/.../data +Date: July 2022 +KernelVersion: 5.19 +Contact: Russ Weight <russell.h.weight@intel.com> +Description: The data sysfs file is used for firmware-fallback and for + firmware uploads. Cat a firmware image to this sysfs file + after you echo 1 to the loading sysfs file. When the firmware + image write is complete, echo 0 to the loading sysfs file. This + sequence will signal the completion of the firmware write and + signal the lower-level driver that the firmware data is + available. + +What: /sys/class/firmware/.../cancel +Date: July 2022 +KernelVersion: 5.19 +Contact: Russ Weight <russell.h.weight@intel.com> +Description: Write-only. For firmware uploads, write a "1" to this file to + request that the transfer of firmware data to the lower-level + device be canceled. This request will be rejected (EBUSY) if + the update cannot be canceled (e.g. a FLASH write is in + progress) or (ENODEV) if there is no firmware update in progress. + +What: /sys/class/firmware/.../error +Date: July 2022 +KernelVersion: 5.19 +Contact: Russ Weight <russell.h.weight@intel.com> +Description: Read-only. Returns a string describing a failed firmware + upload. This string will be in the form of <STATUS>:<ERROR>, + where <STATUS> will be one of the status strings described + for the status sysfs file and <ERROR> will be one of the + following: "hw-error", "timeout", "user-abort", "device-busy", + "invalid-file-size", "read-write-error", "flash-wearout". The + error sysfs file is only meaningful when the current firmware + upload status is "idle". If this file is read while a firmware + transfer is in progress, then the read will fail with EBUSY. + +What: /sys/class/firmware/.../loading +Date: July 2022 +KernelVersion: 5.19 +Contact: Russ Weight <russell.h.weight@intel.com> +Description: The loading sysfs file is used for both firmware-fallback and + for firmware uploads. Echo 1 onto the loading file to indicate + you are writing a firmware file to the data sysfs node. Echo + -1 onto this file to abort the data write or echo 0 onto this + file to indicate that the write is complete. For firmware + uploads, the zero value also triggers the transfer of the + firmware data to the lower-level device driver. + +What: /sys/class/firmware/.../remaining_size +Date: July 2022 +KernelVersion: 5.19 +Contact: Russ Weight <russell.h.weight@intel.com> +Description: Read-only. For firmware upload, this file contains the size + of the firmware data that remains to be transferred to the + lower-level device driver. The size value is initialized to + the full size of the firmware image that was previously + written to the data sysfs file. This value is periodically + updated during the "transferring" phase of the firmware + upload. + Format: "%u". + +What: /sys/class/firmware/.../status +Date: July 2022 +KernelVersion: 5.19 +Contact: Russ Weight <russell.h.weight@intel.com> +Description: Read-only. Returns a string describing the current status of + a firmware upload. The string will be one of the following: + idle, "receiving", "preparing", "transferring", "programming". + +What: /sys/class/firmware/.../timeout +Date: July 2022 +KernelVersion: 5.19 +Contact: Russ Weight <russell.h.weight@intel.com> +Description: This file supports the timeout mechanism for firmware + fallback. This file has no affect on firmware uploads. For + more information on timeouts please see the documentation + for firmware fallback. diff --git a/Documentation/ABI/testing/sysfs-class-firmware-attributes b/Documentation/ABI/testing/sysfs-class-firmware-attributes new file mode 100644 index 000000000..4cdba3477 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-firmware-attributes @@ -0,0 +1,366 @@ +What: /sys/class/firmware-attributes/*/attributes/*/ +Date: February 2021 +KernelVersion: 5.11 +Contact: Divya Bharathi <Divya.Bharathi@Dell.com>, + Prasanth KSR <prasanth.ksr@dell.com> + Dell.Client.Kernel@dell.com +Description: + A sysfs interface for systems management software to enable + configuration capability on supported systems. This directory + exposes interfaces for interacting with configuration options. + + Unless otherwise specified in an attribute description all attributes are optional + and will accept UTF-8 input. + + type: + A file that can be read to obtain the type of attribute. + This attribute is mandatory. + + The following are known types: + + - enumeration: a set of pre-defined valid values + - integer: a range of numerical values + - string + + All attribute types support the following values: + + current_value: + A file that can be read to obtain the current + value of the <attr>. + + This file can also be written to in order to update the value of a + <attr> + + This attribute is mandatory. + + default_value: + A file that can be read to obtain the default + value of the <attr> + + display_name: + A file that can be read to obtain a user friendly + description of the at <attr> + + display_name_language_code: + A file that can be read to obtain + the IETF language tag corresponding to the + "display_name" of the <attr> + + "enumeration"-type specific properties: + + possible_values: + A file that can be read to obtain the possible + values of the <attr>. Values are separated using + semi-colon (``;``). + + "integer"-type specific properties: + + min_value: + A file that can be read to obtain the lower + bound value of the <attr> + + max_value: + A file that can be read to obtain the upper + bound value of the <attr> + + scalar_increment: + A file that can be read to obtain the scalar value used for + increments of current_value this attribute accepts. + + "string"-type specific properties: + + max_length: + A file that can be read to obtain the maximum + length value of the <attr> + + min_length: + A file that can be read to obtain the minimum + length value of the <attr> + + Dell specific class extensions + ------------------------------ + + On Dell systems the following additional attributes are available: + + dell_modifier: + A file that can be read to obtain attribute-level + dependency rule. It says an attribute X will become read-only or + suppressed, if/if-not attribute Y is configured. + + modifier rules can be in following format:: + + [ReadOnlyIf:<attribute>=<value>] + [ReadOnlyIfNot:<attribute>=<value>] + [SuppressIf:<attribute>=<value>] + [SuppressIfNot:<attribute>=<value>] + + For example:: + + AutoOnFri/dell_modifier has value, + [SuppressIfNot:AutoOn=SelectDays] + + This means AutoOnFri will be suppressed in BIOS setup if AutoOn + attribute is not "SelectDays" and its value will not be effective + through sysfs until this rule is met. + + Enumeration attributes also support the following: + + dell_value_modifier: + A file that can be read to obtain value-level dependency. + This file is similar to dell_modifier but here, an + attribute's current value will be forcefully changed based + dependent attributes value. + + dell_value_modifier rules can be in following format:: + + <value>[ForceIf:<attribute>=<value>] + <value>[ForceIfNot:<attribute>=<value>] + + For example:: + + LegacyOrom/dell_value_modifier has value: + Disabled[ForceIf:SecureBoot=Enabled] + + This means LegacyOrom's current value will be forced to + "Disabled" in BIOS setup if SecureBoot is Enabled and its + value will not be effective through sysfs until this rule is + met. + +What: /sys/class/firmware-attributes/*/authentication/ +Date: February 2021 +KernelVersion: 5.11 +Contact: Divya Bharathi <Divya.Bharathi@Dell.com>, + Prasanth KSR <prasanth.ksr@dell.com> + Dell.Client.Kernel@dell.com +Description: + Devices support various authentication mechanisms which can be exposed + as a separate configuration object. + + For example a "BIOS Admin" password and "System" Password can be set, + reset or cleared using these attributes. + + - An "Admin" password is used for preventing modification to the BIOS + settings. + - A "System" password is required to boot a machine. + + Change in any of these two authentication methods will also generate an + uevent KOBJ_CHANGE. + + is_enabled: + A file that can be read to obtain a 0/1 flag to see if + <attr> authentication is enabled. + This attribute is mandatory. + + role: + The type of authentication used. + This attribute is mandatory. + + Known types: + bios-admin: + Representing BIOS administrator password + power-on: + Representing a password required to use + the system + system-mgmt: + Representing System Management password. + See Lenovo extensions section for details + HDD: + Representing HDD password + See Lenovo extensions section for details + NVMe: + Representing NVMe password + See Lenovo extensions section for details + + mechanism: + The means of authentication. This attribute is mandatory. + Only supported type currently is "password". + + max_password_length: + A file that can be read to obtain the + maximum length of the Password + + min_password_length: + A file that can be read to obtain the + minimum length of the Password + + current_password: + A write only value used for privileged access such as + setting attributes when a system or admin password is set + or resetting to a new password + + This attribute is mandatory when mechanism == "password". + + new_password: + A write only value that when used in tandem with + current_password will reset a system or admin password. + + Note, password management is session specific. If Admin password is set, + same password must be written into current_password file (required for + password-validation) and must be cleared once the session is over. + For example:: + + echo "password" > current_password + echo "disabled" > TouchScreen/current_value + echo "" > current_password + + Drivers may emit a CHANGE uevent when a password is set or unset + userspace may check it again. + + On Dell and Lenovo systems, if Admin password is set, then all BIOS attributes + require password validation. + On Lenovo systems if you change the Admin password the new password is not active until + the next boot. + + Lenovo specific class extensions + -------------------------------- + + On Lenovo systems the following additional settings are available: + + role: system-mgmt This gives the same authority as the bios-admin password to control + security related features. The authorities allocated can be set via + the BIOS menu SMP Access Control Policy + + role: HDD & NVMe This password is used to unlock access to the drive at boot. Note see + 'level' and 'index' extensions below. + + lenovo_encoding: + The encoding method that is used. This can be either "ascii" + or "scancode". Default is set to "ascii" + + lenovo_kbdlang: + The keyboard language method that is used. This is generally a + two char code (e.g. "us", "fr", "gr") and may vary per platform. + Default is set to "us" + + level: + Available for HDD and NVMe authentication to set 'user' or 'master' + privilege level. + If only the user password is configured then this should be used to + unlock the drive at boot. If both master and user passwords are set + then either can be used. If a master password is set a user password + is required. + This attribute defaults to 'user' level + + index: + Used with HDD and NVME authentication to set the drive index + that is being referenced (e.g hdd0, hdd1 etc) + This attribute defaults to device 0. + + certificate, signature, save_signature: + These attributes are used for certificate based authentication. This is + used in conjunction with a signing server as an alternative to password + based authentication. + The user writes to the attribute(s) with a BASE64 encoded string obtained + from the signing server. + The attributes can be displayed to check the stored value. + + Some usage examples: + + Installing a certificate to enable feature:: + + echo "supervisor password" > authentication/Admin/current_password + echo "signed certificate" > authentication/Admin/certificate + + Updating the installed certificate:: + + echo "signature" > authentication/Admin/signature + echo "signed certificate" > authentication/Admin/certificate + + Removing the installed certificate:: + + echo "signature" > authentication/Admin/signature + echo "" > authentication/Admin/certificate + + Changing a BIOS setting:: + + echo "signature" > authentication/Admin/signature + echo "save signature" > authentication/Admin/save_signature + echo Enable > attribute/PasswordBeep/current_value + + You cannot enable certificate authentication if a supervisor password + has not been set. + Clearing the certificate results in no bios-admin authentication method + being configured allowing anyone to make changes. + After any of these operations the system must reboot for the changes to + take effect. + + certificate_thumbprint: + Read only attribute used to display the MD5, SHA1 and SHA256 thumbprints + for the certificate installed in the BIOS. + + certificate_to_password: + Write only attribute used to switch from certificate based authentication + back to password based. + Usage:: + + echo "signature" > authentication/Admin/signature + echo "password" > authentication/Admin/certificate_to_password + + +What: /sys/class/firmware-attributes/*/attributes/pending_reboot +Date: February 2021 +KernelVersion: 5.11 +Contact: Divya Bharathi <Divya.Bharathi@Dell.com>, + Prasanth KSR <prasanth.ksr@dell.com> + Dell.Client.Kernel@dell.com +Description: + A read-only attribute reads 1 if a reboot is necessary to apply + pending BIOS attribute changes. Also, an uevent_KOBJ_CHANGE is + generated when it changes to 1. + + == ========================================= + 0 All BIOS attributes setting are current + 1 A reboot is necessary to get pending BIOS + attribute changes applied + == ========================================= + + Note, userspace applications need to follow below steps for efficient + BIOS management, + + 1. Check if admin password is set. If yes, follow session method for + password management as briefed under authentication section above. + 2. Before setting any attribute, check if it has any modifiers + or value_modifiers. If yes, incorporate them and then modify + attribute. + + Drivers may emit a CHANGE uevent when this value changes and userspace + may check it again. + +What: /sys/class/firmware-attributes/*/attributes/reset_bios +Date: February 2021 +KernelVersion: 5.11 +Contact: Divya Bharathi <Divya.Bharathi@Dell.com>, + Prasanth KSR <prasanth.ksr@dell.com> + Dell.Client.Kernel@dell.com +Description: + This attribute can be used to reset the BIOS Configuration. + Specifically, it tells which type of reset BIOS configuration is being + requested on the host. + + Reading from it returns a list of supported options encoded as: + + - 'builtinsafe' (Built in safe configuration profile) + - 'lastknowngood' (Last known good saved configuration profile) + - 'factory' (Default factory settings configuration profile) + - 'custom' (Custom saved configuration profile) + + The currently selected option is printed in square brackets as + shown below:: + + # echo "factory" > /sys/class/firmware-attributes/*/device/attributes/reset_bios + # cat /sys/class/firmware-attributes/*/device/attributes/reset_bios + builtinsafe lastknowngood [factory] custom + + Note that any changes to this attribute requires a reboot + for changes to take effect. + +What: /sys/class/firmware-attributes/*/attributes/debug_cmd +Date: July 2021 +KernelVersion: 5.14 +Contact: Mark Pearson <markpearson@lenovo.com> +Description: + This write only attribute can be used to send debug commands to the BIOS. + This should only be used when recommended by the BIOS vendor. Vendors may + use it to enable extra debug attributes or BIOS features for testing purposes. + + Note that any changes to this attribute requires a reboot for changes to take effect. diff --git a/Documentation/ABI/testing/sysfs-class-fpga-bridge b/Documentation/ABI/testing/sysfs-class-fpga-bridge new file mode 100644 index 000000000..312ae2c57 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-fpga-bridge @@ -0,0 +1,11 @@ +What: /sys/class/fpga_bridge/<bridge>/name +Date: January 2016 +KernelVersion: 4.5 +Contact: Alan Tull <atull@opensource.altera.com> +Description: Name of low level FPGA bridge driver. + +What: /sys/class/fpga_bridge/<bridge>/state +Date: January 2016 +KernelVersion: 4.5 +Contact: Alan Tull <atull@opensource.altera.com> +Description: Show bridge state as "enabled" or "disabled" diff --git a/Documentation/ABI/testing/sysfs-class-fpga-manager b/Documentation/ABI/testing/sysfs-class-fpga-manager new file mode 100644 index 000000000..d78689c35 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-fpga-manager @@ -0,0 +1,60 @@ +What: /sys/class/fpga_manager/<fpga>/name +Date: August 2015 +KernelVersion: 4.3 +Contact: Alan Tull <atull@opensource.altera.com> +Description: Name of low level fpga manager driver. + +What: /sys/class/fpga_manager/<fpga>/state +Date: August 2015 +KernelVersion: 4.3 +Contact: Alan Tull <atull@opensource.altera.com> +Description: Read fpga manager state as a string. + The intent is to provide enough detail that if something goes + wrong during FPGA programming (something that the driver can't + fix) then userspace can know, i.e. if the firmware request + fails, that could be due to not being able to find the firmware + file. + + This is a superset of FPGA states and fpga manager driver + states. The fpga manager driver is walking through these steps + to get the FPGA into a known operating state. It's a sequence, + though some steps may get skipped. Valid FPGA states will vary + by manufacturer; this is a superset. + + * unknown = can't determine state + * power off = FPGA power is off + * power up = FPGA reports power is up + * reset = FPGA held in reset state + * firmware request = firmware class request in progress + * firmware request error = firmware request failed + * write init = preparing FPGA for programming + * write init error = Error while preparing FPGA for programming + * write = FPGA ready to receive image data + * write error = Error while programming + * write complete = Doing post programming steps + * write complete error = Error while doing post programming + * operating = FPGA is programmed and operating + +What: /sys/class/fpga_manager/<fpga>/status +Date: June 2018 +KernelVersion: 4.19 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read fpga manager status as a string. + If FPGA programming operation fails, it could be caused by crc + error or incompatible bitstream image. The intent of this + interface is to provide more detailed information for FPGA + programming errors to userspace. This is a list of strings for + the supported status. + + * reconfig operation error - invalid operations detected by + reconfiguration hardware. + e.g. start reconfiguration + with errors not cleared + * reconfig CRC error - CRC error detected by + reconfiguration hardware. + * reconfig incompatible image - reconfiguration image is + incompatible with hardware + * reconfig IP protocol error - protocol errors detected by + reconfiguration hardware + * reconfig fifo overflow error - FIFO overflow detected by + reconfiguration hardware diff --git a/Documentation/ABI/testing/sysfs-class-fpga-region b/Documentation/ABI/testing/sysfs-class-fpga-region new file mode 100644 index 000000000..bc7ec644a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-fpga-region @@ -0,0 +1,9 @@ +What: /sys/class/fpga_region/<region>/compat_id +Date: June 2018 +KernelVersion: 4.19 +Contact: Wu Hao <hao.wu@intel.com> +Description: FPGA region id for compatibility check, e.g. compatibility + of the FPGA reconfiguration hardware and image. This value + is defined or calculated by the layer that is creating the + FPGA region. This interface returns the compat_id value or + just error code -ENOENT in case compat_id is not used. diff --git a/Documentation/ABI/testing/sysfs-class-gnss b/Documentation/ABI/testing/sysfs-class-gnss new file mode 100644 index 000000000..9650f3a7f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-gnss @@ -0,0 +1,17 @@ +What: /sys/class/gnss/gnss<N>/type +Date: May 2018 +KernelVersion: 4.18 +Contact: Johan Hovold <johan@kernel.org> +Description: + The GNSS receiver type. The currently identified types reflect + the protocol(s) supported by the receiver: + + ====== =========== + "NMEA" NMEA 0183 + "SiRF" SiRF Binary + "UBX" UBX + ====== =========== + + Note that also non-"NMEA" type receivers typically support a + subset of NMEA 0183 with vendor extensions (e.g. to allow + switching to a vendor protocol). diff --git a/Documentation/ABI/testing/sysfs-class-hwmon b/Documentation/ABI/testing/sysfs-class-hwmon new file mode 100644 index 000000000..7271781a2 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-hwmon @@ -0,0 +1,949 @@ +What: /sys/class/hwmon/hwmonX/name +Description: + The chip name. + This should be a short, lowercase string, not containing + whitespace, dashes, or the wildcard character '*'. + This attribute represents the chip name. It is the only + mandatory attribute. + I2C devices get this attribute created automatically. + + RO + +What: /sys/class/hwmon/hwmonX/label +Description: + A descriptive label that allows to uniquely identify a + device within the system. + The contents of the label are free-form. + + RO + +What: /sys/class/hwmon/hwmonX/update_interval +Description: + The interval at which the chip will update readings. + Unit: millisecond + + RW + + Some devices have a variable update rate or interval. + This attribute can be used to change it to the desired value. + +What: /sys/class/hwmon/hwmonX/inY_min +Description: + Voltage min value. + + Unit: millivolt + + RW + +What: /sys/class/hwmon/hwmonX/inY_lcrit +Description: + Voltage critical min value. + + Unit: millivolt + + RW + + If voltage drops to or below this limit, the system may + take drastic action such as power down or reset. At the very + least, it should report a fault. + +What: /sys/class/hwmon/hwmonX/inY_max +Description: + Voltage max value. + + Unit: millivolt + + RW + +What: /sys/class/hwmon/hwmonX/inY_crit +Description: + Voltage critical max value. + + Unit: millivolt + + RW + + If voltage reaches or exceeds this limit, the system may + take drastic action such as power down or reset. At the very + least, it should report a fault. + +What: /sys/class/hwmon/hwmonX/inY_input +Description: + Voltage input value. + + Unit: millivolt + + RO + + Voltage measured on the chip pin. + + Actual voltage depends on the scaling resistors on the + motherboard, as recommended in the chip datasheet. + + This varies by chip and by motherboard. + Because of this variation, values are generally NOT scaled + by the chip driver, and must be done by the application. + However, some drivers (notably lm87 and via686a) + do scale, because of internal resistors built into a chip. + These drivers will output the actual voltage. Rule of + thumb: drivers should report the voltage values at the + "pins" of the chip. + +What: /sys/class/hwmon/hwmonX/inY_average +Description: + Average voltage + + Unit: millivolt + + RO + +What: /sys/class/hwmon/hwmonX/inY_lowest +Description: + Historical minimum voltage + + Unit: millivolt + + RO + +What: /sys/class/hwmon/hwmonX/inY_highest +Description: + Historical maximum voltage + + Unit: millivolt + + RO + +What: /sys/class/hwmon/hwmonX/inY_reset_history +Description: + Reset inX_lowest and inX_highest + + WO + +What: /sys/class/hwmon/hwmonX/in_reset_history +Description: + Reset inX_lowest and inX_highest for all sensors + + WO + +What: /sys/class/hwmon/hwmonX/inY_label +Description: + Suggested voltage channel label. + + Text string + + Should only be created if the driver has hints about what + this voltage channel is being used for, and user-space + doesn't. In all other cases, the label is provided by + user-space. + + RO + +What: /sys/class/hwmon/hwmonX/inY_enable +Description: + Enable or disable the sensors. + + When disabled the sensor read will return -ENODATA. + + - 1: Enable + - 0: Disable + + RW + +What: /sys/class/hwmon/hwmonX/cpuY_vid +Description: + CPU core reference voltage. + + Unit: millivolt + + RO + + Not always correct. + +What: /sys/class/hwmon/hwmonX/vrm +Description: + Voltage Regulator Module version number. + + RW (but changing it should no more be necessary) + + Originally the VRM standard version multiplied by 10, but now + an arbitrary number, as not all standards have a version + number. + + Affects the way the driver calculates the CPU core reference + voltage from the vid pins. + +What: /sys/class/hwmon/hwmonX/inY_rated_min +Description: + Minimum rated voltage. + + Unit: millivolt + + RO + +What: /sys/class/hwmon/hwmonX/inY_rated_max +Description: + Maximum rated voltage. + + Unit: millivolt + + RO + +What: /sys/class/hwmon/hwmonX/fanY_min +Description: + Fan minimum value + + Unit: revolution/min (RPM) + + RW + +What: /sys/class/hwmon/hwmonX/fanY_max +Description: + Fan maximum value + + Unit: revolution/min (RPM) + + Only rarely supported by the hardware. + RW + +What: /sys/class/hwmon/hwmonX/fanY_input +Description: + Fan input value. + + Unit: revolution/min (RPM) + + RO + +What: /sys/class/hwmon/hwmonX/fanY_div +Description: + Fan divisor. + + Integer value in powers of two (1, 2, 4, 8, 16, 32, 64, 128). + + RW + + Some chips only support values 1, 2, 4 and 8. + Note that this is actually an internal clock divisor, which + affects the measurable speed range, not the read value. + +What: /sys/class/hwmon/hwmonX/fanY_pulses +Description: + Number of tachometer pulses per fan revolution. + + Integer value, typically between 1 and 4. + + RW + + This value is a characteristic of the fan connected to the + device's input, so it has to be set in accordance with the fan + model. + + Should only be created if the chip has a register to configure + the number of pulses. In the absence of such a register (and + thus attribute) the value assumed by all devices is 2 pulses + per fan revolution. + +What: /sys/class/hwmon/hwmonX/fanY_target +Description: + Desired fan speed + + Unit: revolution/min (RPM) + + RW + + Only makes sense if the chip supports closed-loop fan speed + control based on the measured fan speed. + +What: /sys/class/hwmon/hwmonX/fanY_label +Description: + Suggested fan channel label. + + Text string + + Should only be created if the driver has hints about what + this fan channel is being used for, and user-space doesn't. + In all other cases, the label is provided by user-space. + + RO + +What: /sys/class/hwmon/hwmonX/fanY_enable +Description: + Enable or disable the sensors. + + When disabled the sensor read will return -ENODATA. + + - 1: Enable + - 0: Disable + + RW + +What: /sys/class/hwmon/hwmonX/pwmY +Description: + Pulse width modulation fan control. + + Integer value in the range 0 to 255 + + RW + + 255 is max or 100%. + +What: /sys/class/hwmon/hwmonX/pwmY_enable +Description: + Fan speed control method: + + - 0: no fan speed control (i.e. fan at full speed) + - 1: manual fan speed control enabled (using `pwmY`) + - 2+: automatic fan speed control enabled + + Check individual chip documentation files for automatic mode + details. + + RW + +What: /sys/class/hwmon/hwmonX/pwmY_mode +Description: + - 0: DC mode (direct current) + - 1: PWM mode (pulse-width modulation) + + RW + +What: /sys/class/hwmon/hwmonX/pwmY_freq +Description: + Base PWM frequency in Hz. + + Only possibly available when pwmN_mode is PWM, but not always + present even then. + + RW + +What: /sys/class/hwmon/hwmonX/pwmY_auto_channels_temp +Description: + Select which temperature channels affect this PWM output in + auto mode. + + Bitfield, 1 is temp1, 2 is temp2, 4 is temp3 etc... + Which values are possible depend on the chip used. + + RW + +What: /sys/class/hwmon/hwmonX/pwmY_auto_pointZ_pwm +What: /sys/class/hwmon/hwmonX/pwmY_auto_pointZ_temp +What: /sys/class/hwmon/hwmonX/pwmY_auto_pointZ_temp_hyst +Description: + Define the PWM vs temperature curve. + + Number of trip points is chip-dependent. Use this for chips + which associate trip points to PWM output channels. + + RW + +What: /sys/class/hwmon/hwmonX/tempY_auto_pointZ_pwm +What: /sys/class/hwmon/hwmonX/tempY_auto_pointZ_temp +What: /sys/class/hwmon/hwmonX/tempY_auto_pointZ_temp_hyst +Description: + Define the PWM vs temperature curve. + + Number of trip points is chip-dependent. Use this for chips + which associate trip points to temperature channels. + + RW + +What: /sys/class/hwmon/hwmonX/tempY_type +Description: + Sensor type selection. + + Integers 1 to 6 + + RW + + - 1: CPU embedded diode + - 2: 3904 transistor + - 3: thermal diode + - 4: thermistor + - 5: AMD AMDSI + - 6: Intel PECI + + Not all types are supported by all chips + +What: /sys/class/hwmon/hwmonX/tempY_max +Description: + Temperature max value. + + Unit: millidegree Celsius (or millivolt, see below) + + RW + +What: /sys/class/hwmon/hwmonX/tempY_min +Description: + Temperature min value. + + Unit: millidegree Celsius + + RW + +What: /sys/class/hwmon/hwmonX/tempY_max_hyst +Description: + Temperature hysteresis value for max limit. + + Unit: millidegree Celsius + + Must be reported as an absolute temperature, NOT a delta + from the max value. + + RW + +What: /sys/class/hwmon/hwmonX/tempY_min_hyst +Description: + Temperature hysteresis value for min limit. + Unit: millidegree Celsius + + Must be reported as an absolute temperature, NOT a delta + from the min value. + + RW + +What: /sys/class/hwmon/hwmonX/tempY_input +Description: + Temperature input value. + + Unit: millidegree Celsius + + RO + +What: /sys/class/hwmon/hwmonX/tempY_crit +Description: + Temperature critical max value, typically greater than + corresponding temp_max values. + + Unit: millidegree Celsius + + RW + +What: /sys/class/hwmon/hwmonX/tempY_crit_alarm +Description: + Critical high temperature alarm flag. + + - 0: OK + - 1: temperature has reached tempY_crit + + RW + + Contrary to regular alarm flags which clear themselves + automatically when read, this one sticks until cleared by + the user. This is done by writing 0 to the file. Writing + other values is unsupported. + +What: /sys/class/hwmon/hwmonX/tempY_crit_hyst +Description: + Temperature hysteresis value for critical limit. + + Unit: millidegree Celsius + + Must be reported as an absolute temperature, NOT a delta + from the critical value. + + RW + +What: /sys/class/hwmon/hwmonX/tempY_emergency +Description: + Temperature emergency max value, for chips supporting more than + two upper temperature limits. Must be equal or greater than + corresponding temp_crit values. + + Unit: millidegree Celsius + + RW + +What: /sys/class/hwmon/hwmonX/tempY_emergency_hyst +Description: + Temperature hysteresis value for emergency limit. + + Unit: millidegree Celsius + + Must be reported as an absolute temperature, NOT a delta + from the emergency value. + + RW + +What: /sys/class/hwmon/hwmonX/tempY_lcrit +Description: + Temperature critical min value, typically lower than + corresponding temp_min values. + + Unit: millidegree Celsius + + RW + +What: /sys/class/hwmon/hwmonX/tempY_lcrit_hyst +Description: + Temperature hysteresis value for critical min limit. + + Unit: millidegree Celsius + + Must be reported as an absolute temperature, NOT a delta + from the critical min value. + + RW + +What: /sys/class/hwmon/hwmonX/tempY_offset +Description: + Temperature offset which is added to the temperature reading + by the chip. + + Unit: millidegree Celsius + + Read/Write value. + +What: /sys/class/hwmon/hwmonX/tempY_label +Description: + Suggested temperature channel label. + + Text string + + Should only be created if the driver has hints about what + this temperature channel is being used for, and user-space + doesn't. In all other cases, the label is provided by + user-space. + + RO + +What: /sys/class/hwmon/hwmonX/tempY_lowest +Description: + Historical minimum temperature + + Unit: millidegree Celsius + + RO + +What: /sys/class/hwmon/hwmonX/tempY_highest +Description: + Historical maximum temperature + + Unit: millidegree Celsius + + RO + +What: /sys/class/hwmon/hwmonX/tempY_reset_history +Description: + Reset temp_lowest and temp_highest + + WO + +What: /sys/class/hwmon/hwmonX/temp_reset_history +Description: + Reset temp_lowest and temp_highest for all sensors + + WO + +What: /sys/class/hwmon/hwmonX/tempY_enable +Description: + Enable or disable the sensors. + + When disabled the sensor read will return -ENODATA. + + - 1: Enable + - 0: Disable + + RW + +What: /sys/class/hwmon/hwmonX/tempY_rated_min +Description: + Minimum rated temperature. + + Unit: millidegree Celsius + + RO + +What: /sys/class/hwmon/hwmonX/tempY_rated_max +Description: + Maximum rated