diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi/ti_qspi.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/spi/ti_qspi.txt | 53 |
1 files changed, 53 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt new file mode 100644 index 000000000..47b184bce --- /dev/null +++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt @@ -0,0 +1,53 @@ +TI QSPI controller. + +Required properties: +- compatible : should be "ti,dra7xxx-qspi" or "ti,am4372-qspi". +- reg: Should contain QSPI registers location and length. +- reg-names: Should contain the resource reg names. + - qspi_base: Qspi configuration register Address space + - qspi_mmap: Memory mapped Address space + - (optional) qspi_ctrlmod: Control module Address space +- interrupts: should contain the qspi interrupt number. +- #address-cells, #size-cells : Must be present if the device has sub-nodes +- ti,hwmods: Name of the hwmod associated to the QSPI + +Recommended properties: +- spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: +- syscon-chipselects: Handle to system control region contains QSPI + chipselect register and offset of that register. + +NOTE: TI QSPI controller requires different pinmux and IODelay +parameters for Mode-0 and Mode-3 operations, which needs to be set up by +the bootloader (U-Boot). Default configuration only supports Mode-0 +operation. Hence, "spi-cpol" and "spi-cpha" DT properties cannot be +specified in the slave nodes of TI QSPI controller without appropriate +modification to bootloader. + +Example: + +For am4372: +qspi: qspi@47900000 { + compatible = "ti,am4372-qspi"; + reg = <0x47900000 0x100>, <0x30000000 0x4000000>; + reg-names = "qspi_base", "qspi_mmap"; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <25000000>; + ti,hwmods = "qspi"; +}; + +For dra7xx: +qspi: qspi@4b300000 { + compatible = "ti,dra7xxx-qspi"; + reg = <0x4b300000 0x100>, + <0x5c000000 0x4000000>, + reg-names = "qspi_base", "qspi_mmap"; + syscon-chipselects = <&scm_conf 0x558>; + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <48000000>; + ti,hwmods = "qspi"; +}; |