diff options
Diffstat (limited to 'Documentation/devicetree/bindings/interconnect')
13 files changed, 1575 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml new file mode 100644 index 000000000..f7a5e31c5 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/fsl,imx8m-noc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic i.MX bus frequency device + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +description: | + The i.MX SoC family has multiple buses for which clock frequency (and + sometimes voltage) can be adjusted. + + Some of those buses expose register areas mentioned in the memory maps as GPV + ("Global Programmers View") but not all. Access to this area might be denied + for normal (non-secure) world. + + The buses are based on externally licensed IPs such as ARM NIC-301 and + Arteris FlexNOC but DT bindings are specific to the integration of these bus + interconnect IPs into imx SOCs. + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx8mm-nic + - fsl,imx8mn-nic + - fsl,imx8mp-nic + - fsl,imx8mq-nic + - const: fsl,imx8m-nic + - items: + - enum: + - fsl,imx8mm-noc + - fsl,imx8mn-noc + - fsl,imx8mp-noc + - fsl,imx8mq-noc + - const: fsl,imx8m-noc + - const: fsl,imx8m-nic + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + operating-points-v2: true + opp-table: + type: object + + fsl,ddrc: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: + Phandle to DDR Controller. + + '#interconnect-cells': + description: + If specified then also act as an interconnect provider. Should only be + set once per soc on the main noc. + const: 1 + +required: + - compatible + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/interconnect/imx8mm.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + noc: interconnect@32700000 { + compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc"; + reg = <0x32700000 0x100000>; + clocks = <&clk IMX8MM_CLK_NOC>; + #interconnect-cells = <1>; + fsl,ddrc = <&ddrc>; + + operating-points-v2 = <&noc_opp_table>; + noc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-133333333 { + opp-hz = /bits/ 64 <133333333>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + }; + }; + }; + + ddrc: memory-controller@3d400000 { + compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc"; + reg = <0x3d400000 0x400000>; + clock-names = "core", "pll", "alt", "apb"; + clocks = <&clk IMX8MM_CLK_DRAM_CORE>, + <&clk IMX8MM_DRAM_PLL>, + <&clk IMX8MM_CLK_DRAM_ALT>, + <&clk IMX8MM_CLK_DRAM_APB>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt new file mode 100644 index 000000000..138c544c8 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt @@ -0,0 +1,86 @@ +Interconnect Provider Device Tree Bindings +========================================= + +The purpose of this document is to define a common set of generic interconnect +providers/consumers properties. + + += interconnect providers = + +The interconnect provider binding is intended to represent the interconnect +controllers in the system. Each provider registers a set of interconnect +nodes, which expose the interconnect related capabilities of the interconnect +to consumer drivers. These capabilities can be throughput, latency, priority +etc. The consumer drivers set constraints on interconnect path (or endpoints) +depending on the use case. Interconnect providers can also be interconnect +consumers, such as in the case where two network-on-chip fabrics interface +directly. + +Required properties: +- compatible : contains the interconnect provider compatible string +- #interconnect-cells : number of cells in a interconnect specifier needed to + encode the interconnect node id and optionally add a + path tag + +Example: + + snoc: interconnect@580000 { + compatible = "qcom,msm8916-snoc"; + #interconnect-cells = <1>; + reg = <0x580000 0x14000>; + clock-names = "bus_clk", "bus_a_clk"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + + += interconnect consumers = + +The interconnect consumers are device nodes which dynamically express their +bandwidth requirements along interconnect paths they are connected to. There +can be multiple interconnect providers on a SoC and the consumer may consume +multiple paths from different providers depending on use case and the +components it has to interact with. + +Required properties: +interconnects : Pairs of phandles and interconnect provider specifier to denote + the edge source and