temperature. + + Unit: millidegree Celsius + + RO + +What: /sys/class/hwmon/hwmonX/currY_max +Description: + Current max value + + Unit: milliampere + + RW + +What: /sys/class/hwmon/hwmonX/currY_min +Description: + Current min value. + + Unit: milliampere + + RW + +What: /sys/class/hwmon/hwmonX/currY_lcrit +Description: + Current critical low value + + Unit: milliampere + + RW + +What: /sys/class/hwmon/hwmonX/currY_crit +Description: + Current critical high value. + + Unit: milliampere + + RW + +What: /sys/class/hwmon/hwmonX/currY_input +Description: + Current input value + + Unit: milliampere + + RO + +What: /sys/class/hwmon/hwmonX/currY_average +Description: + Average current use + + Unit: milliampere + + RO + +What: /sys/class/hwmon/hwmonX/currY_lowest +Description: + Historical minimum current + + Unit: milliampere + + RO + +What: /sys/class/hwmon/hwmonX/currY_highest +Description: + Historical maximum current + Unit: milliampere + RO + +What: /sys/class/hwmon/hwmonX/currY_reset_history +Description: + Reset currX_lowest and currX_highest + + WO + +What: /sys/class/hwmon/hwmonX/curr_reset_history +Description: + Reset currX_lowest and currX_highest for all sensors + + WO + +What: /sys/class/hwmon/hwmonX/currY_enable +Description: + Enable or disable the sensors. + + When disabled the sensor read will return -ENODATA. + + - 1: Enable + - 0: Disable + + RW + +What: /sys/class/hwmon/hwmonX/currY_rated_min +Description: + Minimum rated current. + + Unit: milliampere + + RO + +What: /sys/class/hwmon/hwmonX/currY_rated_max +Description: + Maximum rated current. + + Unit: milliampere + + RO + +What: /sys/class/hwmon/hwmonX/powerY_average +Description: + Average power use + + Unit: microWatt + + RO + +What: /sys/class/hwmon/hwmonX/powerY_average_interval +Description: + Power use averaging interval. A poll + notification is sent to this file if the + hardware changes the averaging interval. + + Unit: milliseconds + + RW + +What: /sys/class/hwmon/hwmonX/powerY_average_interval_max +Description: + Maximum power use averaging interval + + Unit: milliseconds + + RO + +What: /sys/class/hwmon/hwmonX/powerY_average_interval_min +Description: + Minimum power use averaging interval + + Unit: milliseconds + + RO + +What: /sys/class/hwmon/hwmonX/powerY_average_highest +Description: + Historical average maximum power use + + Unit: microWatt + + RO + +What: /sys/class/hwmon/hwmonX/powerY_average_lowest +Description: + Historical average minimum power use + + Unit: microWatt + + RO + +What: /sys/class/hwmon/hwmonX/powerY_average_max +Description: + A poll notification is sent to + `powerY_average` when power use + rises above this value. + + Unit: microWatt + + RW + +What: /sys/class/hwmon/hwmonX/powerY_average_min +Description: + A poll notification is sent to + `powerY_average` when power use + sinks below this value. + + Unit: microWatt + + RW + +What: /sys/class/hwmon/hwmonX/powerY_input +Description: + Instantaneous power use + + Unit: microWatt + + RO + +What: /sys/class/hwmon/hwmonX/powerY_input_highest +Description: + Historical maximum power use + + Unit: microWatt + + RO + +What: /sys/class/hwmon/hwmonX/powerY_input_lowest +Description: + Historical minimum power use + + Unit: microWatt + + RO + +What: /sys/class/hwmon/hwmonX/powerY_reset_history +Description: + Reset input_highest, input_lowest, + average_highest and average_lowest. + + WO + +What: /sys/class/hwmon/hwmonX/powerY_accuracy +Description: + Accuracy of the power meter. + + Unit: Percent + + RO + +What: /sys/class/hwmon/hwmonX/powerY_cap +Description: + If power use rises above this limit, the + system should take action to reduce power use. + A poll notification is sent to this file if the + cap is changed by the hardware. The `*_cap` + files only appear if the cap is known to be + enforced by hardware. + + Unit: microWatt + + RW + +What: /sys/class/hwmon/hwmonX/powerY_cap_hyst +Description: + Margin of hysteresis built around capping and + notification. + + Unit: microWatt + + RW + +What: /sys/class/hwmon/hwmonX/powerY_cap_max +Description: + Maximum cap that can be set. + + Unit: microWatt + + RO + +What: /sys/class/hwmon/hwmonX/powerY_cap_min +Description: + Minimum cap that can be set. + + Unit: microWatt + + RO + +What: /sys/class/hwmon/hwmonX/powerY_max +Description: + Maximum power. + + Unit: microWatt + + RW + +What: /sys/class/hwmon/hwmonX/powerY_crit +Description: + Critical maximum power. + + If power rises to or above this limit, the + system is expected take drastic action to reduce + power consumption, such as a system shutdown or + a forced powerdown of some devices. + + Unit: microWatt + + RW + +What: /sys/class/hwmon/hwmonX/powerY_enable +Description: + Enable or disable the sensors. + + When disabled the sensor read will return + -ENODATA. + + - 1: Enable + - 0: Disable + + RW + +What: /sys/class/hwmon/hwmonX/powerY_rated_min +Description: + Minimum rated power. + + Unit: microWatt + + RO + +What: /sys/class/hwmon/hwmonX/powerY_rated_max +Description: + Maximum rated power. + + Unit: microWatt + + RO + +What: /sys/class/hwmon/hwmonX/energyY_input +Description: + Cumulative energy use + + Unit: microJoule + + RO + +What: /sys/class/hwmon/hwmonX/energyY_enable +Description: + Enable or disable the sensors. + + When disabled the sensor read will return + -ENODATA. + + - 1: Enable + - 0: Disable + + RW + +What: /sys/class/hwmon/hwmonX/humidityY_input +Description: + Humidity + + Unit: milli-percent (per cent mille, pcm) + + RO + + +What: /sys/class/hwmon/hwmonX/humidityY_enable +Description: + Enable or disable the sensors + + When disabled the sensor read will return + -ENODATA. + + - 1: Enable + - 0: Disable + + RW + +What: /sys/class/hwmon/hwmonX/humidityY_rated_min +Description: + Minimum rated humidity. + + Unit: milli-percent (per cent mille, pcm) + + RO + +What: /sys/class/hwmon/hwmonX/humidityY_rated_max +Description: + Maximum rated humidity. + + Unit: milli-percent (per cent mille, pcm) + + RO + + +What: /sys/class/hwmon/hwmonX/intrusionY_alarm +Description: + Chassis intrusion detection + + - 0: OK + - 1: intrusion detected + + RW + + Contrary to regular alarm flags which clear themselves + automatically when read, this one sticks until cleared by + the user. This is done by writing 0 to the file. Writing + other values is unsupported. + +What: /sys/class/hwmon/hwmonX/intrusionY_beep +Description: + Chassis intrusion beep + + - 0: disable + - 1: enable + + RW + +What: /sys/class/hwmon/hwmonX/device/pec +Description: + PEC support on I2C devices + + - 0, off, n: disable + - 1, on, y: enable + + RW diff --git a/Documentation/ABI/testing/sysfs-class-intel_pmt b/Documentation/ABI/testing/sysfs-class-intel_pmt new file mode 100644 index 000000000..ed4c886a2 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-intel_pmt @@ -0,0 +1,119 @@ +What: /sys/class/intel_pmt/ +Date: October 2020 +KernelVersion: 5.10 +Contact: David Box <david.e.box@linux.intel.com> +Description: + The intel_pmt/ class directory contains information for + devices that expose hardware telemetry using Intel Platform + Monitoring Technology (PMT) + +What: /sys/class/intel_pmt/telem<x> +Date: October 2020 +KernelVersion: 5.10 +Contact: David Box <david.e.box@linux.intel.com> +Description: + The telem<x> directory contains files describing an instance of + a PMT telemetry device that exposes hardware telemetry. Each + telem<x> directory has an associated telem file. This file + may be opened and mapped or read to access the telemetry space + of the device. The register layout of the telemetry space is + determined from an XML file that matches the PCI device id and + GUID for the device. + +What: /sys/class/intel_pmt/telem<x>/telem +Date: October 2020 +KernelVersion: 5.10 +Contact: David Box <david.e.box@linux.intel.com> +Description: + (RO) The telemetry data for this telemetry device. This file + may be mapped or read to obtain the data. + +What: /sys/class/intel_pmt/telem<x>/guid +Date: October 2020 +KernelVersion: 5.10 +Contact: David Box <david.e.box@linux.intel.com> +Description: + (RO) The GUID for this telemetry device. The GUID identifies + the version of the XML file for the parent device that is to + be used to get the register layout. + +What: /sys/class/intel_pmt/telem<x>/size +Date: October 2020 +KernelVersion: 5.10 +Contact: David Box <david.e.box@linux.intel.com> +Description: + (RO) The size of telemetry region in bytes that corresponds to + the mapping size for the telem file. + +What: /sys/class/intel_pmt/telem<x>/offset +Date: October 2020 +KernelVersion: 5.10 +Contact: David Box <david.e.box@linux.intel.com> +Description: + (RO) The offset of telemetry region in bytes that corresponds to + the mapping for the telem file. + +What: /sys/class/intel_pmt/crashlog<x> +Date: October 2020 +KernelVersion: 5.10 +Contact: Alexander Duyck <alexander.h.duyck@linux.intel.com> +Description: + The crashlog<x> directory contains files for configuring an + instance of a PMT crashlog device that can perform crash data + recording. Each crashlog<x> device has an associated crashlog + file. This file can be opened and mapped or read to access the + resulting crashlog buffer. The register layout for the buffer + can be determined from an XML file of specified GUID for the + parent device. + +What: /sys/class/intel_pmt/crashlog<x>/crashlog +Date: October 2020 +KernelVersion: 5.10 +Contact: David Box <david.e.box@linux.intel.com> +Description: + (RO) The crashlog buffer for this crashlog device. This file + may be mapped or read to obtain the data. + +What: /sys/class/intel_pmt/crashlog<x>/guid +Date: October 2020 +KernelVersion: 5.10 +Contact: Alexander Duyck <alexander.h.duyck@linux.intel.com> +Description: + (RO) The GUID for this crashlog device. The GUID identifies the + version of the XML file for the parent device that should be + used to determine the register layout. + +What: /sys/class/intel_pmt/crashlog<x>/size +Date: October 2020 +KernelVersion: 5.10 +Contact: Alexander Duyck <alexander.h.duyck@linux.intel.com> +Description: + (RO) The length of the result buffer in bytes that corresponds + to the size for the crashlog buffer. + +What: /sys/class/intel_pmt/crashlog<x>/offset +Date: October 2020 +KernelVersion: 5.10 +Contact: Alexander Duyck <alexander.h.duyck@linux.intel.com> +Description: + (RO) The offset of the buffer in bytes that corresponds + to the mapping for the crashlog device. + +What: /sys/class/intel_pmt/crashlog<x>/enable +Date: October 2020 +KernelVersion: 5.10 +Contact: Alexander Duyck <alexander.h.duyck@linux.intel.com> +Description: + (RW) Boolean value controlling if the crashlog functionality + is enabled for the crashlog device. + +What: /sys/class/intel_pmt/crashlog<x>/trigger +Date: October 2020 +KernelVersion: 5.10 +Contact: Alexander Duyck <alexander.h.duyck@linux.intel.com> +Description: + (RW) Boolean value controlling the triggering of the crashlog + device node. When read it provides data on if the crashlog has + been triggered. When written to it can be used to either clear + the current trigger by writing false, or to trigger a new + event if the trigger is not currently set. diff --git a/Documentation/ABI/testing/sysfs-class-iommu b/Documentation/ABI/testing/sysfs-class-iommu new file mode 100644 index 000000000..6d0a1b4be --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-iommu @@ -0,0 +1,17 @@ +What: /sys/class/iommu/<iommu>/devices/ +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + IOMMU drivers are able to link devices managed by a + given IOMMU here to allow association of IOMMU to + device. + +What: /sys/devices/.../iommu +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + IOMMU drivers are able to link the IOMMU for a + given device here to allow association of device to + IOMMU. diff --git a/Documentation/ABI/testing/sysfs-class-iommu-amd-iommu b/Documentation/ABI/testing/sysfs-class-iommu-amd-iommu new file mode 100644 index 000000000..d6ba8e8a4 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-iommu-amd-iommu @@ -0,0 +1,14 @@ +What: /sys/class/iommu/<iommu>/amd-iommu/cap +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + IOMMU capability header as documented in the AMD IOMMU + specification. Format: %x + +What: /sys/class/iommu/<iommu>/amd-iommu/features +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + Extended features of the IOMMU. Format: %llx diff --git a/Documentation/ABI/testing/sysfs-class-iommu-intel-iommu b/Documentation/ABI/testing/sysfs-class-iommu-intel-iommu new file mode 100644 index 000000000..258cc246d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-iommu-intel-iommu @@ -0,0 +1,32 @@ +What: /sys/class/iommu/<iommu>/intel-iommu/address +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + Physical address of the VT-d DRHD for this IOMMU. + Format: %llx. This allows association of a sysfs + intel-iommu with a DMAR DRHD table entry. + +What: /sys/class/iommu/<iommu>/intel-iommu/cap +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + The cached hardware capability register value + of this DRHD unit. Format: %llx. + +What: /sys/class/iommu/<iommu>/intel-iommu/ecap +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + The cached hardware extended capability register + value of this DRHD unit. Format: %llx. + +What: /sys/class/iommu/<iommu>/intel-iommu/version +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson <alex.williamson@redhat.com> +Description: + The architecture version as reported from the + VT-d VER_REG. Format: %d:%d, major:minor diff --git a/Documentation/ABI/testing/sysfs-class-lcd b/Documentation/ABI/testing/sysfs-class-lcd new file mode 100644 index 000000000..35906bf7a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-lcd @@ -0,0 +1,23 @@ +What: /sys/class/lcd/<lcd>/lcd_power +Date: April 2005 +KernelVersion: 2.6.12 +Contact: Richard Purdie <rpurdie@rpsys.net> +Description: + Control LCD power, values are FB_BLANK_* from fb.h + - FB_BLANK_UNBLANK (0) : power on. + - FB_BLANK_POWERDOWN (4) : power off + +What: /sys/class/lcd/<lcd>/contrast +Date: April 2005 +KernelVersion: 2.6.12 +Contact: Richard Purdie <rpurdie@rpsys.net> +Description: + Current contrast of this LCD device. Value is between 0 and + /sys/class/lcd/<lcd>/max_contrast. + +What: /sys/class/lcd/<lcd>/max_contrast +Date: April 2005 +KernelVersion: 2.6.12 +Contact: Richard Purdie <rpurdie@rpsys.net> +Description: + Maximum contrast for this LCD device. diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led new file mode 100644 index 000000000..2e24ac3bd --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led @@ -0,0 +1,83 @@ +What: /sys/class/leds/<led>/brightness +Date: March 2006 +KernelVersion: 2.6.17 +Contact: Richard Purdie <rpurdie@rpsys.net> +Description: + Set the brightness of the LED. + + Most LEDs don't have hardware brightness support, so will + just be turned on for non-zero brightness settings. + + .. Note:: + + For multicolor LEDs, writing to this file will update all + LEDs within the group to a calculated percentage of what + each color LED intensity is set to. + + The percentage is calculated for each grouped LED via + the equation below:: + + led_brightness = brightness * multi_intensity/max_brightness + + For additional details please refer to + Documentation/leds/leds-class-multicolor.rst. + + The value is between 0 and + /sys/class/leds/<led>/max_brightness. + + Writing 0 to this file clears active trigger. + + Writing non-zero to this file while trigger is active changes the + top brightness trigger is going to use. + + + +What: /sys/class/leds/<led>/max_brightness +Date: March 2006 +KernelVersion: 2.6.17 +Contact: Richard Purdie <rpurdie@rpsys.net> +Description: + Maximum brightness level for this LED, default is 255 (LED_FULL). + + If the LED does not support different brightness levels, this + should be 1. + +What: /sys/class/leds/<led>/brightness_hw_changed +Date: January 2017 +KernelVersion: 4.11 +Description: + Last hardware set brightness level for this LED. Some LEDs + may be changed autonomously by hardware/firmware. Only LEDs + where this happens and the driver can detect this, will have + this file. + + This file supports poll() to detect when the hardware changes + the brightness. + + Reading this file will return the last brightness level set + by the hardware, this may be different from the current + brightness. Reading this file when no hw brightness change + event has happened will return an ENODATA error. + +What: /sys/class/leds/<led>/trigger +Date: March 2006 +KernelVersion: 2.6.17 +Contact: Richard Purdie <rpurdie@rpsys.net> +Description: + Set the trigger for this LED. A trigger is a kernel based source + of LED events. + + You can change triggers in a similar manner to the way an IO + scheduler is chosen. Trigger specific parameters can appear in + /sys/class/leds/<led> once a given trigger is selected. For + their documentation see `sysfs-class-led-trigger-*`. + +What: /sys/class/leds/<led>/inverted +Date: January 2011 +KernelVersion: 2.6.38 +Contact: Richard Purdie <rpurdie@rpsys.net> +Description: + Invert the LED on/off state. This parameter is specific to + gpio and backlight triggers. In case of the backlight trigger, + it is useful when driving a LED which is intended to indicate + a device in a standby like state. diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 b/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 new file mode 100644 index 000000000..e38a835d0 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-driver-lm3533 @@ -0,0 +1,73 @@ +What: /sys/class/leds/<led>/als_channel +Date: May 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the ALS output channel to use as input in + ALS-current-control mode (1, 2), where: + + == ============ + 1 out_current1 + 2 out_current2 + == ============ + +What: /sys/class/leds/<led>/als_en +Date: May 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Enable ALS-current-control mode (0, 1). + +What: /sys/class/leds/<led>/falltime +What: /sys/class/leds/<led>/risetime +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the pattern generator fall and rise times (0..7), where: + + == ======= + 0 2048 us + 1 262 ms + 2 524 ms + 3 1.049 s + 4 2.097 s + 5 4.194 s + 6 8.389 s + 7 16.78 s + == ======= + +What: /sys/class/leds/<led>/id +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Get the id of this led (0..3). + +What: /sys/class/leds/<led>/linear +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the brightness-mapping mode (0, 1), where: + + == ================ + 0 exponential mode + 1 linear mode + == ================ + +What: /sys/class/leds/<led>/pwm +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the PWM-input control mask (5 bits), where: + + ===== =========================== + bit 5 PWM-input enabled in Zone 4 + bit 4 PWM-input enabled in Zone 3 + bit 3 PWM-input enabled in Zone 2 + bit 2 PWM-input enabled in Zone 1 + bit 1 PWM-input enabled in Zone 0 + bit 0 PWM-input enabled + ===== =========================== diff --git a/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia b/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia new file mode 100644 index 000000000..c4d46970c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia @@ -0,0 +1,14 @@ +What: /sys/class/leds/<led>/device/brightness +Date: July 2020 +KernelVersion: 5.9 +Contact: Marek Behún <kabel@kernel.org> +Description: (RW) On the front panel of the Turris Omnia router there is also + a button which can be used to control the intensity of all the + LEDs at once, so that if they are too bright, user can dim them. + + The microcontroller cycles between 8 levels of this global + brightness (from 100% to 0%), but this setting can have any + integer value between 0 and 100. It is therefore convenient to be + able to change this setting from software. + + Format: %i diff --git a/Documentation/ABI/testing/sysfs-class-led-flash b/Documentation/ABI/testing/sysfs-class-led-flash new file mode 100644 index 000000000..11e5677c3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-flash @@ -0,0 +1,89 @@ +What: /sys/class/leds/<led>/flash_brightness +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski <j.anaszewski@samsung.com> +Description: read/write + Set the brightness of this LED in the flash strobe mode, in + microamperes. The file is created only for the flash LED devices + that support setting flash brightness. + + The value is between 0 and + /sys/class/leds/<led>/max_flash_brightness. + +What: /sys/class/leds/<led>/max_flash_brightness +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski <j.anaszewski@samsung.com> +Description: read only + Maximum brightness level for this LED in the flash strobe mode, + in microamperes. + +What: /sys/class/leds/<led>/flash_timeout +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski <j.anaszewski@samsung.com> +Description: read/write + Hardware timeout for flash, in microseconds. The flash strobe + is stopped after this period of time has passed from the start + of the strobe. The file is created only for the flash LED + devices that support setting flash timeout. + +What: /sys/class/leds/<led>/max_flash_timeout +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski <j.anaszewski@samsung.com> +Description: read only + Maximum flash timeout for this LED, in microseconds. + +What: /sys/class/leds/<led>/flash_strobe +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski <j.anaszewski@samsung.com> +Description: read/write + Flash strobe state. When written with 1 it triggers flash strobe + and when written with 0 it turns the flash off. + + On read 1 means that flash is currently strobing and 0 means + that flash is off. + +What: /sys/class/leds/<led>/flash_fault +Date: March 2015 +KernelVersion: 4.0 +Contact: Jacek Anaszewski <j.anaszewski@samsung.com> +Description: read only + Space separated list of flash faults that may have occurred. + Flash faults are re-read after strobing the flash. Possible + flash faults: + + * led-over-voltage + flash controller voltage to the flash LED + has exceeded the limit specific to the flash controller + * flash-timeout-exceeded + the flash strobe was still on when + the timeout set by the user has expired; not all flash + controllers may set this in all such conditions + * controller-over-temperature + the flash controller has + overheated + * controller-short-circuit + the short circuit protection + of the flash controller has been triggered + * led-power-supply-over-current + current in the LED power + supply has exceeded the limit specific to the flash + controller + * indicator-led-fault + the flash controller has detected + a short or open circuit condition on the indicator LED + * led-under-voltage + flash controller voltage to the flash + LED has been below the minimum limit specific to + the flash + * controller-under-voltage + the input voltage of the flash + controller is below the limit under which strobing the + flash at full current will not be possible; + the condition persists until this flag is no longer set + * led-over-temperature + the temperature of the LED has exceeded + its allowed upper limit diff --git a/Documentation/ABI/testing/sysfs-class-led-multicolor b/Documentation/ABI/testing/sysfs-class-led-multicolor new file mode 100644 index 000000000..16fc827b1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-multicolor @@ -0,0 +1,24 @@ + +What: /sys/class/leds/<led>/multi_index +Date: March 2020 +KernelVersion: 5.9 +Contact: Dan Murphy <dmurphy@ti.com> +Description: read + The multi_index array, when read, will output the LED colors + as an array of strings as they are indexed in the + multi_intensity file. + + For additional details please refer to + Documentation/leds/leds-class-multicolor.rst. + +What: /sys/class/leds/<led>/multi_intensity +Date: March 2020 +KernelVersion: 5.9 +Contact: Dan Murphy <dmurphy@ti.com> +Description: read/write + This file contains array of integers. Order of components is + described by the multi_index array. The maximum intensity should + not exceed /sys/class/leds/<led>/max_brightness. + + For additional details please refer to + Documentation/leds/leds-class-multicolor.rst. diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev new file mode 100644 index 000000000..646540950 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -0,0 +1,52 @@ +What: /sys/class/leds/<led>/device_name +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the network device name to monitor. + +What: /sys/class/leds/<led>/interval +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the duration of the LED blink in milliseconds. + Defaults to 50 ms. + +What: /sys/class/leds/<led>/link +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + of the named network device. + Setting this value also immediately changes the LED state. + + +What: /sys/class/leds/<led>/tx +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal transmission of data on the named network device. + + If set to 0 (default), the LED will not blink on transmission. + + If set to 1, the LED will blink for the milliseconds specified + in interval to signal transmission. + +What: /sys/class/leds/<led>/rx +Date: Dec 2017 +KernelVersion: 4.16 +Contact: linux-leds@vger.kernel.org +Description: + Signal reception of data on the named network device. + + If set to 0 (default), the LED will not blink on reception. + + If set to 1, the LED will blink for the milliseconds specified + in interval to signal reception. diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-oneshot b/Documentation/ABI/testing/sysfs-class-led-trigger-oneshot new file mode 100644 index 000000000..378a3a4df --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-oneshot @@ -0,0 +1,36 @@ +What: /sys/class/leds/<led>/delay_on +Date: Jun 2012 +KernelVersion: 3.6 +Contact: linux-leds@vger.kernel.org +Description: + Specifies for how many milliseconds the LED has to stay at + LED_FULL brightness after it has been armed. + Defaults to 100 ms. + +What: /sys/class/leds/<led>/delay_off +Date: Jun 2012 +KernelVersion: 3.6 +Contact: linux-leds@vger.kernel.org +Description: + Specifies for how many milliseconds the LED has to stay at + LED_OFF brightness after it has been armed. + Defaults to 100 ms. + +What: /sys/class/leds/<led>/invert +Date: Jun 2012 +KernelVersion: 3.6 +Contact: linux-leds@vger.kernel.org +Description: + Reverse the blink logic. If set to 0 (default) blink on for + delay_on ms, then blink off for delay_off ms, leaving the LED + normally off. If set to 1, blink off for delay_off ms, then + blink on for delay_on ms, leaving the LED normally on. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/shot +Date: Jun 2012 +KernelVersion: 3.6 +Contact: linux-leds@vger.kernel.org +Description: + Write any non-empty string to signal an events, this starts a + blink sequence if not already running. diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern new file mode 100644 index 000000000..8c57d2780 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern @@ -0,0 +1,40 @@ +What: /sys/class/leds/<led>/pattern +Date: September 2018 +KernelVersion: 4.20 +Description: + Specify a software pattern for the LED, that supports altering + the brightness for the specified duration with one software + timer. It can do gradual dimming and step change of brightness. + + The pattern is given by a series of tuples, of brightness and + duration (ms). + + The exact format is described in: + Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt + +What: /sys/class/leds/<led>/hw_pattern +Date: September 2018 +KernelVersion: 4.20 +Description: + Specify a hardware pattern for the LED, for LED hardware that + supports autonomously controlling brightness over time, according + to some preprogrammed hardware patterns. It deactivates any active + software pattern. + + Since different LED hardware can have different semantics of + hardware patterns, each driver is expected to provide its own + description for the hardware patterns in their documentation + file at Documentation/leds/. + +What: /sys/class/leds/<led>/repeat +Date: September 2018 +KernelVersion: 4.20 +Description: + Specify a pattern repeat number. -1 means repeat indefinitely, + other negative numbers and number 0 are invalid. + + This file will always return the originally written repeat + number. + + It should be noticed that some leds, like EL15203000 may + only support indefinitely patterns, so they always store -1. diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-tty b/Documentation/ABI/testing/sysfs-class-led-trigger-tty new file mode 100644 index 000000000..2bf6b24e7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-tty @@ -0,0 +1,6 @@ +What: /sys/class/leds/<led>/ttyname +Date: Dec 2020 +KernelVersion: 5.10 +Contact: linux-leds@vger.kernel.org +Description: + Specifies the tty device name of the triggering tty diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-usbport b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport new file mode 100644 index 000000000..eb81152b8 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-usbport @@ -0,0 +1,13 @@ +What: /sys/class/leds/<led>/ports/<port> +Date: September 2016 +KernelVersion: 4.9 +Contact: linux-leds@vger.kernel.org + linux-usb@vger.kernel.org +Description: + Every dir entry represents a single USB port that can be + selected for the USB port trigger. Selecting ports makes trigger + observing them for any connected devices and lighting on LED if + there are any. + + Echoing "1" value selects USB port. Echoing "0" unselects it. + Current state can be also read. diff --git a/Documentation/ABI/testing/sysfs-class-leds-gt683r b/Documentation/ABI/testing/sysfs-class-leds-gt683r new file mode 100644 index 000000000..b57ffb26e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-leds-gt683r @@ -0,0 +1,18 @@ +What: /sys/class/leds/<led>/gt683r/mode +Date: Jun 2014 +KernelVersion: 3.17 +Contact: Janne Kanniainen <janne.kanniainen@gmail.com> +Description: + Set the mode of LEDs. You should notice that changing the mode + of one LED will update the mode of its two sibling devices as + well. Possible values are: + + == ========= + 0 normal + 1 audio + 2 breathing + == ========= + + Normal: LEDs are fully on when enabled + Audio: LEDs brightness depends on sound level + Breathing: LEDs brightness varies at human breathing rate diff --git a/Documentation/ABI/testing/sysfs-class-mei b/Documentation/ABI/testing/sysfs-class-mei new file mode 100644 index 000000000..1db36ddf8 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-mei @@ -0,0 +1,105 @@ +What: /sys/class/mei/ +Date: May 2014 +KernelVersion: 3.17 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: + The mei/ class sub-directory belongs to mei device class + + +What: /sys/class/mei/mei<N>/ +Date: May 2014 +KernelVersion: 3.17 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: + The /sys/class/mei/meiN directory is created for + each probed mei device + +What: /sys/class/mei/mei<N>/fw_status +Date: Nov 2014 +KernelVersion: 3.19 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: Display fw status registers content + + The ME FW writes its status information into fw status + registers for BIOS and OS to monitor fw health. + + The register contains running state, power management + state, error codes, and others. The way the registers + are decoded depends on PCH or SoC generation. + Also number of registers varies between 1 and 6 + depending on generation. + +What: /sys/class/mei/mei<N>/hbm_ver +Date: Aug 2016 +KernelVersion: 4.9 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: Display the negotiated HBM protocol version. + + The HBM protocol version negotiated + between the driver and the device. + +What: /sys/class/mei/mei<N>/hbm_ver_drv +Date: Aug 2016 +KernelVersion: 4.9 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: Display the driver HBM protocol version. + + The HBM protocol version supported by the driver. + +What: /sys/class/mei/mei<N>/tx_queue_limit +Date: Jan 2018 +KernelVersion: 4.16 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: Configure tx queue limit + + Set maximal number of pending writes + per opened session. + +What: /sys/class/mei/mei<N>/fw_ver +Date: May 2018 +KernelVersion: 4.18 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: Display the ME firmware version. + + The version of the platform ME firmware is in format: + <platform>:<major>.<minor>.<milestone>.