diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml new file mode 100644 index 000000000..d4da558cd --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8953-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. MSM8953 TLMM block + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + MSM8953 platform. + +properties: + compatible: + const: qcom,msm8953-pinctrl + + reg: + maxItems: 1 + + interrupts: + description: Specifies the TLMM summary IRQ + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + gpio-controller: true + + gpio-reserved-ranges: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, + qdsd_data1, qdsd_data2, qdsd_data3 ] + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ accel_int, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, + atest_char, atest_char0, atest_char1, atest_char2, atest_char3, + atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native, atest_tsens, + atest_wlan0, atest_wlan1, bimc_dte0, bimc_dte1, blsp1_spi, + blsp3_spi, blsp6_spi, blsp7_spi, blsp_i2c1, blsp_i2c2, blsp_i2c3, + blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_spi1, + blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, + blsp_spi8, blsp_uart2, blsp_uart4, blsp_uart5, blsp_uart6, cam0_ldo, + cam1_ldo, cam1_rst, cam1_standby, cam2_rst, cam2_standby, cam3_rst, + cam3_standby, cam_irq, cam_mclk, cap_int, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cdc_pdm0, codec_int1, codec_int2, codec_reset, cri_trng, cri_trng0, + cri_trng1, dac_calib0, dac_calib1, dac_calib10, dac_calib11, + dac_calib12, dac_calib13, dac_calib14, dac_calib15, dac_calib16, + dac_calib17, dac_calib18, dac_calib19, dac_calib2, dac_calib20, + dac_calib21, dac_calib22, dac_calib23, dac_calib24, dac_calib25, + dac_calib3, dac_calib4, dac_calib5, dac_calib6, dac_calib7, + dac_calib8, dac_calib9, dbg_out, ddr_bist, dmic0_clk, dmic0_data, + ebi_cdc, ebi_ch0, ext_lpass, flash_strobe, fp_int, gcc_gp1_clk_a, + gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, + gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gpio, gsm0_tx, gsm1_tx, + gyro_int, hall_int, hdmi_int, key_focus, key_home, key_snapshot, + key_volp, ldo_en, ldo_update, lpass_slimbus, lpass_slimbus0, + lpass_slimbus1, m_voc, mag_int, mdp_vsync, mipi_dsi0, modem_tsync, + mss_lte, nav_pps, nav_pps_in_a, nav_pps_in_b, nav_tsync, + nfc_disable, nfc_dwl, nfc_irq, ois_sync, pa_indicator, pbs0, pbs1, + pbs2, pressure_int, pri_mi2s, pri_mi2s_mclk_a, pri_mi2s_mclk_b, + pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_down, pwr_modem_enabled_a, pwr_modem_enabled_b, + pwr_nav_enabled_a, pwr_nav_enabled_b, qdss_cti_trig_in_a0, + qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, + qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b, + qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, + qdss_tracedata_b, sd_write, sdcard_det, sec_mi2s, sec_mi2s_mclk_a, + sec_mi2s_mclk_b, smb_int, ss_switch, ssbi_wtr1, ts_resout, + ts_sample, ts_xvdd, tsens_max, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, + uim_batt, us_emitter, us_euro, wcss_bt, wcss_fm, wcss_wlan, + wcss_wlan0, wcss_wlan1, wcss_wlan2, wsa_en, wsa_io, wsa_irq ] + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8953-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 142>; + + serial_default: serial-pins { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; + }; + }; |