destination ports of the interconnect path. + An optional path tag value could specified as additional argument + to both endpoints and in such cases, this information will be passed + to the interconnect framework to do aggregation based on the attached + tag. + +Optional properties: +interconnect-names : List of interconnect path name strings sorted in the same + order as the interconnects property. Consumers drivers will use + interconnect-names to match interconnect paths with interconnect + specifier pairs. + + Reserved interconnect names: + * dma-mem: Path from the device to the main memory of + the system + +Example: + + sdhci@7864000 { + ... + interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>; + interconnect-names = "sdhc-mem"; + }; + +Example with path tags: + + gnoc: interconnect@17900000 { + ... + interconnect-cells = <2>; + }; + + mnoc: interconnect@1380000 { + ... + interconnect-cells = <2>; + }; + + cpu@0 { + ... + interconnects = <&gnoc MASTER_APPSS_PROC 3 &mnoc SLAVE_EBI1 3>; + } diff --git a/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml new file mode 100644 index 000000000..58611ba2a --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/mediatek,cci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Cache Coherent Interconnect (CCI) frequency and voltage scaling + +maintainers: + - Jia-Wei Chang <jia-wei.chang@mediatek.com> + - Johnson Wang <johnson.wang@mediatek.com> + +description: | + MediaTek Cache Coherent Interconnect (CCI) is a hardware engine used by + MT8183 and MT8186 SoCs to scale the frequency and adjust the voltage in + hardware. It can also optimize the voltage to reduce the power consumption. + +properties: + compatible: + enum: + - mediatek,mt8183-cci + - mediatek,mt8186-cci + + clocks: + items: + - description: + The multiplexer for clock input of the bus. + - description: + A parent of "bus" clock which is used as an intermediate clock source + when the original clock source (PLL) is under transition and not + stable yet. + + clock-names: + items: + - const: cci + - const: intermediate + + operating-points-v2: true + opp-table: + type: object + + proc-supply: + description: + Phandle of the regulator for CCI that provides the supply voltage. + + sram-supply: + description: + Phandle of the regulator for sram of CCI that provides the supply + voltage. When it is present, the implementation needs to do + "voltage tracking" to step by step scale up/down Vproc and Vsram to fit + SoC specific needs. When absent, the voltage scaling flow is handled by + hardware, hence no software "voltage tracking" is needed. + +required: + - compatible + - clocks + - clock-names + - operating-points-v2 + - proc-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + cci: cci { + compatible = "mediatek,mt8183-cci"; + clocks = <&mcucfg CLK_MCU_BUS_SEL>, + <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>; + clock-names = "cci", "intermediate"; + operating-points-v2 = <&cci_opp>; + proc-supply = <&mt6358_vproc12_reg>; + }; + + cci_opp: opp-table-cci { + compatible = "operating-points-v2"; + opp-shared; + opp2_00: opp-273000000 { + opp-hz = /bits/ 64 <273000000>; + opp-microvolt = <650000>; + }; + opp2_01: opp-338000000 { + opp-hz = /bits/ 64 <338000000>; + opp-microvolt = <687500>; + }; + opp2_02: opp-403000000 { + opp-hz = /bits/ 64 <403000000>; + opp-microvolt = <718750>; + }; + opp2_03: opp-463000000 { + opp-hz = /bits/ 64 <463000000>; + opp-microvolt = <756250>; + }; + opp2_04: opp-546000000 { + opp-hz = /bits/ 64 <546000000>; + opp-microvolt = <800000>; + }; + opp2_05: opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-microvolt = <818750>; + }; + opp2_06: opp-689000000 { + opp-hz = /bits/ 64 <689000000>; + opp-microvolt = <850000>; + }; + opp2_07: opp-767000000 { + opp-hz = /bits/ 64 <767000000>; + opp-microvolt = <868750>; + }; + opp2_08: opp-845000000 { + opp-hz = /bits/ 64 <845000000>; + opp-microvolt = <893750>; + }; + opp2_09: opp-871000000 { + opp-hz = /bits/ 64 <871000000>; + opp-microvolt = <906250>; + }; + opp2_10: opp-923000000 { + opp-hz = /bits/ 64 <923000000>; + opp-microvolt = <931250>; + }; + opp2_11: opp-962000000 { + opp-hz = /bits/ 64 <962000000>; + opp-microvolt = <943750>; + }; + opp2_12: opp-1027000000 { + opp-hz = /bits/ 64 <1027000000>; + opp-microvolt = <975000>; + }; + opp2_13: opp-1092000000 { + opp-hz = /bits/ 64 <1092000000>; + opp-microvolt = <1000000>; + }; + opp2_14: opp-1144000000 { + opp-hz = /bits/ 64 <1144000000>; + opp-microvolt = <1025000>; + }; + opp2_15: opp-1196000000 { + opp-hz = /bits/ 64 <1196000000>; + opp-microvolt = <1050000>; + }; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml new file mode 100644 index 000000000..eec987640 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,bcm-voter.