<build_no>. + There can be up to three such blocks for different + FW components. + +What: /sys/class/mei/mei<N>/dev_state +Date: Mar 2019 +KernelVersion: 5.1 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: Display the ME device state. + + The device state can have following values: + INITIALIZING + INIT_CLIENTS + ENABLED + RESETTING + DISABLED + POWER_DOWN + POWER_UP + +What: /sys/class/mei/mei<N>/trc +Date: Nov 2019 +KernelVersion: 5.5 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: Display trc status register content + + The ME FW writes Glitch Detection HW (TRC) + status information into trc status register + for BIOS and OS to monitor fw health. + +What: /sys/class/mei/mei<N>/kind +Date: Jul 2020 +KernelVersion: 5.8 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: Display kind of the device + + Generic devices are marked as "mei" + while special purpose have their own + names. + Available options: + - mei: generic mei device. + - itouch: itouch (ipts) mei device. diff --git a/Documentation/ABI/testing/sysfs-class-mic b/Documentation/ABI/testing/sysfs-class-mic new file mode 100644 index 000000000..5e5f36d10 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-mic @@ -0,0 +1,178 @@ +What: /sys/class/mic/ +Date: October 2013 +KernelVersion: 3.13 +Contact: Sudeep Dutt <sudeep.dutt@intel.com> +Description: + The mic class directory belongs to Intel MIC devices and + provides information per MIC device. An Intel MIC device is a + PCIe form factor add-in Coprocessor card based on the Intel Many + Integrated Core (MIC) architecture that runs a Linux OS. + +What: /sys/class/mic/mic<X> +Date: October 2013 +KernelVersion: 3.13 +Contact: Sudeep Dutt <sudeep.dutt@intel.com> +Description: + The directories /sys/class/mic/mic0, /sys/class/mic/mic1 etc., + represent MIC devices (0,1,..etc). Each directory has + information specific to that MIC device. + +What: /sys/class/mic/mic<X>/family +Date: October 2013 +KernelVersion: 3.13 +Contact: Sudeep Dutt <sudeep.dutt@intel.com> +Description: + Provides information about the Coprocessor family for an Intel + MIC device. For example - "x100" + +What: /sys/class/mic/mic<X>/stepping +Date: October 2013 +KernelVersion: 3.13 +Contact: Sudeep Dutt <sudeep.dutt@intel.com> +Description: + Provides information about the silicon stepping for an Intel + MIC device. For example - "A0" or "B0" + +What: /sys/class/mic/mic<X>/state +Date: October 2013 +KernelVersion: 3.13 +Contact: Sudeep Dutt <sudeep.dutt@intel.com> +Description: + When read, this entry provides the current state of an Intel + MIC device in the context of the card OS. Possible values that + will be read are: + + + =============== =============================================== + "ready" The MIC device is ready to boot the card OS. + On reading this entry after an OSPM resume, + a "boot" has to be written to this entry if + the card was previously shutdown during OSPM + suspend. + "booting" The MIC device has initiated booting a card OS. + "online" The MIC device has completed boot and is online + "shutting_down" The card OS is shutting down. + "resetting" A reset has been initiated for the MIC device + "reset_failed" The MIC device has failed to reset. + =============== =============================================== + + When written, this sysfs entry triggers different state change + operations depending upon the current state of the card OS. + Acceptable values are: + + + ========== =================================================== + "boot" Boot the card OS image specified by the combination + of firmware, ramdisk, cmdline and bootmode + sysfs entries. + "reset" Initiates device reset. + "shutdown" Initiates card OS shutdown. + ========== =================================================== + +What: /sys/class/mic/mic<X>/shutdown_status +Date: October 2013 +KernelVersion: 3.13 +Contact: Sudeep Dutt <sudeep.dutt@intel.com> +Description: + An Intel MIC device runs a Linux OS during its operation. This + OS can shutdown because of various reasons. When read, this + entry provides the status on why the card OS was shutdown. + Possible values are: + + ========== =================================================== + "nop" shutdown status is not applicable, when the card OS + is "online" + "crashed" Shutdown because of a HW or SW crash. + "halted" Shutdown because of a halt command. + "poweroff" Shutdown because of a poweroff command. + "restart" Shutdown because of a restart command. + ========== =================================================== + +What: /sys/class/mic/mic<X>/cmdline +Date: October 2013 +KernelVersion: 3.13 +Contact: Sudeep Dutt <sudeep.dutt@intel.com> +Description: + An Intel MIC device runs a Linux OS during its operation. Before + booting this card OS, it is possible to pass kernel command line + options to configure various features in it, similar to + self-bootable machines. When read, this entry provides + information about the current kernel command line options set to + boot the card OS. This entry can be written to change the + existing kernel command line options. Typically, the user would + want to read the current command line options, append new ones + or modify existing ones and then write the whole kernel command + line back to this entry. + +What: /sys/class/mic/mic<X>/firmware +Date: October 2013 +KernelVersion: 3.13 +Contact: Sudeep Dutt <sudeep.dutt@intel.com> +Description: + When read, this sysfs entry provides the path name under + /lib/firmware/ where the firmware image to be booted on the + card can be found. The entry can be written to change the + firmware image location under /lib/firmware/. + +What: /sys/class/mic/mic<X>/ramdisk +Date: October 2013 +KernelVersion: 3.13 +Contact: Sudeep Dutt <sudeep.dutt@intel.com> +Description: + When read, this sysfs entry provides the path name under + /lib/firmware/ where the ramdisk image to be used during card + OS boot can be found. The entry can be written to change + the ramdisk image location under /lib/firmware/. + +What: /sys/class/mic/mic<X>/bootmode +Date: October 2013 +KernelVersion: 3.13 +Contact: Sudeep Dutt <sudeep.dutt@intel.com> +Description: + When read, this sysfs entry provides the current bootmode for + the card. This sysfs entry can be written with the following + valid strings: + a) linux - Boot a Linux image. + b) flash - Boot an image for flash updates. + +What: /sys/class/mic/mic<X>/log_buf_addr +Date: October 2013 +KernelVersion: 3.13 +Contact: Sudeep Dutt <sudeep.dutt@intel.com> +Description: + An Intel MIC device runs a Linux OS during its operation. For + debugging purpose and early kernel boot messages, the user can + access the card OS log buffer via debugfs. When read, this entry + provides the kernel virtual address of the buffer where the card + OS log buffer can be read. This entry is written by the host + configuration daemon to set the log buffer address. The correct + log buffer address to be written can be found in the System.map + file of the card OS. + +What: /sys/class/mic/mic<X>/log_buf_len +Date: October 2013 +KernelVersion: 3.13 +Contact: Sudeep Dutt <sudeep.dutt@intel.com> +Description: + An Intel MIC device runs a Linux OS during its operation. For + debugging purpose and early kernel boot messages, the user can + access the card OS log buffer via debugfs. When read, this entry + provides the kernel virtual address where the card OS log buffer + length can be read. This entry is written by host configuration + daemon to set the log buffer length address. The correct log + buffer length address to be written can be found in the + System.map file of the card OS. + +What: /sys/class/mic/mic<X>/heartbeat_enable +Date: March 2015 +KernelVersion: 4.4 +Contact: Ashutosh Dixit <ashutosh.dixit@intel.com> +Description: + The MIC drivers detect and inform user space about card crashes + via a heartbeat mechanism (see the description of + shutdown_status above). User space can turn off this + notification by setting heartbeat_enable to 0 and enable it by + setting this entry to 1. If this notification is disabled it is + the responsibility of user space to detect card crashes via + alternative means such as a network ping. This setting is + enabled by default. diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd new file mode 100644 index 000000000..3bc7c0a95 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-mtd @@ -0,0 +1,242 @@ +What: /sys/class/mtd/ +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + The mtd/ class subdirectory belongs to the MTD subsystem + (MTD core). + +What: /sys/class/mtd/mtdX/ +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + The /sys/class/mtd/mtd{0,1,2,3,...} directories correspond + to each /dev/mtdX character device. These may represent + physical/simulated flash devices, partitions on a flash + device, or concatenated flash devices. + +What: /sys/class/mtd/mtdXro/ +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + These directories provide the corresponding read-only device + nodes for /sys/class/mtd/mtdX/ . + +What: /sys/class/mtd/mtdX/dev +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + Major and minor numbers of the character device corresponding + to this MTD device (in <major>:<minor> format). This is the + read-write device so <minor> will be even. + +What: /sys/class/mtd/mtdXro/dev +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + Major and minor numbers of the character device corresponding + to the read-only variant of thie MTD device (in + <major>:<minor> format). In this case <minor> will be odd. + +What: /sys/class/mtd/mtdX/erasesize +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + "Major" erase size for the device. If numeraseregions is + zero, this is the eraseblock size for the entire device. + Otherwise, the MEMGETREGIONCOUNT/MEMGETREGIONINFO ioctls + can be used to determine the actual eraseblock layout. + +What: /sys/class/mtd/mtdX/flags +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + A hexadecimal value representing the device flags, ORed + together: + + 0x0400: MTD_WRITEABLE - device is writable + 0x0800: MTD_BIT_WRITEABLE - single bits can be flipped + 0x1000: MTD_NO_ERASE - no erase necessary + 0x2000: MTD_POWERUP_LOCK - always locked after reset + +What: /sys/class/mtd/mtdX/name +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + A human-readable ASCII name for the device or partition. + This will match the name in /proc/mtd . + +What: /sys/class/mtd/mtdX/numeraseregions +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + For devices that have variable eraseblock sizes, this + provides the total number of erase regions. Otherwise, + it will read back as zero. + +What: /sys/class/mtd/mtdX/oobsize +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + Number of OOB bytes per page. + +What: /sys/class/mtd/mtdX/size +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + Total size of the device/partition, in bytes. + +What: /sys/class/mtd/mtdX/type +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + One of the following ASCII strings, representing the device + type: + + absent, ram, rom, nor, nand, mlc-nand, dataflash, ubi, unknown + +What: /sys/class/mtd/mtdX/writesize +Date: April 2009 +KernelVersion: 2.6.29 +Contact: linux-mtd@lists.infradead.org +Description: + Minimal writable flash unit size. This will always be + a positive integer. + + In the case of NOR flash it is 1 (even though individual + bits can be cleared). + + In the case of NAND flash it is one NAND page (or a + half page, or a quarter page). + + In the case of ECC NOR, it is the ECC block size. + +What: /sys/class/mtd/mtdX/ecc_strength +Date: April 2012 +KernelVersion: 3.4 +Contact: linux-mtd@lists.infradead.org +Description: + Maximum number of bit errors that the device is capable of + correcting within each region covering an ECC step (see + ecc_step_size). This will always be a non-negative integer. + + In the case of devices lacking any ECC capability, it is 0. + +What: /sys/class/mtd/mtdX/bitflip_threshold +Date: April 2012 +KernelVersion: 3.4 +Contact: linux-mtd@lists.infradead.org +Description: + This allows the user to examine and adjust the criteria by which + mtd returns -EUCLEAN from mtd_read() and mtd_read_oob(). If the + maximum number of bit errors that were corrected on any single + region comprising an ecc step (as reported by the driver) equals + or exceeds this value, -EUCLEAN is returned. Otherwise, absent + an error, 0 is returned. Higher layers (e.g., UBI) use this + return code as an indication that an erase block may be + degrading and should be scrutinized as a candidate for being + marked as bad. + + The initial value may be specified by the flash device driver. + If not, then the default value is ecc_strength. + + The introduction of this feature brings a subtle change to the + meaning of the -EUCLEAN return code. Previously, it was + interpreted to mean simply "one or more bit errors were + corrected". Its new interpretation can be phrased as "a + dangerously high number of bit errors were corrected on one or + more regions comprising an ecc step". The precise definition of + "dangerously high" can be adjusted by the user with + bitflip_threshold. Users are discouraged from doing this, + however, unless they know what they are doing and have intimate + knowledge of the properties of their device. Broadly speaking, + bitflip_threshold should be low enough to detect genuine erase + block degradation, but high enough to avoid the consequences of + a persistent return value of -EUCLEAN on devices where sticky + bitflips occur. Note that if bitflip_threshold exceeds + ecc_strength, -EUCLEAN is never returned by the read operations. + Conversely, if bitflip_threshold is zero, -EUCLEAN is always + returned, absent a hard error. + + This is generally applicable only to NAND flash devices with ECC + capability. It is ignored on devices lacking ECC capability; + i.e., devices for which ecc_strength is zero. + +What: /sys/class/mtd/mtdX/ecc_step_size +Date: May 2013 +KernelVersion: 3.10 +Contact: linux-mtd@lists.infradead.org +Description: + The size of a single region covered by ECC, known as the ECC + step. Devices may have several equally sized ECC steps within + each writesize region. + + It will always be a non-negative integer. In the case of + devices lacking any ECC capability, it is 0. + +What: /sys/class/mtd/mtdX/ecc_failures +Date: June 2014 +KernelVersion: 3.17 +Contact: linux-mtd@lists.infradead.org +Description: + The number of failures reported by this device's ECC. Typically, + these failures are associated with failed read operations. + + It will always be a non-negative integer. In the case of + devices lacking any ECC capability, it is 0. + +What: /sys/class/mtd/mtdX/corrected_bits +Date: June 2014 +KernelVersion: 3.17 +Contact: linux-mtd@lists.infradead.org +Description: + The number of bits that have been corrected by means of the + device's ECC. + + It will always be a non-negative integer. In the case of + devices lacking any ECC capability, it is 0. + +What: /sys/class/mtd/mtdX/bad_blocks +Date: June 2014 +KernelVersion: 3.17 +Contact: linux-mtd@lists.infradead.org +Description: + The number of blocks marked as bad, if any, in this partition. + +What: /sys/class/mtd/mtdX/bbt_blocks +Date: June 2014 +KernelVersion: 3.17 +Contact: linux-mtd@lists.infradead.org +Description: + The number of blocks that are marked as reserved, if any, in + this partition. These are typically used to store the in-flash + bad block table (BBT). + +What: /sys/class/mtd/mtdX/offset +Date: March 2015 +KernelVersion: 4.1 +Contact: linux-mtd@lists.infradead.org +Description: + For a partition, the offset of that partition from the start + of the parent (another partition or a flash device) in bytes. + This attribute is absent on flash devices, so it can be used + to distinguish them from partitions. + +What: /sys/class/mtd/mtdX/oobavail +Date: April 2018 +KernelVersion: 4.16 +Contact: linux-mtd@lists.infradead.org +Description: + Number of bytes available for a client to place data into + the out of band area. diff --git a/Documentation/ABI/testing/sysfs-class-mux b/Documentation/ABI/testing/sysfs-class-mux new file mode 100644 index 000000000..c58b7b6e1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-mux @@ -0,0 +1,16 @@ +What: /sys/class/mux/ +Date: April 2017 +KernelVersion: 4.13 +Contact: Peter Rosin <peda@axentia.se> +Description: + The mux/ class sub-directory belongs to the Generic MUX + Framework and provides a sysfs interface for using MUX + controllers. + +What: /sys/class/mux/muxchip<N>/ +Date: April 2017 +KernelVersion: 4.13 +Contact: Peter Rosin <peda@axentia.se> +Description: + A /sys/class/mux/muxchipN directory is created for each + probed MUX chip where N is a simple enumeration. diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net new file mode 100644 index 000000000..1419103d1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-net @@ -0,0 +1,354 @@ +What: /sys/class/net/<iface>/name_assign_type +Date: July 2014 +KernelVersion: 3.17 +Contact: netdev@vger.kernel.org +Description: + Indicates the name assignment type. Possible values are: + + == ========================================================== + 1 enumerated by the kernel, possibly in an unpredictable way + 2 predictably named by the kernel + 3 named by userspace + 4 renamed + == ========================================================== + +What: /sys/class/net/<iface>/addr_assign_type +Date: July 2010 +KernelVersion: 3.2 +Contact: netdev@vger.kernel.org +Description: + Indicates the address assignment type. Possible values are: + + == ============================= + 0 permanent address + 1 randomly generated + 2 stolen from another device + 3 set using dev_set_mac_address + == ============================= + +What: /sys/class/net/<iface>/addr_len +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the hardware address size in bytes. + Values vary based on the lower-level protocol used by the + interface (Ethernet, FDDI, ATM, IEEE 802.15.4...). See + include/uapi/linux/if_*.h for actual values. + +What: /sys/class/net/<iface>/address +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Hardware address currently assigned to this interface. + Format is a string, e.g: 00:11:22:33:44:55 for an Ethernet MAC + address. + +What: /sys/class/net/<bridge iface>/bridge/group_fwd_mask +Date: January 2012 +KernelVersion: 3.2 +Contact: netdev@vger.kernel.org +Description: + Bitmask to allow forwarding of link local frames with address + 01-80-C2-00-00-0X on a bridge device. Only values that set bits + not matching BR_GROUPFWD_RESTRICTED in net/bridge/br_private.h + allowed. + Default value 0 does not forward any link local frames. + + Restricted bits: + + == ======================================================== + 0 01-80-C2-00-00-00 Bridge Group Address used for STP + 1 01-80-C2-00-00-01 (MAC Control) 802.3 used for MAC PAUSE + 2 01-80-C2-00-00-02 (Link Aggregation) 802.3ad + == ======================================================== + + Any values not setting these bits can be used. Take special + care when forwarding control frames e.g. 802.1X-PAE or LLDP. + +What: /sys/class/net/<iface>/broadcast +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Hardware broadcast address for this interface. Format is a + string, e.g: ff:ff:ff:ff:ff:ff for an Ethernet broadcast MAC + address. + +What: /sys/class/net/<iface>/carrier +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the current physical link state of the interface. + Posssible values are: + + == ===================== + 0 physical link is down + 1 physical link is up + == ===================== + + Note: some special devices, e.g: bonding and team drivers will + allow this attribute to be written to force a link state for + operating correctly and designating another fallback interface. + +What: /sys/class/net/<iface>/dev_id +Date: April 2008 +KernelVersion: 2.6.26 +Contact: netdev@vger.kernel.org +Description: + Indicates the device unique identifier. Format is an hexadecimal + value. This is used to disambiguate interfaces which might be + stacked (e.g: VLAN interfaces) but still have the same MAC + address as their parent device. + +What: /sys/class/net/<iface>/dev_port +Date: February 2014 +KernelVersion: 3.15 +Contact: netdev@vger.kernel.org +Description: + Indicates the port number of this network device, formatted + as a decimal value. Some NICs have multiple independent ports + on the same PCI bus, device and function. This attribute allows + userspace to distinguish the respective interfaces. + + Note: some device drivers started to use 'dev_id' for this + purpose since long before 3.15 and have not adopted the new + attribute ever since. To query the port number, some tools look + exclusively at 'dev_port', while others only consult 'dev_id'. + If a network device has multiple client adapter ports as + described in the previous paragraph and does not set this + attribute to its port number, it's a kernel bug. + +What: /sys/class/net/<iface>/dormant +Date: March 2006 +KernelVersion: 2.6.17 +Contact: netdev@vger.kernel.org +Description: + Indicates whether the interface is in dormant state. Possible + values are: + 0: interface is not dormant + 1: interface is dormant + + This attribute can be used by supplicant software to signal that + the device is not usable unless some supplicant-based + authentication is performed (e.g: 802.1x). 'link_mode' attribute + will also reflect the dormant state. + +What: /sys/class/net/<iface>/testing +Date: April 2002 +KernelVersion: 5.8 +Contact: netdev@vger.kernel.org +Description: + Indicates whether the interface is under test. Possible + values are: + + == ============================= + 0 interface is not being tested + 1 interface is being tested + == ============================= + + When an interface is under test, it cannot be expected + to pass packets as normal. + +What: /sys/class/net/<iface>/duplex +Date: October 2009 +KernelVersion: 2.6.33 +Contact: netdev@vger.kernel.org +Description: + Indicates the interface latest or current duplex value. Possible + values are: + + ==== =========== + half half duplex + full full duplex + ==== =========== + + Note: This attribute is only valid for interfaces that implement + the ethtool get_link_ksettings method (mostly Ethernet). + +What: /sys/class/net/<iface>/flags +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the interface flags as a bitmask in hexadecimal. See + include/uapi/linux/if.h for a list of all possible values and + the flags semantics. + +What: /sys/class/net/<iface>/ifalias +Date: September 2008 +KernelVersion: 2.6.28 +Contact: netdev@vger.kernel.org +Description: + Indicates/stores an interface alias name as a string. This can + be used for system management purposes. + +What: /sys/class/net/<iface>/ifindex +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the system-wide interface unique index identifier as a + decimal number. This attribute is used for mapping an interface + identifier to an interface name. It is used throughout the + networking stack for specifying the interface specific + requests/events. + +What: /sys/class/net/<iface>/iflink +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the system-wide interface unique index identifier a + the interface is linked to. Format is decimal. This attribute is + used to resolve interfaces chaining, linking and stacking. + Physical interfaces have the same 'ifindex' and 'iflink' values. + +What: /sys/class/net/<iface>/link_mode +Date: March 2006 +KernelVersion: 2.6.17 +Contact: netdev@vger.kernel.org +Description: + Indicates the interface link mode, as a decimal number. This + attribute should be used in conjunction with 'dormant' attribute + to determine the interface usability. Possible values: + + == ================= + 0 default link mode + 1 dormant link mode + == ================= + +What: /sys/class/net/<iface>/mtu +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the interface currently configured MTU value, in + bytes, and in decimal format. Specific values depends on the + lower-level interface protocol used. Ethernet devices will show + a 'mtu' attribute value of 1500 unless changed. + +What: /sys/class/net/<iface>/netdev_group +Date: January 2011 +KernelVersion: 2.6.39 +Contact: netdev@vger.kernel.org +Description: + Indicates the interface network device group, as a decimal + integer. Default value is 0 which corresponds to the initial + network devices group. The group can be changed to affect + routing decisions (see: net/ipv4/fib_rules and + net/ipv6/fib6_rules.c). + +What: /sys/class/net/<iface>/operstate +Date: March 2006 +KernelVersion: 2.6.17 +Contact: netdev@vger.kernel.org +Description: + Indicates the interface RFC2863 operational state as a string. + + Possible values are: + + "unknown", "notpresent", "down", "lowerlayerdown", "testing", + "dormant", "up". + +What: /sys/class/net/<iface>/phys_port_id +Date: July 2013 +KernelVersion: 3.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the interface unique physical port identifier within + the NIC, as a string. + +What: /sys/class/net/<iface>/phys_port_name +Date: March 2015 +KernelVersion: 4.0 +Contact: netdev@vger.kernel.org +Description: + Indicates the interface physical port name within the NIC, + as a string. + +What: /sys/class/net/<iface>/speed +Date: October 2009 +KernelVersion: 2.6.33 +Contact: netdev@vger.kernel.org +Description: + Indicates the interface latest or current speed value. Value is + an integer representing the link speed in Mbits/sec. + + Note: this attribute is only valid for interfaces that implement + the ethtool get_link_ksettings method (mostly Ethernet). + +What: /sys/class/net/<iface>/tx_queue_len +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the interface transmit queue len in number of packets, + as an integer value. Value depend on the type of interface, + Ethernet network adapters have a default value of 1000 unless + configured otherwise + +What: /sys/class/net/<iface>/type +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the interface protocol type as a decimal value. See + include/uapi/linux/if_arp.h for all possible values. + +What: /sys/class/net/<iface>/phys_switch_id +Date: November 2014 +KernelVersion: 3.19 +Contact: netdev@vger.kernel.org +Description: + Indicates the unique physical switch identifier of a switch this + port belongs to, as a string. + +What: /sys/class/net/<iface>/phydev +Date: May 2017 +KernelVersion: 4.13 +Contact: netdev@vger.kernel.org +Description: + Symbolic link to the PHY device this network device is attached + to. + +What: /sys/class/net/<iface>/carrier_changes +Date: Mar 2014 +KernelVersion: 3.15 +Contact: netdev@vger.kernel.org +Description: + 32-bit unsigned integer counting the number of times the link has + seen a change from UP to DOWN and vice versa + +What: /sys/class/net/<iface>/carrier_up_count +Date: Jan 2018 +KernelVersion: 4.16 +Contact: netdev@vger.kernel.org +Description: + 32-bit unsigned integer counting the number of times the link has + been up + +What: /sys/class/net/<iface>/carrier_down_count +Date: Jan 2018 +KernelVersion: 4.16 +Contact: netdev@vger.kernel.org +Description: + 32-bit unsigned integer counting the number of times the link has + been down + +What: /sys/class/net/<iface>/threaded +Date: Jan 2021 +KernelVersion: 5.12 +Contact: netdev@vger.kernel.org +Description: + Boolean value to control the threaded mode per device. User could + set this value to enable/disable threaded mode for all napi + belonging to this device, without the need to do device up/down. + + Possible values: + == ================================== + 0 threaded mode disabled for this dev + 1 threaded mode enabled for this dev + == ================================== diff --git a/Documentation/ABI/testing/sysfs-class-net-cdc_ncm b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm new file mode 100644 index 000000000..06416d0e1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm @@ -0,0 +1,168 @@ +What: /sys/class/net/<iface>/cdc_ncm/min_tx_pkt +Date: May 2014 +KernelVersion: 3.16 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + The driver will pad NCM Transfer Blocks (NTBs) longer + than this to tx_max, allowing the device to receive + tx_max sized frames with no terminating short + packet. NTBs shorter than this limit are transmitted + as-is, without any padding, and are terminated with a + short USB packet. + + Padding to tx_max allows the driver to transmit NTBs + back-to-back without any interleaving short USB + packets. This reduces the number of short packet + interrupts in the device, and represents a tradeoff + between USB bus bandwidth and device DMA optimization. + + Set to 0 to pad all frames. Set greater than tx_max to + disable all padding. + +What: /sys/class/net/<iface>/cdc_ncm/ndp_to_end +Date: Dec 2015 +KernelVersion: 4.5 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + Boolean attribute showing the status of the "NDP to + end" quirk. Defaults to 'N', except for devices + already known to need it enabled. + + The "NDP to end" quirk makes the driver place the NDP + (the packet index table) after the payload. The NCM + specification does not mandate this, but some devices + are known to be more restrictive. Write 'Y' to this + attribute for temporary testing of a suspect device + failing to work with the default driver settings. + + A device entry should be added to the driver if this + quirk is found to be required. + +What: /sys/class/net/<iface>/cdc_ncm/rx_max +Date: May 2014 +KernelVersion: 3.16 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + The maximum NTB size for RX. Cannot exceed the + maximum value supported by the device. Must allow at + least one max sized datagram plus headers. + + The actual limits are device dependent. See + dwNtbInMaxSize. + + Note: Some devices will silently ignore changes to + this value, resulting in oversized NTBs and + corresponding framing errors. + +What: /sys/class/net/<iface>/cdc_ncm/tx_max +Date: May 2014 +KernelVersion: 3.16 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + The maximum NTB size for TX. Cannot exceed the + maximum value supported by the device. Must allow at + least one max sized datagram plus headers. + + The actual limits are device dependent. See + dwNtbOutMaxSize. + +What: /sys/class/net/<iface>/cdc_ncm/tx_timer_usecs +Date: May 2014 +KernelVersion: 3.16 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + Datagram aggregation timeout in µs. The driver will + wait up to 3 times this timeout for more datagrams to + aggregate before transmitting an NTB frame. + + Valid range: 5 to 4000000 + + Set to 0 to disable aggregation. + +The following read-only attributes all represent fields of the +structure defined in section 6.2.1 "GetNtbParameters" of "Universal +Serial Bus Communications Class Subclass Specifications for Network +Control Model Devices" (CDC NCM), Revision 1.0 (Errata 1), November +24, 2010 from USB Implementers Forum, Inc. The descriptions are +quoted from table 6-3 of CDC NCM: "NTB Parameter Structure". + +What: /sys/class/net/<iface>/cdc_ncm/bmNtbFormatsSupported +Date: May 2014 +KernelVersion: 3.16 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + - Bit 0: 16-bit NTB supported (set to 1) + - Bit 1: 32-bit NTB supported + - Bits 2 – 15: reserved (reset to zero; must be ignored by host) + +What: /sys/class/net/<iface>/cdc_ncm/dwNtbInMaxSize +Date: May 2014 +KernelVersion: 3.16 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + IN NTB Maximum Size in bytes + +What: /sys/class/net/<iface>/cdc_ncm/wNdpInDivisor +Date: May 2014 +KernelVersion: 3.16 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + Divisor used for IN NTB Datagram payload alignment + +What: /sys/class/net/<iface>/cdc_ncm/wNdpInPayloadRemainder +Date: May 2014 +KernelVersion: 3.16 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + Remainder used to align input datagram payload within + the NTB: (Payload Offset) mod (wNdpInDivisor) = + wNdpInPayloadRemainder + +What: /sys/class/net/<iface>/cdc_ncm/wNdpInAlignment +Date: May 2014 +KernelVersion: 3.16 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + NDP alignment modulus for NTBs on the IN pipe. Shall + be a power of 2, and shall be at least 4. + +What: /sys/class/net/<iface>/cdc_ncm/dwNtbOutMaxSize +Date: May 2014 +KernelVersion: 3.16 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + OUT NTB Maximum Size + +What: /sys/class/net/<iface>/cdc_ncm/wNdpOutDivisor +Date: May 2014 +KernelVersion: 3.16 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + OUT NTB Datagram alignment modulus + +What: /sys/class/net/<iface>/cdc_ncm/wNdpOutPayloadRemainder +Date: May 2014 +KernelVersion: 3.16 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + Remainder used to align output datagram payload + offsets within the NTB: Padding, shall be transmitted + as zero by function, and ignored by host. (Payload + Offset) mod (wNdpOutDivisor) = wNdpOutPayloadRemainder + +What: /sys/class/net/<iface>/cdc_ncm/wNdpOutAlignment +Date: May 2014 +KernelVersion: 3.16 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + NDP alignment modulus for use in NTBs on the OUT + pipe. Shall be a power of 2, and shall be at least 4. + +What: /sys/class/net/<iface>/cdc_ncm/wNtbOutMaxDatagrams +Date: May 2014 +KernelVersion: 3.16 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + Maximum number of datagrams that the host may pack + into a single OUT NTB. Zero means that the device + imposes no limit. diff --git a/Documentation/ABI/testing/sysfs-class-net-dsa b/Documentation/ABI/testing/sysfs-class-net-dsa new file mode 100644 index 000000000..e2da26b44 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-net-dsa @@ -0,0 +1,14 @@ +What: /sys/class/net/<iface>/dsa/tagging +Date: August 2018 +KernelVersion: 4.20 +Contact: netdev@vger.kernel.org +Description: + On read, this file returns a string indicating the type of + tagging protocol used by the DSA network devices that are + attached to this master interface. + On write, this file changes the tagging protocol of the + attached DSA switches, if this operation is supported by the + driver. Changing the tagging protocol must be done with the DSA + interfaces and the master interface all administratively down. + See the "name" field of each registered struct dsa_device_ops + for a list of valid values. diff --git a/Documentation/ABI/testing/sysfs-class-net-grcan b/Documentation/ABI/testing/sysfs-class-net-grcan new file mode 100644 index 000000000..f418c92ca --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-net-grcan @@ -0,0 +1,35 @@ + +What: /sys/class/net/<iface>/grcan/enable0 +Date: October 2012 +KernelVersion: 3.8 +Contact: Andreas Larsson <andreas@gaisler.com> +Description: + Hardware configuration of physical interface 0. This file reads + and writes the "Enable 0" bit of the configuration register. + Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP + core library documentation for details. The default value is 0 + or set by the module parameter grcan.enable0 and can be read at + /sys/module/grcan/parameters/enable0. + +What: /sys/class/net/<iface>/grcan/enable1 +Date: October 2012 +KernelVersion: 3.8 +Contact: Andreas Larsson <andreas@gaisler.com> +Description: + Hardware configuration of physical interface 1. This file reads + and writes the "Enable 1" bit of the configuration register. + Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP + core library documentation for details. The default value is 0 + or set by the module parameter grcan.enable1 and can be read at + /sys/module/grcan/parameters/enable1. + +What: /sys/class/net/<iface>/grcan/select +Date: October 2012 +KernelVersion: 3.8 +Contact: Andreas Larsson <andreas@gaisler.com> +Description: + Configuration of which physical interface to be used. Possible + values: 0 or 1. See the GRCAN chapter of the GRLIB IP core + library documentation for details. The default value is 0 or is + set by the module parameter grcan.select and can be read at + /sys/module/grcan/parameters/select. diff --git a/Documentation/ABI/testing/sysfs-class-net-janz-ican3 b/Documentation/ABI/testing/sysfs-class-net-janz-ican3 new file mode 100644 index 000000000..fdbc03a2b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-net-janz-ican3 @@ -0,0 +1,19 @@ +What: /sys/class/net/<iface>/termination +Date: May 2010 +KernelVersion: 2.6.35 +Contact: Ira W. Snyder <ira.snyder@gmail.com> +Description: + Value representing the can bus termination + + Default: 1 (termination active) + Reading: get actual termination state + Writing: set actual termination state (0=no termination, 1=termination active) + +What: /sys/class/net/<iface>/fwinfo +Date: May 2015 +KernelVersion: 3.19 +Contact: Andreas Gröger <andreas24groeger@gmail.com> +Description: + Firmware stamp of ican3 module + Read-only: 32 byte string identification of the ICAN3 module + (known values: "JANZ-ICAN3 ICANOS 1.xx", "JANZ-ICAN3 CAL/CANopen 1.xx") diff --git a/Documentation/ABI/testing/sysfs-class-net-phydev b/Documentation/ABI/testing/sysfs-class-net-phydev new file mode 100644 index 000000000..ac722dd5e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-net-phydev @@ -0,0 +1,65 @@ +What: /sys/class/mdio_bus/<bus>/<device>/attached_dev +Date: May 2017 +KernelVersion: 4.13 +Contact: netdev@vger.kernel.org +Description: + Symbolic link to the network device this PHY device is + attached to. + +What: /sys/class/mdio_bus/<bus>/<device>/phy_has_fixups +Date: February 2014 +KernelVersion: 3.15 +Contact: netdev@vger.kernel.org +Description: + This attribute contains the boolean value whether a given PHY + device has had any "fixup" workaround running on it, encoded as + a boolean. This information is provided to help troubleshooting + PHY configurations. + +What: /sys/class/mdio_bus/<bus>/<device>/phy_id +Date: November 2012 +KernelVersion: 3.8 +Contact: netdev@vger.kernel.org +Description: + This attribute contains the 32-bit PHY Identifier as reported + by the device during bus enumeration, encoded in hexadecimal. + This ID is used to match the device with the appropriate + driver. + +What: /sys/class/mdio_bus/<bus>/<device>/phy_interface +Date: February 2014 +KernelVersion: 3.15 +Contact: netdev@vger.kernel.org +Description: + This attribute contains the PHY interface as configured by the + Ethernet driver during bus enumeration, encoded in string. + This interface mode is used to configure the Ethernet MAC with the + appropriate mode for its data lines to the PHY hardware. + + Possible values are: + + <empty> (not available), mii, gmii, sgmii, tbi, rev-mii, + rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii + xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui, + xaui, 10gbase-kr, unknown + +What: /sys/class/mdio_bus/<bus>/<device>/phy_standalone +Date: May 2019 +KernelVersion: 5.3 +Contact: netdev@vger.kernel.org +Description: + Boolean value indicating whether the PHY device is used in + standalone mode, without a net_device associated, by PHYLINK. + Attribute created only when this is the case. + +What: /sys/class/mdio_bus/<bus>/<device>/phy_dev_flags +Date: March 2021 +KernelVersion: 5.13 +Contact: netdev@vger.kernel.org +Description: + 32-bit hexadecimal number representing a bit mask of the + configuration bits passed from the consumer of the PHY + (Ethernet MAC, switch, etc.) to the PHY driver. The flags are + only used internally by the kernel and their placement are + not meant to be stable across kernel versions. This is intended + for facilitating the debugging of PHY drivers. diff --git a/Documentation/ABI/testing/sysfs-class-net-qmi b/Documentation/ABI/testing/sysfs-class-net-qmi new file mode 100644 index 000000000..47e6b9732 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-net-qmi @@ -0,0 +1,76 @@ +What: /sys/class/net/<iface>/qmi/raw_ip +Date: Dec 2015 +KernelVersion: 4.4 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + Boolean. Default: 'N' + + Set this to 'Y' to change the network device link + framing from '802.3' to 'raw-ip'. + + The netdev will change to reflect the link framing + mode. The netdev is an ordinary ethernet device in + '802.3' mode, and the driver expects to exchange + frames with an ethernet header over the USB link. The + netdev is a headerless p-t-p device in 'raw-ip' mode, + and the driver expects to echange IPv4 or IPv6 packets + without any L2 header over the USB link. + + Userspace is in full control of firmware configuration + through the delegation of the QMI protocol. Userspace + is responsible for coordination of driver and firmware + link framing mode, changing this setting to 'Y' if the + firmware is configured for 'raw-ip' mode. + +What: /sys/class/net/<iface>/qmi/add_mux +Date: March 2017 +KernelVersion: 4.11 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + Unsigned integer. + + Write a number ranging from 1 to 254 to add a qmap mux + based network device, supported by recent Qualcomm based + modems. + + The network device will be called qmimux. + + Userspace is in charge of managing the qmux network device + activation and data stream setup on the modem side by + using the proper QMI protocol requests. + +What: /sys/class/net/<iface>/qmi/del_mux +Date: March 2017 +KernelVersion: 4.11 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + Unsigned integer. + + Write a number ranging from 1 to 254 to delete a previously + created qmap mux based network device. + +What: /sys/class/net/<qmimux iface>/qmap/mux_id +Date: January 2021 +KernelVersion: 5.12 +Contact: Daniele Palmas <dnlplm@gmail.com> +Description: + Unsigned integer + + Indicates the mux id associated to the qmimux network interface + during its creation. + +What: /sys/class/net/<iface>/qmi/pass_through +Date: January 2021 +KernelVersion: 5.12 +Contact: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> +Description: + Boolean. Default: 'N' + + Set this to 'Y' to enable 'pass-through' mode, allowing packets + in MAP format to be passed on to the stack. + + Normally the rmnet driver (CONFIG_RMNET) is then used to process + and demultiplex these packets. + + 'Pass-through' mode can be enabled when the device is in + 'raw-ip' mode only. diff --git a/Documentation/ABI/testing/sysfs-class-net-queues b/Documentation/ABI/testing/sysfs-class-net-queues new file mode 100644 index 000000000..978b76358 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-net-queues @@ -0,0 +1,98 @@ +What: /sys/class/<iface>/queues/rx-<queue>/rps_cpus +Date: March 2010 +KernelVersion: 2.6.35 +Contact: netdev@vger.kernel.org +Description: + Mask of the CPU(s) currently enabled to participate into the + Receive Packet Steering packet processing flow for this + network device queue. Possible values depend on the number + of available CPU(s) in the system. + +What: /sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt +Date: April 2010 +KernelVersion: 2.6.35 +Contact: netdev@vger.kernel.org +Description: + Number of Receive Packet Steering flows being currently + processed by this particular network device receive queue. + +What: /sys/class/<iface>/queues/tx-<queue>/tx_timeout +Date: November 2011 +KernelVersion: 3.3 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of transmit timeout events seen by this + network interface transmit queue. + +What: /sys/class/<iface>/queues/tx-<queue>/tx_maxrate +Date: March 2015 +KernelVersion: 4.1 +Contact: netdev@vger.kernel.org +Description: + A Mbps max-rate set for the queue, a value of zero means disabled, + default is disabled. + +What: /sys/class/<iface>/queues/tx-<queue>/xps_cpus +Date: November 2010 +KernelVersion: 2.6.38 +Contact: netdev@vger.kernel.org +Description: + Mask of the CPU(s) currently enabled to participate into the + Transmit Packet Steering packet processing flow for this + network device transmit queue. Possible vaules depend on the + number of available CPU(s) in the system. + +What: /sys/class/<iface>/queues/tx-<queue>/xps_rxqs +Date: June 2018 +KernelVersion: 4.18.0 +Contact: netdev@vger.kernel.org +Description: + Mask of the receive queue(s) currently enabled to participate + into the Transmit Packet Steering packet processing flow for this + network device transmit queue. Possible values depend on the + number of available receive queue(s) in the network device. + Default is disabled. + +What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time +Date: November 2011 +KernelVersion: 3.3 +Contact: netdev@vger.kernel.org +Description: + Indicates the hold time in milliseconds to measure the slack + of this particular network device transmit queue. + Default value is 1000. + +What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight +Date: November 2011 +KernelVersion: 3.3 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of bytes (objects) in flight on this + network device transmit queue. + +What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit +Date: November 2011 +KernelVersion: 3.3 +Contact: netdev@vger.kernel.org +Description: + Indicates the current limit of bytes allowed to be queued + on this network device transmit queue. This value is clamped + to be within the bounds defined by limit_max and limit_min. + +What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max +Date: November 2011 +KernelVersion: 3.3 +Contact: netdev@vger.kernel.org +Description: + Indicates the absolute maximum limit of bytes allowed to be + queued on this network device transmit queue. See + include/linux/dynamic_queue_limits.h for the default value. + +What: /sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min +Date: November 2011 +KernelVersion: 3.3 +Contact: netdev@vger.kernel.org +Description: + Indicates the absolute minimum limit of bytes allowed to be + queued on this network device transmit queue. Default value is + 0. diff --git a/Documentation/ABI/testing/sysfs-class-net-statistics b/Documentation/ABI/testing/sysfs-class-net-statistics new file mode 100644 index 000000000..55db27815 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-net-statistics @@ -0,0 +1,217 @@ +What: /sys/class/<iface>/statistics/collisions +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of collisions seen by this network device. + This value might not be relevant with all MAC layers. + +What: /sys/class/<iface>/statistics/multicast +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of multicast packets received by this + network device. + +What: /sys/class/<iface>/statistics/rx_bytes +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of bytes received by this network device. + See the network driver for the exact meaning of when this + value is incremented. + +What: /sys/class/<iface>/statistics/rx_compressed +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of compressed packets received by this + network device. This value might only be relevant for interfaces + that support packet compression (e.g: PPP). + +What: /sys/class/<iface>/statistics/rx_crc_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets received with a CRC (FCS) error + by this network device. Note that the specific meaning might + depend on the MAC layer used by the interface. + +What: /sys/class/<iface>/statistics/rx_dropped +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets received by the network device + but dropped, that are not forwarded to the upper layers for + packet processing. See the network driver for the exact + meaning of this value. + +What: /sys/class/<iface>/statistics/rx_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of receive errors on this network device. + See the network driver for the exact meaning of this value. + +What: /sys/class/<iface>/statistics/rx_fifo_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of receive FIFO errors seen by this + network device. See the network driver for the exact + meaning of this value. + +What: /sys/class/<iface>/statistics/rx_frame_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of received frames with error, such as + alignment errors. Note that the specific meaning depends on + on the MAC layer protocol used. See the network driver for + the exact meaning of this value. + +What: /sys/class/<iface>/statistics/rx_length_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of received error packet with a length + error, oversized or undersized. See the network driver for the + exact meaning of this value. + +What: /sys/class/<iface>/statistics/rx_missed_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of received packets that have been missed + due to lack of capacity in the receive side. See the network + driver for the exact meaning of this value. + +What: /sys/class/<iface>/statistics/rx_nohandler +Date: February 2016 +KernelVersion: 4.6 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of received packets that were dropped on + an inactive device by the network core. + +What: /sys/class/<iface>/statistics/rx_over_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of received packets that are oversized + compared to what the network device is configured to accept + (e.g: larger than MTU). See the network driver for the exact + meaning of this value. + +What: /sys/class/<iface>/statistics/rx_packets +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the total number of good packets received by this + network device. + +What: /sys/class/<iface>/statistics/tx_aborted_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets that have been aborted + during transmission by a network device (e.g: because of + a medium collision). See the network driver for the exact + meaning of this value. + +What: /sys/class/<iface>/statistics/tx_bytes +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of bytes transmitted by a network + device. See the network driver for the exact meaning of this + value, in particular whether this accounts for all successfully + transmitted packets or all packets that have been queued for + transmission. + +What: /sys/class/<iface>/statistics/tx_carrier_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets that could not be transmitted + because of carrier errors (e.g: physical link down). See the + network driver for the exact meaning of this value. + +What: /sys/class/<iface>/statistics/tx_compressed +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of transmitted compressed packets. Note + this might only be relevant for devices that support + compression (e.g: PPP). + +What: /sys/class/<iface>/statistics/tx_dropped +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets dropped during transmission. + See the driver for the exact reasons as to why the packets were + dropped. + +What: /sys/class/<iface>/statistics/tx_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets in error during transmission by + a network device. See the driver for the exact reasons as to + why the packets were dropped. + +What: /sys/class/<iface>/statistics/tx_fifo_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets having caused a transmit + FIFO error. See the driver for the exact reasons as to why the + packets were dropped. + +What: /sys/class/<iface>/statistics/tx_heartbeat_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets transmitted that have been + reported as heartbeat errors. See the driver for the exact + reasons as to why the packets were dropped. + +What: /sys/class/<iface>/statistics/tx_packets +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets transmitted by a network + device. See the driver for whether this reports the number of all + attempted or successful transmissions. + +What: /sys/class/<iface>/statistics/tx_window_errors +Date: April 2005 +KernelVersion: 2.6.12 +Contact: netdev@vger.kernel.org +Description: + Indicates the number of packets not successfully transmitted + due to a window collision. The specific meaning depends on the + MAC layer used. On Ethernet this is usually used to report + late collisions errors. diff --git a/Documentation/ABI/testing/sysfs-class-ocxl b/Documentation/ABI/testing/sysfs-class-ocxl new file mode 100644 index 000000000..847a7edc3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-ocxl @@ -0,0 +1,51 @@ +What: /sys/class/ocxl/<afu name>/afu_version +Date: January 2018 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Version of the AFU, in the format <major>:<minor> + Reflects what is read in the configuration space of the AFU + +What: /sys/class/ocxl/<afu name>/contexts +Date: January 2018 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Number of contexts for the AFU, in the format <n>/<max> + where: + + ==== =============================================== + n number of currently active contexts, for debug + max maximum number of contexts supported by the AFU + ==== =============================================== + +What: /sys/class/ocxl/<afu name>/pp_mmio_size +Date: January 2018 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Size of the per-process mmio area, as defined in the + configuration space of the AFU + +What: /sys/class/ocxl/<afu name>/global_mmio_size +Date: January 2018 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read only + Size of the global mmio area, as defined in the + configuration space of the AFU + +What: /sys/class/ocxl/<afu name>/global_mmio_area +Date: January 2018 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read/write + Give access the global mmio area for the AFU + +What: /sys/class/ocxl/<afu name>/reload_on_reset +Date: February 2020 +Contact: linuxppc-dev@lists.ozlabs.org +Description: read/write + Control whether the FPGA is reloaded on a link reset. Enabled + through a vendor-specific logic block on the FPGA. + + =========== =========================================== + 0 Do not reload FPGA image from flash + 1 Reload FPGA image from flash + unavailable The device does not support this capability + =========== =========================================== diff --git a/Documentation/ABI/testing/sysfs-class-pktcdvd b/Documentation/ABI/testing/sysfs-class-pktcdvd new file mode 100644 index 000000000..ba1ce6265 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-pktcdvd @@ -0,0 +1,97 @@ +sysfs interface +--------------- +The pktcdvd module (packet writing driver) creates the following files in the +sysfs: (<devid> is in the format major:minor) + +What: /sys/class/pktcdvd/add +What: /sys/class/pktcdvd/remove +What: /sys/class/pktcdvd/device_map +Date: Oct. 2006 +KernelVersion: 2.6.20 +Contact: Thomas Maier <balagi@justmail.de> +Description: + + ========== ============================================== + add (WO) Write a block device id (major:minor) to + create a new pktcdvd device and map it to the + block device. + + remove (WO) Write the pktcdvd device id (major:minor) + to remove the pktcdvd device. + + device_map (RO) Shows the device mapping in format: + pktcdvd[0-7] <pktdevid> <blkdevid> + ========== ============================================== + + +What: /sys/class/pktcdvd/pktcdvd[0-7]/dev +What: /sys/class/pktcdvd/pktcdvd[0-7]/uevent +Date: Oct. 2006 +KernelVersion: 2.6.20 +Contact: Thomas Maier <balagi@justmail.de> +Description: + dev: (RO) Device id + + uevent: (WO) To send a uevent + + +What: /sys/class/pktcdvd/pktcdvd[0-7]/stat/packets_started +What: /sys/class/pktcdvd/pktcdvd[0-7]/stat/packets_finished +What: /sys/class/pktcdvd/pktcdvd[0-7]/stat/kb_written +What: /sys/class/pktcdvd/pktcdvd[0-7]/stat/kb_read +What: /sys/class/pktcdvd/pktcdvd[0-7]/stat/kb_read_gather +What: /sys/class/pktcdvd/pktcdvd[0-7]/stat/reset +Date: Oct. 2006 +KernelVersion: 2.6.20 +Contact: Thomas Maier <balagi@justmail.de> +Description: + packets_started: (RO) Number of started packets. + + packets_finished: (RO) Number of finished packets. + + kb_written: (RO) kBytes written. + + kb_read: (RO) kBytes read. + + kb_read_gather: (RO) kBytes read to fill write packets. + + reset: (WO) Write any value to it to reset + pktcdvd device statistic values, like + bytes read/written. + + +What: /sys/class/pktcdvd/pktcdvd[0-7]/write_queue/size +What: /sys/class/pktcdvd/pktcdvd[0-7]/write_queue/congestion_off +What: /sys/class/pktcdvd/pktcdvd[0-7]/write_queue/congestion_on +Date: Oct. 2006 +KernelVersion: 2.6.20 +Contact: Thomas Maier <balagi@justmail.de> +Description: + ============== ================================================ + size (RO) Contains the size of the bio write queue. + + congestion_off (RW) If bio write queue size is below this mark, + accept new bio requests from the block layer. + + congestion_on (RW) If bio write queue size is higher as this + mark, do no longer accept bio write requests + from the block layer and wait till the pktcdvd + device has processed enough bio's so that bio + write queue size is below congestion off mark. + A value of <= 0 disables congestion control. + ============== ================================================ + + +Example: +-------- +To use the pktcdvd sysfs interface directly, you can do:: + + # create a new pktcdvd device mapped to /dev/hdc + echo "22:0" >/sys/class/pktcdvd/add + cat /sys/class/pktcdvd/device_map + # assuming device pktcdvd0 was created, look at stat's + cat /sys/class/pktcdvd/pktcdvd0/stat/kb_written + # print the device id of the mapped block device + fgrep pktcdvd0 /sys/class/pktcdvd/device_map + # remove device, using pktcdvd0 device id 253:0 + echo "253:0" >/sys/class/pktcdvd/remove diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power new file mode 100644 index 000000000..e434fc523 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-power @@ -0,0 +1,773 @@ +**General Properties** + +What: /sys/class/power_supply/<supply_name>/manufacturer +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports the name of the device manufacturer. + + Access: Read + Valid values: Represented as string + +What: /sys/class/power_supply/<supply_name>/model_name +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports the name of the device model. + + Access: Read + Valid values: Represented as string + +What: /sys/class/power_supply/<supply_name>/serial_number +Date: January 2008 +Contact: linux-pm@vger.kernel.org +Description: + Reports the serial number of the device. + + Access: Read + Valid values: Represented as string + +What: /sys/class/power_supply/<supply_name>/type +Date: May 2010 +Contact: linux-pm@vger.kernel.org +Description: + Describes the main type of the supply. + + Access: Read + Valid values: "Battery", "UPS", "Mains", "USB", "Wireless" + +**Battery and USB properties** + +What: /sys/class/power_supply/<supply_name>/current_avg +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports an average IBAT current reading for the battery, over + a fixed period. Normally devices will provide a fixed interval + in which they average readings to smooth out the reported + value. + + USB: + + Reports an average IBUS current reading over a fixed period. + Normally devices will provide a fixed interval in which they + average readings to smooth out the reported value. + + Access: Read + + Valid values: Represented in microamps. Negative values are + used for discharging batteries, positive values for charging + batteries and for USB IBUS current. + +What: /sys/class/power_supply/<supply_name>/current_max +Date: October 2010 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports the maximum IBAT current allowed into the battery. + + USB: + + Reports the maximum IBUS current the supply can support. + + Access: Read + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/current_now +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + + Battery: + + Reports an instant, single IBAT current reading for the + battery. This value is not averaged/smoothed. + + Access: Read + + USB: + + Reports the IBUS current supplied now. This value is generally + read-only reporting, unless the 'online' state of the supply + is set to be programmable, in which case this value can be set + within the reported min/max range. + + Access: Read, Write + + Valid values: Represented in microamps. Negative values are + used for discharging batteries, positive values for charging + batteries and for USB IBUS current. + +What: /sys/class/power_supply/<supply_name>/temp +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports the current TBAT battery temperature reading. + + USB: + + Reports the current supply temperature reading. This would + normally be the internal temperature of the device itself + (e.g TJUNC temperature of an IC) + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_alert_max +Date: July 2012 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Maximum TBAT temperature trip-wire value where the supply will + notify user-space of the event. + + USB: + + Maximum supply temperature trip-wire value where the supply + will notify user-space of the event. + + This is normally used for the charging scenario where + user-space needs to know if the temperature has crossed an + upper threshold so it can take appropriate action (e.g. warning + user that the temperature is critically high, and charging has + stopped). + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_alert_min +Date: July 2012 +Contact: linux-pm@vger.kernel.org +Description: + + Battery: + + Minimum TBAT temperature trip-wire value where the supply will + notify user-space of the event. + + USB: + + Minimum supply temperature trip-wire value where the supply + will notify user-space of the event. + + This is normally used for the charging scenario where user-space + needs to know if the temperature has crossed a lower threshold + so it can take appropriate action (e.g. warning user that + temperature level is high, and charging current has been + reduced accordingly to remedy the situation). + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_max +Date: July 2014 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports the maximum allowed TBAT battery temperature for + charging. + + USB: + + Reports the maximum allowed supply temperature for operation. + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/temp_min +Date: July 2014 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports the minimum allowed TBAT battery temperature for + charging. + + USB: + + Reports the minimum allowed supply temperature for operation. + + Access: Read + + Valid values: Represented in 1/10 Degrees Celsius + +What: /sys/class/power_supply/<supply_name>/voltage_max, +Date: January 2008 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports the maximum safe VBAT voltage permitted for the + battery, during charging. + + USB: + + Reports the maximum VBUS voltage the supply can support. + + Access: Read + + Valid values: Represented in microvolts + +What: /sys/class/power_supply/<supply_name>/voltage_min, +Date: January 2008 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports the minimum safe VBAT voltage permitted for the + battery, during discharging. + + USB: + + Reports the minimum VBUS voltage the supply can support. + + Access: Read + + Valid values: Represented in microvolts + +What: /sys/class/power_supply/<supply_name>/voltage_now, +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Battery: + + Reports an instant, single VBAT voltage reading for the + battery. This value is not averaged/smoothed. + + Access: Read + + USB: + + Reports the VBUS voltage supplied now. This value is generally + read-only reporting, unless the 'online' state of the supply + is set to be programmable, in which case this value can be set + within the reported min/max range. + + Access: Read, Write + + Valid values: Represented in microvolts + +**Battery Properties** + +What: /sys/class/power_supply/<supply_name>/capacity +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Fine grain representation of battery capacity. + + Access: Read + + Valid values: 0 - 100 (percent) + +What: /sys/class/power_supply/<supply_name>/capacity_alert_max +Date: July 2012 +Contact: linux-pm@vger.kernel.org +Description: + Maximum battery capacity trip-wire value where the supply will + notify user-space of the event. This is normally used for the + battery discharging scenario where user-space needs to know the + battery has dropped to an upper level so it can take + appropriate action (e.g. warning user that battery level is + low). + + Access: Read, Write + + Valid values: 0 - 100 (percent) + +What: /sys/class/power_supply/<supply_name>/capacity_alert_min +Date: July 2012 +Contact: linux-pm@vger.kernel.org +Description: + Minimum battery capacity trip-wire value where the supply will + notify user-space of the event. This is normally used for the + battery discharging scenario where user-space needs to know the + battery has dropped to a lower level so it can take + appropriate action (e.g. warning user that battery level is + critically low). + + Access: Read, Write + + Valid values: 0 - 100 (percent) + +What: /sys/class/power_supply/<supply_name>/capacity_error_margin +Date: April 2019 +Contact: linux-pm@vger.kernel.org +Description: + Battery capacity measurement becomes unreliable without + recalibration. This values provides the maximum error + margin expected to exist by the fuel gauge in percent. + Values close to 0% will be returned after (re-)calibration + has happened. Over time the error margin will increase. + 100% means, that the capacity related values are basically + completely useless. + + Access: Read + + Valid values: 0 - 100 (percent) + +What: /sys/class/power_supply/<supply_name>/capacity_level +Date: June 2009 +Contact: linux-pm@vger.kernel.org +Description: + Coarse representation of battery capacity. + + Access: Read + + Valid values: + "Unknown", "Critical", "Low", "Normal", "High", + "Full" + +What: /sys/class/power_supply/<supply_name>/charge_control_limit +Date: Oct 2012 +Contact: linux-pm@vger.kernel.org +Description: + Maximum allowable charging current. Used for charge rate + throttling for thermal cooling or improving battery health. + + Access: Read, Write + + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/charge_control_limit_max +Date: Oct 2012 +Contact: linux-pm@vger.kernel.org +Description: + Maximum legal value for the charge_control_limit property. + + Access: Read + + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/charge_control_start_threshold +Date: April 2019 +Contact: linux-pm@vger.kernel.org +Description: + Represents a battery percentage level, below which charging will + begin. + + Access: Read, Write + Valid values: 0 - 100 (percent) + +What: /sys/class/power_supply/<supply_name>/charge_control_end_threshold +Date: April 2019 +Contact: linux-pm@vger.kernel.org +Description: + Represents a battery percentage level, above which charging will + stop. Not all hardware is capable of setting this to an arbitrary + percentage. Drivers will round written values to the nearest + supported value. Reading back the value will show the actual + threshold set by the driver. + + Access: Read, Write + + Valid values: 0 - 100 (percent) + +What: /sys/class/power_supply/<supply_name>/charge_type +Date: July 2009 +Contact: linux-pm@vger.kernel.org +Description: + Represents the type of charging currently being applied to the + battery. "Trickle", "Fast", and "Standard" all mean different + charging speeds. "Adaptive" means that the charger uses some + algorithm to adjust the charge rate dynamically, without + any user configuration required. "Custom" means that the charger + uses the charge_control_* properties as configuration for some + different algorithm. "Long Life" means the charger reduces its + charging rate in order to prolong the battery health. "Bypass" + means the charger bypasses the charging path around the + integrated converter allowing for a "smart" wall adaptor to + perform the power conversion externally. + + Access: Read, Write + + Valid values: + "Unknown", "N/A", "Trickle", "Fast", "Standard", + "Adaptive", "Custom", "Long Life", "Bypass" + +What: /sys/class/power_supply/<supply_name>/charge_term_current +Date: July 2014 +Contact: linux-pm@vger.kernel.org +Description: + Reports the charging current value which is used to determine + when the battery is considered full and charging should end. + + Access: Read + + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/health +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports the health of the battery or battery side of charger + functionality. + + Access: Read + + Valid values: + "Unknown", "Good", "Overheat", "Dead", + "Over voltage", "Unspecified failure", "Cold", + "Watchdog timer expire", "Safety timer expire", + "Over current", "Calibration required", "Warm", + "Cool", "Hot", "No battery" + +What: /sys/class/power_supply/<supply_name>/precharge_current +Date: June 2017 +Contact: linux-pm@vger.kernel.org +Description: + Reports the charging current applied during pre-charging phase + for a battery charge cycle. + + Access: Read + + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/present +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports whether a battery is present or not in the system. + + Access: Read + + Valid values: + + == ======= + 0: Absent + 1: Present + == ======= + +What: /sys/class/power_supply/<supply_name>/status +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Represents the charging status of the battery. Normally this + is read-only reporting although for some supplies this can be + used to enable/disable charging to the battery. + + Access: Read, Write + + Valid values: + "Unknown", "Charging", "Discharging", + "Not charging", "Full" + +What: /sys/class/power_supply/<supply_name>/charge_behaviour +Date: November 2021 +Contact: linux-pm@vger.kernel.org +Description: + Represents the charging behaviour. + + Access: Read, Write + + Valid values: + ================ ==================================== + auto: Charge normally, respect thresholds + inhibit-charge: Do not charge while AC is attached + force-discharge: Force discharge while AC is attached + ================ ==================================== + +What: /sys/class/power_supply/<supply_name>/technology +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Describes the battery technology supported by the supply. + + Access: Read + + Valid values: + "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", + "NiCd", "LiMn" + + +What: /sys/class/power_supply/<supply_name>/voltage_avg, +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Reports an average VBAT voltage reading for the battery, over a + fixed period. Normally devices will provide a fixed interval in + which they average readings to smooth out the reported value. + + Access: Read + + Valid values: Represented in microvolts + +What: /sys/class/power_supply/<supply_name>/cycle_count +Date: January 2010 +Contact: linux-pm@vger.kernel.org +Description: + Reports the number of full charge + discharge cycles the + battery has undergone. + + Access: Read + + Valid values: + Integer > 0: representing full cycles + Integer = 0: cycle_count info is not available + +**USB Properties** + +What: /sys/class/power_supply/<supply_name>/input_current_limit +Date: July 2014 +Contact: linux-pm@vger.kernel.org +Description: + Details the incoming IBUS current limit currently set in the + supply. Normally this is configured based on the type of + connection made (e.g. A configured SDP should output a maximum + of 500mA so the input current limit is set to the same value). + Use preferably input_power_limit, and for problems that can be + solved using power limit use input_current_limit. + + Access: Read, Write + + Valid values: Represented in microamps + +What: /sys/class/power_supply/<supply_name>/input_voltage_limit +Date: May 2019 +Contact: linux-pm@vger.kernel.org +Description: + This entry configures the incoming VBUS voltage limit currently + set in the supply. Normally this is configured based on + system-level knowledge or user input (e.g. This is part of the + Pixel C's thermal management strategy to effectively limit the + input power to 5V when the screen is on to meet Google's skin + temperature targets). Note that this feature should not be + used for safety critical things. + Use preferably input_power_limit, and for problems that can be + solved using power limit use input_voltage_limit. + + Access: Read, Write + + Valid values: Represented in microvolts + +What: /sys/class/power_supply/<supply_name>/input_power_limit +Date: May 2019 +Contact: linux-pm@vger.kernel.org +Description: + This entry configures the incoming power limit currently set + in the supply. Normally this is configured based on + system-level knowledge or user input. Use preferably this + feature to limit the incoming power and use current/voltage + limit only for problems that can be solved using power limit. + + Access: Read, Write + + Valid values: Represented in microwatts + +What: /sys/class/power_supply/<supply_name>/online, +Date: May 2007 +Contact: linux-pm@vger.kernel.org +Description: + Indicates if VBUS is present for the supply. When the supply is + online, and the supply allows it, then it's possible to switch + between online states (e.g. Fixed -> Programmable for a PD_PPS + USB supply so voltage and current can be controlled). + + Access: Read, Write + + Valid values: + + == ================================================== + 0: Offline + 1: Online Fixed - Fixed Voltage Supply + 2: Online Programmable - Programmable Voltage Supply + == ================================================== + +What: /sys/class/power_supply/<supply_name>/usb_type +Date: March 2018 +Contact: linux-pm@vger.kernel.org +Description: + Reports what type of USB connection is currently active for + the supply, for example it can show if USB-PD capable source + is attached. + + Access: Read-Only + + Valid values: + "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD", + "PD_DRP", "PD_PPS", "BrickID" + +**Device Specific Properties** + +What: /sys/class/power/ds2760-battery.*/charge_now +Date: May 2010 +KernelVersion: 2.6.35 +Contact: Daniel Mack <daniel@caiaq.de> +Description: + This file is writeable and can be used to set the current + coloumb counter value inside the battery monitor chip. This + is needed for unavoidable corrections of aging batteries. + A userspace daemon can monitor the battery charging logic + and once the counter drops out of considerable bounds, take + appropriate action. + +What: /sys/class/power/ds2760-battery.*/charge_full +Date: May 2010 +KernelVersion: 2.6.35 +Contact: Daniel Mack <daniel@caiaq.de> +Description: + This file is writeable and can be used to set the assumed + battery 'full level'. As batteries age, this value has to be + amended over time. + +What: /sys/class/power_supply/max14577-charger/device/fast_charge_timer +Date: October 2014 +KernelVersion: 3.18.0 +Contact: Krzysztof Kozlowski <krzk@kernel.org> +Description: + This entry shows and sets the maximum time the max14577 + charger operates in fast-charge mode. When the timer expires + the device will terminate fast-charge mode (charging current + will drop to 0 A) and will trigger interrupt. + + Valid values: + + - 5, 6 or 7 (hours), + - 0: disabled. + +What: /sys/class/power_supply/max77693-charger/device/fast_charge_timer +Date: January 2015 +KernelVersion: 3.19.0 +Contact: Krzysztof Kozlowski <krzk@kernel.org> +Description: + This entry shows and sets the maximum time the max77693 + charger operates in fast-charge mode. When the timer expires + the device will terminate fast-charge mode (charging current + will drop to 0 A) and will trigger interrupt. + + Valid values: + + - 4 - 16 (hours), step by 2 (rounded down) + - 0: disabled. + +What: /sys/class/power_supply/max77693-charger/device/top_off_threshold_current +Date: January 2015 +KernelVersion: 3.19.0 +Contact: Krzysztof Kozlowski <krzk@kernel.org> +Description: + This entry shows and sets the charging current threshold for + entering top-off charging mode. When charging current in fast + charge mode drops below this value, the charger will trigger + interrupt and start top-off charging mode. + + Valid values: + + - 100000 - 200000 (microamps), step by 25000 (rounded down) + - 200000 - 350000 (microamps), step by 50000 (rounded down) + - 0: disabled. + +What: /sys/class/power_supply/max77693-charger/device/top_off_timer +Date: January 2015 +KernelVersion: 3.19.0 +Contact: Krzysztof Kozlowski <krzk@kernel.org> +Description: + This entry shows and sets the maximum time the max77693 + charger operates in top-off charge mode. When the timer expires + the device will terminate top-off charge mode (charging current + will drop to 0 A) and will trigger interrupt. + + Valid values: + + - 0 - 70 (minutes), step by 10 (rounded down) + +What: /sys/class/power_supply/bq24257-charger/ovp_voltage +Date: October 2015 +KernelVersion: 4.4.0 +Contact: Andreas Dannenberg <dannenberg@ti.com> +Description: + This entry configures the overvoltage protection feature of bq24257- + type charger devices. This feature protects the device and other + components against damage from overvoltage on the input supply. See + device datasheet for details. + + Valid values: + + - 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000, + 10500000 (all uV) + +What: /sys/class/power_supply/bq24257-charger/in_dpm_voltage +Date: October 2015 +KernelVersion: 4.4.0 +Contact: Andreas Dannenberg <dannenberg@ti.com> +Description: + This entry configures the input dynamic power path management voltage of + bq24257-type charger devices. Once the supply drops to the configured + voltage, the input current limit is reduced down to prevent the further + drop of the supply. When the IC enters this mode, the charge current is + lower than the set value. See device datasheet for details. + + Valid values: + + - 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000, + 4760000 (all uV) + +What: /sys/class/power_supply/bq24257-charger/high_impedance_enable +Date: October 2015 +KernelVersion: 4.4.0 +Contact: Andreas Dannenberg <dannenberg@ti.com> +Description: + This entry allows enabling the high-impedance mode of bq24257-type + charger devices. If enabled, it places the charger IC into low power + standby mode with the switch mode controller disabled. When disabled, + the charger operates normally. See device datasheet for details. + + Valid values: + + - 1: enabled + - 0: disabled + +What: /sys/class/power_supply/bq24257-charger/sysoff_enable +Date: October 2015 +KernelVersion: 4.4.0 +Contact: Andreas Dannenberg <dannenberg@ti.com> +Description: + This entry allows enabling the sysoff mode of bq24257-type charger + devices. If enabled and the input is removed, the internal battery FET + is turned off in order to reduce the leakage from the BAT pin to less + than 1uA. Note that on some devices/systems this disconnects the battery + from the system. See device datasheet for details. + + Valid values: + + - 1: enabled + - 0: disabled + +What: /sys/class/power_supply/<supply_name>/manufacture_year +Date: January 2020 +Contact: linux-pm@vger.kernel.org +Description: + Reports the year (following Gregorian calendar) when the device has been + manufactured. + + Access: Read + + Valid values: Reported as integer + +What: /sys/class/power_supply/<supply_name>/manufacture_month +Date: January 2020 +Contact: linux-pm@vger.kernel.org +Description: + Reports the month when the device has been manufactured. + + Access: Read + + Valid values: 1-12 + +What: /sys/class/power_supply/<supply_name>/manufacture_day +Date: January 2020 +Contact: linux-pm@vger.kernel.org +Description: + Reports the day of month when the device has been manufactured. + + Access: Read + Valid values: 1-31 diff --git a/Documentation/ABI/testing/sysfs-class-power-ltc4162l b/Documentation/ABI/testing/sysfs-class-power-ltc4162l new file mode 100644 index 000000000..ba30db930 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-power-ltc4162l @@ -0,0 +1,82 @@ +What: /sys/class/power_supply/ltc4162-l/charge_status +Date: Januari 2021 +KernelVersion: 5.11 +Description: + Detailed charge status information as reported by the chip. + + Access: Read + + Valid values: + ilim_reg_active + thermal_reg_active + vin_uvcl_active + iin_limit_active + constant_current + constant_voltage + charger_off + +What: /sys/class/power_supply/ltc4162-l/ibat +Date: Januari 2021 +KernelVersion: 5.11 +Description: + Battery input current as measured by the charger. Negative value + means that the battery is discharging. + + Access: Read + + Valid values: Signed value in microamps + +What: /sys/class/power_supply/ltc4162-l/vbat +Date: Januari 2021 +KernelVersion: 5.11 +Description: + Battery voltage as measured by the charger. + + Access: Read + + Valid values: In microvolts + +What: /sys/class/power_supply/ltc4162-l/vbat_avg +Date: Januari 2021 +KernelVersion: 5.11 +Description: + Battery voltage, averaged over time, as measured by the charger. + + Access: Read + + Valid values: In microvolts + +What: /sys/class/power_supply/ltc4162-l/force_telemetry +Date: Januari 2021 +KernelVersion: 5.11 +Description: + To save battery current, the measurement system is disabled if + the battery is the only source of power. This affects all + voltage, current and temperature measurements. + Write a "1" to this to keep performing telemetry once every few + seconds, even when running on battery (as reported by the online + property, which is "1" when external power is available and "0" + when the system runs on battery). + + Access: Read, Write + + Valid values: 0 (disabled) or 1 (enabled) + +What: /sys/class/power_supply/ltc4162-l/arm_ship_mode +Date: Januari 2021 +KernelVersion: 5.11 +Description: + The charger will normally drain the battery while inactive, + typically drawing about 54 microamps. Write a "1" to this + property to arm a special "ship" mode that extends shelf life + by reducing the leakage to about 2.8 microamps. The chip will + remain in this mode (and no longer respond to I2C commands) + until some external power-supply is attached raising the input + voltage above 1V. It will then automatically revert to "0". + Writing a "0" to the property cancels the "ship" mode request. + The ship mode, when armed, activates once the input voltage + drops below 1V. + + Access: Read, Write + + Valid values: 0 (disable) or 1 (enable) diff --git a/Documentation/ABI/testing/sysfs-class-power-mp2629 b/Documentation/ABI/testing/sysfs-class-power-mp2629 new file mode 100644 index 000000000..914d67caa --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-power-mp2629 @@ -0,0 +1,9 @@ +What: /sys/class/power_supply/mp2629_battery/batt_impedance_compen +Date: April 2020 +KernelVersion: 5.7 +Description: + Represents a battery impedance compensation to accelerate charging. + + Access: Read, Write + + Valid values: Represented in milli-ohms. Valid range is [0, 140]. diff --git a/Documentation/ABI/testing/sysfs-class-power-surface b/Documentation/ABI/testing/sysfs-class-power-surface new file mode 100644 index 000000000..79cde4dcf --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-power-surface @@ -0,0 +1,15 @@ +What: /sys/class/power_supply/<supply_name>/alarm +Date: April 2021 +KernelVersion: 5.13 +Contact: Maximilian Luz <luzmaximilian@gmail.com> +Description: + Battery trip point. When the remaining battery capacity crosses this + value in either direction, the system will be notified and if + necessary woken. + + Set to zero to clear/disable. + + Access: Read, Write + + Valid values: In micro-Wh or micro-Ah, depending on the power unit + of the battery diff --git a/Documentation/ABI/testing/sysfs-class-power-twl4030 b/Documentation/ABI/testing/sysfs-class-power-twl4030 new file mode 100644 index 000000000..b52f7023f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-power-twl4030 @@ -0,0 +1,33 @@ +What: /sys/class/power_supply/twl4030_usb/mode +Description: + Changing mode for USB port. + Writing to this can disable charging. + + Possible values are: + + ============= =========================================== + "auto" draw power as appropriate for detected + power source and battery status. + "off" do not draw any power. + "continuous" activate mode described as "linear" in + TWL data sheets. This uses whatever + current is available and doesn't switch off + when voltage drops. + + This is useful for unstable power sources + such as bicycle dynamo, but care should + be taken that battery is not over-charged. + ============= =========================================== + +What: /sys/class/power_supply/twl4030_ac/mode +Description: + Changing mode for 'ac' port. + Writing to this can disable charging. + + Possible values are: + + ====== =========================================== + "auto" draw power as appropriate for detected + power source and battery status. + "off" do not draw any power. + ====== =========================================== diff --git a/Documentation/ABI/testing/sysfs-class-power-wilco b/Documentation/ABI/testing/sysfs-class-power-wilco new file mode 100644 index 000000000..82af180fc --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-power-wilco @@ -0,0 +1,40 @@ +What: /sys/class/power_supply/wilco-charger/charge_type +Date: April 2019 +KernelVersion: 5.2 +Description: + What charging algorithm to use: + + Standard: + Fully charges battery at a standard rate. + Adaptive: + Battery settings adaptively optimized based on + typical battery usage pattern. + Fast: + Battery charges over a shorter period. + Trickle: + Extends battery lifespan, intended for users who + primarily use their Chromebook while connected to AC. + Custom: + A low and high threshold percentage is specified. + Charging begins when level drops below + charge_control_start_threshold, and ceases when + level is above charge_control_end_threshold. + Long Life: + Customized charge rate for last longer battery life. + On Wilco device this mode is pre-configured in the factory + through EC's private PID. Swiching to a different mode will + be denied by Wilco EC when Long Life mode is enabled. + +What: /sys/class/power_supply/wilco-charger/charge_control_start_threshold +Date: April 2019 +KernelVersion: 5.2 +Description: + Used when charge_type="Custom", as described above. Measured in + percentages. The valid range is [50, 95]. + +What: /sys/class/power_supply/wilco-charger/charge_control_end_threshold +Date: April 2019 +KernelVersion: 5.2 +Description: + Used when charge_type="Custom", as described above. Measured in + percentages. The valid range is [55, 100]. diff --git a/Documentation/ABI/testing/sysfs-class-powercap b/Documentation/ABI/testing/sysfs-class-powercap new file mode 100644 index 000000000..ca491ec4e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-powercap @@ -0,0 +1,152 @@ +What: /sys/class/powercap/ +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + The powercap/ class sub directory belongs to the power cap + subsystem. Refer to + Documentation/power/powercap/powercap.rst for details. + +What: /sys/class/powercap/<control type> +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + A <control type> is a unique name under /sys/class/powercap. + Here <control type> determines how the power is going to be + controlled. A <control type> can contain multiple power zones. + +What: /sys/class/powercap/<control type>/enabled +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + This allows to enable/disable power capping for a "control type". + This status affects every power zone using this "control_type. + +What: /sys/class/powercap/<control type>/<power zone> +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + A power zone is a single or a collection of devices, which can + be independently monitored and controlled. A power zone sysfs + entry is qualified with the name of the <control type>. + E.g. intel-rapl:0:1:1. + +What: /sys/class/powercap/<control type>/<power zone>/<child power zone> +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + Power zones may be organized in a hierarchy in which child + power zones provide monitoring and control for a subset of + devices under the parent. For example, if there is a parent + power zone for a whole CPU package, each CPU core in it can + be a child power zone. + +What: /sys/class/powercap/.../<power zone>/name +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + Specifies the name of this power zone. + +What: /sys/class/powercap/.../<power zone>/energy_uj +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + Current energy counter in micro-joules. Write "0" to reset. + If the counter can not be reset, then this attribute is + read-only. + +What: /sys/class/powercap/.../<power zone>/max_energy_range_uj +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + Range of the above energy counter in micro-joules. + + +What: /sys/class/powercap/.../<power zone>/power_uw +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + Current power in micro-watts. + +What: /sys/class/powercap/.../<power zone>/max_power_range_uw +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + Range of the above power value in micro-watts. + +What: /sys/class/powercap/.../<power zone>/constraint_X_name +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + Each power zone can define one or more constraints. Each + constraint can have an optional name. Here "X" can have values + from 0 to max integer. + +What: /sys/class/powercap/.../<power zone>/constraint_X_power_limit_uw +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + Power limit in micro-watts should be applicable for + the time window specified by "constraint_X_time_window_us". + Here "X" can have values from 0 to max integer. + +What: /sys/class/powercap/.../<power zone>/constraint_X_time_window_us +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + Time window in micro seconds. This is used along with + constraint_X_power_limit_uw to define a power constraint. + Here "X" can have values from 0 to max integer. + + +What: /sys/class/powercap/<control type>/.../constraint_X_max_power_uw +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + Maximum allowed power in micro watts for this constraint. + Here "X" can have values from 0 to max integer. + +What: /sys/class/powercap/<control type>/.../constraint_X_min_power_uw +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + Minimum allowed power in micro watts for this constraint. + Here "X" can have values from 0 to max integer. + +What: /sys/class/powercap/.../<power zone>/constraint_X_max_time_window_us +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + Maximum allowed time window in micro seconds for this + constraint. Here "X" can have values from 0 to max integer. + +What: /sys/class/powercap/.../<power zone>/constraint_X_min_time_window_us +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + Minimum allowed time window in micro seconds for this + constraint. Here "X" can have values from 0 to max integer. + +What: /sys/class/powercap/.../<power zone>/enabled +Date: September 2013 +KernelVersion: 3.13 +Contact: linux-pm@vger.kernel.org +Description: + This allows to enable/disable power capping at power zone level. + This applies to current power zone and its children. diff --git a/Documentation/ABI/testing/sysfs-class-pwm b/Documentation/ABI/testing/sysfs-class-pwm new file mode 100644 index 000000000..0638c94d0 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-pwm @@ -0,0 +1,88 @@ +What: /sys/class/pwm/ +Date: May 2013 +KernelVersion: 3.11 +Contact: H Hartley Sweeten <hsweeten@visionengravers.com> +Description: + The pwm/ class sub-directory belongs to the Generic PWM + Framework and provides a sysfs interface for using PWM + channels. + +What: /sys/class/pwm/pwmchip<N>/ +Date: May 2013 +KernelVersion: 3.11 +Contact: H Hartley Sweeten <hsweeten@visionengravers.com> +Description: + A /sys/class/pwm/pwmchipN directory is created for each + probed PWM controller/chip where N is the base of the + PWM chip. + +What: /sys/class/pwm/pwmchip<N>/npwm +Date: May 2013 +KernelVersion: 3.11 +Contact: H Hartley Sweeten <hsweeten@visionengravers.com> +Description: + The number of PWM channels supported by the PWM chip. + +What: /sys/class/pwm/pwmchip<N>/export +Date: May 2013 +KernelVersion: 3.11 +Contact: H Hartley Sweeten <hsweeten@visionengravers.com> +Description: + Exports a PWM channel from the PWM chip for sysfs control. + Value is between 0 and /sys/class/pwm/pwmchipN/npwm - 1. + +What: /sys/class/pwm/pwmchip<N>/unexport +Date: May 2013 +KernelVersion: 3.11 +Contact: H Hartley Sweeten <hsweeten@visionengravers.com> +Description: + Unexports a PWM channel. + +What: /sys/class/pwm/pwmchip<N>/pwmX +Date: May 2013 +KernelVersion: 3.11 +Contact: H Hartley Sweeten <hsweeten@visionengravers.com> +Description: + A /sys/class/pwm/pwmchipN/pwmX directory is created for + each exported PWM channel where X is the exported PWM + channel number. + +What: /sys/class/pwm/pwmchip<N>/pwmX/period +Date: May 2013 +KernelVersion: 3.11 +Contact: H Hartley Sweeten <hsweeten@visionengravers.com> +Description: + Sets the PWM signal period in nanoseconds. + +What: /sys/class/pwm/pwmchip<N>/pwmX/duty_cycle +Date: May 2013 +KernelVersion: 3.11 +Contact: H Hartley Sweeten <hsweeten@visionengravers.com> +Description: + Sets the PWM signal duty cycle in nanoseconds. + +What: /sys/class/pwm/pwmchip<N>/pwmX/polarity +Date: May 2013 +KernelVersion: 3.11 +Contact: H Hartley Sweeten <hsweeten@visionengravers.com> +Description: + Sets the output polarity of the PWM signal to "normal" or + "inversed". + +What: /sys/class/pwm/pwmchip<N>/pwmX/enable +Date: May 2013 +KernelVersion: 3.11 +Contact: H Hartley Sweeten <hsweeten@visionengravers.com> +Description: + Enable/disable the PWM signal. + 0 is disabled + 1 is enabled + +What: /sys/class/pwm/pwmchip<N>/pwmX/capture +Date: June 2016 +KernelVersion: 4.8 +Contact: Lee Jones <lee@kernel.org> +Description: + Capture information about a PWM signal. The output format is a + pair unsigned integers (period and duty cycle), separated by a + single space. diff --git a/Documentation/ABI/testing/sysfs-class-rapidio b/Documentation/ABI/testing/sysfs-class-rapidio new file mode 100644 index 000000000..81e091455 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rapidio @@ -0,0 +1,59 @@ +What: /sys/class/rapidio_port +Description: + On-chip RapidIO controllers and PCIe-to-RapidIO bridges + (referenced as "Master Port" or "mport") are presented in sysfs + as the special class of devices: "rapidio_port". + The /sys/class/rapidio_port subdirectory contains individual + subdirectories named as "rapidioN" where N = mport ID registered + with RapidIO subsystem. + + NOTE: An mport ID is not a RapidIO destination ID assigned to a + given local mport device. + +What: /sys/class/rapidio_port/rapidio<N>/sys_size +Date: Apr, 2014 +KernelVersion: v3.15 +Contact: Matt Porter <mporter@kernel.crashing.org>, + Alexandre Bounine <alexandre.bounine@idt.com> +Description: + (RO) reports RapidIO common transport system size: + + 0 = small (8-bit destination ID, max. 256 devices), + + 1 = large (16-bit destination ID, max. 65536 devices). + +What: /sys/class/rapidio_port/rapidio<N>/port_destid +Date: Apr, 2014 +KernelVersion: v3.15 +Contact: Matt Porter <mporter@kernel.crashing.org>, + Alexandre Bounine <alexandre.bounine@idt.com> +Description: + +(RO) reports RapidIO destination ID assigned to the given +RapidIO mport device. If value 0xFFFFFFFF is returned this means +that no valid destination ID have been assigned to the mport +(yet). Normally, before enumeration/discovery have been executed +only fabric enumerating mports have a valid destination ID +assigned to them using "hdid=..." rapidio module parameter. + +After enumeration or discovery was performed for a given mport device, +the corresponding subdirectory will also contain subdirectories for each +child RapidIO device connected to the mport. + +The example below shows mport device subdirectory with several child RapidIO +devices attached to it:: + + [rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l + total 0 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0001 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0004 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:e:0007 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0002 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0003 + drwxr-xr-x 3 root root 0 Feb 11 15:10 00:s:0005 + lrwxrwxrwx 1 root root 0 Feb 11 15:11 device -> ../../../0000:01:00.0 + -r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid + drwxr-xr-x 2 root root 0 Feb 11 15:11 power + lrwxrwxrwx 1 root root 0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port + -r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size + -rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent diff --git a/Documentation/ABI/testing/sysfs-class-rc b/Documentation/ABI/testing/sysfs-class-rc new file mode 100644 index 000000000..84e46d70d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rc @@ -0,0 +1,137 @@ +What: /sys/class/rc/ +Date: Apr 2010 +KernelVersion: 2.6.35 +Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> +Description: + The rc/ class sub-directory belongs to the Remote Controller + core and provides a sysfs interface for configuring infrared + remote controller receivers. + +What: /sys/class/rc/rc<N>/ +Date: Apr 2010 +KernelVersion: 2.6.35 +Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> +Description: + A /sys/class/rc/rcN directory is created for each remote + control receiver device where N is the number of the receiver. + +What: /sys/class/rc/rc<N>/protocols +Date: Jun 2010 +KernelVersion: 2.6.36 +Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> +Description: + Reading this file returns a list of available protocols, + something like:: + + "rc5 [rc6] nec jvc [sony]" + + Enabled protocols are shown in [] brackets. + + Writing "+proto" will add a protocol to the list of enabled + protocols. + + Writing "-proto" will remove a protocol from the list of enabled + protocols. + + Writing "proto" will enable only "proto". + + Writing "none" will disable all protocols. + + Write fails with EINVAL if an invalid protocol combination or + unknown protocol name is used. + +What: /sys/class/rc/rc<N>/filter +Date: Jan 2014 +KernelVersion: 3.15 +Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> +Description: + Sets the scancode filter expected value. + + Use in combination with /sys/class/rc/rcN/filter_mask to set the + expected value of the bits set in the filter mask. + If the hardware supports it then scancodes which do not match + the filter will be ignored. Otherwise the write will fail with + an error. + + This value may be reset to 0 if the current protocol is altered. + +What: /sys/class/rc/rc<N>/filter_mask +Date: Jan 2014 +KernelVersion: 3.15 +Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> +Description: + Sets the scancode filter mask of bits to compare. + Use in combination with /sys/class/rc/rcN/filter to set the bits + of the scancode which should be compared against the expected + value. A value of 0 disables the filter to allow all valid + scancodes to be processed. + + If the hardware supports it then scancodes which do not match + the filter will be ignored. Otherwise the write will fail with + an error. + + This value may be reset to 0 if the current protocol is altered. + +What: /sys/class/rc/rc<N>/wakeup_protocols +Date: Feb 2017 +KernelVersion: 4.11 +Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> +Description: + Reading this file returns a list of available protocols to use + for the wakeup filter, something like:: + + "rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce" + + Note that protocol variants are listed, so "nec", "sony", + "rc-5", "rc-6" have their different bit length encodings + listed if available. + + The enabled wakeup protocol is shown in [] brackets. + + Only one protocol can be selected at a time. + + Writing "proto" will use "proto" for wakeup events. + + Writing "none" will disable wakeup. + + Write fails with EINVAL if an invalid protocol combination or + unknown protocol name is used, or if wakeup is not supported by + the hardware. + +What: /sys/class/rc/rc<N>/wakeup_filter +Date: Jan 2014 +KernelVersion: 3.15 +Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> +Description: + Sets the scancode wakeup filter expected value. + + Use in combination with /sys/class/rc/rcN/wakeup_filter_mask to + set the expected value of the bits set in the wakeup filter mask + to trigger a system wake event. + + If the hardware supports it and wakeup_filter_mask is not 0 then + scancodes which match the filter will wake the system from e.g. + suspend to RAM or power off. + + Otherwise the write will fail with an error. + + This value may be reset to 0 if the wakeup protocol is altered. + +What: /sys/class/rc/rc<N>/wakeup_filter_mask +Date: Jan 2014 +KernelVersion: 3.15 +Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> +Description: + Sets the scancode wakeup filter mask of bits to compare. + + Use in combination with /sys/class/rc/rcN/wakeup_filter to set + the bits of the scancode which should be compared against the + expected value to trigger a system wake event. + + If the hardware supports it and wakeup_filter_mask is not 0 then + scancodes which match the filter will wake the system from e.g. + suspend to RAM or power off. + + Otherwise the write will fail with an error. + + This value may be reset to 0 if the wakeup protocol is altered. diff --git a/Documentation/ABI/testing/sysfs-class-rc-nuvoton b/Documentation/ABI/testing/sysfs-class-rc-nuvoton new file mode 100644 index 000000000..f7bad8ecd --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rc-nuvoton @@ -0,0 +1,15 @@ +What: /sys/class/rc/rc<N>/wakeup_data +Date: Mar 2016 +KernelVersion: 4.6 +Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> +Description: + Reading this file returns the stored CIR wakeup sequence. + It starts with a pulse, followed by a space, pulse etc. + All values are in microseconds. + The same format can be used to store a wakeup sequence + in the Nuvoton chip by writing to this file. + + Note: Some systems reset the stored wakeup sequence to a + factory default on each boot. On such systems store the + wakeup sequence in a file and set it on boot using e.g. + a udev rule. diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator new file mode 100644 index 000000000..475b9a372 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -0,0 +1,453 @@ +What: /sys/class/regulator/.../state +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + state. This reports the regulator enable control, for + regulators which can report that input value. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'unknown' + + 'enabled' means the regulator output is ON and is supplying + power to the system (assuming no error prevents it). + + 'disabled' means the regulator output is OFF and is not + supplying power to the system (unless some non-Linux + control has enabled it). + + 'unknown' means software cannot determine the state, or + the reported state is invalid. + + NOTE: this field can be used in conjunction with microvolts + or microamps to determine configured regulator output levels. + + +What: /sys/class/regulator/.../status +Description: + Some regulator directories will contain a field called + "status". This reports the current regulator status, for + regulators which can report that output value. + + This will be one of the following strings: + + - off + - on + - error + - fast + - normal + - idle + - standby + + "off" means the regulator is not supplying power to the + system. + + "on" means the regulator is supplying power to the system, + and the regulator can't report a detailed operation mode. + + "error" indicates an out-of-regulation status such as being + disabled due to thermal shutdown, or voltage being unstable + because of problems with the input power supply. + + "fast", "normal", "idle", and "standby" are all detailed + regulator operation modes (described elsewhere). They + imply "on", but provide more detail. + + Note that regulator status is a function of many inputs, + not limited to control inputs from Linux. For example, + the actual load presented may trigger "error" status; or + a regulator may be enabled by another user, even though + Linux did not enable it. + + +What: /sys/class/regulator/.../type +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Each regulator directory will contain a field called + type. This holds the regulator type. + + This will be one of the following strings: + + - 'voltage' + - 'current' + - 'unknown' + + 'voltage' means the regulator output voltage can be controlled + by software. + + 'current' means the regulator output current limit can be + controlled by software. + + 'unknown' means software cannot control either voltage or + current limit. + + +What: /sys/class/regulator/.../microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + microvolts. This holds the regulator output voltage setting + measured in microvolts (i.e. E-6 Volts), for regulators + which can report the control input for voltage. + + NOTE: This value should not be used to determine the regulator + output voltage level as this value is the same regardless of + whether the regulator is enabled or disabled. + + +What: /sys/class/regulator/.../microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + microamps. This holds the regulator output current limit + setting measured in microamps (i.e. E-6 Amps), for regulators + which can report the control input for a current limit. + + NOTE: This value should not be used to determine the regulator + output current level as this value is the same regardless of + whether the regulator is enabled or disabled. + + +What: /sys/class/regulator/.../opmode +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + opmode. This holds the current regulator operating mode, + for regulators which can report that control input value. + + The opmode value can be one of the following strings: + + - 'fast' + - 'normal' + - 'idle' + - 'standby' + - 'unknown' + + The modes are described in include/linux/regulator/consumer.h + + NOTE: This value should not be used to determine the regulator + output operating mode as this value is the same regardless of + whether the regulator is enabled or disabled. A "status" + attribute may be available to determine the actual mode. + + +What: /sys/class/regulator/.../min_microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + min_microvolts. This holds the minimum safe working regulator + output voltage setting for this domain measured in microvolts, + for regulators which support voltage constraints. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no min microvolts constraint defined by + platform code. + + +What: /sys/class/regulator/.../max_microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + max_microvolts. This holds the maximum safe working regulator + output voltage setting for this domain measured in microvolts, + for regulators which support voltage constraints. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no max microvolts constraint defined by + platform code. + + +What: /sys/class/regulator/.../min_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + min_microamps. This holds the minimum safe working regulator + output current limit setting for this domain measured in + microamps, for regulators which support current constraints. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no min microamps constraint defined by + platform code. + + +What: /sys/class/regulator/.../max_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + max_microamps. This holds the maximum safe working regulator + output current limit setting for this domain measured in + microamps, for regulators which support current constraints. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no max microamps constraint defined by + platform code. + + +What: /sys/class/regulator/.../name +Date: October 2008 +KernelVersion: 2.6.28 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Each regulator directory will contain a field called + name. This holds a string identifying the regulator for + display purposes. + + NOTE: this will be empty if no suitable name is provided + by platform or regulator drivers. + + +What: /sys/class/regulator/.../num_users +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Each regulator directory will contain a field called + num_users. This holds the number of consumer devices that + have called regulator_enable() on this regulator. + + +What: /sys/class/regulator/.../requested_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + requested_microamps. This holds the total requested load + current in microamps for this regulator from all its consumer + devices. + + +What: /sys/class/regulator/.../parent +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a link called parent. + This points to the parent or supply regulator if one exists. + +What: /sys/class/regulator/.../suspend_mem_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + suspend_mem_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to memory, for voltage regulators + implementing suspend voltage configuration constraints. + +What: /sys/class/regulator/.../suspend_disk_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + suspend_disk_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to disk, for voltage regulators + implementing suspend voltage configuration constraints. + +What: /sys/class/regulator/.../suspend_standby_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + suspend_standby_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to standby, for voltage regulators + implementing suspend voltage configuration constraints. + +What: /sys/class/regulator/.../suspend_mem_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + suspend_mem_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to + memory, for regulators implementing suspend mode + configuration constraints. + +What: /sys/class/regulator/.../suspend_disk_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + suspend_disk_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to disk, + for regulators implementing suspend mode configuration + constraints. + +What: /sys/class/regulator/.../suspend_standby_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + suspend_standby_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to + standby, for regulators implementing suspend mode + configuration constraints. + +What: /sys/class/regulator/.../suspend_mem_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + suspend_mem_state. This holds the regulator operating state + when suspended to memory, for regulators implementing suspend + configuration constraints. + + This will be one of the same strings reported by + the "state" attribute. + +What: /sys/class/regulator/.../suspend_disk_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + suspend_disk_state. This holds the regulator operating state + when suspended to disk, for regulators implementing + suspend configuration constraints. + + This will be one of the same strings reported by + the "state" attribute. + +What: /sys/class/regulator/.../suspend_standby_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood <lrg@slimlogic.co.uk> +Description: + Some regulator directories will contain a field called + suspend_standby_state. This holds the regulator operating + state when suspended to standby, for regulators implementing + suspend configuration constraints. + + This will be one of the same strings reported by + the "state" attribute. + +What: /sys/class/regulator/.../bypass +Date: September 2012 +KernelVersion: 3.7 +Contact: Mark Brown <broonie@opensource.wolfsonmicro.com> +Description: + Some regulator directories will contain a field called + bypass. This indicates if the device is in bypass mode. + + This will be one of the following strings: + + - 'enabled' + - 'disabled' + - 'unknown' + + 'enabled' means the regulator is in bypass mode. + + 'disabled' means that the regulator is regulating. + + 'unknown' means software cannot determine the state, or + the reported state is invalid. + +What: /sys/class/regulator/.../under_voltage +Date: April 2022 +KernelVersion: 5.18 +Contact: Zev Weiss <zev@bewilderbeest.net> +Description: + Some regulator directories will contain a field called + under_voltage. This indicates if the device reports an + under-voltage fault (1) or not (0). + +What: /sys/class/regulator/.../over_current +Date: April 2022 +KernelVersion: 5.18 +Contact: Zev Weiss <zev@bewilderbeest.net> +Description: + Some regulator directories will contain a field called + over_current. This indicates if the device reports an + over-current fault (1) or not (0). + +What: /sys/class/regulator/.../regulation_out +Date: April 2022 +KernelVersion: 5.18 +Contact: Zev Weiss <zev@bewilderbeest.net> +Description: + Some regulator directories will contain a field called + regulation_out. This indicates if the device reports an + out-of-regulation fault (1) or not (0). + +What: /sys/class/regulator/.../fail +Date: April 2022 +KernelVersion: 5.18 +Contact: Zev Weiss <zev@bewilderbeest.net> +Description: + Some regulator directories will contain a field called + fail. This indicates if the device reports an output failure + (1) or not (0). + +What: /sys/class/regulator/.../over_temp +Date: April 2022 +KernelVersion: 5.18 +Contact: Zev Weiss <zev@bewilderbeest.net> +Description: + Some regulator directories will contain a field called + over_temp. This indicates if the device reports an + over-temperature fault (1) or not (0). + +What: /sys/class/regulator/.../under_voltage_warn +Date: April 2022 +KernelVersion: 5.18 +Contact: Zev Weiss <zev@bewilderbeest.net> +Description: + Some regulator directories will contain a field called + under_voltage_warn. This indicates if the device reports an + under-voltage warning (1) or not (0). + +What: /sys/class/regulator/.../over_current_warn +Date: April 2022 +KernelVersion: 5.18 +Contact: Zev Weiss <zev@bewilderbeest.net> +Description: + Some regulator directories will contain a field called + over_current_warn. This indicates if the device reports an + over-current warning (1) or not (0). + +What: /sys/class/regulator/.../over_voltage_warn +Date: April 2022 +KernelVersion: 5.18 +Contact: Zev Weiss <zev@bewilderbeest.net> +Description: + Some regulator directories will contain a field called + over_voltage_warn. This indicates if the device reports an + over-voltage warning (1) or not (0). + +What: /sys/class/regulator/.../over_temp_warn +Date: April 2022 +KernelVersion: 5.18 +Contact: Zev Weiss <zev@bewilderbeest.net> +Description: + Some regulator directories will contain a field called + over_temp_warn. This indicates if the device reports an + over-temperature warning (1) or not (0). diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc new file mode 100644 index 000000000..0c9ee5509 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-remoteproc @@ -0,0 +1,104 @@ +What: /sys/class/remoteproc/.../firmware +Date: October 2016 +Contact: Matt Redfearn <matt.redfearn@mips.com> +Description: Remote processor firmware + + Reports the name of the firmware currently loaded to the + remote processor. + + To change the running firmware, ensure the remote processor is + stopped (using /sys/class/remoteproc/.../state) and write a new filename. + +What: /sys/class/remoteproc/.../state +Date: October 2016 +Contact: Matt Redfearn <matt.redfearn@mips.com> +Description: Remote processor state + + Reports the state of the remote processor, which will be one of: + + - "offline" + - "suspended" + - "running" + - "crashed" + - "invalid" + + "offline" means the remote processor is powered off. + + "suspended" means that the remote processor is suspended and + must be woken to receive messages. + + "running" is the normal state of an available remote processor + + "crashed" indicates that a problem/crash has been detected on + the remote processor. + + "invalid" is returned if the remote processor is in an + unknown state. + + Writing this file controls the state of the remote processor. + The following states can be written: + + - "start" + - "stop" + + Writing "start" will attempt to start the processor running the + firmware indicated by, or written to, + /sys/class/remoteproc/.../firmware. The remote processor should + transition to "running" state. + + Writing "stop" will attempt to halt the remote processor and + return it to the "offline" state. + +What: /sys/class/remoteproc/.../name +Date: August 2019 +KernelVersion: 5.4 +Contact: Suman Anna <s-anna@ti.com> +Description: Remote processor name + + Reports the name of the remote processor. This can be used by + userspace in exactly identifying a remote processor and ease + up the usage in modifying the 'firmware' or 'state' files. + +What: /sys/class/remoteproc/.../coredump +Date: July 2020 +Contact: Bjorn Andersson <bjorn.andersson@linaro.org>, Ohad Ben-Cohen <ohad@wizery.com> +Description: Remote processor coredump configuration + + Reports the coredump configuration of the remote processor, + which will be one of: + + "disabled" + "enabled" + "inline" + + "disabled" means no dump will be collected. + + "enabled" means when the remote processor's coredump is + collected it will be copied to a separate buffer and that + buffer is exposed to userspace. + + "inline" means when the remote processor's coredump is + collected userspace will directly read from the remote + processor's device memory. Extra buffer will not be used to + copy the dump. Also recovery process will not proceed until + all data is read by usersapce. + +What: /sys/class/remoteproc/.../recovery +Date: July 2020 +Contact: Bjorn Andersson <bjorn.andersson@linaro.org>, Ohad Ben-Cohen <ohad@wizery.com> +Description: Remote processor recovery mechanism + + Reports the recovery mechanism of the remote processor, + which will be one of: + + "enabled" + "disabled" + + "enabled" means, the remote processor will be automatically + recovered whenever it crashes. Moreover, if the remote + processor crashes while recovery is disabled, it will + be automatically recovered too as soon as recovery is enabled. + + "disabled" means, a remote processor will remain in a crashed + state if it crashes. This is useful for debugging purposes; + without it, debugging a crash is substantially harder. diff --git a/Documentation/ABI/testing/sysfs-class-rnbd-client b/Documentation/ABI/testing/sysfs-class-rnbd-client new file mode 100644 index 000000000..0b5997ab3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rnbd-client @@ -0,0 +1,133 @@ +What: /sys/class/rnbd-client +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Provide information about RNBD-client. + All sysfs files that are not read-only provide the usage information on read: + + Example:: + + # cat /sys/class/rnbd-client/ctl/map_device + + > Usage: echo "sessname=<name of the rtrs session> path=<[srcaddr,]dstaddr> + > [path=<[srcaddr,]dstaddr>] device_path=<full path on remote side> + > [access_mode=<ro|rw|migration>] > map_device + > + > addr ::= [ ip:<ipv4> | ip:<ipv6> | gid:<gid> ] + +What: /sys/class/rnbd-client/ctl/map_device +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Expected format is the following:: + + sessname=<name of the rtrs session> + path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...] + device_path=<full path on remote side> + [access_mode=<ro|rw|migration>] + + Where: + + sessname: + accepts a string not bigger than 256 chars, which identifies + a given session on the client and on the server. + I.e. "clt_hostname-srv_hostname" could be a natural choice. + + path: + describes a connection between the client and the server by + specifying destination and, when required, the source address. + The addresses are to be provided in the following format:: + + ip:<IPv6> + ip:<IPv4> + gid:<GID> + + for example:: + + path=ip:10.0.0.66 + + The single addr is treated as the destination. + The connection will be established to this server from any client IP address. + + :: + + path=ip:10.0.0.66,ip:10.0.1.66 + + First addr is the source address and the second is the destination. + + If multiple "path=" options are specified multiple connection + will be established and data will be sent according to + the selected multipath policy (see RTRS mp_policy sysfs entry description). + + device_path: + Path to the block device on the server side. Path is specified + relative to the directory on server side configured in the + 'dev_search_path' module parameter of the rnbd_server. + The rnbd_server prepends the <device_path> received from client + with <dev_search_path> and tries to open the + <dev_search_path>/<device_path> block device. On success, + a /dev/rnbd<N> device file, a /sys/block/rnbd<N>/ + directory and an entry in /sys/class/rnbd-client/ctl/devices + will be created. + + If 'dev_search_path' contains '%SESSNAME%', then each session can + have different devices namespace, e.g. server was configured with + the following parameter "dev_search_path=/run/rnbd-devs/%SESSNAME%", + client has this string "sessname=blya device_path=sda", then server + will try to open: /run/rnbd-devs/blya/sda. + + access_mode: + the access_mode parameter specifies if the device is to be + mapped as "ro" read-only or "rw" read-write. The server allows + a device to be exported in rw mode only once. The "migration" + access mode has to be specified if a second mapping in read-write + mode is desired. + + By default "rw" is used. + + nr_poll_queues + specifies the number of poll-mode queues. If the IO has HIPRI flag, + the block-layer will send the IO via the poll-mode queue. + For fast network and device the polling is faster than interrupt-base + IO handling because it saves time for context switching, switching to + another process, handling the interrupt and switching back to the + issuing process. + + Set -1 if you want to set it as the number of CPUs + By default rnbd client creates only irq-mode queues. + + NOTICE: MUST make a unique session for a device using the poll-mode queues. + + Exit Codes: + + If the device is already mapped it will fail with EEXIST. If the input + has an invalid format it will return EINVAL. If the device path cannot + be found on the server, it will fail with ENOENT. + + Finding device file after mapping + --------------------------------- + + After mapping, the device file can be found by: + o The symlink /sys/class/rnbd-client/ctl/devices/<device_id>@<session_name> + points to /sys/block/<dev-name>. The last part of the symlink destination + is the same as the device name. By extracting the last part of the + path the path to the device /dev/<dev-name> can be build. + + * /dev/block/$(cat /sys/class/rnbd-client/ctl/devices/<device_id>@<session_name>/dev) + + How to find the <device_id> of the device is described on the next + section. + +What: /sys/class/rnbd-client/ctl/devices/ +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: For each device mapped on the client a new symbolic link is created as + /sys/class/rnbd-client/ctl/devices/<device_id>@<session_name>, which points + to the block device created by rnbd (/sys/block/rnbd<N>/). + The <device_id> of each device is created as follows: + + - If the 'device_path' provided during mapping contains slashes ("/"), + they are replaced by exclamation mark ("!") and used as as the + <device_id>. Otherwise, the <device_id> will be the same as the + "device_path" provided. diff --git a/Documentation/ABI/testing/sysfs-class-rnbd-server b/Documentation/ABI/testing/sysfs-class-rnbd-server new file mode 100644 index 000000000..6c5996cd7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rnbd-server @@ -0,0 +1,58 @@ +What: /sys/class/rnbd-server +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: provide information about RNBD-server. + +What: /sys/class/rnbd-server/ctl/ +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: When a client maps a device, a directory entry with the name of the + block device is created under /sys/class/rnbd-server/ctl/devices/. + +What: /sys/class/rnbd-server/ctl/devices/<device_name>/block_dev +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Is a symlink to the sysfs entry of the exported device. + + Example: + block_dev -> ../../../../class/block/ram0 + +What: /sys/class/rnbd-server/ctl/devices/<device_name>/sessions/ +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: For each client a particular device is exported to, following directory will be + created: + + /sys/class/rnbd-server/ctl/devices/<device_name>/sessions/<session-name>/ + + When the device is unmapped by that client, the directory will be removed. + +What: /sys/class/rnbd-server/ctl/devices/<device_name>/sessions/<session-name>/read_only +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Contains '1' if device is mapped read-only, otherwise '0'. + +What: /sys/class/rnbd-server/ctl/devices/<device_name>/sessions/<session-name>/mapping_path +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Contains the relative device path provided by the user during mapping. + +What: /sys/class/rnbd-server/ctl/devices/<device_name>/sessions/<session-name>/access_mode +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Contains the device access mode: ro, rw or migration. + +What: /sys/class/rnbd-server/ctl/devices/<device_name>/sessions/<session-name>/force_close +Date: Nov 2020 +KernelVersion: 5.10 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Write "1" to the file to close the device on server side. Please + note that the client side device will not be closed, read or + write to the device will get -ENOTCONN. diff --git a/Documentation/ABI/testing/sysfs-class-rtc b/Documentation/ABI/testing/sysfs-class-rtc new file mode 100644 index 000000000..95984289a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rtc @@ -0,0 +1,91 @@ +What: /sys/class/rtc/ +Date: March 2006 +KernelVersion: 2.6.17 +Contact: linux-rtc@vger.kernel.org +Description: + The rtc/ class subdirectory belongs to the RTC subsystem. + +What: /sys/class/rtc/rtcX/ +Date: March 2006 +KernelVersion: 2.6.17 +Contact: linux-rtc@vger.kernel.org +Description: + The /sys/class/rtc/rtc{0,1,2,3,...} directories correspond + to each RTC device. + +What: /sys/class/rtc/rtcX/date +Date: March 2006 +KernelVersion: 2.6.17 +Contact: linux-rtc@vger.kernel.org +Description: + (RO) RTC-provided date in YYYY-MM-DD format + +What: /sys/class/rtc/rtcX/hctosys +Date: September 2009 +KernelVersion: 2.6.32 +Contact: linux-rtc@vger.kernel.org +Description: + (RO) 1 if the RTC provided the system time at boot via the + CONFIG_RTC_HCTOSYS kernel option, 0 otherwise + +What: /sys/class/rtc/rtcX/max_user_freq +Date: October 2007 +KernelVersion: 2.6.24 +Contact: linux-rtc@vger.kernel.org +Description: + (RW) The maximum interrupt rate an unprivileged user may request + from this RTC. + +What: /sys/class/rtc/rtcX/name +Date: March 2006 +KernelVersion: 2.6.17 +Contact: linux-rtc@vger.kernel.org +Description: + (RO) The name of the RTC corresponding to this sysfs directory + +What: /sys/class/rtc/rtcX/range +Date: January 2018 +KernelVersion: 4.16 +Contact: linux-rtc@vger.kernel.org +Description: + Valid time range for the RTC, as seconds from epoch, formatted + as [min, max] + +What: /sys/class/rtc/rtcX/since_epoch +Date: March 2006 +KernelVersion: 2.6.17 +Contact: linux-rtc@vger.kernel.org +Description: + (RO) RTC-provided time as the number of seconds since the epoch + +What: /sys/class/rtc/rtcX/time +Date: March 2006 +KernelVersion: 2.6.17 +Contact: linux-rtc@vger.kernel.org +Description: + (RO) RTC-provided time in 24-hour notation (hh:mm:ss) + +What: /sys/class/rtc/rtcX/offset +Date: February 2016 +KernelVersion: 4.6 +Contact: linux-rtc@vger.kernel.org +Description: + (RW) The amount which the rtc clock has been adjusted in + firmware. Visible only if the driver supports clock offset + adjustment. The unit is parts per billion, i.e. The number of + clock ticks which are added to or removed from the rtc's base + clock per billion ticks. A positive value makes a day pass more + slowly, longer, and a negative value makes a day pass more + quickly. + +What: /sys/class/rtc/rtcX/wakealarm +Date: February 2007 +KernelVersion: 2.6.20 +Contact: linux-rtc@vger.kernel.org +Description: + (RW) The time at which the clock will generate a system wakeup + event. This is a one shot wakeup event, so must be reset after + wake if a daily wakeup is required. Format is seconds since the + epoch by default, or if there's a leading +, seconds in the + future, or if there is a leading +=, seconds ahead of the + current alarm. diff --git a/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration b/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration new file mode 100644 index 000000000..ee8ed6494 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rtc-rtc0-device-rtc_calibration @@ -0,0 +1,14 @@ +What: /sys/class/rtc/rtc0/device/rtc_calibration +Date: Oct 2011 +KernelVersion: 3.0 +Contact: Mark Godfrey <mark.godfrey@stericsson.com> +Description: Attribute for calibrating ST-Ericsson AB8500 Real Time Clock + The rtc_calibration attribute allows the userspace to + calibrate the AB8500.s 32KHz Real Time Clock. + Every 60 seconds the AB8500 will correct the RTC's value + by adding to it the value of this attribute. + + The range of the attribute is -127 to +127 in units of + 30.5 micro-seconds (half-parts-per-million of the 32KHz clock) +Users: The /vendor/st-ericsson/base_utilities/core/rtc_calibration + daemon uses this interface. diff --git a/Documentation/ABI/testing/sysfs-class-rtrs-client b/Documentation/ABI/testing/sysfs-class-rtrs-client new file mode 100644 index 000000000..fecc59d1b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rtrs-client @@ -0,0 +1,146 @@ +What: /sys/class/rtrs-client +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: When a user of RTRS API creates a new session, a directory entry with + the name of that session is created under /sys/class/rtrs-client/<session-name>/ + +What: /sys/class/rtrs-client/<session-name>/add_path +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RW, adds a new path (connection) to an existing session. Expected format is the + following:: + + <[source addr,]destination addr> + *addr ::= [ ip:<ipv4|ipv6> | gid:<gid> ] + +What: /sys/class/rtrs-client/<session-name>/max_reconnect_attempts +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Maximum number reconnect attempts the client should make before giving up + after connection breaks unexpectedly. + +What: /sys/class/rtrs-client/<session-name>/mp_policy +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Multipath policy specifies which path should be selected on each IO: + + round-robin (0): + select path in per CPU round-robin manner. + + min-inflight (1): + select path with minimum inflights. + + min-latency (2): + select path with minimum latency. + +What: /sys/class/rtrs-client/<session-name>/paths/ +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Each path belonging to a given session is listed here by its source and + destination address. When a new path is added to a session by writing to + the "add_path" entry, a directory <src@dst> is created. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/state +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains "connected" if the session is connected to the peer and fully + functional. Otherwise the file contains "disconnected" + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/reconnect +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Write "1" to the file in order to reconnect the path. + Operation is blocking and returns 0 if reconnect was successful. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/disconnect +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Write "1" to the file in order to disconnect the path. + Operation blocks until RTRS path is disconnected. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/remove_path +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Write "1" to the file in order to disconnected and remove the path + from the session. Operation blocks until the path is disconnected + and removed from the session. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/hca_name +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the name of HCA the connection established on. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/hca_port +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the port number of active port traffic is going through. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/src_addr +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the source address of the path + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/dst_addr +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the destination address of the path + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/cur_latency +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the latency time calculated by the heart-beat messages. + Whenever the client sends heart-beat message, it checks the time gap + between sending the heart-beat message and receiving the ACK. + This value can be changed regularly. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/reset_all +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RW, Read will return usage help, write 0 will clear all the statistics. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/cpu_migration +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RTRS expects that each HCA IRQ is pinned to a separate CPU. If it's + not the case, the processing of an I/O response could be processed on a + different CPU than where it was originally submitted. This file shows + how many interrupts where generated on a non expected CPU. + + "from:" + is the CPU on which the IRQ was expected, but not generated. + "to:" + is the CPU on which the IRQ was generated, but not expected. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/reconnects +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Contains 2 unsigned int values, the first one records number of successful + reconnects in the path lifetime, the second one records number of failed + reconnects in the path lifetime. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/rdma +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Contains statistics regarding rdma operations and inflight operations. + The output consists of 6 values:: + + <read-count> <read-total-size> <write-count> \ + <write-total-size> <inflights> <failovered> diff --git a/Documentation/ABI/testing/sysfs-class-rtrs-server b/Documentation/ABI/testing/sysfs-class-rtrs-server new file mode 100644 index 000000000..b08601d80 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rtrs-server @@ -0,0 +1,53 @@ +What: /sys/class/rtrs-server +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: When a user of RTRS API creates a new session on a client side, a + directory entry with the name of that session is created in here. + +What: /sys/class/rtrs-server/<session-name>/paths/ +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: When new path is created by writing to "add_path" entry on client side, + a directory entry named as <source address>@<destination address> is created + on server. + +What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/disconnect +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: When "1" is written to the file, the RTRS session is being disconnected. + Operations is non-blocking and returns control immediately to the caller. + +What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/hca_name +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the name of HCA the connection established on. + +What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/hca_port +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the port number of active port traffic is going through. + +What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/src_addr +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the source address of the path + +What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/dst_addr +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the destination address of the path + +What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/stats/rdma +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Contains statistics regarding rdma operations and inflight operations. + The output consists of 5 values: + <read-count> <read-total-size> <write-count> <write-total-size> <inflights> diff --git a/Documentation/ABI/testing/sysfs-class-scsi_host b/Documentation/ABI/testing/sysfs-class-scsi_host new file mode 100644 index 000000000..7c98d8f43 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-scsi_host @@ -0,0 +1,119 @@ +What: /sys/class/scsi_host/hostX/isci_id +Date: June 2011 +Contact: Dave Jiang <dave.jiang@intel.com> +Description: + This file contains the enumerated host ID for the Intel + SCU controller. The Intel(R) C600 Series Chipset SATA/SAS + Storage Control Unit embeds up to two 4-port controllers in + a single PCI device. The controllers are enumerated in order + which usually means the lowest number scsi_host corresponds + with the first controller, but this association is not + guaranteed. The 'isci_id' attribute unambiguously identifies + the controller index: '0' for the first controller, + '1' for the second. + +What: /sys/class/scsi_host/hostX/acciopath_status +Date: November 2013 +Contact: Stephen M. Cameron <scameron@beardog.cce.hp.com> +Description: This file contains the current status of the "SSD Smart Path" + feature of HP Smart Array RAID controllers using the hpsa + driver. SSD Smart Path, when enabled permits the driver to + send i/o requests directly to physical devices that are part + of a logical drive, bypassing the controllers firmware RAID + stack for a performance advantage when possible. A value of + '1' indicates the feature is enabled, and the controller may + use the direct i/o path to physical devices. A value of zero + means the feature is disabled and the controller may not use + the direct i/o path to physical devices. This setting is + controller wide, affecting all configured logical drives on the + controller. This file is readable and writable. + +What: /sys/class/scsi_host/hostX/link_power_management_policy +Date: Oct, 2007 +KernelVersion: v2.6.24 +Contact: linux-ide@vger.kernel.org +Description: + (RW) This parameter allows the user to read and set the link + (interface) power management. + + There are four possible options: + + min_power: Tell the controller to try to make the link use the + least possible power when possible. This may sacrifice some + performance due to increased latency when coming out of lower + power states. + + max_performance: Generally, this means no power management. + Tell the controller to have performance be a priority over power + management. + + medium_power: Tell the controller to enter a lower power state + when possible, but do not enter the lowest power state, thus + improving latency over min_power setting. + + med_power_with_dipm: Identical to the existing medium_power + setting except that it enables dipm (device initiated power + management) on top, which makes it match the Windows IRST (Intel + Rapid Storage Technology) driver settings. This setting is also + close to min_power, except that: + + a) It does not use host-initiated slumber mode, but it does + allow device-initiated slumber + b) It does not enable low power device sleep mode (DevSlp). + +What: /sys/class/scsi_host/hostX/em_message +What: /sys/class/scsi_host/hostX/em_message_type +Date: Jun, 2008 +KernelVersion: v2.6.27 +Contact: linux-ide@vger.kernel.org +Description: + em_message: (RW) Enclosure management support. For the LED + protocol, writes and reads correspond to the LED message format + as defined in the AHCI spec. + + The user must turn sw_activity (under `/sys/block/*/device/`) + OFF it they wish to control the activity LED via the em_message + file. + + em_message_type: (RO) Displays the current enclosure management + protocol that is being used by the driver (for eg. LED, SAF-TE, + SES-2, SGPIO etc). + +What: /sys/class/scsi_host/hostX/ahci_port_cmd +What: /sys/class/scsi_host/hostX/ahci_host_caps +What: /sys/class/scsi_host/hostX/ahci_host_cap2 +Date: Mar, 2010 +KernelVersion: v2.6.35 +Contact: linux-ide@vger.kernel.org +Description: + [to be documented] + +What: /sys/class/scsi_host/hostX/ahci_host_version +Date: Mar, 2010 +KernelVersion: v2.6.35 +Contact: linux-ide@vger.kernel.org +Description: + (RO) Display the version of the AHCI spec implemented by the + host. + +What: /sys/class/scsi_host/hostX/em_buffer +Date: Apr, 2010 +KernelVersion: v2.6.35 +Contact: linux-ide@vger.kernel.org +Description: + (RW) Allows access to AHCI EM (enclosure management) buffer + directly if the host supports EM. + + For eg. the AHCI driver supports SGPIO EM messages but the + SATA/AHCI specs do not define the SGPIO message format of the EM + buffer. Different hardware(HW) vendors may have different + definitions. With the em_buffer attribute, this issue can be + solved by allowing HW vendors to provide userland drivers and + tools for their SGPIO initiators. + +What: /sys/class/scsi_host/hostX/em_message_supported +Date: Oct, 2009 +KernelVersion: v2.6.39 +Contact: linux-ide@vger.kernel.org +Description: + (RO) Displays supported enclosure management message types. diff --git a/Documentation/ABI/testing/sysfs-class-scsi_tape b/Documentation/ABI/testing/sysfs-class-scsi_tape new file mode 100644 index 000000000..9be398b87 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-scsi_tape @@ -0,0 +1,109 @@ +What: /sys/class/scsi_tape/*/stats/in_flight +Date: Apr 2015 +KernelVersion: 4.2 +Contact: Shane Seymour <shane.seymour@hp.com> +Description: + Show the number of I/Os currently in-flight between the st + module and the SCSI mid-layer. +Users: + + +What: /sys/class/scsi_tape/*/stats/io_ns +Date: Apr 2015 +KernelVersion: 4.2 +Contact: Shane Seymour <shane.seymour@hp.com> +Description: + Shows the total amount of time spent waiting for all I/O + to and from the tape drive to complete. This includes all + reads, writes, and other SCSI commands issued to the tape + drive. An example of other SCSI commands would be tape + movement such as a rewind when a rewind tape device is + closed. This item is measured in nanoseconds. + + To determine the amount of time spent waiting for other I/O + to complete subtract read_ns and write_ns from this value. +Users: + + +What: /sys/class/scsi_tape/*/stats/other_cnt +Date: Apr 2015 +KernelVersion: 4.2 +Contact: Shane Seymour <shane.seymour@hp.com> +Description: + The number of I/O requests issued to the tape drive other + than SCSI read/write requests. +Users: + + +What: /sys/class/scsi_tape/*/stats/read_byte_cnt +Date: Apr 2015 +KernelVersion: 4.2 +Contact: Shane Seymour <shane.seymour@hp.com> +Description: + Shows the total number of bytes requested from the tape drive. + This value is presented in bytes because tape drives support + variable length block sizes. +Users: + + +What: /sys/class/scsi_tape/*/stats/read_cnt +Date: Apr 2015 +KernelVersion: 4.2 +Contact: Shane Seymour <shane.seymour@hp.com> +Description: + Shows the total number of read requests issued to the tape + drive. +Users: + + +What: /sys/class/scsi_tape/*/stats/read_ns +Date: Apr 2015 +KernelVersion: 4.2 +Contact: Shane Seymour <shane.seymour@hp.com> +Description: + Shows the total amount of time in nanoseconds waiting for + read I/O requests to complete. +Users: + + +What: /sys/class/scsi_tape/*/stats/write_byte_cnt +Date: Apr 2015 +KernelVersion: 4.2 +Contact: Shane Seymour <shane.seymour@hp.com> +Description: + Shows the total number of bytes written to the tape drive. + This value is presented in bytes because tape drives support + variable length block sizes. +Users: + + +What: /sys/class/scsi_tape/*/stats/write_cnt +Date: Apr 2015 +KernelVersion: 4.2 +Contact: Shane Seymour <shane.seymour@hp.com> +Description: + Shows the total number of write requests issued to the tape + drive. +Users: + + +What: /sys/class/scsi_tape/*/stats/write_ms +Date: Apr 2015 +KernelVersion: 4.2 +Contact: Shane Seymour <shane.seymour@hp.com> +Description: + Shows the total amount of time in nanoseconds waiting for + write I/O requests to complete. +Users: + + +What: /sys/class/scsi_tape/*/stats/resid_cnt +Date: Apr 2015 +KernelVersion: 4.2 +Contact: Shane Seymour <shane.seymour@hp.com> +Description: + Shows the number of times we found that a residual >0 + was found when the SCSI midlayer indicated that there was + an error. For reads this may be a case of someone issuing + reads greater than the block size. +Users: diff --git a/Documentation/ABI/testing/sysfs-class-spi-eeprom b/Documentation/ABI/testing/sysfs-class-spi-eeprom new file mode 100644 index 000000000..1ff757982 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-spi-eeprom @@ -0,0 +1,19 @@ +What: /sys/class/spi_master/spi<bus>/spi<bus>.<dev>/fram +Date: June 2021 +KernelVersion: 5.14 +Contact: Jiri Prchal <jiri.prchal@aksignal.cz> +Description: + Contains the FRAM binary data. Same as EEPROM, just another file + name to indicate that it employs ferroelectric process. + It performs write operations at bus speed - no write delays. + +What: /sys/class/spi_master/spi<bus>/spi<bus>.<dev>/sernum +Date: May 2021 +KernelVersion: 5.14 +Contact: Jiri Prchal <jiri.prchal@aksignal.cz> +Description: + Contains the serial number of the Cypress FRAM (FM25VN) if it is + present. It will be displayed as a 8 byte hex string, as read + from the device. + + This is a read-only attribute. diff --git a/Documentation/ABI/testing/sysfs-class-stm b/Documentation/ABI/testing/sysfs-class-stm new file mode 100644 index 000000000..77ed3da0f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-stm @@ -0,0 +1,24 @@ +What: /sys/class/stm/<stm>/masters +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: + Shows first and last available to software master numbers on + this STM device. + +What: /sys/class/stm/<stm>/channels +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: + Shows the number of channels per master on this STM device. + +What: /sys/class/stm/<stm>/hw_override +Date: March 2016 +KernelVersion: 4.7 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: + Reads as 0 if master numbers in the STP stream produced by + this stm device will match the master numbers assigned by + the software or 1 if the stm hardware overrides software + assigned masters. diff --git a/Documentation/ABI/testing/sysfs-class-stm_source b/Documentation/ABI/testing/sysfs-class-stm_source new file mode 100644 index 000000000..57b8dd39b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-stm_source @@ -0,0 +1,11 @@ +What: /sys/class/stm_source/<stm_source>/stm_source_link +Date: June 2015 +KernelVersion: 4.3 +Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com> +Description: + stm_source device linkage to stm device, where its tracing data + is directed. Reads return an existing connection or "<none>" if + this stm_source is not connected to any stm device yet. + Write an existing (registered) stm device's name here to + connect that device. If a device is already connected to this + stm_source, it will first be disconnected. diff --git a/Documentation/ABI/testing/sysfs-class-switchtec b/Documentation/ABI/testing/sysfs-class-switchtec new file mode 100644 index 000000000..76c7a661a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-switchtec @@ -0,0 +1,96 @@ +switchtec - Microsemi Switchtec PCI Switch Management Endpoint + +For details on this subsystem look at Documentation/driver-api/switchtec.rst. + +What: /sys/class/switchtec +Date: 05-Jan-2017 +KernelVersion: v4.11 +Contact: Logan Gunthorpe <logang@deltatee.com> +Description: The switchtec class subsystem folder. + Each registered switchtec driver is represented by a switchtecX + subfolder (X being an integer >= 0). + + +What: /sys/class/switchtec/switchtec[0-9]+/component_id +Date: 05-Jan-2017 +KernelVersion: v4.11 +Contact: Logan Gunthorpe <logang@deltatee.com> +Description: Component identifier as stored in the hardware (eg. PM8543) + (read only) +Values: arbitrary string. + + +What: /sys/class/switchtec/switchtec[0-9]+/component_revision +Date: 05-Jan-2017 +KernelVersion: v4.11 +Contact: Logan Gunthorpe <logang@deltatee.com> +Description: Component revision stored in the hardware (read only) +Values: integer. + + +What: /sys/class/switchtec/switchtec[0-9]+/component_vendor +Date: 05-Jan-2017 +KernelVersion: v4.11 +Contact: Logan Gunthorpe <logang@deltatee.com> +Description: Component vendor as stored in the hardware (eg. MICROSEM) + (read only) +Values: arbitrary string. + + +What: /sys/class/switchtec/switchtec[0-9]+/device_version +Date: 05-Jan-2017 +KernelVersion: v4.11 +Contact: Logan Gunthorpe <logang@deltatee.com> +Description: Device version as stored in the hardware (read only) +Values: integer. + + +What: /sys/class/switchtec/switchtec[0-9]+/fw_version +Date: 05-Jan-2017 +KernelVersion: v4.11 +Contact: Logan Gunthorpe <logang@deltatee.com> +Description: Currently running firmware version (read only) +Values: integer (in hexadecimal). + + +What: /sys/class/switchtec/switchtec[0-9]+/partition +Date: 05-Jan-2017 +KernelVersion: v4.11 +Contact: Logan Gunthorpe <logang@deltatee.com> +Description: Partition number for this device in the switch (read only) +Values: integer. + + +What: /sys/class/switchtec/switchtec[0-9]+/partition_count +Date: 05-Jan-2017 +KernelVersion: v4.11 +Contact: Logan Gunthorpe <logang@deltatee.com> +Description: Total number of partitions in the switch (read only) +Values: integer. + + +What: /sys/class/switchtec/switchtec[0-9]+/product_id +Date: 05-Jan-2017 +KernelVersion: v4.11 +Contact: Logan Gunthorpe <logang@deltatee.com> +Description: Product identifier as stored in the hardware (eg. PSX 48XG3) + (read only) +Values: arbitrary string. + + +What: /sys/class/switchtec/switchtec[0-9]+/product_revision +Date: 05-Jan-2017 +KernelVersion: v4.11 +Contact: Logan Gunthorpe <logang@deltatee.com> +Description: Product revision stored in the hardware (eg. RevB) + (read only) +Values: arbitrary string. + + +What: /sys/class/switchtec/switchtec[0-9]+/product_vendor +Date: 05-Jan-2017 +KernelVersion: v4.11 +Contact: Logan Gunthorpe <logang@deltatee.com> +Description: Product vendor as stored in the hardware (eg. MICROSEM) + (read only) +Values: arbitrary string. diff --git a/Documentation/ABI/testing/sysfs-class-thermal b/Documentation/ABI/testing/sysfs-class-thermal new file mode 100644 index 000000000..8eee37982 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-thermal @@ -0,0 +1,259 @@ +What: /sys/class/thermal/thermal_zoneX/type +Description: + Strings which represent the thermal zone type. + This is given by thermal zone driver as part of registration. + E.g: "acpitz" indicates it's an ACPI thermal device. + In order to keep it consistent with hwmon sys attribute; this + shouldbe a short, lowercase string, not containing spaces nor + dashes. + + RO, Required + +What: /sys/class/thermal/thermal_zoneX/temp +Description: + Current temperature as reported by thermal zone (sensor). + + Unit: millidegree Celsius + + RO, Required + +What: /sys/class/thermal/thermal_zoneX/mode +Description: + One of the predefined values in [enabled, disabled]. + This file gives information about the algorithm that is + currently managing the thermal zone. It can be either default + kernel based algorithm or user space application. + + enabled + enable Kernel Thermal management. + disabled + Preventing kernel thermal zone driver actions upon + trip points so that user application can take full + charge of the thermal management. + + RW, Optional + +What: /sys/class/thermal/thermal_zoneX/policy +Description: + One of the various thermal governors used for a particular zone. + + RW, Required + +What: /sys/class/thermal/thermal_zoneX/available_policies +Description: + Available thermal governors which can be used for a + particular zone. + + RO, Required + +What: /sys/class/thermal/thermal_zoneX/trip_point_Y_temp +Description: + The temperature above which trip point will be fired. + + Unit: millidegree Celsius + + RO, Optional + +What: /sys/class/thermal/thermal_zoneX/trip_point_Y_type +Description: + Strings which indicate the type of the trip point. + + E.g. it can be one of critical, hot, passive, `active[0-*]` + for ACPI thermal zone. + + RO, Optional + +What: /sys/class/thermal/thermal_zoneX/trip_point_Y_hyst +Description: + The hysteresis value for a trip point, represented as an + integer. + + Unit: Celsius + + RW, Optional + +What: /sys/class/thermal/thermal_zoneX/cdevY +Description: + Sysfs link to the thermal cooling device node where the sys I/F + for cooling device throttling control represents. + + RO, Optional + +What: /sys/class/thermal/thermal_zoneX/cdevY_trip_point +Description: + The trip point in this thermal zone which `cdev[0-*]` is + associated with; -1 means the cooling device is not + associated with any trip point. + + RO, Optional + +What: /sys/class/thermal/thermal_zoneX/cdevY_weight +Description: + The influence of `cdev[0-*]` in this thermal zone. This value + is relative to the rest of cooling devices in the thermal + zone. For example, if a cooling device has a weight double + than that of other, it's twice as effective in cooling the + thermal zone. + + RW, Optional + +What: /sys/class/thermal/thermal_zoneX/emul_temp +Description: + Interface to set the emulated temperature method in thermal zone + (sensor). After setting this temperature, the thermal zone may + pass this temperature to platform emulation function if + registered or cache it locally. This is useful in debugging + different temperature threshold and its associated cooling + action. This is write only node and writing 0 on this node + should disable emulation. + + Unit: millidegree Celsius + + WO, Optional + + WARNING: + Be careful while enabling this option on production systems, + because userland can easily disable the thermal policy by simply + flooding this sysfs node with low temperature values. + + +What: /sys/class/thermal/thermal_zoneX/k_d +Description: + The derivative term of the power allocator governor's PID + controller. For more information see + Documentation/driver-api/thermal/power_allocator.rst + + RW, Optional + +What: /sys/class/thermal/thermal_zoneX/k_i +Description: + The integral term of the power allocator governor's PID + controller. This term allows the PID controller to compensate + for long term drift. For more information see + Documentation/driver-api/thermal/power_allocator.rst + + RW, Optional + +What: /sys/class/thermal/thermal_zoneX/k_po +Description: + The proportional term of the power allocator governor's PID + controller during temperature overshoot. Temperature overshoot + is when the current temperature is above the "desired + temperature" trip point. For more information see + Documentation/driver-api/thermal/power_allocator.rst + + RW, Optional + +What: /sys/class/thermal/thermal_zoneX/k_pu +Description: + The proportional term of the power allocator governor's PID + controller during temperature undershoot. Temperature undershoot + is when the current temperature is below the "desired + temperature" trip point. For more information see + Documentation/driver-api/thermal/power_allocator.rst + + RW, Optional + +What: /sys/class/thermal/thermal_zoneX/integral_cutoff +Description: + Temperature offset from the desired temperature trip point + above which the integral term of the power allocator + governor's PID controller starts accumulating errors. For + example, if integral_cutoff is 0, then the integral term only + accumulates error when temperature is above the desired + temperature trip point. For more information see + Documentation/driver-api/thermal/power_allocator.rst + + Unit: millidegree Celsius + + RW, Optional + +What: /sys/class/thermal/thermal_zoneX/slope +Description: + The slope constant used in a linear extrapolation model + to determine a hotspot temperature based off the sensor's + raw readings. It is up to the device driver to determine + the usage of these values. + + RW, Optional + +What: /sys/class/thermal/thermal_zoneX/offset +Description: + The offset constant used in a linear extrapolation model + to determine a hotspot temperature based off the sensor's + raw readings. It is up to the device driver to determine + the usage of these values. + + RW, Optional + +What: /sys/class/thermal/thermal_zoneX/sustainable_power +Description: + An estimate of the sustained power that can be dissipated by + the thermal zone. Used by the power allocator governor. For + more information see + Documentation/driver-api/thermal/power_allocator.rst + + Unit: milliwatts + + RW, Optional + +What: /sys/class/thermal/cooling_deviceX/type +Description: + String which represents the type of device, e.g: + + - for generic ACPI: should be "Fan", "Processor" or "LCD" + - for memory controller device on intel_menlow platform: + should be "Memory controller". + + RO, Required + +What: /sys/class/thermal/cooling_deviceX/max_state +Description: + The maximum permissible cooling state of this cooling device. + + RO, Required + +What: /sys/class/thermal/cooling_deviceX/cur_state +Description: + The current cooling state of this cooling device. + The value can any integer numbers between 0 and max_state: + + - cur_state == 0 means no cooling + - cur_state == max_state means the maximum cooling. + + RW, Required + +What: /sys/class/thermal/cooling_deviceX/stats/reset +Description: + Writing any value resets the cooling device's statistics. + + WO, Required + +What: /sys/class/thermal/cooling_deviceX/stats/time_in_state_ms: +Description: + The amount of time spent by the cooling device in various + cooling states. The output will have "<state> <time>" pair + in each line, which will mean this cooling device spent <time> + msec of time at <state>. + + Output will have one line for each of the supported states. + + RO, Required + +What: /sys/class/thermal/cooling_deviceX/stats/total_trans +Description: + A single positive value showing the total number of times + the state of a cooling device is changed. + + RO, Required + +What: /sys/class/thermal/cooling_deviceX/stats/trans_table +Description: + This gives fine grained information about all the cooling state + transitions. The cat output here is a two dimensional matrix, + where an entry <i,j> (row i, column j) represents the number + of transitions from State_i to State_j. If the transition + table is bigger than PAGE_SIZE, reading this will return + an -EFBIG error. + + RO, Required diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec new file mode 100644 index 000000000..281b995be --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-typec @@ -0,0 +1,348 @@ +USB Type-C port devices (eg. /sys/class/typec/port0/) + +What: /sys/class/typec/<port>/data_role +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The supported USB data roles. This attribute can be used for + requesting data role swapping on the port. Swapping is supported + as synchronous operation, so write(2) to the attribute will not + return until the operation has finished. The attribute is + notified about role changes so that poll(2) on the attribute + wakes up. Change on the role will also generate uevent + KOBJ_CHANGE on the port. The current role is show in brackets, + for example "[host] device" when DRP port is in host mode. + + Valid values: host, device + +What: /sys/class/typec/<port>/power_role +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The supported power roles. This attribute can be used to request + power role swap on the port. Swapping is supported as + synchronous operation, so write(2) to the attribute will not + return until the operation has finished. The attribute is + notified about role changes so that poll(2) on the attribute + wakes up. Change on the role will also generate uevent + KOBJ_CHANGE. The current role is show in brackets, for example + "[source] sink" when in source mode. + + Valid values: source, sink + +What: /sys/class/typec/<port>/port_type +Date: May 2017 +Contact: Badhri Jagan Sridharan <Badhri@google.com> +Description: + Indicates the type of the port. This attribute can be used for + requesting a change in the port type. Port type change is + supported as a synchronous operation, so write(2) to the + attribute will not return until the operation has finished. + + Valid values: + + ====== ============================================== + source (The port will behave as source only DFP port) + sink (The port will behave as sink only UFP port) + dual (The port will behave as dual-role-data and + dual-role-power port) + ====== ============================================== + +What: /sys/class/typec/<port>/vconn_source +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows is the port VCONN Source. This attribute can be used to + request VCONN swap to change the VCONN Source during connection + when both the port and the partner support USB Power Delivery. + Swapping is supported as synchronous operation, so write(2) to + the attribute will not return until the operation has finished. + The attribute is notified about VCONN source changes so that + poll(2) on the attribute wakes up. Change on VCONN source also + generates uevent KOBJ_CHANGE. + + Valid values: + + - "no" when the port is not the VCONN Source + - "yes" when the port is the VCONN Source + +What: /sys/class/typec/<port>/power_operation_mode +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows the current power operational mode the port is in. The + power operation mode means current level for VBUS. In case USB + Power Delivery communication is used for negotiating the levels, + power operation mode should show "usb_power_delivery". + + Valid values: + + - default + - 1.5A + - 3.0A + - usb_power_delivery + +What: /sys/class/typec/<port>/preferred_role +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The user space can notify the driver about the preferred role. + It should be handled as enabling of Try.SRC or Try.SNK, as + defined in USB Type-C specification, in the port drivers. By + default the preferred role should come from the platform. + + Valid values: source, sink, none (to remove preference) + +What: /sys/class/typec/<port>/supported_accessory_modes +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Space separated list of accessory modes, defined in the USB + Type-C specification, the port supports. + +What: /sys/class/typec/<port>/usb_power_delivery_revision +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Revision number of the supported USB Power Delivery + specification, or 0.0 when USB Power Delivery is not supported. + + Example values: + - "2.0": USB Power Delivery Release 2.0 + - "3.0": USB Power Delivery Release 3.0 + - "3.1": USB Power Delivery Release 3.1 + +What: /sys/class/typec/<port>-{partner|cable}/usb_power_delivery_revision +Date: January 2021 +Contact: Benson Leung <bleung@chromium.org> +Description: + Revision number of the supported USB Power Delivery + specification of the port partner or cable, or 0.0 when USB + Power Delivery is not supported. + + Example values: + - "2.0": USB Power Delivery Release 2.0 + - "3.0": USB Power