diff options
Diffstat (limited to 'Documentation/devicetree/bindings/firmware/arm,scmi.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/firmware/arm,scmi.yaml | 432 |
1 files changed, 432 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml new file mode 100644 index 000000000..1c0388da6 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -0,0 +1,432 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2021 ARM Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/arm,scmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: System Control and Management Interface (SCMI) Message Protocol bindings + +maintainers: + - Sudeep Holla <sudeep.holla@arm.com> + +description: | + The SCMI is intended to allow agents such as OSPM to manage various functions + that are provided by the hardware platform it is running on, including power + and performance functions. + + This binding is intended to define the interface the firmware implementing + the SCMI as described in ARM document number ARM DEN 0056 ("ARM System Control + and Management Interface Platform Design Document")[0] provide for OSPM in + the device tree. + + [0] https://developer.arm.com/documentation/den0056/latest + +properties: + $nodename: + const: scmi + + compatible: + oneOf: + - description: SCMI compliant firmware with mailbox transport + items: + - const: arm,scmi + - description: SCMI compliant firmware with ARM SMC/HVC transport + items: + - const: arm,scmi-smc + - description: SCMI compliant firmware with SCMI Virtio transport. + The virtio transport only supports a single device. + items: + - const: arm,scmi-virtio + - description: SCMI compliant firmware with OP-TEE transport + items: + - const: linaro,scmi-optee + + interrupts: + description: + The interrupt that indicates message completion by the platform + rather than by the return of the smc call. This should not be used + except when the platform requires such behavior. + maxItems: 1 + + interrupt-names: + const: a2p + + mbox-names: + description: + Specifies the mailboxes used to communicate with SCMI compliant + firmware. + items: + - const: tx + - const: rx + + mboxes: + description: + List of phandle and mailbox channel specifiers. It should contain + exactly one or two mailboxes, one for transmitting messages("tx") + and another optional for receiving the notifications("rx") if supported. + minItems: 1 + maxItems: 2 + + shmem: + description: + List of phandle pointing to the shared memory(SHM) area, for each + transport channel specified. + minItems: 1 + maxItems: 2 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + atomic-threshold-us: + description: + An optional time value, expressed in microseconds, representing, on this + platform, the threshold above which any SCMI command, advertised to have + an higher-than-threshold execution latency, should not be considered for + atomic mode of operation, even if requested. + default: 0 + + arm,smc-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + SMC id required when using smc or hvc transports + + linaro,optee-channel-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Channel specifier required when using OP-TEE transport. + + protocol@11: + type: object + properties: + reg: + const: 0x11 + + '#power-domain-cells': + const: 1 + + required: + - '#power-domain-cells' + + protocol@13: + type: object + properties: + reg: + const: 0x13 + + '#clock-cells': + const: 1 + + required: + - '#clock-cells' + + protocol@14: + type: object + properties: + reg: + const: 0x14 + + '#clock-cells': + const: 1 + + required: + - '#clock-cells' + + protocol@15: + type: object + properties: + reg: + const: 0x15 + + '#thermal-sensor-cells': + const: 1 + + required: + - '#thermal-sensor-cells' + + protocol@16: + type: object + properties: + reg: + const: 0x16 + + '#reset-cells': + const: 1 + + required: + - '#reset-cells' + + protocol@17: + type: object + properties: + reg: + const: 0x17 + + regulators: + type: object + description: + The list of all regulators provided by this SCMI controller. + + patternProperties: + '^regulators@[0-9a-f]+$': + type: object + $ref: "../regulator/regulator.yaml#" + + properties: + reg: + maxItems: 1 + description: Identifier for the voltage regulator. + + required: + - reg + + protocol@18: + type: object + properties: + reg: + const: 0x18 + +additionalProperties: false + +patternProperties: + '^protocol@[0-9a-f]+$': + type: object + description: + Each sub-node represents a protocol supported. If the platform + supports a dedicated communication channel for a particular protocol, + then the corresponding transport properties must be present. + The virtio transport does not support a dedicated communication channel. + + properties: + reg: + maxItems: 1 + + mbox-names: + items: + - const: tx + - const: rx + + mboxes: + minItems: 1 + maxItems: 2 + + shmem: + minItems: 1 + maxItems: 2 + + linaro,optee-channel-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Channel specifier required when using OP-TEE transport and + protocol has a dedicated communication channel. + + required: + - reg + +required: + - compatible + +if: + properties: + compatible: + contains: + const: arm,scmi +then: + properties: + interrupts: false + interrupt-names: false + + required: + - mboxes + - shmem + +else: + if: + properties: + compatible: + contains: + const: arm,scmi-smc + then: + required: + - arm,smc-id + - shmem + + else: + if: + properties: + compatible: + contains: + const: linaro,scmi-optee + then: + required: + - linaro,optee-channel-id + +examples: + - | + firmware { + scmi { + compatible = "arm,scmi"; + mboxes = <&mhuB 0 0>, + <&mhuB 0 1>; + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_lpri0>, + <&cpu_scp_lpri1>; + + #address-cells = <1>; + #size-cells = <0>; + + atomic-threshold-us = <10000>; + + scmi_devpd: protocol@11 { + reg = <0x11>; + #power-domain-cells = <1>; + }; + + scmi_dvfs: protocol@13 { + reg = <0x13>; + #clock-cells = <1>; + + mboxes = <&mhuB 1 0>, + <&mhuB 1 1>; + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_hpri0>, + <&cpu_scp_hpri1>; + }; + + scmi_clk: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + + scmi_sensors: protocol@15 { + reg = <0x15>; + #thermal-sensor-cells = <1>; + }; + + scmi_reset: protocol@16 { + reg = <0x16>; + #reset-cells = <1>; + }; + + scmi_voltage: protocol@17 { + reg = <0x17>; + regulators { + #address-cells = <1>; + #size-cells = <0>; + + regulator_devX: regulator@0 { + reg = <0x0>; + regulator-max-microvolt = <3300000>; + }; + + regulator_devY: regulator@9 { + reg = <0x9>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <4200000>; + }; + }; + }; + + scmi_powercap: protocol@18 { + reg = <0x18>; + }; + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + + sram@50000000 { + compatible = "mmio-sram"; + reg = <0x0 0x50000000 0x0 0x10000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x50000000 0x10000>; + + cpu_scp_lpri0: scp-sram-section@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x80>; + }; + + cpu_scp_lpri1: scp-sram-section@80 { + compatible = "arm,scmi-shmem"; + reg = <0x80 0x80>; + }; + + cpu_scp_hpri0: scp-sram-section@100 { + compatible = "arm,scmi-shmem"; + reg = <0x100 0x80>; + }; + + cpu_scp_hpri2: scp-sram-section@180 { + compatible = "arm,scmi-shmem"; + reg = <0x180 0x80>; + }; + }; + }; + + - | + firmware { + scmi { + compatible = "arm,scmi-smc"; + shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>; + arm,smc-id = <0xc3000001>; + + #address-cells = <1>; + #size-cells = <0>; + + scmi_devpd1: protocol@11 { + reg = <0x11>; + #power-domain-cells = <1>; + }; + }; + }; + + - | + firmware { + scmi { + compatible = "linaro,scmi-optee"; + linaro,optee-channel-id = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + scmi_dvfs1: protocol@13 { + reg = <0x13>; + linaro,optee-channel-id = <1>; + shmem = <&cpu_optee_lpri0>; + #clock-cells = <1>; + }; + + scmi_clk0: protocol@14 { + reg = <0x14>; + #clock-cells = <1>; + }; + }; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + + sram@51000000 { + compatible = "mmio-sram"; + reg = <0x0 0x51000000 0x0 0x10000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x51000000 0x10000>; + + cpu_optee_lpri0: optee-sram-section@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x80>; + }; + }; + }; + +... |