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm BCM-Voter Interconnect + +maintainers: + - Georgi Djakov <georgi.djakov@linaro.org> + +description: | + The Bus Clock Manager (BCM) is a dedicated hardware accelerator that manages + shared system resources by aggregating requests from multiple Resource State + Coordinators (RSC). Interconnect providers are able to vote for aggregated + thresholds values from consumers by communicating through their respective + RSCs. + +properties: + compatible: + enum: + - qcom,bcm-voter + + qcom,tcs-wait: + description: | + Optional mask of which TCSs (Triggered Command Sets) wait for completion + upon triggering. If not specified, then the AMC and WAKE sets wait for + completion. The mask bits are available in the QCOM_ICC_TAG_* defines. + + The AMC TCS is triggered immediately when icc_set_bw() is called. The + WAKE/SLEEP TCSs are triggered when the RSC transitions between active and + sleep modes. + + In most cases, it's necessary to wait in both the AMC and WAKE sets to + ensure resources are available before use. If a specific RSC and its use + cases can ensure sufficient delay by other means, then this can be + overridden to reduce latencies. + + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + +additionalProperties: false + +examples: + # Example 1: apps bcm_voter on SDM845 SoC should be defined inside &apps_rsc node + # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml + - | + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + # Example 2: disp bcm_voter on SDM845 should be defined inside &disp_rsc node + # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml + - | + + #include <dt-bindings/interconnect/qcom,icc.h> + + disp_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + qcom,tcs-wait = <QCOM_ICC_TAG_AMC>; + }; +... diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml new file mode 100644 index 000000000..8004c4baf --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,msm8974.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8974 Network-On-Chip Interconnect + +maintainers: + - Brian Masney <masneyb@onstation.org> + +description: | + The Qualcomm MSM8974 interconnect providers support setting system + bandwidth requirements between various network-on-chip fabrics. + +properties: + reg: + maxItems: 1 + + compatible: + enum: + - qcom,msm8974-bimc + - qcom,msm8974-cnoc + - qcom,msm8974-mmssnoc + - qcom,msm8974-ocmemnoc + - qcom,msm8974-pnoc + - qcom,msm8974-snoc + + '#interconnect-cells': + const: 1 + + clock-names: + items: + - const: bus + - const: bus_a + + clocks: + items: + - description: Bus Clock + - description: Bus A Clock + +required: + - compatible + - reg + - '#interconnect-cells' + - clock-names + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + + bimc: interconnect@fc380000 { + reg = <0xfc380000 0x6a000>; + compatible = "qcom,msm8974-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml new file mode 100644 index 000000000..be29e0b80 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,msm8998-bwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Interconnect Bandwidth Monitor + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: | + Bandwidth Monitor measures current throughput on buses between various NoC + fabrics and provides information when it crosses configured thresholds. + + Certain SoCs might have more than one Bandwidth Monitors, for example on SDM845:: + - Measuring the bandwidth between CPUs and Last Level Cache Controller - + called just BWMON, + - Measuring the bandwidth between Last Level Cache Controller and memory + (DDR) - called LLCC BWMON. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,sc7280-cpu-bwmon + - qcom,sdm845-bwmon + - const: qcom,msm8998-bwmon + - const: qcom,msm8998-bwmon # BWMON v4 + - const: qcom,sc7280-llcc-bwmon # BWMON v5 + - const: qcom,sdm845-llcc-bwmon # BWMON v5 + + interconnects: + maxItems: 1 + + interrupts: + maxItems: 1 + + operating-points-v2: true + opp-table: + type: object + + reg: + # BWMON v4 (currently described) and BWMON v5 use one register address + # space. BWMON v2 uses two register spaces - not yet described. + maxItems: 1 + +required: + - compatible + - interconnects + - interrupts + - operating-points-v2 + - opp-table + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interconnect/qcom,sdm845.