Delivery Release 3.0 + - "3.1": USB Power Delivery Release 3.1 + +What: /sys/class/typec/<port>/usb_typec_revision +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Revision number of the supported USB Type-C specification. + +What: /sys/class/typec/<port>/orientation +Date: February 2020 +Contact: Badhri Jagan Sridharan <badhri@google.com> +Description: + Indicates the active orientation of the Type-C connector. + Valid values: + - "normal": CC1 orientation + - "reverse": CC2 orientation + - "unknown": Orientation cannot be determined. + +What: /sys/class/typec/<port>/select_usb_power_delivery +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Lists the USB Power Delivery Capabilities that the port can + advertise to the partner. The currently used capabilities are in + brackets. Selection happens by writing to the file. + +USB Type-C partner devices (eg. /sys/class/typec/port0-partner/) + +What: /sys/class/typec/<port>-partner/accessory_mode +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows the Accessory Mode name when the partner is an Accessory. + The Accessory Modes are defined in USB Type-C Specification. + +What: /sys/class/typec/<port>-partner/supports_usb_power_delivery +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows if the partner supports USB Power Delivery communication: + Valid values: yes, no + +What: /sys/class/typec/<port>-partner/number_of_alternate_modes +Date: November 2020 +Contact: Prashant Malani <pmalani@chromium.org> +Description: + Shows the number of alternate modes which are advertised by the partner + during Power Delivery discovery. This file remains hidden until a value + greater than or equal to 0 is set by Type C port driver. + +What: /sys/class/typec/<port>-partner/type +Date: December 2020 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: USB Power Delivery Specification defines a set of product types + for the partner devices. This file will show the product type of + the partner if it is known. Dual-role capable partners will have + both UFP and DFP product types defined, but only one that + matches the current role will be active at the time. If the + product type of the partner is not visible to the device driver, + this file will not exist. + + When the partner product type is detected, or changed with role + swap, uvevent is also raised that contains PRODUCT_TYPE=<product + type> (for example PRODUCT_TYPE=hub). + + Valid values: + + UFP / device role + ====================== ========================== + undefined - + hub PDUSB Hub + peripheral PDUSB Peripheral + psd Power Bank + ama Alternate Mode Adapter + ====================== ========================== + + DFP / host role + ====================== ========================== + undefined - + hub PDUSB Hub + host PDUSB Host + power_brick Power Brick + amc Alternate Mode Controller + ====================== ========================== + +What: /sys/class/typec/<port>-partner/identity/ +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This directory appears only if the port device driver is capable + of showing the result of Discover Identity USB power delivery + command. That will not always be possible even when USB power + delivery is supported, for example when USB power delivery + communication for the port is mostly handled in firmware. If the + directory exists, it will have an attribute file for every VDO + in Discover Identity command result. + +USB Type-C cable devices (eg. /sys/class/typec/port0-cable/) + +Note: Electronically Marked Cables will have a device also for one cable plug +(eg. /sys/class/typec/port0-plug0). If the cable is active and has also SOP +Double Prime controller (USB Power Deliver specification ch. 2.4) it will have +second device also for the other plug. Both plugs may have alternate modes as +described in USB Type-C and USB Power Delivery specifications. + +What: /sys/class/typec/<port>-cable/type +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: USB Power Delivery Specification defines a set of product types + for the cables. This file will show the product type of the + cable if it is known. If the product type of the cable is not + visible to the device driver, this file will not exist. + + When the cable product type is detected, uvevent is also raised + with PRODUCT_TYPE showing the product type of the cable. + + Valid values: + + ====================== ========================== + undefined - + active Active Cable + passive Passive Cable + ====================== ========================== + +What: /sys/class/typec/<port>-cable/plug_type +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Shows type of the plug on the cable: + + - type-a - Standard A + - type-b - Standard B + - type-c + - captive + +What: /sys/class/typec/<port>-<plug>/number_of_alternate_modes +Date: November 2020 +Contact: Prashant Malani <pmalani@chromium.org> +Description: + Shows the number of alternate modes which are advertised by the plug + associated with a particular cable during Power Delivery discovery. + This file remains hidden until a value greater than or equal to 0 + is set by Type C port driver. + + +USB Type-C partner/cable Power Delivery Identity objects + +NOTE: The following attributes will be applicable to both +partner (e.g /sys/class/typec/port0-partner/) and +cable (e.g /sys/class/typec/port0-cable/) devices. Consequently, the example file +paths below are prefixed with "/sys/class/typec/<port>-{partner|cable}/" to +reflect this. + +What: /sys/class/typec/<port>-{partner|cable}/identity/ +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This directory appears only if the port device driver is capable + of showing the result of Discover Identity USB power delivery + command. That will not always be possible even when USB power + delivery is supported, for example when USB power delivery + communication for the port is mostly handled in firmware. If the + directory exists, it will have an attribute file for every VDO + in Discover Identity command result. + +What: /sys/class/typec/<port>-{partner|cable}/identity/id_header +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + ID Header VDO part of Discover Identity command result. The + value will show 0 until Discover Identity command result becomes + available. The value can be polled. + +What: /sys/class/typec/<port>-{partner|cable}/identity/cert_stat +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Cert Stat VDO part of Discover Identity command result. The + value will show 0 until Discover Identity command result becomes + available. The value can be polled. + +What: /sys/class/typec/<port>-{partner|cable}/identity/product +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Product VDO part of Discover Identity command result. The value + will show 0 until Discover Identity command result becomes + available. The value can be polled. + +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo1 +Date: October 2020 +Contact: Prashant Malani <pmalani@chromium.org> +Description: + 1st Product Type VDO of Discover Identity command result. + The value will show 0 until Discover Identity command result becomes + available and a valid Product Type VDO is returned. + +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo2 +Date: October 2020 +Contact: Prashant Malani <pmalani@chromium.org> +Description: + 2nd Product Type VDO of Discover Identity command result. + The value will show 0 until Discover Identity command result becomes + available and a valid Product Type VDO is returned. + +What: /sys/class/typec/<port>-{partner|cable}/identity/product_type_vdo3 +Date: October 2020 +Contact: Prashant Malani <pmalani@chromium.org> +Description: + 3rd Product Type VDO of Discover Identity command result. + The value will show 0 until Discover Identity command result becomes + available and a valid Product Type VDO is returned. + + +USB Type-C port alternate mode devices. + +What: /sys/class/typec/<port>/<alt mode>/supported_roles +Date: April 2017 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Space separated list of the supported roles. + + Valid values: source, sink diff --git a/Documentation/ABI/testing/sysfs-class-usb_power_delivery b/Documentation/ABI/testing/sysfs-class-usb_power_delivery new file mode 100644 index 000000000..ce2b1b563 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-usb_power_delivery @@ -0,0 +1,240 @@ +What: /sys/class/usb_power_delivery +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Directory for USB Power Delivery devices. + +What: /sys/class/usb_power_delivery/.../revision +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + File showing the USB Power Delivery Specification Revision used + in communication. + +What: /sys/class/usb_power_delivery/.../version +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This is an optional attribute file showing the version of the + specific revision of the USB Power Delivery Specification. In + most cases the specification version is not known and the file + is not available. + +What: /sys/class/usb_power_delivery/.../source-capabilities +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The source capabilities message "Source_Capabilities" contains a + set of Power Data Objects (PDO), each representing a type of + power supply. The order of the PDO objects is defined in the USB + Power Delivery Specification. Each PDO - power supply - will + have its own device, and the PDO device name will start with the + object position number as the first character followed by the + power supply type name (":" as delimiter). + + /sys/class/usb_power_delivery/.../source_capabilities/<position>:<type> + +What: /sys/class/usb_power_delivery/.../sink-capabilities +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The sink capability message "Sink_Capabilities" contains a set + of Power Data Objects (PDO) just like with source capabilities, + but instead of describing the power capabilities, these objects + describe the power requirements. + + The order of the objects in the sink capability message is the + same as with the source capabilities message. + +Fixed Supplies + +What: /sys/class/usb_power_delivery/.../<capability>/<position>:fixed_supply +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Devices containing the attributes (the bit fields) defined for + Fixed Supplies. + + The device "1:fixed_supply" is special. USB Power Delivery + Specification dictates that the first PDO (at object position + 1), and the only mandatory PDO, is always the vSafe5V Fixed + Supply Object. vSafe5V Object has additional fields defined for + it that the other Fixed Supply Objects do not have and that are + related to the USB capabilities rather than power capabilities. + +What: /sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/dual_role_power +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This file contains boolean value that tells does the device + support both source and sink power roles. + +What: /sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/usb_suspend_supported +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This file shows the value of the USB Suspend Supported bit in + vSafe5V Fixed Supply Object. If the bit is set then the device + will follow the USB 2.0 and USB 3.2 rules for suspend and + resume. + +What: /sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/unconstrained_power +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This file shows the value of the Unconstrained Power bit in + vSafe5V Fixed Supply Object. The bit is set when an external + source of power, powerful enough to power the entire system on + its own, is available for the device. + +What: /sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/usb_communication_capable +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This file shows the value of the USB Communication Capable bit in + vSafe5V Fixed Supply Object. + +What: /sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/dual_role_data +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This file shows the value of the Dual-Role Data bit in vSafe5V + Fixed Supply Object. Dual role data means ability act as both + USB host and USB device. + +What: /sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/unchunked_extended_messages_supported +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This file shows the value of the Unchunked Extended Messages + Supported bit in vSafe5V Fixed Supply Object. + +What: /sys/class/usb_power_delivery/.../<capability>/<position>:fixed_supply/voltage +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The voltage the supply supports in millivolts. + +What: /sys/class/usb_power_delivery/.../source-capabilities/<position>:fixed_supply/maximum_current +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Maximum current of the fixed source supply in milliamperes. + +What: /sys/class/usb_power_delivery/.../sink-capabilities/<position>:fixed_supply/operational_current +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Operational current of the sink in milliamperes. + +What: /sys/class/usb_power_delivery/.../sink-capabilities/<position>:fixed_supply/fast_role_swap_current +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + This file contains the value of the "Fast Role Swap USB Type-C + Current" field that tells the current level the sink requires + after a Fast Role Swap. + 0 - Fast Swap not supported" + 1 - Default USB Power" + 2 - 1.5A@5V" + 3 - 3.0A@5V" + +Variable Supplies + +What: /sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Variable Power Supply PDO. + +What: /sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply/maximum_voltage +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Maximum Voltage in millivolts. + +What: /sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply/minimum_voltage +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Minimum Voltage in millivolts. + +What: /sys/class/usb_power_delivery/.../source-capabilities/<position>:variable_supply/maximum_current +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The maximum current in milliamperes that the source can supply + at the given Voltage range. + +What: /sys/class/usb_power_delivery/.../sink-capabilities/<position>:variable_supply/operational_current +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The operational current in milliamperes that the sink requires + at the given Voltage range. + +Battery Supplies + +What: /sys/class/usb_power_delivery/.../<capability>/<position>:battery +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Battery PDO. + +What: /sys/class/usb_power_delivery/.../<capability>/<position>:battery/maximum_voltage +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Maximum Voltage in millivolts. + +What: /sys/class/usb_power_delivery/.../<capability>/<position>:battery/minimum_voltage +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Minimum Voltage in millivolts. + +What: /sys/class/usb_power_delivery/.../source-capabilities/<position>:battery/maximum_power +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Maximum allowable Power in milliwatts. + +What: /sys/class/usb_power_delivery/.../sink-capabilities/<position>:battery/operational_power +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The operational power that the sink requires at the given + voltage range. + +Standard Power Range (SPR) Programmable Power Supplies + +What: /sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Programmable Power Supply (PPS) Augmented PDO (APDO). + +What: /sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/maximum_voltage +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Maximum Voltage in millivolts. + +What: /sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/minimum_voltage +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Minimum Voltage in millivolts. + +What: /sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/maximum_current +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Maximum Current in milliamperes. + +What: /sys/class/usb_power_delivery/.../source-capabilities/<position>:programmable_supply/pps_power_limited +Date: May 2022 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The PPS Power Limited bit indicates whether or not the source + supply will exceed the rated output power if requested. diff --git a/Documentation/ABI/testing/sysfs-class-usb_role b/Documentation/ABI/testing/sysfs-class-usb_role new file mode 100644 index 000000000..3b810a425 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-usb_role @@ -0,0 +1,21 @@ +What: /sys/class/usb_role/ +Date: Jan 2018 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Place in sysfs for USB Role Switches. USB Role Switch is a + device that can select the data role (host or device) for USB + port. + +What: /sys/class/usb_role/<switch>/role +Date: Jan 2018 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + The current role of the switch. This attribute can be used for + requesting role swapping with non-USB Type-C ports. With USB + Type-C ports, the ABI defined for USB Type-C connector class + must be used. + + Valid values: + - none + - host + - device diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc b/Documentation/ABI/testing/sysfs-class-uwb_rc new file mode 100644 index 000000000..a7ea169dc --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-uwb_rc @@ -0,0 +1,156 @@ +What: /sys/class/uwb_rc +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Interfaces for WiMedia Ultra Wideband Common Radio + Platform (UWB) radio controllers. + + Familiarity with the ECMA-368 'High Rate Ultra + Wideband MAC and PHY Specification' is assumed. + +What: /sys/class/uwb_rc/beacon_timeout_ms +Date: July 2008 +KernelVersion: 2.6.27 +Description: + If no beacons are received from a device for at least + this time, the device will be considered to have gone + and it will be removed. The default is 3 superframes + (~197 ms) as required by the specification. + +What: /sys/class/uwb_rc/uwb<N>/ +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + An individual UWB radio controller. + +What: /sys/class/uwb_rc/uwb<N>/beacon +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Write: + + <channel> + + to force a specific channel to be used when beaconing, + or, if <channel> is -1, to prohibit beaconing. If + <channel> is 0, then the default channel selection + algorithm will be used. Valid channels depends on the + radio controller's supported band groups. + + Reading returns the currently active channel, or -1 if + the radio controller is not beaconing. + +What: /sys/class/uwb_rc/uwb<N>/ASIE +Date: August 2014 +KernelVersion: 3.18 +Contact: linux-usb@vger.kernel.org +Description: + + The application-specific information element (ASIE) + included in this device's beacon, in space separated + hex octets. + + Reading returns the current ASIE. Writing replaces + the current ASIE with the one written. + +What: /sys/class/uwb_rc/uwb<N>/scan +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Write: + + <channel> <type> [<bpst offset>] + + to start (or stop) scanning on a channel. <type> is one of: + + == ======================================= + 0 scan + 1 scan outside BP + 2 scan while inactive + 3 scanning disabled + 4 scan (with start time of <bpst offset>) + == ======================================= + +What: /sys/class/uwb_rc/uwb<N>/mac_address +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + The EUI-48, in colon-separated hex octets, for this + radio controller. A write will change the radio + controller's EUI-48 but only do so while the device is + not beaconing or scanning. + +What: /sys/class/uwb_rc/uwb<N>/wusbhc +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + A symlink to the device (if any) of the WUSB Host + Controller PAL using this radio controller. + +What: /sys/class/uwb_rc/uwb<N>/<EUI-48>/ +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + A neighbour UWB device that has either been detected + as part of a scan or is a member of the radio + controllers beacon group. + +What: /sys/class/uwb_rc/uwb<N>/<EUI-48>/BPST +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + The time (using the radio controllers internal 1 ms + interval superframe timer) of the last beacon from + this device was received. + +What: /sys/class/uwb_rc/uwb<N>/<EUI-48>/DevAddr +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + The current DevAddr of this device in colon separated + hex octets. + +What: /sys/class/uwb_rc/uwb<N>/<EUI-48>/EUI_48 +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + + The EUI-48 of this device in colon separated hex + octets. + +What: /sys/class/uwb_rc/uwb<N>/<EUI-48>/IEs +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + The latest IEs included in this device's beacon, in + space separated hex octets with one IE per line. + +What: /sys/class/uwb_rc/uwb<N>/<EUI-48>/LQE +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Link Quality Estimate - the Signal to Noise Ratio + (SNR) of all packets received from this device in dB. + This gives an estimate on a suitable PHY rate. Refer + to [ECMA-368] section 13.3 for more details. + +What: /sys/class/uwb_rc/uwb<N>/<EUI-48>/RSSI +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Received Signal Strength Indication - the strength of + the received signal in dB. LQE is a more useful + measure of the radio link quality. diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc new file mode 100644 index 000000000..55eb55cac --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc @@ -0,0 +1,57 @@ +What: /sys/class/uwb_rc/uwb<N>/wusbhc/wusb_chid +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + Write the CHID (16 space-separated hex octets) for this host controller. + This starts the host controller, allowing it to accept connection from + WUSB devices. + + Set an all zero CHID to stop the host controller. + +What: /sys/class/uwb_rc/uwb<N>/wusbhc/wusb_trust_timeout +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + Devices that haven't sent a WUSB packet to the host + within 'wusb_trust_timeout' ms are considered to have + disconnected and are removed. The default value of + 4000 ms is the value required by the WUSB + specification. + + Since this relates to security (specifically, the + lifetime of PTKs and GTKs) it should not be changed + from the default. + +What: /sys/class/uwb_rc/uwb<N>/wusbhc/wusb_phy_rate +Date: August 2009 +KernelVersion: 2.6.32 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The maximum PHY rate to use for all connected devices. + This is only of limited use for testing and + development as the hardware's automatic rate + adaptation is better then this simple control. + + Refer to [ECMA-368] section 10.3.1.1 for the value to + use. + +What: /sys/class/uwb_rc/uwb<N>/wusbhc/wusb_dnts +Date: June 2013 +KernelVersion: 3.11 +Contact: Thomas Pugliese <thomas.pugliese@gmail.com> +Description: + The device notification time slot (DNTS) count and inverval in + milliseconds that the WUSB host should use. This controls how + often the devices will have the opportunity to send + notifications to the host. + +What: /sys/class/uwb_rc/uwb<N>/wusbhc/wusb_retry_count +Date: June 2013 +KernelVersion: 3.11 +Contact: Thomas Pugliese <thomas.pugliese@gmail.com> +Description: + The number of retries that the WUSB host should attempt + before reporting an error for a bus transaction. The range of + valid values is [0..15], where 0 indicates infinite retries. diff --git a/Documentation/ABI/testing/sysfs-class-vduse b/Documentation/ABI/testing/sysfs-class-vduse new file mode 100644 index 000000000..2f2bc5c8f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-vduse @@ -0,0 +1,33 @@ +What: /sys/class/vduse/ +Date: Oct 2021 +KernelVersion: 5.15 +Contact: Yongji Xie <xieyongji@bytedance.com> +Description: + The vduse/ class sub-directory belongs to the VDUSE + framework and provides a sysfs interface for configuring + VDUSE devices. + +What: /sys/class/vduse/control/ +Date: Oct 2021 +KernelVersion: 5.15 +Contact: Yongji Xie <xieyongji@bytedance.com> +Description: + This directory entry is created for the control device + of VDUSE framework. + +What: /sys/class/vduse/<device-name>/ +Date: Oct 2021 +KernelVersion: 5.15 +Contact: Yongji Xie <xieyongji@bytedance.com> +Description: + This directory entry is created when a VDUSE device is + created via the control device. + +What: /sys/class/vduse/<device-name>/msg_timeout +Date: Oct 2021 +KernelVersion: 5.15 +Contact: Yongji Xie <xieyongji@bytedance.com> +Description: + (RW) The timeout (in seconds) for waiting for the control + message's response from userspace. Default value is 30s. + Writing a '0' to the file means to disable the timeout. diff --git a/Documentation/ABI/testing/sysfs-class-wakeup b/Documentation/ABI/testing/sysfs-class-wakeup new file mode 100644 index 000000000..754aab8b6 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-wakeup @@ -0,0 +1,76 @@ +What: /sys/class/wakeup/ +Date: June 2019 +Contact: Tri Vo <trong@android.com> +Description: + The /sys/class/wakeup/ directory contains pointers to all + wakeup sources in the kernel at that moment in time. + +What: /sys/class/wakeup/.../name +Date: June 2019 +Contact: Tri Vo <trong@android.com> +Description: + This file contains the name of the wakeup source. + +What: /sys/class/wakeup/.../active_count +Date: June 2019 +Contact: Tri Vo <trong@android.com> +Description: + This file contains the number of times the wakeup source was + activated. + +What: /sys/class/wakeup/.../event_count +Date: June 2019 +Contact: Tri Vo <trong@android.com> +Description: + This file contains the number of signaled wakeup events + associated with the wakeup source. + +What: /sys/class/wakeup/.../wakeup_count +Date: June 2019 +Contact: Tri Vo <trong@android.com> +Description: + This file contains the number of times the wakeup source might + abort suspend. + +What: /sys/class/wakeup/.../expire_count +Date: June 2019 +Contact: Tri Vo <trong@android.com> +Description: + This file contains the number of times the wakeup source's + timeout has expired. + +What: /sys/class/wakeup/.../active_time_ms +Date: June 2019 +Contact: Tri Vo <trong@android.com> +Description: + This file contains the amount of time the wakeup source has + been continuously active, in milliseconds. If the wakeup + source is not active, this file contains '0'. + +What: /sys/class/wakeup/.../total_time_ms +Date: June 2019 +Contact: Tri Vo <trong@android.com> +Description: + This file contains the total amount of time this wakeup source + has been active, in milliseconds. + +What: /sys/class/wakeup/.../max_time_ms +Date: June 2019 +Contact: Tri Vo <trong@android.com> +Description: + This file contains the maximum amount of time this wakeup + source has been continuously active, in milliseconds. + +What: /sys/class/wakeup/.../last_change_ms +Date: June 2019 +Contact: Tri Vo <trong@android.com> +Description: + This file contains the monotonic clock time when the wakeup + source was touched last time, in milliseconds. + +What: /sys/class/wakeup/.../prevent_suspend_time_ms +Date: June 2019 +Contact: Tri Vo <trong@android.com> +Description: + The file contains the total amount of time this wakeup source + has been preventing autosleep, in milliseconds. diff --git a/Documentation/ABI/testing/sysfs-class-watchdog b/Documentation/ABI/testing/sysfs-class-watchdog new file mode 100644 index 000000000..585caecda --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-watchdog @@ -0,0 +1,116 @@ +What: /sys/class/watchdog/watchdogn/bootstatus +Date: August 2015 +Contact: Wim Van Sebroeck <wim@iguana.be> +Description: + It is a read only file. It contains status of the watchdog + device at boot. It is equivalent to WDIOC_GETBOOTSTATUS of + ioctl interface. + +What: /sys/class/watchdog/watchdogn/identity +Date: August 2015 +Contact: Wim Van Sebroeck <wim@iguana.be> +Description: + It is a read only file. It contains identity string of + watchdog device. + +What: /sys/class/watchdog/watchdogn/nowayout +Date: August 2015 +Contact: Wim Van Sebroeck <wim@iguana.be> +Description: + It is a read/write file. While reading, it gives '1' + if the device has the nowayout feature set, otherwise + it gives '0'. Writing a '1' to the file enables the + nowayout feature. Once set, the nowayout feature + cannot be disabled, so writing a '0' either has no + effect (if the feature was already disabled) or + results in a permission error. + +What: /sys/class/watchdog/watchdogn/state +Date: August 2015 +Contact: Wim Van Sebroeck <wim@iguana.be> +Description: + It is a read only file. It gives active/inactive status of + watchdog device. + +What: /sys/class/watchdog/watchdogn/status +Date: August 2015 +Contact: Wim Van Sebroeck <wim@iguana.be> +Description: + It is a read only file. It contains watchdog device's + internal status bits. It is equivalent to WDIOC_GETSTATUS + of ioctl interface. + +What: /sys/class/watchdog/watchdogn/timeleft +Date: August 2015 +Contact: Wim Van Sebroeck <wim@iguana.be> +Description: + It is a read only file. It contains value of time left for + reset generation. It is equivalent to WDIOC_GETTIMELEFT of + ioctl interface. + +What: /sys/class/watchdog/watchdogn/timeout +Date: August 2015 +Contact: Wim Van Sebroeck <wim@iguana.be> +Description: + It is a read only file. It is read to know about current + value of timeout programmed. + +What: /sys/class/watchdog/watchdogn/pretimeout +Date: December 2016 +Contact: Wim Van Sebroeck <wim@iguana.be> +Description: + It is a read only file. It specifies the time in seconds before + timeout when the pretimeout interrupt is delivered. Pretimeout + is an optional feature. + +What: /sys/class/watchdog/watchdogn/pretimeout_avaialable_governors +Date: February 2017 +Contact: Wim Van Sebroeck <wim@iguana.be> +Description: + It is a read only file. It shows the pretimeout governors + available for this watchdog. + +What: /sys/class/watchdog/watchdogn/pretimeout_governor +Date: February 2017 +Contact: Wim Van Sebroeck <wim@iguana.be> +Description: + It is a read/write file. When read, the currently assigned + pretimeout governor is returned. When written, it sets + the pretimeout governor. + +What: /sys/class/watchdog/watchdog1/access_cs0 +Date: August 2019 +Contact: Ivan Mikhaylov <i.mikhaylov@yadro.com>, + Alexander Amelkin <a.amelkin@yadro.com> +Description: + It is a read/write file. This attribute exists only if the + system has booted from the alternate flash chip due to + expiration of a watchdog timer of AST2400/AST2500 when + alternate boot function was enabled with 'aspeed,alt-boot' + devicetree option for that watchdog or with an appropriate + h/w strapping (for WDT2 only). + + At alternate flash the 'access_cs0' sysfs node provides: + + ast2400: + a way to get access to the primary SPI flash + chip at CS0 after booting from the alternate + chip at CS1. + ast2500: + a way to restore the normal address mapping + from (CS0->CS1, CS1->CS0) to (CS0->CS0, + CS1->CS1). + + Clearing the boot code selection and timeout counter also + resets to the initial state the chip select line mapping. When + the SoC is in normal mapping state (i.e. booted from CS0), + clearing those bits does nothing for both versions of the SoC. + For alternate boot mode (booted from CS1 due to wdt2 + expiration) the behavior differs as described above. + + This option can be used with wdt2 (watchdog1) only. + + When read, the current status of the boot code selection is + shown. When written with any non-zero value, it clears + the boot code selection and the timeout counter, which results + in chipselect reset for AST2400/AST2500. diff --git a/Documentation/ABI/testing/sysfs-class-zram b/Documentation/ABI/testing/sysfs-class-zram new file mode 100644 index 000000000..48ddacbe0 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-zram @@ -0,0 +1,24 @@ +What: /sys/class/zram-control/ +Date: August 2015 +KernelVersion: 4.2 +Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> +Description: + The zram-control/ class sub-directory belongs to zram + device class + +What: /sys/class/zram-control/hot_add +Date: August 2015 +KernelVersion: 4.2 +Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> +Description: + RO attribute. Read operation will cause zram to add a new + device and return its device id back to user (so one can + use /dev/zram<id>), or error code. + +What: /sys/class/zram-control/hot_remove +Date: August 2015 +KernelVersion: 4.2 +Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> +Description: + WO attribute. Remove a specific /dev/zramX device, where X + is a device_id provided by user. |