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pmu@1436400 { + compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon"; + reg = <0x01436400 0x600>; + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-0 { + opp-peak-kBps = <4800000>; + }; + opp-1 { + opp-peak-kBps = <9216000>; + }; + opp-2 { + opp-peak-kBps = <15052800>; + }; + opp-3 { + opp-peak-kBps = <20889600>; + }; + opp-4 { + opp-peak-kBps = <25497600>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml new file mode 100644 index 000000000..bf538c0c5 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,osm-l3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Operating State Manager (OSM) L3 Interconnect Provider + +maintainers: + - Sibi Sankar <quic_sibis@quicinc.com> + +description: + L3 cache bandwidth requirements on Qualcomm SoCs is serviced by the OSM. + The OSM L3 interconnect provider aggregates the L3 bandwidth requests + from CPU/GPU and relays it to the OSM. + +properties: + compatible: + enum: + - qcom,sc7180-osm-l3 + - qcom,sc7280-epss-l3 + - qcom,sc8180x-osm-l3 + - qcom,sdm845-osm-l3 + - qcom,sm8150-osm-l3 + - qcom,sm8250-epss-l3 + + reg: + maxItems: 1 + + clocks: + items: + - description: xo clock + - description: alternate clock + + clock-names: + items: + - const: xo + - const: alternate + + '#interconnect-cells': + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - '#interconnect-cells' + +additionalProperties: false + +examples: + - | + + #define GPLL0 165 + #define RPMH_CXO_CLK 0 + + osm_l3: interconnect@17d41000 { + compatible = "qcom,sdm845-osm-l3"; + reg = <0x17d41000 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml new file mode 100644 index 000000000..f65a2fe84 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,qcm2290.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QCM2290 Network-On-Chip interconnect + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +description: | + The Qualcomm QCM2290 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. + +properties: + reg: + maxItems: 1 + + compatible: + enum: + - qcom,qcm2290-bimc + - qcom,qcm2290-cnoc + - qcom,qcm2290-snoc + + '#interconnect-cells': + const: 1 + + clock-names: + items: + - const: bus + - const: bus_a + + clocks: + items: + - description: Bus Clock + - description: Bus A Clock + +# Child node's properties +patternProperties: + '^interconnect-[a-z0-9]+$': + type: object + description: + The interconnect providers do not have a separate QoS register space, + but share parent's space. + + properties: + compatible: + enum: + - qcom,qcm2290-qup-virt + - qcom,qcm2290-mmrt-virt + - qcom,qcm2290-mmnrt-virt + + '#interconnect-cells': + const: 1 + + clock-names: + items: + - const: bus + - const: bus_a + + clocks: + items: + - description: Bus Clock + - description: Bus A Clock + + required: + - compatible + - '#interconnect-cells' + - clock-names + - clocks + + additionalProperties: false + +required: + - compatible + - reg + - '#interconnect-cells' + - clock-names + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + + snoc: interconnect@1880000 { + compatible = "qcom,qcm2290-snoc"; + reg = <0x01880000 0x60200>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + + qup_virt: interconnect-qup { + compatible = "qcom,qcm2290-qup-virt"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_QUP_CLK>, + <&rpmcc RPM_SMD_QUP_A_CLK>; + }; + + mmnrt_virt: interconnect-mmnrt { + compatible = "qcom,qcm2290-mmnrt-virt"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_MMNRT_CLK>, + <&rpmcc RPM_SMD_MMNRT_A_CLK>; + }; + + mmrt_virt: interconnect-mmrt { + compatible = "qcom,qcm2290-mmrt-virt"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_MMRT_CLK>, + <&rpmcc RPM_SMD_MMRT_A_CLK>; + }; + }; + + cnoc: interconnect@1900000 { + compatible = "qcom,qcm2290-cnoc"; + reg = <0x01900000 0x8200>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_CNOC_CLK>, + <&rpmcc RPM_SMD_CNOC_A_CLK>; + }; + + bimc: interconnect@4480000 { + compatible = "qcom,qcm2290-bimc"; + reg = <0x04480000 0x80000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml new file mode 100644 index 000000000..4b37aa88a --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml @@ -0,0 +1,247 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,rpm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPM Network-On-Chip Interconnect + +maintainers: + - Georgi Djakov <georgi.djakov@linaro.org> + +description: | + RPM interconnect providers support system bandwidth requirements through + RPM processor. The provider is able to communicate with the RPM through + the RPM shared memory device. + +properties: + reg: + maxItems: 1 + + compatible: + enum: + - qcom,msm8916-bimc + - qcom,msm8916-pcnoc + - qcom,msm8916-snoc + - qcom,msm8939-bimc + - qcom,msm8939-pcnoc + - qcom,msm8939-snoc + - qcom,msm8996-a0noc + - qcom,msm8996-a1noc + - qcom,msm8996-a2noc + - qcom,msm8996-bimc + - qcom,msm8996-cnoc + - qcom,msm8996-mnoc + - qcom,msm8996-pnoc + - qcom,msm8996-snoc + - qcom,qcs404-bimc + - qcom,qcs404-pcnoc + - qcom,qcs404-snoc + - qcom,sdm660-a2noc + - qcom,sdm660-bimc + - qcom,sdm660-cnoc + - qcom,sdm660-gnoc + - qcom,sdm660-mnoc + - qcom,sdm660-snoc + + '#interconnect-cells': + description: | + Value: <1> is one cell in an interconnect specifier for the + interconnect node id, <2> requires the interconnect node id and an + extra path tag. + enum: [ 1, 2 ] + + clocks: + minItems: 2 + maxItems: 7 + + clock-names: + minItems: 2 + maxItems: 7 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - '#interconnect-cells' + - clock-names + - clocks + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8916-bimc + - qcom,msm8916-pcnoc + - qcom,msm8916-snoc + - qcom,msm8939-bimc + - qcom,msm8939-pcnoc + - qcom,msm8939-snoc + - qcom,msm8996-a1noc + - qcom,msm8996-a2noc + - qcom,msm8996-bimc + - qcom,msm8996-cnoc + - qcom,msm8996-pnoc + - qcom,msm8996-snoc + - qcom,qcs404-bimc + - qcom,qcs404-pcnoc + - qcom,qcs404-snoc + - qcom,sdm660-bimc + - qcom,sdm660-cnoc + - qcom,sdm660-gnoc + - qcom,sdm660-snoc + + then: + properties: + clock-names: + items: + - const: bus + - const: bus_a + + clocks: + items: + - description: Bus Clock + - description: Bus A Clock + + # Child node's properties + patternProperties: + '^interconnect-[a-z0-9]+$': + type: object + description: + snoc-mm is a child of snoc, sharing snoc's register address space. + + properties: + compatible: + enum: + - qcom,msm8939-snoc-mm + + '#interconnect-cells': + const: 1 + + clock-names: + items: + - const: bus + - const: bus_a + + clocks: + items: + - description: Bus Clock + - description: Bus A Clock + + required: + - compatible + - '#interconnect-cells' + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-mnoc + - qcom,sdm660-mnoc + + then: + properties: + clock-names: + items: + - const: bus + - const: bus_a + - const: iface + + clocks: + items: + - description: Bus Clock. + - description: Bus A Clock. + - description: CPU-NoC High-performance Bus Clock. + + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-a0noc + + then: + properties: + clock-names: + items: + - const: aggre0_snoc_axi + - const: aggre0_cnoc_ahb + - const: aggre0_noc_mpu_cfg + + clocks: + items: + - description: Aggregate0 System NoC AXI Clock. + - description: Aggregate0 Config NoC AHB Clock. + - description: Aggregate0 NoC MPU Clock. + + required: + - power-domains + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdm660-a2noc + + then: + properties: + clock-names: + items: + - const: bus + - const: bus_a + - const: ipa + - const: ufs_axi + - const: aggre2_ufs_axi + - const: aggre2_usb3_axi + - const: cfg_noc_usb2_axi + + clocks: + items: + - description: Bus Clock. + - description: Bus A Clock. + - description: IPA Clock. + - description: UFS AXI Clock. + - description: Aggregate2 UFS AXI Clock. + - description: Aggregate2 USB3 AXI Clock. + - description: Config NoC USB2 AXI Clock. + +examples: + - | + #include <dt-bindings/clock/qcom,rpmcc.h> + + bimc: interconnect@400000 { + compatible = "qcom,msm8916-bimc"; + reg = <0x00400000 0x62000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + + pcnoc: interconnect@500000 { + compatible = "qcom,msm8916-pcnoc"; + reg = <0x00500000 0x11000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + compatible = "qcom,msm8916-snoc"; + reg = <0x00580000 0x14000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml new file mode 100644 index 000000000..bbeb05415 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,rpmh-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect + +maintainers: + - Georgi Djakov <djakov@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + +properties: + '#interconnect-cells': + enum: [ 1, 2 ] + + qcom,bcm-voters: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 + maxItems: 2 + description: + List of phandles to qcom,bcm-voter nodes that are required by + this interconnect to send RPMh commands. + + qcom,bcm-voter-names: + maxItems: 2 + description: + Names for each of the qcom,bcm-voters specified. + +required: + - '#interconnect-cells' + - qcom,bcm-voters + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml new file mode 100644 index 000000000..a429a1ed1 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect + +maintainers: + - Georgi Djakov <georgi.djakov@linaro.org> + - Odelu Kukatla <okukatla@codeaurora.org> + +description: | + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + +allOf: + - $ref: qcom,rpmh-common.yaml# + +properties: + reg: + maxItems: 1 + + compatible: + enum: + - qcom,sc7180-aggre1-noc + - qcom,sc7180-aggre2-noc + - qcom,sc7180-camnoc-virt + - qcom,sc7180-compute-noc + - qcom,sc7180-config-noc + - qcom,sc7180-dc-noc + - qcom,sc7180-gem-noc + - qcom,sc7180-mc-virt + - qcom,sc7180-mmss-noc + - qcom,sc7180-npu-noc + - qcom,sc7180-qup-virt + - qcom,sc7180-system-noc + - qcom,sc7280-aggre1-noc + - qcom,sc7280-aggre2-noc + - qcom,sc7280-clk-virt + - qcom,sc7280-cnoc2 + - qcom,sc7280-cnoc3 + - qcom,sc7280-dc-noc + - qcom,sc7280-gem-noc + - qcom,sc7280-lpass-ag-noc + - qcom,sc7280-mc-virt + - qcom,sc7280-mmss-noc + - qcom,sc7280-nsp-noc + - qcom,sc7280-system-noc + - qcom,sc8180x-aggre1-noc + - qcom,sc8180x-aggre2-noc + - qcom,sc8180x-camnoc-virt + - qcom,sc8180x-compute-noc + - qcom,sc8180x-config-noc + - qcom,sc8180x-dc-noc + - qcom,sc8180x-gem-noc + - qcom,sc8180x-ipa-virt + - qcom,sc8180x-mc-virt + - qcom,sc8180x-mmss-noc + - qcom,sc8180x-qup-virt + - qcom,sc8180x-system-noc + - qcom,sc8280xp-aggre1-noc + - qcom,sc8280xp-aggre2-noc + - qcom,sc8280xp-clk-virt + - qcom,sc8280xp-config-noc + - qcom,sc8280xp-dc-noc + - qcom,sc8280xp-gem-noc + - qcom,sc8280xp-lpass-ag-noc + - qcom,sc8280xp-mc-virt + - qcom,sc8280xp-mmss-noc + - qcom,sc8280xp-nspa-noc + - qcom,sc8280xp-nspb-noc + - qcom,sc8280xp-system-noc + - qcom,sdm845-aggre1-noc + - qcom,sdm845-aggre2-noc + - qcom,sdm845-config-noc + - qcom,sdm845-dc-noc + - qcom,sdm845-gladiator-noc + - qcom,sdm845-mem-noc + - qcom,sdm845-mmss-noc + - qcom,sdm845-system-noc + - qcom,sdx55-mc-virt + - qcom,sdx55-mem-noc + - qcom,sdx55-system-noc + - qcom,sdx65-mc-virt + - qcom,sdx65-mem-noc + - qcom,sdx65-system-noc + - qcom,sm8150-aggre1-noc + - qcom,sm8150-aggre2-noc + - qcom,sm8150-camnoc-noc + - qcom,sm8150-compute-noc + - qcom,sm8150-config-noc + - qcom,sm8150-dc-noc + - qcom,sm8150-gem-noc + - qcom,sm8150-ipa-virt + - qcom,sm8150-mc-virt + - qcom,sm8150-mmss-noc + - qcom,sm8150-system-noc + - qcom,sm8250-aggre1-noc + - qcom,sm8250-aggre2-noc + - qcom,sm8250-compute-noc + - qcom,sm8250-config-noc + - qcom,sm8250-dc-noc + - qcom,sm8250-gem-noc + - qcom,sm8250-ipa-virt + - qcom,sm8250-mc-virt + - qcom,sm8250-mmss-noc + - qcom,sm8250-npu-noc + - qcom,sm8250-system-noc + - qcom,sm8350-aggre1-noc + - qcom,sm8350-aggre2-noc + - qcom,sm8350-config-noc + - qcom,sm8350-dc-noc + - qcom,sm8350-gem-noc + - qcom,sm8350-lpass-ag-noc + - qcom,sm8350-mc-virt + - qcom,sm8350-mmss-noc + - qcom,sm8350-compute-noc + - qcom,sm8350-system-noc + - qcom,sm8450-aggre1-noc + - qcom,sm8450-aggre2-noc + - qcom,sm8450-clk-virt + - qcom,sm8450-config-noc + - qcom,sm8450-gem-noc + - qcom,sm8450-lpass-ag-noc + - qcom,sm8450-mc-virt + - qcom,sm8450-mmss-noc + - qcom,sm8450-nsp-noc + - qcom,sm8450-pcie-anoc + - qcom,sm8450-system-noc + + '#interconnect-cells': true + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interconnect/qcom,sdm845.h> + + mem_noc: interconnect@1380000 { + compatible = "qcom,sdm845-mem-noc"; + reg = <0x01380000 0x27200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + compatible = "qcom,sdm845-mmss-noc"; + reg = <0x01740000 0x1c1000>; + #interconnect-cells = <1>; + qcom,bcm-voter-names = "apps", "disp"; + qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml new file mode 100644 index 000000000..49eb156b0 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sm6350-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6350 RPMh Network-On-Chip Interconnect + +maintainers: + - Luca Weiss <luca.weiss@fairphone.com> + +description: + Qualcomm RPMh-based interconnect provider on SM6350. + +allOf: + - $ref: qcom,rpmh-common.yaml# + +properties: + compatible: + enum: + - qcom,sm6350-aggre1-noc + - qcom,sm6350-aggre2-noc + - qcom,sm6350-config-noc + - qcom,sm6350-dc-noc + - qcom,sm6350-gem-noc + - qcom,sm6350-mmss-noc + - qcom,sm6350-npu-noc + - qcom,sm6350-system-noc + + reg: + maxItems: 1 + + '#interconnect-cells': true + +patternProperties: + '^interconnect-[a-z0-9\-]+$': + type: object + description: + The interconnect providers do not have a separate QoS register space, + but share parent's space. + $ref: qcom,rpmh-common.yaml# + + properties: + compatible: + enum: + - qcom,sm6350-clk-virt + - qcom,sm6350-compute-noc + + '#interconnect-cells': true + + required: + - compatible + + unevaluatedProperties: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + config_noc: interconnect@1500000 { + compatible = "qcom,sm6350-config-noc"; + reg = <0x01500000 0x28000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + compatible = "qcom,sm6350-system-noc"; + reg = <0x01620000 0x17080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sm6350-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + }; diff --git a/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml new file mode 100644 index 000000000..ad9ed596d --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml @@ -0,0 +1,290 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/samsung,exynos-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Bus and Interconnect + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + The Samsung Exynos SoC has many buses for data transfer between DRAM and + sub-blocks in SoC. Most Exynos SoCs share the common architecture for buses. + Generally, each bus of Exynos SoC includes a source clock and a power line, + which are able to change the clock frequency of the bus in runtime. To + monitor the usage of each bus in runtime, the driver uses the PPMU (Platform + Performance Monitoring Unit), which is able to measure the current load of + sub-blocks. + + The Exynos SoC includes the various sub-blocks which have the each AXI bus. + The each AXI bus has the owned source clock but, has not the only owned power + line. The power line might be shared among one more sub-blocks. So, we can + divide into two type of device as the role of each sub-block. There are two + type of bus devices as following:: + - parent bus device + - passive bus device + + Basically, parent and passive bus device share the same power line. The + parent bus device can only change the voltage of shared power line and the + rest bus devices (passive bus device) depend on the decision of the parent + bus device. If there are three blocks which share the VDD_xxx power line, + Only one block should be parent device and then the rest blocks should depend + on the parent device as passive device. + + VDD_xxx |--- A block (parent) + |--- B block (passive) + |--- C block (passive) + + There are a little different composition among Exynos SoC because each Exynos + SoC has different sub-blocks. Therefore, such difference should be specified + in devicetree file instead of each device driver. In result, this driver is + able to support the bus frequency for all Exynos SoCs. + + Detailed correlation between sub-blocks and power line according + to Exynos SoC:: + - In case of Exynos3250, there are two power line as following:: + VDD_MIF |--- DMC (Dynamic Memory Controller) + + VDD_INT |--- LEFTBUS (parent device) + |--- PERIL + |--- MFC + |--- G3D + |--- RIGHTBUS + |--- PERIR + |--- FSYS + |--- LCD0 + |--- PERIR + |--- ISP + |--- CAM + + - MIF bus's frequency/voltage table + ----------------------- + |Lv| Freq | Voltage | + ----------------------- + |L1| 50000 |800000 | + |L2| 100000 |800000 | + |L3| 134000 |800000 | + |L4| 200000 |825000 | + |L5| 400000 |875000 | + ----------------------- + + - INT bus's frequency/voltage table + ---------------------------------------------------------- + |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP |PERIL ||VDD_INT | + | name| |LCD0 | | | || | + | | |FSYS | | | || | + | | |MFC | | | || | + ---------------------------------------------------------- + |Mode |*parent|passive |passive|passive|passive|| | + ---------------------------------------------------------- + |Lv |Frequency ||Voltage | + ---------------------------------------------------------- + |L1 |50000 |50000 |50000 |50000 |50000 ||900000 | + |L2 |80000 |80000 |80000 |80000 |80000 ||900000 | + |L3 |100000 |100000 |100000 |100000 |100000 ||1000000 | + |L4 |134000 |134000 |200000 |200000 | ||1000000 | + |L5 |200000 |200000 |400000 |300000 | ||1000000 | + ---------------------------------------------------------- + + - In case of Exynos4210, there is one power line as following:: + VDD_INT |--- DMC (parent device, Dynamic Memory Controller) + |--- LEFTBUS + |--- PERIL + |--- MFC(L) + |--- G3D + |--- TV + |--- LCD0 + |--- RIGHTBUS + |--- PERIR + |--- MFC(R) + |--- CAM + |--- FSYS + |--- GPS + |--- LCD0 + |--- LCD1 + + - In case of Exynos4x12, there are two power line as following:: + VDD_MIF |--- DMC (Dynamic Memory Controller) + + VDD_INT |--- LEFTBUS (parent device) + |--- PERIL + |--- MFC(L) + |--- G3D + |--- TV + |--- IMAGE + |--- RIGHTBUS + |--- PERIR + |--- MFC(R) + |--- CAM + |--- FSYS + |--- GPS + |--- LCD0 + |--- ISP + + - In case of Exynos5422, there are two power line as following:: + VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller) + |--- DREX 1 + + VDD_INT |--- NoC_Core (parent device) + |--- G2D + |--- G3D + |--- DISP1 + |--- NoC_WCORE + |--- GSCL + |--- MSCL + |--- ISP + |--- MFC + |--- GEN + |--- PERIS + |--- PERIC + |--- FSYS + |--- FSYS2 + + - In case of Exynos5433, there is VDD_INT power line as following:: + VDD_INT |--- G2D (parent device) + |--- MSCL + |--- GSCL + |--- JPEG + |--- MFC + |--- HEVC + |--- BUS0 + |--- BUS1 + |--- BUS2 + |--- PERIS (Fixed clock rate) + |--- PERIC (Fixed clock rate) + |--- FSYS (Fixed clock rate) + +properties: + compatible: + enum: + - samsung,exynos-bus + + clocks: + maxItems: 1 + + clock-names: + items: + - const: bus + + devfreq: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Parent bus device. Valid and required only for the passive bus devices. + + devfreq-events: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 4 + description: + Devfreq-event device to monitor the current utilization of buses. Valid + and required only for the parent bus devices. + + exynos,saturation-ratio: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Percentage value which is used to calibrate the performance count against + total cycle count. Valid only for the parent bus devices. + + '#interconnect-cells': + const: 0 + + interconnects: + minItems: 1 + maxItems: 2 + + operating-points-v2: true + + samsung,data-clock-ratio: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 8 + description: + Ratio of the data throughput in B/s to minimum data clock frequency in + Hz. + + vdd-supply: + description: + Main bus power rail. Valid and required only for the parent bus devices. + +required: + - compatible + - clocks + - clock-names + - operating-points-v2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos3250.h> + + bus-dmc { + compatible = "samsung,exynos-bus"; + clocks = <&cmu_dmc CLK_DIV_DMC>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; + }; + + ppmu_dmc0: ppmu@106a0000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x106a0000 0x2000>; + events { + ppmu_dmc0_3: ppmu-event3-dmc0 { + event-name = "ppmu-event3-dmc0"; + }; + }; + }; + + bus_leftbus: bus-leftbus { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_GDL>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + }; + + bus-rightbus { + compatible = "samsung,exynos-bus"; + clocks = <&cmu CLK_DIV_GDR>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + devfreq = <&bus_leftbus>; + }; + + - | + dmc: bus-dmc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_DMC>; + clock-names = "bus"; + operating-points-v2 = <&bus_dmc_opp_table>; + samsung,data-clock-ratio = <4>; + #interconnect-cells = <0>; + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; + }; + + leftbus: bus-leftbus { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_GDL>; + clock-names = "bus"; + operating-points-v2 = <&bus_leftbus_opp_table>; + interconnects = <&dmc>; + #interconnect-cells = <0>; + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + }; + + display: bus-display { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DIV_ACLK_266>; + clock-names = "bus"; + operating-points-v2 = <&bus_display_opp_table>; + interconnects = <&leftbus &dmc>; + #interconnect-cells = <0>; + devfreq = <&leftbus>; + }; |